Ryerson Holding Corp - Annual Report: 2014 (Form 10-K)

Table of Contents

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2014

OR

For the transition period from                      to                     

Commission File No. 001-34735

RYERSON HOLDING CORPORATION

(Exact name of registrant as specified in its charter)

227 W. Monroe, 27^th Floor

Chicago, Illinois 60606

(Address of principal executive offices)

(312) 292-5000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K(§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter.

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant, based on the closing price of a share of the registrant’s common stock on August 13, 2014 as reported by the New York Stock Exchange on such date was approximately $113,167,880. The registrant has elected to use August 13, 2014, which was the settlement date of our initial public offering, as the calculation date because on June 30, 2014 (the last business day of the registrant’s mostly recently completed second fiscal quarter), the registrant was a privately-held company. Shares of the registrant’s common stock held by each executive officer, director and holder of 5% or more of the outstanding common stock have been excluded in that such persons may be deemed to be affiliates. This calculation does not reflect a determination that certain persons are affiliates of the registrant for any other purpose.

Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.

As of March 16, 2015, there were 32,037,500 shares of our Common Stock, par value $0.01 per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

The information required to be furnished pursuant to Part III of this Form 10-K will be set forth in, and incorporated by reference from, the registrant’s definitive proxy statement for the annual meeting of stockholders (the “2014 Proxy Statement”), which will be filed with the Securities and Exchange Commission not later than 120 days after the end of the fiscal year ended December 31, 2014.

Table of Contents

TABLE OF CONTENTS

2

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report contains “forward-looking statements.” Such statements can be identified by the use of forward-looking terminology such as “believes,” “expects,” “may,” “estimates,” “will,” “should,” “plans” or “anticipates” or the negative thereof or other variations thereon or comparable terminology, or by discussions of strategy. Readers are cautioned that any such forward-looking statements are not guarantees of future performance and may involve significant risks and uncertainties, and that actual results may vary materially from those in the forward-looking statements as a result of various factors. Among the factors that significantly impact the metals distribution industry and our business are:

These forward-looking statements involve a number of risks and uncertainties that could cause actual results to differ materially from those suggested by the forward-looking statements. Forward-looking statements should, therefore, be considered in light of various factors, including those set forth in this Annual Report under “Risk Factors” and the caption “Industry and Operating Trends” included in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and elsewhere in this Annual Report. Moreover, we caution you not to place undue reliance on these forward-looking statements, which speak only as of the date they were made. We do not undertake any obligation to publicly release any revisions to these forward-looking statements to reflect events or circumstances after the date of this Annual Report or to reflect the occurrence of unanticipated events.

3

Table of Contents

PART I

Ryerson Holding Corporation (“Ryerson Holding”), a Delaware corporation, is the parent company of Joseph T. Ryerson & Son, Inc. (“JT Ryerson”), a Delaware corporation. On December 17, 2014, Ryerson Inc. (“Ryerson”), formerly a direct, wholly-owned subsidiary of Ryerson Holding, merged with and into JT Ryerson which was previously an indirect, wholly-owned subsidiary of Ryerson Holding, with JT Ryerson as the surviving corporation. As a result of such merger, from and after December 17, 2014, JT Ryerson has been a direct, wholly-owned subsidiary of Ryerson Holding. Affiliates of Platinum Equity, LLC (“Platinum”) own approximately 21,037,500 shares of our common stock, which is approximately 66% of our issued and outstanding common stock. Ryerson Holding conducts materials distribution operations in the United States through JT Ryerson, in Canada through its indirect wholly-owned subsidiary Ryerson Canada, Inc., a Canadian corporation (“Ryerson Canada”) and in Mexico through its indirect wholly-owned subsidiary Ryerson Metals de Mexico, S. de R.L. de C.V., a Mexican corporation (“Ryerson Mexico”). In addition to our North American operations, we conduct materials distribution operations in China through Ryerson China Limited (“Ryerson China”), a company in which we have a 100% ownership percentage, and in Brazil through Açofran Aços e Metais Ltda (“Açofran”), a company in which we have had a 50% direct ownership percentage since February 17, 2012. Unless the context indicates otherwise, Ryerson Holding, JT Ryerson, Ryerson Canada, Ryerson China, Ryerson Mexico and Açofran together with their subsidiaries (including Ryerson prior to its dissolution through merger), are collectively referred to herein as “Ryerson Holding,” “we,” “us,” “our,” or the “Company.”

On July 23, 2014, our Board of Directors approved a 4.25 for 1.00 stock split of the Company’s common stock effective August 5, 2014. Per share and share amounts presented herein have been adjusted for all periods presented to give retroactive effect to 4.25 for 1.00 stock split.

On August 13, 2014, Ryerson Holding completed an initial public offering of 11 million shares of common stock at a price to the public of $11.00 per share. Net proceeds from the offering totaled $112.4 million, after deducting the underwriting discount and offering expenses, and were used to (i) redeem $99.5 million in aggregate principal amount of the 11 ¹⁄₄% Senior Notes due 2018 (the “2018 Notes”), (ii) pay Platinum Equity Advisors LLC (“Platinum Advisors”), and its affiliates $15.0 million of the $25.0 million owed as consideration for terminating the services agreement between JT Ryerson and Platinum Advisors, an affiliate of Platinum (the remaining $10.0 million will be paid in August 2015) and (iii) pay related transaction fees, expenses and premiums in connection with the offering, which were approximately $11.2 million. We borrowed an additional $23.3 million under our amended and restated $1.35 billion revolving credit facility (the “Ryerson Credit Facility”) as part of the funding of these transactions.

Our Company

We believe we are one of the largest processors and distributors of metals in North America measured in terms of sales, with global operations in North America, China and Brazil. Our industry is highly fragmented with the largest companies accounting for only a small percentage of total market share. Our customer base ranges from local, independently owned fabricators and machine shops to large, international original equipment manufacturers. We process and distribute a full line of over 70,000 products in stainless steel, aluminum, carbon steel and alloy steels and a limited line of nickel and red metals in various shapes and forms. More than one-half of the products we sell are processed to meet customer requirements. We use various processing and fabricating techniques to process materials to a specified thickness, length, width, shape and surface quality pursuant to customer orders. For the year ended December 31, 2014, we purchased 2.0 million tons of materials from suppliers throughout the world.

We operate over 90 facilities across North America, six facilities in China and one facility in Brazil. Our service centers are strategically located in close proximity to our customers, which allows us to quickly process and deliver our products and services, often within the next day of receiving an order. We own, lease or contract a fleet of tractors and trailers, allowing us to efficiently meet our customers’ delivery demands. In addition, our scale enables us to maintain low operating costs. Our operating expenses as a percentage of sales for the years ended December 31, 2014 and 2013 were 14.0% and 14.2%, respectively.

In addition to providing a wide range of flat and long metals products, we offer numerous value-added processing and fabrication services such as sawing, slitting, blanking, cutting to length, leveling, flame cutting, laser cutting, edge trimming, edge rolling, roll forming, tube manufacturing, polishing, shearing, forming, stamping, punching, rolling shell plate to radius and beveling to process materials to a specified thickness, length, width, shape and surface quality pursuant to specific customer orders. Our value proposition also includes providing a superior level of customer service and responsiveness, technical services and inventory management solutions. Our breadth of services allows us to create long-term partnerships with our customers and enhances our profitability.

4

Table of Contents

We serve approximately 40,000 customers across a wide range of manufacturing end markets. We believe the diverse end markets we serve reduce the volatility of our business in the aggregate. Our geographic network and broad range of products and services allow us to serve large, international manufacturing companies across multiple locations.

Industry Overview

Metals service centers serve as key intermediaries between metal producers and end users of metal products. Metal producers offer commodity products and typically sell metals in the form of standard-sized coils, sheets, plates, structurals, bars and tubes. Producers prefer large order quantities, longer lead times and limited inventory in order to maximize capacity utilization. End users of metal products seek to purchase metals with customized specifications, including value-added processing. End market customers look for “one-stop” suppliers that can offer processing services along with lower order volumes, shorter lead times, and more reliable delivery. As an intermediary, metals service centers aggregate end-users’ demand, purchase metal in bulk to take advantage of economies of scale and then process and sell metal that meets specific customer requirements. The end-markets for metals service centers are highly diverse and include machinery, manufacturing, construction and transportation.

The metals service center industry is comprised of many companies, the majority of which have limited product lines and inventories, with customers located in a specific geographic area. The industry is highly fragmented, with a large number of small companies and few relatively large companies. In general, competition is based on quality, service, price and geographic proximity.

The metals service center industry typically experiences cash flow trends that are counter-cyclical to the revenue and volume growth of the industry. Companies that participate in the industry have assets that are composed primarily of working capital. During an industry downturn, companies generally reduce working capital investments and generate cash as inventory and accounts receivable balances decline. As a result, operating cash flow and liquidity tend to increase during a downturn, which typically facilitates industry participants’ ability to cover fixed costs and repay outstanding debt.

The industry is divided into three major groups: general line service centers, specialized service centers, and processing centers, each of which targets different market segments. General line service centers handle a broad line of metals products and tend to concentrate on distribution rather than processing. General line service centers range in size from a single location to a nationwide network of locations. For general line service centers, individual order size in terms of dollars and tons tends to be small relative to processing centers, while the total number of orders is typically high. Specialized service centers focus their activities on a narrower range of product and service offerings than do general line companies. Such service centers provide a narrower range of services to their customers and emphasize product expertise and lower operating costs, while maintaining a moderate level of investment in processing equipment. Processing centers typically process large quantities of metals purchased from primary producers for resale to large industrial customers, such as the automotive industry. Because orders are typically large, operation of a processing center requires a significant investment in processing equipment.

We compete with many other general line service centers, specialized service centers and processing centers on a regional and local basis, some of which may have greater financial resources and flexibility than us. We also compete to a lesser extent with primary metal producers. Primary metal producers typically sell to very large customers that require regular shipments of large volumes of steel. Although these large customers sometimes use metals service centers to supply a portion of their metals needs, metals service center customers typically are consumers of smaller volumes of metals than are customers of primary steel producers. Although we purchase from foreign steelmakers, some of our competitors purchase a higher percentage of metals than us from foreign steelmakers. Such competitors may benefit from favorable exchange rates or other economic or regulatory factors that may result in a competitive advantage. This competitive advantage may be offset somewhat by higher transportation costs and less dependable delivery times associated with importing metals into North America.

Competitive Strengths

Leading Market Position in North America

We believe we are one of the largest service center companies for carbon and stainless steel as well as aluminum based on sales in the North American market where we have a broad geographic presence with over 90 locations.

Our service centers are located near our customer locations, enabling us to provide timely delivery to customers across numerous geographic markets. Additionally, our widespread network of locations in the United States, Canada and Mexico

5

Table of Contents

helps us to utilize our expertise to more efficiently serve customers with complex supply chain requirements across multiple manufacturing locations. We believe this is a key differentiator among customers who need a supplier that can reliably and consistently support them. Our ability to transfer inventory among our facilities better enables us to more timely and profitably source and process specialized items at regional locations throughout our network than if we were required to maintain inventory of all products and specialized equipment at each location.

We believe with our significant footprint in the North American market, combined with our significant scale and operating leverage, a cyclical recovery of the service center industry supported by long-term growth trends in our end-markets should allow us to experience higher growth rates relative to North American economic improvement, but there can be no guarantee that we will experience such higher growth rates.

Broad Geographic Reach across Attractive End Markets.

Our operations cover a diverse range of industries, including industrial equipment manufacturing, industrial fabrication, electrical machinery production, transportation equipment manufacturing, heavy equipment manufacturing and oil and gas. We believe the industries we serve will provide demand for our products and services as the North American manufacturing economy continues to grow. We also believe that the continued trend of moving manufacturing to the United States from overseas should benefit us with our broad North American platform. In addition, we expect to benefit from continued growth in international markets that will help spur demand at domestic manufacturing facilities that sell into the global market. We believe that our ability to quickly adjust our offering based on regional and industry specific trends creates stability while also providing the opportunity to access specific growth markets.

Established Platform for Organic and Acquisition Growth.

Since 2011, we have opened eleven new service centers in previously underserved North American regions. We have acquired another eleven facilities to complement our existing locations and expanded the product offering in many locations based on customer demand. Over the last three years, a significant portion of our capital expenditures have been made to expand our long and plate processing capabilities. We believe that our expanded presence in select regions and products positions us well to capture further growth in these regions and products.

Although there can be no guarantee of growth, we believe a number of our other strategies, such as improving our product mix, pricing our products and services based on the value we provide our customers, growing our large national network, and expanding our diverse operating capabilities, will provide us with growth opportunities.

In addition, we have utilized our leadership and experience in the North American markets to establish operations in China, the largest and one of the highest growth metals markets in the world, as well as in Brazil.

Given the highly fragmented nature of the service center industry, we believe there are numerous additional opportunities to acquire businesses and incorporate them into our existing infrastructure. Given our large scale and geographic reach, we believe we can add value to these businesses in a number of ways, including providing greater purchasing power, access to additional end markets and broadening product mix. Although we do not have any current plans to engage in any specific acquisitions, from time to time and in the ordinary course of business, we regularly evaluate potential acquisition opportunities.

Lean Operating Structure Providing Operating Leverage.

Since 2007, we have transformed our operating model by decentralizing our operations and reducing our cost base, improving our operating efficiency while also providing the flexibility for further growth in our target markets. In 2014, warehousing, delivery, selling, general and administrative expenses increased $29.1 million or 6.1% from 2013. Excluding one-time IPO-related expenses of $32.7 million, warehousing, delivery, selling, general and administrative expenses declined 0.7% to $476.5 million as compared to $480.1 million in 2013, despite growing sales by 4.7% over the period.

We have also focused on process improvements in inventory management. Average inventory days excluding LIFO decreased from 84 days in 2013 to 82 days in 2014, our average inventory days have improved on an overall basis from 100 days in 2006. This reduction has decreased our exposure to metals price movements as well as increased capacity in our facilities to devote to higher margin products. These organizational and operating changes have improved our operating structure, working capital management and efficiency.

As a result of our initiatives, we have increased our financial flexibility and believe we have a favorable cost structure compared to many of our peers. This will provide significant operating leverage.

6

Table of Contents

Extensive Breadth of Products and Services for Diverse Customer Base.

We carry a full range of over 70,000 products, including aluminum, carbon, stainless and alloy steels and a limited line of nickel and red metals. In addition, we provide a broad range of processing and fabrication services to meet the needs of our approximately 40,000 customers and typically fulfill more than 1,000,000 orders per year. We also provide supply chain solutions, including just-in-time delivery, and value-added components to many original equipment manufacturers.

We believe our broad product mix and marketing approach provides customers with a “one-stop shop” solution few other service center companies are able to offer.

For the year ended December 31, 2014, no single customer accounted for more than 2% of our sales, and our top 10 customers accounted for less than 11% of our sales.

Strong Relationships with Suppliers.

We are among the largest purchasers of metals in North America and have long-term relationships with many of our North American suppliers. We believe we are frequently one of the largest customers of our suppliers and that concentrating our orders among a core group of suppliers is an effective method for obtaining favorable pricing and service. We believe we have the opportunity to further leverage this strength through continued focus on price and volume using an analytics-driven approach to procurement. In addition, we view our strategic suppliers as supply chain partners. Our coordinated effort focused on logistics, lead times, rolling schedules, and scrap return programs ultimately results in value-based buying that is advantageous for us. Metals producers worldwide are consolidating, and large, geographically diversified customers, such as Ryerson, are desirable partners for these larger suppliers. Our relationships with suppliers often provides us with access to metals when supply is constrained. Through our knowledge of the global metals marketplace and capabilities of specific mills we believe we have developed a global purchasing strategy that allows us to secure favorable prices across our product lines.

Experienced Management Team with Deep Industry Knowledge.

Our senior management team has extensive industry and operational experience and has been instrumental in optimizing and implementing our strategy in the last three years. Our senior management has an average of more than 20 years of experience in the metals or service center industries. The senior executive team’s extensive experience in international markets and outside the service center industry provides perspective to drive profitable growth. Our CEO, Mr. Michael Arnold, joined the Company in January 2011 and has 35 years of diversified industrial experience. Mr. Edward Lehner, who has been our CFO since August 2012, has 24 years of experience, predominantly in the metals industry. Under their leadership, we have increased our focus on positioning the Company for growth and enhanced profitability. As previously disclosed by the Company, Mr. Arnold will be retiring from his positions with the Company and its subsidiaries in 2015. An exact date for Mr. Arnold’s retirement has not yet been determined.

Industry Outlook

We believe that the North American economy has grown since the recession that began in 2008. According to the Institute for Supply Management, the Purchasing Managers’ Index (“PMI”) was 55.1% in December 2014, marking the 25th consecutive month and the 59^th of the last 60 months in the five year period from 2010 to 2014 that the PMI reading was above 50%, which indicates that the manufacturing economy is generally expanding. The PMI measures the economic health of the manufacturing sector and is a composite index based on five indicators: new orders, inventory levels, production, supplier deliveries and the employment environment. PMI readings can be a good indicator of industrial activity and general economic growth.

Furthermore, the overall U.S. economy is expected to continue growing as evidenced by Federal Reserve’s midrange forecasted GDP growth rates of 2.8%, 2.7%, and 2.4% for 2015, 2016, and 2017, respectively.

Steel demand in North America is largely dependent on growth of the automotive, industrial equipment, consumer appliance and construction end markets. One of our key end markets is within the industrial equipment sector and according to the latest Livingston Survey, published by the Federal Reserve Bank of Philadelphia, U.S. industrial production grew by 4.0% in 2014 and is expected to grow by 3.7% in 2015 and 3.4% in 2016.

China continues to be a key driver in the growth of global metals demand. According to the International Monetary Fund, China’s GDP grew 7.4% in 2014 and is projected to grow 6.8% in 2015 and 6.3% in 2016.

7

Table of Contents

Products and Services

We carry a full line of carbon steel, stainless steel, alloy steels and aluminum, and a limited line of nickel and red metals. These materials are inventoried in a number of shapes, including coils, sheets, rounds, hexagons, square and flat bars, plates, structurals and tubing.

The following table shows our percentage of sales by major product lines for 2014, 2013 and 2012:

More than one-half of the materials sold by us are processed. We use processing and fabricating techniques such as sawing, slitting, blanking, cutting to length, leveling, flame cutting, laser cutting, edge trimming, edge rolling, polishing and shearing to process materials to specified thickness, length, width, shape and surface quality pursuant to specific customer orders. Among the most common processing techniques used by us are slitting, which involves cutting coiled metals to specified widths along the length of the coil, and leveling, which involves flattening metals and cutting them to exact lengths. We also use third-party fabricators to outsource certain processes that we are not able to perform internally (such as pickling, painting, forming and drilling) to enhance our value-added services.

The plate burning and fabrication processes are particularly important to us. These processes require sophisticated and expensive processing equipment. As a result, rather than making investments in such equipment, manufacturers have increasingly outsourced these processes to metals service centers.

As part of securing customer orders, we also provide services to our customers to assure cost effective material application while maintaining or improving the customers’ product quality.

Our services include: just-in-time inventory programs, production of kits containing multiple products for ease of assembly by the customer, consignment arrangements and the placement of our employees at a customer’s site for inventory management and production and technical assistance. We also provide special stocking programs in which products that would not otherwise be stocked by us are held in inventory to meet certain customers’ needs. These services are designed to reduce customers’ costs by minimizing their investment in inventory and improving their production efficiency.

8

Table of Contents

Customers

Our customer base is diverse, numbering approximately 40,000 and includes most metal-consuming industries, most of which are cyclical. For the year ended December 31, 2014, no single customer accounted for more than 2% of our sales, and the top 10 customers accounted for less than 11% of our sales. Substantially all of our sales are attributable to our U.S. operations and substantially all of our long-lived assets are located in the United States. The following table shows the Company’s percentage of sales by class of customers for 2014, 2013 and 2012:

Some of our largest customers have procurement programs with us, typically ranging from three months to one year in duration. Pricing for these contracts is generally based on a pricing formula rather than a fixed price for the program duration. However, certain customer contracts are at fixed prices; in order to minimize our financial exposure, we generally match these fixed-price sales programs with fixed-price supply programs. In general, sales to customers are priced at the time of sale based on prevailing market prices.

Suppliers

For the year ended December 31, 2014, our top 25 suppliers accounted for approximately 75% of our purchase dollars.

We purchase the majority of our inventories at prevailing market prices from key suppliers with which we have established relationships to obtain improvements in price, quality, delivery and service. We are generally able to meet our materials requirements because we use many suppliers, because there is a substantial overlap of product offerings from these suppliers, and because there are a number of other suppliers able to provide identical or similar products. Because of the competitive nature of the business, when metal prices increase due to product demand, mill surcharges, supplier consolidation or other factors that in turn lead to supply constraints or longer mill lead times, we may not be able to pass our increased material costs fully to customers. In recent years, there have been significant consolidations among suppliers of carbon steel, stainless steel, and aluminum. Continued consolidation among suppliers could lead to disruptions in our ability to meet our material requirements as the sources of our products become more concentrated from fewer producers. We believe we will be able to meet our material requirements because we believe that we have good relationships with our suppliers and believe we will continue to be among the largest customers of our suppliers.

Sales and Marketing

We maintain our own sales force. In addition to our office sales staff, we market and sell our products through the use of our field sales force that we believe has extensive product and customer knowledge and through a comprehensive catalog of our products. Our office and field sales staffs, which together consist of approximately 650 employees, include technical and metallurgical personnel.

A portion of our customers experience seasonal slowdowns. Our sales in the months of July, November and December traditionally have been lower than in other months because of a reduced number of shipping days and holiday or vacation closures for some customers. Consequently, our sales in the first two quarters of the year are usually higher than in the third and fourth quarters.

9

Table of Contents

Capital Expenditures

In recent years we have made capital expenditures to maintain, improve and expand processing capabilities. Additions by us to property, plant and equipment, together with retirements for the five years ended December 31, 2014, excluding the initial purchase price of acquisitions and the initial effect of fully consolidating a joint venture, are set forth below. The net capital change during such period aggregated to an increase of $98.4 million.

We currently anticipate capital expenditures, excluding acquisitions, of up to approximately $30 million for 2015. We expect capital expenditures will be funded from cash generated by operations and available borrowings.

Employees

As of December 31, 2014, we employed approximately 3,200 persons in North America, 400 persons in China, and 50 persons in Brazil. Our North American workforce was comprised of approximately 1,500 office employees and approximately 1,700 plant employees. Twenty-six percent of our plant employees were members of various unions, including the United Steel Workers and the International Brotherhood of Teamsters. Our relationship with the various unions has generally been good.

Eight renewal contracts covering approximately 170 employees were successfully negotiated in 2014. We also successfully negotiated a first contract for a recently organized facility in Montreal, Quebec in 2014. Eight contracts covering approximately 200 employees are currently scheduled to expire in 2015.

Environmental, Health and Safety Matters

Our facilities and operations are subject to many foreign, federal, state and local laws and regulations relating to the protection of the environment and to health and safety. In particular, our operations are subject to extensive requirements relating to waste disposal, recycling, air and water emissions, the handling of regulated materials, remediation, underground storage tanks, asbestos-containing building materials, workplace exposure and other matters. We believe that our operations are currently in substantial compliance with all such laws and do not presently anticipate substantial expenditures in the foreseeable future in order to meet environmental, workplace health or safety requirements or to pay for any investigations, corrective action or claims. Claims, enforcement actions, or investigations regarding personal injury, property damage, or violation of environmental laws could result in substantial costs to us, divert our management’s attention and result in significant liabilities, fines, or the suspension or interruption of our facilities.

We continue to analyze and implement safeguards to mitigate any environmental, health and safety risks we may face. As a result, additional costs and liabilities may be incurred to comply with future requirements or to address newly discovered conditions, which costs and liabilities could have a material adverse effect on the results of operations, financial condition or cash flows. For example, there is increasing likelihood that additional regulation of greenhouse gas emissions will occur at the foreign, federal, state and local level, which could affect us, our suppliers, and our customers. While the costs of compliance could be significant, given the uncertain outcome and timing of future action by the U.S. federal government and states on this issue, we cannot accurately predict the financial impact of future greenhouse gas regulations on our operations or our customers at this time. We do not currently anticipate any new programs disproportionately impacting us compared to our competitors.

Some of the properties currently or previously owned or leased by us are located in industrial areas or have a long history of heavy industrial use. We may incur environmental liabilities with respect to these properties in the future including cost of investigations, corrective action, claims for natural resource damages, claims by third parties relating to property damages or claims relating to contamination at sites where we have sent waste for treatment or disposal. Based on currently available information we do not expect any investigation or remediation matters or claims related to properties presently or formerly owned or operated or to which we have sent waste for treatment or disposal would have a material adverse effect on our financial condition, results of operations or cash flows.

10

Table of Contents

In October 2011, the United States Environmental Protection Agency named us as one of more than 100 businesses that may be a potentially responsible party for the Portland Harbor Superfund Site. We do not currently have sufficient information available to us to determine the total cost of any required investigation or remediation of the Portland Harbor site and therefore, management cannot predict the ultimate outcome of this matter or estimate a range of potential loss at this time.

Capital and operating expenses for pollution control projects were less than $500,000 per year for the past five years. Excluding any potential additional remediation costs resulting from any corrective action for the properties described above, we expect spending for pollution control projects to remain at historical levels.

Our United States operations are also subject to the Department of Transportation Federal Motor Carrier Safety Regulations. We operate a private trucking motor fleet for making deliveries to some of our customers. Our drivers do not carry any material quantities of hazardous materials. Our foreign operations are subject to similar regulations. Future regulations could increase maintenance, replacement, and fuel costs for our fleet. These costs could have a material adverse effect on our results of operations, financial condition or cash flows.

Intellectual Property

We own several U.S. and foreign trademarks, service marks and copyrights. Certain of the trademarks are registered with the U.S. Patent and Trademark Office and, in certain circumstances, with the trademark offices of various foreign countries. We consider certain other information owned by us to be trade secrets. We protect our trade secrets by, among other things, entering into confidentiality agreements with our employees regarding such matters and implementing measures to restrict access to sensitive data and computer software source code on a need-to-know basis. We believe that these safeguards adequately protect our proprietary rights and vigorously defend these rights. While we consider all of our intellectual property rights as a whole to be important, we do not consider any single right to be essential to our operations as a whole. The $600 million outstanding under the 9% Senior Secured Notes due 2017 (the “2017 Notes”) is secured by our intellectual property.

Foreign Operations

Our foreign operations as a percentage of total sales for the years ended December 31, 2014, 2013 and 2012 were as follows:

Our foreign assets as a percentage of consolidated assets at December 31, 2014, 2013, and 2012 were as follows:

Ryerson Canada

Ryerson Canada, an indirect wholly-owned Canadian subsidiary of Ryerson, is a metals service center and processor. Ryerson Canada has facilities in Calgary (AB), Edmonton (AB), Richmond (BC), Winnipeg (MB), Saint John (NB), Brampton (ON), Toronto (ON) (includes Canadian headquarters), Vaudreuil (QC) and Saskatoon (SK), Canada.

11

Table of Contents

Ryerson China

In 2006, Ryerson Inc., formerly the direct subsidiary of Ryerson Holding, and VSC and its subsidiary, CAMP BVI, formed Ryerson China to enable us, through this foreign operation, to provide metals distribution services in China. We invested $28.3 million in Ryerson China for a 40% equity interest. We increased ownership of Ryerson China from 40% to 80% in the fourth quarter of 2008 for a total purchase cost of $18.5 million. We consolidated the operations of Ryerson China as of October 31, 2008. On July 12, 2010, we acquired VSC’s remaining 20% equity interest in Ryerson China for $17.5 million. As a result, Ryerson China is now an indirect wholly owned subsidiary of Ryerson Holding. Ryerson China is based in Kunshan and operates six processing and service centers in Guangzhou, Dongguan, Kunshan and Tianjin.

Ryerson Mexico

Ryerson Mexico, an indirect wholly owned subsidiary of Ryerson, operates as a metals service center and processor. Ryerson formed Ryerson Mexico in 2010 to expand operations into the Mexican market. Ryerson Mexico has service centers in Monterrey, Tijuana, and Hermosillo.

Brazil

In February 2012, we acquired 50% of the issued and outstanding capital stock of Açofran. As of such date, we, through Açofran, lease one service center in São Paulo, Brazil.

Available Information

All periodic and current reports and other filings that we are required to file with the Securities and Exchange Commission (“SEC”), including our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant Section 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge from the SEC’s website (http://www.sec.gov) or public reference room at 100 F Street N.E., Washington, D.C. 20549 (1-800-SEC-0330) or through our website at http://www.ryerson.com. Such documents are available as soon as reasonably practicable after electronic filing of the material with the SEC. Copies of these reports (excluding exhibits) may also be obtained free of charge, upon written request to: Investor Relations, Ryerson Holding Corporation, 227 W. Monroe, 27th Floor, Chicago, Illinois 60606.

The Company also posts its Code of Ethics on the website. See “Directors, Executive Officers and Corporate Governance—Code of Ethics” for more information regarding our Code of Ethics.

Our website address is included in this report for information purposes only. Our website and the information contained therein or connected thereto are not incorporated into this annual report on Form 10-K.

Our business faces many risks. You should carefully consider the risks and uncertainties described below, together with the other information in this report, including the consolidated financial statements and notes to consolidated financial statements. We cannot assure you that any of the events discussed in the risk factors below will not occur. These risks could have a material and adverse impact on our business, results of operations, financial condition and cash flows.

We service industries that are highly cyclical, and any downturn in our customers’ industries could reduce our sales and profitability. The economic downturn has reduced demand for our products and may continue to reduce demand until an economic recovery.

Many of our products are sold to industries that experience significant fluctuations in demand based on economic conditions, energy prices, seasonality, consumer demand and other factors beyond our control. These industries include manufacturing, electrical production and transportation. We do not expect the cyclical nature of our industry to change.

12

Table of Contents

The U.S. economy entered an economic recession in December 2007, which spread to many global markets in 2008 and 2009 and affected Ryerson and other metals service centers. Beginning in late 2008 and continuing through 2014, the metals industry, including Ryerson and other service centers, felt additional effects of the global economic crisis and recovery thereto and the impact of the credit market disruption. These events contributed to a rapid decline in both demand for our products and pricing levels for those products. The Company has implemented a number of actions to conserve cash, reduce costs and strengthen its competitiveness, including curtailing non-critical capital expenditures, initiating headcount reductions and reductions of certain employee benefits, among other actions. However, there can be no assurance that these actions, or any others that the Company may take in response to further deterioration in economic and financial conditions, will be sufficient.

The volatility of the market could result in a material impairment of goodwill.

We evaluate goodwill annually on October 1 and whenever events or changes in circumstances indicate potential impairment. Events or changes in circumstances that could trigger an impairment review include significant underperformance relative to our historical or projected future operating results, significant changes in the manner or the use of our assets or the strategy for our overall business, and significant negative industry or economic trends. We test for impairment of goodwill by calculating the fair value of a reporting unit using an average of an income approach based on discounted future cash flows and a market approach at the date of valuation. Under the discounted cash flow method, the fair value of each reporting unit is estimated based on expected future economic benefits discounted to a present value at a rate of return commensurate with the risk associated with the investment. Projected cash flows are discounted to present value using an estimated weighted average cost of capital, which considers both returns to equity and debt investors. Significant changes in any one of the assumptions made as part of our analysis, which could occur as a result of actual events, or further declines in the market conditions for our products, could significantly impact our impairment analysis. An impairment charge, if incurred, could be material.

A substantial decline in the value of our available-for-sale security may result in an “other than temporary” impairment charge.

Our investment in one available-for-sale security has unrealized losses of $6.2 million as of December 31, 2014. We may be required to record future impairment charges on our investment if it suffers further declines in value that are considered other-than-temporary, and such other-than-temporary impairment charges would adversely affect our earnings. Considerations used to determine other-than-temporary impairment status to investment securities available-for-sale include, but are not limited to, an increase in the severity of the unrealized loss on a particular security, an increase in the length of time unrealized losses continue without an improvement in value, a change in our intent or ability to hold the security for a period of time sufficient to allow for the forecasted recovery, or changes in market conditions or industry or issuer specific factors that would render us unable to forecast a full recovery in value.

The metals distribution business is very competitive and increased competition could reduce our revenues and gross margins.

The principal markets that we serve are highly competitive. The metals distribution industry is fragmented and competitive, consisting of a large number of small companies and a few relatively large companies. Competition is based principally on price, service, quality, production capabilities, inventory availability and timely delivery. Competition in the various markets in which we participate comes from companies of various sizes, some of which have greater financial resources than we have and some of which have more established brand names in the local markets served by us. Increased competition could reduce our market share, force us to lower our prices or to offer increased services at a higher cost, which could reduce our profitability.

The economic downturn has reduced metals prices. Though prices have risen since the onset of the economic downturn, we cannot assure you that prices will continue to rise. Changing metals prices may have a significant impact on our liquidity, net sales, gross margins, operating income and net income.

The metals industry as a whole is cyclical and, at times, pricing and availability of metal can be volatile due to numerous factors beyond our control, including general domestic and international economic conditions, labor costs, sales levels, competition, levels of inventory held by other metals service centers, consolidation of metals producers, higher raw material costs for the producers of metals, import duties and tariffs and currency exchange rates. This volatility can significantly affect the availability and cost of materials for us.

We, like many other metals service centers, maintain substantial inventories of metal to accommodate the short lead times and just-in-time delivery requirements of our customers. Accordingly, we purchase metals in an effort to maintain our inventory at levels that we believe to be appropriate to satisfy the anticipated needs of our customers based upon historic buying practices, contracts with customers and market conditions. When metals prices decline, as they did in 2008 and 2009, customer demands for lower prices and our competitors’ responses to those demands could result in lower sale prices and, consequently, lower margins as we use existing metals inventory. Notwithstanding recent price increases, metals prices may decline, and declines in those prices or further reductions in sales volumes could adversely impact our ability to maintain our liquidity and to remain in compliance with certain financial covenants under our $1.35 billion revolving credit facility agreement (as amended and restated, the “Ryerson Credit Facility”), as well as result in us incurring inventory or goodwill impairment charges. Changing metals prices therefore could significantly impact our liquidity, net sales, gross margins, operating income and net income.

13

Table of Contents

We have a substantial amount of indebtedness, which could adversely affect our financial position and prevent us from fulfilling our financial obligations.

We currently have a substantial amount of indebtedness. As of December 31, 2014, our total indebtedness was approximately $1,259.1 million and we had approximately $245 million of unused capacity under the Ryerson Credit Facility. Our substantial indebtedness may:

We may also incur additional indebtedness in the future. The terms of the Ryerson Credit Facility and the indentures governing our outstanding notes restrict but do not prohibit us from doing so, and the indebtedness incurred in compliance with these restrictions could be substantial. If new indebtedness is added to our current debt levels, the related risks that we now face could intensify.

The covenants in the Ryerson Credit Facility and the indentures governing our notes impose, and covenants contained in agreements governing indebtedness that we incur in the future may impose, restrictions that may limit our operating and financial flexibility.

The Ryerson Credit Facility and the indentures governing our outstanding notes contain a number of significant restrictions and covenants that limit our ability and the ability of our restricted subsidiaries, including JT Ryerson, to:

The terms of the Ryerson Credit Facility require that, in the event availability under the facility declines to a certain level, we maintain a minimum fixed charge coverage ratio at the end of each fiscal quarter. Total credit availability is limited by the amount of eligible accounts receivable and inventory pledged as collateral under the agreement insofar as the Company is subject to a borrowing base comprised of the aggregate of these two amounts, less applicable reserves. As of December 31, 2014, total credit availability was $245 million based upon eligible accounts receivable and inventory pledged as collateral.

Additionally, subject to certain exceptions, the indentures governing the outstanding notes restrict JT Ryerson’s ability to pay us dividends to the extent of 50% of future net income, once prior losses are offset. Future net income is defined in the indenture governing the notes as net income adjusted for, among other things, the inclusion of dividends from joint ventures actually received in cash by JT Ryerson, and the exclusion of: (i) all extraordinary gains or losses; (ii) a certain portion of net income allocable to minority interest in unconsolidated persons or investments in unrestricted subsidiaries; (iii) gains or losses in respect of any asset sale on an after tax basis; (iv) the net income from any disposed or discontinued operations or any net gains or losses on disposed or discontinued operations, on an after-tax basis; (v) any gain or loss realized as a result of the cumulative effect of a change in accounting principles; (vi) any fees and expenses paid in connection with the issuance of the notes; (vii) non-cash compensation expense incurred with any issuance of equity interest to an employee; and (viii) any net after-tax gains or losses attributable to the early extinguishment of debt. Our future indebtedness may contain covenants more

14

Table of Contents

restrictive in certain respects than the restrictions contained in the Ryerson Credit Facility and the indentures governing the notes. Operating results below current levels or other adverse factors, including a significant increase in interest rates, could result in our being unable to comply with financial covenants that are contained in the Ryerson Credit Facility or that may be contained in any future indebtedness. In addition, complying with these covenants may also cause us to take actions that are not favorable to holders of our notes and may make it more difficult for us to successfully execute our business strategy and compete against companies that are not subject to such restrictions.

We may not be able to generate sufficient cash to service all of our indebtedness.

Our ability to make payments on our indebtedness depends on our ability to generate cash in the future. Our outstanding notes, the Ryerson Credit Facility and our other outstanding indebtedness are expected to account for significant cash interest expenses. Accordingly, we will have to generate significant cash flows from operations to meet our debt service requirements. If we do not generate sufficient cash flow to meet our debt service and working capital requirements, we may be required to sell assets, seek additional capital, reduce capital expenditures, restructure or refinance all or a portion of our existing indebtedness, or seek additional financing. Moreover, insufficient cash flow may make it more difficult for us to obtain financing on terms that are acceptable to us, or at all.

Because a portion of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.

A portion of our indebtedness, including the Ryerson Credit Facility, bears interest at rates that fluctuate with changes in certain short-term prevailing interest rates. As of December 31, 2014, we had approximately $435.0 million of outstanding borrowings under the Ryerson Credit Facility, with an additional $245 million available for borrowing under such facility. Assuming a consistent level of debt, a 100 basis point change in the interest rate on our floating rate debt effective from the beginning of the year would increase or decrease our interest expense under the Ryerson Credit Facility by approximately $3.7 million on an annual basis. If interest rates increase dramatically, we could be unable to service our debt which could have a material adverse effect on our business, financial condition, results of operations or cash flows.

We may not be able to successfully consummate and complete the integration of future acquisitions, and if we are unable to do so, we may be unable to increase our growth rates.

We have grown through a combination of internal expansion, acquisitions and joint ventures. We intend to continue to grow through selective acquisitions, but we may not be able to identify appropriate acquisition candidates, obtain financing on satisfactory terms, consummate acquisitions or integrate acquired businesses effectively and profitably into our existing operations. Restrictions contained in the agreements governing our notes, the Ryerson Credit Facility or our other existing or future debt may also inhibit our ability to make certain investments, including acquisitions and participations in joint ventures.

Our future success will depend on our ability to complete the integration of these future acquisitions successfully into our operations. After any acquisition, customers may choose to diversify their supply chains to reduce reliance on a single supplier for a portion of their metals needs. We may not be able to retain all of our and an acquisition’s customers, which may adversely affect our business and sales. Integrating acquisitions, particularly large acquisitions, requires us to enhance our operational and financial systems and employ additional qualified personnel, management and financial resources, and may adversely affect our business by diverting management away from day-to-day operations. Further, failure to successfully integrate acquisitions may adversely affect our profitability by creating significant operating inefficiencies that could increase our operating expenses as a percentage of sales and reduce our operating income. In addition, we may not realize expected cost savings from acquisitions, which may also adversely affect our profitability.

We may not be able to retain or expand our customer base if the North American manufacturing industry continues to erode through moving offshore or through acquisition and merger or consolidation activity in our customers’ industries.

Our customer base primarily includes manufacturing and industrial firms. Some of our customers operate in industries that are undergoing consolidation through acquisition and merger activity; some are considering or have considered relocating production operations overseas or outsourcing particular functions overseas; and some customers have closed as they were unable to compete successfully with overseas competitors. Our facilities are predominately located in the United States and Canada. To the extent that our customers cease U.S. operations, relocate or move operations overseas to regions in which we do not have a presence, we could lose their business. Acquirers of manufacturing and industrial firms may have suppliers of choice that do not include us, which could impact our customer base and market share.

15

Table of Contents

Certain of our operations are located outside of the United States, which subjects us to risks associated with international activities.

Certain of our operations are located outside of the United States, primarily in Canada, China, Mexico and Brazil. We are subject to the Foreign Corrupt Practices Act (“FCPA”), which generally prohibits U.S. companies and their intermediaries from making corrupt payments or otherwise corruptly giving any other thing of value to foreign officials for the purpose of obtaining or keeping business or otherwise obtaining favorable treatment, and requires companies to maintain adequate record-keeping and internal accounting practices. The FCPA applies to covered companies, individual directors, officers, employees and agents. Under the FCPA, U.S. companies may be held liable for some actions taken by strategic or local partners or representatives. If we or our intermediaries fail to comply with the requirements of the FCPA, governmental authorities in the United States could seek to impose civil and/or criminal penalties.

The Chinese government exerts substantial influence over the manner in which we must conduct our business activities, particularly with regards to the land our facilities are located on.

The Chinese government has exercised and continues to exercise substantial control over the Chinese economy through regulation and state ownership. Our ability to operate in China may be harmed by changes in its laws and regulations, including those relating to taxation, import and export tariffs, environmental regulations, land use rights, property and other matters. We believe that our operations in China are in material compliance with all applicable legal and regulatory requirements. However, the central or local governments of the jurisdictions in which we operate may impose new, stricter regulations or interpretations of existing regulations that would require additional expenditures and efforts on our part to ensure our compliance with such regulations or interpretations. Moreover, the Chinese court system does not provide the same property and contract right guarantees as do courts in the United States and, accordingly, disputes may be protracted and resolution of claims may result in significant economic loss.

Additionally, although in recent years the Chinese government has implemented measures emphasizing the utilization of market forces for economic reform, there is no private ownership of land in China and all land ownership is held by the government of China, its agencies, and collectives, which issue land use rights that are generally renewable. We lease the land where our Chinese facilities are located from the Chinese government. Although we believe our relationship with the Chinese government is sound, if the Chinese government decided to terminate our land use rights agreements, our assets could become impaired and our ability to meet customer orders could be impacted.

Our revenue and operating results may fluctuate, which could result in a decline in our profitability and make it more difficult for us to grow our business.

Our revenue and operating results have historically varied from quarter to quarter. Periods of decline could result in an overall decline in profitability and make it more difficult for us to make payments on our indebtedness and grow our business. We expect our quarterly results to continue to fluctuate in the future due to a number of factors, including:

Damage to our information technology infrastructure could harm our business.

The unavailability of any of our computer-based systems for any significant period of time could have a material adverse effect on our operations. In particular, our ability to manage inventory levels successfully largely depends on the efficient operation of our computer hardware and software systems. We use management information systems to track inventory information at individual facilities, communicate customer information and aggregate daily sales, margin and promotional information. Difficulties associated with upgrades, installations of major software or hardware, and integration with new systems could have a material adverse effect on results of operations. We will be required to expend substantial resources to integrate our information systems with the systems of companies we have acquired. The integration of these systems may disrupt our business or lead to operating inefficiencies. In addition, these systems are vulnerable to, among other things, damage or interruption from fire, flood, tornado and other natural disasters, power loss, computer system and network failures, operator negligence, physical and electronic loss of data, or security breaches and computer viruses.

Any significant work stoppages can harm our business.

As of December 31, 2014, we employed approximately 3,200 persons in North America, 400 persons in China, and 50 persons in Brazil. Our North American workforce was comprised of approximately 1,500 office employees and approximately 1,700 plant employees. Twenty-six percent of our plant employees were members of various unions, including the United Steel Workers and the International Brotherhood of Teamsters. Our relationship with the various unions has generally been good.

16

Table of Contents

Eight renewal contracts covering approximately 170 employees were successfully negotiated in 2014. We also successfully negotiated a first contract for a recently organized facility in Montreal, Quebec in 2014. Eight contracts covering approximately 200 employees are currently scheduled to expire in 2015.

Certain employee retirement benefit plans are underfunded and the actual cost of those benefits could exceed current estimates, which would require us to fund the shortfall.

As of December 31, 2014, our pension plan had an unfunded liability of $277 million. Our actual costs for benefits required to be paid may exceed those projected and future actuarial assessments to the extent that those costs exceed the current assessment. Under those circumstances, the adjustments required to be made to our recorded liability for these benefits could have a material adverse effect on our results of operations and financial condition and cash payments to fund these plans could have a material adverse effect on our cash flows. We may be required to make substantial future contributions to improve the plan’s funded status.

Future funding for postretirement employee benefits other than pensions also may require substantial payments from current cash flow.

We provide postretirement life insurance and medical benefits to eligible retired employees. Our unfunded postretirement benefit obligation as of December 31, 2014 was $101 million. Our actual costs for benefits required to be paid may exceed those projected and future actuarial assessments to the extent that those costs exceed the current assessment. Under those circumstances, adjustments will be required to be made to our recorded liability for these benefits.

Any prolonged disruption of our processing centers could harm our business.

We have dedicated processing centers that permit us to produce standardized products in large volumes while maintaining low operating costs. We may suffer prolonged disruption in the operations of any of these facilities, whether due to labor or technical difficulties, destruction or damage to any of the facilities or otherwise.

If we are unable to retain and attract management and key personnel, it may adversely affect our business.

We believe that our success is due, in part, to our experienced management team. Losing the services of one or more members of our management team such as our CEO, Michael C. Arnold, who has announced that he will retire from the Company in 2015, could adversely affect our business and possibly prevent us from improving our operational, financial and information management systems and controls. In the future, we may need to retain and hire additional qualified sales, marketing, administrative, operating and technical personnel, and to train and manage new personnel. Our ability to implement our business plan is dependent on our ability to retain and hire a large number of qualified employees each year.

Our existing international operations and potential joint ventures may cause us to incur costs and risks that may distract management from effectively operating our North American business, and such operations or joint ventures may not be profitable.

We maintain foreign operations in Canada, China, Mexico and Brazil. International operations are subject to certain risks inherent in conducting business in, and with, foreign countries, including price controls, exchange controls, export controls, economic sanctions, duties, tariffs, limitations on participation in local enterprises, nationalization, expropriation and other governmental action, and changes in currency exchange rates. While we believe that our current arrangements with local partners provide us with experienced business partners in foreign countries, events or issues, including disagreements with our partners, may occur that require attention of our senior executives and may result in expenses or losses that erode the profitability of our foreign operations or cause our capital investments abroad to be unprofitable.

Lead time and the cost of our products could increase if we were to lose one of our primary suppliers.

If, for any reason, our primary suppliers of aluminum, carbon steel, stainless steel or other metals should curtail or discontinue their delivery of such metals in the quantities needed and at prices that are competitive, our business could suffer. The number of available suppliers could be reduced by factors such as industry consolidation and bankruptcies affecting steel and metal producers. For the year ended December 31, 2014, our top 25 suppliers represented approximately 75% of our purchases. We could be significantly and adversely affected if delivery were disrupted from a major supplier. If, in the future, we were unable to obtain sufficient amounts of the necessary metals at competitive prices and on a timely basis from our traditional suppliers, we may not be able to obtain such metals from alternative sources at competitive prices to meet our delivery schedules, which could have a material adverse effect on our sales and profitability.

17

Table of Contents

We could incur substantial costs related to environmental, health and safety laws.

Our operations are subject to increasingly stringent environmental, health and safety laws. These include laws that impose limitations on the discharge of pollutants into the air and water and establish standards for the treatment, storage and disposal of regulated materials and the investigation and remediation of contaminated soil, surface water and groundwater. Failure to maintain or achieve compliance with these laws or with the permits required for our operations could result in substantial increases in operating costs and capital expenditures. In addition, we may be subject to fines and civil or criminal sanctions, third party claims for property damage or personal injury, worker’s compensation or personal injury claims, cleanup costs or temporary or permanent discontinuance of operations. Certain of our facilities are located in industrial areas, have a history of heavy industrial use and have been in operation for many years and, over time, we and other predecessor operators of these facilities have generated, used, handled and disposed of hazardous and other regulated wastes. Environmental liabilities could exist, including cleanup obligations at these facilities or at off-site locations where materials from our operations were disposed of, which could result in future expenditures that cannot be currently quantified and which could have a material adverse effect on our financial position, results of operations or cash flows. Such liabilities may be imposed without regard to fault or the legality of a party’s conduct and may, in certain circumstances, be joint and several. Future changes to environmental, health and safety laws, including those related to climate change, could result in material liabilities and costs, constrain operations or make such operations more costly for us, our suppliers and our customers. In October 2011, the United States Environmental Protection Agency named us as one of more than 100 businesses that may be a potentially responsible party for the Portland Harbor Superfund Site. We do not currently have sufficient information available to us to determine the total cost of any required investigation or remediation of the Portland Harbor site and therefore, management cannot predict the ultimate outcome of this matter or estimate a range of potential loss at this time.

Regulations related to conflict-free minerals may force us to incur additional expenses and place us at a competitive disadvantage.

On August 22, 2012, under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (the “Dodd-Frank Act”), the United States Securities and Exchange Commission (“SEC”) adopted new requirements for reporting companies that use certain minerals and metals, known as “conflict minerals”, in their products, whether or not these products are manufactured by third parties. These requirements require companies to diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo and adjoining countries. Since our supply chain is complex, we may not be able to conclusively verify the origins for all metals used in our products and we may face reputational challenges with our customers. Additionally, as there may be only a limited number of suppliers offering “conflict free” metals, we cannot be sure that we will be able to obtain necessary metals from such suppliers in sufficient quantities or at competitive prices. Accordingly, we could incur significant cost related to the compliance process, including potential difficulty or added costs in satisfying the disclosure requirements. Moreover, we may encounter challenges to satisfy those customers who require that all of the components of our products be certified as conflict free which could place us at a competitive disadvantage if we are unable to do so.

We are subject to litigation that could strain our resources and distract management.

From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. These suits concern issues including product liability, contract disputes, employee-related matters and personal injury matters. It is not feasible to predict the outcome of all pending suits and claims, and the ultimate resolution of these matters as well as future lawsuits could have a material adverse effect on our business, financial condition, results of operations or cash flows or reputation.

We may face product liability claims that are costly and create adverse publicity.

If any of the products that we sell cause harm to any of our customers, we could be exposed to product liability lawsuits. If we were found liable under product liability claims, we could be required to pay substantial monetary damages. Further, even if we successfully defended ourself against this type of claim, we could be forced to spend a substantial amount of money in litigation expenses, our management could be required to spend valuable time in the defense against these claims and our reputation could suffer.

18

Table of Contents

Our risk management strategies may result in losses.

From time to time, we may use fixed-price and/or fixed-volume supplier contracts to offset contracts with customers. Additionally, we may use foreign exchange contracts and interest rate swaps to hedge Canadian dollar and floating rate debt exposures. These risk management strategies pose certain risks, including the risk that losses on a hedge position may exceed the amount invested in such instruments. Moreover, a party in a hedging transaction may be unavailable or unwilling to settle our obligations, which could cause us to suffer corresponding losses. A hedging instrument may not be effective in eliminating all of the risks inherent in any particular position. Our profitability may be adversely affected during any period as a result of use of such instruments.

We may be adversely affected by currency fluctuations in the U.S. dollar versus the Canadian dollar and the Chinese renminbi.

We have significant operations in Canada which incur the majority of their metal supply costs in U.S. dollars but earn the majority of their sales in Canadian dollars. Additionally, we have significant assets in China. We may from time to time experience losses when the value of the U.S. dollar strengthens against the Canadian dollar or the Chinese renminbi, which could have a material adverse effect on our results of operations. In addition, we will be subject to translation risk when we consolidate our Canadian and Chinese subsidiaries’ net assets into our balance sheet. Fluctuations in the value of the U.S. dollar versus the Canadian dollar or Chinese renminbi could reduce the value of these assets as reported in our financial statements, which could, as a result, reduce our stockholders’ equity.

Not applicable.

As of December 31, 2014, the Company’s facilities are set forth below:

Operations in the United States

JT Ryerson maintains 84 operational facilities, including 6 locations that are dedicated to administration services. All of our metals service center facilities are in good condition and are adequate for JT Ryerson’s existing operations. Approximately 48% of these facilities are leased. The lease terms expire at various times through 2025. Owned properties noted as vacated below have been closed and are in the process of being sold. JT Ryerson’s properties and facilities are adequate to serve its present and anticipated needs.

19

Table of Contents

20

Table of Contents

Operations in Canada

Ryerson Canada, a wholly-owned indirect Canadian subsidiary of Ryerson, has 10 operational facilities in Canada. All of the metals service center facilities are in good condition and are adequate for Ryerson Canada’s existing and anticipated operations. Three facilities are leased. The lease terms expire at various times through 2025.

Operations in China

Ryerson China, an indirect wholly owned subsidiary of Ryerson, has six service and processing centers in China, at Guangzhou, Dongguan, Kunshan and Tianjin, performing coil processing, sheet metal fabrication and plate processing. Ryerson China’s headquarters office building is located in Kunshan. We own three buildings in China and have purchased the related land use rights. The remainder of our facilities are leased. All of the facilities are in good condition and are adequate for Ryerson China’s existing and anticipated operations.

Operations in Mexico

Ryerson Mexico, an indirect wholly owned subsidiary of Ryerson, has three facilities in Mexico. We have service centers in Monterrey, Tijuana, and Hermosillo, all of which are leased. The facilities are in good condition and are adequate for Ryerson Mexico’s existing and anticipated operations.

Operations in Brazil

On February 17, 2012, we acquired 50% of the issued and outstanding capital stock of Açofran. We, through Açofran, lease one service center in São Paulo, Brazil. The facility is in good condition and is adequate for its existing and anticipated operations.

Information concerning our legal proceedings is set forth in Note 11, “Commitments and Contingencies” of the Notes to Consolidated Financial Statements in Item 8.

21

Table of Contents

Not applicable.

EXECUTIVE OFFICERS OF THE REGISTRANT

Our executive officers are elected by the Board of Directors and hold office until a successor is chosen or qualified or until their earlier resignation or removal. The following lists our executive officers and gives a brief description of their business experience as of March 2, 2015:

Michael C. Arnold, 58, has been our Chief Executive Officer and President since January 2011. Prior to joining the Company, he served as executive vice president for The Timken Company (“Timken”) and president of Timken’s Bearings and Power Transmission Group from 2007 to 2010. Timken is a global company that manufactures steel, bearings and related components. Mr. Arnold earned a Bachelor’s degree in Mechanical Engineering and an MBA in sales and marketing from the University of Akron. As previously disclosed by the Company, Mr. Arnold will be retiring from his positions with the Company and its subsidiaries in 2015. An exact date for Mr. Arnold’s retirement has not yet been determined.

Edward J. Lehner, 49, has been our Executive Vice President and Chief Financial Officer since August 2012. Prior to joining the Company, he served as chief financial officer and chief administrative officer for PSC Metals, Inc. from 2009 to 2012. PSC Metals is a North American ferrous and non-ferrous scrap processor. Mr. Lehner earned a Bachelor’s degree in Accounting from the University of Cincinnati.

Michael J. Burbach, 54, has been our President, North-West Region since October 2013. Prior to that time he had served the Company as its President, Midwest Region since 2007. Mr. Burbach began his metals career as an inside sales representative at Vincent Metals in 1984 and has held procurement, sales and product management roles in the metals industry as well as roles in operations and senior management. Mr. Burbach received his Bachelor of Science degree from the University of Wisconsin-La Crosse.

Roger W. Lindsay, 58, is President of our Canada Region and our Chief Human Resources Officer, positions he has held since August 2013. Prior to that time he had served as our Senior Vice President, Human Resources since joining the Company in October 2011. Prior to joining the Company, Mr. Lindsay was president of rail and Latin America for The Timken Company from 2010 until October 2011. He holds a bachelor’s degree in economics and sociology from the University of Southampton and a master’s degree in management from the Massachusetts Institute of Technology.

Kevin D. Richardson, 53, has been our President, South-East Region since October 2007. Mr. Richardson started his metals career in 1985 and held a series of commercial and sales management roles before being named a Vice President of the Company in 2000. Mr. Richardson received a Bachelor’s degree in business management and economics from North Carolina State University and an MBA from Case Western University.

Erich S. Schnaufer, 47, has been the Company’s Controller and Chief Accounting Officer since 2007. Mr. Schnaufer received a Bachelor’s degree in accounting from the University of Illinois and an MBA from DePaul University.

Mark S. Silver, 44, has served as the Company’s Vice President & Managing Counsel since January 2013. He has also served as the Company’s Secretary since December 2014. Prior to his time at the Company, from 2006 until 2012, Mr. Silver served as Vice President and Assistant General Counsel of Sara Lee Corporation, a consumer-goods company. Mr. Silver earned a Bachelor’s degree in political science from the University of Illinois and a Juris Doctor from Harvard University.

22

Table of Contents

PART II

Market Information for Common Stock

Our common stock has been listed on the New York Stock Exchange (“NYSE”) since our initial public offering on August 13, 2014. Prior to that date, there was no public market for our common stock. The following table sets forth the high and low sale prices of our common stock as reported by the NYSE.

On February 27, 2015, the closing price of our common stock on the NYSE was $6.08 per share.

Holders

As of February 27, 2015, there were 8 stockholders of record of our common stock. Because many shares of our common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of beneficial stockholders represented by these record holders.

Dividend Policy

We have not declared any cash dividends for the past two years and we do not anticipate declaring or paying any regular cash dividends on our common stock in the foreseeable future. Any payment of cash dividends on our common stock in the future will be at the discretion of our Board of Directors and will depend upon our results of operations, earnings, capital requirements, financial condition, future prospects, contractual restrictions, including under the Ryerson Credit Facility and our outstanding notes, and other factors deemed relevant by our Board of Directors.

Performance Graph

The following graph and accompanying table show the cumulative total return to stockholders of Ryerson Holding’s common stock relative to the cumulative total returns of the S&P 500 and a metals service center peer group (the “Peer Group”). The graph tracks the performance of a $100 investment in each of the indices (with reinvestment of dividends) from August 13, 2014 to December 31, 2014. As of December 31, 2014 the Peer Group consisted of Reliance Steel & Aluminum Co., and Olympic Steel Inc., each of which has securities listed for trading on the NASDAQ; A.M. Castle & Co. which has securities listed for trading on the

23

Table of Contents

NYSE; and Russel Metals Inc., which has securities listed for trading on the Toronto Stock Exchange. The returns of each member of the Peer Group are weighted according to that member’s stock market capitalization. The stock price performance included in this graph is not necessarily indicative of future stock price performance.

Comparison of 5 Month Cumulative Total Return

Assumes Initial Investment of $100

December 2014

Use of Proceeds from Initial Public Offering of Common Stock

On August 7, 2014, we priced an initial public offering of our common stock pursuant to a Registration Statement (File No. 333-164484), that was declared effective on August 7, 2014. The offering closed on August 13, 2014. Under the Registration Statement, we registered, issued and sold an aggregate of 11,000,000 shares of our common stock at a price to the public of $11.00 per share.

The planned use of the proceeds did not differ materially from the actual use of proceeds. Net proceeds from the offering totaled $112.4 million, after deducting the underwriting discount and offering expenses, and were used to (i) redeem $99.5 million in aggregate principal amount of the 11 ¹⁄₄% Senior Notes due 2018 (the “2018 Notes”), (ii) pay Platinum Equity Advisors, LLC (“Platinum Advisors”) and its affiliates $15.0 million of the $25.0 million owed as consideration for terminating the advisory services agreement between JT Ryerson and Platinum Advisors, an affiliate of Platinum (the remaining $10.0 million will be paid in August 2015) and (iii) pay related transaction fees, expenses and debt redemption premiums in connection with the offering, which were approximately $11.2 million. We borrowed an additional $23.3 million under our amended and restated $1.35 billion revolving credit facility (the “Ryerson Credit Facility”) as part of the funding of these transactions. Platinum owns approximately 66% of our issued and outstanding common stock and four of our six directors are associated with Platinum.

Merrill Lynch, Pierce, Fenner & Smith Incorporated, Deutsch Bank Securities Inc., BMO Capital Markets Corp, and J.P. Morgan Securities LLC acted as managing underwriters for the offering.

24

Table of Contents

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

Recent Sale of Unregistered Securities and Use of Proceeds

None.

The following table sets forth our selected historical consolidated financial information. Our selected historical Consolidated Statements of Operations data for the years ended December 31, 2012, 2013 and 2014 and the summary historical balance sheet data as of December 31, 2013 and 2014 have been derived from our audited consolidated financial statements included in Item 8. “Financial Statements and Supplementary Data.” The selected historical Consolidated Statements of Operations data for the years ended December 31, 2010 and 2011and the summary historical balance sheet data as of December 31, 2010, 2011, and 2012 were derived from the audited financial statements and related notes thereto, which are not included in this Form 10-K.

The following consolidated financial information should be read together with Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the audited Consolidated Financial Statements of Ryerson Holding Corporation and the Notes thereto included in Item 8. “Financial Statements and Supplementary Data.”

25

Table of Contents

FIVE YEAR SUMMARY OF SELECTED FINANCIAL DATA AND OPERATING RESULTS

(Dollars in millions, except per ton and per share data)

26

Table of Contents

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

The following discussion and analysis should be read in conjunction with Item 6. “Selected Financial Data” and the audited Consolidated Financial Statements of Ryerson Holding Corporation and Subsidiaries and the Notes thereto in Item 8. “Financial Statements and Supplementary Data.” This discussion contains forward-looking statements that involve risks and uncertainties. See the section entitled “Special Note Regarding Forward-Looking Statements.” Our actual results and the timing of selected events could differ materially from those discussed in these forward-looking statements as a result of certain factors, including those discussed in Item 1A. “Risk Factors” and elsewhere in this Form 10-K.

Overview

Business

Ryerson Holding Corporation (“Ryerson Holding”), a Delaware corporation, is the parent company of Joseph T. Ryerson & Son, Inc. (“JT Ryerson”), a Delaware corporation. On December 17, 2014, Ryerson Inc. (“Ryerson”), formerly a direct, wholly-owned subsidiary of Ryerson Holding, merged with and into JT Ryerson which was previously an indirect, wholly-owned subsidiary of Ryerson Holding, with JT Ryerson as the surviving corporation. As a result of such merger, from and after December 17, 2014, JT Ryerson has been a direct, wholly-owned subsidiary of Ryerson Holding. Affiliates of Platinum Equity, LLC (“Platinum”) own approximately 66% of Ryerson Holding.

Ryerson Holding conducts materials distribution operations in the United States through its wholly-owned direct subsidiary JT Ryerson, in Canada through its indirect wholly-owned subsidiary Ryerson Canada, Inc., a Canadian corporation (“Ryerson Canada”) and in Mexico through its indirect wholly-owned subsidiary Ryerson Metals de Mexico, S. de R.L. de C.V., a Mexican corporation (“Ryerson Mexico”). In addition to our North American operations, we conduct materials distribution operations in China through Ryerson China Limited (“Ryerson China”), a company in which we have a 100% ownership percentage and in Brazil through Açofran Aços e Metais Ltda (“Açofran”), a company in which we have had a 50% direct ownership percentage since February 17, 2012. Unless the context indicates otherwise, Ryerson Holding, JT Ryerson, Ryerson Canada, Ryerson China, Ryerson Mexico and Açofran together with their subsidiaries (including Ryerson prior to its dissolution through merger), are collectively referred to herein as “Ryerson Holding,” “we,” “us,” “our,” or the “Company.”

On July 23, 2014, our Board of Directors approved a 4.25 for 1.00 stock split of the Company’s common stock effective August 5, 2014. Per share and share amounts presented herein have been adjusted for all periods presented to give retroactive effect to 4.25 for 1.00 stock split.

On August 13, 2014, Ryerson Holding completed an initial public offering of 11 million shares of common stock at a price to the public of $11.00 per share. Net proceeds from the offering totaled $112.4 million, after deducting the underwriting discount and offering expenses, and were used to (i) redeem $99.5 million in aggregate principal amount of the 11 ¹⁄₄% Senior Notes due 2018 (the “2018 Notes”), (ii) pay Platinum Equity Advisors LLC (“Platinum Advisors”), and its affiliates $15.0 million of the $25.0 million owed as consideration for terminating the services agreement between JT Ryerson and Platinum Advisors, an affiliate of Platinum (the remaining $10.0 million will be paid in August 2015) and (iii) pay related transaction fees, expenses and premiums in connection with the offering, which were approximately $11.2 million. We borrowed an additional $23.3 million under our amended and restated $1.35 billion revolving credit facility (the “Ryerson Credit Facility”) as part of the funding of these transactions.

Industry and Operating Trends

We purchase large quantities of metal products from primary producers and sell these materials in smaller quantities to a wide variety of metals-consuming industries. More than one-half of the metals products sold are processed by us by burning, sawing, slitting, blanking, cutting to length or other techniques. We sell our products and services to many industries, including industrial equipment manufacturing, industrial fabrication, electrical machinery production, transportation equipment manufacturing, heavy equipment manufacturing and oil and gas. Revenue is recognized upon delivery of product to customers. The timing of shipment is substantially the same as the timing of delivery to customers given the proximity of our distribution sites to our customers.

27

Table of Contents

Sales, cost of materials sold, gross profit and operating expense control are the principal factors that impact our profitability:

Net Sales. Our sales volume and pricing is driven by market demand, which is largely determined by overall industrial production and conditions in specific industries in which our customers operate. Sales prices are also primarily driven by market factors such as overall demand and availability of product. Our net sales include revenue from product sales, net of returns, allowances, customer discounts and incentives.

Cost of materials sold. Cost of materials sold includes metal purchase and in-bound freight costs, third-party processing costs and direct and indirect internal processing costs. The cost of materials sold fluctuates with our sales volume and our ability to purchase metals at competitive prices. Increases in sales volume generally enable us both to improve purchasing leverage with suppliers, as we buy larger quantities of metals inventories, and to reduce operating expenses per ton sold.

Gross profit. Gross profit is the difference between net sales and the cost of materials sold. Our sales prices to our customers are subject to market competition. Achieving acceptable levels of gross profit is dependent on our acquiring metals at competitive prices, our ability to manage the impact of changing prices and efficiently managing our internal and external processing costs.

Operating expenses. Optimizing business processes and asset utilization to lower fixed expenses such as employee, facility and truck fleet costs which cannot be rapidly reduced in times of declining volume, and maintaining low fixed cost structure in times of increasing sales volume, have a significant impact on our profitability. Operating expenses include costs related to warehousing and distributing our products as well as selling, general and administrative expenses.

The metals service center industry is generally considered cyclical with periods of strong demand and higher prices followed by periods of weaker demand and lower prices due to the cyclical nature of the industries in which the largest consumers of metals operate. However, domestic metals prices are volatile and remain difficult to predict due to its commodity nature and the extent which prices are affected by interest rates, foreign exchange rates, energy prices, international supply/demand imbalances, surcharges and other factors.

28

Table of Contents

Results of Operations

Comparison of the year ended December 31, 2014 with the year ended December 31, 2013

Net Sales

Net sales increased 4.7% to $3.6 billion in 2014 as compared to $3.5 billion in 2013. Average selling price increased 5.4% while tons sold decreased 0.7% reflecting stable economic conditions in the metals market in 2014 compared to 2013. The average selling price per ton increased in 2014 to $1,790 from $1,698 in 2013. Average selling prices per ton increased for most of our product lines in 2014 with the largest increase in our stainless steel plate, carbon steel plate and carbon steel flat product lines. Tons sold in 2014 decreased for our carbon steel flat and aluminum long product lines, offset by increased tons sold for our aluminum sheet and aluminum plate product lines. Tons sold per ship day were 8,032 in 2014 as compared to 8,087 in 2013.

Cost of Materials Sold

Cost of materials sold increased 6.5% to $3.0 billion in 2014 compared to $2.8 billion in 2013. The increase in cost of materials sold in 2014 compared to 2013 was primarily due to an increase in the average cost of materials sold per ton. The average cost of materials sold per ton increased to $1,497 in 2014 from $1,396 in 2013. The average cost of materials sold for our carbon steel flat, carbon steel plate and stainless steel flat product lines increased more than our other products, in line with the change in average selling price per ton.

During 2014, LIFO expense was $42 million related to increases in pricing for all product lines. During 2013, LIFO income was $33 million related to decreases in pricing for all product lines.

29

Table of Contents

Gross Profit

Gross profit as a percentage of sales decreased to 16.4% in 2014 compared to 17.8% in 2013 due to, among other things, an increase in cost of materials sold, as discussed above. Gross profit decreased 3.7% to $593.8 million in 2014 as compared to $616.6 million in 2013.

Operating Expenses

Operating expenses as a percentage of sales decreased to 14.0% in 2014 from 14.2% in 2013. Operating expenses in 2014 increased $15.4 million from $492.0 million in 2013 primarily due to the following reasons:

These changes were partially offset by:

On a per ton basis, operating expenses increased to $250 per ton in 2014 from $241 per ton in 2013.

Operating Profit

As a result of the factors above, in 2014 we reported an operating profit of $86.4 million, or 2.4% of sales, compared to an operating profit of $124.6 million, or 3.6% of sales, in 2013.

Other Expenses

Interest and other expense on debt decreased to $107.4 million in 2014 from $110.5 million in 2013 primarily due to a lower level of debt outstanding in 2014 after we used a portion of the proceeds from our initial public offering to redeem $99.5 million principal amount of our 11 ¹⁄₄% Senior Notes due 2018 (the “2018 Notes”) in September of 2014. Other income and (expense), net was expense of $5.9 million in 2014 compared to expense of $0.2 million in 2013. The year 2014 net expense was primarily related to a $11.2 million loss on the early redemption premium on the redemption of the $99.5 million principal amount of the 2018 Notes, partially offset by $5.3 million of foreign currency gains.

Provision for Income Taxes

The Company recorded an income tax benefit of $0.7 million in 2014 compared to an income tax benefit of $112.3 million in 2013. The $0.7 million income tax benefit in 2014 results from a tax benefit in the U.S. and the impact of certain initial public offering related transactions that are recognized differently for U.S. tax purposes, offset by tax expense in foreign subsidiaries. The $112.3 million income tax benefit in 2013 primarily relates to a reduction in valuation allowance previously recorded against U.S. deferred tax assets.

Noncontrolling Interest

Ryerson China’s and Açofran’s results of operations was a loss in 2014 and 2013. The portion of the loss attributable to the noncontrolling interest in Ryerson China and Açofran was $0.5 million for 2014 and $1.1 million for 2013.

30

Table of Contents

Earnings Per Share

Basic and diluted earnings (loss) per share was a loss of $1.01 in 2014 and earnings of $5.99 in 2013. The changes in earnings per share are due to the results of operations discussed above as well as an increase of 4.1 million in average shares outstanding in 2014 compared to 2013 after the issuance of 11.0 million shares of common stock in an initial public offering on August 8, 2014.

Comparison of the year ended December 31, 2013 with the year ended December 31, 2012

Net Sales

Net sales decreased 14.0% to $3.5 billion in 2013 as compared to $4.0 billion in 2012. Tons sold per ship day were 8,087 in 2013 as compared to 8,528 in 2012. Volume decreased 5.2% in 2013 primarily due to weaker economic conditions in the metals market in 2013. The average selling price per ton decreased in 2013 to $1,698 from $1,873 in 2012 reflecting weaker market conditions compared to 2012. Average selling prices per ton decreased for all of our product lines in 2013 with the largest decrease in our carbon steel plate, stainless steel plate and stainless steel long product lines. Tons sold in 2013 decreased across all of our product lines compared to 2012 with the largest decreases in shipments of our aluminum plate, carbon steel plate and aluminum flat product lines.

Cost of Materials Sold

Cost of materials sold decreased 14.2% to $2.8 billion in 2013 compared to $3.3 billion in 2012. The decrease in cost of materials sold in 2013 compared to 2012 was primarily due to a decrease in the average cost of materials sold per ton in addition to the decrease in tons sold. The average cost of materials sold per ton decreased to $1,396 in 2013 from $1,543 in 2012. The average cost of materials sold for our carbon steel plate, stainless steel plate and stainless steel long product lines decreased more than our other products, in line with the change in average selling price per ton.

During 2013, LIFO income was $33 million related to decreases in pricing for all product lines. During 2012, LIFO income was $63 million related to decreases in pricing for all product lines.

Gross Profit

Gross profit as a percentage of sales improved to 17.8% in 2013 compared to 17.6% in 2012 due to, among other things, a decrease in cost of materials sold, as discussed above. Gross profit decreased 13.1% to $616.6 million in 2013 as compared to $709.6 million in 2012.

Operating Expenses

Operating expenses as a percentage of sales increased to 14.2% in 2013 from 12.6% in 2012. Operating expenses in 2013 decreased $17.3 million from $509.3 million in 2012 primarily due to the following reasons:

These changes were partially offset by:

On a per ton basis, operating expenses increased to $241 per ton in 2013 from $237 per ton in 2012.

Operating Profit

As a result of the factors above, in 2013 we reported an operating profit of $124.6 million, or 3.6% of sales, compared to an operating profit of $200.3 million, or 5.0% of sales, in 2012.

31

Table of Contents

Other Expenses

Interest and other expense on debt decreased to $110.5 million in 2013 from $126.5 million in 2012, primarily due to lower interest rates after we refinanced our debt in the fourth quarter of 2012. On October 10, 2012, we issued $600 million of 9% Senior Secured Notes due 2017 (the “2017 Notes”) and $300 million of 11 ¹⁄₄% Senior Notes due 2018 (the “2018 Notes” and, together with the 2017 Notes, the “2017 and 2018 Notes”). In connection therewith, we redeemed the $368.7 million outstanding principal of our 12% Senior Secured Notes due November 1, 2015 (“2015 Notes”), $102.9 million outstanding principal of our Floating Rate Senior Secured Notes due November 1, 2014 (“2014 Notes” and, together with the 2015 Notes, the “Ryerson Notes”) and $344.9 million outstanding principal of our 14 ¹⁄₂% Senior Discount Notes due 2015 (the “Ryerson Holding Notes”). In addition, interest expense on our credit agreement borrowings was lower in 2013 compared to 2012 primarily due to a lower level of borrowings outstanding. Other income and (expense), net was expense of $0.2 million in 2013 as compared to expense of $33.5 million in 2012. The year 2012 expense was primarily related to a $32.8 million loss on the redemption of the Ryerson Notes and the Ryerson Holding Notes.

Provision for Income Taxes

The Company recorded an income tax benefit of $112.3 million in 2013 compared to an income tax benefit of $5.5 million in 2012. The $112.3 million income tax benefit in 2013 primarily relates to a reduction in valuation allowance previously recorded against U.S. deferred tax assets. The $5.5 million income tax benefit in 2012 primarily relates to the impact of acquisition-related elections and settlements, as well as net changes in valuation allowance.

Noncontrolling Interest

Ryerson China’s and Açofran’s results of operations was a loss in 2013 and 2012. The portion of the loss attributable to the noncontrolling interest in Ryerson China and Açofran was $1.1 million for 2013 and $1.3 million for 2012.

Earnings Per Share

Basic and diluted earnings per share was $5.99 in 2013 and $2.22 in 2012. The changes in earnings per share are due to the results of operations discussed above.

Liquidity and Capital Resources

The Company’s primary sources of liquidity are cash and cash equivalents, cash flows from operations and borrowing availability under the $1.35 billion revolving credit facility agreement (as amended and restated, the “Ryerson Credit Facility”) that matures on the earlier of (a) April 3, 2018 or (b) August 16, 2017 (60 days prior to the scheduled maturity date of the 2017 Notes), if the 2017 Notes are then outstanding. Its principal source of operating cash is from the sale of metals and other materials. Its principal uses of cash are for payments associated with the procurement and processing of metals and other materials inventories, costs incurred for the warehousing and delivery of inventories and the selling and administrative costs of the business, capital expenditures, and for interest payments on debt.

The following table summarizes the Company’s cash flows:

The Company had cash and cash equivalents at December 31, 2014 of $60.0 million, compared to $74.4 million at December 31, 2013 and $71.2 million at December 31, 2012. The Company had $1,259 million, $1,295 million and $1,305 million of total debt outstanding, a debt-to-capitalization ratio of 111%, 109% and 129% and $245 million, $234 million and $293 million available under the Ryerson Credit Facility at December 31, 2014, 2013 and 2012, respectively. The Company had total liquidity (defined as cash and cash equivalents, marketable securities and availability under the Ryerson Credit Facility and foreign debt facilities) of $328 million, $351 million and $406 million at December 31, 2014, 2013 and 2012, respectively. Total liquidity is not a U.S. generally accepted accounting principles (“GAAP”) financial measure. We believe that total liquidity provides additional information for measuring our ability to fund our operations. Total liquidity does not represent, and should not be used as a substitute for, net income or cash flows from operations as determined in accordance with GAAP and total liquidity is not necessarily an indication of whether cash flow will be sufficient to fund our cash requirements.

32

Table of Contents

Below is a reconciliation of cash and cash equivalents to total liquidity:

Of the total cash and cash equivalents as of December 31, 2014, $43 million was held in subsidiaries outside the United States which is deemed to be permanently reinvested. Ryerson Holding does not currently foresee a need to repatriate funds from its non-U.S. subsidiaries. Although the Company has historically satisfied needs for more capital in the U.S. through debt or equity issuances, it could elect to repatriate funds held in foreign jurisdictions which could result in higher effective tax rates. The Company has not recorded a deferred tax liability for the effect of a possible repatriation of these assets as management intends to permanently reinvest these assets outside of the U.S. Specific plans for reinvestment include funding for future international acquisitions and funding of existing international operations.

During the year ended December 31, 2014, net cash used in operating activities was $73.3 million. During the years ended December 31, 2013 and 2012, net cash provided by operating activities was $48.1 million, and $186.5 million, respectively. Net income (loss) was a loss of $26.2 million for the year ended December 31, 2014 and income of $126.2 million and $45.8 million for the years ended December 31, 2013 and 2012, respectively. Cash used in operating activities of $73.3 million during the year ended December 31, 2014 was primarily the result of pension contributions of $55.4 million, the net loss in 2014 of $26.2 million, a decrease in accounts payable of $22.4 million and an increase in accounts receivable of $19.5 million reflecting higher sales in 2014, partially offset by non-cash depreciation and amortization expense of $45.6 million. Cash provided by operating activities of $48.1 million during the year ended December 31, 2013 was primarily the result of the $126.2 million of net income in 2013, non-cash depreciation and amortization expense of $46.6 million, an increase in accounts payable of $15.7 million, non-cash impairment charges on fixed assets and goodwill of $10.0 million and a decrease in accounts receivable of $9.9 million reflecting lower sales in 2013, partially offset by the non-cash reduction in the valuation allowance recorded against deferred tax assets of $124.2 million and pension contributions of $48.0 million. In addition to the $45.8 million of net income in 2012, cash provided by operating activities of $186.5 million during the year ended December 31, 2012 was primarily the result of a decrease in accounts receivable of $120.8 million reflecting lower volume in 2012 and non-cash depreciation and amortization expense of $47.0 million and non-cash interest amortization of $39.0 million, partially offset by pension contributions of $45.9 million and a decrease in accounts payable of $38.3 million.

Net cash used by investing activities was $34.0 million, $13.5 million and $35.3 million in 2014, 2013 and 2012, respectively. Capital expenditures for the years ended December 31, 2014, 2013 and 2012, were $21.6 million, $20.2 million and $40.8 million, respectively. On December 31, 2014, the Company paid $20.1 million to acquire all of the issued and outstanding capital stock of Fay Industries, Inc. and the membership interests of Fay Group, Ltd. In 2012, the Company had a cash outflow of $5.1 million for an acquisition. The Company sold property, plant and equipment and assets held for sale generating cash proceeds of $7.3 million, $4.6 million and $11.6 million during the years ended December 31, 2014, 2013 and 2012, respectively.

Net cash provided by financing activities was $100.5 million for the year ended December 31, 2014. In 2014, we received $112.4 million in proceeds from the issuance of stock in an initial public offering and used $110.7 million of the proceeds to redeem $99.5 million principal amount of our 2018 Notes and pay a $11.2 million redemption premium. In addition, credit facility borrowings in 2014 increased $63.8 million primarily to fund cash used in operating activities as well as capital expenditures and book overdrafts increased $36.0 million. Net cash used in financing activities was $26.6 million for the year ended December 31, 2013. In 2013, credit facility borrowings decreased $10.6 million, we paid $6.6 million to purchase 50,000 shares of our common stock and we paid $3.7 million in fees to amend our credit facility. Net cash used in financing activities was $143.4 million for the year ended December 31, 2012, primarily due to the redemption of the Ryerson Notes and the Ryerson Holding Notes for $829.5 million, a distribution of $35.0 million to Platinum, repayment of credit facility borrowings for $149.0 million, and the payment of $18.1 million in fees related to the issuance of the 2017 and 2018 Notes, partially offset by the issuance of the 2017 and 2018 Notes for $900.0 million. The $149.0 million reduction in credit facility borrowings was primarily due to the $186.5 million of net cash provided by operating activities and excess proceeds from the issuance of the 2017 and 2018 Notes over the redemption of the Ryerson Notes and Ryerson Holding Notes, partially offset by the capital spending of $40.8 million and the distribution of $35.0 million to Platinum. We believe that cash flow from operations and proceeds from the Ryerson Credit Facility will provide sufficient funds to meet our contractual obligations and operating requirements in the normal course of business.

33

Table of Contents

Total Debt

Total debt at December 31, 2014 decreased $35.7 million to $1,259.1 million from $1,294.8 million at December 31, 2013 as a result of redeeming $99.5 million of the 2018 Notes offset by net cash used in operating activities.

Total debt outstanding as of December 31, 2014 consisted of the following amounts: $435.0 million borrowing under the Ryerson Credit Facility, $600.0 million under the 2017 Notes, $200.5 million under the 2018 Notes, and $23.6 million of foreign debt. Availability at December 31, 2014 and 2013 under the Ryerson Credit Facility was $245 million and $234 million, respectively. Discussion of our outstanding debt follows.

Ryerson Credit Facility

On April 3, 2013, the Company amended and restated the Ryerson Credit Facility to, among other things, extend the maturity date to the earlier of (a) April 3, 2018 or (b) August 16, 2017 (60 days prior to the scheduled maturity date of the 2017 Notes), if the 2017 Notes are then outstanding. At December 31, 2014, the Company had $435.0 million of outstanding borrowings, $20 million of letters of credit issued and $245 million available under the $1.35 billion Ryerson Credit Facility compared to $369.1 million of outstanding borrowings, $27 million of letters of credit issued and $234 million available at December 31, 2013. Total credit availability is limited by the amount of eligible accounts receivable and inventory pledged as collateral under the agreement insofar as the Company is subject to a borrowing base comprised of the aggregate of these two amounts, less applicable reserves. Eligible accounts receivable, at any date of determination, are comprised of the aggregate value of all accounts directly created by a borrower in the ordinary course of business arising out of the sale of goods or the rendition of services, each of which has been invoiced, with such receivables adjusted to exclude various ineligible accounts, including, among other things, those to which a borrower does not have sole and absolute title and accounts arising out of a sale to an employee, officer, director, or affiliate of a borrower. Eligible inventory, at any date of determination, is comprised of the aggregate value of all inventory owned by a borrower, with such inventory adjusted to exclude various ineligible inventory, including, among other things, any inventory that is classified as “supplies” or is unsaleable in the ordinary course of business and 50% of the value of any inventory that (i) has not been sold or processed within a 180 day period and (ii) which is calculated to have more than 365 days of supply based upon the immediately preceding 6 months consumption. The weighted average interest rate on the borrowings under the Ryerson Credit Facility was 2.0 percent and 2.1 percent at December 31, 2014 and December 31, 2013, respectively.

The total $1.35 billion revolving credit facility has an allocation of $1.215 billion to the Company’s subsidiaries in the United States and an allocation of $135 million to Ryerson Canada. Amounts outstanding under the U.S. facility bear interest at a rate determined by reference to the base rate (Bank of America’s prime rate) or a LIBOR rate or, for the Canadian facility a rate determined by reference to the Canadian base rate (Bank of America-Canada Branch’s “Base Rate” for loans in U.S. Dollars in Canada) or the BA rate (average annual rate applicable to Canadian Dollar bankers’ acceptances) or a LIBOR rate and the Canadian prime rate (Bank of America-Canada Branch’s “Prime Rate.”). The spread over the base rate and Canadian prime rate is between 0.50% and 1.00% and the spread over the LIBOR and for the bankers’ acceptances is between 1.50% and 2.00%, depending on the amount available to be borrowed. Overdue amounts and all amounts owed during the existence of a default bear interest at 2% above the rate otherwise applicable thereto. The Company also pays commitment fees on amounts not borrowed at a rate between 0.25% and 0.375% depending on the average borrowings as a percentage of the total $1.35 billion agreement during a rolling three month period.

Borrowings under the Ryerson Credit Facility are secured by (i) in the case of the U.S. facility, first-priority liens on all of the inventory, accounts receivable, lockbox accounts (excluding any proceeds therein of collateral securing the 2017 Notes on a first priority lien basis) and related U.S. assets of JT Ryerson, the U.S. subsidiary borrowers and certain other U.S. subsidiaries of the Company that act as guarantors, and (ii) in the case of the Canadian facility, the assets securing the U.S. Facility and also first priority liens on all of the inventory, accounts receivable, lockbox accounts and related assets of Ryerson’s Canadian subsidiary borrower and its Canadian subsidiaries that act as guarantors thereof.

The Ryerson Credit Facility contains covenants that, among other things, restrict the Company and its subsidiaries with respect to the incurrence of debt, the creation of liens, transactions with affiliates, mergers and consolidations, sales of assets and acquisitions. The Ryerson Credit Facility also requires that, if availability under such facility falls below a certain level, the Company maintain a minimum fixed charge coverage ratio as of the end of each calendar month.

34

Table of Contents

The Ryerson Credit Facility contains events of default with respect to, among other things, default in the payment of principal when due or the payment of interest, fees and other amounts due thereunder after a specified grace period, material misrepresentations, failure to perform certain specified covenants, certain bankruptcy events, the invalidity of certain security agreements or guarantees, material judgments and the occurrence of a change of control of the Company. If such an event of default occurs, the lenders under the Ryerson Credit Facility will be entitled to various remedies, including acceleration of amounts outstanding under the Ryerson Credit Facility and all other actions permitted to be taken by secured creditors.

The lenders under the Ryerson Credit Facility have the ability to reject a borrowing request if any event, circumstance or development has occurred that has had or could reasonably be expected to have a material adverse effect on the Company. If JT Ryerson or any significant subsidiaries of the other borrowers becomes insolvent or commences bankruptcy proceedings, all amounts borrowed under the Ryerson Credit Facility will become immediately due and payable.

Proceeds from borrowings under the Ryerson Credit Facility and repayments of borrowings thereunder that are reflected in the Consolidated Statements of Cash Flows represent borrowings under the Company’s revolving credit agreement with original maturities greater than three months. Net proceeds (repayments) under the Ryerson Credit Facility represent borrowings under the Ryerson Credit Facility with original maturities less than three months.

2017 and 2018 Notes

On October 10, 2012, Ryerson Inc. and its wholly owned subsidiary, Joseph T. Ryerson & Son, Inc., issued the 2017 and 2018 Notes. On December 17, 2014, Ryerson Inc. merged with and into JT Ryerson, with JT Ryerson as the surviving corporation. JT Ryerson assumed all debts, obligations, and liabilities of Ryerson, including all obligations and liabilities of Ryerson with respect to the 2017 and 2018 Notes. The 2017 Notes bear interest at a rate of 9% per annum. The 2018 Notes bear interest at a rate of 11.25% per annum. The 2017 Notes are fully and unconditionally guaranteed on a senior secured basis and the 2018 Notes are fully and unconditionally guaranteed on a senior unsecured basis by all of our existing and future domestic subsidiaries that are co-borrowers or guarantee obligations under the Ryerson Credit Facility.

The 2017 Notes and related guarantees are secured by a first-priority lien on substantially all of our and our guarantors’ present and future assets located in the United States (other than receivables, inventory, related general intangibles, certain other assets and proceeds thereof), subject to certain exceptions and customary permitted liens. The 2017 Notes and related guarantees are secured on a second-priority basis by a lien on the assets that secure our obligations under the Ryerson Credit Facility. The 2018 Notes are not secured. The 2017 and 2018 Notes contain customary covenants that, among other things, limit, subject to certain exceptions, our ability, and the ability of our restricted subsidiaries, to incur additional indebtedness, pay dividends on our capital stock or repurchase our capital stock, make investments, sell assets, engage in acquisitions, mergers or consolidations or create liens or use assets as security in other transactions. Subject to certain exceptions, JT Ryerson may only pay dividends to Ryerson Holding to the extent of 50% of future net income, once prior losses are offset. The 2017 Notes will become redeemable by the Company, in whole or in part, at any time on or after April 15, 2015 (the “2017 Redemption Date”) and the 2018 Notes will become redeemable, in whole or in part, at any time on or after October 15, 2015 (the “2018 Redemption Date”), in each case at specified redemption prices. The 2017 and 2018 Notes are redeemable prior to such dates, as applicable, at a redemption price equal to 100% of the principal amount, together with accrued and unpaid interest, if any, to the redemption date, plus a make-whole premium. Additionally, we may redeem up to 35% of each of the 2017 and 2018 Notes prior to the 2017 Redemption Date or 2018 Redemption Date, as applicable, with net cash proceeds from certain equity offerings at a price equal to (a) 109.000%, with respect to the 2017 Notes and (b) 111.250%, with respect to the 2018 Notes, of the principal amount thereof, plus any accrued and unpaid interest. On August 13, 2014, Ryerson Holding completed an initial public offering of 11 million shares of common stock at a price to the public of $11.00 per share. Net proceeds from the offering were used to redeem $99.5 million in aggregate principal amount of the 2018 Notes and pay redemption premiums of $11.2 million, which were recorded within other income and (expense), net. As of December 31, 2014, $200.5 million of the original outstanding principal amount of the 2018 Notes remain outstanding. If a change of control occurs, JT Ryerson must offer to purchase the 2017 and 2018 Notes at 101% of their principal amount, plus accrued and unpaid interest.

Pursuant to registration rights agreements relating to the 2017 and 2018 Notes, we agreed to file with the SEC by July 7, 2013, registration statements with respect to offers to exchange each of the 2017 and 2018 Notes for new issues of our debt securities registered under the Securities Act, with terms substantially identical to those of the 2017 and 2018 Notes and to consummate such exchange offers no later than October 5, 2013. Ryerson completed the exchange offer on September 10, 2013. As a result of completing the exchange offer, Ryerson satisfied its obligation under the registration rights agreements covering each of the 2017 and 2018 Notes.

35

Table of Contents

Ryerson Holding Notes

As of November 1, 2012, all of the Ryerson Holding Notes were repurchased or redeemed and cancelled. The Company recorded a $15.6 million loss on the repurchase and cancellation of debt related to the Ryerson Holding Notes within other income and (expense), net on the Consolidated Statements of Operations.

2014 and 2015 Notes

As of November 1, 2012, all of the Ryerson Notes were repurchased or redeemed and cancelled. The Company recorded a $17.2 million loss on the repurchase and cancellation of debt related to the Ryerson Notes within other income and (expense), net on the Consolidated Statements of Operations.

Foreign Debt

At December 31, 2014, Ryerson China’s total foreign borrowings were $23.6 million, which were owed to banks in Asia at a weighted average interest rate of 4.4% and secured by inventory and property, plant and equipment. At December 31, 2013, Ryerson China’s total foreign borrowings were $25.7 million, which were owed to banks in Asia at a weighted average interest rate of 4.3% and secured by inventory and property, plant and equipment.

Availability under the foreign credit lines was $12 million and $22 million at December 31, 2014 and December 31, 2013, respectively. Letters of credit issued by our foreign subsidiaries totaled $2 million and $4 million at December 31, 2014 and December 31, 2013, respectively.

Pension Funding

The Company made contributions of $55.4 million in 2014, $48.0 million in 2013 and $45.9 million in 2012 to improve the Company’s pension plans funded status. At December 31, 2014, as reflected in Note 10 to the Consolidated Financial Statements, pension liabilities exceeded plan assets by $277 million. The Company anticipates that it will have a minimum required pension contribution of approximately $43 million in 2015 under the Employee Retirement Income Security Act of 1974 (“ERISA”), Pension Protection Act in the U.S and the Ontario Pension Benefits Act in Canada. Future contribution requirements depend on the investment returns on plan assets, the impact of discount rates on pension liabilities, and changes in regulatory requirements. The Company is unable to determine the amount or timing of any such contributions required by ERISA or whether any such contributions would have a material adverse effect on the Company’s financial position or cash flows. The Company believes that cash flow from operations and the Ryerson Credit Facility described above will provide sufficient funds to make the minimum required contribution in 2015.

Income Tax Payments

The Company made income tax payments of $1.6 million, $1.2 million and $5.2 million in 2014, 2013 and 2012, respectively.

Off-Balance Sheet Arrangements

In the normal course of business with customers, vendors and others, we have entered into off-balance sheet arrangements, such as letters of credit, which totaled $22 million as of December 31, 2014. Additionally, other than normal course long-term operating leases included in the following Contractual Obligations table, we do not have any material off-balance sheet financing arrangements. None of these off-balance sheet arrangements are likely to have a material effect on our current or future financial condition, results of operations, liquidity or capital resources.

36

Table of Contents

Contractual Obligations

The following table presents contractual obligations at December 31, 2014:

Capital Expenditures

Capital expenditures during 2014, 2013 and 2012 totaled $21.6 million, $20.2 million and $40.8 million, respectively. Capital expenditures were primarily for machinery and equipment.

The Company anticipates capital expenditures, excluding acquisitions, to be approximately $30 million in 2015. The spending includes improvements in the Company’s North American processing capabilities and expenditures in emerging markets.

Restructuring

2014

In 2014, the Company paid $0.7 million in tenancy costs related to a facility closed in 2013. In 2014, the Company also recorded a $0.1 million reduction to the reserve for tenancy-related costs and credited warehousing, delivery, selling, general and administrative expense in the Consolidated Statements of Operations. The remaining tenancy-related costs of $0.7 million are expected to be paid through 2019. During 2014, the Company also paid the remaining $0.1 million of employee costs related to the closure of this facility.

2013

In 2013, the Company recorded a charge of $2.1 million related to a facility closure. The charge consists of tenancy-related costs, primarily future lease payments. In 2012, the Company recorded a $1.3 million charge for employee-related costs for this facility closure, which is discussed below. In 2013, the Company also recorded a $0.2 million reduction to the reserve for employee-related costs and credited restructuring and other charges in the Consolidated Statements of Operations. During 2013, the Company paid $0.7 million for employee-related costs and $0.5 million for tenancy-related costs for this facility closure.

37

Table of Contents

2012

In 2012, the Company recorded a charge of $1.3 million related to the closure of one of its facilities. The charge consists of employee-related costs, primarily severance for 42 employees. In the fourth quarter of 2012, the Company paid $0.3 million in employee costs related to this facility closure.

During 2012, the Company paid $4.0 million in employee costs and $0.2 million in tenancy costs related to its October 2011 reorganization plan. The Company also recorded a $0.4 million reduction to this reorganization reserve for employee-related costs and recorded a charge of $0.2 million related to tenancy costs. The $0.2 million net credit reduced the reserve for the October 2011 reorganization to zero and was credited to restructuring and other charges in the Consolidated Statements of Operations.

In 2012, the Company paid the remaining $0.1 million of employee costs related to the facility closed in the fourth quarter of 2010.

Deferred Tax Amounts

At December 31, 2014, the Company had a net deferred tax asset of $27 million comprised primarily of a deferred tax asset of $106 million related to pension liabilities, a deferred tax asset related to postretirement benefits other than pensions of $37 million, $30 million of Alternative Minimum Tax (“AMT”) credit carryforwards and deferred tax assets of $97 million related to federal, local and foreign tax loss carryforwards, offset by a valuation allowance of $22 million and deferred tax liabilities of $97 million related to fixed assets and $130 million related to inventory.

The Company’s deferred tax assets include $76 million related to U.S. federal net operating loss (“NOL”) carryforwards, $11 million related to state NOL carryforwards and $10 million related to foreign NOL carryforwards, available at December 31, 2014.

In accordance with FASB ASC 740, “Income Taxes,” the Company assesses the realizability of its deferred tax assets. The Company records a valuation allowance when, based upon the evaluation of all available evidence, it is more-likely-than-not that all or a portion of the deferred tax assets will not be realized. In making this determination, we analyze, among other things, our recent history of earnings, the nature and timing of reversing book-tax temporary differences, tax planning strategies and future income. After considering both the positive and negative evidence available, in the second quarter of 2009, the Company determined that it was more-likely-than-not that it would not realize a portion of its U.S. deferred tax assets. As a result, the Company established a valuation allowance against a portion of its U.S. deferred tax assets. The Company released a portion of the valuation allowance related to one of its U.S. subsidiaries, JT Ryerson, during 2012. The Company released most of the remaining U.S. related valuation allowance during 2013. As of December 31, 2013, the Company had a valuation allowance of $23.1 million, a decrease of $124.2 million from the prior year. Of the $124.2 million decrease in 2013, $124.2 million was credited to the income tax provision and none was charged to other comprehensive income. As of December 31, 2014, the Company had a valuation allowance of $22.5 million, a decrease of $0.6 million from the prior year. Of the $0.6 million decrease in 2014, $0.6 million was credited to the income tax provision and none was charged to other comprehensive income.

During 2013, the Company recognized a total net tax benefit of $124.2 million related to changes in valuation allowance predominately related to the release of valuation allowance related to certain U.S. federal and state deferred tax assets at December 31, 2013. This release of valuation allowance produced a deferred tax benefit that is not expected to recur.

As described in Note 1 to the Consolidated Financial Statements, the Company assesses the need for a valuation allowance considering all available positive and negative evidence, including past operating results, projections of future taxable income and the feasibility of ongoing tax planning strategies. The fourth quarter of 2013 was the first quarter in which the Company’s overall U.S. operations had sustained an operating profit in both the preceding cumulative three fiscal year period and in each of its two preceding fiscal years, providing objective evidence of the Company’s ability to earn future profits. Combined with the Company’s projections of future income providing additional subjective evidence of the Company’s ability to earn future profits and management’s judgment, the Company determined that these deferred tax assets were more likely than not realizable and accordingly the valuation allowance was no longer required.

38

Table of Contents

The Company will continue to maintain a valuation allowance on certain U.S. federal and state deferred tax assets until such time as in management’s judgment, considering all available positive and negative evidence, the Company determines that these deferred tax assets are more likely than not realizable.

Critical Accounting Estimates

Preparation of this Form 10-K requires us to make estimates and assumptions that affect the reported amount of assets and liabilities, disclosure of contingent assets and liabilities at the date of our financial statements, and the reported amounts of sales and expenses during the reporting period. Our critical accounting policies, including the assumptions and judgments underlying them, are disclosed in Item 8 within Note 1: Summary of Accounting and Financial Policies. These policies have been consistently applied and address such matters as revenue recognition, depreciation methods, inventory valuation, asset impairment recognition and pension and postretirement expense. While policies associated with estimates and judgments may be affected by different assumptions or conditions, we believe our estimates and judgments associated with the reported amounts are appropriate in the circumstances. Actual results may differ from those estimates.

We consider the policies discussed below as critical to an understanding of our financial statements, as application of these policies places the most significant demands on management’s judgment, with financial reporting results relying on estimation of matters that are uncertain.

Provision for allowances, claims and doubtful accounts: We perform ongoing credit evaluations of customers and set credit limits based upon review of the customers’ current credit information and payment history. We monitor customer payments and maintain a provision for estimated credit losses based on historical experience and specific customer collection issues that we have identified. Estimation of such losses requires adjusting historical loss experience for current economic conditions and judgments about the probable effects of economic conditions on certain customers. We cannot guarantee that the rate of future credit losses will be similar to past experience. Provisions for allowances and claims are based upon historical rates, expected trends and estimates of potential returns, allowances, customer discounts and incentives. We consider all available information when assessing the adequacy of the provision for allowances, claims and doubtful accounts.

Inventory valuation: Our inventories are stated at the lower of cost or market. Inventory costs reflect metal and in-bound freight purchase costs, third-party processing costs and internal direct and allocated indirect processing costs. Cost is primarily determined by the LIFO method. We regularly review inventory on hand and record provisions for obsolete and slow-moving inventory based on historical and current sales trends. Changes in product demand and our customer base may affect the value of inventory on hand which may require higher provisions for obsolete inventory.

Income Taxes: Our income tax expense, deferred tax assets and liabilities and reserve for uncertain tax positions reflect our best estimate of taxes to be paid. The Company is subject to income taxes in the U.S. and several foreign jurisdictions. The determination of the consolidated income tax expense requires judgment and estimation by management. It is possible that actual results could differ from the estimates that management has used to determine its consolidated income tax expense.

We record operating loss and tax credit carryforwards and the estimated effect of temporary differences between the tax basis of assets and liabilities and the reported amounts in the Consolidated Balance Sheet. We follow detailed guidelines in each tax jurisdiction when reviewing tax assets recorded on the balance sheet and provide for valuation allowances as required. Deferred tax assets are reviewed for recoverability based on historical taxable income, the expected reversals of existing temporary differences, tax planning strategies and on forecasts of future taxable income. The forecasts of future taxable income require assumptions regarding volume, selling prices, margins, expense levels and industry cyclicality. If we are unable to generate sufficient future taxable income in certain tax jurisdictions, we may be required to record additional valuation allowances against our deferred tax assets related to those jurisdictions.

The Company’s income tax provisions are based on calculations and assumptions that are subject to examination by the IRS and other tax authorities. Although the Company believes that the positions taken on filed tax returns are reasonable, it has established tax and interest reserves in recognition that various taxing authorities may challenge the positions taken. For uncertain tax positions, the Company applies the provisions of relevant authoritative guidance, which requires application of a “more likely than not” threshold to the recognition and derecognition of tax positions. The Company’s ongoing assessments of the more likely than not outcomes of tax authority examinations and related tax positions require significant judgment and can increase or decrease the Company’s effective tax rate.

39

Table of Contents

Long-lived Assets and Other Intangible Assets: Long-lived assets held and used are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. We estimate the future cash flows expected to result from the use of the asset and its eventual disposition. If the sum of the expected future cash flows (undiscounted and without interest charges) is less than the carrying amount of the asset, an impairment is recognized. Determining whether an impairment has occurred typically requires various estimates and assumptions, including determining which undiscounted cash flows are directly related to the potentially impaired asset, the useful life over which cash flows will occur, their amount, and the asset’s residual value, if any. Any related impairment loss is calculated based upon comparison of the fair value to the carrying value of the asset. Separate intangible assets that have finite useful lives are amortized over their useful lives. An impaired long-lived or intangible asset would be written down to fair value, based on various available valuation techniques, including the discounted cash flow method.

Goodwill: We assess the recoverability of the carrying value of recorded goodwill annually in the fourth quarter of each year or whenever indicators of potential impairment exist. We test for impairment of goodwill by assessing various qualitative factors with respect to developments in our business and the overall economy and calculating the fair value of a reporting unit using the discounted cash flow method, as necessary. Factors that may be considered indicators of impairment include: deterioration in general economic conditions; declines in the market conditions of our products, including metals prices; a sustained significant decline in our share price and market capitalization; reduced future cash flow estimates; and slower growth rates in our industry, among others. If we determine that it is more likely than not that the fair value of a reporting unit is less than the carrying value based on our qualitative assessment, we will proceed to the two-step goodwill impairment test. In step one, we compare the fair value of the reporting unit in which goodwill resides to its carrying value. If the carrying amount exceeds the fair value, the second step of the goodwill impairment test is performed to measure the amount of the impairment loss, if any. In the second step, the implied fair value of the goodwill is estimated as the fair value of the reporting unit used in the first step less the fair value of all other net tangible and intangible assets of the reporting unit. If the carrying amount of goodwill exceeds its implied fair value, an impairment loss is recognized in an amount equal to that excess, not to exceed the carrying amount of the goodwill. The fair value of the reporting units are estimated using an average of an income approach and a market approach as this combination is deemed to be the most indicative of our fair value in an orderly transaction between market participants. An income approach based on discounted future cash flows requires us to estimate income from operations based on projected results and discount rates based on a weighted average cost of capital of comparable companies. A market approach estimates fair value using market multiples of various financial measures of comparable public companies. If these estimates or their related assumptions for commodity prices and demand change in the future, we may be required to record impairment charges for these assets.

Based on the impairment test performed on October 1, 2014, the Company concluded that the fair value of the reporting unit tested for impairment exceeded the carrying value. The discount rate for the reporting unit was estimated to be 13% at October 1, 2014. The Company determines a discount rate based on an estimate of a reasonable risk-adjusted return an investor would expect to realize on an investment in the reporting unit. The reporting unit’s fair value exceeded its carrying value by more than 25%. Deterioration in market conditions in our industry or products, changes in expected future cash flows, expected growth rates or to discount rates could result in impairment charges in future periods.

Purchase Price Accounting: Business combinations are accounted for using the acquisition method of accounting. This method requires the Company to record assets and liabilities of the business acquired at their estimated fair market values as of the acquisition date. Any excess of the cost of the acquisition over the fair value of the net assets acquired is recorded as goodwill. The Company uses valuation specialists, where necessary, to perform appraisals and assist in the determination of the fair values of the assets acquired and liabilities assumed. These valuations require management to make estimates and assumptions that are critical in determining the fair values of the assets and liabilities.

Pension and postretirement benefit plan assumptions: We sponsor various benefit plans covering a portion of our employees for pension and postretirement medical costs. Statistical methods are used to anticipate future events when calculating expenses and liabilities related to the plans. The statistical methods include assumptions about, among other things, the discount rate, expected return on plan assets, rate of increase of health care costs and the rate of future compensation increases. Our actuarial consultants also use subjective factors such as withdrawal and mortality rates when estimating expenses and liabilities. The discount rate used for U.S. plans reflects the market rate for high-quality fixed-income investments on our annual measurement date (December 31) and is subject to change each year. The discount rate was determined by matching, on an approximate basis, the coupons and maturities for a portfolio of corporate bonds (rated Aa or better by Moody’s Investor Services or AA or better by Standard and Poor’s) to the expected plan benefit payments defined by the projected benefit obligation. The discount rates used for plans outside the U.S. are based on a combination of relevant indices regarding corporate and government securities, the duration of the liability and appropriate judgment.

40

Table of Contents

When calculating pension expense for 2014, we assumed the pension plans’ assets would generate a long-term rate of return of 8.00% and 6.50% for the U.S. and Canadian plans, respectively. The expected long-term rate of return assumption was developed based on historical experience and input from the trustee managing the plans’ assets. The expected long-term rate of return on plan assets is based on a target allocation of assets, which is based on a goal of earning the highest rate of return while maintaining risk at acceptable levels. Our projected long-term rate of return for the U.S. pension plan is slightly higher than some market indices due to the active management of our plans’ assets, and is supported by the historical returns on our plans’ assets. The plans strive to have assets sufficiently diversified so that adverse or unexpected results from one security class will not have an unduly detrimental impact on the entire portfolio. We regularly review actual asset allocation and the pension plans’ investments are periodically rebalanced to the targeted allocation when considered appropriate. Pension expense increases as the expected rate of return on plan assets decreases. Lowering the expected long-term rate of return on plan assets by 50 basis points would have increased 2014 pension expense by approximately $3 million.

Future pension obligations for the U.S. and Canadian plans were discounted using a weighted average rate of 4.05% and 3.80% at December 31, 2014, respectively. Lowering the discount rate by 50 basis points would increase the pension liability at December 31, 2014 by approximately $60 million.

The calculation of other postretirement benefit expense and obligations requires the use of a number of assumptions, including the assumed discount rate for measuring future payment obligations and the health care cost trend rate. A one percentage point increase (decrease) in assumed health care trend rates would increase (decrease) our total service and interest cost for the year ended December 31, 2014 by $0.2 million and $(0.2) million, respectively. A decrease in the weighted average discount rate of 50 basis points would increase the postretirement benefit liability by approximately $5 million.

The assumptions used in the actuarial calculation of expenses and liabilities may differ materially from actual results due to changing market and economic conditions, higher or lower withdrawal rates or longer or shorter life spans of participants. These differences may result in a significant impact on the amount of pension or postretirement benefit expense we may record in the future.

Legal contingencies: We are involved in a number of legal and regulatory matters including those discussed in Note 11 in the Consolidated Financial Statements. We determine whether an estimated loss from a loss contingency should be accrued by assessing whether a loss is deemed probable and can be reasonably estimated. We analyze our legal matters based on available information to assess potential liability. We consult with outside counsel involved in our legal matters when analyzing potential outcomes. We cannot determine at this time whether any potential liability related to this litigation would materially affect our financial position, results of operations or cash flows.

Recent Accounting Pronouncements

Recent accounting pronouncements are discussed within Note 1 in the Consolidated Financial Statements.

Interest rate risk

We are exposed to market risk related to our fixed-rate and variable-rate long-term debt. Market risk is the potential loss arising from adverse changes in market rates and prices, such as interest rates. Changes in interest rates may affect the market value of our fixed-rate debt. The estimated fair value of our long-term debt and the current portions thereof using quoted market prices of Company debt securities recently traded and market-based prices of similar securities for those securities not recently traded was $1,289 million at December 31, 2014 and $1,349 million at December 31, 2013 as compared with the carrying value of $1,259 million and $1,295 million at December 31, 2014 and 2013, respectively.

A hypothetical 1% increase in interest rates on variable rate debt would have increased interest expense in 2014 by approximately $3.7 million.

41

Table of Contents

Foreign exchange rate risk

We are subject to exposure from fluctuations in foreign currencies. We use foreign currency exchange contracts to hedge our Canadian subsidiaries’ variability in cash flows from the forecasted payment of currencies other than the functional currency. The Canadian subsidiaries’ foreign currency contracts were principally used to purchase U.S. dollars. We had foreign currency contracts with a U.S. dollar notional amount of $3.2 million outstanding at December 31, 2014 and a value of zero. We do not currently account for these contracts as hedges but rather mark these contracts to market with a corresponding offset to current earnings. For the year ended December 31, 2014, the Company recognized a gain less than $0.1 million associated with its foreign currency contracts. A hypothetical strengthening or weakening of 10% in the foreign exchange rates underlying the foreign currency contracts from the market rate as of December 31, 2014 would not have a material effect to the financial statements.

The currency effects of translating the financial statements of our foreign subsidiaries are included in accumulated other comprehensive loss and will not be recognized in the statement of operations until there is a liquidation or sale of those foreign subsidiaries.

Commodity price risk

Metal prices can fluctuate significantly due to several factors including changes in foreign and domestic production capacity, raw material availability, metals consumption and foreign currency rates. Declining metal prices could reduce our revenues, gross profit and net income. From time to time, we may enter into fixed price sales contracts with our customers for certain of our inventory components. We may enter into metal commodity futures and options contracts to reduce volatility in the price of these metals.

As of December 31, 2014, we had 144 tons of nickel futures or option contracts, 14,700 tons of hot roll coil swaps and 6,366 tons of aluminum price swaps outstanding with a liability value of zero, a net liability value of $0.5 million and a net liability value of $ 0.5 million, respectively. We do not currently account for these contracts as hedges, but rather mark these contracts to market with a corresponding offset to current earnings. For the year ended December 31, 2014, the Company recognized a loss of $0.5 million associated with its metal commodity derivatives.

As of December 31, 2014, we had diesel fuel price swaps with respect to the purchase of 624,000 gallons of diesel fuel in order to fix the prices at which we purchase that volume of fuel for our trucking fleet. We do not currently account for these contracts as hedges, but rather mark these contracts to market with a corresponding offset to current earnings. As of December 31, 2014, our diesel fuel hedges outstanding had a liability value of $0.2 million. For the year ended December 31, 2014, the Company recognized a loss of $0.2 million associated with its diesel fuel commodity derivatives.

A hypothetical strengthening or weakening of 10% in the commodity prices underlying the commodity derivative contracts from the market rate as of December 31, 2014 would increase or decrease the fair value of the commodity derivative contracts by $2.4 million.

42

Table of Contents

Index to Consolidated Financial Statements

43

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Stockholders of Ryerson Holding Corporation

We have audited the accompanying consolidated balance sheets of Ryerson Holding Corporation and Subsidiary Companies (“the Company”) as of December 31, 2014 and 2013 and the related consolidated statements of operations, comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2014. Our audits also included the financial statement schedules listed in the index to the consolidated financial statements. These financial statements and schedules are the responsibility of management of the Company. Our responsibility is to express an opinion on these financial statements and schedules based on our audits.

We conducted our audits in accordance with the standards of the Public Company Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Company’s internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of the Company at December 31, 2014 and 2013, and the consolidated results of its operations and its cash flows, for each of the three years ended December 31, 2014 in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedules, when considered in relation to the basic financial statements taken as a whole, present fairly, in all material respects, the information set forth therein.

44

Table of Contents

RYERSON HOLDING CORPORATION AND SUBSIDIARY COMPANIES

CONSOLIDATED STATEMENTS OF OPERATIONS

(In millions, except per share data)

See Notes to Consolidated Financial Statements

45

Table of Contents

RYERSON HOLDING CORPORATION AND SUBSIDIARY COMPANIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(In millions)

See Notes to Consolidated Financial Statements

46

Table of Contents

RYERSON HOLDING CORPORATION AND SUBSIDIARY COMPANIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In millions)