NORTHWEST PIPE CO - Annual Report: 2014 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

For the Fiscal Year Ended: December 31, 2014

OR

For the transition period from                     to                     

Commission File Number: 0-27140

NORTHWEST PIPE COMPANY

(Exact name of registrant as specified in its charter)

5721 SE Columbia Way, Suite 200

Vancouver, WA 98661

(Address of principal executive offices and zip code)

360-397-6250

(Registrant’s telephone number including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K, or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer”, “accelerated filer”, and “smaller reporting company” in Rule 12b-2 of the Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of the common equity that was held by non-affiliates of the Registrant was $333,023,765 as of June 30, 2014 based upon the last sales price as reported by Nasdaq.

The number of shares outstanding of the Registrant’s common stock as of March 9, 2015 was 9,554,222 shares.

Documents Incorporated by Reference

The registrant has incorporated into Parts II and III of Form 10-K by reference certain portions of its Proxy Statement for its 2015 Annual Meeting of Shareholders.

Table of Contents

NORTHWEST PIPE COMPANY

2014 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

Table of Contents

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

Certain statements in this Annual Report on Form 10-K for the year ended December 31, 2014 (the “2014 Form 10-K”), other than purely historical information, are “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995 and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) that are based on current expectations, estimates and projections about our business, management’s beliefs, and assumptions made by management. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “forecasts,” “should,” and variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve a number of risks and uncertainties that are difficult to predict. Actual outcomes and results may differ materially from the results anticipated in these forward-looking statements as a result of a variety of important factors. While it is impossible to identify all such factors, those that could cause actual results to differ materially from those estimated by us include the important factors discussed in Part I—Item 1A, “Risk Factors.” Such forward-looking statements speak only as of the date they are made and we do not undertake any obligation to update any forward-looking statements to reflect events or circumstances after the date of this 2014 Form 10-K. If we do update one or more forward-looking statements, investors and others should not conclude that we will make additional updates or corrections with respect thereto or with respect to other forward-looking statements.

1

Table of Contents

PART I

Overview

We are a leading North American manufacturer of large diameter, high-pressure steel pipeline systems for use in water infrastructure applications, primarily related to drinking water systems, and we also manufacture other welded steel pipe products for use in a wide range of applications, including energy, construction, agriculture, and industrial uses. Our pipeline systems are also used for hydroelectric power systems, wastewater systems and other applications. In addition, we make products for industrial plant piping systems and certain structural applications. With a history that dates back more than 100 years, we have established a prominent position based on a strong and widely recognized reputation for quality, service and an extensive range of products engineered and manufactured to meet expectations in all categories of performance including highly corrosive environments.

We manufacture water infrastructure steel pipe products through our Water Transmission Group, which in 2014, 2013, and 2012 generated approximately 59%, 63%, and 69%, respectively, of our net sales from continuing operations. The Water Transmission Group produces large diameter, high pressure, engineered welded steel pipe products for use in water transmission applications. With eight Water Transmission manufacturing facilities, we are ideally located to meet North America’s growing needs for water and wastewater infrastructure. We market our water infrastructure products through an internal sales force. Our sales have historically been driven by the need for new water infrastructure, which is based primarily on overall population growth and population movement between regions.

We also manufacture smaller diameter electric resistance welded (“ERW”) steel pipe and other welded steel pipe products through our Tubular Products Group, which in 2014, 2013, and 2012 generated approximately 41%, 37%, and 31%, respectively, of our net sales from continuing operations. Our smaller diameter pipe is used for applications in energy, structural, commercial and industrial uses. We have one Tubular Products manufacturing facility located in Atchison, Kansas and we market our products through an internal sales force.

Recent Business Developments

On March 30, 2014 the Company completed the sale of substantially all of the assets and liabilities associated with the oil country tubular goods (“OCTG”) business conducted by the Company at its manufacturing facilities in Bossier City, Louisiana and Houston, Texas, excluding the real property located in Houston, Texas. These facilities were previously included within the Company’s Tubular Products Group. Total consideration of $42.7 million was paid by the buyer, resulting in a loss on sale of $13.5 million. The calculation of the loss on sale included a write down of $4.4 million of goodwill. Of the proceeds received, $4.3 million was placed in escrow to secure the Company’s indemnification obligations under the purchase agreement, $5.0 million was used to repay capital leases related to and secured by certain assets at the Bossier City, Louisiana manufacturing facility, $1.8 million was used to pay for transaction costs and $1.8 million was used to pay a net working capital adjustment made in September 2014, resulting in net proceeds of $29.8 million received during 2014.

In conjunction with the preparation of the year-end financial statements, the Company determined that the goodwill for its Tubular Products Group was impaired. The Company engaged a consultant to assist in its determination of the implied fair value of its goodwill after estimating the fair value of the Tubular Products Group’s net assets. As a result of that analysis, the entire Tubular Products Group goodwill balance of $16.1 million was written off. The writedown was a result of the worldwide turmoil in the crude oil markets, which became significant in the fourth quarter of 2014.

2

Table of Contents

Our Industries

Water Transmission. Much of the United States water infrastructure is antiquated and many authorities, including the United States Environmental Protection Agency (the “EPA”), believe the United States water infrastructure is in critical need of updates, repairs or replacements. In its 2011 Drinking Water Infrastructure Needs Survey and Assessment released in June 2013, the EPA estimates the nation will need to spend $384 billion in infrastructure investments by 2030 to continue to provide safe drinking water to the public. The American Society of Civil Engineers has given poor ratings to many aspects of the United States water infrastructure in their 2013 Report Card for America’s Infrastructure. In its most recent Failure to Act study of current infrastructure, the American Society of Civil Engineers estimates there will be an $84 billion funding gap for water and wastewater infrastructure by 2020, and a $144 billion gap by 2040.

Within this market, we focus on large diameter, engineered welded steel pipeline systems utilized in water, energy, structural and plant piping applications. Our core market is the large diameter, high-pressure portion of a water transmission pipeline that is typically at the “upper end” of a pipeline system. This is the portion of the overall water pipeline that generally transports water from the source to a treatment plant or from a treatment plant into the distribution system, rather than the small lines that deliver water directly into households. We believe the addressable market for the products sold by our Water Transmission Group will total approximately $1.4 billion over the next three years.

A combination of population growth, movement to new population centers, dwindling supplies from developed water sources, substantial underinvestment in water infrastructure over the past several decades, and an increasingly stringent regulatory environment are driving demand for water infrastructure projects in the United States. These trends are increasing the need for new water infrastructure as well as the need to upgrade, repair and replace existing water infrastructure. While we believe this offers the potential for increased demand for our water infrastructure products and other products related to water transmission, we also expect current governmental and public water agency budgetary pressures will impact near-term demand.

The primary drivers of growth in new water infrastructure installation are population growth and movement as well as dwindling supplies from developed water sources. According to the United States Census Bureau, the population of the United States will increase by approximately 77 million people between 2015 and 2050. The resulting increase in demand will require substantial new infrastructure, as the existing United States water infrastructure is not equipped to provide water to millions of new residents. In addition, many current water supply sources are in danger of being exhausted. The development of new sources of water at greater distances from population centers will drive the demand for new water transmission lines. Our eight Water Transmission manufacturing facilities are well located to take advantage of the anticipated growth and demand.

Increased public awareness of problems with the quality of drinking water and efficient water usage has resulted in more stringent application of federal and state environmental regulations. The need to comply with these regulations in an environment of heightened public awareness towards water issues is expected to contribute to demand in the water infrastructure industry over the next several years as water systems will need to be installed, upgraded and replaced.

On January 16, 2015, U.S. President Barack Obama announced new initiatives to improve the conditions of the aging water infrastructure, in which he noted that the U.S. needs $600 billion for drinking water and wastewater management over the next 20 years. These initiatives include a new Water Finance Agency at the EPA, a Rural Opportunity Investment Initiative at the U.S. Department of Agriculture, and the proposal to create Qualified Public Infrastructure Bonds to encourage more public private partnerships.

Tubular Products. The tubular products industry encompasses a wide variety of products serving a diverse group of end markets. We have been active in several of these markets, including energy, construction, agricultural, commercial, and industrial systems. With the sale of our OCTG business in March 2014, the segment’s primary product is line pipe, used to connect oil and gas wells to larger diameter pipelines.

3

Table of Contents

We expect demand from the energy markets to decrease due to the recent decrease in crude oil prices. After trading near $100 per barrel for most of the period since 2011, the price of crude oil started dropping in the summer of 2014 and decreased steeply in the fourth quarter to less than $50 per barrel by January 2015. Natural gas production remained at historically high levels during 2014 according to the United States Energy Information Administration. Of the active oil and natural gas rigs, approximately 22 percent of the rigs are drilling for natural gas and 78 percent are drilling for oil. Rig counts in the United States began to drop in December 2014 and have been on a steady decline since then. We believe demand for energy pipe will be dependent on crude oil prices through 2015. Because line pipe used in the energy sector is the primary product of our Tubular Products Group, we expect this demand to also drive results for this segment.

Products

Water Transmission. Water transmission pipe is used for high-pressure applications, typically requiring pipe to withstand pressures in excess of 150 pounds per square inch. Most of our water transmission products are made to custom specifications for fully engineered, large diameter, high-pressure water infrastructure systems. Other uses include pipe for piling and hydroelectric projects, wastewater treatment plants and other applications. Our primary manufacturing process has the capability to manufacture water transmission pipe in diameters ranging from 12 inches to 156 inches with wall thickness of 0.135 inch to 1.00 inch. We also have the ability to manufacture even larger and heavier pipe with other processes. We can coat and/or line these products with cement mortar, polyethylene tape, polyurethane paints, epoxies, Pritec^®, and coal tar enamel according to our customers’ specifications. We maintain fabrication facilities that provide installation contractors with custom fabricated sections as well as straight pipe sections. We typically deliver a complete pipeline system to the installation contractor.

Tubular Products. Our tubular products range in size from 4.500 inches to 16 inches in diameter with wall thickness from 0.134 inch to 0.375 inch. These products are typically sold to distributors or Original Equipment Manufacturers (“OEMs”) and are used for a wide variety of applications, including energy, construction, agriculture, and other commercial and industrial uses.

Marketing

Water Transmission. The primary customers for water transmission products are installation contractors for projects funded by public water agencies. One customer accounted for 16% of our total Company net sales from continuing operations in 2014, 15% of total net sales from continuing operations in 2013 and 16% of total net sales from continuing operation in 2012. Our plant locations in Oregon, Colorado, California, West Virginia, Texas, Missouri, Utah and Mexico, allow us to efficiently serve customers throughout the United States, as well as Canada and Mexico. Our Water Transmission marketing strategy emphasizes early identification of potential water projects, promotion of specifications consistent with our capabilities and close contact with the project designers and owners throughout the design phase. Our in-house sales force is comprised of sales representatives, engineers and support personnel who work closely with public water agencies, contractors and engineering firms, often years in advance of projects being bid. This allows us to identify and evaluate planned projects at early stages, participate in the engineering and design process, and ultimately promote the advantages of our systems. After an agency completes a design, they publicize the upcoming bid for a water transmission project. We then obtain detailed plans and develop our estimate for the pipe portion of the project. We typically bid to installation contractors who include our bid in their proposals to public water agencies. A public water agency generally awards the entire project to the contractor with the lowest responsive bid.

Tubular Products. Our tubular products are marketed through an in-house sales force and our tubular product manufacturing facility is located in Atchison, Kansas. Our marketing strategy focuses on quality, customer service and customer relationships. Our tubular products are primarily sold to distributors, although to a lesser extent we also sell to OEMs. Our sales effort emphasizes regular personal contact with current and potential customers. We supplement this effort with targeted advertising, brochures and participation in trade shows. One customer of our Tubular Products business accounted for 10% of our total net sales from continuing

4

Table of Contents

operations in 2014. No customer accounted for more than 10% of our total net sales from continuing operations during 2013 or 2012.

Manufacturing

Water Transmission. Water transmission manufacturing begins with the preparation of engineered drawings of each unique piece of pipe in a project. These drawings are prepared on our proprietary computer-aided design system and are used as blueprints for the manufacture of the pipe. After the drawings are completed and approved, manufacturing begins by feeding steel coil continuously at a specified angle into a spiral weld mill which cold-forms the band into a tubular configuration with a spiral seam. Automated arc welders, positioned on both the inside and the outside of the tube, are used to weld the seam. The welded tube is then cut at the specified length. After completion of the forming and welding phases, the finished cylinder is tested and inspected in accordance with project specifications, which may include 100% radiographic analysis of the weld seam. The cylinders are then coated and lined as specified. Possible coatings include coal tar enamel, polyethylene tape, polyurethane paint, epoxies, Pritec^® and cement mortar. Linings may be cement mortar, polyurethane or epoxies. Following coating and lining, certain pieces may be custom fabricated as required for the project. This process is performed in our fabrication facilities. Upon final inspection, the pipe is prepared for shipment. We ship our products to project sites principally by truck.

Tubular Products. Tubular products are manufactured by an ERW process in diameters ranging from 4.500 inches to 16 inches. This process begins by unrolling and slitting steel coils into narrower bands sized to the circumference of the finished product. Each band is re-coiled and fed into the material handling equipment at the front end of the ERW mill and fed through a series of rolls that cold-form it into a tubular configuration. The resultant tube is welded by high-frequency electric resistance welders. After exiting the mill, the products are straightened, inspected, tested and end-finished. Certain products are coated.

Technology. Advances in technology help us produce high quality products at competitive prices. We have invested in modern welding and inspection equipment to improve both productivity and product quality. With the purchase of Permalok in December 2013, the Company acquired certain technologies with respect to an interlocking pipe joining system that provides an alternate joint solution used for connecting steel pipes.

To stay current with technological developments in the United States and abroad, we participate in trade shows, industry associations, research projects and vendor trials of new products.

Quality Assurance. We have quality management systems in place that assure we consistently provide products that meet or exceed customer and applicable regulatory requirements. All of our quality management systems in the United States are registered by the International Organization for Standardization, or ISO, under a multi-site registration. In addition to ISO qualification, the American Institute of Steel Construction, American Petroleum Institute, American Society for Mechanical Engineers, Factory Mutual, National Sanitation Foundation, and Underwriters Laboratory have certified us for specific products or operations. The Quality Assurance department is responsible for monitoring and measuring characteristics of the product. Inspection capabilities include, but are not limited to, visual, dimensional, liquid penetrant, magnetic particle, hydrostatic, ultrasonic, phased array ultrasonics, real-time imaging enhancement, real-time radioscopic, base material tensile, yield and elongation, sand sieve analysis, coal-tar penetration, concrete compression, lining and coating dry film thickness, adhesion, absorption, guided bend, charpy impact, hardness, metallurgical examinations, chemical analysis, spectrographic analysis and finished product final inspection. Product is not released for shipment to our customers until there is verification that all product requirements have been met.

Product Liability. The manufacturing and use of our products involves a variety of risks. Certain losses may result, or be alleged to result, from defects in our products, thereby subjecting us to claims for damages, including consequential damages. We warrant our products to be free of certain defects for one year. We maintain insurance coverage against potential product liability claims in the amount of $51 million, which we believe to be adequate. Historically, product liability claims against us have not been material. However, there

5

Table of Contents

can be no assurance that product liability claims exceeding our insurance coverage will not be experienced in the future or that we will be able to maintain such insurance with adequate coverage.

Backlog

Our backlog includes confirmed orders, including the balance of projects in process, and projects for which we have been notified that we are the successful bidder even though a binding agreement has not been executed. Projects for which a binding contract has not been executed could be cancelled. Binding orders received by us may be subject to cancellation or postponement; however, cancellation would generally obligate the customer to pay the costs incurred by us. As of December 31, 2014, the backlog of orders for our Water Transmission Group was approximately $121 million. Binding contracts had been executed for approximately 71% of the Water Transmission backlog as of February 20, 2015. At December 31, 2013, the backlog of orders for our Water Transmission Group was approximately $103 million. Backlog as of any particular date may not be indicative of actual operating results for any fiscal period. There can be no assurance that any amount of backlog ultimately will be realized.

Competition

Water Transmission. We have several regional competitors in the Water Transmission business. Most water transmission projects are competitively bid and price competition is vigorous. Price competition may reduce the gross margin on sales, which may adversely affect overall profitability. Other competitive factors include timely delivery, ability to meet customized specifications and high freight costs which may limit the ability of manufacturers located in other market areas to compete with us. With Water Transmission manufacturing facilities in Oregon, Colorado, California, West Virginia, Texas, Missouri, Utah, and Mexico, we believe we can more effectively compete throughout the United States, Canada and Mexico. Our primary competitor in the Water Transmission business in the western United States and southwestern Canada is National Oilwell Varco, Inc. East of the Rocky Mountains, our primary competition includes: American Cast Iron Pipe Company and U.S. Pipe, which manufacture ductile iron pipe; American Spiral Weld Pipe Company, and Mid America Pipe Fabricating and Supply Inc., which manufacture spiral welded steel pipe; and Hanson Pipe & Precast, which manufactures concrete pressure pipe and spiral welded steel pipe.

No assurance can be given that other new or existing competitors will not establish new facilities or expand capacity within our market areas. New or expanded facilities or new competitors could have a material adverse effect on our ability to capture market share and maintain product pricing.

Tubular Products. The market for tubular products is highly fragmented and diversified with over 100 manufacturers in the United States and a number of foreign-based manufacturers that export such pipe into the United States. Manufacturers compete with one another primarily on the basis of price, quality, established business relationships, customer service and delivery. In some of the sectors within the tubular products industry, competition may be less vigorous due to the existence of a relatively small number of companies with the capabilities to manufacture certain products. In particular, we operate in a variety of different markets that require pipe with lighter wall thickness in relation to diameter than many of our competitors can manufacture. In our markets, we typically compete with TMK Ipsco, Energex Tube, Tex Tube Co., Tenaris, Evraz North America, California Steel Industries Inc., Paragon Industries, Inc., Welspun Tubular, LLC, and Axis Pipe and Tube, Inc., as well as foreign competitors.

Additionally, several companies have announced new plants or the expansion of product lines at existing facilities. New or expanded facilities or new competitors could have a material adverse effect on our ability to capture market share and maintain product pricing.

In recent years, we have faced increased competition from foreign-based manufacturers that export Tubular Products into the United States, resulting in downward pricing pressure and a growth in our inventory balances. Imported steel pipe represents a growing percentage of the line pipe market, and increased volumes of imported

6

Table of Contents

line pipe products could have a materially adverse affect on our ability to capture market share and maintain product pricing.

In October 2014, a trade case was filed for an investigation of imports of welded API line pipe from Korea and Turkey for possible imposition of anti-dumping and countervailing duties. A preliminary determination is expected in the second quarter of 2015. If anti-dumping or countervailing duties are imposed, we would expect to see a decrease in the competition from these countries.

Raw Materials and Supplies

We purchase hot rolled and galvanized steel coil from both domestic and foreign steel mills. Domestic suppliers include Steel Dynamics, Inc., Nucor Corporation, California Steel Industries, Inc., Evraz North America, and SSAB. Foreign suppliers include Posco America Corporation and BlueScope Steel. We order steel according to our business forecasts for our Tubular Products business. Steel for the Water Transmission business is normally purchased only after a project has been awarded to us. From time to time, we may purchase additional steel when it is available at favorable prices. Purchased steel represents a substantial portion of our cost of sales. The steel industry is highly cyclical in nature and steel prices are influenced by numerous factors beyond our control, including general economic conditions, availability of raw materials, energy costs, import duties, other trade restrictions and currency exchange rates.

We also rely on certain suppliers of coating materials, lining materials and certain custom fabricated items. We have at least two suppliers for most of our raw materials. We believe our relationships with our suppliers are positive and have no indication that we will experience shortages of raw materials or components essential to our production processes or that we will be forced to seek alternative sources of supply. Any shortages of raw materials may result in production delays and costs, which could have a material adverse effect on our financial position, results of operations or cash flows.

Environmental and Occupational Safety and Health Regulation

We are subject to federal, state, local and foreign environmental and occupational safety and health laws and regulations, violation of which could lead to fines, penalties, other civil sanctions or criminal sanctions. These environmental laws and regulations govern emissions to air; discharges to water (including stormwater); and the generation, handling, storage, transportation, treatment and disposal of waste materials. We operate under numerous governmental permits and licenses relating to air emissions, stormwater run-off and other environmental matters, and we are also subject to environmental laws requiring the investigation and cleanup of environmental contamination at properties we presently own or operate and at third-party disposal or treatment facilities to which these sites send or arrange to send hazardous waste. For example, we have been identified as a potentially responsible party at the Portland Harbor Site discussed in Part 1—Item 3, “Legal Proceedings” of this 2014 Form 10-K. We believe we are in material compliance with these laws and regulations and do not currently believe that future compliance with such laws and regulations will have a material adverse effect on our financial position, results of operations or cash flows.

Based on our assessment of potential liability, we have no reserves for environmental investigations and cleanup. However, estimating liabilities for environmental investigations and cleanup is complex and dependent upon a number of factors beyond our control which may change dramatically. Accordingly, although we believe maintaining no reserve is appropriate based on current information, we cannot provide assurance that our future environmental investigation and cleanup costs and liabilities will not result in a material expense.

Employees

As of February 13, 2015, we had approximately 943 full-time employees. Approximately 31% were salaried and approximately 69% were employed on an hourly basis. A union represents all of the hourly employees at our

7

Table of Contents

Monterrey, Mexico facility. All other employees are non-union. We consider our relations with our employees to be good.

Geographic Information

The Company sold principally all products in the United States, Canada and Mexico. As of December 31, 2014, all material long-lived assets are located in the United States. See Note 16 to the consolidated financial statements in Part II—Item 8. “Financial Statements and Schedules” of this 2014 Form 10-K.

Executive Officers of the Registrant

Information regarding the Company’s executive officers is set forth under the caption “Directors, Executive Officers and Corporate Governance” in Part III—Item 10 of this 2014 Form 10-K and is incorporated herein by reference.

Available Information

Our internet website address is www.nwpipe.com. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13 or 15(d) of the Exchange Act are available through our internet website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (“SEC”). All statements made in any of our securities filings, including all forward-looking statements or information, are made as of the date of the document in which the statement is included, and we do not assume or undertake any obligation to update any of those statements or documents unless we are required to do so by law. Our internet website and the information contained therein or connected thereto are not incorporated into this 2014 Form 10-K.

Additionally, the public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at www.sec.gov.

You should carefully consider the following factors, together with all the other information included in this 2014 Form 10-K, in evaluating our Company and our business. If any of the following risks actually occur, our business, financial condition, results of operations, or cash flows could be materially and adversely affected, and the value of our stock could decline. The risks and uncertainties described below are those that we currently believe may materially affect our Company. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operations. As such, you should not consider this list to be a complete statement of all potential risks or uncertainties.

Risks Related to our Business

Our exposure to the energy market represents a significant portion of our Tubular Products business. Our line pipe products, which serve the energy market, comprise 77%, 71%, and 60% of our tons sold in 2014, 2013, and 2012, respectively, for our continuing operations in the Tubular Products Group. Sales of these products are tied to the exploration, development, and production of natural gas and oil reserves. Factors affecting the profitability of exploration and production of hydrocarbons, such as the price of oil and gas, will have an effect on the market for energy pipe products.

8

Table of Contents

Crude oil prices declined significantly in the fourth quarter of 2014 and have remained near those levels in the first part of 2015. This has led to several announcements by oil and gas exploration and production companies that they are significantly reducing activity. These and further declines in the levels of exploration and production activity could adversely affect our business, financial position, results of operations, or cash flows.

Increased levels of imports have and could continue to adversely affect pricing and demand for our products. We believe import levels are affected by, among other things, overall worldwide demand, lower cost of production in other countries, the trade practices of foreign governments, government subsidies to foreign producers and governmentally imposed trade restrictions in the United States. Although certain imported steel products from China have been curtailed by anti-dumping duties, imported line pipe products from other countries have increased, notably from Korea and Turkey, which continue to command significant market share. The level of imports of tubular products has historically impacted the domestic tubular products market and is currently reducing the demand for our energy products. Increased imports in the United States and Canada which compete with our other tubular product and water transmission products could reduce demand for our products in the future and adversely affect our business, financial position, results of operations or cash flows.

Our Tubular Products business is facing intense competition from other North American suppliers. With the increase in energy pipe demand over the last several years, there have been significant increases in available capacity in North America. Approximately 2.7 million tons of tubular pipe capacity has been added in the last few years. Approximately 1.6 million tons of this additional tubular pipe capacity is still currently under construction. Energy tubular products generally include OCTG and line pipe. While OCTG producers can usually also produce line pipe, line pipe producers generally cannot produce OCTG. The significant pressure in energy tubular products could cause some OCTG producers to enter the line pipe markets. Increased domestic capacity and production in the United States and Canada could adversely affect our business, financial position, results of operations or cash flows.

A downturn in government spending related to public water transmission projects would adversely affect our business. Our Water Transmission business accounted for approximately 59% of our net sales from continuing operations in 2014. Our Water Transmission business is primarily dependent upon spending on public water transmission projects, including water infrastructure upgrades, repairs and replacement and new water infrastructure spending, which, in turn, depends on, among other things:

Decreases in the number of, or government funding of, public water transmission projects would adversely affect our business, financial position, results of operations, or cash flows.

Our Water Transmission business faces competition from other steel pipe manufacturers as well as concrete, ductile iron, polyvinyl chloride (“PVC”) and high density polyethylene (“HDPE”) pipe manufacturers. Orders in the Water Transmission business are competitively bid, and price competition can be vigorous. Price competition may reduce the gross margin on sales, which may adversely affect overall profitability. Other competitive factors include timely delivery, ability to meet customized specifications and high freight costs. Although our Water Transmission manufacturing facilities in Oregon, Colorado, California, West Virginia, Texas, Missouri, Utah, and Mexico allow us to compete throughout the United States, Canada and Mexico, we cannot assure you that new or existing competitors will not establish new facilities or expand capacity within our market areas. New or expanded facilities or new competitors could have a material adverse effect on our market share and product pricing in our Water Transmission business.

9

Table of Contents

Water transmission pipe is manufactured generally from steel, concrete, HDPE, PVC or ductile iron. Each pipe material has advantages and disadvantages. Steel and concrete are more common materials for larger diameter water transmission pipelines because ductile iron pipe generally is limited in diameter due to the manufacturing process. The public agencies and engineers who determine the specifications for water transmission projects analyze these pipe materials for suitability for each project. Individual project circumstances normally dictate the preferred material. If we experience cost increases in raw materials, labor and overhead specific to our industry or the location of our facilities, while competing products or companies do not experience similar changes, we could experience an adverse change in the demand, price and profitability of our products, which could have a material adverse effect on our business, financial position, results of operations or cash flows.

We may be unable to develop or successfully market new products or our products might not obtain necessary approvals or achieve market acceptance, which could adversely affect our growth. We will continue to actively seek to develop new products and to expand our existing products into new markets, but we cannot assure you that we will be successful in these efforts. If we are unsuccessful in developing and marketing new products, expanding into new markets, or we do not obtain or maintain requisite approvals for our products, the demand for our products could be adversely affected, which could affect our business, financial position, results of operations or cash flows.

The success of our business is affected by general economic conditions, and our business may be adversely affected by an economic slowdown or recession. Periods of economic slowdown or recession in the United States, or the public perception that one may occur, have and could further decrease the demand for our products, affect the price of our products and adversely impact our business. We have been impacted in the past by the general slowing of the economy, and the economic slowdown has had an adverse impact on our business, financial position, results of operations or cash flows. In particular, our Tubular Products Group is exposed to the energy exploration, non-residential construction, and agriculture markets, and a significant downturn in any one of these markets could cause a reduction in our revenues that could be difficult to offset.

Project delays in public water transmission projects could adversely affect our business. The public water agencies constructing water transmission projects generally announce the projects well in advance of the bidding and construction process. It is not unusual for projects to be delayed and rescheduled. Projects are delayed and rescheduled for a number of reasons, including changes in project priorities, difficulties in complying with environmental and other government regulations and additional time required to acquire rights-of-way or property rights. Delays in public water transmission projects may occur with too little notice to allow us to replace those projects in our manufacturing schedules. As a result, our business, financial position, results of operations or cash flows may be adversely affected by unplanned downtime.

Fluctuations in steel prices may affect our future results of operations. Purchased steel represents a substantial portion of our cost of sales, particularly in our Tubular Products business. The steel industry is highly cyclical in nature, and, at times, pricing can be highly volatile due to a number of factors beyond our control, including general economic conditions, import duties, other trade restrictions and currency exchange rates. Over the past three years, steel prices have fluctuated significantly. Our cost for a ton of steel from continuing operations was approximately $746 per ton in 2014, $707 per ton in 2013, and $738 per ton in 2012. In 2014, our monthly average steel purchasing costs ranged from a high of approximately $779 per ton to a low of approximately $708 per ton. This volatility can significantly affect our gross profit. Although we seek to recover increases in steel prices through price increases in our products, we have not always been successful. Any increase in steel prices that is not offset by an increase in our prices could have an adverse effect on our business, financial position, results of operations or cash flows.

10

Table of Contents

Operating problems in our business could adversely affect our business, financial position, results of operations or cash flows. Our manufacturing operations are subject to typical hazards and risks relating to the manufacture of similar products such as:

The occurrence of any of these operating problems at our facilities may have a material adverse effect on the productivity and profitability of a particular manufacturing facility or on our operations as a whole, during and after the period of these operating difficulties. These operating problems may also cause personal injury and loss of life, severe damage to or destruction of property and equipment, and environmental damage. In addition, individuals could seek damages for alleged personal injury or property damage. Furthermore, we could be subject to present and future claims with respect to workplace injury, exposure to hazardous materials, workers’ compensation and other matters. Although we maintain property and casualty insurance of the types and in the amounts that we believe are customary for our industries, we cannot assure you that our insurance coverage will be adequate for liability that may be ultimately incurred or that such coverage will continue to be available to us on commercially reasonable terms. Any claims that result in liability exceeding our insurance coverage could have an adverse effect on our business, financial position, results of operations or cash flows.

Our quarterly results of operations are subject to significant fluctuation. Our net sales and operating results may fluctuate significantly from quarter to quarter due to a number of factors, including:

Results of operations in any period are not indicative of results for any future period, and comparisons between any two periods may not be meaningful.

We face risks in connection with potential acquisitions and divestitures. Acquiring businesses that expand and/or complement our operations has been an important element of our business strategy, and we

11

Table of Contents

continue to evaluate potential acquisitions that may expand and/or complement our business. We may not be able to successfully identify attractive acquisition candidates or negotiate favorable terms in the future. Furthermore, our ability to effectively integrate any future acquisitions will depend on, among other things, the adequacy of our implementation plans, the ability of our management to oversee and operate effectively the combined operations and our ability to achieve desired operational efficiencies. We may also consider other alternatives for our business units in order to strategically position our business and continue to compete in our markets, which may include joint-ventures and/or divestitures. Our failure to successfully integrate the operations of any businesses that we may acquire in the future or our inability to attract a business partner in which to enter into a joint-venture or a buyer willing to purchase our business units may adversely affect our business, financial position, results of operations or cash flows.

We had net sales of greater than 10% of total net sales from continuing operations from each of two customers in 2014 and one customer in both 2013 and 2012. The loss of these customers or a significant reduction in their purchases could adversely affect our business, financial position, results of operations or cash flows.

We may be subject to claims for damages for defective products, which could adversely affect our business, financial position, results of operations or cash flows. We warrant our products to be free of certain defects. We have, from time to time, had claims alleging defects in our products. We cannot assure you that we will not experience material product liability losses in the future or that we will not incur significant costs to defend such claims. While we currently have product liability insurance, we cannot assure you that our product liability insurance coverage will be adequate for liabilities that may be incurred in the future or that such coverage will continue to be available to us on commercially reasonable terms. Any claims relating to defective products that result in liabilities exceeding our insurance coverage could have an adverse effect on our business, financial position, results of operations or cash flows.

We may not be able to recover costs and damages from vendors that supply defective materials. We may receive defective materials from our vendors that are incorporated into our products during the manufacturing process. The cost to repair, remake or replace defective products could be greater than the amount that can be recovered from the vendor. Such excess costs could have an adverse effect on our business, financial position, results of operations or cash flows.

We have a foreign operation which exposes us to the risks of doing business abroad. Our facility in Monterrey, Mexico primarily exports products to the United States. We may operate in additional countries in the future. Any material changes in the quotas, regulations or duties on imports imposed by the United States government and our agencies or on exports imposed by these foreign governments and their agencies could adversely affect our foreign operations.

We also sell some of our products internationally. Our foreign activities are also subject to various other risks of doing business in a foreign country, including:

12

Table of Contents

No assurance can be given that our operations may not be adversely affected in the future. Any of these events could have an adverse effect on our operations in the future by reducing the demand for our products and services, decreasing the prices at which we can sell our products or increasing costs such that there would be an adverse effect on our business, financial position, results of operations or cash flows. We cannot assure you that we will continue to operate in compliance with applicable customs, currency exchange control regulations, transfer pricing regulations or any other laws or regulations to which we may be subject, or that any such regulations or laws will not be modified. Any failure by us to comply with any such applicable regulations or laws, or any changes in any such regulations or laws could have a material adverse effect on our business, financial position, results of operations or cash flows.

Our use of the percentage-of-completion method of accounting includes estimates. Revenue from construction contracts in our Water Transmission segment is recognized on the percentage-of-completion method, measured by the costs incurred to date as a percentage of the estimated total costs of each contract (the cost-to-cost method). Estimated total costs of each contract are reviewed on a monthly basis by project management and operations personnel for all active projects. All cost revisions that result in the gross profit as a percent of sales increasing or decreasing by more than two percent are reviewed by senior management personnel.

The use of estimated cost to complete each contract is a significant variable in the process of determining income earned and is a significant factor in the accounting for contracts. The cumulative impact of revisions in total cost estimates during the progress of work is reflected in the period in which these changes become known. Due to the variability of events affecting our estimates which have a material impact on our contract accounting, actual results could differ from those estimates, which could adversely affect our financial position, results of operations or cash flows.

Our Water Transmission backlog is subject to reduction and cancellation. Backlog represents products or services that our customers have committed to purchase from us and projects for which we have been notified that we are the successful bidder even though a binding agreement has not been executed. Projects for which a binding contract has not been executed could be cancelled. Our backlog of orders for our Water Transmission segment was approximately $121 million at December 31, 2014. Our backlog is subject to fluctuations; moreover, cancellations of purchase orders, change orders on contracts, or reductions of product quantities could materially reduce our backlog and, consequently, future revenues. Our failure to replace canceled or reduced backlog could result in lower revenues, which could adversely affect our business, financial position, results of operations or cash flows.

We are subject to stringent environmental and health and safety laws, which may require us to incur substantial compliance and remediation costs, thereby reducing our profits. We are subject to many federal, state, local and foreign environmental and health and safety laws and regulations, particularly with respect to the use, handling, treatment, storage, discharge and disposal of substances and hazardous wastes used or generated in our manufacturing processes. Compliance with these laws and regulations is a significant factor in our business. We have incurred, and expect to continue to incur, significant expenditures to comply with applicable environmental laws and regulations. Our failure to comply with applicable environmental laws and regulations and permit requirements could result in civil or criminal fines or penalties or enforcement actions, including regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures, installation of pollution control equipment or remedial actions.

We are currently, and may in the future be, required to incur costs relating to the environmental assessment or environmental remediation of our property, and for addressing environmental conditions, including, but not limited to, the issues associated with our Portland, Oregon facility as discussed in Part I—Item 3, “Legal Proceedings” below. Some environmental laws and regulations impose liability and responsibility on present and former owners, operators or users of facilities and sites for contamination at such facilities and sites without

13

Table of Contents

regard to causation or knowledge of contamination. Consequently, we cannot assure you that existing or future circumstances, the development of new facts or the failure of third parties to address contamination at current or former facilities or properties will not require significant expenditures by us.

We expect to continue to be subject to increasingly stringent environmental and health and safety laws and regulations. It is difficult to predict the future interpretation and development of environmental and health and safety laws and regulations or their impact on our future earnings and operations. We anticipate that compliance will continue to require capital expenditures and operating costs. Any increase in these costs, or unanticipated liabilities arising, for example, out of discovery of previously unknown conditions or more aggressive enforcement actions, could adversely affect our results of operations, and there is no assurance that they will not have a material adverse effect on our business, financial position, results of operations or cash flows.

Our information technology systems can be negatively affected by cyber security threats. Increased global information technology security requirements, vulnerabilities, threats and a rise in sophisticated and targeted computer crime pose a risk to the security of our systems, networks and the confidentiality, availability and integrity of our data. Despite our efforts to protect sensitive information and confidential and personal data, our facilities and systems and those of our third-party service providers may be vulnerable to security breaches. This could lead to disclosure, modification or destruction of proprietary, employee, and other key information, and operational disruptions, which in turn could adversely affect our reputation, competitiveness and results of operations.

Risks Related to Our Financial Condition

Our significant debt obligations and the restrictions under which we operate as a result of our debt obligations could have a material adverse effect on our business, financial condition, results of operations or cash flows. We have financed our operations through cash flows from operations, available borrowings and other financing arrangements. As of December 31, 2014, we had approximately $48.0 million of outstanding debt and capital lease obligations.

Our debt and our debt service obligations could:

Our ability to make scheduled payments on our debt will depend on our future operating performance and cash flows, which are subject to prevailing economic conditions, prevailing interest rate levels and other financial, competitive and business factors, many of which are beyond our control. Our inability to make scheduled payments on our debt or any of the foregoing factors would have a material adverse effect on our business, financial condition, results of operations, or cash flows.

We will need to substantially increase working capital if market conditions and customer order levels improve. If market conditions and customer order levels improve, we will have to increase our working capital

14

Table of Contents

substantially, as it will take several months for new orders to be translated into cash receipts. In general, availability under our Credit Agreement while remaining in compliance with our financial covenants is limited to $61.7 million as of December 31, 2014. We may not have sufficient availability under this agreement to borrow the amounts we need, and other opportunities to borrow additional funds or raise capital in the equity markets may be limited or nonexistent. A shortage in the availability of working capital would have a material adverse effect on our business, financial condition, results of operations, or cash flows.

Our failure to comply with covenants in our debt instruments could result in our indebtedness being immediately due and payable, which would have a material adverse effect on our business, financial condition, results of operations or cash flows. The agreements governing our outstanding debt include financial and other restrictive covenants that impose certain requirements with respect to our financial condition and results of operations and general business activities. These covenants require us to maintain certain financial ratios and place restrictions on, among other things, our ability to incur certain additional debt and to create liens or other encumbrances on assets.

Our ability to comply with the financial and other covenants under our debt instruments in the future is uncertain and will be affected by our results of operations and financial condition as well as other events and circumstances beyond our control. If market and other economic conditions do not improve, our ability to comply with these covenants may be impaired. A failure to comply with the requirements of these covenants, if not waived or cured, could permit acceleration of the related debt. If any of our debt is accelerated, we cannot assure you that we would have sufficient assets to repay such debt or that we would be able to refinance such debt on commercially reasonable terms or at all. The acceleration of a significant portion of our debt would have a material adverse effect on our business, financial condition, results of operations, or cash flows.

Disruptions in the financial markets and the general economic slowdown could cause us to be unable to obtain financing and expose us to risks related to the overall macro-economic environment, which could have a material adverse effect on our business, financial condition, results of operations or cash flows. The United States equity and credit markets have experienced significant price volatility, dislocations and liquidity disruptions, which have caused market prices of many equities to fluctuate substantially and the spreads on prospective debt financings to widen considerably. These circumstances have materially impacted liquidity in the financial markets, making terms for certain financings less attractive, and in some cases have resulted in the unavailability of financing, even for companies who are otherwise qualified to obtain financing. These events may make it less likely that we will be able to obtain additional financing and also may make it more difficult or prohibitively costly for us to raise capital through the issuance of debt or equity securities.

Risks Related to Our Internal Control Over Financial Reporting

We have identified material weaknesses in internal control in prior years. For the year ended December 31, 2013, a material weakness in our internal control over financial reporting related to goodwill was identified. A “material weakness” is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim consolidated financial statements would not be prevented or detected. This material weakness has not been remediated as of December 31, 2014. No additional material weaknesses were identified as of December 31, 2014. However, we cannot assure you that additional material weaknesses in our internal control over financial reporting will not be identified in the future. Any failure to maintain or implement required new or improved controls, or any difficulties we encounter in their implementation, could result in additional material weaknesses, or could result in material misstatements in our financial statements. These misstatements could result in a restatement of financial statements, cause us to fail to meet our reporting obligations or cause investors to lose confidence in our reported financial information, leading to a decline in our stock price.

15

Table of Contents

Risks Related to Our Common Stock

The relatively low trading volume of our common stock may limit your ability to sell your shares. Although our shares of common stock are listed on the Nasdaq Global Select Market (“Nasdaq”), we have historically experienced a relatively low trading volume. If we have a low trading volume in the future, holders of our shares may have difficulty selling a large number of shares of our common stock in the manner or at a price that might otherwise be attainable.

The market price of our common stock could be subject to significant fluctuations. The market price of our common stock has experienced, and may continue to experience, significant volatility. Among the factors that could affect our stock price are:

The stock markets in general have experienced broad fluctuations that have often been unrelated to the operating performance of particular companies. These broad market fluctuations may adversely affect the trading price of our common stock.

Certain provisions of our governing documents and Oregon law could discourage potential acquisition proposals. Our articles of incorporation contain provisions that:

In addition, we are subject to the Oregon Business Combination Act, which imposes certain restrictions on business combination transactions and may encourage parties interested in acquiring us to negotiate in advance with our board of directors. We also have a shareholder rights plan that acts to discourage any person or group from making a tender offer for, or acquiring, more than 15% of our common stock without the approval of our board of directors. Any of these provisions could discourage potential acquisition proposals, could deter, delay or prevent a change in control that our shareholders consider favorable and could depress the market value of our common stock.

None.

16

Table of Contents

Properties

The following table provides certain information about our nine operating facilities as of December 31, 2014:

As of December 31, 2014, we owned all of our facilities except for one of our Saginaw, Texas facilities, property adjacent to our Oregon facility, our St. Louis facility, and our Salt Lake City facility, which are leased.

Our facilities serve regional markets, which vary in the number and sizes of projects year-over-year. Consequently, we have excess manufacturing capacity from time to time at each of our facilities. We believe the quality and productive capacity of our facilities are sufficient to maintain our competitive position for the foreseeable future.

Portland Harbor Superfund

On December 1, 2000, a section of the lower Willamette River known as the Portland Harbor Site was included on the National Priorities List at the request of the United States Environmental Protection Agency (the “EPA”). While the Company’s Portland, Oregon manufacturing facility does not border the Willamette River, an outfall from the facility’s stormwater system drains into a neighboring property’s privately owned stormwater system and slip. Since the listing of the site, the Company was notified by the EPA and the Oregon Department of Environmental Quality (“ODEQ”) of potential liability under the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”). In 2008, the Company was asked to file information disclosure reports with the EPA (CERCLA 104 (e) information request). By agreement with the EPA, ODEQ is responsible for overseeing remedial investigation and source control activities for all upland sites to investigate sources and prevent future contamination to the river. A remedial investigation and feasibility study (“RI/FS”) of the Portland Harbor Site has been directed by a group of 14 potentially responsible parties known as the Lower Willamette Group (the “LWG”) under agreement with the EPA. The Company made a payment of $0.2 million to the LWG in June 2007 as part of an interim settlement, and is under no obligation to make any further payment. The final draft remedial investigation (“RI”) was submitted to the EPA by the LWG in fall of 2011 and the draft feasibility study (“FS”) was submitted by the LWG to the EPA in March 2012. The draft FS identifies ten possible remedial alternatives which range in estimated cost from approximately $169 million to $1.76 billion and estimates a range of two to 28 years to implement the remedial work, depending on the selected alternative. The report does not determine who is responsible for the costs of cleanup or how the cleanup costs will be allocated among the potentially responsible parties. As of the date of this filing, the final RI and the revised FS are pending approval of the EPA.

17

Table of Contents

In 2001, groundwater containing elevated volatile organic compounds (“VOCs”) was identified in one localized area of leased property adjacent to the Portland facility furthest from the river. Assessment work in 2002 and 2003 to further characterize the groundwater was consistent with the initial conclusion that the source of the VOCs is located off of Company-owned property. In February 2005, the Company entered into a Voluntary Agreement for Remedial Investigation and Source Control Measures (the “Agreement”) with ODEQ. The Company is one of many Upland Source Control Sites working with ODEQ on Source Control and is considered a “medium” priority site by ODEQ indicating more investigation was recommended. The Company performed RI work required under the Agreement and submitted a draft RI/Source Control Evaluation Report (“SCE”) in December 2005 and a revised draft RI/SCE Report in January 2014 (2014 RI/SCE Report). The conclusions of the report include: (1) the VOCs found in the groundwater do not present an unacceptable risk to human or ecological receptors in the Willamette River; (2) there is no evidence at this time showing a connection between detected VOCs in groundwater and Willamette River sediments; (3) the interim remedial measure to conduct a limited excavation of soil and complete paving the site was completed; (4) a state-of-the art stormwater treatment system was installed; and (5) an area of stained soil was characterized and remediated.

During the localized soil excavation in 2011, additional stained soil was discovered. At the request of ODEQ, the Company developed an additional Work Plan to characterize the nature and extent of soil and/or groundwater impacts from the staining. The Company began implementing this Work Plan in the second quarter of 2012 and submitted sampling results to ODEQ in the third quarter of 2012. Comments from ODEQ were received in November 2012. In February 2013, ODEQ clarified its comments from November 2012, and the Company completed its second round of groundwater sampling for the Stained Soil Investigation Area in May and November 2013. The results were reported to ODEQ in January 2014 in the RI/SCE Report. Comments were received from ODEQ in June 2014 and will be addressed in a revised report.

The Company spent $0.1 million for further Source Control work in 2014, and less than $0.1 million in 2013.

Concurrent with the activities of the EPA and ODEQ, the Portland Harbor Natural Resources Trustee Council (“Trustees”) sent some or all of the same parties, including the Company, a notice of intent to perform a Natural Resource Damage Assessment (“NRDA”) for the Portland Harbor Site to determine the nature and extent of natural resource damages under CERCLA section 107. The Trustees for the Portland Harbor Site consist of representatives from several Northwest Indian Tribes, three federal agencies and one state agency. The Trustees act independently of the EPA and ODEQ. The Trustees have encouraged potentially responsible parties to voluntarily participate in the funding of their injury assessments and several of those parties have agreed to do so. In June 2014, the Company agreed to participate in the injury assessment process, which included funding $0.4 million of the assessment; of this amount, $0.2 million was paid in July 2014 and the remainder was paid in January 2015. The Company has not assumed any additional payment obligations or liabilities with the participation with the NRDA.

The Company’s potential liability is a portion of the costs of the remedy the EPA will select for the entire Portland Harbor Site. The cost of that remedy is expected to be allocated among more than 100 potentially responsible parties. Because of the large number of responsible parties and the variability in the range of remediation alternatives, the Company is unable to estimate an amount or an amount within a range of costs for its obligation with respect to the Portland Harbor Site matters, and no further adjustment to the consolidated financial statements has been recorded as of the date of this filing. The Company has insurance policies for defense costs, as well as indemnification policies it believes will provide reimbursement for any share of the remediation assessed. However, the Company can provide no assurance that those policies will cover all of the costs which the Company may incur.

In December 2014, a federal district court approved settlements between the Company and two of its insurance carriers. The Company released its interests in the related insurance policies, and received $2.6 million in January 2015 for reimbursement of past indemnification and defense costs incurred by the Company associated with the Portland Harbor Site. As of December 31, 2014, $2.6 million was included in trade and other

18

Table of Contents

receivables. Notwithstanding these settlements, the Company continues to have insurance coverage for indemnification and defense costs related to Portland Harbor Site as described above.

Houston Environmental Cleanup

In connection with the Company’s sale of its OCTG business, a Limited Phase II Environmental Site Assessment was conducted at the Houston, Texas plant and completed in March 2014, which revealed the presence of VOCs in the groundwater and certain metals in the soil. In June 2014, the Company was admitted into the Texas Commission on Environmental Quality (“TCEQ”) Voluntary Cleanup Program to address these issues and obtain a Certificate of Completion from TCEQ. The cost of any potential cleanup will not be covered by insurance. However, any costs incurred will be reimbursed by the purchaser of the OCTG business discussed in Note 1, “Summary of Significant Accounting Policies – Business Acquisitions and Disposals” if the purchaser of the OCTG business exercises its option to purchase the property under certain circumstances after the Certificate of Completion is obtained. As the Company is in the early stages of this process, no adjustment to the consolidated financial statements has been recorded as of the date of this filing. We expect to be able to estimate the potential costs by mid-2015.

All Sites

The Company operates its facilities under numerous governmental permits and licenses relating to air emissions, storm water run-off, and other environmental matters. The Company’s operations are also governed by many other laws and regulations, including those relating to workplace safety and worker health, principally the Occupational Safety and Health Act and regulations there under which, among other requirements, establish noise and dust standards. The Company believes it is in material compliance with its permits and licenses and these laws and regulations, and the Company does not believe that future compliance with such laws and regulations will have a material adverse effect on its financial position, results of operations or cash flows.

From time to time, the Company is involved in litigation relating to claims arising out of its operations in the normal course of its business. The Company maintains insurance coverage against potential claims in amounts that are believed to be adequate. To the extent that insurance does not cover legal, defense, and indemnification costs associated with a loss contingency, such costs will be expensed as incurred. The Company believes that it is not presently a party to any other litigation, the outcome of which would have a material adverse effect on its business, financial condition, results of operations or cash flows.

Not applicable.

19

Table of Contents

PART II

Market Information

Our common stock is quoted on the Nasdaq under the symbol “NWPX.” The price range per share of common stock presented below represents the highest and lowest closing sales prices for the Company’s common stock on the Nasdaq during each quarter of the two most recent years.

There were 44 shareholders of record at February 24, 2015. A substantially greater number of holders of our common stock are beneficial holders, whose shares of record are held by banks, brokers, and other financial institutions. There were no cash dividends declared or paid in fiscal years 2014 or 2013, and we do not intend to pay cash dividends in the foreseeable future. We have not issued any securities during the past 3 years that were not registered under the Securities Act.

20

Table of Contents

Stock Performance Graph

The following graph compares the performance of our common stock to the performance of the Russell 2000 Index and a weighted composite index of certain peer companies (the “Peer Group”) selected by us. The Russell 2000 Index measures the performance of the small-cap segment of the U.S. equity markets. The Peer Group is comprised of Mueller Water Products, Lindsay Corporation and Valmont Industries, Inc.

The comparisons in the chart below are provided in response to SEC disclosure requirements and, therefore, are not intended to forecast or be indicative of future performance of our common stock.

Securities Authorized for Issuance under Equity Compensation Plans

The information with respect to equity compensation plans is included under Part III—Item 12, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” of this 2014 Form 10-K.

21

Table of Contents

The following tables include selected summary financial data for each of our last five years and should be read in conjunction with Part II—Item 8, “Financial Statements and Supplementary Data,” and Part II—Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in this 2014 Form 10-K.

The following selected consolidated financial data as of December 31, 2014 and 2013 and for the years ended December 31, 2014, 2013 and 2012 are derived from our audited consolidated financial statements included in this 2014 Form 10-K. For the years ended December 31, 2011 and 2010, income activity related to the disposed OCTG business is presented as discontinued operations, consistent with the years ended December 31, 2014, 2013, and 2012. While this 2011 and 2010 data is derived from the Company’s historical audited financial statements for those years, discontinued operations reporting for those years has not been audited.

Forward-Looking Statements

This Management’s Discussion and Analysis of Financial Condition and Results of Operations and other sections of this 2014 Form 10-K contain forward-looking statements within the meaning of the Securities Litigation Reform Act of 1995 and Section 21E of the Exchange Act that are based on current expectations,

22

Table of Contents

estimates and projections about our business, management’s beliefs, and assumptions made by management. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “forecasts,” “should,” and variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve risks and uncertainties that are difficult to predict. Therefore, actual outcomes and results may differ materially from the results anticipated in these forward-looking statements as a result of a variety of important factors. While it is impossible to identify all such factors, those that could cause actual results to differ materially from those estimated by us include the important factors discussed in Part 1—Item 1A, “Risk Factors.” Such forward-looking statements speak only as of the date on which they are made and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this 2014 Form 10-K. If we do update or correct one or more forward-looking statements, investors and others should not conclude that we will make additional updates or corrections with respect thereto or with respect to other forward-looking statements.

Overview

We are a leading North American manufacturer of large diameter, high-pressure steel pipeline systems for use in water infrastructure applications, primarily related to drinking water systems, and we also manufacture other welded steel pipe products for use in a wide range of applications, including energy, construction, agriculture, and industrial uses. Our pipeline systems are also used for hydroelectric power systems, wastewater systems and other applications. In addition, we make products for industrial plant piping systems and certain structural applications. With a history that dates back more than 100 years, we have become a leading manufacturer in the welded steel pipe industry. These pipeline systems are produced by our Water Transmission Group from eight manufacturing facilities, which are located in Portland, Oregon; Denver, Colorado; Adelanto, California; Parkersburg, West Virginia; Saginaw, Texas; Salt Lake City, Utah; St. Louis, Missouri; and Monterrey, Mexico. Our Water Transmission Group accounted for approximately 59% of net sales from continuing operations in 2014.

Our water infrastructure products are sold generally to installation contractors, who include our products in their bids to municipal agencies or privately-owned water companies for specific projects. We believe our sales are substantially driven by spending on new water infrastructure with a recent trend towards spending on water infrastructure replacement, repair and upgrade. Within the total range of pipe products, our products tend to fit the larger diameter, higher-pressure applications.

Our Tubular Products Group manufactures ERW steel pipe at our Atchison, Kansas facility. We produce a range of line pipe products used in several different applications including industrial, construction, and agricultural. Our Tubular Products Group generated approximately 41% of our net sales from continuing operations in 2014. Our Tubular Products Group’s sales volume is typically driven by energy spending, non-residential construction spending and general economic conditions. The OCTG business, formerly part of our Tubular Products Group, was sold in March 2014, as discussed in Item 1.

Our Current Economic Environment

We are monitoring the current economic environment, and we believe the near-term growth opportunities will be challenging based on key factors impacting demand for our products. We expect demand from the energy markets to decrease due to the recent decrease in crude oil prices. After trading near $100 per barrel for most of the period since 2011, the price of crude oil started dropping in the summer of 2014 and decreased steeply in the fourth quarter to less than $50 per barrel by January 2015. The price of crude oil has rebounded modestly in the first quarter of 2015, but prices remain much lower than levels even six months ago. Natural gas production was at historically high levels during 2014 according to the United States Energy Information Administration and strong storage levels are expected to keep natural gas prices at historically low levels. Of the active oil and natural gas rigs, approximately 78 percent of the rigs are drilling oil and 22 percent are drilling for natural gas. Rig counts in the United States began to drop in December 2014 and have been on a steady decline since then. We believe demand for line pipe will be dependent on crude oil prices through 2015.

23

Table of Contents

In addition to the macroeconomic factors described above we continue to face pressures from foreign imports, which will continue to put downward pricing pressure on our products within the markets we compete. We also face increased pressures due to recent domestic capacity expansions by our competitors. With regard to our Water Transmission Group, we operate our business with a long-term time horizon. Projects are often planned for many years in advance, and are sometimes part of fifty-year build out plans. However, in the near term, we expect strained governmental and water agency budgets will impact the Water Transmission Group. Fluctuating steel costs will be a factor in both our Tubular Products Group and our Water Transmission Group, as the ability to adjust our selling prices as steel costs fluctuate will depend on market conditions.

Critical Accounting Policies

The discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States.

Management Estimates

The preparation of our consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and disclosure of contingent assets and liabilities. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. On an on-going basis, we evaluate all of our estimates, including those related to revenue recognition, allowance for doubtful accounts, goodwill, property and equipment, including depreciation and amortization, inventories, income taxes, and litigation and other contingencies. Actual results may differ from these estimates under different assumptions or conditions. We believe the following critical accounting policies and related judgments and estimates affect the preparation of our consolidated financial statements.

Revenue Recognition:

Revenue from construction contracts in our Water Transmission Group is recognized on the percentage-of-completion method. For a majority of contracts, revenue is measured by the costs incurred to date as a percentage of the estimated total costs of each contract (cost-to-cost method). For a small number of contracts, revenue is measured using units of delivery as progress is best estimated by the number of units delivered under the contract. Contract costs include all direct material and labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs and depreciation. Selling, general and administrative costs are charged to expense as incurred. The cost of steel is recognized as a project cost when the steel is introduced into the manufacturing process. Estimated total costs of each contract are reviewed on a monthly basis by project management and operations personnel for all active projects. All cost revisions that result in the gross profit as a percent of sales increasing or decreasing by more than two percent are reviewed by senior management personnel.

We begin recognizing revenue on a project when persuasive evidence of an arrangement exists, recoverability is reasonably assured, and project costs are incurred. Costs may be incurred before we have persuasive evidence of an arrangement. In those cases, if recoverability from that arrangement is probable, the project costs are deferred and revenue recognition is delayed.

Changes in job performance, job conditions and estimated profitability, including those arising from contract change orders, contract penalty provisions, foreign currency exchange rate movements, changes in raw materials costs, and final contract settlements may result in revisions to estimates of revenue, costs and income and are recognized in the period in which the revisions are determined. Provisions for losses on uncompleted contracts are made in the period such losses become known.

Revenue from our Tubular Products Group is recognized when all four of the following criteria have been satisfied: persuasive evidence of an arrangement exists; the price is fixed or determinable; delivery has occurred;

24

Table of Contents

and collectability is reasonably assured. Deferred revenue is recorded when the manufacturing process is complete and customers are invoiced prior to physical delivery of the product.

Allowance for Doubtful Accounts:

We maintain allowances for estimated losses resulting from the inability of our customers to make required payments based on historical experience and management’s judgment. The extension and revision of credit is established by obtaining credit rating reports or financial information on the customer. An allowance is recorded based on a variety of factors, including our historical collection experience and our historical product quality claims. At least monthly, we review past due balances to identify the reasons for non-payment. We will write down or write off a receivable account once the account is deemed uncollectible for reasons such as customer quality claims, a contract dispute, deterioration in the customer’s financial position, a bankruptcy filing or other events. We believe the reported allowances at December 31, 2014 are adequate. If the customer’s financial conditions were to deteriorate resulting in their inability to make payments, additional allowances may need to be recorded which would result in additional expenses being recorded for the period in which such determination was made.

Inventories:

Inventories are stated at the lower of cost or market. Determining market value of inventories involves judgments and assumptions made by us, including projecting selling prices and cost of sales. To project market value, we review recent sales and gross profit history, existing customer orders, current contract prices, industry supply and demand, forecasted steel prices, replacement costs, seasonal factors, general economic trends and other information, as applicable. If future market conditions are less favorable than those projected by us, inventory write-downs may be required. At December 31, 2014, the inventory balance of $74.0 million is reported net of lower of cost or market reserves totaling $6.6 million. Raw material inventories of steel are stated at cost either on a specific identification basis or on an average cost basis. All other raw materials, as well as supplies, are stated on an average cost basis. Finished goods are stated at cost using the first-in, first-out method of accounting. Due to recent volatility of energy markets, it is at least reasonably possible that these lower of cost or market reserves will materially change in the near term.

Property and Equipment:

Property and equipment are recorded at cost, and are depreciated using either the units of production method or a straight-line method depending on the classification of the asset. Depreciation expense calculated under the units of production method may be less than, equal to, or greater than depreciation expense calculated under the straight-line method. We evaluate historical and projected units of production at each plant to reassess the units of production expected on an annual basis.

We assess impairment of property and equipment whenever changes in circumstances indicate that the carrying values of the asset group may not be recoverable. The recoverable value of long-lived assets is determined by estimating future undiscounted cash flows using assumptions about our expected future operating performance. Estimates of future cash flows used in the recoverability test incorporate our own assumptions about the use of the asset group and shall consider all available evidence. Our estimates of undiscounted cash flows may differ from actual cash flow due to, among other things, technological changes, economic conditions, or changes to our business operations. If we determine the carrying value of the property and equipment will not be recoverable, we calculate and record an impairment loss. This analysis is performed prior to assessing goodwill for impairment.

Business Combinations and Valuation of Goodwill and Other Acquired Intangible Assets:

We allocate the fair value of purchase consideration to the tangible assets acquired, liabilities assumed and intangible assets acquired based on their estimated fair values. Goodwill is recorded for the excess of the fair

25

Table of Contents

value of purchase consideration over the fair values of these identifiable assets and liabilities. Such valuations require management to make significant estimates and assumptions, especially with respect to intangible assets. Contingent consideration is calculated and recorded at the date of the acquisition. During the measurement period, which does not exceed one year from the acquisition date, we may record adjustments to the assets acquired and liabilities assumed as a result of information received regarding the valuation of assets and liabilities after the acquisition date, with the corresponding offset to goodwill. Upon the conclusion of the measurement period, any subsequent adjustments are recorded to earnings.

Goodwill is reviewed for impairment annually at December 31 or whenever events occur or circumstances change that indicates goodwill may be impaired. Goodwill is tested for impairment at the reporting unit level. A reporting unit is an operating segment or one level below an operating segment (also known as a component). Our reporting units are equivalent to our operating segments as the individual components meet the criteria for aggregation.

Fair value of goodwill is first evaluated under a qualitative approach which takes into account industry and market conditions, cost factors, overall financial performance, and other relevant entity specific events and changes. In the evaluation of our operating segments, we look at the long-term prospects for the reporting units and recognize that current performance may not be the best indicator of future prospects or value, which requires management judgment. If this analysis determines that it is more likely than not that the fair value of goodwill is above its carrying value, no further analysis is required. Alternatively, we may choose to unconditionally bypass the qualitative analysis in favor of a two-step quantitative impairment test.

The first step of this analysis calculates the business enterprise value of the reporting unit by using a combination of income and market approaches. The income approach is based upon projected future after-tax cash flows discounted to present value using factors that consider the timing and risk associated with the future after-tax cash flows. The market approach is based upon historical and/or forward-looking measures using multiples of revenue or earnings before interest, tax, depreciation, and amortization (“EBITDA”). We utilize a weighted average of the income and market approaches, with a heavier weighting on the income approach because of the relatively limited number of direct comparable entities for which relevant multiples are available. If the carrying value of the reporting unit exceeds its calculated enterprise value, then the Company continues to assess the fair value of individual assets and liabilities, other than goodwill. The difference between the reporting unit enterprise value and the fair value of its identifiable net assets is the implied fair value of the reporting unit’s goodwill. A goodwill impairment loss is recorded for the difference between the implied fair value and its carrying value.

Goodwill resulting from the acquisition of Permalok of $5.3 million is included in our Water Transmission Group. The Company elected to perform a quantitative impairment test of the Water Transmission Group’s goodwill in 2014 and concluded that there was no impairment as of December 31, 2014.

Goodwill of $4.4 million related to the sale of the Company’s discontinued OCTG business in March 2014 was written off as part of the loss on sale of business.

Goodwill related to the Company’s Tubular Products Group of $16.1 million was evaluated using a quantitative impairment test. We concluded that there was no implied fair value of the Tubular Products Group goodwill and that it should be completely written off as of December 31, 2014.

If our assumptions about goodwill change as a result of future events or circumstances, and we believe the assets may have declined in value, then further impairment charges will be recorded, resulting in lower profits.

Stock-based Compensation:

We recognize the compensation cost of employee and director services received in exchange for awards of equity instruments based on the grant date estimated fair value of the awards. Share-based compensation cost is

26

Table of Contents

recognized over the period during which the employee or director is required to provide service in exchange for the award, and as forfeitures occur, the associated compensation cost recognized to date is reversed.

We estimate the fair value of Restricted Stock Units (“RSUs”) and Performance Stock Awards (“PSAs”) using the value of the Company’s stock on the date of grant, with the exception of market-based PSAs, for which a Monte Carlo simulation model is used. The Monte Carlo simulation model calculates many potential outcomes for an award and estimates fair value based on the most likely outcome.

Income Taxes:

We account for income taxes using an asset and liability approach that requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been recognized in our consolidated financial statements or tax returns. Valuation allowances are established when necessary to reduce deferred income tax assets to the amount expected to be realized. The determination of our provision for income taxes requires significant judgment, the use of estimates and the interpretation and application of complex tax laws. Our provision for income taxes primarily reflects a combination of income earned and taxed in the various United States federal and state and, to a lesser extent, foreign jurisdictions. Jurisdictional tax law changes, increases or decreases in permanent differences between book and tax items, accruals or adjustments of accruals for unrecognized tax benefits or valuation allowances, and our change in the mix of earnings from these taxing jurisdictions all affect the overall effective tax rate.

We record tax reserves for federal, state, local and international exposures relating to periods subject to audit. The development of reserves for these exposures requires judgments about tax issues, potential outcomes and timing, and is a subjective estimate. We assess our tax positions and record tax benefits for all years subject to examination based upon management’s evaluation of the facts, circumstances, and information available at the reporting dates. For those tax positions where it is more-likely-than-not that a tax benefit will be sustained, we have recorded the largest amount of tax benefit with a greater than 50% likelihood of being realized upon settlement with a tax authority that has full knowledge of all relevant information. For those tax positions where it is not more-likely-than-not that a tax benefit will be sustained, no tax benefit has been recognized in the consolidated financial statements.

27

Table of Contents

Results of Operations

The following table sets forth, for the periods indicated, certain financial information regarding costs and expenses from continuing operations expressed in dollars (in thousands) and as a percentage of total net sales from continuing operations and net sales of our business segments.

Year Ended December 31, 2014 Compared to Year Ended December 31, 2013

Net sales. Net sales from continuing operations increased by $43.9 million to $403.3 million in 2014 from $359.4 million in 2013. One customer accounted for 16% and another customer accounted for 10% of net sales from continuing operations in 2014. One customer also accounted for 15% of net sales from continuing operations in 2013.

28

Table of Contents

Water Transmission sales increased 5.4% to $238.5 million in 2014 from $226.4 million in 2013. The increase in net sales from continuing operations was due to a 36% increase in tons produced partially offset by a 23% decrease in average selling price per ton. The increase in tons produced was partially due to the addition of Permalok in 2014 as well as the timing of production and mix of projects produced during the year compared to 2013. Projects produced in 2013 required more fabrication, which increased the average selling price per ton in 2013 compared to 2014. In addition, a 12% decrease in materials cost per ton also led to a decrease in average selling prices. Lower material costs generally lead to lower contract values, and therefore lower net sales as contractors and municipalities are aware of the input costs and market conditions. Bidding activity, backlog and production levels may vary significantly from period to period affecting sales volumes.

Tubular Products sales from continuing operations increased 23.9% to $164.8 million in 2014 from $133.0 million in 2013. The sales increase was due to a 24% increase in tons sold from 132,800 tons to 164,600 tons. The increase in volume is directly related to our capacity expansion project in Atchison. Selling prices per ton in 2014 were relatively even with 2013. Energy pipe represented 77% of tons sold in 2014 compared to 71% for the same period of 2013. The selling price for energy pipe decreased 3% in 2014 compared with 2013.

Gross profit. Gross profit decreased 32.6% to $40.6 million (10.1% of total net sales from continuing operations) in 2014 from $60.2 million (16.8% of total net sales from continuing operations) in 2013.

Water Transmission gross profit decreased 15.7% to $39.6 million (16.6% of segment net sales from continuing operations) in 2014 from $47.0 million (20.7% of segment net sales from continuing operations) in 2013. The decrease in gross profit was primarily due to the decrease in selling price per ton, partially offset by the increase in tons produced as discussed above. We have experienced significant competition on recent project bids, which has also contributed to decreased gross profit. The mix of projects produced also contributed to the decrease in gross profit. The decrease was partially offset by our cost reduction initiatives, which have reduced overhead costs and labor hours per ton, as well as improvements in quality. Also partially offsetting the above was a $2.7 million reduction of cost of sales primarily related to insurance settlements, which reimbursed the Company for past costs incurred for Portland Harbor Site. (See Item 3, Legal proceedings, and Note 13 of the accompanying consolidated financial statements for additional information on the settlements).

Tubular Products gross profit from continuing operations decreased 92.7% to $1.0 million (0.6% of segment net sales from continuing operations) in 2014 from $13.3 million (10.0% of segment net sales from continuing operations) in 2013. The decrease in gross profit was primarily the result of a 7% increase in steel costs per ton while total average selling prices remained flat. As steel comprises 85% to 90% of Tubular Products costs, this had a significant negative impact on gross profit. Increased imports of energy pipe, low natural gas prices, and volatility of steel prices have negatively impacted gross profits, particularly in energy pipe. In addition, there was a $2.5 million lower of cost or market inventory adjustment recorded during 2014, compared to a $2.2 million lower of cost or market inventory adjustment recorded during 2013. The decrease was partially offset by cost reduction initiatives successfully implemented at our Atchison facility.

Selling, general and administrative expenses. Selling, general and administrative expenses increased 7.1%, to $24.3 million (6.0% of net sales from continuing operations) in 2014 from $22.7 million (6.3% of net sales from continuing operations) in 2013. The increase of $1.6 million compared to the prior year was primarily due to additional selling, general and administrative expenses included with the Permalok acquisition.

Impairment of goodwill. As discussed in Critical Accounting Policies, goodwill related to the Company’s Tubular Products Group of $16.1 million was evaluated for impairment. We concluded that the fair value of the Tubular Products Group was less than its carrying amount at December 31, and engaged a consultant to assist the Company in calculating implied fair value of goodwill for the reporting unit. As a result of that analysis, the entire balance of Tubular Products Group goodwill was written off in 2014. The writedown was a result of the significant decrease in crude oil prices in December 2014. There were no goodwill impairment charges recorded in 2013.

29

Table of Contents

Interest expense. Interest expense decreased to $2.3 million in 2014 from $3.6 million in 2013. The decrease was due to the payoff of our high interest bearing Term Notes in June 2014, and lower borrowings on our line of credit in 2014 compared to 2013.

Income taxes. Despite a loss before income taxes of $1.5 million for continuing operations in 2014, income tax expense from continuing operations is $4.7 million. This compares to income tax expense of $12.4 million, or 36.3% of income before income taxes from continuing operations of $34.0 million in 2013. The effective income tax rate for 2014 was negatively impacted by the $16.1 million goodwill impairment charge we recorded, which is not deductible for income tax purposes; therefore, we did not record any tax benefit for the charge. Our effective income tax rate can change significantly depending on the relationship of permanent income tax deductions and tax credits to pre-tax income or loss. Accordingly, the comparison of effective rates between periods is not necessarily meaningful in all situations.

Year Ended December 31, 2013 Compared to Year Ended December 31, 2012

Net sales. Net sales from continuing operations decreased by $29.5 million to $359.4 million in 2013 from $388.9 million in 2012. One customer accounted for 15% of net sales from continuing operations in 2013. One customer also accounted for 16% of net sales from continuing operations in 2012.

Water Transmission sales decreased 15.9% to $226.4 million in 2013 from $269.2 million in 2012. The decrease in net sales from continuing operations was due to a 39% decrease in tons produced. The decrease in tons produced was impacted by continued weakness in municipal markets. This was partially offset by positive impacts due to the timing of production and mix of projects produced during the year, as well as a 21% increase in materials cost per ton including steel. Higher steel costs generally lead to higher contract values, and therefore higher net sales as contractors and municipalities are aware of the widely available steel costs and market conditions. Bidding activity, backlog and production levels may vary significantly from period to period affecting sales volumes.

Tubular Products sales from continuing operations increased 11.1% to $133.0 million in 2013 from $119.7 million in 2012. The sales increase was due to a 27% increase in tons sold from 104,900 tons to 132,800 tons partially offset by a 12% decrease in average selling price per ton. The decrease in average selling price was due to a 6% decrease in steel cost per ton along with the downward pricing pressure from imported pipe. Increased imports of energy pipe, low natural gas prices, and volatility of steel prices negatively impacted selling prices, particularly in energy pipe. Energy pipe represented 71% of tons sold in 2013 compared to 60% for the same period of 2012. The selling price for energy pipe decreased 16% in 2013 compared with the same period of 2012.

Gross profit. Gross profit increased 1.9% to $60.2 million (16.8% of total net sales from continuing operations) in 2013 from $59.1 million (15.2% of total net sales from continuing operations) in 2012.

Water Transmission gross profit increased 4.2% to $47.0 million (20.7% of segment net sales from continuing operations) in 2013 from $45.1 million (16.7% of segment net sales from continuing operations) in 2012. The increase in gross profit was primarily due to the mix of projects partially offset by the decrease in tons produced as discussed above. The increase in gross profit as a percentage of net sales from continuing operations was driven by a favorable project mix, including the production of the Lake Texoma project, the largest project in our history. The increase in gross profit was also the result of cost reduction initiatives which have reduced overhead costs and labor hours per ton, as well as improvements in quality.

Tubular Products gross profit decreased 5.5% to $13.3 million (10.0% of segment net sales from continuing operations) in 2013 from $14.1 million (11.7% of segment net sales from continuing operations) in 2012. The decrease in gross profit was primarily the result of a $2.2 million lower of cost or market inventory adjustment

30

Table of Contents

recorded during 2013. This was partially offset by a 1.1% decrease in materials cost per ton during 2013. The decrease in materials cost per ton for Tubular Products as compared with the increase in materials cost per ton for Water Transmission was due to timing of purchases. Also offsetting the above were cost reduction initiatives successfully implemented at our Atchison facility.

Selling, general and administrative expenses. Selling, general and administrative expenses decreased 18.4%, to $22.7 million (6.3% of net sales from continuing operations) in 2013 from $27.8 million (7.2% of net sales from continuing operations) in 2012. The decrease of $5.1 million compared to the prior year was due to a $1.1 million decrease in wages and benefits, a $0.9 million decrease in professional fees and outside services primarily due to a reduction in audit related fees, a $0.9 million decrease in administrative and other miscellaneous expenses, a $0.6 million decrease in travel and entertainment, and a $0.5 million decrease in bonus expense.

Interest expense. Interest expense decreased to $3.6 million in 2013 from $5.2 million in 2012. Lower average interest rates and a decrease in amortization expense of deferred financing costs following the refinancing of our Credit Agreement during the fourth quarter of 2012 resulted in decreased Interest expense in 2013 compared to 2012. This was partially offset by higher borrowings in 2013 compared to 2012.

Income taxes. Our effective tax rate from continuing operations was 36.3% and 32.4% in 2013 and 2012, respectively. The difference from the federal statutory rate of 35% was due primarily to the benefit from the section 199 qualified domestic production deduction.

Liquidity and Capital Resources

Sources and Uses of Cash

Our principal sources of liquidity generally include operating cash flow and our Credit Agreement. From time to time our long-term capital needs may be met through the issuance of long-term debt or additional equity. Our principal uses of liquidity generally include capital expenditures, working capital and debt service. Information regarding our cash flows for the twelve months ended December 31, 2014 is presented in our consolidated statements of cash flows contained in this 2014 Form 10-K, and is further discussed below.

As of December 31, 2014, our working capital (current assets minus current liabilities) was $165.7 million as compared to $195.4 million as of December 31, 2013. Cash and cash equivalents totaled $0.5 million as of December 31, 2014 and $0.6 million as of December 31, 2013.

Net Cash Provided by (Used in) Operating Activities

Net cash provided by operating activities in 2014 was $35.0 million. This was primarily the result of our net loss, adjusted by noncash charges of $16.1 million for goodwill impairment, $13.6 million for depreciation and the positive cash flow effect of a decrease in working capital.

Net cash provided by operating activities in 2013 was $20.1 million. This was primarily the result of our net loss, adjusted by noncash charges of $13.3 million for depreciation and $27.5 million for fixed asset impairment charges, partially offset by an overall increase in working capital at December 31, 2013 compared to December 31, 2012.

Net cash provided by operating activities in 2012 was $44.5 million. This was primarily the result of net income adjusted by a noncash charge of $16.2 million for depreciation, and the positive cash flow effect of a decrease in our working capital, including decreases in our accounts receivable of $28.3 million and increases in accrued liabilities of $11.4 million, partially offset by increases in costs and estimated earnings in excess of billings on uncompleted contracts of $36.6 million.

31

Table of Contents

Fluctuations in our working capital accounts result from timing differences between production, shipment, invoicing, and collection, as well as changes in levels of production and costs of materials. We typically have a relatively large investment in working capital, as we generally pay for materials, labor, and other production costs in the initial stages of a project, while payments from our customers are generally received after finished product is delivered. Our revenues in the Water Transmission segment are recognized on a percentage-of-completion method; therefore, cash receipts typically occur subsequent to when revenue is recognized and the elapsed time between when revenue is recorded and when cash is received can be significant. As such, our payment cycle is a significantly shorter interval than our collection cycle, although the effect of this difference in the cycles may vary by project, and from period to period.

Net Cash (Used in) Provided by Investing Activities

Net cash provided by investing activities in 2014 was $15.5 million, primarily due to net proceeds of $29.8 million received from the sale of substantially all of the assets and liabilities associated with the OCTG business, partially offset by capital expenditures of $14.3 million. Capital expenditures in 2014 included $2.5 million for the replacement of the existing front end of our 16 inch mill and $1.8 million for a new hydro tester at our Atchison plant. Net cash used for investing activities for discontinued operations in 2014 was not material. Capital expenditures in 2015 are expected to be approximately $15 million to $16 million for standard capital replacement.

Net cash used in investing activities in 2013 was $48.3 million, primarily related to capital expenditures of $28.5 million for previously disclosed strategic investment projects, $15.7 million for the acquisition of Permalok, and funds disbursed under a notes receivable arrangement of $5.7 million. Previously disclosed strategic investment projects include the installation of an additional horizontal accumulator and hydrotester, and the replacement of the existing front end of the 16 inch mill at our Atchison plant, as well as expansion at our Saginaw plant, which will enable production of pipe up to 126 inches in diameter as well as increase overall capacity. Expenditures for these strategic investments during 2013 included $7.1 million for the replacement of the existing front end of the 16 inch mill and $1.7 million for a new hydrotester at our Atchison plant, and $9.2 million for expansion projects at our Saginaw plant. This was partially offset by proceeds received from the sale of property and equipment of $1.7 million.

Net cash used in investing activities in 2012 was $19.3 million, primarily related to capital expenditures of $16.8 million. These expenditures relate to storm water upgrades at our Portland, Oregon facility and planned capacity expansion in our Tubular Products plants.

Net Cash (Used in) Provided by Financing Activities

Net cash used by financing activities in 2014 was $50.6 million, which resulted primarily from net repayments under our Credit Agreement, long-term debt and capital lease payments totaling $49.9 million.

Net cash provided by financing activities in 2013 was $28.7 million, which resulted primarily from net borrowings of $40.4 million under our Credit Agreement, offset by long-term debt and capital lease payments of $11.0 million.

Net cash used in financing activities in 2012 was $25.3 million, which resulted primarily from net payments of $14.5 million under our Credit Agreement and by long-term debt and capital lease payments of $9.1 million.

We anticipate that our existing cash and cash equivalents, cash flows expected to be generated by operations, and amounts available under our Credit Agreement will be adequate to fund our working capital and capital expenditure requirements for at least the next twelve months. To the extent necessary, we may also satisfy capital requirements through additional bank borrowings, senior notes, term notes, subordinated debt, and capital and operating leases, if such resources are available on satisfactory terms. We have from time to time evaluated

32

Table of Contents

and continue to evaluate opportunities for acquisitions and expansion. Any such transactions, if consummated, may use a portion of our working capital or necessitate additional bank borrowings or other sources of funding.

Line of Credit and Capital Lease Obligations

As of December 31, 2014, our primary component of debt was $45.6 million of borrowings on our line of credit. Our Credit Agreement allows us to borrow up to $165 million, subject to compliance with financial covenants. At December 31, 2014, we had $61.7 million available to borrow under the Credit Agreement while remaining in compliance with the Company’s financial covenants. The Credit Agreement will expire on October 24, 2017. Borrowings under the Credit Agreement are collateralized by substantially all of our personal property.

Under the Credit Agreement, the Company’s borrowings bear interest at LIBOR plus 1.75% to 2.75%, or the lending institution’s prime rate plus 0.75% to 1.75%. The Company was able to borrow at LIBOR plus 2.0% at December 31, 2014. The Credit Agreement bears interest at a weighted average rate of 2.43% at December 31, 2014.

At December 31, 2013, we had $87.9 million outstanding under the Credit Agreement, bearing interest at a weighted average rate of 2.69%.

We had a total of $2.4 million in capital lease obligations outstanding at December 31, 2014. The weighted average interest rate on all of our capital leases is 9.66%. Our capital leases are for certain equipment used in the manufacturing process.

The Credit Agreement and certain lease agreements place various restrictions on our ability to, among other things; incur certain additional indebtedness, create liens or other encumbrances on assets, and incur additional capital expenditures. The Credit Agreement, and certain lease agreements require us to be in compliance with certain financial covenants. The results of our financial covenants as of December 31, 2014 are below.

Based on our business plan and forecasts of operations, we believe we will remain in compliance with our covenants in 2015.

The following table sets forth our scheduled contractual commitments that will affect our future liquidity as of December 31, 2014 (in thousands):

33

Table of Contents

We also have entered into stand-by letters of credit that total approximately $2.3 million as of December 31, 2014. The stand-by letters of credit relate to workers’ compensation insurance. Based on the nature of these arrangements and our historical experience, we do not expect to make any material payments under these arrangements.

Off Balance Sheet Arrangements

We do not have any off balance sheet arrangements that are reasonably likely to have a current or future material effect on our financial position, results of operations or cash flows.

Adoption of New Accounting Pronouncements

The Company adopted ASU No. 2013-11, “Income Taxes: Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists” during the year ended December 31, 2014. The Company adopted ASU No. 2014-08, “Presentation of Financial Statements and Property, Plant and Equipment” on January 1, 2015. For further information about our adoption of new accounting pronouncements, see Note 1 in Part II – Item 8, “Financial Statements and Supplementary Data” of the consolidated financial statements.

The primary market risks affecting our business relate to our exposure to commodity risk, interest rate risk, and foreign currency exchange rate risk.

Commodity Risk

Certain materials we use in our business are classified as commodities traded in the worldwide markets, of which the most significant commodity is steel, used in the manufacturing of pipe. We do not hedge our commodity risk and do not enter into any transactions in commodities for trading purposes. The impact of volatility in steel prices to each of our operating segments varies significantly. This volatility can significantly affect our gross profit. Although we seek to recover increases in steel prices through price increases in our products, we have not always been successful.

Steel comprises approximately 25% to 35% of Water Transmission project costs. As steel represents a substantial portion of our cost of sales, we generally place orders for steel as soon as possible after a project is awarded. Most projects are awarded within thirty to ninety days of the bid date, and thus we are subject to some market fluctuations involving steel. In order to minimize our risk exposure to steel volatility, we typically submit bids based on general assumptions of the price of steel when we would receive a purchase order or contract. In

34

Table of Contents

addition, we typically order steel at the beginning of the project in order to minimize our exposure to fluctuations in steel prices.

By contrast, steel comprises approximately 85% to 90% of total product costs for Tubular Products. Historically, we have been able to adjust our selling prices to reflect fluctuations in our cost of steel; however, we are exposed to volatile steel prices in those instances in which we carry steel inventory that is not already assigned to sales orders. To minimize this risk, we monitor steel inventory and purchasing actions. If steel costs were to decline after December 31, 2014, our Tubular Products division would have approximately two months of steel inventory exposed to the risk of declining gross margins.

Interest Rate Risk

Our debt at December 31, 2014 bears interest at both fixed and variable rates. At December 31, 2014, approximately $45.6 million of our debt accrues interest at a variable rate as compared to $87.9 million at December 31, 2013. Assuming average interest rates and borrowings on variable rate debt, a hypothetical 1.0%, or 100 basis point change in interest rates would not have a material impact on our interest expense in either year.

Foreign Currency Exchange Rate Risk

We transact business in various foreign countries, and, from time to time, settle our transactions in foreign currencies. We have established a program that utilizes foreign currency forward contracts to offset the risk associated with the effects of certain foreign currency exposures, typically arising from sales contracts denominated in Canadian currency. These contracts are not used for trading or for speculative purposes. Foreign currency forward contracts are consistent with our strategy for financial risk management and have maturities generally less than one year. As of December 31, 2014, the total notional amount of these derivative contracts was $1.3 million (CAD$1.5 million), of which we applied hedge accounting to $1.3 million (CAD$1.5 million). At December 31, 2014, none of the Company’s contracts had a remaining maturity of greater than 12 months. As of December 31, 2013, the total notional amount of our derivative contracts was $3.9 million (CAD$4.1 million) of which we applied hedge accounting to $3.8 million (CAD$4.1 million).

A hypothetical 10% change in the Canadian Dollar foreign currency exchange rate would not have a material impact on our reported 2014 or 2013 net sales from continuing operations.

The consolidated financial statements required by this item are included on pages F-1 to F-36 at the end of this 2014 Form 10-K. The financial statement schedule required by this item is included on page S-1. The quarterly information required by this item is included under the caption Quarterly Data (unaudited) in Note 18 of the Notes to Consolidated Financial Statements in Part II—Item 8, “Financial Statements and Supplementary Data” of this 2014 Form 10-K.

None.

Evaluation of Disclosure Controls and Procedures

Disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (“Exchange Act”)) are designed to provide reasonable assurance that information required to be disclosed in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC and that such

35

Table of Contents

information is accumulated and communicated to our management, including the Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), as appropriate, to allow timely decisions regarding required disclosures.

Management, with the participation of our CEO and CFO, evaluated the effectiveness of our disclosure controls and procedures as of the end of the period. Based on their evaluation, our CEO and CFO have concluded that our disclosure controls and procedures were not effective as of December 31, 2014 because of the material weakness in our internal control over financial reporting described below. Notwithstanding the material weakness described below, our management has concluded that the consolidated financial statements for the periods covered by and included in this Annual Report on Form 10-K are fairly stated in all material respects in accordance with generally accepted accounting principles in the United States of America for each of the periods presented herein.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles (“GAAP”). Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that our transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of management and our directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect all misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Under the supervision and with the participation of our management, including our CEO and CFO, we conducted an assessment of the effectiveness of our internal control over financial reporting as of December 31, 2014. In making this assessment, we used the criteria set forth in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

Material Weakness Previously Identified

We previously identified and disclosed in our Amendment No. 1 to our Annual Report on Form 10-K/A (filed on September 4, 2014) for the period ended December 31, 2013, a material weakness in our internal control over financial reporting related to our impairment assessment of goodwill that still exists as of December 31, 2014. As a result, management has concluded that the Company’s internal control over financial reporting was not effective as of December 31, 2014.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim

36

Table of Contents

financial statements will not be prevented or detected on a timely basis. The material weakness in our internal controls over financial reporting as of December 31, 2014 is:

The control deficiency did not result in any adjustments to our annual or interim consolidated financial statements for any period; however, the control deficiency could result in misstatements to the goodwill and impairment of goodwill account balances and disclosures that would result in a material misstatement to the annual or interim consolidated financial statements that would not be prevented or detected. Accordingly, we have determined that this control deficiency constitutes a material weakness.

The effectiveness of our internal control over financial reporting as of December 31, 2014 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears in Part II, Item 8 of this Annual Report.

Changes in Internal Control over Financial Reporting

There have been no changes in our internal control over financial reporting during the quarter ended December 31, 2014 that materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Remediation Plan

In response to the material weakness described above, our management, with the oversight from the Audit Committee of our Board of Directors, is in the process of remediating the underlying causes of the material weakness. As of December 31, 2014, the Company has made progress on several of the actions identified in its Plan of Remediation identified in our Amendment No. 1 to our Annual Report on Form 10-K/A (filed on September 4, 2014) for the period ended December 31, 2013. The Company has enhanced its process documentation and initiated the design of new procedures related to the review of assumptions and data inputs used in the goodwill impairment assessment process. The Company has completed its design and implementation of controls specifically related to the evaluation of changes in events and circumstances which occur between annual impairment tests. These steps resulted in improvements to the process, but the Company recognizes additional steps related to the design, implementation, and evaluation of its control procedures are necessary to remediate this material weakness.

We will take the following further actions in order to remediate this material weakness as soon as practicable:

We believe these additional internal controls, when fully designed, implemented, and operating, will be effective in remediating the material weakness described above. As these controls predominately operate on an

37

Table of Contents

annual or an as needed basis, as in the case of an interim triggering event, this material weakness is not likely to be remediated at least until December 31, 2015. As we continue to evaluate and work to improve our internal control over financial reporting, management may determine to take additional measures to address the material weakness or determine to modify the remediation plan described above. Until the remediation steps set forth above are fully implemented, the material weakness described above will continue to exist.

None.

38

Table of Contents

PART III

Directors, Executive Officers, Promoters and Control Persons

The information required by Paragraph (a), and Paragraphs (c) through (g) of Item 401 of Regulation S-K (except for information required by Paragraph (e) of that Item to the extent the required information pertains to our executive officers) and Item 405 of Regulation S-K is hereby incorporated by reference from our definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions Election of Directors and Section 16(A) Beneficial Ownership Reporting Compliance.

Scott Montross has served as our Director, President and CEO since January 1, 2013. Mr. Montross joined the Company in May, 2011 and served as our Executive Vice President and Chief Operating Officer. Mr. Montross has served in Senior Vice President level positions since 2003 with commercial, operational, and planning responsibilities and has spent a total of 23 years in the steel industry prior to joining the Company. Mr. Montross previously served as the Executive Vice President of the Flat Products Group for Evraz Inc. NA’s Oregon Steel Division from 2010 to 2011, as the Vice President and General Manager of Evraz, Inc. NA from 2007 to 2010, as the Vice President of Marketing and Sales for Oregon Steel Mills, Inc. from 2003 to 2006, and as the Vice President of Marketing and Sales for National Steel Corporation from 2002 to 2003.

Robin Gantt has served as our Senior Vice President and CFO since January 2011 having joined the Company in July 2010. Ms. Gantt served as the CFO and Treasurer of Evraz Inc. NA from September 2007 through January 2010. From July 2005 through August 2007, Ms. Gantt served as Corporate Controller of Oregon Steel Mills, Inc., which became Evraz Inc. NA after its acquisition by Evraz Group SA in January 2007. Ms. Gantt joined Oregon Steel Mills, Inc. in 1999, holding several finance and accounting positions of increasing responsibility before being appointed to Controller in 2005.

Richard Baum joined the Company in April, 2011 and serves as our Senior Vice President, General Counsel and Corporate Secretary. Mr. Baum was a litigation partner with the law firm of Lane Powell LLP from January 1, 2011 through April 2011. Prior to that, he was a litigation partner with the law firm of Roberts Kaplan LLP from November 2008 through December 2010, and was a litigation attorney with the law firm of Perkins Coie LLP from September 1982 through October 2008, including twenty years as a partner. Mr. Baum’s private practice focused on commercial litigation with an emphasis on securities litigation and corporate governance issues.

Martin Dana has served as our Executive Vice President, Sales and Marketing since April 2014. Previous positions at the Company held by Mr. Dana include Executive Vice President, Tubular Products Group, Vice President of Operations for Tubular Products, Vice President of Sales and Marketing for the Water Transmission Group, and other management and Vice President level positions since joining the Company in 1999. Prior to joining the Company, Mr. Dana held positions at Oregon Steel Mills.

Robert L. Mahoney has served as our Senior Vice President, Strategy and Business Development since January 2012, responsible for identifying and securing growth opportunities across the Company. He had served

39

Table of Contents

as the Senior Vice President, Tubular Products Group, since June 2007, as Vice President, Chief Strategic Officer since May 2005, as Vice President, Corporate Development since July 1998, and as Director of Business Planning and Development since 1996. Mr. Mahoney has been with the Company since 1992.

William Smith has served as our Executive Vice President, Operations since April 2014. Prior to that, Mr. Smith served as our Executive Vice President, Water Transmission Group, and as Vice President of Operations for Water Transmission. Prior to joining the Company in 2010, Mr. Smith spent 14 years with Ameron International Corporation, holding several key positions including President, Water Transmission. A 38-year veteran of the steel pipe business, Mr. Smith has held positions with United Concrete Pipe, Thompson Steel Pipe and LB Foster.

Code of Ethics

We have adopted a Code of Business Conduct and Ethics for all employees and a Code of Ethics for Senior Financial Officers. Copies can be found on our website at www.nwpipe.com in the Corporate Governance area of the Investor Relations section or by writing to Northwest Pipe Company, attn. Corporate Secretary, 5721 SE Columbia Way, Suite 200, Vancouver, WA 98661. None of the material on our website is part of this 2014 Form 10-K. If there is any waiver from any provision of either the Code of Business Conduct and Ethics or the Code of Ethics for Senior Financial Officers, we will disclose the nature of such waiver on our website or in a Current Report on Form 8-K.

Corporate Governance

The information required by Items 407(c)(3), (d)(4) and (d)(5) of Regulation S-K is hereby incorporated by reference from our definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions Nominating and Governance Committee; Nominations by Shareholders and Audit Committee.

The information required by this Item is hereby incorporated by reference from our definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions Executive Compensation, Compensation Committee Interlocks and Insider Participation, and Compensation Committee Report.

The following table provides information as of December 31, 2014, with respect to the shares of our common stock that may be issued under our existing equity compensation plans.

40

Table of Contents

The information required by Item 403 of Regulation S-K is included in our definitive proxy statement for the 2015 Annual Meeting of Shareholders under the caption Stock Owned by Management and Principal Shareholders and is incorporated herein by reference.

The information required by this Item is hereby incorporated by reference from our definitive proxy statement for the 2015 Annual Meeting of Shareholders under the captions Certain Relationships and Related Transactions and Election of Directors.

The information required by this Item is hereby incorporated by reference from our definitive proxy statement for the 2015 Annual Meeting of Shareholders under the caption Independent Registered Public Accounting Firm.

41

Table of Contents

PART IV

(a) (1) Consolidated Financial Statements

The consolidated financial statements, together with the reports thereon of PricewaterhouseCoopers LLP are included on the pages indicated below.

(a) (2) Financial Statement Schedule

The following schedule is filed herewith:

Schedules not listed above have been omitted because the information required to be set forth therein is not applicable or is included in the consolidated financial statements or notes thereto.

(a) (3) Exhibits included herein:

42

Table of Contents

43

Table of Contents

44

Table of Contents

45

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of Northwest Pipe Company

In our opinion, the accompanying consolidated balance sheets and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity and cash flows present fairly, in all material respects, the financial position of Northwest Pipe Company and its subsidiaries at December 31, 2014 and 2013, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2014 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company did not maintain, in all material respects, effective internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) because a material weakness in internal control over financial reporting related to the Company not designing and maintaining effective controls over its impairment assessment of goodwill existed as of that date. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. The material weakness referred to above is described in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. We considered this material weakness in determining the nature, timing, and extent of audit tests applied in our audit of the December 31, 2014 consolidated financial statements and our opinion regarding the effectiveness of the Company’s internal control over financial reporting does not affect our opinion on those consolidated financial statements. The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in management’s report referred to above. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

F-1

Table of Contents

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

Portland, Oregon

March 16, 2015

F-2

Table of Contents

NORTHWEST PIPE COMPANY AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

F-3

Table of Contents

NORTHWEST PIPE COMPANY

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

(In thousands)

The accompanying notes are an integral part of these consolidated financial statements

F-4

Table of Contents

NORTHWEST PIPE COMPANY AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(Dollar amounts in thousands, except share and per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

F-5

Table of Contents

NORTHWEST PIPE COMPANY AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(Dollar amounts in thousands)

The accompanying notes are an integral part of these consolidated financial statements.

F-6

Table of Contents

NORTHWEST PIPE COMPANY AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(Dollar amounts in thousands)