Optex Systems Holdings Inc - Annual Report: 2014 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

x ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended September 28, 2014

¨ TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ___ until ___

Commission File Number 000-54114

OPTEX SYSTEMS HOLDINGS, INC.

(Exact name of registrant as specified in its charter)

Securities Registered under Section 12(b) of the Act

None

Securities Registered under Section 12(g) of the Act

Common Stock, par value $.001 per share

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨  No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨  No x

Indicate by check mark whether the issuer (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x

The aggregate market value of the 170,913,943 shares of voting stock held by non-affiliates of the registrant based on the closing price on the OTC Markets on March 30, 2014 was $5,127,418.

Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.

DOCUMENTS INCORPORATED BY REFERENCE

None.

TABLE OF CONTENTS

Cautionary Note Regarding Forward-Looking Information

This Report on Form 10-K, in particular Part II Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” contains certain “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). These forward-looking statements represent our expectations, beliefs, intentions or strategies concerning future events, including, but not limited to, any statements regarding our assumptions about financial performance; the continuation of historical trends; the sufficiency of our cash balances for future liquidity and capital resource needs; the expected impact of changes in accounting policies on our results of operations, financial condition or cash flows; anticipated problems and our plans for future operations; and the economy in general or the future of the defense industry, all of which were subject to various risks and uncertainties.

When used in this Report on Form 10- K and other reports, statements, and information we have filed with the Securities and Exchange Commission (“Commission” or “SEC”), in our press releases, presentations to securities analysts or investors, in oral statements made by or with the approval of an executive officer, the words or phrases “believes,” “may,” “will,” “expects,” “should,” “continue,” “anticipates,” “intends,” “will likely result,” “estimates,” “projects” or similar expressions and variations thereof are intended to identify such forward-looking statements. However, any statements contained in this Report on Form 10-K that are not statements of historical fact may be deemed to be forward-looking statements. We caution that these statements by their nature involve risks and uncertainties, certain of which are beyond our control, and actual results may differ materially depending on a variety of important factors.

We do not assume the obligation to update any forward-looking statement. You should carefully evaluate such statements in light of factors described in this prospectus. In this Form 10-K, Optex Systems Holdings, Inc. (“Optex Systems Holdings”) has identified important factors that could cause actual results to differ from expected or historic results. You should understand that it is not possible to predict or identify all such factors. Consequently, you should not consider any such list to be a complete list of all potential risks or uncertainties.

PART I

Item 1  Description of Business

Background

Prior History - Sustut Exploration, Inc.

Sustut was a Delaware corporation formed on April 11, 2006 to search for available mining properties in North Central British Columbia. It entered into an option agreement in 2006 to purchase a mineral claim, and the option expired in May 2008 without any payment being made. Thus, as of May 2008, Sustut was left with no operating business of which to dispose.

As a result of the reorganization on March 30, 2009, Optex Systems Holdings changed its name from Sustut Exploration Inc. to Optex Systems Holdings, Inc., and its year end from December 31 to a fiscal year ending on the Sunday nearest September 30.

Reorganization

On March 30, 2009, a reorganization occurred whereby the then existing shareholders of Optex Systems, Inc., a private Delaware corporation (“Optex Systems, Inc. (Delaware)”), exchanged their shares of Optex Systems, Inc. (Delaware) common stock with the shares of common stock of Optex Systems Holdings as follows: (i) the outstanding 85,000,000 shares of Optex Systems, Inc. (Delaware) common stock were exchanged for 113,333,282 shares of Optex Systems Holdings common stock, (ii) the outstanding 1,027 shares of Optex Systems, Inc. (Delaware) Series A preferred stock were exchanged for 1,027 shares of Optex Systems Holdings Series A preferred stock and (iii) the 8,131,667 shares of Optex Systems, Inc. (Delaware) common stock purchased in the private placement were exchanged for 8,131,667 shares of Optex Systems Holdings common stock. Optex Systems, Inc. (Delaware) has remained a wholly-owned subsidiary of Optex Systems Holdings, and the Optex Systems, Inc. (Delaware) shareholders are now shareholders of Optex Systems Holdings. As a result of the reorganization, Sileas Corporation, a former shareholder of Optex Systems, Inc. (Delaware), beneficially owns approximately 84.0% of the issued and outstanding common stock of Optex Systems Holdings and Alpha Capital Anstalt, a former shareholder of Optex Systems, Inc. (Delaware) owns 7.0% of the issued and outstanding common stock of Optex Systems Holdings. Furthermore, at the time of the reorganization, Andrey Oks resigned as the sole officer and director of Optex Systems Holdings.

Optex Systems, Inc. (Delaware) manufactures optical sighting systems and assemblies, primarily for Department of Defense applications. Its products are installed on various types of U.S. military land vehicles, such as the Abrams and Bradley fighting vehicles, light armored and armored security vehicles and have been selected for installation on the Stryker family of vehicles. Optex Systems, Inc. (Delaware) also manufactures and delivers numerous periscope configurations, rifle and surveillance sights and night vision optical assemblies. Optex Systems, Inc. (Delaware) products consist primarily of build-to-customer print products that are delivered both directly to the armed services and to other defense prime contractors. Less than 1% of today’s revenue is related to the resale of products substantially manufactured by others. In this case, the product would likely be a simple replacement part of a larger system previously produced by Optex Systems, Inc. (Delaware).

Recent Events

Purchase of Applied Optics Products Line

On November 3, 2014, Optex Systems, Inc. entered into a Purchase Agreement with L-3 Communications, Inc. (“L-3”) pursuant to which Optex purchased from L-3 the assets comprising L-3’s Applied Optics Products Line (“Purchased Assets”), which is engaged in the production and marketing and sales of precision optical assemblies utilizing thin film coating capabilities for optical systems and components primarily used for military purposes. The Purchased Assets consist of personal property, inventory, books and records, contracts, prepaid expenses and deposits, intellectual property, and governmental contracts and licenses utilized in the business comprised of the Purchased Assets.

The purchase price for the acquisition was $1,013,053, which was paid in full at closing, plus the assumption of certain liabilities associated with the Purchased Assets in the approximate amount of $271,000. The source of funds for the acquisition consisted of an advance of $800,000 from accredited investors in a to be consummated private placement of convertible notes to be issued by Optex Systems Holdings in a transaction exempt from registration under Section 4(2) of the Securities Act, with the balance of the funds derived directly from its working capital.

In conjunction with the acquisition of the Purchased Assets, Optex Systems assumed the obligations of L-3 pursuant to this certain Assignment to Lease and Consent of Landlord Agreement (the “Agreement”) dated as of October 30, 2014, between L-3, as tenant, Optex Systems, as assignee, and CABOT II TX1W04, LP, as landlord, with respect to those certain Leases dated as of August 27, 1996 covering Premises located at 9839 and 9827 Chartwell Drive, respectively, Dallas, Texas (the “Premises”), as amended by First Amendments dated May 14, 2001, Second Amendments dated January 9, 2004, Third Amendments dated February 21, 2005 and the Fourth Amendment dated March 13, 2009 (such Leases as so amended being referred to as the “Lease”). The leased premises under the Lease consist of approximately 56,633 square feet of space at the premises, with a monthly rental of approximately $32,000 per month. The term of the lease expires September 30, 2016, and there are four renewal options available to the tenant, and each renewal term is five years in duration.

Issuance of Convertible Notes

On November 17, 2014, Optex Systems Holdings entered into a Subscription Agreement (the “Agreement”) to sell up to $2.1 million principal amount of convertible promissory notes (“Notes”) with several accredited investors (the “Investors”) in a private placement pursuant to which the Investors purchased a series of Notes with an aggregate principal amount of $1.55 million. The Agreement allows for a second closing, to occur no later than 30 days from November 17, 2014, for the balance of the $2.1 million aggregate amount of the offering.  The Notes bear interest at a rate of 12% per annum and mature two years after the date of the issuance.   Optex Systems Holdings may pay interest due either in cash or, at its option, through stock.  The Notes are convertible at the option of the Investors at any time into shares of Optex Systems Holdings’ common stock, par value $0.001 per share (the “Common Stock”) at a conversion price equal to $.0025 per share.  All or part of the then remaining principal amount of the Notes may be prepaid at any time at a price equal to 125% of the sum of the remaining principal amount of the Notes to be prepaid plus all accrued and unpaid interest thereon.  The Agreement also requires the Optex Systems Holdings to affect a 1:350 reverse split of its common stock no later than 90 days from November 17, 2014.

The Notes contain certain customary negative covenants and events of default, including, but not limited to, Optex Systems Holdings’ failure to pay principal and interest, material defaults under the other transaction documents, bankruptcy, and Optex Systems Holdings’ failure to deliver Common Stock certificates after a conversion date.  

The conversion price of the Notes is subject to “full ratchet” anti-dilution adjustment for subsequent lower price issuances by Optex Systems Holdings, as well as customary adjustments provisions for stock splits, stock dividends, recapitalizations and the like.

Pursuant to a Registration Rights Agreement, of even date, between the Company and the Investors, Optex Systems Holdings is obligated to file a registration statement with the Securities and Exchange Commission (“SEC”) registering the shares underlying the Notes for public resale by January 17, 2015 and cause such registration statement to be effective by March 17, 2015.  The Company is subject to certain liquidated damages in the event it does not satisfy such obligations and other obligations under such Registration Rights Agreement.

Sileas Corp., the controlling shareholder of Optex Systems Holdings, also entered into a Make Whole Agreement, of even date, with the Investors and the Company, pursuant to which, unless and until Optex Systems Holdings’ common stock is listed on the NASDAQ Capital Market, it will make payment to the Investors of interest on the Notes, on any date on which interest is due and payable under the Notes, from the date of payment until the maturity date of the Notes.

The securities sold to the Investors were not registered under the Securities Act of 1933, as amended (the “Securities Act”), or the securities laws of any state, and were offered and sold in reliance on the exemption from registration afforded by Section 4(a)(2) under the Securities Act and/or Regulation D promulgated thereunder and corresponding

provisions of state securities laws, which exempt transactions by an issuer not involving any public offering. The Investors are “accredited investors” as such term is defined in Regulation D promulgated under the Securities Act.  

Appointment of Chief Financial Officer, Resignation and Appointment of Chairman and Director

Effective November 19, 2014, Karen Hawkins, the Vice President of Finance and Controller of Optex Systems Holdings, was appointed as its Chief Financial Officer.  

Also effective November 19, 2014, Merrick Okamoto resigned as its Chairman of the Board and as a Director. In recognition of his service, all of his unvested stock options were deemed to vest immediately, and the termination date of all of his stock options was extended to December 31, 2018.  

Also effective November 19, 2014, Peter Benz was appointed as a Director of Optex Systems Holdings by its Board of Directors and was also elected as the Optex Systems Holdings’ Chairman of the Board of Directors.  

Since 2001, Mr. Benz has served as Chairman and Chief Executive Officer of Viking Asset Management, LLC and is a member of the Investment Committee. His responsibilities include assuring a steady flow of candidate deals, making asset allocation and risk management decisions and overseeing all business and investment operations. He has more than 25 years of experience specializing in investment banking and corporate advisory services for small growth companies in the areas of financing, merger/acquisition, funding strategy and general corporate development. Prior to founding Viking in 2001, Mr. Benz founded Bi Coastal Consulting Company where he advised hundreds of companies regarding private placements, initial public offerings, secondary public offerings and acquisitions. Mr. Benz currently serves as a director for usell.com, Inc , Starboard Resources, and Embark Holdings. Prior to founding Bi Coastal Consulting, Mr. Benz was responsible for private placements and investment banking activities at Gilford Securities in New York, NY. Mr. Benz is a graduate of Notre Dame University.

Products

Optex Systems Holdings’ products are installed on various types of U.S. military land vehicles, such as the Abrams and Bradley, and Stryker families of fighting vehicles, as well as light armored and armored security vehicles. Optex Systems Holdings also manufactures and delivers numerous periscope configurations, rifle and surveillance sights and night vision optical assemblies. Optex Systems Holdings delivers its products both directly to the federal government and to prime contractors.

Optex Systems Holdings delivers high volume products, under multi-year contracts, to large defense contractors and government customers. Increased emphasis in the past twelve months has been on new opportunities to promote and deliver Optex products in foreign military sales, where U.S.-manufactured, combat and wheeled vehicles, are supplied (and upgraded) in cooperation with the U.S. Department of Defense. We have a reputation for quality and credibility with our customers as a strategic supplier. We also anticipate the opportunity to integrate some of our night vision and optical sights products into commercial applications.

Specific product categories include:

Location and Facility

We are located in Richardson, TX in an approximately 49,000 square foot facility, and as of December 19, 2014, we had 53 full time equivalent employees. We operate with a single shift, and capacity could be expanded by adding a second shift. Our proprietary processes and methodologies provide barriers to entry for other competing suppliers. In many cases, we are the sole source provider or one of only two providers of a product. We have capabilities which include machining, bonding, painting, tracking, engraving and assembly and can perform both optical and environmental testing in-house.

We lease our facility. Effective as of December 10, 2013, and executed on December 10, 2013, Optex Systems Holdings, Inc. renewed its Richardson, TX lease. Under the terms of the amendment:

In November 2014, we also acquired a new business unit from L-3 Communications, Inc., which is described herein below under “Recent Events — Acquisition”. The acquisition, Applied Optics Center (AOC), is located in Dallas, Texas with leased premises consisting of approximately 56,633 square feet of space, As of December, 19, 2014, Applied Optics Center operates with 27 full time equivalent employees in a single shift operation.

Contracts

Each contract with Optex Systems Holdings’ customers has specific quantities of material that need to be purchased, assembled, and then shipped. Prior to bidding a contract, Optex Systems Holdings contacts potential sources of material and receives qualified quotations for this material. In some cases, the entire volume is given to a single supplier and in other cases, the volume might be split between several suppliers. If a contract has a single source supplier and that supplier fails to meet their obligations (e.g., quality, delivery), then Optex Systems Holdings would attempt to find an acceptable alternate supplier, and if successful, it would then renegotiate contractual deliverables (e.g., specifications, delivery, price). As of December 12, 2014, approximately 75% of the costs of our material requirements are single-sourced across four suppliers representing approximately 11% of our active supplier orders.  The percentage of single sourced materials increased significantly over prior periods due to lower overall purchase order commitments, combined with a change in product mix with a higher percentage of purchase orders in support of the DDAN program and a lower percentage in support of periscopes. Single-sourced component requirements span across all of our major product lines. Of these single sourced components, we have material contracts (purchase orders) with firm pricing and delivery schedules in place with each of the suppliers to supply the parts necessary to satisfy our current contractual needs.

We are subject to, and must comply with, various governmental regulations that impact, among other things, our revenue, operating costs, profit margins and the internal organization and operation of our business. The material regulations affecting our U.S. government business are summarized in the table below.

Optex Systems Holdings is responsible for full compliance with the Federal Acquisition Regulation. Upon award, the contract may identify certain regulations that Optex Systems Holdings needs to meet. For example, a contract may allow progress billing pursuant to specific Federal Acquisition Regulation clauses incorporated into the contract. Other contracts may call for specific first article acceptance and testing requirements. The Federal Acquisition Regulation will identify the specific regulations that Optex Systems Holdings must follow based on the type of contract awarded. The Federal Acquisition Regulation also contains guidelines and regulations for managing a contract after award, including conditions under which contracts may be terminated, in whole or in part, at the government’s convenience or for default. These regulations also subject us to financial audits and other reviews by the government of our costs, performance, accounting and general business practices relating to our government contracts, which may result in adjustment of our contract-related costs and fees and, among other things and impose accounting rules that define allowable and unallowable costs governing our right to reimbursement under certain contracts.

First Article Testing and Acceptance requirements consist of specific steps. For example, the first article testing associated with Howitzer-type product is comprehensive and time consuming. The dimensions and material specifications of each piece of the assembly must be verified, and each product has in excess of 100 piece parts. Once the individual piece parts are verified to be compliant to the specification, the assembly processes are documented and verified. A sample of the production (typically three units) is verified to meet final performance specifications. Once the units meet the final performance specification, they are then subjected to accelerated life testing, a series of tests which simulate the lifetime use of the product in the field. This consists of exposing the units to thermal extremes, humidity, mechanical shock, vibration, and other physical exposure tests. Once completed, the units undergo a final verification process to ensure that no damage has occurred as a result of the testing and that they continue to meet the performance specification. All of the information and data is recorded into a final first article inspection and test report and submitted to the customer along with the test units for final approval. First Article Acceptance and Testing is generally required on new contracts/product awards but may also be required on

existing products or contracts where there has been a significant gap in production, or where the product has undergone significant manufacturing process, material, tooling, equipment or product configuration changes.

Optex Systems Holdings, Inc. is also subject to laws, regulations and executive orders restricting the use and dissemination of information deemed classified for national security purposes and the exportation of certain products and technical data as covered by the International Traffic in Arms Regulation. In order to import or export items listed on the U.S. Munitions List, we are required to be registered with the Directorate of Defense Trade Controls office. The registration is valid for one year, and the registration fees are established based on the number of license applications submitted the previous year. Optex Systems Holdings currently has an approved and current registration on file with the Directorate of Defense Trade Controls office. Once the registration is approved, each import/export license must be filed separately. License approval requires the company to provide proof of need, such as a valid contract or purchase order requirement for the specific product or technical data requested on the license and requires a detailed listing of the items requested for export/import, the end-user, the end-user statement, the value of the items, consignees/freight forwarders and a copy of a valid contract or purchase order from the end-user. The approval process for the license can vary from several weeks to six months or more. The licenses Optex Systems Holdings currently uses are the DSP-5 (permanent export), DSP-6 (license revisions) and DSP-73 (temporary export).

The aforementioned licenses are valid for 48 months from date that each such license is issued as set forth on the table below (updated as of December 13, 2014).

Licenses are subject to termination if a licensee is found to be in violation of the Arms Export Control Act or the International Traffic in Arms Regulations requirements. If a licensee is found to be in violation, in addition to a termination of its licenses, it can be subject to fines and penalties by the government.

Optex Systems Holdings’ contracts may also be governed by the Truth in Negotiation Act requirements where certain of our contracts or proposals exceed the $700,000 threshold and/or are deemed as sole source, or non- competitive awards, covered under this act. For these contracts, Optex Systems Holdings must provide a vast array of cost and pricing data in addition to certification that our pricing data and disclosure materials are current, accurate and complete upon conclusion of the negotiation. Due to the additional disclosure and certification requirements, if a post contract award audit were to uncover that the pricing data provided was in any way not current, accurate or complete as of the certification date, Optex Systems Holdings could be subjected to a defective pricing claim adjustment with accrued interest. Currently, Optex Systems Holdings does not have any pending defective pricing claim adjustments. Additionally, as a result of this requirement, contract price negotiations may span from two to six months and can result in undefinitized or not to exceed ceiling priced contracts subject to future downward negotiations and price adjustments. Currently, Optex Systems Holdings does not have any undefinitized contracts subject to further price negotiation.

Our failure to comply with applicable regulations, rules and approvals or misconduct by any of our employees could result in the imposition of fines and penalties, the loss of security clearances, the loss of our U.S. government contracts or our suspension or debarment from contracting with the U.S. government generally, any of which could have a material adverse effect our business, financial condition, results of operations and cash flows. We are currently in compliance with all applicable regulations and do not have any pending claims as a result of noncompliance.

The terms of our material contracts are as follows (updated as of December 12, 2014):

Organizational History

On October 14, 2008, in a transaction that was consummated via public auction, Optex Systems, Inc. (Delaware) purchased all of the assets of Optex Systems, Inc. (Texas) in exchange for $15 million of Irvine Sensors Corporation debt and the assumption of approximately $3.8 million of certain liabilities of Optex Systems, Inc. (Texas). Optex Systems, Inc. (Delaware) was formed by the Longview Fund, LP and Alpha Capital Antstalt, former secured creditors of Irvine Sensors Corporation, to consummate the transaction with Optex Systems Holdings, and subsequently, on February 20, 2009, Longview Fund conveyed its ownership interest in Optex Systems Holdings to Sileas Corporation, an entity owned by three of Optex Systems Holdings’ officers (one of whom is also one of Optex Systems Holdings’ three directors). On March 30, 2009, a reorganization occurred whereby Optex Systems, Inc. (Delaware) became a wholly-owned subsidiary of Optex Systems Holdings.

Market Opportunity — U.S. Military

The impact of the U.S. congressionally mandated defense spending reductions is reflected in the lower annual sales of Optex Systems Holdings and based on the most recent U.S. Budget projections, the projected spending will approximate or decline slightly from the current reduced spending levels through fiscal year 2019. The chart below was derived from public government spending sources and depicts total U.S. military spending from 2004 through 2013 and forecasted spending through 2019. It is difficult to directly tie this spending to any specific military vehicles; however, Optex Systems Holdings serves the U.S. armed forces, active duty and reserves, plus various state national guards. The purpose of including this chart is to provide the reader with actual trend data showing U.S. military defense and procurement spending from 2004 through 2013. The total military spending increased from $436.4 billion in 2004 and peaked at $678.1 billion in 2011 representing a total increase in military spending of 55.4% during that period. As of fiscal year 2014 the total projected military spending has declined by 12.5% from the peak 2011 level. However, the military procurement budget depicts a more significant decline of 31.2% to $91.2 billion from its peak level of $133.6 billion in 2010. The U.S. government spending reductions have had a significant impact on our product lines as our products directly support various types of U.S. military land vehicle procurements. As a direct result of lower U.S. defense procurement spending, Optex Systems Holdings has experienced reduced revenues of 37.1% from fiscal years 2011 through fiscal year 2014. Given the reductions in U.S. military spending in recent years and the budget uncertainty in the coming years, Optex Systems Holdings continues to aggressively pursue international and commercial opportunities in addition to maintaining its current footprint with U.S. vehicle manufactures, with existing as well as new product lines.

Source: Government Printing Office, U.S. Budget Historical Tables, FY 2014, Table 3.2 Outlays by function and subfunction, 1962-2019

The following factors are important to the U.S. military:

Optex Systems Holdings focuses on delivering products that satisfy these factors and believes it is well positioned to continue to service U.S. and foreign military needs.

Market Opportunity — Foreign Military

Despite the downturn in U.S. military spending, Foreign Military Sales funding for products built in the United States for selected foreign militaries, has held to peak funding levels. Thus, Optex Systems Holdings has increased efforts to promote its proven military products, as well as newly improved product solutions directly to foreign military representatives. In April 2014, Optex Systems Holdings completed the first shipments of M17 Day / Thermal Periscope (NSN 6650-01-619-6545) to a country in South America. This direct transaction allows Optex Systems Holdings to directly serve South America customers and affect influence into their future procurements. Additionally, shipment of the new M17 Day / Thermal Periscope validates Optex Systems Holdings’ efforts to upgrade existing platforms with new technology. The M17 Day / Thermal Periscope is a cost effective upgrade to existing systems in that it provides both Day and Thermal views specifically designed for driving armored vehicles. It can be installed in vehicles which were originally designed without this technology may be used as a backup to existing systems. We anticipate our efforts in South America will culminate in new orders for this

technology in the near term. We are now bidding on several substantial government contracts to expand sales and production beyond the current production and backlog. For example, Optex Systems Holdings is supporting General Dynamics Land Systems in their efforts related to the production of the Israeli Namer Armored Personnel Carrier (aka Merkava APC). In this opportunity, General Dynamics Land Systems is contracting for the production of 386 vehicles which contain a “Periscope Kit” which could be supplied by Optex Systems Holdings. This kit would contain seven periscopes and sixteen additional supporting part numbers. Optex Systems Holdings will continue to pursue international opportunities through direct sales (e.g., General Dynamics Land Systems — Canada) and through existing customers (e.g., General Dynamics Land Systems — Israeli Namer Project).  

We are also exploring possibilities to adapt some of our products for commercial use in those markets that demonstrate potential for solid revenue growth, both domestically and internationally.

Market Opportunity — Commercial

Optex Systems Holdings’ products are currently sold to military and related government markets. We believe there may be opportunities to commercialize various products we presently manufacture to address other markets. Our initial focus will be directed in four product areas.

Customer Base

Optex Systems Holdings serves customers in three primary categories: as prime contractor (TACOM Life Cycle Command, DLA (Defense Logistics Agency) Warren, U.S. Army, Navy and Marine Corps), as subcontractor (General Dynamics, BAE, and NorcaTec) and also as a supplier to foreign governments (Israel, Australia and NAMSA). Although we do serve all three of these categories, for the twelve months ended September 28, 2014, we derived approximately 89% of our gross business revenue from three customers: 47% from General Dynamics Land Systems Divisions, 30% from the U.S. Government (primarily DLA), and 12% from BAE Systems (with which we have approximately 75 discrete contracts for items that are utilized in vehicles, product lines and spare parts). Given the size of General Dynamics Land System Division, DLA and BAE as well as the fact that there are multiple contracts with each entity, which are not interdependent, we are of the opinion that this provides us with a fairly well diversified revenue pool.

Marketing Plan 

Potential Entrants — Low Risk to Optex Systems Holdings. In order to enter this market, potential competitors must overcome several barriers to entry. The first hurdle is that an entrant would need to prove to the government agency in question the existence of a government approved accounting system for larger contracts. Second, the entrant would need to develop the processes required to produce the product. Third, the entrant would then need to produce the product and then submit successful test requirements (many of which require lengthy government consultation for completion). Finally, in many cases, the customer has an immediate need and therefore cannot wait for this qualification cycle and therefore must issue the contracts to existing suppliers.

Historically, Optex Systems Holdings competed with two other companies in different spaces. First, Optex Systems Holdings previously competed with Miller-Holzwarth in the plastic periscope business. In July 2012, Miller-Holzwarth, Inc. ceased operations apparently as a result of an inability to meet its financial obligations combined with a decline in defense market conditions. Second, Optex Systems Holdings currently competes with Seiler Instruments for fire control products. These contracts are higher value products, but lower quantities. Given the expense of development and qualification testing, the barrier to entry is high for new competitors. During the last four years, overall plastic periscope demand quantities have declined, while competition on the lower level periscope products has significantly increased as new contractors aggressively compete for market share amongst the existing customer base and quantities.

Buyers — Medium Risk to Optex Systems Holdings. In most cases the buyers (usually government agencies or defense contractors) have two fairly strong suppliers. It is in their best interest to keep at least two, and therefore, in some cases, the contracts are split between suppliers. In the case of larger contracts, the customer can request an open book policy on costs and expects a reasonable margin to have been applied.

Substitutes — Low Risk to Optex Systems Holdings. Optex Systems Holdings has both new vehicle contracts and replacement part contracts for the exact same product. The U.S. government has declared that the Abrams/Bradley base vehicles will be the ground vehicle of choice through 2040. The Bradley vehicle has been in service for 28 years, the Abrams for 27 years. In February 2008, the U.S. Army signed a multiyear third party contract for the

delivery of improved Abrams and Bradleys. The contract is for up to 435 tanks and 540 Bradley vehicles. These are the only production tanks currently in production by the government. This, in conjunction with the 30 year life span, supports their continued use through 2040. The Abrams is the principal battle tank of the United States Army and Marine Corps, and the armies of Egypt, Kuwait, Saudi Arabia, and since 2007, Australia. The new contract terms allow efficiencies within the supply chain and a very long return on investment on new vehicle proposals. There is a new Ground Combat Vehicle in development that will ultimately supplement or replace the Bradley vehicles. The U.S. Army is waiting to receive prototype vehicles from different bidders to begin testing. The U.S. Army intends to replace about 40 percent of the Bradleys in its heavy combat brigades with new Ground Combat Vehicles and has an initial acquisition goal of 1,874 vehicles with the production of the vehicle anticipated to start in 2018.

Suppliers — Low to Medium Risk to Optex Systems Holdings. The suppliers of standard processes (e.g., casting, machining and plating) need to be very competitive to gain and /or maintain contracts. Those suppliers of products that use top secret clearance processes are slightly better off; however, there continues to be multiple avenues of supply and therefore only moderate power.

Consistent with Optex Systems Holdings marketing plan and business model, the AOC acquisition strengthened the Company’s overall position by decreasing the bargaining power of their suppliers through the backwards integration of a key supplier and created additional barriers of entry of potential competitors.  Overall, the customer base and the competition have seen the acquisition as creating a stronger Optex Systems Holdings.

The second model is a two by two matrix for products and customers.

This product/customer matrix sets forth our four basic approaches:

The product categories described in the above matrix are associated with the product lines set forth below:

Operations Plan

Our operations plan can be broken down into three distinct areas: material management, manufacturing space planning and efficiencies associated with economies of scale.

Materials Management—

The largest portion of our costs is materials. We have completed the following activities in order to demonstrate continuous improvement:

Future continuous improvement opportunities include installation and training of shop floor control module within the ERP system and organizational efficiencies of common procurement techniques among buyers.

Manufacturing Space Planning

We currently lease approximately 49,000 square feet of manufacturing space (see “Location and Facility”), and we have leased additional space in conjunction with our recent acquisition as described under “Recent Events”. Our current facility is sufficient to meet our immediate production needs without excess capacity. As our processes are primarily labor driven, we are able to easily adapt to changes in customer demand by adjusting headcounts, overtime schedules and shifts in line with production needs. In the event additional floor space is required to accommodate new contracts, Optex has the option to lease adjacent floor space at the current negotiated lease cost per square foot. As part of our lease agreement renewed December 10, 2013, effective December 10, 2013, Optex Systems Holdings was able to negotiate additional HVAC leasehold improvements of $0.35 million paid by the landlord. These funds are primarily earmarked for replacement and improvements of old outdated HVAC systems throughout the facility.

Consistent with the space planning, we will drive economies of scale to reduce support costs on a percentage of sales basis. These cost reductions can then be either passed through directly to the bottom line or used for business investment.

Our manufacturing process is driven by the use of six sigma techniques and process standardization. Initial activities in this area have been the successful six sigma projects in several production areas which have led to improved output and customer approval on the aesthetics of the work environment. In addition, we use many tools including 5S programs, six sigma processes, and define, measure, analyze, improve, control (DMAIC) problem solving techniques to identify bottlenecks within the process flow, reduce cost and improve product yields. Successful results can then be replicated across the production floor and drive operational improvements.

Economies of Scale

Plant efficiencies at Optex Systems Holdings fluctuate as a function of program longevity, complexity and overall production volume. Our internal processes are primarily direct labor intensive and can be more easily adapted to meet fluctuations in customer demand; however, our material purchases, subcontracted operations and manufacturing support costs are extremely sensitive to changes in volume. As our volume increases, our support labor, material and scrap costs decline as a percentage of revenue as we are able to obtain better material pricing, and scrap, start up and support labor (fixed) costs and they are spread across a higher volume base. On the contrary, as production volumes decline, our labor and material costs per unit of production generally increase. Additional factors that contribute to economies of scale relate to the longevity of the program. Long running, less complex programs (e.g., periscopes) do not experience as significant of an impact on labor costs as production volumes change, as the associated workforce is generally less skilled and can be ramped quickly as headcounts shift. Our more complex Howitzer and thermal day/night programs are more significantly impacted by volume changes as they require a more highly-skilled workforce and ramp time is longer as the training is more complex. Optex Systems Holdings continually monitors customer demand over a rolling twelve month window and in order to anticipate any changes in necessary manpower and material which allows us to capitalize on any benefits associated with increased volume and minimize any negative impact associated with potential declines in product quantities.

Intellectual Property

We utilize several highly specialized and unique processes in the manufacture of our products. While we believe that these trade secrets have value, it is probable that our future success will depend primarily on the innovation, technical expertise, manufacturing and marketing abilities of our personnel. We cannot assure you that we will be able to maintain the confidentiality of our trade secrets or that our non-disclosure agreements will provide meaningful protection of our trade secrets, know-how or other proprietary information in the event of any unauthorized use, misappropriation or other disclosure. The confidentiality agreements that are designed to protect our trade secrets could be breached, and we might not have adequate remedies for the breach. Additionally, our trade secrets and proprietary know-how might otherwise become known or be independently discovered by others. We possess one patent; and have applied for two others in the US and in foreign countries. While we are optimistic that our applications will be approved, we cannot guarantee that these patent applications will ever transpire into an awarded patent.  The claims were based on technology which is believed to be unique; however, there are many companies and many patents already awarded in this space.  Further, the time frame for the US Patent and Trademark Office to review the patent application and engage in negotiations cannot be guaranteed.

Our competitors, many of which have substantially greater resources, may have applied for or obtained, or may in the future apply for and obtain, patents that will prevent, limit or interfere with our ability to make and sell some of our products. Although we believe that our products do not infringe on the patents or other proprietary rights of third parties, we cannot assure you that third parties will not assert infringement claims against us or that such claims will not be successful.

In December 2013 Optex Systems, Inc. (Delaware) was issued U.S. Patent No. 13,357,802 titled "Multiple Spectral Single Image Sighting System Using Single Objective Lens Set." The technology platform, designed for our DDAN program, is applicable to all ground combat vehicles used by the US and foreign militaries. This invention presents a single image to both day and night sensors using precision optics, which in turn allows the user to individually observe day, night, or day and night simultaneously. In addition, it has proven to be especially useful in light

transition points experienced at dusk and dawn. We are in production and currently delivering sighting systems with this advanced technology, a significant upgrade in the goal of supporting our customers as they modernize the worldwide inventory of aging armored vehicles. This technology is applicable to many sighting systems, and it has already been designed for implementation on the Light Armored Vehicles, the Armored Security Vehicle, the Amphibious Assault Vehicle, and the M60 Main Battle Tank.  Digital Day and Night technology has advanced the capabilities of these installed weapon systems and is the first in a series of patents we have applied for to protect our Intellectual Property portfolio in support of the warfighters who use these systems.

In May 2012, Optex Systems purchased a perpetual, non-exclusive license, with a single up front license fee of $200 thousand to use Patent 7,880,792 “Optical and Infrared Periscope with Display Monitor” owned by Synergy International Optronics, LLC. We believe the purchase of the license agreement may allow us to extend and expand our market potential for theM113APC vehicle type which has the highest number of commonly used armored vehicles in the world. The current estimated active M113 APC worldwide inventory is over 80,000 units. This licensing of this patent allows Optex Systems to develop additional products for this vehicle type, including the M17 Day/Thermal and M17 Day/Night periscopes.  We are actively marketing the new periscopes internationally and completed our first international shipment utilizing this technology in March 2014. We continue to prototype these products and demonstrate them to potential customers. 

Competition

The markets for our products are competitive. We compete primarily on the basis of our ability to design and engineer products to meet performance specifications set by our customers. Our customers include military and government end users as well as prime contractors that purchase component parts or subassemblies, which they incorporate into their end products. Product pricing, quality, customer support, experience, reputation and financial stability are also important competitive factors.

There are a limited number of competitors in each of the markets for the various types of products that we design, manufacture and sell. At this time, we consider our primary competitors to be Seiler Instruments, Kent Periscopes and Synergy International Optronics, LLC.

Our competitors are often well entrenched, particularly in the defense markets. Some of these competitors have substantially greater resources than we do. While we believe that the quality of our technologies and product offerings provides us with a competitive advantage over certain manufacturers, some of our competitors have significantly more financial and other resources than we do to spend on the research and development of their technologies and for funding the construction and operation of commercial scale plants.

We expect our competitors to continue to improve the design and performance of their products. We cannot assure investors that our competitors will not develop enhancements to, or future generations of, competitive products that will offer superior price or performance features, or that new technology or processes will not emerge that render our products less competitive or obsolete. Increased competitive pressure could lead to lower prices for our products, thereby adversely affecting our business, financial condition and results of operations. Also, competitive pressures may force us to implement new technologies at a substantial cost, and we may not be able to successfully develop or expend the financial resources necessary to acquire new technology. We cannot assure you that we will be able to compete successfully in the future.

Employees

Optex Systems Holdings had 53 full time equivalent employees as of September 28, 2014. Optex Systems Holdings also uses a small temporary work force to handle peak loads. To the best of its knowledge, Optex Systems Holdings is compliant with local prevailing wage, contractor licensing and insurance regulations, and has good relations with its employees, who are not currently unionized.

Item 1A  Risk Factors

Investing in our common stock involves a high degree of risk. Prospective investors should carefully consider the risks described below, together with all of the other information included or referred to in this annual report, before purchasing shares of our common stock. There are numerous and varied risks, known and unknown, that may prevent us from achieving our goals. The risks described below are not the only risks we will face. If any of these risks actually occurs, our business, financial condition or results of operations may be materially adversely affected. In such case, the trading price of our common stock could decline and investors in our common stock could lose all or part of their investment. The risks and uncertainties described below are not exclusive and are intended to reflect the material risks that are specific to us, material risks related to our industry and material risks related to companies that undertake a public offering or seek to maintain a class of securities that is registered or traded on any exchange or over-the-counter market.

Risks Related to our Business

We expect that we may need to raise additional capital in the future beyond any cash flow from our existing business; additional funds may not be available on terms that are acceptable to us, or at all.

We anticipate we may have to raise additional capital in the future to service our debt and to finance our future working capital needs. We cannot assure you that any additional capital will be available on a timely basis, on acceptable terms, or at all. Future equity or debt financings may be difficult to obtain. If we are not able to obtain additional capital as may be required, our business, financial condition and results of operations could be materially and adversely affected.

We anticipate that our capital requirements will depend on many factors, including:

Even if available, financings may involve significant costs and expenses, such as legal and accounting fees, diversion of management’s time and efforts, and substantial transaction costs. If adequate funds are not available on acceptable terms, or at all, we may be unable to finance our operations, develop or enhance our products, expand our sales and marketing programs, take advantage of future opportunities or respond to competitive pressures.

Current economic conditions may adversely affect our ability to continue operations.

Current economic conditions may continue to cause a decline in business and consumer spending and capital market performance, which could adversely affect our business and financial performance. Our ability to raise funds, upon which we are fully dependent to continue to expand our operations, may be adversely affected by current and future economic conditions, such as a reduction in the availability of credit, financial market volatility and economic recession.

Our ability to fulfill our backlog may have an effect on our long term ability to procure contracts and fulfill current contracts.

Our ability to fulfill our backlog may be limited by our ability to devote sufficient financial and human capital resources and limited by available material supplies. If we do not fulfill our backlog in a timely manner, we may experience delays in product delivery which would postpone receipt of revenue from those delayed deliveries. Additionally, if we are consistently unable to fulfill our backlog, this may be a disincentive to customers to award large contracts to us in the future until they are comfortable that we can effectively manage our backlog.

Our historical operations depend on government contracts and subcontracts. We face risks related to contracting with the federal government, including federal budget issues and fixed price contracts.

Future general political and economic conditions, which cannot be accurately predicted, may directly and indirectly affect the quantity and allocation of expenditures by federal agencies. Even the timing of incremental funding commitments to existing, but partially funded, contracts can be affected by these factors. Therefore, cutbacks or re-allocations in the federal budget could have a material adverse impact on our results of operations. Given the continued adverse economic conditions, the federal government has slowed its pace with regard to the release of orders for the U.S. military. Since we depend on orders for equipment for the U.S. military for a significant portion of our revenues, this slower release of orders will continue to have a material adverse impact on our results of operations. Obtaining government contracts may also involve long purchase and payment cycles, competitive bidding, qualification requirements, delays or changes in funding, budgetary constraints, political agendas, extensive specification development, price negotiations and milestone requirements. In addition, our government contracts are primarily fixed price contracts, which may prevent us from recovering costs incurred in excess of budgeted costs. Fixed price contracts require us to estimate the total project cost based on preliminary projections of the project’s requirements. The financial viability of any given project depends in large part on our ability to estimate such costs accurately and complete the project on a timely basis. Some of those contracts are for products that are new to our business and are thus subject to unanticipated impacts to manufacturing costs. Given the current economic conditions, it is also possible that even if our estimates are reasonable at the time made, that prices of materials are subject to unanticipated adverse fluctuation. In the event our actual costs exceed fixed contractual costs of our product contracts, we will not be able to recover the excess costs which could have a material adverse effect on our business and results of operations. We examine these contracts on a regular basis and accrue for anticipated losses on these contracts, if necessary. As of September 28, 2014, we had a loss provision of $11 thousand accrued as a result of cost overruns on a contract that completed in the first quarter of fiscal year 2015.

Approximately 95% of our contracts contain contract termination clauses for convenience. In the event these clauses should be invoked by our customer, future revenues against these contracts could be affected, however these clauses allow for a full recovery of any incurred contract costs plus a reasonable fee up through and as a result of the contract termination. We are currently unaware of any pending terminations on our existing contracts.

In some cases, contract awards may be issued that are subject to renegotiation at a date (up to 180 days) subsequent to the initial award date. Generally, these subsequent negotiations have had an immaterial impact (zero to 5%) on the contract price of the affected contracts. Currently, none of our awarded contracts are subject to renegotiation.

We have sought to mitigate the adverse impact on our results of operations from U.S. military orders by seeking to obtain foreign military orders. In fiscal year 2012, we won a significant bid in securing an $8.0 million five year contact with a foreign military contractor and in the first quarter of fiscal year 2014, we received a quantity add on for and additional $1.0 million to the original contract; however, we do not expect this contract win and our other

efforts to completely mitigate the negative impact that the slower pace of U.S. military orders has had on our results from operations.

There is further uncertainty which arises from the sequestration in early 2013 which may continue to affect business opportunities at the federal government level.

Military spending has been negatively impacted by the Budget Control Act of 2011 (BCA), which was passed in August 2011. The Budget Act mandated a $917.0 billion reduction in discretionary spending over the next decade, and $1.2 trillion in automatic spending cuts over a nine-year period to be split between defense and non-defense programs beginning in January 2013.

In December, 2013, the Bipartisan Budget Act (BBA) of 2013, scaled back mandated reductions in fiscal 2014 and 2015 (the budget year beginning October 1). Federal spending would thus be larger in these two years, but would be less in subsequent years until 2023.  At BCA/BBA levels, the fourth brigade set of the Striker would not be funded, resulting in a significant decrease in plastic periscopes sold to GD-Canada starting in fiscal year 2016. The BCA cuts would potentially slow or stop the development of the follow-on Amphibious Combat Vehicle (ACV) program to replace the 40-year old legacy Amphibious Assault Vehicles (AAV) scheduled to start in fiscal year 2016.

On December 12, 2014 Congress passed the National Defense Authorization Act (NDAA) for Fiscal Year 2015, which is the comprehensive legislation to authorize the budget authority of the Department of Defense and the national security programs of the Department of Energy. The bill authorizes $584.2 billion in defense funding for FY2015, a decrease of 4% from the FY2014 authorized NDAA funding of $607 billion. Further, many of the funding and program provisions in the measure last only for one year, pushing long-term decisions off to the new Congress that convenes in January 2015. As the effect of the mandated budget reductions are scheduled to resume at an increased level starting in fiscal year 2016, the continued uncertainty surrounding the BBA/BCA reductions have resulted in further reductions, delays or cancellations of these programs, which could have a further material adverse effect on our business, financial condition and results of operations.

If we fail to scale our operations appropriately in response to growth and changes in demand, we may be unable to meet competitive challenges or exploit potential market opportunities, and our business could be materially and adversely affected.

Our past growth has placed, and any future growth in our historical business is expected to continue to place, a significant strain on our management personnel, infrastructure and resources. To implement our current business and product plans, we will need to continue to expand, train, manage and motivate our workforce, and expand our operational and financial systems, as well as our manufacturing and service capabilities. All of these endeavors will require substantial management effort and additional capital. If we are unable to effectively manage our expanding operations, we may be unable to scale our business quickly enough to meet competitive challenges or exploit potential market opportunities, and our current or future business could be materially and adversely affected.

We do not have employment agreements with our key personnel, other than our Chief Executive Officer. If we are not able to retain our key personnel or attract additional key personnel as required, we may not be able to implement our business plan and our results of operations could be materially and adversely affected.

We depend to a large extent on the abilities and continued participation of our executive officers and other key employees. The loss of any key employee could have a material adverse effect on our business. We currently have only one employment agreement, with our Chief Executive Officer which renews on an annual basis and currently expires on December 1, 2015, and we do not presently maintain “key man” insurance on any key employees. We believe that as our activities increase and change in character, additional, experienced personnel will be required to implement our business plan. Competition for such personnel is intense, and we cannot assure you that they will be available when required, or that we will have the ability to attract and retain them. In addition, due to our small size, we do not presently have depth of staffing in our executive, operational and financial management areas in order to have an effective succession plan should the need arise. Thus, in the event of the loss of one or more of our management employees, our results of operations could be vulnerable to challenges associated with recruiting additional key personnel, if such recruiting efforts are not successful in a timely manner.

Certain of our products are dependent on specialized sources of supply that are potentially subject to disruption which could have a material, adverse impact on our business.

Optex Systems Holdings has selectively single-sourced some of our material components in order to mitigate excess procurement costs associated with significant tooling and startup costs. Furthermore, because of the nature of government contracts, we are often required to purchase selected items from U.S. government approved suppliers, which may further limit our ability to utilize multiple supply sources for these key components.

To the extent any of these single sourced or government approved suppliers should have disruptions in deliveries due to production, quality, or other issues, Optex Systems Holdings may also experience related production delays or unfavorable cost increases associated with retooling and qualifying alternate suppliers. The impact of delays resulting from disruptions in supply for these items could negatively impact our revenue, our customer reputation, and our results of operations. In addition, significant price increases from single-source suppliers could have a negative impact on our profitability to the extent that we are unable to recover these cost increases on our fixed price contracts.

Each contract has a specific quantity of material which needs to be purchased, assembled, and finally shipped. Prior to bidding a contract, Optex Systems Holdings contacts potential sources of material and receives qualified quotations for this material. In some cases, the entire volume is given to a single supplier and in other cases; the volume might be split between several suppliers. If a contract has a single source supplier and that supplier fails to meet their obligations (e.g., quality, delivery), then Optex Systems Holdings would find an alternate supplier and bring this information back to the final customer. Contractual deliverables would then be re-negotiated (e.g., specifications, delivery, price). As of December 12, 2014, approximately 75% of the costs of our material requirements are single-sourced across four suppliers representing approximately 11% of our active supplier orders.  The percentage of single sourced materials increased significantly over prior periods due lower overall purchase order commitments, combined with a change in product mix with a higher percentage of purchase orders in support of the Digital Day and Night (DDAN) program and a lower percentage in support of periscopes. Single-sourced component requirements span across all of our major product lines. The vast majority of these single-sourced components could be provided by another supplier with minimal interruption in schedule (supply delay of 3 months or less) or increased costs. We do not believe these single sourced materials to pose any significant risk to Optex Systems Holdings as other suppliers are capable of satisfying the purchase requirements in a reasonable time period with minimal increases in cost. Of these single sourced components, we have contracts (purchase orders) with firm pricing and delivery schedules in place with each of the suppliers to supply parts in satisfaction of our current contractual needs.

We consider only those specialized single source suppliers where a disruption in the supply chain would result in a period of three months or longer for Optex Systems Holdings to identify and qualify a suitable replacement to present a material financial or schedule risk. In the table below, we identify only those specialized single source suppliers and the product lines supported by those materials utilized by us as of December 12, 2014.

The defense technology supply industry is subject to technological change and if we are not able to keep up with our competitors and/or they develop advanced technology as response to our products, we may be at a competitive disadvantage.

The market for our products is generally characterized by technological developments, evolving industry standards, changes in customer requirements, frequent new product introductions and enhancements, short product life cycles and severe price competition. Our competitors could also develop new, more advanced technologies in reaction to our products. Currently accepted industry standards may change. Our success depends substantially on our ability, on a cost-effective and timely basis, to continue to enhance our existing products and to develop and introduce new products that take advantage of technological advances and adhere to evolving industry standards. An unexpected change in one or more of the technologies related to our products, in market demand for products based on a particular technology or of accepted industry standards could materially and adversely affect our business. We may or may not be able to develop new products in a timely and satisfactory manner to address new industry standards and technological changes, or to respond to new product announcements by others. In addition, new products may or may not achieve market acceptance.

As a result of our November 2014 acquisition of the Applied Optics Center Business from L-3 Communications, we believe we have incurred the following additional risks, which may have a material adverse effect on our business results as we integrate the operations.

As a result of the purchase and integration of the AOC business with our traditional business lines, the combined businesses are subject to some accretive risks which were not formerly present.

Unexpected warranty and product liability claims could adversely affect our business and results of operations.

The possibility of future product failures could cause us to incur substantial expense to repair or replace defective products. Some of our customers require that we warrant the quality of our products to meet customer requirements and be free of defects for twelve to fifteen months subsequent to delivery. Approximately 80% of our current (as of September 28, 2014) contract deliveries are covered by these warranty clauses. We establish reserves for warranty claims based on our historical rate of less than one percent of returned shipments against these contracts. There can be no assurance that this reserve will be sufficient if we were to experience an unexpectedly high incidence of problems with our products. Significant increases in the incidence of such claims may adversely affect our sales and our reputation with consumers. Costs associated with warranty and product liability claims could materially affect our financial condition and results of operations.

We derive almost all of our revenue from three customers and the loss of any of these customers could have a material adverse effect on our revenues.

For the year ended September 28, 2014, we derived approximately 83% of our gross business revenue from three customers: 44% from General Dynamics Land Systems Divisions, 32% from the U.S. Government (primarily DLA/Warren), and 7% from BAE Systems.  Procuring new customers and contracts may partially mitigate this risk. In particular, a decision by either General Dynamics Land System Division or DLA/Warren to cease issuing contracts to us could have a significant material impact on our business and results of operations given that they represent 76% of our gross business revenue. There can be no assurance that we could replace these customers on a timely basis or at all.

We have approximately 75 discrete contracts with General Dynamics Land System Division and the U.S. Government (primarily DLA/Warren), and other prime contractors. If they choose to terminate these contracts, Optex Systems Holdings is entitled to fully recover all contractual costs and reasonable profits incurred up to or as a result of the terminated contract.

We only possess one patent and rely primarily on trade secrets to protect our intellectual property.

We utilize several highly specialized and unique processes in the manufacture of our products, for which we rely solely on trade secrets to protect our innovations. We cannot assure you that we will be able to maintain the confidentiality of our trade secrets or that our non-disclosure agreements will provide meaningful protection of our trade secrets, know-how or other proprietary information in the event of any unauthorized use, misappropriation or other disclosure. The confidentiality agreements that are designed to protect our trade secrets could be breached, and we might not have adequate remedies for the breach.

It is also possible that our trade secrets will otherwise become known or independently developed by our competitors, many of which have substantially greater resources, and these competitors may have applied for or obtained, or may in the future apply for or obtain, patents that will prevent, limit or interfere with our ability to make and sell some of our products. Although based upon our general knowledge (and we have not conducted exhaustive

patent searches), we believe that our products do not infringe on the patents or other proprietary rights of third parties; however, we cannot assure you that third parties will not assert infringement claims against us or that such claims will not be successful.

Optex Systems Holdings has two outstanding patent applications in the United States and foreign countries. While we are optimistic that our applications will be approved, we cannot guarantee that these patent applications will ever result in actual patents being awarded.  The claims were based on technology which is believed to be unique; however, there are many companies and many patents already awarded in this space.  Further, the time frame for the US Patent and Trademark Office to review the patent application and engage in negotiations cannot be guaranteed.

In the future, we may look to acquire other businesses in our industry and the acquisitions will require us to use substantial resources, among other things.

At some time in the future, we may decide to pursue acquisitions of other businesses in our industry. In order to successfully acquire other businesses, we would be forced to spend significant resources in both acquisition and transactional costs, which could divert substantial resources in terms of both financial and personnel capital from our current operations. Additionally, we might assume liabilities of the acquired business, and the repayment of those liabilities could have a material adverse impact on our cash flow. Furthermore, when a new business is integrated into our ongoing business, it is possible that there would be a period of integration and adjustment required which could divert resources from ongoing business operations.

Conversion of our Series A preferred stock could cause substantial dilution to our existing common stock holders, and certain other rights of the preferred stock holders present other risks to our existing common stock holders.

As of December 19, 2014, we had 170,913,943 shares of our common stock issued and outstanding. The outstanding shares of Series A preferred stock are currently convertible into 687,056,918 shares of our common stock, which represents 80.1% of our outstanding common stock assuming a full conversion of the Series A preferred stock into shares of our common stock.  This would greatly dilute the holdings of our existing common stockholders. In addition, the preferred shareholders vote on a one-to-one basis with our common shareholders on an as converted basis.

Furthermore, in the event of liquidation, the holders of our Series A preferred stock would receive priority liquidation payments before payments to common shareholders equal to the amount of the stated value of the preferred stock before any distributions would be made to our common shareholders. The total stated value of our preferred stock is $$6,870,569, so the preferred shareholders would be entitled to receive that amount before any distributions could be made to common shareholders. The liabilities on our balance sheet exceed the liquidation value of our assets; therefore, upon liquidation, there would be no assets remaining for distribution to common shareholders.

The preferred shareholders also have the right, by majority vote of the shares of preferred stock, to generally approve any issuances by us of equity and/or indebtedness, which is not ordinary course of trade indebtedness. Therefore, the preferred shareholders can effectively prevent us from entering into a transaction which they feel is not in their best interests, even if the transaction might otherwise be in the best interests of Optex Systems Holdings and its common shareholders.

Risks Relating to the Majority Ownership Control

One of our directors, who is also one of our executive officers, beneficially owns a substantial percentage of Optex Systems Holdings’ outstanding common stock, which gives him control over certain major decisions on which Optex Systems Holdings’ stockholders may vote, which may discourage an acquisition of Optex Systems Holdings.

As a result of the reorganization, Sileas Corp., which is owned by Optex Systems Holdings’ three officers (two of which are also directors of Optex Systems Holdings), beneficially owns in the aggregate, 86.2% of Optex Systems Holdings’ outstanding common stock. One director who is also an executive officer, Stanley Hirschman, owns the

majority equity interest in Sileas. The interests of Optex Systems Holdings’ management may differ from the interests of other stockholders. As Optex Systems Holdings’ executive management has the right and ability to control virtually all corporate actions requiring stockholder approval, irrespective of how Optex Systems Holdings’ other stockholders may vote, including the following actions:

Optex Systems Holdings’ management’s beneficial stock ownership may discourage a potential acquirer from seeking to acquire shares of Optex Systems Holdings’ common stock or otherwise attempting to obtain control of Optex Systems Holdings, which in turn could reduce the stock price or prevent Optex Systems Holdings’ stockholders from realizing a premium over Optex Systems Holdings’ stock price.

The Financial Industry Regulatory Authority, or FINRA, has adopted sales practice requirements which may also limit a shareholder’s ability to buy and sell our stock.

FINRA has adopted rules that require that in recommending an investment to a customer, a broker-dealer must have reasonable grounds for believing that the investment is suitable for that customer. Prior to recommending speculative low priced securities to their non-institutional customers, broker-dealers must make reasonable efforts to obtain information about the customer’s financial status, tax status, investment objectives and other information. Under interpretations of these rules, FINRA believes that there is a high probability that speculative low priced securities will not be suitable for at least some customers. FINRA requirements make it more difficult for broker-dealers to recommend that their customers buy our common stock, which may limit your ability to buy and sell our stock and have an adverse effect on the market for its shares.

Risks Relating to our Common Stock

Optex Systems Holdings’ stock price may be volatile.

The market price of Optex Systems Holdings’ common stock is likely to be highly volatile and could fluctuate widely in price in response to various factors, many of which are beyond Optex Systems Holdings’ control, including the following:

In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of Optex Systems Holdings’ common stock.

There is currently no liquid trading market for Optex Systems Holdings’ common stock, and Optex Systems Holdings cannot ensure that one will ever develop or be sustained.

Our common stock is currently approved for quotation on the OTC Markets OTCQB trading under the symbol OPXS. However, there is limited trading activity and not currently a liquid trading market. There is no assurance as to when or whether a liquid trading market will develop, and if such a market does develop, there is no assurance that it will be maintained. Furthermore, for companies whose securities are quoted on the OTC markets, it is more difficult (1) to obtain accurate quotations, (2) to obtain coverage for significant news events because major wire services generally do not publish press releases about such companies, and (3) to raise needed capital. As a result, purchasers of Optex Systems Holdings’ common stock may have difficulty selling their shares in the public market, and the market price may be subject to significant volatility.

The elimination of monetary liability against Optex Systems Holdings’ directors, officers and employees under Delaware law and the existence of indemnification rights to Optex Systems Holdings’ directors, officers and employees may result in substantial expenditures by Optex Systems Holdings and may discourage lawsuits against Optex Systems Holdings’ directors, officers and employees.

Optex Systems Holdings provides indemnification to its directors and officers to the extent provided by Delaware law. The foregoing indemnification obligation could result in Optex Systems Holdings incurring substantial expenditures to cover the cost of settlement or damage awards against directors and officers, which Optex Systems Holdings may be unable to recoup. These provisions and resultant costs may also discourage Optex Systems Holdings from bringing a lawsuit against directors and officers for breaches of their fiduciary duties and may similarly discourage the filing of derivative litigation by Optex Systems Holdings’ stockholders against Optex Systems Holdings’ directors and officers even though such actions, if successful, might otherwise benefit Optex Systems Holdings and its stockholders.

Item 2  Properties

We are located in Richardson, TX in approximately 49,000 square foot facility, and as of December 19, 2014, we had 53 full time equivalent employees. We operate with a single shift, and capacity could be expanded by adding a second shift.  Our proprietary processes and methodologies provide barriers to entry by other competing suppliers. In many cases, we are the sole source provider or one of only two providers of a product.  We have capabilities which include machining, bonding, painting, tracking, engraving and assembly and can perform both optical and environmental testing in-house.

We lease our facility. Effective as of December 10, 2013, and executed on December 10, 2013, Optex Systems Holdings, Inc. renewed its Richardson, TX lease. Under the terms of the amendment:

In November 2014, we also acquired a new business unit from L-3 Communications, Inc., which is described herein under “Recent Events — Acquisition”. The acquisition, Applied Optics Center (AOC), is located in Dallas, Texas. . As of December, 19, 2014, Applied Optics Center operates with 27 full time equivalent employees in a single shift operation. In conjunction with the acquisition of the Purchased Assets, Optex Systems assumed the obligations the lease for the Dallas Applied Optics Center site. The lease consists of approximately 56,633 square feet of space at the premises, with a monthly rental of approximately $32,000 per month. The term of the lease expires September 30, 2016, and there are four renewal options available to the tenant, and each renewal term is five years in duration.

Item 3  Legal Proceedings

None.

Item 4  Mine Safety Disclosures

None.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Effective with the start of trading on May 1, 2009, our stock received a ticker symbol change from “SSTX” to “OPXS” from FINRA and commenced trading under the new symbol on the OTC Bulletin Board. Trading in our stock has historically been sporadic, trading volumes have been low, and the market price has been volatile.

The following table shows the range of high and low prices for our common stock as reported by the OTC Bulletin Board or OTC Markets for each quarter since the first fiscal quarter of 2013. All prices are adjusted for the 2.5:1 forward split of the Company’s common stock authorized on February 27, 2009. All prices are derived from market information as to OTCBB/OTCQB prices as reported through the AOL Finance look up system. The quotations reflect inter-dealer prices, without retail markup, markdown or commission and may not represent actual transactions.

On December 18, 2014, the sale price for our common stock as reported on the OTC Markets was $0.01 per share.

Securities outstanding and holders of record

On December 19, 2014, there were approximately 80 record holders of our common stock and 170,913,943 shares of our common stock issued and outstanding.

Dividend Policy

We have not paid and do not expect to pay dividends on our common stock. Any future decision to pay dividends on our common stock will be at the discretion of our board and will depend upon, among other factors, our results of operations, financial condition and capital requirements.

Information respecting equity compensation plans

Summary Equity Compensation Plan Information

Optex Systems Holdings adopted its 2009 Stock Option Plan on March 26, 2009.  On December 9, 2011, the Board of Directors of Optex Systems Holdings, Inc.  authorized an amendment to its Stock Option Plan to increase the number of issuable shares from 6,000,000 to 50,000,000 and authorized the grant of 10,000,000 options to two board members and a total of 36,070,000 to Optex Systems Holdings employees including 20,000,000 options to executive officers. On December 19, 2013, the Board of Directors of Optex Systems Holdings, Inc. authorized an amendment to its Stock Option Plan to increase the number of issuable shares from 50,000,000 to 75,000,000 and authorized the grant of 20,000,000 options to three board members and a grant of 5,000,000 to an Optex Systems Holdings officer. The options granted in 2011 and 2013 were at exercise prices of $0.01per share with each grant to vest 25% per year over four years for each year with which the grantee is still employed by or serving as a director of Optex Systems Holdings, Inc. (with all unvested options automatically expiring on the date of termination of employment by or service as a director of Optex Systems Holdings, Inc.) and all unvested options immediately vesting upon a change of control due to a merger or acquisition of the Company. As of December 19, 2014, 5,840,000 of these options had forfeited due to terminations, and 45,306,649 had vested.

Item 7  Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the consolidated financial statements and the related notes that are set forth in our financial statements elsewhere in this annual report.

This management’s discussion and analysis reflects information known to management as of our fiscal year end, September 28, 2014, and the date of filing. This MD&A is intended to supplement and complement our audited financial statements and notes thereto for the year ended September 28, 2014, prepared in accordance with U.S. generally accepted accounting principles (GAAP). You are encouraged to review our financial statements in conjunction with your review of this MD&A. The financial information in this MD&A has been prepared in accordance with GAAP, unless otherwise indicated. In addition, we use non-GAAP financial measures as supplemental indicators of our operating performance and financial position. We use these non-GAAP financial measures internally for comparing actual results from one period to another, as well as for planning purposes. We will also report non-GAAP financial results as supplemental information, as we believe their use provides more insight into our performance. When a non-GAAP measure is used in this MD&A, it is clearly identified as a non-GAAP measures and reconciled to the most closely corresponding GAAP measure.

The following discussion highlights the principal factors that have affected our financial condition and results of operations as well as our liquidity and capital resources for the periods described.  This discussion contains forward-looking statements. Please see “Special cautionary statement concerning forward-looking statements” and “Risk factors” for a discussion of the uncertainties, risks and assumptions associated with these forward-looking statements. The operating results for the periods presented were not significantly affected by inflation.

Background

On March 30, 2009, a reorganization was consummated pursuant to which the then existing shareholders of Optex Systems, Inc. (Delaware) exchanged their shares of common stock for shares of common stock of Optex Systems Holdings as follows:  (i) the outstanding 85,000,000 shares of Optex Systems, Inc. (Delaware) common stock were exchanged by Optex Systems Holdings for 113,333,282 shares of Optex Systems Holdings common stock, (ii) the outstanding 1,027 shares of Optex Systems, Inc. (Delaware) Series A preferred stock were exchanged by Optex Systems Holdings for 1,027 shares of Optex Systems Holdings Series A preferred stock, and (iii) the 8,131,667 shares of Optex Systems, Inc. (Delaware) common stock purchased in the private placement were exchanged by Optex Systems Holdings for 8,131,667 shares of Optex Systems Holdings common stock.  Optex Systems, Inc. (Delaware) has remained a wholly-owned subsidiary of Optex Systems Holdings.

As a result of the reorganization, Optex Systems Holdings changed its name from Sustut Exploration Inc. to Optex Systems Holdings, Inc., and its year end from December 31 to a fiscal year ending on the Sunday nearest September 30.

Optex Systems, Inc. (Delaware) manufactures optical sighting systems and assemblies, primarily for Department of Defense applications. Its products are installed on various types of U.S. military land vehicles, such as the Abrams and Bradley fighting vehicles, light armored and armored security vehicles and have been selected for installation on the Stryker family of vehicles. Optex Systems, Inc. (Delaware) also manufactures and delivers numerous periscope configurations, rifle and surveillance sights and night vision optical assemblies.  Optex Systems, Inc. (Delaware) products consist primarily of build-to-customer print products that are delivered both directly to the armed services and to other defense prime contractors.  Less than 1% of today’s revenue is related to the resale of products substantially manufactured by others.  In this case, the product would likely be a simple replacement part of a larger system previously produced by Optex Systems, Inc. (Delaware).

A majority of our contracts are prime or subcontracted directly with the Federal government and, as such, are subject to Federal Acquisition Regulation Subpart 49.5, “Contract Termination Clauses” and more specifically Federal Acquisition Regulation  clauses 52.249-2 “Termination for Convenience of the Government Fixed-Price)”, and 49.504 “Termination of fixed-price contracts for default”.  These clauses are standard clauses on our prime military contracts and generally apply to us as subcontractors.  It has been our experience that the termination for

convenience is rarely invoked, except where it is mutually beneficial for both parties.  We are currently not aware of any pending terminations for convenience or for default on our existing contracts.

By way of background, the Federal Acquisition Regulation is the principal set of regulations that govern the acquisition process of government agencies and contracts with the U.S. government. In general, parts of the Federal Acquisition Regulation are incorporated into government solicitations and contracts by reference as terms and conditions effecting contract awards and pricing solicitations.

In the event a termination for convenience were to occur, Federal Acquisition Regulation  clause 52.249-2 provides for full recovery of all contractual costs and profits reasonably occurred up to and as a result of the terminated contract. In the event a termination for default were to occur, we could be liable for any excess cost incurred by the government to acquire supplies from another supplier similar to those terminated from us. We would not be liable for any excess costs if the failure to perform the contract arises from causes beyond the control and without the fault or negligence of the company as defined by Federal Acquisition Regulation clause 52.249-8. In addition, the Government may require us to transfer title and deliver to the Government any completed supplies, partially completed supplies and materials, parts, tools, dies, jigs, fixtures, plans, drawings, information, and contract rights that we have specifically produced or acquired for the terminated portion of this contract. The Government shall pay contract price for completed supplies delivered and accepted, and we and the Government would negotiate an agreed upon amount of payment for manufacturing materials delivered and accepted and for the protection and preservation of the property. Failure to agree on an amount for manufacturing materials is subject to the Federal Acquisition Regulation Disputes clause 52.233-1. 

Many of our contracts allow for government contract financing in the form of contract progress payments pursuant to Federal Acquisition Regulation 52.232-16, “Progress Payments”.  As a small business, and subject to certain limitations, this clause provides for government payment of up to 90% of incurred program costs prior to product delivery.  To the extent our contracts allow for progress payments, we intend to utilize this benefit, thereby minimizing the working capital impact on Optex Systems Holdings for materials and labor required to complete the contracts.

Our contracts allow for Federal Acquisition Regulation 52.243-1 which entitles the contractor to an “equitable adjustment” to the contract if the contract changes result in a change in contract costs or time of performance.  In essence, an equitable price adjustment request is a request for a contract price modification (generally an increase) that allows for the contractor to be “made whole” for additional costs incurred which were necessitated by some modification of the contract effort.  This modification may come from an overt change in U.S. Government requirements or scope, or it may come from a change in the conditions surrounding the contract (e.g., differing site conditions or late delivery of U.S. Government-furnished property) which result in statement of work additions, deletions, part substitutions, schedule or other changes to the contract which impact the contractor’s overall cost to complete. Optex has submitted an equitable adjustment request on the Aiming Circle Howitzer program due to significant design issues impacting the manufacturability of the product. The requested equitable adjustment claim was formally rejected by the contracting agency on May 31, 2012; however, Optex Systems Holdings has appealed the decision with the Armed Services Board of Contract Appeals. While we remain optimistic that Optex has a justifiable claim, we cannot predict whether the appeal will be successful. In the event we are unsuccessful in obtaining an equitable adjustment settlement, there will be no future margin impact for on these programs as the losses have been previously recognized through the completion of the program.

In some cases, we may receive an “undefinitized” (i.e., price, specifications and terms are not agreed upon before performance commenced) contract award for contracts that exceed the $700,000, which is the federal government simplified acquisition threshold.  These contracts are considered firm contracts at an undefinitized, but not to exceed specified limits threshold.  Cost Accounting Standards Board covered contracts are subject to the Truth in Negotiations Act disclosure requirements and downward only price negotiation.  As of September 28, 2014, none of our outstanding backlog fell under this criterion.

Results of Operations

Backlog as of September 28, 2014 was $8.7 million as compared to a backlog of $12.3 million as of September 29, 2013, representing decrease of 29.3%.  The following table depicts the current expected delivery by quarter of all contracts awarded as of September 28, 2014.

During 2014, Optex Systems Holdings received orders totaling $6.7 million consisting of $3.7 million from several customers primarily in support of our periscope product line, $1.9 million in DDAN Sighting Systems, and $1.1 million in the other product group. New orders booked in fiscal year 2014, are deliverable primarily in fiscal year 2015. Approximately 40% or $2.7 million of the orders received in fiscal year 2014 were delivered in fiscal year 2014, with the balance to be delivered in fiscal years 2015 through 2018.

Military spending has been negatively impacted by the Budget Control Act of 2011 (BCA), which was passed in August, 2011 mandating $1.2 trillion in automatic spending cuts over a nine-year period to be split between defense and non-defense programs beginning in January 2013. The Bipartisan Budget Act (BBA) which was passed in December, 2013, scaled back mandated reductions for fiscal 2014 and 2015; however federal spending would thus be larger in these two years, but even less in the subsequent years 2016 until 2023. 

The U.S. government spending reductions have had a significant impact on our product lines as our products directly support various types of U.S. military land vehicle procurements. As a direct result of lower U.S. defense procurement spending, Optex Systems Holdings has experienced reduced revenues of 37.1% from fiscal years 2011 through fiscal year 2014. Given the reductions in U.S. military spending in recent years and the budget uncertainty in the coming years, Optex Systems Holdings continues to aggressively pursue international and commercial opportunities in addition to maintaining its current footprint with U.S. vehicle manufactures, with existing as well as new product lines.

On December 12, 2014 Congress passed the National Defense Authorization Act (NDAA) for Fiscal Year 2015, which is the comprehensive legislation to authorize the budget authority of the Department of Defense and the national security programs of the Department of Energy. The bill authorizes $584.2 billion in defense funding for FY2015, a decrease of 4% from the FY2014 authorized NDAA funding of $607 billion. Further, many of the funding and program provisions in the measure last only for one year, pushing long-term decisions off to the new Congress that convenes in January 2015.

As the effect of the mandated budget reductions are scheduled to resume at an increased level starting in fiscal year 2016, the continued uncertainty surrounding the BBA/BCA reductions have resulted in further reductions, delays or cancellations of these programs, and as such we continue to explore other avenues of revenue. We are exploring new opportunities in M17 day/thermal periscopes and digital optics for commercial applications. We are also reviewing potential products, outside our traditional product lines, which could be manufactured using our current production facilities in order to capitalize on our existing capacity. Further, we continue to look for strategic businesses to acquire that will strengthen our existing product line, expand our operations, and enter new markets.

The U.S. military supply industry has become highly competitive as suppliers fight for increased market share to offset the impacts of the reduced government spending. We compete with other suppliers on the basis of quality, delivery, price, and overall customer service, among other things. Our competitors include a number of suppliers, some of which have established strong relationships with the defense contracting agencies. Competition can lead to price reductions, reduced margins and an inability to gain or hold market share. We are aggressively pursuing

additional periscope market share in both foreign and domestic defense contractor markets in order to mitigate the effect the reduced U.S. military orders has on our operations.

In July 2012, Optex System’s primary competitor in plastic periscopes (Miller-Holzwarth) shut down its manufacturing due to what we believe to be reduced U.S. military orders combined with unmet financial obligations. We were able to team with other bidders and as a result purchased approximately $375 thousand worth of abandoned assets in a trustee bankruptcy auction to use in our ongoing business.

The AOC acquisition, noted in “Recent Events” has expanded our ability to bring our technology and products into commercial markets. Commercial optical products around the world use thin film coatings to create product differentiation.  These coatings can be used for redirecting light (mirrors), blocking light (laser protection), absorbing select light (desired wavelengths), and many other combinations.  They are used in telescopes, rifle scopes, binoculars, microscopes, range finders, protective eyewear, photography, etc.  Given this broad potential, the commercial applications are a key opportunity going forward. Further, the AOC acquisition has strengthened our overall position by decreasing the bargaining power of our suppliers through backwards integration of a key supplier and most importantly, creates additional barriers of entry of potential competitors. Overall, the customer base and the competition have seen the acquisition as creating a stronger Optex Systems Holdings.

Optex Systems Holdings also anticipates the opportunity to integrate some of its night vision and optical sights products into commercial applications. 

Twelve month period ended September 28, 2014 compared to the twelve month period ended September 29, 2013

Revenues:

The table below details the revenue changes by product line for the year ended September 28, 2014 as compared to the year ended September 29, 2013.

As a result of the downturn in U.S. government spending, our total revenues decreased by $6.9 million or (40.4%) in 2014 over 2013 levels. The U.S. budget reductions have had a more significant impact on the U.S. military combat procurement budget, which includes land vehicles, as Congress has been reluctant and slow to make cost reductions to veteran armed force salaries and benefits as an offset the decreased spending levels. As the majority of our products directly support the U.S. military land vehicles, the significant reductions in the U.S. military procurement budget have materially impacted our customer base as well as our operations. Based on the December, 2014, National Defense Authorization Act for fiscal 2015, the expected total U.S. military appropriations budget is approximately 4% below the fiscal year 2014 levels. Although, it is too early to determine exactly how the NDAA will impact the U.S. combat procurement levels in the next twelve months, we are anticipating additional revenue reductions of between of 5.0% to 10.0% across our existing Optex Systems product lines.

Revenue decreased by ($6.4) million or 49.2% on our periscope line during fiscal year 2014 as compared to fiscal year 2013.  During fiscal year 2013, Optex Systems experienced a substantial increase in plastic periscope revenue in support of additional foreign orders and for new customer orders as a direct result of the plant closure of our

primary plastic periscope competitor, Miller-Holzwarth, Inc., in July, 2012. The increased revenues from plastic periscopes provided a Optex with a strong buffer against the otherwise devastating impact of the U.S. military spending reductions in recent years. However, the reduced government spending on Striker Combat Vehicles, which utilize our plastic laser periscopes, and reduced spending on the Abrams Tank, which utilize both our glass and plastic periscopes, has culminated in lower orders and revenues in fiscal 2014 from our prime customers in support of those ongoing programs. Thus, despite the temporary fiscal year 2013 increase in periscope revenue, the fiscal year 2014 revenue across all of our periscope programs is approximately 40% below the historic revenues experienced in both fiscal years 2011 and 2012. In addition, the effect of the decreased government spending has had an unfavorable impact on our ability to absorb fixed overhead across the smaller volume base, thereby increasing our pricing rates.  This in turn has made our pricing less competitive allowing other potentially lower cost entrants into the market. Based on current backlog requirements and projected orders for fiscal 2015, we may realize additional reductions in periscope revenues between 25-30% during the next twelve months. We continue to quote and receive awards for periscopes, at reduced volumes, from multiple customers and are aggressively pursuing increased market share for all the available funding within the domestic periscope market. We are optimistic that our November 2014 acquisition of Applied Optical Center (AOC) from L-3 will position Optex Systems to provide more competitive pricing on new solicitations and bar entry of additional competition to our base periscope business. We cannot yet determine how successful we will be in gaining new periscope orders to offset continued reductions in U.S. military spending.

Sighting systems revenues decreased ($0.1) million, or (5.2%), over the prior year. The decrease in revenues is attributable to a reduction in back-up sights and spare units from the prior year deliveries. In the next twelve months, we expect deliveries on sighting systems to increase by 30-50% due to increased contractual quantities deliverable against our DDAN M36 sight assemblies through fiscal year 2015. We expect the increased DDAN deliveries to partially mitigate the revenue reduction on our periscope product line during the next twelve months. In addition, we continue to ship small sighting systems orders pursuant to other contracts to both federal government and non-U.S. government customers and continue to pursue business on several substantial programs for commander weapon sighting systems and M36 thermal sighting units.

Decreases in the other product lines were ($0.4) million, or (18.2%) for the year ending September 28, 2014 compared to the year ending September 29, 2013. Overall revenue decreases are attributable to reduced government spending and the completion of the U.S. government gunner head assemblies in the third quarter of 2013. We anticipate fiscal year 2015 revenues to be at or near fiscal 2014 levels, however due the budget uncertainties and recent delays government procurements, combined with a low year-end backlog in this category, it is impossible to determine the overall impact military spending reductions will have on these products during fiscal year 2015. Revenues included in this category tend to be shorter term, unique one time orders with the U.S. government, research and development efforts, or miscellaneous spares parts or supply orders.

Cost of Goods Sold. During the fiscal year ended September 28, 2014, we recorded cost of goods sold of $8.8 million as compared to $13.9 million during the fiscal year ended September 29, 2013, a decrease of $5.1 million or (36.7%). The gross margin during the period ending September 28, 2014 was 13.7% of revenue as compared to a gross margin of 18.7% of revenue for the period ending September 29, 2013. The increased cost of sales and decrease in gross margin percentage for the year as compared to the prior year is primarily due the decrease in revenue of ($6.9) million combined with a loss of labor efficiencies and higher (unabsorbed) overhead rates than originally projected as a result of the significant drop in production.

G&A Expenses.  During the fiscal year ended September 28, 2014, we recorded operating expenses of $2.4 million as opposed to $3.0 million during the period ending September 29, 2013, a decrease of ($0.6) million or (20.0%)  Operating expenses are down from the previous year period due to significant cuts in discretionary spending including labor and labor related costs of ($0.3), million, research and development of ($0.1) million, and other discretionary spending reductions of ($0.3) million in building maintenance, advertising, and other partially offset by $0.1 million in increased legal expenses for activity related to the equitable adjustment request on the Howitzer Aiming Circle. We expect general and administrative expenses to continue at a reduced level into the next year in to mitigate the impact of lower revenues forecasts.

Operating Income (Loss).  During the period ending September 28, 2014, we recorded, an operating loss of ($0.98) million as compared to a net operating income of $0.26 million during the period ending September 29, 2013.  The

loss in operating income of ($1.24) million is primarily due to lower revenue of ($6.9) million, resulting in reduced gross margins of ($1.8) million partially offset with decreased general and administrative spending of $(0.6) million.

Net Income (Loss) applicable to common shareholders.  During the period ended September 28, 2014, we recorded, net loss of ($2.06) million as compared to a net income of $0.14 million for the period ended September 29, 2013. The change increased loss of ($2.2) million is primarily attributable an increased operating loss of (1.2) million combined with and increased tax expense of ($1.0) million due to the write down of deferred tax assets in fiscal 2014.

Liquidity and Capital Resources

On May 22, 2014, the Company amended its revolving credit facility with Avidbank. The new renewable revolving maturity date is May 21, 2016. The facility provides up to $1 million in financing against eligible receivables and subject to meeting certain covenants including an asset coverage ratio test for up to two years. The material terms of the amended revolving credit facility are as follows:

As of September 28, 2014, the outstanding balance on the line of credit was $0.  For the years ended September 28, 2014 and September 29, 2013, the total interest expense against the outstanding line of credit balance was $21 thousand and $42 thousand, respectively. During the twelve months ended September 28, 2014, Optex Systems Holdings separately recognized $13 thousand in interest income related to financing fees on a foreign sale. There was zero in interest income for the twelve months ended September 29, 2013.

We have historically met our liquidity requirements from a variety of sources, including government and customer funding through contract progress bills, milestone invoices, short term loans, notes from related parties, and the sale of equity securities. Based upon our current working capital position and potential for expanded business revenues, we believe that our working capital is sufficient to fund our current operations for at least the next 12 months. However, based on our strategy and the anticipated growth in our business, we believe that our liquidity needs may increase in the future. The amount of such increase will depend on many factors, including the costs associated with the fulfillment of our projects, whether we upgrade our technology, and the amount of inventory required for our expanding business. If our liquidity needs do increase, we believe additional capital resources will be obtained from a variety of sources including, but not limited to, cash flow from operations and the issuance of our common stock and/or debt, including receivables funding through a commercial lender .

In addition, Optex Systems Holdings has requested an equitable adjustment on a previously completed Howitzer program due to significant design issues that impacted the manufacturability of the product. As there is no guarantee

that the request will be granted in part or in full, we realized the entire loss in fiscal year 2010. The requested equitable adjustment claim was formally rejected by the contracting agency on May 31, 2012; however, Optex Systems Holdings has appealed the decision with the Armed Services Board of Contract Appeals (ASBCA). In November 2014, the ASBCA judge issued a decision in favor of Optex Systems Inc. against the government agency asserted position for a waiver of the claim. As of the date of this report issuance, we are awaiting a decision by the agency on their position in respect to the judge’s ruling for the next phase of the appeal process. While we remain optimistic that Optex has a justifiable claim, we cannot predict the outcome of the appeal will be successful. In the event we are unsuccessful in obtaining an equitable adjustment settlement, there will be no future margin impact for on these programs as the losses have been previously recognized through the completion of the program.  To the extent we are able to recover increased costs (losses) against the program; we expect the settlement would have a positive impact on working capital.

Period of September 29, 2013 through September 28, 2014

Cash and Cash Equivalents.  As of September 28, 2014, we had cash and cash equivalents of $1.7 million as compared to $$0.9 million as of September 29, 2013. We increased cash and cash equivalents by $0.8 million.

Net Cash (Used by) Provided by Operating Activities.  Net cash provided by operating activities during the period beginning September 29, 2013 and ending September 28, 2014 totaled $1.7 million. The primary sources in cash were collections 2013 accounts receivable balances of $2.4 million, shipments of inventories purchased in fiscal 2013of $1.6 million and other of $0.2 million. The increased cash was offset by reductions in customer deposit accounts of ($0.6) million, reductions in outstanding accounts payables of ($0.9) million and operating losses ($1.0) million.

Net Cash (Used) by Investing Activities.  In the twelve months ended September 28, 2014, total cash used in investing activities was $(0.01) due to the purchase of property and equipment for $(0.04) million and the amortization of prepaid royalties of $0.03 million of the prior year purchased patent license..

Net Cash (Used) by Financing Activities. Net used by financing activities totaled ($0.9) million during the twelve months ended September 30, primarily due to the payment against the line of credit balance from fiscal year 2013. As of September 28, 2014 our outstanding balance on the line of credit was $0.0 million.

Critical Accounting Policies

Stock-Based Compensation: In December 2004, FASB issued FASB ASC 718 which establishes standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services.  It also addresses transactions in which an entity incurs liabilities in exchange for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments.  FASB ASC 718 focuses primarily on accounting for transactions in which an entity obtains employee services in share-based payment transactions.  FASB ASC 718 requires that the compensation cost relating to share-based payment transactions be recognized in the financial statements.  That cost will be measured based on the fair value of the equity or liability instruments issued.

Optex Systems Holdings’ accounting policy for equity instruments issued to consultants and vendors in exchange for goods and services follows the provisions of FASB ASC 505-50, which establish the measurement date for the fair value of the equity instruments issued is determined at the earlier of (i) the date at which a commitment for performance by the consultant or vendor is reached or (ii) the date at which the consultant or vendor’s performance is complete. In the case of equity instruments issued to consultants, the fair value of the equity instrument is recognized over the term of the consulting agreement.  Stock-based compensation related to non-employees is accounted for based on the fair value of the related stock or options or the fair value of the services, whichever is more readily determinable in accordance with FASB ASC 718.

Income Tax/Deferred Tax: FASB ASC 740 requires recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax assets and liabilities are determined based on differing treatment of items for financial reporting and income tax reporting purposes. The deferred tax balances are adjusted to reflect tax rates by tax

jurisdiction, based on currently enacted tax laws, which will be in effect in the years in which the temporary differences are expected to reverse. Under FASB ASC 740, the effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. A valuation allowance is provided for certain deferred tax assets if it is more likely than not that Optex Systems Holdings will not realize tax assets through future operations. When assessing the recoverability of deferred tax assets, management considers the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies. Based on those estimates, management has determined the balance of deferred tax assets will not be realized and has increased the valuation allowance reserves by $1.1 million during 2014. As of September 28, 2014 Optex Systems Inc. has a total deferred tax asset reserve of ($4.0) million against a total deferred tax asset of $4.0 million.

The difference between the income tax expense and pretax accounting income is primarily attributable the increase in the deferred tax asset valuation reserve of $1.1 million during the twelve months ended September 28, 2014.

Revenue Recognition: Optex Systems Holdings recognizes revenue based on the modified percentage of completion method utilizing the units-of-delivery method, in accordance with FASB ASC 605-35:

The units-of-delivery method recognizes as revenue the contract price of units of a basic production product delivered during a period and as the cost of earned revenue the costs allocable to the delivered units. Costs allocable to undelivered units are reported in the balance sheet as inventory or work in progress. The method is used in circumstances in which an entity produces units of a basic product under production-type contracts in a continuous or sequential production process to buyers’ specifications.

Optex Systems Holdings contracts are fixed price production type contracts whereby a defined order quantity is delivered to the customer during a continuous or sequential production process tailored to the buyer’s specifications (build to print).  Optex Systems Holdings’ deliveries against these contracts generally occur in monthly increments across fixed delivery periods spanning from 3 to 36 months.

Optex Systems Holdings may at times have contracts that allow for invoicing based on achievement of milestone events. In such cases, Optex Systems Inc. recognizes revenue based on the milestone method in accordance with FASB ASC 605-28, as applicable. On October 24, 2011, Optex Systems, Inc. was awarded an $8.0 million contract with General Dynamics Land Systems - Canada that provided for milestone invoices up to a total of $3.9 million. Currently, there are no additional contracts providing for milestone payments. In accordance with FASB 605-28, Optex Systems, Inc. recognizes milestone payments as revenue upon completion of a substantive milestone as commensurate with the following guidelines: our performance to achieve the milestone, the milestone relates solely to past performance and is reasonable relative to all of the deliverables and payment terms within the arrangement. Milestones are not considered as substantive if any portion of the associated milestone consideration relates to the remaining deliverables in the unit of accounting. Non-substantive milestone payments are reported as a liability on the balance sheet as Short Term and Long Term Customer Advance Deposits.

Pursuant to the contract, all substantive milestones were completed as of September 30, 2012 and as such, there was zero revenue recognized for milestones in the years ending September 28, 2014 and September 29, 2013. As of September 28, 2013 all of the milestone events were completed and there were no unpaid/invoiced customer deposits related to the completed milestone events.

Customer Advance Deposits: Customer advance deposits represent amounts collected from customers in advance of shipment or revenue recognition which relate to undelivered product due to non-substantive milestone payments or other cash in advance payment terms. As of September 28, 2014, Optex Systems, Inc. had a balance of $2.1 million in customer advance deposits related to non-substantive milestone billings. The terms of the contract extend through 2017 during which time we are required to purchase the necessary materials to fulfill the delivery of products required by the contract. Of the total collected customer advance deposits, $1.1 million related to short term customer advance deposits for deliveries to occur within the next twelve months and $1.0 million related long term customer advance deposits for deliveries occurring after September 2015.

Estimated Costs at Completion and Accrued Loss on Contracts:  Optex Systems Holdings reviews and reports on the performance of its contracts and production orders against the respective resource plans for such contracts/orders. These reviews are summarized in the form of estimates at completion. Estimates at completion

include Optex Systems Holdings’ incurred costs to date against the contract/order plus management’s current estimates of remaining amounts for direct labor, material, other direct costs and subcontract support and indirect overhead costs based on the completion status and future contractual requirements for each order.

If an estimate at completion indicates a potential overrun against budgeted resources for a fixed price contract/order, management first attempts to implement lower cost solutions that will profitably meet the requirements of the fixed price contract. If such solutions do not appear practicable, management makes a determination whether to seek renegotiation of contract or order requirements from the customer. If neither cost reduction nor renegotiation appears probable, an accrual for the contract loss/overrun is recorded against earnings and the loss is recognized in the first period the loss is identified based on the most recent estimates at completion of the particular contract or product order. As of September 28, 2014 there was $11 thousand in contract loss reserves related to cost overruns incurred on a small contract scheduled to complete in October 2014. As of September 29, 2013 the contract loss reserves were zero.

During 2010, Optex Systems Holdings realized increased losses against the Howitzer programs of $1.1 million of which $0.8 million related specifically to production issues encountered on one of our Howitzer product lines.  Increased losses were primarily attributable to manufacturing issues on our U.S. government Howitzers culminating in higher material scrap and labor hours, combined with a reduction in total production volume in 2010 which further impacted production efficiencies across all product lines.  Optex Systems Holdings has requested an equitable adjustment on this program due to significant design issues impacting the manufacturability of the product.  As there is no guarantee that the request will be granted in part or in full, we realized the entire loss in fiscal year 2010. The requested equitable adjustment claim was formally rejected by the contracting agency on May 31, 2012; however, Optex Systems Holdings has appealed the decision with the Armed Services Board of Contract Appeals (ASBCA). While we remain optimistic that Optex has a justifiable claim, we cannot predict the outcome of the appeal will be successful. In November 2014, the ASBCA judge issued a decision in favor of Optex Systems Inc. against the government agency asserted position for a waiver of the claim. As of the date of this report issuance, we are awaiting a decision by the agency on their position in respect to the judge’s ruling for the next phase of the appeal process. In the event we are unsuccessful in obtaining an equitable adjustment settlement, there will be no future margin impact for on these programs as the losses have been previously recognized through the completion of the program.

Government Contracts: Many of our contracts are prime or subcontracted directly with the Federal government and as such, are subject to Federal Acquisition Regulation Subpart 49.5, “Contract Termination Clauses” and more specifically Federal Acquisition Regulation clauses 52.249-2  “Termination for Convenience of the Government (Fixed-Price)”, and 49.504 “Termination of fixed-price contracts for default”.

Warranty Costs: Some of Optex Systems Holdings’ customers require that the company warrant the quality of its products to meet customer requirements and be free of defects for up to fifteen months subsequent to delivery.   Future warranty costs are based on the estimated cost of replacement for expected returns based upon our most recent experience rate of defects as a percentage of warranty covered sales. Throughout the year, warranty costs are expensed as incurred, and as of each year end, Optex Systems Holdings reviews the prior 15 month warranty experience rate and may adjust the warranty accrual as required to cover any additional anticipated warranty costs related to prior shipments. As of September 28, 2014 and September 29, 2013, the existing warranty reserve balance of $25 thousand was reviewed and determined to be adequate to satisfy any future warranty claims that may have existed as of the end of each fiscal year for shipments occurring in the prior 15 months.

Recent Accounting Pronouncements.

In August 2014, FASB issued ASU 2014-15—Presentation of Financial Statements—Going Concern (ASC Subtopic 205-40): “Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern”. The update requires management to assess a company’s ability to continue as a going concern and to provide related footnote disclosures in certain circumstances. All entities are required to apply the new requirements in annual periods ending after December 15, 2016, and interim periods thereafter. Early application is permitted. As such, Optex Systems Holdings is required to adopt these provisions for the annual period ending October 1, 2017. Optex Systems Holdings is currently evaluating the impact of FASB ASU 2014-15 but does not expect the adoption thereof to have a material effect on Optex Systems Holdings’ financial statements.

In May 2014, FASB issued ASU 2014-09—Revenue from Contracts with Customers (Topic 606): “Section A—Summary and Amendments That Create Revenue from Contracts with Customers, (Topic 606) and Other Assets and Deferred Costs—Contracts with Customers (Subtopic 340-40), Section B—Conforming Amendments to Other Topics and Subtopics in the Codification and Status Tables, Section C—Background Information and Basis for Conclusions”. The guidance in this update affects any entity that enters into contracts with customers to transfer goods or services and supersedes the revenue recognition requirements in Topic 605, Revenue Recognition. The update is effective for annual reporting periods beginning after December 15, 2016, including interim periods within that reporting period. Early application is not permitted. As such, Optex Systems Holdings is required to adopt these provisions as of October 2, 2017, the beginning of the annual period ending September 30, 2018 and at the beginning of all interim periods ending after October 1, 2017. Optex Systems Holdings is currently evaluating the impact of FASB ASU 2014-09 but does not expect the adoption thereof to have a material effect on Optex Systems Holdings’ financial statements.

In July 2013, FASB issued ASU 2013-11—Income Taxes (ASC Topic 740): “Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists (a consensus of the FASB Emerging Issues Task Force)”. The amendments in this update provide explicit guidance on the financial statement presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists at the reporting date. The update is effective for fiscal years, and interim periods within those years, beginning after December 15, 2013. As such, Optex Systems Holdings has adopted these provisions at the beginning of the interim period ending March 30, 2014. Adoption FASB ASU 2013-11 did not have a material effect on Optex Systems Holdings’ financial statements.

Cautionary Factors That May Affect Future Results

This Report on Form 10-K and other written reports and oral statements made from time to time by Optex Systems Holdings may contain so-called “forward-looking statements,” all of which are subject to risks and uncertainties. You can identify these forward-looking statements by their use of words such as “expects,” “plans,” “will,” “estimates,” “forecasts,” “projects” and other words of similar meaning. You can identify them by the fact that they do not relate strictly to historical or current facts. These statements are likely to address Optex Systems Holdings’ growth strategy, financial results and product and development programs. You must carefully consider any such statement and should understand that many factors could cause actual results to differ from Optex Systems Holdings’ forward-looking statements. These factors include inaccurate assumptions and a broad variety of other risks and uncertainties, including some that are known and some that are not. No forward-looking statement can be guaranteed and actual future results may vary materially.

We do not assume the obligation to update any forward-looking statement. You should carefully evaluate such statements in light of factors described in this prospectus. In this prospectus Optex Systems Holdings has identified important factors that could cause actual results to differ from expected or historic results. You should understand that it is not possible to predict or identify all such factors. Consequently, you should not consider any such list to be a complete list of all potential risks or uncertainties.

Item 8  Financial Statements and Supplementary Data

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and

Stockholders of Optex Systems Holdings, Inc.

Richardson, Texas

We have audited the accompanying consolidated balance sheets of Optex Systems Holdings, Inc. (the Company) as of September 28, 2014 and September 29, 2013, and the related consolidated statements of operations, stockholders’ equity, and cash flows for the years then ended . The Company’s management is responsible for these consolidated financial statements. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Optex Systems Holdings, Inc. as of September 28, 2014, and the results of its operations and its cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.

December 22, 2014

Optex Systems Holdings, Inc.

Consolidated Balance Sheets

The accompanying notes are an integral part of these financial statements

Optex Systems Holdings, Inc.

Consolidated Statements of Operations

The accompanying notes are an integral part of these financial statements

Optex Systems Holdings, Inc.

Consolidated Statements of Cash Flows

The accompanying notes are an integral part of these financial statements

Optex Systems Holdings, Inc.

Consolidated Statement of Stockholders’ Equity

(Thousands, except share data)

The accompanying notes are an integral part of these financial statements

Note 1 — Organization and Operations

On March 30, 2009, Optex Systems Holdings, Inc. (formerly known as Sustut Exploration, Inc.), a Delaware corporation (“Optex Systems Holdings”), along with Optex Systems, Inc., a privately held Delaware corporation (“Optex Systems, Inc. “), which is a wholly-owned subsidiary of Optex Systems Holdings, entered into a reorganization agreement, pursuant to which Optex Systems, Inc. was acquired by Optex Systems Holdings in a share exchange transaction. Optex Systems Holdings became the surviving corporation. At the closing, there was a name change from Sustut Exploration, Inc. to Optex Systems Holdings, Inc., and its year end changed from December 31 to a fiscal year ending on the Sunday nearest September 30.

On October 14, 2008, certain senior secured creditors of Irvine Sensors Corporation, Longview Fund, L.P. (Longview) and Alpha Capital Anstalt formed Optex Systems, Inc., which acquired all of the assets and assumed certain liabilities of Optex Systems, Inc., a Texas corporation (“Optex Systems, Inc. (Texas)”), and a wholly-owned subsidiary of Irvine Sensors Corporation, in a transaction that was consummated via purchase at a public auction. Following this asset purchase, Optex Systems, Inc. (Texas) remained a wholly-owned subsidiary of Irvine Sensors Corporation.

On February 20, 2009, Sileas Corporation (Sileas), a newly-formed Delaware corporation, owned by present members of Optex Systems Holdings’ management, purchased 100% of Longview’s equity and debt interest in Optex Systems, Inc. (Longview’s interest in Optex Systems, Inc. then representing 90% of the issued and outstanding common equity interests in Optex Systems, Inc.), in a private transaction.

Optex Systems, Inc. operated as a privately-held Delaware corporation until March 30, 2009, when, as a result of a reverse merger transaction consummated pursuant to a reorganization agreement dated March 30, 2009, it became a wholly-owned subsidiary of Optex Systems Holdings. Sileas is the majority owner (parent) of Optex Systems Holdings, owning approximately 85.0% of the issued and outstanding equity interests in Optex Systems Holdings. The financial statements of Optex Systems Holdings represent subsidiary statements and do not include the accounts of its majority owner.

Optex Systems Holdings’ operations are based in Richardson, Texas in a leased facility comprising 49,100 square feet. As of September 28, 2014, Optex Systems Holdings operated with 52 full-time equivalent employees.

Optex Systems Holdings manufactures optical sighting systems and assemblies, primarily for Department of Defense and foreign military applications. Its products are installed on a variety of U.S. military land vehicles, such as the Abrams and Bradley fighting vehicles, light armored and advanced security vehicles, and have been selected for installation on the Stryker family of vehicles. Optex Systems Holdings also manufactures and delivers numerous periscope configurations, rifle and surveillance sights and night vision optical assemblies. Optex Systems Holdings’ products consist primarily of build to customer print products that are delivered both directly to the military and to other defense prime contractors.

In February 2009, Optex Systems Holdings’ ISO certification status was upgraded from 9001:2000 to 9001:2008, bringing Optex Systems Holdings into compliance with the new ISO standards rewritten to align with ISO 14001.

During the twelve months ended September 28, 2014, the Company has experienced a 40% decrease in revenues and a net loss as compared to the twelve months ended September 28, 2013.  U.S. military spending declined significantly since its peak in 2010 as a result the withdrawal of troops from Iraq in 2011, the scale back operations Afghanistan, and additional Congressional sequestration cuts to defense spending, which began in fiscal year 2013. The U.S. military spending reductions have had a significant impact on our product lines as our products directly support various types of U.S. military land vehicle procurements. As a direct result of lower U.S. defense procurement spending, Optex Systems Holdings has experienced reduced revenues of 37.1% from fiscal years 2011 through fiscal year 2014. Given the sizable reduction in backlog from 2013 levels, we do not anticipate being able to fully offset the reduced government spending with alternative business in the next twelve months.

Optex Systems Holdings continues to explore other avenues of revenue and aggressively pursue international and commercial opportunities in addition to maintaining its current footprint with U.S. vehicle manufactures, with

existing and new product lines. We are exploring new opportunities in M17 day thermal periscopes and digital optics for commercial applications. We are also reviewing potential products, outside our traditional product lines, which could be manufactured using our current production facilities in order to capitalize on our existing capacity.

Further, we continue to look for strategic businesses to acquire that will strengthen our existing product line, expand our operations, and enter new markets. On November 3, 2014, Optex Systems, Inc. entered into a Purchase Agreement with L-3 Communications, Inc. (“L-3”) pursuant to which Optex purchased from L-3 the assets comprising L-3’s Applied Optics Center (AOC) Products Line (“Purchased Assets”), which is engaged in the production and marketing and sales of precision optical assemblies utilizing thin film coating capabilities for optical systems and components primarily used for military purposes. See Note 14 Subsequent Events.

The Company has historically funded its operations through operations, preferred stock offerings and bank debt.  The Company's ability to generate positive cash flows depends on a variety of factors, including the continued development and successful marketing of the Company's products. At September 28, 2014, the Company had approximately $1.7 million in cash and access to a $1.0 million working line of credit.  The Company expects to continue to incur net losses for at least the next year.  Successful transition to attaining profitable operations is dependent upon achieving a level of revenue adequate to support the Company’s fixed cost structure.  Management of the Company expects to be successful in maintaining sufficient working capital and will manage operations commensurate with its level of working capital through September 27, 2015.  In the event the Company does not successfully implement its ultimate business plan, certain assets may not be recoverable. 

Note 2 — Accounting Policies

Basis of Presentation

Principles of Consolidation:  The consolidated financial statements include the accounts of Optex Systems Holdings and its wholly-owned subsidiary, Optex Systems, Inc.  All significant inter-company balances and transactions have been eliminated in consolidation.

Use of Estimates:  The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statement and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from the estimates.

Segment Reporting: Management has determined that Optex Systems Holdings is organized, managed and internally reported as one business segment. Segments are determined based on differences in products, internal reporting and how operational decisions are made.

Fiscal Year:  Optex System Holdings’ fiscal year ends on the Sunday nearest September 30.  Fiscal year 2014 ended on September 28, 2014 and included 52 weeks.  Fiscal year 2013 ended on September 29, 2013 and included 52 weeks.

Fair Value of Financial Instruments:  FASB ASC 825-10 requires disclosure of fair value information about certain financial instruments, including, but not limited to, cash and cash equivalents, accounts receivable, refundable tax credits, prepaid expenses, accounts payable, accrued expenses, notes payable to related parties and convertible debt-related securities. Fair value estimates discussed herein are based upon certain market assumptions and pertinent information available to management as of fiscal years ended September 28, 2014 and September 29, 2013. The carrying value of the balance sheet financial instruments included in Optex Systems Holdings’ consolidated financial statements approximated their fair values.

Cash and Cash Equivalents:  For financial statement presentation purposes, Optex Systems Holdings considers those short-term, highly liquid investments with original maturities of three months or less to be cash or cash equivalents.

Concentration of Credit Risk: Optex Systems Holdings’ cash and cash equivalents are on deposit with banks. Only a portion of the cash and cash equivalents would be covered by deposit insurance and the uninsured balances are substantially greater than the insured amounts. Although cash and cash equivalent balances exceed insured deposit amounts, management does not anticipate non-performance by the banks.

Optex Systems Holdings’ revenues and accounts receivables for fiscal year ended September 28, 2014 are derived from sales to U.S. government agencies (30%), General Dynamics (47%), BAE Systems (12%), and other contractors (11%).  Optex Systems Holdings does not believe that this concentration results in undue credit risk because of the financial strength of the obligees.

Accounts Receivable: Optex Systems Holdings records its accounts receivable at the original sales invoice amount less liquidations for previously collected advance/progress bills and an allowance for doubtful accounts. An account receivable is considered to be past due if any portion of the receivable balance is outstanding beyond its scheduled due date. On a quarterly basis, Optex Systems Holdings evaluates its accounts receivable and establishes an allowance for doubtful accounts, based on its history of past write-offs and collections, and current credit conditions. No interest is accrued on past due accounts receivable. As of September 28, 2014 and September 29, 2013, Optex Systems Holdings had an allowance for doubtful accounts of $8 thousand and $15 thousand, respectively, for non U.S. government account balances greater than 120 days. As the customer base is primarily U.S. government and government prime contractors, Optex Systems Holdings allowance for doubtful accounts is minimal.  Optex Systems Holdings charges uncollectible accounts to bad debt expense in the period as they are first deemed uncollectible.  In the fiscal years 2014 there was $11 thousand, and in 2013, there was $15 thousand in bad debt expenses associated with uncollectable accounts.

Inventory: Inventory is recorded at the lower of cost or market, and adjusted as appropriate for decreases in valuation and obsolescence. Adjustments to the valuation and obsolescence reserves are made after analyzing market conditions, current and projected sales activity, inventory costs and inventory balances to determine appropriate reserve levels. Cost is determined using the first-in first-out method. Under arrangements by which progress payments are received against certain contracts, the customer retains a security interest in the undelivered inventory identified with these contracts.  Payments received for such undelivered inventory are classified as unliquidated progress payments and deducted from the gross inventory balance.  As of September 28, 2014 and September 29, 2013 inventory included:

Total net inventory decreased $1.7 million during the year ended September 28, 2014. The decrease in net inventory is primarily related to shipments against the 5 year General Dynamics M36 contract for inventories purchased in fiscal year 2013, combined with lower fiscal year 2015 purchase and ending balances due to reduced production rates projected in 2014 and projected into 2015.

Optex Systems Holdings conducts an annual work in process inventory in the fourth quarter of each fiscal year and cycle counts raw material and finished goods on a monthly basis.  The accounting records are adjusted to reflect any changes in the physical inventory valuation as compared to the book carrying values based on the results of the physical inventory and cycle counts.  In 2014, Optex Systems Holdings recognized a net inventory adjustment of $127 thousand as compared to a net inventory adjustment in the period ending September 29, 2013 of $74

thousand.  The 2014 adjustment was primarily attributable to lost labor efficiencies and higher manufacturing overhead rates in costs of sales as compared to the estimated rates which resulted due from the lower than expected revenue and production volumes in 2014. The 2013 adjustment was primarily attributable to favorable cost of sales adjustment from improvements in estimated contract gross margins due to lower hours and manufacturing overhead spending as compared to previous projected rates. Inventory reserves for excess and obsolete inventory increased by $114 thousand over prior year reserve balances, primarily due to increases in excess inventory reserves on slow moving inventory associated with completed programs and as a result of decreased government spending on new replacement orders.

Warranty Costs: Some of Optex Systems Holdings’ customers require that the company warrant the quality of its products to meet customer requirements and be free of defects for up to fifteen months subsequent to delivery.   Future warranty costs are based on the estimated cost of replacement for expected returns based upon our most recent experience rate of defects as a percentage of warranty covered sales. Throughout the year, warranty costs are expensed as incurred, and as of each year end, Optex Systems Holdings reviews the prior 15 month warranty experience rate and may adjust the warranty accrual as required to cover any additional anticipated warranty costs related to prior shipments. As of September 28, 2014 and September 29, 2013, the existing warranty reserve balance of $25 thousand was reviewed and determined to be adequate to satisfy any future warranty claims that may have existed as of the end of each fiscal year for shipments occurring in the prior 15 months.

Property and Equipment:  Property and equipment are recorded at cost. Depreciation is computed using the straight line method over the estimated useful lives of the assets, ranging from three to seven years. Expenditures for renewals and betterments are capitalized.  Expenditures for minor items, repairs and maintenance are charged to operations as incurred. Gain or loss upon sale or retirement due to obsolescence is reflected in the operating results in the period the event takes place.

Impairment or Disposal of Long-Lived Assets: Optex Systems Holdings follows the provisions of FASB ASC 360-10, “ Accounting for the Impairment or Disposal of Long-lived Assets. ”  This standard requires, among other things, that long-lived assets be reviewed for potential impairment whenever events or circumstances indicate that the carrying amounts may not be recoverable. The assessment of possible impairment is based on the ability to recover the carrying value of the asset from the expected future pre-tax cash flows (undiscounted and without interest charges) of the related operations. If these expected cash flows are less than the carrying value of such asset, an impairment loss is recognized for the difference between estimated fair value and carrying value. The primary measure of fair value is based on discounted cash flows. The measurement of impairment requires management to make estimates of these cash flows related to long-lived assets, as well as other fair value determinations. The company recorded no impairment charges for the 2014 and 2013 fiscal years.

Revenue Recognition: Optex Systems Holdings recognizes revenue based on the modified percentage of completion method utilizing the units-of-delivery method, in accordance with FASB ASC 605-35:

The units-of-delivery method recognizes as revenue the contract price of units of a basic production product delivered during a period and as the cost of earned revenue the costs allocable to the delivered units. Costs allocable to undelivered units are reported in the balance sheet as inventory or work in progress. The method is used in circumstances in which an entity produces units of a basic product under production-type contracts in a continuous or sequential production process to buyers’ specifications.

Optex Systems Holdings contracts are fixed price production type contracts whereby a defined order quantity is delivered to the customer during a continuous or sequential production process tailored to the buyer’s specifications (build to print).  Optex Systems Holdings’ deliveries against these contracts generally occur in monthly increments across fixed delivery periods spanning from 3 to 36 months.

Optex Systems Holdings may at times have contracts that allow for invoicing based on achievement of milestone events. In such cases, Optex Systems Inc. recognizes revenue based on the milestone method in accordance with FASB ASC 605-28, as applicable. On October 24, 2011, Optex Systems, Inc. was awarded an $8.0 million contract with General Dynamics Land Systems - Canada that provided for milestone invoices up to a total of $3.9 million. Currently, there are no additional contracts providing for milestone payments. In accordance with FASB 605-28, Optex Systems, Inc. recognizes milestone payments as revenue upon completion of a substantive milestone as

commensurate with the following guidelines: our performance to achieve the milestone, the milestone relates solely to past performance and is reasonable relative to all of the deliverables and payment terms within the arrangement. Milestones are not considered as substantive if any portion of the associated milestone consideration relates to the remaining deliverables in the unit of accounting. Non-substantive milestone payments are reported as a liability on the balance sheet as Short Term and Long Term Customer Advance Deposits.

Pursuant to the contract, all substantive milestones were completed as of September 30, 2012 and as such, there was zero revenue recognized for milestones in the years ending September 28, 2014 and September 29, 2013. As of September 28, 2013 all of the milestone events were completed and there were no unpaid/invoiced customer deposits related to the completed milestone events.

Customer Advance Deposits: Customer advance deposits represent amounts collected from customers in advance of shipment or revenue recognition which relate to undelivered product due to non-substantive milestone payments or other cash in advance payment terms. As of September 28, 2014, Optex Systems, Inc. had a balance of $2.1 million in customer advance deposits related to non-substantive milestone billings. The terms of the contract extend through 2017 during which time we are required to purchase the necessary materials to fulfill the delivery of products required by the contract. Of the total collected customer advance deposits, $1.1 million related to short term customer advance deposits for deliveries to occur within the next twelve months and $1.0 million related long term customer advance deposits for deliveries occurring after September 2015.

Estimated Costs at Completion and Accrued Loss on Contracts:  Optex Systems Holdings reviews and reports on the performance of its contracts and production orders against the respective resource plans for such contracts/orders. These reviews are summarized in the form of estimates at completion. Estimates at completion include Optex Systems Holdings’ incurred costs to date against the contract/order plus management’s current estimates of remaining amounts for direct labor, material, other direct costs and subcontract support and indirect overhead costs based on the completion status and future contractual requirements for each order.

If an estimate at completion indicates a potential overrun against budgeted resources for a fixed price contract/order, management first attempts to implement lower cost solutions that will profitably meet the requirements of the fixed price contract. If such solutions do not appear practicable, management makes a determination whether to seek renegotiation of contract or order requirements from the customer. If neither cost reduction nor renegotiation appears probable, an accrual for the contract loss/overrun is recorded against earnings and the loss is recognized in the first period the loss is identified based on the most recent estimates at completion of the particular contract or product order. As of September 28, 2014 there was $11 thousand in contract loss reserves related to cost overruns incurred on a small contract scheduled to complete in October 2014. As of September 29, 2013 the contract loss reserves were zero.

During 2010, Optex Systems Holdings realized increased losses against the Howitzer programs of $1.1 million of which $0.8 million related specifically to production issues encountered on one of our Howitzer product lines.  Increased losses were primarily attributable to manufacturing issues on our U.S. government Howitzers culminating in higher material scrap and labor hours, combined with a reduction in total production volume in 2010 which further impacted production efficiencies across all product lines.  Optex Systems Holdings has requested an equitable adjustment on this program due to significant design issues impacting the manufacturability of the product.  As there is no guarantee that the request will be granted in part or in full, we realized the entire loss in fiscal year 2010. The requested equitable adjustment claim was formally rejected by the contracting agency on May 31, 2012; however, Optex Systems Holdings has appealed the decision with the Armed Services Board of Contract Appeals (ASBCA). While we remain optimistic that Optex has a justifiable claim, we cannot predict the outcome of the appeal will be successful. In November 2014, the ASBCA judge issued a decision in favor of Optex Systems Inc. against the government agency asserted position for a waiver of the claim. As of the date of this report issuance, we are awaiting a decision by the agency on their position in respect to the judge’s ruling for the next phase of the appeal process. In the event we are unsuccessful in obtaining an equitable adjustment settlement, there will be no future margin impact for on these programs as the losses have been previously recognized through the completion of the program.

Government Contracts:  Many of Optex Systems Holdings’ contracts are prime or subcontracted directly with the Federal government and as such, are subject to Federal Acquisition Regulation (Federal Acquisition Regulation) Subpart 49.5, “Contract Termination Clauses” and more specifically Federal Acquisition Regulation clauses 52.249-

2  “Termination for Convenience of the Government (Fixed-Price)”, and 49.504 “Termination of fixed-price contracts for default”.  These clauses are standard clauses on prime military contracts and are generally, “flowed down” to Optex Systems Holdings as subcontractors on other military business.  It has been Optex Systems Holdings’ experience that the termination for convenience is rarely invoked, except where it has been mutually beneficial for both parties.  Optex Systems Holdings is not currently aware of any pending terminations for convenience or default on its existing contracts.

In the event a termination for convenience were to occur, these Federal Acquisition Regulation  clause 52.249-2 provides for full recovery of all contractual costs and profits reasonably incurred up to and as a result of the terminated contract.  In the event a termination for default were to occur, Optex Systems Holdings could be liable for any excess cost incurred by the government to acquire supplies from another supplier similar to those terminated from Optex Systems Holdings.  Optex Systems Holdings would not be liable for any excess costs if the failure to perform the contract arises from causes beyond its control and without its fault or negligence as defined by Federal Acquisition Regulation clause 52.249-8.  In addition, the government may require Optex Systems Holdings to transfer title and deliver to the government any completed supplies, partially completed supplies and materials, parts, tools, dies, jigs, fixtures, plans, drawings, information, and contract rights that Optex Systems Holdings has specifically produced or acquired for the terminated portion of this contract.  The government shall pay contract price for completed supplies delivered and accepted, and Optex Systems Holdings and the government would negotiate an agreed upon amount of payment for manufacturing materials delivered and accepted and for the protection and preservation of the property. Failure to agree on an amount for manufacturing materials is subject to the Federal Acquisition Regulation Disputes clause 52.233-1.

In some cases, Optex Systems Holdings may receive orders subject to subsequent price negotiation on contracts exceeding the federal government simplified acquisition threshold of $700,000.  These “undefinitized” contracts are considered firm contracts but as Cost Accounting Standards Board covered contracts, they are subject to the Truth in Negotiations Act disclosure requirements and downward only price negotiation.  As of September 28, 2014 and September 29, 2013, Optex Systems had no booked orders that fell under this criterion.

Shipping and Handling Costs: All shipping and handling costs are included as a component of cost of goods sold.

Stock-Based Compensation: FASB ASC 718 establishes standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services, but primarily focuses on transactions whereby an entity obtains employee services for share-based payments. FASB ASC 718 requires that the compensation cost relating to share-based payment transactions be recognized in the financial statements. That cost will be measured based on the fair value of the equity or liability instruments issued. It also addresses transactions in which an entity incurs liabilities in exchange for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments.

Optex Systems Holdings’ accounting policy for equity instruments issued to consultants and vendors in exchange for goods and services follows the provisions of FASB ASC 505-50. The measurement date for the fair value of the equity instruments issued is determined at the earlier of (i) the date at which a commitment for performance by the consultant or vendor is reached or (ii) the date at which the consultant or vendor’s performance is complete. In the case of equity instruments issued to consultants, the fair value of the equity instrument is recognized over the term of the consulting agreement. Stock-based compensation related to non-employees is accounted for based on the fair value of the related stock or options or the fair value of the services, whichever is more readily determinable in accordance with FASB ASC 718.

Income Tax/Deferred Tax: FASB ASC 740 requires recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax assets and liabilities are determined based on differing treatment of items for financial reporting and income tax reporting purposes. The deferred tax balances are adjusted to reflect tax rates by tax jurisdiction, based on currently enacted tax laws, which will be in effect in the years in which the temporary differences are expected to reverse. Under FASB ASC 740, the effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. A valuation allowance is provided for certain deferred tax assets if it is more likely than not that Optex Systems Holdings will not realize tax

assets through future operations. When assessing the recoverability of deferred tax assets, management considers the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies. Based on those estimates, management has determined the balance of deferred tax assets will not be realized and has increased the valuation allowance reserves by $1.1 million during 2014. As of September 28, 2014 Optex Systems Inc. has a total deferred tax asset reserve of ($4.0) million against a total deferred tax asset of $4.0 million.

The difference between the income tax expense and pretax accounting income is primarily attributable the increase in the deferred tax asset valuation reserve of $1.1 million during the twelve months ended September 28, 2014.

Earnings per Share: Basic earnings per share is computed by dividing income available for common shareholders (the numerator) by the weighted average number of common shares outstanding (the denominator) for the period. Diluted earnings per share reflect the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock.

The potentially dilutive securities that Optex Systems Holdings has outstanding are convertible preferred stock, stock options and warrants. In computing the dilutive effect of convertible preferred stock, the numerator is adjusted to add back any convertible preferred dividends, and the denominator is increased to assume the conversion of the number of additional common shares. Optex Systems Holdings uses the Treasury Stock Method to compute the dilutive effect of stock options and warrants. Convertible preferred stock, stock options and warrants that are anti-dilutive are excluded from the calculation of diluted earnings per common share.

For the twelve months ended September 28, 2014, 1,001 shares of Series A preferred stock, 62,911,649 stock options and 1,000,000 warrants were excluded as anti-dilutive due to the net loss attributable to common shareholders during the year. For the twelve months ended September 29, 2013, 1,016 shares of Series A preferred stock, 48,247,649 stock options and 4,447,000 warrants were included as potentially dilutive.

Note 3 — Recent Accounting Pronouncements

In August 2014, FASB issued ASU 2014-15—Presentation of Financial Statements—Going Concern (ASC Subtopic 205-40): “Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern”. The update requires management to assess a company’s ability to continue as a going concern and to provide related footnote disclosures in certain circumstances. All entities are required to apply the new requirements in annual periods ending after December 15, 2016, and interim periods thereafter. Early application is permitted. As such, Optex Systems Holdings is required to adopt these provisions for the annual period ending October 1, 2017. Optex Systems Holdings is currently evaluating the impact of FASB ASU 2014-15 but does not expect the adoption thereof to have a material effect on Optex Systems Holdings’ financial statements.

In May 2014, FASB issued ASU 2014-09—Revenue from Contracts with Customers (Topic 606): “Section A—Summary and Amendments That Create Revenue from Contracts with Customers, (Topic 606) and Other Assets and Deferred Costs—Contracts with Customers (Subtopic 340-40), Section B—Conforming Amendments to Other Topics and Subtopics in the Codification and Status Tables, Section C—Background Information and Basis for Conclusions”. The guidance in this update affects any entity that enters into contracts with customers to transfer goods or services and supersedes the revenue recognition requirements in Topic 605, Revenue Recognition. The update is effective for annual reporting periods beginning after December 15, 2016, including interim periods within that reporting period. Early application is not permitted. As such, Optex Systems Holdings is required to adopt these provisions as of October 2, 2017, the beginning of the annual period ending September 30, 2018 and at the beginning of all interim periods ending after October 1, 2017. Optex Systems Holdings is currently evaluating the impact of FASB ASU 2014-09 but does not expect the adoption thereof to have a material effect on Optex Systems Holdings’ financial statements.

In July 2013, FASB issued ASU 2013-11—Income Taxes (ASC Topic 740): “Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists (a consensus of the FASB Emerging Issues Task Force)”. The amendments in this update provide explicit guidance on the financial statement presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists at the reporting date. The update is effective for fiscal years, and interim periods within those years, beginning after December 15, 2013. As such, Optex Systems Holdings has adopted these

provisions at the beginning of the interim period ending March 30, 2014. Adoption FASB ASU 2013-11 did not have a material effect on Optex Systems Holdings’ financial statements.

Note 4 — Property and Equipment

A summary of property and equipment at September 28, 2014 and September 29, 2013 is as follows:

Depreciation expense included in cost of goods sold and general and administrative expense for fiscal 2014 is $33 thousand and $47 thousand, respectively. Depreciation expense included in cost of goods sold and general and administrative expense for fiscal 2014 is $19 thousand and $50 thousand, respectively.

Note 5 — Accrued Expenses

The components of accrued liabilities for the years ended September 28, 2014 and September 29, 2013 are summarized below:

Note 6 — Commitments and Contingencies

Leases

Optex Systems Holdings leases its office and manufacturing facilities under a non-cancellable operating lease expiring March 31, 2021, in addition to maintaining several non-cancellable operating leases for office and manufacturing equipment.

On December 10, 2013 Optex Systems Holdings executed a lease amendment, renewing its Richardson, TX lease, effective as of December 10, 2013.  The terms of the office and manufacturing facilities lease are as follows:

Total expenses under the facility lease for the twelve months ended September 28, 2014 was $337 thousand and total expenses for manufacturing and office equipment was $20 thousand.  Total expenses under the facility lease agreements for the twelve months ended September 29, 2013 was $312 thousand and included $13 thousand related to a six month short term lease expiring in January, 2014. Total expenses for manufacturing and office equipment was $18 thousand.

As of September 28, 2014, the remaining minimum lease payments under the non-cancelable operating leases for equipment, office and facility space are as follows:

Pursuant to the terms of the recent amendment to the facilities lease, there was no base rent payment due from January 1, 2014 through March 31, 2014, and the total value of the rent abatement related to the lease amendment is $63.5 thousand. As of September 28, 2014 the unamortized deferred rent was $91 thousand as compared to $44 thousand as of September 29, 2013. Deferred rent expense is recognized at a rate of $1.2 thousand per month over the life of the lease. Commencing on April 1, 2014 the base rent payment is $21.2 thousand per month.

Note 7 — Transactions with a Related Party

There were no transactions with Related Parties during fiscal years 2014 or 2013 except as described below in Note 8 Debt Financing.

Note 8 — Debt Financing

Related Parties

Acquisition by Sileas Corporation on February 20, 2009

On February 20, 2009, Sileas purchased 100% of the equity and debt interest held by Longview, representing 90% of Optex Systems, Inc. (Delaware).  Currently, Sileas is the majority owner of Optex Systems Holdings.

Secured Promissory Note Due February 20, 2014/Longview Fund, LP

As a result of the transaction described above between Sileas and Longview Fund, LP on February 20, 2009, Sileas, currently majority owner of Optex Systems Holdings, executed and delivered to Longview, a Secured Promissory Note, originally due February 20, 2012 in the principal amount of $13.5 million. The note was extended on November 22, 2011 until February 20, 2014 in exchange for and extension fee of $270 thousand. On November 27, 2013, the Company was notified that Sileas Corp. and the Longview Fund, LP entered into an amendment to the Secured Promissory Note that extended the maturity date for an additional two year period ending on February 20, 2016. In exchange for the extension, Sileas Corp. agreed to pay the Longview Fund an extension fee equal to 2% of the principal amount of this Secured Note. As a result of the amendment, the principal amount of the Note was increased by $275 thousand to $14.1 million as of November 27, 2013, 2013.   The note balance as of September 28, 2014 was $17.5 million inclusive of accrued and unpaid interest of $3.4 million.

The Note bears simple interest at the rate of 4% per annum, and the interest rate upon an event of default increases to 10% per annum. The obligations of Sileas under the note are secured by a security interest in Optex Systems Holdings’ common and preferred stock owned by Sileas. Optex Systems Holdings has not guaranteed the note and Longview is not entitled to pursue Optex Systems Holdings in the event of a default by Sileas. Therefore, there are no actual or potential cash flow commitments from Optex Systems Holdings. In the event of default by Sileas on its obligations under the note, Longview would only be entitled to receive the Optex Systems Holdings common and preferred stock held by Sileas.

Credit Facility — Avidbank (formerly known as Peninsula Bank Business Funding)

In April 2012, the Company amended its revolving credit facility with Avidbank. The renewable revolving maturity date was July 15, 2014. On May 22, 2014, the Company amended its revolving credit facility with Avidbank. The new renewable revolving maturity date is May 21, 2016. The facility provides up to $1 million in financing against eligible receivables and subject to meeting certain covenants including an asset coverage ratio test for up to two years. The material terms of the amended revolving credit facility are as follows:

As of September 28, 2014, the outstanding balance on the line of credit was $0.  For the years ended September 28, 2014 and September 29, 2013, the total interest expense against the outstanding line of credit balance was $21 thousand and $42 thousand, respectively. During the twelve months ended September 28, 2014, Optex Systems Holdings separately recognized $13 thousand in interest income related to financing fees on a foreign sale. There was zero in interest income for the twelve months ended September 29, 2013.

Note 10 — Stock Based Compensation

On March 26, 2009, the Board of Directors adopted the 2009 Stock Option Plan providing for the issuance of up to 6,000,000 shares to Optex Systems Holdings officers, directors, employees and to independent contractors who provide services to Optex Systems Holdings.

Options granted under the 2009 Stock Option Plan vest as determined by the Board of Directors of Optex Systems Holdings or a committee set up to act as a compensation committee of the Board of Directors and terminate after the earliest of the following events: (i) expiration of the option as provided in the option agreement, (ii) 90 days following the date of termination of the employee, or (iii) ten years from the date of grant (five years from the date of grant for incentive options granted to an employee who owns more than 10% of the total combined voting power of all classes of Optex Systems Holdings stock at the date of grant).  In some instances, granted stock options are immediately exercisable into restricted shares of common stock, which vest in accordance with the original terms of the related options. Optex Systems Holdings recognizes compensation expense ratably over the requisite service period.

The option price of each share of common stock is determined by the Board of Directors or a committee set up to act as a compensation committee, provided that with respect to incentive stock options, the option price per share will in all cases be equal to or greater than 100% of the fair value of a share of common stock on the date of the grant, except an incentive option granted under the 2009 Stock Option Plan to a shareholder that owns more than 10% of the total combined voting power of all classes of Optex Systems Holdings’ stock, will have an exercise price of not

less than 110% of the fair value of a share of common stock on the date of grant. No participant may be granted incentive stock options, which would result in shares with an aggregate fair value of more than $100,000 first becoming exercisable in one calendar year.

Optex Systems Holdings adopted its 2009 Stock Option Plan on March 26, 2009.  On December 9, 2011, Optex Systems Holdings Board of Directors authorized an amendment to its Stock Option Plan to increase the number of issuable shares from 6,000,000 to 50,000,000 and authorized the grant of 10,000,000 options in the aggregate to two board members and a total of 36,070,000 to Optex Systems Holdings employees including 20,000,000 options to executive officers, at an exercise price of $0.01per share with each grant to vest 25% per year over four years for each year with which the grantee is still employed by or serving as a director of Optex Systems Holdings (with all unvested options automatically expiring on the date of termination of employment by or service as a director of Optex Systems Holdings) and all unvested options immediately vesting upon a change of control due to a merger or acquisition of Optex Systems Holdings, with the options to be issued within 60 days of December 9, 2011. For shares granted as of December 9, 2011, Optex Systems Holdings anticipates an annualized employee turnover rate of 3% per year, and as such anticipates that only 42,716,864 of the 46,070,000 shares will vest as of the end of the contract term.

On December 19, 2013, the Board of Directors of Optex Systems Holdings, Inc. authorized an amendment to its Stock Option Plan to increase the number of issuable shares from 50,000,000 to 75,000,000 and authorized the grant of 20,000,000 options to three board members and a grant of 5,000,000 to an Optex Systems Holdings officer. The options have an exercise price of $0.01 per share with each grant to vest 25% per year over four years for each year with which the grantee is still employed by or serving as a director of Optex Systems Holdings, Inc. (with all unvested options automatically expiring on the date of termination of employment by or service as a director of Optex Systems Holdings, Inc.) and all unvested options immediately vesting upon a change of control due to a merger or acquisition of the Company.

As of September 28, 2014, 25,201,649 of awarded stock options had vested, 5,000,000 of those options had been exercised and 5,840,000 options had been forfeited due to employee turnover. Vested and exercisable stock options as of September 28, 2014 were 20,201,649. As of September 29, 2013, 17,700,149 of awarded stock options were vested and exercisable, and 504,000 shares had been forfeited due to employee turnover. There had been no options exercised as of September 29, 2013.

Optex Systems Holdings recorded compensation costs for options and shares granted under the plan amounting to $105 thousand and $128 thousand for the fiscal years ended September 28, 2014 and September 29, 2013, respectively and was charged as general and administrative compensation expense for each of the respective fiscal years. A deduction is not allowed for income tax purposes until nonqualified options are exercised. The amount of this deduction will be the difference between the fair value of Optex Systems Holdings’ common stock and the exercise price at the date of exercise. For the year ended September 28, 2014, estimated deferred tax assets related to option compensation costs were $36 thousand and have been recorded for the tax effect of the financial statement expense.  For the year ended September 29, 2013 the estimated deferred tax assets related to option compensation costs were $43 thousand and have been recorded for the tax effect of the financial statement expense.  No tax deduction is allowed for incentive stock options. Accordingly no deferred tax asset is recorded for GAAP expense related to these options.

Optex Systems Holdings records its stock based compensation expense in accordance with ASC 718-10, “Compensation — Stock Compensation”. In estimating the value of stock options issued, management has valued the options at their date of grant utilizing the Black-Scholes-Merton option pricing model.  For options issued on December 19, 2013, the fair value of the underlying shares was determined based on the closing price of Optex Systems Holdings’ publicly-traded shares as of December 19, 2013.  Further, Optex Systems Holdings used an expected volatility of 354.4% which was calculated using the historical Optex Systems Holdings stock prices over the prior 36 month trading period. Estimation of these equity instruments’ fair value is affected by our stock price, as well as assumptions regarding subjective and complex variables such as employee exercise behavior and our expected stock price volatility over the term of the award. As our assumptions are based on historical information, judgment is required to determine if historical trends are fair indicators of future outcomes.

The risk-free interest rates used of 1.1% to 2.3% were determined based on the implied yield available on U.S. Treasury issues with an equivalent term approximating the expected life of the options of 4.5 to 7 years depending on the date of the grant and expected life of the options.  The expected life of options used was based on the contractual life of the option grant.  Optex Systems Holdings determined the expected dividend rate based on the assumption and expectation that earnings generated from operations are not expected to be adequate to allow for the payment of dividends in the near future and the assumption that Optex Systems Holdings does not presently have any intention of paying cash dividends on its common stock.

Optex Systems Holdings has granted stock options to officers and employees as follows:

The following table summarizes the status of Optex Systems Holdings’ aggregate stock options granted under the incentive stock option plan: