MAXCYTE, INC. - Annual Report: 2021 (Form 10-K)

Table of Contents

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark one)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from___ to___

Commission file number: 001-40674

MaxCyte, Inc.

(Exact name of registrant as specified in its charter)

​

​

22 Firstfield Road, Suite 110

Gaithersburg, Maryland 20878

(Address of principal executive offices)

Registrant’s telephone number, including area code: (301) 944-1700

Securities registered pursuant to Section 12(b) of the Act:

​

​

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes☐ No☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes☐ No☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☒ No☐

​

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

​

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

​

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

​

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the registrant’s voting and non-voting common equity held by non-affiliates as of June 30, 2021, the last business day of the registrant’s most recently completed second fiscal quarter, based on the closing sale price of the registrant’s common stock of £8.98, as reported by the AIM, a market operated by the London Stock Exchange, on that date, or approximately $12.42 per share based on the last reported exchange rate for British pounds sterling of £1.00 = $1.3829 on June 30, 2021, was approximately $1.0 billion. The registrant’s common shares began trading on the Nasdaq Global Select Market on July 30, 2021.

As of March 17, 2022, the registrant had 101,509,099 shares of common stock, $0.01 par value per share, issued and outstanding.

​

DOCUMENTS INCORPORATED BY REFERENCE

​

Portions of the registrant’s definitive proxy statement relating to the 2022 annual meeting of stockholders, which the registrant intends to file with the Securities and Exchange Commission not later than 120 days after the registrant’s fiscal year ended December 31, 2021, are incorporated by reference into Part III of this Annual Report on Form 10-K.

​

​

​

​

​

Table of Contents

Table of Contents

​

​

​

2

Table of Contents

​

Risk Factors Summary

Our business is subject to numerous risks that you should carefully consider. These risks are more fully described in the section titled “Risk Factors” included in this Annual Report on Form 10-K. A summary of these risks that could materially and adversely affect our business, financial condition, operating results and prospects include the following:

3

Table of Contents

​

4

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements about us and our industry involve substantial risks, uncertainties, and assumptions, including those described in “Risk Factors” and elsewhere in this report. All statements other than statements of historical facts contained in this report, including statements regarding our future results of operations or financial condition, business strategy and plans and objectives of management for future operations, are forward-looking statements. In some cases, you can identify forward-looking statements because they contain words such as “anticipate,” “believe,” “contemplate,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “should,” “target,” “will” or “would” or the negative of these words or other similar terms or expressions. These forward-looking statements include, but are not limited to, statements concerning the following:

5

Table of Contents

You should not rely on forward-looking statements as predictions of future events. We have based the forward-looking statements contained in this Annual Report primarily on our current expectations and projections about future events and trends that we believe may affect our business, financial condition and operating results. The outcome of the events described in these forward-looking statements is subject to risks, uncertainties and other factors described in the section titled “Risk Factors” and elsewhere in this Annual Report. Moreover, we operate in a very competitive and rapidly changing environment. New risks and uncertainties emerge from time to time, and it is not possible for us to predict all risks and uncertainties that could have an impact on the forward-looking statements contained in this report. The results, events and circumstances reflected in the forward-looking statements may not be achieved or occur, and actual results, events or circumstances could differ materially from those described in the forward-looking statements.

In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based on information available to us as of the date of this Annual Report on Form 10-K. And while we believe that information provides a reasonable basis for these statements, that information may be limited or incomplete. Our statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all relevant information. These statements are inherently uncertain, and investors are cautioned not to unduly rely on these statements.

The forward-looking statements made in this Annual Report on Form 10-K relate only to events as of the date on which the statements are made. We undertake no obligation to update any forward-looking statements made in this Annual Report to reflect events or circumstances after the date of this Annual Report or to reflect new information or the occurrence of unanticipated events, except as required by law. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements, and you should not place undue reliance on our forward-looking statements. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures or investments.

You should read this Annual Report and the documents that we file from time to time with the Securities and Exchange Commission, or SEC, with the understanding that our actual future results, levels of activity, performance and events and circumstances may be materially different from what we expect.

In this Annual Report on Form 10-K, unless the context requires otherwise, all references to “we,” “our,” “us,” “MaxCyte” and the “Company” refer to MaxCyte, Inc.

​

6

Table of Contents

PART I

Item 1. Business

Overview

We are a leading commercial cell engineering company focused on providing enabling platform technologies to advance innovative cell-based research and development as well as next-generation cell therapeutic discovery, development and commercialization. Over the past twenty years, we have developed and commercialized our proprietary Flow Electroporation platform, which facilitates complex engineering of a wide variety of cells.

Electroporation is a method of transfection, or the process of deliberately introducing molecules into cells, that involves applying an electric field in order to temporarily increase the permeability of the cell membrane. This precisely controlled increase in permeability allows the intracellular delivery of molecules, such as genetic material and proteins, that would not normally be able to cross the cell membrane as easily.

With increased knowledge of cell complexity and systems biology in the scientific community, researchers have sought to leverage or repurpose cell functions and/or machinery for research or therapeutic purposes. The ability to engineer living cells by introducing foreign molecules, such as gene editing systems and transgenes, has led to a revolution in biological research and resulted in numerous biological discoveries. Living human cells can also be engineered ex vivo, or outside the body, where they are repaired or reprogrammed to fight disease. In this case, the engineered cell itself is the drug.

Cell therapy has emerged as one of the fastest growing and most promising treatment modalities to address a host of human diseases. Over the past few years, the success of multiple U.S. Food and Drug Administration, or FDA, approved cell therapies providing long-lasting amelioration of symptoms or presence of disease has catalyzed tremendous investment—leading to exponential growth in cell-based therapies being evaluated for therapeutic applications. The Alliance for Regenerative Medicine, or ARM, an international advocacy organization, estimated in August 2021 that the regenerative medicine sector, which consists of gene, cell, and tissue-based therapeutic developers raised an aggregate of $14.1 billion in the first half of 2021, which represents the strongest first half on record and is on pace to exceed the $19.9 billion raised in 2020. As of August 2021, ARM estimates that there were more than 2,600 ongoing clinical trials focused on regenerative and advanced medicine, which includes gene therapy, cell-based immuno-oncology, cell therapy and tissue engineering, including 1,320 industry-sponsored trials by 1,200 companies and 965 unique therapies in development, and forecasts that this number will grow to 3,100 by 2026 with 355 programs expected to be in Phase 3 development.

Our ExPERT platform, which is based on our proprietary Flow Electroporation technology, has been designed to address this rapidly expanding cell therapy market and can be utilized across the continuum of the high-growth cell therapy sector, from discovery and development through commercialization of next-generation, cell-based medicines. The ExPERT family of products includes three instruments, which we call the ATx, STx and GTx, respectively, as well as a portfolio of proprietary related disposables and consumables (as well as the VLx instrument for very large-scale cell engineering made available for sale in December 2021). These include processing assemblies, or PAs, designed for use with our instruments, as well as accessories supporting PAs such as electroporation buffer solution and software protocols. We have garnered meaningful expertise in cell engineering via our internal research and development efforts as well as our customer-focused commercial approach, which includes a growing application scientist team. The platform is also supported by a robust intellectual property portfolio with more than 130 granted U.S. and foreign patents and more than 60 pending patent applications worldwide.

From leading commercial cell therapy drug developers and top biopharmaceutical companies to top academic and government research institutions, including the U.S. National Institutes of Health, or NIH, our customers have extensively validated our technology. We believe the features and performance of our platform have led to sustained customer engagement. Our existing customer base ranges from large biopharmaceutical companies, including all of the top 10, and

7

Table of Contents

20 of the top 25, pharmaceutical companies based on 2021 global revenue, to hundreds of biotechnology companies and academic centers focused on translational research.

Our Competitive Strengths

We believe our industry leadership position and continued growth will be driven by the following competitive strengths:

In addition to the high performance and flexibility of the ExPERT platform, we believe our partnership model further reduces clinical risk and development timelines for our cell therapy partners. By entering into an SPL with us, for example, our partners gain access to our FDA Master File to support their IND-enabling studies and potentially shorten clinical development. Our FDA Master File, which is a submission to the FDA with confidential detailed information about our products, methods, processes and data, was originally established in 2002 and has been continuously updated as platform improvements are implemented to support different applications and cell types. The FDA Master File and equivalent Technical Files in other countries can be referenced by our partners to support their own regulatory submissions with the goal of accelerating regulatory submissions processes for our partners. To date, our FDA Master File and Technical Files have been referenced by our customers in over 40 clinical trials.

8

Table of Contents

Our Technology Platform

The foundation of our technology is our proprietary and patented Flow Electroporation platform, which we have developed and optimized for more than 20 years. Electroporation, or electro-permeabilization, leverages the fundamental properties of cell membranes, the ability to create reversible permeability in the presence of an electric charge, as a universal method to introduce foreign molecules, or transfect, eukaryotic cells, which are cells with a cell membrane and neucleus. Electroporation can be applied to almost any eukaryotic cell type to deliver a broad range of molecules, including DNA, mRNA, siRNA and proteins. Our proprietary Flow Electroporation platform is fully scalable and can support small-scale research and development through large-scale cell engineering for development of commercial therapeutics.

​

Our technology platform is marketed under the ExPERT brand. The value of our ExPERT brand starts with Efficiency—with high delivery Efficiency, users can achieve Potency, with high Potency, users improve their chances of therapeutic Efficacy, and if this can be repeated, Reproducibly from patient to patient, users have a successful Therapy. By delivering high efficiency at any scale, the ExPERT platform is designed to improve our customer’s ability to achieve the required therapeutic index, enabling accelerated, cost-efficient translation of complex cellular therapies from research to the clinic.

Our ExPERT platform consists of three instruments, the ATx, STx and GTx, which use a broad range of PAs, or disposables, of different volumes to enable scalable electroporation from tens of thousands to billions of cells to

9

Table of Contents

facilitate the translation of complex cellular therapies from concept to the clinic, in support of the intended therapeutic commercialization.

ConceptDoEOptimizationVerification

Phase IPivotalValidation

ApprovalOn-Market

Disposables (referred to as processing assemblies) facilitate scale up on same GMP platform

Our ExPERT family of instruments and disposables support scale-up for cell therapy

​

Overview of our ExPERT Platform

Our Flow Electroporation Technology was designed to meet the stringent demands of clinical use—namely, the ability to safely and reproducibly modify a broad range of primary human cells with high efficiency, low cytotoxicity, and at the scale required to enable the treatment of patients across a diverse range of diseases.

We believe the current ExPERT instrument family represents the next generation of our clinically validated, electroporation technology for complex and scalable cellular engineering. By delivering high transfection efficiency with enhanced functionality and ease of use, the ExPERT platform delivers the high-end performance that we believe is essential to enabling the next wave of biological and cellular therapeutics. The combination of the ExPERT instruments, associated disposables and universal electroporation buffer provides researchers, production scientists, and cGMP facilities with a solution to transfect cells with high efficiency, viability and consistency, which are the three attributes that are consistently ranked by our customers as the top requirements when choosing a cellular or gene engineering platform for clinical use. We believe our ExPERT platform is seen as a critical enabling technology by many of the leading cell therapy companies, helping them to achieve their program goals and milestones expeditiously. Our instruments are sold or licensed for research or clinical use, while the associated disposables and electroporation buffer are sold to support pre-clinical research and development work and are compatible for integration into cGMP manufacturing environments.

We believe that the following four components of our platform have allowed us to successfully address the increasing complexity of cellular engineering approaches in the industry:

In addition, we have implemented a global scientific and regulatory support strategy for our customers that is designed to accelerate clinical development and streamline the regulatory submission process, thereby potentially saving time and reducing cost and development risk.

We believe our ExPERT platform offers a compelling value proposition to our academic and biopharmaceutical customers due to: (i) the ability to use our technology to deliver almost any molecule into almost any cell type, including hard-to-transfect human primary cells, while maintaining high cell viability and function; (ii) the capacity to introduce larger and more diverse and multiple payloads compared to other intracellular delivery technologies, such as viral vectors; and (iii) the flexibility to scale up from research to current good manufacturing practices, or cGMP, manufacturing on a single platform—enabling the engineering of cells ranging from tens of thousands of cells to tens of billions of cells in a single transfection run in 30 minutes or less.

We believe our ExPERT intracellular delivery platform provides value across numerous applications in the life sciences market, including research, discovery, development, and manufacturing of next-generation, cell-based

10

Table of Contents

therapeutics, as well as in biomanufacturing, such as transient protein production for drug discovery and manufacturing of other proteins, including biological therapeutics, viral vectors and vaccines, and small molecule drug discovery.

Our ExPERT technology platform is being used in the clinic to support the development of next-generation cell therapy approaches to treat human disease. Following the successful clinical development leading to FDA approvals of CAR-T cell therapies in blood-based cancers, developers have focused on improving efficacy, lowering the cost of manufacturing and/or expanding engineered cell therapies into new indications, such as solid tumors. To address these goals, the ex vivo cell therapy industry has trended towards developing more complex therapies that require sophisticated engineering and gene manipulation as well as the use of different starting cell types.

In addition, we are committed to continued research and development investments in technology and scientific innovation to maintain our market leadership position.

Our Industry Background

As the cell therapy market continues to evolve, more complex approaches are being deployed to improve efficacy, reduce time to patient and expand the application of cell therapy to additional indications. The use of viral vectors carries several challenges, however, especially given the increase in complexity of these “next-generation” ex vivo cell therapy approaches, such as:

Novel intracellular delivery approaches are needed to support the increased complexity of the burgeoning cell therapy pipeline. Characteristics include reducing immunogenicity risk of viral vectors, the need to drive high efficiency of multi-molecule delivery while maintaining high cell viability and potency, reducing the risk of potential genotoxicity of multiplex editing (potential for translocations), the need to deliver a large number of molecules at scale, the ability to deliver to a large number of cell types in a time efficient matter, and the need to manufacture in a cGMP environment—all at a manageable cost.

The challenges of viral delivery methods and increased complexity of next-generation cell therapies has driven increased adoption of non-viral delivery technologies, such as electroporation. We believe our ExPERT technology is well positioned as a non-viral delivery platform in the cell therapy market. Originally developed in 1999 for the cell therapy market, we have systematically designed and improved the platform to deliver any molecule, into any cell at any scale, with high efficiency and under cGMP conditions. Our ExPERT platform is now the delivery backbone for a number of next-generation cell therapy programs that are in the clinic.

11

Table of Contents

Our Agreements with Customers

We have a diverse portfolio of clinical partners and licensees that mirror the overall next-generation engineered ex vivo cell therapies. While difficult to predict given uncertainty around regulatory approvals and clinical risk, according to Evaluate Pharma, a provider of commercial intelligence and predictive analytics to the pharmaceutical industry, the first next-generation ex vivo cell therapies using non-viral approaches could be approved in the United States as early as 2023.

Our platform’s ability to engineer a diversity of cell types (including CAR-T, chimeric antigen receptor Natural Killer cells, or CAR-NK/NK, T cell receptor, or TCR, and stem cells) and cell sources (autologous and allogeneic) enhances our opportunity by potentially providing for SPL revenues regardless of which approaches advance in the coming years. Additionally, our instruments and platform are well validated, having been used in over 40 clinical trials to date and having been involved in the development of drugs to treat a variety of indications spanning from hematological malignancies to solid tumors to inherited genetic disorders. We believe that the increasing number of publications highlighting the performance of our platform compared to other electroporation, transfection and transduction approaches will continue to drive acceptance of our products in the cellular engineering market segments.

In addition to sales of our instruments, as part of our business model we enter into the following types of instrument license agreements with our customers:

Research Licenses

Research licenses are agreements we have entered into with customers (which could be academic institutions or commercial entities), which provide access to the use of our instruments for pre-clinical research-only purposes, without the rights or ability to produce material for use in the clinic. Research licenses provide the customer with the ability to use the platform for research in exchange for a non-refundable, annual lease payment of typically $150,000 per instrument per year, or in certain circumstances under a sale of an instrument to a cell therapy user. We have entered into many research licenses to-date, either as (i) stand-alone research license agreements, (ii) research and clinical license agreements that do not have associated commercial rights or (iii) under an SPL, which allows a customer to use the instrument for clinical development and potential commercial sale of a therapeutic product. Research licenses under a stand-alone research license agreement (as well as instruments purchased for research use) could represent opportunities for future SPLs.

Clinical Licenses

Clinical licenses are agreements with academic institutions or commercial entities that provide access to the use of our instruments in the clinical evaluation and development of a therapeutic product intended for human use. In a clinical license, we retain title to the instrument and provide the customer with the ability to use the platform for production of clinical material for human clinical use, as well as access to our application scientist team, all in exchange for an annual lease payment that typically approximates $250,000 per instrument per year for commercial customers. Academic clinical licenses can represent opportunities for future SPLs to the extent that commercial entities seek and obtain rights to such programs from the academic institution.

Strategic Platform Licenses (SPLs)

Given our value proposition in non-viral delivery, we have established strategic relationships in the form of SPLs with a growing number of leading cell therapy developers as they work to bring next-generation cell therapies into and through the clinic and advance those candidates to potential commercialization.

12

Table of Contents

Under these SPLs and other license agreements with our customers, we retain title to the licensed instrument and associated intellectual property, and in exchange for an annual license fee per instrument, we provide our customers with non-exclusive access, for a defined field of use to our:

In return, these SPLs provide us with the ability to secure downstream program-related pre-commercial milestones and, in most cases, commercial sales-based payments. In addition, from our SPL customers, we receive both annual research and clinical license fees as well as payments from sales of our proprietary disposables as recurring revenue streams. Given growth in the cell therapy pipeline and increased investment in the space, we estimate that the number of potential SPLs for us will continue to grow significantly, based on our estimates of growth in the cell therapy pipeline, growth in the number of therapeutic delivery entrants into the market and ongoing shift to non-viral delivery.

Our customer relationships may evolve to an SPL after the customer’s drug candidate optimization and verification process nears completion and the clinical process development stage begins. Specifically, if a customer wishes to use our products in the clinical phase of process development, they will need to enter into an SPL, as a customer must obtain clinical rights to perform clinical process development, including for engineering runs. Customer discussion for an SPL can take place any time during our engagement.

Our SPL customers typically pay an annual license fee per instrument per year for a research license (for pre-clinical use) or per instrument per year for a clinical license (for clinical or commercial use) or in certain circumstances purchase an instrument for research use. Partners also purchase associated single-use disposables and consumables as needed. Our SPL partners also commit to pay pre-commercial milestone payments for each therapeutic licensed under the agreement and produced using our platform, as they achieve key pre-commercial clinical development events (including for example, IND filing, dosing of an agreed number of patients in a Phase 1 clinical trial, initiating a pivotal clinical trial, and BLA approvals in specified regions). Almost all of our SPLs also include a commitment to pay us post-approval sales-based payments for commercialized therapeutics.

We view our ability to sign SPLs as a key measure of our success in partnering with leading therapeutic developers in the clinic and supports the high performance of our platform.

13

Table of Contents

The following graphic is an example of typical single-product revenues from a representative SPL:

Our SPLs and research and clinical licenses may be terminated at the option of our customers at any time. Annual instrument lease fees are non-refundable and customers may not use our instruments or process assemblies after terminating their agreement with us. We retain title to the leased instrument in each of our licenses. Upon contract termination, our customers would be responsible for any further clinical studies or data development that regulators may require to allow a change in their cell engineering methodology. To date, none of our SPL licensees has ever terminated their contract with us.

We have entered into 16 SPLs with commercial cell therapy developers since January 1, 2017, all of which remain active as of the date of this report.

Of the over 95 potential program allowed under our current SPLs, more than 15% are in the clinic, meaning they have at least an FDA-cleared investigational new drug application, or IND. An IND is a request for authorization from the FDA to administer an investigational new drug to humans. An IND must become effective before human clinical trials may begin. The IND automatically becomes effective 30 days after receipt by the FDA, unless the FDA, within the 30-day time period, raises safety concerns or questions about the proposed clinical trial. Clinical trials then involve the administration of the investigational product to human subjects under the supervision of qualified investigators and are conducted under protocols detailing, among other things, the objectives of the study, the parameters to be used in monitoring safety and the effectiveness criteria to be evaluated.

Our 16 SPLs have the potential to generate over $1.25 billion in pre-commercial milestone payments if all of the licensed programs were to achieve regulatory approvals. In addition, under the SPLs, we typically have the potential to receive significant, sales-based commercial payments for approved products. However, clinical development involves a lengthy and expensive process with uncertain outcomes, including the results of pre-clinical research, as well as product

14

Table of Contents

safety and efficacy, and therefore our customers may not begin or complete clinical development, or may never receive FDA or other regulatory approval for, all product candidates covered by their SPL agreements with us, in which case we will not receive the full potential pre-commercial milestone payments or the sales-based commercial payments or royalties contemplated by our agreements.

Our Products

The ExPERT instrument family was designed to provide a single unifying technology that can be used from concept to clinic, with both the research and clinical versions of the instrument incorporating the same underlying technology and protocols. Our customers have a choice of three different instrument versions that are standardized on the same technology to deliver the same high performance—the ATx, STx and GTx (as well as the VLx instrument for very large-scale cell engineering which became available for sale in December 2021). Customers can start with the lower to medium scale research instrument (ATx) and then scale to the clinical version (GTx), without the need for re-optimization and re-validation. The STx provides the same scale as the GTx, but is used for drug discovery applications, not for human therapeutic use, and is not covered by our FDA Master File or our Technical Files.

We believe these systems will also be supportive of the commercial marketing of our partners’ therapeutic products which we enable. By allowing our customers to perform their research and process optimization on a research platform and seamlessly scale to a clinically validated, cGMP environment and 21 CFR Part 11 compatible clinical platforms, significant time and cost savings can be realized.

All of our instruments have been designed to provide customers with the key features required for a scalable high-performance transfection solution. Each of our ExPERT instruments are benchtop with the same small footprint and have integrated touch screens with an intuitive Graphical User Interface, or GUI, designed for simple training and operation. To support use in the cGMP suite for clinical manufacturing, our GTx ExPERT software is network capable to enable upload of electronic batch records to a local shared drive and has a software intermediary to facilitate integration and automated data transfer to cloud-based data management solutions. We have integrated hardware and software design solutions, manufactured under cGMP, that are tailored for use in cGMP manufacturing of clinical products for advanced cellular therapies.

15

Table of Contents

The following chart summarizes the features of the three ExPERT instruments:

16

Table of Contents

ExPERT ATx: Research focused, static electroporation for small to medium scale transfection

​

​

ExPERT STx: Flow Electroporation for protein production and drug development

​

​

17

Table of Contents

ExPERT GTx: Flow Electroporation for large scale transfection in therapeutic applications

​

​

ExPERT VLx: Designed for very large volume cell-engineering

​

​

Disposables—Processing Assemblies (PAs)

Our range of disposable PAs is an important differentiator for us. We are not aware of any other company with the breadth and diversity of volume ranges and designs to enable high efficiency electroporation in flow, single-well and multi-well formats, for use in both the research and clinical settings. We view the PA design as one of the key contributors to the high efficiency and viability of the ExPERT platform.

We have designed a range of PAs that are specially designed to process and electroporate the user’s chosen quantity of cells. Each PA contains two electrodes, between which a medical-grade gasket is sandwiched that has a unique well design consistent with the processing volume required and to allow maximum retrieval of cells. We have designed a unique range of PAs capable of electroporating cell volumes from small to large scale, in single and multi-well formats, for both research and clinical use. Cells are placed into the sample bag in large scale PAs or into the well or wells in

18

Table of Contents

small scale PAs and the PA is then connected to the instrument for processing. The instrument touch screen allows the operator to select the desired cell protocol that encodes the electroporation parameters, select the type of PA to be used and enter any sample specific information. Once the sample information has been entered, the operator will touch the “Start Processing” icon on the user interface and the sample will be rapidly processed. Larger volumes of cells are accommodated by larger capacity PAs and a set of simple software commands through the intuitive GUI.

Our ExPERT system uses two PA designs — a static cuvette used for smaller cell volume requirements (from 75,000 cells up to 200 million cells) and a cartridge that is used for both static and Flow Electroporation for larger cell volumes (700 million up to tens of billions of cells). The Flow Electroporation PA (CL-2) allows for processing of cellular volumes ranging from 10 mL to 100 mL and up to tens of billions of cells. The CL-2 consists of bags and associated tubing, made from medical grade materials, that are connected to the electroporation cartridge. Users will transfer their cells and loading molecules to the sample bag, and the pump on either the GTx or STx instrument pumps a fixed volume of cells into the cartridge chamber where they are electroporated. Once the electroporation is complete, the cells are pumped to the collection bag and the chamber is filled with the next volume of cells for electroporation. This process is repeated until the entire sample volume is processed. The maximum volume of 100 mL of cells can be processed in approximately 15–20 minutes.

Our two ExPERT PA designs are shown in the pictures below:

We have conducted extensive end-user research over the last several years to continue to improve the design of the PAs and the range of products available. As a result, we launched the ExPERT cuvette in 2020 based on customer feedback, which incorporated a new design to improve handling and ease of use. In 2021, we expanded the availability of the ExPERT PA design, continuing to roll it out across the entire range of cuvettes. Conversion of the portfolio will be completed in 2022. We also expanded our portfolio of multi-well cuvettes, which reduce manual handling and improve productivity in the lab, with the launch of our R-50x8. The R-50x8 is an 8-well cuvette capable of processing up to 225,000 cells in each well. By enabling eight samples to be processed in the same cuvette, a more efficient process can be achieved by users.

19

Table of Contents

The following matrix shows our full line of currently available PAs and their respective specifications and features, including the ExPERT instruments with which they can be used:

We are committed to continuing to strategically invest in improvements in the PA design and range of products to ensure that customers have solutions that address all of their volume and use requirements, in both research and clinical settings, including current development of advancements for PA(s) that support the VLx.

Supporting Products

Our proprietary electroporation buffer, a balanced salt solution that protects cells during transfection, is formulated for use with all our instrument platforms and PAs. This consumable is used for all cell types, eliminating the need to change buffers as users switch protocols, cell types or scale up. The buffer is made in a cGMP facility, is fully chemically defined and is free of human or animal components, and is tested to meet technical, sterility and endotoxin specifications. This buffer formulation is a key contributing factor, in combination with instrument and PA design features, to the flexibility, high efficiency and viability that can be achieved by customers across the broad range of cell types processed using our platform.

Sales and Marketing

We follow a direct sales model in North America, the United Kingdom, and Europe, while also selling through third-party distributors in Asia and some regions of Europe. As of December 31, 2021, we have over 20 field sales and application scientists located in the United States, the United Kingdom, and several regions in Europe and Asia. Since the commercial launch of our first Flow Electroporation instrument, the installed base of our instruments has grown to more than 500 instruments globally.

Our sales force and field application scientists and international partners inform our current and potential customers of current product offerings, new target applications and advances in our technologies and products. As our primary point of contact in the marketplace, our field teams focus on delivering a consistent marketing message and high level of customer support, while also working to help us better understand the evolving market and customer needs. We intend to expand our sales, support, and marketing efforts in regions such as the Asia-Pacific region. We currently use distributors

20

Table of Contents

in countries in these regions, such as in China and Japan, and continuously assess the need for direct sales and local support personnel to supplement our distributors’ resources. As we expand into a new geography, we generally rely initially on third-party distributors until we are able to recruit a direct sales force, field application scientists and business development resources in the country or region.

Our business model is focused on identifying new applications in cell engineering to enable our customers to develop better medicines and maximize use across our customers’ value chains. This is enabled through customer partnerships that allows us to further understand the critical applications for our technology and inform our future developments and market expansion.

Research and Development

Investment in research and development is at the core of our business strategy. Members of our research and development team specialize in many functional areas including molecular biology, cellular biology, physics, gene editing, cell culture, protein manufacturing, mechanical engineering, cell handling processes, electroporation algorithm development and customer technical support.

Our research and development teams are aligned into two teams, applications and instrumentation. The application team is responsible for developing data on key applications, including improving approaches to cell handling and cell culture; designing, developing and enhancing electroporation protocols; developing and enhancing cell engineering applications, and performing product testing and quality assurance activities. The instrumentation engineering team focuses on developing and improving electroporation instruments and PA disposables to meet our partners’ wide range of needs from research to commercialization in a GMP environment. The research and development functional teams work together as a core team, following a stage-gate process to develop, qualify and launch new products to market.

Other research and development activities include customer technical support such as lab cell processing techniques, instrumentation training and application support. Most of our research and development operations are conducted in our Maryland facility.

We have made substantial investments in product and technology development since our inception. Research and development expenses totaled $15.4 million, $17.7 million and $17.6 million in the years ended December 31, 2021, 2020 and 2019, respectively.

Although our CARMA pre-clinical and clinical development was concluded in the first half of 2021, we expect our research and development expenses outside of CARMA to increase significantly for the foreseeable future as we develop data supporting the use of our products in various applications and continue to enhance our existing products as well as develop new products for our current and new markets.

Manufacturing and Supply

We design our single use PA disposables and conduct final functional testing in our Maryland facility. In addition, we design, develop and manufacture the ExPERT instruments in-house. Our in-house manufacturing and design function is certified as ISO 9001 compliant and our manufacturing facility and controlled-access shipping, receiving and storage spaces are located at our current headquarters in Maryland. We intend to relocate our manufacturing to a significantly larger space in a new facility during 2022.

Instruments

Our range of ExPERT instruments are manufactured, tested and shipped from our Maryland facility under cGMP. Several custom components of our ExPERT instruments are fabricated by third-party suppliers. The assembly of technology-sensitive components and the final assembly is completed in-house. Presently, our Maryland manufacturing

21

Table of Contents

facility can support the production of ExPERT instruments in excess of current demand, and we will continue to obtain the space and staffing necessary to meet customer demand for the foreseeable future.

Processing Assemblies

Our family of ExPERT instruments incorporate a broad range of proprietary single use PAs that are specially designed to meet the needs of our customers for cell volume, single- or multi-well configuration, and static or flow processing. These PAs are only available from us and are designed for use only with our instruments and, our range of PAs are designed, developed, tested and shipped from our Maryland facility. We currently outsource manufacturing of components and final clean-room disposables assembly to third parties. We plan to move the cleanroom assembly activities in-house in order to enhance operational control over quality, expand capacity, enable automation implementation and improve other areas of operations. In addition, in-house manufacturing is expected to allow research and development to more rapidly develop new products and enhancements when manufacturing and research and development are in the same facility. We are currently constructing a new facility for occupancy in mid-2022 that will include new cleanroom space for assembly of processing assemblies. Staffing and manufacturing process development for in-house PA manufacturing began in early 2022. We will seek to establish commercial scale PA production capacity by the end of 2022 and full initial capacity during 2023.

Supply

For both instrument and PA manufacturing, we regularly assess our supply chain to ensure availability of components, our ability to respond to customer demand for our products and to qualify multiple suppliers. We have relationships with several custom parts manufacturers and electronics suppliers that can provide components for our instruments, including components currently provided by a single source. Approximately 33% of our inventory held at December 31, 2021, was purchased from one supplier. Single source suppliers are chosen for their business stability and scalability to minimize risk. If a single source supplier has a part or process that is time-consuming to transfer to another supplier, our approach is to hold enough inventory of that part to allow adequate time for technical transfer and qualification wherever possible. Our ongoing strategy is to maintain adequate levels of inventories at all times and to qualify at least two suppliers for critical quality components, and we plan to continue the diversification of our supply chain as we scale. This inventory strategy was designed to minimize supply chain risk and as a result we are currently able to ship on demand and to date have never had a backorder for a product.

Competition

The life sciences market is highly competitive and dynamic, reflecting rapid technological evolution and continually evolving customer requirements. There are other companies, both established and early-stage, that have or are developing electroporation and other non-viral delivery technologies that could be applicable to both bioprocessing and cell engineering. These companies include Lonza Group AG, Thermo Fisher Scientific Inc., Miltenyi Biotec, Bio-Rad Laboratories, Inc. and Harvard Biosciences Inc. (BTX), as well as several other smaller companies, including spinouts from academic labs.

Some of these companies may have substantially greater financial and other resources than us, including larger research and development staff or more established sales forces. Other competitors are in the process of developing novel technologies for the life sciences market which may lead to products that rival or replace our products.

For further discussion of the risks we face as a result of competition, see “Risk Factors—Risks Related to Our Business and Growth Strategy—We may be unable to compete successfully against our existing or future competitors.”

Intellectual Property

Our intellectual property strategy has been, and still is, to obtain patent protection in relevant jurisdictions over our instruments, methods utilizing our instruments, as well as design patents over the ExPERT system. As part of this

22

Table of Contents

strategy, we have focused on obtaining protection for our non-viral delivery platform to the extent possible, particularly in the United States and other key jurisdictions of commercial value. As of February 11, 2022, we have more than 130 granted U.S. and foreign patents, including in foreign jurisdictions such as Australia, Canada, Japan, China, South Korea and certain countries in Europe, as well as over 60 pending patent applications worldwide. The main focus of our patent coverage is to protect our Flow Electroporation, processing chambers/disposables, control and process elements, and methods/applications of using our non-viral delivery platform. Our patent portfolio provides protection over our instruments and related methods through at least 2028 and over our electroporation applications and methods through 2034. We are also working to secure design protection of the ExPERT system, which has the potential to provide protection through at least 2036.

In addition to our granted patents and filed applications, we maintain and protect a number of different trade secrets related to our cell processing technology and other core technology areas, such as improvements made to protocols, pulsing patterns, proprietary buffer and formulations developed by us. Our years of accumulated know-how and the technical expertise of our employees provide us with a competitive advantage. We use our know-how and technical expertise to optimize and update our proprietary methods and protocols, such as cell handling and preparation techniques unique to different cells and target molecules, which we confidentially share with our customers.

We maintain the confidentiality of our trade secrets, know-how and proprietary methods and protocols to protect our intellectual property from competitors. One key element of this protection is our FDA Master File and Technical Files described in more detail below, which allow us to submit to the regulatory authorities confidential detailed information about our ExPERT system and disposables. The relevant submission can be referenced by our customers or licensees to support their own regulatory filings without the need for us to disclose the confidential information contained in the FDA Master File and Technical Files.

We also seek to protect our brand through procurement of trademark rights. As of March 14, 2022, we owned 15 registered trademarks in the United States, 146 registered foreign trademarks, 15 pending U.S. trademark applications, and more than 58 pending foreign trademark applications. Our registered trademarks and pending trademark applications include trademarks for MaxCyte, CARMA, a stylized version of ExPERT and our logo. In order to supplement protection of our brand, we have also registered several internet domain names.

Government Regulation

The FDA and similar governmental authorities regulate, among other things, the research, development, testing, manufacturing, clearance, approval, labeling, storage, recordkeeping, advertising, promotion, marketing, distribution, post-market monitoring and reporting, as well as import and export of technologies including biological drug products.

Our biopharmaceutical and life sciences customers are subject to extensive regulations by the FDA and equivalent regulatory authorities in other countries, regarding the conduct of pre-clinical studies and clinical trials, in the manufacture of product candidates and products for use in humans (i.e., “Good Manufacturing Practice” laws and regulations) and the marketing authorization and commercialization of biological drug products.

The activities of sponsors, applicants and manufacturers are subject to regulation of those jurisdictions where the research or manufacturing occur, and also jurisdictions for which applications are planned or have been made and the product is intended to be marketed.

Although we are not engaged in directly regulated activities, our customers will generally assess our products for sufficiency in meeting their regulatory needs, and may impose rigorous quality or other regulatory compliance requirements on us as their supplier through supplier qualification processes and customer contracts.

We have established a quality management system (under ISO 9001:2015 standards) which is designed to respond to customer expectations and needs and support customer adherence to applicable regulatory requirements. The

23

Table of Contents

technologies we offer for potential use by customers in a cGMP environment are produced under this ISO 9001:2015 quality management system.

Master Files and Technical Files to Support Customer Regulatory Submissions

Our core business is focused on developing our proprietary and patented electroporation technology platform, which is used by our customers in research and development applications as well as for manufacture of commercial cell therapies. In order to support our customers’ use of our platform, we have voluntarily submitted a Master File to the FDA, Center for Biologics Evaluation and Research and Master Files or Technical Files to comparable regulatory authorities in other jurisdictions, including Canada, Japan, the United Kingdom and Austria, and provide nonexclusive Letters of Authorization to the Master or Technical Files under contractual agreements with our customers. We have also discussed the potential to submit a Master File with the Therapeutic Goods Administration in Australia. In this way, the regulatory body may review information on our platform in the context of its utilization by our partners in regulated products, for example, as described in our customers’ Investigational New Drug (IND) applications. We continuously update the Master and Technical Files in order to support the regulatory activities of our customers. The FDA and regulators in other countries allow Master and Technical Files, but they do not approve them. Rather, they review them in the context of evaluating the submissions by our customers wherein our files are referenced.

U.S. Healthcare Laws and Reform

In the United States, there are federal and state healthcare laws that constrain the business or financial arrangements and relationships through which our customers who use our platform and we, if we develop a product, research, sell, market and distribute products. Such laws include federal and state anti-kickback laws, false claims laws, transparency laws and health information privacy and security laws. Violations of these laws can lead to significant administrative, civil and criminal penalties, including sanctions, damages, disgorgement, monetary fines, possible exclusion from participation in government healthcare programs such as Medicare and Medicaid, imprisonment, additional reporting requirements and/or oversight obligations, contractual damages, reputational harm, diminished profits and future earnings and curtailment or restructuring of operations.

Additionally, in the United States and some foreign jurisdictions there have been, and continue to be, several legislative and regulatory changes and proposed reforms of the healthcare system in an effort to contain costs, improve quality, and expand access to care, including the proposed modification to some of the aforementioned laws. In the United States, there have been and continue to be a number of healthcare-related legislative initiatives that have significantly affected the healthcare industry. These reform initiatives may, among other things, result in modifications to the aforementioned laws and/or the implementation of new laws affecting the healthcare industry. Similarly, a significant trend in the healthcare industry is cost containment. Third-party payors have attempted to control costs by limiting coverage and the amount of reimbursement for particular medications. Our ability to commercialize any of our products successfully, and our customers and collaborators’ ability to commercialize their products successfully, will depend in part on the extent to which coverage and adequate reimbursement for these products and will be available from third-party payors. As such, cost containment reform efforts may result in an adverse effect on our operations.

The Foreign Corrupt Practices Act

The Foreign Corrupt Practices Act, or FCPA, prohibits any U.S. individual or business from paying, offering, or authorizing payment or offering of anything of value, directly or indirectly, to any foreign official, political party or candidate for the purpose of influencing any act or decision of the foreign entity in order to assist the individual or business in obtaining or retaining business. The FCPA also obligates companies whose securities are listed in the United States to comply with accounting provisions requiring the company to maintain books and records that accurately and fairly reflect all transactions of the corporation, including international subsidiaries, and to devise and maintain an adequate system of internal accounting controls for international operations.

24

Table of Contents

Data Privacy and Security Laws and Regulations

In the ordinary course of business, we may process personal data (including, without limitation, clinical trial data and other data concerning health). Accordingly, we may be subject to numerous data privacy and security obligations, including federal, state, local and foreign laws, regulations, guidance, and industry standards related to data privacy, security, and protection. These frameworks are evolving and may impose potentially conflicting obligations. Such obligations may include, without limitation, the Federal Trade Commission Act, the Telephone Consumer Protection Act of 1991, the Controlling the Assault of Non-Solicited Pornography And Marketing Act of 2003, the California Consumer Privacy Act of 2018 (“CCPA”), the European Union’s General Data Protection Regulation 2016/679 (“EU GDPR”), the EU GDPR as it forms part of United Kingdom (“UK”) law by virtue of section 3 of the European Union (Withdrawal) Act 2018 (“UK GDPR”), the ePrivacy Directive, and the Payment Card Industry Data Security Standard (“PCI DSS”). In addition, several states within the United States have enacted or proposed data privacy laws. For example, Virginia passed the Consumer Data Protection Act, and Colorado passed the Colorado Privacy Act.

The EU GDPR and CCPA are examples of the increasingly stringent and evolving regulatory frameworks related to personal data processing may increase our compliance obligations and exposure for any noncompliance. European data privacy and security laws (including the EU GDPR and UK GDPR) impose significant and complex compliance obligations on entities that are subject to those laws. For example, in the European Economic Area, or EEA, the processing of personal data is principally governed by the provisions of the EU GDPR. The EU GDPR applies to any processing operations carried out in the context of an establishment in the EEA as well as any processing operations relating to the offering of goods or services to individuals in the EEA and/or the monitoring of their behavior in the EEA and to companies established outside the EEA that process personal data in connection with the offering of goods or services to data subjects in the EEA or the monitoring of the behavior of data subjects in the EEA.

The GDPR enhances data protection obligations for controllers of personal data (such as clinical trial sponsors). These obligations may include limiting personal data processing to only what is necessary for specified, explicit, and legitimate purposes; requiring a legal basis for personal data processing; limiting the collection and retention of personal data; increasing rights for data subjects; formalizing a heightened and codified standard of data subject consents; requiring the implementation and maintenance of technical and organizational safeguards for personal data; mandating notice of certain personal data breaches to the relevant supervisory authority(ies) and affected individuals; and mandating the appointment of representatives in the UK and/or the EU in certain circumstances. In the United Kingdom, the UK Data Protection Act 2018 complements the UK GDPR in this regard. This fact may lead to greater divergence on the law that applies to the processing of such categories of personal data across the EEA and/or United Kingdom.

Additionally, the CCPA imposes obligations on covered businesses to provide specific disclosures related to a business’s collecting, using, and disclosing personal data and to respond to certain requests from California residents related to their personal data (for example, requests to know of the business’s personal data processing activities, to delete the individual’s personal data, and to opt out of certain personal data disclosures). Also, the CCPA provides for civil penalties and a private right of action for data breaches which may include an award of statutory damages. In addition, it is anticipated that the California Privacy Rights Act of 2020 (“CPRA”), effective January 1, 2023, will expand the CCPA. The CPRA will, among other things, give California residents the ability to limit use of certain sensitive personal data, establish restrictions on personal data retention, expand the types of data breaches that are subject to the CCPA’s private right of action, and establish a new California Privacy Protection Agency to implement and enforce the new law. U.S. federal and state consumer protection laws may require us to publish statements that accurately and fairly describe how we handle personal data and choices individuals may have about the way we handle their personal data.

See the section titled “Risk Factors – Risks Related to Our Regulatory Environment and Our Industry” for additional information about the laws and regulations to which we are or may become subject and about the risks to our business associated with such laws and regulations.

25

Table of Contents

Employees and Human Capital

As of December 31, 2021, we had 84 full-time employees, 54 of which have advanced degrees including 22 with Ph.D. degrees.

Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, training, incentivizing and integrating our existing and new employees, advisors and consultants. The principal purposes of our equity incentive plans are to attract, retain and reward personnel through the granting of equity-based compensation awards in order to increase shareholder value and the success of our company by motivating such individuals to perform to the best of their abilities and achieve our objectives.

None of our employees is represented by a labor organization or under any collective-bargaining arrangements. We consider our employee relations to be good.

Our Corporate Information

We were incorporated under the laws of the State of Delaware in July 1998 under the name Theramed, Inc. On December 31, 2001, we changed our name to MaxCyte, Inc. Our principal executive offices are located at 22 Firstfield Road, Suite 110, Gaithersburg, Maryland 20878, and our telephone number is (301) 944-1700.

Available Information

Our website address is www.maxcyte.com. In addition to the information about us and our subsidiaries contained in this Annual Report, information about us can be found on our website. Our website and information included in or linked to our website are not part of this Annual Report.

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act are available free of charge through our website as soon as reasonably practicable after they are electronically filed with or furnished to the Securities and Exchange Commission, or SEC. The SEC maintains an internet site that contains reports, proxy and information statements and other information that we file electronically with the SEC. The address of the SEC's website is www.sec.gov.

​

26

Table of Contents

Item 1A. Risk Factors

You should consider carefully the following risks and other information contained in this Annual Report on Form 10-K, including the section of this report captioned “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes. If any of the events contemplated by the following discussion of risks should occur, our business, results of operations, financial condition and growth prospects could suffer significantly. As a result, the market price of our common stock could decline, and you may lose all or part of the money you paid to buy our common stock. The risks below are not the only ones we face. Additional risks that we currently do not know about or that we currently believe to be immaterial may also impair our business. Certain statements below are forward-looking statements. See “Cautionary Note Regarding Forward-Looking Statements” in this report.

Risks Related to Our Business and Growth Strategy

We are a cell engineering and life sciences company and have incurred significant losses since our inception, and we expect to incur losses for the foreseeable future. We have limited product offerings approved for commercial sale and may never achieve or maintain profitability.

We are a cell engineering and life sciences company focused on advancing the discovery, development and commercialization of next-generation cell-based medicines. The biopharmaceutical development industry, where the majority of our customers operate, is a highly speculative undertaking and involves a substantial degree of risk. We have incurred significant losses since inception and have financed our operations principally through private financings and public offerings of our securities. We have historically relied on sales and licensing of our ATx, STx and GTx instruments, as well as sales of our portfolio of single-use disposable processing assemblies, or PAs, for the significant majority of our revenue. We may be unable to sell or license our instruments to new customers and existing customers may cease or reduce their utilization of our instruments or fail to renew licenses of our instruments. Our net losses were $19.1 million, $11.8 million and $12.9 million for the years ended December 31, 2021, 2020 and 2019, respectively. As of December 31, 2021, we had an accumulated deficit of $114.3 million. Our losses have resulted principally from expenses incurred for the research and clinical development of our proprietary cell therapy CARMA platform clinical candidate MCY-M11 and, to a lesser extent, our ex vivo cell engineering platforms and from sales and marketing costs, manufacturing expenses, management and administrative costs as well as other expenses that we have incurred while building our business infrastructure.

We concluded clinical activities associated with CARMA in the first half of 2021. We expect our expenses and operating losses, excluding CARMA, will continue to increase substantially for the foreseeable future as we expand our research and development efforts, expand the capabilities of our cell engineering platforms and operate as a public company in the United States. We anticipate that our expenses will increase substantially as we:

27

Table of Contents

We have devoted a significant portion of our financial resources and efforts to building our organization, developing our ex vivo cell engineering platforms, acquiring technology, building out our manufacturing capabilities, organizing and staffing the company, business planning, establishing our intellectual property portfolio, raising capital, securing license and partnership arrangements with customers and providing general and administrative support for these operations.

To become and remain profitable, we must succeed in realizing meaningful pre-commercial milestone payments from our current SPLs and potentially secure future commercial partnership, licensing or collaboration arrangements for use of our cell engineering platforms and similar arrangements for future platforms in development that have not yet been partnered. This will require us to be successful in a range of challenging activities, including continuing to develop our technology and products, accessing, developing and advancing manufacturing capacity, advancing our sales and marketing capabilities and commercializing and selling our products. We may never succeed in any or all of these activities and, even if we do, we may never generate a level of revenue that is sufficient to achieve profitability. Even if we do achieve profitability, we may not be able to sustain profitability or meet outside expectations for our financial results, including profitability. If we are unable to achieve or sustain profitability or to meet outside expectations for our financial results, the value of our shares of common stock could be materially adversely affected.

We are highly dependent on a limited number of product offerings. Our revenue has been primarily generated from the sale and licensing of our ATx, STx and GTx instruments, as well as sales of single-use disposable PAs, which require a substantial sales cycle and are prone to quarterly fluctuations in revenue.

Our ExPERT technology platform and family of instruments—the ATx, STx and GTx, representing next-generation technology for complex cellular engineering, was commercially launched in April 2019 and the VLx was added in December 2021. Sales and licensing of ExPERT technology systems and related instruments together accounted for 54%, 51% and 50% of our revenue for the years ended December 31, 2021, 2020, and 2019, respectively. We expect that, for at least the foreseeable future, sales and licensing of our ExPERT technology systems will continue to account for a substantial portion of our revenue. The sales cycle for our cell engineering instruments is complex and can take up to 12 months or longer to complete. Material, one-time milestones earned as Strategic Platform License, or SPL, customers achieve clinical progress may also, from time to time be a significant portion of our revenue, are not in our control, are unpredictable and because of the early-stage nature of the cell therapy clinical development, and may contribute materially to the volatility of our revenue. As a result of our lengthy and unpredictable sales cycle, we will be prone to quarterly fluctuations in our revenue. Quarterly fluctuations may make it difficult for us to predict our future operating results. Consequently, comparisons of our operating results on a period-to-period basis may not be meaningful. Investors should not rely on our past results as an indication of our future performance.

As a result of variability and unpredictability, we may also fail to meet the expectations of industry or financial analysts or investors for any period. If our revenue or operating results fall short of the expectations of analysts or investors or any guidance we may provide, or if the guidance we provide falls short of the expectations of analysts or investors, the price of our common stock could decline substantially. Such a stock price decline could occur even when we have met or exceeded any previously publicly stated guidance we may have provided.

We may be unable to successfully execute on our growth strategy.

We intend to grow our business and market opportunity by continuing to invest in technology and scientific innovation, broadening our distribution capabilities to expand our installed base of ExPERT products, pursuing SPLs with target customers, commercializing our recently released VLx very Large-Scale Transfection System under the ExPERT brand, expanding our commercial infrastructure and considering opportunistic investments, partnerships and acquisitions, among other initiatives. Each of these growth strategies will require considerable time and resources, and we may not be successful in executing any or all of these strategies.

One of the components of our growth strategy is to develop and commercialize our novel ExPERT VLx platform for large-scale bioprocessing applications including viral vector production in suspension cell cultures and rapid production of proteins, including monoclonal antibodies. Prior to the recent release of the EXPERT VLx, the first-generation design

28

Table of Contents

under the MaxCyte VLX brand had been sold to a limited number of customers for specific large-scale applications. The current design of the EXPERT VLx aligns with the design, capabilities and branding of three other ExPERT instruments (the STx, ATx and GTx). The specific product enhancements unique to the VLx will enable expansion into new applications such as large-scale bioprocessing and large-scale cell therapy. In order for the VLx to successfully penetrate new markets, we will be required to invest significant time, resources and capital investment in the further development, production and launch of the VLx platform, which could divert our resources from other parts of our business and growth strategy. In addition, the success of the redesigned ExPERT VLx, including new engineering modifications to the platform, may depend in part on the availability, compatibility and capability of appropriate technologies upstream and downstream of electroporation to support potential large-scale applications enabled by the VLx platform, our ability to develop and launch GMP-compliant processing assemblies, and willingness of customers to adopt the ExPERT VLx for new applications. Further, we could encounter delays and setbacks in the eventual full market launch of the ExPERT VLx platform, including implementing engineering modifications necessary for certain large-scale applications, resulting in delayed acceptance by future customers and partners of such a large-scale system. In addition, the sales and implementation cycles of customers for such a large-scale platform may require more time than originally assumed as we may encounter delays in acceptance by potential customers for the VLx platform in large-scale applications, which could negatively impact forecasted revenues.

Another component of our growth strategy is expanding our SPL model, through which we build collaborative relationships with our customers as we facilitate their efforts to bring critical cell-based medicines to market. Even if we are able to enter into additional future SPL arrangements and similar arrangements for future therapeutic products that have not yet been partnered, there can be no assurance that any of the therapeutic products that are being or might be developed by our partners using our technology will continue to advance through clinical development, receive regulatory approvals or be successfully developed into commercially viable products. As a result, we may suffer setbacks in increasing awareness and adoption of our products in addition to the material impact on our financial results as a result of milestones not being realized and leased instruments being returned. Further, setbacks in the clinical trials of our current or future partners, such as serious adverse events, including patient deaths, could significantly impact capital available to customers and our ability to enter into future SPL agreements with new therapeutic product companies.

Our growth strategy also involves expanding our international operations. In addition to risks associated with international operations in general, we will also need to navigate complex foreign regulatory requirements with which we may not be familiar or have experience. To operate successfully in or obtain regulatory approval in other countries, we must comply with numerous and varying regulatory requirements of such countries regarding safety, efficacy, manufacturing, clinical trials, commercial sales, pricing and distribution of our products. Although our partners have repeatedly been able to reference our FDA Master File in the United States and our Technical Files in some other countries in the course of clinical development of their therapeutic products, we cannot ensure that we will obtain or establish a regulatory Technical File in other countries. If we fail to establish a regulatory Technical File in any jurisdiction, this could make customers in such jurisdictions less likely to adopt our instruments, and the geographic market for our products could be limited.

We believe there are several opportunities to grow our sales and product line. However, we have limited financial and managerial resources, and we may forego or delay pursuit of growth opportunities that later prove to have greater value to our business. Our resource allocation decisions may cause us to fail to capitalize on viable opportunities, and we could spend resources on strategies that are not ultimately successful.

The estimates of market opportunity and forecasts of market growth included in this Annual Report or that we develop internally may prove to be inaccurate, and even if the markets in which we compete are as large as we estimate or achieve their forecasted growth, our business could fail to grow at projected rates, if at all.

Market opportunity estimates and growth forecasts included in this Annual Report, including those we have generated ourselves, are subject to significant uncertainty and are based on assumptions and estimates that may not prove to be accurate. The variables that go into the calculation of our market opportunity are subject to change over time, and there is no guarantee that any particular number or percentage of customers covered by our market opportunity estimates will purchase our products at all or generate any particular level of revenue for us. Any expansion in our market depends

29

Table of Contents

on a number of factors, including the cost and perceived value associated with our products and those of our competitors. Even if the markets in which we compete meet the size estimates and growth forecast in this Annual Report, our business could fail to grow at projected rates, if at all. Our growth is subject to many factors, including our success in implementing our business strategy, which is subject to many risks and uncertainties. Accordingly, the forecasts of market size and growth included in this Annual Report should not be taken as indicative of our future growth.

We rely on assumptions and estimates and data to calculate certain of our key metrics, and real or perceived inaccuracies in such metrics may harm our reputation and negatively affect our business.

In addition to our financial results, our management regularly reviews a number of operating and financial metrics, including a breakdown of product and leased revenue into instrument sales, PAs, leased revenue (recurring revenue), product placements, cumulative product placements, revenue by customer market (cell therapy and drug discovery), and status or number of installed instruments, SPLs, program licenses (research, clinical and SPL) and potential pre-commercial milestones, to evaluate our business, measure our performance, identify trends affecting our business, formulate financial projections and make strategic decisions. As both the industry in which we operate and our businesses continue to evolve, so might the metrics by which we evaluate our businesses. In addition, while the calculation of the metrics we use is based on what we believe to be reasonable estimates, our internal tools are not independently verified by a third party and have a number of limitations and, furthermore, our methodologies for tracking these metrics may change over time, for example, the industry breakdown of our customer revenue. Accordingly, investors should not place undue reliance on these metrics.

Our future success is dependent upon our ability to increase penetration in our existing markets and expand into adjacent markets.

Our customer base includes biopharmaceutical and biotechnology companies and academic institutions focused on cell-based therapeutics. Our success will depend in part upon our ability to increase our market penetration by expanding sales to existing customers and acquiring new customers and partnerships within our existing markets, and our ability to market new products and applications to existing and new customers as we develop such products and applications. Attracting new customers and introducing new products and applications require substantial time and expense. For example, it may be difficult to identify, engage and market to customers who are unfamiliar with our current products. We cannot guarantee that we will be able to further penetrate our existing markets or that these markets will be able to sustain our current and future product and service offerings. Any failure to increase penetration in our existing markets would adversely affect our ability to improve our operating results.

Our success will also depend on our ability to further expand into adjacent markets, such as penetrating non-commercial customer opportunities, including translational academic centers. Our failure to further expand in adjacent markets and attract new customers could adversely affect our ability to improve our operating results.

Due to the significant resources required to enable access in new markets, we must make strategic and operational decisions to prioritize certain markets, technology offerings and partnerships, and there can be no assurance that we will expend our resources successfully or in a way that results in meaningful revenue or capitalizes on potential new markets.

We believe our platform has potential applications across a wide range of markets and we have targeted certain markets in which we believe we have a higher probability of success or revenue opportunity or for which the path to commercialize products and realizing or achieving revenue is shorter. For example, we believe our products have applications in markets for engineered cell therapies in immuno-oncology and inherited disorders. We seek to continue to prioritize opportunities and allocate our resources among our programs to maintain a balance between advancing near-term opportunities and exploring additional markets for our technology. However, due to the significant resources required for the development of new markets, we must make decisions regarding which markets to pursue and the amount of resources to allocate to each. Our decisions concerning the allocation of research, development, collaboration, management and financial resources toward particular markets or workflows may not lead to the development of any viable product and may divert resources away from better opportunities. Similarly, our potential decisions to delay,

30

Table of Contents

terminate or collaborate with third parties in respect of certain markets may subsequently also prove to be suboptimal and could cause us to miss valuable opportunities. In particular, if we are unable to develop additional relevant products and applications for markets such as cell therapy or large-scale bioprocessing, it could slow or stop our business growth and negatively impact our business, financial condition, results of operations and prospects.

Our business is dependent on adoption of our products by biopharmaceutical companies and academic institutions for their research and development activities focused on cell-based therapeutics. If biopharmaceutical companies and academic institutions are unwilling to change current practices to adopt our products, it will negatively affect our business, financial condition, prospects and results of operations.

Our primary strategy to grow our revenue is to market our products across key stakeholders in cell-based therapeutics, such as biopharmaceutical companies and academic institutions. Most of our potential customers already use expensive research systems in their laboratories and may be reluctant to replace those systems. While the number of customers using our products has increased in recent years, many biopharmaceutical companies and academic institutions have not yet adopted our products, and such institutions and companies may choose not to adopt our products for a number of reasons, including:

In addition, our customers may experience a change of control or otherwise consolidate with other biopharmaceutical companies and academic institutions. If as a result of such change of control, our customers choose or are forced to modify or terminate cell therapy strategies, adopt other products, or otherwise reduce their use of our products, our ability to execute our growth strategy will be impaired and it will negatively affect our business, financial condition, prospects and results of operations.

We believe that educating notable industry key opinion leaders, or KOLs, and representatives of biopharmaceutical companies and academic institutions about the merits and benefits of our products for Flow Electroporation and cell engineering is one of the key elements of increasing the adoption of our products. If these KOLs, institutions and companies do not adopt our products for any reason, including those listed above, acceptance and adoption of our products will be slowed, our ability to execute our growth strategy will be impaired, and it will negatively affect our business, financial condition, prospects and results of operations.

31

Table of Contents

We may be unable to compete successfully against our existing or future competitors.

We operate in a highly competitive market characterized by rapid technological change, evolving industry standards, changes in customer needs, emerging competition, new product introductions and strong price competition. We currently compete with both established and early-stage life sciences technologies companies that design, manufacture and market electroporation and other non-viral cell engineering technology based on efficacy, price, ease of use, reimbursement and customer support services.

Our success depends, in part, on our ability to maintain a competitive position in the development of technologies, enhancements and products for use by our customers. Many of the companies developing or marketing competing or alternative products have competitive advantages when compared to us, including:

We primarily compete against products marketed by Lonza Group AG, Thermo Fisher Scientific Inc., Miltenyi Biotec, Bio-Rad Laboratories, Inc. and Harvard Bioscience, Inc. (BTX), as well as several other smaller companies, including spinouts from academic labs.

In addition to already marketed products, we also face competition from products that are or could be under development and that target the same applications as our products or applications that we may address in the future. Such product candidates may be developed by the above-mentioned entities and others, including life sciences tools companies, biotechnology companies, pharmaceutical companies, private and public research institutions and academic institutions or may come about as the result of consolidation in our industry. Our competitors may develop and patent processes or products earlier than we can, obtain regulatory clearance or approvals for competing products more rapidly than we can and develop more effective and/or less expensive products or technologies that render our technology or products obsolete or non-competitive. Despite the steps we have taken to maintain and protect our intellectual property, competitors may nevertheless attempt to, or succeed in, developing similar electroporation technology, including Flow Electroporation. We also compete with other organizations in recruiting and retaining qualified scientific and management personnel. If our competitors are more successful than us in these matters, we may be unable to compete successfully against our existing or future competitors.

32

Table of Contents

Our business currently depends significantly on research and development spending by biopharmaceutical companies, a reduction in which could limit demand for our products and adversely affect our business and operating results.

A portion of our revenue is derived from sales to biopharmaceutical companies and academic institutions. Much of their funding is, in turn, provided by public and private financings, including investments from venture capital funds and, for public companies, the capital markets. In the near term, we expect that a portion of our revenue will continue to be derived from sales to biopharmaceutical companies and academic institutions. Accordingly, the spending policies and practices of these customers—which have been impacted by the COVID-19 pandemic and may additionally be impacted by other factors—could have a significant effect on the demand for our products. In addition, the demand for our products may depend upon the research and development budgets of these customers, which are impacted by factors beyond our control, such as:

In addition, while the majority of our revenues are derived from biopharmaceutical customers, various state, federal and foreign agencies that provide grants and other funding may be subject to stringent budgetary constraints that could result in spending reductions, reduced grant making, reduced allocations or budget cutbacks, which could jeopardize the ability of these customers, or the customers to whom they provide funding, to purchase our products. For example, congressional appropriations to the National Institutes of Health, or NIH, have generally increased year-over-year in recent years, but the NIH also experiences occasional year-over-year decreases in appropriations. There is no guarantee that NIH appropriations will not decrease or cease in the future. A decrease in the amount of, or delay in the approval of, appropriations to NIH or other similar United States or foreign organizations, such as the Medical Research Council in the United Kingdom, could result in fewer grants benefiting life sciences research. These reductions or delays could also result in a decrease in the aggregate amount of grants awarded for life sciences research or the redirection of existing funding to other projects or priorities, any of which in turn could cause our customers and potential customers to reduce or delay purchases or licensing of our products.

Our operating results may fluctuate substantially due to the potential changes in our customers' resources as described above. Any decrease in our customers’ budgets or expenditures, or in the size, scope or frequency of their

33

Table of Contents

capital or operating expenditures, could materially and adversely affect our business, operating results and financial condition.

Our current research and development efforts may not produce significant revenue for several years, if at all.

Developing our products is expensive, and the investment in product development may involve a long payback cycle. Our investment in research and development may not result in the data we hope to develop to support marketing of our products or in marketable products or may result in products that take longer to generate revenue, or generate less revenue, than we anticipate. For the years ended December 31, 2021, 2020 and 2019, our research and development expenses were $15.4 million, $17.7 million and $17.6 million, respectively, or approximately 46%, 68% and 81%, respectively, of our total revenue. These amounts included $4.1 million, $11.1 million and $11.7 million, respectively, of investment in our CARMA platform including the clinical investment in our wholly-owned cell therapy candidate, MCY-M11. Although we have no plans to make further investments in development of MCY-M11, our future plans include increased significant investments in research and development of product opportunities for expansion of our products and new application areas for our products. We believe that we must continue to dedicate a significant amount of resources to our research and development efforts to maintain our competitive position. However, we may not receive significant revenue from these investments for several years, if at all.

Our international operations may raise additional risks, which could have an adverse effect on our operating results.

International customers have typically accounted for a meaningful portion of our revenue. For the year ended December 31, 2021, approximately 35% of our revenue was derived from international customers, with the most significant markets being the United Kingdom, Switzerland and China. We expect our international revenue and operations will continue to expand in the future. Our international operations are subject to a variety of risks that we do not face in the United States, including:

34

Table of Contents

In connection with the ongoing armed conflict between Russia and Ukraine, the U.S. government, United Kingdom and European Union countries have imposed enhanced export controls on certain products and sanctions on certain industry sectors and parties in Russia and the regions of Donetsk and Luhansk, as well as enhanced export controls on certain products and industries. The U.S. government has also indicated it will consider imposing additional sanctions and other similar measures in the near future. These and any additional sanctions and export controls, as well as any counter responses by the governments of Russia or other jurisdictions, could adversely affect, directly or indirectly, the levels of government spending or the global supply chain, with negative implications on the availability and prices of raw materials, energy prices, and our customers, as well as the global financial markets. Although we do not currently conduct any operations in Russia or Ukraine, further escalation of geopolitical tensions could have a broader impact that expands into other markets where we do business or conduct operations, which could adversely affect our business and sales of our products.

As we continue to expand our business globally, our success will depend, in large part, on our ability to anticipate and effectively manage these and other risks associated with our international operations.

Our overall success in international markets depends, in part, on our ability to succeed in differing legal, regulatory, economic, social and political conditions. We may not be successful in developing and implementing policies and strategies that will be effective in managing these risks in each country where we do business. Our failure to manage these risks successfully could harm our international operations, reduce our international sales and increase our costs, thus adversely affecting our business, operating results and financial condition.

If we fail to offer high-quality customer service, our business and reputation could suffer.

We differentiate ourselves from our competition through our commitment to an exceptional customer experience. Accordingly, high-quality customer service is important for the growth of our business and any failure to maintain such standards of customer service, or a related market perception, could affect our ability to sell products to existing and prospective customers. The number of our customers has grown significantly and such growth, as well as any future growth, will put additional pressure on our field application scientists and customer service organization. We may be unable to hire qualified staff quickly enough or to the extent necessary to accommodate increases in demand. Providing an exceptional customer experience requires significant time and resources from our customer service team. Therefore, failure to scale our customer service organization adequately may adversely impact our business results and financial condition.

Customers utilize our service teams and online content for help with a variety of topics, including how to use our products efficiently, how to integrate our products into existing workflows, and how to resolve technical, analysis and operational issues if and when they arise. While we have developed significant resources for remote training and customer service, including our virtual product demonstration process, if our customers do not adopt these resources, we may be required to increase the staffing of our customer service team, which would increase our costs. Also, as our business scales, we may need to engage third-party customer service providers, which could increase our costs and negatively impact the quality of the customer experience if such third parties are unable to provide service levels equivalent to ours.

In addition, as we continue to grow our operations and reach a global customer base, we need to be able to provide efficient customer service that meets our customers’ needs globally at scale. In geographies where we sell through distributors, we often rely on those distributors to provide customer service. If these third-party distributors do not provide a high-quality customer experience, our business operations and reputation may suffer.

35

Table of Contents

If we cannot maintain and expand current partnerships and enter into new partnerships that generate marketed licensed products, our business could be adversely affected.

We do not have our own pipeline of therapeutic candidates, and instead we focus our efforts on the development of our cell engineering offerings, including our ExPERT platform. Our partners then use our instruments and PAs for cell engineering to develop their own therapeutic candidates without our direct involvement. As a result, our success depends on our ability to expand the number and scope of our partnerships. Many factors may impact the success of these partnerships, including our ability to perform our obligations, our partners’ satisfaction with our products, competitive offerings of other companies, our partners’ ability to successfully develop, secure regulatory approval for and commercialize therapeutic candidates using our products, our partners’ internal priorities (including fluctuations in research and developments budgets), our partners’ resource allocation decisions and competitive opportunities, disagreements with partners, the costs required of either party to the partnerships and related financing needs, and operating, legal and other risks in any relevant jurisdiction, as well as severe adverse events in cell therapy trials regardless of association with our partners.

We engage in conversations with companies regarding potential partnerships on an ongoing basis. These conversations may not result in a commercial agreement. Even if an agreement is reached, the resulting relationship may not be successful, including due to factors beyond our control, such as our partners’ inability to successfully develop or commercialize their therapeutic candidates. In such circumstances, we would not generate any substantial revenues from such a collaboration in the form of milestone payments, royalties or otherwise. Speculation in the industry about our existing or potential partnerships can be a catalyst for adverse speculation about us which can adversely affect our reputation and our business.

Further, our customers are subject to the extensive risks and uncertainties that apply to product candidates in this area including those associated with preclinical and clinical research and development and related regulatory and Institutional Review Board authorization and oversight, manufacturing challenges and compliance standards, the data requirements and review process for seeking marketing authorization, and the potential for safety and efficacy concerns to emerge at any stage of product development and even after approval.

If the quality or delivery of our products does not meet our customers’ expectations and needs relative to their regulatory obligations, our reputation could suffer and ultimately our sales and financial results could be negatively impacted.

Our customers operate in a highly regulated industry. In the course of conducting our business, our customers will expect us to adequately address any quality issues suspected to be associated with our products, including defects in our engineering, design, manufacturing and delivery processes, as well as defects in third-party components included in our products. The occurrence of defects in our products may increase as we continue to introduce new products and rapidly scale up manufacturing to meet potentially increased customer demand. Although we have established internal procedures designed to reduce the risks of product quality issues that may arise, there can be no assurance that we will be able to eliminate or mitigate occurrences of these issues and associated potential liabilities. In addition, identifying the root cause of quality issues may be difficult, which increases the time needed to address quality issues as they arise and increases the risk that similar problems could recur. Finding solutions to quality issues can be expensive and we may incur significant costs or lost revenue in connection with, for example, shipment holds, product recalls or other service obligations. In addition, quality issues can impair our relationships with new or existing customers and adversely affect our brand image, and our reputation could suffer, which could adversely affect our business, financial condition, results of operations, cash flows and prospects.

The failure of our partners to meet their contractual obligations to us could adversely affect our business.

Our reliance on our partners poses a number of additional risks, including the risk that they may not perform their contractual obligations to us to our standards, in compliance with applicable legal or contractual requirements, in a timely manner or at all; they may not maintain the confidentiality of our proprietary information; and disagreements or

36

Table of Contents

disputes could arise that could cause delays in, or termination of, the research, development or commercialization of therapeutic candidates produced using our instruments and PAs.

In addition, certain of our partners are large, multinational organizations that run many programs concurrently, and we are dependent on their ability to accurately track and make milestone payments to us pursuant to the terms of our agreements with them. Any failure by them to inform us when milestones are reached and make related payments to us could adversely affect our results of operations.

Some of our partners operate in markets subject to political and social risk, corruption, infrastructure problems and natural disasters, and are often subject to country-specific data privacy and data security risk as well as burdensome legal and regulatory requirements. Any of these factors could adversely impact their financial condition and results of operations, which could impair their ability to meet their contractual obligations to us, which may have a material adverse effect on our business, financial condition and results of operations.

Our partners have significant discretion in determining when and whether to make announcements, if any, about the status of their clinical developments and timelines for advancing collaborative programs, and the price of our common stock may decline as a result of announcements of unexpected results or developments.

Our partners have significant discretion in determining when and whether to make announcements about the status of their programs that use our technology, including their pre-clinical and clinical programs, such as setbacks or terminations, and timelines for advancing therapeutic candidates developed using our platform. We do not plan to disclose the development status and progress of individual therapeutic candidates of our partners. Our partners may wish to report such information more or less frequently than we prefer or may not wish to report such information at all. In addition, if partners choose to announce a collaboration with us or their progress, there is no guarantee that we will concurrently recognize any fees or that such announcement will be indicative of future fees to us, as such fees are not due to us until our partner reaches certain specific activities or clinical progress events, for example investigational new drug, or IND, submissions or start of pivotal trials. The price of our common stock may decline as a result of the public announcement of unexpected results or developments in our partnerships, or as a result of our partners withholding such information.

Our partners may not achieve projected development and regulatory milestones and other anticipated key events in the expected timelines or at all, or may discontinue some or all of their programs, which could have an adverse impact on our business and could cause the price of our common stock to decline.

From time to time, we may make public statements regarding the expected timing of certain milestones and key events, as well as regarding developments and milestones under our partnerships, to the extent that our partners have publicly disclosed such information or permit us to make such disclosures. Certain of our partners have also made public statements regarding their expectations for the development of programs under partnership with us and they and other partners may in the future make additional statements about their goals and expectations for the progress of their programs and/or their partnerships with us. The actual timing of these events and any resultant revenue to us can vary dramatically due to a number of factors such as delays or failures in our or our current and future partners’ therapeutic discovery and development programs and the numerous uncertainties inherent in the development of therapeutics. As a result, there can be no assurance that our partners’ current and future programs will advance or be completed in the time frames we or they expect, or at all.

Our partners’ development timelines may also be impacted by the current armed conflict between Russia and Ukraine. The escalation of this conflict and the resulting imposition of economic and other sanctions could disrupt or delay our partners’ ability to conduct clinical trial activities, including the evaluation of safety or efficacy data. Although the length and impact of any military action are highly unpredictable, clinical trial sites in Ukraine and other countries may close, and patients could be forced to evacuate or voluntarily choose to relocate far from clinical trial sites, making them unavailable for further dosing or follow-up. The closure of sites, the inability to screen and enroll new patients or any premature discontinuation of treatment by patients already enrolled in our partners’ trials could result in the need to

37

Table of Contents

enroll additional patients, which would be costly and could delay our partners’ anticipated timelines for the completion of the trials. There may also be an impact on the health and safety of the trial patients, including an increase in the number and severity of adverse events, due to living in a conflict zone and limited or no access to hospitals or healthcare.

In addition, we have very little visibility into, or advance notice of, any changes in our partners’ development timelines and expectations, which means that we may not be able to swiftly react and adapt to changed expectations related to the achievement and payment of milestones under our agreements. If our partners fail to achieve one or more of these milestones or other key events as we or they expect, our business could be materially adversely affected and the price of our common stock could decline.

Biopharmaceutical drug and therapeutics development is inherently uncertain, and it is possible that none of the drug or therapeutic candidates discovered using our platform that are further developed by our partners will receive marketing approval or become viable commercial products, on a timely basis or at all.

We offer our cell engineering platform to partners who are engaged in drug and therapeutics discovery and development. These partners include large pharmaceutical companies, biotechnology companies of all sizes and non-profit and academic institutions. While we receive early payments generated through sales of our ExPERT instruments and PAs and recurring revenue through the annual licenses of the ExPERT instrument to our partners, we estimate that the vast majority of the economic value of the SPLs that we enter into with our partners is in the downstream payments that are payable if certain milestones are met or approved products are sold. As a result, our future growth is dependent on the ability of our partners to successfully develop and commercialize therapies discovered or produced using our platform. Due to our reliance on our partners, the risks relating to product development, regulatory clearance, authorization or approval and commercialization apply to us derivatively through the activities of our partners. There can be no assurance that our partners will successfully develop, secure marketing approvals for and commercialize any drug or therapeutic candidates discovered or produced with our instruments. As a result, we may not realize the intended benefits of our partnerships. Since 2017, we have entered into 15 SPLs resulting in a growing number of clinical milestone payments, but we have not yet had a licensed program receive regulatory marketing approval.

Due to the uncertain, time-consuming and costly clinical development and regulatory approval process, our partners may not successfully develop any drug or therapeutic candidates with our platform, or our partners may choose to discontinue the development of these drug candidates for a variety of reasons, including due to safety, risk versus benefit profile, exclusivity, competitive landscape, manufacturing challenges, commercialization potential, production limitations or prioritization of their resources. For product candidates of the type expected to be developed using our technology, there is the potential they could create a safety risk to patients and can also limit product efficacy. It is possible that none of these drug or therapeutic candidates will ever receive regulatory approval and, even if approved, such drug candidates may never be successfully commercialized resulting in clinical progress milestones and commercial sales-based payments not being earned.

Regulatory authorities have substantial discretion in the review and approval process and may refuse to accept any application or may decide that our partners’ data are insufficient to support progression to further stages of pre-clinical or clinical development or for marketing approval and require additional preclinical, clinical or other studies. The number and types of pre-clinical studies and clinical trials that will be required for regulatory approval also varies depending on the product candidate (including cell therapies, for which development is inherently challenging), the disease or condition that the product candidate is designed to address, and the regulations applicable to any particular product candidate. Application of the legal and regulatory standards for approval, and the type and amount of clinical data and data supporting Chemistry, Manufacturing and Control necessary to gain approval may change during the course of a product candidate’s clinical development and may vary among jurisdictions. It is possible that any product candidates our partners may seek to develop in the future will never obtain the appropriate, necessary regulatory approvals.

In addition, even if these drug or therapeutic candidates receive regulatory approval in the United States, our partners may never obtain approval or commercialize such drugs outside of the United States, which would limit their full market potential and therefore our ability to realize their potential downstream value. Furthermore, approved drugs

38

Table of Contents

or therapeutics may not achieve broad market acceptance among physicians, patients, the medical community and third-party payors, in which case revenue generated from their sales would be limited. Third-party payers may opt to implement efficacy-based payment mechanisms over a multi-year period, which could impact potential product sales in any given year. Likewise, our partners have to make decisions about which clinical stage and pre-clinical drug and therapeutic candidates to develop and advance, and our partners may not have the resources to invest in all of the drug or therapeutic candidates that are produced using our platform, or clinical data and other development considerations may not support the advancement of one or more drug candidates developed using our platform. Decision-making about which drug or therapeutic candidates to prioritize involves inherent uncertainty, and our partners’ development program decision-making and resource prioritization decisions, which are outside of our control, may adversely affect the potential value of those partnerships. Additionally, subject to its contractual obligations to us, if one or more of our partners is involved in a business combination, the partner might deemphasize or terminate the development or commercialization of any drug or therapeutic candidate that utilizes our platform. If one of our SPL customers terminates its agreement with us, we may find it more difficult to attract new partners.

Our partners, and therefore our potential financial outcomes under our agreements, are also subject to inherent industry-wide FDA and other regulatory risk. The number of new drug applications and biologics license applications approved by the FDA varies significantly over time and if there were to be an extended reduction in the number of new drug applications and biologics license applications approved by the FDA, the industry would contract and our business would be materially harmed. Furthermore, regulatory agencies may introduce new submission requirements or implement new regulations for cell and gene therapies which could result in extended timelines for our partners, creating uncertainty or delays in achieving milestones. Such delays in these milestones will materially affect our ability to forecast and receive milestone payments outlined in our license agreements.

Our partners’ failure to effectively advance, market and sell suitable drug and therapeutic candidates developed using our platform could have a material adverse effect on our business, financial condition, results of operations and prospects, and cause the market price of our common stock to decline. In addition to the inherent uncertainty in drug development addressed above, our ability to forecast our future revenues may be limited.

In recent periods, we have depended on a limited number of partners for our revenue, the loss of any of which could have an adverse impact on our business.

For the year ended December 31, 2021, one cell therapy company with which we have entered into an SPL accounted for 21% of our total revenue, and our six largest such customers accounted for an aggregate of approximately 40% of our total revenue for the year through a combination of instrument license fees, milestones realized and processing assembly revenue. These partnerships cover a large number of programs under contract, and therefore represent a large portion of potential downstream value. In addition, our partnership agreements are typically terminable at will. As a result, if we fail to maintain our relationships with our partners or if any of our partners discontinue their programs or transition to alternative cell engineering technologies, our future results of operations could be materially and adversely affected.

Similarly, in recent periods, a portion of our revenue has been derived from milestone payments from a limited number of SPL customers. Accordingly, we are more dependent on the success of a limited number of our customers’ programs than we would be if our revenue was derived more broadly from many customer contracts. The loss of any of our large customers, or significant delays or discontinuations in our customers’ programs, would have an adverse effect on our ability to generate revenue.

Our customers’ products or product candidates may cause undesirable side effects or have other properties that could delay or prevent their regulatory approval, limit their commercial potential or result in significant negative consequences following any potential marketing approval, which could cause our future results of operations to be materially and adversely affected.

Serious adverse events or undesirable side effects caused by our customers’ products or product candidates could cause regulatory authorities to interrupt, delay or halt clinical trials and could result in a more restrictive label or the

39

Table of Contents

delay or denial of regulatory approval by the FDA, the European Medicines Agency or other authorities. Results of our customers’ clinical trials could reveal a high and unacceptable severity and prevalence of side effects, toxicities or unexpected characteristics, including death.

If unacceptable side effects or deaths arise in the development of our customers’ product candidates, the Institutional Review Boards at the institutions in which their studies are conducted, the FDA or any comparable foreign regulatory authority could suspend or terminate our customers’ clinical trials or the FDA or other regulatory authorities could order them to cease clinical trials or deny approval of their product candidates for any or all targeted indications. Undesirable side effects or deaths in clinical trials with our customers’ product candidates may cause the FDA or comparable foreign regulatory authorities to place a clinical hold on the associated clinical trials, to require additional studies or otherwise, to delay or deny approval of our customers’ product candidates for any or all targeted indications. Treatment-related side effects could also affect patient recruitment or the ability of enrolled patients to complete the trial or result in potential product liability claims. In addition, these side effects may not be appropriately recognized or managed by the treating medical staff. Any of these occurrences could negatively impact the availability of capital for the broader cell therapy development market, reduce the demand for our products and harm our business, financial condition and prospects significantly.

We may continue to pursue collaborations or licensing arrangements, joint ventures, strategic alliances, partnerships or other strategic investment or arrangements, which may fail to produce anticipated benefits and adversely affect our operations.

We may continue to pursue opportunities for collaboration, out-license, joint ventures, acquisitions of products, assets or technology, strategic alliances or partnerships that we believe would advance our development. We may consider pursuing growth through the acquisition of technology, assets or other businesses that may enable us to enhance our technologies and capabilities. Proposing, negotiating and implementing these opportunities may be a lengthy and complex process. Other companies, including those with substantially greater financial, marketing, technology or other business resources, may compete with us for these opportunities or arrangements. We may not be able to identify, secure or complete any such transactions or arrangements in a timely manner, on a cost-effective basis on acceptable terms or at all.

We have limited experience with respect to these business development activities. Management and integration of a licensing arrangement, collaboration, joint venture or other strategic arrangement may disrupt our current operations, decrease our profitability, result in significant expenses or divert management resources that otherwise would be available for our existing business. We may not realize the anticipated benefits of any such transaction or arrangement.

Furthermore, partners, collaborators or other parties to such transactions or arrangements may fail to fully perform their obligations or meet our expectations or cooperate with us satisfactorily for various reasons and subject us to potential risks, including the following:

40

Table of Contents

Any such transactions or arrangements may also require actions, consents, approval, waiver, participation or involvement of various degrees from third parties, such as regulators, government authorities, creditors, licensors or licensees, related individuals, suppliers, distributors, shareholders or other stakeholders or interested parties. There is no assurance that such third parties will be cooperative as we desire, or at all, in which case we may be unable to carry out the relevant transactions or arrangements.

We may engage in future acquisitions that could disrupt our business, cause dilution to our stockholders and harm our financial condition and operating results.

In the future, we may acquire companies, assets or technologies in an effort to complement our existing offerings to enhance our market position. We have not made any acquisitions to date and we currently have no plans, proposals or arrangements with respect to any acquisition. Should we choose to pursue an acquisition in the future, we may not be able to find suitable acquisition candidates and we may not be able to complete acquisitions on favorable terms, if at all. Any future acquisitions we make could subject us to a number of risks, including:

41

Table of Contents

Any acquisitions may not generate sufficient revenue to offset the associated costs of the transactions or may result in other adverse effects, which could have a material adverse effect on our business, operating results, and financial condition. In addition, negotiations for acquisitions, collaborations or investments that are not ultimately consummated could result in significant diversion of management time, as well as substantial out-of-pocket costs, any of which could have a material adverse effect on our business, operating results and financial condition.

Risks Related to the Supply and Manufacturing of Our Products

We depend on continued supply of components and raw materials for our ExPERT instruments and PAs from third-party suppliers, and if shortages of these components or raw materials arise, we may not be able to secure enough components to build new products to meet customer demand or we may be forced to pay higher prices for these components.

We rely on a limited number of suppliers for certain key components utilized in the assembly of our ExPERT instruments and manufacture of our PAs and buffer, and in some cases, such as certain instrument components, for example CPU chips or PA electrodes, we rely on a single supplier for a particular component, subassembly or consumable. Approximately 33% of our inventory held at December 31, 2021, was purchased from one supplier. Although in many cases we use standard components in our products, in some cases, components may only be purchased from a limited number of suppliers or a single supplier. Identifying and qualifying alternate sources may take time and involve additional expense, and there is no guarantee that current suppliers or alternate sources will timely deliver materials that meet our needs. If our customers experience a shortage or delay in delivery of our ExPERT instruments, PAs or buffers our business could be materially and adversely impacted.

Neither we nor our contract manufacturers enter into long-term supply contracts for these components, and none of our third-party suppliers is obligated to supply products to us for any specific period or in any specific quantities, except as may be provided for in submitted and accepted purchase orders. We are not a major customer of many of our suppliers, and these suppliers may therefore give other customers’ needs higher priority than ours. Our industry has experienced component shortages and delivery delays in the past, and we may experience shortages or delays of critical components in the future as a result of strong demand in the industry, high demand in unrelated industries such as shortages of electronic components due to digitization in the automotive industry, or other factors. Many of the other components required to build our ExPERT instruments are also occasionally in short supply. Global supply chain constraints during 2021 and 2022 have resulted in some of our suppliers having to prioritize certain customers. While we seek to maintain priority with our suppliers, there can be no guarantee that we will not experience shortages as a result of supply chain issues. In addition, the current armed conflict between Russia and Ukraine, and sanctions imposed in response thereto, may create new supply chain issues or exacerbate current supply chain challenges. If shortages or delays arise, we may not be able to timely secure enough components at reasonable prices or of acceptable quality to build new products, resulting in an inability to meet customer demand or our own operating goals, which could adversely affect our customer relationships, business, operating results and financial condition.

Many of the components that we use are part of the global supply chain and may be manufactured overseas. Therefore, our access to, or ability to acquire, components may be impacted by trade disputes or importation restrictions

42

Table of Contents

resulting from such trade disputes between governments. These disputes may result in increased tariffs, duties or taxes that will increase the cost of the components and we may have to increase the price of our products, or incur an impact on our margins, both of which can materially affect customer demand and resulting revenues.

Additionally, damage to a manufacturing facility or other property of any of our suppliers or their distribution channels due to fire, flood or other natural disaster or casualty event may have a material adverse effect on our business, financial condition and results of operations.

We have limited experience manufacturing our PAs and if we move manufacturing of our PAs in-house in the future and are unable to manufacture our PAs in high-quality commercial quantities successfully and consistently to meet demand, our growth will be limited.

We have limited experience manufacturing our products. We do not currently manufacture our PAs in-house but may choose to do so in the future. To manufacture our PAs in the quantities that we believe will be required to meet the currently anticipated market demand, we will need to increase manufacturing capacity, which will involve significant challenges and may require additional quality controls. We may not successfully complete any required increase to existing manufacturing capacity in a timely manner, or at all.

If there is a disruption to our manufacturing operations, we will have no other means of producing our products until we resolve such issues with our manufacturing facilities, develop alternative manufacturing facilities or contract with third-party manufacturers capable of producing our PAs. Additionally, any damage to or destruction of our manufacturing facilities or equipment may significantly impair our ability to supply PAs on a timely basis. There may also be unforeseen occurrences that increase our costs, such as increased prices of the components of our PAs, changes to labor costs or less favorable terms with third-party suppliers. There can be no assurance that we will not encounter such problems in the future.

If we are unable to manufacture PAs consistently and in sufficient quantities to meet anticipated customer demand, our business, financial condition, results of operations and prospects would be harmed. If we choose to scale the commercial production of our PA and increase our manufacturing capacity, we may encounter quality issues that could result in product defects, errors or recalls. Manufacturing delays related to quality control could negatively impact our ability to bring our PAs to market, harm our reputation and decrease our revenue. Any defects, errors or recalls could be expensive and generate negative publicity, which could impair our ability to market or sell our PAs, and adversely affect our results of operations. Our inability, or that of our suppliers, to find and retain the necessary qualified employees to achieve our manufacturing goals would also negatively impact our ability to meet customer needs.

In addition, we have historically sourced and for the foreseeable future will continue to source components for our PAs from a limited number of manufacturers and, in some cases, sole source manufacturers. With respect to our PA manufacturers, we are neither a major customer, nor do we have long-term supply contracts. These manufacturers may therefore give other customers’ needs higher priority than ours, and we may not be able to obtain adequate supply in a timely manner or on commercially reasonable terms. While we are in the process of qualifying additional manufacturers, qualifications can take many months. If we were to lose one or more of our sole or single source manufacturers and suppliers, it would take significant time and effort to qualify alternative suppliers, if available. Moreover, in the event that we transition to a new manufacturer, particularly from any of our single source manufacturers, doing so could be time-consuming and expensive, may result in interruptions in our ability to supply our products to the market and could affect the performance of our PAs, resulting in increased costs and negative customer perception and could have a material adverse effect on our business, financial condition and results of operations.

Our results of operations will be harmed if we are unable to accurately forecast customer demand for our products and manage our inventory.

To ensure adequate supply of our instruments, PAs and other products, we must forecast the inventory needs of our current and prospective customers and manufacture our products based on our estimates of future demand. Our ability to accurately forecast demand for our products could be negatively affected by many factors, many of which are beyond

43

Table of Contents

our control, including our failure to accurately manage our expansion strategy, product introductions or failures by competitors, an increase or decrease in customer demand for our products or for products of our competitors, the availability of capital for our customers, our failure to accurately forecast the success of our customers’ therapeutic products, market acceptance of new products, changes in general market conditions, including as a result of the COVID-19 pandemic, seasonal demands, regulatory matters or strengthening or weakening of general economic conditions.

We seek to maintain sufficient levels of inventory of our instruments and other products to protect ourselves from supply interruptions. We rely in part on our commercial team and distributors to supply forecasts of anticipated product orders in their respective territories. If we fail to accurately estimate customer demand for our products, our inventory forecasts may be inaccurate, resulting in shortages or excesses of inventory. Inventory levels in excess of customer demand may result in inventory write-downs or write-offs, which could negatively impact our business, prospects, financial condition and results of operations. Conversely, if we underestimate customer demand for our products, we may not be able to deliver products in a timely manner or at all, and this could result in reduced revenue and damage to our reputation and customer relationships. In addition, if we experience a significant increase in demand, we may not have adequate manufacturing capacity to meet such demand, and additional supplies may not be available when required on terms that are acceptable to us, or at all, or suppliers may not be able to allocate sufficient capacity in order to meet our increased requirements, all of which would negatively affect our business, financial condition and results of operations. If we are unable to meet customer demand, we could lose our existing customers or lose our ability to acquire new customers, which would also negatively impact our business, financial condition and the results of operations.

Risks Related to Our Product Sales

Our future success depends on our ability to develop and successfully introduce new and enhanced products that meet the needs of our customers.

Our offerings include products such as instruments, single-use disposables and the provision of support services to our customers with the goal of supporting the advancement of our customers’ cell-therapies and/or drug discovery activities. We aim to collectively provide our customers with a single, integrated platform to discover, develop and manufacture safer, more targeted and increasingly complex cell-based therapies, designed for integration into customers’ current good manufacturing practices environments. We cannot guarantee that the market for our current products will continue to generate significant or consistent demand. Demand for our current products could be significantly diminished by competitive technologies or products that replace them or render them obsolete or less desirable. Accordingly, we must continue to invest in research and development to develop competitive products. Restrictions resulting from the COVID-19 pandemic have had a negative impact on the work of some of our, and our customers’, research and development programs due to limitations on in-person lab work.

Our future success depends on our ability to anticipate our customers’ needs and develop new products and enhance current products to address those needs. Introduction of new products and product enhancements will require that we effectively transfer production processes from research and development to manufacturing and coordinate our efforts with those of our suppliers to achieve the desired level of production. If we fail to transfer production processes effectively, develop product enhancements or introduce new products or enabling services in sufficient quantities to meet the needs of our customers, or effectively coordinate with our suppliers, our sales may be reduced and our business would be harmed.

The commercial success of all of our products will depend upon their acceptance by the life science and biopharmaceutical industries. Some of the products that we are developing are based upon new technologies or approaches. As a result, there can be no assurance that these new products, even if successfully developed and introduced, will be accepted by customers. If customers do not adopt our new products, services and technologies, our results of operations may suffer and, as a result, the market price of our common stock may decline.

44

Table of Contents

If we are unable to successfully develop new products, adapt to rapid and significant technological change, respond to introductions of new products by competitors, make strategic and operational decisions to prioritize certain markets, technology offerings or partnerships, and develop and capitalize on markets, technologies or partnerships, our business could suffer.

We currently sell and license our products primarily in the cell therapy market, which is characterized by significant enhancements and evolving industry and regulatory standards and a high degree of regulatory scrutiny. As a result, our customers’ needs are rapidly evolving. If we do not appropriately innovate and offer our customers comprehensive solutions and otherwise invest in new technologies, our offerings may become less desirable in the markets we serve, and our customers could move to new technologies offered by our competitors or make products themselves. Without the timely introduction of new instruments, single-use disposables software, services, enhancements and new product integrations with electroporation, our offerings may become less competitive over time, in which case our competitive position and operating results could suffer. Accordingly, we focus significant efforts and resources on the development and identification of new products and applications to further drive adoption of our platform. To the extent we fail to timely introduce new and innovative products, offer enhancements to our existing products, adequately predict our customers’ needs or fail to obtain desired levels of market acceptance, our business may suffer and our operating results could be adversely affected.

We believe our products have potential applications across a wide range of markets and we have targeted certain markets in which we believe our technology has significant advantages, or for which we believe we have a higher probability of success or significant revenue opportunity. For example, we are committed to developing our platform’s applications within the life sciences market, including research, discovery, development, and manufacturing of next-generation autologous and allogeneic cell-based therapeutics, as well as drug discovery, including protein production for biological therapeutics, viral vectors, vaccines and for the discovery of small molecule drugs. We seek to maintain a process of prioritization and resource allocation among our programs to maintain a balance between advancing near-term opportunities and exploring additional markets and uses for our technology. However, due to the significant resources required for the development of applications data for our products or services for new markets, we must make decisions on which markets to pursue and the amount of resources to allocate to each. Our decisions concerning the allocation of research, development, collaboration, management and financial resources toward particular markets, products or services may not lead to the development of any viable products or services and may divert resources away from better opportunities. Similarly, our potential decisions to delay, terminate or collaborate with third parties in respect of certain markets may subsequently also prove to be suboptimal and could cause us to miss valuable opportunities. In particular, if we are unable to successfully achieve on-going adoption of our electroporation platform technology, it could slow or stop our business growth and negatively impact our business, financial condition, results of operations and prospects.

New product development involves a lengthy and complex process and we may be unable to develop or commercialize products on a timely basis, or at all.

Products from our research and development programs will take time and considerable resources to develop, and may include improvements or changes to our current products, and we may not be able to complete development and commercialization of new or enhanced products on a timely basis, or at all. There can be no assurance that our research and development efforts will produce commercially viable products and solutions and before we can commercialize any new products, we will need to expend significant funds in order to, for example:

45

Table of Contents

Our product development processes involve a high degree of risk, and these efforts may be delayed or fail for many reasons, including failure of the product to perform as expected and failure to reliably demonstrate the advantages of the product.

Even if we are successful in developing new products, it will require us to make significant additional investments in marketing and selling resources to commercialize any such products. As a result, we may be unsuccessful in commercializing new products that we develop, which could adversely affect our business, financial condition, results of operations and prospects.

Our systems are complex in design and may contain defects that are not detected until deployed by our customers, which could harm our reputation, increase our costs and reduce our sales. If our products do not perform as expected or the reliability of the technology on which our products are based is questioned, our operating results, reputation and business will suffer.

Our success depends on our ability to provide reliable, high-quality products that enable high performance cell engineering through flexible, efficient and cost-effective solutions. Our systems are complex in design and involve a highly complex and precise manufacturing process. As a result of the technological complexity of our systems, changes in our suppliers’ manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a product recall, or an adverse effect on our ability to achieve acceptable manufacturing quality and product reliability. To the extent that we do not achieve and maintain our projected quality or product reliability, our reputation, business, operating results, financial condition and customer relationships would be adversely affected.

Our customers may discover defects in our products after the products have been fully installed and operated. In addition, some of our products include components from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to identify and fix defects or other problems, we could experience, among other things:

We believe that customers in our target markets are likely to be particularly sensitive to product defects and errors. Our reputation and the image of our products, services and technologies in our target markets may be impaired if our products or services fail to perform as expected. If our products do not perform, or are perceived to not have performed, as expected or favorably in comparison to competitive products, our operating results, reputation, and business will suffer, and we may also be subject to legal claims arising from product limitations, errors, or inaccuracies. Any of the foregoing could have an adverse effect on our business, financial condition and results of operations.

Although our products are tested in accordance with industry standards prior to shipment, defects or errors could nonetheless occur. For example, our instruments or PAs could fail or our partners could use our technology improperly and blame a failure on our systems, resulting in customer complaints and significant resources dedicated to finding the

46

Table of Contents

cause of the failure and/or developing a solution. Our operating results depend on our ability to execute and, when necessary, improve our quality management strategy and systems and our ability to effectively train and maintain our employees with respect to quality management. A failure of our quality control systems could result in problems with facility operations or preparation or provision of products. In each case, such problems could arise for a variety of reasons, including equipment malfunction, failure to follow specific protocols and procedures, problems with raw materials or environmental factors and damage to, or loss of, manufacturing operations.

We provide a standard one-year warranty on sold instruments. Existing and future warranties place us at the risk of incurring future repair and/or replacement costs. Since a large portion of our revenue is derived from sales of our PAs, which can only be used when our instruments are functioning, if our instruments fail to function and our customers choose to use alternative cell engineering methods our financial condition and results of operations would suffer. In addition, even after any underlying concerns or problems are resolved, any lingering concerns in our target markets regarding our technology or any manufacturing defects or performance errors, either actual or simply perceived, in our products or services could continue to result in lost revenue, delayed market acceptance, damage to our reputation and claims against us.

If we are unable to successfully expand our commercial operations, including hiring additional qualified sales representatives, application scientists, engineers, scientific personnel, and customer support staff, our business may be adversely affected.

Our future sales will depend, in large part, on our ability to develop and substantially expand our sales and applications scientist infrastructure, particularly as we enter into new markets, rollout new products and platforms and manage inbound interest from new customers. We sell our products through our direct sales force and field application scientists located in North America, the United Kingdom and Europe, and have field application scientists located in the Asia-Pacific region where sales are currently managed by distributors. Our sales and marketing efforts are targeted at pharmaceutical and biotechnology companies and academic institutions focused on cell engineering and drug discovery. To continue driving adoption of our products and to support our global brand, we will need to further expand our field sales and application scientist infrastructure by hiring additional, highly qualified sales representatives, field application scientists, engineers and scientific personnel and customer support staff, in addition to increasing our marketing efforts.

Identifying and recruiting qualified personnel globally with sufficient industry experience and training them requires significant time, expense and attention. If we provide inadequate training, fail to increase our sales and marketing capabilities or fail to develop broad brand awareness in our target markets in a cost-effective manner, our business may be harmed. In addition, if our efforts to expand do not generate a corresponding increase in revenue or result in a decrease in our operating margin, our financial results will be adversely impacted. If we are unable to hire, develop and retain talented sales personnel or if new sales personnel are unable to achieve desired productivity levels in a reasonable period of time, we may not be able to realize the expected benefits of this investment or increase our revenue.

Additionally, our highly specialized application scientists and scientific personnel work closely with researchers, clinicians and current and prospective customers to optimize and implement cell engineering methods, processes and applications to meet their specific needs. Hiring these highly skilled application scientists and scientific personnel is competitive due to the limited number of people available with the necessary scientific and technical backgrounds and ability to understand our products at a technical level, and training such individuals requires significant time, expense and attention. Furthermore, we face intense competition in the labor market for such highly skilled specialists from competitors in our industry, our customers and companies in other industries, particularly because of the recent rapid growth in the cell therapy field. To effectively support current and potential customers, we will need to hire, maintain, train and grow globally the number of our applications scientists and add to our customer support staff. If we are unable to maintain, attract, train or retain the number of qualified support personnel that our business needs, our business and prospects will suffer.

47

Table of Contents

If we are unable to expand or leverage the number of peer-reviewed articles published using data generated through the use of our products or otherwise increase brand awareness in our target markets, the demand for our products and our business may be adversely affected.

We rely on a significant base of peer-reviewed publications to showcase and validate the application of our technology in academic and clinical research settings. To date, there have been multiple peer-reviewed articles published, including in prominent journals, using data generated through the use of our technology across a wide range of key scientific research areas, including research, discovery, development and manufacturing of next-generation, cell-based therapeutics, as well as drug discovery including protein production for biological therapeutics, viral vectors, vaccines and small molecule discovery. We believe that expanding the number and breadth of these publications, and otherwise developing and maintaining awareness of our brand in our target markets in a cost-effective, manner is critical to achieving broad acceptance of our products and attracting new customers. Such publications and other brand promotion activities may not generate customer awareness or increase revenue and, even if they do, any increase in revenue may not offset the costs and expenses we incur in building our brand. If we fail to successfully promote, maintain and protect our brand, we may fail to attract or retain the customers necessary to realize a sufficient return on our brand-building efforts, or to achieve the reputation and widespread brand awareness that is critical for broad customer adoption of our products.

Risks Related to Our Regulatory Environment and Our Industry

Changes in tariffs or other government trade policies may materially adversely affect our business and results of operations, including by reducing demand for our products.

The imposition of tariffs and trade restrictions as a result of international trade disputes or changes in trade policies may adversely affect our sales and profitability. For example, in 2018 and 2019, the U.S. government imposed and proposed, among other actions, new or higher tariffs on specified imported products originating from China in response to what it characterized as unfair trade practices, and China responded by imposing and proposing new or higher tariffs on specified U.S. products. There can be no assurance that a broader trade agreement will be successfully negotiated between the United States and China to reduce or eliminate these tariffs. These tariffs, and the related geopolitical uncertainty between the United States and China, may cause decreased demand for our products or increase cost of components used in our products, which could have a material adverse effect on our business and results of operations. For example, certain of our foreign customers may respond to the imposition of tariffs or threat of tariffs on products we produce by delaying purchase orders or purchasing products from our competitors. Ongoing international trade disputes and changes in trade policies could also impact economic activity and lead to a general contraction of customer demand. In addition, tariffs on components that we may import from China or other nations will adversely affect our profitability unless we are able to exclude such components from the tariffs or we raise prices for our products, which may result in our products becoming less attractive relative to products offered by our competitors. Future actions or escalations by either the United States or China that affect trade relations may also negatively affect our business, or that of our suppliers or customers, and we cannot provide any assurances as to whether such actions will occur or the form that they may take. To the extent that our sales or profitability are negatively affected by any such tariffs or other trade actions, our business and results of operations may be materially adversely affected.

We are subject to governmental export controls that could impair our ability to compete in international markets due to licensing requirements and subject us to liability if we are not in compliance with applicable laws.

Exports of our products are subject to export controls and sanctions laws and regulations imposed by the U.S. government and administered by the U.S. Departments of State, Commerce, and Treasury. U.S. export control laws may require a license or other authorization to export products to certain destinations and end users. In addition, U.S. economic sanctions laws include restrictions or prohibitions on the sale or supply of certain products to U.S. embargoed or sanctioned countries, governments, persons and entities. Obtaining export licenses can be difficult, costly and time-consuming and we may not always be successful in obtaining necessary export licenses, and our failure to obtain required export approval for our products or limitations on our ability to export or sell our products imposed by export

48

Table of Contents

control or sanctions laws may harm our revenues and adversely affect our business, financial condition, and results of operations. Noncompliance with these laws could have negative consequences, including government investigations, penalties and reputational harm.

We are subject to stringent and changing obligations related to data privacy and security. Our actual or perceived failure to comply with such obligations could lead to regulatory investigations or actions; litigation; disruptions of our business operations; significant fines and penalties; reputational harm; loss of revenue or profits; loss of customers or sales; and other adverse business consequences.

In the ordinary course of business, we process personal data and other sensitive data, including proprietary and confidential business data, trade secrets, intellectual property, previously collected data about trial participants (company does not currently collect trial participant data) in connection with clinical trials that concluded in 2021, anonymized blood cell data, and sensitive third-party data collected under confidentiality with our customers and potential customers which may include scientific protocols and plans. Our data processing activities subject us to numerous data privacy and security obligations, such as various laws, regulations, guidance, industry standards, external and internal privacy and security policies, contracts, and other obligations that govern the processing of personal data by us and on our behalf. The regulatory framework for the collection, use, safeguarding, retention, disclosure, transfer and other processing of personal data worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. We may be subject to numerous federal, state, local and foreign laws, regulations, rules and standards, as well as associated industry standards, policies and contractual or other obligations, relating to the collection, use, retention, security, disclosure, transfer and other processing of personal data in the jurisdictions in which we operate, collectively, Data Protection Requirements.

In the United States, federal, state, and local governments have enacted numerous data privacy and security laws, including data breach notification laws, personal data privacy laws, and consumer protection laws. For example, the federal Health Insurance Portability and Accountability Act of 1996 (“HIPAA”), as amended by the Health Information Technology for Economic and Clinical Health Act (“HITECH”), imposes specific requirements relating to the privacy, security, and transmission of individually identifiable health information. In addition, the California Consumer Privacy Act of 2018 (“CCPA”) imposes obligations on businesses to which it applies. These obligations include, but are not limited to, providing specific disclosures in privacy notices and affording California residents certain rights related to their personal data. The CCPA allows for statutory fines for noncompliance (up to $7,500 per violation). In addition, it is anticipated that the California Privacy Rights Act of 2020 (“CPRA”), effective January 1, 2023, will expand the CCPA. For example, the CPRA establishes a new California Privacy Protection Agency to implement and enforce the CPRA, which could increase the risk of an enforcement action. Other states have enacted data privacy laws. For example, Virginia passed the Consumer Data Protection Act, and Colorado passed the Colorado Privacy Act, both of which differ from the CPRA and become effective in 2023. If we become subject to new data privacy laws, at the state level, the risk of enforcement action against us could increase because we may become subject to additional obligations, and the number of individuals or entities that can initiate actions against us may increase (including individuals, via a private right of action, and state actors). Data privacy and security laws have been proposed at the federal, state, and local levels in recent years, which could further complicate compliance efforts.

Outside the United States, an increasing number of laws, regulations, and industry standards apply to data privacy and security. For example, EU and UK GDPR impose strict requirements for processing the personal data of individuals. Under the EU GDPR, government regulators may impose temporary or definitive bans on data processing, as well as fines of up to €20 million /£17.5 million or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher. Further, individuals may initiate litigation related to our processing of their personal data.

Furthermore, the EU GDPR provides that EEA Member States may introduce specific requirements related to the processing of “special categories of personal data,” including personal data related to health and genetic information, which we may process in connection with clinical trials or otherwise. In the United Kingdom, the UK Data Protection Act 2018 complements the UK GDPR in this regard. This fact may lead to greater divergence on the law that applies to the processing of such personal data across the EEA and/or United Kingdom, which may increase our costs and overall compliance risk. We also target customers in Asia and have operations, distributors, contractors or employees located or

49

Table of Contents