Rubicon Technology, Inc. - Annual Report: 2010 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-K

(Mark one)

Commission file number 001-33834

RUBICON TECHNOLOGY, INC.

(Exact Name of Registrant as Specified in Its Charter)

Registrant’s Telephone Number, Including Area Code: (847) 295-7000

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes  ¨    No  þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer  ¨    Accelerated filer  þ    Non-accelerated filer  ¨    Smaller reporting company  ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  þ

As of June 30, 2010, there were 17,407,728 shares of common stock outstanding held by nonaffiliates of the registrant, and the aggregate market value of the common stock (based upon the closing price of these shares on the NASDAQ Global Market) was approximately $394,981,348.

The number of shares of the registrant’s common stock outstanding as of the close of business on March 11, 2011 was 24,250,335.

Documents incorporated by reference:

Portions of the Registrant’s Proxy Statement for its Annual Meeting of Stockholders are incorporated by reference into Part III, of this Annual Report on Form 10-K provided, that if such proxy statement is not filed with the Commission within 120 days after the end of the fiscal year covered by this Form 10-K, an amendment to this Form 10-K shall be filed no later than the end of such 120-day period.

Table of Contents

TABLE OF CONTENTS

Table of Contents

PART I

All statements, other than statements of historical facts, included in this Annual Report on Form 10-K regarding our estimates, expectations, beliefs, intentions, projections or strategies for the future, results of operations, financial position, net sales, projected costs, prospects and plans and objectives of management for future operations may be “forward-looking statements” as defined in the Private Securities Litigation Reform Act of 1995. We have based these forward-looking statements on our current expectations and projections about future events and financial trends that we believe may affect our financial condition, results of operations, business strategy, short-term and long-term business operations and objectives and financial needs. These forward-looking statements can be identified by the use of terms and phrases such as “believe,” “plan,” “intend,” “anticipate,” “target,” “estimate,” “expect,” and the like, and/or future-tense or conditional constructions such as “will,” “may,” “could,” “should,” etc. (or the negative thereof). Items contemplating or making assumptions about actual or potential future sales, market size and trends or operating results also constitute forward-looking statements.

Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. Before investing in our common stock, investors should be aware that the occurrence of the risks, uncertainties and events described in the section entitled “Risk factors” and elsewhere in this Annual Report could have a material adverse effect on our business, results of operations and financial condition.

Although we believe that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are inherently subject to known and unknown risks and business, economic and other risks and uncertainties that may cause actual results to be materially different from those discussed in these forward-looking statements. Readers are urged not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report. We assume no obligation to update any forward-looking statements in order to reflect any event or circumstance that may arise after the date of this Annual Report, other than as may be required by applicable law or regulation. If one or more of these risks or uncertainties materialize, or if the underlying assumptions prove incorrect, our actual results may vary materially from those expected or projected.

This Annual Report also contains statistical data and estimates, including those relating to market size and growth rates of the markets in which we participate, that we obtained from industry publications and reports generated by market research firms. These publications typically indicate that they have obtained their information from sources they believe to be reliable, but do not guarantee the accuracy and completeness of their information. Although we have assessed the information in the publications and found it to be reasonable and believe the publications are reliable, we have not independently verified their data.

You should read this Annual Report and the documents that we reference in this Annual Report and have filed with the SEC as exhibits with the understanding that our actual future results, levels of activity, performance and events and circumstances may be materially different from what we expect.

Unless otherwise indicated, the terms “Rubicon,” the “Company,” “we,” “us,” and “our” refer to Rubicon Technology, Inc.

1

Table of Contents

OVERVIEW

We are an advanced electronic materials provider that develops, manufactures and sells monocrystalline sapphire and other innovative crystalline products for light-emitting diodes (“LEDs”), radio frequency integrated circuits (“RFICs”), blue laser diodes, optoelectronics and other optical applications. The emergence of sapphire in commercial volumes at competitive prices has enabled the development of new technologies such as high brightness (“HB”) white, blue and green LEDs and highly-integrated RFICs. We apply our proprietary crystal growth technology to produce high-quality sapphire products efficiently to supply our end-markets, and we work closely with our customers to meet their quality and delivery needs. We believe we are the leading supplier of sapphire products to the LED industry.

We are a vertically integrated manufacturer of high-quality sapphire substrates and optical windows that are used in a variety of high-growth, high-volume end-market applications. Our largest product line is two to four inch sapphire cores and wafers for use in LEDs and blue laser diodes for solid state lighting and electronic applications. In addition, we sell six inch sapphire wafers that are used for Silicon-on-Sapphire (“SOS”) RFICs, as well as products for military, aerospace, sensor and other applications. We have also extended our technology, which gives us the ability to produce cores and wafers of up to twelve inches in diameter to support next generation LED and RFIC production. We believe that LED and SOS RFIC production will follow a similar path to that of production of integrated circuits on silicon substrates, which gradually migrated to production on larger and larger substrates in order to reduce manufacturing costs. We feel that our ability to produce large diameter sapphire substrates in high volume will enable the continued advancement of the LED and RFIC markets by enabling our customers to reduce costs. We currently sell six and eight inch wafers to LED chip manufacturers for their research and development efforts toward moving production on to these larger diameter substrates. We expect six inch wafer sales to increase in 2011 as customers begin to move into production using these larger diameter substrates. We have also developed the ability to produce large diameter circular and rectangular sapphire windows for use in various optical window applications.

Our fully integrated in-house capabilities enable us to design, assemble and maintain proprietary crystal growth furnaces to grow high purity, low-stress, ultra low defect density sapphire crystals. In addition, we possess state-of-the-art capabilities in high precision core drilling, wafer slicing, surface lapping, edge bevel grinding and wafer cleaning processes. We foster a strong sense of innovation and agility in our product development teams in an attempt to develop new products more effectively and to rapidly capture market growth.

We plan to leverage our technological advantage in efficiently producing high-quality, large-diameter sapphire products to maintain our leadership position and capitalize on future growth opportunities. To attain this goal, we are investing in research and development activities, continuing to enhance our operational capabilities, increasing our brand recognition and diversifying into new market segments.

We are a Delaware corporation incorporated on February 7, 2001.

We completed an initial public offering of our shares of common stock in November 2007. Upon the completion of our initial public offering our common stock became listed on the NASDAQ Global Market under the symbol “RBCN”.

INDUSTRY OVERVIEW

Integrated circuits and other semiconductor devices have traditionally been fabricated on silicon substrates. However, for certain advanced applications, new electronic materials have emerged as the substrates of choice due to evolving integration and performance considerations. For example, sapphire is the preferred substrate material for HB white, blue and green LED applications due to its crystal lattice compatibility with the aluminum

2

Table of Contents

gallium nitride (“AlGaN”) epitaxial layers, thermal expansion properties, commercial availability and cost efficiency. Other sapphire applications include SOS integrated circuits, optical lenses and windows, and substrates for blue laser diodes.

LED applications

Advancements in solid state lighting utilizing HB white, blue and green LEDs over the past decade represent a disruptive technology in the lighting industry, providing significant performance, environmental and economic improvements compared to traditional incandescent or fluorescent lighting. For example, traditional incandescent lamps are inefficient and costly, emitting over 90% of consumed power as heat and lasting only 1,500 to 2,000 hours. Fluorescent lamps produce light by passing electricity through toxic mercury vapor, which creates an environmental disposal problem. LEDs do not contain mercury or lead and are 4.0 to 6.6 times as efficient as traditional incandescent lamps, while providing 35,000 to 50,000 hours of light. These factors, along with their durability, small form factor, excellent color performance, and decreasing costs, have led to growing demand for LEDs in applications such as small displays for mobile devices, flashes for digital cameras, backlighting units (“BLUs”) for displays used in notebook computers, desktop monitors, LCD televisions, public display signs, automotive lights, traffic signals, and general and specialty lighting. Applications using LEDs have unit volumes in the billions and are expected to grow significantly over the next several years. The majority of HB LEDs are produced on sapphire substrates. Therefore, as the HB LED market grows, we believe the sapphire substrate market will grow as well.

Mobile devices. LEDs are used in color displays for mobile phones and other portable electronics such as GPS systems, MP3 players and digital camera flashes. LEDs are well-suited for mobile devices due to their low current drain which extends battery life and durability while generating less heat. For these reasons, the vast majority of mobile devices utilize LED lighting.

LED backlighting units for large displays. LED BLUs are beginning to replace conventional fluorescent BLUs in LCD flat panel televisions, notebook computers and desktop monitors. Benefits of LED BLUs in these applications are reduced power consumption/extended battery life, thinner displays, quicker response time and better color rendition. Displays made with LED BLUs also have no toxic materials, which help electronics manufacturers to comply with environmental regulations

Automotive lighting. Automobile manufacturers are increasingly using LEDs in car and truck headlights, turning and tail light functions as well as interior lighting. Benefits include near-instant response time, reduced power usage and more stylish and effective designs. Increased LED usage in other transportation vehicles such as motorcycles and commercial jets offers additional growth potential.

Commercial signage/displays. LEDs are becoming more widely used as light sources on large signs, LED displays, and outdoor displays, such as jumbo screens used in sporting arenas and electronic billboard displays.

General Illumination. LEDs are increasingly being used for replacement lamps, architectural lighting, retail displays commercial and industrial lights, residential lighting, street lights and off grid lighting for developing countries. General illumination is expected to be one of the fastest growing applications for HB LEDs.

SOS RFIC and optical applications

SOS integrated circuits consist of a thin layer of silicon grown on a sapphire substrate and are primarily used in advanced wireless and military applications, such as RFICs. In particular, SOS RFICs are currently used in high volumes for mobile phones, broadband television set-top boxes, satellites and radiation-hardened applications for the defense industry. We believe SOS devices also represent a large potential market opportunity for sapphire due to sapphire’s outstanding properties as an insulating substrate material with outstanding thermal conductivity and crystal lattice compatibility with silicon, which, among other things, enables monolithic integration in RFICs.

3

Table of Contents

Sapphire and various fluoride materials are utilized for windows and optics for aerospace, sensor, medical and laser applications. Sapphire is used in these applications due to its wide-band transmission, superior strength, scratch resistance and high strength-to-weight ratio. Sapphire’s physical properties make it very well suited for jet fighter targeting pod windows, forward-looking infrared (“FLIR”) windows for commercial and business jets as well as unmanned air vehicles or drones, rocket domes and transparent armor for military vehicles. Sapphire substrates are also used in the production of blue laser diodes. Blue laser diode technology allows much higher data storage for HD-DVD applications. Blue laser diodes are just beginning to penetrate potentially high volume applications, such as the Blu-ray Disc DVD players and leading-edge video game systems.

Sapphire substrate industry supply chain

The production process for sapphire substrates is substantially similar to that of silicon wafers. A typical process flow consists of crystal growth, fabrication, slicing, lapping and polishing steps. Output quality is measured in flatness, desired crystal planar orientation, etch pitch density and crystalline structure uniformity. A great emphasis is placed on continuously improving yields and increasing production capacity to drive costs lower to take advantage of emerging high-volume opportunities. Device manufacturers are seeking larger diameter sapphire wafers to allow them to develop higher performance applications and achieve economies of scale. Historical methods of sapphire crystal growth, which rely on lower-volume batch processes, are less able to meet the needs of leading end-market customers for high quality crystals, demanding dimensional tolerances, high production volumes, cost efficiency and on-time delivery. Sapphire is the base material that “feeds” the entire value chain.

THE RUBICON SOLUTION

We are an advanced electronic materials provider that develops, manufactures and sells monocrystalline sapphire and other innovative crystalline products for LEDs, RFICs, blue laser diodes, optoelectronics and other optical applications. As a leading producer of sapphire and provider of other crystals, we believe that the following are our principal competitive advantages:

Proprietary technology for crystal growth

We refer to the proprietary technology, equipment and processes we use in the production of our sapphire crystals as “ES2,” which stands for “evolving science, evolving solutions.” Due to our understanding of sapphire crystal growth seeding and crystal growth furnace operational parameters, we have developed a full in-house capability to design, build and maintain ES2 crystal growth furnaces with proprietary features. Our ES2 technology enables us to maintain a highly scalable, efficient operation and to produce large diameter sapphire wafers that we believe exceed the quality of any other sapphire producer today. Our competitors primarily employ the Kyropoulos, Czochralski (“CZ”) or Edge-defined Film-fed Growth (“EFG”) method to grow sapphire crystals. We believe that our ES2 technology, which employs an enhanced Kyropoulos methodology, significantly outperforms other methods of sapphire production with respect to capital costs, operating costs, throughput, quality and diameter size. Using our ES2 technology, we currently have the capability to produce sapphire products with diameters of up to eight inches in production volumes and we have developed the capability to produce larger diameter sapphire products.

High quality sapphire products

We believe our sapphire crystal wafers are best-in-class in terms of quality. Our quality advantage is exhibited by our ability to produce crystals without defects as grain boundaries, with low density of dislocations (10-100 per square centimeter) which is significantly better than the industry standard range. According to Sapphire Material, Manufacturing, Applications by E. Dobrovinskaya, L. Lytvynov and V. Pishchik (Springer 2009), sapphire grown using other methods have grain boundaries with different angles of disorientation, and significantly larger density of dislocations (5,000-100,000 per square centimeter). Our sapphire also has ultra high (99.999%) purity levels. Our high purity sapphire helps our customers realize high yields in their

4

Table of Contents

processing. In addition, because of the high purity of our products, our customers have the ability to utilize our sapphire for optical applications requiring high transmission in the ultraviolet through mid-infrared spectral ranges. Through our operational expertise in crystal growth, post-growth processing and in-process manufacturing controls of sapphire wafer production, we are able to meet or exceed our customers’ key product specifications, such as crystalline quality, dimensional tolerances and crystal orientation, while maintaining high production yields.

Vertical integration

We possess critical know-how and proprietary processes and metrology for crystal growth and sapphire processing. We grow sapphire crystals and have extensive capabilities to process sapphire into products that meet our customers’ needs from cores to wafers and window blanks to large diameter epi-polished wafers. In the areas of fabrication and slicing, we employ high volume manufacturing techniques and utilize customized tooling and metrology to hold very tight dimensional and orientation tolerances for sapphire cores and wafers. We also have high precision lapping, edge bevel grinding and annealing capabilities for as-ground wafers and window blanks. We have proprietary six and eight inch polishing and ultra-cleaning equipment and processes for SOS RFIC and other applications that demand larger-diameter epi-polished wafers. By vertically integrating our processes, we are able to achieve significant operating efficiencies and produce high-quality, high-precision products that offer cost and quality benefits to our customers. This vertical integration also helps us expand our range of products and protect our technology and manufacturing trade secrets.

High volume and flexible manufacturing capability

We provide a high volume and stable based supply of products for our customers. We offer reliable, consistent on-time delivery to our customers through our flexible and scalable production operations. We have developed automated manufacturing and metrology platforms at each stage of our production process that allow us to increase capacity rapidly and to switch products in manufacturing easily so that we can meet our customers’ specific product demands.

Lowest total cost for customers

We compete on the quality of our products and our service levels to supplement our competitive pricing. We believe our high sustained yields, our dedication to consistent production and performance and our commitment to lasting customer relationships help assure our customers of a reliable source of high-quality sapphire products at stable prices. Our in-process quality control practices lead to predictable customer process yields, reduced inspection costs and overall high customer satisfaction. In addition, we work closely with our customers to understand their product specifications and then align our operations to meet their needs. Through close collaboration with our customers, we help them develop new applications for our advanced sapphire products and establish ourselves as a preferred supplier. As such, we believe our solution offers the lowest total cost for our customers.

STRATEGY

Our goal is to be the leading global provider of advanced monocrystalline substrate and window materials to the solid state lighting, SOS RFIC, aerospace and optical markets. We believe we currently occupy a leading position among sapphire producers worldwide in market volume for two through eight inch sapphire products for LEDs. A key element of our strategy is to increase the proportion of our shipments of four inch and greater diameter products. Many customers are developing capability to use six inch diameter substrates and we expect to see an increase in our six inch wafer sales in 2011. In 2008, we developed the capability to produce eight inch diameter products in commercial volumes. While there currently is little demand for eight inch substrates, we believe this product will play an important role in future generation LED and SOS products. We have provided eight inch wafers for research and development purposes to both the LED and SOS industry and believe we will begin shipping commercial volumes of eight inch diameter product in the first half of 2012.

5

Table of Contents

Our strategy includes the following key elements:

Extend our technology and manufacturing leadership position

We believe our specialized manufacturing processes and proprietary technology and trade secrets provide us with significant competitive advantages. We have designed and developed product, equipment and process technology platforms from which we can rapidly increase capacity and stay flexible to meet our customers’ needs. At each phase of our manufacturing process, we have developed and standardized automated equipment that employs similar processes to produce a full range of products. For example, most of our furnaces can grow sapphire crystals of the same size in various orientations to produce two through six inch wafers and cores. At our new crystal growth facility in Batavia, Illinois, we are installing larger furnaces that grow sapphire crystals larger enough to produce two through eight inch wafers and cores. This flexibility in crystal growth production reduces our operating costs and significantly improves our product development cycles. Recently, we further extended our technology and now have the ability to produce up to twelve inch cores and wafers and produce even larger diameter optical material. We intend to continue to develop advanced technology platforms to further increase the size of crystals produced and offer market-leading product specifications, while maintaining product quality and manufacturing efficiencies.

Capitalize on opportunities in high-growth markets

Our sapphire products are used in multiple applications in the high-growth LED and SOS RFIC markets. We also participate in optical market segments where sapphire and fluoride materials are being adopted rapidly in new applications. We intend to continue to expand our opportunities by adding new categories and sizes of products with the goal of providing our customers in multiple high-growth end markets with a robust set of sapphire solutions. For example, one of the largest market segment opportunities is likely to come from the solid state lighting market, which will require higher brightness, lower-cost white LEDs that require larger-size LED chips. Larger LED chips are increasingly being manufactured in volume on four and six inch sapphire wafers. Our process to manufacture large diameter, high quality sapphire wafers is well-suited to this market and we believe our processes will help enable its growth. We already produce high volumes of four and six inch sapphire products and we continue to add large diameter sapphire production capacity in anticipation of market growth, as evidenced by the addition of eight inch diameter capabilities in 2008 and twelve inch diameter capabilities in 2009. We expect that next-generation LEDs and SOS RFICs will be produced on six inch and larger sapphire wafers to further drive cost efficiencies.

Enhance operational excellence

Our unique expertise in producing high-quality sapphire products in many sizes gives us a significant edge in process and product technology. We plan to further refine our proprietary ES2 crystal growth techniques, sapphire processing platforms and process controls to produce even higher quality crystals at greater yields. Our engineering efforts focus on the capability to design, build and maintain ES2 crystal growth furnaces with new proprietary features. We seek to continuously improve our sapphire processing and material inspection capabilities. We also promote operational excellence through lowering cycle times, raising yields, and reducing overhead costs. Our ability to understand our customers’ design and manufacturing processes enhances our ability to reach these goals. We employ Six Sigma methodologies to continuously improve our operational platforms and we provide extensive training to current and new employees.

Expand our sales and marketing efforts

We plan to enhance our brand recognition worldwide by increasing our marketing and communications programs and resources. For example, we have sponsored several LED conferences and we plan to extend our sponsorships into other markets, such as SOS RFICs and aerospace. We plan to further enhance our website, extend our public relations campaigns and increase our brand visibility in trade publications and with technical

6

Table of Contents

organizations. We rely on direct sales for the majority of our business and we use multiple distribution channels to extend the reach of our sales and support teams. Although we have already entered multiple markets globally, we plan to increase the scale and geographical coverage of our sales efforts.

Penetrate new market segments

We target high growth market segments where we believe we can gain a leadership position. Although production of sapphire cores and wafers is our focus today, we intend to leverage our crystal growth and processing know-how to develop high-quality crystal products for new substrate and window applications. Sapphire is becoming increasingly popular and is replacing quartz and glass in high-performance and harsh environment applications in the aerospace, petroleum and laser industries. For example, the US military uses sapphire optical windows to construct targeting mechanisms for its jet fighters and drones and transparent armor for land vehicles. We intend to use our proprietary manufacturing technology to produce additional single crystal materials that can be used in optical applications as well as alternative substrates for certain electronic materials applications. As the electronics and optical industries continue to develop new applications that take advantage of the unique properties of both sapphire and other single crystal products, our goal is to be the provider of choice for these applications.

TECHNOLOGY

Our proprietary ES2 crystal growth technique produces high-quality sapphire crystals for use in our sapphire products. ES2 is derived from the standard Kyropoulos method of crystal growth. We developed this technique with the goal of establishing greater control over the crystal growth process while maintaining minimal temperature variations. Unlike other techniques, during the ES2 technique, the growing sapphire crystal exists in an unconstrained, low stress environment inside a closed growth chamber. The closed system allows for enhanced control of the melt, resulting in higher quality crystals. The temperature gradient between the melt and the crystal in the ES2 technique is significantly lower than in other crystal growth techniques. These aspects of the ES2 technique enable us to grow crystals that have a significantly lower dislocation density, higher crystal purity and higher uniformity than sapphire crystals grown using other techniques. The ES2 technique provides an inherent annealing process once the crystal is fully grown. This thermal annealing is an integral means of relieving stress in the crystal during the ES2 process. We believe we can readily scale our ES2 technology in a production environment while maintaining high crystal quality even as crystal boule size is increased. As a result of our proprietary ES2 technology, we believe that we currently offer the most efficient method for manufacturing large form factor, high quality sapphire in the market today.

We have automated the crystal growth process of our proprietary ES2 technique. Our furnace environments are controlled by closed-loop control systems and the overall crystal growth process is run with minimal operator intervention, which reduces the potential for human error. In addition, a single operator can supervise the control of multiple ES2 furnaces simultaneously, which reduces cost.

We believe our proprietary ES2 process provides significant advantages over other crystal growth methods such as CZ and EFG. Unlike the ES2 technique, the CZ and EFG methods grow crystals with much higher levels of stress. This stress can decrease the overall quality of the sapphire crystal and requires increased processing time to relieve this stress, which increases production costs and decreases throughput, especially in larger diameter crystals. During the EFG process, the crystal is grown in a sheet form by pulling it through a die directly from the melt; while in the CZ process, the crystal must be rotated and pulled as the aluminum oxide melt is consumed. These constrained growth environments with higher thermal gradients increase stress and decrease crystal quality.

Our research and development (“R&D”) activity plays a vital role in supporting our technology, product and revenue roadmaps. In 2010, 2009 and 2008, our R&D expenses totaled $1.1 million, $801,000 and $862,000, respectively. Our R&D is focused on three key areas: large diameter sapphire growth and fabrication; higher

7

Table of Contents

precision sapphire processing; and new crystal development. Our technical staff possesses deep and broad expertise in materials science and engineering. We also develop and utilize sophisticated metrology equipment to perform material and process characterization.

PRODUCTS

We offer a wide variety of sapphire products designed to meet the stringent specifications of our customers. Using our proprietary ES2 technology, we grow high-quality sapphire boules. We fabricate our products from the boules and sell them in four general categories: core, as-cut, as-ground and polished. We currently offer two inch, three inch, four inch, six inch and eight inch diameter wafers, in C, R, A, and M planar orientations. A sapphire crystal has multiple orientation planes resulting from its crystalline structure symmetry.

Each orientation of the crystal structure is represented by a letter and differs in lattice structure. These variations result in different chemical, electrical, and physical properties depending on the particular orientation plane. As a result, customers require different orientation planes depending on the intended application. For example, LED manufacturers typically request C plane crystals while SOS manufacturers typically request R plane crystals.

While we continue to offer all of the following products, our sales efforts are now focused on selling two through four inch cores to our polishing customers and six and eight inch polished wafers to our semiconductor device manufacturing customers.

Core

Our core product line consists of our sapphire cores drilled from sapphire boules with high-precision. In 2010, 2009 and 2008, sales of core accounted for 70%, 66% and 37% of our revenue.

As-cut

Our as-cut product line consists of sapphire cores sliced using a wire saw machine. We believe we are able to offer our customers one of the highest-precision cut sapphire wafers in the market. This is especially important to customers who require precise orientation planes for applications such as LEDs, SOS, RFICs and blue laser diodes. In 2010 and 2009, sales of as-cut wafers accounted for less than 10% of our revenue. In 2008, sales of as-cut wafers accounted for 24% of our revenue.

8

Table of Contents

As-ground

Our as-ground product line consists of cut sapphire wafers that undergo a double-sided lapping and edge grinding process. The lapping process ensures that the surface of the wafer is flat and smooth and has a high degree of parallelism. The grinding process bevels the edges of the wafers, making them more durable and less susceptible to chipping and cracking. In 2010, 2009 and 2008, sales of as-ground wafers accounted for less than 10% of our revenue.

Polished

Our polished product line consists of finely polished, ultra-clean, six and eight inch sapphire wafers. Our polished wafers undergo two polishing phases including both a mechanical and a chemical mechanical planarization phase. We believe we are currently one of very few firms offering six and eight inch, high-quality C-plane and R-plane polished wafers. In 2010, 2009 and 2008 sales of polished wafers accounted for 25%, 11% and 24% of our revenue, respectively. During 2009, our key customer for R-plane polished substrates had supply chain management challenges and also experienced decreased demand due to the global recession. As a result, our orders for R-plane polished wafers declined in 2009 compared to 2008. The LED industry began using six inch C-plane polished substrates more heavily in 2010, which resulted in increased polished wafer revenue in 2010.

Other

We also offer optically-polished windows and ground window blanks of sapphire and various fluoride compounds, such as calcium, barium and magnesium fluoride. We provide sapphire and other crystal products in many sizes, shapes and product formats for specialty applications.

MANUFACTURING

The process of growing the crystal begins by heating the raw material, aluminum oxide, until it reaches an ideal temperature above its melting point. This ideal temperature is essential for our process because it allows us to produce high-purity crystals with very low defect rates. Following the heating, a seed rod is inserted in the melted material as the material is being cooled to crystallize into a boule. Following the growth process, each boule is rigorously inspected by using polarized lighting and magnification to find imperfections, such as bubbles, dislocations and granular deposits within the crystal.

We then drill the resulting boules into cores using our custom high-precision crystal orientation equipment and proprietary processes. We use wire saws to slice each core to be of precise size and shape. These wafers are then pre-polished using precision lapping and edge-grinding equipment and then are ready to be polished into epitaxial wafers. All of these processes are performed in clean environments to reduce the chance of crystal contamination. Epi-polishing and wafer cleaning are performed in Class 10,000 and Class 100 clean-room environments, respectively.

We are dedicated to quality assurance throughout our entire operation. We employ detailed material traceability from raw material to finished product. Our quality system is certified as ISO9001:2000 and we have in-house expertise at the Six Sigma Black Belt level.

All of our long-lived assets are located in the U.S. and Malaysia.

SALES AND MARKETING

We market and sell our products through our direct sales force to customers in Asia, North America and Europe. Our direct sales force includes experienced and technically sophisticated sales professionals and

9

Table of Contents

engineers who are knowledgeable in the development, manufacturing and use of sapphire substrates, windows and other optical materials. Our sales staff works with customers during all stages of the substrate manufacturing process, from developing the precise composition of the substrate through manufacturing and processing the substrate to the customer’s specifications.

A key component of our marketing strategy is developing and maintaining strong relationships with our customers, especially at the senior management level. We achieve this through working closely with our customers to optimize our products for their production processes. In addition, we are able to develop long-term relationships with key customers through offering product specification assistance, providing direct access to enable them to evaluate and audit our operations, delivering high quality products and providing superior customer service. We believe that maintaining close relationships with senior management and providing technical support improves customer satisfaction and provides us with a competitive advantage when selling our products.

In order to increase brand recognition of our products and of Rubicon in general, we publish technical articles, advertise in trade journals, distribute promotional materials and participate in industry trade shows and conferences.

CUSTOMERS

Our principal customers are wafer polishing companies and semiconductor device manufacturers. A significant portion of our sales have been to relatively few customers. In 2010, our top three customers accounted for 46% of our revenue. In 2009, our top three customers accounted for approximately 48% of our revenue and, in 2008, our top four customers accounted for approximately 68% of our revenue. Although we are attempting to diversify and expand our customer base, we expect our sales to continue to be concentrated among a small number of customers. However, we also expect that our significant customers may change from time to time. In the year ended December 31, 2010, sales to LG Innotek, Tera Xtal Technology Corp., and Iljin Display Co, Ltd. represented approximately 17%, 15% and 14% of our revenues, respectively. In 2009, sales to Crystalwise, Tera Xtal Technology Corp., and Iljin Display Co, Ltd. represented approximately 20%, 17% and 11% of our revenues, respectively. In the year ended December 31, 2008, sales to Peregrine Semiconductor Corp., Shinkosha Co. Ltd., Crystalwise Technology, Inc., and a fourth customer represented approximately 29%, 17%, 12% and 10% of our revenues, respectively. No other customer accounted for 10% or more of our revenues during those periods.

In the year ended December 31, 2010, 90% of our sales were made to customers in Asia, 8% of our sales were made to customers in North America and 2% of our sales were made to customers in Europe. In the year ended December 31, 2009, 72% of our sales were made to customers in Asia, 25% of our sales were made to customers in North America and 3% of sales were made to customers in Europe. In the year ended December 31, 2008, 53% of our sales were made to customers in Asia, 44% of our sales were made to customers in North America and 3% of sales were made to customers in Europe. Our customer supply agreements tend to be for short periods of time, typically 90 days. Therefore, fluctuations in demand could cause our quarterly revenue to vary significantly. Our standard arrangement with most customers includes 30 day payment terms.

INTELLECTUAL PROPERTY

Our ability to compete successfully depends upon our ability to protect our proprietary technologies and other confidential information. We rely primarily upon a combination of trade secret laws and non-disclosure agreements with employees, customers and potential customers to protect our intellectual property. We have three pending patent applications with the US Patent and Trademark Office covering aspects of our core production, wafer grinding and lapping technologies. However, we believe that factors such as the technological and innovative abilities of our personnel, the success of our ongoing product development efforts and our efforts to maintain trade secret protection are more important than patents in maintaining our competitive position. We pursue the registration of certain of our trademarks in the US and currently have five registered trademarks.

10

Table of Contents

COMPETITION

We participate in an innovative, specialized and competitive industry. The products we produce must meet certain demanding requirements to succeed in the marketplace. Although we account for a significant percentage of the total market volume today, we face significant competition from other established providers of similar products as well as from potential new entrants into our markets.

We have a few competitors that compete directly with us that are of similar size or smaller than us. These companies tend to focus on providing core and as-cut products rather than offering polished products. There are a limited number of companies that are substantially larger than us that compete with us in a relatively small segment of their overall business. These larger companies tend to focus on providing polished products to customers rather than providing core, as-cut and as-ground products.

We believe that the key competitive factors in our markets are:

Although we face significant competition, we believe that our proprietary ES2 crystal growth technology and business practices allow us to compete effectively on all of the above factors.

ENVIRONMENTAL REGULATION

In our manufacturing process, we use water, oils, slurries, acids, adhesives and other industrial chemicals. We are subject to a variety of federal, state and local laws regulating the discharge of these materials into the environment or otherwise relating to the protection of the environment. These include statutory and regulatory provisions under which we are responsible for the management of hazardous materials we use and the disposition of hazardous wastes resulting from our manufacturing processes. Failure to comply with such provisions, whether intentional or inadvertent, could result in fines and other liabilities to the government or third parties, injunctions requiring us to suspend or curtail operations or other remedies, which could have a material adverse effect on our business.

EMPLOYEES

As of December 31, 2010, we had 250 full-time employees. Of these 250 employees, 228 work in technology and operations. None of our employees are represented by a labor union. We consider our employee relations to be good.

OTHER INFORMATION

You may access, free of charge, our reports filed with the SEC (for example, our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q and our Current Reports on Form 8-K and any amendments to those forms) indirectly through our Internet website (www.rubicon-es2.com). Reports filed with or furnished to the SEC will be available as soon as reasonably practicable after they are filed with or furnished to the SEC. Alternatively, if you would like a paper copy of any such SEC report (without exhibits) or document, write to Investor Relations, Rubicon Technology, Inc., 900 East Green Street, Bensenville, Illinois 60106, and a copy of such requested document will be provided to you, free of charge. The information found on our website is not part of this or any other report filed with or furnished to the SEC.

11

Table of Contents

Our business is subject to a number of important risks and uncertainties, some of which are described below. The risks described below, however, are not the only risks that we face. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial may also impair our business operations. Any of these risks may have a material adverse effect on our business, financial condition, results of operations and cash flows.

Our results of operations, financial condition and business will be harmed if we are unable to effectively match our capacity with customer demand.

The global economic crisis resulted in weak demand for LED and SOS products in late 2008 and most of 2009, causing a significant reduction in orders for our sapphire substrates. As a result, our manufacturing facilities were underutilized, which negatively impacted our gross margins and overall business. There can be no assurance that such sudden market changes will not occur again in the future adversely affecting our profitability.

Demand for our products resumed in late 2009 requiring expansion of our production capacity. Our capacity expansion involves significant risks, including the availability of capital equipment and the timing of its installation, availability and timing of required electric power, management of expansion costs, timing of production ramp-up, qualification of our new equipment and demands on management’s time. If our business does not grow fast enough to utilize this new capacity effectively, our business and financial results could be adversely affected. Conversely, delays in expanding our manufacturing capacity could impact our ability to meet future demand for our products. As a result, we might not be able to fulfill customer orders in a timely manner, which could adversely affect our customer relationships and operating results. Moreover, our efforts to increase our production capacity may not succeed in enabling us to manufacture the required quantities of our products in a timely manner or at the gross margins that we achieved in the past. There can be no assurance that we will be able to successfully reach our production, timing and cost goals for our expansion.

If LED lighting does not achieve greater market acceptance, or if alternative technologies are developed and gain market traction, prospects for our growth and profitability would be limited.

Our future success depends on increased market acceptance of LED lighting. Approximately 90% and 80% of our revenue during 2010 and 2009, respectively, was from sales of our products for use in the manufacture of LED products. Potential customers for LED lighting systems may be reluctant to adopt LED lighting as an alternative to traditional lighting technology because of its higher initial cost and relatively low light output per unit in comparison with the most powerful traditional lighting devices. In addition, our potential customers may have substantial investments and know-how related to their existing lighting technologies, and may perceive risks relating to the novelty, complexity, reliability, quality, usefulness and cost-effectiveness of LED products compared to other lighting sources available in the market. If acceptance of LED lighting does not increase significantly, then opportunities to increase our revenues and operate profitably would be limited.

Moreover, if effective new sources of light other than LED devices are developed, our current products and technologies could become less competitive or obsolete. Any of these factors could have a material and adverse impact on our growth and profitability.

The technology used in the LED industry continues to change rapidly, and if we are unable to modify our products to adapt to future changes in the LED industry we will be unable to attract or retain customers.

We do not design or manufacture LEDs. Our ability to expand into new applications in the LED market depends on continued advancement in the design and manufacture of LEDs by others. The LED industry has been characterized by a rapid rate of development of new technologies and manufacturing processes, rapid changes in customer requirements, frequent product introductions and ongoing demands for greater functionality. Our future success will depend on our ability to develop new products for use in LED applications and to adjust

12

Table of Contents

our product specifications, such as our previous development of larger diameter wafers, in response to these developments in a timely manner. If our development efforts are not successful or are delayed, or if our newly developed products do not achieve market acceptance, we may be unable to attract or retain customers and our operating results could be harmed. In addition, although sapphire is currently the preferred substrate material for HB white, blue and green LED applications, we cannot assure you that the LED market will continue to demand the performance attributes of sapphire. Silicon carbide is another substrate material currently used for certain LED applications, including some that also use sapphire substrates. Other substrates being investigated and used in research and development for certain LED applications are aluminum nitride, zinc oxide and bulk gallium nitride. Research is also ongoing for the use of silicon substrates in LED applications. If sapphire is displaced as the substrate of choice for certain LED applications, our financial condition and results of operations would be materially and adversely affected unless we were able to successfully offer the competing substrate material.

Our continuing efforts to enhance our current products and to develop new products involve several risks, including:

If the development and acceptance of our products for the SOS RFIC market do not meet our expectations, our future operating results may be harmed.

The level of market acceptance of our SOS RFIC products may impact our future operating results. Our success in the SOS RFIC market depends on a number of factors, including:

In addition, it is possible that other solutions, such as silicon-on-insulator, may become preferred over SOS. We cannot assure you that the RFIC market will continue to require the performance attributes of SOS solutions. If our products are not accepted more broadly in the RFIC market, our results of operations and business may be harmed.

The average selling prices of sapphire products have historically been volatile.

Historically, our industry has experienced volatility in product demand and pricing. Changes in average selling prices of our products as a result of competitive pricing pressures, increased sales discounts and new product introductions by our competitors could have a significant impact on our profitability. Although we attempt to optimize our product mix, introduce new products, reduce manufacturing costs and pass along certain increases in costs to our customers in order to lessen the effect of decreases in selling prices, we may not be able to successfully do so in a timely manner and our results of operations and business may be harmed.

We depend on a few customers for a major portion of our sales and our results of operations would be adversely impacted if they reduced their order volumes.

Historically, we have earned, and believe that in the future we will continue to earn, a substantial portion of our revenue from a small number of customers. In 2010 and 2009, three customers each accounted for 10% or

13

Table of Contents

more of our revenues. In 2010, sales to LG Innotek, Tera Xtal Technology Corp., and Iljin Display Co, Ltd. represented approximately 17%, 15% and 14% of our revenues, respectively. In 2009, sales to Crystalwise, Tera Xtal Technology Corp., and Iljin Display Co, Ltd. represented approximately 20%, 17% and 11% of our revenues, respectively. If we were to lose one of our major customers or have a major customer significantly reduce its volume of business with us, our revenues and profitability would be materially reduced unless we are able to replace such demand with other orders promptly. We expect to continue to be dependent on our significant customers, the number and identity of which may change from period to period.

We generally sell our products on the basis of purchase orders. Delays in product orders could cause our quarterly revenue to vary significantly. A number of factors could cause our customers to cancel or defer orders, including interruptions to their operations due to a downturn in their industries, natural disasters, delays in manufacturing their own product offerings into which our products are incorporated, securing other sources for the products that we manufacture or developing such products internally.

Our manufacturing processes may be interrupted or our production may be delayed if we cannot maintain sufficient electrical supply, which could adversely affect our business, financial condition and operating results.

Our manufacturing process requires a stable source of electricity. From time to time, we have experienced limited disruptions in our supply of electricity. Such disruptions, depending upon their duration, could result in a significant drop in throughput and yield of in-process crystal boules and create delays in our production. Although we use generators and other back-up sources of electricity, these replacement sources of electricity are only capable of providing effective back-up for limited periods of time. We cannot assure you that we will be successful in avoiding future disruptions in power or in mitigating the effects of such disruptions. Any material disruption in electrical supply could delay our production and could adversely affect our business, financial condition and operating results.

Our gross margins and profitability may be adversely affected by rising energy costs.

Most of our power consumption takes place in our crystal growth facilities in the U.S. Electricity prices could increase due to overall changes to the price of energy due to conditions in the Middle East, natural gas shortages in the U.S. and other economic conditions and uncertainties regarding the outcome and implications of such events. Once our current agreements expire, if electricity prices increase significantly, we may not be able to pass these price increases through to our customers on a timely basis, if at all, which could adversely affect our gross margins and results of operations.

Our future operating results may fluctuate significantly, which makes our future results difficult to predict and could cause our operating results for particular periods to fall below expectations.

Our revenues and operating results have fluctuated in the past and are likely to fluctuate in the future. These fluctuations are due to a number of factors, many of which are beyond our control. These factors include, among others:

14

Table of Contents

The foregoing factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly or annual operating results. If our revenues or operating results fall below the expectations of investors or any securities analysts that may publish research on our company, the price of our common stock would likely decline.

Our gross margins could decline as a result of changes in our product mix and other factors, which may adversely impact our operating results.

We anticipate that our gross margins will fluctuate from period to period as a result of the mix of products that we sell in any given period. If our sales mix shifts to lower margin products in future periods, our overall gross margin levels and operating results would be adversely impacted. Increased competition and the adoption of alternatives to our products, more complex engineering requirements, lower demand and other factors may lead to a further downward shift in our product margins, leading to price erosion and lower revenues for us in the future.

Our proprietary intellectual property rights may not adequately protect our products and technologies, and the failure to protect such rights could harm our competitive position and adversely affect our operating results.

To protect our technology, we have chosen to rely primarily on trade secrets rather than seeking protection through publicly filed patents. Trade secrets are inherently difficult to protect. While we believe we use reasonable efforts to protect our trade secrets, our directors, employees, consultants or contractors may unintentionally or willfully disclose our information to competitors, whether during or after the termination of their services to our company. If we were to seek to enforce a claim that a third party had illegally obtained and was using our trade secrets, it would be expensive and time consuming, and the outcome would be unpredictable. In addition, courts outside the United States are sometimes less willing to protect trade secrets than U.S. courts. Moreover, if our competitors independently develop equivalent knowledge, methods and know-how, it will be more difficult for us to protect our intellectual property and our business could be harmed.

We have no issued patents covering our products and technologies. Although we have filed applications for three patents, there can be no assurance that these patents will be issued or that any patents issued will be of significant value to our business. Our commercial success will depend on obtaining and maintaining trade secret,

15

Table of Contents

patent and other intellectual property protection of our products and technologies. We will only be able to protect products and technologies from unauthorized use by third parties to the extent that valid, protectable and enforceable trade secrets, patents or other intellectual property rights cover them.

If we are not able to defend the trade secret or patent protection positions of our products and technologies, then we may not be able to successfully compete with competitors developing or marketing competing products and we may not generate enough revenue from product sales to justify the cost of development of our products and to achieve or maintain profitability.

The protection of our intellectual property rights and the defense of claims of infringement against us by third parties may subject us to costly litigation.

Other companies might allege that we are infringing certain of their patents or other rights. If we are unable to resolve these matters satisfactorily, or to obtain licenses on acceptable terms, we may face litigation. Any litigation to enforce patents issued to us, to protect trade secrets or know-how possessed by us or to defend us or indemnify others against claimed infringement of the rights of others could have a material adverse effect on our financial condition and operating results. Regardless of the validity or successful outcome of any such intellectual property claims, we may need to expend significant time and expense to protect our intellectual property rights or to defend against claims of infringement by third parties, which could have a material adverse effect on us. If we lose any such litigation where we are alleged to infringe the rights of others, we may be required to:

Any of these outcomes could have an adverse effect on our business, results of operations or financial condition.

The markets in which we operate are very competitive, and many of our competitors and potential competitors are larger, more established and better capitalized than we are.

The markets for selling high-quality sapphire products are very competitive and have been characterized by rapid technological change. This competition could result in increased pricing pressure, reduced profit margins, increased sales and marketing expenses, and failure to increase, or the loss of, market share or expected market share, any of which would likely seriously harm our business, operating results and financial condition.

Some of our competitors and potential competitors are substantially larger and have greater financial, technical, marketing and other resources than we do. Given their capital resources, the large companies with which we compete, or may compete in the future, are in a better position to substantially increase their manufacturing capacity and research and development efforts or to withstand any significant reduction in orders by customers in our markets. Such larger companies typically have broader product lines and market focus and thus are not as susceptible to downturns in a particular market. In addition, some of our competitors have been in operation much longer than we have and therefore may have more long-standing and established relationships with our current and potential domestic and foreign customers.

We would be at a competitive disadvantage if our competitors bring their products to market earlier, if their products are more technologically capable than ours, or if any of our competitors’ products or technologies were to become preferred in the industry. Moreover, we cannot assure you that existing or potential customers will not develop their own products, or acquire companies with products that are competitive with our products. Any of these competitive threats could have a material adverse effect on our business, operating results or financial condition.

16

Table of Contents

We are subject to risks from international sales that may harm our operating results.

In 2010 and 2009, revenue from international sales was approximately 92% and 75%, respectively, of our total revenue. We expect that revenue from international sales will continue to constitute a significant portion of our total revenue for the foreseeable future. Our international sales are subject to a variety of risks, including risks arising from:

Our future success will depend on our ability to anticipate and effectively manage these and other risks associated with our international sales. Our failure to manage any of these risks could harm our operating results.

We are dependent on the continued services and performance of our senior management, the loss of any of whom could adversely affect our business, operating results and financial condition.

Our future success is dependent on the continued services and continuing contributions of our senior management who must work together effectively in order to design our products, expand our business, increase our revenues and improve our operating results. The loss of services of senior management, particularly Raja M. Parvez, our president and chief executive officer, and William F. Weissman, our chief financial officer, could significantly delay or prevent the achievement of our development and strategic objectives. In addition, key personnel may be distracted by activities unrelated to our business. The loss of the services, or distraction, of our senior management for any reason could adversely affect our business, operating results and financial condition.

If we are unable to attract or retain qualified personnel, our business and product development efforts could be harmed.

Our success depends on our continued ability to identify, attract, hire, train, retain and motivate highly skilled technical, managerial, manufacturing, administrative and sales and marketing personnel. Competition for these individuals is intense, and we may not be able to successfully recruit, assimilate or retain sufficiently qualified personnel. In particular, we may encounter difficulties in recruiting and retaining a sufficient number of qualified technical personnel. The inability to attract and retain necessary technical, managerial, manufacturing, administrative and sales and marketing personnel could harm our ability to obtain new customers and develop new products and could adversely affect our business and operating results.

We rely on a limited number of suppliers for raw materials and key components.

We depend on a small number of suppliers for certain raw materials, components, services and equipment used in manufacturing our products, including key materials such as aluminum oxide and certain furnace components. We generally purchase these items with purchase orders, and we have no guaranteed supply arrangements with such suppliers. We are subject to variations in the cost of raw materials and consumables from

17

Table of Contents

period to period. We do not control the time and resources that these suppliers devote to our business, and we cannot be sure that these suppliers will perform their obligations to us or do so on a timely basis. In addition, some of these suppliers are located in regions of the world that may experience periods of political or economic instability.

Any significant delay in product delivery or other interruption or variation in supply from our key suppliers could prevent us from meeting demand for our products and from obtaining future business. If we were to lose key suppliers or our key suppliers were unable to support our demand, our manufacturing operations could be interrupted and we could be required to attempt to establish supply arrangements with other suppliers. In addition, the inability of our suppliers to support our demand could be indicative of a marketwide scarcity of the materials, which could result in even longer interruptions. Any such delay or interruption would impair our ability to meet our customers’ needs and, therefore, could damage our customer relationships and have a material adverse effect on our business and operating results.

Our products must meet exacting specifications, and undetected defects may occur, which may cause customers to return or stop buying our products.

Our customers establish demanding specifications for quality, performance, and reliability that our products must meet. While we inspect our products before shipment, they still may contain undetected defects. If defects occur in our products, we could experience lost revenue, increased costs, delays in, or cancellations or rescheduling of orders or shipments, product returns or discounts or damage to our reputation, any of which would harm our operating results and our business.

We are subject to numerous environmental laws and regulations, which could expose us to environmental liabilities, increase our manufacturing and related compliance costs or otherwise adversely affect our business and operating results.

In our manufacturing process, we use water, oils, slurries, acids, adhesives and other industrial chemicals. We are subject to a variety of foreign, federal, state and local laws and regulations governing the protection of the environment. These environmental laws and regulations include those relating to the use, storage, handling, discharge, emission, disposal and reporting of toxic, volatile or otherwise hazardous materials used in our manufacturing processes. These materials may have been or could be released into the environment at properties currently or previously operated by us, at other locations during the transport of the materials, or at properties to which we send substances for treatment or disposal. If we were to violate or become liable under environmental laws and regulations or become non-compliant with permits required at some of our facilities, we could be held financially responsible and incur substantial costs, including investigation and cleanup costs, fines and civil or criminal sanctions, third-party property damages or personal injury claims. In addition, new laws and regulations or stricter enforcement of existing laws and regulations could give rise to additional compliance costs and liabilities.

Our operations are concentrated in a small number of nearby facilities, and the unavailability of one or more of these facilities could harm our business.

Our manufacturing, research and development, sales and marketing, and administrative activities are concentrated in three facilities in the Chicago metropolitan area and one facility in Penang, Malaysia. Should a natural disaster, such as a tornado or flood, act or terrorism, war or outbreak of disease severely affect the Chicago area, our operations could be significantly impacted. We may not be able to replicate the manufacturing capacity and other operations of our Chicago facilities in our Malaysian facility or elsewhere, or such replication could take significant time and resources to accomplish. The disruption from such an event could adversely affect or interrupt entirely our ability to conduct our business. Similarly, should a disruption from such an event occur at our Malaysia facility, the disruption could adversely affect or interrupt our ability to conduct our business.

18

Table of Contents

We may acquire other businesses, products or technologies; if we do, we may be unable to integrate them with our business effectively or at all, which may adversely affect our business, financial condition and operating results.

If we find appropriate opportunities, we may acquire complementary businesses, product lines or technologies. However, if we acquire a business, product line or technology, the process of integration may produce unforeseen operating difficulties and expenditures and may absorb significant attention of our management that would otherwise be available for the ongoing development of our business. Further, the acquisition of a business may result in the assumption of unknown liabilities or create risks with respect to our existing relationships with suppliers and customers. If we make acquisitions, we may issue shares of stock that dilute other stockholders, expend cash, incur debt, assume contingent liabilities or create additional expenses related to amortizing intangible assets, any of which may adversely affect our business, financial condition or operating results.

We have incurred significant losses in prior periods and may incur losses in the future.

We have incurred significant losses in prior periods. As of December 31, 2010, we had an accumulated deficit of $129.8 million. While we had net income of $29.1 million in 2010 and $4.4 million in 2008, we incurred a net loss of $9.6 million in 2009 and we incurred net losses in 2007 and 2006 of $2.9 million and $7.6 million, respectively. There can be no assurance that we will have sufficient revenue growth to offset expenses or to achieve profitability in future periods.

RISKS RELATED TO OWNERSHIP OF OUR COMMON STOCK

The price of our common stock has fluctuated substantially and may continue to do so.

Our common stock has only been publicly traded since November 16, 2007, and the trading price of our common stock has fluctuated substantially. From our initial public offering through March 11, 2011, the trading price of our common stock has ranged from a low of $2.50 to a high of $35.90.

Factors related to our company and our business, as well as broad market and industry factors, may adversely affect the market price of our common stock, regardless of our actual operating performance. Factors that could cause fluctuations in our stock price include, among other things:

Fluctuations caused by factors such as these may negatively affect the market price of our common stock. In addition, the other risks described elsewhere in this prospectus could adversely affect our stock price.

Our board of directors does not intend to declare or pay any dividends to our stockholders in the foreseeable future.

The declaration, payment and amount of any future dividends will be made at the discretion of our board of directors, and will depend upon, among other things, the results of our operations, cash flows and financial

19

Table of Contents

condition, operating and capital requirements, and other factors the board of directors considers relevant. There is no plan to pay dividends in the foreseeable future, and if dividends are paid, there can be no assurance with respect to the amount of any such dividend.

The concentration of our capital stock ownership with our directors and executive officers and their affiliates will limit your ability to influence corporate matters.

Our executive officers and directors and their affiliates together own more than 24% of our outstanding capital stock and voting power. For the foreseeable future, they will have significant influence over our management and affairs and over all matters requiring stockholder approval, including the election of directors and significant corporate transactions, such as a merger or other sale of our company or our assets. Their ownership may limit your ability to influence corporate matters and, as a result, the market price of our common stock could be adversely affected.

We could be the subject of securities class action litigation due to future stock price volatility.

The stock market in general, and market prices for the securities of companies like ours, recently have experienced extreme volatility that often has been unrelated to the operating performance of the underlying companies. These broad market and industry fluctuations may adversely affect the market price of our common stock, regardless of our operating performance. When the market price of a stock declines significantly, holders of that stock have sometimes instituted securities class action litigation against the company that issued the stock. If any of our stockholders brought a lawsuit against us, our defense of the lawsuit could be costly and divert the time and attention of our management.

Our certificate of incorporation, bylaws and Delaware law may discourage takeovers and business combinations that our stockholders might consider in their best interests.

A number of provisions in our certificate of incorporation and bylaws, as well as anti-takeover provisions of Delaware law, may have the effect of delaying, deterring, preventing or rendering more difficult a change in control of Rubicon that our stockholders might consider in their best interests. These provisions include:

These provisions may prevent our stockholders from receiving the benefit from any premium to the market price of our common stock offered by a bidder in a takeover context. Even in the absence of a takeover attempt, the existence of these provisions may adversely affect the prevailing market price of our common stock if they are viewed as discouraging takeover attempts in the future.

20

Table of Contents

The foregoing provisions of our certificate of incorporation and bylaws may also make it difficult for stockholders to replace or remove our management. These provisions may facilitate management entrenchment that may delay, deter, render more difficult or prevent a change in our control, which may not be in the best interests of our stockholders.

None.

Our executive, research and development and manufacturing functions are located on properties that we lease or own. We lease properties in Franklin Park, Illinois and Bensenville, Illinois. These facilities total approximately 102,600 square feet in seven buildings, which includes 30,000 square feet in our Bensenville, Illinois facility. The leases for these facilities terminate from July 2014 through August 2015. We have completed construction of a 65,000 square foot facility in Penang, Malaysia, which will process sapphire grown by us in our Illinois facilities into finished cores and wafers. This facility is now processing cores and some wafer production began at the end of the fourth quarter of 2010. We also acquired in April 2010 a 134,400 square foot building in Batavia, Illinois to expand our crystal growth operations. This facility began operations in the fourth quarter of 2010.

In the fourth quarter 2008 and throughout 2009, the worldwide economic recession impacted our business resulting in underutilization of our facilities. During the fourth quarter 2009 and throughout 2010, our crystal growth and fabrication operations returned to full utilization. We have been adding capacity and believe that with this additional capacity our current facilities are sufficient to meet our current and expected needs.

From time to time we may be named in claims arising in the ordinary course of business. Currently, there are no legal proceedings or claims pending against us or involving us that, in the opinion of our management, could reasonably be expected to have a material adverse effect on our business or financial condition.

21

Table of Contents

PART II

Market Information.

Our common stock began trading on the NASDAQ Global Market under the symbol “RBCN” on November 16, 2007. As of March 11, 2011, our common stock was held by approximately 25 stockholders of record and there were 24,250,335 shares of our common stock outstanding. The following table sets forth the high and low sales prices for our common stock as reported on the NASDAQ Global Market for the periods indicated:

Dividend Policy

We have never declared or paid cash dividends on our common stock. We currently intend to retain future earnings to finance the growth and development of our business, and we do not anticipate declaring or paying any cash dividends in the foreseeable future.

22

Table of Contents

Performance Graph

The following graph compares the cumulative total stockholder return on our common stock during the period from November 16, 2007 (the first trading day following our initial public offering) through December 31, 2010, with the cumulative total returns of the NASDAQ Composite Index and the RDG Technology Composite Index. The graph assumes that the value of the investment in our common stock and in each of the indices (including reinvestment of dividends) was $100 on November 16, 2007.

The stock price performance reflected in this graph is not necessarily indicative of future stock price performance.

Recent Sales of Unregistered Securities

None.

Use of Proceeds

Our Registration Statement on Form S-1 (333-145880) covering the initial public offering of our shares of common stock was declared effective by the SEC on November 15, 2007.

23

Table of Contents

The net offering proceeds to us after deducting expenses totaled approximately $81.0 million. As of December 31, 2010, we had used approximately $7.6 million of the net proceeds to repay borrowings outstanding under the revolving line of credit financing agreement with Hercules Technology Growth Capital, Inc. and to pay related fees and expenses. We also have used $5.7 million to repurchase shares of our common stock, $2.0 million to purchase Series D-1 preferred shares of Peregrine Semiconductor Corp. (one of our customers) and $63.9 million on capital expenditures and $1.8 million for working capital and general corporate purposes. As of December 31, 2010, all proceeds from the initial public offering have been used.

Issuer Purchases of Equity Securities

In November 2008, we announced a repurchase plan approved by our Board of Directors authorizing the purchase of up to $15 million of our outstanding common stock over a period of two years. The stock repurchase program authorizes the Company to purchase shares of our common stock in the open market at times and prices considered appropriate by the Company depending upon prevailing market conditions and other corporate considerations. There was no stock repurchased for the three months ended December 31, 2010, and the program was terminated by its terms on December 31, 2010. The Board of Directors does not anticipate at this time adopting a new repurchase plan in 2011.

24

Table of Contents

The following selected consolidated financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes included elsewhere herein. The consolidated balance sheet data as of December 31, 2010 and 2009 and the consolidated statements of operations data for the years ended December 31, 2010, 2009 and 2008 are derived from our audited consolidated financial statements included elsewhere herein, which have been prepared in accordance with generally accepted accounting principles in the US. The consolidated balance sheet data as of December 31, 2008, 2007 and 2006 and the consolidated statements of operations data for the years ended December 31, 2007 and 2006 have been derived from our audited consolidated financial statements, which are not included in this Form 10-K.

SELECTED CONSOLIDATED FINANCIAL DATA

25

Table of Contents

The following discussion and analysis of our financial condition and results of operations should be read together with our financial statements and related notes appearing elsewhere in this annual report. This discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. You should review the “Risk Factors” section of this annual report for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements described in the following discussion and analysis.

OVERVIEW

We are an advanced electronic materials provider that develops, manufactures and sells monocrystalline sapphire and other innovative crystalline products for Light-Emitting Diodes (“LEDs”), radio frequency integrated circuits (“RFICs”), blue laser diodes, optoelectronics and other optical applications. The emergence of sapphire in commercial volumes at competitive prices has enabled the development of new technologies such as high brightness (“HB”) white, blue and green LEDs and highly-integrated RFICs. We apply our proprietary crystal growth technology to produce high-quality sapphire products efficiently to supply our end-markets, and we work closely with our customers to meet their quality and delivery needs.

We are a vertically-integrated manufacturer of high-quality sapphire substrates and optical windows that are used in a variety of high-growth, high-volume end-market applications. Our largest product line is two inch to six inch sapphire cores and wafers for use in LEDs and blue laser diodes for solid state lighting and electronic applications. For the LED market we sell two inch to four inch material primarily in core form and six and eight inch material primarily in polished wafer form. Eight inch wafers are sold primarily for research and development efforts at this time. In addition, we sell six inch sapphire wafers that are used for Silicon-on-Sapphire (“SOS”) RFICs, as well as products for military, aerospace, sensor and other applications. We have also extended our technology, which gives us the ability to produce cores and wafers of up to twelve inches in diameter to support next-generation LED and SOS RFIC production. We have also developed the ability to produce large diameter circular and rectangular sapphire windows for use in various optical window applications.

Our revenue consists of sales of sapphire materials sold in core, as-cut, as-ground and polished wafer forms in two, three, four, six and eight inch diameters as well as optical materials sold as blanks or polished windows. In 2010, our sales have been focused on core and large diameter polished wafers where our profit margins are higher. Products are made to varying specifications, such as crystal planar orientations and thicknesses.

Our revenue in the fourth quarter of 2008 and through most of 2009 was significantly impacted by the global recession. Much of the sapphire we sell into the marketplace goes into LED lighting for consumer electronics. Consumer spending on these products declined during the recession, which decreased demand for our products. Toward the end of 2009, and throughout 2010 demand for sapphire strengthened as consumers resumed spending on consumer electronics, driven, in part, by the introduction of new products such as LED backlit LCD televisions. In addition, general lighting applications for LEDs continued to expand. We expect continued strong demand throughout 2011.

We sell our products on a global basis. The Asian, North American and European markets accounted for 90%, 8% and 2%, respectively, of our revenue for the year ended December 31, 2010, 72%, 25% and 3%, respectively, of our revenue for the year ended December 31, 2009, and 53%, 44% and 3%, respectively, for the year ended December 31, 2008. Revenue declined in all markets in 2009 primarily due to the recession. In addition, our North American revenue in 2009 was impacted by lower orders in the period from our key customer in the SOS RFIC market due to a build-up of inventory at that customer. Demand from the LED market was very strong in 2010, particularly in Asia where there is a high concentration of customers that support the LED market.

26

Table of Contents

We currently depend on a small number of suppliers for certain raw materials, components, services and equipment, including key materials such as aluminum oxide and certain furnace components. If the supply of these components were to be disrupted or terminated, or if these suppliers were unable to supply the quantities of raw materials required, we may have difficulty in finding or may be unable to find alternative sources for these items. As a result, we may be unable to meet the demand for our products, which could have a material adverse impact on us.

We provide direct sales from our Bensenville, Illinois offices. Substantially all of our revenue is generated by our direct sales force and we expect this to continue in the future.

We manufacture and ship our products from our facilities in the Chicago metropolitan area and from our facility in Penang, Malaysia. We have approximately 102,600 square feet of manufacturing and office space in Franklin Park and Bensenville, Illinois. In 2010, we completed construction of a 65,000 square foot facility in Penang, Malaysia, which will process sapphire grown by us in our Illinois facilities into finished cores and wafers. This facility is processing cores and some wafer production came on line at the end of the fourth quarter of 2010. We also acquired in April 2010 a 134,400 square foot building in Batavia, Illinois to expand our crystal growth operations. This facility also began operations in the fourth quarter of 2010.

Financial operations

Revenue. Our revenue consists of sales of sapphire materials sold in core, as-cut, as-ground and polished forms in two, three, four, six and eight inch diameters as well as optical materials sold as blanks or polished windows. Products are made to varying specifications, such as crystal planar orientations and thicknesses. We have focused on increasing sales of larger diameter substrates, which we define as three inch or greater in diameter, as they generally yield higher gross margins. Average selling prices for our products declined significantly in late 2008 and early 2009 due to weak demand. Sales decreased across all product lines for the year ended December 31, 2009, due primarily to the global recession. Demand began to improve in the second half of 2009 and continued to improve throughout 2010 due to the strong demand from the LED market. Sales increased significantly across most product lines and diameters for the year ended December 31, 2010, as demand for our products increased due to improved market and pricing environment.

Historically, a significant portion of our revenue has been derived from sales to relatively few customers. For the year ended December 31, 2010, we had three customers that accounted for approximately 17%, 15%, and 14% of our revenue. For the year ended December 31, 2009, we had three customers that accounted for approximately 20%, 17%, and 11% of our revenue. For the year ended December 31, 2008, we had four customers that accounted for approximately 29%, 17%, 12% and 10% of our revenue. Other than as discussed above, none of our customers accounted for more than 10% of our revenue for such periods. Although we are attempting to diversify and expand our customer base, we expect our revenue to continue to be concentrated among a small number of customers. We expect that our significant customers may change from period to period.

We recognize revenue upon shipment to our customers. Delays in product orders or changes to the timing of shipments could cause our quarterly revenue to vary significantly. We derive a significant portion of our revenue from customers outside of the U.S. The majority of our sales are to the Asian market and we expect that region to continue to be a major source of revenue for us. All of our revenue and corresponding accounts receivable are denominated in U.S. dollars.

Cost of goods sold. Our cost of goods sold consists primarily of manufacturing materials, labor, manufacturing-related overhead such as utilities, depreciation and rent, provisions for excess and obsolete inventory reserves, freight and warranties. We manufacture our products at our Franklin Park, Bensenville and Batavia, Illinois and Penang, Malaysia manufacturing facilities based on customer orders. We purchase materials and supplies to support such demand. We are subject to variations in the cost of raw materials and consumables from period to period because we do not have long-term fixed-price agreements with most of our suppliers. For the years ended December 31, 2010, 2009 and 2008, utility costs represented approximately 13%, 12% and 13%

27

Table of Contents

of our cost of goods sold, respectively. We mitigate the potential impact of fluctuations in energy costs by entering into long term purchase agreements. Once our current agreements expire, if electricity prices increase significantly, we may not be able to pass these price increases through to our customers on a timely basis, if at all, which could adversely affect our gross margins and results of operations.

Gross profit. With the return of demand for sapphire and the resulting increase in average selling prices in late 2009, we returned to a gross profit in the fourth quarter of 2009. Demand and pricing continued to increase throughout 2010 significantly increasing gross profit. Our gross profit has been and will continue to be affected by a variety of factors, including average sales prices of our products, product mix, our ability to reduce manufacturing costs and fluctuations in the cost of electricity, raw materials and other supplies.

General and administrative expenses. General and administrative expenses (“G&A”) consist primarily of salaries and associated costs for employees in finance, human resources, information technology and administrative activities, charges for outside accounting, legal, insurance fees and stock-based compensation.

Sales and marketing expenses. Sales and marketing expenses consist primarily of salaries and associated costs for employees engaged in sales activities, commissions paid to third party representatives, product samples, charges for participation in trade shows and travel.

Research and development expenses. Research and development (“R&D”) expenses include costs related to engineering personnel, materials and other product development related costs. R&D is expensed as incurred. We believe our R&D expenses will generally increase as we continue to develop new products.

Other income (expense). Other income (expense) consists of interest income and expense and gains and losses on investments and currency translation. We repaid most of our outstanding indebtedness with a portion of the proceeds from our initial public offering in November 2007 and repaid the remainder in February 2008.

Provision for income tax. We account for income taxes under the asset and liability method whereby the expected future tax consequences of temporary differences between the book value and the tax basis of assets and liabilities are recognized as deferred tax assets and liabilities, using enacted tax rates in effect for the year in which the differences are expected to be recognized. A full valuation allowance is provided as management cannot conclude that it is more likely than not that our deferred tax assets will be realized. At December 31, 2010, we had $49.5 million in net operating loss carryforwards (“NOLs”). We have updated our analysis of ownership changes that limit the utilization of the net operating losses. This analysis shows an ownership change, but we believe that we are not restricted in our ability to use the full amount of the NOLs. As of December 31, 2010, no tax benefit has been recognized for these loss carryforwards. We expect to maintain a full valuation allowance on our remaining net deferred tax assets until an appropriate level of profitability that generates taxable income is sustained or until we are able to develop tax strategies that would enable us to conclude that it is more likely than not that a portion of our deferred tax assets will be realizable. It is possible that we will release the valuation allowance within the next twelve months. Any reversal of the valuation allowances will favorably impact our results of operations in the period of the reversal. In addition, federal and certain state and non-U.S. income taxes attributable to the fiscal year’s pre-tax income will be provided for in the period of the reversal and in subsequent periods, which will reduce net income. The Illinois State Legislature has suspended the use of net operating loss carryforwards for taxable years ending after December 31, 2010 and before December 31, 2014 and has increased the corporate income tax rate. Consequently, we expect to record income taxes in 2011 which will reduce net income.

Stock-based compensation. The majority of our stock-based compensation relates primarily to administrative personnel and is accounted for as a general and administrative expense. For the years ended December 31, 2010, 2009 and 2008, our stock-based compensation expense was $2.3 million, $937,000 and $771,000, respectively.

28

Table of Contents

RESULTS OF OPERATIONS

The following table sets forth our statements of operations for the periods indicated:

The following table sets forth our statements of operations as a percentage of revenue for the periods indicated:

29

Table of Contents

Comparison of years ended December 31, 2010 and 2009

Revenue. Revenue was $77.4 million for the year ended December 31, 2010 and $19.8 million for the year ended December 31, 2009, an increase of $57.6 million. We experienced a significant increase in revenue across most product lines and diameters due to increased demand for our products due to an improved market and pricing environment. Revenue from the sales of core products for the year ended December 31, 2010 increased by $41.3 million, of which $13.6 million was attributed to volume and $27.7 million was attributed to increased pricing. Revenue from the sales of polished products for the year ended December 31, 2010 increased by $17.0 million, of which $13.6 million was related to an increase in volume, and $3.4 million was attributed to pricing. Of that increase in revenue from the sales of polished products for the year ended December 31, 2010, $15.8 million was attributed to the increase in the sale of our LED substrate products and $1.2 million was attributed to the increase in the sale of our SOS RFIC products. Revenue for the sale of our as-cut and as-ground products decreased $1.8 million, attributed to focusing production on higher margin core and polished wafer products. We also experienced an increase in revenue from the sale of our optical products for the year ended December 31, 2010, of $1.1 million. We expect demand for our products to remain strong for 2011; however we believe it is unlikely that pricing for our products will continue to rise as they did in 2010.

Gross profit (loss). Gross profit (loss) was $41.2 million for the year ended December 31, 2010 and ($3.6) million for the year ended December 31, 2009, an increase of $44.8 million. The increase in gross profit is primarily attributable to higher revenue of $57.6 million and better utilization of equipment and staff, which led to improved operating leverage and throughput. In addition, sales of larger diameter products, which generally had a higher gross profit margin, increased by $17.0 million.

General and administrative expenses. G&A expenses were $9.9 million for the year ended December 31, 2010 and $4.8 million for the year ended December 31, 2009, an increase of $5.1 million. The increase was primarily due to an increase of employee compensation costs of $3.2 million, of which $2.1 million was from performance based bonus costs as no bonus was earned in 2009 and $1.1 million from annual salary increases and expenses associated with issuance and exercise of employee stock options. Our bad debt expense increased by $676,000 as compared to 2009 due to the considerable increase in sales volume in 2010 and due to lower than normal bad debt expense in 2009 as we were able to reduce our reserve as our customer’s improved economic condition reduced the uncertainty regarding our customer’s ability to pay an over 90 day past due receivable. We also experienced an increase in expenses of $582,000 from additional recruiting, training, travel, information technology and other miscellaneous expenses related to the startup of the Malaysian facility. In addition, franchise taxes increased by $292,000 primarily due to higher stock share count.

Sales and marketing expenses. Sales and marketing expenses were $1.3 million for the year ended December 31, 2010 and $1.1 million for the year ended December 31, 2009, an increase of $130,000. The increase in sales and marketing expenses is primarily attributable to additional employee compensation costs from additional sales hires to support expansion, annual salary increases and employee stock options expense.

Research and development expenses. R&D expenses were $1.1 million for the year ended December 31, 2010 and $801,000 for the year ended December 31, 2009, an increase of $278,000. The increase is attributable to higher employee compensation costs and an increase in spending on research projects.

Other income. Other income was $346,000 for the year ended December 31, 2010 and $738,000 for the year ended December 31, 2009, a decrease in other income of $392,000. The decrease was primarily due to a $335,000 decrease in interest income as a result of lower interest rates as well as a $20,000 loss on currency translation not incurred in 2009.

Comparison of years ended December 31, 2009 and 2008

Revenue. Revenue was $19.8 million for the year ended December 31, 2009 and $37.8 million for the year ended December 31, 2008, a decrease of $18.0 million, or 48%. The impact of the worldwide economic crisis

30

Table of Contents

resulted in lower revenue across all product lines for the year ended December 31, 2009. Revenue from the sale of our LED substrate products for the year ended December 31, 2009 decreased $7.8 million. An $8.9 million decrease in revenue due to lower average selling prices as a result of reduced demand was partially offset by an increase in volume of $1.1 million. The SOS RFIC business was also impacted by the downturn in the consumer electronics market. In addition, revenue from this market was impacted by lower orders in 2009 from our key SOS RFIC customer due to a build-up of inventory at that customer. Revenue for the SOS RFIC business decreased 81%, or $7.2 million, of which $7.1 million was attributable to a decrease in volume and $146,000, was attributable to a decrease in pricing. We completed an R&D contract in 2008 and, as a result, our revenue from research and development was $1.8 million lower in 2009 than it was in the prior year. Revenue from our optical products was lower in 2009 by $1.3 million as the market for sapphire used for sensor and instrumentation applications was also affected by the economic slowdown. Demand for our products began to improve in the second half of 2009 and our average selling prices began to increase in the fourth quarter of 2009. Fourth quarter 2009 total revenue increased 111% from the fourth quarter 2008 as the market began to rebound significantly.

Gross profit (loss). Gross profit (loss) was ($3.6) million for the year ended December 31, 2009 and $12.1 million for the year ended December 31, 2008, a decrease of $15.7 million. The revenue decline of $18.0 million in 2009 was partially offset by a reduction in manufacturing expenses of $2.3 million. We also experienced lower contract revenue of $1.8 million in 2009 which had little or no direct costs. With the decrease in orders we also experienced lower utilization of equipment and staff which resulted in underabsorbed manufacturing costs of $5.6 million. The remaining decrease in gross profit was primarily attributable to lower average selling prices. In the fourth quarter 2009, we achieved a positive gross profit margin of 12%.

General and administrative expenses. G&A expenses were $4.8 million for the year ended December 31, 2009 and $6.7 million for the year ended December 31, 2008, a decrease of $1.9 million. The decrease was primarily due an adjustment to our bad debt reserve of $1.1 million. We were able to reduce our reserve in 2009 as our customer’s improved economic condition reduced the uncertainty regarding our customer’s ability to pay us. We also experienced a decrease of $729,000 of costs associated with a follow-on public offering incurred in 2008 which did not occur in 2009, and a $515,000 decrease in bonuses as no bonus expense was incurred in 2009. The decreases were offset by $225,000 in increased legal costs, $120,000 in increased salary and stock compensation expenses, and $84,000 in higher business insurance premiums.

Sales and marketing expenses. Sales and marketing expenses were $1.1 million for the year ended December 31, 2009 and $968,000 for the year ended December 31, 2008, an increase of $169,000. The increase in sales and marketing expenses is primarily attributable to additional payroll expenses of $138,000, which includes a salesperson in the Japan sales office that opened in 2009, as well as $27,000 in costs associated with operating the sales office in Japan.

Research and development expenses. R&D expenses were $801,000 for the year ended December 31, 2009 and $862,000 for the year ended December 31, 2008, a decrease of $61,000. The decrease was primarily attributable to a decrease in payroll costs of $84,000 offset by an increase of $22,000 in materials purchased for research projects and other costs.

Other income. Other income was $738,000 for the year ended December 31, 2009 and $2.0 million for the year ended December 31, 2008, a decrease in other income of $1.3 million. The decrease was primarily due to a $1.4 million decrease in interest income as a result of lower investment principal and lower average returns.

LIQUIDITY AND CAPITAL RESOURCES

We historically funded our operations using a combination of issuances of common stock and preferred stock, a working capital line of credit, term loans and cash generated from our operations.

31

Table of Contents

As of December 31, 2010, we had cash and short term investments totaling $82.2 million, including cash of $6.0 million held in deposits at major banks, $10.1 million invested in money market funds and short term investments in commercial paper, corporate bonds, and US treasury securities of $66.1 million. Our long term investment consists of a $2.0 million investment in Peregrine Semiconductor, Corp. (one of our customers) Series D1 preferred stock. In February 2008, we began experiencing failed auctions of our entire auction-rate securities portfolio, resulting in our inability to sell these securities in the short term. We held put options associated with an agreement with UBS, AG related to all of our auction-rate securities purchased through them. We had the option to sell these securities to UBS, AG at par value from June 30, 2010 through July 2, 2012. We exercised these put options on June 30, 2010 with settlement on July 1, 2010 for a payment equal to full par value of the auction-rate securities.

Our right to sell the auction-rate securities to UBS, AG commencing on June 30, 2010, represented put options for a payment equal to the par value of the auction-rate securities. During the years ended December 31, 2010, 2009, and 2008, we recorded a realized (loss) gain of ($55,279), ($459,734) and $1,611,343 respectively, representing the changes in fair value of the put options. We also recorded during the years ended December 31, 2010, 2009, and 2008, a realized gain (loss) of $63,466, $506,504 and ($1,666,766), respectively, representing the changes in fair value of the auction-rate securities. Both the gain and loss from recording the change in fair value of the put options and auction-rate securities were recorded in gain (loss) on investments in the Consolidated Statements of Operations. The Company’s investment policy no longer allows auction-rate securities as an approved investment.

Cash flows from operating activities

Cash provided by operating activities was $24.1 million for the year ended December 31, 2010. During such period, we generated net income of $29.1 million, which included non-cash charges of $8.5 million, including depreciation expense of $6.1 million and stock-based compensation expense of $2.3 million. Cash from net working capital decreased $13.6 million, which was comprised of an increase in accounts receivable of $13.7 million due to higher sales and volumes, an increase in accounts payable of $7.1 million due to increased manufacturing production and timing of payments, an increase in other accruals of $3.6 million consisting primarily of an increase in deposits of $1.1 million from customer prepayments, and an increase in accrued payroll of $2.0 million from increased headcount and bonus accrual. There was also an increase in prepaid expenses and other current assets of $6.2 million due to an increase in purchases of furnace construction and replacement parts for both the Illinois and Malaysia facilities, and an increase in inventory of $4.5 million, of which $1.7 million was attributed to an increase in the stock of raw material.

32

Table of Contents

Cash used in operating activities was $3.3 million for the year ended December 31, 2009. During such period, we generated a net loss of $9.6 million, which included non-cash charges of $6.3 million, including depreciation expense of $5.3 million and stock-based compensation expense of $937,000. During such period, cash from net working capital increased by $106,000 which was composed of an increase in accounts receivable of $2.4 million due to higher sales in the fourth quarter, an increase of accrued other liabilities of $463,000 primarily due to the amount owed on land purchased in Malaysia, a decrease in inventory of $1.3 million due to sales product mix requirements, a decrease in spare parts of $1.4 million due to the increased usage of furnace material inventory, a decrease in accounts payable of $445,000 due to timing of ordering and payments and a decrease in accrued payroll of $162,000 attributable to the decrease in performance based bonus expenses offset by the increase in headcount.

Cash provided by operating activities was $1.5 million for the year ended December 31, 2008. During such period, we generated net income of $4.4 million, which included non-cash charges of $6.5 million, including depreciation expense of $4.5 million, net loss on disposal of equipment of $1.2 million, and stock-based compensation expense of $771,000. We experienced an increase during such period in inventory of $5.4 million due primarily to an increase in safety stocks of raw material and sapphire boule inventory of $4.2 million and an increase of $1.0 million in other work in process and finished goods inventory. There is no shelf life to our raw material and essentially all of our products can be manufactured from any one boule. Therefore, building a safety stock of this inventory enables us to quickly respond to an increase in demand from our customers. We also experienced an increase in spare parts of $2.4 million due to an increase in furnace material inventory used to support a larger number of furnaces, deferred revenue decreased by $583,000 due to recognition of revenue deferred on a research and development project, accrued payroll decreased by $637,000 on a lower performance based bonus accrual and other accrued liabilities decreased by $252,000 due to timing of payments.

Cash flows used in investing activities

Net cash provided by (used in) investing activities was ($74.7) million, $1.7 million and $4.3 million for the years ended December 31, 2010, 2009 and 2008, respectively. In 2010, we used approximately $32.5 million on building and equipment for our new crystal growth facility in Batavia, Illinois, and approximately $15.1 million on building and equipping of our new post crystal growth facility in Malaysia. We used proceeds from our common stock offering completed on June 21, 2010 of approximately $55.4 million to purchase investment securities. This was partially offset by sales of investments of $30.0 million which were used to fund operations and capital spending. In 2009, we used approximately $3.8 million to purchase components to construct additional crystal growth furnaces, approximately $645,000 to expand and upgrade our Bensenville, Illinois facility and $354,000 for other upgrades in our fabrication, slicing, and polishing operations. We also used $681,000 to purchase land in Malaysia to continue to expand our capacity. We purchased additional investments of $693,000 using investment earnings proceeds. This was offset by proceeds from sales of investments of $7.9 million. In 2008, we used approximately $12.8 million to purchase components used to construct additional crystal growth furnaces, approximately $2.0 million for infrastructure changes needed to expand operations in our Bensenville, Illinois facility and approximately $3.9 million to purchase various equipment used to expand our production capacity in support of our sales growth. We purchased additional investments of $2.0 million using investment earnings proceeds. This was partially offset by proceeds from sales of investments of $25.0 million.

We are continuing to equip our new our crystal growth facility in Illinois and post crystal growth facility in Malaysia. It is difficult to predict the timing of capital expenditures on these projects, but we anticipate spending an additional $25 to $30 million completing these two new facilities in 2011 and we estimate our total 2011 capital expenditures to be between $35 million and $45 million.

Cash flows from financing activities

Net cash provided by (used in) financing activities was $62.8 million, ($2.2) million and ($2.5) million for the years ended December 31, 2010, 2009 and 2008, respectively. Net cash provided by financing activities for

33

Table of Contents

2010 reflects $61.7 million in net proceeds from the common stock offering completed June 21, 2010, as well as proceeds from the exercise of stock options of $1.6 million partially offset by an increase in restricted cash of $525,000. Net cash used in financing activities for 2009 reflects stock repurchases of $2.6 million, partially offset by the proceeds from the exercise of stock options of $420,000. Net cash used in financing activities for 2008 reflects stock repurchases of $3.1 million, partially offset by proceeds from the exercise of stock options of $602,000.

Future liquidity requirements

We believe that our existing cash, cash equivalents, investments, and anticipated cash flows from operating activities will be sufficient to continue our expansion projects for the next twelve months. However, we may secure debt or additional equity financing over the next year to provide additional liquidity. Our cash needs include cash required to fund our operations, taking into account the capital needed to fund our planned expansions in the US and Asia. If the assumptions underlying our business plan regarding future revenues and expenses change, or if unexpected opportunities or needs arise, we may seek to raise additional cash by selling equity or convertible debt securities. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly-issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we obtain debt financing, a substantial portion of our operating cash flow may be dedicated to the payment of principal and interest on such indebtedness, and the terms of the debt securities issued could impose significant restrictions on our operations. If we are unable to obtain financing on terms favorable to us, we may be unable to successfully execute our business plan.

Contractual obligations

The contractual obligations presented in the table below represent our estimates of future payments under fixed contractual obligations and commitments at December 31, 2010. Changes in our business needs as well as actions by third parties and other factors may cause these estimates to change. Because these estimates are complex and necessarily subjective, our actual payments in future periods are likely to vary from those presented in the table. The following table sets forth information relating to our contractual obligations at December 31, 2010:

OFF-BALANCE SHEET ARRANGEMENTS

During 2010, 2009 and 2008, we did not engage in any off-balance sheet arrangements. We do not have any interest in entities referred to as variable interest entities, which includes special purpose entities and other structured finance entities.

Market risk is the risk of loss related to changes in market prices, including interest rates, of financial instruments that may adversely impact our financial position, results of operations or cash flows.

Foreign currency exchange risk. As a result of our global operations we are exposed to changes in foreign currency exchange rates which may adversely affect our results and financial position. Primary exposures are

34

Table of Contents

related to the US Dollar versus the Malaysian Ringgit. To date, substantially all of our international sales have been transacted in US dollars. While we continue to monitor this exchange risk, we are not currently entered into any foreign currency hedging transactions.

Interest rate risk. We do not have any long-term borrowings. Our investments consist of cash, cash equivalents, commercial paper, corporate bonds, and US treasury securities. The primary objective of our investment activities is to preserve principal while maximizing income without significantly increasing risk. We do not enter into investments for speculative purposes. Our investments are exposed to market risk due to a fluctuation in interest rates, which may affect our interest income and the fair market value of our investments. Due to the short-term nature of our investment portfolio, we do not believe an immediate 10% increase or decrease in interest rates would have a material effect on the fair market value of our portfolio, and therefore we do not expect our operating results or cash flows to be materially affected by a sudden change in market interest rates.

Inflation. Our operations have not been, and we do not expect them to be, materially affected by inflation. However, historically, the prices we charge our customers are market driven, and therefore we may not be able to increase our prices to offset any increase in our material or labor costs. Our inability or failure to do so could harm our business, financial condition and results of operations.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

The preparation of financial statements in accordance with accounting principles generally accepted in the US requires us to make estimates, assumptions and judgments that affect the amounts reported in our financial statements and the accompanying notes. We base our estimates on historical experience and various other assumptions that we believe to be reasonable. Although these estimates are based on our present best knowledge of the future impact on the company of current events and actions, actual results may differ from these estimates, assumptions and judgments.

We consider to be critical those accounting policies that require our most subjective or complex judgments, which often result from a need to make estimates about the effect of matters that are inherently uncertain, and that are among the most important of our accounting policies in the portrayal of our financial condition and results of operations. We believe the following to be our critical accounting policies, including the more significant estimates and assumptions used in preparation of our financial statements.

Foreign currency translation and transactions. Rubicon Worldwide LLC’s assets and liabilities are translated into US dollars at exchange rates existing at the respective balance sheet dates and capital accounts at historical exchange rates. The results of operations are translated into US dollars at the average exchange rates during the respective period. Translation adjustments resulting from fluctuations in exchange rates for Rubicon Worldwide LLC are recorded as a separate component of accumulated other comprehensive income (loss) within stockholders’ equity.

We have determined that the functional currency of Rubicon Sapphire Technology (Malaysia) SDN BHD is the US dollar. Rubicon Sapphire Technology (Malaysia) SDN BHD’s assets and liabilities are translated into US dollars using the remeasurement method. Non-monetary assets are translated at historical exchange rates and monetary assets are translated at exchange rates existing at the respective balance sheet dates. Translation adjustments for Rubicon Sapphire Technology (Malaysia) SDN BHD are included in determining net income (loss) for the period. The results of operations are translated into US dollars at the average exchange rates during the respective period. We record these gains and losses in other income (expense).

Foreign currency transaction gains and losses are generated from the effects of exchange rate changes on transactions denominated in a currency other than our functional currency, which is the US dollar. Gains and losses on foreign currency transactions are generally required to be recognized in the determination of net income (loss) for the period. We record these gains and losses in other income (expense).

35

Table of Contents

Revenue recognition. We recognize revenue from sales of products when:

All of our revenue is denominated in U.S. dollars.

Inventory. We value our inventory at the lower of cost or market. Market is determined based on net realizable value. Costs for raw materials, work in process and finished goods are based on actual costs on a first-in, first-out basis. We establish inventory reserves when conditions exist that suggest inventory may be in excess of anticipated demand or is obsolete based on customer required specifications. We evaluate the ability to realize the value of our inventory based on a combination of factors, including forecasted sales, estimated current and future market value and changes in customers’ product specifications. Inventory reserves decreased in 2010 by $896,000 primarily on disposal of obsolete inventory, resetting of standard costs on certain inventory items to net realizable value and ability to sell previously determined excess quantities. Our method of estimating excess and obsolete inventory has remained consistent for all periods presented. However, if our recognition of excess or obsolete inventory is, or if our estimates of our inventory’s potential utility become, less favorable than currently expected, additional inventory reserves may be required. We determine our normal operating capacity and record as expense costs attributable to lower utilization of equipment and staff. During the beginning of 2010 and for all of 2009, we determined we were not operating at capacity and recorded as expense costs associated with lower utilization of equipment and staff of $462,000 and $5.6 million, respectively. With the improved demand and pricing of our products, we believe that it is unlikely that significant adjustments for lower utilization of equipment and staff will occur in 2011.

Investments. We invest available cash primarily in investment grade commercial paper, corporate notes and government securities. Investments classified as available-for-sale securities are carried at fair market value with unrealized gains and losses recorded in accumulated other comprehensive income (loss). Investments in trading securities are reported at fair value, with both realized and unrealized gains and losses recorded in other income (expense), in the Consolidated Statements of Operations. Investments in which we have the ability and intent, if necessary, to liquidate in order to support our current operations are classified as short-term. Our long-term investments at December 31, 2010 consist of a $2.0 million investment in Peregrine Semiconductor, Corp. (a customer) Series D-1 Preferred shares.

We review our available-for-sale securities investments at the end of each quarter for other-than-temporary declines in fair value based on the specific identification method. We consider various factors in determining whether an impairment is other-than-temporary, including the severity and duration of the impairment, changes in underlying credit ratings, forecasted recovery, our ability and intent to hold the investment for a period of time sufficient to allow for any anticipated recovery in market value and the probability that the scheduled cash payments will continue to be made. When we conclude that an other-than-temporary impairment has resulted, the

36

Table of Contents

difference between the fair value and carrying value is written off and recorded as a charge on the Consolidated Statement of Operations. As of December 31, 2010, no impairment was recorded.

In October 2008, we entered into an agreement that provided us with the right, but not the obligation, to sell all our auction-rate securities to UBS, AG for par value during the period from June 30, 2010 to July 2, 2012 (the “ARS Put Options”). The ARS Put Options provided us with the opportunity to recover the estimated unrealized loss on our ARS investments. We recorded the fair value of the ARS Put Options upon receipt. We exercised these put options on June 30, 2010 with a settlement date of July 1, 2010. At December 31, 2010 we have no auction rate securities or put options in our investment portfolio. We valued the auction-rate securities and ARS Put Options using a discounted cash flow model that weights various factors including interest rates and expected holding period. Unrealized gains and losses related to the ARS Put Options were recognized in earnings.

Allowance for doubtful accounts. We estimate the allowance for doubtful accounts based on an assessment of the collectability of specific customer accounts. The determination of risk for collection is assessed on a customer-by-customer basis considering our historical experience and future orders with the customer, changes in payment patterns, and recent information we have about the current status of our accounts receivable balances. If we determine that a specific customer is a risk for collection, we provide a specific allowance for credit losses to reduce the net recognized receivable to the amount we reasonably believe will be collected. We believe that based on the customers to whom we sell and the nature of our agreements with them, our estimates are reasonable. Our method of estimating collectability has remained consistent for all periods presented and with past collections experience.

Stock-based compensation. We expense stock options based upon the fair market value on the date of grant. We use the Black-Scholes option pricing model to determine the fair value of stock options. The determination of the fair value of stock-based payment awards on the date of grant using an option-pricing model will be affected by assumptions regarding a number of complex and subjective variables. These variables include our expected stock volatility over the term of the awards, actual and projected employee stock option exercise behaviors, risk-free interest rates, forfeitures and expected dividends.

The expected term represents the weighted-average period that our stock options are expected to be outstanding and is based upon the vesting term of our options, a review of a peer group of companies, and expected exercise behavior. Until November 2007, we were operating as a private company, and as a result, we were unable to use our actual price volatility data. Therefore, we estimate the volatility of our common stock based on volatility of similar entities over the expected term of our stock options. We base the risk-free interest rate that we use in the option pricing model on US Treasury zero-coupon issues with remaining terms similar to the expected term on the options. We do not anticipate paying any cash dividends in the foreseeable future and, therefore, use an expected dividend yield of zero in the option pricing model. We are required to estimate forfeitures at the time of grant and revise those estimates in subsequent periods if actual forfeitures differ from those estimates. The current forfeiture rate of 27.54% was based on our past history of pre-vesting forfeitures and the forfeiture rate has remained constant.

We allocate stock based compensation costs using a straight-line method which amortizes the fair value of each option on a straight-line basis over the service period. Based on the variables affecting the valuation of our common stock and the method used for allocating compensation costs, we recognized $2.3 million in stock-based compensation expense during the year ended December 31, 2010.

All option grants made during 2010 and 2009 were granted at an exercise price per share equal to the closing market price of our common stock on the date of grant. Therefore, there is no intrinsic value because the exercise price per share of each option was equal to the fair value of the common stock on the date of grant.

Based on the fair market value of the common stock at December 31, 2010, the intrinsic value for the options outstanding was $14,832,301 and the intrinsic value for the options exercisable was $5,514,855. At December 31, 2009, the intrinsic value for the options outstanding was $23,767,706 and the intrinsic value for

37

Table of Contents

the options exercisable was $8,625,028. For more information on stock-based compensation, see Note 7 – Stock Incentive Plans to our Consolidated Financial Statements.

Income tax valuation allowance. Evaluating the need for and amount of a valuation allowance for deferred tax assets often requires significant judgment and extensive analysis of all the positive and negative evidence available to determine whether all or some portion of the deferred tax assets will not be realized. A valuation allowance must be established for deferred tax assets when it is more likely than not (a probability level of more than 50 percent) that they will not be realized. In general, “realization” refers to the incremental benefit achieved through the reduction in future taxes payable or an increase in future taxes refundable from the deferred tax assets, assuming that the underlying deductible differences and carryforwards are the last items to enter into the determination of future taxable income. In determining our valuation allowance, we consider the source of taxable income including taxable income in prior carryback years, future reversals of existing temporary differences, the required use of tax planning strategies, and future taxable income exclusive of reversing temporary differences and carryforwards. We lack a consistent earnings history, including three years of cumulative losses. In addition, pricing of our products has fluctuated wildly during our history and we will likely see continued price volatility. While we generated pre-tax earnings in 2010, there is risk in meeting our financial goals. We therefore concluded that a full valuation allowance should be maintained. We will continue in 2011 to evaluate the evidence to determine whether all or some portion of the deferred tax assets will not be realized. It is possible that we will release the valuation allowance within the next twelve months, which will favorably impact our results of operations in the period of the reversal.

RECENT ACCOUNTING PRONOUNCEMENTS

On January 21, 2010 the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) 2010-06, amending Accounting Standards Codification (ASC) 820 (formerly Statement of Financial Accounting Standards No. 157). New disclosures related to transfers in and out of Level 1 and Level 2 measurements and separate disclosures about purchases, shares, issuances, and settlements relating to Level 3 measurements are required. ASU 2010-06 clarifies existing fair value disclosures about the level of disaggregation and about inputs and valuation techniques used to measure fair value. ASU 2010-06 is effective for interim and annual reporting periods beginning after December 15, 2009, except for the Level 3 measurements disclosures about purchases, shares, issuances, and settlements which is effective for fiscal years beginning after December 15, 2010. The adoption of ASU 2010-06 did not have a material impact on the Company’s financial condition or results of operations.

Our consolidated financial statements, together with the related notes and the report of independent registered public accounting firm, are set forth on the pages indicated in Item 15 in this Annual Report on Form 10-K.

None.

Management’s Evaluation of Disclosure Controls and Procedures.

An evaluation was performed under the supervision and with the participation of our management, including our chief executive officer and chief financial officer (together, our “certifying officers”), of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of the end of the year covered by this report. Disclosure controls and procedures are controls and other procedures designed to ensure that information

38

Table of Contents

required to be disclosed by us in our periodic reports filed with the SEC is recorded, processed, summarized and reported within the time periods specified by the SEC’s rules and instructions for Form 10-K, and that the information is accumulated and communicated to our management, including the chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure. Based on their evaluation, our certifying officers concluded that these disclosure controls and procedures were effective as of December 31, 2010.

Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Our internal control system was designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of the consolidated financial statements for external purposes in accordance with generally accepted accounting principles. Based on its evaluation, management concluded that our internal controls over financial reporting were effective as of December 31, 2010. As required under this Item 9A, the management’s report titled “Management’s Assessment of Control Over Financial Reporting” is set forth in “Item 8 – Consolidated Financial Statements and Supplementary Data” and is incorporated herein by reference.

Attestation Report of the Registered Public Accounting Firm

As required under this Item 9A, the auditor’s attestation report titled “Report of Independent Registered Public Accounting Firm on Internal Control Over Financial Reporting” is set forth in “Item 8 – Consolidated Financial Statements and Supplementary Data” and is incorporated herein by reference.

Changes in Internal Controls over Financial Reporting

There have been no changes in our internal controls over financial reporting that occurred during the quarter ended December 31, 2010 that our certifying officers concluded materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

None.

39

Table of Contents

PART III

The Information required by Items 401, 405, 407(d)(4) and 407(d)(5) of Regulation S-K will be included under the captions “Election of Directors,” “Executive Officers,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Audit Committee” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. If such proxy statement is not filed with the SEC within 120 days after the end of the fiscal year covered by this Form 10-K, an amendment to this Form 10-K shall be filed not later than the end of such 120-day period.

We have adopted a Code of Ethics that applies to all of our employees, officers and directors. A copy of the Code of Ethics is available on our website at www.rubicon-es2.com, and any waiver from the Code of Ethics will be timely disclosed on the Company’s website as will any amendments to the Code of Ethics.

The information required by Item 402 of Regulation S-K will be included under the captions “Executive Compensation” and “Director Compensation” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. The information required by Item 407(e)(4) and 407(e)(5) of Regulation S-K will be included under the captions “Compensation Committee Interlocks and Insider Participation” and “Compensation Committee Report” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. If such proxy statement is not filed with the SEC within 120 days after the end of the fiscal year covered by this Form 10-K, an amendment to this Form 10-K shall be filed not later than the end of such 120-day period.

Securities Authorized for Issuance under Equity Compensation Plans

The following table represents securities authorized for issuance under our 2001 Equity Plan and our 2007 Stock Incentive Plan as of December 31, 2010.

Equity Compensation Plan Information

The information required by Item 403 of Regulation S-K will be included under the caption “Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. If such proxy statement is not filed with the SEC within 120 days after the end of the fiscal year covered by this Form 10-K, an amendment to this Form 10-K shall be filed not later than the end of such 120-day period.

40

Table of Contents

The information required by Item 404 of Regulation S-K will be included under the caption “Certain Relationships and Related Person Transactions” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. The information required by Item 407(a) of Regulation S-K will be included under the caption “Director Independence” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. If such proxy statement is not filed with the SEC within 120 days after the end of the fiscal year covered by this Form 10-K, an amendment to this Form 10-K shall be filed not later than the end of such 120-day period.

The information required by this Item will be included under the caption “Ratification of Selection of Independent Registered Public Accounting Firm” in our proxy statement for our 2011 annual meeting of stockholders and is incorporated by reference herein. If such proxy statement is not filed with the SEC within 120 days after the end of the fiscal year covered by this Form 10-K, an amendment to this Form 10-K shall be filed not later than the end of such 120-day period.

41

Table of Contents

PART IV

(a) Financial statements. The following consolidated financial statements are filed as part of this Annual Report on Form 10-K.

(b) Exhibits. The exhibits filed or incorporated by reference as a part of this report are listed in the Index to Exhibits which appears following the signature page to this Annual Report on Form 10-K and are incorporated by reference.

(c) Financial statement schedules not listed above have been omitted because they are inapplicable, are not required under applicable provisions of Regulation S-X, or the information that would otherwise be included in such schedules is contained in the registrant’s financial statements or accompanying notes.

42

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized on

March 15, 2011.

KNOWN BY ALL MEN BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Raja M. Parvez and William F. Weissman, jointly and severally, his or her attorney-in-fact, with the power of substitution, for him or her in any and all capacities, to sign any amendments to this Annual Report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his or her substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on March 15, 2011.

43

Table of Contents

EXHIBIT INDEX

The Exhibits listed below are filed or incorporated by reference as part of this Annual Report on Form 10-K.