MRC GLOBAL INC. - Annual Report: 2013 (Form 10-K)

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

FOR THE FISCAL YEAR ENDED DECEMBER 31, 2013

or

☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

FOR THE TRANSITION PERIOD FROM              TO

Commission file number: 001-35479

 

MRC Global Inc.

(Exact name of registrant as specified in its charter)

 

 

(877) 294-7574

(Registrant’s Telephone Number, including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

 

Securities registered pursuant to Section 12(g) of the Act: None

(Title of class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☒    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.    

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No   ☒

The Company’s common stock is listed on the New York Stock Exchange under the symbol “MRC”. The aggregate market value of voting common stock held by non-affiliates was $2,209 million as of the close of trading as reported on the New York Stock Exchange on June 28, 2013. There were 101,917,875 shares of the registrant’s common stock, par value $0.01 per share, issued and outstanding as of February 14, 2014.

---

 

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s proxy statement relating to the 2014 Annual Meeting of Stockholders, to be filed within 120 days of the end of the fiscal year covered by this report, are incorporated by reference into Part III of this Annual Report on Form 10-K.

 

 

---

 

TABLE OF CONTENTS

 

 

 

 

 

---

 

PART I

Unless otherwise indicated or the context otherwise requires, all references to “the Company”, “MRC Global”, “MRC”, “we”, “us”, “our”, and the “registrant” refer to MRC Global Inc. and its consolidated subsidiaries.

ITEM  1.BUSINESS

General

We are the largest global industrial distributor of pipe, valves and fittings (“PVF”) and related products and services to the energy industry based on sales and hold a leading position in our industry across each of the upstream (exploration, production and extraction of underground oil and natural gas), midstream (gathering and transmission of oil and natural gas, natural gas utilities and the storage and distribution of oil and natural gas) and downstream (crude oil refining, petrochemical processing and general industrials) sectors. We offer more than 200,000 SKUs, including an extensive array of PVF, oilfield supply, automation, instrumentation and other general and specialty industry supply products from our over 20,000 suppliers. Through our U.S., Canadian, and International segments, we serve our more than 19,000 customers through over 400 service locations throughout North America, Europe, Asia and Australasia. We are diversified by geography, the industry sectors we serve and the products we sell.

Our customers use the PVF and oilfield supplies that we supply in mission critical process applications that require us to provide a high degree of product knowledge, technical expertise and comprehensive value added services to our customers. We seek to provide best-in-class service and a one-stop shop for our customers by satisfying the most complex, multi-site needs of many of the largest companies in the energy and industrial sectors as their primary PVF supplier. We provide services such as product testing, manufacturer assessments, multiple daily deliveries, volume purchasing, inventory and zone store management and warehousing, technical support, training, just-in-time delivery, truck stocking, order consolidation, product tagging and system interfaces customized to customer and supplier specifications for tracking and replenishing inventory, engineering of control packages, and valve inspection and repair, which we believe result in deeply integrated customer relationships. We believe the critical role we play in our customers’ supply chain, together with our extensive product offering, broad global presence, customer-linked scalable information systems and efficient distribution capabilities, serve to solidify our long-standing customer relationships and drive our growth. As a result, we have an average relationship of over 20 years with our 25 largest customers.

We have benefited historically from several growth trends within the energy industry, including high levels of customer expansion and maintenance expenditures. Several factors have driven the long-term growth in spending, including underinvestment in North American energy infrastructure, production and capacity constraints, and market expectations of future improvements in the oil, natural gas, refined products, petrochemical and other industrial sectors. In addition, the products we distribute are often used in extreme operating environments, leading to the need for a regular replacement cycle. Approximately 72% of our sales are attributable to multi-year maintenance, repair and operations (“MRO”) arrangements. Our average annual retention rate for these contracts since 2000 is 95%. Depending on the nature of the activity, our MRO arrangements include both capital expenditures and operating expenses on the part of our customers.  Project activities, including facility expansions, exploration or new construction projects, are more commonly associated with a customer’s capital expenditures budget. These projects can be more sensitive to global oil and natural gas prices and general economic conditions. We mitigate our exposure to price volatility by limiting the length of any price-protected contracts and we believe that we have the ability to pass price increases on to the marketplace.

MRC Global Inc. was incorporated in Delaware on November 20, 2006. Our principal executive office is located at 2 Houston Center, 909 Fannin Street, Suite 3100, Houston, Texas 77010. Our telephone number is (877) 294-7574. Our website address is www.mrcglobal.com. Information contained on our website is expressly not incorporated by reference into this document.

Business Strategy

Our goal is to grow our market position as an industrial distributor of PVF and related products to the energy industry. Our strategy is focused on pursuing growth. Our strategic objectives are to increase our market share by executing global preferred supplier contracts, completing acquisitions and growing organically as the PVF market grows as well as by taking market share from competitors while simultaneously rebalancing our product mix to higher margin items.

We seek to achieve our objectives by increasing the scope of geographies in which we serve or product lines we offer within PVF, as well as, through the execution of integrated supply agreements, MRO arrangements and capital projects. 

Our current focus for acquisitions is on those that will broaden our international geographic footprint, in certain energy intensive regions, or those that expand our product offerings in stainless and alloy. We also consider “bolt-on” acquisitions that supplement our PVF leadership position.

We seek to extend our current product offerings to include pipe, fittings, flanges and other products (“PFF”), in our International segment to complete our global PVF offering.  

---

 

We continually add other products and new suppliers, including alloy, chrome, stainless products, gaskets, seals, safety and other industrial supply products, into our existing set of product offerings. We are focused on higher margin products such as valves, valve automation and high alloy products.

Operations

Our business is segregated into three geographical operating segments, our U.S., Canadian, and International operations. These segments represent our business of providing PVF and related products and services to the energy and industrial industries, across each of the upstream, midstream and downstream sectors. Financial information regarding our reportable segments appears in “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in Note 13 of the Notes to the Consolidated Financial Statements included in Item 8 of this Form 10-K.

Our U.S. segment represented approximately 76% of our consolidated revenues in 2013. We maintain distribution operations throughout the country with concentrations in the most active oil and natural gas producing regions. Our network is comprised of over 130 branch locations, 8 distribution centers, 13 valve automation service centers and over 95 third-party pipe yards.

Our Canadian segment represented approximately 14% of our consolidated revenues in 2013. Our distribution operations extend throughout the western part of Canada with concentrations in Alberta and western Saskatchewan. In Canada, we have over 40 branch locations, one distribution center, one valve automation service center and 24 third-party pipe yards.

Our International segment represented approximately 10% of our consolidated revenues in 2013. This segment includes over 55 branch locations located throughout Europe, Asia, Australasia and the Middle East with six distribution centers in the United Kingdom, Norway, Singapore, the Netherlands and Australia. We also maintain 13 valve automation service centers in Europe, Asia and Australia as well as 10 pipe yards in Australia, the United Kingdom, and Norway. 

Products:  We distribute a complete line of PVF products, primarily used in specialized applications in the energy infrastructure sector. The products we distribute are used in the construction, maintenance, repair and overhaul of equipment used in extreme operating conditions such as high pressure, high/low temperature and high corrosive and abrasive environments. We are required to carry significant amounts of inventory to meet the rapid delivery, often same day, requirements of our customers. The breadth and depth of our product offerings and our extensive global presence allow us to provide high levels of service to our customers. Due to our broad inventory coverage, we are able to fulfill more orders more quickly, including those with lower volume and specialty items, than we would be able to if we operated on a smaller scale or only at a local or regional level. Key product types are described below:

•Valves and Specialty Products. Products offered include ball, butterfly, gate, globe, check, needle and plug valves which are manufactured from cast steel, stainless/alloy steel, forged steel, carbon steel or cast and ductile iron. Valves are generally used in oilfield and industrial applications to control direction, velocity and pressure of fluids and gases within transmission networks. Specialty products include lined corrosion resistant piping systems, control valves, valve automation and top work components used for regulating flow and on/off service, and a wide range of steam and instrumentation products used in various process applications within our refinery, petrochemical and general industrial sectors.

•Carbon Steel Fittings and Flanges and Stainless Steel and Alloy Pipe and Fittings. Carbon steel fittings and flanges include carbon weld fittings, flanges and piping components used primarily to connect piping and valve systems for the transmission of various liquids and gases. These products are used across all the industries in which we operate. Stainless steel and alloy pipe and fittings include stainless, alloy and corrosion resistant pipe, tubing, fittings and flanges. These are used most often in the chemical, refining and power generation industries but are used across all of the sectors in which we operate. Alloy products are principally used in high-pressure, high-temperature and high-corrosion applications typically seen in process piping applications.

•Line Pipe. Carbon line pipe is typically used in high-yield, high-stress and abrasive applications such as the gathering and transmission of oil, natural gas and phosphates. Line pipe is part of our tubular product category.

•Oil Country Tubular Goods (“OCTG”). OCTG is part of our tubular product category. It includes casing (used for production and to line the well bore) and tubing pipe (used to extract oil or natural gas from wells) and is either classified as carbon or alloy depending on the grade of material.

•Other. Other includes natural gas distribution products, oilfield supplies, and other industrial products such as mill and safety and electrical supplies. Natural gas distribution products include risers, meters, polyethylene pipe and fittings and various other components and industrial supplies used primarily in the distribution of natural gas to residential and commercial customers. We offer a comprehensive range of oilfield and industrial supplies and completion equipment, and products offered include high density polyethylene pipe,  fittings and rods. Additionally, we can supply a wide range of specialized production equipment including meter runs, tanks and separators used in our upstream sector.

---

 

Services:  We provide many of our customers with a comprehensive array of services including multiple deliveries each day, zone store management, valve tagging and significant system interfaces that directly tie the customer into our proprietary information systems. This allows us to interface with our customers’ IT systems and provide an integrated supply service. Such services strengthen our position with our customers as we become more integrated into the customer’s business and supply chain and are able to market a “total transaction value” solution rather than individual product prices.

Our comprehensive information systems, which provide for customer and supplier electronic integrations, information sharing and e-commerce applications, further strengthen our ability to provide high levels of service to our customers. In 2013, we processed over 1.6 million electronic data interface (“EDI”) customer transactions. Our highly specialized implementation group focuses on the integration of our information systems and implementation of improved business processes with those of a new customer during the initiation phase. By maintaining a specialized team, we are able to utilize best practices to implement our systems and processes, thereby providing solutions to customers in a more organized, efficient and effective manner. This approach is valuable to large, multi-location customers who have demanding service requirements.

As major integrated and large independent energy companies have implemented efficiency initiatives to focus on their core business, many of these companies have begun outsourcing certain of their procurement and inventory management requirements. In response to these initiatives and to satisfy customer service requirements, we offer integrated supply services to customers who wish to outsource all or a part of the administrative burden associated with sourcing PVF and other related products, and we also often have MRC employees on-site full-time at many customer locations. Our integrated supply group offers procurement-related services, physical warehousing services, product quality assurance and inventory ownership and analysis services.

Suppliers: We source the products we distribute from a global network of suppliers in over 35 countries. Our suppliers benefit from access to our diversified customer base and, by consolidating customer orders, we benefit from stronger purchasing power and preferred vendor programs. Our purchases from our 25 largest suppliers in 2013 approximated 43% of our total purchases, with our single largest supplier constituting approximately 6%. We are the largest customer for many of our suppliers, and we source a significant majority of the products we distribute directly from the manufacturer. The remainder of the products we distribute are sourced from manufacturer representatives, trading companies and, in some instances, other distributors.

We believe our customers and suppliers recognize us as an industry leader in part due to the quality of products we supply and for the formal processes we use to evaluate vendor performance. This vendor assessment process is referred to as the MRC Supplier Registration Process, which involves employing individuals, certified by the International Registry of Certificated Auditors, who specialize in conducting on-site assessments of our manufacturers as well as monitoring and evaluating the quality of goods produced. The result of this process is the MRC approved manufacturer’s listing (“AML”). Products from the manufacturers on this list are supplied across many of the industries we support. Given that many of our largest customers, especially those in our downstream sector, maintain their own formal AML listing, we are recognized as an important source of information sharing with our key customers regarding the results of our on-site assessment. For this reason, together with our commitment to promote high quality products that bring the best overall value to our customers, we often become the preferred provider of AML products to these customers. Many of our customers regularly collaborate with us regarding specific manufacturer performance, our own experience with vendors’ products and the results of our on-site manufacturer assessments. The emphasis placed on the MRC AML by both our customers and suppliers helps secure our central and critical position in the global PVF supply chain.

We utilize a variety of freight carriers in addition to our corporate truck fleet to ensure timely and efficient delivery of our products. With respect to deliveries of products from us to our customers, or our outbound needs, we utilize both our corporate fleet and third-party transportation providers. We utilize third parties for approximately 19% of our outbound deliveries. With respect to shipments of products from suppliers to us, or our inbound needs, we principally use third-party carriers.

Sales and Marketing: We distribute our products to a wide variety of end-users with operations in 19 countries and direct sales into over 45 countries around the world. Our broad distribution network and customer base allow us to capitalize on our extensive inventory offering. Local relationships, depth of inventory, service and timely delivery are critical to the sales process in the PVF distribution industry. Our sales efforts are customer and product driven and provide a system that is more responsive to changing customer and product needs than a traditional, fully centralized structure.

Our sales model applies a two-pronged approach to address both regional and national markets. Regional sales teams are based in our core geographic regions and are complemented by a global accounts sales team organized by sector or product expertise and focused on large regional, national or global customers. These sales teams are then supported by groups with additional specific service or product expertise, including integrated supply and implementation. Our overall sales force is then internally divided into outside and inside sales forces.

---

 

Our over 500 account managers and outside sales representatives develop relationships with prospective and existing customers in an effort to better understand their needs and to increase the number of our products specified or approved by a given customer. Outside sales representatives may be branch outside sales representatives, focused on customer relationships in specific geographies, or technical outside sales representatives, who focus on specific products and provide detailed technical support to customers. Internationally, for valve sales, the majority of our sales force is comprised of qualified engineers who are able to meet complex customer requirements, select optimal solutions from a range of products to increase customers’ efficiency and lower total product lifecycle costs.

To address the needs of our customer base, our inside sales force of over 1,000 customer service representatives is responsible for processing orders generated by new and existing customers as well as by our outside sales force. The customer service representatives develop order packages based on specific customer needs, interface with manufacturers to determine product availability, ensure on-time delivery and establish pricing of materials and services based on guidelines and predetermined metrics that management establishes.

Seasonality: Our business experiences mild seasonal effects as demand for the products we distribute is generally higher during the months of August, September and October. Demand for the products we distribute during the months of November and December and early in the year generally tends to be lower due to a lower level of activity near the end of the calendar year in the industry sectors we serve and due to winter weather disruptions. In addition, certain exploration and production (“E&P”) activities, primarily in Canada, typically experience a springtime reduction due to seasonal thaws and regulatory restrictions, limiting the ability of drilling rigs to operate effectively during these periods.

Customers: Our principal customers are companies active in the upstream, midstream and downstream sectors of the energy industry as well as in other industrial and energy sectors. Due to the demanding operating conditions in the energy industry, high costs and safety risks associated with equipment failure, customers prefer highly reliable products and vendors with established qualifications, reputation and experience. As our PVF products typically are mission critical and represent a fraction of the total cost of a given project, our customers often place a premium on service and high reliability given the high cost to them of maintenance or new project delays. We strive to build long-term relationships with our customers by maintaining our reputation as a supplier of high-quality, efficient and reliable products and value-added services and solutions.

We have a diverse customer base of over 19,000 active customers. We are not dependent on any one customer or group of customers. A majority of our customers are offered terms of net 30 days (payment is due within 30 days of the date of the invoice). Customers generally have the right to return products we have sold, subject to certain conditions and limitations, although returns have historically been immaterial to our sales. For the years ended December 31, 2013 and 2012, our 25 largest customers represented approximately half of our total sales, with our single largest customer constituting approximately 6%. For many of our largest customers, we are often their sole or primary PVF provider by sector or geography, their largest or second largest supplier in aggregate or, in certain instances, the sole provider for their upstream, midstream and downstream procurement needs. We believe that many customers for which we are not the exclusive or comprehensive U.S. sole source PVF provider will continue to reduce their number of suppliers in an effort to reduce costs and administrative burdens and focus on their core operations. As such, we believe these customers will seek to select PVF distributors with the most extensive product offering and broadest geographic presence. Furthermore, we believe our business will benefit as companies in the energy industry continue to consolidate and the larger, resulting companies look to larger distributors such as ourselves as their sole or primary source PVF provider.

Backlog: We determine backlog by the amount of unshipped customer orders, either specific or general in nature (including orders held under pipe programs), which the customer may revise or cancel in certain instances.  Our backlog at December 31, 2013 was $758 million including $470 million, $90 million and $198 million in our US, Canadian and International segments, respectively. Our backlog at December 31, 2012 was $664 million including $455 million, $62 million and $147 million in our US, Canadian and International segments, respectively. There can be no assurance that the backlog amounts will ultimately be realized as revenue or that we will earn a profit on the backlog of orders, but we expect that substantially all of the sales in our backlog will be realized in 2014.

Competition: We are the largest PVF distributor to the energy industry based on sales. The broad PVF distribution industry is fragmented and includes large, nationally recognized distributors, major regional distributors and many smaller local distributors. The principal methods of competition include offering prompt local service, fulfillment capability, breadth of product and service offerings, price and total costs to the customer. Our competitors include nationally recognized PVF distributors, such as National Oilwell Distribution (a division of National Oilwell Varco, Inc.), Ferguson Enterprises (a subsidiary of Wolseley, plc), Marubeni-Itochu, and Sumitomo, several large regional or product-specific competitors and many local, family-owned PVF distributors.

 

---

 

Employees: Including our recent acquisitions, we have approximately 5,150 employees of which 214 employees belong to a union and are covered by collective bargaining agreements. We also have 74 employees in Australia that are not members of a union but are covered by union negotiated agreements. We consider our relationships with our employees to be good.

For a breakdown of our annual revenues by geography, see “Note 13—Segment, Geographic and Product Line Information” to the audited consolidated financial statements as of December 31, 2013.

Environmental Matters

We are subject to a variety of federal, state, local, foreign and provincial environmental, health and safety laws, regulations and permitting requirements, including those governing the discharge of pollutants or hazardous substances into the air, soil or water, the generation, handling, use, management, storage and disposal of, or exposure to, hazardous substances and wastes, the responsibility to investigate, remediate, monitor and clean up contamination and occupational health and safety. Fines and penalties may be imposed for non-compliance with applicable environmental, health and safety requirements and the failure to have or to comply with the terms and conditions of required permits. Historically, the costs to comply with environmental and health and safety requirements have not been material to our financial position, results of operations or cash flows. We are not aware of any pending environmental compliance or remediation matters that, in the opinion of management, are reasonably likely to have a material effect on our business, financial position or results of operations or cash flows. However, the failure by us to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, employee, neighbor or other third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders requiring corrective measures, including the installation of pollution control equipment or remedial actions.

Under certain laws and regulations, such as the U.S. federal Superfund law or its foreign equivalents, the obligation to investigate, remediate, monitor and clean up contamination at a facility may be imposed on current and former owners, lessees or operators or on persons who may have sent waste to that facility for disposal. Liability under these laws and regulations may be imposed without regard to fault or to the legality of the activities giving rise to the contamination. Although we are not aware of any active litigation against us under the U.S. federal Superfund law or its state or foreign equivalents, contamination has been identified at several of our current and former facilities, and we have incurred and will continue to incur costs to investigate, remediate, monitor and clean up these conditions. Moreover, we may incur liabilities in connection with environmental conditions currently unknown to us relating to our prior, existing or future owned or leased sites or operations or those of predecessor companies whose liabilities we may have assumed or acquired. We believe that indemnities contained in certain of our acquisition agreements may cover certain environmental conditions existing at the time of the acquisition subject to certain terms, limitations and conditions. However, if these indemnification provisions terminate or if the indemnifying parties do not fulfill their indemnification obligations, we may be subject to liability with respect to the environmental matters that those indemnification provisions address.

In addition, environmental, health and safety laws and regulations applicable to our business and the business of our customers, including laws regulating the energy industry, and the interpretation or enforcement of these laws and regulations, are constantly evolving and it is impossible to predict accurately the effect that changes in these laws and regulations, or their interpretation or enforcement, may have upon our business, financial condition or results of operations. Should environmental laws and regulations, or their interpretation or enforcement, become more stringent, our costs, or the costs of our customers, could increase, which may have a material adverse effect on our business, financial position, results of operations or cash flows.

In particular, legislation and regulations limiting emissions of greenhouse gases, including carbon dioxide associated with the burning of fossil fuels, are at various stages of consideration and implementation, at the international, national, regional and state levels. In 2005, the Kyoto Protocol to the 1992 United Nations Framework Convention on Climate Change, which established a binding set of emission targets for greenhouse gases, became binding on the countries that ratified it. Attention is now focused on the development of a post-2012 international policy framework to guide international action to address climate change when the Kyoto Protocol expired in 2012. Certain states and regions have adopted or are considering legislation or regulation imposing overall caps or taxes on greenhouse gas emissions from certain sectors or facility categories or mandating the increased use of electricity from renewable energy sources. Similar legislation has been proposed at the federal level. In addition, the U.S Environmental Protection Agency (“EPA”) has implemented regulations that require permits for and reductions in greenhouse gas emissions for certain categories of emission sources, the most recent of which became effective in August 2012. Pursuant to the terms of a settlement agreement, the EPA is in the process of finalizing greenhouse gas emissions standards, known as New Source Performance Standards (“NSPS”), for new power plants and plans to propose and issue NSPS for existing power plants by June 2014 and finalize them a year later.  The settlement agreement also calls for NSPS for greenhouse gas emissions from oil refineries; however the EPA has not proposed such NSPS to date. NSPS for other oil refinery emissions were issued by the EPA pursuant to the settlement agreement in September 2012 and became effective in November 2012 with minor amendments effective in December 2013. These laws and regulations could negatively impact the market for the products we distribute and, consequently, our business.

 

---

 

In addition, federal, state, local, foreign and provincial laws, regulations and permitting requirements have been adopted or are being considered that could impose more stringent permitting, disclosure, wastewater and other waste disposal and well construction and testing requirements on hydraulic fracturing, a practice involving the injection of water containing certain other substances into rock formations (after perforating the formation with explosive charges) to stimulate production of hydrocarbons, particularly natural gas, from shale basin regions. Other states and the federal government are considering regulating this practice. These regulations include a variety of well construction, set back, wastewater disposal, emissions, baseline sampling, operational and disclosure requirements limiting how fracturing can be performed and requiring various degrees of disclosures regarding the contents of chemicals injected into the rock formations, as well as moratoria on all hydraulic fracturing activity. Any increased federal, regional or state regulation of hydraulic fracturing could reduce the demand for our products in these regions.

Exchange Rate Information

In this report, unless otherwise indicated, foreign currency amounts are converted into U.S. dollar amounts at the exchange rates in effect on December 31, 2013 and 2012 for balance sheet figures. Income statement figures are converted on a monthly basis, using each month’s average conversion rate.

Available Information

Our website is located at www.mrcglobal.com. We make available free of charge on or through our internet website our annual report on Form 10-K, our quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC.

 

---

 

ITEM 1A.    RISK FACTORS

You should carefully consider the following risk factors as well as the other risks and uncertainties contained in this Annual Report on
Form 10-K or in our other SEC filings.  The occurrence of one or more of these risks or uncertainties could materially and adversely affect our business, financial condition and operating results. In this Annual Report on Form 10-K, unless the context expressly requires a different reading, when we state that a factor could “adversely affect us”, have a “material adverse effect”, “adversely affect our business” and similar expressions, we mean that the factor could materially and adversely affect our business, financial condition,  operating results and cash flows. Information contained in this section may be considered “forward-looking statements”. See “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Cautionary Note Regarding Forward-Looking Statements” for a discussion of certain qualifications regarding forward looking statements.

Risks Related to Our Business

Decreased capital and other expenditures in the energy industry, which can result from decreased oil and natural gas prices, among other things, can adversely impact our customers’ demand for our products and our revenue.

A large portion of our revenue depends upon the level of capital and operating expenditures in the oil and natural gas industry, including capital and other expenditures in connection with exploration, drilling, production, gathering, transportation, refining and processing operations. Demand for the products we distribute and services we provide is particularly sensitive to the level of exploration, development and production activity of, and the corresponding capital and other expenditures by, oil and natural gas companies. A material decline in oil or natural gas prices could depress levels of exploration, development and production activity and, therefore, could lead to a decrease in our customers’ capital and other expenditures. If our customers’ expenditures decline, our business will suffer.

Volatile oil and gas prices affect demand for our products.

Prices for oil and natural gas are subject to large fluctuations in response to relatively minor changes in the supply of and demand for oil and natural gas, market uncertainty and a variety of other factors that are beyond our control. Any sustained decrease in capital expenditures in the oil and natural gas industry could have a material adverse effect on us.

Many factors affect the supply of and demand for energy and, therefore, influence oil and natural gas prices, including:

•the level of domestic and worldwide oil and natural gas production and inventories;

•the level of drilling activity and the availability of attractive oil and natural gas field prospects, which governmental actions may affect, such as regulatory actions or legislation, or other restrictions on drilling, including those related to environmental concerns (e.g., a temporary moratorium on deepwater drilling in the Gulf of Mexico following a rig accident or oil spill);

•the discovery rate of new oil and natural gas reserves and the expected cost of developing new reserves;

•the actual cost of finding and producing oil and natural gas;

•depletion rates;

•domestic and worldwide refinery overcapacity or undercapacity and utilization rates;

•the availability of transportation infrastructure and refining capacity;

•increases in the cost of products and services that the oil and gas industry uses, such as those that we provide, which may result from increases in the cost of raw materials such as steel;

•shifts in end-customer preferences toward fuel efficiency and the use of natural gas;

•the economic or political attractiveness of alternative fuels, such as coal, hydrocarbon, wind, solar energy and biomass-based fuels;

•increases in oil and natural gas prices or historically high oil and natural gas prices, which could lower demand for oil and natural gas products;

•worldwide economic activity including growth in non-OECD countries, including (among others) China and India;

•interest rates and the cost of capital;

•national government policies, including government policies that could nationalize or expropriate oil and natural gas exploration, production, refining or transportation assets;

•the ability of the Organization of Petroleum Exporting Countries (“OPEC”) to set and maintain production levels and prices for oil;

•the impact of armed hostilities, or the threat or perception of armed hostilities;

---

 

•environmental regulation;

•technological advances;

•global weather conditions and natural disasters;

•currency fluctuations; and

•tax policies.

Oil and natural gas prices have been and are expected to remain volatile. This volatility has historically caused oil and natural gas companies to change their strategies and expenditure levels from year to year. We have experienced in the past, and we will likely experience in the future, significant fluctuations in operating results based on these changes. In particular, volatility in the oil and natural gas sectors could adversely affect our business.

General economic conditions may adversely affect our business.

U.S. and global general economic conditions affect many aspects of our business, including demand for the products we distribute and the pricing and availability of supplies. General economic conditions and predictions regarding future economic conditions also affect our forecasts. A decrease in demand for the products we distribute or other adverse effects resulting from an economic downturn may cause us to fail to achieve our anticipated financial results. General economic factors beyond our control that affect our business and customers include interest rates, recession, inflation, deflation, customer credit availability, consumer credit availability, consumer debt levels, performance of housing markets, energy costs, tax rates and policy, unemployment rates, commencement or escalation of war or hostilities, the threat or possibility of war, terrorism or other global or national unrest, political or financial instability and other matters that influence our customers’ spending. Increasing volatility in financial markets may cause these factors to change with a greater degree of frequency or increase in magnitude. In addition, worldwide economic conditions could have an adverse effect on our business, prospects, operating results, financial condition, and cash flows going forward. Continued adverse economic conditions would have an adverse effect on us.

We may be unable to compete successfully with other companies in our industry.

We sell products and services in very competitive markets. In some cases, we compete with large companies with substantial resources. In other cases, we compete with smaller regional players that may increasingly be willing to provide similar products and services at lower prices. Competitive actions, such as price reductions, consolidation in the industry, improved delivery and other actions, could adversely affect our revenue and earnings. We could experience a material adverse effect to the extent that our competitors are successful in reducing our customers’ purchases of products and services from us. Competition could also cause us to lower our prices, which could reduce our margins and profitability. Furthermore, consolidation in our industry could heighten the impacts of the competition on our business and results of operations discussed above, particularly if consolidation results in competitors with stronger financial and strategic resources and could also result in increases to the prices we are required to pay for acquisitions we may make in the future.

Demand for the products we distribute could decrease if the manufacturers of those products were to sell a substantial amount of goods directly to end users in the sectors we serve.

Historically, users of PVF and related products have purchased certain amounts of these products through distributors and not directly from manufacturers. If customers were to purchase the products that we sell directly from manufacturers, or if manufacturers sought to increase their efforts to sell directly to end users, we could experience a significant decrease in profitability. These or other developments that remove us from, or limit our role in, the distribution chain, may harm our competitive position in the marketplace, reduce our sales and earnings and adversely affect our business.

We may experience unexpected supply shortages.

We distribute products from a wide variety of manufacturers and suppliers. Nevertheless, in the future we may have difficulty obtaining the products we need from suppliers and manufacturers as a result of unexpected demand or production difficulties that might extend lead times. Also, products may not be available to us in quantities sufficient to meet our customer demand. Our inability to obtain products from suppliers and manufacturers in sufficient quantities, or at all, could adversely affect our product offerings and our business.

We may experience cost increases from suppliers, which we may be unable to pass on to our customers.

In the future, we may face supply cost increases due to, among other things, unexpected increases in demand for supplies, decreases in production of supplies or increases in the cost of raw materials or transportation. Any inability to pass supply price increases on to our customers could have a material adverse effect on us. For example, we may be unable to pass increased supply costs on to our customers because significant amounts of our sales are derived from stocking program arrangements, contracts and MRO

---

 

arrangements, which provide our customers time limited price protection, which may obligate us to sell products at a set price for a specific period. In addition, if supply costs increase, our customers may elect to purchase smaller amounts of products or may purchase products from other distributors. While we may be able to work with our customers to reduce the effects of unforeseen price increases because of our relationships with them, we may not be able to reduce the effects of the cost increases. In addition, to the extent that competition leads to reduced purchases of products or services from us or a reduction of our prices, and these reductions occur concurrently with increases in the prices for selected commodities which we use in our operations, including steel, nickel and molybdenum, the adverse effects described above would likely be exacerbated and could result in a prolonged downturn in profitability.

We do not have contracts with most of our suppliers. The loss of a significant supplier would require us to rely more heavily on our other existing suppliers or to develop relationships with new suppliers. Such a loss may have an adverse effect on our product offerings and our business.

Given the nature of our business, and consistent with industry practice, we do not have contracts with most of our suppliers. We generally make our purchases through purchase orders. Therefore, most of our suppliers have the ability to terminate their relationships with us at any time. Approximately 43% of our total purchases during the year ended December 31, 2013 were from our 25 largest suppliers. Although we believe there are numerous manufacturers with the capacity to supply the products we distribute, the loss of one or more of our major suppliers could have an adverse effect on our product offerings and our business. Such a loss would require us to rely more heavily on our other existing suppliers or develop relationships with new suppliers, which may cause us to pay higher prices for products due to, among other things, a loss of volume discount benefits currently obtained from our major suppliers.

Price reductions by suppliers of products that we sell could cause the value of our inventory to decline. Also, these price reductions could cause our customers to demand lower sales prices for these products, possibly decreasing our margins and profitability on sales to the extent that we purchased our inventory of these products at the higher prices prior to supplier price reductions.

The value of our inventory could decline as a result of manufacturer price reductions with respect to products that we sell. There is no assurance that a substantial decline in product prices would not result in a write-down of our inventory value. Such a write-down could have an adverse effect on our financial condition.

Also, decreases in the market prices of products that we sell could cause customers to demand lower sales prices from us. These price reductions could reduce our margins and profitability on sales with respect to the lower-priced products. Reductions in our margins and profitability on sales could have a material adverse effect on us.

A substantial decrease in the price of steel could significantly lower our gross profit or cash flow.

We distribute many products manufactured from steel. As a result, the price and supply of steel can affect our business and, in particular, our tubular product category. When steel prices are lower, the prices that we charge customers for products may decline, which affects our gross profit and cash flow. At times pricing and availability of steel can be volatile due to numerous factors beyond our control, including general domestic and international economic conditions, labor costs, sales levels, competition, consolidation of steel producers, fluctuations in and the costs of raw materials necessary to produce steel, steel manufacturers’ plant utilization levels and capacities, import duties and tariffs and currency exchange rates. Increases in manufacturing capacity for the tubular products could put pressure on the prices we receive for our tubular products. When steel prices decline, customer demands for lower prices and our competitors’ responses to those demands could result in lower sales prices and, consequently, lower gross profit and cash flow.

If steel prices rise, we may be unable to pass along the cost increases to our customers.

We maintain inventories of steel products to accommodate the lead time requirements of our customers. Accordingly, we purchase steel products in an effort to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers based upon historic buying practices, contracts with customers and market conditions. Our commitments to purchase steel products are generally at prevailing market prices in effect at the time we place our orders. If steel prices increase between the time we order steel products and the time of delivery of the products to us, our suppliers may impose surcharges that require us to pay for increases in steel prices during the period. Demand for the products we distribute, the actions of our competitors and other factors will influence whether we will be able to pass on steel cost increases and surcharges to our customers, and we may be unsuccessful in doing so.

---

 

We do not have long-term contracts or agreements with many of our customers. The contracts and agreements that we do have generally do not commit our customers to any minimum purchase volume. The loss of a significant customer may have a material adverse effect on us.

Given the nature of our business, and consistent with industry practice, we do not have long-term contracts with many of our customers. In addition, our contracts, including our MRO contracts, generally do not commit our customers to any minimum purchase volume. Therefore, a significant number of our customers, including our MRO customers, may terminate their relationships with us or reduce their purchasing volume at any time. Furthermore, the long-term customer contracts that we do have are generally terminable without cause on short notice. Our 25 largest customers represented approximately half of our sales for the year ended December 31, 2013. The products that we may sell to any particular customer depend in large part on the size of that customer’s capital expenditure budget in a particular year and on the results of competitive bids for major projects. Consequently, a customer that accounts for a significant portion of our sales in one fiscal year may represent an immaterial portion of our sales in subsequent fiscal years. The loss of a significant customer, or a substantial decrease in a significant customer’s orders, may have an adverse effect on our sales and revenue.  In addition, we are subject to customer audit clauses in many of our multi-year contracts. If we are not able to provide the proper documentation or support for invoices per the contract terms, we may be subject to negotiated settlements with our major customers.

Changes in our customer and product mix could cause our gross profit percentage to fluctuate.

From time to time, we may experience changes in our customer mix or in our product mix. Changes in our customer mix may result from geographic expansion, daily selling activities within current geographic markets and targeted selling activities to new customer segments. Changes in our product mix may result from marketing activities to existing customers and needs communicated to us from existing and prospective customers. If customers begin to require more lower-margin products from us and fewer higher-margin products, our business, results of operations and financial condition may suffer.

Customer credit risks could result in losses.

The concentration of our customers in the energy industry may impact our overall exposure to credit risk as customers may be similarly affected by prolonged changes in economic and industry conditions. Further, laws in some jurisdictions in which we operate could make collection difficult or time consuming. We perform ongoing credit evaluations of our customers and do not generally require collateral in support of our trade receivables. While we maintain reserves for expected credit losses, we cannot assure these reserves will be sufficient to meet write-offs of uncollectible receivables or that our losses from such receivables will be consistent with our expectations.

We may be unable to successfully execute or effectively integrate acquisitions.

One of our key operating strategies is to selectively pursue acquisitions, including large scale acquisitions, to continue to grow and increase profitability. However, acquisitions, particularly of a significant scale, involve numerous risks and uncertainties, including intense competition for suitable acquisition targets, the potential unavailability of financial resources necessary to consummate acquisitions in the future, increased leverage due to additional debt financing that may be required to complete an acquisition, dilution of our stockholders’ net current book value per share if we issue additional equity securities to finance an acquisition, difficulties in identifying suitable acquisition targets or in completing any transactions identified on sufficiently favorable terms, assumption of undisclosed or unknown liabilities and the need to obtain regulatory or other governmental approvals that may be necessary to complete acquisitions. In addition, any future acquisitions may entail significant transaction costs and risks associated with entry into new markets.

Even when acquisitions are completed, integration of acquired entities can involve significant difficulties, such as:

•failure to achieve cost savings or other financial or operating objectives with respect to an acquisition;

•strain on the operational and managerial controls and procedures of our business, and the need to modify systems or to add management resources;

•difficulties in the integration and retention of customers or personnel and the integration and effective deployment of operations or technologies;

•amortization of acquired assets, which would reduce future reported earnings;

•possible adverse short-term effects on our cash flows or operating results;

•diversion of management’s attention from the ongoing operations of our business;

•integrating personnel with diverse backgrounds and organizational cultures;

•coordinating sales and marketing functions;

---

 

•failure to obtain and retain key personnel of an acquired business; and

•assumption of known or unknown material liabilities or regulatory non-compliance issues.

Failure to manage these acquisition growth risks could have an adverse effect on us.

Our significant indebtedness may affect our ability to operate our business, and this could have a material adverse effect on us.

We have now and will likely continue to have a significant amount of indebtedness. As of December 31, 2013, we had total debt outstanding of $986.8 million, borrowing availability of $776.9 million under our credit facilities and total liquidity (borrowing capacity plus cash on hand) of $802.1 million. We may incur significant additional indebtedness in the future. If new indebtedness is added to our current indebtedness, the risks described below could increase. Our significant level of indebtedness could have important consequences, such as:

•limiting our ability to obtain additional financing to fund our working capital, acquisitions, expenditures, debt service requirements or other general corporate purposes;

•limiting our ability to use operating cash flow in other areas of our business because we must dedicate a substantial portion of these funds to service debt;

•limiting our ability to compete with other companies who are not as highly leveraged;

•subjecting us to restrictive financial and operating covenants in the agreements governing our and our subsidiaries’ long-term indebtedness;

•exposing us to potential events of default (if not cured or waived) under financial and operating covenants contained in our or our subsidiaries’ debt instruments that could have a material adverse effect on our business, results of operations and financial condition;

•increasing our vulnerability to a downturn in general economic conditions or in pricing of our products; and

•limiting our ability to react to changing market conditions in our industry and in our customers’ industries.

In addition, borrowings under our credit facilities bear interest at variable rates. If market interest rates increase, the variable-rate debt will create higher debt service requirements, which could adversely affect our cash flow. Our interest expense for the year ended December 31, 2013 was $60.7 million.

Our ability to make scheduled debt payments, to refinance our obligations with respect to our indebtedness and to fund capital and non-capital expenditures necessary to maintain the condition of our operating assets, properties and systems software, as well as to provide capacity for the growth of our business, depends on our financial and operating performance, which, in turn, is subject to prevailing economic conditions and financial, business, competitive, legal and other factors. Our business may not generate sufficient cash flow from operations, and future borrowings may not be available to us under our credit facilities in an amount sufficient to enable us to pay our indebtedness or to fund our other liquidity needs. We may seek to sell assets to fund our liquidity needs but may not be able to do so. We may also need to refinance all or a portion of our indebtedness on or before maturity. We may not be able to refinance any of our indebtedness on commercially reasonable terms or at all.

In addition, we are and will be subject to covenants contained in agreements governing our present and future indebtedness. These covenants include and will likely include restrictions on:

•investments;

•prepayment of certain indebtedness;

•the granting of liens;

•the incurrence of additional indebtedness;

•asset sales;

•the making of fundamental changes;

•transactions with affiliates; and

•the payment of dividends.

---

 

In addition, any defaults under our credit facilities, including our global asset-based lending facility (“Global ABL Facility”), our senior secured term loan B (“Term Loan”) or our other debt could trigger cross defaults under other or future credit agreements and may permit acceleration of our other indebtedness. If our indebtedness is accelerated, we cannot be certain that we will have sufficient funds available to pay the accelerated indebtedness or that we will have the ability to refinance the accelerated indebtedness on terms favorable to us or at all. For a description of our credit facilities and indebtedness, see “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources”.

We are a holding company and depend upon our subsidiaries for our cash flow.

We are a holding company. Our subsidiaries conduct all of our operations and own substantially all of our assets. Consequently, our cash flow and our ability to meet our obligations or to pay dividends or make other distributions in the future will depend upon the cash flow of our subsidiaries and our subsidiaries’ payment of funds to us in the form of dividends, tax sharing payments or otherwise. In addition, McJunkin Red Man Corporation, our direct subsidiary and the primary obligor under our Global ABL Facility and our Term Loan, is also dependent to a significant extent on the cash flow of its subsidiaries to meet its debt service obligations.

The ability of our subsidiaries to make any payments to us will depend on their earnings, the terms of their current and future indebtedness, tax considerations and legal and contractual restrictions on the ability to make distributions. In particular, our subsidiaries’ credit facilities currently impose significant limitations on the ability of our subsidiaries to make distributions to us and consequently our ability to pay dividends to our stockholders. Subject to limitations in our credit facilities, our subsidiaries may also enter into additional agreements that contain covenants prohibiting them from distributing or advancing funds or transferring assets to us under certain circumstances, including to pay dividends.

Our subsidiaries are separate and distinct legal entities. Any right that we have to receive any assets of or distributions from any of our subsidiaries upon the bankruptcy, dissolution, liquidation or reorganization, or to realize proceeds from the sale of their assets, will be junior to the claims of that subsidiary’s creditors, including trade creditors and holders of debt that the subsidiary issued.

Changes in our credit profile may affect our relationship with our suppliers, which could have a material adverse effect on our liquidity.

Changes in our credit profile may affect the way our suppliers view our ability to make payments and may induce them to shorten the payment terms of their invoices, particularly given our high level of outstanding indebtedness. Given the large dollar amounts and volume of our purchases from suppliers, a change in payment terms may have a material adverse effect on our liquidity and our ability to make payments to our suppliers and, consequently, may have a material adverse effect on us.

If tariffs and duties on imports into the U.S. of line pipe, OCTG or certain of the other products that we sell are lifted, we could have too many of these products in inventory competing against less expensive imports.

U.S. law currently imposes tariffs and duties on imports from certain foreign countries of line pipe and OCTG and, to a lesser extent, on imports of certain other products that we sell. If these tariffs and duties are lifted or reduced or if the level of these imported products otherwise increases, and our U.S. customers accept these imported products, we could be materially and adversely affected to the extent that we would then have higher-cost products in our inventory or increased supplies of these products drive down prices and margins. If prices of these products were to decrease significantly, we might not be able to profitably sell these products, and the value of our inventory would decline. In addition, significant price decreases could result in a significantly longer holding period for some of our inventory.

We are subject to strict environmental, health and safety laws and regulations that may lead to significant liabilities and negatively impact the demand for our products.

We are subject to a variety of federal, state, local, foreign and provincial environmental, health and safety laws; regulations and permitting requirements, including those governing the discharge of pollutants or hazardous substances into the air, soil or water, the generation, handling, use, management, storage and disposal of, or exposure to, hazardous substances and wastes, the responsibility to investigate and clean up contamination and occupational health and safety. Regulations and courts may impose fines and penalties for non-compliance with applicable environmental, health and safety requirements and the failure to have or to comply with the terms and conditions of required permits. Our failure to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup or regulatory or judicial orders requiring corrective measures, including the installation of pollution control equipment or remedial actions.

Certain laws and regulations, such as the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA” or the “U.S. federal Superfund law”) or its state and foreign equivalents, may impose the obligation to investigate and remediate contamination at a facility on current and former owners or operators or on persons who may have sent waste to that facility for disposal. These laws and regulations may impose liability without regard to fault or to the legality of the activities giving rise to the

---

 

contamination. Although we are not aware of any active litigation against us under the U.S. federal Superfund law or its state or foreign equivalents, contamination has been identified at several of our current and former facilities, and we have incurred and will continue to incur costs to investigate and remediate these conditions.

Moreover, we may incur liabilities in connection with environmental conditions currently unknown to us relating to our existing, prior or future owned or leased sites or operations or those of predecessor companies whose liabilities we may have assumed or acquired. We believe that indemnities contained in certain of our acquisition agreements may cover certain environmental conditions existing at the time of the acquisition, subject to certain terms, limitations and conditions. However, if these indemnification provisions terminate or if the indemnifying parties do not fulfill their indemnification obligations, we may be subject to liability with respect to the environmental matters that those indemnification provisions address.

In addition, environmental, health and safety laws and regulations applicable to our business and the business of our customers, including laws regulating the energy industry, and the interpretation or enforcement of these laws and regulations, are constantly evolving. It is impossible to predict accurately the effect that changes in these laws and regulations, or their interpretation or enforcement, may have on us. Should environmental laws and regulations, or their interpretation or enforcement, become more stringent, our costs, or the costs of our customers, could increase, which may have a material adverse effect on us.

In particular, legislation and regulations limiting emissions of greenhouse gases, including carbon dioxide associated with the burning of fossil fuels, are at various stages of consideration and implementation, at the international, national, regional and state levels. In 2005, the Kyoto Protocol to the 1992 United Nations Framework Convention on Climate Change, which established a binding set of emission targets for greenhouse gases, became binding on the countries that ratified it. Attention is now focused on the development of a post-2012 international policy framework to guide international action to address climate change when the Kyoto Protocol expired in 2012. Certain states and regions have adopted or are considering legislation or regulation imposing overall caps or taxes on greenhouse gas emissions from certain sectors or facility categories or mandating the increased use of electricity from renewable energy sources. Similar legislation has been proposed at the federal level. In addition, the EPA has implemented regulations that require permits for and reductions in greenhouse gas emissions for certain categories of emission sources, the most recent of which became effective in August 2012. Pursuant to the terms of a settlement agreement, the EPA is in the process of finalizing greenhouse gas emissions standards, known as NSPS, for new power plants and plans to propose NSPS for existing power plants by June 2014 and finalize them a year later.  The settlement agreement also calls for NSPS for greenhouse gas emissions from oil refineries; however the EPA has not proposed such NSPS to date. NSPS for other oil refinery emissions were issued by the EPA pursuant to the settlement agreement in September 2012 and became effective in November 2012 with minor amendments effective in December 2013. These laws and regulations could negatively impact the market for the products we distribute and, consequently, our business.

In addition, federal, state, local, foreign and provincial laws, regulations and permitting requirements have been adopted or are being considered that could impose more stringent permitting, disclosure, wastewater disposal and well construction requirements on hydraulic fracturing, a practice involving the injection of water containing certain other substances into rock formations (after perforating the formation with explosive charges) to stimulate production of hydrocarbons, particularly natural gas, from shale basin regions. These effective and potential regulations include a variety of well construction, set back, wastewater disposal, emissions, baseline sampling, operational and disclosure requirements limiting how fracturing can be performed and requiring various degrees of disclosures regarding the contents of chemicals injected into the rock formations, as well as moratoria on all hydraulic fracturing activity. Any increased federal, regional or state regulation of hydraulic fracturing could significantly reduce the demand for our products in the high-growth shale regions of the U.S.

We may not have adequate insurance for potential liabilities, including liabilities arising from litigation.

In the ordinary course of business, we have and in the future may become the subject of various claims, lawsuits and administrative proceedings seeking damages or other remedies concerning our commercial operations, the products we distribute, employees and other matters, including potential claims by individuals alleging exposure to hazardous materials as a result of the products we distribute or our operations. Some of these claims may relate to the activities of businesses that we have acquired, even though these activities may have occurred prior to our acquisition of the businesses. The products we distribute are sold primarily for use in the energy industry, which is subject to inherent risks that could result in death, personal injury, property damage, pollution, release of hazardous substances or loss of production. In addition, defects in the products we distribute could result in death, personal injury, property damage, pollution, release of hazardous substances or damage to equipment and facilities. Actual or claimed defects in the products we distribute may give rise to claims against us for losses and expose us to claims for damages.

We maintain insurance to cover certain of our potential losses, and we are subject to various self-retentions, deductibles and caps under our insurance. It is possible, however, that judgments could be rendered against us in cases in which we would be uninsured and beyond the amounts that we currently have reserved or anticipate incurring for these matters. Even a partially uninsured claim, if successful and of significant size, could have a material adverse effect on us. Furthermore, we may not be able to continue to obtain insurance on commercially reasonable terms in the future, and we may incur losses from interruption of our business that exceed our insurance coverage. Even in cases where we maintain insurance coverage, our insurers may raise various objections and exceptions to coverage that could make uncertain the timing and amount of any possible insurance recovery. Finally, while we may have insurance

---

 

coverage, we cannot guarantee that the insurance carrier will have the financial wherewithal to pay a claim otherwise covered by insurance, and as a result we may be responsible for any such claims.

Due to our position as a distributor, we are subject to personal injury, product liability and environmental claims involving allegedly defective products.

Our customers use certain of the products we distribute in potentially hazardous applications that can result in personal injury, product liability and environmental claims. A catastrophic occurrence at a location where end users use the products we distribute may result in us being named as a defendant in lawsuits asserting potentially large claims, even though we did not manufacture the products. Applicable law may render us liable for damages without regard to negligence or fault. In particular, certain environmental laws provide for joint and several and strict liability for remediation of spills and releases of hazardous substances. Certain of these risks are reduced by the fact that we are a distributor of products that third-party manufacturers produce, and, thus, in certain circumstances, we may have third-party warranty or other claims against the manufacturer of products alleged to have been defective. However, there is no assurance that these claims could fully protect us or that the manufacturer would be able financially to provide protection. There is no assurance that our insurance coverage will be adequate to cover the underlying claims. Our insurance does not provide coverage for all liabilities (including liability for certain events involving pollution or other environmental claims).

We are a defendant in asbestos-related lawsuits. Exposure to these and any future lawsuits could have a material adverse effect on us.

We are a defendant in lawsuits involving approximately 930 claims, arising from exposure to asbestos-containing materials included in products that we distributed in the past. Each claim involves allegations of exposure to asbestos-containing materials by a single individual, his or her spouse or family members. The complaints in these lawsuits typically name many other defendants. In the majority of these lawsuits, little or no information is known regarding the nature of the plaintiffs’ alleged injuries or their connection with the products we distributed. Based on our experience with asbestos litigation to date, as well as the existence of certain insurance coverage, we do not believe that the outcome of these pending claims will have a material impact on us. However, the potential liability associated with asbestos claims is subject to many uncertainties, including negative trends with respect to settlement payments, dismissal rates and the types of medical conditions alleged in pending or future claims, negative developments in the claims pending against us, the current or future insolvency of co-defendants, adverse changes in relevant laws or the interpretation of those laws and the extent to which insurance will be available to pay for defense costs, judgments or settlements. Further, while we anticipate that additional claims will be filed against us in the future, we are unable to predict with any certainty the number, timing and magnitude of future claims. Therefore, we can give no assurance that pending or future asbestos litigation will not ultimately have a material adverse effect on us. See “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Contractual Obligations, Commitments and Contingencies—Legal Proceedings” and “Item 3—Legal Proceedings” for more information.

If we lose any of our key personnel, we may be unable to effectively manage our business or continue our growth.

Our future performance depends to a significant degree upon the continued contributions of our management team and our ability to attract, hire, train and retain qualified managerial, sales and marketing personnel. In particular, we rely on our sales and marketing teams to create innovative ways to generate demand for the products we distribute. The loss or unavailability to us of any member of our management team or a key sales or marketing employee could have a material adverse effect on us to the extent we are unable to timely find adequate replacements. We face competition for these professionals from our competitors, our customers and other companies operating in our industry. We may be unsuccessful in attracting, hiring, training and retaining qualified personnel.

Interruptions in the proper functioning of our information systems could disrupt operations and cause increases in costs or decreases in revenues.

The proper functioning of our information systems is critical to the successful operation of our business. We depend on our information management systems to process orders, track credit risk, manage inventory and monitor accounts receivable collections. Our information systems also allow us to efficiently purchase products from our vendors and ship products to our customers on a timely basis, maintain cost-effective operations and provide superior service to our customers. However, our information systems are vulnerable to natural disasters, power losses, telecommunication failures and other problems. If critical information systems fail or are otherwise unavailable, our ability to procure products to sell, process and ship customer orders, identify business opportunities, maintain proper levels of inventories, collect accounts receivable and pay accounts payable and expenses could be adversely affected. In addition, the cost to repair, modify or replace all or part of our information systems or consolidate one or more systems onto one information technology platform, whether by necessity or choice, would require a significant cash investment on the part of the Company. Our ability to integrate our systems with our customers’ systems would also be significantly affected. We maintain information systems controls designed to protect against, among other things, unauthorized program changes and unauthorized access to data on our information systems. If our information systems controls do not function properly, we face increased risks of unexpected errors and unreliable financial data or theft of proprietary Company information.

---

 

The occurrence of cyber incidents, or a deficiency in our cybersecurity, could negatively impact our business by causing a disruption to our operations, a compromise or corruption of our confidential information or damage to our Company’s image, all of which could negatively impact our financial results.

A cyber incident is considered to be any adverse event that threatens the confidentiality, integrity or availability of our information resources. More specifically, a cyber incident is an intentional attack or an unintentional event that can include gaining unauthorized access to systems to disrupt operations, corrupt data or steal confidential information. As our reliance on technology has increased, so have the risks posed to our systems, both internal and those we have outsourced. Our three primary risks that could directly result from the occurrence of a cyber incident include operational interruption, damage to our Company’s reputation and image, and private data exposure. We have implemented solutions, processes, and procedures to help mitigate this risk, but these measures, as well as our organization’s increased awareness of our risk of a cyber incident, do not guarantee that our financial results will not be negatively impacted by such an incident.

The loss of third-party transportation providers upon whom we depend, or conditions negatively affecting the transportation industry, could increase our costs or cause a disruption in our operations.

We depend upon third-party transportation providers for delivery of products to our customers. Strikes, slowdowns, transportation disruptions or other conditions in the transportation industry, including, but not limited to, shortages of truck drivers, disruptions in rail service, increases in fuel prices and adverse weather conditions, could increase our costs and disrupt our operations and our ability to service our customers on a timely basis. We cannot predict whether or to what extent increases or anticipated increases in fuel prices may impact our costs or cause a disruption in our operations going forward.

We may need additional capital in the future, and it may not be available on acceptable terms, or at all.

We may require more capital in the future to:

•fund our operations;

•finance investments in equipment and infrastructure needed to maintain and expand our distribution capabilities;

•enhance and expand the range of products we offer; and

•respond to potential strategic opportunities, such as investments, acquisitions and international expansion.

We can give no assurance that additional financing will be available on terms favorable to us, or at all. The terms of available financing may place limits on our financial and operating flexibility. If adequate funds are not available on acceptable terms, we may be forced to reduce our operations or delay, limit or abandon expansion opportunities. Moreover, even if we are able to continue our operations, the failure to obtain additional financing could reduce our competitiveness.

Adverse weather events or natural disasters could negatively affect our local economies or disrupt our operations.

Certain areas in which we operate are susceptible to adverse weather conditions or natural disasters, such as hurricanes, tornadoes, floods and earthquakes. These events can disrupt our operations, result in damage to our properties and negatively affect the local economies in which we operate. Additionally, we may experience communication disruptions with our customers, vendors and employees. These events can cause physical damage to our branches and require us to close branches. Additionally, our sales order backlog and shipments can experience a temporary decline immediately following these events.

We cannot predict whether or to what extent damage caused by these events will affect our operations or the economies in regions where we operate. These adverse events could result in disruption of our purchasing or distribution capabilities, interruption of our business that exceeds our insurance coverage, our inability to collect from customers and increased operating costs. Our business or results of operations may be adversely affected by these and other negative effects of these events.

We have a substantial amount of goodwill and other intangible assets recorded on our balance sheet, partly because of acquisitions and business combination transactions. The amortization of acquired intangible assets will reduce our future reported earnings. Furthermore, if our goodwill or other intangible assets become impaired, we may be required to recognize charges that would reduce our income.

As of December 31, 2013, we had $1.3 billion of goodwill and other intangibles recorded on our balance sheet. A substantial portion of these intangible assets results from our use of purchase accounting in connection with the acquisitions we have made over the past several years. In accordance with the purchase accounting method, the excess of the cost of an acquisition over the fair value of identifiable tangible and intangible assets is assigned to goodwill. The amortization expense associated with our identifiable intangible assets will have a negative effect on our future reported earnings. Many other companies, including many of our competitors, may not have the significant acquired intangible assets that we have because they may not have participated in recent acquisitions and business combination transactions similar to ours. Thus, the amortization of identifiable intangible assets may not negatively affect their reported earnings to the same degree as ours.

---

 

Additionally, under generally accepted accounting principles, goodwill and certain other long lived intangible assets are not amortized, but must be reviewed for possible impairment annually, or more often in certain circumstances where events indicate that the asset values are not recoverable. These reviews could result in an earnings charge for impairment, which would reduce our net income even though there would be no impact on our underlying cash flow.

We face risks associated with conducting business in markets outside of North America.

We currently conduct substantial business in countries outside of North America. In addition, we are evaluating the possibility of establishing distribution networks in certain other foreign countries, particularly in Europe, Asia, the Middle East and South America. We could be materially and adversely affected by economic, legal, political and regulatory developments in the countries in which we do business in the future or in which we expand our business, particularly those countries which have historically experienced a high degree of political or economic instability. Examples of risks inherent in such non-North American activities include:

•changes in the political and economic conditions in the countries in which we operate, including civil uprisings and terrorist acts;

•unexpected changes in regulatory requirements;

•changes in tariffs;

•the adoption of foreign or domestic laws limiting exports to or imports from certain foreign countries;

•fluctuations in currency exchange rates and the value of the U.S. dollar;

•restrictions on repatriation of earnings;

•expropriation of property without fair compensation;

•governmental actions that result in the deprivation of contract or proprietary rights; and

•the acceptance of business practices which are not consistent with or are antithetical to prevailing business practices we are accustomed to in North America including export compliance and anti-bribery practices and governmental sanctions.

If we begin doing business in a foreign country in which we do not presently operate, we may also face difficulties in operations and diversion of management time in connection with establishing our business there.

We are subject to U.S. and other anti-corruption laws, trade controls, economic sanctions, and similar laws and regulations, including those in the jurisdictions where we operate. Our failure to comply with these laws and regulations could subject us to civil, criminal and administrative penalties and harm our reputation.

Doing business on a worldwide basis requires us to comply with the laws and regulations of the U.S. government and various foreign jurisdictions. These laws and regulations place restrictions on our operations, trade practices, partners and investment decisions. In particular, our operations are subject to U.S. and foreign anti-corruption and trade control laws and regulations, such as the Foreign Corrupt Practices Act (“FCPA”), export controls and economic sanctions programs, including those administered by the U.S. Treasury Department’s Office of Foreign Assets Control (“OFAC”). As a result of doing business in foreign countries and with foreign partners, we are exposed to a heightened risk of violating anti-corruption and trade control laws and sanctions regulations.

The FCPA prohibits us from providing anything of value to foreign officials for the purposes of obtaining or retaining business or securing any improper business advantage. It also requires us to keep books and records that accurately and fairly reflect the Company’s transactions. As part of our business, we may deal with state-owned business enterprises, the employees of which are considered foreign officials for purposes of the FCPA. In addition, the provisions of the United Kingdom Bribery Act (the “Bribery Act”) extend beyond bribery of foreign public officials and also apply to transactions with individuals that a government does not employ. The provisions of the Bribery Act are also more onerous than the FCPA in a number of other respects, including jurisdiction, non-exemption of facilitation payments and penalties. Some of the international locations in which we operate lack a developed legal system and have higher than normal levels of corruption. Our continued expansion outside the U.S., including in developing countries, and our development of new partnerships and joint venture relationships worldwide, could increase the risk of FCPA, OFAC or Bribery Act violations in the future.

Economic sanctions programs restrict our business dealings with certain sanctioned countries, persons and entities. In addition, because we act as a distributor, we face the risk that our customers might further distribute our products to a sanctioned person or entity, or an ultimate end-user in a sanctioned country, which might subject us to an investigation concerning compliance with OFAC or other sanctions regulations.

Violations of anti-corruption and trade control laws and sanctions regulations are punishable by civil penalties, including fines, denial of export privileges, injunctions, asset seizures, debarment from government contracts and revocations or restrictions of licenses, as well as criminal fines and imprisonment. We have established policies and procedures designed to assist our compliance with applicable U.S. and international anti-corruption and trade control laws and regulations, including the FCPA, the Bribery Act and

---

 

trade controls and sanctions programs administered by OFAC, and have trained our employees to comply with these laws and regulations. However, there can be no assurance that all of our employees, consultants, agents or other associated persons will not take actions in violation of our policies and these laws and regulations, and that our policies and procedures will effectively prevent us from violating these regulations in every transaction in which we may engage or provide a defense to any alleged violation. In particular, we may be held liable for the actions that our local, strategic or joint venture partners take inside or outside of the United States, even though our partners may not be subject to these laws. Such a violation, even if our policies prohibit it, could have a material adverse effect on our reputation, business, financial condition and results of operations. In addition, various state and municipal governments, universities and other investors maintain prohibitions or restrictions on investments in companies that do business with sanctioned countries, persons and entities, which could adversely affect the market for our common stock and other securities.

We face risks associated with international instability and geopolitical developments.

In some countries, there is an increased chance for economic, legal or political changes that may adversely affect the performance of our services, sale of our products or repatriation of our profits. We do not know the impact that these regulatory, geopolitical and other factors may have on our business in the future and any of these factors could adversely affect us.

We are exposed to risks relating to evaluations of controls required by Section 404 of the Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”).

Section 404 of the Sarbanes-Oxley Act requires us to annually evaluate our internal controls systems to allow management to report on, and our independent auditors to audit, our internal controls over financial reporting. This is not a static process as we change our processes each year or acquire new companies that have different controls than our controls. Upon completion of this process each year, we may identify control deficiencies of varying degrees of severity under applicable U.S. Securities and Exchange Commission (“SEC”) and Public Company Accounting Oversight Board (“PCAOB”) rules and regulations that remain unremediated. We are required to report, among other things, control deficiencies that constitute a “material weakness” or changes in internal controls that, or that are reasonably likely to, materially affect internal controls over financial reporting. A “material weakness” is a significant deficiency or combination of significant deficiencies in internal control over financial reporting that results in a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected and corrected on a timely basis.

We could suffer a loss of confidence in the reliability of our financial statements if we or our independent registered public accounting firm reports a material weakness in our internal controls, if we do not develop and maintain effective controls and procedures or if we are otherwise unable to deliver timely and reliable financial information. Any loss of confidence in the reliability of our financial statements or other negative reaction to our failure to develop timely or adequate disclosure controls and procedures or internal controls could result in a decline in the price of our common stock. In addition, if we fail to remedy any material weakness, our financial statements may be inaccurate, we may face restricted access to the capital markets and our stock price may be adversely affected.

The SEC’s move toward a single set of international accounting standards could materially impact our results of operations.

The SEC continues to review the possibility of convergence to a single set of international accounting standards (such as International Financial Reporting Standards (“IFRS”)). The associated changes in regulatory accounting may negatively impact the way we record revenues, expenses, assets and liabilities. Currently, under IFRS, the last in, first out (“LIFO”) method of valuing inventory is not permitted. If we had ceased valuing our inventory under the LIFO method at December 31, 2013, we would have been required to make tax payments approximating $129.8 million over the subsequent four years.

We do not currently intend to pay dividends in the foreseeable future.

It is uncertain when, if ever, we will declare dividends to our stockholders. We do not currently intend to pay dividends in the foreseeable future. Our ability to pay dividends is constrained by our holding company structure under which we are dependent on our subsidiaries for payments. Additionally, we and our subsidiaries are parties to credit agreements which restrict our ability and their ability to pay dividends. See “Item 5—Market for the Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities” and “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources”.

Compliance with and changes in laws and regulations in the countries in which we operate could have a significant financial impact and affect how and where we conduct our operations.

We have operations in the U.S. and in 19 countries that can be impacted by expected and unexpected changes in the business and legal environments in the countries in which we operate. Compliance with and changes in laws, regulations, and other legal and business issues could impact our ability to manage our costs and to meet our earnings goals. Compliance related matters could also limit our

---

 

ability to do business in certain countries. Changes that could have a significant cost to us include new legislation, new regulations, or a differing interpretation of existing laws and regulations, changes in tax law or tax rates, the unfavorable resolution of tax assessments or audits by various taxing authorities, the expansion of currency exchange controls, export controls or additional restrictions on doing business in countries subject to sanctions in which we operate or intend to operate.

ITEM 1B. UNRESOLVED STAFF COMMENTS 

Not applicable.

ITEM  2.PROPERTIES

In North America, we operate a modified hub and spoke model that is centered around our nine distribution centers in the U.S and Canada with more than 170 branch locations which have inventory and local employees. Our U.S. network is comprised of over 130 branch locations and 8 distribution centers. We own our Charleston, WV corporate office and our Nitro, WV and Houston, TX (Darien Street) distribution centers and lease the remaining six distribution centers. In Canada, we have over 40 branch locations and we own our one distribution center in Nisku, Alberta, Canada. We own less than 15% of our branch locations as we primarily lease the facilities.

Outside North America, we operate through a network of over 55 branch locations located throughout Europe, Asia, Australasia and the Middle East, including six distribution centers in each of the United Kingdom, Norway, Singapore, the Netherlands and Australia. We also maintain an operations center for our international operations in Bradford, United Kingdom. We own our Brussels, Belgium location and the remainder of our locations are leased.

Our Company maintains its principal executive office at 2 Houston Center, 909 Fannin Street, Suite 3100, Houston, Texas, 77010 and also maintains corporate offices in Charleston, WV, and in Tulsa, OK. All three locations have corporate functions such as accounting, human resources, legal and information technology. We also maintain operations centers for our Canadian operations in Calgary, Alberta and for our international operations in Bradford, United Kingdom.

ITEM  3.LEGAL PROCEEDINGS 

From time to time, we have been subject to various claims and involved in legal proceedings incidental to the nature of our businesses. We maintain insurance coverage to reduce financial risk associated with certain of these claims and proceedings. It is not possible to predict the outcome of these claims and proceedings. However, in our opinion, there are no material pending legal proceedings that upon resolution are likely to have a material effect on our business, financial condition, results of operations or cash flows.

Also, from time to time, in the ordinary course of our business, our customers may claim that the products that we distribute are either defective or require repair or replacement under warranties that either we or the manufacturer may provide to the customer. These proceedings are, in the opinion of management, ordinary and routine matters incidental to our normal business. Our purchase orders with our suppliers generally require the manufacturer to indemnify us against any product liability claims, leaving the manufacturer ultimately responsible for these claims. In many cases, state, provincial or foreign law provides protection to distributors for these sorts of claims, shifting the responsibility to the manufacturer. In some cases, we could be required to repair or replace the products for the benefit of our customer and seek our recovery from the manufacturer for our expense. In the opinion of management, the ultimate disposition of these claims and proceedings are not expected to have a material adverse effect on our financial position, results of operations or cash flows.

For information regarding asbestos cases in which we are a defendant and other claims and proceedings, see “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations—Contractual Obligations, Commitments and Contingencies—Legal Proceedings” and “Note 15—Commitments and Contingencies” to our audited consolidated financial statements included elsewhere in this report.

ITEM  4.MINE SAFETY DISCLOSURES 

Not applicable.  

---

 

EXECUTIVE OFFICERS OF THE REGISTRANT 

The name, age, period of service and the title of each of our executive officers as of February 21, 2014 are listed below.

Andrew R. Lane, age 54, has served as our president and chief executive officer (“CEO”) since September 2008 and our chairman of the board since December 2009. He has also served as a director of MRC Global Inc. since September 2008. From December 2004 to December 2007, he served as executive vice president and chief operating officer of Halliburton Company, where he was responsible for Halliburton’s overall operational performance. Prior to that, he held a variety of leadership roles within Halliburton. Mr. Lane received a B.S. in mechanical engineering from Southern Methodist University in 1981 (cum laude). He also completed the Advanced Management Program (A.M.P.) at Harvard Business School in 2000.

James E. Braun, age 54, has served as our executive vice president and chief financial officer since November 2011. Prior to joining the Company, Mr. Braun served as chief financial officer of Newpark Resources, Inc. since 2006. Newpark provides drilling fluids and other products and services to the oil and gas exploration and production industry, both inside and outside of the U.S. Before joining Newpark, Mr. Braun held a variety of leadership positions with Baker Hughes Incorporated, a leading provider of drilling, formation evaluation, completion and production products and services to the worldwide oil and gas industry. Mr. Braun is a CPA and was formerly a partner with Deloitte & Touche. Mr. Braun received a B.A. in accounting from the University of Illinois at Urbana-Champaign.

Daniel J. Churay, age 51, has served as our executive vice president corporate affairs, general counsel and corporate secretary since May 2012. In his current role, Mr. Churay manages the Company’s human resources, legal, risk and compliance, external and government affairs and certain shared services functions. He also acts as corporate secretary to the Company’s board of directors. Prior to May 2012, Mr. Churay served as executive vice president and general counsel since August 2011 and as our corporate secretary since November 2011. From December 2010 to June 2011, he served as president and CEO of Rex Energy Corporation, an independent oil and gas company. From September 2002 to December 2010, Mr. Churay served as executive vice president, general counsel and secretary of YRC Worldwide Inc., a transportation and logistics company. Mr. Churay received a bachelor’s degree in economics from the University of Texas and a juris doctorate from the University of Houston Law Center, where he was a member of the Law Review.

Gary A. Ittner, age 61, has served as executive vice president of supply chain management since August 2013.  Prior to this role, he served as executive vice president of corporate strategy, mergers and acquisitions since September 2012. From September 2010 to May 2012, he served as our executive vice president of global supply chain management and as our chief administrative officer. Prior to that, he served as our executive vice president—supply chain management from October 2008 to September 2010.  Mr. Ittner began working at MRC in 1971 following his freshman year at the University of Cincinnati and joined MRC full-time following his graduation in 1974.

Rory M. Isaac, age 63, has served as executive vice president – international operations since July 2013.  Mr. Isaac has served as executive vice president of corporate strategy, mergers and acquisitions from September 2012 to June 2013. Prior to this role, Mr. Isaac served as the executive vice president of global business development since December 2008. Prior to December 2008, he served in a variety of leadership positions within the Company since 1981.  Mr. Isaac attended the Citadel.

Alan Colonna, age 56, has served as our executive vice president of global business development and U.S. operations since August 2013.  Prior to this role, he served as our executive vice president of global business development and supply chain management since September 2012. From 2009 through September 2012, he served as the senior regional vice president of the Gulf Coast U.S. region. Prior to that he held a variety of leadership and operational positions with the Company. Mr. Colonna graduated from Cal Poly San Luis Obispo, California in 1982. 

 

---

 

PART II

ITEM  5.MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES 

MRC Global Inc.  common stock began trading on the New York Stock Exchange on April 12, 2012 following an initial public offering at a price of $21.00 which subsequently closed on April 17, 2012. The following table illustrates the high and low sales prices for the subsequent quarters.

 

 

As of February 5, 2014, there were 250 holders of record of the Company’s common stock.

Our board of directors has not declared any dividends during 2012 or 2013 and currently has no intention to declare any dividends.

McJunkin Red Man Corporation’s Global ABL Facility and Term Loan restrict our ability to declare cash dividends. Any future dividends declared would be at the discretion of our board of directors and would depend on our financial condition, results of operations, cash flows, contractual obligations, the terms of our financing agreements at the time a dividend is considered, and other relevant factors.

 

---

 

PERFORMANCE GRAPH

The graph below compares the cumulative total shareholder return on our common stock to the S&P 500 Index and the Dow Jones U.S. Industrial Suppliers Index. The total shareholder return assumes $100 invested on April 12, 2012, the date our stock first traded following our initial public offering, in MRC Global Inc., the S&P 500 Index and the Dow Jones U.S. Industrial Suppliers Index. It also assumes reinvestment of all dividends. The results shown in the graph below are not necessarily indicative of future performance.

Comparison of Cumulative Total Return

 

This information shall not be deemed to be ‘‘soliciting material’’ or to be ‘‘filed’’ with the SEC or subject to Regulation 14A (17 CFR 240.14a-1-240.14a-104), other than as provided in Item 201(e) of Regulation S-K, or to the liabilities of Section 18 of the Exchange Act (15 U.S.C. 78r).

 

---

 

ITEM 6. SELECTED FINANCIAL DATA 

The selected financial data presented below have been derived from the consolidated financial statements of MRC Global Inc. that have been prepared using accounting principles generally accepted in the United States of America which have been audited by Ernst & Young LLP, our independent registered public accounting firm. This data should be read in conjunction with “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements, related notes and other financial information included elsewhere in this report.  

 

 

 

(1)Working capital is defined as current assets less current liabilities.

(2)Includes current portion of long-term debt.  

---

 

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS 

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with our financial statements and related notes included elsewhere in this report. This discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a number of factors, including, but not limited to, those set forth under “Cautionary Note Regarding Forward-Looking Statements” and “Item 1A—Risk Factors” and elsewhere in this report. All references throughout this section (and elsewhere in this report) to amounts available for borrowing under various credit facilities refer to amounts actually available for borrowing after giving effect to any borrowing base limitations that each facility imposes.  

Cautionary Note Regarding Forward-Looking Statements

Management’s Discussion and Analysis of Financial Condition and Results of Operations (as well as other sections of this Annual Report on Form 10-K) contain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”).  Forward-looking statements include those preceded by, followed by or including the words “will,” “expect,” “intended,” “anticipated,” “believe,” “project,” “forecast,” “propose,” “plan,” “estimate,” “enable,” and similar expressions, including, for example, statements about our business strategy, our industry, our future profitability, growth in the industry sectors we serve, our expectations, beliefs, plans, strategies, objectives, prospects and assumptions, and estimates and projections of future activity and trends in the oil and natural gas industry. These forward-looking statements are not guarantees of future performance. These statements are based on management’s expectations that involve a number of business risks and uncertainties, any of which could cause actual results to differ materially from those expressed in or implied by the forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors, most of which are difficult to predict and many of which are beyond our control, including the factors described under “Item 1A - Risk Factors”, that may cause our actual results and performance to be materially different from any future results or performance expressed or implied by these forward-looking statements. Such risks and uncertainties include, among other things: 

•decreases in oil and natural gas industry expenditure levels, which may result from decreased oil and natural gas prices or other factors;

•increased usage of alternative fuels, which may negatively affect oil and natural gas industry expenditure levels;

•decreases in oil and natural gas prices;

•U.S. and international general economic conditions;

•our ability to compete successfully with other companies in our industry;

•the risk that manufacturers of the products we distribute will sell a substantial amount of goods directly to end users in the industry sectors we serve;

•unexpected supply shortages;

•cost increases by our suppliers;

•our lack of long-term contracts with most of our suppliers; 

•suppliers’ price reductions of products that we sell, which could cause the value of our inventory to decline;

•decreases in steel prices, which could significantly lower our profit;

•increases in steel prices, which we may be unable to pass along to our customers which could significantly lower our profit;

•our lack of long-term contracts with many of our customers and our lack of contracts with customers that require minimum purchase volumes;

•changes in our customer and product mix;

•risks related to our customers’ creditworthiness;

•the success of our acquisition strategies;

•the potential adverse effects associated with integrating acquisitions into our business and whether these acquisitions will yield their intended benefits;

•our significant indebtedness;

•the dependence on our subsidiaries for cash to meet our debt obligations;

•changes in our credit profile;

---

 

•a decline in demand for certain of the products we distribute if import restrictions on these products are lifted;

•environmental, health and safety laws and regulations and the interpretation or implementation thereof;

•the sufficiency of our insurance policies to cover losses, including liabilities arising from litigation;

•product liability claims against us;

•pending or future asbestos-related claims against us;

•the potential loss of key personnel;

•interruption in the proper functioning of our information systems;

•loss of third-party transportation providers;

•potential inability to obtain necessary capital;

•risks related to adverse weather events or natural disasters;

•impairment of our goodwill or other intangible assets;

•adverse changes in political or economic conditions in the countries in which we operate;

•exposure to U.S. and international laws and regulations, including the Foreign Corrupt Practices Act and the U.K. Bribery Act and other economic sanctions programs;

•risks relating to ongoing evaluations of internal controls required by Section 404 of the Sarbanes-Oxley Act; 

•the impact on us of the SEC’s move toward convergence with IFRS;

•our intention not to pay dividends; and

•the occurrence of cybersecurity incidents.

Undue reliance should not be placed on our forward-looking statements. Although forward-looking statements reflect our good faith beliefs, reliance should not be placed on forward-looking statements because they involve known and unknown risks, uncertainties and other factors, which may cause our actual results, performance or achievements to differ materially from anticipated future results, performance or achievements expressed or implied by such forward-looking statements. We undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events, changed circumstances or otherwise, except to the extent law requires.

Overview

We are the largest global industrial distributor, based on sales, of PVF and related products and services to the energy industry and hold a leading position in our industry across each of the upstream (exploration, production and extraction of underground oil and natural gas), midstream (gathering and transmission of oil and natural gas, natural gas utilities and the storage and distribution of oil and natural gas) and downstream (crude oil refining, petrochemical and chemical, processing and general industrials) sectors. Our business is segregated into three geographical segments consisting of our U.S., Canadian, and International operations. We serve our customers in over 400 service locations. We offer a wide array of PVF and oilfield supplies encompassing a complete line of products from our global network of suppliers to our more than 19,000 customers. We are diversified by geography, the industry sectors we serve and the products we sell. We seek to provide best-in-class service to our customers by satisfying the most complex, multi-site needs of many of the largest companies in the energy and industrial sectors as their primary PVF supplier. We believe the critical role we play in our customers’ supply chain, together with our extensive product offering, broad global presence, customer-linked scalable information systems and efficient distribution capabilities, serve to solidify our long-standing customer relationships and drive our growth. As a result, we have an average relationship of over 20 years with our 25 largest customers.

Key Drivers of Our Business

Our revenues are predominantly derived from the sale of PVF and other oilfield and industrial supplies to the energy sector in North America, Europe, Asia and Australasia. Our business is therefore dependent upon both the current conditions and future prospects in the energy industry and, in particular, maintenance and expansionary operating and capital expenditures by our customers in the upstream, midstream and downstream sectors of the industry. Long-term growth in spending has been, and we believe will continue to be, driven by several factors, including underinvestment in global energy infrastructure, growth in shale and unconventional exploration and production (“E&P”) activity, and anticipated strength in the oil, natural gas, refined products, petrochemical and other industrial sectors. The outlook for future oil, natural gas, refined products, petrochemical and other industrial PVF spending is influenced by numerous factors, including the following:

•Oil and Natural Gas Prices. Sales of PVF and related products to the oil and natural gas industry constitute a significant portion of our sales. As a result, we depend upon the oil and natural gas industry and its ability and willingness to make maintenance and capital expenditures to explore for, produce and process oil and natural gas and refined products. Oil and

---

 

natural gas prices, both current and projected, along with the costs necessary to produce oil and gas, impact other drivers of our business, including E&P spending, additions and maintenance to pipeline mileage, refinery utilization and petrochemical and other industrial processing activity.

•Economic Conditions. The demand for the products we distribute is dependent on the general economy, the energy and industrials sectors and other factors. Changes in the general economy or in the energy and industrials sectors (domestically or internationally) can cause demand for the products we distribute to materially change.

•Customer, Manufacturer and Distributor Inventory Levels of PVF and Related Products. Customer, manufacturer and distributor inventory levels of PVF and related products can change significantly from period to period. Increases in our customers’ inventory levels can have an adverse effect on the demand for the products we distribute when customers draw from their inventory rather than purchase new products. Reduced demand, in turn, would likely result in reduced sales volume and profitability. Increased inventory levels by manufacturers or other distributors can cause an oversupply of PVF and related products in the industry sectors we serve and reduce the prices that we are able to charge for the products we distribute. Reduced prices, in turn, would likely reduce our profitability. Conversely, decreased customer and manufacturer inventory levels may ultimately lead to increased demand for our products and would likely result in increased sales volumes and overall profitability.

•  Steel Prices, Availability and Supply and Demand. Fluctuations in steel prices can lead to volatility in the pricing of the products we distribute, especially carbon steel tubular products, which can influence the buying patterns of our customers. A majority of the products we distribute contain various types of steel. The worldwide supply and demand for these products, or other steel products that we do not supply, impacts the pricing and availability of our products and, ultimately, our sales and operating profitability.

Recent Trends and Outlook

During  2013, the average oil price of West Texas Intermediate (“WTI”) was relatively stable at $97.78 compared to $94.05 per barrel in 2012.  Despite the relative strength of oil prices, U.S. drilling activity decreased 8% in 2013 as compared to 2012. Natural gas prices increased to an average price of $3.73/Mcf (Henry Hub) for 2013 compared to $2.75/Mcf (Henry Hub) for 2012.  However, the current price has increased to approximately $5.00/Mcf (Henry Hub).  Rig activity continues to be heavily weighted toward oil relative to natural gas, with oil drilling representing 78% of the total U.S. rig count during 2013 compared to 71% for 2012.  Because of the increased natural gas pricing, we anticipate this trend could start to reverse modestly in 2014.

In 2013, we completed our strategic initiative to focus on our higher margin product lines and reduce exposure to the oil country tubular goods (“OCTG”) business.  As a result of this strategy, OCTG represented only 9% of total sales in 2013 compared to 13% in 2012.  The impact of this rebalancing effort was to reduce our OCTG sales by $251 million in 2013 as compared to 2012. 

In July 2013, we completed the acquisition of Dan H. Brown, Inc. d/b/a Flow Control Products (“Flow Control”).  Flow Control is a leading provider in pneumatic and electro-hydraulic valve automation packages and related field support to the Permian Basin.  We are expanding our existing facility in Odessa, Texas, into a 110,000 square foot regional distribution center.  When completed in 2014, the Flow Control business will begin to operate from this newly expanded facility.

Internationally, we have transformed our business through two recent acquisitions, Stream AS (“Stream”), a $260 million acquisition, in January 2014 and Flangefitt Stainless Ltd. (“Flangefitt”) in December 2013.  Stream, headquartered in Norway, is the leading PVF distributor and provider of flow control products, solutions and services to the offshore and oil and gas industry on the Norwegian Continental Shelf (“NCS”), the world’s largest offshore sector.  The Stream acquisition provides a platform for growth in offshore applications where our major customers have been very active.  Flangefitt, headquartered in Warrington, England, with a location in Aberdeen, Scotland is a leading PFF distributor to the oil and gas industry.   The Flangefitt acquisition complements our existing U.K. based, MRC Transmark valve business as well as the Stream Energy Piping business.  Both acquisitions provide a full range of PVF to serve both of the NCS and the U.K. Continental Shelf sectors as well as global projects with high-end alloy PFF requirements. 

In January 2014, we terminated a profit sharing agreement with respect to certain oilfield supply and service stores in western Canada.  This profit sharing agreement required us to make annual profit sharing payments to Europump Systems, Inc. (“Europump”) related to PVF sales in the heavy oil region of Canada.  In conjunction with the termination of this agreement, we sold our progressive cavity pump (“PCP”) distribution and servicing business to Europump, our primary supplier of PCP pumps. We believe this divestiture will allow us to focus on our core business of supplying PVF products and services to the energy and industrial markets.  We expect the impact of this divestiture to be a reduction in sales of approximately $82 million in 2014; however, through the elimination of costs associated with the business, including the profit sharing payments to Europump, we expect the impact of the sale will have a modestly accretive impact on profitability going forward.  However, we do anticipate a first quarter 2014 pre-tax charge of approximately $7 million ($4.6 million after-tax) associated with the termination of the profit sharing agreement.

---

 

We determine backlog by the amount of unshipped customer orders, either specific or general in nature (including orders held under pipe programs), which the customer may revise or cancel in certain instances.  Our backlog at December 31, 2013 was $758 million including $470 million, $90 million and $198 million in our US, Canadian and International segments, respectively. Our backlog at December 31, 2012 was $664 million including $455 million, $62 million and $147 million in our US, Canadian and International segments, respectively. There can be no assurance that the backlog amounts will ultimately be realized as revenue or that we will earn a profit on the backlog of orders, but we expect that substantially all of the sales in our backlog will be realized in 2014.

There have been several recent changes in the competitive landscape.  In September, National Oilwell Varco, Inc. announced plans to spin off its distribution business as a separate standalone public company (DistributionNOW).  In addition, Marubeni-Itochu, a venture between two of Japan’s largest trading houses, agreed to buy Sooner, Inc., the largest U.S. distributor of pipe and tubing (OCTG) for the oil and gas industry.  Finally, in November, Sumitomo, a large Japanese conglomerate, acquired Edgen Group, further expanding Sumitomo’s global presence in the upstream, midstream and downstream sectors.

The following table shows key industry indicators for the years ended December 31, 2013, 2012 and 2011:

 

---

 

 

 

Results of Operations for the years ended December 31, 2013, 2012 and 2011

The breakdown of our sales by sector for the years ended December 31, 2013, 2012 and 2011 was as follows (in millions):

 

 

Year Ended December 31, 2013 Compared to the Year Ended December 31, 2012

For the years ended December 31, 2013 and 2012 the following table summarizes our results of operations (in millions):

 

 

(1)Adjusted Gross Profit and Adjusted EBITDA are non-GAAP financial measures. For a reconciliation of these measures to an equivalent GAAP measure, see pages 28-30 herein.

Sales. Sales include the revenue recognized from the sales of the products we distribute, services to customers and freight billings to customers, less cash discounts taken by customers in return for their early payment of our invoices to them. Our sales were $5,230.8 million for the year ended December 31, 2013 as compared to $5,570.8 million for the year ended December 31, 2012.

U.S. Segment—Our U.S. sales decreased $270.8 million to $3,967.6 million for 2013 from $4,238.4 million for 2012. The 6% decrease reflected a planned $273 million reduction in OCTG sales resulting from our strategy to rebalance our sales and inventories away from this more volatile, lower margin portion of our business.  In addition, our line pipe sales declined $78 million as a result of our upstream and midstream customers’ decreased spending in 2013.  Our 2013 sales benefitted from the June and December 2012 and July 2013 acquisitions of the business of Chaparral Supply LLC, Production Specialty Services (“PSS”) and Flow Control which collectively contributed an incremental $160 million of sales.  The remaining decrease was driven by lower capital spending by our customers during 2013. 

---

 

Canadian Segment—Our Canadian sales decreased $55.8 million to $709.4 million for 2013 from $765.2 million for 2012. Over one-third of the overall 7% decrease was the result of a decline in the Canadian dollar relative to the U.S. dollar.  The remainder of the 7% decrease was due to a longer than normal spring break-up as well as a decline in project sales particularly in the tar sands region of northern Alberta. 

International Segment—Our International sales decreased $13.4 million to $553.8 million for 2013 from $567.2 million for 2012. The March 2012 and December 2013 acquisitions of the Piping Systems division of OneSteel (“MRC PSA”) and Flangefitt Stainless Ltd accounted for $29 million in incremental revenues.  Excluding the impact of these acquisitions, sales declined $43 million, or 8%, reflecting weaker demand particularly in parts of Australia where we experienced reduced customer spending in the mining and oil and gas sectors.  Over 40% of this $43 million decrease was a result of a decrease in the Australian dollar relative to the U.S. dollar.

Gross Profit. Our gross profit was $954.8 million (18.3% of sales) for the year ended December 31, 2013 as compared to $1,013.7 million (18.2% of sales) for the year ended December 31, 2012. The decrease in gross profit dollars was driven by the decrease in sales discussed above.

Certain purchasing costs and warehousing activities (including receiving, inspection, and stocking costs), as well as general warehousing expenses, are included in selling, general and administrative expenses and not in cost of sales. As such, our gross profit may not be comparable to others who may include these expenses as a component of costs of goods sold. Purchasing and warehousing activities costs approximated $37.2 million and $34.8 million for the years ended December 31, 2013 and 2012, respectively.  

Adjusted Gross Profit. Adjusted Gross Profit decreased to $1,009.0 million (19.3% of sales) for 2013 from $1,057.7 million (19.0% of sales) for 2012, a decrease of $48.7 million. Adjusted Gross Profit is a non-GAAP financial measure. We define Adjusted Gross Profit as sales, less cost of sales, plus depreciation and amortization, plus amortization of intangibles, and plus or minus the impact of our last-in, first-out (“LIFO”) inventory costing methodology. We present Adjusted Gross Profit because we believe it is a useful indicator of our operating performance without regard to items, such as amortization of intangibles, that can vary substantially from company to company depending upon the nature and extent of acquisitions they have been involved in. Similarly, the impact of the LIFO inventory costing method can cause results to vary substantially from company to company depending upon whether they elect to utilize the LIFO method and depending upon which method they may elect. In particular, we believe that Adjusted Gross Profit is a useful indicator of our operating performance because Adjusted Gross Profit measures our Company’s operating performance without regard to acquisition transaction-related amortization expenses. We use Adjusted Gross Profit as a key performance indicator in managing our business. We believe that gross profit is the financial measure calculated and presented in accordance with U.S. generally accepted accounting principles that is most directly comparable to Adjusted Gross Profit.

The following table reconciles Adjusted Gross Profit with our gross profit, as derived from our financial statements (in millions):

 

 

 

Selling, General and Administrative (“SG&A”) Expenses. Costs such as salaries, wages, employee benefits, rent, utilities, communications, insurance, fuel and taxes (other than state and federal income taxes) that are necessary to operate our branch and corporate operations are included in selling, general and administrative expenses. Also contained in this category are certain items that are nonoperational in nature, including certain costs of acquiring and integrating other businesses. Our SG&A expenses were $643.0 million (12.3% of sales) for the year ended December 31, 2013 as compared to $606.7 million (10.9% of sales) for the year ended December 31, 2012.  Approximately $24 million of the $36 million increase was attributable to the incremental SG&A expenses of our March and December 2012 and July 2013 acquisitions of MRC PSA, PSS and Flow Control.  Our 2013 SG&A also reflects $5 million of expenses associated with the accelerated recognition of stock based compensation triggered by the November 2013 sale of common stock by our private equity sponsor, as well as,  a $2 million charge related to the separation of an executive officer, and expenses incurred in the integration of our Australian business.

Operating Income. Operating income was $311.8 million for the year ended December 31, 2013, as compared to operating income of $407.0 million for the year ended December 31, 2012, a decrease of $95.2 million.

---

 

U.S. Segment—Operating income for our U.S. segment decreased to $280.1 million for 2013 from $358.3 million for 2012. The decline of $78.2 million was driven by a decrease in sales combined with  an increase in SG&A expenses associated with our acquisitions of PSS and Flow Control.

Canadian Segment—Operating income for our Canadian segment decreased to $20.9 million for 2013 from $27.2 million for 2012. The decline of $6.3 million was driven by a decrease in sales offset, in part, by a corresponding decrease in SG&A expenses.

International Segment—Operating income for our International segment decreased to $10.8 million for 2013 from $21.5 million in 2012. The $10.7 million decline was driven by a decline in sales as well as an increase in SG&A expenses, including costs incurred in the integration of our Australian operations.  

Interest Expense. Our interest expense was $60.7 million for the year ended December 31, 2013 as compared to $112.5 million for the year ended December 31, 2012. The decrease in interest expense was due to the November 2012 redemption of our 9.5% senior secured notes, which was funded by borrowings on our lower cost Term Loan B and revolving credit facilities as well as the November 2013 Term Loan re-pricing.  We also benefitted from an outstanding debt balance that was lower, on average in 2013 by approximately $278 million as compared to 2012.

Other Income (Expense). During November 2013, we incurred expenses of $5.1 million related to the re-pricing of our Term Loan B.  In addition, we recognized $12.9 million of foreign currency losses due primarily to the weaker Australian and Canadian dollars as compared to the U.S. dollar.  These losses were offset by gains on derivative transactions of $4.7 million.  During 2012, in various transactions, we purchased $188.7 million of our senior secured notes in the open market. In November 2012, we redeemed the remaining $861.3 million of senior secured notes outstanding. The purchase and redemption of the senior secured notes resulted in a loss on the early extinguishment of debt of $114.0 million. In March 2012, we refinanced certain of our credit facilities. As a result of their termination, we wrote off and expensed $1.7 million in debt issuance costs.  In December 2012, we incurred $4.4 million of expense when we terminated a defined benefit pension plan in the Netherlands.

Income Tax Expense. Our income tax expense was $84.8 million for the year ended December 31, 2013, as compared to $63.7 million for the year ended December 31, 2012. Our effective tax rates were 35.8% and 35.1% for the years ended December 31, 2013 and 2012, respectively. These rates generally differ from the federal statutory rate of 35% principally as a result of different tax rates in foreign tax jurisdictions and certain deductions and credits allowable for income tax purposes, partially offset by state and local income taxes and increases to the valuation allowance on our deferred tax assets. 

During 2013 we increased the deferred tax liability on our existing temporary differences by $3.1 million to recognize a higher rate at which we expect deferred taxes in certain U.S. states to be realized.  Additionally, as a result of cumulative losses incurred over the three year period ended December 31, 2013 in certain of our foreign jurisdictions, a valuation allowance of $7.7 million has been recorded in order to measure only the portion of deferred tax assets that more likely than not will be realized.

 Net Income. Our net income was $152.1 million for the year ended December 31, 2013 as compared to net income of $118.0 million for the year ended December 31, 2012, an increase of $34.1 million.

Adjusted EBITDA. We define Adjusted EBITDA as net income plus interest, income taxes, depreciation and amortization, amortization of intangibles and certain other expenses (such as gains/losses on the early extinguishment of debt, changes in the fair value of derivative instruments and goodwill impairment) and plus or minus the impact of our LIFO inventory costing methodology. Adjusted EBITDA, a non-GAAP financial measure, was $386.4 million for the year ended December 31, 2013, as compared to $463.2 million for the year ended December 31, 2012. Our Adjusted EBITDA decreased $76.8 million over that period primarily due to the decrease in gross profit and other factors noted above.

We believe adjusted EBITDA provides investors a helpful measure for comparing our operating performance with the performance of other companies that have different financing and capital structures or tax rates. We believe that net income is the financial measure calculated and presented in accordance with U.S. generally accepted accounting principles that is most directly comparable to Adjusted EBITDA.

---

 

The following table reconciles Adjusted EBITDA with our net income, as derived from our financial statements (in millions):

 

 

Year Ended December 31, 2012 Compared to the Year Ended December 31, 2011

For the years ended December 31, 2012 and 2011 the following table summarizes our results of operations (in millions):

 

 

(1)Adjusted Gross Profit and Adjusted EBITDA are non-GAAP financial measures. For a reconciliation of these measures to an equivalent GAAP measure, see pages 31-33 herein.

Sales. Sales include the revenue recognized from the sales of the products we distribute, services to customers and freight billings to customers, less cash discounts taken by customers in return for their early payment of our invoices to them. Our sales were $5,570.8 million for the year ended December 31, 2012 as compared to $4,832.4 million for the year ended December 31, 2011.

---

 

U.S. Segment—Our U.S. sales increased $389.2 million to $4,238.4 million for 2012 from $3,849.2 million for 2011. The 10% increase was due to an increase in volume related to the improved business environment, including, in particular, the upstream and midstream sectors, which were driven by activity levels in the oil and natural gas shale regions in the U.S. The acquisition of Chaparral Supply in June 2012 contributed $37.9 million to the revenue increase.

Canadian Segment—Our Canadian sales increased $111.6 million to $765.2 million for 2012 from $653.6 million for 2011. The 17% increase was due to an increase in volume related to the improved business environment, including, in particular, the upstream sector, which was driven by activity levels in the heavy oil and oil sands regions of Canada.

International Segment—Our International sales increased $237.6 million to $567.2 million for 2012 from $329.6 million for 2012. Approximately $192 million of this increase was due to the acquisitions of MRC PSA and MRC SPF in March 2012 and June 2011, respectively, while the remainder of the increase was due to an improvement in volume in the downstream sector in Europe during 2012.

Gross Profit. Our gross profit was $1,013.7 million (18.2% of sales) for the year ended December 31, 2012 as compared to $708.2 million (14.7% of sales) for the year ended December 31, 2011. The 350 basis point improvement in gross profit percentage was driven, in part, by the impact of our LIFO inventory costing methodology which increased 2012 gross profit percentage by 40 basis points and decreased 2011 gross profit percentage by 150 basis points. Excluding the impact of LIFO, as well as depreciation and amortization of intangibles, gross profit percentage improved by 140 basis points.

Certain purchasing costs and warehousing activities (including receiving, inspection, and stocking costs), as well as general warehousing expenses, are included in selling, general and administrative expenses and not in cost of sales. As such, our gross profit may not be comparable to others who may include these expenses as a component of costs of goods sold. Purchasing and warehousing activities costs approximated $34.8 million and $27.3 million for the years ended December 31, 2012 and 2011, respectively.  

Adjusted Gross Profit. Adjusted Gross Profit increased to $1,057.7 million (19.0% of sales) for 2012 from $849.6 million (17.6% of sales) for 2011, an improvement of $208.1 million. Adjusted Gross Profit is a non-GAAP financial measure. We define Adjusted Gross Profit as sales, less cost of sales, plus depreciation and amortization, plus amortization of intangibles, and plus or minus the impact of our LIFO inventory costing methodology. We present Adjusted Gross Profit because we believe it is a useful indicator of our operating performance without regard to items, such as amortization of intangibles, that can vary substantially from company to company depending upon the nature and extent of acquisitions they have been involved in. Similarly, the impact of the LIFO inventory costing method can cause results to vary substantially from company to company depending upon whether they elect to utilize the LIFO method and depending upon which method they may elect. In particular, we believe that Adjusted Gross Profit is a useful indicator of our operating performance because Adjusted Gross Profit measures our Company’s operating performance without regard to acquisition transaction-related amortization expenses. We use Adjusted Gross Profit as a key performance indicator in managing our business. We believe that gross profit is the financial measure calculated and presented in accordance with U.S. generally accepted accounting principles that is most directly comparable to Adjusted Gross Profit.

The following table reconciles Adjusted Gross Profit with our gross profit, as derived from our financial statements (in millions):

 

---

 

 

Selling, General and Administrative (“SG&A”) Expenses. Costs such as salaries, wages, employee benefits, rent, utilities, communications, insurance, fuel and taxes (other than state and federal income taxes) that are necessary to operate our branch and corporate operations are included in selling, general and administrative expenses. Also contained in this category are certain items that are nonoperational in nature, including certain costs of acquiring and integrating other businesses. Our selling, general and administrative expenses were $606.7 million (10.9% of sales) for the year ended December 31, 2012 as compared to $513.6 million (10.6% of sales) for the year ended December 31, 2011. The increase of $93.1 million was largely due to additional personnel costs such as headcount increases, overtime and incentives directly related to the overall increase in business actives as well as the acquisition of MRC PSA, which had SG&A expenses of $34.4 million during 2012, combined with the impact of incremental expenses of approximately $5.9 million for MRC SPF which was acquired in June 2011.

Operating Income. Operating income was $407.0 million for the year ended December 31, 2012, as compared to operating income of $194.6 million for the year ended December 31, 2011, an improvement of $212.4 million.

U.S. Segment—Operating income for our U.S. segment increased to $358.3 million for 2012 from $166.5 million for 2011. The improvement of $191.8 million was driven by an  increase in sales offset by an increase in SG&A expenses as a result of an increase in additional personnel costs directly related to the overall increase in business activity. 

Canadian Segment—Operating income for our Canadian segment increased to $27.2 million for 2012 from $17.4 million for 2011. The improvement of $9.8 million was driven by an increase in sales offset by an increase in SG&A expenses as a result of an increase in additional personnel costs directly related to the overall increase in business activity.  

International Segment—Operating income for our International segment increased to $21.5 million for 2012 from $10.7 million in 2011. The $10.8 million improvement was driven by an improvement in sales that was largely offset by an increase in SG&A expenses that was principally the result of our March 2012 acquisition of MRC PSA.

Interest Expense. Our interest expense was $112.5 million for the year ended December 31, 2012 as compared to $136.8 million for the year ended December 31, 2011. The decrease in interest expense was primarily due to a reduction of our weighted average interest rate. In a series of transactions from June to September 2012, we purchased in the open market $188.7 million in principal amount of our 9.50% senior secured notes due 2016 using our lower interest rate global asset-based lending facility (“Global ABL Facility”) to fund the purchases. In November 2012, we redeemed the remaining $861.3 million of senior secured notes utilizing proceeds from a new lower rate $650 million term loan (“Term Loan”) together with a draw under our Global ABL Facility.

Other Income (Expense). During 2012, in various transactions, we purchased $188.7 million of our senior secured notes in the open market. In November 2012, we redeemed the remaining $861.3 million of senior secured notes outstanding. The purchase and redemption of the senior secured notes resulted in a loss on the early extinguishment of debt of $114.0 million. In March 2012, we refinanced certain of our credit facilities. As a result of their termination, we wrote off and expensed $1.7 million in debt issuance costs.

Income Tax Expense. Our income tax expense was $63.7 million for the year ended December 31, 2012, as compared to $26.8 million for the year ended December 31, 2011. Our effective tax rates were 35.1% and 48.0% for the years ended December 31, 2012 and 2011, respectively. These rates generally differ from the federal statutory rate of 35% principally as a result of state income taxes and differing foreign income tax rates. The 2011 effective tax rate of 48.0% includes adjustments made in the fourth quarter of $4.0 million in deferred income tax expense required to recognize a higher rate at which we expect certain deferred taxes in the Netherlands and Canada to be realized, and an additional $3.9 million in current income tax expense related to the taxation of our foreign operations primarily caused by a geographic shift in taxable income in different jurisdictions.

Net Income. Our net income was $118.0 million for the year ended December 31, 2012 as compared to net income of $29.0 million for the year ended December 31, 2011, an improvement of $89.0 million.

Adjusted EBITDA. We define Adjusted EBITDA as net income plus interest, income taxes, depreciation and amortization, amortization of intangibles and certain other expenses (such as gains/losses on the early extinguishment of debt, changes in the fair value of derivative instruments and goodwill impairment) and plus or minus the impact of our LIFO inventory costing methodology. Adjusted EBITDA, a non-GAAP financial measure, was $463.2 million for the year ended December 31, 2012, as compared to $360.5 million for the year ended December 31, 2011. Our Adjusted EBITDA increased $102.7 million over that period primarily due to the increase in gross profit and other factors noted above.

We believe adjusted EBITDA provides investors a helpful measure for comparing our operating performance with the performance of other companies that have different financing and capital structures or tax rates. We believe that net income is the financial measure calculated and presented in accordance with U.S. generally accepted accounting principles that is most directly comparable to Adjusted EBITDA.

---

 

The following table reconciles Adjusted EBITDA with our net income, as derived from our financial statements (in millions):

 

Financial Condition and Cash Flows

Cash Flows

The following table sets forth our cash flows for the periods indicated below (in millions):

 

 

Operating Activities

Net cash provided by operating activities was $323.6 million in 2013, compared to net cash provided by operating activities of $240.1 million in 2012. Excluding the impact of acquisitions, working capital decreased $125.3 million in 2013 (from 2012) as compared to an increase of $49.1 million in 2012 (from 2011).  The $83.5 million increase in net cash provided by operations was a result of this reduction in working capital offset by a reduction in net income when adjusted for non-cash items such as the $114.0 million charge associated with the redemption of our senior secured notes in 2012. The decline in working capital in 2013 was the result of managing the business to meet the needs of the current business level.

---

 

Net cash provided by operating activities was $240.1 million in 2012, compared to net cash used in operating activities of $102.9 million in 2011. The net cash provided by operations was primarily the result of an increase in net income of $89.0 million due to the improved business environment in our U.S, Canada, and International segments and slower growth in working capital, including accounts receivable and inventory in particular. Excluding the impact of acquisitions, working capital grew $49.1 million in 2012 (from 2011) as compared to $194.4 million in 2011 (from 2010). The slower growth of working capital in 2012 was the result of growing the business in 2011 in preparation to meet the demand of anticipated business levels in 2012.

Investing Activities

Net cash used in investing activities was $69.4 million in 2013, compared to $183.0 million in 2012. The $113.6 million decrease in net cash used in investing activities was primarily due to the smaller acquisitions of Flow Control and Flangefitt that occurred in 2013, which required cash of $46.8 million, as compared to the 2012 acquisitions of MRC PSA, PSS and Chaparral Supply which required cash of $152.4 million. Our capital expenditures as a percentage of sales were 0.4% in 2013 and 0.5% in 2012. We believe that this level of capital expenditures is typical for our business.

Net cash used in investing activities was $183.0 million in 2012, compared to $48.0 million in 2011. The $135.0 million increase in net cash used in investing activities was primarily due to the 2012 acquisitions of MRC PSA, PSS and Chaparral Supply. Our capital expenditures as a percentage of sales were 0.5% in 2012 and 0.4% in 2011.

Financing Activities

Net cash used in financing activities was $265.0 million in 2013, compared to $60.5 million in 2012. In 2013, we used cash of $412.0 million to repay our revolving credit facility, which was offset by the $150 million increase in our Term Loan in the November 2013 re-pricing.  In 2012, we received net proceeds of $333.3 million from our initial public offering and $644 million at closing from borrowings under our $650 million Term Loan. We used $1.1 billion to redeem our outstanding senior secured notes with proceeds from borrowings under our Global ABL Facility as well as our Term Loan. In 2011, financing activities provided $140.6 million which was substantially comprised of net borrowings on our revolving credit facilities used to fund growth in working capital.

Liquidity and Capital Resources

Our primary sources of liquidity consist of cash generated from our operating activities, existing cash balances and borrowings under our existing Global ABL Facility. Our ability to generate sufficient cash flows from our operating activities is primarily dependent on our sales of products to our customers at profits sufficient to cover our fixed and variable expenses. As of December 31, 2013 and 2012, we had cash and cash equivalents of $25.2 million and $37.1 million, respectively. As of December 31, 2013 and 2012, $21.9 million and $27.9 million of our cash and cash equivalents were maintained in the accounts of our various foreign subsidiaries and, if those amounts were transferred among countries or repatriated to the U.S., those amounts may be subject to additional tax liabilities, which would be recognized in our financial statements in the period during which the transfer decision was made. We currently have the intent and ability to permanently reinvest the cash our foreign subsidiaries hold, and there are currently no plans for the repatriation of those amounts.

Our credit facilities consist of a seven-year $793.5 million Term Loan maturing in November 2019 and a five-year $1.25 billion Global ABL Facility maturing in March 2017. The Global ABL Facility provides for borrowings of up to $977 million in the United States, $170 million in Canada, $12 million in the United Kingdom, $75 million in Australia, $9 million in the Netherlands and $7 million in Belgium. The Global ABL Facility contains an accordion feature that allows us to increase the principal amount of the facility by up to $300 million. As of December 31, 2013, we had $776.9 million available under this Global ABL Facility, which represented approximately a $347.3 million increase in availability under similar facilities at December 31, 2012. The acquisition of Stream AS in January 2014 reduced our availability by approximately $246 million.

Our credit ratings are below “investment grade” and, as such, could impact both our ability to raise new funds as well as the interest rates on our future borrowings. Our existing obligations restrict our ability to incur additional debt. We were in compliance with the covenants contained in our various credit facilities as of and during the year ended December 31, 2013.

We believe our sources of liquidity will be sufficient to satisfy the anticipated cash requirements associated with our existing operations for at least the next twelve months. However, our future cash requirements could be higher than we currently expect as a result of various factors. Additionally, our ability to generate sufficient cash from our operating activities depends on our future performance, which is subject to general economic, political, financial, competitive and other factors beyond our control. We may from time to time seek to raise additional debt or equity financing in the public or private markets, based on market conditions. There can be no assurance that we will be able to raise any such financing on terms acceptable to us or at all. We may also seek, from time to time, depending on market conditions, to refinance certain categories of our debt, and we may seek to consummate equity offerings. Any such transaction would be subject to market conditions, compliance with all of our credit agreements, and various other factors.

---

 

Contractual Obligations, Commitments and Contingencies

Contractual Obligations

The following table summarizes our minimum payment obligations as of December 31, 2013 relating to long-term debt, interest payments, capital leases, operating leases, purchase obligations and other long-term liabilities for the periods indicated (in millions):

 

 

(1)     Long-term debt is based on debt outstanding on December 31, 2013.

(2)     Interest payments are based on interest rates in effect at December 31, 2013 and assume contractual amortization payments.

(3)     Purchase obligations reflect our commitments to purchase PVF products in the ordinary course of business. While our vendors often allow us to cancel these purchase orders without penalty, in certain cases cancellations may subject us to cancellation fees or penalties, depending on the terms of the contract.

We historically have been an acquisitive company. We expect to fund future acquisitions primarily from (i) borrowings, either the unused portion of our facilities or new debt issuances, (ii) cash provided by operations, or (iii) the issuance of additional equity in connection with the acquisitions.

Other Commitments

In the normal course of business with customers, vendors and others, we are contingently liable for performance under standby letters of credit and bid, performance and surety bonds. We were contingently liable for approximately $39.9 million of standby letters of credit, trade guarantees that banks issue and bid, and performance and surety bonds at December 31, 2013. Management does not expect any material amounts to be drawn on these instruments.

Legal Proceedings

Asbestos Claims.  We are one of many defendants in lawsuits that plaintiffs have brought seeking damages for personal injuries that exposure to asbestos allegedly caused. Plaintiffs and their family members have brought these lawsuits against a large volume of defendant entities as a result of the various defendants’ manufacture, distribution, supply or other involvement with asbestos, asbestos-containing products or equipment or activities that allegedly caused plaintiffs to be exposed to asbestos. These plaintiffs typically assert exposure to asbestos as a consequence of third-party manufactured products that the Company’s subsidiary, McJunkin Red Man Corporation, purportedly distributed. As of December 31, 2013, we are a named defendant in approximately 279 lawsuits involving approximately 930 claims.  No asbestos lawsuit has resulted in a judgment against us to date, with the majority being settled, dismissed or otherwise resolved. Applicable third-party insurance has substantially covered these claims, and insurance should continue to cover a substantial majority of existing and anticipated future claims. Accordingly, we have recorded a liability for our estimate of the most likely settlement of asserted claims and a related receivable from insurers for our estimated recovery, to the extent we believe that the amounts of recovery are probable.

 

We annually conduct analyses of our asbestos-related litigation to estimate the adequacy of the reserve for pending and probable asbestos-related claims. Given these estimated reserves and existing insurance coverage that has been available to cover substantial portions of these claims, we believe that our current accruals and associated estimates relating to pending and probable asbestos-related litigation likely to be asserted over the next 15 years are currently adequate. This belief, however, relies on a number of assumptions, including: 

 

---

 

If any of these assumptions prove to be materially different in light of future developments, liabilities related to asbestos-related litigation may be materially different than amounts accrued or estimated. Further, while we anticipate that additional claims will be filed in the future, we are unable to predict with any certainty the number, timing and magnitude of such future claims. In our opinion, there are no pending legal proceedings that are likely to have a material adverse effect on our consolidated financial statements.

Other Legal Claims and Proceedings. From time to time, we have been subject to various claims and involved in legal proceedings incidental to the nature of our businesses. We maintain insurance coverage to reduce financial risk associated with certain of these claims and proceedings. It is not possible to predict the outcome of these claims and proceedings. However, in our opinion, there are no material pending legal proceedings that are likely to have a material effect on our business, financial condition, results of operations or cash flows. See also “Note 15—Commitments and Contingencies” to the audited consolidated financial statements as of December 31, 2013.  

Product Claims. From time to time, in the ordinary course of our business, our customers may claim that the products that we distribute are either defective or require repair or replacement under warranties that either we or the manufacturer may provide to the customer. These proceedings are, in the opinion of management, ordinary and routine matters incidental to our normal business. Our purchase orders with our suppliers generally require the manufacturer to indemnify us against any product liability claims, leaving the manufacturer ultimately responsible for these claims. In many cases, state, provincial or foreign law provides protection to distributors for these sorts of claims, shifting the responsibility to the manufacturer. In some cases, we could be required to repair or replace the products for the benefit of our customer and seek our recovery from the manufacturer for our expense. In the opinion of management, the ultimate disposition of these claims and proceedings is not expected to have a material adverse effect on our financial position, results of operations or cash flows.

 

Weatherford Claim.  In addition to PVF, our Canadian subsidiary, Midfield Supply (“Midfield”), now known as MRC Canada, also distributed progressive cavity pumps and related equipment (“PCPs”) under a distribution agreement with Weatherford Canada Partnership (“Weatherford”) within a certain geographical area located in southern Alberta, Canada.  Commencing in late 2005 and into early 2006, Midfield hired new employees, including individuals who left Weatherford, as part of Midfield’s desire to expand its PVF business into northern Alberta.  Shortly thereafter, many of these employees left Midfield and formed a PCP manufacturing, distribution and service company named Europump Systems Inc. (“Europump”) in 2006.  The distribution agreement with Weatherford expired in 2006.  Midfield supplied Europump with PVF products that Europump distributed along with sales of PCP pumps.  In April 2007, Midfield purchased Europump’s distribution branches and began distributing and servicing Europump PCPs.

 

Pursuant to a complaint that Weatherford filed on April 11, 2006 in the Court of Queen’s Bench of Alberta, Judicial Bench of Edmonton (Action No. 060304628), Weatherford sued Europump, three of Europump’s part suppliers, Midfield, certain current and former employees of Midfield, as well as other entities related to these parties, asserting a host of claims including breach of contract, breach of fiduciary duty, misappropriation of confidential information related to the PCPs, unlawful interference with economic relations and conspiracy.  The Company denies these allegations and contends that Midfield’s expansion and subsequent growth was the result of fair competition. 

 

From 2006 through 2012, the case focused largely on Weatherford’s questioning of defense witnesses.  In 2013, the defendants began substantive questioning of Weatherford and its witnesses.  Discovery is ongoing and expected to last through 2014. 

 

Due to ongoing discovery, and the limited information available related to any claimed damages, we cannot reasonably estimate potential loss at this time.  The Company believes Weatherford’s claims are without merit and intends to defend against them vigorously. 

Off-Balance Sheet Arrangements

We do not have any material “off-balance sheet arrangements” as such term is defined within the rules and regulations of the SEC.

---

 

Critical Accounting Estimates

We prepare our consolidated financial statements in accordance with GAAP. To apply these principles, management must make judgments and assumptions and develop estimates based on the best available information at the time. Actual results may differ based on the accuracy of the information utilized and subsequent events. The notes to our audited financial statements included elsewhere in this report describe our accounting policies. These critical accounting policies could materially affect the amounts recorded in our financial statements. We believe the following describes significant judgments and estimates used in the preparation of our consolidated financial statements:

Impairment of Long-Lived Assets: Our long-lived assets consist primarily of amortizable intangible assets, which comprise approximately 13% of our total assets as of December 31, 2013. These assets are recorded at fair value at the date of acquisition and are amortized over their estimated useful lives. We make significant judgments and estimates in both calculating the fair value of these assets, as well as determining their estimated useful lives.

The carrying value of these assets is subject to an impairment test when events or circumstances indicate a possible impairment. When events or circumstances indicate a possible impairment, we assess recoverability from future operations using an undiscounted cash flow analysis, derived from the lowest appropriate asset group. If the carrying value exceeds the undiscounted cash flows, we would recognize an impairment charge to the extent that the carrying value exceeds the fair value. During 2013, 2012 and 2011, no indicators of impairment existed. While we believe our assumptions and estimates are reasonable, the actual results may differ materially from the projected results.

Goodwill and Other Indefinite-Lived Intangible Assets: Our goodwill and other indefinite-lived intangible assets comprise approximately 27% of our total assets as of December 31, 2013. Goodwill and intangible assets with indefinite useful lives are tested for impairment annually, or more frequently if circumstances indicate that impairment may exist. We evaluate goodwill for impairment at three reporting units that mirror our three reportable segments (U.S., Canada and International). Within each reporting unit, we have elected to aggregate the component countries and regions into a single reporting unit based on their similar economic characteristics, products, customers, suppliers, methods of distribution and the manner in which we operate each segment. We perform our annual tests for indications of goodwill impairment as of October of each year, updating on an interim basis should indications of impairment exist.

The goodwill impairment test compares the carrying value of the reporting unit that has the goodwill with the estimated fair value of that reporting unit. If the carrying value is more than the estimated fair value, the second step is performed, whereby we calculate the implied fair value of goodwill by deducting the fair value of all tangible and intangible net assets of the reporting unit from the estimated fair value of the reporting unit. Impairment losses are recognized to the extent that recorded goodwill exceeds implied goodwill. Our impairment methodology uses discounted cash flow and multiples of cash earnings valuation techniques, plus valuation comparisons to similar businesses. These valuation methods require us to make certain assumptions and estimates regarding future operating results, the extent and timing of future cash flows, working capital, sales prices, profitability, discount rates and growth trends. No impairment charges were recognized during the years ended December 31, 2013, 2012 and 2011 as the estimated fair value of each of our three reporting units substantially exceeded their carrying values. While we believe that such assumptions and estimates are reasonable, the actual results may differ materially from the projected results.

Intangible assets with indefinite useful lives are tested for impairment annually or more frequently if circumstances indicate that impairment may exist. This test compares the carrying value of the indefinite-lived intangible assets with their estimated fair value. If the carrying value is more than the estimated fair value, impairment losses are recognized in an amount equal to the excess of the carrying value over the estimated fair value. Our impairment methodology uses discounted cash flow and estimated royalty rate valuation techniques. These valuation methods require us to make certain assumptions and estimates regarding future operating results, sales prices, discount rates and growth trends. No impairment charges were recognized during the years ended December 31, 2013, 2012 and 2011, as the estimated fair value of our indefinite-lived intangible assets substantially exceeded their carrying value. While we believe that such assumptions and estimates are reasonable, the actual results may differ materially from the projected results.

Income Taxes: We use the liability method for determining our income taxes, under which current and deferred tax liabilities and assets are recorded in accordance with enacted tax laws and rates. Under this method, the amounts of deferred tax liabilities and assets at the end of each period are determined using the tax rate expected to be in effect when taxes are actually paid or recovered.

Deferred tax assets and liabilities are recorded for differences between the financial reporting and tax bases of assets and liabilities using the tax rate expected to be in effect when the taxes will actually be paid or refunds received. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in earnings in the period that includes the enactment date. A valuation allowance to reduce deferred tax assets is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized.

---

 

In determining the need for valuation allowances and our ability to utilize our deferred tax assets, we consider and make judgments regarding all the available positive and negative evidence, including the timing of the reversal of deferred tax liabilities, estimated future taxable income, ongoing, prudent and feasible tax planning strategies and recent financial results of operations.  The amount of the deferred tax assets considered realizable however could be adjusted in the future if objective negative evidence in the form of cumulative losses is no longer present in certain jurisdictions and additional weight may be given to subjective evidence such as our projections for growth. 

Our tax provision is based upon our expected taxable income and statutory rates in effect in each country in which we operate. We are subject to the jurisdiction of numerous domestic and foreign tax authorities, as well as to tax agreements and treaties among these governments. Determination of taxable income in any jurisdiction requires the interpretation of the related tax laws and regulations and the use of estimates and assumptions regarding significant future events such as the amount, timing and character of deductions, permissible revenue recognition methods under the tax law and the sources and character of income and tax credits. Changes in tax laws, regulations, agreements and treaties, foreign currency exchange restrictions or our level of operations or profitability in each taxing jurisdiction could have an impact on the amount of income taxes we provide during any given year.

A tax benefit from an uncertain tax position may be recognized when it is more likely than not that the position will be sustained upon examination, including any related appeals or litigation processes, on the basis of the technical merits. We adjust these liabilities when our judgment changes as a result of the evaluation of new information not previously available. Because of the complexity of some of these uncertainties, the ultimate resolution may result in a payment that is materially different from our current estimate of the tax liabilities. These differences will be reflected as increases or decreases to income tax expense in the period in which the new information is available.

We classify interest and penalties related to unrecognized tax positions as income taxes in our financial statements. We intend to permanently reinvest certain earnings of our foreign subsidiaries in operations outside of the U.S., and accordingly, we have not provided for U.S. income taxes on such earnings.

ITEM 7A.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK 

Interest Rate Risk

As of December 31, 2013, all of our outstanding debt was at floating rates. These facilities prescribe the percentage point spreads from U.S. prime, LIBOR, Canadian prime and EURIBOR. Our facilities generally allow us to fix the interest rate, at our option, for a period of 30 to 180 days.

As of December 31, 2013, a 1% increase in the LIBOR rate would result in an increase in our interest expense of approximately $9.9 million per year if the amounts outstanding under our Term Loan and Global ABL Facility remained the same for an entire year.

Foreign Currency Exchange Rates

Our operations outside of the U.S. expose us to foreign currency exchange rate risk, as these transactions are primarily denominated in currencies other than the U.S. dollar, our functional currency. Our exposure to changes in foreign exchange rates is managed primarily through the use of forward foreign exchange contracts. These contracts increase or decrease in value as foreign exchange rates change, protecting the value of the underlying transactions denominated in foreign currencies. All currency contracts are entered into for the sole purpose of hedging existing or anticipated currency exposure; we do not use foreign currency contracts for trading or speculative purposes. The terms of these contracts generally do not exceed one year. We record all changes in the fair market value of forward foreign exchange contracts in income. We recorded gains related to foreign currency contracts of $4.7 million, $0.2 million and $0.1 million in the years ended December 31, 2013, 2012 and 2011, respectively.

Steel Prices

Our business is sensitive to steel prices, which can impact our product pricing, with steel tubular prices generally having the highest degree of sensitivity. While we cannot predict steel prices, we manage this risk by managing our inventory levels, including maintaining sufficient quantity on hand to meet demand, while reducing the risk of overstocking.

 

---

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

 

 

---

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE 

None.

ITEM 9A.CONTROLS AND PROCEDURES 

Evaluation of Disclosure Controls and Procedures

As required by the Exchange Act, we maintain disclosure controls and procedures designed to ensure that information we are required to disclose in reports that we file or submit under the Exchange Act, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms.  Our disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information we are required to disclose in reports that we file or submit under the Exchange Act is accumulated and communicated to our management, including our principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.  Our management, with the participation of our principal executive and financial officers, has evaluated our disclosure controls and procedures as of December 31, 2013 and has concluded that our disclosure controls and procedures were effective as of December 31, 2013.

Pursuant to section 302 of the Sarbanes-Oxley Act of 2002, our Chief Executive Officer and Chief Financial Officer have provided certain certifications to the Securities and Exchange Commission. These certifications are included herein as Exhibits 31.1 and 31.2.

Management’s Report on Internal Control Over Financial Reporting.

The Company’s management report on internal control over financial reporting is set forth on page F-1 of this annual report and is incorporated herein by reference.

Attestation Report of our Registered Public Accounting Firm.

The Company’s registered public accounting firm’s attestation report on our internal control over financial reporting is set forth on page F-2 of this annual report and is incorporated herein by reference.

Changes in Internal Control Over Financial Reporting

There were no changes in the Company’s internal control over financial reporting that occurred during the Company’s last fiscal quarter covered by this report that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting. 

ITEM  9B.OTHER INFORMATION

 

On February 18, 2014, we entered into a new employment agreement (each an “Agreement”) with each of James E. Braun and Daniel J. Churay (each an “Executive”), which Agreement amends and restates the prior agreement between us and each Executive. Each Agreement has an initial term of one year, which will automatically be extended on February 18, 2015, and each subsequent anniversary for one additional year, unless either party gives ninety days’ written notice of non-renewal. Each Agreement provides for an annual base salary of $475,000 for Mr. Braun and $400,000 for Mr. Churay. The Executive’s base salary will be reviewed annually by the Board (or a committee of the Board) and may be adjusted upward at its discretion.

 

Each Executive is entitled to receive annual cash incentive compensation to be based upon individual or Company performance criteria that the Board establishes for each fiscal year, with a target annual cash incentive equal to 75% the Executive’s base salary for the relevant fiscal year. The Executive’s target annual cash incentive will be reviewed annually by the Board (or a committee of the Board) and may be adjusted upward at its discretion.

 

Each Agreement provides that the Executive will be eligible to receive on an annual basis long-term incentive awards in such amounts as the Board (or a committee of the Board) determines in its discretion on terms and conditions, including time and performance based vesting conditions that are generally applicable to other senior executives of the Company.

 

Each Agreement also provides for certain severance payments and benefits following a termination of employment under certain circumstances. Pursuant to the terms of each Agreement, if the Executive’s employment is terminated for any reason, including his voluntary resignation, the Executive is entitled to receive all accrued, but unpaid, obligations including any base salary earned but unpaid through the date of termination, any earned but unpaid annual cash incentive compensation for completed fiscal years and any unreimbursed expenses and any other unpaid accrued benefits (collectively referred to as the “Accrued Amounts”).

 

---

 

If the Executive’s employment is terminated other than for “Cause”, death or “Disability” or if the Executive resigns for “Good Reason”, (each of those terms as defined in each Agreement), in each case other than in connection with a Change in Control (as defined in each Agreement), the Executive is entitled to the following additional severance payments and benefits:

 

 

 

 

In addition, if prior to a Change in Control or after the 24-month period following a Change in Control, the Executive’s employment is terminated other than for “Cause”, death or “Disability” or if he resigns for “Good Reason”, all outstanding equity awards will continue to vest for the next 18-month period as if the Executive remained an active employee. At the end of this 18-month period, any unvested equity awards will be immediately forfeited.  These payments and the provision of benefits are generally subject to the execution of a release within 30 days of termination of employment and compliance with restrictive covenants prohibiting competition, solicitation of employees and interference with business relationships during employment and thereafter for 18 months (or 24 months if the Executive is entitled to the Change in Control benefits described below) following termination. In addition, the Executive is subject to perpetual restrictive covenants regarding confidentiality, non-disparagement and proprietary rights.

 

If, within 24 months following a Change in Control, the Executive’s employment its terminated other than for Cause, death or Disability or if the Executive resigns for Good Reason, the Executive is entitled to the following severance payments and benefits:

 

 

 

 

 

These payments and the provision of benefits are generally subject to the execution of a release within 30 days of termination of employment.

 

If the Executive is terminated due to the Executive’s death or Disability, the Executive (or the Executive’s estate, if applicable) is entitled to receive the following severance payments and benefits:

 

 

 

The Agreement does not provide any “gross-up” payments to pay state, federal or other taxes as a result of payments the Company makes to the Executive under each Agreement.

 

A copy of the form of Agreement is filed as Exhibit 10.5 to this Annual Report.

 

 

---

 

PART III

ITEM  10.DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE 

The information regarding our directors and nominees for director required by Item 401 of Regulation S-K will be presented under the heading “Proposal I—Proposal to Elect Directors” in our Proxy Statement prepared for the solicitation of proxies in connection with our annual Meeting of Stockholders to be held April 29, 2014 (“Proxy Statement”), which information is incorporated by reference herein.

Information regarding our executive officers required by Item 401(b) of Regulation S-K is presented at the end of Part I herein and captioned “Executive Officers of the Registrant” as permitted by General Instruction G(3) to Form 10-K and Instruction 3 to Item 401(b) of Regulation S-K.

Information required by Item 405 of Regulation S-K will be included under the heading “Section 16(a) Beneficial Ownership Reporting Compliance” in our Proxy Statement, which information is incorporated by reference herein.

Information required by paragraphs (c)(3), (d)(4) and (d)(5) of Item 407 of Regulation S-K will be included under the heading “Questions and Answers About the Annual Meeting and Voting” and “Corporate Governance and Board Matters” in our Proxy Statement, which information is incorporated by reference herein.

We have adopted a Code of Ethics for Senior Officers that applies to our Chief Executive Officer, Chief Financial Officer, Chief Accounting Officer, and Controller, or persons performing similar functions. The Code of Ethics for Senior Officers, together with our Corporate Governance Guidelines, the charters for each of our board committees, and our Code of Ethics applicable to all employees are available on our Internet website at www.mrcglobal.com. We will provide, free of charge, a copy of our Code of Ethics or any of our other corporate documents listed above upon written request to our Corporate Secretary at 2 Houston Center, 909 Fannin Street, Suite 3100, Houston, Texas 77010. We intend to disclose any amendments to or waivers of the Code of Ethics on behalf of our Chief Executive Officer, Chief Financial Officer, Chief Accounting Officer, and Controller, and persons performing similar functions on our Internet website at www.mrcglobal.com under the Investor Relations page, promptly following the date of any such amendment or waiver.

ITEM  11.EXECUTIVE COMPENSATION

The information required by Item 402 and paragraphs (e)(4) and (e)(5) of Item 407 of Regulations S-K regarding executive compensation will be presented under the headings “Compensation Discussion and Analysis,” “Employment and Other Agreements,” “Summary Compensation Table for 2013,” “Grants of Plan-Based Awards in Fiscal Year 2013,” “Outstanding Equity Awards at 2013 Fiscal Year-End,” “Option Exercises and Stock Vesting During 2013,” Nonqualified Deferred Compensation,” “Nonqualified Deferred Compensation for 2013,” “Potential Payments upon Termination or Change in Control,” “Non-Employee Director Compensation,” “Compensation Committee Report,” and “Compensation Committee Interlocks and Insider Participation” in our Proxy Statement, which information is incorporated by reference herein. Notwithstanding the foregoing, the information provided under the heading “Compensation Committee Report on Executive Compensation” in our Proxy Statement is furnished and shall not be deemed to be filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, is not subject to the liabilities of that section and is not deemed incorporated by reference in any filing under the Securities Act.

---

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information regarding the security ownership of certain beneficial owners and management required by Item 403 of Regulation S-K will be presented under the heading “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” in our Proxy Statement, which information is incorporated by reference herein.

The following table summarizes information, as of December 31, 2013, relating to our equity compensation plans pursuant to which grants of options, restricted stock, or certain other rights to acquire our shares may be granted from time to time.

 

ITEM 13.CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE 

The information regarding certain relationships and related transactions required by Item 404 and Item 407(a) of Regulation S-K will be presented under the headings “Certain Relationships and Related Transactions”, “Related Party Transaction Policy”, “Corporate Governance and Board Matters,” “Board of Directors,” “Director Independence” and “Committees of the Board” in our Proxy Statement, which information is incorporated by reference herein.

ITEM  14.PRINCIPAL ACCOUNTANT FEES AND SERVICES 

The information regarding our principal accounting fees and services required by Item 9(e) of Schedule 14A will be presented under the headings “Principal Accounting Fees and Services” and “Policy on Audit Committee Pre-Approval of Audit and Non-Audit Services of Independent Auditors” in our Proxy Statement, which information is incorporated by reference herein.

 

---

 

PART IV

ITEM  15.EXHIBITS AND FINANCIAL STATEMENT SCHEDULES 

(a)Documents Filed as Part of this Annual Report:

1.Financial Statements.  

See “Item 8—Financial Statements and Supplementary Data.”

2.Financial Statement Schedules.  

All schedules are omitted because they are not applicable, not required or the information is included in the financial statements or the notes thereto.

3.List of Exhibits.  

 

 

†Management contract or compensatory plan or arrangement required to be posted as an exhibit to this report.

*Filed herewith.

**Furnished herewith.

 

 

 

---

 

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

Date: February 21, 2014

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacity and on the dates indicated.