OLYMPIC STEEL INC - Quarter Report: 2022 June (Form 10-Q)

Olympic Steel, Inc.

Index to Form 10-Q

Part I. FINANCIAL INFORMATION

Item 1. Financial Statements

Olympic Steel, Inc.

Consolidated Balance Sheets

(in thousands)

The accompanying notes are an integral part of these consolidated statements.

Olympic Steel, Inc.

Consolidated Statements of Comprehensive Income

For the Three and Six Months Ended June 30,

(in thousands, except per share data)

The accompanying notes are an integral part of these consolidated statements.

Olympic Steel, Inc.

Consolidated Statements of Cash Flows

For the Six Months Ended June 30,

(in thousands)

The accompanying notes are an integral part of these consolidated statements.

Olympic Steel, Inc.

Supplemental Disclosures of Cash Flow Information

For the Six Months Ended June 30,

(in thousands)

The Company incurred a nominal amount of financing lease obligations during the six months ended June 30, 2022. The Company incurred no new financing lease obligations during the six months ended June 30, 2021. These non-cash transactions have been excluded from the Consolidated Statements of Cash Flows for the six months ended June 30, 2022.

The accompanying notes are an integral part of these consolidated statements.

Olympic Steel, Inc.

Consolidated Statements of Shareholders’ Equity

(in thousands)

The accompanying notes are an integral part of these consolidated statements.

Olympic Steel, Inc.

Notes to Unaudited Consolidated Financial Statements

June 30, 2022

The accompanying consolidated financial statements have been prepared from the financial records of Olympic Steel, Inc. and its wholly-owned subsidiaries (collectively, Olympic or the Company), without audit and reflect all normal and recurring adjustments which are, in the opinion of management, necessary to fairly state the results of the interim periods covered by this report. Year-to-date results are not necessarily indicative of 2022 annual results and these financial statements should be read in conjunction with the Company’s Annual Report on Form 10-K for the year ended December 31, 2021. All intercompany transactions and balances have been eliminated in consolidation.

The Company operates in three reportable segments; specialty metals flat products, carbon flat products, and tubular and pipe products. The specialty metals flat products segment and the carbon flat products segment are at times consolidated and referred to as the flat products segments. Some of the flat products segments’ assets and resources are shared by the specialty metals and carbon flat products segments, and both segments’ products are stored in the shared facilities and, in some locations, processed on shared equipment. As such, total assets and capital expenditures are reported in the aggregate for the flat products segments. Due to the shared assets and resources, certain of the flat products segment expenses are allocated between the specialty metals flat products segment and the carbon flat products segment based upon an established allocation methodology.

The primary focus of our specialty metals flat products segment is on the direct sale and distribution of processed stainless and aluminum flat-rolled sheet and coil products, flat bar products and fabricated parts. Through the acquisition of Shaw Stainless & Alloys, Inc. (Shaw) on October 1, 2021 and Action Stainless & Alloys, Inc. (Action Stainless) on December 14, 2020, our specialty metals flat products segment expanded its geographic footprint and enhanced its product offerings in stainless steel and aluminum plate, sheet, angles, rounds, flat bar, tubing and pipe. Through the acquisition of Berlin Metals, LLC (Berlin Metals) on April 2, 2018, the specialty metals flat products segment expanded its product offerings to include differing types of stainless flat-rolled sheet and coil and prime tin mill products.

The primary focus of our carbon flat products segment is on the direct sale and distribution of large volumes of processed carbon and coated flat-rolled sheet, coil and plate products, and fabricated parts. We act as an intermediary between metals producers and manufacturers that require processed metal for their operations. We serve customers in most metals consuming industries, including manufacturers and fabricators of transportation and material handling equipment, construction and farm machinery, storage tanks, environmental and energy generation equipment, automobiles, military vehicles and equipment, as well as general and plate fabricators and metal service centers. We distribute these products primarily through a direct sales force. Combined, the carbon and specialty metals flat products segments have 34 strategically-located processing and distribution facilities in the United States and one in Monterrey, Mexico. Our geographic footprint allows us to focus on regional customers and larger national and multi-national accounts, primarily located throughout the midwestern, eastern and southern United States. On September 17, 2021, we sold substantially all of the assets related to our Detroit, Michigan operation to Venture Steel (U.S.). The Detroit operation was primarily focused on the distribution of carbon flat-rolled steel to domestic automotive manufacturers and their suppliers.

The tubular and pipe products segment consists of the Chicago Tube and Iron (CTI) business, acquired in 2011. Through our tubular and pipe products segment, we distribute metal tubing, pipe, bar, valves and fittings and fabricated pressure parts supplied to various industrial markets. Founded in 1914, CTI operates from seven locations in the Midwestern and southeastern United States. The tubular and pipe products segment distributes its products primarily through a direct sales force.

Corporate expenses are reported as a separate line item for segment reporting purposes. Corporate expenses include the unallocated expenses related to managing the entire Company (i.e., all three segments), including payroll expenses for certain personnel, expenses related to being a publicly traded entity such as board of directors’ expenses, audit expenses, and various other professional fees.

Impact of Recently Issued Accounting Pronouncements

In March 2020, the Financial Accounting Standards Board, (FASB), issued Accounting Standards Update, (ASU), No. 2020-04, “Reference Rate Reform (Topic 848): Facilitation of the Effects of Reference Rate Reform on Financial Reporting”. The objective of this ASU is to ease the potential burden in accounting for (or recognizing the effects of) reference rate reform on financial reporting. The amendments in this ASU are elective and apply to all entities, subject to meeting certain criteria, that have contracts, hedging relationships and other transactions that reference LIBOR or another reference rate expected to be discontinued because of reference rate reform. The Company is currently evaluating the impact of the adoptions of this ASU; however, the Company does not expect the adoption to have a material impact on the Company’s Consolidated Financial Statements.

The Company provides metals processing, distribution and delivery of large volumes of processed carbon, coated flat-rolled sheet, coil and plate products, aluminum, and stainless flat-rolled products, prime tin mill products, flat bar products, metal tubing, pipe, bar, valves, fittings and fabricated parts. The Company's contracts with customers are comprised of purchase orders with standard terms and conditions. Occasionally the Company may also have longer-term agreements with customers. Substantially all of the contracts with customers require the delivery of metals, which represent single performance obligations that are satisfied at a point in time upon transfer of control of the product to the customer.

Transfer of control is assessed based on the use of the product distributed and rights to payment for performance under the contract terms. Transfer of control and revenue recognition for substantially all of the Company’s sales occur upon shipment or delivery of the product, which is when title, ownership and risk of loss pass to the customer and is based on the applicable shipping terms. The shipping terms depend on the customer contract. An invoice for payment is issued at time of shipment and terms are generally net 30 days. The Company has certain fabrication contracts in one business unit for which revenue is recognized over time as performance obligations are achieved. This fabrication business is not material to the Company's consolidated results.

Within the metals industry, revenue is frequently disaggregated by products sold. The table below disaggregates the Company’s revenues by segment and products sold.

Accounts receivable are presented net of allowances for credit losses and unissued credits of $4.6 million and $4.4 million as of June 30, 2022 and December 31, 2021, respectively. The allowance for credit losses is maintained at a level considered appropriate based on historical experience, specific customer collection issues that have been identified, current market conditions and estimates for supportable forecasts when appropriate. Estimations are based upon a calculated percentage of accounts receivable, which remains fairly level from year to year, and judgments about the probable effects of economic conditions on certain customers, which can fluctuate significantly from year to year. The Company cannot guarantee that the rate of future credit losses will be similar to past experience. The Company considers all available information when assessing the adequacy of its allowance for credit losses and unissued credits.

Inventories consisted of the following:

The Company values certain of its tubular and pipe products inventory at the last-in, first-out (LIFO) method. At June 30, 2022 and December 31, 2021, approximately $57.1 million, or 11.2% of consolidated inventory, and $55.4 million, or 11.4% of consolidated inventory, respectively, was reported under the LIFO method of accounting. The cost of the remainder of the tubular and pipe products inventory is determined using a weighted average rolling first-in, first-out (FIFO) method.

The Company did not record any LIFO expense or income for the three and six months ended June 30, 2022 as current inventory price and volume projections anticipate no material change to the LIFO reserve by December 31, 2022. During the three and six months ended June 30, 2021, the Company recorded $4.0 million and $5.0 million of LIFO expense, respectively.

If the FIFO method had been in use, inventories would have been $19.7 million higher than reported at June 30, 2022 and December 31, 2021.

The Company’s intangible assets were recorded in connection with its acquisitions that occurred between 2011 and 2021. The intangible assets were evaluated on the premise of highest and best use to a market participant, primarily utilizing the income approach valuation methodology. The useful life of the customer relationships was determined to be between 10 and 15 years, based primarily on the consistent and predictable revenue source associated with the existing customer base, the present value of which extends through the 10- and 15-year amortization periods. The useful life of the non-compete agreements was determined to be the length of the non-compete agreements, which range from one to five years. The useful life of the trade names was determined to be indefinite primarily due to their history and reputation in the marketplace, the Company’s expectation that the trade names will continue to be used and the conclusion that there are currently no other factors identified that would limit their useful life. The Company will continue to evaluate the useful life assigned to its amortizable customer relationships and noncompete agreements in future periods.

Goodwill, by reportable unit, was as follows as of June 30, 2022 and December 31, 2021, respectively. The goodwill is deductible for tax purposes.

Intangible assets consisted of the following as of June 30, 2022 and December 31, 2021, respectively:

The Company estimates that amortization expense for its intangible assets subject to amortization will be approximately $1.6 million per year for the next three years, $1.2 million the following year and then $0.7 million for the next year after.

The components of lease expense were as follows:

Supplemental cash flow information related to leases was as follows:

Supplemental balance sheet information related to leases was as follows:

Maturities of lease liabilities were as follows:

The Company’s debt is comprised of the following components:

The Company’s asset-based credit facility (the ABL Credit Facility) is collateralized by the Company’s accounts receivable, inventory and personal property. The $475 million ABL Credit Facility consists of: (i) a revolving credit facility of up to $445 million, including a $20 million sub-limit for letters of credit, and (ii) a first in, last out revolving credit facility of up to $30 million. Under the terms of the ABL Credit Facility, the Company may, subject to the satisfaction of certain conditions, request additional commitments under the revolving credit facility in the aggregate principal amount of up to $200 million to the extent that existing or new lenders agree to provide such additional commitments, and add real estate as collateral at the Company’s discretion. The ABL Facility matures on June 16, 2026.

The ABL Credit Facility contains customary representations and warranties and certain covenants that limit the ability of the Company to, among other things: (i) incur or guarantee additional indebtedness; (ii) pay distributions on, redeem or repurchase capital stock or redeem or repurchase subordinated debt; (iii) make investments; (iv) sell assets; (v) enter into agreements that restrict distributions or other payments from restricted subsidiaries to the Company; (vi) incur liens securing indebtedness; (vii) consolidate, merge or transfer all or substantially all of the Company’s assets; and (viii) engage in transactions with affiliates. In addition, the ABL Credit Facility contains a financial covenant which requires if any commitments or obligations are outstanding and the Company’s availability is less than the greater of $30 million or 10.0% of the aggregate amount of revolver commitments ($47.5 million at June 30, 2022) or 10.0% of the aggregate borrowing base ($47.5 million at June 30, 2022), then the Company must maintain a ratio of Earnings before Interest, Taxes, Depreciation and Amortization (EBITDA) minus certain capital expenditures and cash taxes paid to fixed charges of at least 1.00 to 1.00 for the most recent twelve fiscal month period.

The Company has the option to borrow under its revolver based on the agent’s base rate plus a premium ranging from 0.00% to 0.25% or the London Interbank Offered Rate (LIBOR) plus a premium ranging from 1.25% to 2.75%.

On January 10, 2019, the Company entered into a five-year forward starting fixed rate interest rate hedge in order to eliminate the variability of cash interest payments on $75 million of the outstanding LIBOR based borrowings under the ABL Credit Facility. The interest rate hedge fixed the rate at 2.57%. Although the Company is exposed to credit loss in the event of nonperformance by the other party to the interest rate hedge agreement, the Company anticipates performance by the counterparty.

As of June 30, 2022, the Company was in compliance with its covenants and had approximately $183 million of availability under the ABL Credit Facility.

As of June 30, 2022, and December 31, 2021, $1.4 million and $1.6 million, respectively, of bank financing fees were included in “Prepaid expenses and other” and “Other long-term assets” on the accompanying Consolidated Balance Sheets. The financing fees are being amortized over the five-year term of the ABL Credit Facility and are included in “Interest and other expense on debt” on the accompanying Consolidated Statements of Comprehensive Income.

Metals swaps and embedded customer derivatives

During the first six months of 2022 and 2021, the Company entered into nickel swaps indexed to the London Metal Exchange (LME) price of nickel with third-party brokers. The nickel swaps are accounted for as derivatives for accounting purposes. The Company entered into them to mitigate its customers’ risk of volatility in the price of metals. The outstanding nickel swaps mature in 2022. The swaps are settled with the brokers at maturity. The economic benefit or loss arising from the changes in fair value of the swaps is contractually passed through to the customer. The primary risk associated with the metals swaps is the ability of customers or third-party brokers to honor their agreements with the Company related to derivative instruments. If the customer or third-party brokers are unable to honor their agreements, the Company’s risk of loss is the fair value of the metals swaps.

These derivatives have not been designated as hedging instruments. The periodic changes in fair value of the metals and embedded customer derivative instruments are included in “Cost of materials sold” in the Consolidated Statements of Comprehensive Income. The Company recognizes derivative positions with both the customer and the third party for the derivatives and classifies cash settlement amounts associated with them as part of “Cost of materials sold” in the Consolidated Statements of Comprehensive Income. The cumulative change in fair value of the metals swaps that had not yet settled as of June 30, 2022 are included in “Other Accrued Liabilities”, and the embedded customer derivatives are included in “Accounts Receivable, net” on the Consolidated Balance Sheets as of June 30, 2022.

Fixed rate interest rate hedge

On January 10, 2019, the Company entered into a five-year forward starting fixed rate interest rate hedge in order to eliminate the variability of cash interest payments on $75 million of the outstanding LIBOR based borrowings under the ABL Credit Facility. The interest rate hedge fixed the rate at 2.57%. The interest rate hedge is included in “Other long-term liabilities” on the Consolidated Balance Sheets as of June 30, 2022. Although the Company is exposed to credit loss in the event of nonperformance by the other party to the interest rate hedge agreement, the Company anticipates performance by the counterparty.

The table below shows the total impact to the Company’s Consolidated Statements of Comprehensive Income through net income of the derivatives for the three and six months ended June 30, 2022 and 2021, respectively.

During the six months ended June 30, 2022, there were no transfers of financial assets between Levels 1, 2 or 3 fair value measurements. There have been no changes in the methodologies used at June 30, 2022 since December 31, 2021.

The following table presents information about the Company’s assets and liabilities that were measured at fair value on a recurring basis and indicates the fair value hierarchy of the valuation techniques utilized by the Company:

The value of the items not recorded at fair value represent the carrying value of the liabilities.

The carrying value of the ABL Credit Facility was $287.9 million and $327.8 million at June 30, 2022 and December 31, 2021, respectively. As the ABL Credit Facility was amended on June 16, 2021, management believes that its carrying value approximates fair value.

On January 10, 2019, the Company entered into a five-year forward starting fixed rate interest rate hedge in order to eliminate the variability of cash interest payments on $75 million of the outstanding LIBOR based borrowings under the ABL Credit Facility. The interest rate hedge fixed the rate at 2.57%. The fair value of the interest rate hedge of $0.6 million, net of tax of $0.2 million is included in “Accumulated other comprehensive loss” on the Consolidated Balance Sheets at June 30, 2022. The fair value of the interest rate hedge was $2.7 million, net of tax of $0.7 million at December 31, 2021.

Restricted Stock Units and Performance Share Units

Pursuant to the Amended and Restated Olympic Steel 2007 Omnibus Incentive Plan (the Incentive Plan), the Company may grant stock options, stock appreciation rights, restricted shares, restricted share units (RSUs), performance shares, and other stock- and cash-based awards to employees and directors of, and consultants to, the Company and its affiliates. Since adoption of the Incentive Plan, 1,400,000 shares of common stock have been authorized for equity grants.

On an annual basis, the compensation committee of the Company’s Board of Directors awards RSUs to each non-employee director as part of their annual compensation. The annual awards for 2022 and 2021 per director were $80,000. Subject to the terms of the Incentive Plan and the RSU agreement, the RSUs vest after one year of service (from the date of grant). The RSUs are not converted into shares of common stock until the director either resigns or is terminated from the board of directors.

Prior to 2021, under the Incentive Plan, each eligible participant was awarded RSUs with a dollar value equal to 10% of the participant’s base salary, up to an annual maximum of $17,500. The RSUs have a five-year vesting period and the RSUs convert into the right to receive shares of common stock upon a participant’s retirement, or earlier upon the participant’s death or disability or upon a change in control of the Company. Due to the COVID-19 pandemic, no RSU awards were granted in 2021.

In January 2022, the Company adopted a new C-Suite Long-Term Incentive Plan (the C-Suite Plan) that operates under the Senior Manager Stock Incentive Plan. Under the C-Suite Plan, the Chief Executive Officer, the Chief Financial Officer and the President and Chief Operating Officer are eligible for participation. In each calendar year, eligible participants may be awarded a long-term incentive of both an RSU grant and a performance stock unit (PSU) grant. The total long-term award target is $1.1 million for the Chief Executive Officer, $0.3 million for the Chief Financial Officer and $0.6 million for the President and Chief Operating Officer. The PSUs will vest if the return on net assets, calculated as EBITDA divided by Average Accounts Receivable, Inventory and Property and Equipment, exceeds 5%. Each RSU and service-based cash incentive vests three years after the grant date. Each vested RSU will convert into the right to receive one share of common stock. During the first quarter of 2022, 20,000 RSUs and 20,000 PSUs were granted to the participants under the C-Suite Plan.

Stock-based compensation expense recognized on RSUs for the three and six months ended June 30, 2022 and 2021, respectively, is summarized in the following table:

All pre-tax charges related to RSUs were included in the caption “Administrative and general” on the accompanying Consolidated Statements of Comprehensive Income.

The following table summarizes the activity related to RSUs for the six months ended June 30, 2022 and 2021, respectively:

For the three months ended June 30, 2022, the Company recorded an income tax provision of $14.0 million, or 27.1%, compared to an income tax provision of $10.8 million, or 26.6%, for the three months ended June 30, 2021. For the six months ended June 30, 2022, the Company recorded an income tax provision of $27.8 million, or 27.0%, compared to an income tax provision of $18.7 million, or 26.6%, for the six months ended June 30, 2021.

The tax provision for the interim period is determined using an estimate of the Company’s annual effective tax rate, adjusted for discrete items that are taken into account in the relevant period. Each quarter, the Company updates the estimate of the annual effective tax rate, and if the estimated tax rate changes, the Company makes a cumulative adjustment.

The quarterly tax provision and the quarterly estimate of the annual effective tax rate is subject to significant volatility due to several factors, including variability in accurately predicting the Company’s pre-tax and taxable income and the mix of jurisdictions to which they relate, changes in law and relative changes of expenses or losses for which tax benefits are not recognized. Additionally, the effective tax rate can be more or less volatile based on the amount of pre-tax income. For example, the impact of discrete items and non-deductible expenses on the effective tax rate is greater when the pre-tax income is lower.

Earnings per share have been calculated based on the weighted average number of shares outstanding as set forth below:

On October 2, 2015, the Company announced that its Board of Directors authorized a stock repurchase program of up to 550,000 shares of the Company’s issued and outstanding common stock, which could include open market repurchases, negotiated block transactions, accelerated stock repurchases or open market solicitations for shares, all or some of which may be effected through Rule 10b5-1 plans. Any of the repurchased shares are held in the Company’s treasury, or canceled and retired as the Board may determine from time to time. Any repurchases of common stock are subject to the covenants contained in the ABL Credit Facility. Under the ABL Credit Facility, the Company may repurchase common stock and pay dividends up to $5.0 million in the aggregate during any trailing twelve months without restrictions. Purchases of common stock or dividend payments in excess of $5.0 million in the aggregate require the Company to (i) maintain availability in excess of 20.0% of the aggregate revolver commitments ($95.0 million at June 30, 2022) or (ii) to maintain availability equal to or greater than 15.0% of the aggregate revolver commitments ($71.3 million at June 30, 2022) and the Company must maintain a pro-forma ratio of EBITDA minus certain capital expenditures and cash taxes paid to fixed charges of at least 1.00 to 1.00.

There were no shares repurchased during the three and six months ended June 30, 2022 or June 30, 2021. As of June 30, 2022, 360,212 shares remain authorized for repurchase under the program.

On September 3, 2021, the Company commenced an at-the market (ATM) equity program under its shelf registration statement, which allows it to sell and issue up to $50 million in shares of its common stock from time to time. The Company entered into an Equity Distribution Agreement on September 3, 2021 with KeyBanc Capital Markets Inc. (KeyBanc) relating to the issuance and sale of shares of common stock pursuant to the program. KeyBanc is not required to sell any specific amount of securities but will act as the Company’s sales agent using commercially reasonable efforts consistent with its normal trading and sales practices, on mutual agreed terms between KeyBanc and the Company. KeyBanc will be entitled to compensation for shares sold pursuant to the program of 2.0% of the gross proceeds of any shares of common stock sold under the Equity Distribution Agreement. No shares were sold under the ATM program during the three and six months ended June 30, 2022.

The Company follows the accounting guidance that requires the utilization of a “management approach” to define and report the financial results of operating segments. The management approach defines operating segments along the lines used by the Company’s chief operating decision maker (CODM) to assess performance and make operating and resource allocation decisions. The CODM evaluates performance and allocates resources based primarily on operating income (loss). The operating segments are based primarily on internal management reporting.

The Company operates in three reportable segments; specialty metals flat products, carbon flat products, and tubular and pipe products. The specialty metals flat products segment and the carbon flat products segment are at times consolidated and referred to as the flat products segments, as certain of the flat products segments’ assets and resources are shared by the specialty metals and carbon flat products segments and both segments’ products are stored in the shared facilities and, in some locations, processed on shared equipment.

Corporate expenses are reported as a separate line item for segment reporting purposes. Corporate expenses include the unallocated expenses related to managing the entire Company (i.e., all three segments), including compensation for certain personnel, expenses related to being a publicly traded entity such as board of directors’ expenses, audit expenses and various other professional fees.

The following table provides financial information by segment and reconciles the Company’s operating income by segment to the consolidated income before income taxes for the three and six months ended June 30, 2022 and 2021, respectively.

There were no material revenue transactions between the specialty metals products, carbon flat products and tubular and pipe products segments.

The Company sells certain products internationally, primarily in Canada and Mexico. International sales are immaterial to the consolidated financial results and to the individual segments’ results.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis should be read in conjunction with our unaudited consolidated financial statements and accompanying notes contained herein and our consolidated financial statements, accompanying notes and Management’s Discussion and Analysis of Financial Condition and Results of Operations contained in our Annual Report on Form 10-K for the year ended December 31, 2021. The following Management’s Discussion and Analysis of Financial Condition and Results of Operations contain forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from the results discussed in the forward-looking statements. Factors that might cause a difference include, but are not limited to, those discussed under Item 1A (Risk Factors) in our Annual Report on Form 10-K for the year ended December 31, 2021, and in Part II, Item 1A (Risk Factors) in this Quarterly Report on Form 10-Q. The following section is qualified in its entirety by the more detailed information, including our financial statements and the notes thereto, which appear elsewhere in this Quarterly Report on Form 10-Q.

Forward-Looking Information

This Quarterly Report on Form 10-Q and other documents we file with the Securities and Exchange Commission, or SEC, contain various forward-looking statements that are based on current expectations, estimates, forecasts and projections about our future performance, business, our beliefs and management’s assumptions. In addition, we, or others on our behalf, may make forward-looking statements in press releases or written statements, or in our communications and discussions with investors and analysts in the normal course of business through meetings, conferences, webcasts, phone calls and conference calls. Words such as “may,” “will,” “anticipate,” “should,” “intend,” “expect,” “believe,” “estimate,” “project,” “plan,” “potential,” and “continue,” as well as the negative of these terms or similar expressions, are intended to identify forward-looking statements, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements are subject to certain risks and uncertainties that could cause our actual results to differ materially from those implied by such statements including, but not limited to:

Should one or more of these or other risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those anticipated, intended, expected, believed, estimated, projected or planned. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. We undertake no obligation to republish revised forward-looking statements to reflect the occurrence of unanticipated events or circumstances after the date hereof, except as otherwise required by law.

Overview

We are a leading metals service center that operates in three reportable segments; specialty metals flat products, carbon flat products, and tubular and pipe products. We provide metals processing and distribution services for a wide range of customers. Our specialty metals flat products segment’s focus is on the direct sale and distribution of processed aluminum and stainless flat-rolled sheet and coil products, flat bar products, prime tin mill products and fabricated parts. Through the acquisition of Shaw Stainless & Alloy, or Shaw, on October 1, 2021, and Action Stainless & Alloys, Inc., or Action Stainless, on December 14, 2020, our specialty metals flat products segment expanded its geographic footprint and enhanced its product offerings in stainless steel and aluminum plate, sheet, angles, rounds, flat bar, tubing and pipe. Shaw also manufactures and distributes stainless steel bollards and water treatment systems. Action Stainless offers a range of processing, including plasma, laser and waterjet cutting and computer numerical control, or CNC, machining. Our carbon flat products segment’s focus is on the direct sale and distribution of large volumes of processed carbon and coated flat-rolled sheet, coil and plate products and fabricated parts. In addition, our carbon flat products segment’s product offerings include self-dumping metal hoppers and carbon and stainless-steel dump inserts for pickup truck and service truck beds. On September 17, 2021, the Company sold substantially all of the assets related to its Detroit operation. The Detroit operation was primarily focused on the distribution of carbon flat-rolled steel to domestic automotive manufacturers and their suppliers and primarily included in the carbon flat products segment. In addition, we distribute metal tubing, pipe, bar, valves and fittings and fabricate pressure parts supplied to various industrial markets through our tubular and pipe products segment. Products that require more value-added processing generally have a higher gross profit. Accordingly, our overall gross profit is affected by, among other things, product mix, the amount of processing performed, the demand for and availability of metals, and volatility in selling prices and material purchase costs. We also perform toll processing of customer-owned metals. We sell certain products internationally, primarily in Canada and Mexico. International sales are immaterial to our consolidated financial results and to the individual segments’ results.

Our results of operations are affected by numerous external factors, including, but not limited to: general and global business, economic, financial, banking and political conditions; fluctuations in the value of the U.S. dollar to foreign currencies, competition; metals pricing, demand and availability; transportation and energy costs; pricing and availability of raw materials used in the production of metals; global supply, the level of metals imported into the United States, tariffs, and inventory held in the supply chain; the availability and increased costs of labor; customers’ ability to manage their credit line availability; and layoffs or work stoppages by our own, our suppliers’ or our customers’ personnel. The metals industry also continues to be affected by the global consolidation of our suppliers, competitors and end-use customers.

Like other metals service centers, we maintain substantial inventories of metals to accommodate the short lead times and just-in-time delivery requirements of our customers. Accordingly, we purchase metals in an effort to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers based upon customer forecasts, historic buying practices, supply agreements with customers and market conditions. Our commitments to purchase metals are generally at prevailing market prices in effect at the time we place our orders. From time to time, we have entered into nickel swaps at the request of our customers in order to mitigate our customers’ risk of volatility in the price of metals. We have no long-term, fixed-price metals purchase contracts. When metals prices decline, customer demands for lower prices and our competitors’ responses to those demands could result in lower sale prices and, consequently, lower gross profits and earnings as we use existing metals inventory. When metals prices increase, competitive conditions will influence how much of the price increase we can pass on to our customers. To the extent we are unable to pass on future price increases in our raw materials to our customers, the net sales and gross profits of our business could be adversely affected.

At June 30, 2022, we employed approximately 1,644 people. Approximately 170 of the hourly plant personnel at the facilities listed below are represented by seven separate collective bargaining units. The table below shows the expiration dates of the collective bargaining agreements.

We have never experienced a work stoppage and we believe that our relationship with employees is good. However, any prolonged work stoppages by our personnel represented by collective bargaining units could have a material adverse impact on our business, financial condition, results of operations and cash flows.

Reportable Segments

We operate in three reportable segments; specialty metals flat products, carbon flat products, and tubular and pipe products. The specialty metals flat products segment and the carbon flat products segment are at times consolidated and referred to as the flat products segment. Some of the flat products segments’ assets and resources are shared by the specialty metals and carbon segments and both segments’ products are stored in the shared facilities and, in some locations, processed on shared equipment. As such, total assets and capital expenditures are reported in the aggregate for the flat products segments. Due to the shared assets and resources, certain of the flat products segment expenses are allocated between the specialty metals flat products segment and the carbon flat products segment based upon an established allocation methodology.

We follow the accounting guidance that requires the utilization of a “management approach” to define and report the financial results of operating segments. The management approach defines operating segments along the lines used by the chief operating decision maker, or CODM, to assess performance and make operating and resource allocation decisions. Our CODM evaluates performance and allocates resources based primarily on operating income. Our operating segments are based primarily on internal management reporting.

Due to the nature of the products sold in each segment, there are significant differences in the segments’ average selling price and the cost of materials sold. Due to the nature of the tubular and pipe products, we do not report tons sold or per ton information. Gross profit per ton is generally higher in the specialty metals flat products segment than the carbon flat products segment. Gross profit as a percentage of net sales is generally highest in the tubular and pipe products segment, followed by the carbon and specialty metals flat products segments. Due to the differences in average selling prices, gross profit and gross profit percentage among the segments, a change in the mix of sales could impact total net sales, gross profit and gross profit percentage. In addition, certain inventory in the tubular and pipe products segment is valued under the LIFO method. Adjustments to the LIFO inventory value are recorded to cost of materials sold and may impact the gross margin and gross margin percentage at the consolidated Company and tubular and pipe products segment levels.

Specialty metals flat products

The primary focus of our specialty metals flat products segment is on the direct sale and distribution of processed stainless and aluminum flat-rolled sheet and coil products, flat bar products and fabricated parts. Through the acquisition of Shaw on October 1, 2021, and Action Stainless on December 14, 2020, our specialty metals flat products segment expanded its geographic footprint and enhanced its product offerings in stainless steel and aluminum plate, sheet, angles, rounds, flat bar, tubing and pipe. Through the acquisition of Berlin Metals, LLC, or Berlin Metals, on April 2, 2018, our specialty metals flat products segment expanded its product offerings to include differing types of stainless flat-rolled sheet and coil and prime tin mill products. We act as an intermediary between metals producers and manufacturers that require processed metals for their operations. We serve customers in various industries, including manufacturers of food service and commercial appliances, agriculture equipment, transportation and automotive equipment. We distribute these products primarily through a direct sales force.

Carbon flat products

The primary focus of our carbon flat products segment is on the direct sale and distribution of large volumes of processed carbon and coated flat-rolled sheet, coil and plate products and fabricated parts. We act as an intermediary between metals producers and manufacturers that require processed metals for their operations. We serve customers in most metals consuming industries, including manufacturers and fabricators of transportation and material handling equipment, construction and farm machinery, storage tanks, environmental and energy generation equipment, automobiles, military vehicles and equipment, as well as general and plate fabricators and metals service centers. We distribute these products primarily through a direct sales force.

Combined, the carbon and specialty metals flat products segments have 34 strategically located processing and distribution facilities in the United States and one in Monterrey, Mexico. Many of our facilities service both the carbon and the specialty metals flat products segments, and certain assets and resources are shared by the segments. Our geographic footprint allows us to focus on regional customers and larger national and multi-national accounts, primarily located throughout the midwestern, eastern and southern United States.

Tubular and pipe products

The tubular and pipe products segment consists of the Chicago Tube and Iron, or CTI business, acquired in 2011. Through our tubular and pipe products segment, we distribute metal tubing, pipe, bar, valve and fittings and fabricate pressure parts supplied to various industrial markets. Founded in 1914, CTI operates from seven locations in the Midwestern and southeastern United States. The tubular and pipe products segment distributes its products primarily through a direct sales force.

Corporate expenses

Corporate expenses are reported as a separate line item for segment reporting purposes. Corporate expenses include the unallocated expenses related to managing the entire Company (i.e., all three segments), including compensation for certain personnel, expenses related to being a publicly traded entity such as board of directors’ expenses, audit expenses and various other professional fees.

Results of Operations

Our results of operations are impacted by the market price of metals. Metals prices fluctuate significantly and changes to our net sales, cost of materials sold, gross profit, cost of inventory and profitability, are all impacted by industry metals pricing. Index pricing on carbon steel decreased during the second quarter of 2022 by $347 per ton, or 25.2%, and decreased during the first six months of 2022 by $504 per ton, or 32.8%. Despite the decrease in index pricing during 2022, our average selling prices and average cost of materials sold were higher during the second quarter and first six months of 2022 than during the same periods of 2021. Metals prices in our specialty metals products segment increased during 2022 compared to 2021 due to the unprecedented increase in metal surcharges experienced during the second quarter of 2022. Stainless surcharges increased during the second quarter of 2022 by 32.2% and increased during the first six month of 2022 by 48.9%. Metals pricing for the tubular and pipe products segment have a tendency to lag behind the carbon flat products segment by several months.

Transactional or “spot” selling prices generally move in tandem with market price changes, while fixed selling prices typically lag and reset quarterly. Similarly, inventory costs (and, therefore, cost of materials sold) tend to move slower than market selling price changes due to mill lead times and inventory turnover impacting the rate of change in average cost. When average selling prices increase, and net sales increase, gross profit and operating expenses as a percentage of net sales will generally decrease.

Consolidated Operations

The following table presents consolidated operating results for the periods indicated (dollars are shown in thousands):