SCI Engineered Materials, Inc. - Annual Report: 2021 (Form 10-K)

​

​

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

​

Form 10-K

​

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

For The Fiscal Year Ended December 31, 2021

​

Commission File Number: 0-31641

​

SCI ENGINEERED MATERIALS, INC.

(Exact name of registrant as specified in its charter)

​

​

2839 Charter Street

Columbus, Ohio 43228

(Address of principal executive offices)

Registrant’s telephone number, including area code: (614) 486-0261

​

​

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

​

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act. Yes ☐  No ☒

​

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

​

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes ☒ No ☐

​

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

Large accelerated filer ☐ Accelerated filer ☐ Non-accelerated filer ☒ Smaller reporting company ☒ Emerging growth company ☐

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

​

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ☐ No ☒

​

The aggregate market value of the Registrant’s common equity held by non-affiliates of the Registrant was approximately $10,815,396 on June 30, 2021. For purposes of this disclosure, shares of common stock held by persons who hold more than 10% of the outstanding shares of common stock and shares held by executive officers and directors of the registrant have been excluded because such persons may be deemed to be affiliates. This determination of executive officer or affiliate status is not necessarily a conclusive determination for other purposes. There were 4,506,269 shares of the Registrant’s Common Stock outstanding on February 3, 2022.

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

​

​

​

​

​

​

DOCUMENTS INCORPORATED BY REFERENCE

Portions of our Proxy Statement for the 20221 Annual Meeting of Stockholders are incorporated by reference in Part III.

​

Note Regarding Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended, and Section 26A of the Securities Act of 1933, as amended. The words “anticipate,” “believe,” “expect,” “estimate,” and “project” and similar words and expressions identify forward-looking statements, which speak only as of the date hereof. Investors are cautioned that such statements involve risks and uncertainties that could cause actual results to differ materially from historical or anticipated results due to many factors, including, but not limited to, the factors discussed in “Risk Factors.”  The Company undertakes no obligation to publicly update or revise any forward-looking statements.

​

2

​

PART I

ITEM 1.BUSINESS

Introduction

SCI Engineered Materials, Inc. (“SCI”, “we” or the “Company”), an Ohio corporation, was incorporated in 1987. We operate in one segment as a global supplier and manufacturer of advanced materials for Physical Vapor Deposition (“PVD”) Thin Film Applications. We are focused on markets within the PVD industry including Aerospace, Defense, Glass, Photonics, and Solar. Substantially all revenues are generated from customers with multi-national operations. Through collaboration with end users and Original Equipment Manufacturers, the Company develops innovative customized solutions enabling commercial success.

History of the Company

The late Dr. Edward Funk, Sc.D., and his late wife Ingeborg founded SCI in 1987. Dr. Funk, formerly a Professor of Metallurgy at The Ohio State University and a successful entrepreneur, envisioned significant market potential for the then newly discovered High Temperature Superconductivity (“HTS”) material YBCO (T_c of 90^o K). Our first product was a 99.999% pure, co-precipitated YBCO 1-2-3 powder. Over the years we expanded our product line by adding other High T_c Powders, sintered shapes, single crystal substrates, and non-superconducting sputtering targets. At this time, we are not pursuing this market, but these early years of development are the foundation on which our material science experience is built.

We opened a subdivision, Target Materials Inc. (“TMI”), in 1991 to supply the increasing worldwide demand for sputtering and laser ablation targets. We became a full-service manufacturer of high-performance thin film materials, providing a wide selection of metals, ceramics, and alloys for sputtering targets, evaporation sources, and other PVD applications. We served the Research and Development market as well as the Industrial and Decorative Coating markets. During this time, we began to manufacture targets for the photovoltaic, flat panel display, and semiconductor industries.

SCI and TMI were merged in 2002. We continued to manufacture complex ceramic, metal, and alloy products for the photonic, photovoltaic, media storage, flat panel display, and semiconductor industries. The Company’s name was changed to SCI Engineered Materials, Inc. from Superconductive Components, Inc. in 2007 to reflect its expanded market focus.

In January 2017, we received ISO 9001:2015 registration, an internationally recognized quality standard. We received ISO 9001:2008 registration in April 2010 and prior to that time we were ISO 9001:2000 registered.

For more than three decades we have been developing considerable expertise in the development and manufacturing ramp-up of innovative materials, such as Transparent Conductive Oxides (TCO)s. The Company is committed to finding further growth and is pursuing opportunities that can benefit from this expertise. Today, we serve a diverse base of domestic and multi-national corporations, universities, and leading research institutions. We actively seek to partner with organizations to provide solutions for difficult material challenges.

Business

We are a supplier of materials to the PVD industry. Customers need our materials to produce nano layers of metals and oxides for advanced material systems. Applications for PVD coatings range from everyday items to complex computer processors. Every day applications include automotive, transparent anti-scratch coatings on eyeglasses, coatings on kitchen faucets, as well as low emissivity glass for household windows. More technically advanced applications for our products include semiconductors, solar, flat panel displays, defense, aerospace, and photonics.

We continue to pursue niche opportunities where our core competencies give us an advantage and complement our manufacturing capabilities allowing us to enter new markets with minimal capital investment. This disciplined approach enables us to focus on those opportunities that are the best fit for our capabilities and offer the greatest long-term return. Considerations include our core strengths, resource requirements, and time-to-market.

3

​

Photonics currently represents the largest market for our materials. We and our customers are continually identifying new materials that improve the utility of optical coatings. This includes improvements in their ability to focus, filter or reflect light, all of which increase the potential demand for the types and amounts of products we sell in this market. Photonic applications continue to expand as new methods are found to manipulate light waves to enhance the various applications.

In 2018, we began to supply target materials to the roll-to-roll coating industry. Roll-to-roll PVD coating is an emerging market in which intermediate manufacturers use our advanced materials to coat flexible substrates for a wide range of applications. In a roll-to-roll coating system, multiple layers of different materials can be deposited over large areas on flexible substrates without costly down time associated with breaking vacuum. These coated substrates can be used as standalone products in high volume consumer goods or can be laminated into electronic and optical components such as solar panels, architectural glass and displays. Our rotatable bonding technology, compounded with our material development capabilities, position us well in this emerging market for potential growth.

We continue to invest in developing new products for all current markets with emphasis on accelerating time to market.

For the year ended December 31, 2021, we had total revenue of $13,448,021. This was an increase of $2,551,922 or 23.4% compared to 2020. This increase was primarily due to increased volume and higher raw material pricing. During 2020, total revenue was adversely impacted by lower volume, pricing, and COVID-19 related issues.

Our largest customer represented approximately 63% of total revenues in 2021 and 75% in 2020. Revenue from new customers in additional niche markets contributed to the year-over-year percentage decline.

Marketing and Sales

Europe and Asia, as well as the Americas, have high demand for sputtering targets. We continue to seek ways to expand our global marketing reach. We use various distribution channels for specific end markets through direct sales by our employees, independent distributors, and manufacturers’ representatives for international markets. We have manufacturer’s representatives in the Chinese, Korean and Taiwanese markets. Also, the internet provides tremendous opportunities for us to reach new customers with compatible product needs.

Our corporate website is www.sciengineeredmaterials.com. The website is designed to serve customers, suppliers, and investors with additional information in an easy-to-use format and includes expanded mobile access. There are also social media components, including LinkedIn®, Facebook®, and Twitter® to enhance the Company’s visibility and communication with all stakeholders. For customers and suppliers, there is expanded information about our product focus as well as a library of detailed product data sheets that continues to be updated. Investors can access current and archived information about the Company utilizing multiple electronic platforms.

Ceramics

We are capable of producing ceramic powders via several different processing techniques including solid state and precipitation. Ceramic targets can also be produced in a variety of ways depending on the end user applications. Production techniques include sintering, cold isostatic pressing and hot pressing.

Most of our products are manufactured from component chemicals and metal oxides supplied by various vendors.  We have also identified several suppliers that are capable of minimizing potential disruption in our business.

Metals

In addition to the ceramic targets previously mentioned, we produce metal sputtering targets and backing plates. The targets are often bonded to the backing plates for applications in the PVD industry. These targets can be produced by casting, hot pressing and machining of metals and metal alloys depending on the application.

Applications for metal targets are highly varied from applying decorative coatings for end uses such as sink faucets to the production of various electronic, photonic and semiconductor products.

We purchase various metals of reasonable high purity (often above 99.9%) for our applications. We are not dependent on a single source for these metals and do not believe losing a vendor would materially affect our business.

4

​

We have continually added production processes and testing equipment to enable us to manufacture and qualify many product compositions that can be used as PVD materials.

Competition

We have several domestic and international competitors in both the ceramic and metal fields, including Kurt Lesker, Process Materials, Inc. and Tosoh, who also supply targets.

Suppliers

Principal suppliers in 2021 were Johnson Matthey, Six Nine Metals and Silicon-HQ. In every case, we have established alternate vendors that can be used to ensure availability of required materials. As volume grows, we may enter into alliances or purchasing contracts with these or other vendors.

Research and Development

We continue to invest in developing new applications for our markets including electrically conductive Zinc Tin Oxide for Solar, Architectural Glass and Thin-Film Transistors. Specialty materials are being researched for use in niche markets such as additive manufacturing. Our development efforts utilize a disciplined innovation approach focused on accelerating time to market for these applications and involve ongoing research and development expense. We are developing sputtering targets for transparent electronic applications, which could be used to produce transparent thin film transistors via PVD processing.

We may seek funded research opportunities within our core competencies that maintain and expand technical understanding within our company.

We have certain proprietary knowledge and trade secrets related to the manufacture of metal and metal oxide PVD materials. This includes specific patents directly related to our products and market focus (see Intellectual Property section below).

New Product Initiatives

We are committed to expanding our core competencies in growth areas through development of innovative applications, continuing to pursue stronger customer relationships and entry into compatible niche markets.

Building on more than three decades of materials science expertise, we have developed several new applications for different markets. For example, we recently achieved commercial success with an electrically conductive Molybdenum Oxide material that has led to initial development of a commercially feasible rotary target with similar properties. Molybdenum Oxide is used in photovoltaic and optoelectronic markets which value rotary target geometry in their commercial processes. We have a patent pending on our high-power density bond process which has been initially well received by customers in the aerospace industry.

Zinc Magnesium Oxide and Zinc Tin Oxide materials may be used as a buffer layer material in CIGS solar cells. We are also exploring material applications in differing manufacturing areas that can capitalize on our expertise and industry relationships. Additional applications involve materials such as tungsten and molybdenum.

Consistent with our growth strategy, we have also identified niche markets that can benefit from our expertise in custom powder solutions, such as near infrared doped phosphors and short-wave infrared applications. These applications enable extended life of phosphors for specific nighttime identification needs of defense personnel and first responders.

Our research and development team includes a Ph.D. with a degree in Material Science. This knowledge base benefits our achievement of innovative product solutions. These applications require a deeper understanding beyond material properties. Our team provides knowledge in the areas of optical and electrical properties in these applications.

Intellectual Property

Our patent titled “Process for the Removal of Contaminants from Sputtering Target Substrates” (US Patent No. 10,138,545 B2) was issued on November 27, 2018. This provides a process for the removal of contaminants on a spent sputtering target used in Plasma Vapor Deposition.

5

​

We have the rights to multiple patents for technology related to the application of Zinc Oxide based Transparent Conductive Oxide in Displays. Our patent titled “Display Having a Transparent Conductive Oxide Layer Comprising Metal Doped Zinc Oxide Applied by Sputtering” (US patent No. 9,927,667) was issued on March 27, 2018; a related patent having the same title was issued on April 7, 2020 (US Patent No. 10,613,397), and we have a corresponding patent issued in Sweden. The transparent conductive oxides (TCOs) we developed in these patents have excellent electro-optical performance, high transmittance, high conductivity, and good chemical resistance. These patents have various applications that include LCDs, micro-LED, OLED, smart windows and mirrors, AR/VR goggles, e-papers, and wearable electronics. Our clients, in relevant applications, are entitled to use the patent number when referring to the devices covered by the patent and benefit from it. We believe the TCOs claimed and protected in these patents have wide and innovative applications which can put SCI in a unique position in the market as well as bring us additional business opportunities.

We also have an additional patent application pending in the US Patent and Trademark Office relating to specific technology that protects our processes used in achieving superior bonding in planar and rotatable targets which we intend to prosecute to issuance.

During 2016 we were granted a federal trademark registration for “SCI Engineered Materials”. We have additional rights in common law trademarks and services marks, as well as in our branding properties, including our blue logo.

We rely on a combination of patent and trademark law, license agreements, internal procedures, and nondisclosure agreements to protect our intellectual property; however, it should be noted that these measures may be invalidated, circumvented, or challenged. In addition, the laws of some foreign countries in which our products may be produced or sold may not protect our intellectual property rights to the same extent as the laws of the United States.

In the future, we may submit additional patent applications covering various inventions which have been developed by us. Although we cannot be guaranteed that these submissions will result in the issuance of patent. For example, the publication of U.S. patent applications can be delayed for up to one year, and tend to lag actual discoveries, and so that we may not be the first creator of inventions covered by pending patent applications or the first to file patent applications for such inventions. Additionally, other parties may independently develop similar technologies, duplicate our technologies or, if patents are issued to us or rights licensed by us, they may design around the patented aspects of any technologies we have developed or licensed.

Employees

We had 21 full-time employees as of December 31, 2021, and 2020. One of these employees holds a PhD in Material Science. We have never experienced a work stoppage and consider our relations with employees to be good. The employees do not have a bargaining unit. We are committed to continuing to provide an open and accountable workplace where employees feel empowered to speak up and raise issues. With this in mind, we provide multiple channels to speak up, ask for guidance, and report concerns. We also provide employees with paid time off to volunteer in local communities.

Environmental Matters

We handle all materials according to federal, state, and local environmental regulations and include Safety Data Sheets (SDS) with all shipments to customers. We maintain a collection of SDS sheets for all raw materials used in the manufacture of products and maintenance of equipment and ensure that all personnel follow the handling instructions contained in the SDS for each material. We contract with a reputable, fully permitted hazardous waste disposal company to dispose of the small amount of hazardous waste generated.

Collections and Write-offs

We collected receivables in an average of 39 days in 2021. We have occasionally written-off negligible amounts of accounts receivable as uncollectible and there were none in 2021 and 2020. We consider credit management critical to our success.

Seasonal Trends

We have not experienced and do not expect to experience seasonal trends in future business operations.

6

​

ITEM 1A.RISK FACTORS

We operate in a dynamic and rapidly changing environment that involves numerous risks and uncertainties. Certain factors may have a material adverse effect on our business, prospects, financial condition, and results of operations, and you should carefully consider them. Accordingly, in evaluating our business, we encourage you to consider the following discussion of risk factors, in its entirety, in addition to other information contained in this Annual Report on Form 10-K and our other public filings with the Securities and Exchange Commission (the “SEC”). Other events that we do not currently anticipate or that we currently deem immaterial may also affect our business, prospects, financial condition, and results of operations.

We desire to take advantage of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. The following factors have affected or could affect actual results and could cause such results to differ materially from those expressed in any forward-looking statements made. Investors should consider the following risks and speculative factors inherent in and affecting the business of SCI and an investment in our common stock.

Risks Relating to the Company

We have had operating losses in the past and may incur losses in the future.

Prior to 2017, the Company frequently reported annual net losses. Our results for 2021 reflect the fifth consecutive year of net income; however, we cannot provide assurances that we will be able to operate profitably in the future. We continue to invest in developing new products for all our markets. These efforts include accelerating time to market for those products and involve ongoing research and development expense.

During 2021 we reduced our accumulated deficit by $1,678,824 to $6,061,617 at December 31, 2021. Management’s plans include growing our business in current and additional niche markets, developing new products and increasing our revenue and presence in those markets. Management believes the actions that began during the last several years and continue today provide the opportunity for maintaining and improving liquidity and profitability. However, no assurances are made that such actions will result in sustained profitability.

A substantial portion of our sales has been dependent upon certain principal customers, the loss of whom could materially negatively affect the Company’s total sales.

Our top two customers accounted for approximately 84% of our net sales for the fiscal year ended December 31, 2021. Although they have been major customers of the Company for several years, we do not have written agreements with these customers that require any minimum purchase obligations, and the customers could stop buying the Company’s products at any time and for any reason. A reduction, delay, or cancellation of orders from these customers or the loss of these customers could significantly reduce our future revenues and profits. We cannot provide assurance that these customers or any of our other current customers will continue to place orders, that orders by existing customers will continue at current or historical levels or that we will be able to obtain orders from new customers.

We have limited marketing and sales capabilities outside North America.

We continue to develop our marketing and sales capabilities through targeted marketing, sales, technical, customer service and distribution capabilities. We may enter into agreements with third parties to also provide these services to successfully market our products.

7

​

Our success depends on our ability to retain key management personnel.

Our success depends in large part on our ability to attract and retain highly qualified management, administrative, manufacturing, sales, and research and development personnel. Due to the specialized nature of our business, it may be difficult to locate and hire qualified personnel. The loss of services of one of our executive officers or other key personnel, or our failure to attract and retain other executive officers or key personnel could have a material adverse effect on our business, operating results, and financial condition. Jeremy Young was named President and chief executive officer in 2019 and has an employment agreement with the Company that contains non-competition provisions as well as severance payments. Mr. Young has been with the Company for more than sixteen years. All other key management personnel have entered into non-competition agreements with the Company. Although we have been successful in planning for and retaining highly capable and qualified successor management in the past, there can be no assurance that we will be able to do so in the future.

Competition for employees is intense, and we may not be able to attract and retain the qualified and skilled employees needed to support our business.

We believe a key portion of future success depends on the efforts and talent of our employees, including technical and skilled mechanical personnel. This will be dependent on continuing to attract, develop, motivate, and retain qualified and skilled employees. Competition for highly skilled technical, risk management and financial personnel is expected to remain intense. We may not be able to hire and retain qualified personnel at compensation levels consistent with our compensation and salary structure. Some of the companies with which we compete for experienced employees have greater resources than we have and may be able to offer more attractive terms of employment.

We invest significant time and expense in training our employees and we continue to implement new employee retention strategies. If we fail to retain our employees, we could incur significant expenses in hiring and training new employees, and the quality of our services and our ability to serve our customers could decline, resulting in a material adverse effect to our business.

Changes in the strategies of key trade customers may adversely affect our business.

Our products are sold in a highly competitive global marketplace which continues to experience increased concentration. We may be negatively affected by changes in the strategies of our trade customers, such as inventory de-stocking, delisting of our products, and other conditions.

Disaster and other adverse events may seriously harm our business.

Our manufacturing facility may suffer harm as a result of natural or man-made disasters such as storms, earthquakes, hurricanes, tornadoes, floods, fires, terrorist attacks and other conditions. Such events could disrupt our operations, harm our operations and employees, severely damage or destroy our facility, adversely impact our business, reputation, and financial performance, or otherwise cause our business to suffer in ways that cannot currently be predicted.

Public health epidemics or outbreaks could adversely impact our business.

In December 2019, a novel strain of coronavirus (COVID-19) emerged in China. While initially the outbreak was largely concentrated in China and caused significant disruptions to its economy, it spread to other countries and infections were reported globally. The extent to which the coronavirus and subsequent strains impact our operations will continue to depend on future developments, which are highly uncertain and cannot be predicted with confidence, including the duration of the outbreak, new information which may emerge concerning the severity of the coronavirus and the actions to contain the coronavirus or treat its impact, among others. In particular, the continued spread of the coronavirus globally or emergence of new strains could adversely impact our operations, including our manufacturing and supply chain. Our operations could be negatively affected if employees are quarantined as the result of exposure to a contagious illness. Similarly, federal, state, and local mandates, or travel restrictions resulting from the rapid spread of contagious illnesses may have a material adverse effect on our business and results of operations.

8

​

Our competitors have far greater financial and other resources than us.

The market for PVD materials is substantial with significant competition in both ceramic and metal materials. While we believe that our products enjoy certain competitive advantages in design, function, quality, and availability, considerable competition exists from well-established firms such as Kurt Lesker, Process Materials, Inc., and Tosoh, all of which have more financial resources than us. We cannot provide assurance that developments by others will not render our products or technologies obsolete or less competitive.

Additional development of our products may be necessary due to uncertainty regarding development of markets.

Some of our products are in the early stages of commercialization and we believe it will be several years before these products have significant commercial end-use applications, and significant development work may be necessary to improve the commercial feasibility and acceptance of these products. There can be no assurance that we will be able to commercialize any of the products currently under development.

Our failure to comply with our debt covenants could have a material adverse effect on our business, financial condition, or results of operations.

Our debt agreements contain certain covenants. A breach of any of these covenants could result in a default under the applicable agreement. In the past our lenders have granted us a waiver or amendment when we sought relief from covenants. If a default were to occur, we would likely seek a waiver of that default, attempt to reset the covenant, or refinance the instrument and accompanying obligations. If we were unable to obtain this relief, the default could result in the acceleration of the total due related to that debt obligation. If a default were to occur, we may not be able to pay our debts or borrow sufficient funds to refinance them. Any of these events, if they occur, could materially adversely affect our results of operations, financial condition, and cash flows.

A lack of credit and/or limited financing availability to the Company, its vendors, or end users could adversely affect our business.

Our liquidity and financial condition could be materially and adversely affected if our ability to borrow money from new or existing lenders to finance our operations is reduced or eliminated. Similar adverse effects may also result if we realize reduced credit availability from trade creditors. Additionally, many of our customers require availability of financing to facilitate the purchase of our products. As a result, a continuing period of reduced credit availability in the marketplace could have adverse effects on our business. The Company has a line of credit with Fifth Third Bank for $1 million which expires on August 29, 2022.

Our business requires us to make capital expenditures to maintain and improve our facilities.

Our facilities sometimes require capital expenditures to address ongoing required maintenance and upgrade our capabilities. In addition, we often are required to make significant capital expenditures to satisfy customer requirements and produce newly developed products.

Our business could be negatively impacted by cyber and other security threats or disruptions.

We face various cyber and other security threats, including attempts to gain unauthorized access to sensitive information and networks; employee threats; threats to the safety of our directors, officers, and employees; threats to the security of our facilities and infrastructure; and threats from terrorist acts or other acts of aggression. Our customers and vendors face similar threats. Although we utilize internal and external independent controls to monitor and mitigate the risk of these threats, including periodic Information Technology training for all employees, there can be no assurance that these procedures and controls will be sufficient. Our security measures may also be breached due to employee error, malfeasance, system errors or vulnerabilities, or otherwise. Additionally, outside parties may attempt to fraudulently induce employees, users, or customers to disclose sensitive information to gain access to our data or our user’s or customer’s data. These threats could lead to losses of sensitive information or capabilities, harm to personnel, infrastructure, or products, and/or damage to our reputation as well as our vendor’s ability to perform on our contracts.

Cyber threats are evolving and include, but are not limited to, ransomware, malicious software, destructive malware, attempts to gain unauthorized access to data, disruption or denial of service attacks, and other electronic security breaches that could lead to disruptions in critical systems, unauthorized release of confidential, personal, or otherwise protected information (ours or that of our employees, customers, or vendors), and corruption of data, networks, or systems.

9

​

The impact of these factors is difficult to predict, but one or more of them could result in the loss of information or capabilities, harm to individuals or property, damage to our reputation, loss of business, regulatory actions, and potential liability, any of which could have a material adverse effect on our financial position, results of operations and/or cash flows.

Risks Related to Our Intellectual Property

Our patents and proprietary rights may not be enforceable.

We rely on a combination of patent and trademark law, license agreements, internal procedures, and nondisclosure agreements to protect our intellectual property. These may be invalidated, circumvented, or challenged. In addition, the laws of some foreign countries in which our products may be produced or sold may not protect our intellectual property rights to the same extent as the laws of the United States. Our failure to protect our patent and proprietary information could adversely affect us.

Rights we have to trademarks, patents and pending patent applications may be challenged.

We have a portfolio of intellectual property that includes common law and state rights, as well of federally and internationally recognized trademark and patent rights. In addition, we take active precautions to protect our trade secret rights through various contractual means. However, we recognize that third parties may challenge these rights, including through unauthorized use or misappropriation or theft, or by legal challenge in administrative or challenge in state or district court. Such challenges include the risks of long and costly litigation, as well as the potential loss of property rights and the assessment of damages against a losing party.

Risks relating to Intellectual Property.

Because U.S. patent applications are maintained in secret until patents are issued, and publications of discoveries in the scientific or patent literature tend to lag actual discoveries by several months, we may not be the first creator of inventions covered by issued patents or pending patent applications or the first to file patent applications for such inventions. Moreover, other parties may independently develop similar technologies, duplicate our technologies or, if patents are issued to us or rights licensed by us, design around the patented aspects of any technologies we developed or licensed. We may have to participate in interference proceedings declared by the U.S. Patent and Trademark Office to determine the priority of inventions, which could result in substantial costs. Litigation may also be necessary to enforce any patents held by or issued to us or to determine the scope and validity of others’ proprietary rights, which could result in substantial costs.

We may be unable to adequately prevent disclosure of trade secrets and other proprietary information.

To protect our proprietary and licensed technology and processes, we rely in part on confidentiality agreements with our corporate partners, employees, consultants, manufacturers, outside scientific collaborators and sponsored researchers and other advisors. These agreements may not effectively prevent disclosure of our confidential information and may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. In addition, others may independently discover our trade secrets and proprietary information. Failure to obtain or maintain trade secret protection could adversely affect our competitive business position.

The rapid technological changes of our industry may adversely affect us if we do not keep pace with advancing technology.

The PVD market is characterized by rapidly advancing technology coupled with long and uncertain paths to large market acceptance. Our success depends on our ability to keep pace with advancing technology and processes and industry standards. We have focused our development efforts on sputtering targets. We intend to continue to develop innovative materials and integrate those advances to the thin film coatings industry and other potential industries. However, our development efforts may be rendered obsolete by research efforts and technological advances made by others or by the failure of anticipated markets to emerge, and materials other than those we currently use may prove more advantageous.

10

​

Risks Related to Our Common Stock

Our Articles of Incorporation authorize us to issue additional shares of stock.

The Company is authorized to issue up to 15,000,000 shares of common stock, which may be approved by our Board of Directors for such consideration, as they may consider sufficient without seeking shareholder approval. As of December 31, 2021, we had 4,506,269 shares outstanding and 27,418 shares underlying options that are currently exercisable resulting in 10,466,313 shares of common stock available for issue. The issuance of additional shares of common stock in the future may reduce the proportionate ownership and voting power of current shareholders.

Our Articles of Incorporation authorize us to issue up to 260,000 shares of preferred stock. The issuance of preferred stock in the future could create additional securities which would have dividend and liquidation preferences prior to the outstanding shares of common stock. These provisions could also impede a non-negotiated change in control. The Board of Directors voted in November 2021 to authorize full redemption of 24,152 shares of the Company’s Convertible Preferred Stock, Series B (“Series B”) effective December 31, 2021. This involved cash payments of $248,766 ($10.30 per Series B share, which includes a 3% premium to the stated value of $10 per share), plus unpaid annual dividends of $265,672 ($11.00 per Series B share).

We have not paid dividends on our common stock in the past and do not expect to do so in the foreseeable future.

We have never declared or paid cash dividends on our shares of common stock and do not expect to do so in the foreseeable future. We intend to use future earnings for the growth of our business. As a result, investors must rely on sales of the common stock after price appreciation, which may not occur, as the best way to realize future gains on their investments.

Provisions in our Articles of Incorporation and Code of Regulations provide for indemnification of officers and directors which could require us to divert funds away from our business and operations.

Our Articles of Incorporation and Code of Regulations provide for the indemnification of our officers and directors. We may be required to advance costs incurred by an officer or director to pay judgments, fines and expenses incurred by an officer or director, including reasonable attorneys’ fees, as a result of actions or proceedings in which our officers and directors are involved by reason being or having been an officer or director of our company. Funds paid in satisfaction of judgments, fines, and expenses may be funds we need for operation and growth of our business.

Takeover defense provisions in Ohio law and our corporate governance documents may delay or prevent takeover attempts preventing our shareholders from realizing a premium on their stock.

Various provisions of Ohio corporation laws as well as our corporate governance documents may inhibit changes in control not approved by our Board of Directors and may have the effect of depriving our investors of an opportunity to receive a premium over the prevailing market price of our common stock in the event of an attempted hostile takeover. In addition, the existence of these provisions may adversely affect the market price of our common stock. These provisions include:

Our Board of Directors can use these and other provisions to prevent, delay or discourage a change in control of the company or a change in our management. Any such delay or prevention of a change in control of management could deter potential acquirers or prevent the completion of a takeover transaction to which our shareholders could receive a substantial premium over the current market price of our common stock, which may in turn limit the price investors might be willing to pay for our common stock.

11

​

The market for our common stock is limited, and as such our shareholders may have difficulty reselling their shares when desired or at attractive market prices.

Our stock price, trading volume, and market listing may make it more difficult for our shareholders to resell shares when desired or at attractive prices. In 2001, our stock began trading on The Over-the-Counter Bulletin Board, now known as the OTC Markets. Our common stock trades in low volumes and at low prices. Some investors view low-priced stocks as unduly speculative and therefore not appropriate candidates for investment. Many institutional investors have internal policies prohibiting the purchase or maintenance of positions in low-priced stocks. This has the effect of limiting the pool of potential purchases of our common stock at present price levels. Shareholders may find greater percentage spreads between bid and asked prices, and more difficulty in completing transactions and higher transaction costs when buying or selling our common stock than they would if our stock were listed on a major stock exchange.

Our common stock has been subject to the Securities and Exchange Commission’s “penny stock” regulations, which may limit the liquidity of common stock held by our shareholders.

Our common stock currently trades on the OTC Markets’ OTCQB market under the symbol “SCIA”. Based on a trading price below $5 per share, our common stock is considered a “penny stock” for purposes of federal securities laws, and therefore has been subject to regulations, which affected the ability of broker-dealers to sell our securities. Broker-dealers who recommend a “penny stock” to persons (other than established customers and accredited investors) must make a special written suitability determination and receive the purchaser’s written agreement to a transaction prior to sale.

If penny stock regulations apply to our common stock, it may be difficult to trade the stock because compliance with the regulations can delay and/or preclude certain trading transactions. Broker-dealers may be discouraged from effecting transactions in common stock because of the sales practice and disclosure requirements for penny stock. This could adversely affect the liquidity and/or price of our common stock and impede the sale of the common stock in the secondary market.

Risks Related to Government Regulation

We are subject to anti-corruption laws in the jurisdictions in which we may operate, including anti-corruption laws of China and the Federal Corrupt Practices Act (FCPA). Our failure to comply with these laws could result in penalties which could harm our reputation and have a material adverse effect on our business, results of operations and financial condition.

We are subject to the FCPA, which generally prohibits companies and their intermediaries from making improper payments to foreign officials for the purpose of obtaining or keeping business and/or other benefits, along with various other anticorruption laws. Although we continue to monitor policies and procedures designed to ensure that we, our employees, distributors and other intermediaries comply with the FCPA and other anti-corruption laws to which we are subject, there is no assurance that such policies or procedures will work effectively all of the time or protect us against liability under the FCPA or other laws for actions taken by our employees, distributors and other intermediaries with respect to our business or any businesses that we may acquire. If we are not in compliance with the FCPA and other laws governing the conduct of business with government entities (including local laws), we may be subject to criminal and civil penalties and other remedial measures, which could have an adverse impact on our business, financial condition, results of operations and liquidity. Any investigation of any potential violations of the FCPA or other anticorruption laws by U.S. or foreign authorities could have an adverse impact on our business, financial condition, and results of operations.

12

​

Environmental compliance costs and liabilities associated with our facility may have a material adverse effect on our business, financial condition, results of operations and prospects.

We are subject to various federal, state, and local environmental and health and safety laws and regulations with respect to our operations. These laws and regulations address various matters, including asbestos, fuel oil management, wastewater discharges, air emissions, and hazardous wastes. The costs of complying with these laws and regulations and the penalties for non-compliance can be substantial. For example, with respect to leased property, we may be held liable for costs relating to the investigation and cleanup of our leased property from which there has been a release or threatened release of a regulated material as well as other properties affected by the release. In addition to these costs, which are typically not limited by law or regulation and could exceed the property’s value, we could be liable for certain other costs, including, without limitation, governmental fines, and injuries to persons, property, or natural resources. Further, some environmental laws create a lien on the contaminated site in favor of the government for damages and the costs it incurs in connection with the contamination. While we are not aware of any potential environmental problems, no assurances are made that such problems and costs associated with them will not arise in the future. If any of our properties were found to violate environmental laws, we may be required to expend significant amounts of time and money to rehabilitate the property, and we may be subject to significant liability. Any environmental compliance costs and liabilities incurred may have a material adverse effect on our business, financial condition, results of operations and growth prospects.

The increasing costs of being a public company may strain our resources and impact our business, financial condition, and results of operations.

As a public company, we are subject to reporting requirements of the Securities Exchange Act of 1934, as amended or the Exchange Act, the Sarbanes-Oxley Act of 2002, or the Sarbanes Oxley Act and the 2010 Dodd-Frank Wall Street Reform and Consumer Protection Act, or the Dodd-Frank Act. The Exchange Act requires that we file annual, quarterly, and current reports with respect to our business and financial condition. The Sarbanes-Oxley Act requires that we maintain effective disclosure controls and procedures and internal controls for financial reporting. We are required to document and test our internal control procedures to satisfy the requirements of Section 404(b) of the Sarbanes-Oxley Act, which requires annual management assessments of the effectiveness of our internal controls over financial reporting. The Dodd-Frank Act requires us to audit our supply chain and report conflict minerals usage.

These requirements may place a strain on our systems and resources in the future and may require us to hire additional accounting and financial staff with the appropriate public company experience and technical accounting knowledge. In addition, the failure to maintain such internal controls could result in us being unable to provide timely and reliable financial information which could potentially subject us to sanctions or investigations by the Securities and Exchange Commission or events could have an adverse effect on our business, financial condition, or results of operations. Although we have taken steps to maintain our internal control structure as required by the Exchange Act and the Sarbanes-Oxley Act, we cannot provide any assurances that control deficiencies will not occur in the future.

Regulation from the Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”) could adversely affect our business or financial results.

Changes in regulatory requirements, such as the reporting requirements relating to conflict minerals originating in the Democratic Republic of Congo or adjoining countries included in the Dodd-Frank Act, or evolving interpretations of existing regulatory requirements, may result in increased compliance cost, capital expenditures and other financial obligations that could adversely affect our business or financial results. We conducted an analysis of our products and found that the above SEC defined “conflict minerals”, which are tantalum, tin, tungsten, and gold (3TG), can be found in our products. Therefore, the products that we manufacture are subject to the reporting obligations of Rule 13p-1.

Despite having conducted a good faith reasonable country of origin inquiry, we concluded that our supply chain remains “DRC conflict undeterminable”. We have reached this conclusion because we have been unable to determine the origin of the 3TG used. We will continue to work with our suppliers. Should the regulations or our analysis change, it could impact the sourcing of materials that we use to manufacture our products.

13

​

If significant tariffs or other restrictions are placed on imports or any related countermeasures are taken by other countries, our revenue and results of operations may be materially harmed.

Import tariffs and/or other mandates imposed by sovereign governments could potentially lead to a trade war with other foreign governments and could significantly increase the prices on raw materials that are critical to our business. We could be forced to increase prices to our customers or, if unable to do so, result in lowering our gross margin on products sold.

ITEM 1B.UNRESOLVED STAFF COMMENTS.

Not applicable.

ITEM 2.PROPERTIES.

Our office and manufacturing facilities are located at 2839 Charter Street, Columbus, Ohio, where we occupy approximately 32,000 square feet. We moved our operations into this facility in 2004. The lease on the property expires on November 30, 2024.

We are current on all operating lease liabilities.

ITEM 3.LEGAL PROCEEDINGS.

Not applicable.

ITEM 4.MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5.MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market for Common Stock

Our common stock currently trades on the OTC Markets’ OTCQB market under the symbol “SCIA”.

Based on its trading price, our common stock is considered a “penny stock” for purposes of federal securities laws, and therefore has been subject to certain regulations. See “Risk Factors” for specific disclosures concerning the market for the Company’s common stock.

Holders of Record

As of December 31, 2021, there were approximately 225 registered holders of record of our common stock and 4,506,269 shares issued and outstanding.

Dividends

We have never paid cash dividends on our common stock and do not expect to pay any dividends on our common stock in the foreseeable future. We intend to use our future earnings for the growth of the business.

The Board of Directors voted in November 2021 to authorize full redemption of 24,152 shares of the Company’s Convertible Preferred Stock, Series B (“Series B”) effective December 31, 2021. This involved cash payments of $248,766 ($10.30 per share, which includes a 3% premium to the stated value of $10 per share), plus unpaid annual dividends of $265,672 ($11.00 per share).

14

​

Equity Compensation Plan Information

The following table sets forth additional information as of December 31, 2021, concerning shares of our common stock that may be issued upon the exercise of options and rights under our existing equity compensation plans and arrangements approved by our shareholders which include our 2011 Stock Option Plan and 2006 Stock Option Plan. The information includes the number of shares covered by and the weighted average exercise price of, outstanding options and other rights, and the number of shares remaining available for future grants (excluding the shares to be issued upon exercise of outstanding options and other rights).

​

​

ITEM 6.RESERVED.

​

ITEM 7.MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Executive Summary

In March 2020, the World Health Organization declared the coronavirus disease (COVID-19) a global pandemic and recommended containment and mitigation measures worldwide. Since then, some federal, state, and local executive orders have been lifted and we continue to follow practical safety procedures. These procedures include, but are not limited to wearing masks, social distancing, staggering start times, and teleconferencing versus in person meetings. Almost all of our employees have been fully vaccinated. We recently resumed in person meetings with some customers and continue to maintain regular contact, via phone and other electronic means, with other customers and suppliers whom we are still unable to visit in person.

Based on ongoing conversations with customers, we do not expect to experience any material impairments or changes in accounting judgements related to COVID-19. Although we continue to face a period of uncertainty regarding the ongoing impact of the COVID-19 pandemic and emergence of new variants on projected customer demand, market conditions continue to gradually improve. In the midst of this challenging environment, we remain focused on taking the necessary steps to respond quickly to changes in our business through specific contingency plans including (but not limited to): reviewing and monitoring planned capital expenditures, reviewing all operating expenses for opportunities to reduce and/or defer spending, and aligning inventory to planned shipments and estimated revenue.

We continue to monitor the evolving situation related to COVID-19 including guidance from federal, state, and local public health authorities and may take additional actions based on these recommendations. In these circumstances, there may be developments outside our control requiring us to adjust our operating plan. As such, given the dynamic nature of this situation, we cannot reasonably estimate the impacts of COVID-19 or the emergence of new variants on our results of operations, cash flows and liquidity in the future.

Two additional issues continue to affect national and global market conditions. First, supply chain disruptions have become more frequent in recent months for the Company and some of its customers. Thus far, we have not experienced material adverse effects regarding product shipments; however, timely sourcing of certain materials is of increased concern. Second, published articles and corporate announcements continue to address the global semiconductor chip shortage, which is anticipated to continue in 2022. This shortage is affecting some of our customers which could impact the Company’s revenue, volume, and profitability. We continue to actively monitor these developments, including ongoing contact with our suppliers and customers, and adapting to their specific circumstances and forecasts.

On April 17, 2020, we entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), with a principal amount of $325,300. The PPP was established under the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) and administered by the U.S. Small Business Administration (the “SBA”). The SBA approved our Forgiveness Application in full on January 6, 2021.

15

​

The Employee Retention Credit (“ERC”), as originally enacted on March 27, 2020, by the CARES Act, is a refundable tax credit against certain employment taxes equal to 50% of the qualified wages an eligible employer pays to employees after March 12, 2020, and before January 1, 2021. The Taxpayer Certainty and Disaster Tax Relief Act (the “Relief Act”), enacted on December 27, 2020, amended, and extended the ERC. On March 1, 2021, the IRS released Notice 2021-20 to provide guidance on the original ERC, as modified by the Relief Act. During 2021 we filed Form 941-X to claim a credit of $105,000 on qualified wages paid in 2020. This receivable appears on the balance sheet as of December 31, 2021, as Tax Receivable, and as a credit to wages in the Statement of Operations during the twelve months ended December 31, 2021.

The Relief Act extended and enhanced the ERC for qualified wages paid after December 31, 2020, through June 30, 2021. Under the Relief Act, eligible employers may claim a refundable tax credit against certain employment taxes equal to 70% of the qualified wages an eligible employer pays to employees after December 31, 2020, through June 30, 2021. As of the March 11, 2021, passage of the American Rescue Plan Act, the ERC was available for all four quarters of 2021. However, the Infrastructure Investment and Jobs Act enacted on November 15, 2021, ended the ERC effective September 30, 2021.

During the first quarter of 2021, we experienced a decline in gross receipts of 25% compared to the first quarter of 2019. This decline, along with continued underutilization of certain manufacturing equipment, reduction in employee’s workloads, travel restrictions and supply chain issues, qualified us to receive the ERC. We filed Form 941 for the first quarter of 2021 and claimed a credit of $150,507 on qualified wages paid in the first quarter of 2021. These funds were received during the second quarter of 2021 and appear as a credit to wages in the Statement of Operations during 2021. An employer that has a decline continues to be eligible until the end of the calendar quarter in which gross receipts are greater than 80% of its 2019 calendar quarter receipts. Thus, we were eligible for this credit for the second quarter of 2021 in the amount of $151,701, which appears as a credit to wages in the Statement of Operations for 2021.

During the second quarter of 2021, we experienced a decline in gross receipts of 30% compared to the second quarter of 2019. This decline, along with continued underutilization of certain manufacturing equipment, reduction in employee’s workloads, travel restrictions and supply chain issues, qualified us to receive the ERC for the third quarter of 2021. As previously mentioned, an employer that has a decline in gross receipts continues to be eligible until the end of the calendar quarter in which gross receipts are greater than 80% of its 2019 calendar quarter receipts. As a result, we were eligible for this credit for the third quarter of 2021 in the amount of $153,713, which appears as a credit to wages in the Statement of Operations for 2021.

In addition, the American Rescue Plan Act of 2021 allows eligible employers with fewer than 500 employees to qualify for a tax credit for providing paid time off for each employee receiving COVID-19 vaccinations and for any time needed to recover from the vaccine. The Company received a credit of $11,042 and this amount appears as a credit to wages in the Statement of Operations for 2021.

For the year ended December 31, 2021, we had total revenue of $13,448,021. This was an increase of $2,551,992, or 23.4%, compared to 2020. The increase was primarily due to increased volume and higher raw material pricing. During 2020, total revenue was adversely impacted by lower volume, pricing, and COVID-19 related issues.

Gross profit was $3,529,255 for 2021 compared to $2,198,290 for 2020. The increase was attributable to higher revenue as well as product mix and improved manufacturing efficiency.

Operating expenses were $1,751,349 and $1,681,943 for 2021, and 2020, respectively.

Income from operations was $1,777,906 and $516,347 for 2021 and 2020, respectively, which included $571,962 related to the ERC and ARP credits during 2021.

Consistent with our growth strategy, we have identified niche markets that can benefit from our expertise in custom powder solutions, such as near-infrared doped phosphors and short-wave infrared applications. These applications enable extended life of phosphors for specific nighttime identification needs of defense personnel and first responders.

New initiatives are also being pursued that utilize our vacuum hot press, cold isostatic press, and kilns for increased production and development projects, including diffusion bonding. We recently manufactured and sold conductive metal oxides for direct current sputtering of Tungsten Oxide and Molybdenum Oxide materials. We continue to invest in developing new products for all our markets including specialty bonding processes for Aerospace customers. Those products involve research and development expense to accelerate time to market.

16

​

RESULTS OF OPERATIONS

Year 2021 compared to Year 2020

Revenue

For the year ended December 31, 2021, we had total revenue of $13,448,021. This was an increase of $2,551,992, or 23.4%, compared to 2020. The increase was principally due to increased volume and higher raw material pricing in 2021. During 2020, total revenue was adversely impacted by lower volume, pricing, and COVID-19 related issues.

Gross profit

Gross profit was $3,529,255 for 2021 compared to $2,198,290 for 2020. Gross profit as a percentage of revenue (gross margin) was 26.2% and 20.2% for 2021 and 2020, respectively. The increase in gross profit and gross margin was attributable to higher revenue as well as product mix and improved manufacturing efficiency. In addition, $328,356 was related to the ERC and ARP credits recognized in 2021.

General and administrative expense

General and administrative expense for 2021 and 2020, was $1,280,579 and $1,148,615, respectively, an increase of 11.5%. Increases in compensation and professional fees were partially offset by the ERC and ARP credits of $79,354 during 2021.

Included in general and administrative expense was $270,609 and $222,024 for professional fees during 2021 and 2020, respectively. These expenses were primarily related to SEC compliance costs for legal, accounting and stockholder relations fees. Additional fees were incurred during 2021 for the redemption of the Company’s Convertible Preferred Stock, Series B.

Research and development expense

Research and development expense for 2021 was $235,679 compared to $337,823 for 2020, a decrease of 30.2%. This decrease was primarily related to ERC and ARP credits of $90,974 during 2021. Specialty materials continue to be researched for use in niche markets which include custom applications and additive manufacturing. Our development efforts utilize a disciplined innovation approach focused on accelerating time to market for these applications and involve ongoing research and development expense.

Marketing and sales expense

Marketing and sales expense was $235,091 and $195,505 during 2021 and 2020, respectively. This was an increase of $39,586, or 20.2%. This increase was primarily related to higher compensation expense related to an increase in staff, outside consulting expense and increased travel with resumption of limited in-person meetings and industry tradeshows. These increased expenses were partially offset by the ERC and ARP credits of $73,278.

Stock compensation expense

Included in total expenses were non-cash stock-based compensation costs of $47,903 and $124,720 for 2021 and 2020, respectively. Compensation expense for all stock-based awards is based on the grant date fair value and recognized over the required service (vesting) period. Unrecognized non-cash stock-based compensation expense was $6,305 as of December 31, 2021, and will be recognized through 2023.

Interest

Interest expense was $32,140 and $32,087 for 2021 and 2020, respectively. Lower lease interest expense attributable to principal payments for lease obligations for 2021 was offset by less interest income due to lower interest rates during 2021 compared to the prior year.

17

​

Income taxes

Income tax expense was $392,242 for the twelve months ended December 31, 2021. In December 2020, we reversed in full our valuation allowance that had been recorded against the unrealizability of the deferred tax asset, which resulted in the recording of the asset of $1,019,317 at December 31, 2020. An income tax benefit of $1,017,503 for the year ended December 31, 2020, was recorded on the Statement of Operations. Management considered new evidence, both positive and negative, during 2021 that could affect its view of the future realization of deferred tax assets and determined that no valuation allowance was necessary, and the deferred tax asset was $663,820 at December 31, 2021.

Income applicable to common stock

Income applicable to common stock for 2021 and 2020 was $1,654,672 and $1,477,611, respectively. The income in 2021 was primarily the result of higher revenue, improved gross profit, and the ERC, as well as forgiveness of the PPP Loan in January 2021. The income tax benefit of $1,017,503 noted above represented a significant portion of income applicable to common stock for 2020.

Liquidity and Capital Resources

Cash

As of December 31, 2021, cash on hand was $4,140,942 compared to $2,917,551 at December 31, 2020. This increase of 44% was attributable to higher gross profit throughout 2021 as well as the ERC.

Working capital

At December 31, 2021, working capital was $3,907,135 compared to $2,810,629 at December 31, 2020, an increase of $1,096,506 or 39.0%. The increase was primarily due to the increase in cash noted above.

Cash from operations

Net cash provided by operating activities during 2021 was $2,610,548 and $991,032 during 2020. These figures represent net income net of noncash items, such as depreciation and amortization of $516,579 and $532,842 and non-cash stock-based compensation costs of $47,902 and $124,720 for 2021 and 2020, respectively. In addition, due to orders received throughout 2021, accrued expenses and customer deposits increased $834,718, and prepaid expenses increased $547,023 during 2021. Customer deposits decreased $1,378,531 and inventory decreased $1,566,457 during 2020. Deferred tax asset decreased $360,410 in 2021 from the initial amount of $1,017,503 recognized at December 31, 2020.

Cash from investing activities

Cash of $706,242 and $78,915 was used in investing activities during the twelve months ended December 31, 2021, and 2020, respectively, for the acquisition of production equipment. The Company used cash for the acquisition of production equipment during 2021 rather than utilize an equipment lease line of credit that was available.

Cash from financing activities

Cash of $160,416 and $127,174 was used in financing activities for principal payments to third parties for finance lease obligations during 2021 and 2020, respectively. The increase was due to the commencement of a finance lease during the second half of 2020 for the rebuild of production equipment. On December 31, 2021, we redeemed all 24,152 shares of our Convertible Preferred Stock, Series B. The redemption included cash payments of $248,766 plus unpaid annual dividends of $265,672. A dividend payment of $24,152 was previously made to owners of this stock during the second quarter of 2021 and 2020. As previously mentioned, during 2020 we entered into an unsecured promissory note under the Paycheck Protection Program, with a principal amount of $325,300 which was forgiven in January 2021.

18

​

Debt outstanding

Total debt outstanding decreased to $243,218 at December 31, 2021, from $728,934 at December 31, 2020, a decrease of 67%. As previously mentioned, cash of $160,416 was used for principal payments for finance lease obligations and our PPP loan of $325,300 was forgiven in full by the SBA.

Critical Accounting Policies

The preparation of financial statements and related disclosures in conformity with accounting principles generally accepted in the United States requires management to make judgments, assumptions and estimates that affect the amounts reported in the Financial Statements and accompanying notes. Note 2 to the Financial Statements in the Annual Report on Form 10-K for the year ended December 31, 2021, describes the significant accounting policies and methods used in the preparation of the Financial Statements. Estimates are used for, but not limited to, the accounting for the allowance for doubtful accounts, inventory allowances, property and equipment depreciable lives, patents and license useful lives, revenue recognition, income tax expense, deferred tax assets and liabilities, realization of deferred tax assets, stock-based compensation and assessing changes in which impairment of certain long-lived assets may occur. Actual results could differ from these estimates. The following critical accounting policies are impacted significantly by judgments, assumptions and estimates used in the preparation of the Financial Statements. The allowance for doubtful accounts is based on our assessment of the collectability of specific customer accounts and the aging of the accounts receivable. If there is a deterioration of a major customer’s credit worthiness or actual defaults are higher than our historical experience, our estimates of the recoverability of amounts due us could be adversely affected. Inventory purchases and commitments are based upon future demand forecasts. If there is a sudden and significant decrease in demand for our products or there is a higher risk of inventory obsolescence because of rapidly changing technology and customer requirements, we may be required to increase our inventory allowances and our gross profit could be adversely affected. The tax valuation allowance is based on our consideration of new evidence, both positive and negative, that could affect our view of the future realization of deferred tax assets. If we were to determine we would not be able to realize all or part of the deferred tax asset in the future, an adjustment to the deferred tax asset would be necessary which would reduce our net income for that period. Depreciable and useful lives estimated for property and equipment, licenses and patents are based on initial expectations of the period of time these assets and intangibles will provide benefit. Changes in circumstances related to a change in our business, change in technology or other factors could result in these assets becoming impaired, which could adversely affect the value of these assets.

Inflation

While there was not a significant impact from inflation on our operations during the past three fiscal years, we experienced increased costs during 2021 that are expected to continue into 2022.

ITEM 7A.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Not applicable

ITEM 8.FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

Our balance sheets as of December 31, 2021, and 2020, and the related statements of operations, shareholders’ equity and cash flows for the years ended December 31, 2021, and 2020, together with the Report of Independent Registered Public Accounting Firm thereon appear beginning on Page F-1.

ITEM 9.CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

Not applicable.

ITEM 9A.CONTROLS AND PROCEDURES.

Evaluation of Disclosure Controls and Procedures

Our management, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this report. In designing

19

​

and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and implemented, can only provide reasonable assurance of achieving the desired control objectives. Management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including the Chief Executive Officer and Chief Financial Officer, to allow timely discussions regarding required disclosure.

Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures are effective. Disclosure controls and procedures are defined by Rules 13a-15(e) and 15d-15(e) of the Exchange Act as controls and other procedures that are designed to ensure that information required to be disclosed by us in reports filed with the SEC under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms.

Inherent Limitations Over Internal Controls

Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;  (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures are being made only in accordance with authorizations of management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of assets that could have a material effect on the financial statements.

Management is responsible for the consistency, integrity, and presentation of information. We fulfill our responsibility by maintaining systems of internal control designed to provide reasonable assurance that assets are safeguarded, and transactions are executed in accordance with established procedures. The concept of reasonable assurance is based upon recognition that the cost of the controls should not exceed the benefit derived. We believe our systems of internal control provide this reasonable assurance.

The Board of Directors exercises its oversight role with respect to our systems of internal control primarily through its Audit Committee, which is comprised of independent directors. The Committee oversees our financial reporting, quarterly reviews, and audits to assess whether their quality, integrity, and objectivity are sufficient to protect shareholders’ investments.

Management’s Annual Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended). Management conducted an evaluation of the effectiveness of our internal control over financial reporting based on the criteria established in the Internal Control – Integrated Framework (2013 Framework) issued by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO"). We performed a review of our related procedures and controls and strengthened cross approval of various functions, including financial reporting and disclosure review controls by the Chief Financial Officer, to include the Chief Executive Officer and Audit Committee Chairperson where appropriate. We continue to report to the Audit Committee and the Board of Directors at least monthly (and more often as necessary). This reporting includes balance sheets, statements of operations, statements of cash flows, and other detail supporting these statements. Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of December 31, 2021.

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Our report was not subject to attestation by our registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permits us to provide only management’s report in this annual report.

Changes in Internal Control over Financial Reporting

Other than the remediation described above, there were no changes in our internal control over financial reporting (as defined in Rules 13a-13(f) and 15d-15(f) under the Exchange Act) that occurred during our second fiscal quarter of the fiscal year ended December 31, 2021, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

20

​

ITEM 9B.OTHER INFORMATION.

None.

ITEM 9C.DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS.

Not applicable.

PART III

ITEM 10.DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

The information required by this item is included under the captions, “Election of Directors,” “Executive Officers” and “Section 16(a) Beneficial Ownership Reporting Compliance” in our proxy statement relating to our 2022 Annual Meeting of Shareholders scheduled to be held on June 9, 2022, and is incorporated herein by reference.

We have a Business Conduct Policy applicable to all employees of the Company. Additionally, the Chief Executive Officer ("CEO") and all senior financial officers, including the principal financial officer, the principal accounting officer or controller, or any person performing a similar function (collectively, the "Senior Financial Officers") are bound by the provisions of our code of ethics relating to ethical conduct, conflicts of interest, and compliance with the law. The code of ethics is posted on our website at http://www.sciengineeredmaterials.com/corporate-governance.

We intend to satisfy the disclosure requirement under Item 10 of Form 8-K regarding any amendment to, waiver of, any provision of this code of ethics by posting such information on our website at the address and location specified above.

ITEM 11.EXECUTIVE COMPENSATION.

The information required by this item is included under the caption “Executive Compensation” in our proxy statement relating to our 2022 Annual Meeting of Shareholders scheduled to be held on June 9, 2022, and is incorporated herein by reference.

ITEM 12.SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

The information required by this item is included under the captions “Ownership of Common Stock by Directors and Executive Officers” and “Ownership of Common Stock by Principal Shareholders” in our proxy statement relating to our 2022 Annual Meeting of Shareholders scheduled to be held on June 9, 2022, and is incorporated herein by reference.

ITEM 13.CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

The information required by this item is included under the caption “Certain Relationships and Related Transactions, and Director Independence” in our proxy statement relating to our 2022 Annual Meeting of Shareholders scheduled to be held on June 9, 2022, and is incorporated herein by reference.

ITEM 14.PRINCIPAL ACCOUNTANT FEES AND SERVICES.

The information required by this item is included under the caption “Fees of the Registered Independent Public Accounting Firm for the year ended December 31, 2021, and 2020” in our proxy statement relating to our 2022 Annual Meeting of Shareholders scheduled to be held on June 9, 2022, and is incorporated herein by reference.

21

​

ITEM 15.EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.

​

22

​

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

​

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on the 4^th day of February 2022.

​

​

23

​

INDEX TO FINANCIAL STATEMENTS

​

​

​

F-1

​

To the Board of Directors and Shareholders

SCI Engineered Materials, Inc.

Report of Independent Registered Public Accounting Firm

Opinion on the Financial Statements

We have audited the accompanying balance sheets of SCI Engineered Materials, Inc. (the “Company”) as of December 31, 2021 and 2020, the related statements of operations, shareholders’ equity, and cash flows for each of the years then ended, and related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing separate opinions on the critical audit matter or on the accounts or disclosures to which it relates.

Realizability of Deferred Tax Assets

Description of the Matter

As described further in Note 9 to the financial statements, the Company assesses the realizability of deferred income tax assets, which represent the tax benefits of future tax deductions, based on available positive and negative evidence and by considering the adequacy of future taxable income from all sources, including prudent and feasible tax planning strategies. The Company assesses the need for a valuation allowance by evaluating both positive and negative evidence that may exist. We identified the realizability of deferred tax assets and the assessment of the need for a valuation allowance as a critical audit matter.

The principal consideration for our determination that the realizability of deferred tax assets is a critical audit matter is that the forecast of future taxable income is an accounting estimate subject to a high level of estimation uncertainty. There is inherent uncertainty and subjectivity related to management’s judgments and assumptions regarding the Company’s future taxable income, which are complex in nature and require significant auditor judgment.

F-2

​

How We Addressed the Matter in Our Audit

We obtained an understanding, evaluated the design and operating effectiveness of controls over the Company’s process to assess the realizability of the deferred tax assets and measurement of the valuation allowances, including controls over management’s review of the significant assumptions described above.

To test the realizability of the deferred tax assets, our audit procedures included, among others, evaluating the methodologies used, the significant assumptions for each type of evidence discussed above, and testing the completeness and accuracy of the underlying data used by the Company in its analysis. We involved income tax specialists and evaluated the nature of each of the deferred tax assets, including their expiration dates and their projected utilization when compared to projections of future taxable income. Additionally, we assessed the reasonableness of the methods, assumptions, and judgments used by management to assess available positive and negative evidence and determine whether a valuation allowance was necessary. Next, we considered management’s ability to accurately estimate projected future taxable income by comparing actual results to management’s historical estimates and evaluating whether there have been any changes that would affect management’s ability to accurately estimate future taxable income and performed sensitivity analyses of the significant assumptions to evaluate the changes in realizability of deferred tax assets that would result from changes in the assumptions. Lastly, we reviewed the Company’s income tax disclosures related to the matters described above.

GBQ Partners LLC

We have served as the Company’s auditor since 2014.

Columbus, Ohio

February 4, 2022

​

F-3

​

PART I. FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS

SCI ENGINEERED MATERIALS, INC.

BALANCE SHEETS

DECEMBER 31, 2021 AND 2020

ASSETS

​

​

The accompanying notes are an integral part of these financial statements.

​

F-4

​

SCI ENGINEERED MATERIALS, INC.

BALANCE SHEETS (continued)

DECEMBER 31, 2021 AND 2020

LIABILITIES AND SHAREHOLDERS’ EQUITY

​

​

The accompanying notes are an integral part of these financial statements.

​

F-5

​

SCI ENGINEERED MATERIALS, INC.

STATEMENTS OF OPERATIONS

YEARS ENDED DECEMBER 31, 2021 AND 2020

​

​

The accompanying notes are an integral part of these financial statements.

​

F-6

​

SCI ENGINEERED MATERIALS, INC.

STATEMENTS OF SHAREHOLDERS’ EQUITY

YEARS ENDED DECEMBER 31, 2021 AND 2020

​

​

The accompanying notes are an integral part of these financial statements.

​

F-7

​

SCI ENGINEERED MATERIALS, INC.

STATEMENTS OF CASH FLOWS

YEARS ENDED DECEMBER 31, 2021 AND 2020

​

​

The accompanying notes are an integral part of these financial statements.

​

F-8

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

​

Note 1.                 Business Organization and Purpose

SCI Engineered Materials, Inc. (“SCI”, “we” or the “Company”), an Ohio corporation, was incorporated in 1987. The Company operates in one segment as a global supplier and manufacturer of advanced materials for Physical Vapor Deposition (“PVD”) Thin Film Applications. The Company is focused on markets within the PVD industry including Aerospace, Defense, Glass, Photonics, and Solar. Substantially, all revenues are generated from customers with multi-national operations. The Company develops innovative customized solutions enabling commercial success through collaboration with end users and Original Equipment Manufacturers.

​

Note 2.                 Summary of Significant Accounting Policies

A.Cash - The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash.

​

B.Fair Value of Financial Instruments - The estimated fair value of amounts reported in the financial statements have been determined using available market information and valuation methodologies, as applicable (see Note 10).

​

C.Concentrations of Credit Risk - The Company’s cash balances, which are at times more than federally insured levels, are maintained at a large regional bank, and are continually monitored to minimize the risk of loss. The Company grants credit to most customers, who are varied in terms of size, geographic location, and financial strength. Customer balances are continually monitored to minimize the risk of loss.

​

The Company’s two largest customers accounted for 63% and 21% of total revenue in 2021. These two customers represented 43% of the accounts receivable trade balance at December 31, 2021. The Company expects to collect all outstanding accounts receivable as of December 31, 2021, from these customers.

​

The Company’s two largest customers accounted for 75% and 9% of total revenue in 2020. These two customers represented 61% of the accounts receivable trade balance at December 31, 2020. The Company subsequently collected all outstanding accounts receivable as of December 31, 2020, from these customers.

​

D.Accounts Receivable - The Company extends unsecured credit to customers under normal trade agreements which require payment within 45 days. The Company does not charge interest on delinquent trade accounts receivable. Unless specified by the customer, payments are applied to the oldest unpaid invoice. Accounts receivable are presented at the amount billed.

​

Management estimates an allowance for doubtful accounts, which was $15,000 as of December 31, 2021, and 2020. This estimate is based upon management’s review of delinquent accounts for any expected losses and an assessment of the Company’s historical evidence of collections. Specific accounts are charged directly to the reserve or bad debt expense when management obtains evidence of a customer’s insolvency or otherwise determines that the account is uncollectible. There was no bad debt expense during 2021 and 2020.

​

E.Inventories - Inventories are stated at the lower of cost or net realizable value on an acquired or internally produced lot basis, and consist of raw materials, work-in-process and finished goods. Cost includes material, labor, freight and applied overhead. Inventory reserves are established for obsolete inventory, lower of cost or net realizable value, and excess inventory quantities based on management’s estimate of net realizable value. The Company had an inventory reserve of $25,418 and $24,218 at December 31, 2021, and 2020, respectively.

F-9

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

Note 2.                 Summary of Significant Accounting Policies (continued)

F.Property and Equipment - Property and equipment are carried at cost. Depreciation is provided using the straight-line method based on the estimated useful lives of the assets. Useful lives range from three years on computer equipment to sixteen years on certain equipment. Leasehold improvements are amortized over the shorter of the estimated useful life or the term of the lease. Depreciation expense totaled $429,066 and $451,816 for the years ended December 31, 2021, and 2020, respectively. Expenditures for renewals and betterments are capitalized and expenditures for repairs and maintenance are charged to operations as incurred.

​

Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. If the fair value is less than the carrying amount of the asset, a loss is recognized for the difference. During 2021, various assets totaling $62,166 with a net book value of $15,569 were considered impaired. This impairment is offset against gain on disposal of equipment in the Statement of Operations. There was no property and equipment considered impaired during 2020.

​

G.Intangible Assets - The Company reviews intangible assets for impairment and performs detailed testing whenever impairment indicators are present. If necessary, an impairment loss is recorded for the excess of carrying value over fair value. There were no intangible assets considered impaired during 2021 or 2020.

​

Costs incurred to secure patents have been capitalized and amortized over the life of the patents. Cost and accumulated amortization of the patents at December 31, 2021, was $85,516 and $13,182 respectively, and cost and accumulated amortization of the patents at December 31, 2020, was $85,444 and $8,768, respectively. Amortization expense related to patents was $4,414 and $3,931 for the years ended December 31, 2021, and 2020, respectively. Amortization expense is expected to be at least $4,414 for each of the next five years.

​

H.Revenue Recognition - The Company enters into contracts with its customers that generally represent purchase orders specifying general terms and conditions, order quantities and per unit product prices. The Company has determined that each unit of product purchased represents a separate performance obligation. The Company satisfies its performance obligations and recognizes revenue at a point in time when control of a unit of product is transferred to the customer. Revenue is measured as the amount of consideration the Company expects to receive in exchange for transferring products. For most product sales, transfer of control occurs when the products are shipped from the Company’s manufacturing facility to the customer. The cost of delivering products to the Company’s customers is recorded as a component of cost of products sold. Those costs may include the amounts paid to a third party to deliver the products. Any freight costs billed to and paid by a customer are included in revenue.

​

​

F-10

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

Note 2.                 Summary of Significant Accounting Policies (continued)

The Company considers collectability of amounts due under a contract to be probable upon inception of a sale based on an evaluation of the credit worthiness of each customer. The Company sells its products typically under agreements with payment terms less than 45 days. The Company does not typically include extended payment terms or significant financing components in contracts with customers. The majority of the Company’s contracts have an obligation to transfer products within one year. Thus, the Company elects to use the practical expedient where incremental cost of obtaining a contract, such as commissions, is expensed when incurred because the amortization period for those costs is one year or less. The Company treats shipping and handling activities that occur after control of the product transfers as fulfillment activities, and therefore, does not account for shipping and handling costs as a separate performance obligation. Customer deposits are funds received in advance from customers and are recognized as revenue when the Company has transferred control of product to the customer. Product revenues are recognized upon shipment of goods as the customer has assumed the significant risks and rewards of ownership and the Company is entitled to payment at this point. Service revenues are recognized upon completion as the customer cannot realize the benefit of the service until fully completed.

​

During 2021 and 2020, revenue from the Photonics market exceeded 99%of total revenue. The balance of the revenue in each period was from the solar and thin film battery markets. The top two customers represented 84% of total revenue during 2021 and 2020. International shipments resulted in 2% and 4% of total revenue for 2021 and 2020, respectively.

​

I.Stock Based Compensation - Compensation cost for all stock-based awards is based on the grant date fair value and is recognized over the required service (vesting) period. Non cash stock-based compensation expense was $47,903 and $124,720 for the years ended December 31, 2021, and 2020, respectively. Non cash stock-based compensation expense includes $29,963 and $119,992 for stock grants awarded to the non-employee board members during 2021 and 2020. Unrecognized compensation expense was $6,305 as of December 31, 2021, and will be recognized through 2023. There was no tax benefit recorded for this compensation cost as the expense primarily relates to incentive stock options that do not qualify for a tax deduction until, and only if, a qualifying disposition occurs.

​

J.Research and Development - Research and development costs are expensed as incurred. Research and development expense for the years ended December 31, 2021 and 2020, was $235,679 and $337,823, respectively. The Company continues to invest in developing new products for all our markets including transparent conductive oxide systems for the solar and display markets as well as with our transparent electronic products. These products involve research and development expense to accelerate to market.

​

K.Income Taxes – Income Taxes are accounted for under the asset and liability method, which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements. Under this method, we determine deferred tax assets and liabilities on the basis of the differences between the financial statement and tax bases of assets and liabilities by using enacted tax rates in effect for the year in which the differences are expected to reverse. The effect of a change in tax rates on deferred tax assets and liabilities is recognized in income in the period that includes the enactment date.

​

We recognize deferred tax assets to the extent that we believe that these assets are more likely than not to be realized. In making such a determination, we consider all available positive and negative evidence, including future reversals of existing taxable temporary differences, projected future taxable income, tax-planning strategies, and results of recent operations. If we determine that we would not be able to realize our deferred tax assets in the future, we would make an adjustment to the deferred tax asset valuation allowance, which would increase the provision for income taxes.

F-11

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

Note 2.                 Summary of Significant Accounting Policies (continued)

L.Use of Estimates - The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Estimates are used for, but not limited to, the accounting for the allowance for doubtful accounts, inventory allowances, property and equipment depreciable lives, patents and licenses useful lives, revenue recognition, tax valuation allowance, stock-based compensation and assessing changes in which impairment of certain long-lived assets may occur. Actual results could differ from those estimates.

​

M.Recent Accounting Pronouncements –

​

In June 2016, the FASB issued ASU No. 2016-13 “Credit Losses - Measurement of Credit Losses on Financial Instruments.” ASU No. 2016-13 significantly changes how entities will measure credit losses for most financial assets, including accounts and notes receivables, by replacing today’s “incurred loss” approach with an “expected loss” model under which allowances will be recognized based on expected rather than incurred losses. ASU No. 2016-13 will become effective for the Company in the first quarter of 2023. The Company is evaluating the impact that the adoption of this update will have on its financial statements.

​

N.Employee Retention Credit (“ERC”) - The Company qualified for federal government assistance through ERC provisions of the Consolidated Appropriations Act of 2021 during the current fiscal year in the amount of $255,507 for the first quarter of 2021, $151,701 for the second quarter of 2021, and $153,713 for the third quarter of 2021. The purpose of the ERC is to encourage employers to keep employees on the payroll, even if they are not working during the covered period because of the coronavirus outbreak. This credit is recorded in the Statement of Operations as an offset to payroll costs in their respective expense lines. A balance of $105,000 appears as a tax receivable on the balance sheets at December 31, 2021.

​

O.American Rescue Plan Act of 2021 (“ARP”) - This act allows eligible employers with fewer than 500 employees to qualify for a tax credit for providing paid time off for each employee receiving COVID-19 vaccinations and for any time needed to recover from the vaccine. The Company received a credit of $11,042 during the third quarter of 2021, which is recorded in the Statement of Operations as an offset to payroll costs in their respective expense lines.

​

Note 3.                 Inventories

Inventories consist of the following at December 31:

​

​

​

F-12

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

​

Note 4.                 Notes Payable

​

On April 17, 2020, the Company entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), with a principal amount of $325,300. The PPP was established under the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) and administered by the U.S. Small Business Administration (the “SBA”). The term of the PPP loan was two years. The interest rate on this loan was 1.0% per annum, which was deferred for the first six months of the term of the loan. After the initial six-month deferral period or until forgiveness of the loan was approved, the loan required monthly payments of principal and interest until maturity with respect to any portion of the PPP loan which was not forgiven. Under the terms of the CARES Act, PPP loan recipients are eligible to apply for, and be granted, forgiveness for all or a portion of loans granted under the PPP. Such forgiveness was subject to limitations and ongoing rulemaking by the SBA, based on the use of loan proceeds for payroll costs and mortgage interest, rent or utility costs and the maintenance of employee and compensation levels. The Company applied for forgiveness of the entire amount of the loan during the fourth quarter of 2020, and the SBA approved the Forgiveness Application in full during the first quarter of 2021. This amount is included in the Statement of Operations as gain on extinguishment of debt in the first quarter of 2021.

The Company had a line of credit with Huntington National Bank for $1 million which was closed during 2021. No amounts were drawn on this line of credit during 2021.

The Company commenced a line of credit with Fifth Third Bank for $1 million during August of 2021. The line of credit bears interest equal to the rate of interest per annum established by Fifth Third Bank as its Prime Rate. This line of credit has a maturity date of August 29, 2022. No amounts were drawn on this line of credit during 2021.

​

Note 5.                 Lease Obligations

Operating

The Company entered into an operating lease with a third party on March 18, 2014 for its headquarters in Columbus, Ohio. The terms of the lease include monthly payments ranging from $9,400 to $9,700 with a maturity date of November 30, 2024. The Company has the option to extend the lease period for an additional five years beyond the original expiration date. There are no restrictions or covenants associated with the lease. The lease costs were approximately $110,400 and $108,100 during the years ended December 31, 2021 and 2020, respectively.

The following is a maturity analysis, by year, of the annual undiscounted cash outflows of the operating lease liabilities as of December 31, 2021:

​

​

​

​

F-13

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

Note 6.                 Finance Leases

The Company also leases certain equipment under finance leases. Future minimum lease payments, by year, with the present value of such payments, as of December 31, 2021, are shown in the following table.

​

​

The equipment under finance lease at December 31 is included in the accompanying balance sheets as follows:

​

​

These assets are amortized over a period of ten years using the straight-line method and amortization is included in depreciation expense.

The finance leases are structured such that ownership of the leased asset reverts to the Company at the end of the lease term. Accordingly, leased assets are depreciated using the Company’s normal depreciation methods and lives. Ownership of certain assets was transferred to the Company in accordance with the terms of the leases and these assets have been excluded from the leased asset disclosure above.

During 2021 the Company was approved by Fifth Third Equipment Finance Company for an equipment line of credit not to exceed $800,000 with an implicit rate of 2.71% at time of approval. Delivery and acceptance of new production equipment was to be no later than December 31, 2021. Due to the improved cash position of the Company, management determined it was preferable to reinvest these funds directly into the purchase of the production equipment received rather than initiate a new lease. The cost of this equipment was $341,655. In addition, a deposit of $220,075 was made towards a purchase order of $440,150 for new equipment now expected to arrive during the first quarter of 2022.

​

​

Note 7.                 Common and Preferred Stock

Common Stock

During 2021, the non-employee board members received compensation of 9,165 shares of common stock of the Company. The stock had an aggregate value of $29,963 and was recorded as non-cash stock compensation expense in the financial statements.

Employees received compensation of 4,804 aggregate shares of common stock of the Company during 2021, which had an aggregate value of $13,211, and was recorded as noncash stock-based compensation expense in the financial statements. In addition, during 2021, a total of 34,733 stock options were exercised by management.

F-14

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

Note 7.                 Common and Preferred Stock (continued)

During 2020, the non-employee board members received 96,450 shares of common stock of the Company with an aggregate value of $119,992. This was recorded as non-cash stock compensation expense in the financial statements.

Preferred Stock

Shares of preferred stock authorized and outstanding at December 31, 2021 and 2020, were as follows:

​

In January 1996, the Company completed an offering of 24,152 shares of $10 stated value 1995 Series B 10% cumulative non-voting convertible preferred stock (a total of 70,000 shares were offered and 24,152 were sold). The shares were convertible to common shares at the rate of $5.00 per share. A dividend payment of $24,152 was made to preferred shareholders of record during the second quarter of 2021. The Board of Directors voted in November 2021 to authorize full redemption of 24,152 shares of the Company’s Convertible Preferred Stock, Series B (“Series B”) effective December 31, 2021. This involved cash payments of $248,766 ($10.30 per share, which includes a 3% premium to the stated value of $10 per share), plus unpaid annual dividends of $265,672 ($11.00 per share).

There were 24,152 shares of Convertible Preferred Stock, Series B outstanding at December 31, 2020. A dividend payment of $24,152 was made to preferred shareholders of record during the second quarter of 2020. The Company had accrued dividends of $265,672 at December 31, 2020, and this amount was included in Convertible Preferred Stock, Series B on the balance sheet at December 31, 2020.

Earnings Per Share

Basic income per share is calculated as income available to common shareholders divided by the weighted average of common shares outstanding. Diluted earnings per share is calculated as diluted income available to common shareholders divided by the diluted weighted average number of common shares outstanding. Diluted weighted average number of common shares gives effect to all dilutive potential common shares outstanding during the period using the treasury stock method and convertible preferred stock using the if-converted method. Diluted earnings per share exclude all diluted potential shares if their effect is anti-dilutive.

F-15

SCI ENGINEERED MATERIALS, INC.

NOTES TO FINANCIAL STATEMENTS

Note 7.                 Common and Preferred Stock (continued)

Following is a summary of employee and director outstanding stock options outstanding and preferred stock, Series B at December 31.

​

​

The following is provided to reconcile the earnings per share calculations:

​

​