Markforged Holding Corp - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

OR

Commission File Number 001-39453

Markforged Holding Corporation

(Exact name of Registrant as specified in its Charter)

Registrant’s telephone number, including area code: (866) 496-1805

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES ☐ No ☒

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. YES ☐ No ☒

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ NO ☐

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). Yes ☒ NO ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES ☐ No ☒

Based on the closing price as reported on the New York Stock Exchange, the aggregate market value of the Registrant’s Common Stock held by non-affiliates on June 30, 2021 (the last business day of the Registrant’s most recently completed second fiscal quarter) was approximately $214.8 million. Shares of Common Stock held by each executive officer and director and by each shareholder affiliated with a director or an executive officer have been excluded from this calculation because such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

The number of shares of Registrant’s Common Stock outstanding as of March 30, 2022 was 187,102,821.

DOCUMENTS INCORPORATED BY REFERENCE

Risk Factors Summary

The risk factors detailed in Item 1A entitled “Risk Factors” in this Annual Report on Form 10-K are the risks that we believe are material to our investors and a reader should carefully consider them. Those risks are not all of the risks we face and other factors not presently known to us or that we currently believe are immaterial may also affect our business if they occur. The following is a summary of the risk factors detailed in Item 1A:

i

EXPLANATORY NOTE

On July 14, 2021, we consummated the merger (the “Merger”) contemplated by the Agreement and Plan of Merger, dated as of February 23, 2021 (the “Merger Agreement”), by and among one, a Cayman Islands exempted company limited by shares (“one”), Caspian Merger Sub Inc., a Delaware corporation and a wholly owned subsidiary of one (“Merger Sub”), and MarkForged, Inc., a Delaware corporation (“Legacy Markforged”). As a result of the Merger, Legacy Markforged merged with and into Merger Sub with Legacy Markforged surviving as our wholly-owned subsidiary and, following one’s filing of a notice of deregistration and necessary accompanying documents with the Cayman Islands Registrar of Companies, and a certificate of incorporation and a certificate of corporate domestication with the Secretary of State of the State of Delaware, under which one was domesticated, one changed its name to “Markforged Holding Corporation.”

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains statements that are forward-looking and as such are not historical facts. This includes, without limitation, statements regarding the financial position, business strategy and the plans and objectives of management for our future operations. These statements constitute projections, forecasts and forward-looking statements, and are not guarantees of performance. Such statements can be identified by the fact that they do not relate strictly to historical or current facts. When used in this Annual Report on Form 10-K, words such as “anticipate”, “believe”, “continue”, “could”, “estimate”, “expect”, “intend”, “may”, “might”, “plan”, “possible”, “potential”, “predict”, “project”, “should”, “strive”, “would” and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward-looking.

Forward-looking statements in this Annual Report on Form 10-K include, for example, statements about:

ii

These forward-looking statements are based on information available as of the date of this Annual Report on Form 10-K and current expectations, forecasts and assumptions, and involve a number of judgments, risks and uncertainties. Accordingly, forward-looking statements should not be relied upon as representing our views as of any subsequent date, and we do not undertake any obligation to update forward-looking statements to reflect events or circumstances after the date they were made, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.

As a result of a number of known and unknown risks and uncertainties, our actual results or performance may be materially different from those expressed or implied by these forward-looking statements. You should not place undue reliance on these forward-looking statements.

iii

Table of Contents

iv

PART I

Item 1. Business.

Unless the context otherwise requires, all references in this section to the “company”, “we”, “us”, or “our” refer to the business of MarkForged, Inc. and its subsidiaries prior to the consummation of the Merger and to Markforged Holding Corporation and its subsidiaries after giving effect to the Merger.

Company Overview

Our platform, The Digital Forge, is an intuitive additive manufacturing platform powering engineers, designers and manufacturing professionals globally. The Digital Forge combines precise & reliable 3D printers and metal and composite proprietary materials with its cloud-based learning software offering to empower manufacturers to create more resilient and agile supply chains. Founded in 2013 by two MIT-educated engineers, Markforged is based in greater Boston, Massachusetts, where we have our own in-house manufacturing facility and where we design all of our industrial 3D printers, software and metal and composite proprietary materials.

Designed to scale into the future, our software-enabled platform delivers clear value today to thousands of customers (including both direct customers and customers of our value added resellers that have purchased one or more of our products) around the world. Our customers have printed millions of parts, meeting customer needs across the entire product development lifecycle, including prototyping, tooling, production and aftermarket spares and replacement parts as well as mid-volume and high-volume production parts. Blue chip customers in leading-edge industries such as aerospace, military and defense, industrial automation, space exploration, healthcare and automotive rely on our platform for mission-critical, end-use parts on-demand and at the point-of-need.

Our portfolio of rugged 3D printers include: (i) desktop printers that produce quality parts in settings where space is limited, (ii) industrial composite printers that provide powerful, predictable functionality through their software, sensors, materials and print modes and (iii) metal printers that can fabricate strong, complex metal parts in a variety of advanced metals. Across all our models, our powerful yet easy-to-use platform, and our industrial-grade materials, enable engineers to make functional parts for manufacturing environments and other demanding applications.

Our software platform was developed alongside our first printers and shipped as a fully integrated solution. As we have grown, we have continued to develop and scale our software, providing a single platform to interact with each of our hardware devices and driving consistent reliability for our customers. From simple file storage and versioning to accessible live telemetry, our products are designed to address the unseen minutiae that can inhibit manufacturers’ productivity. In a manufacturing ecosystem inundated with non-intuitive user experiences, the simplicity and power of our software drives adoption of our platform with higher customer satisfaction and retention rates.

Today, manufacturers face many limitations from idea generation to finished industrial goods. Part design is inherently limited by traditional subtractive manufacturing methods, such as Computer Numerically Controlled (“CNC”) machining. In addition, in many cases, the existing manufacturing workforce does not have the necessary skills to meet the demands of the next generation of manufacturing, which is embracing digital technologies.

We envision a different future where smart 3D printers distributed in networks that extend directly to the point-of-need can overcome these limitations. We are working to make this future a reality today. For example, a military customer stations Markforged printers in combat zones to create digital supply chains, producing parts in the field, on-demand. A state government customer recently sponsored a pandemic-readiness project that distributed 300 Markforged printers across the state to create a large emergency alert system for manufacturing physical parts on demand. As a further example, a global consumer products company has utilized Markforged printers in more than 30 factories to optimize assembly line production. As we continue to innovate with faster, larger and more precise machines capable of reliably printing more specific materials, we expect to see examples like these scale in both the value they deliver our customers and the impact of additive technology on the broader manufacturing industry.

1

In 2014, we first commercialized our patented Continuous Fiber Reinforcement (“CFR”), which is a process that uses continuous strands of composite fibers to make parts as strong as and capable of replacing aluminum. In 2018, we released the Metal X system, which is now capable of printing 17-4 PH Stainless Steel, Copper, H13 Tool Steel, Inconel 635, and A2 and D2 Tool Steel in a shop or office environment. These products connect to our secure cloud infrastructure and are controlled via web browser, providing a single, simple digital workflow for printing both carbon fiber and metal for organizations that scale from one user to thousands. We have the ability to leverage data from our existing global fleet of printers connected to cloud architecture to enhance our research and development capabilities for the future benefit of our customers. The data generated by our fleet of thousands of connected printers flows into Blacksmith, an AI-powered, closed-loop manufacturing solution, which is currently offered as a software subscription.

For the years 2012 to 2020, according to the Wohlers Report 2021, the additive manufacturing industry grew at a CAGR of 24%, from $2 billion in 2012 to $12 billion in 2020. The Wohlers Report 2021 projects that for the 10 year period of 2020 to 2030, the additive manufacturing industry will grow at a similar CAGR of 25%, reaching $115 billion in 2030. As additive manufacturing technology adoption spreads across the $13 trillion global manufacturing industry, we believe we are well-positioned to take advantage of these trends due to our industry-leading materials, broad portfolio of products, and a cloud architecture that continually learns and will improve our global fleet of industrial printers.

The Markforged team combines cutting-edge technical expertise with industry experience in commercializing new technologies. Shai Terem, our President and Chief Executive Officer, is a veteran of the digital printing technology industry previously serving as President of the Americas at Kornit, where he led an aggressive and successful restructuring of the region and, prior to that, as Americas VP of Finance & Operations for Stratasys, where he held several operational responsibilities within the company. Mark Schwartz, our Chief Financial Officer, has extensive experience as a public company Chief Financial Officer as well as leading capital market transactions and as part of management teams at high-growth hardware manufacturing and SaaS and AI companies.

Industry Background

Traditional Manufacturing Faces Many Limitations.

Engineers and product developers are constrained by the physical parameters of conventional manufacturing processes. These parameters define the design possibilities, adding cost and lead time to manufacturing programs and placing firm boundaries on the performance of parts and products. Additive manufacturing lifts many of these limitations, opening up new design capabilities that allow engineers to harness and sustain measurable advantages in durability, weight and customizability.

Traditional manufacturing faces significant limitations that impact profitability and market responsiveness. In mature economies, like the United States, manufacturers find it increasingly difficult to hire the skilled technicians required to operate the legacy equipment that powers a majority of manufacturing operations. According to a 2020 report from The Economist, the generation of specialized tool and die makers that are exiting the labor market and the emerging workforce that is replacing these individuals are trained on completely different educational foundations built on information technology and digital aptitude.

We believe this phenomenon will intensify the struggle to find skilled technicians for businesses that fail to adopt modern manufacturing technologies.

Traditional manufacturing equipment and labor conditions require complex networks of supply sources or “nodes”, connected to one or more manufacturing hubs. These manufacturing hubs rely on intricate chains of logistics and distribution to deliver their products to the market and into the hands of end customers. Each supply node, manufacturing site and logistics bridge represents a single point of failure that has the potential to compromise business continuity and customer relationships in the event of disruptions. For example, the COVID-19 pandemic caused plant shutdowns, shipping port closures, labor strikes and myriad unforeseen changes in operating conditions. Digital manufacturing decouples part production from these complex and vulnerable supply chains, empowering individual “makers” and large, global businesses alike to position fabrication capabilities as close to the point of need as possible.

This flexibility also allows modern manufacturers to adapt to changing demand signals with greater responsiveness. As an example, in the early months of the COVID-19 pandemic, the collective 3D printing community was able to quickly produce early batches of face shields and other personal protective equipment. In contrast, many traditional manufacturers struggled in the face of global supply chain disruptions and significant spikes in demand for key products.

According to a Forbes article published on October 18, 2019, approximately 20% of every dollar in manufacturing is wasted. Additionally, the complex web of logistics and transportation required to convert raw material into goods in end customers’ hands add many wasteful steps. These factors increase costs to manufacturing programs and incur substantial carbon footprints. As modern

2

businesses seek opportunities to reduce their ecological impacts, both due to proactive and conscientious attitudes as well as government regulations and emissions penalties, we believe that digital manufacturing solutions like The Digital Forge present a viable means of producing products more sustainably and at a lower cost.

Additive Manufacturing has the Potential to Overcome Many of these Limitations.

Additive manufacturing as a category has the potential to overcome many of the limitations of conventional manufacturing. The new design capabilities provide significant possibilities for superior products that drive higher performance and more closely match customer preferences. The simple, empowering interfaces used to operate our printers are more applicable to an emerging workforce that consists of digital natives trained in IT educational foundations. With additive manufacturing technology, manufacturers may now combat supply chain constraints, allowing them to respond more quickly to sharp changes in demand signals. Machines the size of microwave ovens that require no skilled labor can now help manufacturers circumvent expensive and time-consuming supply chains by printing parts when and where they are needed.

Most 3D Printing Solutions Today are Focused on Design and Prototyping Applications.

Despite the apparent benefits of additive manufacturing relative to conventional manufacturing, it has taken the industry nearly four decades to arrive at a solution that is widely adopted for applications beyond one-offs and prototypes. Part of the reason for such slow adoption is that before Markforged, there were only two limited categories of 3D printers available. On one end of the cost spectrum, there were relatively inexpensive machines that printed in brittle plastic, only suitable for concept models or mock-ups. On the other end of the cost spectrum, there were complicated, potentially hazardous systems that cost in excess of $1 million to implement and required highly skilled technicians to operate. Additionally, both categories were engineered as point solutions for a single factory, making distributed digital manufacturing across a network of printers cumbersome or infeasible. For these reasons, neither of these choices was appropriate for the manufacturing floor or distributed manufacturing at scale.

Markforged is Delivering the Promise of Additive Manufacturing Today.

We invented The Digital Forge, a platform designed to overcome both the constraints of conventional manufacturing as well as the limitations of legacy 3D printing solutions. Manufacturers can produce parts that are functionally applicable for the most demanding engineering applications on affordable machines roughly the size of a microwave or conventional oven. The parts printed on The Digital Forge are based in continuous carbon fiber, a high-strength material that empowers engineers to use the parts for applications that were previously reserved for metal parts. Moreover, the software that powers The Digital Forge was designed to be cloud-first. In contrast to legacy additive solutions, Markforged’s printers can be accessed and controlled from anywhere in the world and entire libraries of part inventory can be digitized and printed only when needed. This smart, simple, empowering and robust platform is designed to give engineers, designers and manufacturing professionals the power to solve their manufacturing problems today and build anything they imagine.

Our Growth Strategy

Our future growth is driven by five key strategies:

3

Our Competitive Strengths

The Digital Forge

The Digital Forge is the intuitive additive manufacturing platform for modern manufacturers, bringing the power and speed of agile software development to industrial manufacturing. Composed of hardware, software and materials working as a unified platform, it is purpose-built to integrate into our customers’ existing manufacturing ecosystems and eliminate the barriers between design and functional parts. The Digital Forge adopters can achieve immediate benefits through savings of time and money on end-use parts. Through increased adoption, the platform can drive competitive advantages by making our customers’ entire operations more efficient and responsive.

3D Printers

We offer a rugged line of 3D printers all designed around one goal - putting functional parts in our customers’ hands. Our machines combine high build quality, intuitive user experience and broad platform connectivity. Featuring unibody aluminum frames and precision mechanical components, our printers produce reliable, repeatable results.

4

We offer three principal categories of 3D printers and systems:

In November 2021, we debuted the FX20™ industrial 3D printer which is capable of printing high-temperature thermoplastics reinforced with continuous carbon fiber. This is the largest and most precise machine we have produced to date.

We also offer the Onyx Pro, Onyx One, Mark Two desktop composite printers, the X3, X5, X7 industrial composite printers, a ruggedized X7 Field Edition composite printer, and the Wash-1, Sinter-1, and Sinter-2 which are components of the Metal X system.

Materials

We offer the only industrial 3D printing family for fabricating Composite, Continuous Fiber and Metal parts on the same platform. All the materials available for printing on The Digital Forge are safe and easy to handle and offer a high degree of flexibility for part design and manufacturing. Our 3D printers are simple to use and do not require intensive buildouts or trained technicians. We currently offer the following materials:

Our customers can print the right material for the right applications. If a customer requires strength and low weight, composites can replace metal parts and accelerate production times. If customers need something to withstand high temperatures and provide wear resistance, metals can be utilized. In addition, customers can combine parts made of different materials for even higher-performing parts using the CFR process.

CFR augments traditional Fused Filament Fabrication (“FFF”) technology, enabling our printers to reinforce FFF parts with continuous fibers. A CFR-capable machine uses two extrusion systems for two unique materials: one for conventional FFF polymer filament, and a second for long strand continuous fibers. Continuous fibers are laid down in-layer, replacing FFF infill. As a result, a CFR-capable printer can print both traditional FFF-only parts or CFR parts (FFF parts reinforced with continuous fibers).

CFR represents a step-change improvement in part performance for only an incremental increase in effort. CFR parts are significantly stronger (up to 25 times stronger than ABS plastics) and can replace machined aluminum parts. The process is inherently flexible: simple enough for anyone to use and powerful enough to enable deep customization of part mechanical properties. This means that an engineer can reinforce a part with continuous fibers with two clicks of a button and customize reinforcement on a layer-by-layer basis on the same platform. With five available fibers and multiple reinforcement techniques that can be granularly configured, parts can be highly customized for applications. We believe the capabilities that CFR enables are unmatched by current alternatives.

Software

Our software pairs advanced 3D printing software with the first connected additive manufacturing platform. Our software is an integrated platform designed to help customers get from design to part quickly. It empowers users to take control of their manufacturing workflow in three ways:

5

Customers

We have thousands of customers (including both direct customers and customers of our value added resellers that have purchased one or more of our products) around the world, and have printed millions of parts, meeting customer needs across the entire product development lifecycle, including prototyping, tooling, production and aftermarket spare and replacement parts. Our customers range from small and medium-sized organizations to Fortune 100 companies in leading edge industries such as aerospace, military and defense, industrial automation, space exploration, healthcare and automotive who utilize our platform for mission critical end-use parts on-demand and at the point-of-need.

Our customer base is diverse and broad, with no customer, or customers known to us to be under common control, comprising more than 10% of our business.

Research and Development

Investment in research and development is at the core of our business strategy. Our research and development team is responsible for designing, developing and enhancing our products, as well as performing product testing and quality assurance activities. Members of our research and development team specialize in mechanical engineering, electrical engineering, material science, product realization and software engineering.

Research and development expense totaled $32.2 million and $17.2 million in the years ended December 31, 2021 and 2020, respectively. We expect our research and development expense to increase significantly for the foreseeable future as we enhance existing products, develop new products for current markets and introduce new products in new markets.

The majority of our research and development operations are conducted in our facility in Watertown, Massachusetts.

Sales and Marketing

We primarily sell our products and services through a global channel of third-party value-added reseller partners (“VARs”). We have approximately 100 VARs spanning the globe with over a thousand full-time employees who market, sell and support our platform. Our VAR channel allows us to have global scale, engage deeply with our customers and provide significant operating leverage to our business. We have and will continue to optimize our VAR network focused on global manufacturing. This includes VARs such as DesignPoint, Hawk Ridge Systems, LLC, GovSmart, Inc. MLC CAD Systems, LLC, Mark3D UK Limited, and others, that distribute mission-critical end-use parts and functional parts for the manufacturing floor to hundreds of thousands of end customers worldwide.

Our global marketing team drives new customer acquisition, retention and expansion of existing customers and the demonstration and capabilities set of our products.

Manufacturing and Suppliers

Our goal is to create an excellent customer experience by shipping quality products on time and providing meaningful support after delivery, all while working safely. We work toward this goal by being selective with our resources, dedicating our focus to areas where we see a strategic advantage, and working with high quality outsourced partners to manage the rest. Our printer manufacturing operations include both our internal manufacturing facility in Billerica, Massachusetts as well as third-party contract manufacturers who source materials, manufacture components and assemble products in accordance with our specifications and quality standards. We currently source and manufacture our consumable materials, which provides flexibility, increased responsiveness and a distinct competitive advantage.

6

Our Competition

The industry in which we operate is fragmented and competitive. We compete for customers with a wide variety of conventional and additive manufacturing solution providers. We believe that the market is in its early phases of adoption of additive manufacturing technology, and that the potential for growth will be significant as our target customers seek more flexible, customized, software-enabled manufacturing processes.

We believe we compare favorably to other industry participants on the basis of the following competitive factors applicable to our products:

Human Capital

We consider our employees to be critical to our success. As of December 31, 2021, we had 374 full-time employees based primarily in the greater Boston, Massachusetts area. A majority of our employees are engaged in engineering, operations and related functions. To date, we have not experienced any work stoppages and consider our relationship with our employees to be in good standing. None of our employees are subject to a collective bargaining agreement or represented by a labor union.

Our success depends upon our ability to attract and retain highly qualified employees. We are committed to creating and maintaining an inclusive culture which values equality, opportunity and respect. We expect all of our employees to observe the highest levels of business ethics, integrity, mutual respect, tolerance and inclusivity. Our employee handbook and Code of Conduct and Ethics set forth policies reflecting these values and also provide direction for registering complaints in the event of any violation of our policies. An “open door” policy is maintained at all levels of the organization and any form of retaliation against an employee is strictly prohibited.

The success of our business is fundamentally connected to the physical and mental well-being of our people. Accordingly, we are committed to the health, safety and wellness of our employees and contractors. We provide our employees with a wide range of benefits, including benefits directed to their health, safety and long-term financial security. In response to the COVID-19 pandemic, we have implemented significant changes that we determined were in the best interest of our employees, as well as the communities in which we operate, and which comply with government regulations. This includes allowing our employees to work remotely as appropriate, while implementing significant safety measures designed to protect the health of all those working in and entering our facilities.

Intellectual Property

Our ability to drive innovation in the additive manufacturing market depends in part upon our ability to protect our core technology and intellectual property. We attempt to protect our intellectual property rights, both in the United States and abroad, through a combination of patent, trademark, copyright and trade secret laws, as well as through contractual provisions and restrictions on access to our proprietary technology which includes nondisclosure and invention assignment agreements with our consultants and employees and through non-disclosure agreements with our vendors and business partners. We further control the use of our proprietary technology and intellectual property through provisions in both general and product-specific terms of use. Unpatented research, development, know-how and engineering skills make an important contribution to our business, but we pursue patent protection when we believe it is possible and consistent with our overall strategy for safeguarding intellectual property.

As of December 31, 2021, we own 50 issued United States patents, 36 issued foreign patents and have 109 pending or allowed patent applications. Our patents and patent applications are directed to, among other things, additive manufacturing and related technologies.

7

We have 2 issued United States trademarks and 20 issued foreign trademarks, including “Markforged” in the European Union, Australia, Canada, China, Israel, Japan, and the Republic of Korea. We have no pending United States trademark applications and 3 pending foreign applications.

Government Regulations

We are subject to various laws, regulations and permitting requirements of federal, state and local authorities, including related to environmental, health and safety; anti-corruption and export controls. We believe that we are in material compliance with all such laws, regulations and permitting requirements.

Environmental Matters

We are subject to domestic and foreign environmental laws and regulations governing our operations, including, but not limited to, emissions into the air and water and the use, handling, disposal and remediation of hazardous substances. A certain risk of environmental liability is inherent in our production activities. These laws and regulations govern, among other things, the generation, use, storage, registration, handling and disposal of chemicals and waste materials, the presence of specified substances in electrical products, the emission and discharge of hazardous materials into the ground, air or water, the cleanup of contaminated sites, including any contamination that results from spills due to our failure to properly dispose of chemicals and other waste materials and the health and safety of our employees. We are required to obtain environmental permits from governmental authorities for certain operations.

The export of our products internationally from our production facilities subjects us to environmental laws and regulations concerning the import and export of chemicals and hazardous substances such as the United States Toxic Substances Control Act (“TSCA”) and the Registration, Evaluation, Authorization and Restriction of Chemical Substances (“REACH”). These laws and regulations require the evaluation and registration of some chemicals that we ship along with, or that form a part of, our systems and other products.

Export and Trade Matters

We are subject to anti-corruption laws and regulations imposed by governments around the world with jurisdiction over our operations, including the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act 2010, as well as the laws of the countries where we do business. We are also subject to various trade restrictions, including trade and economic sanctions and export controls, imposed by governments around the world with jurisdiction over our operations. For example, in accordance with trade sanctions administered by the Office of Foreign Assets Control and the U.S. Department of Commerce, we are prohibited from engaging in transactions involving certain persons and certain designated countries or territories. In addition, our products are subject to export regulations that can involve significant compliance time and may add additional overhead cost to our products. In recent years, the United States government has a renewed focus on export matters related to additive manufacturing. Some of our products are already more tightly controlled for export, and other of our products may in the future become more tightly controlled for export. For example, the Export Control Reform Act of 2018 and regulatory guidance thereunder have imposed additional controls and may result in the imposition of further additional controls, on the export of certain “emerging and foundational technologies.” Our current and future products may be subject to these heightened regulations, which could increase our compliance costs.

Corporate Information

Prior to July 14, 2021, we were a blank check company known as one incorporated in the Cayman Islands on June 24, 2020 as a Cayman Islands exempted company for the purpose of effecting a merger, share exchange, asset acquisition, share purchase, reorganization or similar business combination with one or more businesses. Legacy Markforged was formed as a Delaware corporation in 2013.

On July 14, 2021, we completed the Merger. In connection with the completion of the Merger, one was renamed Markforged Holding Corporation. Our website address is www.markforged.com. Our website and the information contained on, or that can be accessed through, the website will not be deemed to be incorporated by reference in, and are not considered part of, this Annual Report on Form 10-K.

We are an “emerging growth company” as defined in the Jumpstart Our Business Startups Act of 2012. We will remain an emerging growth company until the earlier of: (i) the last day of the fiscal year (a) following the fifth anniversary of the completion of the IPO, (b) in which we have total annual gross revenue of at least $1.07 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our common stock that is held by non-affiliates exceeds $700.0 million as of the prior June 30th, and (ii) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period.

8

Available Information

Our website address is www.markforged.com. Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, including exhibits, proxy and information statements and amendments to those reports filed or furnished pursuant to Sections 13(a), 14, and 15(d) of the Securities Exchange Act of 1934, as amended, or the Exchange Act, are available through the “Investor Relations” portion of our website free of charge as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. Information on our website is not part of this Annual Report on Form 10-K or any of our other securities filings unless specifically incorporated herein by reference. In addition, our filings with the SEC may be accessed through the SEC’s Interactive Data Electronic Applications system at www.sec.gov. All statements made in any of our securities filings, including all forward-looking statements or information, are made as of the date of the document in which the statement is included, and we do not assume or undertake any obligation to update any of those statements or documents unless we are required to do so by law.

Our code of conduct, corporate governance guidelines and the charters of our Audit Committee, Compensation Committee and Nominating and Corporate Governance Committee are available through the “Investor Relations” portion of our website.

9

Item 1A. Risk Factors.

Risk Factors

A description of the risks and uncertainties associated with our business and industry is set forth below. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including our consolidated financial statements and notes thereto and the “Management’s discussion and analysis of financial condition and results of operations” section of this Annual Report on Form 10-K before deciding whether to purchase shares of our common stock. If any of the following risks are realized, our business, financial condition, operating results and prospects could be materially and adversely affected. In that event, the price of our common stock could decline, perhaps significantly. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operation.

Risks Related to Our Business and Industry

Risks Related to Our Operating History

We have a history of net losses and may not be able to achieve profitability for any period in the future or sustain cash flow from operating activities.

We had a history of losses since inception in 2013 until 2021 and funded our cash flow deficits primarily through the issuance of capital stock. As of December 31, 2021, we had an accumulated deficit of $75.7 million, including current year net profit of $3.9 million. We expect to continue to incur operating losses and negative cash flow as we continue to invest significantly in research and development efforts, sales and marketing and other aspects of our business.

We cannot make any assurances that these investments will result in increased revenue or growth in our business. Additionally, as a public company, we expect our legal, accounting and other expenses to be substantially higher than the expenses we incurred as a private company. Furthermore, we may encounter unforeseen issues that require us to incur additional costs. Any such increased expenditures make it harder for us to achieve and maintain future profitability. Revenue growth and growth in our customer base may not be sustainable, and we may not achieve sufficient revenue to achieve or maintain profitability. While we have a revenue history, we expect to bring new additive manufacturing products to market that we anticipate will generate a substantial portion of our future revenue, and it is difficult for us to predict our future operating results. We may incur significant losses in the future for a number of reasons, including due to the other risks described in this Annual Report on Form 10-K, and we may encounter unforeseen expenses, difficulties, complications and delays and other unknown events. As a result, our losses may exceed forecasts, we may incur significant losses for the foreseeable future, and we may not achieve profitability when expected, or at all, and even if we do, we may not be able to maintain or increase profitability. Accordingly, if we are not able to achieve or maintain profitability and we incur significant losses in the future, the market price of our common stock may decline, and you could lose part or all of your investment.

We have a relatively limited operating history and have experienced rapid growth, which makes evaluating our current business and future prospects difficult and may increase the risk of your investment.

Our ability to forecast our future operating results is subject to a number of uncertainties, including our ability to plan for and model future growth. We have encountered, and will continue to encounter, risks and uncertainties frequently experienced by growing companies in rapidly evolving industries, as we continue to grow our business. If our assumptions regarding these uncertainties, which we use to plan our business, are incorrect or change in reaction to changes in our markets, or if we do not address these risks successfully, our operating and financial results could differ materially from our expectations, our business could suffer and the trading price of our stock may decline. We intend to derive a substantial portion of our revenues from sales of new and existing hardware products, which sales are non-recurring and subject to significant risk and fluctuation.

It is difficult to predict our future revenues and appropriately budget for our expenses, and we have limited insight into trends that may emerge and affect our business. If actual results differ from our estimates or we adjust our estimates in future periods, our operating results and financial position could be materially affected.

Our operating results may fluctuate significantly from period-to-period and may fall below expectations in any particular period, which could adversely affect the market price of our common stock.

Our quarterly and annual results of operations may fluctuate significantly from period-to-period. Accordingly, the results of any one quarter or year should not be relied upon as an indication of future performance. If our revenue or operating results fall below the expectations of investors or any securities analysts that follow our company in any period, the price of our common stock would likely

10

decline. Each of the risks described in this section, as well as other factors, may affect our operating results. For example, factors that may cause our operating results to fluctuate include:

In addition, sales of our products are subject to the adoption and capital expenditure cycles of our customers' sales cycle, and seasonality among our customers may cause our revenues and operating results to fluctuate from period to period. Accordingly, we typically experience increased sales during the fourth quarter and, to a lesser extent, the third quarter of our fiscal year relative to the first and second quarters. Additionally, for our more complex solutions, which may require additional facilities investment and installation support, potential customers may spend a substantial amount of time performing internal assessments prior to making a purchase decision. This may cause us to devote significant effort in advance of a potential sale without any guarantee of receiving any related revenues. As a result, revenues and operating results for future periods are difficult to predict with any significant degree of certainty, which could lead to adverse effects on our inventory levels and overall financial condition. Accordingly, you should not rely on quarter-over-quarter and year-over-year comparisons of our results as an indicator of our future performance.

The global COVID-19 pandemic has significantly affected our business and operations.

The COVID-19 pandemic and efforts to control its spread have significantly curtailed the movement of people, goods and services worldwide. In light of the uncertain situation relating to the spread of COVID-19 and new variants of the virus, we have taken precautionary measures intended to minimize the risk of the virus to our employees, our customers and the communities in which we operate. These measures include temporarily closing our offices to visitors and limiting the number of employees in our offices to those that are deemed essential for manufacturing and research purposes, as well as virtualizing, postponing or canceling customer, employee and industry events.

The COVID-19 pandemic has also created many negative headwinds that present risks to our business and results of operations. For example, it has generally disrupted the operations of our customers and prospective customers, and may continue to disrupt their operations, including as a result of travel restrictions and/or business shutdowns, uncertainty in the financial markets or other harm to their business and financial results. These disruptions have caused reduced capital expenditures by our existing customers and potential new customers, which negatively impacted our sales, especially during the period between March 2020 and May 2020 in

11

which we experienced a decrease in sales compared to the relevant period in 2019. This reduction was particularly prevalent among customers that are large companies purchasing our more expensive products that require greater on-site installation support. Further, in April 2020, we conducted a reduction in force as a result of reduced demand for our products and uncertainty about future revenues. Because the future effects of the COVID-19 pandemic are unpredictable, the impact could be more prolonged and significant in the future. These disruptions could result in further reductions to capital expenditure budgets, delayed purchasing decisions, longer sales cycles, extended payment terms or missed payments, and postponed or canceled projects, any of which would negatively impact our business and operating results, including sales and cash flows. We cannot predict the long-term impact that the COVID-19 pandemic may have on our business and cannot guarantee that it will not be materially negative. Although vaccines have become available to the public and states, including Massachusetts where our headquarters is located, have begun to ease certain restrictions, we continue to monitor the situation and may adjust our current policies as more information and public health guidance become available, the ongoing effects of the COVID-19 pandemic and/or the precautionary measures that we have adopted may create operational and other challenges, any of which could harm our business and results of operations.

On September 9, 2021, President Biden directed the Department of Labor’s Occupational Safety and Health Administration (“OSHA”) to issue an Emergency Temporary Standard (“ETS”) requiring that all employers with at least 100 employees ensure that their employees are fully vaccinated for COVID-19 or obtain a negative COVID-19 test at least once a week. However, OSHA withdrew the ETS on January 26, 2022 as an enforceable emergency temporary standard following the Supreme Court’s granting of a stay of its enforcement. OSHA explicitly did not withdraw the ETS as a proposed rule, such that it is possible that a permanent rule regarding COVID-19 vaccination and testing requirements will ultimately be issued by OSHA following a formal rulemaking process. President Biden also issued an Executive Order requiring certain COVID-19 precautions for government contractors and their subcontractors, including mandatory employee vaccination (subject to medical and religious exemptions). These requirements for federal contractors have been the subject of multiple lawsuits and enforcement has been enjoined nationwide, with appeals from those decisions pending in multiple federal appellate courts. It is not currently possible to predict the impact on the Company of a permanent OSHA rule, or the requirements for government contractors and their subcontractors, to the extent that such OSHA rule and requirements for federal contractors are ultimately implemented and enforced. Further, state and local governments in the United States and in international jurisdictions where we operate may implement vaccine mandates and it is not clear if such mandates will go into effect, or stay in effect; whether any will apply to all employees or only to employees who work in the office; and how compliance will be documented. Should such mandates apply to us, we may be required to implement a requirement that all of our employees get vaccinated, subject to limited exceptions. Any requirement to mandate COVID-19 vaccination of our workforce or require our unvaccinated employees to be tested weekly could result in employee attrition and difficulty securing future labor needs. In addition, any requirement to impose obligations on our suppliers under the Executive Order covering government contractors and their subcontractors could impact the price and availability of our supply of raw materials and our results of operations and financial condition could be adversely affected.

In addition, many of our suppliers are experiencing operational challenges as a result of COVID-19, which has affected our supply chain and could have an adverse effect on our ability to provide products to our customers. Our suppliers may have to temporarily close a facility for disinfecting after employees tested positive for COVID-19, face staffing shortages from employees who are sick or apprehensive about coming to work or be overwhelmed by unexpected demand. Because of measures we took to increase inventory, the difficulties experienced by our suppliers have had minimal impact on our ability to ship products to our customers; however, these measures had a negative impact on short-term profitability and if the COVID-19 pandemic continues, it may negatively affect our inventory and delay delivery to our customers, which in turn will adversely affect our revenue and results of operations. If our suppliers are unable to deliver the materials we require on a timely basis, we cannot guarantee that we will be able to locate alternative sources of supply for our products on acceptable terms, or at all. If we are unable to adequately purchase appropriate amounts of inventory, our business and results of operations may be materially and adversely affected.

Additionally, the COVID-19 pandemic has impacted, and may continue to impact, our headquarters, which is our primary corporate office, sales and marketing center and has also impacted our in-house manufacturing location, including through the effects of facility closures, reductions in operating hours and other social distancing efforts. For example, if even a small number of our employees who work in clusters relating to critical functions such as manufacturing, procurement, supply chain, and research and development, test positive for COVID-19, the entire business function could be temporarily shut down to ensure the safety of our employees and the effectiveness of business would be severely impacted. Additionally, while Massachusetts and other states have begun to ease restrictions on in-person operations, we cannot predict whether these conditions and concerns will continue or whether we will experience more significant or frequent disruptions in the future, including the complete closure of one or more of our facilities. It is possible that widespread remote work arrangements may have a negative impact on our operations, the execution of our business plans, the productivity and availability of key personnel and other employees necessary to conduct our business, and on third party service providers who perform critical services for us, or otherwise cause operational failures due to changes in our normal business practices necessitated by the outbreak and related governmental actions. If a natural disaster, power outage, connectivity issue or other event occurred that impacted our employees’ ability to work remotely, it may be difficult or, in certain cases, impossible, for us to continue our business for a substantial period of time. The increase in remote working may also result in

12

increased consumer privacy, data security and fraud risks, and our understanding of applicable legal and regulatory requirements, as well as the latest guidance from regulatory authorities in connection with the COVID-19 pandemic, may be subject to legal or regulatory challenge, particularly as regulatory guidance evolves in response to future developments.

More generally, the COVID-19 pandemic has had, and is expected to continue to have, an adverse effect on economies and financial markets globally, leading to a continued economic downturn, which is expected to decrease technology spending generally and could adversely affect demand for our platforms and services. It is not possible at this time to estimate the full impact that COVID-19 will have on our business, as the impact will depend on future developments, which are highly uncertain and cannot be predicted.

To the extent the COVID-19 pandemic adversely affects our business, financial condition and results of operations, it may also have the effect of heightening many of the other risks described in this “Risk Factors” section, including but not limited to, those related to our ability to increase sales to existing and new customers, increases to costs and potential delays from reliance on global suppliers and distribution networks, continue to perform on existing contracts, develop and deploy new technologies, and expand our marketing capabilities and sales organization.

Risks Related to the Additive Manufacturing Industry

The additive manufacturing industry in which we operate is characterized by rapid technological change, requiring continual innovation and development of new products and innovations to meet constantly evolving customer demands.

Our revenues are derived from the sale of 3D printers and related materials and services. The additive manufacturing market is subject to rapid innovation and technological change and our customers’ needs are rapidly evolving. While we intend to invest substantial resources to remain on the forefront of technological development, continuing advances in additive manufacturing technology, changes in customer requirements and preferences and the emergence of new standards, regulations and certifications could adversely affect adoption of our products. Our ability to compete in the additive manufacturing market depends, in large part, on our success in developing and introducing new 3D printers and technology, in improving our existing products and technology and qualifying new materials which our systems can support. We believe that we must continuously enhance and expand the functionality and features of our products and technologies in order to remain competitive. However, we may not be able to:

Even if we successfully introduce new additive manufacturing products and technologies and enhance our existing products and technologies, it is possible that these will eventually supplant our existing products or that our competitors will develop new products and technologies that will replace our own. As a result, any of our products may be rendered obsolete or uneconomical by our or our competitors’ technological advances, leading to a loss in market share, decline in revenue and adverse effects to our business and prospects.

We face intense and growing competition in the additive manufacturing industry. Our inability to compete effectively with our competitors could affect our ability to achieve our anticipated market penetration and achieve or sustain profitability.

The additive manufacturing industry in which we operate is highly competitive. We compete for customers with a wide variety of producers of additive manufacturing equipment that creates 3D objects and end-use parts, as well as with providers of materials and services for this equipment. Some of our existing and potential competitors are researching, designing, developing and marketing other types of products and services that may render our existing or future products obsolete, uneconomical or less competitive. Existing and potential competitors may also have substantially greater financial, technical, marketing and sales, manufacturing, distribution and other resources than us, including name recognition, as well as experience and expertise in intellectual property rights and operating within certain international markets or industry verticals, any of which may enable them to compete effectively against us. Moreover, many of our competitors have more extensive customer and partner relationships than we do, and may therefore be in a

13

better position to identify and respond to market developments or changes in customer demands, including successfully developing technologies that outperform our technologies. Potential customers may also prefer to purchase from their existing suppliers rather than a new supplier regardless of product performance or features. For example, a number of companies that have substantial resources have announced that they are beginning production of 3D printers, which will further enhance the competition we face.

In addition, independent suppliers offer non-original supplies (including imitation, refill and remanufactured alternatives), which are often available for lower prices but which can also offer lower print quality and reliability compared to our supplies. If our customers utilize these non-original supplies with our printers, it could adversely impact our operating results and may have
a negative impact on our brand.

Future competition may arise from the development of allied or related techniques for equipment, materials, software and services that are not encompassed by our patents, from the issuance of patents to other companies that may inhibit our ability to develop certain products and from improvements to existing technologies.

We intend to continue to follow a strategy of continuing product development, VAR and distribution network expansion to enhance our competitive position to the extent practicable. But we cannot assure you that we will be able to maintain our current position or continue to compete successfully against current and future sources of competition. If we do not keep pace with technological change and introduce new products and technologies, demand for our products may decline, and our operating results may suffer.

Declines in the prices of our products and services, or in our volume of sales, together with our relatively inflexible cost structure, may adversely affect our financial results.

Our business is subject to price competition. Such price competition may adversely affect our results of operation, especially during periods of decreased demand. Decreased demand also adversely impacts the volume of our sales. If our business is not able to offset price reductions resulting from these pressures, or decreased volume of sales due to contractions in the market, by improved operating efficiencies and reduced expenditures, then our operating results will be adversely affected.

Although we generally do not have long-term supply agreements, certain of our operating costs are fixed and cannot readily be reduced, which has an impact on our operating results. To the extent the demand for our products slows, or the additive manufacturing market contracts, we may be faced with excess manufacturing capacity and related costs that cannot readily be reduced, which will adversely impact our financial condition and results of operations. Conversely, because we generally do not have long-term supply agreements, we are subject to the risk of significant cost increases and parts shortages by our suppliers, or decisions by our suppliers to cease selling certain parts and materials to us.

Increased consolidation among our customers, suppliers and competitors in the additive manufacturing industry may have an adverse effect on our business and results of operations.

Increased consolidation in the additive manufacturing industry among our customers, suppliers and competitors may adversely affect our business and results of operations. Customer consolidation could lead to changes in buying patterns, slowdowns in spending, and impact our distribution channels. Moreover, the significant purchasing power of these large companies can increase pricing and competitive pressures for us, including the potential for decreases in our average selling prices. If one of our customers is acquired by another company that does not rely on us to provide it with products or relies on another provider of similar products, we may lose that customer’s business. Any of the foregoing results will adversely affect our business, financial condition and results of operations.

In addition, supplier consolidation may lead to increased prices of materials for our products, deployment delays and/or a disruption in output. In addition, such consolidation may exacerbate the risks relating to our dependence on a small number of suppliers for certain materials that are required to manufacture our products.

We may experience significant delays in the design, production and launch of our additive manufacturing solutions and enhancements to existing products, and we may be unable to successfully commercialize products on our planned timelines.

We have several additive manufacturing solutions and enhancements to existing products that are still under development. There are often delays in the design, testing, manufacture and commercial release of new products, and any delay in the launch of our products could materially damage our brand, business, growth prospects, financial condition and operating results. Even if we

14

successfully complete the design, testing and manufacture for one or all of our products or enhancements under development, we may fail to develop a commercially successful product on the timeline we expect for a number of reasons, including:

Our success in the market for the new products we develop will depend in part on our ability to prove our new products’ capabilities in a timely manner. Until demonstration, our customers may not believe that our products and/or technology have the capabilities they were designed to have or that we believe they have. Furthermore, even if we do successfully demonstrate our products’ capabilities, potential customers may be more comfortable doing business with a competitor, including another larger and more established company, may take longer than expected to make the decision to order our products, or may not have the budget or decision-making authority to purchase the product. Significant revenue from new product investments may not be achieved for a number of years, if at all. If the timing of our launch of new products and/or of our customers’ acceptance of such products is different than our assumptions, our revenue and results of operations may be adversely affected.

Changes in our product mix may impact our gross margins and financial performance.

Our financial performance may be affected by the mix of products and services we sell during a given period. We expect to continue to offer products at a variety of price points. Sales of certain of our products have, or are expected to have, higher gross margin contributions than others. If our product mix shifts too far into lower gross margin products, or we are unable to maintain or increase gross margins, and we are not able to sufficiently reduce the engineering, production and other costs associated with those products or substantially increase the sales of our higher gross margin products, our profitability could be reduced. Additionally, the introduction of new products or services may further heighten quarterly fluctuations in gross profit and gross profit margins due to manufacturing ramp-up and start-up costs. Relatedly, if our product mix shifts such that our production rates decrease, our product costs and margins may be negatively impacted. We may experience significant quarterly fluctuations in gross profit margins or operating income or loss due to the impact of the mix of products, channels or geographic areas in which we sell our products from period to period.

Risks Related to Our Business Operations

Our failure to meet our customers’ price expectations would adversely affect our business and results of operations.

Demand for our product lines is sensitive to price. We believe our competitive pricing has been an important factor in our results to date. Therefore, changes in our pricing strategies can have a significant impact on our business and ability to generate revenue. Many factors, including our production and personnel costs, our competitors’ pricing and marketing strategies, our customers’ budgets, the value our products bring to our customers and our desire to hit revenue goals can significantly impact our pricing strategies. If we fail to meet our customers’ price expectations in any given period, demand for our products and product lines could be negatively impacted and our business, results of operations and brand could suffer.

Our revenue model is evolving and we may introduce new revenue models or avenues that may not be accepted by our customers and as such will not materialize.

15

We depend on our network of VARs and other distribution partners and if we fail to maintain successful relationships, or if they fail to perform, our ability to market, sell and distribute our products will be limited, and our business, financial position and results of operations will be harmed.

We rely heavily on our global network of VARs and other distribution partners to sell our products and to provide installation and support services to customers in their respective geographic regions. These VARs and other distribution partners may not be as effective in selling our products or installing and supporting our customers as we expect. Moreover, a VAR or other distribution partner may misrepresent the capabilities of our products without our knowledge either intentionally or unintentionally due to the inherent complexity of our products. Further, our VARs and other distribution partners can terminate their contracts with us at any time, and if our contracts with a significant number of VARs and other distribution partners, or with the most effective VARs and other distribution partners, were to terminate or if they would otherwise fail or refuse to sell certain of our products, we may not be able to find replacements that are as qualified or as successful in a timely manner, if at all.

Recruiting and retaining qualified VARs and other distribution partners and training them in our technologies requires significant time and resources. These VARs and other distribution partners may also market, sell and support other technologies in unrelated markets and may devote more resources to the marketing, sales and support of such products.

In addition, if our VARs and other distribution partners do not perform as anticipated, or if we are unable to secure qualified and successful VARs and other distribution partners, our sales will suffer, which would have an adverse effect on our revenues and operating results. Because we also depend upon our VARs and other distribution partners to provide installation and support services for products, if our VAR or distribution partner relationships were terminated or limited to certain products, we may face disruption in providing support for our customers, which would adversely affect our brand, reputation and our results of operations. Any failure to offer high-quality technical support services may adversely affect our relationships with our customers and adversely affect our financial results and brand.

Further, we require that our VARs and other distribution partners adhere to all local laws and regulations, but it is possible that a VAR or other distribution partner could violate such laws or regulations, which could adversely impact our business, reputation and financial results and brand. Our indirect sales and distribution model could subject us to lawsuits, potential liability and brand and reputational harm if, for example, any of our VARs and other distribution partners misrepresent the functionality of our products or services to customers or violate laws or our corporate policies.

Additionally, a default by one or more VARs or other distribution partners with whom we have a significant receivables balance could have an adverse financial impact on our financial results. As of December 31, 2021, one VAR had a 10% trade receivables balance. There were not any VARs that made up 10% or more of revenue for the year ended December 31, 2021. In the event that this VAR or any of our large customers do not continue to purchase our products or purchase fewer of our products, our business, results of operations and financial condition could be adversely affected. We have reviewed our policies that govern credit and collections and will continue to monitor them in light of current payment status and economic conditions. In addition, we try to reduce the credit exposures of our accounts receivable by instituting credit limits and additional checks. However, there can be no assurance that our efforts to identify potential credit risks will be successful. Our inability to timely identify VARs and other distribution partners that are credit risks could result in defaults at a time when such VARs and other distribution partners have high accounts receivable balances with us. Any such default would result in a significant charge against our earnings and adversely affect our results of operations and financial condition. Furthermore, accounts receivable payment periods were approximately 87 days for the year ended December 31, 2021. During that time, the VAR or distribution partner may default on its obligations or we may otherwise be unable to collect the payments due to us, which could adversely affect our results of operations and financial condition.

If our suppliers become unavailable or inadequate, our customer relationships, results of operations and financial condition may be adversely affected.

As a result of supply chain disruptions and the rise of inflation, we have experienced increasing costs and supply shortages that intensified during the second half of 2021, and which are continuing into 2022. We acquire certain of our materials, which are critical to the ongoing operation and future growth of our business, from several third parties. Generally, our third-party contract manufacturers contract directly with component suppliers with our guidance. We rely on our contract manufacturers to manage their supply chains. If one of our contract manufacturers has supply chain disruptions, or our relationship with our contract manufacturer terminates, we could experience delays. We also source some materials directly from suppliers. While most manufacturing equipment and materials for our products are available from multiple suppliers, certain of those items are only available from limited sources. Should any of these suppliers become unavailable or inadequate, or impose terms unacceptable to us, such as increased pricing terms, we could be required to spend a significant amount of time and expense to develop alternate sources of supply, and we may not be successful in doing so on terms acceptable to us, or at all. As a result, the loss of a limited source supplier could adversely affect our brand and relationship with our customers as well as our results of operations and financial condition.

16

In the case of certain materials, we have specified a certain grade of a product to be used in our manufacturing process. While there are several potential suppliers of most of these component materials that we use, we currently choose to use only one or a limited number of suppliers for several of these components and materials. For those materials, we could be impacted by any changes our suppliers make to such materials, which could include specification changes, lead time or cancellation of the material. If there is not an alternate product available, replacement thereof would require significant engineering and manufacturing efforts by us to qualify a replacement. Additionally, if a supplier of such materials decided to terminate their relationship with us, we may face delays in our production as we seek out a replacement supplier. Our reliance on a single or limited number of vendors involves a number of risks, including:

In addition, we evaluate new suppliers pursuant to our internal procedures. This process involves evaluations of varying durations, which may cause production delays if we were required to qualify a new supplier unexpectedly. We generally assemble our systems and parts based on our internal forecasts and the availability of raw materials, assemblies, components and finished goods that are supplied to us by third parties, which are subject to various lead times. If certain suppliers were to decide to discontinue production of an assembly, component or raw material that we use, the unanticipated change in the availability of supplies, or unanticipated supply limitations, could cause delays in, or loss of, sales, increased production or related costs and consequently reduced margins, and damage to our reputation. If we were unable to find a suitable supplier for a particular component, material or compound, we could be required to modify our existing products or the end-parts that we offer to accommodate substitute components, material or compounds. While we monitor risk internally related to our sourcing (particularly concerning raw materials), there is no guarantee that will sufficiently protect us if we suddenly lose access to supplies unexpectedly.

Any shortage of a particular component, material or compound could materially and adversely affect our ability to manufacture our products and could lead to increased costs to acquire such resources which could adversely affect our business and financial condition. We have in the past experienced and may in the future experience materials shortages and price fluctuations of certain key components, materials and compounds, and the predictability of the availability and pricing of these components, materials and compounds may be limited. Shortages of components, materials or compounds or pricing fluctuations could be material in the future. In the event of a components, materials or compounds shortage, supply interruption or material pricing change from suppliers of these components, materials or compounds, we may not be able to develop alternate sources in a timely manner or at all in the case of sole or limited sources. Developing alternate sources of supply for these components, materials or compounds may be time-consuming, difficult, and costly and we may not be able to source these components, materials or compounds on terms that are acceptable to us, or at all, which may undermine our ability to meet our requirements or to fill customer orders in a timely manner. Any interruption or delay in the supply of any of these components, materials or compounds, or the inability to obtain these components, materials or compounds from alternate sources at acceptable prices and within a reasonable amount of time, would adversely affect our ability to meet our scheduled product deliveries to our customers. This could adversely affect our relationships with our customers and VARs and could cause delays in shipment of our products and adversely affect our operating results. In addition, increased component, material or compound costs could result in lower gross margins. Even where we are able to pass increased costs along to our customers, there may be a lapse of time before we are able to do so such that we must absorb the increased cost. If we are unable to buy these components, materials or compounds in quantities sufficient to meet our requirements on a timely basis, we will not be able to deliver products to our customers, which may result in such customers using competitive products instead of ours.

The recent events precipitated by the COVID-19 pandemic have created minor delays on the inbound supply chain at our partners and our own facilities. Additional delays on both inbound and outbound logistics have also created challenges. We have been able to identify alternative solutions such that none of the issues has had a material impact on our ability to fulfill demand. If disruptions to global businesses from the pandemic continue or worsen, our business could face greater supply chain delays and difficulty shipping or receiving products and materials, which could have a material adverse effect on our financial condition and results of operations.

While we believe that, if necessary, we can obtain all the components necessary for our spare parts and materials from other manufacturers, we will need to guide any new manufacturers through evaluation processes of varying durations. Our spare parts and raw materials used in our materials production are subject to various lead times. Any unanticipated change in the sources of our supplies, or unanticipated supply limitations, could increase production or related costs and consequently reduce margins.

17

If our forecasts exceed actual orders, we may hold inventories of slow-moving or unusable parts, which could have an adverse effect on our cash flow, profitability, and results of operations. Inversely, we may lose orders if our forecast is low and we are unable to meet demand. There is considerable uncertainty on the business impact from current measures and potential future measures to contain the spread of the COVID-19 pandemic on our vendors, suppliers, and partners, especially if such measures are in effect for an extended period of time.

Our business model is predicated, in part, on developing or expanding recurring revenues through the sale of our hardware, consumables, and services. If that recurring stream of revenues does not develop as expected, or if our business model changes as the industry evolves, our operating results may be adversely affected.

Our business model is dependent, in part, on our ability to develop, maintain and increase sales of our hardware, consumables, and services as they generate recurring revenues. Existing and future customers of our systems may not purchase our consumables and services at the same rate at which customers currently purchase those offerings. If our current and future customers purchase a lower volume of our consumables and services, resulting overall in lower purchases of consumables and services on average than with our current installed customer base, our recurring revenue stream relative to our total revenues would be reduced and our operating results would be adversely affected.

We rely on a limited number of third-party logistics providers for distribution of our products, and their failure to distribute our products effectively would adversely affect our sales.

We rely on a limited number of third-party logistics providers for shipping our products. Each third-party logistics provider stores our products in a limited number of warehouses where they prepare and ship our products based on digital instructions. The use of a limited number of third-party logistics providers increases the risk that a fire or damage from another type of disaster at any of the warehouses may result in a disruption of our commercialization efforts. Additionally, because we use a limited number of third-party logistics providers, if there is a disruption in the distribution channels of such third-party logistics providers, including but not limited to any disruption caused by global shipping capacity, labor shortages and the ongoing COVID-19 pandemic, our business and financial condition could be adversely impacted.

If our third-party logistics providers do not fulfill their contractual obligations to us, or refuse or fail to adequately distribute our products, such as by shipping our products to the incorrect recipient, or the agreements are terminated without adequate notice, shipments of our products, and associated revenues, would be adversely affected. In addition, we expect that it may take a significant amount of time if we were required to change our third-party logistics providers and would require significant efforts to provide the systems support required for a new provider to effectively support our operations.

If demand for our products does not grow as expected, or if market adoption of additive manufacturing does not continue to develop, or develops more slowly than expected, our revenues may stagnate or decline, and our business may be adversely affected.

We believe that the industrial manufacturing market, which today is dominated by conventional manufacturing processes that do not involve additive manufacturing technology, is undergoing a shift towards additive manufacturing. We may not be able to develop effective strategies to raise awareness among potential customers of the benefits of additive manufacturing technologies or our products may not address the specific needs or provide the level of functionality required by potential customers to encourage the continuation of this shift towards additive manufacturing. We must anticipate, sometimes several years in advance, the direction that the additive market is taking. We may not correctly anticipate the direction, which may lead us to invest in the wrong products, which may adversely affect our results of operation and financial condition. If additive manufacturing technology does not continue to gain broader market acceptance as an alternative to conventional manufacturing processes, or if the marketplace adopts additive manufacturing technologies that differ from our technologies, we may not be able to increase or sustain the level of sales of our products, and our operating results would be adversely affected as a result.

Defects in new products or in enhancements to our existing products that give rise to product returns or warranty or other claims could result in material expenses, diversion of management time and attention and damage to our reputation.

Our additive manufacturing solutions are complex and may contain undetected defects or errors when first introduced or as enhancements are released that, despite testing, are not discovered until after a machine has been used. We may not know which products are affected by defects. These defects could be systemic and could affect all of the products we shipped prior to discovery thereof. It may not be economically feasible to identify, replace or repair all affected products. In the event that the defect is severe enough or impacts customer safety, a product recall may be required. This could result in delayed market acceptance of those products or claims from VARs, customers or others, which may result in litigation, increased customer warranty, support and repair or replacement costs, damage to our reputation and business, or significant costs and diversion of support, management and engineering personnel to correct the defect or error. We may from time to time become subject to warranty or product liability claims related to

18

product quality issues that may require us to take remedial action and could, regardless of merit, lead us to incur significant expenses, result in diversion of management time and attention, damage to our business and reputation and brand, and cause us to fail to retain existing customers or fail to attract new customers.

We attempt to include provisions in our agreements with customers that are designed to manage our exposure to potential liability for damages arising from defects or errors in our products. However, it is possible that these provisions may not be effective as a result of unfavorable judicial decisions or laws enacted in the future.

We may be unable to consistently manufacture our products to the necessary specifications or in quantities necessary to meet demand at an acceptable cost or at an acceptable performance level.

Our products are integrated solutions with many different components that work together. As such, a quality defect in a single component can compromise the performance of the entire solution. As we continue to grow and introduce new products, and as our products incorporate increasingly sophisticated technology, such as our FX20 system, which is the largest and most complex printer we have ever developed, it will be increasingly difficult to ensure our products are produced in the necessary quantities without sacrificing quality. There is no assurance that we or our third-party manufacturers and any component suppliers will be able to continue to manufacture our products so that they consistently achieve the product specifications and quality that our customers expect. Relatedly, certain of our components are sourced by a single supplier and, if the supply becomes disrupted as a result of insufficient quality, service delays or any other factor, our manufacturing efforts may be adversely affected. Any future design issues, unforeseen manufacturing problems, such as contamination of our or such third-party facilities, equipment malfunctions, aging components, component obsolescence, business continuity issues, quality issues with components and materials sourced from third party suppliers, or failures to strictly follow procedures or meet specifications, may have a material adverse effect on our brand, business, financial condition and operating results. Furthermore, we or our third-party manufacturers may not be able to increase manufacturing to meet anticipated demand or may experience downtime.

In order to meet our customers’ needs, we attempt to forecast demand for our products and components used for the manufacture of our products. If we fail to accurately forecast this demand, we could incur additional costs or experience manufacturing delays and may experience lost sales or significant inventory carrying costs.

The risk of manufacturing defects or quality control issues is generally higher for new products, whether produced by us or a third-party manufacturer, products that are transitioned from one manufacturer to another, particularly if manufacturing is transitioned or initiated with a manufacturer we have not worked with in the past, and products that are transferred from one manufacturing facility to another. We cannot assure investors that we and our third-party manufacturers will be able to launch new products on time, transition manufacturing of existing products to new manufacturers, transition our manufacturing capabilities to a new location or transition manufacturing of any additional materials in-house without manufacturing defects. An inability to manufacture products and components that consistently meet specifications, in necessary quantities and at commercially acceptable costs will have a negative impact and may have a material adverse effect on our brand, business, financial condition and results of operations.

Our commercial contracts generally contain product warranties and limitations on liability and we carry liability insurance in amounts that we believe are adequate for our risk exposure and commensurate with industry norms. However, commercial terms and our insurance coverage may not be adequate or available to protect our company in all circumstances, and we might not be able to maintain adequate insurance coverage for our business in the future at an acceptable cost. Any liability claim against us that is not covered by adequate insurance could adversely affect our consolidated results of operations and financial condition. Finally, any liability claim against us may cause harm to our brand, reputation and adversely impact our business.

We are dependent on the continued services and performance of our senior management and other key employees, as well as on our ability to successfully hire, train, manage and retain qualified personnel.

Our future performance depends on the continued services and contributions of our executive team and other key employees to execute on our business plan and to identify and pursue new opportunities and product innovations. Such persons may resign at any time and the loss of their services could delay or prevent the successful implementation of our strategy, commercialization of new applications for our systems or other products, or could otherwise adversely affect our ability to manage our company effectively and carry out our business plan. There is no assurance that if any senior executive or other key employee leaves in the future, we will be able to rapidly replace him or her and transition smoothly towards his or her successor, without any adverse impact on our operations.

Our ability to successfully pursue our growth strategy will also depend on our ability to attract, motivate and retain existing and new personnel. We experience intense competition for qualified senior management and other key personnel (including scientific, technical, manufacturing, engineering, financial and sales personnel) in the additive manufacturing industry, especially in the greater Boston area. In addition, we have experienced increased competition and shortages for skilled labor, particularly for the key roles

19

noted above. Our personnel are generally employed on an at-will basis, which means that they could terminate their employment with us at any time. There can be no assurance that we will be able to retain our current key personnel or attract new persons to join our organization in the future. Some of our competitors for these employees have greater resources and more experience, making it difficult for us to compete successfully for key personnel. These pressures could result in increased costs in order to provide competitive compensation packages to attract and retain key personnel. Moreover, new employees may not be as productive as we expect since we may face challenges in adequately integrating them into our workforce and culture. If we cannot attract and retain sufficiently qualified technical employees for our research product development activities, as well as experienced sales and marketing personnel, we may be unable to develop and commercialize new products and enhancements to existing products.

As manufacturing becomes a larger part of our operations, we will become exposed to accompanying risks and liabilities.

In-house and outsourced manufacturing has been and continues to be a significant part of our business. As a result, we expect to continue to be subject to various risks associated with the manufacturing and supply of products, including the following:

Any failure to adequately manage risks associated with the manufacture and supply of materials and products could adversely affect profits from that segment of our business and/or lead to significant liabilities, which would harm our brand, business, operations and financial condition.

Under applicable employment laws, we may not be able to enforce covenants not to compete and therefore may be unable to prevent our competitors from benefiting from the expertise of some of our former employees.

We generally enter into non-competition agreements with our employees. These agreements prohibit our employees from competing directly with us or working for our competitors or clients for a limited period after they cease working for us. We may be unable to enforce these agreements under the laws of the jurisdictions in which our employees work and it may be difficult for us to restrict our competitors from benefiting from the expertise that our former employees or consultants developed while working for us. For example, in Massachusetts, where most of our employees are based, applicable law imposes a number of requirements to enter into a valid non-competition agreement, and in California non-competition agreements with employees are generally unenforceable after termination of employment.

20

We expect to continue to experience rapid growth and organizational change. If we fail to manage our growth effectively, we may be unable to execute our business plan, maintain high levels of service and customer satisfaction or attract new employees and customers.

We expect to continue to experience growth in our number of customers, sales, revenues and headcount. We expect to continue to make significant investments in our business, including investments in our infrastructure, software, technology, personnel headcount, facilities, marketing and sales efforts. If our business does not generate the level of revenue required to support our investment, our net sales and profitability will be adversely affected.

To manage growth in our operations and personnel, we will need to continue to scale and improve our operational, financial, and management controls, and our reporting systems and procedures, which will require significant capital expenditures, increasing our cost of operations and the reallocation of valuable management resources. As we scale, it may become more difficult and will require additional capital expenditures to maintain and increase the productivity of our employees, expand production, to address the needs of our actual and prospective customers, to further develop and enhance our products, and remain competitive against our competitors’ products. These enhancements and improvements will require significant capital expenditures, investments in additional headcount and other operating expenditures and allocation of valuable management and employee resources. Our future financial performance and our ability to execute on our business plan will depend, in part, on our ability to effectively manage any future growth and expansion. There are no guarantees we will be able to do so in an efficient or timely manner, or at all.

As we acquire and invest in companies or technologies, we may not realize expected business, technological or financial benefits and the acquisitions or investments could prove difficult to integrate, disrupt our business, dilute stockholder value and adversely affect our business, results of operations, and financial condition.

As part of our business strategy, we may evaluate and make investments in, or acquisitions of, complementary companies, products, software and technologies, to further grow and augment our business and product offerings. The success of any attempts to grow our business through acquisitions to complement our business depends in part on the availability of, our ability to identify, and our ability to engage and pursue suitable acquisition candidates. We may not be able to find suitable acquisition candidates, and we may not be able to complete acquisitions on favorable terms, if at all.

If we do complete future acquisitions, we cannot assure you that they will ultimately strengthen our competitive position or that they will be viewed positively by customers, financial markets or investors. Furthermore, future acquisitions could pose numerous additional risks to our operations, including:

21

Each of the above challenges are exacerbated by the COVID-19 pandemic, which complicates our ability to complete and integrate any future acquisition into our business and could adversely affect the acquired business in unexpected ways.

We may require additional capital to support business growth, and this capital might not be available on acceptable terms, if at all.

We intend to continue to make investments to support our business growth and may require additional funds to respond to business challenges and opportunities, including the need to develop new features or enhance our products, improve our operating infrastructure or acquire complementary businesses and technologies. Accordingly, we may need to engage in equity or debt financings to secure additional funds if our existing sources of cash and any funds generated from operations do not provide us with sufficient capital. If we raise additional funds through future issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences and privileges superior to those of holders of our common stock. Any debt financing that we may secure in the future could involve restrictive covenants relating to our capital raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities, including potential acquisitions. We may not be able to obtain additional financing on terms favorable to us, if at all. If we are unable to obtain adequate financing or financing on terms satisfactory to us when we require it, our ability to continue to support our business growth and to respond to business challenges and opportunities could be significantly impaired, and our business may be adversely affected.

Risks Related to Third Parties

A real or perceived defect, security vulnerability, error or performance failure in our software or technical problems or disruptions caused by our third-party service providers could cause us to lose revenue, damage our reputation and expose us to liability.

Our hardware products rely upon our complementary software products which are inherently complex and, despite extensive testing and quality control, have in the past and may in the future contain defects or errors, especially when first introduced, or otherwise not perform as contemplated. As the use of our products, including products that were recently acquired or developed, expands to more sensitive, secure or mission critical uses by our customers, we may be subject to increased scrutiny, potential reputational risk or potential liability should our software fail to perform as contemplated in such deployments. We have in the past and may in the future need to issue corrective releases of our software to fix these defects, errors or performance failures and we may encounter technical problems when we attempt to perform routine maintenance or enhance our software, internal applications, and systems, which could require us to allocate significant research and development and customer support resources to address these problems and divert the focus of our management and research and development teams. In addition, our platform may be negatively impacted by technical issues experienced by our third-party service providers.

Our business, brands, reputation and ability to attract and retain customers depend upon the satisfactory performance, reliability and availability of our software products, which in turn, with respect to our planned software as a service (“SaaS”) offerings depend upon the availability of the internet and our third-party service providers. For example, for our SaaS offerings we outsource our cloud infrastructure to Amazon Web Services (“AWS”), our hosting provider, which hosts our software products. Our hosting provider runs its own platforms upon which our products depend, and we are, therefore, vulnerable to service interruptions at the hosting provider level. We do not control the operation of any of AWS’ data center hosting facilities, and they may be subject to damage or interruption from earthquakes, floods, fires, power loss, telecommunications failures, terrorist attacks and similar events. They may also be subject to interruptions due to system failures, computer viruses, software errors or subject to breaches of computer hardware and software security, break-ins, sabotage, intentional acts of vandalism and similar misconduct. And while we rely on service level agreements with our hosting provider, if they do not properly maintain their infrastructure or if they incur unplanned outages, our customers may experience performance issues or unexpected interruptions and we may not meet our service level agreement terms with our customers. We have experienced, and expect that in the future we may experience interruptions, delays and outages in service and

22

availability from time to time due to a variety of factors, including infrastructure changes, human or software errors, website hosting disruptions and capacity constraints.

Any inefficiencies, security vulnerabilities, errors, defects, technical problems or performance failures with our software, internal applications and systems could reduce the quality of our products or interfere with our customers’ (and their users’) use of our products, which could negatively impact our brand and reputation, reduce demand, lead to a loss of customers or revenue, adversely affect our results of operations and financial condition, increase our costs to resolve such issues and subject us to financial penalties and liabilities under our service level agreements. Any limitation of liability provisions that may be contained in our customer agreements may not be effective as a result of existing or future applicable law or unfavorable judicial decisions. The sale and support of our products entail the risk of liability claims, which could be substantial in light of the use of our products in enterprise-wide environments. In addition, our insurance against this liability may not be adequate to cover a potential claim.

We depend on a limited number of third-party contract manufacturers for a substantial portion of all of our manufacturing needs and any delay, disruption or quality control problems in their operations, including due to the COVID-19 pandemic, could cause harm to our operations, including loss of market share and damage to our brand.

We depend on third-party contract manufacturers for the production of our 3D printers and on third-party suppliers for the components and raw materials used in our products. While there are several potential manufacturers for most of these products, all of our products are manufactured, assembled, tested and generally packaged by a limited number of third-party manufacturers and several single source providers of certain supplies. In most cases, we rely on these manufacturers to procure components and, in some cases, subcontract engineering work. Our reliance on a limited number of contract manufacturers involves a number of risks, including:

If any of our third-party contract manufacturers experience a delay, disruption or quality control problems in their operations, including due to the COVID-19 pandemic and global supply chain disruptions, or if a primary third-party contract manufacturer does not renew its agreement with us, our operations could be significantly disrupted and our product shipments could be delayed. Qualifying a new manufacturer and commencing volume production is expensive and time consuming. Ensuring that a contract manufacturer is qualified to manufacture our products to our standards is time consuming. In addition, there is no assurance that a contract manufacturer can scale its production of our products at the volumes and in the quality that we require. If a contract manufacturer is unable to do these things, we may have to move production for the products to a new or existing third-party manufacturer, which would take significant effort and our brand, business, results of operations and financial condition could be materially adversely affected. Finally, if a contract manufacturer producing a highly specified product changes its materials or is unable to meet our production demands, it could lead to specification changes, increased lead time or cancellation of the product.

As we contemplate moving manufacturing into different jurisdictions, we may be subject to additional significant challenges in ensuring that quality, processes, and costs, among other issues, are consistent with our expectations.

In addition, because we use a limited number of third-party contract manufacturers, increases in the prices charged may have an adverse effect on our results of operations, as we may be unable to find a contract manufacturer who can supply us at a lower price. As a result, the loss of a limited source supplier could adversely affect our relationships with our customers and our results of operations and financial condition.

All of our products must satisfy safety and regulatory standards and some of our products must also receive government certifications. We rely on third-party providers to conduct the tests that support our applications for most regulatory approvals for our products. As part of the certification process, our third-party contract manufacturers are subject to audit and must receive approvals from third parties providing such certifications. Failure to meet these certifications by our third-party contract manufacturers could adversely impact our business. Moreover, if our third-party contract manufacturers fail to timely and accurately conduct the tests

23

supporting our applications for regulatory approvals, we may be unable to obtain the necessary domestic or foreign regulatory approvals or certifications to sell our products in certain jurisdictions. As a result, we would be unable to sell our products and our sales and profitability could be reduced, our relationships with our sales channel could be harmed and our reputation and brand would suffer.

Our manufacturing facility and those of our third-party contract manufacturers and suppliers, as well as our customers’ facilities and our third-party logistics providers, are vulnerable to disruption due to natural or other disasters, strikes and other events beyond our control.

A major earthquake, fire, tsunami, hurricane, cyclone or other disaster, such as a major flood, seasonal storms, nuclear event or terrorist attack affecting our facilities or the areas in which they are located, or affecting those of our customers or third-party manufacturers, suppliers or fulfillment centers, could significantly disrupt our or their operations and delay or prevent product shipment or installation during the time required to repair, rebuild or replace our or their damaged manufacturing facilities. These delays could be lengthy and costly. If any of our facilities, or those of our third-party contract manufacturers, suppliers, third-party logistics providers or customers are negatively impacted by such a disaster, production, shipment and installation of our additive manufacturing machines could be delayed, which can impact the period in which we recognize the revenue related to that additive manufacturing machine sale. Additionally, customers may delay purchases of our products until operations return to normal. Even if we are able to respond quickly to a disaster, the continued effects of the disaster could create uncertainty in our business operations. In addition, concerns about terrorism, the effects of a terrorist attack, political turmoil, labor strikes, war or the outbreak of epidemic or pandemic diseases (including the outbreak of the coronavirus disease COVID-19) could have a negative effect on our operations and sales.

Risks Related to International Operations

Our existing and planned global operations subject us to a variety of risks and uncertainties that could adversely affect our business and operating results. Our business is subject to risks associated with selling machines and other products in non-United States locations.

Our products and services are distributed across the world, and we derive a substantial percentage of our sales from these international markets. Accordingly, we face significant operational risks from doing business internationally.

Our operating results may be affected by volatility in currency exchange rates and our ability to effectively manage our currency transaction risks. Although we currently invoice customers in United States dollars, increases in the value of the dollar relative to foreign currencies may make our products less attractive to foreign customers. We may also incur currency transaction risks if we were to enter into either a purchase or a sale transaction using a different currency from the currency in which we report revenues. In such cases we may suffer an exchange loss because we do not currently engage in currency swaps or other currency hedging strategies to address this risk. As we realize our strategy to expand internationally, our exposure to currency risks may increase. Given the volatility of exchange rates, we can give no assurance that we will be able to effectively manage our currency transaction risks or that any volatility in currency exchange rates will not have an adverse effect on our results of operations.

The shipments of our products to foreign customers and/or end-users may be subject to tariffs and other restrictions imposed by the destination countries. As we procure equipment and materials from foreign suppliers, we may be required to pay import duties and comply with regulations imposed by the U.S. Customs and Border Protection. Both the U.S. and foreign tariff rates and import restrictions may change from time to time, which could adversely impact our global operations, for example, by decreasing the price competitiveness of our products in foreign markets and/or by increasing our manufacturing costs.

Other risks and uncertainties we face from our global operations include:

24

In addition, additive manufacturing has been identified by the U.S. government as an emerging technology and is currently being further evaluated for national security impacts. We expect additional regulatory changes to be implemented that will result in increased and/or new export controls related to additive manufacturing technologies, components and related materials and software. These changes, if implemented, may result in our being required to obtain additional approvals and/or licenses to sell 3D printers in the global market.

Our failure to effectively manage the risks and uncertainties associated with our global operations could limit the future growth of our business and adversely affect our business and operating results.

Global economic, political and social conditions and uncertainties in the markets that we serve may adversely impact our business.

Our performance depends on the financial health and strength of our customers, which in turn is dependent on the economic conditions of the markets in which we and our customers operate. Declines in the global economy, difficulties in the financial services sector and credit markets, continuing geopolitical uncertainties and other macroeconomic factors all affect the spending behavior of potential customers. Economic uncertainty in Europe, the United States, India, Japan, China and other countries may cause customers and potential customers to further delay or reduce technology purchases.

We also face risks from financial difficulties or other uncertainties experienced by our suppliers, distributors or other third parties on which we rely. If third parties are unable to supply us with required materials or components or otherwise assist us in operating our business, our business could be harmed.

Other changes in U.S. social, political, regulatory and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment could also adversely affect our business. In particular, on June 23, 2016, the U.K. held a referendum in which a majority of the eligible members of the electorate voted to leave the EU, commonly referred to as Brexit. Pursuant to Article 50 of the Treaty on EU, the U.K. ceased being a member state of the EU on January 31, 2020. The implementation period began February 1, 2020 and continued until December 31, 2020, during which the U.K. continued to follow all of the EU’s rules, and the U.K.’s trading relationship remained the same. The U.K. and the EU have signed an EU-UK Trade and Cooperation Agreement, or TCA, which became provisionally applicable on January 1, 2021 and then formally entered into force on May 1, 2021 after being ratified by both the U.K. and the EU. This agreement provides details on how some aspects of the U.K. and EU’s relationship will operate going forwards however there are still many uncertainties and how the TCA will take effect in practice is still largely unknown. Additionally, there is a risk that other countries may decide to leave the European Union. This uncertainty

25

surrounding this transition not only potentially affects our business in the United Kingdom and the European Union, but also may have an effect on global economic conditions and the stability of global financial markets, which in turn could have a material adverse effect on our business, financial condition and results of operations. In extreme cases, we could experience interruptions in production due to the processing of customs formalities or reduced customer spending in the wake of weaker economic performance. If global economic conditions remain volatile for a prolonged period or if European economies experience further disruptions, our results of operations could be adversely affected. In addition, the armed conflicts involving Russia and Ukraine may have direct and indirect effects on global economic conditions and the stability of global financial markets, which could also have a material adverse effect on our business, financial condition and results of operations.

The effects of regulations relating to conflict minerals may adversely affect our business.

On August 22, 2012, under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the SEC adopted requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements require companies to research, disclose and report whether or not such minerals originate from the Democratic Republic of Congo and adjoining countries. The implementation of these requirements could adversely affect the sourcing, availability and pricing of such minerals if they are found to be used in the manufacture of our products, including our 3D printers or materials. In addition, we expect to continue to incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.

Risks Related to Sales of Products to U.S. and Foreign Governments

A significant portion of our business depends on sales to the public sector, and our failure to receive and maintain government contracts or changes in the contracting or fiscal policies of the public sector could have a material adverse effect on our business.

We derive a significant portion of our revenue from contracts that we have, either directly or through distribution partners and VARs, with federal, state, local and foreign governments and government agencies, and we believe that the success and growth of our business will continue to depend on our successful procurement of government contracts. For example, we have historically derived, and expect to continue to derive, a significant portion of our revenue from sales to agencies of the U.S. federal government and governments of other nations, either directly by us or through other distribution partners. Sales to such governments and their agencies are subject to a number of challenges and risks. The procurement process for governments and their agencies is highly competitive, time-consuming, and may, in certain circumstances, be subject to political influence. We incur significant up-front time and expense, which subjects us to additional compliance risks and costs, without any assurance that we (or a third-party distributor or reseller) will win a contract.

Accordingly, our business, financial condition, results of operations, and prospects may be adversely affected by certain events or activities, including, but not limited to:

26

Any such event or activity, among others, could cause governments and governmental agencies to delay or refrain from purchasing our products and services in the future, reduce the size or payment amounts of purchases from existing or new government customers, or otherwise have an adverse effect on our business, results of operations, financial condition and prospects.

Government programs are limited by budgetary constraints and political considerations and are subject to uncertain future funding levels that could result in the termination of programs.

Government agency and department purchases are often strategic in nature and large in size. Therefore, reductions in funding levels that impact our customers could negatively affect the size of our customers’ orders or lead to cancellation of orders. Government contracts are often subject to more extensive scrutiny and publicity than commercial contracts. The number and terms of new government contracts signed can be affected significantly by political and economic factors, such as pending elections and revisions to government tax policies. Negative publicity related to our government contracts, regardless of its accuracy, may damage our business by affecting our ability to compete for new contracts. A decline in security-related government spending for any reason, or a shift away from programs that we address, could hurt our sales, put pressure on our prices and reduce our revenue and margins. Relatedly, the use of our products by militaries or other government agencies or departments in a way that is perceived negatively by the public could adversely affect our business and reputation.

A multi-year U.S. government program may be implemented through the award of many different individual contracts, grants, cooperative agreements and subcontracts or other subawards. For U.S. government programs, program funding is subject to congressional appropriations. Congress generally appropriates funds on a fiscal year basis even though a program may continue for several years. Government programs are often only partially funded initially, and additional funds are committed only as Congress makes further appropriations. The termination of a program or failure to commit funds to a program would result in a loss of anticipated future revenue attributable to that program, which could materially harm our business.

We are subject to audits by the U.S. government which could adversely affect our business.

U.S. government agencies routinely audit and investigate government contractors to monitor performance, cost allocations, cost accounting and compliance with applicable laws, regulations and standards. Since some of our contracts provide for cost reimbursement, the U.S. government has the right to audit our costs even after job completion and after we have billed and recognized the corresponding revenue. The U.S. government also may review the adequacy of, and a contractor’s compliance with, its internal control systems and policies, including the contractor’s purchasing, property, estimating, compensation and management information systems. Any costs found to be improperly allowed or improperly allocated to a specific contract will not be reimbursed, and any such costs that have already been reimbursed must be refunded, which would affect associated revenue that had already been recognized. While we intend to implement uniform procurement and compliance programs for all of our business, we may be subject to more risks from these audits until we are able to implement such a program effectively.

Responding to governmental audits, inquiries or investigations may involve significant expense and divert the attention of our management. If a government review or investigation uncovers improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, damages, fines and suspension or debarment from doing business with U.S. government agencies. In addition, our reputation could be seriously harmed by allegations of impropriety, even if unfounded. Our internal controls may not prevent or detect all improper or illegal activities.

Our business is subject to laws and regulations that are more restrictive because we are a contractor and subcontractor to the U.S. government.

As a contractor and subcontractor to the U.S. government, we are subject to various laws and regulations that are more restrictive than those applicable to non-government contractors, including the Federal Acquisition Regulations and its supplements, which comprehensively regulate the formation, administration and performance of U.S. government contracts, and the Truth in

27

Negotiations Act and various other laws, which require certain certifications and disclosures. These laws and regulations, among other things:

In addition, we may be subject to industrial security regulations of the U.S. Department of Defense and other federal agencies that are designed to safeguard against unauthorized access by foreigners and others to classified and other sensitive U.S. government information. If we were to come under foreign ownership, control or influence, our U.S. government customers could terminate, or decide not to renew, our contracts, or we may be subjected to burdensome industrial security compliance measures. Such a situation could impair our ability to obtain new contracts and subcontracts. The government may also change its procurement practices or adopt new contracting rules and regulations that could be costly to satisfy or that could impair our ability to obtain new contracts.

Our contracts and those of our VARs with governments may impose requirements that may be unfavorable to us and that may have a material adverse effect on our growth prospects and operating results.

Most of our sales to government entities have been made indirectly through our VARs and other distribution partners. In some cases, we have entered contracts directly with government customers. There are inherent risks in contracting with governments and their agencies. Government customers can typically terminate, reduce orders under or otherwise modify any of its contracts with us or our VARs for its convenience (i.e., without cause) whether or not we have failed to perform under the terms of the applicable contract. In such case, the government would not be required to pay our VARs or us for the lost profits for the unperformed work. A termination arising out of our VARs or our default could expose our VARs or us to liability and harm our VARs or our ability to compete for future contracts and orders. In addition to unfavorable termination provisions, our VARs or our U.S. government contracts and related regulations contain provisions that allow the U.S. government to unilaterally suspend our VARs or us from receiving new contracts pending resolution of alleged violations of procurement laws or regulations, reduce the value of existing contracts, issue modifications to a contract and potentially restrict exports of our products, services and associated materials.

Our VARs or our contracts with government agencies may subject our VARs or us to other risks and give the government additional rights and remedies not typically found in commercial contracts, including rights that allow the government to, for example:

These rights and remedies have the potential to limit our VARs or our sales to, and increase our VARs or our costs of, doing business with both government and commercial customers, which could materially adversely affect our growth prospects and operating results.

28

Additionally, we sometimes rely on our VARs and other distribution partners to satisfy certain regulatory obligations that we would otherwise have to satisfy if we sold directly to the government entities, and our VARs and other distribution partners may be unable or unwilling to satisfy these obligations in the future. In the event of such termination or change, it may be difficult for us to arrange for another VAR or other distribution partner to sell our solutions to these government entities in a timely manner, and we could lose sales opportunities during the transition.

Risks Related to Litigation and Liability

We are, and have been in the recent past, subject to business and intellectual property litigation.

We have been in the recent past involved in litigation, and we could be involved in additional litigation in the future. In March 2018, Desktop Metal, Inc. (“Desktop Metal”), a direct competitor in the additive manufacturing industry, brought a claim in Massachusetts federal court against us regarding patent infringement and trade secret misappropriation. We counterclaimed for trade secret misappropriation, breach of fiduciary duty, and other matters. A jury trial was held in July 2018 on Desktop Metal’s claims for patent infringement. We prevailed against Desktop Metal’s claims of patent infringement via a jury verdict that found no infringement of the asserted patents. A second jury trial began in September 2018 primarily in connection with our counterclaims, and the parties entered into a confidential settlement agreement (the “Settlement Agreement”) covering the disputes between them in October 2018. In October 2019, we submitted an Arbitration Demand with JAMS against Desktop Metal alleging breach of the parties’ Settlement Agreement pursuant to the non-disparagement obligations therein, as well as a violation of M.G.L. c. 93A. Desktop Metal counterclaimed against us for breach of the parties’ Settlement Agreement pursuant to the confidentiality provision therein. The matter proceeded in confidential arbitration and a hearing was held in December 2020. The Arbitration decision was issued on February 26, 2021, and the Arbitrator ruled that neither we nor Desktop Metal were liable pursuant to their respective claims, and that neither party therefore owed any damages to the other.

In July 2021, Continuous Composites Inc. (“Continuous Composites”), a company based out of Idaho, brought a claim in the United States District Court for the District of Delaware against us regarding patent infringement. We intend to mount a vigorous defense against Continuous Composites in court. However, we can provide no assurance as to the outcome of any such disputes, and any such actions may result in judgments against us for significant damages. Resolution of any such matters can be prolonged and costly, and the ultimate results or judgments are uncertain due to the inherent uncertainty in litigation and other proceedings.

In addition, the additive manufacturing industry has been, and may continue to be, litigious, particularly with respect to intellectual property claims. Moreover, our potential liabilities are subject to change over time due to new developments, changes in settlement strategy or the impact of evidentiary requirements. Regardless of the outcome, litigation has resulted in the past, and may result in the future, in significant legal expenses and require significant attention and resources of management. As a result, any present or future litigation that may be brought against us by any third party could result in reputational harm, losses, damages, and expenses that may have a significant adverse effect on our financial condition.

We could be subject to personal injury, property damage, product liability, warranty and other claims involving allegedly defective products that we supply.

The products we supply are sometimes used in potentially hazardous or critical applications, such as the assembled parts of an aircraft, medical device or automobile. The sale of our products and the provision of related services in general, and to customers in the foregoing industries in particular, exposes us to possible claims for property damage and personal injury or death, which may result from the use of these end-use parts.

While we have not experienced any such claims to date, actual or claimed defects in the products we supply could result in our being named as a defendant in lawsuits asserting potentially large claims. We may be potentially liable, in significant amounts, and face significant harm to our reputation if an aircraft, medical or automotive part, component or accessory or any other aviation, medical or automotive product that we have sold, produced or repaired fails due to our fault, in whole or in part, or if an aircraft or automobile for which we have provided services or in which their parts are installed crashes, and the cause can be linked to those parts or cannot be determined. A similar risk arises in connection with sales of our products to customers in the aerospace industry to the extent that the parts produced by those products do not function properly and are responsible for damages. Our commercial contracts generally contain product warranties and limitations on liability and we carry liability insurance in amounts that we believe are adequate for our risk exposure and commensurate with industry norms. While we intend to monitor our insurance coverage as our business continues to grow, claims may arise in the future, and that insurance coverage may not be adequate or available to protect our consolidated company in all circumstances. Additionally, we might not be able to maintain adequate insurance coverage for our business in the future at an acceptable cost. Any liability claim against us that is not covered by adequate insurance could adversely affect our consolidated results of operations and financial condition. Finally, any liability claim against us may cause harm to our brand, reputation and adversely impact our business.

29

We could face liability if our additive manufacturing solutions are used by our customers to print dangerous objects.

Customers may use our 3D printers to print parts that could be used in a harmful way or could otherwise be dangerous. For example, there have been news reports that additive manufacturing machines were used to print guns or other weapons. We have little, if any, control over what objects our customers print using our products, and it may be difficult, if not impossible, for us to monitor and prevent customers from printing weapons with our products. Additionally, individuals or entities unaffiliated with us could disseminate plans or digital files that could be used with our products to produce parts and items that could be deemed illegal or harmful. While we have never printed weapons on any printers in our offices, there can be no assurance that we will not be held liable if someone were injured or killed by a weapon printed by a customer using one of our products. Additionally, association of such an incident with our products may cause harm to our brand reputation and adversely impact our business.

Third parties may produce or sell counterfeit or imitation versions of our materials.

Third parties may sell counterfeit or imitation versions of our materials that are inferior or pose safety risks. If consumers confuse these counterfeit products or materials for our products or materials or have a bad experience with the counterfeit products or materials, they might refrain from purchasing our products or materials in the future, which could harm our reputation and sales. Further, if third parties develop materials that compete favorably on price, and/or meet or exceed the quality and performance of our own materials, we may lose recurring revenue from lost sales of our materials. If we do not maintain favorable perceptions of our products and materials, and if we are unable to compete successfully with third party manufacturers of materials, our brand, business, financial condition, results of operations and cash flows could be adversely impacted.

Failure of our global operations to comply with anti-corruption laws and various trade restrictions, such as sanctions and export controls, could have an adverse effect on our business.

We operate in a number of countries throughout the world, including countries known to have a reputation for corruption. Doing business on a global basis requires us to comply with anti-corruption laws and regulations imposed by governments around the world with jurisdiction over our operations, including the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act 2010, as well as the laws of the countries where we do business.

We are also subject to various trade restrictions, including trade and economic sanctions and export controls, imposed by governments around the world with jurisdiction over our operations. For example, in accordance with trade sanctions administered by the Office of Foreign Assets Control and the U.S. Department of Commerce, we are prohibited from engaging in transactions involving certain persons and certain designated countries or territories, including Cuba, Iran, Syria, North Korea and the Crimea Region of Ukraine. In light of the conflicts between Russia and Ukraine, we may also be prohibited from engaging in transactions involving persons and entities located or headquartered in the so-called Donetsk and Luhansk People’s Republics (DNR and LNR). In addition, our products are subject to export regulations that can involve significant compliance time and may add additional overhead cost to our products. In recent years the United States government has a renewed focus on export matters. For example, the Export Control Reform Act of 2018 and regulatory guidance thereunder have imposed additional controls, and may result in the imposition of further additional controls, on the export of certain “emerging and foundational technologies.” Our current and future products may be subject to these heightened regulations, which could increase our compliance costs. For instance, recent amendments to the U.S. Export Administration Regulations (“EAR”) increased restrictions on exports to certain “military end-users” and for “military end-uses” by certain persons in Burma, Cambodia, China, Iraq, Russia, or Venezuela, which requires us to perform due diligence on customers and end-users in those countries for potential military connections.

We also need to monitor the changes in export-related laws and regulations, such as International Traffic in Arms Regulations (“ITAR”), and their applicability to our products and services. If our products or services become subject to the ITAR, we may be required to obtain licenses, clearances, or authorizations from various regulatory entities. If we are not allowed to export our products or services, or if the clearance process is burdensome, our ability to generate revenue would be adversely affected and our operating costs could increase.

In addition, international sales of certain of our products may be subject to local laws and regulations in foreign jurisdictions which we may not be familiar with. We may not be allowed to ship our products to certain countries without meeting their local laws and regulations. The failure to comply with any of these laws or regulations could adversely affect our ability to conduct our business and generate revenues.

We are committed to doing business in accordance with applicable anti-corruption laws and regulations and with applicable trade restrictions. We are subject, however, to the risk that our affiliated entities or our and our affiliates’ respective officers, directors, employees and agents (including distributors and VARs of our products) may take action determined to be in violation of such laws and regulations. Any violation by us or by any of these persons could result in substantial fines, sanctions, civil and/or criminal

30

penalties, or curtailment of operations in certain jurisdictions, and might adversely affect our operating results. In addition, actual or alleged violations could damage our reputation and ability to do business.

Although we take precautions to prevent violations of applicable anti-corruption laws and regulations and applicable trade restrictions, we may have exported products in the past in apparent violation of the EAR. If we are found to be in violation of U.S. export control laws, it could result in substantial fines and penalties for us and for the individuals working for us. We may also be adversely affected through other penalties, reputational harm, loss of access to certain markets or otherwise.

We are subject to environmental, health and safety laws and regulations related to our operations and the use of our 3D printers and materials, which could subject us to compliance costs and/or potential liability.

We are subject to domestic and foreign environmental, health and safety laws and regulations governing our operations. A certain risk of environmental liability is inherent in our production activities. These laws and regulations govern, among other things, the generation, use, storage, registration, handling, transport and disposal of chemicals and waste materials, the presence of specified substances in electrical products; the emission and discharge of hazardous materials into the ground, air or water; the investigation and cleanup of contaminated sites, including any contamination that results from spills due to our failure to properly dispose of chemicals and other waste materials and the health and safety of our employees. As such, our operations, including our production activities, carry an inherent risk of environmental, health and safety liabilities. Under these laws and regulations, we could be subject to liability for improper disposal of chemicals and waste materials, including those resulting from the use of our systems and accompanying materials by end-users. Accidents or other incidents that occur at our facilities or involve our personnel or operations could result in claims for damages against us. In the event we are found to be financially responsible, as a result of environmental or other laws or by court order, for environmental damages alleged to have been caused by us or occurring on our premises, we could be required to pay substantial monetary damages or undertake expensive remedial obligations. If our operations fail to comply with such laws or regulations, we may be subject to fines and other civil, administrative or criminal sanctions, including the revocation of permits and licenses necessary to continue our business activities, or may be required to make significant expenditures to achieve compliance. In addition, we may be required to pay damages or civil judgments in respect of third-party claims, including those relating to personal injury (including exposure to hazardous substances that we generate, use, store, handle, transport, manufacture or dispose of), property damage or contribution claims. Some environmental laws allow for strict, joint and several liabilities for remediation costs, regardless of fault. We may be identified as a potentially responsible party under such laws. The amount of any costs, including fines or damages payments that we might incur under such circumstances could substantially exceed any insurance we have to cover such losses. Any of these events, alone or in combination, could have a material adverse effect on our business, financial condition and results of operations and could adversely affect our reputation.

We may be subject to environmental laws and regulations concerning the import and export of chemicals and hazardous substances including, without limitation, TSCA and REACH. These laws and regulations require the testing and registration of some chemicals that we ship along with, or that form a part of, our systems and other products. If we fail to comply with these or similar laws and regulations, we may be required to make significant expenditures to reformulate the chemicals that we use in our products and materials or incur costs to register such chemicals to gain and/or regain compliance. Additionally, we could be subject to significant fines or other civil and criminal penalties should we not achieve such compliance.

The cost of complying with current and future environmental, health and safety laws applicable to our operations, or the liabilities arising from releases of, or exposure to, hazardous substances, may result in future expenditures. Any of these developments, alone or in combination, could have an adverse effect on our business, financial condition and results of operations.

Aspects of our business are subject to laws and regulations governing privacy and data security. Changes in laws, regulations, and public perception concerning data protection and privacy, or changes in the interpretation or patterns of enforcement of existing laws and regulations, could impair our efforts to maintain and expand our customer base or the ability of our customers to use our services. Breaches of laws and regulations concerning data protection and privacy could expose us to significant fines and other penalties.

We hold personal information about a variety of individuals, such as our employees, prospects, and our customers. Processing of personal information is increasingly subject to legislation and regulation in numerous jurisdictions around the world.

For example, relevant applicable laws and regulations governing the collection, use, disclosure or other processing of personal information include, in the United States, rules and regulations promulgated under the authority of the Federal Trade Commission, the California Consumer Privacy Act of 2018 (the “CCPA”) and state breach notification laws. In particular, the CCPA, among other things, requires covered ‘Businesses’ to provide new disclosures to California consumers and afford such consumers new rights with respect to their personal information. The CCPA provides for civil penalties for violations, as well as a private right of action for

31

certain data breaches that result in the loss of personal information. This private right of action may increase the likelihood of, and risks associated with, data breach litigation.

In 2020, California passed the California Privacy Rights Act (“CPRA”). Among other changes to the CCPA, the CPRA expands consumer rights, introduces data minimization and retention requirements, and creates the first dedicated privacy regulator in the United States. The CPRA will take effect in 2023, when comprehensive privacy laws recently passed in Virginia and Colorado will also take effect.

In addition to these laws, new privacy and data security laws have been proposed in more than half of the states in the U.S. and in the U.S. Congress, reflecting a trend toward more stringent privacy legislation in the U.S., which trend may accelerate. These laws have prompted a number of proposals for new federal and state-level privacy legislation. Such proposed legislation, if enacted, may add additional complexity, variation in requirements, restrictions and potential legal risk, require additional investment of resources in compliance programs, impact strategies and the availability of previously useful data and could result in increased compliance costs and/or changes in business practices and policies.

Moreover, we maintain offices in the European Union (“EU”), specifically, Ireland, and we have customers located in various countries throughout the EU and the United Kingdom (“UK”). Accordingly, we are subject to the General Data Protection Regulation (EU) 2016/679 (the “GDPR”), and related member state implementing legislation, and to the UK’s Data Protection Act 2018 as well as the UK General Data Protection Regulation (collectively, “European Data Protection Law”). European Data Protection Law places obligations on controllers and processors of personal data, while establishing rights for individuals with respect to their personal data. European Data Protection Law is also explicitly extraterritorial in its application, and could affect our business activities in jurisdictions outside the EU and the UK. Additionally, European Data Protection Law imposes strict rules on the transfer of personal data outside of the EU to countries that do not ensure an adequate level of protection, like the United States. These transfers are prohibited unless an appropriate safeguard specified by the GDPR is implemented, such as the Standard Contractual Clauses (SCCs) or binding corporate rules. The Court of Justice of the European Union (the “CJEU”) recently deemed that these transfers need to be analyzed on a case-by-case basis to ensure EU standards of data protection are met in the jurisdiction where the data importer is based. European regulators have issued recent guidance that imposes significant new diligence requirements on transferring data outside the EU. On June 4, 2021, the EC issued new forms of standard contractual clauses for data transfers from controllers or processors in the EU/EEA (or otherwise subject to the GDPR) to controllers or processors established outside the EU/EEA (and not subject to the GDPR). The new standard contractual clauses replace the standard contractual clauses that were adopted previously under the EU Data Protection Directive. The UK is not subject to the EC’s new standard contractual clauses but has published a draft version of a UK-specific transfer mechanism, which, once finalized, will enable transfers from the UK. We will be required to implement these new safeguards when conducting restricted data transfers under the EU and UK GDPR and doing so will require significant effort and cost. Complying with EU and UK cross-border data rules is and will continue to be expensive and time consuming and may ultimately prevent us from transferring personal data outside the EU and/or UK, which would cause significant business disruption. The GDPR imposes sanctions for violations up to the greater of €20 million (up to £17.5 million for violations of the UK GDPR) and 4% of worldwide gross annual revenue, enables individuals to claim damages for violations and introduces the right for non-profit organizations to bring claims on behalf of data subjects.

The regulatory framework governing the collection, processing, storage, use and sharing of personal information is rapidly evolving and is likely to continue to be subject to uncertainty and varying interpretations. It is possible that these laws may be interpreted and applied in a manner that is inconsistent with our existing data management practices or the features of our services and platform capabilities. We cannot yet fully determine the impact these or future laws, rules, regulations and industry standards may have on our business or operations. Additionally, our customers may be subject to differing privacy laws, rules and legislation, which may mean that they require us to be bound by varying contractual requirements applicable to certain other jurisdictions. Adherence to such contractual requirements may impact our collection, use, processing, storage, sharing and disclosure of personal information and may mean we become bound by, or voluntarily comply with, self-regulatory or other industry standards relating to these matters that may further change as laws, rules and regulations evolve. We have incurred, and may continue to incur, significant expenses to comply with evolving mandatory privacy and security standards and protocols imposed by law, regulation, industry standards, shifting merchant and customer expectations, or contractual obligations, and we may not be able to respond quickly or effectively to regulatory, legislative and other developments. These changes may in turn impair our ability to offer our existing or planned features, products and services and/or increase our cost of doing business.

We publicly post documentation regarding our privacy practices. Although we endeavor to comply with our published policies and documentation, we may at times fail to do so or be alleged to have failed to do so. Any failure or perceived failure by us to comply with our privacy policies or any applicable privacy, security or data protection, information security or consumer-protection related laws, regulations, orders or industry standards could expose us to costly litigation, significant awards, fines or judgments, civil and/or criminal penalties or negative publicity, and could materially and adversely affect our business, financial condition and results of operations. The publication of our privacy policy and other documentation that provide promises and assurances about privacy and

32

security can subject us to potential state and federal action if they are found to be deceptive, unfair, or misrepresentative of our actual practices, which could, individually or in the aggregate, materially and adversely affect our business, financial condition and results of operations.

We rely on our software and information technology systems to manage numerous aspects of our business and a disruption of these systems could adversely affect our business.

We rely on our information technology systems to manage numerous aspects of our business, including to efficiently purchase products from our suppliers, provide procurement and logistic services, ship products to our customers, receive orders from our customers, manage our accounting and financial functions, including our internal controls, and maintain our research and development data. Our information technology systems are an essential component of our business and any disruption could significantly limit our ability to manage and operate our business efficiently. A failure of our information technology systems to perform properly could disrupt our supply chain, product development and customer experience, which may lead to increased overhead costs and decreased sales and have an adverse effect on our reputation and our financial condition. In particular, our integrated software platform is an essential system that virtually all of our customers depend on for their design needs. If our integrated software platform were to fail, we could face adverse consequences to our results of operations, financial condition and business reputation. In addition, during the COVID-19 pandemic, a substantial portion of our employees are conducting work remotely, making us more dependent on potentially vulnerable communications systems and making us more vulnerable to cyberattacks.

Although we take steps and incur significant costs to secure our information technology systems, including our computer systems, intranet and internet sites, email and other telecommunications and data networks, our security measures may not be effective and our systems may be vulnerable to damage or interruption. Disruption to our information technology systems could result from power outages, computer and telecommunications failures, computer viruses, cyber-attack or other security breaches, catastrophic events such as fires, floods, earthquakes, tornadoes, hurricanes, acts of war, terrorism and usage errors by our employees.

Our reputation and financial condition could be adversely affected if, as a result of a significant cyber-event or otherwise:

In addition, any unauthorized access, disclosure or other loss or unauthorized use of information or data could result in legal claims or proceedings, regulatory investigations or actions, and other types of liability under laws that protect the privacy and security of personal information, including federal, state and foreign data protection and privacy regulations, violations of which could result in significant penalties and fines. In addition, although we seek to detect and investigate all data security incidents, security breaches and other incidents of unauthorized access to our information technology systems and data can be difficult to detect and any delay in identifying such breaches or incidents may lead to increased harm and legal exposure.

The cost of investigating, mitigating and responding to potential data security breaches and complying with applicable breach notification obligations to individuals, regulators, partners and others can be significant. Our insurance policies may not be adequate to compensate us for the potential costs and other losses arising from such disruptions, failures or security breaches. In addition, such insurance may not be available to us in the future on economically reasonable terms, or at all. Further, defending a suit, regardless of its merit, could be costly, divert management attention and harm our reputation.

If our computer systems are damaged or cease to function properly, or, if we do not replace or upgrade certain systems, we may incur substantial costs to repair or replace them and may experience an interruption of our normal business activities or loss of critical data. Any such disruption could adversely affect our reputation and financial condition.

We also rely on information technology systems maintained by third parties, including third-party cloud computing services and the computer systems of our suppliers for both our internal operations and our customer-facing infrastructure related to our additive manufacturing solutions. These systems are also vulnerable to the types of interruption and damage described above but we have less ability to take measures to protect against such disruptions or to resolve them if they were to occur. Information technology problems faced by third parties on which we rely could adversely impact our business and financial condition as well as negatively impact our brand reputation.

33

Any unauthorized control or manipulation of our products’ systems could result in loss of confidence in us and our products and harm our business.

Our products contain complex information technology systems. For example, our additive manufacturing machines are designed with built-in data connectivity to accept and install periodic remote updates from us to monitor, improve and update their functionality. We have designed, implemented and tested security measures intended to prevent unauthorized access to our information technology networks, our products and their systems. However, hackers may attempt to gain unauthorized access to modify, alter and use such networks, products and systems to gain control of, or to change, our products’ functionality, user interface and performance characteristics, or to gain access to data stored in or generated by our products. We encourage reporting of potential vulnerabilities in the security of our products and we aim to remedy any reported and verified vulnerability. Accordingly, we have received reports of potential vulnerabilities in the past and have attempted to remedy them. However, there can be no assurance that vulnerabilities will not be exploited in the future before they can be identified, or that our remediation efforts are or will be successful.

Any unauthorized access to or control of our products or their systems or any loss of data could result in legal claims or proceedings. In addition, regardless of their veracity, reports of unauthorized access to our products, their systems or data, as well as other factors that may result in the perception that our products, their systems or data are capable of being “hacked,” could negatively affect our brand and harm our business, prospects, financial condition and operating results.

Our business has risks that may not be adequately covered by insurance or indemnity.

We may face unanticipated risks of legal liability for damages caused by the actual or alleged failure of our products. While we have attempted to secure liability insurance coverage at an appropriate cost, it is impossible to adequately insure against all risks inherent in our industry, nor can we assure you that our insurers will pay a particular claim, or that we will be able to maintain coverage at reasonable rates in the future. Our insurance policies also contain deductibles, limitations and exclusions, which increase our costs in the event of a claim. Even a partially uninsured claim of significant size, if successful, could have an adverse effect on our financial condition. In addition, we may not be able to continue to obtain insurance coverage on commercially reasonable terms, or at all, and our existing policies may be canceled or otherwise terminated by the insurer. Maintaining adequate insurance and successfully accessing insurance coverage that may be due for a claim can require a significant amount of our management’s time, and we may be forced to spend a substantial amount of money in that process. Substantial claims in excess of or not otherwise covered by indemnity or insurance could harm our financial condition and operating results.

Risks Related to Intellectual Property

We may not be able to adequately protect our proprietary and intellectual property rights in our data or technology.

Our success is dependent, in part, upon protecting our proprietary information and technology. Our intellectual property portfolio primarily consists of patents, patent applications, registered and unregistered trademarks, unregistered copyrights, domain names, know-how, and trade secrets. We may be unsuccessful in adequately protecting our intellectual property.

Our trade secrets, know-how and other unregistered proprietary rights are a key aspect of our intellectual property portfolio. While we take reasonable steps to protect our trade secrets and confidential information and enter into confidentiality and invention assignment agreements intended to protect such rights, such agreements can be difficult and costly to enforce or may not provide adequate remedies if violated, and we may not have entered into such agreements with all relevant parties. Such agreements may be breached and trade secrets or confidential information may be willfully or unintentionally disclosed, including by employees who may leave our company and join our competitors, or our competitors or other parties may learn of the information in some other way. Additionally, certain unauthorized use of our intellectual property may go undetected, or we may face legal or practical barriers to enforcing our legal rights even where unauthorized use is detected. The disclosure to, or independent development by, a competitor of any of our trade secrets, know-how or other technology not protected by a patent or other intellectual property system could materially reduce or eliminate any competitive advantage that we may have over such competitor. This concern could manifest itself in particular with respect to our proprietary materials that are used with our systems. Portions of our proprietary materials may not be afforded patent protection. Our pending patent applications may not be granted, and we may not be able to obtain foreign patents or pending applications corresponding to our U.S. patents. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If our patents and other intellectual property do not adequately protect our technology, our competitors may be able to offer products similar to ours. Our competitors may also be able to develop similar technology independently or design around our patents and other intellectual property. Any of the foregoing events would lead to increased competition and reduce our revenue or gross margin, which would adversely affect our operating results.

Current laws may not provide for adequate protection of our products, especially in foreign jurisdictions which may have laws that provide insufficient protections to companies. In addition, legal standards relating to the validity, enforceability, and scope of protection of proprietary rights in internet-related businesses are uncertain and evolving, and changes in these standards may adversely

34

impact the viability or value of our proprietary rights. Some license provisions protecting against unauthorized use, copying, transfer, and disclosure of our products, or certain aspects of our products may be unenforceable under the laws of certain jurisdictions. Further, the laws of some countries do not protect proprietary rights to the same extent as the laws of the United States, and the laws and mechanisms for protection and enforcement of intellectual property rights in some foreign countries may be inadequate. As we continue to operate in foreign countries and expand our international activities, we have encountered and may in the future encounter challenges in navigating the laws of foreign countries, which may adversely affect our ability to protect our proprietary rights. Further, competitors, foreign governments, foreign government-backed actors, criminals, or other third parties may gain unauthorized access to our proprietary information and technology. Accordingly, despite our efforts, we may be unable to prevent third parties from infringing upon or misappropriating our technology and intellectual property or claiming that we infringe upon or misappropriate their technology and intellectual property.

To protect our intellectual property rights, we may be required to spend significant resources to monitor, protect, and defend these rights, and we may or may not be able to detect infringement by our customers or third parties. Litigation has been and may be necessary in the future to enforce our intellectual property rights and to protect our trade secrets. Such litigation, regardless of merit, could be costly, time consuming, and distracting to management and key technical personnel, and could result in the impairment or loss of portions of our intellectual property. Furthermore, our efforts to enforce our intellectual property rights may be met with defenses, counterclaims, and countersuits attacking the validity and enforceability of our intellectual property rights. Our inability to protect our proprietary technology against unauthorized copying or use, as well as any costly litigation or diversion of our management’s attention and resources, could delay further sales or the implementation of our platform, impair the functionality of our platform, delay introductions of new features, integrations, and capabilities, result in our substituting inferior or more costly technologies into our platform, or injure our reputation. In addition, we may be required to license additional technology from third parties to develop and market new features, integrations, and capabilities, and we cannot be certain that we could license that technology on commercially reasonable terms or at all, and our inability to license this technology could harm our ability to compete.

As part of any settlement or other compromise to avoid complex, protracted litigation, we may agree not to pursue future claims against a third party, including related to alleged infringement of our intellectual property rights. Part of any settlement or other compromise with another party may resolve a potentially costly dispute but may also have future repercussions on our ability to defend and protect our intellectual property rights, which in turn could adversely affect our business.

If third parties claim that we infringe upon or otherwise violate their intellectual property rights, our business could be adversely affected.

We are, have in the past and may in the future be subject to claims that we have infringed or otherwise violated third parties’ intellectual property rights. There is patent, copyright and other intellectual property development and enforcement activity in our industry and relating to the additive manufacturing technology we use in our business. Our future success depends in part on not infringing upon or otherwise violating the intellectual property rights of others. From time to time, our competitors or other third parties (including non-practicing entities and patent holding companies) may claim that we are infringing upon or otherwise violating their intellectual property rights, and we may be found to be infringing upon or otherwise violating such rights. We may be unaware of the intellectual property rights of others that may cover some or all of our current or future technology or conflict with our rights, and the patent, copyright, and other intellectual property rights of others may limit our ability to improve our technology and compete effectively. Any claims of intellectual property infringement or other intellectual property violations, even those without merit, could:

Any royalty or licensing agreements, if required, may not be available to us on acceptable terms or at all. A successful claim of infringement against us could result in our being required to pay significant damages, enter into costly settlement agreements, or prevent us from offering our platform or products, any of which could have a negative impact on our operating profits and harm our future prospects. We may also be obligated to indemnify our customers or business partners in connection with any such litigation and to obtain licenses, modify our platform or products, or refund premium subscription fees, which could further exhaust our resources. Such disputes could also disrupt our platform or products, adversely affecting our customer satisfaction and ability to attract customers.

35

Our additive manufacturing technology contains third-party open-source software components, and failure to comply with the terms of the underlying open-source software licenses could restrict our ability to commercialize our products.

Our additive manufacturing technology contains components that are licensed under so-called “open source,” “free” or other similar licenses. Open source software is made available to the general public on an “as-is” basis under the terms of a non-negotiable license. We currently combine our proprietary software with open source software and intend to continue doing so in the future. Additionally, we make some of our source code available under open source licenses, which may limit our ability to protect our intellectual property rights in our source code and prevent our competitors or others from using such source code. Our use and distribution of open source software may entail greater risks than use of third-party commercial software because open source licensors generally do not provide warranties or other contractual protections regarding infringement claims or the quality of the code. In addition, if we combine our proprietary software with open source software in a certain manner, we could, under certain open source licenses, be required to disclose or make available the source code of our proprietary software to third parties. We may also face claims alleging noncompliance with open source license terms or infringement or misappropriation of third-party intellectual property rights in open source software. These claims could result in litigation, require us to purchase a costly license or remove the software. In addition, if the license terms for open source software that we use change, we may be forced to re-engineer our solutions, incur additional costs or discontinue the sale of our offerings if re-engineering could not be accomplished on a timely basis. Although we monitor our use of open source software to avoid subjecting our offerings to unintended conditions, there is a risk that these licenses could be construed in a way that could impose unanticipated conditions or restrictions on our ability to commercialize our offerings. We cannot guarantee that we have incorporated open source software in our software in a manner that will not subject us to liability or in a manner that is consistent with our current policies and procedures.

General Risk Factors

We will continue to incur increased costs as a result of operating as a public company, and our management are required to devote substantial time to new compliance initiatives.

As a public company, we incur significant legal, accounting and other expenses that we did not incur as a private company. In addition, the Sarbanes Oxley Act of 2002 and rules subsequently implemented by the Securities and Exchange Commission and the New York Stock Exchange (“NYSE”) have imposed various requirements on public companies, including establishment and maintenance of effective disclosure and financial controls and corporate governance practices. Our management and other personnel need to devote a substantial amount of time to these compliance initiatives. Moreover, these rules and regulations increase our legal and financial compliance costs and make some activities more time-consuming and costly. For example, we expect that these rules and regulations may make it more difficult and more expensive for us to obtain director and officer liability insurance.

Pursuant to Section 404 of the Sarbanes Oxley Act of 2002 (the “Sarbanes Oxley Act”), we are required to furnish a report by our management on our internal control over financial reporting, including an attestation report on internal control over financial reporting issued by our independent registered public accounting firm. However, while we remain an emerging growth company, we are not required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm. To achieve compliance with Section 404 of the Sarbanes Oxley Act within the prescribed period, we are engaged in a process to document and evaluate our internal control over financial reporting, which is both costly and challenging. In this regard, we need to continue to dedicate internal resources, potentially engage outside consultants and adopt a detailed work plan to assess and document the adequacy of internal control over financial reporting, continue steps to improve control processes as appropriate, validate through testing that controls are functioning as documented and implement a continuous reporting and improvement process for internal control over financial reporting. Despite our efforts, there is a risk that neither we nor our independent registered public accounting firm will be able to conclude within the prescribed timeframe that our internal control over financial reporting is effective as required by Section 404 of the Sarbanes Oxley Act. This could result in an adverse reaction in the financial markets due to a loss of confidence in the reliability of our financial statements. In addition, if we are not able to continue to meet these requirements, we may not be able to remain listed on NYSE.

Changes in accounting rules and regulations, or interpretations thereof, could result in unfavorable accounting charges or require us to change our compensation policies.

Accounting methods and policies for public companies are subject to review, interpretation and guidance from our independent registered accounting firm and relevant accounting authorities, including the SEC. Changes to accounting methods or policies, or interpretations thereof, may require us to reclassify, restate or otherwise change or revise our consolidated financial statements.

Our disclosure controls and procedures may not prevent or detect all errors or acts of fraud.

We designed our disclosure controls and procedures to reasonably assure that information we must disclose in reports we file or submit under the Exchange Act is accumulated and communicated to management, and recorded, processed, summarized and reported

36

within the time periods specified in the rules and forms of the SEC. We believe that any disclosure controls and procedures or internal controls and procedures, no matter how well-conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people or by an unauthorized override of the controls.

Our management team has limited experience managing a public company.

Our management team has limited experience managing a publicly traded company, interacting with public company investors, and complying with the increasingly complex laws, rules and regulations that govern public companies. As a public company, we are subject to significant obligations relating to reporting, procedures and internal controls, and our management team may not successfully or efficiently manage such obligations. These obligations and scrutiny require significant attention from our management and could divert their attention away from the day-to-day management of our business, which could adversely affect our business, financial condition and results of operations.

Our internal controls over financial reporting currently do not meet all of the standards contemplated by Section 404 of the Sarbanes Oxley Act, and failure to achieve and maintain effective internal controls over financial reporting in accordance with Section 404 of the Sarbanes Oxley Act could impair our ability to produce timely and accurate financial statements or comply with applicable regulations and have a material adverse effect on our business.

We operated as a private company until July 2021. Our management has significant requirements for enhanced financial reporting and internal controls as a public company. The process of designing and implementing effective internal controls is a continuous effort that requires us to anticipate and react to changes in our business and the economic and regulatory environments and to expend significant resources to maintain a system of internal controls that is adequate to satisfy our reporting obligations as a public company. If we are unable to establish or maintain appropriate internal financial reporting controls and procedures, it could cause us to fail to meet our reporting obligations on a timely basis or result in material misstatements in our consolidated financial statements, which could harm our operating results. In addition, we are required, pursuant to Section 404 of the Sarbanes Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting. This assessment needs to include disclosure of any material weaknesses identified by our management in our internal control over financial reporting.

The rules governing the standards that must be met for our management to assess our internal control over financial reporting are complex and require significant documentation, testing, and possible remediation. Testing and maintaining internal controls may divert management’s attention from other matters that are important to our business. Our independent registered public accounting firm will be required to attest to the effectiveness of our internal control over financial reporting on an annual basis. However, while we remain an emerging growth company, we will not be required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm. If we are not able to complete our initial assessment of our internal controls and otherwise implement the requirements of Section 404 of the Sarbanes Oxley Act in a timely manner or with adequate compliance, our independent registered public accounting firm may not be able to certify as to the adequacy of our internal control over financial reporting.

In addition to our results determined in accordance with GAAP, we believe certain non-GAAP measures may be useful in evaluating our operating performance. We present certain non-GAAP financial measures in this Annual Report on Form 10-K and intend to continue to present certain non-GAAP financial measures in future filings with the SEC and other public statements. Any failure to accurately report and present our non-GAAP financial measures could cause investors to lose confidence in our reported financial and other information, which would likely have a negative effect on the trading price of our common stock.

We have identified material weaknesses in our internal control over financial reporting and may identify additional material weaknesses in the future or fail to maintain effective internal control over financial reporting, which may result in material misstatements of our consolidated financial statements or cause us to fail to meet our periodic reporting obligations.

We have identified material weaknesses in our internal control over financial reporting. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. These material weaknesses are as follows:

37

These material weaknesses resulted in audit adjustments to the following financial statement line items in our financial statements: operating expense, other expense, interest expense, other assets, other liabilities, additional paid in capital, treasury stock, retained earnings, note receivable—equity, and series D preferred stock. These adjustments were recorded prior to the issuance of the consolidated financial statements as of and for the years ended December 31, 2020 and 2019. Additionally, these material weaknesses resulted in audit adjustments to additional paid in capital and stock based compensation expense for the quarters ended June 30, 2021, September 30, 2021, and December 31, 2021. The material weakness related to accounting for warrant instruments resulted in the restatement of the previously issued financial statements of AONE, the entity we merged with at Closing, related to warrant liabilities and equity. Additionally, these material weaknesses could result in a misstatement of substantially all of our accounts or disclosures that would result in a material misstatement to the annual or interim consolidated financial statements that would not be prevented or detected.

We are in the process of designing and implementing controls and taking other actions to remediate the material weaknesses described above, including the following:

38

We have hired additional accounting and IT personnel, including the hiring of a new chief financial officer in April 2021, engaged third party resources to assist us in designing and implementing controls related to period-end financial reporting, segregation of duties, and IT general controls, and begun to implement appropriate segregation of duties in the operation of manual controls. The material weaknesses will not be considered remediated until management completes the design and implementation of the measures described above and the controls operate for a sufficient period of time and management has concluded, through testing, that these controls are effective.

We are working to remediate the material weaknesses as efficiently and effectively as possible and expect full remediation could potentially go beyond December 31, 2022. At this time, we cannot provide an estimate of costs expected to be incurred in connection with implementing this remediation plan; however, these remediation measures will be time consuming, will result in us incurring significant costs, and will place significant demands on our financial and operational resources.

Our ability to use net operating loss (“NOL”) carryforwards and other tax attributes may be limited following the Merger.

We have incurred substantial losses during our history and our ability to become profitable in the near future is uncertain. To the extent that we continue to generate taxable losses, unused losses will carry forward to offset future taxable income, if any, until such unused losses expire (if at all). As of December 31, 2021, we had federal NOL carryforwards of approximately $114.5 million, of which $15.0 million are subject to expire at various times beginning in 2033, and $99.5 million that have no expiration date and will be carried forward indefinitely. We also had state NOL carryforwards of approximately $61.6 million that will begin to expire in 2033, unless previously utilized. On December 31, 2021, we had federal and state research and development credit carryforwards of approximately $2.5 million and $1.6 million, respectively. The research and development credit carryforwards will begin expiring in 2030, unless previously utilized.

Federal NOLs incurred in tax years beginning after December 31, 2017 and before January 1, 2021 may be carried back to each of the five tax years preceding such loss, and NOLs arising in tax years beginning after December 31, 2020 may not be carried back. Because we have had no taxable income in prior years, we do not anticipate carrying back any of our net operating losses. Moreover, federal NOLs generated in taxable years ending after December 31, 2017, may be carried forward indefinitely, but the deductibility of such federal NOLs may be limited to 80% of our taxable income annually for tax years beginning after December 31, 2020. Our NOL carryforwards are subject to review and possible adjustment by the IRS, and state tax authorities. In addition, in general, under Sections 382 and 383 of the Code, a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its pre-change NOLs or tax credits to offset future taxable income or taxes. For these purposes, an ownership change generally occurs where the aggregate stock ownership of one or more stockholders or groups of stockholders who own at least 5% of a corporation’s stock increases their ownership by more than 50 percentage points over their lowest ownership percentage within a specified testing period. Our existing NOLs or credits may be subject to limitations arising from previous ownership changes, and future changes in our stock ownership, many of which are outside of our control, could result in an ownership change under Sections 382 and 383 of the Code. Our NOLs or credits may also be impaired under state law. Accordingly, we may not be able to utilize a material portion of our NOLs or credits. If we determine that an ownership change has occurred and our ability to use our historical NOLs or credits is materially limited, it will harm our future operating results by effectively increasing our future tax obligations. Section 382 and 383 of the Code would apply to all net operating loss and tax credit carryforwards, whether the carryforward period is indefinite or not. If we earn taxable income, such limitations could result in increased future tax liability to us and our future cash flows could be adversely affected. We have recorded a full valuation allowance related to our NOLs and other deferred tax assets due to the uncertainty of the ultimate realization of the future benefits of those assets.

Comprehensive tax reform legislation could adversely affect our business and financial condition.

The rules dealing with U.S. federal, state and local income taxation are constantly under review by persons involved in the legislative process and by the Internal Revenue Service, or IRS, and the U.S. Treasury Department. Changes to tax laws (which changes may have retroactive application) could adversely affect us or holders of our common stock. In recent years, many changes have been made and changes are likely to continue to occur in the future.

Additional changes to U.S. federal income tax law are currently being contemplated. Future changes in tax laws could have a material adverse effect on our business, cash flow, financial condition or results of operations. It cannot be predicted whether, when,

39

in what form, or with what effective dates, new tax laws may be enacted, or regulations and rulings may be enacted, promulgated or issued under existing or new tax laws, which could result in an increase in our or our stockholders’ tax liability or require changes in the manner in which we operate in order to minimize or mitigate any adverse effects of changes in tax law or in the interpretation thereof.

Additional Risks Related to Ownership of Our Common Stock and Us Operating as a Public Company

The price of our common stock and warrants may be volatile.

The price of our Common Stock as well as our Common Stock Warrants may fluctuate due to a variety of factors, including:

These market and industry factors may materially reduce the market price of our Common Stock and warrants regardless of the operating performance of us.

We do not intend to pay cash dividends for the foreseeable future.

We currently intend to retain our future earnings, if any, to finance the further development and expansion of our business and do not intend to pay cash dividends in the foreseeable future. Any future determination to pay dividends will be at the discretion of our board of directors and will depend on our financial condition, results of operations, capital requirements, restrictions contained in future agreements and financing instruments, business prospects and such other factors as its board of directors deems relevant.

If analysts do not continue to publish research about our business or if they publish inaccurate or unfavorable research, our stock price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that analysts publish about our business. We do not have any control over these analysts. We currently have limited research coverage by securities and industry analysts. If other securities or industry analysts do not commence coverage of our company, the trading price for our stock could be negatively impacted. If one or more of the analysts who cover us downgrade our common stock or publish inaccurate or unfavorable research about our business, the price of our common stock would likely decline. If few analysts cover us, demand for our common stock could decrease and our common stock price and trading volume may decline. Similar results may occur if one or more of these analysts stop covering us in the future or fail to publish reports on us regularly.

We may be subject to securities litigation, which is expensive and could divert management attention.

The market price of our common stock may be volatile and, in the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future.

40

Securities litigation against us could result in substantial costs and divert management’s attention from other business concerns, which could seriously harm our business.

Future issuances and/or resales of our Common Stock may increase the volatility of and/or cause the market price of our securities to drop significantly, even if our business is doing well.

14,666,667 shares of our Common Stock may be issued (the “Markforged Earnout Shares”) upon the Company achieving certain Earnout Triggering Events (as described in the Merger Agreement and Note 11 to our consolidated financial statements), and additional shares may be issued upon exercise of the outstanding warrants to purchase shares of our Common Stock. To the extent such additional shares of our Common Stock are issued, it will result in dilution to the holders of our Common Stock and an increase to the number of shares eligible for resale in the public market. Sales, or the potential for sales, of substantial numbers of such shares in the public market could increase the volatility of and/or adversely affect the market price of our Common Stock.

The obligations associated with being a public company involve significant expenses and require significant resources and management attention, which may divert from our business operations.

As a public company, we are subject to the reporting requirements of the Exchange Act and the Sarbanes-Oxley Act. The Exchange Act requires the filing of annual, quarterly and current reports with respect to a public company’s business and financial condition. The Sarbanes-Oxley Act requires, among other things, that a public company establish and maintain effective internal control over financial reporting. As a result, we incur significant legal, accounting and other expenses that we did not previously incur. Our entire management team and many of its other employees will need to devote substantial time to compliance, and may not effectively or efficiently manage its transition into a public company.

These rules and regulations result in us incurring substantial legal and financial compliance costs and make some activities more time-consuming and costly. For example, these rules and regulations will likely continue to make it more difficult and more expensive for us to obtain director and officer liability insurance, and it may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be difficult for us to attract and retain qualified people to serve on its board of directors, its board committees or as executive officers.

We are currently an emerging growth company within the meaning of the Securities Act, and to the extent we have taken advantage of certain exemptions from disclosure requirements available to emerging growth companies or smaller reporting companies, this could make our securities less attractive to investors and may make it more difficult to compare our performance with other public companies.

We are currently an “emerging growth company” within the meaning of the Securities Act, as modified by the JOBS Act, and we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. As a result, our shareholders may not have access to certain information they may deem important. We cannot predict whether investors will find our securities less attractive because we will rely on these exemptions. If some investors find our securities less attractive as a result of our reliance on these exemptions, the trading prices of our securities may be lower than they otherwise would be, there may be a less active trading market for our securities and the trading prices of our securities may be more volatile.

Further, Section 102(b)(1) of the JOBS Act exempts emerging growth companies from being required to comply with new or revised financial accounting standards until private companies (that is, those that have not had a Securities Act registration statement declared effective or do not have a class of securities registered under the Exchange Act) are required to comply with the new or revised financial accounting standards. The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies but any such election to opt out is irrevocable. We have elected not to opt out of such extended transition period, which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can adopt the new or revised standard at the time private companies adopt the new or revised standard. This may make comparison of our financial statements with another public company, which is neither an emerging growth company nor an emerging growth company which has opted out of using the extended transition period, difficult or impossible because of the potential differences in accounting standards used.

When we cease to be an emerging growth company, we will no longer be able to take advantage of certain exemptions from reporting, and, absent other exemptions or relief available from the SEC, we will also be required to comply with the auditor

41

attestation requirements of Section 404 of the Sarbanes-Oxley Act. We will incur additional expenses in connection with such compliance and our management will need to devote additional time and effort to implement and comply with such requirements.

Delaware law and our certificate of incorporation and bylaws contain certain provisions, including anti-takeover provisions that limit the ability of stockholders to take certain actions and could delay or discourage takeover attempts that stockholders may consider favorable.

The DGCL and our certificate of incorporation and bylaws contain provisions that could have the effect of rendering more difficult, delaying, or preventing an acquisition that stockholders may consider favorable, including transactions in which stockholders might otherwise receive a premium for their shares. These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, and therefore depress the trading price of our Common Stock. These provisions could also make it difficult for stockholders to take certain actions, including electing directors who are not nominated by the current members of our board of directors or taking other corporate actions, including effecting changes in our management. Among other things, our certificate of incorporation and bylaws include provisions regarding:

These provisions, alone or together, could delay or prevent hostile takeovers and changes in control or changes in our board of directors or management.

The provisions of our bylaws requiring exclusive forum in the Court of Chancery of the State of Delaware and the federal district courts of the United States for certain types of lawsuits may have the effect of discouraging certain lawsuits, including derivative lawsuits and lawsuits against the directors and officers of us, by limiting plaintiffs’ ability to bring a claim in a judicial forum that they find favorable.

Our bylaws provide that, to the fullest extent permitted by law, and unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware (or, in the event that such court does not have jurisdiction, the federal district court for the District of Delaware or other state courts of the State of Delaware) will be the sole and exclusive forum for any state law claims for (i) any derivative action or proceeding brought on behalf of us, (ii) any action asserting a claim for or based on a breach of a fiduciary duty owed by any current or former director, officer or other employee of us to us or our stockholders, (iii) any action asserting a claim arising pursuant to any provision of the DGCL or the Bylaws or Certificate of Incorporation (as either may be amended from time to time) (including the interpretation, validity and enforceability thereof), (iv) any action asserting a claim related to or involving us that is governed by the internal affairs doctrine, and (v) any action asserting an “internal corporate claim” as that term is defined in Section 115 of the DGCL (the “Delaware Forum Provision”). The Delaware Forum Provision, however, does not apply to actions or claims arising under the Exchange Act. The Bylaws also provide that, unless we consent in writing to the selection of an alternate forum, the sole and exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act, and the rules and regulations promulgated thereunder, will be the Federal District Courts of the United States (the “Federal Forum Provision,” and with the Delaware Forum Provision, the “Exclusive Forum Provisions”). In addition, the Bylaws provide that any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock is deemed to have notice of and consented to the Delaware Forum Provision and the Federal Forum Provision. However, Section 27 of the Exchange Act

42

creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder; cannot and will not be deemed to have waived compliance with the U.S. federal securities laws and the rules and regulations thereunder.

These provisions may impose additional litigation costs on stockholders in pursuing any such claims and have the effect of discouraging certain lawsuits, including derivative lawsuits and lawsuits against our directors and officers, by limiting plaintiffs’ ability to bring a claim in a judicial forum that they find favorable. In addition, while the Delaware Supreme Court ruled in March 2020 that federal forum selection provisions purporting to require claims under the Securities Act be brought in federal court are “facially valid” under Delaware law, there is uncertainty as to whether other courts will enforce our Federal Forum Provision. The Federal Forum Provision may also impose additional litigation costs on stockholders who assert that the provision is not enforceable or invalid, and if the Federal Forum Provision is found to be unenforceable, we may incur additional costs associated with resolving such matters. The Court of Chancery of the State of Delaware and the Federal District Courts of the United States may also reach different judgments or results than would other courts, including courts where a stockholder considering an action may be located or would otherwise choose to bring the action, and such judgments may be more or less favorable to us than our stockholders.

The private placement warrants issued to the Sponsor and the Markforged Earnout Shares, are accounted for as liabilities recorded at fair value upon issuance with changes in fair value each period reported in earnings, which may have an adverse effect on the market price of our Common Stock.

Under U.S. GAAP, we are required to evaluate our warrants to determine whether they should be accounted for as a warrant liability or as equity. We have concluded that the warrants contain provisions requiring liability classification. Therefore, we are accounting for the warrants as a warrant liability and recorded that liability at fair value upon issuance. We will record any subsequent changes in fair value as of the end of each period for which earnings are reported. The impact of changes in fair value on earnings may have an adverse effect on the market price of our common stock and may cause fluctuations in our results of operations based on factors that are outside of our control.

Additionally, the Markforged Earnout Shares are also accounted for as a liability because the triggering events that determine the number of shares to be earned included events that were not indexed to our Common Stock. These liabilities are subject to re-measurement at each balance sheet date. With each such re-measurement, the earnout liability will be adjusted to fair value, with a resulting non-cash gain or loss related to the change in the fair value being recognized in our earnings in the statement of operations. The impact of changes in fair value on earnings may have an adverse effect on the market price of our Common Stock. Due to the recurring fair value measurement, we expect that we will recognize non-cash gains or losses for each future reporting period and that the amount of such gains or losses could be material.

43

Item 1B. Unresolved Staff Comments.

Not applicable.

Item 2. Properties.

Our corporate headquarters is located in an approximately 36,000 square foot facility that we lease at 480 Pleasant Street, Watertown, Massachusetts 02472. The lease of this facility expires in July 2028. We lease another 32,000 square foot facility at 85 School Street, Watertown, Massachusetts 02472. The lease of that facility expires in July 2028. In addition, we lease a 47,000 square foot facility at 4 Suburban Park Drive, Billerica, Massachusetts 10821. The Billerica facility lease expires May 2029. We entered into a lease for a 120,681 square foot facility located at 60 Tower Road, Waltham, Massachusetts 02451, which will become our corporate headquarters. The lease of this facility will begin on April 1, 2022 and expire on September 30, 2031. We believe that our facilities are adequate for our current needs and, should the company need additional space, we believe we will be able to obtain additional space on commercially reasonable terms.

Item 3. Legal Proceedings.

From time to time we are involved in claims that arise during the ordinary course of business. Although the results of litigation and claims cannot be predicted with certainty, we do not currently believe that the outcome of any of these other legal matters (including the matter involving Continuous Composites Inc., which is described in Note 14 to our consolidated financial statements and incorporated herein by reference) will have a material adverse effect on our results of operation or financial condition. Regardless of the outcome, litigation can be costly and time consuming, as it can divert management’s attention from important business matters and initiatives, negatively impacting our overall operations.

Item 4. Mine Safety Disclosures.

Not Applicable.

44

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Our Common Stock and warrants are listed on the New York Stock Exchange under the symbols “MKFG” and “MKFG.WS”, respectively.

Stockholders

As of March 31, 2022, there were 61 holders of record of our Common Stock and 7 holders of record of our warrants. The actual number of stockholders of our Common Stock and the actual number of holders of our warrants is greater than the number of record holders and includes stockholders of our warrants whose Common Stock or warrants are held in street name by brokers and other nominees.

Dividend Policy

We have never declared or paid cash dividends on our capital stock. We do not expect to pay dividends on our capital stock for the foreseeable future, instead anticipating that all of our earnings for the foreseeable future will be used for the operation and growth of our business. The payment of any future dividends will be at the discretion of our board of directors and will depend on various factors, including our operating results, financial condition, capital requirements, growth plans, any contractual and legal restrictions on our payment of dividends, and any other factors deemed relevant by our board of directors.

Recent Sales of Unregistered Securities

All sales of unregistered securities by us during the year ended December 31, 2021 have been included previously in a Quarterly Report on Form 10-Q or in a Current Report on Form 8-K.

Issuer Purchases of Equity Securities

None.

Item 6. Reserved

Reserved.

45

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Unless otherwise indicated or the context otherwise requires, references in this section to “Markforged,” “we,” “us,” “our” and other similar terms refer to Markforged Holding Corporation and its subsidiaries after giving effect to the Merger. The following discussion and analysis summarizes the significant factors affecting the consolidated operating results, financial condition, liquidity and cash flows of our company as of and for the periods presented below. The following discussion and analysis should be read in conjunction with our consolidated financial statements and the related notes thereto included elsewhere in this Annual Report on Form 10-K. The discussion contains forward-looking statements that are based on the beliefs of management, as well as assumptions made by, and information currently available to, our management. Actual results could differ materially from those discussed in or implied by forward-looking statements as a result of various factors, including those discussed below and elsewhere in this Annual Report on Form 10-K, particularly in the sections entitled “Risk Factors” and “Cautionary Note Regarding Forward-Looking Statements.”

Business Overview

Our platform, The Digital Forge, is an intuitive additive manufacturing platform powering engineers, designers and manufacturing professionals globally. The Digital Forge combines precise and reliable 3D printers and metal and composite proprietary materials seamlessly with its cloud-based learning software offering to empower manufacturers to create more resilient and agile supply chains. Founded in 2013 by two MIT-educated engineers, Markforged is based in greater Boston, Massachusetts, where we have our own in-house manufacturing facility and where we design all of our industrial 3D printers, software and metal and composite proprietary materials.

Since our inception, we have incurred significant operating losses. Our ability to generate revenue sufficient to achieve profitability will depend on the successful further development and commercialization of our products. We generated revenue of $91.2 million and $71.9 million for the years ended December 31, 2021 and 2020, respectively, and incurred net profit of $3.9 million including $65.2 million of non-cash mark-to-market gains, and net loss of $18.0 million for those same years. As of December 31, 2021, we had an accumulated deficit of $75.7 million. We expect to continue to incur net losses as we focus on growing commercial sales of our products in both the United States and international markets, including growing our sales teams, scaling our manufacturing operations, continuing research and development efforts to develop new products and further enhance our existing products. Further, we expect to continue to incur additional general and administrative expenses associated with operating as a public company. In addition, we will incur substantial additional spending to build out the global footprint of our sales network, continue investing in research and development to accelerate product innovation, and fund inorganic growth opportunities.

Recent Developments

Merger agreement

On February 23, 2021, one, a Cayman Islands exempted company (“AONE”), entered into an Agreement and Plan of Merger (the “Merger Agreement”) with Caspian Merger Sub Inc., a wholly owned subsidiary of AONE (“Merger Sub”), and MarkForged, Inc. (“Legacy Markforged”), pursuant to which (i) AONE would deregister as a Cayman Islands company and domesticate as a corporation in the State of Delaware and would be renamed “Markforged Holding Corporation” (the “Domestication”) and (ii) Merger Sub would merge with and into Legacy Markforged with Legacy Markforged surviving as a wholly owned subsidiary of Markforged Holding Corporation (the “Merger”). AONE's shareholders approved the transactions contemplated by the Merger Agreement on July 13, 2021, and the Domestication and the Merger were completed on July 14, 2021.

Cash proceeds of the Merger were funded through a combination of AONE’s $132.5 million of cash held in trust (after redemptions of $64.2 million) and an aggregate of $210.0 million in fully committed common stock transactions at $10.00 per share. Upon closing of the Merger (the “Closing”), Legacy Markforged repurchased shares of common stock from certain of its stockholders, for a total value of $45.0 million of cash on hand (the “Employee Transactions”). Total net proceeds upon the Closing, net of the Employee Transactions and transaction costs paid at the Closing of $27.1 million, were $288.8 million.

Impact of the COVID-19 Pandemic and Global Supply Chain Disruption

In December 2019, a novel coronavirus disease (“COVID-19”) was identified and on March 11, 2020, the World Health Organization characterized COVID-19 as a pandemic. We are continuing to closely monitor the impact of the COVID-19 pandemic on all aspects of our business, including how it is impacting our customers, employees, supply chain, and distribution network, as well as the demand for our products in the markets that we serve.

As a result of COVID-19 restrictions on facilities imposed to contain the spread of COVID-19, we experienced delays in shipments and installations as well as decreased utilization of our installed products, leading to a decrease in sales of consumables

46

materials, which had an adverse effect on our revenue, especially in March and April 2020. In response, we undertook certain measures to mitigate the impacts of the COVID-19 pandemic on our financial position, cash flows and supply chain, including a reduction in force during 2020 to control headcount related costs.

More recently, we have experienced longer lead-times, higher costs, and delays in procuring parts and materials. For example, we recently experienced longer lead times and capacity constraints in connection with the raw resources required to manufacture our printing material and we are also facing increased prices in connection with the procurement of the electronic components and custom metal fabricated parts for our printers. We are working closely with our suppliers and customers to minimize impacts, and we continue to closely monitor availability and supply of parts and materials required for our business. However, the extent to which our operations may continue to be impacted by the COVID-19 pandemic and related supply-chain disruptions will depend largely on future developments, which are uncertain and cannot be accurately predicted, including the timing, pace and scale of the recovery of global economic conditions. The magnitude of the adverse impact on our financial condition, results of operations and cash flows will depend on the evolution of our supply chain difficulties.

On September 9, 2021, President Biden directed the Department of Labor’s Occupational Safety and Health Administration (“OSHA”) to issue an Emergency Temporary Standard (“ETS”) requiring that all employers with at least 100 employees ensure that their employees are fully vaccinated for COVID-19 or obtain a negative COVID-19 test at least once a week. However, OSHA withdrew the ETS on January 26, 2022 as an enforceable emergency temporary standard following the Supreme Court’s granting of a stay of its enforcement. OSHA explicitly did not withdraw the ETS as a proposed rule, such that it is possible that a permanent rule regarding COVID-19 vaccination and testing requirements will ultimately be issued by OSHA following a formal rulemaking process. President Biden also issued an Executive Order requiring certain COVID-19 precautions for government contractors and their subcontractors, including mandatory employee vaccination (subject to medical and religious exemptions). These requirements for federal contractors have been the subject of multiple lawsuits and enforcement has been enjoined nationwide, with appeals from those decisions pending in multiple federal appellate courts. It is not currently possible to predict the impact on the Company of a permanent OSHA rule, or the requirements for government contractors and their subcontractors, to the extent that such OSHA rule and requirements for federal contractors are ultimately implemented and enforced. Further, state and local governments in the United States and in international jurisdictions where we operate may implement vaccine mandates and it is not clear if such mandates will go into effect, or stay in effect; whether any will apply to all employees or only to employees who work in the office; and how compliance will be documented. Should such mandates apply to us, we may be required to implement a requirement that all of our employees get vaccinated, subject to limited exceptions. Any requirement to mandate COVID-19 vaccination of our workforce or require our unvaccinated employees to be tested weekly could result in employee attrition and difficulty securing future labor needs. In addition, any requirement to impose obligations on our suppliers under the Executive Order covering government contractors and their subcontractors could impact the price and availability of our supply of raw materials and our results of operations and financial condition could be adversely affected.

Our focus on longer term profitability is based on our investments in research and development, our value added reseller (“VAR”) network, and go to market strategy. Research and development are core to our growth strategy to enable our platform to expand customer use cases and additive technology. We endeavor to expand and optimize our network of VARs which has been key to our expanding unit economics and global distribution.

For more information on operations and risks related to the pandemic and global supply chain disruptions, please see the section of this Annual Report on Form 10-K titled “Risk Factors — General Risk Factors, The global COVID-19 pandemic has significantly affected our business and operations”.

Key Factors Affecting Operating Results

We believe that our financial performance has been and in the foreseeable future will continue to be primarily driven by the factors discussed below. While each of these factors presents significant opportunities for our business, they also pose important challenges that we must successfully address in order to sustain our growth and improve our results of operations.

Hardware sales

Our financial performance has largely been driven by, and in the future will continue to be impacted by, the rate of sales of our hardware. Management focuses on hardware sales as an indicator of current business success and a leading indicator of likely future recurring revenue from consumables, success plans, and premium software subscriptions. We expect our hardware sales to continue to grow as we increase penetration in our existing markets and expand into new markets.

47

Recurring revenue

We regularly assess trends relating to recurring revenue which includes consumables, services, and premium software subscriptions. The consumables revenue stream includes metals, continuous fiber, and chopped fiber materials used by customers as print media. Our services revenue is made up of revenue generated from hardware maintenance contracts (which we also refer to as “Success Plans”) and premium software subscriptions. The Success Plan revenue stream primarily consists of hardware maintenance services generally realized over a period of one to three years. Premium software subscriptions relate to certain cloud software solutions sold separately from our standard cloud-based software platform offering that is fully integrated with our hardware. Recurring revenue was 29% and 27% of total revenue for the years ended December 31, 2021 and 2020, respectively. Our recurring revenue as a percentage of total revenue may vary based upon new product placements in the period as well as consumption trends impacted by macroeconomic factors, customer behavior, and the useful life of our hardware. As our cumulative historical hardware sales increase, recurring revenue on an absolute basis is expected to increase and over time should be an increasingly important contributor to our total revenue.

Go to market

We believe that we are in a strong position within the industry with our accessible solutions that offer users design flexibility and industrial strength parts. Accordingly, we continue to invest in operations and sales channels necessary to scale out business and continue to gain market share and open new market opportunities. We have proven an ability to design, manufacture, and distribute products through channels that provide a high value to customers at gross margins higher than many of our competitors. In addition to our go to market strategy, our integrated platform of hardware, software and consumables has been core to our success and we will continue to drive value through research and development as we introduce smarter and more adaptive technology that is expected to improve our integrated platform and, ultimately, the value provided by our 3D printers. We believe these investments are critical to achieve long-term scalability, but expect the near term impacts will be a muting of our short term profitability.

Seasonality

Historically, the sales of our 3D printers have been subject to seasonality and we have seen higher hardware sales in the third and fourth quarters. We believe this trend is likely driven by available funds in federal capital budgets at the end of the third quarter and commercial budgets at year end which they direct towards the evolution of their manufacturing processes through investments in additive manufacturing.

Components of Results of Operations

Revenue

The majority of our revenue results from the sale of hardware, including our additive manufacturing products, and related consumables. We deliver products and services primarily through our VAR network, who purchase and resell our products to end users. Hardware and consumables revenue is recognized upon transfer of control to the customer, which is typically the VAR, and generally takes place at the point of shipment. We also generate a portion of our revenue from hardware maintenance services and our premium software subscriptions. Revenue from hardware maintenance services for our additive manufacturing products is primarily generated through one-year or three-year contracts and is recognized ratably over the term of the agreement. Revenue related to software subscriptions is recognized ratably over the term of the subscription. Our VARs may provide installation services, as needed depending on the product.

Cost of revenue

Our cost of revenue consists of the cost of product, software subscriptions, maintenance services, personnel costs, third party logistics, warranty fulfillment costs, and overhead. Cost of products includes the manufacturing cost of our additive manufacturing products and consumables. We primarily utilize third party manufacturers for the production of our additive manufacturing hardware while we utilize our own manufacturing facilities and personnel for the production of our consumables. The costs of revenue for internally manufactured products include the cost of raw materials, labor conversion costs, and overhead related to our manufacturing operations, including depreciation. Cost of maintenance services includes personnel-related costs associated with our customer success teams’ provision of remote and on-site support services to our customers and the costs of replacement parts.

Our cost of revenue also includes indirect costs of providing our products and services to customers which consist primarily of reserves for excess and obsolete inventory and stock-based compensation.

We expect our cost of revenue to increase in absolute dollars in future periods as we expect our revenues to continue to grow.

48

Gross profit and gross margin

Our gross profit is calculated based on the difference between our revenues and cost of revenue. Gross margin is the percentage obtained by dividing gross profit by our revenue. Our gross profit and gross margin are, or may be, influenced by a number of factors, including:

We expect our gross margins to fluctuate over time, depending on the factors described above.

Research and development

Our research and development expenses represent costs incurred to support activities that advance the development of innovative additive manufacturing technology, new printer products, development of proprietary printing materials, as well as activities that enhance the functionality of our offerings. Our research and development expenses consist primarily of employee-related personnel expenses, prototypes, facilities costs, and engineering services. We expect research and development costs will increase in absolute dollars over time as we continue to invest in our product portfolio.

Sales and marketing

Sales and marketing expenses consist primarily of personnel-related costs for our sales and marketing departments, costs related to sales commissions, trade shows, advertising, facilities costs, and other demand generation services. We expect our sales and marketing costs will increase over time as we expand our headcount, optimize our reseller network and invest in brand awareness and demand generation.

General and administrative

General and administrative expenses consist primarily of personnel-related costs for our executive leadership and finance, human resources and IT departments. We expect our general and administrative costs will increase over time as we expand our headcount to support growth in our global business, our VAR network and our customer base.

Change in fair value of derivative liabilities

Change in fair value of derivative liabilities primarily includes the change in fair value of the contingent earnout liability and private placement warrant liability. Each was accounted for as a liability as of the date of the Merger and remeasured to fair value at the end of the reporting period.

Other expense

Other expense includes other non-operating expenses.

Interest expense

Interest expense includes interest accrued on our debt and the amortization of deferred debt issuance costs.

49

Interest income

Interest income includes interest earned on deposits and short-term investments.

Income taxes

Our income tax provision consists of an estimate for U.S. federal and state income taxes based on enacted rates, as adjusted for allowable credits, deductions, changes in deferred tax assets and liabilities and changes in tax law. Due to cumulative losses, we maintain a valuation allowance against our U.S. and state deferred tax assets.

Results of Operations

The results of operations presented below should be reviewed in conjunction with the consolidated financial statements and notes included elsewhere in this Annual Report on Form 10-K. The following tables set forth our results of operations for the periods presented.

Comparison of the year ended December 31, 2021 and 2020

Revenue, cost of revenue, and gross margin

We earn revenue from the sale of hardware, consumables, and service contracts. The hardware revenue stream includes 3D composite printers, 3D metal printers, and sintering furnaces. The consumables revenue stream includes chopped fiber materials, metals, and continuous fiber used by customers as print media. The services revenue stream primarily consists of warranty and maintenance contracts and software subscriptions.

The following table sets forth the changes in the components of gross margin for the years ended December 31, 2021 and 2020.

50

Comparison of revenue

The following table disaggregates the Company’s revenue based on the nature of the products and services:

Consolidated revenue for the year ended December 31, 2021 was $91.2 million compared with prior year revenue of $71.9 million representing an increase of 27%, predominantly driven by an increase in hardware revenue as well as consumables revenue.

Hardware revenue increased approximately 25% for the year ended December 31, 2021 compared to the year ended December 31, 2020 primarily driven by more hardware units of our industrial composite and metal printers sold. Consumables revenue increased 26% primarily driven by the increase in material utilization by active printers in the field, the incremental volume as a result of new printer sales, and the return of certain printers to active duty following inactivity caused by the COVID-19 pandemic. Service revenue increased 58% primarily driven by an increase in the number of hardware units sold, which have a warranty and maintenance contract, as well as the introduction of software subscription services, including Eiger Fleet and Blacksmith.

Cost of revenue and gross profit

Consolidated cost of revenue for the year ended December 31, 2021 was $38.4 million compared with cost of revenue of $29.9 million for the year ended December 31, 2020 representing an increase of 28%, primarily due to an increase in the volume and cost of mechanical and electronic components and labor to support increased hardware sales, offset by efficiencies in hardware production. The increased costs were largely driven by the labor shortages and supply chain constraints that were prevalent in the market throughout 2021. Gross profit for the year ended December 31, 2021 was $52.9 million compared with gross profit of $41.9 million for the year ended December 31, 2020 representing an increase of 26%. Gross profit margin for the years ending December 31, 2021 and 2020 was 58%.

Operating expenses

The following table sets forth the components of operating expenses for the years ended December 31, 2021 and 2020.

Sales and marketing expenses increased 60% for the year ended December 31, 2021, primarily due to an increase in headcount and related costs of $3.0 million, external contractor costs of $3.0 million, advertising expense of $3.0 million, and stock-based compensation expense of $1.6 million. There was also an increase in trade show participation and related expenses of $0.8 million. The increase in sales and marketing expense is directly correlated to our growth strategy as additional personnel, contractors, and advertising efforts were deployed to increase sales and brand recognition.

Research and development expenses increased 87% for the year ended December 31, 2021 primarily due to an increase in headcount and related costs of $6.0 million, stock-based compensation of $3.8 million, prototype research and development costs of $1.8 million, and external contractor costs of $1.1 million. The increase in research and development expenses is directly related to the continued investment in product growth and development. The latest product introduced to the public, the FX20 industrial 3D printer, debuted in November 2021.

51

General and administrative expenses increased 128% in the year ended December 31, 2021 primarily due to an increase in headcount and related costs of $6.4 million and stock-based compensation expense of $10.8 million. These increases were driven by additions to our management team to position the company for future growth and additional key personnel to support our public company infrastructure. There were various other expenses incurred due to the Merger, including an increase in legal fees of $3.0 million, contractor expenses of $2.0 million, and transaction expenses of $2.0 million related to our public offering.

Change in fair value of warrant liabilities and contingent earnout liability, and other expense

The following table sets forth the fair value changes and other expense for the years ended December 31, 2021 and 2020:

Fair value of derivative liabilities decreased creating additional income of $65.2 million for the year ended December 31, 2021 compared to the year ended December 31, 2020, primarily related to the change in fair value of the derivative liability for the earnout shares of $63.4 million, calculated as the change in value between the Closing of $123.1 million and the value as of December 31, 2021 of $59.7 million. The change in fair value of the Private Placement Warrants (as defined below) issued since the Closing was $3.1 million. The changes in fair value directly correlate with the change in the Company's common stock price between the Closing date of July 14, 2021 and December 31, 2021. The offsetting change of $1.3 million is due to the increase in fair value of the warrants held prior to the Merger.

The increase in other expense was primarily due to the $0.1 million increase in foreign exchange loss driven by the increase of sales to foreign countries, and a $0.1 million increase in franchise tax.

Provision for income taxes

We recorded a de minimis provision for income taxes for both the years ended December 31, 2021 and 2020.

Non-GAAP Financial Measures

In addition to our financial results determined in accordance with U.S. generally accepted accounting principles (“GAAP”), we believe that Adjusted EBITDA, a non-GAAP financial measure, has been useful in evaluating the performance of our business. However, we intend to stop using Adjusted EBITDA as a financial measure beginning in 2022.

We define EBITDA, a non-GAAP financial measure used in calculating Adjusted EBITDA, as net profit (loss) and comprehensive income (loss) less interest income, interest expense, income tax expense, and depreciation and amortization expense. We define Adjusted EBITDA, a non-GAAP financial measure, as EBITDA less stock-based compensation expense, net change in fair value of warrant liabilities and contingent earnout liabilities, and non-recurring transaction costs.

We have historically monitored Adjusted EBITDA as a measure of our overall business performance, which enables us to analyze our performance without the effects of non-cash items and one-time charges. While we believe that Adjusted EBITDA has historically been useful in evaluating our business, Adjusted EBITDA is a non-GAAP financial measure that has limitations as an analytical tool. Adjusted EBITDA can be useful in evaluating our performance by eliminating the effect of financing, capital expenditures, and non-cash expenses such as stock-based compensation, however, we may incur such expenses in the future which could impact future results. We also believe that the presentation of the non-GAAP financial measures in this Annual Report on Form 10-K provides an additional tool for investors to use in comparing our core business and results of operations over multiple periods with other companies in our industry, many of which present similar non-GAAP financial measures to investors.

In addition, other companies, including companies in our industry, may calculate Adjusted EBITDA differently or not at all, which reduces the usefulness of this measure as a tool for comparison.

52

A summary of our cash flows from operating, investing and financing activities is provided below. We recommend that you review the reconciliation of Adjusted EBITDA to net profit (loss) and comprehensive income (loss), the most directly comparable GAAP financial measures, and that you not rely on any single financial measure to evaluate our business.

Adjusted EBITDA

Liquidity and Capital Resources

We have historically funded our primary operations through the sale of convertible preferred stock offerings, the proceeds from the Merger and reverse recapitalization including the sale of common stock, and the sale of our products. Since inception we have focused on growth which has required ongoing investment to support scaling of our business, research and development efforts, and day to day operations. We had a cash and cash equivalents balance of $288.6 million as of December 31, 2021. We incurred net profit of $3.9 million, including $65.2 million of non-cash mark-to-market gains, and net loss of $18.0 million for the years ended December 31, 2021 and 2020, respectively.

As noted in the “Recent Developments” section, we completed the Merger with AONE in 2021. At Closing we received $288.8 million in cash, which we expect to provide funding for the build out of the global footprint of our sales network, continued investing in research and development to accelerate product innovation, as well as the potential funding of inorganic growth opportunities.

Our material cash requirements from known contractual and other obligations relate to minimum operating lease obligations as of December 31, 2021 that are as follows: 2022 - $5.5 million; 2023 - $8.3 million; 2024 - $7.5 million; 2025- $7.6 million; 2026 - $7.8 million; and subsequent years - $31.4 million.

Currently we generate negative operating cash flows as we pursue further business growth. Our cash and cash equivalents balance as of December 31, 2021 of $288.6 million is more than sufficient to meet the working capital and capital expenditure needs for the next 12 months following the filing for this Annual Report on Form 10-K. Our future capital requirements will depend on many factors, including our revenue growth rate, the timing and the amount of cash received from customers, the expansion of sales and marketing activities, the timing and extent of spending to support development efforts, expenses associated with our international expansion, the introduction of platform enhancements, and the continuing market adoption of The Digital Forge platform. In the future, we may enter into arrangements to acquire or invest in complementary businesses, products, and technologies. We may be required to seek additional equity or debt financing. In the event that we require additional financing, we may not be able to raise such financing on terms acceptable to us or at all. If we are unable to raise additional capital or generate cash flows necessary to expand our operations and invest in continued innovation, we may not be able to compete successfully, which would harm our business, results of operations, and financial condition.

53

Cash flows

For the years ended December 31, 2021 and 2020

The following table sets forth a summary of Markforged’s cash flows for the periods indicated:

Cash flow from operations

Net cash used in operating activities for the years ended December 31, 2021 and 2020 was $45.7 million and $6.5 million, respectively. Operating cash flows and changes in working capital for comparative periods were as follows:

The changes in working capital for the year ended December 31, 2021 were due to the growth of the business which caused increases in accounts receivable of $10.4 million, inventory of $4.0 million, and prepaid expenses of $2.4 million. Offsetting these asset increases were increases in accounts payable and accrued expenses of $7.3 million and deferred revenue of $0.9 million.

The change in working capital for the year ended December 31, 2020 was primarily attributable to deferred revenue increasing by approximately $5.0 million due to a significant sale in the fourth quarter.

Cash flow from investing activities

Net cash used in investing activities for the years ended December 31, 2021 and 2020 was $3.8 million and $0.5 million, respectively. The increase in cash used of $3.3 million was primarily due to an increase in investments in property and equipment as we continue to grow and invest in machinery and equipment, as well as headcount related costs such as computers and software.

Cash flow from financing activities

Cash provided by financing activities was $279.4 million and $5.9 million for the years ended December 31, 2021 and 2020, respectively. The increase in cash provided of $273.4 million was primarily due to the net cash proceeds related to the Merger. At Closing we received $288.8 million in cash, compared with the $5.0 million proceeds received in April 2020 related to our borrowings under the PPP Loan program.

Critical accounting policies and estimates

Our consolidated financial statements are prepared in accordance with GAAP and require management to make certain estimates and assumptions that impact the reported balances of assets, liabilities, revenue, and expenses. On an ongoing basis, as required by GAAP, we update our estimates and assumptions. The actual results may differ from our estimates if our circumstances and conditions that occur do not align with our assumptions.

Revenue

Our customer contracts include multiple products and services. We are required to perform allocations of the contract value to the products and services deemed to be distinct performance obligations by GAAP in order to recognize revenue at the appropriate time. These allocations are based on a relative standalone selling price methodology, which requires us to determine the standalone selling price for each performance obligation. We utilize selling prices from standalone sales of the product or service when available.

54

However, certain products are not sold on a standalone basis or do not have a sufficient history of standalone sales and we are required to estimate the standalone selling price for the purposes of our allocation. We utilize market information, historical selling practices, and other available information to produce as accurate an estimate as possible. However, to the extent our pricing practices change or estimated selling prices differ from actual standalone sales in the future, the timing of our revenue recognition in contracts with multiple products and services may change.

Inventory

Inventory is stated at average costs subject to impairment when carrying value is in excess of the net realizable value. The costs included materials, labor, and manufacturing overhead related to the acquisition of raw materials and production into finished goods. The net realizable value considers our intent and ability to utilize the inventory prior to perishing as well as the estimated selling price and costs of completion and sale. We regularly review our inventory on hand, product development plans, and sales forecasts to identify carrying values in excess of net realizable value.

Stock-based compensation

Compensation costs related to stock-based compensation for employees is measured using the fair value recognition provisions of Financial Accounting Standards Board Accounting Standards Codification, or ASC, Topic 718 Compensation-Stock Compensation. We recognize compensation costs related to stock options granted based on the estimated fair value of the award on the date of grant. The methodology used to estimate the grant date fair value of stock awards is described below and in Note 3. Summary of Significant Accounting Policies in the accompanying consolidated financial statements.

Common Stock Valuation

One of the inputs to the estimate of grant date fair value of stock awards is the fair value of our common stock. There has been no public market for our equity instruments through the consummation of the Merger; as a result, the estimated fair value of our common shares has historically been determined by our board of directors as of the grant date. The assumptions used to determine the estimated fair value of our common stock are based on numerous objective and subjective factors, combined with management’s judgment, including:

Estimates of the fair value of our common shares consider our most recently available third-party valuations of common shares and have historically coincided with an issuance of convertible preferred shares. We issued our Series D convertible preferred stock on March 13, 2019. The Company subsequently engaged third party valuation specialists to perform valuation estimates of our common stock as of March 13, 2020, September 30, 2020, March 31, 2021, and June 10, 2021.

For the March 13, 2019 valuation, we used the Option Pricing Method (OPM), which models each class of equity securities as a call option with a unique claim on our assets. The OPM treats Markforged common stock and convertible preferred stock as call options on an equity value with exercise prices based on the liquidation preference of our convertible preferred stock. The common stock is modeled as a call option with a claim on the equity value at an exercise price equal to the remaining value immediately after our convertible preferred stock is liquidated. The exclusive reliance on the OPM until March 2020 was appropriate when the range of possible future outcomes was difficult to predict and resulted in a highly speculative forecast.

For the March 13, 2020 valuation, we used a combination of the income and market approaches. Specifically, we used the guideline public company method under the market approach, employing guideline public multiples as an input, and the discounted cash flow method under the income approach. We then weighted the indicated values from each approach to arrive at the fair value of equity as of the valuation date.

55

For the September 30, 2020, March 31, 2021 and June 10, 2021 valuations, we used a probability-weighted expected return method (“PWERM”), which was performed in accordance with the guidance outlined in the American Institute of Certified Public Accountants, or AICPA, Practice Aid, Valuation of Privately-Held Company Equity Securities Issued as Compensation. The PWERM is a scenario-based methodology that estimates the fair value of common stock based upon an analysis of future values for Markforged, assuming various outcomes. The common stock value is based on the probability-weighted present value of expected future investment returns considering each of the possible outcomes available. The future value of the common stock under each outcome is discounted back to the valuation date at an appropriate risk-adjusted discount rate and probability weighted to arrive at an indication of value for the common stock. For the September 30, 2020 valuation, we assigned a 10% probability that a SPAC exit will be completed by September 30, 2021 and a 90% probability of staying private. For the March 31, 2021 and the June 10, 2021 valuation, we assigned a 95% probability of completing the Merger with AONE and a 5% probability of remaining a private entity. We then used the OPM to arrive at a valuation given the assumptions.

We considered all objective and subjective factors that we believed to be relevant for each valuation conducted in accordance with the AICPA’s Practice Aid, including our best estimate of our business condition, prospects, operating performance, and potential future outcomes as of each valuation date. Changes in any or all of these estimates and assumptions or the relationships between those assumptions impact our valuations as of each valuation date and may have a material impact on the valuation of our common stock. Subsequent to closing the Merger discussed in this Annual Report on Form 10-K we will no longer have a need to rely on such complex valuation estimates and will rely on observable market prices to determine the fair value of our common stock.

Common Stock Warrants Liabilities

We assumed 5,374,984 Public Warrants and 3,150,000 Private Placement Warrants upon the Closing, all of which were issued in connection with AONE’s initial public offering and subsequent overallotment and entitle the holder to purchase one share of Common Stock at an exercise price of $11.50 per share. The Warrants became exercisable at the later of 30 days after Closing or 12 months from the closing of AONE’s initial public offering, but can be terminated on the earlier of five years after the Closing, our liquidation, or the redemption date as determined by us.

We evaluated the Warrants and concluded that the Private Placement Warrants do not meet the criteria to be classified within stockholders’ equity. The agreement governing the Common Stock Warrants includes a provision that, if applied could result in a different settlement value for the Private Placement Warrants depending on their holder. Because the holder of an instrument is not an input into the pricing of a fixed-for-fixed option on our ordinary shares, the Private Placement Warrants are not considered to be “indexed to the Company’s own stock.” Such a provision precludes us from classifying the Private Placement Warrants in stockholders’ equity. As the Private Placement Warrants meet the definition of a derivative, we recorded these warrants as liabilities on the consolidated balance sheet at fair value, with subsequent changes in their respective fair values recognized in the consolidated statements of operations and comprehensive income (loss) at each reporting date. The provisions referenced above are not applicable to the Public Warrants which do not have differing settlement provisions based on the warrant holder, and therefore the Public Warrants are not precluded from being considered indexed to our stock and were recognized at fair value in stockholders’ equity at Closing.

Contingent Earnout Liability

The contingent obligations to issue Markforged Earnout Shares in respect of Legacy Markforged common stock and release from lock-up Sponsor Earnout Shares, are accounted for as liability classified instruments in accordance with Accounting Standards Codification ("ASC") Topic 815-40, as the Earnout Triggering Events that determine the number of Sponsor and Markforged Earnout Shares required to be released or issued, as the case may be, include events that are not solely indexed to the fair value of our Common Stock. The liability was recognized at the Closing and is subsequently remeasured at each reporting date with changes in fair value recorded in the consolidated statements of operations and comprehensive income (loss). The valuation of the Markforged Earnout Shares and the surrendered Sponsor shares is based on a Monte Carlo simulation valuation model using a distribution of potential outcomes on a monthly basis over the Earnout period using the most reliable information available.

Markforged Earnout Shares issuable to employees with vested equity awards and Earnout RSUs are considered a separate unit of account from the Markforged Earnout Shares issuable in respect of Legacy Markforged common stock and are accounted for as equity classified stock compensation. The Markforged Earnout Shares issuable to employees with vested equity awards are fully vested upon issuance, thus there is no requisite service period and the value of these shares is recognized as a one-time stock compensation expense for the grant date fair value. Earnout RSUs are contingent upon an employee completing a service vesting condition, and as such, reflect a transaction in which we acquire employee services by offering to issue our shares, the amount of which is based in part on the share price of our Common Stock. Expense related to Earnout RSUs is recognized ratably over the requisite service period for the Earnout RSUs. The fair value of the earnout will increase or decrease uniformly with the current price of our publicly traded common stock.

56

Recent accounting pronouncements

Refer to Note 3 of Markforged’s consolidated financial statements included elsewhere in this Annual Report on Form 10-K for the recent accounting pronouncements adopted and not yet adopted by the Company.

57

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information otherwise required under this item. As of December 31, 2021, we were not subject to any market or interest rate risk. The net proceeds of the Initial Public Offering are invested in U.S. government securities with a maturity of 185 days or less or in money market funds that meet certain conditions under Rule 2a-7 under the Investment Company Act of 1940, as amended, that invest only in direct U.S. government treasury obligations. Due to the short-term nature of these investments, we believe there will be no associated material exposure to interest rate risk.

We have not engaged in any hedging activities since our inception and we do not expect to engage in any hedging activities with respect to the market risk to which we are exposed.

Internal control over financial reporting

In connection with the audit of our financial statements for the years ended December 31, 2021 and 2020, Markforged management identified material weaknesses in our internal controls. See the section titled “Risk Factors, — We have identified material weaknesses in our internal control over financial reporting and may identify additional material weaknesses in the future or fail to maintain effective internal control over financial reporting, which may result in material misstatements of our consolidated financial statements or cause us to fail to meet our periodic reporting obligations.”

JOBS Act accounting election

Markforged Holding Corporation is an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. The JOBS Act permits companies with emerging growth company status to delay adopting new or revised accounting standards until those standards apply to private companies. Markforged Holding Corporation intends to use this extended transition period to enable it to comply with new or revised accounting standards that have different effective dates for public and private companies until the earlier of the date Markforged Holding Corporation (1) is no longer an emerging growth company or (2) affirmatively and irrevocably opts out of the extended transition period provided in the JOBS Act. Accordingly, our financial statements may not be comparable to companies that comply with the new or revised accounting standards as of public company effective dates.

Markforged Holding Corporation intends to rely on the other exemptions and reduced reporting requirements provided by the JOBS Act.

Item 8. Financial Statements and Supplementary Data.

Our consolidated financial statements, together with the report of our independent registered public accounting firm, appear beginning on page F-1 of this Annual Report for the year ended December 31, 2021.

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.

None.

Item 9A. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2021, as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act. Disclosure controls and procedures are designed to ensure that information required to be disclosed by the issuer in the reports that it files or submits under the Securities Exchange Act of 1934, as amended, is recorded, processed, summarized, and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission ("SEC"), and that such information is accumulated and communicated to management, including the principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure. Based upon that evaluation, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were not effective as of December 31, 2021 because of the material weaknesses in internal control over financial reporting described below.

58

Management’s Report on Internal Control over Financial Reporting

This Annual Report on Form 10-K does not include a report of management’s assessment regarding our internal control over financial reporting (as defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act), or an attestation report of our independent registered public accounting firm, as allowed by the SEC for reverse acquisitions between an issuer and a private operating company when it is not possible to conduct an assessment of the private operating company’s internal control over financial reporting in the period between the consummation date of the reverse acquisition and the date of management’s assessment of internal control over financial reporting (pursuant to Section 215.02 of the SEC Division of Corporation Finance’s Regulation S-K Compliance & Disclosure Interpretations).

As discussed elsewhere in this Annual Report on Form 10-K, we completed the Merger Transaction on July 14, 2021, pursuant to which we acquired Markforged, Inc. Prior to the Merger, we were a special purpose acquisition company formed for the purpose of effecting a merger. As a result, previously existing internal controls are no longer applicable or comprehensive enough as of the assessment date as our operations prior to the Merger were insignificant compared to those of the consolidated entity post-Merger. The design of internal control over financial reporting for the Company post-Merger has required and will continue to require significant time and resources from management and other personnel. As a result, management was unable, without incurring unreasonable effort or expense, to conduct an assessment of our internal control over financial reporting as of December 31, 2021.

Material Weaknesses in Internal Control over Financial Reporting

We have identified material weaknesses in our internal control over financial reporting. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. These material weaknesses are as follows:

We did not design and maintain an effective control environment commensurate with our financial reporting requirements. Specifically, we lacked a sufficient complement of resources with (i) an appropriate level of accounting knowledge, experience and training to appropriately analyze, record and disclose accounting matters timely and accurately, and (ii) an appropriate level of knowledge and experience to establish effective processes and controls. Additionally, the lack of a sufficient number of professionals resulted in an inability to consistently establish appropriate authorities and responsibilities in pursuit of our financial reporting objectives, as demonstrated by, among other things, insufficient segregation of duties in our finance and accounting functions. This material weakness contributed to the following additional material weaknesses:

We did not design and maintain effective controls related to the period-end financial reporting process, including designing and maintaining formal accounting policies, procedures and controls to achieve complete, accurate and timely financial accounting, reporting and disclosures. Additionally, we did not design and maintain controls over the preparation and review of account reconciliations and journal entries, including maintaining appropriate segregation of duties.

We did not design and maintain effective controls related to the identification of and accounting for certain non-routine, unusual or complex transactions, including the proper application of U.S. GAAP of such transactions. Specifically, we did not design and maintain controls to timely identify and account for share repurchase transactions, warrant instruments, and performance based stock awards.

These material weaknesses resulted in audit adjustments to the following financial statement line items in the historical Markforged financial statements: operating expense, other expense, interest expense, other assets, other liabilities, additional paid in capital, treasury stock, retained earnings, note receivable—equity, and series D preferred stock. These adjustments were recorded prior to the issuance of the consolidated financial statements as of and for the years ended December 31, 2020 and 2019. Additionally, these material weaknesses resulted in audit adjustments to additional paid in capital and stock based compensation expense for the quarters ended June 30, 2021, September 30, 2021, and December 31, 2021. The material weakness related to accounting for warrant instruments resulted in the restatement of the previously issued financial statements of AONE, the entity we merged with as part of the July 14, 2021 merger agreement related to warrant liabilities and equity. Additionally, these material weaknesses could result in a misstatement of substantially all of our accounts or disclosures that would result in a material misstatement to the annual or interim consolidated financial statements that would not be prevented or detected.

We did not design and maintain effective controls over information technology (“IT”) general controls for information systems that are relevant to the preparation of our financial statements. Specifically, we did not design and maintain (i) program change management controls for financial systems to ensure that information technology program and data changes affecting financial IT applications and underlying accounting records are identified, tested, authorized and implemented appropriately; (ii) user access controls to ensure appropriate segregation of duties and that adequately restrict user and privileged access to financial applications,

59

programs, and data to appropriate Company personnel; (iii) computer operations controls to ensure that critical batch jobs are monitored, privileges are appropriately granted, and data backups are authorized and monitored; and (iv) testing and approval controls for program development to ensure that new software development is aligned with business and IT requirements. These IT deficiencies did not result in any misstatements to the financial statements, however, the deficiencies, when aggregated, could impact our ability to maintain effective segregation of duties, as well as the effectiveness of IT-dependent controls (such as automated controls that address the risk of material misstatement to one or more assertions, along with the IT controls and underlying data that support the effectiveness of system-generated data and reports) that could result in misstatements potentially impacting all financial statement accounts and disclosures that would result in a material misstatement to the annual or interim financial statements that would not be prevented or detected. Accordingly, management has determined these deficiencies in the aggregate constitute a material weakness.

Remediation of Material Weaknesses

We are in process of designing and implementing controls and taking other actions to remediate the material weaknesses described above, including the following:

We have hired additional accounting and IT personnel, including a new chief financial officer hired in April 2021, to bolster our reporting, technical accounting and IT capabilities. Additionally, we are in the process of designing and implementing controls to formalize roles and review responsibilities to align with our team’s skills and experience and designing and implementing controls over segregation of duties.

We are in process of designing and implementing controls related to the period-end financial reporting process, including formal accounting policies, procedures and controls to achieve complete, accurate and timely financial accounting, reporting and disclosures. Additionally, we are in process of designing and implementing controls over the preparation and review of account reconciliations and journal entries.

We are in process of designing and implementing controls to timely identify and account for non-routine, unusual or complex transactions and other technical accounting and financial reporting matters, including controls over the preparation and review of accounting memoranda addressing these matters.

We are in process of designing and implementing IT general controls, including controls over program change management, the review and update of user access rights and privileges, controls over batch jobs and data backups, and program development approvals and testing.

The material weaknesses will not be considered remediated until management completes the design and implementation of the measures described above and the controls operate for a sufficient period of time and management has concluded, through testing, that these controls are effective.

Changes in Internal Control over Financial Reporting

There have been no changes in our internal control over financial reporting during the fiscal quarter ended December 31, 2021 covered by this Annual Report on Form 10-K that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information.

None.

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections.

Not applicable.

60

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 31, 2021.

We have adopted a code of business conduct and ethics for directors, officers, and employees, known as the Code of Business Conduct and Ethics. The Code of Business Conduct and Ethics is available on our website at www.markforged.com under the Governance section of our Investor Relations page. We will promptly disclose on our website (i) the nature of any amendment to the policy that applies to our principal executive officer, principal financial officer, or controller, or persons performing similar functions and (ii) the nature of any waiver, including an implicit waiver, from a provision of the policy that is granted to one of these specified individuals, the name of such person who is granted the waiver and the date of the waiver. Shareholders may request a free copy of the Code of Business Conduct and Ethics from our Compliance Officer, c/o Markforged Holding Corporation, 480 Pleasant Street, Watertown, MA 02472.

Item 11. Executive Compensation.

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 31, 2021.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 31, 2021.

Item 13. Certain Relationships and Related Transactions, and Director Independence.

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 31, 2021.

Item 14. Principal Accounting Fees and Services.

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 31, 2021.

61

PART IV

Item 15. Exhibits, Financial Statement Schedules.

62

* Exhibits filed herein. All exhibits not so designated are incorporated by reference to a prior filing, as indicated.

Item 16. Form 10-K Summary

None.

63

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

POWER OF ATTORNEY AND SIGNATURES

Each person whose individual signature appears below hereby authorizes and appoints Shai Terem, Mark Schwartz and Stephen Karp, and each of them, with full power of substitution and resubstitution and full power to act without the other, as his or her true and lawful attorney-in-fact and agent to act in his or her name, place and stead and to execute in the name and on behalf of each person, individually and in each capacity stated below, and to file any and all amendments to this Annual Report on Form 10-K and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing, ratifying and confirming all that said attorneys-in-fact and agents or any of them or their or his or her substitute or substitutes may lawfully do or cause to be done by virtue thereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Report has been signed below by the following persons on behalf of the Registrant in the capacities and on the dates indicated.

64

INDEX TO FINANCIAL STATEMENTS

F-1

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of Markforged Holding Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Markforged Holding Corporation and its subsidiaries (the “Company”) as of December 31, 2021 and 2020, and the related consolidated statements of operations and comprehensive income (loss), of changes in convertible preferred stock and stockholders’ equity (deficit), and of cash flows for the years then ended, including the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits of these consolidated financial statements in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ PricewaterhouseCoopers LLP

Boston, Massachusetts

March 31, 2022

We have served as the Company’s auditor since 2019.

F-2

MARKFORGED HOLDING CORPORATION

CONSOLIDATED BALANCE SHEETS

As of December 31, 2021 and 2020

(In thousands, except share data)