MICRON TECHNOLOGY INC - Quarter Report: 2021 June (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q


(Mark One)
☒			QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 3, 2021


☐			TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number 1-10658

Micron Technology, Inc.

(Exact name of registrant as specified in its charter)

Delaware

75-1618004

(State or other jurisdiction of incorporation or organization)

(I.R.S. Employer Identification No.)

8000 S. Federal Way, Boise, Idaho

83716-9632

(Address of principal executive offices)

(Zip Code)

(Registrant’s telephone number, including area code)

(208) 368-4000

Securities registered pursuant to Section 12(b) of the Act:

Title of each class

Trading Symbol

Name of each exchange on which registered

Common Stock, par value $0.10 per share

Nasdaq Global Select Market

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes

☒

☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes

☒

☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large Accelerated Filer

Accelerated Filer

Non-Accelerated Filer

Smaller Reporting Company

Emerging Growth Company

☒

☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.

☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes

☐

☒

The number of outstanding shares of the registrant’s common stock as of June 24, 2021 was 1,125,753,560.


Micron Corporate Profile












Founded over 40 years ago on October 5, 1978 Headquartered in Boise, Idaho, USA 4th Largest semiconductor company in the world* 135 On the 2021 Fortune 500 44,000+ Patents granted and growing 17 Countries 13 Manufacturing sites and 14 customer labs ~40,000 Team members
						It’s All About Data
						Data is today’s new business currency, and memory and storage are strategic differentiators which will redefine how we extract value from data to expand the global economy and transform our society.
						Who We Are
						Micron designs, develops, and manufactures industry-leading memory and storage products. By providing foundational capability for innovations like AI and 5G across data center, the intelligent edge, and consumer devices, we unlock innovation across industries including healthcare, automotive, and communications. Our technology and expertise are central to maximizing value from cutting-edge computing applications and new business models which disrupt and advance the industry.
						Our Vision
						As a global leader in memory and storage solutions, we are transforming how the world uses information to enrich life for all. By advancing technologies to collect, store, and manage data with unprecedented speed and efficiency, we lead the transformation of data to information intelligence. In a world of change, we remain nimble, delivering products that help inspire the world to learn, communicate, and advance faster than ever.
						Our Commitment
Based on Gartner Market Share: Semiconductors by End Market, Worldwide, 2020 (April 2021), excluding IP/software revenue. *Micron data as of September 3, 2020.						The world has come to expect our delivery of innovative solutions and our customers depend on our integrity. We rededicate ourselves daily to demonstrating our environmental conscience, an inclusive team culture where all voices are heard and respected, and engaging in our communities to enrich life for all.

Media Inquiries mediarelations@micron.com Government Inquiries govaffairs@micron.com Investor Inquiries investorrelations@micron.com						Global Product Portfolio
						DRAM \| NAND \| NOR \| Solid-State Drives \| Graphics and High Bandwidth Memory (HBM) \| Managed NAND and Multichip Packages
						Connect with us on micron.com

© 2021 Micron Technology, Inc. All rights reserved. Information, products, and/or specifications are subject to change without notice. Micron, the Micron logo, and all other Micron trademarks are the property of Micron Technology, Inc. All other trademarks are the property of their respective owners. Rev 06/21 CCMMD-1707390403-3712

Table of Contents



Introduction		2
Part I. Financial Information
Item 1.	Financial Statements:
	Consolidated Statements of Operations	4
	Consolidated Statements of Comprehensive Income	5
	Consolidated Balance Sheets	6
	Consolidated Statements of Changes in Equity	7
	Consolidated Statements of Cash Flows	9
	Notes to Consolidated Financial Statements	10
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	28
	Results of Operations	31
	Liquidity and Capital Resources	35
Item 3.	Quantitative and Qualitative Disclosures about Market Risk	37
Item 4.	Controls and Procedures	38
Part II. Other Information
Item 1.	Legal Proceedings	38
Item 1A.	Risk Factors	38
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	57
Item 6.	Exhibits	58
Signatures		59

Definitions of Commonly Used Terms

As used herein, “we,” “our,” “us,” and similar terms include Micron Technology, Inc. and its consolidated subsidiaries, unless the context indicates otherwise. Abbreviations, terms, or acronyms are commonly used or found in multiple locations throughout this report and include the following:

Term

Definition

Term

Definition

2023 Notes

2.497% Senior Notes due 2023

IMFT

IM Flash Technologies, LLC

2024 Notes

4.640% Senior Notes due 2024

Inotera

Inotera Memories, Inc.

2024 Term Loan A

Senior Term Loan A due 2024 entered into on May 14, 2021

Intel

Intel Corporation

2025 Notes

5.500% Senior Notes due 2025

LIBOR

London Interbank Offered Rate

2026 Notes

4.975% Senior Notes due 2026

LPDRAM

Low-power DRAM

2027 Notes

4.185% Senior Notes due 2027

MCP

Multichip packaged solutions with managed NAND and LPDRAM

2029 Notes

5.327% Senior Notes due 2029

Micron

Micron Technology, Inc. (Parent Company)

2030 Notes

4.663% Senior Notes due 2030

MMJ

Micron Memory Japan, G.K.

2032D Notes

3.125% Convertible Senior Notes due 2032

Revolving Credit Facility

$2.5 billion Revolving Credit Facility due May 2026

DDR

Double Data Rate

SOFR

Secured Overnight Financing Rate

EBITDA

Earnings before interest, taxes, depreciation, and amortization

SSD

Solid State Drive

Extinguished 2024 Term Loan A

Senior Term Loan A due 2024 repaid on May 14, 2021

Texas Instruments Incorporated

GDDR

Graphics Double Data Rate

Micron Technology, Inc., including its consolidated subsidiaries, is an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all. With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience.

Micron, Crucial, any associated logos, and all other Micron trademarks are the property of Micron. Intel and 3D XPoint are trademarks of Intel Corporation or its subsidiaries. Other product names or trademarks that are not owned by Micron are for identification purposes only and may be the trademarks of their respective owners.

Available Information

Investors and others should note that we announce material financial information about our business and products through a variety of means, including our investor relations website (investors.micron.com), filings with the U.S. Securities and Exchange Commission (the “SEC”), press releases, public conference calls, and webcasts. We use these channels to achieve broad, non-exclusionary distribution of information to the public and for complying with our disclosure obligations under Regulation FD. Therefore, we encourage investors, the media, and others interested in our company to review the information we post on such channels.

2 | 2021 Q3 10-Q

Forward-Looking Statements

This Form 10-Q contains trend information and other forward-looking statements that involve a number of risks and uncertainties. Such forward-looking statements may be identified by words such as "anticipate," "expect," "intend," "pledge," "committed," "plans," "opportunities," "future," "believe," "target," "on track," "estimate," "continue," "likely," "may," "will," "would," "should," "could," and variations of such words and similar expressions. Specific forward-looking statements include, but are not limited to, statements such as those made regarding the impact of coronavirus disease 2019 (“COVID-19”) to our business; the completion of and timing for closing the pending sale of our Lehi facility; the sufficiency of our cash and investments; and capital spending in 2021. Our actual results could differ materially from our historical results and those discussed in the forward-looking statements. Factors that could cause actual results to differ materially include, but are not limited to, those identified in “Part II. Other Information – Item 1A. Risk Factors.”

PART I. FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS

Micron Technology, Inc.

Consolidated Statements of Operations

(In millions, except per share amounts)

(Unaudited)


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Revenue	$	7,422	$	5,438	$	19,431	$	15,379
Cost of goods sold	4,296		3,675		12,920		10,895
Gross margin	3,126		1,763		6,511		4,484

Research and development	670		649		1,958		1,970
Selling, general, and administrative	230		216		658		650
Restructure and asset impairments	453		4		466		10
Other operating (income) expense, net	(26)		6		101		8
Operating income	1,799		888		3,328		1,846

Interest income	8		23		28		101
Interest expense	(46)		(51)		(136)		(144)
Other non-operating income (expense), net	45		10		62		55
	1,806		870		3,282		1,858

Income tax (provision) benefit	(65)		(68)		(164)		(144)
Equity in net income (loss) of equity method investees	(6)		3		23		6
Net income	1,735		805		3,141		1,720

Net income attributable to noncontrolling interests	—		(2)		—		(21)
Net income attributable to Micron	$	1,735	$	803	$	3,141	$	1,699

Earnings per share
Basic	$	1.55	$	0.72	$	2.81	$	1.53
Diluted	1.52		0.71		2.75		1.50

Number of shares used in per share calculations
Basic	1,121		1,111		1,119		1,110
Diluted	1,145		1,129		1,141		1,131

See accompanying notes to consolidated financial statements.

4 | 2021 Q3 10-Q

Micron Technology, Inc.

Consolidated Statements of Comprehensive Income

(In millions)

(Unaudited)


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Net income	$	1,735	$	805	$	3,141	$	1,720

Other comprehensive income (loss), net of tax
Gains (losses) on derivative instruments	(32)		(3)		(20)		(18)
Gains (losses) on investments	(2)		2		(6)		—
Pension liability adjustments	—		(1)		1		(2)
Cumulative translation adjustments	—		—		1		—
Other comprehensive income (loss)	(34)		(2)		(24)		(20)
Total comprehensive income	1,701		803		3,117		1,700
Comprehensive income attributable to noncontrolling interests	—		(2)		—		(21)
Comprehensive income attributable to Micron	$	1,701	$	801	$	3,117	$	1,679

See accompanying notes to consolidated financial statements.

Micron Technology, Inc.

Consolidated Balance Sheets

(In millions, except par value amounts)

(Unaudited)


As of	June 3, 2021		September 3, 2020

Assets
Cash and equivalents	$	7,759	$	7,624
Short-term investments	590		518
Receivables	4,231		3,912
Inventories	4,537		5,373
Assets held for sale	966		—
Other current assets	478		538
Total current assets	18,561		17,965
Long-term marketable investments	1,399		1,048
Property, plant, and equipment	32,209		31,031
Operating lease right-of-use assets	558		584
Intangible assets	350		334
Deferred tax assets	822		707
Goodwill	1,228		1,228
Other noncurrent assets	816		781
Total assets	$	55,943	$	53,678

Liabilities and equity
Accounts payable and accrued expenses	$	4,427	$	5,817
Current debt	297		270
Other current liabilities	738		548
Total current liabilities	5,462		6,635
Long-term debt	6,418		6,373
Noncurrent operating lease liabilities	513		533
Noncurrent unearned government incentives	722		643
Other noncurrent liabilities	569		498
Total liabilities	13,684		14,682

Commitments and contingencies

Shareholders’ equity
Common stock, $0.10 par value, 3,000 shares authorized, 1,203 shares issued and 1,120 outstanding (1,194 shares issued and 1,113 outstanding as of September 3, 2020)	120		119
Additional capital	9,285		8,917
Retained earnings	36,452		33,384
Treasury stock, 83 shares held (81 shares held as of September 3, 2020)	(3,645)		(3,495)
Accumulated other comprehensive income (loss)	47		71
Total equity	42,259		38,996
Total liabilities and equity	$	55,943	$	53,678

See accompanying notes to consolidated financial statements.

6 | 2021 Q3 10-Q

Micron Technology, Inc.

Consolidated Statements of Changes in Equity

(In millions)

(Unaudited)


	Common Stock			Additional Capital		Retained Earnings		Treasury Stock		Accumulated Other Comprehensive Income (Loss)		Total Shareholders’ Equity
	Number of Shares	Amount

Balance at September 3, 2020	1,194	$	119	$	8,917	$	33,384	$	(3,495)	$	71	$	38,996
Net income	—	—		—		803		—		—		803
Other comprehensive income (loss), net	—	—		—		—		—		39		39
Stock issued under stock plans	5	1		33		—		—		—		34
Stock-based compensation expense	—	—		92		—		—		—		92
Repurchase of stock	(1)	—		(8)		(49)		—		—		(57)
Balance at December 3, 2020	1,198	$	120	$	9,034	$	34,138	$	(3,495)	$	110	$	39,907
Net income	—	—		—		603		—		—		603
Other comprehensive income (loss), net	—	—		—		—		—		(29)		(29)
Stock issued under stock plans	4	—		105		—		—		—		105
Stock-based compensation expense	—	—		97		—		—		—		97
Repurchase of stock	—	—		(2)		(18)		—		—		(20)
Balance at March 4, 2021	1,202	$	120	$	9,234	$	34,723	$	(3,495)	$	81	$	40,663
Net income	—	—		—		1,735		—		—		1,735
Other comprehensive income (loss), net	—	—		—		—		—		(34)		(34)
Stock issued under stock plans	1	—		8		—		—		—		8
Stock-based compensation expense	—	—		96		—		—		—		96
Repurchase of stock	—	—		(1)		(6)		(150)		—		(157)
Cash settlement of convertible notes	—	—		(52)		—		—		—		(52)
Balance at June 3, 2021	1,203	$	120	$	9,285	$	36,452	$	(3,645)	$	47	$	42,259

See accompanying notes to consolidated financial statements.

Micron Technology, Inc.

Consolidated Statements of Changes in Equity

(In millions)

(Unaudited)


	Micron Shareholders
	Common Stock			Additional Capital		Retained Earnings		Treasury Stock		Accumulated Other Comprehensive Income (Loss)		Total Micron Shareholders’ Equity		Noncontrolling Interest in Subsidiary		Total Equity
	Number of Shares	Amount

Balance at August 29, 2019	1,182	$	118	$	8,214	$	30,761	$	(3,221)	$	9	$	35,881	$	889	$	36,770
Net income	—	—		—		491		—		—		491		15		506
Other comprehensive income (loss), net	—	—		—		—		—		(3)		(3)		—		(3)
Stock issued under stock plans	3	1		31		—		—		—		32		—		32
Stock-based compensation expense	—	—		72		—		—		—		72		—		72
Repurchase of stock	—	—		(6)		(34)		(50)		—		(90)		—		(90)
Acquisition of noncontrolling interest	—	—		123		—		—		—		123		(904)		(781)
Cash settlement of convertible notes	—	—		(6)		—		—		—		(6)		—		(6)
Balance at November 28, 2019	1,185	$	119	$	8,428	$	31,218	$	(3,271)	$	6	$	36,500	$	—	$	36,500
Net income	—	—		—		405		—		—		405		—		405
Other comprehensive income (loss), net	—	—		—		—		—		(15)		(15)		—		(15)
Stock issued under stock plans	7	—		121		—		—		—		121		—		121
Stock-based compensation expense	—	—		85		—		—		—		85		—		85
Repurchase of stock	(1)	—		(4)		(21)		(45)		—		(70)		—		(70)
Settlement of capped calls	—	—		98		—		(98)		—		—		—		—
Cash settlement of convertible notes	—	—		(3)		—		—		—		(3)		—		(3)
Balance at February 27, 2020	1,191	$	119	$	8,725	$	31,602	$	(3,414)	$	(9)	$	37,023	$	—	$	37,023
Net income	—	—		—		803		—		—		803		—		803
Other comprehensive income (loss), net	—	—		—		—		—		(2)		(2)		—		(2)
Stock issued under stock plans	1	—		4		—		—		—		4		—		4
Stock-based compensation expense	—	—		82		—		—		—		82		—		82
Repurchase of stock	—	—		—		(3)		(40)		—		(43)		—		(43)
Cash settlement of convertible notes	—	—		(47)		—		—		—		(47)		—		(47)
Balance at May 28, 2020	1,192	$	119	$	8,764	$	32,402	$	(3,454)	$	(11)	$	37,820	$	—	$	37,820

See accompanying notes to consolidated financial statements.

8 | 2021 Q3 10-Q

Micron Technology, Inc.

Consolidated Statements of Cash Flows

(In millions)

(Unaudited)


Nine months ended	June 3, 2021		May 28, 2020

Cash flows from operating activities
Net income	$	3,141	$	1,720
Adjustments to reconcile net income to net cash provided by operating activities
Depreciation expense and amortization of intangible assets	4,593		4,083
Amortization of debt discount and other costs	22		20
Restructure and asset impairments	446		(7)
Stock-based compensation	285		239
(Gain) loss on debt prepayments, repurchases, and conversions	1		(40)
Change in operating assets and liabilities
Receivables	(340)		(461)
Inventories	814		(248)
Accounts payable and accrued expenses	(309)		700
Deferred income taxes, net	(94)		26
Other	25		3
Net cash provided by operating activities	8,584		6,035

Cash flows from investing activities
Expenditures for property, plant, and equipment	(8,015)		(5,943)
Purchases of available-for-sale securities	(1,919)		(793)
Proceeds from maturities of available-for-sale securities	1,024		636
Proceeds from sales of available-for-sale securities	473		1,157
Proceeds from government incentives	335		140
Other	47		(48)
Net cash provided by (used for) investing activities	(8,055)		(4,851)

Cash flows from financing activities
Repayments of debt	(1,344)		(4,286)
Payments on equipment purchase contracts	(139)		(49)
Acquisition of noncontrolling interest in IMFT	—		(744)
Proceeds from issuance of debt	1,188		5,000
Other	(142)		(56)
Net cash provided by (used for) financing activities	(437)		(135)

Effect of changes in currency exchange rates on cash, cash equivalents, and restricted cash	44		(8)

Net increase (decrease) in cash, cash equivalents, and restricted cash	136		1,041
Cash, cash equivalents, and restricted cash at beginning of period	7,690		7,279
Cash, cash equivalents, and restricted cash at end of period	$	7,826	$	8,320

See accompanying notes to consolidated financial statements.

Micron Technology, Inc.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(All tabular amounts in millions, except per share amounts)

(Unaudited)

Significant Accounting Policies

For a discussion of our significant accounting policies, see “Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Significant Accounting Policies” of our Annual Report on Form 10-K for the year ended September 3, 2020. Except for the significant accounting policy associated with inventories as discussed below, there have been no changes to our significant accounting policies since our Annual Report on Form 10-K for the year ended September 3, 2020.

Basis of Presentation

The accompanying consolidated financial statements include the accounts of Micron and our consolidated subsidiaries and have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”) consistent in all material respects with those applied in our Annual Report on Form 10-K for the year ended September 3, 2020, except for changes in accounting and presentation of inventories. See “Inventories” below for changes to our significant accounting policies, and the “Inventories” note for additional information.

In the opinion of our management, the accompanying unaudited consolidated financial statements contain all necessary adjustments, consisting of a normal recurring nature, to fairly state the financial information set forth herein. Certain reclassifications have been made to prior period amounts to conform to current period presentation.

Our fiscal year is the 52 or 53-week period ending on the Thursday closest to August 31. Fiscal 2021 contains 52 weeks and our fiscal 2020 contained 53 weeks. The first three quarters of fiscal 2021 and 2020 each contained 13 weeks. All period references are to our fiscal periods unless otherwise indicated. These interim financial statements should be read in conjunction with the consolidated financial statements and accompanying notes included in our Annual Report on Form 10-K for the year ended September 3, 2020.

Through October 31, 2019, IMFT was a consolidated variable interest entity. We acquired Intel’s noncontrolling interest in IMFT on October 31, 2019, at which time IMFT became a wholly-owned subsidiary.

Inventories

Effective as of the beginning of the second quarter of 2021, we changed the method of inventory costing from average cost to first-in, first-out (“FIFO”). The difference between average cost and FIFO was not material to any previously reported financial statements. Therefore, we have recognized the cumulative effect of the change as a reduction of inventories and a charge to cost of goods sold of $133 million as of the beginning of the second quarter of 2021.

Inventories are stated at the lower of cost or net realizable value, with cost being determined on a FIFO basis. Cost includes depreciation, labor, material, and overhead costs, including product and process technology costs. When net realizable value (which requires projecting future average selling prices, sales volumes, and costs to complete products in work in process inventories) is below cost, we record a charge to cost of goods sold to write down inventories to their estimated net realizable value in advance of when inventories are actually sold. We review the major characteristics of product type and markets in determining the unit of account for which we perform the lower of cost or net realizable value analysis and categorize all inventories (including DRAM, NAND, and other memory) as a single group. We remove amounts from inventory and charge such amounts to cost of goods sold on a FIFO basis.

10 | 2021 Q3 10-Q

Recently Adopted Accounting Standards

In November 2018, the Financial Accounting Standards Board (“FASB”) issued ASU 2018-18 – Collaborative Arrangements, which clarifies that certain transactions between collaborative arrangement participants should be accounted for as revenue when the collaborative arrangement participant is a customer in the context of a unit of account and precludes recognizing as revenue consideration received from a collaborative arrangement participant if the participant is not a customer. We adopted ASU 2018-18 in the first quarter of 2021 under the retrospective adoption method to the date we adopted ASC 606, which was August 31, 2018. The adoption of this ASU did not have a significant impact on our financial statements.

In June 2016, the FASB issued ASU 2016-13 – Measurement of Credit Losses on Financial Instruments, which requires a financial asset (or a group of financial assets) measured on the basis of amortized cost to be presented at the net amount expected to be collected. This ASU requires that the income statement reflect the measurement of credit losses for newly recognized financial assets as well as the increases or decreases of expected credit losses that have taken place during the period. This ASU requires that credit losses of debt securities designated as available-for-sale be recorded through an allowance for credit losses and limits the credit loss to the amount by which fair value is below amortized cost. We adopted ASU 2016-13 in the first quarter of 2021 under the modified retrospective adoption method. The adoption of this ASU did not have a significant impact on our financial statements.

Recently Issued Accounting Standards

In August 2020, the FASB issued ASU 2020-06 – Debt – Debt with Conversion and Other Options and Derivatives and Hedging – Contracts in Entity’s Own Equity, which simplifies the accounting for convertible debt instruments by reducing the number of accounting models and the number of embedded conversion features that could be recognized separately from the primary contract. This ASU requires a convertible debt instrument to be accounted for as a single liability measured at its amortized cost, as long as no other features require bifurcation and recognition as derivatives. This ASU requires an entity to use the if-converted method in the diluted earnings per share calculation for convertible instruments. This ASU will be effective for us in the first quarter of 2023, with early adoption permitted beginning in the first quarter of 2022, and permits the use of either the modified retrospective or fully retrospective method of transition. We are evaluating the timing and effects of our adoption of this ASU on our financial statements.

Lehi, Utah Fab and 3D XPoint

In the second quarter of 2021, we updated our portfolio strategy to further strengthen our focus on memory and storage innovations for the data center market. In connection therewith, we determined that there was insufficient market validation to justify the ongoing investments required to commercialize 3D XPointTM at scale. Accordingly, we ceased development of 3D XPoint technology and engaged in discussions with potential buyers for the sale of our facility located in Lehi that was dedicated to 3D XPoint production. As a result, we classified the property, plant, and equipment as held for sale and ceased depreciating the assets. On June 30, 2021, we announced that we have entered into a definitive agreement to sell our Lehi facility to Texas Instruments for cash consideration of $900 million. The sale is anticipated to close later this calendar year.

In the third quarter of 2021, we recognized a charge of $435 million included in restructure and asset impairments (and a tax benefit of $104 million included in income tax (provision) benefit) to write down the assets held for sale to the expected consideration, net of estimated selling costs, to be realized from the sale of these assets and liabilities. The impairment charge was based on Level 3 inputs including expected consideration and the composition of assets included in the sale, which were derived from the agreement with TI. In the second quarter of 2021, we also recognized a charge of $49 million to cost of goods sold to write down 3D XPoint inventory due to our decision to cease further development of this technology.

As of June 3, 2021, the significant balances of assets held for sale in connection with our Lehi facility were as follows:


As of	June 3, 2021

Property, plant, and equipment	$	1,343
Other current assets	52
Impairment	(435)
Lehi assets held for sale	$	960

As of June 3, 2021, we also had a $51 million finance lease obligation included in the current portion of long-term debt and $12 million of other liabilities that we expect to transfer with the sale. The expected cash consideration, net of estimated selling expenses, approximates the carrying value of the net assets and liabilities expected to transfer in the sale, after giving effect to the impairment charge discussed above.

Cash and Investments

Substantially all of our marketable debt and equity investments were classified as available-for-sale as of the dates noted below. Cash and equivalents and the fair values of our available-for-sale investments, which approximated amortized costs, were as follows:


	June 3, 2021								September 3, 2020
As of	Cash and Equivalents		Short-term Investments		Long-term Marketable Investments(1)		Total Fair Value		Cash and Equivalents		Short-term Investments		Long-term Marketable Investments(1)		Total Fair Value

Cash	$	5,153	$	—	$	—	$	5,153	$	3,996	$	—	$	—	$	3,996
Level 1(2)
Money market funds	822		—		—		822		1,828		—		—		1,828
Level 2(3)
Certificates of deposit	1,763		44		—		1,807		1,740		10		2		1,752
Corporate bonds	—		285		893		1,178		3		266		592		861
Government securities	—		113		124		237		6		115		243		364
Asset-backed securities	—		73		382		455		1		31		211		243
Commercial paper	21		75		—		96		50		96		—		146
	7,759		$	590	$	1,399	$	9,748	7,624		$	518	$	1,048	$	9,190
Restricted cash(4)	67								66
Cash, cash equivalents, and restricted cash	$	7,826							$	7,690

(1)The maturities of long-term marketable securities range from one to four years.

(2)The fair value of Level 1 securities is measured based on quoted prices in active markets for identical assets.

(3)The fair value of Level 2 securities is measured using information obtained from pricing services, which obtain quoted market prices for similar instruments, non-binding market consensus prices that are corroborated by observable market data, or various other methodologies, to determine the appropriate value at the measurement date. We perform supplemental analysis to validate information obtained from these pricing services. No adjustments were made to the fair values indicated by such pricing information as of June 3, 2021 or September 3, 2020.

(4)Restricted cash is included in other noncurrent assets and primarily relates to certain government incentives received prior to being earned and for which restrictions lapse upon achieving certain performance conditions.

Gross realized gains and losses from sales of available-for-sale securities were not significant for any period presented.

12 | 2021 Q3 10-Q

In addition to the amounts included in the table above, we had $142 million and $92 million of nonmarketable equity investments without a readily determinable fair value that were included in other noncurrent assets as of June 3, 2021 and September 3, 2020, respectively. We recognized gains in other non-operating income on these nonmarketable investments of $42 million and $52 million in the third quarter and first nine months of 2021, respectively, and $14 million and $13 million in the third quarter and first nine months of 2020, respectively. These gains primarily resulted from adjustments of these investments to the value indicated by transactions in the same or similar investments.

Receivables


As of	June 3, 2021		September 3, 2020

Trade receivables	$	3,827	$	3,494
Income and other taxes	213		232
Other	191		186
	$	4,231	$	3,912

Inventories


As of	June 3, 2021		September 3, 2020

Finished goods	$	604	$	1,001
Work in process	3,479		3,854
Raw materials and supplies	454		518
	$	4,537	$	5,373

Effective as of the beginning of the second quarter of 2021, we changed our method of inventory costing from average cost to FIFO. This change in accounting principle is preferable because in an environment with continuously changing production costs FIFO more closely matches the actual cost of goods sold with the revenues from sales of those specific units, better represents the actual cost of inventories remaining on hand at any period-end, and improves comparability with our semiconductor industry peers. The change to FIFO was not material to any prior periods, nor was the cumulative effect of $133 million material to the second quarter of 2021. As such, prior periods were not retrospectively adjusted, and the cumulative effect was reported as an increase to cost of goods sold for the second quarter of 2021 of $133 million, with an offsetting reduction to beginning inventories. This charge resulted in a corresponding reduction to operating income, a $128 million reduction to net income, and an $0.11 reduction to diluted earnings per share for both the second quarter and first nine months of 2021.

Beginning in the second quarter of 2021, we changed the classification of spare parts for equipment to better align with the manner in which they are used in operations. As a result, we now present spare parts as other current assets and no longer as a component of raw materials inventories. This reclassification was applied on a retrospective basis. As a result, $256 million of spare parts were presented in other current assets as of June 3, 2021, and we reclassified $234 million of spare parts from inventories to other current assets in the accompanying balance sheet as of September 3, 2020.

Property, Plant, and Equipment


As of	June 3, 2021		September 3, 2020

Land	$	280	$	352
Buildings	13,893		13,981
Equipment(1)	49,969		48,525
Construction in progress(2)	1,553		1,600
Software	955		873
	66,650		65,331
Accumulated depreciation	(34,441)		(34,300)
	$	32,209	$	31,031

(1)Includes costs related to equipment not placed into service of $1.32 billion as of June 3, 2021 and $1.63 billion as of September 3, 2020.

(2)Includes building-related construction, tool installation, and software costs for assets not placed into service.

Intangible Assets and Goodwill


	June 3, 2021				September 3, 2020
As of	Gross Amount		Accumulated Amortization		Gross Amount		Accumulated Amortization

Product and process technology	$	663	$	(313)	$	616	$	(282)
Goodwill	1,228				1,228

In the first nine months of 2021 and 2020, we capitalized $82 million and $50 million, respectively, for product and process technology with weighted-average useful lives of 9 years and 10 years, respectively. Expected amortization expense is $21 million for the remainder of 2021, $69 million for 2022, $59 million for 2023, $53 million for 2024, and $32 million for 2025.

Leases

The components of lease expense are presented below:


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Finance lease cost
Amortization of right-of-use assets	$	16	$	29	$	49	$	108
Interest on lease liabilities	5		6		15		17
Operating lease cost	28		27		82		75
	$	49	$	62	$	146	$	200

Short-term and variable lease expenses were not significant and are presented within operating lease costs in the table above. Sublease income was not significant for any period presented.

14 | 2021 Q3 10-Q

Other information related to our leases was as follows:


Nine months ended	June 3, 2021		May 28, 2020

Cash flows used for operating activities
Finance leases	$	16	$	18
Operating leases(1)	80		15
Cash flows used for financing activities from financing leases	61		171
Noncash acquisitions of right-of-use assets
Finance leases	164		81
Operating leases	19		32

(1) Includes $48 million of reimbursements received for tenant improvements for the nine months ended May 28, 2020.


As of	June 3, 2021			September 3, 2020

Finance lease right-of-use assets (included in property, plant, and equipment and assets held for sale)	$	541		$	426
Weighted-average remaining lease term (in years)
Finance leases	5			5
Operating leases	7			7
Weighted-average discount rate
Finance leases	3.62		%	4.51		%
Operating leases	2.64		%	2.67		%

Maturities of lease liabilities existing as of June 3, 2021 were as follows:


For the year ending	Finance Leases		Operating Leases

Remainder of 2021	$	27	$	14
2022	110		72
2023	97		68
2024	71		61
2025	56		50
2026 and thereafter	340		413
Less imputed interest	(103)		(111)
	$	598	$	567

The table above excludes any lease liabilities for leases that have been executed but have not yet commenced. As of June 3, 2021, we had such lease liabilities relating to 1) operating lease payment obligations of $147 million for the initial 10-year lease term for a building, which may, at our election, be terminated after 3 years or extended for an additional 10 years, and 2) finance lease obligations of $807 million over a weighted-average period of 15 years for leases embedded in gas supply arrangements. We will recognize right-of-use assets and associated lease liabilities at the time such assets become available for our use.

Accounts Payable and Accrued Expenses


As of	June 3, 2021		September 3, 2020

Accounts payable	$	1,640	$	2,191
Property, plant, and equipment	1,422		2,374
Salaries, wages, and benefits	873		849
Income and other taxes	220		237
Other	272		166
	$	4,427	$	5,817

Debt


	June 3, 2021										September 3, 2020
					Net Carrying Amount						Net Carrying Amount
As of	Stated Rate		Effective Rate		Current		Long-Term		Total		Current		Long-Term		Total

Finance lease obligations	N/A		3.62	%	$	144	$	454	$	598	$	76	$	410	$	486
2023 Notes	2.497	%	2.64	%	—		1,247		1,247		—		1,245		1,245
2024 Notes	4.640	%	4.76	%	—		598		598		—		598		598
2024 Term Loan A	0.975	%	1.01	%	—		1,186		1,186		—		—		—
2026 Notes	4.975	%	5.07	%	—		498		498		—		498		498
2027 Notes(1)	4.185	%	4.27	%	—		894		894		—		895		895
2029 Notes	5.327	%	5.40	%	—		696		696		—		696		696
2030 Notes	4.663	%	4.73	%	—		845		845		—		845		845
2032D Notes	3.125	%	6.33	%	152		—		152		131		—		131
MMJ Creditor Payments	N/A		N/A		1		—		1		1		—		1
Extinguished 2024 Term Loan A	N/A		N/A		—		—		—		62		1,186		1,248
					$	297	$	6,418	$	6,715	$	270	$	6,373	$	6,643

(1) On April 21, 2021, we entered into fixed-to-floating interest rate swaps on the 2027 Notes with an aggregate $900 million notional amount equal to the principal amount of the 2027 Notes. The resulting variable interest paid is at a rate equal to SOFR plus approximately 3.33%.

Revolving Credit Facility

On May 14, 2021, we terminated our existing undrawn credit facility and entered into a new five-year unsecured Revolving Credit Facility. Under the Revolving Credit Facility, we can draw up to $2.50 billion which would generally bear interest at a rate equal to LIBOR plus 1.00% to 1.75%, depending on our corporate credit ratings. Any amounts outstanding under the Revolving Credit Facility would mature in May 2026 and amounts borrowed may be prepaid without penalty. As of June 3, 2021, no amounts were outstanding under the Revolving Credit Facility and $2.50 billion was available to us.

Under the terms of the Revolving Credit Facility, we must maintain a leverage ratio, calculated as of the last day of each fiscal quarter, of total indebtedness to adjusted EBITDA not to exceed 3.25 to 1.00. The Revolving Credit Facility contains other covenants that, among other things, limit, in certain circumstances, our ability and/or the ability of our restricted subsidiaries to (1) create or incur certain liens and enter into sale and lease-back transactions, (2) create, assume, incur, or guarantee certain additional secured indebtedness and unsecured indebtedness of our restricted subsidiaries, and (3) consolidate with or merge with or into, or convey, transfer, lease, or otherwise dispose of all or substantially all of our assets, to another entity. These covenants are subject to a number of limitations, exceptions, and qualifications.

16 | 2021 Q3 10-Q

2024 Term Loans

On May 14, 2021, we drew $1.19 billion under an unsecured 2024 Term Loan A and used the proceeds to repay the $1.19 billion Extinguished 2024 Term Loan A. The 2024 Term Loan A bears interest at a rate equal to LIBOR plus 0.625% to 1.375% based on our current corporate credit ratings. The principal amount is due October 2024 and may be prepaid without penalty. The 2024 Term Loan A contains the same leverage ratio and substantially the same other covenants as the Revolving Credit Facility.

2032D Convertible Senior Notes

In the third quarter of 2021, holders of our 2032D Notes with an aggregate principal amount of $75 million converted their notes. We elected to settle notes with an aggregate principal amount of $68 million with a combination of cash for the principal amount and shares of our common stock for the remainder of the settlement amount. In the fourth quarter of 2021, we settled these conversions and issued 5.9 million shares of our stock.

For the remaining converted notes with an aggregate principal amount of $7 million, we elected to settle the conversion obligation in excess of the principal amount in cash. As a result of our election to settle all amounts due upon conversion in cash for these notes, such settlement obligations became derivative debt liabilities subject to mark-to-market accounting treatment based on the volume-weighted-average price of our common stock over a period of 20 consecutive trading days. Accordingly, at the dates of our elections to settle the conversions in cash, we reclassified the fair values of the equity components of each of the converted notes from additional capital to derivative debt liabilities within current debt in our consolidated balance sheet. Notes with a principal amount of $3 million were not settled as of the end of the third quarter of 2021 and the net carrying amount of convertible notes included $22 million for the fair values of the derivative debt liabilities.

On May 28, 2021, we notified holders of our 2032D Notes that we would redeem the remaining $59 million of principal amount of our 2032D Notes on June 29, 2021. In connection with our notice, we made an irrevocable election to settle the conversion amount with a combination of cash for the principal amount and shares of our common stock for the remainder of the settlement amount. In the fourth quarter of 2021, holders converted substantially all of the 2032D Notes.

As of June 3, 2021, based on the $82.03 trading price of our common stock and the $9.98 conversion price, the aggregate conversion value of $1.07 billion for the 2032D Notes exceeded the aggregate principal amount of $130 million by $938 million.

Contingencies

Patent Matters

As is typical in the semiconductor and other high-tech industries, from time to time, others have asserted, and may in the future assert, that our products or manufacturing processes infringe upon their intellectual property rights.

On August 12, 2014, MLC Intellectual Property, LLC filed a patent infringement action against Micron in the U.S. District Court for the Northern District of California. The complaint alleges that Micron infringes a single U.S. patent and seeks damages, attorneys’ fees, and costs.

On November 21, 2014, Elm 3DS Innovations, LLC (“Elm”) filed a patent infringement action against Micron; Micron Semiconductor Products, Inc.; and Micron Consumer Products Group, Inc. in the U.S. District Court for the District of Delaware. On March 27, 2015, Elm filed an amended complaint against the same entities. The amended complaint alleges that unspecified semiconductor products of ours that incorporate multiple stacked die infringe 13 U.S. patents and seeks damages, attorneys’ fees, and costs.

On December 15, 2014, Innovative Memory Solutions, Inc. filed a patent infringement action against Micron in the U.S. District Court for the District of Delaware. The complaint alleges that a variety of our NAND products infringe

eight U.S. patents and seeks damages, attorneys’ fees, and costs. Subsequently, six patents were invalidated or withdrawn, leaving two asserted patents in the District Court.

On March 19, 2018, Micron Semiconductor (Xi’an) Co., Ltd. (“MXA”) was served with a patent infringement complaint filed by Fujian Jinhua Integrated Circuit Co., Ltd. (“Jinhua”) in the Fuzhou Intermediate People’s Court in Fujian Province, China (the “Fuzhou Court”). On April 3, 2018, Micron Semiconductor (Shanghai) Co. Ltd. (“MSS”) was served with the same complaint. The complaint alleges that MXA and MSS infringe a Chinese patent by manufacturing and selling certain Crucial DDR4 DRAM modules. The complaint seeks an order requiring MXA and MSS to destroy inventory of the accused products and equipment for manufacturing the accused products in China; to stop manufacturing, using, selling, and offering for sale the accused products in China; and to pay damages of 98 million Chinese yuan plus court fees incurred.

On March 21, 2018, MXA was served with a patent infringement complaint filed by United Microelectronics Corporation (“UMC”) in the Fuzhou Court. On April 3, 2018, MSS was served with the same complaint. The complaint alleges that MXA and MSS infringe a Chinese patent by manufacturing and selling certain Crucial DDR4 DRAM modules. The complaint seeks an order requiring MXA and MSS to destroy inventory of the accused products and equipment for manufacturing the accused products in China; to stop manufacturing, using, selling, and offering for sale the accused products in China; and to pay damages of 90 million Chinese yuan plus court fees incurred.

On April 3, 2018, MSS was served with another patent infringement complaint filed by Jinhua and two additional complaints filed by UMC in the Fuzhou Court. The three additional complaints allege that MSS infringes three Chinese patents by manufacturing and selling certain Crucial MX300 SSDs and certain GDDR5 memory chips. The two complaints filed by UMC each seek an order requiring MSS to destroy inventory of the accused products and equipment for manufacturing the accused products in China; to stop manufacturing, using, selling, and offering for sale the accused products in China; and to pay damages for each complaint of 90 million Chinese yuan plus court fees incurred. The complaint filed by Jinhua seeks an order requiring MSS to destroy inventory of the accused products and equipment for manufacturing the accused products in China; to stop manufacturing, using, selling, and offering for sale the accused products in China; and to pay damages of 98 million Chinese yuan plus court fees incurred. On October 9, 2018, UMC withdrew its complaint that alleged MSS infringed a Chinese patent by manufacturing and selling certain GDDR5 memory chips.

On July 5, 2018, MXA and MSS were notified that the Fuzhou Court granted a preliminary injunction against those entities that enjoins them from manufacturing, selling, or importing certain Crucial and Ballistix-branded DRAM modules and solid-state drives in China. The affected products made up slightly more than 1% of our annualized revenue in 2018. We are complying with the ruling and have requested the Fuzhou Court to reconsider or stay its decision.

On May 4, 2020, Flash-Control, LLC filed a patent infringement action against Micron in the U.S. District Court for the Western District of Texas. The complaint alleges that four U.S. patents are infringed by unspecified DDR4 SDRAM, NVRDIMM, NVDIMM, 3D XPoint, and/or SSD products that incorporate memory controllers and flash memory. The complaint seeks damages, attorneys’ fees, and costs.

On April 28, 2021, Netlist, Inc. filed two patent infringement actions against Micron, Micron Semiconductor Products, Inc. and Micron Technology Texas, LLC in the U.S. District Court for the Western District of Texas. The first complaint alleges that a single U.S. patent is infringed by certain of our non-volatile dual in-line memory modules. The second complaint alleges that three U.S. patents are infringed by certain of our load-reduced dual in-line memory modules. Each complaint seeks injunctive relief, damages, attorneys’ fees, and costs.

On May 10, 2021, Vervain, LLC filed a patent infringement action against Micron, Micron Semiconductor Products, Inc., and Micron Technology Texas, LLC in the U.S. District Court for the Western District of Texas. The complaint alleges that four U.S. patents are infringed by certain SSD products. The complaint seeks injunctive relief, damages, attorneys’ fees, and costs.

Among other things, the above lawsuits pertain to substantially all of our DRAM, NAND, and other memory and storage products we manufacture, which account for substantially all of our revenue.

18 | 2021 Q3 10-Q

Qimonda

On January 20, 2011, Dr. Michael Jaffé, administrator for Qimonda’s insolvency proceedings, filed suit against Micron and Micron Semiconductor B.V. (“Micron B.V.”), in the District Court of Munich, Civil Chamber. The complaint seeks to void, under Section 133 of the German Insolvency Act, a share purchase agreement between Micron B.V. and Qimonda signed in fall 2008, pursuant to which Micron B.V. purchased substantially all of Qimonda’s shares of Inotera (the “Inotera Shares”), representing approximately 18% of Inotera’s outstanding shares at that time, and seeks an order requiring us to re-transfer those shares to the Qimonda estate. The complaint also seeks, among other things, to recover damages for the alleged value of the joint venture relationship with Inotera and to terminate, under Sections 103 or 133 of the German Insolvency Code, a patent cross-license between us and Qimonda entered into at the same time as the share purchase agreement.

Following a series of hearings with pleadings, arguments, and witnesses on behalf of the Qimonda estate, on March 13, 2014, the court issued judgments: (1) ordering Micron B.V. to pay approximately $1 million in respect of certain Inotera Shares sold in connection with the original share purchase; (2) ordering Micron B.V. to disclose certain information with respect to any Inotera Shares sold by it to third parties; (3) ordering Micron B.V. to disclose the benefits derived by it from ownership of the Inotera Shares, including in particular, any profits distributed on the Inotera Shares and all other benefits; (4) denying Qimonda’s claims against Micron for any damages relating to the joint venture relationship with Inotera; and (5) determining that Qimonda’s obligations under the patent cross-license agreement are canceled. In addition, the court issued interlocutory judgments ordering, among other things: (1) that Micron B.V. transfer to the Qimonda estate the Inotera Shares still owned by Micron B.V. and pay to the Qimonda estate compensation in an amount to be specified for any Inotera Shares sold to third parties; and (2) that Micron B.V. pay the Qimonda estate as compensation an amount to be specified for benefits derived by Micron B.V. from ownership of the Inotera Shares. The interlocutory judgments had no immediate, enforceable effect and Micron, accordingly, has been able to continue to operate with full control of the Inotera Shares subject to further developments in the case. On April 17, 2014, Micron and Micron B.V. filed a notice of appeal with the German Appeals Court challenging the District Court’s decision. After opening briefs, the Appeals Court held a hearing on the matter on July 9, 2015, and thereafter appointed an independent expert to perform an evaluation of Dr. Jaffé’s claims that the amount Micron paid for Qimonda was less than fair market value. On January 25, 2018, the court-appointed expert issued a report concluding that the amount paid by Micron was within an acceptable fair-value range. The Appeals Court held a subsequent hearing on April 30, 2019, and on May 28, 2019, the Appeals Court remanded the case to the expert for supplemental expert opinion. On March 31, 2020, the expert presented a revised opinion to the Appeals Court which reaffirmed the earlier view that the amount paid by Micron was still within an acceptable range of fair value. On March 4, 2021, the Appeals Court issued an order setting forth a new legal view that whether the 2008 sale of Inotera Shares is voidable depends on the question whether, in October 2008, Qimonda had a restructuring plan in place, and whether Micron was aware of and reasonably relied on that restructuring plan sufficient to form a belief that Qimonda was not imminently illiquid.

Antitrust Matters

On April 27, 2018, a complaint was filed against Micron and other DRAM suppliers in the U.S. District Court for the Northern District of California. Subsequently, two substantially identical cases were filed in the same court. The lawsuits purported to be on behalf of a nationwide class of indirect purchasers of DRAM products. On September 3, 2019, the District Court granted Micron’s motion to dismiss and allowed the plaintiffs the opportunity to file a consolidated, amended complaint. On October 28, 2019, the plaintiffs filed a consolidated, amended complaint that purported to be on behalf of a nationwide class of indirect purchasers of DRAM products. The amended complaint asserted claims based on alleged price-fixing of DRAM products under federal and state law during the period from June 1, 2016 to at least February 1, 2018, and sought treble monetary damages, costs, interest, attorneys’ fees, and other injunctive and equitable relief. On December 21, 2020, the District Court dismissed the plaintiffs’ claims and entered judgment against them. On January 19, 2021, the plaintiffs filed a notice of appeal to the U.S. Court of Appeals for the Ninth Circuit. On May 3, 2021, several plaintiffs filed a substantially identical complaint in the U.S. District Court for the Northern District of California purportedly on behalf of a nationwide class of indirect purchasers of DRAM products.

On June 26, 2018, a complaint was filed against Micron and other DRAM suppliers in the U.S. District Court for the Northern District of California. Subsequently, four substantially identical cases were filed in the same court. On October 28, 2019, the plaintiffs filed a consolidated, amended complaint. The consolidated complaint purported to be on behalf of a nationwide class of direct purchasers of DRAM products. The consolidated complaint asserted claims based on alleged price-fixing of DRAM products under federal and state law during the period from June 1, 2016 through at least February 1, 2018, and sought treble monetary damages, costs, interest, attorneys’ fees, and other injunctive and equitable relief. On December 21, 2020, the District Court granted Micron’s motion to dismiss and granted the plaintiffs permission to file a further amended complaint. On January 11, 2021, the plaintiffs filed a further amended complaint asserting substantially the same claims and seeking the same relief.

Additionally, six cases have been filed in the following Canadian courts: Superior Court of Quebec, the Federal Court of Canada, the Ontario Superior Court of Justice, and the Supreme Court of British Columbia. The substantive allegations in these cases are similar to those asserted in the cases filed in the United States.

On May 15, 2018, the Chinese State Administration for Market Regulation (“SAMR”) notified Micron that it was investigating potential collusion and other anticompetitive conduct by DRAM suppliers in China. On May 31, 2018, SAMR made unannounced visits to our sales offices in Beijing, Shanghai, and Shenzhen to seek certain information as part of its investigation. We are cooperating with SAMR in its investigation.

Securities Matters

On March 5, 2019, a derivative complaint was filed by a shareholder against certain current and former officers and directors of Micron, allegedly on behalf of and for the benefit of Micron, in the U.S. District Court for the District of Delaware alleging securities fraud, breaches of fiduciary duties, and other violations of law involving misrepresentations about purported anticompetitive behavior in the DRAM industry. The complaint seeks damages, fees, interest, costs, and other appropriate relief.

On February 9, 2021, a derivative complaint was filed by a shareholder against Sanjay Mehrotra and other current and former directors of Micron, allegedly on behalf of and for the benefit of Micron, in the U.S. District Court for the District of Delaware alleging violations of securities laws, breaches of fiduciary duties, and other violations of law involving allegedly false and misleading statements about Micron’s commitment to diversity and progress in diversifying its workforce, executive leadership, and Board of Directors. The complaint seeks damages, fees, interest, costs, and an order requiring Micron to take various actions to allegedly improve its corporate governance and internal procedures.

Other

On December 5, 2017, Micron filed a complaint against UMC and Jinhua in the U.S. District Court for the Northern District of California. The complaint alleges that UMC and Jinhua violated the Defend Trade Secrets Act, the civil provisions of the Racketeer Influenced and Corrupt Organizations Act, and California’s Uniform Trade Secrets Act by misappropriating Micron’s trade secrets and other misconduct. Micron’s complaint seeks damages, restitution, disgorgement of profits, injunctive relief, and other appropriate relief.

On June 13, 2019, current Micron employee, Chris Manning, filed a putative class action lawsuit on behalf of Micron employees subject to the Idaho Wage Claim Act who earned a performance-based bonus after the conclusion of 2018 whose performance rating was calculated based upon a mandatory percentage distribution range of performance ratings. On July 12, 2019, Manning and three other Company employees filed an amended complaint as putative class action representatives. On behalf of themselves and the putative class, Manning and the three other plaintiffs assert claims for violation of the Idaho Wage Claim Act, breach of contract, breach of the covenant of good faith and fair dealing, and fraud. On June 24, 2020, the court entered judgment in favor of Micron based on the statute of limitations, and the plaintiffs filed a notice of appeal on July 23, 2020.

On July 31, 2020, Micron and Intel entered into a binding arbitration agreement under which the parties agreed to present to an arbitral panel various financial disputes related to the IMFT joint venture between Micron and Intel, which ended October 31, 2019, and to other agreements relating to the joint development, production, and sale of non-volatile memory products. Each party alleges that the other owes damages relating to allegations of breach of one or more agreements.

20 | 2021 Q3 10-Q

On July 13, 2015, Allied Telesis, Inc. and Allied Telesis International (Asia) Pte Ltd. filed a complaint against Micron in the Superior Court of California in Santa Clara alleging breach of implied and express warranties and fraudulent inducement to contract arising from plaintiffs’ purchase of certain allegedly defective DDR1 products between 2008 and 2010. Through subsequent amendments to the complaint, the plaintiffs substituted Allied Telesis K.K. as plaintiff, withdrew the warranty claims, and added claims of fraudulent concealment, negligent misrepresentation, negligence, and strict products liability. The plaintiff’s amended complaint seeks an unspecified award of damages, including punitive damages and lost profits. On September 3, 2020, the Superior Court granted summary judgment dismissing the claims for negligence and strict products liability and denied summary judgment as to the claims for negligent misrepresentation, fraudulent concealment, and fraudulent inducement to contract. A trial is scheduled to begin on September 13, 2021.

In the normal course of business, we are a party to a variety of agreements pursuant to which we may be obligated to indemnify another party. It is not possible to predict the maximum potential amount of future payments under these types of agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. Historically, our payments under these types of agreements have not had a material adverse effect on our business, results of operations, or financial condition.

We are unable to predict the outcome of the patent matters, Qimonda matter, antitrust matters, securities matters, binding arbitration with Intel, or any other matters noted above, and cannot make a reasonable estimate of the potential loss or range of possible losses. A determination that our products or manufacturing processes infringe the intellectual property rights of others or entering into a license agreement covering such intellectual property could result in significant liability and/or require us to make material changes to our products and/or manufacturing processes. Any of the foregoing, as well as the resolution of any other legal matter noted above, could have a material adverse effect on our business, results of operations, or financial condition.

We are currently a party to legal actions other than those described in this note arising from the normal course of business, none of which are expected to have a material adverse effect on our business, results of operations, or financial condition.

Equity

Micron Shareholders’ Equity

Common Stock Repurchases: Our Board of Directors has authorized the discretionary repurchase of up to $10 billion of our outstanding common stock through open-market purchases, block trades, privately-negotiated transactions, derivative transactions, and/or pursuant to Rule 10b5-1 trading plans. The repurchase authorization has no expiration date, does not obligate us to acquire any common stock, and is subject to market conditions and our ongoing determination of the best use of available cash. In the third quarter and first nine months of 2021, we repurchased 1.7 million shares of our common stock for $150 million. In the third quarter and first nine months of 2020, we repurchased 0.9 million shares of our common stock for $40 million, and 2.8 million shares of our common stock for $134 million, respectively. Through June 3, 2021, we had repurchased an aggregate of $2.99 billion under the authorization. The shares were recorded as treasury stock.

Accumulated Other Comprehensive Income: Changes in accumulated other comprehensive income by component for the nine months ended June 3, 2021 were as follows:


	Gains (Losses) on Derivative Instruments		Pension Liability Adjustments		Unrealized Gains (Losses) on Investments		Cumulative Foreign Currency Translation Adjustment		Total

As of September 3, 2020	$	45	$	19	$	8	$	(1)	$	71
Other comprehensive income before reclassifications	(8)		—		(5)		1		(12)
Amount reclassified out of accumulated other comprehensive income	(30)		1		(3)		—		(32)
Tax effects	18		—		2		—		20
Other comprehensive income (loss)	(20)		1		(6)		1		(24)
As of June 3, 2021	$	25	$	20	$	2	$	—	$	47

Fair Value Measurements

The estimated fair values and carrying values of our outstanding debt instruments (excluding the carrying value of equity components of our convertible notes) were as follows:


	June 3, 2021				September 3, 2020
As of	Fair Value		Carrying Value		Fair Value		Carrying Value

Notes	$	6,545	$	5,965	$	6,710	$	6,026
Convertible notes	1,097		152		634		131

The fair values of our convertible notes were determined based on Level 2 inputs, including the trading price of our convertible notes when available, our stock price, and interest rates based on similar debt issued by parties with credit ratings similar to ours. The fair values of our other debt instruments were estimated based on Level 2 inputs, including discounted cash flows, the trading price of our notes when available, and interest rates based on similar debt issued by parties with credit ratings similar to ours.

Assets classified as held for sale are carried at the lower of fair value less cost to sell or carrying value. Significant judgments and assumptions are required to estimate their fair values. Actual selling prices could vary significantly from our estimated fair value and we could recognize additional losses in the event that the sales prices of assets classified as held for sale are lower than their carrying values.

22 | 2021 Q3 10-Q

Derivative Instruments


	Notional or Contractual Amount		Fair Value of
			Assets(1)		Liabilities(2)

As of June 3, 2021
Derivative instruments with hedge accounting designation
Cash flow currency hedges	$	3,842	$	30	$	(65)
Cash flow commodity hedges	41		3		—
Fair value interest rate hedges	900		—		(2)

Derivative instruments without hedge accounting designation
Non-designated currency hedges	877		1		(1)
Convertible notes settlement obligation	3		—		(25)
			$	34	$	(93)

As of September 3, 2020
Derivative instruments with hedge accounting designation
Cash flow currency hedges	$	1,845	$	41	$	(2)

Derivative instruments without hedge accounting designation
Non-designated currency hedges	1,587		4		(1)
			$	45	$	(3)

(1)Included in receivables – other and other noncurrent assets.

(2)Included in accounts payable and accrued expenses – other and other noncurrent liabilities.

Derivative Instruments with Hedge Accounting Designation

Cash Flow Hedges: We utilize forward and swap contracts that generally mature within two years designated as cash flow hedges for our exposure to changes in currency exchange rates or commodity prices for certain capital expenditures and manufacturing costs. Forward and swap contracts are measured at fair value based on market-based observable inputs including market spot and forward rates, interest rates, and credit-risk spreads (Level 2). We do not use derivative instruments for speculative purposes. We recognized losses of $25 million and $8 million for the third quarter and first nine months of 2021, respectively, and losses of $6 million and $20 million for the third quarter and first nine months of 2020, respectively, in accumulated other comprehensive income from cash flow hedges. We recognized losses of $11 million and $10 million for the first nine months of 2021 and 2020, respectively, in cost of goods sold related to the amounts excluded from hedge effectiveness testing. The amounts for the third quarters of 2021 and 2020 were not significant. We reclassified $20 million and $30 million of gains for the third quarter and first nine months of 2021, respectively, from accumulated other comprehensive income to earnings, primarily to cost of goods sold. The amounts for the third quarter and first nine months of 2020 were not significant. As of June 3, 2021, we expect to reclassify $18 million of pre-tax gains related to cash flow hedges from accumulated other comprehensive income into earnings in the next 12 months. Substantially all of the cash flow hedging relates to foreign currency contracts for all periods presented, the commodity hedges had an immaterial impact.

Fair Value Hedges: We utilize fixed-to-floating interest rate swaps designated as fair value hedges to minimize certain exposures to changes in the fair value of fixed-rate debt that result from fluctuations in benchmark interest rates. Interest rate swaps are measured at fair value based on market-based observable inputs including interest rates and credit-risk spreads (Level 2). The changes in the fair values of derivatives designated as fair value hedges and the offsetting changes in the fair values of the hedged items are recognized in earnings. Any difference is reflected in earnings. When a derivative is no longer designated as a fair value hedge for any reason, including termination and maturity, the remaining unamortized difference between the carrying value of the hedged item at that time and the face value of the hedged item is amortized to earnings over the remaining life of the hedged item, or immediately if the hedged item has matured or been extinguished. The effects of fair value hedges on our

consolidated statements of operations, recognized in interest expense, were not significant for the periods presented.

Derivative Instruments without Hedge Accounting Designation

Currency Derivatives: We generally utilize a rolling hedge strategy with currency forward contracts that mature within three months to hedge our exposures of monetary assets and liabilities from changes in currency exchange rates. At the end of each reporting period, monetary assets and liabilities denominated in currencies other than the U.S. dollar are remeasured into U.S. dollars and the associated outstanding forward contracts are marked to market. Currency forward contracts are valued at fair values based on the middle of bid and ask prices of dealers or exchange quotations (Level 2). Realized and unrealized gains and losses on derivative instruments without hedge accounting designation as well as the changes in the underlying monetary assets and liabilities from changes in currency exchange rates are included in other non-operating income (expense), net. Gains and losses for derivative instruments without hedge accounting designation were not significant for the periods presented.

Equity Plans

As of June 3, 2021, 105 million shares of our common stock were available for future awards under our equity plans.

Restricted Stock and Restricted Stock Units (“Restricted Stock Awards”)

Restricted Stock Awards activity is summarized as follows:


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Restricted stock award shares granted	1		—		11		8
Weighted-average grant-date fair value per share	$	84.73	$	45.78	$	53.00	$	46.37

Employee Stock Purchase Plan (“ESPP”)

ESPP activity is summarized as follows:


Nine months ended	June 3, 2021		May 28, 2020

Shares purchased	2		2
Purchase price per share	$	42.55	$	38.16

Stock-based Compensation Expense

Stock based compensation expense recognized in our statements of operations is presented below. Stock-based compensation expense of $31 million and $42 million was capitalized and remained in inventory as of June 3, 2021 and September 3, 2020, respectively.

24 | 2021 Q3 10-Q


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Stock-based compensation expense by caption
Cost of goods sold	$	45	$	34	$	143	$	102
Research and development	29		22		82		63
Selling, general, and administrative	24		26		77		74
	$	98	$	82	$	302	$	239

Stock-based compensation expense by type of award
Restricted stock awards	$	84	$	70	$	255	$	197
Employee stock purchase plan	12		9		39		28
Stock options	2		3		8		14
	$	98	$	82	$	302	$	239

As of June 3, 2021, $754 million of total unrecognized compensation costs for unvested awards, before the effect of any future forfeitures, was expected to be recognized through the third quarter of 2025, resulting in a weighted-average period of 1.3 years.

Revenue and Customer Contract Liabilities

Revenue by Technology


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

DRAM	$	5,448	$	3,587	$	13,948	$	10,139
NAND	1,812		1,665		5,036		4,601
Other (primarily 3D XPoint memory and NOR)	162		186		447		639
	$	7,422	$	5,438	$	19,431	$	15,379

See “Segment and Other Information” for disclosure of disaggregated revenue by market segments.

Contract Liabilities

Our contract liabilities from customer advances are for advance payments received from customers to secure product in future periods. Other contract liabilities consist of amounts received in advance of satisfying performance obligations. These balances are reported within other current liabilities and other noncurrent liabilities. The following table presents contract liabilities:


As of	June 3, 2021		September 3, 2020

Contract liabilities from customer advances	$	73	$	40
Other contract liabilities	20		25
	$	93	$	65

Revenue recognized during the first nine months of 2021 from the ending balance of 2020 included $43 million from meeting performance obligations of other contract liabilities and shipments against customer advances.

Revenue is primarily recognized at a point in time when control of the promised goods is transferred to our customers in an amount that reflects the consideration we expect to be entitled to in exchange for those goods. Substantially all contracts with our customers are short-term in duration at fixed, negotiated prices with payment

generally due shortly after delivery. From time to time, we have contracts with initial terms that include performance obligations that extend, in some cases, beyond one year. As of June 3, 2021, we expect future revenue related to these longer-term contracts of approximately $229 million, of which approximately 91% relates to performance obligations and product shipments we expect to satisfy within the next 12 months and 9% beyond 12 months.

As of June 3, 2021 and September 3, 2020, other current liabilities included $635 million and $466 million, respectively, for estimates of consideration payable to customers, including estimates for pricing adjustments and returns.

Other Operating (Income) Expense, Net


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Patent license charges	$	—	$	—	$	128	$	—
Other	(26)		6		(27)		8
	$	(26)	$	6	$	101	$	8

Other Non-Operating Income (Expense), Net


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Gain (loss) on investments	$	45	$	14	$	61	$	18
Gain (loss) on debt prepayments, repurchases, and conversions	—		(2)		—		40
Other	—		(2)		1		(3)
	$	45	$	10	$	62	$	55

Income Taxes

Our income tax (provision) benefit consisted of the following:


	Quarter ended						Nine months ended
	June 3, 2021			May 28, 2020			June 3, 2021			May 28, 2020

Income before taxes	$	1,806		$	870		$	3,282		$	1,858
Income tax (provision) benefit	(65)			(68)			(164)			(144)
Effective tax rate	3.6		%	7.8		%	5.0		%	7.8		%

In the third quarter of 2021, we recorded a $104 million tax benefit on the discrete $435 million charge to adjust our Lehi assets held for sale to their estimated net realizable value.

We operate in a number of jurisdictions outside the United States, including Singapore, where we have tax incentive arrangements. These incentives expire, in whole or in part, at various dates through 2034 and are conditional, in part, upon meeting certain business operations and employment thresholds. The effect of tax incentive arrangements reduced our tax provision by $276 million (benefiting our diluted earnings per share by $0.24) and $377 million ($0.33 per diluted share) for the third quarter and first nine months of 2021, respectively, and by $70 million ($0.06 per diluted share) and $78 million ($0.07 per diluted share) for the third quarter and first nine months of 2020, respectively.

26 | 2021 Q3 10-Q

As of June 3, 2021, gross unrecognized tax benefits were $632 million, substantially all of which would affect our effective tax rate in the future, if recognized. Increases to unrecognized tax benefits were primarily due to tax return positions taken during 2021. Amounts accrued for interest and penalties related to uncertain tax positions were not significant for any period presented. We are currently under audit by the Internal Revenue Service for our 2018 and 2019 tax years. We believe that adequate amounts of taxes and related interest and penalties have been provided.

Earnings Per Share


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Net income attributable to Micron – Basic	$	1,735	$	803	$	3,141	$	1,699
Assumed conversion of debt	—		—		—		(4)
Net income attributable to Micron – Diluted	$	1,735	$	803	$	3,141	$	1,695

Weighted-average common shares outstanding – Basic	1,121		1,111		1,119		1,110
Dilutive effect of equity plans and convertible notes	24		18		22		21
Weighted-average common shares outstanding – Diluted	1,145		1,129		1,141		1,131

Earnings per share
Basic	$	1.55	$	0.72	$	2.81	$	1.53
Diluted	1.52		0.71		2.75		1.50

Antidilutive potential common stock shares that could dilute basic earnings per share in the future were 1 million for the third quarter and first nine months of 2021, and were 9 million and 5 million for the third quarter and first nine months of 2020, respectively.

Segment and Other Information

Segment information reported herein is consistent with how it is reviewed and evaluated by our chief operating decision maker. We have the following four business units, which are our reportable segments:

Compute and Networking Business Unit (“CNBU”): Includes memory products sold into client, cloud server, enterprise, graphics, and networking markets.

Mobile Business Unit (“MBU”): Includes memory and storage products sold into smartphone and other mobile-device markets.

Storage Business Unit (“SBU”): Includes SSDs and component-level solutions sold into enterprise and cloud, client, and consumer storage markets, and other discrete storage products sold in component and wafer form.

Embedded Business Unit (“EBU”): Includes memory and storage products sold into automotive, industrial, and consumer markets.

Certain operating expenses directly associated with the activities of a specific segment are charged to that segment. Other indirect operating income and expenses are generally allocated to segments based on their respective percentage of cost of goods sold or forecasted wafer production. We do not identify or report internally our assets (other than goodwill) or capital expenditures by segment, nor do we allocate gains and losses from equity method investments, interest, other non-operating income or expense items, or taxes to segments.


	Quarter ended				Nine months ended
	June 3, 2021		May 28, 2020		June 3, 2021		May 28, 2020

Revenue
CNBU	$	3,304	$	2,218	$	8,486	$	6,164
MBU	1,999		1,525		5,311		4,240
SBU	1,009		1,014		2,770		2,852
EBU	1,105		675		2,849		2,105
All Other	5		6		15		18
	$	7,422	$	5,438	$	19,431	$	15,379

Operating income (loss)
CNBU	$	1,342	$	448	$	2,534	$	1,132
MBU	683		295		1,517		773
SBU	53		177		(2)		(42)
EBU	282		64		539		256
All Other	4		(3)		6		(2)
	2,364		981		4,594		2,117

Unallocated
Inventory accounting policy change to FIFO	—		—		(133)		—
Change in inventory cost absorption	—		—		(160)		—
3D XPoint inventory write-down	—		—		(49)		—
Stock-based compensation	(98)		(82)		(302)		(239)
Patent license charges	—		—		(128)		—
Restructure and asset impairments	(453)		(4)		(466)		(10)
Other	(14)		(7)		(28)		(22)
	(565)		(93)		(1,266)		(271)

Operating income	$	1,799	$	888	$	3,328	$	1,846

Certain Concentrations

Revenue from WPG Holdings Limited was 13% of total revenue for the first nine months of 2021.

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This discussion should be read in conjunction with the consolidated financial statements and accompanying notes included in our Annual report on Form 10-K for the year ended September 3, 2020. All period references are to our fiscal periods unless otherwise indicated. Our fiscal year is the 52 or 53-week period ending on the Thursday closest to August 31. Fiscal 2021 contains 52 weeks and our fiscal 2020 contained 53 weeks. Our third quarters and first nine months of 2020 and 2021 each contained 13 and 39 weeks, respectively. All tabular dollar amounts are in millions, except per share amounts.

Overview

28 | 2021 Q3 10-Q

customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience.

We manufacture our products at wholly-owned facilities and also utilize subcontractors to perform certain manufacturing processes. In recent years, we have increased our manufacturing scale and product diversity through strategic acquisitions, expansion, and various partnering arrangements.

We make significant investments to develop proprietary product and process technology, which are implemented in our manufacturing facilities. Advancements in product and process technology, such as our leading-edge process technology and 3D NAND architecture, generally increase the density per wafer and reduce manufacturing costs of each generation of product. We continue to introduce new generations of products that offer improved performance characteristics, including higher data transfer rates, advanced packaging solutions, lower power consumption, improved read/write reliability, and increased memory density. A significant portion of our revenues are from sales of managed NAND and SSD products, which incorporate NAND, a controller, firmware, and in some cases, DRAM. An increasing portion of our SSDs incorporate proprietary controllers and firmware that we have developed. Development of advanced technologies enables us to diversify our product portfolio toward a richer mix of differentiated, high-value solutions and to target high-growth markets.

We face intense competition in the semiconductor memory and storage markets and to remain competitive we must continuously develop and implement new products and technologies and decrease manufacturing costs. Our success is largely dependent on obtaining returns on our research and development (“R&D”) investments, efficient utilization of our manufacturing infrastructure, development and integration of advanced product and process technologies, market acceptance of our diversified portfolio of semiconductor-based memory and storage solutions, and return-driven capital spending.

Lehi, Utah Fab and 3D XPoint

In the second quarter of 2021, we updated our portfolio strategy to further strengthen our focus on memory and storage innovations for the data center market. In connection therewith, we determined that there was insufficient market validation to justify the ongoing investments required to commercialize 3D XPoint at scale. Accordingly, we ceased development of 3D XPoint technology and engaged in discussions with potential buyers for the sale of our facility located in Lehi that was dedicated to 3D XPoint production. As a result, we classified the property, plant, and equipment as held for sale and ceased depreciating the assets. On June 30, 2021, we announced that we have entered into a definitive agreement to sell our Lehi facility to TI for cash consideration of $900 million. The sale is anticipated to close later this calendar year.

In the third quarter of 2021, we recognized a charge of $435 million included in restructure and asset impairments (and a tax benefit of $104 million included in income tax (provision) benefit) to write down the assets held for sale to the expected consideration, net of estimated selling costs, to be realized from the sale of these assets and liabilities. In the second quarter of 2021, we also recognized a charge of $49 million to cost of goods sold to write down 3D XPoint inventory due to our decision to cease further development of this technology. Our 3D XPoint technology development and Lehi facility operations are primarily included in our CNBU business unit.

Assets classified as held for sale are carried at the lower of fair value less cost to sell or carrying value. We could recognize additional losses as a result of changes in the assets and liabilities prior to the closing date of the transaction.

Impact of COVID-19 on Our Business

Events surrounding the ongoing COVID-19 pandemic initially resulted in a reduction in economic activity across the globe, and the timing and extent of the ongoing economic recovery remains uncertain. As a result, we have experienced volatility in the markets that our products are sold into, driven by the move to a stay-at-home economy and fluctuations in consumer and business spending, which has affected demand for certain of our products. The ultimate extent to which COVID-19 will impact our business depends on future developments, which are highly uncertain and very difficult to predict, including the effectiveness and utilization of vaccines for COVID-19 and its

variants, new information that may emerge concerning the severity of COVID-19 and its variants, and actions to contain or limit their spread.

From the start of the COVID-19 pandemic, we proactively implemented preventative protocols, which we continuously assess and update for changes in conditions and emerging trends, such as recent increases in COVID-19 infections in Malaysia, India, and Taiwan, where we have facilities and a significant number of employees, and increasing levels of vaccinations in the United States and other countries. These preventative protocols are intended to safeguard our team members, contractors, suppliers, customers, distributors, and communities, and to ensure business continuity in the event government restrictions or severe outbreaks impact our operations at certain sites. While nearly all our global manufacturing sites are currently operating with close to full staff and at normal capacity levels, our Muar, Malaysia facility has recently been operating at reduced staffing and capacity levels. In addition, we have experienced constraints on our engineering and other activities at our India facilities. Our other facilities could also be required to temporarily curtail production levels or temporarily cease operations based on government mandates or our health and safety protocols. We may be required, or deem it to be in the best interest of our employees, customers, partners, suppliers, and stakeholders, to alter our business operations in order to maintain a healthy and safe environment. It is not clear what potential effects any such alterations or modifications may have on our business, including effects on our customers, employees, and prospects, or on our financial results. We are following government policies and recommendations designed to slow the spread of COVID-19 and remain committed to the health and safety of our team members, contractors, suppliers, customers, distributors, and communities.

We continuously assess our efforts to respond to the COVID-19 pandemic, which have included the following:

•In locations experiencing continued community COVID-19 infections, we prohibit onsite visitors and are generally requiring team members to work from home where possible. Where work from home is not possible, all on-site team members must complete health questionnaires, pass through thermal scanning equipment to ensure they do not have an elevated body temperature, and adhere to physical distancing requirements, mask protocols, and team member separation protocols. We have also enhanced our contact tracing, significantly decreased business travel, and where possible, made ventilation and other health and safety enhancements at our facilities and provided COVID-19 testing and vaccinations for our team members.

•To respond to changing market conditions, we continue to work closely with our customer base to best match our supply with the evolving market demand.

•We evaluate our supply chain and communicate with our suppliers to identify supply gaps and have taken steps to ensure continuity. In some cases, we have added alternative suppliers and increased our on-hand inventory of raw materials needed in our operations.

•We have added assembly and test capacity to provide redundant manufacturing capability through our network of captive operations and external partners.

•We have evaluated all our construction projects across our global manufacturing operations and enacted protocols to enhance the safety of our team members, suppliers, and contractors.

•We have developed strategies and implemented measures to respond to a variety of potential economic scenarios, such as limitations on new hiring and business travel and reductions of discretionary spending.

•We are working with government authorities in the jurisdictions where we operate, and continuing to monitor our operations in an effort to ensure we follow government requirements, relevant regulations, industry standards, and best practices to help safeguard our team members, while safely continuing operations at our sites across the globe.

We believe these actions are appropriate and prudent to safeguard our team members, contractors, suppliers, customers, and communities, while allowing us to safely continue operations. We cannot predict how the steps we, our team members, government entities, suppliers, or customers take in response to the COVID-19 pandemic will ultimately impact our business, outlook, or results of operations.

Product Technologies

Our product portfolio of memory and storage solutions, advanced solutions, and storage platforms is based on our high-performance semiconductor memory and storage technologies, including DRAM, NAND, NOR, and other technologies. We sell our products into various markets through our business units in numerous forms, including wafers, components, modules, SSDs, managed NAND, and MCP products. Our system-level solutions, including

30 | 2021 Q3 10-Q

SSDs, managed NAND, and MCPs, typically include a controller and firmware and in some cases combine DRAM, NAND, and/or NOR.

DRAM: DRAM products are dynamic random access memory semiconductor devices with low latency that provide high-speed data retrieval with a variety of performance characteristics. DRAM products lose content when power is turned off (“volatile”) and are most commonly used in client, cloud server, enterprise, networking, graphics, industrial, and automotive markets. Low-power DRAM (“LPDRAM”) products, which are engineered to meet standards for performance and power consumption, are sold into smartphone and other mobile-device markets (including client markets for Chromebooks and notebook PCs), as well as into the automotive, industrial, and consumer markets.

NAND: NAND products are non-volatile, re-writeable semiconductor storage devices that provide high-capacity, low-cost storage with a variety of performance characteristics. NAND is used in SSDs for the enterprise and cloud, client, and consumer markets and in removable storage markets. Managed NAND is used in smartphones and other mobile devices, and in consumer, automotive, and embedded markets. Low-density NAND is ideal for applications like automotive, surveillance, machine-to-machine, automation, printer, and home networking.

NOR: NOR products are non-volatile re-writable semiconductor memory devices that provide fast read speeds. NOR is most commonly used for reliable code storage (e.g., boot, application, operating system, and execute-in-place code in an embedded system) and for frequently changing small data storage and is ideal for automotive, industrial, networking, and consumer applications.

3D XPoint: 3D XPoint is a class of non-volatile technology between DRAM and NAND in the memory and storage hierarchy. We have ceased development of our 3D XPoint technology and products.

Results of Operations

Consolidated Results


	Third Quarter			Second Quarter			Third Quarter			Nine Months
	2021			2021			2020			2021			2020

Revenue	$	7,422	100%	$	6,236	100%	$	5,438	100%	$	19,431	100%	$	15,379	100%
Cost of goods sold	4,296		58%	4,587		74%	3,675		68%	12,920		66%	10,895		71%
Gross margin	3,126		42%	1,649		26%	1,763		32%	6,511		34%	4,484		29%

Research and development	670		9%	641		10%	649		12%	1,958		10%	1,970		13%
Selling, general, and administrative	230		3%	214		3%	216		4%	658		3%	650		4%
Restructure and asset impairments	453		6%	5		—%	4		—%	466		2%	10		—%
Other operating (income) expense, net	(26)		—%	126		2%	6		—%	101		1%	8		—%
Operating income	1,799		24%	663		11%	888		16%	3,328		17%	1,846		12%

Interest income (expense), net	(38)		(1)%	(32)		(1)%	(28)		(1)%	(108)		(1)%	(43)		—%
Other non-operating income (expense), net	45		1%	4		—%	10		—%	62		—%	55		—%
Income tax (provision) benefit	(65)		(1)%	(48)		(1)%	(68)		(1)%	(164)		(1)%	(144)		(1)%
Equity in net income (loss) of equity method investees	(6)		—%	16		—%	3		—%	23		—%	6		—%
Net income attributable to noncontrolling interests	—		—%	—		—%	(2)		—%	—		—%	(21)		—%
Net income attributable to Micron	$	1,735	23%	$	603	10%	$	803	15%	$	3,141	16%	$	1,699	11%

Total Revenue: Total revenue for the third quarter of 2021 increased 19% as compared to the second quarter of 2021 primarily due to increases in sales of DRAM and NAND products. Sales of DRAM products for the third quarter of 2021 increased 23% as compared to the second quarter of 2021 primarily due to an approximate 20% increase in average selling prices and a low-single-digit percent increase in bit shipments driven by strong demand across key markets. Sales of NAND products for the third quarter of 2021 increased 10% as compared to the second quarter of 2021 primarily due to a high-single-digit percent increase in average selling prices and a low-single-digit percent increase in bit shipments driven by SSDs and mobile MCPs.

Total revenue for the third quarter and first nine months of 2021 increased 36% and 26%, respectively, as compared to the corresponding periods of 2020 primarily due to increases in DRAM and NAND sales. Sales of DRAM products for the third quarter of 2021 increased 52% as compared to the third quarter of 2020 primarily due to growth in bit shipments in the high-30% range and increases in average selling prices in the low-double-digit percent range, driven by client, mobile, server, and graphics markets. Sales of DRAM products for the first nine months of 2021 increased 38% as compared to the first nine months of 2020 primarily due to growth in bit shipments in the mid-30% range. Sales of NAND products for the third quarter of 2021 increased 9% as compared to the third quarter of 2020 primarily due to increases in bit shipments in the low-30% range driven by consumer and mobile markets, partially offset by an upper-teens percent range decline in average selling prices. Sales of NAND products for the first nine months of 2021 increased 9% as compared to the first nine months of 2020 primarily due to increases in bit shipments in the high-20% range, partially offset by a mid-10% range decline in average selling prices.

Overall Gross Margin: Our overall gross margin percentage increased to 42% for the third quarter of 2021 from 26% for the second quarter of 2021, primarily due to higher average selling prices for both DRAM and NAND; one-time impacts of changes in our inventory costing method to FIFO and cost absorption processes in the second quarter of 2021 (as detailed below); and lower Lehi facility and 3D XPoint costs. Our gross margins included the impact of underutilization costs at our Lehi facility of $54 million for the third quarter of 2021, $111 million for the second quarter of 2021, and $155 million for the third quarter of 2020. In the second quarter of 2021, we ceased development of 3D XPoint technology and engaged in discussions with potential buyers for the sale of our Lehi facility that was dedicated to 3D XPoint production. As a result, we classified the property, plant, and equipment as held for sale and ceased depreciating the assets, which reduced our costs by approximately $75 million in the third quarter of 2021. In the second quarter of 2021, we also recognized a charge of $49 million to cost of goods sold to write down 3D XPoint inventory. On June 30, 2021, we announced that we have entered into a definitive agreement to sell our Lehi facility to TI. The sale is anticipated to close later this calendar year. When the sale of the Lehi facility is completed our underutilization costs from the facility will be entirely eliminated.

Our overall gross margin percentage increased to 42% for the third quarter of 2021 from 32% for the third quarter of 2020 primarily due to higher DRAM margins resulting from increases in average selling prices and manufacturing cost reductions, which were partially offset by lower NAND margins as declines in average selling prices outpaced manufacturing cost reductions. Our overall gross margin percentage increased to 34% for the first nine months of 2021 from 29% for the first nine months of 2020 primarily due to higher DRAM margins resulting from manufacturing cost reductions and increases in average selling prices, which were partially offset by lower NAND margins as declines in average selling prices outpaced cost reductions. We reduced manufacturing costs for both DRAM and NAND for the third quarter and first nine months of 2021 as compared to the corresponding periods of 2020 through strong execution in delivering products featuring advanced technologies and from continuous improvement initiatives to reduce production costs.

Effective as of the beginning of the second quarter of 2021, we changed our method of inventory costing from average cost to FIFO. Concurrently, as of the beginning of the second quarter of 2021, we modified our inventory cost absorption processes used to estimate inventory values, which affects the timing of when costs are recognized. These changes resulted in a one-time increase to cost of goods sold of approximately $293 million in the second quarter of 2021.

32 | 2021 Q3 10-Q

Revenue by Business Unit


	Third Quarter			Second Quarter			Third Quarter			Nine Months
	2021			2021			2020			2021			2020

CNBU	$	3,304	45%	$	2,636	42%	$	2,218	41%	$	8,486	44%	$	6,164	40%
MBU	1,999		27%	1,811		29%	1,525		28%	5,311		27%	4,240		28%
SBU	1,009		14%	850		14%	1,014		19%	2,770		14%	2,852		19%
EBU	1,105		15%	935		15%	675		12%	2,849		15%	2,105		14%
All Other	5		—%	4		—%	6		—%	15		—%	18		—%
	$	7,422		$	6,236		$	5,438		$	19,431		$	15,379

Percentages of total revenue may not total 100% due to rounding.

Changes in revenue for each business unit for the third quarter of 2021 as compared to the second quarter of 2021 were as follows:

•CNBU revenue increased 25% primarily due to broad-based increases in average selling prices.

•MBU revenue increased 10% primarily due to increases in average selling prices driven by demand growth, particularly for MCP products in smartphone markets as 5G momentum increases.

•SBU revenue increased 19% primarily due to bit shipment increases of QLC and other SSD products and increases in average selling prices.

•EBU revenue increased 18% primarily due to strength in the industrial market and increases in average selling prices.

Changes in revenue for each business unit for the third quarter and first nine months of 2021 as compared to the corresponding periods of 2020 were as follows:

•CNBU revenue increased 49% and 38%, respectively, primarily due to broad-based increases in bit shipments across markets and higher average selling prices.

•MBU revenue increased 31% and 25%, respectively, primarily due to increases in bit shipments for high-value mobile MCP products and for the third quarter of 2021, increases in DRAM average selling prices.

•SBU revenue was relatively unchanged as increases in bit shipments for NAND products were offset by declines in average selling prices.

•EBU revenue increased 64% and 35%, respectively, primarily due to increases in bit shipments driven by strong demand growth in automotive and industrial markets.

Operating Income (Loss) by Business Unit


	Third Quarter			Second Quarter			Third Quarter			Nine Months
	2021			2021			2020			2021			2020

CNBU	$	1,342	41%	$	709	27%	$	448	20%	$	2,534	30%	$	1,132	18%
MBU	683		34%	464		26%	295		19%	1,517		29%	773		18%
SBU	53		5%	(59)		(7)%	177		17%	(2)		—%	(42)		(1)%
EBU	282		26%	141		15%	64		9%	539		19%	256		12%
All Other	4		80%	2		50%	(3)		(50)%	6		40%	(2)		(11)%
	$	2,364		$	1,257		$	981		$	4,594		$	2,117

Percentages reflect operating income (loss) as a percentage of revenue for each business unit.

Changes in operating income or loss for each business unit for the third quarter of 2021 as compared to the second quarter of 2021 were as follows:

•CNBU operating income increased primarily due to increases in DRAM average selling prices.

•MBU operating income increased primarily due to increases in average selling prices.

•SBU operating margin improved primarily due to increases in NAND average selling prices, cost reductions, and increases in bit shipments.

•EBU operating income increased primarily due to increases in average selling prices and DRAM bit shipments.

Changes in operating income or loss for each business unit for the third quarter and first nine months of 2021 as compared to the corresponding periods of 2020 were as follows:

•CNBU operating income increased primarily due to increases in bit shipments, higher average selling prices, and manufacturing cost reductions.

•MBU operating income increased primarily due to increases in sales of high-value MCP products, manufacturing cost reductions for low-power DRAM, and increases in DRAM bit shipments.

•SBU operating margin for the third quarter of 2021 declined from the third quarter of 2020 primarily due to decreases in selling prices, partially offset by manufacturing cost reductions, and increases in bit shipments. SBU operating margin for the first nine months of 2021 improved from the first nine months of 2020 primarily due to lower manufacturing costs and increases in bit shipments, partially offset by decreases in selling prices.

•EBU operating income increased primarily due to higher bit shipments and reductions in manufacturing costs.

Operating Expenses and Other

Research and Development: R&D expenses vary primarily with the number of development and pre-qualification wafers processed, the cost of advanced equipment dedicated to new product and process development, and personnel costs. Because of the lead times necessary to manufacture our products, we typically begin to process wafers before completion of performance and reliability testing. Development of a product is deemed complete when it is qualified through reviews and tests for performance and reliability. R&D expenses can vary significantly depending on the timing of product qualification.

R&D expenses for the third quarter of 2021 were 5% higher as compared to the second quarter of 2021 primarily due to increases in volumes of development and pre-qualification wafers and employee compensation. R&D expenses for the third quarter and first nine months of 2021 were relatively unchanged as compared to the corresponding periods of 2020.

Selling, General, and Administrative: SG&A expenses for the third quarter of 2021 were 7% higher as compared to the second quarter of 2021 and 6% higher as compared to the third quarter of 2020 primarily due to increases in employee compensation, legal fees, and advertising. SG&A expenses for the first nine months of 2021 were relatively unchanged as compared to the corresponding period of 2020.

Income Taxes: Our income tax (provision) benefit consisted of the following:


	Third Quarter			Second Quarter			Third Quarter			Nine Months
	2021			2021			2020			2021			2020

Income before taxes	$	1,806		$	635		$	870		$	3,282		$	1,858
Income tax (provision) benefit	(65)			(48)			(68)			(164)			(144)
Effective tax rate	3.6		%	7.6		%	7.8		%	5.0		%	7.8		%

Our effective tax rate for the third quarter and first nine months of 2021 decreased as compared to the periods presented as a result of a $104 million tax benefit on the discrete $435 million charge to adjust our Lehi assets held for sale to their estimated net realizable value. Other changes to our effective tax rate in the periods presented were primarily due to the geographic mix of our earnings.

We operate in a number of jurisdictions outside the United States, including Singapore, where we have tax incentive arrangements. These incentives expire, in whole or in part, at various dates through 2034 and are conditional, in part, upon meeting certain business operations and employment thresholds. The effect of tax incentive arrangements reduced our tax provision by $276 million (benefiting our diluted earnings per share by $0.24) for the third quarter of 2021, $45 million ($0.04 per diluted share) for the second quarter of 2021, $377 million ($0.33 per

34 | 2021 Q3 10-Q

diluted share) for the first nine months of 2021, $70 million ($0.06 per diluted share) for the third quarter of 2020, and $78 million ($0.07 per diluted share) for the first nine months of 2020.

Other: Interest expense for the third quarter of 2021 increased 10% as compared to the second quarter of 2021 primarily due to a decrease in capitalized interest from lower levels of capital projects in process. Interest income for the third quarter of 2021 was relatively unchanged as compared to the second quarter of 2021.

Interest expense for the third quarter and first nine months of 2021 decreased 10% and 6%, respectively, as compared to the corresponding periods of 2020 primarily due to a decrease in interest rates, partially offset by an increase in debt obligations. Interest income for the third quarter and first nine months of 2021 decreased 65% and 72%, respectively, as compared to the corresponding periods of 2020 as a result of decreases in interest rates, partially offset by higher cash and investment balances.

Further discussion of other operating and non-operating income and expenses can be found in “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Equity Plans,” “– Other Operating (Income) Expense, Net” and “– Other Non-Operating Income (Expense), Net.”

Liquidity and Capital Resources

Our primary sources of liquidity are cash generated from operations and financing obtained from capital markets and financial institutions. Cash generated from operations is highly dependent on selling prices for our products, which can vary significantly from period to period. We are continuously evaluating alternatives for efficiently funding our capital expenditures and ongoing operations. We expect, from time to time, to engage in a variety of financing transactions for such purposes, including the issuance of securities. As of June 3, 2021, $2.50 billion was available to draw under our Revolving Credit Facility. We expect that our cash and investments, cash flows from operations, and available financing will be sufficient to meet our requirements at least through the next 12 months and thereafter for the foreseeable future.

To develop new product and process technology, support future growth, achieve operating efficiencies, and maintain product quality, we must continue to invest in manufacturing technologies, facilities and equipment, and R&D. We estimate capital expenditures in 2021 for property, plant, and equipment, net of partner contributions, to be somewhat above $9.5 billion, focused on technology transitions and product enablement. Actual amounts for 2021 will vary depending on market conditions. As of June 3, 2021, we had purchase obligations of approximately $2.02 billion for the acquisition of property, plant, and equipment, of which approximately $1.86 billion is expected to be paid within one year.

In May 2018, our Board of Directors authorized the discretionary repurchase of up to $10 billion of our outstanding common stock through open-market purchases, block trades, privately-negotiated transactions, derivative transactions, and/or pursuant to a Rule 10b5-1 trading plan. The repurchase authorization has no expiration date, does not obligate us to acquire any common stock, and is subject to market conditions and our ongoing determination of the best use of available cash. Since the authorization in May 2018, through June 3, 2021, we had repurchased an aggregate of $2.99 billion of the authorized amount. See “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Equity.”

Cash and marketable investments totaled $9.75 billion as of June 3, 2021 and $9.19 billion as of September 3, 2020. Our investments consist primarily of bank deposits, money market funds, and liquid investment-grade, fixed-income securities, which are diversified among industries and individual issuers. To mitigate credit risk, we invest through high-credit-quality financial institutions and by policy generally limit the concentration of credit exposure by restricting the amount of investments with any single obligor. As of June 3, 2021, $3.38 billion of our cash and marketable investments was held by our foreign subsidiaries.

Cash Flows:


	Nine Months
	2021		2020

Net cash provided by operating activities	$	8,584	$	6,035
Net cash provided by (used for) investing activities	(8,055)		(4,851)
Net cash provided by (used for) financing activities	(437)		(135)
Effect of changes in currency exchange rates on cash, cash equivalents, and restricted cash	44		(8)
Net increase (decrease) in cash, cash equivalents, and restricted cash	$	136	$	1,041

Operating Activities: Cash provided by operating activities reflects net income adjusted for certain non-cash items, including depreciation expense, amortization of intangible assets, asset impairments, and stock-based compensation, and the effects of changes in operating assets and liabilities. The increase in cash provided by operating activities for the first nine months of 2021 as compared to the first nine months of 2020 was primarily due to higher net income compared with the prior period and changes in working capital.

Investing Activities: For the first nine months of 2021, net cash used for investing activities consisted primarily of $7.67 billion of expenditures for property, plant, and equipment (net of partner contributions) and $422 million of net outflows from purchases, sales, and maturities of available-for-sale securities.

For the first nine months of 2020, net cash used for investing activities consisted primarily of $5.77 billion of expenditures for property, plant, and equipment (net of partner contributions) partially offset by $1.00 billion of net inflows from sales, maturities, and purchases of available-for-sale securities.

Financing Activities: For the first nine months of 2021, net cash used for financing activities consisted primarily of $150 million for the acquisition of 1.7 million shares of our common stock under our $10 billion share repurchase authorization, $139 million of payments on equipment purchase contracts, and $156 million of repayments of debt, net of proceeds from new borrowings, partially offset by $148 million of proceeds from common stock issued in connection with employee equity plans. In the third quarter of 2021, we received proceeds of $1.19 billion from the new 2024 Term Loan A and used the proceeds to repay the $1.19 billion outstanding under the Extinguished 2024 Term Loan A.

For the first nine months of 2020, net cash used for financing activities consisted primarily of $4.29 billion of cash payments to reduce our debt, including $2.50 billion to pay down borrowings under our Revolving Credit Facility, $621 million for IMFT Member Debt repayments, $534 million to prepay our 2025 Notes, $266 million to settle conversions of notes, and $171 million for scheduled repayment of finance leases; $744 million for the acquisition of Intel’s noncontrolling interest in IMFT; and $134 million for the acquisition of 2.8 million shares of our common stock under our $10 billion share repurchase authorization. Cash used for financing activities was partially offset by proceeds of $2.50 billion from our Revolving Credit Facility, $1.25 billion from the 2023 Notes, and $1.25 billion from the Extinguished 2024 Term Loan A.

See “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Debt.”

Settlement Obligations of Convertible Notes: See “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Debt – 2032D Convertible Senior Notes.”

Contractual Obligations: See “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Leases” and – Debt.”

Critical Accounting Estimates

For a discussion of our significant accounting estimates, see “Part II – Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Significant Accounting Estimates” of our Annual Report on Form 10-K for the year ended September 3, 2020. Except for the significant accounting estimate associated with inventories as discussed below, there have been no changes to our significant accounting estimates since our Annual Report on Form 10-K for the year ended September 3, 2020.

36 | 2021 Q3 10-Q

Inventories: Inventories are stated at the lower of cost or net realizable value, with cost being determined on a FIFO basis. Effective as of the beginning of the second quarter of 2021, we changed our method of inventory costing from average cost to FIFO. Cost includes depreciation, labor, material, and overhead costs, including product and process technology costs. Determining net realizable value of inventories involves significant judgments, including projecting future average selling prices and future sales volumes. To project average selling prices and sales volumes, we review recent sales volumes, existing customer orders, current contract prices, industry analyses of supply and demand, seasonal factors, general economic trends, and other information. Actual selling prices and volumes may vary significantly from projected prices and volumes due to the volatile nature of the semiconductor memory and storage markets. When these analyses reflect estimated net realizable values below our manufacturing costs, we record a charge to cost of goods sold in advance of when inventories are actually sold. As a result, the timing of when product costs are charged to costs of goods sold can vary significantly. Differences in forecasted average selling prices used in calculating lower of cost or net realizable value adjustments can result in significant changes in the estimated net realizable value of product inventories and accordingly the amount of write-down recorded. For example, a 5% variance in the estimated selling prices would have changed the estimated net realizable value of our inventory by approximately $400 million as of June 3, 2021. Due to the volatile nature of the semiconductor memory and storage markets, actual selling prices and volumes often vary significantly from projected prices and volumes, which could significantly impact cost of goods sold.

U.S. GAAP provides for products to be grouped into categories in order to compare costs to net realizable values. The amount of any inventory write-down can vary significantly depending on the determination of inventory categories. We review the major characteristics of product type and markets in determining the unit of account for which we perform the lower of cost or net realizable value analysis and categorize all inventories (including DRAM, NAND, and other memory) as a single group.

Recently Adopted Accounting Standards

See “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Recently Adopted Accounting Standards.”

Recently Issued Accounting Standards

See “Item 1. Financial Statements – Notes to Consolidated Financial Statements – Recently Issued Accounting Standards.”

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are affected by changes in currency exchange and interest rates. For further discussion about market risk and sensitivity analysis related to changes in currency exchange rates, see “Part II – Item 7A. Quantitative and Qualitative Disclosures About Market Risk” in our Annual Report on Form 10-K for the year ended September 3, 2020.

ITEM 4. CONTROLS AND PROCEDURES

An evaluation was carried out under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this report. Based upon that evaluation, the principal executive officer and principal financial officer concluded that those disclosure controls and procedures were effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act are recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to our management, including the principal executive officer and principal financial officer, to allow timely decision regarding disclosure.

During the third quarter of 2021, there were no changes in our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART II. OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

For a discussion of legal proceedings, see “Part I – Item 3. Legal Proceedings” of our Annual Report on Form 10-K for the year ended September 3, 2020 and the sections titled “Part I. Financial Information – Item 1. Financial Statements – Notes to Consolidated Financial Statements – Contingencies” and “Item 1A. Risk Factors” in this Quarterly Report on Form 10-Q, as well as in our Quarterly Reports on Form 10-Q for the first and second quarters of 2021.

SEC regulations require disclosure of certain proceedings related to environmental matters unless we reasonably believe that the related monetary sanctions, if any, will be less than a specified threshold. We use a threshold of $1 million for this purpose.

ITEM 1A. RISK FACTORS

In addition to the factors discussed elsewhere in this Form 10-Q, this section discusses important factors which could cause actual results or events to differ materially from those contained in any forward-looking statements made by us. The order of presentation is not necessarily indicative of the level of risk that each factor poses to us. Any of these factors could have a material adverse effect on our business, results of operations, financial condition, or stock price. Our operations could also be affected by other factors that are presently unknown to us or not considered significant.

Risk Factor Summary

Risks Related to Our Business, Operations, and Industry

•the effects of the COVID-19 pandemic;

•volatility in average selling prices of our products;

•our ability to maintain or improve gross margins;

•the highly competitive nature of our industry;

•our ability to develop and produce new memory and storage technologies, products, and markets;

•dependency on specific customers, concentration of revenue with a select number of customers, and customers who are located internationally;

•our international operations, including geopolitical risks;

•limited availability and quality of materials, supplies, and capital equipment and dependency on third-party service providers for ourselves and our customers;

•products that fail to meet specifications, are defective, or incompatible with end uses;

38 | 2021 Q3 10-Q

•disruptions to our manufacturing processes;

•breaches of our security systems or those of our customers, suppliers, or business partners;

•attracting, retaining, and motivating highly skilled employees;

•achieving or maintaining certain performance obligations associated with incentives from various governments;

•future acquisitions and/or alliances;

•restructure charges;

•customer responsible sourcing requirements and related regulations; and

•a downturn in the worldwide economy.

Risks Related to Intellectual Property and Litigation

•protecting our intellectual property and retaining key employees who are knowledgeable of and develop our intellectual property;

•legal proceedings and claims;

•allegations of anticompetitive conduct;

•risks associated with our former IMFT joint venture with Intel;

•claims that our products or manufacturing processes infringe or otherwise violate the intellectual property rights of others or failure to obtain or renew license agreements covering such intellectual property; and

•alleged patent infringement complaints in Chinese courts.

Risks Related to Laws and Regulations

•tariffs, trade restrictions, and/or trade regulations;

•tax expense and tax laws in key jurisdictions; and

•laws, regulations, or industry standards.

Risks Related to Capitalization and Financial Markets

•our ability to generate sufficient cash flows or obtain access to external financing;

•our debt obligations;

•changes in foreign currency exchange rates;

•counterparty default risk;

•volatility in the trading price of our common stock; and

•fluctuations in the amount and timing of our common stock repurchases and resulting impacts.

Risks Related to Our Business, Operations, and Industry

The effects of the COVID-19 pandemic could adversely affect our business, results of operations, and financial condition.

The effects of the public health crisis caused by the COVID-19 pandemic and the measures being taken to limit COVID-19’s spread are uncertain and difficult to predict, but may include, and in some cases, have included and may continue to include:

•A decrease in short-term and/or long-term demand and/or pricing for our products and a global economic downturn that could further reduce demand and/or pricing for our products, resulting from actions taken by governments, businesses, and/or the general public in an effort to limit exposure to and the spread of COVID-19, such as travel restrictions, quarantines, and business shutdowns or slowdowns;

•Negative impacts to our operations, including:

◦reductions in production levels, R&D activities, product development, technology transitions, yield enhancement activities, and qualification activities with our customers, resulting from our efforts to mitigate the impact of COVID-19 through measures we have enacted at our locations around the world in an effort to protect our employees’ and contractors’ health and well-being, including working from home, limiting the number of meeting attendees, reducing the number of people in certain of our sites at any one time, quarantines of team members, contractors, or vendors who are at risk of contracting, or have contracted, COVID-19, and limiting employee travel;

◦increased costs resulting from our efforts to mitigate the impact of COVID-19 through physical-distancing measures, working from home, upgrades to our sites, COVID-19 testing and vaccination, enhanced cleaning measures, and the increased use of personal protective equipment at our sites;

◦increased costs for, or unavailability of, transportation, raw materials, or other inputs necessary for the operation of our business;

◦reductions in, or cessation of operations at any site or in any jurisdiction resulting from government restrictions on movement and/or business operations or our measures to prevent and/or mitigate the spread of COVID-19 at one or more of our sites, such as our currently reduced workforce and output levels at our Muar, Malaysia facility and constraints on our engineering and other activities at our India facilities;

◦our inability to continue, or increased costs of, construction projects due to delays in obtaining materials, equipment, labor, engineering services, government permits, or any other essential aspect of projects, which could impact our ability to introduce new technologies, reduce costs, or meet customer demand;

◦disruptions to our supply chain in connection with the sourcing and transportation of materials, equipment and engineering support, and services from or in geographic areas that have been impacted by COVID-19 and by efforts to contain the spread of COVID-19; and

•Deterioration of worldwide credit and financial markets that could: limit our ability to obtain external financing to fund our operations and capital expenditures; result in losses on our holdings of cash and investments due to failures of financial institutions and other parties; or result in a higher rate of losses on our accounts receivables due to credit defaults.

While several COVID-19 vaccines have been approved and become available for use in the United States and certain other countries in recent months, we are unable to predict how widely utilized the vaccines ultimately will be, whether they will be effective in preventing the spread of COVID-19 (including its variant strains), and when or if normal economic activity and business operations will resume.

These effects, alone or taken together, could have a material adverse effect on our business, results of operations, legal exposure, or financial condition. A sustained, prolonged, or recurring outbreak could exacerbate the adverse impact of such measures.

Volatility in average selling prices for our semiconductor memory and storage products may adversely affect our business.

We have experienced significant volatility in our average selling prices, including dramatic declines as noted in the table below, and may continue to experience such volatility in the future. In some prior periods, average selling prices for our products have been below our manufacturing costs and we may experience such circumstances in the future. Average selling prices for our products that decline faster than our costs could have a material adverse effect on our business, results of operations, or financial condition.


	DRAM		NAND
	(percentage change in average selling prices)

2020 from 2019	(34)	%	(9)	%
2019 from 2018	(30)	%	(47)	%
2018 from 2017	36	%	(13)	%
2017 from 2016	18	%	(10)	%
2016 from 2015	(34)	%	(16)	%

We may be unable to maintain or improve gross margins.

Our gross margins are dependent, in part, upon continuing decreases in per gigabit manufacturing costs achieved through improvements in our manufacturing processes and product designs, including, but not limited to, process line-width, additional 3D memory layers, additional bits per cell (i.e., cell levels), architecture, number of mask layers, number of fabrication steps, and yield. In future periods, we may be unable to reduce our per gigabit manufacturing costs at sufficient levels to maintain or improve gross margins. Factors that may limit our ability to maintain or reduce costs include, but are not limited to, strategic product diversification decisions affecting product mix, the increasing complexity of manufacturing processes, difficulties in transitioning to smaller line-width process technologies, 3D memory layers, NAND cell levels, process complexity including number of mask layers and

40 | 2021 Q3 10-Q

fabrication steps, manufacturing yield, technological barriers, changes in process technologies, and new products that may require relatively larger die sizes.

Many factors may result in a reduction of our output or a delay in ramping production, which could lead to underutilization of our production assets. These factors may include, among others, a weak demand environment, industry oversupply, inventory surpluses, difficulties in ramping emerging technologies, declining selling prices, and changes in supply agreements. A significant portion of our manufacturing costs are fixed and do not vary proportionally with changes in production output. As a result, lower utilization and corresponding increases in our per gigabit manufacturing costs may adversely affect our gross margins, business, results of operations, or financial condition.

In addition, per gigabit manufacturing costs may also be affected by a broader product portfolio, which may have smaller production quantities and shorter product lifecycles. Our business and the markets we serve are subject to rapid technological changes and material fluctuations in demand based on end-user preferences. As a result, we may have work in process or finished goods inventories that could become obsolete or in amounts that are in excess of our customers’ demand. Consequently, we may incur charges in connection with obsolete or excess inventories. In addition, due to the customized nature of certain of the products we manufacture, we may be unable to sell certain finished goods inventories to alternative customers or manufacture in-process inventory to different specifications, which may result in excess and obsolescence charges in future periods. Our inability to maintain or improve gross margins could have a material adverse effect on our business, results of operations, or financial condition.

The semiconductor memory and storage markets are highly competitive.

We face intense competition in the semiconductor memory and storage markets from a number of companies, including Intel; Samsung Electronics Co., Ltd.; SK hynix Inc.; Kioxia Holdings Corporation; and Western Digital Corporation. Some of our competitors are large corporations or conglomerates that may have greater resources to invest in technology, capitalize on growth opportunities, and withstand downturns in the semiconductor markets in which we compete. Consolidation of industry competitors could put us at a competitive disadvantage as our competitors may benefit from increased manufacturing scale and a stronger product portfolio. In addition, some governments may provide, or have provided and may continue to provide, significant assistance, financial or otherwise, to some of our competitors or to new entrants and may intervene in support of national industries and/or competitors. In particular, we face the threat of increasing competition as a result of significant investment in the semiconductor industry by the Chinese government and various state-owned or affiliated entities that is intended to advance China’s stated national policy objectives. In addition, the Chinese government may restrict us from participating in the China market or may prevent us from competing effectively with Chinese companies. Some of our competitors may use aggressive pricing to obtain market share or take business of our key customers.

Our competitors generally seek to increase wafer capacity, improve yields, and reduce die size in their product designs which may result in significant increases in worldwide supply and downward pressure on prices. Increases in worldwide supply of semiconductor memory and storage also result from fabrication capacity expansions, either by way of new facilities, increased capacity utilization, or reallocation of other semiconductor production to semiconductor memory and storage production. Our competitors may increase capital expenditures resulting in future increases in worldwide supply. We, and some of our competitors, have plans to ramp, or are constructing or ramping, production at new fabrication facilities. Increases in worldwide supply of semiconductor memory and storage, if not accompanied by commensurate increases in demand, could lead to declines in average selling prices for our products and could materially adversely affect our business, results of operations, or financial condition. If competitors are more successful at developing or implementing new product or process technology, their products could have cost or performance advantages.

The competitive nature of our industry could have a material adverse effect on our business, results of operations, or financial condition.

Our future success depends on our ability to develop and produce competitive new memory and storage technologies.

Our key semiconductor memory and storage products and technologies face technological barriers to continue to meet long-term customer needs. These barriers include potential limitations on stacking additional 3D memory layers, increasing bits per cell (i.e., cell levels), meeting higher density requirements, and improving power consumption and reliability. We may face technological barriers to continue to shrink our products at our current or historical rate, which has generally reduced per-unit cost. We have invested and expect to continue to invest in R&D for new and existing products, which involves significant risk and uncertainties. We may be unable to recover our investment in R&D or otherwise realize the economic benefits of reducing die size or increasing memory and storage densities. Our competitors are working to develop new memory and storage technologies that may offer performance and/or cost advantages to existing technologies and render existing technologies obsolete. Accordingly, our future success may depend on our ability to develop and produce viable and competitive new memory and storage technologies. There can be no assurance of the following:

•that we will be successful in developing competitive new semiconductor memory and storage technologies;

•that we will be able to cost-effectively manufacture new products;

•that we will be able to successfully market these technologies; and

•that margins generated from sales of these products will allow us to recover costs of development efforts.

We develop and produce advanced memory and storage technologies and there can be no assurance that our efforts to develop and market new product technologies will be successful. Unsuccessful efforts to develop new memory and storage technologies could have a material adverse effect on our business, results of operations, or financial condition.

A significant portion of our revenue is concentrated with a select number of customers.

In each of the last three years, approximately one-half of our total revenue was from our top ten customers. A disruption in our relationship with any of these customers could adversely affect our business. We could experience fluctuations in our customer base or the mix of revenue by customer as markets and strategies evolve. Our customers’ demand for our products may fluctuate due to factors beyond our control. In addition, any consolidation of our customers could reduce the number of customers to whom our products may be sold. Our inability to meet our customers’ requirements or to qualify our products with them could adversely impact our revenue. Meaningful change in the inventory strategy of our customers, particularly those in China, could impact our industry bit demand growth outlook. The loss of, or restrictions on our ability to sell to, one or more of our major customers, such as those relating to Huawei described herein, or any significant reduction in orders from, or a shift in product mix by, customers could have a material adverse effect on our business, results of operations, or financial condition.

We face geopolitical and other risks associated with our international sales and operations that could materially adversely affect our business, results of operations, or financial condition.

In 2020, 52% of our revenue was from sales to customers who have headquarters located outside the United States. We ship our products to the locations specified by our customers. Customers with global supply chains and operations may request we deliver products to countries where they own or operate production facilities or to countries where they utilize third-party subcontractors or warehouses. As a result, 88% of our revenue in 2020 was from products shipped to customer locations outside the United States.

A substantial portion of our operations are conducted in Taiwan, Singapore, Japan, China, Malaysia, and India, and many of our customers, suppliers, and vendors also operate internationally. Our operations, and the global supply chain of the technology industry, are subject to a number of risks, including the effects of actions and policies of various governments across our global operations and supply chain. For example, political, economic, or other actions from China could impact Taiwan and its economy, and may adversely affect our operations in Taiwan, our customers, and the technology industry supply chain. In addition, the U.S. government has in the past restricted American firms from selling products and software to certain of our customers and may in the future impose similar bans or other restrictions on sales to one or more of our significant customers. These restrictions may not prohibit our competitors from selling similar products to our customers, which may result in our loss of sales and market share. Even when such restrictions are lifted, financial or other penalties or continuing export restrictions imposed with respect to our customers could have a continuing negative impact on our future revenue and results of

42 | 2021 Q3 10-Q

operations, and we may not be able to recover any customers or market share we lose while complying with such restrictions.

Our international sales and operations are subject to a variety of risks, including:

•export and import duties, changes to import and export regulations, customs regulations and processes, and restrictions on the transfer of funds, including currency controls in China, which could negatively affect the amount and timing of payments from certain of our customers and, as a result, our cash flows;

•imposition of bans on sales of goods or services to one or more of our significant foreign customers;

•public health issues (for example, an outbreak of a contagious disease such as COVID-19, Severe Acute Respiratory Syndrome (“SARS-CoV”), avian and swine influenza, measles, or Ebola);

•compliance with U.S. and international laws involving international operations, including the Foreign Corrupt Practices Act of 1977, as amended, export and import laws, and similar rules and regulations;

•theft of intellectual property;

•political and economic instability, including the effects of disputes between China and Taiwan;

•government actions or civil unrest preventing the flow of products, including delays in shipping and obtaining products, cancellation of orders, or loss or damage of products;

•problems with the transportation or delivery of products;

•issues arising from cultural or language differences and labor unrest;

•longer payment cycles and greater difficulty in collecting accounts receivable;

•compliance with trade, technical standards, and other laws in a variety of jurisdictions;

•contractual and regulatory limitations on the ability to maintain flexibility with staffing levels;

•disruptions to manufacturing or R&D activities as a result of actions imposed by foreign governments;

•changes in economic policies of foreign governments; and

•difficulties in staffing and managing international operations.

If we or our customers, suppliers, or vendors are impacted by any of these risks, it could have a material adverse effect on our business, results of operations, or financial condition.

Our business, results of operations, or financial condition could be adversely affected by the limited availability and quality of materials, supplies, and capital equipment, or the dependency on third-party service providers for ourselves and our customers.

Our supply chain and operations are dependent on the availability of materials that meet exacting standards and the use of third parties to provide us with components and services. We generally have multiple sources of supply for our materials and services. However, only a limited number of suppliers are capable of delivering certain materials and services that meet our standards and, in some cases, materials, components, or services are provided by a single supplier. Various factors could reduce the availability of materials or components such as chemicals, silicon wafers, gases, photoresist, controllers, substrates, lead frames, printed circuit boards, targets, and reticle glass blanks. Shortages or increases in lead times have occurred in the past and may occur from time to time in the future. Our manufacturing processes are also dependent on our relationships with third-party manufacturers of controllers, analog integrated circuits, and other components used in a number of our products and with outsourced semiconductor assembly and test providers, contract manufacturers, logistic carriers, and other service providers. Although we have certain long-term contracts with some of our third-party service providers, most of these contracts do not provide for long-term capacity commitments. To the extent we do not have firm commitments from our third-party service providers over a specific time period or for any specific quantity, our service providers may allocate capacity to their other customers and capacity for our materials may not be available when we need it or at reasonable prices. Inflationary pressures and shortages may increase costs for materials, supplies, and services. Regardless of contract structure, large swings in demand may exceed our contracted supply and/or our suppliers’ capacity to meet those demand changes resulting in a shortage of parts or materials needed to manufacture our products.

Certain materials are primarily available in a limited number of countries, including rare earth elements, minerals, and metals available primarily from China. Trade disputes or other political conditions, economic conditions, or public health issues, such as COVID-19, may limit our ability to obtain such materials. Although these rare earth and other materials are generally available from multiple suppliers, China is the predominant producer of certain of these materials. If China were to restrict or stop exporting these materials, our suppliers’ ability to obtain such supply may be constrained and we may be unable to obtain sufficient quantities, or obtain supply in a timely manner, or at a

commercially reasonable cost. Constrained supply of rare earth elements, minerals, and metals may restrict our ability to manufacture certain of our products and make it difficult or impossible to compete with other semiconductor memory manufacturers who are able to obtain sufficient quantities of these materials from China.

We and/or our suppliers and service providers could be affected by tariffs, embargoes, or other trade restrictions, as well as laws and regulations enacted in response to concerns regarding climate change, conflict minerals, responsible sourcing practices, public health crises, contagious disease outbreaks, or other matters, which could limit the supply of our materials and/or increase the cost. Environmental regulations could limit our ability to procure or use certain chemicals or materials in our operations or products. In addition, disruptions in transportation lines could delay our receipt of materials. Lead times for the supply of materials have been extended in the past. Our ability to procure components to repair equipment essential for our manufacturing processes could also be negatively impacted by various restrictions or disruptions in supply chains, among other items. The disruption of our supply of materials, components, or services, or the extension of our lead times could have a material adverse effect on our business, results of operations, or financial condition. Similarly, if our customers experience disruptions to their supplies, materials, components, or services, or the extension of their lead times, they may reduce, cancel, or alter the timing of their purchases with us, which could have a material adverse effect on our business, results of operations, or financial condition.

Our operations are dependent on our ability to procure advanced semiconductor manufacturing equipment that enables the transition to lower cost manufacturing processes. For certain key types of equipment, including photolithography tools, we are sometimes dependent on a single supplier. From time to time, we have experienced difficulties in obtaining some equipment on a timely basis due to suppliers’ limited capacity. Our inability to obtain equipment on a timely basis could adversely affect our ability to transition to next generation manufacturing processes and reduce our costs. Delays in obtaining equipment could also impede our ability to ramp production at new facilities and could increase our overall costs of a ramp. Our inability to obtain advanced semiconductor manufacturing equipment in a timely manner could have a material adverse effect on our business, results of operations, or financial condition.

Our construction projects to expand production and R&D capacity are highly dependent on available sources of labor, materials, equipment, and services. Increasing demand, supply constraints, inflation, and other market conditions could result in increasing shortages and higher costs for these items. Difficulties in obtaining these resources could result in significant delays in completion of our construction projects and cost increases, which could have a material adverse effect on our business, results of operations, or financial condition.

Our inability to source materials, supplies, capital equipment, or third-party services could affect our overall production output and our ability to fulfill customer demand. Significant or prolonged shortages of our products could halt customer manufacturing and damage our relationships with these customers. For example, certain automotive manufacturers have experienced shortages of non-memory components from other suppliers, forcing a curtailment of production lines. Any such damage to our customer relationships could have a material adverse effect on our business, results of operations, or financial condition.

New product and market development may be unsuccessful.

We are developing new products, including system-level memory and storage products and solutions, which complement our traditional products or leverage their underlying design or process technology. We have made significant investments in product and process technology and anticipate expending significant resources for new semiconductor product and system-level solution development over the next several years. Additionally, we are increasingly differentiating our products and solutions to meet the specific demands of our customers, which increases our reliance on our customers’ ability to accurately forecast the needs and preferences of their customers. As a result, our product demand forecasts may be impacted significantly by the strategic actions of our customers.

For certain of our markets, it is important that we deliver products in a timely manner with increasingly advanced performance characteristics at the time our customers are designing and evaluating samples for their products. If we do not meet their product design schedules, our customers may exclude us from further consideration as a supplier for those products. The process to develop new products requires us to demonstrate advanced functionality and performance, often well in advance of a planned ramp of production, in order to secure design wins with our customers. The effects of the public health crisis caused by the COVID-19 pandemic and the measures being taken to limit COVID-19’s spread could negatively impact our ability to meet anticipated timelines and/or expected or

44 | 2021 Q3 10-Q

required quality standards with respect to the development of certain of our products. In addition, some of our components have long lead-times, requiring us to place orders several months in advance of anticipated demand. Such long lead-times increase the risk of excess inventory or loss of sales in the event our forecasts vary substantially from actual demand. There can be no assurance that:

•our product development efforts will be successful;

•we will be able to cost-effectively manufacture new products;

•we will be able to successfully market these products;

•we will be able to establish or maintain key relationships with customers, or that we will not be prohibited from working with certain customers, for specific chip set or design requirements;

•we will be able to introduce new products into the market and qualify them with our customers on a timely basis; or

•margins generated from sales of these products will allow us to recover costs of development efforts.

Our unsuccessful efforts to develop new products and solutions could have a material adverse effect on our business, results of operations, or financial condition.

Increases in sales of system solutions may increase our dependency upon specific customers and our costs to develop and qualify our system solutions.

Our development of system-level memory and storage products is dependent, in part, upon successfully identifying and meeting our customers’ specifications for those products. Developing and manufacturing system-level products with specifications unique to a customer increases our reliance upon that customer for purchasing our products at sufficient volumes and prices in a timely manner. If we fail to identify or develop products on a timely basis, or at all, that comply with our customers’ specifications or achieve design wins with our customers, we may experience a significant adverse impact on our revenue and margins. Even if our products meet customer specifications, our sales of system-level solutions are dependent upon our customers choosing our products over those of our competitors and purchasing our products at sufficient volumes and prices. Our competitors’ products may be less costly, provide better performance, or include additional features when compared to our products. Our long-term ability to sell system-level memory and storage products is reliant upon our customers’ ability to create, market, and sell their products containing our system-level solutions at sufficient volumes and prices in a timely manner. If we fail to successfully develop and market system-level products, our business, results of operations, or financial condition may be materially adversely affected.

Even if we are successful in selling system-level solutions to our customers in sufficient volume, we may be unable to generate sufficient profit if our per-unit manufacturing costs exceed our per-unit selling prices. Manufacturing system-level solutions to customer specifications requires a longer development cycle, as compared to discrete products, to design, test, and qualify, which may increase our costs. Additionally, some of our system solutions are increasingly dependent on sophisticated firmware that may require significant customization to meet customer specifications, which increases our costs and time to market. Additionally, we may need to update our firmware or develop new firmware as a result of new product introductions or changes in customer specifications and/or industry standards, which increases our costs. System complexities and extended warranties for system-level products could also increase our warranty costs. Our failure to cost-effectively manufacture system-level solutions and/or firmware in a timely manner may result in reduced demand for our system-level products and could have a material adverse effect on our business, results of operations, or financial condition.

Products that fail to meet specifications, are defective, or that are otherwise incompatible with end uses could impose significant costs on us.

Products that do not meet specifications or that contain, or are perceived by our customers to contain, defects or that are otherwise incompatible with end uses could impose significant costs on us or otherwise materially adversely affect our business, results of operations, or financial condition. From time to time, we experience problems with nonconforming, defective, or incompatible products after we have shipped such products. In recent periods, we have further diversified and expanded our product offerings, which could potentially increase the chance that one or more of our products could fail to meet specifications in a particular application. Our products and solutions may be deemed fully or partially responsible for functionality in our customers’ products and may result in sharing or shifting of product or financial liability from our customers to us for costs incurred by the end user as a result of our customers’ products failing to perform as specified. In addition, if our products and solutions perform critical

functions in our customers’ products or are used in high-risk consumer end products, such as autonomous driver assistance programs, home and enterprise security, smoke and noxious gas detectors, medical monitoring equipment, or wearables for child and elderly safety, our potential liability may increase. We could be adversely affected in several ways, including the following:

•we may be required or agree to compensate customers for costs incurred or damages caused by defective or incompatible products and to replace products;

•we could incur a decrease in revenue or adjustment to pricing commensurate with the reimbursement of such costs or alleged damages; and

•we may encounter adverse publicity, which could cause a decrease in sales of our products or harm our reputation or relationships with existing or potential customers.

Any of the foregoing items could have a material adverse effect on our business, results of operations, or financial condition.

If our manufacturing process is disrupted by operational issues, natural disasters, or other events, our business, results of operations, or financial condition could be materially adversely affected.

We and our subcontractors manufacture products using highly complex processes that require technologically advanced equipment and continuous modification to improve yields and performance. Difficulties in the manufacturing process or the effects from a shift in product mix can reduce yields or disrupt production and may increase our per gigabit manufacturing costs. We and our subcontractors maintain operations and continuously implement new product and process technology at manufacturing facilities, which are widely dispersed in multiple locations in several countries including the United States, Singapore, Taiwan, Japan, Malaysia, and China. As a result of the necessary interdependence within our network of manufacturing facilities, an operational disruption at one of our or a subcontractor’s facilities may have a disproportionate impact on our ability to produce many of our products.

From time to time, there have been disruptions in the manufacturing process as a result of power outages, improperly functioning equipment, disruptions in supply of raw materials or components, or equipment failures. We have manufacturing and other operations in locations subject to natural occurrences such as severe weather and geological events, including earthquakes, tsunamis or other occurrences, such as the recent Taiwan drought, that could disrupt operations, resulting in increased costs, or disruptions to our or our suppliers’ or customers’ manufacturing operations. In addition, our suppliers and customers also have operations in such locations. Additionally, other events including political or public health crises, such as an outbreak of contagious diseases like COVID-19, SARS-CoV, avian and swine influenza, measles, or Ebola, may affect our production capabilities or that of our suppliers, including as a result of quarantines, closures of production facilities, lack of supplies, or delays caused by restrictions on travel or shipping. For example, recently in response to increasing positive cases of COVID-19 in Johor State, Malaysia, we have reduced our workforce on-site at our Muar facility, which has reduced output levels from that facility. The events noted above have occurred from time to time and may occur in the future. As a result, in addition to disruptions to operations, our insurance premiums may increase or we may not be able to fully recover any sustained losses through insurance.

If production is disrupted for any reason, manufacturing yields may be adversely affected, or we may be unable to meet our customers’ requirements and they may purchase products from other suppliers. This could result in a significant increase in manufacturing costs, loss of revenue, or damage to customer relationships, any of which could have a material adverse effect on our business, results of operations, or financial condition.

Breaches of our security systems, or those of our customers, suppliers, or business partners, could expose us to losses.

We maintain a system of controls over the physical security of our facilities. We also manage and store various proprietary information and sensitive or confidential data relating to our operations. In addition, we process, store, and transmit large amounts of data relating to our customers and employees, including sensitive personal information. Unauthorized persons or employees may gain access to our facilities or network systems to steal trade secrets or other proprietary information, compromise confidential information, create system disruptions, or cause shutdowns, including through cyberattacks. These parties may also be able to develop and deploy viruses, worms, and other malicious software programs that disrupt our operations and create security vulnerabilities. Breaches of

46 | 2021 Q3 10-Q

our physical security, attacks on our network systems, or breaches or attacks on our customers, suppliers, or business partners who have confidential or sensitive information regarding us and our customers and suppliers, could result in significant losses and damage our reputation with customers and suppliers and may expose us to litigation if the confidential information of our customers, suppliers, or employees is compromised. The foregoing could have a material adverse effect on our business, results of operations, or financial condition.

We must attract, retain, and motivate highly skilled employees.

To remain competitive, we must attract, retain, and motivate executives, and other highly skilled, diverse employees, as well as effectively manage or plan for succession for key employees. Competition for experienced employees in our industry continues to be intense. Hiring and retaining qualified executives, engineers, technical staff, and sales representatives is critical to our business. Our inability to attract, retain, or effectively manage or plan for succession of key employees may inhibit our ability to maintain or expand our business operations. Additionally, changes to immigration policies in the numerous countries in which we operate, including the United States, as well as restrictions on global travel as a result of local or global public health crises requiring quarantines or other precautions to limit exposure to infectious diseases, may limit our ability to hire and/or retain talent in, or transfer talent to, specific locations. If our total compensation programs and workplace culture cease to be viewed as competitive and inclusive, our ability to attract, retain, and motivate employees could be weakened, which could have a material adverse effect on our business, results of operations, or financial condition.

Our incentives from various governments are conditional upon achieving or maintaining certain performance obligations and are subject to reduction, termination, or clawback.

We have received, and may in the future continue to receive, benefits and incentives from national, state, and local governments in various regions of the world designed to encourage us to establish, maintain, or increase investment, workforce, or production in those regions. These incentives may take various forms, including grants, loan subsidies, and tax arrangements, and typically require us to perform or maintain certain levels of investment, capital spending, employment, technology deployment, or research and development activities to qualify for such incentives. We cannot guarantee that we will successfully achieve performance obligations required to qualify for these incentives or that the granting agencies will provide such funding. These incentive arrangements typically provide the granting agencies with rights to audit our performance with their terms and obligations. Such audits could result in modifications to, or termination of, the applicable incentive program. The incentives we receive could be subject to reduction, termination, or clawback, and any decrease or clawback of government incentives could have a material adverse effect on our business, results of operations, or financial condition.

We may make future acquisitions and/or alliances, which involve numerous risks.

Acquisitions and the formation or operation of alliances, such as joint ventures and other partnering arrangements, involve numerous risks, including the following:

•integrating the operations, technologies, and products of acquired or newly formed entities into our operations;

•increasing capital expenditures to upgrade and maintain facilities;

•increased debt levels;

•the assumption of unknown or underestimated liabilities;

•the use of cash to finance a transaction, which may reduce the availability of cash to fund working capital, capital expenditures, R&D expenditures, and other business activities;

•diverting management’s attention from daily operations;

•managing larger or more complex operations and facilities and employees in separate and diverse geographic areas;

•hiring and retaining key employees;

•requirements imposed by government authorities in connection with the regulatory review of a transaction, which may include, among other things, divestitures or restrictions on the conduct of our business or the acquired business;

•inability to realize synergies or other expected benefits;

•failure to maintain customer, vendor, and other relationships;

•inadequacy or ineffectiveness of an acquired company’s internal financial controls, disclosure controls and procedures, compliance programs, and/or environmental, health and safety, anti-corruption, human resource, or other policies or practices; and

•impairment of acquired intangible assets, goodwill, or other assets as a result of changing business conditions, technological advancements, or worse-than-expected performance of the acquired business.

The global memory and storage industry has experienced consolidation and may continue to consolidate. We engage, from time to time, in discussions regarding potential acquisitions and similar opportunities. To the extent we are successful in completing any such transactions, we could be subject to some or all of the risks described above, including the risks pertaining to funding, assumption of liabilities, integration challenges, and increases in debt that may accompany such transactions. Acquisitions of, or alliances with, technology companies are inherently risky and may not be successful and could have a material adverse effect on our business, results of operations, or financial condition.

We may incur restructure charges in future periods.

From time to time, we have, and in the future we may, enter into restructure initiatives in order to, among other items, streamline our operations; respond to changes in business conditions, our markets, or product offerings; or to centralize certain key functions. We may not realize expected savings or other benefits from our restructure activities and may incur additional restructure charges or other losses in future periods associated with other initiatives.

We have ceased development of 3D XPoint technology and on June 30, 2021, we announced that we have entered into a definitive agreement to sell our Lehi facility that was dedicated to 3D XPoint production to Texas Instruments for cash consideration of $900 million. There is no assurance that we will be able to close the sale to TI in a timely manner or at all. The net assets and liabilities of the Lehi facility were classified as held for sale and are carried at the net consideration expected to be realized from the sale. We recognized a $435 million impairment charge in the third quarter of 2021 and could recognize additional losses as a result of changes in the assets and liabilities prior to the closing date of the transaction. Our inability to close the transaction in a timely manner or additional impairment losses could adversely affect our business, results of operations, or financial condition.

In connection with any restructure initiatives, we could incur restructure charges, loss of production output, loss of key personnel, disruptions in our operations, and difficulties in the timely delivery of products, which could have a material adverse effect on our business, results of operations, or financial condition.

Compliance with customer responsible sourcing requirements and related regulations could limit the supply and increase the cost of certain materials, supplies, and services used in manufacturing our products.

Many of our customers have adopted responsible sourcing programs that require us to periodically report on our supply chain and responsible sourcing efforts to ensure we source the materials, supplies, and services we use and incorporate into the products we sell in a manner that is consistent with their programs. Some of our customers may elect to disqualify us as a supplier or reduce purchases from us if we are unable to verify that our products meet the specifications of their responsible sourcing programs. Meeting customer requirements may limit the sourcing and availability of some of the materials, supplies, and services we use, particularly when the availability of such materials, supplies, and services is concentrated to a limited number of suppliers. This may affect our ability and/or the cost to obtain sufficient quantities of materials, supplies, and services necessary for the manufacture of our products.

Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and its implementing SEC regulations impose supply chain due diligence and disclosure requirements for certain manufacturers of products containing specific minerals that may originate in or near the Democratic Republic of the Congo and finance or benefit local armed groups. These conflict minerals are commonly found in materials used in the manufacture of semiconductors.

Our inability to comply with customers’ requirements for responsible sourcing or with related regulations could have a material adverse effect on our business, results of operations, or financial condition.

48 | 2021 Q3 10-Q

A downturn in the worldwide economy may harm our business.

The health crisis caused by COVID-19 has adversely affected economic conditions and caused a downturn in the worldwide economy. Downturns in the worldwide economy, including the downturn driven by the COVID-19 pandemic, have adversely affected our business in the past. Adverse economic conditions affect demand for devices that incorporate our products, such as personal computers, smartphones, automobiles, SSDs, and servers. Reduced demand for these or other products could result in significant decreases in our average selling prices and product sales. Future downturns could also adversely affect our business. In addition, to the extent our customers or distributors have elevated inventory levels, we may experience a decrease in short-term and/or long-term demand and/or pricing for our products.

A deterioration of conditions in worldwide credit markets could limit our ability to obtain external financing to fund our operations and capital expenditures. In addition, we may experience losses on our holdings of cash and investments due to failures of financial institutions and other parties. Difficult economic conditions may also result in a higher rate of losses on our accounts receivable due to credit defaults. As a result, downturns in the worldwide economy could have a material adverse effect on our business, results of operations, or financial condition.

Risks Related to Intellectual Property and Litigation

We may be unable to protect our intellectual property or retain key employees who are knowledgeable of and develop our intellectual property.

We maintain a system of controls over our intellectual property, including U.S. and foreign patents, trademarks, copyrights, trade secrets, licensing arrangements, confidentiality procedures, non-disclosure agreements with employees, consultants, and vendors, and a general system of internal controls. Despite our system of controls over our intellectual property, it may be possible for our current or future competitors to obtain, copy, use, or disclose, illegally or otherwise, our product and process technology or other proprietary information. The laws of some foreign countries may not protect our intellectual property to the same degree as do U.S. laws, and our confidentiality, non-disclosure, and non-compete agreements may be unenforceable or difficult and costly to enforce.

Additionally, our ability to maintain and develop intellectual property is dependent upon our ability to attract, develop, and retain highly skilled employees. Global competition for such skilled employees in our industry is intense. A decline in our operating results and/or stock price may adversely affect our ability to retain key employees whose compensation is dependent, in part, upon the market price of our common stock, achieving certain performance metrics, levels of company profitability, or other financial or company-wide performance. If our competitors or future entrants into our industry are successful in hiring our employees, they may directly benefit from the knowledge these employees gained while they were under our employment.

Our inability to protect our intellectual property or retain key employees who are knowledgeable of and develop our intellectual property could have a material adverse effect on our business, results of operations, or financial condition.

Legal proceedings and claims could have a material adverse effect on our business, results of operations, or financial condition.

From time to time we are subject to various legal proceedings and claims that arise out of the ordinary conduct of our business or otherwise, both domestically and internationally. See “Part II. Other Information – Item 1. Legal Proceedings.” Any claim, with or without merit, could result in significant legal fees that could negatively impact our financial results, disrupt our operations, and require significant attention from our management. We could be subject to litigation, claims, or arbitration disputes arising from our relationships with vendors or customers, supply agreements, or contractual obligations with our subcontractors or business partners. We may also be associated with and subject to litigation arising from the actions of our vendors, subcontractors, or business partners. We may also be subject to litigation or claims as a result of our indemnification obligations, including obligations to defend our customers against third-party claims asserting infringement of certain intellectual property rights, which may include patents, trademarks, copyrights, or trade secrets. We may also be subject to claims or litigation arising from the terms of our product warranties or from product liability claims. As we continue to focus on developing system solutions with manufacturers of consumer products, including autonomous driving, augmented reality, and others,

we may be exposed to greater potential for personal liability claims against us as a result of consumers’ use of those products. We, our officers, or our directors could also be subject to claims of alleged violations of securities laws. There can be no assurance that we are adequately insured to protect against all claims and potential liabilities, and we may elect to self-insure with respect to certain matters. Exposures to various legal proceedings and claims could lead to significant costs and expenses as we defend claims, are required to pay damage awards, or enter into settlement agreements, any of which could have a material adverse effect on our business, results of operations, or financial condition.

We are subject to allegations of anticompetitive conduct.

We are unable to predict the outcome of these matters and cannot make a reasonable estimate of the potential loss or range of possible losses. The final resolution of these matters could result in significant liability and could have a material adverse effect on our business, results of operations, or financial condition. See “Part I. Financial Information – Item 1. Financial Statements – Notes to Consolidated Financial Statements – Contingencies.”

We face risks associated with our former IMFT joint venture with Intel.

We face risks from our arbitration proceeding with Intel in connection with our former IMFT joint venture, in which we and Intel have made claims against each other for damages relating to the joint venture. For information regarding the arbitration proceeding, see “Part I. Financial Information – Item 1. Financial Statements – Notes to Consolidated Financial Statements – Contingencies.” The foregoing could have a material adverse effect on our business, results of operations, or financial condition.

50 | 2021 Q3 10-Q

Claims that our products or manufacturing processes infringe or otherwise violate the intellectual property rights of others, or failure to obtain or renew license agreements covering such intellectual property, could materially adversely affect our business, results of operations, or financial condition.

As is typical in the semiconductor and other high technology industries, from time to time others have asserted, and may in the future assert, that our products or manufacturing processes infringe upon, misappropriate, misuse, or otherwise violate their intellectual property rights. We are unable to predict the outcome of these assertions made against us. Any of these types of claims, regardless of the merits, could subject us to significant costs to defend or resolve such claims and may consume a substantial portion of management’s time and attention. As a result of these claims, we may be required to:

•pay significant monetary damages, fines, royalties, or penalties;

•enter into license or settlement agreements covering such intellectual property rights;

•make material changes to or redesign our products and/or manufacturing processes; and/or

•cease manufacturing, having made, selling, offering for sale, importing, marketing, or using products and/or manufacturing processes in certain jurisdictions.

We may not be able to take any of the actions described above on commercially reasonable terms and any of the foregoing results could have a material adverse effect on our business, results of operations, or financial condition. See “Part I. Financial Information – Item 1. Financial Statements – Notes to Consolidated Financial Statements – Contingencies.”

We have a number of intellectual property license agreements. Some of these license agreements require us to make one-time or periodic payments. We may need to obtain additional licenses or renew existing license agreements in the future. We are unable to predict whether these license agreements can be obtained or renewed on terms acceptable to us. The failure to obtain or renew licenses as necessary could have a material adverse effect on our business, results of operations, or financial condition.

We have been served with complaints in Chinese courts alleging patent infringement.

We have been served with complaints in Chinese courts alleging that we infringe certain Chinese patents by manufacturing and selling certain products in China. The complaints seek orders requiring us to destroy inventory of the accused products and equipment for manufacturing the accused products in China; to stop manufacturing, using, selling, and offering for sale the accused products in China; and to pay damages plus court fees.

We are unable to predict the outcome of these assertions of infringement made against us and cannot make a reasonable estimate of the potential loss or range of possible losses. A determination that our products or manufacturing processes infringe the intellectual property rights of others or entering into a license agreement covering such intellectual property could result in significant liability and/or require us to make material changes to our operations in China, products, and/or manufacturing processes. Any of the foregoing could have a material adverse effect on our business, results of operations, or financial condition. See “Part I. Financial Information – Item 1. Financial Statements – Notes to Consolidated Financial Statements – Contingencies.”

The acquisition of our ownership interest in Inotera from Qimonda AG (“Qimonda”) has been challenged by the administrator of the insolvency proceedings for Qimonda.

In January 2011, Dr. Michael Jaffé, administrator for Qimonda’s insolvency proceedings, filed suit against Micron and Micron Semiconductor B.V. (“Micron B.V.”), in the District Court of Munich, Civil Chamber. The complaint seeks to void a share purchase agreement between Micron B.V. and Qimonda signed in 2008, pursuant to which Micron B.V. purchased substantially all of Qimonda’s shares of Inotera, representing approximately 18% of Inotera’s outstanding shares at that time, and seeks an order requiring us to re-transfer those shares to the Qimonda estate. The complaint also seeks, among other things, to recover damages for the alleged value of the joint venture relationship with Inotera and to terminate a patent cross-license between us and Qimonda entered into at the same time as the share purchase agreement. See “Part I. Financial Information – Item 1. Financial Statements – Notes to Consolidated Financial Statements – Contingencies” for further information regarding the matter.

We are unable to predict the outcome of the matter and cannot make a reasonable estimate of the potential loss or range of possible losses. The final resolution of this lawsuit could result in the loss of the Inotera shares or monetary

damages, unspecified damages based on the benefits derived by Micron B.V. from the ownership of the Inotera shares, and/or the termination of the patent cross-license, which could have a material adverse effect on our business, results of operations, or financial condition.

Risks Related to Laws and Regulations

Increases in tariffs or other trade restrictions or taxes on our or our customers’ products or equipment and supplies could have an adverse impact on our operations.

In 2020, 88% of our revenue was from products shipped to customer locations outside the United States. We also purchase a significant portion of equipment and supplies from suppliers outside the United States. Additionally, a significant portion of our facilities are located outside the United States, including in Taiwan, Singapore, Japan, Malaysia, and China.

The United States and other countries have levied tariffs and taxes on certain goods. General trade tensions between the United States and China have been escalating since 2018, with U.S. tariffs on Chinese goods and retaliatory Chinese tariffs on U.S. goods. Some of our products are included in these tariffs. Higher duties on existing tariffs and further rounds of tariffs have been announced or threatened by U.S. and Chinese leaders. Additionally, the United States has threatened to impose tariffs on goods imported from other countries, which could also impact certain of our customers’ or our operations. If the United States were to impose current or additional tariffs on components that we or our suppliers source, our cost for such components would increase. We may also incur increases in manufacturing costs and supply chain risks due to our efforts to mitigate the impact of tariffs on our customers and our operations. Additionally, tariffs on our customers’ products could impact their sales of such end products, resulting in lower demand for our products.

We cannot predict what further actions may ultimately be taken with respect to tariffs or trade relations between the United States and other countries, what products may be subject to such actions, or what actions may be taken by other countries in retaliation. Further changes in trade policy, tariffs, additional taxes, restrictions on exports or other trade barriers, or restrictions on supplies, equipment, and raw materials including rare earth minerals, may limit our ability to produce products, increase our selling and/or manufacturing costs, decrease margins, reduce the competitiveness of our products, or inhibit our ability to sell products or purchase necessary equipment and supplies, which could have a material adverse effect on our business, results of operations, or financial condition.

Trade regulations have restricted our ability to sell our products to several customers, could restrict our ability to sell our products to other customers or in certain markets, or could otherwise restrict our ability to conduct operations.

International trade disputes have led, and may continue to lead, to new and increasing trade barriers and other protectionist measures that can increase our manufacturing costs, make our products less competitive, reduce demand for our products, limit our ability to sell to certain customers or markets, limit our ability to procure components or raw materials, impede or slow the movement of our goods across borders, impede our ability to perform R&D activities, or otherwise restrict our ability to conduct operations. Increasing protectionism, economic nationalism, and national security concerns may lead to further changes in trade policy, domestic sourcing initiatives, or other formal and informal measures that could make it more difficult to sell our products in, or restrict our access to, some markets and/or customers.

Escalating tensions between the United States and China have led to increased trade restrictions and have affected customer ordering patterns. For example, the U.S. Bureau of Industry and Security (“BIS”) has enacted increasingly broad trade restrictions with respect to Huawei (which represented approximately 10% of our revenue in the fourth quarter of 2020 and 12% in 2019), culminating with restrictions that took effect on September 15, 2020 and that currently prevent us and many other companies from shipping products to Huawei. We cannot predict the duration these restrictions will remain in place, whether the BIS will grant us or others licenses to ship products to Huawei, or whether the BIS or other U.S. or foreign government entities will enact similar restrictions with respect to other customers, markets, or products. We may not be able to replace the lost revenue opportunities associated with such restrictions.

52 | 2021 Q3 10-Q

The United States has also imposed other restrictions on the export of U.S. regulated products and technology to certain Chinese technology companies, including certain of our customers. These restrictions have reduced our sales, and continuing or future restrictions could adversely affect our financial results, result in reputational harm to us due to our relationship with such companies, or lead such companies to develop or adopt technologies that compete with our products. It is difficult to predict what further trade-related actions governments may take, and we may be unable to quickly and effectively react to such actions. For example, U.S. legislation has expanded the power of the U.S. Department of Commerce to restrict the export of “emerging and foundational technologies” yet to be identified, which could impact our current or future products.

Trade disputes and protectionist measures, or continued uncertainty about such matters, could result in declining consumer confidence and slowing economic growth or recession, and could cause our customers to reduce, cancel, or alter the timing of their purchases with us. Sustained trade tensions could lead to long-term changes in global trade and technology supply chains, which could adversely affect our business and growth prospects. Trade restrictions that may be imposed by the United States, China, or other countries may impact our business in ways we cannot reasonably quantify, including that some of our customers’ products which incorporate our solutions may also be impacted. Restrictions on our ability to sell and ship our products to Huawei could have an adverse effect on our business. In addition, further increases in trade restrictions or barriers may negatively impact our revenue, and any licenses we have received or could receive in the future could be rendered ineffective. Any such changes may have an adverse effect on our business, results of operations, or financial condition.

The technology industry is subject to intense media, political, and regulatory scrutiny, which can increase our exposure to government investigations, legal actions, and penalties. Although we have policies, controls, and procedures designed to help ensure compliance with applicable laws, there can be no assurance that our employees, contractors, suppliers, or agents will not violate such laws or our policies. Violations of trade laws, restrictions, or regulations can result in fines; criminal sanctions against us or our officers, directors, or employees; prohibitions on the conduct of our business; and damage to our reputation.

We may incur additional tax expense or become subject to additional tax exposure.

We operate in a number of locations outside the United States, including Singapore, where we have tax incentive arrangements that are conditional, in part, upon meeting certain business operations and employment thresholds. Our domestic and international taxes are dependent upon the geographic mix of our earnings among these jurisdictions. Our provision for income taxes and cash tax liabilities in the future could be adversely affected by numerous factors, including challenges by tax authorities to our tax positions and intercompany transfer pricing arrangements, failure to meet performance obligations with respect to tax incentive agreements, expanding our operations in various countries, and changes in tax laws and regulations. Additionally, we file income tax returns with the U.S. federal government, various U.S. states, and various other jurisdictions throughout the world and certain tax returns may remain open to examination for several years. The results of audits and examinations of previously filed tax returns and continuing assessments of our tax exposures may have an adverse effect on our provision for income taxes and cash tax liability. The foregoing items could have a material adverse effect on our business, results of operations, or financial condition.

A change in tax laws in key jurisdictions could materially increase our tax expense.

We are subject to income taxes in the United States and many foreign jurisdictions. Changes to income tax laws and regulations, or the interpretation of such laws, in any of the jurisdictions in which we operate could significantly increase our effective tax rate and ultimately reduce our cash flows from operating activities and otherwise have a material adverse effect on our financial condition. For example, our effective tax rate increased from 1.2% for 2018 to 9.8% for 2019 primarily as a result of the Tax Cuts and Jobs Act enacted in December 2017 by the United States. Additionally, various levels of government are increasingly focused on tax reform and other legislative actions to increase tax revenue. The current administration has various proposals that would increase U.S. federal income taxes on corporations. Further changes in the tax laws of foreign jurisdictions could arise as a result of the base erosion and profit shifting project undertaken by the Organisation for Economic Co-operation and Development, which represents a coalition of member countries and recommended changes to numerous long-standing tax principles. If implemented by taxing authorities, such changes, as well as changes in U.S. federal and state tax laws or in taxing jurisdictions’ administrative interpretations, decisions, policies, and positions, could have a material adverse effect on our business, results of operations, or financial condition.

We and others are subject to a variety of laws, regulations, or industry standards, including with respect to climate change, that may have a material adverse effect on our business, results of operations, or financial condition.

The manufacturing of our products requires the use of facilities, equipment, and materials that are subject to a broad array of laws and regulations in numerous jurisdictions in which we operate. Additionally, we are subject to a variety of other laws and regulations relative to the construction, maintenance, and operations of our facilities. Any changes in laws, regulations, or industry standards could cause us to incur additional direct costs, as well as increased indirect costs related to our relationships with our customers and suppliers, and otherwise harm our operations and financial condition. Any failure to comply with laws, regulations, or industry standards could adversely impact our reputation and our financial results. Additionally, we engage various third parties as sales channel partners or to represent us or otherwise act on our behalf who are also subject to a broad array of laws, regulations, and industry standards. Our engagement with these third parties may also expose us to risks associated with their respective compliance with laws and regulations.

Climate change concerns and the potential resulting environmental impact may result in new environmental, health, and safety laws and regulations that may affect us, our suppliers, and our customers. Such laws or regulations could cause us to incur additional direct costs for compliance, as well as increased indirect costs resulting from our customers, suppliers, or both incurring additional compliance costs that are passed on to us. These costs may adversely impact our results of operations and financial condition. In addition, climate change may pose physical risks to our manufacturing facilities or our suppliers’ facilities, including increased extreme weather events that could result in supply delays or disruptions.

As a result of the items detailed in this risk factor, we could experience the following:

•suspension of production or sales of our products;

•remediation costs;

•alteration of our manufacturing processes;

•regulatory penalties, fines, and legal liabilities; and

•reputational challenges.

Compliance with, or our failure, or the failure of our third-party sales channel partners or agents, to comply with, laws, regulations, or industry standards could have a material adverse effect on our business, results of operations, or financial condition.

Risks Related to Capitalization and Financial Markets

We may be unable to generate sufficient cash flows or obtain access to external financing necessary to fund our operations, make scheduled debt payments, and make adequate capital investments.

Our cash flows from operations depend primarily on the volume of semiconductor memory and storage products sold, average selling prices, and manufacturing costs. To develop new product and process technology, support future growth, achieve operating efficiencies, and maintain product quality, we must make significant capital investments in manufacturing technology, capital equipment, facilities, R&D, and product and process technology.

We estimate capital expenditures in 2021 for property, plant, and equipment, net of partner contributions, will be somewhat above $9.5 billion, focused on technology transitions and product enablement. Investments in capital expenditures may not generate expected returns or cash flows. Delays in completion and ramping of new production facilities could significantly impact our ability to realize expected returns on our capital expenditures, which could have a material adverse effect on our business, results of operations, or financial condition.

In the past we have utilized external sources of financing when needed. As a result of our debt levels, expected debt amortization, and general economic conditions, it may be difficult for us to obtain financing on terms acceptable to us or at all. We have experienced volatility in our cash flows and operating results and may continue to experience such volatility in the future, which may negatively affect our credit rating. Our credit rating may also be affected by our liquidity, financial results, economic risk, or other factors, which may increase the cost of future borrowings and make it difficult for us to obtain financing on terms acceptable to us or at all. There can be no assurance that we will

54 | 2021 Q3 10-Q

be able to generate sufficient cash flows, access capital or credit markets, or find other sources of financing to fund our operations, make debt payments, and make adequate capital investments to remain competitive in terms of technology development and cost efficiency. Our inability to do any of the foregoing could have a material adverse effect on our business, results of operations, or financial condition.

Debt obligations could adversely affect our financial condition.

We have incurred in the past, and expect to incur in the future, debt to finance our capital investments, business acquisitions, and to restructure our capital structure, including the refinancing of existing debt. As of June 3, 2021:

•we had debt with a carrying value of $6.72 billion;

•$2.50 billion of our Revolving Credit Facility was available to us; and

•the conversion value in excess of principal of our convertible notes was $938 million (based on the trading price of our common stock of $82.03 per share on June 3, 2021) and substantially all remaining notes have been converted and will be settled in the fourth quarter of 2021 with cash for the $130 million principal amount and primarily shares for amounts above principal based on volume-weighted-average prices of our shares for a period of 20 trading days after conversion.

Our debt obligations could adversely impact us. For example, these obligations could:

•require us to use a large portion of our cash flow to pay principal and interest on debt, which will reduce the amount of cash flow available to fund working capital, capital expenditures, acquisitions, R&D expenditures, and other business activities;

•result in certain of our debt instruments being accelerated to be immediately due and payable or being deemed to be in default if certain terms of default are triggered, such as applicable cross payment default and/or cross-acceleration provisions;

•adversely impact our credit rating, which could increase future borrowing costs;

•limit our future ability to raise funds for capital expenditures, strategic acquisitions or business opportunities, R&D, and other general corporate requirements;

•restrict our ability to incur specified indebtedness, create or incur certain liens, and enter into sale-leaseback financing transactions;

•increase our vulnerability to adverse economic and semiconductor memory and storage industry conditions;

•increase our exposure to interest rate risk from variable rate indebtedness; and

•dilute our earnings per share as a result of the conversion provisions in our convertible notes.

Our ability to meet our payment obligations under our debt instruments depends on our ability to generate significant cash flows or obtain external financing in the future. This, to some extent, is subject to market, economic, financial, competitive, legislative, and regulatory factors as well as other factors that are beyond our control. There can be no assurance that our business will generate cash flow from operations, or that additional capital will be available to us, in amounts sufficient to enable us to meet our debt payment obligations and to fund other liquidity needs. Additionally, events and circumstances may occur which would cause us to not be able to satisfy applicable draw-down conditions and utilize our Revolving Credit Facility. If we are unable to generate sufficient cash flows to service our debt payment obligations, we may need to refinance or restructure our debt, sell assets, reduce or delay capital investments, or seek to raise additional capital. If we are unable to implement one or more of these alternatives, we may be unable to meet our debt payment obligations, which could have a material adverse effect on our business, results of operations, or financial condition.

Changes in foreign currency exchange rates could materially adversely affect our business, results of operations, or financial condition.

Across our global operations, significant transactions and balances are denominated in currencies other than the U.S. dollar (our reporting currency), primarily the euro, Singapore dollar, New Taiwan dollar, and yen. In addition, a significant portion of our manufacturing costs are denominated in foreign currencies. Exchange rates for some of these currencies against the U.S. dollar have been volatile and may be volatile in future periods. If these currencies strengthen against the U.S. dollar, our manufacturing costs could significantly increase. Exchange rates for the U.S. dollar that adversely change against our foreign currency exposures could have a material adverse effect on our business, results of operations, or financial condition.

We are subject to counterparty default risks.

We have numerous arrangements with financial institutions that subject us to counterparty default risks, including cash deposits, investments, and derivative instruments. Additionally, we are subject to counterparty default risk from our customers for amounts receivable from them. As a result, we are subject to the risk that the counterparty will default on its performance obligations. A counterparty may not comply with its contractual commitments which could then lead to its defaulting on its obligations with little or no notice to us, which could limit our ability to mitigate our exposure. Additionally, our ability to mitigate our exposures may be constrained by the terms of our contractual arrangements or because market conditions prevent us from taking effective action. If one of our counterparties becomes insolvent or files for bankruptcy, our ability to recover any losses suffered as a result of that counterparty’s default may be limited by the liquidity of the counterparty or the applicable laws governing the bankruptcy proceedings. In the event of such default, we could incur significant losses, which could have a material adverse effect on our business, results of operations, or financial condition.

The trading price of our common stock has been and may continue to be volatile.

Our common stock has experienced substantial price volatility in the past and may continue to do so in the future. Additionally, we, the technology industry, and the stock market as a whole have on occasion experienced extreme stock price and volume fluctuations that have affected stock prices in ways that may have been unrelated to the specific operating performance of individual companies. The trading price of our common stock may fluctuate widely due to various factors, including, but not limited to, actual or anticipated fluctuations in our financial condition and operating results, changes in financial estimates by us or financial estimates and ratings by securities analysts, changes in our capital structure, including issuance of additional debt or equity to the public, interest rate changes, regulatory changes, news regarding our products or products of our competitors, and broad market and industry fluctuations. For these reasons, investors should not rely on recent or historical trends to predict future trading prices of our common stock, financial condition, results of operations, or cash flows. Investors in our common stock may not realize any return on their investment in us and may lose some or all of their investment. Volatility in the trading price of our common stock could also result in the filing of securities class action litigation matters, which could result in substantial costs and the diversion of management time and resources.

The amount and frequency of our share repurchases may fluctuate, and we cannot guarantee that we will fully consummate our share repurchase authorization, or that it will enhance long-term shareholder value. Share repurchases could also increase the volatility of the trading price of our stock and will diminish our cash reserves.

The amount, timing, and execution of our share repurchases pursuant to our share repurchase authorization may fluctuate based on our operating results, cash flows, and priorities for the use of cash for other purposes. For example, we repurchased 66.4 million shares for $2.66 billion in 2019, 3.6 million shares for $176 million in 2020, and 1.7 million shares for $150 million in the first nine months of 2021. These other purposes include, but are not limited to, operational spending, capital spending, acquisitions, and repayment of debt. Other factors, including changes in tax laws, could also impact our share repurchases. Although our Board of Directors has authorized share repurchases of up to $10 billion of our outstanding common stock, the authorization does not obligate us to repurchase any common stock.

We cannot guarantee that our share repurchase authorization will be fully consummated or that it will enhance long-term shareholder value. The repurchase authorization could affect the trading price of our stock and increase volatility, and any announcement of a pause in, or termination of, this program may result in a decrease in the trading price of our stock. In addition, this program will diminish our cash reserves.

56 | 2021 Q3 10-Q

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

In May 2018, we announced that our Board of Directors authorized the discretionary repurchase of up to $10 billion of our outstanding common stock through open-market purchases, block trades, privately-negotiated transactions, derivative transactions, and/or pursuant to Rule 10b5-1 trading plans. The repurchase authorization has no expiration date, does not obligate us to acquire any common stock, and is subject to market conditions and our ongoing determination of the best use of available cash.


Period			Total number of shares purchased	Average price paid per share		Total number of shares purchased as part of publicly announced plans or programs	Maximum number (or approximate dollar value) of shares that may yet be purchased under publicly announced plans or programs

March 5, 2021	–	April 8, 2021	195,967	$	90.18	195,967
April 9, 2021	–	May 6, 2021	906,068	89.05		906,068
May 7, 2021	–	June 3, 2021	637,772	80.99		637,772
			1,739,807	$	86.23	1,739,807	$	7,012,266,321

Shares of common stock withheld as payment of withholding taxes and exercise prices in connection with the vesting or exercise of equity awards are also treated as common stock repurchases. Those withheld shares of common stock are not required to be disclosed under Item 703 of Regulation S-K and accordingly are excluded from the amounts in the table above.

ITEM 6. EXHIBITS

Exhibit Number

Description of Exhibit

Filed Herewith

Form

Period Ending

Exhibit/ Appendix

Filing Date

10.22

Credit Agreement, dated as of May 14, 2021, by and among Micron Technology, Inc., as borrower, HSBC Bank USA, National Association, as administrative agent, the other agents party thereto, and each financial institution party from time to time thereto

10.23

Term Loan Credit Agreement, dated as of May 14, 2021, by and among Micron Technology, Inc., as borrower, Wells Fargo Bank, National Association, as administrative agent, the other agents party thereto, and each financial institution party from time to time thereto

31.1

Rule 13a-14(a) Certification of Chief Executive Officer

31.2

Rule 13a-14(a) Certification of Chief Financial Officer

32.1

Certification of Chief Executive Officer Pursuant to 18 U.S.C. 1350

32.2

Certification of Chief Financial Officer Pursuant to 18 U.S.C. 1350

101.INS

Inline XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document

101.SCH

Inline XBRL Taxonomy Extension Schema Document

101.CAL

Inline XBRL Taxonomy Extension Calculation Linkbase Document

101.DEF

Inline XBRL Taxonomy Extension Definition Linkbase Document

101.LAB

Inline XBRL Taxonomy Extension Label Linkbase Document

101.PRE

Inline XBRL Taxonomy Extension Presentation Linkbase Document

104

Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)

58 | 2021 Q3 10-Q

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.


			Micron Technology, Inc.
			(Registrant)


Date:	July 1, 2021	By:	/s/ David A. Zinsner
			David A. Zinsner
			Senior Vice President and Chief Financial Officer
			(Principal Financial Officer)

			/s/ Scott Allen
			Scott Allen
			Corporate Vice President and Chief Accounting Officer
			(Principal Accounting Officer)