MERIT MEDICAL SYSTEMS INC - Annual Report: 2021 (Form 10-K)

Table of Contents

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

​

FORM 10-K

(Mark One)

​

For the fiscal year ended December 31, 2021

or

For the transition period from                to                     .

Commission File Number 0-18592

​

MERIT MEDICAL SYSTEMS, INC.

(Exact name of registrant as specified in its charter)

​

 1600 West Merit Parkway, South Jordan, Utah 84095

(Address of principal executive offices, including zip code)

​

Registrant’s telephone number, including area code: (801) 253-1600

Securities registered pursuant to Section 12(b) of the Act:

​

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒  No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒  No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and "emerging growth company" in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒ 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐  No ☒ 

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant on June 30, 2021, based upon the closing price of the common stock as reported by the NASDAQ Global Select Market on such date, was approximately $3.6 billion. As of February 24, 2022, the registrant had 56,572,579 shares of common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following document are incorporated by reference in Part III of this Report: the registrant’s definitive proxy statement relating to its 2022 Annual Meeting of Shareholders.

​

​

​

TABLE OF CONTENTS

​

​

​

​

​

Table of Contents

PART I

Unless otherwise indicated in this report, “Merit,” “we,” “us,” “our,” and similar terms refer to Merit Medical Systems, Inc. and our consolidated subsidiaries.

DISCLOSURE REGARDING FORWARD-LOOKING STATEMENTS

This report includes “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements in this report, other than statements of historical fact, are “forward-looking statements” for purposes of these provisions, including any projections of earnings, revenues or other financial items, any statements of the plans and objectives of our management for future operations, any statements concerning proposed new products or services, any statements regarding the integration, development or commercialization of the business or any assets acquired from other parties, any statements regarding future economic conditions or performance, and any statements of assumptions underlying any of the foregoing. In some cases, forward-looking statements can be identified by the use of terminology such as “may,” “will,” “expects,” “plans,” “anticipates,” “intends,” “seeks,” “believes,” “estimates,” “potential,” “forecasts,” “continue,” or other forms of these words or similar words or expressions, or the negative thereof or other comparable terminology. Although we believe that the expectations reflected in the forward-looking statements contained herein are reasonable, there can be no assurance that such expectations or any of the forward-looking statements will prove to be correct, and actual results will likely differ, and could differ materially, from those projected or assumed in the forward-looking statements. Investors are cautioned not to unduly rely on any such forward-looking statements.

All subsequent forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by these cautionary statements. Our actual results will likely differ, and may differ materially, from anticipated results. Financial estimates are subject to change and are not intended to be relied upon as predictions of future operating results. All forward-looking statements included in this report are made as of the date hereof and are based on information available to us as of such date. We assume no obligation to update any forward-looking statement. If we do update or correct one or more forward-looking statements, investors and others should not conclude that we will make additional updates or corrections.

Our future financial condition and results of operations, as well as any forward-looking statements, are subject to inherent risks and uncertainties. Please see Item 1A “Risk Factors” for a discussion of these risks and uncertainties.

DISCLOSURE REGARDING TRADEMARKS

This report includes trademarks, tradenames and service marks that are our property or the property of other third parties. Solely for convenience, such trademarks and tradenames sometimes appear without any “™” or “®” symbol. However, failure to include such symbols is not intended to suggest, in any way, that we will not assert our rights or the rights of any applicable licensor, to these trademarks and tradenames.

​

Item 1.Business.

Our Company

Merit Medical Systems, Inc. is a leading manufacturer and marketer of proprietary medical devices used in interventional, diagnostic and therapeutic procedures, particularly in cardiology, radiology, oncology, critical care and endoscopy. We strive to be the most customer-focused company in healthcare. Each day we are determined to make a difference by understanding our customers’ needs and innovating and delivering a diverse range of products that improve the lives of people and communities throughout the world. We believe that long-term value is created for our customers, employees, shareholders, and communities when we focus outward and are determined to deliver an exceptional customer experience.

Merit Medical Systems, Inc. was founded in 1987 by Fred P. Lampropoulos, Kent W. Stanger, Darla Gill and William Padilla. Initially we focused our operations on injection and insert molding of plastics. Our first product was a specialized control syringe used to inject contrast solution into a patient’s arteries for a diagnostic cardiac procedure called an

1

Table of Contents

angiogram. Since that time, our products and product lines have expanded substantially, both through internal research and development projects and through strategic acquisitions.

Business Strategy

Our business strategy focuses on five target areas as follows:

We conduct our operations through a number of domestic and foreign subsidiaries and representative offices. Our principal offices are located at 1600 West Merit Parkway, South Jordan, Utah, 84095, and our telephone number is (801) 253-1600. We maintain an internet website at www.merit.com.

COVID-19 Pandemic

​

During the last two years, the COVID-19 pandemic has had an unsteady but significant impact on our business, suppliers, customers, employees, families and communities. Measures designed to contain the virus, including travel bans and restrictions, border closures, quarantines, shelter-in-place orders, business limitations and shutdowns continued through the year. In addition, we continued to execute, and enhance, protocols to promote the safety of our employees in the workplace while producing essential medical products.

​

In efforts to contain the spread of the virus, many of our hospital customers prioritized their efforts on their COVID-19 response, diverting their focus and resources away from their normal operations and restricting access to their sites. In 2021, these restrictions were generally reduced, and we were able to achieve the highest annual revenue in the history of the Company. However, lingering effects continue, including unpredictable freight and other logistical expenses and obstacles, and the responses of government authorities and our customers vary from region to region. Please refer to the discussion of the risks and uncertainties associated with the COVID-19 pandemic under the heading “The COVID-19 pandemic has negatively impacted our business and operations around the world and may continue to materially and adversely impact our business, operations and financial results.” set forth below in Item 1A “Risk Factors.”

​

Products

We design, develop, market and manufacture, through our own operations and contract manufacturers, medical products that offer a high level of quality, value and safety to our customers, as well as the patients they serve. Our products are used in the following clinical areas: radiology; diagnostic and interventional cardiology; interventional radiology; neurointerventional radiology; vascular, general and thoracic surgery; electrophysiology; cardiac rhythm management; interventional pulmonology; interventional nephrology; orthopedic spine surgery; interventional oncology; pain management; breast cancer surgery, outpatient access centers; intensive care; computed tomography; ultrasound; and interventional gastroenterology.

The success of our products is enhanced by the extensive experience of our management team in the healthcare industry, our experienced direct sales force and distributors, our ability to provide custom procedural solutions such as kits, trays

2

Table of Contents

and procedural packs at the request of our customers, and our dedication to offering facility-unique solutions in the markets we serve worldwide.

We conduct our business through two operating segments: cardiovascular (which includes peripheral intervention, cardiac intervention, custom procedural solutions, and original equipment manufacturer (“OEM”)) and endoscopy. For information relating to our operating segments and product categories, see Note 13 to our consolidated financial statements set forth in Item 8 of this report and Management’s Discussion and Analysis set forth in Item 7 of this report.

​

The following sections describe our principal product offerings by reporting segment and product category.

​

Cardiovascular

We offer a broad line of medical devices used to gain and maintain vascular access. These products include our micropuncture kits, angiographic needles, our family of Prelude® sheath introducers and a wide range of guide wires and safety products. Our cardiovascular segment includes the following product categories: peripheral intervention, cardiac intervention, custom procedural solutions, and OEM.

​

Peripheral Intervention

Our peripheral intervention products support the minimally invasive diagnosis and treatment of diseases in peripheral vessels and organs throughout the body, excluding the heart. Products in our peripheral intervention product category are organized into the following product groups: peripheral intervention, spine, and oncology.

​

Merit Vascular - Peripheral

​

Our peripheral intervention products include product offerings in the following product portfolios: access (peripheral), angiography, drainage, delivery systems, embolotherapy, and intervention (peripheral). The principal product offerings in our access (peripheral) portfolio include our:

​

​

The products in our angiography portfolio are used to identify blockages and other disease states in the blood vessel. The principal product offerings in our angiography portfolio include our:

​

3

Table of Contents

We offer a broad line of drainage products. The principal product offerings in our drainage portfolio include our:

​

​

The principal product offerings in our delivery systems portfolio include our:

​

​

Our embolotherapy products treat disease by blocking or slowing the flow of blood into the arteries or delivering chemotherapy drugs in the treatment of primary and metastatic liver cancer. The principal product offerings in our embolotherapy portfolio include our:

​

​

The products in our intervention (peripheral) portfolio are chiefly used to remove blood clots, retrieve foreign bodies in blood vessels and assist with placing balloons and stents to treat arterial disease. The principal product offerings in our intervention (peripheral) portfolio include our:

​

​

Merit Spine

Our spine products are used in the treatment of vertebral compression fractures and metastatic spinal tumors and in musculoskeletal biopsy procedures. Our spine product line includes the following product portfolios: vertebral

4

Table of Contents

augmentation, radiofrequency ablation, and bone biopsy systems. Our primary product offerings in the vertebral augmentation and radiofrequency ablation portfolios include our:

​

​

The bone biopsy systems portfolio contains a full offering of manual bone biopsy products, including our Madison™, Huntington™, Kensington™, Preston™ and Westbrook™ biopsy products.

Merit Oncology

Our oncology products are dedicated to the accurate diagnosis and localization of breast and soft tissue tumors and the innovative treatment of early-stage breast cancer. We also offer an extensive line of soft tissue biopsy products and accessories. Our primary product offerings in our oncology portfolio include our:

​

​

Cardiac Intervention

​

We manufacture and sell a variety of products designed to treat various heart conditions. Products in our cardiac intervention product category are organized into the following product portfolios: access (cardiac), angiography, electrophysiology and CRM, fluid management, hemodynamic monitoring, hemostasis, and intervention (cardiac).

​

Merit Vascular - Cardiac

​

The principal product offerings in our access portfolio (cardiac) include our family of Prelude® Introducer Sheaths, for both radial and femoral access, featuring our Prelude IDeal™ Hydrophilic Sheath Introducer, an ultra-thin wall introducer sheath that provides more room for the insertion of catheters and other devices in the radial artery.

​

The principal product offerings in our angiography portfolio include our InQwire® Guide Wires and Performa® Diagnostic and Ultimate™ catheters for femoral and radial procedures.

​

Electrophysiology is the study of diagnosing and treating abnormal electrical activities of the heart. Cardiac rhythm management (“CRM”) is the field of cardiac disease therapy that relates to the diagnosis and treatment of cardiac arrhythmias or the improper beating of the heart. The principal product offerings in our electrophysiology and CRM portfolio include our:

​

5

Table of Contents

The product offerings in our fluid management portfolio include manifolds, control syringes and tubing.

​

The principal product offerings in our hemostasis portfolio include our Prelude SYNC EVO™ and PreludeSYNC Distal™ Radial Compression devices, designed to reduce and stop blood flow after radial access procedures, and the SafeGuard® Pressure Assisted Device which provides hemostasis after femoral procedures.

​

The principal product offerings in our intervention (cardiac) portfolio include a full line of inflation devices and hemostasis valves, including the BasixCompak™, basixTOUCH™, Blue Diamond™ and DiamondTouch™ inflation devices and the PhD™ Hemostasis Valve, the latest addition to our hemostasis valve portfolio.

​

Custom Procedural Solutions

​

Our custom procedural solutions product category is comprised of standard and custom kit and pack solutions that include items needed for peripheral procedures, safety and waste management products, and hemostasis accessories. Our kit and pack solutions can optimize efficiency and reduce cost and waste. The principal product offerings in this product category include:

​

​

The Cultura™ swab and collection system (including vials with viral transport media) was introduced in May 2020 in response to the COVID-19 pandemic. Demand for and revenue from the Cultura swab appear to have peaked in 2020. Because this product was introduced to address demand for swabs used to test for COVID-19 and that demand has now significantly decreased, we have seen a significant drop in sales of this product and are no longer actively promoting it.

​

OEM

​

We provide coating services for medical tubes and wires under OEM brands in addition to many of the products identified above. We offer coated tubes and wires to customers on a spool or as further manufactured components including guide wire components, coated mandrels/stylets and coated needles.

​

We also manufacture and sell sensor components for microelectromechanical systems. These components consist of piezoresistive pressure sensors in various forms, including bare silicon die, die mounted on ceramic substrates, and fully calibrated components for numerous applications both inside and outside the healthcare industry.

​

Endoscopy

​

The products in our endoscopy operating segment, Merit Endotek™, are organized in two product portfolios: gastroenterology and pulmonary.

​

Our gastroenterology products include a complete range of innovative, gastrointestinal solutions. Our primary product offerings in our gastroenterology portfolio include our:

​

6

Table of Contents

​

Our pulmonary products consist of laser-cut tracheobronchial stents, advanced over-the-wire and direct visualization delivery systems and dilation balloons to endoscopically dilate strictures. Our primary product offerings in our pulmonary portfolio include our:

​

​

We also offer a variety of kits and accessories for endoscopy and bronchoscopy procedures.

​

Marketing and Sales

​

Target Market/Industry. Our principal target markets are peripheral intervention, cardiac intervention, interventional oncology, critical care and endoscopy. Within these markets our products are used in the following clinical areas: diagnostic and interventional cardiology; interventional radiology; neurointerventional radiology; vascular, general and thoracic surgery; electrophysiology; cardiac rhythm management; interventional pulmonology; interventional nephrology; orthopedic spine surgery; interventional oncology; pain management; breast cancer surgery; outpatient access centers; intensive care; computed tomography; ultrasound; and interventional gastroenterology.

According to statistics published by the National Center for Health Statistics, cardiovascular disease continues to be a leading cause of death and a significant health problem in the U.S. Treatment options range from dietary changes to surgery, depending on the nature of the specific disease or disorder. Endovascular techniques, including angioplasty, stenting and endoluminal stent grafts, continue to represent important therapeutic options for the treatment of vascular disease. Breast cancer is the most commonly diagnosed cancer in women and is the second leading cause of cancer death among women. We derive a large percentage of our revenues from sales of products used during percutaneous diagnostic and interventional procedures such as angiography, angioplasty and stent placement, and we intend to pursue additional sales growth by building on our existing market position in both core technology and accessory products.

Marketing Strategy. Traditionally, as part of our product sales and marketing efforts, we attend major medical conventions throughout the world pertaining to our target markets and invest in market development including physician training, peer-to-peer education, and patient outreach. Due to the various restrictions imposed in response to the COVID-19 pandemic, during 2020 and 2021 most medical conventions in which we have participated were virtual meetings. Additionally, we work closely with major healthcare facilities and physicians involving our primary target markets in the areas of training, therapy awareness programs, clinical studies and ongoing product research and development.

In general, our target markets are characterized by rapid change resulting from technological advances and scientific discoveries. We plan to continue to develop and launch innovative products to support clinical trends and to address the increasing demands of these markets.

Product Development Strategy. Our product development is focused on identifying and introducing a regular flow of profitable products that meet customer needs. To stay abreast of customer needs, we frequently seek suggestions from health care professionals working in the fields of medicine in which we offer or develop products. Suggestions for new products and product improvements may also come from engineers, marketing and sales personnel, physicians and technicians who perform clinical procedures.

When we believe that a product suggestion demonstrates a sustainable competitive advantage, meets customer needs, fits strategically and technologically with our business and has a good potential financial return, we generally assemble a “project team” comprised of individuals from our sales, marketing, engineering, manufacturing, legal and quality assurance departments. This team works to identify the customer requirements, integrate the design, compile necessary documentation and testing, and prepare the product for market introduction. We believe that one of our competitive strengths is our capacity to conceive, design, develop and introduce new products.

7

Table of Contents

U.S. and International Sales. Sales of our products in the U.S. accounted for 57%, 57% and 58% of our net sales for the years ended December 31, 2021, 2020 and 2019, respectively. In the U.S., we have a dedicated, direct sales organization primarily focused on selling to end-user physicians, hospitals and alternate site facilities (e.g., office-based labs), major buying groups and integrated healthcare networks.

Internationally, we employ sales representatives and contract with independent dealer organizations and custom procedure tray manufacturers to distribute our products worldwide, including territories in Europe, the Middle East, Africa, Asia, Oceania, Central and South America, Mexico and Canada. In 2021, our international sales grew 12.6% over our 2020 international sales and accounted for 43% of our net sales.

Our largest non-U.S. market is China, which represented 13% of our net sales in 2021 and reported net sales of $138.2 million, $113.2 million, and $113.3 million for the years ended December 31, 2021, 2020 and 2019, respectively. We maintain a distribution center and administrative office in Beijing. We also have small sales offices in Shanghai, Guangzhou, and Hong Kong. We sell our products through more than 500 distributors in mainland China, who are responsible for reselling our products, primarily to hospitals. We use the “modified direct” sales approach in China, employing sales personnel throughout China who work with our distributors to promote the clinical advantages of our products to clinicians and other decision makers at hospitals.

Beginning in 2020, we experienced a significant disruption of our business throughout the world as a result of the COVID-19 pandemic, and this disruption continued through 2021. We are unable to calculate the full impact of the COVID-19 pandemic on our business, and we are unable to predict whether we will continue to be affected by it, but we have seen a material adverse impact on our global operations and financial condition, primarily in 2020. However, in 2021, we saw significant growth in global sales compared to 2020 as the demand for our products increased when many of the medical procedures delayed from 2020 were performed and the restrictions put in place in response to the pandemic were generally reduced. For further discussion of the risks and uncertainties associated with the COVID-19 pandemic, please refer to disclosure under the heading “The COVID-19 pandemic has negatively impacted our business and operations around the world and may continue to materially and adversely impact our business, operations and financial results.” set forth in Item 1A “Risk Factors.”

In Europe, the Middle East and Africa (“EMEA), we have both direct and modified direct sales operations. Such sales operations are active throughout the region, including the largest markets in Western, Southern, Central and Eastern Europe and the emerging markets within EMEA.

Our direct sales personnel are principally engaged in each of our divisions. Marketing teams responsible for each division operate clinical education programs, often directed by leading subject matter personnel, who provide technical instruction on techniques and therapies to physicians, nurses and technologists. We are currently conducting education programs specific to radial access, spinal intervention, surgical grafts, wire-free tumor localization and electrophysiology.

We require our international dealers to store products and sell directly to customers within defined sales territories. Each of our products must be approved for sale under the laws of the country in which it is sold. International dealers are responsible for compliance with applicable anti-corruption laws, such as the U.S. Foreign Corrupt Practices Act, as well as all applicable laws and regulations in their respective countries.

We consider training to be a critical factor in the success of our sales force. Members of our sales force are trained by our clinical marketers, our staff professionals, consulting physicians, and senior field trainers in their respective territories.

OEM Sales. Our global OEM Division sells components and finished devices, including molded components, sub-assembled goods, custom kits and bulk non-sterile goods, to medical device manufacturers. These products may be combined with other components and products from other companies and sold under a Merit or customer label. Products sold by our OEM Division can be customized and enhanced to customer specifications, including packaging, labeling and a variety of physical modifications. Our OEM Division serves customers with a staff of regional sales representatives based in the U.S., Europe and Asia, and a dedicated OEM Engineering and Customer Service Group.

8

Table of Contents

Customers

We provide products to hospitals and alternate site-based physicians, technicians and nurses. Hospitals and acute care facilities in the U.S. purchase our products through our direct sales force, distributors, OEM partners, or custom procedure tray manufacturers who assemble and combine our products in custom kits and packs. Outside the U.S., hospitals and acute care facilities generally purchase our products through our direct sales force, or, in the absence of a sales force, through independent distributors or OEM partners.

Research and Development

Our research and development operations have been central to our historical growth, and we believe they will be critical to our continued growth. In recent years, our commitment to innovation led to the introduction of several new products, improvements to our existing products and expansion of our product lines, as well as enhancements and new equipment in our research and development facilities.

We continue to develop new products and make improvements to our existing products utilizing many different sources. In 2021, our Chief Executive Officer and our Executive Vice President of Global Research & Development worked closely with our sales and marketing teams to incorporate feedback from physicians and clinicians in the field, which contributed to innovative new products and improvements to our existing products.

In 2021, we completed projects that resulted in the newest additions to our product lineup: SCOUT Mini Reflector, Temno Elite™, OneVac™ Evacuated Drainage Bottle, Siege 027 and the BlueFire Infiltration System.

Currently, we have research and development facilities in California, Texas, Utah, Ireland, France, and Singapore.

Manufacturing

We manufacture many of our products using our proprietary technology and our expertise in plastic injection and insert molding. We generally contract with third parties for the tooling of our molds, but we design and own most of our molds.  We have also received various International Standards Organization (“ISO”) certifications for many of our facilities; for further details, please refer to Item 1. “Business - Sustainability” below. Merit Sensor Systems, Inc. (“Merit Sensors”) develops and markets silicon pressure sensors to a range of enterprises and presently supplies the sensors we use in our digital inflation devices and blood pressure sensors.

​

Given the specialization of our manufacturing personnel and processes in our Utah and Ireland facilities, we possess the capability to strategically shift the manufacture of more technologically advanced products to those facilities and use the manufacturing capacity of our other facilities for more commoditized products. The actual determination of manufacturing location will be based upon multiple factors, including technological capabilities, market demand, acquisition and integration activities and economic and competitive conditions.

​

We currently produce and package all of our embolic products. Manufacturing of our embolic products includes the synthesis and processing of raw materials and third-party manufactured compounds.

​

We have packaging and manufacturing facilities located in Texas, Virginia, Utah, Mexico, Brazil, Ireland, France, The Netherlands, and Singapore. See Item 2. “Properties.”

We ship our products through distribution centers located in Virginia, Utah, Canada, Brazil, The Netherlands, United Kingdom (“UK”), South Africa, Russia, South Korea, India, New Zealand, Japan, China and Australia.

​

Competition

The medical products industry is highly competitive. Many of our competitors are much larger than us and have access to greater resources. We also compete with smaller companies that sell single or limited numbers of products in specific product lines or geographies. We compete globally in several market areas, including radiology; diagnostic and

9

Table of Contents

interventional cardiology; interventional radiology; neurointerventional radiology; vascular, general and thoracic surgery; electrophysiology; cardiac rhythm management; interventional pulmonology; interventional nephrology; orthopedic spine surgery; interventional oncology; pain management; outpatient access centers; intensive care; computed tomography; ultrasound; and interventional gastroenterology.

The principal competitive factors in the markets in which our products are sold are quality, price, value, product features, customer service, breadth of line, and customer relationships. We believe our products have achieved market acceptance primarily due to the quality of materials and workmanship of our products, clinical outcomes, their innovative design, our willingness to customize our products to fit customer needs, and our prompt attention to customer requests. Some of our primary competitive strengths are our relative stability in the marketplace; a comprehensive, broad line of ancillary products; and our history of introducing a variety of new products and product line extensions to the market on a regular basis.

Our primary competitors in our peripheral intervention market are Teleflex Incorporated (“Teleflex”), Cook Medical Incorporated (“Cook Medical”), Medtronic plc (“Medtronic”), Boston Scientific Corporation (“Boston Scientific”), and Becton, Dickinson and Company (“BD”). Our primary competitors in our cardiac intervention market are BD, Teleflex, Medtronic, Abbott Laboratories, Terumo Corporation, Edwards Lifesciences Corporation, Cook Medical, and Boston Scientific. Our primary competitors in our spine market are Medtronic, Stryker Corporation, and Johnson & Johnson. Our primary competitors in our oncology market are BD, Hologic, Inc., Argon Medical Devices, Inc. and Cook Medical. Our primary competitors in our endoscopy market are Getinge AB, Boston Scientific, Cook Medical, and Olympus Corporation.

Based on available industry data, with respect to the number of procedures performed, we believe we are a leading provider of digital inflation technology in the world. In addition, we believe we are one of the market leaders in the U.S. for analog inflation devices. We believe we are a market leader in the U.S. for control syringes, radar localization, waste-disposal systems, embolic beads, tubing and manifolds. Although we believe our recent and planned additions to these product lines will help us compete even more effectively in both the U.S. and international markets, we cannot give any assurance that we will be able to maintain our existing competitive advantages or compete successfully in the future.

Sources and Availability of Raw Materials

Raw materials essential to our business are generally purchased worldwide and are normally available in quantities adequate to meet the needs of our business. Where there are exceptions, the temporary unavailability of those raw materials has not historically had a material adverse effect on our financial results; however, current fluctuations and uncertainties in supply chain, transportation logistics, and freight expenses could result in disruptions in our operations and materially impact our financial results.

Proprietary Rights and Litigation

We rely on a combination of patents, trade secrets, trademarks, copyrights and confidentiality agreements to protect our intellectual property. We have a number of U.S. and foreign-issued patents and pending patent applications, including rights to patents and patent applications acquired through strategic transactions, which relate to various aspects of our products and technology. The duration of our patents is determined by the laws of the country of issuance and, for the U.S., is typically 20 years from the date of filing of the patent application. As of December 31, 2021, we owned approximately 1,600 U.S. and international patents and patent applications. This number decreased in 2021 because we abandoned certain patents that were expected to expire before we could obtain regulatory approval and commercialize the related products. As a result, we were able to avoid paying the significant annuities and maintenance and prosecution fees required to keep those patents alive.

​

Additionally, we hold exclusive and non-exclusive licenses to a variety of third-party technologies covered by patents and patent applications. In the aggregate, our intellectual property assets are critical to our business, but no single patent, trademark or other intellectual property asset is of material importance to our business.

​

10

Table of Contents

The Merit® name and logo are trademarks in the U.S. and other countries. In addition to the Merit name and logo, we have used, registered or applied for registration of other specific trademarks and service marks to help distinguish our products, technologies and services from those of our competitors in the U.S. and foreign countries. See Item 1. “Business - Products” above. The duration of our trademark registrations varies from country to country; in the U.S. we can generally maintain our trademark rights and renew any trademark registrations for as long as the trademarks are in use. As of December 31, 2021, we owned approximately 650 U.S. and foreign trademark registrations and trademark applications. We increased our trademark applications in 2021 in an effort to protect our trademark rights in jurisdictions outside the U.S.

​

There is substantial litigation regarding patents and other intellectual property rights in the medical device industry. At any given time, we may be involved as either a plaintiff or a defendant, as well as a counter-claimant or counter-defendant, in patent, trademark, and other intellectual property infringement actions. If a court rules against us in any intellectual property litigation we could be subject to significant liabilities, be forced to seek licenses from third parties, or be prevented from marketing certain products. In addition, intellectual property litigation is costly and may consume significant time of employees and management.

​

Regulation

​

Corporate Integrity Agreement. In October 2020, we entered into a Corporate Integrity Agreement (“CIA”) with the Office of Inspector General (“OIG”), a five-year agreement that was a condition of our settlement with the United States Department of Justice (“DOJ”). The CIA subjects us to certain compliance, monitoring, reporting, certification, oversight and training obligations. The CIA requires, among other matters, that we (i) maintain a compliance officer, a compliance committee, board review and oversight of certain federal healthcare compliance matters and compliance and disclosure programs; (ii) establish compliance policies and procedures to meet the requirements of all federal health care programs and the U.S. Food and Drug Administration (“FDA”); (iii) provide management certifications and compliance training and education; (iv) engage an independent review organization to conduct a thorough review of our systems, policies, processes and procedures related to promotional materials, product evaluations, consulting agreements, trainings provided to healthcare professionals, sponsorships, grants and charitable contributions; (v) implement a risk assessment and internal review process; (vi) establish a disclosure program for whistleblowers; (vii) increase oversight of the interactions between our sales personnel and healthcare providers; and (viii) report or disclose certain events and physician payments. We recently completed our first reporting year under the CIA and are in the process of implementing certain recommendations made by the independent review organization.  

​

Our failure to comply with our obligations under the CIA could result in monetary penalties and our exclusion from participation in federal health care programs.

​

The foregoing description of the CIA is qualified in their entirety by the full terms of the CIA, which is attached as Exhibit 10.46  hereto and incorporated herein by reference.

​

Regulatory Approvals. Our products and operations are global and are subject to regulations by the FDA and various other federal and state agencies, as well as by foreign governmental agencies. These agencies enforce laws and regulations that control the design, development, testing, clinical trials, manufacturing, labeling, storage, advertising, marketing, distribution, and post-market surveillance of our medical products.

​

The time required to obtain approval by the FDA and other foreign governmental agencies can be lengthy and the requirements may differ. In particular, in May 2017, the EU adopted Regulation (EU) 2017/745 (“MDR”), which replaced Council Directive 93/92/EEC (“MDD”) as of May 26, 2021. Under transitional provisions, medical devices with notified body certificates issued under the MDD prior to May 26, 2021 may continue to be placed on the market for the remaining validity of the certificate or until May 26, 2024, whichever is first. After the expiry of any applicable transitional period, only devices that have been CE marked under the MDR may be placed on the market in the EU. We are preparing to comply with these new regulations before the transitional period expires. However, there will be products that we will instead choose to discontinue or postpone introduction in the EU. This decision will depend on a number of factors, including changing business strategies, timing and cost of obtaining MDR certification, availability of necessary data and the capacity of Notified Bodies. The MDR includes increasingly stringent requirements in multiple areas, such as pre-

11

Table of Contents

market clinical evidence, review of high-risk devices, labeling and post-market surveillance. Under the MDR, pre-market clinical data will now be required to obtain CE Mark approval for high-risk, new and modified medical devices.

​

U.S. and global counter-part regulatory approval processes for medical devices are expensive, uncertain and lengthy. There can be no assurance that we will be able to obtain necessary regulatory approvals for any product on a timely basis or at all. Delays in receipt of or failure to receive such approvals, the loss of previously received approvals, or the failure to comply with existing or future regulatory requirements could have a material adverse effect on our business, financial condition or results of operations.

​

In May 2020, we received the CE mark for the Merit Wrapsody Endoprosthesis, and we are pursuing regulatory approval in the U.S. and elsewhere. We are conducting a large, multinational pivotal human clinical trial of the Wrapsody Endoprosthesis, which is required for us to obtain approval from the FDA and some international regulatory agencies. Human clinical trials of a medical device are often required for regulatory clearance or approval for devices and are expensive, time-consuming and uncertain.

​

Quality System Requirements. The Federal Food, Drug and Cosmetic Act (“FDCA”) and its counterpart non-U.S. laws require us to comply with quality system regulations (“QSR”) pertaining to all aspects of our product design and manufacturing processes, including requirements for packaging, labeling, record keeping, personnel training, supplier controls, design controls, complaint handling, corrective and preventive actions and internal quality system auditing. The FDA and foreign regulators enforce these requirements through periodic inspections of medical device manufacturers. These requirements are complex, technical and require substantial resources to remain compliant. Our failure or the failure of our suppliers to maintain compliance with these requirements could result in the shutdown of our manufacturing operations or the recall of our products, or could restrict our ability to obtain new product approvals or certificates from the FDA that are necessary for export of our products to foreign countries. Any of these results could have a material adverse effect on our business. If one of our suppliers fails to maintain compliance with our quality requirements, we may have to qualify a new supplier and could experience manufacturing delays as a result. We also could be subject to injunctions, product seizures, or civil or criminal penalties.

Labeling and Promotion. Our labeling and promotional activities are also subject to scrutiny by the FDA and foreign regulators. Labeling includes not only the label on a device, but also includes any descriptive or informational literature that accompanies or is used to promote the device. Among other things, labeling violates the law if it is false or misleading in any respect or it fails to contain adequate directions for use. Moreover, product claims that are outside the approved or cleared labeling violate the FDCA and other applicable laws. If the FDA determines that our promotional materials constitute promotion of an uncleared or unapproved use, or otherwise violate the FDCA, it could request that we modify our promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a notice of violation, a warning letter, injunction, seizure, civil fines or criminal penalties. Allegations of off-label promotion can also result in enforcement action by federal, state, or foreign enforcement authorities and trigger significant civil or criminal penalties, including exclusion from the Medicare and Medicaid programs and liability under the False Claims Act, discussed further below.

Our product promotion is also subject to regulation by the Federal Trade Commission (the “FTC”), which has primary oversight of the advertising of unrestricted devices, including FDA-cleared devices. The Federal Trade Commission Act prohibits unfair methods of competition and unfair or deceptive acts or practices in or affecting commerce, as well as unfair or deceptive practices such as the dissemination of any false or misleading advertisement pertaining to medical devices. FTC enforcement can result in orders requiring, among other things, limits on advertising, corrective advertising, consumer redress, rescission of contracts and such other relief as the FTC may deem necessary.

In addition, under the federal Lanham Act and similar state laws, competitors and others can initiate litigation relating to advertising claims.

Import Requirements. To import a medical device into the U.S., the importer must file an entry notice and bond with the U.S. Bureau of Customs and Border Protection (“CBP”). All devices are subject to FDA examination before release from the CBP. Any article that appears to be in violation of the FDCA may be refused admission and a notice of detention and hearing may be issued. If the FDA ultimately refuses admission, the CBP may issue a notice for redelivery and assess

12

Table of Contents

liquidated damages for up to three times the value of the lot. Additionally, the laws of the U.S. require imported articles to have their labels accurately marked with the appropriate country of origin, the violation of which may result in confiscation, fines and penalties.

Export Requirements. Products for export are subject to foreign countries’ import requirements and the exporting requirements of the exporting countries’ regulating bodies, as applicable. International sales of medical devices manufactured in the U.S. that are not approved or cleared by the FDA for use in the U.S., or are banned or deviate from lawful performance standards, are subject to FDA export requirements and we may not be able to export such products.

Foreign countries often require, among other things, an FDA certificate for products for export, also called a Certificate to Foreign Government. To obtain this certificate from the FDA, the device manufacturer must apply to the FDA. The FDA certifies that the product has been granted clearance or approval in the U.S. and that the manufacturing facilities were in compliance with the QSR at the time of the last FDA inspection.

Additionally, the export of our products is subject to restrictions due to trade and economic sanctions imposed by the U.S., the EU and other governments and organizations. The U.S. Departments of Justice, Commerce, State and Treasury and other federal agencies and authorities have a broad range of civil and criminal penalties they may seek to impose against corporations and individuals for violations of economic sanctions laws, export control laws, and other federal statutes and regulations, including those established by the Office of Foreign Assets Control (“OFAC”). Under these laws and regulations, as well as other export control laws, customs laws, sanctions laws and other laws governing our operations, various government agencies may require export licenses and may seek to impose modifications to business practices, including cessation of business activities in sanctioned countries or with sanctioned persons or entities. With the U.S. and other countries exploring export sanctions in response to military exercises and escalating tensions in certain parts of the world, any such export restrictions may affect the company’s business in certain regions of the world.

Additional Post-Market Requirements. As a medical device manufacturer, we are subject to other post-market requirements in multiple jurisdictions, including (i) product listing, (ii) establishment registration, (iii) Unique Device Identification (“UDI”), and (iv) reports of corrections and removals. We are also subject to regulations that require manufacturers to report to the FDA, or an equivalent foreign regulatory body, any incident in which their device may have caused or contributed to a death or serious injury, or has malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction of the device or a similar device were to recur. Our obligation to report a complaint is triggered on the date on which we become aware of an adverse event and the nature of the event. The FDA also regularly inspects companies to determine compliance with the QSRs and other post-market requirements. Please refer to our discussion of the risks and uncertainties associated with these post-market requirements under the heading “Our products may cause or contribute to adverse medical events that we are required to report to the FDA or other governmental authorities, and if we fail to do so, we may be subject to sanctions that may materially harm our business.” set forth in Item 1A “Risk Factors.”

Reimbursement. Our products are generally used in medical procedures that are covered and reimbursed by governmental payers, such as Medicare, and/or private health plans. In general, these third-party payers cover a medical device and/or related procedure in which the device is used only when the payer determines that healthcare outcomes are supported by medical evidence and the device and procedure is medically necessary for the diagnosis or treatment of the patient’s illness or injury. Even if a device has received clearance or approval for marketing by the FDA or, for uses outside of the U.S., a similar foreign regulatory agency, there is no certainty that third-party payers will cover and reimburse for the cost of the device and/or related procedures involving the use of the device. Because of increasing cost-containment pressures, some private payers in the U.S. and government payers in foreign countries may also condition payment on the cost-effectiveness of the device and/or procedure. Even if coverage is available, third-party payers may place restrictions on the circumstances in which they provide coverage or may offer reimbursement that is not sufficient to cover the cost of our products. If healthcare providers such as hospitals and physicians cannot obtain adequate coverage and reimbursement for our products or the procedures in which they are used, this may affect demand for our products and our business, financial condition, results of operations, or cash flows could suffer a material adverse impact.

Anti-Corruption Laws. Our international operations are subject to the Foreign Corrupt Practices Act (the “FCPA”), the U.K. Bribery Act and other foreign anti-corruption laws. The FCPA prohibits offering, paying, or promising to pay

13

Table of Contents

anything of value to foreign officials for the purpose of obtaining or maintaining an improper business advantage. The FCPA also requires that we maintain fair and accurate books and records and devise and maintain an adequate system of internal accounting controls. In certain countries, the individuals and entities that we regularly interact with may meet the definition of a foreign government official for purposes of the FCPA. As part of our compliance program, we train our U.S. and international employees, and we also train and monitor foreign third parties with whom we contract (e.g., distributors), to comply with the FCPA and other anti-corruption laws. Failing to comply with the FCPA or any other anti-corruption law could result in fines, penalties or other adverse consequences.

As we expand our international operations, we continue to increase the scope of our compliance programs to match the risks relating to the potential for violations of the FCPA and other anti-corruption laws. Our compliance program includes (i) policies addressing not only the FCPA, but also the provisions of a variety of anti-corruption laws in multiple foreign jurisdictions, (ii) provisions relating to books and records that apply to us as a public company, and (iii) effective training for our personnel and relevant third parties.

Transparency Laws. The U.S. Physician Payment Sunshine Act, and similar state laws, also include annual reporting and disclosure requirements for device manufacturers aimed at increasing the transparency of the interactions between device manufacturers and healthcare providers. Reports submitted under these new requirements are placed in a public database. Several other jurisdictions outside the U.S. have also adopted or begun adopting similar transparency laws. In addition to the burden of establishing processes for compliance, if we fail to provide these reports, or if the reports we provide are not accurate, we could be subject to significant penalties.

Anti-Kickback Statutes. The federal Anti-Kickback Statute prohibits persons and entities from, among other things, knowingly and willfully offering or paying remuneration, directly or indirectly, to induce the purchase, order, lease, or recommendation of a good or service for which payment may be made in whole or part under a federal healthcare program such as Medicare or Medicaid, unless the arrangement fits within one of several statutory exemptions or regulatory “safe harbors.” The definition of remuneration has been broadly interpreted to include anything of value, including, for example, gifts, discounts, the furnishing of supplies or equipment, credit arrangements, payments of cash and waivers of payments. Violations can result in significant penalties, imprisonment and exclusion from Medicare, Medicaid and other federal healthcare programs. Exclusion of a manufacturer would preclude any federal healthcare program from paying for the manufacturer’s products. Under the Affordable Care Act, a violation of the Anti-Kickback Statute is deemed to be a violation of the False Claims Act, which is discussed in more detail below. A party’s failure to fully satisfy the obligations of a regulatory “safe harbor” provision may result in increased scrutiny by government enforcement authorities.

In addition to the federal Anti-Kickback Statute, many states have their own anti-kickback laws. Often, these laws closely follow the language of the federal law, although they do not always have the same exceptions or safe harbors. In some states, these anti-kickback laws apply with respect to all payers, including commercial health insurance companies.

Government officials continue their vigorous enforcement efforts on the sales and marketing activities of pharmaceutical, medical device and other healthcare companies, including the pursuit of cases against individuals or entities that allegedly offered unlawful inducements to potential or existing customers to procure their business. Settlements of these government cases have involved significant fines and penalties and, in some instances, criminal proceedings.

False Claims Laws. The False Claims Acts prohibit any person from knowingly presenting, or causing to be presented, a false claim for payment to the federal government or knowingly making, or causing to be made, a false statement to get a claim paid. The Civil False Claims Act can be violated without actual knowledge and only requires reckless disregard or deliberate ignorance, while the Criminal False Claims Act requires a higher knowledge standard of actual knowledge and intent to violate. Manufacturers can be held liable under the False Claims Acts, even if they do not submit claims to the government, if they are found to have caused the submission of false claims (e.g., by third parties such as healthcare providers). The Civil False Claims Act also includes whistleblower provisions that allow private citizens to bring suit against an entity or individual on behalf of the U.S. and to recover a portion of any monetary recovery. Many of the recent, highly publicized settlements in the healthcare industry relating to sales and marketing practices have been cases brought under the Civil False Claims Act. Most states also have adopted statutes or regulations similar to the federal laws, which apply to items and services reimbursed under Medicaid and other state programs. Sanctions under the federal False Claims Acts and similar state laws may include civil monetary penalties, treble damages, criminal fines and/or imprisonment.

14

Table of Contents

Labor Standards Laws. We are also subject to corporate social responsibility (“CSR”) laws and regulations which require us to monitor the labor standards in our supply chain, including the California Transparency in Supply Chains Act, the UK Modern Slavery Act, and U.S. Federal Acquisition Regulations regarding Combating Trafficking in Persons. These CSR laws and regulations may impose additional processes and supplier management systems and have led certain key customers to impose additional requirements on medical device companies, including audits, as a prerequisite to selling products to such customers, which could result in increased costs for our products, the termination or suspension of certain suppliers, and reductions in our margins and profitability.

Privacy and Security. The Health Insurance Portability and Accountability Act of 1996 (“HIPAA”), the Health Information Technology for Economic and Clinical Health Act (the “HITECH Act”), and accompanying rules, require certain entities, referred to as “covered entities” (including most healthcare providers and health plans), to comply with established standards, including standards regarding the privacy and security of protected health information (“PHI”). Many state laws also regulate the use and disclosure of health information and require notification in the event of a breach of such information.

The EU has adopted a single EU privacy regulation, the General Data Protection Regulation (“GDPR”). The GDPR can have an extraterritorial scope and, in particular, applies to the processing of personal data in the context of the activities of an establishment of a company (controller or a processor) in the EU, regardless of whether the processing takes place in the EU or not. In addition, it applies to the processing of personal data of data subjects who are in the EU by a controller or processor not established in the EU, where the processing activities are related to: (a) the offering of goods or services, irrespective of whether a payment of the data subject is required, to such data subjects in the EU; or (b) the monitoring of their behavior as far as their behavior takes place within the EU. The GDPR provides for a harmonization of the data protection regulations throughout the EU. It imposes a strict data protection compliance regime with severe penalties of up to the greater of 4% of the total worldwide annual turnover of the preceding financial year or €20 million (whichever is higher) and includes new rights such as the “portability” of personal data. Although the GDPR applies across the EU without a need for local implementing legislation, it contains a number of opener clauses enabling the EU Member States to provide for additional legislation. In addition, local data protection authorities still have the ability to interpret the GDPR, which has the potential to create inconsistencies on a country-by-country basis. We have implemented changes to our business practices to comply with the GDPR.

As a consequence of Brexit, the GDPR no longer directly applies in the UK. However, the UK Data Protection Act 2018 remains in force, which incorporates the GDPR into UK legislation with some minor amendments to take account of the UK's departure from the EU. Thus, we remain subject to the applicable provisions of the GDPR in the UK.

The People’s Republic of China has introduced a comprehensive personal information protection regime by establishing a unified, cross-sector legislation, as the EU does with the GDPR. This legislation, called the Personal Information Protection Law (“PIPL”), went into effect on November 1, 2021, and has many aspects that are similar to the GDPR. The PIPL sets rules for the processing activities such as collection, use, sharing, transfer, and disclosure of personal information in China. It also applies to the personal information processing activities outside of China if relevant business operators (a) aim at providing products or services to individuals in China; or (b) engage in analyzing and evaluating the behavior of individuals in China. Among others, the PIPL requires companies as personal information processors (which can be viewed as equivalent to data controllers under the GDPR) to obtain informed consents from the data subjects for the processing activities of their personal information, and separate consents under certain circumstances such as cross-border transfer of personal information. The PIPL also requires storage of personal information locally in China if the company is certified as a critical information infrastructure operator (“CIIO”) or processing personal information exceeding a certain volume threshold. Further, the PIPL grants statutory rights to data subjects, such as the right to information, the right to withdraw consents, the right of data portability, and the right to refuse automated decision-making. In addition, the PIPL also imposes a number of new administrative requirements on the personal information processors, including, among others, designating a data protection officer if certain conditions are met, signing data processing agreements with entrusted processors (which can be viewed as equivalent to data processors under the GDPR), preparing data breach notices, conducting a personal information impact assessment as required, and obtaining regulatory approval for certain cross-border data transfer activities. Violations of the PIPL may incur severe penalties, including a fine of up to RMB 50 million or 5% of the company's annual turnover in the preceding year, revocation of the company’s license to do business in China, and personal liabilities for company executives. As the PIPL is new and relevant implementation rules are to be finalized

15

Table of Contents

and released, we are in the process of implementing changes to our business practices to comply with the PIPL while monitoring further developments in the law.

We post on our websites our privacy notices, policies and practices regarding the collection, use and disclosure of user data. Any failure, or perceived failure, by us to comply with our posted privacy notices or policies or with any applicable regulatory requirements or orders, or privacy, data protection, information security or consumer protection-related privacy laws and regulations in one or more jurisdictions could result in proceedings or actions against us by governmental entities or others, including class action privacy litigation in certain jurisdictions, subject us to significant fines, penalties, judgments and negative publicity, require us to change our business practices, increase the costs and complexity of compliance, and adversely affect our business. Data protection, privacy and information security have become the subject of increasing public, media and legislative concern. For example, California’s Consumer Protection Act went into effect on January 1, 2020, giving consumers the right to demand certain information and actions from companies who collect personal information. This enhanced scrutiny and legal requirements could result in costly compliance efforts and potentially result in fines, harm to reputation, or other consequences. If our customers were to reduce their use of our products and services as a result of these concerns, our business could be materially harmed. As noted above, we are also subject to the possibility of security and privacy breaches, which themselves may result in a violation of these privacy laws.

CARES Act. On March 27, 2020, the Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) was signed into law. The $2.2 trillion economic stimulus bill contains numerous tax law changes. The CARES Act established a program with provisions to allow U.S. companies to defer the employer’s portion of social security taxes between March 27, 2020 and December 31, 2020 and pay such taxes in two installments in 2021 and 2022. As permitted by the CARES Act we have deferred payment of the employer’s portion of social security payroll tax payments and made a payment equal to one half of the deferred amount during the year ended December 31, 2021.

Seasonality

Our worldwide sales have not historically reflected a significant degree of seasonality; however, customer purchases have historically been lower during the third quarter of the year, as compared to other quarters. This reflects, among other factors, lower demand during summer months in countries in the northern hemisphere.

Sustainability

In recent years, the sustainability of our business has become a key focus of our management team. Under the oversight of our Board of Directors, we have created a cross-functional Corporate Sustainability Council that is driving long-term Environment, Social and Governance (“ESG”) goals across our enterprise. These efforts have included proactive actions to address both risks and opportunities related to our sustainability program, as we strive for continued growth and profitability.

The majority of our products are disposable medical devices and are generally disposed of after a single use due primarily to the risks of exposing patients to bloodborne pathogens capable of transmitting disease or other potentially infectious materials. Additionally, repeated sterilization to address such risks is not possible because it may adversely affect the quality of the materials used in many of our products and result in the failure of our product to function properly if used in multiple medical procedures. Consequently, many of our used products will likely end up in a medical waste disposal facility at the end of their usefulness. We continue to look for opportunities to deliver sustainable, long-term growth of our business. Our sustainability practices are an integral component of our business strategy, and our sustainability activities are reviewed and approved by senior management and our Board of Directors.

16

Table of Contents

By assessing our sustainability opportunities, we have developed areas of focus where we are positioned to make a positive impact. These include programs designed to reduce waste, improve efficiency, reduce greenhouse gas emissions, and protect the environment. Our sustainability values in action include:

​

​

To learn more about our sustainability programs and accomplishments, you may visit www.merit.com/about/corporate-sustainability/; however, the information on this website is not, and will not be deemed, a part of this report or incorporated into any other filings we make with the SEC.

​

Human Capital Management

​

As of December 31, 2021, we had 6,446 employees located in approximately 40 different countries in a variety of different roles. In the highly competitive medical device industry, we consider attracting, developing, and retaining talented people in technical, operational, marketing, sales, research, management, and other positions to be critical to our overall long-term growth strategy. Our ability to recruit and retain such talent depends on several factors, including compensation and benefits, talent development, career opportunities, and work environment. We invest in our people and cultivate a company culture committed to supporting a diverse and inclusive workforce.

17

Table of Contents

​

Diversity and Inclusion. Our goal is to create a diverse and inclusive global culture that reflects the diversity of the customers we serve and encourages an environment where employees feel welcomed, respected, and valued. With this goal in mind, in late 2020 the Company hired its first Chief Human Resources Officer who, in part, has been charged with working with our leadership team to strengthen and enhance our diversity and inclusion efforts company wide. We are committed to providing equal opportunity in all aspects of employment. In the U.S., we are an equal opportunity/affirmative action employer committed to making employment decisions without regard to race, religion, ethnicity or national origin, gender, sexual orientation, gender identity or expression, age, disability, protected veteran status or any other characteristics protected by law. Over 50% of our U.S. employee population identifies as non-white. To further promote a culture of inclusion, during 2021 we started the Women’s Leadership Initiative (“WLI”), our first ever affinity group led by women and open to all Merit employees. The WLI contributes to our long-term strategies by promoting a culture of diversity, equity and inclusion through (i) sponsoring professional development activities focused on overcoming barriers and restraints to the advancement of women’s careers, (ii) facilitating external interactions with organizations and thought leaders, and (iii) providing resources focused on improving diversity, equity, and inclusion.

Employee Engagement. The engagement of our workforce is critical to delivering on our competitive strategy, and we place high importance on informed and engaged employees. We communicate frequently with our employees through a variety of communication methods, including video and written communications, town hall meetings, and our company intranet, and we acknowledge individual contributions to Merit by celebrating milestones of service in five-year increments. As a result of the COVID-19 pandemic, we strengthened our communication platforms. Our employee communications during the pandemic have kept our employees informed on critical priorities, important actions being taken by management in response to the pandemic, and continued efforts to protect employee health, safety and well-being. In addition, the human resource team expanded with the hiring of a Senior Director of Internal Communications, to specifically focus on improving employee communications.

​

Compensation and Benefits. Because our mission is to create innovative medical devices that improve lives, we aim to hire and develop employees who want to build something special through hard work, team effort, and commitment. That is why we provide all our employees with competitive benefit packages and strive to provide the most cost-effective medical benefits and wellness programs. As a result of our focus on competitive health and wellness benefits, we have achieved our seventh consecutive year of zero health care plan cost increases for our U.S. employees who participate in our group healthcare plans. Our benefits include competitive pay, annual incentive awards and bonus opportunities, healthcare and retirement benefits, an Employee Stock Purchase Plan, paid time off and sick leave, paid parental leave, flexible work schedules, remote working opportunities, and a wellness program.

​

Talent Development. In 2021, we hired our first ever Vice President of Global HR Operations to focus on global programs around employee performance, development and engagement. To improve employee performance, we have begun building out a global performance management program which will be officially launched in 2023 alongside our new human resources information system. Employee development programs are being executed at different regional and local levels with a focus on management and leadership development. 

​

We have also invested time and resources to strengthen employee engagement. For example, we have partnered with Gallup, a global research and worldwide leader on the topic of engagement, to support efforts in understanding our employee sentiment worldwide. To accomplish this, we are developing a program for surveying employees on a regular basis and creating manager action plans based on the feedback of those surveys.

​

Community. Our employees are actively involved in their communities and supporting causes. At our headquarters, we provide an onsite garden where employees take part in growing and distributing produce to employees and to the local community. Employees also actively support causes by raising awareness and funds for non-profit organizations. Areas that our employees have supported in recent years include Breast Cancer Awareness Month, Heart Health Month, children’s charities and supporting those in need. In 2021, we resumed our support of humanitarian missions and medical education conferences, albeit in a limited fashion considering restrictions imposed in light of the COVID-19 pandemic. We were able to partner with the Heineman-Robicsek Medical Outreach group to provide critical products to support its medical mission to Belize. As the world continues to move forward considering the new normal presented by the COVID-

18

Table of Contents

19 pandemic, we are anxious to resume our historical volume of support for bringing healthcare to underserved areas of the globe.

​

Wellness. Wellness is at the foundation of creating a positive employee experience. At our company headquarters in Utah, we have an onsite medical clinic available for our employees and their families where we provide preventative and general medical care. The clinic also currently provides employees with COVID-19 vaccination shots, boosters, and testing. In addition, we have a Chief Wellness Officer dedicated to designing programs and initiatives that support the physical, emotional, and mental health of our employees. This year, we launched a wellness committee and created a “Get Healthy” wellness program available to all sites across the globe. Programs include providing health information from health and nutrition experts, newsletters with wellness and nutrition tips, and activities promoting health and wellbeing such as walking groups. Some programs include suicide prevention awareness, on-site diabetes screenings, immunizations, lifestyle modification to prevent diseases, tobacco cessation, breast cancer awareness, and our Smart Choice meal program designed by our onsite nutritionist and chef to provide free heart healthy meals to employees in our Utah headquarters.

​

COVID-19 Response; Health and Safety. During the COVID-19 pandemic, the majority of our manufacturing employees have continued to work from our facilities, where we have adopted health screening, implemented social distancing and personal protective equipment requirements, enhanced food service, cleaning and sanitation procedures, and modified workspaces to reduce the potential for disease transmission, and implemented a COVID-19 vaccine mandate for our U.S. employees. Most employees who do not require access to our facility to perform their work have been working from home during the pandemic, without a significant impact to productivity.

​

Information Security

We maintain strong cybersecurity systems to guard against unauthorized access, malicious software, corruption of data, disruption of our networks and systems and unauthorized release of confidential information. We employ an experienced and dedicated information security team, follow industry best practices, and work with our employees globally to create awareness and mitigate cyber risk. On an ongoing basis, we assess risks and implement procedures and practices designed to improve the security, confidentiality, integrity and availability of our systems. We voluntarily engage third-party security auditors to test our systems and controls at least annually against the most widely recognized security standards and regulations. We have developed and continue to implement a continuing cyber awareness training program which is designed to increase awareness of cybersecurity threats throughout our company and reduce the risk of human error. We conduct periodic phishing testing on all our employees with e-mail access and emphasize information security in training events and programs we host throughout the year.

We have established controls and procedures to escalate enterprise-level issues, including cybersecurity matters, to the appropriate management levels within our organization and our Board of Directors, or members or committees thereof, as appropriate. Our Board of Directors is responsible for enterprise risk management, including our approach to managing cybersecurity risk, and has delegated oversight responsibility to its Audit Committee. The Audit Committee regularly reviews information security risks and receives reports from our Chief Technology Officer and other members of the Company’s management regarding those risks. Under our framework, cybersecurity issues are analyzed by subject matter experts for potential financial, operational, and reputational risks, based on, among other factors, the nature of the matter and breadth of impact. Matters determined to present potential material impacts to the Company’s financial results, operations, and/or reputation are immediately reported by management to our Board of Directors or its Audit Committee, as appropriate, in accordance with our escalation framework. In addition, we have established procedures to ensure that management responsible for overseeing the effectiveness of disclosure controls is informed in a timely manner of known cybersecurity risks and incidents that may materially impact our operations and that timely public disclosure is made as appropriate. We maintain cyber insurance coverage that may, subject to policy terms, conditions and limitations, cover certain aspects of cybersecurity risks; however, such insurance coverage may be unavailable or insufficient to cover all losses or all types of claims that may arise in the continually evolving area of cyber risk. During the last three years, we have not experienced a material security breach and, as a result, we have not incurred any material expenses from such a breach. Furthermore, during such time, we have not been penalized or paid any amount under any information security breach settlement.

19

Table of Contents

Recent Developments

​

None.

​

Available Information

We file annual, quarterly and current reports and other information with the SEC. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The address of the SEC’s internet website is www.sec.gov.

​

Our internet address is www.merit.com. On our Investor Relations website, www.merit.com/investors, we make available, free of charge, a variety of information for investors. Our goal is to maintain the Investor Relations website as a portal through which investors can easily find or navigate to pertinent information about us, including:

​

​

Additionally, we provide electronic and paper copies of such filings free of charge upon request.

​

The information on www.merit.com is not, and will not be deemed, a part of this report or incorporated into any other filings we make with the SEC.

​

Financial Information About Foreign and Domestic Sales

For financial information relating to our foreign and domestic sales see Note 2 and Note 13 to our consolidated financial statements set forth in Item 8 of this report.

​

​

20

Table of Contents

Item 1A.Risk Factors.

Our business, operations and financial condition are subject to certain risks and uncertainties. Should one or more of these risks or uncertainties materialize, or should any underlying assumptions prove incorrect, our actual results will vary, and may vary materially, from those anticipated, estimated, projected or expected. Among the key factors that may have a direct bearing on our business, operations or financial condition are the factors identified below:

Business, Economic, Industry and Operational Risks

Changes in general economic conditions, geopolitical conditions, domestic and foreign trade policies, monetary policies and other factors beyond our control may adversely impact our business and operating results.

Our operations and performance depend significantly on global, regional and U.S. economic and geopolitical conditions. Russia’s invasion and military attacks on Ukraine have triggered significant sanctions from U.S. and European leaders. These events are currently escalating and creating increasingly volatile global economic conditions. Resulting changes in U.S. trade policy could trigger retaliatory actions by Russia, its allies and other affected countries, including China, resulting in a “trade war.” A trade war could result in increased costs for raw materials we use in our manufacturing and could result in Russia and other foreign governments imposing tariffs on products that we export outside the U.S. or otherwise limiting our ability to sell our products abroad. These increased costs would have a negative effect on our financial condition and profitability. Furthermore, if the conflict between Russia and Ukraine continues for a long period of time, or if other countries, including the U.S., become further involved in the conflict, we could face significant adverse effects to our business and financial condition.  

The United Kingdom’s (“UK”) departure from the European Union (“EU”) (commonly known as “Brexit”) has created uncertainties affecting business operations in the UK, the EU and a number of other countries, including with respect to compliance with the regulatory regimes regarding the labeling and registration of the products we sell in these markets. While we have taken proactive steps to mitigate possible disruption to our operations, we still could face increased costs, volatility in exchange rates, market instability and other risks, depending on the effects of existing and future agreements between the UK and EU regarding Brexit and the future EU/UK trading relationship.

The above factors, including a number of other economic and geopolitical factors both in the U.S. and abroad, could ultimately have material adverse effects on our business, financial condition, results of operations or cash flows, including the following:

Termination or interruption of our supply relationships and increases in labor costs and the prices of our component parts, finished products, third-party services and raw materials, particularly petroleum-based products, is negatively impacting our business and could have a further adverse effect on our business, operations or financial condition.

We rely on raw materials, component parts, finished products and third-party services in connection with our business. For example, substantially all of our products are sterilized by only a few different entities. If any of these sterilizers goes

21

Table of Contents

out of business or fails to comply with quality or regulatory requirements, we may be unable to find a suitable supplier to replace them. This could significantly delay or stop production and cause sales of such products to materially decline. Additionally, many of our products have components that are manufactured using resins, plastics and other petroleum-based materials which are available from a limited number of suppliers. We are experiencing a growing trend among suppliers of polymer resins to refuse to supply resin to the medical device manufacturers or to require such manufacturers to assume additional risks due to the potential for product liability claims. Additionally, there is no assurance that crude oil supplies will be uninterrupted or that petroleum-based manufacturing materials will be available for purchase in the future. The military conflict between Russia and Ukraine may increase the likelihood of supply interruptions and further hinder our ability to find the materials we need to make our products. Supply disruptions are making it harder for us to find favorable pricing and reliable sources for the materials we need, putting upward pressure on our costs and increasing the risk that we may be unable to acquire the materials and services we need to continue to make certain products.

The availability and price of these materials, parts, products and services are affected by a variety of factors beyond our control, including the willingness of suppliers to sell into the medical device industry, changes in supply and demand, general economic conditions, labor costs, fuel-related transportation costs, liability concerns, climate change (including new and existing laws and regulations to address climate change), competition, import duties, tariffs, currency exchange rates and political uncertainty around the world. Our suppliers often pass some of their cost increases on to us, and if such increased costs are sustained or increase further, our suppliers may pass further cost increases on to us. In addition to the effect on resin prices, transportation costs have generally increased and may further increase if crude oil prices increase. Our transportation and service providers are typically able to pass any significant increases in oil prices on to us. Our costs may also be impacted by laws to increase minimum wages, including the potential increase to the federal minimum wage in the United States that has been recently proposed by the current administration.

Our ability to recover such increased costs may depend upon our ability to raise prices on our products. Due to the highly competitive nature of the healthcare industry and the cost-containment efforts of our customers and third-party payers, we may be unable to pass along cost increases through higher prices. If we are unable to fully recover these costs through price increases or offset these increases through cost reductions, or we experience terminations or interruption of our relationships with our suppliers, we could experience lower margins and profitability, and our results of operations, financial condition and cash flows could be materially harmed.

Any damage or interruption to our facilities, infrastructure, manufacturing processes or information technology systems, or those of our suppliers, could result in lost revenues and our business could be seriously harmed.

Damage or interruption to our facilities or systems relating to manufacturing, distribution, research and development, or information technology because of fire, extreme weather conditions, natural disaster, power loss, communications failure, geopolitical disruption, labor strikes, riots, cyber-attack, health epidemics and pandemics, unauthorized entry or other events could significantly disrupt our operations, the operations of suppliers and critical infrastructure. These events may also delay or prevent product manufacturing and shipment during the time required to repair, rebuild or replace the damaged facilities or systems. We have recently closed certain facilities and moved operations and resources to other facilities. As a result, this concentration of resources may further exacerbate the adverse effects of these events or make it more difficult for us to respond to the effects of these events. Climate change may increase both the frequency and severity of natural disasters and, consequently, risks to our operations and growth. Although we maintain property damage and business interruption insurance coverage on our facilities, our insurance might not cover all losses under such circumstances, and we may not be able to renew or obtain such insurance in the future on acceptable terms with adequate coverage or at reasonable costs.

Consolidation in the healthcare industry, group purchasing organizations and public procurement policies have lead to demands for price concessions, which reduces our revenues and may harm our ability to sell our products at prices necessary to support our current business strategies.

Healthcare costs have risen significantly over the past decade, which has resulted in or led to numerous cost reform initiatives by legislators, regulators and third-party payers. Cost reform has triggered a consolidation trend in the healthcare industry to aggregate purchasing power, which has created more requests for pricing concessions and is expected to continue in the future. Additionally, many of our customers belong to group purchasing organizations or integrated delivery networks that use their market power to consolidate purchasing decisions for these hospitals and healthcare service

22

Table of Contents

providers. These customers are often able to obtain lower prices and more favorable terms because of the potential sales volume they represent, which has lead to lower revenues and required us to take on additional liability. We expect that market demand, government regulation, third-party coverage and reimbursement policies and societal pressures will continue to change the healthcare industry worldwide, resulting in further business consolidations and alliances among our customers, which may exert further downward pressure on the prices of our products.

We may be unable to compete in our markets, particularly if there is a significant change in relevant practices or technology.

The markets in which our products compete are highly competitive. We face competition from many companies which are larger, better established, have greater financial, technical and other resources and possess a greater market presence than we do. Such resources and market presence may enable our competitors to more effectively market competing products or to market competing products at reduced prices in order to gain market share.

In addition, our ability to compete successfully is dependent, in part, upon our response to changes in technology and upon our efforts to develop and market new products which achieve significant market acceptance. Competing companies with substantially greater resources than us are actively engaged in research and development of new methods, treatments, drugs, and procedures to treat or prevent cardiovascular disease that could limit the market for our products and eventually make some of our products obsolete. A reduction in the demand for a significant number of our products, or a few key products, could have a material adverse effect on our business, operations or financial condition.

COVID-19 Pandemic Risks

The COVID-19 pandemic has negatively impacted our business and operations around the world and may continue to materially and adversely impact our business, operations and financial results.

The COVID-19 pandemic has created significant disruption and uncertainty in the global economy, has negatively impacted our business, results of operations and financial condition, and we anticipate that it will continue to negatively impact our business, results of operations and financial condition for the foreseeable future.

Numerous national, international, state and local jurisdictions have imposed, and may further impose, a variety of government orders and restrictions for their residents to control the spread of COVID-19. In 2020, such orders and restrictions caused significant alterations of our operations, work stoppages, slowdowns and delays, travel restrictions and event cancellations, among other effects, thereby significantly and negatively impacting our financial condition. In 2021, these conditions continued at varying levels throughout the year. Other disruptions that we experienced, which persist in various regions throughout the world, include (i) restrictions on our personnel and personnel of business partners to travel and access customers for training and case support; (ii) supply chain delays and disruptions, logistical challenges and increased freight, transportation and other expenses; (iii) delays in regulatory approvals by governmental and regulatory bodies; (iv) reductions in spending by our customers; (v) diversion of or limitations on employee resources that would otherwise be focused on the operations of our business, including because of sickness of employees or their families or the desire of employees to avoid contact with large groups of people; (vi) fluctuations in the availability of employees and potential employees; (vii) additional government requirements or other incremental mitigation efforts that may further impact our or our suppliers' capacity to manufacture our products; (viii) disruption of our research and development activities; and (ix) delays in ongoing studies and pre-clinical trials. Although some of these disruptions diminished in 2021, they may again return or further intensify their effect on our operations, whether as a direct result of the COVID-19 pandemic or other factors exacerbated by the effects of the COVID-19 pandemic.

In addition, elective procedures that use our products significantly decreased in number during much of 2020 as health care organizations around the world prioritized the treatment of patients with COVID-19 and reduced spending in other areas. For example, in the United States, governmental authorities recommended, and in certain cases required, that elective, deferrable, specialty and other procedures and appointments (many of which use our products), be suspended or canceled to avoid non-essential patient exposure to medical environments and potential infection with COVID-19 and to focus limited resources and personnel capacity toward the treatment of COVID-19 patients. In 2021, these procedures resumed in many locations, and overall, we saw significant improvement in our business during 2021; however, it is

23

Table of Contents

unclear when or if a resurgence of COVID-19, or increased spread of its variants, may again cause a rise in severe infections and force authorities and customers to impose restrictions that will negatively impact our operations.

All of these factors have also caused or contributed to disruptions and delays in our logistics and supply chain, and we may continue to experience these disruptions and delays. The full extent to which the COVID-19 pandemic impacts our business, operations and financial results will depend on future developments that are uncertain and cannot be predicted, including new information that may emerge concerning the severity and spread of the virus and its variants. To the extent the COVID-19 pandemic continues to adversely affect our business, operations and financial results, it may also have the effect of heightening other risks described herein, such as those relating to general economic conditions, demand for our products, relationships with suppliers and sales efforts.

Strategic, Business Development and Employee Attraction and Retention Risks

We may be unable to successfully manage growth and maintain operational efficiencies.

Successful implementation and execution of our business strategy will require that we effectively manage our growth. As the Company grows, we are often faced with decisions to (i) expand certain product lines and discontinue others, (ii) open or expand new facilities and close others, (iii) allocate resources between new and established markets, or (iv) allocate resources between the expansion of organic business and the acquisition of new product lines. The outcome of each of these decisions is uncertain, and even with the exercise of excellent business judgment, results may not align with expectations because of the many factors listed in this section. In addition, our management will need to continue to implement changes in certain aspects of our business, improve our information systems, infrastructure and operations to respond to increased demand, attract and retain qualified personnel, and develop, train, and manage an increasing number of employees. We may not have the resources available to implement certain necessary changes, and as a result, growth may be delayed or we may not be able to take advantage of certain business opportunities. Growth has placed, and will likely continue to place, an increasing strain on our management, sales and other personnel, and on our financial, product design, marketing, distribution, technology and other resources. Any failure to manage growth effectively could have a material adverse effect on our business, operations or financial condition.

Substantial costs are incurred when identifying, evaluating, negotiating and closing acquisitions, and failure to integrate acquired businesses may adversely impact our business and financial results.

Over the past several years, we have completed a series of significant acquisitions and, in the future we may consider other potential acquisitions and strategic transactions, certain of which may also be significant. We have incurred, and will likely continue to incur, significant expenses in connection with negotiating and consummating various acquisition and other strategic transactions. As we grow through acquisitions, we face the additional challenges of integrating the operations, culture, information management systems and other characteristics of the acquired entity with our own, including sales models related to capital equipment. Our efforts to integrate acquisitions may be hampered by delays, the loss of certain employees, suppliers or customers, proceedings resulting from employment terminations, culture clashes, unbudgeted costs, and other issues, which may occur at levels that are more severe or prolonged than anticipated.

Additionally, past and future acquisitions may increase the risks of competition we face by, among other things, extending our operations into industry segments and product lines where we have few existing customers or qualified sales personnel and limited expertise. Further, as a result of certain acquisitions, we are selling capital equipment, in addition to our historical sales of disposable medical devices. The sale of capital equipment may create additional risks and potential liability, which may negatively affect our business, operations or financial condition.

In addition, we may not realize competitive advantages, synergies or other benefits anticipated in connection with any such acquisition or other transaction. If we do not adequately identify and value targets for, or manage issues related to,

24

Table of Contents

acquisitions and strategic transactions, such transactions may not produce the anticipated benefits and have an adverse effect on our business, operations or financial condition.

We will be required to expend significant resources for research, development, testing and regulatory approval or clearance of our products under development, and these products may not be developed successfully or approved for commercial use.

Most of our products under development will require significant additional research, development, engineering and, in some cases, preclinical and clinical testing, as well as regulatory approval or clearance and a commitment of significant additional resources prior to their commercialization. It is possible that our products may not:

We may be unable to accurately forecast customer demand for our products and manage our inventory.

To ensure adequate supply, we must forecast our inventory needs and place orders with our suppliers based on estimates of future demand for particular products. Our ability to accurately forecast demand for our products could be negatively affected by many factors, including our failure to accurately manage our expansion strategy and customer acceptance of new products, product introductions by our competitors, an increase or decrease in customer demand for our products or for products of our competitors, unanticipated changes in general market conditions or regulatory matters and weakening of economic conditions, effects of the COVID-19 pandemic or consumer confidence in future economic conditions. Inventory levels in excess of customer demand may result in inventory write-downs or write-offs, which would impact our gross margin. Conversely, if we underestimate customer demand for our products, our manufacturing facilities may not be able to deliver products to meet our order requirements, which could damage our reputation and customer relationships.

Our forecasts of customer demand and related decisions that we make about production levels may take into account potential opportunities created by regulatory issues, supply disruptions or other challenges experienced by our competitors. We generally do not know the extent and cannot predict the duration of these challenges experienced by our competitors. As a result, our estimates about related increased demand for our products are inherently uncertain and subject to change. If our estimates incorrectly forecast the extent or duration of this increased demand, or the product types to which it relates, our revenues, margins and earnings could be adversely affected.

We lack direct sales and marketing capabilities in many countries and are dependent on our distributors for the commercialization of our products in these countries. If we are unable to maintain or establish sales capabilities on our own or through third parties, we may not be able to commercialize any of our products in those countries.

We have no or limited direct sales or marketing capabilities in some of the regions and countries in which our products are sold, including, among others, China, Japan, Russia and India. We have entered into distribution agreements with third parties to market and sell our products in those countries in which we do not have a direct sales force and in those countries in which we utilize a “modified direct” sales approach. If we are unable to maintain or enter into such distribution arrangements on acceptable terms, or at all, we may not be able to successfully commercialize our products in certain countries. Moreover, to the extent that we enter into distribution arrangements with other companies, our revenues, if any, will depend on the terms of any such arrangements and the efforts of others. These efforts may turn out not to be sufficient and our third-party distributors may not effectively sell our products. In addition, although our contract terms require our distributors to comply with all applicable laws regarding the sale of our products, including anti-competition, anti-corruption, anti-money laundering and sanctions laws, we may not be able to ensure proper compliance. If our distributors

25

Table of Contents

fail to effectively market and sell our products in full compliance with applicable laws, our results of operations and business could be impacted.

We are dependent upon key personnel.

Our success is dependent on key management personnel, including Fred P. Lampropoulos, our Chairman of the Board, President and Chief Executive Officer. Mr. Lampropoulos is not subject to any agreement prohibiting his departure, and we do not maintain key man life insurance on his life. The loss of Mr. Lampropoulos, or of certain other key management personnel, could have a materially adverse effect on our business and operations. Our success also depends on, among other factors, the successful recruitment and retention of key operating, manufacturing, sales and other personnel.

Regulatory, Litigation, Tax and Legal Compliance Risks

Regulations and trade policies implemented by foreign governments to reduce the costs of healthcare or promote business in their countries have caused, and are likely to continue to cause our sales to decline in such countries.

These regulations and policies result in increased costs, lower margins and lower sales than we would otherwise expect, which have a material adverse effect on our business, financial condition, results of operations, or cash flows. Our customers and suppliers may also be affected by these events, so even if we are not directly impacted, we may still experience lower demand for our products and increases in our manufacturing costs because of the effects these events may have on our customers and suppliers. For example, China has implemented a volume-based procurement process designed to decrease prices for medical devices and other products. This process has had a negative impact on our revenues in China and we expect it will continue to cause a decrease in the revenue we are able to generate in China.

The FDA regulatory clearance process is expensive, time-consuming and uncertain, and the failure to obtain and maintain required regulatory clearances and approvals could prevent us from commercializing our products.

Before we can introduce a new device or a new use of or a claim for a cleared device in the U.S., we must generally obtain clearance from the FDA, unless an exemption from premarket review or an alternative procedure, such as a de novo risk-based classification or a humanitarian device exemption, applies. The FDA clearance and approval processes for medical devices are expensive, uncertain and time-consuming.

We may make changes to our cleared products without seeking additional clearances or approvals if we determine such clearances or approvals are not necessary and document the basis for that conclusion. However, the FDA may disagree with our determination or may require additional information, including clinical data, to be submitted before a determination is made, in which case we may be required to delay the introduction and marketing of our modified products, redesign our products, conduct clinical trials to support any modifications and pay significant regulatory fines or penalties. In addition, the FDA may not approve or clear our products for the indications that are necessary or desirable for successful commercialization.

In particular, we are currently conducting a large, multinational pivotal human clinical trial of the Wrapsody Endoprosthesis. A successful outcome of this trial is required to obtain approval from the FDA and some international regulatory agencies. However, there is no assurance that we will be able to obtain the necessary regulatory clearances or approvals for the Wrapsody Endoprosthesis or any other products on a timely basis or at all. Further, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently cleared products on a timely basis. Delays in receipt of, or failure to obtain, regulatory clearances for any product enhancements or new products we develop would result in delayed or no realization of revenue from such product enhancements or new products and in substantial additional costs, which could decrease our profitability.

In addition, we are required to continue to comply with applicable FDA and other regulatory requirements once we have obtained clearance or approval for a product. We cannot provide assurance that we will successfully maintain the clearances or approvals we have received or may receive in the future. The loss of previously received clearances or

26

Table of Contents

approvals, or the failure to comply with existing or future regulatory requirements, could also have a material adverse effect on our business.

Our products are generally subject to regulatory requirements in foreign countries in which we sell them. We have experienced delays and expended significant resources in obtaining those approvals and clearances and we will likely continue to experience delays and uncertainty, and incur significant expenses, in obtaining those approvals or clearances.

In order to sell our products in foreign countries, generally we must obtain regulatory approvals and comply with the regulations of those countries. These regulations, including the requirements for approvals or clearances and the time required for regulatory review, vary from country-to-country. See our related discussion under Item 1. “Business – Regulation - Regulatory Approvals.”

In general, we intend to obtain MDR approvals for our principal products sold in the EU ahead of expiry dates; however for multiple reasons, including but not limited to changing business strategies, limited labor pool and contract resources, administrative delays, increased costs of obtaining MDR certification, availability of necessary data and Notified Body capacity, there will be some products that will not be fully compliant at the time of expiry. The additional time and resources required to obtain MDR certification has been a significant factor in, and will likely continue to influence, our decisions to discontinue sales and distribution of certain products in the EU.

Complying with and obtaining regulatory approval in foreign countries, including our efforts to comply with the requirements of the MDR, have caused and will likely continue to cause us to experience more uncertainty, risk, expense and delay in commercializing products in certain foreign jurisdictions, which could have a material adverse impact our net sales, market share and operating profits from our international operations.

The medical device industry is subject to extensive scrutiny and regulation by governmental authorities and we are currently operating under a Corporate Integrity Agreement. If governmental authorities determine that we have violated laws, regulations or our Corporate Integrity Agreement, our company or our employees may be subject to various penalties, including civil or criminal penalties.

Our products and business activities are subject to rigorous regulation by the FDA and other federal, state and foreign governmental authorities. These authorities and domestic and foreign legislators continue to scrutinize the medical device industry. In recent years, the U.S. Congress, DOJ, OIG, SEC and the Department of Defense, as well as foreign counterparts, have issued subpoenas and other requests for information to medical device manufacturers, primarily related to financial arrangements with healthcare providers, regulatory compliance and product promotional practices.

In October 2020, we entered into a Settlement Agreement with the DOJ to resolve their investigation into our past marketing transactions and practices. Under the Settlement Agreement and related agreements, we paid $18.7 million (which includes interest and certain fees) in exchange for a release from liability for the alleged conduct. The settlement was also conditioned upon our entering into the CIA. Please refer to the discussion in Item 1. “Business  - Regulation - Corporate Integrity Agreement.” Even if we fully comply with the CIA, we have incurred, and anticipate that we will continue to incur, substantial costs in connection with the settlement and compliance with the CIA. It is unclear what impact the settlement has had and may have on our reputation. This matter has consumed a significant amount of our resources and management’s attention.

We anticipate that government authorities will continue to scrutinize our industry closely, and that additional regulation by government authorities may increase compliance costs, exposure to litigation and other adverse effects on our operations. If we fail to comply with applicable regulatory requirements, including the terms of the CIA, we may be subjected to a wide variety of sanctions and enforcement actions, including warning letters that require corrective action, injunctions, product seizures or recalls, suspension of product manufacturing, revocation of approvals, import or export prohibitions, exclusion from participation in government healthcare programs, civil fines and/or criminal penalties, which in turn may have a negative impact our business, results of operations, financial condition and ability to obtain financing on reasonable terms.

27

Table of Contents

We are subject to laws targeting fraud and abuse in the healthcare industry, the violation of which could adversely affect our business or financial results.

Our operations are subject to various state and federal laws targeting fraud and abuse in the healthcare industry, including the federal Anti-Kickback Statute and other anti-kickback laws, which prohibit any person from knowingly and willfully offering, paying, soliciting or receiving remuneration, directly or indirectly, to induce or reward either the referral of an individual, or the furnishing or arranging for an item or service, for which payment may be made under federal healthcare programs, such as the Medicare and Medicaid programs. Violations of these fraud and abuse-related laws are punishable by criminal or civil sanctions, including substantial fines, imprisonment and exclusion from participation in healthcare programs such as Medicare and Medicaid, any of which could harm our business or negatively impact our financial results. Allegations of such violations could lead to expensive and time-consuming investigations by government authorities and result in conviction of these violations or settlement costs and additional restrictions, like the CIA discussed above under Item 1. “Business – Regulation - Corporate Integrity Agreement.”

Furthermore, our contracts with government-sponsored healthcare entities are subject to specific procurement requirements. Failure to comply with applicable rules or regulations or with contractual or other requirements may result in monetary damages and criminal or civil penalties as well as termination of our government contracts or our suspension or debarment from government contract work.

Our international operations make us subject to the U.S. Foreign Corrupt Practices Act and similar anti-bribery laws in non-U.S. jurisdictions, and our failure, or the failure of our distributors and agents, to comply with these laws could subject us to civil and criminal penalties and adversely affect our business.

We currently conduct our business in various foreign countries, and we expect to continue to expand our foreign operations. As a result, we are subject to the FCPA, the U.K. Bribery Act, and similar anti-corruption laws in non-U.S. jurisdictions. These laws generally prohibit companies and their intermediaries from illegally offering things of value to any individual for the purpose of obtaining or retaining business.

Compliance with the FCPA and other anti-bribery laws presents challenges to our operations. Our policies mandate compliance with the FCPA and all other applicable anti-bribery laws. Further, we expect our employees, distributors, agents and others who work for us or on our behalf to comply with these anti-bribery laws. Despite our training and compliance programs, our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employees, distributors or agents. If our employees, distributors or agents violate the provisions of the FCPA or other anti-bribery laws, or even if there are allegations of such violations, we could be subject to investigations or civil and criminal penalties or other sanctions, which could have a material, adverse effect on our reputation, business, results of operations, financial condition or cash flows.

Limits on reimbursement imposed by governmental and other programs may adversely affect our business and results of operation.

We sell our products to hospitals and other healthcare providers around the world that typically receive reimbursement for the services provided to patients, which incorporate the use of our products, from third-party payers such as government programs (e.g., Medicare and Medicaid in the U.S.) and private insurance programs. The ability of our customers to obtain adequate reimbursement for the health care procedures that use our products, such that the cost of our products is covered, is critical to our business. Limits on reimbursement imposed by such third-party payers may adversely affect our customers, such as hospitals, physicians and other healthcare providers, to purchase our products, which could adversely affect our business and results of operations.

Third-party payers, whether foreign or domestic, or governmental or commercial, are developing increasingly sophisticated methods of controlling healthcare costs. In general, a third-party payer covers a medical procedure only when the plan administrator is satisfied that the product or procedure is reasonable and necessary to the patient’s treatment; however, for certain payers (such as foreign governments and some commercial insurers) the cost-effectiveness of the treatment may also be a condition. In addition, in the U.S., no uniform policy of coverage and reimbursement for procedures using our products exists among third-party payers. Therefore, coverage and reimbursement for procedures using our products can differ significantly from payer to payer and, in some cases, jurisdiction to jurisdiction. In addition,

28

Table of Contents

payers continually review new and existing technologies for possible coverage and can, without notice, deny, change or reverse coverage decisions or alter prior authorization requirements for new or existing products and procedures. We cannot provide assurance that we will be successful in any efforts we may potentially undertake to reverse such non-coverage or unfavorable coverage decisions. If we are not successful in reversing non-coverage or unfavorable coverage policies, or if third-party payers that currently cover or reimburse certain procedures involving the use of our products reverse, change or limit their coverage of such procedures in the future, or if other third-party payers issue similar policies or adopt similar practices, our business could be adversely impacted.

Further, we believe that future coverage and reimbursement may be subject to increased restrictions, such as additional prior authorization requirements, both in the U.S. and in international markets. Third-party coverage and reimbursement for procedures using our products or any of our products in development for which we may receive regulatory approval may not be available or adequate in either the U.S. or international markets, which could have an adverse impact on our business.

Our business is subject to complex and evolving U.S., state and international laws and regulations regarding privacy and data protection. Many of these laws and regulations are subject to change and uncertain interpretation and could result in claims, changes to our business practices, penalties, increased cost of operations, or declines in user growth or engagement, or otherwise harm our business.

The U.S. and many other countries in which we conduct our operations have adopted laws and regulations protecting certain data, including medical and personal data (including HIPAA, the HITECH Act and the rules issued thereunder), and requiring data holders and controllers to implement administrative, logical and technical controls and procedures in order to protect the privacy of such data. Individual states have also begun to enact data privacy laws. For example, California’s Consumer Protection Act went into effect on January 1, 2020, giving consumers the right to demand certain information and actions from companies who collect personal information. Internationally, some countries have also passed laws and regulations that require individually identifiable data on their citizens to be maintained on local servers and that may restrict transfer or processing of that data. In addition, regulatory authorities around the world are considering a number of additional proposals concerning data protection. These laws and regulations have been, and may continue to be, inconsistent with each other, requiring different approaches in different jurisdictions. In addition, the interpretation and application of medical and personal data protection laws and regulations in the U.S., Europe, China and elsewhere are often uncertain and in flux. Further, we have incurred, and will likely continue to incur, significant expense in connection with our efforts to comply with those applicable laws and regulations. It is possible that these laws and regulations may be interpreted and applied in a manner that is inconsistent with our data practices, possibly resulting in fines or orders requiring that we change our data practices, which could have an adverse effect on our business and results of operations. Complying with these various laws could cause us to incur substantial costs or require us to change our business practices in a manner adverse to our business.

Legal developments in foreign countries have created compliance uncertainty regarding certain transfers of personal data from certain countries to the U.S. or other foreign countries. For example, the GDPR, applies to the processing of personal data related to the activities of an establishment in the EU or to the processing of personal data of data subjects who are in the EU where this is related to products and services that we offer to EU users. The GDPR created a range of new compliance obligations, which could cause us to change our business practices, and significantly increases financial penalties for noncompliance (including possible fines of up to 4% of the total worldwide global annual turnover for the preceding financial year or €20 million (whichever is higher) for the most serious infringements). In addition, as discussed under Item 1. “Business – Regulation - Privacy and Security,” the PIPL, similar to the GDPR, applies to personal information processing activities outside of China if companies provide products or services to individuals in China or analyze and evaluate the behavior of individuals in China. If we fail to comply with the requirements of the PIPL, we could incur severe penalties, including a fine of up to RMB 50 million or 5% of our annual turnover in the preceding year and revocation of our license to do business in China. If we incur any of these penalties in the EU or China for violations of the GDPR or PIPL, our business and operations in those areas could be adversely affected and have a material adverse effect on our financial results.

29

Table of Contents

Our failure to comply with applicable environmental, health and safety laws and regulations could affect our business, operations or financial condition.

We manufacture and assemble certain products that require the use of hazardous materials that are subject to various national, federal, state and local laws and regulations governing the protection of the environment, health and safety. Moreover, climate change and sustainability efforts and potential climate change regulations could lead to business interruption, significantly increased costs and other adverse consequences to our business. While the cost of compliance with such laws and regulations has not had a material adverse effect on our results of operations historically, compliance with future regulations may require additional capital investments or other expenses. Additionally, because we use a limited amount of hazardous and other regulated materials in our manufacturing processes, we are subject to certain risks of future liabilities, lawsuits and claims resulting from any substances we manufacture, dispose of or release. Certain environmental laws and regulations may impose “strict liability” for the conduct of, or conditions caused by, others, or for acts that were in non-compliance with all applicable laws at the time the acts were performed, rendering us liable without regard to our negligence or fault. Because of these laws, any accidental release may have an adverse effect on our business, operations or financial condition.

Our operations are also subject to various laws and regulations relating to occupational health and safety. We maintain safety, training and maintenance programs as part of our ongoing efforts to ensure compliance with applicable laws and regulations. Compliance with applicable health and safety laws and regulations has required and continues to require significant expenditures.

We are also subject to corporate social responsibility, or CSR, laws and regulations which require us to monitor the labor standards in our supply chain, including the California Transparency in Supply Chains Act, the UK Modern Slavery Act, and U.S. Federal Acquisition Regulations regarding Combating Trafficking in Persons. These CSR labor laws and regulations may impose additional processes and supplier management systems and have led certain key customers to impose additional requirements on medical device companies, including audits, as a prerequisite to selling products to such customers, which could result in increased costs for our products, the termination or suspension of certain suppliers, and reductions in our margins and profitability.

Use of our products in unapproved circumstances could expose us to liabilities.

The marketing clearances and approvals from the FDA and other regulators of certain of our products are, or are expected to be, limited to specific uses. We are prohibited from marketing or promoting any uncleared or unapproved use of our product. However, physicians may use these products in ways or circumstances other than those strictly within the scope of the regulatory approval or clearance. The use of our products for unauthorized purposes could arise from our sales personnel or distributors violating our policies by providing information or recommendations about such unauthorized uses. Consequently, claims may be asserted by the FDA or other enforcement agencies that we are not in compliance with applicable laws or regulations or have improperly promoted our products for uncleared or unapproved uses. The FDA or such other agencies could require a recall of products or allege that our promotional activities misbrand or adulterate our products or violate other legal requirements, which could result in investigations, prosecutions, fines or other civil or criminal actions.

Our products may be subject to product liability claims and warranty claims.

Our products are used in connection with invasive procedures and in other medical contexts that entail an inherent risk of product liability claims. If medical personnel or their patients suffer injury or death in connection with the use of our products, whether as a result of a failure of our products to function as designed, an inappropriate design, inadequate disclosure of product-related risks or information, improper use, or for any other reason, we could be subject to lawsuits seeking significant compensatory and punitive damages. Product liability claims may be brought by individuals or by groups seeking to represent a class. We have previously faced, and currently face, claims by patients claiming injuries from our products. To date, these claims have not resulted in material harm to our operations or financial condition. The outcome of this type of personal injury litigation is difficult to assess or quantify. We maintain product liability insurance; however, there is no assurance that this coverage will be sufficient to satisfy any claim made against us. Moreover, any product liability claim brought against us could result in significant costs, divert our management’s attention from other business matters or operations, increase our product liability insurance rates, or prevent us from securing insurance

30

Table of Contents

coverage in the future. As a result, any lawsuit seeking significant monetary damages may have a material adverse effect on our business, operations or financial condition.

We generally offer a limited warranty for the return of product due to defects in quality and workmanship. We attempt to estimate our potential liability for future product returns and establish reserves on our financial statements in amounts that we believe will be sufficient to address our warranty obligations; however, our actual liability for product returns may significantly exceed the amount of our reserves. If we underestimate our potential liability for future product returns, or if unanticipated events result in returns that exceed our historical experience, our financial condition and operating results could be materially harmed.

In addition, the occurrence of such an event or claim could result in a recall of products from the market or a safety alert relating to such products. Such a recall could result in significant costs, reduce our revenue, divert management’s attention from our business, and harm our reputation.

Our products may cause or contribute to adverse medical events that we are required to report to the FDA or other governmental authorities, and if we fail to do so, we may be subject to sanctions that may materially harm our business.

Our products are subject to medical device reporting regulations, which require us to report to the FDA information that reasonably suggests one of our products may have caused or contributed to a death or serious injury, or one of our products malfunctioned and, if the malfunction were to recur, this device or a similar device that we market would be likely to cause or contribute to a death or serious injury. Our obligation to report under the medical device reporting regulations is triggered on the date on which we become aware of information that reasonably suggests a reportable adverse event occurred. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or if the product characteristic that caused the adverse event is removed in time from our products. Inspections by the FDA or other regulators may reveal violations or instances of noncompliance under the QSRs and other post-market requirements. If we fail to comply with our medical device reporting obligations or commit a violation of these requirements, the FDA could issue warning letters or untitled letters, take administrative actions, commence criminal prosecution, impose civil monetary penalties, demand or initiate a product recall, seize our products, or delay the clearance of our future products. Other regulatory authorities could take similar actions within their jurisdictions.

Our employees, independent contractors, consultants, manufacturers and distributors may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, consultants, manufacturers and distributors may engage in fraudulent conduct or other illegal activity. Misconduct by these parties could include intentional, reckless or negligent conduct, or unauthorized activities that violate the healthcare laws and regulations of the FDA and other federal, state and international authorities, manufacturing standards, and laws that require the true, complete and accurate reporting of financial information or data. We have adopted a code of business conduct and ethics, and a global anti-corruption policy, but it is not always possible to identify and deter misconduct, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of significant civil, criminal and administrative penalties.

We may be a party to litigation in the course of our business or otherwise, which could affect our financial condition and results of operations.

We are routinely a party to or otherwise involved in legal proceedings, claims or other legal matters, arising in the course of our business. In particular, our company, our Chief Executive Officer and our Chief Financial Officer have been named in a complaint filed in the U.S. District Court for the Central District of California, which alleges violations of certain federal securities laws, and our company and certain of our officers and directors have been named in a related shareholder derivative proceeding filed in the U.S. District Court of the State of Utah. Legal proceedings can be complex and take

31

Table of Contents

many months, or even years, to reach resolution, with the final outcome depending on a number of variables, some of which are not within our control. Litigation is subject to significant uncertainty and may be expensive, time-consuming, and disruptive to our operations. Although it is our intention to vigorously defend ourselves in such legal proceedings, their ultimate resolution and potential financial and other impacts on us are uncertain. If a legal proceeding is resolved against us, it could result in significant compensatory damages or injunctive relief that could materially adversely affect our financial condition, results of operations and cash flows.

Intellectual Property

We may not be able to effectively protect our intellectual property, which could harm our business and financial condition.

Our ability to remain competitive is dependent, in part, upon our ability to protect our intellectual property rights and prevent other companies from infringing our intellectual property rights to produce competing products. We seek to protect our intellectual property rights through a combination of confidentiality and license agreements, maintaining certain trade secrets, and through registrations under patent, trademark, and copyright laws. However, these measures afford only limited protection and may be challenged, invalidated, or circumvented by third parties. Additionally, these measures may not prevent competitors from duplicating our products or gaining access to our proprietary information and technology. Third parties may copy all or portions of our products or otherwise use our intellectual property without authorization, and we may not be able to prevent the unauthorized disclosure or use of our intellectual property by consultants, vendors, former employees and current employees. Despite our efforts to restrict such unauthorized disclosure or use through nondisclosure agreements and other contractual restrictions, we may not be able to enforce these contractual provisions or we may incur substantial costs enforcing our legal rights.

Third parties may also develop similar or superior technology independently or by designing around our patents. In addition, the laws of some foreign countries do not offer the same level of protection for our intellectual property as the laws of the U.S. Further, no assurances can be given that any patent application we have filed or will file will result in a patent being issued, or that any existing or future patents will afford adequate or meaningful protection against competitors or against similar technologies. All of our patents and copyrights will eventually expire and some of our patents, including patents protecting significant elements of our technology, will expire within the next several years.

Filing, prosecuting and defending our intellectual property in countries throughout the world may be impractical and prohibitively expensive. Litigation may be necessary in the future to enforce our intellectual property rights, protect our trade secrets or to determine the validity and scope of proprietary rights claimed by others. Any such lawsuits that we might initiate could be expensive, take significant time and divert management’s attention from our business. Litigation also puts our patents at risk of being invalidated or interpreted narrowly. Additionally, we may provoke third parties to assert claims against us. Moreover, the legal systems of certain countries, particularly certain developing countries, do not favor the aggressive enforcement of patents and other intellectual property protections, which makes it difficult to stop infringement. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially valuable.

Third parties claiming that we infringe their intellectual property rights could cause us to incur significant legal or licensing expenses and prevent us from selling our products.

Our commercial success will depend in part on not infringing or violating the intellectual property rights of others. From time to time, third parties may claim that we have infringed their intellectual property rights, including claims regarding patents, copyrights, trademarks, trade secrets, and confidential information. We may not be aware of whether our products do or will infringe existing or future patents or the intellectual property rights of others. Because of constant technological change in the medical device industry in which we compete, the extensive patent coverage of existing technologies, and the rapid rate of issuance of new patents, it is possible that the number of these claims may grow. In addition, former employers of our former, current, or future employees may assert claims that such employees have improperly disclosed to us the confidential or proprietary information of such former employers. Any such claim, with or without merit, could result in costly litigation, distract management from day-to-day operations and harm our brand or reputation, which in turn could harm our business or results of operations. If we are not successful in defending such claims, we could be required to (i) stop selling our products, (ii) redesign our products, (iii) discontinue the use of related trademarks, technologies or

32

Table of Contents

designs, (iv) pay damages or indemnification obligations, or (v) enter into royalty or licensing arrangements. Royalty or licensing arrangements that we may seek in such circumstances may not be available to us on commercially reasonable terms or at all and we may not be able to redesign applicable products in a way to avoid infringing the intellectual property rights of others. We have made and expect to continue making significant expenditures to investigate, defend and settle claims related to the use of technology and intellectual property rights as part of our strategy to manage this risk.

Information Technology and Cybersecurity Risks

We rely on the proper function, availability and security of information technology systems to operate our business, and a material disruption of critical information systems or a material breach in the security of our systems may adversely affect our business and customer relationships.

We rely on information technology systems (including technology from third-party providers) to process, transmit, and store electronic information in our day-to-day operations, including sensitive personal information and proprietary or confidential information. We also rely on our technology infrastructure, among other functions, to interact with customers and suppliers, fulfill orders and bill, collect and make payments, ship products, provide support to customers, fulfill contractual obligations and otherwise conduct business. Our internal information technology systems, as well as those systems maintained by third-party providers, may be subjected to computer viruses or other malicious code, unauthorized access attempts, and cyber-attacks, any of which could result in data leaks or otherwise compromise our confidential or proprietary information and disrupt our operations. Cyber-attacks are becoming more sophisticated and frequent, and there can be no assurance that our protective measures have prevented or will prevent security breaches, any of which could have a significant impact on our business, reputation and financial condition, particularly attacks that result in our intellectual property and other confidential information being accessed or stolen.

We rely on third-party vendors to supply and support certain aspects of our information technology systems. These third-party systems could also become vulnerable to cyber-attacks, malicious intrusions, breakdowns, interference or other significant disruptions, and may contain defects in design or manufacture or other problems that could result in system disruption or compromise the information security of our own systems. In addition, we continue to grow in part through business and product acquisitions and, as a result, may face risks associated with defects and vulnerabilities in the systems operated by the other parties to those transactions, or difficulties or other breakdowns or disruptions in connection with the integration of the acquired businesses and products into our information technology systems.

Cyber-attacks could also result in unauthorized access to our systems and products, including personal information of individuals, which could trigger notification requirements, encourage actions by regulatory bodies, result in adverse publicity, prompt us to offer credit support products or services to affected individuals and lead to class action or other civil litigation. If we fail to monitor, maintain or protect our information technology systems and data integrity effectively or fail to anticipate, plan for or manage significant disruptions to these systems, we could (i) lose customers, (ii) be subject to fraud, (iii) breach our agreements with or duties toward customers, physicians, other health care professionals and employees, (iv) be subject to regulatory sanctions or penalties, (v) incur expenses or lose revenues, (vi) sustain damage to our reputation, or (vii) suffer other adverse consequences. Unauthorized tampering, adulteration or interference with our products may also create issues with product functionality that could result in a loss of data, risk to patient safety, and product recalls or field actions. Any of these events could have a material adverse effect on our business, operations or financial condition.

Market, Liquidity and Credit Risks

The agreements and instruments governing our debt contain restrictions and limitations that could significantly affect our ability to operate our business, as well as significantly affect our liquidity.

On July 31, 2019 we entered into a Third Amended and Restated Credit Agreement (“Third Amended Credit Agreement”), with Wells Fargo Bank, National Association, as administrative agent and a lender, and Wells Fargo Securities, LLC, BOFA Securities, Inc., HSBC Bank USA, National Association, and U.S. Bank National Association as joint lead arrangers and joint bookrunners, and Bank of America, N.A., HSBC Bank USA, National Association and U.S. Bank National Association as co-syndication agents. In addition, Bank of America, N.A., HSBC Bank USA, National Association, U.S. Bank, National Association, BMO Harris Bank, N.A., and MUFG Union Bank, Ltd. are parties to the

33

Table of Contents

Third Amended Credit Agreement as lenders. The Third Amended Credit Agreement amends and restates in its entirety our previously outstanding Second Amended and Restated Credit Agreement and all amendments thereto (the “Second Amended Credit Agreement”). The Third Amended Credit Agreement contains a number of significant covenants that could adversely affect our ability to operate our business, our liquidity or our results of operations. These covenants restrict, among other things, our incurrence of indebtedness, creation of liens or pledges on our assets, mergers or similar combinations or liquidations, asset dispositions, repurchases or redemptions of equity interests or debt, issuances of equity, payment of dividends and certain distributions and entry into related party transactions.

We have pledged substantially all of our assets as collateral for the Third Amended Credit Agreement. Our breach of any covenant in the Third Amended Credit Agreement, not otherwise cured, waived or amended, could result in a default under that agreement and could trigger acceleration of the underlying obligations. Any default under the Third Amended Credit Agreement could adversely affect our ability to service our debt and to fund our planned capital expenditures and ongoing operations. The administrative agent, joint lead arrangers, joint bookrunners and lenders under the Third Amended Credit Agreement have available to them the remedies typically available to lenders and secured parties, including the ability to foreclose on the collateral we have pledged. It could lead to an acceleration of indebtedness and foreclosure on our assets.

As currently amended, the Third Amended Credit Agreement provides for potential borrowings of up to $750 million. Such increased borrowing limits may make it more difficult for us to comply with leverage ratios and other restrictive covenants in the Third Amended Credit Agreement. We may also have less cash available for operations and investments in our business, as we will be required to use additional cash to satisfy the minimum payment obligations associated with this increased indebtedness.

We depend on generating sufficient cash flow to fund our debt obligations, capital expenditures, and ongoing operations.

We are dependent on our cash on hand and free cash flow to fund our debt obligations, capital expenditures and ongoing operations. Our ability to service our debt and to fund our planned capital expenditures and ongoing operations will depend on our ability to continue to generate cash flow. If we are unable to generate sufficient cash flow or we are unable to access additional liquidity sources, we may not be able to service or repay our debt, operate our business, respond to competitive challenges, or fund our other liquidity and capital needs.

The market price of our common stock has been and may continue to be volatile.

The market price of our common stock has recently been, and may in the future be, volatile for various reasons, including those discussed in these risk factors. Other events that could cause volatility in our stock include, without limitation, variances in our financial results; analysts’ and other projections or recommendations regarding our common stock specifically or medical technology stocks generally; any restatement of our financial statements or any investigation of us by the SEC, DOJ, OIG, FDA, or another regulatory authority; actions taken by activist investors or other shareholders, significant litigation or a decline, or rise, of stock prices in capital markets generally.

Fluctuations in foreign currency exchange rates may negatively impact our financial results.

As our operations have grown outside the U.S., we have also become increasingly subject to market risk relating to foreign currency. Those fluctuations could have a negative impact on our margins and financial results. During 2021, 2020 and 2019, the exchange rate between all applicable foreign currencies and the U.S. Dollar resulted in an increase in net sales of $10.3 million, a decrease in net sales of $1.3 million and a decrease in net sales of $13.5 million, respectively.

For the year ended December 31, 2021, $370.0 million, or 34.4%, of our net sales were denominated in foreign currencies, with our CNY- and Euro-denominated sales representing our largest currency risks to net sales. If the rate of exchange between foreign currencies declines against the U.S. Dollar, we may not be able to increase the prices we charge our customers for products whose prices are denominated in those respective foreign currencies. Furthermore, we may be unable or elect not to enter into hedging transactions which could mitigate the effect of declining exchange rates. As a result, if the rate of exchange between foreign currencies declines against the U.S. Dollar, our financial results may be negatively impacted.

34

Table of Contents

Fluctuations in our effective tax rate may adversely affect our business, financial condition or results of operation.

We are subject to taxation in numerous countries, states and other jurisdictions. Our effective tax rate is derived from a combination of applicable tax rates in the various countries, states and other jurisdictions in which we operate. In preparing our financial statements, we estimate the amount of tax that will become payable in each of these jurisdictions. Our effective tax rate may, however, differ from the estimated amount due to numerous factors, including a change in the mix of our profitability from country to country and changes in tax laws. Any of these factors could cause us to experience an effective tax rate significantly different from previous periods or our current expectations, which could have an adverse effect on our business, financial condition or results of operation.

Uncertainty relating to the LIBOR calculation method and potential phasing out of LIBOR after 2021 may adversely affect the interest rates under our Third Amended Credit Agreement.

Certain of the interest rates applicable to our Third Amended Credit Agreement, and applicable to hedging instruments we have purchased to offset interest rate risk under our Third Amended Credit Agreement, are LIBOR-based. On July 27, 2017, the U.K. Financial Conduct Authority (the “FCA”) announced that it will no longer persuade or compel banks to submit rates for the calculation of LIBOR rates after 2021. Actions by the FCA, other regulators or law enforcement agencies may result in changes to the method by which LIBOR is calculated. At this time, it is not possible to predict the effect of any such changes or any other reforms to LIBOR that may be enacted in the UK or elsewhere. Uncertainty as to the nature of such potential changes may adversely affect the trading market for LIBOR-based securities, including the floating rates applicable to our Third Amended Credit Agreement and related hedges. It is possible that the changes in how LIBOR is calculated, changes in the trading market for LIBOR-based securities or actions of the FCA and other government entities may cause unexpected increases in LIBOR rates or a breakdown in the LIBOR systems. If these issues arise, we could experience increased interest rates or uncertainty with respect to the calculation of interest on our Third Amended Credit Agreement and other instruments, which could harm our operations.

​

Item 1B. Unresolved Staff Comments.

None.

​

Our world headquarters is located in South Jordan, Utah, with our principal office for European operations located in Galway, Ireland and our principal office for Asian distribution located in Beijing, China. We also support our European operations from a distribution and customer service facility located in Maastricht, The Netherlands. In addition, we lease commercial space in India, Hong Kong, Italy, Dubai, Australia, Russia, Canada, Brazil, Malaysia, South Korea, Japan, South Africa, Singapore, Great Britain, Vietnam, Taiwan, New Zealand, Indonesia, and France, as well as in California and Texas. Our principal manufacturing and packaging facilities are located in Utah, Virginia, Texas, Ireland, Brazil, France, Singapore, Mexico, and The Netherlands. Our research and development activities are conducted principally at facilities located in Utah, California, Texas, Ireland, France, and Singapore.

Our total manufacturing, commercial, distribution, and research space is approximately 1.9 million square feet, of which approximately 1.0 million square feet is owned, and 0.9 million square feet is leased.

35

Table of Contents

The following is a summary of the approximate square footage of our key facilities as of December 31, 2021:

​

Operations associated with our cardiovascular segment utilize all of our facilities, while operations associated with our endoscopy segment are conducted primarily from our facilities located in Utah and Texas.

We believe our existing and proposed facilities will generally be adequate for our present and future anticipated levels of operations.

​

​

Item 3.Legal Proceedings.

See Note 10 “Commitments and Contingencies” to our consolidated financial statements set forth in Item 8 of this report and incorporated herein by reference.

​

Item 4.Mine Safety Disclosures.

The disclosure required by this item is not applicable.

​

​

36

Table of Contents

PART II

Market Price for the Common Stock

Our common stock is traded on the NASDAQ Global Select Market under the symbol “MMSI.” As of February 24, 2022, the number of shares of our common stock outstanding was 56,572,579 held by approximately 100 shareholders of record, not including shareholders whose shares are held in securities position listings. We did not repurchase any shares during the years ended December 31, 2021, 2020 and 2019.

Performance

The following graph compares the performance of our common stock with the performance of the NASDAQ Stock Market (U.S. Companies), the NASDAQ US Benchmark TR Index, and NASDAQ Stocks (SIC 3840-3849 U.S. Companies - Surgical, Medical and Dental Instruments and Supplies) for a five-year period by measuring the changes in common stock prices from December 31, 2016 to December 31, 2021. As a result of a change in the total return data made available to us through our third-party index provider, information for NASDAQ Stock Market (U.S. Companies) is provided only from December 31, 2016 through December 31, 2020, the last day this data was available from our third-party index provider. The broad equity market index that we intend to use going forward is the NASDAQ US Benchmark TR Index.

​

​

37

Table of Contents

The stock performance graph assumes for comparison that the value of our common stock and of each index was $100 on December 31, 2016 and that all dividends were reinvested. Past performance is not necessarily an indicator of future results.

NOTE:      Performance graph data is complete through last fiscal year. Corporate Performance Graph with peer group uses peer group only performance (excludes only Merit). Peer group indices use beginning of period market capitalization weighting. Prepared by Zacks Investment Research, Inc. Used with permission. All rights reserved. Copyright 1980-2022. Index Data: Calculated (or Derived) based from CRSP NASDAQ Stock Market (US Companies), Center for Research in Security Prices (CRSP®), Graduate School of Business, The University of Chicago. Copyright 2022. Used with permission. All rights reserved. Index Data: Copyright NASDAQ OMX, Inc. Used with permission. All rights reserved.

​

Item 6.Reserved

​

Item 7.Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with the Consolidated Financial Statements and related Notes thereto set forth in Item 8 of this report.

Overview

We design, develop, manufacture and market medical products for interventional and diagnostic procedures. For financial reporting purposes, we report our operations in two operating segments: cardiovascular and endoscopy. Our cardiovascular segment consists of cardiology and radiology devices, which assist in diagnosing and treating coronary arterial disease, peripheral vascular disease and other non-vascular diseases and includes embolotherapeutic, cardiac rhythm management, electrophysiology, critical care, breast cancer localization and guidance, biopsy, interventional oncology and spine devices. Our endoscopy segment consists of gastroenterology and pulmonology devices which assist in the palliative treatment of expanding esophageal, tracheobronchial and biliary strictures caused by malignant tumors. Within those two operating segments, we offer products focused in five core product categories: peripheral intervention, cardiac intervention, custom procedural solutions, OEM and endoscopy.

For the year ended December 31, 2021, we reported sales of $1.075 billion, up $110.9 million or 11.5%, compared to 2020 sales of $963.9 million.

Gross profit as a percentage of sales was 45.2% for the year ended December 31, 2021 as compared to 41.6% for the year ended December 31, 2020.

Net income for the year ended December 31, 2021 was $48.5 million, or $0.84 per share, as compared to net loss of ($9.8) million, or ($0.18) per share, for the year ended December 31, 2020.

During the years ended December 31, 2021 and 2020, the global COVID-19 pandemic impacted our business in various ways. In 2021, we observed a generally improving operating environment with fewer restrictions on elective and deferrable procedures leading to record sales of $1.075 billion, an increase of 11.5% from 2020, and 8.0% higher than 2019 sales of $994.9. Throughout the year we experienced notable variations in the pace of recovery across regions of the world influenced by the incidence and timing of COVID-19 infections and the associated governmental and patient responses.

We continue to focus our efforts to expand our presence in foreign markets, particularly Europe, Middle East and Africa (“EMEA”), China, Southeast Asia, Japan, Australia and Brazil, with the objective of capitalizing on additional market opportunities. In 2021, international sales were $465.9 million, or 43.3% of our net sales, up 12.6% from international sales of $413.8 million in 2020.

On November 10, 2020, we introduced a corporate transformation initiative known as “Foundations for Growth” with multi-year financial targets for growth and improved profitability for the three-year period ending December 31, 2023. As part of this initiative, we continue to review the need to consolidate facilities, strategically reduce operating expenses and incentivize our sales force to focus on products that will improve our financial performance. We have launched several initiatives to drive value creation for Merit, including SKU optimization, network consolidation, compensation and benefit

38

Table of Contents

programs, product line transfers and manufacturing initiatives. In the area of SKU rationalization, we have identified more than 2,000 products with revenues or gross margins which are below our targets, and in nearly all cases have moved customers to alternative products.

Results of Operations

The following table sets forth certain operational data as a percentage of sales for the years indicated:

​

Sales

Listed below are the sales by product category within each operating segment for the years ended December 31, 2021, 2020 and 2019 (in thousands, other than percentage changes):

​

Cardiovascular Sales. Our cardiovascular sales for the year ended December 31, 2021 were $1.043 billion, up 11.7%, when compared to the year ended December 31, 2020 of $934.2 million. Sales for the year ended December 31, 2021 were favorably affected by increased sales of:

39

Table of Contents

The foregoing increase in sales for the year ended December 31, 2021 was partially offset by decreased sales of:

Our cardiovascular sales for the year ended December 31, 2020 were $934.2 million, down (2.8%), when compared to the year ended December 31, 2019 of $961.0 million. Sales for the year ended December 31, 2020 were unfavorably affected by decreased sales of:

The foregoing decrease in sales for the year ended December 31, 2020 was partially offset by increased sales of:

Endoscopy Sales. Our endoscopy sales for the year ended December 31, 2021 were $31.5 million, up 6.2%, when compared to sales for the year ended December 31, 2020 of $29.7 million. Sales for the year ended December 31, 2021 were favorably affected by increased sales of our Elation® Balloon Dilator and our EndoMAXX® fully covered esophageal stent. Our endoscopy sales for the year ended December 31, 2020 were $29.7 million, down (12.4%), when compared to sales for the corresponding period in 2019 of $33.9 million. Sales for the year ended December 31, 2020 were unfavorably affected by decreased sales of the NvisionVLE® Imaging System as a result of the suspension of our distribution agreement with NinePoint Medical, Inc. (“NinePoint”), as well as decreased sales of probes and certain stents.

Geographic Sales

Sales trends for the years ended December 31, 2021 and 2020 were influenced by the incidence and timing of COVID-19 infections and the associated governmental and patient responses, which varied between countries and regions in both the current and prior-year periods. Listed below are sales by geography for the years ended December 31, 2021, 2020 and 2019 (in thousands, other than percentage changes):

​

​

40

Table of Contents

United States Sales: U.S. sales for the year ended December 31, 2021 were $608.9 million, or 56.7% of net sales, up 10.7% when compared to 2020. The increase in our domestic sales in 2021 was driven primarily by our U.S. direct and OEM businesses. U.S. sales for the year ended December 31, 2020 were $550.1 million, or 57.1% of net sales, down (4.5%) when compared to 2019. The decrease in our U.S. sales in 2020 was driven primarily by our U.S. direct, OEM and Endoscopy businesses.

International Sales. International sales for the year ended December 31, 2021 were $465.9 million, or 43.3% of net sales, up 12.6% when compared to 2020. The increase in our international sales during 2021 was primarily a result of higher sales in APAC, which increased 12.8% or $25.9 million, higher sales in EMEA, which increased 11.8% or $21.7 million, and higher rest of world sales which increased 16.2% or $4.5 million, compared to the corresponding period of 2020. International sales for the year ended December 31, 2020 were $413.8 million, or 42.9% of net sales, down (1.3%) from the year ended December 31, 2019. The decrease in our international sales during 2020 was primarily a result of lower sales in EMEA, which decreased (1.6%) or ($2.9) million and lower rest of world sales which decreased (8.7%) or ($2.6) million, compared to the corresponding period of 2019. Our sales in the Asia Pacific region were essentially flat year over year.

Our international sales are subject to foreign currency exchange rate fluctuations between the natural currency of a foreign country and the U.S. Dollar. Foreign currency exchange rate fluctuations, calculated by using the applicable average foreign exchange rates for the prior year increased sales 1.1% for the year ended December 31, 2021 compared to 2020 and decreased sales (0.1%) for the year ended December 31, 2020 compared to 2019.

Gross Profit

Our gross profit as a percentage of sales was 45.2%, 41.6%, and 43.5% for the years ended December 31, 2021, 2020 and 2019, respectively. The increase in gross profit as a percentage of sales for 2021, as compared to 2020, was primarily due to decreased amortization expense associated with acquisitions ($42.5 million in 2021 compared to $50.7 million in 2020), changes in product mix, improvements in manufacturing variances, and decreased obsolescence expense as a percentage of sales, partially offset by higher shipping and freight costs, among other factors. The decrease in gross profit as a percentage of sales for 2020, as compared to 2019, was primarily due to changes in product mix and increased obsolescence expense associated with lower forecasted demand for certain of our products as a result of the COVID-19 pandemic, partially offset by improvements in manufacturing variances from operational efficiencies, among other factors.

Operating Expenses

Selling, General and Administrative Expenses. Our selling, general and administrative (“SG&A”) expenses increased $38.0 million, or 12.8%, for the year ended December 31, 2021 compared to 2020 and decreased ($29.5) million, or (9.0%), for the year ended December 31, 2020 compared to 2019. SG&A expenses as a percentage of sales were 31.2%, 30.9% and 32.9% for the years ended December 31, 2021, 2020 and 2019, respectively.

The increase in SG&A expenses for the year ended December 31, 2021 compared to the year ended December 31, 2020 was primarily related to labor-related costs, which increased due primarily to higher commissions and bonus expense in the current-year period, in contrast to temporary salary cuts and furloughs in 2020. During the year ended December 31, 2021, we incurred approximately $6 million of contract termination costs in SG&A to renegotiate certain terms of our September 1, 2017 share purchase agreement with IntelliMedical Technologies Pty. Ltd. (“IntelliMedical”) and $18.6 million of corporate transformation and restructuring costs, including consulting charges, in connection with our Foundations for Growth program.

The decrease in SG&A expenses for the year ended December 31, 2020 compared to the year ended December 31, 2019 was primarily related to lower compensation expenses associated with headcount reductions and temporary salary reductions as a result of our expense reduction initiatives, lower commission expense associated with decreased sales, lower travel, entertainment and promotional expenses due to travel restrictions during the COVID-19 pandemic, and decreased acquisition and integration-related costs ($1.3 million in 2020 compared to $3.5 million in 2019), partially offset by increased idle capacity costs related to lower demand for certain products due to the COVID-19 pandemic and increased bad debt expense.

41

Table of Contents

Research and Development Expenses. Our research and development (“R&D”) expenses as a percentage of sales were 6.6%, 6.0% and 6.6% for the years ended December 31 2021, 2020, and 2019, respectively. R&D expenses increased by $13.7 million or 23.8% to $71.2 million for the year ended December 31, 2021, compared to $57.5 million in 2020. The increase in R&D expenses for the year ended December 31, 2021 compared to the year ended December 31, 2020 was primarily related to labor-related costs, which increased due to higher bonus expense in the current-year period, in contrast to temporary salary cuts and furloughs in the prior year. We also incurred increased clinical expenses for certain R&D projects (including our Wrapsody AV Access Efficacy Study) and higher expenses related to implementation of the MDR in the European Union.

R&D expenses decreased by ($8.1) million or (12.3%) to $57.5 million for the year ended December 31, 2020, compared to $65.6 million for the year ended December 31, 2019. The decrease in R&D expenses for the year ended December 31, 2020 was largely due to lower discretionary expenses (such as travel) and lower compensation expenses associated with headcount reductions and temporary salary reductions as a result of our expense reduction initiatives, as well as lower expenses as a result of a reduced number of research and development projects.

Legal Settlement. For the year ended December 31, 2021, we recorded approximately $10 million of net expense in connection with an agreement in principle to settle the securities class action lawsuit in December 2019 against Merit, our Chief Executive Officer and our Chief Financial Officer in the United States District Court for the Central District of California (the “Class Action Litigation”). See Note 10 to our consolidated financial statements set forth in Item 8 of this report for additional detail regarding the Class Action Litigation and pending settlement. This expense includes $18.25 million of settlement related costs, net of $8.2 million of insurance proceeds. For the year ended December 31, 2020, we recorded $18.7 million of expense in connection with a settlement agreement with the United States Department of Justice (“DOJ”) to resolve the DOJ’s investigation of certain marketing and promotional practices.

Impairment Charges. For the year ended December 31, 2021 we recorded impairment charges of $4.3 million. These impairments included $1.6 million of intangible asset and $1.3 million of property and equipment due to the planned discontinuance of the Advocate™ Peripheral Angioplasty Balloon product line, sold under our license agreements with ArraVasc Limited (“ArraVasc”) and $1.4 million of impairments of certain right-of-use (“ROU”) operating lease assets due to site consolidation decisions and changes in our projected cash flows for the underlying lease assets.

For the year ended December 31, 2020 we recorded impairment charges of $36.5 million, which included $1.8 million related to certain ROU operating lease assets and property and equipment, $6.0 million related to equity investments and purchase options, and $28.7 million related to certain acquired intangible assets, which included a partial impairment charge of $8.2 million of intangible assets from our acquisition of STD Pharmaceutical Products Limited (“STD Pharmaceutical”), a partial impairment charge of $8.0 million of intangible assets from our acquisition of certain assets from Laurane Medical S.A.S, a partial impairment charge of $4.8 million related to our license agreements with ArraVasc, and other intangible asset impairments charges of $7.7 million related to intangible assets from our acquisition of certain assets from DirectACCESS Medical, LLC, in-process technology intangible assets of Sontina Medical LLC acquired in connection with our acquisition of certain divested assets from BD, and a customer list intangible asset from our acquisition of ITL Healthcare Pty Ltd (“ITL”).

For the year ended December 31, 2019 we recorded impairment charges of $23.8 million, including a $20.5 million write-off of our NinePoint note receivable and purchase option due to our assessment of the collectability of the note receivable and management’s decision not to exercise our option to purchase the business and $3.3 million of impairment charges of certain intangible assets based on changes in revenue expectations and restructuring.

Contingent Consideration Expense (Benefit). For the years ended December 31, 2021, 2020 and 2019, we recorded $3.2 million, ($8.0) million and ($0.2) million, respectively, of net contingent consideration expense (benefit) from changes in the estimated fair value of our contingent consideration obligations stemming from our previously disclosed business acquisitions. The expense (benefit) in each fiscal year relates to changes in the probability and timing of achieving certain revenue and operational milestones, as well as expense for the passage of time.

42

Table of Contents

Acquired In-process Research and Development. During the years ended 2020 and 2019, we incurred in-process research and development charges of $0.3 million and $0.5 million, respectively associated with various asset acquisitions. We did not incur in-process research and development charges during the year ended December 31, 2021.

Operating Income (Loss)

Our operating profit by operating segment for the years ended December 31, 2021, 2020 and 2019 was as follows (in thousands):

​

Cardiovascular Operating Income (Loss). Our cardiovascular operating income for the year ended December 31, 2021 was $53.4 million, compared to cardiovascular operating loss of ($7.0) million for the year ended December 31, 2020. This increase in cardiovascular operating income was primarily related to higher sales and increased gross margin percentage, decreased legal settlement costs ($10 million in 2021, compared to $18.7 million in 2020) and decreased impairment charges within our cardiovascular operating segment ($4.3 million in 2021 compared to $36.5 million in 2020), partially offset by increased labor-related costs, approximately $6 million of contract termination costs to renegotiate certain terms of our share purchase agreement with IntelliMedical, increased corporate transformation costs, including consulting charges, in connection with our Foundations for Growth program and increased contingent consideration ($3.2 million of expense in 2021, compared to a benefit of ($8.0) million in 2020).  

Our cardiovascular operating loss for the year ended December 31, 2020 was ($7.0) million, compared to operating income of $25.8 million for the year ended December 31, 2019. This decrease in cardiovascular operating income was primarily related to lower sales and decreased gross margin percentage during the COVID-19 pandemic, expenses of $18.7 million associated with our settlement with the DOJ, impairment charges within our cardiovascular operating segment ($36.5 million in 2020 compared to $3.3 million in 2019), partially offset by lower compensation and discretionary expenses resulting from cost cutting initiatives and our response to the COVID-19 pandemic and an increase in contingent consideration benefit from changes in the estimated fair value of contingent consideration liabilities associated with prior acquisitions.

Endoscopy Operating Income (Loss). Our endoscopy operating income for the year ended December 31, 2021 was $7.5 million, compared to operating income of $5.5 million for the year ended December 31, 2020. This increase in endoscopy operating income relative to 2020 was primarily due to higher sales and increased gross margin percentage, partially offset by increased labor-related costs.

Our endoscopy operating income for the year ended December 31, 2020 was $5.5 million, compared to an operating loss of ($10.3) million for the year ended December 31, 2019. This increase in endoscopy operating income relative to 2019 was primarily due to lower impairment expense in our endoscopy operating segment (none in 2020 compared to $20.5 million in 2019) and lower compensation and discretionary expenses related to cost-cutting initiatives from our response to the COVID-19 pandemic, offset partially by lower sales and lower gross margins, due in part to changes in product demand during the COVID-19 pandemic.

Other Income (Expense)

Our other expense for the years ended December 31, 2021, 2020 and 2019 was ($7.0) million, ($11.7) million, and ($13.2) million, respectively. The decrease in other expense for 2021 compared to 2020 was principally the result of decreased interest expense due to lower average debt balances and a lower average interest rate during 2021 partially offset by a gain of $0.5 million on the sale of the assets associated with our Hypotube™ product line in 2020.

The decrease in other expense for 2020 compared to 2019 was principally the result of decreased interest expense due to lower average debt balances and a lower average interest rate during 2020, a gain on the sale of our Hypotube product line

43

Table of Contents

in 2020, and increased interest income from notes receivable, partially offset by increased expense related to foreign currency remeasurement.

Effective Tax Rate

Our provision for income taxes for the years ended December 31, 2021, 2020 and 2019 was a tax expense (benefit) of $5.5 million, ($3.4) million and ($3.3) million, respectively, which resulted in an effective income tax rate of 10.1%, 25.6%, and (148.6%), respectively. The decrease in the effective income tax rate for 2021 compared to 2020 was primarily the result of a change in the jurisdictional mix of earnings, additional benefit from stock-based compensation awards, as well as more foreign tax credits being utilized. The increase in the effective income tax rate for 2020 compared to 2019 was primarily the result of a pre-tax loss during the 2020 period, as well as a change in the jurisdictional mix of earnings.

Net Income (Loss)

Our net income (loss) for the years ended December 31, 2021, 2020 and 2019 was $48.5 million, ($9.8) million, and $5.5 million, respectively. The increase in net income for 2021, when compared to 2020, was primarily related to higher sales and increased gross margin percentage, as we observed an operating environment with fewer COVID-19 related restrictions throughout the year. Legal settlement costs decreased to $10 million in 2021, compared to $18.7 million in 2020, and impairment charges decreased to $4.3 million in 2021 compared to $36.5 million in 2020. This was partially offset by higher SG&A expenses due to higher labor-related costs, $6 million of contract termination costs to renegotiate certain terms of an acquisition agreement, increased corporate transformation costs, including consulting charges, in connection with our Foundations for Growth program, as well as contingent consideration expense of $3.2 million in 2021 compared to a benefit of ($8.0) million in 2020.

The decrease in net income for 2020, when compared to 2019, was primarily related to lower sales and decreased gross margin percentage during the COVID-19 pandemic, expenses of $18.7 million associated with our settlement with the DOJ, impairment charges ($36.5 million in 2020 compared to $23.8 million in 2019), partially offset by lower compensation and discretionary expenses resulting from cost cutting initiatives and our response to the COVID-19 pandemic and an increase in the benefit from changes in contingent consideration liabilities associated with prior acquisitions.

Liquidity and Capital Resources

Capital Commitments and Contractual Obligations

Our most significant contractual obligations as of December 31, 2021 included long-term debt of $243.1 million, of which $8.4 million is recorded in current liabilities, interest payments on this debt, operating lease liabilities of $72.2 million, of which $10.7 million is recorded in current liabilities, and contingent consideration liabilities of $48.2 million, of which $34.7 million is recorded in current liabilities. Additional information about these obligations is contained in Notes 8, 15 and 17 to our consolidated financial statements set forth in Item 8 of this report.

Cash Flows

At December 31, 2021 and 2020, we had cash and cash equivalents of $67.8 million and $56.9 million respectively, of which $55.7 million and $42.3 million, respectively, were held by foreign subsidiaries. We do not consider our foreign earnings to be permanently reinvested. As of December 31, 2021, approximately $1.9 million of our cash and cash equivalents represents restricted cash for the payment of certain import and other taxes for our subsidiary in China. There was no restricted cash for the year ended December 31, 2020. Cash held by our subsidiary in China is subject to local laws and regulations that require government approval for the transfer of such funds to entities located outside of China. As of December 31, 2021 and 2020, we had cash and cash equivalents, including restricted cash, of $28.5 million and $15.5 million, respectively, held by our subsidiary in China.

Cash flows provided by operating activities. We generated cash from operating activities of $147.2 million, $165.3 million and $77.8 million during the years ended December 31, 2021, 2020 and 2019, respectively. Net cash provided by operating

44

Table of Contents

activities decreased $18.0 million for the year ended December 31, 2021 compared to the year ended December 31, 2020. Significant changes in operating assets and liabilities affecting cash flows during these years included:

​

​

​

​

​

Net cash provided by operating activities increased $87.5 million for the year ended December 31, 2020 compared to the year ended December 31, 2019. Significant changes in operating assets and liabilities affecting cash flows during these years included:

​

​

Cash flows used in investing activities. We used cash in investing activities of $37.2 million, $58.7 million, and $134.5 million for the years ended December 31, 2021, 2020 and 2019, respectively. We invested in capital expenditures for property and equipment of $27.9 million, $46.0 million, and $78.2 million for the years ended December 31, 2021, 2020 and 2019, respectively. Capital expenditures in each fiscal year were primarily related to investment in buildings, property and equipment to support development and production of new and expanded product lines and to facilitate growth in our distribution markets. These investments include construction of a new manufacturing and research and development facility in South Jordan, Utah completed in early 2020 and expansion of our manufacturing facility in Tijuana, Mexico to incorporate production of our biopsy and drainage products acquired from BD and other products. Historically, we have incurred significant expenses in connection with facility construction, production automation, product development and the introduction of new products. We anticipate that we will spend approximately $50-60 million in 2022 for buildings, property and equipment.

​

Cash outflows invested in acquisitions for the year ended December 31, 2021 were $7.2 million and were primarily related to $4.1 for the settlement of deferred payments and the working capital adjustment associated with our acquisition of KA Medical, LLC (“KA Medical”) completed in November 2020 and $2.7 million for an equity investment in FluidX Medical Technology, Inc. (“Fluidx”). Cash outflows invested in acquisitions for the year ended December 31, 2020 were $11.0

45

Table of Contents

million and were primarily related to our acquisition of KA Medical. Cash outflows for acquisitions in 2019 were $53.9 million and were primarily related to our acquisition of Brightwater Medical, Inc. (“Brightwater”) and STD Pharmaceutical. For further discussion, refer to Note 3 to our consolidated financial statements set forth in Item 8 of this report.

​

Cash flows provided by (used in) financing activities. Cash provided by (used in) financing activities for the years ended December 31, 2021, 2020 and 2019 was ($98.4) million, ($95.7) million, and $33.5 million, respectively. In 2021 we decreased our net borrowings under our Third Amended Credit Agreement by $108.5 million and paid contingent consideration of $10.7 million, which is classified as a financing activity, principally related to our acquisition of Vascular Insights LLC (“Vascular Insights”). In 2020 we decreased our net borrowings by $88.4 million and paid contingent consideration of $13.1 million, which is classified as a financing activity, principally related to our acquisition of Cianna Medical Inc. (“Cianna Medical”). In 2019 we increased our net borrowings by $44.5 million to partially finance acquisitions and pay contingent consideration of $15.7 million, principally related to our Cianna Medical acquisition.

As of December 31, 2021, we had outstanding borrowings of $243.1 million and issued letter of credit guarantees of $3.5 million under the Third Amended Credit Agreement, with additional available borrowings of approximately $490 million, based on the leverage ratio required pursuant to the Third Amended Credit Agreement. Our interest rate as of December 31, 2021 was a fixed rate of 2.71% on $75 million as a result of an interest rate swap (see Note 9 to our consolidated financial statements set forth in Item 8 of this report) and a variable floating rate of 1.10% on $168.1 million. Our interest rate as of December 31, 2020 was a fixed rate of 2.37% on $175 million as a result of an interest rate swap and a variable floating rate of 1.40% on $176.6 million. The foregoing fixed rates are exclusive of potential future changes in the applicable margin. See Note 8 and Note 9 to our consolidated financial statements set forth in Item 8 of this report for additional details regarding the Third Amended Credit Agreement, our long-term debt and our interest rate swaps.

We currently believe that our existing cash balances, anticipated future cash flows from operations and borrowings under the Third Amended Credit Agreement will be adequate to fund our current and currently planned future operations for the next twelve months and the foreseeable future. In the event we pursue and complete significant transactions or acquisitions in the future, additional funds will likely be required to meet our strategic needs, which may require us to raise additional funds in the debt or equity markets.

Critical Accounting Policies and Estimates

Our significant accounting policies are summarized in Note 1 to our consolidated financial statements set forth in Item 8 of this report. While these significant accounting policies affect the reporting of our financial condition and results of operations, the SEC has requested that all registrants address their most critical accounting policies. The SEC has indicated that a “critical accounting policy” is one which is both important to the representation of the registrant’s financial condition and results and requires management’s most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. We base our estimates on past experience and on various other assumptions our management believes to be reasonable under the circumstances, the results of which form the basis for making judgments about carrying values of assets and liabilities that are not readily apparent from other sources. Actual results will differ and may differ materially from these estimates under different assumptions or conditions. Additionally, changes in accounting estimates could occur in the future from period to period. The following paragraphs identify our most critical accounting policies:

Valuation of Goodwill and Intangible Assets. We allocate any excess purchase price over the fair value of the net tangible and identifiable intangible assets acquired in a business combination to goodwill. We base the fair value of identifiable intangible assets acquired in a business combination on valuations that use information and assumptions that a market participant would use, including assumptions for estimated revenue projections, growth rates, cash flows, discount rates, useful life, and other relevant assumptions.

We test our goodwill balances for impairment annually as of July 1, or whenever impairment indicators arise. When impairment indicators are identified, we may elect to perform an optional qualitative assessment to determine whether it is more likely than not that the fair value of our reporting units has fallen below their carrying value. This assessment involves significant judgment, especially in the current environment due to uncertainties about the duration and impact of

46

Table of Contents

the COVID-19 pandemic. During our annual impairment test performed as of July 1, we utilized four reporting units in evaluating goodwill for impairment using a quantitative assessment, which uses a combination of a guideline public company market-based approach and a discounted cash flow income-based approach. The quantitative assessment considers whether the carrying amount of a reporting unit exceeds its fair value, in which case an impairment charge is recorded to the extent the reporting unit’s carrying value exceeds its fair value. This analysis requires significant judgment, including estimation of the amount, timing and duration of future cash flows, which is based on internal forecasts, and a determination of a discount rate based on our weighted average cost of capital. During our annual test of goodwill balances in 2021, which was completed during the third quarter of 2021, we determined that the fair value of each reporting unit with goodwill exceeded the carrying amount by a significant amount.

We evaluate long-lived assets, including amortizing intangible assets, for impairment whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable. We perform the impairment analysis at the asset group for which the lowest level of identifiable cash flows is largely independent of the cash flows of other assets and liabilities. We first compare undiscounted cash flows to the carrying amount of the asset group to determine if impairment exists, and then determine the fair value of our amortizing assets based on estimated future cash flows discounted back to their present value using a discount rate that reflects the risk profiles of the underlying activities. This analysis requires similar significant judgments as those discussed above regarding goodwill. In-process technology intangible assets, which are not subject to amortization until projects reach commercialization, are assessed for impairment at least annually and more frequently if events occur that would indicate a potential reduction in the fair value of the assets below their carrying value.

During the years ended December 31, 2021, 2020 and 2019, we identified indicators of impairment associated with certain acquired intangible assets within the asset groups based on our qualitative assessment. During the years ended December 31, 2021, 2020 and 2019 we recorded total impairment charges associated with intangible assets in our cardiovascular segment of $1.6 million, $28.7 million, and $3.3 million, respectively. These expenses are reflected within impairment charges in our consolidated statements of income (loss). The primary factors driving impairment of certain intangible assets were planned closure and restructuring activities and uncertainty about future product development and commercialization associated with certain acquired technologies, due in part to the economic impacts of the COVID-19 pandemic. See Note 5 to our consolidated financial statements set forth in Item 8 of this report for additional details regarding impairments of intangible assets.

Contingent Consideration. Contingent consideration is an obligation by the buyer to transfer additional assets or equity interests to the former owner upon reaching certain performance targets. Certain of our business combinations involve the potential for the payment of future contingent consideration, generally based on a percentage of future product sales or upon attaining specified future revenue or other relevant milestones. In connection with a business combination, any contingent consideration is recorded at fair value on the acquisition date based upon the consideration expected to be transferred in the future. We base the fair value of contingent consideration obligations acquired in a business combination on valuations that use information and assumptions that a market participant would use, including assumptions for estimated revenue growth rates, discount rates, probabilities of achieving regulatory approval, performance, or revenue-based milestones and other relevant factors. These assumptions are impacted by our best estimates of the timing and duration of the current COVID-19 pandemic.

We re-measure the estimated liability each quarter and record changes in the estimated fair value through operating expense in our consolidated statements of income (loss). Significant increases or decreases in our estimates and developments related to the COVID-19 pandemic could result in changes to the estimated fair value of our contingent consideration liability, as well as the result of changes in the timing and amount of revenue estimates and changes in the discount rate or periods. Our revenue milestone contingent liability associated with the November 2018 acquisition of Cianna Medical includes a sales growth multiplier, and our revenue milestones for the acquisition of Brightwater and Vascular Insights, LLC include payment thresholds. These and other similar contract features of our contingent consideration liabilities create sensitivity regarding the occurrence, timing, and amount of future payments.

​

For the years ended December 31, 2021, 2020 and 2019, we recognized contingent consideration expense (benefit) of $3.2 million, ($8.0) million and ($0.2) million, respectively, from changes in the estimated fair value of our contingent consideration obligations stemming from our previously disclosed business acquisitions. Changes in the fair value of our

47

Table of Contents

contingent consideration liabilities were primarily attributable to changes in anticipated sales growth in the acquired products and the anticipated timing of milestone payments. See Note 15 to our consolidated financial statements set forth in Item 8 of this report for additional details regarding our contingent liabilities.

​

Item 7A.Quantitative and Qualitative Disclosures About Market Risk.

Currency Exchange Rate Risk

Our consolidated financial statements are denominated in, and our principal currency is, the U.S. Dollar. For the year ended December 31, 2021, a portion of our net sales ($370.0 million, representing 34.4% of our aggregate net sales), was attributable to sales that were denominated in foreign currencies. All other international sales were denominated in U.S. Dollars. Our principal market risk relates to changes in the value of the Chinese Yuan Renminbi (CNY) and Euro (EUR) relative to the U.S. Dollar (USD), with limited market risk relating to various other currencies. In general, a strengthening of the U.S. Dollar against CNY has a negative effect on our operating income. Our Euro-denominated expenses associated with our European operations (manufacturing sites, a distribution facility and sales representatives) provide a natural hedge for Euro-denominated revenues. Accordingly, a strengthening of the U.S. Dollar against the Euro will generally have a positive effect on our operating income.

We forecast our net exposure related to sales and expenses denominated in foreign currencies. As of December 31, 2021 and 2020, we had entered into foreign currency forward contracts, which qualified as cash flow hedges, with aggregate notional amounts of $123.0 million and $168.2 million, respectively. We also forecast our net exposure in various receivables and payables to fluctuations in the value of various currencies, and we enter into foreign currency forward contracts to mitigate that exposure. As of December 31, 2021 and 2020, we had entered into foreign currency forward contracts, which were not designated as hedging instruments, related to those balance sheet accounts with aggregate notional amounts of $86.0 million and $74.8 million, respectively.

A sensitivity analysis of changes in the fair value of all currency exchange rate derivative contracts at December 31, 2021 and 2020 indicates that, if the U.S. Dollar strengthened or weakened by 10 percent against all currencies, it would have the following impact on the fair value of these contracts (in thousands):

​

Gains or losses on the fair value of derivative contracts would generally be offset by gains and losses on the underlying hedged transaction or net exposure. These offsetting gains and losses are not reflected above. See Note 9 to our consolidated financial statements set forth in Item 8 of this report for additional discussion of our foreign currency forward contracts.

Interest Rate Risk

As discussed in Note 8 to our consolidated financial statements set forth in Item 8 of this report, as of December 31, 2021, we had outstanding borrowings of $243.1 million under the Third Amended Credit Agreement. Accordingly, our earnings and after-tax cash flow are affected by changes in interest rates. On December 23, 2019, we entered into a pay-fixed, receive-variable interest rate swap with Wells Fargo Bank, with a notional amount of $75 million, to fix the one-month LIBOR rate at 1.71% for the period from July 6, 2021 to July 31, 2024. This interest rate swap is intended to reduce our exposure to interest rate fluctuations and was not entered into for speculative purposes. Excluding the amount that is subject to a fixed rate under the interest rate swap and assuming the current level of borrowings remained the same, it is estimated that our interest expense and income before income taxes would change by approximately $1.7 million annually for each one percentage point change in the average interest rate under these borrowings.

Certain of the interest rates applicable to our Third Amended Credit Agreement, and applicable to hedging instruments we have purchased to offset interest rate risk under our Third Amended Credit Agreement, are LIBOR-based. We anticipate replacement rates will be identified, as provided for in our Third Amended Credit Agreement, as LIBOR-based rates become unavailable.

48

Table of Contents

​

Item 8.Financial Statements and Supplementary Data.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the stockholders and the Board of Directors of Merit Medical Systems, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Merit Medical Systems, Inc. and subsidiaries (the "Company") as of December 31, 2021 and 2020, the related consolidated statements of income (loss), comprehensive income (loss), stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2021, and the related notes and the schedule listed in the Index at Item 15 (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 1, 2022, expressed an unqualified opinion on the Company's internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that were communicated or required to be communicated to the audit committee and that (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Other Long-term Obligations - Contingent Consideration Liability – Refer to Notes 1, 7, and 15 to the financial statements

Critical Audit Matter Description

49

Table of Contents

Certain of the Company’s past business combinations involve the potential for payment of future contingent consideration, generally based on a percentage of future product revenues or upon attaining specified future revenue milestones. As of December 31, 2021, the Company has recorded $48.2 million of contingent consideration liabilities of which $41.7 million are based on revenue milestones. Contingent consideration liabilities are re-measured at the estimated fair value at each reporting period with the change in fair value recognized within operating expenses in the accompanying consolidated statements of income (loss). During the year ended December 31, 2021, the Company recorded an expense of $3.2 million for the estimated change in fair value of contingent consideration liabilities. Included within contingent consideration liabilities is a liability for the estimated earn-out payment based on a revenue growth multiplier specified in the agreement from the November 2018 acquisition of Cianna Medical, Inc. The fair value of this revenue milestone contingent consideration liability was estimated using a Monte Carlo simulation model, which is a complex valuation methodology with inputs that include revenue projections and a discount rate.

We identified the Cianna Medical, Inc. revenue milestone contingent consideration liability as a critical audit matter because of management’s estimates of revenue projections and the complex valuation methodology and discount rate used to determine the fair value of the contingent consideration liability. This required a high degree of auditor judgment and an increased extent of effort, including the involvement of our fair value specialists, when performing audit procedures to evaluate the reasonableness of management’s estimates of revenue projections and to evaluate the appropriateness of the valuation methodology and discount rate.

How the Critical Audit Matter Was Addressed in the Audit

Our audit procedures related to management’s estimates of revenue projections and the valuation methodology and discount rate used to determine the fair value of the Cianna Medical, Inc. revenue milestone contingent consideration liability included the following, among others:

​

​

​

​

​

​

​

​

​

50

Table of Contents

​

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands)

​

​

​

​

51

Table of Contents

​

​

​

​

52

Table of Contents

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME (LOSS)

(In thousands, except per share amounts)

​

​

See notes to consolidated financial statements.

​

53

Table of Contents

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

(In thousands)

​

See notes to consolidated financial statements.

​

​

54

Table of Contents

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In thousands)

​