RICHARDSON ELECTRONICS, LTD. - Annual Report: 2017 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION 

WASHINGTON, DC 20549 

FORM 10-K

For the fiscal year ended May 27, 2017 

OR

For the transition period from__________ to

Commission File Number: 0-12906

 (Exact name of registrant as specified in its charter)

40W267 Keslinger Road, P.O. Box 393, LaFox, Illinois 60147-0393 

(Address of principal executive offices)

Registrant’s telephone number, including area code: (630) 208-2200

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐  Yes     ☒  No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐  Yes     ☒  No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   ☒  Yes     ☐  No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   ☒  Yes     ☐  No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.   ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).   ☐  Yes     ☒  No

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant as of November 26, 2016, was approximately $64.0 million.

As of July 24, 2017, there were outstanding 10,712,044 shares of Common Stock, $0.05 par value and 2,136,919 shares of Class B Common Stock, $0.05 par value, which are convertible into Common Stock of the registrant on a one-for-one basis.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Proxy Statement for the Annual Meeting of Stockholders scheduled to be held October 10, 2017, which will be filed pursuant to Regulation 14A, are incorporated by reference in Part III of this report. Except as specifically incorporated herein by reference, the above mentioned Proxy Statement is not deemed filed as part of this report.

TABLE OF CONTENTS

Forward Looking Statements

Certain statements in this report may constitute “forward-looking” statements within the meaning of the Private Securities Litigation Reform Act of 1995. The terms “may”, “should”, “could”, “anticipate”, “believe”, “continues”, “estimate”, “expect”, “intend”, “objective”, “plan”, “potential”, “project”, and similar expressions are intended to identify forward-looking statements. These statements are not guarantees of future performance and involve risks, uncertainties, and assumptions that are difficult to predict. These statements are based on management’s current expectations, intentions, or beliefs and are subject to a number of factors, assumptions, and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements. Factors that could cause or contribute to such differences or that might otherwise impact the business include the risk factors set forth in Item 1A of this Form 10-K. We undertake no obligation to update any such factor or to publicly announce the results of any revisions to any forward-looking statements contained herein whether as a result of new information, future events, or otherwise.

In addition, while we do, from time to time, communicate with securities analysts, it is against our policy to disclose to them any material non-public information, or other confidential commercial information. Accordingly, stockholders should not assume that we agree with any statement or report issued by any analyst irrespective of the content of the statement or report. Thus, to the extent that reports issued by securities analysts contain any projections, forecasts, or opinions, such reports are not our responsibility.

PART I

ITEM 1. Business

General

Richardson Electronics, Ltd. is a leading global provider of engineered solutions, power grid and microwave tubes and related consumables; power conversion and RF and microwave components; high value flat panel detector solutions, replacement parts, tubes and service training for diagnostic imaging equipment; and customized display solutions. We serve customers in the alternative energy, healthcare, aviation, broadcast, communications, industrial, marine, medical, military, scientific and semiconductor markets. The Company’s strategy is to provide specialized technical expertise and “engineered solutions” based on our core engineering and manufacturing capabilities. The Company provides solutions and adds value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair through its global infrastructure.

Our products include electron tubes and related components, microwave generators, subsystems used in semiconductor manufacturing, and visual technology solutions. These products are used to control, switch or amplify electrical power signals, or are used as display devices in a variety of industrial, commercial, medical, and communication applications.

During the first quarter of fiscal 2015, we created a new strategic business unit called Richardson Healthcare (“Healthcare”). As hospitals remain under pressure to reduce costs while serving a much larger customer base, there is a growing demand for independent sources of high-value replacement parts for diagnostic imaging. Having access to parts that are tested and in stock enables hospitals to terminate expensive service contracts with the Original Equipment Manufacturers (“OEM”) and instead use third party service providers or in-house technicians. With our global infrastructure, technical sales team, and experience servicing the healthcare market, we are well positioned to take advantage of this market opportunity. Over time, our plan is to expand our position from being the leader in power grid tubes to a key player in the high-growth, high-profile healthcare industry.

Our fiscal year 2017 began on May 29, 2016, and ended on May 27, 2017. Unless otherwise noted, all references to a particular year in this document shall mean our fiscal year.

Geography

We currently have operations in the following major geographic regions: North America, Asia/Pacific, Europe, and Latin America.

Selected financial data attributable to each segment and geographic region for fiscal 2017, 2016, and 2015 is set forth in Note 11 “Segment and Geographic Information” of the notes to our consolidated financial statements in Part II, Item 8 of this Annual Report on Form 10-K.

We have three operating and reportable segments, which we define as follows:

Power and Microwave Technologies Group

Power and Microwave Technologies Group (“PMT”), launched in July 2015, combines Electron Device Group’s (“EDG”) core engineered solutions, power grid and microwave tube business with new RF and power technologies. As a manufacturer and authorized distributor, PMT’s strategy is to provide specialized technical expertise and engineered solutions based on our core engineering and manufacturing capabilities. We provide solutions and add value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair—all through our existing global infrastructure. PMT’s focus is on products for power, RF and microwave applications for customers in alternative energy, aviation, broadcast, communications, industrial, marine, medical, military, scientific, and semiconductor markets. PMT focuses on various applications including broadcast transmission, CO2 laser cutting, diagnostic imaging, dielectric and induction heating, high energy transfer, high voltage switching, plasma, power conversion, radar, and radiation oncology. PMT also offers its customers technical services for both microwave and industrial equipment.

PMT represents leading manufacturers of electron tubes and components used in semiconductor manufacturing equipment and industrial power applications. Among the suppliers they support are Amperex, CPI, Draloric, Eimac, General Electric, Hitachi, Jennings, L3, MaCom, National, NJRC, Thales, Toshiba, and Vishay.

PMT’s inventory levels reflect our commitment to maintain an inventory of a broad range of products for customers who are buying products for replacement of components used in critical equipment. PMT also sells a number of products representing trailing edge technology. While the market for these trailing edge technology products is declining, PMT is increasing its market share. PMT often buys products it knows it can sell ahead of any supplier price increases. As manufacturers for these products exit the business, PMT has the option to purchase a substantial portion of their remaining inventory.

PMT has distribution agreements with many of its suppliers; most of these agreements provide exclusive distribution rights which often include global coverage. The agreements are typically long term, and usually contain provisions permitting termination by either party if there are significant breaches which are not cured within a reasonable period of time. Although some of these agreements allow PMT to return inventory periodically, others do not, in which case PMT may have obsolete inventory that they cannot return to the supplier.

PMT’s suppliers provide warranty coverage for the products and allow return of defective products, including those returned to PMT by its customers. For information regarding the warranty reserves, see Note 3 “Significant Accounting Policies” of the notes to our consolidated financial statements in Part II, Item 8 of this Annual Report on Form 10-K.

In addition to third party products, we sell proprietary products principally under certain trade names we own including: Amperex®, Cetron®, and National®. Our proprietary products include thyratrons and rectifiers, power tubes, ignitrons, magnetrons, phototubes, microwave generators, and liquid crystal display monitors. The materials used in the manufacturing process consist of glass bulbs and tubing, nickel, stainless steel and other metals, plastic and metal bases, ceramics, and a wide variety of fabricated metal components. These materials are generally readily available, but some components may require long lead times for production, and some materials are subject to shortages or price fluctuations based on supply and demand.

Canvys

Canvys provides customized display solutions serving the corporate enterprise, financial, healthcare, industrial, and medical original equipment manufacturers (“OEM”) markets. Our engineers design, manufacture, source, and support a full spectrum of solutions to match the needs of our customers. We offer custom display solutions that include touch screens, protective panels, custom enclosures, specialized cabinet finishes, and application specific software packages. Our volume commitments are much lower than those of the large display manufacturers, making us the ideal choice for companies with very specific design requirements. We partner with both private label manufacturing companies and leading branded hardware vendors to offer the high quality liquid crystal displays, mounting devices, and customized computing platforms.

We have long-standing relationships with key component and finished goods manufacturers including 3M, LG, NEC Displays, and several key Asian display manufacturers that manufacture products to our specifications. We believe supplier relationships, combined with our engineering design and manufacturing capabilities and private label partnerships, allow us to maintain a well-balanced and technologically advanced offering of customer specific display solutions.

Healthcare

Healthcare manufactures, refurbishes and distributes high value replacement parts for the healthcare market including hospitals, medical centers, asset management companies, independent service organizations, and multi-vendor service providers. Products include Diagnostic Imaging replacement parts including CT and MRI tubes, hydrogen thyratrons, klystrons, magnetrons; replacement flat panel detectors and upgrades; and additional replacement components currently under development for the diagnostic imaging service market. Through a combination of newly developed products and partnerships, service offerings, and training programs, we believe we can help our customers improve efficiency and deliver better clinical outcomes while lowering the cost of healthcare delivery.

Sales and Product Management

We have employees, as well as authorized representatives, who are not our employees, selling our products primarily in regions where we do not have a direct sales presence.

We offer various credit terms to qualifying customers as well as cash in advance and credit card terms. We establish credit limits for each customer and routinely review delinquent and aging accounts.

Distribution

We maintain approximately 110,700 part numbers in our product inventory database and we estimate that more than 90% of orders received by 6:00 p.m. local time are shipped complete the same day if product is in stock. Customers can access our products on our web sites, www.rell.com, www.rellhealthcare.com, www.canvys.com, and www.rellaser.com, through electronic data interchange, or by telephone. Customer orders are processed by our regional sales offices and supported primarily by one of our distribution facilities in LaFox, Illinois; Amsterdam, Netherlands; Marlborough, Massachusetts; Donaueschingen, Germany; or Singapore, Singapore. We also have satellite warehouses in Sao Paulo, Brazil; Shanghai, China; Bangkok, Thailand; and Hook, United Kingdom. Our data processing network provides on-line, real-time interconnection of all sales offices and central distribution operations, 24 hours per day, seven days per week. Information on stock availability, pricing in local currency, cross-reference information, customers, and market analyses are obtainable throughout the entire distribution network.

International Sales

During fiscal 2017, approximately 60% of our sales were made outside the U.S. We continue to pursue new international sales to further expand our geographic reach.

Employees

As of May 27, 2017, we employed 366 individuals. All of our employees are non-union, and we consider our relationships with our employees to be good.

Website Access to SEC Reports

We maintain an Internet website at www.rell.com. Our Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities and Exchange Act of 1934 are accessible through our website, free of charge, as soon as reasonably practicable after these reports are filed electronically with the Securities and Exchange Commission. Interactive Data Files pursuant to Rule 405 of Regulation S-T, of these filing dates, formatted in Extensible Business Reporting Language (“XBRL”) are accessible as well. To access these reports, go to our website at www.rell.com. The foregoing information regarding our website is provided for convenience and the content of our website is not deemed to be incorporated by reference in this report filed with the Securities and Exchange Commission.

ITEM 1A. Risk Factors

Investors should consider carefully the following risk factors in addition to the other information included and incorporated by reference in this Annual Report on Form 10-K that we believe are applicable to our businesses and the industries in which we operate. While we believe we have identified the key risk factors affecting our businesses, there may be additional risks and uncertainties that are not presently known or that are not currently believed to be significant that may adversely affect our results of operations.

A significant portion of our cash, cash equivalents, and investments are held by our foreign subsidiaries and could affect future liquidity needs.

             We hold a significant amount of cash and investment securities at our foreign subsidiaries. Liquidity requirements could necessitate transfers of existing cash balances between our subsidiaries or to the United States that may be subject to restrictions or result in unfavorable tax or earnings consequences for those amounts that are not considered reinvested indefinitely. Approximately 76% of our cash and investment securities are held by our foreign subsidiaries. While we intend to use some of the cash held outside the United States to fund our international operations and growth, when we encounter a significant need for liquidity domestically or at a particular location that we cannot fulfill through other internal or external sources, we may experience unfavorable tax, earnings and liquidity consequences due to cash transfers. These adverse consequences would occur, for example, if the transfer of cash into the United Sates is taxed and no offsetting foreign tax credit or net operating loss carryforward is available to offset the U.S. tax liability, resulting in lower earnings and liquidity. We do not provide for U.S. taxes on the undistributed earnings of foreign subsidiaries that are considered to be reinvested indefinitely. 

 We may not achieve our plan for sales growth and margin targets.

We have established both margin and expense targets to grow our sales with new and existing customers. If we do not achieve our growth objectives, the complexity of our global infrastructure makes it difficult to leverage our fixed cost structure to align with the size of our operations. Factors that could have a significant effect on our ability to achieve these goals include the following:

We have historically incurred significant charges for inventory obsolescence, and may incur similar charges in the future.

We maintain significant inventories in an effort to ensure that customers have a reliable source of supply. Our products generally support industrial machinery that is powered by tube technology. As technology evolves and this capital equipment is replaced, the market for our products potentially declines. In addition, the market for many of our other products is characterized by rapid change resulting from the development of new technologies, evolving industry standards, frequent new product introductions by some of our suppliers and changing end-user demand, which can contribute to the decline in value or obsolescence of our inventory. We do not have many long-term supply contracts with our customers. If we fail to anticipate the changing needs of our customers or we fail to accurately forecast customer demand, our customers may not place orders with us, and we may accumulate significant inventories of products which we may be unable to sell or return to our vendors. This may result in a decline in the value of our inventory.

We face competitive pressures that could have a material adverse effect on our business.

Our overall competitive position depends on a number of factors including price, engineering capability, vendor representation, product diversity, lead times and the level of customer service. There are very few vacuum tube competitors in the markets we serve. There are also a limited number of Chinese manufacturers whose ability to produce vacuum tubes has progressed over the past several years. The most significant competitive risk comes from technical obsolescence. Canvys faces many competitors in the markets we serve. Increased competition may result in price reductions, reduced margins, or a loss of market share, any of which could materially and adversely affect our business, operating results, and financial condition. As we expand our business and pursue our growth initiatives, we may encounter increased competition from current and/or new competitors. Our failure to maintain and enhance our competitive position could have a material adverse effect on our business.

A single stockholder has voting control over us.

As of July 24, 2017, Edward J. Richardson, our Chairman, Chief Executive Officer and President, beneficially owned approximately 99% of the outstanding shares of our Class B common stock, representing approximately 66% of the voting power of the outstanding common stock. This share ownership permits Mr. Richardson to exert control over the outcome of stockholder votes, including votes concerning the election of directors, by-law amendments, possible mergers, corporate control contests, and other significant corporate transactions.

We are dependent on a limited number of vendors to supply us with essential products.

Our principal products are capacitors, vacuum tubes and related products, microwave generators, and high voltage power supplies. The products we supply are currently produced by a relatively small number of manufacturers. One of our suppliers represented more than 10% of our total cost of sales. Our success depends, in large part, on maintaining current vendor relationships and developing new relationships. To the extent that our significant suppliers are unwilling or unable to continue to do business with us, or extend lead times, or limit supplies due to capacity constraints, or other factors, there could be a material adverse effect on our business.

International operations represent a significant percentage of our business and present a variety of risks which could impact our results.

Because we source and sell our products worldwide, our business is subject to risks associated with doing business internationally. These risks include the costs and difficulties of managing foreign entities, limitations on the repatriation and investment of funds, cultural differences that affect customer preferences and business practices, unstable political or economic conditions, trade protection measures and import or export licensing requirements, and changes in tax laws.

We also face exposure to fluctuations in foreign currency exchange rates because we conduct business outside of the United States. Price increases caused by currency exchange rate fluctuations may make our products less competitive or may have an adverse effect on our margins. Our international revenues and expenses generally are derived from sales and operations in currencies other than the U.S. dollar. Accordingly, when the U.S. dollar strengthens in relation to the base currencies of the countries in which we sell our products, our U.S. dollar reported net revenue and income will decrease. We currently do not engage in any currency hedging transactions. We cannot predict whether foreign currency exchange risks inherent in doing business in foreign countries will have a material adverse effect on our operations and financial results in the future.

Repatriation of cash held by our foreign subsidiaries to fund U.S. operations or strategic opportunities may be restricted or may subject us to a significant tax liability.

As of May 27, 2017, $48.6 million of cash, cash equivalents was held by our foreign subsidiaries. Some of these subsidiaries are located in jurisdictions which require foreign government approval before a cash repatriation can occur. In addition, under current tax law, repatriation of this cash may trigger significant adverse tax consequences in the U.S.

If the cash generated by our domestic operations is not sufficient to fund our domestic operations and our broader corporate initiatives, such as stock repurchases, dividends, acquisitions, and other strategic opportunities, we may need to raise additional funds through public or private debt or equity financings, or we may need to obtain new credit facilities to the extent we are unable to, or choose not to, repatriate our overseas cash. Such additional financing may not be available on terms favorable to us, or at all, and any new equity financings or offerings would dilute our current stockholders’ ownership interests in us. Furthermore, lenders may not agree to extend us new, additional or continuing credit. In any such case, our business, operating results or financial condition could be adversely impacted.

BREXIT/Europe

In a non-binding referendum on the United Kingdom’s membership in the European Union in June 2016, a majority of those who voted approved the United Kingdom’s withdrawal from the European Union. Any withdrawal by the United Kingdom from the European Union (“Brexit”) would occur after, or possible concurrently with, a process of negotiation regarding the future terms of the United Kingdom’s relationship with the European Union, which could result in the United Kingdom losing access to certain aspects of the single EU market and the global trade deals negotiated by the European Union on behalf of its members. The Brexit vote and the perceptions as to the impact of the withdrawal of the United Kingdom may adversely affect business activity, political stability and economic conditions in the United Kingdom, the European Union and elsewhere. Any of these developments, or the perception that any of these developments are likely to occur, could have a material adverse effect on economic growth or business activity in the United Kingdom, the Eurozone, or the European Union, and could result in the relocation of businesses, cause business interruptions, lead to economic recession or depression, and impact the stability of the financial markets, availability of credit, political systems or financial institutions and the financial and monetary system. Given that we conduct a substantial portion of our business in the European Union, these developments could have a material adverse effect on our business, financial position, liquidity and results of operations. The uncertainty concerning the timing and terms of the exit could also have a negative impact on the growth of the European economy and cause greater volatility in all of the global currencies that we currently use to transact business.

We rely heavily on information technology systems which, if not properly functioning, could materially adversely affect our business.

We rely on our information technology systems to process, analyze, and manage data to facilitate the purchase, manufacture, and distribution of our products, as well as to receive, process, bill, and ship orders on a timely basis. A significant disruption or failure in the design, operation, security or support of our information technology systems could significantly disrupt our business.

Our information technology systems may be subject to cyber attacks, security breaches or computer hacking. Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise sensitive personal, proprietary or confidential information, create system disruptions or cause shutdowns. They also may be able to develop and deploy viruses, worms and other malicious software programs that attack our systems or otherwise exploit any security vulnerabilities. Our systems and the data stored on those systems may also be vulnerable to security incidents or security attacks, acts of vandalism or theft, coordinated attacks by activist entities, misplaced or lost data, human errors, or other similar events that could negatively affect our systems and its data, as well as the data of our business partners. Further, third parties, such as hosted solution providers, that provide services to us, could also be a source of security risk in the event of a failure of their own security systems and infrastructure.

The costs to mitigate or address security threats and vulnerabilities before or after a cyber incident could be significant. Our remediation efforts may not be successful and could result in interruptions, delays or cessation of service, and loss of existing or potential suppliers or customers. In addition, breaches of our security measures and the unauthorized dissemination of sensitive personal, proprietary or confidential information about us, our business partners or other third parties could expose us to significant potential liability and reputational harm. As threats related to cyber attacks develop and grow, we may also find it necessary to make further investments to protect our data and infrastructure, which may impact our profitability. As a global enterprise, we could also be negatively impacted by existing and proposed laws and regulations, as well as government policies and practices related to cybersecurity, privacy, data localization and data protection.

Our products may be found to be defective or our services performed may result in equipment or product damage and, as a result, warranty and/or product liability claims may be asserted against us.

Many of our components are sold at prices that are significantly lower than the cost of the equipment or other goods in which they are incorporated. Since a defect or failure in a product could give rise to failures in the equipment that incorporates them, we may face claims for damages that are disproportionate to the revenues and profits we receive from the components involved in the claims. While we typically have provisions in our agreements with our suppliers that hold the supplier accountable for defective products, and we and our suppliers generally exclude consequential damages in our standard terms and conditions, our ability to avoid such liabilities may be limited as a result of various factors, including the inability to exclude such damages due to the laws of some of the countries where we do business. Our business could be adversely affected as a result of a significant quality or performance issues in the components sold by us if we are required to pay for the damages. Although we have product liability insurance, such insurance is limited in coverage and amount.

Substantial defaults by our customers on our accounts receivable or the loss of significant customers could have a significant negative impact on our business.

We extend credit to our customers. The failure of a significant customer or a significant group of customers to timely pay all amounts due could have a material adverse effect on our financial condition and results of operations. The extension of credit involves considerable judgment and is based on management’s evaluation of factors which include such things as a customer’s financial condition, payment history, and the availability of collateral to secure customers’ receivables.

Failure to successfully implement our growth initiatives, or failure to realize the benefits expected from these initiatives if implemented, may create ongoing operating losses or otherwise adversely affect our business, operating results and financial condition.

Our growth strategy focuses on expanding our healthcare and our power conversion businesses. On June 15, 2015, we acquired certain assets, including inventory, receivables, fixed assets, and certain other assets, of International Medical Equipment and Services, Inc. (“IMES”), for a purchase price of $12.2 million. In July 2015, we launched Power and Microwave Technologies Group (“PMT”), which combines our core engineered solutions, power grid and microwave tube business with new RF and power technologies. We may be unable to implement our growth initiatives or reach profitability in the near future or at all, due to many factors, including factors outside of our control. If our investments in these growth initiatives do not yield anticipated returns for any reason, our business, operating results and financial condition may be adversely affected.

We may not be successful in identifying, consummating and integrating future acquisitions.

As part of our growth strategy, our intent is to acquire additional businesses or assets. We may not be able to identify attractive acquisition candidates or complete the acquisition of identified candidates at favorable prices and upon advantageous terms. Also, acquisitions are accompanied by risks, such as potential exposure to unknown liabilities and the possible loss of key employees and customers of the acquired business. In addition, we may not obtain the expected benefits or cost savings from acquisitions. Acquisitions are subject to risks associated with financing the acquisition, and integrating the operations, personnel and systems of the acquired businesses. If any of these risks materialize, they may result in disruptions to our business and the diversion of management time and attention, which could increase the costs of operating our existing or acquired businesses or negate the expected benefits of the acquisitions.

Economic weakness and uncertainty could adversely affect our revenues and gross margins.

Our revenues and gross profit margins depend significantly on global economic conditions, the demand for our products and services and the financial condition of our customers. Economic weakness and uncertainty have in the past resulted, and may result in the future, in decreased revenues and gross profit margins. Economic uncertainty also makes it more difficult for us to forecast overall supply and demand with a great deal of confidence.

Our operating results during fiscal 2017 reflect a net loss. There can be no assurance that we will experience a recovery in the near future; nor is there any assurance that such worldwide economic volatility experienced recently will not continue.

Major disruptions to our logistics capability could have a material adverse impact on our operations.

Our global logistics services are operated through specialized and centralized distribution centers. We depend on third party transportation service providers for the delivery of products to our customers. A major interruption or disruption in service at any of our distribution centers for any reason (such as natural disasters, pandemics, or significant disruptions of services from our third party providers) could cause cancellations or delays in a significant number of shipments to customers and, as a result, could have a severe impact on our business, operations and financial performance.

We may be subject to intellectual property rights claims, which are costly to defend, could require payment of damages or licensing fees, and/or could limit our ability to use certain technologies in the future.

Substantial litigation and threats of litigation regarding intellectual property rights exist in the display systems and electronics industries. From time to time, third parties, including certain companies in the business of acquiring patents with the intention of aggressively seeking licensing revenue from purported infringers, may assert patent and/or other intellectual property rights to technologies that are important to our business. In any dispute involving products that we have sold, our customers could also become the target of litigation. We are obligated in many instances to indemnify and defend our customers if the products we sell are alleged to infringe any third party’s intellectual property rights. In some cases, depending on the nature of the claim, we may be able to seek indemnification from our suppliers for our self and our customers against such claims, but there is no assurance that we will be successful in obtaining such indemnification or that we are fully protected against such claims. Any infringement claim brought against us, regardless of the duration, outcome or size of damage award, could result in substantial cost, divert our management’s attention, be time consuming to defend, result in significant damage awards, cause product shipment delays, or require us to enter into royalty or other licensing agreements.

Additionally, if an infringement claim is successful we may be required to pay damages or seek royalty or license arrangements which may not be available on commercially reasonable terms. The payment of any such damages or royalties may significantly increase our operating expenses and harm our operating results and financial condition. Also, royalty or license arrangements may not be available at all. We may have to stop selling certain products or certain technologies, which could affect our ability to compete effectively.

Potential lawsuits, with or without merit, may divert management’s attention, and we may incur significant expenses in our defense. In addition, we may be required to pay damage awards or settlements, become subject to injunctions or other equitable remedies, or determine to abandon certain lines of business, that may cause a material adverse effect on our results of operations, financial position, and cash flows.

If we fail to maintain an effective system of internal controls or discover material weaknesses in our internal controls over financial reporting, we may not be able to detect fraud or report our financial results accurately or timely.

An effective internal control environment is necessary for us to produce reliable financial reports and is an important part of our effort to prevent financial fraud. We are required to periodically evaluate the effectiveness of the design and operation of our internal controls over financial reporting. Based on these evaluations, we may conclude that enhancements, modifications, or changes to internal controls are necessary or desirable. While management evaluates the effectiveness of our internal controls on a regular basis, these controls may not always be effective. There are inherent limitations on the effectiveness of internal controls, including fraud, collusion, management override, and failure in human judgment. In addition, control procedures are designed to reduce rather than eliminate business risks.

If we fail to maintain an effective system of internal controls, or if management or our independent registered public accounting firm discovers material weaknesses in our internal controls, we may be unable to produce reliable financial reports or prevent fraud. In addition, we may be subject to sanctions or investigation by regulatory authorities, such as the Securities and Exchange Commission or NASDAQ. Any such actions could result in an adverse reaction in the financial markets due to a loss of confidence in the reliability of our financial statements.

If we are deemed to be an investment company, we will be required to meet burdensome compliance requirements and restrictions on our activities.

We currently have significant cash and investments. If we are deemed to be an “investment company” as defined under the Investment Company Act of 1940 (the “Investment Company Act”), the nature of our investments may be subject to various restrictions. We do not believe that our principal activities subject us to the Investment Company Act. If we are deemed to be subject to the Investment Company Act, compliance with required additional regulatory burdens would increase our operating expenses.

The company’s goodwill and identifiable intangible assets could become impaired, which could reduce the value of our assets and reduce our net income in the year in which the write-off occurs.

Our goodwill and intangible assets could become impaired, which could reduce the value of our assets and reduce our net income in the year in which the write-off occurs. We ascribe value to certain intangible assets, which consist of customer lists and trade names resulting from acquisitions. We may incur an impairment charge on goodwill or on intangible assets if we determine that the fair value of the intangible assets are less than their current carrying values. We evaluate whether events have occurred that indicate all, or a portion, of the carrying amount of goodwill or intangible assets may no longer be recoverable. If this is the case, an impairment charge to earnings would be necessary.

ITEM 1B. Unresolved Staff Comments

None.

ITEM 2. Properties

The Company owns one facility and leases 26 facilities. We own our corporate facility and largest distribution center, which is located on approximately 100 acres in LaFox, Illinois and consists of approximately 242,000 square feet of manufacturing, warehouse, and office space. We maintain geographically diverse facilities because we believe this provides value to our customers and suppliers, and limits market risk and exchange rate exposure. We consider our properties to be well maintained, in sound condition, and adequate for our present needs. The extent of utilization varies from property to property and from time to time during the year.

Our facility locations, their primary use, and segments served are as follows:

ITEM 3. Legal Proceedings

From time to time, we or our subsidiaries are involved in pending judicial proceedings concerning matters arising in the ordinary course of our business. While the outcome of litigation is subject to uncertainties, based on information at the time the financial statements were issued, we do not believe that the outcome of any current claims will have a material adverse effect on our consolidated financial position, results of operations, or cash flows.

PART II

ITEM 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Unregistered Sales of Equity Securities

None.

Share Repurchases

There were no share repurchases in fiscal 2017.                                        

Dividends

Our quarterly dividend was $0.06 per common share and $0.054 per Class B common share. Annual dividend payments for fiscal year 2017 and fiscal year 2016 were approximately $3.0 million and $3.1 million, respectively. All future payments of dividends are at the discretion of the Board of Directors. Dividend payments will depend on earnings, capital requirements, operating conditions, and such other factors that the Board may deem relevant.

Common Stock Information

Our common stock is traded on the NASDAQ Global Select Market (“NASDAQ”) under the trading symbol (“RELL”). There is no established public trading market for our Class B common stock. As of July 24, 2017, there were approximately 558 stockholders of record for the common stock and approximately 15 stockholders of record for the Class B common stock. The following table sets forth the high and low closing sales price per share of RELL common stock as reported on the NASDAQ for the periods indicated.

High and Low Closing Prices of Common Stock

Performance Graph

The following graph compares the performance of our common stock for the periods indicated with the performance of the NASDAQ Composite Index and NASDAQ Electronic Components Index. The graph assumes $100 invested on the last day of our fiscal year 2012, in our common stock, the NASDAQ Composite Index, and NASDAQ Electronic Components Index. Total return indices reflect reinvestment of dividends at the closing stock prices at the date of the dividend declaration.

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among Richardson Electronics, Ltd., the NASDAQ Composite Index
and the NASDAQ Electronic Components Index

*$100 invested on 6/2/12 in stock or 5/31/12 in index, including reinvestment of dividends.
Indexes calculated on month-end basis.

ITEM 6. Selected Financial Data

Five-Year Financial Review

This information should be read in conjunction with our consolidated financial statements, accompanying notes, and Management’s Discussion and Analysis of Financial Condition and Results of Operations included elsewhere herein.

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the consolidated financial statements and related notes.

Management’s Discussion and Analysis of Financial Condition and Results of Operations (“MD&A”) is intended to assist the reader in better understanding our business, results of operations, financial condition, changes in financial condition, critical accounting policies and estimates, and significant developments. MD&A is provided as a supplement to, and should be read in conjunction with, our consolidated financial statements and the accompanying notes appearing elsewhere in this filing. This section is organized as follows:

Business Overview

Richardson Electronics, Ltd. is a leading global provider of engineered solutions, power grid and microwave tubes and related consumables; power conversion and RF and microwave components; high value flat panel detector solutions, replacement parts, tubes and service training for diagnostic imaging equipment; and customized display solutions. We serve customers in the alternative energy, healthcare, aviation, broadcast, communications, industrial, marine, medical, military, scientific and semiconductor markets. The Company’s strategy is to provide specialized technical expertise and “engineered solutions” based on our core engineering and manufacturing capabilities. The Company provides solutions and adds value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair through its global infrastructure.

Our products include electron tubes and related components, microwave generators, subsystems used in semiconductor manufacturing, and visual technology solutions. These products are used to control, switch or amplify electrical power signals, or are used as display devices in a variety of industrial, commercial, medical, and communication applications.

On June 15, 2015, Richardson Electronics, Ltd (“the Company”), acquired certain assets of International Medical Equipment and Services, Inc. (“IMES”), for a purchase price of $12.2 million. This includes the purchase of inventory, receivables, fixed assets, and certain other assets of the Company. The Company did not acquire any liabilities of IMES. The total consideration paid excludes transaction costs.

IMES, based in South Carolina, provides reliable, cost-saving solutions worldwide for major brands of CT and MRI equipment. This acquisition positions Richardson Healthcare to provide cost effective diagnostic imaging replacement parts and training to hospitals, diagnostic imaging centers, medical institutions, and independent service organizations. IMES offers an extensive selection of replacement parts, as well as an interactive training center, on-site test bays and experienced technicians who provide 24/7 customer support. Replacement parts are readily available and triple tested to provide peace of mind when uptime is critical. IMES core operations have remained in South Carolina. Richardson Healthcare plans to expand IMES’ replacement parts and training offerings geographically leveraging the Company’s global infrastructure. During the fourth quarter of fiscal 2016, IMES opened up their first foreign location in Amsterdam.

We have three operating and reportable segments, which we define as follows:

Power and Microwave Technologies Group (“PMT”), launched in July 2015, combines Electron Device Group’s (“EDG”) core engineered solutions, power grid and microwave tube business with new RF and power technologies. As a manufacturer and authorized distributor, PMT’s strategy is to provide specialized technical expertise and engineered solutions based on our core engineering and manufacturing capabilities. We provide solutions and add value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair—all through our existing global infrastructure. PMT’s focus is on products for power, RF and microwave applications for customers in alternative energy, aviation, broadcast, communications, industrial, marine, medical, military, scientific, and semiconductor markets. PMT focuses on various applications including broadcast transmission, CO2 laser cutting, diagnostic imaging, dielectric and induction heating, high energy transfer, high voltage switching, plasma, power conversion, radar, and radiation oncology. PMT also offers its customers technical services for both microwave and industrial equipment.

Canvys provides customized display solutions serving the corporate enterprise, financial, healthcare, industrial, and medical original equipment manufacturers (“OEM”) markets.

Healthcare manufactures, refurbishes and distributes high value replacement parts for the healthcare market including hospitals, medical centers, asset management companies, independent service organizations, and multi-vendor service providers. Products include Diagnostic Imaging replacement parts including CT and MRI tubes, hydrogen thyratrons, klystrons, magnetrons; replacement flat panel detectors and upgrades; and additional replacement components currently under development for the diagnostic imaging service market. Through a combination of newly developed products and partnerships, service offerings, and training programs, we believe we can help our customers improve efficiency and deliver better clinical outcomes while lowering the cost of healthcare delivery.

We currently have operations in the following major geographic regions: North America, Asia/Pacific, Europe, and Latin America.

Results of Continuing Operations

Overview - Fiscal Year Ended May 27, 2017

Net Sales and Gross Profit Analysis

Net sales by segment and percent change for fiscal 2017, 2016, and 2015 were as follows (in thousands):

During fiscal 2017 consolidated net sales decreased by 3.6% compared to fiscal 2016. Sales for PMT declined by 1.3%, Canvys sales declined by 12.4% and Healthcare sales declined by 6.9%. During fiscal 2016 consolidated net sales increased by 3.7% compared to fiscal 2015. Sales for PMT declined by 0.2% and Canvys declined by 4.8%, offset by a 98.2% increase in sales for Healthcare.

Gross profit by segment and percent of segment net sales for fiscal 2017, 2016, and 2015 were as follows (in thousands):

Gross profit reflects the distribution and manufacturing product margin less manufacturing variances, inventory obsolescence charges, customer returns, scrap and cycle count adjustments, engineering costs, unabsorbed manufacturing labor and overhead, and other provisions.

Consolidated gross profit was $43.9 million during fiscal 2017, compared to $44.8 million during fiscal 2016. Consolidated gross margin as a percentage of net sales increased to 32.1% during fiscal 2017, from 31.6% during fiscal 2016. Gross margin during fiscal 2017 included expense related to inventory provisions for PMT of $0.4 million, $0.1 million for Canvys, and less than $0.1 million for Healthcare. Gross margin during fiscal 2016 included expense related to inventory provisions for PMT of $0.3 million, $0.4 million for Canvys, and less than $0.1 million for Healthcare.

Consolidated gross profit was $44.8 million during fiscal 2016, compared to $41.1 million during fiscal 2015. Consolidated gross margin as a percentage of net sales increased to 31.6% during fiscal 2016, from 30.0% during fiscal 2015. Gross margin during fiscal 2016 included expense related to inventory provisions for PMT of $0.3 million, $0.4 million for Canvys, and less than $0.1 million for Healthcare. Gross margin during fiscal 2015 included expense related to inventory provisions for PMT of $0.1 million, $0.1 million for Canvys, and less than $0.1 million for Healthcare.

Power and Microwave Technologies Group

Net sales for PMT decreased 1.3% to $104.2 million during fiscal 2017, from $105.6 million during fiscal 2016. Last year, we recognized a large tube order for a military application which was mostly offset in fiscal 2017 by new technology suppliers in the RF, microwave and power market as well as increases in manufactured products associated with growth in the semiconductor wafer fab market. Gross margin as a percentage of net sales increased to 32.0% during fiscal 2017 as compared to 31.3% during fiscal 2016, primarily due to product mix and improved manufacturing absorption.

Net sales for PMT decreased 0.2% to $105.6 million during fiscal 2016, from $105.7 million during fiscal 2015. We recognized a large tube order for a military application and sales of power conversion and RF and microwave components increased. This was offset by a decline in the broadcast market along with specialty products manufactured in LaFox and sold primarily into the semiconductor capital equipment market. Gross margin as a percentage of net sales remained flat at 31.3% during fiscal 2016 as compared to fiscal 2015.

Canvys

Net sales for Canvys decreased 12.4% to $20.5 million during fiscal 2017, from $23.5 million during fiscal 2016. Sales in North America were down due to customer delays in new program rollouts. Gross margin as a percentage of net sales increased to 28.0% during fiscal 2017 as compared to 25.7% during fiscal 2016, primarily due to product mix and lower inventory reserves.

Net sales for Canvys decreased 4.8% to $23.5 million during fiscal 2016, from $24.6 million during fiscal 2015. Sales in the North America OEM markets were down due to specific customers going through acquisitions within our customer base that disrupted the day to day business and delays in new programs. Gross margin as a percentage of net sales declined to 25.7% during fiscal 2016 as compared to 26.2% during fiscal 2015, primarily due to the devaluation of the Euro.

 Healthcare

Net sales for Healthcare decreased 6.9% to $12.1 million during fiscal 2017, from $13.0 million during fiscal 2016. The reduction in sales was due to a decline in the Picture Archiving and Communication Systems (PACS) display business, which we divested in the fourth quarter of fiscal 2017. This decline was slightly offset by an increase in sales in our core Healthcare business including diagnostic imaging replacement parts and CT tubes. Gross margin as a percentage of net sales decreased to 39.2% during fiscal 2017, compared to 44.0% during fiscal 2016. This decrease was primarily due to change in product mix that included a significant increase year over year in IMES equipment sales, which yield lower margins than replacement parts and CT tubes, in addition to continued pricing pressure on replacement parts resulting in lower margins.

Net sales for Healthcare increased 98.2% to $13.0 million during fiscal 2016, from $6.6 million during fiscal 2015. The acquisition of IMES during fiscal 2016 resulted in $7.6 million in sales, however sales in the Picture Archiving and Communication Systems (PACS) display market were down $1.2 million driven by budget concerns and a difficult capital market for hospitals. Gross margin as a percentage of net sales increased to 44.0% during fiscal 2016, compared to 24.1% during fiscal 2015. This increase was primarily due to the significantly higher gross margins of the IMES business acquired during fiscal 2016.

Sales by Geographic Area

On a geographic basis, our sales are categorized by destination: North America; Europe; Asia/Pacific; Latin America; and Other.

Net sales by geographic area and percent change for fiscal 2017, 2016, and 2015 were as follows (in thousands):

Gross profit by geographic area and percent of geographic net sales for fiscal 2017, 2016, and 2015 were as follows (in thousands):

⁽¹⁾ Other primarily includes net sales not allocated to a specific geographical region, unabsorbed value-add costs, and unallocated freight expenses.

We sell our products to customers in diversified industries and perform periodic credit evaluations of our customers’ financial condition. Terms are generally on open account, payable net 30 days in North America, and vary throughout Asia/Pacific, Europe, and Latin America. Estimates of credit losses are recorded in the financial statements based on monthly reviews of outstanding accounts.

Selling, General, and Administrative Expenses

Selling, general, and administrative expenses (“SG&A”) decreased during fiscal 2017 to $49.9 million from $51.6 million during fiscal 2016. SG&A as a percentage of sales, remained flat at 36.4% during fiscal 2017 as compared to fiscal 2016. The decrease was due to lower salaries and incentive compensation expenses from workforce reductions, and a reduction of IT expenses compared to fiscal 2016, mostly offset by $1.3 million of severance expense related to a reduction in workforce during the second quarter of fiscal 2017. In addition, research and development expenses for Richardson Healthcare increased by $0.5 million.

Selling, general, and administrative expenses (“SG&A”) increased during fiscal 2016 to $51.6 million from $49.2 million during fiscal 2015. SG&A as a percentage of sales, increased to 36.4% during fiscal 2016 from 35.9% during fiscal 2015. The increase in SG&A was due to $5.0 million related to IMES and additional investments in our Richardson Healthcare business to support its growth and $0.7 million in PMT to support the power conversion growth initiatives, partially offset by decreases of $1.9 million in IT services, $0.9 million in our other support functions, and $0.5 million in Canvys.

Other Income/Expense

Other income/expense was expense of $0.4 million during fiscal 2017, compared to income of $0.3 million during fiscal 2016. Fiscal 2017 included $0.2 million of investment income, offset by $0.6 million of foreign exchange losses. Fiscal 2016 included $0.6 million of investment income, partially offset by $0.2 million of foreign exchange losses. Our foreign exchange gains and losses are primarily due to the translation of U.S. dollars held in non-U.S. entities. We currently do not utilize derivative instruments to manage our exposure to foreign currency.

Income Tax Provision (Benefit)

Our income tax provision from continuing operations during fiscal year 2017 and fiscal 2016 was $0.8 million and $0.5 million, respectively. Our income tax benefit for fiscal 2015 was $1.5 million. The effective income tax rates for continuing operations during fiscal 2017, 2016, and 2015, were 13.3%, 8.8%, and (20.9)%, respectively. The difference between the effective tax rates as compared to the U.S. federal statutory rate of 34% during 2017, 2016, and 2015 is primarily driven by the impact of recording a valuation allowance against all of our U.S. state and federal net deferred tax assets, repatriation of foreign earnings, changes in our geographical distribution of income (loss), and our recording of uncertain tax positions with respect to ASC 740-30, Income Taxes - Other Considerations or Special Areas (“ASC 740-30”).

As of May 27, 2017, we had approximately $4.2 million of net deferred tax assets related to federal net operating loss (“NOL”) carryforwards, compared to $5.7 million as of May 28, 2016. Net deferred tax assets related to domestic state NOL carryforwards amounted to approximately $3.0 million, compared to $2.7 million during fiscal 2016. Net deferred tax assets related to foreign NOL carryforwards totaled approximately $0.7 million with various or indefinite expiration dates. The amount of net deferred tax assets related to foreign NOL carryforwards was $0.6 million for fiscal 2016. We also have a domestic net deferred tax asset of $3.8 million of foreign tax credit carryforwards as of May 27, 2017, compared to $0.3 million as of May 28, 2016. The changes in balances from prior year for the federal NOL carryforwards was driven by current year taxable losses which was offset by income that was generated from a dividend from Richardson Electronics China during the first quarter of fiscal 2017. The dividend also drove the increase in the foreign tax credit carryforward. We do not have any alternative minimum tax credit carryforward as of May 27, 2017.

We have historically determined that certain undistributed earnings of our foreign subsidiaries, to the extent of cash available, will be repatriated to the U.S. Accordingly, we have provided a deferred tax liability totaling $5.7 million and $6.7 million as of May 27, 2017 and May 28, 2016, respectively, on foreign earnings of $39.5 million and $48.7 million, respectively. The decrease year over year primarily relates to the realization of the income from the Richardson Electronics China dividend which was previously accounted for at May 28, 2016 as part of our undistributed earnings liability for foreign subsidiaries. In addition, as of May 27, 2017, $6.4 million of cumulative positive earnings of some of our foreign subsidiaries are still considered permanently reinvested pursuant to ASC 740-30, Income Taxes - Other Considerations or Special Areas (“ASC 740-30”). Due to various tax attributes that are continuously changing, it is not practicable to determine what, if any, tax liability might exist if such earnings were to be repatriated.

Management assesses the available positive and negative evidence to estimate if sufficient future taxable income will be generated to use the existing deferred tax assets. A significant component of objective evidence evaluated was the cumulative income or loss incurred in each jurisdiction over the three-year period ended May 27, 2017. Such objective evidence limits the ability to consider subjective evidence such as future income projections. We considered other positive evidence in determining the need for a valuation allowance in the U.S. including the repatriation of foreign earnings which we do not consider permanently reinvested in certain of our foreign subsidiaries. The weight of this positive evidence is not sufficient to outweigh other negative evidence in evaluating our need for a valuation allowance in the U.S. jurisdiction.

As of May 27, 2017, a valuation allowance of $8.5 million has been established to record only the portion of the deferred tax asset that will more likely than not be realized. There has been an increase in the valuation allowance from May 28, 2016 in the amount of $2.6 million. The valuation allowance relates to deferred tax assets in foreign jurisdictions where historical taxable losses have been incurred. We also recorded a valuation allowance for all domestic federal and state net deferred tax assets considering the significant cumulative losses in the U.S. jurisdiction, the reversal of the deferred tax liability for foreign earnings, and no forecast of additional U.S. income. The amount of the deferred tax asset considered realizable, however, could be adjusted if estimates of future taxable income during the carryforward period are increased, or if objective negative evidence in the form of cumulative losses is no longer present and additional weight may be given to subjective evidence such as our projections for growth.

Income taxes paid, including foreign estimated tax payments, were $0.4 million, $0.7 million, and $0.5 million, during fiscal 2017, 2016, and 2015, respectively.

In the normal course of business, we are subject to examination by taxing authorities throughout the world. Generally, years prior to fiscal 2007 are closed for examination under the statute of limitation for U.S. federal, U.S. state and local, or non-U.S. tax jurisdictions. We are under examination in the state of Illinois for fiscal years 2011 through 2013. We are currently under examination in Germany (fiscal 2011 through 2014) and Thailand (fiscal 2008 through 2011). Our primary foreign tax jurisdictions are Germany and the Netherlands. We have tax years open in Germany beginning in fiscal 2011 and the Netherlands beginning in fiscal 2011.

The uncertain tax positions from continuing operations as of May 27, 2017 and May 28, 2016, totaled $0.0 million and $0.1 million, respectively. We record penalties and interest relating to uncertain tax positions in the income tax expense line item within the unaudited consolidated statements of comprehensive loss. It is not expected that there will be a change in the unrecognized tax benefits within the next 12 months for which an amount can be determined.

Discontinued Operations

During fiscal 2011, we completed the sale of the assets primarily used or held for use in, and certain liabilities of our RF, Wireless, and Power Division (“RFPD”), as well as certain other Company assets, including our information technology assets, to Arrow Electronics, Inc. (“Arrow”) in exchange for $238.8 million (“the Transaction”). In accordance with Accounting Standards Codification (“ASC”) 205-20, Presentation of Financial Statements - Discontinued Operations (“ASC 205-20”), we reported the financial results of RFPD as a discontinued operation. Refer to Note 5 “Discontinued Operations” of the notes to our consolidated financial statements in Part II, Item 8 of this Annual Report on Form 10-K.

There were no discontinued operations in either fiscal 2017 or fiscal 2016. In fiscal 2015, the Company recorded an income tax provision of less than $0.1 million due to an income tax audit as a result of the Transaction. The Company has an unrecognized tax benefit for discontinued operations relating to an amended Illinois state income tax return related to the Transaction.

Liquidity, Financial Position, and Capital Resources

Our growth and cash needs have been primarily financed through income from operations and cash on hand.

Cash and cash equivalents were $55.4 million at May 27, 2017. Investments including CD’s and time deposits, classified as short-term investments were $6.4 million and long-term investments were $2.4 million including equity securities of $0.6 million. Cash and investments at May 27, 2017, consisted of $16.3 million in North America, $15.5 million in Europe, $1.5 million in Latin America, and $30.9 million in Asia/Pacific. We repatriated $11.3 million to the U.S. from China during our first quarter of fiscal 2017.

Cash and cash equivalents were $60.4 million at May 28, 2016. Investments including CD’s and time deposits, classified as short-term investments were $2.3 million and long-term investments were $7.8 million including equity securities of $0.6 million. Cash and investments at May 28, 2016, consisted of $18.1 million in North America, $12.6 million in Europe, $0.7 million in Latin America, and $39.1 million in Asia/Pacific.

We believe we will continue to have sufficient liquidity to fund our future growth strategies for our business in the foreseeable future.

Cash Flows from Operating Activities

Positive cash flow from operating activities primarily resulted from our net loss, adjusted for non-cash items, and changes in our operating assets and liabilities.

Operating activities provided $1.8 million of cash during fiscal 2017. We had net loss of $6.9 million during fiscal 2017, which included non-cash stock-based compensation expense of $0.4 million associated with the issuance of stock option awards, $0.5 million of inventory provisions, and depreciation and amortization expense of $2.7 million associated with our property and equipment as well as amortization of our intangible assets. Changes in our operating assets and liabilities was $5.4 million during fiscal 2017, due primarily to the decrease in accounts receivable of $4.2 million, the decrease in inventories of $2.4 million, the increase in our accounts payable of $1.0 million, partially offset by the decrease in accrued liabilities of $0.7 million and the increase in prepaid expenses and other assets of $1.3 million. The decrease in, or cash provided by, our inventory was primarily due to key supply chain efforts to reduce and manage inventory levels. The decrease in accounts receivable was primarily due to the collection of a large receivable during the first quarter of fiscal 2017 that was invoiced during the fourth quarter of fiscal 2016. The increase in accounts payable was primarily due to an increase in our accrual for inventory in transit from vendors. The decrease in accrued liabilities was primarily due to a reductions in incentive accruals and an asset retirement obligation in France. The increase in prepaid expenses and other assets was due to investments in our Healthcare segment and other receivables with a supplier and for the sale of assets.

Operating activities used $13.6 million of cash during fiscal 2016. We had net loss of $6.8 million during fiscal 2016, which included non-cash stock-based compensation expense of $0.5 million associated with the issuance of stock option awards and depreciation and amortization expense of $2.4 million associated with our property and equipment as well as amortization of our intangible assets. Changes in our operating assets and liabilities, net of effects of acquired business, was a use of cash of $9.7 million during fiscal 2016, due primarily to the increase in inventories of $5.2 million, the increase in accounts receivable of $3.5 million, the decrease in our accounts payable of $0.9 million, the decrease in accrued liabilities of $1.0 million, and the decrease in income tax receivable of $0.9 million. The increase, or use of cash, for our inventory was primarily due to purchases related to our power conversion and Healthcare growth initiatives. The decrease in accounts payable is due to larger purchases of fixed assets and inventory primarily related to our Healthcare initiative where shorter payment terms are required. The decrease in accrual liabilities is due primarily to a $0.7 million decrease in our severance accrual.

Cash Flows from Investing Activities

The cash flow from investing activities has consisted primarily of purchases and maturities of investments and capital expenditures.

Cash used in investing activities of $3.8 million during fiscal 2017, which included proceeds from the maturities of investments of $3.6 million, offset by the purchases of investments of $2.2 million, and $5.2 million in capital expenditures. Capital expenditures relates primarily to our Healthcare growth initiatives and capital equipment and software for our new IT system.

Cash provided by investing activities of $8.2 million during fiscal 2016, included proceeds from the maturities of investments of $27.0 million and proceeds from the sale of our building in Spain of $0.4 million, offset by the acquisition of IMES of $12.2 million, purchases of investments of $2.2 million, and $4.8 million in capital expenditures. Capital expenditures relate primarily to our Healthcare growth initiatives and capital for our new IT system.

Our purchases and proceeds from investments consist of time deposits and CDs. Purchasing of future investments may vary from period to period due to interest and foreign currency exchange rates.

Cash Flows from Financing Activities

The cash flow from financing activities primarily consists of repurchases of common stock and cash dividends paid.

Cash used in financing activities during fiscal 2017 was $3.0 million for dividends paid, which were approved by the Board of Directors.

Cash used in financing activities during fiscal 2016 was $8.0 million. This included $5.0 million of cash used to repurchase common stock and $3.1 million in dividends paid, offset by $0.1 million of proceeds from the issuance of common stock from stock option exercises. The repurchase of common stock relates to our share repurchase authorizations. Cash dividends paid of $3.1 million were approved by the Board of Directors.

All future payments of dividends are at the discretion of the Board of Directors. Dividend payments will depend on earnings, capital requirements, operating conditions, and such other factors that the Board may deem relevant.

Contractual Obligations

Contractual obligations by expiration period are presented in the table below as of May 27, 2017 (in thousands):

We believe that the existing sources of liquidity, including current cash, will provide sufficient resources to meet known capital requirements and working capital needs for the fiscal year ending June 2, 2018.

Critical Accounting Policies and Estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles (“GAAP”) requires management to make significant estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Management continuously evaluates its critical accounting policies and estimates, including the allowance for doubtful accounts, revenue recognition, inventory obsolescence, goodwill and other intangible assets, loss contingencies, and income taxes. Management bases the estimates on historical experience and on various other assumptions believed to be reasonable under the circumstances, however, actual results could differ from those estimates.

The policies discussed below are considered by management to be critical to understanding our financial position and the results of operations. Their application involves significant judgments and estimates in preparation of our consolidated financial statements. For all of these policies, management cautions that future events rarely develop exactly as forecasted, and the best estimates routinely require adjustment.

Allowance for Doubtful Accounts

Our allowance for doubtful accounts includes estimated losses that result from uncollectible receivables. The estimates are influenced by the following: continuing credit evaluation of customers’ financial conditions; aging of receivables, individually and in the aggregate; a large number of customers which are widely dispersed across geographic areas; collectability and delinquency history by geographic area; and the fact that no single customer accounts for more than 10% of net sales. Significant changes in one or more of these considerations may require adjustments affecting net income and net carrying value of accounts receivable. The allowance for doubtful accounts was approximately $0.4 million as of May 27, 2017, and $0.4 million as of May 28, 2016.

Revenue Recognition

Our product sales are recognized as revenue upon shipment, when title passes to the customer, when delivery has occurred or services have been rendered, and when collectability is reasonably assured. We also record estimated discounts and returns based on our historical experience. Our products are often manufactured to meet the specific design needs of our customers’ applications. Our engineers work closely with customers to ensure that our products will meet their needs. Our customers are under no obligation to compensate us for designing the products we sell.

Inventories

Our worldwide inventories are stated at the lower of cost or market, generally using a weighted-average cost method. Our net inventories included approximately $36.0 million of finished goods, $5.3 million of raw materials, and $1.4 million of work-in-progress as of May 27, 2017, as compared to approximately $40.0 million of finished goods, $4.4 million of raw materials, and $1.0 million of work-in-progress as of May 28, 2016.

Provisions for obsolete or slow moving inventories are recorded based upon regular analysis of stock rotation privileges, obsolescence, the exiting of certain market segments, and assumptions about future demand and market conditions. If future demand, changes in the industry, or market conditions differ from management’s estimates, additional provisions may be necessary.

We recorded provisions to our inventory reserves of $0.5 million, $0.7 million, and $0.2 million during fiscal 2017, 2016, and 2015, respectively, which were included in cost of sales. The provisions were primarily for obsolete and slow moving parts. The parts were written down to estimated realizable value.

Goodwill and Other Intangible Assets

There was $6.3 million of goodwill reported on our balance sheet at both May 27, 2017 and May 28, 2016. The goodwill balance in its entirety relates to our IMES reporting unit which is included in the Healthcare segment.

We test goodwill for impairment annually and whenever events or circumstances indicate an impairment may have occurred, such as a significant adverse change in the business climate, loss of key personnel or a decision to sell or dispose of a reporting unit.

During the fourth quarter of each fiscal year, our goodwill balances are reviewed for impairment using the first day of our fourth quarter as the measurement date. If after reviewing the totality of events or circumstances as provided in ASU 2011-08 we determine that it is not likely that the fair value of a reporting unit exceeds its carrying amount, then we test for impairment through the application of a fair value based test. We estimate the fair value of each of our reporting units based on projected future operating results, market approach, and discounted cash flows.

Our goodwill impairment testing follows the two-step process as defined in ASC 350. The first step in the process compares the fair value of the reporting unit to its carrying value. If the carrying value of the reporting unit exceeds its fair value, the second step of the impairment test is performed to measure the amount of impairment loss to be recognized. In the second step, the fair value of the reporting unit resulting from the first step of the evaluation is allocated to the fair value of all of the assets and liabilities of the reporting unit in order to determine an implied goodwill value. This allocation is similar to the purchase price allocation performed in purchase accounting. If the carrying amount of the goodwill reported exceeds the implied goodwill value, an impairment loss should be recognized in an amount equal to that excess.

After reviewing the totality of events or circumstances as provided in ASU 2011-08, we determined that it was not more likely than not that the fair value for the IMES reporting unit exceeded its carrying value. Accordingly, the first step of the two step goodwill impairment test as described in FASB ASC 350-20-35 was performed. We performed the first step of the two step impairment test using the income method, which is based on a discounted future cash flow approach that uses the significant assumptions of projected revenue, projected operational profit, terminal growth rates, and the cost of capital.

The results of our goodwill impairment test as of February 26, 2017 indicated that the value of goodwill attributed to our IMES reporting unit was not impaired. Since the acquisition of IMES in June 2015, there have been no fundamental changes in the business or market that would indicate a significant decline in the fair value since the acquisition date. In the two years since acquisition, the Company has made significant investments in the IMES business, including $6 million in capital expenditures that are expected to increase IMES’ product offerings and result in increased future sales, operating profit and cash flows.

Management’s projections used to estimate the undiscounted cash flows included increasing sales volumes from new product offerings being developed and expanded sales into new geographies and operational improvements designed to reduce costs. Changes in any of the significant assumptions used, including if the Company does not successfully achieve its operating plan, which is dependent on the creation of new product offerings, can materially affect the expected cash flows, and such impacts could result in a material non-cash impairment charge of goodwill and other long lived assets.

Although we believe our projected future operating results and cash flows and related estimates regarding fair values are based on reasonable assumptions, historically, projected operating results and cash flows have not always been achieved.

Intangible assets are initially recorded at their fair market values determined on quoted market prices in active markets, if available, or recognized valuation models. Intangible assets that have finite useful lives are amortized on a straight-line basis over their useful lives. Our intangible assets represent the fair value for trade name, customer relationships, non-compete agreements, and technology acquired in connection with the acquisitions.

Long-Lived Assets

We review property and equipment, definite-lived intangible assets, and other long-lived assets for impairment whenever adverse events or changes in circumstances indicate that the carrying amounts of such assets may not be recoverable.

If adverse events do occur, our impairment review is based on an undiscounted cash flow analysis at the lowest level at which cash flows of the long-lived assets are largely independent of other groups of our assets and liabilities. This analysis requires management judgment with respect to changes in technology, the continued success of product lines, and future volume, revenue and expense growth rates. We conduct annual reviews for idle and underutilized equipment, and review business plans for possible impairment. Impairment occurs when the carrying value of the assets exceeds the future undiscounted cash flows expected to be earned by the use of the asset or asset group. When impairment is indicated, the estimated future cash flows are then discounted to determine the estimated fair value of the asset or asset group and an impairment charge is recorded for the difference between the carrying value and the estimated fair value.

Additionally, we also evaluate the remaining useful life each reporting period to determine whether events and circumstances warrant a revision to the remaining period of depreciation or amortization. If the estimate of a long lived asset’s remaining useful life is changed, the remaining carrying amount of the asset is amortized prospectively over that revised remaining useful life. 

Loss Contingencies

We accrue a liability for loss contingencies when it is probable that a liability has been incurred and the amount can be reasonably estimated. When only a range of possible losses can be established, the most probable amount in the range is accrued. If no amount within this range is a better estimate than any other amount within the range, the minimum amount in the range is accrued. If we determine that there is at least a reasonable possibility that a loss may have been incurred, we will include a disclosure describing the contingency.

Income Taxes

We recognize deferred tax assets and liabilities based on the differences between financial statement carrying amounts and the tax bases of assets and liabilities. We regularly review our deferred tax assets for recoverability and determine the need for a valuation allowance based on a number of factors, including both positive and negative evidence. These factors include historical taxable income or loss, projected future taxable income or loss, the expected timing of the reversals of existing temporary differences, and the implementation of tax planning strategies. In circumstances where we, or any of our affiliates, have incurred three years of cumulative losses which constitute significant negative evidence, positive evidence of equal or greater significance is needed to overcome the negative evidence before a tax benefit is recognized for deductible temporary differences and loss carryforwards. See Note 9 “Income Taxes” of the notes to our consolidated financial statements in Part II, Item 8 of this Annual Report on Form 10-K for further information.

New Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09 (“ASU 2014-09”), Revenue from Contracts with Customers, which amends guidance for revenue recognition. ASU 2014-09 is principles based guidance that can be applied to all contracts with customers, enhancing comparability of revenue recognition practices across entities, industries, jurisdictions and capital markets. The core principle of the guidance is that entities should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods and services. The guidance details the steps entities should apply to achieve the core principle. In August 2015, the FASB issued an amendment to defer the effective date for all entities by one year. For public entities, ASU 2014-09 is effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period. Early adoption is permitted as of annual reporting periods beginning after December 15, 2016. Companies have the option of using either a full or modified retrospective approach in applying this standard. During fiscal 2016 and 2017, the FASB issued four additional updates which further clarify the guidance provided in ASU 2014-09.

We are evaluating the impact of the new standard on our financial statements using a three-phase approach (assessment, conversion and implementation). We are in our primary assessment stage, which included identifying revenue streams, contracts and responsible parties who create and manage those accounts, quantifying the impact of identified contracts on the financial statements and identifying internal control changes. We are in the initial stage of our assessment phase and therefore further evaluation is needed to determine the impact on our financial statements, related disclosures and controls upon adoption. We expect to finalize the primary assessment phase in the first quarter of fiscal 2018. We will complete the conversion and implementation phases during fiscal 2018 in conjunction with future interpretative guidance.

In July 2015, the FASB issued ASU No. 2015-11 (“ASU 2015-11”), Simplifying the Measurement of Inventory. ASU 2015-11 requires inventory within the scope of the ASU (e.g., first-in, first-out (“FIFO”) or average cost) to be measured using the lower of cost and net realizable value. Inventory excluded from the scope of the ASU (i.e., last-in, first-out (“LIFO”) or the retail inventory method) will continue to be measured at the lower of cost or market. The ASU also amends some of the other guidance in Topic 330, “Inventory,” to more clearly articulate the requirements for the measurement and disclosure of inventory. However, those amendments are not intended to result in any changes to current practice. ASU 2015-11 is effective for annual periods beginning after December 15, 2016, and interim periods within those annual periods. The Company does not expect adoption of ASU 2015-11 to have a material impact on the Company’s consolidated financial statements.

In November 2015, the FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes. ASU 2015-17 eliminates the prior US GAAP guidance in Topic 740, Income Taxes, that required an entity to separate deferred tax liabilities and assets between current and noncurrent amounts in a classified balance sheet. The amendments in ASU 2015-17 require that all deferred tax liabilities and assets of the same tax jurisdiction or a tax filing group, as well as any related valuation allowance, be offset and presented as a single noncurrent amount in a classified balance sheet. ASU 2015-17 is effective for annual periods beginning after December 15, 2016, and interim periods within those annual periods. In order to simplify presentation of deferred tax balances, the Company adopted this standard prospectively in the quarter ended August 27, 2016, which did not have a material impact on the Company’s results of operations, cash flows or stockholders’ equity. Periods prior to August 27, 2016 were not retrospectively adjusted.

In February 2016, the FASB issued ASU 2016-02 (“ASU 2016-02”), Leases. ASU 2016-02 establishes a right-of-use (“ROU”) model that requires a lessee to record an ROU asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. A modified retrospective transition approach is required for lessees for capital and operating leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements, with certain practical expedients available. The Company is currently evaluating the potential impact of the adoption of ASU 2016-02 on the Company’s consolidated financial statements. Upon adoption, the Company expects that the amounts recognized for the ROU asset and lease liability in the balance sheets may be material.

In March 2016, the FASB issued ASU 2016-09 (“ASU 2016-09”), Compensation - Stock Compensation: Improvements to Employee Share-Based Payment Accounting. ASU 2016-09 introduces targeted amendments intended to simplify the accounting for stock compensation. ASU 2016-09 will directly impact the tax administration of equity plans. ASU 2016-09 is effective for annual periods beginning after December 15, 2016, and interim periods within those annual periods. Early adoption is permitted and any adjustments should be reflected as of the beginning of the fiscal year that includes that interim period. The Company expects to adopt ASU 2016-09 in the first quarter of fiscal 2018, at which time we will evaluate the potential impact of the adoption of this standard on the Company’s consolidated financial statements.

In August 2016, the FASB issued ASU No. 2016-15 (“ASU 2016-15”), Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments. ASU 2016-15 will make eight targeted changes to how cash receipts and cash payments are presented and classified in the statement of cash flows. ASU 2016-15 is effective for fiscal years beginning after December 15, 2017. The new standard will require adoption on a retrospective basis unless it is impracticable to apply, in which case it would be required to apply the amendments prospectively as of the earliest date practicable. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.

In January 2017, the FASB issued ASU No. 2017-04 (“ASU 2017-04”), Simplifying the Test for Goodwill Impairment. ASU 2017-04 eliminates step 2 from the goodwill impairment test. As amended, the goodwill impairment test will consist of one step comparing the fair value of a reporting unit with its carrying amount. An entity should recognize a goodwill impairment charge for the amount by which the carrying amount exceeds the reporting unit’s fair value. An entity may still perform the optional qualitative assessment for a reporting unit to determine if it is more likely than not that goodwill is impaired. ASU 2017-04 will be effective for fiscal years and interim periods beginning after December 15, 2019. ASU 2017-04 is required to be applied prospectively and early adoption is permitted for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.

ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk

Risk Management and Market Sensitive Financial Instruments

We are exposed to many different market risks with the various industries we serve. The primary financial risk we are exposed to is foreign currency exchange, as certain operations, assets, and liabilities of ours are denominated in foreign currencies. We manage these risks through normal operating and financing activities.

The interpretation and analysis of these disclosures should not be considered in isolation since such variances in exchange rates would likely influence other economic factors. Such factors, which are not readily quantifiable, would likely also affect our operations. Additional disclosure regarding various market risks are set forth in Part I, Item 1A, “Risk Factors” of our Annual Report on this Form 10-K.

Foreign Currency Exposure

Even though we take into account current foreign currency exchange rates at the time an order is taken, our financial statements, denominated in a non-U.S. functional currency, are subject to foreign exchange rate fluctuations.

Our foreign denominated assets and liabilities are cash, accounts receivable, inventory, accounts payable and intercompany receivables and payables, as we conduct business in countries of the European Union, Asia/Pacific and, to a lesser extent, Canada and Latin America. We do manage foreign exchange exposures by using currency clauses in certain sales contracts and we also have local debt to offset asset exposures. We have not used any derivative instruments nor entered into any forward contracts in fiscal 2017, fiscal 2016, or fiscal 2015.

Had the U.S. dollar changed unfavorably 10% against various foreign currencies, foreign denominated net sales would have been lower by an estimated $9.1 million during fiscal 2017, an estimated $9.9 million during fiscal 2016, and an estimated $9.6 million during fiscal 2015. Total assets would have declined by an estimated $5.2 million as of the fiscal year ended May 27, 2017, and an estimated $6.5 million as of the fiscal year ended May 28, 2016, while the total liabilities would have decreased by an estimated $0.9 million as of the fiscal year ended May 27, 2017, and an estimated $0.9 million as of the fiscal year ended May 28, 2016.

The interpretation and analysis of these disclosures should not be considered in isolation since such variances in exchanges rates would likely influence other economic factors. Such factors, which are not readily quantifiable, would likely also affect our operations.

ITEM 8. Financial Statements and Supplementary Data

Richardson Electronics, Ltd. 

Audited Consolidated Balance Sheets

(in thousands, except per share amounts)

Richardson Electronics, Ltd.

Audited Consolidated Statements of Comprehensive Loss

(in thousands, except per share amounts)

Richardson Electronics, Ltd.

Audited Consolidated Statements of Cash Flows

(in thousands)

Richardson Electronics, Ltd.

Audited Consolidated Statements of Stockholders’ Equity

(in thousands)

Notes to Consolidated Financial Statements

(in thousands, except per share amounts)

Richardson Electronics, Ltd. is a leading global provider of engineered solutions, power grid and microwave tubes and related consumables; power conversion and RF and microwave components; high value flat panel detector solutions, replacement parts, tubes and service training for diagnostic imaging equipment; and customized display solutions. We serve customers in the alternative energy, healthcare, aviation, broadcast, communications, industrial, marine, medical, military, scientific and semiconductor markets. The Company’s strategy is to provide specialized technical expertise and “engineered solutions” based on our core engineering and manufacturing capabilities. The Company provides solutions and adds value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair through its global infrastructure.

Our products include electron tubes and related components, microwave generators, subsystems used in semiconductor manufacturing, and visual technology solutions. These products are used to control, switch or amplify electrical power signals, or are used as display devices in a variety of industrial, commercial, medical, and communication applications.

During the first quarter of fiscal 2015, we created a new strategic business unit called Richardson Healthcare (“Healthcare”). As hospitals remain under pressure to reduce costs while serving a much larger customer base, there is a growing demand for independent sources of high-value replacement parts for diagnostic imaging. Having access to parts that are tested and in stock enables hospitals to terminate expensive service contracts with the Original Equipment Manufacturers (“OEM”) and instead use third party service providers or in-house technicians. With our global infrastructure, technical sales team, and experience servicing the healthcare market, we are well positioned to take advantage of this market opportunity. Over time, our plan is to expand our position from being the leader in power grid tubes to a key player in the high-growth, high-profile healthcare industry.

We have three operating and reportable segments, which we define as follows:

The Power and Microwave Technologies Group (“PMT”), formerly called the Electron Device Group (“EDG”) prior to July 2015, provides engineered solutions and distributes electronic components to customers in alternative energy, aviation, broadcast, communications, industrial, marine, medical, military, scientific, and semiconductor markets. PMT focuses on various applications including broadcast transmission, CO2 laser cutting, diagnostic imaging, dielectric and induction heating, high energy transfer, high voltage switching, plasma, power conversion, radar, and radiation oncology. PMT also offers its customers technical services for both microwave and industrial equipment.

Canvys provides customized display solutions serving the corporate enterprise, financial, healthcare, industrial, and medical OEM markets.

Healthcare manufactures, refurbishes and distributes high value replacement parts for the healthcare market including hospitals, medical centers, asset management companies, independent service organizations, and multi-vendor service providers. Products include Diagnostic Imaging replacement parts including CT and MRI tubes, hydrogen thyratrons, klystrons, magnetrons; replacement flat panel detectors and upgrades; and additional replacement components currently under development for the diagnostic imaging service market. Through a combination of newly developed products and partnerships, service offerings, and training programs, we believe we can help our customers improve efficiency and deliver better clinical outcomes while lowering the cost of healthcare delivery.

We currently have operations in the following major geographic regions: North America, Asia/Pacific, Europe, and Latin America.

Customer Concentration: No one customer represented more than 10% of our total accounts receivable balance as of May 27, 2017. One customer represented $3.8 million, or 15%, of our total accounts receivable balance, as of May 28, 2016. This receivable was collected in the first month of our fiscal 2017. No one customer represented more than 10% of net sales for either fiscal 2017 or fiscal 2016.

Supplier Concentration: One of our suppliers represented 14% of our total cost of sales as of May 27, 2017, and 15% as of May 28, 2016. The amount owed to this supplier was approximately $2.3 million as of May 27, 2017, and $2.2 million as of May 28, 2016.

The accompanying consolidated financial statements have been prepared in accordance with U.S. GAAP for all fiscal years presented.

The consolidated financial statements include our wholly owned subsidiaries. All intercompany transactions and account balances have been eliminated in consolidation.

Our fiscal year 2017 began on May 29, 2016, and ended on May 27, 2017. Unless otherwise noted, all references to a particular year in this document shall mean our fiscal year.

Use of Estimates: The preparation of financial statements in conformity with GAAP requires management to make significant estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Management continuously evaluates its critical accounting policies and estimates, including the allowance for doubtful accounts, revenue recognition, inventory obsolescence, goodwill and other intangible assets, loss contingencies, and income taxes. Management bases the estimates on historical experience and on various other assumptions believed to be reasonable under the circumstances, however, actual results could differ from those estimates.

Fair Values of Financial Instruments: The fair values of financial instruments are determined based on quoted market prices and market interest rates as of the end of the reporting period. Our financial instruments include investments, accounts receivable, accounts payable, and accrued liabilities. The fair values of these financial instruments approximate carrying values at May 27, 2017, and May 28, 2016.

Cash and Cash Equivalents: We consider short-term, highly liquid investments that are readily convertible to known amounts of cash, and so near their maturity that they present insignificant risk of changes in value because of changes in interest rates, and that have a maturity of three months or less, when purchased, to be cash equivalents. The carrying amounts reported in the balance sheet for cash and cash equivalents approximate the fair market value of these assets.

Allowance for Doubtful Accounts: Our allowance for doubtful accounts includes estimated losses that result from uncollectible receivables. The estimates are influenced by the following: continuing credit evaluation of customers’ financial conditions; aging of receivables, individually and in the aggregate; a large number of customers which are widely dispersed across geographic areas; collectability and delinquency history by geographic area; and the fact that no single customer accounts for more than 10% of net sales. Significant changes in one or more of these considerations may require adjustments affecting net income and net carrying value of accounts receivable. The allowance for doubtful accounts was approximately $0.4 million as of both May 27, 2017, and as of May 28, 2016.

Loss Contingencies: We accrue a liability for loss contingencies when it is probable that a liability has been incurred and the amount can be reasonably estimated. When only a range of possible loss can be established, the most probable amount in the range is accrued. If no amount within this range is a better estimate than any other amount within the range, the minimum amount in the range is accrued. If we determine that there is at least a reasonable possibility that a loss may have been incurred, we will include a disclosure describing the contingency.

Revenue Recognition: Our product sales are recognized as revenue upon shipment, when title passes to the customer, when delivery has occurred or services have been rendered, and when collectability is reasonably assured. We also record estimated discounts and returns based on our historical experience. Our products are often manufactured to meet the specific design needs of our customers’ applications. Our engineers work closely with customers to ensure that our products will meet their needs. Our customers are under no obligation to compensate us for designing the products we sell.

Foreign Currency Translation: The functional currency is the local currency at all foreign locations, with the exception of Hong Kong, which the functional currency is the US dollar. Balance sheet items for our foreign entities, included in our consolidated balance sheet are translated into U.S. dollars at end-of-period spot rates. Gains and losses resulting from translation of foreign subsidiary financial statements are credited or charged directly to accumulated other comprehensive income/(loss), a component of stockholders’ equity. Revenues and expenses are translated at the current rate on the date of the transaction. Gains and losses resulting from foreign currency transactions are included in income. Foreign currency translation reflected in our consolidated statements of comprehensive loss was a loss of $0.6 million during fiscal 2017, a loss of $0.2 million during fiscal 2016, and a gain of $0.2 million during fiscal 2015.

Shipping and Handling Fees and Costs: Shipping and handling costs billed to customers are reported as revenue and the related costs are reported as a component of cost of sales.

Inventories, net: Our worldwide inventories are stated at the lower of cost or market, generally using a weighted-average cost method. Our net inventories include approximately $36.0 million of finished goods, $5.3 million of raw materials, and $1.4 million of work-in-progress as of May 27, 2017, as compared to approximately $40.0 million of finished goods, $4.4 million of raw materials, and $1.0 million of work-in-progress as of May 28, 2016. The inventory reserve as of May 27, 2017, was $3.5 million compared to $3.4 million as of May 28, 2016.

Provisions for obsolete or slow moving inventories are recorded based upon regular analysis of stock rotation privileges, obsolescence, the exiting of certain markets, and assumptions about future demand and market conditions. If future demand, changes in the industry, or market conditions differ from management’s estimates, additional provisions may be necessary.

We recorded provisions to our inventory reserves of $0.5 million, $0.7 million, and $0.2 million during fiscal 2017, 2016, and 2015, respectively, which were included in cost of sales. The provisions were principally for obsolete and slow moving parts. The parts were written down to estimated realizable value.

Income Taxes: We recognize deferred tax assets and liabilities based on the differences between financial statement carrying amounts and the tax bases of assets and liabilities. We regularly review our deferred tax assets for recoverability and determine the need for a valuation allowance based on a number of factors, including both positive and negative evidence. These factors include historical taxable income or loss, projected future taxable income or loss, the expected timing of the reversals of existing temporary differences, and the implementation of tax planning strategies. In circumstances where we, or any of our affiliates, have incurred three years of cumulative losses which constitute significant negative evidence, positive evidence of equal or greater significance is needed to overcome the negative evidence before a tax benefit is recognized for deductible temporary differences and loss carryforwards.

Investments: As of May 27, 2017, we have invested in time deposits and certificates of deposit (“CD”) in the amount of $8.2 million. Of this, $6.4 million mature in less than twelve months and $1.8 million mature in greater than twelve months. As of May 28, 2016, we had approximately $9.5 million invested in time deposits and CD’s. Of this, $2.3 million mature in less than twelve months and $7.2 million mature in greater than twelve months. The fair value of these investments is the face value of each time deposit and CD.

We also have investments in equity securities, all of which are classified as available-for-sale and are carried at their fair value based on quoted market prices. Our investments, which are included in non-current assets, had a carrying amount of $0.6 million at May 27, 2017 and at May 28, 2016. Proceeds from the sale of securities were $0.3 million during fiscal 2017, $0.3 million during fiscal 2016 and $0.2 million during fiscal 2015. We reinvested proceeds from the sale of securities, and the cost of the equity securities sold was based on a specific identification method. Gross realized gains and losses on those sales were less than $0.1 million during fiscal 2017, 2016, and 2015. Net unrealized holding losses during fiscal 2017, 2016, and 2015, were less than $0.1 million and have been included in accumulated comprehensive loss during its respective fiscal year.

Discontinued Operations: During fiscal 2011, we completed the sale of the assets primarily used or held for use in, and certain liabilities of our RF, Wireless, and Power Division (“RFPD”), as well as certain other Company assets, including our information technology assets, to Arrow Electronics, Inc. (“Arrow”) in exchange for $238.8 million, (“the Transaction”). In accordance with Accounting Standards Codification (“ASC”) 205-20, Presentation of Financial Statements - Discontinued Operations (“ASC 205-20”), we reported the financial results of RFPD as a discontinued operation.

During fiscal 2017, the Company disposed of, by sale, the PACS Display business. Based on our assessment of the criteria that must be met to qualify a disposal transaction as a discontinued operation set forth in Accounting Standards Update 2014-08, the disposal of the PACS Display business does not qualify as a discontinued operation.  

Goodwill and Other Intangible Assets: We test goodwill for impairment annually and whenever events or circumstances indicate an impairment may have occurred, such as a significant adverse change in the business climate, loss of key personnel or a decision to sell or dispose of a reporting unit.

During the fourth quarter of each fiscal year, our goodwill balances are reviewed for impairment using the first day of our fourth quarter as the measurement date. If after reviewing the totality of events or circumstances as provided in ASU 2011-08 we determine that it is not likely that the fair value of a reporting unit exceeds its carrying amount, then we test for impairment through the application of a fair value based test. We estimate the fair value of each of our reporting units based on projected future operating results, market approach, and discounted cash flows.

Our goodwill impairment testing follows the two-step process as defined in ASC 350. The first step in the process compares the fair value of the reporting unit to its carrying value. If the carrying value of the reporting unit exceeds its fair value, the second step of the impairment test is performed to measure the amount of impairment loss to be recognized. In the second step, the fair value of the reporting unit resulting from the first step of the evaluation is allocated to the fair value of all of the assets and liabilities of the reporting unit in order to determine an implied goodwill value. This allocation is similar to the purchase price allocation performed in purchase accounting. If the carrying amount of the goodwill reported exceeds the implied goodwill value, an impairment loss should be recognized in an amount equal to that excess.

Intangible assets are initially recorded at their fair market values determined on quoted market prices in active markets, if available, or recognized valuation models. Intangible assets that have finite useful lives are amortized on a straight-line basis over their useful lives. Our intangible assets represent the fair value for trade name, customer relationships, non-compete agreements, and technology acquired in connection with the acquisitions.

Property, Plant and Equipment: Property, plant and equipment are stated at cost, net of accumulated depreciation. Improvements and replacements are capitalized while expenditures for maintenance and repairs are charged to expense as incurred. Provisions for depreciation are computed using the straight-line method over the estimated useful life of the asset. Depreciation expense was approximately $2.4 million, $2.0 million, and $1.7 million during fiscal 2017, 2016, and 2015, respectively. Property, plant and equipment consist of the following (in thousands): 

Construction in progress includes $1.9 million related to our Healthcare growth initiatives. All projects are expected to be completed before the end of fiscal 2018.

Supplemental disclosure information of the estimated useful life of the assets:

We review all property, plant, and equipment for impairment when events or changes in circumstances occur which indicate a possible impairment may exist. We have concluded that our property, plant, and equipment as of May 27, 2017, were not impaired.

Accrued Liabilities: Accrued liabilities consist of the following (in thousands):

(1)  In the second quarter of fiscal year 2017, the Company executed a reduction in headcount to streamline operations and reduce costs and recorded $1.3 million of expense included in selling, general and administrative expenses for employee termination costs payable to terminated employees with employment and/or separation agreements with the Company. The changes in the severance accrual for fiscal year 2017 included provisions and payments of $1.3 million and $1.2 million, respectively. 

Warranties: We offer warranties for the limited number of specific products we manufacture. We also provide extended warranties for some products we sell that lengthen the period of coverage specified in the manufacturer’s original warranty. Our warranty terms generally range from one to three years.

We estimate the cost to perform under the warranty obligation and recognize this estimated cost at the time of the related product sale. We record expense related to our warranty obligations as cost of sales in our consolidated statements of comprehensive loss. Each quarter, we assess actual warranty costs incurred on a product-by-product basis and compare the warranty costs to our estimated warranty obligation. With respect to new products, estimates are based generally on knowledge of the products, the extended warranty period, and warranty experience.

Warranty reserves are established for costs that are expected to be incurred after the sale and delivery of products under warranty. Warranty reserves are included in accrued liabilities on our consolidated balance sheets. The warranty reserves are determined based on known product failures, historical experience, and other available evidence.

Changes in the warranty reserve during fiscal 2017 and 2016 were as follows (in thousands):

Other Non-Current Liabilities: Other non-current liabilities of $0.7 million at May 27, 2017, and $1.0 million at May 28, 2016, primarily represent employee-benefits obligations in various non-US locations.

Share-Based Compensation: We measure and recognize compensation cost at fair value for all share-based payments, including stock options. We estimate fair value using the Black-Scholes option-pricing model, which requires assumptions such as expected volatility, risk-free interest rate, expected life, and dividends. Compensation cost is recognized using a graded-vesting schedule over the applicable vesting period. Share-based compensation expense totaled approximately $0.4 million during fiscal 2017, $0.5 million during fiscal 2016, and $0.7 million during fiscal 2015.

Stock options granted generally vest over a period of five years and have contractual terms to exercise of 10 years. A summary of stock option activity is as follows (in thousands, except option prices and years):

There were 5,000 stock options exercised during fiscal 2017, with cash received of less than $0.1 million. The total intrinsic value of options exercised totaled less than $0.1 million during fiscal 2017 and 2016 and $0.2 million during fiscal 2015. The weighted average fair value of stock option grants was $1.14 during fiscal 2017, $1.21 during fiscal 2016, and $3.71 during fiscal 2015. As of May 27, 2017, total unrecognized compensation costs related to unvested stock options was approximately $0.9 million which is expected to be recognized over the remaining weighted average period of approximately three to four years. The total grant date fair value of stock options vested during fiscal 2017 was $0.5 million.

The fair value of stock options is estimated using the Black-Scholes option-pricing model with the following weighted average assumptions:

The expected volatility assumptions are based on historical experience commensurate with the expected term. The risk-free interest rate is based on the yield of a treasury note with a remaining term equal to the expected life of the stock option.

The expected stock option life assumption is based on the Securities and Exchange Commission’s (“SEC”) guidance in Staff Accounting Bulletin (“SAB”) No. 107 (“SAB No. 107”). On December 21, 2007, the SEC issued SAB No. 110 stating that they will continue to accept SAB No. 107, past the original expiration date of December 31, 2007. For stock options granted during fiscal years 2017, 2016, and 2015, we believe that our historical stock option experience does not provide a reasonable basis upon which to estimate expected term. We utilized the Safe Harbor option, or Simplified Method, to determine the expected term of these options in accordance with SAB No. 107 for options granted. We intend to continue to utilize the Simplified Method for future grants in accordance with SAB No. 110 until such time that we believe that our historical stock option experience will provide a reasonable basis to estimate an expected term.

The following table summarizes information about stock options outstanding at May 27, 2017 (in thousands, except option prices and years):