MRC GLOBAL INC. - Annual Report: 2012 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

FOR THE FISCAL YEAR ENDED DECEMBER 31, 2012

or

FOR THE TRANSITION PERIOD FROM              TO             

Commission file number: 001-35479

MRC Global Inc.

(Exact name of registrant as specified in its charter)

(877) 294-7574

(Registrant’s Telephone Number, including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  x    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

The Company’s common stock is listed on the New York Stock Exchange under the symbol “MRC”. The aggregate market value of voting common stock held by non-affiliates was $975 million as of the close of trading as reported on the New York Stock Exchange on June 29, 2012. There were 101,563,237 shares of the registrant’s common stock, par value $0.01 per share, issued and outstanding as of December 31, 2012.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s proxy statement relating to the 2013 Annual Meeting of Shareholders, to be filed within 120 days of the end of the fiscal year covered by this report, are incorporated by reference into Part III of this Annual Report on Form 10-K.

Table of Contents

TABLE OF CONTENTS

Table of Contents

PART I

Unless otherwise indicated or the context otherwise requires, all references to “our Company”, “MRC Global”, “MRC”, “we”, “us”, “our”, and the “registrant” refer to MRC Global Inc. and its consolidated subsidiaries.

General

We are the largest global industrial distributor of pipe, valves and fittings (“PVF”) and related products and services to the energy industry based on sales and hold a leading position in our industry across each of the upstream (exploration, production and extraction of underground oil and natural gas), midstream (gathering and transmission of oil and natural gas, natural gas utilities and the storage and distribution of oil and natural gas) and downstream (crude oil refining, petrochemical processing and general industrials) sectors. We offer more than 175,000 SKUs, including an extensive array of PVF, oilfield supply, automation, instrumentation and other general and specialty industry supply products from our over 18,000 suppliers. We operate in three segments consisting of our U.S., Canadian, and International operations. Through our U.S., Canadian and International segments, we serve our more than 18,000 customers through over 400 service locations throughout North America, Europe, Asia and Australasia. We are diversified by geography, the industry sectors we serve and the products we sell.

Our PVF and oilfield supplies are used in mission critical process applications that require us to provide a high degree of product knowledge, technical expertise and comprehensive value added services to our customers. We seek to provide best-in-class service and a one-stop shop for our customers by satisfying the most complex, multi-site needs of many of the largest companies in the energy and industrial sectors as their primary PVF supplier. We provide services such as product testing, manufacturer assessments, multiple daily deliveries, volume purchasing, inventory and zone store management and warehousing, technical support, just-in-time delivery, truck stocking, order consolidation, product tagging and system interfaces customized to customer and supplier specifications for tracking and replenishing inventory, which we believe result in deeply integrated customer relationships. We believe the critical role we play in our customers’ supply chain, together with our extensive product offering, broad global presence, customer-linked scalable information systems and efficient distribution capabilities, serve to solidify our long-standing customer relationships and drive our growth. As a result, we have an average relationship of over 20 years with our largest 25 customers.

We have benefited historically from several growth trends within the energy industry, including high levels of customer expansion and maintenance expenditures. Although these trends were offset in 2009 and 2010 due to adverse economic conditions, we believe that growth in PVF and industrial supply spending within the energy industry is likely to continue. Several factors have driven the long-term growth in spending, including underinvestment in North American energy infrastructure, production and capacity constraints, and market expectations of future improvements in the oil, natural gas, refined products, petrochemical and other industrial sectors. In addition, the products we distribute are often used in extreme operating environments, leading to the need for a regular replacement cycle. Approximately 70% of our sales are attributable to multi-year maintenance, repair and operations (“MRO”) arrangements. Our average annual retention rate for these contracts since 2000 is 95%. We consider MRO arrangements to be normal, generally repetitive business that primarily addresses the recurring maintenance, repair or operational work to existing energy infrastructure. Project activities, including facility expansions, exploration or new construction projects, are more commonly associated with a customer’s capital expenditures budget. Such projects can be more sensitive to global oil and natural gas prices and general economic conditions. We mitigate our exposure to price volatility by limiting the length of any price-protected contracts, and as pricing continues to rebound, we believe that we have the ability to pass price increases on to the marketplace.

MRC Global Inc. was incorporated in Delaware on November 20, 2006. Our principal executive office is located at 2 Houston Center, 909 Fannin, Suite 3100, Houston, Texas 77010. Our telephone number is (877) 294-7574. Our website address is www.mrcglobal.com. Information contained on our website is expressly not incorporated by reference into this document.

1

Table of Contents

Business Strategy

Our goal is to grow our market position as an industrial distributor of PVF and related products to the energy industry. Our strategy is focused on pursuing growth by increasing market share and growing our business with current customers, expanding into new geographies and sectors, increasing recurring revenues through integrated supply and MRO business, capturing additional high growth project activity, continuing to increase our operational efficiency and making and integrating strategic acquisitions. We seek to extend our current MRO contracts and bundle certain products, most notably pipe, fittings, flanges and other products (“PFF”), into our International segment’s existing customer base and branch network. We also seek to opportunistically add other products and new suppliers, including alloy, chrome, stainless products, gaskets, seals, safety and other industrial supply products, into our existing North American platform. We will also look at future complementary distribution acquisitions that would supplement our PVF leadership position, and we will look at future “bolt-on” acquisitions that broaden our geographic footprint, increase international focus, or expand our product offering to our major customers.

Operations

Our business is segregated into three geographical operating segments, our U.S. operations, our Canadian operations and our International operations. These segments are substantially similar, particularly within North America, and represent our business of providing PVF and related products and services to the energy and industrial industries, across each of the upstream, midstream and downstream sectors. Financial information regarding our reportable segments appears in “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in Note 13 of the Notes to the Consolidated Financial Statements included in Item 8 of this Form 10-K. We have recast segment operating results for 2011 and 2010 to conform to certain organizational realignments in 2012.

Our U.S. segment represented approximately 76% of our consolidated revenues in 2012. We maintain distribution operations throughout the country with concentrations in the most active oil and natural gas regions. Our network is comprised of over 150 branch locations, 8 distribution centers, 12 valve automation service centers and over 95 third-party pipe yards.

Our Canadian segment represented approximately 14% of our consolidated revenues in 2012. Our distribution operations expand throughout the western part of Canada with concentrations in Alberta and western Saskatchewan. In Canada, we have over 40 branch locations, one distribution center and over 25 third-party pipe yards.

Our International segment represented approximately 10% of our consolidated revenues in 2012. This segment includes over 50 branch locations located throughout Europe, Asia and Australasia with four distribution centers in each of the United Kingdom, Singapore, the Netherlands and Australia. We also maintain 12 valve automation service centers in Europe, Asia and Australia as well as 10 pipe yards in Australia and the United Kingdom.

Products: We distribute a complete line of PVF products, primarily used in specialized applications in the energy infrastructure sector. The products we distribute are used in the construction, maintenance, repair and overhaul of equipment used in extreme operating conditions such as high pressure, high/low temperature, high corrosive and abrasive environments. We are required to carry significant amounts of inventory to meet the rapid delivery, often same day, requirements of our customers. The breadth and depth of our product offerings and our extensive global presence allow us to provide high levels of service to our customers. Due to our broad inventory coverage, we are able to fulfill more orders more quickly, including those with lower volume and specialty items, than we would be able to if we operated on a smaller scale or only at a local or regional level. Key product types are described below:

2

Table of Contents

Services: We provide many of our customers with a comprehensive array of services including multiple deliveries each day, zone store management, valve tagging and significant system interfaces that directly tie the customer into our proprietary information systems. This allows us to interface with our customers’ IT systems and provide an integrated supply service. Such services strengthen our position with our customers as we become more integrated into the customer’s business and supply chain and are able to market a “total transaction value” solution rather than individual product prices.

Our comprehensive information systems, which provide for customer and supplier electronic integrations, information sharing and e-commerce applications, further strengthen our ability to provide high levels of service to our customers. In 2012, we processed over 1.6 million electronic data interface (“EDI”) customer transactions. Our highly specialized implementation group focuses on the integration of our information systems and implementation of improved business processes with those of a new customer during the initiation phase. By maintaining a specialized team, we are able to utilize best practices to implement our systems and processes, thereby providing solutions to customers in a more organized, efficient and effective manner. This approach is valuable to large, multi-location customers who have demanding service requirements.

As major integrated and large independent energy companies have implemented efficiency initiatives to focus on their core business, many of these companies have begun outsourcing certain of their procurement and inventory management requirements. In response to these initiatives and to satisfy customer service requirements, we offer integrated supply services to customers who wish to outsource all or a part of the administrative burden associated with sourcing PVF and other related products, and we also often have MRC employees on-site full-time at many customer locations. Our integrated supply group offers procurement-related services, physical warehousing services, product quality assurance and inventory ownership and analysis services.

3

Table of Contents

Suppliers: We source the products we distribute from a global network of suppliers in 35 countries. Our suppliers benefit from access to our diversified customer base and, by consolidating customer orders, we benefit from stronger purchasing power and preferred vendor programs. Our purchases from our 25 largest suppliers in 2012 approximated 45% of our total purchases, with our single largest supplier constituting approximately 7%. We are the largest customer for many of our suppliers, and we source a significant majority of the products we distribute directly from the manufacturer. The remainder of the products we distribute are sourced from manufacturer representatives, trading companies and, in some instances, other distributors.

We believe our customers and suppliers recognize us as an industry leader in part due to the quality of products we supply and for the formal processes we use to evaluate vendor performance. This vendor assessment process is referred to as the MRC Supplier Registration Process, which involves employing individuals, certified by the International Registry of Certificated Auditors, who specialize in conducting on-site assessments of our manufacturers as well as monitoring and evaluating the quality of goods produced. The result of this process is the MRC approved manufacturer’s listing (“AML”). Products from the manufacturers on this list are supplied across many of the industries we support. Given that many of our largest customers, especially those in our downstream sector, maintain their own formal AML listing, we are recognized as an important source of information sharing with our key customers regarding the results of our on-site assessment. For this reason, together with our commitment to promote high quality products that bring the best overall value to our customers, we often become the preferred provider of AML products to these customers. Many of our customers regularly collaborate with us regarding specific manufacturer performance, our own experience with vendors’ products and the results of our on-site manufacturer assessments. The emphasis placed on the MRC AML by both our customers and suppliers helps secure our central and critical position in the global PVF supply chain.

We utilize a variety of freight carriers in addition to our corporate truck fleet to ensure timely and efficient delivery of our products. With respect to deliveries of products from us to our customers, or our outbound needs, we utilize both our corporate fleet and third-party transportation providers. We utilize third parties for approximately 22% of our outbound deliveries. With respect to shipments of products from suppliers to us, or our inbound needs, we principally use third-party carriers.

Sales and Marketing: We distribute our products to a wide variety of end-users and have direct sales into 44 countries around the world. Our broad distribution network and customer base allow us to capitalize on our extensive inventory offering. Local relationships, depth of inventory, service and timely delivery are critical to the sales process in the PVF distribution industry. Our sales efforts are customer and product driven and provide a system that is more responsive to changing customer and product needs than a traditional, fully centralized structure.

Our sales model applies a two-pronged approach to address both regional and national markets. Regional sales teams are based in our core geographic regions and are complemented by a global accounts sales team organized by sector or product expertise and focused on large regional, national or global customers. These sales teams are then supported by groups with additional specific service or product expertise, including integrated supply and implementation. Our overall sales force is then internally divided into outside and inside sales forces.

Our approximately 400 (as of December 31, 2012) account managers and outside sales representatives develop relationships with prospective and existing customers in an effort to better understand their needs and to increase the number of our products specified or approved by a given customer. Outside sales representatives may be branch outside sales representatives, focused on customer relationships in specific geographies, or technical outside sales representatives, who focus on specific products and provide detailed technical support to customers. Internationally, for valve sales, the majority of our sales force are qualified engineers who are able to meet complex customer requirements, select optimal solutions from a range of products to increase customers’ efficiency and lower total product lifecycle costs.

To address the needs of our customer base, our inside sales force of approximately 950 customer service representatives (as of December 31, 2012) is responsible for processing orders generated by new and existing customers as well as by our outside sales force. The customer service representatives develop order packages

4

Table of Contents

based on specific customer needs, interface with manufacturers to determine product availability, ensure on-time delivery and establish pricing of materials and services based on guidelines and predetermined metrics that management establishes.

Seasonality: Our business experiences mild seasonal effects as demand for the products we distribute is generally higher during the months of August, September and October. Demand for the products we distribute during the months of November and December and early in the year generally tends to be lower due to a lower level of activity near the end of the calendar year in the industry sectors we serve and due to winter weather disruptions. In addition, certain exploration and production (“E&P”) activities, primarily in Canada, typically experience a springtime reduction due to seasonal thaws and regulatory restrictions, limiting the ability of drilling rigs to operate effectively during these periods.

Customers: Our principal customers are companies active in the upstream, midstream and downstream sectors of the energy industry as well as in other industrial and energy sectors. Due to the demanding operating conditions in the energy industry, high costs and safety risks associated with equipment failure, customers prefer highly reliable products and vendors with established qualifications, reputation and experience. As our PVF products typically are mission critical and represent a fraction of the total cost of a given project, our customers often place a premium on service and high reliability given the high cost to them of maintenance or new project delays. We strive to build long-term relationships with our customers by maintaining our reputation as a supplier of high-quality, efficient and reliable products and value-added services and solutions.

We have a diverse customer base of over 18,000 active customers. We are not dependent on any one customer or group of customers. A majority of our customers are offered terms of net 30 days (payment is due within 30 days of the date of the invoice). Customers generally have the right to return products we have sold, subject to certain conditions and limitations, although returns have historically been immaterial to our sales. For the years ended December 31, 2012 and 2011, our 25 largest customers represented approximately half of our total sales. For many of our largest customers, we are often their sole or primary PVF provider by sector or geography, their largest or second largest supplier in aggregate or, in certain instances, the sole provider for their upstream, midstream and downstream procurement needs. We believe that many customers for which we are not the exclusive or comprehensive U.S. sole source PVF provider will continue to reduce their number of suppliers in an effort to reduce costs and administrative burdens and focus on their core operations. As such, we believe these customers will seek to select PVF distributors with the most extensive product offering and broadest geographic presence. Furthermore, we believe our business will benefit as companies in the energy industry continue to consolidate and the larger, resulting companies look to larger distributors such as ourselves as their sole or primary source PVF provider.

Backlog: Backlog is determined by the amount of unshipped third-party customer orders, which may be revised or cancelled by the customer in certain instances. Backlog is generally attributable to our project contract activity, as we generally supply products for MRO contracts within a short period of time from order. There can be no assurance that the backlog amounts will be ultimately realized as revenue, or that the Company will earn a profit on the backlog of orders. Our backlog at December 31, 2012 was $664 million including $455 million, $62 million and $147 million in our US, Canadian and International segments, respectively. Our backlog at December 31, 2011 was $817 million including $631 million, $60 million and $126 million in our US, Canadian and International segments, respectively. The reduction in the U.S. 2012 backlog is primarily from repositioning the Company away from certain OCTG drilling programs.

Competition: We are the largest PVF distributor to the energy industry based on sales. The broad PVF distribution industry is fragmented and includes large, nationally recognized distributors, major regional distributors and many smaller local distributors. The principal methods of competition include offering prompt local service, fulfillment capability, breadth of product and service offerings, price and total costs to the customer. Our competitors include nationally recognized PVF distributors, such as National Oilwell Varco, Inc. and Ferguson Enterprises (a subsidiary of Wolseley, plc), several large regional or product-specific competitors and many local, family-owned PVF distributors.

5

Table of Contents

Employees: As of December 31, 2012, we had approximately 4,780 employees of which 80 employees belong to a union and are covered by collective bargaining agreements. We also had 30 employees in Australia that are not members of a union but are covered by union negotiated agreements. We consider our relationships with our employees to be good.

For a breakdown of our annual revenues by geography, see “Note 13—Segment, Geographic and Product Line Information” to the audited consolidated financial statements as of December 31, 2012.

Environmental Matters

We are subject to a variety of federal, state, local, foreign and provincial environmental, health and safety laws, regulations and permitting requirements, including those governing the discharge of pollutants or hazardous substances into the air, soil or water, the generation, handling, use, management, storage and disposal of, or exposure to, hazardous substances and wastes, the responsibility to investigate, remediate, monitor and clean up contamination and occupational health and safety. Fines and penalties may be imposed for non-compliance with applicable environmental, health and safety requirements and the failure to have or to comply with the terms and conditions of required permits. Historically, the costs to comply with environmental and health and safety requirements have not been material to our financial position, results of operations or cash flows. We are not aware of any pending environmental compliance or remediation matters that, in the opinion of management, are reasonably likely to have a material effect on our business, financial position or results of operations or cash flows. However, the failure by us to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, employee, neighbor or other third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders requiring corrective measures, including the installation of pollution control equipment or remedial actions.

Under certain laws and regulations, such as the U.S. federal Superfund law or its foreign equivalents, the obligation to investigate, remediate, monitor and clean up contamination at a facility may be imposed on current and former owners, lessees or operators or on persons who may have sent waste to that facility for disposal. Liability under these laws and regulations may be imposed without regard to fault or to the legality of the activities giving rise to the contamination. Although we are not aware of any active litigation against us under the U.S. federal Superfund law or its state or foreign equivalents, contamination has been identified at several of our current and former facilities, and we have incurred and will continue to incur costs to investigate, remediate, monitor and clean up these conditions. Moreover, we may incur liabilities in connection with environmental conditions currently unknown to us relating to our prior, existing or future owned or leased sites or operations or those of predecessor companies whose liabilities we may have assumed or acquired. We believe that indemnities contained in certain of our acquisition agreements may cover certain environmental conditions existing at the time of the acquisition subject to certain terms, limitations and conditions. However, if these indemnification provisions terminate or if the indemnifying parties do not fulfill their indemnification obligations, we may be subject to liability with respect to the environmental matters that those indemnification provisions address.

In addition, environmental, health and safety laws and regulations applicable to our business and the business of our customers, including laws regulating the energy industry, and the interpretation or enforcement of these laws and regulations, are constantly evolving and it is impossible to predict accurately the effect that changes in these laws and regulations, or their interpretation or enforcement, may have upon our business, financial condition or results of operations. Should environmental laws and regulations, or their interpretation or enforcement, become more stringent, our costs, or the costs of our customers, could increase, which may have a material adverse effect on our business, financial position, results of operations or cash flows.

In particular, legislation and regulations limiting emissions of greenhouse gases, including carbon dioxide associated with the burning of fossil fuels, are at various stages of consideration and implementation at the international, national, regional and state levels. In 2005, the Kyoto Protocol to the 1992 United Nations Framework Convention on Climate Change, which established a binding set of emission targets for greenhouse

6

Table of Contents

gases, became binding on the countries that ratified it. Attention is now focused on development of a post-2012 international policy framework to guide international action to address climate change when the Kyoto Protocol expired in 2012. Certain states and regions have adopted or are considering legislation or regulation imposing overall caps or taxes on greenhouse gas emissions from certain sectors or facility categories or mandating the increased use of electricity from renewable energy sources. Similar legislation has been proposed at the federal level. In addition, the EPA has implemented regulations that require permits for and reductions in greenhouse gas emissions for certain categories of facilities, the most recent of which became effective in August 2012. Pursuant to the terms of a settlement agreement, the EPA is in the process of finalizing greenhouse gas emissions standards, known as New Source Performance Standards (“NSPS”), for new power plants and plans to issue NSPS for greenhouse gas emissions for oil refineries in the future. NSPS for other oil refinery emissions were issued by the EPA pursuant to the settlement agreement in September 2012 and became effective in November 2012. The settlement agreement also calls for NSPS for greenhouse gas emissions from existing power plants; however, the EPA has not proposed such NSPS to date. These laws and regulations could negatively impact the market for the products we distribute and, consequently, our business.

In addition, federal, state, local, foreign and provincial laws, regulations and permitting requirements have been adopted or are being considered that could impose more stringent permitting, disclosure, wastewater and other waste disposal and well construction and testing requirements on hydraulic fracturing, a practice involving the injection of water containing certain other substances into rock formations (after perforating the formation with explosive charges) to stimulate production of hydrocarbons, particularly natural gas, from shale basin regions. Other states and the federal government are considering regulating this practice. These regulations include a variety of well construction, set back, wastewater disposal, emissions, baseline sampling, operational and disclosure requirements limiting how fracturing can be performed and requiring various degrees of disclosures regarding the contents of chemicals injected into the rock formations, as well as moratoria on all hydraulic fracturing activity. Any increased federal, regional or state regulation of hydraulic fracturing could reduce the demand for our products in these regions.

Exchange Rate Information

In this report, unless otherwise indicated, foreign currency amounts are converted into U.S. dollar amounts at the exchange rates in effect on December 31, 2012 and 2011 for balance sheet figures. Income statement figures are converted on a monthly basis, using each month’s average conversion rate.

Available Information

Our website is located at www.mrcglobal.com. We make available free of charge on or through our internet website our annual report on Form 10-K, our quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC.

7

Table of Contents

1A.    RISK FACTORS

You should carefully consider the following risk factors as well as the other information contained in this Annual Report on Form 10-K. If one or more of these risks or uncertainties actually occurs, they could materially and adversely affect our business, financial condition and operating results. In this Annual Report on Form 10-K, unless the context expressly requires a different reading, when we state that a factor could “adversely affect us”, have a “material adverse effect”, “adversely affect our business” and similar expressions, we mean that the factor could materially and adversely affect our business, financial condition and operating results and cash flows. Information contained in this section may be considered “forward-looking statements”. See “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Cautionary Note Regarding Forward-Looking Statements” below for a discussion of certain qualifications regarding such statements.

Risks Related to Our Business

Decreased capital and other expenditures in the energy industry, which can result from decreased oil and natural gas prices, among other things, can adversely impact our customers’ demand for our products and our revenue.

A large portion of our revenue depends upon the level of capital and operating expenditures in the oil and natural gas industry, including capital and other expenditures in connection with exploration, drilling, production, gathering, transportation, refining and processing operations. Demand for the products we distribute and services we provide is particularly sensitive to the level of exploration, development and production activity of, and the corresponding capital and other expenditures by, oil and natural gas companies. A material decline in oil or natural gas prices could depress levels of exploration, development and production activity and, therefore, could lead to a decrease in our customers’ capital and other expenditures. If our customers’ expenditures decline, our business will suffer.

Volatile oil and gas prices affect demand for our products.

Prices for oil and natural gas are subject to large fluctuations in response to relatively minor changes in the supply of and demand for oil and natural gas, market uncertainty and a variety of other factors that are beyond our control. Any sustained decrease in capital expenditures in the oil and natural gas industry could have a material adverse effect on us.

Many factors affect the supply of and demand for energy and, therefore, influence oil and natural gas prices, including:

8

Table of Contents

Oil and natural gas prices have been and are expected to remain volatile. This volatility has historically caused oil and natural gas companies to change their strategies and expenditure levels from year to year. We have experienced in the past, and we will likely experience in the future, significant fluctuations in operating results based on these changes. In particular, volatility in the oil and natural gas sectors could adversely affect our business.

General economic conditions may adversely affect our business.

U.S. and global general economic conditions affect many aspects of our business, including demand for the products we distribute and the pricing and availability of supplies. General economic conditions and predictions regarding future economic conditions also affect our forecasts. A decrease in demand for the products we distribute or other adverse effects resulting from an economic downturn may cause us to fail to achieve our anticipated financial results. General economic factors beyond our control that affect our business and customers include interest rates, recession, inflation, deflation, customer credit availability, consumer credit availability, consumer debt levels, performance of housing markets, energy costs, tax rates and policy, unemployment rates, commencement or escalation of war or hostilities, the threat or possibility of war, terrorism or other global or national unrest, political or financial instability, and other matters that influence our customers’ spending. Increasing volatility in financial markets may cause these factors to change with a greater degree of frequency or increase in magnitude. In addition, worldwide economic conditions, including those associated with the current European sovereign debt crisis, could have an adverse effect on our business, prospects, operating results, financial condition, and cash flows going forward. Continued adverse economic conditions would have an adverse effect on us.

We may be unable to compete successfully with other companies in our industry.

We sell products and services in very competitive markets. In some cases, we compete with large companies with substantial resources. In other cases, we compete with smaller regional players that may increasingly be willing to provide similar products and services at lower prices. Competitive actions, such as price reductions, consolidation in the industry, improved delivery and other actions, could adversely affect our revenue and

9

Table of Contents

earnings. We could experience a material adverse effect to the extent that our competitors are successful in reducing our customers’ purchases of products and services from us. Competition could also cause us to lower our prices, which could reduce our margins and profitability. Furthermore, consolidation in our industry could heighten the impacts of the competition on our business and results of operations discussed above, particularly if consolidation results in competitors with stronger financial and strategic resources, and could also result in increases to the prices we are required to pay for acquisitions we may make in the future.

Demand for the products we distribute could decrease if the manufacturers of those products were to sell a substantial amount of goods directly to end users in the sectors we serve.

Historically, users of PVF and related products have purchased certain amounts of these products through distributors and not directly from manufacturers. If customers were to purchase the products that we sell directly from manufacturers, or if manufacturers sought to increase their efforts to sell directly to end users, we could experience a significant decrease in profitability. These or other developments that remove us from, or limit our role in, the distribution chain, may harm our competitive position in the marketplace and reduce our sales and earnings and adversely affect our business.

We may experience unexpected supply shortages.

We distribute products from a wide variety of manufacturers and suppliers. Nevertheless, in the future we may have difficulty obtaining the products we need from suppliers and manufacturers as a result of unexpected demand or production difficulties that might extend lead times. Also, products may not be available to us in quantities sufficient to meet our customer demand. Our inability to obtain products from suppliers and manufacturers in sufficient quantities, or at all, could adversely affect our product offerings and our business.

We may experience cost increases from suppliers, which we may be unable to pass on to our customers.

In the future, we may face supply cost increases due to, among other things, unexpected increases in demand for supplies, decreases in production of supplies or increases in the cost of raw materials or transportation. Any inability to pass supply price increases on to our customers could have a material adverse effect on us. For example, we may be unable to pass increased supply costs on to our customers because significant amounts of our sales are derived from stocking program arrangements, contracts and MRO arrangements, which provide our customers time limited price protection, which may obligate us to sell products at a set price for a specific period. In addition, if supply costs increase, our customers may elect to purchase smaller amounts of products or may purchase products from other distributors. While we may be able to work with our customers to reduce the effects of unforeseen price increases because of our relationships with them, we may not be able to reduce the effects of the cost increases. In addition, to the extent that competition leads to reduced purchases of products or services from us or a reduction of our prices, and these reductions occur concurrently with increases in the prices for selected commodities which we use in our operations, including steel, nickel and molybdenum, the adverse effects described above would likely be exacerbated and could result in a prolonged downturn in profitability.

We do not have contracts with most of our suppliers. The loss of a significant supplier would require us to rely more heavily on our other existing suppliers or to develop relationships with new suppliers. Such a loss may have an adverse effect on our product offerings and our business.

Given the nature of our business, and consistent with industry practice, we do not have contracts with most of our suppliers. We generally make our purchases through purchase orders. Therefore, most of our suppliers have the ability to terminate their relationships with us at any time. Approximately 45% of our total purchases during the year ended December 31, 2012 were from our 25 largest suppliers. Although we believe there are numerous manufacturers with the capacity to supply the products we distribute, the loss of one or more of our major suppliers could have an adverse effect on our product offerings and our business. Such a loss would require us to rely more heavily on our other existing suppliers or develop relationships with new suppliers, which may cause us to pay higher prices for products due to, among other things, a loss of volume discount benefits currently obtained from our major suppliers.

10

Table of Contents

Price reductions by suppliers of products that we sell could cause the value of our inventory to decline. Also, these price reductions could cause our customers to demand lower sales prices for these products, possibly decreasing our margins and profitability on sales to the extent that we purchased our inventory of these products at the higher prices prior to supplier price reductions.

The value of our inventory could decline as a result of manufacturer price reductions with respect to products that we sell. There is no assurance that a substantial decline in product prices would not result in a write-down of our inventory value. Such a write-down could have an adverse effect on our financial condition.

Also, decreases in the market prices of products that we sell could cause customers to demand lower sales prices from us. These price reductions could reduce our margins and profitability on sales with respect to the lower-priced products. Reductions in our margins and profitability on sales could have a material adverse effect on us.

A substantial decrease in the price of steel could significantly lower our gross profit or cash flow.

We distribute many products manufactured from steel. As a result, the price and supply of steel can affect our business and, in particular, our tubular product category. When steel prices are lower, the prices that we charge customers for products may decline, which affects our gross profit and cash flow. At times pricing and availability of steel can be volatile due to numerous factors beyond our control, including general domestic and international economic conditions, labor costs, sales levels, competition, consolidation of steel producers, fluctuations in and the costs of raw materials necessary to produce steel, steel manufacturers’ plant utilization levels and capacities, import duties and tariffs and currency exchange rates. Increases in manufacturing capacity for the tubular products could put pressure on the prices we receive for our tubular products. When steel prices decline, customer demands for lower prices and our competitors’ responses to those demands could result in lower sales prices and, consequently, lower gross profit and cash flow.

If steel prices rise, we may be unable to pass along the cost increases to our customers.

We maintain inventories of steel products to accommodate the lead time requirements of our customers. Accordingly, we purchase steel products in an effort to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers based upon historic buying practices, contracts with customers and market conditions. Our commitments to purchase steel products are generally at prevailing market prices in effect at the time we place our orders. If steel prices increase between the time we order steel products and the time of delivery of the products to us, our suppliers may impose surcharges that require us to pay for increases in steel prices during the period. Demand for the products we distribute, the actions of our competitors and other factors will influence whether we will be able to pass on steel cost increases and surcharges to our customers, and we may be unsuccessful in doing so.

We do not have long-term contracts or agreements with many of our customers. The contracts and agreements that we do have generally do not commit our customers to any minimum purchase volume. The loss of a significant customer may have a material adverse effect on us.

Given the nature of our business, and consistent with industry practice, we do not have long-term contracts with many of our customers. In addition, our contracts, including our MRO contracts, generally do not commit our customers to any minimum purchase volume. Therefore, a significant number of our customers, including our MRO customers, may terminate their relationships with us or reduce their purchasing volume at any time. Furthermore, the long-term customer contracts that we do have are generally terminable without cause on short notice. Our 25 largest customers represented approximately half of our sales for the year ended December 31, 2012. The products that we may sell to any particular customer depend in large part on the size of that customer’s capital expenditure budget in a particular year and on the results of competitive bids for major projects. Consequently, a customer that accounts for a significant portion of our sales in one fiscal year may represent an immaterial portion of our sales in subsequent fiscal years. The loss of a significant customer, or a substantial decrease in a significant customer’s orders, may have an adverse effect on our sales and revenue.

11

Table of Contents

In addition, we are subject to customer audit clauses in many of our multi-year contracts. If we are not able to provide the proper documentation or support for invoices per the contract terms, we may be subject to negotiated settlements with our major customers.

Changes in our customer and product mix could cause our gross profit percentage to fluctuate.

From time to time, we may experience changes in our customer mix or in our product mix. Changes in our customer mix may result from geographic expansion, daily selling activities within current geographic markets and targeted selling activities to new customer segments. Changes in our product mix may result from marketing activities to existing customers and needs communicated to us from existing and prospective customers. If customers begin to require more lower-margin products from us and fewer higher-margin products, our business, results of operations and financial condition may suffer.

Customer credit risks could result in losses.

The concentration of our customers in the energy industry may impact our overall exposure to credit risk as customers may be similarly affected by prolonged changes in economic and industry conditions. Further, laws in some jurisdictions in which we operate could make collection difficult or time consuming. We perform ongoing credit evaluations of our customers and do not generally require collateral in support of our trade receivables. While we maintain reserves for expected credit losses, we cannot assure these reserves will be sufficient to meet write-offs of uncollectible receivables or that our losses from such receivables will be consistent with our expectations.

We may be unable to successfully execute or effectively integrate acquisitions.

One of our key operating strategies is to selectively pursue acquisitions, including large scale acquisitions, to continue to grow and increase profitability. However, acquisitions, particularly of a significant scale, involve numerous risks and uncertainties, including intense competition for suitable acquisition targets, the potential unavailability of financial resources necessary to consummate acquisitions in the future, increased leverage due to additional debt financing that may be required to complete an acquisition, dilution of our stockholders’ net current book value per share if we issue additional equity securities to finance an acquisition, difficulties in identifying suitable acquisition targets or in completing any transactions identified on sufficiently favorable terms, assumption of undisclosed or unknown liabilities and the need to obtain regulatory or other governmental approvals that may be necessary to complete acquisitions. In addition, any future acquisitions may entail significant transaction costs and risks associated with entry into new markets.

Even when acquisitions are completed, integration of acquired entities can involve significant difficulties, such as:

Failure to manage these acquisition growth risks could have an adverse effect on us.

12

Table of Contents

Our significant indebtedness may affect our ability to operate our business, and this could have a material adverse effect on us.

We have now and will likely continue to have a significant amount of indebtedness. As of December 31, 2012, we had total debt outstanding of $1,256.6 million, borrowing availability of $429.6 million under our credit facilities and total liquidity (borrowing capacity plus cash on hand) of $466.7 million. We may incur significant additional indebtedness in the future. If new indebtedness is added to our current indebtedness, the risks described below could increase. Our significant level of indebtedness could have important consequences, such as:

In addition, borrowings under our credit facilities bear interest at variable rates. If market interest rates increase, the variable-rate debt will create higher debt service requirements, which could adversely affect our cash flow. Our interest expense for the year ended December 31, 2012 was $112.5 million.

Our ability to make scheduled debt payments, to refinance our obligations with respect to our indebtedness and to fund capital and non-capital expenditures necessary to maintain the condition of our operating assets, properties and systems software, as well as to provide capacity for the growth of our business, depends on our financial and operating performance, which, in turn, is subject to prevailing economic conditions and financial, business, competitive, legal and other factors. Our business may not generate sufficient cash flow from operations, and future borrowings may not be available to us under our credit facilities in an amount sufficient to enable us to pay our indebtedness or to fund our other liquidity needs. We may seek to sell assets to fund our liquidity needs but may not be able to do so. We may also need to refinance all or a portion of our indebtedness on or before maturity. We may not be able to refinance any of our indebtedness on commercially reasonable terms or at all.

In addition, we are and will be subject to covenants contained in agreements governing our present and future indebtedness. These covenants include and will likely include restrictions on:

13

Table of Contents

In addition, any defaults under our credit facilities, including our global asset-based lending facility (“Global ABL Facility”) and our $650 million term loan (“Term Loan”) or our other debt could trigger cross defaults under other or future credit agreements and may permit acceleration of our other indebtedness. If our indebtedness is accelerated, we cannot be certain that we will have sufficient funds available to pay the accelerated indebtedness or that we will have the ability to refinance the accelerated indebtedness on terms favorable to us or at all. For a description of our credit facilities and indebtedness, see “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources”.

We are a holding company and depend upon our subsidiaries for our cash flow.

We are a holding company. Our subsidiaries conduct all of our operations and own substantially all of our assets. Consequently, our cash flow and our ability to meet our obligations or to pay dividends or make other distributions in the future will depend upon the cash flow of our subsidiaries and our subsidiaries’ payment of funds to us in the form of dividends, tax sharing payments or otherwise. In addition, McJunkin Red Man Corporation, our direct subsidiary and the primary obligor under our Global ABL Facility and our Term Loan, is also dependent to a significant extent on the cash flow of its subsidiaries to meet its debt service obligations.

The ability of our subsidiaries to make any payments to us will depend on their earnings, the terms of their current and future indebtedness, tax considerations and legal and contractual restrictions on the ability to make distributions. In particular, our subsidiaries’ credit facilities currently impose significant limitations on the ability of our subsidiaries to make distributions to us and consequently our ability to pay dividends to our stockholders. Subject to limitations in our credit facilities, our subsidiaries may also enter into additional agreements that contain covenants prohibiting them from distributing or advancing funds or transferring assets to us under certain circumstances, including to pay dividends.

Our subsidiaries are separate and distinct legal entities. Any right that we have to receive any assets of or distributions from any of our subsidiaries upon the bankruptcy, dissolution, liquidation or reorganization, or to realize proceeds from the sale of their assets, will be junior to the claims of that subsidiary’s creditors, including trade creditors and holders of debt that the subsidiary issued.

Changes in our credit profile may affect our relationship with our suppliers, which could have a material adverse effect on our liquidity.

Changes in our credit profile may affect the way our suppliers view our ability to make payments and may induce them to shorten the payment terms of their invoices, particularly given our high level of outstanding indebtedness. Given the large dollar amounts and volume of our purchases from suppliers, a change in payment terms may have a material adverse effect on our liquidity and our ability to make payments to our suppliers and, consequently, may have a material adverse effect on us.

If tariffs and duties on imports into the U.S. of line pipe, OCTG or certain of the other products that we sell are lifted, we could have too many of these products in inventory competing against less expensive imports.

U.S. law currently imposes tariffs and duties on imports from certain foreign countries of line pipe and OCTG and, to a lesser extent, on imports of certain other products that we sell. If these tariffs and duties are lifted or reduced or if the level of these imported products otherwise increases, and our U.S. customers accept these imported products, we could be materially and adversely affected to the extent that we would then have higher-cost products in our inventory or increased supplies of these products drive down prices and margins. If prices of these products were to decrease significantly, we might not be able to profitably sell these products, and the value of our inventory would decline. In addition, significant price decreases could result in a significantly longer holding period for some of our inventory.

14

Table of Contents

We are subject to strict environmental, health and safety laws and regulations that may lead to significant liabilities and negatively impact the demand for our products.

We are subject to a variety of federal, state, local, foreign and provincial environmental, health and safety laws; regulations and permitting requirements, including those governing the discharge of pollutants or hazardous substances into the air, soil or water, the generation, handling, use, management, storage and disposal of, or exposure to, hazardous substances and wastes, the responsibility to investigate and clean up contamination and occupational health and safety. Regulations and courts may impose fines and penalties for non-compliance with applicable environmental, health and safety requirements and the failure to have or to comply with the terms and conditions of required permits. Our failure to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup or regulatory or judicial orders requiring corrective measures, including the installation of pollution control equipment or remedial actions.

Certain laws and regulations, such as the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA” or the “U.S. federal Superfund law”) or its state and foreign equivalents, may impose the obligation to investigate and remediate contamination at a facility on current and former owners or operators or on persons who may have sent waste to that facility for disposal. These laws and regulations may impose liability without regard to fault or to the legality of the activities giving rise to the contamination. Although we are not aware of any active litigation against us under the U.S. federal Superfund law or its state or foreign equivalents, contamination has been identified at several of our current and former facilities, and we have incurred and will continue to incur costs to investigate and remediate these conditions.

Moreover, we may incur liabilities in connection with environmental conditions currently unknown to us relating to our existing, prior or future owned or leased sites or operations or those of predecessor companies whose liabilities we may have assumed or acquired. We believe that indemnities contained in certain of our acquisition agreements may cover certain environmental conditions existing at the time of the acquisition, subject to certain terms, limitations and conditions. However, if these indemnification provisions terminate or if the indemnifying parties do not fulfill their indemnification obligations, we may be subject to liability with respect to the environmental matters that those indemnification provisions address.

In addition, environmental, health and safety laws and regulations applicable to our business and the business of our customers, including laws regulating the energy industry, and the interpretation or enforcement of these laws and regulations, are constantly evolving. It is impossible to predict accurately the effect that changes in these laws and regulations, or their interpretation or enforcement, may have on us. Should environmental laws and regulations, or their interpretation or enforcement, become more stringent, our costs, or the costs of our customers, could increase, which may have a material adverse effect on us.

In particular, legislation and regulations limiting emissions of greenhouse gases, including carbon dioxide associated with the burning of fossil fuels, are at various stages of consideration and implementation, at the international, national, regional and state levels. In 2005, the Kyoto Protocol to the 1992 United Nations Framework Convention on Climate Change, which established a binding set of emission targets for greenhouse gases, became binding on the countries that ratified it. Attention is now focused on the development of a post-2012 international policy framework to guide international action to address climate change when the Kyoto Protocol expired in 2012. Certain states and regions have adopted or are considering legislation or regulation imposing overall caps or taxes on greenhouse gas emissions from certain sectors or facility categories or mandating the increased use of electricity from renewable energy sources. Similar legislation has been proposed at the federal level. In addition, the U.S. Environmental Protection Agency (the “EPA”) has implemented regulations that require permits for and reductions in greenhouse gas emissions for certain categories of facilities, the most recent of which became effective in August 2012. Pursuant to the terms of a settlement agreement, the EPA is in the process of finalizing greenhouse gas emissions standards, known as NSPS, for new power plants and plans to issue NSPS for greenhouse gas emissions for oil refineries in the future. NSPS for other oil refinery

15

Table of Contents

emissions were issued by the EPA pursuant to the settlement agreement in September 2012 and became effective in November 2012. The settlement agreement also calls for NSPS for greenhouse gas emissions from existing power plants; however, the EPA has not proposed such NSPS to date. These laws and regulations could negatively impact the market for the products we distribute and, consequently, our business.

In addition, federal, state, local, foreign and provincial laws, regulations and permitting requirements have been adopted or are being considered that could impose more stringent permitting, disclosure, wastewater disposal and well construction requirements on hydraulic fracturing, a practice involving the injection of water containing certain other substances into rock formations (after perforating the formation with explosive charges) to stimulate production of hydrocarbons, particularly natural gas, from shale basin regions. These effective and potential regulations include a variety of well construction, set back, wastewater disposal, emissions, baseline sampling, operational and disclosure requirements limiting how fracturing can be performed and requiring various degrees of disclosures regarding the contents of chemicals injected into the rock formations, as well as moratoria on all hydraulic fracturing activity. Any increased federal, regional or state regulation of hydraulic fracturing could significantly reduce the demand for our products in the high-growth shale regions of the U.S.

We may not have adequate insurance for potential liabilities, including liabilities arising from litigation.

In the ordinary course of business, we have and in the future may become the subject of various claims, lawsuits and administrative proceedings seeking damages or other remedies concerning our commercial operations, the products we distribute, employees and other matters, including potential claims by individuals alleging exposure to hazardous materials as a result of the products we distribute or our operations. Some of these claims may relate to the activities of businesses that we have acquired, even though these activities may have occurred prior to our acquisition of the businesses. The products we distribute are sold primarily for use in the energy industry, which is subject to inherent risks that could result in death, personal injury, property damage, pollution, release of hazardous substances or loss of production. In addition, defects in the products we distribute could result in death, personal injury, property damage, pollution, release of hazardous substances or damage to equipment and facilities. Actual or claimed defects in the products we distribute may give rise to claims against us for losses and expose us to claims for damages.

We maintain insurance to cover certain of our potential losses, and we are subject to various self-retentions, deductibles and caps under our insurance. It is possible, however, that judgments could be rendered against us in cases in which we would be uninsured and beyond the amounts that we currently have reserved or anticipate incurring for these matters. Even a partially uninsured claim, if successful and of significant size, could have a material adverse effect on us. Furthermore, we may not be able to continue to obtain insurance on commercially reasonable terms in the future, and we may incur losses from interruption of our business that exceed our insurance coverage. Finally, even in cases where we maintain insurance coverage, our insurers may raise various objections and exceptions to coverage that could make uncertain the timing and amount of any possible insurance recovery.

Due to our position as a distributor, we are subject to personal injury, product liability and environmental claims involving allegedly defective products.

Our customers use certain of the products we distribute in potentially hazardous applications that can result in personal injury, product liability and environmental claims. A catastrophic occurrence at a location where end users use the products we distribute may result in us being named as a defendant in lawsuits asserting potentially large claims, even though we did not manufacture the products. Applicable law may render us liable for damages without regard to negligence or fault. In particular, certain environmental laws provide for joint and several and strict liability for remediation of spills and releases of hazardous substances. Certain of these risks are reduced by the fact that we are a distributor of products that third-party manufacturers produce, and, thus, in certain circumstances, we may have third-party warranty or other claims against the manufacturer of products alleged to have been defective. However, there is no assurance that these claims could fully protect us or that the manufacturer would be able financially to provide protection. There is no assurance that our insurance coverage will be adequate to cover the underlying claims. Our insurance does not provide coverage for all liabilities (including liability for certain events involving pollution or other environmental claims).

16

Table of Contents

We are a defendant in asbestos-related lawsuits. Exposure to these and any future lawsuits could have a material adverse effect on us.

We are a defendant in lawsuits involving approximately 885 claims, arising from exposure to asbestos-containing materials included in products that we distributed in the past. Each claim involves allegations of exposure to asbestos-containing materials by a single individual, his or her spouse or family members. The complaints in these lawsuits typically name many other defendants. In the majority of these lawsuits, little or no information is known regarding the nature of the plaintiffs’ alleged injuries or their connection with the products we distributed. Based on our experience with asbestos litigation to date, as well as the existence of certain insurance coverage, we do not believe that the outcome of these pending claims will have a material impact on us. However, the potential liability associated with asbestos claims is subject to many uncertainties, including negative trends with respect to settlement payments, dismissal rates and the types of medical conditions alleged in pending or future claims, negative developments in the claims pending against us, the current or future insolvency of co-defendants, adverse changes in relevant laws or the interpretation of those laws and the extent to which insurance will be available to pay for defense costs, judgments or settlements. Further, while we anticipate that additional claims will be filed against us in the future, we are unable to predict with any certainty the number, timing and magnitude of future claims. Therefore, we can give no assurance that pending or future asbestos litigation will not ultimately have a material adverse effect on us. See “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Contractual Obligations, Commitments and Contingencies—Legal Proceedings” and “Item 3—Legal Proceedings” for more information.

If we lose any of our key personnel, we may be unable to effectively manage our business or continue our growth.

Our future performance depends to a significant degree upon the continued contributions of our management team and our ability to attract, hire, train and retain qualified managerial, sales and marketing personnel. In particular, we rely on our sales and marketing teams to create innovative ways to generate demand for the products we distribute. The loss or unavailability to us of any member of our management team or a key sales or marketing employee could have a material adverse effect on us to the extent we are unable to timely find adequate replacements. We face competition for these professionals from our competitors, our customers and other companies operating in our industry. We may be unsuccessful in attracting, hiring, training and retaining qualified personnel.

Interruptions in the proper functioning of our information systems could disrupt operations and cause increases in costs or decreases in revenues.

The proper functioning of our information systems is critical to the successful operation of our business. We depend on our information management systems to process orders, track credit risk, manage inventory and monitor accounts receivable collections. Our information systems also allow us to efficiently purchase products from our vendors and ship products to our customers on a timely basis, maintain cost-effective operations and provide superior service to our customers. However, our information systems are vulnerable to natural disasters, power losses, telecommunication failures and other problems. If critical information systems fail or are otherwise unavailable, our ability to procure products to sell, process and ship customer orders, identify business opportunities, maintain proper levels of inventories, collect accounts receivable and pay accounts payable and expenses could be adversely affected. Our ability to integrate our systems with our customers’ systems would also be significantly affected. We maintain information systems controls designed to protect against, among other things, unauthorized program changes and unauthorized access to data on our information systems. If our information systems controls do not function properly, we face increased risks of unexpected errors and unreliable financial data or theft of proprietary Company information.

17

Table of Contents

The loss of third-party transportation providers upon whom we depend, or conditions negatively affecting the transportation industry, could increase our costs or cause a disruption in our operations.

We depend upon third-party transportation providers for delivery of products to our customers. Strikes, slowdowns, transportation disruptions or other conditions in the transportation industry, including, but not limited to, shortages of truck drivers, disruptions in rail service, increases in fuel prices and adverse weather conditions, could increase our costs and disrupt our operations and our ability to service our customers on a timely basis. We cannot predict whether or to what extent increases or anticipated increases in fuel prices may impact our costs or cause a disruption in our operations going forward.

We may need additional capital in the future, and it may not be available on acceptable terms, or at all.

We may require more capital in the future to:

We can give no assurance that additional financing will be available on terms favorable to us, or at all. The terms of available financing may place limits on our financial and operating flexibility. If adequate funds are not available on acceptable terms, we may be forced to reduce our operations or delay, limit or abandon expansion opportunities. Moreover, even if we are able to continue our operations, the failure to obtain additional financing could reduce our competitiveness.

Adverse weather events or natural disasters could negatively affect our local economies or disrupt our operations.

Certain areas in which we operate are susceptible to adverse weather conditions or natural disasters, such as hurricanes, tornadoes, floods and earthquakes. These events can disrupt our operations, result in damage to our properties and negatively affect the local economies in which we operate. Additionally, we may experience communication disruptions with our customers, vendors and employees. These events can cause physical damage to our branches and require us to close branches. Additionally, our sales order backlog and shipments can experience a temporary decline immediately following these events.

We cannot predict whether or to what extent damage caused by these events will affect our operations or the economies in regions where we operate. These adverse events could result in disruption of our purchasing or distribution capabilities, interruption of our business that exceeds our insurance coverage, our inability to collect from customers and increased operating costs. Our business or results of operations may be adversely affected by these and other negative effects of these events.

We have a substantial amount of goodwill and other intangible assets recorded on our balance sheet, partly because of acquisitions and business combination transactions. The amortization of acquired intangible assets will reduce our future reported earnings. Furthermore, if our goodwill or other intangible assets become impaired, we may be required to recognize charges that would reduce our income.

As of December 31, 2012, we had $1.4 billion of goodwill and other intangibles recorded on our balance sheet. A substantial portion of these intangible assets results from our use of purchase accounting in connection with the acquisitions we have made over the past several years. In accordance with the purchase accounting method, the excess of the cost of an acquisition over the fair value of identifiable tangible and intangible assets is assigned to

18

Table of Contents

goodwill. The amortization expense associated with our identifiable intangible assets will have a negative effect on our future reported earnings. Many other companies, including many of our competitors, may not have the significant acquired intangible assets that we have because they may not have participated in recent acquisitions and business combination transactions similar to ours. Thus, the amortization of identifiable intangible assets may not negatively affect their reported earnings to the same degree as ours.

Additionally, under generally accepted accounting principles, goodwill and certain other long lived intangible assets are not amortized, but must be reviewed for possible impairment annually, or more often in certain circumstances where events indicate that the asset values are not recoverable. These reviews could result in an earnings charge for impairment, which would reduce our net income even though there would be no impact on our underlying cash flow.

We face risks associated with conducting business in markets outside of North America.

We currently conduct substantial business in countries outside of North America. In addition, we are evaluating the possibility of establishing distribution networks in certain other foreign countries, particularly in Europe, Asia, the Middle East and South America. We could be materially and adversely affected by economic, legal, political and regulatory developments in the countries in which we do business in the future or in which we expand our business, particularly those countries which have historically experienced a high degree of political or economic instability. Examples of risks inherent in such non-North American activities include:

If we begin doing business in a foreign country in which we do not presently operate, we may also face difficulties in operations and diversion of management time in connection with establishing our business there.

We are subject to U.S. and other anti-corruption laws, trade controls, economic sanctions, and similar laws and regulations, including those in the jurisdictions where we operate. Our failure to comply with these laws and regulations could subject us to civil, criminal and administrative penalties and harm our reputation.

Doing business on a worldwide basis requires us to comply with the laws and regulations of the U.S. government and various foreign jurisdictions. These laws and regulations place restrictions on our operations, trade practices, partners and investment decisions. In particular, our operations are subject to U.S. and foreign anti-corruption and trade control laws and regulations, such as the Foreign Corrupt Practices Act (“FCPA”), export controls and economic sanctions programs, including those administered by the U.S. Treasury Department’s Office of Foreign Assets Control (“OFAC”). As a result of doing business in foreign countries and with foreign partners, we are exposed to a heightened risk of violating anti-corruption and trade control laws and sanctions regulations.

19

Table of Contents

The FCPA prohibits us from providing anything of value to foreign officials for the purposes of obtaining or retaining business or securing any improper business advantage. It also requires us to keep books and records that accurately and fairly reflect the Company’s transactions. As part of our business, we may deal with state-owned business enterprises, the employees of which are considered foreign officials for purposes of the FCPA. In addition, the United Kingdom Bribery Act (the “Bribery Act”) has been enacted and came into effect on July 1, 2011. The provisions of the Bribery Act extend beyond bribery of foreign public officials and also apply to transactions with individuals that a government does not employ. The provisions of the Bribery Act are also more onerous than the FCPA in a number of other respects, including jurisdiction, non-exemption of facilitation payments and penalties. Some of the international locations in which we operate lack a developed legal system and have higher than normal levels of corruption. Our continued expansion outside the U.S., including in developing countries, and our development of new partnerships and joint venture relationships worldwide, could increase the risk of FCPA, OFAC or Bribery Act violations in the future.

Economic sanctions programs restrict our business dealings with certain sanctioned countries, persons and entities. In addition, because we act as a distributor, we face the risk that our customers might further distribute our products to a sanctioned person or entity, or an ultimate end-user in a sanctioned country, which might subject us to an investigation concerning compliance with OFAC or other sanctions regulations.

Violations of anti-corruption and trade control laws and sanctions regulations are punishable by civil penalties, including fines, denial of export privileges, injunctions, asset seizures, debarment from government contracts and revocations or restrictions of licenses, as well as criminal fines and imprisonment. We have established policies and procedures designed to assist our compliance with applicable U.S. and international anti-corruption and trade control laws and regulations, including the FCPA, the Bribery Act and trade controls and sanctions programs administered by OFAC, and have trained our employees to comply with these laws and regulations. However, there can be no assurance that all of our employees, consultants, agents or other associated persons will not take actions in violation of our policies and these laws and regulations, and that our policies and procedures will effectively prevent us from violating these regulations in every transaction in which we may engage or provide a defense to any alleged violation. In particular, we may be held liable for the actions that our local, strategic or joint venture partners take inside or outside of the United States, even though our partners may not be subject to these laws. Such a violation, even if our policies prohibit it, could have a material adverse effect on our reputation, business, financial condition and results of operations. In addition, various state and municipal governments, universities and other investors maintain prohibitions or restrictions on investments in companies that do business with sanctioned countries, persons and entities, which could adversely affect the market for our common stock and other securities.

We face risks associated with international instability and geopolitical developments.

In some countries, there is an increased chance for economic, legal or political changes that may adversely affect the performance of our services, sale of our products or repatriation of our profits. We do not know the impact that these regulatory, geopolitical and other factors may have on our business in the future and any of these factors could adversely affect us.

We are exposed to risks relating to evaluations of controls required by Section 404 of the Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”).

Section 404 of the Sarbanes-Oxley Act requires us to annually evaluate our internal controls systems to allow management to report on, and our independent auditors to audit, our internal controls over financial reporting. This is not a static process as we change our processes each year or acquire new companies that have different controls than our controls. Upon completion of this process each year, we may identify control deficiencies of varying degrees of severity under applicable U.S. Securities and Exchange Commission (“SEC”) and Public Company Accounting Oversight Board (“PCAOB”) rules and regulations that remain unremediated. We are required to report, among other things, control deficiencies that constitute a “material weakness” or changes in internal controls that, or that are reasonably likely to, materially affect internal controls over financial reporting.

20

Table of Contents

A “material weakness” is a significant deficiency or combination of significant deficiencies in internal control over financial reporting that results in a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis.

We could suffer a loss of confidence in the reliability of our financial statements if our independent registered public accounting firm reports a material weakness in our internal controls, if we do not develop and maintain effective controls and procedures or if we are otherwise unable to deliver timely and reliable financial information. Any loss of confidence in the reliability of our financial statements or other negative reaction to our failure to develop timely or adequate disclosure controls and procedures or internal controls could result in a decline in the price of our common stock. In addition, if we fail to remedy any material weakness, our financial statements may be inaccurate, we may face restricted access to the capital markets and our stock price may be adversely affected.

We are a “controlled company” within the meaning of the NYSE rules and, as a result, will qualify for, and may rely on, exemptions from certain corporate governance requirements.

A company of which more than 50% of the voting power is held by an individual, a group or another company is a “controlled company” within the meaning of the NYSE rules and may elect not to comply with certain corporate governance requirements of the NYSE, including:

We rely on all of the exemptions listed above. Accordingly, our stockholders do not have the same protections afforded to stockholders of companies that are subject to all of the corporate governance requirements of the NYSE.

The SEC’s move toward a single set of international accounting standards could materially impact our results of operations.

The SEC continues to move forward with a convergence to a single set of international accounting standards (such as International Financial Reporting Standards (“IFRS”)). The associated changes in regulatory accounting may negatively impact the way we record revenues, expenses, assets and liabilities. Currently, under IFRS, the last in, first out (“LIFO”) method of valuing inventory is not permitted. If we had ceased valuing our inventory under the LIFO method at December 31, 2012, we would have been required to make tax payments approximating $134.8 million over the subsequent four years.

Certain funds affiliated with The Goldman Sachs Group, Inc. (the “Goldman Sachs Funds”) control us and may have conflicts of interest with our other stockholders. Conflicts of interest may arise because affiliates of our principal stockholder have continuing agreements and business relationships with us.

As of December 31, 2012, the Goldman Sachs Funds control 54.7% of our outstanding common stock. As a result, the Goldman Sachs Funds control the election of our directors, determine our corporate and management policies and determine, without the consent of our other stockholders, the outcome of any corporate transaction or other matter submitted to our stockholders for approval, including potential mergers or acquisitions, asset sales and other significant corporate transactions. The Goldman Sachs Funds also have sufficient voting power to amend our organizational documents.

21

Table of Contents

Conflicts of interest may arise between our principal stockholder and us. Affiliates of our principal stockholder engage in transactions with our Company. One affiliate of our principal stockholder, Goldman Sachs Lending Partners LLC, is the co-documentation agent and a managing agent for our Global ABL Facility. See “Item 13—Certain Relationships and Related Transactions, and Director Independence”. Further, the Goldman Sachs Funds are in the business of making investments in companies and may, from time to time, acquire and hold interests in businesses that compete directly or indirectly with us, and they may either directly, or through affiliates, also maintain business relationships with companies that may directly compete with us. In general, the Goldman Sachs Funds or their affiliates could pursue business interests or exercise their voting power as stockholders in ways that are detrimental to us but beneficial to themselves or to other companies in which they invest or with whom they have a material relationship. Conflicts of interest could also arise with respect to business opportunities that could be advantageous to the Goldman Sachs Funds and they may pursue acquisition opportunities that may be complementary to our business. As a result, those acquisition opportunities may not be available to us. Under the terms of our certificate of incorporation, the Goldman Sachs Funds have no obligation to offer us corporate opportunities.

As a result of these relationships, the interests of the Goldman Sachs Funds may not coincide with the interests of our Company or other holders of our common stock. So long as the Goldman Sachs Funds continue to control a significant amount of the outstanding shares of our common stock, the Goldman Sachs Funds will continue to be able to strongly influence or effectively control our decisions, including potential mergers or acquisitions, asset sales and other significant corporate transactions. See “Item 13—Certain Relationships and Related Transactions, and Director Independence”.

We do not currently intend to pay dividends in the foreseeable future.

It is uncertain when, if ever, we will declare dividends to our stockholders. We do not currently intend to pay dividends in the foreseeable future. Our ability to pay dividends is constrained by our holding company structure under which we are dependent on our subsidiaries for payments. Additionally, we and our subsidiaries are parties to credit agreements which restrict our ability and their ability to pay dividends. See “Item 5—Market for the Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities” and “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources”.

The occurrence of cyber incidents, or a deficiency in our cybersecurity, could negatively impact our business by causing a disruption to our operations, a compromise or corruption of our confidential information or damage to our Company’s image, all of which could negatively impact our financial results.

A cyber incident is considered to be any adverse event that threatens the confidentiality, integrity or availability of our information resources. More specifically, a cyber incident is an intentional attack or an unintentional event that can include gaining unauthorized access to systems to disrupt operations, corrupt data or steal confidential information. As our reliance on technology has increased, so have the risks posed to our systems, both internal and those we have outsourced. Our three primary risks that could directly result from the occurrence of a cyber incident include operational interruption, damage to our Company’s image, and private data exposure. We have implemented solutions, processes, and procedures to help mitigate this risk, but these measures, as well as our organization’s increased awareness of our risk of a cyber incident, do not guarantee that our financial results will not be negatively impacted by such an incident.

Compliance with and changes in laws and regulations in the countries in which we operate could have a significant financial impact and effect how and where we conduct our operations.

We have operations in the U.S. and in over 15 countries that can be impacted by expected and unexpected changes in the business and legal environments in the countries in which we operate. Compliance with and changes in laws, regulations, and other legal and business issues could impact our ability to manage our costs and

22

Table of Contents

to meet our earnings goals. Compliance related matters could also limit our ability to do business in certain countries. Changes that could have a significant cost to us include new legislation, new regulations, or a differing interpretation of existing laws and regulations, changes in tax law or tax rates, the unfavorable resolution of tax assessments or audits by various taxing authorities, the expansion of currency exchange controls, export controls or additional restrictions on doing business in countries subject to sanctions in which we operate or intend to operate.

Not applicable.

In North America, we operate a modified hub and spoke model that is centered around our nine distribution centers in the U.S and Canada with more than 190 branch locations which have inventory and local employees. Our U.S. network is comprised of over 150 branch locations and 8 distribution centers. We own our Charleston, WV corporate office and our Nitro, WV and Houston, TX (Darien Street) distribution centers and lease the remaining six distribution centers. In Canada, we have over 40 branch locations and we own our one distribution center in Nisku, Alberta, Canada. We own less than 15% of our branch locations as we primarily lease the facilities.

Outside North America, we operate through a network of over 50 branch locations located throughout Europe, Asia, Australasia and the Middle East, including distribution centers in each of the United Kingdom, Singapore and Australia. We also maintain an operations center for our international operations in Bradford, United Kingdom and Perth, Australia. We own our Brussels, Belgium location and the remainder of our locations are leased.

Our company maintains its principal executive office at 2 Houston Center, 909 Fannin, Suite 3100, Houston, Texas, 77010 and also maintains corporate offices in Charleston, WV, and in Tulsa, OK. All three locations have corporate functions such as accounting, human resources, legal and information technology. We also maintain operations centers for our Canadian operations in Calgary, Alberta and for our international operations in Bradford, United Kingdom.

From time to time, we have been subject to various claims and involved in legal proceedings incidental to the nature of our businesses. We maintain insurance coverage to reduce financial risk associated with certain of these claims and proceedings. It is not possible to predict the outcome of these claims and proceedings. However, in our opinion, there are no material pending legal proceedings that upon resolution are likely to have a material effect on our business, financial condition, results of operations or cash flows.

Also, from time to time, in the ordinary course of our business, our customers may claim that the products that we distribute are either defective or require repair or replacement under warranties that either we or the manufacturer may provide to the customer. These proceedings are, in the opinion of management, ordinary and routine matters incidental to our normal business. Our purchase orders with our suppliers generally require the manufacturer to indemnify us against any product liability claims, leaving the manufacturer ultimately responsible for these claims. In many cases, state, provincial or foreign law provides protection to distributors for these sorts of claims, shifting the responsibility to the manufacturer. In some cases, we could be required to repair or replace the products for the benefit of our customer and seek our recovery from the manufacturer for our expense. In the opinion of management, the ultimate disposition of these claims and proceedings are not expected to have a material adverse effect on our financial position, results of operations or cash flows.

23

Table of Contents

For information regarding asbestos cases in which we are a defendant and other claims and proceedings, see “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Contractual Obligations, Commitments and Contingencies—Legal Proceedings” and “Note 15—Commitments and Contingencies” to our audited consolidated financial statements included elsewhere in this report.

Not applicable.

24

Table of Contents

EXECUTIVE OFFICERS OF THE REGISTRANT

The name, age, period of service and the title of each of our executive officers as of February 22, 2013 are listed below.

Andrew R. Lane has served as our president and chief executive officer (“CEO”) since September 2008 and our chairman of the Board since December 2009. He has also served as a director of MRC Global Inc. since September 2008. From December 2004 to December 2007, he served as executive vice president and chief operating officer of Halliburton Company, where he was responsible for Halliburton’s overall operational performance, managed over 50,000 employees worldwide and oversaw the integration of several mergers and acquisitions. Prior to that, he held a variety of leadership roles within Halliburton, serving as president and CEO of Kellogg Brown & Root, Inc. from July 2004 to November 2004, as senior vice president, global operations of Halliburton Energy Services Group from April 2004 to July 2004, as president of the Landmark Division of Halliburton Energy Services Group from May 2003 to March 2004, and as president and CEO of Landmark Graphics Corporation from April 2002 to April 2003. He was also chief operating officer of Landmark Graphics from January 2002 to March 2002 and vice president, production enhancement PSL, completion products PSL and tools/testing/TCP of Halliburton Energy Services Group from January 2000 to December 2001. Mr. Lane served as a director of KBR, Inc. from June 2006 to April 2007. He began his career in the oil and natural gas industry as a field engineer for Gulf Oil Corporation in 1982, and later worked as a production engineer in Gulf Oil’s Pipeline Design and Permits Group. Mr. Lane received a B.S. in mechanical engineering from Southern Methodist University in 1981 (cum laude). He also completed the Advanced Management Program (A.M.P.) at Harvard Business School in 2000. He is a member of the executive board of the Southern Methodist University School of Engineering. Mr. Lane is uniquely qualified to serve as one of our directors due to his extensive executive and leadership experience in the oil and natural gas industry and his deep knowledge of our operations.

James E. Braun has served as our executive vice president and chief financial officer since November 2011. Prior to joining the Company, Mr. Braun served as chief financial officer of Newpark Resources, Inc. since 2006. Newpark provides drilling fluids and other products and services to the oil and gas exploration and production industry, both inside and outside of the U.S. Before joining Newpark, Mr. Braun was chief financial officer of Baker Oil Tools, one of the largest divisions of Baker Hughes Incorporated, a leading provider of drilling, formation evaluation, completion and production products and services to the worldwide oil and gas industry. From 1998 until 2002, he was vice president, finance and administration, of Baker Petrolite, the oilfield specialty chemical business division of Baker Hughes. Previously, he served as vice president and controller of Baker Hughes. Mr. Braun is a CPA and was formerly a partner with Deloitte & Touche. Mr. Braun received a B.A. in accounting from the University of Illinois at Urbana-Champaign.

Daniel J. Churay has served as our executive vice president corporate affairs, general counsel and corporate secretary since May 2012. In his current role, Mr. Churay manages the company’s human resources, legal, risk and compliance and external and government affairs functions. He also acts as corporate secretary to the company’s board of directors. Prior to May 2012, Mr. Churay served as executive vice president and general counsel since August 2011 and as our corporate secretary since November 2011. From December 2010 to June 2011, he served as president and CEO of Rex Energy Corporation, an independent oil and gas company. From September 2002 to December 2010, Mr. Churay served as executive vice president, general counsel and secretary of YRC Worldwide Inc., a Fortune 500 transportation and logistics company, with primary responsibility for YRC Worldwide Inc.’s legal, risk, compliance and external affairs matters, including its internal audit function. During 2010, Mr. Churay also supervised YRC’s Chinese businesses. From 1995 to 2002, Mr. Churay served as the deputy general counsel and assistant secretary of Baker Hughes Incorporated, a Fortune 500 company that provides products and services to the petroleum and continuous process industries, where he was responsible for legal matters relating to acquisitions, divestitures, treasury matters and securities offerings. From 1989 to 1995, Mr. Churay was an attorney at the law firm of Fulbright and Jaworski LLP in Houston, Texas. He is a member of the American Bar Association, the State Bar of Texas and the Parent’s Council of Texas Christian University. He also serves on the board of directors of the Sam Houston Area Council of the Boy Scouts of America. Mr. Churay received a bachelor’s degree in economics from the University of Texas and a juris doctorate from the University of Houston Law Center, where he was a member of the Law Review.

25

Table of Contents

Gary A. Ittner has served as executive vice president of corporate strategy, mergers and acquisitions since September 2012. From September 2010 to May 2012, he served as our executive vice president of global supply chain management and as our chief administrative officer since. Prior to that, he served as our executive vice president—supply chain management from October 2008 to September 2010 after he had served as our senior corporate vice president of supply chain management from February 2007 to October 2008, having specific responsibility for the procurement of all industrial valves, automation, fittings and alloy tubular products. From March 2001 to November 2007, he served as our senior corporate vice president of supply chain management. Before joining the supply chain management group, Mr. Ittner worked in various field positions including branch manager, regional manager and senior regional vice president. He is a past chairman of the executive committee of the American Supply Association’s Industrial Piping Division. Mr. Ittner began working at MRC in 1971 following his freshman year at the University of Cincinnati and joined MRC full-time following his graduation in 1974.

Rory M. Isaac has served as executive vice president of corporate strategy, mergers and acquisitions since September 2012. Prior to this role, Mr. Isaac served as the executive vice president of global business development since December 2008. From 2007 to 2008, he served as our senior corporate vice president of sales (focusing on downstream, industrials and natural gas utilities operations) since November 2007. From 2000 to 2007 he served as our senior vice president of national accounts, utilities and marketing. From 1995 to 2000 he served as our senior vice president of national accounts. Mr. Isaac joined MRC in 1981. He has extensive experience in sales, customer relations and management, and has served at MRC as a branch manager, regional manager and regional vice president. In 1995 he began working in our corporate office in Charleston, West Virginia as senior vice president for national accounts where he was responsible for managing and growing our national accounts customer base and directing business development efforts into integrated supply markets. Prior to joining MRC, Mr. Isaac worked at Consolidated Services, Inc. and Charleston Supply Company. Mr. Isaac attended the Citadel.

James F. Underhill has served as our executive vice president and chief operating officer of U.S. operations since November 2012. His global responsibilities also include information technology and corporate shared services, including safety, quality, and marketing. Prior to his current role, he served as our executive vice president and chief operating officer – North America beginning in November 2011. He served as our executive vice president and chief financial officer from November 2007 through October 2011. He served as our chief financial officer from May 2006 through October 2007, as senior vice president of accounting and information services from 1994 to May 2006, and vice president and controller from 1987 to 1994. Prior to 1987, Mr. Underhill served as controller, assistant controller, and corporate accounting manager. Mr. Underhill joined us in 1980 and has since overseen our accounting, information systems and mergers and acquisitions areas. He has been involved in numerous implementations of electronic customer solutions and has had primary responsibility for the acquisition and integration of more than 30 businesses. Mr. Underhill was also project manager for the design, development, and implementation of our IT operating system. He received a B.A. in accounting and economics from Lehigh University in 1977 and is a certified public accountant. Prior to joining us, Mr. Underhill worked in the New York City office of the accounting firm of Main Hurdman (which was incorporated into the successor accounting firm, KPMG).

Alan Colonna has served as our executive vice president of global business development and supply chain management since September 2012. Prior to this role, he served as the senior regional vice president of the Gulf Coast U.S. region since 2009. Prior to that he was the senior regional vice president of the Western U.S. region from 2008 to 2009 and the regional vice president of the Western U.S. region from 2000-2007. Mr. Colonna began his career with Republic Supply of California in 1984, which was acquired by MRC in 1991, and has held a variety of operational positions including inside sales, branch manager and regional manager throughout his career. Mr. Colonna graduated from Cal Poly San Luis Obispo, California in 1982.

Scott A. Hutchinson has served as our executive vice president of Canada since November 2012. Before this role, he served as our executive vice president of North America operations beginning in November 2009. Prior to

26

Table of Contents

that, from January 2009 to November 2009 he had served as our senior vice president of the Eastern region covering most operational units east of the Mississippi River. Mr. Hutchinson’s extensive background in branch sales and operations was instrumental as he led the integration effort of the Midwest, Eastern and Appalachian regions. From October 1998 to January 2009, he served as senior vice president of our Midwest region. During this time he was key in the acquisitions and integration of Wilkins Supply, Joliet Valve, Cigma and Valvax, solidifying and expanding the market reach of the Company in the Midwest. From May 1988 to October 1998 he worked in various field positions including branch manager, regional manager and regional vice president in our Western Region. From 1984 to 1988, he served as outside sales representative for Grant Supply in Houston, Texas which became part of our Company in 1987. Prior to joining us, Mr. Hutchinson worked for Fluor Corporation in procurement. Mr. Hutchinson received a bachelor of arts degree in marketing from the University of Central Florida in 1977.

Neil P. Wagstaff has served as our executive vice president—international operations since January 1, 2011. Prior to that, he served as our executive vice president—international operations and as CEO of MRC Transmark since October 2009. From July 2006 until October 2009, he served as group chief executive of MRC Transmark, where he was responsible for the group’s overall performance in 13 operating companies in Europe, Asia and Australia and oversaw a number of acquisitions and integrations. Prior to that he held a variety of positions within MRC Transmark, serving as a group divisional director from 2003, responsible for operations in the UK and Asia, as well as managing director for the UK businesses. He was also sales and marketing director of Heaton Valves prior to the acquisition by MRC Transmark group in 1996, as well as sales and marketing director for Hattersley Heaton valves and Shipham Valves. Mr. Wagstaff began his career in the valve manufacturing business in 1983 when he studied mechanical engineering at the Saunders Valve Company. Educated at London Business School, he is a chartered director and fellow of the UK Institute of Directors.

27

Table of Contents

PART II

MRC Global Inc. common stock was listed on the New York Stock Exchange on April 17, 2012 following an initial public offering at a price of $21.00. The following table illustrates the high and low sales prices for the subsequent quarters.

As of February 2013, there were 77 holders of record of the Company’s common stock.

Our board of directors has not declared any dividends during 2011 or 2012 and currently has no intention to declare any dividends.

McJunkin Red Man Corporation’s Global ABL Facility and Term Loan restrict our ability to declare cash dividends. Any future dividends declared would be at the discretion of our board of directors and would depend on our financial condition, results of operations, cash flows, contractual obligations, the terms of our financing agreements at the time a dividend is considered, and other relevant factors.

28

Table of Contents

PERFORMANCE GRAPH

The graph below compares the cumulative total shareholder return on our common stock to the S&P 500 Index and the Dow Jones U.S. Industrial Suppliers Index. The total shareholder return assumes $100 invested on April 12, 2012, the date our stock first traded following our initial public offering, in MRC Global Inc., the S&P 500 Index and the Dow Jones U.S. Industrial Suppliers Index. It also assumes reinvestment of all dividends. The results shown in the graph below are not necessarily indicative of future performance.

Comparison of Cumulative Total Return

This information shall not be deemed to be ‘‘soliciting material’’ or to be ‘‘filed’’ with the SEC or subject to Regulation 14A (17 CFR 240.14a-1-240.14a-104), other than as provided in Item 201(e) of Regulation S-K, or to the liabilities of section 18 of the Exchange Act (15 U.S.C. 78r).

29

Table of Contents

The selected financial data presented below have been derived from the consolidated financial statements of MRC Global Inc. that have been prepared using accounting principles generally accepted in the United States of America which have been audited by Ernst & Young LLP, our independent registered public accounting firm. This data should be read in conjunction with “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements, related notes and other financial information included elsewhere in this report.

30

Table of Contents

In particular, we believe that Adjusted Gross Profit is a useful indicator of our operating performance because Adjusted Gross Profit measures our Company’s operating performance without regard to acquisition transaction-related amortization expenses.

However, Adjusted Gross Profit does not represent and should not be considered an alternative to gross profit or any other measure of financial performance calculated and presented in accordance with GAAP. Our Adjusted Gross Profit may not be comparable to similar measures that other companies report because other companies may not calculate Adjusted Gross Profit in the same manner as we do. Although we use Adjusted Gross Profit as a measure to assess the operating performance of our business, Adjusted Gross Profit has significant limitations as an analytical tool because it excludes certain material costs. For example, it does not include depreciation and amortization expense. Because we use capital assets, depreciation expense is a significant element of our costs and impacts our ability to generate revenue. In addition, the omission of amortization expense associated with our intangible assets further limits the usefulness of this measure. Furthermore, Adjusted Gross Profit does not account for our LIFO inventory costing methodology and, therefore, to the extent that recently purchased inventory accounts for a relatively large portion of our sales, Adjusted Gross Profit may overstate our operating performance. Because Adjusted Gross Profit does not account for certain expenses, its utility as a measure of our operating performance has material limitations. Because of these limitations, management does not view Adjusted Gross Profit in isolation or as a primary performance measure and also uses other measures, such as net income and sales, to measure operating performance.

31

Table of Contents

The following table reconciles Adjusted Gross Profit to gross profit (in millions):

In particular, we believe that Adjusted EBITDA is a useful indicator of our operating performance because Adjusted EBITDA measures our Company’s operating performance without regard to certain non-recurring, non-cash or transaction-related expenses.

Adjusted EBITDA, however, does not represent and should not be considered as an alternative to net income, cash flow from operations or any other measure of financial performance calculated and presented in accordance with GAAP. Our Adjusted EBITDA may not be comparable to similar measures that other companies report because other companies may not calculate Adjusted EBITDA in the same manner as we do. Although we use Adjusted EBITDA as a measure to assess the operating performance of our business, Adjusted EBITDA has significant limitations as an analytical tool because it excludes certain material costs. For example, it does not include interest expense, which has been a significant element of our costs. Because we use capital assets, depreciation expense is a significant element of our costs and impacts our ability to generate revenue. In addition, the omission of the amortization expense associated with our intangible assets further limits the usefulness of this measure. Adjusted EBITDA also does not include the payment of certain taxes, which is also a significant element of our operations. Furthermore, Adjusted EBITDA does not account for our LIFO inventory costing methodology, and therefore, to the extent that recently purchased inventory accounts for a relatively large portion of our sales, Adjusted EBITDA may overstate our operating performance. Because Adjusted EBITDA does not account for certain expenses, its utility as a measure of our operating performance has material limitations. Because of these limitations, management does not view Adjusted EBITDA in isolation or as a primary performance measure and also uses other measures, such as net income and sales, to measure operating performance.

32

Table of Contents

The following table reconciles Adjusted EBITDA with our net income (loss), as derived from our financial statements (in millions):

33

Table of Contents

We present Adjusted EBITDA RONA because we believe it is a useful indicator of our operating performance. Management believes that Adjusted EBITDA RONA provides meaningful supplemental information regarding our performance by excluding certain income and expense items and assets and liabilities that may not be indicative of the core business operating results and may help in comparing current period results with those of prior periods as well as with our peers. Our management uses Adjusted EBITDA RONA for determining a significant portion of the compensation of our executive officers. In addition, Adjusted EBITDA RONA is a useful indicator of our operating performance because it measures our performance without regard to acquisition transaction-related assets such as intangibles and goodwill.

However, Adjusted EBITDA RONA does not represent and should not be considered an alternative to other GAAP measures of performance such as net income. Also, our definition of Adjusted EBITDA RONA may not be comparable to similar measures that other companies report. Further, Adjusted EBITDA RONA has certain limitations, such as excluding our LIFO inventory costing methodology. In addition, the omission of our substantial intangible assets and goodwill further limits the usefulness of this measure. As a result, management does not view Adjusted EBITDA RONA in isolation or as a primary performance measure and uses other measures such as net income and sales to measure operating performance.

Management believes that the GAAP-based measure which is most comparable to Adjusted EBITDA RONA is a percentage with net income in the numerator and stockholders’ equity in the denominator. We believe Adjusted EBITDA is a useful measure of performance as compared to net income for the reasons stated above in footnote 4. We believe that for our Company total adjusted net assets (as calculated above) is a more useful measure than stockholders’ equity for purposes of a RONA calculation because, among other things, our calculation omits intangible assets and goodwill arising from acquisitions. Given the Company’s history of making numerous acquisitions in recent years, the Company believes that the measure it uses is more comparable to similar measures used by other companies if the effects of acquisitions are eliminated.

For a reconciliation of Adjusted EBITDA (the numerator in our calculation of Adjusted EBITDA RONA) to net income, see footnote 4 above. For a reconciliation of total adjusted net assets (the denominator in our calculation of Adjusted EBITDA RONA) to stockholders’ equity, see the following table:

34

Table of Contents

The following table summarizes (1) the numerator and denominator in our calculation of Adjusted EBITDA RONA and (2) the numerator (net income) and denominator (stockholders’ equity) in the most comparable GAAP-based measure.

35

Table of Contents

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with our financial statements and related notes included elsewhere in this report. This discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a number of factors, including, but not limited to, those set forth under “Cautionary Note Regarding Forward-Looking Statements” and “Item 1A—Risk Factors” and elsewhere in this report. All references throughout this section (and elsewhere in this report) to amounts available for borrowing under various credit facilities refer to amounts actually available for borrowing after giving effect to any borrowing base limitations imposed by the facility.

Cautionary Note Regarding Forward-Looking Statements

Management’s Discussion and Analysis of Financial Condition and Results of Operations (as well as other sections of this Annual Report on Form 10-K) contain forward-looking statements, including, for example, statements about our business strategy, our industry, our future profitability, growth in the industry sectors we serve, our expectations, beliefs, plans, strategies, objectives, prospects and assumptions, and estimates and projections of future activity and trends in the oil and natural gas industry. These forward-looking statements are not guarantees of future performance. These statements are based on management’s expectations that involve a number of business risks and uncertainties, any of which could cause actual results to differ materially from those expressed in or implied by the forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors, including the factors described under “Risk Factors”, that may cause our actual results and performance to be materially different from any future results or performance expressed or implied by these forward-looking statements. Such risks and uncertainties include, among other things: