NETLIST INC - Annual Report: 2011 (Form 10-K)

Use these links to rapidly review the document
TABLE OF CONTENTS
PART IV
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K

Commission file number 001-33170

NETLIST, INC.
(Exact name of registrant as specified in its charter)

51 Discovery, Suite 150
Irvine, CA 92618
(Address of principal executive offices) (Zip Code)

(949) 435-0025
(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None
(Title of class)

          Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o    No ý

          Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o    No ý

          Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

          Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o    No o

          Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

          Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

          Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o    No ý

          The aggregate market value of the registrant's common stock held by non-affiliates, based on the closing price of the registrant's common stock as reported on The NASDAQ Global Market on July 3, 2010, the last business day of the registrant's most recently completed second fiscal quarter, was approximately $50.8 million. For purposes of this calculation, it has been assumed that all shares of the registrant's common stock held by directors, executive officers and shareholders beneficially owning five percent or more of the registrant's common stock are held by affiliates. The treatment of these persons as affiliates for purposes of this calculation is not conclusive as to whether such persons are, in fact, affiliates of the registrant.

          The number of shares outstanding of the registrant's common stock, as of the latest practicable date:

Common Stock, par value $0.001 per share

25,284,303 shares outstanding at February 15, 2011

DOCUMENTS INCORPORATED BY REFERENCE

          Portions of the definitive Proxy Statement for the registrant's Annual Meeting of Stockholders for 2011 have been incorporated by reference into Part III of this Annual Report on Form 10-K.

Table of Contents

TABLE OF CONTENTS

        Unless the context otherwise requires, references to the "Company," "Netlist," "we," "us" or "our" refer to Netlist, Inc. and its subsidiaries.

        The registered trademarks of Netlist, Inc. and its subsidiaries include: HyperCloud™ and NVvault™. Other trademarks used in this Report are the property of their respective owners.

Table of Contents

        This Annual Report on Form 10-K includes "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements relate to expectations concerning matters that are not historical facts, and are generally identified by words such as "believe", "expect", "anticipate", "estimate", "intend", "strategy", "may", "will likely" and similar words or phrases. A forward-looking statement is neither a prediction nor a guarantee of future events or circumstances, and our actual results could differ materially and adversely from those expressed in any forward-looking statement. These forward-looking statements are all based on currently available market, operating, financial and competitive information and assumptions and are subject to various risks and uncertainties that are difficult to predict. Important information regarding factors that could cause actual results to differ materially from such expectations is disclosed in this Report, including, without limitation, information under the caption "Risk Factors". These risks and uncertainties include, but are not limited to continuing development, qualification and volume production of NVvault™ and HyperCloud™ the rapidly-changing nature of technology; risks associated with intellectual property, including the costs and unpredictability of litigation over infringement of our property and the possibility of our patents being reexamined by the United States ("U.S.")Patent and Trademark Office ("USPTO"); volatility in the pricing of DRAM ICs and NAND; changes in and uncertainty of customer acceptance of, and demand for, our existing products and products under development, including uncertainty of and/or delays in product orders and product qualifications; delays in our and our customers' product releases and development; introductions of new products by competitors; changes in end-user demand for technology solutions; our ability to attract and retain skilled personnel; our reliance on suppliers of critical components and vendors in the supply chain; fluctuations in the market price of critical components; evolving industry standards; and the political and regulatory environment in the People's Republic of China ("PRC"). Except as required by law, we do not undertake any obligation to revise or update any forward-looking statements for any reason.

PART I

Item 1.    Business

Overview

        We design, manufacture and sell high-performance, intelligent memory subsystems for datacenter server and high-performance computing and communications markets. Our memory subsystems consist of combinations of dynamic random access memory integrated circuits ("DRAM ICs" or "DRAM"), NAND flash memory ("NAND"), application-specific integrated circuits ("ASICs") and other components assembled on printed circuit boards ("PCBs"). We primarily market and sell our products to leading original equipment manufacturer ("OEM") customers. Our solutions are targeted at applications where memory plays a key role in meeting system performance requirements. We leverage a portfolio of proprietary technologies and design techniques, including efficient planar design, alternative packaging techniques and custom semiconductor logic, to deliver memory subsystems with high memory density, small form factor, high signal integrity, attractive thermal characteristics and low cost per bit.

        We were incorporated in Delaware in June 2000 and commenced operations in September 2000.

Recent Developments

        In November 2009, we introduced HyperCloud™ DDR3 memory technology. HyperCloud™ utilizes an ASIC chipset that incorporates Netlist patented rank multiplication technology that increases memory capacity and load reduction functionality that increases memory bandwidth. We expect that this technology will make possible improved levels of performance for memory intensive datacenter applications and workloads, including enterprise virtualization, cloud computing infrastructure, business intelligence real-time data analytics, and high performance computing. HyperCloud™ memory is being evaluated by several of our OEM customers for use in their server products. HyperCloud™ is

1

Table of Contents

interoperable with Joint Electronics Devices Engineering Council ("JEDEC") standard DDR3 memory modules. Our HyperCloud™ products are designed to allow for installation in servers without the need for a BIOS change. As such, their anticipated sales launch is not dependent on the design plans or product cycle of our OEM customers. However, we have experienced a longer qualification cycle than anticipated. As of January 1, 2011, we have not shipped any production quantities of HyperCloud™.

        In February 2010, we announced general availability of NVvault™ battery-free, a non-volatile cache memory subsystem targeting Redundant Array of Independent Disks, ("RAID") storage applications. NVvault™ battery-free provides server and storage OEMs a solution for enhanced datacenter fault recovery. Unlike our traditional battery-powered fault tolerant cache product which relied solely on batteries to power the cache, NVvault™ battery-free utilizes a combination of DRAM for high throughput performance and flash for extended data retention. The introduction of NVvault™ battery-free, as well as the launch of the current version of the battery-powered module in connection with Dell, Inc.'s ("Dell") introduction of the PERC 7 line of servers in December 2009, has resulted in RAID controller subsystem revenues of $20.2 million, or 54% of total revenues for 2010, including $4.8 million of NVvault™. This compares favorably with $7.3 million in RAID controller subsystem revenues, or 40% of total revenues for 2009. Although revenues in 2010 have been primarily for shipments to Dell, in the fourth quarter of 2010 we qualified NVvault™ battery-free with other OEMs. We also intend to pursue end-user opportunities.

        The remainder of our revenues arose primarily from OEM sales of custom memory modules, the majority of which were utilized in data center and industrial applications. When developing custom modules for an equipment product launch, we engage with our OEM customers from the earliest stages of new product definition, providing us unique insight into their full range of system architecture and performance requirements. This close collaboration has also allowed us to develop a significant level of systems expertise. We leverage a portfolio of proprietary technologies and design techniques, including efficient planar design, alternative packaging techniques and custom semiconductor logic, to deliver memory subsystems with high speed, capacity and signal integrity, small form factor, attractive thermal characteristics and low cost per bit. Revenues from custom modules have improved as a result of OEM product placements on new platforms and improved economic conditions compared with 2009. The continuation of this trend, which cannot be assured, is dependent on our ability to qualify our memory modules on new platforms as current platforms reach the end of their life cycles, and on the state of the global economy.

Technology

        We have a portfolio of proprietary technologies and design techniques and have assembled an engineering team with expertise in semiconductors, printed circuit boards, memory subsystem and system design. Our technology competencies include:

        IC Design Expertise.    We have designed blocks of custom logic that can be implemented in stand-alone integrated circuits or integrated with other functional blocks in ASICs. We use these custom logic blocks in the HyperCloud™ chipset to incorporate rank multiplication and load reduction functionality onto standard registered dual in-line memory modules "RDIMMs". We also incorporate custom logic in our NVvault™ product line.

        Very Low Profile Designs.    We were the first company to create memory subsystems in a form factor of less than one inch in height. We believe our proprietary board design technology is particularly useful in the blade server market, where efficient use of motherboard space is critical. Our technology has allowed us to decrease the system board space required for memory, and improve thermal performance and operating speeds, by enabling our customers to use alternative methods of component layout.

2

Table of Contents

        Proprietary PCB Designs.    We utilize advanced, proprietary techniques to optimize electronic signal strength and integrity within a PCB. These techniques include the use of 8- or 10-layer boards, matching conductive trace lengths, a minimized number of conductive connectors, or vias, and precise load balancing to, among other things, help reduce noise and crosstalk between adjacent traces. In addition, our proprietary designs for the precise placement of intra-substrate components allow us to assemble memory subsystems with significantly smaller physical size, enabling OEMs to develop products with smaller footprints for their customers.

        Planar Design.    Our planar solutions are designed to provide high density solutions in a more cost-effective manner than traditional chip-stacking. We believe traditional chip-stacking can represent a significant portion of the total cost of a memory subsystem. Our planar solutions achieve the same densities as chip-stacked modules but do so by leveraging our PCB design expertise to place integrated circuits in two rows in the same plane rather than on top of each other. Our planar memory subsystem designs feature high memory capacity with improved thermal characteristics by dissipating heat uniformly throughout the PCB.

        Advanced Planar Designs.    We plan to extend our planar design capabilities to develop very high density memory subsystems. These advanced planar designs may allow us to build modular solutions at lower costs compared to other packaging technologies. Additionally, these advanced planar solutions may remove heat generated by memory components in a more effective manner and can be used to build memory subsystems in a number of densities and form factors.

        Thermal Management Designs.    We design our memory subsystems to ensure effective heat dissipation. We use thermal cameras to obtain thermal profiles of the memory subsystem during the design phase, allowing us to rearrange components to enhance thermal characteristics and, if necessary, replace components that do not meet specifications. We use thermal simulation and modeling software to create comprehensive heat transfer models of our memory subsystems, which enables our engineers to quickly develop accurate solutions for potential thermal issues. We also develop and use proprietary heat spreaders to enhance the thermal management characteristics of our memory subsystems.

Customers

        We primarily market and sell our products to leading OEMs in the server, storage and communications markets. Consistent with the concentrated nature of the OEM customer base in our target markets, a small number of large customers have historically accounted for a significant portion of our net sales. Dell and F5 Networks, Inc. ("F5 Networks") represented approximately 59% and 19%, respectively, of our net sales in 2010. Dell and DRS Electronics, Inc. ("DRS Electronics") represented approximately 53% and 13%, respectively, of our net sales in 2009. Net sales to some of our OEM customers include memory modules that are qualified by us directly with the OEM customer and sold to electronic manufacturing services providers ("EMSs"), for incorporation into products manufactured exclusively for the OEM customer or, in some instances, to facilitate credit and logistics. These net sales to EMSs have historically fluctuated period to period as a portion of the total net sales to the OEM customers. Net sales to Hon Hai Precision Industry Co. Ltd., an EMS operating under the trade name of Foxconn that purchases memory modules from us for incorporation into products manufactured exclusively for Dell, represented approximately 96% and 76% of net sales to Dell for 2010 and 2009, respectively. Arrow Electronics Inc. ("Arrow") is an EMS for DRS Electronics. Substantially all of our products used by DRS Electronics are sold to Arrow for incorporation in subassembly products. Similarly, substantially all of the products sold to F5 Networks were sold through Flextronics International Ltd. For further information regarding our sales to our OEM customer base, please refer to Note 12 of Notes to Consolidated Financial Statements included in Part IV, Item 15 of this Report.

3

Table of Contents

        We expect that our key customers will continue to account for a substantial portion of our net sales in 2011 and in the foreseeable future. The composition of major customers and their respective contributions to our net sales have varied and will likely continue to vary from period to period. Our sales are made primarily pursuant to standard purchase orders that may be rescheduled on relatively short notice. Customers are generally allowed limited rights of return for up to 30 days, except for sales of excess inventories, which contain no right-of-return privileges. Estimated returns are provided for at the time of sale based on historical experience or specific identification of an event necessitating a reserve. While these returns have historically been within our expectations and the provisions established, we cannot guarantee that we will continue to experience similar return rates in the future. Any significant increase in product failure rates and the resulting product returns could have a material adverse effect on our operating results for the period or periods in which such returns materialize.

        We offer warranties on our memory subsystems generally ranging from one to three years, depending on the product and negotiated terms of purchase agreements with our customers. Such warranties require us to repair or replace defective product returned to us during such warranty period at no cost to the customer. Our estimates for warranty related costs are recorded at the time of sale based on historical and estimated future product return rates and expected repair or replacement costs. While such costs have historically been within our expectations and the provisions established, unexpected changes in failure rates could have a material adverse impact on us, requiring additional warranty reserves, and adversely affecting our gross profit and gross margins.

Sales and Marketing

        We market and sell our products through a direct sales force and a network of independent sales representatives. Our sales activities focus primarily on developing strong relationships at the technical, marketing and executive management levels within market-leading OEMs. Additionally, our marketing strategy for our HyperCloud™ includes the creation of demand through end-user evaluation and demonstration activities in vertical computing markets. Our OEM customers design systems for a variety of applications that require a significant number of high performance memory subsystems, representing substantial opportunities for us. We have been successful in developing OEM relationships through our ability to provide high performance memory subsystems. Our direct sales group and field application engineers work closely with our OEM customers at an early stage of their design cycles to solve their design challenges and to design our products into their systems.

        We believe in the timely communication and exchange of information with our customers. We utilize well-trained, highly technical program management teams to successfully drive new product development and quickly respond to our customers' needs and expectations. Our program management teams provide quick response times and act as a single point-of-contact for routine issues during the sales process. Additionally, they address the long-term business and technology goals of our customers. We employ a team approach to business development whereby our sales team and independent representatives identify, qualify and prioritize customer prospects through offices in a number of locations worldwide. For additional information regarding our net sales from external customers by geographic area, refer to Note 13 of Notes to Consolidated Financial Statements, included in Part IV, Item 15 of this Report.

Manufacturing

        We manufacture substantially all of our products at our facilities in Suzhou in the PRC. Our advanced engineering and design capabilities, combined with our in-house manufacturing processes, allow us to assemble our memory subsystems reliably and in high volume. Our advanced, customized manufacturing facilities are capable of surface mount assembly, subsystem testing, system-level burn-in testing, programming, marking, labeling and packaging. At each stage of the production cycle, including product prototyping, qualification sample production and high-volume manufacturing and delivery, we

4

Table of Contents

focus on providing our customers with rapid response and short manufacturing turn-around times. Manufacturing cycle times for our products are typically one week or less, and in some cases as few as two days, from receipt of order.

        We acquire components and materials such as ASICs, DRAM ICs and NAND directly from integrated circuit manufacturers and assemble them into finished subsystems. We believe that one of our key strengths is the efficient procurement and management of components for our subsystems, which benefits our customers in the form of lower costs and increased product availability. We have a limited number of suppliers, including Samsung Electronics, Hynix Semiconductor and Micron Semiconductor, each of which comprise more than 10% of our total purchases. We have developed strong supplier relationships with these and other key DRAM IC and NAND manufacturers, which we believe gives us direct and ready access to the critical components that we need for our production activities. We typically qualify our products with our customers using multiple manufacturers of DRAM ICs and NAND. The flexibility to choose from several DRAM IC and NAND providers allows us to minimize product cost and maximize product availability. Our HyperCloud™ RDIMM contains an ASIC chipset component. We intend to procure these ASICs from multiple integrated circuit vendors that are in varying stages of chipset development.

        We schedule production based on purchase order commitments and anticipated orders. We release raw materials to the manufacturing floor by means of an on-line shop floor control system, which allows for internal quality analysis, direct access to inventory information and production floor material tracking. We have a flexible manufacturing workforce which allows us to manage unforecasted demand. In addition, in order to mitigate inventory risks, we have the capability to sell excess quantities of certain component inventories of DRAM ICs and NAND to distributors and other users of memory integrated circuits. However, the ASIC and DRAM components used in our HyperCloud™ product have limited alternative uses. As such, we may not be able to sell excess quantities of the components, should we fail to obtain qualification with major OEMs. Our sales of excess inventory generated less than 1% of our net sales in 2010 and approximately 4% of our net sales in 2009.

        Our quality assurance engineers work with our suppliers to ensure that the raw materials we receive meet our high quality standards. These engineers also perform onsite supplier factory audits and use our internal test and inspection systems to verify that purchased components and materials meet our specifications. Our supplier quality program and incoming material quality control program are important aspects of our overall manufacturing process.

        We perform ongoing reliability testing on our memory subsystems and share the results of that testing with our customers. We believe that this improves the system design process and allows for the elimination of potential problems at the earliest possible stage. In addition, we have implemented procedures which require that all of our memory subsystems undergo functional and system burn-in testing prior to delivery to the customer. We complement our test capabilities with advanced imaging technology to inspect the quality of our assemblies.

        We are certified in ISO 9001:2000 Quality Management Systems, ISO 14001:2004 Environmental Management Standards, and OSHAS 18001:2007 Occupational Health and Safety Management Systems.

Competition

        Our products are primarily targeted for the server, high performance computing and communications markets. These markets are intensely competitive, as numerous companies vie for business opportunities at a limited number of large OEMs. Our primary competitors are memory module providers such as STEC, SMART Modular Technologies, Inc., and Viking Interworks, a division of Sanmina-SCI Corporation. We face competition from DRAM suppliers, including Hynix, Samsung and Micron for many of our products, including HyperCloud™. We also face potential direct or indirect

5

Table of Contents

competition from logic suppliers such as Inphi and IDT. As we enter new markets and pursue additional applications for our products, we may face competition from a larger number of competitors that produce solutions utilizing similar or competing technologies.

        Certain of our competitors have substantially greater financial, technical, marketing, distribution and other resources, broader product lines, lower cost structures, greater brand recognition and longer standing relationships with customers and suppliers. Some of our competitors may also have a greater ability to influence industry standards than we do, as well as more extensive patent portfolios.

        Some of our customers and suppliers may have proprietary products or technologies that are competitive with our products, or could develop internal solutions or enter into strategic relationships with, or acquire, existing high-density memory module providers. Any of these actions could reduce our customers' demand for our products. Some of our significant suppliers of memory integrated circuits may be able to manufacture competitive products at lower costs by leveraging internal efficiencies, or could choose to reduce our supply of memory integrated circuits, adversely affecting our ability to manufacture our memory subsystems on a timely basis, if at all.

        Our ability to compete in our current target markets and in future markets will depend in large part on our ability to successfully develop, introduce and sell new and enhanced products on a timely and cost-effective basis, and to respond to changing market requirements. We believe that the principal competitive factors in the selection of high performance memory subsystems by potential customers are:

•

understanding of OEM system and business requirements;



•

timeliness of new value-add product introductions;



•

design characteristics and performance;



•

quality and reliability;



•

track record of volume delivery;



•

credibility with the customer;



•

fulfillment capability and flexibility; and



•

price.

        We believe that we compete favorably with respect to these factors. However, our current and future competitors could develop competing products that could cause a decline in sales or loss of market acceptance of our products.

Research and Development

        The market for high performance memory subsystems is constantly changing and therefore continuous development of new technology, processes and product innovation is mandatory to be successful as a leading supplier. We believe that the continued and timely development of new products and improvement of existing products are critical to maintaining our competitive position. Our team of engineers focuses on developing custom semiconductor logic devices and products with innovative thermal solutions, packaging solutions and improved electrical signal integrity that enhances reliability over the life of the system and achieves higher speeds and lowers power consumption. Also, our engineers incorporate various new techniques and methodologies for testing as well as new processes for manufacturing our products.

        Our engineering staff closely engages with our OEM partners and their engineering teams at early stages in their system development. This collaboration allows our engineers to understand the customer's system architecture, power budget, operating environment such as air flow and operating temperature and any mechanical constraints. Our engineers use this information to provide guidance and solutions to implement optimum memory subsystems to our OEM partners. An important aspect of our research and development effort is to understand the challenges faced by our OEM partners and provide cost effective solutions that satisfy their requirements by utilizing our industry knowledge, proprietary technologies and technical expertise.

6

Table of Contents

        We use advanced design tools in development of our products that allow us to model behavior of a signal trace on our memory modules as well as airflow and thermal profiles of all components in the system. These design tools enable real-time simulation for signal integrity and behavioral modeling of our designs using the Input/Output Buffer Information Specification ("IBIS") of our suppliers' components. These simulation tools help us reduce or eliminate electronic signal reflections, clock skews, signal jitter and noise which can reduce system performance and reliability. Also, our engineers use thermal simulation tools to identify potential thermal problems arising from inadequate airflow necessary to cool the components in the system. These efforts allow our engineers to develop optimum thermal solutions for our customer base.

        We believe that to remain competitive we must continue to focus on developing advanced memory technologies. We have invested significant resources in the design of custom semiconductor logic devices. These logic devices are integrated into our next-generation memory subsystems in order to improve their performance. For example, our HyperCloud™ logic devices enable our DRAM-based subsystems to achieve higher speeds and address greater memory capacity at a lower price point than currently available products in the market. Logic devices in our NVvault™ battery-free product enable DRAM and flash memory to be efficiently combined for the purposes of backing up data storage. The development of these semiconductor devices are an important part of our overall effort to maintain a strong competitive position in our industry based on advanced memory technology.

        Our customers typically do not separately compensate us for design and engineering work involved in developing application-specific products for them. Our total expenditures for research and development were approximately $14.8 million and $8.1 million for 2010 and 2009, respectively.

Intellectual Property

        Our high performance memory subsystems are developed in part using our proprietary intellectual property, and we believe that the strength of our intellectual property rights will be important to the success of our business. We utilize patent and trade secret protection, confidentiality agreements with customers and partners, disclosure and invention assignment agreements with employees and consultants and other contractual provisions to protect our intellectual property and other proprietary information.

        As of January 1, 2011, we had 17 patents issued and 24 patent applications pending. Assuming that they are properly maintained, our patents will expire at various dates between 2022 and 2027. Our issued patents and patent applications relate to the use of custom logic in high performance memory subsystems, PCB design, layout and packaging techniques. We intend to actively pursue the filing of additional patent applications related to our technology advancements. While we believe that our patent and other intellectual property rights are important to our success, our technical expertise and ability to introduce new products in a timely manner also will continue to be important factors in developing and maintaining our competitive position. Accordingly, we believe that our business is not materially dependent upon any one claim in any of our existing patents or pending patent applications.

        Despite our precautions, a third party may reverse engineer, copy or otherwise obtain and use our products, services or technology without authorization, develop similar technology independently or design around any patents issued to us. There can be no assurance that our efforts taken to prevent misappropriation or infringement of our intellectual property by third parties have been or will be successful.

Employees

        At January 1, 2011, we had approximately 232 employees (including 131 regular employees and 101 temporary employees). Approximately 74 of the regular employees were located in the U.S., and approximately 57 were located in other countries (mainly in the PRC). We had 137 employees in

7

Table of Contents

operations, 34 employees in research and development, 20 employees in sales and marketing, and 11 employees engaged in other administrative functions. We are not party to any collective bargaining agreements with any of our employees. We have never experienced a work stoppage, and we believe our employee relations are good.

General Information

        We maintain a website at www.netlist.com (this uniform resource locator, or URL, is an inactive textual reference only and is not intended to incorporate our website into this Form 10-K). We file reports with the Securities and Exchange Commission ("SEC"), and make available, free of charge, on or through our website, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy and information statements and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. Our website also contains copies of our corporate governance policy, code of business conduct and ethics, insider trading policy and whistleblower policy, as well as copies of the charters for our audit committee, compensation committee and nominating and corporate governance committee.

Item 1A.    Risk Factors

        You should consider each of the following factors as well as the other information in this Report in evaluating our business and our prospects. The risks described below are not the only ones we face. Additional risks we are not presently aware of or that we currently believe are immaterial may also impair our business operations. The trading price of our common stock could decline due to any of these risks, and you could lose all or part of your investment. In assessing these risks, you should also refer to the other information contained or incorporated by reference in this Report, including our consolidated financial statements and related notes.

Risks related to our business

We expect a number of factors to cause our operating results to fluctuate on a quarterly and annual basis, which may make it difficult to predict our future performance.

        Our operating results have varied significantly in the past and will continue to fluctuate from quarter-to-quarter or year-to-year in the future due to a variety of factors, many of which are beyond our control. Factors relating to our business that may contribute to these quarterly and annual fluctuations include the following factors, as well as other factors described elsewhere in this Report:

•

our inability to develop new or enhanced products that achieve customer or market acceptance in a timely manner, including our HyperCloud™ memory module and our flash-based memory products;



•

our failure to maintain the qualification of our products with our current customers or to qualify current and future products with our current or prospective customers in a timely manner or at all;



•

the timing of actual or anticipated introductions of competing products or technologies by us or our competitors, customers or suppliers;



•

the loss of, or a significant reduction in sales to, a key customer;



•

the cyclical nature of the industry in which we operate;



•

a reduction in the demand for our high performance memory subsystems or the systems into which they are incorporated;

8

Table of Contents

•

our customers' failure to pay us on a timely basis;



•

costs, inefficiencies and supply risks associated with outsourcing portions of the design and the manufacture of integrated circuits;



•

our ability to absorb manufacturing overhead if our revenues decline or vary from our projections;



•

delays in fulfilling orders for our products or a failure to fulfill orders;



•

our ability to procure an adequate supply of key components, particularly DRAM ICs and NAND;



•

dependence on large suppliers who are also competitors and whose manufacturing priorities may not support our production schedules;



•

changes in the prices of our products or in the cost of the materials that we use to build our products, including fluctuations in the market price of DRAM ICs and NAND;



•

our ability to effectively operate our manufacturing facility in the PRC;



•

manufacturing inefficiencies associated with the start-up of new manufacturing operations, new products and initiation of volume production;



•

our failure to produce products that meet the quality requirements of our customers;



•

disputes regarding intellectual property rights and the possibility of our patents being reexamined by the USPTO;



•

the costs and management attention diversion associated with litigation;



•

the loss of any of our key personnel;



•

changes in regulatory policies or accounting principles;



•

our ability to adequately manage or finance internal growth or growth through acquisitions; and



•

the effect of our investments and financing arrangements on our liquidity.

        Due to the various factors mentioned above, and others, the results of any prior quarterly or annual periods should not be relied upon as an indication of our future operating performance. In one or more future periods, our results of operations may fall below the expectations of securities analysts and investors. In that event, the market price of our common stock would likely decline. In addition, the market price of our common stock may fluctuate or decline regardless of our operating performance.

We have historically incurred losses and may continue to incur losses.

        Since the inception of our business in 2000, we have only experienced one fiscal year (2006) with profitable results. In order to regain profitability, or to achieve and sustain positive cash flows from operations in the future, we must further reduce operating expenses and/or increase our revenues. Although we have in the past engaged in a series of cost reduction actions, and believe that we could reduce our current level of expenses through elimination or reduction of strategic initiatives, such expense reductions alone may not make us profitable or allow us to sustain profitability if it is achieved. Our ability to achieve profitability will depend on increased revenue growth from, among other things, increased demand for our memory subsystems and related product offerings, as well as our ability to expand into new and emerging markets. We may not be successful in achieving the necessary revenue growth or the expected expense reductions. Moreover, we may be unable to sustain

9

Table of Contents

past or expected future expense reductions in subsequent periods. We may not achieve profitability or sustain such profitability, if achieved, on a quarterly or annual basis in the future.

        Any failure to achieve profitability could result in increased capital requirements and pressure on our liquidity position. We believe our future capital requirements will depend on many factors, including our levels of net sales, the timing and extent of expenditures to support sales, marketing, research and development activities, the expansion of manufacturing capacity both domestically and internationally and the continued market acceptance of our products. Our capital requirements could result in our having to, or otherwise choosing to, seek additional funding through public or private equity offerings or debt financings. However, many companies are experiencing difficulty in achieving access to capital in these challenging times. Such funding may not be available on terms acceptable to us, or at all, either of which could result in our inability to meet certain of our financial obligations and other related commitments.

We are subject to risks relating to product concentration and lack of market diversification.

        We have historically derived a substantial portion of our net sales from sales of our high performance memory subsystems for use in the server market. We expect these memory subsystems to continue to account for a significant portion of our net sales in the near term. Continued market acceptance of these products for use in servers is critical to our success.

        In an attempt to set our products apart from those of our competitors, we have invested a significant portion of our research and development budget into the design of ASIC devices, such as the HyperCloud™ memory subsystem, introduced in November 2009. This new design and the products they are incorporated into are subject to increased risks as compared to our existing products. For example:

•

we may be unable to achieve customer or market acceptance of the HyperCloud™ memory subsystem or other new products, or achieve such acceptance in a timely manner;



•

the HyperCloud™ memory subsystem or other new products may contain currently undiscovered flaws, the correction of which would result in increased costs and time to market;



•

we are dependent on a limited number of suppliers for both the DRAM ICs and the ASIC devices that are essential to the functionality of the HyperCloud™ memory subsystem, and could experience supply chain disruption as a result of business issues that are specific to our suppliers or the industry as a whole; and



•

we will be required to demonstrate the quality and reliability of the HyperCloud™ memory subsystem or other new products to our customers, and will be required to qualify these new products with our customers, both of which will require a significant investment of time and resources prior to the receipt of any revenue from such customers.

        Any failure or delay in placing or qualifying new products with our customers would likely result in reductions in our net sales and would adversely impact our results of operations.

        Additionally, if the demand for servers deteriorates or if the demand for our products to be incorporated in servers declines, our operating results would be adversely affected, and we would be forced to diversify our product portfolio and our target markets. We may not be able to achieve this diversification, and our inability to do so may adversely affect our business.

We may lose our competitive position if we are unable to timely and cost-effectively develop new or enhanced products that meet our customers' requirements and achieve market acceptance.

        Our industry is characterized by intense competition, rapid technological change, evolving industry standards and rapid product obsolescence. Evolving industry standards and technological change or

10

Table of Contents

new, competitive technologies could render our existing products obsolete. Accordingly, our ability to compete in the future will depend in large part on our ability to identify and develop new or enhanced products on a timely and cost-effective basis, and to respond to changing customer requirements. In order to develop and introduce new or enhanced products, we need to:

•

identify and adjust to the changing requirements of our current and potential customers;



•

identify and adapt to emerging technological trends and evolving industry standards in our markets;



•

design and introduce cost-effective, innovative and performance-enhancing features that differentiate our products from those of our competitors;



•

develop relationships with potential suppliers of components required for these new or enhanced products;



•

qualify these products for use in our customers' products; and



•

develop and maintain effective marketing strategies.

        Our product development efforts are costly and inherently risky. It is difficult to foresee changes or developments in technology or anticipate the adoption of new standards. Moreover, once these things are identified, if at all, we will need to hire the appropriate technical personnel or retain third party designers, develop the product, identify and eliminate design flaws, and manufacture the product in production quantities either in-house or through third-party manufacturers. As a result, we may not be able to successfully develop new or enhanced products or we may experience delays in the development and introduction of new or enhanced products. Delays in product development and introduction could result in the loss of, or delays in generating, net sales and the loss of market share, as well as damage to our reputation. Even if we develop new or enhanced products, they may not meet our customers' requirements or gain market acceptance. Accordingly, we cannot assure you that our future product development efforts will result in the development of new or enhanced products or that such products will achieve market acceptance.

Our customers require that our products undergo a lengthy and expensive qualification process without any assurance of net sales.

        Our prospective customers generally make a significant commitment of resources to test and evaluate our memory subsystems prior to purchasing our products and integrating them into their systems. This extensive qualification process involves rigorous reliability testing and evaluation of our products, which may continue for six months or longer and is often subject to delays. In addition to qualification of specific products, some of our customers may also require us to undergo a technology qualification if our product designs incorporate innovative technologies that the customer has not previously encountered. Such technology qualifications often take substantially longer than product qualifications and can take over a year to complete. Qualification by a prospective customer does not ensure any sales to that prospective customer. Even after successful qualification and sales of our products to a customer, changes in our products, our manufacturing facilities, our production processes or our component suppliers may require a new qualification process, which may result in additional delays.

        In addition, because the qualification process is both product-specific and platform-specific, our existing customers sometimes require us to requalify our products, or to qualify our new products, for use in new platforms or applications. For example, as our OEM customers transition from prior generation DDR2 DRAM architectures to current generation DDR3 DRAM architectures, we must design and qualify new products for use by those customers. In the past, this process of design and qualification has taken up to six months to complete, during which time our net sales to those

11

Table of Contents

customers declined significantly. After our products are qualified, it can take several months before the customer begins production and we begin to generate net sales.

        We must devote substantial resources, including design, engineering, sales, marketing and management efforts, to qualify our products with prospective customers in anticipation of sales. Significant delays in the qualification process, such as those experienced with our HyperCloud™ product, could result in an inability to keep up with rapid technology change or new, competitive technologies. If we delay or do not succeed in qualifying a product with an existing or prospective customer, we will not be able to sell that product to that customer, which may result in our holding excess and obsolete inventory and harm our operating results and business.

Sales to a limited number of customers represent a significant portion of our net sales and the loss of, or a significant reduction in sales to, any one of these customers could materially harm our business.

        Sales to certain of our OEM customers have historically represented a substantial majority of our net sales. Approximately 59% and 19% of our net sales in 2010 were to two of our customers and approximately 53% and 13% of our net sales in 2009 were to two of our customers. We currently expect that sales to major OEM customers will continue to represent a significant percentage of our net sales for the foreseeable future. We do not have long-term agreements with our OEM customers, or with any other customer. Any one of these customers could decide at any time to discontinue, decrease or delay their purchase of our products. In addition, the prices that these customers pay for our products could change at any time. The loss of any of our OEM customers, or a significant reduction in sales to any of them, could significantly reduce our net sales and adversely affect our operating results.

        Our ability to maintain or increase our net sales to our key customers depends on a variety of factors, many of which are beyond our control. These factors include our customers' continued sales of servers and other computing systems that incorporate our memory subsystems and our customers' continued incorporation of our products into their systems. Because of these and other factors, net sales to these customers may not continue and the amount of such net sales may not reach or exceed historical levels in any future period. Because these customers account for a substantial portion of our net sales, the failure of any one of these customers to pay on a timely basis would negatively impact our cash flow. In addition, while we may not be contractually obligated to accept returned products, we may determine that it is in our best interest to accept returns in order to maintain good relations with our customers.

A limited number of relatively large potential customers dominate the markets for our products.

        Our target markets are characterized by a limited number of large companies. Consolidation in one or more of our target markets may further increase this industry concentration. As a result, we anticipate that sales of our products will continue to be concentrated among a limited number of large customers in the foreseeable future. We believe that our financial results will depend in significant part on our success in establishing and maintaining relationships with, and effecting substantial sales to, these potential customers. Even if we establish these relationships, our financial results will be largely dependent on these customers' sales and business results.

If a standardized memory solution which addresses the demands of our customers is developed, our net sales and market share may decline.

        Many of our memory subsystems are specifically designed for our OEM customers' high performance systems. In a drive to reduce costs and assure supply of their memory module demand, our OEM customers may endeavor to design JEDEC standard DRAM modules into their new products. Although we also manufacture JEDEC modules, this trend could reduce the demand for our

12

Table of Contents

higher priced customized memory solutions which in turn would have a negative impact on our financial results. In addition, customers deploying custom memory solutions today may in the future choose to adopt a JEDEC standard, and the adoption of a JEDEC standard module instead of a previously custom module might allow new competitors to participate in a share of our customers' memory module business that previously belonged to us.

        If our OEM customers were to adopt JEDEC standard modules, our future business may be limited to identifying the next generation of high performance memory demands of OEM customers and developing solutions that addresses such demands. Until fully implemented, this next generation of products may constitute a much smaller market, which may reduce our net sales and market share.

We may not be able to maintain our competitive position because of the intense competition in our targeted markets.

        We participate in a highly competitive market, and we expect competition to intensify. Many of our competitors have longer operating histories, significantly greater resources and name recognition, a larger base of customers and longer-standing relationships with customers and suppliers than we have. As a result, some of these competitors are able to devote greater resources to the development, promotion and sale of products and are better positioned than we are to influence customer acceptance of their products over our products. These competitors also may be able to respond better to new or emerging technologies or standards and may be able to deliver products with comparable or superior performance at a lower price. For these reasons, we may not be able to compete successfully against these competitors. We also expect to face competition from new and emerging companies that may enter our existing or future markets. These potential competitors may have similar or alternative products which may be less costly or provide additional features.

        In addition to the competition we face from DRAM and logic suppliers such as Hynix, Samsung, Micron, Inphi and IDT, some of our OEM customers have their own internal design groups that may develop solutions that compete with ours. These design groups have some advantages over us, including direct access to their respective companies' technical information and technology roadmaps. Our OEM customers also have substantially greater resources, financial and otherwise, than we do, and may have lower cost structures than ours. As a result, they may be able to design and manufacture competitive products more efficiently or inexpensively. If any of these OEM customers are successful in competing against us, our sales could decline, our margins could be negatively impacted and we could lose market share, any or all of which could harm our business and results of operations. Further, some of our significant suppliers are also competitors, many of whom have the ability to manufacture competitive products at lower costs as a result of their higher levels of integration.

        We expect our competitors to continue to improve the performance of their current products, reduce their prices and introduce new or enhanced technologies that may offer greater performance and improved pricing. If we are unable to match or exceed the improvements made by our competitors, our market position would deteriorate and our net sales would decline. In addition, our competitors may develop future generations and enhancements of competitive products that may render our technologies obsolete or uncompetitive.

Our operating results may be adversely impacted by worldwide economic and political uncertainties and specific conditions in the markets we address, including the cyclical nature of and volatility in the memory market and semiconductor industry.

        Adverse changes in domestic and global economic and political conditions have made it extremely difficult for our customers, our vendors and us to accurately forecast and plan future business activities, and they have caused and could continue to cause U.S. and foreign businesses to slow spending on our products and services, which would further delay and lengthen sales cycles. In addition, sales of our

13

Table of Contents

products are dependent upon demand in the computing, networking, communications, printer, storage and industrial markets. These markets have been cyclical and are characterized by wide fluctuations in product supply and demand. These markets have experienced significant downturns, often connected with, or in anticipation of, maturing product cycles, reductions in technology spending and declines in general economic conditions. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and the erosion of average selling prices.

        We may experience substantial period-to-period fluctuations in future operating results due to factors affecting the computing, networking, communications, printers, storage and industrial markets. A decline or significant shortfall in demand in any one of these markets could have a material adverse effect on the demand for our products. As a result, our sales will likely decline during these periods. In addition, because many of our costs and operating expenses are relatively fixed, if we are unable to control our expenses adequately in response to reduced sales, our gross margins, operating income and cash flow would be negatively impacted.

        During challenging economic times our customers may face issues gaining timely access to sufficient credit, which could result in an impairment of their ability to make timely payments to us. If that were to occur, we may be required to increase our allowance for doubtful accounts and our days sales outstanding would be negatively impacted. Furthermore, our vendors may face similar issues gaining access to credit, which may limit their ability to supply components or provide trade credit to us. We cannot predict the timing, strength or duration of any economic slowdown or subsequent economic recovery, worldwide, or in the memory market and related semiconductor industry. If the economy or markets in which we operate do not continue to improve or if conditions worsen, our business, financial condition and results of operations will likely be materially and adversely affected. Additionally, the combination of our lengthy sales cycle coupled with challenging macroeconomic conditions could compound the negative impact on the results of our operations.

Our lack of a significant backlog of unfilled orders, and the difficulty inherent in forecasting customer demand, makes it difficult to forecast our short-term production requirements to meet that demand, and any failure to optimally calibrate our production capacity and inventory levels to meet customer demand could adversely affect our revenues, gross margins and earnings.

        We make significant decisions regarding the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimates of customer requirements. We do not have long-term purchase agreements with our customers. Instead, our customers often place purchase orders no more than two weeks in advance of their desired delivery date, and these purchase orders generally have no cancellation or rescheduling penalty provisions. The short-term nature of commitments by many of our customers, the fact that our customers may cancel or defer purchase orders for any reason, and the possibility of unexpected changes in demand for our customers' products each reduce our ability to accurately estimate future customer requirements for our products. This fact, combined with the quick turn-around times that apply to each order, makes it difficult to forecast our production needs and allocate production capacity efficiently. We attempt to forecast the demand for the DRAM ICs, NAND, and other components needed to manufacture our products. Lead times for components vary significantly and depend on various factors, such as the specific supplier and the demand and supply for a component at a given time.

        Our production expense and component purchase levels are based in part on our forecasts of our customers' future product requirements and to a large extent are fixed in the short term. As a result, we likely will be unable to adjust spending on a timely basis to compensate for any unexpected shortfall in those orders. If we overestimate customer demand, we may have excess raw material inventory of DRAM ICs and NAND. If there is a subsequent decline in the prices of DRAM ICs or NAND, the value of our inventory will fall. As a result, we may need to write-down the value of our DRAM IC or

14

Table of Contents

NAND inventory, which may result in a significant decrease in our gross margin and financial condition. Also, to the extent that we manufacture products in anticipation of future demand that does not materialize, or in the event a customer cancels or reduces outstanding orders, we could experience an unanticipated increase in our finished goods inventory. In the past, we have had to write-down inventory due to obsolescence, excess quantities and declines in market value below our costs. Any significant shortfall of customer orders in relation to our expectations could hurt our operating results, cash flows and financial condition.

        Also, any rapid increases in production required by our customers could strain our resources and reduce our margins. If we underestimate customer demand, we may not have sufficient inventory of DRAM ICs and NAND on hand to manufacture enough product to meet that demand. We also may not have sufficient manufacturing capacity at any given time to meet our customers' demands for rapid increases in production. These shortages of inventory and capacity will lead to delays in the delivery of our products, and we could forego sales opportunities, lose market share and damage our customer relationships.

Declines in our average sales prices, driven by volatile prices for DRAM ICs and NAND, among other factors, may result in declines in our revenues and gross profit.

        Our industry is competitive and historically has been characterized by declines in average sales price, based in part on the market price of DRAM ICs and NAND, which have historically constituted a substantial portion of the total cost of our memory subsystems. Our average sales prices may decline due to several factors, including overcapacity in the worldwide supply of DRAM and NAND memory components as a result of worldwide economic conditions, increased manufacturing efficiencies, implementation of new manufacturing processes and expansion of manufacturing capacity by component suppliers.

        Once our prices with a customer are negotiated, we are generally unable to revise pricing with that customer until our next regularly scheduled price adjustment. Consequently, we are exposed to the risks associated with the volatility of the price of DRAM ICs and NAND during that period. If the market prices for DRAM ICs and NAND increase, we generally cannot pass the price increases on to our customers for products purchased under an existing purchase order. As a result, our cost of sales could increase and our gross margins could decrease. Alternatively, if there are declines in the price of DRAM ICs and NAND, we may need to reduce our selling prices for subsequent purchase orders, which may result in a decline in our expected net sales.

        In addition, since a large percentage of our sales are to a small number of customers that are primarily distributors and large OEMs, these customers have exerted, and we expect they will continue to exert, pressure on us to make price concessions. If not offset by increases in volume of sales or the sales of newly-developed products with higher margins, decreases in average sales prices would likely have a material adverse effect on our business and operating results.

We use a small number of custom ASIC, DRAM IC and NAND suppliers and are subject to risks of disruption in the supply of custom ASIC, DRAM ICs and NAND.

        Our ability to fulfill customer orders or produce qualification samples is dependent on a sufficient supply of DRAM ICs and NAND, which are essential components of our memory subsystems. We are also dependent on a sufficient supply of custom ASIC devices to produce our HyperCloud™ memory modules. There are a relatively small number of suppliers of DRAM ICs and NAND, and we purchase from only a subset of these suppliers. We have no long-term DRAM or NAND supply contracts. Additionally, we could face obstacles in moving production of our ASIC components away from our current design and production partners. Our dependence on a small number of suppliers and the lack of any guaranteed sources of ASIC components, DRAM and NAND supply expose us to several risks, including the inability to obtain an adequate supply of these important components, price increases, delivery delays and poor quality.

15

Table of Contents

        Historical declines in customer demand and our revenues caused us to reduce our purchases of DRAM ICs and NAND. Such fluctuations could occur in the future. Should we not maintain sufficient purchase levels with some suppliers, our ability to obtain supplies of raw materials may be impaired due to the practice of some suppliers to allocate their products to customers with the highest regular demand.

        From time to time, shortages in DRAM ICs and NAND have required some suppliers to limit the supply of their DRAM ICs and NAND. As a result, we may be unable to obtain the DRAM ICs or NAND necessary to fill customers' orders for our products in a timely manner. If we are unable to obtain a sufficient supply of DRAM ICs or NAND to meet our customers' requirements, these customers may reduce future orders for our products or not purchase our products at all, which would cause our net sales to decline and harm our operating results. In addition, our reputation could be harmed, we may not be able to replace any lost business with new customers, and we may lose market share to our competitors.

        Our customers qualify the ASIC components, DRAM ICs and NAND of our suppliers for use in their systems. If one of our suppliers should experience quality control problems, it may be disqualified by one or more of our customers. This would disrupt our supplies of ASIC components, DRAM ICs and NAND and reduce the number of suppliers available to us, and may require that we qualify a new supplier. If our suppliers are unable to produce qualification samples on a timely basis or at all, we could experience delays in the qualification process, which could have a significant impact on our ability to sell that product.

If the supply of other component materials used to manufacture our products is interrupted, or if our inventory becomes obsolete, our results of operations and financial condition could be adversely affected.

        We use consumables and other components, including PCBs, to manufacture our memory subsystems. We sometimes procure PCBs and other components from single or limited sources to take advantage of volume pricing discounts. Material shortages or transportation problems could interrupt the manufacture of our products from time to time in the future. These delays in manufacturing could adversely affect our results of operations.

        Frequent technology changes and the introduction of next-generation products also may result in the obsolescence of other items of inventory, such as our custom-built PCBs, which could reduce our gross margin and adversely affect our operating performance and financial condition. We may not be able to sell some products developed for one customer to another customer because our products are often designed to address specific customer requirements, and even if we are able to sell these products to another customer, our margin on such products may be reduced.

A prolonged disruption of our manufacturing facility could have a material adverse effect on our business, financial condition and results of operations.

        We maintain a manufacturing facility in the PRC for producing most of our products, which allows us to utilize our materials and processes, protect our intellectual property and develop the technology for manufacturing. A prolonged disruption or material malfunction of, interruption in or the loss of operations at our manufacturing facility, or the failure to maintain a sufficient labor force at such facility, would limit our capacity to meet customer demand and delay new product development until a replacement facility and equipment, if necessary, were found. The replacement of the manufacturing facility could take an extended amount of time before manufacturing operations could restart. The potential delays and costs resulting from these steps could have a material adverse effect on our business, financial condition and results of operations.

16

Table of Contents

If we are unable to manufacture our products efficiently, our operating results could suffer.

        We must continuously review and improve our manufacturing processes in an effort to maintain satisfactory manufacturing yields and product performance, to lower our costs and to otherwise remain competitive. As we manufacture more complex products, the risk of encountering delays or difficulties increases. The start-up costs associated with implementing new manufacturing technologies, methods and processes, including the purchase of new equipment, and any resulting manufacturing delays and inefficiencies, could negatively impact our results of operations.

        If we need to add manufacturing capacity, an expansion of our existing manufacturing facility or establishment of a new facility could be subject to factory audits by our customers. Any delays or unexpected costs resulting from this audit process could adversely affect our net sales and results of operations. In addition, we cannot be certain that we will be able to increase our manufacturing capacity on a timely basis or meet the standards of any applicable factory audits.

We depend on third-parties to design and manufacture custom components for some of our products.

        Significant customized components, such as ASICs, that are used in some of our products are designed and manufactured by third parties. The ability and willingness of such third parties to perform in accordance with their agreements with us is largely outside of our control. If one or more of our design or manufacturing partners fails to perform its obligations in a timely manner or at satisfactory quality levels, our ability to bring products to market or deliver products to our customers, as well as our reputation, could suffer. In the event of any such failures, we may have no readily available alternative source of supply for such products, since, in our experience, the lead time needed to establish a relationship with a new design and/or manufacturing partner is at least 12 months, and the estimated time for our OEM customers to re-qualify our product with components from a new vendor ranges from four to nine months. We cannot assure you that we can redesign, or cause to have redesigned, our customized components to be manufactured by a new manufacturer in a timely manner, nor can we assure you that we will not infringe on the intellectual property of our current design or manufacture partner when we redesign the custom components, or cause such components to be redesigned by a new manufacturer. A manufacturing disruption experienced by our manufacturing partners, the failure of our manufacturing partners to dedicate adequate resources to the production of our products, the financial instability of our manufacturing or design partners, or any other failure of our design or manufacturing partners to perform according to their agreements with us, would have a material adverse effect on our business, financial condition and results of operations.

        We have many other risks due to our dependence on third-party manufacturers, including: reduced control over delivery schedules, quality, manufacturing yields and cost; the potential lack of adequate capacity during periods of excess demand; limited warranties on products supplied to us; and potential misappropriation of our intellectual property. We are dependent on our manufacturing partners to manufacture products with acceptable quality and manufacturing yields, to deliver those products to us on a timely basis and to allocate a portion of their manufacturing capacity sufficient to meet our needs. Although our products are designed using the process design rules of the particular manufacturers, we cannot assure you that our manufacturing partners will be able to achieve or maintain acceptable yields or deliver sufficient quantities of components on a timely basis or at an acceptable cost. Additionally, we cannot assure you that our manufacturing partners will continue to devote adequate resources to produce our products or continue to advance the process design technologies on which the qualification and manufacturing of our products are based.

17

Table of Contents

If our products do not meet the quality standards of our customers, we may be forced to stop shipments of products until the quality issues are resolved.

        Our customers require our products to meet strict quality standards. Should our products not meet such standards, our customers may discontinue purchases from us until we are able to resolve the quality issues that are causing us to not meet the standards. Such "quality holds" could have a significant adverse impact on our revenues and operating results.

If our products are defective or are used in defective systems, we may be subject to warranty, product recalls or product liability claims.

        If our products are defectively manufactured, contain defective components or are used in defective or malfunctioning systems, we could be subject to warranty and product liability claims and product recalls, safety alerts or advisory notices. While we have product liability insurance coverage, it may not be adequate to satisfy claims made against us. We also may be unable to obtain insurance in the future at satisfactory rates or in adequate amounts. Warranty and product liability claims or product recalls, regardless of their ultimate outcome, could have an adverse effect on our business, financial condition and reputation, and on our ability to attract and retain customers. In addition, we may determine that it is in our best interest to accept product returns in circumstances where we are not contractually obligated to do so in order to maintain good relations with our customers. Accepting product returns may negatively impact our operating results.

If we fail to protect our proprietary rights, our customers or our competitors might gain access to our proprietary designs, processes and technologies, which could adversely affect our operating results.

        We rely on a combination of patent protection, trade secret laws and restrictions on disclosure to protect our intellectual property rights. We have submitted a number of patent applications regarding our proprietary processes and technology. It is not certain when or if any of the claims in the remaining applications will be allowed. To date we have had only eighteen patents issued. We intend to continue filing patent applications with respect to most of the new processes and technologies that we develop. However, patent protection may not be available for some of these processes or technologies.

        It is possible that our efforts to protect our intellectual property rights may not:

•

prevent challenges to, or the invalidation or circumvention of, our existing intellectual property rights;



•

prevent our competitors from independently developing similar products, duplicating our products or designing around any patents that may be issued to us;



•

prevent disputes with third parties regarding ownership of our intellectual property rights;



•

prevent disclosure of our trade secrets and know-how to third parties or into the public domain;



•

result in valid patents, including international patents, from any of our pending or future applications; or



•

otherwise adequately protect our intellectual property rights.

        Others may attempt to reverse engineer, copy or otherwise obtain and use our proprietary technologies without our consent. Monitoring the unauthorized use of our technologies is difficult. We cannot be certain that the steps we have taken will prevent the unauthorized use of our technologies. This is particularly true in foreign countries, such as the PRC, where we have established a manufacturing facility and where the laws may not protect our proprietary rights to the same extent as applicable U.S. laws.

18

Table of Contents

        If some or all of the claims in our patent applications are not allowed, or if any of our intellectual property protections are limited in scope by a court or circumvented by others, we could face increased competition with regard to our products. Increased competition could significantly harm our business and our operating results.

We are involved in and expect to continue to be involved in costly legal and administrative proceedings to defend against claims that we infringe the intellectual property rights of others or to enforce or protect our intellectual property rights.

        As is common to the semiconductor industry, we have experienced substantial litigation regarding patent and other intellectual property rights. Lawsuits claiming that we are infringing others' intellectual property rights have been and may in the future be brought against us, and we are currently defending against claims of invalidity in the USPTO. See Note 9 of Notes to Consolidated Financial Statements, included in Part IV, Item 15 of this Report, for a description of our legal contingencies.

        The process of obtaining and protecting patents is inherently uncertain. In addition to the patent issuance process established by law and the procedures of the USPTO, we must comply with JEDEC administrative procedures in protecting our intellectual property within its industry standard setting process. These procedures evolve over time, are subject to variability in their application, and may be inconsistent with each other. Failure to comply with JEDEC's administrative procedures could jeopardize our ability to claim that our patents have been infringed.

        By making use of new technologies and entering new markets there is an increased likelihood that others might allege that our products infringe on their intellectual property rights. Litigation is inherently uncertain, and an adverse outcome in existing or any future litigation could subject us to significant liability for damages or invalidate our proprietary rights. An adverse outcome also could force us to take specific actions, including causing us to:

•

cease manufacturing and/or selling products, or using certain processes, that are claimed to be infringing a third party's intellectual property;



•

pay damages (which in some instances may be three times actual damages), including royalties on past or future sales;



•

seek a license from the third party intellectual property owner to use their technology in our products, which license may not be available on reasonable terms, or at all; or



•

redesign those products that are claimed to be infringing a third party's intellectual property.

        If any adverse ruling in any such matter occurs, any resulting limitations in our ability to market our products, or delays and costs associated with redesigning our products or payments of license fees to third parties, or any failure by us to develop or license a substitute technology on commercially reasonable terms could have a material adverse effect on our business, financial condition and results of operations.

        There is a limited pool of experienced technical personnel that we can draw upon to meet our hiring needs. As a result, a number of our existing employees have worked for our existing or potential competitors at some point during their careers, and we anticipate that a number of our future employees will have similar work histories. In the past, some of these competitors have claimed that our employees misappropriated their trade secrets or violated non-competition or non-solicitation agreements. Some of our competitors may threaten or bring legal action involving similar claims against us or our existing employees or make such claims in the future to prevent us from hiring qualified candidates. Lawsuits of this type may be brought, even if there is no merit to the claim, simply as a strategy to drain our financial resources and divert management's attention away from our business.

19

Table of Contents

        We also may find it necessary to litigate against others, including our competitors, customers and former employees, to enforce our intellectual property and contractual and commercial rights including, in particular, our trade secrets, as well as to challenge the validity and scope of the proprietary rights of others. We could become subject to counterclaims or countersuits against us as a result of this litigation. Moreover, any legal disputes with customers could cause them to cease buying or using our products or delay their purchase of our products and could substantially damage our relationship with them.

        Any litigation, regardless of its outcome, would be time consuming and costly to resolve, divert our management's time and attention and negatively impact our results of operations. We cannot assure you that current or future infringement claims by third parties or claims for indemnification by customers or end users of our products resulting from infringement claims will not be asserted in the future or that such assertions, if proven to be true, will not materially adversely affect our business, financial condition or results of operations.

If we are required to obtain licenses to use third party intellectual property and we fail to do so, our business could be harmed.

        Although some of the components used in our final products contain the intellectual property of third parties, we believe that our suppliers bear the sole responsibility to obtain any rights and licenses to such third party intellectual property. While we have no knowledge that any third party licensor disputes our belief, we cannot assure you that disputes will not arise in the future. The operation of our business and our ability to compete successfully depends significantly on our continued operation without claims of infringement or demands resulting from such claims, including demands for payments of money in the form of, for example, ongoing licensing fees.

        We are also developing products to enter new markets. Similar to our current products, we may use components in these new products that contain the intellectual property of third parties. While we plan to exercise precautions to avoid infringing on the intellectual property rights of third parties, we cannot assure you that disputes will not arise.

        If it is determined that we are required to obtain inbound licenses and we fail to obtain licenses, or if such licenses are not available on economically feasible terms, our business, operating results and financial condition could be significantly harmed.

The flash memory market is constantly evolving and competitive, and we may not have rights to manufacture and sell certain types of products utilizing emerging flash formats, or we may be required to pay a royalty to sell products utilizing these formats.

        The flash-based storage market is constantly undergoing rapid technological change and evolving industry standards. Many consumer devices, such as digital cameras, PDAs and smartphones, are transitioning to emerging flash memory formats, such as the Memory Stick, and xD Picture Card formats, which we do not currently manufacture and do not have rights to manufacture. Although we do not currently serve the consumer flash market, it is possible that certain OEMs may choose to adopt these higher-volume, lower-cost formats. This could result in a decline in demand, on a relative basis, for other products that we manufacture such as CompactFlash, SD and embedded USB drives. If we decide to manufacture flash memory products utilizing emerging formats such as those mentioned, we will be required to secure licenses to give us the right to manufacture such products that may not be available at reasonable rates or at all. If we are not able to supply flash card formats at competitive prices or if we were to have product shortages, our net sales could be adversely impacted and our customers would likely cancel orders or seek other suppliers to replace us.

20

Table of Contents

Our indemnification obligations for the infringement by our products of the intellectual property rights of others could require us to pay substantial damages.

        As is common in the industry, we currently have in effect a number of agreements in which we have agreed to defend, indemnify and hold harmless our customers and suppliers from damages and costs which may arise from the infringement by our products of third-party patents, trademarks or other proprietary rights. The scope of such indemnity varies, but may, in some instances, include indemnification for damages and expenses, including attorneys' fees. Our insurance does not cover intellectual property infringement. The term of these indemnification agreements is generally perpetual any time after execution of the agreement. The maximum potential amount of future payments we could be required to make under these indemnification agreements is unlimited. We may periodically have to respond to claims and litigate these types of indemnification obligations. Although our suppliers may bear responsibility for the intellectual property inherent in the components they sell to us, they may lack the financial ability to stand behind such indemnities. Additionally, it may be costly to enforce any indemnifications that they have granted to us. Accordingly, any indemnification claims by customers could require us to incur significant legal fees and could potentially result in the payment of substantial damages, both of which could result in a material adverse effect on our business and results of operations.

We depend on a few key employees, and if we lose the services of any of those employees or are unable to hire additional personnel, our business could be harmed.

        To date, we have been highly dependent on the experience, relationships and technical knowledge of certain key employees. We believe that our future success will be dependent on our ability to retain the services of these key employees, develop their successors, reduce our reliance on them, and properly manage the transition of their roles should departures occur. The loss of these key employees could delay the development and introduction of, and negatively impact our ability to sell our products and otherwise harm our business. We do not have employment agreements with any of these key employees other than Chun K. Hong, our President, Chief Executive Officer and Chairman of the Board. In 2010, we obtained "Key Man" life insurance on Chun K. Hong; however, we do not carry "Key Man" life insurance on any of our other key employees.

        Our future success also depends on our ability to attract, retain and motivate highly skilled engineering, manufacturing, and other technical and sales personnel. Competition for experienced personnel is intense. We may not be successful in attracting new engineers or other technical personnel, or in retaining or motivating our existing personnel. If we are unable to hire and retain engineers with the skills necessary to keep pace with the evolving technologies in our markets, our ability to continue to provide our current products and to develop new or enhanced products will be negatively impacted, which would harm our business. In addition, the shortage of experienced engineers, and other factors, may lead to increased recruiting, relocation and compensation costs for such engineers, which may exceed our expectations and resources. These increased costs may make hiring new engineers difficult, or may increase our operating expenses.

        Historically, a significant portion of our workforce has consisted of contract personnel. We invest considerable time and expense in training these contract employees. We may experience high turnover rates in our contract employee workforce, which may require us to expend additional resources in the future. If we convert any of these contract employees into permanent employees, we may have to pay finder's fees to the contract agency.

21

Table of Contents

We rely on third-party manufacturers' representatives and the failure of these manufacturers' representatives to perform as expected could reduce our future sales.

        We sell some of our products to customers through manufacturers' representatives. We are unable to predict the extent to which our manufacturers' representatives will be successful in marketing and selling our products. Moreover, many of our manufacturers' representatives also market and sell competing products. Our representatives may terminate their relationships with us at any time. Our future performance will also depend, in part, on our ability to attract additional manufacturers' representatives that will be able to market and support our products effectively, especially in markets in which we have not previously distributed our products. If we cannot retain our current manufacturers' representatives or recruit additional or replacement manufacturers' representatives, our sales and operating results will be harmed.

The operation of our manufacturing facility in the PRC could expose us to significant risks.

        During 2007, we invested significant time and effort in establishing a manufacturing facility in the PRC and preparing it for full-scale operations. This manufacturing facility became operational in July 2007 and was successfully qualified by certain key customers at that time. As of February 1, 2009, substantially all of our world-wide manufacturing production was being performed in the PRC. Language and cultural differences, as well as the geographic distance from our headquarters in Irvine, California, further compound the difficulties of running a manufacturing operation in the PRC. Our management has limited experience in creating or overseeing foreign operations, and this new facility may divert substantial amounts of their time. We cannot assure you that we will be able to maintain control over product quality, delivery schedules, manufacturing yields and costs as we increase our output. We also have to manage a local workforce that may subject us to uncertainties or regulatory policies and we remain subject to risks related to managing the increased production capacity provided by the facility. Should anticipated demand not materialize, the costs related to having excess capacity would have an adverse impact on our gross margins and operating results.

        Changes in the labor laws of the PRC could increase the cost of employing the local workforce. The increased industrialization of the PRC could also increase the price of local labor. Either of these factors could negatively impact the cost savings we currently enjoy from having our manufacturing facility in the PRC.

        In the future, some of our net sales may be denominated in Chinese Renminbi ("RMB"). The Chinese government controls the procedures by which RMB is converted into other currencies, and conversion of RMB generally requires government consent. As a result, RMB may not be freely convertible into other currencies at all times. If the Chinese government institutes changes in currency conversion procedures, or imposes restrictions on currency conversion, those actions may negatively impact our operations and could reduce our operating results. In addition, fluctuations in the exchange rate between RMB and U.S. dollars may adversely affect our expenses and results of operations as well as the value of our assets and liabilities. These fluctuations may also adversely affect the comparability of our period-to-period results. If we decide to declare dividends and repatriate funds from our Chinese operations, we will be required to comply with the procedures and regulations of applicable Chinese law. Any changes to these procedures and regulations, or our failure to comply with those procedures and regulations, could prevent us from making dividends and repatriating funds from our Chinese operations, which could adversely affect our financial condition. If we are able to make dividends and repatriate funds from our Chinese operations, these dividends would be subject to U.S. corporate income tax.

        The PRC currently provides for favorable tax rates for certain foreign-owned enterprises operating in specified locations in the PRC through 2012. We have established our PRC facility in such a tax-favored location. Should we fail to achieve profitability while favorable tax rates are in effect, or before our loss carryforwards in the PRC expire, it is possible that we would not realize the tax benefits to the extent originally anticipated and this could adversely impact our operating results.

22

Table of Contents

Economic, political and other risks associated with international sales and operations could adversely affect our net sales.

        Part of our growth strategy involves making sales to foreign corporations and delivering our products to facilities located in foreign countries. To facilitate this process and to meet the long-term projected demand for our products, we have set up a manufacturing facility in the PRC. Selling and manufacturing in foreign countries subjects us to additional risks not present with our domestic operations. We are operating in business and regulatory environments in which we have limited previous experience. We will need to continue to overcome language and cultural barriers to effectively conduct our operations in these environments. In addition, the economies of the PRC and other countries have been highly volatile in the past, resulting in significant fluctuations in local currencies and other instabilities. These instabilities affect a number of our customers and suppliers in addition to our foreign operations and continue to exist or may occur again in the future.

        International turmoil and the threat of future terrorist attacks, both domestically and internationally, have contributed to an uncertain political and economic climate, both in the U.S. and globally, and have negatively impacted the worldwide economy. The occurrence of one or more of these instabilities could adversely affect our foreign operations and some of our customers or suppliers, each of which could adversely affect our net sales. In addition, our failure to meet applicable regulatory requirements or overcome cultural barriers could result in production delays and increased turn-around times, which would adversely affect our business.

        Our international sales are subject to other risks, including regulatory risks, tariffs and other trade barriers, timing and availability of export licenses, political and economic instability, difficulties in accounts receivable collections, difficulties in managing distributors, lack of a significant local sales presence, difficulties in obtaining governmental approvals, compliance with a wide variety of complex foreign laws and treaties and potentially adverse tax consequences. In addition, the U.S. or foreign countries may implement quotas, duties, taxes or other charges or restrictions upon the importation or exportation of our products, leading to a reduction in sales and profitability in that country.

Our operations could be disrupted by power outages, natural disasters or other factors.

        Due to the geographic concentration of our manufacturing operations, a disruption resulting from equipment failure, power failures, quality control issues, human error, government intervention or natural disasters, including earthquakes, fires or floods, could interrupt or interfere with our manufacturing operations and consequently harm our business, financial condition and results of operations. Such disruptions would cause significant delays in shipments of our products and adversely affect our operating results.

Our failure to comply with environmental laws and regulations could subject us to significant fines and liabilities or cause us to incur significant costs.

        We are subject to various and frequently changing U.S. federal, state and local and foreign governmental laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the cleanup of contaminated sites and the maintenance of a safe workplace. In particular, some of our manufacturing processes may require us to handle and dispose of hazardous materials from time to time. For example, in the past our manufacturing operations have used lead-based solder in the assembly of our products. Today, we use lead-free soldering technologies in our manufacturing processes, as this is required for products entering the European Union. We could incur substantial costs, including clean-up costs, civil or criminal fines or sanctions and third-party claims for property damage or personal injury, as a result of violations of, or noncompliance with,

23

Table of Contents

environmental laws and regulations. These laws and regulations also could require us to incur significant costs to remain in compliance.

Our internal controls over financial reporting may not be effective, which could have a significant and adverse effect on our business.

        Section 404 of the Sarbanes-Oxley Act of 2002 and the rules and regulations of the SEC, which we collectively refer to as Section 404, require us to evaluate our internal controls over financial reporting to allow management to report on those internal controls as of the end of each year. Effective internal controls are necessary for us to produce reliable financial reports and are important in our effort to prevent financial fraud. In the course of our Section 404 evaluations, we may identify conditions that may result in significant deficiencies or material weaknesses and we may conclude that enhancements, modifications or changes to our internal controls are necessary or desirable. Implementing any such matters would divert the attention of our management, could involve significant costs, and may negatively impact our results of operations.

        We note that there are inherent limitations on the effectiveness of internal controls, as they cannot prevent collusion, management override or failure of human judgment. If we fail to maintain an effective system of internal controls or if management or our independent registered public accounting firm were to discover material weaknesses in our internal controls, we may be unable to produce reliable financial reports or prevent fraud, and it could harm our financial condition and results of operations, result in a loss of investor confidence and negatively impact our stock price.

If we do not effectively manage future growth, our resources, systems and controls may be strained and our results of operations may suffer.

        We have in the past expanded our operations, both domestically and internationally. Any future growth may strain our resources, management information and telecommunication systems, and operational and financial controls. To manage future growth effectively, including the expansion of volume in our manufacturing facility in the PRC, we must be able to improve and expand our systems and controls. We may not be able to do this in a timely or cost-effective manner, and our current systems and controls may not be adequate to support our future operations. In addition, our officers have relatively limited experience in managing a rapidly growing business or a public company. As a result, they may not be able to provide the guidance necessary to manage future growth or maintain future market position. Any failure to manage our growth or improve or expand our existing systems and controls, or unexpected difficulties in doing so, could harm our business.

If we acquire other businesses or technologies in the future, these acquisitions could disrupt our business and harm our operating results and financial condition.

        We will evaluate opportunities to acquire businesses or technologies that might complement our current product offerings or enhance our technical capabilities. We have no experience in acquiring other businesses or technologies. Acquisitions entail a number of risks that could adversely affect our business and operating results, including, but not limited to:

•

difficulties in integrating the operations, technologies or products of the acquired companies;



•

the diversion of management's time and attention from the normal daily operations of the business;



•

insufficient increases in net sales to offset increased expenses associated with acquisitions or acquired companies;



•

difficulties in retaining business relationships with suppliers and customers of the acquired companies;

24

Table of Contents

•

the overestimation of potential synergies or a delay in realizing those synergies;



•

entering markets in which we have no or limited experience and in which competitors have stronger market positions; and



•

the potential loss of key employees of the acquired companies.

        Future acquisitions also could cause us to incur debt or be subject to contingent liabilities. In addition, acquisitions could cause us to issue equity securities that could dilute the ownership percentages of our existing stockholders. Furthermore, acquisitions may result in material charges or adverse tax consequences, substantial depreciation, deferred compensation charges, in-process research and development charges, the amortization of amounts related to deferred stock-based compensation expense and identifiable purchased intangible assets or impairment of goodwill, any or all of which could negatively affect our results of operations.

Our existing indebtedness and any future indebtedness we incur could adversely affect our cash flow and prevent us from fulfilling our financial obligations.

        On September 30, 2010, we renewed our revolving credit agreement and concurrently obtained term loan financing. Incurring debt could have material consequences, such as:

•

requiring us to dedicate a portion of our cash flow from operations and other capital resources to debt service, thereby reducing our ability to fund working capital, capital expenditures, and other cash requirements;



•

increasing our vulnerability to adverse economic and industry conditions;



•

limiting our flexibility in planning for, or reacting to, changes and opportunities in, our business and industry, which may place us at a competitive disadvantage; and



•

limiting our ability to incur additional debt on acceptable terms, if at all.

        Additionally, if we are unable to maintain liquidity levels, as defined in the credit agreement, or if we were to default under our credit agreement and were unable to obtain a waiver for such a default, interest on the obligations would accrue at an increased rate. In the case of a default, the lenders could accelerate our obligations under the credit agreement; however, acceleration will be automatic in the case of bankruptcy and insolvency events of default.

        Additionally, to the extent we have made intercompany loans to our subsidiaries and have pledged such loans to the lenders under the credit agreement, our subsidiaries would be required to pay the amount of the intercompany loans to the lenders in the event we are in default under the credit agreement. Any actions taken by the lenders against us in the event we are in default under the credit agreement could harm our financial condition. Finally, the credit facility contains certain restrictive covenants, including provisions restricting our ability to incur additional indebtedness, guarantee certain obligations, create or assume liens and pay dividends.

Our investments in auction rate securities are subject to risks which may cause losses and affect the liquidity of these investments.

        We hold certain investments in auction rate securities that have failed, or may in the future fail, their respective auctions. An auction failure means that the parties wishing to sell their securities could not do so. As a result of failed auctions, our ability to liquidate and fully recover the carrying value of our investments in the near term may be limited or not exist. If the issuers of these investments are unable to close future auctions and their credit ratings deteriorate, we may in the future be required to record an impairment charge on these investments. We also may be required to wait until market stability is restored for these investments or until the final maturity of the underlying notes (up to 30 years) to realize our investments' cost value.

25

Table of Contents

Risks related to our common stock

Our principal stockholders have significant voting power and may take actions that may not be in the best interest of our other stockholders.

        As of January 1, 2011, our executive officers, directors and 5% stockholders beneficially own, in total, approximately 25% of our outstanding common stock. As a result, these stockholders, acting together, have the ability to exert substantial influence over all matters requiring approval by our stockholders, including the election and removal of directors and any proposed merger, consolidation or sale of all or substantially all of our assets and other corporate transactions. This concentration of control could be disadvantageous to other stockholders with interests different from those of our executive officers, directors and principal stockholders. For example, our executive officers, directors and principal stockholders could delay or prevent an acquisition or merger even if the transaction would benefit other stockholders. In addition, this significant concentration of share ownership may adversely affect the trading price for our common stock because investors may perceive disadvantages in owning stock in companies with stockholders that have the ability to exercise significant control.

Anti-takeover provisions under our charter documents and Delaware law could delay or prevent a change of control and could also limit the market price of our stock.

        Our certificate of incorporation and bylaws contain provisions that could delay or prevent a change of control of our company or changes in our board of directors that our stockholders might consider favorable. In addition, these provisions could limit the price that investors would be willing to pay in the future for shares of our common stock. The following are examples of provisions which are included in our certificate of incorporation and bylaws, each as amended:

•

our board of directors is authorized, without prior stockholder approval, to designate and issue preferred stock, commonly referred to as "blank check" preferred stock, with rights senior to those of our common stock;



•

stockholder action by written consent is prohibited;



•

nominations for election to our board of directors and the submission of matters to be acted upon by stockholders at a meeting are subject to advance notice requirements; and



•

our board of directors is expressly authorized to make, alter or repeal our bylaws.

        In addition, we are governed by the provisions of Section 203 of the Delaware General Corporate Law, which may prohibit certain business combinations with stockholders owning 15% or more of our outstanding voting stock. These and other provisions in our certificate of incorporation and bylaws, and of Delaware law, could make it more difficult for stockholders or potential acquirers to obtain control of our board of directors or initiate actions that are opposed by the then-current board of directors, including delaying or impeding a merger, tender offer, or proxy contest or other change of control transaction involving our company. Any delay or prevention of a change of control transaction or changes in our board of directors could prevent the consummation of a transaction in which our stockholders could receive a substantial premium over the then-current market price for their shares.

The price of and volume in trading of our common stock has and may continue to fluctuate significantly.

        Our common stock has been publicly traded since November 2006. The price of our common stock and the trading volume of our shares are volatile and have in the past fluctuated significantly. There can be no assurance as to the prices at which our common stock will trade in the future or that an active trading market in our common stock will be sustained in the future. The market price at which

26

Table of Contents

our common stock trades may be influenced by many factors, including but not limited to, the following:

•

our operating and financial performance and prospects, including our ability to achieve and sustain profitability in the future;



•

investor perception of us and the industry in which we operate;



•

the availability and level of research coverage of and market making in our common stock;



•

changes in earnings estimates or buy/sell recommendations by analysts;



•

general financial and other market conditions; and



•

changing and recently volatile domestic and international economic conditions.

        In addition, shares of our common stock and the public stock markets in general, have experienced, and may continue to experience, extreme price and trading volume volatility. These fluctuations may adversely affect the market price of our common stock and a shareholders ability to sell their shares into the market at the desired time or at the desired price.

        In 2007, following a drop in the market price of our common stock, securities litigation was initiated against us. Given the historic volatility of our industry, we may become engaged in this type of litigation in the future. Securities litigation is expensive and time-consuming.

Item 2.    Properties

        Our corporate headquarters is located in approximately 28,700 square feet of space in Irvine, California, under a lease that expires in June 2011. We also currently lease approximately 43,600 square feet of space for our manufacturing facility in the PRC. This lease expires March 2012. In addition, we lease offices on a monthly basis in a corporate office center located in San Jose, California.

        We believe that our current facilities are adequate for our current and expected operations for the next twelve months and that additional space can be obtained if needed.

Item 3.    Legal Proceedings

        The information set forth in the section entitled Patent Claims under Note 9 of Notes to Consolidated Financial Statements, included in Part IV, Item 15 of this Report is incorporated herein by reference.

27

Table of Contents

PART II

Item 5.    Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

        Our common stock began trading on The NASDAQ Global Market under the trading symbol "NLST" on November 30, 2006, and was not publicly traded prior to that date. The following table sets forth the high and low sale prices for our common stock on the NASDAQ Global Market for the periods indicated:

        As of February 15, 2011, there were approximately 58 holders of record of our common shares.

Dividend Policy

        We have never declared or paid cash dividends on our capital stock. Our current credit facility prohibits the payment of cash dividends. Accordingly, we do not anticipate declaring or paying cash dividends on our capital stock in the foreseeable future. Any payments of cash dividends will be at the discretion of our board of directors, and will depend upon our results of operations, earnings, capital requirements, legal and contractual restrictions, and other factors deemed relevant by our board of directors.

Securities Authorized for Issuance under Equity Compensation Plans

        Our board of directors and stockholders have previously approved our Amended and Restated 2000 Equity Incentive Plan and our Amended and Restated 2006 Equity Incentive Plan. Except as listed in the table below, we do not have any equity based plans, including individual compensation

28

Table of Contents

arrangements that have not been approved by our stockholders. The following table provides information as of January 1, 2011 with respect to our equity compensation plans:

29

Table of Contents

Item 7.    Management's Discussion and Analysis of Financial Condition and Results of Operations

        The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our audited consolidated financial statements and the related notes included elsewhere in this Form 10-K.

        This report contains forward-looking statements regarding future events and our future performance. These forward-looking statements involve risks and uncertainties that could cause actual results to differ materially from those expected or projected. These risks and uncertainties include, but are not limited to continuing development, qualification and volume production of NVvault™ and HyperCloud™ the rapidly-changing nature of technology; risks associated with intellectual property, including the costs and unpredictability of litigation over infringement of our property and the possibility of our patents being reexamined by the USPTO; volatility in the pricing of DRAM ICs and NAND; changes in and uncertainty of customer acceptance of, and demand for, our existing products and products under development, including uncertainty of and/or delays in product orders and product qualifications; delays in our and our customers' product releases and development; introductions of new products by competitors; changes in end-user demand for technology solutions; our ability to attract and retain skilled personnel; our reliance on suppliers of critical components and vendors in the supply chain; fluctuations in the market price of critical components; evolving industry standards; and the political and regulatory environment in the PRC. Other risks and uncertainties are described under the heading "Risk Factors" in Part I, Item IA of this Annual Report on Form 10-K. Except as required by law, we undertake no obligation to revise or update publicly any forward-looking statements for any reason.

Overview

        We design, manufacture and sell high-performance, intelligent memory subsystems for datacenter server and high-performance computing and communications markets. Our memory subsystems consist of combinations of DRAM ICs, NAND, ASICs and other components assembled on PCBs. We primarily market and sell our products to leading OEM customers. Our solutions are targeted at applications where memory plays a key role in meeting system performance requirements. We leverage a portfolio of proprietary technologies and design techniques, including efficient planar design, alternative packaging techniques and custom semiconductor logic, to deliver memory subsystems with high memory density, small form factor, high signal integrity, attractive thermal characteristics and low cost per bit.

Recent Developments

        In November 2009, we introduced HyperCloud™ DDR3 memory technology. HyperCloud™ utilizes an ASIC chipset that incorporates Netlist patented rank multiplication technology that increases memory capacity and load reduction functionality that increases memory bandwidth. We expect that this technology will make possible improved levels of performance for memory intensive datacenter applications and workloads, including enterprise virtualization, cloud computing infrastructure, business intelligence real-time data analytics, and high performance computing. HyperCloud™ memory is being evaluated by several of our OEM customers for use in their server products. HyperCloud™ is interoperable with JEDEC standard DDR3 memory modules. Our HyperCloud™ products are designed to allow for installation in servers without the need for a BIOS change. As such, their anticipated sales launch is not dependent on the design plans or product cycle of our OEM customers. However, we have experienced a longer qualification cycle than anticipated. As of January 1, 2011, we have not shipped any production quantities of HyperCloud™.

        In February 2010, we announced general availability of NVvault™ battery-free, a non-volatile cache memory subsystem targeting RAID storage applications. NVvault™ battery-free provides server and storage OEMs a solution for enhanced datacenter fault recovery. Unlike our traditional

30

Table of Contents

battery-powered fault tolerant cache product which relied solely on batteries to power the cache, NVvault™ battery-free utilizes a combination of DRAM for high throughput performance and flash for extended data retention. The introduction of NVvault™ battery-free, as well as the launch of the current version of the battery-powered module in connection with Dell introduction of the PERC 7 line of servers in December 2009, has resulted in RAID controller subsystem revenues of $20.2 million, or 54% of total revenues for 2010, including $4.8 million of NVvault™. This compares favorably with $7.3 million in RAID controller subsystem revenues, or 40% of total revenues for 2009. Although revenues in 2010 have been primarily for shipments to Dell, in the fourth quarter of 2010 we qualified NVvault™ battery-free with other OEMs. We also intend to pursue end-user opportunities.

        The remainder of our revenues arose primarily from OEM sales of custom memory modules, the majority of which were utilized in data center and industrial applications. When developing custom modules for an equipment product launch, we engage with our OEM customers from the earliest stages of new product definition, providing us unique insight into their full range of system architecture and performance requirements. This close collaboration has also allowed us to develop a significant level of systems expertise. We leverage a portfolio of proprietary technologies and design techniques, including efficient planar design, alternative packaging techniques and custom semiconductor logic, to deliver memory subsystems with high speed, capacity and signal integrity, small form factor, attractive thermal characteristics and low cost per bit. Revenues from custom modules have improved as a result of OEM product placements on new platforms and improved economic conditions compared with 2009. The continuation of this trend, which cannot be assured, is dependent on our ability to qualify our memory modules on new platforms as current platforms reach the end of their life cycles, and on the state of the global economy.

        Consistent with the concentrated nature of the OEM customer base in our target markets, a small number of large customers have historically accounted for a significant portion of our net sales. Two customers represented approximately 59% and 19%, respectively, of our net sales in 2010, and approximately 53% and 13%, respectively, of our net sales in 2009.

Key Business Metrics

        The following describes certain line items in our consolidated statements of operations that are important to management's assessment of our financial performance:

        Net Sales.    Net sales consist primarily of sales of our high performance memory subsystems, net of a provision for estimated returns under our right of return policies, which generally range up to 30 days. We generally do not have long-term sales agreements with our customers. Although OEM customers typically provide us with non-binding forecasts of future product demand over specific periods of time, they generally place orders with us approximately two weeks in advance of scheduled delivery. Selling prices are typically negotiated monthly, based on competitive market conditions and the current price of DRAM ICs and NAND. Purchase orders generally have no cancellation or rescheduling penalty provisions. We often ship our products to our customers' international manufacturing sites. All of our sales to date, however, are denominated in U.S. dollars. We also sell excess component inventory of DRAM ICs and NAND to distributors and other users of memory ICs. As compared to previous years, component inventory sales remain a relatively small percentage of net sales as a result of our efforts to diversify both our customer and product line bases. This diversification effort has also allowed us to use components in a wider range of memory subsystems. We expect that component inventory sales will continue to represent a minimal portion of our net sales in future periods.

        Cost of Sales.    Our cost of sales includes the cost of materials, manufacturing costs, depreciation and amortization of equipment, inventory valuation provisions, stock-based compensation, and occupancy costs and other allocated fixed costs. The DRAM ICs and NAND incorporated into our

31

Table of Contents

products constitute a significant portion of our cost of sales, and thus our cost of sales will fluctuate based on the current price of DRAM ICs and NAND. We attempt to pass through such DRAM IC and NAND flash memory cost fluctuations to our customers by frequently renegotiating pricing prior to the placement of their purchase orders. However, the sales prices of our memory subsystems can also fluctuate due to competitive situations unrelated to the pricing of DRAM ICs and NAND, which affects gross margins. The gross margin on our sales of excess component DRAM IC and NAND inventory is much lower than the gross margin on our sales of our memory subsystems. As a result, fluctuations in DRAM IC and NAND inventory sales as a percentage of our overall sales could impact our overall gross margin. We assess the valuation of our inventories on a quarterly basis and record a provision to cost of sales as necessary to reduce inventories to the lower of cost or net realizable value.

        Research and Development.    Research and development expense consists primarily of employee and independent contractor compensation and related costs, stock-based compensation, non-recurring engineering fees, computer-aided design software licenses, reference design development costs, patent filing and protection legal fees, depreciation or rental of evaluation equipment, and occupancy and other allocated overhead costs. Also included in research and development expense are the costs of material and overhead related to the production of engineering samples of new products under development or products used solely in the research and development process. Our customers typically do not separately compensate us for design and engineering work involved in developing application-specific products for them. All research and development costs are expensed as incurred. We anticipate that research and development expenditures will increase in future periods as we seek to expand new product opportunities, increase our activities related to new and emerging markets and continue to develop additional proprietary technologies.

        Selling, General and Administrative.    Selling, general and administrative expenses consist primarily of employee salaries and related costs, stock-based compensation, independent sales representative commissions, professional services, promotional and other selling and marketing expenses, and occupancy and other allocated overhead costs. A significant portion of our selling effort is directed at building relationships with OEMs and other customers and working through the product approval and qualification process with them. Therefore, the cost of material and overhead related to products manufactured for qualification is included in selling expenses. As we continue to service existing and establish new customers, we anticipate that our sales and marketing expenses will increase.

Critical Accounting Policies

        The preparation of our consolidated financial statements in conformity with accounting principles generally accepted in the U.S. requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of net sales and expenses during the reporting period. By their nature, these estimates and assumptions are subject to an inherent degree of uncertainty. We base our estimates on our historical experience, knowledge of current conditions and our beliefs of what could occur in the future considering available information. We review our estimates on an on-going basis. Actual results may differ from these estimates, which may result in material adverse effects on our operating results and financial position. We believe the following critical accounting policies involve our more significant assumptions and estimates used in the preparation of our consolidated financial statements:

        Revenue Recognition.    We recognize revenues in accordance with the Financial Accounting Standards Board ("FASB") Accounting Standards Codification ("ASC") Topic 605. Accordingly, we recognize revenues when there is persuasive evidence that an arrangement exists, product delivery and acceptance have occurred, the sales price is fixed or determinable, and collectibility of the resulting receivable is reasonably assured.

32

Table of Contents

        We generally use customer purchase orders and/or contracts as evidence of an arrangement. Delivery occurs when goods are shipped for customers with FOB Shipping Point terms and upon receipt for customers with FOB Destination terms, at which time title and risk of loss transfer to the customer. Shipping documents are used to verify delivery and customer acceptance. We assess whether the sales price is fixed or determinable based on the payment terms associated with the transaction and whether the sales price is subject to refund. Customers are generally allowed limited rights of return for up to 30 days, except for sales of excess component inventories, which contain no right-of-return privileges. Estimated returns are provided for at the time of sale based on historical experience or specific identification of an event necessitating a reserve. We offer a standard product warranty to our customers and have no other post-shipment obligations. We assess collectibility based on the creditworthiness of the customer as determined by credit checks and evaluations, as well as the customer's payment history.

        All amounts billed to customers related to shipping and handling are classified as net sales, while all costs incurred by us for shipping and handling are classified as cost of sales.

        Fair Value of Financial Instruments.    Our financial instruments consist principally of cash and cash equivalents, investments in marketable securities, accounts receivable, accounts payable, accrued expenses and debt instruments. Other than for certain investments in auction rate securities, commercial paper and short-term corporate bonds, the fair value of our cash equivalents and investments in marketable securities is determined based on quoted prices in active markets for identical assets or Level 1 inputs. Because of their short-term nature, commercial paper and short-term corporate bonds are not frequently traded. Although there are observable quotes for these securities, the markets are not considered active. Accordingly, the fair values of these investments are based on Level 2 inputs. The fair value of our auction rate securities is determined based on Level 3 inputs. We recognize transfers between Levels 1 through 3 of the fair value hierarchy at the beginning of the reporting period. We believe that the carrying values of all other financial instruments approximate their current fair values due to their nature and respective durations.

        Allowance for Doubtful Accounts.    We perform credit evaluations of our customers' financial condition and limit the amount of credit extended to our customers as deemed necessary, but generally require no collateral. We evaluate the collectibility of accounts receivable based on a combination of factors. In cases where we are aware of circumstances that may impair a specific customer's ability to meet its financial obligations subsequent to the original sale, we will record an allowance against amounts due, and thereby reduce the net recognized receivable to the amount that we reasonably believe will be collected. For all other customers, we record allowances for doubtful accounts based primarily on the length of time the receivables are past due based on the terms of the originating transaction, the current business environment and our historical experience. Uncollectible accounts are charged against the allowance for doubtful accounts when all cost effective commercial means of collection have been exhausted. Generally, our credit losses have been within our expectations and the provisions established. However, we cannot guarantee that we will continue to experience credit loss rates similar to those we have experienced in the past.

        Our accounts receivable are highly concentrated among a small number of customers, and a significant change in the liquidity or financial position of one of these customers could have a material adverse effect on the collectability of our accounts receivable, our liquidity and our future operating results.

        Inventories.    We value our inventories at the lower of the actual cost to purchase or manufacture the inventory or the net realizable value of the inventory. Cost is determined on an average cost basis which approximates actual cost on a first-in, first-out basis and includes raw materials, labor and manufacturing overhead. At each balance sheet date, we evaluate ending inventory quantities on hand and record a provision for excess quantities and obsolescence. Among other factors, we consider

33

Table of Contents

historical demand and forecasted demand in relation to the inventory on hand, competitiveness of product offerings, market conditions and product life cycles when determining obsolescence and net realizable value. In addition, we consider changes in the market value of DRAM ICs and NAND in determining the net realizable value of our raw material inventory. Once established, any write downs are considered permanent adjustments to the cost basis of our excess or obsolete inventories.

        A significant decrease in demand for our products could result in an increase in the amount of excess inventory quantities on hand. In addition, our estimates of future product demand may prove to be inaccurate, in which case we may have understated or overstated the provision required for excess and obsolete inventory. In the future, if our inventories are determined to be overvalued, we would be required to recognize additional expense in our cost of sales at the time of such determination. Likewise, if our inventories are determined to be undervalued, we may have over-reported our costs of sales in previous periods and would be required to recognize additional gross profit at the time such inventories are sold. In addition, should the market value of DRAM ICs or NAND decrease significantly, we may be required to lower our selling prices to reflect the lower current cost of our raw materials. If such price decreases reduce the net realizable value of our inventories to less than our cost, we would be required to recognize additional expense in our cost of sales in the same period. Although we make every reasonable effort to ensure the accuracy of our forecasts of future product demand, any significant unanticipated changes in demand, technological developments or the market value of DRAM ICs or NAND could have a material effect on the value of our inventories and our reported operating results.

        Impairment of Long-Lived Assets.    We evaluate the recoverability of the carrying value of long-lived assets held and used in our operations for impairment on at least an annual basis or whenever events or changes in circumstances indicate that their carrying value may not be recoverable. When such factors and circumstances exist, we compare the projected undiscounted future net cash flows associated with the related asset or group of assets over their estimated useful lives against their respective carrying amount. These projected future cash flows may vary significantly over time as a result of increased competition, changes in technology, fluctuations in demand, consolidation of our customers and reductions in average selling prices. If the carrying value is determined not to be recoverable from future operating cash flows, the asset is deemed impaired and an impairment loss is recognized to the extent the carrying value exceeds the estimated fair value of the asset. The fair value of the asset or asset group is based on market value when available, or when unavailable, on discounted expected cash flows.

        Warranty Reserve.    We offer product warranties generally ranging from one to three years, depending on the product and negotiated terms of purchase agreements with our customers. Such warranties require us to repair or replace defective product returned to us during the warranty period at no cost to the customer. Warranties are not offered on sales of excess inventory. Our estimates for warranty-related costs are recorded at the time of sale based on historical and estimated future product return rates and expected repair or replacement costs. While such costs have historically been consistent between periods and within our expectations and the provisions established, unexpected changes in failure rates could have a material adverse impact on us, requiring additional warranty reserves, and adversely affecting our gross profit and gross margins.

        Stock-Based Compensation.    We account for equity issuances to non-employees in accordance with ASC Topic 505. All transactions in which goods or services are the consideration received for the issuance of equity instruments are accounted for based on the fair value of the consideration received or the fair value of the equity instrument issued, whichever is more reliably measurable. The measurement date used to determine the fair value of the equity instrument issued is the earlier of the date on which the third-party performance is complete or the date on which it is probable that performance will occur.

34

Table of Contents

        In accordance with ASC Topic 718, employee and director stock-based compensation expense recognized during the period is based on the value of the portion of stock-based payment awards that is ultimately expected to vest during the period. Given that stock-based compensation expense recognized in the consolidated statements of operations is based on awards ultimately expected to vest, it has been reduced for estimated forfeitures. ASC Topic 718 requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. Our estimated average forfeiture rates are based on historical forfeiture experience and estimated future forfeitures.

        The fair value of common stock option awards to employees and directors is calculated using the Black-Scholes option pricing model. The Black-Scholes model requires subjective assumptions regarding future stock price volatility and expected time to exercise, along with assumptions about the risk-free interest rate and expected dividends, all of which affect the estimated fair values of our common stock option awards. The expected term of options granted is calculated as the average of the weighted vesting period and the contractual expiration date of the option. This calculation is based on the safe harbor method permitted by the SEC in instances where the vesting and exercise terms of options granted meet certain conditions and where limited historical exercise data is available. The expected volatility is based on the historical volatility of our common stock. The risk-free rate selected to value any particular grant is based on the U.S. Treasury rate that corresponds to the expected term of the grant effective as of the date of the grant. The expected dividends assumption is based on our history and our expectations regarding dividend payouts. We evaluate the assumptions used to value our common stock option awards on a quarterly basis. If factors change and we employ different assumptions, stock-based compensation expense may differ significantly from what we have recorded in prior periods. Compensation expense for common stock option awards with graded vesting schedules is recognized on a straight-line basis over the requisite service period for the last separately vesting portion of the award, provided that the accumulated cost recognized as of any date at least equals the value of the vested portion of the award.

        We recognize the fair value of restricted stock awards issued to employees and outside directors as stock-based compensation expense on a straight-line basis over the vesting period for the last separately vesting portion of the awards. Fair value is determined as the difference between the closing price of our common stock on the grant date and the purchase price of the restricted stock award, if any, reduced by expected forfeitures.

        If there are any modifications or cancellations of the underlying vested or unvested stock-based awards, we may be required to accelerate, increase or cancel any remaining unearned stock-based compensation expense, or record additional expense for vested stock-based awards. Future stock-based compensation expense and unearned stock- based compensation may increase to the extent that we grant additional common stock options or other stock-based awards.

        Income Taxes.    Deferred tax assets and liabilities are recognized to reflect the estimated future tax effects of future deductible or taxable amounts attributable to events that have been recognized on a cumulative basis in the consolidated financial statements, calculated at enacted tax rates for expected periods of realization. We regularly review our deferred tax assets for recoverability and establish a valuation allowance, when determined necessary, based on historical taxable income, projected future taxable income, and the expected timing of the reversals of existing temporary differences. Because we have operated at a loss for an extended period of time, we did not recognize tax deferred tax assets related to losses incurred in 2009. Benefits recognized in 2010 were limited to those made available as a one-time carry-back through economic recovery legislation. In the future, if we realize a deferred tax asset that currently carries a valuation allowance, we may record an income tax benefit or a reduction to income tax expense in the period of such realization.

35

Table of Contents

        ASC Topic 740 prescribes a recognition threshold and measurement requirement for the financial statement recognition of a tax position that has been taken or is expected to be taken on a tax return and also provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. Under ASC Topic 740 we may only recognize or continue to recognize tax positions that meet a "more likely than not" threshold.

        The application of tax laws and regulations is subject to legal and factual interpretation, judgment and uncertainty. Tax laws and regulations themselves are subject to change as a result of changes in fiscal policy, changes in legislation, the evolution of regulations and court rulings. Therefore, the actual liability for U.S. or foreign taxes may be materially different from our estimates, which could result in the need to record additional tax liabilities or potentially reverse previously recorded tax liabilities.

Results of Operations

        The following table sets forth our consolidated statements of operations as a percentage of net sales for the years indicated:

36

Table of Contents