MSC INDUSTRIAL DIRECT CO INC - Annual Report: 2022 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

__________________________________

FORM 10-K

__________________________________

Commission File Number: 1-14130

__________________________________

MSC INDUSTRIAL DIRECT CO., INC.

(Exact name of registrant as specified in its charter)

__________________________________

(516) 812-2000

(Registrant’s telephone number, including area code)

__________________________________

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

__________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter)during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).  Yes x No 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No x

The aggregate market value of Class A Common Stock held by non-affiliates of the registrant as of February 25, 2022 was approximately $3,576,295,429.

As of October 3, 2022, 47,219,586 shares of Class A Common Stock and 8,654,010 shares of Class B Common Stock of the registrant were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

MSC INDUSTRIAL DIRECT CO., INC.

ANNUAL REPORT ON FORM 10-K

FOR THE FISCAL YEAR ENDED SEPTEMBER 3, 2022

TABLE OF CONTENTS

i

PART I.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K (this “Report”) contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Discussions containing such forward-looking statements may be found in Item 1 of Part I and Item 7 of Part II of this Report, as well as within this Report generally. The words “will,” “may,” “believes,” “anticipates,” “thinks,” “expects,” “estimates,” “plans,” “intends,” and similar expressions are intended to identify forward-looking statements. In addition, any statements which refer to expectations, projections or other characterizations of future events or circumstances, statements involving a discussion of strategy, plans or intentions, statements about management’s assumptions, projections or predictions of future events or market outlook and any other statement other than a statement of present or historical fact are forward-looking statements. We expressly disclaim any obligation to publicly disclose any revisions to these forward-looking statements to reflect events or circumstances occurring subsequent to filing this Report with the United States Securities and Exchange Commission (the “SEC”), except to the extent required by applicable law. These forward-looking statements are subject to risks and uncertainties, including, without limitation, those discussed in Item 1A of Part I and Item 7 of Part II of this Report. In addition, new risks may emerge from time to time and it is not possible for management to predict such risks or to assess the impact of such risks on our business or financial results. Accordingly, future results may differ materially from historical results or from those discussed or implied by these forward-looking statements. Given these risks and uncertainties, the reader should not place undue reliance on these forward-looking statements. These risks and uncertainties include, but are not limited to, the following:

general economic conditions in the markets in which we operate;

changing customer and product mixes;

volatility in commodity and energy prices, the impact of prolonged periods of low, high and rapid inflation, and fluctuations in interest rates;

competition, including the adoption by competitors of aggressive pricing strategies and sales methods;

industry consolidation and other changes in the industrial distribution sector;

our ability to realize the expected benefits from our investment and strategic plans, including our transition from being a spot-buy supplier to a mission-critical partner to our customers;

our ability to realize the expected cost savings and benefits from our restructuring activities and structural cost reductions;

the potential impact of the COVID-19 pandemic on our sales, operations and supply chain;

the retention of key personnel;

the credit risk of our customers, including changes in credit risk as a result of the COVID-19 pandemic, higher inflation and fluctuations in interest rates;

the risk of customer cancellation or rescheduling of orders;

difficulties in calibrating customer demand for our products, such as personal protective equipment or “PPE” products, which could cause an inability to sell excess products ordered from manufacturers resulting in inventory write-downs or could conversely cause inventory shortages of such products;

work stoppages, labor shortages or other business interruptions (including those due to extreme weather conditions) at transportation centers, shipping ports, our headquarters or our customer fulfillment centers;

disruptions or breaches of our information technology systems, or violations of data privacy laws;

the retention of qualified sales and customer service personnel and metalworking specialists;

the risk of loss of key suppliers or contractors or key brands or supply chain disruptions, including due to import restrictions or global geopolitical conditions;

changes to governmental trade or sanctions policies, including the impact from significant import restrictions or tariffs or moratoriums on economic activity with certain countries or regions;

risks related to opening or expanding our customer fulfillment centers;

our ability to estimate the cost of healthcare claims incurred under our self-insurance plan;

litigation risk due to the nature of our business;

risks associated with the integration of acquired businesses or other strategic transactions;

financial restrictions on outstanding borrowings;

our ability to maintain our credit facilities or incur additional borrowings on terms we deem attractive;

the interest rate uncertainty due to the London InterBank Offered Rate (“LIBOR”) reform;

the failure to comply with applicable environmental, health and safety laws and regulations, including government action in response to the COVID-19 pandemic, and other laws applicable to our business;

the outcome of government or regulatory proceedings or future litigation;

goodwill and intangible assets recorded resulting from our acquisitions could be impaired;

our common stock price may be volatile due to factors outside of our control; and

the significant control that our principal shareholders exercise over us, which may result in our taking actions or failing to take actions which our other shareholders do not prefer.

‎

ITEM 1. BUSINESS.

General

MSC Industrial Direct Co., Inc. (together with its wholly owned subsidiaries and entities in which it maintains a controlling financial interest, “MSC,” “MSC Industrial,” the “Company,” “we,” “us” or “our”) is a leading North American distributor of a broad range of metalworking and maintenance, repair and operations (“MRO”) products and services. With a history of driving innovation in industrial product distribution for more than 80 years, we help solve our manufacturing customers’ metalworking, MRO and operational challenges. Through our technical metalworking expertise and inventory management and other supply chain solutions, our team of approximately 7,000 associates helps to keep our customers’ manufacturing operations up and running and to improve their efficiency, productivity and profitability.

We serve a broad range of customers throughout the United States, Canada, Mexico and the United Kingdom, from individual machine shops to Fortune 1000 manufacturing companies to government agencies such as the United States General Services Administration and the United States Department of Defense. We operate a sophisticated network of six customer fulfillment centers, 10 regional inventory centers and 38 warehouses (36 in North America and two in Europe). Of these warehouses, 13 are new to MSC as a result of the fiscal year 2022 acquisitions. Our customer fulfillment centers are located in or near Harrisburg, Pennsylvania; Atlanta, Georgia; Elkhart, Indiana; Reno, Nevada; Columbus, Ohio; and Hanover Park, Illinois in the United States.

We offer approximately 2.1 million active, saleable stock-keeping units (“SKUs”) through our catalogs; our brochures; our eCommerce channels, including our website, mscdirect.com (the “MSC website”); our inventory management solutions; and our customer care centers, customer fulfillment centers, regional inventory centers and warehouses. We carry many of the products we sell in our inventory, so that orders for these in-stock products are processed and fulfilled the day the order is received. We offer next-day delivery nationwide for qualifying orders placed by 8 p.m. Eastern Time (excluding Class C (“Consumables”) category products). Our customers can choose among many convenient ways to place orders: the MSC website, eProcurement platforms, customer care centers or direct communication with our telesales and outside sales associates.

We believe our value-added solutions approach to driving our customers’ success serves to differentiate MSC from traditional transaction-focused distributors. We endeavor to save our customers money when they partner with us for their metalworking and MRO product needs. We focus on building strong partnerships with our customers to help them improve their productivity and growth. We do this in several ways:

our experienced team includes customer care representatives, metalworking specialists, safety specialists, fluid connector specialists, inventory management specialists, in-plant and technical support teams and experienced sales associates focused on driving our customers’ success by reducing their operational costs;

our robust systems and transactional data enable us to provide insights to our customers to help them take cost out of their supply chains and operations;

our extensive product inventory enables customers to deal with fewer suppliers, streamlining their purchasing work and reducing their administrative costs;

our timely shipping enables our customers to reduce their inventory investment and carrying costs;

our purchasing process consolidates multiple purchases into a single order, providing a single invoice for multiple purchases over time and offering direct shipments to specific departments and personnel at one or more facilities. This reduces our customers’ administrative costs;

our extensive eCommerce capabilities provide sophisticated search and transaction capabilities, access to real-time inventory, customer-specific pricing, workflow management tools, customized reporting and other features. We can also interface directly with many purchasing portals;

our “Better MRO” digital platform delivers knowledge and insights to our customers that assist their associates and their business operations;

our collaboration efforts with key supplier partners and their research and development teams deliver value and productivity on the plant floor;

our inventory management solutions enable our customers to carry less inventory and still significantly limit situations when critical items are out of stock;

our proprietary software solution, called Ap Op^® (Application Optimization), enables our metalworking specialists to document productivity savings for customers for a range of applications, including grinding, milling, turning, threading, sawing, hole-making, metalworking fluids and other manufacturing process improvements; and

our exclusive service, MSC MillMax^®, focuses on maximizing milling productivity and lowering cost by reducing the milling optimization process to a fraction of the time. MSC MillMax^® helps customers increase material removal rates, reduce cycle times, improve surface finishes and extend tool life, leading to improved productivity, quality and cost savings.

Industry Overview

MSC operates in a large, fragmented industry. National, regional and local distributors, retail outlets, small distributorships, online distributors, direct mail suppliers, large warehouse stores and manufacturers’ own sales forces all serve MRO customers.

MSC differentiates itself in the industry by being a leading distributor of metalworking products. We have continued to expand technical support and enhance supplier relationships, especially with our metalworking products. Our associates share their deep expertise and knowledge of metalworking and MRO products to help our customers achieve their goals.

Nearly every industrial and service business has an ongoing need for MRO supplies. These businesses, with the exception of the largest industrial plants, often do not have the resources to manage and monitor their MRO inventories effectively. They spend more than necessary to purchase and track their supplies, providing an opportunity for MSC to serve as their one-stop MRO product supplier. Even the larger facilities often store their supplies in multiple locations, so they often carry excess inventories and duplicate purchase orders. In many organizations, multiple people often acquire the same item in small quantities via expensive, one-off purchases, resulting in higher purchasing costs and administrative efforts to keep track of supplies.

With limited capital availability and limited eCommerce capabilities and operating leverage, smaller industrial distributors are under increasing pressure to consolidate and/or curtail services and product lines to remain competitive. Their challenge represents MSC’s opportunity. We improve purchasing efficiency and reduce costs for our customers because our offerings enable our customers to consolidate suppliers, purchase orders and invoices, and reduce inventory tracking, stocking decisions, purchases and out-of-stock situations. In addition, through Vendor Managed Inventory (“VMI”), Customer Managed Inventory (“CMI”) and vending solutions, we empower our customers to utilize sophisticated inventory management solutions.

Business Strategy

MSC’s business strategy is based on helping our customers become more productive and profitable by reducing their total cost for purchasing, using and maintaining metalworking and MRO supplies. Leveraging our expertise, knowledge and experience with metalworking products will continue to be a key tenet of our business and growth strategy. Our customer-focused culture and high-touch engagement model drives value for our customers and results in deep customer relationships. Our strategy includes the following key elements:

Technical Expertise and Support. We provide technical support and one-on-one service through our field sales specialists and our centralized tech team representatives.  We have a dedicated team of more than 120 metalworking specialists who work with customers to improve their manufacturing processes and efficiency, as well as a technical support team that provides assistance to our sales teams and customers via phone and email. These metalworking specialists are customer-facing and work side-by-side with our customers. We utilize our Ap Op^® proprietary software to capture the application data and to deliver documented cost savings to our customers. Our exclusive service, MSC MillMax^®, focuses on maximizing milling productivity and lowering cost by reducing the milling optimization process to a fraction of the time. Our customers recognize the value of a distributor that can provide technical support to improve their operations and productivity.

Inventory Management Solutions. Our approach starts with a thorough customer assessment. Our expert associates develop and recommend solutions that provide exceptional value to the customer. Depending on the customer’s size and needs, we customize options to address complexity and processes, as well as specific products, technical issues and cost targets. The options include eProcurement, CMI, VMI, vending, tool crib control or in-plant solutions. Our world-class sourcing, logistics and business systems provide predictable, reliable and scalable service.

Broad Selection of Products. Customers want a full range of product options, even as they look to reduce the number of suppliers they partner with. We provide “good-better-best” alternatives, comprising a spectrum of brand name, MSC exclusive brand and generic MRO products. MSC’s broad selection of products enables customers to choose the right combination of price and quality on every purchase to meet their needs.

Same-Day Shipping and Next-Day Delivery. We guarantee same-day shipping of our core metalworking and MRO products, enabling customers to reduce supply inventories. We fulfill our same-day shipment guarantee for in-stock products about 99% of the time. We offer next-day delivery nationwide for qualifying orders placed by 8 p.m. Eastern Time (excluding Consumables category products). We know that our customers value this service, and areas accessible by next-day delivery generate significantly greater sales for MSC than areas where next-day delivery is not available.

Superior Customer Service. Our commitment to customer service starts with our many associates who share their deep expertise and knowledge of metalworking and MRO products to help our customers achieve greater success. We invest in sophisticated information systems and provide extensive training to empower our associates to better support our customers. Using our proprietary customer support software, our customer care representatives can: inform customers on a real-time basis of product availability; recommend substitute products; verify credit information; receive special, custom or manufacturer direct orders; cross-check inventory items using previously entered customer product codes; and arrange or provide technical assistance. We offer: customized billing; customer savings reports; electronic data interchange ordering; eCommerce capabilities; bulk discounts; and stocking of specialty items requested by customers.

Commitment to Technological Innovation. We embrace technological innovations to support our growth, improve customer service and reduce our operating costs. The innovations make our buying practices more effective, improve our automated inventory replenishment and streamline order fulfillment. MSC’s proprietary software helps our customers and sales representatives determine the availability of products in real time and evaluate alternative products and pricing. The MSC website contains a searchable online catalog with electronic ordering capabilities. The MSC website also offers an array of services, workflow management tools and related information. Our warehouses are automated through the use of advanced systems and robotics platforms that allow us to rapidly process orders for next-day delivery, with greater efficiency.

We also continually upgrade our distribution methods and systems and provide comprehensive electronic ordering capabilities to support our customers’ purchase order processing. We continue to invest in our VMI, CMI and vending solutions that streamline customer replenishment and trim our customers’ inventories. Our vending solutions include different kinds of machines, such as storage lockers or carousels, which can stand alone or be combined with other machines. MSC vending machines use network or web-based software to enable customers to gain inventory visibility, save time and drive profitability.

Digital Technologies and the MSC Website. The MSC website provides personalized real-time inventory availability, online bill payment, delivery tracking status, and other enhancements, including work-flow management tools. The user-friendly search engine allows customers to find SKUs by keyword, part description, competitive part number, vendor number or brand. The MSC website is a key component of our strategy to reduce our customers’ transaction costs and delivery time.

Competitive Pricing. Customers increasingly evaluate their total procurement cost, of which our industrial supplies are an important component. As a result, we strategically adjust our customer pricing to maintain competitiveness, while capturing the value of our comprehensive services.

Growth Strategy

Our growth strategy includes a number of initiatives to gain market share and complete the repositioning of MSC from being a spot-buy supplier to a mission-critical partner to our customers. These initiatives include the following:

Expanding and enhancing our metalworking capabilities to aggressively penetrate customers in heavy and light manufacturing. MSC is a leading distributor of metalworking products in North America. We have continued to expand technical support and enhance supplier relationships. We are continuing to develop high-performance metalworking products marketed under MSC exclusive brands, providing high-value product alternatives for our customers. Our metalworking field specialists and centralized technical support team members have diverse backgrounds in machining, programming, management and engineering. They help our customers select the right tool for the job from our deep supplier base and exclusive brands.

Expanding programs for public sector and national account customers. Our government programs are focused on becoming an industry leader and trusted advisor to key public sector end customers. Although MSC has been providing metalworking and MRO supplies to the commercial sector for more than 80 years, we recognize the importance of diversifying into the public sector. Over the last few years, MSC has invested in our government programs and expanded into several large contracts with federal, state and local agencies. In fiscal year 2022, MSC was awarded and has successfully executed a five-year contract to service the United States Marine Corps bases across the continental United States, Hawaii and Japan. We see opportunity for additional growth in the public sector.

We provide customized national account programs for larger customers, often on an enterprise-wide basis. These national account customers value our ability to support their procurement needs electronically to reduce their transactional costs. Our dedicated national account managers and operations experts provide supply chain solutions that reduce these customers’ total costs of procurement and ownership through increased visibility into their MRO purchases and improved management. We demonstrate these savings by providing these customers with detailed reporting at both the enterprise and site level.

Increasing the size and improving the productivity of our direct sales force. We have invested resources to give our sales representatives more time with our customers and provide increased support during the MRO purchasing process. At September 3, 2022, our field sales and service associate headcount was 2,536. We believe that our sales force investment has played a critical role in the overall success of the Company’s revenue performance. Our sales force, focusing on a more complex and high-touch role, drives value for our customers by enabling them to achieve higher levels of growth, profitability and productivity.

Increasing sales from existing customers and generating new customers with various value-added programs. Our value-added programs include business needs analysis, inventory management solutions and workflow management tools. Our customers particularly value our industrial vending solutions that can accommodate a range of products from precision cutting tools to MRO supplies. We are increasing investments in vending, VMI and our growing in-plant solutions program.

Increasing the number of product lines and productive SKUs. We offer approximately 2.1 million active, saleable SKUs through our eCommerce channels, including the MSC website, inventory management solutions, catalogs, brochures and customer care centers. The majority of products sold are third-party manufactured products; however, SKUs sold under MSC private label brands approximate 14% of net sales. We are increasing the breadth and depth of our product offerings and pruning non-value-added SKUs. In fiscal year 2022, we added approximately 190,000 SKUs, net of SKU removals, to our active, saleable SKU count. We also leverage the depth and breadth of MSC’s product portfolio within our Consumables category sales channel. We plan to continue adding SKUs in fiscal year 2023.

Improving our marketing programs. MSC has built an extensive buyer database, which we harness via both human and artificial intelligence to target our marketing to the best prospects. We supplement the efforts of our sales force through the use of digital and traditional marketing tactics. Our industry-specific expertise allows us to focus our outreach on the most promising growth areas.

Enhancing eCommerce capabilities. The MSC website is a proprietary, business-to-business, horizontal marketplace serving the metalworking and MRO market. The MSC website allows customers to enjoy added convenience without sacrificing customized service. The MSC website is a key component of our strategy to reduce customers’ transaction costs and internal requisition time. MSC continues to evaluate the MSC website and solicit customer feedback, making on-going improvements to ensure that it remains a premier website in our marketplace. ​The MSC website provides advanced features, such as order approval (workflow) and purchase order control, that our customers interact with in order to derive business value beyond merely placing an order. Many large customer accounts transact business with MSC using eProcurement solution providers that sell a suite of eCommerce products. We have associations with many of these providers and continue to evaluate and expand our eProcurement capabilities.

Improving our excellent customer service. MSC consistently receives top quartile customer satisfaction ratings, according to customer surveys. By working to anticipate our customers’ needs, we strive to exceed our customers’ expectations. This focus on our customers’ needs enables us to achieve our goal to stand apart in the market. We use customer comment cards, surveys and other customer outreach tools, using their feedback to improve the overall customer experience.

Selectively pursuing strategic acquisitions and investments. MSC is a leader in the highly fragmented industrial distribution market with significant opportunities for organic and acquisitive growth. We selectively pursue strategic acquisitions that deepen our metalworking expertise, extend our capabilities into strategic adjacencies, such as Original Equipment Manufacturer (“OEM”) fasteners, and expand our markets in North America. We also seek to target investments in businesses and other ventures which we believe offer opportunities for growth and improved operational performance for our business.

In June 2022, the Company acquired certain assets and assumed certain liabilities of Engman-Taylor Company, Inc. (“Engman-Taylor”), a Menomonee Falls, Wisconsin-based distributor of metalworking tools and supplies. Engman-Taylor will continue to go to market under its current name as an MSC company.

In August 2022, the Company acquired 100% of the outstanding equity of Tower Fasteners, LLC (“Tower Fasteners”), a Holtsville, New York-based distributor of OEM fasteners and components. The acquisition, which was made through the Company’s subsidiary, All Integrated Solutions, Inc. (“AIS”), complements and expands the Company’s presence in the OEM fastener market. Tower Fasteners will continue to go to market under its current name as an MSC company.

Intellectual Property

We conduct business under various trademarks and service marks. We protect these trademarks by maintaining registrations in the United States, Canada and elsewhere. We also file for and obtain patents and use confidentiality and other agreements with customers, associates, consultants and others in order to protect our proprietary information. Although we do not believe our operations are substantially dependent upon any of our intellectual property, we consider our intellectual property to be valuable to our business.

Products and Supplier Services

Our broad range of MRO products includes cutting tools, measuring instruments, tooling components, metalworking products, fasteners, flat stock, raw materials, abrasives, machinery hand and power tools, safety and janitorial supplies, plumbing supplies, materials handling products, power transmission components and electrical supplies. Our large and growing number of SKUs makes us an increasingly valuable partner to our customers as they look to trim their supplier base. Our assortment from multiple product suppliers and MSC exclusive brands, prices and quality levels enables our customers to select from “good-better-best” options on nearly all of their purchases. Our extensive network of suppliers provides us access to technical application, safety, training certifications and many other value-added services for our customers. We stand apart from our competitors by offering name brand, exclusive brand, and generic products, depth in our core product lines, and competitive pricing.

We purchase substantially all of our products directly from more than 3,000 suppliers. No single supplier accounted for more than 5% of our total purchases in fiscal year 2022, 2021 or 2020.

Customer Fulfillment Centers and Distribution Network

We continue to invest in the enhancement of our distribution efficiency and capabilities. When our customers order an in-stock product online or via phone, we ship it the day the order is placed about 99% of the time. We do that through our six customer fulfillment centers, 10 regional inventory centers and 38 warehouses. Some specialty or custom items and very large orders are shipped directly from the manufacturer. We manage our primary customer fulfillment centers via computer-based SKU tracking systems and radio frequency devices that locate specific stock items to make the selection process more efficient. Our warehouses are predominantly from our acquired subsidiaries and 13 are new to MSC as a result of the fiscal year 2022 acquisitions. Similar to our customer fulfillment centers, these warehouses primarily handle the stocking and fulfillment of inventory. However, in some cases, these locations also operate as subsidiary headquarters and provide office space for sales associates.

Sales and Marketing

We serve individual machine shops, Fortune 1000 companies, government agencies and manufacturers of all sizes. With some of our recent acquisitions, such as AIS and Tower Fasteners, we have increased our presence in the fastener and Consumables product categories and significantly increased our presence in the VMI space. VMI involves not only the selling of the maintenance Consumables by our associates, but also the management of appropriate stock levels for the customer, fulfilling replenishment orders, putting away the stock, and maintaining a clean and organized inventory area.

MSC’s public sector customers include federal agencies, state governments, and healthcare providers. Federal government customers include the United States Marine Corps, the United States Coast Guard, the United States Postal Service, the United States General Services Administration, the United States Department of Defense, the United States Department of Energy, large and small military bases, Veterans Affairs hospitals, and correctional facilities. We have individual state and local contracts and have been awarded partnerships with several state co-operatives.

Our national account program includes Fortune 1000 companies, large privately held companies, and international companies primarily doing business in North America. We have identified hundreds of additional national account prospects and have given our sales team tools to ensure we are targeting prospective customers that best fit the MSC model.

We have implemented advanced analytics and significantly increased the return on our marketing investments designed to acquire new customers and increase our share of business with current customers. The majority of our efforts are focused on search engine marketing, email marketing and online advertising to address changes in our customers’ buying behavior and we utilize master catalogs and direct mail on a selective basis. We use our own database of over four million contacts together with external information to target buyers with the highest likelihood to buy.

Our sales representatives are highly trained and experienced individuals who build relationships with customers, assist customers in reducing costs, provide and coordinate technical support, coordinate special orders and shipments with vendors, and update customer account profiles in our information systems databases. Our marketing approach centers on the ability of our sales representatives, armed with our comprehensive databases as a resource, to respond effectively to the customers’ needs. When a customer places a call to MSC, the sales representative on the other end of the line has immediate access to that customer’s company and specific buyer profile, which includes billing and purchasing track records, and plant and industry information. Meanwhile, the sales representative has access to inventory levels on every SKU we carry.

Our associates at our customer care centers undergo an intensive seven-week training course, followed up by regular training seminars and workshops. We monitor and evaluate our sales associates at regular intervals and provide our sales associates with technical training by our in-house specialists and product vendors. We maintain a separate technical support group dedicated to answering customer inquiries and assisting our customers with product operation information and finding the most efficient solutions to manufacturing problems.

Virtual Customer Care Hubs

As part of our enhanced customer support model implemented in fiscal year 2021, we transitioned from our branch office network to virtual customer care hubs. Our virtual customer care hubs continue to play an integral role in obtaining new accounts and penetrating existing ones.

Digital and Traditional Marketing

Our primary method of presenting products and solutions is the MSC website and our digital marketing programs, which include tactics such as search engine marketing, email marketing, social media and online advertising. These programs align with the ever-evolving buying behavior of our customers and are designed to maximize marketing productivity and return on marketing dollars spent. While digital is our primary means of marketing, we leverage master catalogs, specialty and promotional catalogs, and brochures where appropriate. We use specialty and promotional publications to target customers in specific areas, such as metal fabrication, facilities management, and safety and janitorial. Specialty and promotional catalogs, targeted to our best prospects, offer a more focused selection of products.

Customer Service

One of our goals is to make purchasing our products as convenient and effortless as possible.  Customers submit approximately 62% of their orders digitally through our technology platforms (the MSC website, vending machines and eProcurement). The remaining orders are primarily placed via telephone, email and fax. The efficient handling of orders is a critical aspect of our business. Order entry and fulfillment occurs at our main customer care centers, mostly located at our customer fulfillment centers. Customer care phone representatives enter non-digital orders into computerized order processing systems. In the event of a local or regional situation, our communications system will reroute customer exchanges to an alternative location. When an order enters the system, a credit check is performed; if the credit is approved, the order is usually transmitted to the customer fulfillment center closest to the customer. Customers are invoiced for merchandise, shipping and handling promptly after shipment.

Information Systems

MSC’s information systems are an integral part of driving growth and delivering our full value proposition to our customers. In today’s digital world, our systems allow our customers to conduct business with us securely across multiple channels and in the way they want. In addition, our systems enable data visibility for faster decision making, which drives operational efficiency and supports a flexible remote workforce across the globe.

Our eCommerce environment is currently being upgraded and enhanced with a focus on delivering an exceptional online customer experience. We plan to achieve this by utilizing state-of-the-art cloud technologies, developing an industry leading search engine, deploying an integrated digital marketing platform and further enriching our product data.

In response to shifts in the labor market, we also look to accelerate automation in our customer fulfillment centers. In fiscal year 2019, we introduced a patented robotic packing solution, and, in fiscal year 2023, we expect to be deploying advanced robotic picking technology to several customer fulfillment centers.

Most of our information systems operate in real time over a secure wide area network, letting each customer fulfillment center and virtual customer care hub share information and monitor daily progress on sales activity, credit approvals, inventory levels, stock balancing, vendor returns, order fulfillment and other key performance measures. We maintain a sophisticated buying and inventory management system that monitors all of our SKUs and automatically purchases inventory from vendors for replenishment, based on proprietary forecasting models. We also maintain an Electronic Data Interchange (“EDI”) and XML purchasing program with our vendors to boost order placement efficiency, reduce order cycle processing time, and increase order accuracy.

As part of our commitment to creating services that fuel the potential of our customers, we develop and maintain a suite of proprietary VMI digital solutions. These VMI digital solutions allow our customers to focus on their core business, while MSC manages their inventory ordering, fulfillment and replenishment. Our various VMI digital solutions are customizable to meet both simple and complex customer needs. Our scanning solutions integrate scanner accumulated orders directly into our Sales Order Entry system and the MSC website. Our CMI enables customers to simply and effectively replenish inventory by submitting orders directly to the MSC website. Our customized vending solutions are used by customers in manufacturing plants to help them achieve supply chain and shop floor optimization, through inventory optimization and reduced tooling and labor costs. All of our digital solutions function directly as front-end ordering systems for our e-Portal-based customers. These solutions take advantage of advanced technologies built upon the latest innovations in eCommerce and wireless and cloud-based computing.

Our core business systems run in a highly distributed computing environment and utilize world-class software and hardware platforms from key partners. We utilize disaster recovery techniques and procedures, which are consistent with best practices in enterprise information technology (“IT”). With many of our associates shifting to a remote work model beginning in fiscal year 2020, we deployed secure home computing assets and implemented collaboration software to enable interconnected teams and scalable video conferencing for large virtual gatherings.

We believe that our current systems and practice of implementing regular updates are adequate to support our current needs. Over the next few years, we will also be upgrading and migrating many of our systems to take advantage of the flexibility and controls offered by cloud computing platforms while downsizing our on-premise data center footprint. Recent cloud migrations include commercial off-the-shelf enterprise systems as well as our eCommerce infrastructure.

Our sales representatives are equipped with proprietary mobile technology that allows them to tap into MSC’s supply chain directly from our customers’ manufacturing plants and make sure that critical inventory is always on site and available. In addition, we are enhancing our customer websites and portals to reflect this new mobile reality at a pace in line with customer adoption of mobile technology.

Our customer care centers are powered via state-of-the-art telephony, case management and workforce optimization platforms. The features within the platforms create a seamless environment equipped with advanced applications that assist our associates in optimizing our customers’ experience. The architecture has established a dynamic infrastructure that is scalable both in terms of operations and future capabilities. We are continuing to implement additional functionality aimed at enhancing the engagement and personalization of the customer experience regardless of the contact method chosen.

Competition

The MRO supply industry is a large, fragmented industry that is highly competitive. We face competition from traditional channels of distribution, such as retail outlets, small dealerships, regional and national distributors utilizing direct sales forces, manufacturers of MRO supplies, large warehouse stores and larger direct mail distributors. We also face substantial competition in the online distribution space that competes with price transparency and includes both traditional distributors and non-traditional, web-based eCommerce competitors. In addition, new entrants in the MRO supply industry could increase competition. We believe that sales of MRO supplies will become more concentrated over the next several years, which may make MRO supply distribution more competitive. Some of our competitors challenge us with a greater variety of product offerings, greater financial resources, additional services, or a combination of these factors. In the industrial products market, customer purchasing decisions are based primarily on one or more of the following criteria: price, product selection, product availability, technical support relationship, level of service and convenience. We believe we compete effectively on all such criteria. Our industry has seen consolidation in recent years. The trend of our industry toward consolidation could cause the industry to become more competitive as greater economies of scale are achieved by

competitors, or as competitors with new lower-cost business models are able to operate with lower prices and gross profit on products.

Seasonality

During any given time, we may be impacted by our industrial customers’ plant shutdowns, particularly during the summer months (our fiscal fourth quarter), as well as the winter months for the Christmas and New Year holiday period (our fiscal second quarter). In addition, we may be impacted by weather-related disruptions.

Compliance with Health and Safety and Environmental Laws and Regulations

Our operations are subject to and affected by a variety of federal, state, local and non-U.S. health and safety and environmental laws and regulations relating to the discharge, treatment, storage, disposal, investigation and remediation of certain materials, substances and wastes. We continually assess our compliance status and management of environmental matters to ensure that our operations are compliant with all applicable environmental laws and regulations.

Operating and maintenance costs associated with environmental compliance and management of sites are a normal and recurring part of our operations. With respect to all other matters that may currently be pending, in the opinion of management, based on our analysis of relevant facts and circumstances, compliance with applicable environmental laws and regulations is not likely to have a material adverse effect upon our capital expenditures, earnings or competitive position.

Human Capital Resources

As of September 3, 2022, we employed 6,994 associates worldwide, of which approximately 6,765 were full-time and 229 were part-time. No associate is represented by a labor union. Approximately 90% of our workforce is based in the United States. MSC has not experienced any major work stoppages and considers associate relations to be good.

Our goal is to attract, develop and retain a talented team of associates inspired by our greater purpose of fueling the potential of our stakeholders. We believe a career at MSC includes:

Purpose – MSC helps to fuel the industrial economy, propel our stakeholders’ success, and contribute to our customers’ growth.

People and Respect – MSC cares about people. We strive to offer a positive work environment, with people you like and leaders you can respect.

Health and Well-being – MSC offers many available options for our associates and their families to be healthy and plan for the future.

Rewards and Recognition – Appreciation for our associates’ contributions and the opportunity to share financially and intrinsically in MSC’s success.

Growth – The opportunity to learn, take risks and develop a career.

At MSC, we refer to our workforce as our team of “associates,” rather than employees, because we believe that our associates have a stake in our success. We rely on each other to be as dedicated to MSC as MSC is dedicated to each associate. This is a critical part of our expectations of our associates and a unique part of our culture.

Health and Safety

MSC’s safety vision is to build a culture in which safety is a top priority across all levels of the organization, and that every associate has the right and responsibility to continually seek to prevent injuries and build a safe environment for everyone. Our leadership team is highly engaged through our Safety Leadership System in identifying trends in our incidents throughout the network and working collaboratively with our Safety Professionals to effectively reduce incidents involving our associates and to make MSC one of the safest places to work.

In calendar year 2021, the Company’s Occupational Safety and Health Administration (“OSHA”) Total Recordable Incident Rate was 1.09 and the Company’s OSHA Lost Time Incident Rate was 0.62 based upon the number of incidents per 100 associates (or per 200,000 work hours). The Company’s rates fall well below the Total Recordable Incident Rate and the Lost Time Incident Rate of the North American Industry Classification System, which were 2.20 and 0.90, respectively. The success of our Safety Leadership System was additionally validated through the completion and re-certification to the ISO 45001 Standard in our Columbus, Ohio customer fulfillment center in calendar year 2020. We are expanding our efforts to achieve ISO 45001 certification throughout the supply chain network in the coming years.

Diversity, Equity and Inclusion

MSC is committed to promoting a respectful, diverse workplace, constructive collaboration, innovative creativity, and genuine leadership. We believe that our culture and our business benefit greatly from the rich combination of experience, creativity and perspective that our diverse workforce provides. Our associates' differences – the individual characteristics, work styles, beliefs and backgrounds – make us strong and equip us to better serve our customers. Because we are dedicated to an environment of equal opportunity, we partner with several outreach organizations that help us in our recruitment efforts such as: Hiring our Heroes, minority-owned organizations, women-owned organizations, local and state workforce services, and vocational rehab centers. Additionally, MSC launched three new business resource groups during fiscal year 2022, known as Inclusion Circles—Pride, DisABLEd and HOLA (Hispanic Organization for Leadership and Advancement)— adding to the those previously introduced in fiscal year 2021—WIN (Women’s Inclusion Network), Veterans, and BIG (Black Inclusion Group). Membership of the Inclusion Circles has grown to more than 800 associates combined, and each Inclusion Circle is sponsored by a member of the MSC leadership team.

Talent Acquisition and Development

MSC focuses on creating opportunities for associate growth, development and training education, offering a comprehensive talent program that continues throughout an associate’s career. MSC believes that its future success is highly dependent upon the Company’s continued ability to attract, retain and motivate associates. As part of its efforts in these areas, the Company offers competitive compensation and benefits to meet the diverse needs of team members and support their health and well-being, financial future and work-life balance. Associates are given access to health plan resources, disease management, tobacco cessation, parental support, stress management and weight loss programs. In addition, MSC provides retirement savings, paid holidays and time off, educational assistance and income protection benefits, as well as a variety of other programs to its associates.

MSC also offers through MSC University various learning and development opportunities in support of associate career growth and success through a variety of offerings, including virtual classrooms and webinars, instructor-led courses, informal work groups, e-learning, books and articles, and more. These opportunities can drive improvement, facilitate career development, provide coaching and mentoring opportunities, and enhance communication skills. The average training hours completed by MSC associates in fiscal year 2022 increased more than 10% year over year to over 17 hours per individual. Additionally, MSC’s tuition assistance program covers educational costs and provides eligible associates the financial assistance to obtain a graduate or undergraduate degree while working.

Available Information

The Company’s internet address is www.mscdirect.com. We make available on or through our investor relations page on our website, free of charge, our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, and Current Reports on Form 8-K, and amendments to those reports as soon as reasonably practicable after this material is electronically filed with or furnished to the SEC. We also make available, on our website, the charters of the committees of our Board of Directors, the Code of Ethics, the Code of Business Conduct and the Corporate Governance Guidelines pursuant to SEC requirements and New York Stock Exchange (“NYSE”) listing standards. Information on our website does not constitute a part of this Report.

ITEM 1A. RISK FACTORS.

In addition to the other information in this Report, the following factors should be considered in evaluating the Company and its business. Our future operating results depend upon many factors and are subject to various risks and uncertainties. The known material risks and uncertainties which may cause our operating results to vary from anticipated results or which may negatively affect our operating results and profitability are as follows:

Risks Related to Our Business

Our business depends heavily on the operating levels of our customers and the economic factors that affect them, including general economic conditions.

Many of the primary markets for the products and services we sell are subject to cyclical fluctuations that affect demand for goods and materials that our customers produce. Consequently, demand for our products and services has been, and will continue to be, influenced by most of the same economic factors that affect demand for and production of our customers’ products.

When, as occurs in economic downturns, current or prospective customers reduce production levels because of lower demand or tight credit conditions, their need for our products and services diminishes. Selling prices and terms of sale with our customers come under pressure, which may adversely affect the profitability and the durability of customer relationships. Credit losses increase as well. Volatile economic and credit conditions also make it more difficult for distributors, as well as customers and suppliers, to forecast and plan future business activities and may prevent them from ordering our products as frequently or in the quantities they otherwise would. We may experience adverse impacts to our business as a result of any economic recession or slowing in the rate of growth.

Additionally, macroeconomic conditions may impact the proper functioning of financial and capital markets, foreign currency exchange rates, commodity and energy prices, labor and supply costs, and interest rates. Any or all of these factors may impact us, our customers, and their demand for our products, and all of these factors may be exacerbated by an increase in the rate of COVID-19 infections, or any government restrictions put in place as a result of an increase in COVID-19 infections.

In addition, as various sectors of our industrial customer base face increased foreign competition, and in fact lose business to foreign competitors or shift their operations overseas in an effort to reduce expenses, we may face increased difficulty in growing and maintaining our market share and growth prospects.

Our results of operations have been adversely affected in the past, and may in the future be adversely impacted, by the COVID-19 pandemic.

The COVID-19 pandemic has led to periods of significant volatility, uncertainty and economic disruption since its onset. The COVID-19 pandemic has had impacts on our business, operations, financial results and financial condition in the past and the future impacts and consequences of the pandemic will depend on numerous evolving factors which are uncertain and cannot be predicted, including, but not limited to: the scope, duration and severity of the pandemic, including the possibility of further surges or variants of COVID-19; governmental, business and individuals’ actions taken in response; the effect on our customers and customers’ demand for our services and products; the effect on our suppliers and disruptions to the global supply chain, especially with respect to freight and labor availability; disruptions to our ability to sell and provide our services and products; disruptions to our operations resulting from the illness of any of our associates, including associates at our customer fulfillment centers; the macroeconomic environment, including periods of high inflation; the ability of our customers to pay for our services and products; and any closures of our and our suppliers’ and customers’ facilities. Any of these factors could amplify the other risks and uncertainties described herein and could materially adversely affect our business, operations, financial results and financial condition. The future impacts of the COVID-19 pandemic may be difficult to predict and may affect us differently than we have previously experienced.

Changes in our customer and product mix, or adverse changes to the cost of goods we sell, could cause our gross margin percentage to fluctuate, or decrease.

From time to time, we have experienced changes in our customer mix and in our product mix. Changes in our customer mix have resulted from geographic expansion, daily selling activities within current geographic markets, and targeted selling activities to new customers. Changes in our product mix have resulted from marketing activities to existing customers and needs communicated to us from existing and prospective customers as well as from business acquisitions. As our national account and government customer program sales grow, we will face continued pressures on maintaining gross margin because these customers receive lower pricing due to their higher level of purchases from us. In addition, our continued expansion of our vending program and other eCommerce platforms has placed pressure on our gross margin. We may also be subject to price increases from our suppliers and independent freight carriers that we may not be able to pass along to our customers, particularly in periods of high inflation.

Volatility in commodity, energy and labor prices may adversely affect operating margins.

In times of commodity, energy and labor price increases, we may be subject to price increases from our suppliers and independent freight carriers that we may be unable to pass along to our customers. Raw material costs used in our suppliers’ products (steel, tungsten, etc.), and energy and labor costs may increase, which may result in increased production costs for our suppliers. The fuel costs of our independent freight carriers have been volatile. Our suppliers and independent freight carriers typically look to pass increased costs along to us through price increases. When we are forced to accept these price increases, we may not be able to pass them along to our customers, resulting in lower margins.

In addition to increases in commodity, energy and labor prices, decreases in those costs, particularly if severe, could also adversely impact us by creating deflation in selling prices, which could cause our gross profit margin to deteriorate, or by negatively impacting customers in certain industries, which could cause our sales to those customers to decline.

Inflation impacts the costs at which we can procure products and our ability to increase prices at which we sell to customers over time. Prolonged periods of low inflation or deflation could adversely affect our ability to increase the prices at which we sell to customers. Periods of high or rapid inflation, such as the historically high levels of inflation the United States has experienced recently, may also cause the prices that our suppliers and independent freight carriers charge to increase rapidly or unpredictably. We may not be able to pass along increased costs due to inflation in full or synchronously to customers, which may result in lower margins or changes in our relationships with customers.

We operate in a highly competitive industry, which is evolving and consolidating, which could adversely affect our business and financial results.

The MRO supply industry, although consolidating, still remains a large, fragmented industry that is highly competitive. We face competition from traditional channels of distribution, such as retail outlets, small dealerships, regional and national distributors utilizing direct sales forces, manufacturers of MRO supplies, large warehouse stores and larger direct mail distributors. We believe that sales of MRO supplies will become more concentrated over the next several years, which may make MRO supply distribution more competitive. Some of our competitors challenge us with a greater variety of product offerings, greater financial resources, additional services, or a combination of these factors. In addition, we also face the risk of companies which operate primarily outside of our industry entering our marketplace.

Our industry is evolving at an accelerated pace. If we do not have the agility and flexibility to effectively respond to this accelerated pace of industry changes, our strategy could be put at risk resulting in a loss of market share. We also face substantial competition in the online distribution space that competes with price transparency. Increased competition from online retailers (particularly those major internet providers who can offer a wide range of products and rapid delivery), and the adoption by competitors of aggressive pricing strategies or sales methods, could cause us to lose market share or reduce our prices, adversely affecting our sales, margins and profitability.

Traditional MRO suppliers are attempting to consolidate the market through internal expansion, acquisitions or mergers with other industrial suppliers, or a combination of both. This consolidation allows suppliers to improve efficiency and spread fixed costs over a greater number of sales, and to achieve other benefits derived from economies of scale. The trend of our industry toward consolidation could cause the industry to become more competitive as greater economies of scale are achieved by competitors, or as competitors with new lower-cost business models are able to operate with lower prices and gross profit on products. These trends may adversely affect our sales, margins and profitability.

In order to operate more efficiently, control costs, and improve profitability, we incurred approximately $15.8 million in restructuring and other costs in fiscal year 2022, primarily consisting of consulting-related costs associated with the optimization of the Company’s operations, associate severance and separation costs, and equity award acceleration costs. There can be no assurance that these actions will achieve their intended benefits.

As a U.S. government contractor, we are subject to certain laws and regulations which may increase our costs of doing business and which subject us to certain compliance requirements and potential liabilities.

As a supplier to the U.S. government, we must comply with certain laws and regulations, including the Trade Agreements Act, the Buy American Act and the Federal Acquisition Regulation, relating to the formation, administration and performance of U.S. government contracts. These laws and regulations affect how we do business with government customers and, in some instances, impose added compliance and other costs on our business. From time to time, we are subject to governmental or regulatory inquiries or audits relating to our compliance with these laws and regulations. A violation of these specific laws and regulations, as well as others, could result in the imposition of fines and penalties or the termination of our U.S. government contracts and could harm our reputation and cause our business to suffer.

Our business is exposed to the credit risk of our customers which could adversely affect our operating results.

We perform periodic credit evaluations of our customers’ financial condition, and collateral is generally not required. We evaluate the collectability of accounts receivable based on numerous factors, including past transaction history with customers and their creditworthiness, and we provide a reserve for accounts that we believe to be uncollectible. A significant deterioration in the economy or the financial condition of our customers, including as a result of higher inflation and fluctuations in interest rates, a surge in COVID-19 infections, geopolitical events, or macroeconomic events, could have an adverse effect on collecting our accounts receivable, including longer payment cycles, increased collection costs and defaults.

Failure to accurately forecast customer demand could lead to excess inventories or inventory shortages, which could result in decreased operating margins, reduced cash flows and harm to our business.

To meet anticipated demand for our products, we may purchase products from manufacturers outside of our typical programs, including payment terms, and in advance of customer orders, which we hold in inventory and resell to customers. We are subject to the risk that we may be unable to sell excess products, such as PPE products, ordered from manufacturers. Inventory levels in excess of customer demand due to the difficulty of calibrating demand for such products, the concentration of demand for a limited number of SKUs, difficulties in product sourcing, including due to supply chain disruptions affecting us and our suppliers, or rapid changes in demand may result in inventory impairment or write-downs, and the sale of excess inventory at discounted prices could have an adverse effect on our operating results, financial condition and cash flows. Conversely, if we underestimate customer demand for our products or if our manufacturers fail to supply products we require at the time we need them, including due to supply chain disruptions affecting us and our suppliers, we may experience inventory shortages. Inventory shortages might delay shipments to customers and negatively impact customer relationships.

The risk of cancellation or rescheduling of orders may cause our operating results to fluctuate.

The cancellation or rescheduling of orders may cause our operating results to fluctuate. Although we strive to maintain relationships with our customers, there is an ongoing risk that orders may be cancelled or rescheduled due to fluctuations in our customers’ business needs or purchasing budgets, including changes in national and local government budgets. Additionally, although our customer base is diverse, ranging from individual machine shops to Fortune 1000 companies and large governmental agencies, the cancellation or rescheduling of significant orders by larger customers may still have a material adverse effect on our operating results from time to time.

Work stoppages, labor shortages or other disruptions, including those due to extreme weather conditions and in response to the COVID-19 pandemic, at transportation centers, shipping ports, our headquarters or our customer fulfillment centers may adversely affect our ability to obtain inventory and make deliveries to our customers.

Our ability to provide same-day shipping and next-day delivery of our core metalworking and MRO products is an integral component of our overall business strategy. Disruptions at transportation centers or shipping ports, including global and domestic locations, due to third-party work stoppages or labor shortages or severe weather conditions affect both our ability to maintain core products in inventory and deliver products to our customers on a timely basis, which may in turn adversely affect our customer relationships and results of operations. In addition, severe weather conditions, including winter storms, could adversely affect demand for our products in particularly hard-hit regions and impact our sales and/or our ability to deliver our products. Additionally, further or new implementation of shelter-in-place orders, social distancing orders, quarantines, port closures, increased border controls or closures, and other travel restrictions or government actions in response to COVID-19 may affect both our ability to maintain core products in inventory and to deliver products to our customers on a timely basis, which may in turn adversely affect our customer relationships and results of operations.

Our business depends on our ability to attract, train and retain qualified sales and customer service personnel and metalworking specialists.

Our business depends on our ability to attract, train and retain qualified sales and customer service personnel and metalworking specialists. We greatly benefit from having associates who are familiar with the products we sell and their applications, as well as associates, and in particular metalworking specialists, who can provide technical support to our customers. Qualified individuals of the requisite caliber and number needed to fill these positions may be difficult to hire and retain in sufficient numbers. Additionally, hiring and retaining such qualified individuals may be adversely impacted by global and domestic economic uncertainty, and increased competition for such qualified individuals. If we are unable to hire and retain associates capable of providing a high level of customer service and technical support, our operational capabilities and ability to provide differentiated services may be adversely affected.

The loss of key suppliers or contractors or key brands or supply chain disruptions could adversely affect our operating results.

We believe that our ability to offer a combination of well-known brand name products and competitively priced exclusive brand products is an important factor in attracting and retaining customers. Our ability to offer a wide range of products and services is dependent on obtaining adequate product supply and services from our key suppliers and contractors. The loss of, or a substantial decrease in, the availability of products or services from key suppliers or contractors at competitive prices, or the loss of a key brand, could cause our revenues and profitability to decrease. In addition, supply chain disruptions could continue to arise due to transportation interruptions and labor disputes or shortages. Our supply chain

has also been and may continue to be impacted by the COVID-19 pandemic, especially with respect to freight and labor availability, and may be impacted by other factors outside of our control, including macro-economic events, trade restrictions, political crises, other public health emergencies, or natural or environmental occurrences. Disruptions in our supply chain could result in a decrease in revenues and profitability.

Supply chain disruptions could adversely impact our business, operating results and financial position.

Disruptions in our supply chain due to events outside of our control, including natural and human-induced disasters, earthquakes, storms, hurricanes, floods, fires, droughts, tornados and other extreme weather, widespread contagious diseases or viruses such as COVID-19, geopolitical events, such as war, economic sanctions, civil unrest, rioting or terrorist attacks in the United States or countries in which we operate, in which our key suppliers are located or through which products we sell are transported or distributed, transportation disruptions, labor actions, raw material shortages, inadequate manufacturing capacity or utilization to meet demand, actions by governments and central banks that impact the flow of international goods, and the imposition of other trade limitations, prohibitions or sanctions that increase the costs of domestic and international trade and transportation, could restrict our ability to obtain products that our customers demand or to meet delivery expectations, which could adversely impact our business, operating results and financial position. For example, the outbreak of the COVID-19 pandemic and governmental actions taken in response disrupted, and may in the future disrupt, our operations and the operations of our suppliers, customers and companies who facilitate deliveries to our customers. Any such disruption or other catastrophic event could cause our distribution channels and networks to become limited or non-operational, adversely impact our ability to obtain or deliver products to our customers in a timely manner, limit our ability to meet customer demand, result in lost sales, increased costs, penalties, order cancellations or contract terminations, or adversely impact our customer relationships. Our ability to fulfill customer orders using same-day shipping and next-day delivery is an integral component of our business strategy upon which our customers rely, and any such disruption could adversely impact our business, operating results and financial position.

Changes to trade policies or trade relationships could make sourcing products from overseas more difficult and/or costlier as well as negatively affect the markets we sell into.

Changes to trade policies or trade relationships, including the imposition of significant restrictions, quotas, duties, tariffs, or moratoriums on economic activity with certain countries or regions, whether because of amendments to or elimination of existing trade agreements, the imposition of new or modified trade tariffs, or other governmental orders or sanctions, could have an adverse effect on our business. These changes and other changes to trade policies or trade relationships could adversely affect our ability to secure sufficient products to service our customers and/or result in increased product costs that we may not be able to pass on to our customers, resulting in lower margins. Additionally, these changes could adversely affect our foreign sales.

Opening or expanding our customer fulfillment centers exposes us to risks of delays and may affect our operating results.

In the future, as part of our long-term strategic planning, we may open new customer fulfillment centers to improve our efficiency, geographic distribution and market penetration. In addition, we intend to make, as we have in the past, capital improvements and operational enhancements to certain of our existing customer fulfillment centers. Moving or opening customer fulfillment centers and effecting such improvements requires a substantial capital investment, including expenditures for real estate and construction, and opening new customer fulfillment centers requires a substantial investment in inventory. Additionally, the opening of new customer fulfillment centers or the expansion of existing customer fulfillment centers would have an adverse impact on operating expenses as a percentage of sales, inventory turnover and return on investment in the periods prior to and for some time following the commencement of operations of each new customer fulfillment center or the completion of such expansions.

We establish insurance-related healthcare reserves based on historical claims experience and actuarial estimates, which could lead to adjustments in the future based on actual claims incurred.

We retain a significant portion of the risk under our healthcare insurance program. In fiscal year 2021, we began self-insuring for costs associated with associates’ health needs, which is limited by stop-loss coverage. Our self-insurance accruals are determined on an actuarial basis, based on historical claims experience and an estimate of claims incurred but not yet reported and other relevant factors. While we believe our estimation process is well designed, every estimation process is inherently subject to limitations. Fluctuations in the frequency, magnitude or number of claims make it difficult to predict the ultimate cost of claims and may lead to future adjustments of reported results of operations which, depending on the magnitude of such adjustments, may significantly affect our reported results or negatively affect the reliability of our reported results.

An interruption of operations at our headquarters or customer fulfillment centers could adversely impact our business.

Our business depends on maintaining operations at our co-located headquarters and customer fulfillment centers. A serious, prolonged interruption due to power outage, telecommunications outage, cyber-attack, terrorist attack, earthquake, storm, hurricane, flood, fire, drought, tornado and other extreme weather, pandemic or other interruption could have a material adverse effect on our business and financial results.

Goodwill and other indefinite-lived intangible assets recorded as a result of our acquisitions could become impaired.

As of September 3, 2022, our combined goodwill and other indefinite-lived intangible assets amounted to $722.9 million. To the extent we do not generate sufficient cash flows to recover the net amount of any investments in goodwill and other indefinite-lived intangible assets recorded, the investment could be considered impaired and subject to write-off. We expect to record further goodwill and other indefinite-lived intangible assets as a result of future acquisitions we may complete. Future amortization of such assets or impairments, if any, of goodwill or other indefinite-lived intangible assets would adversely affect our results of operations in any given period. If the financial performance of our business was to decline significantly, we could incur a material non-cash charge to our income statement for the impairment of goodwill and other indefinite-lived intangible assets.

Climate change and societal and governmental responses to climate change could adversely affect our business and performance, including indirectly through impacts on our customers.

Concerns over the long-term impacts of climate change have led, and will continue to lead, to governmental efforts around the world to mitigate those impacts. Consumers and businesses also may change their behavior on their own as a result of concerns regarding the impact of climate change, governmental regulations and public perceptions. We and our customers will need to respond to new laws and regulations as well as consumer and business preferences resulting from climate change concerns. The impact on our customers will likely vary depending on their specific attributes, including reliance on or role in carbon intensive activities. Among the impacts to us could be a drop in demand for our products and services, particularly in certain sectors. Our efforts to take these risks into account, including by increasing our business with climate-friendly companies, may not be effective in protecting us from the negative impact of new laws and regulations or changes in consumer or business behavior.

Additionally, climate change may present additional physical risks to our operations and lead to an increased frequency of unusual or extreme weather conditions, which could disrupt our supply chain or harm or disrupt our operations or those of our customers or suppliers.

Our principal shareholders exercise significant control over us.

We have two classes of common stock. Our Class A Common Stock has one vote per share and our Class B Common Stock has 10 votes per share. As of October 3, 2022, the Non-Executive Chairman of our Board of Directors, his sister, certain of their family members, including our President and Chief Executive Officer, and related trusts collectively owned 100% of the outstanding shares of our Class B Common Stock and approximately 3.5% of the outstanding shares of our Class A Common Stock, giving them control over approximately 65.9% of the combined voting power of our Class A Common Stock and our Class B Common Stock. Consequently, such shareholders will be able to elect all of the directors of the Company and to determine the outcome of any matter submitted to a vote of the Company’s shareholders for approval, including amendments to our certificate of incorporation and our second amended and restated by-laws, any proposed merger, consolidation or sale of all or substantially all of our assets and other corporate transactions. Because this concentrated control could discourage others from initiating any potential merger, takeover or other change of control transaction that may otherwise be beneficial to our shareholders, the market price of our Class A Common Stock may be adversely affected.

Risks Related to Our Indebtedness

The terms of our credit facilities and senior notes impose operating and financial restrictions on us, which may limit our ability to respond to changing business and economic conditions.

We currently have credit facilities and outstanding senior notes. For a description of these facilities and senior notes, please see Note 9, “Debt” in the Notes to Consolidated Financial Statements. We are subject to various operating and financial covenants under the credit facilities and senior notes which restrict our ability to, among other things, incur additional indebtedness, make particular types of investments, incur certain types of liens, engage in fundamental corporate changes, enter into transactions with affiliates or make substantial asset sales. Any failure to comply with these covenants

may constitute a breach under the credit facilities and senior notes, which could result in the acceleration of all or a substantial portion of any outstanding indebtedness and the termination of revolving credit commitments. Additionally, as interest rates rise, there may be fewer alternatives to our existing credit facilities for raising additional capital or such alternatives may be more expensive.

Our inability to maintain our committed and uncommitted credit facilities could materially adversely affect our liquidity and our business.

Our ability to manage our business and execute our business strategy is dependent, in part, on the continued availability of financing. With respect to committed facilities, lenders may decline to renew or extend credit facilities, or they may require stricter terms and conditions with respect to future facilities, and we may not find these terms and conditions acceptable. With respect to uncommitted facilities, lenders may cease making loans or demand payment of outstanding loans, which may overly restrict our ability to conduct our business successfully and adversely impact our liquidity and financial position.

Uncertainty about the future of LIBOR may adversely affect our business and financial results.

Borrowings under certain of our credit facilities currently use LIBOR as a benchmark for establishing the applicable interest rate. LIBOR is the subject of recent regulatory guidance and proposals for reform, which may cause LIBOR to cease to be used entirely or to perform differently than in the past. Regulators and industry groups have recommended alternatives for certain reference rates, such as the Secured Overnight Financing Rate (“SOFR”). We have adopted amendments to our credit facilities which provide for the transition to SOFR as the applicable benchmark rate. The future performance of SOFR, which is a relatively new reference rate with a limited history, may be hard to predict and could lead to additional volatility or an increase in the cost of our variable rate indebtedness, greater than what would occur using LIBOR. The consequences of these developments with respect to LIBOR and SOFR cannot be entirely predicted but could result in negative impacts to our financial position, liquidity and results of operations.

General Risk Factors

Disruptions or breaches of our IT systems, or violations of data privacy laws, could adversely affect us.

We believe that our IT systems are an integral part of our business and growth strategies. In particular, the COVID-19 pandemic has caused us to modify our business practices, including requiring many of our office-based associates to work from home. As a result, we are increasingly dependent upon our IT systems to operate our business and our ability to effectively manage our business depends on the security, reliability and adequacy of our IT systems. We also depend upon our IT systems to help process orders, to manage inventory and accounts receivable collections, to manage financial reporting, to purchase, sell and ship products efficiently and on a timely basis, to maintain cost-effective operations, to operate our websites and to help provide superior service to our customers. Our IT systems may be vulnerable to damage or disruption caused by circumstances beyond our control or anticipation, such as catastrophic events, power outages, natural disasters, computer system or network failures, computer viruses, and physical or electronic break-ins. In addition, our IT systems may be vulnerable to cyber-attacks, including the use of malicious codes, worms, phishing, spyware, denial of service attacks and ransomware, all of which are rapidly evolving and becoming increasingly sophisticated. Despite our efforts to ensure the integrity of our IT systems, as cyber-attacks evolve and become more difficult to detect and successfully defend against, one or more cyber-attacks might defeat the measures that we take to anticipate, detect, avoid or mitigate these threats. These cyber-attacks and any unauthorized access or disclosure of our customers’ information could compromise and expose sensitive information and damage our reputation. Cyber-attacks could also cause us to incur significant remediation costs, including the possibility of government fines, disrupt our operations and divert management attention and key IT resources.

Any material cyber-attack or failure of our IT systems to perform as we anticipate could disrupt our business and operations, result in transaction errors, loss of data, processing inefficiencies, downtime, litigation, government investigation or fines, substantial remediation costs (including potential liability for stolen assets or information and the costs of repairing system damage), the loss of sales and customers, and damage our reputation. In addition, changes to our IT systems could disrupt our business operations. Any one or more of these consequences could have a material adverse effect on our business, financial condition and results of operations. Additionally, our suppliers and customers also rely upon IT systems to operate their respective businesses. If any of them experience a cyber-attack or other cyber incident, this could adversely impact their operations, which may in turn impact or adversely affect our operations.

Regulatory authorities have increased their focus on how companies collect, process, use, store, share and transmit personal data. New privacy security laws and regulations, including the United Kingdom’s Data Protection Act 2018 (DPA),

the European Union General Data Protection Regulation 2016 (GDPR) that became effective May 2018, the California Consumer Protection Act that became effective on January 1, 2020, and other similar state privacy laws, pose increasingly complex compliance challenges, which may increase compliance costs, and any failure to comply with data privacy laws and regulations could result in significant penalties.

Our success is dependent on certain key management personnel.

Our success depends largely on the efforts and abilities of certain key senior management. The loss or disruption of the services of one or more of such key personnel could have a material adverse effect on our business and financial results. We do not maintain any key-man insurance policies with respect to any of our executive officers.

We are subject to litigation risk due to the nature of our business, which may have a material adverse effect on our business.

From time to time, we are involved in lawsuits or other legal proceedings that arise from business transactions or the operation of our business. Due to the nature of our business, these proceedings may, for example, relate to product liability claims, commercial disputes or employment matters. In addition, we could face claims over other matters, such as claims arising from our status as a government contractor, intellectual property matters, or corporate or securities law matters. The defense and ultimate outcome of lawsuits or other legal proceedings may result in higher operating expenses, which could have a material adverse effect on our business, financial condition or results of operations.

We may encounter difficulties with acquisitions and other strategic transactions which could harm our business.

We have completed several acquisitions and we expect to continue to pursue acquisitions and other strategic transactions, such as joint ventures, that we believe will either expand or complement our business in new or existing markets or further enhance the value and offerings we are able to provide to our existing or future potential customers.

Acquisitions and other strategic transactions present numerous risks and challenges, which could harm our business, including:

diversion of management’s attention from the normal operation of our business;

potential loss of key associates and customers of the acquired companies;

difficulties managing and integrating operations in geographically dispersed locations;

the potential for deficiencies in internal controls at the acquired companies;

increases in our expenses and working capital requirements, which reduce our return on invested capital;

lack of experience operating in the geographic market or industry sector of the acquired companies; and

exposure to unanticipated liabilities of the acquired companies.

To integrate acquired businesses, we must implement our management information systems, operating systems and internal controls, and assimilate and manage the personnel of the acquired operations. The difficulties of this integration may be further complicated by geographic distances. The integration of acquired businesses may not be successful and could result in disruption to other parts of our business.

We are subject to environmental, health and safety laws and regulations.

We are subject to federal, state, local, foreign and provincial environmental, health and safety laws and regulations. Fines and penalties may be imposed for non-compliance with applicable environmental, health and safety requirements and the failure to have or to comply with the terms and conditions of required permits. The failure by us to comply with applicable environmental, health and safety requirements could result in fines, penalties, enforcement actions, third-party claims for property damage and personal injury, requirements to clean up property or to pay for the costs of cleanup, or regulatory or judicial orders requiring corrective measures, which could have a material adverse effect on our business, financial condition or results of operations. Additionally, such actions could negatively impact our reputation in the impacted geographic market and more broadly.

Social and environmental responsibility policies and provisions may be difficult to comply with and may impose costs on us.

There is an increasing focus on corporate social and environmental responsibility in our industry. An increasing number of our customers have adopted, or may adopt, procurement policies that include social and environmental responsibility provisions that their suppliers should comply with, or they may seek to include such provisions in their procurement terms and conditions. This corporate social and environmental responsibility influence is expanding to other

stakeholders such as investors, suppliers, associates and communities. We currently voluntarily comply with the sustainability standards set forth by various sustainability initiatives and organizations. These social and environmental responsibility practices, policies, provisions and initiatives are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with. In addition, the failure by us to take action or otherwise comply with the policies of our customers may negatively impact our customer relationships or reputation, which may adversely impact our business and results of operations.

Our common stock price may be volatile.

We believe factors such as fluctuations in our operating results or the operating results of our competitors, changes in economic conditions in the market sectors in which our customers operate, notably the durable and non-durable goods manufacturing industry, which accounts for a substantial portion of our revenues, and changes in general market conditions, including as a result of inflation, rising interest rates, a surge in COVID-19 infections and geopolitical events could cause the market price of our Class A Common Stock to fluctuate substantially.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

‎

ITEM 2. PROPERTIES.

We have customer fulfillment centers in or near the following locations:

We maintain 38 warehouses, of which 36 are located in North America and two are located in Europe. This count includes locations which were previously referred to as either branches or customer fulfillment centers. Of these locations, 13 are new to MSC as a result of the fiscal year 2022 acquisitions. Our warehouses range in size from approximately 1,000 to 110,000 square feet. We also maintain 10 regional inventory centers, all of which are located in the United States, which vary in size from approximately 7,000 to 22,000 square feet. Most of these warehouses and regional inventory centers are leased. These leases will expire at various periods, with the longest extending to fiscal year 2031. The aggregate annual lease payments on the leased warehouses, regional inventory centers and customer fulfillment centers in fiscal year 2022 were approximately $9.6 million.

During fiscal year 2021, the Company announced plans to relocate its Long Island Customer Service Center (“CSC”) to a smaller facility in Melville, New York. In connection with the announcement, we signed a 10-year lease to occupy approximately 26,000 square feet in an office building in Melville, New York, which commenced in September 2021. The Company subsequently entered into a Purchase and Sale Agreement to sell the Long Island CSC, which closed during the fourth quarter of fiscal year 2022.

ITEM 3. LEGAL PROCEEDINGS.

For information related to legal proceedings, see the discussion under the caption “Legal Proceedings” in Note 15, “Commitments and Contingencies” in the Notes to Consolidated Financial Statements.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

‎

PART II.

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

MSC’s Class A Common Stock is traded on the NYSE under the symbol “MSM.” MSC’s Class B Common Stock is not traded in any public market.

In 2003, our Board of Directors instituted a policy of paying regular quarterly cash dividends to our shareholders. The Company paid aggregate annual regular cash dividends of $3.00 per share in fiscal year 2022. The Company paid aggregate annual cash dividends of $6.50 per share in fiscal year 2021, consisting of a special cash dividend of $3.50 per share and total quarterly regular cash dividends of $3.00 per share. The Company expects its practice of paying quarterly cash dividends on its common stock will continue, although the payment of future dividends is at the discretion of the Company’s Board of Directors and will depend upon the Company’s earnings, capital requirements, financial condition and other factors.

On October 11, 2022, the Company’s Board of Directors declared a quarterly cash dividend of $0.79 per share, payable on November 29, 2022 to shareholders of record at the close of business on November 15, 2022. The dividend will result in a payout of approximately $44.1 million, based on the number of shares outstanding at October 3, 2022.

The approximate number of holders of record of MSC’s Class A Common Stock as of October 3, 2022 was 532. The number of holders of record of MSC’s Class B Common Stock as of October 3, 2022 was 19.

Purchases of Equity Securities

The following table sets forth repurchases by the Company of its outstanding shares of Class A Common Stock, which are listed on the NYSE, during the quarter ended September 3, 2022:

________________________

⁽¹⁾ During the quarter ended September 3, 2022, 3,748 shares of our Class A Common Stock were withheld by the Company as payment to satisfy our associates’ tax withholding liability associated with our share-based compensation program and are included in the total number of shares purchased.

⁽²⁾ Activity is reported on a trade date basis.

⁽³⁾ On June 29, 2021, the Company’s Board of Directors terminated the MSC Stock Repurchase Plan, which was established during fiscal year 1999, and authorized a new share repurchase program (the “Share Repurchase Program”) to purchase up to 5,000,000 shares of the Company’s Class A Common Stock. There is no expiration date for the Share Repurchase Program. As of September 3, 2022, the maximum number of shares of the Company’s Class A Common Stock that may yet be repurchased under the Share Repurchase Program was 4,700,000 shares.

‎

Performance Graph

The following stock price performance graph and accompanying information is not deemed to be “soliciting material” or to be “filed” with the SEC, nor shall such information be incorporated by reference into any filings under the Securities Act of 1933, as amended, or under the Securities Exchange Act of 1934, as amended, which we refer to as the Exchange Act, or be subject to the liabilities of Section 18 of the Exchange Act, regardless of any general incorporation language in any such filing.

The following graph compares the cumulative total return on an investment in our Class A Common Stock with the cumulative total return on an investment in each of the S&P Midcap 400 Index and the Dow Jones US Industrial Supplier Index.

The graph assumes $100 invested at the closing price of our Class A Common Stock on the NYSE and each index on September 2, 2017 and assumes that all dividends paid on such securities during the applicable fiscal years were reinvested. Indices are calculated on a month-end basis. The comparisons in this table are based on historical data and are not intended to forecast or to be indicative of the possible future performance of our Class A Common Stock.

Cumulative Total Shareholder Return

for the Period from September 2, 2017 through September 3, 2022

ITEM 6. [RESERVED].

‎

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Overview

MSC is a leading North American distributor of a broad range of metalworking and MRO products and services. We help our customers drive greater productivity, profitability and growth with approximately 2.1 million products, inventory management and other supply chain solutions, and deep expertise from more than 80 years of working with customers across industries. We continue to implement our strategies to gain market share, generate new customers, increase sales to existing customers, and diversify our customer base.



Our experienced team of approximately 7,000 associates works with our customers to help drive results for their businesses, from keeping operations running efficiently today to continuously rethinking, retooling and optimizing for a more productive tomorrow. We offer approximately 2.1 million active, saleable SKUs through our catalogs; our brochures; our eCommerce channels, including the MSC website; our inventory management solutions; and our customer care centers, customer fulfillment centers, regional inventory centers and warehouses. We service our customers from six customer fulfillment centers, 10 regional inventory centers and 38 warehouses. Many of our products are carried in stock, and orders for these in-stock products are typically fulfilled the day on which the order is received.

Our business model focuses on providing overall procurement cost reduction and just-in-time delivery to meet our customers’ needs. We focus on offering inventory, process and procurement solutions that reduce MRO supply chain costs and improve plant floor productivity for our customers. We will seek to continue to achieve cost reductions throughout our business through cost-saving strategies and increased leverage from our existing infrastructure, and continue to provide additional procurement cost-savings solutions to our customers through technology such as our CMI, VMI and vending programs. Our field sales and service associate headcount was 2,536 at September 3, 2022 compared to 2,398 at August 28, 2021 and 2,263 at August 29, 2020.

The chart below displays a two-year comparison of our net sales from fiscal year 2021 through fiscal year 2022:

⁽¹⁾Pricing and other is comprised of changes in customer and product mix, discounting and other items.

⁽²⁾Fiscal year 2022 includes a 53^rd week during the reporting period, including the net sales of acquisitions during the 53^rd week.

Highlights

Highlights during fiscal year 2022 include the following:

We generated $246.2 million of cash from operations compared to $224.5 million in fiscal year 2021.

We repurchased and immediately retired $22.1 million of MSC’s Class A Common Stock compared to $67.5 million in fiscal year 2021.

We paid out $167.4 million in regular cash dividends compared to $362.7 million in cash dividends in fiscal year 2021, comprised of special and regular cash dividends of $195.4 million and $167.3 million, respectively.

In June 2022, we acquired Engman-Taylor for aggregate consideration of $24.8 million.

In July 2022, the sale of our Long Island CSC closed, resulting in a gain on sale of $10.1 million.

In August 2022, we acquired Tower Fasteners for aggregate consideration of $33.9 million, which includes a post-closing working capital adjustment of approximately $1.0 million that is subject to finalization.

We incurred $15.8 million in restructuring and other costs compared to $31.4 million in fiscal year 2021. Restructuring and other costs primarily consisted of consulting-related costs associated with the optimization of the Company’s operations, associate severance and separation costs, and equity award acceleration costs. The prior fiscal year also included operating lease asset impairment charges, net of gains related to settlement of lease liabilities, and other exit-related costs associated with our internal restructuring due to our sales workforce realignment and enhanced customer support model.

Recent Developments

Progress on Mission Critical

As previously disclosed, we initiated a company-wide project, which we refer to as “Mission Critical,” to accelerate market share capture and improve profitability over the period through fiscal year 2023. Among the Mission Critical initiatives to realize growth, we began and expect to continue investing in our market-leading metalworking business by adding to our metalworking specialist team, introducing value-added services to our customers, expanding our vending, VMI and in-plant solutions programs, building out our sales force, and diversifying our customers and end-markets. We also are focused on improving profitability through the implementation of various pricing strategies and critical structural cost reductions in order to improve return on invested capital. We anticipate that the cost reductions will be comprised of savings in the areas of sales and service, supply chain and general and administrative expenses, and include initiatives to optimize our distribution center network and real estate footprint, renegotiate supplier contracts, and redesign our talent acquisition and retention approach.

Relocation and Sale of Long Island CSC

In December 2020, we announced plans to relocate our Long Island CSC to a smaller facility. In connection with the announcement, we signed a 10-year lease to occupy approximately 26,000 square feet in an office building in Melville, New York, which commenced in September 2021. In furtherance of these plans, we entered into a Purchase and Sale Agreement to sell our Long Island CSC. This transaction closed during the fourth quarter of fiscal year 2022.

Impact of COVID-19 and Other Economic Trends

In recent years, the COVID-19 pandemic has impacted the Company’s operations; however, demand from our traditional manufacturing end markets has recovered as most restrictions implemented earlier in the pandemic have been lifted. In conjunction with the lifting of pandemic restrictions and the ensuing economic recovery, the United States experienced and continues to experience disruptions in the supply of certain products and services and disruptions in labor availability. These disruptions have contributed to a highly inflationary environment which has affected the price and, at times, the availability of certain products and services necessary for the Company’s operations, including fuel, labor and certain products the Company sells or the inputs for such products. Such disruptions have impacted, and may continue to impact in the future, the Company’s business, financial condition and results of operations. These disruptions are also impacting our customers and their ability to conduct their business or purchase our products and services.

As a result of recent high inflation, increasing freight, labor and fuel costs, and supply chain disruptions, the Company has implemented price realization strategies in response to increased costs the Company faces. Furthermore, in light of disruptions to availability and increased or uncertain shipping times, the Company is maintaining higher purchasing levels to ensure sufficient inventory supply to meet customer demand. The extent to which the COVID-19 pandemic and the

evolving macroeconomic environment will continue to impact the Company’s business, financial condition and results of operations is highly uncertain.

Acquisitions of Engman-Taylor and Tower Fasteners

In June 2022, the Company acquired certain assets and assumed certain liabilities of Engman-Taylor, a Menomonee Falls, Wisconsin-based distributor of metalworking tools and supplies, for aggregate consideration of $24.8 million. Engman-Taylor will continue to go to market under its current name as an MSC company.

In August 2022, the Company acquired 100% of the outstanding equity of Tower Fasteners, a Holtsville, New York-based distributor of OEM fasteners and components, for aggregate consideration of $33.9 million, which includes a post-closing working capital adjustment of approximately $1.0 million that is subject to finalization. The acquisition, which was made through the Company’s subsidiary, AIS, complements and expands the Company’s presence in the OEM fastener market. Tower Fasteners will continue to go to market under its current name as an MSC company.

Our Strategy

Our primary objective is to grow sales profitably while offering our customers highly technical and high-touch solutions to solve their most complex challenges on the plant floor. Our strategy is to complete the transition from being a spot-buy supplier to a mission-critical partner to our customers. We will selectively pursue strategic acquisitions that expand or complement our business in new and existing markets or further enhance the value and offerings we provide.

Business Environment

We utilize various indices when evaluating the level of our business activity, including the Metalworking Business Index (the “MBI”) and the Industrial Production (“IP”) index. Approximately 70% of our revenues came from sales in the manufacturing sector during the fourth quarter of fiscal year 2022. Through statistical analysis, we have found that trends in our customers’ activity have correlated to changes in the MBI and the IP index. The MBI is a sentiment index developed from a monthly survey of the U.S. metalworking industry, focusing on durable goods manufacturing. For the MBI, a value below 50.0 generally indicates contraction and a value above 50.0 generally indicates expansion. The IP index measures short-term changes in industrial production. Growth in the IP index from month to month indicates growth in the manufacturing, mining and utilities industries. The MBI and the IP index over the fourth quarter of fiscal year 2022 and the fourth quarter and fiscal year averages were as follows:

During fiscal year 2022, the MBI average exceeded 50.0, which indicated growth in manufacturing during the period, albeit declining in recent months. The IP index averaged 103.0 during the same period, an improvement from the 2021 revised average of 98.6. The recent trending in these indices is primarily supported by the recovery in economic conditions related to the gradual lifting of government-imposed restrictions on economic activity and the abatement of the COVID-19 pandemic. See “Impact of COVID-19 and Other Economic Trends” above. Beginning in the second half of calendar year 2021 and continuing throughout calendar year 2022, the United States has experienced supply chain disruptions and significant levels of inflation, which has included higher prices for labor, freight, fuel and the products that the Company sells. The Company has implemented price realization strategies in response to increased costs the Company faces. We will continue to monitor the current economic conditions for the impact on our customers and markets and assess both risks and opportunities that may affect our business and operations.

Results of Operations

Fiscal Year Ended September 3, 2022 Compared to the Fiscal Year Ended August 28, 2021

The table below summarizes the Company’s results of operations both in dollars (in thousands) and as a percentage of net sales for the periods indicated:

Net Sales

Net sales increased 13.8%, or $448.7 million, from the prior fiscal year. The $448.7 million increase in net sales was comprised of approximately $179.3 million of higher sales volume, approximately $159.4 million from improved pricing, inclusive of changes in customer and product mix, discounting and other items, approximately $77.6 million in sales attributable to an extra week in fiscal year 2022, and approximately $35.4 million of net sales from recent acquisitions, partially offset by approximately $3.0 million of unfavorable foreign exchange impact. Of the $448.7 million increase in net sales during the fiscal year ended September 3, 2022, national account customer sales increased by approximately $218.1 million, sales to our core and other customers increased by approximately $207.8 million and sales from recent acquisitions were approximately $35.4 million, partially offset by a decrease in our government customer sales by approximately $12.6 million.

The table below shows, among other things, the annual 2022 average daily sales (“ADS”) by total company and by customer type compared to the same periods in the prior fiscal year:

We believe that our ability to transact business with our customers through various electronic portals and directly through the MSC website gives us a competitive advantage over smaller suppliers. Sales made through our eCommerce platforms, including sales made through EDI systems, VMI systems, XML ordering-based systems, vending, hosted systems and other electronic portals, represented 61.7% of consolidated net sales for fiscal year 2022, compared to 60.0% of consolidated net sales for fiscal year 2021. These percentages of consolidated net sales do not include eCommerce sales from our recent acquisitions.

Gross Profit

Gross profit margin was 42.2% in fiscal year 2022, as compared to 41.1% in fiscal year 2021. The increase in gross profit margin was the result of improved price realization and positive spread between sales price and cost of goods sold. In addition, results for fiscal year ended August 28, 2021 include the prior year PPE-related inventory write-downs of $30.1 million, which reduced the carrying value of certain PPE-related inventory to their estimated net realizable value. No such inventory write-downs occurred for the fiscal year ended September 3, 2022.

Operating Expenses

Operating expenses increased 9.0% to $1.1 billion in fiscal year 2022, as compared to $994.5 million in fiscal year 2021. Operating expenses were 29.4% of fiscal year 2022 net sales, as compared to 30.7% for fiscal year 2021. The increase in operating expenses was primarily attributable to an increase in payroll and payroll-related costs and freight costs associated with higher sales volumes.

Payroll and payroll-related costs were approximately 57.5% of total operating expenses for fiscal year 2022, as compared to approximately 56.9% for fiscal year 2021. Payroll and payroll-related costs, which include salary, incentive compensation, sales commission, and fringe benefit costs, increased by $57.6 million for fiscal year 2022. All of these components of payroll and payroll-related costs increased compared to the prior fiscal year. 

Freight expense was $155.5 million for fiscal year 2022, as compared to $133.7 million for fiscal year 2021. The primary drivers of this increase were increased sales volume and higher fuel-related charges due to increased commodity costs.

Travel and entertainment expense was $7.3 million for fiscal year 2022, as compared to $3.6 million for fiscal year 2021. This increase was due to the Company’s easing of travel restrictions resulting from the COVID-19 pandemic.

Impairment Loss, Net

In September 2020, the Company prepaid approximately $26.7 million for the purchase of nitrile gloves to be sourced from manufacturers in Asia and experienced significant delays in obtaining possession of this PPE. The Company evaluated the potential recoverability of these assets and, as a result, recorded an impairment charge of $26.7 million in the first quarter of fiscal year 2021 to reflect the fact that the Company would not ultimately obtain this PPE or recover its related prepayment. During fiscal year 2021, the Company entered into a legal settlement agreement with a vendor and, as a result, received $20.8 million of loss recovery related to this prepayment, which resulted in a net impairment charge of $5.9 million for fiscal year 2021. The Company continues to pursue its legal avenues for recovery of the remaining loss. We also incurred $1.6 million of legal costs associated with this matter during fiscal year 2021 that are included in Operating expenses.

Restructuring and Other Costs

For fiscal year 2022, we incurred approximately $15.8 million in restructuring and other costs related to the optimization of the Company’s operations. These charges primarily consisted of consulting-related costs associated with the optimization of the Company’s operations, associate severance and separation costs, and equity award acceleration costs. The prior fiscal year also included operating lease asset impairment charges, net of gains related to settlement of lease liabilities, and other exit-related costs associated with our internal restructuring due to our sales workforce realignment and enhanced customer support model. See Note 13, “Restructuring and Other Costs” in the Notes to Consolidated Financial Statements for additional information.

Gain on Sale of Property

During fiscal year 2021, the Company entered into a Purchase and Sale Agreement to sell its 170,000-square foot Long Island CSC in Melville, New York. During the fourth quarter of fiscal year 2022, the Company disposed of the building with a sale price of $25.5 million, which resulted in a gain on sale of property of $10.1 million after the settlement of certain closing costs and fees, which is included in the Consolidated Statement of Income for the fiscal year ended September 3, 2022.

Income from Operations

Income from operations increased 55.3% to $468.7 million in fiscal year 2022, as compared to $301.8 million in fiscal year 2021. This increase was primarily attributable to the increase in sales and gross margin as well as impacts of the prior year impairment loss, PPE-related inventory write-down within gross margin and impairment charges for operating lease assets within restructuring and other costs as discussed above, which did not recur in fiscal year 2022.

Provision for Income Taxes

Our effective tax rate for fiscal year 2022 was 24.5%, as compared to 24.4% in fiscal year 2021. See Note 7, “Income Taxes” in the Notes to Consolidated Financial Statements for further information.

Net Income

The factors which affected net income for fiscal year 2022, as compared to the prior fiscal year, have been discussed above.

Liquidity and Capital Resources

As of September 3, 2022, we had $43.5 million in cash and cash equivalents, substantially all with well-known financial institutions. Historically, our primary financing needs have been to fund our working capital requirements

necessitated by our sales growth and the costs of acquisitions, new products, new facilities, facility expansions, investments in vending solutions, technology investments, and productivity investments. Cash generated from operations, together with borrowings under our credit facilities and net proceeds from the private placement notes, have been used to fund these needs, to repurchase shares of the Company’s Class A Common Stock from time to time, and to pay dividends to our shareholders.

As of September 3, 2022, total borrowings outstanding, representing amounts due under our credit facilities and notes, as well as all finance leases and financing arrangements, were $794.6 million, net of unamortized debt issuance costs of $1.4 million, as compared to total borrowings of $786.0 million, net of unamortized debt issuance costs of $1.9 million, as of August 28, 2021. The increase was driven by higher net borrowings under our committed credit facility. See Note 9, “Debt” in the Notes to Consolidated Financial Statements for more information about these balances.

We believe, based on our current business plan, that our existing cash, financial resources and cash flow from operations will be sufficient to fund necessary capital expenditures and operating cash requirements for at least the next 12 months. We will continue to evaluate our financial position in light of future developments, particularly those relating to changes in macroeconomic conditions, including variations in foreign currency exchange rates, commodity and energy prices, labor and supply costs, inflation, and interest rates, and to take appropriate action as it is warranted.

The table below summarizes information regarding the Company’s cash flows for the periods indicated:

Operating Activities

Net cash provided by operating activities for fiscal years 2022 and 2021 was $246.2 million and $224.5 million, respectively. The increase was primarily due to the following:

an increase in net income as described above; partially offset by

an increase in the change in accounts receivable primarily attributable to higher sales volume; and

a decrease in the change in accounts payable and accrued liabilities due to a greater increase in accounts payable in fiscal year 2021 from fiscal year 2020 levels due to the COVID-19 pandemic that did not repeat in fiscal year 2022.

The table below summarizes certain information regarding the Company’s operations:

⁽¹⁾ Working Capital is calculated as current assets less current liabilities.

⁽²⁾ Current Ratio is calculated by dividing total current assets by total current liabilities.

⁽³⁾ Days’ Sales Outstanding is calculated by dividing accounts receivable by net sales, using trailing two months sales data.

⁽⁴⁾ Inventory Turnover is calculated by dividing total cost of goods sold by inventory, using a 13-month trailing average inventory.

Working capital increased compared to August 28, 2021 while the current ratio declined slightly. The increase in working capital presented in the table above was primarily due to increases in both accounts receivable and inventories, partially offset by an increase in the current portion of debt and accounts payable. The current ratio declined slightly, primarily due to the increase in the current portion of debt.

The increase in inventories of $91.5 million from August 28, 2021 to September 3, 2022 was primarily due to an increasing sales trend as well as higher supplier costs and ongoing challenges in the supply chain requiring earlier purchasing to meet customer demand. Higher inventory purchasing levels also drove the $31.0 million increase in accounts payable during this period. Accounts receivable increased $127.2 million due to increased sales levels during fiscal year 2022. These balances were also impacted by fiscal year 2022 acquisitions. See Note 5, “Business Combinations” in the Notes to Consolidated Financial Statements for more information about these acquired balances.

The increase in days’ sales outstanding as of September 3, 2022 as compared to August 28, 2021 was primarily due to the receivables portfolio consisting of a greater percentage of our national account program sales, which typically have longer payment terms.

Inventory turnover as of September 3, 2022 declined relative to August 28, 2021 due to increasing inventory levels as a result of higher supplier costs, ongoing challenges in the supply chain and to meet customer demand.

Investing Activities

Net cash used in investing activities for fiscal years 2022 and 2021 was $94.5 million and $75.7 million, respectively. The use of cash for fiscal year 2022 included expenditures for property, plant and equipment and the acquisitions of Engman-Taylor and Tower Fasteners, partially offset by the net proceeds received from the sale of the Long Island CSC. The use of cash for fiscal year 2021 included expenditures for property, plant and equipment and the acquisitions of Wm. F. Hurst Co., LLC and the outsourcing and logistics businesses of TAC Insumos Industriales, S. de R.L. de C.V. and certain of its affiliates.

Financing Activities

Net cash used in financing activities for fiscal years 2022 and 2021 was $148.1 million and $233.7 million, respectively.

The major components contributing to the use of cash for fiscal year 2022 were primarily the following:

$167.4 million of regular dividends paid during fiscal year 2022 compared to $362.7 million of regular and special dividends paid during fiscal year 2021;

$27.4 million in aggregate repurchases of our Class A Common Stock during fiscal year 2022 compared to $71.3 million in aggregate repurchases of our Class A Common Stock during fiscal year 2021;

net borrowings under our credit facilities of $9.5 million during fiscal year 2022 compared to net borrowings of $184.3 million during fiscal year 2021; and

proceeds from the exercise of common stock options of $34.7 million during fiscal year 2022 compared to $29.7 million in fiscal year 2021.

Debt

Credit Facilities

In April 2017, the Company entered into a $600.0 million revolving credit facility which was subsequently amended and extended in August 2021. As of September 3, 2022, the Company also had three uncommitted credit facilities, totaling $208.0 million of maximum uncommitted availability. See Note 9, “Debt” in the Notes to Consolidated Financial Statements for more information about our credit facilities. As of September 3, 2022, we were in compliance with the operating and financial covenants of our credit facilities.

Subsequent to fiscal year 2022, the Company made additional payments of $45.0 million through October 3, 2022 on its revolving credit facility. The current unused balance of $394.7 million from the revolving credit facility, which is reduced by outstanding letters of credit, is available for working capital purposes if necessary.  See Note 9, “Debt” in the Notes to Consolidated Financial Statements for more information about these balances.

Private Placement Debt and Shelf Facility Agreements

In July 2016, we completed the issuance and sale of unsecured senior notes. In January 2018, we entered into two note purchase and private shelf facility agreements (together, the “Shelf Facility Agreements”). In June 2018 and March 2020, we entered into additional note purchase agreements. Pursuant to the terms of the Shelf Facility Agreements, no new

unsecured senior notes may be issued and sold after January 12, 2021. See Note 9, “Debt” in the Notes to Consolidated Financial Statements for more information about these transactions.

Leases and Financing Arrangements

As of September 3, 2022, certain of our operations were conducted on leased premises. These leases are for varying periods, the longest extending to fiscal year 2031. In addition, we are obligated under certain equipment and automobile operating and finance leases, which expire on varying dates through fiscal year 2026.

From time to time, we enter into financing arrangements with vendors to purchase certain information technology equipment or software.

Capital Expenditures

We continue to invest in sales productivity initiatives, eCommerce and vending platforms, customer fulfillment centers and distribution network, and other infrastructure and technology.

Future Liquidity Outlook

Our future contractual obligations as of September 3, 2022 (in thousands) are as follows:

⁽¹⁾Certain of our operations are conducted on leased premises. These leases (most of which require us to provide for the payment of real estate taxes, insurance and other operating costs) are for varying periods, the longest extending to fiscal year 2031. In addition, we are obligated under certain equipment and automobile operating leases, which expire on varying dates through fiscal year 2025. See Note 10, “Leases” in the Notes to Consolidated Financial Statements for additional information on our operating lease arrangements.

⁽²⁾As of September 3, 2022, the Company has entered into various finance leases for certain IT equipment, which expire on varying dates through fiscal year 2026. See Note 10, “Leases” in the Notes to Consolidated Financial Statements for additional information on our finance lease arrangements.

⁽³⁾Excludes debt issuance costs.

⁽⁴⁾Interest payments for long-term debt are based on principal amounts and coupons or contractual rates at fiscal year-end.

As of September 3, 2022, the Company had recorded a non-current liability of $8.0 million for tax uncertainties and interest. This amount is excluded from the table above, as the Company cannot make reliable estimates of these cash flows by period. See Note 7, “Income Taxes” in the Notes to Consolidated Financial Statements.

We have not entered into any off-balance sheet arrangements and there are no commitments or obligations (including, but not limited to, guarantees; retained or contingent interests in assets transferred; contractual arrangements that support the credit, liquidity or market risk for transferred assets; or risk related to derivatives or other financial products related to our equity securities), including contingent obligations, with unconsolidated entities or persons that had during the periods presented herein or are reasonably likely to have a material impact on the financial statements.

Critical Accounting Estimates

We make estimates, judgments and assumptions in determining the amounts reported in the Consolidated Financial Statements and accompanying notes. Estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. The estimates are used to form the basis for making judgments about the carrying values of assets and liabilities and the amount of revenues and expenses reported that are not readily apparent from other sources. Actual results may differ from these estimates. Our significant accounting policies are described in the Notes to Consolidated Financial Statements. The accounting policies described below are impacted by our critical accounting estimates. More information on the critical accounting estimates can be found in Note 1, “Business and Summary of Significant Accounting Policies” in the Notes to Consolidated Financial Statements.

Allowance for Credit Losses

We perform periodic credit evaluations of our customers’ financial condition, and collateral is generally not required. The Company considers several factors to estimate the allowance for credit losses in accounts receivable, including the age of the receivables and the historical ratio of actual write-offs to the age of the receivables, and also reflects the

adoption of the new accounting standard related to current expected credit losses in the most recent fiscal year. See Note 1, “Business and Summary of Significant Accounting Policies” in the Notes to Consolidated Financial Statements for more information.

Inventories

Inventory is reflected at the lower of weighted average cost or net realizable value considering future demand, market conditions and physical condition of the inventory. We write-down inventories for shrinkage and slow-moving or obsolete inventory. The analysis includes inventory levels, sales information, historical write-down information, and the on-hand quantities relative to the sales history for the product.

Goodwill and Other Indefinite-Lived Intangible Assets

The purchase price of an acquired company is allocated between the intangible assets and the net tangible assets of the acquired business with the residual of the purchase price recorded as goodwill. The determination of the value of the intangible assets acquired involves certain judgments and estimates. These judgments can include, but are not limited to, the cash flows that an asset is expected to generate in the future and the appropriate weighted average cost of capital. The Company annually reviews goodwill at the reporting unit level and intangible assets that have indefinite lives for impairment in its fiscal fourth quarter and when events or changes in circumstances indicate the carrying values of these assets might exceed their current fair values.

Income Taxes

The Company recognizes deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax assets and liabilities are determined based on the differences between the financial reporting and tax basis of assets and liabilities, using enacted tax rates in effect for the year in which the differences are expected to reverse. The tax balances and income tax expense recognized by the Company are based on management’s interpretations of the tax laws of multiple jurisdictions. Income tax expense reflects the Company’s best estimates and assumptions regarding, among other items, the level of future taxable income, interpretation of tax laws and uncertain tax positions.

Other

Other significant accounting policies, not involving the same level of measurement uncertainties as those discussed above, are nevertheless important to an understanding of the financial statements. Policies such as revenue recognition, depreciation, intangibles, accruals related to self-insured associate health costs, long-lived assets and warranties require judgments on complex matters that are often subject to multiple external sources of authoritative guidance such as the Financial Accounting Standards Board and the SEC. Possible changes in estimates or assumptions associated with these policies are not expected to have a material effect on the financial condition or results of operations of the Company. More information on these additional accounting policies can be found in Note 1, “Business and Summary of Significant Accounting Policies” in the Notes to Consolidated Financial Statements.

Recently Issued Accounting Pronouncements

Refer to Note 1, “Business and Summary of Significant Accounting Policies” in the Notes to Consolidated Financial Statements.

‎

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Interest Rate Risks

We are exposed to interest rate risk on our variable-rate debt. During fiscal year 2021, the Company entered into two uncommitted credit facilities and amended its existing uncommitted credit facility entered into during fiscal year 2020. Additionally, the Company amended its committed credit facility during fiscal year 2021. See Note 9, “Debt” in the Notes to Consolidated Financial Statements for more information about the credit facilities.

In July 2017, the Financial Conduct Authority (the authority that regulates LIBOR) announced it intends to stop compelling banks to submit rates for the calculation of LIBOR, with full discontinuation by June 2023. The U.S. Federal Reserve has chosen SOFR as the preferred alternate rate to LIBOR for use in derivatives and other financial contracts currently indexed to LIBOR. During fiscal year 2022, we amended our uncommitted credit facilities to allow for SOFR as the primary reference rate as a replacement for LIBOR. Our amended revolving credit facility also provides for the transition from LIBOR to SOFR and is expected to transition during fiscal year 2023. As SOFR is a relatively new reference rate with a limited history, there may or may not be more volatility than other reference rates such as LIBOR, which may result in increased borrowing costs for the Company. We will continue to actively assess the related opportunities and risks involved in this transition.

Borrowings under our committed and uncommitted credit facilities are subject to fluctuations in the interest rate, which have a corresponding effect on our interest expense. A 100-basis point increase or decrease in interest rates would impact our interest costs by approximately $4.7 million under our current capital structure. We have monitored and will continue to monitor our exposure to interest rate fluctuations.

In addition, our interest income is most sensitive to changes in the general level of interest rates. In this regard, changes in interest rates affect the interest earned on our cash.

We do not currently use interest rate derivative instruments to manage exposure to interest rate changes.

Foreign Currency Risks

Approximately 95% of our sales are denominated in U.S. dollars and are primarily from customers in the United States. As a result, currency fluctuations are currently not material to our operating results. To the extent that we engage in more significant international sales in the future, an increase in the value of the U.S. dollar relative to foreign currencies could make our products less competitive in international markets. We have monitored and will continue to monitor our exposure to currency fluctuations.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

‎

Report of Independent Registered Public Accounting Firm

To the Shareholders and the Board of Directors of MSC Industrial Direct Co., Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of MSC Industrial Direct Co., Inc. (the Company) as of September 3, 2022 and August 28, 2021, the related consolidated statements of income, comprehensive income, shareholders’ equity and cash flows for each of the three years in the period ended September 3, 2022, and the related notes and the financial statement schedule listed in the Index at Item 15(a) (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at September 3, 2022 and August 28, 2021, and the results of its operations and its cash flows for each of the three years in the period ended September 3, 2022, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of September 3, 2022, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), and our report dated October 20, 2022 expressed an unqualified opinion thereon.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the account or disclosure to which it relates.

/s/ Ernst & Young LLP

We have served as the Company’s auditor since 2002.

Jericho, New York

October 20, 2022

‎

MSC INDUSTRIAL DIRECT CO., INC.

CONSOLIDATED BALANCE SHEETS

(In thousands, except share data)

‎

MSC INDUSTRIAL DIRECT CO., INC.

CONSOLIDATED STATEMENTS OF INCOME

(In thousands, except per share data)