MYERS INDUSTRIES INC - Annual Report: 2015 (Form 10-K)

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

FOR THE FISCAL YEAR ENDED December 31, 2015

COMMISSION FILE NUMBER 001-08524

MYERS INDUSTRIES, INC.

(Exact name of registrant as specified in its charter)

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  o    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  o    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to the filing requirements for the past 90 days.    Yes  x    No  o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  o    No  x

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the closing sale price on the New York Stock Exchange as of June 30, 2015: $588,922,537

Indicate the number of shares outstanding of registrant’s common stock as of February 29, 2016: 29,546,342 Shares of Common Stock, without par value.

DOCUMENTS INCORPORATED BY REFERENCE:

Portions of the Registrant’s Definitive Proxy Statement for its 2016 Annual Meeting of Stockholders are incorporated by reference in Part III of this Form 10-K.

TABLE OF CONTENTS

PART I

Myers Industries, Inc. (the “Company”) was founded in Akron, Ohio, in 1933. The terms “Myers Industries,” “Company,” “we,” “us,” or “our” wherever used herein refer to the Company, unless the context indicates to the contrary. Since then, the Company has grown from a small storefront distributing tire service supplies into an international manufacturing and distribution enterprise. In 1971, the Company went public, and the stock is traded on the New York Stock Exchange under the ticker symbol MYE.

Headquartered in Akron, Ohio, the Company manufactures a diverse range of polymer products for industrial, agricultural, automotive, commercial and consumer markets. Myers Industries is a leader in the manufacturing of plastic reusable material handling containers and pallets, and plastic fuel tanks. Other principal product lines include plastic storage and organization containers, rubber tire repair products and custom plastic and rubber products.

The Company is also the largest wholesale distributor of tools, equipment and supplies for the tire, wheel and undervehicle service industry in the United States. The distribution products range from tire balancers and alignment systems to valve caps, tire repair tools and other consumable service supplies.

As of December 31, 2015, the Company operated 15 manufacturing facilities, 19 sales offices, four distribution centers and three distribution branches located throughout North, Central and South America; had approximately 15,500 manufactured products and over 12,500 distributed products; and had approximately 2,360 employees.

Serving customers around the world, products and related services from Myers Industries’ brands provide a wide range of performance benefits to customers in diverse niche markets. Some of these benefits include increasing productivity, driving green initiatives, lowering material handling costs, improving product quality, reducing labor costs, shortening assembly times, eliminating solid waste and increasing profitability.

The Company’s business strategy is focused on sustainable, profitable growth guided by five key operating principles: 1) Customer Dedication, 2) Innovation, 3) Operations Excellence, 4) Organization Development, and 5) Financial Strength. Applying these principles to our business, the Company emphasizes:

The Company continually reviews its segments and brands for strategic fit and growth potential. The review process is dedicated to furthering innovation and brand leadership in our markets, building strong customer relationships and positioning the Company for strong financial performance.

The response to this section of Item 1 is contained in the Industry Segments footnote of the Notes to Consolidated Financial Statements under Item 8 of this report.

1

The Company conducts its business activities in two distinct business segments, Material Handling and Distribution, consistent with the manner in which our Chief Operating Decision Maker evaluates performance and makes resource allocation decisions.

During the second quarter of 2014, the Company's Board of Directors approved the commencement of the sale process to divest its Lawn and Garden business to allow it to focus resources on its core growth platforms. The divestiture of the Lawn and Garden business was completed in February 2015. The Lawn and Garden business served the North American horticulture market with plastic products such as seedling trays, nursery products, hanging baskets, custom print containers as well as decorative resin planters. The operating results for the Lawn and Garden business are classified as discontinued operations in the Consolidated Statements of Operations under Item 8 of this report.

In our Material Handling Segment, we design, manufacture, and market a variety of plastic and metal products. These range from plastic reusable material handling containers and small parts storage bins to plastic RV tanks and parts, marine tanks and parts, portable plastic fuel tanks and water containers, portable marine fuel containers, ammunition containers, storage totes, shipping containers, beverage crates and metal carts and cabinets.

The Distribution Segment is engaged in the distribution of tools, equipment and supplies used for tire, wheel and undervehicle service on passenger, heavy truck and off-road vehicles and the manufacturing of tire repair materials and custom rubber products.

Information regarding the revenues of each segment classified as continuing operations is contained in the Industry Segments footnote of the Notes to Consolidated Financial Statements under Item 8 of this report.

2

The following table summarizes the key attributes of our business segments for the year ended December 31, 2015:

Segments Overview

Material Handling Segment

The Material Handling Segment manufactures highly engineered polymer packaging containers, storage and safety products, and specialty molded parts. The brands within this segment include Buckhorn^®, Akro-Mils^™, Jamco Products, Ameri-Kart^®, Scepter, Myers do Brasil^™ and Novel^®.

Buckhorn’s reusable containers and pallets are used in closed-loop supply chain systems to help customers improve product protection, increase handling efficiencies, reduce freight costs and eliminate solid waste and disposal costs.  Buckhorn offers products to replace costly single use cardboard boxes, wooden pallets, and steel containers. The product line is among the broadest in the industry and includes injection-molded and structural foam-molded constructions.  Buckhorn’s product lines include hand-held containers used for inventory control, order management and transportation of retail goods; collapsible and fixed-wall bulk transport containers for light and heavy-duty tasks; intermediate bulk containers for the storage and transport of food, liquid, powder, and granular products; plastic pallets designed to work with smaller Buckhorn containers; and specialty boxes designed for storage of

3

items such as seed and cheese. Buckhorn also produces a wide variety of specialty products designed for niche applications and custom products designed according to exact customer specifications.

Akro-Mils material handling products provide customers everything they need to store, organize and transport a wide range of goods while increasing overall productivity and profitability.  Serving industrial and commercial markets, Akro-Mils products range from AkroBins^® — the industry’s leading small parts bins — to Super-Size AkroBins, metal panel and bin hanging systems, metal storage cabinet and bin systems, wire shelving systems, plastic and metal transport carts and a wide variety of custom storage and transport products. Akro-Mils products deliver storage and organization solutions in a wide variety of applications, from creating assembly line workstations to organizing medical supplies and retail displays. Emphasis is placed on product bundling and customizing systems to create specific storage and organization configurations for customers’ operations.

Jamco Products is well established in industrial and commercial markets with its wide selection of welded steel service carts, platform trucks, mobile work centers, racks and cabinets for plastic bins, safety flammable cabinets, medical cylinder carts and more. Jamco Products strong product offering, relationships with industrial distributors and reputation for quality and service complements Myers Industries' existing Akro-Mils business.

Ameri-Kart is an industry leading manufacturer and thermoformer of rotational-molded water, fuel and waste handling tanks, plastic trim and interior parts used in the production of seat components, consoles, and other applications throughout the recreational vehicle, marine, and industrial markets.  In addition to standard marine parts, Ameri-Kart is well respected within the marine market for its patented Enviro-Fill^® overfill prevention system (“OPS”) technology and is the industry’s only turnkey provider of an integrated, Environmental Protection Agency (“EPA”)-compliant marine fuel tank and patented Enviro-Fill diurnal system.

Scepter is a leading producer of portable plastic fuel containers, portable marine fuel tanks and water containers, ammunition containers and storage totes.  Scepter was the first provider of Jerry Cans to North America which offer safe, reliable transportation and storage of fuel for the consumer market.  Scepter also manufactures a variety of molded products for military applications from high quality containers to safely store and transport large caliber ammunition, to military specified portable fuel and water canisters and their accessories. Scepter's in-house product engineering and state of the art mold capabilities complements Myers Industries' Material Handling Segment through an increased product offering and global reach.

Myers do Brazil and Novel are leading designers and manufacturers of reusable plastic shipping containers, plastic pallets, crates and totes used for closed-loop shipping and storage in Brazil’s automotive, distribution, food, beverage and agriculture industries. With manufacturing facilities strategically located throughout Brazil, Myers is uniquely positioned to support customers throughout Latin America.  

Distribution Segment

Our Distribution Segment includes the Myers Tire Supply^® and Myers Tire Supply International^™ and Patch Rubber Company^® brands.  Within the Distribution Segment we source and manufacturer top of the line products for the tire, wheel and undervehicle service industry.

Myers Tire Supply is the largest U.S. distributor and single source for tire, wheel and undervehicle service tools, equipment and supplies. We buy and sell approximately 12,500 different items — everything that professionals need to service passenger, truck and off-road tires, wheels and related components. Independent tire dealers, mass merchandisers, commercial auto and truck fleets, auto dealerships, tire retreaders and general repair facilities rely on our broad product selection, rapid availability and personal service to be more productive and profitably grow their business.

While the needs and composition of our distribution markets constantly change, we adapt and deliver the new products and services that are crucial to our customers’ success. The new product pipeline is driven by a thorough understanding of the market and its customers' needs. Myers Tire Supply in turn works closely with its suppliers to develop innovative products and services to meet these needs.

Patch Rubber Company manufactures one of the most comprehensive lines of tire repair and retreading products in the United States. Service professionals rely on our extensive product selection and quality for safe, cost-effective repairs to passenger, truck and off-road tires. Products include the plug that fills a puncture, the cement that seals the plug, the tire innerliner patch and the final sealing compound. Patch brand repair products maintain a strong position in the tire service markets including sales through our Distribution Segment’s sales network.  Patch Rubber also employs its rubber calendering and compounding expertise to create a diverse portfolio of products outside of the tire repair market, such as reflective highway marking tapes. Our rubber-based tape and symbols provide the durability and brightness that construction professionals demand to replace paint for marking road repair, intersections and hazardous areas. Compared with traditional highway paint, the tape stock is easier to apply, more reflective and longer lasting.

4

Raw Materials & Suppliers — Manufacturing and Distribution Segments

The Company purchases substantially all of its raw materials from a wide range of third-party suppliers. These materials are primarily polyethylene, polypropylene, and polystyrene plastic resins, as well as synthetic and natural rubber. Most raw materials are commodity products and available from several domestic suppliers. We believe that the loss of any one supplier or group of suppliers would not have a material adverse effect on our business.

Our Distribution Segment purchases substantially all of its components from third-party suppliers and has multiple sources for its products.

Competition

Competition in our Material Handling Segment is substantial and varied in form and size from manufacturers of similar products and of other products which can be substituted for those produced by the Company. In general, most direct competitors with the Company’s brands are private entities. Myers Industries maintains strong brand presence and market positions in the niche sectors of the markets it serves. The Company does not command substantial, overall market presence in the broad market sectors.

Competition in our Distribution Segment is generally comprised of small companies, regional players and national auto parts chains where product offerings may overlap. Within the overall tire, wheel and undervehicle service market, Myers Industries is the largest U.S. distributor of tools, equipment and supplies offered based on national coverage.

Customer Dependence

In 2015, 2014 and 2013, there were no customers that accounted for more than five percent of total net sales. Myers Industries serves thousands of customers who demand value through product selection, innovation, quality, delivery and responsive personal service. Our brands foster satisfied, loyal customers who have recognized our performance through numerous supplier quality awards.

Employees

As of December 31, 2015, Myers Industries had a total of approximately 2,360 full-time and part-time employees. Of these, approximately 1,800 were employed in the Company’s Material Handling Segment and the Distribution Segment employed approximately 500. The Company’s corporate offices had approximately 60 employees.

As of December 31, 2015, the Company had approximately 500 employees represented by labor unions. Collective bargaining agreements between us and these labor unions expire March 2016, June 2016 and November 2016, representing approximately 100, 200 and 200 employees, respectively. We consider our relationship with our employees generally to be satisfactory.

Backlog

The backlog of orders for our operations is estimated to have been approximately $44 million at December 31, 2015 and approximately $41 million at December 31, 2014. Our backlog is scheduled for delivery within the succeeding 12 months. During periods of shorter lead times, backlog may not be a meaningful indicator of future sales. Accordingly, we do not believe our backlog data and comparisons thereof, as of different dates, reliably indicate future sales or shipments.

The response to this section of Item 1 is contained in the Industry Segments footnote of the Notes to Consolidated Financial Statements under Item 8 of this report.

Filings with the SEC.    As a public company, we regularly file reports and proxy statements with the Securities and Exchange Commission ("SEC"), such as:

* annual reports on Form 10-K;

* quarterly reports on Form 10-Q;

* current reports on Form 8-K; and

* proxy statements on Schedule 14A.

5

Anyone may read and copy any of the materials we file with the SEC at its Public Reference Room at 100 F Street, N.E., Washington, DC 20549. Information regarding operations of the Public Reference Room may also be obtained by calling the SEC at 1-800-SEC-0330. The SEC also maintains an internet website that contains our reports, proxy and information statements, and our other SEC filings; the address of that site is http://www.sec.gov.

Also, we make our SEC filings available free of charge on our own internet site as soon as reasonably practicable after we have filed with the SEC. Our internet address is http://www.myersindustries.com. The content on the Company’s website is available for informational purposes only and is not incorporated by reference into this Form 10-K.

Corporate Governance.     We have a Code of Business Conduct for our employees and members of our Board of Directors. A copy of this Code is posted on our website in the section titled “Investor Relations”. We will satisfy any disclosure requirement under Item 5.05 of Form 8-K regarding an amendment to, or waiver from, any provision of this Code with respect to our executive officers or directors by disclosing the nature of that amendment or waiver.

Our website also contains additional information about our corporate governance policies, including the charters of our standing board committees. Any of these items are available in print to any shareholder who requests them. Requests should be sent to Corporate Secretary, Myers Industries, Inc., 1293 S. Main Street, Akron, Ohio 44301.

6

This Form 10-K and the information we are incorporating by reference contain forward-looking statements within the meaning of federal securities laws, including information regarding the Company’s financial outlook, future plans, objectives, business prospects and anticipated financial performance. You can identify these statements by the fact that they include words such as “will,” “believe,” “anticipate,” “expect,” “estimate,” “intend,” “plan,” or variations of these words, or similar expressions. These forward-looking statements are not statements of historical facts and represent only our current expectations regarding such matters. These statements inherently involve a wide range of known and unknown uncertainties. The Company’s actual actions and results could differ materially from what is expressed or implied by these statements. Specific factors that could cause such a difference include those set forth below and other important factors disclosed previously and from time to time in our other filings with the Securities and Exchange Commission. Given these factors, as well as other variables that may affect our operating results, you should not rely on forward-looking statements, assume that past financial performance will be a reliable indicator of future performance, nor use historical trends to anticipate results or trends in future periods. We expressly disclaim any obligation or intention to provide updates to the forward-looking statements and the estimates and assumptions associated with them.

Risks and uncertainties that could cause actual results to differ materially from those expressed or implied in the applicable statements include:

Any significant increase in the cost of raw materials or disruption in the availability of raw materials could adversely affect our performance.

Our ability to manage our cost structure can be adversely affected by movements in commodity and other raw material prices. Our primary raw materials include plastic resins, colorants and natural and synthetic rubbers. Plastic resins in particular are subject to substantial short term price fluctuations, including those arising from supply shortages and changes in the price of natural gas, crude oil and other petrochemical intermediates from which resins are produced, as well as other factors. Over the past several years, we have at times experienced rapidly increasing resin prices. The Company’s revenue and profitability may be materially and adversely affected by these price fluctuations.

Market conditions may limit our ability to raise selling prices to offset increases in our raw material input costs. If we are unsuccessful in developing ways to mitigate raw material cost increases, we may not be able to improve productivity or realize our ongoing cost reduction programs sufficiently to help offset the impact of these increased raw material costs. As a result, higher raw material costs could result in declining margins and operating results.

Changes in raw material availability may also occur due to events beyond our control, including natural disasters such as floods, tornadoes and hurricanes. Our specific molding technologies and/or product specifications can limit our ability to locate alternative suppliers to produce certain products.

We may incur inherent risks associated with our strategic growth initiatives.

Our growth initiatives include internal growth driven by strong brands and new product innovation; development of new, high-growth markets and expansion in existing niche markets; strengthened customer relationships through value-added initiatives and key product partnerships; investments in new technology and processes to reinforce market strength and capabilities in key business groups; consolidation and rationalization activities to further reduce costs and improve productivity within our manufacturing and distribution footprint; an opportunistic and disciplined approach to strategic, bolt-on acquisitions to accelerate growth in our market positions; and potential divestitures of businesses with non-strategic products or markets.

While this is a continuous process, all of these activities and initiatives have inherent risks and there remain significant challenges and uncertainties, including economic and general business conditions that could limit our ability to achieve anticipated benefits associated with announced strategic initiatives and affect our financial results. We may not achieve any or all of these goals and are unable to predict whether these initiatives will produce significant revenues or profits.

7

We may not realize the improved operating results that we anticipate from past and recent acquisitions or from acquisitions we may make in the future and we may experience difficulties in integrating the acquired businesses or may inherit significant liabilities related to such businesses.

We explore opportunities to acquire businesses that we believe are related to our core competencies from time to time, some of which may be material to us. We expect such acquisitions will produce operating results consistent with our other operations; however, we may be unable to achieve the benefits expected to be realized from our acquisitions. In addition, we may incur additional costs and our management’s attention may be diverted because of unforeseen expenses, difficulties, complications, delays and other risks inherent in acquiring businesses, including the following:

Our results of operations and financial condition could be adversely affected by a downturn in the general markets or the general economic environment.

We operate in a wide range of geographies, primarily North America, Central America and South America. Worldwide and regional economic, business and political conditions, including changes in the economic conditions of the broader markets and in our individual niche markets, could have an adverse effect on one or both of our operating segments.

We operate in a very competitive business environment.

Both of our segments participate in markets that are highly competitive. We compete primarily on the basis of product quality, product performance, value, and supply chain competency. Our competitive success also depends on our ability to maintain strong brands, customer relationships and the belief that customers will need our products and services to meet their growth requirements. The development and maintenance of such brands requires continuous investment in brand building, marketing initiatives and advertising. The competition that we face in all of our markets — which varies depending on the particular business segment, product lines and customers — may prevent us from achieving sales, product pricing and income goals, which could affect our financial condition and results of operations.

Our operations depend on our ability to maintain continuous, uninterrupted production at our manufacturing facilities, which are subject to physical and other risks that could disrupt production.

We are subject to inherent risks in our diverse manufacturing and distribution activities, including, but not limited to: product quality, safety, licensing requirements and other regulatory issues, environmental events, loss or impairment of key manufacturing or distribution sites, disruptions in logistics and transportation services, labor disputes and industrial accidents. While we maintain insurance covering our manufacturing and production facilities, including business interruption insurance, a catastrophic loss of the use of all or a portion of our facilities due to accident, fire, explosion, or natural disaster, whether short or long-term, could have a material adverse effect on our business, financial condition and results of operations.

Unexpected failures of our equipment and machinery may also result in production delays, revenue loss and significant repair costs, as well as injuries to our employees. Any interruption in production capability may require us to make large capital expenditures to remedy the situation, which could have a negative impact on our profitability and cash flows. Our business interruption insurance may not be sufficient to offset the lost revenues or increased costs that we may experience during a disruption of our operations. A temporary or long-term business disruption could result in a permanent loss of customers. If this were to occur, our future sales levels, and therefore our profitability, could be materially adversely affected.

8

We derive a portion of our revenues from direct and indirect sales outside the United States and are subject to the risks of doing business in foreign countries.

We currently operate manufacturing, sales and service facilities outside of the United States, particularly in Canada and Brazil. For the year ended December 31, 2015, international net sales accounted for approximately 17% of our total net sales from continuing operations. Accordingly, we are subject to risks associated with operations in foreign countries, including:

In addition, our operations outside the United States are subject to the risk of new and different legal and regulatory requirements in local jurisdictions, potential difficulties in staffing and managing local operations and potentially adverse tax consequences. The costs related to our international operations could adversely affect our operations and financial results in the future.

Our future performance depends in part on our ability to develop and market new products if there are changes in technology, regulatory requirements or competitive processes.

Changes in technology, regulatory requirements and competitive processes may render certain products obsolete or less attractive. Our performance in the future will depend in part on our ability to develop and market new products that will gain customer acceptance and loyalty, as well as our ability to adapt our product offerings and control our costs to meet changing market conditions. Our operating performance would be adversely affected if we were to incur delays in developing new products or if such products did not gain market acceptance. There can be no assurance that existing or future products will be sufficiently successful to enable us to effectively compete in our markets or, should new product offerings meet with significant customer acceptance, that one or more current or future competitors will not introduce products that render our products noncompetitive.

We may not be successful in protecting our intellectual property rights, including our unpatented proprietary know-how and trade secrets, or in avoiding claims that we infringed on the intellectual property rights of others.

In addition to relying on patent and trademark rights, we rely on unpatented proprietary know-how and trade secrets and employ various methods, including confidentiality agreements with employees and consultants, to protect our know-how and trade secrets. However, these methods and our patents and trademarks may not afford complete protection and there can be no assurance that others will not independently develop the know-how and trade secrets or develop better production methods than us. Further, we may not be able to deter current and former employees, contractors and other parties from breaching confidentiality agreements and misappropriating proprietary information and it is possible that third parties may copy or otherwise obtain and use our information and proprietary technology without authorization or otherwise infringe on our intellectual property rights. Additionally, in the future we may license patents, trademarks, trade secrets and similar proprietary rights to third parties. While we attempt to ensure that our intellectual property and similar proprietary rights are protected when entering into business relationships, third parties may take actions that could materially and adversely affect our rights or the value of our intellectual property, similar proprietary rights or reputation. In the future, we may also rely on litigation to enforce our intellectual property rights and contractual rights and, if not successful, we may not be able to protect the value of our intellectual property. Furthermore, no assurance can be given that we will not be subject to claims asserting the infringement of the intellectual property rights of third parties seeking damages, the payment of royalties or licensing fees and/or injunctions against the sale of our products. Any litigation could be protracted and costly and could have a material adverse effect on our business and results of operations regardless of its outcome.

If we are unable to maintain access to credit financing, our business may be adversely affected.

The Company’s ability to make payments and to refinance our indebtedness, fund planned capital expenditures and acquisitions and pay dividends will depend on our ability to generate cash in the future and retain access to credit financing. This, to some extent, is subject to general economic, financial, competitive, legislative, regulatory and other factors that are beyond our control.

We cannot provide assurance that our business will generate sufficient cash flow from operating activities or that future borrowings will be available to us under our credit facilities in amounts sufficient to enable us to service debt, make necessary capital expenditures or fund other liquidity needs. We may need to refinance all or a portion of our indebtedness, on or before maturity. We cannot be sure that we would be able to refinance any of our indebtedness on commercially reasonable terms or at all.

9

The credit facilities contain restrictive covenants and cross default provisions that require us to maintain specified financial ratios. The Company’s ability to satisfy those financial ratios can be affected by events beyond our control, and we cannot be assured we will satisfy those ratios. A breach of any of those financial ratio covenants or other covenants could result in a default. Upon the occurrence of an event of default, the lenders could elect to declare the applicable outstanding indebtedness due immediately and payable and terminate all commitments to extend further credit. We cannot be sure that our lenders would waive a default or that we could pay the indebtedness in full if it were accelerated.

If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results. As a result, current and potential shareholders could lose confidence in our financial reporting, which would harm our business and the trading price of our common stock.

Internal control systems are intended to provide reasonable assurance regarding the preparation and fair presentation of published financial statements. Any failure to maintain effective controls or implement required new or improved controls could cause us to fail to meet our periodic reporting obligations or result in material misstatements in our Consolidated Financial Statements, and substantial costs and resources may be required to rectify these internal control deficiencies. If we have an internal control deficiency and our remedial measures are insufficient, material weaknesses or significant deficiencies in our internal control over financial reporting could be discovered or occur in the future, and our consolidated financial statements may contain material misstatements. See Item 9A – Controls and Procedures for further discussion.

Future claims, litigation and regulatory actions could adversely affect our financial condition and our ability to conduct our business.

While we strive to ensure that our products comply with applicable government regulatory standards and internal requirements and that our products perform effectively and safely, customers from time to time could claim that our products do not meet contractual requirements, and users could be harmed by use or misuse of our products. This could give rise to breach of contract, warranty or recall claims, or claims for negligence, product liability, strict liability, personal injury or property damage. Product liability insurance coverage may not be available or adequate in all circumstances. In addition, claims may arise related to patent infringement, environmental liabilities, distributor terminations, commercial contracts, antitrust or competition law, employment law and employee benefits issues and other regulatory matters. While we have in place processes and policies to mitigate these risks and to investigate and address such claims as they arise, we cannot predict the underlying costs to defend or resolve such claims.

Current and future environmental and other governmental laws and requirements could adversely affect our financial condition and our ability to conduct our business.

Our operations are subject to federal, state, local and foreign environmental laws and regulations that impose limitations on the discharge of pollutants into the air and water and establish standards for the handling, use, treatment, storage and disposal of, or exposure to, hazardous wastes and other materials and require clean up of contaminated sites. Some of these laws and regulations require us to obtain permits, which contain terms and conditions that impose limitations on our ability to emit and discharge hazardous materials into the environment and periodically may be subject to modification, renewal and revocation by issuing authorities. Fines, penalties and other civil or criminal sanctions may be imposed for non-compliance with applicable environmental laws and regulations and the failure to have or to comply with the terms and conditions of required permits. Certain environmental laws in the United States, such as the federal Superfund law and similar state laws, impose liability for the cost of investigation or remediation of contaminated sites upon the current or, in some cases, the former site owners or operators (or their predecessor entities) and upon parties who arranged for the disposal of wastes or transported or sent those wastes to an off-site facility for treatment or disposal, regardless of when the release of hazardous substances occurred or the lawfulness of the activities giving rise to the release. Such liability can be imposed without regard to fault and, under certain circumstances, can be joint and several, resulting in one party being held responsible for the entire obligation.

While we have not been required historically to make significant capital expenditures in order to comply with applicable environmental laws and regulations, we cannot predict with any certainty our future capital expenditure requirements because of continually changing compliance standards and environmental technology. Furthermore, violations or contaminated sites that we do not know about, including contamination caused by prior owners and operators of such sites, or at sites formerly owned or operated by us or our predecessors in connection with discontinued operations, could result in additional compliance or remediation costs or other liabilities, which could be material.

In that we have been formally notified by the U.S. Environmental Protection Agency (“EPA”) that we are considered to be a potentially responsible party (“PRP”) of the New Idria Mercury Mine, the Company accrued costs related to the EPA claim. As negotiations with the EPA proceed with respect to the Remedial Investigation/Feasibility Study, it is possible that adjustments to the reserved expense will be necessary to reflect new information. Estimates of our liability are based on current facts, laws, regulations and technology. Estimates of our environmental liabilities are further subject to uncertainties regarding the negotiations with EPA, the nature and extent of site contamination, the range of remediation alternatives available, evolving remediation standards, imprecise

10

engineering evaluation and cost estimates, the extent of remedial actions that may be required, the number and financial condition of other PRPs that may be named as well as the extent of their responsibility for the remediation, and the availability of insurance coverage for these expenses. At this time, we have not accrued for remediation costs in connection with this site as we are unable to estimate the liability, given the circumstances referred to above, including the fact the final remediation strategy has not yet been determined.

We have limited insurance coverage for potential environmental liabilities associated with historic and current operations and we do not anticipate increasing such coverage in the future. We may also assume significant environmental liabilities in acquisitions. Such costs or liabilities could adversely affect our financial situation and our ability to conduct our business.

Environmental regulations specific to plastic products and containers could adversely affect our ability to conduct our business.

Federal, state, local and foreign governments could enact laws or regulations concerning environmental matters that increase the cost of producing, or otherwise adversely affect the demand for, plastic products. Legislation that would prohibit, tax or restrict the sale or use of certain types of plastic and other containers, and would require diversion of solid wastes such as packaging materials from disposal in landfills, has been or may be introduced in the U.S. Congress, in state legislatures and other legislative bodies. While container legislation has been adopted in a few jurisdictions, similar legislation has been defeated in public referenda in several states, local elections and many state and local legislative sessions. There can be no assurance that future legislation or regulation would not have a material adverse effect on us. Furthermore, a decline in consumer preference for plastic products due to environmental considerations could have a negative effect on our business.

Our insurance coverage may be inadequate to protect against potential hazardous incidents to our business.

We maintain property, business interruption, product liability and casualty insurance coverage, but such insurance may not provide adequate coverage against potential claims, including losses resulting from war risks, terrorist acts or product liability claims relating to products we manufacture. Consistent with market conditions in the insurance industry, premiums and deductibles for some of our insurance policies have been increasing and may continue to increase in the future. In some instances, some types of insurance may become available only for reduced amounts of coverage, if at all. In addition, there can be no assurance that our insurers would not challenge coverage for certain claims. If we were to incur a significant liability for which we were not fully insured or that our insurers disputed, it could have a material adverse effect on our financial position, results of operations or cash flows.

Our business operations could be significantly disrupted if members of our senior management team were to leave.

Our success depends to a significant degree upon the continued contributions of our senior management team. Our senior management team has extensive marketing, sales, manufacturing, finance and engineering experience, and we believe that the depth of our management team is instrumental to our continued success. The loss of any of our key executive officers in the future could significantly impede our ability to successfully implement our business strategy, financial plans, expansion of services, marketing and other objectives.

We may be subject to risks relating to our information technology systems.

We rely on information technology systems to process, transmit and store electronic information and manage and operate our business. A breach in security could expose us and our customers and suppliers to risks of misuse of confidential information, manipulation and destruction of data, production downtimes and operations disruptions, which in turn could negatively affect our reputation, competitive position, business, results of operations or cash flows.

An impairment of goodwill would negatively impact our financial results.

At least annually, we perform an impairment test for goodwill. Under current accounting guidance, if the carrying value of goodwill exceeds the estimated fair value, impairment is deemed to have occurred and the carrying value of goodwill is written down to fair value with a charge against earnings. Accordingly, any determination requiring the write-off of a significant portion of goodwill could negatively impact our results of operations. See Critical Accounting Policies within Management’s Discussion and Analysis of Results of Operations and Financial Condition for further discussion of at-risk reporting units.

Unforeseen future events may negatively impact our economic condition.

Future events may occur that would adversely affect the reported value of our assets. Such events may include, but are not limited to, strategic decisions made in response to changes in economic and competitive conditions, the impact of the economic environment on our customer base, or a material adverse change in our relationship with significant customers.

11

Equity Ownership Concentration

Based solely on the Schedule 13D filed on February 19, 2016, by Gabelli Funds, LLC, GAMCO Asset Management Inc., MJG Associates, Inc., Gabelli Securities, Inc., Teton Advisors, Inc., Gabelli Foundation, Inc., GGCP, Inc., and GAMCO Investors, Inc., (collectively, the “Gamco Group”), for which the Company disclaims any responsibility, beneficially owned 6,934,888 shares of our common stock which represented approximately 23% of the 30,140,159 shares outstanding as reported in our Form 10-Q for the quarterly period ended September 30, 2015. Combined, these parties may have sufficient voting power to influence actions requiring the approval of our shareholders.

Legal & Regulatory Actions

Changes in laws and regulations and approvals and decisions of courts, regulators, and governmental bodies on any legal claims known or unknown, could have an adverse effect on the Company’s financial results.

None.

12

The following table sets forth certain information with respect to properties owned by the Company:

The following table sets forth certain information with respect to facilities leased by the Company:

The Company also leases facilities for its sales offices and sales branches in the United States and Central America which, in the aggregate, amount to approximately 50,000 square feet of warehouse and office space. All of these locations are used by the Distribution Segment.

The Company believes that all of its properties, machinery and equipment generally are well maintained and adequate for the purposes for which they are used.

13

The Company is a defendant in various lawsuits and a party to various other legal proceedings, in the ordinary course of business, some of which are covered in whole or in part by insurance. We believe that the outcome of these lawsuits and other proceedings will not individually or in the aggregate have a future material adverse effect on our consolidated financial position, results of operations or cash flows.

New Idria Mercury Mine

Effective October 2011, the U.S. Environmental Protection Agency (“EPA”) added the New Idria Mercury Mine site located near Hollister, California to the Superfund National Priorities List because of alleged contaminants discharged to California waterways. The New Idria Quicksilver Mining Company, founded in 1936, and later renamed the New Idria Mining & Chemical Company ("NIMCC") owned and/or operated the New Idria Mine through 1976. In 1981 NIMCC, after another name change, was merged into Buckhorn Metal Products Inc. which was subsequently acquired by Myers Industries in 1987. The EPA contends that past mining operations have resulted in mercury contamination and acid mine drainage at the mine site, in the San Carlos Creek, Silver Creek and a portion of Panoche Creek, and that other downstream locations may also be impacted.

In September 2015, a subsidiary of the Company, Buckhorn, Inc. (“Buckhorn”) received a notice letter and related documents from EPA (the “Notice Letter”) formally informing Buckhorn that it considers it to be a potentially responsible party (“PRP”) in connection with the New Idria Mercury Mine site. As a result of this Notice Letter, Buckhorn and the Company expect to engage in negotiations with EPA with respect to a draft Administrative Order proposed by EPA for the Remedial Investigation/Feasibility Study (“RI/FS”) for the site to determine the extent of remediation necessary and the screening of alternatives. The Company recognized an expense of $1.9 million, on an undiscounted basis, in 2011 related to performing a RI/FS. As part of the Notice Letter, EPA also made a claim for approximately $1.6 million in past costs for actions it claims it has taken in connection with the New Idria Mercury Mine site since 1993. These costs include approximately $0.5 million for an interim removal project at the New Idria Mercury Mine site completed by the EPA in November 2011. It is expected this removal action will be part of the final remediation strategy for the site. The Company currently expects to challenge EPA's past cost claims. The Company reserved an additional $1.3 million in 2015 related to the EPA claim, reflected as an increase in general and administrative expenses in the Consolidated Statements of Operations. Total payments of approximately $1.2 million have been made and charged against the reserve classified in Other Liabilities on the Consolidated Statements of Financial Position, which brings the total accrued balance related to this matter to $2.0 million at December 31, 2015. As negotiations with the EPA proceed with respect to the RI/FS, it is possible that adjustments to the aforementioned reserves will be necessary to reflect new information. Estimates of the Company’s liability are based on current facts, laws, regulations and technology. Estimates of the Company’s environmental liabilities are further subject to uncertainties regarding the negotiations with EPA, the nature and extent of site contamination, the range of remediation alternatives available, evolving remediation standards, imprecise engineering evaluation and cost estimates, the extent of remedial actions that may be required, the number and financial condition of other PRPs that may be named as well as the extent of their responsibility for the remediation, and the availability of insurance coverage for these expenses. At this time, we have not accrued for remediation costs in connection with this site as we are unable to estimate the liability, given the circumstances referred to above, including the fact the final remediation strategy has not yet been determined.

Other

Buckhorn and Schoeller Arca Systems, Inc. (“SAS”) were plaintiffs in a patent infringement lawsuit against Orbis Corp. and Orbis Material Handling, Inc. (“Orbis”) for alleged breach by Orbis of an exclusive patent license agreement from SAS to Buckhorn. SAS is an affiliate of Schoeller Arca Systems Services B.V. (“SASS B.V.”), a Dutch company. SAS manufactures and sells plastic returnable packaging systems for material handling. In the course of the litigation, it was discovered that SAS had given a patent license agreement to a predecessor of Orbis that pre-dated the one that SAS sold to Buckhorn. As a result, judgment was entered in favor of Orbis, and the court awarded attorney fees and costs to Orbis in the amount of $3.1 million, plus interest and costs.

In May 2014, Orbis made demand to SAS that SAS pay the judgment in full, and subsequently in July 2014, Orbis made the same demand to Buckhorn. Buckhorn believed it was not responsible for any of the judgment because it was not a party to the Orbis license. Despite this belief, the Company recorded expense of $3.0 million during the third quarter of 2014 for the entire amount of the unpaid judgement. The United States Court of Appeals for the Federal Circuit reversed the judgment against Buckhorn on July 2, 2015, and found that Buckhorn was not liable to Orbis for any portion of the judgment entered in favor of Orbis. Accordingly, Myers reversed the accrual of $3.0 million during 2015, which was reflected as a reduction of general and administrative expenses. The Federal Circuit Court of Appeals rejected Orbis' petition for rehearing and rehearing en banc. All opportunities for Orbis to appeal have expired. The United States District Court for the Southern District of Ohio has now released Buckhorn’s appellate bond. Buckhorn is also pursuing legal action against SAS and SASS B.V. for fraudulently selling an exclusive patent license they could not sell and related claims. That case is now pending in United States District Court for the Southern District of New York. In August 2014, SASS B.V. informed Buckhorn that SAS may not have the financial ability to pay any judgment against it and provided financial statements

14

to Buckhorn indicating SAS was in financial distress while SASS B.V. was financially stable. Given the uncertainty of SAS’s financial status, it is not known at this time what the likelihood of recovering from SAS (or SASS B.V.) would be in the event that there is a favorable outcome for Buckhorn in the New York court. 

When management believes that a loss arising from these matters is probable and can reasonably be estimated, we record the amount of the estimated loss, or the minimum estimated liability when the loss is estimated using a range, and no point within the range is more probable of occurrence than another. As additional information becomes available, any potential liability related to these matters will be assessed and the estimates will be revised, if necessary.

Based on current available information, management believes that the ultimate outcome of these matters will not have a material adverse effect on our financial position, cash flows or overall trends in our results of operations. However, these matters are subject to inherent uncertainties, and unfavorable rulings could occur. If an unfavorable ruling were to occur, there exists the possibility of a material adverse impact on the financial position and results of operations of the period in which the ruling occurs, or in future periods.

EXECUTIVE OFFICERS OF THE REGISTRANT

Set forth below is certain information concerning the executive officers of the Registrant as of December 31, 2015. Executive officers are appointed annually by the Board of Directors.

Mr. Banyard, President and Chief Executive Officer, was appointed to his current position on December 7, 2015. Formerly, Mr. Banyard served as the Group President, Fluid Handling Technologies at Roper Technologies where he led a diverse portfolio of companies serving a wide array of end markets. Prior to that, Mr. Banyard was with Danaher Corporation where he held successive leadership roles during his six year tenure culminating with his leadership of the Vehicle Systems business unit of Kollmorgen, based in Stockholm, Sweden.

Mr. Branning, Senior Vice President, Chief Financial Officer and Corporate Secretary, was appointed to his current position on September 1, 2012. Prior to that he was with Danaher Corporation, where he served as Vice President of Finance and Chief Financial Officer of Thomson Industries, a Danaher subsidiary. Mr. Branning joined Danaher Corporation in 2003 where he served in various leadership positions in various subsidiaries of Danaher.

Section 16(a) of the Securities Exchange Act of 1934 requires the Registrant’s Directors, certain of its executive officers and persons who own more than ten percent of its Common Stock (“Insiders”) to file reports of ownership and changes in ownership with the Securities and Exchange Commission and the New York Stock Exchange, and to furnish the Company with copies of all such forms they file. The Company understands from the information provided to it by insiders that they adhered to all filing requirements applicable to Section 16 filers in 2015.

15

PART II

The Company’s Common Stock is traded on the New York Stock Exchange (ticker symbol MYE). The approximate number of shareholders of record at December 31, 2015 was 1,181. High and low stock prices and dividends for the last two years were:

Purchases of equity securities by the issuer

The following table presents information regarding the Company’s stock purchase plan during the three months ended December 31, 2015.

16

See Item 12 of this Form 10-K for the Equity Compensation Plan Information Table which is incorporated herein by reference.

Comparison of 5 Year Cumulative Total Return

Assumes Initial Investment of $100

December 31, 2015

17

Thousands of Dollars, Except Per Share Data

18

Executive Overview

The Company conducts its business activities in two distinct segments: The Material Handling Segment and the Distribution Segment. The Lawn and Garden business, which was sold in February 2015, is classified as discontinued operations in all periods presented.

On July 2, 2014, CA Acquisition Inc., now known as Scepter Canada Inc., and a wholly-owned subsidiary of Myers Industries, Inc., completed the purchase of substantially all of the assets and assumption of certain liabilities of Scepter Corporation and certain real property of SHI Properties Inc., both located in Scarborough, Ontario, Canada. Contemporaneously with the asset acquisition, Crown US Acquisition Company, now known as Scepter US Holding Company, and another wholly-owned subsidiary of Myers Industries, Inc., completed the purchase of all of the issued and outstanding membership interests of Eco One Leasing, LLC and Scepter Manufacturing, LLC, both located in Miami, Oklahoma. Eco One Leasing, LLC was subsequently merged into Scepter Manufacturing, LLC. The total purchase price for these acquisitions (collectively, “Scepter”) was $156.6 million in cash, which includes a final working capital adjustment. The acquisition of Scepter was funded from net proceeds from additional borrowings of approximately $134.1 million under the Fourth Amended and Restated Loan Agreement and cash on hand of $22.5 million. The operating results of Scepter have been included within our Consolidated Statements of Operations and within the Company's Material Handling Segment since the date of acquisition.

The Company designs, manufactures, and markets a variety of plastic and rubber products. Our Material Handling Segment manufactures products that range from plastic reusable material handling containers and small parts storage bins to plastic OEM parts, custom plastic products, consumer fuel containers, military water containers as well as ammunition packaging and shipping containers. Our Distribution Segment is engaged in the distribution of tools, equipment and supplies used for tire, wheel and under vehicle service on passenger, heavy truck and off-road vehicles, as well as the manufacturing of tire repair and retreading products.

Results of Operations: 2015 versus 2014

Net Sales:

Net sales for the year ended December 31, 2015 were $601.5 million, a decrease of $22.1 million or 4% compared to the prior year. Net sales increased $52.8 million due to the inclusion of Scepter which was acquired on July 2, 2014. Excluding Scepter, net sales were negatively impacted by lower sales volumes of approximately $51.2 million, primarily in our Material Handling Segment, the effect of unfavorable foreign currency translation of $18.4 million and lower pricing of $5.3 million.

Net sales in the Material Handling Segment decreased $18.1 million or 4% for the year ended December 31, 2015 compared to the prior year. Net sales increased $52.8 million due to the addition of Scepter, which was acquired in the third quarter of 2014. Excluding net sales related to Scepter, 2015 sales volumes for the segment were unfavorable by $47.6 million versus 2014, mainly due to the overall weakness in the agricultural end market. Net sales for the year ended December 31, 2015 were also impacted by unfavorable foreign currency translation of $18.4 million and lower pricing of $4.8 million.

Net sales in the Distribution Segment decreased $4.3 million or 2% in the year ended December 31, 2015 compared to the prior year. The decrease in net sales was primarily the result of lower current year sales in Canada due to the closure of Canadian branches late in the first quarter of 2014, combined with weakened demand in certain geographical markets which is partially attributable to the stronger U.S. dollar.

Cost of Sales & Gross Profit:

19

Gross profit margin increased to 29.6% in the year ended December 31, 2015 compared to 25.9% in the prior year primarily due to the acquisition of Scepter in July 2014 and lower input costs primarily for plastic resins, partially offset by lower volume primarily in our Material Handling Segment and negative mix of products sold across both of our reportable segments. Gross margin in 2014 was negatively impacted by a $2.3 million inventory fair value adjustment resulting from our acquisition of Scepter.

Selling, General and Administrative Expenses:

Selling, general and administrative (“SG&A”) expenses for the year ended December 31, 2015 were $147.4 million, an increase of $8.7 million or 6% compared to the prior year. An increase in SG&A of $11.4 million was due to the inclusion of Scepter expenses during the first six months of 2015. Excluding the impact of Scepter, SG&A expenses were favorable by $6.0 million versus the prior year due to the reversal of the prior year legal accrual related to the Orbis litigation as described in Note 9, $3.6 million of transaction costs in the year ended December 31, 2014 related to the acquisition of Scepter and $3.5 million from foreign currency translation. These reductions were partially offset by an increase in legal and professional costs of $1.6 million associated with the Brazilian investigation that was completed in the first quarter of 2015, $1.8 million of incremental stock compensation expenses, a $1.3 million charge for environmental reserves described in Note 9, $1.0 million of additional long-term compensation expenses for retirement eligible employees and an increase in other employee-related costs.

Net Interest Expense:

Net interest expense for the year ended December 31, 2015 was $9.0 million compared to $8.5 million during 2014. The increase in net interest expense is due to an increase in average borrowings and average borrowing rate during the year ended December 31, 2015 compared to the prior year, partially offset by interest income on the note receivable from the sale of the Lawn and Garden business described in Note 4.

Income Taxes:

The effective tax rate was 35.7% for the year ended December 31, 2015 compared to 36.4% in the prior year. The 2015 effective rate reflects benefits from foreign tax rate differentials and lower non-deductible expenses, partially offset by higher 2015 state income taxes compared to prior year.

20

Discontinued Operations:

Net sales from discontinued operations decreased $175.4 million for the year ended December 31, 2015 compared to the year ended December 31, 2014. The decrease was mainly due to the sale of the Lawn and Garden business on February 17, 2015. Discontinued operations are comprised of the Lawn and Garden business and WEK Industries, Inc. (“WEK”). We completed the sale of WEK in June 2014. 

Income from discontinued operations, net of income taxes was $3.7 million for the year ended December 31, 2015 compared to a loss, net of income taxes of $17.6 million in the prior year. The increase in 2015 as compared to the prior year was primarily driven by restructuring and other related charges incurred by the Lawn and Garden business during the year ended December 31, 2014 and an asset impairment charge of $18.9 million recorded in 2014 to reflect the excess carrying value over fair value less cost to sell the Lawn and Garden business. A disagreement between the parties over the calculation of the final working capital adjustment was resolved by arbitration on March 9, 2016. As a result of the final ruling, the Company recorded an additional gain of $0.6 million, net of tax, in 2015. The final working capital adjustment will result in a cash payment to the buyer of approximately $4.0 million in 2016. The total gain on the sale of the Lawn and Garden business was $4.7 million, net of tax, during 2015 and is included in income (loss) from discontinued operations in the accompanying Consolidated Statements of Operations.

Results of Operations: 2014 versus 2013

Net Sales:

Net sales for 2014 were $623.6 million, an increase of $38.9 million or 7% compared to the prior year. Net sales increased $39.4 million due to the inclusion of Scepter Corporation Group ("Scepter") acquired July 2, 2014. The increase in net sales also included $12.7 million of improved pricing to mitigate higher resin prices during the year. The increase in net sales was partially offset by lower sales volumes of $6.8 million and unfavorable foreign currency translation of $6.4 million.

Net sales in the Material Handling Segment increased $51.5 million or 14% in 2014 compared to 2013. The increase in net sales was mainly attributable to the inclusion of $39.4 million of net sales from the date of acquisition of Scepter that was completed July 2, 2014. Also contributing to the increase in net sales was improved pricing of $12.6 million to offset raw material costs, and higher volume of $5.9 million, driven by strong sales in the industrial, marine and recreational vehicle end markets. The increase in net sales was partially offset by unfavorable foreign currency translation of $6.4 million.

Net sales in the Distribution Segment decreased $12.6 million in 2014 compared to 2013. The decrease in net sales was attributable to a decline in custom sales and the result of the closure of our Canadian branches in the first quarter of 2014.

Cost of Sales & Gross Profit:

Gross profit declined $8.3 million in 2014 compared to 2013 despite an increase in sales. Gross profit margin as a percentage of sales decreased to 25.9% for 2014 compared to 29.0% in the prior year. A weakened demand for our Material Handling Segment's agricultural and food processing products, along with a challenging Brazilian economy, lowered profitability versus the prior year. Higher raw material costs during the year compared to the prior year also negatively impacted gross profit. Raw material costs, primarily plastic resins, polypropylene and polyethylene, were on average, approximately 9% higher in 2014 as compared to the prior year. Also contributing to the reduction in gross margin was a $2.3 million inventory fair value adjustment resulting from our acquisition of Scepter and approximately $1.0 million of restructuring and other unusual charges in 2014, as compared to $0.2 million in 2013.

21

Selling, General and Administrative Expenses:

SG&A expenses increased $13.5 million or 11% from 2013. The inclusion of the Scepter acquisition contributed $11.1 million of incremental SG&A costs in 2014 compared to the prior year. The increase in SG&A expenses in 2014 also included the establishment of a reserve related to a patent infringement legal suit of $3.0 million and approximately $3.6 million of transaction costs related to the acquisition of Scepter. SG&A expenses were reduced by a decrease in employee related costs of $2.8 million, lower outside legal and professional costs of approximately $2.0 million, and lower administrative costs related to facilities of approximately $0.9 million. Also in 2014, a favorable adjustment of $1.2 million was recorded to reduce contingent consideration recorded in a prior period due to a change in projections used to estimate expected payments at December 31, 2014. In addition, higher freight costs of $0.8 million were incurred during 2014 as compared to 2013. SG&A expenses for 2014 included restructuring and other unusual charges of approximately $2.2 million compared to $0.4 million in the prior year. Shipping and handling costs, including freight, are primarily classified as SG&A expenses.

Net Interest Expense:

Net interest expense was $8.5 million in 2014 compared to $4.5 million in 2013. The increase in net interest expense is due to the higher average debt balance. The increase in outstanding borrowings in 2014 compared to the prior year related to our senior unsecured notes and higher balance outstanding under our credit facility as a result of our Scepter acquisition in July 2014.

Income Taxes:

The 2014 effective tax rate of 36.4% compared to 33.5% in 2013. The 2014 effective tax rate of 36.4% reflects a $1.8 million reduction in net state and local income taxes, offset by the inability to benefit from losses in Brazil, an increase of $0.6 million in non-deductible acquisition and a $0.9 million increase in compensation costs. The 2013 effective tax rate reflects approximately $1.2 million of tax benefits from the domestic production deduction.

Discontinued Operations:

Loss from discontinued operations, net of income taxes was $17.6 million for the year ended December 31, 2014 compared to a loss from discontinued operations of $0.4 million in the prior period, primarily as a result of an $18.9 million impairment charge. Discontinued operations are comprised of the Lawn and Garden business and WEK. We completed the sale of WEK in June 2014. The Lawn and Garden business was held for sale at December 31, 2014, and sold in February 2015.

Net sales from discontinued operations decreased $35.8 million or 14.9% for the year ended December 31, 2014 compared to the prior year. The decrease in net sales was due to lower sales volume of $37.8 million attributable to the sale of WEK on June 20, 2014, poor weather conditions, transportation issues, operational start-up issues related to our rationalization plan and the negative impact from the effect of unfavorable currency translation of $2.3 million. The decrease in net sales was partially offset by improved pricing of $4.3 million to help mitigate higher raw material costs.

Higher restructuring and other related charges of $11.1 million for the year ended December 31, 2014 compared to $9.3 million in the comparable prior period negatively impacted results. The asset impairment charge of $18.9 million was recorded to reflect the excess carrying value over fair value less cost to sell the Lawn and Garden business.

22

Gain on sale of discontinued operations was $4.6 million, net of tax of $1.6 million, resulting in an after tax gain of $3.0 million related to the sale of WEK on June 20, 2014.

Financial Condition & Liquidity and Capital Resources

Operating Activities

Cash provided by operating activities from continuing operations was $49.4 million, $51.8 million and $74.9 million for the years ended December 31, 2015, 2014 and 2013, respectively.

The decrease in cash provided by continuing operations during the year ended December 31, 2015 was mainly due to a use of working capital, partially offset by higher net income. Accounts payables and accrued expenses had a negative impact on operating cash flows in 2015 of $13.1 million compared to positive cash flows of $8.1 million in 2014 due to lower accounts payable primarily related to the impact of lower raw material costs, the reversal of the prior year legal accrual related to the Orbis litigation as described in Note 9 and lower taxes payable in 2015 compared to 2014.

Net income from continuing operations was $14.1 million in 2015 compared to $9.0 million in 2014. Depreciation and amortization costs from continuing operations were $35.0 million in the year ended December 31, 2015, compared to $31.2 million for the year ended December 31, 2014. The higher depreciation and amortization are attributable to the higher level of assets placed in service over the past several years and assets acquired in connection with the acquisition of Scepter.

The decrease of $23.2 million in operating cash flow from 2013 to 2014 was attributable to decreased earnings and a decrease in the cash provided from working capital compared to the prior year. Net income from continuing operations was $9.0 million in 2014 compared to $26.4 million in 2013. Cash provided by working capital was $12.2 million in 2014 compared to cash provided of $27.0 million in 2013. The decrease was primarily the result of a decline in cash provided from accounts payable and accrued expenses as a result of timing of payments and lower taxes payable due to a decline in earnings.

Investing Activities

Capital expenditures were $23.7 million, $24.2 million and $20.7 million for the years ended December 31, 2015, 2014 and 2013, respectively. Higher capital spending in 2015 and 2014 compared to 2013 was due to additional investments that were made for new manufacturing focused on growth and productivity improvements in addition to higher spending due to Scepter. During 2015, the Company received approximately $69.8 million in cash proceeds in connection with the sale of the Lawn and Garden business and $1.0 million in connection with the sale of WEK. The Company paid approximately $156.6 million in connection with the acquisition of Scepter during 2014. In 2013, the Company purchased an equity interest in a non-consolidated subsidiary, included in the Distribution segment, for approximately $0.6 million.

Financing Activities

Under a share repurchase plan, the Company used cash of $30.0 million to purchase 1,992,379 shares of its stock in 2015, $54.9 million to purchase 2,742,506 shares of its stock in 2014 and $8.1 million to purchase 530,983 shares of its stock in 2013. In addition, the Company used cash to pay dividends of $16.7 million, $15.7 million and $9.1 million for the years 2015, 2014 and 2013, respectively. Lower dividend payments in 2013 resulted from the accelerated fourth quarter dividend payment made in December 2012 to reduce the tax impact for our shareholders in 2013.

Credit Sources

On December 13, 2013, the Company entered into a Fourth Amended and Restated Loan Agreement (the “Loan Agreement”). The agreement provided for a $200 million senior revolving credit facility expiring on December 13, 2018, which replaced the existing $180 million facility.

In addition, on May 30, 2014, the Company entered into a First Amendment to the Fourth Amended and Restated Loan Agreement (the "Loan Amendment"). The Loan Amendment increased the senior revolving credit facility from $200 million to $300 million through December 2018 and provided for an additional subsidiary of the Company as a borrower and another subsidiary of the Company as a guarantor of the credit facility. On July 2, 2014, the Company borrowed approximately $135.3 million under the Loan Agreement to fund the acquisition of Scepter. Amounts borrowed under the agreement are secured by pledges of stock of certain of our foreign and domestic subsidiaries.

23

Borrowings under the Loan Agreement bear interest at the LIBOR rate, prime rate, federal funds effective rate, the Canadian deposit offered rate, or the eurocurrency reference rate depending on the type of loan requested by the Company, in each case plus the applicable margin as set forth in the Loan Agreement.

The Company has Senior Unsecured Notes totaling $100 million with a group of investors pursuant to a note purchase agreement. The series of four notes range in face value from $11 million to $40 million, with interest rates ranging from 4.67% to 5.45%, payable semiannually, and expiring between 2021 and 2026.

Total debt outstanding at December 31, 2015 was $193.0 million, net of deferred financing costs, compared with $236.4 million at December 31, 2014. A portion of the cash proceeds from the sale of the Lawn and Garden business was used to pay down debt. The Company’s Loan Agreement provides available borrowing up to $300 million, reduced for letters of credit issued. As of December 31, 2015, the Company had $4.3 million of letters of credit issued related to insurance and other financing contracts in the ordinary course of business. As of December 31, 2015, there was $202.2 million available under our Loan Agreement.

As of December 31, 2015, the Company was in compliance with all its debt covenants. The most restrictive financial covenants for all of the Company’s debt are an interest coverage ratio (defined as earnings before interest, taxes, depreciation and amortization, as adjusted, divided by interest expense) and a leverage ratio (defined as total debt divided by earnings before interest, taxes, depreciation and amortization, as adjusted). The ratios as of and for the period ended December 31, 2015 are shown in the following table:

The Company believes that cash flows from operations and available borrowing under its Loan Agreement will be sufficient to meet expected business requirements including capital expenditures, dividends, working capital, debt service and to fund the stock repurchase program into the foreseeable future.

Contractual Obligations

The following summarizes the Company’s estimated future cash outflows from financial contracts and commitments reflecting our current debt structure:

Uncertain tax position liabilities are excluded from the contractual obligations table because a reasonably reliable estimate of the period of cash settlement with the respective tax authority cannot be made.

Critical Accounting Policies

Our discussion and analysis of the Company’s financial condition and results of operations are based on the accompanying consolidated financial statements, which are prepared in accordance with accounting principles generally accepted in the United States of America. As indicated in the Summary of Significant Accounting Policies included in the Notes to Consolidated Financial Statements (included in Item 8 of this report), the amount of assets, liabilities, revenue and expenses reported are affected by estimates and judgments that are necessary to comply with generally accepted accounting principles. We base our estimates on prior experience and other assumptions that we consider reasonable to our circumstances. We believe the following matters may involve a high degree of judgment and complexity.

Inventory — Inventories are valued at the lower of cost or market for last-in, first-out (“LIFO”) inventory and lower of cost or net realizable value for first-in, first-out (“FIFO”) inventory. Cost is determined by the LIFO method for approximately 40 percent of the Company’s inventories and the FIFO method for all other inventories. Where appropriate, standard cost systems are utilized and appropriate variances are evaluated for purposes of determining cost; the standards are adjusted as necessary to ensure they approximate actual costs. Estimates of lower of cost or market value of inventory are determined based upon current economic conditions, historical sales quantities and patterns and, in some cases, the specific risk of loss on specifically identified inventories.

24

Goodwill — Goodwill is subjected to annual impairment testing, unless significant changes in circumstances indicate a potential impairment may have occurred sooner. We conduct our annual impairment assessment as of October 1. We perform a two-step quantitative assessment to determine whether the fair value of a reporting unit is less than its carrying value.

Goodwill impairment testing requires, in part, that we estimate the fair value of our reporting units which, in turn, requires that we make judgments concerning future cash flows and appropriate discount rates for those reporting units. Fair values are established using comparative market multiples in the current market conditions and discounted cash flows. The discount rates used are based on the weighted average cost of capital determined for each of the Company’s reporting units and ranged from 11.0% to 14.5% in 2015. In addition we would make certain judgments about the selection of comparable companies used in determining market multiples in valuing our reporting units. We also compare our book value and the estimates of fair value of the reporting units to our market capitalization as of and at dates near the annual testing date. Management uses this comparison as additional evidence of the fair value of the Company, as our market capitalization may be suppressed by other factors such as the control premium associated with a controlling shareholder, our leverage or general expectations regarding future operating results and cash flows. In situations where the implied value of the Company under the Income or Market Approach are significantly different than our market capitalization we re-evaluate and adjust, if necessary, the assumptions underlying our Income and Market Approach models.

Based on procedures conducted to test impairment of goodwill of the Company’s reporting units, the fair values of the Plasticos Novel do Nordeste S. A. (“Novel”) and Jamco Products, Inc. (“Jamco”) reporting units did not substantially exceed their carrying value as of our assessment date in 2015. The estimated fair value of Novel and Jamco exceeded their carrying values by approximately 10% and 20%, respectively. Although no goodwill impairment charge is required for 2015, it does present a risk of future impairment for the goodwill assigned to those reporting units. The decline in the fair values of these businesses was driven primarily by reduced profitability as a result of lower margins and a prolonged economic downturn in the Brazilian economy impacting Novel. As a result, management decreased future projections of the operating results and cash flows in assessing goodwill at these reporting units. The Company is making necessary changes in operations to improve profitability in these businesses. If expected future forecasted results for these businesses are not achieved it may result in the Company recording impairment charges for these reporting units in future periods.

Contingencies — In the ordinary course of business, we are involved in various legal proceedings and contingencies. We have recorded liabilities for these matters in accordance with FASB ASC 450, Contingencies (“ASC 450”). ASC 450 requires a liability to be recorded based on our estimate of the probable cost of the resolution of a contingency. When management believes that a loss arising from these matters is probable and can reasonably be estimated, we record the amount of the estimated loss, or the minimum estimated liability when the loss is estimated using a range, and no point within the range is more probable of occurrence than another. As additional information becomes available, any potential liability related to these matters will be assessed and the estimates will be revised, if necessary. The actual resolution of these contingencies may differ from our estimates. If a contingency were settled for an amount greater than our estimate, a future charge to income would result. Likewise, if a contingency were settled for an amount that is less than our estimate, a future credit to income would result.

Revenue Recognition — We recognize revenues from the sale of products, net of actual and estimated returns, at the point of passage of title and risk of loss, which is generally at time of shipment, and collectability of the fixed or determinable sales price is reasonably assured.

Income Taxes — Deferred income taxes are provided to recognize the effect of temporary differences between financial and tax reporting. Deferred income taxes are not provided for undistributed earnings of foreign consolidated subsidiaries as it is our intention to reinvest such earnings for an indefinite period of time. The Company has operations outside the U.S. and in jurisdictions with statutory tax rates lower than in the U.S. As a result, significant tax and treasury planning of future operations are necessary to determine the proper amounts of tax assets, liabilities and expense to be recognized. FASB ASC 740, Income Taxes ("ASC 740") requires that deferred tax assets be reduced by a valuation allowance, if based on all available evidence, it is more likely than not that the deferred tax asset will not be realized. The Company evaluates the recovery of its deferred tax assets by assessing the adequacy of future expected taxable income from all sources, including reversal of taxable temporary differences, forecasted operating earnings and available tax planning strategies. These sources of income inherently rely heavily on estimates.

Also, significant judgment is required in determining the Company’s tax expense and in evaluating its tax positions, including evaluating uncertainties under ASC 740. We review our tax positions quarterly and adjust the balances as new information becomes available.

Recent Accounting Pronouncements

Information regarding the recent accounting pronouncements is contained in the Summary of Significant Accounting Policies footnote of the Notes to Consolidated Financial Statements under Item 8 of this report.

25

Market Risk and Derivative Financial Instruments

The Company has certain financing arrangements that require interest payments based on floating interest rates. The Company’s financial results are subject to changes in the market rate of interest. At present, the Company has not entered into any interest rate swaps or other derivative instruments to fix the interest rate on any portion of its financing arrangements with floating rates. Accordingly, based on current debt levels at December 31, 2015, if market interest rates increase one percent, the Company’s interest expense would increase approximately $0.9 million annually.

Some of the Company’s subsidiaries operate in foreign countries and their financial results are subject to exchange rate movements. The Company has operations in Canada with foreign currency exposure, primarily due to sales made from businesses in Canada to customers in the United States ("U.S."). These sales are denominated in U.S. dollars. In addition, the Company’s subsidiary in Brazil has loans denominated in U.S. dollars. The Company has a systematic program to limit its exposure to fluctuations in exchange rates related to certain assets and liabilities of its operations in Canada and Brazil that are denominated in U.S. dollars. The net exposure generally ranges from $2 million to $7 million. The foreign currency contracts and arrangements created under this program are not designated as hedged items under Financial Accounting Standards Board (“FASB”) Accounting Standard Codification (“ASC”) 815, Derivatives and Hedging, and accordingly, the changes in the fair value of the foreign currency arrangements, which have been immaterial, are recorded in the income statement. The Company’s foreign currency arrangements are typically three months or less and are settled before the ending of a reporting period. At December 31, 2015, the Company had no foreign currency arrangements or contracts in place.

The Company uses certain commodities, primarily plastic resins, in its manufacturing processes. The cost of operations can be affected as the market for these commodities changes. The Company currently has no derivative contracts to hedge this risk; however, the Company also has no significant purchase obligations to purchase fixed quantities of such commodities in future periods. Significant future increases in the cost of plastic resin or other adverse changes in the general economic environment could have a material adverse impact on the Company’s financial position, results of operations or cash flows.

26

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders of

Myers Industries, Inc. and Subsidiaries

We have audited the accompanying consolidated statements of financial position of Myers Industries, Inc. and Subsidiaries as of December 31, 2015 and 2014, and the related consolidated statements of operations, comprehensive income (loss), shareholders’ equity and cash flows for each of the three years in the period ended December 31, 2015. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement.  An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Myers Industries, Inc. and Subsidiaries at December 31, 2015 and 2014, and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2015, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Myers Industries, Inc. and Subsidiaries' internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework), and our report dated March 14, 2016 expressed an adverse opinion thereon.

/s/ Ernst & Young LLP

Akron, Ohio

March 14, 2016

27

MYERS INDUSTRIES, INC. AND SUBSIDIARIES

Consolidated Statements of Operations

For the Years Ended December 31, 2015, 2014 and 2013

(Dollars in thousands, except per share data)

The accompanying notes are an integral part of these statements.

28

MYERS INDUSTRIES, INC. AND SUBSIDIARIES

Consolidated Statements of Comprehensive Income (Loss)

For the Years Ended December 31, 2015, 2014 and 2013

(Dollars in thousands)

The accompanying notes are an integral part of these statements.

29

MYERS INDUSTRIES, INC. AND SUBSIDIARIES

Consolidated Statements of Financial Position

As of December 31, 2015 and 2014

(Dollars in thousands)