SCHMITT INDUSTRIES INC - Annual Report: 2009 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended: May 31, 2009

or

For the transition period from              to             

Commission File Number: 000-23996

SCHMITT INDUSTRIES, INC.

(Exact name of registrant as specified in its charter)

2765 N.W. Nicolai Street

Portland, Oregon 97210

(Address of principal executive offices) (Zip Code)

(503) 227-7908

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its Corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  ¨    No  x

        The aggregate market value of the voting stock held by non-affiliates of the registrant as of November 28, 2008, the last business day of the registrant's most recently completed second fiscal quarter, was approximately $9,597,000 based upon the closing price of $4.60 reported for such date on the NASDAQ Capital Market. For purposes of this disclosure, shares of Common Stock held by persons who hold more than 10% of the outstanding shares of Common Stock and shares held by officers and directors of the registrant, have been excluded because such persons may be deemed to be affiliates. This determination is not necessarily conclusive for other purposes.

As of August 1, 2009, the registrant had 2,870,160 outstanding shares of Common Stock.

Documents Incorporated by Reference

Portions of the registrant’s definitive Proxy Statement for its 2009 Annual Meeting of Shareholders are incorporated by reference into Part III hereof.

PART I

Forward-Looking Statements

This Annual Report on Form 10-K (the “Report”), including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7, contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 regarding future events and the future results of Schmitt Industries, Inc. and its consolidated subsidiaries (the “Company”) that are based on management’s current expectations, estimates, projections and assumptions about the Company’s business. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “sees,” “estimates” and variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or forecasted in such forward-looking statements due to numerous factors, including, but not limited to, those discussed in the “Risk Factors” section in Item 1A, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 and elsewhere in this Report as well as those discussed from time to time in the Company’s other Securities and Exchange Commission filings and reports. In addition, such statements could be affected by general industry and market conditions. Such forward-looking statements speak only as of the date of this Report or, in the case of any document incorporated by reference, the date of that document, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this Report. If we update or correct one or more forward-looking statements, investors and others should not conclude that we will make additional updates or corrections with respect to other forward-looking statements.

Introduction

Schmitt Industries, Inc. (the Company), an Oregon corporation incorporated in 1993, designs, manufactures and markets computer-controlled vibration detection and balancing equipment (the Balancer Segment) primarily to the machine tool industry. Through its wholly owned subsidiary, Schmitt Measurement Systems, Inc. (SMS), an Oregon corporation, the Company designs, manufactures and markets precision laser-based surface measurement products for the disk drive, silicon wafer and optics industries; laser-based distance measurement products for a wide variety of industrial applications; and ultrasonic measurement products that accurately measure the fill levels of large liquefied propane tanks and transmit that data via satellite to a secure web site (the Measurement Segment). The Company also sells and markets its products in Europe through its wholly owned subsidiary, Schmitt Europe Ltd. (SEL), located in the United Kingdom. The Company’s executive offices are located at 2765 N.W. Nicolai Street, Portland, Oregon 97210, and its telephone number is (503) 227-7908.

Balancer Segment

The Company’s principal product line is the Schmitt Dynamic Balance System (the SBS System), consisting of a computerized control unit, vibration sensor, spindle-mounting adapter, and balance head. It is designed as an inexpensive yet highly accurate permanent installation on grinding machines. SBS products can detect and correct for vibration as small as 0.02 microns. The Company acquired its original balancing equipment technology pursuant to a series of agreements from 1987 through 1991, substantially enhancing and advancing the patented technology since that time. Since inception the targeted customer base has been manufacturers and operators of grinding machines for a variety of industries such as automotive, aerospace, medical and machine tools, where operating tolerances on manufactured parts are exceedingly precise.

The SBS System is fully automated, eliminating the need to pre-balance such devices as grinding wheels. This reduces machine setup time and ensures a smoother and more efficient operation. Operating on a principle of mass compensation for wheel imbalance, the balance head contains two movable eccentric weights, each driven by electric motors through a precision gear train. These weights are repositioned to offset any imbalance

2

in a grinding wheel or other application. Imbalance or vibration is picked up by the sensor that feeds a signal to a controller that filters the signal by revolutions per minute. The controller then automatically drives the balance head weights in a direction that reduces the amplitude of the vibration signal. The balance cycle is complete when the weights are positioned to achieve the lowest vibration level.

The SBS System also includes an optional Acoustical Emission Monitoring System (AEMS), which uses proprietary acoustic sensor technology to monitor the very high frequency signals generated on the grinding machine during key events in the grinding process. The AEMS system allows rapid, automatic grinding wheel in-feed, right up to the point of initial contact with a new part loaded in the machine. The system can automatically detect the initial contact and very quickly report this event to the machine control, stopping the wheel in-feed without operator intervention. Part crash occurs when a part or fixture is incorrectly loaded into a grinding machine or some abnormal condition occurs. Rapid in-feed of the wheel may then result in a dangerous or expensive crash. The AEMS system allows the CNC control to monitor the acoustic levels on the machine and detect any unexpected contact when it happens. The system then reports that abnormal contact and instructs the CNC program to stop the grinding process, usually within one millisecond.

Notable features of the SBS System include its ability to fit almost all machines, ease of installation, compact and modular construction, ability to balance a wheel while on a machine, virtual elimination of wheel vibration, automatic monitoring of balancing, display in both English and metric systems, instrument grade calibration, short balance process, measurement of both displacement and/or velocity and minimal user maintenance.

Benefits of using the SBS system include improved quality of finished parts, elimination of grinding gap time in the grind cycle resulting in increased efficiency and part throughput, ease of product adaptation, monitoring and correction of part crash, minimal downtime, complete and ready installation, elimination of static balancing, longer life of the grinding wheel, diamond dressings and spindle bearings, the ability to balance within 0.02 microns and its adaptability to all types of machines.

Precision grinding is necessary in major manufacturing areas including the automotive industry (camshafts, crankshafts, valves), bearings (roller and tapered types), ceramics (precision shaping), electric motors (shafts), pumps (shafts and turbines), aircraft (engine parts), and general manufacturing. Precision grinding has an established worldwide presence in all industrialized countries and is expanding as a method of material removal and processing. Within the Company’s customer base for the SBS System, there are three major market segments:

Machine Tool Builders—These companies design and manufacture a variety of cylindrical, surface and specialty application grinding machines. SBS Systems are distributed to a variety of markets throughout the world through original equipment manufacturers (OEMs), who incorporate the SBS System into their products.

Examples of some well-known worldwide machine tool builders who have offered and/or installed the SBS System include Shanghai Machine Tool Works (China), ANCA (Australia), Capco Machinery (U.S.), Ecotech/SMTW (China/U.S.), Erwin Junker (U.S.), Shaanxi Qinchuan Machinery Development Co. (China), Cinetic Landis Grinding (U.S.), Koyo Machinery (US, Japan), Micron Machinery Limited (Japan/U.S.), USACH Technologies, Tschudin (U.S.) and Weldon Machine Tool (U.S.). The Company currently sells its products directly to major machine builders throughout the world.

Machine Tool Rebuilders—These customers, found in most, if not all, industrialized nations, develop their business by offering to completely update and refurbish older grinding machines. These rebuilders typically tear the old machine apart and install new components, such as the SBS System. The Company currently sells its products directly to major machine rebuilders throughout the world.

Grinding Machine Users—These end users become aware of the SBS System through trade shows, trade magazine advertising, distributors, field representatives, referrals and new machine suppliers. The Company’s business is conducted worldwide with some better known customers including: Black &

3

Decker, Briggs and Stratton, Caterpillar, Eaton, Emerson Power Transmission, Cummins Engine, Ford Motor Company, General Electric, General Motors, Ingersoll Rand, Komatsu, Sumitomo Heavy Industries, SKF Bearing Industries, Timken, TRW Automotive Components and Universal Bearing.

For the years ended May 31, 2009, May 31, 2008 and May 31, 2007 (Fiscal 2009, 2008 and 2007), net sales of the Company’s balancing products totaled $7.0 million, $8.4 million and $7.9 million, respectively. Net sales of balancing products accounted for 73%, 74% and 67% of the Company’s total sales in Fiscal 2009, 2008 and 2007, respectively. See Note 6 to Consolidated Financial Statements.

Competition

Management believes the SBS System is one of only a few fully automatic balancing systems marketed in the world. Most competitive products require special setup and training or calibration to the specific machine. The Company believes the SBS System is currently one of the few products that can fit all machines with wheel sizes from 6 to 48 inches in diameter and spindle speeds of 500 through 12,500 rpm.

Competitive products come from European companies located in Switzerland, Germany, Spain and Italy. These competitors produce electromechanical and water balancers similar to the SBS System. The Company considers these companies, with their established European base, to be the major competitors. Competitors include Marposs S.p.A., Dittel Messtechnik GmbH, MPM Micro Prazision Marx GmbH and Balance Systems S.r.l.

Water balancers (hydrokompensers) are an older European design still on the market that can be supplied by the Company when specifically requested by users. They require plumbing and water chambers to be machined into the wheel hub. To install these systems, the grinding machines must be disassembled and parts remachined or replaced within the spindle assembly. The water system is “tuned” or “calibrated” to the machine by a factory service technician and are suitable for mid and high speed spindle environments.

Pricing of the SBS system is geared toward maintaining the status of the SBS system as the premier product in the industry, offering best quality, reliability and performance and superior economic value.

Measurement Segment

Within the Measurement segment, the Company designs, manufactures and markets several laser-based precision test and measurement products and an ultrasonic product for measuring the fill levels of large liquid propane tanks and operates a precision laser light scatter measurement laboratory.

There are five specific product lines: laser-based surface roughness measurement, laser-based distance measurement and dimensional sizing, remote tank monitoring, laser light-scatter and a laser light-scatter measurement laboratory.

Surface Roughness Measurement Products

These products use a patented laser light scatter technology to perform rapid, accurate, repeatable, non-destructive and non-contact surface measurement tests that quantify surface micro-roughness. The technology is extremely precise, measuring surface roughness at the molecular (Angstrom) level. Products are sold to manufacturers of hard disk drives, silicon wafers and optical products and industries with fabrication processes that require precise and reliable measurements.

Computer hard disk drives require exact manufacturing control and a narrow tolerance band for acceptable roughness, with surface roughness outside that narrow band resulting in a reduction in data density or storage capacity. The Company’s technology simultaneously measures disk surface roughness in two directions, radially, when the read/write head is moving to another disk sector, and circumferentially, when the read/write head is processing information on the disk. The two separate roughness levels are required for proper head operation. The Company believes the precise measurement methods provided by its products are not possible through any other cost effective measurement means.

4

The following two products meet the challenges of disk drive manufacturers:

Customers include Hitachi/IBM, Seagate Substrates, Western Digital and Komag, Inc.

The Company offers two products devoted to the silicon wafer industry, the TMS-2000W-RC and TMS-3000W-RC. Both products provide fast, accurate, repeatable measurements for manufacturers of silicon wafers, computer chips and memory devices. This industry demands manufacturing precision to increase performance and capacity and these products help achieve those goals. Silicon wafers are carefully cut and polished to provide the base upon which a computer or memory chip is produced. Therefore, chip manufacturing is extremely dependent on the beginning surface roughness of the wafer. Since all silicon wafers exhibit a microscopic level of surface roughness, stemming from chemical deposition, grinding, polishing, etching, or any number of other production techniques, some method of measuring these surface characteristics is required. The Company’s wafer measurement products provide a way for customers in this industry to quantify and control their manufacturing process. The system provides measurements to less than 0.5 Angstroms, a level unachievable by competing devices.

Distance Measurement and Dimensional Sizing Products

These laser-based products, utilizing both triangulation and time-of-flight methods of measurement, are used in a wide range of industrial applications including manufacturing, lumber production, steel casting, glass and paper production, medical imaging, crane control and micron-level part and surface inspection. Presently, there are six AccuRange (AR) product lines: the AR1000, AR3000 and AR4000 distance measurement sensors, the AR4000 Line Scanner and the AR700 and AR200 series of triangulating laser displacement sensors.

The AR4000 optical distance measurement sensor is used for most diffuse reflective surfaces, but is ideally suited to level and position measurement, machine vision, autonomous vehicle navigation and 3D imaging applications. It operates by emitting a collimated laser beam that is reflected from the target surface and collected by a sensor. The sensor is suitable for a wide variety of distance measurement applications that demand high accuracy and fast response times. Notable features include the operating range for most surfaces (zero to fifty-two feet), fast response time (50 kHz maximum sample rate), compact and lightweight power design and has a tightly collimated output beam for small spot size. There are three output beam configurations available: visible infrared, eye safe infrared and reflective tape targets.

The AR1000 and AR3000 distance measurement lasers utilize pulsed time of flight measurement principles to accurately measure distances of up to 30 meters (up to 300 meters with retro reflective tape) with the AR1000 and up to 300 meters (3000 meters with retro reflective tape) with the AR3000. Both products are highly versatile, able to measure distances both indoors and outdoors. Applications include load confirmation, lumber positioning, crane monitoring, fill level measurement, velocity measurement and laser altimeter.

The AR4000 Line Scanner is used with the AR4000 to scan and collect distance data over a full circle. The scanner consists of a balanced, rotating mirror and motor with position encoder and mounting hardware for use

5

with the AR4000. The scanner deflects the beam 90 degrees, sweeping it through a full circle as it rotates. The product can scan at rates of up to 2600 lines per minute, sweeps the laser beam through a full 360 degrees and is both compact and lightweight.

The AR700 is a new series of triangulation laser displacement sensors that provides superior performance in terms of accuracy, repeatability, and sample speed. The AR700 boasts output speeds up to 9400 Hz and resolutions as low as one sixth of a micrometer. The laser will output 9400 distance readings in a single second. The unit is also very compact, measuring approximately 80% smaller than its predecessor, the AR600. Model variations permit applications up to 50 inches in range. Applications include high speed road profiling, product dimensional or thickness measurement, rubber thickness measurement, lumber or plywood thickness measurement, carton dimensioning and product positioning.

The AR200 line is the Company’s most compact series of triangulating laser displacement sensors. Four models cover metric measurement ranges from six to fifty millimeters. All models boast a 1/500 accuracy rating for measurements within twelve microns. The AR200 sensor is the only sensor of its kind to feature pushbutton selection of output signals. All models are standard with analog, limit switch and serial outputs. The AR200 sensors, much like the longer-range AR700 sensors, project a beam of visible laser light that creates a spot on the target surface. Reflected light from the surface is viewed from an angle by a line scan camera and the target’s distance is computed from the image pixel data. The AR200-6M, -12M, -25M and -50M have ranges in millimeters that match their model number. The AR200 displacement sensor cannot be overloaded and measures accurately even when a mirror reflects the entire light beam back to the detector.

Remote Tank Monitoring Products

The Company’s primary product for this new market is called Xact™. The Xact product utilizes ultrasonic technology to detect and measure the capacity and volume of large chemical storage tanks, such as liquid propane tanks. Each sensor, which is affixed to the exterior of the underside of each tank, produces a small electrical pulse, or a “ping,” through the tank’s steel shell, which is reflected off the bottom surface of the liquid stored in the tank in the form of an echo that is detected. The time of flight between the “ping” and the echo is then calculated to determine, based upon additional data regarding tank size and shape, the volume of liquid the tank contains. This information is then remotely transmitted via a satellite transceiver that is affixed to the top of the tank to a secure website on the internet, processed using proprietary software and displayed on that website. Each tank can be remotely monitored simultaneously anywhere in the world. The user has the ability to individually set the time the volume of each tank is to be measured simply by adjusting the settings for each tank as provided on the website. Initial sales of the Xact product are expected to occur during the first quarter of Fiscal 2010.

Research and Other Measurement Products

The Company’s CASI Scatterometers are sold to companies and institutions involved in research efforts. The CASI Scatterometer uses visible, ultraviolet or infrared laser light as a nondestructive probe to measure surface quality, optical performance, smoothness, appearance, defects and contamination on a wide variety of materials. These products are scientific measurement instruments providing customers with molecular-level precision in roughness measurement of optical surfaces, diffuse materials, semiconductor wafers, magnetic storage media and precision-machined surfaces, as well as surfaces affecting the cosmetic appearance of consumer products.

The µScan System is a portable device consisting of a hand-held control unit, an interchangeable measurement head and a separate charging unit. To perform a measurement, the operator places the measurement head on the objective area and presses a button. Each measurement takes less than five seconds with results displayed and stored in system memory. The µScan can store 700 measurements in 255 files and provides the capability to program pass/fail criteria. Software is available for control, analysis and file conversion. From a single measurement, a user can determine RMS surface roughness, reflectance and scatter light levels (BRDF) on flat or curved surfaces under any lighting conditions.

6

Light-Scatter Measurement Laboratory

The Company provides a highly advanced measurement services laboratory, using CASI Scatterometers, to a wide variety of industrial and commercial businesses that require precise measurements only advanced laser light scatter technology can provide. The value of the laboratory is not only its extremely precise measurement capability but also the test item is not altered, touched or destroyed. Thus, the laboratory is widely used by manufacturers of critical optical components in aerospace and defense systems and other industrial companies, universities and government agencies.

In Fiscal 2009, 2008 and 2007, net sales of Measurement products totaled $2.5 million, $3.0 million and $4.0 million, respectively, and accounted for 27%, 26%, and 33% of the Company’s total sales in Fiscal 2009, 2008 and 2007, respectively. See Note 6 to Consolidated Financial Statements.

Competition

Management believes its surface measurement products are one of only a few systems that provide fast, accurate, repeatable microroughness measurements for computer hard disk manufacturers and the silicon wafer industry. The Company believes its surface measurement products are currently the only systems that can provide measurements to a few hundredths of an angstrom (Å-a unit of measure equal to 1 hundred-millionth of a centimeter) with reproducibility +/- 0.2Å or 1% and repeatability of +/-0.1Å. There are differences between our surface measurement products and other optical techniques (which include profilometers, scanning tunneling microscopes, atomic force microscopes or interferometers). These other technologies require the intervention of a skilled operator and perform measurements relatively slowly, whereas our surface measurement product is much simpler and, consequently, can make measurements more rapidly while still maintaining excellent repeatability and accuracy. Stylus profilometers are simpler devices which require less skilled operators. However, measurements must be conducted under vibration isolation conditions, and large areas require numerous scans; thus, stylus profilometers are generally destructive to soft materials such as most coated optics.

The market for distance measurement and dimensional sizing products is extremely competitive, characterized by rapidly changing technology. The Company believes the principal elements of competition include quality of ongoing technical support and maintenance coupled with responsiveness to customer needs, as well as price, product quality, reliability and performance. The differences between the Company’s sensors and competitive products include pushbutton selection of output signals in certain models and sensors that can be programmed using serial commands through a PC computer. The AR200 displacement sensor cannot be overloaded and measures accurately even when a mirror reflects the entire light beam back to the detector.

Competitive surface measurement products and dimensional sizing products come from established multinational competitors, some of which are significantly larger and have greater financial, engineering, manufacturing and marketing resources. Company pricing is geared to obtaining market share and meeting competitive supplier prices. The market strategy is to establish measurement products as products with the best quality, reliability and performance and superior economic value.

Sales by Geographic Area

In Fiscal 2009, 2008 and 2007, the Company recorded net sales of its products in the United States, its country of domicile, of $4.8 million, $6.0 million and $5.9 million, respectively. Net sales in the last three fiscal years by geographic areas are:

7

Business and Marketing Strategy

The Company designs, manufactures and markets all of its products with operations divided into a number of different areas.

Balancer Segment Products

The Company markets and sells the Balancer segment products in a variety of ways. First are the channels provided by independent manufacturers’ representatives and distributors. There are currently approximately 100 individuals and/or organizations throughout the world acting in one of these capacities, including approximately 25 in the United States and 30 in China.

Second, OEMs incorporate the Balancer segment products on the machine tools they produce. Users thus purchase the Balancer segment products concurrently with the machine tools. Conversely, end users of grinding machines that have purchased the SBS system directly from the Company, and after enjoying the benefits of the products, often request that SBS products be included with the new equipment they order from OEMs. The SBS Systems are often installed by machine builders prior to displaying their own machine tools at various trade shows, becoming endorsements that prove beneficial to the Company’s sales efforts.

Third, worldwide trade shows have proven to be an excellent source of business. Company representatives, usually one or more of the marketing managers and the CEO or President, attend these events along with local Company representatives. These individuals operate a display booth featuring an SBS System demonstration stand and product and technical literature. Representatives from all facets of the Company’s target markets attend these trade shows.

In North America and Asia, products are shipped directly to customers from the Company’s distribution center in Portland, Oregon. Where the Company has distributors, the product is shipped to the distributor, who in turn pays the Company directly and then delivers and installs the product for the end user. European distribution to customers is handled by shipping the product directly from the Company’s Portland headquarters to the European subsidiary in the United Kingdom, who in turn sells and distributes the products.

Measurement Segment Products

Similar to the Balancer segment, the Measurement segment uses a variety of methods to market and sell its products. First, a Marketing Manager directs the overall worldwide marketing efforts for surface measurement products. Second, both a marketing and a sales manager, direct the overall worldwide marketing and sales efforts for distance measurement and dimensional sizing products. Third, the Company has an exclusive distribution agreement with a company in Asia for the promotion and sale of surface measurement products in China, Taiwan, Malaysia, Singapore, Thailand and the Philippines. In addition, there are distribution agreements with one company in Japan and two in Korea. Trade shows also represent a significant amount of marketing/sales effort. Company representatives operate a display booth featuring demonstrations of Measurement segment products along with product and technical literature. Representatives from all facets of the market to which the Company directs its sales efforts attend these trade shows. Finally, one of the best marketing channels is the testing laboratory. Once customers see the capabilities of the technology, it can lead to orders for the Company’s laser based light scatter measurement products.

All Measurement segment products are assembled in the Portland, Oregon facility and shipped worldwide directly to customers. The Balancer and Measurement segment customer bases each consist of over 250 companies.

Backlog

The Company does not generally track backlog. Normally, orders are shipped within a few days after receipt unless the customer requests otherwise.

8

Manufacturing

There are no unique sources of supply or raw materials in any product lines. Essential electronic components, available in large quantities from various suppliers, are assembled into the Balancing and Measurement electronic control units under the Company’s quality and assembly standards. Company-owned software and firmware are coupled with the electronic components to provide the basis of the Company’s various electronic control units. Management believes several supply sources exist for all electronic components and assembly work incorporated into its electronic control systems. The primary outside supplier of electronic assemblies is Silicon Forest Electronics of Vancouver, Washington, a custom supplier of assembled electronic products for several Pacific Northwest companies. In the event of supply problems, the Company believes that two or three alternatives could be developed within thirty days.

Mechanical parts for the Company’s products are produced by high quality machine shops. The Company is not dependent on any one supplier of mechanical components. Principal suppliers of components for the Company’s products include Eagle Industries of Newberg, Oregon; Asco Machine, Inc. of Vancouver, Washington; Davis Tool of Portland, Oregon; and Forest City Gear of Roscoe, Illinois.

The Company uses in-house skilled assemblers to construct and test vendor-supplied components. Component inventory of finished vendor-supplied parts is held on Company property to assure adequate flow of parts to meet customer order requirements. Inventory is monitored by a computer control system designed to assure timely re-ordering of components. In-house personnel assemble various products and test all finished components before placing them in the finished goods inventory. Finished goods inventory is maintained via computer to assure timely shipment and service to customers. All customer shipments are from the finished goods inventory.

The Company’s Quality Control Program first received full ISO 9001 certification in 1996. On November 4, 2005, the Company received its certification to the newer ISO 9001:2000 requirements and received its recertification in December 2008.

Proprietary Technology

The Company’s success depends in part on its proprietary technology, which the Company protects through patents, copyrights, trademarks, trade secrets and other measures. The Company has U.S. patents covering both Balancer and Measurement products, processes and methods that the Company believes provide it with a competitive advantage. The Company has a policy of seeking patents where appropriate on inventions concerning new products and improvements developed as part of its ongoing research, development and manufacturing activities. While patents provide certain legal rights of enforceability, there can be no assurance the historic legal standards surrounding questions of validity and enforceability will continue to be applied or that current defenses as to issued patents will, in fact, be considered substantial in the future. There can be no assurance as to the degree and range of protection any patent will afford and whether patents will be issued or the extent to which the Company may inadvertently infringe upon patents granted to others.

“SBS,” “SMS,” Acuity” and “Xact” are trademarks and are affixed to all products and literature created in the Company’s balancer, measurement and Xact product lines, respectively.

The Company manufactures its Balancer segment products under copyright protection in the U.S. for electronic board designs. Encapsulation of the finished product further protects the Company’s technologies including software.

The Company also relies upon trade secret protection for its confidential and proprietary information. There can be no assurance that others will not independently develop substantially equivalent proprietary information and techniques or otherwise gain access to the Company’s trade secrets or disclose such technology or that the Company can meaningfully protect its trade secrets.

9

While the Company pursues patent, trademark, trade secret and copyright protection for products and various marks, it also relies on know-how and continuing technology advancement, manufacturing capabilities, affordable high-quality products, new product introduction and direct marketing efforts to develop and maintain its competitive position.

Product Development

The Company maintains an ongoing research and development program to expand the product lines and capabilities of its business segments. The goal of this program is to expand the product base in historic markets and to enter new market areas so as to reduce reliance on historic market segments. In the past fiscal year, the Company has developed and introduced the AR700, a new series of triangulation laser displacement sensors intended to replace the existing line of AR600 sensors. The AR700 provides performance advanced over the AR600 in accuracy, repeatability, and sample speed.

During Fiscal 2009, 2008 and 2007, the Company’s research and development expense totaled $1.0 million, $628,000 and $88,000, respectively. The Fiscal 2009 increase in product development costs relates primarily to the acquisition of the Xact product technology and further development of that technology. We expect to start selling these new Xact products during the first quarter of Fiscal 2010.

Employees

As of August 1, 2009, the Company employed 41 individuals worldwide on a full-time basis. There were no regular part-time employees. None of the Company’s employees is covered by a collective bargaining agreement.

The following are important factors that could cause actual results or events to differ materially from those contained in any forward-looking statements made by or on behalf of the Company (see the forward-looking statements disclaimer at the beginning of Part 1, Item 1 in this Report). In addition, the risks and uncertainties described below are not the only ones that the Company faces. Unforeseen risks could arise and problems or issues that the Company now views as minor could become more significant. If the Company were unable to adequately respond to any risks, the Company’s business, financial condition or results of operations could be materially adversely affected. In addition, the Company cannot be certain that nay actions taken to reduce known risks and uncertainties will be effective.

The general economic conditions and the global financial crisis may adversely affect the Company’s business, operating results and financial condition

The Company’s operations and performance depend significantly on worldwide economic conditions, particularly in the manufacturing sector, and their impact on levels of capital investment, which have recently deteriorated significantly and may remain depressed, or be subject to further deterioration. Economic factors that could adversely influence demand for the Company’s products include uncertainty about global economic conditions leading to reduced levels of investment, customers’ and suppliers’ access to credit, unemployment and other macroeconomic factors affecting commercial and industrial spending behavior.

The recent distress in the financial markets and global economy has resulted in reduced liquidity and a tightening of credit markets. As a result of these conditions, the Company could experience several potential adverse effects, including the inability of customers to obtain credit to finance purchases of the Company’s products, the insolvency of customers resulting in reduced sales and bad debts, and the insolvency of key suppliers resulting in product development and production delays.

10

The Company’s primary markets are volatile and unpredictable

The Company’s business depends on the demand for our various products in a variety of commercial and industrial markets. In the past, demand for our products in these markets has fluctuated due to variety of factors, some of which are beyond our control, including: general economic conditions, both domestically and internationally, the timing, number and size of orders from, and shipments to, our customers as well as the relative mix of those orders and variations in the volume of orders for a particular product line in a particular quarter.

The introduction of the Xact^™ tank monitoring system may not become commercially viable and satisfy expected demand

On May 13, 2009, the Company announced the introduction of the Xact^™ tank monitoring system for measuring fill levels of industrial liquefied propane tanks and communicating that data via satellite to a secure web site. Although the initial acquisition and further development of the Xact^™ product has negatively impacted current operating results, the product should allow the Company to enter new measurement markets and is expected to add sales and profits to the Company in future years. However, the introduction of the Xact^™ product may not be successful, anticipated market demand for the product may not materialize and additional product or market opportunities may not be identified and developed and brought to market in a timely and cost-effective manner, each of which could continue to negatively impact future operating results and result in large and immediate write-offs of recorded intangible asset balances.

New products may not be developed to satisfy changes in consumer demands

The failure to develop new technologies, or react to changes in existing technologies, could materially delay development of new products, which could result in decreased revenues and a loss of market share to competitors. Financial performance depends on the ability to design, develop, manufacture, assemble, test, market and support new products and enhancements on a timely and cost-effective basis. New product opportunities may not be identified and developed and brought to market in a timely and cost-effective manner. Products or technologies developed by other companies may render products or technologies obsolete or noncompetitive, or a fundamental shift in technologies in the product markets could have a material adverse effect on the Company’s competitive position within historic industries.

Failure to protect intellectual property rights could adversely affect future performance and growth

Failure to protect existing intellectual property rights may result in the loss of valuable technologies or paying other companies for infringing on their intellectual property rights. The Company relies on patent, trade secret, trademark and copyright law to protect such technologies. There is no assurance any of the Company’s U.S. patents will not be invalidated, circumvented, challenged or licensed to other companies.

Competition is intense and the Company’s failure to compete effectively would adversely affect its business

Competition in the markets for the Company’s products is intense. The speed with which companies can identify new applications for the Company’s various technologies, develop products to meet those needs and supply commercial quantities at low prices to those new markets are important competitive factors. The principal competitive factor in the Company’s markets are product features, performance, reliability and price. Many of the Company’s competitors have greater financial, technical, research and development and marketing resources. No assurance can be given that the Company will be able to compete effectively in the future, and the failure to do so would have a material adverse effect on the Company’s business, financial condition and results of operations.

11

Production time and the overall cost of products could increase if any of the primary suppliers are lost or if a primary supplier increased the prices of raw materials

Manufacturing operations depend upon obtaining adequate supplies of raw materials on a timely basis. The results of operations could be adversely affected if adequate supplies of raw materials cannot be obtained in a timely manner or if the costs of raw materials increased significantly.

Fluctuations in quarterly and annual operating results make it difficult to predict future performance

Quarterly and annual operating results are likely to fluctuate in the future due to a variety of factors, some of which are beyond management’s control. As a result of quarterly operating fluctuations, it is important to realize quarter-to-quarter comparisons of operating results are not necessarily meaningful and should not be relied upon as indicators of future performance.

The Company may not be able to reduce operating costs quickly enough if sales decline

Operating expenses are generally fixed in nature and largely based on anticipated sales. However, should future sales decline significantly and rapidly, there is no guarantee management could take actions that would further reduce operating expenses in either a timely manner or without seriously impacting the operations of the Company.

The Company maintains a significant investment in inventories in anticipation of future sales

The Company believes it maintains a competitive advantage by shipping product to its customers more rapidly than its competitors. As a result, the Company has a significant investment in inventories. These inventories are recorded using the lower-of-cost or market method, which requires management to make certain estimates. Management evaluates the recorded inventory values based on customer demand, market trends and expected future sales and changes these estimates accordingly. A significant shortfall of sales may result in carrying higher levels of inventories of finished goods and raw materials thereby increasing the risk of inventory obsolescence and corresponding inventory write-downs. As a result, the Company may not carry adequate reserves to offset such write-downs.

Future success depends in part on attracting and retaining key management and qualified technical and sales personnel

Future success depends on the efforts and continued services of key management, technical and sales personnel. Significant competition exists for such personnel and there is no assurance key technical and sales personnel can be retained nor assurances there will be the ability to attract, assimilate and retain other highly qualified technical and sales personnel as required. There is also no guarantee key employees will not leave and subsequently compete against the Company. The inability to retain key personnel could adversely impact the business, financial condition and results of operations.

Changes in the effective tax rate may have an adverse effect on the Company’s results of operations

The Company’s future effective tax rate may be adversely affected by a number of factors including: the jurisdictions in which profits are determined to be earned and taxed; the resolution of issues arising from tax audits with various tax authorities; changes in the valuation of our deferred tax assets and liabilities; adjustments to estimated taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes; changes in available tax credits; changes in stock-based compensation expense; changes in tax laws or the interpretations of such tax laws and changes in generally accepted accounting principles.

Changes in securities laws and regulations have increased and will continue to increase Company expenses

Changes in the laws and regulations affecting public companies, including the provisions of the Sarbanes-Oxley Act of 2002 and rules promulgated by the Securities and Exchange Commission, have increased and will

12

continue to increase Company expenses as the Company devotes resources to ensure compliance with all applicable laws and regulations. In particular, the Company will incur significant additional administrative expense and a diversion of management’s time in Fiscal 2010 to implement Section 404 of the Sarbanes-Oxley Act which requires management to report on, and the Company’s independent registered public accounting firm to ultimately attest to, our internal control over financial reporting. The Company may also incur additional fees necessary for them to provide their attestation. In addition, the NASDAQ Capital Market, on which the Company’s common stock is listed, has also adopted comprehensive rules and regulations relating to corporate governance. These laws, rules and regulations have increased the scope, complexity and cost of corporate governance, reporting and disclosure practices. The Company may be required to hire additional personnel and use outside legal, accounting and advisory services to address these laws, rules and regulations. The Company also expects these developments to make it more difficult and more expensive for the Company to obtain director and officer liability insurance in the future, and the Company may be required to accept reduce coverage or incur substantially higher costs to obtain coverage. Further, Company board members, Chief Executive Officer and Chief Financial Officer could face an increased risk of personal liability in connection with the performance of their duties. As a result, we may have difficulty attracting and retaining qualified board members and executive officers, which would adversely affect the Company.

The Company faces risks from international sales and currency fluctuations

The Company markets and sells its products worldwide and international sales have accounted for and are expected to continue to account for a significant portion of future revenue. International sales are subject to a number of risks, including: the imposition of governmental controls; trade restrictions; difficulty in collecting receivables; changes in tariffs and taxes; difficulties in staffing and managing international operations; political and economic instability; general economic conditions; and fluctuations in foreign currencies. No assurances can be given these factors will not have a material adverse effect on future international sales and operations and, consequently, on business, financial condition and results of operations.

None.

The Company’s design and assembly facilities and executive offices are located in Portland, Oregon in three company-owned buildings totaling approximately 40,500 square feet. SEL occupies a 755-square foot facility in Coventry, England pursuant to a two year lease beginning May 7, 2009 with a basic monthly rent of £975 (approximately $1,575 as of May 31, 2009).

There are no material legal proceedings currently pending against the Company.

No matters were submitted to a vote of the security holders of the Company during the fourth quarter ended May 31, 2009.

13

PART II

The Company’s Common Stock is traded on the NASDAQ Capital Market under the symbol “SMIT.”

The following tables set forth the high and low sales prices of the Company’s Common Stock as reported on the NASDAQ Capital Market for the periods indicated.

As of August 1, 2009, there were 2,870,160 shares of Common Stock outstanding held by approximately 175 holders of record. The number of holders does not include individual participants in security position listings; the Company believes that there are more than 1,750 individual holders of shares of Common Stock.

The Company has not paid any dividends on its Common Stock since 1994. The Company’s current policy is to retain earnings to finance the Company’s business. Future dividends will be dependent upon the Company’s financial condition, results of operations, current and anticipated cash requirements, acquisition plans and plans for expansion and any other factors that the Company’s Board of Directors deems relevant. The Company has no present intention of paying dividends on its Common Stock in the foreseeable future.

This table shows information about equity awards under the Company’s equity compensation plans at May 31, 2009:

Issuer Purchases of Equity Securities

None.

14

In thousands, except per share information

Year Ended

15

RESULTS OF OPERATIONS

Overview

Schmitt Industries, Inc. designs, manufactures and markets computer controlled vibration detection and balancing equipment (the Balancer segment) to the worldwide machine tool industry and, through its wholly owned subsidiary, Schmitt Measurement Systems, Inc., precision laser-based surface measurement products, laser-based distance measurement products and ultrasonic measurement systems (the Measurement segment) for a variety of industrial applications worldwide. The Company sells and markets its products in Europe through its wholly owned subsidiary, Schmitt Europe Ltd. (SEL) located in the United Kingdom. The Company is organized into two operating segments: the Balancer segment and the Measurement segment.

For the year ended May 31, 2009 (Fiscal 2009), total sales decreased $1.9 million or 16.8% to $9.5 million from $11.4 million in the year ended May 31, 2008 (Fiscal 2008). Balancer segment sales focus throughout the world on end-users, rebuilders and original equipment manufacturers of grinding machines with the target geographic markets in North America, Asia and Europe. Balancer sales decreased $1.4 million or 17.2% to $7.0 million in Fiscal 2009 compared to $8.4 million in Fiscal 2008. The Fiscal 2009 decrease in worldwide balancer sales is due to lower volumes of shipments as the worldwide automotive industry has been severely impacted by the global economic downturn. The Measurement segment product line consists of both laser-based light-scatter and distance measurement and dimensional sizing products. Total Measurement sales decreased $477,000 or 15.9% to $2.5 million in Fiscal 2009 compared to $3.0 million in Fiscal 2008. The decrease is primarily due to the lower volumes of shipments of surface measurement products to disk drive and silicon wafer manufacturers.

During the third quarter of Fiscal 2008, the Company completed its acquisition of Xtero Datacom, Inc. (Xtero). The Company acquired Xtero’s business including its patented technologies that utilize ultrasonic measurement systems to remotely measure and report via satellite to a secure website the capacity and volumes of large chemical storage tanks anywhere in the world. This acquisition partially resulted in higher research and development costs of $391,000 during Fiscal 2009. These higher expenses negatively impacted operating results during Fiscal 2009.

Net loss was $2.2 million or $0.75 per fully diluted share for the year ended May 31, 2009 as compared to net income of $1.1 million or $0.39 per fully diluted share for the year ended May 31, 2008. Earnings per share for Fiscal 2009 as compared to the prior year were also negatively impacted due to the issuance of 200,000 shares of common stock used in connection with the acquisition of Xtero during the third quarter of Fiscal 2008.

Critical Accounting Policies

Revenue Recognition—The Company recognizes revenue for sales and billing for freight charges upon delivery of the product to the customer at a fixed or determinable price with a reasonable assurance of collection, passage of title to the customer as indicated by shipping terms and fulfillment of all significant obligations, pursuant to the guidance provided by Staff Accounting Bulletin No. 104, “Revenue Recognition,” issued by the Securities and Exchange Commission in December 2003. For sales to all customers, including manufacturer representatives, distributors or their third-party customers, these criteria are met at the time product is shipped. When other significant obligations remain after products are delivered, revenue is recognized only after such obligations are fulfilled. In addition, judgments are required in evaluating the credit worthiness of our customers. Credit is not extended to customers and revenue is not recognized until we have determined that collectibility is reasonable assured.

Allowance for Doubtful Accounts—Our policy is to maintain allowances for estimated losses resulting from the inability of our customers to make required payments. Credit limits for all customers are established based upon several factors, including but not limited to financial condition and stability, payment history, published credit reports and use of credit references. On a monthly basis, management performs various analyses to

16

evaluate accounts receivable balances to ensure recorded amounts reflect estimated net realizable value. This review includes accounts receivable agings, other operating trends and relevant business conditions, including general economic factors, as they relate to the Company’s domestic and international customers. When a customer’s account balance becomes past due, we initiate dialogue with the customer to determine the cause. If it is determined that the customer will be unable to meet its financial obligation to us, such as in the case of a bankruptcy filing, we record a specific allowance to reduce the related receivable to the amount we expect to recover given all of the information presently available.

Inventories—As a designer and manufacturer of high technology systems, we are exposed to a number of economic and industry factors that could result in portions of our inventories becoming either obsolete or in excess of anticipated usage. These factors include, but are not limited to, technological changes in our markets, our ability to meet changing customer requirements, competitive pressures in products and prices, and the availability of key components from our suppliers. Our policy is to record inventory write-downs when conditions exist that suggest our inventories may be in excess of anticipated demand for our products and market conditions. We regularly evaluate the ability to realize the value of our inventories based upon a combination of factors including the following: historical usage rates, forecasted sales or usage, product end of life dates, estimated current and future market values and new product introductions. Purchasing requirements and alternative usage avenues are explored within these processes to mitigate inventory exposure. When recorded, our write-downs are intended to reduce the carrying value of our inventories to their net realizable value and establish a new cost basis.

Deferred Taxes—The Company applies the asset and liability method in recording income taxes, under which deferred income tax assets and liabilities are determined, based on the differences between the financial reporting and tax bases of assets and liabilities and are measured using currently enacted tax rates and laws. Additionally, deferred tax assets are evaluated and a valuation allowance is established if it is more likely than not that all or a portion of the deferred tax asset will not be realized. Management continues to review the level of the valuation allowance on a quarterly basis. There can be no assurance that the Company’s future operations will produce sufficient earnings so that the deferred tax assets can be fully utilized.

Intangible Assets—There is a periodic review of intangible and other long-lived assets for impairment. This review consists of the analysis of events or changes in circumstances that would indicate the carrying amount of the assets may not be recoverable. Recoverability is determined by comparing the forecasted future undiscounted net cash flows from the operations to which the assets relate, based on management’s best estimates using the appropriate assumptions and projections at the time, to the carrying amount of the assets. If the carrying value is determined to be in excess of future operating cash flows, the asset is considered impaired and a loss is recognized equal to the amount by which the carrying amount exceeds the estimated fair value of the assets.

Recently issued accounting pronouncements

Refer to Note 1 of the Notes to Consolidated Financial Statements for a discussion of recently issued accounting pronouncements.

17

Discussion of Operating Results

Sales—Sales in the Balancer segment decreased $1.4 million, or 17.2%, to $7.0 million for Fiscal 2009 compared to $8.4 million for Fiscal 2008. This decrease is primarily due to decreased sales in North America and Europe during the year. North American sales decreased $1.0 million, or 25.1%, in Fiscal 2009 compared to the prior year. European sales decreased $411,000, or 25.9%, in Fiscal 2009 compared to Fiscal 2008. Market demand in Asia for the Balancer segment products was flat with that region showing a decrease of $22,000, or 0.8%, for Fiscal 2009 compared to the prior year. The decreases in North America and Europe are primarily due to lower volumes of shipments caused by weaknesses in the global economy and softening of the worldwide automotive, bearing and aircraft industries and its impact on the machine tool industry. The European market is also negatively impacted by greater competition with other European companies. The global economic crisis has not impacted the Chinese market as much as other regions of the world resulting in relatively flat sales in Asia. As with the North American market, the duration of the strength or weakness in demand in Asia and Europe cannot be forecasted with any certainty given the weaknesses in the global economy.

Sales in the Measurement segment decreased $477,000, or 15.9%, to $2.5 million in Fiscal 2009 compared to $3.0 million in Fiscal 2008. The decrease is primarily due to the lower volumes of shipments of laser-based surface measurement products to disk drive and silicon wafer manufacturers. These industries have undergone significant consolidation as manufacturers merged or exited the markets resulting in a redeployment of equipment rather than making additional investments in capital equipment. Fiscal 2009 sales of laser-based dimensional sizing products increased slightly, $18,000 or 0.9%, as compared to Fiscal 2008.

Sales in the Balancer segment increased $490,000, or 6.2%, to $8.4 million for Fiscal 2008 compared to $7.9 million for Fiscal 2007. This increase is primarily due to increased sales in North America and Asia during the year. North American sales increased $401,000, or 11.2%, in Fiscal 2008 compared to the prior year. Market demand in Asia for the Balancer segment products remained strong with that region showing an increase of $327,000, or 13.4%, for Fiscal 2008 compared to the prior year. European sales decreased $68,000, or 4.1%, in Fiscal 2008 compared to Fiscal 2007. The increase in North American and Asian sales is primarily the result of a recovery from softer balancer sales experienced over the past two years due to weaknesses in the worldwide automotive, bearing and aircraft industries and its impact on the machine tool industry. The European market has

18

continued its recent weakness due to the economic conditions in these manufacturing industries and greater competition with other European companies. As with the North American market, the duration of the stronger demand in Asia and the weaker conditions in the European cannot be forecasted with any certainty.

Sales in the Measurement segment decreased $951,000, or 24.0%, to $3.0 million in Fiscal 2008 compared to $4.0 million in Fiscal 2007. The decrease is primarily due to the lower volumes of shipments of surface measurement products to disk drive and silicon wafer manufacturers. These industries have undergone significant consolidation as manufacturers merged or exited the markets resulting in a redeployment of equipment rather than making additional investments in capital equipment. Fiscal 2008 sales of laser-based distance measurement and dimensional sizing products increased slightly, $5,000, as compared to Fiscal 2007.

Gross margin—Gross margin for Fiscal 2009 decreased to 43.6% as compared to 53.6% for Fiscal 2008. This decrease is due to changes in the product sales mix shifting towards lower margin products and increases in reserves for excess and obsolete inventory. Balancer margins were also negatively impacted as a result of higher sales in foreign markets as a large portion of those sales are made through distributors who receive favorable pricing. Gross margin for Fiscal 2008 decreased to 53.6% as compared to 55.8% for Fiscal 2007. This decrease is due to the product sales mix shifting towards lower margin products.

Operating expenses—Operating expenses increased $797,000, or 15.2%, to $6.1 million for Fiscal 2009 as compared to $5.3 million for Fiscal 2008. General, administrative and selling expenses increased $406,000 or 8.8% for Fiscal 2009 as compared to Fiscal 2008. This increase is primarily due to higher personnel costs resulting from increased headcount, higher stock based compensation and higher amortization expenses related to the identifiable intangible assets acquired from Xtero, offset by lower commissions related to the decrease in sales. Research and development expenses increased $391,000 or 62.3% as compared to the prior year primarily due to new product development associated with the technologies acquired from Xtero and new product development related to existing product lines. Operating expenses increased $397,000, or 8.2%, to $5.3 million for Fiscal 2008 as compared to $4.9 million for Fiscal 2007. This increase is primarily due to increased research and development expenses of $540,000 related to technologies acquired from Xtero and expenses associated with the implementation of Section 404 of the Sarbanes-Oxley Act offset by lower personnel costs in general, administrative and sales expenses.

Other income—Other income consists of interest income, foreign currency exchange gain (loss) and other income (expense). Interest income was $74,000, $227,000 and $206,000 in Fiscal 2009, 2008 and 2007, respectively. Interest income has decreased due to lower investment balances and lower interest rates. Foreign currency exchange loss was $24,000 in Fiscal 2009. Foreign currency exchange gain was $25,000 and $21,000 in Fiscal 2008 and 2007, respectively.

Income tax provision—The effective tax rate in Fiscal 2009 was 15.6%. The effective tax rate on consolidated net loss differs from the federal statutory tax rate primarily due to research and experimentation credits, lower effective tax rates on net income reported by SEL and the effect of changes in tax contingencies offset by changes in the deferred tax valuation allowance, the expiration of capital loss carryforwards, a foreign jurisdiction statutory gain exclusion and certain expenses not deductible for income tax reporting. The effective tax rate in Fiscal 2008 was 0.7%. The effective tax rate on consolidated net income differs from the federal statutory tax rate primarily due to export tax incentives claimed during the year related to prior years, domestic manufacturing deduction, lower effective tax rates on net income reported by the Company’s wholly owned subsidiary, Schmitt Europe Ltd. (SEL), located in the United Kingdom, the net tax benefits related to a gain exclusion provision provided in Canada on the sale technology from the Canadian subsidiary to a US subsidiary and a reduction in the valuation allowance offset by certain expenses not deductible for income tax reporting. The effective tax rate was 35.6% for Fiscal 2007. Our effective tax rate on consolidated net income differs from the federal statutory tax rate primarily due to certain expenses not deductible for income tax reporting offset by lower effective tax rates on net income reported by SEL. The effective tax rate of 24.3% in Fiscal 2006 differs from the federal statutory tax rate primarily due to a reduction in the valuation allowance. Management believes the effective tax rate on consolidated net income in future periods will reflect a normal combined state and federal rate, net of the effect from expenses not deductible for income tax reporting purposes.

19

Net income—Net income decreased $3.3 million to a net loss of $2.2 million, or $0.75 per diluted share, for Fiscal 2009 as compared to net income of $1.1 million, or $0.39 per diluted share, for Fiscal 2008. Net income decreased due primarily to lower sales, lower gross profit and higher operating expenses during Fiscal 2009. Net income decreased $182,000, or 14.1% to $1.1 million, or $0.39 per diluted share, for Fiscal 2008 as compared to $1.3 million, or $0.47 per diluted share, for Fiscal 2007. Net income decreased due primarily to lower sales, lower gross profit and higher research and development expenses offset by a lower tax provision during Fiscal 2008.

LIQUIDITY AND CAPITAL RESOURCES

The Company’s working capital decreased $615,000 to $9.3 million as of May 31, 2009 compared to $9.9 million as of May 31, 2008. Cash, cash equivalents and available for sale short term investments decreased $1.3 million to $4.2 million as of May 31, 2009 from $5.5 million as of May 31, 2008. As of May 31, 2009, the Company had $4.2 million in cash and cash equivalents on hand compared to $3.0 million at May 31, 2008. As of May 31, 2009, the Company had no short term investments compared to $2.5 million at May 31, 2008. The Company moved their short term investments to money market funds as they matured during Fiscal 2009.

Cash used in operating activities was $1.2 million in Fiscal 2009 as compared to cash provided by operating activities of $890,000 in Fiscal 2008. The decrease was primarily due to decreases in net income, deferred taxes, accounts payable and taxes payable offset by increases in accounts receivable, depreciation and amortization, stock based-compensation, income taxes receivable and other accrued liabilities.

At May 31, 2009, we had accounts receivable of $1.1 million as compared to $1.6 million at May 31, 2008. The decrease in accounts receivable was due to lower sales in the fourth quarter of 2009 as compared to the fourth quarter in the prior year. At May 31, 2009, income taxes receivable were $334,000 due to the net loss incurred during Fiscal 2009. At May 31, 2009, total current liabilities decreased $495,000 to $906,000 as compared to $1.4 million at May 31, 2008. The decrease is primarily due to the timing of payments and decreases in taxes payable due to the net loss incurred as compared to the prior year.

During the year ended May 31, 2009, net cash provided by investing activities was $2.3 million, which consisted of net maturities of short-term investments of $2.5 million offset by additions to property and equipment of $172,000. Additions to property and equipment consisted primarily of new manufacturing and office equipment.

The Company has a $1.0 million bank line of credit agreement secured by U.S. accounts receivable, inventories and general intangibles. Interest is payable at the bank’s prime rate (3.25% as of May 31, 2009), or LIBOR plus 2.0%, (2.32% as of May 31, 2009). The agreement expires on March 1, 2011. There were no outstanding balances on the line of credit at May 31, 2009 and 2008.

We believe that our existing cash and investments combined with the cash we anticipate to generate from operating activities, and our available line of credit and financing available from other sources will be sufficient to meet our cash requirements for the foreseeable future. We do not have any significant commitments nor are we aware of any significant events or conditions that are likely to have a material impact on our liquidity or capital resources.

Interest Rate Risk

The Company did not have any derivative financial instruments as of May 31, 2009. However, the Company could be exposed to interest rate risk at any time in the future and, therefore, employs established policies and procedures to manage its exposure to changes in the market risk of its marketable securities.

20

The Company’s interest income and expense are most sensitive to changes in the general level of U.S. and European interest rates. In this regard, changes in U.S. and European interest rates affect the interest earned on the Company’s interest bearing cash equivalents and short term investments. The Company has a variable rate line of credit facility with a bank but there is no outstanding balance as of May 31, 2009. Also, there is no other long-term obligation whose interest rates are based on variable rates that may fluctuate over time based on economic changes in the environment. Therefore, at this time, the Company is not subject to interest rate risk on outstanding interest bearing obligations if market interest rates fluctuate and does not expect any change in the interest rates to have a material effect on the Company’s results from operations.

Foreign Currency Risk

The Company markets and sells its products worldwide and international sales have accounted for and are expected to continue to account for a significant portion of future revenue. The Company operates a subsidiary in the United Kingdom and acquires certain materials and services from vendors transacted in foreign currencies. Therefore, the Company’s business and financial condition is sensitive to currency exchange rates or any other restrictions imposed on their currencies. For Fiscal 2009, 2008 and 2007, results of operations included gains (losses) on foreign currency translation of ($24,000), $25,000 and $21,000, respectively. The foreign exchange gains or losses in Fiscal 2009, 2008 and 2007 were primarily attributable to Company’s United Kingdom subsidiary, Schmitt Europe, Ltd.

21

Schmitt Industries, Inc.

Consolidated Balance Sheets

The accompanying notes are an integral part of these consolidated financial statements

22

Schmitt Industries, Inc.

Consolidated Statements of Operations

The accompanying notes are an integral part of these consolidated financial statements

23

Schmitt Industries, Inc.

Consolidated Statements of Cash Flows

The accompanying notes are an integral part of these consolidated financial statements

24

Schmitt Industries, Inc.

Consolidated Statements of Changes in Stockholders’ Equity And Comprehensive Income

The accompanying notes are an integral part of these consolidated statements

25

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements

For The Years Ended May 31, 2009, 2008 and 2007

NOTE 1

SIGNIFICANT ACCOUNTING POLICIES

Nature of Operations

Schmitt Industries, Inc. (the Company) designs, manufactures, and markets computer controlled vibration detection and balancing equipment primarily to the machine tool industry. Through its wholly owned subsidiary, Schmitt Measurement Systems, Inc., the Company designs, manufactures and markets precision laser-based surface measurement systems for the disk drive, silicon wafer and optics industries; laser-based distance measurement and dimensional sizing products for a wide variety of commercial and industrial applications; and ultrasonic measurement products that accurately measure the fill levels of large liquefied propane tanks and transmit that data via satellite to a secure web site.

Principles of Consolidation

These consolidated financial statements include those of the Company and its wholly owned subsidiaries: Schmitt Measurement Systems, Inc. (SMS), Schmitt Europe, Ltd. (SEL) and Schmitt Industries (Canada) Limited. All significant intercompany accounts and transactions have been eliminated in the preparation of the consolidated financial statements.

Revenue Recognition

The Company recognizes revenue for sales and billing for freight charges upon delivery of the product to the customer at a fixed or determinable price with a reasonable assurance of collection, passage of title to the customer as indicated by shipping terms and fulfillment of all significant obligations, pursuant to the guidance provided by Staff Accounting Bulletin No. 104, “Revenue Recognition,” issued by the Securities and Exchange Commission in December 2003. For sales to all customers, including manufacturer representatives, distributors or their third-party customers, these criteria are met at the time product is shipped. When other significant obligations remain after products are delivered, revenue is recognized only after such obligations are fulfilled. In addition, judgments are required in evaluating the credit worthiness of our customers. Credit is not extended to customers and revenue is not recognized until we have determined that collectibility is reasonable assured.

Cash Equivalents

The Company generally invests excess cash in money market funds and investment grade highly liquid securities. The Company considers securities that are highly liquid, readily convertible into cash and have original maturities of less than three months when purchased to be cash equivalents. The Company’s cash consists of demand deposits in large financial institutions. At times, balances may exceed federally insured limits.

Short-Term Investments

At May 31, 2009, short-term investments were $0. At May 31, 2008, short-term investments of $2,499,863 were classified as available-for-sale. The carrying amount of short-term investments is stated at cost, which approximates fair market value because of their short maturities. There were no related unrealized holding gains or losses at May 31, 2009 and 2008.

Accounts Receivable

The Company maintains credit limits for all customers based upon several factors, included but not limited to payment history, published credit reports and use of credit references. Management performs various analyses

26

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

to evaluate accounts receivable balances to ensure recorded amounts reflect estimated net realizable value. This review includes accounts receivable agings, other operating trends and relevant business conditions, including general economic factors, as they relate to each of the Company’s domestic and international customers. If these analyses lead management to the conclusion that potential significant accounts are uncollectible, a reserve is provided. The allowance for doubtful accounts was $38,233 and $26,584 as of May 31, 2009 and 2008, respectively.

Inventory

Inventory is valued at the lower of cost or market with cost determined on the average cost basis. Costs included in inventories consist of materials, labor and manufacturing overhead, which are related to the purchase or production of inventories. Write-downs, when required, are made to reduce excess inventories to their net realizable values. Such estimates are based on assumptions regarding future demand and market conditions. If actual conditions become less favorable than the assumptions used, an additional inventory write-down may be required. As of May 31, 2009 and 2008, inventories consisted of:

Property and Equipment

Property and equipment are stated at cost. Depreciation is computed using the straight-line method over estimated useful lives of three to seven years for furniture fixtures, and equipment; three years for vehicles; and twenty-five years for buildings and improvements. Expenditures for maintenance and repairs are charged to expense as incurred.

Foreign Currency Translation

Financial statements for the Company’s subsidiaries outside the United States are translated into U.S. dollars at year-end exchange rates for assets and liabilities and weighted average exchange rates for income and expenses. The resulting translation adjustments are included as a separate component of stockholders’ equity titled “Accumulated Other Comprehensive Loss.” Transaction gains and losses are included in net income (loss).

Advertising

Advertising costs included in general, administrative and selling, are expensed when the advertising first takes place. Advertising expense was $82,512, $107,539 and $112,562 for the fiscal years ended May 31, 2009, 2008 and 2007, respectively.

Research and Development Costs

Research and development costs, predominately internal labor costs and costs of materials, are charged to expense when incurred.

27

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

Stock-Based Compensation

Stock-based compensation includes expense charges for all stock-based awards to employees and directors granted under the Company’s stock option plan. On June 1, 2006, the Company adopted Statement of Financial Accounting Standards (SFAS) No. 123(R), “Share-Based Payment (Revised 2004)”, which requires the measurement and recognition of compensation for all stock-based awards made to employees and directors including stock options based on estimated fair values. SFAS 123(R) supersedes previous accounting under Accounting Principles Board Opinion No. 25, “Accounting for Stock Issued to Employees” (APB 25), for periods beginning in Fiscal 2007. In March 2005, the Securities and Exchange Commission issued Staff Accounting Bulletin No. 107 relating to application of SFAS 123(R). The Company has applied the provisions of SAB 107 in our adoption of SFAS 123(R).

The Company adopted SFAS 123(R) using the modified prospective transition method, which requires the application of the accounting standard as of June 1, 2006, the first day of our 2007 fiscal year. Stock-based compensation recognized during the period is based on the value of the portion of the stock-based award that will vest during the period, adjusted for expected forfeitures. The compensation cost for awards granted on or after June 1, 2006 follow the provisions of SFAS 123(R) to determine the grant date fair value and compensation cost. Compensation cost for all stock-based awards is recognized using the straight-line method.

Income Taxes

The Company applies the asset and liability method in recording income taxes, under which deferred income tax assets and liabilities are determined, based on the differences between the financial reporting and tax bases of assets and liabilities and are measured using currently enacted tax rates and laws. Additionally, deferred tax assets are evaluated and a valuation allowance is established if it is more likely than not that all or a portion of the deferred tax asset will not be realized. The Company has historically had a valuation allowance against certain foreign net operating losses as well as domestic capital losses. Management continues to review the level of the valuation allowance on a quarterly basis. There can be no assurance that the Company’s future operations will produce sufficient earnings so that the deferred tax asset can be fully utilized.

Intangible Assets

Amortizable intangible assets, purchased technology and patents, are amortized over their estimated useful lives ranging from eleven to seventeen years. As of May 31, 2009 and 2008, amortizable intangible assets were $2,085,363 and $3,128,127 net of accumulated amortization of $542,669 and $327,690, respectively. Amortization expense is expected to be approximately $139,000 in Fiscal 2010 through 2012, $106,000 in Fiscal 2013 and $105,000 in Fiscal 2014.

During Fiscal 2007, the Company entered into a convertible promissory note agreement with Xtero Datacom, Inc. (Xtero) of Vancouver, British Columbia pursuant to which the Company will loan up to $250,000 USD to Xtero to fund product development and testing of Xtero satellite measurement technologies. During Fiscal 2008, the maximum amount of the loan was increased to $500,000. The advances under the loan agreement are based on established milestones being achieved by Xtero in the beta field testing of their technology. The loan is convertible into equity of Xtero at the sole option of Schmitt Industries, Inc. As of May 31, 2007, the Company had advanced $200,000 to Xtero. In the third quarter of Fiscal 2008, the Company forgave the outstanding loan payable of $500,000 when the acquisition was completed. This amount was considered as additional consideration. See Note 11 to the Consolidated Financial Statements for more information.

28

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

Intangible and other long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate the carrying amount of the asset may not be recoverable. Recoverability is determined by comparing the forecasted future net cash flows from the operations to which the assets relate, based on management’s best estimates using the appropriate assumptions and projections at the time, to the carrying amount of the assets. If the carrying value is determined to be in excess of future operating cash flows, the asset is considered impaired and a loss is recognized equal to the amount by which the carrying amount exceeds the estimated fair value of the assets. As of May 31, 2009, management did not believe impairment, as defined above, existed.

Earnings (Loss) Per Share

Basic earnings (loss) per share is computed using the weighted average number of common shares outstanding. Diluted earnings (loss) per share is computed using the weighted average number of common shares outstanding, adjusted for dilutive incremental shares attributed to outstanding options to purchase common stock. Common stock equivalents for stock options are computed using the treasury stock method. In periods in which a net loss is incurred, no common stock equivalents are included since they are antidilutive and as such all stock options outstanding are excluded from the computation of diluted net loss in those periods. 86,187 potentially dilutive common shares from outstanding stock options have been excluded from diluted earnings (loss) per share for the year ended May 31, 2009.

Concentration of Credit Risk

Financial instruments that potentially expose the Company to concentration of credit risk are trade accounts receivable. Credit terms generally include a discount of 1.5% if the invoice is paid within ten days, with the net amount payable in 30 days.

Financial Instruments

The carrying value of all other financial instruments potentially subject to valuation risk (principally consisting of cash and cash equivalents, short term investments, accounts receivable and accounts payable) also approximate fair value because of their short-term maturities.

Shipping and Handling Charges

The Company incurs costs related to shipping and handling of its manufactured products. These costs are expensed as incurred as a component of cost of sales. Shipping and handling charges related to the receipt of raw materials are also incurred, which are recorded as a cost of the related inventory.

Use of Estimates

The preparation of the consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ from those estimates.

Recently Issued Accounting Pronouncements

In December 2007, the FASB issued SFAS No. 141 (revised 2007), “Business Combinations” (“SFAS 141(R)”), which replaces SFAS No 141. SFAS 141(R) establishes principles and requirements for how an

29

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

acquirer in a business combination recognizes and measures in its financial statements the identifiable assets acquired, the liabilities assumed, and any controlling interest; recognizes and measures the goodwill acquired in the business combination or a gain from a bargain purchase; and determines what information to disclose to enable users of the financial statements to evaluate the nature and financial effects of the business combination. SFAS is to be applied prospectively to business combinations for which the acquisition date is after May 31, 2009.

In May 2009, the FASB issued SFAS No 165, “Subsequent Events” (“SFAS 165”). SFAS 165 is intended to establish general standards of accounting for and disclosure of events that occur after the balance sheet date but before financial statements are issued or available to be issued. It requires the disclosure of the date through which an entity has evaluated subsequent events and the basis for selecting that date, that is, whether that date represents the date the financial statements were issued or were available to be issued. SFAS 165 is effective for interim or annual financial periods ending after June 15, 2009 and will be adopted by the Company in the first quarter of Fiscal 2010. The Company does not expect the adoption of SFAS 165 will have a material effect on its consolidated results of operations or its financial condition.

NOTE 2

LINE OF CREDIT

In February 2009, the Company renewed its $1.0 million bank line of credit agreement secured by U.S. accounts receivable, inventories and general intangibles which expires on March 1, 2011. Interest is payable at the bank’s prime rate (3.25% as of May 31, 2009) or LIBOR plus 2.0%, (2.32% as of May 31, 2009). There were no outstanding balances on the line of credit at May 31, 2009 and 2008.

NOTE 3

LONG-TERM OBLIGATIONS

As of May 31, 2009, there were no outstanding obligations under capital leases or purchase contracts. The Company leases certain facilities and equipment to support operations under non-cancelable operating leases and other contractual obligations. Total rent expense for the years ended May 31, 2009, 2008 and 2007 amounted to $36,394, $32,370 and $64,824, respectively.

The approximate future minimum commitments under leases and contractual obligations for each of the years ending May 31 are as follows:

NOTE 4

INCOME TAXES

The provision for income taxes is as follows:

30

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

Deferred tax assets (liabilities) are comprised of the following components:

The net deferred tax asset is classified as follows:

Deferred tax assets are evaluated and a valuation allowance is established if it is more likely than not that all or a portion of the deferred tax asset will not be realized. The Company has recorded a substantial deferred tax asset related to temporary differences between book and tax bases of assets and liabilities. During Fiscal 2009, the Company increased its valuation allowance $903,091 as a result of the write-down of deferred tax assets. This increase was partially offset by a decrease of $694,696 due to the expiration of the related capital losses. The Company has provided a full valuation allowance against all of its deferred tax assets as the recent loss has been given more weight than projected future income when determining the need for a valuation allowance.

The Company has a federal net operating loss carryforward of approximately $10,000 which expires in 2029 along with the federal general business and other credit carryforwards. The Company has a state net operating loss carryforward of approximately $1.5 million which expires in 2024.

31

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

The provision (benefit) for income taxes differs from the amount of income taxes determined by applying the U.S. statutory federal tax rate to pre-tax income (loss) due to the following:

Adoption of FIN 48

Each year the Company files income tax returns in the various federal, state and local income taxing jurisdictions in which it operates. These tax returns are subject to examination and possible challenge by the taxing authorities. Positions challenged by the taxing authorities may be settled or appealed by the Company. As a result, there is an uncertainty in income taxes recognized in the Company’s financial statements in accordance with SFAS No. 109. In 2006, the FASB issued FIN 48, which clarifies the application of SFAS 109 by defining criteria that an individual income tax position must meet for any part of the benefit of that position to be recognized in an enterprise’s financial statements and provides guidance on measurement, derecognition, classification, accounting for interest and penalties, accounting in interim periods, disclosure, and transition.

On June 1, 2007, the Company adopted the provisions of FIN 48. The adoption of FIN 48 resulted in a $34,464 decrease in the Company’s liability for unrecognized tax benefits, which was accounted for as an increase to the June 1, 2007 retained earnings balance. At June 1, 2007, the gross amount of unrecognized tax benefits was approximately $586,000, which included approximately $150,000 of net unrecognized tax benefits that, if recognized, would reduce the Company’s effective income tax rate. During the third quarter of Fiscal 2009, the Company completed an examination of its federal tax returns for the years ended May 31, 2005 through 2007. The Company recognized tax benefits of approximately $150,000 including interest and penalties during Fiscal 2009.

A reconciliation of the beginning and ending amount of unrecognized income tax benefits is as follows:

32

Schmitt Industries, Inc.

Notes to Consolidated Financial Statements—(Continued)

For The Years Ended May 31, 2009, 2008 and 2007

Interest and penalties associated with uncertain tax positions are recognized as components of the “Provision for income taxes.” The Company’s accrual for interest and penalties was $96,500 upon adoption of FIN 48. The liability for interest and penalties decreased to $0 due to the completion of the federal examination. The liability for payment of interest and penalties increased to $120,000 as of May 31, 2008.

Several tax years are subject to examination by major tax jurisdictions. In the United States, federal tax years for Fiscal 2007 and after are subject to examination. In the United Kingdom, tax years for Fiscal 2006 and after are subject to examination. In Canada, tax years for 2005 and after are subject to examination. In the United States, returns related to an acquired subsidiary for the year ended October 31, 1994 and final return for the period ended May 19, 1995 are also subject to examination.

NOTE 5

COMMITMENTS AND CONTINGENCIES

In a transaction related to the acquisition of Schmitt Measurement Systems, Inc., formerly TMA Technologies, Inc. (TMA), the Company established a royalty pool and vested in each shareholder and debt holder of the acquired company an interest in the royalty pool equal to the amount invested or loaned including interest payable through March 1995. The royalty pool is funded at 5% of net sales (defined as gross sales less returns, allowances and sales commissions) of the Company’s surface measurement products and future derivative products developed by Schmitt Industries, Inc., which utilize these technologies. As part of the royalty pool agreement, each former shareholder and debt holder released TMA from any claims with regard to the acquisition except their rights to future royalties. Royalty expense applicable to the years ended May 31, 2009, 2008 and 2007 amounted to $19,352, $47,344 and $89,350, respectively.

NOTE 6

SEGMENT INFORMATION

The Company has two reportable business segments: the design and assembly of dynamic balancing systems and components for the machine tool industry (Balancer), and the design and assembly of laser-based test and measurement systems (Measurement). The Company operates in three principal geographic markets: United States, Europe and Asia.