Neonode Inc. - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒   ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

or

☐   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________ to _________

Commission File No. 001-35526

NEONODE INC.

(Exact name of Registrant as specified in its charter)

Karlavägen 100, 115 26 Stockholm, Sweden

(Address of Principal Executive Office and Zip Code)

+46 (0) 8 667 17 17

(Registrant’s Telephone Number, including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐  No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐   No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒   No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).  Yes ☒   No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act. Yes ☐   No ☒

The aggregate market value of voting and non-voting common equity held by non-affiliates of the registrant, based on the closing price for the registrant’s common stock on June 30, 2021 (the last business day of the registrant’s most recently completed second fiscal quarter) as reported on the Nasdaq Stock Market, was $41,885,928.

The number of shares of the registrant’s common stock outstanding as of March 3, 2022 was 13,575,952.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive proxy statement for the registrant’s 2022 Annual Meeting of Stockholders are incorporated by reference as set forth in Part III of this Annual Report. The registrant intends to file such definitive proxy statement with the Securities and Exchange Commission within 120 days of the registrant’s fiscal year ended December 31, 2021.

NEONODE INC.

2021 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

SPECIAL NOTE ON FORWARD-LOOKING STATEMENTS

This Annual Report of Form 10-K (“Annual Report”) contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, adopted pursuant to the Private Securities Litigation Reform Act of 1995. Forward-looking statements provide current expectations of future events based on certain assumptions and include any statement that does not directly relate to any historical or current fact. For example, statements in this Annual Report regarding our plans, strategy and focus areas, expectations regarding future sales and customers, and the potential future impact of the COVID-19 pandemic on our business and results of operations are forward-looking statements. You can identify some forward-looking statements by the use of words such as “believe,” “anticipate,” “expect,” “intend,” “goal,” “plan” and similar expressions. Forward-looking statements involve inherent risks and uncertainties regarding events, conditions and financial trends that may affect our future plans of operation, business strategy, results of operations and financial position. A number of important factors could cause actual results to differ materially from those included within or contemplated by such forward-looking statements, including, but not limited to risks relating to our history of losses since inception, our dependence on a limited number of customers, our reliance on our customers’ ability to develop and sell products that incorporate our touch technology, the length of a product development and release cycle, our and our customers’ reliance on component suppliers, the difficulty in verifying royalty amounts owed to us, our limited experience manufacturing hardware devices, our ability to remain competitive in response to new technologies, our dependence on key members of our management and development team, the costs to defend, as well as risks of losing, patents and intellectual property rights, and our ability to obtain adequate capital to fund future operations. For a discussion of these and other factors that could cause actual results to differ from those contemplated in the forward-looking statements, please see “Item 1A. Risk Factors” and elsewhere in this Annual Report, and in our publicly available filings with the Securities and Exchange Commission. Forward-looking statements reflect our analysis only as of the date of this Annual Report. Because actual events or results may differ materially from those discussed in or implied by forward-looking statements made by us or on our behalf, you should not place undue reliance on any forward-looking statement. We do not undertake responsibility to update or revise any of these factors or to announce publicly any revision to forward-looking statements, whether as a result of new information, future events or otherwise. 

PART I

Neonode Inc., collectively with its subsidiaries, is referred to in this Annual Report as “Neonode”, “we”, “us”, “our”, “registrant”, or “Company”.

We use Neonode, our logo, zForce, MultiSensing, AirBar and other marks as trademarks. This Annual Report contains references to our trademarks and service marks and to those belonging to other entities. Solely for convenience, trademarks and trade names referred to in this Annual Report, including logos, artwork and other visual displays, may appear without the ® or ™ symbols, but such references are not intended to indicate in any way that we will not assert, to the fullest extent under applicable law, our rights or the rights of the applicable licensor to these trademarks and trade names.

Our company provides advanced optical sensing solutions for contactless touch, touch, and gesture sensing. We also provide software solutions for scene analysis that feature advanced machine learning algorithms to detect and track persons and objects in video streams for cameras and other types of imagers. We base our contactless touch, touch, and gesture sensing products and solutions using our zForce technology platform and our scene analysis solutions on our MultiSensing technology platform. zForce (zero force) is the name for our patented optical sensing technology built on infrared light, invisible to the human eye. Our MultiSensing platform was designed to provide advanced, safe and traceable software applications to provide situational context. We market and sell our solutions to customers in many different markets and segments including, but not limited to, office equipment, automotive, industrial automation, medical, military and avionics.

In 2010, we began licensing to Original Equipment Manufacturers (“OEMs”) and Tier 1 suppliers who embed our technology into products they develop, manufacture, and sell. Since 2010, our licensing customers have sold approximately 85 million devices that use our technology. In October 2017, we augmented our licensing business and began manufacturing and shipping touch sensor modules (“TSMs”) that incorporate our patented technology. We sell these embedded sensors modules to OEMs, Original Design Manufacturers (“ODMs”), and systems integrators for use in their products.

As of December 31, 2021, we had 11 agreements with value added resellers (“VARs”) for integration of our sensor modules in the products they offer to global OEMs, ODMs and systems integrators. In addition to this, we distribute our embedded sensor modules through Digi-Key Corporation, Serial Microelectronics HK Ltd, and Nexty Electronics Corporation.

In our operations, we have since the beginning of 2020 focused on three different business areas, HMI Solutions, HMI Products and Remote Sensing Solutions (“HMI” is short for Human-Machine Interaction). On May 4, 2021, we announced a new strategy and organizational update targeting an increased focus on our contactless touch business and on current market opportunities in North America (“AMER”), Asia-Pacific (“APAC”), and Europe, Middle East and Africa (“EMEA”). As a result, we transitioned from a business area organization to a regional sales organization going forward. Revenues are however primarily monitored for each of our revenue streams consisting of license fees, product sales and non-recurring engineering (“NRE”) services.

During 2021 and 2020 we continued to focus our efforts on maintaining our current licensing customers and achieving design wins for new products both with current and future customers. We made investments enhancing the design and improving the production yield of our TSMs and improving the related firmware and configuration tools software platforms. We also made investments to expand our partner networks for sales and distribution of TSMs. We intend to continue expanding our TSM product offerings in 2022 and beyond, including new TSM variants and new sensor products for delivery to our key markets. We expect that over time the sales of TSMs and other sensor products may constitute the majority of our revenue.

License fees

We license our zForce technology to OEMs and Tier 1 suppliers who embed our technology into products they develop, manufacture and sell. Since 2010, our licensing customers have sold approximately 85 million devices that use our patented technology.

As of December 31, 2021, we had 34 valid technology license agreements with global OEMs, ODMs and Tier 1 suppliers.

Our licensing customer base is primarily in the automotive and printer segments. Eleven of our licensing customers are currently shipping products that embed our technology. We anticipate current customers will continue to ship products with our technology in 2022 and in future years. We also expect to expand our customer base with a number of new customers who will be looking to ship new products incorporating our zForce and MultiSensing technologies as they complete final product development and release cycles. We typically earn our license fees on a per unit basis when our customers ship products using our technology, but in the future also other business models may be used.

Product sales

In addition to our technical solutions business, we design and manufacture TSMs that incorporate our patented technology. We sell our TSMs to OEMs, ODMs and systems integrators for use in their products. We also sell our Neonode branded AirBar product that incorporates one of our TSMs through distributors.

We utilize a robotic manufacturing process designed specifically for our components. Our TSMs are commercial-off-the-shelf products based on our patent-protected zForce technology platform and can support the development of contactless touch, touch, gesture and object sensing solutions that, paired with our technology licensing offering, give us a full range of options to enter and compete in key markets.

In October 2017, we began selling our TSMs to customers in the industrial and consumer electronics segments. Over time, we expect a significant portion of our revenues will be derived from TSM sales. 

Non-recurring engineering services

We also offer NRE services related to application development linked to our TSMs and our zForce and MultiSensing technology platforms on a flat rate or hourly rate basis.

Typically, our licensing customers require engineering support during the development and initial manufacturing phase for their products using our technology, while our TSM customers require hardware or software modifications to our standard products or support during the development and initial manufacturing phases of their products using our technology. In both cases we can offer NRE services and earn NRE revenues.

Our Organization

Neonode Inc. was incorporated in the State of Delaware on September 4, 1997. Our principal executive office is located in Stockholm, Sweden. Our office in the United States is located in San Jose, California.

We have the following wholly owned subsidiaries: Neonode Technologies AB (Sweden) (established in 2008 to develop and license touchscreen technology); Neonode Japan Inc., (Japan) (established in 2013); and Neonode Korea Ltd. (South Korea) (established in 2014). In 2015, we established a 51% majority owned consolidated subsidiary, Pronode Technologies AB (Sweden).

Strategy and Focus Areas

Our customers use contactless touch, touch on surface, gesture sensing, and scene analysis technologies to grow their businesses, drive efficiencies, and seek competitive advantages. Our strategy is to deliver value-adding human-machine interaction (“HMI”) and scene analysis solutions and products that enable our customers to achieve these targets. Our strategy is further to offer specialized NRE services related to the integration of our solutions and products into customer systems and products to ensure that optimal functionality and performance is achieved.

Our goal is to become a market leader in the area of contactless touch interfaces, expanding our TSM sales in markets where our contactless touch technology provides end-customer value and increased competitiveness for our customers, value-added resellers, and technology partners, while continuing to be a leader in optical touch and gesture sensing technology by licensing customized solutions. We also aim to capture a share of the growing driver and in-cabin monitoring market by developing our scene analysis business. We are innovators in the HMI and scene analysis areas and our goal is to introduce next-generation products in these areas that offer better price and performance and architectural advantages compared to our current offers and those of our competitors. We intend to execute on this strategy through portfolio transformation, internal innovation, and co-development of products with our customers and the building of strategic partnerships with technology companies.  

Markets

Automotive

The Automotive value chain consists of OEMs (vehicle manufacturers) and tiered suppliers (Tier 1 system suppliers, Tier 2 component suppliers etc.). In this market, we mainly act as a Tier 2 technology provider to Tier 1 suppliers who license our technology and deliver different types of systems to OEMs, (e.g. infotainment system displays featuring our touch technology). In some cases, we are also engaged directly by OEMs, following the trend that OEMs are insourcing more and more of their systems and software development directly.

During each of 2021 and 2020, our Automotive customers shipped approximately 0.8 million products.

Printers and Office Equipment

Multi-function printers typically feature touch displays for user interaction with feature-rich menus and settings. We have operational license agreements with three of the leading global printers and office equipment OEMs. During 2021 our customers shipped approximately five million printers using our touch technology and since mid-2014 they have shipped approximately 47 million printers using our touch technology.

Military and Avionics

Mechanical switches and buttons and older types of touch displays in airplane cockpits are increasingly being replaced with larger touch displays with higher performance capabilities. Our zForce technology has demonstrable advantages for these type of applications, as it provides low latency, superior image clarity, can be operated by pilots wearing gloves, has excellent electro-magnetic interference and electro-magnetic compatibility properties, and works well with night vision systems. zForce is also suitable for other military applications for these reasons.

Industrial Automation

We see interesting opportunities for our optical touch and gesture control solutions in the rugged industrial touchscreen market. We also see potential demand for our scene analysis solutions in industrial settings.  

Medical

We sell our TSMs to customers manufacturing and selling medical imaging systems with touch screens. Looking to the future, we see interesting opportunities for our TSMs to be incorporated into similar touch applications, and for various contactless touch applications, and opportunities for our zForce-based optical touch and gesture control solutions in the medical touchscreen market.

Elevators and Interactive Kiosks

The COVID-19 pandemic has created strong consumer demand for technologies that eliminate direct physical contact between users and different types of machines and systems in public environments such as self-service kiosks, vending machines, and elevators. Using our TSMs, OEMs can easily create safe, intuitive, and easy-to-use contactless touch interfaces for their elevator and kiosk products. Our TSMs are also very suitable for retrofit applications and many of our OEM customers, value-added resellers, and technology partners have or are developing such solutions and marketing and selling them in their respective markets. We have a strong and increasing demands for our TSMs from customers in these markets and expect to grow this business significantly in the coming years.

Product Backlog

Our TSM product backlog as of December 31, 2021 was approximately $239,000. The product backlog includes orders confirmed for products planned to be shipped within eight months to seven customers. Our cycle time between order and shipment is generally short and customers occasionally change delivery schedules. Additionally, orders can be cancelled without significant penalties. As a result of these factors, we do not believe that our product backlog, as of any particular date, is necessarily indicative of actual product revenue for any future period.

Customers

As of December 31, 2021 we had 34 valid technology license agreements. As of December 31, 2020, that number was 42. During the year ended December 31, 2021, we had 11 customers using our touch technology in products that were being shipped to their customers. The products related to these license agreements include e-readers, tablets, commercial and consumer printers, automotive infotainment system displays, and global positioning system (GPS) devices.

Our customers are primarily located in North America, Europe and Asia.

As of December 31, 2021, four of our customers represented approximately 76% of our consolidated accounts receivable and unbilled revenues.

As of December 31, 2020, four of our customers represented approximately 62% of our consolidated accounts receivable and unbilled revenues.

Customers who accounted for 10% or more of our revenues during the year ended December 31, 2021 are as follows.

Customers who accounted for 10% or more of our revenues during the year ended December 31, 2020 are as follows.

Customers by Market

The following table presents our revenues by market as a percentage of total revenues for the years ended December 31:

Geographical Data

The following table presents our revenues by geographic region as a percentage of total revenues for the years ended December 31:

The following table presents our total assets by geographic region as of December 31 (in thousands):

Competition

There are various technologies for touch and gesture control solutions available that compete with our optical zForce technology. The competing technologies have differing profiles such as performance, power consumption, level of maturity and cost. For touch solutions, the main competition comes from resistive and capacitive touch solutions. For touch displays, projective capacitive technology is the prevalent standard in mobile phones and tablets and therefore an important competing technology to ours that many suppliers offer with price being a major differentiation point. This means we must continuously develop our technology and improve our offers to defend and grow our market share. For gesture control the main competition comes from other optical technologies and from both ultrasonic and radar technologies. Examples of competitors active in the area of gesture sensing include Ultraleap and suppliers of radar and ultrasonic sensor chips, for instance Texas Instruments and Acconeer. Detection range, resolution and cost are the main differentiators.

For contactless touch opportunities, competing technologies include camera-based technologies for detecting finger placement and gestures in the airspace in front of a kiosk or button panel, capacitive sensors capable of detecting a finger hovering above a display or button, as well as voice-activated interfaces and interfaces using one’s mobile phone to interact with a kiosk or button panel.

There are various driver and in-cabin monitoring solutions that compete with our MultiSensing technology. Our competitors among Tier 2 software providers include SmartEye, Xperi, EyeSight, Seeing Machines, PUX and Jungo.   

Intellectual Property

We rely on a combination of intellectual property laws and contractual provisions to establish and protect the proprietary rights in our technology. The number of our issued and pending patents and patents filed in each jurisdiction as of December 31, 2021 is set forth in the following table: 

Our patents cover optical blocking technologies for touchscreens and head-up displays, optical reflective technologies for contactless interaction with kiosks and elevators, as well as optical solutions for vehicle cabin monitoring and driver interfaces.

Our software may also be protected by copyright laws in most countries, including Sweden and the European Union, which will not grant patent protection for the software itself, if the software is deemed new and original. Protection can be claimed from the date of creation. 

In 2021 we filed eight new patent applications and had six new patent grants issued; certain other patents have lapsed.

The duration of our patent protection for utility patents is generally 20 years. The duration of our patent protection for design patents varies throughout the world between 10 and 25 years, depending on the jurisdiction. We believe the duration of our intellectual property rights is adequate relative to the expected lives of our products.

We also protect and promote our brand by registering trademarks in key markets around the world. Our trademarks include: Neonode (22 registrations), the Neonode logo (15 registrations) and zForce (10 registrations), as well as a pending European trademark application for the mark MultiSensing. In 2021, we strengthened our Neonode brand globally with 12 new applications for the mark NEONODE in Asia, Europe and the Middle East.

Research and Development  

In fiscal years 2021 and 2020, we spent $3.5 million and $4.1 million, respectively, on research and development activities. Our research and development is performed predominantly in-house, but may also be performed in collaboration with external partners and specialists.

Human Capital

The development, attraction and retention of employees is a critical success factor for Neonode.

We took steps to increase our employee focus during 2021, including hiring of a dedicated Human Relations (“HR”) Manager and expanding our effort to ensure clear and beneficial HR-related processes, such as talent management, employee engagement and recruitment performance.

Since the COVID-19 pandemic emerged, our employees have been permitted to work remotely. For those choosing to come to the office, free parking has been offered and social distancing has been promoted. As the COVID-19 pandemic has begun to subside, our employees are gradually returning to the office.

We work proactively against all discrimination, harassment and other abusive behavior to ensure the work environment at Neonode is good and healthy.

On December 31, 2021, we had 47 employees (including 45 full-time employees) and 10 consultants. There was a total of six employees in our general and administrative team, eight in our sales and marketing team, 25 in our engineering team, and eight in our production team at Pronode Technologies AB. We have employees and/or consultants located in the United States, Sweden, United Kingdom, Japan, South Korea and Taiwan. None of our employees is represented by a labor union. We have experienced no work stoppages. We believe our employee relations are positive.

Additional Information

We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) and we file or furnish reports, proxy statements, and other information with the Securities and Exchange Commission (“SEC”). The reports and other information filed by us with the SEC are available free of charge on the SEC’s website at www.sec.gov.

Our website is www.neonode.com. We make available free of charge through our website all of our filings with the SEC, including our annual reports on Form 10-K, quarterly reports on Form 10-Q, and current reports on Form 8-K as well as Form 3, Form 4, and Form 5 reports for our directors, officers, and principal stockholders, together with amendments to those reports filed or furnished pursuant to Sections 13(a), 15(d), or 16 under the Exchange Act. These reports are available as soon as reasonably practicable after their electronic filing or furnishing with the SEC. Our website also includes corporate governance information, such as our Code of Business Conduct (including a Code of Ethics for the Chief Executive Officer and Senior Financial Officers) and our Board of Directors’ Committee Charters. The information contained on our website is not a part of, nor is it incorporated by reference into, this Annual Report.

An investment in our common stock involves a high degree of risk. Before deciding to purchase, hold, or sell our common stock, you should consider carefully the risks described below in addition to the cautionary statements and risks described elsewhere in this Annual Report and in our other filings with the SEC, including subsequent reports on Forms 10-Q and 8-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also impair our business operations. If any of these known or unknown risks or uncertainties actually occur, our business, financial condition, results of operations or cash flows could be seriously harmed. This could cause the trading price of our common stock to decline, resulting in a loss of all or part of your investment.

Risks Related to Our Business

We have had a history of losses and may require additional capital to fund our operations, which may not be available to us on commercially attractive terms or at all.

We have experienced substantial net losses in each fiscal period since our inception. These net losses have resulted from a lack of substantial revenues and the significant costs incurred in the development and commercial acceptance of our technologies. Our ability to continue as a going concern is dependent on our ability to implement our business plan. If our operations do not become cash flow positive, we may be forced to seek sources of capital to continue operations. No assurances can be given that we will be successful in obtaining such additional financing on reasonable terms, or at all. If adequate funds are not available when needed on acceptable terms, or at all, we may be unable to adequately fund our business plan, which could have a negative effect on our business, results of operations, and financial condition.

We may, in the short and long-term, seek to raise capital through the issuance of equity securities or through other financing sources. To the extent that we raise additional funds by issuing equity securities, our stockholders may experience significant dilution. Any debt financing, if available, may include financial and other covenants that could restrict our use of the proceeds from such financing or impose other business and financial restrictions on us. In addition, we may consider alternative approaches such as licensing, joint venture, or partnership arrangements to provide long term capital.

We are dependent on a limited number of customers.  

Our license revenues for the year ended December 31, 2021 were earned from 11 OEM, ODM and Tier 1 customers. We generated NRE revenues from five customers for the year ended December 31, 2021. During the year ended December 31, 2021, three customers represented approximately 63% of our consolidated net revenues. Our customer concentration may change significantly from period-to-period depending on a customer’s product cycle and changes in our industry. In addition, our customer composition may change as we transition to selling more sensor modules in parallel to our licensing business. The response of customers to our sensor products, loss of a major customer, a reduction in net revenues of a major customer for any reason, or a failure of a major customer to fulfill its financial or other obligations due to us could have a material adverse effect on our business, financial condition, and future revenue stream.

We rely on the ability of our customers to design, manufacture and sell their products that incorporate our touch technology.

We have historically generated revenue through technology licensing agreements with companies that design, manufacture, and sell their own products incorporating our touch technology. The majority of our license fees earned in 2021 and 2020 were from customer shipments of printer products and automotive infotainment systems. Although we have broadened our business model to selling sensors in addition to licensing our technology, we expect to continue to rely on licensing revenue from current and new customers whose products are still in the development cycle. If our customers are not able to design, manufacture and sell their products, or are delayed in producing and selling their products, our revenues, profitability, and liquidity, as well as our brand image, may be adversely affected.

The length of a customer’s product development and release cycle depends on many factors outside of our control and any delays could cause us to incur significant expenses without offsetting revenues, or revenues that vary significantly from quarter to quarter.

The development and release cycle for customer products is lengthy and unpredictable. Our customers often undertake significant evaluation and design in the qualification of our products, which contributes to a lengthy product release cycle. The typical product development and release cycle is 18 to 36 months. The development and release cycle may be longer in some cases, particularly for automotive vehicle products. There is no assurance that a customer will adopt our technology after the evaluation or design phase. The lengthy and variable development and release cycle for products may also have a negative impact on the timing of our revenues, causing our revenues and results of operations to vary significantly from quarter to quarter.

We and our license customers rely upon component suppliers to manufacture and sell products containing our technology and limited availability of components, including as a result of the COVID-19 pandemic, may adversely affect our and our customers’ businesses.

Under our licensing model, OEMs, ODMs and Tier 1 suppliers manufacture or contract to manufacture products that include Neonode’s special Application Specific Integrated Circuits (“ASICs”) that incorporate our patented technology. The Neonode ASICs are manufactured by Texas Instruments and ST Microelectronics. Texas Instruments manufactures two ASIC components that both we and our license customers buy. As part of their product development process, our customers must qualify these components for use in their products, thus making the components difficult to replace. Under our sensor model, we use a similar ASIC component supplied by ST Microelectronics in our TSM products. If the components provided by Texas Instruments, ST Microelectronics or other suppliers experience quality control or availability problems, our technology may be disqualified by one or more of our customers and our supply chain may be disrupted.

Our dependence on third parties to supply core components that incorporate our patented technology exposes us to a number of risks including the risk that these suppliers will not be able to obtain an adequate supply of raw materials or components, the risk that these suppliers will not be able to meet our customer requirements, and the risk that these suppliers will be able to remain in business or adjust to market conditions. If we and our customers are unable to obtain ASICs that incorporate our patented technology, we may not be able to meet demand, which could have a material adverse effect on our business, financial condition, results of operations and cash flows.

The COVID-19 pandemic has resulted in extended shutdown of businesses all over the world causing general delays in the supply of components. We have not suffered of supply shortage, but it is possible that the shortage of supply has caused delays and/or increased cost of components and thereby harm to our customers’ ability to manufacture and sell products on a cost-effective basis.

It can be difficult for us to verify royalty amounts owed to us under licensing agreements, and this may cause us to lose potential revenue.

Our license agreements typically require our licensees to document the sale of licensed products and report this data to us on a quarterly basis. Although our standard license terms give us the right to audit books and records of our licensees to verify this information, audits can be expensive, time consuming, incomplete, and subject to dispute. From time to time, we audit certain of our licensees to verify independently the accuracy of the information contained in their royalty reports in an effort to decrease the likelihood that we will not receive the royalty revenues to which we are entitled under the terms of our license agreements, but we can give no assurances that these audits will be effective.

We have limited experience in manufacturing products and our entry into the hardware market may not be successful.

Our business model has historically focused on licensing touch technology. In October 2017, we began to manufacture and sell sensor touch components. There can be no assurance that our hardware manufacturing and sales will result in market acceptance or meaningful revenues. The commercial success of our sensor modules will depend on customer response and our management’s execution. The commercial success of our sensor modules is subject to numerous risks, including:

In addition, if demand for our products increases, we will have to invest additional resources to purchase product components, hire and train employees and enhance our manufacturing processes. If we fail to increase our production capacity efficiently, our sales may not increase in line with our expectations and our operating margins could fluctuate or decline.

If we fail to develop and introduce new technology successfully, and in a cost-effective and timely manner, we will not be able to compete effectively and our ability to generate revenues will suffer.

We operate in a highly competitive, rapidly evolving environment, and our success depends on our ability to develop and introduce new technology that our customers and end users choose to buy. If we are unsuccessful at developing new technologies that are appealing to our customers and end users, with acceptable functionality, quality, prices, and terms, we will not be able to compete effectively and our ability to generate revenues will suffer. The development of new technology is very difficult and requires high levels of innovation and competence. The development process is typically also very lengthy and costly. If we fail to anticipate our end users’ needs or technological trends accurately or if we are unable to complete development in a cost effective and timely fashion, we will be unable to introduce new technology into the market or successfully compete with other providers. As we introduce new or enhanced technology or integrate new technology into new or existing customer products, we face risks including, among other things, disruption in customers’ ordering patterns, inability to deliver new technology to meet customers’ demand, possible product and technology defects, and potentially unfamiliar sales and support environments. Premature announcements or leaks of new products, features, or technologies may exacerbate some of these risks. Our failure to manage the transition to newer technology or the integration of newer technology into new or existing customer products could adversely affect our business, results of operations, and financial condition.

Our operating results may fluctuate significantly as a result of a variety of factors, many of which are outside of our control.

As a result of the unpredictability of our customer product development and the nature of the markets in which we compete, it is very difficult for us to forecast accurately. We base our current and future expense estimates largely on our investment plans and estimates of future needs, although some of our expenses are, to a large extent, fixed. We may be unable to adjust spending in a timely manner to compensate for any unexpected revenue shortfall. Accordingly, any significant shortfall in revenues relative to our planned expenditures would have an immediate adverse effect on our business, results of operations and financial condition.

In addition, the following factors, among others, may negatively affect and cause fluctuations in our operating results:

Further, as a strategic response to changes in the competitive environment, we may from time to time make certain pricing, service, or marketing decisions that could have a material and adverse effect on our business, results of operations, and financial condition. Due to the foregoing factors, our revenues and operating results are and will remain difficult to forecast. 

We must enhance our sales and technology development organizations. If we are unable to identify, hire, or retain qualified sales, marketing, and technical personnel, our ability to achieve future revenue may be adversely affected.

We continually monitor and enhance the effectiveness and breadth of our sales efforts in order to increase market awareness and sales of our technology, especially as we expand into new market areas. Competition for qualified sales personnel is intense, and we may not be able to hire the kind and number of sales personnel we are targeting. Likewise, our efforts to improve and refine our technology require skilled engineers and programmers. Competition for professionals capable of expanding our research and development efforts is intense due to the limited number of people available with the necessary technical skills. If we are unable to identify, hire, or retain qualified sales, marketing, and technical personnel, our ability to achieve future revenue may be adversely affected.

We may make acquisitions and strategic investments that are dilutive to existing stockholders, result in unanticipated accounting charges or otherwise adversely affect our results of operations.

We may decide to grow our business through business combinations or other acquisitions of businesses, products or technologies that allow us to complement our existing touch technology offerings, expand our market coverage, increase our workforce, or enhance our technological capabilities. If we make any future acquisitions, we could issue stock that would dilute our stockholders’ percentage ownership, or we may incur substantial debt, reduce our cash reserves and/or assume contingent liabilities. Further, acquisitions and strategic investments may result in material charges, adverse tax consequences, substantial depreciation, deferred compensation charges, in-process research and development charges, and the amortization of amounts related to deferred compensation and identifiable purchased intangible assets or impairment of goodwill. Any of these could negatively impact our results of operations.

We are dependent on the services of our key personnel.  

We are highly dependent on our senior management team, including Dr. Urban Forssell, our Chief Executive Officer, and Fredrik Nihlén, our Chief Financial Officer. Changes in our senior management team or the unplanned loss of the services of either member of our senior management team could have a material adverse effect on our operations and future prospects.

If we are unable to obtain and maintain patent or other intellectual property protection for any products we develop or for our technologies, or if the scope of the patents and other intellectual property protection obtained is not sufficiently broad, our competitors could develop and commercialize products and technologies similar or identical to ours, and our ability to successfully commercialize any products we may develop, and our technologies, may be harmed. 

Our success depends in large part on our proprietary technology and other intellectual property rights. We rely on a combination of patents, copyrights, trademarks and trade secrets, confidentiality provisions, and licensing arrangements to establish and protect our proprietary rights. Our intellectual property, particularly our patents, may not provide us with a significant competitive advantage. If we fail to protect or to enforce our intellectual property rights successfully, our competitive position could suffer, which could harm our results of operations. Our pending patent applications for registration may not be allowed, or others may challenge the validity or scope of our patents. Even if our patent registrations are issued and maintained, these patents may not be of adequate scope or benefit to us or may be held invalid and unenforceable against third parties. We may need to expend significant resources to secure and protect our intellectual property. The loss of intellectual property rights may adversely impact our ability to generate revenues and expand our business.

We may not be successful in our strategic efforts around patent monetization.

Our success depends in part on our ability to effectively utilize our intellectual property. From time to time, we explore opportunities to monetize our patents. On May 6, 2019, we assigned a portfolio of certain patents to Aequitas Technologies LLC to license or otherwise monetize those patents. In the future we may enter into additional alternative patent monetization strategies, including the sale of patents. Our patent monetization strategies may negatively impact our financial condition, revenues, and results of operations. No assurance can be given that we will enter into agreements related to our patent portfolio or that we will be successful in any strategic efforts around patent monetization.

If third parties infringe upon our intellectual property, we may expend significant resources enforcing our rights or suffer competitive injury.

Existing laws, contractual provisions and remedies afford only limited protection for our intellectual property. We may be required to spend significant resources to monitor and police our intellectual property rights. Effective policing of the unauthorized use of our technology or intellectual property is difficult and litigation may be necessary in the future to enforce our intellectual property rights. Intellectual property litigation is not only expensive, but time-consuming, regardless of the merits of any claim, and could divert attention of our management from operating the business. Intellectual property lawsuits are subject to inherent uncertainties due to, among other things, the complexity of the technical issues involved, and we cannot assure you that we will be successful in asserting our intellectual property rights. Attempts may be made to copy or reverse engineer aspects of our technology or to obtain and use information that we regard as proprietary. We may not be able to detect infringement and may lose competitive position in the market as a result. In addition, competitors may design around our technology or develop competing technologies. We cannot assure you that we will be able to protect our proprietary rights against unauthorized third party copying or use. The unauthorized use of our technology or of our proprietary information by competitors could have an adverse effect on our ability to sell our technology.

The laws of certain foreign countries may not provide sufficient protection of our intellectual property rights to the same extent as the laws of the United States, which may make it more difficult for us to protect our intellectual property.

As part of our business strategy, we target customers and relationships with suppliers and OEMs in countries with large populations and propensities for adopting new technologies. However, many of these countries do not address misappropriation of intellectual property nor deter others from developing similar, competing technologies or intellectual property. Effective protection of patents, copyrights, trademarks, trade secrets and other intellectual property may be unavailable or limited in some foreign countries. In particular, the laws of some foreign countries in which we do business may not protect our intellectual property rights to the same extent as the laws of the United States. As a result, we may not be able to effectively prevent competitors in these regions from infringing our intellectual property rights, which could reduce our competitive advantage and ability to compete in those regions and negatively impact our business.

We have an international presence in countries and must manage currency risks. 

A significant portion of our business is conducted in currencies other than the U.S. dollar (the currency in which our consolidated financial statements are reported), primarily the Swedish Krona and, to a lesser extent, the Euro, Japanese Yen, Korean Won, and Taiwan dollar. For the year ended December 31, 2021, our revenues from Asia, North America and Europe were 53%, 39%, and 8%, respectively. We incur a significant portion of our expenses in Swedish Krona, including a significant portion of our research and development expenses and a substantial portion of our general and administrative expenses. As a result, appreciation of the value of the Swedish Krona relative to the other currencies, particularly the U.S. dollar, could adversely affect operating results. We do not currently undertake hedging transactions to cover our currency exposure, but we may choose to hedge a portion of our currency exposure in the future as we deem appropriate.

Security breaches and other disruptions to our information technology infrastructure could interfere with our operations, compromise confidential information, and expose us to liability which could materially adversely impact our business and reputation.

In the normal course of business, we rely on information technology networks and systems to process, transmit, and store electronic information, and to manage or support a variety of business processes and activities. Additionally, we collect and store certain data, including proprietary business information and customer and employee data, and may have access to confidential or personal information in certain of our businesses that is subject to privacy and security laws, regulations, and customer-imposed controls. Despite our cybersecurity measures, our information technology networks and infrastructure may be vulnerable to damage, disruptions, or shutdowns due to attack by hackers or breaches, employee error or malfeasance, power outages, computer viruses, telecommunication or utility failures, systems failures, natural disasters, or other catastrophic events. Any such events could result in legal claims or proceedings, liability or penalties under privacy laws, disruption in operations, and damage to our reputation, which could materially adversely affect our business. 

Third parties that maintain our confidential and proprietary information could experience a cybersecurity incident.

We rely on third parties to provide or maintain some of our information technology and related services. We do not exercise direct control over these systems. Despite the implementation of security measures at third party locations, these services are also vulnerable to security breaches or other disruptions. Despite assurances from third parties to protect this information and, where we believe appropriate, our monitoring of the protections employed by these third parties, there is a risk that the confidentiality of the data held by these third parties on our behalf may be compromised and expose us to liability for any security breach or disruption.

If we are unable to detect material weaknesses in our internal control, our financial reporting and our business may be adversely affected.

Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate the effectiveness of our internal controls over financial reporting as of the end of each fiscal year, and to include a management report assessing the effectiveness of our internal controls over financial reporting in our annual report on Form 10-K for that fiscal year. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud involving a company have been, or will be, detected. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and we cannot assure you that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become ineffective because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected. We cannot assure you that we or our independent registered public accounting firm will not identify a material weakness in our internal controls in the future. A material weakness in our internal controls over financial reporting would require management and our independent registered public accounting firm to consider our internal controls as ineffective. If our internal controls over financial reporting are not considered effective, we may experience a loss of public confidence, which could have an adverse effect on our business and on the market price of our common stock.

Risks Related to Owning Our Stock

Future sales of our common stock by us or our insiders could adversely affect the trading price of our common stock and dilute your investment.

Our long-term success is dependent on us obtaining sufficient capital to fund our operations, develop our touch technology and bring our technology to the worldwide market in order to generate sufficient sales volume to be profitable. We may sell securities in the public or private equity markets if and when conditions are favorable, even if we do not have an immediate need for additional capital at that time. We may also issue additional common stock in future financing transactions or as incentive compensation for our executive management and other key personnel, consultants and advisors.

Sales of substantial amounts of common stock by us or by our insiders or large stockholders, or the perception that such sales could occur, could adversely affect the prevailing market price of our common stock and our ability to raise capital. Issuing equity securities would also be dilutive to the equity interests represented by our then-outstanding shares of common stock. The market price for our common stock could decrease as the market takes into account the dilutive effect of any of these issuances. Furthermore, we may enter into financing transactions at prices that represent a substantial discount to the market price of our common stock. A negative reaction by investors and securities analysts to any discounted sale of our equity securities could result in a decline in the trading price of our common stock.

We currently have fewer than 300 stockholders of record and, therefore, are eligible to terminate the registration of our common stock under the Exchange Act and cease being a U.S. public company with reporting obligations.

Section 12(g)(4) of the Exchange Act allows for the registration of any class of securities to be terminated after a company files a certification with the SEC that the number of holders of record of such class of security is fewer than 300 persons. As of February 24, 2022, there were 50 stockholders of record of our common stock. This does not include the number of shareholders that hold shares in “street name” through banks, brokers and other financial institutions Accordingly, we are eligible to deregister our common stock and suspend our reporting obligations under the Exchange Act. If we were to terminate our registration and suspend our reporting obligations under the Exchange Act, we would no longer be required to comply with U.S. public company disclosure requirements under the Exchange Act, including, but not limited to, annual and quarterly report filings, proxy statement filings and filings by insiders to disclose the acquisition and disposition of our securities.

Our stock price has been volatile, and your investment in our common stock could suffer a decline in value.

There has been significant volatility in the market price and trading volume of equity securities, which is unrelated to the financial performance of the companies issuing the securities. These broad market fluctuations may negatively affect the market price of our common stock. You may not be able to resell your shares at or above the price you pay for those shares due to fluctuations in the market price of our common stock caused by changes in our operating performance or prospects, and other factors.

Some factors that may have a significant effect on our common stock market price include:

A limited number of stockholders, including directors, hold a significant number of shares of our outstanding common stock.

Our two largest stockholders, who both are members of our Board of Directors, hold approximately one-third of the shares of our outstanding voting stock. This concentration of ownership could impact the outcome of stockholder votes, including votes concerning the election of directors, the adoption or amendment of provisions in our certificate of incorporation and our bylaws, and the approval of mergers and other significant corporate transactions. These factors may also have the effect of delaying or preventing a change in our management or our voting control. 

Our certificate of incorporation and bylaws and the Delaware General Corporation Law contain provisions that could delay or prevent a change in control.

Our Board of Directors has the authority to issue up to 1,000,000 shares of preferred stock and to determine the price, rights, preferences and privileges of those shares without any further vote or action by the stockholders. The rights of the holders of common stock will be subject to, and may be materially adversely affected by, the rights of the holders of any preferred stock that may be issued in the future. The issuance of preferred stock could have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock. Furthermore, certain other provisions of our certificate of incorporation and bylaws may have the effect of delaying or preventing changes in control or management, which could adversely affect the market price of our common stock. In addition, we are subject to the provisions of Section 203 of the Delaware General Corporation Law, an anti-takeover law.

If securities analysts do not publish research or if securities analysts or other third parties publish inaccurate or unfavorable research about us, the price of our common stock could decline.

The trading market for our common stock may rely in part on the research and reports that securities analysts and other third parties choose to publish about us. We do not control these analysts or other third parties. The price of our common stock could be negatively impacted by insufficient analyst coverage or if one or more analysts or other third parties publish inaccurate or unfavorable research about us. 

None.

As of December 31, 2021, we leased office facilities of approximately 6,700 square feet for our corporate headquarters in Stockholm. In addition, our majority subsidiary Pronode Technologies AB leases a workshop of approximately 9,000 square feet in Kungsbacka, Sweden.

We believe our facilities are adequate and suitable for our current needs and that suitable additional or alternative space will be available to accommodate our operations if needed.

We are not a party to any pending legal proceedings. From time to time, we may become subject to legal proceedings, claims, and litigation arising in the ordinary course of business, including, but not limited to, employee, customer and vendor disputes.

Not applicable.

PART II

Market Information

Our common stock is quoted on the Nasdaq Stock Market under the symbol “NEON.”

Holders

As of February 24, 2022, there were 50 stockholders of record of our common stock. This does not include the number of stockholders that hold shares in “street name” through banks, brokers and other financial institutions.

Securities Authorized for Issuance Under Equity Compensation Plans

See Part III, Item 12. “Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters” for information relating to our equity compensation plans.

Recent Sale of Unregistered Securities and Use of Proceeds

None.

Purchases of Equity Securities By the Issuer and Affiliated Purchasers

None.

The following discussion and analysis should be read in conjunction with our consolidated financial statements and the related notes thereto included elsewhere in this Annual Report.

Overview

Our company provides advanced optical sensing solutions for contactless touch, touch, and gesture sensing. We also provide software solutions for scene analysis that feature advanced machine learning algorithms to detect and track persons and objects in video streams for cameras and other types of imagers. We base our contactless touch, touch, and gesture sensing products and solutions using our zForce technology platform and our scene analysis solutions on our MultiSensing technology platform. We market and sell our solutions to customers in many different markets and segments including, but not limited to, office equipment, automotive, industrial automation, medical, military and avionics.

In 2010, we began licensing to Original Equipment Manufacturers (“OEMs”) and Tier 1 suppliers who embed our technology into products they develop, manufacture, and sell. Since 2010, our licensing customers have sold approximately 85 million devices that use our technology. In October 2017, we augmented our licensing business and began manufacturing and shipping sensor modules that incorporate our technology. We sell these embedded sensors modules to OEMs and systems integrators for use in their products.

As of December 31, 2021 we had 34 valid technology license agreements with global OEMs and Tier 1 suppliers. As of December 31, 2020, that number was 42. During the year ended December 31, 2021, we had 11 customers using our touch technology in products that were being shipped to their customers. The majority of our license fees earned in 2021 and 2020 were from customer shipments of printers.

As of December 31, 2021, we had entered into 11 agreements with value added resellers (“VARs”) for integration of our sensor modules in the products they offer to global OEMs, ODMs and systems integrators. In addition to this, we distribute our embedded sensor modules through Digi-Key Corporation, Serial Microelectronics HK Ltd, and Nexty Electronics Corporation. During 2021, our three distributors sold and shipped 8,613 sensor modules and related development kits. We anticipate our future revenue will be generated by a combination of royalties from our existing and new license customers plus sales of our sensor modules.

During 2021 and 2020 we continued to focus our efforts on maintaining our current licensing customers and achieving design wins for new products both with current and future customers. We made investments enhancing the design and improving the production yield of our TSMs and improving the related firmware and configuration tools software platforms. We also made investments to expand our partner networks for sales and distribution of TSMs. We intend to continue expanding our TSM product offerings in 2022 and beyond, including new TSM variants and new sensor products for delivery to our key markets. We expect that over time the sales of TSMs and other sensor products may constitute the majority of our revenue.

Critical Accounting Policies and Estimates

Our consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”) and include the accounts of Neonode Inc. and its wholly owned subsidiaries, as well as Pronode Technologies AB (Sweden), a 51% majority owned subsidiary of Neonode Technologies AB, one of our wholly owned subsidiaries. The non-controlling interests are reported below net loss including non-controlling interests under the heading “Net loss attributable to non-controlling interests” in the consolidated statements of operations, below comprehensive loss under the heading “Comprehensive loss attributable to non-controlling interests” in the consolidated statements of comprehensive loss, and shown as a separate component of stockholders’ equity in the consolidated balance sheets. See “Non-controlling Interests” below for further discussion. All inter-company accounts and transactions have been eliminated in consolidation.

The accounting policies affecting our financial condition and results of operations are more fully described in Note 2 to our consolidated financial statements. Certain of our accounting policies require the application of judgment by management in selecting appropriate assumptions for calculating financial estimates, which inherently contain some degree of uncertainty. Management bases its estimates on historical experience and various other assumptions that are believed to be reasonable under the circumstances. The historical experience and assumptions form the basis for making judgments about the reported carrying values of assets and liabilities and the reported amounts of revenue and expenses that may not be readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. We believe the following are critical accounting policies and related judgments and estimates used in the preparation of our consolidated financial statements.

Estimates

The preparation of financial statements in conformity with U.S. GAAP requires making estimates and judgments that affect, at the date of the financial statements, the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities and the reported amounts of revenue and expenses. Actual results could differ from these estimates and judgments.

Significant estimates and judgments include, but are not limited to: for revenue recognition, determining the nature and timing of satisfaction of performance obligations, the standalone selling price of performance obligations, and transaction prices and assessing transfer of control; measuring variable consideration and other obligations such as product returns and refunds, and product warranties; provisions for uncollectible receivables; determining the net realizable value of inventory; recoverability of capitalized project costs and long-lived asset; for leases, determining whether a contract contains a lease, allocating consideration between lease and non-lease components, determining incremental borrowing rates, and identifying reassessment events, such as modifications; the valuation allowance related to our deferred tax assets; and the fair value of options issued for stock-based compensation. 

Revenue Recognition

We recognize revenue when control of products is transferred to our customers, and when services are completed and accepted by our customers; the amount of revenue we recognize reflects the consideration we expect to receive for those products or services. Our contracts with customers may include combinations of products and services (e.g., a contract that includes products and related engineering services). We structure our contracts such that distinct performance obligations, such as product sales or license fees, and related engineering services, are clearly defined in each contract.

License fees and sales of our AirBars and TSMs are on a per-unit basis are on a per-unit basis. Therefore, we generally satisfy performance obligations as units are shipped to our customers. Non-recurring engineering service performance obligations are satisfied as work is performed and accepted by our customers.

We recognize revenue net of allowances for returns and any taxes collected from customers, which are subsequently remitted to governmental authorities. We treat all product shipping and handling charges (regardless of when they occur) as activities to fulfill the promise to transfer goods. Therefore, we treat all shipping and handling charges as expenses.

License fees

We earn revenue from licensing our internally developed intellectual property (“IP”). We enter into IP licensing agreements that generally provide licensees the right to incorporate our IP components into their products, with terms and conditions that vary by licensee. Fees under these agreements may include license fees relating to our IP, and royalties payable to us following the distribution by our licensees of products incorporating the licensed technology. The license for our IP has standalone value and can be used by the licensee without maintenance and support.

For technology license arrangements that do not require significant modification or customization of the underlying technology, we recognize technology license revenue when the license is made available to the customer and the customer has a right to use that license. At the end of each reporting period, we record unbilled license fees, using prior royalty revenue data by customer to make estimates of those royalties.

Explicit return rights are not offered to customers. There have been no returns through December 31, 2021.

Product sales

We earn revenue from sales of TSM hardware products to our OEM, ODM and Tier 1 supplier customers, who embed our hardware into their products, and from sales of branded consumer products that incorporate our TSMs that are sold through distributors or directly to end users. These distributors are generally given business terms that allow them to return unsold inventory, receive credits for changes in selling prices, and participate in various cooperative marketing programs. Our sales agreements generally provide customers with limited rights of return and warranty provisions.

The timing of revenue recognition related to AirBar modules depends upon how each sale is transacted - either point-of-sale or through distributors. We recognize revenue for AirBar modules sold point-of-sale (online sales and other direct sales to customers) when we provide the promised product to the customer.

Because we use distributors to provide AirBar TSMs to our customers, we must analyze the terms of our distributor agreements to determine when control passes from us to our distributors. For sales of AirBar and TSMs sold through distributors, we recognize revenues when our distributors obtain control over our products. Control passes to our distributors when we have a present right to payment for products sold to the distributors, the distributors have legal title to and physical possession of products purchased from us, and the distributors have significant risks and rewards of ownership of products purchased.

Distributors participate in various cooperative marketing and other incentive programs, and we maintain estimated accruals and allowances for these programs. If actual credits received by distributors under these programs were to deviate significantly from our estimates, which are based on historical experience, our revenue could be adversely affected.

Under U.S. GAAP, companies may make reasonable aggregations and approximations of returns data to accurately estimate returns. Our AirBar and TSM returns and warranty experience to date has enabled us to make reasonable returns estimates, which are supported by the fact that our product sales involve homogenous transactions. The reserve for future sales returns is recorded as a reduction of our accounts receivable and revenue and was $69,000 and $78,000 as of December 31, 2021 and 2020, respectively. The warranty reserve is recorded as an accrued expense and cost of sales and was $36,000 and $25,000 as of December 31, 2021 and 2020, respectively. If the actual future returns were to deviate from the historical data on which the reserve had been established, our revenue could be adversely affected.

Non-Recurring Engineering

For technology license or TSM contracts that require modification or customization of the underlying technology to adapt the technology to customer use, we determine whether the technology license or TSM, and required engineering consulting services represent separate performance obligations. We perform our analysis on a contract-by-contract basis. If there are separate performance obligations, we determine the standalone selling price (“SSP”) of each separate performance obligation to properly recognize revenue as each performance obligation is satisfied. We provide engineering consulting services to our customers under a signed Statement of Work (“SOW”). Deliverables and payment terms are specified in each SOW. We generally charge an hourly rate for engineering services, and we recognize revenue as engineering services specified in contracts are completed and accepted by our customers. Any upfront payments we receive for future non-recurring engineering are recorded as unearned revenue until that revenue is earned.

We believe that recognizing revenue from non-recurring engineering as progress towards completion of engineering services and customer acceptance of those services occurs best reflects the economics of those transactions, because engineering services as tracked in our systems correspond directly with the value to our customers of our performance completed to date. Hours performed for each engineering project are tracked and reflect progress made on each project and are charged at a consistent hourly rate.

Revenues from non-recurring engineering contracts that are short-term in nature are recorded when those services are complete and accepted by customers.

Revenues from non-recurring engineering contracts with substantive defined deliverables for which payment terms in the SOW are commensurate with the efforts required to produce such deliverables are recognized as they are completed and accepted by customers.

Estimated losses on all SOW projects are recognized in full as soon as they become evident. During the year ended December 31, 2021, we recorded no losses and during the year ended December 31, 2020, we recorded $47,000 of losses.

Accounts Receivable and Allowance for Doubtful Accounts  

Our accounts receivable is stated at net realizable value. Our policy is to maintain allowances for estimated losses resulting from the inability of our customers to make required payments.

Inventory

Our inventory consists primarily of components that will be used in the manufacturing of our TSMs. We classify inventory for reporting purposes as raw materials, work-in-process, and finished goods.

Inventory is stated at the lower of cost or net realizable value, using the first-in, first-out (“FIFO”) valuation method. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. Any adjustments to reduce the cost of inventories to their net realizable value are recognized in earnings in the current period.

Due to the low sell-through of our AirBar products, management has decided to fully reserve work-in-process for AirBar components, as well as AirBar related raw materials. Management has further decided to reserve for a portion of AirBar finished goods, depending on type of AirBar and in which location it is stored. The AirBar inventory reserve was $0.8 million and $0.9 million as of December 31, 2021 and 2020, respectively.

Management decided to reserve for TSM inventory related to a quality issue in production. The TSM inventory reserve was $0.2 million as of December 31, 2021. 

Projects in Process

Projects in process consist of costs incurred during the completion of various projects for certain customers. These costs are primarily comprised of direct engineering labor costs and project-specific equipment costs. These costs are capitalized on our balance sheet as an asset and deferred until revenue for each project is recognized in accordance with our revenue recognition policy. There were no costs capitalized in projects in process as of December 31, 2021 and 2020, respectively.

Property and Equipment

Property and equipment are stated at cost, net of accumulated depreciation and amortization. Depreciation and amortization are computed using the straight-line method based upon estimated useful lives of the assets as follows:

Equipment purchased under a finance lease is depreciated over the term of the lease, if that lease term is shorter than the estimated useful life.

Upon retirement or sale of property and equipment, cost and accumulated depreciation and amortization are removed from the accounts and any gains or losses are reflected in the consolidated statement of operations. Maintenance and repairs are charged to expense as incurred.

Long-Lived Assets

We assess any impairment by estimating the future cash flows from the associated asset in accordance with relevant accounting guidance. If the estimated undiscounted future cash flow related to these assets decreases or the useful life is shorter than originally estimated, we may incur charges for impairment of these assets. As of December 31, 2021, we believe there was no impairment of our long-lived assets. There can be no assurance, however, that market conditions will not change or sufficient demand for our products and services will continue, which could result in impairment of long-lived assets in the future.

Research and Development

Research and development (“R&D”) costs are expensed as incurred. R&D costs consist mainly of personnel related costs in addition to some external consultancy costs such as testing, certifying and measurements.

Stock-Based Compensation Expense

We measure the cost of employee services received in exchange for an award of equity instruments, including share options, based on the estimated fair value of the award on the grant date, and recognize the value as compensation expense over the period the employee is required to provide services in exchange for the award, usually the vesting period, net of estimated forfeitures.

We account for equity instruments issued to non-employees at their estimated fair value.

When determining stock-based compensation expense involving options and warrants, we determine the estimated fair value of options and warrants using the Black-Scholes option pricing model.

Non-controlling Interests   

We recognize any non-controlling interest, also known as a minority interest, as a separate line item in equity in the consolidated financial statements. A non-controlling interest represents the portion of equity ownership in a less-than-wholly owned subsidiary not attributable to us. Generally, any interest that represents less than 50% of the outstanding voting shares is deemed to be a non-controlling interest; however, there are other factors, such as decision-making rights, that are considered as well. We include the amount of net income (loss) attributable to non-controlling interests in consolidated net income (loss) on the face of the consolidated statements of operations.

We provide either in the consolidated statement of stockholders’ equity, if presented, or in the notes to consolidated financial statements, a reconciliation at the beginning and the end of the period of the carrying amount of total equity (net assets), equity (net assets) attributable to the parent, and equity (net assets) attributable to the non-controlling interest that separately discloses:

Foreign Currency Translation and Transaction Gains and Losses

The functional currency of our foreign subsidiaries is the applicable local currency, the Swedish Krona, the Japanese Yen, the South Korean Won and the Taiwan Dollar. The translation from Swedish Krona, Japanese Yen, South Korean Won or the Taiwan Dollar to U.S. Dollars is performed for balance sheet accounts using current exchange rates in effect at the balance sheet date and for income statement accounts using a weighted average exchange rate during the period. Gains or (losses) resulting from translation are included as a separate component of accumulated other comprehensive income (loss). Gains or (losses) resulting from foreign currency transactions are included in general and administrative expenses in the accompanying consolidated statements of operations and were $(66,000) and $(252,000) during the years ended December 31, 2021 and 2020, respectively. Foreign currency translation gains (losses) were $(4,000) and $235,000 during the years ended December 31, 2021 and 2020, respectively.

Net Loss per Share

Net loss per share amounts have been computed based on the weighted-average number of shares of common stock outstanding during the years ended December 31, 2021 and 2020.

Net loss per share, assuming dilution amounts from common stock equivalents, is computed based on the weighted-average number of shares of common stock and potential common stock equivalents outstanding during the period. The weighted-average number of shares of common stock and potential common stock equivalents used in computing the net loss per share for years ended December 31, 2021 and 2020 exclude the potential common stock equivalents, as the effect would be anti-dilutive.

Other Comprehensive Income (Loss)

Our other comprehensive income (loss) includes foreign currency translation gains and losses. The cumulative amount of translation gains and losses are reflected as a separate component of stockholders’ equity in the consolidated balance sheets as accumulated other comprehensive loss.

Cash Flow Information

Cash flows in foreign currencies have been converted to U.S. Dollars at an approximate weighted-average exchange rate for the respective reporting periods. The weighted-average exchange rates for the consolidated statements of operations were as follows:

Exchange rates for the consolidated balance sheets were as follows: 

Deferred Revenues

Deferred revenues consist primarily of prepayments for license fees, and other products or services that we have been paid in advance. We earn this revenue when we transfer control of the product or service. Deferred revenues may also include upfront payments for consulting services to be performed in the future, such as non-recurring engineering services.

We defer license fees until we have met all accounting requirements for revenue recognition, which is when a license is made available to a customer and that customer has a right to use the license. Engineering development fee revenues are deferred until engineering services have been completed and accepted by our customers. We defer sensor modules revenues until distributors sell the products to their end customers.

The following table presents our deferred revenues by source (in thousands);

New Accounting Pronouncements 

In September 2016, the FASB issued ASU No. 2016-13, Financial Instruments-Credit Losses (Topic 326)-Measurement of Credit Losses on Financial Instruments, (“ASU 2016-13”), supplemented by subsequent accounting standards updates. The new standard requires entities to measure all expected credit losses for financial assets held at the reporting date based on historical experience, current conditions and reasonable and supportable forecasts. ASU 2016-13, as amended, is scheduled to become effective for fiscal years beginning after December 15, 2023, with early adoption permitted. In the future, we will evaluate the impact that ASU 2016-13, as amended, will have on our consolidated financial statements, specifically regarding our trade receivables; however, we do not expect any significant impact from implementation of the new standard.

Results of Operations

A summary of our financial results for the years ended December 31, 2021 and 2020 is as follows (in thousands, except percentages):

Revenues

All of our sales for the years ended December 31, 2021 and 2020 were to customers located in the United States, Europe and Asia.

The decrease in total gross revenues by 2.5% for the year ended December 31, 2021 as compared to 2020 was primarily caused by lower NRE revenue, offset by higher license fees and product sales.

The following tables present the net revenues distribution by geographical area and revenue stream for the years ended December 31, 2021 and 2020 (dollars in thousands):

The following table presents disaggregated revenues by revenue stream for the years ended December 31, 2021 and 2020 (dollars in thousands):

License fees increased by 3.7% in 2021 as compared to 2020. License revenues in the first half of 2020 were depressed by the general COVID-19 driven economic slow-down. During the second half of 2020 our license revenues started to re-bound and this trend continued during the first and second quarters of 2021. For the third quarter of 2021, revenues decreased primarily due to overall global supply-chain constraints and more specifically semiconductor component shortages within the printer and automotive markets combined with renewed pandemic-driven lock-downs in our key markets. For the fourth quarter of 2021, license revenues increased by 60% over the third quarter due to a more balanced supply/demand equation in the semiconductor markets, which allowed increased product shipments by our printer and automotive customers.

Revenues from product sales were $1.0 million, the same as for 2020. In the first half of 2021 we saw an increase in product sales. In the second half of 2021, product sales were negatively impacted when COVID-19 driven lock-downs were implemented in our key markets. Our elevator and kiosks customers in Asia have been first adopters for our contactless touch technology and as expected, most of our initial TSM sales are related to retrofit solutions. New customer equipment launches have much longer product development and production cycles that can take 4 to 18 months or longer.

Revenues from NRE services decreased 77.4% in 2021 as compared to 2020. In 2021, NRE revenues related to projects within product sales. Revenues from NRE is associated with customer custom development projects and typically fluctuates from quarter to quarter and year to year and is entirely dependent on specific customer driven development activities. We expect to continue to earn NRE fees in 2022 and future years.

Gross Margin

Our total gross margin was 83.6% in 2021 compared to 82.0% in 2020. Gross margin related to product sales was 3.5% in 2021 compared to 15.6% in 2020. In 2021 and 2020 product sales gross margin was impacted by one-time adjustments related to AirBar and TSMs stock write-downs.

Our cost of revenues includes the direct cost of production of certain customer prototypes, costs of engineering personnel, engineering consultants to complete the engineering design contracts and cost of goods sold for sensor modules includes fully burdened manufacturing costs, outsourced final assembly costs, and component costs of sensor modules.

Research and Development

Product R&D expenses for 2021 were 61% of total revenue compared to 69% in 2020. R&D in 2021 decreased 14.3% compared to 2020 primarily due to the move of administrative costs related to production from R&D to general and administrative. There were 25 employees and two consultants in our R&D department as of December 31, 2021 compared to 25 employees and two consultants as of December 31, 2020.

Our R&D groups are primarily tasked with developing technology and software platforms to support our TSMs and our customer integration activities for both our sensor hardware and license agreements.

Sales and Marketing

Sales and marketing expenses for 2021 were 49% of total revenue compared to 42% in 2020. Sales and marketing expenses in 2021 increased 12% compared to 2020 primarily due to higher staff expenses in 2021. We had eight employees and six consultants in our sales and marketing department as of December 31, 2021 compared to six employees and seven consultants as of December 31, 2020. There is approximately $50,000 of stock-based compensation expense included in sales and marketing expenses for the year ended December 31, 2021 compared to $32,000 for the year ended December 31, 2020.

Our sales activities focus on OEM, ODM and Tier 1 customers, directly or through VARs, who license our technology or purchase and embed our touch sensor modules into their products.

General and Administrative

General and administrative (“G&A”) expenses were 96% of revenue in 2021 compared to 74% in 2020. Total G&A expenses in 2021 increased 25.2% from 2020 and was primarily due to the move of administrative costs related to production from R&D to G&A. As of December 31, 2021, we had seven full-time employees and three consultants in our G&A department fulfilling management, HR and accounting responsibilities compared to eight full-time employees and no consultants as of December 31, 2020. There is approximately $107,000 of non-cash stock-based compensation included in G&A expenses for the year ended December 31, 2021 compared to $42,000 for the year ended December 31, 2020.

Interest Expense

Interest expense for the year ended December 31, 2021 was $15,000 compared to $27,000 for the year ended December 31, 2020. The interest expense for both 2021 and 2020 was primarily related to finance leases.

Foreign Currency Translation and Transaction Gains and Losses

The functional currency of our foreign subsidiaries is the applicable local currency, the Swedish Krona, the Japanese Yen, the South Korean Won and the Taiwan Dollar. The translation from Swedish Krona, Japanese Yen, South Korean Won or the Taiwan Dollar to U.S. Dollars is performed for balance sheet accounts using current exchange rates in effect at the balance sheet date and for income statement accounts using a weighted average exchange rate during the period. Gains or (losses) resulting from translation are included as a separate component of accumulated other comprehensive income (loss). Gains or (losses) resulting from foreign currency transactions are included in general and administrative expenses in the accompanying consolidated statements of operations were $(66,000) and $(252,000) during the years ended December 31, 2021 and 2020, respectively. Foreign currency translation gains (losses) were $(4,000) and $235,000 during the years ended December 31, 2021 and 2020, respectively

Income Taxes

Our effective tax rate was (2)% for the year ended December 31, 2021 and (1)% for the year ended December 31, 2020. We recorded valuation allowances in 2021 and 2020 for deferred tax assets related to net operating losses due to the uncertainty of realization.

Net Loss

As a result of the factors discussed above, we recorded a net loss of $6.5 million for the year ended December 31, 2021, compared to a net loss of $5.6 million for the year ended December 31, 2020.

Contractual Obligation

We previously agreed to secure the value of inventory purchased by one of our AirBars manufacturing partners. At December 31, 2021, the guaranteed amount was decreased from $100,000 to $0. We do not have any other transactions, arrangements, or other relationships with unconsolidated entities that are reasonably likely to affect our liquidity or capital resources other than the operating leases incurred in the normal course of business.

We have no special purpose or limited purpose entities that provide off-balance sheet financing, liquidity, or market or credit risk support. We do not engage in leasing, hedging, research and development services, or other relationships that expose us to liability that is not reflected on the face of the consolidated financial statements.

Operating Leases

We did not renew our lease for the office space located at 2880 Zanker Road, San Jose, California 95134 in August 2020 and Neonode Inc. now operates solely through a virtual office in California.

On December 1, 2020, Neonode Technologies AB entered into a lease for 6,684 square feet of office space located at Karlavägen 100, Stockholm, Sweden. The lease agreement is valid through November 2022. It is extended on a yearly basis unless written notice is provided nine months prior to the expiration date.

On December 1, 2015, Pronode Technologies AB entered into a lease agreement for 9,040 square feet of workshop located at Faktorvägen 17, Kungsbacka, Sweden. The lease may be terminated with nine months’ written notice before the termination date. We have three years remaining under this lease.

In January 2015, our subsidiary Neonode Korea Ltd. entered into a lease agreement located at B-1807, Daesung D-Polis. 543-1, Seoul, South Korea. The lease was terminated on December 18, 2020 and we now operate solely through a virtual office in South Korea.

On September 1, 2019 we entered into a lease of office space located at NishiShinjuku Takagi Building, 1203 NishiShinjuku, Shinjukuku, Tokyo, Japan. The lease is valid through August 31, 2021 and is extended on a yearly basis unless written notice is provided three months prior to the expiration date.

For the years ended December 31, 2021 and 2020, we recorded approximately $661,000 and $585,000, respectively, for rent expense. 

Equipment Subject to Finance Leases

In April 2014, we entered into a lease for certain specialized milling equipment. Under the terms of the lease agreement we are obligated to purchase the equipment at the end of the original six-year lease term for 10% of the original purchase price of the equipment. In accordance with relevant accounting guidance the lease is classified as a finance lease. The lease payments and depreciation period began on July 1, 2014 when the equipment went into service. On July 1, 2020 the lease contract was extended for one year. The implicit interest rate of the extended lease period is 9.85% per annum.

Between the second and fourth quarters of 2016, we entered into six leases for component production equipment. Under the terms of five of the lease agreements we are obligated to purchase the equipment at the end of the original 3-5 year lease terms for 5-10% of the original purchase price of the equipment. In accordance with relevant accounting guidance the leases are classified as finance leases. The lease payments and depreciation periods began between June and November 2016 when the equipment went into service. The implicit interest rate of the leases is currently approximately 3% per annum. One of the leases is a hire-purchase agreement where the equipment is required to be paid off after five years. In accordance with relevant accounting guidance the lease is classified as a finance lease. The lease payments and depreciation period began on July 1, 2016 when the equipment went into service. The implicit interest rate of the lease is currently approximately 3% per annum.

In 2017, we entered into a lease for component production equipment. Under the terms of the lease agreement the lease will be renewed within one year of the end of the original four-year lease term. In accordance with relevant accounting guidance the lease is classified as a finance lease. The lease payments and depreciation periods began in May 2017 when the equipment went into service. The implicit interest rate of the lease is currently approximately 1.5% per annum.

In 2018, we entered into a lease for component production equipment. Under the terms of the agreement, the lease will be renewed within one year of the original four-year lease term. In accordance with relevant accounting guidance the lease is classified as a finance lease. The lease payments and depreciation periods began in August 2018 when the equipment went into service. The implicit interest rate of the lease is currently approximately 1.5% per annum.

During 2021 we terminated one finance lease by purchasing the related equipment and extended one finance lease for an additional two years.

Non-Recurring Engineering Development Costs

On April 25, 2013, we entered into an Analog Device Development Agreement (the “NN1002 Agreement”) with Texas Instruments (“TI”), with an effective date of December 6, 2012, pursuant to which TI agreed to integrate our intellectual property into an ASIC. Under the terms of the NN1002 Agreement, we agreed to pay TI $500,000 of non-recurring engineering costs at the rate of $0.25 per ASIC for each of the first two million ASICs sold. As of December 31, 2021, we had made no payments to TI under the NN1002 Agreement.  

Liquidity and Capital Resources

Our liquidity is dependent on many factors, including sales volume, operating profit and the efficiency of asset use and turnover. Our future liquidity will be affected by, among other things:

As of December 31, 2021, we had cash of $17.4 million, as compared to $10.5 million as of December 31, 2020.

Working capital (current assets less current liabilities) was $19.1 million as of December 31, 2020, compared to working capital of $10.4 million as of December 31, 2020.

Net cash used in operating activities for the year ended December 31, 2021 was $7.7 million and was primarily the result of a net loss including noncontrolling interests of approximately $7.3 million. Cash used to fund net losses is offset by approximately $1.3 million in non-cash operating expenses, mainly comprised of depreciation, amortization and stock-based compensations.

Accounts receivable and unbilled revenues decreased by approximately $434,000 as of December 31, 2021 compared to December 31, 2020.

Inventory increased by approximately $1,440,000 as of December 31, 2021 compared to December 31, 2020.

Accounts payable and accrued expenses decreased approximately $406,000 as of December 31, 2021 compared to December 31, 2020. 

Net cash used in operating activities for the year ended December 31, 2020 of $5.8 million was primarily the result of a net loss including noncontrolling interests of approximately $6.3 million. Cash used to fund net losses is offset by approximately $1.3 million in non-cash operating expenses, mainly comprised of depreciation, amortization and stock-based compensations.

Net cash provided by financing activities for the year ended December 31, 2021 was $14.6 million as was mainly the result of issuance of common stock, partly offset by principal payments on finance leases.

Net cash provided by financing activities for the year ended December 31, 2020 was $13.6 million as was mainly the result of issuance of common stock, partly offset by principal payments on finance leases.

For the years ended December 31, 2021 and 2020, we purchased $67,000 and $60,000, respectively, of fixed assets, consisting primarily of engineering equipment.

Registered Direct Offering

On October 21, 2021, we entered into a placement agency agreement with Pareto Securities Inc. and Pareto Securities AB pursuant to which we sold to certain Swedish and other European investors an aggregate of 1,808,000 shares of our common stock at a price of $7.75 per share in a registered direct offering that closed on October 26, 2021 (the “Offering”). We received net proceeds of approximately $13.1 million from the Offering after deducting placement agent fees and offering expenses.

At-the-Market Offering Program

On May 10, 2021, we entered into an At Market Issuance Sales Agreement (the “Sales Agreement”) with B. Riley Securities, Inc. (“B. Riley Securities”) with respect to an “at the market” offering program (the “ATM Facility”), under which we may, from time to time, in our sole discretion, issue and sell through B. Riley Securities, acting as sales agent, up to $25 million of shares of our common stock.

Pursuant to the Sale Agreement, we may sell the shares through B. Riley Securities by any method permitted that is deemed an “at the market” offering as defined in Rule 415 under the Securities Act of 1933, as amended. B. Riley Securities will use commercially reasonable efforts consistent with its normal trading and sales practices to sell the shares from time to time, based upon instructions from us (including any price or size limits or other customary parameters or conditions we may impose). We will pay B. Riley Securities a commission of 3.0% of the gross sales price per share sold under the Sales Agreement.

We are not obligated to sell any shares under the Sale Agreement. The offering of shares pursuant to the Sale Agreement will terminate upon the earlier to occur of (i) the issuance and sale, through B. Riley Securities, of all of the shares subject to the Sales Agreement and (ii) termination of the Sale Agreement in accordance with its terms.

During the twelve months ended December 31, 2021, we sold an aggregate of 235,722 shares of common stock under the ATM Facility, resulting in net proceeds of approximately $1,984,000 after payment of commissions to B. Riley Securities and other expenses of $66,000.

Future Sources of Liquidity

In the future, we may require sources of capital in addition to cash on hand to continue operations and to implement our strategy. If our operations do not become cash flow positive, we may be forced to seek equity investments or debt arrangements. Historically, we have been able to access the capital markets through sales of common stock and warrants to generate liquidity. Our management believes it could raise capital through public or private offerings if needed to provide us with sufficient liquidity.

No assurances can be given, however, that we will be successful in obtaining such additional financing on reasonable terms, or at all. If adequate funds are not available on acceptable terms, or at all, we may be unable to adequately fund our business plans and it could have a negative effect on our business, results of operations and financial condition. In addition, no assurance can be given that stockholders will approve an increase in the number of our authorized shares of common stock if needed. The issuance of equity securities or securities convertible into equity could dilute the value of shares of our common stock and cause the market price to fall, and the issuance of debt securities could impose restrictive covenants that could impair our ability to engage in certain business transactions.

The functional currency of our foreign subsidiaries is the applicable local currency, the Swedish Krona, the Japanese Yen, the South Korean Won and the Taiwan Dollar. They are subject to foreign currency exchange rate risk. Any increase or decrease in the exchange rate of the U.S. Dollar compared to the Swedish Krona, Japanese Yen, South Korean Won or Taiwan Dollar will impact our future operating results.

Not applicable. 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

Neonode Inc.

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of Neonode Inc. (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2021 and 2020, the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows for each of the two years in the period ended December 31, 2021, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Accounting for Licensing Revenues

Critical Audit Matter Description

As described further in Note 2 to the consolidated financial statements, the Company earns revenue from licensing its internally developed intellectual property (“IP”) by entering into IP licensing agreements that generally provide licensees the right to incorporate IP components in their products, with terms and conditions that vary by licensee. Fees under these agreements may include license fees relating to the Company’s IP, and royalties payable to the Company following the distribution by the licensees of products incorporating the licensed technology. At the end of each reporting period, the Company records unbilled license revenues, using prior royalty revenue data by customer to make estimates of those royalties.

Auditing management’s evaluation of unbilled license revenues was challenging due to the lack of objectively verifiable evidence used in the estimation process. As a result, there is a high degree of auditor judgment involved in performing procedures on the Company’s estimates.

How the Critical Audit Matter Was Addressed in the Audit

The primary procedures we performed to address this critical audit matter included assessing the accuracy of royalty estimates made in prior reporting periods as compared to the actual royalties subsequently determined for all significant licensing customers and inquiring of management as to the reasons for any significant differences between actual and estimated royalties, determining that the Company has had no significant revenue reversals as a result of these past differences, and inquiring as to the basis of the current period estimates of royalties, including the Company’s considerations of the overall economic environment, past royalty experience and the specific circumstances and trends of the license customers’ royalty-based business based on the Company’s knowledge of and discussions with customers’ representatives.

We have served as the Company’s auditor since 2009.

Irvine, California

March 10, 2022

NEONODE INC.

CONSOLIDATED BALANCE SHEETS

(In thousands, except share and per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

NEONODE INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

NEONODE INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS

(In thousands)

The accompanying notes are an integral part of these consolidated financial statements.

NEONODE INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In thousands, except for Preferred Stock Shares Issued¹)