SeaSpine Holdings Corp - Annual Report: 2017 (Form 10-K)
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
FORM 10-K
(Mark One)
x | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended December 31, 2017
or
o | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from to
COMMISSION FILE NO. 001-36905
SeaSpine Holdings Corporation
(EXACT NAME OF REGISTRANT AS SPECIFIED IN ITS CHARTER)
DELAWARE | 47-3251758 | |
(STATE OR OTHER JURISDICTION OF INCORPORATION OR ORGANIZATION) | (I.R.S. EMPLOYER IDENTIFICATION NO.) | |
5770 Armada Drive, Carlsbad, California | 92008 | |
(ADDRESS OF PRINCIPAL EXECUTIVE OFFICES) | (ZIP CODE) | |
REGISTRANT’S TELEPHONE NUMBER, INCLUDING AREA CODE: (760) 727-8399
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT:
Title of Each Class | Name of Exchange on Which Registered | |
Common Stock, Par Value $.01 Per Share | The Nasdaq Stock Market LLC | |
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT:
NONE
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act. Yes o
No x
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x
1
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company”, and "emerging growth company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer | o | Accelerated filer | x |
Non-accelerated filer | o (Do not check if a smaller reporting company) | Smaller reporting company | o |
Emerging growth company | x | ||
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x
As of June 30, 2017, the aggregate market value of the registrant’s common stock held by non-affiliates was approximately $109,009,256 based upon the closing sales price of the registrant’s common stock on The Nasdaq Global Select Market on such date. The number of shares of the registrant’s Common Stock, $0.01 par value, outstanding as of February 26, 2018 was 14,537,751.
DOCUMENTS INCORPORATED BY REFERENCE:
Certain portions of the registrant’s definitive proxy statement relating to its scheduled May 30, 2018 Annual Meeting of Stockholders are incorporated by reference in Part III of this report.
2
SEASPINE HOLDINGS CORPORATION
INDEX
Page Number | |
3
PART I
This Annual Report on Form 10-K (this “Form 10-K” or this “report”) contains forward-looking statements, within the meaning of the Private Securities Litigation Reform Act of 1995, that involve risks and uncertainties. Many of the forward-looking statements are located in Part II, Item 7 of this report under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Forward-looking statements provide current expectations of future events based on certain assumptions and include any statement that does not directly relate to any historical or current fact. Forward-looking statements can also be identified by words such as “future,” “anticipates,” “believes,” “estimates,” “expects,” “intends,” “plans,” “predicts,” “will,” “would,” “could,” “can,” “may,” and similar terms. Forward-looking statements are not guarantees of future performance and our actual results may differ significantly from the results discussed in the forward-looking statements. Factors that might cause such differences include, but are not limited to, those discussed in Part I, Item 1A of this report under the heading “Risk Factors,” which are incorporated herein by reference. We assume no obligation to revise or update any forward-looking statements for any reason, except as required by law.
The terms “we,” “us,” “our,” “SeaSpine” or the “Company” refer collectively to SeaSpine Holdings Corporation and its wholly-owned subsidiaries, unless otherwise stated. All information presented in this report is based on our fiscal year. Unless otherwise stated, references to particular years, quarters, months or periods refer to our fiscal years ending December 31 and the associated quarters, months and periods of those fiscal years.
ITEM 1. BUSINESS
Overview
SeaSpine is a global medical technology company focused on the design, development and commercialization of surgical solutions for the treatment of patients suffering from spinal disorders. SeaSpine has a comprehensive portfolio of orthobiologics and spinal implants solutions to meet the varying combinations of products that neurosurgeons and orthopedic spine surgeons need to perform fusion procedures on the lumbar, thoracic and cervical spine. SeaSpine’s orthobiologics products consist of a broad range of advanced and traditional bone graft substitutes that are designed to improve bone fusion rates following a wide range of orthopedic surgeries, including spine, hip, and extremities procedures. SeaSpine’s spinal implants portfolio consists of an extensive line of products to facilitate spinal fusion in minimally invasive surgery (MIS), complex spine, deformity and degenerative procedures. Expertise in both orthobiologic sciences and spinal implants product development allows SeaSpine to offer its surgeon customers a differentiated portfolio and a complete solution to meet their fusion requirements. SeaSpine currently markets its products in the United States and in over 30 countries worldwide.
SeaSpine was incorporated in Delaware on February 12, 2015 in connection with the spin-off of the orthobiologics and spinal implants business of Integra LifeSciences Holdings Corporation (Integra), a diversified medical technology company. The spin-off occurred on July 1, 2015. Our corporate offices are located at 5770 Armada Drive, Carlsbad, California.
Spine Anatomy
The spine is a column of bone and cartilage that consists of 33 interlocking bones, called vertebrae, which stack upon each other at a slight angle to form the spine’s S-shaped curve. With the exception of the bottom nine vertebrae, the vertebrae are separated by thin regions of cartilage known as intervertebral discs, which act as shock absorbers that facilitate motion and absorb stress during movement. The spine protects the spinal cord and acts as the core of the human skeleton, extending from the base of skull to the pelvis. Soft tissues, including ligaments, tendons and muscles, are attached to the vertebrae and provide stability to the vertebral segment. The spinal cord carries nerves that exit through openings between the vertebrae and deliver sensation and control to the body. Below is a diagram of the lateral view of the spine:
4
The spine consists of five regions, of which the cervical, thoracic and lumbar are the three primary regions. The cervical region consists of the seven vertebrae extending from the base of the skull to the shoulders. The thoracic, or central, region consists of the next twelve vertebrae in the middle of the back. Each vertebra in the thoracic region is connected to two ribs that protect the body’s vital organs. Below the thoracic region, the lumbar region consists of five vertebrae in the lower back and is the primary load-bearing region of the spine. The thoracic and lumbar regions are commonly referred to as thoracolumbar and many of the products and procedures to treat these regions are similar. The final two regions of the spine, the sacrum and coccyx, consist of nine naturally fused vertebrae connected to the hip bones to provide support for the spine.
In spinal fusion procedures, two or more vertebrae are fused to eliminate instability as a result of deformity, degeneration or trauma affecting the vertebrae and intervertebral discs. During the procedure, spinal implant products are used to stabilize the spine and the surgeon will often remove the damaged intervertebral disc and replace it with a bone graft substitute to allow new bone to grow and fuse the affected vertebrae together. In addition to the bone graft substitute, the surgeon may replace the removed disc with an interbody device. An interbody device may be made out of machined bone, titanium, or polyetheretherketone (PEEK), and is designed to maintain spine alignment and appropriate spacing while allowing bone to grow between the vertebrae to achieve bone fusion. Procedures that include the implantation of interbody devices are often referred to by the surgical approach used to place the interbody device in the disc space. A lateral lumbar interbody fusion uses an approach that accesses the spine from the side of the patient’s body; a posterior lateral interbody fusion uses a direct posterior approach from the patient’s back; a transforaminal lumbar interbody fusion, uses an angled approach from either the left or right side of the back; and an anterior lumbar interbody fusion uses a direct anterior approach from the patient’s front (stomach) area.
Our Competitive Strengths
We provide a broad portfolio of advanced and traditional orthobiologics and spinal implant solutions to assist our surgeon customers in treating patients suffering from spinal and other orthopedic disorders. Our executive management team has extensive experience in the spine and medical technology industries. We believe that our management team, combined with the following competitive strengths, will enable us to grow our revenue and increase our presence in the markets that we serve.
• | An extensive and differentiated offering of orthobiologics products. We offer a broad range of differentiated orthobiologics products that better positions us to meet the needs of our surgeon customers compared to our competitors who focus primarily on spinal implant products. For example, our proprietary Accell bone matrix technology is designed to provide both immediate and sustained availability of the natural array of osteoinductive bone proteins and, in addition, provides flexibility in handling as a result of its reverse-phase carrier. We estimate we have a 14% share of the demineralized bone matrices (DBM) market in the United States. |
• | A range of innovative, PEEK interbody devices that incorporate NanoMetalene, a proprietary titanium surface technology. We currently offer a wide range of sterile-packaged interbody devices that incorporate our proprietary |
NanoMetalene surface technology and we expect to continue to launch additional products incorporating NanoMetalene technology. NanoMetalene describes a sub-micron layer of commercially pure titanium molecularly bonded to a PEEK implant using a high-energy, low-temperature process referred to as atomic fusion deposition. NanoMetalene is designed to provide implants a bone-friendly titanium surface on endplates and throughout graft apertures, while retaining the benefits associated with traditional PEEK implants, such as biocompatibility, a modulus of elasticity similar to bone, and excellent radiographic visibility for post-operative imaging. We have exclusive rights to NanoMetalene technology within the spine market.
5
• | A synergistic channel strategy for orthobiologics products. We maintain a dual branding strategy that allows us to market our orthobiologics products through sales agents who carry competitive spinal implant products. For example, we market our advanced DBM product as both Accell Evo3 and OsteoSurge300, which allows sales agents who sell spinal implant products competitive with ours to continue to represent our orthobiologics products. We believe this dual branding strategy allows us to penetrate a greater number of customer accounts than we would otherwise serve if we marketed our orthobiologics products under a single brand. |
• | Our own orthobiologics design, development and manufacturing operations. While many of our spinal implant competitors source their orthobiologics products from original equipment manufacturers to supplement their spinal implant portfolio, we design and develop a majority of our orthobiologics products internally and manufacture them at our facility in Irvine, California. By controlling the manufacturing processes, we should be able to better control the cost of our products and provide operational leverage with volume increases. |
Our Strategy
Our goal is to continue to scale our business in order to enhance our market position in orthobiologics and become a leader in the spinal implant market. To achieve our goal, we are investing in the following strategies:
• | Research and development to bring new products and techniques to market. We have recently increased, and intend to continue to increase, our annual research and development spending as a percentage of revenue in an effort to drive higher revenue growth through new product sales. We plan to continue to invest resources to further expand our product portfolio and to develop additional next-generation products for our existing core product lines. We also plan to continue to work with our surgeon customers to understand their needs and develop new orthobiologics and spinal implant products that will improve clinical outcomes. We intend to make further investments in our infrastructure and we employ dedicated orthobiologics engineers and scientists with expertise in material sciences, and biology and hardware engineers with expertise in product design and development. |
• | Commercial infrastructure to further penetrate the U.S. orthobiologics and spinal implant markets and increase our focus in international markets where we currently have a presence. We have recently increased, and intend to continue to increase, the quality, size and geographic breadth of our sales management team and network of independent sales agents in the United States. To support these efforts, we are investing more in, and are developing comprehensive support for, sales agent and surgeon training and education programs. We have a hands-on cadaveric training facility in Carlsbad, California where we provide training for surgeons and sales agents. In addition, we plan to increase our presence within teaching institutions that provide spinal surgery fellowship programs to educate new surgeons on the use of our products. We believe these combined efforts will help surgeons become adept with our spinal implant products and techniques, thereby improving outcomes for their patients. Internationally, we intend to continue to focus our sales and marketing efforts on expanding and strengthening our presence in those markets where we currently have relationships with stocking distributors and to selectively expand into new markets. |
• | Clinical affairs programs to generate data on product efficacy. We plan to invest in additional clinical development programs designed to generate peer-reviewed clinical data that we believe will validate the efficacy of select orthobiologics and spinal implant solutions over competing technologies. Specifically, we believe NanoMetalene technology has advantages over existing implant materials. We have initiated studies to generate data on the unique surface characteristics of titanium and the mechanical properties and radiolucency of PEEK interbody implants, which NanoMetalene technology combines into a single device. |
• | Opportunities to enhance our product offering through strategic alliances and acquisitions. We currently market several products under distribution agreements and licenses with third-parties. We intend to continue to pursue alliances and acquisition opportunities that we believe will provide us with technologies to strengthen our market position and grow our business. |
Our Products
We offer a portfolio of orthobiologics and spinal implant products for the treatment of patients suffering from spinal and other orthopedic disorders. Information regarding the amount and percentage of total revenue contributed by our orthobiologics and spinal implant products for each of the last three fiscal years may be found in Part II, Item 7 of this report under the sections entitled “Year Ended December 31, 2017 Compared to Year Ended December 31, 2016—Revenue” and “Year Ended December 31, 2016 Compared to Year Ended December 31, 2015—Revenue” and in Part II, Item 8 of this report in the Notes to Consolidated Financial Statements in Note 12, “Segment and Geographic Information.”
6
Orthobiologics
Our orthobiologics products are used in orthopedic and dental procedures and consist of a broad range of traditional and advanced bone graft substitutes intended to address the key elements of bone regeneration - osteoinduction, osteoconduction and osteogenesis. Osteoinduction refers to the ability of an implant to stimulate bone forming cells based primarily on soluble growth factor signals. Osteoconduction refers to the ability of an implant to promote bone formation based primarily on a physical matrix or scaffold, when placed adjacent to viable bone tissue. Osteogenesis refers to the ability to promote new bone formation based primarily on the cells contained within the bone graft.
Bone graft substitutes composed of natural biologic proteins and synthetic materials are designed to reduce the amount of autologous bone grafts needed for spinal fusion procedures. Bone graft substitutes, depending on their design, can be used entirely in place of the patient’s own bone tissue, referred to as an autograft, or by extending the volume of bone graft material from the patient by combining it with the bone graft substitute.
Our orthobiologics portfolio includes particulate and fibers-based DBM, collagen ceramic matrices, demineralized cancellous allograft bone and synthetic bone void fillers. We offer our orthobiologics products in the form of putties, pastes, strips and DBM in a resorbable mesh for a range of surgical applications.
Demineralized Bone Matrix and Accell Technology
Demineralized bone matrix formulations are designed to provide proteins and other growth factors at varying stages of the bone healing process. Developed in the early 1990s, our first-generation demineralized bone matrix formulations combined particulate-demineralized bone matrix with an inert carrier engineered for easy graft handling and graft containment. The carrier is a biocompatible synthetic polymer with an advantageous property that allows the product to remain moldable at room temperature, but becomes more viscous at body temperature once implanted, which we refer to as reverse-phase. Subsequently, we developed a proprietary process to transform particulate-based demineralized bone matrix into a dispersed form in order to enhance the performance of the graft material. The result of this process was a demineralized bone matrix product that we refer to as Accell bone matrix. Accell bone matrix is an open structured, dispersed form of DBM, which increases the bioavailability of bone proteins at an earlier time in the healing cascade. Standard particulate DBM is dense and therefore the bone proteins release more slowly and in a sustained manner over time. The properties of Accell bone matrix and DBM are both desirable, which is why our advanced DBM products include both of these components to harness both the early and sustained release of bone proteins. Our Accell Evo3 and OsteoSurge 300 DBM products provide an optimized formulation of Accell bone matrix, particulate-based demineralized bone matrix, and our reverse-phase carrier. These products have a handling property for bone grafting procedures and contain three times the amount of the Accell bone matrix compared to earlier products. We believe that providing both the early-stage and late-stage accessibility of osteoinductive bone proteins provided by a composite of Accell bone matrix and the particulate-based demineralized matrix differentiates our product compared to competitive demineralized bone matrix products.
In late 2017, we conducted a limited commercial launch of our OsteoStrand™ and Strand™ Demineralized Bone Fibers product lines as well as our OsteoStrand Plus and Strand Plus product lines, which incorporate our proprietary Accell Bone Matrix. All of these products provide 100% demineralized bone fibers and are designed to facilitate and aid in fusion by maximizing osteoinductive content while providing an improved conductive matrix. The fibers were developed through a process that evaluated a variety of fiber geometries to deliver intraoperative handling and controlled expansion, to facilitate surgical placement, to maintain surgical position and to allow the fibers to better fill the surgical defect with the overriding goal to improve fusion potential.
In addition, in late 2017, we conducted a limited commercial launch of our OsteoBallast™ and Ballast™ Demineralized Bone Matrix in Resorbable Mesh product lines, which are also designed to facilitate and aid in fusion. These products, which consist of a resorbable mesh containing 100% DBM without a carrier, are designed to simplify graft placement and help prevent graft migration while maximizing DBM content. OsteoBallast is designed to provide surgeons with a simple means for delivering bone graft in posterior spine surgery that contours to the local anatomy while maintaining shape and volume under compression. The simplified technique is intended to be particularly valuable in MIS procedures, where placing the graft accurately through tubes and small incisions can be challenging.
We believe that our recently launched and existing product offerings deliver clinical value as payors and hospitals seek more cost effective orthobiologic solutions.
7
Collagen Ceramic Matrix Technologies
Our collagen ceramic matrix technology leverages a history of regenerative technology and collagen engineering. Our leading products in this category are currently marketed as IsoTis Mozaik and OsteoStrux and are engineered to provide a porous scaffold architecture and osteoconductivity. These products also support osteogenesis, as they are indicated for use with bone marrow aspirate, which contains osteogenic cells. These products are composed of highly purified beta-tricalcium phosphate granules, which provide mineral content to foster bone formation during the healing process in a framework of type-1 collagen that provides a scaffold for bone cell migration. These products are engineered with a resorption profile consistent with the rate of natural bone formation.
Other Bone Graft Substitutes
Our other bone graft substitute products consist of allograft cancellous bone scaffolds and synthetic bone void fillers.
Spinal Implants
Our spinal implant portfolio consists of an extensive line of products for spinal decompression, alignment, and stabilization. Such products are typically used to facilitate fusion in minimally invasive, complex, deformity and degenerative procedures throughout the lumbar, thoracic and cervical regions of the spine. Our products are increasingly focused on restoring adequate spinal balance and profile in the sagittal (front to back) plane, which we believe is widely recognized as an important factor to improve the quality of life in patients undergoing surgery for spinal degeneration or deformity.
Minimally Invasive Surgery
MIS procedures are less invasive than traditional open surgery procedures, and may result in reduced post-operative pain, faster rates of healing and fewer procedure complications by minimizing incision size and tissue dissection. Our surgeon customers utilize our iPassage™ MIS Retractors and NewPort™ Tube Retractors to perform MIS fusions and decompression procedures, a surgical technique used to alleviate pain caused from compression on the spinal cord or the nerves that emanate from it. During the procedure, the surgeon makes a small incision and inserts the retractor through the skin and soft tissues down to the spinal column, creating a tunnel to the spine. The retractor is kept in place to hold the muscles open throughout the procedure. Through this tunnel, the surgeon accesses the spine using small instruments and inserts implants necessary for fusion, such as the screws and rods of our NewPort and Coral® MIS solutions. Our NewPort MIS product has extended tabs for a small incision profile and offers two rod delivery options for both mini-open and percutaneous approaches. Our Coral MIS product offers a mini-open muscle splitting rod delivery option for surgeons new to MIS procedures. Our MIS portfolio also includes a comprehensive set of decompression instruments, static and expandable interbody devices, and screw systems designed to facilitate access to the treatment area while minimizing anatomical disruption.
Complex Spine and Deformity
Our spinal implant products are used in complex spine and deformity procedures involving multiple spine segments, challenging anatomy, tumors, traumatic injury and revision of previous fusion surgeries. We define deformity as any variation in the natural curvature of the spine, the most common of which is scoliosis, an abnormal lateral curvature of the spine. We offer several technologies designed to address the needs of our surgeon customers who perform complex deformity procedures and the various derotation techniques that they use to correct spine curvature. For example, our Daytona® Deformity System uses an extended tab uniplanar and polyaxial screws with multiple rod options and intuitive instrumentation to create a versatile system adaptable to surgeon preference. In 2017, we launched an extension of the Daytona Deformity System platform with an adolescent idiopathic scoliosis indication that is designed to address standard to complex deformity cases in smaller-sized patients who need a lower profile construct due to anatomy constraints. Our systems are provided in multiple configurations and materials to address patient requirements, including stainless steel, titanium alloy and cobalt chrome alloy rod options, as well as multiple rod diameters. The ability to offer products with varying rod diameter and materials provides the surgeon different rod stiffness to treat individual patients. We offer both implant- and instrument-based reduction capabilities with our extended tab and locking cap products, as well as our uniplanar and D-planar screws and rapid sequential reduction towers. Our complex spinal implant portfolio allows surgeons to combine various product lines and approaches, offering several treatment options for the most difficult cases.
8
Degenerative
Our degenerative products include systems that are typically used in open procedures. Open procedures are still the most common surgical approach and involve a midline incision followed by retraction of the skin and soft tissues. We offer an extensive portfolio of degenerative products that are designed for use in both thoracolumbar and cervical spine cases.
Our Hollywood, Hollywood VI, and Ventura NanoMetalene interbody device for transforaminal lumbar interbody
fusion procedures can be used to fuse the lumbar spine through a posterior approach that starts off to one side of the patient’s back and our Vu a∙POD™ Prime NanoMetalene® interbody device for anterior lumbar interbody fusion procedures can be used to fuse the spine through an anterior approach. Our Cambria NanoMetalene interbody device can be used to fuse the cervical spine through an anterior approach.
Thoracolumbar
We offer a comprehensive portfolio of products for the thoracic and lumbar regions of the spine, consisting of rods, screws and instrumentation to facilitate posterior lumbar fusion and a broad range of anterior, posterior and lateral interbody devices, including stand-alone, zero-profile and low-profile systems, traditional static PEEK and NanoMetalene interbody devices with various footprint and lordotic options, and parallel and lordotic expandable interbody systems. Our Mariner Posterior Fixation System is a pedicle screw system featuring modular threaded technology and accompanying instrumentation that is designed to reduce the number of trays needed for surgery and that provides surgeons with multiple intra-operative options to facilitate posterior lumbar fixation. We also offer our Malibu and Coral screw and plating systems for treating degenerative thoracolumbar spine cases.
Cervical
We offer a range of devices to treat disorders in the cervical region of the spine. Our degenerative cervical portfolio includes a full range of PEEK and NanoMetalene interbody devices in a variety of footprint and lordotic options, including stand-alone zero-profile, and low-profile systems with integrated or modular plate options. These products include our recently introduced Shoreline® Anterior Cervical Standalone System, which is designed to maximize intraoperative flexibility by offering a full complement of zero and low-profile plating options, including two-, three- and four-hole variations, as well as 10 degree lordotic implants, and our Cambria NanoMetalene anterior interbody device. In addition, we offer a variety of screw and plating systems, such as our Cabo™ ACP Anterior Cervical Plating System that combines a large graft viewing windows and a visual confirmation locking system for cervical fixation.
Product Pipeline
We are committed to supplementing our portfolio of orthobiologics and spinal implant products through continuous innovation and bringing next-generation products to the market. Our development pipeline consists of a lateral access system, instrumentation and interbody implant featuring our NanoMetalene technology, modular MIS, revision and deformity systems based on our Mariner platform technology, a footprint expanding interbody device system, and additional applications for our NanoMetalene technology, as well as extensions of our orthobiologics product offerings to further differentiate this portfolio from those of our competitors.
We plan to continue to build and update our product and technology portfolio and expect to continue to launch a similar number of products and product line extensions in both the orthobiologics and spinal implant portfolios as we have in recent years. We believe that our future success and ability to drive revenue growth depends on our ability to sustain this accelerated cadence of new and next-generation product launches and innovation.
Research and Development
We have a research and development organization dedicated to advancing our portfolio of orthobiologics and spinal implant products. Our product development efforts employ an integrated team approach that involves collaboration between surgeons, our engineers, our machinists, as well as our regulatory personnel. Total research and development expense was $12.2 million, $11.4 million and $8.4 million in 2017, 2016 and 2015, respectively.
Our product development team, in consultation with designing surgeons, formulates a design for the product and then our machinists build prototypes for testing in our prototyping development and testing operation at our Carlsbad, California facility. We use a broad scope of technologies to allow us to meet the complex engineering requirements of customers. As part of the
9
development process, spine surgeons test the implantation of the products in our in-house cadaveric laboratory, which helps us design new products intended to meet the needs of both surgeon and patient. Our team refines or redesigns the prototype as necessary based on the results of the product testing, allowing us to perform rapid iterations of the design-prototype-test development cycle. Our clinical and regulatory personnel work in parallel with our product engineering personnel to facilitate regulatory clearances of our orthobiologics and spinal implant products. We believe that these product development efforts allow us to provide solutions that respond to the needs of our surgeon customers and their patients.
We plan to develop line extensions for our innovative orthobiologics technologies that will continue to reduce the amount of autologous bone graft needed for spinal fusion procedures. Our orthobiologics research and development team has experience in biomaterial sciences and bringing next generation technologies to market.
We are also committed to developing new spinal implant products that leverage the NanoMetalene and expandable interbody platforms technology and provide next generation solutions for our existing products or extend the range of solutions that we provide. We are also committed to providing products, such as hyperlordotic cages and additional expandable technology solutions, to achieve appropriate curvature of the spine and that can improve sagittal balance, correcting the patient’s spinal alignment. We also plan to continue to develop next generation technologies that meet global demand, particularly with respect to cost and delivery methods in a manner which supports a scalable commercial model.
Sales and Distribution
We currently market and sell our products in the United States and in over 30 countries worldwide. Our United States sales organization consists of regional and territory business managers who oversee a broad network of independent orthobiologics and spinal implant sales agents that receive commissions from us based on sales that they generate. Our international sales organization consists of a sales management team that oversees a network of independent orthobiologics and spinal implant stocking distributors that purchase our products directly from us and independently sell them. During 2017, our domestic and international revenues, net accounted for 90% and 10%, respectively, of total revenue, net. Information regarding financial data by geographic segment is set forth in Part II, Item 8 of this report in the Notes to Consolidated Financial Statements in Note 12, “Segment and Geographic Information.”
In the United States, we typically consign our orthobiologics products and consign or loan our spinal implant sets to hospitals and independent sales agents, who in turn deliver them to the hospital for a single surgical procedure or leave them with hospitals that are high volume users for use in multiple procedures. Our spinal implant sets typically contain the instruments, including disposables, and spinal implants required to complete a surgery.
In international markets, we predominantly sell complete instrument and implant sets to independent stocking distributors, who consign or loan these sets to surgeons. We maintain sales and marketing personnel in Switzerland, Italy, and France to manage and support our stocking distributors in Europe and use third-party distribution facilities in Belgium and the Netherlands to support international distribution efforts.
We have recently increased, and intend to continue to increase, the quality, size and geographic breadth of our sales management team and network of independent sales agents in the United States. During 2017, we gained representation in parts of the country where we had no representation or were significantly underrepresented. We anticipate adding additional independent sales agents in the United States in 2018. With certain of the new sales agents that we bring on board in territories with a high potential for growth, we focus on entering into relationships in which they carry our spinal implants exclusively, except with respect to clinical markets that our products do not address. We believe these more exclusive relationships will allow us to grow faster and more cost effectively in these territories over the long term. As we continue to launch new products, we also plan to continue to invest in additional instrument sets and marketing and education efforts to support the expansion of our independent sales agent footprint.
To support our expansion efforts in the United States, we are investing more in, and are developing comprehensive support for, sales agent and surgeon training and education programs. To this end, we have leveraged the capacity of our hands-on cadaveric training laboratory at our Carlsbad, California facility and constructed a hands-on cadaveric training laboratory in our Wayne, Pennsylvania facility to increase the number of training opportunities for surgeons and sales agents. We believe training and education will help surgeons become adept with our spinal implant products and techniques, thereby improving outcomes for their patients
We believe the expansion of our U.S. sales efforts will provide us with opportunity for future growth as we continue to penetrate existing and new markets.
10
Internationally, we intend to continue to focus our sales and marketing efforts on expanding and strengthening our presence in those markets where we currently have relationships with stocking distributors and to selectively expand into new markets.
Suppliers and Raw Materials
In general, raw materials essential to our businesses are readily available from multiple sources. For reasons of quality assurance, availability or cost effectiveness, certain components and raw materials are available only from one supplier. Our relationships with suppliers that cannot be replaced without a material expense or delay are governed by written contracts, which are generally supply agreements. These agreements set forth the process by which we order components or raw materials, as applicable, from such suppliers (which process is either on a purchase order basis or based on quarterly or annual forecasts and in some cases require us to purchase minimum amounts) and the related fees for purchasing such components or raw materials. These agreements have terms from one to five years, but in most instances are terminable by us (and in limited instances the other party) for convenience, subject to a specified notice period, and are also terminable upon mutual agreement by the parties, by either party upon material breach by the other and by either party in the event the other party enters bankruptcy. These agreements also outline the rights of each party with respect to quality assurance, inspection and compliance with applicable law and contain what we believe to be customary indemnification provisions for commercial agreements. Each of these agreements is entered into in the ordinary course of our business, immaterial in amount and significance and not a contract upon which our business is substantially dependent. In addition, we endeavor to maintain sufficient inventory of components and raw materials so that our production will not be significantly disrupted even if a particular component or material is not available for a period of time.
Most of our biomaterial products contain material derived from human or bovine tissue. We only source our raw materials from tissue banks registered with the U.S. Food and Drug Administration (FDA) and accredited by the American Association of Tissue Banks (AATB). The donors are screened, tested and processed by the tissue banks in accordance with FDA and AATB requirements. Additionally, each donor must pass FDA-specified bacterial and viral testing before raw material is distributed to us for further processing. We receive with each donor lot a certification of the safety of the raw material from the tissue bank’s medical director. As an added assurance of safety, each lot of bone is released into the manufacturing process only after our staff of quality assurance microbiologists screen the incoming bone and serology test records. During our manufacturing process, the bone particles are subjected to our proprietary process and terminally sterilized. This process is designed to support the safety and effectiveness of our DBM products.
The collagen used in our collagen ceramic matrix products is derived only from the deep flexor tendon of cattle less than 24 months old from the United States or New Zealand. The World Health Organization classifies different types of cattle tissue for relative risk of bovine spongiform encephalopathy (BSE), transmission. Deep flexor tendon is in the lowest-risk category for BSE transmission (the same category as milk, for example) and is therefore considered to have a negligible risk of containing the agent that causes BSE (an improperly folded protein known as a prion).
Intellectual Property
We seek patent and trademark protection for our key technology, products and product improvements, both in the United States and in select foreign countries. When determined appropriate, we plan to continue to enforce and defend our patent and trademark rights. In general, however, we do not rely solely on our patent and trademark estate to provide us with any significant competitive advantages as it relates to our existing product lines.
We also rely upon trade secrets and continuing technological innovations to develop and maintain our competitive position. In an effort to protect our proprietary information, we typically require our employees, consultants and advisors to execute agreements that provide that confidential information developed or provided to the individual by us or on our behalf during the course of their relationship with us must be kept confidential, except in specified circumstances.
IsoTis OrthoBiologics, Inc., one of our subsidiaries, owns a group of patents related to the reverse-phase carrier and Accell process and materials. This patent group protects the Accell family of DBM products. The patents in this group expire over a period of time from 2017 to 2023.
We licensed three U.S. patents related to certain of our pedicle screw systems from Dr. Thomas T. Haider. The license agreement, as amended, expired when the last-to-expire licensed patent expired in December 2016. Sales of the products covered under this license agreement represented approximately 6% of our total revenue in 2017.
11
Our material registered and unregistered trademarks include: Accell®, Evo3®, Accell Evo3®, Accell Evo3®C, DynaGraft® II , IsoTis®, IsoTis OrthoBiologics®, OrthoBlast® II , Atoll™, Capistrano™, Coral®, Daytona®, Hollywood™, Malibu™, NanoMetalene®, NewPort™, Vu aPOD™, Vu aPOD™ Prime, OsteoSurge® 100 (or 300), SeaSpine®, Sierra™, Sonoma™, Shoreline® , Mariner®, TruProfile®, Ballast™, OsteoBallast™, Strand™, OsteoStrand™, SkipJack™, SkipJack Expandable Body™ and RAPID™.
Competition
The global orthobiologics and spine markets are highly competitive. We face significant competition in both of these markets from the spine divisions of large multinational medical device companies, as well as smaller, emerging players focused on product innovation. These competitors are focused on bringing new technologies to market and acquiring technologies and technology licenses that directly compete with our products or have potential product advantages that could render our products obsolete or noncompetitive.
Our primary competitors in the combined orthobiologics and spinal implant markets include Medtronic, DePuy Synthes Spine (a Johnson & Johnson company), NuVasive, Stryker, Globus Medical, K2M, Zimmer Biomet, Orthofix, RTI Surgical, Alphatec, XTANT Medical, Baxter and several smaller, biologically focused companies.
We anticipate that our currently marketed products and any future marketed products will be subject to intense competition. Many of our current competitors have significantly greater financial, manufacturing and marketing resources than we do, which could make the ability to scale our business challenging. In addition, these competitors have more tenured relationships with parties in distribution channels and we anticipate they will continue to dedicate significant resources to marketing and distributing their products and to developing and commercializing competing products. Our ability to compete will depend on our ability to launch innovative new products that demonstrate superior clinical outcomes.
Regulation
We are a manufacturer and marketer of medical devices and a tissue bank, and therefore are subject to extensive regulation by the FDA, and the Center for Medicare Services of the U.S. Department of Health and Human Services and other federal governmental agencies and, in some jurisdictions, by state and foreign governmental agencies. The regulations to which we are subject govern the introduction of new medical devices, the observance of certain standards with respect to the design, manufacture, testing, labeling, promotion and sales of devices, record maintenance, the ability to track devices, potential and actual product defect reporting, import and export of devices, and other matters.
The regulatory process of obtaining product approvals and clearances can be onerous and costly. The FDA requires, as a condition to marketing a medical device in the United States, and as applicable based on product type and classification,
that we secure a Premarket Notification clearance pursuant to Section 510(k) of the United States Federal Food, Drug, and
Cosmetic Act (FDCA) or an approved premarket approval (PMA) application (or PMA supplement). Obtaining these approvals and clearances can take up to several years and may involve preclinical studies and clinical trials. The FDA may also require a post-approval clinical trial as a condition of approval.
To perform clinical trials for significant risk devices in the United States on an unapproved product, we are required to obtain an Investigational Device Exemption from the FDA. The FDA may also require a filing for FDA approval prior to marketing products that are modifications of existing products or new indications for existing products. Moreover, after clearance/approval is given, if the product is shown to be hazardous or defective, the FDA and foreign regulatory agencies have the power to withdraw the clearance or require us to change the device, its manufacturing process or its labeling, to supply additional proof of its safety and effectiveness or to recall, repair, replace or refund the cost of the medical device.
The FDA Safety and Innovation Act of 2012 (FDASIA), which includes the Medical Device User Fee Amendments of 2012, as well as other medical device provisions, went into effect October 1, 2012. This includes performance goals and user fees paid to the FDA by medical device companies when they register and list with the FDA and when they submit an application to market a device in the United States. The FDASIA also imposes some additional requirements regarding FDA Establishment Registration and Listing of Medical Devices. All U.S. and foreign manufacturers must have a FDA Establishment Registration and complete Medical Device listings for sales in the United States.
SeaSpine manufactures medical devices derived from human tissue (demineralized bone tissue). The FDA has specific regulations governing human cells, tissues, and cellular and tissue-based products (HCT/Ps). An HCT/P is a product containing, or consisting of, human cells or tissue intended for transplantation into a human patient. Examples include bone, ligament, skin
12
and cornea. Some HCT/Ps fall within the definition of a biological product, medical device or drug regulated under the FDCA. These biologic, device or drug HCT/Ps must comply both with the requirements exclusively applicable to HCT/Ps and, in addition, with requirements applicable to biologics, devices or drugs, including premarket clearance or approval from the FDA.
Section 361 of the Public Health Service Act, authorizes the FDA to issue regulations to prevent the introduction, transmission or spread of communicable disease. HCT/Ps regulated as 361 HCT/Ps are subject to requirements relating to registering facilities and listing products with the FDA, screening and testing for tissue donor eligibility, Good Tissue Practice when processing, storing, labeling, and distributing HCT/Ps, including required labeling information, stringent record keeping, and adverse event reporting.
The AATB has issued operating standards for tissue banking. Accreditation is voluntary, but compliance with these standards is a requirement in order to become an AATB-accredited tissue establishment. In addition, some states have their own tissue banking regulations. We are licensed or have permits for tissue banking in California, Florida, New York, Maryland, and other states that require specific licensing or registration.
National Organ Transplant Act. Procurement of certain human organs and tissue for transplantation is subject to the restrictions of the National Organ Transplant Act (NOTA), which prohibits the transfer of certain human organs, including skin and related tissue for valuable consideration, but permits the reasonable payment associated with the removal, transportation, implantation, processing, preservation, quality control and storage of human tissue and skin. We reimburse tissue banks for their expenses associated with the recovery, storage and transportation of donated human tissue that they provide to us for processing. We include in our pricing structure amounts paid to tissue banks to reimburse them for their expenses associated with the recovery and transportation of the tissue, in addition to certain costs associated with processing, preservation, quality control and storage of the tissue, marketing and medical education expenses, and costs associated with development of tissue processing technologies. NOTA payment allowances may be interpreted to limit the amount of costs and expenses that we may recover in our pricing for our products, thereby reducing our future revenue and profitability.
Postmarket Requirements. After a device is cleared or approved for commercial distribution, numerous regulatory requirements apply. These include, but are not limited to, the FDA’s Quality System Regulations which cover the procedures and documentation of the design, testing, production processes, controls, quality assurance, labeling, packaging, storage and shipping of medical devices; the FDA’s general prohibition against promoting products for off-label uses; the Federal Medical Device Reporting regulation, which requires that manufacturers provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or that a malfunction occurred which would be likely to cause or contribute to a death or serious injury upon recurrence; and the Reports of Corrections and Removals regulation, which requires manufacturers to report recalls and field corrective actions to the FDA if initiated to reduce a risk to health posed by the device or to remedy a violation of the FDCA.
We are also required to register with the FDA as a medical device manufacturer. As such, our manufacturing sites are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulations. These regulations require that we manufacture our products and maintain our documents in a prescribed manner with respect to design, manufacturing, testing and control activities. Further, we are required to comply with various FDA requirements and other legal requirements for labeling and promotion. If the FDA believes that a company is not in compliance with applicable regulations, it may issue a warning letter, institute proceedings to detain or seize products, issue a recall order, impose operating restrictions, enjoin future violations and assess civil penalties against that company, its officers or its employees and may recommend criminal prosecution to the U.S. Department of Justice (DOJ). Similar requirements to those outlined above also apply to tissue products.
Medical device regulations also are in effect in many of the countries in which we do business outside the United States. These laws range from comprehensive medical device approval and quality system requirements for some or all of our medical device products to simpler requests for product data or certifications. The number and scope of these requirements are increasing. Under the EU Medical Devices Directive, medical devices must meet the Medical Devices Directive requirements and receive CE Mark Certification prior to marketing in the EU. CE Mark Certification requires a comprehensive quality system program, comprehensive technical documentation and data on the product, which are then reviewed by a Notified Body. A Notified Body is an organization designated by the national governments of the EU member states to make independent judgments about whether a product complies with the requirements established by each CE marking directive. The Medical Devices Directive and ISO 13485 are recognized international quality standards that are designed to ensure that we develop and manufacture quality medical devices. Other countries are also instituting regulations regarding medical devices. Compliance with these regulations requires extensive documentation and clinical reports for all of our products, revisions to labeling, and other requirements such as facility inspections to comply with the registration requirements. A recognized Notified Body audits our facilities annually to verify our compliance with these standards.
13
In the EU, our products that contain human-derived tissue, including demineralized bone material, are not medical devices as defined in the Medical Device Regulation (MDR) EU 2017/745 replacing prior directives Medical Devices Directive (93/42/EC) and 2001/83/EC respectively. They are also not medicinal products as defined in Directive 2001/83/EC. Today, regulations, if applicable, are different from one EU member state to the next. Because of the absence of a harmonized regulatory framework and the proposed regulation for advanced therapy medicinal products in the EU, the approval process for human-derived cell or tissue-based medical products may be extensive, lengthy, expensive, and unpredictable.
Certain countries, as well as the EU, have issued regulations that govern products that contain materials derived from animal sources. Regulatory authorities are particularly concerned with materials infected with the agent that causes BSE. These regulations affect our biomaterial products for the spine, which contain material derived from bovine tissue. Although we take great care to provide that our products are safe and free of agents that can cause disease, products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for prion transmission. Significant new regulations, a ban of our products, or a movement away from bovine-derived products because of an outbreak of BSE could have a material and adverse effect on our current business or our ability to expand our business. See “Risk Factors-Risks Relating to Our Regulatory Environment-Certain of our products contain materials derived from animal sources and may become subject to additional regulation.”
We are subject to laws and regulations pertaining to healthcare fraud and abuse, including anti-kickback laws and physician self-referral laws that regulate how companies in the health care industry may market their products to hospitals and health care professionals and may compete by discounting the prices of their products. The delivery of our products is subject to regulation regarding reimbursement, and federal healthcare laws apply when a customer submits a claim for a product that is reimbursed under a federally funded healthcare program. These rules require that we exercise care in structuring our sales and marketing practices and customer discount arrangements. See “Risk Factors-Risks Relating to Our Regulatory Environment-Oversight of the medical device industry might affect the way may sell medical devices and compete in the marketplace.”
Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs, import-export, laws regarding transactions in foreign countries, the FCPA and local anti-bribery and other laws regarding interactions with healthcare professionals. Among other things, these laws restrict, and in some cases prohibit, United States companies from directly or indirectly selling goods, technology or services to people or entities in certain countries. In addition, these laws require that we exercise care in structuring our sales and marketing practices in foreign countries.
Our research, development and manufacturing processes involve the controlled use of certain hazardous materials. We are subject to country-specific, federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of these materials and certain waste products. We believe that our environmental, health and safety (EHS) procedures for handling and disposing of these materials comply with the standards prescribed by the controlling laws and regulations. However, risk of accidental releases or injury from these materials is possible. These risks are managed to minimize or eliminate associated business impacts. In the event of this type of accident, we could be held liable for damages that may result, and any liability could exceed our resources. We could be subject to a regulatory shutdown of a facility that could prevent the distribution and sale of products manufactured there for a significant period of time and we could suffer a casualty loss that could require a shutdown of the facility in order to repair it, any of which could have a material and adverse effect on our business. Although we continuously strive to maintain full compliance with respect to all applicable global EHS laws and regulations, we could incur substantial costs to fully comply with future laws and regulations, and our operations, business or assets may be impacted.
In addition to the above regulations, we are and may be subject to regulation under country-specific federal and state laws, including, but not limited to, requirements regarding record keeping, and the maintenance of personal information, including personal health information. As a public company, we are subject to the securities laws and regulations, including the Sarbanes-Oxley Act of 2002. We also are subject to other present, and could be subject to possible future, local, state, federal and foreign regulations.
Reimbursement Overview
Healthcare providers that purchase medical devices generally rely on third-party payors, including the Medicare and Medicaid programs, and private payors, such as indemnity insurers, employer group health insurance programs and managed care plans, to reimburse all or part of the cost of the device. As a result, demand for our products is and will continue to be dependent in part on the coverage and reimbursement policies of these third-party and private payors. The manner in which reimbursement is sought and obtained varies based upon the type of payor involved and the setting in which the device is furnished and utilized. Reimbursement from Medicare, Medicaid and other third-party payors may be subject to periodic adjustments as a result of
14
legislative, regulatory and policy changes and budgetary pressures. Possible reductions in, or eliminations of, coverage or reimbursement by third-party and private payors, or denial of, or provision of uneconomical reimbursement for new products, as a result of these changes may affect our customers’ revenue and ability to purchase our products. Any changes in the healthcare regulatory, payment or enforcement landscape relative to our customers’ healthcare services may significantly affect our operations and revenue.
Facilities
We operate four facilities: our headquarters in Carlsbad, California, from which our orthobiologics and spinal implant products are designed, developed, and marketed and from which our more recently launched spinal implant products are inspected, kitted and distributed; a manufacturing and distribution facility in Irvine, California, from which most of our orthobiologics products are manufactured and all are distributed; office space in Wayne, Pennsylvania, where we design spinal implants and which facilitates our interactions with customers on the East Coast; and our European sales and marketing office in Lyon, France.
We inspect, kit, and distribute most of our spinal implant products through a third-party logistics provider facility in Olive Branch, Mississippi. We distribute our orthobiologics and spinal implant products in certain international markets through third-party logistics provider facilities in Belgium and the Netherlands.
Additional information regarding our facilities may be found in Part I, Item 2 of this report.
Employees
As of February 26, 2018, we had 327 employees, 40 of whom were engaged in research and development, 89 in manufacturing, 105 in sales and marketing and 93 in general and administrative activities.
Available Information
We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended, (the Exchange Act). In accordance with the Exchange Act, we file or furnish annual, quarterly and current reports, amendments to those reports, proxy statements and other information with the SEC. We make these reports and other information available free of charge on our website at www.seaspine.com under the investors page as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. All such reports were made available in this fashion during 2017.
The SEC maintains an internet site that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov. The public may read and copy any materials that we file with the SEC at the SEC’s Public Reference Room at 100 F Street, N.E., Room 1580, Washington, D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the Commission at 1-800-SEC-0330.
ITEM 1A. RISK FACTORS
You should carefully consider the risks described below, together with all of the other information included in this Form 10-K, in evaluating the Company and our common stock. If any of the risks described below actually occurs, our business, financial results, financial condition and stock price could be materially and adversely affected.
Risks Relating to our Business
We expect to incur losses for the foreseeable future and cannot assure you that we will be able to generate sufficient sales to achieve or sustain profitability.
We expect to incur losses for the foreseeable future as we dedicate significant resources to our marketing and product development strategy, including as we continue to: (i) develop new and next generation products and product line extensions (all of which we refer to as “new products”); (ii) develop new medical techniques designed to enhance the utility of our products; (iii) collect clinical data and conduct clinical studies to differentiate our products from those of our competitors and to demonstrate the value of our products to current and prospective customers and payors; (iv) add independent sales agents and stocking distributors to increase our geographic sales coverage and penetration; (v) increase product inventory to raise the likelihood of success of new product launches; and (vi) expand our marketing campaigns and surgeon education and training programs. We cannot assure you that we will ever generate sufficient revenues from our operations to achieve profitability and, even if we achieve profitability, we
15
cannot assure you that we will remain profitable over time. Our failure to achieve or maintain profitability could negatively affect the value of our securities and our ability to attract and retain personnel, raise capital, execute our business strategy or continue operations.
We operate in an industry and in market segments that are highly competitive and we may be unable to compete successfully
There is intense competition among medical device companies that serve the spinal surgery market. We compete with established medical technology companies, as well as earlier-stage companies that often have differentiated technology and potentially superior solutions for the challenges facing our neurosurgeon and orthopedic spine surgeon customers and their patients. Our primary competitors include Medtronic, DePuy Synthes Spine (a Johnson & Johnson company), NuVasive, Stryker, Globus Medical, K2M, Zimmer, Biomet, Orthofix, RTI Surgical, Alphatec, XTANT Medical, Baxter and several smaller, biologically-focused companies.
Many of our competitors may have access to greater financial, technical, research and development, marketing, manufacturing, sales, distribution, administrative, consulting and other resources than we do. Our competitors may be more effective at developing products, at differentiating their products from our and other competitor products and at designing, executing, analyzing the results of and publishing data from clinical studies. Our competitors may also have: stronger intellectual property portfolios; broader spine surgery product offerings and products supported by more extensive clinical data; more established distribution networks; entrenched relationships with surgeons; significantly greater name recognition as well as more recognizable trademarks for products similar to the products that we sell; more established relationships with healthcare providers and payors; greater experience in obtaining and maintaining FDA and other regulatory clearances or approvals for products and product enhancement; and greater experience in launching, marketing and selling products than we do. Many of our competitors specialize in a specific product or focus on a particular market segment, making it more difficult for us to increase our overall market position. The frequent introduction by competitors of products that are, or claim to be, superior to our products, or that are alternatives to our existing or planned products may also create market confusion that may make it difficult to differentiate the benefits of our products over competing products. In addition, the entry of multiple new products and competitors may lead some of our competitors to employ pricing strategies that could adversely affect the pricing of our products and pricing in the spine market generally.
Our competitive position depends on our ability to achieve market acceptance for our current and future products. Market acceptance for any of our products requires, among other things, that we timely secure regulatory approval; demonstrate the value of our products, both to our surgeon customers and payors, which may require that we collect clinical data and/or conduct clinical studies; effectively educate and train our surgeon customers and their staff on the proper use of our products; obtain and maintain coverage and adequate reimbursement for our products, both within and outside the U.S., including under Medicare and Medicaid and from private payors; attract and retain a network of independent sales agents and stocking distributors focused on neurosurgeons and orthopedic spine surgeons; develop and execute an effective marketing strategy; protect the proprietary positions of our products, including through patent protection; and consistently produce quality products in sufficient quantities to meet demand. There are significant risks associated with each of these activities and other activities required to achieve market acceptance of both our current and future products, some of which are more fully described elsewhere in this “Risk Factors” section.
In addition, at any time our current competitors or other companies may develop alternative treatments, products or procedures for the treatment of spine disorders that compete directly or indirectly with our products, including ones that prove to be superior to our products.
For these reasons, we may not be able to compete successfully against our existing or potential competitors. Any such failure could lead us to modify our strategy, to lower our prices, or to increase the commissions we pay on sales of our products and could have a significant adverse effect on our business, financial condition and results of operations. If we are unable to compete effectively, our sales and operating results may suffer.
To be commercially successful, we must effectively demonstrate to neurosurgeon and orthopedic spine surgeons the merits of our products compared to those of our competitors.
Neurosurgeons and orthopedic spine surgeons play a significant role in determining the course of treatment and, ultimately, the product used to treat a patient. As a result, our success depends, in large part, on demonstrating to these surgeons the value of our products in the treatment of their patients. To do so requires that we, along with our independent sales agents and stocking distributors, demonstrate the merits of our products and underlying technology compared to those of our competitors. Surgeons who do not use our products may be hesitant to do so for the following or other reasons:
• | lack of experience with our products, techniques, or technologies, or with the equipment necessary to use any |
16
of the foregoing;
• | existing relationships with those who sell competitive products; |
• | the time required for surgeon and medical staff education and training on new products, techniques and equipment and technologies; |
• | lack or perceived lack of clinical evidence supporting patient benefit relative to competing products; |
• | our products not being included on hospital formularies, in integrated delivery networks or on group purchasing organization preferred vendor lists; |
• | less attractive coverage and/or reimbursement within healthcare payment systems for our products and procedures compared to other products and procedures; |
• | other costs associated with the introduction of new products and the equipment necessary to use new products; and |
• | perceived risk of liability that could be associated with the use of new products, techniques or technologies. |
In addition, we believe recommendations and support of our products by influential neurosurgeons and orthopedic spine surgeons are essential for market acceptance and adoption. If we do not receive support from such surgeons or long-term data does not show the benefits of using our products, surgeons may not use our products.
If we are not successful in convincing surgeons of the merits of our products, we may be unable to maintain or grow our sales or achieve or sustain profitability.
We must successfully educate and train surgeons and their staff on the proper use of our products.
Although most neurosurgeons and orthopedic spine surgeons may have adequate knowledge on how to use most of our products based on their clinical training and experience, we believe that the most effective way to introduce and build market demand for our products is by directly training such surgeons in the use of our products. Convincing surgeons to dedicate the time and energy necessary for adequate training is challenging, and we cannot assure you we will be successful in these efforts. If surgeons are not properly trained, they may not use our products, and, as a result, we may be unable to maintain or grow our sales or achieve or sustain profitability. If surgeons are not properly trained they may also misuse or ineffectively use our products, which may result in unsatisfactory patient outcomes, patient injury, negative publicity or lawsuits against us, any of which could have a significant adverse effect on our business, financial condition and results of operations.
Although we believe our training methods for surgeons are conducted in compliance with FDA and other applicable regulations developed both nationally and in third countries, if the FDA or other regulatory agency determines that our training constitutes promotion of an unapproved use or promotion of an intended purpose not covered by the current CE mark affixed to our products or FDA approved labeling, they could request that we modify our training or subject us to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, civil fine and criminal penalty. See also “Oversight of the medical device industry might affect the way we sell medical devices and compete in the marketplace" below.
Changes in third-party payment systems and in the healthcare industry may require us to decrease the selling price for our products, may reduce the size of the market for our products, or may eliminate a market, any of which could have a material and adverse effect on our financial performance.
Our operations may be substantially affected by fundamental changes in the political, economic and regulatory landscape of the healthcare industry. Government and private sector initiatives to limit the growth of healthcare costs are continuing in the U.S., and in many other countries where we do business, causing the marketplace to put increased emphasis on the delivery of more cost-effective treatments. These initiatives include price regulation, competitive pricing, coverage and payment policies, comparative effectiveness of therapies, technology assessments and managed-care arrangements.
Maintaining and growing sales of our products depends on the availability of adequate coverage and reimbursement from third-party payors, both within and outside the U.S., including government programs such as Medicare and Medicaid, private insurance plans and managed care organizations. Hospitals and other healthcare providers that purchase our products generally rely on third-party payors to cover all or part of the costs associated with the procedures performed with our products, including the cost to purchase our product. Both the patients’ and our customers’ access to adequate coverage and reimbursement for the procedures performed with our products by government and private insurance plans is central to the acceptance of our current and future products. We may be unable to sell our products on a profitable basis, or at all, if third-party payors deny coverage or reduce their levels of payment. In addition, if our cost of production increases at a greater rate than increases in reimbursement levels for our products, our profitability may be adversely affected.
17
The healthcare industry, both within and outside the U.S., has experienced a trend toward cost containment as government and private insurers seek to control rising healthcare costs by imposing lower payment and negotiating reduced contract rates with service providers. Third-party payors continually review their coverage and reimbursement policies for procedures involving the use of our products and can, without notice, eliminate or reduce coverage or reimbursement for our products. For example, a major national third-party insurer in the U.S. recently reduced coverage (from all or most cases to limited indications) for biomechanical devices (e.g., spine cages) used in cervical fusion procedures, stating that the devices had not been shown to be more effective than bone graft. In addition, certain insurers have limited coverage for vertebral fusions in the lumbar spine and other insurers may adopt similar coverage decisions in the future. Patients covered by these insurers may be unwilling or unable to afford lumbar fusion surgeries to treat their conditions, which could materially harm or limit our ability to sell our products designed for such surgeries. Further, third-party payors of hospital services and hospital outpatient services annually revise their payment methodologies, which could result in stricter standards for or the elimination or reduction of reimbursement of hospital charges for certain medical procedures.
Further, in the U.S., a number of the provisions of the U.S. Patient Protection and Affordable Care Act (the Affordable
Care Act) and the Health Care and Education Reconciliation Act of 2010 address access to health care products and services
and establish certain fees for the medical device industry. These provisions may be modified, repealed, or otherwise invalidated,
in whole or in part. Future rulemaking could affect rebates, prices or the rate of price increases for health care products and
services, or required reporting and disclosure. We cannot predict the timing or impact of any future rulemaking or changes in
the law.
To the extent we sell our products internationally, market acceptance may depend, in part, upon the availability of coverage and reimbursement within prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country. As in the U.S., our products may not obtain coverage and reimbursement approvals in a timely manner, if at all, in a particular international market. In addition, even if we are able to obtain country-specific coverage and reimbursement approvals, we could incur considerable expense to do so. Our failure to obtain such coverage and approvals would negatively affect market acceptance of our products in the international markets in which such failure occurs and the expenses incurred in connection with obtaining such coverage and approvals could outweigh the benefits of obtaining them.
If the trend by governmental agencies and other third-party payors to reduce coverage of and/or reimbursement for procedures using our products continues, our business, results of operations and financial condition could be materially and adversely affected. Further, we cannot be certain that, under current and future payment systems, the cost of our products will be adequately incorporated into the overall cost of the procedure and, accordingly, we cannot be certain that the procedures performed with our products will be reimbursed at a cost-effective level, or at all.
Industry trends have resulted in increased downward pricing pressure on medical services and products, which may affect our ability to sell our products at prices necessary to support our current business strategy.
The trend toward healthcare cost containment and the growth of managed care organizations is placing increased emphasis on the delivery of more cost-effective medical therapies. For example:
• | There has been consolidation among healthcare facilities and purchasers of medical devices, particularly in the U.S. One of the results of such consolidation is that group purchasing organizations, integrated delivery networks and large single accounts use their market power to consolidate purchasing decisions, which in turn intensifies competition to provide products and services to healthcare providers and other industry participants, resulting in greater pricing pressures and the exclusion of certain suppliers from important market segments. For example, some group purchasing organizations negotiate pricing for its member hospitals and require us to discount, or limit our ability to increase, prices for certain of our products. |
• | Surgeons increasingly have moved from independent, out-patient practice settings toward employment by hospitals and other larger healthcare organizations, which align surgeons’ product choices with their employers’ price sensitivities and adds to pricing pressures. Hospitals have introduced and may continue to introduce new pricing structures into their contracts to contain healthcare costs, including fixed price formulas and capitated and construct pricing. |
• | Certain hospitals provide financial incentives to doctors for reducing hospital costs (known as gainsharing), rewarding physician efficiency (known as physician profiling) and encouraging partnerships with healthcare service and goods providers to reduce prices. |
• | Existing and proposed laws, regulations and industry policies, in both domestic and international markets, regulate or seek to increase regulation of sales and marketing practices and the pricing and profitability of companies in the healthcare industry. |
18
More broadly, other provisions of the Affordable Care Act could meaningfully change the way healthcare is developed and delivered in the U.S., and may adversely affect our business and results of operations. For example, the Affordable Care Act encourages hospitals and physicians to work collaboratively through shared savings programs, such as accountable care organizations, as well as other bundled payment initiatives, which may ultimately result in the reduction of medical device purchases and the consolidation of medical device suppliers used by hospitals. There are many programs and requirements for which the details have not yet been fully established or consequences not fully understood, and it is unclear what the full impact of the legislation will be. We cannot predict accurately what healthcare programs and regulations will ultimately be implemented at the U.S. federal or state level, or the effect of any future legislation or regulation in the U.S. or elsewhere. However, any changes that have the effect of reducing reimbursements for our products or reducing medical procedure volumes could have a material and adverse effect on our business, financial condition and results of operations.
Further, the proliferation of medical device sales agents that are owned, directly or indirectly, by physicians (commonly referred to as physician-owned distributorships, or PODs) could result in increased pricing pressure on our products or harm our ability to sell our products to physicians who own or are affiliated with these sales agents. These physicians derive a proportion of their revenue from selling or arranging for the sale of medical devices for use in procedures they perform on their own patients at hospitals that agree to purchase from or through the POD, or that otherwise furnish ordering physicians with income that is based, directly or indirectly, on those orders of medical devices. The number of PODs in the spine industry may continue to grow as economic pressures increase throughout the industry and as hospitals, insurers and physicians search for ways to reduce costs and, in the case of the physicians, search for ways to increase their incomes. PODs and the physicians who own, or partially own, them have significant market knowledge and access to the surgeons who use our products and the hospitals that purchase our products. Growth in the number of PODs may reduce our ability to compete effectively for business from physicians who own, or partially own, them, which could have a material and adverse effect on our business, results of operations and financial condition.
In addition, the largest device companies with multiple product franchises have increased their effort to leverage and contract broadly with customers across franchises by providing volume discounts and multi-year arrangements that could prevent our access to these customers or make it difficult (or impossible) to compete on price.
We may be unable to develop new products in a timely and consistent manner, and failure to do so may adversely affect the attractiveness of our overall product portfolio to our surgeon customers and negatively impact our sales and market share.
To be and remain competitive, we need to introduce new products and enhancements or modifications to our existing products on a regular basis and successfully respond to technological advances. Doing so is technologically challenging and involves significant risks and uncertainty. Despite substantial investments of time and resources, our research and development efforts may not result in technically feasible new products. Even if technically feasible, the anticipated time and cost of obtaining regulatory approval and/or commercializing a new product may be too great to justify continued development. In addition, competitors could develop products that are more effective, are less expensive to manufacture, are priced more competitively or are ready for commercial introduction before our products. The introduction of new products by our competitors may lead us to reduce the prices of our products, may lead to reduced margins or loss of market share, and may render our products obsolete or noncompetitive. The success of any of our new product offerings or enhancement or modification to our existing products will depend on several factors, including our ability to:
•properly identify and anticipate surgeon and patient needs;
•develop new products or enhancements or modifications in a timely manner;
•obtain the necessary regulatory approvals for new products or product enhancements or modifications in a timely manner;
•provide adequate training to potential users of new products and product enhancements or modifications;
•receive adequate reimbursement approval of third-party payors such as Medicaid, Medicare and private insurers; and
•develop an effective marketing and distribution network.
If we are unable to develop technically and commercially viable new products and enhancements or modifications to our existing products on a consistent basis and before our competitors, our prospects could be materially and adversely affected.
19
It is also important that we carefully manage our introduction of new products and enhancements or modifications to our existing products. If potential customers delay purchases until new or enhanced or modified products are available, it could negatively impact our sales. In addition, to the extent we have excess or obsolete inventory as we transition to new or enhanced or modified products, it would result in margin reducing write-offs for obsolete inventory, and our results of operations may suffer.
If we are unable to maintain and expand our network of independent sales agents and stocking distributors, we may not be able to maintain or grow our revenue.
Our ability to generate revenue depends on the sales and marketing efforts of independent sales agents and stocking distributors. Some of our independent sales agents account for a significant portion of our sales volume. If our independent sales agents and stocking distributors fail to adequately promote, market and sell our products, our sales could significantly decrease.
Further, we face significant challenges and risks in managing our geographically dispersed distribution network and retaining the independent sales agents and stocking distributors who make up that network, and as we launch new products and increase our marketing efforts with respect to existing products, we plan to expand the reach of our marketing and sales efforts and may need to hire new independent sales agents and stocking distributors. Independent sales agents and stocking distributors require significant technical expertise in various areas such as spinal care practices, spine injuries and disease, and spinal health and they require training and time to achieve full productivity. Because of the intense competition for their services, we may be unable to attract or retain qualified independent sales agents or stocking distributors or to enter into agreements with them on favorable or commercially reasonable terms, if at all. Even if we do enter into agreements with additional qualified independent sales agents or stocking distributors, it often takes 6 to 12 months for new sales agents or stocking distributors to reach full operational effectiveness and they may not generate revenue as quickly as we expect them to, commit the necessary resources to effectively market and sell our products, or ultimately be successful in selling our products. Our success will depend largely on our ability to continue to hire, train, retain and motivate qualified independent sales agents and stocking distributors. If we are unable to expand our sales and marketing capabilities domestically and internationally, if we fail to train new independent sales agents and stocking distributors adequately, or if we experience high turnover in our sales network, we may not be able to commercialize our products adequately, or at all, which would adversely affect our business, results of operations and financial condition.
Moreover, our independent sales agents and stocking distributors are not our employees, we have limited control over their activities and, generally, we do not enter into exclusive relationships with them. If one or more of them were to be retained by a competitor, whether or an exclusive or non-exclusive basis, they may divert business from us to our competitor, which could materially and adversely affect our sales.
Sales of, or the price at which we sell, our products may be adversely affected unless the safety and efficacy of our products, alone and relative to competitive products, is demonstrated in clinical studies.
Generally, we have obtained 510(k) clearance to manufacture, market and sell the products we market in the U.S. and the right to affix the CE mark to the products we market in the European Economic Area, or EEA. To date, we have not been required to generate new clinical data to support our current 510(k) clearances, CE marks, or product registrations in other countries and, accordingly, we do not have our own clinical data regarding our currently marketed products. As a result, neurosurgeons and orthopedic spine surgeons may be slow to adopt our products and we may be subject to greater regulatory and product liability risks. In addition, certain of our competitors have clinical data supporting the safety and efficacy of their products, which may place our products at a competitive disadvantage.
In part due to the increased emphasis on the delivery of more cost-effective treatments, purchasing decisions of our customers increasingly will be based on clinical data that demonstrates the value of our products or the effectiveness of our products relative to others. Conducting clinical studies is expensive and time-consuming and outcomes are uncertain. See “Risks Relating to Our Regulatory Environment-Clinical studies are expensive and subject to extensive regulation and their results may not support our product candidate claims or may result in the discovery of adverse effects,” below. We may elect not to, or may be unable to, fund the clinical studies necessary to generate the data required for all of our products to compete effectively, in part due to the breadth of our product portfolio. Currently, we do not expect to undertake such clinical studies for all of our products and only expect to do so where we anticipate the benefits will outweigh the costs on a risk-adjusted basis. However, even when we elect and are able to fund such clinical studies on one or more of our products, such studies may not be successful. Data we generate may not be consistent with our existing data and may demonstrate less favorable safety or efficacy, which could reduce demand for our products and negatively impact future sales. Neurosurgeons and orthopedic spine surgeons may be less likely to use our products if more robust, or any, clinical data supporting the safety and efficacy of competing products is available. If we are unable to or unwilling to generate clinical data supporting the safety and efficacy of our products, our business, results of operations and financial condition could be materially and adversely affected.
20
Further, future patient studies or clinical experience may indicate that treatment with our products does not improve patient outcomes.
With the passage of the American Recovery and Reinvestment Act of 2009, funds have been appropriated for the U.S. Department of Health and Human Services’ Healthcare Research and Quality to conduct comparative effectiveness research to determine the effectiveness of different drugs, medical devices, and procedures in treating certain conditions and diseases. Some of our products or procedures performed with our products could become the subject of such research. It is unknown what effect, if any, this research may have on our business. Further, future research or experience may indicate that treatment with our products does not improve patient outcomes or improves patient outcomes less than we initially expected. Such results would reduce demand for our products, affect sustainable reimbursement from third-party payers, significantly reduce our ability to achieve expected revenue, and could cause us to withdraw our products from the market and could prevent us from sustaining or increasing profitability. Moreover, if future results and experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to significant legal liability, negative publicity, and damage to our reputation, and we could experience a dramatic reduction in sales of our products, all of which would have a material adverse effect on our business, financial condition and results of operations. The spine medical device market has been particularly prone to potential product liability claims that are inherent in the testing, manufacture and sale of medical devices and products for spine surgery procedures.
If any of our manufacturing, development or research facilities are damaged and/or our manufacturing processes are interrupted, we could experience supply disruptions, lost revenues and our business could be seriously harmed.
Damage to our manufacturing, development or research facilities or disruption to our business operations for any reason, including due to natural disaster (such as earthquake, wildfires and other fires or extreme weather), power loss, communications failure, unauthorized entry or other events, such as a flu or other health epidemic, could cause us to discontinue development and/or manufacturing of some or all of our products for an undetermined period of time. In addition, our facilities would be difficult to replace and would require substantial lead time to repair or replace. The property damage and business interruption insurance coverage on these facilities that we maintain might not cover all losses under such circumstances, and we may not be able to renew or obtain such insurance in the future on acceptable terms with adequate coverage or at reasonable costs. In particular, we manufacture our orthobiologics products in one facility located in Irvine, California and any damage to that facility could adversely affect our ability to timely satisfy demand for those products. Any significant disruption to our manufacturing operations and to our ability to meet market demand likely would have an adverse impact on our sales and revenues as key stakeholders, including our independent sales agents and stocking distributors and surgeon customers, transition to what they perceive as more reliable sources of products.
We are dependent on a limited number of third-party suppliers for components and raw materials and the loss of any of these suppliers, or their inability to provide us with an adequate supply of materials that meet our quality and other requirements, could harm our business.
Outside suppliers, some of whom are sole-source suppliers, provide us with products and raw materials and components used in the manufacture of our orthobiologics and spinal implant products. We strive to maintain sufficient inventory of products, raw materials and components so that our production will not be significantly disrupted if a particular product, raw material or component is not available to us for a period of time. Any such disruption in our production could harm our reputation, business, financial condition and results of operations.
Although we believe there are alternative supply sources, replacing our current suppliers may be impractical or difficult in many instances. For example, we could have difficulty obtaining similar products from other suppliers that are acceptable to the FDA or other foreign regulatory authorities. In addition, if we are required to transition to new suppliers for certain components of our products, the use of components or materials furnished by these alternative suppliers could require us to alter our operations, and if we are required to change the manufacturer of a critical component of our products, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality and applicable regulatory requirements, which could further impede our ability to manufacture our products in a timely manner. Transitioning to a new supplier could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of our products or could require that we modify the design of those systems.
If we are unable to obtain sufficient quantities of spinal implant products, raw materials or components that meet our quality and other requirements on a timely basis for any reason, we may not be able to produce sufficient quantities of our products to meet market demand until a new or alternative supply source is identified and qualified and, as a result, we could lose customers, our reputation could be harmed and our business could suffer. In 2013, we experienced supply shortages in collagen ceramic matrix
21
bone void fillers, which adversely affected sales of our orthobiologics products, even after the supply shortage was resolved. Furthermore, an uncorrected defect or supplier’s variation in a component or raw material that is incompatible with our manufacturing, unknown to us, could harm our ability to manufacture products.
Further, under the FDA Safety and Innovation Act of 2012, or the FDASIA, which includes the Medical Device User Fee Amendments of 2012, as well as other medical device provisions, all U.S. and foreign manufacturers must have a FDA Establishment Registration and complete Medical Device listings for sales in the U.S. While we believe that our facilities materially comply with these requirements, we also source products from foreign contract manufacturers. It is possible that some of our foreign contract manufacturers will not comply with applicable requirements and choose not to register with the FDA. In such an event, we will need to determine if there are alternative foreign contract manufacturers who comply with the applicable requirements. If such a foreign contract manufacturer is a sole supplier of one of our products, there is a risk that we may not be able to source another supplier.
In addition, we rely on a small number of tissue banks accredited by the American Association of Tissue Banks for the supply of human tissue, a crucial component of our orthobiologics products that serve as bone graft substitutes. Any failure to obtain tissue from these sources or to have the tissue processed by these sources for us in a timely manner will interfere with our ability to meet demand for our orthobiologics products effectively. The processing of human tissue into orthobiologics products is labor intensive and maintaining a steady supply stream is challenging. In addition, due to seasonal changes in mortality rates, some scarce tissues used for our orthobiologics products are at times in particularly short supply. We cannot be certain that our supply of human tissue from our current suppliers will be available at current levels or will be sufficient to meet our needs or that we will be able to successfully negotiate commercially reasonable terms with other accredited tissue banks.
We are dependent on information technology and if our information technology fails to operate adequately or fails to properly maintain the integrity of our data, our business could be materially and adversely affected.
We depend significantly on sophisticated information technology, or IT, for our infrastructure and to support business decisions. Our IT needs require an ongoing commitment of significant resources to maintain, protect and enhance existing systems and to develop new systems to keep pace with new technology, evolving regulatory standards, the increasing need to protect patient and customer information and changing customer patterns. Currently, we do not have a comprehensive IT disaster recovery plan. Any significant breakdown, intrusion, interruption, corruption or destruction of any component of our IT systems could have a material and adverse effect on our business, financial condition and results of operations.
Security breaches, loss of data and other disruptions could compromise sensitive information related to our business, prevent us from accessing critical information or expose us to liability, which could adversely affect our business and our reputation.
In the ordinary course of our business, we collect and store sensitive data, including legally protected patient health information, credit card information, personally identifiable information about our employees, intellectual property, and proprietary business information. We manage and maintain our applications and data utilizing on-site systems. These applications and data encompass a wide variety of business critical information including research and development information, commercial information and business and financial information.
Although our computer and information systems are protected through physical and software safeguards, they are still vulnerable to system malfunction, computer viruses, cyber-attacks, breaches or interruptions due to employee error or malfeasance, terrorist attacks, earthquakes (and other natural disasters), fire, flood, power loss, computer systems failure, data network failure, Internet failure, or lapses in compliance with privacy and security mandates. If any of our systems were to become subject to any of the foregoing, our networks could be compromised, and the information stored there could be accessed by unauthorized parties, publicly disclosed, lost or stolen. These events could lead to the unauthorized access and result in the misappropriation or unauthorized disclosure of confidential information belonging to us or to our employees, partners, customers or suppliers. We have measures in place that are designed to detect and respond to security incidents and breaches of privacy and security mandates. The techniques used by criminal elements to attack computer systems are sophisticated, change frequently and may originate from less regulated and remote areas of the world. As a result, we may not be able to address these techniques proactively or implement adequate preventative measures. If our IT systems are compromised, due to a data breach or otherwise, we could be subject to legal claims or proceedings, liability under laws that protect the privacy of personal information, such as HIPAA, government enforcement actions and regulatory penalties, fines, damages, and enforcement actions, and we could lose trade secrets or other confidential information, the occurrence of any of which could have a material and adverse effect on our business, financial condition and results of operations. Unauthorized access, loss or dissemination could also interrupt our operations, including our ability to bill our customers, provide customer support services, conduct research and development activities, process and prepare company financial information, manage various general and administrative aspects of our business, and could damage our
22
reputation, any of which could adversely affect our business.
We expend substantial resources to comply with laws and regulations relating to public companies, and any failure to maintain compliance could subject us to regulatory scrutiny and cause investors to lose confidence in our company, which could harm our business and have a material adverse effect on our stock price.
Laws and regulations affecting public companies, including provisions of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and the Sarbanes-Oxley Act of 2002 (SOX), and the related rules and regulations adopted by the U.S. Securities and Exchange Commission (SEC), and by the Nasdaq Stock Market increase our accounting, legal and financial compliance costs and make some activities more time-consuming and costly. We cannot predict or estimate with any reasonable accuracy the total amount or timing of the costs we may incur to comply with these laws and regulations. In addition, we expect that our management and other personnel will need to divert attention from operational and other business matters to devote substantial time to these matters. For example, compliance with Section 404 of SOX, including performing the system and process documentation and evaluation necessary to issue our annual report on the effectiveness of our internal control over financial reporting and, if applicable, obtain the required attestation report from our independent registered public accounting firm, requires us to incur substantial expense and expend significant management time. Further, we (through our former parent company) have in the past discovered, and in the future may discover, areas of internal controls that need improvement. If we identify deficiencies in our internal controls that are deemed to be material weaknesses, we could become subject to scrutiny by regulatory authorities and we could lose investor confidence in the accuracy and completeness of our SEC filings, including the financial statements included therein, which could have a material adverse effect on our stock price. Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations, including the possibility of human error and circumvention by collusion or overriding of controls. Accordingly, even an effective internal control system may not prevent or detect material misstatements on a timely basis, or at all. Also, previously effective controls may become inadequate over time because of changes in our business or operating structure, and we may fail to take measures to evaluate the adequacy of and update these controls, as necessary, which could lead to a material misstatement.
In addition, new laws and regulations could make it more difficult or more costly for us to obtain certain types of insurance, including director and officer liability insurance, and we may be forced to accept reduced policy limits and coverage or incur substantially higher costs to obtain the coverage that is the same or similar to our current coverage. The impact of these events could also make it more difficult for us to attract and retain qualified persons to serve on our board of directors or on board committees, or as our executive officers.
Our business could suffer if we lose the services of key members of our senior management or fail to hire and retain other personnel on whom our business relies.
Our ability to execute our business strategy and compete in the highly competitive medical device industry depends, in part, on our ability to attract and retain highly qualified personnel. Companies in the medical device industry in general have experienced a high rate of personnel turnover. Loss of key employees, including any of our scientific, technical and managerial personnel, could adversely affect our ability to successfully execute our current business strategy, which could have a material and adverse effect on our business, results of operations and financial condition. We would be adversely affected if we fail to adequately prepare for future turnover of our senior management team. Moreover, replacing key employees may be a difficult, costly and protracted process, and we may not have other personnel with the capacity to assume all of the responsibilities of a departing employee. Competition for qualified personnel, particularly for key positions, is intense among companies in our industry, particularly in the San Diego, California area, and many of the organizations against which we compete for qualified personnel have greater financial and other resources and different risk profiles than our company, which may make them more attractive employers. All of our employees, including our management personnel, may terminate their employment with us at any time without notice. If we cannot attract and retain highly qualified personnel, as needed, we may not achieve our financial and other goals.
Moreover, future internal growth could impose significant added responsibilities on our management, and we will need to identify, recruit, maintain, motivate and integrate additional employees to manage growth effectively. If we are unable to effectively manage such growth, our expenses may increase more than expected, we may not be able to achieve our goals, and our ability to generate and/or grow revenue could be diminished.
We may have significant product liability exposure and our insurance may not cover all potential claims.
We are exposed to product liability and other claims. Spine surgery involves significant risk of serious complications, including bleeding, nerve injury, paralysis and even death. In addition, if neurosurgeons and orthopedic spine surgeons are not sufficiently trained in the use of our products, they may misuse or ineffectively use our products, which may result in unsatisfactory patient
23
outcomes or patient injury. We could become the subject of product liability lawsuits alleging that component failures, malfunctions, manufacturing flaws, design defects, or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients. In addition, the development of allograft implants and technologies for human tissue repair and treatment may entail particular risk of transmitting diseases to human recipients, and any such transmission could result in the assertion of product liability claims against us.
Product liability claims are expensive to defend, divert our management’s attention and, if we are not successful in defending the claim, can result in substantial monetary awards against us or costly settlements. Further, successful product liability claims made against one or more of our competitors could cause claims to be made against us or expose us to a perception that we are vulnerable to similar claims. Any product liability claim brought against us, with or without merit and regardless of the outcome or whether it is fully pursued, may result in: decreased demand for our products; injury to our reputation; significant litigation costs; product recalls; loss of revenue; the inability to commercialize new products or product candidates; and adverse publicity regarding our products. Any of these may have a material and adverse effect on our reputation with existing and potential customers and on our business, financial condition and results of operations.
Our existing product liability insurance coverage may be inadequate to protect us from any liabilities we might incur. If a product liability claim or series of claims is brought against us for uninsured liabilities or more than our insurance coverage, our business could suffer. In addition, a recall of some of our products, whether or not the result of a product liability claim, could result in significant costs and loss of customers.
Our insurance policies are expensive and protect us only from some risks, which will leave us exposed to significant uninsured liabilities.
We do not carry insurance for all categories of risk to which our business is or may be exposed. Some of the policies we currently maintain include general liability, foreign liability, employee benefits liability, property, umbrella, employment practices, workers’ compensation, products liability and directors’ and officers’ insurance. We do not know, however, if we will be able to maintain insurance coverage at a reasonable cost or in sufficient amounts or scope to protect us against losses. Even if we obtain insurance, a claim could exceed the amount of our insurance coverage or it may be excluded from coverage under the terms of the policy. Any significant uninsured liability may require us to pay substantial amounts, which would adversely affect our cash position and results of operations.
Our strategy could involve growth through acquisitions, which would require us to incur substantial costs and potential liabilities for which we may never realize the anticipated benefits.
We may grow our business through acquisitions, a strategy which ultimately could prove unsuccessful. Any new acquisition could result in material transaction expenses, increased interest and amortization expense, increased depreciation expense, increased operating expense and possible in-process research and development charges for acquisitions that do not meet the definition of a “business,” any of which could have a material and adverse effect on our operating results.
In addition, businesses that we acquire may not have adequate financial, disclosure, regulatory, quality or other compliance controls in place at the time we acquire them, which may create uncertainty regarding the actual condition and financial results of the acquired business and our assumptions regarding synergies and future results. Following any acquisition, we must integrate the new business, which includes incorporating it into our financial, compliance, regulatory and quality systems. Failure to timely and successfully integrate acquired businesses may result in non-compliance with regulatory or other requirements and may result in unexpected costs, including as a result of inadequate cost containment and unrealized economies of scale. In addition, acquisitions divert management and other resources, and involve other risks, including, risks associated with entering markets in which our marketing and sales personnel may have limited experience and with disruption to existing relationships with employees, suppliers, customers and sales agents, both with respect to us and the acquired company. As a result of any of the foregoing, we may not realize the expected benefit from any acquisition. If we cannot integrate acquired businesses, products or technologies, our business, financial conditions and results of operations could be materially and adversely affected.
Furthermore, as a result of acquisitions of other healthcare businesses, we may be subject to the risk of unanticipated business uncertainties, regulatory and other compliance matters or legal liabilities relating to those acquired businesses for which the sellers of the acquired businesses may not indemnify us, for which we may not be able to obtain insurance (or adequate insurance) or for which the indemnification may not be sufficient to cover the ultimate liabilities.
24
We are exposed to a variety of risks relating to our international sales and operations.
During the year ended December 31, 2017, approximately 10% of our net revenue was attributable to our international sales and operations. We are seeking to increase our international sales over the foreseeable future. Our international business operations are subject to a variety of risks, including:
• | difficulties in staffing and managing foreign and geographically dispersed operations; |
• | having to comply with various U.S. and international laws, including the U.S. Foreign Corrupt Practices Act of 1977 and anti-money laundering laws (see also, “Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs and import-export practices, laws regarding transactions in foreign countries, the Foreign Corrupt Practices Act of 1977 and local anti-bribery and other laws regarding interactions with healthcare professionals, and product registration requirements” below); |
• | having to comply with export control laws, including, but not limited to, the Export Administration Regulations and trade sanctions against embargoed countries, which are administered by the Office of Foreign Assets Control within the Department of the Treasury, as well as the laws and regulations administered by the Department of Commerce; |
• | differing regulatory requirements for obtaining clearances or approvals to market our products; |
• | changes in, or uncertainties relating to, foreign rules and regulations that may impact our ability to sell our products, perform services or repatriate profits to the United States; |
• | tariffs and trade barriers, export regulations and other regulatory and contractual limitations on our ability to sell our products in certain foreign markets; |
• | fluctuations in foreign currency exchange rates; |
• | limitations on or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries or joint ventures; |
• | differing multiple payer reimbursement regimes, government payers or patient self-pay systems; |
• | differing labor laws and standards; |
• | economic, political or social instability in foreign countries and regions; |
• | an inability, or reduced ability, to protect our intellectual property, including any effect of compulsory licensing imposed by government action; and |
• | availability of government subsidies or other incentives that benefit competitors in their local markets that are not available to us. |
Any reduction in international sales, or our failure to further develop our international markets, could have a material adverse effect on our business, results of operations and financial condition.
Our results may be impacted by changes in foreign currency exchange rates.
As a result of our international sales and operations, we generate revenues in various foreign currencies including euros, British pounds, and Swiss francs, and in U.S. dollar-denominated transactions conducted with customers who generate revenue in currencies other than the U.S. dollar. We also incur operating expenses in euros. We cannot predict accurately the consolidated effects of exchange rate fluctuations upon our future operating results because of the variability of currency exposure in our revenues and operating expenses and the potential volatility of currency exchange rates. Although we address currency risk management through regular operating and financing activities, those actions may not prove to be fully effective. In addition, for those foreign customers who purchase our products in U.S. dollars, currency exchange rate fluctuations between the U.S. dollar and the currencies in which those customers do business may have a negative effect on the demand for our products in foreign countries where the U.S. dollar has increased in value compared to the local currency. Converting our earnings from international operations to U.S. dollars for use in the U.S. can also raise challenges, including problems moving funds out of the countries in which the funds were earned and difficulties in collecting accounts receivable in foreign countries where the usual accounts receivable payment cycle is longer. To date, we have not used risk management techniques to hedge the risks associated with foreign currency exchange rate fluctuations. Even if we were to implement hedging strategies, not every exposure can be hedged and, where hedges are put in place based on expected foreign currency exchange exposure, they are based on forecasts that may vary or that may later prove to have been inaccurate. As a result, fluctuations in foreign currency exchange rates or our failure to successfully hedge against these fluctuations could have a material adverse effect on our operating results and financial condition.
25
We may be subject to damages resulting from claims that we, our employees, or our independent sales agents or stocking distributors have wrongfully used or disclosed alleged trade secrets of our competitors or are in breach of non-competition or non-solicitation agreements with our competitors.
Many of our employees were previously employed at other medical device companies, including our competitors or potential competitors, in some cases immediately prior to joining us. In addition, many of our independent sales agents and stocking distributors sell, or in the past have sold, products of our competitors. We may be subject to claims that we, our employees or our independent sales agents or stocking distributors have intentionally, inadvertently or otherwise used or disclosed trade secrets or other proprietary information of former employers or competitors. In addition, we have been and may in the future be subject to claims that we caused an employee to breach the terms of his or her non-competition or non-solicitation agreement. Litigation may be necessary to defend against these claims. Litigation is expensive, time-consuming and could divert management attention and resources away from our business. Even if we prevail, the cost of litigation could affect our profitability. If we do not prevail, in addition to any damages we might have to pay, we may lose valuable intellectual property rights or employees, independent sales agents or stocking distributors. There can be no assurance that this type of litigation or the threat thereof will not adversely affect our ability to engage and retain key employees, sales agents or stocking distributors. See also “If we are unable to maintain and expand our network of independent sales agents and stocking distributors, we may not be able to maintain or grow our revenue,” and “Our business could suffer if we lose the services of key members of our senior management or fail to hire and retain other personnel on whom our business relies,” above.
We are subject to continuing contingent liabilities of Integra.
Even after our separation from Integra, there are several significant areas where Integra’s liabilities may become our obligations. For example, under the Code and the related rules and regulations, each corporation that was a member of the Integra consolidated U.S. federal income tax reporting group during any taxable period or portion of any taxable period ending on or before the effective time of the distribution is jointly and severally liable for the U.S. federal income tax liability of the entire Integra consolidated tax reporting group for that taxable period. In addition, the Tax Matters Agreement allocates the responsibility for prior period taxes of the Integra consolidated tax reporting group between us and Integra. Pursuant to this allocation, we may be responsible for taxes that we would not have otherwise incurred, or that we would have incurred but in different amounts and/or at different times, on a standalone basis outside of the Integra consolidated group, and the amount of such taxes could be significant. If Integra is unable to pay any prior period taxes for which it is responsible, we could be required to pay the entire amount of such taxes.
We have overlapping board membership with Integra, which may lead to conflicting interests, and one of our directors continues to own a substantial amount of Integra common stock and equity awards covering Integra stock.
Several of our board members also serve as board members of Integra. Our directors who are members of Integra’s board of directors have fiduciary duties to Integra’s stockholders, as well as fiduciary duties to our stockholders. In addition, several of our directors own or have rights to acquire Integra common stock (in at least one case, a substantial amount).
As a result of the foregoing, there may be the appearance of a conflict of interest and there is the potential for a conflict of interest with respect to matters involving or affecting both companies, such as when we or Integra consider acquisitions and other corporate opportunities that may be suitable for each company. In addition, potential conflicts of interest could arise in connection with the resolution of any dispute that may arise between Integra and us regarding the terms of the agreements governing our separation from Integra, the Tax Matters Agreement or under other agreements between Integra and us, including with respect to indemnification matters. From time to time, we may enter into transactions with Integra and/or its subsidiaries or other affiliates. There can be no assurance that the terms of any such transactions will be as favorable to us, Integra or any of our or their subsidiaries or affiliates as would be the case were there no overlapping board membership or ownership interest.
Risks Relating to our Financial Results and need for Financing
Our sales volumes and our operating results may fluctuate.
Our sales volumes and our operating results, including components of operating results, such as gross margin and cost of goods sold, have fluctuated in the past and may fluctuate from time to time in the future, including over the course of a fiscal year, and such fluctuations could affect our stock price. Some of the factors that may cause these fluctuations include:
• | economic conditions worldwide, which could affect the ability of hospitals and other customers to purchase our products and could result in a reduction in elective and non-reimbursed operative procedures; |
26
• | increased competition; |
• | market acceptance of our existing products, as well as products in development, and the demand for, and pricing of, our products and the products of our competitors; |
• | costs, benefits and timing of new product introductions; |
• | the timing of or failure to obtain regulatory clearances or approvals for new products; |
• | lost sales and other expenses resulting from stoppages in our or third parties’ production, including as a result of product recalls or field corrective actions; |
• | the availability and cost of components and materials, including raw materials such as human tissue; |
• | our ability to purchase or manufacture and ship our products efficiently and in sufficient quantities to meet sales demands; |
• | the timing of our research and development expenditures; |
• | expenditures for major initiatives; |
• | reimbursement, changes in reimbursement or denials in coverage for our products by third-party payors, such as Medicare, Medicaid, private and public health insurers and foreign governmental health systems; |
• | the ability of our independent sales agents and stocking distributors to achieve expected sales targets and for new agents and stocking distributors to become familiar with our products in a timely manner; |
• | peer-reviewed publications discussing the clinical effectiveness of our products; |
• | inspections of our manufacturing facilities for compliance with the FDA's Quality System Regulations (Good Manufacturing Practices), which could result in Form 483 observations, warning letters, injunctions or other adverse findings from the FDA or equivalent foreign regulatory bodies, and corrective actions, procedural changes and other actions, including product recalls, that we determine are necessary or appropriate to address the results of those inspections, any of which may affect production and our ability to supply our customers with our products; |
• | the costs to comply with new regulations from the FDA or equivalent foreign regulatory bodies, such as the requirements to establish a unique device identification system to adequately identify medical devices through their distribution and use; |
• | the increased regulatory scrutiny of certain of our products, including products we manufacture for others, which could result in their being removed from the market; |
• | fluctuations in foreign currency exchange rates; and |
• | the impact of acquisitions, including the impact of goodwill and intangible asset impairment charges, if future operating results of the acquired businesses are significantly less than the results anticipated at the time of the acquisitions. |
In addition, we may experience meaningful variability in our sales and gross profit among quarters, as well as within each quarter, as a result of a number of factors, including but not limited to (and in addition to those listed above):
• | the number of products sold in the quarter; |
• | the unpredictability of sales of full sets of spinal implants and instruments to our international stocking distributors; and |
• | the number of selling days in the quarter. |
Our future capital needs are uncertain and we may need to raise additional funds in the future, and such funds may not be available on acceptable terms or at all.
We believe that our cash and the borrowing capacity that we have under the credit facility that we entered into in December 2015 will be sufficient to meet our projected operating requirements over the next 12 months. That said, continued expansion of our business will be expensive, and we may seek additional capital. Our capital requirements will depend on many factors, including, but not limited to:
• | the revenue generated by sales of our products; |
• | the costs associated with expanding our sales and marketing efforts; |
• | the expenses we incur in procuring, manufacturing and selling our products; |
• | the scope, rate of progress and cost of our clinical studies; |
• | the cost of obtaining and maintaining regulatory approval or clearance of our products and products in development; |
• | the costs associated with complying with state, federal and international laws and regulations; |
• | the cost of filing and prosecuting patent applications and defending and enforcing our patent and other intellectual property rights; |
27
• | the cost of defending, in litigation or otherwise, any claims that we infringe third-party patent or other intellectual property rights; |
• | the cost of enforcing or defending against non-competition claims; |
• | the number and timing of acquisitions and other strategic transactions; |
• | the costs associated with increased capital expenditures, including fixed asset purchases of instrument sets which we consign to hospitals and independent sales agents to support surgeries; and |
• | anticipated and unanticipated general and administrative expenses, including insurance expenses. |
We may seek to raise additional capital to:
• | maintain, and, where necessary, increase appropriate product inventory and spinal instruments levels; |
• | fund our operations and clinical studies; |
• | continue, and, where appropriate, increase our research and development activities; |
• | file, prosecute and defend our intellectual property rights, and defend, in litigation or otherwise, any claims that we infringe third-party patents or other intellectual property rights; |
• | address the FDA or other governmental, legal or enforcement actions and remediate underlying problems and address investigations or inquiries into sales and marketing practices from governmental agencies worldwide; |
• | commercialize our new products, if any such products receive regulatory clearance or approval for sale; and |
• | acquire companies' new products, technology or intellectual property. |
Such capital, which we may seek to raise through public or private equity offerings, issuing debt or existing, expanded or new credit facilities, or other sources, may not be available to us on favorable terms, or at all. In addition, our December 2015 credit agreement prohibits us from incurring indebtedness without the lender’s consent. If we issue equity securities to raise additional capital, our existing stockholders may experience dilution, and the new equity securities may have rights, preferences and privileges senior to those of our existing stockholders. See “Risks Relating to Owning Our Common Stock-Your percentage of ownership in us may be diluted in the future and issuances of substantial amounts of our common stock, or the perception that such issuances may occur, could cause the market price of our common stock to decline significantly, even if our business is performing well.,” and “Risks Relating to Owning Our Common Stock-We may issue preferred stock with terms that could dilute the voting power or reduce the value of our common stock,” below. If we raise additional capital through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our products, potential products or proprietary technologies, or grant licenses on terms that are not favorable to us. If we cannot raise capital on acceptable terms, we may not be able to develop or enhance our products, execute our business plan, take advantage of future opportunities or respond to competitive pressures, changes in our supplier relationships or unanticipated customer requirements. Any of these events could adversely affect our ability to achieve our business and financial goals or to achieve or maintain profitability, and could have a material and adverse effect on our business, results of operations and financial condition.
Our future financial results could be adversely affected by impairments or other charges.
We assess periodically impairment of our long-lived assets, including finite-lived intangible assets, whenever events or changes in circumstances indicate that the carrying value may not be recoverable. As of December 31, 2017, we had $35.2 million of net finite-lived intangible assets, consisting of technology and customer relationships. In addition, we continually assess the profitability of our product lines and, after such assessment, may discontinue certain products or product lines in the future. As a result, we may record impairment charges or accelerate amortization on certain technology-related intangible assets in the future. Impairment charges as a result of any of the foregoing could be significant and could have a material and adverse effect on our reported financial results for the period in which the charge is taken, which could have a material and adverse effect on the market price of our common stock.
We are required to maintain high levels of inventory, which could consume a significant amount of our resources and reduce our cash flows.
Because we maintain substantial inventory levels to meet the needs of our customers, we are subject to the risk of inventory excess, obsolescence and shelf-life expiration. Many of our spinal implant products come in sets. Each set includes a significant number of components in various sizes so that the surgeon may select the appropriate spinal implant based on the patient’s needs. In a typical surgery, not all of the implants in the set are used, and therefore certain sizes of implants placed in the set or that we purchase for replenishment inventory may become obsolete before they can be used. In addition, in order to market our products effectively, we often must provide hospitals and independent sales agents with consigned sets that typically consist of spinal implants and instruments, including products to ensure redundancy and products of different sizes. Further, our orthobiologics products have a sterilization expiration date, which ranges from one to five years, and these products may expire before they can
28
be used. If a substantial portion of our inventory is deemed excess, becomes obsolete or expires, it could have a material adverse effect on our earnings and cash flows due to the resulting costs associated with the inventory impairment charges and costs required to replace such inventory.
Certain of our historical financial information may not be representative of the results we would have achieved as an independent public company and may not be a reliable indicator of our future results.
For periods prior to our separation from Integra, financial information included in this Form 10-K may not necessarily reflect what our financial position, results of operations or cash flows would have been had we been an independent entity during the periods presented or those that we will achieve in the future. The costs and expenses reflected in these prior periods include an allocation for certain corporate functions historically provided by Integra, including shared services and infrastructure provided by Integra to us, such as costs for IT, including the costs of a multi-year global implementation of a enterprise resource planning system, accounting and legal services, real estate and facilities, corporate advertising, insurance services and related treasury, and other corporate and infrastructure services that may be different from the comparable expenses that we would have incurred had we operated as an independent public company. Financial data presented as of and for these periods does not reflect changes in our cost structure and operations as a result of operating as an independent public company, including changes in our employee base, increased costs associated with reduced economies of scale and increased costs associated with SEC reporting and requirements. Accordingly, financial data as of and for these periods should not be assumed to be indicative of what our financial condition or results of operations actually would have been as an independent public company or to be a reliable indicator of what our financial condition or results of operations actually could be in the future.
Continuing economic instability, including challenges faced by European countries, may adversely affect the ability of hospitals and other customers to access funds or otherwise have available liquidity, which could reduce orders for our products or impede our ability to obtain new customers, particularly in European markets.
Continuing economic instability, including challenges faced by European countries, may adversely affect the ability of hospitals and other customers to access funds to enable them to fund their operating budgets. As a result, hospitals and other customers may reduce budgets or put all or part of their budgets on hold or close their operations, which could have a negative effect on our sales and could impede our ability to obtain new customers, particularly in European markets. Governmental austerity policies in Europe and other markets have reduced and could continue to reduce the amount of money available to purchase medical products, including our products. If such conditions persist, they could have a material and adverse effect on our business, financial condition and results of operations.
Risks Relating to our Regulatory Environment
We are subject to stringent domestic and foreign medical device regulation and any adverse regulatory action may materially and adversely affect our financial condition and business operations.
Our products, development activities and manufacturing processes are subject to extensive and rigorous regulation by numerous federal and state government agencies, including the FDA and comparable foreign agencies. To varying degrees, each of these agencies monitors and enforces our compliance with laws and regulations governing the development, testing, manufacturing, labeling, marketing and distribution of our products. For example, we are required to comply with the FDA’s Quality System Regulation, which mandates that manufacturers of medical devices adhere to certain quality assurance standards pertaining to, among other things, validation of manufacturing processes, controls for purchasing product components and documentation practices.
In addition, we must engage in extensive recordkeeping and reporting. For example, the Federal Medical Device Reporting regulation requires us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or that a malfunction occurred that would be likely to cause or contribute to a death or serious injury upon recurrence.
Compliance with applicable regulatory requirements is subject to continual review and we must make our manufacturing facilities and records available for periodic unscheduled inspections by governmental agencies, including the FDA, state authorities and comparable agencies in other countries. If we fail to pass an FDA Quality System Regulation inspection or to comply with applicable regulatory requirements, we may receive a notice of a violation in the form of inspectional observations on Form FDA 483, a warning letter, or could otherwise be required to take corrective action and, in severe cases, we could suffer a disruption of our operations and manufacturing delays. If we fail to take adequate corrective actions, we could be subject to enforcement actions, including significant fines, suspension of approvals, seizures or recalls of products, operating restrictions and criminal prosecutions.
29
The FDA has been increasing its scrutiny of the medical device industry and the government is expected to continue to scrutinize the industry closely. Moreover, allegations may be made against us or against our suppliers, including donor recovery groups or tissue banks, claiming that the acquisition or processing of biomaterials products does not comply with applicable FDA regulations or other relevant statutes and regulations. Allegations like these could cause regulators or other authorities to investigate or take other action against us or our suppliers, or could cause negative publicity for us or our industry generally. If the FDA were to investigate us, because of an allegation or otherwise, and if the FDA were to conclude that we are not in compliance with applicable laws or regulations, or that any of our medical devices are ineffective or pose an unreasonable health risk, the FDA could ban such medical devices, detain or seize such medical devices, order a recall, repair, replacement or refund of such devices, require us to notify health professionals and others that the devices present unreasonable risks of substantial harm to the public health, restrict manufacturing and impose other operating restrictions, enjoin and restrain certain violations of applicable law pertaining to medical devices and assess civil or criminal penalties against our officers, employees or us. The FDA may also recommend prosecution to the U.S. Department of Justice. Any notice or communication from the FDA regarding a failure to comply with applicable requirements, or negative publicity or product liability claims resulting from any adverse regulatory action, could materially and adversely affect our product sales and overall business.
Further, our suppliers also are subject to a wide array of regulatory and other requirements, including quality control, quality assurance and the maintenance of records and documentation. Our suppliers may be unable to comply with these requirements and with other FDA, state and foreign regulatory requirements. We have little control over their ongoing compliance with these regulations. Their failure to comply may expose us to regulatory action and other liability, including fines and civil penalties, suspension of production, suspension or delay in new product approval or clearance, product seizure or recall, or withdrawal of product approval or clearance.
There is no guarantee that the FDA will grant 510(k) clearance or premarket approval, or that equivalent foreign regulatory authorities will grant the foreign equivalent, of our future products, and failure to obtain necessary clearances or approvals for our future products would adversely affect our ability to grow our business.
In general, unless an exemption applies, a medical device and modifications to the device or its indications must receive either premarket approval or premarket clearance from the FDA before it can be marketed in the U.S. While in the past we have received such clearances, we may not be successful in the future in receiving approvals and clearances in a timely manner, or at all. The process of obtaining approval or clearance from the FDA and comparable foreign regulatory agencies for new products, or for enhancements or modifications to existing products, could:
• | take a significant amount of time; |
• | require the expenditure of substantial resources; |
• | involve rigorous and expensive pre-clinical and clinical testing, as well as post-market surveillance; |
• | involve modifications, repairs or replacements of our products; and |
• | result in limitations on the indicated uses of our products. |
Some of our new products will require FDA 510(k) clearance or approval of a premarket approval application, or PMA, prior to being marketed. Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, including significant design and manufacturing changes, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. Similarly, modifications to PMA-approved products may require submission and approval of a supplement PMA. The FDA requires every manufacturer to determine whether a new 510(k) or supplement PMA is needed in the first instance, and the FDA has issued guidance on assessing modifications to 510(k)-cleared and PMA-approved devices to assist manufacturers with making these determinations. However, the FDA may review any such determination and the FDA may not agree with our determinations regarding whether new clearances or approvals are necessary. We have modified some of our 510(k)-cleared products and have determined, based on our understanding of FDA guidance, that certain changes did not require new 510(k) clearances. If the FDA disagrees with our determination and requires us to seek new 510(k) clearances, or PMA approval, for modifications to our previously cleared products, we may be required to stop marketing or distributing our products, we may need to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties. Significant delays in receiving clearance or approval, or the failure to receive clearance or approval for our new products would have a material and adverse effect on our ability to expand our business.
Outside the U.S., clearance or approval procedures can vary among countries and can involve additional product testing and validation and additional administrative review periods. The time required to obtain clearance or approval in other countries might differ from that required to obtain FDA clearance or approval. The regulatory process in other countries may include all of the risks to which we are exposed in the U.S., as well as other risks. Favorable regulatory action in one country does not ensure favorable regulatory action in another, but a failure or delay in obtaining regulatory clearance or approval in one country may have
30
a negative effect on the regulatory process in others. Failure to obtain clearance or approval in other countries or any delay or setback in obtaining such clearance or approval have a material and adverse effect on our business, including that our products may not be cleared or approved for all indications requested, which could limit the uses of our products and have an adverse effect on product sales.
In the EEA, we must inform the Notified Body that carried out the conformity assessment of the medical devices we market or sell in the EEA of any planned substantial change to our quality system or any change to our devices that could affect compliance with the Essential Requirements laid down in Annex I to the Medical Devices Directive or the devices’ intended purpose. The Notified Body will then assess the change and verify whether it affects the products’ conformity with the Essential Requirements or the conditions for the use of the device. If the assessment is favorable, the Notified Body will issue a new CE Certificate of Conformity or an addendum to the existing CE Certificate of Conformity attesting compliance with the Essential Requirements. If it is not, we may not be able to continue to market and sell the applicable product in the EEA, which could have a material and adverse effect on our business, results of operations and financial condition.
We cannot be certain that we will receive required approval or clearance from the FDA and foreign regulatory agencies for new products, including modifications to existing products, on a timely basis, or at all. The failure to receive approval or clearance for new on a timely basis would have a material and adverse effect on our financial condition and results of operations.
Certain of our products are derived from human tissue and are or could be subject to additional regulations and requirements.
Some of our orthobiologics products are derived from human bone tissue, and as a result are also subject to FDA and certain state regulations regarding human cells, tissues and cellular or tissue-based products, or HCT/Ps. An HCT/P is a product containing or consisting of human cells or tissue intended for transplantation into a human patient. Examples include bone, ligament, skin and cornea.
Some HCT/Ps also meet the definition of a biological product, medical device or drug regulated under the Federal Food, Drug and Cosmetic Act. Section 361 of the Public Health Service Act authorizes the FDA to issue regulations to prevent the introduction, transmission or spread of communicable disease. HCT/Ps regulated as “361 HCT/Ps” are subject to requirements relating to registering facilities and listing products with the FDA, screening and testing for tissue donor eligibility, Good Tissue Practice when processing, storing, labeling and distributing HCT/Ps, including required labeling information, stringent record keeping and adverse event reporting. These biologic, device or drug HCT/Ps must comply both with the requirements exclusively applicable to 361 HCT/Ps and, in addition, with requirements applicable to biologics, devices or drugs, including premarket clearance or approval. We have received required approvals for our products that are regulated as 361 HCT/Ps. However, there have been occasions in the past, and there could be occasions in the future, when the FDA requires us to obtain a 510(k) clearance for our products that are regulated as 361 HCT/Ps. The process of obtaining a 510(k) clearance could take time and consume resources, and the failure to receive such a clearance would render us unable to market and sell such products, which could have a material and adverse effect on our business.
The American Association of Tissue Banks has issued operating standards for tissue banking. Accreditation is voluntary, but compliance with these standards is a requirement in order to become a licensed tissue bank. In addition, some states have their own tissue banking regulations. In addition, procurement of certain human organs and tissue for transplantation is subject to the National Organ Transplant Act, or NOTA, which prohibits the transfer of certain human organs, including skin and related tissue, for valuable consideration, but permits the reasonable payment associated with the removal, transportation, implantation, processing, preservation, quality control and storage of human tissue and skin. We reimburse tissue banks for their expenses associated with the recovery, storage and transportation of donated human tissue that they provide to us for processing. We include in our pricing structure amounts paid to tissue banks to reimburse them for their expenses associated with the recovery and transportation of the tissue, in addition to certain costs associated with processing, preservation, quality control and storage of the tissue, marketing and medical education expenses and costs associated with development of tissue processing technologies. NOTA payment allowances may be interpreted to limit the amount of costs and expenses that we can recover in our pricing for our products, thereby reducing our future revenue and profitability. If we were to be found to have violated NOTA’s prohibition on the sale or transfer of human tissue for valuable consideration, we would potentially be subject to criminal enforcement sanctions, which could materially and adversely affect our results of operations.
Because of the absence of a harmonized regulatory framework and the proposed regulation for advanced therapy medicinal products in the European Union, or EU, as well as for other countries, the approval process in the EU for human-derived cell or tissue-based medical products could be extensive, lengthy, expensive and unpredictable. Among others, some of our orthobiologics products are subject to EU member states’ regulations that govern the donation, procurement, testing, coding, traceability, processing, preservation, storage and distribution of HCT/Ps. These EU member states’ regulations include requirements for
31
registration, listing, labeling, adverse-event reporting and inspection and enforcement. Some EU member states have their own tissue banking regulations. Non-compliance with various regulations governing our products in any EU member state could result in the banning of our products in such member state or enforcement actions being brought against us, which could have a material and adverse effect on our business, results of operations and financial condition.
Certain of our products contain materials derived from animal sources and may become subject to additional regulation.
Certain of our products contain material derived from bovine tissue. Products that contain materials derived from animal sources, including food, pharmaceuticals and medical devices, are subject to scrutiny in the media and by regulatory authorities. Regulatory authorities are concerned about the potential for the transmission of disease from animals to humans via those materials. This public scrutiny has been particularly acute in Japan and Western Europe with respect to products derived from animal sources, largely due to concern that materials infected with the agent that causes bovine spongiform encephalopathy, or BSE, otherwise known as mad cow disease, may, if ingested or implanted, cause a variant of the human Creutzfeldt-Jakob disease, an ultimately fatal disease with no known cure. Cases of BSE in cattle discovered in Canada and the U.S. have increased awareness of the issue in North America.
We take steps designed to minimize the risk that our products contain agents that can cause disease, such as obtaining our collagen from countries considered to be BSE-free. Nevertheless, products that contain materials derived from animals, including our products, could become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for the transmission of infectious or other agents. Significant new regulation, or a ban of our products, could have a material and adverse effect on our current business or our ability to expand our business.
Certain countries, such as Japan, China, Taiwan and Argentina, have already issued regulations that require our collagen products be processed from bovine tendon sourced from countries where no cases of BSE have occurred. The collagen raw material we use in our products is sourced from New Zealand. Our supplier has obtained approval from certain countries, including the U.S., the European Union, Japan, Taiwan, China and Argentina, for the use of such collagen raw material in products sold in those countries. If we cannot continue to obtain collagen raw material from a qualified source of tendon from a country that has never had a case of BSE, we will not be permitted to sell our collagen products in certain countries, which could have a material and adverse effect on our business, results of operations and financial condition.
Clinical studies are expensive and subject to extensive regulation and their results may not support our product candidate claims or may result in the discovery of adverse effects.
In the development of new products or new indications for, or modifications to, existing products, we may conduct or sponsor pre-clinical testing, clinical studies or other clinical research. We are currently conducting post-market clinical studies of some of our products to gather information about their performance or optimal use. The data collected from these clinical studies may ultimately be used to support additional market clearance or approval for these products or future products. If any of our new products require premarket clinical studies, these studies are expensive, the outcomes are inherently uncertain and they are subject to extensive regulation and review by numerous governmental authorities both in the U.S. and abroad, including by the FDA and, if federal funds are involved or if an investigator or site has signed a federal assurance, are subject to further regulation by the Office for Human Research Protections and the National Institutes of Health. For example, clinical studies must be conducted in compliance with FDA regulations, local regulations, and according to principles and standards collectively referred to as “Good Clinical Practices.” Failure to comply with applicable regulations could result in regulatory and legal enforcement action, including fines, penalties, suspension of studies, and also could invalidate the data and make it unusable to support a FDA submission.
Even if any of our future premarket clinical studies are completed as planned, we cannot be certain that their results will support our product candidates and/or proposed claims or that the FDA or foreign authorities and Notified Bodies will agree with our interpretation and conclusions regarding the data they generate. Success in pre-clinical studies and early clinical studies does not ensure that later clinical studies will be successful, and we cannot be sure that the results of later studies will replicate those of earlier or prior studies. The clinical study process may fail to demonstrate that our product candidates are safe and effective for the proposed indicated uses, which could cause us to abandon a product candidate and may delay development of others. Any delay or termination of our clinical studies will delay the filing of our product submissions and, ultimately, our ability to commercialize our product candidates and generate revenues. It is also possible that patient subjects enrolled in our clinical studies of our marketed products will experience adverse side effects that are not currently part of the product candidate’s profile and, if so, these findings may result in lower market acceptance, which could have a material and adverse effect on our business, results of operations and financial condition.
32
If the third parties on which we rely to conduct our clinical studies and to assist us with pre-clinical development do not perform as contractually required or expected, we may not be able to obtain regulatory clearance, approval or a CE Certificate of Conformity for or commercialize our products.
We often must rely on third parties, such as contract research organizations, medical institutions, clinical investigators and contract laboratories, to assist in conducting our clinical studies and other development activities. If these third parties do not successfully carry out their contractual duties, comply with applicable regulatory obligations or meet expected deadlines, or if these third parties need to be replaced, or if the quality or accuracy of the data they obtain is compromised due to the failure to adhere to clinical protocols, to applicable regulatory requirements or otherwise, our pre-clinical development activities and clinical studies may be extended, delayed, suspended or terminated. Under these circumstances, we may not be able to obtain regulatory clearance/approval or a CE Certificate of Conformity for, or successfully commercialize, our products on a timely basis, if at all, and our business, operating results and prospects may be materially and adversely affected.
Oversight of the medical device industry might affect the way we sell medical devices and compete in the marketplace.
The FDA, the U.S. Office of the Inspector General for the U.S. Department of Health and Human Services, the U.S. Department of Justice and other regulatory agencies actively enforce regulations prohibiting the promotion of a medical device for a use that has not been cleared or approved by the FDA. Use of a device outside its cleared or approved indications is known as “off-label” use. Physicians may prescribe our products for off-label uses, as the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. However, if a regulatory agency determines that our promotional materials, training or activities constitute improper promotion of an off-label use, the regulatory agency could request that we modify our promotional materials, training or activities, or subject us to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, civil fine and/or criminal penalties. Although our policy is to refrain from statements and activities that could be considered off-label promotion of our products, any regulatory agency could disagree and conclude that we have engaged in off-label promotion and, potentially, caused the submission of false claims. In addition, the off-label use of our products may increase the risk of injury to patients, and, in turn, the risk of product liability claims. See “Risks Relating to our Business-We may have significant product liability exposure and our insurance may not cover all potential claims,” above.
There are also multiple other laws and regulations that govern the means by which companies in the healthcare industry may market their products to healthcare professionals and may compete by discounting the prices of their products, including, for example, the federal Anti-Kickback Statute, the federal False Claims Act, the federal Health Insurance Portability and Accountability Act of 1996, state law equivalents to these federal laws that are meant to protect against fraud and abuse, the Foreign Corrupt Practices Act of 1977 and analogous laws in foreign countries. Violations of these laws are punishable by criminal and civil sanctions, including, but not limited to, penalties, fines and exclusion from participation in federal and state healthcare programs, including Medicare and Medicaid, and imprisonment. Federal and state government agencies, as well as private whistleblowers, have significantly increased investigations and enforcement activity under these laws. Although we exercise care in structuring our sales and marketing practices, customer discount arrangements and interactions with healthcare professionals to comply with these laws and regulations, we cannot provide assurance that government officials will not assert that our practices are in compliance or that government regulators or courts will interpret those laws or regulations in a manner consistent with our interpretation. Even if an investigation is not successful or is not fully pursued, we may spend considerable time and resources defending ourselves and the adverse publicity surrounding any assertion that we may have engaged in violative conduct could have a material and adverse effect on our reputation with existing and potential customers and on our business, financial condition and results of operations.
Federal and state laws are also sometimes open to interpretation, and from time to time we may find ourselves at a competitive disadvantage if our interpretation differs from that of our competitors. AdvaMed (U.S.), EucoMed (Europe), MEDEC (Canada) and MTAA (Australia), some of the principal trade associations for the medical device industry, have promulgated model codes of ethics that set forth standards by which its members should (and non-member companies may) abide in the promotion of their products in various regions. We have implemented policies and procedures for compliance consistent with those promulgated by these associations, and we train our sales and marketing personnel on our policies regarding sales and marketing practices. Nevertheless, the sales and marketing practices of our industry have been the subject of increased scrutiny from federal and state government agencies, we believe this trend will continue and that it could affect our ability to retain customers and other relationships important to our business.
For example, prosecutorial scrutiny and governmental oversight, at both the state and federal levels, over some major device companies regarding the retention of healthcare professionals have limited the manner in which medical device companies may retain healthcare professionals as consultants. Various hospital organizations, medical societies and trade associations are establishing their own practices that may require detailed disclosures of relationships between healthcare professionals and medical
33
device companies or ban or restrict certain marketing and sales practices, such as gifts and business meals. In addition, the Affordable Care Act, as well as certain state laws, require detailed disclosure of certain financial relationships, gifts and other remuneration made to certain healthcare professionals and teaching hospitals, the publicity surrounding which could have a negative impact on our relationships with our customers and ability to seek input on product design or involvement in research. As a result of laws, rules and regulations or our own or third-party policies that prohibit or restrict interactions, or the growing perception that any interaction between healthcare professionals and industry are tainted, we may be unable to engage with our healthcare professional customers in the same manner or to the same degree, or at all, as would otherwise be the case, which may adversely affect our ability to understand our customer’s needs and to incorporate into our development programs feedback that addresses these needs. If we are unable to develop and commercialize new products that address the needs of our surgeon customers and their patients, our products may not be broadly accepted in the marketplace, or at all, which would have a negative effect on our business, results of operations and financial condition.
Unfavorable media reports or other negative publicity concerning both alleged improper methods of tissue recovery from donors and disease transmission from donated tissue could limit widespread acceptance of some of our products.
Unfavorable reports of improper or illegal tissue recovery practices, both in the U.S. and internationally, as well as incidents of improperly processed tissue leading to the transmission of disease, may affect the rate of future tissue donation and market acceptance of technologies incorporating human tissue. In addition, negative publicity could cause the families of potential donors to become reluctant to agree to donate tissue to for-profit tissue processors. For example, the media has reported examples of alleged illegal harvesting of body parts from cadavers and resulting recalls conducted by certain companies selling human tissue based products affected by the alleged illegal harvesting. These reports and others could have a negative effect on our tissue regeneration business.
Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs and import-export practices, laws regarding transactions in foreign countries, the Foreign Corrupt Practices Act of 1977 and local anti-bribery and other laws regarding interactions with healthcare professionals, and product registration requirements.
Foreign governmental regulations have become increasingly stringent and more common, and we may become subject to even more rigorous regulation by foreign governmental authorities in the future. Numerous laws restrict, and in some cases prohibit, U.S. companies from directly or indirectly selling goods, technology or services to people or entities in certain countries. In addition, these laws require that we exercise care in structuring our sales and marketing practices and effecting product registrations in foreign countries. Compliance with these regulations is costly.
The U.S. Foreign Corrupt Practices Act of 1977, or FCPA, and similar anti-bribery laws in non-U.S. jurisdictions generally prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business. The FCPA also imposes accounting standards and requirements on publicly traded U.S. corporations and their foreign affiliates, which are intended to prevent the diversion of corporate funds to the payment of bribes and other improper payments. Because of the predominance of government-sponsored healthcare systems around the world, many of our customer relationships outside of the United States are with governmental entities and are therefore subject to such anti-bribery laws. Our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employee shareowners, or agents. In recent years, both the United States and foreign government regulators have increased regulation, enforcement, inspections and governmental investigations of the medical device industry, including increased United States government oversight and enforcement of the FCPA. Despite implementation of a comprehensive global healthcare compliance program, we may be subject to more regulation, enforcement, inspections and investigations by governmental authorities in the future.
Any failure to comply with applicable foreign legal and regulatory obligations could adversely affect us in a variety of ways, that include, but are not limited to: the suspension or withdrawal of our CE Certificates of Conformity; the imposition of significant criminal, civil and administrative fines and penalties, including revocation or suspension of a business license and imprisonment of individuals; denial of export privileges; seizure of shipments and restrictions on certain business activities; disgorgement and other remedial measures; disruptions of our operations; and significant management distraction.
Regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more
complex and may result in damage to our reputation with customers.
We are subject to SEC regulations that require us to determine whether our products contain certain specified minerals, referred to under the regulations as “conflict minerals,” and, if so, to perform an extensive inquiry into our supply chain, to determine whether such conflict minerals originate from the Democratic Republic of Congo or an adjoining country. We have determined
34
that certain of our products contain such specified minerals. We are continuing to conduct inquiries into our supply chain in connection with the preparation of our conflict minerals report for 2018. Compliance with these regulations has increased our costs and has been time-consuming for our management and our supply chain personnel (as well as time-consuming for our suppliers), and we expect that continued compliance will continue to require significant amounts of money and time. In addition, to the extent any of our disclosures are perceived by the market to be “negative,” it may cause customers to refuse to purchase our products. Further, if we determine to make any changes to products, processes, or sources of supply, it may result in additional costs, which may adversely affect our business, financial condition and results of operations.
We are subject to requirements relating to hazardous materials which may impose significant compliance or other costs on us.
Our research, development and manufacturing processes involve the controlled use of certain hazardous materials. For example, our allograft bone tissue processing may generate waste materials that in the U.S. are classified as medical waste. In addition, we lease facilities at which hazardous materials could have been used in the past. As a result of the foregoing, we are subject to federal, state, foreign and local laws and regulations governing the use, manufacture, storage, handling, treatment, remediation and disposal of hazardous materials and certain waste products.
Although we believe that our procedures for handling and disposing of hazardous materials comply with applicable laws as currently in effect, we cannot completely eliminate the risk of accidental contamination or injury from these materials. In addition, under some environmental laws and regulations, we could also be held responsible for all of the costs relating to any contamination at our past or present facilities and at third-party waste disposal sites, even if such contamination was not caused by us. In the event of an accident, state or federal or other applicable authorities may curtail our use of these materials and interrupt our business operations. In addition, if an accident or environmental discharge occurs, or if we discover contamination caused by prior operations, including by prior owners and operators of properties we acquire, we could be liable for cleanup obligations, damages and fines any related liability could exceed our resources. If such unexpected costs are substantial, this could significantly harm our financial condition and results of operations. We currently carry no insurance specifically covering environmental claims relating to the use of hazardous materials.
Risks Relating to our Intellectual Property
Our intellectual property rights may not provide meaningful commercial protection for our products, potentially enabling third parties to use our technology or very similar technology in ways that could reduce our ability to compete in the marketplace.
Our success will depend in part on our ability to, both in the U.S. and in foreign countries, obtain and maintain patent and other exclusivity with respect to our products; prevent third parties from infringing upon our proprietary rights; and maintain proprietary know-how and trade secrets. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage.
We own or have licensed patents that cover aspects of some of our product lines. Our patents, however, may not provide us with any significant competitive advantage. Others may challenge our patents and, as a result, our patents could be narrowed, invalidated or rendered unenforceable. Competitors may develop products similar to ours that our patents do not cover. In addition, our current and future patent applications may not result in the issuance of patents in the U.S. or foreign countries. Further, there is a substantial backlog of patent applications at the U.S. Patent and Trademark Office, and the approval or rejection of patent applications may take several years.
In an effort to protect our trade secrets and intellectual property rights, we require our employees, consultants and advisors to execute confidentiality and invention assignment agreements upon commencement of employment or consulting relationships with us. These agreements provide that, except in specified circumstances, all confidential information developed or made known to the individual during their relationship with us must be kept confidential. We cannot assure you, however, that these agreements will provide meaningful protection for our trade secrets or other proprietary information in the event of the unauthorized use or disclosure of confidential information. In addition, we cannot assure you that others will not independently develop substantially equivalent proprietary information and procedures or otherwise gain access to our trade secrets, that our trade secrets will not be disclosed or that we can otherwise protect our rights to unpatented trade secrets.
In addition to contractual measures, we try to protect the confidential nature of our proprietary information using
physical and technological security measures. Such measures may not, for example, in the case of misappropriation of a trade
secret by an employee or third party with authorized access, provide adequate protection for our proprietary information. Our
security measures may not prevent an employee or consultant from misappropriating our trade secrets and providing them to a
competitor, and recourse we take against such misconduct may not provide an adequate remedy to protect our interests fully.
35
Unauthorized parties may also attempt to copy or reverse engineer certain aspects of our products that we consider proprietary.
Enforcing a claim that a party illegally disclosed or misappropriated a trade secret can be difficult, expensive and time-consuming, and the outcome is unpredictable.
In addition, we may face claims by third parties that our agreements with employees, consultants or advisors obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations of assignment, which could result in ownership disputes regarding intellectual property we have developed or will develop and interfere with our ability to capture the commercial value of such intellectual property. Litigation may be necessary to resolve an ownership dispute, and if we are not successful, we may be precluded from using certain intellectual property or may lose our exclusive rights in that intellectual property. Either outcome could harm our business and competitive position. See “If we seek to protect or enforce our intellectual property rights through litigation or other proceedings, it could require us to spend significant time and money, the results of which are uncertain,” below.
Furthermore, the laws of some foreign countries may not protect our intellectual property rights to the same extent as the laws of the U.S., if at all. Since most of our issued patents and pending patent applications are for the U.S. only, we lack a corresponding scope of patent protection in other countries. Thus, we may not be able to stop a competitor from marketing products in other countries that are similar to some of our products.
If we are unable to obtain, protect and enforce patents on our technology and to protect our trade secrets, such inability could have a material and adverse effect on our business, results of operations and financial condition.
Our success will depend partly on our ability to operate without infringing or misappropriating the proprietary rights of others.
Our success will depend in part on our ability, both in the U.S. and in foreign countries, to operate without infringing upon the patents and proprietary rights of others, and to obtain appropriate licenses to patents or proprietary rights held by third parties if infringement would otherwise occur.
Significant litigation regarding patent rights occurs in our industry. Our competitors in both the U.S. and abroad, many of which have substantially greater resources and have made substantial investments in patent portfolios and competing technologies, may have applied for or obtained or may in the future apply for and obtain, patents that will prevent, limit or otherwise interfere with our ability to make, use and sell our products. Generally, we do not conduct independent reviews of patents issued to third parties. In addition, patent applications in the U.S. and elsewhere can be pending for many years before issuance, so there may be applications of others now pending of which we are unaware that may later result in issued patents that will prevent, limit or otherwise interfere with our ability to make, use or sell our products. The large number of patents, the rapid rate of new patent applications and issuances, the complexities of the technology involved and the uncertainty of litigation increase the risk of assets and resources including management’s attention, being diverted to patent litigation. We have received in the past, and expect to receive in the future, communications from various industry participants alleging our infringement of their patents, trade secrets or other intellectual property rights and/or offering licenses to such intellectual property. Any lawsuits resulting from such allegations could subject us to significant liability for damages and invalidate our proprietary rights. Any potential intellectual property litigation also could force us to do one or more of the following:
• | stop making, selling or using products or technologies that allegedly infringe the asserted intellectual property; |
• | lose the opportunity to license our technology to others or to collect royalty payments based upon successful protection and assertion of our intellectual property rights against others; |
• | incur significant legal expenses; |
• | pay substantial damages or royalties to the party whose intellectual property rights we may be found to be infringing; |
• | pay the attorney fees and costs of litigation to the party whose intellectual property rights we may be found to be infringing; |
• | redesign those products that contain the allegedly infringing intellectual property, which could be costly, disruptive and/or infeasible; or |
• | attempt to obtain a license to the relevant intellectual property from third parties, which may not be available on reasonable terms or at all. |
See “If we seek to protect or enforce our intellectual property rights through litigation or other proceedings, it could require us to spend significant time and money, the results of which are uncertain,” below.
Further, as the number of participants in the spine industry grows, the possibility of intellectual property infringement claims against us increases. If we are found to infringe the intellectual property rights of third parties, we could be required to pay substantial damages (which may be increased up to three times of awarded damages) and/or substantial royalties and could be prevented from
36
selling our products unless we obtain a license or are able to redesign our products to avoid infringement. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe the intellectual property rights of others. If we fail to obtain any required licenses or make any necessary changes to our products or technologies, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products, all of which could have a material adverse effect on our business, results of operations and financial condition.
In addition, we generally indemnify our customers and sales agents with respect to infringement by our products of the proprietary rights of third parties. Third parties may assert infringement claims against our customers or sales agents. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers or sales agents, regardless of the merits of these claims. If any of these claims succeed, we may be forced to indemnify, or pay damages on behalf of, our customers or sales agents or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products.
If we seek to protect or enforce our intellectual property rights through litigation or other proceedings, it could require us to spend significant time and money, the results of which are uncertain.
To protect or enforce our intellectual property rights, we may have to initiate or defend litigation against or by third parties, such as infringement suits, opposition proceedings or seeking a court declaration that we do not infringe the proprietary rights of others or that their rights are invalid or unenforceable. Litigation, including defending against claims without merit is expensive and time-consuming, and could divert management attention and resources away from our business and could harm our reputation. We may not have sufficient resources to enforce our intellectual property rights or to defend our intellectual property rights against a challenge. Even if we prevail, the cost of litigation, including the diversion of management and other resources, could affect our profitability and could place a significant strain on our financial resources.
Our ability to enforce our intellectual property rights depends on our ability to detect infringement. It may be difficult to detect infringers who do not advertise the components that are used in their products. Moreover, it may be difficult or impossible to obtain evidence of infringement in a competitor’s or potential competitor’s product. The medical device industry is characterized by the existence of a large number of patents and frequent litigation based on allegations of patent infringement. It is not unusual for parties to exchange letters surrounding allegations of intellectual property infringement and licensing arrangements. In addition, the patent positions of medical device companies, including our patent position, may involve complex legal and factual questions, and, therefore, the scope, validity and enforceability of any patent claims that we have or may obtain cannot be predicted with certainty.
Risks Relating to Owning our Common Stock
The market price of our common stock has been and likely will continue to be volatile.
The market price of our common stock is likely to be volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. In addition to the factors discussed in this “Risk Factors” section and elsewhere in this Form 10-K, these factors include:
• | actual or anticipated fluctuations in our quarterly financial condition and operating performance; |
• | introduction of new products by us or our competitors; |
• | announcements by us or our competitors of significant acquisitions or dispositions; |
• | our ability to obtain financing as needed; |
• | a shift in our investor base, including sales of our shares by existing stockholders; |
• | any major change in our board of directors or management; |
• | threatened or actual litigation or governmental investigations; |
• | the number of shares of our common stock publicly owned and available for trading; |
• | the operating and stock price performance of similar companies; |
• | changes in earnings estimates by securities analysts or our ability to meet earnings guidance; |
• | publication of research reports about us or our industry or changes in recommendations or withdrawal of research coverage by securities analysts; |
• | changes in laws or regulations affecting our business, including tax legislation; |
• | the success or failure of our business strategy; |
• | investor perception of us and our industry; |
• | changes in accounting standards, policies, guidance, interpretations or principles; |
37
• | the overall performance of the equity markets; |
• | general political and economic conditions, and other external factors. |
In addition, the stock market in general, and the stocks of medical device companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. This could limit or prevent investors from readily selling their shares and may otherwise negatively affect the liquidity of our common stock. Securities class action litigation has often been instituted against companies following periods of volatility in the overall market and in the market price of a company’s securities. This litigation, if instituted against us, could result in very substantial costs, divert our management’s attention and resources, and harm our business, financial condition and results of operation.
Your percentage of ownership in us may be diluted in the future and issuances of substantial amounts of our common stock, or the perception that such issuances may occur, could cause the market price of our common stock to decline significantly, even if our business is performing well.
As with any public company, your percentage ownership in us may be diluted in the future because of equity issuances for acquisitions and investments, capital-raising transactions or otherwise, including equity awards that we have granted and we expect to grant in the future to our directors, officers and employees. As of December 31, 2017, approximately 0.7 million shares of our common stock were subject to unvested restricted stock units and approximately 1.7 million shares of our common stock were subject to exercisable stock options with a weighted average exercise price of $14.55. In August 2016, we entered into an equity distribution agreement with Piper Jaffray & Co. (Piper Jaffray), pursuant to which we may offer and sell shares of our common stock in “at the market” (ATM) offerings (as defined in Rule 415 of the Act) having an aggregate offering price up to $25.0 million in gross proceeds from time to time through Piper Jaffray acting as sales agent. The shares offered and sold under the distribution agreement are covered by a registration statement on Form S-3 that was declared effective in August 2016. As of December 31, 2017, we had the capacity to issue additional shares of our common stock to generate up to $8.8 million of gross proceeds under the distribution agreement. Subsequent to December 31, 2017, we sold 882,332 shares of common stock at an average price per share of $10.00 and received net proceeds of approximately $8.6 million, which consumed the remaining capacity under the distribution agreement. Further, the market price of our common stock could decline as a result of the issuance, including sale, of a large number of shares of our common stock, under the distribution agreement or otherwise, and the perception that these sales could occur may also depress the market price of our common stock. A decline in the price of our common stock might impede our ability to raise capital through the issuance of additional shares of our common stock or other equity securities.
We are an “emerging growth company” and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our common stock less attractive to investors.
We are an “emerging growth company,” as defined in the JOBS Act, and we are taking advantage of certain exemptions and relief from various reporting requirements that are applicable to public companies that are not emerging growth companies. In particular, while we are an emerging growth company: (i) we will not be required to comply with the auditor attestation requirements of Section 404(b) of SOX; (ii) we will be exempt from any rules that may be adopted by the Public Company Accounting Oversight Board requiring mandatory audit firm rotations or a supplement to the auditor’s report on financial statements; (iii) we will be subject to reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements; and (iv) we will not be required to hold nonbinding advisory votes on executive compensation or stockholder approval of any golden parachute payments not previously approved.
In addition, as an emerging growth company we are not required to comply with any new or revised accounting standard applicable to public companies until such date that a private company is required to comply with such standard. We elected not to comply with such new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies, therefore our financial statements may not be comparable to the financial statements of public companies that are not emerging growth companies.
We will remain an emerging growth company until the earliest of: (i) December 31, 2020 (the fiscal year-end following the fifth anniversary of the completion of the spin-off); (ii) the end of the fiscal year in which the market value of our common stock that is held by non-affiliates exceeds $700.0 million as of the last business day of the second fiscal quarter of that year; (iii) the end of the fiscal year in which our annual revenues exceed $1.0 billion; and (iv) the date on which we issue more than $1.0 billion in nonconvertible debt in any three-year period.
Investors may find our common stock less attractive because we rely on the exemptions available to, and relief granted to, emerging growth companies by the JOBS Act, which may result in a less active trading market for our common stock and our
38
stock price may decline and/or become more volatile.
If, once we are no longer an emerging growth company, our independent registered public accounting firm cannot provide an unqualified attestation report on the effectiveness of our internal control over financial reporting, investor confidence and, in turn, the market price of our common stock, could decline.
We may issue preferred stock with terms that could dilute the voting power or reduce the value of our common stock.
While we have no specific plan to issue preferred stock, our amended and restated certificate of incorporation authorizes us to issue, without stockholder approval, one or more series of preferred stock having such designation, powers, privileges, preferences, including preferences over our common stock respecting dividends and distributions, terms of redemption and relative participation, optional, or other rights, if any, of the shares of each such series of preferred stock and any qualifications, limitations or restrictions thereof, as our board of directors may determine. The terms of one or more series of preferred stock could dilute the voting power or reduce the value of our common stock. For example, the repurchase or redemption rights or liquidation preferences we could assign to holders of preferred stock could affect the residual value of the common stock.
If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.
The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. If current or future analysts who cover us were to downgrade our stock or publish inaccurate or unfavorable research about our business, our stock price would likely decline. If one or more of these analysts were to stop covering us or were to stop regularly publishing reports on us, demand for our stock could decrease, which might cause our stock price and trading volume to decline.
We do not anticipate paying cash dividends, and accordingly, stockholders must rely on stock appreciation for any return on their investment.
We have never declared or paid cash dividends on our common stock, and we do not currently expect to declare or pay any such cash dividends in the foreseeable future. Instead, we currently intend to retain our future earnings, if any, to fund the development and growth of our business. Payment of cash dividends, if any, will depend on our financial condition, results of operations, capital requirements and other factors and will be at the discretion of our board of directors. Furthermore, we are subject to various laws and regulations that may restrict our ability to pay dividends and are subject to contractual restrictions on, or prohibitions against, the payment of dividends. Due to the foregoing, the return on your investment in our common stock will likely depend entirely upon any future appreciation and our common stock may not appreciate. Investors seeking cash dividends should not invest in our common stock.
Certain provisions in our charter documents and Delaware law could discourage takeover attempts and lead to management entrenchment and, therefore, may depress the market price of our common stock.
Our amended and restated certificate of incorporation and amended and restated bylaws contain provisions that could have the effect of delaying or preventing changes in control or changes in our management without the consent of our board of directors, including, among other things:
• | a classified board of directors with three-year staggered terms, which may delay the ability of stockholders to change the membership of a majority of our board of directors; |
• | no cumulative voting in the election of directors, which limits the ability of minority stockholders to elect director candidates; |
• | the ability of our board of directors to determine to issue shares of preferred stock and to determine the price and other terms of those shares, including preferences and voting rights, without stockholder approval, which could be used to significantly dilute the ownership of a hostile acquirer; |
• | the exclusive right of our board of directors to elect a director to fill a vacancy created by the expansion of our board of directors or by the resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of directors; |
• | limitations on the removal of directors; |
• | a prohibition on stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our stockholders; |
• | the requirement that a special meeting of stockholders be called only by the chairman of our board of directors, |
39
our chief executive officer, our president (in absence of a chief executive officer) or our board of directors, which may delay the ability of our stockholders to force consideration of a proposal or to take action, including the removal of directors;
• | the requirement for the affirmative vote of holders of at least 66 2⁄3% of the voting power of all of the then outstanding shares of our voting stock, voting together as a single class, to amend the provisions of our amended and restated certificate of incorporation relating to the issuance of preferred stock and management of our business or our amended and restated bylaws, which may inhibit the ability of an acquirer from amending our amended and restated certificate of incorporation or amended and restated bylaws to facilitate a hostile acquisition; |
• | the ability of our board of directors, by majority vote, to amend our amended and restated bylaws, which may allow our board of directors to take additional actions to prevent a hostile acquisition and inhibit the ability of an acquirer from amending our amended and restated bylaws to facilitate a hostile acquisition; and |
• | advance notice procedures that stockholders must comply with in order to nominate candidates to our board of directors or to propose matters to be acted upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of us. |
We believe that these provisions protect our stockholders from coercive or harmful takeover tactics by requiring potential acquirers to negotiate with our board of directors and by providing our board of directors with adequate time to assess any acquisition proposal.
We are also subject to certain anti-takeover provisions under the DGCL. Under the DGCL, a corporation may not, in general, engage in a business combination with any holder of 15% or more of its capital stock unless the holder has held the stock for three years or, among other things, our board of directors has approved the transaction.
The provisions in our amended and restated certificate of incorporation and amended and restated bylaws and the anti-takeover provisions under the DGCL, may discourage, delay, prevent or make it more difficult for stockholders or potential acquirers to obtain control of our board of directors or initiate actions that are opposed by our then-current board of directors, including a merger, tender offer, or proxy contest involving our company. Any delay or prevention of a change of control transaction or changes in our board of directors could cause the market price of our common stock to decline. Even in the absence of a takeover attempt, the existence of these provisions may adversely affect the prevailing market price of our common stock if they are viewed as discouraging future takeover attempts.
Our amended and restated certificate of incorporation designates the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain litigation that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.
Our amended and restated certificate of incorporation provides that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for: (i) any derivative action or proceeding brought on our behalf; (ii) any action asserting a claim of breach of fiduciary duty owed by any of our directors, officers or other employees or our stockholders; (iii) any action asserting a claim arising pursuant to any provision of the DGCL or our amended and restated certificate of incorporation or amended and restated bylaws; or (iv) any action asserting a claim governed by the internal affairs doctrine. Our amended and restated certificate of incorporation further provides that any person or entity purchasing or acquiring any interest in shares of our capital stock shall be deemed to have notice of and to have consented to the provisions described above. These provisions may limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.
ITEM 1B. UNRESOLVED STAFF COMMENTS
As of the filing of this report, we had no unresolved comments from the SEC staff regarding our periodic or current reports under the Exchange Act that were received not less than 180 days before the end of our fiscal year to which this report relates.
40
ITEM 2. PROPERTIES
Our principal executive offices are located in Carlsbad, California, from which our orthobiologics and spinal implant products are designed, developed, and marketed, and from which recently launched spinal implant products are inspected, kitted and distributed. We transferred the inspection, kitting, warehousing and distribution functions for our older, legacy spinal implant products to an
outsourced third party in Olive Branch , Mississippi in the fourth quarter of 2016. Our Carlsbad facility is an 82,000-square foot leased facility, where we also maintain our cadaveric training laboratory and our prototyping development and testing operation. The term of this lease expires in 2027. We also lease a 70,000-square foot manufacturing and distribution facility located in Irvine, California, from which most of our orthobiologics products are manufactured and all are distributed. The term of this lease expires in 2023. We also lease a 4,000-square foot office in Wayne, Pennsylvania, where we design spinal implants and which facilitates our interactions with customers on the East Coast. We also lease a 2,600-square foot office in Lyon, France to facilitate our international sales and marketing. We believe that our facilities are sufficient to meet our current needs and that we will be available to renew these leases when needed on acceptable terms.
Our manufacturing facilities are registered with the FDA. Our facilities are subject to FDA inspection to ensure compliance with its Quality System Regulations. For further information regarding the status of FDA inspections, see the "Item 1. Business- Regulation," above.
41
ITEM 3. LEGAL PROCEEDINGS
From time to time, we are subject to legal proceedings and claims in the ordinary course of business. While management presently believes that the ultimate outcome of these proceedings, individually and in the aggregate, will not materially harm our financial position, cash flows, or overall trends in results of operations, legal proceedings are subject to inherent uncertainties, and unfavorable rulings or outcomes could occur that have individually or in aggregate, a material adverse effect on our business, financial condition or operating results. We are not currently subject to any pending material litigation, other than ordinary routine litigation incidental to our business, as described above.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
PART II
ITEM 5. | MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES |
Market Information, Holders and Dividends
Our common stock is listed on the Nasdaq Global Select Market under the symbol “SPNE.” The following table lists the high and low sales prices for our common stock for each full quarterly period within our two most recent fiscal years:
2017 | 2016 | |||||||
High | Low | High | Low | |||||
Fourth Quarter | 11.44 | 9.80 | 10.75 | 6.80 | ||||
Third Quarter | 13.41 | 10.06 | 12.14 | 9.40 | ||||
Second Quarter | 11.52 | 7.54 | 14.93 | 9.49 | ||||
First Quarter | 8.08 | 6.63 | 16.71 | 12.06 | ||||
We have not paid any cash dividends on our common stock since our formation. Our credit facility with Wells Fargo Bank, National Association restricts our ability to declare or pay any cash dividend or make any other cash payment or distribution, directly or indirectly, to the holders of our common stock in their capacity as such. Any future determinations to pay cash dividends on the common stock will be at the discretion of our Board of Directors and will depend upon our results of operations, cash flows, and financial condition, contractual restrictions, restrictions imposed by applicable law and other factors deemed relevant by the Board of Directors.
As of February 26, 2018, we had 346 stockholders of record.
Equity Compensation Plan Information
Information about our equity compensation plan is incorporated herein by reference to Part III, Item 12 of this report.
Recent Sales of Unregistered Securities
During the fourth quarter of 2017, we did not issue any securities that were not registered under the Securities Act of 1933, as amended (the Securities Act).
42
Purchases of Equity Securities by the Issuer
The table below is a summary of our purchases of our common stock for the months with purchase activities during the quarter ended December 31, 2017.
Period | Total Number of Shares Purchased (1) | Average Price Paid per Share | Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs | Maximum Number of Shares That May Yet be Purchased Under the Plans or Programs | |||||||||
December 1 - December 31 | 219 | $ | 10.00 | — | — | ||||||||
(1 | ) | These shares were surrendered to the Company to satisfy tax withholdings obligations in connection with the vesting of restricted stock awards. |
43
ITEM 6. | SELECTED FINANCIAL DATA |
The following table summarizes certain selected financial data derived from our audited financial statements. The information presented should be read in conjunction with “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our audited financial statements and notes thereto appearing elsewhere in this Annual Report on Form 10-K. For periods prior to the spin-off, the consolidated statements of operations data for the years ended December 31, 2014 and 2013 were derived from the audited consolidated financial statements of the orthobiologics and spinal implants business of Integra. Subsequent to the spin-off, the Company’s financial statements are presented on a consolidated basis, as the Company became a separate publicly-traded company on July 1, 2015. As a result, the consolidated financial results and balance sheet data for certain of the periods presented below may not be directly comparable.
Year Ended December 31, | ||||||||||||||||||||
2017 | 2016 | 2015 | 2014 | 2013 | ||||||||||||||||
(In thousands, except per share data) | ||||||||||||||||||||
Consolidated Statements of Operations Data: | ||||||||||||||||||||
Total revenue, net | $ | 131,814 | $ | 128,860 | $ | 133,178 | $ | 138,695 | $ | 146,586 | ||||||||||
Cost of goods sold | 51,826 | 55,544 | 61,119 | 56,714 | 55,532 | |||||||||||||||
Gross profit | 79,988 | 73,316 | 72,059 | 81,981 | 91,054 | |||||||||||||||
Operating expenses: | ||||||||||||||||||||
Selling, general and administrative | 97,303 | 101,065 | 110,551 | 88,213 | 93,009 | |||||||||||||||
Research and development | 12,180 | 11,442 | 8,353 | 8,527 | 9,893 | |||||||||||||||
Intangible amortization | 3,168 | 4,309 | 5,331 | 5,590 | 5,598 | |||||||||||||||
Total operating expenses | 112,651 | 116,816 | 124,235 | 102,330 | 108,500 | |||||||||||||||
Operating loss | (32,663 | ) | (43,500 | ) | (52,176 | ) | (20,349 | ) | (17,446 | ) | ||||||||||
Other (income) expense, net | (430 | ) | 264 | 877 | 269 | 4,556 | ||||||||||||||
Loss before income taxes | (32,233 | ) | (43,764 | ) | (53,053 | ) | (20,618 | ) | (22,002 | ) | ||||||||||
Provision (benefit) for income taxes | (118 | ) | (552 | ) | 2,479 | 3,927 | 3,744 | |||||||||||||
Net loss | $ | (32,115 | ) | $ | (43,212 | ) | $ | (55,532 | ) | $ | (24,545 | ) | $ | (25,746 | ) | |||||
Net loss per share (basic and diluted) | $ | (2.58 | ) | $ | (3.85 | ) | $ | (4.99 | ) | $ | (2.22 | ) | $ | (2.23 | ) | |||||
As of December 31, | ||||||||||||||||||||
2017 | 2016 | 2015 | 2014 | 2013 | ||||||||||||||||
(In thousands) | ||||||||||||||||||||
Consolidated Balance Sheet Data: | ||||||||||||||||||||
Working capital | $ | 53,261 | $ | 58,242 | $ | 87,687 | $ | 28,664 | $ | 37,857 | ||||||||||
Total assets | 134,474 | 147,165 | 176,389 | 139,642 | $ | 153,493 | ||||||||||||||
Long term debt (1) | — | 3,835 | 328 | — | $ | — | ||||||||||||||
Short term debt (2) | — | 445 | — | — | $ | — | ||||||||||||||
Stockholders' equity | 105,653 | 110,977 | 147,339 | 91,284 | $ | 111,495 | ||||||||||||||
(1) In December 2015, the Company entered into a three year credit facility with Wells Fargo Bank, National Association with a maximum borrowing capacity of $30.0 million. See Note 4 to the Consolidated Financial Statements for further information.
(2) In July 2016, the Company entered into two insurance premium finance agreements with First Insurance Funding Corporation and AFCO Acceptance Corporation, as lenders, under which the lenders will pay premiums, taxes and fees to insurance companies on the Company's behalf for various insurance policies under which the Company is the insured for policy terms ranging from 12 to 15 months. See Note 4 to the Consolidated Financial Statements for further information.
44
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The terms “we,” “us,” “our,” “SeaSpine” or the “Company” refer collectively to SeaSpine Holdings Corporation and its wholly-owned subsidiaries, unless otherwise stated. All information presented in this report is based on our fiscal year. Unless otherwise stated, references to particular years, quarters, months or periods refer to our fiscal years ending December 31 and the associated quarters, months and periods of those fiscal years.
This Management’s Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Exchange Act. The matters discussed in these forward-looking statements are subject to risk and uncertainties that could cause actual results to differ materially from those made, projected or implied in the forward-looking statements. Such risks and uncertainties may also give rise to future claims and increase exposure to contingent liabilities. Please see the “Risk Factors” section for a discussion of the uncertainties, risks and assumptions associated with these statements. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.
You can identify these forward-looking statements by forward-looking words such as “believe,” “may,” “could,” “will,” “estimate,” “continue,” “anticipate,” “intend,” “seek,” “plan,” “expect,” “should,” “would” and similar expressions.
These risks and uncertainties arise from (among other factors) the following:
• | general economic and business conditions, in both domestic and international markets; |
• | our expectations and estimates concerning future financial performance, financing plans and the impact of competition; |
• | anticipated trends in our business, including healthcare reform in the United States, increased pricing pressure from our competitors or hospitals, exclusion from major healthcare systems, whether as a result of unwillingness to provide required pricing or otherwise, and changes in third-party payment systems; |
• | physicians’ willingness to adopt our recently launched and planned products, customers’ continued willingness to pay for our products and third-party payors’ willingness to provide or continue coverage and appropriate reimbursement for any of our products and our ability to secure regulatory approval for products in development; |
• | existing and future regulations affecting our business, both in the United States and internationally, and enforcement of those regulations; |
• | anticipated demand for our products and our ability to purchase or produce our products in sufficient quantities to meet customer demand; |
• | our ability to manage timelines and costs related to manufacturing our products; |
• | our ability to attract and retain new, high-quality independent sales agents, whether as a result of inability to reach agreement on financial or other contractual terms or otherwise, disruption to our existing distribution network as new independent sales agents are added, and the ability of new independent sales agents to generate growth or offset disruption to existing independent sales agents; |
• | our ability to successfully develop new and next-generation products and the costs associated with designing and developing those new and next-generation products; |
• | our ability to support the safety and efficacy of our products with long-term clinical data; |
• | our ability to obtain additional debt and equity financing to fund capital expenditures and working capital requirements and acquisitions; |
• | the risk of supply shortages, including our dependence on a limited number of third-party suppliers for components and raw materials; |
45
• | our ability to protect our intellectual property, including unpatented trade secrets, and to operate without infringing or misappropriating the proprietary rights of others; |
• | our ability to complete acquisitions, integrate operations post-acquisition and maintain relationships with customers of acquired entities; and |
• | other risk factors described in the section entitled “Risk Factors.” |
These factors should not be construed as exhaustive and should be read in conjunction with the other cautionary statements that are included in this report.
Spin-off from Integra
SeaSpine was incorporated in Delaware on February 12, 2015 in connection with the spin-off of the orthobiologics and
spinal implant business of Integra. The spin-off occurred on July 1, 2015.
For periods prior to the spin-off, our consolidated financial statements were prepared on a stand-alone basis and were derived from Integra’s consolidated financial statements and accounting records. Therefore, these financial statements reflected, in conformity with accounting principles generally accepted in the United States, the financial position, results of operations, comprehensive loss and cash flows as the orthobiologics and spinal implant business was historically operated as part of Integra.
The consolidated financial statements included the attribution of certain assets and liabilities that were historically held at the Integra corporate level but which were specifically identified or attributable to us. However, cash held by Integra was not attributed to us. Integra’s debt and related interest expense also were not allocated to us for any of the periods presented since we were not the legal obligor of the debt and Integra’s borrowings were not directly attributable to us. Integra managed cash centrally and substantially all cash generated by our business through May 4, 2015, the date we implemented a separate enterprise resource planning (ERP) system, for SeaSpine, was assumed to be remitted to Integra. All significant related party transactions between us and Integra were included in the consolidated financial statements and, prior to the spin-off, were considered to be effectively settled for cash at the time the transaction was recorded, with the exception of the purchases from Integra of Mozaik raw materials and finished goods for all periods presented. Prior to the spin-off, SeaSpine purchased a portion of raw materials and finished goods from Integra for the Mozaik family of products, and SeaSpine contract manufactured certain finished goods for Integra. The total net effect of the settlement of the transactions considered to be effectively settled for cash was reflected in the consolidated statements of cash flows as a financing activity.
Our consolidated statements of operations included our direct expenses for cost of goods sold, research and development, sales and marketing, distribution, and administration as well as allocations of expenses arising from shared services and infrastructure provided by Integra to us, such as costs of information technology, including the costs of a multi-year global ERP implementation, accounting and legal services, real estate and facilities, corporate advertising, insurance services and related treasury, and other corporate and infrastructure services. In addition, other costs allocated to us include restructuring costs, share-based compensation expense and retirement plan expenses related to Integra’s corporate and shared services employees. These operating expenses were allocated to us using estimates that we considered to be a reasonable reflection of the utilization of services provided to or benefits received by us. The allocation methods include pro-rata basis of revenue, standard cost of sales or other measures.
Integra provided some of the services related to these functions to us after the spin-off on a transitional basis for a fee under a transition services agreement. In addition, costs associated with supply agreements with Integra for our Mozaik product line are at materially different terms than those that were incurred while the business was part of Integra. Also, we are incurring costs as an independent, publicly-traded company that are different from the costs historically allocated to us by Integra.
Subsequent to the spin-off, our financial statements are presented on a consolidated basis, as we became a separate publicly-traded company on July 1, 2015.
We incurred $0.3 million and $20.1 million of non-recurring transaction and spin-off related costs and transition service fees from Integra in the years ended December 31, 2016 and 2015, respectively. These costs include, among other things, branding,
46
legal, accounting and other advisory fees and other costs to separate and transition from Integra. No such costs were incurred during the year ended December 31, 2017.
Overview
We are a global medical technology company focused on the design, development and commercialization of surgical solutions for the treatment of patients suffering from spinal disorders. We have a comprehensive portfolio of orthobiologics and spinal implant solutions to meet the varying combinations of products that neurosurgeons and orthopedic spine surgeons need to perform fusion procedures in the lumbar, thoracic and cervical spine. We believe this broad combined portfolio of orthobiologics and spinal implant products is essential to meet the “complete solution” requirements of such surgeons.
We report revenue in two product categories: orthobiologics and spinal implants. Our orthobiologics products consist of a broad range of advanced and traditional bone graft substitutes that are designed to improve bone fusion rates following a wide range of orthopedic surgeries, including spine, hip, and extremities procedures. Our spinal implant portfolio consists of an extensive line of products to facilitate spinal fusion in MIS, complex spine, deformity and degenerative procedures.
Our U.S. sales organization consists of regional and territory managers who oversee a broad network of independent orthobiologics and spinal implant sales agents. We pay these sales agents commissions based on the sales of our products. Our international sales organization consists of a sales management team that oversees a network of independent orthobiologics and spinal implant stocking distributors that purchase products directly from us and independently sell them. For the years ended December 31, 2017 and 2016, international sales accounted for approximately 10% and 9% of our revenue, respectively. Our policy is not to sell our products through or to participate in physician-owned distributorships.
For the year ended December 31, 2017, our total revenue, net was $131.8 million and our net loss was $32.1 million. For the same period, revenue from sales of orthobiologics and spinal implants totaled $69.1 million and $62.7 million, respectively. We will continue to invest in the expansion of our business, primarily in sales, marketing and research and development, and we expect to continue to incur losses. As of December 31, 2017, our cash and cash equivalents totaled $10.8 million.
As of February 26, 2018, we had 327 employees.
Components of Our Results of Operations
Revenue
Our net revenue is derived primarily from the sale of orthobiologics and spinal implant products across North America, Europe, Asia Pacific and Latin America. Sales are reported net of returns, rebates, group purchasing organization fees and other customer allowances.
In the United States, we generate most of our revenue by consigning our orthobiologics products and by consigning or loaning our spinal implant sets to hospitals and independent sales agents, who in turn either deliver them to hospitals for a single surgical procedure, after which they are returned to us, or leave them with hospitals that are high volume users for multiple procedures. The spinal implant sets typically contain the instruments, disposables, and spinal implants required to complete a surgery. We ship replacement inventory to independent sales agents to replace the consigned inventory used in surgeries. We maintain and replenish loaned sets at our kitting and distribution centers and return replenished sets to a hospital or independent sales agent for the next procedure. We recognize revenue on these consigned or loaned products when they have been used or implanted in a surgical procedure.
For all other sales transactions, including sales to international stocking distributors and private label partners, we recognize revenue when the products are shipped to the customer or stocking distributor and the transfer of title and risk of loss occurs. There is generally no customer acceptance or other condition that prevents us from recognizing revenue in accordance with the delivery terms for these sales transactions.
Cost of Goods Sold
Cost of goods sold primarily consists of the costs of finished goods purchased directly from third parties and raw materials used in the manufacture of our products, plant and equipment overhead, labor costs, packaging costs, amortization of product technology intangible assets and freight. The majority of our orthobiologics products are designed and manufactured internally.
47
The cost of human tissue and fixed manufacturing overhead costs are significant drivers of the costs of goods sold and consequently our orthobiologics products, at current production volumes, generate lower gross margin than our spinal implant products. We rely on third-party suppliers to manufacture our spinal implant products, and we assemble them into surgical sets at our kitting and distribution centers. The cost to inspect incoming finished goods and assemble them into new surgical sets is included in cost of goods sold. Other costs included in cost of goods sold include amortization of product technology intangible assets, royalties, shipping, and charges for expired, excess and obsolete inventory. We expect our cost of goods sold to continue to increase in absolute dollars as our sales volume increases over time.
Selling, General and Administrative Expense
Our selling, general and administrative (SG&A) expenses consist primarily of sales commissions to independent sales agents, cost of medical education and training, payroll and other headcount related expenses, depreciation of instrument sets, instrument replacement expense, stock-based compensation, marketing expenses, supply chain and distribution expenses, expenses for information technology, legal, human resources, insurance, finance, facilities, and management. We also record gains or losses associated with changes in the fair value of contingent consideration liabilities in SG&A expenses.
Research and Development Expense
Our research and development (R&D) expenses primarily consist of expenses related to the headcount for engineering, product development, clinical affairs and regulatory functions as well as consulting services, third-party prototyping services, outside research and clinical studies activities, and materials, production and other costs associated with development of our products. We expense R&D costs as they are incurred.
While our R&D expenses fluctuate from period to period based on the timing of specific initiatives, we expect that these costs will increase over time as we continue to design and commercialize new products and expand our product portfolio, add related personnel and conduct additional clinical activities.
Intangible Amortization
Our intangible amortization, including the amounts reported in cost of goods sold, consists of acquisition-related amortization. We expect total annual amortization expense (including amounts reported in cost of goods sold) to be approximately $6.5 million in 2018, $5.8 million in 2019, $4.9 million in 2020, $4.9 million in 2021, and $4.8 million in 2022.
RESULTS OF OPERATIONS
Year Ended December 31, | 2017 vs. 2016 | 2016 vs. 2015 | ||||||||||||||||
(In thousands, except percentages) | 2017 | 2016 | 2015 | % Change | % Change | |||||||||||||
Total revenue, net | $ | 131,814 | $ | 128,860 | $ | 133,178 | 2 | % | (3 | )% | ||||||||
Cost of goods sold | 51,826 | 55,544 | 61,119 | (7 | )% | (9 | )% | |||||||||||
Gross profit | 79,988 | 73,316 | 72,059 | 9 | % | 2 | % | |||||||||||
Gross margin | 61 | % | 57 | % | 54 | % | 7 | % | 6 | % | ||||||||
Operating expenses: | ||||||||||||||||||
Selling, general and administrative | 97,303 | 101,065 | 110,551 | (4 | )% | (9 | )% | |||||||||||
Research and development | 12,180 | 11,442 | 8,353 | 6 | % | 37 | % | |||||||||||
Intangible amortization | 3,168 | 4,309 | 5,331 | (26 | )% | (19 | )% | |||||||||||
Total operating expenses | 112,651 | 116,816 | 124,235 | (4 | )% | (6 | )% | |||||||||||
Operating loss | (32,663 | ) | (43,500 | ) | (52,176 | ) | (25 | )% | (17 | )% | ||||||||
Other (income) expense, net | (430 | ) | 264 | 877 | (263 | )% | (70 | )% | ||||||||||
Loss before income taxes | (32,233 | ) | (43,764 | ) | (53,053 | ) | (26 | )% | (18 | )% | ||||||||
Provision (benefit) for income taxes | (118 | ) | (552 | ) | 2,479 | (79 | )% | (122 | )% | |||||||||
Net loss | $ | (32,115 | ) | $ | (43,212 | ) | $ | (55,532 | ) | (26 | )% | (22 | )% | |||||
48
Year Ended December 31, 2017 Compared to Year Ended December 31, 2016
Revenue
Total revenue, net increased in 2017 by $3.0 million, or 2.3%, to $131.8 million compared to $128.9 million for the prior year.
Year Ended December 31, | |||||||||||
2017 | 2016 | 2017 vs. 2016 | |||||||||
(In thousands) | % Change | ||||||||||
Orthobiologics | $ | 69,128 | $ | 66,240 | 4.4 | % | |||||
United States | 62,533 | 59,458 | 5.2 | % | |||||||
International | 6,595 | 6,782 | (2.8 | )% | |||||||
% of total revenue, net | 52 | % | 51 | % | |||||||
Spinal Implants | $ | 62,686 | $ | 62,620 | 0.1 | % | |||||
United States | 55,872 | 57,342 | (2.6 | )% | |||||||
International | 6,814 | 5,278 | 29.1 | % | |||||||
% of total revenue, net | 48 | % | 49 | % | |||||||
Total revenue, net | $ | 131,814 | $ | 128,860 | 2.3 | % | |||||
Year Ended December 31, | 2017 vs. 2016 | ||||||||||
2017 | 2016 | % Change | |||||||||
(In thousands) | |||||||||||
United States | 118,405 | 116,800 | 1.4 | % | |||||||
% of total revenue, net | 90 | % | 91 | % | |||||||
International | 13,409 | 12,060 | 11.2 | % | |||||||
% of total revenue, net | 10 | % | 9 | % | |||||||
Total revenue, net | $ | 131,814 | $ | 128,860 | 2.3 | % | |||||
Revenue from orthobiologics sales in the United States increased $3.1 million in 2017 to $62.5 million compared to 2016 and was driven by growth in sales across multiple product lines generated by recently added independent sales agents.
Revenue from spinal implant sales in the United States decreased $1.5 million to $55.9 million in 2017 compared to 2016, primarily due to lower prices and decreased usage of our legacy systems, which outpaced the revenue growth contributed by recently launched products and added independent sales agents. Revenue from international sales of spinal implants increased $1.5 million to $6.8 million in 2017 compared to 2016, primarily due to sales by recently added stocking distributors in Latin America and Europe and to increased sales to an existing distributor in Europe.
Cost of Goods Sold and Gross Margin
Cost of goods sold in 2017 decreased $3.7 million from 2016 to $51.8 million. Gross margin was 61% in 2017 and 57% for the prior year. The increase in gross margin was mainly driven by lower manufacturing costs for orthobiologics products manufactured at our Irvine, California facility, and by a $1.7 million provision for excess orthobiologics raw material inventory recorded in the first quarter of 2016. This provision related to management's decision to repurpose a portion of our matched-donor bone raw material for other production uses, which rendered a large portion of the remaining and now unmatched-donor bone as excess quantities that were unlikely to be consumed in future production. These improvements were partially offset by a $0.7 million increase in non-cash amortization of technology intangible assets acquired in September 2016 from NLT and by lower gross margins associated with international sales, which were slightly higher as a percentage of total revenue compared to the prior year.
Cost of goods sold included $3.6 million and $2.9 million of amortization for technology-based intangible assets for 2017 and 2016, respectively, and $0.8 million and $1.2 million of depreciation expense for 2017 and 2016, respectively.
49
Selling, General and Administrative
SG&A expenses decreased $3.8 million to $97.3 million in 2017. The decrease was mainly driven by a $3.6 million decrease in consulting and other expenses related to the completion in late 2016 of various significant information system related projects and of the project to outsource a large portion of our spinal implant kitting and distribution to a third party logistics provider, a $1.5 million non-cash gain recorded in 2017 related to the release of a foreign capital tax liability after the statute of limitations expired, a $0.9 million non-cash gain recorded in 2017 due to a decrease in the fair value of contingent consideration liabilities related to the NLT acquisition, $1.0 million less in legal fees, and the impact of a $0.9 million spinal instrument impairment charge recorded in 2016. These decreases were partially offset by a $4.2 million increase in selling commissions.
Research and Development
R&D expenses increased $0.7 million to $12.2 million in 2017, or 9% of revenue in 2017. The increase was primarily driven by higher external costs related to product development related to our orthobiologics products, and by fees incurred under the transition services agreement with NLT related to continued development of the acquired expandable interbody device technology.
Intangible Amortization
Intangible amortization expense, excluding the amounts reported in cost of goods sold for product technology intangible assets, decreased $1.1 million to $3.2 million in 2017 compared to 2016. The decrease is primarily due to a customer relationships intangible that was fully amortized by July 2016.
Income Taxes
Year Ended December 31, | |||||||
2017 | 2016 | ||||||
(In thousands) | |||||||
Loss before income taxes | $ | (32,233 | ) | $ | (43,764 | ) | |
Benefit for income taxes | (118 | ) | (552 | ) | |||
Effective tax rate | 0.4 | % | 1.3 | % | |||
The primary driver of the effective tax rate in 2017 was a benefit related to the release of uncertain tax positions due to the lapse of the statute of limitations. In 2016 we reported an income tax benefit based on the finalization of an income tax return for our U.S. subsidiary which was not part of our consolidated tax group for the tax period January 1, 2015 through August 31, 2015, offset by foreign income taxes.
In addition, for any pretax losses incurred subsequent to the spin-off by the consolidated U.S. tax group or otherwise, we recorded no corresponding tax benefit because we have concluded that it is more-likely-than-not that we will be unable to realize the benefit from any resulting deferred tax assets. We will continue to assess our position in future periods to determine if it is appropriate to reduce a portion of our valuation allowance in the future.
On December 22, 2017, the Tax Cuts and Jobs Act (2017 Tax Act) was signed into law and has resulted in significant change to the U.S corporate income tax system. The 2017 Tax Act includes a federal statutory rate reduction from 35% to 21%. Since our U.S. net deferred tax assets are currently offset by a full valuations allowance, the change in tax rate has not impacted our effective tax rate for the period ending December 31, 2017. The Company is not subject to the new transition tax on accumulated foreign earnings enacted by the 2017 Tax Act since the foreign operations have been included in US tax filings pursuant to an election to disregard these entities for federal income tax purposes.
Year Ended December 31, 2016 Compared to Year Ended December 31, 2015
Revenue
Total revenue, net decreased in 2015 by $4.3 million, or 3%, to $128.9 million compared to $133.2 million for the prior year.
50
Year Ended December 31, | |||||||||||
2016 | 2015 | 2016 vs. 2015 | |||||||||
(In thousands) | % Change | ||||||||||
Orthobiologics | $ | 66,240 | $ | 67,258 | (1.5 | )% | |||||
United States | 59,458 | 59,873 | (0.7 | )% | |||||||
International | 6,782 | 7,385 | (8.2 | )% | |||||||
% of total revenue, net | 51 | % | 51 | % | |||||||
Spinal Implants | $ | 62,620 | $ | 65,920 | (5.0 | )% | |||||
United States | 57,342 | 60,386 | (5.0 | )% | |||||||
International | 5,278 | 5,534 | (4.6 | )% | |||||||
% of total revenue, net | 49 | % | 49 | % | |||||||
Total revenue, net | $ | 128,860 | $ | 133,178 | (3.2 | )% | |||||
Year Ended December 31, | 2016 vs. 2015 | ||||||||||
2016 | 2015 | % Change | |||||||||
(In thousands) | |||||||||||
United States | 116,800 | 120,259 | (2.9 | )% | |||||||
% of total revenue, net | 91 | % | 90 | % | |||||||
International | 12,060 | 12,919 | (6.6 | )% | |||||||
% of total revenue, net | 9 | % | 10 | % | |||||||
Total revenue, net | $ | 128,860 | $ | 133,178 | (3.2 | )% | |||||
The decline in orthobiologics revenue was primarily driven by lower demand for our products, particularly our synthetic bone matrix products, lower average selling prices and a shift to lower cost first and second generation DBM products due to increasing pricing pressures in the U.S. market.
Revenue from spinal implants sales in the United States decreased $3.0 million to $57.3 million in 2016 compared to 2015 due to continued mid-single digit pricing pressures and lower demand for our older product lines, particularly in our thoracolumbar systems.
Cost of Goods Sold and Gross Margin
Cost of goods sold in 2016 decreased $5.6 million from 2015 to $55.5 million. Gross margin was 57% in 2016 and 54% for the prior year. The increase in gross margin was mainly driven by lower manufacturing costs in 2016 related to our Mozaik product, which we began manufacturing internally at a cost that was lower than the amount we previously paid for the product under our supply agreement with Integra and that was substantially lower than the valuation of Mozaik finished goods inventory as determined by pre-spinoff, carve-out accounting and sold in 2015, the absence of a $2.6 million charge taken in the third quarter of 2015 for excess and obsolete Spinal Implants inventory intended for distribution in international markets, the absence of $0.5 million of allocation expenses from Integra in 2015, and a decrease of $0.5 million in fees incurred for services under a transition services agreement with Integra. These decreases were partially offset by a $1.7 million provision for excess orthobiologics raw material inventory recorded in the first quarter of 2016 related to management's decision to repurpose a portion of our matched-donor bone raw material for other production uses and that rendered a large portion of the remaining and now unmatched-donor bone as excess quantities that were unlikely to be consumed in future production, and a $0.8 million provision for excess and obsolete inventory recorded in the fourth quarter of 2016 related to our launch of a sterile packaged version of our NanoMetalene interbody devices product line. With the launch of the sterile packaged product, we are no longer actively selling the non-sterile packaged NanoMetalene inventory.
Cost of goods sold included $2.9 million and $2.7 million of amortization for product technology intangible assets in 2016 and 2015, respectively, and $1.2 million and $0.3 million of depreciation expense for 2016 and 2015, respectively.
51
Selling, General and Administrative
SG&A expenses decreased $9.5 million to $101.1 million in 2016. The decrease was mainly driven by a $1.6 million decrease in fees incurred for services under a transition services agreement with Integra, the absence of $17.2 million of nonrecurring spin-off related charges and the absence of $1.9 million of medical device tax, which was suspended at the end of 2015. In 2015, SG&A expense included $8.6 million in allocated expenses from Integra. Since the spin-off, we have directly incurred those expenses that were previously allocated from Integra, including the compensation and related costs of our executive management team and expenses associated with being an independent, publicly-traded company, such as audit, insurance, and information technology-related fees. We have also incurred greater expense from the hiring of additional marketing, sales and administrative headcount since the spin-off, and incurred $1.4 million of expenses in 2016 related to the shutdown of our former Vista facility, and $0.5 million of acquisition-related charges.
Research and Development
R&D expenses increased $3.1 million to $11.4 million in 2016, which was 9% of revenue in 2016. The increase was primarily driven by a $2.2 million increase in compensation costs due to an increase in headcount, and a $1.0 million increase in external costs related to product development and clinical studies, offset by the absence of $0.3 million of allocated expenses from Integra in 2015.
Intangible Amortization
Intangible amortization expense, excluding the amounts reported in cost of goods sold for product technology intangible assets , decreased $1.0 million to $4.3 million in 2016, primarily due to non-compete agreements that were fully amortized by the second quarter of 2015, and a customer relationships intangible that was fully amortized by the third quarter of 2016.
Income Taxes
Year Ended December 31, | |||||||
2016 | 2015 | ||||||
(In thousands) | |||||||
Loss before income taxes | $ | (43,764 | ) | $ | (53,053 | ) | |
Provision (benefit) for income taxes | (552 | ) | 2,479 | ||||
Effective tax rate | 1.3 | % | (4.7 | )% | |||
The primary drivers of the effective tax rate in 2016 and 2015 were pretax losses incurred by the consolidated U.S. tax group that received no corresponding tax benefit and pretax income incurred by a U.S. subsidiary not included in our U.S. consolidated federal income tax return prior to September 1, 2015.
We reported income tax benefit in 2016 primarily based on the finalization of an income tax return for our U.S. subsidiary which was not part of the U.S. consolidated tax group for the tax period January 1, 2015 through August 31, 2015 offset by foreign income taxes. We reported income tax expense in 2015 related to the taxable income generated by a U.S. subsidiary that was not part of the U.S. consolidated tax group through August 31, 2015. As such, despite the losses before income taxes reported in those periods, the taxable income generated by such U.S. subsidiary was not allowed to be offset against the taxable losses generated by our other U.S. subsidiaries through August 31, 2015. Effective September 1, 2015, we made an election that allows us to offset any future taxable losses generated by our U.S. subsidiaries against any future taxable income generated by our U.S. subsidiaries.
The income tax provision in the consolidated statements of operations for periods prior to the spin-off was calculated using the separate return method, as if we had filed a separate tax return and operated as a stand-alone business. However, because Integra historically generated taxable income in excess of our pretax losses incurred prior to the spinoff and all of our U.S. subsidiaries that incurred these pretax losses were included in Integra’s U.S. consolidated tax group, those pretax losses were more than offset by Integra’s taxable income. Therefore, there were no U.S. net operating losses available to us for future use at the date of the spin-off.
In addition, for any pretax losses incurred subsequent to the spin-off by the consolidated U.S. tax group or otherwise, we recorded no corresponding tax benefit because we have concluded that it is more-likely-than-not that we will be unable to realize the benefit from any resulting deferred tax assets. We will continue to assess our position in future periods to determine if it is appropriate to reduce a portion of our valuation allowance in the future.
52
Business Factors Affecting the Results of Operations
Special Charges and Gains
We define special charges and gains as expenses and gains for which the amount or timing can vary significantly from period to period, and for which the amounts are non-cash in nature, or the amounts are not expected to recur at the same magnitude.
We believe that identification of these special charges and gains provides important supplemental information to investors regarding financial and business trends relating to our financial condition and results of operations. Investors may find this information useful in assessing comparability of our operating performance from period to period, against the business model objectives that management has established, and against other companies in our industry. We provide this information to investors so that they can analyze our operating results in the same way that management does and use this information in their assessment of the core business and valuation of SeaSpine.
Loss before income taxes includes the following special charges and gains for the years ended December 31, 2017, 2016 and 2015:
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
Special Charges: | (In thousands) | ||||||||||
SeaSpine spin-off related charges | $ | — | $ | — | $ | 17,278 | |||||
Transition services agreement charges | — | 265 | 2,809 | ||||||||
Discontinued and excess/obsolete product line charges | — | — | 2,600 | ||||||||
Excess raw material charge | — | 1,700 | — | ||||||||
Acquisition-related charges | — | 457 | — | ||||||||
Total Special Charges | $ | — | $ | 2,422 | $ | 22,687 | |||||
Special Gains: | |||||||||||
Non-cash gain from release of a foreign non-income tax liability | $ | (1,512 | ) | $ | — | $ | — | ||||
Non-cash gain from change in fair value of contingent consideration liabilities | (975 | ) | (270 | ) | — | ||||||
Total Special Gains | $ | (2,487 | ) | $ | (270 | ) | $ | — | |||
The items reported above are reflected in the consolidated statements of operations as follows:
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
(In thousands) | |||||||||||
Cost of goods sold | $ | — | $ | 1,704 | $ | 3,248 | |||||
Research and development | — | 8 | 348 | ||||||||
Selling, general and administrative | — | 710 | 19,091 | ||||||||
Total Special Charges | $ | — | $ | 2,422 | $ | 22,687 | |||||
Selling, general and administrative | $ | (2,375 | ) | $ | — | $ | — | ||||
Other income | (112 | ) | (270 | ) | — | ||||||
Total Special Gains | $ | (2,487 | ) | $ | (270 | ) | $ | — | |||
These special charges and gains are directly related to the SeaSpine business, do not include allocations from Integra, and consist of the following items:
• | SeaSpine spin-off related charges include legal, accounting, program management and outside consulting expenses incurred as part of the spin-off from Integra, and incremental personnel costs associated with becoming an independent, publicly-traded company that were duplicative to the allocations from Integra. |
53
• | Transition services agreement charges include charges from Integra immediately after the spin-off for the performance of certain transition services to SeaSpine until we hired the internal support and completed the build out of our infrastructure such that we could function separately as an independent, publicly traded company. |
• | A shift in management’s international sales strategy in 2015 that rendered a large portion of our spinal implant inventory intended for distribution in international markets as excess and obsolete. |
• | The excess raw material charge in 2016 relates to management’s decision to repurpose a portion of our matched-donor bone raw material for other production uses and that rendered a large portion of the remaining and now unmatched-donor bone as excess quantities that were unlikely to be consumed in future production. |
• | Acquisition-related charges include transaction fees and the amortization of inventory fair value adjustments related to acquisitions. |
• | Gain from release of a foreign non-income tax liability is due to the passage of the statute of limitations. |
• | Gain from change in fair value of contingent consideration relates to the decrease in the fair value of contingent milestone and royalty payments associated with the NLT acquisition in 2016. |
Liquidity and Capital Resources
Overview
As of December 31, 2017, we had cash and cash equivalents totaling approximately $10.8 million, and $20.5 million of current borrowing capacity was available under our credit facility. We believe that our cash and cash equivalents on hand and the amount currently available to us under our credit facility will be sufficient to fund our operations for at least the next twelve months.
Credit Facility
We have a $30.0 million credit facility with Wells Fargo Bank, National Association which expires in December 2018, subject to a one-time, one-year extension at our election. At December 31, 2017, we had no outstanding borrowings under the credit facility. The borrowing capacity under the credit facility is determined monthly and is based on the amount of our eligible accounts receivable and inventory balances and qualified cash (as defined in the credit facility). Depending on the extent to which our eligible accounts receivable and inventory balances increase, our borrowing capacity could increase by as much as an additional $6.0 million from the $20.5 million available as of December 31, 2017 before we are required to maintain the minimum fixed charge coverage ratio as discussed below. The credit facility contains various customary affirmative and negative covenants, including prohibiting us from incurring indebtedness without the lender’s consent. Under the terms of the credit facility, if our Total Liquidity (as defined in the credit facility) is less than $5.0 million, we are required to maintain a minimum fixed charge coverage ratio of 1.10 to 1.00 for the applicable measurement period. Our Total Liquidity was $29.2 million at December 31, 2017, and therefore that financial covenant was not applicable at that time.
Business Combinations
In August 2016, we entered into an asset purchase agreement with NLT to acquire certain of the assets of NLT’s medical device business related to the expandable interbody medical devices. We made an up-front cash payment of $1.0 million in connection with the initial closing in September 2016 and issued 350,000 shares of our common stock in January 2017 as contingent closing consideration. At December 31, 2017, we recorded a $2.6 million liability representing the estimated fair value of future contingent milestone payments related to the achievement of certain commercial milestones, which we anticipate will become payable at varying times between 2018 and 2023, and a $1.8 million liability representing the estimated fair value of future contingent royalty payments based on percentages of our future net sales of certain of the products and technology we acquired, which we anticipate will become payable at varying times between 2017 and 2028. The contingent milestone payments, if any, are payable in cash or in shares of our common stock, at our election. The contingent royalty payments are payable in cash.
54
At The Market Program
In August 2016, we entered into an equity distribution agreement with Piper Jaffray & Co. (Piper Jaffray), pursuant to which we may offer and sell shares of our common stock in “at the market” (ATM) offerings (as defined in Rule 415 of the Securities Act) having an aggregate offering price up to $25.0 million in gross proceeds from time to time through Piper Jaffray acting as sales agent. During the year ended December 31, 2017, we received net proceeds of approximately $15.6 million, net of $0.6 million of offering costs, from the sale of 1,500,000 shares of our common stock.
In February 2018, we received net proceeds of approximately $8.6 million, net of $0.2 million of offering costs, from the sale of approximately 882,000 shares of our common stock and which consumed the remaining capacity under the ATM equity distribution agreement.
Cash and Cash Equivalents
We had cash and cash equivalents totaling approximately $10.8 million and $14.6 million at December 31, 2017 and December 31, 2016, respectively.
Cash Flows
Year Ended December 31, | 2017 vs. 2016 | 2016 vs. 2015 | |||||||||||||||
2017 | 2016 | 2015 | % Change | % Change | |||||||||||||
(In thousands) | |||||||||||||||||
Net cash used in operating activities | $ | (8,622 | ) | $ | (14,270 | ) | $ | (32,566 | ) | (40 | )% | (56 | )% | ||||
Net cash used in investing activities | (7,646 | ) | (8,719 | ) | (11,705 | ) | (12 | )% | (26 | )% | |||||||
Net cash provided by financing activities | 12,040 | 4,276 | 77,130 | 182 | % | (94 | )% | ||||||||||
Effect of exchange rate fluctuations on cash | 450 | (150 | ) | (82 | ) | (400 | )% | 83 | % | ||||||||
Net increase (decrease) in cash and cash equivalents | $ | (3,778 | ) | $ | (18,863 | ) | $ | 32,777 | (80 | )% | (158 | )% | |||||
Net Cash Flows Used in Operating Activities
We used $8.6 million and $14.3 million in operating activities during 2017 and 2016, respectively.
Operating cash outflows during 2017 decreased by $5.6 million compared to 2016, primarily due to higher revenue, and lower cash-based operating expenses incurred, partially offset by lower trade payable balances in 2017 as compared to 2016.
Operating cash outflows during 2016 increased by $18.3 million compared to 2015. Net loss plus adjustments to reconcile net loss to net cash used in operating activities increased cash inflows by $12.4 million, largely driven by the absence of spin-off related charges. Among the changes in working capital, our more efficient management of inventory in 2016 increased operating cash flows by $9.8 million compared to 2015 for inventory purchases and the efficiency with which we collected accounts receivable in 2016 increased operating cash inflows by $6.3 million in 2016 compared to 2015. The timing of payments to suppliers and settlement of accrued expenses in 2016 decreased operating cash flows by $14.0 million in 2016 compared to 2015.
Net Cash Flows Used in Investing Activities
Net cash used in investing activities was $7.6 million in 2017 compared to $8.7 million in 2016. The $1.1 million decrease was primarily attributable to larger investments in leasehold improvements in our Carlsbad facility in the first half of 2016 and to the $1.0 million cash payment associated with the NLT acquisition in 2016, offset by $1.8 million more in instrument purchases in 2017 to support new product launches.
Net cash used in investing activities was $8.7 million in 2016 compared to $11.7 million in 2015. The $3.0 million decrease was primarily attributable to the completion of a global ERP system implementation in 2015, a $0.7 million decrease in purchases of spinal implant sets and instruments related to existing products and new product launches in 2016, and decreased purchases in other capital expenditures, offset by the $1.0 million cash paid in connection with the NLT acquisition in 2016.
55
Net Cash Flows Provided by Financing Activities
Net cash provided by financing activities was $12.0 million in 2017 compared to $4.3 million in 2016, and $77.1 million in 2015. Financing cash flows for 2017 were comprised primarily of $15.6 million of net proceeds from the sale of shares of our common stock under the ATM equity offering program and $1.0 million of proceeds from the sale of shares of our common stock under our 2015 Employee Stock Purchase Plan. We used $4.0 million of cash to repay all of the outstanding borrowings under the credit facility and $0.4 million of cash to repay the remaining short-term debt related to our insurance premium finance agreements (see Note 4 "Debt and Interest" to the Notes to Consolidated Financial Statements included in Part I, Item 1 of this report).
We borrowed $3.3 million under the credit facility in 2016 and generated $0.7 million in cash from sales of our common stock under our employee stock purchase program. The higher net cash provided by financing activities in 2015 resulted from an investment from Integra and the $34.0 million cash contribution from Integra in connection with the spin-off in 2015.
Off-Balance Sheet Arrangements
There were no off-balance sheet arrangements as of December 31, 2017 that have or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to our business.
Contractual Obligations and Commitments
As of December 31, 2017, we were obligated to pay the following amounts under various agreements:
Total | Less than 1 Year | 1-3 Years | 4-5 Years | More than 5 Years | |||||||||||||||
(In millions) | |||||||||||||||||||
Employment Agreements | $ | 0.7 | $ | 0.5 | $ | 0.2 | $ | — | $ | — | |||||||||
Operating Leases | 17.1 | 2.1 | 4.3 | 4.5 | 6.2 | ||||||||||||||
Purchase Obligations | 10.5 | 10.5 | — | — | — | ||||||||||||||
Credit Facility | — | — | — | — | — | ||||||||||||||
Other | 2.2 | 1.2 | 1.0 | — | — | ||||||||||||||
Total | $ | 30.5 | $ | 14.3 | $ | 5.5 | $ | 4.5 | $ | 6.2 | |||||||||
The "Other" line item includes minimum royalties and milestone payments under certain license agreements, and guaranteed commissions. Total contractual obligations and commitments listed in the above table excludes the following liabilities:
• | the liability for uncertain tax benefits, including interest and penalties, totaling approximately $0.3 million; |
• | the contingent milestone and royalty payments related to the NLT asset acquisition; |
• | the potential royalty and milestone payments for a license agreement, under which there are certain cumulative milestone payments totaling $2.4 million at various stages of developing the licensed technology and sales of products using the licensed technology. |
These liabilities have been excluded because we cannot make a reliable estimate of the timing of the triggering events and associated payments.
Critical Accounting Polices and the Use of Estimates
Our discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent liabilities, and the reported amounts of revenues and expenses. Significant estimates affecting amounts reported or disclosed in the consolidated financial statements include revenue recognition, allowances for doubtful accounts receivable and sales return and other credits, net realizable value of inventories, amortization periods for acquired intangible assets, estimates of projected cash flows and discount rates used to value intangible assets and test them for impairment, estimates of projected cash flows and assumptions related to the timing and probability of the product
56
launch dates, discount rates matched to the timing of payments, and probability of success rates used to value contingent consideration liabilities from business combinations, estimates of projected cash flows and depreciation and amortization periods for long-lived assets, valuation of stock-based compensation, computation of taxes and valuation allowances recorded against deferred tax assets, and loss contingencies. These estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the current circumstances. Actual results could differ from these estimates.
We believe that the following accounting policies, which form the basis for developing these estimates, are those that are most critical to the presentation of our consolidated financial statements and require the more difficult subjective and complex judgments:
Revenue Recognition
Our net sales are derived primarily from the sale of orthobiologics and spinal implant products globally. Sales are reported net of returns, rebates, group purchasing organization fees and other customer allowances.
Revenue is recognized when persuasive evidence of an arrangement exists, delivery has occurred, title and risk of loss have passed to the customer, there is a fixed or determinable sales price and collectability of that sales price is reasonably assured.
In the United States, we generate most of our revenue by consigning our orthobiologics products and consigning or loaning our spinal implant sets to hospitals and independent sales agents, who in turn deliver them to the hospital for a single surgical procedure or leave them with hospitals that are high volume users for use in multiple procedures. The spinal implant sets typically contain the instruments, including disposables, and spinal implants required to complete a surgery. We ship replacement inventory to independent sales agents to replace the consigned inventory used in surgeries and maintain and replenish the loaned sets and return them to a hospital or independent sales agent for the next procedure. We recognize revenue on these consigned or loaned products when they have been used or implanted in a surgical procedure.
For all other transactions, including sales to international stocking distributors, we recognize revenue when the products are shipped to the customer or stocking distributor and the transfer of title and risk of loss occurs. There are generally no customer acceptance or other conditions that prevent us from recognizing revenue in accordance with the delivery terms.
Product royalties are estimated and recognized in the same period that the royalty-based products are sold by licensees. We estimate and recognize royalty revenue based upon communication with licensees, historical information and expected sales trends. Differences between actual revenues and estimated royalty revenues are adjusted in the period in which they become known, which is typically the following quarter. Historically, such adjustments have not been significant.
Allowance for Doubtful Accounts Receivable
We evaluate the collectability of accounts receivable based on a combination of factors. In circumstances where a specific customer is unable to meet its financial obligations to us, we record an allowance to reduce the net recognized receivable to the amount that we reasonably expect to collect. For all other customers, we record allowances for doubtful accounts based on the length of time the receivables are past due, the current business environment and our historical experience. If the financial condition of customers or the length of time that receivables are past due were to change, we may incur bad debt expense in SG&A.
Inventories
Inventories, consisting of purchased materials, direct labor and manufacturing overhead, are stated at the lower of cost, the value determined by the first-in, first-out method, or the market methods. At each balance sheet date, we evaluate ending inventories for excess quantities, obsolescence or shelf-life expiration. Our evaluation includes an analysis of our current and future strategic plans, historical sales levels by product, projections of future demand by product, the risk of technological or competitive obsolescence for our products, general market conditions, a review of the shelf-life expiration dates for our products, and the feasibility of reworking or using excess or obsolete products or components in the production or assembly of other products that are not obsolete or for which we do not have excess quantities in inventory. To the extent that we determine there are excess or obsolete quantities or quantities with a shelf life that is too near its expiration for us to reasonably expect that we can sell those products prior to their expiration, we adjust their carrying value to estimated net realizable value. If future demand or market conditions are lower than our projections or if we are unable to rework excess or obsolete quantities into other products, we may record further adjustments to the carrying value of inventory through a charge to cost of goods sold in the period the revision is made. In addition, we capitalize inventory costs associated with certain products prior to regulatory
57
approval, based on management’s judgment of probable economic benefit. We could be required to expense previously capitalized costs related to pre-approval inventory upon a change in such judgment, due to, among other potential factors, a denial or delay of approval by necessary regulatory bodies or a decision by management to discontinue the related development program.
Property, Plant and Equipment
Property, plant and equipment is carried at cost less accumulated depreciation. Depreciation is computed using the straight-line method based on an asset’s estimated useful life. Maintenance and repairs on all property and equipment are expensed as incurred. Depreciation of spinal instrument sets and instrument replacement expense is recorded in SG&A.
Valuation of Identifiable Intangible Assets
Our intangible assets are comprised primarily of product technology, customer relationships, and trade name and trademarks. We make significant judgments in relation to the valuation of intangible assets resulting from business combinations and asset acquisitions. Significant estimates include, but are not limited to, measurements estimating cash flows and determining the appropriate discount rate.
Intangible assets are amortized on a straight-line basis over their estimated useful lives of 1 to 20 years. We base the useful lives and related amortization expense on the period of time we estimate the assets will generate revenues or otherwise be used by the Company. We also periodically review the lives assigned to our intangible assets to ensure that our initial estimates do not exceed any revised estimated periods from which we expect to realize cash flows from the technologies. If a change were to occur in any of the above-mentioned factors or estimates, the likelihood of a material change in our reported results would increase.
We review identifiable intangible assets with definite lives for impairment quarterly or whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Factors that we consider in determining whether a triggering event has occurred include a significant change in the business climate, legal factors, operating performance indicators, competition, sale or disposition of significant assets or products. Application of these impairment tests requires significant judgments, including estimation of future cash flows, which is dependent on internal forecasts, estimation of the long-term rate of growth for our business, the useful life over which cash flows will occur and determination of our weighted-average cost of capital.
Should a triggering event be deemed to occur, we are required to estimate the expected net cash flows to be realized over the life of the asset and/or the asset’s fair value. Fair values are determined by a discounted cash flow model. These estimates are also subject to significant management judgment including the determination of many factors such as revenue growth rates, cost growth rates, terminal value assumptions and discount rates. Changes in these estimates can have a significant impact on the determination of cash flows and fair value and could potentially result in future material impairments.
Valuation of Stock-Based Compensation
The estimated fair value of stock-based awards exchanged for employee and non-employee director services are expensed over the requisite service period.
For purposes of calculating stock-based compensation, we estimate the fair value of stock options using a Black-Scholes option-pricing model. The determination of the fair value of stock-based payment awards utilizing the Black-Scholes model is affected by our stock price and a number of assumptions, including expected volatility, expected term, risk-free interest rate and expected dividends. Due to our limited historical data as a separate public company, the expected volatility is calculated based upon the historical volatility of comparable companies in the medical device industry whose share prices are publicly available for a sufficient period of time. The expected term of "plain vanilla" options is calculated using the simplified method as prescribed by accounting guidance for stock-based compensation. A "plain vanilla" option is an option with the following characteristics: (1) the option is granted at-the-money; (2) exercisability is conditional only on satisfaction of a service condition through the vesting date; (3) employees who terminate their service prior to vesting forfeit the options; (4) employees who terminate their service after vesting are granted limited time to exercise their stock options; and (5) the options are nontransferable and nonhedgeable. The expected term of any other option is based on disclosures from similar companies with similar grants. The risk-free interest rates are derived from the U.S. Treasury yield curve in effect on the date of grant for instruments with a remaining term similar to the expected term of the options. We considered that we have never paid cash
58
dividends and do not currently intend to pay cash dividends. The fair value of restricted stock awards granted is based on the market price of our common stock on the date of grant. In addition, we apply an expected forfeiture rate when amortizing stock-based compensation expense. The expected forfeiture rate is based on historical experience of pre-vesting forfeitures on awards by each homogenous group of shareowners and is estimated to be 15%, 12% and 10% annually for all non-executive employees for the years ended December 31, 2017, 2016 and 2015, respectively. There is no forfeiture rate applied for non-employee directors and executive employees as their pre-vesting forfeitures are anticipated to be highly unlikely. As individual grant awards become fully vested, stock-based compensation expense is adjusted to recognize actual forfeitures.
If factors change and we employ different assumptions, stock-based compensation expense may differ significantly from what we have recorded in the past. If there is a difference between the assumptions used in determining stock-based compensation expense and the actual factors which become known over time, specifically with respect to anticipated forfeitures, we may change the input factors used in determining stock-based compensation costs for future grants. These changes, if any, may materially impact our results of operations in the period such changes are made.
Income Taxes
The income tax provision in the consolidated statements of operations for periods prior to the spin-off was calculated using the separate return method, as if we filed a separate tax return and operated as a stand-alone business. Therefore, cash tax payments and items of current and deferred taxes may not be reflective of our actual tax balances included in Integra’s historical consolidated income tax return. More specifically, the presentation of substantial net operating losses, and any related valuation allowances, presented herein prior to the spin-off do not represent actual net operating losses that have been incurred by us or that are available for carryforward to a future tax year.
The primary driver of the effective tax rate in 2017 was a benefit related to the release of uncertain tax positions due to the lapse of the statute of limitations. We reported income tax benefit in 2016 primarily based on the finalization of an income tax return for our U.S. subsidiary which was not part of the U.S consolidated tax group for the tax period January 1, 2015 through August 31, 2015 offset by foreign income taxes.
Changes in the tax rates of the various jurisdictions in which we operate affect our profits. In addition, we maintain a reserve for uncertain tax benefits, changes to which could impact our effective tax rate in the period such changes are made. The effective tax rate can also be impacted by changes in valuation allowances of deferred tax assets, and tax law changes.
Our provision for income taxes may change period-to-period based on specific events, such as the settlement of income tax audits and changes in tax laws, as well as general factors, including the geographic mix of income before taxes, state and local taxes.
We recognize a tax benefit from an uncertain tax position only if it is more likely than not to be sustained upon examination based on the technical merits of the position. The amount of the accrual for which an exposure exists is not material for any period presented.
We believe that we have identified all reasonably identifiable exposures and the reserve we have established for identifiable exposures is appropriate under the circumstances; however, it is possible that additional exposures exist and that exposures will be settled at amounts different than the amounts reserved. It is also possible that changes in facts and circumstances could cause us to either materially increase or reduce the carrying amount of our tax reserves.
Our deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and their basis for income tax purposes, and also the temporary differences created by the tax effects of capital loss, net operating loss and tax credit carryforwards. We record valuation allowances to reduce deferred tax assets to the amounts that are more likely than not to be realized. We could recognize no benefit from our deferred tax assets or we could recognize some or all of the future benefit depending on the amount and timing of taxable income we generate in the future.
The Tax Cuts and Jobs Act enacted on December 22, 2017 reduces the U.S federal corporate tax rate from 35% to 21%. Accordingly, we have modified the value of the deferred tax assets and liabilities including the net operating loss carryover at December 31, 2017. The Company is not subject to the new transition tax on accumulated foreign earnings enacted by the 2017 Tax Act since the foreign operations have been included in US tax filings pursuant to an election to disregard these entities for federal income tax purposes.
59
Loss Contingencies
We are subject to claims and lawsuits in the ordinary course of our business, with respect to our products, our current or former employees, and involving commercial disputes. We accrue for loss contingencies when it is deemed probable that a loss has been incurred and that loss is estimable. The amounts accrued are based on the full amount of the estimated loss before considering insurance proceeds, if applicable, and do not include an estimate for legal fees expected to be incurred in connection with the loss contingency. We accrue legal fees expected to be incurred in connection with loss contingencies as those fees are incurred by outside counsel as a period cost. Our financial statements do not reflect any material amounts related to possible unfavorable outcomes of claims and lawsuits to which we are currently a party because we currently believe that such claims and lawsuits are not expected, individually or in the aggregate, to result in a material and adverse effect on our financial condition.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to various market risks, including changes in foreign currency exchange rates and interest rates that could adversely affect our results of operations and financial condition.
Foreign Currency Exchange Risk
We operate on a global basis and are exposed to the risk that changes in foreign currency exchange rates could adversely affect our financial condition, results of operations and cash flows. In 2017, 2016 and 2015, we generated revenues outside the United States in multiple foreign currencies including euros, British pounds, and Swiss francs, and in U.S. dollar-denominated transactions conducted with customers who generated revenue in currencies other than the U.S. dollar. We also incur operating expenses in euros. As a result, changes in the exchange rates of any such foreign currency versus the U.S. dollar may affect our revenues, gross profits and net loss and may also affect the book value of our assets and the amount of stockholders’ equity. We cannot predict the consolidated effects of exchange rate fluctuations upon our future operating results because of the variability of foreign currency exposure in our revenues and operating expenses and the potential volatility of currency exchange rates.
Interest Rate Risk
Our primary exposure to market risk is interest expense and interest income sensitivity, which is affected by changes in the general level of U.S. interest rates.
Our cash and cash equivalents as of December 31, 2017 consisted of cash and money market accounts. We are exposed to market risk related to fluctuations in interest rates and market prices. We currently do not hedge interest rate exposure. However, because of the short-term nature of the instruments in our portfolio, a sudden change in market interest rates would not be expected to have a material impact on our financial condition and/or results of operation.
We had no outstanding borrowings under our credit facility as of December 31, 2017. Our borrowings under the credit facility accrue interest at the rate then applicable to the base rate loans (as customarily defined), unless and until converted into LIBOR rate loans in accordance with the terms of the credit facility. Borrowings bear interest at a floating annual rate equal to (a) during any month for which our average excess availability (as customarily defined) is greater than $20.0 million, base rate plus (i) 1.25 percentage points for base rate loans and (ii) LIBOR rate plus 2.25 percentage points for LIBOR rate loans, (b) during any month for which our average excess availability is greater than $10.0 million but less than or equal to $20.0 million, (i) base rate plus 1.50 percentage points for base rate loans and (ii) LIBOR rate plus 2.50 percentage points for LIBOR rate loans and (c) during any month for which our average excess availability is less than or equal to $10.0 million, (i) base rate plus 1.75 percentage points for base rate loans and (ii) LIBOR rate plus 2.75 percentage points for LIBOR rate loans. A hypothetical 100 basis point change in interest rates would not be expected to have a material effect on our net loss for the period or cash flow.
ITEM 8. | FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA |
Financial statements and the financial statement schedules specified by this Item, together with the reports thereon of RSM US LLP and PricewaterhouseCoopers LLP, are presented following the signature page to this report.
Information on quarterly results of operations is set forth in our financial statements under Note 14, “Selected Quarterly Information — Unaudited,” to our consolidated financial statements.
60
ITEM 9. | CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES |
Not applicable.
ITEM 9A. CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
Based on an evaluation under the supervision and with the participation of our management, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act were effective as of the end of the period covered by this report to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC rules and forms and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
Management’s Annual Report on Internal Control Over Financial Reporting
The Company's management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act). Internal control over financial reporting is a process designed under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America. Management conducted an assessment of the effectiveness of the Company's internal control over financial reporting based on the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control—Integrated Framework (2013 Framework). Based on this assessment, our management concluded that, as of December 31, 2017, our internal control over financial reporting was effective based on those criteria.
Attestation Report on Internal Control over Financial Reporting
As an emerging growth company, under Section 103 of the JOBS Act, we are not required to provide, and this report does not include, an attestation report of our independent registered public accounting firm regarding our internal control over financial reporting.
Changes in Internal Control over Financial Reporting
There have been no changes in our internal control over financial reporting identified in connection with the evaluation required by Rules 13a-15(d) and 15d-15(d) under the Exchange Act that occurred during the quarter ended December 31, 2017 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Inherent Limitations of Internal Controls
Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal controls over financial reporting will prevent or detect all error and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
61
ITEM 9B. OTHER INFORMATION
None.
62
Part III
Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.
Information required by this item will be set forth under the headings “PROPOSAL 1: ELECTION OF DIRECTORS,” “EXECUTIVE COMPENSATION AND OTHER INFORMATION,” and “SECTION 16(a) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE” in our definitive proxy statement to be filed with the SEC in connection with our 2018 Annual Meeting of Stockholders, or the Definitive Proxy Statement, which is expected to be filed not later than 120 days after the end of our fiscal year ended December 31, 2017, and is incorporated in this report by reference.
Item 11. EXECUTIVE COMPENSATION.
The information required by this item will be set forth under the heading "EXECUTIVE COMPENSATION AND OTHER INFORMATION" in the Definitive Proxy Statement and is incorporated in this report by reference.
Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.
The information required by this item will be set forth under the headings “SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT” and “EXECUTIVE COMPENSATION AND OTHER INFORMATION” in the Definitive Proxy Statement and is incorporated in this report by reference.
Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.
The information required by this item will be set forth under the headings “CERTAIN RELATIONSHIPS AND RELATED PARTY TRANSACTIONS” and “PROPOSAL 1: ELECTION OF DIRECTORS” in the Definitive Proxy Statement and is incorporated in this report by reference.
Item 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.
The information required by this item will be set forth under the headings “PROPOSAL 2: RATIFICATION OF SELECTION OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM” in the Definitive Proxy Statement and is incorporated in this report by reference.
63
PART IV
ITEM 15. | EXHIBITS AND FINANCIAL STATEMENT SCHEDULES |
(a) Documents filed as a part of this report.
1. Financial Statements.
The following financial statements and financial statement schedules are filed as a part of this report:
2. Financial Statement Schedules. | |
All other schedules not listed above have been omitted, because they are not applicable or are not required, or because the required information is included in the consolidated financial statements or notes thereto.
3. Exhibits required to be filed by Item 601 of Regulation S-K.
64
EXHIBIT INDEX | ||||||||||
Incorporated by Reference | ||||||||||
Exhibit No. | Description | Filed or Furnished Herewith | Form | File/Film No. | Date Filed | |||||
2.1(a)*# | Form 10-Q | 001-36905-161987764 | 11/10/2016 | |||||||
2.1(b) | Form 10-Q | 001-36905-161987764 | 11/10/2016 | |||||||
2.1(c) | Form 10-K | 001-36905-17665133 | 3/3/2017 | |||||||
2.2# | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
3.1 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
3.2 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
4.1 | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
4.2 | Form S-3 | 333-213089-161825462 | 8/11/2016 | |||||||
10.1 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
10.2 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
10.3 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
10.4 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
65
10.5 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
10.6 | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
10.7** | Form 8-K | 001-36905-15966132 | 7/1/2015 | |||||||
10.8** | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.9** | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.10** | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.11** | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.12** | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.13(a) | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.13(b) | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.14 | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.15(a) | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
66
10.15(b) | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.16 | Form 8-K | 001-36905-151103433 | 9/11/2015 | |||||||
10.17** | Form 8-K | 001-36905-161378936 | 2/2/2016 | |||||||
10.18** | Form 8-K | 001-36905-161472253 | 3/1/2016 | |||||||
10.19** | Form 10-K | 001-36905-161510399 | 3/16/2016 | |||||||
10.20(a) | Form 10-K | 001-36905-161510399 | 3/16/2016 | |||||||
10.20(b) | Form 10-K | 001-36905-17665133 | 3/3/2017 | |||||||
10.21** | Form 10-Q | 001-36905-161653403 | 5/16/2016 | |||||||
10.22(a)** | Form S-8 | 333-211887-161700155 | 6/7/2016 | |||||||
10.22(b)** | Form 8-K | 001-36905-161841057 | 8/18/2016 | |||||||
67
10.22(c)** | Form S-8 | 333-211887-161700155 | 6/7/2016 | |||||||
10.22(d)** | Form 10 | 001-36905-15904590 | 6/1/2015 | |||||||
10.22(e)** | Form S-8 | 333-211887-161700155 | 6/7/2016 | |||||||
10.22(f)** | Form 10-K | 001-36905-17665133 | 3/3/2017 | |||||||
10.22(g)** | SeaSpine Holdings Corporation Amended and Restated 2015 Incentive Award Plan - Form of Restricted Stock Unit Award Grant Notice and Restricted Stock Unit Award Agreement. (used for grants on and after February 1, 2018) | X | ||||||||
10.23** | Form 10-Q | 001-36905-17818719 | 5/5/2017 | |||||||
21.1 | Form 10-K | 001-36905-161510399 | 3/16/2016 | |||||||
23.1 | X | |||||||||
23.2 | X | |||||||||
24.1 | Power of Attorney (included on the signatures page) | X | ||||||||
31.1 | X | |||||||||
31.2 | X | |||||||||
68
32.1*** | X | |||||||||
32.2*** | X | |||||||||
†101.INS | XBRL Instance Document | X | ||||||||
†101.SCH | XBRL Taxonomy Extension Schema Document | X | ||||||||
†101.CAL | XBRL Taxonomy Extension Calculation Linkbase Document | X | ||||||||
†101.DEF | XBRL Definition Linkbase Document | X | ||||||||
†101.LAB | XBRL Taxonomy Extension Labels Linkbase Document | X | ||||||||
†101.PRE | XBRL Taxonomy Extension Presentation Linkbase Document | X | ||||||||
* | Confidential treatment has been requested or granted to certain confidential information contained in this exhibit. Such information was omitted from this exhibit by means of redacting a portion of the text and replacing it with an asterisk. We have filed separately with the SEC an unredacted copy of the exhibit. |
# | Certain schedules and attachments referenced in this agreement have been omitted in accordance with Item 601(b)(2) of Regulation S-K. A copy of any omitted schedule and attachment will be furnished supplementally to the SEC upon request. |
** | Indicates management contract or compensatory plan or arrangement. |
*** | These certifications are being furnished solely to accompany this report pursuant to 18 U.S.C. 1350, and are not being filed for purposes of Section 18 of the Securities Exchange Act of 1934 and are not to be incorporated by reference into any filing of the registrant, whether made before or after the date hereof, regardless of any general incorporation by reference language in such filing. |
† | The financial information of SeaSpine Holdings Corporation Annual Report on Form 10-K for the year ended December 31, 2017 filed on March 2, 2018 formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Statements of Operations, (ii) the Consolidated Statements of Comprehensive Loss, (iii) the Consolidated Balance Sheets, (iv) Parenthetical Data to the Consolidated Balance Sheets, (v) the Consolidated Statements of Cash Flows, (vi) the Consolidated Statements of Equity, and (vii) Notes to Consolidated Financial Statements, is furnished electronically herewith. |
ITEM 16. | FORM 10-K SUMMARY |
None.
69
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
SEASPINE HOLDINGS CORPORATION | |||
Date: | March 2, 2018 | /s/ Keith C. Valentine | |
Keith C. Valentine | |||
President and Chief Executive Officer | |||
70
Power of Attorney
KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Keith C. Valentine and John J. Bostjancic, jointly and severally, his or her attorneys-in-fact, each with the power of substitution, for him or her in any and all capacities, to sign any amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated:
Signature | Title | Date | ||
/s/ Keith C. Valentine | President, Chief Executive Officer and Director (Principal Executive Officer) | March 2, 2018 | ||
Keith C. Valentine | ||||
/s/ John J. Bostjancic | Chief Financial Officer (Principal Financial and Accounting Officer) | March 2, 2018 | ||
John J. Bostjancic | ||||
/s/ Kirtley C. Stephenson | Chairman of the Board | March 2, 2018 | ||
Kirtley C. Stephenson | ||||
/s/ Stuart M. Essig, Ph.D. | Lead Independent Director | March 2, 2018 | ||
Stuart M. Essig, Ph.D. | ||||
/s/ Cheryl R. Blanchard, Ph.D. | Director | March 2, 2018 | ||
Cheryl R. Blanchard, Ph.D. | ||||
/s/ Keith Bradley Ph.D. | Director | March 2, 2018 | ||
Keith Bradley Ph.D. | ||||
/s/ Michael Fekete | Director | March 2, 2018 | ||
Michael Fekete | ||||
/s/ John B. Henneman III | Director | March 2, 2018 | ||
John B. Henneman III | ||||
/s/ James M. Sullivan | Director | March 2, 2018 | ||
James M. Sullivan | ||||
71
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Stockholders and the Board of Directors of SeaSpine Holdings Corporation
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheet of SeaSpine Holdings Corporation and subsidiaries (the Company) as of December 31, 2017, the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows, for the year then ended, and the related notes and schedule (collectively, the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2017, and the results of its operations and its cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.
Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provides a reasonable basis for our opinion.
We have served as the Company's auditor since 2017.
/s/ RSM US LLP
Los Angeles, California
March 2, 2018
F- 1
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of SeaSpine Holdings Corporation:
In our opinion, the consolidated balance sheet as of December 31, 2016 and the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows for each of the two years in the period ended December 31, 2016 present fairly, in all material respects, the financial position of SeaSpine Holdings Corporation and its subsidiaries as of December 31, 2016, and the results of their operations and their cash flows for each of the two years in the period ended December 31, 2016 , in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the schedule of valuation and qualifying accounts for each of the two years in the period ended December 31, 2016 presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. These financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements and financial statement schedule based on our audits. We conducted our audits of these financial statements in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
/s/ PricewaterhouseCoopers LLP
San Diego, California
March 3, 2017
F- 2
SEASPINE HOLDINGS CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
Total revenue, net | $ | 131,814 | $ | 128,860 | $ | 133,178 | |||||
Cost of goods sold | 51,826 | 55,544 | 61,119 | ||||||||
Gross profit | 79,988 | 73,316 | 72,059 | ||||||||
Operating expenses: | |||||||||||
Selling, general and administrative | 97,303 | 101,065 | 110,551 | ||||||||
Research and development | 12,180 | 11,442 | 8,353 | ||||||||
Intangible amortization | 3,168 | 4,309 | 5,331 | ||||||||
Total operating expenses | 112,651 | 116,816 | 124,235 | ||||||||
Operating loss | (32,663 | ) | (43,500 | ) | (52,176 | ) | |||||
Other (income) expense, net | (430 | ) | 264 | 877 | |||||||
Loss before income taxes | (32,233 | ) | (43,764 | ) | (53,053 | ) | |||||
Provision (benefit) for income taxes | (118 | ) | (552 | ) | 2,479 | ||||||
Net loss | $ | (32,115 | ) | $ | (43,212 | ) | $ | (55,532 | ) | ||
Net Loss per share, basic and diluted | $ | (2.58 | ) | $ | (3.85 | ) | $ | (4.99 | ) | ||
Weighted average shares used to compute basic and diluted net loss per share | 12,426 | 11,222 | 11,139 | ||||||||
The accompanying notes are an integral part of these consolidated financial statements.
F- 3
SEASPINE HOLDINGS CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS
(In thousands)
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
Net loss | $ | (32,115 | ) | $ | (43,212 | ) | $ | (55,532 | ) | ||
Other comprehensive income (loss) | |||||||||||
Change in foreign currency translation adjustments | 678 | (119 | ) | 498 | |||||||
Comprehensive loss | $ | (31,437 | ) | $ | (43,331 | ) | $ | (55,034 | ) | ||
The accompanying notes are an integral part of these consolidated financial statements.
F- 4
SEASPINE HOLDINGS CORPORATION
CONSOLIDATED BALANCE SHEETS
(In thousands, except par value data)
December 31, 2017 | December 31, 2016 | ||||||
ASSETS | |||||||
Current assets: | |||||||
Cash and cash equivalents | $ | 10,788 | $ | 14,566 | |||
Trade accounts receivable, net of allowances of $466 and $483 | 21,872 | 20,982 | |||||
Inventories | 41,721 | 45,299 | |||||
Prepaid expenses and other current assets | 2,037 | 1,813 | |||||
Total current assets | 76,418 | 82,660 | |||||
Property, plant and equipment, net | 22,063 | 21,863 | |||||
Intangible assets, net | 35,207 | 41,785 | |||||
Other assets | 786 | 857 | |||||
Total assets | $ | 134,474 | $ | 147,165 | |||
LIABILITIES AND STOCKHOLDERS' EQUITY | |||||||
Current liabilities: | |||||||
Short-term debt | $ | — | $ | 445 | |||
Accounts payable, trade | 7,385 | 8,537 | |||||
Accrued compensation | 5,833 | 4,393 | |||||
Accrued commissions | 5,793 | 4,398 | |||||
Contingent consideration liabilities | 207 | 2,855 | |||||
Other accrued expenses and current liabilities | 3,939 | 3,790 | |||||
Total current liabilities | 23,157 | 24,418 | |||||
Long-term borrowings under credit facility | — | 3,835 | |||||
Contingent consideration liabilities | 4,228 | 5,125 | |||||
Other liabilities | 1,436 | 2,810 | |||||
Total liabilities | 28,821 | 36,188 | |||||
Commitments and contingencies | |||||||
Stockholders' equity: | |||||||
Preferred stock, $0.01 par value; 15,000 authorized; no shares issued and outstanding at December 31, 2017 and December 31, 2016 | — | — | |||||
Common stock, $0.01 par value; 60,000 authorized; 13,508 and 11,258 shares issued and outstanding at December 31, 2017 and 2016, respectively | 135 | 113 | |||||
Additional paid-in capital | 206,844 | 180,753 | |||||
Accumulated other comprehensive income | 1,950 | 1,272 | |||||
Accumulated deficit | (103,276 | ) | (71,161 | ) | |||
Total stockholders' equity | 105,653 | 110,977 | |||||
Total liabilities and stockholders' equity | $ | 134,474 | $ | 147,165 | |||
The accompanying notes are an integral part of these consolidated financial statements.
F- 5
SEASPINE HOLDINGS CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
OPERATING ACTIVITIES: | |||||||||||
Net loss | $ | (32,115 | ) | $ | (43,212 | ) | $ | (55,532 | ) | ||
Adjustments to reconcile net loss to net cash used in operating activities: | |||||||||||
Depreciation and amortization | 10,871 | 11,758 | 12,445 | ||||||||
Instrument replacement expense | 1,848 | 1,389 | 1,228 | ||||||||
Impairment of spinal instruments | — | 919 | 175 | ||||||||
Impairment of construction in progress | — | — | 419 | ||||||||
Provision for excess and obsolete inventories | 4,399 | 5,402 | 7,327 | ||||||||
Amortization of debt issuance costs | 139 | 139 | — | ||||||||
Deferred income tax benefit | (78 | ) | (10 | ) | (282 | ) | |||||
Stock-based compensation | 6,067 | 6,438 | 3,816 | ||||||||
Gain from change in fair value of contingent consideration liabilities | (975 | ) | (270 | ) | — | ||||||
Gain from release of a foreign non-income tax liability | (1,512 | ) | — | — | |||||||
Allocation of non-cash charges from Integra | — | — | 563 | ||||||||
Changes in assets and liabilities | |||||||||||
Accounts receivable | (612 | ) | 4,295 | (2,004 | ) | ||||||
Inventories | 1,206 | 1,404 | (8,365 | ) | |||||||
Prepaid expenses and other current assets | (211 | ) | 1,877 | (2,867 | ) | ||||||
Other non-current assets | 72 | 79 | 1,335 | ||||||||
Accounts payable | (2,080 | ) | (5,006 | ) | 5,818 | ||||||
Income taxes payable | — | — | (320 | ) | |||||||
Accrued commissions | 1,394 | 166 | 335 | ||||||||
Other accrued expenses and current liabilities | 2,630 | 167 | 3,316 | ||||||||
Other non-current liabilities | 335 | 195 | 27 | ||||||||
Net cash used in operating activities | (8,622 | ) | (14,270 | ) | (32,566 | ) | |||||
INVESTING ACTIVITIES: | |||||||||||
Purchases of property and equipment | (7,446 | ) | (7,569 | ) | (11,555 | ) | |||||
Additions to technology assets | (200 | ) | (1,150 | ) | (150 | ) | |||||
Net cash used in investing activities | (7,646 | ) | (8,719 | ) | (11,705 | ) | |||||
FINANCING ACTIVITIES: | |||||||||||
Borrowings under credit facility | — | 3,300 | — | ||||||||
Borrowings under short term debt | — | 1,202 | — | ||||||||
Repayments of credit facility | (4,020 | ) | — | — | |||||||
Repayments of short term debt | (445 | ) | (757 | ) | — | ||||||
Proceeds from issuance of common stock- employee stock purchase plan and exercise of stock options | 1,021 | 691 | — | ||||||||
Proceeds from issuance of common stock, net of offering costs- ATM transactions | 15,557 | — | — | ||||||||
Repurchases of common stock for income tax withheld upon vesting of restricted stock | (50 | ) | (160 | ) | — | ||||||
Payment of contingent consideration liabilities in connection with acquisition of business (see Note 6) | (23 | ) | — | — | |||||||
Integra net investment prior to the spin-off | — | — | 77,173 | ||||||||
Debt issuance costs | — | — | (80 | ) | |||||||
Excess tax benefits from stock-based compensation arrangements | — | — | 37 | ||||||||
Net cash provided by financing activities | 12,040 | 4,276 | 77,130 | ||||||||
Effect of exchange rate changes on cash and cash equivalents | 450 | (150 | ) | (82 | ) | ||||||
Net change in cash and cash equivalents | (3,778 | ) | (18,863 | ) | 32,777 | ||||||
Cash and cash equivalents at beginning of period | 14,566 | 33,429 | 652 | ||||||||
Cash and cash equivalents at end of period | $ | 10,788 | $ | 14,566 | $ | 33,429 | |||||
F- 6
SEASPINE HOLDINGS CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS (CONTINUED)
(In thousands)
Non-cash investing activities: | |||||||||||
Property and equipment in liabilities | $ | 925 | $ | 802 | $ | 638 | |||||
Fair value of intangible assets acquired through acquisition of business (see Note 6) | $ | — | $ | 8,250 | $ | — | |||||
Fair value of contingent consideration liabilities in connection with acquisition of business (see Note 7) | $ | — | $ | 7,980 | $ | — | |||||
Non-cash financing activities: | |||||||||||
Settlement of related-party payable to Integra net investment | $ | — | $ | — | $ | 29,022 | |||||
Debt issuance cost | $ | — | $ | — | $ | 328 | |||||
Supplemental cash flow information: | |||||||||||
Interest paid | $ | 373 | $ | — | $ | — | |||||
Income taxes paid (refunded) | $ | 89 | $ | (513 | ) | $ | 2,982 | ||||
The accompanying notes are an integral part of these consolidated financial statements.
F- 7
SEASPINE HOLDINGS CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
(In thousands)
Common Stock | Additional | Integra | Accumulated Other | Total | ||||||||||||||||||||||
Number of | Paid-In | Net | Comprehensive | Accumulated | Stockholders' | |||||||||||||||||||||
Shares | Amount | Capital | Investment | Income (Loss) | Deficit | Equity | ||||||||||||||||||||
Balance December 31, 2014 | — | $ | — | $ | — | $ | 90,391 | $ | 893 | $ | — | $ | 91,284 | |||||||||||||
Net loss | — | — | — | (27,583 | ) | — | (27,949 | ) | (55,532 | ) | ||||||||||||||||
Net transfer from Integra | — | — | — | 107,433 | — | — | 107,433 | |||||||||||||||||||
Reclassification of parent company investment in connection with spin-off | — | — | 170,241 | (170,241 | ) | — | — | |||||||||||||||||||
Foreign currency translation adjustment | — | — | — | — | 498 | — | 498 | |||||||||||||||||||
Issuance of common stock in connection with spin-off | 11,048 | 110 | (110 | ) | — | — | — | — | ||||||||||||||||||
Restricted stock issued | 66 | 1 | (1 | ) | — | — | — | — | ||||||||||||||||||
Restricted stock forfeited | (12 | ) | — | — | — | — | — | — | ||||||||||||||||||
Stock-based compensation | — | — | 3,619 | — | — | — | 3,619 | |||||||||||||||||||
Excess tax benefits from stock-based compensation | — | — | 37 | — | — | — | 37 | |||||||||||||||||||
Balance December 31, 2015 | 11,102 | $ | 111 | $ | 173,786 | $ | — | $ | 1,391 | $ | (27,949 | ) | $ | 147,339 | ||||||||||||
Net loss | — | — | — | — | — | (43,212 | ) | (43,212 | ) | |||||||||||||||||
Foreign currency translation adjustment | — | — | — | — | (119 | ) | — | (119 | ) | |||||||||||||||||
Restricted stock issued | 79 | 1 | (1 | ) | — | — | — | — | ||||||||||||||||||
Issuance of common stock under employee stock purchase plan | 90 | 1 | 690 | — | — | — | 691 | |||||||||||||||||||
Restricted stock forfeited | (1 | ) | — | — | — | — | — | — | ||||||||||||||||||
Repurchases of common stock for income tax withheld upon vesting of restricted stock awards | (12 | ) | — | (160 | ) | — | — | — | (160 | ) | ||||||||||||||||
Stock-based compensation | — | — | 6,438 | — | — | — | 6,438 | |||||||||||||||||||
Balance December 31, 2016 | 11,258 | $ | 113 | $ | 180,753 | $ | — | $ | 1,272 | $ | (71,161 | ) | $ | 110,977 | ||||||||||||
Net loss | — | — | — | — | — | (32,115 | ) | (32,115 | ) | |||||||||||||||||
Foreign currency translation adjustment | — | — | — | — | 678 | — | 678 | |||||||||||||||||||
Restricted stock issued | 253 | 2 | 968 | — | 970 | |||||||||||||||||||||
Issuance of common stock under employee stock purchase plan | 150 | 2 | 984 | — | — | — | 986 | |||||||||||||||||||
Issuance of common stock- NLT Spine Ltd contingent closing consideration | 350 | 3 | 2,545 | — | — | — | 2,548 | |||||||||||||||||||
Issuance of common stock- ATM transactions | 1,500 | 15 | 15,542 | — | — | — | 15,557 | |||||||||||||||||||
Issuance of common stock- exercise of stock options | 5 | — | 35 | — | — | — | 35 | |||||||||||||||||||
Restricted stock awards forfeited | (1 | ) | — | — | — | — | — | — | ||||||||||||||||||
Repurchases of common stock for income tax withheld upon vesting of restricted stock | (7 | ) | — | (50 | ) | — | — | — | (50 | ) | ||||||||||||||||
Stock-based compensation | — | — | 6,067 | — | — | — | 6,067 | |||||||||||||||||||
Balance December 31, 2017 | 13,508 | $ | 135 | $ | 206,844 | $ | — | $ | 1,950 | $ | (103,276 | ) | $ | 105,653 | ||||||||||||
The accompanying notes are an integral part of these consolidated financial statements.
F- 8
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. BUSINESS AND BASIS OF PRESENTATION
Business
SeaSpine Holdings Corporation was incorporated in Delaware on February 12, 2015 in connection with the spin-off of the orthobiologics and spinal implant business of Integra LifeSciences Holdings Corporation, a diversified medical technology company. The spin-off occurred on July 1, 2015. Unless the context indicates otherwise, (i) references to "SeaSpine" or the "Company" refer to SeaSpine Holdings Corporation and its wholly-owned subsidiaries, and (ii) references to "Integra" refer to Integra LifeSciences Holdings Corporation and its subsidiaries other than SeaSpine.
Basis of Presentation and Principles of Consolidation
The Company prepared the consolidated financial statements included in this report in accordance with accounting principles generally accepted in the U.S. (GAAP). For periods prior to the spin-off, the Company’s consolidated financial statements were prepared on a stand-alone basis and derived from Integra's consolidated financial statements and accounting records related to its orthobiologics and spinal implant business. The consolidated financial statements include certain assets and liabilities that have historically been held at the Integra level but were specifically identifiable or otherwise attributable to the Company. All significant intra-company transactions within Integra's pre-spin off orthobiologics and spinal implant business have been eliminated. All significant transactions between the Company and other businesses of Integra before the spin-off are included in these consolidated financial statements. See Note 3, “Transactions with Integra,” for further information regarding the relationships the Company has with Integra.
For periods subsequent to the spin-off, the consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. Intercompany accounts and transactions have been eliminated in consolidation.
2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Use of Estimates
The preparation of consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent liabilities, and the reported amounts of revenues and expenses. Significant estimates affecting amounts reported or disclosed in the consolidated financial statements include allowances for doubtful accounts receivable and sales returns and other credits, net realizable value of inventories, discount rates and estimated projected cash flows used to value and test impairments of identifiable intangible and long-lived assets, depreciation and amortization periods for identifiable intangible and long-lived assets, assumptions related to the timing and probability of product launch dates, discount rates matched to the estimated timing of payments, probability of success rates, and estimated net sales for contingent considerations in business combinations, computation of taxes, valuation allowances recorded against deferred tax assets, the valuation of stock-based compensation and loss contingencies. These estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the current circumstances. Actual results could differ from these estimates.
Cash and Cash Equivalents
The Company considers all highly liquid investments with a maturity of 90 days or less at the date of purchase to be cash equivalents. Cash and cash equivalents include cash readily available in checking and money market accounts.
Fair Value of Financial Instruments
The carrying amounts of cash, cash equivalents, receivables, accounts payable, accrued expenses, and short-term debt at December 31, 2017 and 2016, are considered to approximate fair value because of the short term nature of those items.
The Company measures certain assets and liabilities in accordance with authoritative guidance which requires fair value measurements to be classified and disclosed in one of the following three categories:
F- 9
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
Level 1: Quoted prices (unadjusted) in active markets that are accessible at the measurement date for assets or liabilities.
Level 2: Observable prices that are based on inputs not quoted on active markets, but corroborated by market data.
Level 3: Unobservable inputs are used when little or no market data is available.
The carrying amount of long-term debt outstanding at December 31, 2016 pursuant to the Company’s credit facility with Wells Fargo Bank, National Association approximated fair value as interest rates on this instrument approximated the borrowing rates currently available for debt with similar terms and maturities. This fair value measurement is categorized within Level 2 of the fair value hierarchy.
The carrying amounts of contingent consideration liabilities at December 31, 2017 and 2016 pursuant to the business combinations (see Note 6- Business Combinations) are measured at fair value on a recurring basis, and are classified within Level 3 of the fair value hierarchy because they use significant unobservable inputs.
Trade Accounts Receivable and Allowances
Trade accounts receivable in the accompanying consolidated balance sheets are presented net of allowances for doubtful accounts and sales returns and other credits.The Company grants credit to customers in the normal course of business, but generally does not require collateral or any other security to support its receivables.
The Company evaluates the collectability of accounts receivable based on a combination of factors. In circumstances where a specific customer is unable to meet its financial obligations to the Company, a provision to the allowances for doubtful accounts is recorded to reduce the net recognized receivable to the amount that is reasonably expected to be collected. For all other customers, a provision to the allowances for doubtful accounts is recorded based on factors including the length of time the receivables are past due, the current business environment and the Company’s historical experience. Provisions to the allowances for doubtful accounts are recorded to selling, general and administrative expenses. Account balances are charged off against the allowance when it is probable that the receivable will not be recovered.
Inventories
Inventories, consisting of purchased materials, direct labor and manufacturing overhead, are stated at the lower of cost, the value determined by the first-in, first-out method, or market.
At each balance sheet date, the Company evaluates inventories for excess quantities, obsolescence or shelf life expiration. This evaluation includes analysis of the Company's current and future strategic plans, historical sales levels by product, projections of future demand, the risk of technological or competitive obsolescence for products, general market conditions, a review of the shelf life expiration dates for products, as well as the feasibility of reworking or using excess or obsolete products or components in the production or assembly of other products that are not obsolete or for which there are not excess quantities in inventory. To the extent that management determines there are excess or obsolete inventory or quantities with a shelf life that is too near its expiration for the Company to reasonably expect that it can sell those products prior to their expiration, the Company adjusts the carrying value to estimated net realizable value.
The Company capitalizes inventory costs associated with certain products prior to regulatory approval, based on management’s judgment of probable economic benefit. The Company could be required to expense previously capitalized costs related to pre-approval inventory upon a change in such judgment, due to, among other potential factors, a denial or delay of approval by necessary regulatory bodies or a decision by management to discontinue the related development program. No such amounts were capitalized at December 31, 2017 or 2016.
Property, Plant, and Equipment
Property, plant and equipment are stated at historical cost less accumulated depreciation and any impairment charges. The
Company provides for depreciation using the straight-line method over the estimated useful lives of the assets. Leasehold improvements are amortized over the lesser of the lease term or the useful life. The cost of major additions and improvements is capitalized, while maintenance and repair costs that do not improve or extend the lives of the respective assets are charged to operations as incurred. The cost of computer software obtained for internal use is accounted for in accordance with the Accounting Standards Codification 350-40, Internal-Use Software.
F- 10
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
The cost of purchased spinal instruments which the Company consigns to hospitals and independent sales agents to support surgeries is initially capitalized as construction in progress. The amount is then reclassified to spinal instruments and sets and depreciation is initiated when instruments are put together in a newly built set with spinal implants, or directly expensed for the instruments that are used to replace damaged instruments in an existing set. The depreciation expense and direct expense for replacement instruments are recorded in selling, general and administrative expense.
Business Combinations
The purchase price of each acquisition is allocated to the net assets acquired based on estimates of their fair values at the date of the acquisition. Any purchase price in excess of these net assets is recorded as goodwill, and any fair value of these net assets, excluding goodwill, in excess of the purchase price is recorded as a bargain purchase gain. The allocation of purchase price in certain cases may be subject to revision based on the final determination of fair values during the measurement period, which may be up to one year from the acquisition date.
Contingent consideration liability is recognized at the estimated fair value on the acquisition date. Subsequent changes to the fair value of contingent consideration liability are recognized in the statement of operations. Contingent consideration liability related to acquisitions consist of commercial milestone payments and contingent royalty payments, and are valued using discounted cash flow techniques. The fair value of commercial milestone payments and contingent royalty payments reflects management’s expectations of probability and amount of payment, and increases or decreases as the probability and amount of payment or expectation of timing of payment changes.
Identifiable Intangible Assets
Identifiable intangible assets are initially recorded at fair value at the time of acquisition generally using an income or cost approach. The Company capitalizes costs incurred to renew or extend the term of recognized intangible assets and amortizes those costs over their expected useful lives.
Impairment of Long-Lived Assets
Long-lived assets held and used by the Company, including property, plant and equipment and intangible assets, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. For purposes of evaluating the recoverability of long-lived assets to be held and used, a recoverability test is performed using projected undiscounted net cash flows applicable to the long-lived assets. If an impairment exists, the amount of such impairment is calculated based on the estimated fair value of the asset. Impairments to long-lived assets to be disposed of are recorded based upon the difference between the carrying value and the fair value of the applicable assets. There was no impairment of intangible or tangible long-lived assets in any of the periods presented.
Foreign Currency
The Company generates revenues outside the United States in multiple foreign currencies including euros, British pounds, Swiss francs and New Zealand dollars, and in U.S. dollar-denominated transactions conducted with customers who generate revenue in currencies other than the U.S. dollar. The Company also incurs operating expenses in euros. All assets and liabilities of foreign subsidiaries which have a functional currency other than the U.S. dollar are translated at the rate of exchange at year-end, while elements of the income statement are translated at the average exchange rates in effect during the year. The net effect of these translation adjustments is shown as a component of accumulated other comprehensive income (loss). These currency translation adjustments are not currently adjusted for income taxes as they relate to permanent investments in non-U.S. subsidiaries. Foreign currency transaction gains and losses are reported in other income (expense), net.
Income Taxes
In the Company’s consolidated financial statements prior to the spin-off, income tax expense and deferred tax balances were calculated on a separate return basis although the Company’s operations had historically been included in the tax returns filed by the respective Integra entities of which the Company’s business was a part.
Prior to the spin-off, the Company maintained an income taxes payable to/from account with Integra. The Company was deemed to settle current tax balances with the Integra tax paying entities in the respective jurisdictions. The Company’s current income tax balances were reflected as income taxes payable and settlements, which are deemed to occur in the year following incurrence, were reflected as changes in net Integra investment in the consolidated balance sheets.
F- 11
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
The Company recognizes tax benefits in its financial statements when its uncertain tax positions are more likely than not to be sustained upon audit. The amount recognized is measured as the largest amount of benefit that is greater than 50 percent likely of being realized upon ultimate settlement. The Company recognizes deferred tax assets for deductible temporary differences, operating loss carryforwards and tax credit carryforwards. Deferred tax assets are reduced by valuation allowance if it is more likely than not that some portion, or all, of the deferred tax assets will not be realized.
Revenue Recognition
Net sales are derived primarily from the sale of orthobiologics and spinal implant products globally. Sales are reported net of returns, rebates, group purchasing organization fees and other customer allowances. Allowances and estimates of returns and other credits are recorded in the sales returns reserve.
Revenue is recognized when persuasive evidence of an arrangement exists, delivery has occurred title and risk of loss have passed to the customer, there is a fixed or determinable sales price and collectability of that sales price is reasonably assured.
In the United States, the Company generates most of its revenue by consigning its orthobiologics products and by consigning or loaning its spinal implant sets to hospitals and independent sales agents, who in turn either deliver them to hospitals for a single surgical procedure, after which they are returned to the Company, or leave them with hospitals that are high volume users for multiple procedures. The spinal implant sets typically contain the instruments, disposables, and spinal implants required to complete a surgery. The Company ships replacement inventory to independent sales agents to replace the consigned inventory used in surgeries. The Company maintains and replenishes loaned sets at its facility and returns them to a hospital or independent sales agent for the next procedure. The Company recognizes revenue on these consigned or loaned products when they have been used or implanted in a surgical procedure.
For all other sales transactions, including sales to international stocking distributors and private label partners, the Company recognizes revenue when the products are shipped to the customer or stocking distributors and the transfer of title and risk of loss occurs. There is generally no customer acceptance or other condition that prevents the Company from recognizing revenue in accordance with the delivery terms for these sales transactions.
Product royalties account for less than 1% of total revenue for any of the periods presented, and are estimated and recognized in the same period that the royalty-based products are sold by licensees. The Company estimates and recognizes royalty revenue based upon communication with licensees, historical information and expected sales trends. Differences between actual revenues and estimated royalty revenues are adjusted in the period in which they become known, which is typically the following quarter. Historically, such adjustments have not been material.
Shipping and Handling Fees and Costs
Amounts billed to customers for shipping and handling are included in revenues. The related shipping and freight charges incurred by the Company are included in cost of goods sold. Shipping and handling costs of $1.6 million, $1.6 million, and $1.2 million for product shipments for loaning of spinal implants and instrumentation sets and costs incurred for internal movement of inventory were recorded in selling, general and administrative expense during the years ended December 31, 2017, 2016 and 2015, respectively.
Research and Development
Research and development costs, including salaries, stock-based compensation, depreciation, consultant and other external fees, and facility costs directly attributable to research and development activities, are expensed in the period in which they are incurred.
Stock-Based Compensation
For periods prior to the spin-off, the Company’s stock-based compensation was derived from the equity awards granted by Integra to individuals who would become the Company’s employees. Stock-based compensation expense has been allocated to the Company based on the awards and terms previously granted to its employees. As those stock-based compensation plans were Integra’s plans, the amounts have been recognized in the consolidated statements of operations. For periods after the spin-off, the Company's stock-based compensation has been recognized through the consolidated statement of operations and the Company's additional paid-in capital account on the consolidated balance sheet.
F- 12
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
The Company applies the authoritative guidance for stock-based compensation. This guidance requires companies to recognize the expense related to the fair value of their stock-based compensation awards. Stock-based compensation expense for stock option awards was based on the fair value on the grant date using the Black-Scholes-Merton option pricing model. The fair value of restricted stock granted prior to the spin-off was based on the Integra’s stock price at the grant date, and the fair value of restricted stock granted after the spin-off was based on the Company's stock price at the grant date. The long form method was used in the determination of the windfall tax benefit in accordance with the guidance.
The stock-based compensation is initially measured at the fair value of the awards on the grant date and is then recognized on a ratable basis in the financial statements over the requisite service period of the award. Stock-based compensation expense was $6.1 million in 2017, $6.4 million in 2016 and $4.4 million in 2015.
Concentration of Credit Risk
Financial instruments, which potentially subject the Company to concentrations of credit risk, consist principally of cash, which is held at major financial institutions, and trade receivables.
The Company’s products are sold on an uncollateralized basis and on credit terms based upon a credit risk assessment of each customer. A portion of the Company’s trade receivables to customers outside the United States includes sales to foreign stocking distributors, who then sell to government owned or supported healthcare systems. The ongoing economic conditions in certain European countries, especially Greece, Ireland, Italy, Portugal and Spain remain uncertain. Accounts receivable from customers in these countries are not a material amount of the Company’s overall receivables.
None of the Company’s customers accounted for 10% or more of the net sales or accounts receivable for any of the periods presented.
Recent Accounting Standards Not Yet Adopted
The Company qualifies as an “emerging growth company” (EGC) pursuant to the provisions of the Jumpstart Our Business Startups (JOBS) Act and elected to take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act of 1933, as amended, which permits EGCs to defer compliance with new or revised accounting standards (the EGC extension) until non-issuers are required to comply with such standards. Accordingly, so long as the Company continues to qualify as an EGC, the Company will not have to adopt or comply with new or revised accounting standards until non-issuers are required to adopt or comply with such standards.
In May 2014, the Financial Accounting Standards Board (FASB) issued Update No. 2014-09, Revenue from Contracts with
Customers (Topic 606). The new standard provides a five-step approach to be applied to all contracts with customers. The new standard also requires expanded disclosure about revenue recognition. The new standard as amended by ASU 2015-14, ASU 2016-10 and ASU 2016-12, will be effective for the Company beginning on January 1, 2019, and for interim periods within annual periods beginning on January 1, 2020. The Company performed a preliminary assessment of the impact of this new standard on its consolidated financial statements. In assessing the impact, the Company has outlined all revenue streams, and has considered the five steps outlined in the standard for product sales, from which substantially all the Company's revenue is generated. The Company plans to adopt the new standard using the modified retrospective method. The Company will continue to evaluate the future impact of the new standard.
In February 2016, the FASB issued Update No. 2016-02, Leases (Topic 842). The new standard requires lessees to recognize lease liabilities and corresponding right-of-use assets for all leases with lease terms of greater than twelve months. It also changes the definition of a lease and expands the disclosure requirements of lease arrangements. The new standard must be adopted using the modified retrospective approach. The standard will be effective for the Company beginning on January 1, 2020, and interim periods within annual periods beginning on January 1, 2021, with early adoption permitted. The Company does not plan to early adopt and expects to apply the transition practical expedients allowed by the standard. Note 9 to the Consolidated Financial Statements provides details on the Company’s current lease arrangements. While the Company continues to evaluate the impact of this new standard on its consolidated financial statements, the Company currently expects the primary impact will be to record right-of-use assets and lease liabilities for existing operating leases in the consolidated balance sheets. The Company does not currently expect the adoption of this new standard to have a material impact on its consolidated results of operations or cash flows.
In August 2016, the FASB issued Update No. 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments. This new standard addresses eight specific cash flow issues related to cash receipts and cash payments
F- 13
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
with the objective of reducing the existing diversity of presentation and classification in the statement of cash flows. The new standard will be effective for the Company beginning on January 1, 2019, and interim periods within annual periods beginning on January 1, 2020. Early adoption is permitted and should be applied using a retrospective transition method to each period presented. The Company is in the process of evaluating the impact of this standard on its consolidated financial statements.
In May 2017, the FASB issued Update No. 2017-09, Compensation- Stock Compensation (Topic 718): Scope of Modification Accounting. The new standard provides guidance regarding which changes to the terms or conditions of a share-based payment award require an entity to apply modification accounting in Topic 718. The new standard will be effective for the Company beginning on January 1, 2018, and interim periods within annual periods beginning on January 1, 2018. The new standard should be applied prospectively to an award modified on or after the adoption date. The Company is in the process of evaluating the impact of this standard on its consolidated financial statements.
Recently Adopted Accounting Standards
In July 2015, the FASB issued Update No. 2015-11, Simplifying the Measurement of Inventory (Topic 330). The new guidance
requires an entity to measure inventory within the scope of the amendment at the lower of cost and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The guidance was effective for the Company beginning on January 1, 2017, and interim periods within annual periods beginning on January 1, 2018. Adoption of this new guidance has had no impact on the Company’s consolidated financial statements.
Net Loss Per Share
For periods prior to the spin-off, basic and diluted net loss per share was calculated based on the approximately 11.0 million shares of SeaSpine common stock that were distributed to Integra shareholders on July 1, 2015. Basic and diluted net loss per share was calculated using the weighted-average number of shares of common stock outstanding during the period. The weighted average number of shares used to compute diluted net loss per share excludes any assumed exercise of stock options, any assumed issuance of common stock under restricted stock awards and units, and any assumed issuances under the Company's 2015 Employee Stock Purchase Plan, as the effect, in each case, would be antidilutive. Common stock equivalents of 3.3 million, 3.1 million and 2.0 million shares for the years ended December 31, 2017, 2016 and 2015, respectively, were excluded from the calculation because of their antidilutive effect.
3. TRANSACTIONS WITH INTEGRA
Related-party Transactions
Prior to the spin-off, and pursuant to certain supply agreements subsequent to the spin-off, SeaSpine purchased a portion of raw materials and finished goods from Integra for SeaSpine's Mozaik family of products, and SeaSpine contract manufactured certain finished goods for Integra.The Company's purchases of raw materials and Mozaik product finished goods from Integra for the years ended December 31, 2017, 2016 and 2015 totaled $0.6 million, $1.1 million and $6.2 million, respectively. The Company's sale of finished goods to Integra under its contract manufacturing arrangement for the years ended December 31, 2017 and 2016 totaled $0.4 million and $0.2 million, respectively, and was immaterial for the year ended December 31, 2015.
Pursuant to a transition services agreement, Integra and SeaSpine provided certain services to one another following the spin-off, and Integra and SeaSpine agreed to indemnify each other against certain liabilities arising from their respective businesses. Under this agreement, Integra provided the Company with certain support functions, including information technology, accounting and other financial functions, regulatory affairs and quality assurance, human resources and other administrative support. The Company incurred no costs under the agreement for the year ended December 31, 2017, and approximately $0.3 million and $2.8 million of costs for the years ended December 31, 2016 and 2015, respectively.
Allocated Costs
For periods prior to the spin-off, the consolidated statements of operations included direct expenses for cost of goods sold, research and development, sales and marketing, customer service, and administration as well as allocations of expenses arising from shared services and infrastructure provided by Integra to the Company, such as costs of information technology, including the costs of a multi-year global enterprise resource planning implementation, accounting and legal services, real estate and facilities management, corporate advertising, insurance and treasury services, and other corporate and infrastructure services. These allocations are included in the table below. These expenses were allocated to the Company using estimates that the Company considers to be a reasonable reflection of the utilization of services provided to or benefits received from the Company. The allocation methods include pro-rata basis of revenue, standard cost of sales or other measures. There were no
F- 14
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
allocated costs for each of the years ended December 31, 2017 and 2016.
Year Ended December 31, | ||||
2015 | ||||
(In thousands) | ||||
Cost of goods sold | $ | 488 | ||
Selling, general and administrative | 8,633 | |||
Research and development | 253 | |||
Total Allocated Costs | $ | 9,374 | ||
Included in the above amounts are certain non-cash allocated costs, including stock-based compensation. Such amounts were $0.6 million for the year ended December 31, 2015.
All significant related party transactions between SeaSpine and Integra were included in the consolidated financial statements and, prior to the spin-off, were considered to be effectively settled for cash at the time the transaction was recorded, with the exception of the purchases by SeaSpine from Integra of Mozaik raw materials and finished goods, and fees incurred pursuant to the transition services agreement for all periods presented. The total net effect of the transactions considered to be effectively settled for cash was reflected in the consolidated statement of cash flows as a financing activity.
The following table summarizes the components of the net decrease in Integra net investment for the year ended December 31, 2015. The Integra net investment was reclassified to Additional Paid-in Capital in connection with the spin-off.
Year Ended December 31, | ||||
2015 | ||||
(In thousands) | ||||
Cash pooling and general financing activities (a) | $ | 68,386 | ||
Corporate Allocations (excluding non-cash adjustments) | 8,787 | |||
Total Integra net investment in financing activities within cash flow statement | 77,173 | |||
Non-cash adjustments (b) | 29,806 | |||
Spin-off related adjustment (c) | 161 | |||
Reclassification of Integra net investment in connection with the spin-off | (170,241 | ) | ||
Foreign exchange impact | 293 | |||
Net decrease in Integra investment | $ | (62,808 | ) | |
(a) | Includes financing activities for capital transfers, cash sweeps and other treasury services. |
(b) | Reflects allocation of non-cash charges from Integra, stock-based compensation and settlement of related-party payable to Integra net investment. |
(c) | During the year ended December 31, 2015, certain spin-off related adjustments were recorded in stockholders' equity, to reflect the appropriate opening balances related to SeaSpine’s legal entities on July 1, 2015, which was the date when SeaSpine became a separate, independent, publicly-traded company. |
4. DEBT AND INTEREST
Credit Agreement
In December 2015, the Company entered into a three-year credit facility with Wells Fargo Bank, National Association, which was subsequently amended in October 2016 to address the Company's acquisition of certain assets of NLT (as described in Note 6, "Business Combinations," below) (as amended, the Credit Facility). The Credit Facility provides an asset-backed revolving line of credit of up to $30.0 million in borrowing capacity with a maturity date of December 24, 2018, which maturity date is subject to a one-time, one-year extension at the Company's election. In connection with the Credit Facility, the Company was required to become a guarantor and to provide a security interest in substantially all its assets for the benefit of the counterparty.
Borrowings under the Credit Facility accrue interest at the rate then applicable to base rate loans (as customarily defined), unless and until converted into LIBOR rate loans (as customarily defined) in accordance with the terms of the Credit Facility. Borrowings bear interest at a floating annual rate equal to (a) during any month for which the Company's average excess availability (as
F- 15
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
customarily defined) is greater than $20.0 million, (i) base rate plus 1.25 percentage points for base rate loans and (ii) LIBOR rate plus 2.25 percentage points for LIBOR rate loans, (b) during any month for which the Company's average excess availability is greater than $10.0 million but less than or equal to $20.0 million, (i) base rate plus 1.50 percentage points for base rate loans and (ii) LIBOR rate plus 2.50 percentage points for LIBOR rate loans and (c) during any month for which the Company's average excess availability is less than or equal to $10.0 million, (i) base rate plus 1.75 percentage points for base rate loans and (ii) LIBOR rate plus 2.75 percentage points for LIBOR rate loans. The Company will also pay an unused line fee in an amount equal to 0.375% per annum of the unused Credit Facility amount. The unused line fee is due and payable on the first day of each month.
In September 2016, the Company borrowed $3.3 million under the Credit Facility. The Company elected to have the LIBOR rate apply to the amount borrowed with an interest period of six months commencing on September 28, 2016, which was further extended for another interest period of six months commencing on March 28, 2017. During the year ended December 31, 2017, the Company paid off the entire amount borrowed plus accrued interest, totaling $4.1 million. There were no amounts outstanding under the Credit Facility at December 31, 2017, and $3.8 million outstanding at December 31, 2016. At December 31, 2017, the Company had $20.5 million of current borrowing capacity thereunder. Debt issuance costs and legal fees related to the Credit Facility totaling $0.4 million were recorded as a deferred asset and are being amortized ratably over the term of the arrangement.
The Credit Facility contains various customary affirmative and negative covenants, including prohibiting the Company from incurring indebtedness without the lender’s consent. The Credit Facility also includes a financial covenant, that requires the Company to maintain a minimum fixed charge coverage ratio of 1.10 to 1.00 for the applicable measurement period, if the Company's Total Liquidity (as defined in the Credit Facility) is less than $5.0 million. The Company was in compliance with all applicable covenants at December 31, 2017.
The Credit Facility also includes customary events of default, including events of default relating to non-payment of amounts due under the Credit Facility, material inaccuracy of representations and warranties, violation of covenants, bankruptcy and insolvency, failure to comply with health care laws, violation of certain of the Company’s existing agreements, and the occurrence of a change of control. Under the Credit Facility, if an event of default occurs, the lender will have the right to terminate the commitments and accelerate the maturity of any loans outstanding.
Insurance Premium Finance Agreements
In July 2016, the Company entered into two insurance premium finance agreements (the Finance Agreements) with First Insurance Funding Corporation and AFCO Acceptance Corporation (the Lenders), under which the Lenders agreed to pay premiums, taxes and fees to insurance companies on the Company's behalf for various insurance policies. The Company financed an aggregate of $1.2 million under the Finance Agreements with annual interest rates between 2% and 4%. The Company recorded the total amounts due to the Lenders as short-term debt on the balance sheet. At June 30, 2017, the financed amount plus accrued interest was paid off and no amounts were outstanding under the Finance Agreements, and no additional amounts have been financed under the Finance Agreements since then. There were no amounts outstanding under the Finance Agreements at December 31, 2017, and $0.4 million outstanding at December 31, 2016.
5. BALANCE SHEET DETAILS
Inventories. Inventories consisted of the following:
December 31, 2017 | December 31, 2016 | ||||||
(In thousands) | |||||||
Finished goods | $ | 31,008 | $ | 30,922 | |||
Work in process | 6,909 | 10,554 | |||||
Raw materials | 3,804 | 3,823 | |||||
$ | 41,721 | $ | 45,299 | ||||
F- 16
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
Property, Plant and Equipment. Property, plant and equipment, net and corresponding useful lives were as follows:
December 31, 2017 | December 31, 2016 | Useful Lives | |||||||
(In thousands) | |||||||||
Leasehold improvement | $ | 5,312 | $ | 5,003 | Lease term | ||||
Machinery and production equipment | 7,030 | 6,826 | 3-10 years | ||||||
Spinal instruments and sets | 20,340 | 26,618 | 5 years | ||||||
Information systems and hardware | 7,375 | 6,918 | 3-7 years | ||||||
Furniture and fixtures | 991 | 1,058 | 3-5 years | ||||||
Construction in progress | 8,136 | 7,828 | |||||||
Total | 49,184 | 54,251 | |||||||
Less accumulated depreciation and amortization | (27,121 | ) | (32,388 | ) | |||||
Property, plant and equipment, net | $ | 22,063 | $ | 21,863 | |||||
The balance of construction in progress as of December 31, 2017 and 2016 consists primarily of spinal instruments that are not yet placed into service.
Depreciation and amortization expenses totaled $4.1 million, $4.5 million and $4.5 million for the years ended December 31, 2017, 2016, and 2015, respectively, and included $0.8 million, $1.2 million and $0.3 million expenses that were presented within cost of goods sold for 2017, 2016 and 2015, respectively. The cost of purchased instruments used to replace damaged instruments in existing sets and recorded directly to the instrument replacement expense totaled $1.8 million, $1.4 million and $1.2 million for the years ended December 31, 2017, 2016 and 2015, respectively.
For the years ended December 31, 2016 and 2015, the Company recorded impairment charges totaling $0.9 million and $0.2 million, respectively, against spinal instruments that are no longer expected to be placed into service. No impairment charges against spinal instruments were recorded for the year ended December 31, 2017.
Identifiable Intangible Assets. The components of the Company’s identifiable intangible assets were as follows:
December 31, 2017 | |||||||||||||
Weighted Average Life | Cost | Accumulated Amortization | Net | ||||||||||
(In thousands) | |||||||||||||
Product technology | 12 years | $ | 40,769 | $ | (25,827 | ) | $ | 14,942 | |||||
Customer relationships | 12 years | 56,830 | (36,565 | ) | 20,265 | ||||||||
Trademarks/brand names | — | 300 | (300 | ) | — | ||||||||
$ | 97,899 | $ | (62,692 | ) | $ | 35,207 | |||||||
December 31, 2016 | |||||||||||||
Weighted Average Life | Cost | Accumulated Amortization | Net | ||||||||||
(In thousands) | |||||||||||||
Product technology | 12 years | $ | 40,569 | $ | (22,218 | ) | $ | 18,351 | |||||
Customer relationships | 12 years | 56,830 | (33,396 | ) | 23,434 | ||||||||
Trademarks/brand names | — | 300 | (300 | ) | — | ||||||||
$ | 97,699 | $ | (55,914 | ) | $ | 41,785 | |||||||
Annual amortization expense (including amounts reported in cost of goods sold) is expected to be approximately, $6.5 million in 2018, $5.8 million in 2019, $4.9 million in 2020, $4.9 million in 2021, and $4.8 million in 2022. Amortization expense totaled $6.8 million, $7.2 million and $8.0 million for the years ended December 31, 2017, 2016 and 2015, respectively, and included $3.6 million, $2.9 million, and $2.7 million, respectively, of amortization of product technology intangible assets that was presented within cost of goods sold.
F- 17
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
6. BUSINESS COMBINATIONS
In August 2016, the Company entered into an asset purchase agreement with N.L.T Spine Ltd. (NLT), and NLT Spine, Inc., a wholly owned subsidiary of NLT, pursuant to which the Company agreed to purchase certain of the assets of NLT’s medical device business, including substantially all of NLT’s medical device intellectual property related to the ownership, design, development, manufacture, marketing and commercial exploitation of certain expandable interbody devices. The acquisition was undertaken to increase the Company's product offering in expandable interbody devices.
At the initial closing under the asset purchase agreement, the Company entered into (i) an exclusive license agreement with NLT, pursuant to which the Company received an exclusive, worldwide license to make, use, import, offer for sale, sell and otherwise commercially exploit NLT’s expandable interbody device products , (ii) a transition services agreement with NLT, pursuant to which NLT agreed to provide certain services with respect to the continued development of the acquired intellectual property and (iii) a non-competition and non-solicitation agreement with NLT, pursuant to which NLT and its affiliates agreed not to compete with the Company with respect to the acquired intellectual property, subject to certain exceptions.
The purchase price consisted of an initial cash payment to NLT of $1.0 million, which was paid in September 2016 upon the initial closing, and the issuance in January 2017 of 350,000 shares of the Company’s common stock with a total fair value of $2.5 million at issuance as contingent closing consideration upon the satisfaction of certain conditions, including FDA 510(K) clearance of one of the acquired product technologies. In accordance with the terms of the asset purchase agreement, the number of shares issued was determined based on the volume weighted average closing price (VWAP) of the Company's common stock during the 20 trading day period ending one trading day prior to the issuance date, subject to a minimum and maximum VWAP of $10.00 and $17.00, respectively. The VWAP over such 20-trading day period was $7.58 and therefore $10.00 was used.
The Company is also obligated to pay up to a maximum of $5.0 million in milestone payments, payable at the Company's election in cash or in shares of its common stock, which are contingent on the Company's achievement of four independent events related to the commercialization of the acquired product technologies. Additionally, the Company is required to pay royalty payments, in cash, to NLT equal to declining (over time) percentages of the Company’s future net sales of certain of the acquired product technologies not to exceed $43.0 million in the aggregate. The Company has the option to terminate any future obligation to make royalty payments by making a one-time cash payment to NLT of $18.0 million.
The Company accounted for this transaction as a business combination in accordance with ASC 805 Business Combinations, and as such, the assets acquired have been recorded at their respective fair values. There were no liabilities assumed. The determination of fair value for the identifiable intangible assets acquired requires extensive use of estimates and judgments. Significant estimates include estimating cash flows and determining the appropriate discount rate, which are considered significant unobservable inputs (Level 3) under the fair value concepts defined in ASC 820. Intangible assets acquired were valued at $9.3 million as of the initial closing date and recorded as product technology intangible assets, which are being amortized ratably over a useful life of 10 years from the initial closing. Acquisition costs of $0.5 million incurred were recorded as selling, marketing and administrative expenses.
The following table summarizes the estimated fair value of total consideration to be paid to NLT as of September 26, 2016, the date of the initial closing. The Company estimated the fair value of the contingent consideration, including contingent milestone payments and contingent royalty payments, using a probability weighted approach that considers the possible outcomes based on assumptions related to the timing and probability of the product launch dates, discount rates matched to the timing of payments, and probability of success rates and discount adjustments on the related cash flows. Subsequent to the acquisition date, at each reporting period, the contingent consideration liabilities will be remeasured at current fair value with changes to be recorded in the consolidated statements of operations. The total purchase price was allocated entirely to product technology intangible asset.
(In thousands) | |||
Cash paid for purchase | $ | 1,000 | |
Contingent closing consideration | 2,930 | ||
Contingent milestone payments | 2,310 | ||
Contingent royalty payments | 3,010 | ||
Total purchase price | $ | 9,250 | |
The unaudited pro forma financial information set forth below assumes that the NLT purchased assets had been acquired on January 1, 2015. The unaudited pro forma financial information includes the effect of estimated amortization charges for acquired intangible
F- 18
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
assets of $0.9 million for each of the years ended December 31, 2016 and 2015, the estimated research and development expenses for the purchased assets of $1.1 million for each of the years ended December 31, 2016 and 2015, and excludes the non-recurring acquisition costs of $0.5 million for the year ended December 31, 2016. There was no adjustment to the total revenues. The unaudited pro forma information is presented for informational purposes only and is not indicative of the results of operations that would have been achieved if the acquisition had taken place at the beginning of the periods presented.
The actual amortization charges for acquired intangible assets and research and development expenses for the purchased assets are included in the consolidated statement of operations for the year ended December 31, 2017, and therefore no adjustment was made to such statement.
Year Ended December 31, | ||||||||
2016 | 2015 | |||||||
(In thousands, except per share data) | ||||||||
Operating loss | $ | (45,063 | ) | $ | (54,196 | ) | ||
Net loss | (44,775 | ) | (57,552 | ) | ||||
Net loss per share, basic and diluted | $ | (3.99 | ) | $ | (5.17 | ) | ||
Weighted average shares used to compute basic and diluted net loss per share | 11,222 | 11,139 | ||||||
F- 19
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
7. FAIR VALUE MEASUREMENTS
The fair values of the Company’s assets and liabilities, including contingent consideration liabilities, are measured at fair value on a recurring basis, and are determined under the fair value categories as follows (in thousands):
Total | Quoted Price in Active Market (Level 1) | Significant Other Observable Inputs (Level 2) | Significant Unobservable Inputs (Level 3) | |||||||||||||
December 31, 2017: | ||||||||||||||||
Contingent consideration liabilities- current | $ | 207 | $ | — | $ | — | $ | 207 | ||||||||
Contingent consideration liabilities- non-current | 4,228 | — | — | 4,228 | ||||||||||||
Total contingent consideration | $ | 4,435 | $ | — | $ | — | $ | 4,435 | ||||||||
Total | Quoted Price in Active Market (Level 1) | Significant Other Observable Inputs (Level 2) | Significant Unobservable Inputs (Level 3) | |||||||||||||
December 31, 2016: | ||||||||||||||||
Contingent consideration liabilities- current | $ | 2,855 | $ | — | $ | — | $ | 2,855 | ||||||||
Contingent consideration liabilities- non-current | 5,125 | — | — | 5,125 | ||||||||||||
Total contingent consideration | $ | 7,980 | $ | — | $ | — | $ | 7,980 | ||||||||
Contingent consideration liabilities are classified within Level 3 of the fair value hierarchy because they use significant unobservable inputs. For those liabilities, fair value is determined using a probability-weighted discounted cash flow model and significant inputs which are not observable in the market. The significant inputs include assumptions related to the timing and probability of the product launch dates, discount rates matched to the timing of payments, and probability of success rates.
The following table sets forth the changes in the estimated fair value of the Company’s liabilities measured on a recurring basis using significant unobservable inputs (Level 3) for the years ended December 31, 2017 and 2016. The gain from change in fair value of contingent closing consideration is the difference between the fair value of shares expected to be issued to NLT based on assumptions as of December 31, 2016, including the forecasted issuance date and stock price and the fair value of the shares actually issued to NLT on January 31, 2017. The gain from change in fair value of contingent milestone and royalty payments resulted from updated estimated timing of payments, probability of success rates, the passage of time, updated discount rates matched to the estimated timing of payments, actual net sales of certain products for the year ended December 31, 2017, and lower estimated net sales for future royalty payment periods.
A change in estimated timing of payments, probability of success rates, or estimated net sales for future royalty payment periods would be expected to have a material impact on the fair value of contingent milestone and royalty payments.
Year Ended December 31, | ||||||||
2017 | 2016 | |||||||
(in thousands) | ||||||||
Beginning Balance as of January 1 | $ | 7,980 | $ | — | ||||
Contingent consideration liabilities assumed (settled) | (2,570 | ) | 8,250 | |||||
Gain from change in fair value of contingent closing consideration recorded in other income | (112 | ) | (270 | ) | ||||
Gain from change in fair value of contingent milestone and royalty payments recorded in selling, general and administrative expenses | (863 | ) | — | |||||
Ending Balance as of December 31 | $ | 4,435 | $ | 7,980 | ||||
8. EQUITY AND STOCK-BASED COMPENSATION
Common Stock
On January 31, 2017, the Company issued 350,000 shares of common stock to NLT as the settlement of contingent closing consideration pursuant to the terms of the asset purchase agreement entered into with NLT in August 2016. The total fair value of such shares was $2.5 million at issuance. See Note 6, "Business Combinations" above.
F- 20
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
In August 2016, the Company entered into an equity distribution agreement (Distribution Agreement) with Piper Jaffray & Co. (Piper Jaffray), pursuant to which the Company may offer and sell shares of its common stock in “at the market” (ATM) offerings (as defined in Rule 415 of the Securities Act of 1933, as amended) having an aggregate offering price up to $25.0 million in gross proceeds from time to time through Piper Jaffray acting as sales agent. The shares offered and sold under the Distribution Agreement are covered by a registration statement on Form S-3 that was declared effective on August 24, 2016. Under the Distribution Agreement, the Company sold 1,500,000 shares of common stock at an average price per share of $10.78 and received net proceeds of approximately $15.6 million (net of $0.6 million of offering costs) during the year ended December 31, 2017. The Company intends to use the net proceeds for general corporate purposes, including paying down outstanding borrowings under the Credit Facility, sales and marketing expenditures aimed at growing its business, and research and development expenditures focused on product development.
Subsequent to December 31, 2017, the Company sold an additional 882,332 shares of common stock at an average price per share of $10.00 and received net proceeds of approximately $8.6 million (net of $0.2 million offering costs), which consumed the remaining capacity under the Distribution Agreement.
Equity Award Plans
Stock-based compensation expense, all related to employees and non-employee directors, was recognized as follows:
December 31 | ||||||||||||
2017 | 2016 | 2015 | ||||||||||
(In Thousands) | ||||||||||||
Selling, general and administrative | $ | 5,136 | $ | 5,378 | $ | 3,993 | ||||||
Research and development | 790 | 783 | 242 | |||||||||
Cost of goods sold | 141 | 277 | 168 | |||||||||
Total stock-based compensation expense | 6,067 | 6,438 | 4,403 | |||||||||
Total estimated tax benefit related to stock-based compensation expense | — | — | 37 | |||||||||
Net effect on net income | $ | 6,067 | $ | 6,438 | $ | 4,366 | ||||||
As of June 30, 2015, Integra had stock options, restricted stock awards, performance stock awards, contract stock awards and restricted stock units outstanding under three plans, the 2000 Equity Incentive Plan, the 2001 Equity Incentive Plan, and the 2003 Equity Incentive Plan. In connection with the spin-off, Integra equity awards granted to individuals who became employees of SeaSpine were converted to equity awards denominated in SeaSpine common stock. In general, each post-conversion award is subject to the same terms and conditions as were applicable to the pre-conversion award.
In May 2015, the Company adopted the 2015 Incentive Award Plan, which was subsequently amended and restated with approval of the Company's stockholders (as amended and restated, the 2015 Plan). Under the 2015 Plan, the Company can grant its employees, non-employee directors and consultants incentive stock options and non-qualified stock options, restricted stock, performance stock, dividend equivalent rights, stock appreciation rights, stock payment awards and other incentive awards. The Company may issue up to 3,786,643 shares of its common stock in respect of awards granted under the 2015 Plan. As of December 31, 2017, there were 346,604 shares available to grant under the 2015 Plan.
In 2016, the Company established the 2016 Employment Inducement Incentive Award Plan (the 2016 Plan). The plan is a broad-based incentive plan which allows for the issuance of stock-based awards, including non-qualified stock options, restricted stock awards, performance awards, restricted stock unit awards and stock appreciation rights, to any prospective officer or other employee who has not previously been an employee or director of SeaSpine or an affiliate or who is commencing employment with SeaSpine or an affiliate following a bona-fide period of non-employment by SeaSpine or an affiliate. An aggregate of 1,000,000 shares are reserved for issuance under the 2016 Plan. The Company has not awarded any shares under the 2016 Plan as of December 31, 2017.
Restricted Stock Awards and Restricted Stock Units
The Company expenses the fair value of restricted stock awards and of restricted stock units on an accelerated basis over the vesting period or requisite service period, whichever is shorter. Stock-based compensation expense related to restricted stock awards and to restricted stock units includes an estimate for forfeitures. The expected forfeiture rate of all equity-based compensation is based on historical experience of pre-vesting forfeitures on awards by each homogenous group of shareowners. For awards granted to non-executive employees, the forfeiture rate is estimated to be 15%, 12% and 10% annually for the years ended
F- 21
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
December 31, 2017, 2016 and 2015, respectively. There is no forfeiture rate applied to awards granted to non-employee directors or executive employees because their pre-vesting forfeitures are anticipated to be highly unlikely. As individual awards become fully vested, stock-based compensation expense is adjusted to recognize actual forfeitures.
The following table summarizes restricted stock awards and restricted stock units granted to SeaSpine employees and non-employee directors during the year ended December 31, 2017:
Restricted Stock Awards and Units | |||
Shares (In thousands) | Weighted Average Grant Date Fair Value Per Share | ||
Unvested, January 1, 2017 | 65 | $9.87 | |
Granted | 927 | 7.89 | |
Cancellations | (14) | 7.97 | |
Released/Vested | (253) | 8.57 | |
Unvested, December 31, 2017 | 725 | $7.82 | |
The weighted average grant date fair value of restricted stock awards and units granted during the years ended December 31, 2017, 2016 and 2015 was $7.89, $9.89 and $12.81, respectively. The total fair value of shares vested in 2017, 2016 and 2015 was $2.2 million, $0.7 million, and $1.1 million, respectively.
The Company recognized $3.8 million, $0.9 million and $0.3 million in expense related to restricted stock awards and restricted stock units for the years ended December 31, 2017, 2016 and 2015, respectively. As of December 31, 2017, there was approximately $2.3 million of total unrecognized compensation expense related to the unvested portions of these awards. This cost is expected to be recognized over a weighted-average period of approximately 1.4 years.
Stock Options
Stock option grants to employees generally have a requisite service period of four years, and stock option grants to non-employee directors generally have a requisite service period of one year. Both are subject to graded vesting. The Company records stock-based compensation expense associated with stock options on an accelerated basis over the various vesting periods within each grant and based on their fair value at the date of grant using the Black-Scholes-Merton option pricing model. The following weighted-average assumptions were used in the calculation of fair value for options grants for the years ended December 31, 2017, 2016 and 2015:
December 31 | ||||||||
2017 | 2016 | 2015 | ||||||
Expected dividend yield | 0 | % | 0 | % | 0 | % | ||
Risk-free interest rate | 2.0 | % | 1.3 | % | 1.6 | % | ||
Expected volatility | 35.7 | % | 38.2 | % | 38.2 | % | ||
Expected term (in years) | 5.1 | 4.9 | 5.1 | |||||
The Company considered that it has never paid, and does not currently intend to pay, cash dividends. The risk-free interest rates are derived from the U.S. Treasury yield curve in effect on the date of grant for instruments with a remaining term similar to the expected term of the options. Due to the Company’s limited historical data, the expected volatility is calculated based upon the historical volatility of comparable companies in the medical device industry whose share prices are publicly available for a sufficient period of time. The expected term of "plain vanilla" options is calculated using the simplified method as prescribed by accounting guidance for stock-based compensation. A "plain vanilla" option is an option with the following characteristics: (1) the option is granted at-the-money; (2) exercisability is conditional only on satisfaction of a service condition through the vesting date; (3) employees who terminate their service prior to vesting forfeit the option; (4) employees who terminate their service after vesting are granted limited time to exercise their options; and (5) the option is nontransferable and non-hedgeable. The expected term of any other option is based on disclosures from similar companies with similar grants. In addition, the Company applies an expected forfeiture rate when amortizing stock-based compensation expense. The expected forfeiture rate of options is based on historical experience of pre-vesting forfeitures on awards by each homogenous group of shareowners. The forfeiture rate of options granted to non-executive employees is estimated to be 15%, 12% and 10% annually for the years ended December 31, 2017, 2016 and
F- 22
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
2015, respectively. There is no forfeiture rate applied for non-employee directors and executive employees as their pre-vesting forfeitures are anticipated to be highly unlikely. As individual grant awards become fully vested, stock-based compensation expense is adjusted to recognize actual forfeitures.
A summary of the options granted during the year ended December 31, 2017 and the total number of options outstanding as of that date and changes since January 1, 2017 are set forth below:
Number of Shares Outstanding (In thousands) | Weighted Average Exercise Price | Weighted Average Remaining Contractual Life (In years) | Aggregate Intrinsic Value (In thousands) | ||||||||||
Outstanding, January 1, 2017 | 2,732 | $ | 14.43 | 6.71 | $ | 37 | |||||||
Granted | 22 | $ | 7.56 | — | — | ||||||||
Exercised | (5 | ) | $ | 6.92 | — | — | |||||||
Forfeited | (187 | ) | $ | 12.68 | — | — | |||||||
Outstanding, December 31, 2017 | 2,560 | $ | 14.51 | 5.96 | $ | 238 | |||||||
Vested or expected to vest, December 31, 2017 | 2,525 | $ | 14.54 | 5.96 | $ | 217 | |||||||
Exercisable, December 31, 2017 | 1,744 | $ | 14.55 | 5.98 | $ | 136 | |||||||
The weighted average grant date fair value of options granted during the years ended December 31, 2017, 2016 and 2015 was $2.63, $3.00 and $5.57, respectively. The total fair value of shares vested in 2017, 2016 and 2015 was $2.2 million, $4.8 million, and $0.7 million, respectively.
The Company recognized $1.7 million, $5.0 million and $4.4 million in expense related to stock options for the years ended December 31, 2017, 2016 and 2015, respectively. As of December 31, 2017, there was approximately $0.9 million of total unrecognized compensation expense related to unvested stock options. This cost is expected to be recognized over a weighted-average period of approximately 1.0 years.
Employee Stock Purchase Plan
In May 2015, the Company adopted the SeaSpine Holdings Corporation 2015 Employee Stock Purchase Plan, which was amended in December 2015 (as amended, the ESPP). Under the ESPP, eligible employees may purchase shares of the Company’s common stock through payroll deductions of up to 15% of eligible compensation during an offering period. Generally, each offering will be for a period of twenty-four months as determined by the Company's board of directors. There are four six-month purchase periods in each offering period for contributions to be made and to be converted into shares at the end of the purchase period. In no event may an employee purchase more than 2,500 shares per purchase period based on the closing price on the first trading date of an offering period or more than $25,000 worth of stock during any calendar year. The purchase price for shares to be purchased under the ESPP is 85% of the lesser of the market price of the Company's common stock on the first trading date of an offering period or on any purchase date during an offering period (June 30 or December 31).
The ESPP authorizes the issuance of up to 400,000 shares of common stock pursuant to purchase rights granted to employees. The ESPP is intended to qualify as an “employee stock purchase plan” within the meaning of Section 423 of the Internal Revenue Code of 1986, as amended (the IRC). The first offering period under the ESPP commenced on January 1, 2016 and will end on December 31, 2017. However, the ESPP contains a restart feature, such that if the market price of the stock at the end of any six-month purchase period is lower than the market price at the original grant date of an offering period, that offering period will terminate after that purchase date, and a new two-year offering period will commence on the January 1 or July 1 immediately following the date the original offering period terminated. This restart feature was first triggered on the purchase date that occurred on June 30, 2016, such that the offering period that commenced on January 1, 2016 was terminated, and a new two-year offering period commenced on July 1, 2016. This restart feature was triggered again on the purchase date that occurred on December 31, 2016, such that the offering period that commenced on July 1, 2016 was terminated, and a new two-year offering period commenced on January 1, 2017 and will end on December 31, 2018. The Company applied share-based payment modification accounting to the awards that were initially valued at the grant date to determine the amount of any incremental fair value associated with the modified awards. The impact to stock-based compensation expense for modifications during the year ended December 31, 2017, was immaterial.
F- 23
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
During the years ended December 31, 2017 and 2016, there were 150,020 and 89,857 shares of common stock, respectively, purchased under the ESPP. The Company recognized $0.6 million and $0.5 million in expense related to the ESPP for the years ended December 31, 2017 and 2016, respectively.
The Company estimates the fair value of shares issued to employees under the ESPP using the Black-Scholes-Merton option-pricing model. The following weighted average assumptions were used in the calculation of fair value of shares under the ESPP at the grant date for the years ended December 31, 2017 and 2016, respectively:
December 31 | ||||||
2017 | 2016 | |||||
Expected dividend yield | 0 | % | 0 | % | ||
Risk-free interest rate | 1.0 | % | 0.6 | % | ||
Expected volatility | 28.1 | % | 30.5 | % | ||
Expected term (in years) | 1.2 | 1.2 | ||||
9. LEASE
The Company leases administrative, manufacturing, research, and distribution facilities and various manufacturing, office and transportation equipment through operating lease agreements. During the year ended December 31, 2017, the Company entered into two lease agreements: one for an office located in Wayne, Pennsylvania, where the Company designs spinal implants and which facilitates the Company's interactions with customers in the Eastern United States, and another for an office located in Lyon, France, which serves as the Company's international sales and marketing office. The terms of these two lease agreements are through June 2022 and February 2026, respectively, and both have an average annual cost of less than $0.1 million.
Future minimum lease payments under the Company's operating leases at December 31, 2017 are as follows:
Payments Due by Calendar Year | |||
(In thousands) | |||
2018 | $ | 2,083 | |
2019 | 2,130 | ||
2020 | 2,187 | ||
2021 | 2,221 | ||
2022 | 2,242 | ||
Thereafter | 6,236 | ||
Total minimum lease payments | $ | 17,099 | |
Total lease expense for the years ended December 31, 2017, 2016, and 2015 was $2.2 million, $3.1 million and $2.5 million,
respectively.
10. INCOME TAXES
The Company is subject to income taxes in the U.S., Switzerland and France. Income taxes are accounted for under the asset and liability method. Deferred income tax assets and liabilities are calculated based on the difference between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases using the enacted income tax rates expected to be in effect during the years in which the temporary differences are expected to reverse. Valuation allowances are recorded to reduce deferred tax assets when it is more likely than not that a tax benefit will not be realized. Significant judgment is required in determining whether a valuation allowance should be recorded against deferred tax assets. In assessing the need for a valuation allowance, management considers all available evidence for each jurisdiction including past operating results, estimates of future taxable income and the feasibility of ongoing tax planning strategies. In the event that the Company changes its determination as to the amount of deferred tax assets that can be realized, the Company will adjust its valuation allowance with a corresponding impact to income tax expense in the period in which such determination is made.
F- 24
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
Prior to the Spin-off
Prior to the spin-off, the income tax provision in the consolidated statements of operations has been calculated using the separate return method, as if the Company filed a separate tax return and operated as a stand-alone business. Therefore, cash tax payments and items of current and deferred taxes may not be reflective of actual tax balances included in Integra’s historical consolidated income tax return.
After the Spin-off
Subsequent to the spin-off on July 1, 2015, the deferred tax balances were adjusted to reflect only those tax attributes that carryforward with the Company. The adjustment to deferred taxes was recorded through stockholders' equity. The Company also made an election to change the tax classification for its foreign entity. This election resulted in both the foreign entity and its U.S. subsidiary to be included in the consolidated federal tax group on September 1, 2015.
Income Tax Provision (Benefit)
Income (loss) before income taxes consisted of the following:
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
(In thousands) | |||||||||||
United States operations | $ | (34,886 | ) | $ | (44,072 | ) | $ | (51,305 | ) | ||
Foreign operations | 2,653 | 308 | (1,748 | ) | |||||||
$ | (32,233 | ) | $ | (43,764 | ) | $ | (53,053 | ) | |||
A reconciliation of the U.S. federal statutory rate to the Company’s effective tax rate is as follows:
Year Ended December 31, | |||||
2017 | 2016 | 2015 | |||
Federal statutory rate | 35.0% | 35.0% | 35.0% | ||
Increase (decrease) in income taxes resulting from: | |||||
State income taxes, net of federal tax benefit | 4.1% | 2.1% | 0.1% | ||
Foreign operations | (0.2)% | (3.2)% | (0.7)% | ||
Changes in valuation allowances | 43.2% | (33.1)% | (16.7)% | ||
Pre-Spin losses with no tax benefit | —% | —% | (22.7)% | ||
Uncertain tax positions | 0.3% | 0.2% | —% | ||
Research and development credit | 0.2% | 0.2% | —% | ||
Return to provision | —% | 0.9% | —% | ||
Domestic manufacturing deduction | —% | —% | 0.5% | ||
Other | 0.8% | (0.8)% | (0.2)% | ||
Change in rate resulting from the 2017 Tax Act | (83.0)% | —% | —% | ||
Effective tax rate | 0.4% | 1.3% | (4.7)% | ||
F- 25
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
The provision/(benefit) for income taxes consisted of the following:
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
(In thousands) | |||||||||||
Current: | |||||||||||
Federal | $ | (102 | ) | $ | (532 | ) | $ | 2,655 | |||
State | 20 | (51 | ) | 106 | |||||||
Foreign | 42 | 41 | — | ||||||||
Total current | $ | (40 | ) | $ | (542 | ) | $ | 2,761 | |||
Deferred: | |||||||||||
Federal | — | — | — | ||||||||
State | — | — | — | ||||||||
Foreign | (78 | ) | (10 | ) | (282 | ) | |||||
Total deferred | $ | (78 | ) | $ | (10 | ) | $ | (282 | ) | ||
Provision (benefit) for income taxes | $ | (118 | ) | $ | (552 | ) | $ | 2,479 | |||
The income tax effects of significant temporary differences that give rise to deferred tax assets and liabilities, shown before jurisdictional netting, are presented below:
Year Ended December 31, | |||||||
2017 | 2016 | ||||||
(In thousands) | |||||||
Deferred tax assets: | |||||||
Doubtful accounts | $ | 116 | $ | 184 | |||
Inventory related items | 8,976 | 13,163 | |||||
Tax credits | 158 | 83 | |||||
Accrued vacation | 348 | 498 | |||||
Accrued bonus | 815 | 812 | |||||
Stock compensation | 3,129 | 3,329 | |||||
Net operating loss carryforwards | 22,175 | 19,955 | |||||
Intangible and fixed assets | 12,054 | 22,910 | |||||
Other | 686 | 923 | |||||
Total deferred tax assets | 48,457 | 61,857 | |||||
Less valuation allowance | (47,433 | ) | (61,118 | ) | |||
Deferred tax assets after valuation allowance | $ | 1,024 | $ | 739 | |||
Deferred tax liabilities: | |||||||
Other | 469 | 246 | |||||
Total deferred tax liabilities | $ | 469 | $ | 246 | |||
Net deferred tax assets | $ | 555 | $ | 493 | |||
The Tax Cuts and Jobs Act (the 2017 Tax Act) was enacted on December 22, 2017. The 2017 Tax Act reduces the U.S federal corporate tax rate from 35% to 21%. Accordingly, the Company has modified the value of the deferred tax assets and liabilities including the net operating loss carryover at December 31, 2017. Prior to enactment of the new tax reform, the Company had total net deferred tax assets of $74.1 million before valuation allowance at December 31, 2017. Taking the new tax reform into consideration, the Company's total net deferred tax assets were $48.0 million before valuation allowance at December 31, 2017.
The Company is not subject to the new transition tax on accumulated foreign earnings enacted by the 2017 Tax Act since the foreign operations have been included in US tax filings pursuant to an election to disregard these entities for federal income tax purposes.
F- 26
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
At December 31, 2017, the Company had net operating loss carryforwards of $88.3 million for federal and state income tax purposes. The Company also had foreign net operating loss carryforwards of $2.7 million. These tax loss carryforwards begin to expire in 2018 and 2027 for foreign and federal and state income tax, respectively, and will expire through 2037. The tax benefit recorded for net operating losses, net of valuation allowance, was less than $0.1 million which relates only to foreign net operating losses.
At December 31, 2016, the Company had net operating loss carryforwards of $51.4 million for federal and state income tax purposes. The Company also had foreign net operating loss carryforwards of $3.0 million. These tax loss carryforwards began to expire in 2016 and 2027 for foreign and federal and state income tax, respectively, and will expire through 2035. The tax benefit recorded for net operating losses, net of valuation allowance, was less than $0.1 million which relates only to foreign net operating losses.
The valuation allowance relates to deferred tax assets for certain items that will be deductible for income tax purposes under very limited circumstances and for which the Company believes it is not more likely than not that it will realize the associated tax benefit. However, in the event that the Company determines that it would be able to realize more or less than the recorded amount of net deferred tax assets, an adjustment to the deferred tax asset valuation allowance would be recorded in the period such a determination is made. In assessing the realizability of deferred tax assets, management considers whether it is more-likely-than-not that some portion of all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible. Management considers the scheduled reversal of deferred tax liabilities (including the impact of available carryback and carryforward periods), projected future taxable income, and tax planning strategies in making this assessment. Based upon the levels of historical taxable income, projections of future taxable income and the reversal of deferred tax liabilities over the periods in which the deferred tax assets are deductible, management believes it is more-likely-than-not that the Company will realize the benefits of these deductible differences, net of the existing valuation allowance. The amount of deferred tax asset considered realizable, however, could change in the near term if estimates which require significant judgment of future taxable income during the carryforward period are increased or decreased.
A reconciliation of the Company’s uncertain tax benefits is as follows:
Year Ended December 31, | |||||||||||
2017 | 2016 | 2015 | |||||||||
(In thousands) | |||||||||||
Balance, beginning of year | $ | 305 | $ | 298 | $ | 113 | |||||
Gross increases: | |||||||||||
Prior years’ tax positions | 5 | 7 | 90 | ||||||||
Additions to tax positions in prior years due to spin-off | — | — | 185 | ||||||||
Current year tax positions | 74 | 107 | — | ||||||||
Gross decreases: | |||||||||||
Settlements | — | — | — | ||||||||
Statute of limitations lapses | (107 | ) | (107 | ) | (90 | ) | |||||
Balance, end of year | $ | 277 | $ | 305 | $ | 298 | |||||
Approximately $0.3 million of the balance at December 31, 2017 relates to uncertain tax positions that, if recognized, would affect the annual effective tax rate. There is $0.1 million related to tax positions for which it is reasonably possible that the total amounts could be reduced during the twelve months following December 31, 2017, as a result of expiring statutes of limitations.
The Company recognizes interest and penalties relating to uncertain tax positions in income tax expense. The amounts recorded in 2017, 2016 and 2015 were not significant.
The Company files income tax returns as prescribed by tax laws of the jurisdictions in which it operates. In the normal course of business, the Company is subject to examination by federal, state, local and foreign jurisdictions where applicable based on the statute of limitations that apply in each jurisdiction. The Company has no open tax audits with any taxing authority as of December 31, 2017.
F- 27
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
11. COMMITMENTS AND CONTINGENCIES
In consideration for certain technology, manufacturing, distribution, and selling rights and licenses granted to the Company, the Company has agreed to pay royalties on sales of certain products sold by the Company. The royalty payments that the Company made under these agreements are included in the consolidated statements of operations as a component of cost of goods sold.
The Company is subject to various legal proceedings in the ordinary course of its business with respect to its products, its current or former employees, and its commercial relationships, some of which have been settled by the Company. In the opinion of management, such proceedings are either adequately covered by insurance or otherwise indemnified, or are not expected, individually or in the aggregate, to result in a material adverse effect on the Company's financial condition. However, it is possible that the Company's results of operations, financial position and cash flows in a particular period could be materially affected by these contingencies.
The Company accrues for loss contingencies when it is deemed probable that a loss has been incurred and that loss is estimable. The amounts accrued are based on the full amount of the estimated loss before considering insurance proceeds, and do not include an estimate for legal fees expected to be incurred in connection with the loss contingency. While uncertainty exists, the Company does not believe there are any pending legal proceedings that would have a material impact on the Company’s financial position, cash flows or results of operations.
12. SEGMENT AND GEOGRAPHIC INFORMATION
Management assessed its segment reporting based on how it internally manages and reports the results of its business to its chief operating decision maker. Management reviews financial results, manages the business and allocates resources on an aggregate basis. Therefore, financial results are reported in a single operating segment: the development, manufacture and marketing of orthobiologics and of spinal implants. The Company reports revenue in two product categories: orthobiologics and spinal implants. Orthobiologics products consist of a broad range of advanced and traditional bone graft substitutes that are designed to improve bone fusion rates following surgery. The spinal implants portfolio consists of an extensive line of products for minimally invasive surgery, complex spine, deformity and degenerative procedures.
Revenue, net consisted of the following:
Year Ended December 31, | ||||||||||||
2017 | 2016 | 2015 | ||||||||||
(In thousands) | ||||||||||||
Orthobiologics | $ | 69,128 | $ | 66,240 | $ | 67,258 | ||||||
Spinal implants | 62,686 | 62,620 | 65,920 | |||||||||
Total Revenue, net | $ | 131,814 | $ | 128,860 | $ | 133,178 | ||||||
The Company attributes revenues to geographic areas based on the location of the customer. Total revenue by major geographic area consisted of the following:
Year Ended December 31, | ||||||||||||
2017 | 2016 | 2015 | ||||||||||
(In thousands) | ||||||||||||
United States | $ | 118,405 | $ | 116,800 | $ | 120,259 | ||||||
International | 13,409 | 12,060 | 12,919 | |||||||||
Total Revenue, net | $ | 131,814 | $ | 128,860 | $ | 133,178 | ||||||
13. EMPLOYEE BENEFIT PLAN
The Company has a defined contribution savings plan under section 401(k) of the IRC. The plan covers substantially all employees. The Company matches employee contributions made to the plan according to a specified formula. The Company’s matching contributions totaled approximately $0.6 million, $0.6 million and $0.5 million for the years ended 2017, 2016 and 2015, respectively.
F- 28
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
14. SELECTED QUARTERLY INFORMATION - UNAUDITED
First Quarter | Second Quarter | Third Quarter | Fourth Quarter | ||||||||||||
(In thousands, except per share data) | |||||||||||||||
Total revenue, net: | |||||||||||||||
2017 | $ | 31,894 | $ | 34,196 | $ | 31,742 | $ | 33,982 | |||||||
2016 | 31,399 | 33,201 | 31,741 | 32,519 | |||||||||||
Gross profit: | |||||||||||||||
2017 | $ | 18,722 | $ | 20,202 | $ | 19,566 | $ | 21,498 | |||||||
2016 | 17,116 | 19,271 | 17,860 | 19,069 | |||||||||||
Net loss: | |||||||||||||||
2017 | $ | (9,103 | ) | $ | (8,043 | ) | $ | (7,462 | ) | $ | (7,507 | ) | |||
2016 | (12,007 | ) | (11,983 | ) | (9,454 | ) | (9,768 | ) | |||||||
Basic/diluted net loss per common share(1): | |||||||||||||||
2017 | $ | (0.79 | ) | $ | (0.68 | ) | $ | (0.58 | ) | $ | (0.56 | ) | |||
2016 | (1.08 | ) | (1.07 | ) | (0.84 | ) | (0.87 | ) | |||||||
(1) Per common share amounts for the quarters and full years have been calculated separately. Accordingly, quarterly amounts
do not necessarily add to the annual amount because of differences in the weighted average common shares outstanding during each period principally due to the effect of the Company’s issuing or canceled shares of its common stock during the year.
F- 29
SEASPINE HOLDINGS CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (continued)
15. SUBSEQUENT EVENT
In February 2018, the Company's board of directors approved a second amendment to the 2015 Plan, pursuant to which the share reserve was increased by 350,000 shares over the current share reserve under the 2015 Plan. Such amendment is subject to the Company obtaining the requisite stockholder approval.
F- 30
SCHEDULE II — VALUATION AND QUALIFYING ACCOUNTS
Balance at Beginning of Period | Charged to Costs and Expenses | Charged to Other Accounts | Additions/Deductions | Balance at End of Period | |||||||||||||||
Description | |||||||||||||||||||
(In thousands) | |||||||||||||||||||
Year ended December 31, 2017: | |||||||||||||||||||
Allowance for doubtful accounts and sales returns and other credits | $ | 483 | $ | 47 | $ | — | $ | (64 | ) | $ | 466 | ||||||||
Deferred tax asset valuation allowance | 61,118 | (13,685 | ) | — | — | 47,433 | |||||||||||||
Year ended December 31, 2016: | |||||||||||||||||||
Allowance for doubtful accounts and sales returns and other credits | $ | 764 | $ | (207 | ) | $ | — | $ | (74 | ) | $ | 483 | |||||||
Deferred tax asset valuation allowance | 46,638 | 14,480 | — | — | 61,118 | ||||||||||||||
Year ended December 31, 2015: | |||||||||||||||||||
Allowance for doubtful accounts and sales returns and other credits | $ | 558 | $ | 55 | $ | — | $ | 151 | $ | 764 | |||||||||
Deferred tax asset valuation allowance | 83,457 | (36,819 | ) | — | — | 46,638 | |||||||||||||
F- 31