Mayville Engineering Company, Inc. - Quarter Report: 2021 June (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-Q

(Mark One)

For the quarterly period ended June 30, 2021

OR

For the transition period from                      to                     

Commission File Number: 001-38894

Mayville Engineering Company, Inc.

(Exact Name of Registrant as Specified in its Charter)

Registrant’s telephone number, including area code: (920) 387-4500

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒

As of July 29, 2021, the registrant had 20,475,915 shares of common stock, no par value per share, outstanding.

Table of Contents

2

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

Certain matters discussed in this Quarterly Report on Form 10-Q contain forward-looking statements that involve risks and uncertainties, such as statements related to future events, business strategy, future performance, future operations, financial position, estimated revenues and losses, projected costs, prospects, plans and objectives of management. All statements other than statements of historical fact may be forward-looking statements. Forward-looking statements are often, but not always, identified by the use of words such as “seek,” “anticipate,” “plan,” “continue,” “estimate,” “expect,” “may,” “will,” “project,” “predict,” “potential,” “targeting,” “intend,” “could,” “might,” “should,” “believe” and similar expressions or their negative. Forward-looking statements should not be read as a guarantee of future performance or results, and will not necessarily be accurate indications of the times at, or by, which such performance or results will be achieved. Forward-looking statements are based on management’s belief, based on currently available information, as to the outcome and timing of future events. These statements involve estimates, assumptions, known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those expressed in such forward-looking statements. Mayville Engineering Company, Inc. (MEC, the Company, we, our, us or similar terms) believes the expectations reflected in the forward-looking statements contained in this Quarterly Report on Form 10-Q are reasonable, but no assurance can be given that these expectations will prove to be correct. Forward-looking statements should not be unduly relied upon.

Important factors that could cause actual results or events to differ materially from those expressed in forward-looking statements include, but are not limited to, those described in “Risk Factors” in Part I, Item 1A of our Annual Report on Form 10-K for the year ended December 31, 2020, filed with the Securities and Exchange Commission (the SEC) on March 5, 2021, as such, may be amended or supplemented in Part II, Item 1A of our subsequently filed Quarterly Reports on Form 10-Q (including this report) and the following:

These factors are not necessarily all of the important factors that could cause actual results or events to differ materially from those expressed in forward-looking statements. Other unknown or unpredictable factors could also cause actual results or events to differ materially from those expressed in the forward-looking statements. All forward-looking statements attributable to us are qualified in their entirety by this cautionary statement. Forward-looking statements speak only as of the date hereof. We undertake no obligation to update or revise any forward-looking statements after the date on which any such statement is made, whether as a result of new information, future events or otherwise, except as required by federal securities laws.

3

PART I—FINANCIAL INFORMATION

Item 1. Financial Statements.

Mayville Engineering Company, Inc. and Subsidiaries

Condensed Consolidated Balance Sheets

(in thousands, except share amounts)

(unaudited)

The accompanying notes are an integral part of these Condensed Consolidated Financial Statements.

4

Mayville Engineering Company, Inc. and Subsidiaries

Condensed Consolidated Statements of Comprehensive Income (Loss)

(in thousands, except share amounts and per share data)

(unaudited)

The accompanying notes are an integral part of these Condensed Consolidated Financial Statements.

5

Mayville Engineering Company, Inc. and Subsidiaries

Condensed Consolidated Statements of Cash Flows

(in thousands)

(unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

6

Mayville Engineering Company, Inc. and Subsidiaries

Condensed Consolidated Statements of Shareholders’ Equity

(in thousands)

(unaudited)  

The accompanying notes are an integral part of these Condensed Consolidated Financial Statements.

7

Mayville Engineering Company, Inc. and Subsidiaries

Notes to Unaudited Condensed Consolidated Financial Statements

(in thousands except share amounts, per share data, years and ratios)

(unaudited)

Note 1. Basis of presentation

The interim unaudited consolidated financial statements of Mayville Engineering Company, Inc. and subsidiaries (MEC, the Company, we, our, us or similar terms) presented here have been prepared in accordance with the accounting principles generally accepted in the United States of America (GAAP) and with instructions to Form 10-Q and Article 10 of Regulation S-X. They reflect all adjustments which are, in the opinion of management, necessary for a fair presentation of the results of operations and financial position for the interim unaudited periods presented. All intercompany balances and transactions have been eliminated in consolidation.

Certain information and footnote disclosures normally included in financial statements prepared in accordance with GAAP have been condensed or omitted. These interim unaudited Condensed Consolidated Financial Statements should be read in conjunction with the Company’s consolidated financial statements and notes thereto for the year ended December 31, 2020, included in the Company’s Annual Report on Form 10-K. A summary of the Company’s significant accounting policies is included in the Company’s 2020 financial statements in the Annual Report on Form 10-K. The Company followed these policies in preparation of the interim unaudited Condensed Consolidated Financial Statements.

Nature of Operations

MEC is a leading U.S.-based value-added manufacturing partner that provides a broad range of prototyping and tooling, production fabrication, coating, assembly and aftermarket components. Our customers operate in diverse end markets, including heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture, military, fitness equipment and other end markets. Along with process engineering and development services, MEC maintains an extensive manufacturing infrastructure with 19 facilities across seven states. These facilities make it possible to offer conventional and computer numerical control (CNC) stamping, shearing, fiber laser cutting, forming, drilling, tapping, grinding, tube bending, machining, welding, assembly and logistic services. MEC also possesses a broad range of finishing capabilities including shot blasting, e-coating, powder coating, wet spray and military grade chemical agent resistant coating (CARC) painting.

Our one operating segment focuses on producing metal components that are used in a broad range of heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agricultural, military, fitness equipment and other products.

COVID-19 has had and will continue to have a negative impact on our business, financial condition, cash flows, results of operations and supply chain, although the full extent is still uncertain.

Recent Accounting Pronouncements

In February 2016, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2016-02, Leases, creating Topic 842, which requires lessees to record the assets and liabilities arising from all leases in the statement of financial position. Under ASU 2016-02, lessees will recognize a liability for lease payments and a right-of-use asset. When measuring assets and liabilities, a lessee should include amounts related to option terms, such as the option of extending or terminating the lease or purchasing the underlying asset, that are reasonably certain to be exercised. For leases with a term of 12 months or less, lessees are permitted to make an accounting policy election to not recognize lease assets and liabilities. This guidance retains the distinction between finance leases and operating leases and the classification criteria remains similar to existing guidance. For financing leases, a lessee will recognize the interest on a lease liability separate from amortization of the right-of-use asset. In addition, repayments of principal will be presented within financing activities, and interest payments will be presented within operating activities in the statement of cash flows. For operating leases, a lessee will recognize a single lease cost on a straight-line basis and classify all cash payments within operating activities in the statement of cash flows. For public companies, this guidance will be effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. For as long as the Company remains an “emerging growth company” (EGC), the new guidance is effective for annual reporting periods beginning after December 15, 2021, and interim periods within fiscal years beginning after December 15, 2022. Early adoption is permitted. The Company is evaluating the potential impact of this guidance on the consolidated financial statements.

In December 2019, the FASB issued ASU 2019-12, Income Taxes, creating Topic 740, which removes certain exceptions for recognizing deferred taxes for investments, performing intra-period allocation, and calculating income taxes in interim periods. The ASU also adds guidance to reduce complexity in certain areas, including recognizing deferred taxes for tax goodwill and allocating taxes to members of a consolidated group. For public companies, this guidance will be effective for fiscal years beginning after December 15, 2020. For as long as the Company remains an EGC, the new guidance is effective for annual reporting periods

8

beginning after December 15, 2021, and interim periods within fiscal years beginning after December 15, 2022. During the period ended March 31, 2021, the Company adopted this guidance. This adoption had no impact on the financial statements.

A summary of the Company’s evaluation of other recent accounting pronouncements is included in the Company’s 2020 financial statements in its Annual Report on Form 10-K for the year ended December 31, 2020.

Note 2. Select balance sheet data

Inventory

Inventories are stated at the lower of cost, determined on the first-in, first-out method (FIFO) and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. Work-in-process and finished goods are valued at production costs consisting of material, labor, and overhead.

Inventories as of June 30, 2021 and December 31, 2020 consist of:

Property, plant and equipment

Property, plant and equipment as of June 30, 2021 and December 31, 2020 consist of:

The Company completed the closure of its Greenwood, SC manufacturing facility during the third quarter of the prior year. The net amount of property, plant and equipment associated with the facility was $3,552, which is classified in assets held for sale on the Condensed Consolidated Balance Sheets as of June 30, 2021 and December 31, 2020.

Additionally, the Company finalized an agreement to open a new facility in Hazel Park, MI during the quarter ended June 30, 2021. As of June 30, 2021, the Company invested $5,271 for the ramp-up of production which is classified in construction in progress.

Goodwill

Changes in goodwill between December 31, 2020 and June 30, 2021 consist of:

9

 Intangible Assets

The following is a listing of intangible assets, the useful lives in years (amortization period) and accumulated amortization as of June 30, 2021 and December 31, 2020:

Non-amortizable brand name is tested annually for impairment.

Changes in intangible assets between December 31, 2020 and June 30, 2021 consist of:

Amortization expense was $2,677 for each of the three months ended June 30, 2021 and 2020, and $5,353 for the six months ended June 30, 2021 and 2020.

Future amortization expense is expected to be as followed:

Note 3. Bank revolving credit notes

On September 26, 2019, and as last amended on March 31, 2021, we entered into an amended and restated credit agreement (Credit Agreement) with certain lenders and Wells Fargo Bank, National Association, as administrative agent (the Agent). The Credit Agreement provides for a $200,000  revolving credit facility (the Revolving Loan), with a letter of credit sub-facility in an aggregate amount not to exceed $5,000, and a swingline facility in an aggregate amount of $20,000. The Credit Agreement also provides for an additional $100,000 of debt capacity through an accordion feature. All amounts borrowed under the Credit Agreement mature on September 26, 2024.

The Credit Agreement contains usual and customary negative covenants for agreements of this type, including, but not limited to, restrictions on our ability to, subject to certain exceptions, create, incur or assume indebtedness, create or incur liens, make certain investments, merge or consolidate with another entity, make certain asset dispositions, pay dividends or other distributions to shareholders, enter into transactions with affiliates, enter into sale leaseback transactions or make capital expenditures. The Credit Agreement also requires us to satisfy certain financial covenants, including a minimum interest coverage ratio of 3.00 to 1.00 as well as a consolidated total leverage ratio not to exceed 3.25 to 1.00, although such leverage ratio can be increased in connection with certain acquisitions.

10

In order to provide a means of insurance against future macroeconomic events, we entered into an amendment (Second Amendment) to the Credit Agreement on June 30, 2020. The Second Amendment provides the Company with temporary changes to the total leverage ratio covenant for the period from June 30, 2020, through December 31, 2021, or such earlier date as the Company may elect (Covenant Relief Period), in return for certain increases in interest rates, fees and restrictions on certain activities of the Company, including capital expenditures, acquisitions, dividends and share repurchases. New pricing, which takes effect for the quarters ending on and after September 30, 2020, includes interest at a fluctuating London Interbank Offered Rate (LIBOR) (at a floor of 75 basis points), plus 1.00% to 2.75%, along with the commitment fee ranging from 20 to 50 basis points.

During the Covenant Relief Period, the required ceiling on the Company’s total leverage ratio will be 4.25 to 1.00 for quarters ending June 30, 2020 through and including December 31, 2020, and will decline in quarterly increments to 3.25 to 1.00 through the quarter ending December 31, 2021.

Due to our recently announced relationship with a strategic new customer, we entered into an amendment (Third Amendment) to the Credit Agreement on March 31, 2021. The Third Amendment allows the Company to incur up to $70,000 of capital expenditures in 2021, as opposed to $35,000.

At June 30, 2021, our consolidated total leverage ratio was 1.00 to 1.00 as compared to a covenant maximum of 3.75 to 1.00 in accordance with the Second Amendment of the Credit Agreement.

At June 30, 2021, our interest coverage ratio was 15.24 to 1.00 as compared to a covenant minimum of 3.00 to 1.00 under the Credit Agreement.

Under the Credit Agreement, interest is payable quarterly at the adjusted LIBOR plus an applicable margin based on the current funded indebtedness to adjusted EBITDA ratio. The interest rate was 2.25% and 2.50% as of June 30, 2021 and December 31, 2020, respectively. Additionally, the agreement has a fee on the average daily unused portion of the aggregate unused revolving commitments. This fee was 0.25% and 0.20% as of June 30, 2021 and December 31, 2020, respectively.

The Company was in compliance with all financial covenants of its credit agreements as of June 30, 2021 and December 31, 2020. The amount borrowed on the revolving credit notes was $43,854 and $45,257 as of June 30, 2021 and December 31, 2020, respectively.

Note 4. Capital lease obligation

Capital leases consist of equipment with a capitalized cost of $3,847 and $3,825 and accumulated depreciation of $1,569 and $1,245 at June 30, 2021 and December 31, 2020, respectively. Depreciation of $163 and $324 was recognized on the capital lease assets during the three- and six months ended June 30, 2021, respectively, and $161 and $322 during the three- and six months ended June 30, 2020, respectively. Non-cash capital lease transactions amounted to $0 for the three- and six months ended June 30, 2021 and 2020. Future minimum lease payments required under the lease are as follows:

Note 5. Operating lease obligation

Operating leases relate to property, plant and equipment. Future minimum lease payments required under the leases are as follows:

11

The Company leases certain office space, warehousing facilities, equipment and vehicles under operating lease arrangements with third-party lessors. These lease arrangements expire at various times through August 2031. Total rent expense under the arrangements was approximately $1,081 and $1,094 for the three months ended June 30, 2021 and 2020, respectively, and $2,165 and $2,155 for the six months ended June 30, 2021 and 2020, respectively.

Note 6. Employee stock ownership plan

Under the Mayville Engineering Company, Inc. Employee Stock Ownership Plan (the ESOP), the Company can make annual discretionary contributions to the trust for the benefit of eligible employees in the form of cash or shares of common stock of the Company subject to the board of directors’ approval. For the three months ended June 30, 2021 and 2020, the Company’s estimated ESOP expense was $228 and income of $675, respectively. For the six months ended June 30, 2021 and 2020, the Company’s estimated ESOP expense amounted to $701 and $0, respectively.

At various times following death, disability, retirement or termination of employment, an ESOP participant is entitled to receive their ESOP account balance in accordance with various distribution methods as permitted under the policies adopted by the ESOP.

As of June 30, 2021, and December 31, 2020, the ESOP shares, excluding safe harbor shares held in the Company’s 401(k) plan, consisted of 7,292,392 and 8,253,533 in allocated shares, respectively.

Note 7. Retirement plans

The Mayville Engineering Company Inc. 401(k) Plan (the 401(k) Plan) covers substantially all employees meeting certain eligibility requirements. The 401(k) Plan is a defined contribution plan and is intended for eligible employees to defer tax-free contributions to save for retirement. Employees may contribute up to 50% of their eligible compensation to the 401(k) Plan, subject to the limits of Section 401(k) of the Internal Revenue Code.

The 401(k) Plan also provides for employer discretionary profit-sharing contributions and the Board of Directors may authorize discretionary profit-sharing contributions (which are usually approved at the end of each calendar year).

Note 8. Income taxes

On a quarterly basis, the Company estimates its effective tax rate for the full fiscal year and records a quarterly income tax provision based on the anticipated rate. As the year progresses, the Company will refine its estimate based on facts and circumstances by each tax jurisdiction.

Income tax expense was $1,007 and $1,996, and the effective tax rate (ETR) from continuing operations was 23.43% and 25.48% for the three and six months ended June 30, 2021, respectively. Our ETR is different from the expected tax rate due to state taxes, non-deductible items, research and development credits and benefit from excess tax deductions related to share based compensation items.

For the three and six months ended June 30, 2020, income tax benefit was estimated at $2,525 and $1,834 and the ETR from continuing operations was 27.69% and 28.77% respectively.

The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax laws and regulations in these jurisdictions. Accounting Standards Codification (ASC) Topic 740, Income Taxes, states that a tax benefit from an uncertain tax position may be recognized when it is more likely than not that the position will be sustained upon examination, including resolutions of any related appeals or litigation processes, on the basis of technical merits.

12

The Company’s policy for recording interest and penalties associated with potential income tax audits is to record such expense as a component of income tax expense (benefit). There were no amounts for penalties or interest recorded as of June 30, 2021. Management is currently unaware of any issues under review that could result in significant payments, accruals or material deviations from its positions.

Uncertain Tax Positions

Based on the Company’s evaluation, it has been concluded that there is one tax position related to the research and development tax credit requiring recognition in the Company’s financial statements as of June 30, 2021. The Company does not anticipate that there will be a material change in the balance of the unrecognized tax benefits in the next twelve months. Any interest and penalties related to uncertain tax positions are recorded in income tax expense. No amounts have been recorded as tax expense for interest and penalties for the three months ended June 30, 2021, as the amount for the utilized portion for the research and development credit on the Wisconsin return is considered to be immaterial. At June 30, 2021 and December 31, 2020, a total of $307 and $208, respectively, of unrecognized tax benefits would, if recognized, impact the Company’s ETR.

The Company files income tax returns in the United States federal jurisdiction and in various state and local jurisdictions. Federal tax returns for tax years beginning January 1, 2017, and state tax returns beginning January 1, 2016, are open for examination.

Note 9. Contingencies

From time to time, the Company may be involved in various claims and lawsuits, both for and against the Company, arising in the normal course of business. Although the results of litigation and claims cannot be predicted with certainty, in management’s opinion, either the likelihood of loss is remote, or any reasonably possible loss associated with the resolution of such proceedings is not expected to have a material adverse impact on the consolidated financial statements.

Note 10. Deferred compensation

The Mayville Engineering Deferred Compensation Plan is available for certain employees designated to be eligible to participate by the Company and approved by the Board of Directors. Eligible employees may elect to defer a portion of his or her compensation for any plan year and the deferral cannot exceed 50% of the participant’s base salary and may include the participant’s annual short-term cash incentive up to 100%. The participant’s election must be made prior to the first day of the plan year.

 An employer contribution will be made for each participant to reflect the amount of any reduced allocations to the ESOP and/or 401(k) employer contributions due solely to the participant’s deferral amounts, as applicable. In addition, a discretionary amount may be awarded to a participant by the Company.

Deferrals are assumed to be invested in an investment vehicle based on the options made available to the participant (which does not include Company stock).

The deferred compensation plan provides benefits payable upon separation of service or death. Payments are to be made 30 days after date of separation from service, either in a lump-sum payment or up to five annual installments as elected by the participant when the participant first elects to defer compensation.

The deferred compensation plan is non-funded, and all future contributions are unsecured in that the employees have the status of a general unsecured creditor of the Company and the agreements constitute a promise by the Company to make benefit payments in the future. During the three months ended June 30, 2021 and 2020, eligible employees elected to defer compensation of $0 and $12, respectively. During the six months ended June 30, 2021 and 2020, eligible employees elected to defer compensation of $0 and $41, respectively. As of June 30, 2021, and December 31, 2020, the total amount accrued for all benefit years under this plan was $25,461 and $25,631, respectively, which is included within the deferred compensation and long-term incentive on the Condensed Consolidated Balance Sheets. These amounts include the initial deferral of compensation as adjusted for (a) subsequent changes in the share value of the Company stock or (b) in the investment options chosen by the participants. Total expense for the deferred compensation plan for the three months ended June 30, 2021 and 2020 amounted to $575 and $586, respectively. Total (income) expense for the deferred compensation plan for the six months ended June 30, 2021 and 2020 amounted to $405 and $(21), respectively These expenses are included in profit sharing, bonuses and deferred compensation on the Condensed Consolidated Statements of Comprehensive Income (Loss).

Note 11. Self-Funded insurance

The Company is self-funded for the medical benefits provided to its employees and their dependents. Healthcare costs are expensed as incurred and are based upon actual claims paid, reinsurance premiums, administration fees, and estimated unpaid claims.

13

As of March 31, 2020, the Company consolidated benefit plans with no specific stop loss and an aggregate stop loss to limit risk. Expense related to this contract is approximately $3,290 and $5,411 for the three months ended June 30, 2021 and 2020, respectively, and $7,011 and $11,135 for the six months ended June 30, 2021 and 2020, respectively. An estimated accrued liability of approximately $1,262 and $1,721 was recorded as of June 30, 2021 and December 31, 2020, respectively, for estimated unpaid claims and is included within other current liabilities on the Condensed Consolidated Balance Sheets.

Note 12. Segments

The Company applies the provisions of ASC Topic 280, Segment Reporting. An operating segment is defined as a component that engages in business activities whose operating results are reviewed by the chief operating decision maker and for which discrete financial information is available. Based on the provisions of ASC 280, the Company has determined it has one operating segment. The Company does not earn revenues or have long-lived assets located in foreign countries.

Note 13. Fair value of financial instruments

Fair value provides information on what the Company may realize if certain assets were sold or might pay to transfer certain liabilities based upon an exit price. Financial assets and liabilities that are measured and reported at fair value are classified into a three-level hierarchy that prioritizes the inputs used in the valuation process. A financial instrument’s categorization within the valuation hierarchy is based on the lowest level of any input that is significant to the fair value measurement. The hierarchy is based on the observability and objectivity of the pricing inputs as follows:

The following table lists the Company’s financial assets and liabilities accounted for at fair value by the fair value hierarchy:

Fair value measurements for the Company’s cash and cash equivalents are classified based upon Level 1 measurements because such measurements are based upon quoted market prices in active markets for identical assets.

Accounts receivable, accounts payable, long-term debt and accrued liabilities are recorded in the financial statements at cost and approximate fair value.

Deferred compensation liabilities are recorded at amounts due to participants at the time of deferral. Deferrals are invested in an investment vehicle based on the options made available to the participant, considered to be Level 1 and Level 2 on the fair value hierarchy, with the majority of the balance as Level 1. The change in fair value is recorded in the Profit sharing, bonuses, and deferred

14

compensation line item on the Condensed Consolidated Statements of Comprehensive Income (Loss). The balance due to participants is reflected on the deferred compensation and long-term incentive line item on the Condensed Consolidated Balance Sheets.

The Company’s non-financial assets such as intangible assets and property, plant, and equipment are re-measured at fair value when there is an indication of impairment and adjusted only when an impairment charge is recognized.

Note 14. Earnings Per Share

The Company computes earnings per share in accordance with ASC Topic 260, Earnings per Share. In accordance with ASC 260, outstanding options will be considered to have been exercised and outstanding as of the beginning of the period if the average market price of the common stock during the period exceeds the exercise price of the options (they are “in the money”), and the assumed exercise of the options do not have an anti-dilutive impact on earnings per share.

Options in the money that were not included in the computation of diluted earnings per share because they would have had an anti-dilutive impact on earnings per share were as follows:

Note 15. Revenue Recognition

Contract Assets and Contract Liabilities

The Company has contract assets and contract liabilities, which are included in other current assets and other current liabilities on the Condensed Consolidated Balance Sheet, respectively. Contract assets include products where the Company has satisfied its performance obligation, but receipt of payment is contingent upon delivery. Contract liabilities include deferred tooling revenue, where the performance obligation was not met. The performance obligation is satisfied when the tooling is completed and the customer signs off through the Product Part Approval Process (PPAP). Cost of goods sold is recognized and released from the balance sheet when control of the tooling promised under contract is transferred to the customer either at a point in time or over a period of time.

The Company’s contracts with customers are short-term in nature; therefore, revenue is typically recognized, billed and collected within a 12-month period. The following table reflects the changes in our contract assets and liabilities during the six months ended June 30, 2021.

Disaggregated Revenue

The following table represents a disaggregation of revenue by product category:

15

Note 16. Concentration of major customers

The following customers accounted for 10% or greater of the Company’s recorded net sales and net trade receivables:

Note 17. Stock based compensation

The Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan provides the Company the ability to grant monetary payments based on the value of its common stock, up to 2,000,000 shares.

On April 20, 2021, shareholders of the Company approved an amendment to the 2019 Omnibus Incentive Plan increasing the number of shares of common stock authorized for issuance by 2,500,000 shares.

The Company recognizes stock-based compensation using the fair value provisions prescribed by ASC Topic 718, Compensation – Stock Compensation. Accordingly, compensation costs for awards of stock-based compensation settled in shares are determined based on the fair value of the share-based instrument at the time of grant and are recognized as expense over the vesting period of the share-based instrument. For units, fair value is equivalent to the stock price at the date of grant. The Black-Scholes option pricing model is utilized to determine fair value for options.

Cancellations and forfeitures are accounted for as incurred.

Stock awards were granted on June 3, 2021, May 12, 2021, April 20, 2021, February 28, 2021, May 12, 2020, February 27, 2020 and May 8, 2019. There were no stock awards granted prior to this.

During the six months ended June 30, 2021, 314,902 units vested. For the same period, 484,661 options vested with a weighted average strike price of $11.23. There were 125,414 options vested for the six months ended June 30, 2020.

As of June 30, 2021, 1,129,487 options remained outstanding with a weighted average strike price of $11.08 and a weighted average contractual life of 8.88 years remaining.

The Company’s stock-based compensation expense by award type is summarized as follows:

16

One-time IPO unit awards were fully expensed as of December 31, 2020.

A rollforward of unrecognized stock-based compensation expense is displayed in the table below. Unrecognized stock-based compensation expense as of June 30, 2021 will be expensed over the remaining requisite service period from which individual award values relate, up to February 28, 2023.

Note 18. Greenwood Facility Closure and Restructuring

Based on the Company’s investments in new technology and automation, which have resulted in a smaller footprint requirement to maintain manufacturing capacity, the Company announced it would be closing its Greenwood, SC facility on May 6, 2020. The facility closure was finalized during the third quarter of 2020 with all customer components re-distributed among five other MEC manufacturing facilities. All customer relationships and manufactured components were maintained through this transition without disruption to our customers.

Costs associated with the closure are being accounted for in accordance with ASC 420 Exit or Disposal Cost Obligations.

For the three and six months ended June 30, 2021, the Company incurred $0 costs associated with the facility closure and restructuring. For the three and six months ended June 30, 2020, the Company incurred $1,838 of total costs. These costs were recognized on the cost of sales line item of the Condensed Consolidated Statements of Comprehensive Income (Loss), including $844 for the loss on the sale of manufacturing equipment that was not being transferred to another MEC facility, $231 for severance and retention bonus, $638 for the increase to the excess and obsolete inventory reserve for the inventory the Company planned to dispose of and $125 mostly related to costs to close this facility and relocate equipment to other facilities.

As a result of the Greenwood facility closure, future earnings and cash flows will no longer be impacted by the depreciation associated with the assets disposed of or the facility, maintenance costs of the facility, and facility personnel expenses.

Assets disposed of had a net book value of $2,475 with a remaining useful life of approximately 3 years resulting in approximately $825 of annual depreciation expense that will no longer be incurred. The facility has a net book value of $3,552 as of June 30, 2021 with a remaining weighted average useful life of approximately 27 years resulting in approximately $133 of annual depreciation expense that will no longer be incurred.

Additionally, the Company will no longer have approximately $800 of annual facility maintenance costs.

Total personnel costs associated with the facility were approximately $2,250 for the first quarter 2020 resulting in approximately $9,000 of annual personnel expenses; the majority of these costs were transitioned to five other MEC facilities that are now manufacturing these components. As previously mentioned, all customer relationships and manufacturing programs were retained through the transition.

The aforementioned depreciation, maintenance costs, and personnel expenses associated with the Greenwood facility have been classified as cost of sales on the Condensed Consolidated Statements of Comprehensive Income (Loss).

Note 19. Subsequent events

The Company evaluated events and transactions for potential recognition or disclosure in the interim unaudited Condensed Consolidated Financial Statements through August 4, 2021, the date on which the interim unaudited Condensed Consolidated Financial Statements were available to be issued.

17

On July 1, 2021, the Company entered into a new contractual agreement to sell the Greenwood, SC manufacturing facility for $5,300 before commissions and fees. Finalization of the contract is contingent upon a 30-day due diligence period, that may be extended for an additional 15 days, upon written notice from the purchaser.

18

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Management’s Discussion and Analysis of Financial Condition and Results of Operations is intended to assist in the understanding and assessing the trends and significant changes in our results of operations and financial condition. Historical results may not be indicative of future performance. This discussion includes forward-looking statements that reflect our plans, estimates and beliefs. Such statements involve risks and uncertainties. Our actual results may differ materially from those contemplated by these forward-looking statements as a result of various factors, including those set forth in “Risk Factors” in Part I, Item 1A of our Annual Report on Form 10-K for the year ended December 31, 2020 and “Cautionary Statement Regarding Forward-Looking Statements” and “Risk Factors” in Part II Item 1A. of this Quarterly Report on Form 10-Q. This discussion should be read in conjunction with our audited consolidated financial statements and the notes thereto included in our Annual Report on Form 10-K for the year ended December 31, 2020 and our unaudited condensed consolidated financial statements and the notes thereto included in Part I, Item I of this Quarterly Report on Form 10-Q. In this discussion, we use certain non-GAAP financial measures. Explanation of these non-GAAP financial measures and reconciliation to the most directly comparable GAAP financial measures are included in this Management Discussion and Analysis of Financial Condition and Results of Operations. Investors should not consider non-GAAP financial measures in isolation or as substitutes for financial information presented in compliance with GAAP.

All amounts are presented in thousands except share amounts, per share data, years and ratios.

Overview

MEC is a leading U.S.-based value-added manufacturing partner that provides a broad range of prototyping and tooling, production fabrication, coating, assembly and aftermarket components. Our customers operate in diverse end markets, including heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture, military, fitness equipment and other end markets. We have developed long-standing relationships with our blue-chip customers based upon a high level of experience, trust and confidence.

Our one operating segment focuses on producing metal components that are used in a broad range of heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agricultural, military, fitness equipment and other products.

COVID-19 Impact

COVID-19 has had and will continue to have a negative impact on our business, financial condition, cash flows, and results of operations, although the full extent is still uncertain.

For the three and six months ended June 30, 2021, net sales reflected the supply chain issues encountered by original equipment manufacturers’ that led to lower production demand at times, which can be directly attributed to microchip shortages in the commercial vehicle market and port issues that impacted nearly all end markets served.

The future financial effects of COVID-19 are unknown due to many factors. These factors include the uncertainty of the new Delta variant, uncertainty of the effectiveness of governmental actions to address COVID-19, including health, monetary and fiscal policies, the effect of elevated levels of sovereign and state debt, capital market disruptions, changes in demand and pricing, trade agreements, other geopolitical events, and the availability and volatility in the price of raw materials and other commodities. As a result, predicting the Company’s forecasted financial performance is difficult and subject to many assumptions.

The Company’s first priority has been to safeguard the health and well-being of its employees while fulfilling its obligations as an essential business serving its customer base. This proactive approach has kept employees safe and production facilities operational based on customer demand. Our goal is to continue to successfully manage through the effects of COVID-19 and strengthen our position serving customers in the future.

How We Assess Performance

Net Sales. Net sales reflect sales of our components and products net of allowances for returns and discounts. In addition to COVID-19, several factors affect our net sales in any given period, including general economic conditions, weather, timing of acquisitions and the production schedules of our customers. Net sales are recognized at the time of shipment to the customer.

Manufacturing Margins. Manufacturing margins represent net sales less cost of sales. Cost of sales consists of all direct and indirect costs used in the manufacturing process, including raw materials, labor, equipment costs, depreciation, lease expenses, subcontract costs and other directly related overhead costs. Our cost of sales is directly affected by the fluctuations in commodity

19

prices, primarily sheet steel and aluminum, but these changes are largely mitigated by contractual agreements with our customers that allow us to pass through these price changes based upon certain market indexes.

Depreciation and Amortization. We carry property, plant and equipment on our balance sheet at cost, net of accumulated depreciation and amortization. Depreciation on property, plant and equipment is computed on a straight-line basis over the estimated useful life of the asset. Amortization expense is the periodic expense related to leasehold improvements and intangible assets. Leasehold improvements are amortized over the lesser of the life of the underlying asset or the remaining lease term. Our intangible assets were recognized as a result of certain acquisitions and are generally amortized on a straight-line basis over the estimated useful lives of the assets.

Other Selling, General, and Administrative Expenses. Other selling, general and administrative expenses consist primarily of salaries and personnel costs for our sales and marketing, finance, human resources, information systems, administration and certain other managerial employees and certain corporate level administrative expenses such as incentive compensation, audit, accounting, legal and other consulting and professional services, travel, and insurance.

Other Key Performance Indicators

EBITDA, EBITDA Margin, Adjusted EBITDA and Adjusted EBITDA Margin

EBITDA represents net income (loss) before interest expense, provision (benefit) for income taxes, depreciation and amortization. EBITDA Margin represents EBITDA as a percentage of net sales for each period.

Adjusted EBITDA represents EBITDA before stock-based compensation expenses and restructuring expenses related to the closure of the Greenwood facility. Adjusted EBITDA Margin represents Adjusted EBITDA as a percentage of net sales for each period. These metrics are supplemental measures of our operating performance that are neither required by, nor presented in accordance with, GAAP. These measures should not be considered as an alternative to net income (loss) or any other performance measure derived in accordance with GAAP as an indicator of our operating performance. We present Adjusted EBITDA and Adjusted EBITDA Margin as management uses these measures as key performance indicators, and we believe they are measures frequently used by securities analysts, investors and other parties to evaluate companies in our industry. These measures have limitations as analytical tools and should not be considered in isolation or as substitutes for analysis of our results as reported under GAAP.

Our calculation of EBITDA, EBITDA Margin, Adjusted EBITDA and Adjusted EBITDA Margin may not be comparable to the similarly named measures reported by other companies. Potential differences between our measures of EBITDA and Adjusted EBITDA compared to other similar companies’ measures of EBITDA and Adjusted EBITDA may include differences in capital structure and tax positions.

The following table presents a reconciliation of net income (loss), the most directly comparable measure calculated in accordance with GAAP, to Adjusted EBITDA, and the calculation of Adjusted EBITDA Margin for each of the periods presented.

20

Consolidated Results of Operations

Three Months Ended June 30, 2021 Compared to Three Months Ended June 30, 2020

Net Sales. Net sales were $120,213 for the three months ended June 30, 2021 as compared to $62,582 for the three months ended June 30, 2020, an increase of $57,631, or 92.1%. This change is primarily attributed to increasing sales volumes due to the continued improvement of market conditions in the current period and the impact of customer plant shutdowns caused by COVID-19 during the prior year period.

Manufacturing Margins. Manufacturing margins were $16,280 for the three months ended June 30, 2021 as compared to a loss of $1,154 for the three months ended June 30, 2020, an increase of $17,434, or 1,510.7%. The increase was driven by the aforementioned sales volume increases in the current period coupled with the utilization of the Company’s investments in new technology and automation. In addition, reduced overhead costs following the closure of the Greenwood, SC facility in 2020 resulted in a significant improvement in absorbed manufacturing overhead costs in the current period, and $429 related to the reversal of inventory obsolescence and healthcare reserves specific to the estimated potential impacts of COVID-19. This was offset by the lag in contractual raw material price increases passed through to customers in the current period. The Company incurred approximately $100 in launch costs related to the new Hazel Park, MI facility for our new customer in the fitness equipment market. Additionally, the prior year period included $1,838 of restructuring costs charged to cost of sales related to the Greenwood facility closure.

Manufacturing margin percentages were 13.5% for the three months ended June 30, 2021, as compared to a negative 1.8% for the three months ended June 30, 2020, an increase of 1,510.7%. This percentage change was attributable to the items discussed above.

Amortization of Intangibles Expense. Amortization of intangibles expense was $2,677 for both the three months ended June 30, 2021 and 2020.

Profit Sharing, Bonuses and Deferred Compensation Expenses. Profit sharing, bonuses, and deferred compensation expenses were $3,210 for the three months ended June 30, 2021 as compared to $1,194 for the three months ended June 30, 2020, an increase of $2,016, or 168.8%. This change was primarily driven by the return of normalized discretionary employer 401(k) and bonus accruals as business activity and sales volumes move towards pre-pandemic levels.

Employee Stock Ownership Plan (Income) Expense. Employee stock ownership plan estimated expense was $228 for the three months ended June 30, 2021 as compared to income of $675 for the three months ended June 30, 2020, an increase of $903, or 133.8%. The change is due to the discretionary nature of contributions to the ESOP plan and the decision made in the prior year period to eliminate the discretionary accrual for the fiscal year 2020 as a result of lower forecasted financial performance due to the impacts of COVID-19.

Other Selling, General and Administrative Expenses. Other selling, general and administrative expenses were $5,362 for the three months ended June 30, 2021 as compared to $4,552 for the three months ended June 30, 2020, an increase of $810, or 17.8%. The increase was principally driven by higher salary and payroll expenses in the current period as well as higher travel and entertainment expenses, which were artificially low in the prior year period due to the COVID-19 pandemic.

21

Interest Expense. Interest expense was $504 for the three months ended June 30, 2021 as compared to $637 for the three months ended June 30, 2020, a decrease of $133, or 20.9%. The change is due to lower debt levels in the current period and comparative interest rates in the prior year period.

Provision (Benefit) for Income Taxes. Income tax expense was $1,007 for the three months ended June 30, 2021 as compared to income tax benefit of $2,525 for the three months ended June 30, 2020. Please reference Note 8 of the Condensed Consolidated Financial Statements for more specifics. As of June 30, 2021, our federal operating loss (NOL) carryforward was $11,833 driven by the pretax losses incurred in the prior years. The NOL does not expire and will be used to offset future pretax income. We estimate our long-term effective tax rate to be approximately 26%, based on current tax regulations.

Net Income (Loss) and Comprehensive Income (Loss). Net income and comprehensive income were $3,292 for the three months ended June 30, 2021 as compared to a loss of $7,014 for the three months ended June 30, 2020. The increase of $10,306 was due to the previously discussed items.

EBITDA and EBITDA Margin. EBITDA and EBITDA Margin were $12,641 and 10.5%, respectively, for the three months ended June 30, 2021 as compared to negative $743 and negative 1.2%, respectively, for the three months ended June 30, 2020. The $13,384 increase in EBITDA was primarily due to the increase in net sales caused by the aforementioned increase in sales volumes, improved manufacturing overhead absorption costs due to the utilization of our investments in new technology and automation and reduction in overhead costs from the closure of the Greenwood, SC facility in 2020, and the adverse impacts of COVID-19 in the prior period.

Adjusted EBITDA and Adjusted EBITDA Margin. Adjusted EBITDA and Adjusted EBITDA Margin were $14,029 and 11.7%, respectively, for the three months ended June 30, 2021, as compared to $2,254 and 3.6%, respectively, for the three months ended June 30, 2020. The increase in Adjusted EBITDA of $11,775 was primarily due to the aforementioned items discussed above and the adverse impacts of COVID-19 in the prior period.

22

Six Months Ended June 30, 2021 Compared to Six Months Ended June 30, 2020