NORTECH SYSTEMS INC - Annual Report: 2019 (Form 10-K)

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Proxy Statement for the 2019 Annual Shareholders’ Meeting have been incorporated by reference into Part III of this Form 10-K. The Proxy Statement is expected to be filed with the Securities and Exchange Commission (the SEC) within 120 days after December 31, 2019, the end of our fiscal year.

(The remainder of this page was intentionally left blank)

NORTECH SYSTEMS INCORPORATED

ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

NORTECH SYSTEMS INCORPORATED

FORM 10-K

For the Year Ended December 31, 2019

PART I

Item 1. Business

General

Nortech Systems, Inc., (“the Company”, “we”, “our”) organized in December 1990, is an Electronic Manufacturing Services (“EMS”) company headquartered in Maple Grove, Minnesota, a suburb of Minneapolis, Minnesota. We maintain facilities and operations in Minnesota in the United States; Monterrey, Mexico; and Suzhou, China. We offer a full range of value-added engineering, technical and manufacturing services and support including project management, designing, testing, prototyping, manufacturing, supply chain management and post-market services. Our manufacturing and engineering services include complete medical devices, printed circuit board assemblies, wire and cable assemblies, and complex higher-level electromechanical assemblies. The majority of our revenue is derived from products built to the customer's design specifications.

Our breadth of manufacturing, technical expertise and experience make us attractive to our broad customer base. Our customers are original equipment manufacturers (“OEMs”) in the Aerospace and Defense, Medical and Industrial markets. The diversity in the markets we serve is an advantage in dealing with the effects of fluctuations from the economy and competition. In the design phase, we provide technical support, subject matter expertise in design for manufacturing and testing capabilities that allow our customer programs to get to production faster while meeting both their quality and cost requirements. Our customers rely on our experience and capabilities in manufacturing and supply chain to manage and reduce cost over the life cycle of their products. This requires a strong relationship with our customers based on a trusting partnership as we perform as an extension of their operations.

All of our facilities are certified to one or more of the industry standards, including International Standards Organization (“ISO”) 9001, ISO 13485, and Aerospace Systems (“AS”) 9100, with most having additional certifications based on the needs of the customers they serve. In addition to industry standard certifications we actively manage quality metrics throughout product life-cycle at all levels of the organization to provide real-time, pro-active support to our customers and their projects. Process validation is performed through the strict phases of installation qualification, operation qualification and performance qualification.

Business Segment

All of our operations fall under the Contract Manufacturing segment within the EMS industry. We strategically direct production between our various manufacturing facilities based on a number of considerations to best meet our customers’ needs. We share resources for sales, marketing, engineering, supply chain, information services, human resources, payroll, and all corporate accounting functions. Our financial information is consolidated and evaluated regularly by the chief operating decision maker in assessing performance and allocating resources.

Business Strategy

The EMS industry has evolved into a dynamic, high-tech, regulated global electronics contract services industry. We continue to expand our capabilities and footprint to better meet these changing market requirements. Along with offering technical expertise in our quality processes, engineering design applications and testing, we are also increasing our focus on supplier-managed inventory services and the cost drivers throughout the global supply chain. We continue to transform our business model from one that is less transactional and price/commodity driven to a solution based model focused on value added services. We continue to pursue strategic opportunities that may include acquisitions, mergers, and/or joint ventures with complementary companies to expand our service offering, advance our competitive edge, grow our customer base and increase revenues. Our strategic objectives and our history have been based on both organic and acquired growth.

Our quality systems and processes are based on ISO standards with all facilities certified to ISO 9001 and/or AS9100 standards. We also have ISO 13485 certification which recognizes our quality management systems applicable to contract design, manufacture and repair of assemblies for the medical industry. Our Milaca operation is a U.S. Food and Drug Administration (“FDA”) registered facility. These certifications and registrations provide our customers assurance of our capabilities and proven processes.

We are committed to quality, cost effectiveness and responsiveness to customer requirements. To achieve these objectives we have invested in Restriction of Hazardous Substances (lead free) processing, equipment, plant capacity studies, people, enterprise resource planning systems, lean manufacturing and supply chain management techniques at our facilities. We are committed to continuous improvement and have invested in training our people to identify and act on improvement opportunities. We maintain a diversified customer base and expand into other capabilities and services when there is a fit with our core competencies and strategic vision.

Marketing

We concentrate our marketing efforts in the Aerospace and Defense, Medical and Industrial markets. Our marketing strategy emphasizes our breadth, expertise and experience in each of our markets. Our expertise helps our customers save time and money and also reduces their risks. The breadth of our manufacturing, supply chain, engineering services and complete turnkey solutions assist our customers in getting their products to market quickly while managing the total cost solution. Our strength is managing low to moderate volume components and assemblies with high mix customer demand. This requires us to have close customer relationships and operational flexibility to manage the variation of product demands.

Our customer emphasis continues to be on companies that require an electronic manufacturing partner with a high degree of manufacturing and quality sophistication, including statistical process control, statistical quality control, ISO standards, Military Specifications, AS9100 and FDA facility registration. We continue efforts to penetrate our existing customer base and expand market opportunities with participation in industry forums and selected trade shows. We target customers who value proven manufacturing performance, design, project management and application engineering expertise and who value the flexibility to manage the supply chain of a high mix of products and services. We market our services through a mix of traditional marketing outreach, a specialized business development team and independent manufacturers' representatives. For more information on our marketing and service offerings see our web site at nortechsys.com. The information on our company’s website is not part of this filing.

Sources and Availability of Materials

We currently purchase the majority of our electronic components globally and directly from electronic component manufacturers and large electronic distributors. On occasion, some of our components may be placed on a stringent allocation basis; however, we are not currently experiencing any major material purchasing or availability problems.

Major Customers

Our largest customer has two divisions that together accounted for approximately 22.5% and 23.2% of net sales for the years ended December 31, 2019 and 2018, respectively. One division accounted for approximately 19.9% and 20.8% of net sales for the years ended December 31, 2019 and 2018, respectively. The second division accounted for approximately 2.6% and 2.4% of net sales for the years ended December 31, 2019 and 2018, respectively.

Patents and Licenses

Our success depends on our technical expertise, trade secrets, supply chain and manufacturing skills. However, during the normal course of business we have obtained or developed proprietary product requiring licensing, patent, copyright or trademark protection.

Competition

The contract manufacturing EMS industry's competitive makeup includes small closely held contract manufacturing companies, large global full-service contract manufacturers, company-owned in-house manufacturing facilities and foreign contract manufacturers. We do not believe that the small closely held operations pose a significant competitive threat in the markets and customers we serve, as they generally do not have the complete manufacturing and engineering services or capabilities required by our target customers. We do believe the larger global full service and foreign manufacturers are more focused on higher volume customer engagements and we do not see them as our primary competition. We continue to see opportunities with OEM companies that have their own in-house electronic manufacturing capabilities as they evaluate their internal costs and investments against outsourcing to contract manufacturers like us. We do see trends of the low volume, high mix customer demand going to a regional supply base. This is a good fit with our operations in US, Mexico and Asia. We continue to study and investigate other regions and global alternatives to meet our competitive challenges and customer requirements.

Research and Development

We perform research and development for customers on an as requested, project and program basis for development of conceptual engineering and design activities as well as products moving into production. While we did not expend significant dollars in 2019 or 2018 on Company-sponsored product research and development, we continue to explore opportunities for developing proprietary manufacturing methods or products.

Environmental Law Compliance

We believe that our manufacturing facilities are currently operating in compliance with local, state, and federal environmental laws. We plan to continue acquiring environmental-oriented equipment and incurring the expenditures we deem necessary for compliance with applicable laws. Expenditures relating to compliance for operating facilities incurred in the past have not significantly affected our capital expenditures, earnings or competitive position.

Government Regulation

As a medical device manufacturer, we have additional compliance requirements. We are required to register with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation (“QSR”) requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections and product field monitoring by the FDA. To support the quality requirements of our Aerospace and Defense market customers, our Blue Earth facility is International Traffic in Arms Regulations (“ITAR”) registered.

Employees

We have 687 full-time and 97 part-time/temporary employees as of December 31, 2019. Manufacturing personnel, including direct, indirect support and sales functions, comprise 747 employees, while general administrative employees total 37.

Foreign Operations and Export Sales from Our Domestic Operations

We have leased manufacturing facilities in Monterrey, Mexico and Suzhou, China with approximately $961,000 and $596,000 in long-term assets and $3,425,000 and $189,000 of Right of Use Assets at December 31, 2019, respectively. Export sales from our domestic operations represented 3.1% and 4.8% of net sales the years ended December 31, 2019 and 2018, respectively.

Available Information

Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and any amendments to those reports are available free of charge, as soon as reasonably practicable, after we electronically file such material with, or furnish it to, the United States Securities and Exchange Commission ("SEC"). These reports are available on our website at http://www.nortechsys.com and on the SEC's website at http://www.sec.gov. Information included on our website is not deemed to be incorporated into this Annual Report on Form 10-K.

Item 1A. Risk Factors

In evaluating our Company, careful consideration should be given to the following risk factors, in addition to the other information included in this Annual Report on Form 10-K. Each of these risk factors could adversely affect our business, operating results and/or financial condition, as well as adversely affect the value of an investment in our common stock. In addition to the following disclosures, please refer to the other information contained in this report, including our consolidated financial statements and the related notes.

The economic conditions around the world could adversely affect demand for our products and services and the financial health of our customers.

Demand for our products and services depends upon worldwide economic conditions, including but not limited to overall economic growth rates, construction, consumer spending, financing availability, employment rates, interest rates, inflation, consumer confidence, defense spending levels, and the profits, capital spending, and liquidity of industrial companies.

An economic downturn or financial market turmoil may depress demand for our equipment in all major geographies and markets. If our original equipment manufacturers are unable to purchase our products because of unavailable credit or unfavorable credit terms, depressed end-user demand, or are simply unwilling to purchase our products, our net sales and earnings will be adversely affected. Also, we are subject to the risk that our customers will have financial difficulties, which could harm their ability to satisfy their obligation to pay accounts receivable. Further, an economic downturn may affect our ability to satisfy the financial covenants in the terms of our financing arrangements.

We operate in the highly competitive EMS industry and we depend on continuing outsourcing by OEMs.

We compete against many EMS companies. The larger global competitors have more resources and greater economies of scale and have more geographically diversified international operations. We also compete with OEM operations that are continually evaluating manufacturing products internally against the advantages of outsourcing or delaying their decision to outsource. We may also be at a competitive disadvantage with respect to price when compared to manufacturers with excess capacity, lower cost structures and availability of lower cost labor.

Competitive factors in our targeted markets are believed to be quality, the ability to meet delivery schedules, customer service, value-added engineering, technology solutions, geographic location and price. We also expect that our competitors will continue to improve the performance of their current products or services, to reduce their current products or service sales prices and improve services that maybe offered. Any of these could cause a decline in sales, loss of market share, or lower profit margin.

The availability of excess manufacturing capacity of our competitors also creates competitive pressure on price and winning new business. We must continue to provide a quality product, be responsive and flexible to customers’ requirements, and deliver to customers’ expectations. Our lack of execution could have an adverse effect on our results of operations and financial condition.

We offer a full range of value-added engineering, technical and manufacturing services and support including project management, designing, testing, prototyping, manufacturing, supply chain management and post-market services.

Our engineering revenue depends on our ability to deliver quality value-added engineering services required by our customers in the future. 

The markets for our engineering services are characterized by rapidly changing technology and evolving process development. The continued success of our business will depend upon our ability to hire and retain qualified engineering personnel and maintain and enhance our technological leadership. Although we believe that we currently have the ability to provide the value-added engineering services that is required by our customers, there is no certainty that we will develop the capabilities required by our customers in the future. The emergence of new technology, industry standards or customer requirements may render the engineering services we currently provide obsolete or uncompetitive. The acquisition and implementation of new engineering knowledge and technical skills may require significant expense that could adversely affect our operating results, as could our failure to anticipate and adapt to our customers’ changing technological requirements.

We may not meet regulatory quality standards applicable to our manufacturing and quality processes which could have an adverse effect on our business.

We are registered with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s QSR requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. We are also ITAR registered which is required for our manufacturing of defense related products. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections and product field monitoring. If any inspection reveals noncompliance with these regulations, it could adversely affect our operations.

A large percentage of our sales have been made to a small number of customers, and the loss of a major customer, if not replaced, would adversely affect us.

Our largest customer has two divisions that account for 22.5% and 23.2% of net sales for the years ended December 31, 2019 and 2018, respectively. The loss of a substantial portion of net sales to our largest customers could have a material adverse effect on us.

We are dependent on suppliers for electronic components and may experience shortages, extended lead times, cost premiums and shipment delays that would adversely affect our customers and us.

We purchase raw materials, commodities and components for use in our production. Increased costs of these materials could have an adverse effect on our production costs if we are unable to pass along price increases or reduce the other cost of goods produced through cost improvement initiatives. Fuel and energy cost increases could also adversely affect our freight and operating costs. Due to customer specifications and requirements, we are dependent on suppliers to provide critical electronic components and materials for our operations that could result in shortages of some of the electronic components needed for their production. Component shortages may result in expedited freight, overtime premiums and increased component costs. In addition to the financial impact on operations from lost revenue and increased cost, there could potentially be harm to our customer relationships.

Our customers cancel orders, change order quantity, timing and specifications that if not managed would have an adverse effect on inventory carrying costs.

We face, through the normal course of business, customer cancellations and rescheduled orders and are not always successful in recovering the costs of such cancellations or rescheduling. In addition, excess and obsolete inventory losses as a result of customer order changes, cancellations, product changes and contract termination could have an adverse effect on our operations. We estimate and reserve for any known or potential impact from these possibilities.

Our exposure to financially troubled customers or suppliers may adversely affect our financial results.

We provide manufacturing services to companies and industries that have in the past, and may in the future, experience financial difficulty. If our customers experience financial difficulty, we could have difficulty recovering amounts owed to us from these customers, or demand for our products from these customers could decline. Additionally, if our suppliers experience financial difficulty, we could have difficulty sourcing supply necessary to fulfill production requirements and meet scheduled shipments. If one or more of our customers were to become insolvent or otherwise were unable to pay for the services provided by us on a timely basis, or at all, our operating results and financial condition could be adversely affected. Such adverse effects could include one or more of the following: an increase in our provision for doubtful accounts, a charge for inventory write-offs, a reduction in revenue, and an increase in our working capital requirements due to higher inventory levels and increases in days our accounts receivables are outstanding.

Some shareholders may be able to take actions that do not reflect the will or best interests of other shareholders.

Our officers and directors control a majority share of our outstanding common stock and could individually or together exert a significant degree of influence over our affairs.

The manufacture and sale of our products carries potential risk for product liability claims.

We represent and warrant the goods and services we deliver are free from defects in material and workmanship for one year from ship date. We make no other guarantees or warranties, expressed or implied, of any nature whatsoever as to the goods including without limitation, warranties to merchantability, fit for a particular purpose, non-infringement of patent or the like unless agreed upon in writing. If a product liability claim, results in our being liable and the amount is in excess of our insurance coverage or there is no insurance coverage for the claim then it could have an adverse effect on our business and financial position.

Complying with securities laws, tax laws, accounting policies and regulations, and subsequent changes, may be costly for us and adversely affect our financial statements.

New or changing laws, regulations, policy and standards relating to corporate governance and public disclosure, including SEC and Nasdaq regulations, tax legislation and the implementation of significant changes in the United States Generally Accepted Accounting Principles (“GAAP”), present challenges due to complexities, assumptions and judgements required to implement. We apply judgments based on our understanding, interpretation and analysis of the relevant facts, circumstances, historical experience and valuations, as appropriate. As a result, actual amounts could differ from those estimated at the time the financial statements are issued. In addition, implementation may change the financial accounting or reporting standards that govern the preparation of our financial statements or authoritative entities could reverse their previous interpretations or positions on how various financial accounting or reporting standards should be applied. These changes may be difficult to predict and implement and could materially or otherwise impact how we prepare and report our estimates, uncertainties, financial statements, operating results and financial condition. Our efforts to comply with evolving laws, regulations, accounting policies and standards have resulted in, and are likely to continue to result in, increased general and administrative expenses and management time and attention from revenue-generating activities to compliance activities and may have an adverse effect on our financial statements, including cash flows.

We depend heavily on our people and may from time to time have difficulty attracting and retaining skilled employees.

Our operations depend upon the continued contributions of our key management, marketing, technical, financial, accounting, product development engineers, sales people and operational personnel. We also believe that our continued success will depend upon our ability to attract, retain and develop highly skilled managerial and technical resources within the highly competitive EMS industry. Not being able to attract or retain these employees could have a material adverse effect on revenues and earnings.

Anti-Corruption and Trade Laws - We may incur costs and suffer damages if our employees, agents, or suppliers violate anti-bribery, anti-corruption or trade laws and regulations.

Laws and regulations related to bribery, corruption and trade, and enforcement thereof, are increasing in frequency, complexity and severity on a global basis. The continued geographic expansion of our business into China increases our exposure to, and cost of complying with, these laws and regulations. If our internal controls and compliance program do not adequately prevent or deter our employees, agents, suppliers and other third parties with whom we do business from violating anti-corruption laws, we may incur defense costs, fines, penalties, reputational damage and business disruptions.

Changes in currency translation rates could adversely impact our revenue and earnings.

Changes in exchange rates will impact our reported sales and earnings. A majority of our manufacturing and cost structure is based in the United States. In addition, decreased value of local currency may adversely affect demand for our products and may adversely affect the profitability of our products in U.S. dollars in foreign markets where payments are made in the local currency.

Operating in foreign countries exposes our operations to risks that could adversely affect our operating results.

We operate manufacturing facilities in Mexico and China. Our operations in those countries are subject to risks that could adversely impact our financial results, such as economic or political volatility, foreign legal and regulatory requirements, international trade factors (export controls, trade sanctions, duties, tariff barriers and other restrictions), protection of our and our customers’ intellectual property and proprietary technology in certain countries, potentially burdensome taxes, crime, employee turnover, staffing, managing personnel in diverse culture, labor instability, transportation delays, and foreign currency fluctuations.

Non-compliance with environmental laws may result in restrictions and could adversely affect operations.

Our operations are regulated under a number of federal, state, and foreign environmental and safety laws and regulations that govern the discharge of hazardous materials into the air and water, as well as the handling, storage, and disposal of such materials. These laws and regulations include the Clean Air Act; the Clean Water Act; the Resource Conservation and Recovery Act; and the Comprehensive Environmental Response, Compensation, and Liability Act; as well as similar federal, state and foreign laws. Compliance with these environmental laws is a major consideration for us due to our manufacturing processes and materials. It is possible we may be subject to potential financial liability for costs associated with the investigation and remediation at our sites; this may have an adverse effect on operations. We have not incurred significant costs related to compliance with environmental laws and regulations and we believe that our operations comply with all applicable environmental laws.

Environmental laws could also become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with violation. We operate in environmentally sensitive locations and are subject to potentially conflicting and changing regulatory agendas of political, business, and environmental groups. Changes or restrictions on discharge limits; emissions levels; or material storage, handling, or disposal might require a high level of unplanned capital investment or relocation. It is possible that environmental compliance costs and penalties from new or existing regulations may harm our business, financial condition, and results of operations.

We may be subject to risks associated with our acquisitions, and the risks could adversely affect our operating results.

Our strategy is to grow our business organically and through acquisitions, alliances and joint venture arrangements. We will continue to pursue and acquire additional businesses in the EMS industry that fit our long-term objectives for growth and profitability. The success of our acquisitions will depend on our ability to integrate the new operations with the existing operations. The Company cannot ensure that the expected benefits of any acquisition will be realized. Costs could be incurred on pursuits or proposed acquisitions that have not yet or may not close which could significantly impact the operating results, financial condition, or cash flows. Additionally, after the acquisition, unforeseen issues could arise which adversely affect the anticipated returns or which are otherwise not recoverable as an adjustment to the purchase price. Other acquisition risks include delays in realizing benefits from the acquired companies or products; difficulties due to lack of or limited prior experience in any new product or geographic markets we enter; unforeseen losses of customers of, or suppliers to, acquired businesses; difficulties in retaining key employees of the acquired businesses; or challenges arising from increased geographic diversity and complexity of our operations and our information technology systems. The price we pay for a business may exceed the value we realize and we cannot assure you that we will achieve the expected synergies and benefits of any acquisition. Acquisitions may result in the recording of goodwill and other intangible assets which are subject to potential impairments in the future that could harm our financial results.

If we fail to comply with the covenants contained in our credit agreement, we may be unable to secure additional financing and repayment obligations on our outstanding indebtedness may be accelerated.

Our credit agreement contains financial and operating covenants with which we must comply. As of December 31, 2019, we were in compliance with these covenants. However, our continued compliance with these covenants is dependent on our financial results, which are subject to fluctuation as described elsewhere in these risk factors. If we fail to comply with the covenants in the future or if our lender does not agree to waive any future non-compliance, we may be unable to borrow funds and any outstanding indebtedness could become immediately due and payable, which could materially harm our business.

We are dependent on our information technology systems for order, inventory and production management, financial reporting, communications and other functions. If our information systems fail or experience major interruptions due to physical damage or loss of power on our business and our financial results could be adversely affected.

We rely on our information technology systems to effectively manage our operational and financial functions. Our computer systems, Internet web sites, telecommunications, and data networks are vulnerable to damage or interruption from power loss, natural disasters and other sources of physical damage or disruption to the equipment which maintains, stores and hosts our information technology systems. We have taken steps to protect and create redundancies for the equipment that facilitates the use of our management information systems, but these steps may not be adequate to ensure that our operations are not disrupted by events within and outside of our control.

If our information technology systems fail or experience major interruptions, or the information technology systems of third parties that we rely upon fail or experience major interruptions, due to cyber-attacks or other activities designed to disrupt global information systems, our business and our financial results could be adversely affected. We rely on information technology systems to effectively manage our operational and financial functions and our day-to-day functions. We increasingly rely on information technology systems to process, transmit, and store electronic information. In addition, a significant portion of internal communications, as well as communication with customers and suppliers, depends on information technology. We are exposed to the risk of cyber incidents in the normal course of business. Cyber incidents may be deliberate attacks for the theft of intellectual property, other sensitive information or cash or may be the result of unintentional events. Like most companies, our information technology systems may be vulnerable to interruption due to a variety of events beyond our control, including, but not limited to, terrorist attacks, telecommunications failures, computer viruses, hackers, foreign governments, and other security issues. We have technology security initiatives and data recovery plans in place to mitigate our risk to these vulnerabilities, but these measures may not be adequate, or implemented properly, or executed timely to ensure that our operations are not disrupted. Potential consequences of a material cyber incident include damage to our reputation, litigation, and increased cyber security protection and remediation costs. Such consequences could adversely affect our results of operations.

Our business may be impacted by natural disasters or future climate change.

Natural disasters, such as tornadoes and earthquakes, and possible future changes in climate could negatively impact our business and supply chain. Our properties may be exposed to rare catastrophic weather events, such as severe storms and/or floods. If the frequency of extreme weather events increases due to climate change, our exposure to these events could increase. In countries that we rely on for operations and materials, such as Mexico and China, potential natural disasters or future climate changes could disrupt our manufacturing operations, reduce demand for our customers’ products and increase supply chain costs.

Epidemic diseases, or the perception of their effects, could have a material adverse effect on our business, financial condition, results of operations, or cash flows.

Outbreaks of epidemic, pandemic, or contagious diseases, such as the recent novel coronavirus or, historically, the Ebola virus, Middle East Respiratory Syndrome, Severe Acute Respiratory Syndrome, or the H1N1 virus, could cause a disruption to our business. Business disruptions could include temporary closures of our facilities or the facilities of our suppliers, reduced demand from customers, unavailability or restricted availability of raw materials or components necessary to manufacture our products, or disruptions or restrictions on our ability to travel or to distribute our products. Any disruption of our operations, our suppliers or our customers would likely impact our sales and operating results. In addition, a significant outbreak of epidemic, pandemic, or contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn that could affect demand for our products and services. Any of these events could negatively impact our sales and have a material adverse effect on our business, financial condition, results of operations, or cash flows.

Item 1B. Unresolved Staff Comments

As a smaller reporting company, we are not required to provide the information required by this Item.

Item 2. Properties

Administration

Our corporate headquarters consists of an approximately 19,000 square feet building located in Maple Grove, Minnesota, a northwestern suburb of Minneapolis, Minnesota, and its lease expires January 2025.

Manufacturing facilities

Our manufacturing facilities are in good operating condition and we believe our overall production capacity is sufficient to handle our foreseeable manufacturing needs and customer requirements. The following are our manufacturing facilities as of December 31, 2019:

Item 3. Legal Proceedings

From time to time, we are involved in ordinary, routine or regulatory legal proceedings incidental to the business. When a loss is deemed probable and reasonably estimable an amount is recorded in our consolidated financial statements.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

As of March 16, 2020, there were 646 shareholders of record. Our stock is listed on the NASDAQ Capital Market under the symbol “NSYS”. We intend to invest our profits into the growth of our operations and, therefore, do not plan to pay out dividends to shareholders in the foreseeable future. We did not declare or pay a cash dividend in 2019 or 2018. Future dividend policy and payments, if any, will depend upon earnings and our financial condition, our need for funds, limitations on payments of dividends present in our current or future debt agreements, and other factors.

Stock price comparisons (NASDAQ):

Issuer Purchase of Equity Securities

The $250,000 share repurchase program, authorized by our Board of Directors in August 2017, expired in July 2018 with no authorized repurchases remaining under this program. Under this repurchase program, we repurchased 55,199 shares totaling $194,420 during the year ended December 31, 2018. In August 2018, the Board of Directors approved an additional $250,000 share repurchase program. Under this repurchase program, we repurchased 32,769 and 21,002 shares totaling $130,376 and $81,329 during the year ended December 31, 2019 and 2018, respectively. As of December 31, 2019, this share repurchase plan has expired.

The table below sets forth information regarding repurchases we made of our common stock under the $250,000 share repurchase program authorized in August 2018 during the periods indicated.

Equity Compensation Plan Information

Certain information with respect to our equity compensation plans are contained in Part III, Item 12 of this Annual Report on Form 10-K.

Item 6. Selected Financial Data

As a smaller reporting company, we are not required to provide the information required by this Item.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

We are a Minnesota, United States based full-service global EMS contract manufacturer offering a full range of value-added engineering, technical and manufacturing services and support including project management, design, testing, prototyping, manufacturing, supply chain management and post-market services. Our products are complex wire and cable assemblies, printed circuit board assemblies, higher-level assemblies, medical devices and other box builds for a wide range of industries. We serve three major markets within the EMS industry: Aerospace and Defense, Medical, and the Industrial market which includes industrial capital equipment, transportation, vision, agriculture, oil and gas. As of December 31, 2019, we have facilities in Minnesota; Bemidji, Blue Earth, Mankato, Merrifield, Milaca and Maple Grove. We also have facilities in Monterrey, Mexico and Suzhou, China.

Our revenue is derived from complex designed products built to the customers’ specifications. The products we manufacture are engineered and designed products that require sophisticated manufacturing support. Quality, on time delivery, and reliability are of upmost importance. Our goal is to expand and diversify our customer base by focusing on sales and marketing efforts that fit our value-added service, early engagement design, and development strategy. We continue to focus on lean manufacturing initiatives, quality and on-time delivery improvements to increase asset utilization, reduce lead times and provide competitive pricing.

Our strategic investments have positioned us to capitalize on growth opportunities in the medical markets and improve our competitiveness by expanding our global footprint. Our industrial and defense markets are focused on improving our asset utilization and profitability while transforming to a value added, solution-sell business model that supports early engagement, design for manufacturability and rapid prototyping.

Recent Business Developments

The recent outbreak of novel coronavirus ("COVID-19") has continued to spread and is currently classified as a pandemic.   We recognize the seriousness of the current pandemic and are determined to address the outbreak and minimize the impact of COVID-19.  Our highest priority is the safety and well-being of our employees and other members in the Nortech community.  In all of our locations, Nortech employees and contractors have been working diligently to take precautions to ensure a clean and safe environment. We are also working closely with our suppliers and customers to ensure that we are taking every feasible step to minimize disruption and to continue to deliver the products our customers' need. 

As of the date of this filing, COVID-19 has not had a significant impact on our business. Although we currently expect that any future disruptive impact of COVID-19 on our business to be temporary, this situation continues to evolve rapidly and therefore we cannot predict the extent of which COVID-19’s  impact on Nortech.  We expect and are seeing that COVID-19 (and reactions to it) are having and will have negative global financial consequences and heightened uncertainty, which may directly or indirectly negatively impact the operation of our supply chain, our liquidity and capital resources, and our workforce availability, any of which could have a material adverse effect on our business, financial condition, results of operations or cash flows.

Critical Accounting Policies and Estimates

Our significant accounting policies and estimates are summarized in “Notes to Consolidated Financial Statements”. Some of the accounting policies require us to exercise significant judgment in selecting the appropriate assumptions for calculating financial estimates. Such judgments are subject to an inherent degree of uncertainty. These judgments are based on historical experience, known trends in the industry, terms of existing contracts and other information from outside sources, as appropriate. Actual results may differ from these estimates under different assumptions and conditions.

Certain of the most critical estimates that require significant judgment are as follows:

Revenue Recognition

Our revenue is comprised of product, engineering services and repair services. All revenue is recognized when the Company satisfies its performance obligation(s) under the contract by transferring the promised product or service to our customer either when (or as) our customer obtains control of the product or service, with the majority of our revenue being recognized over time including goods produced under contract manufacturing agreements and services revenue. A performance obligation is a promise in a contract to transfer a distinct product or service to a customer. A contract’s transaction price is allocated to each distinct performance obligation. The majority of our contracts have a single performance obligation. Revenue is recorded net of returns, allowances and customer discounts. Our net sales for services were less than 10% of our total sales for all periods presented, and accordingly, are included in net sales in the Condensed Consolidated Statements of Operations and Comprehensive Income. Sales, value add, and other taxes collected from customers and remitted to governmental authorities are accounted for on a net (excluded from revenues) basis. Shipping and handling costs charged to our customers are included in net sales, while the corresponding shipping expenses are included in cost of goods sold.

Goodwill and Other Intangible Assets

In accordance with ASC 350, Goodwill and Other Intangible Assets, goodwill is not amortized but is required to be reviewed for impairment at least annually or when events or circumstances indicate that carrying value may exceed fair value. We test impairment annually as of October 1st. In testing goodwill for impairment we perform a quantitative or qualitative impairment test, including computing the fair value of the reporting unit and comparing that value to its carrying value. If the fair value is less than its carrying value, then the goodwill is determined to be impaired. In the event that goodwill is impaired, an impairment charge to earnings would become necessary. To the extent the carrying amount of goodwill exceeds the implied goodwill, the difference is the amount of the goodwill impairment. Prior to completing the quantitative analysis described above, we have the option to perform a qualitative assessment of goodwill for impairment to determine whether it is more likely than not (a likelihood of more than 50%) that the fair value of a reporting unit is less than its carrying amount, including goodwill and other intangible assets. If we conclude the fair value is more likely than not less than the carrying value, we perform the quantitative analysis. Otherwise, no further testing is needed. 

In our annual impairment test in 2019, we performed a qualitative analysis of goodwill for as described above. Based on the analysis, we determined that it was more likely than not that the fair value exceeds the carrying amount and therefore, a quantitative analysis was not necessary. In our annual impairment test in 2018, we performed a quantitative analysis using discounted cash flows and market approach which is based on the guideline public company method. Discounted cash flow models include assumptions related to our product revenue, gross margins, operating margins and other assumptions. There was no impairment of goodwill recorded in 2018 or 2019.

Long-Lived Assets Impairment

We evaluate long-lived assets, primarily property and equipment, whenever current events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. Recoverability for assets to be held and used is based on our projection of the undiscounted future operating cash flows of the underlying assets. To the extent such projections indicate that future undiscounted cash flows are not sufficient to recover the carrying amounts of related assets, a charge might be required to reduce the carrying amount to equal estimated fair value. We determined there was a triggering event during the fourth quarter of 2018 and determined the undiscounted cash flows exceeded the carrying amounts of long-lived assets. We did not have a triggering event in 2019.

Allowance for Doubtful Accounts

When evaluating the adequacy of the allowance for doubtful accounts, we analyze accounts receivable, historical write-offs of bad debts, customer concentrations, customer credit-worthiness, current economic trends and changes in customer payment terms. We maintain an allowance for doubtful accounts at an amount estimated to be sufficient to provide adequate protection against losses resulting from collecting less than full payment on outstanding accounts receivable. An amount of judgment is required when assessing the ability to realize accounts receivable, including assessing the probability of collection and the current credit-worthiness of each customer. If the financial condition of our customers was to deteriorate, resulting in an impairment of their ability to make payments, an additional provision for uncollectible accounts may be required. We believe the reserve is adequate for any exposure to loss in the December 31, 2019 accounts receivable. At December 31, 2019, our allowance for doubtful accounts was $0.3 million.

Inventory Reserves

Inventory reserves are maintained for the estimated value of the inventory that may have a lower value than stated or quantities in excess of future production needs. We have an evaluation process to assess the value of the inventory that is slow moving, excess or obsolete on a quarterly basis. We evaluate our inventory based on current usage and the latest forecasts of product demand and production requirements from our customers. We believe the total reserve at December 31, 2019 of $1.5 million is adequate.

Operating Results

The following table presents our statements of operations data as percentages of total net sales for the years indicated:

Net Sales

Our net sales in 2019 were $116.3 million, compared to $113.4 million in 2018, an increase of $2.9 million or 2.6%. Net sales results were varied by markets. The medical market increased by $12.6 million or 25.2% with medical devices accounting for 140% of the increase while medical component products decreased 40%. The industrial market decreased by $9.6 million or 21.3% in 2019 as compared to 2018. Net sales from the aerospace and defense markets decreased by $0.1 million or 0.6% in 2019 as compared to 2018.

Net sales by our major EMS industry markets for the years ended December 31, 2019 and 2018 were as follows:

Net sales by timing of transfer of goods and services for year ended December 31, 2019 and 2018 are as follows (in millions):

Backlog

Our 90-day backlog at December 31, 2019 was $27.3 million, compared to $27.4 million at the end of 2018. Our aerospace and defense customers 90-day backlog increased 16.7% compared to the prior year end, along with an increase of 2.0% for our medical customers over the prior year. These increases were offset by a decrease of 19.4% in our industrial customers 90-day backlog compared to the prior year end.

90-day backlog by our major EMS industry markets are as follows:

Our 90-day backlog varies due to order size, manufacturing delays, inventory programs, contract terms and conditions and changes in timing of customer delivery schedules and releases. These variables cause inconsistencies in comparing the backlog from one period to the next. Our total shipment backlog was $50.1 million at December 31, 2019 compared to $47.1 million at the end of December 31, 2018.

Gross Profit

Our gross profit as a percentage of net sales was 10.8% and 11.7% for the years ended December 31, 2019 and 2018, respectively. The decline in gross profit in the year to date comparison was driven by product mix and operational inefficiencies due to component shortages.

Selling

Selling expenses were $2.7 million, or 2.3% of net sales, for the year ended December 31, 2019 and $3.6 million, or 3.2% of net sales, for the year ended December 31, 2018. The decrease is due to lower sales incentives and timing of events.

General and Administrative

General and administrative expenses were $9.6 million, or 8.3% of net sales, for the year ended December 31, 2019 and $8.4 million, or 7.4% of net sales, for the year ended 2018. The increase was due to additional spend related to our recently implemented ERP system and one-time expenditures to improve operations.

Income from Operations

Our income from operations for the 2019 fiscal year was $0.2 million, a decrease of $1.0 million from the 2018 fiscal year of $1.2 million, resulting from our decrease in gross profit as a percent of sales.

Interest Expense

Interest expense for the year ended December 31, 2019 was $1.0 million, compared with $0.8 million for the year ended December 31, 2018 due largely to additional borrowing on line of credit and higher interest rates.

Income Taxes

Income tax expense for the year ended December 31, 2019 was $0.4 million. Income tax expense for the year ended December 31, 2018 was $0.3 million. The effective tax rate for fiscal 2019 and 2018 was 49.9% and 66.3%, respectively. Our 2019 tax rate was driven by the tax on global intangible low-taxed income provisions and additional valuation allowance created due to more deferred tax assets generated in 2019.

Our 2018 tax rate was driven by the tax on global intangible low-taxed income provisions that was enacted in 2018 and onward.

The statutory reconciliation for the years ended December 31, 2019 and 2018 is as follows:

Net (Loss) Income

Our net loss in 2019 was $1.2 million or $(0.46) per diluted common share. Net income in 2018 was $0.2 million or $0.06 per diluted common share.

Liquidity and Capital Resources

We believe that our existing financing arrangements and anticipated cash flows from operations will be sufficient to satisfy our working capital needs, capital expenditures and debt repayments for at least the next 12 months.

Credit Facility

We have a credit agreement with Bank of America which was entered into on June 15, 2017 (as amended, the “Bank of America Credit Agreement”), and provides for a line of credit arrangement of $16 million that expires on June 15, 2022. The credit arrangement also has a $5 million real estate term note outstanding with a maturity date of June 15, 2022.

Under the Bank of America Credit Agreement, both the line of credit and real estate term notes are subject to variations in the LIBOR rate. Our Bank of America Credit Agreement bears interest at the combined weighted-average interest rate of 5.5% as of December 31, 2019, compared with 4.80% as of December 31, 2018. We had borrowings on our Bank of America Credit Agreement of $10.1 million outstanding, compared with $9.3 million outstanding as of December 31, 2018. There are no acceleration clauses under the Bank of America Credit Agreement that would accelerate the maturity of our outstanding line of credit borrowings.

The line of credit and real estate term notes with Bank of America contain certain covenants which, among other things, require us to adhere to regular reporting requirements, abide by annual shareholder dividend limitations, maintain certain financial performance, and limit the amount of annual capital expenditures. The availability under our line is subject to borrowing base requirements, and advances are at the discretion of the lender. The line of credit is secured by substantially all of our assets.

The Bank of America Credit Agreement provides for, among other things, a Fixed Charge Coverage Ratio of not less than (i) 1.0 to 1.0 for the three months ending December 31, 2019, six months ending March 31, 2020, nine months ending June 30, 2020 and twelve months ending September 30, 2020 and each fiscal quarter end thereafter.

The availability under the line is subject to borrowing base requirements, and advances are at the discretion of the lender. At December 31, 2019, we had unused availability under our line of credit of $4.1 million, supported by our borrowing base. The line is secured by substantially all of our assets.

In the second quarter of 2019, our China operations entered into a line of credit arrangement with China Construction Bank which provides for a line of credit arrangement of 6,000,000 Renminbi (RMB) that expires on April 3, 2021. This line of credit bears an interest rate of 6% and we had no amounts outstanding as of December 31, 2019.

Cash flows for the years ended December 31, 2019 and 2018 are summarized as follows:

Cash provided by operating activities for the year ended December 31, 2019 was $1.0 million and for the year ended December 31, 2018 was $2.4 million, both comprised primarily of net (loss)/income adjusted by the noncash add back of depreciation and amortization. The year-over-year decrease in cash provided by operating activities is due to the decrease in net earnings.

Net cash used in investing activities was $0.8 million and $1.4 million for the years ended December 31, 2019 and 2018, respectively. Cash used in investing activities in 2019 and 2018 was primarily reinvestments in the business to purchase property and equipment.

Net cash used in financing activities in 2019 and 2018 of $0.5 million and $0.9 million, respectively, consisted of payments on long-term debt and capital lease partially offset by borrowing on our line of credit.

Off-Balance Sheet Arrangements

We do not have any significant off-balance sheet arrangements.

Forward-Looking Statements

This Annual Report on Form 10-K, including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7, contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. We may also make forward-looking statements in other reports filed with the SEC, in materials delivered to stockholders and in press releases. Such statements generally will be accompanied by words such as “anticipate,” “believe,” “estimate,” “expect,” “forecast,” “intend,” “possible,” “potential,” “predict,” “project,” or other similar words that convey the uncertainty of future events or outcomes. Although we believe these forward-looking statements are reasonable, they are based upon a number of assumptions concerning future conditions, any or all of which may ultimately prove to be inaccurate. Forward-looking statements involve a number of risks and uncertainties. Important factors that could cause actual results to differ materially from the forward-looking statements include, without limitation:

The factors identified above are believed to be important factors (but not necessarily all of the important factors) that could cause actual results to differ materially from those expressed in any forward-looking statement made by us. Discussion of these factors is also incorporated in Part I, Item 1A, “Risk Factors,” and should be considered an integral part of Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Unpredictable or unknown factors not discussed herein could also have material adverse effects on forward-looking statements. All forward-looking statements included in this Form 10-K are expressly qualified in their entirety by the forgoing cautionary statements. We undertake no obligations to update publicly any forward-looking statement (or its associated cautionary language) whether as a result of new information or future events.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Not applicable.

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

TABLE OF CONTENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

Item 8. Financial Statements and Supplementary Data

(The remainder of this page was intentionally left blank.)

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the board of directors of Nortech Systems Incorporated:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of Nortech Systems Incorporated and subsidiaries (the “Company”) as of December 31, 2019 and 2018, the related consolidated statements of operations and comprehensive income (loss), shareholders’ equity and cash flows, for the years then ended, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2019 and 2018, and the results of their operations and their cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Adoption of New Accounting Standard

As discussed in Notes 1 and 5 to the consolidated financial statements, the Company has changed its method of accounting for operating leases as of January 1, 2019 due to the adoption of ASU 2016-02, Leases (Topic 842).

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ Baker Tilly Virchow Krause, LLP

We have served as the Company's auditor since 2017.

Minneapolis, Minnesota

March 19, 2020

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

(IN THOUSANDS, EXCEPT SHARE DATA)

See accompanying notes to Consolidated Statement of Operations and comprehensive Income (Loss)

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

(IN THOUSANDS, EXCEPT SHARE DATA)

 See accompanying notes to Consolidated Statement of Operations and comprehensive Income (Loss)

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

(IN THOUSANDS)

 See accompanying notes to Consolidated Statement of Operations and comprehensive Income (Loss)

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

(IN THOUSANDS)

See accompanying notes to Consolidated Statement of Operations and comprehensive Income (Loss)

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

AS OF AND FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

(IN THOUSANDS, EXCEPT SHARE AND PER SHARE DATA)

NORTECH SYSTEMS INCORPORATED AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

AS OF AND FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

(IN THOUSANDS, EXCEPT SHARE AND PER SHARE DATA)

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

In accordance with Rule 13a-15(b) of the Exchange Act, as of the end of the period covered by this Annual Report on Form 10-K, the Company’s management evaluated, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, the effectiveness of the design and operation of the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act). These controls and procedures are designed to ensure that information required to be disclosed in the Company’s Exchange Act reports is (1) recorded, processed, summarized and reported in a timely manner, and (2) accumulated and communicated to management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. Based upon their evaluation of these disclosure controls and procedures as of the date of the evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the disclosure controls and procedures were effective.

Management’s Annual Report on Internal Control Over Financial Reporting

Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control system was designed to provide reasonable assurance to management and the board of directors regarding the effectiveness of our internal control processes over the preparation and fair presentation of published financial statements.

All internal control systems, no matter how well designed, have inherent limitations. Therefore, even those systems determined effective can provide only reasonable assurance with respect to financial statement preparation and presentation.

We have assessed the effectiveness of our internal controls over financial reporting as of December 31, 2019. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control – Integrated Framework of 2013. Based on our assessment, we concluded that, as of December 31, 2019, our internal control over financial reporting was effective.

Changes in Internal Controls

There was no change in the Company’s internal control over financial reporting that occurred during our most recent quarter that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

Item 9B. Other Information

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance

Information regarding the directors and executive officers of the Registrant will be included in the Registrant's 2019 proxy statement to be filed with the Securities and Exchange Commission within 120 days after December 31, 2019, the end of our fiscal year, and said portions of the proxy statement are incorporated herein by reference.

The company has adopted a code of conduct applicable to all officers, directors, and employees. A copy of this code of conduct will be provided to any person, without charge, upon request from Nortech c/o Chief Financial Officer 7550 Meridian Circle N # 150, Maple Grove, MN 55369.

Item 11. Executive Compensation

Information regarding executive compensation of the Registrant will be included in the Registrant's 2019 proxy statement to be filed with the Securities and Exchange Commission within 120 days after December 31, 2019, the end of our fiscal year, and said portions of the proxy statement are incorporated herein by reference.

Item 12.   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Information regarding security ownership of certain beneficial owners and management of the Registrant will be included in the Registrant's 2019 proxy statement to be filed with the Securities and Exchange Commission within 120 days after December 31, 2019, the end of our fiscal year, and said portions of the proxy statement are incorporated herein by reference.

Information regarding executive compensation plans (including individual compensation arrangements) as of the end of the last fiscal year, on two categories of equity compensation plans (that is, plans that have been approved by security holders and plans that have not been approved by security holders) will be included in the Registrant's 2019 proxy statement to be filed with the Securities and Exchange Commission within 120 days after December 31, 2019, the end of our fiscal year, and said portions of the proxy statement are incorporated herein by reference.

The following table provides information about our equity compensation plans (including individual compensation arrangements) as of December 31, 2019.