PURE BIOSCIENCE, INC. - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended July 31, 2021

or

For the transition period from ________ to ________

Commission file No. 001-14468

PURE Bioscience, Inc.

(Exact name of registrant as specified in charter)

9669 Hermosa Avenue

Rancho Cucamonga, California 91730

(Address of principal executive office, including zip code)

(619) 596-8600

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

None

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.01 par value

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the registrant’s voting stock held by non-affiliates, as of the last business day of the registrant’s second quarter, was approximately $41,400,000 (computed on the basis of the closing price of the common stock on the OTCQB Bulletin Board on January 31, 2021). For purposes of this computation only, all executive officers, directors and 10% or greater stockholders have been deemed affiliates.

As of October 28, 2021, there were 87,223,141 shares of the registrant’s common stock, $0.01 par value per share, outstanding.

Other Information

As used in this Annual Report on Form 10-K, the terms “we,” “us,” “our,” “PURE” and the “Company” refer to PURE Bioscience, Inc., a Delaware corporation, and its subsidiary, on a consolidated basis, unless otherwise stated.

TABLE OF CONTENTS

CAUTIONARY STATEMENT REGARDING FORWARD LOOKING STATEMENTS

Certain statements in this Annual Report on Form 10-K may constitute “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, or the Exchange Act. Forward-looking statements are based upon our current assumptions, expectations and beliefs concerning future developments and their potential effect on our business. In some cases, you can identify forward-looking statements by words such as “if,” “shall,” “may,” “might,” “will likely result,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “project,” “intend,” “goal,” “objective,” “predict,” “potential” or “continue,” or the negative of these terms and other comparable terminology, although the absence of these words does not necessarily mean that a statement is not forward-looking. Additionally, statements concerning future matters such as our business strategy, development of new products, regulatory approvals, sales levels, expense levels, cash flows, future commercial and financing matters, future partnering opportunities and other statements regarding matters that are not historical are forward-looking statements.

Although the forward-looking statements in this Annual Report reflect our good faith judgment, based on currently available information, they involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance, or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by these forward-looking statements. Factors that might cause or contribute to such differences include, but are not limited to, those discussed in the “Risk Factors” contained in Part I, Item 1A of this Annual Report. As a result of these factors, we cannot assure you that the forward-looking statements in this Annual Report on Form 10-K will prove to be accurate, and you are cautioned not to place undue reliance on any forward-looking statements. Except as required by law, we undertake no obligation to update publicly any forward-looking statements for any reason after the date we file this Annual Report with the Securities and Exchange Commission, or to conform these statements to actual results or to changes in our expectations. You should, however, review the factors and risks we describe in the reports we will file from time to time with the Securities and Exchange Commission after the date we file this Annual Report. Readers are urged to carefully review and consider the various disclosures made in this Annual Report.

Summary of Material Risks Associated with Our Business

Our business is subject to a number of risks that if realized could materially affect our business, prospects, operating results and financial condition. These risks are discussed more fully in the “Risk Factors” section of this Quarterly Report on Form 10-K. These risks include the following:

PART I

Item 1. Business

Overview

We are focused on developing and commercializing proprietary antimicrobial products that provide safe and cost-effective solutions to the health and environmental challenges of pathogen and hygienic control. Our technology platform is based on patented stabilized ionic silver, and our initial products contain silver dihydrogen citrate, or SDC. SDC is a broad-spectrum, non-toxic antimicrobial agent, which offers 24-hour residual protection and formulates well with other compounds. As a platform technology, we believe SDC is distinguished from existing products in the marketplace because of its superior efficacy, reduced toxicity, non-causticity and the inability of bacteria to form a resistance to it.

We believe there is a significant market opportunity for our safe, non-toxic, non-caustic and effective SDC-based solutions. We currently offer PURE^® Hard Surface as a food contact surface sanitizer and disinfectant to restaurant chains, food processors and food transportation companies. We also offer PURE Control^® as a direct food contact processing aid. In addition to our direct sales efforts with PURE Hard Surface and PURE Control, we market and sell our SDC-based products indirectly through third-party distributors supporting various industries.

Technology Platform

The foundation of our technology platform is a proprietary electrochemical process that allows us to generate ionized silver in the presence of organic acid. This process creates a solution containing stabilized ionic silver that can function as an antimicrobial. Our current products all contain SDC, which we produce by ionizing silver in citric acid. SDC is a natural, non-toxic, non-caustic, colorless, odorless antimicrobial agent, which offers 24-hour residual protection, and that formulates well with other compounds. We have also produced ionic silver-based molecular entities using other organic acids, and we believe these compounds may provide a platform for future product development.

Silver as an Antimicrobial

The use of silver as an antimicrobial dates back to ancient times when water, wine and other beverages were kept in silver vessels to maintain freshness. Ancient Egyptians applied thin strips of beaten silver around wounds to avoid infection, and early royalty ate from silver plates and with silver utensils to stay healthy. In the past half-century, silver in colloidal and ionic forms has been used successfully in a wide array of antimicrobial applications, including water purification and topical treatments for burn victims. Silver must be in an ionic form to be effective at killing microorganisms. The short shelf-life of previous ionic silver solutions has limited the development of ionic-silver based antimicrobials. SDC, as a stabilized silver ion complex, has a shelf life of more than a decade because the weak bond of the silver ion to the citric acid allows the ion to remain stable in solution while at the same time making it bioavailable for antimicrobial action.

Mechanisms of Action

The rapid and broad-spectrum efficacy of SDC is attributed to its dual mechanisms of action, both with respect to killing bacteria and other microorganisms and acting against viruses. SDC can kill microorganisms at both the extracellular and intracellular levels. SDC attracts bacteria because the citric acid is recognized by the organism as a food source. SDC easily enters the microorganism through membrane transport proteins. Once inside the organism, SDC binds to DNA and intracellular proteins causing irreversible damage to the DNA and protein structure. Metabolic and reproductive functions halt, and the organism dies. SDC can also act on an organism’s outer membrane. Silver ions are highly attracted to sulfur-containing thiol groups found in metabolic and structural proteins bound to the membrane surface. SDC targets these critical proteins and destroys their structure. This disruption of the organism’s membrane function and integrity leads to its death.

Viruses are much smaller than bacteria and present fewer target sites on which a biocide can act. The efficacy of SDC against enveloped and non-enveloped viruses comes from its ability to destroy not only the viral envelope, preventing the virus from attaching to a host cell, but also the infectious component of the virus, the nucleic acid.

Safety Profile

Research has shown that silver is an effective antimicrobial and not toxic to humans at the residual levels following the use of our SDC-based products. In addition, our data shows the components of SDC, ionic silver and citric acid, to be non-toxic, particularly at the low concentrations required to eliminate microorganisms. At higher concentrations, citric acid can be an eye irritant. We have tested a concentrated SDC formulation using standard protocols to measure acute toxicity. Acute oral and dermal toxicity was not observed at doses up to and including 5000 mg/kg. Data from eye and skin studies showed only slight irritation and no dermal sensitization.

GRAS Status as Contact Biocide

A committee of independent experts critically reviewed efficacy and toxicity data for SDC and the SDC-based PURE Hard Surface disinfectant and food contact surface sanitizer. The committee found no evidence that SDC demonstrates a hazard to the public when used as a contact biocide on food contact surfaces and food-use utensils. The committee, therefore, concluded such use to be generally recognized as safe, consistent with the EPA registration (discussed below), allowing for use on food manufacturing and processing equipment and food preparation surfaces.

Efficacy

Formulations containing SDC provide complete, quick and broad-spectrum antimicrobial efficacy against gram positive and gram negative bacteria, enveloped and non-enveloped viruses, and fungi. In addition to quick kill times, SDC provides residual antimicrobial activity. SDC also provides rapid kill times against multiple drug resistant bacteria, including Methicillin-resistant Staphylococcus aureus, or MRSA, Vancomycin resistant Enterococcus faecium, or VRE, Carbapenem resistant Escherichia coli, Carbapenem resistant Klebsiella pneumoniae and Carbapenem resistant Klebsiella pneumoniae, NDM-1+. See “EPA Registrations” below for more detailed efficacy data.

Natural and Environmentally Responsible

SDC is made of simple and all-natural ingredients: water, citric acid and minute amounts of ionic silver. SDC does not present a threat to the environment. If introduced to water systems, the low concentrations of ionic silver in SDC would react with naturally present substances such as chlorides, sulfides and organic matter. These reactions would create insoluble silver complexes and render the silver inert. In addition, we manufacture SDC through a “zero waste” process in which no byproducts or environmental effluent are created.

Market Opportunity

U.S. Incidence and Cost of Foodborne Illness

According to an Ohio State University study published in the Journal of Food Protection, completed by Dr. Scharff, a consumer science professor, foodborne illness poses a $77.7 billion economic burden in the United States annually. This cost estimate includes health related costs, associated medical costs, productivity losses, mortality, and pain and suffering. The study noted that excluding the estimated costs for pain and suffering, health related costs exceeded $51 billion. The study does not include costs to the food industry, including reduced consumer confidence, reduced brand value, product recall costs, and litigation, nor does it include the cost to public health agencies (local, state and federal) that are required to respond to illnesses and outbreaks. In addition, the study cited Salmonella as the most costly pathogen with an economic burden estimated to be in excess of $11 billion. This is primarily due to its high incidence and mortality rate.

Limitations of Existing Food Safety Solutions

The U.S. food industry continues to rely on the use of toxic chemicals as processing aids or interventions during food processing operations for which pathogens are becoming increasingly resistant and rendering current interventions less efficacious. Most of these chemicals carry various warning labels for their toxic and/or caustic characteristics, which can negatively affect the safety of processing plant personnel, plant operating equipment and the plant environment and its surroundings.

Among the chemicals in current use are: peracetic acid, acidified sodium chlorite (ASC), ozone, trisodium phosphate, cetylpyridinium chloride (CPC), organic acid rinses (lactic acid), hypobromous acid and chlorine dioxide. Some of these chemicals can be difficult to work with as a processing aid as they require heating to become effective or are difficult to mix and stabilize prior to use. Additionally, some of these chemicals damage the food being processed, resulting in decreased yields. Further, the use of certain of these chemicals is limited to treating only specific pathogens and/or only certain foods. In addition, some of these chemicals can produce noxious fumes that over time have been linked to upper respiratory illness and typically require in-plant decontamination of their effluence.

Several large and established corporations currently supply these chemicals. They may also provide other related food safety services such as environmental sanitation programs and food safety consultation and audit services.

Our SDC-Based Products as a Food Safety Solution

Based on the limitations of the existing food safety solutions, we believe that our SDC-based products, including PURE Hard Surface and PURE Control, are well positioned as new and disruptive solutions for the food safety industry. Given their broad spectrum antimicrobial efficacy and non-toxic properties, our SDC-based products provide significant improvements over current chemical interventions that can both strengthen our customers’ food safety practices and help them control and eliminate pathogens present during their food processing operations.

Our SDC-based products can provide users with the following benefits compared to the current processing chemicals they are using:

Based on their performance and characteristics, we believe our SDC-based products can provide our customers with significant advantages to the chemical interventions they are currently using and help them achieve their goal of improving the safety of processed foods they offer to consumers.

Business Strategy

Our goal is to become a sustainable company by commercializing the SDC-based products we have developed with our proprietary technology platform. We are focused on delivering leading antimicrobial products that address food safety risks across the food industry supply chain. Key aspects of our business strategy include:

In addition to our current products addressing food safety, we intend to leverage our technology platform through licensing and distribution collaborations in order to develop new products and enter into new markets that could potentially generate multiple sources of revenue.

Our Products

In addition to PURE Hard Surface and PURE Control, we manufacture and sell (i) SDC-based products for end use, (ii) products preserved with SDC and (iii) SDC as a raw material ingredient for manufacturing use. Our current products are as follows:

PURE® Hard Surface Disinfectant and Sanitizer (Ready to Use)

PURE Hard Surface is our SDC-based, patented and EPA-registered, ready-to-use hard surface disinfectant and food contact surface sanitizer. PURE Hard Surface combines high efficacy and low toxicity with bacterial and viral kill times in as few as 30-seconds and 24-hour residual protection. The product kills resistant pathogens such as MRSA and Carbapenem-resistant Klebsiella pneumoniae (NDM-1), and effectively eliminates dangerous fungi and viruses including HIV, Hepatitis B, Hepatitis C, Norovirus, Influenza A, Avian Influenza and H1N1. It also eradicates hazardous food pathogens such as E. coli, Salmonella, Campylobacter and Listeria. PURE Hard Surface delivers broad-spectrum efficacy yet remains classified as least-toxic by the EPA. The active ingredient, SDC, has been designated as “Generally Recognized as Safe,” or GRAS, for use on food processing equipment, machinery and utensils.

PURE Control^®

We have the necessary regulatory approvals from the FDA to offer PURE Control as a direct food contact processing aid for fresh produce and raw poultry. We also have regulatory approvals from the USDA for certain methods of application of PURE Control on poultry. Additionally, subject to the results of our focused in-plant validation efforts for our approved produce and poultry solutions, we intend to seek approval to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork.

Poultry Processing Aid. In May 2017, we received the required approvals from the FDA stating that our food contact notification for SDC as a raw poultry processing aid is complete. We received a “No Objection Letter” from the USDA’s Food Safety and Inspection Service (FSIS) granting approval for the higher concentrations of SDC-based PURE Control to be used as a spray or dip applied to poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing of fresh poultry.

Produce Processing Aid. In January 2016, we received the required approvals from the FDA stating that our FCN for SDC as a spray or dip on processed fruits and vegetables is complete. We were not required to obtain any approvals from the USDA to market PURE Control as a produce processing aid.

Other Processing Aids under Development. Subject to the results of our focused in-plant validation efforts for our approved produce and poultry solutions, we intend to seek approval to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork. In addition, we may identify other food processing opportunities for SDC.

Additional SDC-Based Products

In addition to PURE Hard Surface and PURE Control, we manufacture and sell (i) SDC-based products for end use, (ii) products preserved with SDC and (iii) SDC as a raw material ingredient for manufacturing use. These products include:

PURE Complete Solution

Our PURE Complete Solution is comprised of PURE Hard Surface and concentrated cleaning products that were launched as companion products to PURE Hard Surface. The PURE Complete Solution offers a comprehensive, cost-effective and user-friendly cleaning, disinfecting and sanitizing product line to end-users including our targeted foodservice, food manufacturing and food processing customers. We can also target this product line to hospital and medical care facilities, janitorial service providers and the distributors that supply them.

PURE^® Multi-Purpose and Floor Cleaner Concentrate (End-User Dilutable)

PURE Multi-Purpose Cleaner is an environmentally responsible cleaning product that is protected by SDC. SDC ensures the quality and safety of PURE Multi-Purpose and Floor Cleaner without human or environmental exposure to toxic chemical preservatives. PURE Multi-Purpose and Floor Cleaner is non-toxic and non-flammable and contains no EDTA, phosphates, ammonia or bleach as well as no VOCs or NPEs. This efficient cleaner provides professional strength cleaning in a concentrate formula that yields a 1:96 – 1:256 use dilution that is safe for use on all resilient surfaces, including floors, glass and food contact surfaces.

PURE^® Multi-Purpose Hi-Foam Cleaner Concentrate (End-User Dilutable)

PURE Multi-Purpose Hi-Foam Cleaner is an environmentally responsible, professional strength high foam forming cleaning product that is protected by SDC. SDC ensures the quality and safety of PURE Multi-Purpose Hi-Foam Cleaner without human or environmental exposure to toxic chemical preservatives. PURE Multi-Purpose Hi-Foam Cleaner is non-toxic and non-flammable and contains no EDTA, phosphates, ammonia or bleach as well as no VOCs or NPEs. PURE Multi-Purpose Hi-Foam Cleaner provides high foam cleaning in a concentrate formula that yields a 1:50 use dilution that is safe for use on stainless steel equipment, resilient floors, walls and painted surfaces.

Axen^® 30 (Ready-to-Use)

Axen30 is our patented and EPA-registered hard surface disinfectant and is a predecessor ready-to-use product to PURE Hard Surface. Axen30 is currently sold on a limited basis by distributors under their respective private labels.

Axenohl^® (Raw Material Ingredient)

Axenohl is our patented and EPA-registered SDC-based antimicrobial formulation for use as a raw material ingredient in the manufacturing of EPA-registered products. Axenohl is a colorless, odorless and stable solution that provides fast acting efficacy against bacteria, viruses and fungi when manufactured into consumer and commercial disinfecting and sanitizing products. Axenohl is currently sold on a limited basis to distributors who manufacture their own respective end-use products.

SILVÉRION^® (Raw Material Ingredient)

SILVÉRION is our patented SDC-based antimicrobial formulation for use as a raw material ingredient in the manufacturing of personal care products. It can be used as either an active ingredient or a preservative. SILVÉRION is a colorless, odorless and stable solution that provides ionic silver in a water-soluble form. It provides fast acting efficacy at low concentrations against a broad-spectrum of bacteria, viruses, yeast and molds. SILVÉRION is currently sold domestically and outside of the United States in various personal care products.

EPA Registrations

We sell our EPA-regulated products under the following three EPA registrations: (i) SDC3A, our hard surface disinfectant and food contact surface sanitizer, (ii) Axen30, our hard surface disinfectant, and (iii) Axenohl, our antimicrobial formulation for use as a raw material in the manufacturing of EPA-registered products.

PURE Hard Surface SDC3A Registration

The EPA registration for SDC3A, marketed as PURE Hard Surface, our disinfectant and food contact surface sanitizer, includes the following efficacy claims:

Toxicity Categories

The EPA categorizes the toxicity of antimicrobial products from Category I to Category IV. The following table shows the EPA toxicity categories and required signal words.

SDC3A is a Category IV product for which no signal words are required.

Axen30 Registration

Axen30 is a hard surface disinfectant and is a predecessor product to SDC3A. It offers similar broad-spectrum efficacy but longer kill times. Axen30 is not approved for use on food contact surfaces. Axen30 is currently sold on a limited basis by distributors under their respective private labels.

Axenohl Registration

Axenohl is registered as a raw material ingredient for the manufacturing of EPA-registered products and as such does not carry specific efficacy claims. Axenohl is sold to distributors who manufacture their own respective end-use products.

Intellectual Property

Our policy is to pursue patents and trademarks, maintain trade secrets and use other means to protect our technology, inventions and improvements that are commercially important to the development of our business.

We have applied for U.S. and foreign patent protection for our SDC technology. Currently, we own twelve U.S. issued patents. Approximately thirty patents have been issued outside of the U.S., and we own approximately four patents pending around the world. The expiration dates for our twelve U.S. issued patents begin in 2018 and end in 2030. In September 2013, we decided to abandon pending and issued patents in non-strategic international territories. We intend to focus our future patent prosecution and defense efforts primarily to North America, Europe, Asia and Mexico.

Additional patent applications may not be granted, or, if granted, may not provide adequate protection to us. We also intend to rely on whatever protection the law affords to trade secrets, including unpatented know-how. Other companies, however, may independently develop equivalent or superior technologies or processes and may obtain patents or similar rights with respect thereto.

Although we believe that we have developed our technology independently and have not infringed, and do not infringe, on the patents of others, third parties may make claims that our technology does infringe on their patents or other intellectual property. In the event of infringement, we may, under certain circumstances, be required to modify our infringing product or process or obtain a license. We may not be able to do either of those things in a timely manner if at all, and failure to do so could have a material adverse effect on our business. In addition, we may not have the financial or other resources necessary to enforce a patent infringement or proprietary rights violation action or to defend ourselves against such actions brought by others. If any of the products we develop infringe upon the patent or proprietary rights of others, we could, under certain circumstances, be enjoined or become liable for damages, which would have a material adverse effect on our business.

We also rely on confidentiality and nondisclosure agreements with our employees, customers, consultants, advisors, licensees and potential partners to protect our technology, intellectual property and other proprietary property. Pursuant to the foregoing and for other reasons, we face the risk that our competitors may acquire information which we consider to be proprietary, that such parties may breach such agreements or that such agreements will be inadequate or unenforceable.

Further, we own the registered trademarks or pending trademark applications for PURE Bioscience^®, Powered by SDC Ag+^®, PURE^®, Axenohl^®, Axen^®, SILVÉRION^®, and PURE Control^®. In addition, we have applications for other trademarks pending around the world, which may or may not be granted. We previously allowed the marks Kinderguard^®, Cruise Control^®, Staphacide^® , Nutripure^®, Elderguard^®, and Critterguard^® to go abandoned, as they were no longer in line with our food safety business strategy.

Research and Development

We recognize the importance of innovation to our business strategy and long-term success. A key aspect of our business strategy is to leverage our technology platform to develop additional proprietary products and applications, including end use products and raw material formulations derived from our technology platform. We conduct our primary research and development activities in-house and use third-party laboratories to conduct independent testing. We also engage development partners to perform research and development activities at their own expense for specific products and processes using SDC.

Sales and Marketing

A critical aspect of our business strategy is to leverage the industry experience of our internal sales force, the members of our Board of Directors and our management team in order to maximize the commercial potential of our technology platform in the food industry.

According to the CDC, FDA and other food industry sources, food contamination and food borne illnesses have been increasing. We believe our focus on food safety is addressing a significant need to provide safe, non-toxic and effective solutions to mitigate the increase of food contamination and food borne illnesses. We believe our products can be used effectively to prevent or mitigate the risk of food contaminants in various stages of the food supply chain. Our current sales and marketing efforts include demonstrating our SDC products’ effectiveness as a hard surface disinfectant and sanitizer for:

Our sales team is actively developing customer relationships with certain segments of foodservice operators, food processors, food manufacturers and food transportation companies. Due to the recent introduction of our food safety products and the importance of food safety to our customers, the sales cycle to secure a new customer is long and unpredictable. We have recently completed and are currently conducting numerous product evaluation trials and comparative testing of our SDC-based products with prospective customers, which we believe will result in future revenue. We believe our products provide superior pathogen and hygiene control performance characteristics as compared with legacy chemical products, which also have higher toxicity profiles than our SDC-based products.

In addition to our direct sales and marketing efforts, we intend to selectively form partnerships with industry leaders for a variety of uses and applications of our products and technology. These partnerships may be for both U.S. and international markets where we believe we may leverage the product development, sales and marketing resources of business partners to commercialize our SDC technology in their respective markets.

Sales Concentration

Net product sales were $3,698,000 and $6,917,000 for the years ended July 31, 2021 and 2020, respectively. For the year ended July 31, 2021, one individual customer accounted for 11% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 100% U.S. For the year ended July 31, 2020, three individual customers accounted for 16%, 13% and 11% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 98% U.S. and 2% foreign.

From time to time, one or a small number of our customers may represent a significant percentage of our revenue. Our largest customer accounted for 11% of our revenue for the fiscal year ended July 31, 2021. Although we have agreements with many of our customers, these agreements typically do not prohibit customers from purchasing products and services from competitors. A decision by any of our major customers to significantly reduce the amount of product ordered or license fees paid, or their failure or inability to pay amounts owed to us in a timely manner, or at all, could have a significant adverse effect on our business.

Competition

The markets for our SDC-based products and each of their potential applications are highly competitive. We have a number of competitors that vary in size, scope and breadth of products offered. These competitors include some of the largest global corporations, and most of our competitors have significantly greater financial resources than we do and offer multiple service and product offerings as well as consulting services to their customers. We expect to face additional competition from other competitors and technologies in the future.

Because SDC is a new antimicrobial technology to the food industry, our success will depend, in part, upon our ability to achieve a share of our target markets at the expense of established and future products. Even where SDC may have technological competitive advantages over competing products, we, our partners, or our distributors, will need to invest significant resources in order to attempt to displace traditional technologies sold by, what are in many cases, well-known industry leaders.

Our SDC-based products (especially at higher silver ion concentration levels) are typically more expensive to produce than existing treatment chemicals, and as a result, customers may not purchase our products for cost reasons, even if we are successful in demonstrating the superior efficacy our products. Further, customers may determine that the other benefits offered by our products (e.g., non-toxic, non-caustic, and neutral to positive yield impact) are not sufficient to overcome the lower cost products offered by our competitors.

Manufacturing

Effective June 9, 2019, we entered into a five-year manufacturing supply agreement with Intercon Chemical Company (ICC) with a three-year renewal term option (the “Manufacturing Supply Agreement”). The agreement consists of manufacturing, packaging, and distribution of PURE’s SDC-based products. The Manufacturing Supply Agreement provides:

The Manufacturing Supply Agreement may be terminated by mutual written consent, or by either party upon the material breach of the terms of the agreement by the other party.

Silver is the primary active ingredient in SDC and is a readily available commodity. The other active and inactive ingredients in our products are readily available from multiple sources.

Government Regulation

Our business is subject to various government regulations relating to the protection of public health and the environment. Among these are laws that regulate the manufacture, storage, distribution and labeling of our products, as well as the use, handling, storage and disposal of certain materials in the manufacturing of our products.

Regulation in the United States

Certain environmental and regulatory matters significant to us are discussed below.

Requirements Imposed by the EPA and Similar State Agencies

We manufacture and sell in the U.S. certain disinfecting products that kill or reduce microorganisms (bacteria, viruses, fungi). The manufacture, labeling, handling and use of these products are regulated by the EPA under the Federal Insecticide, Fungicide, and Rodenticide Act, or FIFRA. We currently sell three products registered by the EPA under FIFRA, certain of which are approved for use on food contact surfaces and others of which are approved for use on non-food contact hard surfaces. EPA product registration requires meeting certain efficacy, toxicity and labeling requirements and paying ongoing registration fees.

Although states do not generally impose substantive requirements different from those of the EPA, each state in which our products are sold requires registration and payment of a fee. California and certain other states have adopted additional regulatory programs applicable to these types of products that, in some cases, impose a fee on total product sales in the state.

Based on our experience and our knowledge of current trends, we expect the costs and delays in receiving necessary federal and state approvals for these types of products may increase in the coming years.

Requirements Imposed by Ingredient Legislation

Numerous federal, state and local laws regulate the sale of products containing certain identified ingredients that may impact human health and the environment. For instance, California has enacted Proposition 65, which requires the disclosure of specified listed ingredient chemicals on the labels of products. Although none of the ingredients in our current products is reportable under Proposition 65, this and other similar legislation may become more comprehensive in the future and/or new products we may develop could be subject to these regulations.

Requirements Imposed by Other Environmental Laws

A number of federal, state and local environmental, health and safety laws govern the use, handling, storage and disposal of certain materials. Our current manufacturing process for SDC-based products is a “zero waste” process, meaning that no byproducts are created, and we do not use hazardous materials, as defined by applicable environmental laws, in the manufacturing of these products. As such, some of these U.S. environmental laws are not generally applicable to us in their current form. However, these laws may in the future identify as hazardous materials certain materials that we use in our manufacturing processes, or we may opt to or be forced to change our manufacturing procedures in a way that subjects our products or operations to these laws.

Requirements Imposed by the FDA and USDA

Various laws and regulations have been enacted by federal, state, local and foreign jurisdictions regulating certain products we anticipate manufacturing and selling for controlling microbial growth in or on foods. In the United States, these requirements generally are administered by the FDA. However, the U.S. Department of Agriculture and EPA also may share in regulatory jurisdiction of antimicrobials applied directly to food as it pertains to poultry and meats.

Regulation Outside the United States

The commercialization of SDC-based products in countries other than the U.S. may require that we, or companies with whom we partner for such foreign commercialization, obtain necessary approvals from foreign regulatory authorities comparable to the EPA and USDA, among others. Applicable approval processes and ongoing requirements vary from country to country and may involve more time and expense than that required to obtain approvals in the U.S. In international markets, we currently sell our products under active registrations held by us, or by our distributors. We intend to continue to process registrations ourselves or through distributors as required.

We currently hold a registration from Health Canada for our disinfectant product. Other third-party distributors hold registrations in China and are actively pursuing registrations for our disinfectant products in various Asian markets. Additionally, an opinion has been granted under the Scientific Committee on Consumer Products to sell SDC in the European Union for use in cosmetics, which includes personal care products.

Employees

As of October 28, 2021, we employed 10 full-time and 1 part-time employee. We believe that we have been successful in attracting skilled and experienced personnel, but competition for personnel is intense and there can be no assurance that we will be able to attract and retain qualified personnel in the future. None of our employees are covered by collective bargaining agreements and we consider relations with our employees to be good.

Company Information

We were incorporated in the state of California in August 1992 as Innovative Medical Services. In September 2003, we changed our name to PURE Bioscience. In March 2011, we reincorporated in the state of Delaware under the name “PURE Bioscience, Inc.”

Our corporate offices are located at 9669 Hermosa Avenue, Rancho Cucamonga, California 91730. Our telephone number is (619) 596-8600. Our website address is www.purebio.com. We make available free of charge on our website our periodic and current reports, proxy statements and other information as soon as reasonably practicable after such reports are filed with the Securities and Exchange Commission, or SEC. Information contained on, or accessible through, our website is not part of this report or our other filings with the SEC. Our SEC filings are also available to the public from the SEC’s website at www.sec.gov.

Item 1A. Risk Factors

You should carefully consider the following information about risks and uncertainties that may affect us or our business, together with the other information appearing elsewhere in this Annual Report on Form 10-K, including our consolidated financial statements and the related notes thereto. If any of the following events, described as risks, actually occur, either alone or taken together, our business, financial condition, results of operations and future growth prospects would likely be materially and adversely affected. In these circumstances, the market price of our common stock could decline, and you may lose all or part of your investment in our securities. An investment in our securities is speculative and involves a high degree of risk. You should not invest in our securities if you cannot bear the economic risk of your investment for an indefinite period of time and cannot afford to lose your entire investment. There may be additional risks that we do not presently know of or that we currently believe are immaterial which could also impair our business and financial position.

Risks Related to Our Business and Industry

As a result of our historical lack of financial liquidity, we do not currently have sufficient working capital to fund our planned operations and may not be able to continue as a going concern.

We have a history of recurring losses, and as of July 31, 2021 we have incurred a cumulative net loss of $125,800,000. During the fiscal year ended July 31, 2021, we recorded a net loss of $2,319,000 on recorded net revenue of $3,927,000. In addition, during the year ended July 31, 2021 we used $1,688,000 in operating and investing activities resulting in a cash balance of $2,390,000 as of July 31, 2021. As a result, our existing cash resources are not sufficient to meet our anticipated needs over the next twelve months from the date hereof, and we will need to raise additional capital to continue our operations and to implement our business plan, which capital may not be available on acceptable terms or at all.

Our capital requirements will depend on many factors, including, among others:

The above factors, along with our history and near term forecast of incurring net losses and negative operating cash flows, raise substantial doubt about our ability to continue as a going concern. If we do not obtain additional capital from external sources, we will not have sufficient working capital to fund our planned operations or be able to continue as a going concern. We cannot assure you that additional financing will be available when needed or that, if available, we can obtain financing on terms favorable to us or to our stockholders. If we raise additional funds from the issuance of equity securities, substantial dilution to our existing stockholders would likely result. If we raise additional funds by incurring debt financing, the terms of the debt may involve significant cash payment obligations as well as covenants and specific financial ratios that may restrict our ability to operate our business. Further, any contracts or license arrangements we enter into to raise funds may require us to relinquish our rights to our products or technology, and we cannot assure you that we will be able to enter into any such contracts or license arrangements on acceptable terms, or at all. Having insufficient funds may require us to delay or scale back our marketing, distribution and other commercialization activities or cease our operations altogether.

We have a history of losses, and we may not achieve or maintain profitability.

We had net income of $4,000 for the fiscal year ended July 31, 2020 but had a loss of $2.2 million for the fiscal year ended July 31, 2021. As of July 31, 2021, we have incurred a cumulative net loss of approximately $126 million. Although we believe we are making progress on implementing our business plan focused on the food safety market, we expect to continue to have losses in future periods. None of our existing agreements, including those with Packers Sanitation Services, Inc, Subway and Chipotle, contain provisions that provide for fixed or minimum revenues. If the penetration into the marketplace of PURE Hard Surface, PURE Control and our other SDC-based products is unsuccessful, our revenue growth is slower than anticipated or our operating expenses exceed expectations, we may not achieve profitability, and we may never achieve profitability again. Slower than anticipated revenue growth could force us to reduce our sales and marketing efforts, our product testing and optimization, and our product development and regulatory initiatives, and/or force us to reduce the size and scope of our operations, to sell or license our technologies to third parties, or to cease operations altogether. Given our recent introduction of our SDC-based products in the food safety market, we are unable to predict the extent of any future income or our future losses and we may not be able to sustain or increase profitability on an ongoing basis.

The currently evolving situation related to the COVID-19 pandemic could adversely affect our business, financial condition and results of operations.

The COVID-19 pandemic has led to severe disruptions in general economic activities, as businesses and federal, state, and local governments take increasingly broad actions to mitigate this public health crisis. While we have experienced some delays related to final third-party validation of certain of our products and product rollouts by customers using PURE Control, we have not experienced a material disruption to our business. In addition, we previously benefited from increased demand from our customers for our PURE Hard Surface product due to a focus on surface disinfecting in response to attempting to prevent COVID-19 transmission. We subsequently experienced an abatement in such demand and cannot assure you that demand will stabilize. Additionally, we are beginning to experience supply chain issues with our various plastic packaging configurations and citric acid. Further, on a go-forward basis, we cannot guarantee the overall economic conditions will not affect our business, as these conditions may significantly negatively impact all aspects of our business. Our business is dependent on the continued health and productivity of our employees, including our sales staff and corporate management team.

Additionally, our liquidity could be negatively impacted if these conditions continue for a significant period of time and we may be required to pursue additional sources of financing to obtain working capital, maintain appropriate inventory levels, and meet our financial obligations. Currently, capital and credit markets have been disrupted by the crisis and our ability to obtain any required financing is not guaranteed and largely dependent upon evolving market conditions and other factors. Depending on the continued impact of the crisis, further actions may be required to improve our cash position and capital structure.

The extent to which the COVID-19 pandemic ultimately impacts our business, sales, results of operations and financial condition will depend on future developments, which are highly uncertain and cannot be predicted, including, but not limited to, the duration of the outbreak, its severity, the actions to contain the virus or treat its impact, and how quickly and to what extent normal economic and operating conditions resume and, more specifically, the effect it has on our customers and suppliers. Even after the COVID-19 pandemic has subsided, we may experience significant impacts to our business as a result of its global economic impact, including any economic downturn or recession that has occurred or may occur in the future.

Raising additional funds by issuing securities or through collaboration and licensing arrangements may cause dilution to existing stockholders, restrict our operations or require us to relinquish proprietary rights.

We may need to increase our liquidity and capital resources in future periods. We have a history of raising funds through offerings of our common stock and warrants to purchase shares of our common stock, and we may in the future raise additional funds through public or private equity offerings, debt financings or corporate collaborations and licensing arrangements. To the extent that we raise additional capital by issuing equity securities, our stockholders’ ownership will be diluted. Additionally, any debt financing we obtain may involve covenants that restrict our operations. These restrictive covenants may include, among other things, limitations on borrowing, specific restrictions on the use of our assets, as well as prohibitions on our ability to create liens on our assets, pay dividends on or redeem our capital stock or make investments. In addition, if we raise funds through collaboration and licensing arrangements, it may be necessary to grant licenses on terms that are not favorable to us or relinquish potentially valuable rights to our products or proprietary technologies. We may be required in future collaborations to relinquish all or a portion of our sales and marketing rights with respect to our products or license intellectual property that enable licensees to develop competing products in order to complete any such transaction.

As of October 28, 2021, we have 98,207,531 shares of common stock issued and outstanding or reserved for issuance under equity compensation plans, vested and unvested options, warrants, and unvested restricted stock units. Our current authorized capital stock is limited to 150,000,000 shares of common stock and 5,000,000 shares of preferred stock. Any increase in our authorized capital stock would require the approval of a majority of our shareholders as well as the approval of our Board of Directors. If we were unable to increase our authorized capital stock for any reason, our ability to raise additional capital through the issuance of equity or convertible debt would be severely compromised and we may be unable to obtain equity or convertible debt capital at all.

We need to continue to increase customer awareness and adoption of our food safety product offerings, PURE Hard Surface and PURE Control.

Our success will depend on our ability to continue to increase customer awareness and adoption of our food safety product offerings, PURE Hard Surface and PURE Control. We only recently received the required FDA and USDA approvals to market PURE Control as a direct food contact processing aid for fresh produce and as a spray or dip applied to raw poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing. Due to the recent introduction of our food safety products and the importance of food safety to our customers, the sales cycle to secure new customers is long and unpredictable. We have encountered and likely will continue to encounter risks and difficulties associated with introducing or establishing new commercial products in this highly competitive and rapidly evolving market. These risks include the following, among others:

Any failure to successfully address these risks and uncertainties could seriously harm our business and prospects.

We may not be able to correctly estimate our future revenues and operating expenses, which could lead to cash shortfalls, and require us to secure additional financing sooner than planned.

We may not correctly predict the amount or timing of future revenues and our operating expenses may fluctuate significantly in the future as a result of a variety of factors, many of which are outside of our control. These factors include:

In addition, our budgeted expense levels are based in part on our expectations concerning current and future revenues from sales of our products and services, and from collaborations with third parties. However, we may not correctly predict the amount or timing of future revenues. In addition, we may not be able to adjust our operations in a timely manner to compensate for any unexpected shortfall in our revenues or we may increase our expenses as part of implementing our long-term business plan. As a result, a significant shortfall in our planned revenues or a significant increase in our planned expenses could have an immediate and material adverse effect on our business and financial condition. In such case, we may be required to issue additional equity or debt securities or enter into other commercial arrangements, including relationships with corporate and other partners, sooner than anticipated to secure the additional financial resources to support our development efforts and future operations.

Our quarterly operating results may vary, which could negatively affect the market price of our common stock.

Because of our limited operating history and the early commercial stage of our SDC-based products in the food safety market, we have limited insight into trends that may emerge and affect our business. Forecasting future revenues is difficult, especially because we have only recent begun to generate meaningful revenues from the sale of our SDC-based products, our products are novel, and market acceptance of our products is reliant on our customers’ confidence, based on scientific data and actual in-plant trials, that our product can improve their food safety efforts. Because food safety is such a critical factor to our customers and potential customers, we often experience long sales cycles and our customers often require extensive evaluation and in-plant trial periods before agreeing to use our products throughout their systems. In addition, fluctuations in the buying patterns of our current or potential customers could significantly affect the level of our sales on a period to period basis. Additional factors that could cause our financial results to fluctuate unexpectedly, include: the mix of product sales, the cost of product sales, our ability to meet customer demand, delays in achieving our regulatory milestones, changes in our operating expenses, including non-cash expenses such as the fair value of stock options granted to our employees, and manufacturing or supply issues. As a result, our quarterly operating results may vary, which could negatively affect the market price of our common stock.

A loss of one or more of our key customers could adversely affect our business.

From time to time, one or a small number of our customers may represent a significant percentage of our revenue. Our largest customers accounted for 11% of our net product sales for the fiscal year ended July 31, 2021. No other individual customer accounted for 10% or more of our net product sales. Although we have agreements with many of our customers, these agreements typically do not prohibit customers from purchasing products and services from competitors or contain minimum purchase obligations. A decision by any of our major customers to significantly reduce the amount of product ordered or license fees paid, or their failure or inability to pay amounts owed to us in a timely manner, or at all, could have a significant adverse effect on our business.

We are dependent on our core SDC technology and if our efforts to achieve or maintain market acceptance of our core SDC technology are not successful, we are unlikely to continue to maintain profitability.

We have and are currently focusing substantially all of our time and financial resources in the development and commercialization of our core SDC technology to address food safety risks across the food industry supply chain. Although our SDC technology has applications in multiple industries, we expect that sales of SDC and SDC-based products as a food safety solution will constitute a substantial portion, or all, of our revenues in future periods. We are marketing our SDC-based products to restaurant chains, food manufacturers, food processors and food transportation companies. Our SDC-based products have not yet been broadly accepted into the food safety market, and may never be broadly accepted. Any material decrease or significant delay in the overall level of sales or expected sales of, or the prices for, our SDC-based products, whether as a result of competition, delays in obtaining regulatory approvals, long sales cycles, change in customer demands or requirements, or any other factor, would have a materially adverse effect on our business, financial condition and results of operations. In addition, even if our products achieve market acceptance, we may not be able to maintain product sales or other forms of revenue over time if new products or technologies are introduced by competitors that are more favorably received than our products, are more cost-effective or otherwise render our products less attractive or obsolete.

We are subject to intense competition in the food safety market.

Our SDC-based products compete in the highly competitive food safety market. Our SDC-based product offerings (especially at higher silver ion concentration levels) are typically more expensive to produce than existing treatment chemicals, and as a result, customers may not purchase our products for cost reasons, even if we are successful in demonstrating the superior efficacy of our products. In addition, customers may determine that the other benefits offered by our products (e.g., non-toxic, non-caustic, and neutral to positive yield impact) are not sufficient to overcome the lower cost products offered by our competitors. Further, most of our competitors have been in business for a longer period of time than we have, and offer a greater number of products and services than we do and have greater financial, technical, sales and other resources than we do. Many of our competitors already have well established brands and distribution capabilities, and in some cases are able to leverage the sale of other products with more favorable terms for products competing with our own. We also have significantly fewer sales personnel than virtually all of our competitors. Furthermore, recent trends in this industry are for large food safety companies to consolidate into a smaller number of very large entities, which further concentrates financial, technical and market strength and increases competitive pressure in the industry. If we directly compete with these very large entities for the same markets and/or products, their financial strength could prevent or delay us from capturing a meaningful share the food safety market. It is also possible that developments by our competitors will make our technologies or products noncompetitive or obsolete. Our ability to compete will depend upon our ability, and the ability of our distributors and other partners, to develop brand recognition, develop the scientific and plant trial data to demonstrate the efficacy of our products, and to displace existing, established and future products in our relevant target markets. We, or our distributors and partners, may not be successful in doing so, which would have a materially adverse effect on our business, financial condition and results of operations.

We have limited sales, marketing and product distribution experience.

We have limited experience in the sales, marketing and distribution of our products in the food safety market. We began to focus on the food safety market in August 2013. We received the required FDA approvals to market PURE Control as a direct food contact processing aid for fresh produce in January 2016. We received the required USDA and FDA approvals to market PURE Control for use as a spray or dip applied to poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing of fresh poultry in July 2016 and May 2017, respectively. As a result, our sales and marketing experience with these products are limited, and our current sales, distribution and marketing strategies and programs may not be successful. Further, due to the recent introduction of our food safety products and the importance of food safety to our customers, the sales cycle to secure a new customer is long and unpredictable. Potential customers typically require that we complete extensive in-plant validation studies with our products. We may not be successful in demonstrating the effectiveness of PURE Control in actual in-plant use situations or satisfy the requirements of our potential customers. Moreover, we may not be successful in converting in-plant trials into customer product orders. We also have a relatively small sales and marketing organization and a limited number of distributors. We may not be able to establish the sales, marketing, and distribution capabilities necessary to build our business and generate sufficient revenues to support our operations and the implementation of our business plan.

We are dependent on a third-party, over whom we have limited control, to manufacture our SDC-based products.

On June 9, 2019, we entered into a five-year strategic collaboration agreement with St. Louis-based Intercon Chemical Company (“ICC”) where we granted ICC the right to be the exclusive manufacture for all our SDC-based products. We do not have any manufacturing facilities ourselves and we currently rely on ICC to manufacture our SDC-based products and may in the future rely on one or more third-party manufacturers to properly manufacture our products. We may not be able to quickly replace our manufacturing capacity if ICC is unable to manufacturer our products as a result of a fire, natural disaster (including an earthquake), equipment failure or other difficulty, or if such ICC facilities are deemed not in compliance with current “good manufacturing practices,” and the noncompliance could not be rapidly rectified. ICC is our single manufacturer for our SDC-based products and may not be replaced without significant effort and delay in production. A supply interruption or an increase in demand beyond our current manufacturer’s capabilities could harm our ability to manufacturer such products until new manufacturers are identified and qualified, which would have a significant adverse effect on our business and results. Any third-party manufacturer that we find may not match our quality standards or be able to meet customer requirements.

Additionally, our inability or reduced capacity to have our products manufactured would prevent us from successfully evaluating or commercializing our proposed products. Our dependence upon third parties for the manufacture of our products may adversely affect our profit margins and our ability to develop and deliver proposed products on a timely and competitive basis.

We rely on third parties to develop SDC-based products, and they may not do so successfully or diligently.

We have granted ICC and other third parties to whom we license rights to our technology certain distribution and development rights to products containing SDC for applications and markets outside the U.S. food safety market. Our reliance on ICC and other third parties for development and distribution activities reduces our control over these activities. In such arrangements, we have relied, and expect in the future to rely, on the third party to fund and direct product development activities and appropriate regulatory filings. Any of these third parties may not be able to successfully develop such SDC-based products due to, among other factors, a lack of capital, a lack of appropriate diligence, insufficient devotion to sales efforts, a change in the evaluation by the third party of the market potential for SDC-based products, technical failures, and poorer than expected results from testing or trial use of any products that may be developed. If the third parties on which we rely are not successful in such development activities, our business and operating results would be adversely affected.

Pricing and supply issues may have a material impact on our margins and our ability to supply our customers.

All of the supply ingredients used to manufacture our SDC-based products are available from multiple suppliers. However, commodity prices for some ingredients can vary significantly and the margins that we are able to generate could decline if prices rise. For example, both silver and citric acid prices have been volatile in recent periods.

In addition to such commodities, we also rely on producers of specialized packaging inputs such as bottles and labels for finished products. Due to their specialized nature, the supply of such inputs can be periodically constrained and result in additional costs to obtain these items, which may in turn inhibit our ability to supply products to our customers.

We are generally unable to increase our product prices to our customers, partners and distributors quickly in order to maintain our margins, and significant price increases for key inputs could therefore have an adverse effect on our results of operations. Price increases can also result in lost sales, and any inability to supply our customers’ orders can lead to lost future sales to such customers.

We expect ICC to be the sole source supplier of our SDC concentrate and we may use other third parties to blend, package and provide fulfillment activities for our finished products in future periods. We expect that our margins may be reduced by using ICC and other such third parties, and our ability to maintain product quality may not be as extensive or effective as when we produce these products in our own facility(ies). Any quality control issues could lead to product recalls and/or the loss of future sales, which would reduce our revenues and/or profits.

If we are not able to manage any growth we achieve effectively, our business and operating results will be harmed.

In order to implement our business plan and achieve and maintain market acceptance of our SDC-based products, we expect to expand our business operations and hire additional sales and support personnel. We may not have sufficient resources to do so. If we hire additional personnel and invest in additional infrastructure, we may not be effective in expanding our operations and our systems, procedures or controls may not be adequate to support any such expansion. Failure to properly manage our growth could have a material adverse effect on our business and our operating results.

If we suffer negative publicity concerning the safety or efficacy of our products, our sales may be harmed.

If concerns should arise about the safety or efficacy of any of our products that are marketed, regardless of whether or not such concerns have a basis in generally accepted science or peer-reviewed scientific research, such concerns could adversely affect the market for those products. Similarly, negative publicity could result in an increased number of product liability claims, whether or not those claims are supported by applicable law.

We may become subject to product liability claims.

As a business that manufactures and markets products for use by consumers and institutions, we may become liable for any damage caused by our products, whether used in the manner intended or not, including potentially damage to our customers’ businesses. Regardless of merit or potential outcome, product liability claims against us may result in, among other effects, the inability to commercialize our products, impairment of our business reputation, and distraction of management’s attention from our primary business. If we cannot successfully defend ourselves against product liability claims we could incur substantial liabilities. Although we maintain general and product liability insurance, our insurance may not cover potential claims and may not be adequate to indemnify for liabilities that may be imposed. Any imposition of liability that is not covered by insurance or is in excess of insurance coverage could harm our business and operating results.

We depend on key personnel for our continued operations and future success, and a loss of certain key personnel could significantly hinder our ability to move forward with our business plan.

Our success depends largely on the execution of our business strategy by our management team and the members of our Board of Directors. Our Board and management will be evaluating how to best execute our near-term strategy to drive customer adoption in the food industry by addressing food safety solutions across the supply chain in order to prevent or mitigate food contamination or the potential for food-borne illness with specific customer focus in foodservice providers, food processors and food manufacturers. Our directors, executive officers and key personnel could terminate their services with us at any time without notice and without penalty. Additionally, we do not maintain key person life insurance policies on our directors, executive officers or other employees. The loss of one or more of our directors, executive officers or key employees could seriously harm our ability to execute on our business strategy, which could harm our business, results of operations, financial condition, and/or the market price of our common stock. We cannot assure you that in such an event we would be able to recruit qualified personnel able to replace these individuals in a timely manner, or at all, on terms acceptable to either us or to any qualified candidate. Even if we were able to replace any such individuals in a timely manner, if we are unable to effectively integrate new executive officers or key employees, our operations and prospects could be harmed.

Because competition for highly qualified sales and marketing and management personnel is intense, we may not be able to attract and retain the employees we need to support our potential growth.

To successfully meet our objectives, we must attract and retain highly qualified sales and marketing and management personnel with specialized skill sets focused on the industries in which we compete, or intend to compete. Competition for qualified business development and bioengineering personnel can be intense. Our ability to meet our business development objectives will depend in part on our ability to recruit, train and retain top quality people with advanced skills who understand our technology and business. In addition, it takes time for our new personnel to become productive and to learn our business. If we are unable to hire or retain qualified personnel, it will be difficult for us to sell our products or to license our technology or to achieve or maintain regulatory approvals, and we may experience a shortfall in revenue and not achieve our anticipated, or any, growth.

We may engage in strategic transactions that could impact our liquidity, increase our expenses and present significant distractions to our management.

From time to time we may consider engaging in strategic transactions, such as acquisitions of companies, asset purchases and out-licensing or in-licensing of products, product candidates or technologies. Any such transaction may require us to incur non-recurring or other charges, may increase our near and long-term expenditures and may pose significant integration challenges or disrupt our management or business, which could adversely affect our operations and financial results. For example, these transactions may entail numerous operational and financial risks, including, among others, exposure to unknown liabilities, disruption of our business and diversion of our management’s time and attention in order to develop acquired products, product candidates or technologies, difficulty and cost in combining the operations and personnel of any acquired businesses with our operations and personnel, and inability to retain key employees of any acquired businesses. Accordingly, although we may not choose to undertake or may not be able to successfully complete any transactions of the nature described above, any transactions that we do undertake or complete could have a material adverse effect on our business, results of operations, financial condition and prospects.

We may invest or spend our cash in ways with which you may not agree or in ways which may not yield a significant return.

Our management has considerable discretion in the use of our cash. Our cash may be used for purposes that do not increase our operating results or market value. Until the cash is used, it may be placed in investments that do not produce significant income or that may lose value. The failure of our management to invest or spend our cash effectively could result in unfavorable returns and uncertainty about our prospects, each of which could cause the price of our common stock to decline.

We may not be able to utilize all, or any, of our tax net operating loss carry-forwards and our future after-tax earnings, if any, could be reduced.

At July 31, 2021, we had federal and state tax net operating loss carry-forwards of approximately $107.5 million and $62.3 million, respectively. Utilization of these net operating loss carry-forwards may be subject to a substantial annual limitation due to ownership change limitations that may have occurred, including with respect to our recent private placements, or that could occur in the future, as required by Section 382 of the Internal Revenue Code as well as similar state provisions. These ownership changes may limit the amount of net operating loss carry-forwards that can be utilized annually to offset future taxable income and tax, respectively. In general, an ownership change, as defined by Section 382 of the Internal Revenue Code, results from a transaction or series of transactions over a three-year period resulting in an ownership change of more than 50 percentage points of the outstanding stock of a company by certain stockholders or public groups. Since our formation, we have raised capital through the issuance of capital stock on several occasions (both before and after our initial public offering in 1996) which, combined with the purchasing stockholders’ subsequent disposition of those shares, may have resulted in such an ownership change, or could result in an ownership change in the future based upon subsequent disposition. While we believe that we have not experienced an ownership change, the pertinent tax rules related thereto are complex and subject to varying interpretations, and thus the applicable taxing authorities may take an alternative position.

Our current federal tax loss carry-forwards began expiring in the year ended July 31, 2020 and, unless previously utilized, all but $3.7 million will completely expire in the year ending July 31, 2038. The $3.7 million can be carried forward indefinitely. Our state tax loss carry-forwards began to expire in the year ending July 31, 2029, and will completely expire in the year ending July 31, 2040.

Risks Related to the Regulation of our Products

If we are unable to obtain the required regulatory approvals from the FDA and USDA, or if such efforts are delayed, our ability to commercialize PURE Control as a direct food contact processing aid will be harmed and our business and operating results will suffer.

We received the required FDA approvals to market PURE Control as a direct food contact processing aid for raw poultry and fresh produce in December 2015 and January 2016, respectively. No additional approval from the USDA is required for fresh produce. In July 2016, we received a “No Objection Letter” from the USDA’s Food Safety and Inspection Service (FSIS) granting approval for SDC-based PURE Control to be used as a spray or dip applied to poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing of fresh poultry. In January 2017, we submitted an additional FCN to the FDA to allow use of higher SDC concentrations in poultry processing, allowing the flexibility to adjust to varying plant and processing conditions. In May 2017, we received a Final Letter from the FDA for this FCN as well as a “No Objection Letter” from the USDA’s Food Safety and Inspection Service (FSIS) granting approval for the higher concentrations of SDC-based PURE Control to be used as a spray or dip applied to poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing of fresh poultry. We have not, however, received the required approval from the USDA to utilize PURE Control in OLR poultry processing. Further, even if we elect to seek regulatory approval, there is no assurance we will be successful in obtaining the required approvals from the FDA and USDA to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork. If we are unable to obtain the required regulatory approvals from the FDA and USDA, or if such efforts are delayed, our ability to commercialize PURE Control as a direct food contact processing aid for poultry and as a direct food contact processing aid for raw meets will be restricted and our business and operating results will suffer.

The industries in which we operate are heavily regulated.

We are focused on the marketing and continued development of our SDC antimicrobial technology for use in the food safety market. Our existing products, PURE Control and PURE Hard Surface, and any additional products we develop based on our SDC technology in future periods, require or will require approval by government agencies prior to marketing or sale in the U.S. or in foreign markets. Complying with applicable government regulations and obtaining necessary regulatory approvals can be, and has historically been, time consuming and expensive, due in part, we believe, to the novel nature of our technology. Regulatory review could involve delays or other actions adversely affecting the development, manufacture, marketing and sale of our products. While we cannot accurately predict the outcome of any pending or future regulatory review processes or the extent or impact of any future changes to legislation or regulations affecting review processes, we expect such processes to remain time consuming and expensive as we, or our partners, apply for approval to make new or additional efficacy claims for current products or to market new product formulations. Obtaining approvals for new SDC-based products in the U.S., or in markets outside the U.S., could take several years, or may never be accomplished.

SDC is a platform technology rather than a single use applied technology. As such, products developed from the platform may fall under the jurisdiction of multiple U.S. and international regulatory agencies. Our disinfectant and sanitizer products are regulated in the U.S. by the EPA. In addition to the EPA, each of the 50 states in the U.S. has its own government agencies that regulate the sale or shipment of our products into their state. We have obtained registration for these products from the EPA and all states into which such products are currently marketed and sold. We are required to meet certain efficacy, toxicity and labeling requirements and pay ongoing fees in order to maintain such registrations. We may not be able to maintain these registrations in the future, which may eliminate our continued ability to market and sell our products in some or all parts of the U.S. We also may not be able to obtain necessary registrations with the EPA and applicable states for other SDC disinfectant and sanitizer products that we or our partners may develop, which would limit our ability to sell any such products in the future.

Some potential applications of SDC, such as those aimed at healthcare, veterinary and certain food preparation markets, may require approval of other government agencies prior to marketing or sale in the U.S. or in foreign markets, such as the U.S. Food and Drug Administration, or FDA, or the United States Department of Agriculture, or USDA. Obtaining FDA and/or USDA approval is a complicated and expensive process and such approvals may never be obtained for any SDC products. If FDA and/or USDA approvals are obtained, the approvals may limit the uses for which SDC products may be marketed such that they may not be profitable to us, and the applicable products would be subject to pervasive and continuing regulation by the FDA and/or USDA that could lead to withdrawal or limitation of any product approvals.

For example, in November 2014, we withdrew, without prejudice, our FCN for raw poultry due to receipt of a Deficiency Letter from the FDA stating that the agency has developed new data that is currently under review, which data calls into question the long established safety levels of the dietary intake of silver in the U.S. from food contact uses previously approved by the FDA. As a result, the FDA indicated that it would not approve our FCN absent new data or additional information that adequately addresses its new toxicity concerns. We also received a similar Deficiency Letter from the FDA for the FCN we submitted in October 2014 for the use of SDC to reduce Salmonella, E. coli and Listeria in the processing of produce. In January 2015, we withdrew, without prejudice, our produce FCN and postponed the filing of our FCN for the use of SDC as a processing aid for beef and pork. We resubmitted our poultry FCN in June 2015. In September 2015, we received an Acknowledgement Letter from the FDA stating that our FCN for SDC as a raw poultry processing aid is complete and setting an effective date of December 2015. Following the completion of additional testing demonstrating further reduction of silver residues to levels approaching non-detectable, and subsequent encouraging discussions held with the FDA, we resubmitted our produce FCN in September 2015. We received the required FDA approvals to market PURE Control as a direct food contact processing aid for raw poultry and fresh produce in December 2015 and January 2016, respectively. In July 2016, we received a “No Objection Letter” from the USDA’s Food Safety and Inspection Service (FSIS) granting approval for SDC-based PURE Control to be used as a spray or dip applied to poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing of fresh poultry. In January 2017, we submitted an additional FCN to the FDA to allow use of higher SDC concentrations in poultry processing, allowing the flexibility to adjust to varying plant and processing conditions. In May 2017, we received a Final Letter from the FDA for this FCN as well as a “No Objection Letter” from the USDA’s Food Safety and Inspection Service (FSIS) granting approval for the higher concentrations of SDC-based PURE Control to be used as a spray or dip applied to poultry carcasses, parts and organs in pre-OLR (on-line reprocessing) and post chill processing of fresh poultry. Further, even if we elect to seek regulatory approval, there is no assurance we will be successful in obtaining the required approvals from the FDA and USDA to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork. If we are unable to obtain the required regulatory approvals from the FDA and USDA, or if such efforts are delayed, our ability to commercialize PURE Control as a direct food contact processing aid for poultry and as a direct food contact processing aid for raw meets will be restricted and our business and operating results will suffer.

We intend to fund and manage certain of our EPA-regulated product development internally, in conjunction with engaging regulatory consultants and partnering with other third parties. We have partnered, or intend to partner, with third parties who are seeking, or intend to seek, approvals to market SDC-based products in markets outside the U.S., and with other third parties who are developing FDA-regulated SDC-based products who, upon such development, would seek FDA approvals of such products. Our ability to market and sell our products is dependent on our and our partners’ ability to obtain and maintain required registrations and approvals of applicable regulatory agencies. Failure by our partners or us to comply with applicable regulations could result in fines or the withdrawal of approval for us or our partners and distributors to market our products in some or all jurisdictions or for certain indications, which could cause us to be unable to successfully commercialize SDC or otherwise achieve revenues from sales of such products.

We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes, and our partners, including our third-party manufacturer, failure to comply with applicable quality standards could affect our ability to commercialize SDC products.

The EPA and other applicable U.S. and foreign government agencies regulate our and our partners’ systems and processes, including those of ICC, for manufacturing SDC-based products. These regulations require that we and our partners observe “good manufacturing practices” in order to ensure product quality, safety and effectiveness. Failure by us or our partners to comply with current or future government regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages, and/or delays in product manufacturing, any or all of which could cause significant cost to us. Further, efficacy or safety concerns and/or manufacturing quality issues with respect to our products or those of our partners could lead to product recalls, fines, withdrawal of approvals, and/or declining sales, any or all of which could result in our failure to successfully commercialize SDC or otherwise achieve revenue growth.

Litigation or the actions of regulatory authorities may harm our business or otherwise distract our management.

Substantial, complex or extended litigation could cause us to incur major expenditures and would distract our management. For example, lawsuits against us or our officers or directors by employees, former employees, stockholders, partners, customers, or others, or actions taken by regulatory authorities, could be very costly and substantially disrupt our business. Such lawsuits and actions are not uncommon, and we may not be able to resolve such disputes or actions on terms favorable to us, and there may not be sufficient capital resources available to defend such actions effectively, or at all.

Risks Related to Our Intellectual Property

If we are unable to obtain, maintain or defend the patent and other intellectual property rights relating to our technology, we or our collaborators and distributors may not be able to develop and market proprietary products based on our technology, which would have a material adverse impact on our results of operations.

We rely and expect in the future to continue to rely on a combination of patent, trademark, trade secret and copyright protections, as well as contractual restrictions, to protect the proprietary aspects of our technology and business.

Legal protections of our intellectual property and proprietary rights afford only limited protection. For instance, we currently own twelve U.S. patents related to our SDC technology. The lives of these patents, and any patents that we may obtain in the future, are not indefinite, and the value to us of some or all of our patents may be limited by their terms. Further, although we have a number of U.S. and international patent applications pending, some or all of those applications may not result in issued patents, and the intellectual property claims therein would be unprotected. Additionally, obtaining and maintaining patent protection depends on our compliance with various procedural, document submission, fee payment and other requirements imposed by government patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements. Furthermore, the patent positions of bioscience companies can be highly uncertain and often involve complex legal, scientific and factual questions, and, therefore, we cannot predict with certainty whether we will be able to ultimately enforce our patents or other intellectual property rights. Third parties may challenge, invalidate or circumvent our patents and patent applications relating to our products, product candidates and technologies. In addition, our patent positions might not protect us against competitors with similar products or technologies because competing products or technologies may not infringe our patents.

In addition, to the extent that we operate internationally, the laws of foreign countries may not protect our proprietary rights to the same extent as the laws of the U.S. Many countries have a “first-to-file” trademark registration system, which may prevent us from registering or using our trademarks in certain countries if third parties have previously filed applications to register or have registered the same or similar trademarks. Additionally, changes in the patent and/or trademark laws or interpretations of such laws in the U.S. or other countries could diminish the value of our intellectual property rights. Moreover, our competitors may develop competing technologies that are not covered by the claims of, and therefore do not infringe upon, our issued patents, which could render our patents less valuable to us. If our proprietary rights cannot be, or are not sufficiently, protected by patent and trademark registrations, it could have a material adverse impact on our business and our ability to commercialize or license our technology and products.

Our own efforts to protect our intellectual property and other proprietary rights may also be insufficient. Despite efforts to protect our proprietary rights, including without limitation through confidentiality and other similar contractual restrictions, our means of protecting such rights may not be adequate and unauthorized parties may attempt to copy aspects of our proprietary technology, obtain and use information that we regard as proprietary, or otherwise misappropriate our intellectual property. In addition, unpatented proprietary rights, including trade secrets and know-how, can be difficult to protect and may lose their value if they are independently developed by a third party or if their secrecy is lost. It is possible that, despite our efforts, competitors or others will create and use products, adopt service names similar to our service names or otherwise violate or misappropriate our proprietary rights. The infringement of such rights could have a material negative impact on our business and on our results of operations.

Litigation may be necessary to enforce our intellectual property and other proprietary rights, which would be expensive and could consume time and other resources. The result of any such litigation may be the court’s ruling that our patents or other intellectual property rights are invalid and/or should not be enforced. Additionally, even if the validity of such rights is upheld, the court could refuse to stop a third party’s infringing activity on the ground that such activities do not infringe our rights. The U.S. Supreme Court has recently revised certain tests regarding granting patents and assessing the validity of patents to make it more difficult to obtain patents. As a consequence, issued patents may be found to contain invalid claims according to the newly revised standards. Some of our patents may be subject to challenge and subsequent invalidation or significant narrowing of claim scope in a reexamination proceeding, or during litigation, under the revised criteria.

We may incur substantial costs as a result of litigation or other proceedings relating to patent and other intellectual property rights and we may be unable to protect our rights to, or use, our technology.

If we choose to go to court to attempt to stop someone else from using the inventions claimed in our patents, that individual or company has the right to ask the court to rule that our patents are invalid and/or should not be enforced against that third party. These lawsuits are expensive and would consume time and other resources even if we were successful in stopping the infringement of these patents. In addition, there is a risk that the court will decide that these patents are not valid and that we do not have the right to stop the other party from using the inventions. There is also the risk that, even if the validity of these patents is upheld, the court will refuse to stop the other party on the ground that such other party’s activities do not infringe our rights to these patents.

Furthermore, a third party may claim that we are using inventions covered by the third party’s patent rights and may file an injunction to stop us from engaging in our normal operations and activities, including making or selling our products. These lawsuits are costly and could affect our results of operations and divert the attention of managerial and technical personnel. There is a risk that a court would decide that we are infringing the third party’s patents and would order us to stop the activities covered by the patents. In addition, there is a risk that a court will order us to pay the other party damages for having violated the other party’s patents. The biotechnology industry has produced a proliferation of patents, and it is not always clear to industry participants, including us, which patents cover various types of products or methods of use. The coverage of patents is subject to interpretation by the courts, and the interpretation is not always uniform. If we are sued for patent infringement, we would need to demonstrate that our products or methods of use either do not infringe the patent claims of the relevant patent and/or that the patent claims are invalid, and we may not be able to do this. Proving invalidity, in particular, is difficult since it requires a showing of clear and convincing evidence to overcome the presumption of validity enjoyed by issued patents.

Because some patent applications in the United States may be maintained in secrecy until the patents are issued, patent applications in the United States and many foreign jurisdictions are typically not published until eighteen months after filing, and publications in the scientific literature often lag behind actual discoveries, we cannot be certain that others have not filed patent applications for technology covered by our issued patents or our pending applications or that we were the first to invent the technology. Our competitors may have filed, and may in the future file, patent applications covering technology similar to ours. Any such patent application may have priority over our patent applications and could further require us to obtain rights to issued patents covering such technologies. If another party has filed a United States patent application on inventions similar to ours, we may have to participate in an interference proceeding declared by the PTO, to determine priority of invention in the United States. The costs of these proceedings could be substantial, and it is possible that such efforts would be unsuccessful, resulting in a loss of our United States patent position with respect to such inventions.

Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.

Third parties may claim that we infringe their proprietary rights and may prevent us from manufacturing and selling some of our products.

Our manufacture, use and sale of SDC-based products may subject us to lawsuits relating to the validity and infringement of patents or other proprietary rights of third parties. Litigation may be costly and time-consuming, and could divert the attention of our management and technical personnel. If we are found to have violated the trademark, trade secret, copyright, patent or other intellectual property or proprietary rights of others, such a finding could result in the need to cease use of a trademark, trade secret, copyrighted work or patented invention in our business and our obligation to pay a substantial amount for past infringement. If the rights holders are willing to permit us to continue to use their intellectual property rights, it may be necessary for us to enter into license arrangements with unfavorable terms and pay substantial amounts in royalty and other license fees. Either having to cease use or pay such fees could prevent us, or our third-party manufacturer, from manufacturing and selling our products, which could make us much less competitive in our industry and have a material adverse impact on our business, operating results and financial condition.

Confidentiality agreements with employees and others may not adequately prevent disclosure of our trade secrets and other proprietary information and may not adequately protect our intellectual property, which could limit our ability to compete.

We may rely in part on trade secret protection in order to protect our proprietary trade secrets and unpatented know-how. However, trade secrets are difficult to protect, and we cannot be certain that others will not develop the same or similar technologies on their own. We have taken steps, including entering into confidentiality agreements with our employees, consultants, outside scientific collaborators, sponsored researchers and other advisors, to protect our trade secrets and unpatented know-how. These agreements generally require that the other party keep confidential and not disclose to third parties all confidential information developed by the party or made known to the party by us during the course of the party’s relationship with us. We also typically obtain agreements from these parties which provide that inventions conceived by the party in the course of rendering services to us will be our exclusive property. However, these agreements may not be honored and may not effectively assign intellectual property rights to us. Enforcing a claim that a party illegally obtained and is using our trade secrets or know-how is difficult, expensive and time consuming, and the outcome is unpredictable. In addition, courts outside the United States may be less willing to protect trade secrets or know-how. The failure to obtain or maintain trade secret protection could adversely affect our competitive position.

We may be subject to claims that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

As is common in the biotechnology, food, chemical and pharmaceutical industries, we employ individuals who were previously employed at other biotechnology, food, chemical or pharmaceutical companies, including our competitors or potential competitors. Although no claims against us are currently pending, we may be subject to claims that these employees or we have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

Risks Related to our Common Stock

The price of our common stock may be volatile.

Our common stock is approved for quotation on the OTC Markets’ OTCQB marketplace under the symbol “PURE.” The OTCQB is a regulated quotation service that displays real-time quotes, last-sale prices and volume information in over-the-counter equity securities and provides significantly less liquidity than a listing on the Nasdaq Stock Markets or other national securities exchange. The OTCQB securities are traded by a community of market makers that enter quotes and trade reports. This market is limited in comparison to the national stock exchanges and any prices quoted may not be a reliable indication of the value of our common stock. Quotes for stocks included on the OTCQB are not listed in the financial sections of newspapers as are those for the Nasdaq Stock Market or the NYSE. Therefore, prices for securities traded solely on the OTCQB may be difficult to obtain.

Trading on the OTCQB Marketplace as opposed to a national securities exchange has resulted and may continue to result in a reduction in some or all of the following, each of which could have a material adverse effect on the price of our common stock and our company:

The price and trading volume of our common stock have historically been volatile.

In addition, the market price and trading volume of our common stock may be subject to wide fluctuations in the future in response to:

In addition, the stock market in general, the OTCQB, and the market for shares of novel technology companies in particular, have experienced extreme price and volume fluctuations that in some cases may be unrelated or disproportionate to the operating performance of those companies. These broad market and industry factors may materially harm the market price of our common stock, regardless of our operating performance. In addition, this volatility could adversely affect an investor’s ability to sell shares of our common stock, and/or the available price for such shares, at any given time.

Potential sales or issuances of our common stock to raise capital, or the perception that such sales could occur, could cause dilution to our current stockholders and the price of our common stock to fall.

We have historically supported our operations through the issuance of equity securities and may continue to do so in the future. For example, during October 2019 and March 2020, we completed two closings of a private placement financings to accredited investors, in which we raised net proceeds of approximately $2,830,000 in the Closings and issued an aggregate of 9,758,619 shares of our common stock at a purchase price of $0.29 per share. Although we may not be successful in obtaining financing through equity sales on terms that are favorable to us in the future, if at all, any such sales that do occur could result in substantial dilution to the interests of existing holders of our common stock. Additionally, the sale of a substantial number of shares of our common stock or other equity securities to any new investors, or the anticipation of such sales, could cause the trading price of our common stock to fall.

Our common stock is deemed to be “penny stock,” which may make it more difficult for investors to sell their shares due to suitability requirements.

Shares of our common stock are subject to the so-called “penny stock” rules as that term is defined in Rule 3a51-1 promulgated under the Securities Exchange Act of 1934. These requirements may reduce the potential market for our common stock by reducing the number of potential investors. This may make it more difficult for investors in our common stock to sell shares to third parties or to otherwise dispose of them. This could cause our stock price to decline.

Broker-dealers dealing in penny stocks are required to provide potential investors with a document disclosing the risks of penny stock. Moreover, broker-dealers are required to determine whether an investment in a penny stock is a suitable investment for a prospective investor. Such requirements may discourage broker-dealers from effecting transactions in our common stock, which could limit the market price and liquidity of our common stock.

We have never paid dividends on our capital stock, and we do not anticipate paying any cash dividends in the foreseeable future.

The continued operation and expansion of our business will require substantial funding. Investors seeking cash dividends in the foreseeable future should not purchase our common stock. We have paid no cash dividends on any of our capital stock to date and we currently intend to retain our available cash to fund the development and growth of our business. Any determination to pay dividends in the future will be at the discretion of our Board and will depend upon results of operations, financial condition, contractual restrictions, restrictions imposed by applicable law and other factors our Board deems relevant. We do not anticipate paying any cash dividends on our common stock in the foreseeable future. Any return to stockholders will therefore be limited to the appreciation of their stock, which may never occur.

Anti-takeover provisions under our charter documents and Delaware law could delay or prevent a change of control and could also limit the market price of our stock.

Certain provisions of our charter and bylaws may delay or frustrate the removal of incumbent directors and may prevent or delay a merger, tender offer, or proxy contest involving us that is not approved by our Board, even if such events may be beneficial to the interests of stockholders. For example, our Board, without stockholder approval, has the authority and power to authorize the issuance of up to 5,000,000 shares of preferred stock and such preferred stock could have voting or conversion rights that could adversely affect the voting power of the holders of our common stock. Further, the one-for-eight reverse stock split of our outstanding common stock that we effected on August 14, 2012 has increased the proportion of unissued and authorized common shares to issued and outstanding common shares, which could allow our Board to issue large numbers of additional shares of our common stock that could significantly reduce the voting power of our current stockholders. In addition, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which may discourage, delay or prevent certain business combinations with stockholders owning 15% or more of our outstanding voting stock. These and other provisions in our charter documents may make it more difficult for stockholders or potential acquirers to initiate actions that are opposed by our then-current board of directors, including delaying or impeding a merger, tender offer, or proxy contest or other change of control transaction involving the Company. Any delay or prevention of a change of control transaction could cause stockholders to lose a substantial premium over the then-current market price of their shares.

General Risk Factors

Compliance with the reporting requirements of federal securities laws can be expensive.

We are a public reporting company in the United States, and accordingly, subject to the information and reporting requirements of the Exchange Act and other federal securities laws, including the compliance obligations of the Sarbanes-Oxley Act. The costs of complying with the reporting requirements of the federal securities laws, including preparing and filing annual and quarterly reports and other information with the SEC and furnishing audited reports to stockholders, can be substantial.

If we fail to maintain an effective system of internal controls, we may not be able to accurately determine our financial results or prevent fraud. As a result, the Company’s stockholders could lose confidence in our financial results, which could harm our business and the value of the Company’s common shares.

Effective internal controls are necessary for us to provide reliable financial reports and effectively prevent fraud. Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate and report on our internal controls over financial reporting. Our internal controls and financial reporting are not subject to attestation by our independent registered public accounting firm pursuant to the exemption provided to issuers that are not “large accelerated filers” or “accelerated filers” under the Dodd-Frank Act of 2010. We cannot be certain that we will be successful in maintaining adequate internal controls over our financial reporting and financial processes in the future. We may in the future discover areas of our internal controls that need improvement. Furthermore, to the extent our business grows, our internal controls may become more complex, and we would require significantly more resources to ensure our internal controls remain effective. If we or our independent auditors discover a material weakness, the disclosure of that fact, even if quickly remedied, could reduce the market value of the Company’s common stock. Additionally, the existence of any material weakness or significant deficiency would require management to devote significant time and incur significant expense to remediate any such material weaknesses or significant deficiencies and management may not be able to remediate any such material weaknesses or significant deficiencies in a timely manner.

We are subject to tax audits by various tax authorities in multiple jurisdictions.

From time to time we may be audited by tax authorities to whom we are subject. Any assessment resulting from such audits, if any, could result in material changes to our past or future taxable income, tax payable or deferred tax assets, and could require us to pay penalties and interest that could materially adversely affect our financial results.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

The Company is currently negotiating a new lease agreement for our facility in Rancho Cucamonga, California. This is our only facility and it includes our corporate offices, research and development laboratory and warehouse. Our lease on this facility expired in December 2020.

Item 3. Legal Proceedings

From time to time, we may become involved in various lawsuits and legal proceedings which arise in the ordinary course of business. The impact and outcome of litigation, if any, is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business. We are not currently aware of any such legal proceedings or claims to which we or our wholly owned subsidiary is a party or of which any of our property is subject that we believe will have, individually or in the aggregate, a material adverse effect on our business, financial condition or results of operations.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Information About Our Common Stock

Our common stock is approved for quotation on the OTC Markets’ OTCQB marketplace under the symbol “PURE.” The OTCQB is a regulated quotation service that displays real-time quotes, last-sale prices and volume information in over-the-counter equity securities. The OTCQB securities are traded by a community of market makers that enter quotes and trade reports. This market is limited in comparison to the national stock exchanges and any prices quoted may not be a reliable indication of the value of our common stock. Any over-the-counter market quotations reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not necessarily represent actual transactions

Holders

As of October 28, 2021, we had approximately 214 holders of record of our common stock. This does not include beneficial owners holding common stock in street name.

Dividend Policy

We have never paid dividends and have no current plans to do so. We currently anticipate that we will retain all of our future earnings, if any, for use in the development and expansion of our business and for general corporate purposes. Any determination to pay dividends in the future will be at the discretion of our Board and will depend upon our results of operations, financial condition and other factors that the Board, in its discretion, may deem relevant.

Repurchase of Equity Securities

None.

Information About Our Equity Compensation Plans

The information required under this heading is incorporated herein by reference to the applicable information set forth in Item 12 of this Annual Report on Form 10-K.

Item 6. Selected Financial Data

As a Smaller Reporting Company, as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

All references to “PURE,” “we,” “our,” “us” and the “Company” in this Item 7 refer to PURE Bioscience, Inc. and our wholly owned subsidiary.

The discussion in this section contains forward-looking statements. These statements relate to future events, our future operations or our future financial performance. We have attempted to identify forward-looking statements by terminology such as “anticipate,” “believe,” “can,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “potential,” “predict,” “should,” “would” or “will” or the negative of these terms or other comparable terminology, but their absence does not mean that a statement is not forward-looking. These statements are only predictions and involve known and unknown risks, uncertainties and other factors, which could cause our actual results to differ from those projected in any forward-looking statements we make. Several risks and uncertainties we face are discussed in more detail under “Risk Factors” in Part I, Item 1A of this Annual Report or in the discussion and analysis below. You should, however, understand that it is not possible to predict or identify all risks and uncertainties and you should not consider the risks and uncertainties identified by us to be a complete set of all potential risks or uncertainties that could materially affect us. You should not place undue reliance on the forward-looking statements we make herein because some or all of them may turn out to be wrong. We undertake no obligation to update any of the forward-looking statements contained herein to reflect future events and developments, except as required by law. The following discussion should be read in conjunction with the consolidated financial statements and the notes to those statements included elsewhere in this Annual Report on Form 10-K.

Overview

We are focused on developing and commercializing proprietary antimicrobial products that provide safe and cost-effective solutions to the health and environmental challenges of pathogen and hygienic control. Our technology platform is based on patented stabilized ionic silver, and our initial products contain silver dihydrogen citrate, or SDC. SDC is a broad-spectrum, non-toxic antimicrobial agent, which offers 24-hour residual protection and formulates well with other compounds. As a platform technology, we believe SDC is distinguished from existing products in the marketplace because of its superior efficacy, reduced toxicity, non-causticity and the inability of bacteria to form a resistance to it.

We believe there is a significant market opportunity for our safe, non-toxic, non-caustic and effective SDC-based solutions. We currently offer PURE^® Hard Surface as a food contact surface sanitizer and disinfectant to restaurant chains, food processors and food transportation companies. We also offer PURE Control^® as a direct food contact processing aid. In addition to our direct sales efforts with PURE Hard Surface and PURE Control, we market and sell our SDC-based products indirectly through third-party distributors supporting various industries.

Financial Overview

This financial overview provides a general description of our revenue and expenses.

Net Product Sales

We contract manufacture and sell SDC-based products for end use, and as a raw material for manufacturing use. We recognize revenue when we satisfy a performance obligation by transferring control of the promised goods or services to our customers, in an amount that reflects the consideration we expect to be entitled to in exchange for those goods or services. Any amounts received prior to satisfying revenue recognition criteria are recorded as deferred revenue. See “Critical Accounting Policies and Estimates – Revenue Recognition”.

Cost of Goods Sold

Cost of goods sold for product sales includes direct and indirect costs to manufacture products, including materials consumed, manufacturing overhead, shipping costs, salaries, benefits, reserved inventory, and related expenses of operations. Depreciation related to manufacturing is systematically allocated to inventory produced, and expensed through cost of goods sold at the time inventory is sold.

Selling, General and Administrative

Selling, general and administrative expense consists primarily of salaries and other related costs for personnel in business development, sales, finance, accounting, information technology, and executive functions. Other selling, general and administrative costs include product marketing, advertising, and trade show costs, as well as public relations and investor relations, facility costs, and legal, accounting and other professional fees.

Research and Development

Our research and development activities are focused on leveraging our technology platform to develop additional proprietary products and applications. Research and development expense consists primarily of personnel and related costs, product registration expenses, and third-party testing. We expense research and development costs as incurred.

Other Income (Expense)

We record interest income, interest expense, the change in derivative liabilities, as well as other non-operating transactions, as other income (expense) in our consolidated statements of operations.

COVID-19

The COVID-19 pandemic has led to severe disruptions in general economic activities, as businesses and federal, state, and local governments take increasingly broad actions to mitigate this public health crisis. While we have experienced some delays related to final third-party validation of certain of our products and product rollouts by customers using PURE Control, we have not experienced a material disruption to our business. In addition, we previously benefited from increased demand from our customers for our PURE Hard Surface product due to a focus on surface disinfecting in response to attempting to prevent COVID-19 transmission. We subsequently experienced an abatement in such demand and cannot assure you that demand will stabilize. Additionally, we are beginning to experience supply chain issues with our various plastic packaging configurations and citric acid. Further, on a go-forward basis, we cannot guarantee the overall economic conditions will not affect our business, as these conditions may significantly negatively impact all aspects of our business. Our business is dependent on the continued health and productivity of our employees, including our sales staff and corporate management team.

Additionally, our liquidity could be negatively impacted if these conditions continue for a significant period of time and we may be required to pursue additional sources of financing to obtain working capital, maintain appropriate inventory levels, and meet our financial obligations. Currently, capital and credit markets have been disrupted by the crisis and our ability to obtain any required financing is not guaranteed and largely dependent upon evolving market conditions and other factors. Depending on the continued impact of the crisis, further actions may be required to improve our cash position and capital structure.

The extent to which the COVID-19 pandemic ultimately impacts our business, sales, results of operations and financial condition will depend on future developments, which are highly uncertain and cannot be predicted, including, but not limited to, the duration and spread of the outbreak, its severity, the actions to contain the virus or treat its impact, and how quickly and to what extent normal economic and operating conditions resume and, more specifically, the effect it has on our customers and suppliers. Even after the COVID-19 pandemic has subsided, we may experience significant impacts to our business as a result of its global economic impact, including any economic downturn or recession that has occurred or may occur in the future. See the section titled “Risk Factors - The currently evolving situation related to the COVID-19 pandemic could adversely affect our business, financial condition and results of operations.”

Results of Operations – Comparison of the Years Ended July 31, 2021 and 2020

Fluctuations in Operating Results

Our results of operations have fluctuated significantly from period to period in the past and are likely to continue to do so in the future. We anticipate that our results of operations will be affected for the foreseeable future by several factors that may contribute to these periodic fluctuations, including fluctuations in the buying patterns of our current or potential customers for which we have no visibility, the mix of product sales including a change in the percentage of higher or lower margin formulations and packaging configurations of our products, the cost of product sales including component costs, our inability for any reason to be able to meet demand, the achievement and timing of research and development and regulatory milestones, unforeseen changes in expenses, including non-cash expenses such as the fair value of equity awards granted and the fair value change of derivative liabilities, the calculation of which includes several variable assumptions, and unforeseen manufacturing or supply issues, among other issues. Due to these fluctuations, we believe that the period-to-period comparisons of our operating results are not a reliable indication of our future performance. As of the date of this filing, we are not aware of any trends in these factors or events or conditions that we believe are reasonably likely to impact our results of operations in the future.

Net Product Sales

Net product sales were $3,698,000 and $6,917,000 for the years ended July 31, 2021 and 2020, respectively. During the fourth quarter of the prior year the Company experienced a significant increase in sales due to the onset of the COVID-19 pandemic. As a result, our year-over-year product revenue decreased by $3,219,000. The decrease was attributable to decreased sales across our distribution network servicing the food processing, transportation and janitorial industry. Our top three customers accounted for $1,560,000 of net product sales for the year ended July 31, 2021.

For the year ended July 31, 2021, one customer accounted for 11% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. There were no foreign sales during the fiscal year ended July 31, 2021.

For the year ended July 31, 2020, three individual customers accounted for 16%, 13% and 11% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 98% U.S. and 2% foreign.

During the fiscal year ended July 31, 2021, we recognized $229,000 in royalties from a nonexclusive third-party distributor.

Cost of Goods Sold

Cost of goods sold was $1,852,000 and $2,896,000 for the years ended July 31, 2021 and 2020, respectively. The decrease of $1,044,000 was primarily attributable to decreased product sales.

Gross margin, as a percentage of net product sales, was 50% and 58% for the years ended July 31, 2021 and 2020, respectively. The decrease in gross margin percentage was primarily attributable to the sale of higher margin formulations and packaging configurations of our products during the fiscal year ended July 31, 2020 as compared with the current year.

Selling, General and Administrative Expense

Selling, general and administrative expense was $4,047,000 and $3,695,000 for the years ended July 31, 2021 and 2020, respectively. The increase of $352,000 was primarily attributable to increased personnel costs, facilities expenses, as well as, increased board fees and share-based compensation. These increases were partially offset by decreased professional service costs and legal fees.

Share-based compensation expense included in selling, general and administrative expense, was $841,000 and $787,000 for the fiscal year ended July 31, 2021 and 2020, respectively. The increase of $54,000 is primarily due to the current year vesting of stock options and restricted stock units granted to employees, directors and consultants supporting our selling, general and administrative functions.

Research and Development Expense

Research and development expense was $339,000 and $322,000 for the years ended July 31, 2021 and 2020, respectively. The increase of $17,000 was primarily attributable to increased third-party testing and research supporting our FDA approval efforts.

Modified EBITDA

In addition to our GAAP results, we present Modified EBITDA as a supplemental measure of our performance. However, Modified EBITDA is not a recognized measurement under GAAP and should not be considered as an alternative to net income, income from operations or any other performance measure derived in accordance with GAAP, or as an alternative to cash flow from operating activities as a measure of liquidity. We define Modified EBITDA as net income (loss), plus interest expense, depreciation and amortization and stock-based compensation expense.

Management considers our core operating performance to be that which our managers can affect in any particular period through their management of the resources that affect our underlying revenue and profit generating operations during that period. Non-GAAP adjustments to our results prepared in accordance with GAAP are itemized below. You are encouraged to evaluate these adjustments and the reasons we consider them appropriate for supplemental analysis. In evaluating Modified EBITDA, you should be aware that in the future we may incur expenses that are the same as or similar to some of the adjustments in this presentation. Our presentation of Modified EBITDA should not be construed as an inference that our future results will be unaffected by unusual or non-recurring items.

Set forth below is a reconciliation of net loss to Modified EBITDA for the fiscal year ended July 31, 2021 and 2020:

We present Modified EBITDA because we believe it assists investors and analysts in comparing our performance across reporting periods on a consistent basis by excluding items that we do not believe are indicative of our core operating performance. In addition, we use Modified EBITDA in developing our internal budgets, forecasts and strategic plan; in analyzing the effectiveness of our business strategies in evaluating potential acquisitions; making compensation decisions; and in communications with our board of directors concerning our financial performance. Modified EBITDA has limitations as an analytical tool, which includes, among others, the following:

Liquidity and Capital Resources

As of July 31, 2021, we had $2,465,000 in cash and cash equivalents compared with $3,914,000 in cash and cash equivalents as of July 31, 2020. The net decrease in cash and cash equivalents was primarily attributable to the use of cash to fund our operations and investments in property, plant and equipment. Additionally, as of July 31, 2021, we had $970,000 of current liabilities, including $593,000 in accounts payable, compared with $1,512,000 of current liabilities, including $1,344,000 in accounts payable as of July 31, 2020. The net decrease in current liabilities was primarily due to trade payables due to our contract manufacture.

We have a history of recurring losses, and as of July 31, 2021 we have incurred a cumulative net loss of $125,800,000. During the fiscal year ended July 31, 2021, we recorded a net loss of $2,319,000 on recorded net revenue of $3,927,000. In addition, during the year ended July 31, 2021 we used $1,688,000 in operating and investing activities resulting in a cash balance of $2,390,000 as of July 31, 2021. Our history of recurring operating losses, and negative cash flows from operating activities give rise to substantial doubt regarding our ability to continue as a going concern. The financial statements do not include any adjustments to reflect the possible future effects on the recoverability and classification of assets or the amounts and classifications of liabilities that may result from our possible inability to continue as a going concern.

Our future capital requirements depend on numerous forward-looking factors. These factors may include, but are not limited to, the following: the acceptance of, and demand for, our products; our success and the success of our partners in selling our products; our success and the success of our partners in obtaining regulatory approvals to sell our products; the costs of further developing our existing products and technologies; the extent to which we invest in new product and technology development; and the costs associated with the continued operation, and any future growth, of our business. The outcome of these and other forward-looking factors will substantially affect our liquidity and capital resources.

Until we can continually generate positive cash flow from operations, we will need to continue to fund our operations with the proceeds of offerings of our equity and debt securities. However, we cannot assure you that additional financing will be available when needed or that, if available, financing will be obtained on terms favorable to us or to our stockholders. If we raise additional funds from the issuance of equity securities, substantial dilution to our existing stockholders would likely result. If we raise additional funds by incurring debt financing, the terms of the debt may involve significant cash payment obligations as well as covenants and specific financial ratios that may restrict our ability to operate our business.

Critical Accounting Policies and Estimates

The discussion and analysis of our financial condition and results of operations are based on our audited consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States, or GAAP. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses, and related disclosures. We evaluate our estimates on an ongoing basis. We base our estimates on historical experience and on other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following accounting policies and estimates are critical to aid you in understanding and evaluating our reported financial results.

Revenue Recognition

Effective August 1, 2018, we adopted the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”), Topic 606, Revenue from Contracts with Customers (“Topic 606”). Under Topic 606, revenue is recognized at an amount that reflects the consideration to which we expect to be entitled in exchange for transferring goods or services to a customer. This principle is applied using the following 5-step process:

Under Topic 606, we recognize revenue when we satisfy a performance obligation by transferring control of the promised goods or services to our customers, in an amount that reflects the consideration we expect to be entitled to in exchange for those goods or services.

Our technology platform is based on patented stabilized ionic silver, and our initial products contain silver dihydrogen citrate, or SDC. SDC is a broad-spectrum, non-toxic antimicrobial agent, which offers 24-hour residual protection and formulates well with other compounds. We sell various configurations and dilutions of SDC direct to customers and through distributors. We currently offer PURE^® Hard Surface as a food contact surface sanitizer and disinfectant to restaurant chains, food processors and food transportation companies. We also offer PURE Control^® as a direct food contact processing aid.

Contract terms for unit price, quantity, shipping and payment are governed by sales agreements and purchase orders which we consider to be a customer’s contract in all cases. The unit price is considered the observable stand-alone selling price for the arrangements. Any promotional or sales discounts are applied evenly to the units sold for purposes of calculating standalone selling price.

Product sales generally consist of a single performance obligation that we satisfy at a point in time. We recognize product revenue when the following events have occurred: (a) we have transferred physical possession of the products, (b) we have a present right to payment, (c) the customer has legal title to the products, and (d) the customer bears significant risks and rewards of ownership of the products.

Our direct customer and distributer sales are invoiced based on received purchase orders. Our payment terms on invoiced direct customer and distributor sales range between 30 and 90 days after we satisfy our performance obligation. The majority of our customers are on 30 day payment terms. We currently offer no right of return on invoiced sales and maintain no allowance for sales returns.

Shipping and handling are treated as activities to fulfill promises to customers and any amounts billed to a customer, if applicable, represent revenues earned for the goods provided. Costs related to such shipping and handling billings are classified as cost of sales.

We do not have significant categories of revenue that may impact how the nature, amount, timing and uncertainty of revenue and cash flows are affected by economic factors.

Variable Consideration

We record revenue from customers in an amount that reflects the transaction price we expect to be entitled to after transferring control of those goods or services. From time to time, we offer sales promotions on our products such as discounts. Variable consideration is estimated at contract inception only to the extent that it is probable that a significant reversal of revenue will not occur.

Share-Based Compensation

We grant equity-based awards under share-based compensation plans. We estimate the fair value of share-based payment awards using the Black-Scholes option valuation model. This fair value is then amortized over the requisite service periods of the awards. The Black-Scholes option valuation model requires the input of subjective assumptions, including price volatility of the underlying stock, risk-free interest rate, dividend yield, and expected life of the option. Share-based compensation expense is based on awards ultimately expected to vest, and therefore is reduced by expected forfeitures. Changes in assumptions used under the Black-Scholes option valuation model could materially affect our net loss and net loss per share.

Impairment of Long-Lived Assets

In accordance with GAAP, if indicators of impairment exist, we assess the recoverability of the affected long-lived assets by determining whether the carrying value of such assets can be recovered through undiscounted future operating cash flows. If impairment is indicated, we measure the amount of such impairment by comparing the carrying value of the asset to the fair value of the asset and we record the impairment as a reduction in the carrying value of the related asset and a charge to operating results. Estimating the undiscounted future cash flows associated with long-lived assets requires judgment, and assumptions could differ materially from actual results. There were no patent impairments during the fiscal years ended July 31, 2021 or 2020.

For purposes of testing impairment, we group our long-lived assets at the lowest level for which there are identifiable cash flows independent of other asset groups. Currently, there is only one level of aggregation for our intangible assets. We assess the impairment of long-lived assets, consisting of property, plant, equipment and finite-lived intangible assets primarily consisting of the worldwide patent portfolio of our silver ion technologies, annually, or whenever events or circumstances indicate that the carrying value may not be recoverable. Examples of such events or circumstances include:

Additionally, on a quarterly basis we review the significant assumptions underlying our impairment assessment to determine that our previous conclusions remain valid. As part of our review, we consider changes in revenue growth rates, operating margins, working capital needs and other expenditures. With the exception of the impairment discussed above we have not identified any asset groups where undiscounted cash flows were not substantially in excess of carrying value.

Recoverability of assets to be held and used in operations is measured by a comparison of the carrying amount of an asset to the future net cash flows expected to be generated by the assets. The factors used to evaluate the future net cash flows, while reasonable, require a high degree of judgment and the results could vary if the actual results are materially different than the forecasts. In addition, we base useful lives and amortization or depreciation expense on our subjective estimate of the period that the assets will generate revenue or otherwise be used by us. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are reported at the lower of the carrying amount or fair value less selling costs.

We also periodically review the lives assigned to our intangible assets to ensure that our initial estimates do not exceed any revised estimated periods from which we expect to realize cash flows from the technologies. If a change were to occur in any of the above-mentioned factors or estimates, the likelihood of a material change in our reported results would increase.

Recent Accounting Pronouncements

Information regarding recent accounting pronouncements is contained in Note 2 to the Consolidated Financial Statements, included elsewhere in this report.

Off Balance Sheet Arrangements

We do not have any off balance sheet arrangements.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

As a Smaller Reporting Company as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

Item 8. Financial Statements and Supplementary Data

The consolidated financial statements and supplementary data required by this Item 8 are set forth at the end of this Annual Report.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our Principal Executive Officer and Principal Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives.

As required by Rule 13a-15(e) under the Exchange Act, our management conducted an evaluation, under the supervision and with the participation of our Principal Executive Officer and our Principal Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of the end of the period covered by this Annual Report. Based on the foregoing evaluation, our principal executive officer and principal financial officer concluded that as of the end of the period covered by this report our disclosure controls and procedures were effective.

Changes in Our Internal Controls over Financial Reporting

There were no changes in our internal controls over financial reporting during our most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect our internal controls over financial reporting.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Exchange Act Rules 13a-15(f) and 15d-15(f). With the participation of our Principal Executive Officer and Principal Financial Officer, management conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on its evaluation under this framework, our management concluded that our internal control over financial reporting was effective as of July 31, 2021.

Inherent Limitations on Effectiveness of Controls

Our management, including our Principal Executive Officer and Principal Financial Officer, do not expect that our disclosure controls or our internal control over financial reporting will prevent or detect all error and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. The design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of any evaluation of controls effectiveness to future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.

Item 9B. Other Information

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance

Information Regarding Our Board of Directors

Pursuant to our bylaws, the number of directors is fixed and may be increased or decreased from time to time by resolution of our Board of Directors, or the Board. The Board has fixed the number of directors at five members.

Information with respect to our directors as of October 28, 2021 is shown below.

Tom Y. Lee, CPA was appointed to our Board on October 24, 2014 and, effective August 7, 2019, appointed as our President and Chief Executive Officer. Mr. Lee is currently the Chairman and CEO of Swabplus, Inc., a contract manufacturer of single-dose applicator and formulation OEM products, and has served as Chairman and CEO since 2008. Mr. Lee has experience in manufacturing and selling applicator and formulation OEM products, manufacturing and distributing products in Asia and is experienced in accounting matters. Mr. Lee was formerly audit committee chairman at First Continental Bank (which merged with United Commercial Bank in 2003). Mr. Lee has been an active CPA since 1983 and earned his Master of Science in accounting from California State University Long Beach and his Bachelors in Business Administration from TamKang University in Taipei, Taiwan.

We believe Mr. Lee is qualified to serve on our Board due to his role as President and Chief Executive Officer of the Company and his leadership experience in manufacturing, distributing and selling products.

Ivan Chen was appointed to our Board on June 29, 2018. Mr. Chen, an attorney and entrepreneur, brings extensive experience in the healthcare and technology industries, with deep legal and strategic experience in areas including licensing, joint ventures, mergers & acquisitions, securities and corporate governance, and has been admitted to the bar in the states of California and New York. His experience includes serving as Director, Mergers & Acquisitions at eBay, Inc., a publicly-traded e-commerce platform. In this role, he led the negotiation and execution of numerous US and cross-border transactions. Prior to eBay, Mr. Chen focused on transactional, securities, and corporate governance matters while serving as an associate at Morrison & Foerster LLP and at Skadden, Arps, Meagher & Flom LLP, both large international law firms. Mr. Chen earned a J.D. from Harvard Law School, a master’s degree from the University of Cambridge, and a bachelor’s degree from Northwestern University.

We believe that Mr. Chen is qualified to serve on our Board due to his experience in the healthcare and technology industries and his legal and strategic experience.

Mr. Myers was appointed to our Board on January 20, 2021. Mr. Myers was appointed as our Chief Operating Officer on October 4, 2018 had been serving as the Company’s Executive Vice President, Technical Support and Services since September 2016 and had previously served as Executive Vice President, Marketing and Product Development since August 2011 when he joined the Company. In his previous role, Mr. Myers led the implementation and application of the Company’s SDC-based technology in customer facilities, the development of the Company’s food transport sanitation solution and other marketing and sales efforts. Prior to joining the Company, Mr. Myers served as the President and Principal of Idaho Milk Products. Mr. Myers has also held executive management roles at Weider Nutrition International, Puritan Quartz Pharmaceuticals, FruitSource Associates and FruitSource Confections, Nancy’s Specialty Foods, Izaki Glico and Berkshire Hathaway Corporation. Mr. Myers holds a Bachelor of Science degree from California State University Long Beach.

We believe that Mr. Myers is qualified to serve on our Board due to his executive leadership experience as the Company’s Chief Operating Officer and his experience in building and growing the Company’s technology.

Kristin A. Taylor was appointed to our Board on January 20, 2021. Ms. Taylor is an accomplished technology executive with over 20 years of experience that includes VP and Director roles at leading tech companies. In March of 2020, Ms. Taylor was named President and CEO of ImageWare Systems, a software SaaS leader in biometric identification and authentication for state, local, federal governments, including law enforcement/public safety, as well as commercial businesses in the financial, healthcare, education, manufacturing and call center verticals. Prior to serving as President and Chief Executive Officer of ImageWare Systems, Inc., Kristin was a strategy consultant providing advisory services on communications, marketing, and analyst relations for Veritas Lux and Kristin A Taylor Consulting in which she developed a proprietary algorithmic methodology to weigh and rank the most influential global technical analysts. From September of 2017 to April of 2019, Ms. Taylor served as Vice President of Worldwide Analyst Relations at IBM and led the efforts to modernize and transform IBM’s Analyst Relations organization to drive not only influence but materialize revenue. From August of 2013 to August of 2017, she served as Vice President, Global Analyst and Public Relations at MediaTek, the third largest fabless semiconductor company worldwide with a $30 billion market cap, where she led the buildout of a new global Public and Analyst Relations organization to penetrate the North American, European, Latin American, Russian and Indian markets. Prior to that from September of 1998 to December of 2010, she served in various positions of increasing responsibility with Qualcomm including Head of Industry Analyst Relations, Senior Director of Business Development, and as a Director in Information Technology. During her tenure with Qualcomm, she drove development and launched the world’s first embedded wireless WAN module inside of notebook computers that resulted in the creation of a new corporate division for computing, with Gobi becoming a core element of 300+ product offerings. In October of 2020, she was named to the Top 50 Women Leaders in SaaS by The Software Report. In November of 2020, she was named Chair of Board for ImageWare Systems. She earned degrees in Business Management and Sociology from the University of New Hampshire in Durham, New Hampshire.

We believe that Ms. Taylor is qualified to serve on our Board due to her experience in Fortune 500 and micro-cap businesses along with her insight in sales, business development, analyst and public relations, marketing, and go-to-market strategies.

David M. Rendall was appointed to our Board on January 20, 2021. Mr. Rendall is an attorney and licensed real estate broker in the state of California. Mr. Rendall has been the broker and owner of RE/MAX of Santa Clarita, RE/MAX of Valencia, and RE/MAX Gateway since February 2014. Mr. Rendall manages approximately 175 agents and has annual sales of about $1 billion. He is the owner of Group One Investments, Inc. a licensed real estate property management and real estate investment firm specializing in commercial management and real estate syndication and development. He currently sits on the Santa Clarita Valley Economic Development Corporation board and is the Chief Executive Officer of Escrow Advantage, Inc., an independent escrow company. Mr. Rendall also is the general partner, owner, president, managing member, and/or member of multiple businesses and real estate partnerships. In addition to his real estate companies he is the Principal and Partner of Group One Legal, PC. Mr. Rendall has been practicing real estate since 2001 and has been practicing law since admitted to the state bar of California in 2003. Mr. Rendall earned a J.D. from Loyola Law School, a bachelor’s degree in Political Science and Sociology from University of California, Los Angeles, and was an adjunct professor at College of the Canyons, and taught Real Estate Principals, Real Estate Practices, and Legal Aspects of Real Estate.

We believe that Mr. Rendall is qualified to serve on our Board due to his substantial managerial and business expertise and insight into specific areas of sales and marketing necessary to provide leadership to the Company through various stages of potential development and growth. In addition, the Board values his legal expertise.

Information Regarding Our Executive Officers

Information with respect to our executive officers as of October 8, 2020 is shown below. Since Tom Y. Lee and Tom Myers also serve on the Board, their biographies are set forth under “Information Regarding the Board of Directors” above.

Mark Elliott was appointed as our Vice President Finance and Principal Financial and Accounting Officer on July 31, 2015. Mr. Elliott joined the Company in 2004 and has been responsible for managing all accounting and regulatory reporting activities since he was promoted to Controller in May 2006. He has also been responsible for establishing all current financial and reporting systems. Prior to joining the Company, Mr. Elliott worked in government accounting. He earned a Bachelor of Science, Business Administration-Accountancy at California State University-San Marcos.

Family Relationships

Mr. Ivan Chen is the nephew of Mr. Tom Y. Lee. There are no other family relationships between any current director executive officer, or any director or executive offer during the fiscal year ended July 31, 2021.

Corporate Governance

Overview

We are committed to maintaining high standards of business conduct and corporate governance, which we believe are fundamental to the overall success of our business, serving our stockholders well and maintaining our integrity in the marketplace. Our Corporate Governance Guidelines and Code of Business Conduct and Ethics, together with our Certificate of Incorporation, Bylaws and the charters of our Board Committees, form the basis for our corporate governance framework. As discussed below, our Board of Directors has established two standing committees to assist it in fulfilling its responsibilities to the Company and its stockholders: the Audit Committee and the Compensation Committee. The Board of Directors performs the functions typically assigned to a Nominating and Corporate Governance Committee.

Corporate Governance Guidelines

Our Corporate Governance Guidelines are designed to ensure effective corporate governance of our Company. Our Corporate Governance Guidelines cover topics including, but not limited to, director qualification criteria, director responsibilities, director compensation, director orientation and continuing education, communications from stockholders to the Board, succession planning and the annual evaluations of the Board and its Committees. Our Corporate Governance Guidelines are reviewed regularly by the Board and revised when appropriate. The full text of our Corporate Governance Guidelines can be found in the “Corporate Governance” section of our website accessible at www.purebio.com. A printed copy may also be obtained by any stockholder upon request to our Corporate Secretary.

Code of Business Conduct and Ethics

We have adopted a Code of Business Conduct and Ethics that applies to all of our employees, officers and directors. This Code constitutes a “code of ethics” as defined by the rules of the SEC. This Code also contains “whistle blower” procedures adopted by our Audit Committee regarding the receipt, retention and treatment of complaints related to accounting, internal accounting controls or auditing matters and procedures for confidential anonymous employee complaints related to questionable accounting or auditing matters. Copies of the code may be obtained free of charge from our website, www.purebio.com. Any amendments to, or waivers from, a provision of our code of ethics that applies to any of our executive officers will be posted on our website in accordance with the rules of the SEC. Other than as specifically referenced herein, the information contained on, or that can be accessed through, our website is not a part of this Report.

Director Independence

We are not currently listed on any national securities exchange or in an inter-dealer quotation system that has established a standard for independence. However, in evaluating the independence of our members and the composition of the committees of our Board of Directors, our Board utilizes the definition of “independence” as that term is defined by applicable listing standards of the NYSE MKT. As of the date hereof, our Board consists of three members, two of whom are considered independent as that term is defined by applicable listing standards of the NYSE MKT. Our independent directors include: Messrs. Chen and Rendall and Ms. Taylor.

Board and Committee Attendance

During the fiscal year ended July 31, 2021, the Board of Directors met two times and it took action by unanimous written consent two times. During the fiscal year ended July 31, 2021 our Audit Committee met four times. Each of the directors attended 100% of the meetings of the Board of Directors.

Director Attendance at Annual Meeting

We believe the annual meeting of stockholders provides a good opportunity for our directors to hear any feedback the stockholders may share with the Company at the meeting. As a result, we encourage our directors to attend our annual meeting. We reimburse our directors for the reasonable expenses incurred by them in attending the annual meeting.

Executive Sessions

Executive sessions of our independent directors are held at each regularly scheduled meeting of our Board and at other times as necessary and are chaired by the Chairman of the Board. The Board’s policy is to hold executive sessions without the presence of management, including our President and Chief Executive Officer, who is the only non-independent director on the Board. Our Board Committees also generally meet in executive session at the end of each committee meeting.

Board Committees

Compensation Committee. The Compensation Committee of the Board of Directors currently consists of Messrs. Chen (Chair) and Rendall and Ms. Taylor. The functions of the Compensation Committee include the approval of the compensation offered to our executive officers and recommending to the full Board of Directors the compensation to be offered to our directors, including our Chairman. The Board has determined that Messrs. Chen and Rendall and Ms. Taylor are each an “independent director” under the listing standards of the NYSE MKT. In addition, the members of the Compensation Committee qualify as a “non-employee directors” for purposes of Rule 16b-3 under the Exchange Act and as an “outside director” for purposes of Section 162(m) of the Internal Revenue Code of 1986, as amended. The Compensation Committee is governed by a written charter approved by the Board of Directors, a copy of which is available on our website at www.purebio.com.

Audit Committee. The Audit Committee of the Board of Directors, currently consists of Messrs. Chen (Chair) and Rendall and Ms. Taylor. The functions of the Audit Committee include the retention of our independent registered public accounting firm, reviewing and approving the planned scope, proposed fee arrangements and results of the Company’s annual audit, reviewing the adequacy of the Company’s accounting and financial controls and reviewing the independence of the Company’s independent registered public accounting firm. The Board has determined that Messrs. Chen and Rendall and Ms. Taylor are “independent director” under the listing standards of the NYSE MKT. The Board of Directors has also determined that Messrs. Chen and Rendall and Ms. Taylor are each an “audit committee financial expert” within the applicable definition of the SEC. The Audit Committee is governed by a written charter approved by the Board of Directors, a copy of which is available on our website at www.purebio.com.

Nominating Committee. The Board has not established a Nominating Committee, and as a result performs the functions typically assigned to a Nominating Committee, including the identification, recruitment and nomination of candidates for the Board and its committees, determining the structure, composition and functioning of the Board and its committees including the reporting channels through which the Board receives information and the quality and timeliness of the information, developing and recommending to the Board corporate governance guidelines applicable to the Company and annually reviewing and recommending changes, as necessary or appropriate, overseeing the annual evaluation of the Board’s effectiveness and performance.

Board and Committee Effectiveness

The Board and each of its Committees performs an annual self-assessment to evaluate their effectiveness in fulfilling their obligations. The Board and Committee evaluations cover a wide range of topics, including, among others, the fulfillment of the Board and Committee responsibilities identified in the Corporate Governance Guidelines and charters for each Committee.

Board Leadership Structure

Our Bylaws provide our Board with flexibility to combine or separate the positions of Chairman of the Board and Chief Executive Officer in accordance with its determination that utilizing one or the other structure would be in the best interests of our company. At the current time, Mr. Chen serves as our Chairman of the Board, and Mr. Lee serves as our Chief Executive Officer. Our Board believes our leadership structure enhances the accountability of our Chief Executive Officer to the Board and encourages balanced decision making. In addition, the Board believes that this structure provides an environment in which its independent directors are fully informed, have significant input into the content of Board meetings and are able to provide objective and thoughtful oversight of management. Our Board also separated the roles in recognition of the differences in responsibilities. While our Chief Executive Officer is responsible for the day-to-day leadership of the Company and its business operations, the Chairman of the Board provides guidance to the Board, sets the agenda for Board meetings and presides over the meetings of the full Board and the meetings of the Board’s non-management directors. The Board Chairman also provides performance feedback on behalf of the Board to our Chief Executive Officer. The Board intends to carefully evaluate from time to time whether our Chief Executive Officer and Chairman positions should remain separate based on what the Board believes is best for the Company and its stockholders.

Board Oversight of Risk

The Board is actively involved in the oversight of risks that could affect the Company. The Board as a whole has responsibility for risk oversight of the Company’s risk management policies and procedures, with reviews of certain areas being conducted by the relevant Board committee. The Board satisfies this responsibility through reports by each Committee Chair regarding the Committee’s considerations and actions, as well as through regular reports directly from management responsible for oversight of particular risks within the Company. Specifically, the Board committees address the following risk areas:

The Board as a whole considers risks related to regulatory and compliance matters as well as risks related to the Company’s sales and marketing and research and development initiatives.

The Board encourages management to promote a corporate culture that incorporates risk management into the Company’s day-to-day business operations.

Stockholder Recommendations for Director Nominees

In nominating candidates for election as a director, the Board will consider a reasonable number of candidates recommended by a single stockholder who has held over 20% of PURE Bioscience Common Stock for over one year and who satisfies the notice, information and consent provisions set forth in our Bylaws and Corporate Governance Guidelines. Stockholders who wish to recommend a candidate may do so by writing to the Board of Directors in care of the Corporate Secretary, PURE Bioscience, Inc., 9669 Hermosa Avenue, Rancho Cucamonga, California 91730. The Board of Directors will use the same evaluation process for director nominees recommended by stockholders as it uses for other director nominees. A printed copy of our Bylaws may be obtained by any stockholder upon request to our Corporate Secretary.

Identification and Evaluation of Director Nominees

In evaluating nominees for membership on our Board, our Board applies the Board membership criteria set forth in our Corporate Governance Guidelines. Under these criteria, the Board takes into account many factors, including an individual’s business experience and skills (including skills in core areas such as operations, management, technology, accounting and finance, strategic planning and international markets), as well as independence, judgment, knowledge of our business and industry, professional reputation, leadership, integrity and ability to represent the best interests of the Company’s stockholders. In addition, the Board also considers the ability to commit sufficient time and attention to the activities of the Board, as well as the absence of any potential conflicts with the Company’s interests. The Board does not assign specific weights to particular criteria and no particular criterion is necessarily applicable to all prospective nominees. The Board does not have a formal policy with respect to diversity of nominees. Rather, our Board considers Board membership criteria as a whole and seeks to achieve diversity of occupational and personal backgrounds on the Board.

Our Board regularly assesses the appropriate size of our Board, and whether any vacancies on our Board are expected due to retirement or otherwise. In the event that vacancies are anticipated, or otherwise arise, the Board will consider various potential candidates who may come to the attention of the Board through current Board members, professional search firms, stockholders or other persons. Each candidate brought to the attention of the Board, regardless of who recommended such candidate, is considered on the basis of the criteria set forth in our corporate governance guidelines. As stated above, our Board will consider candidates proposed for nomination by our significant stockholders. Stockholders may propose candidates by submitting the names and supporting information to: Corporate Secretary, PURE Bioscience, Inc., 9669 Hermosa Avenue, Rancho Cucamonga, California 91730. Supporting information should include (a) the name and address of the candidate and the proposing stockholder, (b) a comprehensive biography of the candidate and an explanation of why the candidate is qualified to serve as a director taking into account the criteria identified in our corporate governance guidelines, (c) proof of ownership, the class and number of shares, and the length of time that the shares of our voting securities have been beneficially owned by each of the candidate and the proposing stockholder, and (d) a letter signed by the candidate stating his or her willingness to serve, if elected.

Item 11. Executive Compensation

Summary Compensation Table

The following table sets forth a summary of cash and non-cash compensation awarded, earned or paid for services rendered to us during the fiscal years ended July 31, 2021 and July 31, 2020 by our named executive officers, consisting of (i) each individual serving as principal executive officer during the fiscal year ended July 31, 2021 and (ii) our other two most highly compensated officers serving during the fiscal year ended July 31, 2021.

Narrative to Summary Compensation Table

The compensation program established for the Company’s executive officers consisted of the following elements:

Base Salary: The base salaries of our named executive officers depend on their job responsibilities, the market rate of compensation paid by companies in our industry for similar positions, our financial position and performance, and the strength of our business. Base salaries provide a fixed means of compensation in order to attract and retain talent. Mr. Lee received no base salary as Chief Executive Officer during the fiscal year ended July 31, 2021. Mr. Elliott’s salary was $162,000 per year during the fiscal year ended July 31, 2021. The base salary for Mr. Myers was $200,000 per year during the fiscal year ended July 31, 2021.

Performance-Based Cash Awards: As part of the Company’s executive compensation program, our executive officers are eligible to receive performance-based cash awards. The annual performance-based cash awards are based on the executive officer’s individual performance and the Company’s actual performance compared to the corporate goals approved by the Board and the Compensation Committee. Following the end of each fiscal year, the Board and the Compensation Committee is responsible for determining the bonus amount payable to an executive officer based on that executive officer’s individual performance during the fiscal year and its determination of the Company’s actual performance compared to the corporate goals established for that fiscal year. Due to the Company’s limited financial resources and performance, our named executive officers did not receive any performance-based cash bonuses for the years ended July 31, 2021 and 2020.

Long-Term Equity Awards: Equity ownership by our executive officers and key employees encourages them to create long-term value and aligns their interests with those of our stockholders. As a result, our executive compensation program provides for the issuance of stock options and restricted stock units (“RSUs”) as determined by the Compensation Committee and our Board.

Outstanding Equity Awards at Year-End

The following table provides a summary of all equity awards held by our named executive officers that were outstanding as of July 31, 2021.

During the year ended July 31, 2021, Messrs. Lee, Myers and Elliott had 400,000, 187,500 and 225,000 option awards vest, respectively. The respective value on vesting was $13,500, $5,625 and $6,750 respectively.

Code Section 162(m) Provisions

Section 162(m) of the U.S. Internal Revenue Code, or the Code, generally disallows a tax deduction to public companies for compensation in excess of $1 million paid to the Chief Executive Officer or any of the four most highly compensated officers. Prior to changes in tax law taking effect in 2018, there was an exception to the $1.0 million limitation for performance-based compensation, including stock options, meeting certain requirements. Before such amendments we had not adopted a policy that all compensation must qualify as deductible under Section 162(m) of the Code. The exemption from the Section 162(m) deduction limit for performance-based compensation has been repealed, effective for taxable years beginning after December 31, 2017, such that compensation paid to our Chief Executive Officer and certain other executive officers in excess of $1.0 million will not be deductible unless it qualifies for transition relief applicable to certain arrangements in place as of November 2, 2017.

Compensation of Directors

The following table sets forth compensation earned in the fiscal year ended July 31, 2021 by each of our non-employee directors who are not named executive officers.

Narrative to Director Compensation Table

Each non-employee director of the Company receives cash fees from the Company for their services as members of the Board and any committee of the Board as follows:

Annual fees are paid to each non-employee director in four equal installments on a quarterly basis. Any non-employee directors serving a portion of the year are entitled to receive such fees on a pro rata basis based on their length of service during the year. Mr. Myers did not receive any additional compensation for their board service.

Additionally, new members of the Board are entitled to receive stock options in an amount to be determined by the Compensation Committee or the Board.

During the fiscal year ended July 31, 2021, Ms. Taylor received an option to purchase 100,000 shares of common stock. In addition, Messrs. Chen and Rendall received options to purchase 125,000 and 100,000 shares of common stock, respectively. All options granted to our non-employee directors during the fiscal year ended July 31, 2021 vest fifty percent (50%) on the date of the next annual meeting and fifty percent (50%) on the date of the following year’s annual meeting and carry a ten year term.

In the past, our Board has approved each year, generally in the first or second calendar quarter of the year, an annual option or stock grant for our non-employee directors. Any such grant is at the discretion of the Board, which considers the recommendation of our Compensation Committee. Upon the Board’s approval of any such grant, each non-employee director generally may elect whether to receive the grant as an option or stock award.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The following table provides information regarding the beneficial ownership of our common stock as of October 28, 2021, or the Evaluation Date, by: (i) each of our current directors, (ii) each of our named executive officers as set forth in Item 11 of this Annual Report, (iii) all such directors and executive officers as a group and (iv) our five percent or greater stockholders. The table is based upon information supplied by our officers, directors and principal stockholders and a review of Schedules 13D and 13G, if any, filed with the SEC. Unless otherwise indicated in the footnotes to the table and subject to community property laws where applicable, we believe that each of the stockholders named in the table has sole voting and investment power with respect to the shares indicated as beneficially owned.

Applicable percentages are based on 87,223,141 shares outstanding as of the Evaluation Date, adjusted as required by rules promulgated by the SEC. These rules generally attribute beneficial ownership of securities to persons who possess sole or shared voting power or investment power with respect to those securities. In addition, the rules include shares of our common stock issuable pursuant to the exercise of stock options or warrants or settlement of restricted stock units that are either immediately exercisable or exercisable within 60 days of the Evaluation Date. These shares are deemed to be outstanding and beneficially owned by the person holding those securities for the purpose of computing the percentage ownership of that person, but they are not treated as outstanding for the purpose of computing the percentage ownership of any other person.

Section 16(a) Beneficial Ownership Reporting Compliance

Section 16(a) of the Securities Exchange Act of 1934, as amended (the “Act”), requires our executive officers and directors and persons who beneficially own more than 10% of our Common Stock to file initial reports of beneficial ownership and reports of changes in beneficial ownership with the SEC. Such persons are required by SEC regulations to furnish us with copies of all Section 16(a) forms filed by such persons.

To the Company’s knowledge, other than as described above, no person who, during the fiscal year ended July 31, 2021, was a director or officer of the Company, or beneficial owner of more than ten percent of the Company’s Common Stock (which is the only class of securities of the Company registered under Section 12 of the Act), failed to file on a timely basis reports required by Section 16 of the Act during such fiscal year.

Equity Compensation Plan Information

2007 Equity Incentive Plan

In February 2016, we amended and restated our 2007 Equity Incentive Plan, the (“2007 Plan”), to, among other changes, increase the number of shares of common stock issuable under the 2007 Plan by 4,000,000 shares and extend the term of the 2007 Plan until February 4, 2026. The 2007 Plan provides for the grant of incentive and non-qualified stock options, as well as other share-based payment awards, to our employees, directors, consultants and advisors. These awards have up to a 10-year contractual life and are subject to various vesting periods, as determined by the Compensation Committee of the Board of Directors.

2017 Equity Incentive Plan

In January 2021, we amended and restated our 2017 Equity Incentive Plan, the (“2017 Plan”), to, among other changes, increase the number of shares of common stock issuable under the 2017 Plan by 5,000,000 shares and extend the term of the 2007 Plan until January 2031. The 2017 Plan provides for the grant of incentive and non-qualified stock options, as well as other share-based payment awards, to our employees, directors, consultants and advisors. These awards have up to a 10-year contractual life and are subject to various vesting periods, as determined by the Compensation Committee of the Board of Directors.

All of our equity incentive plans are administered by the Compensation Committee. The exercise price for stock options is always at or above the fair market value of our common stock on the date the award is granted. Fair market value is defined by the Plan and is based on prevailing market prices of our common stock as reported by the OTCQB. The term of stock options granted and their vesting schedules are determined by the Compensation Committee, subject to any limitations defined in the Plan. The Compensation Committee also determines the vesting of other, non-option, stock awards.

On June 23, 2017 we filed a Form S-8 to register shares of Common Stock underlying equity awards granted to our directors and officers outside the 2007 Amended and Restated Equity Incentive Plan. The S-8 registered 3,150,000 shares with respect to RSUs and options, which were also granted on the same date.

On August 23, 2017 we filed a Form S-8 to register shares of Common Stock underlying equity awards granted to our directors, officers and consultants outside the 2007 Amended and Restated Equity Incentive Plan. The S-8 registered 850,000 shares with respect to RSUs and options, which were also granted on the same date.

The following table sets forth, as of July 31, 2021, information with respect to our equity compensation plans, and with respect to certain other options and warrants.

Item 13. Certain Relationships and Related Transactions, and Director Independence

Except as described below and other than Board or employment relationships and compensation resulting from those employment relationships, no director, executive officer, 5% stockholder or immediate family member of any of the foregoing, was a party to any transaction or series of transactions since August 1, 2019 (the beginning of the year ended July 31, 2020), or is to be a party to any currently proposed transaction or series of proposed transactions, in which (i) we were or are to be a participant, (ii) the amount involved exceeds the lesser of $120,000 or one percent of the average of our total assets at fiscal year-end for the fiscal years ended July 31, 2021 and 2020, which is $54,000, and (iii) any director, executive officer, or immediate family member of any of the foregoing had or will have a direct or indirect material interest.

For information with respect to the compensation paid to our executive officers and directors, see heading “Executive Compensation” of this annual report.

On July 29, 2019, we entered into a Sublease Agreement (the “Sublease”) with SwabPlus L.P. (“SwabPlus”), effective July 25, 2019, pursuant to which we subleased certain office and industrial space for our corporate headquarters. The premises are located in Rancho Cucamonga, California. In December 2020, the Sublease expired. The Company is currently negotiating a new lease agreement with SwabPlus.

Tom Y. Lee, the Company’s Chief Executive Officer, Chairman of the Board and President, also serves as chairman of the board of directors and chief executive officer of SwabPlus. Mr. Lee also serves as president of Hermosa Property, Inc., the landlord of the premises subject to the Sublease. The Sublease was considered by the Company in accordance with the Company’s Related Party Transaction and Procedures Policy, and approved by the disinterested members of the Board.

Equity Transactions with our Directors and Officers

Since August 1, 2019, the Company has entered into the following equity investment transactions with its directors and officers:

Compensation of Our Current Directors and Executive Officers

For information with respect to the compensation offered to our current directors and executive officers, please see the descriptions under the heading “Executive Compensation” of this annual report.

Related Party Transaction Policy and Procedures

Pursuant to our Related Party Transaction and Procedures, our executive officers, directors, and principal stockholders, including their immediate family members and affiliates, are prohibited from entering into a related party transaction with us without the prior consent of our Audit Committee or our independent directors. Any request for us to enter into a transaction with an executive officer, director, principal stockholder, or any of such persons’ immediate family members or affiliates, must first be presented to our Audit Committee for review, consideration and approval. In approving or rejecting the proposed agreement, our Audit Committee will consider the relevant facts and circumstances available and deemed relevant, including, but not limited, to the risks, costs and benefits to us, the terms of the transaction, the availability of other sources for comparable services or products, and, if applicable, the impact on a director’s independence. Our Audit Committee shall approve only those agreements that, in light of known circumstances, are in, or are not inconsistent with, our best interests, as our Audit Committee determines in the good faith exercise of its discretion.

Compensation Committee Interlocks and Insider Participation

None of the members of our Compensation Committee are or have been an officer or employee of us. During fiscal 2021, 2020 and 2019, no member of our Compensation Committee had any relationship with us requiring disclosure under Item 404 of Regulation S-K, except as set forth above, none of our executive officers served on the Compensation Committee (or its equivalent) or board of directors of another entity any of whose executive officers served on our Compensation Committee or board of directors.

Board Composition

We are not currently listed on any national securities exchange or in an inter-dealer quotation system that has established a standard for independence. However, in evaluating the independence of our members and the composition of the committees of our Board of Directors, our Board utilizes the definition of “independence” as that term is defined by applicable listing standards of the NYSE MKT. As of the date of this annual report, our Board consists of three members, two of whom are considered independent as that term is defined by applicable listing standards of the NYSE MKT. Our independent directors include: Messrs. Chen and Okuno.

Our directors are appointed annually, and hold office until their successors have been elected and qualified or until their earlier death, resignation, disqualification, or removal.

Item 14. Principal Accounting Fees and Services

Independent Registered Public Accounting Firm’s Fee Summary

The following table provides information regarding the fees billed to us by Weinberg & Company, P.A. for the years ended July 31, 2021 and 2020. All fees described below were approved by the Board or the Audit Committee:

Pre-Approval Policies and Procedures

Our Audit Committee’s policy is to pre-approve all audit and permissible non-audit services provided by our independent auditors. These services may include audit services, audit-related services, tax services and other services. Pre-approval is generally provided for up to one year and any pre-approval is detailed as to the particular service or category of services. The independent auditor and management are required to periodically report to the Audit Committee regarding the extent of services provided by the independent auditor in accordance with this pre-approval. Any proposed services not included within the list of pre-approved services or any proposed services that will cause the Company to exceed the pre-approved aggregate amount requires specific pre-approval by the Audit Committee. All audit fees, audit-related fees, tax fees, and other fees listed in the table above were approved by the Audit Committee pursuant to its pre-approval policies and procedures.

PART IV

Item 15. Exhibits and Financial Statement Schedules