RICHARDSON ELECTRONICS, LTD. - Quarter Report: 2022 February (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

For the quarterly period ended February 26, 2022

OR

For the transition period from                      To                    

Commission File Number: 0-12906

RICHARDSON ELECTRONICS, LTD.

(Exact name of registrant as specified in its charter)

40W267 Keslinger Road, P.O. Box 393 

LaFox, Illinois 60147-0393

(Address of principal executive offices)

Registrant’s telephone number, including area code: (630) 208-2200

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    ☒ Yes ☐ No 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    ☒ Yes    ☐ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  ☐ Yes   ☒ No

As of April 5, 2022, there were outstanding 11,608,236 shares of Common Stock, $0.05 par value and 2,053,263 shares of Class B Common Stock, $0.05 par value, which are convertible into Common Stock of the registrant on a share for share basis.

TABLE OF CONTENTS

1

PART I. FINANCIAL INFORMATION

Richardson Electronics, Ltd.

Consolidated Balance Sheets

(in thousands, except per share amounts)

2

Richardson Electronics, Ltd.

Unaudited Consolidated Statements of Comprehensive Income

(in thousands, except per share amounts)

3

Richardson Electronics, Ltd.

Unaudited Consolidated Statements of Cash Flows

(in thousands)

4

Richardson Electronics, Ltd.

Unaudited Consolidated Statement of Stockholders’ Equity

(in thousands, except per share amounts)

5

6

NOTES TO UNAUDITED CONSOLIDATED FINANCIAL STATEMENTS

1.  DESCRIPTION OF THE COMPANY

Richardson Electronics, Ltd. is a leading global manufacturer of engineered solutions, power grid and microwave tubes, and related consumables; power conversion and RF and microwave components; high-value replacement parts, tubes, and service training for diagnostic imaging equipment; and customized display solutions. More than 60% of our products are manufactured in LaFox, Illinois, Marlborough, Massachusetts, or Donaueschingen, Germany, or by one of our manufacturing partners throughout the world.  All our partners manufacture to our strict specifications and per our supplier code of conduct. We serve customers in the alternative energy, healthcare, aviation, broadcast, communications, industrial, marine, medical, military, scientific, and semiconductor markets. The Company’s strategy is to provide specialized technical expertise and “engineered solutions” based on our core engineering and manufacturing capabilities. The Company provides solutions and adds value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair through its global infrastructure.

Our products include electron tubes and related components, microwave generators, subsystems used in semiconductor manufacturing and visual technology solutions. These products are used to control, switch or amplify electrical power signals, or are used as display devices in a variety of industrial, commercial, medical and communication applications.

We have three operating and reportable segments, which we define as follows:

Power and Microwave Technologies Group (“PMT”) combines our core engineered solutions capabilities, power grid and microwave tube business with new disruptive RF, Wireless and Power technologies. As a designer, manufacturer, technology partner and authorized distributor, PMT’s strategy is to provide specialized technical expertise and engineered solutions based on our core engineering and manufacturing capabilities on a global basis. We provide solutions and add value through design-in support, systems integration, prototype design and manufacturing, testing, logistics and aftermarket technical service and repair—all through our existing global infrastructure. PMT’s focus is on products for power, RF and microwave applications for customers in 5G, alternative energy, aviation, broadcast, communications, industrial, marine, medical, military, scientific and semiconductor markets. PMT focuses on various applications including broadcast transmission, CO2 laser cutting, diagnostic imaging, dielectric and induction heating, high energy transfer, high voltage switching, plasma, power conversion, radar and radiation oncology. PMT also offers its customers technical services for both microwave and industrial equipment.

Canvys provides customized display solutions serving the corporate enterprise, financial, healthcare, industrial and medical original equipment manufacturers markets. Our engineers design, manufacture, source and support a full spectrum of solutions to match the needs of our customers. We offer long term availability and proven custom display solutions that include touch screens, protective panels, custom enclosures, All-In-One computers, specialized cabinet finishes and application specific software packages and certification services. We partner with both private label manufacturing companies and leading branded hardware vendors to offer the highest quality display and touch solutions and customized computing platforms.

Healthcare manufactures, repairs, refurbishes and distributes high value replacement parts and equipment for the healthcare market including hospitals, medical centers, asset management companies, independent service organizations and multi-vendor service providers. Products include diagnostic imaging replacement parts for CT and MRI systems; replacement CT and MRI tubes; CT service training; MRI coils, cold heads and RF amplifiers; hydrogen thyratrons, klystrons, magnetrons; flat panel detector upgrades; pre-owned CT systems; and additional replacement solutions currently under development for the diagnostic imaging service market. Through a combination of newly developed products and partnerships, service offerings and training programs, we believe we can help our customers improve efficiency while lowering the cost of healthcare delivery.

We currently have operations in the following major geographic regions: North America, Asia/Pacific, Europe and Latin America.

2.  BASIS OF PRESENTATION

The accompanying unaudited consolidated financial statements have been prepared in accordance with United States Generally Accepted Accounting Principles (“GAAP”) for interim financial information and the instructions to Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all the information and notes required by GAAP for complete financial statements.

Our fiscal quarter ends on the Saturday nearest the end of the quarter-ending month. The third quarter of fiscal 2022 and fiscal 2021 both contained 13 weeks. The first nine months of fiscal 2022 and fiscal 2021 both contained 39 weeks.

In the opinion of management, all adjustments, which are of a normal and recurring nature, necessary for a fair presentation of the results of interim periods have been made. All inter-company transactions and balances have been eliminated. The unaudited consolidated financial statements presented herein include the accounts of our wholly owned subsidiaries. Certain information and

7

note disclosures normally included in financial statements prepared in accordance with GAAP have been condensed or omitted pursuant to such rules and regulations. The results of our operations for the three months and nine months ended February 26, 2022 are not necessarily indicative of the results that may be expected for the fiscal year ending May 28, 2022.

The financial information contained in this report should be read in conjunction with our Annual Report on Form 10-K for the fiscal year ended May 29, 2021, which was filed on August 2, 2021.

3.  CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Inventories, net: Our consolidated inventories were stated at the lower of cost and net realizable value, generally using a weighted-average cost method. Our net inventories include approximately $62.1 million of finished goods, $7.0 million of raw materials and $4.6 million of work-in-progress as of February 26, 2022, as compared to approximately $57.0 million of finished goods, $3.9 million of raw materials and $2.6 million of work-in-progress as of May 29, 2021.

At this time, we do not anticipate any material risks or uncertainties related to possible future inventory write-downs. Provisions for obsolete or slow-moving inventories are recorded based upon regular analysis of stock rotation privileges, obsolescence, the exiting of certain markets and assumptions about future demand and market conditions. If future demand changes in the industry, or market conditions differ from management’s estimates, additional provisions may be necessary. Inventory reserves were approximately $5.9 million as of February 26, 2022 and $5.9 million as of May 29, 2021.

Revenue Recognition: The Company’s revenue streams include distribution, manufacturing and service revenue. The distribution business does not include a separate service bundled with the product sold or sold on top of the product. Distribution typically includes products purchased from our suppliers, stocked in our warehouses and then sold to our customers. Revenue is recognized when control of the promised goods is transferred to our customers, which is simultaneous with the title transferring to the customer, in an amount that reflects the transaction price consideration that we expect to receive in exchange for those goods. Control refers to the ability of the customer to direct the use of, and obtain substantially all of, the remaining benefits from the goods. Our transaction price consideration is fixed, unless otherwise disclosed below as variable consideration. Generally, our contracts require our customers to pay for goods after we deliver products to them. Terms are generally on open account, payable net 30 days in North America, and vary throughout Asia/Pacific, Europe and Latin America subject to customary credit checks.

The Company also sells products that are manufactured or assembled in our manufacturing facility. These products can either be built to the customer’s prints/designs or are products that we stock in our warehouse to sell to any customer that places an order. The manufacturing business does not include a separate service bundled with the product sold or sold in addition to the product.

The Company recognizes services revenue when the repair, installation or training is performed. The services we provide are relatively short in duration and typically completed in one or two weeks. Therefore, at each reporting date, the amount of unbilled work is insignificant. The services revenue has consistently accounted for less than 5% of the Company’s total revenues and is expected to continue at that level.

We also record discounts taken and estimate returns based on historical experience. Our products are often manufactured to meet the specific design needs of our customers’ applications. Our engineers work closely with customers to ensure that our products will meet their needs. Our customers are under no obligation to compensate us for designing the products we sell.

Contracts with customers

A revenue contract exists once a customer purchase order is received, reviewed and accepted. Prior to accepting a customer purchase order, we review the credit worthiness of the customer. Purchase orders are deemed to meet the collectability criterion once the customer’s credit is approved.

Contract Liabilities: Contract liabilities and revenue recognized were as follows (in thousands):

The Company receives advance payments or deposits from our customers before revenue is recognized resulting in contract liabilities. Contract liabilities are included in accrued liabilities in the consolidated balance sheets.

Performance obligations and satisfaction of performance obligation in the contract

Each accepted purchase order identifies a distinct good or service as the performance obligation. The goods are generally standard products we purchased from a supplier and stocked on our shelves. They can also be customized products purchased from a supplier or products that are customized or have value added to them in house prior to shipping to the customer. Our contracts for customized products generally include termination provisions if a customer cancels its order. However, we recognize revenue at a point in time because the termination provisions do not require, upon cancelation, the customer to pay fees that are commensurate with the work performed. Each purchase order explicitly states the goods or service that we promise to transfer to the customer. The promises to the customer are limited only to those goods or service. The performance obligation is our promise to deliver both goods

8

that were produced by the Company and resale of goods that we purchase from our suppliers. Our shipping and handling activities for destination shipments are performed prior to the customer obtaining control. As such, they are not a separate promised service. For shipping point, the Company is making the election under ASC 606-10-25-18B to account for shipping and handling as activities to fulfill the promise to transfer the goods. The goods we provide to our customers are distinct in that our customers benefit from the goods we sell them through use in their own processes. Our customers are generally not resellers, but rather businesses that incorporate our products into their processes from which they generate an economic benefit. The goods are also distinct in that each item sold to the customer is clearly identified on both the purchase order and resulting invoice. Each product we sell benefits the customer independently of the other products. Each item on each purchase order from the customer can be used by the customer unrelated to any other products we provide to the customer.

Determine the transaction price and variable consideration

The transaction price for each product is the amount invoiced to the customer. Each product on a purchase order is a separate performance obligation with an observable standalone selling price. The transaction price is a fixed price per unit, except for the variable consideration. The Company elects to exclude sales tax from the transaction price.

Recognize revenue when the entity satisfies a performance obligation

We recognize revenue at a point in time when title transfers to the customer, at the shipping point for FOB shipping contracts and at the customer’s delivery location for FOB destination contracts. We believe that the transfer of title best represents when the customer obtains control of the goods. Prior to that date, we do not have right to payment, and the significant risks and rewards remain with us. The significant risks and rewards of ownership of the inventory transfer simultaneously with the transfer of title. The customer’s acceptance of the goods is based on objective measurements, not subjective.

Additional considerations

Sale with right of return:

Our return policy is available to customers in our terms and conditions found on our website www.rell.com. The policy varies by business unit. The Company allows returns with prior written authorization and we allow returns within ten days of shipment for replacement parts.  

The Company maintains a reserve for returns based on historical trends that covers all contracts and revenue streams using the expected value method because we have a large number of contracts with similar characteristics, which is considered variable consideration. The reserve for returns creates a refund liability on our balance sheet as a contra Trade Accounts Receivable as well as an asset in inventory. We value the inventory at cost due to there being minimal or no costs to the Company as we generally require the customer to pay freight and we typically do not have costs associated with activities such as relabeling or repackaging.

The reserve is considered immaterial at each balance sheet date for further consideration. Returns for defective product are typically covered by our suppliers’ warranty, thus, returns for defective product are not factored into our reserve.

Warranties:

We offer warranties for the limited number of specific products we manufacture. For further information regarding the impact of warranties see the Warranties discussion elsewhere in Note 3.

Principal versus agent considerations:

Principal versus agent guidance was considered for customized products that are provided by our suppliers versus manufactured by the Company. The Company acts as the principal as we are responsible for satisfying the performance obligation. We have primary responsibility for fulfilling the contract, we have inventory risk prior to delivery to our customer, we establish prices, our consideration is not in the form of a commission and we bear the credit risk. The Company recognizes revenue in the gross amount of consideration.

See Note 7, Segment Reporting, for a disaggregation of revenue by reportable segment and geographic region, which represents how our chief operating decision maker reviews information internally to evaluate our financial performance and to make resource allocation and other decisions for the Company.

9

Loss Contingencies: We accrue a liability for loss contingencies when it is probable that a liability has been incurred and the amount can be reasonably estimated. When only a range of possible loss can be established, the most probable amount in the range is accrued. If no amount within this range is a better estimate than any other amount within the range, the minimum amount in the range is accrued. If we determine that there is at least a reasonable possibility that a loss may have been incurred, we will include a disclosure describing the contingency.

Intangible Assets: Intangible assets are initially recorded at their fair market values determined by quoted market prices in active markets, if available, or recognized valuation models. Intangible assets that have finite useful lives are amortized over their useful lives either on a straight-line basis or over their projected future cash flows and are tested for impairment when events or changes in circumstances occur that indicate possible impairment. Our intangible assets represent the fair value for trade name, customer relationships, non-compete agreements and technology acquired in connection with the acquisitions. Intangible assets subject to amortization were as follows (in thousands):

The amortization expense associated with the intangible assets subject to amortization for the next five years is presented in the following table (in thousands): 

The weighted average number of years of amortization expense remaining is 12.2 years.

Income Taxes: We recognize deferred tax assets and liabilities based on the differences between financial statement carrying amounts and the tax bases of assets and liabilities. We regularly review our deferred tax assets for recoverability and determine the need for a valuation allowance based on a number of factors, including both positive and negative evidence. These factors include historical taxable income or loss, projected future taxable income or loss, the expected timing of the reversals of existing temporary differences and the implementation of tax planning strategies. In circumstances where we, or any of our affiliates, have incurred three years of cumulative losses which constitute significant negative evidence, positive evidence of equal or greater significance is needed to overcome the negative evidence before a tax benefit is recognized for deductible temporary differences and loss carryforwards.

10

Accrued Liabilities: Accrued liabilities consisted of the following (in thousands):

Warranties: We offer warranties for the limited number of specific products we manufacture. Our warranty terms generally range from one to three years.

We estimate the cost to perform under the warranty obligation and recognize this estimated cost at the time of the related product sale. We record expense related to our warranty obligations as cost of sales in our consolidated statements of comprehensive income. Each quarter, we assess actual warranty costs incurred on a product-by-product basis and compare the warranty costs to our estimated warranty obligation. With respect to new products, estimates are based generally on knowledge of the products and warranty experience, if a sufficient history exists.

Warranty reserves are established for costs that are expected to be incurred after the sale and delivery of products under warranty. Warranty reserves are included in accrued liabilities on our consolidated balance sheets. The warranty reserves are determined based on known product failures, historical experience and other available evidence. Warranty reserves were approximately $0.7 million as of February 26, 2022 and $0.5 million as of May 29, 2021.

4.  LEASE OBLIGATIONS AND OTHER COMMITMENTS

The Company leases real and personal property in the normal course of business under various operating leases and financing leases. The Company has two types of operating leases: leases for facility space and leases for automobiles. Most of the leased facility space is for sales and general office use. Automobile leases are used throughout the Company. The financing lease is for our computer servers.

The gross amounts of assets and liabilities related to both operating and financing leases were as follows (in thousands):

11

The components of lease costs were as follows (in thousands):