Annual Statements Open main menu

Mayville Engineering Company, Inc. - Annual Report: 2022 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2022

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM                      TO                     

Commission File Number 001-38894

Mayville Engineering Company, Inc.

(Exact name of Registrant as specified in its Charter)

Wisconsin

39-0944729

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)

715 South Street

Mayville, Wisconsin

53050

(Address of principal executive offices)

(Zip Code)

Registrant’s telephone number, including area code: (920387-4500

Securities registered pursuant to Section 12(b) of the Act:

Title of each class

Trading

Symbol(s)

Name of each exchange on which registered

Common Stock, no par value

MEC

New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES  NO 

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. YES  NO 

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES  NO 

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). YES  NO 

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer

 

  

Accelerated filer

 

Non-accelerated filer

 

  

Smaller reporting company

 

Emerging growth company

If an emerging growth company, indicate by check mark if the Registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES  NO 

Indicate by check mark whether the Registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262 (b)) by the registered public accounting firm that prepared or issued its audit report.

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the Registrant included in the filing reflect the correction of an error to previously issued financial statements.

Table of Contents

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the Registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b).

The aggregate market value of the Common Stock held by non-affiliates of the Registrant, based on the closing price of the shares of common stock on the New York Stock Exchange on June 30, 2022, was $151,474,107.

The number of shares of the Registrant’s Common Stock outstanding as of February 17, 2023 was 20,172,746.

DOCUMENTS INCORPORATED BY REFERENCE

Part III of this report incorporates information by reference to the Registrant’s proxy statement for its 2023 annual meeting of shareholders, which proxy statement will be filed with the Securities and Exchange Commission no later than 120 days after the close of the year ended December 31, 2022.

Table of Contents

Table of Contents

    

Page

PART I

Item 1.

Business

1

Item 1A.

Risk Factors

14

Item 1B.

Unresolved Staff Comments

27

Item 2.

Properties

28

Item 3.

Legal Proceedings

28

Item 4.

Mine Safety Disclosures

28

PART II

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

29

Item 6.

Reserved

30

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

31

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

42

Item 8.

Financial Statements and Supplementary Data

43

Item 9.

Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

70

Item 9A.

Controls and Procedures

70

Item 9B.

Other Information

71

Item 9C.

Disclosure Regarding Foreign Jurisdictions that Prevent Inspections

71

PART III

Item 10.

Directors, Executive Officers and Corporate Governance

72

Item 11.

Executive Compensation

72

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

72

Item 13.

Certain Relationships and Related Transactions, and Director Independence

72

Item 14.

Principal Accounting Fees and Services

72

PART IV

Item 15.

Exhibits, Financial Statement Schedules

73

Item 16.

Form 10-K Summary

77

Signatures

78

i

Table of Contents

PART I

Item 1. Business.

Cautionary Statement Regarding Forward-Looking Statements

Certain matters discussed in this Annual Report on Form 10-K contain forward-looking statements that involve risks and uncertainties, such as statements related to future events, business strategy, future performance, future operations, financial position, estimated revenues and losses, projected costs, prospects, plans and objectives of management. All statements other than statements of historical fact may be forward-looking statements. Forward-looking statements are often, but not always, identified by the use of words such as “seek,” “anticipate,” “plan,” “continue,” “estimate,” “expect,” “may,” “will,” “project,” “predict,” “potential,” “targeting,” “intend,” “could,” “might,” “should,” “believe” and similar expressions or their negative. Forward-looking statements should not be read as a guarantee of future performance or results, and will not necessarily be accurate indications of the times at, or by, which such performance or results will be achieved. Forward-looking statements are based on management’s belief, based on currently available information, as to the outcome and timing of future events. These statements involve estimates, assumptions, known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those expressed in such forward-looking statements. Mayville Engineering Company, Inc. (MEC, the Company, we, our, us or similar terms) believes the expectations reflected in the forward-looking statements contained in this Annual Report on Form 10-K are reasonable, but no assurance can be given that these expectations will prove to be correct. Forward-looking statements should not be unduly relied upon.

Important factors that could cause actual results or events to differ materially from those expressed in forward-looking statements include, but are not limited to, those described in “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K for the year ended December 31, 2022, as such may be amended or supplemented in Part II, Item 1A of our subsequently filed Quarterly Reports on Form 10-Q, and the following:

Macroeconomic conditions, including inflation, rising interest rates and recessionary concerns, as well as ongoing supply chain challenges, labor availability and cost pressures, and the COVID-19 pandemic, have had, and may continue to have, a negative impact on our business, financial condition, cash flows and results of operations (including future uncertain impacts);
risks relating to developments in the industries in which our customers operate;
risks related to scheduling production accurately and maximizing efficiency;
our ability to realize net sales represented by our awarded business;
the COVID-19 pandemic continues to negatively affect our business, financial condition, cash flows, results of operations, supply chain (including the supply chain issues encountered by our original manufacturing customers), and raw material availability, as well as customer demand (including future uncertain effects);
failure to compete successfully in our markets;
our ability to maintain our manufacturing, engineering and technological expertise;
the loss of any of our large customers or the loss of their respective market shares;
risks related to entering new markets;
our ability to recruit and retain our key executive officers, managers and trade-skilled personnel;
volatility in the prices or availability of raw materials critical to our business;

1

Table of Contents

manufacturing risks, including delays and technical problems, issues with third-party suppliers, environmental risks and applicable statutory and regulatory requirements;
our ability to successfully identify or integrate acquisitions;
our ability to develop new and innovative processes and gain customer acceptance of such processes;
risks related to our information technology systems and infrastructure;
geopolitical and economic developments, including foreign trade relations and associated tariffs;
results of legal disputes, including product liability, intellectual property infringement and other claims;
risks associated with our capital-intensive industry;
risks related to our treatment as an S Corporation prior to the consummation of our initial public offering of common stock (IPO); and
risks related to our employee stock ownership plan’s treatment as a tax-qualified retirement plan.

These factors are not necessarily all of the important factors that could cause actual results or events to differ materially from those expressed in forward-looking statements. Other unknown or unpredictable factors could also cause actual results or events to differ materially from those expressed in the forward-looking statements. All forward-looking statements attributable to us are qualified in their entirety by this cautionary statement. Forward-looking statements speak only as of the date hereof. We undertake no obligation to update or revise any forward-looking statements after the date on which any such statement is made, whether as a result of new information, future events or otherwise, except as required by federal securities laws.

General

MEC is a leading U.S.-based value-added manufacturing partner that provides a full suite of services from concept to production, including prototyping and tooling, production fabrication, coating, assembly and aftermarket components. Our customers operate in diverse end markets, including heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture, military and other end markets. We have developed long-standing relationships with our blue-chip customers based upon a high level of experience, trust and confidence. “We Make Things Simple” by providing a diverse set of process offerings and a “one stop shop” for end-to-end solutions with benefits throughout the entire product lifecycle, including front-end collaboration in design and prototyping, product manufacturing, aftermarket components and ancillary supply chain benefits. Founded as a corporation in 1945 and headquartered in Mayville, Wisconsin, we are a leading Tier I U.S. supplier of highly engineered components to original equipment manufacturer (OEM) customers with leading positions in their respective markets. We are focused on producing the highest quality components using complex processes at the lowest cost by working with customers throughout the product design and development process to establish optimal solutions. Our engineering expertise and technical know-how allow us to add value through every product redevelopment cycle (generally every three to five years for our customers). According to The Fabricator magazine, we have been ranked as the largest fabricator in the United States for the past twelve years in a row (2011 – 2022).

Our customers’ complex products require a unique combination of our capabilities that allow us to achieve a customized offering to satisfy our customers’ desired outcomes. Our capabilities, which include, but are not limited to: metal fabrication, metal stamping, tube bending and forming, robotic part forming, robotic welding, resistance welding, five-axis tube and fiber laser cutting and custom coatings, including high heat and chemical agent resistant coating (CARC) painting, are used in a variety of applications and represent the building blocks of what we produce.

2

Table of Contents

Our key customers have globally recognized brands and demand the highest product quality and expertise. Over our more than 75-year history, we have developed capabilities and provided solutions that result in customer loyalty and long-standing relationships, which we call “Experience You Can Trust”. We have a diverse and market-leading customer base that serves broad end markets representing favorable near- and long-term growth prospects for us. We have a track record of growth and are well-positioned to increase our market share and benefit from the growth in customer demand as well as the secular trends of reshoring and outsourcing across the end markets that we serve. To help pursue our strategic mission, we have approximately 2,300 employees who are tactically aligned around our core values. We are led by an experienced management team that has contributed to our growth by establishing deep and long-standing relationships with key customers and has worked to expand the customer base both organically and through strategic acquisitions.

We maintain an established base of long-standing customers comprised of leading, blue-chip OEM manufacturers across the United States. Our broad capabilities offering and track record of producing the highest quality solutions have allowed us to establish, and subsequently deepen, relationships with additional products and platforms over time. For example, our more than 40-year relationship with Deere & Company (John Deere) began with a small order of simple stamped parts for a farm tractor in its agricultural segment that expanded over time and represented 2022 sales in excess of $92 million across five market segments, representing over 60 model platforms. We have also been successful in winning customers and rapidly expanding relationships with high-growth customers by utilizing our complete product lifecycle management offering. For instance, we began our relationship with a powersports company less than ten years ago, starting with our expertise in performance structure suspension components, and we have been able to expand our relationships into tubes, fabrications and finished goods assemblies. Through this expansion, with product shipping from multiple facilities, we have been able to deepen our relationship and expand our market position through each of their new product updates, solidifying us as a strategic partner.

We serve customers through 20 strategically located U.S. facilities, across seven states, with approximately three million square feet of manufacturing capacity. Our expansive footprint enables us to service and maintain strong relationships with existing key customers across the United States with a “local” presence, as well as target new customer opportunities. Coupled with our focus on market alignment and execution, we constantly strive to improve and refine capabilities, capacities and reduce our carbon footprint. In addition, the ongoing investment in flexible, re-deployable automation allows us to expand output while reducing cost and improving quality, productivity and consistency for margin enhancement and market leading competitiveness.

Our historical success is a function of our engineering expertise, extensive manufacturing capabilities, limited commodity exposure, investment in automation and embedded relationships with the contractual ability to pass through variability in commodity prices. We believe we are poised to grow through economic cycles due to our:

market positioning and reputation;
product breadth;
flexible and re-deployable capital investment in automation and process capabilities; and
our geographic, end market and product diversification.

Our diversified profile today best positions us for stability and leading market performance through all phases of an economic cycle.

3

Table of Contents

Our Industry

We compete in the highly fragmented market of contract manufacturers, the majority of which are small local players that are limited in scale, capabilities and technology. Many of these local manufacturers have single or limited production capabilities and provide niche components in specific geographic markets. Accordingly, there are a limited number of competitors in the value-added manufacturing market in which we operate with the capacity and expertise to deliver the complete product lifecycle of solutions we offer. For example, our diverse manufacturing capabilities across product lines have contributed to us being selected the Largest Fabricator by The Fabricator magazine’s “FAB 40” listing in the desirable U.S. markets for the past twelve years in a row (2011 – 2022). While we compete with certain manufacturers across selected product lines, we believe that no single manufacturer directly competes with us across our full offering and end market applications.

Our end market diversification coupled with our extensive product breadth allows us to maintain financial stability as individual end markets fluctuate. The primary end markets we serve include heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture and military, among others. As markets strengthen or weaken, our output is redirected and realigned to support ongoing change. Further, as these fluctuations affect the market, we are favorably positioned to benefit from the broader trend of our OEM customers consolidating to fewer and more sophisticated suppliers in order to improve quality and delivery while lowering the total cost of doing business. This consolidation trend will allow us to grow and protects our cash flow as markets change and shift.

We have also experienced, and benefitted from, OEM trends seeking to improve their strategy execution and simplify their business through outsourcing and reshoring. Based on our history, OEMs pursue a strategy that focuses on core component market differentiation, such as structural frames and complete powertrain assemblies, and prefer to outsource the remaining product components to third parties rather than manufacturing them in-house. This is done in order to maintain their strategic focus, drive cost savings and reduce their own investment in manufacturing, thereby allowing them to focus on the most important aspects of their value creation process, namely product design and development, final product assembly and testing, branding, sales, marketing and distribution. While each specific OEM differs in its strategy, we see these trends continuing as customers deal with workforce and supply chain constraints and look for optimum return on investments while improving cash flow. Moreover, our OEM customers focus on the production of the core components of their products, which leads them to rely on outsourced providers like us for the remaining components of their finished product needs. OEMs are also continuing to bring production back to the US and simplifying their supply chain processes. We believe we will benefit from this continued shift in our customers’ focus and ongoing desire for OEMs to improve efficiencies, reduce costs and simplify supply chains. Our established and embedded relationships, breadth of capabilities and scalability will allow us to simplify the supply chain process for our customers by acting as a single point of contact in the supply chain. In addition, we believe OEMs are increasingly favoring platforms supported by larger, more sophisticated and financially stable suppliers with the ability to serve large national and international operations all while maintaining a local touch. Our extensive manufacturing footprint, competitive cost structure and integrated design, engineering, production planning and quality program management capabilities position us favorably to take advantage of these opportunities and trends.

Our Competitive Strengths

We believe that customers turn to us for their manufacturing needs because we are the ultimate “ReSource”. ReSource is a dual-purpose acronym we use to describe the breadth of our capabilities and our goal to provide a complete product lifecycle solution allowing customers to re-source all of their fabrication needs through us. We collaborate with our customers to generate strategic alignment and position ourselves as an essential part of our customers’ product development and manufacturing process by drawing on our deep product and engineering knowledge to deliver best-in-class solutions. We offer a broad portfolio of end-to-end solutions comprised of advanced and innovative processes and capabilities that enhance quality and simplify supply chains. We are focused on producing the highest quality components using complex processes at the lowest cost by working with customers throughout the product design and development process to establish optimal solutions. Our engineering expertise and technical know-how allows us to add value through every product redevelopment cycle (generally every three to five years for our customers).

Value-Added Supply Chain Partner with Embedded Relationships. Our embedded relationships with our large and diverse customer base are driven by the commitment to excellence our employees take in their work, which emphasizes the highest quality and performance in all facets of our business, including our ability to partner with our customers and deliver to them complex solutions across a wide range of products. Our unique, end-to-end offering provides solutions throughout the life cycle of a product, including upfront product manufacturability advice and prototyping, production volumes and aftermarket components. We strive to maintain operation alignment (and continuous re-alignment) with our customers’ strategy and production activities as they evolve,

4

Table of Contents

allowing us to remain agile in response to market changes, while enabling our customers to be successful, and remain adaptable to changes to retain flexibility and adjust appropriately. Our focus on collaboration with our customers and our breadth of capabilities also generates strategic alignment with our customers, resulting in deep-rooted relationships, driving vendor reduction and providing other ancillary benefits such as optimization of working capital investments. Our track record of engineering expertise has resulted in our consistent inclusion in customer design and prototyping activities, enabling customers to view us as an invaluable extension of their own teams. In turn, this collaboration allows our customers to focus on the development of their core technologies and products. Our position as a deeply embedded supply chain partner of scale allows us to provide a multitude of solutions, driving strong customer relationships with high switching costs.

Leading and Defendable Market Position in Attractive North American Market. According to the Fabricator magazine, we have been ranked as the largest fabricator in the United States for the past twelve years in a row (2011 – 2022). The market is highly fragmented and characterized by high barriers to entry given the complex nature of the work, established relationships and high customer switching costs. While there are numerous competitors in the markets in which we operate, few maintain the product breadth, manufacturing capabilities, scale or engineering expertise that we do. Our depth of capabilities allows us to offer our customers:

low volume production capability;
customized and sophisticated solutions;
unique engineering and manufacturing capabilities throughout the product lifecycle;
critical scale to service large national and regional customers as well as local customers; and
the ability to act as a single point of contact and offer seamless customer service.

End Market and Customer Diversification. Our value-added manufacturing focus enables us to remain diversified across a variety of customer end markets, including heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture, and military, among others. These end markets are representative of our globally recognized customers, which are comprised of large OEM manufacturers. In 2022, our top customer and top ten customers accounted for 17.2% and 79.9% of net sales, respectively, which collectively represents hundreds of platforms that we serve across a variety of end markets and customer operating segments. Our access to a multitude of end markets allows us to strategically shift focus to sell into current opportunities as end market demand evolves. In addition to customer and end market diversification, our customers themselves are also diversified across multiple end markets. For example, we provide John Deere, our leading customer with 2022 net sales accounting for 17.2% of our total revenue, with over 5,000 SKUs across over 60 individual John Deere platforms including the agriculture, forestry, turf care, power systems and construction & access equipment end markets. Our increasingly stable performance is a direct result of our intentional business design of agility and adaptability to realign manufacturing capacities to serve diversified and ever-changing end markets.

5

Table of Contents

Graphic

Breadth of Capabilities Appealing to a Variety of Applications. We have many manufacturing capabilities that together represent the building blocks for the complex solutions we provide to our customers. We maintain a full spectrum of capabilities across our 20 facilities to address a wide set of customer needs, including upfront product development advice and prototyping, unique manufacturing processes and capabilities across a variety of products and back-end finishing, assembly and aftermarket components representing a unique end-to-end offering. Our range of capabilities combined with our breadth of components, including fabrications, tubes, tanks, and performance structures, expands the applicable uses and end markets in which we may offer our components. Throughout our history, our capabilities have allowed us to generate growth by expanding into new verticals and by further penetrating existing verticals through cross-selling to increase wallet share, a strategy that has driven deep-rooted relationships with our customers. Further, our unique combination of manufacturing processes allows us to opportunistically target sophisticated, higher margin business. The diversity of our offering has provided our Company with financial stability through various end market and economic cycles.

6

Table of Contents

Technology-Enabled Infrastructure. We continue to invest in a technology-enabled asset base that provides significant flexible and re-deployable capacity to support our planned growth, increases profitability, efficiency, quality and employee safety, reduces spend on energy and drives a long-term cost advantage over our competitors. We have leveraged our purchasing power to make significant investments in operational infrastructure throughout our history, in items such as flexible and re-deployable automation and capacity improvements to enhance throughput, quality and consistency. For example, we were one of the first in our industry to adopt fiber lasers and have continued to invest in this capability. Throughout the past couple of years, we have implemented 10,000- and 12,000-watt fiber lasers with an automation tower, which are on average three times faster, provide a cleaner, more precise cut and use one-third the power of traditional CO2 lasers, with a payback period of less than two years. Additionally, the implementation of robotic brakes has improved quality through a continued shift towards precision automation. By reducing setup procedures, manual employee lifting requirements and downtime while offering additional capacity, the implementation of robotic brakes has resulted in a payback period of approximately two years. These two examples of investments in technology-enabled infrastructure allow us to reallocate our workforce, as employees can be retrained and redeployed into more technically skilled positions. In today’s ever-changing labor market, the ability to redeploy labor to increase flexibility and capacity for our customers is of the utmost importance and interest. Our investments in continuous improvement and automation have driven operational efficiencies and improved metric tracking allowing our management team to more effectively run the business and improve the value we provide to our customers. We have, from time-to-time, made strategic, customer-driven investments that directly support new product and market expansion which result in further competitive advantages and higher switching costs for our customers.

Cost Structure and Operational Excellence. We have reduced our exposure to commodity price risk by structuring our customer contracts to pass through changes in commodity prices. As such, we have been able to effectively limit any potential impact from tariffs and commodity price volatility to our margins. Our scale and profitability have also allowed us the flexibility to implement continuous improvement initiatives in driving efficiencies, such as automation and additional capacity, which will result in long-term efficiency and margin improvements, and expanded capabilities.

Our Strategy

During 2022, we announced the implementation of a value-creation framework that is intended to maximize stakeholder value through operational and commercial excellence, organic and inorganic growth, and the continued cultivation of our high-performance employee-driven culture.

Lean-Focused Process Initiative. The Company has consistently deployed lean tools within our operations for many years, however, to significantly accelerate efforts and drive exponential improvement across all of the Company’s processes, we have implemented our MEC Business Excellence (MBX) initiative. Based upon lean manufacturing principles, MBX will continuously drive operational and commercial excellence, cost reductions and provide a platform to standardize processes and systems across all facets of the organization. As part of MBX, we have established clear short- and long-term objectives, with the goal of outlining and adapting priorities and targets to improve operational and financial goals while creating a culture with a keen focus on continuous lean improvements in order to maintain a differentiated and defendable market-leading position. The MBX initiative is expected to drive a reduction of costs and increase operating efficiencies, which will inherently accelerate immediate and long-term productivity and margin improvements.

Achieve Sales Growth Through Organic Expansion. We believe there is ample opportunity to achieve deeper penetration of existing customers and to win new customers with our strong value-added manufacturing solutions supporting the complete product lifecycle. Through leveraging our core product capabilities, we expect to expand into new markets, grow into adjacent and complementary product platforms and establish growth on new product introductions. Secular reshoring and outsourcing trends provide us with an opportunity to expand our relationships with current clients and attract new clients looking to fortify their supply chains. We are actively pursuing strategies to expand our wallet share with our customers by capturing a wider variety of products and platforms through solidifying our relationships with current customers. These opportunities are enhanced through cross selling between the Company’s capabilities and customer base. Our expertise allows us to produce higher quality components at cost-effective rates while our volume, equipment and know-how establish competitive advantages. Through these organic growth opportunities, we are focused on deepening and defending existing market share, while diversifying our customer and end market exposure.

7

Table of Contents

Pursue Opportunistic Acquisitions. Our management team maintains a proven track record of successfully executing and integrating strategic acquisitions. We have completed two significant acquisitions since 2012 (Center Mfg. Co. in 2012 and Defiance Metal Products (DMP) in December 2018) and four other complementary acquisitions since 2004, which have contributed new capabilities, product offerings, end markets served, and technologies to our legacy business, along with significant synergy opportunities that have enhanced our financial position. Our strategy is to continue to identify, and opportunistically execute on, accretive acquisitions that will allow our Company to achieve further growth, maximize return on capital and diversify our end market mix. With the secular trend of growth in electrification, we are evaluating acquisition opportunities that would allow us to expand our capabilities into the light-weighting of materials, such as aluminum, plastics, and composites, providing diversification into new markets like electric vehicles and renewables along with capturing new opportunities with current customers. We also see potential acquisition opportunities expanding our design, prototyping and after-market services to better support customer requirements.

Maintain Alignment with Employee Base and Employee-Driven Results. Our rich history of employee ownership has cultivated a strategic management-employee alignment and results-driven organization with each employee contributing to a common goal. Our employees maintain an ownership stake since our IPO, which we believe benefits the entire organization as our strategic alignment remains in place and continues to generate employee-driven results. As we continue to invest in our business and increasingly implement a more technology-enabled infrastructure, we will strive to redeploy our employees in other, higher-skilled areas of our business and invest in training where needed. Our employees are the foundation of our company; with experience across a diverse range of markets and capabilities, they drive innovation, believe in our process and the outcomes of their work and our success. Our investment in new technology attracts technically savvy employees to replace retiring traditionally skilled employees. One of our key strategic priorities is to increase investment in our workforce and to improve employee retention through performance-based incentives, talent development and succession planning. We and our employees are also highly involved in, and actively support, the communities in which our facilities are located; our 2,300 employees take satisfaction in creating value and support for both our customers and communities every day.

Our Capabilities

We offer a broad portfolio of end-to-end processes and solutions comprised of advanced and innovative capabilities that enhance quality and simplify supply chains for our customers. Through our collaborative approach, we maintain a complete, and growing, set of sophisticated manufacturing capabilities to meet the diverse needs of our customers, including:

Program Management ¾ We offer our customers a complete solution from concept to launch following the APQP (Advanced Product Quality Planning) process (planning, design for manufacturability and development, process design and improvement, product and process validation and continuous improvement).
Engineering ¾ We collaborate with our customers and provide design for manufacturing, off-line programming (lasers, brake press, machining, robotic welding, coordinate measuring machines), value engineering and CI (continuous improvement).
Tool Design and Build ¾ Our in-house tool design and tool room capability ensures quality from start to finish. We build and service all categories of tooling, including large progressive dies.
Laser Cutting ¾ Our programmable fiber and CO2 laser cutting capabilities eliminate expensive hard tooling. Our equipment can cut metal up to 1 inch thick while maintaining tolerances to .002 inches at speeds up to 4,000 per minute. Our tube lasers are state of the art cutting machines that offer exceptional tolerances and through-put.
Brake Press ¾ We combine our operator’s expertise with the proper equipment required to offer top versatility to our clients for bending, forming, coining and air bending. Our facilities house the latest press brake machinery including robotic part manipulation and stacking.
Stamping ¾ We provide custom metal stamping capabilities for short, medium or long production runs. For longer runs, our production of sheet metal stamping uses 50 to 1,200-ton manual or automatic feed presses with state-of-the-art feed lines for precision metal stamping. Our small, high-speed presses are ideal for producing intricate high-volume stampings.

8

Table of Contents

Machining ¾ We provide a variety of machining capabilities to meet our customer needs by providing in-house machining assistance for parts that are part of larger fabrications and assemblies.
Tube Bending ¾ We maintain vast tube bending capabilities, including (i) manufacturing of oval, round and square tubes from .25 inch up through six inch and (ii) leveraging our extensive inventory of equipment including the latest CNC (computer numerical control) benders; and state-of-the-art technologies such as CNC electro-servo-driven bending with multi-task heads. We have integrated robotic automation into applicable bending cells to generate maximum throughput with less labor costs.
Welding ¾ We have earned our reputation as one of the premier manufacturers of weldments. Our welding departments offer manual and robotic wire welding, including GMAW (Gas Metal Arc Welding and also known as MIG, or Metal Inert Gas), GTAW (Gas Tungsten Arc Welding) and also known as TIG (Tungsten Inert Gas), Heliarc, Fluxcore, Metalcore, Aluminum, Plasma Weld, Brazing and Pulse Heliarc.
Coatings, Assembly and Logistics ¾ We provide premier full-service coating, assembly and logistics solutions. Our coating capabilities offer a full-range of high technology industrial coating capabilities, including: E-Coat, military certified CARC, commercial and industrial powder and liquid coatings. Our coating systems utilize direct-to-metal and pre-treatments including acid pickle, zinc phosphate and in-line Alodine for the conversion of aluminum.

Our Proven Approach

We collaborate with our customers to generate a strategic alignment and position ourselves as an essential part of our customers’ product development and manufacturing processes by drawing on our deep product and engineering knowledge to deliver best-in-class solutions. Our approach is simple: we view quality as a significant business strategy with a strong return on investment. Our philosophy on quality is based on Continuous Improvement with an IATF (international automotive task force) and ISO (international organization for standardization) foundation. Our skilled and experienced staff is highly trained in areas of quality planning, metrology, geometric dimensioning and tolerancing (ASME Y14.5M 1994), ISO, statistical techniques (SPC) and ISO 14001 certifications. Our Quality Management System is comprised of the following:

IATF 16949:2016 certification (one of the automotive industry’s most widely used international standards for quality management);
ISO 9001:2015 registration (international standard for quality management systems);
process and assembly line audits with focus on process control;
process capability that is proven at validation and monitored during production; and
specialized validations for paint and weld operations.

We periodically enter into joint process improvement efforts with key customers. Such exercises have historically resulted in reduced manufacturing critical path time, cost reductions and quality improvements through effective batch sizes and more repeatable processes. Our continuous improvement initiatives have resulted in the acquisition and application of state-of-the-art technologies and plant improvements that support lean, quick response manufacturing flexibility that put us at the forefront of our market. Moreover, the agility that our quick response manufacturing methodology provides us keeps our purchasing, manufacturing, engineering and quality teams on the cutting edge of flexible manufacturing. This adaptable approach also decreases manufacturing costs, allows for faster order turnaround times and elimination of excess waste.

We maintain an advanced machinery portfolio in our facilities allowing us to leverage our employee workforce with state-of-the-art capabilities and functionality. We strive to maintain our assets or upgrade capabilities where deterioration has driven obsolescence or better technology is available, reducing our carbon footprint. Most recently, we have invested in multiple fiber laser systems and robotic brake presses with automation aimed at reducing labor content and optimizing floor space which allows us to generate more revenue with the same workforce and footprint. We have also recently invested in a machining center with palletizers, leading edge tube lasers with automatic loaders, robotic brake presses, robotic weld cells and a direct-to-metal paint line.

9

Table of Contents

Our Markets

Our primary end markets include (but are not limited to) the heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture and military markets. While our individual end markets may be exposed to cyclical variations, the diversified nature of our end markets affords us the ability to shift production with demand as certain end markets trend lower and others trend higher. In our experience, our diversification has muted the impact of downturns on our business that have affected us in the past. For example, we experienced net sales growth during the 2008 and 2009 recessions due to strong orders, particularly from our customers focused on the military end market. Moreover, as our heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, and agriculture customers’ revenues fluctuated from 2013 to 2017, with median peak-to-trough sales decline of 23%, our peak-to-trough sales declines were less than that of those respective markets at only 10%. We were able to accomplish this by reallocating our resources to serve our heavy- and medium-duty commercial vehicles and powersports customers, leading to strong double-digit growth in those end markets.

Heavy- and Medium-Duty Commercial Vehicles: Heavy-duty commercial vehicles include class 8 heavy trucks such as standard semi-trucks. Medium-duty commercial vehicles include classes 3-7 trucks such as box trucks;
Construction & Access Equipment: Primary applications include wheel loaders, crawlers, skid steer loaders, excavators, motor graders, aerial lifts, boom lifts and other construction equipment;
Powersports: Encompasses our all-terrain (ATV) and multi-utility (MUV) vehicles, as well as marine and motorcycle markets;
Agriculture: Primary applications include tractors, combines, sprayers, turf care, implements and other agriculture-related equipment;
Military: We provide a variety of components for military vehicle platforms;
Other: We provide components and assemblies to a variety of other industrial end markets, such as power generation, mining, medical cabinetry, and the automotive end market.

Our Customers

We are a critical and deeply embedded supply partner with strong strategic alignment and relationships with our customers. We have developed long-standing business relationships with our OEM customers, many of which span decades. Further, we are diversified by customers and end markets with net sales attributed to our top 20 customers accounting for $483 million of 2022 net sales, and no single end market accounting for more than 39% of net sales. For the year ended December 31, 2022, John Deere, PACCAR Inc. and AB Volvo accounted for 17.2%, 16.0% and 11.9% of net sales, respectively. We have not historically experienced customer attrition given high customer switching costs resulting from our embedded relationships driven by our broad capabilities and scale.

Raw Materials and Manufactured Components

Our purchases primarily include steel and aluminum. We maintain a broad and diverse base of over 1,000 suppliers. Our established relationships provide efficient and flexible access to resources and redundancy to ensure support of our customers. We have no history of significant supply issues or outages. In 2022, no single supplier represented more than 13% of our total purchases and 98% of the raw materials we purchased were sourced from suppliers in the United States. Our suppliers are strategically located in order to maximize efficiencies and minimize shipping costs, although switching costs are minimal and we maintain a multitude of alternative suppliers that we could transfer orders to, if needed. We have structured our customer contracts to pass through commodity price changes, which has allowed us to remain mostly unaffected by raw material price volatility and tariffs. As we continue to grow, we intend to leverage our size and scale to further reduce material costs.

10

Table of Contents

Sales and Marketing

We have a strong sales team comprised of approximately 50 experienced professionals responsible for managing and expanding client relationships and proactively pursuing new opportunities. Sales personnel are aligned by market segment and customer, including heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture, military and other end markets, and employ a highly technical and collaborative sales process with deep knowledge of our customers and capabilities. Sales personnel have assigned support teams comprised of inside sales, commercial operations, marketing and sales administration personnel. We are consistently involved in the request for proposal processes, where our sales teams with deep process expertise collaborate with customers on optimal designs for manufacturability and manufacturing efficiency. The upfront collaboration drives formalization of product specifications, program lifecycle planning, cost estimates and risk mitigation. The sales process typically takes 3 – 18 months and ultimately ends in the implementation of product lifecycle timelines and purchase orders under long-term customer arrangements. The sales team utilizes systems infrastructure that effectively track and manage backlogs, quotes and bookings information, strategic projects and call reports, all of which are reviewed at weekly sales team meetings.

Information Systems

We utilize standardized information technology systems across all areas of quoting and estimating, enterprise resource planning, materials resource planning, capacity planning and accounting for enhanced procurement of work, project execution and financial controls. We provide information technology oversight and support from our corporate headquarters in Mayville, WI. The operational information systems we employ throughout our company are industry specific applications that in some cases have been internally or vendor modified and improved to fit our operations. Our enterprise resource planning software is integrated with our operational information systems wherever possible to deliver relevant, real-time operational data to designated personnel. Accounting and operations personnel of acquired companies are trained not only by our information technology support staff, but by long- tenured employees in our organization with extensive experience using our systems. We believe our information systems provide our people with the tools to execute their individual job function and achieve our strategic initiatives.

Our Competition

We participate in a highly fragmented market with competitors in each of the end markets we serve ranging in size from small companies focused on a single capability or end market, to large multi-disciplinary companies. While there can be instances of intense competition in specific end markets, we believe that we have been able to effectively compete, and maintain competitive advantages on the basis of our:

scale and product offering with the ability to cross-sell and provide our customers with a one-stop solution;
broad manufacturing capability and flexibility to fulfill requests that require complex solutions;
customer service with our highly skilled and knowledgeable workforce able to provide consultative advice; and
regionalized geographic focus provides a defensible position from both foreign and domestic competitors as our customers continue to take a regionalized approach to production, which provides a shorter supply chain with greater flexibility.

Our Human Capital Management

As of December 31, 2022, we had approximately 2,300 full-time employees, approximately 1,775 of whom are production employees. None of our employees are represented by a union and we are not party to any collective bargaining agreements. On average, our employees have approximately eight years of service with us.

Training and development

We maintain an experienced and skilled workforce. We have been focused on attracting and retaining high quality personnel as they represent a critical factor in our continued success. There are many different career paths available to employees, and in order to assist in their career development, we offer multiple in-house training programs, mentorship programs and tuition reimbursement. Our talent development efforts span across all levels of the organization, including an annual performance review process allowing

11

Table of Contents

employees to discuss and build development plans with their leaders to develop their careers and an executive coaching program which prepares our future leaders for increased responsibilities at MEC. Despite the recent market challenges in the hiring of trade-skilled employees, our continued investment in newer technologies and capabilities has allowed us to opportunistically re-train and redeploy certain roles that were previously human capital-intensive, and re-train and repurpose employees into other areas of the company.

Compensation and benefits

We believe we maintain strong relationships with our employees and believe they are aligned with our employee-owned mindset through the Mayville Engineering Company, Inc. Employee Stock Ownership Plan (the ESOP) and annual discretionary profit sharing programs. We offer our employees competitive compensation and comprehensive benefit packages, annually benchmarking them against comparable industries in the same geographic vicinity to where our facilities are located. Full-time employees are eligible to receive the following benefits: health insurance (medical, dental, vision), short-term and long-term disability, life insurance, accidental death and dismemberment insurance, flexible spending accounts, wellness program and life matters employee assistance program. Further enhancing our benefit offerings, we provide an on-site healthcare team at certain facilities to treat work and non-work related injuries and assist employees with general wellness and overall well-being.

Additionally, MEC has several initiatives centered around employee appreciation, which include: cookouts and holiday lunches, Fresh Market food program, appreciation gift cards and quarterly bonuses.

Health and safety

The safety, health and well-being of our employees is one of the Company’s top priorities. Our “Work MEC Safe” program creates a strong safety culture based on five key elements: Inspire, Lead, Analyze, Educate and Recognize. These elements lay the foundation for establishing an employee voice in daily operations, ensuring safety ownership from those in leadership roles, identifying workplace hazards through routine inspections, audits and observations, training employees to identify and mitigate risks and prevent injuries, and developing avenues to continue enhancing the importance of safety in the workplace.

Ethics

Along with our core values, we act in accordance with our Code of Conduct Policy, which creates expectations and provides guidance for all our employees to make the right decisions. Our Code of Conduct Policy covers such topics as conducting Company affairs and fair dealing, conflicts of interest, compliance and disclosures, proper use of Company assets, protecting confidential information and reporting and enforcement of Code of Conduct violations.

Environmental Matters

We are subject to numerous federal, state and local laws and regulations relating to manufacturing, handling and disposal of materials into the environment. We believe that our environmental control procedures are adequate.

Information About Our Executive Officers

The following table sets forth certain information as of February 1, 2023, regarding our executive officers:

Name

    

Age

    

Position

Jagadeesh A. Reddy

51

President and Chief Executive Officer

Todd M. Butz

51

Chief Financial Officer

Ryan F. Raber

 

40

 

Executive Vice President - Strategy, Sales & Marketing

Rand P. Stille

 

52

 

Chief Operating Officer

Sean P. Leuba

52

Senior Vice President - Corporate Development and General Counsel

Jagadeesh A. Reddy joined our company as President, Chief Executive Officer and as a member of the Board of Directors in July 2022. Before joining our company, Mr. Reddy was a member of the senior leadership team at W.R. Grace where he was responsible for the Strategy and Growth function as well as Managing Director of Advanced Refining Technologies LLC (ART),

12

Table of Contents

Grace’s global joint venture with Chevron. Mr. Reddy previously served as Vice President and General Manager, Water Technologies Strategic Business Unit, and Vice President, Corporate Strategy at Pentair PLC. Prior to Pentair PLC, he held strategy and business leadership roles at ITT Corporation, and its spin-off, Xylem Inc, spent time in M&A roles with United Technologies Corp, product management roles with Danaher Corporation and started his career in manufacturing operations at Denso Corporation. Mr. Reddy earned a Master of Business Administration in finance and strategy from the Kellogg School of Management and a Master’s in engineering management from the McCormick School of Engineering, both at Northwestern University. He also holds a Master’s in Industrial Engineering from the University of Tennessee, and a Bachelor’s in Mechanical Engineering from a university in India.

Todd M. Butz joined our company in 2008 and has served as our Chief Financial Officer since January 2014. Mr. Butz also serves on the Board of Trustees for Marian University. Prior to joining our company, Mr. Butz spent time in various roles including Manager of Worldwide Financial Reporting at Mercury Marine, a subsidiary of the Brunswick Corporation, and Audit Supervisor at Schenck Business Solutions, now Clifton Larsen Allen. Mr. Butz earned a Bachelor of Science in Accounting and Business Management from Marian University and is currently a licensed certified public accountant.

Ryan F. Raber joined our company in 2009 and has served as our Executive Vice President – Strategy, Sales & Marketing since June 2019. Prior to serving in his current position, Mr. Raber served as our Executive Vice President – Sales & Marketing beginning in November 2018 and as our Vice President of Sales & Marketing beginning in August 2013. Mr. Raber earned a Masters of Business Administration from the University of Wisconsin-Madison and a Bachelor of Science in Mechanical Engineering from Purdue University.

Rand P. Stille joined our company in April 2019 and has served as our Chief Operating Officer since March 2020. Prior to serving in his current position, Mr. Stille served as Executive Vice President – DMP & Performance Structures Operations and Vice President – Performance Structures Operations. Prior to joining our company, Mr. Stille held various roles with Universal Logistics Holdings, Inc. including Senior Vice President of Operations, Vice President & Executive Director of Westport Axle and Vice President of Mexican Operations. Mr. Stille earned a Master of Science in Supply Chain Management from the University of Michigan State and a Bachelor of Arts, Economics and Management degree from Depauw University.

Sean P. Leuba joined our company in January 2023 as Senior Vice President – Corporate Development and General Counsel. Before joining our company, Mr. Leuba was the Head of Corporate Development for Caterpillar Inc. Previously, Mr. Leuba served in multiple progressively senior roles, including as General Manager, Caterpillar Electric Power Division and General Manager, Caterpillar Remanufactured Products Division. Prior to joining Caterpillar, Mr. Leuba practiced law with Arnold & Porter in its Washington, DC office focusing on corporate, securities, M&A and venture capital. Mr. Leuba earned a Master of Business Administration in Finance from the University of Chicago, a Juris Doctor from the Washington and Lee University School of Law, and a Bachelor of Arts from the University of Maryland Baltimore County.

Available Information

Our website address is www.mecinc.com. We are not including the information provided on our website as a part of, or incorporating it by reference into, this Annual Report on Form 10-K. We make available free of charge (other than an investor’s own internet access charges) through our website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, amendments to these reports and our proxy statements, as soon as reasonably practicable after we electronically file such material with, or furnish such material to, the United States Securities and Exchange Commission (the SEC).

13

Table of Contents

Item 1A. Risk Factors.

Investing in our common stock involves risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes, before making a decision to invest in our common stock. The risks and uncertainties described below may not be the only ones we face. If any of the risks actually occur, our business, financial condition, operating results and prospects could be materially and adversely affected. In that event, the market price of our common stock could decline, and you could lose part or all of your investment.

Risks Related to Our Business

Macroeconomic conditions could have a material adverse impact on our business, financial condition, cash flows and results of operations.

Macroeconomic conditions, including inflation, rising interest rates and recessionary concerns, as well as ongoing supply chain challenges, labor availability and cost pressures, and the COVID-19 pandemic, have had, and may continue to have, a negative impact on our business, financial condition, cash flows and results of operations. For instance, we were negatively impacted in 2022 by the ongoing supply chain constraints impacting our OEMs customers (such as microchip shortages and port issues). In addition, in 2022, continued inflationary pressures on wages, benefits, materials, and manufacturing supplies negatively impacted our results of operations and cash flows.

We expect inflationary cost pressures, supply chain challenges and labor shortages to continue in 2023 and we may not be able to fully mitigate the impact of the rising inflationary cost pressures through price increases. Continuing or worsening inflation, recessionary concerns and/or supply chain and labor challenges may have a material adverse impact on our business, financial condition, cash flows and/or results of operations.

Although we do not have any operations outside the United States, geopolitical events, including the ongoing conflict between Russia and Ukraine and the related economic sanctions by Western governments on Russia, has caused greater uncertainty in the global economy and has led to significant volatility in raw material costs, component costs, commodity prices and energy costs, exacerbating the inflation situation.

We are affected by developments in the industries in which our customers operate.

We derive a large amount of our net sales from customers in the following industry sectors: heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agriculture and military. Factors affecting any of these industries in general, or any of our customers in particular, could adversely affect us because our net sales growth largely depends on the continued growth of our customers’ businesses in their respective industries. These factors include:

seasonality of demand for our customers’ products which may cause our manufacturing capacity to be underutilized for periods of time;
our customers’ failure to successfully market their products, to gain or retain widespread commercial acceptance of their products or to compete effectively in their industries;
loss of market share for our customers’ products, which may lead our customers to reduce or discontinue purchasing our processes and solutions and to reduce prices, thereby exerting pricing pressure on us;
economic conditions in the markets in which our customers operate, in particular, the United States, including inflationary pressures and the other negative impacts on economic conditions, as well as recessionary periods such as a global economic downturn;
our customers’ decision to insource the production of components that has traditionally been outsourced to us; and

14

Table of Contents

product design changes or manufacturing process changes that may reduce or eliminate demand for the components we supply.

We expect that future sales will continue to depend on the success of our customers. If economic conditions and demand for our customers’ products deteriorate, we may experience a material adverse effect on our business, operating results and financial condition.

Most of our customers do not commit to long-term production schedules, which makes it difficult for us to schedule production accurately and achieve maximum efficiency of our manufacturing capacity.

Most of our customers do not commit to long-term contracts or firm production schedules, and we continue to experience reduced lead-times in customer orders. Additionally, customers may change production quantities or delay production with little lead-time or advance notice. Therefore, we rely on and plan our production and inventory levels based on our customers’ advance orders, commitments and/or forecasts as well as our internal assessments and forecasts of customer demand. The volume and timing of sales to our customers may vary due to, among others:

variation in demand for or discontinuation of our customers’ products;
our customers’ attempts to manage their inventory;
design changes;
changes in our customers’ manufacturing strategies;
disruptive events in the markets in which our customers operate, including natural disasters, epidemics and pandemics like COVID-19; and
acquisitions of or consolidation among customers.

The variations in volume and timing of sales make it difficult to schedule production and optimize utilization of manufacturing capacity. This uncertainty may require us to increase staffing and incur other expenses in order to meet an unexpected increase in customer demand, potentially placing a significant burden on our resources. Additionally, an inability to respond to such increases in a timely manner may cause customer dissatisfaction, which may negatively affect our customer relationships.

Further, in order to secure sufficient production scale, we may make capital investments in advance of anticipated customer demand (including, in some instances, new customer demand). Such investments may lead to low utilization levels if demand forecasts change and we are unable to utilize the additional capacity. Because fixed costs make up a large proportion of our total production costs, a reduction in customer demand can have a significant adverse impact on our gross profits and operating results. Additionally, we order materials and components based on customer forecasts and orders and suppliers may require us to purchase materials and components in minimum quantities that exceed customer requirements, which may have an adverse impact on our gross profits and operating results. In the past, anticipated orders from some of our customers and anticipated new customers have failed to materialize and/or delivery schedules have been deferred as a result of changes in our customers’ business needs.

We may be unable to realize net sales represented by our awarded business, which could materially and adversely impact our business, financial condition, results of operations and cash flows.

The realization of future net sales from awarded business is inherently subject to a number of important risks and uncertainties, including a lack of long-term commitments and production schedules with customers and anticipated new customers. Accordingly, we cannot assure you that we will realize any or all of the future net sales represented by our awarded business. Any failure to realize these net sales could have a material adverse effect on our business, financial condition, results of operations and cash flows.

15

Table of Contents

In addition to not having a commitment from our customers and anticipated new customers regarding the minimum number of components they must purchase from us if we obtain awarded business, typically the terms and conditions of the agreements with our customers provide that they have the contractual right to unilaterally terminate our contracts with them with no notice or limited notice. In many cases, we must commit substantial resources in preparation for production under awarded customer business well in advance of the customer’s production start date. If such contracts are terminated by our customers, our ability to obtain compensation from our customers for such termination is generally limited to the direct out-of-pocket costs that we incurred for raw materials and work-in-progress. Although we have been successful in recovering these costs under appropriate circumstances in the past, we cannot assure you that our results of operations will not be materially adversely impacted in the future if we are unable to recover these types of pre-production costs related to our customers’ cancellation of awarded business.

The COVID-19 pandemic continues to negatively affect our business, financial condition, cash flows, results of operations, supply chain and raw material availability, as well as customer demand.

Since the first quarter of 2020, there has been a worldwide impact from the COVID-19 pandemic. Government authorities have taken measures to try to contain the virus, such as limiting or closing business activities, transportation and person-to-person interactions, resulting in disruptions at some of our manufacturing operations and facilities, as well as the operations of our customers, and those of our suppliers. In some cases, the relaxation of such trends has been followed by actual or contemplated returns to stringent restrictions on commerce or gatherings, including in parts of the United States and the rest of the world.

Global trade conditions and customer trends that originated during the pandemic continue to persist and may also have a long-lasting adverse impact on us independently of the progress on the pandemic. For example, the COVID-19 pandemic resulted in supply chain issues at our OEM customers (such as microchip shortages and port issues), inflationary pressures on wages, benefits, materials and manufacturing supplies, recessionary concerns and other evolving macroeconomic conditions. The COVID-19 pandemic has had, and could continue to have, a negative impact on our business, financial condition, cash flows, results of operations, supply chain, and raw material availability, although the full extent is still uncertain and cannot be predicted.

Failure to compete successfully in our markets could materially adversely affect our business, financial condition, results of operations or prospects.

We offer our processes and solutions in highly competitive markets. The competitors in these markets may, among other things:

respond more quickly to new or emerging technologies;
have greater name recognition, critical mass or geographic market presence;
be better positioned to take advantage of acquisition opportunities;
adapt more quickly to changes in customer requirements;
devote greater resources to the development, promotion and sale of their processes and solutions;
be better positioned to compete on price due to any combination of low-cost labor, raw materials, components, facilities or other operating items, or willingness to make sales at lower margins than us;
consolidate with other competitors in the industry which may create increased pricing and competitive pressures on our business; and
be better able to utilize excess capacity which may reduce the cost of their processes and solutions.

16

Table of Contents

Competitors with lower cost structures may have a competitive advantage over us. We also expect our competitors to continue to improve the performance of their current processes and solutions, to reduce the prices of their existing processes and solutions and to introduce new processes or solutions that may offer greater performance and improved pricing. Additionally, we may face competition from new entrants to the industry in which we operate. Any of these developments could cause a decline in sales and average selling prices, loss of market share or profit margin compression. Maintaining and improving our competitive position will require successful management of these factors, including continued investment by us in research and development, engineering, marketing and customer service and support. Our future growth rate depends upon our agility to compete successfully, which is impacted by a number of factors, including, but not limited to, our ability to (i) identify emerging technological trends in our target end markets, (ii) develop and maintain a wide range of competitive and appropriately priced processes and solutions and defend our market share against an ever-expanding number of competitors including many new and non-traditional competitors, (iii) ensure that our processes and solutions remain cost-competitive and (iv) attract, develop and retain individuals with the requisite technical expertise and understanding of customers’ needs to develop and sell new technologies and processes.

We may not be able to maintain our manufacturing, engineering and technological expertise.

The markets for our processes and solutions are characterized by changing technology and evolving process development. The continued success of our business will depend upon our ability to:

hire, retain and expand our pool of qualified engineering and trade-skilled personnel;
maintain technological leadership in our industry;
implement new and expand upon current robotics, automation and tooling technologies; and
anticipate or respond to changes in manufacturing processes in a cost-effective and timely manner.

We cannot be certain that we will develop the capabilities required by our customers in the future. The emergence of new technologies, industry standards or customer requirements may render our equipment, inventory or processes obsolete or uncompetitive. We may have to acquire new technologies and equipment to remain competitive. The acquisition and implementation of new technologies and equipment may require us to incur significant expense and capital investment, which could reduce our margins and affect our operating results. When we establish or acquire new facilities, we may not be able to maintain or develop our manufacturing, engineering and technological expertise due to a lack of trained personnel, effective training of new staff or technical difficulties with machinery. Failure to anticipate and adapt to customers’ changing technological needs and requirements or to hire and retain a sufficient number of engineers and maintain manufacturing, engineering and technological expertise may have a material adverse effect on our business, operating results and financial condition.

We are dependent on a limited number of large customers for current and future net sales. The loss of any of these customers or the loss of market share by these customers could materially adversely affect our business, financial condition, results of operations and cash flows.

We depend on a limited number of major manufacturers for a majority of our net sales. For example, our largest customers in 2022, including John Deere, PACCAR Inc. and AB Volvo accounted for 17.2%, 16.0% and 11.9% of our net sales, respectively. Our financial performance depends in large part on our ability to continue to arrange for the purchase of our processes and solutions with these customers, and we expect these customers to continue to make up a large portion of our net sales in the foreseeable future. The loss of all or a substantial portion of our sales to any of our large-volume customers could have a material adverse effect on our business, financial condition, results of operations and cash flows by reducing cash flows and by limiting our ability to spread our fixed costs over a larger net sales base. We may make fewer sales to these customers for a variety of reasons, including, but not limited to:

loss of business relationship;
reduced or delayed customer requirements;

17

Table of Contents

the insourcing of business that has been traditionally outsourced to us;
strikes or other work stoppages affecting production by our customers; or
reduced demand for our customers’ products, including as a result of inflationary pressures, rising interest rates, recessionary concerns and/or geopolitical events.

Entering new markets, either organically or via acquisition, poses new competitive threats and commercial risks.

As we expand into new markets, either organically or via acquisition, we expect to diversify our net sales by leveraging our development, engineering and manufacturing capabilities in order to source necessary parts and components for other industries. Such diversification requires investments and resources that may not be available as needed. Furthermore, even if we sign contracts in new markets, we cannot guarantee that we will be successful in leveraging our capabilities into these new markets and thus in meeting the needs of these new customers and competing favorably in these new markets. If these new customers experience reduced demand for their products or financial difficulties, our future prospects will be negatively affected as well.

We depend on our key executive officers, managers, and trade-skilled personnel and may have difficulty retaining and recruiting qualified employees. Moreover, we operate in competitive labor markets, which may also impact our ability to hire and retain employees at our facilities.

Our success depends to a large extent upon the continued services of our executive officers, senior management, managers and trade-skilled personnel and our ability to recruit and retain skilled personnel to maintain and expand our operations. We could be affected by the loss of any of our executive officers who are responsible for formulating and implementing our business plan and strategy, and who have been instrumental in our growth and development. In addition, we need to recruit and retain additional management personnel and other skilled employees at our facilities. However, competition for our trade-skilled labor is high, particularly in some of the geographic locations where our facilities are located, and especially in light of the labor pressures resulting from the COVID-19 pandemic. Although we intend to continue to devote significant resources to recruit, train and retain qualified employees, we may not be able to attract, effectively train and retain these employees. Any failure to do so could impair our ability to conduct design, engineering and manufacturing activities, efficiently perform our contractual obligations, develop marketable components, timely meet our customers’ needs and ultimately win new business, all of which could adversely affect our business, financial condition and results of operations. If we are not able to do so, our business and our ability to continue to grow could be negatively affected. In addition, salaries and related costs are a significant portion of the cost of providing our solutions and, accordingly, our ability to efficiently utilize our workforce impacts our profitability.

Availability of, and volatility in the prices of, raw materials and energy prices and our ability to pass along increased costs to our customers could adversely affect our results of operations.

The prices and availability of raw materials critical to our business and performance are based on global supply and demand conditions. Certain raw materials used by us are only available from a limited number of suppliers, and it may be difficult to find alternative suppliers at the same or similar costs. While we strive to pass through the price of raw materials to our customers, we may not be able to do so in the future, and volatility in the prices of raw materials (including as a result of macroeconomic conditions and geopolitical events) may affect customer demand for certain components. In addition, we, along with our suppliers and customers, rely on various energy sources for a number of activities connected with our business, such as the transportation of raw materials and finished parts. The availability and pricing of these resources are subject to market forces that are beyond our control. Furthermore, we are vulnerable to any reliability issues experienced by our suppliers, which also are beyond our control. Our suppliers contract separately for the purchase of such resources, and our sources of supply could be interrupted should our suppliers not be able to obtain these materials due to higher demand or other factors that interrupt their availability (including as a result of macroeconomic conditions and geopolitical events). Energy and utility prices, including electricity and water prices, and in particular prices for petroleum-based energy sources, are volatile. Increased supplier and customer operating costs arising from volatility in the prices of energy sources, such as increased energy and utility costs and transportation costs, could be passed through to us and we may not be able to increase our product prices sufficiently or at all to offset such increased costs. The impact of any volatility in the prices of energy or the raw materials on which we rely, including the reduction in demand for certain components caused by such price volatility, could result in a loss of net sales and profitability and adversely affect our results of operations.

18

Table of Contents

Our manufacturing operations are dependent upon third-party suppliers, making us vulnerable to supply shortages.

We obtain raw materials, parts and certain components from third-party suppliers. Any delay in receiving supplies (including as a result of the ongoing supply chain constraints) could impair our ability to timely deliver components to our customers and, accordingly, could have an adverse effect on our business, financial condition, results of operations and cash flows. The volatility in the financial markets and uncertainty in the sectors our suppliers service could result in exposure related to the financial viability of certain of our suppliers. Suppliers may also exit certain business lines, causing us to find other suppliers for materials or components and potentially delaying our ability to deliver components to customers, or our suppliers may change the terms on which they are willing to provide parts or materials to us, any of which could adversely affect our financial condition and results of operations. In addition, many of our suppliers have unionized workforces that could be subject to work stoppages as a result of labor relations issues. Some of our suppliers supply components and materials that cannot be quickly or inexpensively re-sourced to another supplier due to long lead times and contractual commitments that might be required by another supplier in order to provide the components or materials.

Increases in the cost of employee benefits could impact our financial results and cash flows.

Our expenses relating to employee health benefits are significant. Unfavorable changes in the cost of and the unpredictability of claims under such benefits, including the current inflationary pressures on benefits (and wages), could impact our financial results and cash flows. Healthcare costs have risen significantly in recent years, and recent legislative and private sector initiatives regarding healthcare reform could result in significant changes to the U.S. healthcare system. Pursuant to the Affordable Care Act, employees may be ineligible for certain healthcare subsidies if such employee is eligible and offered qualifying and affordable healthcare coverage under an employer’s plan. Due to the breadth and complexity of the healthcare reform legislation, the lack of implementing regulations and interpretive guidance and the uncertainty surrounding further reform proposals, we are not able to fully determine the impact that healthcare reform will have in the future on company sponsored medical plans.

Our growth strategy includes acquisitions, and we may not be able to identify attractive acquisition targets or successfully integrate acquired targets without impacting our business.

Acquisitions have played a key role in our growth strategy, and we expect to continue to grow through acquisitions in the future. We expect to continue evaluating potential strategic acquisitions of businesses, assets and product lines. We may not be able to identify suitable candidates, negotiate appropriate or favorable acquisition terms, obtain financing that may be needed to consummate such transactions or complete proposed acquisitions. There is significant competition for acquisition and expansion opportunities in our businesses, which may increase the cost of any acquisition or result in the loss of attractive acquisition targets.

In addition, acquisitions involve numerous risks, including (i) incurring the time and expense associated with identifying and evaluating potential acquisitions and negotiating potential transactions, resulting in management’s attention being diverted from the operation of our existing business; (ii) using estimates and judgments to evaluate credit, operations, funding, liquidity, business, management and market risks with respect to the target entity or assets; (iii) litigation relating to an acquisition, particularly in the context of a publicly held acquisition target, could require us to incur significant expenses or result in the delaying or enjoining of the transaction; (iv) failing to properly identify an acquisition candidate’s liabilities, potential liabilities or risks; and (v) not receiving required regulatory approvals or such approvals being delayed or restrictively conditional. In addition, any acquisitions could involve the incurrence of substantial additional indebtedness or dilution to our shareholders. We cannot assure you that we will be able to successfully integrate any acquisitions that we undertake or that such acquisitions will perform as planned or prove to be beneficial to our operations and cash flow. Any such failure could seriously harm our financial condition, results of operations and cash flows.

19

Table of Contents

We routinely evaluate potential acquisition candidates and engage in discussions and negotiations regarding potential acquisitions; however, even if we execute a definitive agreement for an acquisition, there can be no assurance that we will consummate the transaction within the anticipated closing timeframe, or at all. Further, acquisitions typically involve the payment of a premium over book- and market-value for the target business or asset and, therefore, some dilution of our tangible book value and/or earnings per common share may occur in connection with any future transaction.

If we fail to develop new and innovative processes or if customers in our market do not accept them, our results would be negatively affected.

Our processes must be kept current to meet our customers’ needs. To remain competitive, we therefore must develop new and innovative processes on an ongoing basis. If we fail to make innovations or the market does not accept our new processes, our sales and results would suffer. We invest significantly in the research and development of new processes; however, these expenditures do not always result in processes that will be accepted by the market. To the extent they do not, whether as a function of the process or the business cycle, we will have increased expenses without significant sales to offset such costs. Failure to develop successful new processes may also cause potential customers to purchase from competitors.

We are dependent on information technology and our systems and infrastructure face certain risks, including cyber security risks and data leakage risks.

We are dependent on information technology systems and infrastructure that could be damaged or interrupted by a variety of factors. Any significant breach, breakdown, destruction or interruption of these systems by employees, others with authorized access to our systems or unauthorized persons has the potential to negatively affect our operations. There is also a risk that we could experience a business interruption, theft of information or reputational damage as a result of a cyberattack, such as the infiltration of a data center, or data leakage of confidential information either internally or at our third-party providers. Although we have invested in the protection of our data and information technology to reduce these risks and periodically test the security of our information systems network, there can be no assurance that our efforts will prevent breakdowns or breaches in our systems that could have a material adverse effect on our financial condition, results of operations and liquidity.

We may incur additional expenses and delays due to technical problems or other interruptions at our manufacturing facilities.

Disruptions in operations due to technical problems or power interruptions as well as other interruptions such as floods, fire, other natural disasters, epidemics or pandemics like COVID-19 could adversely affect the manufacturing capacity of our facilities. Such interruptions could cause delays in production and cause us to incur additional expenses such as charges for expedited deliveries for components that are delayed. In addition, our customers have the ability to cancel purchase orders in the event of any delays in production and may decrease future orders if delays are persistent. Additionally, to the extent that such disruptions do not result from damage to our physical property, these may not be covered by our business interruption insurance. Any such disruptions may adversely affect our operations and financial results.

Geopolitical and economic developments could adversely affect our business.

Geopolitical events, increased political instability and social unrest, evidenced by the threat or occurrence of terrorist attacks or conflicts, enhanced national security measures, the risks related to epidemics or pandemics like COVID-19 and the related decline in consumer confidence may hinder our ability to do business. Any escalation in these events or similar future events may disrupt our operations or those of our customers and suppliers and could affect the availability of raw materials and components we need in our manufacturing operations or the means to transport those materials or components to our manufacturing facilities and finished parts to our customers. These events have had and may continue to have an adverse effect, generally, on the economy and consumer confidence and spending, which could adversely affect our net sales and operating results. The effect of these events on the volatility of the financial markets could in the future lead to volatility of the market price of our securities and may limit the capital resources available to us, our customers and our suppliers.

20

Table of Contents

The impact of foreign trade relations and associated tariffs, as well as our reliance on international suppliers for certain raw materials, could adversely impact our business.

We currently source certain raw materials from international suppliers. Import tariffs, taxes, customs duties and/or other trade regulations imposed by the U.S. government on foreign countries, or by foreign countries on the United States, could significantly increase the prices we pay for certain raw materials, such as steel, aluminum and purchased components, that are critical to our ability to manufacture components for our customers. The international sourcing for these materials may also be hurt by health concerns regarding infectious diseases in countries in which these materials are purchased from, adverse weather, natural disasters or geopolitical events. In addition, we may be unable to find a domestic supplier to provide the necessary raw materials on an economical basis in the amounts we require. If the cost of our raw materials increases, or if we are unable to procure the necessary raw materials required to manufacture our components, then we could experience a negative impact on our operating results, profitability, customer relationships and future cash flows.

Additionally, our customers’ businesses may be negatively impacted by import tariffs, taxes, customs duties and/or other trade regulations imposed by the U.S. government on foreign countries or by foreign countries on the United States, which could, in turn, reduce our customers’ demand for the components that we manufacture for them. Any reduction in customer demand for our components as a result of such tariffs, taxes, customs duties and/or other trade regulations, or as a result of the impact of infectious diseases such as COVID-19, could have a material adverse impact on our financial position, results of operations, cash flows and liquidity.

The risks associated with climate change, as well as climate change legislation and regulations, could adversely affect our operations and financial condition.

The physical risks of climate change, such as more frequent or more extreme weather events, changes in temperature and precipitation patterns, changes to ground and surface water availability and other related phenomena, could affect some, or all, of our operations, as well as the operations of our customers and suppliers. Severe weather or other natural disasters could be destructive, which could result in increased costs, including supply chain costs.

In addition, a number of government bodies have finalized, proposed or are contemplating legislative and regulatory changes in response to growing concerns about climate change. In recent years, federal, state and local governments have taken steps to reduce emissions of greenhouse gases (GHGs). The Environmental Protection Agency has finalized a series of GHG monitoring, reporting and emissions control rules for certain large sources of GHGs, and the U.S. Congress has, from time to time, considered adopting legislation to reduce GHG emissions. Numerous states have already taken measures to reduce GHG emissions, primarily through the development of GHG emission inventories and/or regional GHG cap-and-trade programs.

Although it is not possible at this time to predict how future legislation or regulations to address GHG emissions would impact our business, any such laws and regulations imposing reporting obligations on, or limiting emissions of GHGs from, our equipment and operations, could require us to incur costs to reduce GHG emissions associated with our operations. We cannot assure you that our costs, liabilities and obligations relating to environmental matters will not have a material adverse effect on our business, financial condition, results of operations and cash flows.

Our manufacturing, painting and coating operations are subject to environmental, health and safety laws and regulations that could result in liabilities to us.

Our manufacturing, painting and coating operations are subject to environmental, health and safety laws and regulations, including those governing discharges to air and water, the management and disposal of hazardous substances, the cleanup of contaminated sites and health and safety matters. We could incur material costs, including cleanup costs, civil and criminal fines, penalties and third-party claims for cost recovery, property damage or personal injury as a result of violations of or liabilities under such laws and regulations. The ultimate cost of remediating contaminated sites, if any, is difficult to accurately predict and could exceed estimates. In addition, as environmental, health and safety laws and regulations have tended to become stricter, we could incur additional costs complying with requirements that are promulgated in the future.

21

Table of Contents

If our manufacturing processes do not comply with applicable statutory and regulatory requirements, or if we manufacture components containing manufacturing defects, demand for our capabilities may decline and we may be subject to liability claims.

Our manufacturing processes and facilities need to comply with applicable statutory and regulatory requirements. We may also have the responsibility to ensure that the processes we use satisfy safety and regulatory standards, including those applicable to our customers and to obtain any necessary certifications. In addition, our customers’ products, as well as the manufacturing processes and components that we use to produce such products, are often highly complex. As a result, components that we manufacture may at times contain manufacturing defects, and our manufacturing processes may be subject to errors or not be in compliance with applicable statutory and regulatory requirements or demands of our customers. Defects in the components we manufacture, whether caused by a manufacturing or component failure or error, or deficiencies in our manufacturing processes, may result in delayed shipments to customers, replacement costs or reduced or cancelled customer orders. If these defects or deficiencies are significant, our business reputation may also be damaged. The failure of the components that we manufacture for our customers to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing process or facility. In addition, these defects may expose us to liability to pay for the recall of a customer’s product or to indemnify our customers for the costs of any such claims or recalls which they face as a result of using items manufactured by us in their products.

Adverse judgments or settlements in legal disputes, including product liability, intellectual property infringement and other claims, could result in materially adverse monetary damages or injunctive relief and damage our business and/or our reputation.

We are subject to, and may become a party to, a variety of litigation or other claims and suits that arise from time to time in the ordinary course of our business. The results of litigation and other legal proceedings are inherently uncertain and adverse judgments or settlements in some or all of these legal disputes may result in materially adverse monetary damages or injunctive relief against us, or in other adverse consequences to our financial condition and results of operations. Additionally, our insurance policies may not protect us against potential liability due to various exclusions in the policies and self-insured retention amounts. Partially or completely uninsured claims, if successful and of significant magnitude, could have a material adverse effect on our business, financial condition and results of operations. Furthermore, any claims or litigation, even if fully indemnified or insured, could damage our reputation and make it more difficult to compete effectively or obtain adequate insurance in the future.

The components we manufacture can expose us to potential liabilities. For instance, our manufacturing operations expose us to potential product liability claims resulting from injuries caused by defects in components we design or manufacture, as well as potential claims that components we design infringe on third-party intellectual property rights. Such claims could subject us to significant liability for damages, subject the infringing portion of our business to injunction and, regardless of their merits, could be time-consuming and expensive to resolve. We may also have greater potential exposure from warranty claims and recalls due to problems caused by component or product design. Although we have product liability insurance coverage, it may not be sufficient to cover the full extent of our product liability, if at all. A successful product liability claim in excess or outside of our insurance coverage or any material claim for which insurance coverage was denied or limited and for which indemnification was not available could have a material adverse effect on our business, results of operations and/or financial condition.

Any failure to protect our customers’ intellectual property that we use in the products we manufacture for them could harm our customer relationships and subject us to liability.

The products we manufacture for our customers often contain our customers’ intellectual property, including copyrights, patents, trade secrets and know-how. Our success depends, in part, on our ability to protect our customers’ intellectual property. The steps we take to protect our customers’ intellectual property may not adequately prevent its disclosure or misappropriation. If we fail to protect our customers’ intellectual property, our customer relationships could be harmed, and we may experience difficulty in establishing new customer relationships. In addition, our customers might pursue legal claims against us for any failure to protect their intellectual property, possibly resulting in harm to our reputation and our business, financial condition and operating results.

Compliance or the failure to comply with regulations and governmental policies could cause us to incur significant expense.

We are subject to a variety of local and foreign laws and regulations including those relating to labor and health and safety concerns. Such laws may require us to pay mandated compensation and penalties. Additionally, we may need to obtain and maintain licenses and permits to conduct business in various jurisdictions. If we or the businesses or companies we acquire have failed or fail in

22

Table of Contents

the future to comply with such laws and regulations, then we could incur liabilities and fines and our operations could be suspended. Such laws and regulations could also restrict our ability to modify or expand our facilities, could require us to acquire costly equipment, or could impose other significant expenditures.

Because our industry is capital intensive and we have significant fixed and semi-fixed costs, our profitability is sensitive to changes in volume.

The property, plants and equipment needed to produce components for our customers and provide our processes and solutions can be very expensive. We must spend a substantial amount of capital to purchase and maintain such property, plants and equipment. Although we believe our current cash balance, along with our projected internal cash flows and available financing sources, will provide sufficient cash to support our currently anticipated operating and capital needs, if we are unable to generate sufficient cash to purchase and maintain the property, plants and equipment necessary to operate our business, we may be required to reduce or delay planned capital expenditures or to incur additional indebtedness.

Prior to our initial public offering, we were treated as an S Corporation, and claims of taxing authorities related to our prior status as an S Corporation could have an adverse effect on our business, financial condition and results of operations.

Upon the consummation of our initial public offering, our status as an S Corporation was terminated and we have since been treated as a “C Corporation” for U.S. federal income tax purposes and thus are now subject to U.S. federal income tax. If the unaudited, open tax years in which we were an S Corporation are audited by the Internal Revenue Service (IRS), and we determined not to have qualified for, or to have violated any requirement for maintaining our S Corporation status, we will be obligated to pay back taxes, interest and possibly penalties. The amounts that we would be obligated to pay could include taxes on all our taxable income attributable to such open tax years. Any such claims could result in additional costs to us and could have a material adverse effect on our business, financial condition and results of operations.

Prior to the completion of our initial public offering we were 100% owned by the ESOP, which is a retirement plan intended to be tax-qualified. If the ESOP fails to meet the requirements of a tax-qualified retirement plan, we could be subject to substantial penalties.

The ESOP, is a defined contribution retirement plan subject to the requirements of the Internal Revenue Code of 1986, as amended (the Code), and the Employee Retirement Income Security Act of 1974, as amended (ERISA). The ESOP has received a determination letter from the IRS that it meets the requirements of a tax-qualified retirement plan in form and we endeavor to maintain and administer the ESOP in compliance with all requirements of the Code and ERISA. However, the rules regarding tax-qualified plans, and especially ESOPs, are complex and change frequently. Accordingly, it is possible that the ESOP may not have been and may not in the future be administered in full compliance with all applicable rules under the Code or ERISA.

If the IRS were to determine that the ESOP was not in material compliance with the Code or ERISA, then the ESOP could lose its tax-qualified status and we could be subject to substantial penalties under the Code and/or ERISA, which could have a material adverse effect on our business, financial condition or results of operations. Additionally, any retroactive loss of the ESOP’s tax-qualified status would adversely impact our prior treatment as an S Corporation. See “¾Prior to our initial public offering, we were treated as an S Corporation, and claims of taxing authorities related to our prior status as an S Corporation could have an adverse effect on our business, financial condition and results of operations.”

Risks Related to Our Indebtedness

Our Amended and Restated Credit Agreement restricts our ability and the ability of our subsidiaries to engage in some business and financial transactions.

On September 26, 2019, and as last amended as of March 31, 2022, we entered into an amended and restated credit agreement (Credit Agreement) with certain lenders and Wells Fargo Bank, National Association, as administrative agent. The Credit Agreement provides for (i) a $200.0 million revolving credit facility (the Revolving Loan), with a letter of credit sub-facility in an aggregate amount not to exceed $5.0 million, and a swingline facility in an aggregate amount of $20.0 million. The Credit Agreement also provides for an additional $100.0 million of capacity through an accordion feature.

23

Table of Contents

Our Credit Agreement contains a number of covenants that limit our ability and the ability of our subsidiaries to:

create, incur or assume indebtedness (other than certain permitted indebtedness);
create or incur liens (other than certain permitted liens);
make investments (other than certain permitted investments);
merge or consolidate with another entity;
make asset dispositions (other than certain permitted dispositions);
declare or pay any dividend or any other distribution to shareholders;
enter into transactions with affiliates;
make certain organizational changes, including changing our fiscal year end or amending our organizational documents;
enter into any agreement further restricting our ability to create or assume any lien;
sell notes receivable or accounts receivable except under certain circumstances;
enter into sale leaseback transactions;
incur capital expenditures in excess of $35.0 million in any fiscal year (or in excess of $65.0 million and $70.0 million in 2022 and 2021, respectively);
permit any person or group other than the ESOP or other employee benefit plan of ours (like our 401(k) plan) to own or control more than 35% of our equity interests; or
permit our Board of Directors to not be composed of a majority of our continuing directors (i.e., our directors as of September 26, 2019 and any additional or replacement directors that have been approved by at least 51% of the directors then in office).

Our Credit Agreement also requires us to maintain a minimum interest coverage ratio and a consolidated total leverage ratio, and contains certain customary representations and warranties, affirmative covenants and events of default (including, among others, payment default, covenant default, breach of representation or warranty, bankruptcy, cross-default, material ERISA events, certain changes of control, material money judgements and failure to maintain subsidiary guarantees). If an event of default occurs under the Credit Agreement, the lenders under the Credit Agreement will be entitled to take various actions, including the acceleration of amounts due thereunder, the termination of such credit facility and all actions permitted to be taken by a secured creditor. Our failure to comply with our obligations under the Credit Agreement may result in an event of default under the Credit Agreement. A default, if not cured or waived, may permit acceleration of our indebtedness. If our indebtedness is accelerated, we cannot be certain that we will have sufficient funds available to pay the accelerated indebtedness or that we will have the ability to refinance the accelerated indebtedness on terms favorable to us or at all.

We are able to incur additional debt, which could reduce our ability to satisfy our current obligations under our existing indebtedness.

At December 31, 2022, we had $72.2 million outstanding under the Revolving Loan. In addition, we may be able to incur significant additional indebtedness in the future, and we may do so, among other reasons, to fund acquisitions as part of our growth strategy. Although the Credit Agreement contains restrictions on the incurrence of additional indebtedness, these restrictions are subject to a number of qualifications and exceptions, and we could incur substantial additional indebtedness in compliance with these restrictions.

24

Table of Contents

Risks Related to Ownership of Our Common Stock

Your ability to influence corporate matters may be limited because the ESOP and our 401(k) plan own a substantial amount of our stock and continue to have significant influence over us, which may limit your ability to influence the outcome of important transactions, including a change in control.

As of December 31, 2022, our employees and certain former employees, through their interests in the ESOP and the Mayville Engineering Company, Inc. 401(k) Plan (the 401(k) Plan), beneficially owned approximately 45% of the outstanding shares of our common stock. Each participant in the ESOP and the 401(k) Plan is entitled to direct the vote of the shares allocated to his or her accounts, in his or her sole discretion. As a result, our employees and former employees, if acting together, will be able to influence or control matters requiring approval by our shareholders, including the election of directors, influence over our management and policies and the approval of mergers, acquisitions or other extraordinary transactions. As employees and former employees, the ESOP and 401(k) Plan participants’ interests may be contrary to other investors. This concentration of ownership may have the effect of delaying, preventing or deterring a change in control of our company, could deprive our non-ESOP and non-401(k) Plan shareholders of an opportunity to receive a premium for their common stock as part of a sale of our company and might ultimately affect the market price of our common stock.

The Trustees of the ESOP and the 401(k) Plan may have the power to vote a large block of shares on matters presented to shareholders for approval.

ESOP and 401(k) Plan participants have the right to direct the vote of the shares allocated to his or her ESOP and 401(k) Plan accounts. However, if a participant does not timely direct the voting of his or her shares, then (1) GreatBanc Trust Company (the ESOP Trustee) will vote such shares in its independent fiduciary discretion and (2) Principal Trust Company (the 401(k) Plan Trustee) will vote such shares as directed by the 401(k) Plan sponsor, which is the Company. Additionally, the ESOP Trustee and the 401(k) Plan Trustee have fiduciary duties under ERISA which may cause the ESOP Trustee or the 401(k) Plan Trustee to override participants’ voting discretions. Consequently, there may be circumstances in which the ESOP Trustee and the 401(k) Plan Trustee have the ability to vote a significant block of shares on matters presented to shareholders for approval. The ESOP and the 401(k) Plan, which as retirement plans have the purpose of providing retirement benefits to current and former employees of the Company and their beneficiaries, may have interests that are different from other investors and may vote in a way with which other shareholders disagree and which may be adverse to other shareholders interests.

The market price of our common stock may be volatile, and you could lose all or part of your investment.

Since our initial public offering in May 2019, the market price of our common stock has been volatile and has been and could continue to be subject to wide fluctuations in response to various factors, some of which are beyond our control. These fluctuations could cause investors to lose all or part of their investment in our common stock. Factors that could cause fluctuations in the market price of our common stock include the following: sales of substantial amounts of our securities by our directors, executive officers or significant shareholders (including our current and former employees via the ESOP and the 401(k) Plan) or the perception that such sales could occur; general economic and geopolitical conditions, inflation, interest rates, tariffs, fuel prices, international currency fluctuations, recessionary concerns and acts of war or terrorism; price and volume fluctuations in the overall stock market from time to time; relatively small percentage of our common stock available publicly; actual or anticipated fluctuations in our quarterly financial results or the quarterly financial results of companies perceived to be similar to us; changes in the market’s expectations about our operating results; changes in our orders in a given period; success of competitors; our operating results failing to meet the expectation of securities analysts or investors in a particular period; changes in financial estimates and recommendations by securities analysts concerning us or the markets in general; operating and stock price performance of other companies that investors deem comparable to us; our ability to manufacture new and enhanced components for the products of our customers on a timely basis; changes in laws and regulations affecting our business; commencement of, or involvement in, litigation involving us; changes in our capital structure, such as future issuances of securities or the incurrence of additional debt; the volume of securities available for public sale; any major change in our Board of Directors or management; and changes in our investor base.

In the past, following periods of volatility in the overall market and the market price of a particular company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.

25

Table of Contents

We do not expect to declare any dividends in the foreseeable future.

The continued operation and growth of our business, including acquisitions and capital expenditures, will require substantial cash. Accordingly, we do not anticipate declaring any cash dividends to holders of our common stock in the foreseeable future. Any determination to pay dividends in the future will be at the discretion of our Board of Directors and will depend upon results of operations, financial condition, any contractual restrictions, our indebtedness, restrictions imposed by applicable law and other factors our Board of Directors deem relevant. Consequently, investors may need to sell all or part of their holdings of our common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investment.

Some provisions of Wisconsin law and our articles of incorporation and bylaws could make a merger, tender offer or proxy contest difficult, thereby depressing the trading price of our common stock.

Our status as a Wisconsin corporation and the anti-takeover provisions of the Wisconsin Business Corporation Law (the WBCL) may discourage, delay or prevent a change in control even if a change in control would be beneficial to our shareholders by prohibiting us from engaging in a business combination with an interested shareholder for a period of three years after the person becomes an interested shareholder. We may engage in a business combination with an interested shareholder after the expiration of the three-year period with respect to that shareholder only if one or more of the following conditions is satisfied: (i) our Board of Directors approved the acquisition of the stock before the date on which the shareholder acquired the shares, (ii) the business combination is approved by a majority of our outstanding voting stock not beneficially owned by the interested shareholder or (iii) the consideration to be received by shareholders meets certain fair prices requirements of the WBCL with respect to form and amount.

In addition, our articles of incorporation and bylaws contain provisions that may make the acquisition of the company more difficult, including the following:

establishing a classified Board of Directors so that not all members of our Board of Directors are elected at one time, which could delay the ability of shareholders to change the membership of a majority of our Board of Directors;
authorizing undesignated preferred stock, the terms of which may be established and shares of which may be issued by our Board of Directors without shareholder approval;
requiring certain procedures to be satisfied in order for a shareholder to call a special meeting of shareholders, including requiring that we receive written demands for a special meeting from holders of 10% or more of all the votes entitled to be cast on any issue proposed to be considered;
requiring that a director may be removed from office only for “cause” and with the affirmative vote of shareholders holding at least 66 2/3% of the then outstanding shares of stock entitled to vote in the election of directors;
not providing for cumulative voting in the election of directors, which would otherwise allow holders of less than a majority of stock to elect some directors; and
establishing advance notice procedures for shareholder proposals or the nomination of candidates for election as directors.

These provisions could have the effect of discouraging, delaying or preventing a transaction involving a change in control of the Company. These provisions could also have the effect of discouraging proxy contests and make it more difficult for shareholders to elect directors of their choosing or prevent us from taking other corporate actions that shareholders may desire.

Risks Related to Being a Relatively New Public Company

We are an emerging growth company, and any decision on our part to comply only with certain reduced reporting and disclosure requirements applicable to emerging growth companies could make our common stock less attractive to investors.

We are an “emerging growth company” as defined by the Jumpstart Our Business Startups Act of 2012 (JOBS Act). Under the JOBS Act, emerging growth companies can delay adopting new or revised accounting standards until such time as those standards

26

Table of Contents

apply to private companies. We have elected to use this exemption from new or revised accounting standards and, therefore, we will not be subject to the same new or revised accounting standards as other public companies that have not made this election.

In addition, as an emerging growth company under the JOBS Act we are only subject to one portion of Section 404 of the Sarbanes-Oxley Act of 2002 at this time—management reporting on the assessment of internal control over financial reporting (we are not currently required to have our independent auditors issue a report addressing these assessments). Assuming we have not ceased to qualify as an “emerging growth company” earlier, we will be required to comply with both the management and the auditor assessment of internal control over financial reporting requirements of Section 404 at the time we file our annual report for 2024.

For as long as we continue to be an emerging growth company, we also intend to take advantage of certain other exemptions from various reporting requirements that are applicable to other public companies including, but not limited to, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. We cannot predict if investors will find our common stock less attractive because we will rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

We will remain an emerging growth company until the earliest of (i) the last day of the year which we have total annual gross revenue of $1.07 billion or more; (ii) the last day of the year following the fifth anniversary of the date of the closing of our initial public offering; (iii) the date on which we have issued more than $1.0 billion in nonconvertible debt during the previous three years; or (iv) the date on which we are deemed to be a large accelerated filer under the rules of the SEC.

Item 1B. Unresolved Staff Comments.

None.

27

Table of Contents

Item 2. Properties.

We maintain 20 strategically located U.S. facilities comprising approximately three million square feet of manufacturing space with our headquarters in Mayville, WI. We believe that our facilities are sufficient to meet our current and near-term manufacturing needs.

Approximate 

Facility

    

Description of Use

    

Square Feet

    

Ownership

1. Mayville, WI

Manufacturing / Corporate Headquarters

340,000

Owned

2. Beaver Dam, WI

 

Manufacturing

 

303,000

 

Owned

3. Hazel Park, MI

Manufacturing

263,000

(1)

Leased

4. Defiance, OH

 

Manufacturing

 

250,000

 

Owned

5. Defiance, OH

 

Manufacturing

 

192,000

 

Owned

6. Heber Springs, AR

 

Manufacturing

 

190,000

 

Owned

7. Bedford, PA

 

Manufacturing

 

181,000

 

Leased

8. Mayville, WI

 

Manufacturing

 

167,000

 

Owned

9. Beaver Dam, WI

 

Manufacturing

 

163,000

 

Owned

10. Wautoma, WI

 

Manufacturing

 

157,000

 

Owned

11. Atkins, VA

 

Manufacturing

 

150,000

 

Owned

12. Byron Center, MI

 

Manufacturing

 

138,000

 

Leased

13. Defiance, OH

 

Manufacturing

 

90,000

 

Leased

14. Greenville, MS

 

Manufacturing

 

76,000

 

Leased

15. Wayland, MI

 

Manufacturing

 

75,000

 

Leased

16. Neillsville, WI

 

Manufacturing

 

58,000

 

Owned

17. Vanderbilt, MI

 

Manufacturing

 

50,000

 

Owned

18. Neillsville, WI

 

Manufacturing

 

42,000

 

Owned

19. Vanderbilt, MI

 

Manufacturing

 

40,000

 

Owned

20. Piedmont, MI

 

Manufacturing

 

34,000

 

Leased

TOTAL

 

  

 

2,959,000

 

  

(1)Excludes approximately 182,000 square feet of subleased manufacturing space starting in June 2022.

Item 3. Legal Proceedings.

From time to time, we may be a party to litigation and subject to claims incident to the ordinary course of business. Regardless of the outcome, litigation can have an adverse impact on us because of defense and settlement costs, diversion of management resources and other factors. Also see Note 8 – Contingencies in the Notes to the Consolidated Financial Statements for additional information.

Item 4. Mine Safety Disclosures.

Not applicable.

28

Table of Contents

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Price Information

Our common stock is traded on the New York Stock Exchange under the symbol MEC. As of February 1, 2023, there were five registered shareholders of record of our common stock and thousands of beneficial holders of our common stock, including all the participants in our ESOP and many participants in our 401(k) Plan.

We have never declared or paid any cash dividends on our common stock. We intend to retain all available funds and any future earnings for use in the operation and expansion of our business and do not anticipate declaring or paying any cash dividends in the foreseeable future. Any future determination as to the declaration and payment of dividends will be at the discretion of our Board of Directors and will depend on then-existing conditions, including our financial condition, results of operations, contractual restrictions, capital requirements, business prospects and other factors that our Board of Directors considers relevant. In addition, the terms of the Credit Agreement restrict our ability to pay cash dividends to the holders of our common stock.

Issuer Purchases of Equity Securities

The table below sets forth information with respect to purchases we made of shares of our common stock during the three months ended December 31, 2022:

Total Number 

Dollar Value of 

of Shares 

Shares that 

Total 

Purchased as 

May Yet Be 

Number 

Part of Publicly 

Purchased 

of Shares 

Average Price 

Announced Plans 

Under the Plans 

Period

    

Purchased

    

Paid per Share

    

or Programs (1)

    

or Programs (1)

October 2022

$

$

18,552,679

November 2022

$

$

18,552,679

December 2022

$

$

18,552,679

Total

 

 

 

 

  

(2)On October 28, 2019, our Board of Directors approved an increase of our prior share repurchase program from $4.0 million to $25.0 million shares of our common stock through 2021. On October 19, 2021, the Board of Directors approved a new share repurchase program of up to $25.0 million of shares of our common stock through 2023. The new share repurchase program replaced the prior program.

29

Table of Contents

Stock Performance Graph

The following graph compares the total return on our common stock since the time of the Company’s IPO with similar returns on the Standard & Poor’s (S&P) SmallCap 600 Index and the Dow Jones Industrial Average Index. The graph assumes a $100 investment with the reinvestment of any dividends.

COMPARISON OF CUMULATIVE TOTAL RETURN

Among Mayville Engineering Company, Inc., the S&P SmallCap 600 Index and

The Dow Jones Industrial Average

Graphic

    

5/9/2019

    

12/31/2019

12/31/2020

    

12/31/2021

    

12/31/2022

Mayville Engineering Company, Inc.

$

100.00

$

55.18

$

78.94

$

87.71

$

74.47

S&P SmallCap 600

$

100.00

$

106.11

$

116.26

$

145.65

$

120.27

Dow Jones Industrial Average

$

100.00

$

109.90

$

117.87

$

139.94

$

127.65

Securities Authorized For Issuance Under Equity Compensation Plans

See Part III, Item 12, of this Annual Report on Form 10-K for certain information regarding our equity compensation plans.

Item 6. Reserved.

30

Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Management’s Discussion and Analysis of Financial Condition and Results of Operations is intended to assist in understanding and assessing the trends and significant changes in our results of operations and financial condition. Historical results may not be indicative of future performance. This discussion includes forward-looking statements that reflect our plans, estimates and beliefs. Such statements involve risks and uncertainties. Our actual results may differ materially from those contemplated by these forward-looking statements as a result of various factors, including those set forth in “Risk Factors” in Part I, Item 1A and “Cautionary Statement Regarding Forward-Looking Statements” of this Annual Report on Form 10-K. This discussion should be read in conjunction with our audited consolidated financial statements and the notes thereto included in Part II, Item 8 of this Annual Report on Form 10-K. In this discussion, we use certain financial measures that are not prepared in accordance with accounting principles generally accepted in the United States of America (GAAP). Explanation of these non-GAAP financial measures and reconciliation to the most directly comparable GAAP financial measures are included in this Management’s Discussion and Analysis of Financial Condition and Results of Operations. Investors should not consider non-GAAP financial measures in isolation or as substitutes for financial information presented in compliance with GAAP.

All amounts are presented in thousands except share amounts, per share data, years and ratios.

Critical Accounting Policies and Estimates

Critical accounting policies are those policies that, in management’s view, are most important in the portrayal of our financial condition and results of operations. The notes to the consolidated financial statements include full disclosure of significant accounting policies. The methods, estimates, and judgments that we use in applying our accounting policies have a significant impact on the results that we report in our financial statements. These critical accounting policies require us to make difficult and subjective judgments, often as a result of the need to make estimates regarding matters that are inherently uncertain. Those critical accounting policies and estimates that require the most significant judgment are discussed further below. See Note 1 – Nature of Business and summary of significant accounting policies, in the Notes to the Consolidated Financial Statements in Part II, Item 8 of this Annual Report on Form 10-K for more specifics.

Goodwill, Intangible Assets and Other Long-Lived Assets

Our long-lived assets consist primarily of property, equipment, purchased intangible assets and goodwill. The valuation and the impairment testing of these long-lived assets involve significant judgments and assumptions, particularly as they relate to the identification of reporting units, asset groups and the determination of fair value.

We test our tangible and intangible long-lived assets subject to amortization for impairment whenever facts and circumstances indicate that the carrying amount of an asset may not be recoverable. We test goodwill and indefinite lived intangible assets for impairment annually, or more frequently if triggering events occur indicating that there may be impairment.

We have recorded goodwill and perform testing for potential goodwill impairment at a reporting unit level. A reporting unit is an operating segment, or a business unit one level below an operating segment for which discrete financial information is available, and for which management regularly reviews the operating results. Additionally, components within an operating segment can be aggregated as a single reporting unit if they have similar economic characteristics. We have concluded we have one reporting unit.

We determine the fair value of our reporting unit using an income approach. Under the income approach, we calculate the fair value of a reporting unit based on the present value of estimated future cash flows. The income approach is dependent on several key management assumptions, including estimates of future sales, gross margins, operating costs, interest expense, income tax rates, capital expenditures, changes in working capital requirements and the weighted average cost of capital or the discount rate. Discount rate assumptions include an assessment of the risk inherent in the future cash flows of the reporting unit. Expected cash flows used under the income approach are developed in conjunction with our budgeting and forecasting process.

We test our goodwill for impairment on an annual basis, and more frequently if events or changes in circumstances indicate that it might be impaired. For the years ended December 31, 2022 and 2021, there were no events or changes in circumstances that would indicate a material impairment of our goodwill.

31

Table of Contents

Changes to management assumptions and estimates utilized in the income approach could negatively impact the fair value conclusions for our reporting unit resulting in goodwill impairment. All key assumptions and valuations are determined by and are the responsibility of management. The factors used in the impairment analysis are inherently subject to uncertainty. We believe that the estimates and assumptions are reasonable to determine the fair value of our reporting unit, however, if actual results are not consistent with these estimates and assumptions, goodwill and other intangible assets may be overstated which could trigger an impairment charge.

For impairment testing of long-lived assets, we identify asset groups at the lowest level for which identifiable cash flows are largely independent of the cash flows of other groups of assets and liabilities. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset group to estimated undiscounted future cash flow expected to be generated by the assets. If the carrying amount of an asset group exceeds its estimated future cash flows, an impairment charge is recognized by the amount by which the carrying amount of the asset exceeds the estimated fair value of the asset group. For the twelve months ended December 31, 2021, the Company recorded an impairment of its long-lived assets in the amount of $16,151. Please refer to Note 2 – Select Balance Sheet Data in the Notes to Consolidated Financial Statements for further discussion of the facts and circumstances that led to this impairment. For the year ended December 31, 2022, there were no events or changes in circumstances that indicated a material impairment of our long-lived assets.

Determining the useful life of an intangible asset also requires judgment. Certain intangible assets are expected to have indefinite lives based on their history and our plans to continue to support and build the acquired brands. Other acquired intangible assets such as customer relationships, trade names, and non-compete agreements are expected to have determinable useful lives. The costs of determinable-lived intangibles are amortized to expense over their estimated lives.

Income Taxes

The provision for, or benefit from, income taxes includes deferred taxes resulting from temporary differences in income for financial and tax purposes using the liability method. Such temporary differences result primarily from differences in the carrying value of assets and liabilities. Future realization of deferred income tax assets requires sufficient taxable income within the carryback and/or carryforward period available under tax law.

The Company evaluates on a quarterly basis whether, based on all available evidence, it is probable that the deferred income tax assets are realizable. Valuation allowances are established when it is estimated that it is more likely than not that the tax benefit of the deferred tax asset will not be realized. The evaluation includes the consideration of all available evidence, both positive and negative, regarding the estimated future reversals of existing taxable temporary differences, estimated future taxable income exclusive of reversing temporary differences and carryforwards, historical taxable income in prior carryback periods if carryback is permitted, and potential tax planning strategies which may be employed to prevent an operating loss or tax credit carryforward from expiring unused. The verifiable evidence such as future reversals of existing temporary differences and the ability to carryback are considered before the subjective sources such as estimate future taxable income exclusive of temporary differences and tax planning strategies. Additionally, we record uncertain tax positions at their net recognizable amount, based on the amount that management deems is more likely than not to be sustained upon ultimate settlement with the tax authorities in jurisdictions in which we operate.

Revenue recognition

The Company recognizes revenue for the transfer of goods or services to a customer in an amount that reflects the consideration it expects to receive in exchange for those goods or services. The Company enters into supply agreements and purchase orders that include both free on board (FOB) origin and FOB destination shipping terms. Depending on the terms of the agreement, the customer takes ownership at shipment or at delivery, and this is when control transfers. Sales are supported by documentation such as supply agreements and purchase orders, which specify certain terms and conditions including product specifications, quantities, fixed prices, delivery dates and payments terms. Revenue related to services is recognized in the period in which the services are performed, thus the Company recognizes revenue at a point in time.

There are many customers where the Company designs, engineers and builds production tooling, which is purchased by the customer. Most of the tooling revenue is complete at the point the customer signs off on the product through the Product Part Approval Process (PPAP) and the tool is placed into service. Revenue is recognized when control of the tooling promised under a

32

Table of Contents

contract is transferred to the customer either at a point in time or over a period of time in an amount that reflects the consideration to which the Company expects to be entitled in exchange for the goods or services.

The Company offers certain customers discounts for early payments. These discounts are recorded against net sales in the Consolidated Statement of Comprehensive Income (Loss) and accounts receivable in the Consolidated Balance Sheets. The Company does not offer any other customer incentives, rebates or allowances.

ESOP

Under the ESOP, the Company can make annual discretionary contributions to the trust for the benefit of eligible employees in the form of cash or shares of common stock of the Company subject to approval by the Board of Directors. The stock in the ESOP is held in trust for the sole benefit of the participants. Shares allocated to a participant’s account are fully vested. For each of the twelve months ended December 31, 2022, 2021, and 2020, the Company recorded no ESOP expense. The Company elected to make annual discretionary contributions to the 401(k) Plan in these years, providing participants the opportunity to diversify their shares of common stock of the Company if they choose to.

Upon retirement, death, termination of employment or exercise of diversification rights, the eligible portion of a participant’s ESOP account is redeemable annually at the current price per share of the stock. Under the terms of the ESOP prior to the IPO, we were obligated to redeem eligible participant account balances for cash (in accordance with the redemption schedule and subject to the limitations set forth in the ESOP). Following the IPO, (i) we no longer redeem participants’ ESOP interests, as distributions from the ESOP made to a participant following retirement, death or termination of employment, or the exercise of diversification rights under the Traditional ESOP, will be made in our common stock, and upon receiving a distribution of our common stock from the ESOP a participant will be able to sell such shares of common stock in the market, subject to any requirements of federal securities law; and (ii) with respect to any participant who exercises statutory diversification rights under the ESOP, the ESOP Trustee will sell, on behalf of the participant, the shares that the participant has elected to diversify and reinvest the sale proceeds in an alternate investment option as directed by the participant.

Emerging Growth Company

The JOBS Act permits an “emerging growth company” like us to take advantage of an extended transition period to comply with new or revised accounting standards applicable to public companies. We are choosing to use this provision and, as a result, we will comply with new or revised accounting standards as required for private companies.

Internal Controls and Procedures

Our management is responsible for establishing and maintaining adequate internal control over financial reporting for our company. Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with GAAP. Internal control over financial reporting includes maintaining records that in reasonable detail accurately and fairly reflect our transactions; providing reasonable assurance that transactions are recorded as necessary for preparation of our financial statements; providing reasonable assurance that receipts and expenditures of our assets are made in accordance with management’s authorization; and providing reasonable assurance that unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements would be prevented or detected on a timely basis. Because of its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that a misstatement of our financial statements would be prevented or detected. Furthermore, our controls and procedures can be circumvented by the individual acts of some persons, by collusion of two or more people or by management override of the control, and misstatements due to error or fraud may occur and not be detected on a timely basis.

Overview

MEC is a leading U.S.-based value-added manufacturing partner that provides a full suite of services from concept to production, including prototyping and tooling, production fabrication, coating, assembly and aftermarket components. Our customers operate in diverse end markets, including heavy- and medium-duty commercial vehicles, construction & access equipment,

33

Table of Contents

powersports, agriculture, military and other end markets. We have developed long-standing relationships with our blue-chip customers based upon a high level of experience, trust and confidence.

Our one operating segment focuses on producing metal components that are used in a broad range of heavy- and medium-duty commercial vehicles, construction & access equipment, powersports, agricultural, military and other products.

COVID-19 Impact and Macroeconomic Conditions

The COVID-19 pandemic has had, and could continue to have, a negative impact on our business, financial condition, cash flows, results of operations, supply chain and raw material availability, although the full extent is still uncertain and cannot be predicted.

For the twelve months ended December 31, 2020, net sales reflected the significant disruption we encountered primarily due to COVID-19 pandemic with customer shutdowns, demand changes, and continued destocking, which were most apparent in the commercial vehicle, agriculture and construction & access equipment end markets served. Despite MEC and its customer base carrying the essential business designation, customer production facilities shut down for 5 – 6 weeks on average during the second quarter of 2020 due to the pandemic. As a direct result of the customer shutdowns, MEC temporarily halted production at some of its facilities during the second quarter. Customer manufacturing facilities gradually reopened toward the end of the second quarter, but MEC production volumes remained below pre-pandemic levels through the remainder of the year with all MEC facilities open. Despite the decline in volumes for the second, third and fourth quarters of 2020 due to the pandemic, all pre-existing customer relationships and manufacturing programs remained intact.

For the twelve months ended December 31, 2021 and 2022, net sales reflected the ongoing supply chain constraints impacting many of our customers. Additionally, we continue to experience the macroeconomic conditions that originated during the pandemic, including inflationary pressures on wages, benefits, materials and manufacturing supplies due to a higher level of competition for employees and materials.

How We Assess Performance

Net Sales. Net sales reflect sales of our components and products net of allowances for returns and discounts. In addition to current macroeconomic conditions and the COVID-19 pandemic, several factors affect our net sales in any given period, including weather, timing of acquisitions and the production schedules of our customers. Net sales are recognized at the time of shipment or at delivery to the customer.

Manufacturing Margins. Manufacturing margins represents net sales less cost of sales. Cost of sales consists of all direct and indirect costs used in the manufacturing process, including raw materials, labor, equipment costs, depreciation, lease expenses, subcontract costs and other directly related overhead costs. Our cost of sales is directly affected by the fluctuations in commodity prices, primarily sheet steel and aluminum, but these changes are largely mitigated by contractual agreements with our customers that allow us to pass through these price variations based upon certain market indexes.

Depreciation and Amortization. We carry property, plant and equipment on our balance sheet at cost, net of accumulated depreciation and amortization. Depreciation on property, plant and equipment is computed on a straight-line basis over the estimated useful life of the asset. Amortization expense is the periodic expense related to leasehold improvements and intangible assets. Leasehold improvements are amortized over the lesser of the life of the underlying asset or the remaining lease term. Our intangible assets were recognized as a result of certain acquisitions and are generally amortized on a straight-line basis over the estimated useful lives of the assets.

Other Selling, General, and Administrative Expenses. Other selling, general and administrative expenses consist primarily of salaries and personnel costs for our sales and marketing, finance, human resources, information systems, administration and certain other managerial employees and corporate level administrative expenses such as incentive compensation, audit, accounting, legal and other consulting and professional services, travel and insurance.

34

Table of Contents

Other Key Performance Indicators

EBITDA, EBITDA Margin, Adjusted EBITDA and Adjusted EBITDA Margin

EBITDA represents net income (loss) before interest expense, provision (benefit) for income taxes, depreciation and amortization. EBITDA Margin represents EBITDA as a percentage of net sales for each period.

Adjusted EBITDA represents EBITDA before CEO transition costs, stock-based compensation, Hazel Park transition costs due to the former fitness customer, restructuring expenses related to the closure of the Greenwood facility and impairment charges on long-lived assets and inventory and (gain) loss on contracts specifically purchased to meet obligations under the agreement with our former fitness customer. Adjusted EBITDA Margin represents Adjusted EBITDA as a percentage of net sales for each period. These metrics are supplemental measures of our operating performance that are neither required by, nor presented in accordance with, GAAP. These measures should not be considered as an alternative to net income (loss) or any other performance measure derived in accordance with GAAP as an indicator of our operating performance. We present Adjusted EBITDA and Adjusted EBITDA Margin as management uses these measures as key performance indicators, and we believe they are measures frequently used by securities analysts, investors and other parties to evaluate companies in our industry. These measures have limitations as analytical tools and should not be considered in isolation or as substitutes for analysis of our results as reported under GAAP.

Our calculation of EBITDA, EBITDA Margin, Adjusted EBITDA and Adjusted EBITDA Margin may not be comparable to the similarly named measures reported by other companies. Potential differences between our measures of EBITDA and Adjusted EBITDA compared to other similar companies’ measures of EBITDA and Adjusted EBITDA may include differences in capital structure and tax positions.

The following table presents a reconciliation of net income (loss) and comprehensive income (loss), the most directly comparable measure calculated in accordance with GAAP, to EBITDA and Adjusted EBITDA, and the calculation of EBITDA Margin and Adjusted EBITDA Margin for each of the periods presented.

Twelve Months Ended

 

December 31, 

 

    

2022

    

2021

    

2020

 

Net income (loss) and comprehensive income (loss)

$

18,727

$

(7,451)

$

(7,092)

 

Interest expense

 

3,380

2,003

2,668

Provision (benefit) for income taxes

 

3,667

(1,943)

(2,074)

Depreciation and amortization

 

29,311

31,783

32,089

EBITDA

 

55,085

 

24,392

 

25,591

CEO transition costs

 

1,512

IPO stock-based compensation expense

 

1,029

Stock-based compensation expense

 

3,759

4,962

3,703

Hazel Park transition costs due to former fitness customer

 

4,768

Greenwood restructuring charges

2,524

Impairment of inventory and loss on contracts

 

700

Impairment of long-lived assets and (gain) loss on contracts

 

(4,346)

16,151

Adjusted EBITDA

$

60,778

$

46,205

$

32,847

Net sales

$

539,392

$

454,826

$

357,606

EBITDA Margin

 

10.2

%  

 

5.4

%  

 

7.2

%

Adjusted EBITDA Margin

 

11.3

%  

 

10.2

%  

 

9.2

%

35

Table of Contents

Consolidated Results of Operations

Twelve Months Ended December 31, 2022 Compared to Twelve Months Ended December 31, 2021

Twelve Months Ended December 31, 

 

2022

2021

Increase (Decrease)

 

% of Net 

% of Net 

Amount

 

    

Amount

    

Sales

    

Amount

    

Sales

    

Change

    

% Change

Net sales

$

539,392

100.0

%  

$

454,826

100.0

%  

$

84,566

18.6

%

Cost of sales

478,323

88.7

%  

403,451

88.7

%  

74,872

18.6

%

Manufacturing margins

61,069

11.3

%  

51,375

11.3

%  

9,694

18.9

%

Amortization of intangible assets

 

6,952

 

1.3

%  

10,706

 

2.4

%  

(3,754)

 

(35.1)

%

Profit sharing, bonuses and deferred compensation

 

7,997

 

1.5

%  

11,500

 

2.5

%  

(3,503)

 

(30.5)

%

Other selling, general and administrative expenses

 

24,692

 

4.6

%  

20,409

 

4.5

%  

4,283

 

21.0

%

Impairment of long-lived assets and (gain) loss on contracts

 

(4,346)

 

(0.8)

%  

16,151

 

3.6

%  

(20,497)

 

(126.9)

%

Income (loss) from operations

 

25,774

 

4.8

%  

(7,391)

 

(1.6)

%  

33,165

 

448.7

%

Interest expense

 

(3,380)

 

0.6

%  

(2,003)

 

0.4

%  

1,377

 

68.7

%

Provision (benefit) for income taxes

 

3,667

 

0.7

%  

(1,943)

 

(0.4)

%  

5,610

 

288.7

%

Net income (loss) and comprehensive income (loss)

$

18,727

 

3.5

%  

$

(7,451)

 

(1.6)

%  

$

26,178

 

351.3

%

EBITDA

$

55,085

 

10.2

%  

$

24,392

 

5.4

%  

$

30,693

 

125.8

%

Adjusted EBITDA

$

60,778

 

11.3

%  

$

46,205

 

10.2

%  

$

14,573

 

31.5

%

Net Sales. Net sales were $539,392 for the twelve months ended December 31, 2022 as compared to $454,826 for the twelve months ended December 31, 2021, an increase of $84,566, or 18.6%. This change was primarily due to customer raw material pricing pass-throughs, volume increases as end market demand strengthened and customer restocking efforts due to historically low customer inventories, and commercial pricing increases. These increases were partially offset by customer supply chain issues.

Manufacturing Margins. Manufacturing margins were $61,069 for the twelve months ended December 31, 2022 as compared to $51,375 for the twelve months ended December 31, 2021, an increase of $9,694, or 18.9%. The increase was driven by greater demand, the impact of commercial pricing increases and improved absorption of manufacturing overhead costs, offset by Hazel Park transition and launch costs, continued customer supply chain issues, and a decline in scrap income during the second half of the current year.

Manufacturing margin percentages were 11.3% for both the twelve months ended December 31, 2022 and 2021.

Amortization of Intangible Assets. Amortization of intangible assets were $6,952 for the twelve months ended December 31, 2022 as compared to $10,706 for the twelve months ended December 31, 2021, a decrease of $3,754, or 35.1%. The decrease is due to the full amortization of certain intangible assets.

Profit Sharing, Bonuses and Deferred Compensation Expenses. Profit sharing, bonuses and deferred compensation expenses were $7,997 for the twelve months ended December 31, 2022 as compared to $11,500 for the twelve months ended December 31, 2021, a decrease of $3,503, or 30.5%. The decrease is primarily driven by a reduction in deferred compensation expense as a result of fluctuations within the financial markets.

Other Selling, General and Administrative Expenses. Other selling, general and administrative expenses were $24,692 for the twelve months ended December 31, 2022 as compared to $20,409 for the twelve months ended December 31, 2021, an increase of $4,283, or 21.0%. The increase was mainly driven by higher consulting, legal, and professional fees, CEO transition costs, wages and benefits due to continued inflationary pressures, information technology, and travel and entertainment expenses.

Impairment of Long-Lived Assets and (Gain) Loss on Contracts. At December 31, 2021, there was uncertainty as to the level of demand from the former fitness customer. The Company received a notification from this customer in February 2022 resulting in a change in forecasted future cash flow, triggering an impairment assessment of assets purchased, and assets the Company committed to purchase, to meet obligations under the agreement with the former fitness customer as of December 31, 2021. The notification

36

Table of Contents

informed the Company that it did not forecast any demand for any products or parts that were the subject of the agreement between the Company and the customer for the remainder of the agreement’s term, which ends in March 2026. Given the circumstances, GAAP required the Company to assess whether the assets were impaired. As a result of this assessment, the Company recorded an impairment on the assets purchased and loss on contracts agreed upon specifically to meet obligations under the agreement with the former fitness customer. Consequently, the Company recorded an impairment of long-lived assets and loss on contracts of $16,151 in the fourth quarter of 2021.

During the twelve months ended December 31, 2022, the Company was able to cancel $2,257 of purchase commitments for property, plant and equipment relating to the former fitness customer that had been recorded as an impairment of long-lived assets and loss on contracts at December 31, 2021, as previously described. The cancellation of purchase commitments resulted in the reversal of this amount. Additionally, the Company was able to sell property, plant and equipment resulting in a gain of $2,089 relating to the former fitness customer that had previously been recorded as an impairment of long-lived assets and written down to fair value at December 31, 2021.

Interest Expense. Interest expense was $3,380 for the twelve months ended December 31, 2022 as compared to $2,003 for the twelve months ended December 31, 2021. The change is due to higher borrowing levels and interest rates as compared to the prior year period.

Provision (Benefit) for Income Taxes. Income tax expense was $3,667 for the twelve months ended December 31, 2022 as compared to income tax benefit of $1,943 for the twelve months ended December 31, 2021. Please reference Note 7 – Income Taxes in the Consolidated Financial Statements for further details.

Due to the factors described in the preceding paragraphs, net income, comprehensive income, EBITDA, EBITDA Margin, Adjusted EBITDA and Adjusted EBITDA Margin increased during 2022.

Twelve Months Ended December 31, 2021 Compared to Twelve Months Ended December 31, 2020

Twelve Months Ended December 31, 

 

2021

2020

Increase (Decrease)

 

% of Net 

% of Net 

Amount 

    

Amount

    

Sales

    

Amount

    

Sales

    

Change

    

% Change

 

Net sales

$

454,826

100.0

%  

$

357,606

100.0

%  

$

97,220

27.2

%

Cost of sales

403,451

88.7

%  

326,105

91.2

%  

77,346

23.7

%

Manufacturing margins

51,375

11.3

%  

31,501

8.8

%  

19,874

63.1

%

Amortization of intangibles

 

10,706

 

2.4

%  

10,706

 

3.0

%  

 

0.0

%

Profit sharing, bonuses and deferred compensation

 

11,500

 

2.5

%  

8,250

 

2.3

%  

3,250

 

39.4

%

Other selling, general and administrative expenses

 

20,409

 

4.5

%  

19,043

 

5.3

%  

1,366

 

7.2

%

Impairment of long-lived assets and loss on contracts

 

16,151

 

3.6

%  

 

0.0

%  

16,151

 

N/A

Loss from operations

 

(7,391)

 

(1.6)

%  

(6,498)

 

(1.8)

%  

893

 

13.7

%

Interest expense

 

(2,003)

 

0.4

%  

(2,668)

 

0.7

%  

(665)

 

(24.9)

%

Benefit for income taxes

 

(1,943)

 

(0.4)

%  

(2,074)

 

(0.6)

%  

(131)

 

(6.3)

%

Net loss and comprehensive loss

$

(7,451)

 

(1.6)

%  

$

(7,092)

 

(2.0)

%  

$

359

 

5.1

%

EBITDA

$

24,392

 

5.4

%  

$

25,591

 

7.2

%  

$

(1,199)

 

(4.7)

%

Adjusted EBITDA

$

46,205

 

10.2

%  

$

32,847

 

9.2

%  

$

13,358

 

40.7

%

37

Table of Contents

Net Sales. Net sales were $454,826 for the twelve months ended December 31, 2021 as compared to $357,606 for the twelve months ended December 31, 2020. This change was primarily driven by the improvement in market conditions from the prior year period and commercial pricing increases implemented in the fourth quarter of 2021 to combat inflationary pressures, which were slightly offset by customer supply chain issues and the timing lag related to contractual raw material price pass-throughs to customers. The prior year period was impacted by customer facility shutdowns driven by the pandemic, along with lower market demand and related destocking activities, which were most apparent in the commercial vehicle, agricultural and construction & access equipment end markets served.

Manufacturing Margins. Manufacturing margins were $51,375 for the twelve months ended December 31, 2021 as compared to $31,501 for the twelve months ended December 31, 2020. The increase was driven by production volume increases and higher scrap income. Furthermore, the improved production volumes, the utilization of the Company’s investments in new technology and automation, and efficiencies following the closure of the Greenwood, SC facility in 2020 resulted in significant improvements in absorbed manufacturing overhead costs. This was partially offset by the timing of raw material pricing passed through to customers, inflationary pressures on wages, benefits, materials, and general manufacturing supply costs during 2021, and increased utility, freight, repair, and other costs related to the improved sales volumes. Additionally, the Company incurred $2,878 in launch costs and $700 of inventory write-offs related to the agreement with the former fitness customer during 2021. Further, the prior year period was negatively impacted by the following: market demand changes, customer shutdowns related to the COVID-19 pandemic, approximately $775 of inventory obsolescence, and health care charges specific to the estimated potential impacts of the pandemic, and $2,524 of restructuring costs related to the Greenwood facility closure.

Manufacturing margin percentages were 11.3% for the twelve months ended December 31, 2021 as compared to 8.8% for the twelve months ended December 31, 2020, an increase of 2.5%, which can be attributed to the items discussed above.

Profit Sharing, Bonuses and Deferred Compensation. Profit sharing, bonuses and deferred compensation expenses were $11,500 for the twelve months ended December 31, 2021 as compared to $8,250 for the twelve months ended December 31, 2020. The increase was primarily driven by the return of normalized discretionary 401(k) and bonus accruals as business activity and sales volumes improved.

Other Selling, General and Administrative Expenses. Other selling, general and administrative expenses were $20,409 for the twelve months ended December 31, 2021 as compared to $19,043 for the twelve months ended December 31, 2020. The increase was mainly driven by higher salary and payroll expenses which were unusually low in the prior year period due to the pandemic.

Impairment of Long-Lived Assets and Loss on Contracts. On February 18, 2022, the former fitness customer informed the Company that it did not forecast any demand for any products or parts that were the subject of the agreement between the Company and the customer for the remainder of the agreement’s term, which ends March 2026. Given the circumstances, GAAP required the Company to assess whether the assets were impaired. As a result of this assessment, the Company recorded an impairment on the assets specifically purchased to meet obligations under the agreement with the former fitness customer. As a result, the Company recorded an impairment of long-lived assets and loss on contracts of $16,151 in the fourth quarter of 2021.

Interest Expense. Interest expense was $2,003 for the twelve months ended December 31, 2021 as compared to $2,668 for the twelve months ended December 31, 2020. On average, the Company carried a lower debt balance throughout 2021 coupled with lower interest rates.

Benefit for Income Taxes. Income tax benefit was $1,943 for the twelve months ended December 31, 2021 as compared to $2,074 for the twelve months ended December 31, 2020. Please reference Note 7 – Income Taxes in the Notes to the Consolidated Financial Statements for further details.

Due to the factors described in the preceding paragraphs, net loss, comprehensive loss, EBITDA, EBITDA Margin, Adjusted EBITDA and Adjusted EBITDA Margin increased during 2021.

38

Table of Contents

Liquidity and Capital Resources

The following is a summary of our cash flows from operating, investing, and financing activities, as reflected in the Consolidated Statement of Cash Flows:

Twelve Months Ended

December 31, 

    

2022

    

2021

    

2020

Net cash provided by operating activities

$

52,426

$

14,457

$

36,523

Net cash used in investing activities

 

(50,668)

 

(33,961)

 

(5,774)

Net cash provided by (used in) financing activities

 

(1,749)

 

19,501

 

(30,629)

Net change in cash

$

9

$

(3)

$

120

Cash Flows Analysis Twelve Months Ended December 31, 2022 Compared to Twelve Months Ended December 31, 2021

Operating Activities. Cash provided by operating activities was $52,426 for the twelve months ended December 31, 2022 as compared to $14,457 for the twelve months ended December 31, 2021. The $37,969 increase in operating cash flows was primarily due to a $4,898 increase in net income (loss) adjusted for reconciling items as a result of net income in the year ended December 31, 2022 as compared to a net loss in the year ended December 31, 2021, and $33,071 in favorable working capital changes. The largest drivers positively impacting working capital were the significant increases in accounts receivable and inventories during 2021 and then stabilizing throughout 2022 as customer demand and production levels rebounded in 2021 from COVID-19 lows.

Investing Activities. Cash used in investing activities was $50,668 for the twelve months ended December 31, 2022, as compared to $33,961 for the twelve months ended December 31, 2021. The $16,707 increase in cash used in investing activities was driven by the Company’s continued investments in new technology and automation supporting new programs and existing production processes and the costs associated with the repurposing of assets at the Company’s Hazel Park, MI facility. This was partially offset by additional proceeds from the sale of property, plant and equipment originally intended to support production for the former fitness customer during the twelve months ended December 31, 2022.

Financing Activities. Cash used by financing activities was $1,749 for the twelve months ended December 31, 2022, as compared to cash provided by financing activities of $19,501 for the twelve months ended December 31, 2021. The $21,250 decrease was driven by increased borrowings, but with higher debt repayments, resulting in a slight rise in the Company’s debt balance during the current year. Additionally, the Company repurchased 559,945 shares of our common stock during 2022 under our share repurchase program at a total cost of $4,947. In 2021, the Company repurchased 147,785 shares of our common stock under our share repurchase program at a total cost of $2,153. The Company’s decision to repurchase shares in 2023 will depend on business conditions, free cash flow generation, other cash requirements and stock price. See Item 5. Market for Registrants Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities, for additional information regarding share repurchases.

Cash Flows Analysis Twelve Months Ended December 31, 2021 Compared to Twelve Months Ended December 31, 2020

Operating Activities. Cash provided by operating activities was $14,457 for the twelve months ended December 31, 2021 as compared to $36,523 for the twelve months ended December 31, 2020. The $22,066 decrease in operating cash flows was primarily due to changes in net working capital, more specifically, accounts receivable rose relative to the growth in sales, while inventories and accounts payable were elevated due to higher raw material prices and other costs as production levels rebounded from the pandemic lows. Additionally, the Company carried more inventory at the end of 2021 due to the deferment of customer orders into 2022 as they navigated supply chain issues impacting their production schedules.

Investing Activities. Cash used in investing activities was $33,961 for the twelve months ended December 31, 2021, as compared to $5,774 for the twelve months ended December 31, 2020. The $28,187 increase in cash used in investing activities was driven by the Company’s continued investment in technology and automation in 2021 as compared to leveraging our investments in new technology and automation and preserving cash during the prior year period. Additionally, the Company invested $19,658 into the Hazel Park, MI facility during 2021. The Company also recorded $5,348 in proceeds from the sale of property, plant and equipment mainly driven by the sale of the Greenwood, SC facility during 2021.

39

Table of Contents

Financing Activities. Cash provided by financing activities was $19,501 for the twelve months ended December 31, 2021, as compared to cash used in financing activities of $30,629 for the twelve months ended December 31, 2020. The $50,130 change was driven by higher borrowings in excess of debt repayments in the second half of 2021 compared to debt repayments in excess of borrowings during the prior year. The Company repurchased 147,785 shares of our common stock in 2021 under our share repurchase program at a total cost of $2,153. In 2020, the Company repurchased 320,245 shares of our common stock under our share repurchase program at a total cost of $2,435.

Amended and Restated Credit Agreement

On September 26, 2019, and as last amended as of March 31, 2022, we entered into the Credit Agreement with certain lenders and Wells Fargo Bank, National Association, as administrative agent (the Agent). The Credit Agreement provides for a $200,000 Revolving Loan, with a letter of credit sub-facility in an aggregate amount not to exceed $5,000, and a swingline facility in an aggregate amount of $20,000. The Credit Agreement also provides for an additional $100,000 of capacity through an accordion feature. All amounts borrowed under the Credit Agreement mature on September 26, 2024.

Our obligations under the Credit Agreement are secured by first priority security interests in substantially all of our personal property and guaranteed by, and secured by first priority security interests in, substantially all of the personal property of, our direct and indirect subsidiaries: Center Manufacturing, Inc., Center Manufacturing Holdings, Inc., Center—Moeller Products LLC, Defiance Metal Products Co., Defiance Metal Products of Arkansas, Inc., Defiance Metal Products of PA., Inc. and Defiance Metal Products of WI, Inc.

Borrowings under the Credit Agreement bear interest at a fluctuating London Interbank Offered Rate (LIBOR) (which may be adjusted for certain reserve requirements), plus 1.00 to 2.00% depending on the current Consolidated Total Leverage Ratio (as defined in the Credit Agreement). Under certain circumstances, we may not be able to pay interest based on LIBOR. If that happens, we will be required to pay interest at the Base Rate, which is the sum of (a) the higher of (i) the Prime Rate (as publicly announced by the Agent from time to time) and (ii) the Federal Funds Rate plus 0.50%, plus (b) 0.00% to 1.00%, depending on the current Total Consolidated Leverage Ratio. The Credit Agreement also includes provisions for determining a replacement rate when LIBOR is no longer available.

At December 31, 2022, the interest rate on outstanding borrowings under the Revolving Loan was 5.69%. At December 31, 2022, we had availability of $127,764 under the Revolving Loan.

We must pay a commitment fee rate ranging from 0.20% to 0.50% per annum on the average daily unused portion of the aggregate unused revolving commitments under the Credit Agreement. We must also pay fees as specified in the Fee Letter (as defined in the Credit Agreement) and with respect to any letters of credit issued under the Credit Agreement.

The Credit Agreement contains usual and customary negative covenants for agreements of this type, including, but not limited to, restrictions on our ability to, subject to certain exceptions, create, incur or assume indebtedness, create or incur liens, make certain investments, merge or consolidate with another entity, make certain asset dispositions, pay dividends or other distributions to shareholders, enter into transactions with affiliates, enter into sale leaseback transactions or make capital expenditures. The Credit Agreement also requires us to satisfy certain financial covenants, including a minimum interest coverage ratio of 3.00 to 1.00. At December 31, 2022, our interest coverage ratio was 13.14 to 1.00. The Credit Agreement also requires us to maintain a consolidated total leverage ratio not to exceed 3.25 to 1.00, although such leverage ratio can be increased in connection with certain acquisitions. As of December 31, 2022, our consolidated total leverage ratio was 1.26 to 1.00.

The Credit Agreement includes customary events of default, including, among other things, payment default, covenant default, breach of representation or warranty, bankruptcy, cross-default, material ERISA events, material money judgments and failure to maintain subsidiary guarantees. If an event of default occurs, the Agent will be entitled to take various actions, including the acceleration of amounts due under the Credit Agreement, termination of the credit facility and all other actions permitted to be taken by a secured creditor.

On June 30, 2020, March 31, 2021 and March 31, 2022, the Company entered into amendments to the Credit Agreement. Please refer to Note 3 – Bank Revolving Credit Notes in the Notes to the Consolidated Financial Statements for a more detailed discussion.

40

Table of Contents

Capital Requirements and Sources of Liquidity

During the twelve months ended December 31, 2022 and 2021, our capital expenditures were $58,610 and $39,309, respectively. The increase of $19,301 was driven by our continued investments in new technology and automation in addition to the repurposing of assets in the Company’s Hazel Park, MI facility. Capital expenditures for the full year 2023 are expected to be between $20,000 and $25,000.

We have historically relied upon cash available through credit facilities, in addition to cash from operations, to finance our working capital requirements and to support our growth. At December 31, 2022, we had immediate availability of $127,764 through our Revolving Loan and another $100,000 through an accordion feature under our Credit Agreement, subject to covenants under the Credit Agreement. We regularly monitor potential capital sources, including equity and debt financings, in an effort to meet our planned capital expenditures and liquidity requirements. Our future success will be highly dependent on our ability to access outside sources of capital. We will continue to have access to the availability currently provided under the Credit Agreement as long as we remain compliant with the financial covenants. Based on our estimates at this time, we expect to be in compliance with these financial covenants through 2023 and the foreseeable future.

We believe that our operating cash flow and available borrowings under the Credit Agreement are sufficient to fund our operations for 2023 and beyond. However, future cash flows are subject to a number of variables, and additional capital expenditures will be required to conduct our operations. There can be no assurance that operations and other capital resources will provide cash in sufficient amounts to maintain planned or future levels of capital expenditures. In the event we make one or more acquisitions and the amount of capital required is greater than the amount we have available for acquisitions at that time, we could be required to reduce the expected level of capital expenditures and/or seek additional capital. If we seek additional capital, we may do so through borrowings under the Credit Agreement, joint ventures, asset sales, offerings of debt or equity securities or other means. We cannot guarantee that this additional capital will be available on acceptable terms or at all. If we are unable to obtain the funds we need, we may not be able to complete acquisitions that may be favorable to us or finance the capital expenditures necessary to conduct our operations.

Contractual Obligations

The following table presents our obligations and commitments to make future payments under contracts and contingent commitments at December 31, 2022:

Payments Due by Period

    

Total

    

2023

    

2024 – 2025

    

2026 – 2027

    

Thereafter

Long-term debt principal payment obligations (1)

$

72,236

$

$

72,236

$

$

Equipment financing agreements (2)

1,470

1,164

306

Forecasted interest on debt payment obligations (3)

7,800

4,475

3,325

Finance lease obligations (4)

 

1,242

 

426

 

717

 

99

 

Operating lease obligations (4)

 

40,668

 

5,709

 

10,490

 

9,329

 

15,140

Total

$

123,416

$

11,774

$

87,074

$

9,428

$

15,140

(1)Principal payments under the Company’s Credit Agreement, which expires in 2024.
(2)Financing agreements entered into to purchase manufacturing equipment. Current and long-term portions are classified in other current liabilities and other long-term liabilities, respectively, on the Consolidated Balance Sheets.
(3)Forecasted interest on debt obligations are based on the debt balance, interest rate, and unused fee of the Company’s revolver credit facility, and the debt balances and interest rates of the Company’s equipment finance agreements as of December 31, 2022.
(4)See Note 4 – Leases in the Notes to the Consolidated Financial Statements for additional information.

Capital expenditures for the full year 2023 are expected to be below 2022 levels as the Company is nearing the end of an unusually high capital expenditure cycle.

41

Table of Contents

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

We are exposed to market risk from changes in customer forecasts, interest rates, and, to a lesser extent, commodities. To reduce such risks, we selectively use financial instruments and other proactive management techniques.

Customer Forecasts

The use and consumption of our components, products and services fluctuates depending on order forecasts we receive from our customers. These order forecasts can change dramatically from quarter-to-quarter dependent upon the respective markets that our customers provide products in.

Interest Rate Risk

We are exposed to interest rate risk on certain of our short- and long-term debt obligations used to finance our operations and acquisitions. We have LIBOR-based floating rate borrowings under the Credit Agreement, which exposes us to variability in interest payments due to changes in the referenced interest rates.

The amount borrowed under the Revolver Loan under the Credit Agreement was $72.2 million as of December 31, 2022. The interest rate was 5.69% as of December 31, 2022. Please see “Liquidity and Capital Resources – Amended and Restated Credit Agreement” in Part II, Item 7 of this Annual Report on Form 10-K and Note 3 – Bank Revolving Credit Notes in the Notes to the Consolidated Financial Statements for more specifics.

A hypothetical 100-basis-point increase in our borrowing rates would have resulted in an additional $0.7 million of interest expense based on our variable rate debt at December 31, 2022. We do not use derivative financial instruments to manage interest risk or to speculate on future changes in interest rates. A rise in interest rates could negatively affect our cash flow.

Commodity Risk

We source a wide variety of materials and components from a network of suppliers. While such materials are generally available from numerous suppliers, the COVID-19 pandemic resulted in availability delays at times. In addition, commodity raw materials, such as steel, aluminum, copper, paint and paint chemicals, and other production costs are subject to price fluctuations, which could have a negative impact on our results. We strive to pass along such commodity price increases to customers to avoid profit margin erosion and in many cases utilize contracts with those customers to mitigate the impact of commodity raw material price fluctuations. As of December 31, 2022, we did not have any commodity hedging instruments in place.

42

Table of Contents

Item 8. Financial Statements and Supplementary Data.

Report of Independent Registered Public Accounting Firm

To the shareholders and the Board of Directors of Mayville Engineering Company, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Mayville Engineering Company, Inc. and subsidiaries (the “Company”) as of December 31, 2022 and 2021, the related consolidated statements of comprehensive income (loss), shareholders’ equity, and cash flows, for the twelve months ended December 31, 2022, 2021, and 2020, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2022 and 2021 and the results of its operations and its cash flows for the twelve months ended December 31, 2022, 2021, and 2020, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ DELOITTE & TOUCHE LLP

Milwaukee, WI

March 1, 2023

We have served as the Company’s auditor since 2018.

43

Table of Contents

Mayville Engineering Company, Inc. and Subsidiaries

Consolidated Balance Sheets

(in thousands, except share amounts)

    

December 31, 

    

December 31, 

2022

2021

ASSETS

  

  

Cash and cash equivalents

$

127

$

118

Receivables, net of allowances for doubtful accounts of $545 at December 31, 2022
and $631 at December 31, 2021

 

58,001

 

55,417

Inventories, net

 

71,708

 

70,157

Tooling in progress

 

7,938

 

3,950

Prepaid expenses and other current assets

 

3,529

 

2,924

Total current assets

 

141,303

 

132,566

Property, plant and equipment, net

 

145,771

 

120,746

Assets held for sale

83

Goodwill

 

71,535

 

71,535

Intangible assets, net

 

43,809

 

50,761

Operating lease assets

36,073

Other long-term assets

 

2,007

 

3,865

Total assets

$

440,581

$

379,473

LIABILITIES AND SHAREHOLDERS’ EQUITY

 

  

 

Accounts payable

$

53,735

$

50,119

Current portion of operating lease obligation

4,857

Accrued liabilities:

 

 

Salaries, wages, and payroll taxes

 

7,288

 

8,684

Profit sharing and bonus

 

6,860

 

5,289

Current portion of deferred compensation

18,062

Other current liabilities

 

11,646

 

13,280

Total current liabilities

 

102,448

 

77,372

Bank revolving credit notes

 

72,236

 

67,610

Operating lease obligation, less current maturities

31,891

Deferred compensation, less current portion

 

3,132

 

25,117

Deferred income tax liability

 

11,818

 

8,641

Other long-term liabilities

 

1,189

 

2,462

Total liabilities

$

222,714

$

181,202

Commitments and contingencies (see Note 8)

 

  

 

Common shares, no par value, 75,000,000 authorized, 21,645,193 shares issued at
December 31, 2022 and 21,386,382 at December 31, 2021

 

 

Additional paid-in-capital

 

200,945

 

197,186

Retained earnings

 

26,274

 

7,547

Treasury shares at cost, 1,472,447 shares at December 31, 2022 and 1,050,448 at
December 31, 2021

 

(9,352)

 

(6,462)

Total shareholders’ equity

 

217,867

 

198,271

Total

$

440,581

$

379,473

The accompanying notes are an integral part of these Consolidated Financial Statements.

44

Table of Contents

Mayville Engineering Company, Inc. and Subsidiaries

Consolidated Statements of Comprehensive Income (Loss)

(in thousands, except share amounts and per share data)

Twelve Months Ended 

December 31, 

    

2022

    

2021

    

2020

Net sales

$

539,392

$

454,826

$

357,606

Cost of sales

 

478,323

 

403,451

 

326,105

Amortization of intangible assets

 

6,952

 

10,706

 

10,706

Profit sharing, bonuses, and deferred compensation

 

7,997

 

11,500

 

8,250

Other selling, general and administrative expenses

 

24,692

 

20,409

19,043

Impairment of long-lived assets and (gain) loss on contracts

(4,346)

16,151

 

Income (loss) from operations

 

25,774

 

(7,391)

 

(6,498)

Interest expense

 

(3,380)

 

(2,003)

 

(2,668)

Income (loss) before taxes

 

22,394

 

(9,394)

 

(9,166)

Income tax expense (benefit)

3,667

 

(1,943)

 

(2,074)

Net income (loss) and comprehensive income (loss)

$

18,727

$

(7,451)

$

(7,092)

Earnings (loss) per share:

  

 

  

 

  

Basic

$

0.92

$

(0.37)

$

(0.36)

Diluted

$

0.91

$

(0.36)

$

(0.36)

Weighted average shares outstanding:

  

 

  

 

  

Basic

20,399,737

 

20,404,543

 

19,898,122

Diluted

 

20,682,628

 

20,830,977

 

19,898,122

The accompanying notes are an integral part of these Consolidated Financial Statements.

45

Table of Contents

Mayville Engineering Company, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(in thousands)

Twelve Months Ended 

December 31, 

    

2022

    

2021

    

2020

CASH FLOWS FROM OPERATING ACTIVITIES

Net income (loss)

$

18,727

$

(7,451)

$

(7,092)

Adjustments to reconcile net income (loss) to net cash provided
by operating activities:

 

Depreciation

 

22,359

21,077

21,383

Amortization

 

6,952

10,706

10,706

Allowance for doubtful accounts

 

(86)

(667)

772

Inventory excess and obsolescence reserve

 

80

(935)

80

Stock-based compensation expense

 

3,759

4,962

4,732

(Gain) loss on disposal of property, plant and equipment

 

(161)

(1,311)

667

Impairment of inventory and loss on contracts

 

700

Impairment of long-lived assets and (gain) loss on contracts

 

(4,346)

16,151

Deferred compensation

 

(3,923)

(514)

682

Non-cash lease expense

4,251

Other non-cash adjustments

 

329

325

358

Changes in operating assets and liabilities – net of effects of acquisition:

 

Accounts receivable

 

(2,498)

(12,670)

(2,664)

Inventories

 

(1,631)

(27,896)

4,246

Tooling in progress

 

(3,988)

(824)

(1,537)

Prepaids and other current assets

 

(616)

(1,013)

500

Accounts payable

 

9,361

11,836

515

Deferred income taxes

 

4,710

(3,323)

(4,857)

Operating lease obligations

(3,856)

Accrued liabilities

 

3,003

5,304

8,032

Net cash provided by operating activities

 

52,426

 

14,457

 

36,523

CASH FLOWS FROM INVESTING ACTIVITIES

 

  

 

  

 

  

Purchase of property, plant and equipment

 

(58,610)

(39,309)

(7,794)

Proceeds from sale of property, plant and equipment

 

7,942

5,348

2,020

Net cash used in investing activities

 

(50,668)

 

(33,961)

 

(5,774)

CASH FLOWS FROM FINANCING ACTIVITIES

 

 

  

 

  

Proceeds from bank revolving credit notes

 

437,939

385,226

267,169

Payments on bank revolving credit notes

 

(433,312)

(362,873)

(294,484)

Repayments of other long-term debt

 

(1,107)

(268)

Deferred financing costs

 

(207)

Purchase of treasury stock

 

(4,947)

(2,153)

(2,509)

Payments on finance leases

 

(322)

(544)

(598)

Proceeds from the exercise of stock options

 

139

Other financing activities

 

(26)

Net cash provided by (used in) financing activities

 

(1,749)

 

19,501

 

(30,629)

Net increase (decrease) in cash and cash equivalents

 

9

 

(3)

 

120

Cash and cash equivalents at beginning of period

 

118

 

121

 

1

Cash and cash equivalents at end of period

$

127

$

118

$

121

Supplemental disclosure of cash flow information:

 

  

 

  

 

  

Cash paid for interest

$

3,670

$

2,122

$

3,011

Cash paid for taxes

$

704

$

1,548

$

744

Non-cash construction in progress in accounts payable

$

603

$

6,347

$

1,559

The accompanying notes are an integral part of these Consolidated Financial Statements.

46

Table of Contents

Mayville Engineering Company, Inc. and Subsidiaries

Consolidated Statement of Shareholders’ Equity

(in thousands)

Shareholder’s Equity

Additional 

Treasury 

Retained 

    

Paid-in-Capital

    

Shares

    

Earnings

    

Total

Balance as of December 31, 2019

$

183,687

$

(4,882)

$

22,089

$

200,895

Net loss

 

 

 

(7,092)

 

(7,092)

Share repurchases

 

 

(2,509)

 

 

(2,509)

ESOP contribution

 

2,374

 

2,457

 

 

4,831

Stock-based compensation

 

4,732

 

 

 

4,732

Balance as of December 31, 2020

$

190,793

$

(4,934)

$

14,998

$

200,857

Net loss

 

 

 

(7,451)

 

(7,451)

Share repurchases

 

 

(2,153)

 

 

(2,153)

401(k) contribution

 

1,319

 

625

 

 

1,944

Stock options exercised

 

112

 

 

 

112

Stock-based compensation

 

4,962

 

 

 

4,962

Balance as of December 31, 2021

$

197,186

$

(6,462)

$

7,547

$

198,271

Net income

18,727

18,727

Share repurchases

(4,947)

(4,947)

401(k) contribution

2,057

2,057

Stock-based compensation

3,759

3,759

Balance as of December 31, 2022

$

200,945

$

(9,352)

$

26,274

$

217,867

The accompanying notes are an integral part of these Consolidated Financial Statements.

47

Table of Contents

Mayville Engineering Company, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

(in thousands, except share amounts and per share data)

Note 1. Nature of business and summary of significant accounting policies

Mayville Engineering Company, Inc. and subsidiaries (MEC, the Company, we, our, us or similar terms) is a leading U.S.-based value-added manufacturing partner that provides a full suite of services from concept to production, including prototyping and tooling, production fabrication, coating, assembly and aftermarket components. Our customers operate in diverse end markets, including heavy- and medium-duty commercial vehicle, construction & access equipment, powersports, agriculture, military and other end markets. Founded in 1945 and headquartered in Mayville, Wisconsin, we are a leading Tier I U.S. supplier of highly engineered components to original equipment manufacturer (OEM) customers with leading positions in their respective markets. The Company operates 20 facilities located in Arkansas, Michigan, Mississippi, Ohio, Pennsylvania, Virginia and Wisconsin. Our engineering expertise and technical know-how allow us to add value through every product redevelopment cycle (generally every three to five years for our customers).

In December 1985, the Company formed the Mayville Engineering Company, Inc. Employee Stock Ownership Plan (ESOP). The ESOP is a tax qualified retirement plan and is designed to invest primarily in the Company’s common stock which is held in a trust. From January 2003 until the Company’s initial public offering of common stock (IPO) in May 2019, the ESOP owned 100% of the Company’s outstanding shares of common stock which have been fully allocated to active or retired eligible employees. In connection with the IPO, the Company initially sold 6,250,000 shares of common stock into the public market, reducing ESOP ownership to approximately 67%. As of December 31, 2022, approximately 45% of all outstanding shares were held by the ESOP or within the Company’s 401(k) plan.

Basis of presentation and consolidation

The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (GAAP). They include the accounts of the Company and its wholly-owned subsidiaries. All intercompany balances and transactions have been eliminated in consolidation.

Use of estimates

The preparation of consolidated financial statements in conformity with GAAP requires management to make certain estimates and assumptions that affect the reported amounts and disclosures. Accordingly, actual results could differ from those estimates.

Cash and cash equivalents

The Company considers all highly-liquid investments purchased with original maturities of 90 days or less to be cash and cash equivalents.

Concentration of credit risk

Financial instruments that potentially subject the Company to credit risk consist principally of bank balances above the Federal Deposit Insurance Corporation insurability limits of $250 per official custodian. The Company has not experienced any losses on these accounts and management believes the Company is not exposed to any significant credit risk on cash.

48

Table of Contents

Accounts receivable

Accounts receivable are generally uncollateralized customer obligations due under normal trade terms requiring payment within 30 to 60 days from the invoice date. Management periodically reviews past due balances and established an allowance for doubtful accounts of $545 and $631 as of December 31, 2022 and 2021, respectively, for probable uncollectible amounts based on its assessment of the current status of individual accounts. The estimated valuation allowance results in a charge to cost of sales and the accounts are written-off through a charge to the valuation allowance and a credit to accounts receivable after the Company has used all reasonable collection efforts.

As the Company's customer base is principally made up of blue-chip OEMs with high credit ratings and our trade receivables are due within one year or less, the Company does not have a reserve for credit losses.

Inventories

Inventories are stated at the lower of cost, determined on the first-in, first-out method (FIFO), and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. Work-in-process and finished goods are valued at production cost consisting of material, labor and overhead. The Company maintains a reserve for obsolete and slow-moving inventory of $2,344 and $2,265 as of December 31, 2022 and 2021, respectively, which is based upon the aging of current inventory as well as assumptions on future demand and market conditions.

Tooling in progress

The Company has agreements with its customers to provide production tooling which will be used to produce specific parts for its customers. The costs to design, engineer, and manufacture the tooling are charged to tooling in progress as incurred and based on when control of the tooling is transferred to the customer under contract or when the customer signs off through the Product Part Approval Process (PPAP) or other documented customer acceptance, either at a point in time or over a period of time is when revenue is recognized. The Company may also provide production tooling that is not sold to customers but is capitalized in property, plant and equipment. To the extent that estimated costs exceed expected reimbursement from the customer, the Company recognizes a loss. Tooling in progress was $7,938 and $3,950 as of December 31, 2022 and 2021, respectively.

Property, plant and equipment

Property, plant and equipment are stated at cost. Expenditures for additions and improvements are capitalized while replacements, maintenance and repairs which do not improve or extend the lives of the respective assets are expensed as incurred. Properties sold, or otherwise disposed of, are removed from the property accounts, with gains or losses on disposal credited or charged to the results of operations. Depreciation is provided over the estimated useful lives of the respective assets, using the straight-line depreciation method for financial reporting purposes and begins when the asset is placed into service. Depreciation expense for the twelve months ended December 31, 2022, 2021 and 2020 was $22,359, $21,077 and $21,383, respectively.

Business combinations

The Company accounts for all business combinations in accordance with Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) Topic 805, Business Combinations. In connection with a business combination, the acquiring company must allocate the cost of the acquisition to assets acquired and liabilities assumed based on fair values as of the acquisition date. Any excess or shortage of amounts assigned to assets and liabilities over or under the purchase price is recorded as a gain on bargain purchase or goodwill. Transaction costs associated with acquisitions are expensed as incurred within selling, general and administrative expenses.

49

Table of Contents

Goodwill

We test goodwill for impairment annually, or more frequently if triggering events occur indicating that there may be an impairment. We have recorded goodwill and perform testing for potential goodwill impairment at a reporting unit level. A reporting unit is an operating segment, or a business unit one level below an operating segment for which discrete financial information is available, and for which management regularly reviews the operating results. Additionally, components within an operating segment can be aggregated as a single reporting unit if they have similar economic characteristics. We have concluded we have one reporting unit.

We determine the fair value of our reporting units using an income approach. Under the income approach, we calculate the fair value of a reporting unit based on the present value of estimated future cash flows. The income approach is dependent on several key management assumptions, including estimates of future sales, gross margins, operating costs, interest expense, income tax rates, capital expenditures, changes in working capital requirements and the weighted average cost of capital or the discount rate. Discount rate assumptions include an assessment of the risk inherent in the future cash flows of the reporting unit. Expected cash flows used under the income approach are developed in conjunction with our budgeting and forecasting process.

We test our goodwill for impairment on an annual basis in the fourth quarter of each fiscal year, and more frequently if events or changes in circumstances indicate that it might be impaired. At December 31, 2022 and 2021, the Company had goodwill with a carrying amount of $71,535 with the fair value of our reporting unit exceeding the carrying value.

If the market valuation of our common shares or operating results of our reporting unit significantly decline beyond current levels, we may again need to conduct an evaluation of the fair value of our goodwill, which may result in an impairment change.

Changes to management assumptions and estimates utilized in the income approach could negatively impact the fair value conclusions for our reporting units resulting in goodwill impairment. All key assumptions and valuations are determined by and are the responsibility of management. The factors used in the impairment analysis are inherently subject to uncertainty. We believe that the estimates and assumptions are reasonable to determine the fair value of our reporting unit, however, if actual results are not consistent with these estimates and assumptions, goodwill and other intangible assets may be overstated which could result in an impairment charge.

Fair value of financial instruments

Financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable and long-term debt. The carrying amount of all significant financial instruments approximates fair value due to either the short maturity or the existence of variable interest rates that approximate prevailing market rates. Cash and cash equivalents, accounts receivable and accounts payable are classified as Level 1 fair value inputs as further described in Note 12 – Fair Value of Financial Instruments. Long-term debt is classified as a Level 2 fair value input.

Impairment of long-lived assets and (gain) loss on contracts

When events or conditions warrant, the Company evaluates the recoverability of long-lived assets and considers whether these assets are impaired. The Company assesses the recoverability of these assets based on several factors, including management’s intention with respect to these assets and their projected undiscounted cash flows. If projected undiscounted cash flows are less than the carrying amount of the respective assets, the Company adjusts the carrying amounts of such assets to their estimated fair value. To the extent that the carrying value of the net assets of an asset group is greater than the estimated fair value, the Company may be required to record impairment charges. The Company records intangible asset impairment charges as a reduction to intangible assets. The Company records other long-lived asset impairment charges as a reduction to property, plant and equipment and an increase in other current liabilities for loss contracts in the Consolidated Balance Sheets. The Company records a gain on sale of a previously impaired asset and a reversal of a loss contract within impairment of long-lived assets and (gain) loss on contracts.

Deferred financing costs

Loan issuance costs and discounts are capitalized upon the issuance of long-term debt and amortized over the life of the related debt. Loan issuance costs associated with revolving debt arrangements are presented as a component of other assets. Loan issuance

50

Table of Contents

costs incurred in connection with revolving debt arrangements are amortized using the straight-line method over the life of the credit agreement. Loan issuance costs and discounts incurred in connection with term debt are amortized using the effective interest method. Amortization of deferred loan issuance costs and discounts are included in interest expense. During 2022, 2021 and 2020, the Company recorded $0, $0 and $207, respectively of deferred financing costs associated with its long-term debt and line of credit arrangements. Amortization expense associated with the deferred debt issuance costs and discounts in 2022, 2021 and 2020 was $336, $336 and $358. Accumulated amortization was $1,056, $720 and $616 as of December 31, 2022, 2021 and 2020, respectively. Amendments made to existing debt in 2022, 2021 and 2020 resulted in the write-off of $0 of unamortized costs associated with the debt that was replaced.

Revenue recognition

The Company recognizes revenue for the transfer of goods or services to a customer in an amount that reflects the consideration it expects to receive in exchange for those goods or services. The Company enters into supply agreements and purchase orders that include both free on board (FOB) origin and FOB destination shipping terms. Depending on the terms of the agreement, the customer takes ownership at shipment or at delivery, and this is when control transfers. Sales are supported by documentation such as supply agreements and purchase orders, which specify certain terms and conditions including product specifications, quantities, fixed prices, delivery dates and payments terms. Revenue related to services is recognized in the period services are performed, thus the Company recognizes revenue at a point in time.

There are many customers where the Company designs, engineers and builds production tooling, which is purchased by the customer. Most of the tooling revenue is complete at the point the customer signs off on the product through the PPAP or other documented customer acceptance. Revenue is recognized when control of the tooling promised under a contract is transferred to the customer either at a point in time or over a period of time in an amount that reflects the consideration to which the Company expects to be entitled in exchange for the goods or services.

The Company offers certain customers discounts for early payments. These discounts are recorded against net sales in the consolidated statement of comprehensive income (loss) and accounts receivable in the Consolidated Balance Sheets. The Company does not offer any other customer incentives, rebates or allowances.

Shipping and handling

The Company expenses shipping and handling costs as incurred. These costs are generally comprised of salaries and wages, shipping supplies and warehouse costs. Inbound freight costs, which mostly relate to raw materials, are included in cost of sales on the Consolidated Statements of Comprehensive Income (Loss). Outbound freight costs, which mostly relate to sales, are included in net sales on the Consolidated Statements of Comprehensive Income (Loss). The Company does not charge customers nor recognize revenue for shipping and handling. The Company’s OEM customers arrange and pay the freight for delivery.

Advertising

The Company expenses the costs of advertising when incurred. Advertising expense was $169, $163 and $100 for the twelve months ended December 31, 2022, 2021 and 2020, respectively. Advertising costs are charged to selling, general and administrative expenses.

51

Table of Contents

Income taxes

Income taxes and uncertain tax positions are accounted for in accordance with ASC 740, Accounting for Income Taxes. Deferred income taxes are provided for the differences between the bases of assets and liabilities for financial reporting and income tax purposes. The Company measures deferred tax assets and liabilities using enacted tax rates in effect for the years in which the differences are expected to reverse and recognizes the effect of a change in enacted rates in the period of enactment. Tax positions meeting the more-likely-than-not recognition threshold are measured pursuant to the guidance set forth in ASC 740. A valuation allowance is established when necessary to reduce deferred tax assets to the amount expected to be realized. See Note 7 – Income Taxes of these Notes to Consolidated Financial Statements for further discussion.

Income (loss) per share

The Company computes basic income (loss) per share by dividing net income (loss) available to shareholders by the actual weighted average number of common shares outstanding for the reporting period. The dilutive impact to basic earnings per share considers the impact to earnings if all convertible securities were exercised or outstanding that do not have an antidilutive impact on earnings per share.

Treasury stock

Treasury stock purchases are accounted for under the cost method whereby the entire cost of the acquired stock is recorded as treasury stock. Subsequent reissuance of shares to the 401(k) Plan or ESOP are recorded as a reduction to treasury stock and as ESOP expense in the Consolidated Statements of Comprehensive Income (Loss).

Recent accounting pronouncements

In June 2016, the FASB issued Accounting Standards Update (ASU) No. 2016-13, Measurement of Credit Losses on Financial Instruments, which establishes ASC 326, Financial Instruments – Credit Losses. The ASU revises the measurement of credit losses for financial assets measured at amortized cost from an incurred loss methodology to an expected loss methodology. The ASU affects trade receivables, debt securities, net investment in leases, and most other financial assets that represent a right to receive cash. For as long as the Company remains an emerging growth company (EGC), the new guidance is effective for annual reporting periods beginning after December 15, 2022. The Company adopted the new standard as of January 1, 2023. As our customer base is principally made of blue-chip OEMs with high credit ratings and our trade receivables are due within one year or less, the adoption of this standard did not have a material impact on our consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02, Leases, creating Topic 842. Under the new guidance, lessees are required to recognize a right-of-use (ROU) asset and a lease liability for substantially all leases. When measuring ROU assets and lease liabilities, a lessee should include amounts related to option terms, such as the option of extending or terminating the lease or purchasing the underlying asset, that are reasonably certain to be exercised. The new guidance will continue to classify leases as either finance or operating, with classification affecting the pattern of expense recognition. For finance leases, a lessee will recognize the interest on a lease liability separate from amortization of the ROU asset. In addition, repayments of principal will be presented within financing activities, and interest payments will be presented within operating activities in the statement of cash flows. For operating leases, a lessee will recognize a single lease cost on a straight-line basis and classify all cash payments within operating activities in the statement of cash flows. Entities have the option to adopt the new guidance through a cumulative effect adjustment to retained earnings applied either to the beginning of the earliest period presented (modified retrospective approach) or to the beginning of the period of adoption (effective date approach) whereby the comparative periods are unchanged. For public companies, this guidance was effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. For as long as the Company remained an EGC, the new guidance was effective for annual reporting periods beginning after December 15, 2022, and interim periods within fiscal years beginning after December 15, 2022. Early adoption was permitted. The Company adopted the annual reporting guidance as of January 1, 2022 using the effective date approach. The Company early adopted the interim reporting guidance during the period ended March 31, 2022.

The new guidance provides a number of optional practical expedients in transition. The Company elected the “package of practical expedients”, which allows it to not reassess under the new guidance its prior conclusions about lease identification, lease classification and initial direct costs. The Company did not elect the use-of-hindsight practical expedient. In addition, the new

52

Table of Contents

guidance provides accounting policy elections for an entity’s ongoing lessee accounting. The Company has elected to not separate lease and non-lease components for certain of its real estate leases. The Company has elected the short-term lease recognition exemption for all leases that qualify which means that it will not recognize ROU assets or lease liabilities for those leases with a term of 12 months or less.

In December 2019, the FASB issued ASU 2019-12, Income Taxes, creating Topic 740, which removes certain exceptions for recognizing deferred taxes for investments, performing intra-period allocation and calculating income taxes in interim periods. The ASU also adds guidance to reduce complexity in certain areas, including recognizing deferred taxes for tax goodwill and allocating taxes to members of a consolidated group. For public companies, this guidance will be effective for fiscal years beginning after December 15, 2020. For as long as the Company remains an EGC, the new guidance is effective for annual reporting periods beginning after December 15, 2021, and interim periods within fiscal years beginning after December 15, 2022. During the period ended March 31, 2021, the Company adopted this guidance. This adoption had no impact on the consolidated financial statements.

Note 2. Select balance sheet data

Inventory

Inventories as of December 31, 2022 and December 31, 2021 consist of:

December 31, 

December 31, 

    

2022

    

2021

Finished goods and purchased parts

$

44,728

$

41,041

Raw materials

 

17,003

 

18,905

Work-in-process

 

9,977

 

10,211

Total

$

71,708

$

70,157

At December 31, 2021, there was uncertainty as to the level of demand from the former fitness customer. The Company received a notification from this customer in February 2022 resulting in a change in forecasted future cash flow, triggering an impairment assessment of assets purchased, and assets the Company had committed to purchase, to meet obligations under the agreement with the former fitness customer as of December 31, 2021. As a result, at December 31, 2021 the Company recorded an inventory impairment of $700, of which $661 was due to loss contracts recorded in other current liabilities and a $39 decrease to inventories. As of December 31, 2022, there was a balance of $77 of loss contract liabilities recorded in other current liabilities on the Consolidated Balance Sheets.

Property, plant and equipment

Property, plant and equipment as of December 31, 2022 and December 31, 2021 consist of:

    

Useful Lives

    

December 31, 

    

December 31, 

 Years

2022

2021

Land

Indefinite

$

1,030

$

1,033

Land improvements

15-39

3,169

3,169

Building and building improvements

 

15-39

 

59,664

 

56,243

Machinery, equipment and tooling

 

3-10

 

250,110

 

222,202

Vehicles

 

5

 

4,359

 

3,943

Office furniture and fixtures

 

3-7

 

19,585

 

17,960

Construction in progress

 

N/A

 

26,435

 

15,443

Total property, plant and equipment, gross

 

364,352

 

319,993

Less accumulated depreciation

 

218,581

 

199,247

Total property, plant and equipment, net

$

145,771

$

120,746

At December 31, 2021, there was uncertainty as to the level of demand from the former fitness customer. The Company received a notification from the former fitness customer in February 2022 resulting in a change in forecasted future cash flow, triggering an impairment assessment of assets purchased, and assets the Company had committed to purchase, to meet obligations

53

Table of Contents

under the agreement with the former fitness customer as of December 31, 2021. As a result, at December 31, 2021, the Company recorded a long-lived asset impairment of $12,875, and an increase in other current liabilities of $3,276 due to non-cancellable commitments to purchase property, plant and equipment related to loss contracts.

During the twelve months ended December 31, 2022, the Company was able to cancel $2,257 of purchase commitments for property, plant and equipment relating to the former fitness customer that had previously been recorded in the Consolidated Statements of Comprehensive Income (Loss) as an impairment of long-lived assets and loss on contracts as of December 31, 2021. The cancellation of loss contracts has resulted in the reversal of these amounts from other current liabilities in the Consolidated Balance Sheets and recorded in the Consolidated Statements of Comprehensive Income (Loss) as an impairment of long-lived assets and gain on contracts.

Throughout the twelve months ended December 31, 2022, the Company sold $5,097 of machinery and equipment originally intended to support production for the former fitness customer, resulting in a gain on the sale of the assets of $2,089. The gain on the sale of assets is classified in impairment of long-lived assets and gain on contracts on the Consolidated Statements of Comprehensive Income (Loss) as of December 31, 2022. As a result of the previously mentioned impairment, these assets had been written down to fair value at December 31, 2021.

The Company completed the closure of its Greenwood, SC manufacturing facility during the third quarter of 2020 and sold the facility during the third quarter of 2021 for $5,300 before commissions and fees, resulting in a gain on the sale of the asset of $1,374, which is classified in cost of sales on the Consolidated Statements of Comprehensive Income (Loss) as of December 31, 2021.

As of December 31, 2022, $83 of property, plant and equipment has been reclassified within the Consolidated Balance Sheets as assets held for sale.

The Company adopted ASC 842 on January 1, 2022, classifying finance leases of $1,103 in property, plant and equipment on the Consolidated Balance Sheets as of December 31, 2022. Please refer to Note 4 – Leases for additional information. Due to the adoption, the Company reclassified net capital leases of $1,136 to property, plant and equipment on the Consolidated Balance Sheets as of December 31, 2021.

Goodwill

We test our goodwill for impairment on an annual basis in the fourth quarter of each fiscal year, and more frequently if events or changes in circumstances indicate that it might be impaired. Our annual qualitative goodwill impairment test during the fourth quarter of fiscal years 2022 and 2021 did not indicate an impairment existed. At December 31, 2022, the Company had goodwill with a carrying amount of $71,535. The fair value exceeded the carrying value for 2022.

The goodwill carrying amount of $71,535 did not change between December 31, 2020, December 31, 2021 and December 31, 2022.

54

Table of Contents

Intangible Assets

The following is a listing of intangible assets, the useful lives in years (amortization period) and accumulated amortization as of December 31, 2022 and December 31, 2021:

Useful Lives 

December 31, 

December 31, 

    

Years

    

2022

    

2021

Amortizable intangible assets:

Customer relationships and contracts

9-12

$

78,340

$

78,340

Trade name

 

10

 

14,780

 

14,780

Non-compete agreements

 

5

 

8,800

 

8,800

Patents

 

19

 

24

 

24

Accumulated amortization

 

 

(61,946)

 

(54,994)

Total amortizable intangible assets, net

 

 

39,998

 

46,950

Non-amortizable brand name

 

 

3,811

 

3,811

Total intangible assets, net

$

43,809

$

50,761

Non-amortizable brand name is tested annually for impairment.

Changes in intangible assets between December 31, 2021 and December 31, 2022 consist of:

Balance as of December 31, 2020

$

61,467

Amortization expense

(10,706)

Balance as of December 31, 2021

    

50,761

Amortization expense

 

(6,952)

Balance as of December 31, 2022

$

43,809

Amortization expense was $6,952, $10,706 and $10,706, for the twelve months ended December 31, 2022, 2021 and 2020, respectively.

Future amortization expense is expected to be as followed:

Year ending December 31, 

    

2023

$

6,866

2024

$

5,192

2025

$

5,192

2026

$

5,192

2027

$

5,192

Thereafter

$

12,364

Note 3. Bank revolving credit notes

On September 26, 2019, and as last amended as of March 31, 2022, we entered into an amended and restated credit agreement (Credit Agreement) with certain lenders and Wells Fargo Bank, National Association, as administrative agent (the Agent). The Credit Agreement provides for a $200,000 revolving credit facility (the Revolving Loan), with a letter of credit sub-facility in an aggregate amount not to exceed $5,000, and a swingline facility in an aggregate amount of $20,000. The Credit Agreement also provides for an additional $100,000 of capacity through an accordion feature. All amounts borrowed under the Credit Agreement mature on September 26, 2024.

The Credit Agreement contains usual and customary negative covenants for agreements of this type, including, but not limited to, restrictions on our ability to, subject to certain exceptions, create, incur or assume indebtedness, create or incur liens, make certain investments, merge or consolidate with another entity, make certain asset dispositions, pay dividends or other distributions to shareholders, enter into transactions with affiliates, enter into sale leaseback transactions or make capital expenditures. The Credit

55

Table of Contents

Agreement also requires us to satisfy certain financial covenants, including a minimum interest coverage ratio of 3.00 to 1.00 as well as a consolidated total leverage ratio not to exceed 3.25 to 1.00, although such leverage ratio can be increased in connection with certain acquisitions.

In order to provide a means of insurance against future macroeconomic events, we entered into an amendment (Second Amendment) to the Credit Agreement on June 30, 2020. The Second Amendment provided the Company with temporary changes to the total leverage ratio covenant for the period from June 30, 2020, through December 31, 2021, or such earlier date as the Company may elect (Covenant Relief Period), in return for certain increases in interest rates, fees and restrictions on certain activities of the Company, including capital expenditures, acquisitions, dividends and share repurchases. New pricing, which took effect for the quarters ending on and after September 30, 2020, includes interest at a fluctuating London Interbank Offered Rate (LIBOR) (at a floor of 75 basis points), plus 1.00% to 2.75%, along with the commitment fee ranging from 20 to 50 basis points.

During the Covenant Relief Period, the required ceiling on the Company’s total leverage ratio was 4.25 to 1.00 for quarters ending June 30, 2020 through and including December 31, 2020, and declined in quarterly increments to 3.25 to 1.00 through the quarter ending December 31, 2021.

We entered into an amendment (Third Amendment) to the Credit Agreement on March 31, 2021 which allowed the Company to incur up to $70,000 of capital expenditures in 2021, as opposed to $35,000.

We entered into an amendment (Fourth Amendment) to the Credit Agreement on March 31, 2022 which allowed the Company to incur up to $65,000 of capital expenditures in 2022, as opposed to $35,000, and revises the definition of Consolidated EBITDA to include adjustments for certain restructuring and impairment charges.

At December 31, 2022, our consolidated total leverage ratio was 1.26 to 1.00 as compared to a covenant maximum of 3.25 to 1.00 in accordance with the Credit Agreement.

At December 31, 2022, our interest coverage ratio was 13.14 to 1.00 as compared to a covenant minimum of 3.00 to 1.00 under the Credit Agreement.

Under the Credit Agreement, interest is payable quarterly at the adjusted LIBOR plus an applicable margin based on the current funded indebtedness to adjusted EBITDA ratio. The interest rate was 5.69% and 1.75% as of December 31, 2022 and December 31, 2021, respectively. Additionally, the agreement has a fee on the average daily unused portion of the aggregate unused revolving commitments. This fee was 0.25% and 0.20% as of December 31, 2022 and December 31, 2021, respectively.

The Company was in compliance with all financial covenants of its credit agreements as of December 31, 2022 and December 31, 2021. The amount borrowed on the revolving credit notes was $72,236 and $67,610 as of December 31, 2022 and December 31, 2021, respectively.

56

Table of Contents

Note 4. Leases

In February 2016, the FASB issued ASU 2016-02, Leases, creating ASC 842. For public companies, this guidance is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. For as long as the Company remained an EGC, the new guidance was effective for annual reporting periods beginning after December 15, 2022 and interim periods within fiscal years beginning after December 15, 2022. Early adoption was permitted. The Company adopted the annual reporting guidance as of January 1, 2022 using the effective date approach. The Company early adopted the interim reporting guidance during the period ended March 31, 2022.

The most significant judgements and impacts related to the application of the new guidance include the following:

In evaluating contracts to determine if they qualify as a lease, the Company considers factors such as if the Company has obtained or transferred substantially all of the rights to the underlying asset through exclusivity, if the Company can transfer or has transferred the ability to direct the use of the asset by making decisions about how and for what purpose the asset will be used and if the lessor has substantive substitution rights.
The Company made judgements regarding lease terms for certain of its leases that were in month-to-month status or that contained auto-renewal clauses. The Company estimated a lease end date based on the required length of usage of the property and calculated an ROU asset and lease liability based on the resulting estimated lease term.
The Company has recognized ROU assets and lease liabilities for operating leases that have not previously been recorded. The lease liability for operating leases is based on the net present value of future minimum lease payments.
The ROU asset for operating leases is based on the initial calculated lease liability as adjusted for the reclassification of certain balance sheet amounts such as deferred rent.
In determining the discount rate used to measure the ROU assets and lease liabilities, the Company uses the rate implicit in the lease, or if not readily available, the Company uses the Company’s incremental borrowing rate. The base rate used to establish the Company’s incremental borrowing rate is based on a Prime Rate (or LIBOR fallback option) plus fixed basis points methodology pursuant to the Company’s revolving credit facility (as amended from time to time). Certain required adjustments were then made to this base rate to arrive at an estimated incremental borrowing rate.
The Company’s real property leases vary in terms of up to fifteen years, including options for renewal periods that are considered reasonably certain to be exercised. The Company’s personal property leases vary in terms of up to seven years, including options for renewal periods that are considered reasonably certain to be exercised.
Upon adoption of the new guidance at January 1, 2022, the Company established a ROU asset of $37,908 and a lease liability of $38,185 related to its real property operating leases and established a ROU asset of $2,415 and a lease liability of $2,418 related to its personal property operating leases. Additionally, the impact on retained earnings was immaterial. The January 1, 2022 balances associated with the Company’s personal property finance leases were reclassified in the financial statements from capital lease, net to property, plant and equipment, net, from current portion of capital lease obligation to other current liabilities, and from capital lease obligation, less current maturities to other long-term liabilities on the Consolidated Balance Sheets.

The Company has real property operating leases for office and light manufacturing space. Operating leases for the Company’s personal property consist of leases for office equipment, vehicles, forklifts and storage tanks for bulk gases. The Company recognizes a ROU asset and a lease liability for operating leases based on the net present value of future minimum lease payments. Lease expense for the Company’s operating leases is recognized on a straight-line basis over the lease term, including renewal periods that are considered reasonably certain.

The Company has finance leases for two laser cutting systems and three vehicles. The Company recognizes an ROU asset and a lease liability for finance leases based on the net present value of future minimum lease payments. Lease expense for the Company’s

57

Table of Contents

finance leases is comprised of the amortization of the ROU asset and interest expense recognized based on the effective interest method.

Variable lease expense is related to certain of the Company’s real property leases and personal property leases, and it generally consists of property tax and insurance components that are for the benefit of the lessor (real property leases) and variable overage fees (personal property leases) that are remitted as part of the Company’s lease payments.

The components of lease expense were as follows:

Twelve Months Ended

    

December 31, 2022

Finance lease cost:

Amortization of finance lease assets

$

320

Interest on finance lease liabilities

42

Total finance lease expense

362

Operating lease expense

6,063

Short-term lease expense

683

Variable lease expense

217

Sublease income (1)

(1,133)

Total lease expense

$

6,192

(1)The Company subleased a portion of its Hazel Park, MI facility starting in June 2022.

Total rent expense for the twelve months ended December 31, 2021 and 2020 was $5,282 and $4,471, respectively.

Supplemental information related to leases was as follows:

Balance Sheet Classification

    

December 31, 2022

Assets:

Finance lease assets

Property, plant and equipment, net

$

1,103

Operating lease assets

Operating lease assets

36,073

Total lease assets

$

37,176

Current liabilities:

Current finance lease liabilities

Other current liabilities

$

388

Current operating lease liabilities

Current portion of operating lease obligation

4,857

Noncurrent liabilities:

 

Long-term finance lease liabilities

Other long-term liabilities

784

Long-term operating lease liabilities

Operating lease obligation, less current maturities

31,891

Total lease liabilities

$

37,920

    

December 31, 2022

Weighted average remaining lease term (in years)

Finance leases

3.1

Operating leases

7.8

Weighted average discount rate

Finance leases

3.93

%

Operating leases

2.49

%

58

Table of Contents

The table below represents ROU asset balances by type of lease:

    

December 31, 2022

Real estate leases

$

34,211

Equipment leases

2,506

Vehicle leases

 

459

Total lease assets

$

37,176

Maturities of lease liabilities at December 31, 2022 and minimum lease payments under ASC 842 having initial or remaining non-cancellable terms in excess of one year were as follows:

Operating

Finance

Year ending December 31, 

    

Leases

Leases

Total

2023

$

5,709

$

426

$

6,135

2024

 

5,668

426

6,094

2025

4,822

291

5,113

2026

4,641

66

4,707

2027

4,688

33

4,721

Thereafter

15,140

15,140

Total lease payments

40,668

1,242

41,910

Less: lease modification not yet commenced

Less: imputed interest

(3,920)

(70)

(3,990)

Total lease obligations

$

36,748

$

1,172

$

37,920

At December 31, 2021, future minimum lease payments under ASC 840 were as follows:

Operating

Finance

Year ending December 31, 

    

Leases

Leases

Total

2022

5,693

358

6,051

2023

 

5,699

358

6,057

2024

5,661

358

6,019

2025

4,832

225

5,057

2026

4,655

4,655

Thereafter

18,801

18,801

Total minimum lease payments

$

45,341

$

1,299

$

46,640

Lease related supplemental cash flow information:

Twelve Months Ended

December 31, 2022

Cash paid for amounts included in the measurement of lease liabilities for finance leases:

Operating cash flows

$

42

Financing cash flows

$

322

Cash paid for amounts included in the measurement of lease liabilities for operating leases:

Operating cash flows

$

5,672

Right-of-use assets obtained in exchange for recorded lease obligations:

 

Operating leases

$

1,271

Finance leases

$

284

ROU assets are assessed for impairment in accordance with the Company’s long-lived asset policy. The Company reassesses lease classification and remeasures ROU assets and lease liabilities when a lease is modified, and that modification is not accounted for as a separate new lease or upon certain other events that require reassessment in accordance with ASC 842.

59

Table of Contents

Note 5. Employee stock ownership plan

Under the ESOP, the Company can make annual discretionary contributions to the trust for the benefit of eligible employees in the form of cash or shares of common stock of the Company subject to the Board of Directors’ approval. For each of the twelve months ended December 31, 2022, 2021 and 2020, the Company recorded no ESOP expense.

At various times following death, disability, retirement, termination of employment or the exercise of diversification rights, an ESOP participant is entitled to receive their ESOP account balance in accordance with various distribution methods as permitted under the policies adopted by the ESOP. Prior to the IPO, all distributions were paid to participants in cash.

As of December 31, 2022, and December 31, 2021, the ESOP shares consisted of 5,684,879 and 7,292,392 in allocated shares, respectively.

Note 6. Retirement plans

The Mayville Engineering Company, Inc. 401(k) Plan (the 401(k) Plan) covers substantially all employees meeting certain eligibility requirements. The 401(k) Plan is a defined contribution plan and is intended for eligible employees to defer tax-free contributions to save for retirement. Employees may contribute up to 50% of their eligible compensation plan to the 401(k) Plan, subject to the limits of Section 401(k) of the Internal Revenue Code.

The 401(k) Plan also provides for employer discretionary profit sharing contributions and the Board of Directors authorized discretionary profit sharing contributions of $2,500, $2,057 and $1,833 for the twelve months ended December 31, 2022, 2021 and 2020, respectively, that are funded in the subsequent years.

Note 7. Income taxes

Income taxes are included in the Consolidated Statements of Comprehensive Income (Loss) at December 31, 2022 and 2021 as below:

    

December 31, 

    

December 31, 

    

December 31, 

2022

2021

2020

Current income tax expense

U.S. Federal

$

$

100

$

129

State

 

414

 

1,203

 

98

Total

 

414

 

1,303

 

227

Deferred income tax expense (benefit)

 

  

 

  

 

  

U.S. Federal

 

4,722

 

(2,790)

 

(2,457)

State

 

(1,469)

 

(456)

 

156

Total

 

3,253

 

(3,246)

 

(2,301)

Total income tax expense (benefit)

$

3,667

$

(1,943)

$

(2,074)

60

Table of Contents

A reconciliation of the statutory federal income tax provision (benefit) to the income tax provision (benefit) from continuing operations provided at December 31, 2022 and 2021, is as follows:

    

December 31, 

    

December 31, 

 

December 31, 

 

2022

2021

2020

Income tax provision (benefit) at the federal statutory rate - 21%

$

4,703

$

(1,971)

 

$

(1,925)

 

State and local income taxes - net of federal income tax benefits

831

523

79

Compensation deduction limitation - section 162(m) adjustment

(427)

14

(113)

Income taxed by shareholder before IPO

(387)

Other - perms

43

29

51

Tax credits generated

(63)

(301)

(409)

Uncertain tax positions - current year

16

75

106

Uncertain tax positions - prior year

54

(7)

115

Loan fee amortization

698

Stock compensation

50

(546)

764

Section 481(a) adjustments

(184)

Fixed assets

(452)

Return to provision

(424)

147

(121)

Changes in tax rates

(1,071)

43

Other miscellaneous tax

(45)

51

(296)

Total income tax provision (benefit)

$

3,667

$

(1,943)

$

(2,074)

Effective tax rate

 

16.4

26.5

%

22.6

%

The tax effects of temporary differences that give rise to significant portions of the deferred income tax assets and liabilities are presented below:

    

December 31, 

    

December 31, 

2022

2021

Deferred tax assets:

Deferred compensation

$

7,674

$

8,349

Inventory adjustments

1,601

1,694

Accrued expenses

411

1,530

Right of use - liability

8,853

Credits

942

656

Net operating loss

4,781

4,080

Interest Expense

721

Other

478

240

Total deferred tax assets

25,461

16,549

Deferred tax liabilities:

Property, plant and equipment

17,909

11,612

Intangibles

10,671

13,556

Right of use - asset

8,689

Other

10

22

Total deferred tax liabilities

37,279

25,190

Valuation allowance

Net deferred tax liability

$

(11,818)

$

(8,641)

Consolidated federal net operating loss carryforwards are $21,210 and do not expire. In addition, the Company has consolidated and separate company net operating loss carryforwards of $6,820 in various states.

Uncertain Tax Positions

Based on an evaluation of its tax positions, the Company recorded an unrecognized tax benefit related to research and development tax credits in its financial statements as of December 31, 2022 and December 31, 2021. The Company does not

61

Table of Contents

anticipate that there will be a material change in the balance of the unrecognized tax benefits in the next twelve months. Any interest and penalties related to uncertain tax positions are recorded in income tax expense. No amounts have been recorded as tax expense for interest and penalties for the year ended December 31, 2022 as the amount for the utilized portion of the research and development credit on the Wisconsin return is considered to be immaterial. At December 31, 2022, a total of $384 of unrecognized tax benefits would, if recognized, impact the company’s effective tax rate.

The Company files income tax returns in the United States federal jurisdiction and in various state and local jurisdictions. Federal tax returns for tax years beginning January 1, 2019, and state tax returns beginning January 1, 2018, are open for examination.

Details of Unrecognized Tax Benefits

The following is a reconciliation of beginning and ending amounts of unrecognized tax benefits:

Balance as of December 31, 2019

$

Increase from current year tax positions

106

Increase from prior year tax positions

115

Decrease from settlements with tax authority

Decrease from expiration of statute of limitations

Balance as of December 31, 2020

221

Increase from current year tax positions

100

Decrease from prior year tax positions

(7)

Decrease from settlements with tax authority

Decrease from expiration of statute of limitations

Balance as of December 31, 2021

    

314

Increase from current year tax positions

16

Increase from prior year tax positions

54

Decrease from settlements with tax authority

Decrease from expiration of statute of limitations

Balance as of December 31, 2022

$

384

Note 8. Contingencies

On August 4, 2022, the Company filed a lawsuit against Peloton Interactive, Inc. (“Peloton”) in the Supreme Court of the State of New York, New York County. The lawsuit arises from a March 2021 Supply Agreement between the parties, pursuant to which MEC was to manufacture and supply custom component parts for Peloton’s exercise bikes (the “Manufacturing Project”). In the lawsuit, the Company originally asserted two claims (1) breach and anticipatory repudiation of contract and (2) breach of the duty of good faith and fair dealing (pleaded in the alternative). In January 2023, in response to Peloton’s motion to dismiss, the court allowed the first claim to proceed and dismissed the alternative claim. In the remaining claim, MEC asserts that Peloton breached and anticipatorily repudiated the Supply Agreement by unilaterally cancelling the Manufacturing Project, and refusing to pay MEC certain monthly fixed revenue payments owed under the terms of the Supply Agreement. The total amount for damages claimed is substantial but the amount and timing of the ultimate recovery is uncertain. As a result, any recovery from this litigation or settlement of this claim is a contingent gain and will be recognized if, and when, realized or realizable.

From time to time, the Company may be involved in various claims and lawsuits, both for and against the Company, arising in the normal course of business. Although the results of litigation and claims cannot be predicted with certainty, in management’s opinion, either the likelihood of loss is remote, or any reasonably possible loss associated with the resolution of such proceedings is not expected to have a material adverse impact on the consolidated financial statements.

Note 9. Deferred compensation

The Mayville Engineering Deferred Compensation Plan is available for certain employees designated to be eligible to participate by the Company and approved by the Board of Directors. Eligible employees may elect to defer a portion of his or her

62

Table of Contents

compensation for any plan year and the deferral cannot exceed 50% of the participant’s base salary and may include the participant’s annual short-term cash incentive up to 100%. The participant’s election must be made prior to the first day of the plan year.

An employer contribution will be made for each participant to reflect the amount of any reduced allocations to the ESOP and/or 401(k) employer contributions due solely to the participant’s deferral amounts, as applicable. In addition, a discretionary amount may be awarded to a participant by the Company.

Deferrals are assumed to be invested in an investment vehicle based on the options made available to the participant (which does not include Company stock).

The deferred compensation plan provides benefits payable upon separation of service or death. Payments are to be made 30 or 180 days after date of separation from service, either in a lump-sum payment or up to five annual installments as elected by the participant when the participant first elects to defer compensation.

The deferred compensation plan is non-funded, and all future contributions are unsecured in that the employees have the status of a general unsecured creditor of the Company and the agreements constitute a promise by the Company to make benefit payments in the future. During the twelve months ended December 31, 2022, 2021 and 2020, eligible employees elected to defer compensation of $117, $0 and $63, respectively. As of December 31, 2022 and 2021, the short-term portion accrued for all benefit years less than 12 months under this plan was $18,062 and $0, respectively. As of December 31, 2022 and 2021, the long-term portion accrued for all benefit years greater than 12 months under this plan was $3,132 and $25,117. These amounts include the initial deferral of compensation as adjusted for (a) subsequent changes in the share value of the Company stock pursuant to the IPO or (b) following the IPO in the investment options chosen by the participants. Total expense (credit) for the deferred compensation plan for the twelve months ended December 31, 2022, 2021 and 2020 amounted to $(3,051), $812 and $725, respectively. These expenses (credits) are included in profit sharing, bonuses and deferred compensation on the Consolidated Statements of Comprehensive Income (Loss). Additionally, the Company made distributions of $1,048, $1,327 and $107 for the twelve months ended December 31, 2022, 2021 and 2020, respectively.

Note 10. Self-Funded insurance

The Company is self-funded for the medical benefits provided to its employees and their dependents. Healthcare costs are expensed as incurred and are based upon actual claims paid, reinsurance premiums, administration fees and estimated unpaid claims. As of March 31, 2020, the Company consolidated its benefit plans and now has no specific stop loss limitation but has an aggregate stop loss limit to mitigate risk. Expense related to this contract was $17,146, $17,157 and $20,849 for the twelve months ended December 31, 2022, 2021 and 2020, respectively. An estimated accrued liability of $900 and $1,471 was recorded as of December 31, 2022 and December 31, 2021, respectively, for estimated unpaid claims and is included within other current liabilities on the Consolidated Balance Sheets.

Note 11. Segments

The Company applies the provisions of ASC 280, Segment Reporting. An operating segment is defined as a component that engages in business activities whose operating results are reviewed by the chief operating decision maker and for which discrete financial information is available. Based on the provisions of ASC 280, the Company has determined it has one operating segment. The Company does not earn revenues or have long-lived assets located in foreign countries.

Note 12. Fair value of financial instruments

Fair value provides information on what the Company may realize if certain assets were sold or might pay to transfer certain liabilities based upon an exit price. Financial assets and liabilities that are measured and reported at fair value are classified into a three-level hierarchy that prioritizes the inputs used in the valuation process. A financial instrument’s categorization within the valuation hierarchy is based on the lowest level of any input that is significant to the fair value measurement. The hierarchy is based on the observability and objectivity of the pricing inputs, as follows:

Level 1 – Quoted prices in active markets for identical assets or liabilities.

63

Table of Contents

Level 2 – Significant directly observable data (other than Level 1 quoted prices) or significant indirectly observable data through corroboration with observable market data. Inputs would normally be (i) quoted prices in active markets for similar assets or liabilities, (ii) quoted prices in inactive markets for identical or similar assets or liabilities or (iii) information derived from or corroborated by observable market data. Long-term debt is classified as a Level 2 fair value input.
Level 3 – Prices or valuation techniques that require significant unobservable data inputs. These inputs would normally be the Company’s own data and judgements about assumptions that market participants would use in pricing the asset or liability.

The following table lists the Company’s financial assets and liabilities accounted for at fair value by the fair value hierarchy:

Balance at

Fair Value Measurements at

December 31, 

Report Date Using

    

2022

    

(Level 1)

    

(Level 2)

    

(Level 3)

Deferred compensation liability

$

21,194

$

21,194

$

$

Total

$

21,194

$

21,194

$

$

Balance at

Fair Value Measurements at

December 31, 

Report Date Using

    

2021

    

(Level 1)

    

(Level 2)

    

(Level 3)

Deferred compensation liability

$

25,117

$

22,272

$

2,845

$

Total

$

25,117

$

22,272

$

2,845

$

Fair value measurements for the Company’s cash and cash equivalents are classified based upon Level 1 measurements because such measurements are based upon quoted market prices in active markets for identical assets.

Accounts receivable, accounts payable, long-term debt and accrued liabilities are recorded in the Consolidated Balance Sheets at cost and approximate fair value.

Deferred compensation liabilities are recorded at amounts due to participants at the time of deferral. Deferrals are invested in an investment vehicle based on the options made available to the participant, considered to be Level 1 and Level 2 on the fair value hierarchy, with the majority of the balance as Level 1. The change in fair value is recorded in the profit sharing, bonuses, and deferred compensation line item on the Consolidated Statements of Comprehensive Income (Loss). The short-term and long-term balances due to participants are reflected on the current portion of deferred compensation and deferred compensation, less current portion line items, respectively, on the Consolidated Balance Sheets.

The Company’s non-financial assets such as intangible assets and property, plant, and equipment are re-measured at fair value when there is an indication of impairment and adjusted only when an impairment charge is recognized.

Note 13. Revenue recognition

Contract Assets and Contract Liabilities

The Company has contract assets and contract liabilities, which are included in tooling in progress and other current liabilities on the Consolidated Balance Sheets, respectively. Contract assets include products where the Company has satisfied its performance obligation, but receipt of payment is contingent upon delivery. Contract liabilities include deferred tooling revenue, where the performance obligation was not met. The performance obligation is satisfied when the tooling is completed and the customer signs off through the PPAP or other documented customer acceptance. Cost of goods sold is recognized and released from the balance sheet when control of the tooling promised under contract is transferred to the customer.

64

Table of Contents

The Company’s contracts with customers are short-term in nature; therefore, revenue is typically recognized, billed and collected within a 12-month period. The following table reflects the changes in our contract assets and liabilities during the twelve months ended December 31, 2022.

Contract

Contract

    

Assets

    

Liabilities

As of December 31, 2019

$

1,589

$

914

Net activity

1,537

146

As of December 31, 2020

3,126

1,060

Net activity

824

1,658

As of December 31, 2021

3,950

2,718

Net activity

3,988

3,423

As of December 31, 2022

$

7,938

$

6,141

Disaggregated Revenue

The following tables represents a disaggregation of revenue by product category and end market:

Twelve Months Ended

December 31, 

2022

    

2021

    

2020

Outdoor sports

$

9,498

$

10,039

$

7,225

Fabrication

324,254

295,988

227,476

Performance structures

109,888

73,207

60,597

Tube

73,868

58,749

49,868

Tank

38,246

25,816

19,431

Total

555,754

463,799

364,597

Intercompany sales elimination

(16,362)

(8,973)

(6,991)

Total, net sales

$

539,392

$

454,826

$

357,606

Twelve Months Ended

December 31, 

2022

2021

2020

Commercial vehicle

$

212,992

$

156,488

120,838

Construction & access

 

111,525

92,298

65,510

Powersports

 

87,531

90,247

73,220

Agriculture

 

57,412

 

49,827

34,151

Military

24,831

24,147

31,675

Other

45,101

41,819

32,212

Total, net sales

$

539,392

$

454,826

357,606

Note 14. Common equity

At December 31, 2022, the authorized stock of the Company consisted of 75,000,000 shares of common stock without par value.

65

Table of Contents

Changes in outstanding common shares are summarized as follows:

    

2022

    

2021

    

2020

Beginning balance

20,335,934

20,059,390

19,632,211

Treasury stock purchases

(559,945)

(147,785)

(320,245)

Common stock issued (including share-based compensation impact)

396,757

424,329

747,424

Ending balance

20,172,746

20,335,934

20,059,390

Note 15. Earnings per share

The Company computes earnings per share in accordance with ASC 260, Earnings per Share. In accordance with ASC 260, outstanding options will be considered to have been exercised and outstanding as of the beginning of the period if the average market price of the common stock during the period exceeds the exercise price of the options (they are “in the money”), and the assumed exercise of the options do not have an anti-dilutive impact on earnings per share.

A reconciliation of basic and diluted net income (loss) per share attributable to the Company were as follows:

Twelve Months Ended December 31, 

2022

2021

2020

Net income (loss) attributable to MEC

$

18,727

$

(7,451)

$

(7,092)

Average shares outstanding

20,399,737

20,404,543

19,898,122

Basic income (loss) per share

$

0.92

$

(0.37)

$

(0.36)

Average shares outstanding

20,399,737

20,404,543

19,898,122

Effect of dilutive share-based compensation

282,891

426,434

-

Total potential shares outstanding

20,682,628

20,830,977

19,898,122

Diluted income (loss) per share

$

0.91

$

(0.36)

$

(0.36)

Options in the money that were not included in the computation of diluted earnings per share because they would have had an antidilutive impact on earnings per share were as follows:

Twelve Months Ended December 31, 

    

2022

    

2021

    

2020

Stock options

300,510

600,530

Note 16. Concentration of major customers

The following customers accounted for 10% or greater of the Company’s recorded net sales and net trade receivables:

Accounts Receivable

Net Sales

As of

As of

Twelve Months Ended December 31, 

December 31, 

December 31, 

2022

    

2021

    

2020

    

2022

    

2021

Customer

A

 

17.2

%

16.6

%  

15.3

%  

11.0

%  

10.2

%  

B

 

11.9

%

10.8

%  

11.1

%  

<10

%  

<10

%  

C

 

<10

%

10.0

%  

12.5

%  

<10

%  

<10

%  

D

 

16.0

%

14.1

%  

11.6

%  

<10

%  

<10

%  

E

 

<10

%

<10

%  

<10

%  

12.6

%  

11.2

%  

Note 17. Stock-based compensation

The Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan provided the Company the ability to grant monetary payments based on the value of its common stock, up to 2,000,000 shares.

66

Table of Contents

On April 20, 2021, shareholders of the Company approved an amendment to the 2019 Omnibus Incentive Plan increasing the number of shares of common stock authorized for issuance by 2,500,000 shares.

The Company recognizes stock-based compensation using the fair value provisions prescribed by ASC 718, Compensation – Stock Compensation. Accordingly, compensation costs for awards of stock-based compensation settled in shares are determined based on the fair value of the share-based instrument at the time of grant and are recognized as expense over the vesting period of the share-based instrument. For units, fair value is equivalent to the adjusted closing stock price at the date preceding the date of grant. The Black-Scholes option pricing model is utilized to determine fair value for options.

Cancellations and forfeitures are accounted for as incurred.

Stock awards were granted on July 19, 2022, April 19, 2022, February 28, 2022, June 3, 2021, May 12, 2021, February 28, 2021, May 12, 2020, February 27, 2020, and May 8, 2019. There were no stock awards granted prior to this.

The Company’s stock-based compensation expense by award type is summarized as follows:

Twelve Months Ended December 31, 

2022

    

2021

    

2020

One-time IPO unit awards

$

$

$

1,029

Unit awards

 

2,490

3,006

2,305

Option awards

 

1,269

1,956

1,398

Stock based compensation expense, net of tax

$

3,759

$

4,962

$

4,732

One-time IPO unit awards were fully expensed as of December 31, 2020.

A rollforward of unrecognized stock-based compensation expense is displayed in the table below. Unrecognized stock-based compensation expense as of December 31, 2022 will be expensed over the remaining requisite service period from which individual award values relate, up to July 19, 2025.

    

Units

    

Options

    

Total

Balance as of December 31, 2020

$

1,545

$

1,432

$

2,977

Grants

3,456

2,130

5,586

Forfeitures

(319)

(69)

(388)

Expense

(3,006)

(1,956)

(4,962)

Balance as of December 31, 2021

1,676

1,537

3,213

Grants

4,426

2,573

6,999

Forfeitures

(1,873)

(1,791)

(3,664)

Expense

(2,490)

(1,269)

(3,759)

Balance as of December 31, 2022

$

1,739

$

1,050

$

2,789

Units

A summary of the Company’s unit award activity is as follows:

Twelve Months Ended December 31, 

2022

2021

Weighted-Average

    

    

Weighted-Average

Grant Date Fair

Grant Date Fair

    

Number of Units

    

Value

    

Number of Units

    

Value

Nonvested, beginning of year

 

354,906

$

11.59

 

456,257

$

7.69

Grants

 

477,277

$

9.27

 

233,963

$

14.54

Forfeitures

 

(167,641)

$

11.18

 

(20,412)

$

13.03

Vested

 

(271,992)

$

10.76

 

(314,902)

$

8.04

Nonvested, end of year

 

392,550

$

9.52

 

354,906

$

11.59

67

Table of Contents

Stock Options

A summary of the Company’s stock option award activity is as follows:

Twelve Months Ended December 31, 

2022

2021

    

    

Weighted-Average

    

Number of

    

Weighted-Average

Number of Options

Exercise Price

Options

Exercise Price

Nonvested, beginning of year

 

526,895

$

10.91

 

718,528

$

8.74

Grants

 

479,947

$

10.32

 

307,365

$

14.01

Forfeitures

 

(309,863)

$

11.30

 

(14,337)

$

10.41

Vested

 

(512,927)

$

9.18

 

(484,661)

$

9.68

Nonvested, end of year

 

184,052

$

13.51

 

526,895

$

10.91

As of December 31, 2022, there were 250,505, 703,523 and 153,686 options issued and outstanding at exercise prices of $17.00, $7.12, and $14.01 per share, respectively, with a remaining weighted average contractual life of 7.22 years. The intrinsic values of these outstanding options was $0, $5.54 and $0, respectively, based on the Company’s stock price as of December 31, 2022.

The Company uses the Black-Scholes valuation model to estimate the fair value of stock options which were $5.36 and $6.93 for those options granted during the years ended December 31, 2022 and 2021, respectively. The Company utilized the following assumptions in determining these fair values:

Inputs

Assumptions

    

2022

    

2021

 

2020

Stock price at date of grant/exercise price

$

10.32

$

14.01

$

7.12

Expected term (in years)

5.75

5.75

5.75

Estimated volatility

55.3

%

53.9

%

41.2

%

Estimated risk-free rate of return

1.9

%

0.8

%

1.2

%

Expected dividend yield

0.0

%

0.0

%

0.0

%

The Company does not have historical option exercise data to estimate the expected term. For options granted, the Company utilizes the simplified method prescribed by Staff Accounting Bulletin (SAB) Topic 14 to estimate the expected term, which is calculated as the average of the vesting term and the contractual term. The option grants have a contractual life of 10 years and a requisite service period, or vesting term, of 2 years with 50% vesting on the annual anniversary dates. Applying the simplified method, the Company calculated the expected terms of each tranche to be 5.5 years and 6.0 years resulting in an average expected term of 5.75 years for these awards. The Company will continue to employ the simplified method until more relevant detailed information becomes available from which to make this estimate.

Note 18. Greenwood facility closure and restructuring

Based on the Company’s investments in new technology and automation, which have resulted in a smaller footprint requirement to maintain manufacturing capacity, the Company announced the closing of its Greenwood, SC facility on May 6, 2020. The facility closure was finalized during the third quarter of 2020 with all customer components re-distributed amongst five other MEC manufacturing facilities. All customer relationships and manufactured components were maintained through this transition without disruption to our customers.

On July 1, 2021, the Company entered into a contract to sell the Greenwood, SC facility for $5,300 before commissions and fees. Settlement of the contract occurred on August 30, 2021, resulting in a gain on the sale of the asset of $1,374, which is classified in cost of sales on the Consolidated Statements of Comprehensive Income (Loss) for the twelve months ended December 31, 2021.

Costs associated with the closure were accounted for in accordance with ASC 420 Exit or Disposal Cost Obligations.

For the twelve months ended December 31, 2021, the Company incurred $0 costs associated with the facility closure and restructuring. For the twelve months ended December 31, 2020, the Company incurred $2,524 of costs associated with the facility closure and restructuring, including $282 for severance and retention bonus, $931 for the loss on sale of manufacturing equipment not

68

Table of Contents

transferred to another MEC facility, $78 for the buyout of operating leases, $622 for the disposition of inventory, and the remainder mostly related to costs to close the facility and relocate equipment to other facilities. These costs were recognized on the cost of sales line item of the Consolidated Statements of Comprehensive Income (Loss).

The Greenwood facility had a net book value of approximately $3,552 as of December 31, 2020 and was classified as assets held for sale on the Consolidated Balance Sheets.

The following table summarizes the activity related to the Greenwood restructuring through December 31, 2020:

    

Employee

    

    

    

Severance and

Inventory Excess

Retention Bonus

and Obsolescence

Reserve

Reserve

Other Reserves

Total Reserves

Balance as of December 31, 2019

$

$

$

$

Charges

282

622

1,620

2,524

Cash receipts (payments)

(282)

16

(1,620)

(1,886)

Accrual adjustments

(638)

(638)

Balance as of December 31, 2020

$

$

$

$

As a result of the Greenwood facility closure, future earnings and cash flows were not impacted by the depreciation associated with the assets disposed of or the facility, maintenance costs of the facility and facility personnel expenses.

Assets disposed of had a net book value of $2,475 with a remaining useful life of approximately 3 years resulting in approximately $825 of annual depreciation expense that is no longer incurred. The facility had a net book value of $3,552 as of August 30, 2021 with a remaining weighted average useful life of approximately 27 years resulting in approximately $133 of annual depreciation expense that is no longer incurred.

Additionally, the Company no longer has approximately $800 of annual facility maintenance costs, including utilities, that are no longer incurred.

Total personnel costs associated with the facility were approximately $2,250 for the first quarter 2020 resulting in approximately $9,000 of annual personnel expenses; the majority of these costs were transitioned to five other MEC facilities that are now manufacturing these components. As previously mentioned, all customer relationships and manufacturing programs were retained through the transition.

The aforementioned depreciation, maintenance costs, and personnel expenses associated with the Greenwood facility have been classified as cost of sales on the Condensed Consolidated Statements of Comprehensive Loss.

Note 19. Valuation and qualifying accounts

    

Balance at

    

    

    

Balance at

beginning of

end of

Description

period

Additions

Deductions

period

Year ended December 31, 2022

 

  

 

  

 

  

 

  

Allowance for doubtful accounts

$

631

$

697

$

784

$

545

Year ended December 31, 2021

 

 

 

 

Allowance for doubtful accounts

$

1,298

$

751

$

1,418

$

631

Year ended December 31, 2020

 

 

 

 

Allowance for doubtful accounts

$

526

$

1,582

$

810

$

1,298

Note 20. Subsequent events

The Company has evaluated subsequent events and transactions for potential recognition or disclosure in the consolidated financial statements through March 1, 2023, the date on which the consolidated financial statements were available to be issued.

69

Table of Contents

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

Not applicable.

Item 9A. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to provide reasonable assurance that information required to be disclosed in the reports we file or submit under the Securities Exchange Act of 1934, as amended (the Exchange Act), is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosure. In designing disclosure controls and procedures, our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible disclosure controls and procedures. The design of any disclosure controls and procedures also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired objectives.

Our management, under the supervision of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this Annual Report on Form 10-K and has concluded that, as of the end of such period, our disclosure controls and procedures were effective at the reasonable assurance level.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal controls over financial reporting, as such term is defined in Rules 13a- 15(f) and 15d-15(f) of the Exchange Act. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with GAAP. Our internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets, (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors, and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.

Our management, under the supervision of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our internal control over financial reporting based on the framework in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, our management has concluded that, as of December 31, 2022, our internal control over financial reporting was effective.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Attestation Report of the Registered Public Accounting Firm (PCAOB ID No. 34)

This Annual Report on Form 10-K does not include an attestation report of our independent registered public accounting firm due to an exemption established by the Jumpstart Our Business Startups Act of 2012 for “emerging growth companies.”

Changes in Internal Control Over Financial Reporting

There were no changes in the Company’s internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act) during the fourth quarter of 2022 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

70

Table of Contents

Item 9B. Other Information.

None.

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections.

Not applicable.

71

Table of Contents

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

The information required by this Item is included under the captions “Election of Directors,” “Corporate Governance” and “Delinquent Section 16(a) Reports” in the Company’s definitive proxy statement for its 2023 annual meeting of shareholders (Proxy Statement) and is hereby incorporated herein by reference. Information with respect to the executive officers of the Company appears in Item 1 of this Annual Report on Form 10-K.

The Company has adopted a Code of Conduct and Ethics that applies to all of the Company’s directors, officers and employees, including the Company’s Chief Executive Officer and Chief Financial Officer and other persons performing similar functions. The Company has posted a copy of the Code of Conduct and Ethics on its website at www.mecinc.com. The Company intends to satisfy the disclosure requirements under Item 5.05 of Form 8-K regarding amendments to, or waivers from, the Code of Conduct and Ethics by posting such information on its website at www.mecinc.com. The Company is not including the information contained on its website as part of, or incorporating it by reference into, this report.

Item 11. Executive Compensation.

The information required by this Item is included under the captions “Corporate Governance – Transactions with Related Persons,” “Executive Compensation” and “2022 Director Compensation” in the Proxy Statement and is hereby incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The information required by this Item with respect to security ownership of certain beneficial owners and management is included under the caption “Principal Shareholders” in the Proxy Statement and is hereby incorporated by reference.

The following table sets forth information with respect to compensation plans under which equity securities of the Company are authorized for issuance as of December 31, 2022:

    

    

    

Number of

securities

Number of

remaining

securities issued

available for

or to be issued

future issuance

upon vesting of

Weighted average

under equity

units or exercise

exercise price of

compensation

of outstanding

outstanding

plans (excluding

options, warrants,

options, warrants

securities reflected

Plan Category

and rights

and rights (1)

in column (a))

Equity compensation plans approved by security holders (2)

2,422,006

$

10.31

2,077,995

Equity compensation plans not approved by security holders

 

Total

2,422,006

$

10.31

2,077,995

(1)Represents weighted average exercise price of 1,107,714 outstanding options and does not take into account restricted stock units.
(2)Consists of the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan.

Item 13. Certain Relationships and Related Transactions, and Director Independence.

The information required by this Item is included under the caption “Corporate Governance” in the Proxy Statement and is hereby incorporated by reference.

Item 14. Principal Accounting Fees and Services.

The information required by this Item is included under the caption “Miscellaneous – Independent Registered Public Accounting Firm” in the Proxy Statement and is hereby incorporated by reference.

72

Table of Contents

PART IV

Item 15. Exhibits, Financial Statement Schedules.

Consolidated Financial Statements

The consolidated financial statements listed in the accompanying index to the consolidated financial statements are filed as part of this Annual Report on Form 10-K.

Financial Statement Schedules

All financial statement schedules have been omitted because they are not applicable or the required information is included in the consolidated financial statements and the related notes thereto.

Exhibits

The exhibits listed in the exhibit index below are filed as part of this Annual Report on Form 10-K.

73

Table of Contents

EXHIBIT INDEX

Exhibit
Number

    

Description

3.1

Amended and Restated Articles of Incorporation of Mayville Engineering Company, Inc. (incorporated by reference to Exhibit 3.1 to Amendment No. 1 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 29, 2019).

3.2

Bylaws of Mayville Engineering Company, Inc. as amended through December 21, 2022 (incorporated by reference to Exhibit 3.2 to the Company’s Current Report on Form 8-K filed on December 21, 2022).

4

Description of Mayville Engineering Company, Inc.’s Securities (incorporated by reference to Exhibit 4 to the Company’s Annual Report on Form 10-K filed on March 2, 2020).

10.1

Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan, as amended through April 20, 2021 (incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement on Schedule 14A filed on March 8, 2021).

10.2

Form of Restricted Stock Unit Award Agreement (Non-Employee Director) under the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan (incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q filed on June 18, 2019).

10.3

Form of Restricted Stock Unit Award Agreement (Employee) under the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan (incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q filed on June 18, 2019).

10.4

Form of Stock Option Award Agreement under the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan (incorporated by reference to Exhibit 10.8 to Amendment No. 1 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 29, 2019).

10.5

Form of Restricted Stock Award Agreement (Non-Employee Director) under the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan (incorporated by reference to Exhibit 10.11 to Amendment No. 1 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 29, 2019).

10.6

Form of Restricted Stock Award Agreement (Employee) under the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan (incorporated by reference to Exhibit 10.12 to Amendment No. 1 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 29, 2019).

10.7

Form of Stock Option Award Agreement under the Mayville Engineering Company, Inc. 2019 Omnibus Incentive Plan (Full Term Exercise Period on Retirement) (incorporated by reference to Exhibit 10 to the Company’s Current Report on Form 8-K filed on January 29, 2020).

10.8

Mayville Engineering Company, Inc. Long-Term Incentive Plan, as amended and restated effective May 13, 2019 (incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q filed on June 18, 2019).

10.9

Mayville Engineering Company, Inc. Deferred Compensation Plan (incorporated by reference to Exhibit 10.3 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 12, 2019).

10.10

Form of Severance Agreement between Mayville Engineering Company, Inc. and Jagadeesh A. Reddy (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on July 20, 2022).

10.11

Form of Change in Control Employment and Severance Agreement between Mayville Engineering Company, Inc. and Jagadeesh A. Reddy (incorporated by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K filed on July 20, 2022).

74

Table of Contents

10.12

Form of Severance Agreement between Mayville Engineering Company, Inc. and each of Robert D. Kamphuis and Todd M. Butz (incorporated by reference to Exhibit 10.6 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 12, 2019).

10.13

Form of Change in Control Employment and Severance Agreement between Mayville Engineering Company, Inc. and each of Robert D. Kamphuis and Todd M. Butz (incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q filed on November 3, 2020).

10.14

Form of Severance Agreement between Mayville Engineering Company, Inc. and each of Ryan F. Raber, Randall P. Stille and Sean P. Leuba (incorporated by reference to Exhibit 10.3 to the Company’s Current Report on Form 8-K filed on July 20, 2022).

10.15

Form of Change in Control Employment and Severance Agreement between Mayville Engineering Company, Inc. and each of Ryan F. Raber, Randall P. Stille and Sean P. Leuba (incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q filed on November 3, 2020).

10.16

Memorandum of Agreement between Mayville Engineering Company, Inc. and Robert D. Kamphuis (incorporated by reference to Exhibit 10.7 to the Registration Statement on Form S-1 (File No. 333-230840) filed on April 12, 2019).

10.17

Retirement Transition Agreement, dated as of March 31, 2022, by and between Mayville Engineering Company, Inc. and Robert D. Kamphuis (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on April 1, 2022).

10.18

Agreement on Confidentiality, Assignment of Intellectual Property, Non-Competition and Non-Solicitation, dated as of March 31, 2022, by and between Mayville Engineering Company, Inc. and Robert D. Kamphuis (incorporated by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K filed on April 1, 2022).

10.19

Amended and Restated Credit Agreement, dated as of September 26, 2019, by and among Mayville Engineering Company, Inc., the lenders from time to time party thereto, Wells Fargo Bank, National Association, as Administrative Agent for the lenders, and Wells Fargo Securities, LLC, as Sole Lead Arranger and Sole Bookrunner (incorporated by reference to Exhibit 10 to the Company’s Current Report on Form 8-K filed on October 2, 2019).

10.20

Second Amendment, dated as of June 30, 2020, to the Amended and Restated Credit Agreement, dated as of September 26, 2019, by and among Mayville Engineering Company, Inc., the lenders from time to time party thereto, Wells Fargo Bank, National Association, as Administrative Agent for the lenders, and Wells Fargo Securities, LLC, as Sole Lead Arranger and Sole Bookrunner (incorporated by reference to Exhibit 10 to the Company’s Current Report on Form 8-K filed on July 6, 2020).

10.21

Third Amendment, dated as of March 31, 2021, to the Amended and Restated Credit Agreement, dated as of September 26, 2019, by and among Mayville Engineering Company, Inc., the lenders from time to time party thereto, Wells Fargo Bank, National Association, as Administrative Agent for the lenders, and Wells Fargo Securities, LLC, as Sole Lead Arranger and Sole Bookrunner (incorporated by reference to Exhibit 10 to the Company’s Current Report on Form 8-K filed on April 6, 2021).

10.22

Fourth Amendment, dated as of March 31, 2022, to the Amended and Restated Credit Agreement, dated as of September 26, 2019, by and among Mayville Engineering Company, Inc., the lenders from time to time party thereto, and Wells Fargo Bank, National Association, as Administrative Agent for the lenders (incorporated by reference to Exhibit 10 to the Company’s Current Report on Form 8-K filed on April 1, 2022).

21*

List of Subsidiaries of Mayville Engineering Company, Inc.

23*

Consent of Independent Registered Public Accounting Firm.

75

Table of Contents

31.1*

Certification of Principal Executive Officer Pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2*

Certification of Principal Financial Officer Pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32*

Certification of Principal Executive Officer and Principal Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906of the Sarbanes-Oxley Act of 2002.

99

Proxy Statement for the 2023 Annual Meeting of Shareholders. [To be filed with the Securities and Exchange Commission under Regulation 14A within 120 days after December 31, 2022; except to the extent specifically incorporated by reference, the Proxy Statement for the 2023 Annual Meeting of Shareholders shall not be deemed to be filed with the Securities and Exchange Commission as part of this Annual Report on Form 10-K].

101.INS

Inline XBRL Instance Document

101.SCH

Inline XBRL Taxonomy Extension Schema Document

101.CAL

Inline XBRL Taxonomy Extension Calculation Linkbase Document

101.DEF

Inline XBRL Taxonomy Extension Definition Linkbase Document

101.LAB

Inline XBRL Taxonomy Extension Label Linkbase Document

101.PRE

Inline XBRL Taxonomy Extension Presentation Linkbase Document

104

Cover Page Interactive Date File (embedded within the Inline XBRL document)

*

Filed herewith.

Management contract, compensatory plan or arrangement

76

Table of Contents

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Report of Independent Registered Public Accounting Firm

43

Consolidated Balance Sheets as of December 31, 2022 and 2021

44

Consolidated Statements of Comprehensive Income (Loss) for the Twelve Months ended December 31, 2022 and 2021, and 2020

45

Consolidated Statements of Cash Flows for the Twelve Months ended December 31, 2022 and 2021, and 2020

46

Consolidated Statements of Stockholders’ Equity for the Twelve Months ended December 31, 2022 and 2021, and 2020

47

Notes to Consolidated Financial Statements

48

Item 16. Form 10-K Summary

None.

77

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

    

MAYVILLE ENGINEERING COMPANY, INC.

Date: March 1, 2023

By:

/s/ Jagadeesh A. Reddy

Jagadeesh A. Reddy

President and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Report has been signed below by the following persons on behalf of the Registrant in the capacities and on the dates indicated.

Name

    

Title

    

Date

/s/ Jagadeesh A. Reddy

President, Chief Executive Officer (Principal Executive Officer) and Director

March 1, 2023

Jagadeesh A. Reddy

/s/ Todd M. Butz

Chief Financial Officer (Principal Financial and Accounting Officer)

March 1, 2023

Todd M. Butz

/s/ Allen J. Carlson

Director

March 1, 2023

Allen J. Carlson

/s/ Timothy L. Christen

Director

March 1, 2023

Timothy L. Christen

/s/ Steven L. Fisher

Director

March 1, 2023

Steven L. Fisher

/s/ Jennifer J. Kent

Director

March 1, 2023

Jennifer J. Kent

/s/ Robert L. McCormick

Director

March 1, 2023

Robert L. McCormick

/s/ Patrick D. Michels

Director

March 1, 2023

Patrick D. Michels

/s/ Jay O. Rothman

Director

March 1, 2023

Jay O. Rothman

78