Annual Statements Open main menu

METTLER TOLEDO INTERNATIONAL INC/ - Annual Report: 2016 (Form 10-K)


 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
(Mark One)
 
 
þ
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the fiscal year ended December 31, 2016
OR
o
 
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the transition period from          to
Commission file number 001-13595
Mettler-Toledo International Inc.
(Exact name of registrant as specified in its charter)
Delaware
13-3668641
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
1900 Polaris Parkway
Columbus, OH 43240
and
Im Langacher 44
CH 8606 Greifensee, Switzerland
(Address of principal executive offices) (Zip Code)
1-614-438-4511 and +41-44-944-22-11
(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of Each Exchange on Which Registered
Common Stock, $0.01 par value
 
New York Stock Exchange
Preferred Stock Purchase Rights
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: NONE
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes þ     No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o     No þ
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes þ     No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  Yes o     No þ
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer þ
Accelerated filer o
Non-accelerated filer o
Smaller reporting company o
(Do not check if a smaller reporting company)
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o     No þ
As of January 30, 2017 there were 25,940,008 shares of the registrant’s Common Stock, $0.01 par value per share, outstanding. The aggregate market value of the shares of Common Stock held by non-affiliates of the registrant on June 30, 2016 (based on the closing price for the Common Stock on the New York Stock Exchange as of the last business day of the registrant’s most recently completed second fiscal quarter, June 30, 2016) was approximately $9.7 billion. For purposes of this computation, shares held by affiliates and by directors of the registrant have been excluded. Such exclusion of shares held by directors is not intended, nor shall it be deemed, to be an admission that such persons are affiliates of the registrant.
Documents Incorporated by Reference
Document
 
Part of Form 10-K Into Which Incorporated
Certain Sections of the Proxy Statement for 2016
 
Part III
Annual Meeting of Shareholders
 
 




METTLER-TOLEDO INTERNATIONAL INC.
ANNUAL REPORT ON FORM 10-K
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2016
 
 
Page
 
 EX-21
 EX-23.1
 EX-31.1
 EX-31.2
 EX-31.3
 EX-32
 EX-101 INSTANCE DOCUMENT
 EX-101 SCHEMA DOCUMENT
 EX-101 CALCULATION LINKBASE DOCUMENT
 EX-101 LABELS LINKBASE DOCUMENT
 EX-101 PRESENTATION LINKBASE DOCUMENT
 EX-101 DEFINITION LINKBASE DOCUMENT


2

Table of Contents

FORWARD-LOOKING STATEMENTS DISCLAIMER

You should not rely on forward-looking statements to predict our actual results. Our actual results or performance may be materially different than reflected in forward-looking statements because of various risks and uncertainties. You can identify forward-looking statements by terminology such as “may,” “will,” “could,” “would,” “should,” “expect,” “plan,” “anticipate,” “intend,” “believe,” “estimate,” “predict,” “potential,” or “continue.”
We make forward-looking statements about future events or our future financial performance, including earnings and sales growth, earnings per share, strategic plans and contingency plans, growth opportunities or economic downturns, our ability to respond to changes in market conditions, planned research and development efforts and product introductions, adequacy of facilities, access to and the costs of raw materials, shipping and supplier costs, gross margins, customer demand, our competitive position, capital expenditures, cash flow, tax-related matters, compliance with laws, and effects of acquisitions.
Our forward-looking statements may not be accurate or complete, and we do not intend to update or revise them in light of actual results. New risks also periodically arise. Please consider the risks and factors that could cause our results to differ materially from what is described in our forward-looking statements. See in particular “Factors Affecting Our Future Operating Results” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”



3

Table of Contents

PART I


Item 1.
Business
We are a leading global supplier of precision instruments and services. We have strong leadership positions in our businesses and believe we hold global number-one market positions in a majority of them. Specifically, we are the largest provider of weighing instruments for use in laboratory, industrial, and food retailing applications. We are also a leading provider of analytical instruments for use in life science, reaction engineering and real-time analytic systems used in drug and chemical compound development, and process analytics instruments used for in-line measurement in production processes. In addition, we are the largest supplier of end-of-line inspection systems used in production and packaging for food, pharmaceutical, and other industries.
Our business is geographically diversified, with net sales in 2016 derived 32% from Europe, 39% from North and South America, and 29% from Asia and other countries. Our customer base is also diversified by industry and by individual customer.
Mettler-Toledo International Inc. was incorporated as a Delaware corporation in 1991 and became a publicly traded company with its initial public offering in 1997.
Business Segments
We have five reportable segments: U.S. Operations, Swiss Operations, Western European Operations, Chinese Operations, and Other. See Note 17 to the audited consolidated financial statements and Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations under “Results of Operations by Reportable Segment” for detailed results by segment and geographic region.
We manufacture a wide variety of precision instruments and provide value-added services to our customers. Our principal products and services are described below. We also describe our customers and distribution, sales and service, research and development, manufacturing, and certain other matters. These descriptions apply to substantially all of our products and related reportable segments.
Laboratory Instruments
We make a wide variety of precision laboratory instruments in the sample preparation, synthesis, analytical bench top, and material characterization areas. Our portfolio includes laboratory balances, liquid pipetting solutions, titrators, physical value analyzers, thermal analysis systems, and other analytical instruments, such as moisture analyzers and density refractometers. The laboratory instruments business accounted for approximately 49% of our net sales in 2016, 48% in 2015, and 47% in 2014.
Laboratory Balances
Our laboratory balances have weighing ranges from one ten-millionth of a gram up to 64 kilograms. To cover a wide range of customer needs and price points, we market our balances in a range of product tiers offering different levels of functionality. We also provide filter weighing and powder dosing automated systems. Based on the same weighing technology platform, we also manufacture mass comparators, which are used by weights and measures regulators as well as laboratories to ensure the accuracy of reference weights. Laboratory balances are primarily used in the pharmaceutical, food, chemical, cosmetics, academia, and other industries.

4

Table of Contents

Pipettes
Pipettes are used in laboratories for dispensing small volumes of liquids. We operate our pipette business with the Rainin brand name. Rainin develops, manufactures, and distributes advanced pipettes, tips and accessories, including single- and multi-channel manual and electronic pipettes. Rainin maintains service centers in the key markets where customers periodically send their pipettes for certified recalibrations. Rainin’s principal end markets are pharmaceutical, biotech, and academia.
Analytical Instruments
Titrators measure the chemical composition of samples and are used in environmental and research laboratories as well as in quality control labs in the pharmaceutical, food and beverage, and other industries. Our high-end titrators are multi-tasking models, which can perform two determinations simultaneously on multiple vessels. Our offering includes robotics to automate routine work in quality control applications.
Thermal analysis systems measure material properties as a function of temperature, such as weight, dimension, energy flow, and viscoelastic properties. Thermal analysis systems are used in nearly every industry, but primarily in the plastics and polymer industries and increasingly in the pharmaceutical industry.
pH meters measure acidity in laboratory samples. We also sell density and refractometry instruments, which measure chemical concentrations in solutions. In addition, we manufacture and sell moisture analyzers, which precisely determine the moisture content of a sample by utilizing the loss on drying method, and UV/VIS spectrophotometers that optimize spectroscopic workflows.
Laboratory Software
LabX, our PC-based laboratory embedded software platform, manages and analyzes data generated by our balances, titrators, pH meters, moisture analyzers, and other analytical instruments like UV/VIS spectrophotometers. LabX provides full network capability; assists with workflow automation; has efficient, intuitive protocols; and enables customers to collect and archive data in compliance with the U.S. Food and Drug Administration’s traceability requirements for electronically stored data (also known as 21 CFR Part 11).
Automated Chemistry Solutions
Our current automated chemistry solutions focus on selected applications in the chemical and drug discovery process. Our automated lab reactors and in situ analysis systems are considered integral to the process development and scale-up activities of our customers. Our on-line measurement technologies, based on infrared and laser light scattering, enable customers to monitor chemical reactions and crystallization processes in real time in the lab and plant. In situ samples allow overnight sampling and testing. We believe that our portfolio of integrated technologies can bring significant efficiencies to the development process, enabling our customers to bring new chemicals and drugs to market faster.
Process Analytics
Our process analytics business provides instruments for the in-line measurement of liquid and gas parameters used primarily in the production process of pharmaceutical, biotech, beverage, microelectronics, chemical, and refining companies, as well as power plants. Close to half of our process analytics sales are to the pharmaceutical and biotech markets, where our customers need fast and secure scale-up and production that meet the validation processes required for GMP (Good Manufacturing Processes) and other regulatory standards like the USP (US Pharmacopoeia) regulations for ultrapure water quality. We are a leading solution provider for liquid analytical measurement to control and optimize production processes. Our solutions include sensor and analyzer technology for measuring pH,

5

Table of Contents

dissolved oxygen, carbon dioxide, conductivity, turbidity, ozone, total organic carbons, bioburden, sodium, and silica, as well as laser analyzers for gas measurement. Intelligent sensor diagnostics capabilities enable improved asset management solutions for our customers to reduce process downtime and maintenance costs. Our instruments offer leading multi-parameter capabilities and plant-wide control system integration, which are key for integrated measurement of multiple parameters to secure production quality and efficiency. With a worldwide network of specialists, we support customers in critical process applications, compliance, and systems integration questions.
Industrial Instruments
We manufacture numerous industrial weighing instruments and related terminals and offer dedicated software solutions for the pharmaceutical, chemical, food, discrete manufacturing, and other industries. In addition, we manufacture metal detection and other end-of-line product inspection systems used in production and packaging. We supply automatic identification and data capture solutions, which integrate in-motion weighing, dimensioning, and identification technologies for transport, shipping, and logistics customers. We also offer heavy industrial scales and related software. The industrial instruments business accounted for approximately 42% of our net sales in 2016, 43% in and 2015, and 44% in 2014.
Industrial Weighing Instruments
We offer a comprehensive line of industrial scales and weighing devices, such as bench scales, floor scales and weigh modules for weighing loads from a few grams to several thousand kilograms in applications ranging from measuring materials in chemical production to quality completeness control in discrete manufacturing to weighing packages at the end of the line. Our products are used in a wide range of applications, such as counting applications, formulating and mixing ingredients, and quality control.
Industrial Terminals
Our industrial scale terminals collect data and integrate it into manufacturing processes, helping to automate them. Our terminals allow users to remotely download formulation recipes or access setup data and can minimize downtime through predictive rather than reactive maintenance.
Transportation and Logistics
We supply automatic dimensional measurement and data capture solutions, which integrate in-motion weighing, dimensioning, and identification technologies. With these solutions, customers can measure the weight and cubic volume of packages for appropriate billing, load management, and quality control. Our solutions also integrate into customers’ information systems.
Vehicle Scale Systems
Our primary heavy industrial products are scales for weighing trucks or railcars (i.e., weighing bulk goods as they enter or leave a factory or at a toll station). Heavy industrial scales are capable of measuring weights up to 500 tons and permit accurate weighing under extreme environmental conditions. We also offer advanced computer software that can be used with our heavy industrial scales to facilitate a broad range of customer solutions and provides a complete system for managing vehicle transaction processing.
Industrial Software
We offer software that can be used with our industrial instruments. Examples include FreeWeigh.Net, statistical quality control software, FormWeigh.Net, our formulation/batching software; and DataBridge, which supports the operation of vehicle scales. FreeWeigh.Net and FormWeigh.Net provide full network capability and enable customers to collect and archive data in compliance with FDA 21 CFR Part 11.

6

Table of Contents

Product Inspection
Increasing safety and consumer protection requirements are driving the need for more sophisticated end-of-line product inspection systems (e.g., for use in food processing and packaging, pharmaceutical, and other industries). We are a leading global provider of metal detectors, x-ray and camera-based visioning equipment, checkweighers, and track-and-trace solutions that are used in these industries. Metal detectors are most commonly used to detect fine particles of metal that may be contained in raw materials or may be generated by the manufacturing process itself. X-ray-based vision inspection is used to detect metallic contamination in metallized packaging and many types of non-metallic contamination, such as glass, calcified bone, stones, and pits. Our x-ray systems can be used for mass control and for determining and controlling the fat content in meat. Our camera-based vision inspection solutions provide in-line inspection of package quality, labels, and content, which are needs for food and beverage, consumer goods, and pharmaceutical companies. Vision inspection systems with associated specialist software enable our pharmaceutical customers to implement traceability and serialization tracking, as required by regulation. Checkweighers are used to control the filled weight of packaged goods such as food, pharmaceuticals, and cosmetics. All of our technologies are integrated with material handling systems to ensure the correct presentation of the customer’s product to the device and the secure rejection of non-conforming product. Our technologies may also be used together as components of integrated packaging lines. ProdX Inspect is our quality and productivity control software for helping customers comply with regulations and optimize process efficiency, either as a stand-alone solution or through integration with the customer’s manufacturing and enterprise systems.
Retail Weighing Solutions
Supermarkets, hypermarkets, and other food retail businesses make use of multiple weighing and food labeling solutions for handling fresh goods (such as meats, vegetables, fruits, or cheeses). We offer networked scales and software, which can integrate backroom, counter, self-service, and checkout functions and can incorporate fresh goods item data into a supermarket’s overall food item and inventory management system. The scale screen display allows for in-store marketing and can help encourage consumers in the store to make more purchase decisions at the point of sale. In addition, we offer stand-alone scales for basic counter weighing and pricing, price finding, and printing. The customer benefits of our retail solutions are in the areas of enterprise-wide article and price management, merchandising, and regulatory compliance. In North America and select other markets, our offering also includes automated packaging and labeling solutions for the meat backroom, which are fully integrated with the scales in the store. The retail business accounted for approximately 9% of our net sales in 2016, 2015, and 2014.
Customers and Distribution
Our principal customers include companies in the following key end markets: the life science industry (pharmaceutical and biotech companies, as well as independent research organizations); food and beverage producers; food retailers; chemical, specialty chemicals, and cosmetics companies; the transportation and logistics industry; the metals industry; the electronics industry; and the academic community.
Our products are sold through a variety of distribution channels. Generally, more technically sophisticated products are sold through our direct sales force, while less complicated products are sold through indirect channels. Our sales through direct channels exceed our sales through indirect channels. A significant portion of our sales in the Americas is generated through indirect channels, including sales of our “Ohaus” branded products. Ohaus-branded products target markets, such as the educational market, in which customers are interested in lower cost, a more limited set of features, and less comprehensive support and service.

7

Table of Contents

We have a diversified customer base, with no single end-customer accounting for more than 1% of 2016 net sales.
Sales and Service
Market Organizations
We maintain geographically focused market organizations around the world that are responsible for all aspects of our sales and service. The market organizations are customer-focused, with an emphasis on building and maintaining value-added relationships with customers in our target market segments. Each market organization has the ability to leverage best practices from other units while maintaining the flexibility to adapt its marketing and service efforts to account for different cultural and economic conditions. Market organizations also work closely with our producing organizations (described below) by providing feedback on manufacturing and product development initiatives, new product and application ideas, and information about key market segments.
We have one of the largest and broadest global sales and service organizations among precision instrument manufacturers we compete against. At December 31, 2016, our sales and service group consisted of approximately 7,200 employees in sales, marketing and customer service (including related administration), and post-sales technical service, located in 39 countries. This field organization has the capability to provide service and support to our customers and distributors in major markets across the globe. This is important because our customers increasingly seek to do business with a consistent global approach.
Service
Our service business continues to be successful with a focus on providing uptime and calibration services, as well as further expansion of our offerings to provide value-added services for a range of market needs, including regulatory compliance, performance enhancements, application expertise and training, and remote services. We have a unique offering to our pharmaceutical customers in promoting the use of our instruments in compliance with FDA and other international regulations, and we can provide these services to most customers' locations around the world. Our global service network is also an important factor in our ability to expand in emerging markets. We estimate that we have the largest installed base of weighing instruments in the world. Service (representing service contracts, on demand services, and replacement parts) accounted for approximately 22% of our net sales in 2016, 2015, and 2014. A portion of this amount is derived from the sale of replacement parts.
Beyond revenue opportunities, we believe service is a key part of our solution offering and helps significantly in customer retention. The close relationships and frequent contact with our large customer base allow us to be the trusted advisor of our customers, which provides us with high-quality sales opportunities as well as innovative product and application ideas.
Research and Development and Manufacturing
Producing Organizations
Our research, product development, and manufacturing efforts are organized into a number of producing organizations. Our focused producing organizations help reduce product development time and costs, improve customer focus, and maintain technological leadership. The producing organizations work together to share ideas and best practices, and there is a close interface and coordinated customer interaction among marketing organizations and producing organizations.

8

Table of Contents

Research and Development
We continue to invest in product innovation to provide technologically advanced products to our customers for existing and new applications. Over the last three years, we have invested $362 million in research and development ($120.0 million in 2016, $119.1 million in 2015, and $123.3 million in 2014), which is approximately 5% of net sales for each year. Our research and development efforts fall into two categories:
technology advancements, which generate new products or features and increase the value of our products. These advancements may be in the form of enhanced or new functionality, new applications for our technologies, more accurate or reliable measurement, additional software capability, or automation through robotics or other means.
cost reductions, which reduce the manufacturing cost of our products through better overall design and/or improve the ease of serviceability.
We devote a substantial proportion of our research and development budget to software development. This includes software to process the signals captured by the sensors of our instruments, application-specific software, and software that connects our solutions into customers’ existing IT systems. We closely integrate research and development with marketing, manufacturing, and product engineering. We have approximately 1,300 employees in research and development and product engineering in countries around the globe.
Manufacturing
We are a worldwide manufacturer, with facilities principally located in China, Switzerland, the United States, Germany, and the United Kingdom. We emphasize product quality in our manufacturing operations, and most of our products require very strict tolerances and exact specifications. We use an extensive quality control system that is integrated into each step of the manufacturing process. All major manufacturing facilities have achieved ISO 9001 certification. We believe that our manufacturing capacity is sufficient to meet our present and currently anticipated demand. We expect to make net investments in new or expanded manufacturing facilities of $65 million to $75 million over the next two years.
We generally manufacture critical components, which are components that contain proprietary technology. When outside manufacturing is more efficient, we contract with other manufacturers for certain nonproprietary components. We use a wide range of suppliers. We believe our supply arrangements are adequate and that there are no material constraints on the sources and availability of materials. From time to time, we may rely on a single supplier for all of our requirements of a particular component. Supply arrangements for electronic components are generally made globally.
Backlog; Seasonality
Our manufacturing turnaround time is generally short, which permits us to manufacture orders to fill for most of our products. Backlog is generally a function of requested customer delivery dates and is typically no longer than one to two months.
Our business has historically experienced a slight amount of seasonal variation, particularly the high-end laboratory instruments business. Traditionally, sales in the first quarter are slightly lower than, and sales in the fourth quarter are slightly higher than, sales in the second and third quarters. Fourth quarter sales have historically generated approximately 28% to 30% of our net sales. This trend has a somewhat greater effect on income from operations than on net sales because fixed costs are generally incurred evenly across all quarters.

9

Table of Contents

Employees
Our total workforce was 14,200 throughout the world, including employees and 1,000 of temporary personnel, as of December 31, 2016, and includes approximately 5,500 in Europe, 3,800 in North and South America, and 4,900 in Asia and other countries.
We believe our employee relations are good, and we have not suffered any material employee work stoppage or strike during the last five years. Labor unions do not represent a substantial number of our employees. Approximately 600 employees in Germany and France are represented by unions.
Sustainability
We believe a sustainable business is one positioned for long-term growth and for us it defines our approach to decision making, from how we manage our impact on the environment to our relationships with employees, customers, and shareholders. In 2016, we published our latest sustainability report, which measures progress and highlights accomplishments since our last report. We followed the Global Reporting Initiative G4 guidelines. Our GreenMT program is designed to help save energy and resources and at the same time realize financial benefits. We are now working on making regular reductions in our emissions by finding new ways of managing our vehicle fleets, incorporating new design features into our products, improving the energy efficiency of our buildings and processes, and looking at how we source the electricity we use in our facilities. We think these efforts will produce a favorable impact on the environment as well as potential savings in future periods. 
Blue Ocean Program
“Blue Ocean” refers to our program to establish a new global operating model with standardized, automated and integrated processes, and high levels of global data transparency. It encompasses a new enterprise architecture, with a global, single instance ERP system. Within our IT systems, we are moving toward integrated, homogeneous applications and common data structures. We will also largely standardize our key business processes. The implementation of the systems and processes has been proceeding on a staggered basis over a multi-year period with the initial go-live rollout having occurred in 2010. We have implemented the Blue Ocean program in our Swiss, Chinese, U.K., and certain U.S. and German operations. We estimate that we have approximately two-thirds of the program completed as measured in users. We will continue to implement the program in additional locations over the coming years.
Intellectual Property
We hold over 5,000 patents and trademarks (including pending applications), primarily in the United States, Switzerland, Germany, the United Kingdom, Italy, France, Japan, China, South Korea, Brazil, and India. Our products generally incorporate a wide variety of technological innovations, some of which are protected by patents of various durations. Products are generally not protected as a whole by individual patents, and as a result, no one patent or group of related patents is material to our business. We have numerous trademarks, including the Mettler-Toledo name and logo, which are material to our business. We regularly protect against infringement of our intellectual property.
Regulation
Our products are subject to various regulatory standards and approvals by weights and measures regulatory authorities. All of our electrical components are subject to electrical safety standards. We believe that we are in compliance in all material respects with applicable regulations.
Approvals are required to ensure our instruments do not impermissibly influence other instruments and are themselves not affected by other instruments. In addition, some of our products are used in “legal for trade” applications, in which prices based on weight are calculated and for which specific weights and

10

Table of Contents

measures approvals are required. Although there are a large number of regulatory agencies across our markets, there is an increasing trend toward harmonization of standards, and weights and measures regulation is harmonized across the European Union.
Our products may also be subject to special requirements depending on the end-user and market. For example, laboratory customers are typically subject to Good Laboratory Practices (GLP), industrial customers to Good Manufacturing Practices (GMP), pharmaceutical customers to U.S. Food and Drug Administration (FDA) regulations, and customers in food processing industries may be subject to Hazard Analysis and Critical Control Point (HACCP) regulations. Products used in hazardous environments may also be subject to special requirements.
Environmental Matters
We are subject to environmental laws and regulations in the jurisdictions in which we operate. We own or lease a number of properties and manufacturing facilities around the world. Like many of our competitors, we have incurred, and will continue to incur, capital and operating expenditures and other costs in complying with such laws and regulations.
We are currently involved in, or have potential liability with respect to, the remediation of past contamination in certain of our facilities. A former subsidiary of Mettler-Toledo, LLC known as Hi-Speed Checkweigher Co., Inc. was one of two private parties ordered by the New Jersey Department of Environmental Protection, in an administrative consent order signed on June 13, 1988, to investigate and remediate certain ground water contamination at a property in Landing, New Jersey. After the other party under this order failed to fulfill its obligations, Hi-Speed became solely responsible for compliance with the order. Residual ground water contamination at this site is now within a Classification Exception Area which the Department of Environmental Protection has approved and within which the Company oversees monitoring of the decay of contaminants of concern. A concurrent Well Restriction Area also exists for the site. The Department of Environmental Protection does not view these vehicles as remedial measures, but rather as “institutional controls” that must be adequately maintained and periodically evaluated. We estimate that the costs of compliance associated with the site over the next several years will approximate a total of $0.4 million.
In addition, certain of our present and former facilities have or had been in operation for many decades and, over such time, some of these facilities may have used substances or generated and disposed of wastes that are or may be considered hazardous. It is possible that these sites, as well as disposal sites owned by third parties to which we have sent wastes, may in the future be identified and become the subject of remediation. Although we believe that we are in substantial compliance with applicable environmental requirements and, to date, we have not incurred material expenditures in connection with environmental matters, it is possible that we could become subject to additional environmental liabilities in the future that could have a material adverse effect on our financial condition, results of operations, or cash flows.
Competition
Our markets are highly competitive. Many of the markets in which we compete are fragmented both geographically and by application, particularly the industrial and food retailing markets. As a result, we face numerous regional or specialized competitors, many of which are well established in their markets. For example, some of our competitors are divisions of larger companies with potentially greater financial and other resources than our own. In addition, some of our competitors are domiciled in emerging markets and may have a lower cost structure than ours. We are confronted with new competitors in emerging markets which, although relatively small in size today, could become larger companies in their home markets. Given the sometimes significant growth rates of these emerging markets, and in light of their cost advantage over developed markets, emerging market competitors could become more significant

11

Table of Contents

global competitors. Taken together, the competitive forces present in our markets can impair our operating margins in certain product lines and geographic markets.
We expect our competitors to continue to improve the design and performance of their products and to introduce new products with competitive prices. Although we believe that we have technological and other competitive advantages over many of our competitors, we may not be able to realize and maintain these advantages. These advantages include our worldwide market leadership positions; our global brand and reputation; our track record of technological innovation; our comprehensive, high-quality solution offering; our global sales and service offering; our large installed base of weighing instruments; and the diversification of our revenue base by geographic region, product range, and customer. To remain competitive, we must continue to invest in research and development, sales and marketing, and customer service and support. We cannot be sure that we will have sufficient resources to continue to make these investments or that we will be successful in identifying, developing, and maintaining any competitive advantages.
We believe the principal competitive factors in developed markets for purchasing decisions are the product itself, application support, service support, and price. In emerging markets, where there is greater demand for less sophisticated products, price is a more important factor than in developed markets. Competition in the U.S. laboratory market is also influenced by the presence of large distributors that sell not only our products but those of our competitors as well.
Company Website and Information
You can find our website on the Internet at www.mt.com. The website contains information about us and our operations. The information contained on our website is not included in, or incorporated by reference into, this annual report on Form 10-K. You can view and download free of charge copies of each of our filings with the SEC on Form 10-K, Form 10-Q, Form 8-K, and Schedule 14A and all amendments to those reports by accessing www.mt.com, clicking on About Us, Investor Relations, and then clicking on SEC Filings. You may also read and copy these filings at the SEC’s Public Reference Room at 450 Fifth Street, N.W., Washington, D.C. 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains a website at http://www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.
Our website also contains copies of the following documents that you can download free of charge:
Corporate Governance Guidelines
Audit Committee Charter
Compensation Committee Charter
Nominating and Corporate Governance Committee Charter
Code of Conduct
Sustainability Report
You can also obtain in print, free of charge, any of the above documents and any of our reports on Form 10-K, Form 10-Q, Form 8-K, and Schedule 14A and all amendments to those reports by sending a written request to our Investor Relations Department:
Investor Relations
Mettler-Toledo International Inc.
1900 Polaris Parkway
Columbus, OH 43240 U.S.A.
Phone: +1 614 438 4748
E-mail: mary.finnegan@mt.com

12

Table of Contents

Item 1A.
Risk Factors
Factors Affecting Our Future Operating Results
We are subject to certain risks associated with our international operations and have a significant concentration of business in China.
We conduct business in many countries, including emerging markets in Asia, Latin America, and Eastern Europe, and these operations represent a significant portion of our sales and earnings. For example, our Chinese operations account for 15% of sales to external customers, approximately 30% of our global production, and 32% of total segment profit during 2016. In addition to the currency risks discussed below, international operations pose other substantial risks and problems for us.
Including the following:
local tariffs and trade barriers;
countries may revise or alter their respective legal and regulatory requirements;
difficulties in staffing and managing local operations and/or mandatory salary increases;
credit risks arising from financial difficulties facing local customers and distributors;
difficulties in protecting intellectual property;
nationalization of private enterprises which may result in the confiscation of assets, as we hold significant assets around the world in the form of property, plant, and equipment, inventory, and accounts receivable, as well as $103 million of cash at December 31, 2016 in our Chinese subsidiaries;
restrictions on investments and/or limitations regarding foreign ownership;
adverse tax consequences, including tax disputes, imposition or increase of withholding and other taxes on remittances and other payments by subsidiaries;
other uncertain local economic, political, and social conditions, including hyper-inflationary conditions or periods of low or no productivity growth; and
credit tightening or reduction in credit availability for local customers.
We must also comply with regulations regarding the conversion and repatriation of funds earned in local currencies. For example, we need government approval to convert earnings from our operations in China into other currencies and to repatriate these funds. If we cannot comply with these or other applicable regulations, we may face increased difficulties in using cash generated in China.
We are required to comply with various import, export control, and economic sanctions laws, which may affect our transactions with certain customers, business partners, and other persons, including in certain cases dealings with or between our employees and subsidiaries. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services, and technologies, and in other circumstances, we may be required to obtain an export license before exporting a controlled item. We follow all relevant laws and continue to do business in Russia. Sanctions imposed on business in Russia may affect the economy and our business in Russia. In addition, failure to comply with any of these regulations could result in civil and criminal, monetary and non-monetary penalties, disruptions to our business, limitations on our ability to import and export products and services, and damage to our reputation.
Growth in emerging markets can be volatile. For example, during 2015 China, Russia, and Brazil accounted for 18% of our sales to external customers and declined 11% in local currencies as customer investments slowed due to a variety of economic factors. China, our largest emerging market country, had improved market conditions in 2016 but market uncertainties remain due to overcapacity in certain industries and ongoing volatility in credit availability.

13

Table of Contents

We sell primarily to companies in developed countries. An economic downturn in these countries could hurt our operating results.
Most of our business is derived from companies in developed countries. Economic instability in many parts of the world, including sovereign debt levels in the European Union and the United States, continues to be a situation that we are monitoring closely. A potential financial crisis on financial institutions globally would likely have an adverse effect on the global capital markets and our business. In addition, if developed countries were to experience slow growth or recession, we could see the following effects:
a drop in demand for our products;
companies being unable to finance their businesses;
difficulty in obtaining materials and supplies;
potential devaluation and/or impairment of assets;
difficulty in collecting accounts receivables;
an increase in accounts receivable write-offs; and
greater foreign exchange rate volatility affecting our profitability and cash flow.
Economic downturns or recessions adversely affect our operating results because our customers often decrease or delay capital expenditures. Customers may also purchase lower-cost products made by competitors and not resume purchasing our products even after economic conditions improve. These conditions would reduce our revenues and profitability.
Currency fluctuations affect our operating profits.
Our earnings are affected by changing exchange rates. We are most sensitive to changes in the exchange rates between the Swiss franc, euro, and U.S. dollar. We have more Swiss franc expenses than we do Swiss franc sales because we develop and manufacture products in Switzerland that we sell globally and have a number of corporate functions located in Switzerland. When the Swiss franc strengthens against our other trading currencies, particularly the U.S. dollar and euro, our earnings go down. We also have significantly more sales in the euro than we do expenses. When the euro weakens against the U.S. dollar and Swiss franc, our earnings also go down.
In January 2015, the Swiss National Bank abandoned its exchange rate floor of 1.20 Swiss francs per euro. The Swiss National Bank's abandonment of the euro exchange rate floor resulted in an immediate strengthening of the Swiss franc against the euro and U.S. dollar. Excluding the effects of any foreign currency hedging contracts, we estimate a 1% strengthening of the Swiss franc against the euro would reduce our earnings before tax by approximately $1.5 million to $1.7 million annually. We also estimate a 1% strengthening of the Swiss franc against the U.S. dollar would reduce our earnings before tax by approximately $0.2 million annually in addition to the previously mentioned strengthening of the Swiss franc against the euro impact.
We also conduct business throughout the world, including Asia Pacific, the United Kingdom, Eastern Europe, Latin America, and Canada. Fluctuations in these currency exchange rates against the U.S. dollar can also affect our operating results. The most significant of these currency exposures is the Chinese renminbi. The impact on our earnings before tax of the Chinese renminbi weakening 1% against the U.S. dollar is a reduction of approximately $0.4 million to $0.6 million annually.
In 2016, the U.S. dollar strengthened against most of the major currencies throughout the world. The strength of the U.S. dollar may have a significant negative impact on the Company’s financial performance in the future.
In addition to the effects of exchange rate movements on operating profits, our debt levels can fluctuate due to changes in exchange rates, particularly between the U.S. dollar, the Swiss franc, and euro. Based on our outstanding debt at December 31, 2016, we estimate that a 10% weakening of the U.S. dollar against

14

Table of Contents

the currencies in which our debt is denominated would result in an increase of approximately $23.0 million in the reported U.S. dollar value of our debt.
Concerns regarding the Eurozone debt levels and market perception concerning the instability of the euro could affect our operating profits.
We conduct business in many countries that use the euro as their currency (the Eurozone). Concerns persist regarding the debt burden of certain Eurozone countries and their ability to meet future financial obligations. In addition, concerns in recent years have existed regarding the overall stability of the euro and the suitability of the euro as a single currency given the diverse economic and political circumstances in individual Eurozone countries.
These concerns could lead to the re-introduction of individual currencies in one or more Eurozone countries or, in more extreme circumstances, the possible dissolution of the euro currency entirely. Should the euro dissolve entirely, the legal and contractual consequences for holders of euro-denominated obligations would be determined by laws in effect at such time. These potential developments, or market perceptions concerning these and related issues, could adversely affect the value of our euro-denominated assets and obligations. In addition, concerns over the effect of this financial crisis on financial institutions in Europe and globally could have an adverse effect on the global capital markets and, more specifically, on the ability of our Company, our customers, suppliers, and lenders to finance their respective businesses, to access liquidity at acceptable financing costs, if at all, on the availability of supplies and materials, and on the demand for our products.
We are vulnerable to system failures and data loss risks, including those that may be related to cyber security attacks, which could harm our business.
We rely on our technology infrastructure to interact with suppliers, sell our products and services, support our customers, fulfill orders, and bill, collect, and make payments. Our systems are vulnerable to damage or interruption from natural disasters, power loss, telecommunication failures, terrorist or hacker attacks, malicious employees or employee negligence, computer viruses, ransomware, and other events. When we upgrade or change systems, we may suffer interruptions in service, loss of data, or reduced functionality. A significant number of our systems are not redundant, and our disaster recovery planning is not sufficient for every eventuality. Despite any precautions we may take, such problems could result in interruptions in our services, fraudulent loss of assets, or unauthorized disclosure of confidential information, which could harm our reputation and financial condition. We do not carry business interruption insurance sufficient to compensate us for losses that may result from interruptions in our services or data loss as a result of system failures.
Customers may use our products to generate or manage confidential information. Though we take steps to ensure our products are secure, it is possible customers could lose confidential information stored on our products. If a customer alleges security failures in our products cause or contribute to a loss, we could face harm to our reputation and financial condition and legal liability.
We also are in the process of implementing a program to globalize our business processes and information technology systems that includes the implementation of a Company-wide enterprise resource planning system. This has been proceeding on a staggered basis over several years with the initial go-live rollout having occurred in 2010. We have implemented the program in our Swiss, Chinese, U.K., and certain U.S. and German operations. We estimate that we have approximately two-thirds of the program implemented, as measured in users. If the implementation is flawed, we could suffer interruptions in operations and customer-facing activities that could harm our reputation and financial condition, or cause us to lose data, experience reduced functionality, or have delays in reporting financial information. It may take us longer to implement the program than we have planned, and the project may cost us more than we

15

Table of Contents

have estimated, either of which would negatively impact our ability to generate cost savings or other efficiencies. In addition, the implementation will increase our reliance on a single information technology system, which would have greater consequences should we experience a system disruption.
We operate in highly competitive markets, and it may be difficult for us to preserve operating margins, gain market share, and maintain a technological advantage.
Our markets are highly competitive. Many are fragmented both geographically and by application, particularly the industrial and food retailing markets. As a result, we face numerous regional or specialized competitors, many of which are well established in their markets. In addition, some of our competitors are divisions of larger companies with potentially greater financial and other resources than our own. There has also been an increase in the consolidation of precision instrument companies in recent years. Any consolidation within our market could result in competitors becoming larger and having greater financial and other resources than our own. Some of our competitors are domiciled or operate in emerging markets and may have a lower cost structure than ours. We are confronted with new competitors in emerging markets which, although relatively small in size today, could become larger companies in their home markets. Given the sometimes significant growth rates of these emerging markets, and in light of their cost advantage over developed markets, emerging market competitors could become more significant global competitors. Taken together, the competitive forces present in our markets could harm our operating margins. We expect our competitors to continue to improve the design and performance of their products and to introduce new products with competitive prices. Although we believe that our products and services have advantages over our competitors, we may not be able to realize and maintain these advantages.
Our ability to manufacture and deliver products and services may be disrupted.
We have key manufacturing facilities located in China, Europe, and the United States. Many of our products are developed and manufactured at single locations, with limited alternate facilities. In addition, a large portion of our products and spare parts are distributed through regional logistics centers, in which certain logistics activities are outsourced to third parties. If we experience any significant disruption in these facilities for any reason, such as strikes or other labor unrest, power interruptions, fire, earthquakes, or other events beyond our control, we may be unable to satisfy customer demand for our products or services and lose sales. It may be expensive to resolve these issues, even though some of these risks are covered by insurance policies. More importantly, customers may switch to competitors and may not return to us even if we resolve the interruption.
Our business would suffer if we were unable to obtain supplies of material.
We purchase most of our raw materials, components, and supplies from multiple suppliers. Some items are purchased from a limited or single source of supply, however, and disruption of these sources could affect our ability to manufacture products. Even where multiple sources of materials and components are available, the quality of the alternative materials, regulatory and contractual requirements to qualify materials for use in manufacturing, and the time required to establish new relationships with reliable suppliers could result in manufacturing delays and possible loss of sales. If we are unable to obtain materials or components for an extended time, this could damage our customer relationships and harm our financial condition or results of operations.
Our product development efforts may not produce commercially viable products in a timely manner.
If we do not introduce new products and enhancements, our products could become technologically obsolete over time, which would harm our operating results. To remain competitive, we must continue to make significant investments in research and development, sales and marketing, and customer service and

16

Table of Contents

support. We cannot be sure that we will have sufficient resources to continue to make these investments. In developing new products, we may be required to make substantial investments before we can determine their commercial viability. As a result, we may not be successful in developing new products and we may never realize the benefits of our research and development activities.
A prolonged downturn or additional consolidation in the pharmaceutical, food and beverage, and chemical industries could adversely affect our operating results. A reduction in the capital resources or government funding of our customers could reduce our sales.
Our products are used extensively in the pharmaceutical, food and beverage, and chemical industries. Consolidation in these industries hurt our sales in prior years. In recent years, there has been an increase in consolidation within these industries. A prolonged economic downturn or additional consolidation in any of these industries could adversely affect our operating results. In addition, the capital spending policies of our customers in these and other industries are based on a variety of factors we cannot control, including the resources available for purchasing equipment, the spending priorities among various types of equipment, and policies regarding capital expenditures. Any decrease or delay in capital spending by our customers would cause our revenues to decline and could harm our profitability. A decline in government funding of research or education could reduce some customers' ability to purchase our products.
Unanticipated changes in our tax rates or additional income tax liabilities could impact our profitability.
We are subject to income taxes in the United States and various other jurisdictions, and our domestic and international tax liabilities are subject to allocation of expenses among different jurisdictions. Our effective tax rates and tax obligations could be adversely affected by changes in tax laws or rates, changes in the mix of earnings by jurisdiction, changes in the valuation of deferred tax assets and liabilities, and material adjustments from tax audits.
In particular, the carrying value of deferred tax assets, which are predominantly in the U.S., is dependent upon our ability to generate future taxable income in the U.S. In addition, the amount of income taxes we pay is subject to ongoing audits in various jurisdictions, and a material assessment by a governing tax authority could affect our profitability.
Our tax expense and tax obligations could increase as a result of a changing application of tax law.
As a result of the current uncertain financial and economic environment, governments are facing greater pressure on public finances, which could lead to their more aggressively applying existing tax laws and regulations. Governments also periodically change tax laws and regulations. Any changes in corporate income tax rates or regulations, on repatriation of dividends, earnings or capital, or on transfer pricing, as well as changes in the interpretation of existing tax laws and regulations in the jurisdictions in which we operate, could adversely affect our cash flow and increase our overall tax burden, which would negatively affect our profitability.
We face risks related to sales through distributors and other third parties that we do not control, which could harm our business.
We sell some products through third parties, including distributors and value-added resellers. This exposes us to various risks, including competitive pressure, concentration of sales volumes, credit risks, and compliance risks. We may rely on one or a few key distributors for a product or market, and the loss of these distributors could reduce our revenue and net earnings. Distributors may also face financial difficulties, including bankruptcy, which could harm our collection of accounts receivables. Violations of the FCPA or similar anti-bribery laws by distributors or other third party intermediaries could materially

17

Table of Contents

impact our business. Risks related to our use of distributors may reduce sales, increase expenses, and weaken our competitive position.
A terrorism attack, other geopolitical crisis, or widespread outbreak of an illness or other health issue, could negatively affect our business, making it more difficult and expensive to meet our obligations to our customers, and could result in reduced demand from our customers.
Our global operations are susceptible to global events, including acts or threats of war or terrorism, international conflicts, political instability and natural disasters. Also, in recent years, a number of countries have experienced outbreaks of the H1N1 influenza (swine flu) or, in the Asia Pacific region, outbreaks of SARS and/or avian influenza (bird flu), and more recently, Ebola outbreaks in parts of Africa. Despite the implementation of certain precautions, we are susceptible to such outbreaks. As a result of such events, businesses can be shut down and individuals can become ill, quarantined, or otherwise unable to work. These events, particularly in North America, Europe, China, or other locations significant to our operations, could adversely affect general commercial activity, which could have a material adverse effect on our financial condition, results of operations, business, or prospects. If our operations are curtailed, we may need to seek alternate sources of supply for services and staff and these alternate sources may be more expensive. Alternate sources may not be available or may result in delays in shipments to our customers, each of which would affect our results of operations. In addition, a curtailment of our product design operations could result in delays in the development of new products. Further, if our customers’ businesses are similarly affected, they might delay or reduce purchases from us, which could adversely affect our results of operations.
We may face risks associated with future acquisitions.
We may pursue acquisitions of complementary product lines, technologies, or businesses. Acquisitions involve numerous risks, including difficulties in integrating the acquired operations, technologies, and products; diversion of management’s attention from other business concerns; and potential departures of key employees of the acquired company. If we successfully identify acquisitions in the future, completing such acquisitions may result in new issuances of our stock that may be dilutive to current owners, increases in our debt and contingent liabilities, and additional amortization expense related to intangible assets. Any of these acquisition-related risks could have a material adverse effect on our profitability.
Larger companies have identified life sciences and instruments as businesses they will consider entering, which could change the competitive dynamics of these markets. In addition, we may not be able to identify, successfully complete, or integrate potential acquisitions in the future. Even if we can do so, we cannot be sure that these acquisitions will have a positive impact on our business or operating results.
If we cannot protect our intellectual property rights, or if we infringe or misappropriate the proprietary rights of others, our operating results could be harmed.
Our success depends on our ability to obtain, maintain, and enforce patents on our technology, maintain our trademarks, and protect our trade secrets. Our patents may not provide complete protection, may expire, and competitors may develop similar products that are not covered by our patents. Our patents may also be challenged by third parties and invalidated or narrowed. We may experience a decline in sales and/or profitability if any of these things occur. Competitors sometimes seek to take advantage of our trademarks or brands in ways that may create customer confusion or weaken our brand. Improper use or disclosure of our trade secrets may still occur.
We may be sued for infringing on the intellectual property rights of others. The cost of any litigation could affect our profitability regardless of the outcome, and management attention could be diverted. If we are unsuccessful in such litigation, we may have to pay damages, stop the infringing activity, and/or

18

Table of Contents

obtain a license. If we fail to obtain a required license, we may be unable to sell some of our products, which could result in a decline in our revenues.
Departures of key employees could impair our operations.
Key employees could leave the Company. If any key employees stopped working for us, our operations could be harmed. Important R&D personnel may leave and join competitors, which could substantially delay or hinder ongoing development projects. We have no key man life insurance policies with respect to any of our senior executives.
We may be adversely affected by environmental laws and regulations.
We are subject to various environmental laws and regulations and incur expenditures in complying with environmental laws and regulations. We are currently involved in, or have potential liability with respect to, the remediation of past contamination in various facilities. In addition, some of our facilities are or have been in operation for many decades and may have used substances or generated and disposed of wastes that are hazardous or may be considered hazardous in the future. These sites and disposal sites owned by others to which we sent waste may in the future be identified as contaminated and require remediation. Accordingly, it is possible that we could become subject to additional environmental liabilities in the future that may harm our results of operations or financial condition.
We may be adversely affected by regulations and market expectations related to sourcing and our supply chain, including conflict minerals.
The SEC has adopted disclosures and reporting requirements for companies whose products contain certain minerals and their derivatives, namely tin, tantalum, tungsten, or gold, known as conflict minerals. Companies must report annually whether or not such minerals originate from the Democratic Republic of Congo (DRC) and adjoining countries and in some cases to perform extensive due diligence on their supply chains for such minerals. These requirements could adversely affect the sourcing, availability, and pricing of materials used in the manufacturing of our products. In addition, we have incurred additional costs to comply with the disclosure requirements, including cost related to determining the source of any of the relevant minerals used in our products. Since our supply chain is complex, the due diligence procedures that we have implemented may not enable us to ascertain with sufficient certainty the origins for these minerals or determine that these minerals are DRC conflict free, which may harm our reputation. We may also face difficulties in satisfying customers who may require that our products be certified as DRC conflict free, which could harm our relationships with these customers and/or lead to a loss of revenue. These requirements also could have the effect of limiting the pool of suppliers from which we source these minerals, and we may not be unable to obtain conflict-free minerals at prices similar to the past, which could increase our costs and adversely affect our manufacturing operations and our profitability.
Future laws, regulations, or customers may make additional demands on supply chain transparency. These demands can include more transparency into the activities of our suppliers with regards to human rights and sustainable sourcing. We have significant protections in place to ensure we partner with responsible suppliers, but increased demands may cause us to incur increased supply chain costs. If we can't satisfy customers' demands, we may lose business, and if we can't meet new regulatory requirements we may have to alter our sourcing at increased expense.

19

Table of Contents

We may be adversely affected by failure to comply with regulations of governmental agencies or by the adoption of new regulations. Changes in political leadership in the United States and certain European countries may also impact global trade or create uncertainty impacting our business.
Our products are subject to regulation by governmental agencies. These regulations govern a wide variety of activities relating to our products, including design and development, product safety, labeling, manufacturing, promotion, sales, and distribution. We also operate a global business and are subject to various laws and regulations in the many markets we do business, including those relating to competition, employment and labor practices, international trade, and corruption. If we fail to comply with these regulations, or if new regulations are adopted that substantially change existing practice or impose new burdens, we may have to recall products and cease their manufacture and distribution. In addition, we could be subject to investigation costs, reputational harm, fines, criminal prosecution, and other damages that could impact our profitability. Changes in political leadership in the United States and certain European countries may impact global trade or create uncertainty. In times of uncertainty, some customers delay investments or defer normal replacement cycles, which could have an adverse impact on our sales.
We may experience impairments of goodwill or other intangible assets.
As of December 31, 2016, our consolidated balance sheet included goodwill of $476.4 million and other intangible assets of $167.1 million.
Our business acquisitions typically result in goodwill and other intangible assets, which affect the amount of future period amortization expense and possible impairment expense. We make estimates and assumptions in valuing such intangible assets that affect our consolidated financial statements.
In accordance with U.S. GAAP, our goodwill and indefinite-lived intangible assets are not amortized, but are evaluated for impairment annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that an asset might be impaired. The evaluation is based on valuation models that estimate fair value. In preparing the valuation models, we consider a number of factors, including operating results, business plans, economic conditions, future cash flows, and transactions and market data. There are inherent uncertainties related to these factors and our judgment in applying them to the impairment analyses. The significant estimates and assumptions within our fair value models include sales growth, controllable cost growth, perpetual growth, effective tax rates, and discount rates. Our assessments to date have indicated that there has been no impairment of these assets.
Should any of these estimates or assumptions change, or should we incur lower-than-expected operating performance or cash flows, including from a prolonged economic slowdown, we may experience a triggering event that requires a new fair value assessment for our reporting units, possibly prior to the required annual assessment. These types of events and resulting analysis could result in impairment charges for goodwill and other indefinite-lived intangible assets if the fair value estimate declines below the carrying value.
Our amortization expense related to intangible assets with finite lives may materially change should our estimates of their useful lives change.
We have debt and we may incur substantially more debt, which could affect our ability to meet our debt obligations and may otherwise restrict our activities.
We have debt and we may incur substantial additional debt in the future. As of December 31, 2016, we had total indebtedness of approximately $735.4 million, net of cash of $158.7 million. Our debt instruments allow us to incur substantial additional indebtedness.

20

Table of Contents

The existence and magnitude of our debt could have important consequences. For example, it could make it more difficult for us to satisfy our obligations under our debt instruments; require us to dedicate a substantial portion of our cash flow to payments on our indebtedness, which would reduce the amount of cash flow available to fund working capital, capital expenditures, product development, and other corporate requirements; increase our vulnerability to general adverse economic and industry conditions, including changes in raw material costs; limit our ability to respond to business opportunities; limit our ability to borrow additional funds, which may be necessary; and subject us to financial and other restrictive covenants, which, if we fail to comply with these covenants and our failure is not waived or cured, could result in an event of default under our debt instruments.
The agreements governing our debt impose restrictions on our business.
The note purchase agreements governing our notes and the agreements governing our credit facility contain covenants imposing various restrictions on our business. These restrictions may affect our ability to operate our business and may limit our ability to take advantage of potential business opportunities. The restrictions these covenants place on us include limitations on our ability to incur liens and consolidate, merge, sell, or lease all or substantially all of our assets. Our credit facility and the note purchase agreements governing our senior notes also require us to meet certain financial ratios.
Our ability to comply with these agreements may be affected by events beyond our control, including economic, financial, and industry conditions. The breach of any covenants or restrictions could result in a default under the note purchase agreements governing the senior notes and/or under our credit facility. An event of default under the agreements governing our debt would permit holders of our debt to declare all amounts owed to them under such agreements to be immediately due and payable. Acceleration of our other indebtedness may cause us to be unable to make interest payments on the senior notes and repay the principal amount of the senior notes.
The lenders under our credit agreement may be unable to meet their funding commitments, reducing the amount of our borrowing capacity.
We have a revolving credit facility outstanding under which the Company and certain of its subsidiaries may borrow up to $800 million. Our credit facility is provided by a group of 13 financial institutions, which individually have between 2% and 14% of the total funding commitment. At December 31, 2016, we had borrowings of $395.2 million outstanding under our credit facility. Our ability to borrow further funds under our credit facility is subject to the various lenders’ financial condition and ability to make funds available. Even though the financial institutions are contractually obligated to lend funds, if one or more of the lenders encounters financial difficulties or goes bankrupt, such lenders may be unable to meet their obligations. This could result in us being unable to borrow the full $800 million amount available.
We make forward-looking statements, and actual events or results may differ materially from these statements because assumptions we have made prove incorrect due to market conditions in our industries or other factors.
We provide forward-looking statements both in our filings with the SEC and orally in connection with our quarterly earnings calls, including guidance on anticipated earnings per share. You should not rely on forward-looking statements to predict our actual results. Our actual results or performance may be materially different than reflected in forward-looking statements because of various risks and uncertainties.
Our forward-looking statements may not be accurate or complete, and we do not intend to update or revise them in light of actual results. New risks also periodically arise. Please consider the risks and factors that could cause our results to differ materially from what is described in our forward-looking

21

Table of Contents

statements. See in particular “Factors Affecting Our Future Operating Results” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”
In providing guidance on our future earnings, we evaluate our budgets, strategic plans, and other factors relating to our business. We make assumptions about external factors, including the following:
the outlook for our end markets and the global economy;
the impact of external factors on our competition;
the financial position of our customers;
the estimated costs of purchasing materials;
developments in personnel costs; 
our estimated income tax expense; and
rates for currency exchange, particularly between the Swiss franc and the euro.
Some of these assumptions may prove to be incorrect over time. For example, although no single end-customer accounts for more than 1% of our revenues, if a number of our customers experienced significant deteriorations in their financial positions concurrently, it could have an impact on our results of operations.
Some of our key internal assumptions include the following:
our ability to implement our business strategy;
our ability to implement price increases as forecasted;
the effectiveness of our sales and marketing programs such as our Spinnaker and market penetration and Field Turbo initiatives;
the effectiveness of our programs to improve our service business, including growth, globalization and productivity initiatives;
our ability to develop and deliver innovative products and services;
the continued growth of our sales in emerging markets; and
the effectiveness of productivity and cost saving initiatives.
These internal assumptions may also prove to be incorrect over time. For example, with respect to our ability to realize our planned price increases without disturbing our customer base in core markets, in certain markets, such as emerging markets, price tends to be a more significant factor in customers’ decisions to purchase our products. Furthermore, we can have no assurance that our cost reduction programs will generate adequate cost savings. Additionally, it may become necessary to take additional restructuring actions resulting in additional restructuring costs.
We believe our current assumptions are reasonable and prudent for planning purposes. However, should any of these assumptions prove to be incorrect, or should we incur lower-than-expected operating performance or cash flows, we may experience results different than our projections.
Our ability to generate and repatriate cash depends in part on factors beyond our control.
Our ability to make payments on our debt and to fund our share repurchase program, planned capital expenditures and research and development efforts depends on our ability to generate and repatriate cash in the future. This is subject to factors beyond our control, including general economic, financial, competitive, legislative, regulatory, governmental, and other factors described in this section.
We cannot ensure that our business will generate sufficient cash flows from operations or that future borrowings will be available to us under our credit facility in an amount sufficient to enable us to pay our debt or to fund our other liquidity needs. We may need to refinance all or a portion of our indebtedness on or before maturity. We cannot ensure that we will be able to refinance any of our debt, including our credit facility and the senior notes, on commercially reasonable terms or at all.

22

Table of Contents

Our ability to fund our share repurchase program is also dependent on our ability to repatriate our international cash flows.  Changes in governmental cash repatriation policies, restrictions, or tax laws could impair our ability to continue our share repurchase program.

Item 1B.
Unresolved Staff Comments
None.

23

Table of Contents

Item 2.
Properties
Our principal executive offices are located in Columbus, Ohio and Greifensee, Switzerland. The following table lists our principal facilities, indicating the location and whether the facility is owned or leased. The properties listed below serve primarily as manufacturing facilities or shared service centers and also typically have a certain amount of space for service, sales and marketing, and administrative activities. The facilities in Giessen, Germany and Viroflay, France are used primarily for sales and marketing. We believe our facilities are adequate for our current and reasonably anticipated future needs.
Location
 
Owned/Leased
 
Business Segment
 
 
 
 
 
Europe:
 
 
 
 
Greifensee/Nanikon, Switzerland
 
Owned
 
Swiss Operations
Uznach, Switzerland
 
Owned
 
Swiss Operations
Urdorf, Switzerland
 
Owned
 
Swiss Operations
Schwerzenbach, Switzerland
 
Leased
 
Swiss Operations
Manchester, England
 
Leased
 
Western European Operations
Royston, England
 
Owned
 
Western European Operations
Salford, England
 
Leased
 
Western European Operations
Viroflay, France (two facilities)
 
Building Owned
 
Western European Operations
 
 
Building Leased
 
 
Albstadt, Germany
 
Owned
 
Western European Operations
Giessen, (Hesse) Germany
 
Owned
 
Western European Operations
Giesen, (Lower Saxony) Germany
 
Owned
 
Western European Operations
   Warsaw, Poland
 
Leased
 
Other Operations
Americas:
 
 
 
 
Columbus, Ohio
 
Leased
 
U.S. Operations
Worthington, Ohio (two facilities)
 
Owned
 
U.S. Operations
Oakland, California
 
Owned
 
U.S. Operations
Billerica, Massachusetts
 
Leased
 
U.S. Operations
Ithaca, New York
 
Owned
 
U.S. Operations
Tampa, Florida
 
Leased
 
U.S. Operations
Thorofare, New Jersey
 
Owned
 
U.S. Operations
Other:
 
 
 
 
Shanghai, China (two facilities)
 
Buildings Owned;
 
Chinese Operations
 
 
Land Leased
 
 
Changzhou, China (two facilities)
 
Buildings Owned;
 
Chinese Operations
 
 
Land Leased
 
 
ChengDu, China
 
Buildings Owned;
 
Chinese Operations
 
 
Land Leased
 
 
Mumbai, India (three facilities)
 
Leased
 
Other Operations

Item 3.
Legal Proceedings
We are not currently involved in any legal proceeding that we believe could have a material adverse effect upon our financial condition, results of operations, or cash flows. See the disclosure in Item 1 above under “Environmental Matters.”
Executive Officers of the Registrant
See Part III, Item 10 of this annual report for information about our executive officers.

24

Table of Contents

PART II

Item 5.
Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities
Market Information for Common Stock
Our common stock is traded on the New York Stock Exchange under the symbol “MTD.” The following table sets forth on a per share basis the high and low sales prices for consolidated trading in our common stock as reported on the New York Stock Exchange Composite Tape for the quarters indicated.

 
Common Stock Price
Range
 
High
 
Low
2016
 

 
 

Fourth Quarter
$
429.91

 
$
397.73

Third Quarter
$
419.83

 
$
363.19

Second Quarter
$
385.50

 
$
347.76

First Quarter
$
347.09

 
$
298.14

2015
 

 
 

Fourth Quarter
$
345.75

 
$
283.27

Third Quarter
$
346.92

 
$
277.62

Second Quarter
$
343.44

 
$
317.01

First Quarter
$
331.84

 
$
289.09

Holders
At January 30, 2017, there were 56 holders of record of common stock and 25,940,008 shares of common stock outstanding. We estimate we have approximately 58,068 beneficial owners of common stock.
Dividend Policy
Historically, we have not paid dividends on our common stock. However, we will evaluate this policy on a periodic basis taking into account our results of operations, financial condition, capital requirements, including potential acquisitions, our share repurchase program, the taxation of dividends to our shareholders, and other factors deemed relevant by our Board of Directors.


25

Table of Contents

Share Performance Graph
The following graph compares the cumulative total returns (assuming reinvestment of dividends) on $100 invested on December 31, 2011 through December 31, 2016 in our common stock, the Standard & Poor’s 500 Composite Stock Index (S&P 500 Index), and the SIC Code 3826 Index — Laboratory Analytical Instruments.
Comparison of Cumulative Total Return Among Mettler-Toledo International Inc., the
S&P 500 Index and SIC Code 3826 Index — Laboratory Analytical Instruments

mt10k.jpg
 
12/31/11
12/31/12
12/31/13
12/31/14
12/31/15
12/31/16
Mettler-Toledo
$100
$131
$164
$205
$230
$283
S&P 500 Index
$100
$116
$154
$175
$177
$198
SIC Code 3826 Index
$100
$128
$188
$215
$237
$240

26

Table of Contents

Purchases of Equity Securities by the Issuer and Affiliated Purchasers
Issuer Purchases of Equity Securities
 
 
Total Number of
Shares Purchased
 
Average Price Paid
per Share
 
Total Number of
Shares Purchased as
Part of Publicly
Announced
Program
 
Approximate Dollar
Value (in thousands) of
Shares that may yet be
Purchased under the
Program
Period
 
 
 
 
October 1 to October 31, 2016
 
91,077

 
$
411.75

 
91,077

 
$
1,070,914

November 1 to November 30, 2016
 
105,291

 
415.47

 
105,291

 
1,027,167

December 1 to December 31, 2016
 
104,064

 
420.37

 
104,064

 
983,419

Total
 
300,432

 
$
416.04

 
300,432

 
$
983,419

We have a share repurchase program of which there was $983.4 million common shares remaining to be repurchased under the program as of December 31, 2016. The share repurchases are expected to be funded from cash balances, borrowings, and cash generated from operating activities. Repurchases will be made through open market transactions, and the amount and timing of purchases will depend on business and market conditions, the stock price, trading restrictions, the level of acquisition activity, and other factors.
We have purchased 26.0 million common shares since the inception of the program in 2004 through December 31, 2016, at a total cost of $3.5 billion. During the years ended December 31, 2016 and 2015, we spent $500 million and $495 million on the repurchase of 1,348,507 shares and 1,556,797 shares at an average price per share of $370.75 and $317.92, respectively. We reissued 278,623 shares and 403,908 shares held in treasury for the exercise of stock options and restricted stock units during 2016 and 2015, respectively.


27

Table of Contents

Item 6.
Selected Financial Data
The selected historical financial information set forth below as of and for the years then ended December 31 is derived from our audited consolidated financial statements. The financial information presented below, in thousands except share data, was prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”).
 
2016
 
2015
 
2014
 
2013
 
2012
Statement of Operations Data:
 

 
 

 
 

 
 

 
 

Net sales
$
2,508,257

 
$
2,395,447

 
$
2,485,983

 
$
2,378,972

 
$
2,341,528

Cost of sales
1,072,670

 
1,043,454

 
1,127,233

 
1,097,041

 
1,100,473

Gross profit
1,435,587

 
1,351,993

 
1,358,750

 
1,281,931

 
1,241,055

Research and development
119,968

 
119,076

 
123,297

 
116,346

 
112,530

Selling, general, and administrative
732,622

 
700,810

 
728,582

 
692,693

 
684,026

Amortization
36,052

 
30,951

 
29,185

 
24,539

 
21,357

Interest expense
28,026

 
27,451

 
24,537

 
22,711

 
22,764

Restructuring charges(a)
6,235

 
11,148

 
5,915

 
19,830

 
16,687

Other charges (income), net(b)
8,491

 
(867
)
 
2,230

 
3,103

 
1,090

Earnings before taxes
504,193

 
463,424

 
445,004

 
402,709

 
382,601

Provision for taxes
119,823

 
110,604

 
106,763

 
96,615

 
91,754

Net earnings
$
384,370

 
$
352,820

 
$
338,241

 
$
306,094

 
$
290,847

Basic earnings per common share:
 
 
 

 
 

 
 

 
 

Net earnings
$
14.49

 
$
12.75

 
$
11.71

 
$
10.22

 
$
9.37

Weighted average number of common shares
26,517,768

 
27,680,918

 
28,890,771

 
29,945,954

 
31,044,532

Diluted earnings per common share:
 
 
 

 
 

 
 

 
 

Net earnings
$
14.22

 
$
12.48

 
$
11.44

 
$
9.96

 
$
9.14

Weighted average number of common and common equivalent shares
27,023,905

 
28,269,615

 
29,571,308

 
30,728,482

 
31,824,077

Balance Sheet Data:
 
 
 

 
 

 
 

 
 

Cash and cash equivalents
$
158,674

 
$
98,887

 
$
85,263

 
$
111,874

 
$
101,702

Working capital(c)(d)
169,569

 
152,721

 
172,380

 
225,551

 
211,768

Total assets(d)
2,166,777

 
1,959,335

 
1,973,532

 
2,120,755

 
2,006,009

Long-term debt(d)
875,056

 
575,138

 
334,134

 
395,102

 
346,503

Other non-current liabilities(e)
204,957

 
194,552

 
218,108

 
193,170

 
240,886

Shareholders’ equity(f)
434,943

 
580,457

 
719,595

 
935,052

 
827,219

_________________________
(a)
Restructuring charges primarily relate to our global cost reduction programs. See Note 14 to the audited consolidated financial statements.
(b)
Other charges (income), net consists primarily of interest income, (gains) losses from foreign currency transactions and hedging activity, interest income, and other items. Other charges (income), net for 2016 also includes a one-time non-cash pension settlement charge of $8.2 million related to a lump sum offering to former employees of our U.S. pension plan, and acquisition transaction costs of $1.1 million.
(c)
Working capital represents total current assets net of cash, less total current liabilities net of short-term borrowings and current maturities of long-term debt.
(d)
Certain reclassifications have been made to prior year amounts to conform to the current year presentation.
(e)
Other non-current liabilities consist of pension and other post-retirement liabilities, plus certain other non-current liabilities. See Note 12 to the audited consolidated financial statements for pension and other post-retirement disclosures.
(f)
No dividends were paid during the five-year period ended December 31, 2016.


28

Table of Contents

Item 7.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis of our financial condition and results of operations should be read together with our audited consolidated financial statements.
Changes in local currencies exclude the effect of currency exchange rate fluctuations. Local currency amounts are determined by translating current and previous year consolidated financial information at an index utilizing historical currency exchange rates. We believe local currency information provides a helpful assessment of business performance and a useful measure of results between periods. We do not, nor do we suggest that investors should, consider such non-GAAP financial measures in isolation from, or as a substitute for, financial information prepared in accordance with GAAP. We present non-GAAP financial measures in reporting our financial results to provide investors with an additional analytical tool to evaluate our operating results.
We also include in the discussion below disclosures of immaterial qualitative factors that are not quantified. Although the impact of such factors is not considered material, we believe these disclosures can be useful in evaluating our operating results.
Overview
We operate a global business with sales that are diversified by geographic region, product range, and customer. We hold leading positions worldwide in many of our markets and attribute this leadership to several factors, including the strength of our brand name and reputation, our comprehensive offering of innovative instruments and solutions, and the breadth and quality of our global sales and service network.
Net sales in U.S. dollars increased 5% in 2016 and decreased 4% in 2015. Excluding the effect of currency exchange rate fluctuations, or in local currencies, net sales increased 7% in 2016 and increased 3% in 2015. Currency exchange rate fluctuations negatively impacted net sales as most of our non-U.S. dollar trading currencies, especially the euro, have weakened against the U.S. dollar. Net sales growth in local currencies during 2016 reflected broad-based growth across most geographies and product categories with generally favorable global market conditions. We expect to continue to benefit from our strong global leadership positions, diversified customer base, robust product offering, investment in emerging markets, significant installed base, and the impact of our global sales and marketing programs. Examples of these programs include identifying and investing in growth and market penetration opportunities, more effectively pricing our products and services, increasing our sales force effectiveness through improved guidance, and continuing to optimize our lead generation and lead nurturing processes. While market conditions were generally stable in 2016 for our customers to maintain their replacement cycles, we remain cautious regarding our sales outlook given the uncertainty in global markets.
With respect to our end-user markets, we experienced increased results during 2016 versus the prior year in our laboratory-related markets, such as pharmaceutical and biotech customers, as well as the laboratories of chemical companies and food and beverage companies. Demand from these markets was generally favorable during 2016. The local currency increase in net sales of our laboratory-related products during 2016 was driven by strong growth in most product categories, especially pipettes and automated chemistry.
Our industrial markets continued to benefit from our customers' focus on brand protection and food safety within our product inspection end-market. We also experienced improved market conditions in China despite continued market uncertainty related to overcapacity in a number of industries and volatility in credit availability. Emerging market economies have historically been an important source of growth based upon the expansion of their domestic economies, as well as increased exports as companies have

29

Table of Contents

moved production to low-cost countries. Our industrial-related products are especially sensitive to changes in economic growth.
Our food retailing markets experienced growth in each geographic region during 2016, with strong growth in Europe and Asia/Rest of World. Traditionally the spending levels in this sector have experienced more volatility than our other customer sectors due to the timing of customer project activity and new regulations. Similar to our industrial business, emerging markets have also historically provided growth as the expansion of local emerging market economies creates a significant number of new retail stores each year.
In 2017, we expect to continue to pursue the overall business growth strategies which we have followed in recent years:
Gaining Market Share. Our global sales and marketing initiative, “Spinnaker,” continues to be an important growth strategy. For example, over the past two years we have added more than 450 field sales and service resources to pursue under-penetrated market opportunities and will look to continue to make investments to front-end resources in 2017. We also aim to gain market share by implementing sophisticated sales and marketing programs, leveraging our extensive customer databases, and leveraging our product offering to larger customers through key account management. While this initiative is broad-based, efforts to improve these processes include leveraging big data analytics to identify, prioritize and pursue growth opportunities, the implementation of more effective pricing and value-based selling strategies and processes, improved sales force guidance, training and effectiveness, cross-selling, increased segment marketing and leads generation and nurturing activities. Our comprehensive service offerings, and our initiatives to globalize and harmonize these offerings, help us further penetrate developed markets. We estimate that we have the largest installed base of weighing instruments in the world, and we continue to leverage big data analytics and invest in sales and marketing activities aimed at increasing the proportion of our installed base that is under service contract, or selling new products that replace old products in our installed base. In addition to traditional repair and maintenance, our service offerings continue to expand into value-added services for a range of market needs, including regulatory compliance.
Expanding Emerging Markets. Emerging markets, comprising Asia (excluding Japan), Eastern Europe, Latin America, the Middle East, and Africa, account for approximately 33% of our total net sales. We have a two-pronged strategy in emerging markets: first, to capitalize on long-term growth opportunities in these markets and second, to leverage our low-cost manufacturing operations in China. We have almost a 30-year track record in China, and our sales in Asia have grown more than 13% on a compound annual growth basis in local currencies since 1999. We have broadened our product offering to the Asian markets and benefit as multinational customers shift production to China. India has also been a source of emerging market sales growth in past years due to increased life science research activities. Overall, market conditions in emerging markets were generally favorable during 2016. We experienced a 9% increase in emerging market local currency sales during 2016 versus the prior year, which included 9% local currency sales growth in China. Emerging market sales can be volatile and uncertain. We continue to experience unfavorable market conditions and reduced demand in certain industrial-related end-user segments in China due to overcapacity. Within China, we continue to redeploy resources and sales and marketing efforts to the faster-growing segments of pharma, food safety, and environment. We believe the long-term growth of these segments will be favorably impacted by the Chinese government's emphasis on science, high-value industries, and product quality. We expect our laboratory, process analytics, and product inspection businesses will particularly benefit from these segments. We also continue to invest and add sales and marketing resources to pursue growth in underpenetrated emerging markets.

30

Table of Contents

Extending Our Technology Lead. We continue to focus on product innovation. In the last three years, we spent approximately 5% of net sales on research and development. We seek to drive shorter product life cycles, as well as improve our product offerings and their capabilities with additional integrated technologies and software. In addition, we aim to create value for our customers by having an intimate knowledge of their processes via our significant installed product base.
Maintaining Cost Leadership. We continue to strive to improve our margins by optimizing our cost structure. For example, we have focused on reallocating resources and better aligning our cost structure to support our investments in market penetration initiatives, higher growth areas, and opportunities for margin improvement. We have also initiated various restructuring programs over the past few years in response to changing market conditions. As previously mentioned, shifting production to China has also been an important component of our cost savings initiatives. We have also implemented global procurement and supply chain management programs over the last several years aimed at lowering supply costs. Our cost leadership and productivity initiatives are also focused on continuously improving our invested capital efficiency, such as reducing our working capital levels and ensuring appropriate returns on our expenditures.
Pursuing Strategic Acquisitions. We seek to pursue "bolt-on" acquisitions that may leverage our global sales and service network, respected brand, extensive distribution channels, and technological leadership. We have identified life sciences, product inspection, and process analytics as three key areas for acquisitions. For example, during the third quarter of 2016, we acquired substantially all of the assets of Henry Troemner LLC (Troemner), a supplier of lab equipment, weights and weight calibration based in the United States for an aggregate purchase price $95.8 million that will be integrated into our laboratory product offering. During the third quarter of 2015, we also acquired a real-time water purity technology in the United States that has been integrated into our process analytics product offering.
Results of Operations — Consolidated
Net sales
Net sales were $2,508.3 million for the year ended December 31, 2016, compared to $2,395.4 million in 2015, and $2,486.0 million in 2014. This represents an increase of 5% in 2016 and a decrease of 4% in 2015 in U.S. dollars and an increase of 7% and 3% in local currencies, respectively. The Troemner acquisition contributed approximately 1% to our net sales during 2016.
In 2016, our net sales by geographic destination increased in U.S. dollars 5% in the Americas, 3% in Europe, and 6% in Asia/Rest of World. In local currencies, our net sales by geographic destination increased in 2016 by 5% in the Americas, 5% in Europe, and 10% in Asia/Rest of World. Excluding the Troemner acquisition, our local currency net sales growth in the Americas was 4%. While market conditions were generally favorable during 2016, we remain cautious regarding our sales outlook given the uncertainty in global markets. A discussion of sales by operating segment is included below.
As described in Note 17 to our audited consolidated financial statements, our net sales comprise product sales of precision instruments and related services. Service revenues are primarily derived from repair and other services, including regulatory compliance qualification, calibration, certification, preventative maintenance, and spare parts.
Net sales of products increased 5% in U.S. dollars and 7% in local currencies during 2016 and decreased 3% in U.S. dollars and increased 3% in local currencies in 2015. The Troemner acquisition contributed approximately 1% to our net sales of products during 2016. Service revenue (including spare parts) increased 4% in U.S. dollars and 6% in local currencies in 2016, and decreased 5% in U.S. dollars and increased 4% in local currencies in 2015. The Troemner acquisition contributed approximately 1% to our net sales of service during 2016.

31

Table of Contents

Net sales of our laboratory-related products, which represented approximately 49% of our total net sales in 2016, increased 6% in U.S. dollars and 8% in local currencies during 2016. The local currency increase in net sales of our laboratory-related products during 2016 was driven by strong growth in most product categories, especially pipettes and automated chemistry. The Troemner acquisition contributed approximately 1% to our net sales growth of laboratory-related products and services.
Net sales of our industrial-related products, which represented approximately 42% of our total net sales in 2016, increased 3% in U.S. dollars and 5% in local currencies during 2016. Local currency net sales included strong sales growth in product inspection.
Net sales of our food retailing products, which represented approximately 9% of our total net sales in 2016, increased 4% in U.S. dollars and 6% in local currencies during 2016. The increase in net sales in local currencies of our food retailing products during 2016 included growth in each geographic region, with strong growth in Europe and Asia/Rest of World.
Gross profit
Gross profit as a percentage of net sales was 57.2% for 2016, compared to 56.4% for 2015 and 54.7% for 2014.
Gross profit as a percentage of net sales for products was 60.8% for 2016, compared to 60.1% for 2015 and 58.1% for 2014. Gross profit as a percentage of net sales for services (including spare parts) was 44.6% for 2016, compared to 43.6% for 2015 and 42.8% for 2014.
The increase in gross profit as a percentage of net sales for 2016 includes benefits from higher sales volume, favorable price realization and reduced material costs, partially offset by investments in our field service organization.
Research and development and selling, general, and administrative expenses
Research and development expenses as a percentage of net sales were 4.8% for 2016 and 5.0% for both 2015 and 2014. Research and development expenses in U.S. dollars increased 1% in 2016 and decreased 3% in 2015, and in local currencies increased 4% in 2016 and 2% in 2015, relating to the timing of research and development project activity.
Selling, general, and administrative expenses as a percentage of net sales were 29.2% for 2016, compared to 29.3% for both 2015 and 2014. Selling, general, and administrative expenses increased 4% in 2016 in U.S. dollars and 6% in local currencies and decreased 4% in U.S. dollars and increased 3% in local currencies in 2015. The increase during 2016 includes higher cash incentive expense, investments in our field sales organization and acquisitions, offset in part by benefits from our cost savings programs.
Amortization expense
Amortization expense was $36.1 million in 2016, compared to $31.0 million and $29.2 million in 2015 and 2014, respectively. The increase in amortization expense is primarily related to our investments in information technology, including the Company's Blue Ocean program, as well as the Troemner acquisition.
Restructuring charges
During the past few years, we initiated cost reduction measures in response to global economic conditions. For the year ended December 31, 2016, we have incurred $6.2 million of restructuring expenses which primarily comprise employee-related costs. See Note 14 to our audited consolidated financial statements for a summary of restructuring activity during 2016.

32

Table of Contents

Other charges (income), net
Other charges (income), net consisted of net charges of $8.5 million in 2016, compared to net income of $0.9 million and net charges of $2.2 million in 2015 and 2014, respectively. During 2016, other charges (income), net includes a one-time non-cash pension settlement charge of $8.2 million related to a lump sum offering to former employees of our U.S. pension plan, as well as $1.1 million of acquisition transaction costs. Other charges (income), net also includes (gains) losses from foreign currency transactions and hedging activity, interest income, and other items.
Interest expense and taxes
Interest expense was $28.0 million for 2016, compared to $27.5 million for 2015 and $24.5 million for 2014.
Our annual effective tax rate was 24% for 2016, 2015, and 2014. Our consolidated income tax rate is lower than the U.S. statutory rate primarily because of benefits from lower-taxed non-U.S. operations. The most significant of these lower-taxed operations are in Switzerland and China.
Results of Operations — by Operating Segment
The following is a discussion of the financial results of our operating segments. We currently have five reportable segments: U.S. Operations, Swiss Operations, Western European Operations, Chinese Operations, and Other. A more detailed description of these segments is outlined in Note 17 to our audited consolidated financial statements.
U.S. Operations (amounts in thousands)
 
2016
 
2015
 
2014
 
Increase
(Decrease) in %
2016 vs. 2015
 
Increase
(Decrease) in %
2015 vs. 2014
Net sales
$
958,542

 
$
913,842

 
$
847,706

 
5%
 
8%
Net sales to external customers
$
867,962

 
$
826,354

 
$
757,243

 
5%
 
9%
Segment profit
$
161,539

 
$
147,491

 
$
123,278

 
10%
 
20%
The increase in total net sales and net sales to external customers of 5% in 2016 reflects solid sales growth in most product categories against difficult comparisons in the previous year. Net sales in our U.S. operations also benefited approximately 1% from the Troemner acquisition during 2016.
Segment profit increased $14.0 million in our U.S. Operations segment during 2016, compared to an increase of $24.2 million during 2015. The increase in segment profit during 2016 is primarily related to increased sales and benefits from our margin expansion initiatives, offset in part by increased cash incentive expense and sales and service investments.
Swiss Operations (amounts in thousands)
 
2016
 
2015
 
2014
 
Increase
(Decrease) in %
 (1)
2016 vs. 2015
 
Increase
(Decrease) in %
(1)
2015 vs. 2014
Net sales
$
655,657

 
$
632,326

 
$
687,541

 
4%
 
(8)%
Net sales to external customers
$
130,674

 
$
133,684

 
$
137,756

 
(2)%
 
(3)%
Segment profit
$
163,663

 
$
160,763

 
$
149,987

 
2%
 
7%
(1)
Represents U.S. dollar growth for net sales and segment profit.

33

Table of Contents

Total net sales in U.S. dollars increased 4% in 2016 and decreased 8% in 2015, and in local currencies increased 5% in 2016 and decreased 2% in 2015. Net sales to external customers in U.S. dollars decreased 2% in 2016 and 3% in 2015, and in local currencies decreased 1% in 2016 and increased 1% in 2015. The decrease in local currency net sales to external customers during 2016 primarily relates to soft market conditions in Switzerland.
Segment profit increased $2.9 million in our Swiss Operations segment during 2016, compared to an increase of $10.8 million during 2015. Segment profit includes increased inter-segment sales, benefits from our cost savings programs and reduced material costs, offset by the impact of lower currency hedging gains in the current year.
Western European Operations (amounts in thousands)
 
2016
 
2015
 
2014
 
Increase
(Decrease) in %
(1)
2016 vs. 2015
 
Increase
(Decrease) in %
 (1)
2015 vs. 2014
Net sales
$
817,059

 
$
785,660

 
$
903,052

 
4%
 
(13)%
Net sales to external customers
$
640,558

 
$
620,128

 
$
708,755

 
3%
 
(13)%
Segment profit
$
123,507

 
$
107,424

 
$
119,603

 
15%
 
(10)%
(1)
Represents U.S. dollar growth for net sales and segment profit.
Total net sales in U.S. dollars increased 4% in 2016 and decreased 13% in 2015, and in local currencies increased 7% in 2016 and 2% in 2015. Net sales to external customers in U.S. dollars increased 3% in 2016 and decreased 13% in 2015, and in local currencies increased 5% in 2016 and 3% in 2015. The increase in local currency net sales to external customers during 2016 includes strong growth in laboratory-related products and related services and food retailing products.
Segment profit increased $16.1 million in our Western European Operations segment during 2016, compared to a decrease of $12.2 million in 2015. Segment profit increased primarily due to increased sales, benefits from our margin expansion and cost savings initiatives and favorable currency translation fluctuations, offset by sales and service investments.
Chinese Operations (amounts in thousands)
 
2016
 
2015
 
2014
 
Increase
(Decrease) in %
 (1)
2016 vs. 2015
 
Increase
(Decrease) in %
 (1)
2015 vs. 2014
Net sales
$
606,307

 
$
591,178

 
$
579,557

 
3%
 
2%
Net sales to external customers
$
386,541

 
$
376,291

 
$
415,474

 
3%
 
(9)%
Segment profit
$
187,924

 
$
165,532

 
$
163,832

 
14%
 
1%
(1)
Represents U.S. dollar growth for net sales and segment profit.
Total net sales in U.S. dollars increased 3% in 2016 and increased 2% in 2015, and in local currencies increased 10% in 2016 and 3% in 2015. Net sales to external customers in U.S. dollars increased 3% in 2016 and decreased 9% in 2015, and in local currencies increased 9% in 2016 and decreased 8% in 2015. The increase in net sales to external customers during 2016 includes growth in most product categories with particularly strong growth in laboratory-related products and related services and food retailing products. While we were pleased with our 2016 local currency sales growth in China, the outlook remains uncertain due to overcapacity in a number of industries and volatility in credit availability.
Segment profit increased $22.4 million in our Chinese Operations segment during 2016, compared to an increase of $1.7 million in 2015. The increase in segment profit during 2016 includes increased local currency sales and benefits from our cost savings initiatives.

34

Table of Contents

Other (amounts in thousands)
 
2016
 
2015
 
2014
 
Increase
(Decrease) in %
 (1)
2016 vs. 2015
 
Increase
(Decrease) in %
 (1)
2015 vs. 2014
Net sales
$
490,231

 
$
447,077

 
$
474,282

 
10%
 
(6)%
Net sales to external customers
$
482,522

 
$
438,990

 
$
466,755

 
10%
 
(6)%
Segment profit
$
64,060

 
$
50,821

 
$
52,869

 
26%
 
(4)%
(1)
Represents U.S. dollar growth for net sales and segment profit.
Other includes reporting units in Southeast Asia, Latin America, Eastern Europe and other countries. Total net sales and net sales to external customers in U.S. dollars increased 10% in 2016 and decreased 6% in 2015, and in local currencies increased 12% and 5% in 2016 and 2015, respectively. The increase in local currency total net sales and net sales to external customers includes strong growth in several countries.
Segment profit increased $13.2 million in our Other segment during 2016, compared to a decrease of $2.0 million during 2015. The increase in segment profit during 2016 is primarily related to the increased sales, offset in part by sales and service investments.
Liquidity and Capital Resources
Liquidity is our ability to generate sufficient cash flows from operating activities to meet our obligations and commitments. In addition, liquidity includes the ability to obtain appropriate financing. Currently, our financing requirements are primarily driven by working capital requirements, capital expenditures, share repurchases, and acquisitions. Global market conditions are uncertain, and our ability to generate cash flows could be reduced by a deterioration in global market conditions.
Cash provided by operating activities totaled $443.1 million in 2016, compared to $426.9 million in 2015 and $418.9 million in 2014. The increase in 2016 includes higher net earnings, partly offset by increased working capital that is primarily related to our increased local currency sales.
Capital expenditures are made primarily for investments in information systems and technology, machinery, equipment, and the purchase and expansion of facilities. Our capital expenditures totaled $124.0 million in 2016, $82.5 million in 2015, and $89.4 million in 2014. The 2016 amount includes a $37 million purchase of our previously leased pipette manufacturing facility. We also expect to make net investments in new or expanded manufacturing facilities of $65 million to $75 million over the next two years.
Cash flows used in financing activities during 2016 included share repurchases. As further described below, in accordance with our share repurchase plan, we repurchased 1,348,507 shares and 1,556,797 shares in the amount of $500 million and $495 million during 2016 and 2015, respectively.
We continue to explore potential acquisitions. In connection with any acquisition, we may incur additional indebtedness. As further described in Note 3 of our Consolidated Financial Statements, in the third quarter of 2016, we acquired substantially all of the assets of Henry Troemner, LLC, (Troemner) a supplier of lab equipment, weights and weight calibration based in the United States for an aggregate purchase price of $95.8 million that will be included into our laboratory instrument offering.
In 2016, we also incurred additional acquisition payments totaling $15.6 million.
We plan to repatriate earnings from China, Switzerland, Germany, Luxembourg, the United Kingdom, and certain other countries in future years and expect the only additional cost associated with the repatriation of such foreign earnings will be withholding taxes. All other undistributed earnings are considered to be permanently reinvested. As of December 31, 2016, we had an immaterial amount of cash

35

Table of Contents

and cash equivalents in foreign subsidiaries where undistributed earnings are considered permanently reinvested. Accordingly, we believe the tax impact associated with repatriating our undistributed foreign earnings will not have a material effect on our liquidity.
Senior Notes
As further described in Note 9 of our Consolidated Financial Statements, we have the following Senior Notes.
In 2012, we issued and sold $50 million of 3.67% Senior Notes due December 17, 2022 in a private placement. The 3.67% Senior Notes are senior unsecured obligations of the Company. Interest is payable semi-annually in June and December.
In 2013, we issued and sold $50 million of 4.10% Senior Notes due September 19, 2023 in a private placement. The 4.10% Senior Notes are senior unsecured obligations of the Company. Interest on the 4.10% Senior Notes is payable semi-annually in March and September of each year, beginning in March 2014.
In 2014, we entered into an agreement to issue and sell $250 million of ten-year Senior Notes in a private placement. We issued $125 million with a fixed interest rate of 3.84% ("3.84% Senior Notes") in September 2014 and issued $125 million with a fixed interest rate of 4.24% ("4.24% Senior Notes") in June 2015. The Senior Notes are senior unsecured obligations of the Company. Interest on the 3.84% Senior Notes is payable semi-annually in March and September each year, beginning in March 2015. Interest on the 4.24% Senior Notes is payable semi-annually in June and December each year, beginning in December 2015. The 4.24% Senior Notes were used to repay $100 million of 6.30% Senior Notes which were due June 25, 2015.
In 2015, we issued in a private placement Euro 125 million fifteen-year Senior Notes with a fixed interest rate of 1.47% ("1.47% Euro Senior Notes"). The Euro Senior Notes are senior unsecured obligations of the Company. We have designated the 1.47% Euro Senior Notes as a hedge of a portion of our net investment in a euro denominated foreign subsidiary to reduce foreign currency translation risk associated with this net investment. Changes in the carrying value of this debt resulting from fluctuations in the euro to U.S. dollar exchange rate are recorded as foreign currency translation adjustments within other comprehensive income (loss). We recorded an unrealized gain in other comprehensive income (loss) related to this net investment hedge of $5.1 million and $3.6 million for the years ended December 31, 2016 and 2015, respectively.
Credit Agreement
In 2015, we entered into an $800 million Amended Credit Agreement (the "Credit Agreement"), which replaced our $800 million Amended and Restated Credit Agreement (the "Prior Credit Agreement"). The Credit Agreement is provided by a group of financial institutions (similar to our Prior Credit Agreement) and has a maturity date of December 17, 2020. It is a revolving credit facility and is not subject to any scheduled principal payments prior to maturity. The obligations under the Credit Agreement are unsecured.
Borrowings under the Credit Agreement bear interest at current market rates plus a margin based on our consolidated leverage ratio, which was, as of December 31, 2016, set at LIBOR plus 87.5 basis points. We must also pay facility fees that are tied to our leverage ratio. As of December 31, 2016, approximately $399.6 million was available under the facility.

36

Table of Contents

Our short-term borrowings and long-term debt consisted of the following at December 31, 2016:
 
U.S. Dollar
 
Other Principal
Trading Currencies
 
Total
$50 million Senior Notes, interest at 3.67%, due December 17, 2022
$
50,000

 
$

 
$
50,000

$50 million Senior Notes, interest 4.10%, due September 19, 2023
50,000

 

 
50,000

$125 million Senior Notes, interest 3.84%, due September 19, 2024
125,000

 

 
125,000

$125 million Senior Notes, interest 4.24%, due June 25, 2025
125,000

 

 
125,000

Euro 125 million Senior Notes, interest 1.47%, due June 17, 2030

 
131,507

 
131,507

Debt issuance costs, net
(1,257
)
 
(385
)
 
(1,642
)
Total Senior Notes
348,743

 
131,122

 
479,865

$800 million Credit Agreement, interest at LIBOR plus 87.5 basis points
338,541

 
56,650

 
395,191

Other local arrangements
304

 
18,670

 
18,974

Total debt
687,588

 
206,442

 
894,030

Less: current portion
(304
)
 
(18,670
)
 
(18,974
)
Total long-term debt
$
687,284

 
$
187,772

 
$
875,056

Changes in exchange rates between the currencies in which we generate cash flow and the currencies in which our borrowings are denominated affect our liquidity. In addition, because we borrow in a variety of currencies, our debt balances fluctuate due to changes in exchange rates. Further, we do not have any downgrade triggers relating to ratings from rating agencies that would accelerate the maturity dates of our debt.
We currently believe that cash flows from operating activities, together with liquidity available under our Credit Agreement and local working capital facilities, will be sufficient to fund currently anticipated working capital needs and capital spending requirements for at least the foreseeable future.
Contractual Obligations
The following summarizes certain of our contractual obligations at December 31, 2016 and the effect such obligations are expected to have on our liquidity and cash flows in future periods. We do not have significant outstanding letters of credit or other financial commitments.
 
Payments Due by Period
 
Total
 
Less than 1 Year
 
1-3 Years
 
3-5 Years
 
After 5 Years
Short and long-term debt
$
895,672

 
$
18,974

 
$

 
$

 
$
876,698

Interest on debt
189,903

 
26,383

 
55,157

 
55,075

 
53,288

Non-cancelable operating leases
111,388

 
30,177

 
43,419

 
23,675

 
14,117

Pension and post-retirement funding(1)
19,501

 
19,501

 

 

 

Purchase obligations
65,054

 
61,329

 
3,725

 

 

Total(1)
$
1,281,518

 
$
156,364

 
$
102,301

 
$
78,750

 
$
944,103

(1)
In addition to the above table, we also have liabilities for pension and post-retirement funding and income taxes. However, we cannot determine the timing or the amounts for income taxes or the timing and amounts beyond 2017 for pension and post-retirement funding.
We have purchase commitments for materials, supplies, services, and fixed assets in the normal course of business. Due to the proprietary nature of many of our materials and processes, certain supply contracts contain penalty provisions. We do not expect potential payments under these provisions to materially affect our results of operations or financial condition. This conclusion is based upon reasonably likely outcomes derived by reference to historical experience and current business plans.

37

Table of Contents

Share Repurchase Program
We have a share repurchase program of which there was $983.4 million common shares remaining to be repurchased under the program as of December 31, 2016. The share repurchases are expected to be funded from cash balances, borrowings, and cash generated from operating activities. Repurchases will be made through open market transactions, and the amount and timing of purchases will depend on business and market conditions, the stock price, trading restrictions, the level of acquisition activity, and other factors.
We have purchased 26.0 million common shares since the inception of the program in 2004 through December 31, 2016, at a total cost of $3.5 billion. During the years ended December 31, 2016 and 2015, we spent $500 million and $495 million on the repurchase of 1,348,507 shares and 1,556,797 shares at an average price per share of $370.75 and $317.92, respectively. We reissued 278,623 shares and 403,908 shares held in treasury for the exercise of stock options and restricted stock units during 2016 and 2015, respectively.
Off-Balance Sheet Arrangements
Currently, we have no off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures, or capital resources that is material.
Effect of Currency on Results of Operations
Our earnings are affected by changing exchange rates. We are most sensitive to changes in the exchange rates between the Swiss franc, euro, and U.S. dollar. We have more Swiss franc expenses than we do Swiss franc sales because we develop and manufacture products in Switzerland that we sell globally and have a number of corporate functions located in Switzerland. When the Swiss franc strengthens against our other trading currencies, particularly the U.S. dollar and euro, our earnings go down. We also have significantly more sales in the euro than we do expenses. When the euro weakens against the U.S. dollar and Swiss franc, our earnings also go down.
We entered into foreign currency forward contracts that reduce our exposure from the Swiss franc strengthening against the euro through 2016. Absent these foreign currency forward contracts, we estimate a 1% strengthening of the Swiss franc against the euro would reduce our earnings before tax by approximately $1.5 million to $1.7 million annually. We also estimate a 1% strengthening of the Swiss franc against the U.S. dollar would reduce our earnings before tax by approximately $0.2 million annually in addition to the previously mentioned strengthening of the Swiss franc against the euro impact.
We also conduct business in many geographies throughout the world, including Asia Pacific, the United Kingdom, Eastern Europe, Latin America, and Canada. Fluctuations in these currency exchange rates against the U.S. dollar can also affect our operating results. The most significant of these currency exposures is the Chinese Renminbi. The impact on our earnings before tax of the Chinese Renminbi weakening 1% against the U.S. dollar is a reduction of approximately $0.4 million to $0.6 million annually.
Over the past two years, the U.S. dollar strengthened against most of the major currencies throughout the world. The strength of the U.S. dollar may have a significant negative impact on the Company’s financial performance in the future.
In addition to the effects of exchange rate movements on operating profits, our debt levels can fluctuate due to changes in exchange rates, particularly between the U.S. dollar and the Euro. Based on our outstanding debt at December 31, 2016, we estimate that a 10% weakening of the U.S. dollar against the

38

Table of Contents

currencies in which our debt is denominated would result in an increase of approximately $23.0 million in the reported U.S. dollar value of our debt.
Taxes
We are subject to taxation in many jurisdictions throughout the world. Our effective tax rate and tax liability will be affected by a number of factors, such as changes in law, the amount of taxable income in particular jurisdictions, the tax rates in such jurisdictions, tax treaties between jurisdictions, the extent to which we transfer funds between jurisdictions, and earnings repatriations between jurisdictions. Generally, the tax liability for each taxpayer within the group is determined either (i) on a non-consolidated/non-combined basis or (ii) on a consolidated/combined basis only with other eligible entities subject to tax in the same jurisdiction, in either case without regard to the taxable losses of non-consolidated/non-combined affiliated legal entities.
Environmental Matters
We are subject to environmental laws and regulations in the jurisdictions in which we operate. We own or lease a number of properties and manufacturing facilities around the world. Like many of our competitors, we have incurred, and will continue to incur, capital and operating expenditures and other costs in complying with such laws and regulations.
We are currently involved in, or have potential liability with respect to, the remediation of past contamination in certain of our facilities. A former subsidiary of Mettler-Toledo, LLC known as Hi-Speed Checkweigher Co., Inc. was one of two private parties ordered by the New Jersey Department of Environmental Protection, in an administrative consent order signed on June 13, 1988, to investigate and remediate certain ground water contamination at a property in Landing, New Jersey. After the other party under this order failed to fulfill its obligations, Hi-Speed became solely responsible for compliance with the order. Residual ground water contamination at this site is now within a Classification Exception Area which the Department of Environmental Protection has approved and within which the Company oversees monitoring of the decay of contaminants of concern. A concurrent Well Restriction Area also exists for the site. The Department of Environmental Protection does not view these vehicles as remedial measures, but rather as “institutional controls” that must be adequately maintained and periodically evaluated. We estimate that the costs of compliance associated with the site over the next several years will approximate a total of $0.4 million.
In addition, certain of our present and former facilities have or had been in operation for many decades and, over such time, some of these facilities may have used substances or generated and disposed of wastes which are or may be considered hazardous. It is possible that these sites, as well as disposal sites owned by third parties to which we have sent wastes, may in the future be identified and become the subject of remediation. Although we believe that we are in substantial compliance with applicable environmental requirements and, to date, we have not incurred material expenditures in connection with environmental matters, it is possible that we could become subject to additional environmental liabilities in the future that could have a material adverse effect on our financial condition, results of operations, or cash flows.
Inflation
Inflation can affect the costs of goods and services that we use, including raw materials to manufacture our products. The competitive environment in which we operate limits somewhat our ability to recover higher costs through increased selling prices.
Moreover, there may be differences in inflation rates between countries in which we incur the major portion of our costs and other countries in which we sell products, which may limit our ability to recover

39

Table of Contents

increased costs. We remain committed to operations in China, Eastern Europe, India and Brazil, which have experienced inflationary conditions. To date, inflationary conditions have not had a material effect on our operating results. However, as our presence in China, Eastern Europe, India and Brazil increases, these inflationary conditions could have a greater impact on our operating results.
Quantitative and Qualitative Disclosures about Market Risk
We have only limited involvement with derivative financial instruments and do not use them for trading purposes.
We have entered into foreign currency forward contracts to hedge certain forecasted intercompany sales and to economically hedge short-term intercompany balances with our international businesses on a monthly basis. Such contracts limit our exposure to both favorable and unfavorable currency fluctuations. The net fair value of the foreign currency contracts hedging short-term intercompany balances was a $1.3 million net liability at December 31, 2016. A sensitivity analysis to changes on the foreign currency-denominated contracts indicates that if the primary currency (primarily U.S. dollar, Swiss franc, and the euro) declined by 10%, the fair value of derivatives not designated as hedging instruments would increase by $0.2 million at December 31, 2016. Any resulting changes in fair value would be offset by changes in the underlying economic position. The sensitivity analysis assumes a parallel shift in foreign currency exchange rates. The assumption that exchange rates change in parallel fashion may overstate the impact of changing exchange rates on assets and liabilities denominated in a foreign currency. We also have other currency risks as described under “Effect of Currency on Results of Operations.”
We have entered into certain interest rate swap agreements. These contracts are more fully described in Note 5 to our audited consolidated financial statements. The fair value of these contracts was a net loss of $3.6 million at December 31, 2016. Based on our agreements outstanding at December 31, 2016, a 100-basis-point increase in interest rates would result in an increase in the net aggregate market value of these instruments of $6.7 million. Conversely, a 100-basis-point decrease in interest rates would result in a $7.0 million decrease in the net aggregate market value of these instruments at December 31, 2016. Any change in fair value would not affect our consolidated statement of operations unless such agreements and the debt they hedge were prematurely settled.
Critical Accounting Policies
Management’s discussion and analysis of our financial condition and results of operations is based upon our audited consolidated financial statements, which have been prepared in accordance with U.S. GAAP. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to pensions and other post-retirement benefits, trade accounts receivable, inventories, intangible assets, income taxes, and revenue. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our audited consolidated financial statements. For a detailed discussion on the application of these and other accounting policies, see Note 2 to our audited consolidated financial statements.

40

Table of Contents

Employee benefit plans
The net periodic pension cost for 2016 and projected benefit obligation as of December 31, 2016 were $12.6 million and $138.2 million, respectively, for our U.S. pension plan. The net periodic cost for 2016 and projected benefit obligation as of December 31, 2016 were $7.2 million and $838.3 million, respectively, for our international pension plans. The net periodic post-retirement benefit for 2016 and expected post-retirement benefit obligation as of December 31, 2016 for our U.S. post-retirement medical benefit plan were $4.5 million and $3.0 million, respectively.
Pension and post-retirement benefit plan expense and obligations are developed from assumptions utilized in actuarial valuations. The most significant of these assumptions include the discount rate and expected return on plan assets. In accordance with U.S. GAAP, actual results that differ from the assumptions are accumulated and deferred over future periods. While management believes the assumptions used are appropriate, differences in actual experience or changes in assumptions may affect our plan obligations and future expense.
The expected rates of return on the various defined benefit pension plans’ assets are based on the asset allocation of each plan and the long-term projected return of those assets, which represent a diversified mix of U.S. and international corporate equities and government and corporate debt securities. In 2002, we froze our U.S. defined benefit pension plan and discontinued our retiree medical program for certain current and all future employees. Consequently, no significant future service costs will be incurred on these plans. For 2016, the weighted average return on assets assumption was 6.75% for the U.S. plan and 4.1% for the international plans. A change in the rate of return of 1% would impact annual benefit plan expense by approximately $6.3 million after tax.
The discount rates for defined benefit and post-retirement plans are set by benchmarking against high-quality corporate bonds. For 2016, the average discount rate assumption was 4.0% for the U.S. plan and 1.0% for the international plans, representing a weighted average of local rates in countries where such plans exist. A change in the discount rate of 1% would impact annual benefit plan expense by approximately $11.6 million after tax.
In early 2016, in order to reduce the size and potential volatility of our U.S. defined benefit pension plan obligation, we offered approximately 700 former employees who have deferred vested pension plan benefits a one-time option to receive a lump sum distribution of their benefits. Based upon the eligible participant acceptance, $14.6 million was paid from plan assets to these former employees in the second quarter of 2016 with a corresponding decrease in the benefit obligation. The Company incurred a one-time non-cash settlement charge recorded in other charges (income), net during the second quarter of 2016 of approximately $8.2 million, of which $8.0 million, $4.9 million after tax, was reclassified from accumulated other comprehensive income.
Equity-based compensation
We also have an equity incentive plan that provides for the grant of stock options, restricted stock units, and other equity-based awards which are accounted for and recognized in the consolidated statement of operations based on the grant-date fair value of the award. This methodology yields an estimate of fair value based in part on a number of management estimates, the most significant of which include future volatility and estimated option lives. Changes in these assumptions could significantly impact the estimated fair value of stock options.

41

Table of Contents

Trade accounts receivable
As of December 31, 2016, trade accounts receivable were $455.0 million, net of a $14.2 million allowance for doubtful accounts.
Trade accounts receivable are recorded at the invoiced amount and do not bear interest. The allowance for doubtful accounts represents our best estimate of probable credit losses in our existing trade accounts receivable. We determine the allowance based upon a review of both specific accounts for collection and the age of the accounts receivable portfolio.
Inventories
As of December 31, 2016, inventories were $222.0 million.
We record our inventory at the lower of cost or net realizable value. Cost, which includes direct materials, labor, and overhead, is generally determined using the first in, first out (FIFO) method. The estimated net realizable value is based on assumptions for future demand and related pricing. Adjustments to the cost basis of our inventory are made for excess and obsolete items based on usage, orders, and technological obsolescence. If actual market conditions are less favorable than those projected by management, reductions in the value of inventory may be required.
Goodwill and other intangible assets
As of December 31, 2016, our consolidated balance sheet included goodwill of $476.4 million and other intangible assets of $167.1 million.
Our business acquisitions typically result in goodwill and other intangible assets, which affect the amount of future period amortization expense and possible impairment expense. The determination of the value of such intangible assets requires management to make estimates and assumptions that affect our consolidated financial statements.
In accordance with U.S. GAAP, our goodwill and indefinite-lived intangible assets are not amortized, but are evaluated for impairment annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that an asset might be impaired. The annual evaluation for goodwill and indefinite-lived intangible assets are generally based on an assessment of qualitative factors to determine whether it is more likely than not that the fair value of the asset is less than its carrying amount.
If we are unable to conclude that the goodwill asset is not impaired after considering the totality of events and circumstances during our qualitative assessment, we perform the first step of the two-step impairment test by estimating the fair value of the goodwill asset and comparing the fair value to the carrying amount of the goodwill asset. If the carrying amount of the goodwill asset exceeds its fair value, then we perform the second step of the impairment test to measure the amount of the impairment loss, if any.
If we are unable to conclude that the indefinite-lived intangible asset is not impaired after considering the totality of events and circumstances, we perform an impairment test to measure the amount of the impairment loss, if any.
Both the qualitative and quantitative evaluations consider operating results, business plans, economic conditions and market data, among other factors. There are inherent uncertainties related to these factors and our judgment in applying them to the impairment analyses. Our assessments to date have indicated that there has been no impairment of these assets.
Should any of these estimates or assumptions change, or should we incur lower than expected operating performance or cash flows, including from a prolonged economic slowdown, we may

42

Table of Contents

experience a triggering event that requires a new fair value assessment for our reporting units, possibly prior to the required annual assessment. These types of events and resulting analysis could result in impairment charges for goodwill and other indefinite-lived intangible assets if the fair value estimate declines below the carrying value.
Our amortization expense related to intangible assets with finite lives may materially change should our estimates of their useful lives change.
Income taxes
Income tax expense, deferred tax assets and liabilities, and reserves for unrecognized tax benefits reflect management’s assessment of estimated future taxes to be paid on items in the consolidated financial statements. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of the net recorded amount, an adjustment to the deferred tax asset would increase income or equity in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of the net deferred tax asset in the future, an adjustment to the deferred tax asset would be charged to income in the period such determination was made.
We plan to repatriate earnings from China, Switzerland, Germany, Luxembourg, the United Kingdom, and certain other countries in future years and expect the only additional cost associated with the repatriation of such earnings outside the United States will be withholding taxes. All other undistributed earnings are considered permanently reinvested.
The significant assumptions and estimates described in the preceding paragraphs are important contributors to our ultimate effective tax rate for each year in addition to our income mix from geographical regions. If any of our assumptions or estimates were to change, or should our income mix from our geographical regions change, our effective tax rate could be materially affected. Based on earnings before taxes of $504.2 million for the year ended December 31, 2016, each increase of $5.0 million in tax expense would increase our effective tax rate by 1%.
Revenue recognition
Revenue is recognized when title to a product has transferred and any significant customer obligations have been fulfilled. Standard shipping terms are generally FOB shipping point in most countries and, accordingly, title and risk of loss transfers upon shipment. In countries where title cannot legally transfer before delivery, the Company defers revenue recognition until delivery has occurred. The Company generally maintains the right to accept or reject a product return in its terms and conditions and also maintains appropriate accruals for outstanding credits. Shipping and handling costs charged to customers are included in total net sales and the associated expense is recorded in cost of sales for all periods presented. Other than a few small software applications, the Company does not sell software products without the related hardware instrument as the software is embedded in the instrument. The Company’s products typically require no significant production, modification, or customization of the hardware or software that is essential to the functionality of the products. To the extent the Company’s solutions have a significant post-shipment obligation, revenue is deferred until the obligation has been completed. The Company defers product revenue where installation is required, unless such installation is deemed perfunctory. The Company also sometimes enters into certain arrangements that require the separate delivery of multiple goods and/or services. These deliverables are accounted for separately if the deliverables have stand-alone value and the performance of undelivered items is probable and within the Company's control. The allocation of revenue between the separate deliverables is typically based on the

43

Table of Contents

relative selling price at the time of the sale in accordance with a number of factors including service technician billing rates, time to install, and geographic location.
Certain products are also sold through indirect distribution channels whereby the distributor assumes any further obligations to the customer upon title transfer. Revenue is recognized on these products upon transfer of title and risk of loss to distributors. Distributor discounts are offset against revenue at the time such revenue is recognized.
Service revenue not under contract is recognized upon the completion of the service performed. Spare parts sold on a stand-alone basis are recognized upon title and risk of loss transfer which is generally at the time of shipment. Revenues from service contracts are recognized ratably over the contract period. These contracts represent an obligation to perform repair and other services including regulatory compliance qualification, calibration, certification, and preventative maintenance on a customer’s pre-defined equipment over the contract period. Service contracts are separately priced and payment is typically received from the customer at the beginning of the contract period.
New Accounting Pronouncements
See Note 2 to the audited consolidated financial statements.

Item 7A.
Quantitative and Qualitative Disclosures about Market Risk
Discussion of this item is included in Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Item 8.
Financial Statements and Supplementary Data
The financial statements required by this item are set forth starting on page F-1 and the related financial schedule is set forth on page S-1.

Item 9.
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
None.

Item 9A.
Controls and Procedures
Conclusions Regarding the Effectiveness of Disclosure Controls and Procedures
Under the supervision and with the participation of our management, including the Chief Executive Officer, Principal Financial Officer, and Principal Accounting Officer, we have evaluated the effectiveness of our disclosure controls and procedures as required by Exchange Act Rule 13a-15(b) as of the end of the period covered by this report. Based upon that evaluation, the Chief Executive Officer, Principal Financial Officer, and Principal Accounting Officer have concluded that these disclosure controls and procedures are effective.

44

Table of Contents

Management’s Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of the Company’s financial statements for external reporting purposes in accordance with accounting principles generally accepted in the United States of America.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies or procedures may deteriorate.
Management assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2016. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework (2013). Based on our assessment, we concluded that, as of December 31, 2016, the Company’s internal control over financial reporting is effective.
PricewaterhouseCoopers LLP, an independent registered public accounting firm that audited the financial statements included in this Report on Form 10-K, has issued their integrated audit report which covers our internal control over financial reporting which appears on page F-2.
Changes in Internal Control over Financial Reporting
There were no changes in our internal control over financial reporting during the quarter ended December 31, 2016 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B.
Other Information
None.

45

Table of Contents

PART III

Item 10.
Directors, Executive Officers, and Corporate Governance
The executive officers of the Company are set forth below. Officers are appointed by the Board of Directors and serve at the discretion of the Board.
Name
 
Age
 
Position
Olivier A. Filliol
 
50
 
President and Chief Executive Officer
Thomas Caratsch
 
58
 
Head of Laboratory
Marc de La Guéronnière
 
53
 
Head of European and North American Market Organizations
William P. Donnelly
 
55
 
Executive Vice President
Michael Heidingsfelder
 
56
 
Head of Industrial
Simon Kirk
 
57
 
Head of Product Inspection
Christian Magloth
 
51
 
Head of Human Resources
Waldemar Rauch
 
54
 
Head of Process Analytics
Shawn P. Vadala
 
48
 
Chief Financial Officer
Olivier A. Filliol has been a director since January 2009. He has been President and Chief Executive Officer of the Company since January 1, 2008. Mr. Filliol served as Head of Global Sales, Service, and Marketing of the Company from April 2004 to December 2007, and Head of Process Analytics of the Company from June 1999 to December 2007. From June 1998 to June 1999, he served as General Manager of the Company’s U.S. checkweighing operations. Prior to joining the Company, he was a Strategy Consultant with the international consulting firm Bain & Company, working in the Geneva, Paris, and Sydney offices.
Thomas Caratsch has been Head of Laboratory of the Company since January 2008. From October 2007 to December 2007, he served as the Head of Business Development. Prior to joining the Company in October 2007, he held various management positions with Hoffmann La Roche from 1987 to March 2007, including General Manager of Roche Instrument Center AG / Tegimenta AG and Head of Disetronic Medical Systems AG from January 2003 to August 2006.
Marc de La Guéronnière has been Head of European Market Organizations of the Company since January 2008 and Head of North American Market Organizations since April 2014. He was Head of Region South and General Manager of the Company’s market organization in Spain from January 2006 to January 2008. He joined the Company in 2001 as the Industrial Business Area Manager for our market organization in France. Prior to joining the Company, Mr. de La Guéronnière held various management positions in Europe and the United States with ABB-Elsag Bailey and Danaher-Zellweger.
William P. Donnelly joined the Company in 1997 and has been Executive Vice President since January 2014. He previously served as Chief Financial Officer of the Company since 1997, except for a two-year period when he ran the Company’s Product Inspection and Pipette businesses. Mr. Donnelly is responsible for Investor Relations, Finance, Supply Chain Management, Information Technology, and the Company’s Blue Ocean Program.
Michael Heidingsfelder joined the Company in April 2012 as Head of Industrial Division. Prior to joining the Company, Mr. Heidingsfelder held various management positions within the Freudenberg Group from 2004 to March 2012 in Europe, Asia, and the Americas, including Chief Operating Officer, Americas, and General Manager, China. Previously, he was a Partner of Roland Berger Strategy Consultants in the U.S. and Europe.

46

Table of Contents

Simon Kirk joined the Company in January 2012 as Head of Product Inspection. Previously, he worked at Schindler where he served since 2008 as Chief Executive Officer of Jardine Schindler Group, a joint venture responsible for all of Schindler's operations in Southeast Asia. From 2004 until 2008, he was Vice President responsible for Eastern Europe at Schindler. He has also held various management positions at Eaton Corporation, Owens Corning, Imperial Chemical Industries, and British Railways Board.
Christian Magloth joined the Company in October 2010 and has been Head of Human Resources since December 2010. Prior to joining the Company, he served as Head of Human Resources of Straumann, a leading global medical devices company listed on the Swiss stock exchange, from April 2006 to September 2010. He previously served as Head of Human Resources at Hero Group, an international consumer foods company, and in various management positions at Hilti, a leading global construction supply company.
Waldemar Rauch joined the Company in September 2000 as Head of our Ingold business. He has served as Operating Manager since March 2004, was named Head of Process Analytics Division in January 2008, and joined the Group Management Committee in July 2011. Prior to joining the Company, he worked in R&D at Siemens in Germany and held various technical management positions with Atomika Instruments in Germany as well as with Endress + Hauser Flowtec, a leading Swiss supplier of industrial measurement and automation equipment.
Shawn P. Vadala joined the Company in 1997 and has been Chief Financial Officer since January 2014. He is also responsible for the Company's Pricing and Business Intelligence programs. Mr. Vadala previously held various senior financial positions at the Company's Columbus, Ohio and Greifensee, Switzerland offices. Prior to joining the Company, he worked in the Boston and Zurich, Switzerland offices of PricewaterhouseCoopers.
Certifications
Our Chief Executive Officer, Principal Financial Officer, and Principal Accounting Officer also provide certifications pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 in connection with our quarterly and annual financial statement filings with the Securities and Exchange Commission. The certifications relating to this annual report are attached as Exhibits 31.1, 31.2 and 31.3.
The remaining information called for by this item is incorporated by reference from the discussion in the sections “Proposal One: Election of Directors,” “Board of Directors — General Information,” “Board of Directors — Operation,” and “Additional Information — Section 16(a) Beneficial Ownership Reporting Compliance” in the 2017 Proxy Statement.
Item 11.
Executive Compensation
The information appearing in the sections captioned “Board of Directors — General Information — Director Compensation,” “Compensation Discussion and Analysis,” “Compensation Committee Report,” and “Additional Information — Compensation Committee Interlocks and Insider Participation” in the 2017 Proxy Statement is incorporated by reference herein.

Item 12.
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
The information appearing in the section “Share Ownership” in the 2017 Proxy Statement is incorporated by reference herein. Information appearing in “Securities Authorized for Issuance under

47

Table of Contents

Equity Compensation Plans as of December 31, 2016” is included within Note 11 to the financial statements.

Item 13.
Certain Relationships and Related Transactions and Director Independence
Certain Relationships and Related Transactions — None.
Director Independence — The information in the section “Board of Directors — General Information — Independence of the Board” in the 2017 Proxy Statement is incorporated by reference herein.

Item 14.
Principal Accounting Fees and Services
Information appearing in the section “Audit Committee Report” in the 2017 Proxy Statement is hereby incorporated by reference.

PART IV

Item 15.
Exhibits and Financial Statement Schedules
(a) Exhibits, Financial Statements, and Schedules:
1. Financial Statements. See Index to Consolidated Financial Statements included on page F-1.
2. Financial Statement Schedule. See Schedule II, which is included on page S-1.
3. List of Exhibits. See Exhibit Index included on page E-1.

48

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or Section 15(d) of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Mettler-Toledo International Inc.
(Registrant)
Date: February 2, 2017
By: 
/s/ Olivier A. Filliol
 
Olivier A. Filliol
 
President and Chief Executive Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Annual Report on Form 10-K has been signed below by the following persons on behalf of the registrant as of the date set out above and in the capacities indicated.
Signature
 
Title
 
 
 
/s/ Olivier A. Filliol
 
President and Chief Executive Officer
Olivier A. Filliol
 
 
 
 
 
/s/ William P. Donnelly
 
Executive Vice President
William P. Donnelly
 
(Principal Financial Officer)
 
 
 
/s/ Shawn P. Vadala
 
Chief Financial Officer
Shawn P. Vadala
 
(Principal Accounting Officer)
 
 
 
/s/ Olivier A. Filliol
 
Director
Olivier A. Filliol
 
 
 
 
 
/s/ Wah-Hui Chu
 
Director
Wah-Hui Chu
 
 
 
 
 
/s/ Francis A. Contino
 
Director
Francis A. Contino
 
 
 
 
 
/s/ Richard Francis
 
Director
Richard Francis
 
 
 
 
 
/s/ Connie L. Harvey
 
Director
Connie L. Harvey
 
 
 
 
 
/s/ Michael A. Kelly
 
Director
Michael A. Kelly
 
 
 
 
 
/s/ Hans Ulrich Maerki
 
Director
Hans Ulrich Maerki
 
 
 
 
 
/s/ Thomas P. Salice
 
Director
Thomas P. Salice
 
 
 
 
 
/s/ Robert F. Spoerry
 
Director
Robert F. Spoerry
 
 

49

Table of Contents

EXHIBIT INDEX
Exhibit
 
No.
Description
3.1
Amended and Restated Certificate of Incorporation of the Company(1)
3.2
Amended By-laws of the Company, effective as of November 3, 2016(2)
10.1
Credit Agreement among Mettler-Toledo International Inc., certain of its subsidiaries, JPMorgan Chase Bank, N.A., J.P. Morgan Securities LLC and Merrill Lynch, Pierce, Fenner & Smith Incorporated, and certain other financial institutions, dated as of December 17, 2015(3)
10.11
Note Purchase Agreement dated as of October 10, 2012 by and among Mettler-Toledo International Inc., Massachusetts Mutual Life Insurance Company, C.M. Life Insurance Company, MassMutual Asia Limited, The Lincoln National Life Insurance Company, Lincoln Life & Annuity Company of New York and Aviva Life and Annuity Company Royal Neighbors of America.(4)
10.12
Note Purchase Supplement dated July 29, 2013 by and among Mettler-Toledo International Inc., Aviva Life and Annuity Company and Teachers Insurance and Annuity Association of America to a Note Purchase Agreement dated October 10, 2012 by and among Mettler-Toledo International Inc., Massachusetts Mutual Life Insurance Company, C.M. Life Insurance Company, MassMutual Asia Limited, The Lincoln National Life Insurance Company, Lincoln Life & Annuity Company of New York and Aviva Life and Annuity Company Royal Neighbors of America(5)
10.13
Note Purchase Agreement dated as of June 27, 2014 by and among Mettler-Toledo International Inc., Babson Capital Management LLC, Cigna Investments, Inc. and Teachers Insurance and Annuity Association of America. (6)
10.14
Note Purchase Agreement dates as of March 31, 2015 by and among Mettler-Toledo International Inc., Metropolitan Life Insurance Company, MetLife Insurance Company USA, OMI MLIC Investments Limited and Massachusetts Mutual Life Insurance Company.(7)
10.20
Mettler-Toledo International Inc. 2004 Equity Incentive Plan(8)
10.21
Mettler-Toledo International Inc. 2007 Share Plan, effective February 7, 2008(9)
10.22
Mettler-Toledo International Inc. 2013 Equity Incentive Plan(10)
10.23*
10.24*
10.25*
10.26*
10.27*
10.28*
10.31
Regulations of the POBS PLUS — Incentive Scheme for Senior Management of Mettler Toledo, effective as of November, 2006(11)
10.32
Regulations of the POBS PLUS — Incentive Scheme for Members of the Group Management of Mettler Toledo, effective as of January, 2009(11)
10.50
Employment Agreement between Thomas Caratsch and Mettler-Toledo International Inc., dated as of December 4, 2007(9)
10.51
Employment Agreement between Marc de La Guéronnière and Mettler-Toledo International Inc., dated as of January 27, 2011(12)
10.52
Employment Agreement between William Donnelly and Mettler-Toledo GmbH, dated as of November 10, 1997(1)
10.53
Employment Agreement between Olivier Filliol and Mettler-Toledo International Inc., dated as of November 1, 2007(13)
10.54
Employment Agreement between Michael Heidingsfelder and Mettler-Toledo International Inc., dated as of November 30, 2011 (16)
10.55
Employment Agreement between Simon Kirk and Mettler-Toledo International Inc., dated as of November 28, 2011(16)
10.56
Employment Agreement between Christian Magloth and Mettler-Toledo International Inc., dated as of March 22, 2010(12)
10.57
Employment Agreement between Waldemar Rauch and Mettler-Toledo International Inc., dated as of June 10, 2011(15)
10.58
Employment Agreement between Robert Spoerry and Mettler-Toledo International Inc., dated as of November 1, 2007(13)
10.59*
10.60
Form of Tax Equalization Agreement between Messrs. Caratsch, Filliol, Kirk, Magloth, and Spoerry, and Mettler-Toledo International Inc., dated October 10, 2007(9)
10.61
Amendment to Employment Agreement between William Donnelly and Mettler-Toledo International, Inc. dated November 3, 2016 (2)
21*
23.1*

E- 1

Table of Contents

Exhibit
 
No.
Description
31.1*
31.2*
31.3*
32*
101.INS*
XBRL Instance Document
101.SCH*
XBRL Taxonomy Extension Schema Document
101.CAL*
XBRL Taxonomy Extension Calculation Linkbase Document
101.LAB*
XBRL Taxonomy Extension Label Linkbase Document
101.PRE*
XBRL Taxonomy Extension Presentation Linkbase Document
101.DEF*
XBRL Taxonomy Extension Definition Linkbase Document
_______________________________________
(1) 
Incorporated by reference to the Company’s Report on Form 10-K dated March 13, 1998
(2) 
Incorporated by reference to the Company’s Report on Form 8-K dated November 8, 2016
(3) 
Incorporated by reference to the Company’s Report on Form 8-K dated December 18, 2015
(4) 
Incorporated by reference to the Company's Report on Form 8-K dated October 16, 2012
(5) 
Incorporated by reference to the Company's Report on Form 8-K dated July 29, 2013
(6) 
Incorporated by reference to the Company's Report on Form 8-K dated July 2, 2014
(7) 
Incorporated by reference to the Company's Report on Form 8-K dated March 31, 2015
(8) 
Incorporated by reference to the Company’s Form DEF 14-A filed March 29, 2004
(9) 
Incorporated by reference to the Company’s Report on Form 10-K dated February 15, 2008
(10) 
Incorporated by reference to the Company's Registration Statement on Form S-8 dated July 26, 2013 (Reg. No. 333-190181)
(11) 
Incorporated by reference to the Company’s Report on Form 10-K dated February 13, 2009
(12) 
Incorporated by reference to the Company's Report on Form 10-K dated February 16, 2010
(13) 
Incorporated by reference to the Company’s Report on Form 8-K dated November 1, 2007
(14) 
Incorporated by reference to the Company’s Report on Form 10-K dated March 4, 2002
(15) 
Incorporated by reference to the Company's Report on Form 10-K dated February 13, 2012
(16) 
Incorporated by reference to the Company's Report on Form 10-K dated February 8, 2013
*
Filed herewith


E- 2



METTLER-TOLEDO INTERNATIONAL INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 
Page


F - 1

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Shareholders of Mettler-Toledo International Inc.
In our opinion, the consolidated financial statements listed in the index appearing on page F-1 present fairly, in all material respects, the financial position of Mettler-Toledo International Inc. and its subsidiaries at December 31, 2016 and December 31, 2015, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2016 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedules appearing on page S-1 present fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedules, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
As described in note 2 to the consolidated financial statements, the Company changed the manner in which it presents deferred tax assets and liabilities.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/  PricewaterhouseCoopers LLP
PricewaterhouseCoopers LLP
Columbus, Ohio
February 2, 2017


F - 2

Table of Contents

METTLER-TOLEDO INTERNATIONAL INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
For the years ended December 31
(In thousands, except share data)
 
2016
 
2015
 
2014
Net sales
 

 
 

 
 

Products
$
1,957,879

 
$
1,865,884

 
$
1,930,497

Service
550,378

 
529,563

 
555,486

Total net sales
2,508,257

 
2,395,447

 
2,485,983

Cost of sales
 

 
 

 
 

Products
767,753

 
744,867

 
810,547

Service
304,917

 
298,587

 
316,686

Gross profit
1,435,587

 
1,351,993

 
1,358,750

Research and development
119,968

 
119,076

 
123,297

Selling, general, and administrative
732,622

 
700,810

 
728,582

Amortization
36,052

 
30,951

 
29,185

Interest expense
28,026

 
27,451

 
24,537

Restructuring charges
6,235

 
11,148

 
5,915

Other charges (income), net
8,491

 
(867
)
 
2,230

Earnings before taxes
504,193

 
463,424

 
445,004

Provision for taxes
119,823

 
110,604

 
106,763

Net earnings
$
384,370

 
$
352,820

 
$
338,241

 
 
 
 
 
 
Basic earnings per common share:
 

 
 

 
 

Net earnings
$
14.49

 
$
12.75

 
$
11.71

Weighted average number of common shares
26,517,768

 
27,680,918

 
28,890,771

Diluted earnings per common share:
 

 
 

 
 

Net earnings
$
14.22

 
$
12.48

 
$
11.44

Weighted average number of common and common equivalent shares
27,023,905

 
28,269,615

 
29,571,308


The accompanying notes are an integral part of these consolidated financial statements.


F - 3

Table of Contents

METTLER-TOLEDO INTERNATIONAL INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
For the years ended December 31
(In thousands, except share data)

 
2016
 
2015
 
2014
 
 
 
 
 
 
Net earnings
$
384,370

 
$
352,820

 
$
338,241

 
 
 
 
 
 
Other comprehensive income (loss), net of tax:
 
 
 
 
 
Foreign currency translation adjustment
(57,928
)
 
(52,434
)
 
(82,875
)
Unrealized gains (losses) on cash flow hedging arrangements:
 
 
 
 
 
Unrealized gains (losses)
(513
)
 
13,221

 
(768
)
Effective portion of (gains) losses included in net earnings
(4,735
)
 
(8,261
)
 
1,257

Defined benefit pension and post-retirement plans:
 
 
 
 
 
Net actuarial gains (losses)
(47,788
)
 
(30,759
)
 
(106,837
)
Plan amendments and prior service cost

 
9,189

 
1,607

Amortization of actuarial (gains) losses and plan amendments and prior service cost
16,730

 
9,509

 
1,614

          Impact of foreign currency
5,885

 
5,835

 
8,089

Total other comprehensive income (loss), net of tax
(88,349
)
 
(53,700
)
 
(177,913
)
 
 
 
 
 
 
Comprehensive income
$
296,021

 
$
299,120

 
$
160,328


The accompanying notes are an integral part of these consolidated financial statements.


F - 4

Table of Contents

METTLER-TOLEDO INTERNATIONAL INC.
CONSOLIDATED BALANCE SHEETS
As of December 31
(In thousands, except share data)
 
2016
 
2015
ASSETS
Current assets:
 

 
 

Cash and cash equivalents
$
158,674

 
$
98,887

Trade accounts receivable, less allowances of $14,234 in 2016 and $14,435 in 2015
454,988

 
411,420

Inventories
222,047

 
214,383

Other current assets and prepaid expenses
61,075

 
70,642

Total current assets
896,784

 
795,332

Property, plant, and equipment, net
563,707

 
517,229

Goodwill
476,378

 
446,284

Other intangible assets, net
167,055

 
115,252

Deferred tax assets, net
33,951

 
33,051

Other non-current assets
28,902

 
52,187

Total assets
$
2,166,777

 
$
1,959,335

LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
 

 
 

Trade accounts payable
$
146,593

 
$
142,075

Accrued and other liabilities
133,167

 
127,647

Accrued compensation and related items
140,461

 
136,414

Deferred revenue and customer prepayments
100,330

 
88,829

Taxes payable
47,990

 
48,759

Short-term borrowings and current maturities of long-term debt
18,974

 
14,488

Total current liabilities
587,515

 
558,212

Long-term debt
875,056

 
575,138

Deferred tax liabilities, net
64,306

 
50,976

Other non-current liabilities
204,957

 
194,552

Total liabilities
1,731,834

 
1,378,878

Commitments and contingencies (Note 16)


 


Shareholders’ equity:
 

 
 

Preferred stock, $0.01 par value per share; authorized 10,000,000 shares

 

Common stock, $0.01 par value per share; authorized 125,000,000 shares; issued 44,786,011 and 44,786,011 shares, outstanding 26,020,234 and 27,090,118 shares at December 31, 2016 and 2015, respectively
448

 
448

Additional paid-in capital
730,556

 
697,570

Treasury stock at cost (18,765,777 and 17,695,893 shares at December 31, 2016 and 2015, respectively)
(3,006,771
)
 
(2,543,229
)
Retained earnings
3,065,708

 
2,692,317

Accumulated other comprehensive income (loss)
(354,998
)
 
(266,649
)
Total shareholders’ equity
434,943

 
580,457

Total liabilities and shareholders’ equity
$
2,166,777

 
$
1,959,335


The accompanying notes are an integral part of these consolidated financial statements.


F - 5

Table of Contents

METTLER-TOLEDO INTERNATIONAL INC.
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
For the years ended December 31
(In thousands, except share data)
 
Common Stock
 
Additional
Paid-In
Capital
 
Treasury
Stock
 
Retained
Earnings
 
Accumulated
Other
Comprehensive
Income (Loss)
 
Total
 
Shares
 
Amount
 
 
 
 
 
Balance at December 31, 2013
29,487,075

 
$
448

 
$
653,250

 
$
(1,721,030
)
 
$
2,037,420

 
$
(35,036
)
 
$
935,052

Exercise of stock options and restricted stock units
373,431

 

 

 
39,374

 
(18,327
)
 

 
21,047

Repurchases of common stock
(1,617,499
)
 

 

 
(414,000
)
 

 

 
(414,000
)
Tax benefit resulting from exercise of certain employee stock options

 

 
3,557

 

 

 

 
3,557

Share-based compensation

 

 
13,611

 

 

 

 
13,611

Net earnings

 

 

 

 
338,241

 

 
338,241

Other comprehensive income (loss), net of tax

 

 

 

 

 
(177,913
)
 
(177,913
)
Balance at December 31, 2014
28,243,007

 
$
448

 
$
670,418

 
$
(2,095,656
)
 
$
2,357,334

 
$
(212,949
)
 
$
719,595

Exercise of stock options and restricted stock units
403,908

 

 

 
47,393

 
(17,837
)
 

 
29,556

Repurchases of common stock
(1,556,797
)
 

 

 
(494,966
)
 

 

 
(494,966
)
Tax benefit resulting from exercise of certain employee stock options

 

 
12,929

 

 

 

 
12,929

Share-based compensation

 

 
14,223

 

 

 

 
14,223

Net earnings

 

 

 

 
352,820

 

 
352,820

Other comprehensive income (loss), net of tax

 

 

 

 

 
(53,700
)
 
(53,700
)
Balance at December 31, 2015
27,090,118

 
$
448

 
$
697,570

 
$
(2,543,229
)
 
$
2,692,317

 
$
(266,649
)
 
$
580,457

Exercise of stock options and restricted stock units
278,623

 

 

 
36,450

 
(10,979
)
 

 
25,471

Repurchases of common stock
(1,348,507
)
 

 

 
(499,992
)
 

 

 
(499,992
)
Tax benefit resulting from exercise of certain employee stock options

 

 
17,680

 

 

 

 
17,680

Share-based compensation

 

 
15,306

 

 

 

 
15,306

Net earnings

 

 

 

 
384,370

 

 
384,370

Other comprehensive income (loss), net of tax

 

 

 

 

 
(88,349
)
 
(88,349
)
Balance at December 31, 2016
26,020,234

 
$
448

 
$
730,556

 
$
(3,006,771
)
 
$
3,065,708

 
$
(354,998
)
 
$
434,943


The accompanying notes are an integral part of these consolidated financial statements.

F - 6

Table of Contents

METTLER-TOLEDO INTERNATIONAL INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
For the years ended December 31
(In thousands)
 
2016
 
2015
 
2014
Cash flows from operating activities:
 

 
 

 
 

Net earnings
$
384,370

 
$
352,820

 
$
338,241

Adjustments to reconcile net earnings to net cash provided by operating activities:
 
 
 

 
 

Depreciation
32,743

 
33,087

 
33,617

Amortization
36,052

 
30,951

 
29,185

Deferred tax provision
1,878

 
7,137

 
15,362

Excess tax benefits from share-based payment arrangements
(17,680
)
 
(12,929
)
 
(3,557
)
Share-based compensation
15,306

 
14,223

 
13,611

Non-cash pension settlement charge
8,189

 

 

Other
181

 
155

 
211

Increase (decrease) in cash resulting from changes in:
 
 
 

 
 

Trade accounts receivable, net
(52,151
)
 
1,625

 
7,492

Inventories
(12,431
)
 
(18,785
)
 
(9,302
)
Other current assets
291

 
(5,119
)
 
4,392

Trade accounts payable
9,633

 
1,698

 
6,298

Taxes payable
(3,072
)
 
2,879

 
(461
)
Accruals and other
39,769

 
19,126

 
(16,177
)
Net cash provided by operating activities
443,078

 
426,868

 
418,912

Cash flows from investing activities:
 

 
 

 
 

Proceeds from sale of property, plant, and equipment
423

 
949

 
728

Purchase of property, plant, and equipment
(123,957
)
 
(82,506
)
 
(89,388
)
Acquisitions
(111,381
)
 
(13,779
)
 
(5,784
)
Net hedging settlements on intercompany loans
3,459

 
(5,415
)
 
123

Net cash used in investing activities
(231,456
)
 
(100,751
)
 
(94,321
)
Cash flows from financing activities:
 

 
 

 
 

Proceeds from borrowings
905,774

 
741,864

 
628,832

Repayments of borrowings
(594,178
)
 
(594,477
)
 
(585,867
)
Proceeds from exercise of stock options
25,471

 
29,556

 
21,047

Repurchases of common stock
(499,992
)
 
(494,966
)
 
(414,000
)
Excess tax benefits from share-based payment arrangements
17,680

 
12,929

 
3,557

Acquisition contingent consideration paid
(471
)
 
(572
)
 
(859
)
Debt issuance costs
(209
)
 
(1,366
)
 
(941
)
Net cash used in financing activities
(145,925
)
 
(307,032
)
 
(348,231
)
Effect of exchange rate changes on cash and cash equivalents
(5,910
)
 
(5,461
)
 
(2,971
)
Net increase (decrease) in cash and cash equivalents
59,787

 
13,624

 
(26,611
)
Cash and cash equivalents:
 

 
 

 
 

Beginning of period
98,887

 
85,263

 
111,874

End of period
$
158,674

 
$
98,887

 
$
85,263

Supplemental disclosures of cash flow information:
 

 
 

 
 

Cash paid during the year for:
 

 
 

 
 

Interest
$
28,025

 
$
27,303

 
$
23,219

Taxes
$
92,586

 
$
85,458

 
$
95,143

        
The accompanying notes are an integral part of these consolidated financial statements.

F - 7

Table of Contents

METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share data, unless otherwise stated)

1.
BUSINESS DESCRIPTION AND BASIS OF PRESENTATION
Mettler-Toledo International Inc. (“Mettler-Toledo” or the “Company”) is a leading global supplier of precision instruments and services. The Company manufactures weighing instruments for use in laboratory, industrial, packaging, logistics, and food retailing applications. The Company also manufactures several related analytical instruments and provides automated chemistry solutions used in drug and chemical compound discovery and development. In addition, the Company manufactures metal detection and other end-of-line inspection systems used in production and packaging and provides solutions for use in certain process analytics applications. The Company’s primary manufacturing facilities are located in China, Switzerland, the United States, Germany, and the United Kingdom. The Company’s principal executive offices are located in Columbus, Ohio and Greifensee, Switzerland.
The consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”) and include all entities in which the Company has control, which are its wholly-owned subsidiaries.
The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, as well as disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting periods. Actual results may differ from those estimates.
All intercompany transactions and balances have been eliminated.
Certain reclassifications have been made to prior year amounts to conform to the current year presentation.

2.
SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Cash and Cash Equivalents
Cash and cash equivalents include highly liquid investments with original maturity dates of three months or less. The carrying value of these cash equivalents approximates fair value.
Trade Accounts Receivable
Trade accounts receivable are recorded at the invoiced amount and do not bear interest. The allowance for doubtful accounts represents the Company’s best estimate of probable credit losses in its existing trade accounts receivable. The Company determines the allowance based upon a review of both specific accounts for collection and the age of the accounts receivable portfolio.
Inventories
Inventories are valued at the lower of cost or net realizable value. Cost, which includes direct materials, labor and overhead, is generally determined using the first in, first out (FIFO) method. The estimated net realizable value is based on assumptions for future demand and related pricing. Adjustments to the cost basis of the Company’s inventory are made for excess and obsolete items based on usage, orders and technological obsolescence. If actual market conditions are less favorable than those projected by management, reductions in the value of inventory may be required.

F - 8

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


Long-Lived Assets
a)
Property, Plant, and Equipment
Property, plant, and equipment are stated at cost less accumulated depreciation. Repair and maintenance costs are charged to expense as incurred. The Company expenses all internal-use software costs incurred in the preliminary project stage and capitalizes certain direct costs associated with the development and purchase of internal-use software within property, plant, and equipment. Capitalized costs are amortized on a straight-line basis over the estimated useful lives of the software, generally not exceeding 10 years.
Depreciation and amortization are charged on a straight-line basis over the estimated useful lives of the assets as follows:
Buildings and improvements
15 to 50 years
Machinery and equipment
3 to 12 years
Computer software
3 to 10 years
Leasehold improvements
Shorter of useful life or lease term
b)
Goodwill and Other Intangible Assets
Goodwill, representing the excess of purchase price over the net asset value of companies acquired, and indefinite-lived intangible assets are not amortized, but are reviewed for impairment annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that an asset might be impaired. The annual evaluation for goodwill and indefinite-lived intangible assets are generally based on an assessment of qualitative factors to determine whether it is more likely than not that the fair value of the asset is less than its carrying amount.
If the Company is unable to conclude that goodwill asset is not impaired after considering the totality of events and circumstances during its qualitative assessment, the Company performs the first step of the two-step impairment test by estimating the fair value of the goodwill asset and comparing the fair value to the carrying amount of the goodwill asset. If the carrying amount of the goodwill asset exceeds its fair value, then the Company performs the second step of the impairment test to measure the amount of the impairment loss, if any.
If the Company is unable to conclude that the indefinite-lived intangible asset is not impaired after considering the totality of events and circumstances, the Company performs an impairment test to measure the amount of the impairment loss, if any.
Other intangible assets include indefinite-lived assets and assets subject to amortization. Where applicable, amortization is charged on a straight-line basis over the expected period to be benefited. The straight-line method of amortization reflects an appropriate allocation of the cost of the intangible assets to earnings in proportion to the amount of economic benefits obtained by the Company in each reporting period. The Company assesses the initial acquisition of intangible assets in accordance with the provisions of ASC 805 "Business Combinations" and the continued accounting for previously recognized intangible assets and goodwill in accordance with the provisions of ASC 350 "Intangible - Goodwill and Other" and ASC 360 "Property, Plant and Equipment."


F - 9

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


Accounting for Impairment of Long-Lived Assets
The Company assesses the need to record impairment losses on long-lived assets with finite lives when events or changes in circumstances indicate that the carrying amount of assets may not be recoverable. An impairment loss would be recognized when future estimated undiscounted cash flows expected to result from use of the asset are less than the asset’s carrying value, with the loss measured as the difference between carrying value and fair value.
Taxation
The Company files tax returns in each jurisdiction in which it operates. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities, their respective tax bases, and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates in the respective jurisdictions in which the Company operates. In assessing the ability to realize deferred tax assets, management considers whether it is more likely than not that some portion or all of the deferred tax assets will not be realized.
Deferred taxes are not provided on the unremitted earnings of subsidiaries outside of the United States when it is expected that these earnings are permanently reinvested. Such earnings may become taxable upon the sale or liquidation of these subsidiaries or upon the remittance of dividends. Deferred taxes are provided when the Company no longer considers subsidiary earnings to be permanently invested, such as in situations where the Company’s subsidiaries plan to make future dividend distributions.
The Company recognizes accrued amounts of interest and penalties related to its uncertain tax positions as part of income tax expense within its consolidated statement of operations.
Currency Translation and Transactions
The reporting currency for the consolidated financial statements of the Company is the U.S. dollar. The functional currency for the Company’s operations is generally the applicable local currency. Accordingly, the assets and liabilities of companies whose functional currency is other than the U.S. dollar are included in the consolidated financial statements by translating the assets and liabilities into the reporting currency at the exchange rates applicable at the end of the reporting period. The statements of operations and cash flows of such non-U.S. dollar functional currency operations are translated at the monthly average exchange rates during the year. Translation gains or losses are accumulated in other comprehensive income (loss) in the consolidated statements of shareholders’ equity. Transaction gains and losses are included as a component of net earnings or in certain circumstances as a component of other comprehensive income (loss) where the underlying item is considered a hedge of a net investment.
Revenue Recognition
Revenue is recognized when title to a product has transferred and any significant customer obligations have been fulfilled. Standard shipping terms are generally FOB shipping point in most countries and, accordingly, title and risk of loss transfers upon shipment. In countries where title cannot legally transfer before delivery, the Company defers revenue recognition until delivery has occurred. The Company generally maintains the right to accept or reject a product return in its terms and conditions and also maintains appropriate accruals for outstanding credits. Shipping and handling costs charged to customers are included in total net sales and the associated expense is recorded in cost of sales for all

F - 10

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


periods presented. Other than a few small software applications, the Company does not sell software products without the related hardware instrument as the software is embedded in the instrument. The Company’s products typically require no significant production, modification, or customization of the hardware or software that is essential to the functionality of the products. To the extent the Company’s solutions have a post-shipment obligation, revenue is deferred until the obligation has been completed. The Company defers product revenue where installation is required, unless such installation is deemed perfunctory. The Company also sometimes enters into certain arrangements that require the separate delivery of multiple goods and/or services. These deliverables are accounted for separately if the deliverables have standalone value and the performance of undelivered items is probable and within the Company's control. The allocation of revenue between the separate deliverables is typically based on the relative selling price at the time of the sale in accordance with a number of factors including service technician billing rates, time to install and geographic location.
Certain products are also sold through indirect distribution channels whereby the distributor assumes any further obligations to the customer upon title transfer. Revenue is recognized on these products upon transfer of title and risk of loss to its distributors. Distributor discounts are offset against revenue at the time such revenue is recognized.
Service revenue not under contract is recognized upon the completion of the service performed. Spare parts sold on a stand-alone basis are recognized upon title and risk of loss transfer which is generally at the time of shipment. Revenues from service contracts are recognized ratably over the contract period. These contracts represent an obligation to perform repair and other services including regulatory compliance qualification, calibration, certification and preventative maintenance on a customer’s pre-defined equipment over the contract period. Service contracts are separately priced and payment is typically received from the customer at the beginning of the contract period.
Research and Development
Research and development costs primarily consist of salaries, consulting, and other costs. The Company expenses these costs as incurred.
Warranty
The Company generally offers one-year warranties on most of its products. Product warranties are recorded at the time revenue is recognized. While the Company engages in extensive product quality programs and processes, its warranty obligations are affected by product failure rates, material usage and service costs incurred in correcting a product failure.
Employee Termination Benefits
In situations where contractual termination benefits exist, the Company records accruals for employee termination benefits when it is probable that a liability has been incurred and the amount of the liability is reasonably estimable. All other employee termination arrangements are recognized and measured at their fair value at the communication date unless the employee is required to render additional service beyond the legal notification period, in which case the liability is recognized ratably over the future service period.
Earnings per Common Share
In accordance with the treasury stock method, the Company has included 506,137, 588,697, and 680,537 common equivalent shares in the calculation of diluted weighted average number of common

F - 11

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


shares for the years ended December 31, 2016, 2015, and 2014, respectively, relating to outstanding stock options and restricted stock units.
Outstanding options and restricted stock units to purchase or receive 102,017, 112,562, and 127,995 shares of common stock for the years ended December 31, 2016, 2015, and 2014, respectively, have been excluded from the calculation of diluted weighted average number of common and common equivalent shares as such options and restricted stock units would be anti-dilutive.
Equity-Based Compensation
The Company applies the fair value methodology in accounting for its equity-based compensation plan.
Derivative Financial Instruments
The Company has limited involvement with derivative financial instruments and does not use them for trading purposes. As described more fully in Note 5, the Company enters into foreign currency forward exchange contracts to economically hedge certain short-term intercompany balances involving its international businesses. Such contracts limit the Company’s exposure to currency fluctuations on the items they hedge. These contracts are adjusted to fair market value as of each balance sheet date, with the resulting changes in fair value being recognized in other charges (income), consistent with the underlying hedged item.
The Company also enters into foreign currency forward contracts, designated as cash flow hedges, to hedge certain forecasted intercompany sales. Such contracts limit the Company’s exposure to currency fluctuations on the items they hedge. Changes in fair value of outstanding foreign currency forward contract agreements that are effective as cash flow hedges are recognized in other comprehensive income as incurred.
The Company also enters into interest rate swap agreements in order to manage its exposure to changes in interest rates. The differential paid or received on interest rate swap agreements is recognized in interest expense over the life of the agreements as incurred. Floating to fixed interest rate swap agreements are accounted for as cash flow hedges. Changes in fair value of outstanding interest rate swap agreements that are effective as cash flow hedges are recognized in other comprehensive income as incurred.
Fair Value Measurements
The Company measures or monitors certain assets and liabilities on a fair value basis. Fair value is used on a recurring basis for assets and liabilities in which fair value is the primary basis of accounting, mainly derivative instruments. Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. When determining the fair value measurements for assets and liabilities required to be recorded at fair value, the Company considers the principal or most advantageous market in which it would transact and considers assumptions that market participants would use when pricing the asset or liability. The Company applies the fair value hierarchy established under U.S. GAAP and when possible looks to active and observable markets to price identical assets and liabilities. If identical assets and liabilities are not traded in active markets, the Company looks to market observable data for similar assets and liabilities.

F - 12

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


Recent Accounting Pronouncements
The FASB issued ASU 2014-09, ASU 2016-10 and ASU 2016-12 to ASC 606 "Revenue from Contracts with Customers." ASU 2014-09 provides authoritative guidance clarifying the principles for recognizing revenue and developing a common revenue standard for U.S. GAAP. The core principle of the guidance is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods and services. Additionally, the guidance requires improved disclosure to help users of financial statements better understand the nature, amount, timing, and uncertainty of revenue that is recognized. ASU 2016-10 provides guidance for identifying performance obligations as they pertain to immaterial promised goods or services, shipping and handling activities, and identifying when promises represent performance obligations. ASU 2016-12 provides guidance for assessing collectability, presentation of sales taxes, noncash considerations, and completed contract modifications at transition. The guidance becomes effective for the Company for the year beginning January 1, 2018. The Company is finalizing its evaluation of the impact of the adoption of this guidance and believes it will have an immaterial impact on the Company's consolidated results of operations and financial position. The estimated impact to the Company's results is expected to be immaterial because most of its performance obligations are satisfied at the time of title transfer and risk of loss to the customer which is generally upon shipment. In addition, contracts with end-customers typically do not exceed a year, and generally pertain to service contracts that represent an obligation to perform repair or other services on a customer's pre-defined equipment over the contract period. The Company also sometimes enters into contracts with end-customers that comprise arrangements that require separate delivery of multiple goods and/or services, including post-shipment obligations such as installation. Immaterial impacts from adopting the new standard include the recognition of certain revenue for performance obligations that were deferred until post-shipment obligations were completed. The number of performance obligations under the new standard is also not materially different from the Company's financial accounting and reporting model under the existing standard. The Company is still evaluating the adoption method it will elect upon implementation. The Company is also in the process of implementing appropriate changes to its business processes, systems and controls to support recognition and disclosures under the new standard.
In October 2016, the FASB issued ASU 2016-16, to ASC 740 "Income Taxes," which simplifies the recording of an inter-entity transfer of assets other than inventory. The new guidance requires that a company recognize the income tax consequences of an intra-entity transfer of an asset other than inventory when the transfer occurs. The new guidance becomes effective for annual reporting periods beginning after December 15, 2017 and must be applied using a modified retrospective basis through a cumulative-effect adjustment directly to retained earnings as of the beginning of the adoption period. The Company is currently evaluating the impact of this guidance on our financial statements and the timing of adoption.
In August 2016, the FASB issued ASU 2016-15, to ASC 230 "Statement of Cash Flows," which clarifies how certain cash receipts and cash payments are classified in the statement of cash flows. The new guidance must be applied retrospectively and becomes effective for the year beginning January 1, 2018 with early adoption permitted. The Company is currently evaluating the impact of this guidance on our financial statements and the timing of adoption.
In March 2016, the FASB issued ASU 2016-09, to ASC 718 "Compensation - Stock Compensation." The guidance allows for the simplification related to several aspects of the accounting for share-based payment transactions, including income tax consequences, the accounting for forfeitures, classification of

F - 13

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


awards as either equity or liabilities, and classification on the statement of cash flows. The guidance can be applied either on a retrospective or prospective basis and becomes effective for annual periods beginning after December 15, 2016. The Company will adopt the guidance in the first quarter of 2017. The primary impact of adoption will be the recognition of excess tax benefits within the provision for taxes rather than within shareholder's equity, which the Company will adopt on a prospective basis. The Company expects the adoption of this guidance will reduce its income tax rate by approximately 2% in 2017. In addition, the excess tax benefits from share-based payment arrangements will be classified as operating cash flows on the statement of cash flows.
In February 2016, the FASB issued ASU 2016-02 to ASC 842 "Leases." The accounting guidance primarily requires lessees to recognize most leases on their balance sheet as a right to use asset and a lease liability, with the exception of short term leases. A lessee will continue to recognize lease expense on a straight-line basis for leases classified as operating leases. The guidance becomes effective for fiscal years beginning after December 15, 2018 and must be applied on a retrospective basis with early adoption permitted. The Company is currently evaluating the impact of this guidance on our financial statements and the timing of adoption.
In December 2016, the Company adopted ASU 2015-07, to ASC 820 "Fair Value Measurements." ASU 2015-07 removes the requirement to categorize investments using the net asset value per share method within the fair value hierarchy. The Company adopted this guidance in the fourth quarter of 2016 which is disclosed in Note 12 of the financial statements. The adoption of this guidance did not have a material impact on the Company's consolidated financial position or disclosures.
In December 2016, the Company adopted ASU 2015-17, to ASC 740 "Income Taxes". The guidance simplifies the balance sheet classification of deferred taxes. The new guidance requires that all deferred tax balances be presented as non-current. The impact to the consolidated balance sheet at December 31, 2015 was a reduction of current assets by $67.5 million and a reduction of current liabilities by $36.9 million, respectively. The impact to total assets and total liabilities at December 31, 2015 was a reduction $57.4 million, respectively.
In March 2016, the Company adopted ASU 2015-03 and ASU 2015-15, to ASC 835 "Interest-Imputation of Interest." The accounting guidance requires debt issuance costs to be presented in the balance sheet as a direct deduction from the carrying value of the associated debt liability, but allows debt issuance costs related to line-of-credit arrangements to remain as an asset. The Company elected to continue to present unamortized debt issuance costs related to the credit facility as an other non-current asset. The Company applied the adoption of these standards retrospectively and reclassified $1.6 million and $1.8 million of unamortized debt issuance costs from other non-current assets to long-term debt as of December 31, 2016 and 2015, respectively. The adoption of this guidance did not have a material impact on the Company's consolidated financial position.

3.    ACQUISITIONS

In the third quarter of 2016, the Company acquired substantially all of the assets of Henry Troemner, LLC, (Troemner) a supplier of lab equipment, weights and weight calibration based in the United States for an aggregate purchase price of $95.8 million that has been included into the Company's laboratory instrument offering. Goodwill recorded in connection with the acquisition totaled $33.8 million, which is included in the Company's U.S. Operations segment. The Company identified intangible assets which included customer relationships of $43.9 million, tradename of $3.4 million, technology and

F - 14

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


patents of $2.9 million and other intangibles of $0.5 million. The identifiable intangible assets will be amortized on a straight-line basis over periods ranging from 3 to 25 years and the annual aggregate amortization expense is estimated at $2.7 million. Net tangible assets acquired were $11.3 million and are recorded at fair value in the consolidated financial statements.
In 2016, the Company also incurred additional acquisition payments totaling $15.6 million. Goodwill recorded in connection with these acquisitions totaled $7.5 million. The Company also recorded $9.4 million of identified intangibles primarily pertaining to customer relationships in connection with these acquisitions, which will be amortized on a straight-line basis over 10 to 15 years.

4.    INVENTORIES
Inventory consisted of the following at December 31:
 
2016
 
2015
Raw materials and parts
$
100,408

 
$
98,252

Work-in-progress
41,454

 
35,100

Finished goods
80,185

 
81,031

Total Inventory
$
222,047

 
$
214,383


5.    FINANCIAL INSTRUMENTS
The Company has limited involvement with derivative financial instruments and does not use them for trading purposes. The Company enters into certain interest rate swap agreements in order to manage its exposure to changes in interest rates. At December 31, 2016, the interest payments associated with 71% of the Company's debt are fixed obligations. The amount of the Company's fixed obligation interest payments may change based upon the expiration dates of its interest rate swap agreement and the level and composition of its debt. The Company also enters into certain foreign currency forward contracts to limit the Company's exposure to currency fluctuations on the respective hedged items. As also mentioned in Note 9, the Company has designated its euro-denominated debt as a hedge of a portion of its net investment in a euro denominated foreign subsidiary. For additional disclosures on the fair value of financial instruments, see Note 6.
Cash Flow Hedges
The Company previously entered into foreign currency forward contracts, designated as cash flow hedges, to hedge certain forecasted intercompany sales denominated in euro with its Swiss-based business. In January 2015, prior to the Swiss National Bank's abandonment of its previously established exchange rate of 1.20 Swiss franc per euro, the Company increased the notional amount of the cash flow hedges to a total notional value and average forward rate of Euro 86 million and 1.21 for contracts that matured in 2015 and Euro 67 million and 1.19 for contracts that matured in 2016. As of December 31, 2016 there were no foreign currency forward contracts outstanding. The notional amount of foreign currency forward contracts outstanding was $73 million (Euro 67 million) at December 31, 2015. The amount recognized in other comprehensive income (loss) during 2016 and 2015 was a loss of $0.3 million and a gain of $19.0 million, respectively.
The Company has an interest rate swap agreement designated as a cash flow hedge. The agreement is a swap which has the effect of changing the floating rate LIBOR-based interest payments associated with $50 million in forecasted borrowings under the Company's credit agreement to a fixed obligation of 2.52% beginning in October 2015 and matures in October 2020.

F - 15

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


In March 2015, the Company entered into a forward-starting interest rate swap agreement. The
agreement will change the floating rate LIBOR-based interest payments associated with $100 million in
forecasted borrowings under the Company's credit agreement to a fixed obligation of 2.25% beginning in
February 2017 and matures in February 2022.
The Company's cash flow hedges are recorded gross at fair value in the consolidated balance sheet at December 31, 2016 and 2015, and disclosed in Note 6 to the consolidated financial statements. Amounts reclassified into other comprehensive income and the effective portions of the cash flow hedges are further disclosed in Note 10 to the consolidated financial statements. A derivative loss of $1.1 million based upon interest rates at December 31, 2016 is expected to be reclassified from other comprehensive income (loss) to earnings in the next 12 months. Through December 31, 2016, no hedge ineffectiveness has occurred in relation to these cash flow hedges.

Other Derivatives

The Company enters into foreign currency forward contracts in order to economically hedge short-term trade and non-trade intercompany balances largely denominated in Swiss franc, other major European currencies, and the Chinese Renminbi with its foreign businesses. In accordance with U.S. GAAP, these contracts are considered “derivatives not designated as hedging instruments.” Gains or losses on these instruments are reported in current earnings. The foreign currency forward contracts are recorded at fair value in the consolidated balance sheet at December 31, 2016 and 2015, as disclosed in Note 6 to the consolidated financial statements. The Company recognized in other charges (income), a net loss of $3.3 million and $5.3 million during the years ended December 31, 2016 and 2015, respectively. At December 31, 2016 and 2015, these contracts had a notional value of $353.0 million and $318.7 million, respectively.
The Company may be exposed to credit losses in the event of nonperformance by the counterparties to its derivative financial instrument contracts. Counterparties are established banks and financial institutions with high credit ratings. The Company believes that such counterparties will be able to fully satisfy their obligations under these contracts.

6.    FAIR VALUE MEASUREMENTS
At December 31, 2016 and 2015, the Company had derivative assets totaling $0.8 million and $8.2 million, respectively, and derivative liabilities totaling $5.8 million and $4.7 million, respectively. The fair values of the interest rate swap agreements, foreign currency forward contracts designated as cash flow hedges, and foreign currency forward contracts that economically hedge short-term intercompany balances are estimated based upon inputs from current valuation information obtained from dealer quotes and priced with observable market assumptions and appropriate valuation adjustments for credit risk. The Company has evaluated the valuation methodologies used to develop the fair values by dealers in order to determine whether such valuations are representative of an exit price in the Company’s principal market. In addition, the Company uses an internally developed model to perform testing on the valuations received from brokers. The Company has also considered both its own credit risk and counterparty credit risk in determining fair value and determined these adjustments were insignificant for the years ended December 31, 2016 and 2015.
The Company had $21.5 million and $18.8 million of cash equivalents at December 31, 2016 and 2015, respectively, the fair value of which is determined through quoted and corroborated prices in active markets. The fair value of cash equivalents approximates cost.

F - 16

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The fair value of the Company's fixed interest rate debt was estimated using Level 2 inputs, primarily discounted cash flow models, based on estimated current rates offered for similar debt under current market conditions for the Company. The fair value of the Company's debt exceeds the carrying value by approximately $4.2 million as of December 31, 2016. The carrying value of the Company's debt exceeded the fair value by approximately $9.2 million as of December 31, 2015.
Under U.S. GAAP, fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. A fair value measurement consists of observable and unobservable inputs that reflect the assumptions that a market participant would use in pricing an asset or liability.
A fair value hierarchy has been established that categorizes these inputs into three levels:
Level 1: Quoted prices in active markets for identical assets and liabilities
Level 2: Observable inputs other than quoted prices in active markets for identical assets and liabilities
Level 3: Unobservable inputs
The following table presents, for each of these hierarchy levels, the Company’s assets and liabilities that are measured at fair value on a recurring basis at December 31, 2016 and 2015:
 
December 31, 2016
 
December 31, 2015
 
Total
 
Level 1
 
Level 2
 
Level 3
 
Total
 
Level 1
 
Level 2
 
Level 3
Assets:
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Cash equivalents
$
21,513

 
$

 
$
21,513

 
$

 
$
18,755

 
$

 
$
18,755

 
$

Foreign currency forward contracts designated as cash flow hedges

 

 

 

 
7,056

 

 
7,056

 

Foreign currency forward contracts not designated as hedging instruments
791

 

 
791

 

 
1,166

 

 
1,166

 

Total
$
22,304

 
$

 
$
22,304

 
$

 
$
26,977

 
$

 
$
26,977

 
$

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Liabilities:
 

 
 
 
 
 
 
 
 

 
 
 
 
 
 
Interest rate swap agreements
$
3,630

 
$

 
$
3,630

 
$

 
$
4,092

 
$

 
$
4,092

 
$

Foreign currency forward contracts not designated as hedging instruments
2,123

 

 
2,123

 

 
625

 

 
625

 

Total
$
5,753

 
$

 
$
5,753

 
$

 
$
4,717

 
$

 
$
4,717

 
$


7.    PROPERTY, PLANT, AND EQUIPMENT, NET
Property, plant, and equipment, net consisted of the following at December 31:
 
2016
 
2015
Land
$
55,885

 
$
47,358

Building and leasehold improvements
247,883

 
211,490

Machinery and equipment
347,344

 
341,820

Computer software
372,065

 
353,556

Property, plant, and equipment, gross
1,023,177

 
954,224

Less accumulated depreciation and amortization
(459,470
)
 
(436,995
)
Property, plant, and equipment, net
$
563,707

 
$
517,229


F - 17

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


8.    GOODWILL AND OTHER INTANGIBLE ASSETS
The following table shows the changes in the carrying amount of goodwill for the years ended December 31:
 
2016
 
2015
Balance at beginning of year
$
446,284

 
$
444,085

Goodwill acquired
41,308

 
9,773

Foreign currency translation
(11,214
)
 
(7,574
)
Balance at year end
$
476,378

 
$
446,284

Goodwill and indefinite-lived assets are reviewed for impairment on an annual basis in the fourth quarter. The Company completed its impairment review and determined that, through December 31, 2016, there had been no impairment of these assets.
The components of other intangible assets as of December 31 are as follows:
 
2016
 
2015
 
Gross
Amount
 
Accumulated
Amortization
 
Intangibles, Net
 
Gross
Amount
 
Accumulated
Amortization
 
Intangibles, Net
Customer relationships
$
147,466

 
$
(34,672
)
 
$
112,794

 
$
98,175

 
$
(30,836
)
 
$
67,339

Proven technology and patents
58,394

 
(35,128
)
 
23,266

 
52,938

 
(32,444
)
 
20,494

Tradenames (finite life)
4,182

 
(2,514
)
 
1,668

 
4,200

 
(2,158
)
 
2,042

Tradenames (indefinite life)
28,272

 

 
28,272

 
24,814

 

 
24,814

Other
2,871

 
(1,816
)
 
1,055

 
2,111

 
(1,548
)
 
563

 
$
241,185

 
$
(74,130
)
 
$
167,055

 
$
182,238

 
$
(66,986
)
 
$
115,252

The Company recognized amortization expense associated with the above intangible assets of $8.3 million, $6.3 million, and $6.5 million for the years ended December 31, 2016, 2015, and 2014, respectively. The annual aggregate amortization expense based on the current balance of other intangible assets is estimated at $9.8 million for 2017, $9.5 million for 2018, $9.1 million for 2019, $8.8 million for 2020, and $8.2 million for 2021. The finite-lived intangible assets are amortized on a straight-line basis over periods ranging from 3 to 45 years. The straight-line method of amortization reflects an appropriate allocation of the cost of the intangible assets to earnings in proportion to the amount of economic benefits obtained by the Company in each reporting period. Purchased intangibles amortization was $7.4 million, $5.0 million after tax, $5.7 million, $3.9 million after tax, and $5.6 million, $3.9 million after tax, for the years ended December 31, 2016, 2015, and 2014, respectively.
In addition to the above amortization, the Company recorded amortization expense associated with capitalized software of $27.5 million, $24.4 million, and $22.4 million for the years ended December 31, 2016, 2015, and 2014, respectively.


F - 18

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


9.    DEBT
Debt consisted of the following at December 31:
 
2016
 
2015
$50 million Senior Notes, interest at 3.67%, due December 17, 2022
$
50,000

 
$
50,000

$50 million Senior Notes, interest 4.10%, due September 19, 2023
50,000

 
50,000

$125 million Senior Notes, interest 3.84%, due September 19, 2024
125,000

 
125,000

$125 million Senior Notes, interest 4.24%, due June 25, 2025
125,000

 
125,000

Euro 125 million Senior Notes, interest 1.47%, due June 17, 2030
131,507

 
136,575

Debt issuance costs, net
(1,642
)
 
(1,846
)
Total Senior Notes
479,865

 
484,729

$800 million Credit Agreement, interest at LIBOR plus 87.5 basis points
395,191

 
90,409

Other local arrangements
18,974

 
14,488

Total debt
894,030

 
589,626

Less: current portion
(18,974
)
 
(14,488
)
Long-term debt
$
875,056

 
$
575,138

3.67% Senior Notes
In 2012, the Company issued and sold $50 million of 3.67% Senior Notes due December 17, 2022 in a private placement. The 3.67% Senior Notes are senior unsecured obligations of the Company. Interest is payable semi-annually in June and December.
The 3.67% Senior Notes contain customary affirmative and negative covenants including, among others, limitations on the Company and its subsidiaries with respect to incurrence of liens and priority indebtedness, disposition of assets, mergers, and transactions with affiliates. The note purchase agreement also requires the Company to maintain a consolidated interest coverage ratio of not less than 3.5 to 1.0 and a consolidated leverage ratio of not more than 3.5 to 1.0. The 3.67% Senior Notes also contain customary events of default with customary grace periods, as applicable. The Company was in compliance with its covenants at December 31, 2016.
Issuance costs approximating $0.4 million are being amortized to interest expense over the ten-year term of the 3.67% Senior Notes.
4.10% Senior Notes
In 2013, the Company issued and sold $50 million of 4.10% Senior Notes due September 19, 2023 in a private placement. The 4.10% Senior Notes are senior unsecured obligations of the Company. Interest on the 4.10% Senior Notes is payable semi-annually in March and September each year, beginning in March 2014.
The 4.10% Senior Notes contain customary affirmative and negative covenants, change in control and prepayment provisions, that are substantially similar to those contained in the previously issued debt of the Company as described above. The 4.10% Senior Notes also contain customary events of default with customary grace periods, as applicable. The Company was in compliance with its covenants at December 31, 2016.
Issuance costs approximating $0.4 million are being amortized to interest expense over the ten-year term of the 4.10% Senior Notes.

F - 19

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


3.84% Senior Notes and 4.24% Senior Notes
In the second quarter of 2014, the Company entered into an agreement to issue and sell $250 million of ten-year Senior Notes in a private placement. The Company issued $125 million with a fixed interest rate of 3.84% ("3.84% Senior Notes") in September 2014 and issued $125 million with a fixed interest rate of 4.24% ("4.24% Senior Notes") in June 2015. The Senior Notes are senior unsecured obligations of the Company. Interest on the 3.84% Senior Notes is payable semi-annually in March and September each year, beginning in March 2015. Interest on the 4.24% Senior Notes is payable semi-annually in June and December of each year, beginning in December 2015. The 4.24% Senior Notes were used to repay $100 million of 6.3% Senior Notes which were due June 25, 2015.
The 3.84% Senior Notes and 4.24% Senior Notes contain customary affirmative and negative covenants, change in control and prepayment provisions, that are substantially similar to those contained in the previously issued debt of the Company as described above. The 3.84% Senior Notes and 4.24% Senior Notes also contain customary events of default with customary grace periods, as applicable. The Company was in compliance with its covenants at December 31, 2016.
Issuance costs approximating $0.9 million are being amortized to interest expense over the ten-year term of the Senior Notes.
1.47% Euro Senior Notes
In 2015, the Company issued in a private placement Euro 125 million with a fixed interest rate of 1.47% ("1.47% Euro Senior Notes") fifteen-year Senior Notes. The Euro Senior Notes are senior unsecured obligations of the Company. The Company has designated the 1.47% Euro Senior Notes as a hedge of a portion of its net investment in a euro denominated foreign subsidiary to reduce foreign currency risk associated with this net investment. Changes in the carrying value of this debt resulting from fluctuations in the euro to U.S. dollar exchange rate are recorded as foreign currency translation adjustments within other comprehensive income (loss). The Company recorded an unrealized gain in other comprehensive income (loss) related to this net investment hedge of $5.1 million and $3.6 million for the period ended December 31, 2016 and 2015, respectively.
Interest on the 1.47% Senior Notes is payable in June and December each year, beginning in December 2015. The 1.47% Senior Notes contain customary affirmative and negative covenants, change in control and prepayment provisions, that are substantially similar to those contained in the previously issued debt of the Company as described above. The 1.47% Senior Notes also contain customary events of default with customer grace periods, as applicable. The Company was in compliance with its covenants at December 31, 2016.
Issuance costs approximating $0.4 million are being amortized to interest expense over the fifteen-year term of the Euro Senior Notes.
Credit Agreement
In 2015, the Company entered into an $800 million Credit Agreement (the "Credit Agreement"), which amended its $800 million Amended and Restated Credit Agreement (the "Prior Credit Agreement"). The Credit Agreement is provided by a group of financial institutions (similar to the Company's Prior Credit Agreement) and has a maturity date of December 17, 2020. It is a revolving credit facility and is not subject to any scheduled principal payments prior to maturity. The obligations under the Credit Agreement are unsecured.

F - 20

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


Borrowings under the Credit Agreement bear interest at current market rates plus a margin based on the Company’s consolidated leverage ratio, which was set at LIBOR plus 87.5 basis points as of December 31, 2016. The Company must also pay facility fees that are tied to its leverage ratio. The Credit Agreement contains covenants that are substantially similar to those contained in the previously issued debt of the Company as described above, with which the Company was in compliance as of December 31, 2016. The Credit Agreement also places certain limitations on the Company, including limiting the ability to incur liens or indebtedness at a subsidiary level. In addition, the Credit Agreement has several events of default. The Company incurred approximately $0.1 million of debt extinguishment costs during 2015 related to the Prior Credit Agreement. The Company capitalized $1.1 million in financing fees during 2015 associated with the Credit Agreement which will be amortized to interest expense through 2020. As of December 31, 2016, approximately $399.6 million was available under the facility.
The Company’s weighted average interest rate was 3.7% and 4.7% for the years ended December 31, 2016 and 2015, respectively.

10.    SHAREHOLDERS’ EQUITY
Common Stock
The number of authorized shares of the Company’s common stock is 125,000,000 shares with a par value of $0.01 per share. Holders of the Company’s common stock are entitled to one vote per share. At December 31, 2016, 3,706,789 shares of the Company’s common stock were reserved for issuance pursuant to the Company’s stock option plans.
Preferred Stock
The Board of Directors, without further shareholder authorization, is authorized to issue up to 10,000,000 shares of preferred stock, par value $0.01 per share in one or more series and to determine and fix the rights, preferences, and privileges of each series, including dividend rights and preferences over dividends on the common stock and one or more series of the preferred stock, conversion rights, voting rights (in addition to those provided by law), redemption rights, and the terms of any sinking fund therefore, and rights upon liquidation, dissolution, or winding up, including preferences over the common stock and one or more series of the preferred stock. The issuance of shares of preferred stock, or the issuance of rights to purchase such shares, may have the effect of delaying, deferring, or preventing a change in control of the Company or an unsolicited acquisition proposal.
Share Repurchase Program
The Company has a share repurchase program of which there was $983.4 million common shares remaining to be repurchased under the program as of December 31, 2016. The share repurchases are expected to be funded from cash balances, borrowings, and cash generated from operating activities. Repurchases will be made through open market transactions, and the amount and timing of purchases will depend on business and market conditions, the stock price, trading restrictions, the level of acquisition activity, and other factors.
The Company has purchased 26.0 million common shares since the inception of the program in 2004 through December 31, 2016, at a total cost of $3.5 billion. During the years ended December 31, 2016 and 2015, the Company spent $500 million and $495 million on the repurchase of 1,348,507 shares and 1,556,797 shares at an average price per share of $370.75 and $317.92, respectively. The Company

F - 21

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


reissued 278,623 shares and 403,908 shares held in treasury for the exercise of stock options and restricted stock units during 2016 and 2015, respectively.
Accumulated Other Comprehensive Income (Loss)
The following table presents changes in accumulated other comprehensive income by component for the period ended December 31, 2016 and 2015:
 
Currency Translation Adjustment, Net of Tax
 
Net Unrealized
Gain (Loss) on
Cash Flow Hedging Arrangements,
Net of Tax
 
Pension and Post-Retirement Benefit Related Items,
Net of Tax
 
Total
Balance at December 31, 2014
$
(4,960
)
 
$
(1,944
)
 
$
(206,045
)
 
$
(212,949
)
Other comprehensive income (loss), net of tax:
 
 
 
 
 
 
 
Net unrealized actuarial gains (loss), prior service costs, and plan amendments

 

 
(21,570
)
 
(21,570
)
Net unrealized gains (loss) on cash flow hedging arrangements

 
13,221

 

 
13,221

Foreign currency translation adjustment
(52,434
)
 

 
5,835

 
(46,599
)
Amounts recognized from accumulated other comprehensive income (loss), net of tax

 
(8,261
)
 
9,509

 
1,248

Net change in other comprehensive income (loss), net of tax
(52,434
)
 
4,960

 
(6,226
)
 
(53,700
)
Balance at December 31, 2015
$
(57,394
)
 
$
3,016

 
$
(212,271
)
 
$
(266,649
)
Other comprehensive income (loss), net of tax:
 
 
 
 
 
 
 
Net unrealized actuarial gains (loss), prior service costs and plan amendments

 

 
(47,788
)
 
(47,788
)
Net unrealized gains (loss) on cash flow hedging arrangements

 
(513
)
 

 
(513
)
Foreign currency translation adjustment
(57,928
)
 

 
5,885

 
(52,043
)
Amounts recognized from accumulated other comprehensive income (loss), net of tax

 
(4,735
)
 
16,730

 
11,995

Net change in other comprehensive income (loss), net of tax
(57,928
)
 
(5,248
)
 
(25,173
)
 
(88,349
)
Balance at December 31, 2016
$
(115,322
)
 
$
(2,232
)
 
$
(237,444
)
 
$
(354,998
)


F - 22

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The following table presents amounts recognized from accumulated other comprehensive income (loss) for the twelve months period ended December 31, 2016 and 2015:
 
 
2016
 
2015
 
Location of Amounts Recognized in Earnings
Effective portion of losses (gains) on cash flow hedging arrangements:
 
 
 
 
 
 
Interest rate swap agreements
 
$
1,034

 
$
2,764

 
Interest expense
Foreign currency forward contracts
 
(6,756
)
 
(12,529
)
 
Cost of sales - products
Total before taxes
 
(5,722
)
 
(9,765
)
 
 
Provision for taxes
 
(987
)
 
(1,504
)
 
Provision for taxes
Total, net of taxes
 
$
(4,735
)
 
$
(8,261
)
 
 
 
 
 
 
 
 
 
Recognition of defined benefit pension and post-retirement items:
 
 
 
 
 
 
Recognition of actuarial losses, plan amendments, prior service cost, and settlement charge before taxes
 
$
23,925

 
$
13,018

 
(a)
Provision for taxes
 
7,195

 
3,509

 
Provision for taxes
Total, net of taxes
 
$
16,730

 
$
9,509

 
 
(a)
These accumulated other comprehensive income (loss) components are included in the computation of net periodic pension and post-retirement cost. See Note 12 for additional details for the year ended December 31, 2016.
11.    EQUITY INCENTIVE PLAN
The Company’s equity incentive plan provides employees and directors of the Company additional incentives to join and/or remain in the service of the Company as well as to maintain and enhance the long-term performance and profitability of the Company. The Company’s 2013 equity incentive plan was approved by shareholders on May 2, 2013 and provides that 2 million shares of common stock, plus any shares that remained available for grant under the Company's prior equity incentive plan as well as options outstanding that terminate without being exercised, may be the subject of awards. The plan provides for the grant of options, restricted stock units and other equity-based awards. The exercise price of options granted shall not be less than the fair market value of the common stock on the date of the award. Options primarily vest equally over a five-year period from the date of grant and have a maximum term of up to ten years and six months. Restricted units primarily vest equally over a five-year period from the date of grant. Performance share units generally vest after a three-year period from the date of the grant based upon satisfaction of the performance condition. The compensation committee of the Board of Directors has generally granted restricted share units to participating managers and non-qualified stock options and performance share units to executive officers.
All share-based compensation arrangements granted to employees, including stock option grants, are recognized in the consolidated statement of operations based on the grant-date fair value of the award over the period during which an employee is required to provide service in exchange for the award. Share-based compensation expense is recorded within selling, general, and administrative in the consolidated statement of operations with a corresponding offset to additional paid-in capital in the consolidated balance sheet.


F - 23

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The fair values of stock options granted were calculated using the Black-Scholes pricing model. The aggregate intrinsic value of an option is the amount by which the fair value of the underlying stock exceeds its exercise price. The following table summarizes all stock option activity from December 31, 2015 through December 31, 2016:
 
Number of
Options
 
Weighted Average
Exercise Price
 
Aggregate Intrinsic
Value (in millions)
Outstanding at December 31, 2015
1,374,705

 
$162.29
 
$243.1
Granted
92,992

 
397.95
 
 
Exercised
(250,520
)
 
101.67
 
 
Forfeited
(1,696
)
 
294.14
 
 
Outstanding at December 31, 2016
1,215,481

 
$192.63
 
$274.6
Options exercisable at December 31, 2016
888,061

 
$152.23
 
$236.5
The following table details the weighted average remaining contractual life of options outstanding at December 31, 2016 by range of exercise prices:
Number of Options
Outstanding
 
Weighted Average
Exercise Price
 
Remaining Contractual
Life of Options
Outstanding
 
Options
Exercisable
 
 
 
209,721

 
$
87.36

 
2.6
 
209,721

220,815

 
$
127.63

 
3.1
 
220,815

332,507

 
$
159.62

 
5.3
 
300,382

131,135

 
$
244.99

 
6.8
 
81,249

321,303

 
$
318.83

 
8.8
 
75,894

1,215,481

 
 

 
5.5
 
888,061

As of the date granted, the weighted average grant-date fair value of the options granted during the years ended December 31, 2016, 2015, and 2014 was $118.31, $92.81, and $77.64, respectively.
Such weighted average grant-date fair value was determined using the following assumptions:
 
2016
 
2015
 
2014
Risk-free interest rate
1.26
%
 
1.65
%
 
1.66
%
Expected life in years
5.7

 
5.7

 
5.6

Expected volatility
29
%
 
28
%
 
28
%
Expected dividend yield

 

 

The total intrinsic value of options exercised during the years ended December 31, 2016, 2015, and 2014 was approximately $69.5 million, $90.7 million, and $66.9 million, respectively.
The total fair value of options vested during the years ended December 31, 2016, 2015, and 2014 was approximately $7.4 million, $8.6 million, and $6.4 million, respectively.
During the fourth quarter of 2016, the Company granted 12,678 performance-based options, with a grant-date fair value of $1.5 million. Compensation expense will be recognized over the five year vesting provisions based upon the probability of the performance condition being met.


F - 24

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The following table summarizes all restricted stock unit and performance share unit activity from December 31, 2015 through December 31, 2016:
 
Number of Restricted
Stock Units
 
Aggregate Intrinsic
Value (in millions)
 
Number of Performance Share Units
 
Aggregate Intrinsic Value (in millions)
Outstanding at December 31, 2015
82,074

 
$
27.8

 

 
$

Granted
20,916

 
 

 
4,532

 
 
Vested
(28,103
)
 
 

 

 
 
Forfeited
(4,340
)
 
 

 

 
 
Outstanding at December 31, 2016
70,547

 
$
29.5

 
4,532

 
$
1.9

The weighted average grant-date fair value of the restricted stock units granted during years ended 2016 and 2015 was $397.95 and $312.57 per unit, respectively, and the restricted units vest ratably primarily over a five-year period. The total fair value of the restricted stock units on the date of grant of $8.3 million for 2016 and $8.1 million for 2015 will be recorded as compensation expense on a straight-line basis over the vesting period. The total fair value of restricted stock units vested during the years ended December 31, 2016, 2015, and 2014 was approximately $6.3 million, $6.0 million, and $5.8 million, respectively. Approximately $6.4 million and $5.8 million of compensation expense was recognized during the years ended December 31, 2016 and 2015, respectively.
During the fourth quarter of 2016, the Company granted performance share units with a market condition. Grantees of performance shares units will be eligible to receive shares of the Company's common stock depending upon our total shareholder return relative to the performance of companies in the S&P 500 Healthcare and S&P 500 Industrials over a three-year period. The awards actually earned will range from zero percent to 200 percent of the targeted number of performance share units for the three-year performance period and will be paid, to the extent earned, in the fiscal quarter following the end of the applicable three-year performance period. These awards were valued using a Monte Carlo Simulation based on the following assumptions:
 
2016
Risk-free interest rate
0.98
%
Expected life in years
3.0

Expected volatility
29
%
Expected dividend yield

As of the date granted, the fair value of the performance share units granted during 2016 was $470.17. The total fair value of the performance share units on the date of the grant was $2.1 million for 2016 and will be recorded as compensation expense on a straight-line basis over the 3-year period.
At December 31, 2016, a total of 2,305,033 shares of common stock were available for grant in the form of stock options, restricted stock units, or performance share units.
As of December 31, 2016, the unrecorded deferred share-based compensation balance related to stock options, restricted stock units and performance share units was $49.8 million and will be recognized using a straight-line method over an estimated weighted average amortization period of 2.4 years.


F - 25

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


12.    BENEFIT PLANS
The Company maintains a number of retirement and other post-retirement employee benefit plans.
Certain subsidiaries sponsor defined contribution plans. Benefits are determined and funded annually based upon the terms of the plans. Amounts recognized as cost under these plans amounted to $15.4 million, $16.0 million, and $15.6 million for the years ended December 31, 2016, 2015, and 2014, respectively.
Certain subsidiaries sponsor defined benefit plans. Benefits are provided to employees primarily based upon years of service and employees’ compensation for certain periods during the last years of employment. Prior to 2002, the Company’s U.S. operations also provided post-retirement medical benefits to their employees. Contributions for medical benefits are related to employee years of service.
The following tables set forth the change in benefit obligation, the change in plan assets, the funded status, and amounts recognized in the consolidated financial statements for the Company’s defined benefit plans and post-retirement plan at December 31, 2016 and 2015:
 
U.S. Pension Benefits
 
Non-U.S. Pension Benefits
 
Other Benefits
 
Total
 
2016
 
2015
 
2016
 
2015
 
2016
 
2015
 
2016
 
2015
Change in benefit obligation:
 

 
 

 
 

 
 

 
 

 
 

 
 
 
 
Benefit obligation at beginning of year
$
154,415

 
$
164,367

 
$
818,269

 
$
863,639

 
$
3,272

 
$
3,754

 
$
975,956

 
$
1,031,760

Service cost, gross
432

 
837

 
29,936

 
31,514

 

 

 
30,368

 
32,351

Interest cost
4,428

 
6,431

 
10,664

 
14,071

 
76

 
139

 
15,168

 
20,641

Actuarial losses (gains)
845

 
(10,145
)
 
42,786

 
(4,959
)
 
318

 
113

 
43,949

 
(14,991
)
Plan amendments and other

 

 

 
(12,391
)
 
150

 
163

 
150

 
(12,228
)
Benefits paid
(21,965
)
 
(7,075
)
 
(33,977
)
 
(49,010
)
 
(831
)
 
(897
)
 
(56,773
)
 
(56,982
)
Impact of foreign currency

 

 
(29,401
)
 
(24,595
)
 

 

 
(29,401
)
 
(24,595
)
Benefit obligation at end of year
$
138,155

 
$
154,415

 
$
838,277

 
$
818,269

 
$
2,985

 
$
3,272

 
$
979,417

 
$
975,956

Change in plan assets:
 

 
 

 
 

 
 

 
 

 
 

 
 
 
 
Fair value of plan assets at beginning of year
$
119,118

 
$
132,030

 
$
725,597

 
$
751,193

 
$

 
$

 
$
844,715

 
$
883,223

Actual return on plan assets
6,876

 
(5,907
)
 
15,927

 
(2,925
)
 

 

 
22,803

 
(8,832
)
Employer contributions
74

 
70

 
22,291

 
22,812

 
681

 
734

 
23,046

 
23,616

Plan participants’ contributions

 

 
13,277

 
12,850

 
150

 
163

 
13,427

 
13,013

Benefits paid
(21,965
)
 
(7,075
)
 
(33,977
)
 
(49,010
)
 
(831
)
 
(897
)
 
(56,773
)
 
(56,982
)
Impact of foreign currency and other

 

 
(26,946
)
 
(9,323
)
 

 

 
(26,946
)
 
(9,323
)
Fair value of plan assets at end of year
$
104,103

 
$
119,118

 
$
716,169

 
$
725,597

 
$

 
$

 
$
820,272

 
$
844,715

Funded status
$
(34,052
)
 
$
(35,297
)
 
$
(122,108
)
 
$
(92,672
)
 
$
(2,985
)
 
$
(3,272
)
 
$
(159,145
)
 
$
(131,241
)

F - 26

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


Amounts recognized in the consolidated balance sheets consist of:
 
U.S. Pension Benefits
 
Non-U.S. Pension Benefits
 
Other Benefits
 
Total
 
2016
 
2015
 
2016
 
2015
 
2016
 
2015
 
2016
 
2015
Other non-current assets
$

 
$

 
$
10,530

 
$
32,786

 
$

 
$

 
$
10,530

 
$
32,786

Accrued and other liabilities
(92
)
 
(92
)
 
(4,293
)
 
(4,508
)
 
(467
)
 
(483
)
 
(4,852
)
 
(5,083
)
Pension and other post-retirement liabilities
(33,960
)
 
(35,205
)
 
(128,345
)
 
(120,950
)
 
(2,518
)
 
(2,789
)
 
(164,823
)
 
(158,944
)
Accumulated other comprehensive loss (income)
69,528

 
83,347

 
255,855

 
216,224

 
(5,057
)
 
(9,943
)
 
320,326

 
289,628

Total
$
35,476

 
$
48,050

 
$
133,747

 
$
123,552

 
$
(8,042
)
 
$
(13,215
)
 
$
161,181

 
$
158,387

The following amounts have been recognized in accumulated other comprehensive income (loss), before taxes, at December 31, 2016 and have not yet been recognized as a component of net periodic pension cost:
 
U.S. Pension
Benefits
 
Non-U.S. Pension
Benefits
 
Other Benefits
 
Total
 
Total, After Tax
Plan amendments and prior service cost
$

 
$
(21,516
)
 
$
(1,151
)
 
$
(22,667
)
 
$
(17,480
)
Actuarial losses (gains)
69,528

 
277,371

 
(3,906
)
 
342,993

 
254,924

Total
$
69,528

 
$
255,855

 
$
(5,057
)
 
$
320,326

 
$
237,444

The following changes in plan assets and benefit obligations were recognized in other comprehensive income (loss), before taxes, for the year ended December 31, 2016:
 
U.S. Pension
Benefits
 
Non-U.S. Pension
Benefits
 
Other Benefits
 
Total
 
Total, After Tax
Net actuarial losses (gains)
$
1,750

 
$
60,026

 
$
319

 
$
62,095

 
$
47,788

Amortization of:
 
 
 
 
 
 


 
 
Actuarial (losses) gains
(15,569
)
 
(17,999
)
 
1,875

 
(31,693
)
 
(22,414
)
Plan amendments and prior service cost

 
5,076

 
2,692

 
7,768

 
5,684

Impact of foreign currency

 
(7,472
)
 

 
(7,472
)
 
(5,885
)
Total
$
(13,819
)
 
$
39,631

 
$
4,886

 
$
30,698

 
$
25,173

The accumulated benefit obligations at December 31, 2016 and 2015 were $138.2 million and $154.4 million, respectively, for the U.S. defined benefit pension plan and $818.9 million and $803.3 million, respectively, for all non-U.S. plans. Certain of the plans included within non-U.S. pension benefits have accumulated benefit obligations which exceed the fair value of plan assets. The projected benefit obligation, the accumulated benefit obligation, and fair value of assets of these plans as of December 31, 2016 were $214.1 million, $203.5 million, and $81.4 million, respectively.

F - 27

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The assumed discount rates and rates of increase in future compensation levels used in calculating the projected benefit obligations vary according to the economic conditions of the country in which the retirement plans are situated. The weighted average rates used for the purposes of the Company’s plans are as follows:
 
U.S.
 
Non-U.S.
 
2016
 
2015
 
2014
 
2016
 
2015
 
2014
Discount rate
3.97
%
 
4.27
%
 
4.00
%
 
0.98
%
 
1.31
%
 
1.65
%
Compensation increase rate
n/a

 
n/a

 
n/a

 
0.85
%
 
1.03
%
 
1.61
%
Expected long-term rate of return on plan assets
6.75
%
 
7.25
%
 
7.50
%
 
4.09
%
 
4.58
%
 
4.82
%
The assumed discount rates, rates of increase in future compensation levels, and the long-term rate of return used in calculating the net periodic pension cost vary according to the economic conditions of the country in which the retirement plans are situated. The weighted average rates used for the purposes of the Company’s plans are as follows:
 
U.S.
 
Non-U.S.
 
2016
 
2015
 
2014
 
2016
 
2015
 
2014
Discount rate
4.27
%
 
4.00
%
 
4.75
%
 
1.31
%
 
1.65
%
 
2.73
%
Compensation increase rate
n/a

 
n/a

 
n/a

 
1.03
%
 
1.61
%
 
1.61
%
Expected long-term rate of return on plan assets
7.25
%
 
7.50
%
 
7.50
%
 
4.58
%
 
4.82
%
 
4.87
%
Net periodic pension cost and net periodic post-retirement benefit for the defined benefit plans and U.S. post-retirement plan includes the following components for the years ended December 31:
 
U.S.
 
Non-U.S.
 
Other Benefits
 
Total
2016
 
2015
 
2014
 
2016
 
2015
 
2014
 
2016
 
2015
 
2014
 
2016
 
2015
 
2014
Service cost, net
$
432

 
$
837

 
$
893

 
$
16,804

 
$
18,664

 
$
15,189

 
$

 
$

 
$
170

 
$
17,236

 
$
19,501

 
$
16,252

Interest cost on projected benefit obligations
4,428

 
6,431

 
6,396

 
10,664

 
14,071

 
21,445

 
76

 
139

 
240

 
15,168

 
20,641

 
28,081

Expected return on plan assets
(7,781
)
 
(9,575
)
 
(8,549
)
 
(33,168
)
 
(36,832
)
 
(37,361
)
 

 

 

 
(40,949
)
 
(46,407
)
 
(45,910
)
Recognition of actuarial losses/(gains) and prior service costs
7,606

 
7,626

 
4,800

 
12,923

 
10,639

 
292

 
(4,567
)
 
(5,247
)
 
(2,215
)
 
15,962

 
13,018

 
2,877

Settlement charge
7,963

 

 

 

 

 

 

 

 

 
7,963

 

 

Net periodic pension cost / (benefit)
$
12,648

 
$
5,319

 
$
3,540

 
$
7,223

 
$
6,542

 
$
(435
)
 
$
(4,491
)
 
$
(5,108
)
 
$
(1,805
)
 
$
15,380

 
$
6,753

 
$
1,300

The amounts remaining in accumulated other comprehensive income (loss) that are expected to be recognized as a component of net periodic pension cost during 2017 are as follows:
 
U.S. Pension
Benefits
 
Non-U.S.
Pension Benefits
 
Other Benefits
 
Total
Plan amendments and prior service costs
$

 
$
(4,984
)
 
$
(779
)
 
$
(5,763
)
Actuarial losses (gains)
6,555

 
22,236

 
(1,895
)
 
26,896

Total
$
6,555

 
$
17,252

 
$
(2,674
)
 
$
21,133

The projected post-retirement benefit obligation was principally determined using discount rates of 3.41% in 2016, 3.54% in 2015, and 4.00% in 2014. Net periodic post-retirement benefit cost was principally determined using discount rates of 3.54% in 2016, and 4.00% in 2015, and 4.75% in 2014. The health care cost trend rate was 7.5% in 2016, was 8.0% in 2015, and ranged from 7.75% to 8.50% in 2014, decreasing to 5.00% in 2022. A one-percentage-point change in health care cost trend rates would have an immaterial impact on total service and interest cost components and the post-retirement benefit obligation.

F - 28

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The Company’s overall asset investment strategy is to achieve long-term growth while minimizing volatility by widely diversifying among asset types and strategies. Target asset allocations and investment return criteria are established by the pension committee or designated officers of each plan. Target asset allocation ranges for the U.S. pension plan include 35-55% in equity securities, 18-28% in fixed income securities, and 20-40% in other types of investments. International plan assets relate primarily to the Company’s Swiss plan with target allocations of 24-45% in equities, 35-55% in fixed income securities, and 15-25% in other types of investments. Actual results are monitored against targets and the trustees are required to report to the members of each plan, including an analysis of investment performance on an annual basis at a minimum. Day-to-day asset management is typically performed by third-party asset managers, reporting to the pension committees or designated officers.
The long-term rate of return on plan asset assumptions used to determine pension expense under U.S. GAAP are generally based on estimated future returns for the target investment mix determined by the trustees as well as historical investment performance.
The following table presents the fair value measurement of the Company’s plan assets by hierarchy level:
 
December 31, 2016
 
December 31, 2015
 
Quoted
Prices in
Active
Markets for
Identical
Assets
(Level 1)
 
Observable
Inputs for
Identical
Assets
(Level 2)
 
Unobservable
Inputs
(Level 3)
 
Total
 
Quoted
Prices in
Active
Markets for
Identical
Assets
(Level 1)
 
Observable
Inputs for
Identical
Assets
(Level 2)
 
Unobservable
Inputs
(Level 3)
 
Total
Asset Category:
 
 
 
 
 
 
 

 
 

 
 

 
 

 
 

Cash and Cash Equivalents
$
131,468

 
$

 
$

 
$
131,468

 
$
86,135

 
$

 
$

 
$
86,135

Equity Securities:
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Mettler-Toledo Stock
2,846

 

 

 
2,846

 
3,229

 

 

 
3,229

Equity Mutual Funds:
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

U.S.(1)
5,860

 
24,257

 

 
30,117

 
6,320

 
27,614

 

 
33,934

International(2)
54,760

 
52,404

 

 
107,164

 
41,982

 
50,748

 

 
92,730

Emerging Markets(3)
78,999

 
793

 

 
79,792

 
95,065

 
774

 

 
95,839

Fixed Income Securities:
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Corporate/Government
69,578

 

 

 
69,578

 
91,533

 

 

 
91,533

Bonds(4)
 
 
 
 
 
 
 
Fixed Income Mutual Funds:
 
 
 

 
 

 
 

 
 

 
 

 
 

 
 

Insurance Contracts(5)

 
19,955

 
1,300

 
21,255

 

 
20,351

 
1,367

 
21,718

Core Bond(6)
121,884

 
52,955

 

 
174,839

 
138,073

 
37,099

 

 
175,172

Real Asset Mutual Funds:
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Real Estate(7)
69,284

 

 

 
69,284

 
65,597

 

 

 
65,597

Commodities(8)
22,964

 

 
5,594

 
28,558

 
21,092

 
3,880

 
33,505

 
58,477

Other Types of Investments:
 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

Global Allocation Funds(9)
11,981

 
11,285

 

 
23,266

 
12,661

 
13,605

 

 
26,266

Total assets in fair value hierarchy
$
569,624

 
$
161,649

 
$
6,894

 
$
738,167

 
$
561,687

 
$
154,071

 
$
34,872

 
$
750,630

Investments measured at net asset value:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Emerging Markets (3)
 
 
 
 
 
 
4,407
 
 
 
 
 
 
 
5,343
Multi-Strategy Fund of Hedge Funds (10)
 
 
 
 
 
 
77,698
 
 
 
 
 
 
 
88,742
Total pension assets at fair value
 
 
 
 
 
 
$
820,272

 
 
 
 
 
 
 
$
844,715

_______________________________________
(1)
Represents primarily large capitalization equity mutual funds tracking the S&P 500 Index.

F - 29

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


(2)
Represents all capitalization core and value equity mutual funds located primarily in Switzerland, the United Kingdom, and Canada.
(3)
Represents core and growth mutual funds and funds of mutual funds invested in emerging markets primarily in Eastern Europe, Latin America, and Asia.
(4)
Represents investments in high-grade corporate and government bonds located in Switzerland and the European Union.
(5)
Represents fixed and variable rate annuity contracts provided by insurance companies.
(6)
Represents fixed income mutual funds invested in the U.S., the United Kingdom, Switzerland, and European government bonds, high-grade corporate bonds, mortgage-backed securities, and collateralized mortgage obligations.
(7)
Represents mutual funds invested in real estate located primarily in Switzerland.
(8)
Represents commodity funds invested across a broad range of sectors.
(9)
Represents mutual funds invested globally in both equities and fixed income securities.
(10)
Represents investments in underlying globally diversified hedge funds. Investments that are measured using the net asset value (NAV) per share practical expedient have not been categorized in the fair value hierarchy. The amounts presented above are intended to permit reconciliation of the fair value hierarchy to the fair value of total plan assets in order to determine the amounts included in the Consolidated Balance Sheet.
The fair value of the Company’s stock and corporate and government bonds are valued at the year end closing price as reported on the securities exchange on which they are traded. Mutual funds are valued at the exchange-listed year end closing price or at the net asset value of shares held by the fund at the end of the year. Insurance contracts are valued by discounting the related cash flows using a current year end market rate or at cash surrender value, which is presumed to equal fair value. Funds of hedge funds are valued at the net asset value of shares held by the fund at the end of the year.
The following table presents a rollforward of activity for the years ended December 31, 2016 and 2015 for Level 3 asset categories:
 
Commodities
 
Insurance
Contract
 
Total
Balance at December 31, 2014
$
28,196

 
$
1,388

 
$
29,584

Actual return on plan assets:
 

 
 

 
 

Related to assets held at end of year
2,408

 
22

 
2,430

Purchases
2,911

 
99

 
3,010

Impact of foreign currency
(10
)
 
(142
)
 
(152
)
Balance at December 31, 2015
$
33,505

 
$
1,367

 
$
34,872

Actual return on plan assets:
 

 
 

 
 

Related to assets held at end of year

 
25

 
25

Related to assets sold during the year
(2,857
)
 

 
(2,857
)
Sales
(21,278
)
 
(38
)
 
(21,316
)
Impact of foreign currency
(3,776
)
 
(54
)
 
(3,830
)
Balance at December 31, 2016
$
5,594

 
$
1,300

 
$
6,894

There were no transfers between any asset levels during the years ended December 31, 2016 and 2015.

F - 30

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The following benefit payments, which reflect expected future service as appropriate, are expected to be paid:
 
U.S. Pension
Benefits
 
Non-U.S. Pension
Benefits
 
Other Benefits Net of
Subsidy
 
Total
2017
$
7,693

 
$
40,407

 
$
467

 
$
48,567

2018
7,927

 
40,263

 
414

 
48,604

2019
8,120

 
39,952

 
381

 
48,453

2020
8,350

 
40,919

 
265

 
49,534

2021
8,472

 
39,001

 
239

 
47,712

2022-2027
43,902

 
192,274

 
860

 
237,036

In 2017, the Company expects to make employer pension contributions of approximately $18.9 million to its non-U.S. pension plan and employer contributions of approximately $0.5 million to its U.S. post-retirement medical plan.
In February 2016 the Company offered former employees a one-time option to receive a lump sum distribution of their vested pension plan benefits. Based upon the eligible participant acceptance, $14.6 million was paid from plan assets to these former employees in the second quarter of 2016 with a corresponding decrease in the benefit obligation. The Company incurred a one-time non-cash settlement charge recorded in other charges (income), net during the second quarter of 2016 of approximately $8.2 million, of which $8.0 million, $4.9 million after tax, was reclassified from accumulated other comprehensive income.

13.    TAXES
The sources of the Company’s earnings before taxes were as follows for the years ended December 31:
 
2016
 
2015
 
2014
United States
$
37,363

 
$
20,992

 
$
33,157

Non-United States
466,830

 
442,432

 
411,847

Earnings before taxes
$
504,193

 
$
463,424

 
$
445,004


F - 31

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The provisions for taxes consist of:
 
Current
 
Deferred
 
Total
Year ended December 31, 2016:
 
 
 
 
 
United States federal
$
20,116

 
$
(4,817
)
 
$
15,299

State and local
2,947

 
1,149

 
4,096

Non-United States
94,882

 
5,546

 
100,428

Total
$
117,945

 
$
1,878

 
$
119,823

Year ended December 31, 2015:
 

 
 

 
 

United States federal
$
11,071

 
$
3,029

 
$
14,100

State and local
2,164

 
617

 
2,781

Non-United States
90,232

 
3,491

 
93,723

Total
$
103,467

 
$
7,137

 
$
110,604

Year ended December 31, 2014:
 

 
 

 
 

United States federal
$

 
$
5,676

 
$
5,676

State and local
1,372

 
527

 
1,899

Non-United States
90,029

 
9,159

 
99,188

Total
$
91,401

 
$
15,362

 
$
106,763

The provisions for tax expense for the years ended December 31, 2016, 2015, and 2014 differed from the amounts computed by applying the United States federal income tax rate of 35% to the earnings before taxes as a result of the following:
 
2016
 
2015
 
2014
Expected tax
$
176,467

 
$
162,198

 
$
155,751

United States state and local income taxes, net of federal income tax benefit
3,064

 
2,551

 
1,899

Change in valuation allowance

 
(1,098
)
 
(172
)
Non-United States income taxes at other than a 35% rate
(65,917
)
 
(54,798
)
 
(51,360
)
Other, net
6,209

 
1,751

 
645

Total provision for taxes
$
119,823

 
$
110,604

 
$
106,763


F - 32

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The tax effects of temporary differences that give rise to significant portions of the deferred tax assets and deferred tax liabilities are presented below at December 31:
 
2016
 
2015
Deferred tax assets:
 

 
 

Inventory
$
17,612

 
$
14,491

Accrued and other liabilities
93,379

 
89,605

Accrued post-retirement benefit and pension costs
72,004

 
59,175

Net operating loss and tax credit carryforwards
15,844

 
32,818

Other
10,326

 
9,778

Total deferred tax assets
209,165

 
205,867

Less valuation allowance
(10,730
)
 
(25,435
)
Total deferred tax assets less valuation allowance
198,435

 
180,432

Deferred tax liabilities:
 

 
 

Inventory
3,741

 
3,946

Property, plant, and equipment
56,718

 
57,373

Rainin intangibles amortization
77,295

 
71,388

Prepaid post-retirement benefit and pension costs
36,741

 
30,884

International earnings
19,575

 
14,998

Unrealized currency gains
34,720

 
19,768

Total deferred tax liabilities
228,790

 
198,357

Net deferred tax (liability) asset
$
(30,355
)
 
$
(17,925
)
A reconciliation of the beginning and end amounts of unrecognized tax benefits is as follows:
 
2016
 
2015
Unrecognized tax benefits at beginning of year
$
15,259

 
$
16,864

Increases related to current tax positions
7,824

 
2,676

Increases (decreases) related to prior year tax positions
(885
)
 
186

Decreases relating to taxing authority settlements
(794
)
 
(1,102
)
Decreases resulting from a lapse of the applicable statute of limitations
(896
)
 
(2,764
)
Other, net
(268
)
 
(601
)
Unrecognized tax benefits at end of year
$
20,240

 
$
15,259

Included in the balance of unrecognized tax benefits at December 31, 2016 and 2015 were $16.6 million and $12.0 million, respectively, of tax benefits that if recognized would reduce the Company’s effective tax rate. The Company recognizes accrued amounts of interest and penalties related to its uncertain tax positions as part of its income tax expense within its consolidated statement of operations. The amount of accrued interest and penalties included within other non-current liabilities within the Company’s consolidated balance sheet as of December 31, 2016 and 2015 was $2.2 million and $1.9 million, respectively.
The Company believes that it is reasonably possible that the unrecognized tax benefit balance could change over the next twelve months, primarily related to potential disputes raised by the taxing authorities over income and expense recognition. The Company does not expect a change would have a material impact on its financial position, results of operations, or cash flows.

F - 33

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


The Company has recorded valuation allowances related to certain of its deferred income tax assets due to the uncertainty of the ultimate realization of future benefits from such assets. The potential decrease or increase of the valuation allowance in the near term is dependent on the future ability of the Company to realize the deferred tax assets that are affected by the future profitability of operations in various worldwide jurisdictions. The $14.7 million decrease in the total valuation allowance during 2016 is primarily attributable to changes in the foreign tax credit carryforward and foreign currency fluctuation.
The deferred tax assets and valuation allowance as of December 31, 2016 do not include certain deferred tax assets that arose directly from (or the use of which was postponed by) tax deductions related to equity compensation in excess of compensation expense recorded. With the adoption of ASU 2016-09 in the first quarter of 2017, deferred tax assets will be recorded for previously unrecognized excess tax benefits outstanding at December 31, 2016 which we expect to be offset by a valuation allowance.
At December 31, 2016, the Company has various U.S. state net operating losses and various foreign net operating losses that have various expiration periods.
The Company plans to repatriate earnings from China, Switzerland, Germany, the United Kingdom, and certain other countries in future years and believes that there will be no additional cost associated with the repatriation of such foreign earnings other than withholding taxes. All other undistributed earnings are considered to be permanently reinvested on which no U.S. deferred income taxes or foreign withholding taxes have been provided. It is not practicable to estimate the amount of deferred tax liability related to these undistributed earnings due to the complexity of the calculation and the uncertainty regarding assumptions necessary to compute the tax. As of December 31, 2016, we had an immaterial amount of cash and cash equivalents in foreign subsidiaries where undistributed earnings are considered permanently reinvested. Accordingly, we believe the impact associated with not repatriating our undistributed foreign earnings will not have a material effect on our liquidity.
As of December 31, 2016, the major jurisdictions for which the Company is subject to examinations are Germany for years after 2013, the United States after 2013, France after 2012, Switzerland after 2012, the United Kingdom after 2014, and China after 2013. Additionally, the Company is currently under examination in various taxing jurisdictions in which it conducts business operations. While the Company has not yet received any material assessments from these taxing authorities, the Company believes that adequate amounts of taxes and related interest and penalties have been provided for any adverse adjustments as a result of these examinations and that the ultimate outcome of these examinations will not result in a material impact on the Company’s consolidated results of operations or financial position.

14.    RESTRUCTURING CHARGES
During the past few years, we initiated additional cost reduction measures in response to global economic conditions. For the years ended December 31, 2016 and 2015, we have incurred $6.2 million and $11.1 million, respectively, of restructuring expenses which primarily comprise employee related costs. Liabilities related to restructuring activities are included in accrued and other liabilities in the consolidated balance sheet.

F - 34

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


A rollforward of the Company’s accrual for restructuring activities for the years ended December 31, 2016 and 2015 is as follows:
 
 
Total
Balance at December 31, 2014
 
$
8,436

Restructuring charges
 
11,148

Cash payments / utilization
 
(6,568
)
Impact of foreign currency
 
(805
)
Balance at December 31, 2015
 
12,211

Restructuring charges
 
6,235

Cash payments / utilization
 
(8,376
)
Impact of foreign currency
 
(539
)
Balance at December 31, 2016
 
$
9,531


15.    OTHER CHARGES (INCOME), NET
Other charges (income), net for 2016 includes a one-time non-cash pension settlement charge of $8.2 million related to a lump sum offering to former employees of our U.S. pension plan and acquisition transaction costs of $1.1 million. Other charges (income), net also includes (gains) losses from foreign currency transactions and hedging activity, interest income, and other items.

16.    COMMITMENTS AND CONTINGENCIES
Operating Leases
The Company leases certain of its facilities and equipment under operating leases. The future minimum lease payments under non-cancelable operating leases are as follows at December 31, 2016:
2017
$
30,177

2018
25,814

2019
17,605

2020
13,040

2021
10,635

Thereafter
14,117

Total
$
111,388

Rent expense for operating leases amounted to $34.9 million, $33.2 million, and $34.9 million for the years ended December 31, 2016, 2015, and 2014, respectively.
Legal
The Company is party to various legal proceedings, including certain environmental matters, incidental to the normal course of business. Management does not expect that any of such proceedings will have a material adverse effect on the Company’s financial condition, results of operations, or cash flows.

F - 35

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


17.    SEGMENT REPORTING
The Company has five reportable segments: U.S. Operations, Swiss Operations, Western European Operations, Chinese Operations, and Other. U.S. Operations represent certain of the Company’s marketing and producing organizations located in the United States. Western European Operations include the Company’s marketing and producing organizations in Western Europe, excluding operations located in Switzerland. Swiss Operations include marketing and producing organizations located in Switzerland as well as extensive R&D operations that are responsible for the development, production, and marketing of precision instruments, including weighing, analytical, and measurement technologies for use in a variety of laboratory and industrial applications. Chinese Operations represent the Company’s marketing and producing organizations located in China. The Company’s market organizations are geographically focused and are responsible for all aspects of the Company’s sales and service. Operations that exist outside these reportable segments are included in Other.
The accounting policies of the operating segments are the same as those described in the summary of significant accounting policies. The Company evaluates performance based on segment profit for segment reporting (gross profit less research and development and selling, general, and administrative expenses, before amortization, interest expense, restructuring charges, other charges (income), net, and taxes). Inter-segment sales and transfers are priced to reflect consideration of market conditions and the regulations of the countries in which the transferring entities are located.
The following tables show the operations of the Company’s reportable segments:
For the Year Ended December 31, 2016
 
Net Sales to
External
Customers
 
Net Sales to
Other
Segments
 
Total Net
Sales
 
Segment
Profit
 
Depreciation
 
Total Assets
 
Purchase of
Property, Plant
and Equipment
 
Goodwill
 
 
 
 
 
 
 
 
U.S. Operations
 
$
867,962

 
$
90,580

 
$
958,542

 
$
161,539

 
$
6,094

 
$
1,747,338

 
$
(52,255
)
 
$
357,785

Swiss Operations
 
130,674

 
524,983

 
655,657

 
163,663

 
6,199

 
1,212,637

 
(7,260
)
 
21,239

Western European Operations
 
640,558

 
176,501

 
817,059

 
123,507

 
4,048

 
1,120,751

 
(6,857
)
 
82,500

Chinese Operations
 
386,541

 
219,766

 
606,307

 
187,924

 
6,879

 
702,571

 
(16,288
)
 
636

Other(a)
 
482,522

 
7,709

 
490,231

 
64,060

 
3,461

 
277,476

 
(4,540
)
 
14,218

Eliminations and Corporate(b)
 

 
(1,019,539
)
 
(1,019,539
)
 
(117,696
)
 
6,062

 
(2,893,996
)
 
(36,757
)
 

Total
 
$
2,508,257

 
$

 
$
2,508,257

 
$
582,997

 
$
32,743

 
$
2,166,777

 
$
(123,957
)
 
$
476,378


For the Year Ended December 31, 2015
 
Net Sales to
External
Customers
 
Net Sales to
Other
Segments
 
Total Net
Sales (c)
 
Segment
Profit (c)
 
Depreciation
 
Total Assets
 
Purchase of
Property, Plant
and Equipment
 
Goodwill
 
 
 
 
 
 
 
 
U.S. Operations
 
$
826,354

 
$
87,488

 
$
913,842

 
$
147,491

 
$
6,153

 
$
1,487,422

 
$
(7,113
)
 
$
317,856

Swiss Operations
 
133,684

 
498,642

 
632,326

 
160,763

 
6,488

 
1,134,648

 
(6,650
)
 
21,841

Western European Operations
 
620,128

 
165,532

 
785,660

 
107,424

 
4,076

 
1,010,639

 
(5,940
)
 
92,389

Chinese Operations
 
376,291

 
214,887

 
591,178

 
165,532

 
7,086

 
506,390

 
(14,770
)
 
692

Other(a)
 
438,990

 
8,087

 
447,077

 
50,821

 
2,883

 
260,276

 
(4,306
)
 
13,506

Eliminations and Corporate(b)
 

 
(974,636
)
 
(974,636
)
 
(99,924
)
 
6,401

 
(2,440,040
)
 
(43,727
)
 

Total
 
$
2,395,447

 
$

 
$
2,395,447

 
$
532,107

 
$
33,087

 
$
1,959,335

 
$
(82,506
)
 
$
446,284



F - 36

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


For the Year Ended December 31, 2014
 
Net Sales to
External
Customers
 
Net Sales to
Other
Segments
 
Total Net
Sales (c)
 
Segment
Profit (c)
 
Depreciation
 
Total Assets
 
Purchase of
Property, Plant
and Equipment
 
Goodwill
 
 
 
 
 
 
 
 
U.S. Operations
 
$
757,243

 
$
90,463

 
$
847,706

 
$
123,278

 
$
6,068

 
$
1,368,835

 
$
(6,627
)
 
$
308,861

Swiss Operations
 
137,756

 
549,785

 
687,541

 
149,987

 
6,621

 
1,016,416

 
(6,567
)
 
21,873

Western European Operations
 
708,755

 
194,297

 
903,052

 
119,603

 
4,422

 
1,052,435

 
(5,581
)
 
99,341

Chinese Operations
 
415,474

 
164,083

 
579,557

 
163,832

 
6,746

 
813,052

 
(19,793
)
 
740

Other(a)
 
466,755

 
7,527

 
474,282

 
52,869

 
2,820

 
252,776

 
(3,315
)
 
13,270

Eliminations and Corporate(b)
 

 
(1,006,155
)
 
(1,006,155
)
 
(102,698
)
 
6,940

 
(2,529,982
)
 
(47,505
)
 

Total
 
$
2,485,983

 
$

 
$
2,485,983

 
$
506,871

 
$
33,617

 
$
1,973,532

 
$
(89,388
)
 
$
444,085

(a)
Other includes reporting units in Southeast Asia, Latin America, Eastern Europe and other countries.
(b)
Eliminations and Corporate includes the elimination of inter-segment transactions as well as certain corporate expenses and intercompany investments, which are not included in the Company’s operating segments.
(c)
2015 and 2014 net sales and segment profit have been reclassified to conform to the current period.
A reconciliation of earnings before taxes to segment profit follows:
 
2016
 
2015
 
2014
Earnings before taxes
$
504,193

 
$
463,424

 
$
445,004

Amortization
36,052

 
30,951

 
29,185

Interest expense
28,026

 
27,451

 
24,537

Restructuring charges
6,235

 
11,148

 
5,915

Other charges (income), net
8,491

 
(867
)
 
2,230

Segment profit
$
582,997

 
$
532,107

 
$
506,871

During 2016, restructuring charges of $6.2 million were recognized, of which $2.0 million, $1.5 million, $2.4 million, $0.2 million, and $0.2 million relate to the Company’s U.S., Swiss, Western European, Chinese, and Other Operations, respectively. Restructuring charges of $11.1 million were recognized in 2015, of which $0.6 million, $2.4 million, $2.6 million, $4.7 million, and $0.8 million relate to the Company's U.S., Swiss, Western European, Chinese, and Other Operations, respectively.
The Company sells precision instruments, including weighing instruments and certain analytical and measurement technologies, and related services to a variety of customers and industries. None of these end-customers account for more than 1% of net sales. Service revenues are primarily derived from repair and other services including regulatory compliance qualification, calibration, certification, and preventative maintenance.
A breakdown of the Company's sales by product category for the years ended December 31 follows:
 
2016
 
2015
 
2014
Laboratory
$
1,225,000

 
$
1,154,905

 
$
1,161,207

Industrial
1,067,858

 
1,034,310

 
1,107,606

Retail
215,399

 
206,232

 
217,170

Total net sales
$
2,508,257

 
$
2,395,447

 
$
2,485,983


F - 37

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


In certain circumstances, our operating segments sell directly into other geographies. A breakdown of net sales to external customers by geographic customer destination and property, plant, and equipment, net for the years ended December 31 follows:
 
Net Sales
 
Property, Plant, and
Equipment, Net
 
2016
 
2015
 
2014
 
2016
 
2015
United States
$
815,153

 
$
768,815

 
$
708,293

 
$
168,494

 
$
132,255

Other Americas
153,607

 
157,962

 
166,150

 
3,833

 
4,120

Total Americas
968,760

 
926,777

 
874,443

 
172,327

 
136,375

Germany
182,644

 
176,491

 
204,747

 
28,393

 
29,100

France
118,681

 
110,477

 
127,363

 
5,009

 
5,174

United Kingdom
61,513

 
71,679

 
77,271

 
12,631

 
15,854

Switzerland
62,115

 
64,622

 
71,347

 
246,312

 
233,763

Other Europe
374,008

 
349,178

 
398,645

 
6,511

 
6,158

Total Europe
798,961

 
772,447

 
879,373

 
298,856

 
290,049

China
374,996

 
362,950

 
404,293

 
83,713

 
82,528

Rest of World
365,540

 
333,273

 
327,874

 
8,811

 
8,277

Total Asia/Rest of World
740,536

 
696,223

 
732,167

 
92,524

 
90,805

Total
$
2,508,257

 
$
2,395,447

 
$
2,485,983

 
$
563,707

 
$
517,229



F - 38

Table of Contents
METTLER-TOLEDO INTERNATIONAL INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS - (Continued)
(In thousands, except share data, unless otherwise stated)


18.    QUARTERLY FINANCIAL DATA (UNAUDITED)
Quarterly financial data for the years ended December 31, 2016 and 2015 are as follows:
 
First Quarter
 
Second Quarter
 
Third Quarter
 
Fourth Quarter
2016
 

 
 

 
 

 
 

Net sales
$
539,674

 
$
608,286

 
$
650,598

 
$
709,699

Gross profit
299,907

 
347,576

 
369,494

 
418,610

Net earnings
$
65,674

 
$
79,588

 
$
101,332

 
$
137,776

Basic earnings per common share:
 
 
 
 
 
 
 
Net earnings
$
2.44

 
$
2.99

 
$
3.84

 
$
5.27

Weighted average number of common shares
26,931,293

 
26,631,015

 
26,375,468

 
26,139,024

Diluted earnings per common share:
 
 
 
 
 
 
 
Net earnings
$
2.40

 
$
2.93

 
$
3.77

 
$
5.17

Weighted average number of common and common equivalent shares
27,421,019

 
27,143,284

 
26,888,810

 
26,631,269

Market price per share:
 
 
 
 
 
 
 
High
$
347.09

 
$
385.50

 
$
419.83

 
$
429.91

Low
$
298.14

 
$
347.76

 
$
363.19

 
$
397.73

 
 
 
 
 
 
 
 
2015
 

 
 

 
 

 
 

Net sales
$
535,701

 
$
582,057

 
$
604,154

 
$
673,535

Gross profit
298,805

 
322,912

 
339,529

 
390,747

Net earnings
$
63,051

 
$
77,557

 
$
88,861

 
$
123,351

Basic earnings per common share:
 

 

 
 

 
 

Net earnings
$
2.24

 
$
2.79

 
$
3.23

 
$
4.53

Weighted average number of common shares
28,115,220

 
27,843,905

 
27,547,734

 
27,228,026

Diluted earnings per common share:
 

 

 
 

 
 

Net earnings
$
2.19

 
$
2.73

 
$
3.16

 
$
4.44

Weighted average number of common and common equivalent shares
28,762,935

 
28,460,336

 
28,113,287

 
27,755,045

Market price per share:
 

 

 
 

 
 

High
$
331.84

 
$
343.44

 
$
346.92

 
$
345.75

Low
$
289.09

 
$
317.01

 
$
277.62

 
$
283.27



F - 39

Table of Contents

Schedule II — Valuation and Qualifying Accounts (in thousands)
Column A
 
Column B
 
Column C
 
Column D
 
Column E
 
 
 
 
Additions
 
 
 
 
 
 
 
 
(1)
 
(2)
 
 
 
 
 
 
Balance at the
Beginning of
Period
 
Charged to
Costs and Expenses
 
Charged to
Other Accounts
 
 
 
Balance at End
of Period
Description
 
 
 
 
-Deductions-
 
 
 
 
 
 
 
Note (A)
 
Note (B)
 
 
Accounts receivable — allowance for doubtful accounts:
 
 

 
 

 
 

 
 

 
 

Year ended December 31, 2016
 
$
14,435

 
$
1,087

 
$
(760
)
 
$
528

 
$
14,234

Year ended December 31, 2015
 
$
15,961

 
$
883

 
$
(2,302
)
 
$
107

 
$
14,435

Year ended December 31, 2014
 
$
14,856

 
$
2,453

 
$
(784
)
 
$
564

 
$
15,961

Deferred tax valuation allowance:
 
 

 
 

 
 

 
 

 
 

Year ended December 31, 2016
 
$
25,435

 
$

 
$

 
$
14,705

 
$
10,730

Year ended December 31, 2015
 
$
36,263

 
$

 
$

 
$
10,828

 
$
25,435

Year ended December 31, 2014
 
$
31,697

 
$

 
$
5,191

 
$
625

 
$
36,263

_______________________________________
Note (A)
For accounts receivable, amounts comprise currency translation adjustments.
For deferred tax valuation allowance in 2016, 2015, and 2014, amounts relate primarily to changes in foreign tax credit carryforwards and foreign currency differences recorded through other comprehensive income.
Note (B)
For accounts receivable, amounts represent excess of uncollectible balances written off over recoveries of accounts previously written off.
For deferred tax valuation allowance, the decrease in 2016, 2015, and 2014 relates primarily to decreases in foreign tax credit carryforwards.


S- 1