Sight Sciences, Inc. - Annual Report: 2022 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2022

OR

Commission File Number 001-40587

SIGHT SCIENCES, INC.

(Exact name of Registrant as specified in its Charter)

Registrant’s telephone number, including area code: (877) 266-1144

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES ☐ No ☒

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ NO ☐

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). Yes ☒ NO ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES ☐ No ☒

As of June 30, 2022, the last business day of the Registrant's most recently completed second fiscal quarter, the aggregate market value of the Registrant's common stock held by non-affiliates was approximately $290 million based on the closing price for the Registrant's common stock of $8.99 on that date. Share of common stock held by each executive, director, and their affiliated stockholders have been excluded from this calculation as such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

The number of shares of Registrant’s Common Stock outstanding as of March 9, 2023 was 48,419,542.

DOCUMENTS INCORPORATED BY REFERENCE

Table of Contents

i

Forward-Looking Statements

Unless the context otherwise requires, references in this Annual Report on Form 10-K to the “Company,” “Sight Sciences,” “we,” “us” and “our” refer to Sight Sciences, Inc.

This Annual Report on Form 10-K for the fiscal year ended December 31, 2022 (this "Annual Report on Form 10-K") contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. We intend such forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements other than statements of historical facts contained in this Annual Report on Form 10-K, including statements regarding our future results of operations or financial condition, business strategy and plans, and objectives of management for future operations, are forward-looking statements. In some cases, you can identify forward-looking statements because they contain words such as “anticipate,” “believe,” “contemplate,” “continue,” “could,” “estimate,” “expect,” “hope,” “intend,” “may,” “might,” “objective,” “ongoing,” “plan,” “potential,” “predict,” “project,” “should,” “target,” “will,” or “would” or the negative of these words or other similar terms or expressions. These forward-looking statements include, but are not limited to, statements concerning the following:

Actual events or results may differ from those expressed in forward-looking statements. As such, you should not rely on forward-looking statements as predictions of future events. We have based the forward-looking statements contained in this Annual Report on Form 10-K primarily on our current expectations and projections about future events and trends that we believe may affect our business, financial condition, operating results, prospects, strategy, and financial needs. The outcome of the events described in these forward-looking statements is subject to risks, uncertainties, assumptions, and other factors described in the section titled “Risk Factors” and elsewhere in this Annual Report on Form 10-K. Moreover, we operate in a highly competitive and rapidly changing environment. New risks and uncertainties emerge from time to time, and it is not possible for us to predict all risks and uncertainties that could have an impact on the forward-looking statements contained in this Annual Report on Form 10-K. The results, events and circumstances reflected in the forward-looking statements may not be achieved or occur, and actual results, events or circumstances could differ materially from those described in the forward-looking statements.

ii

The forward-looking statements in this Annual Report on Form 10-K are based on information available to us as of the date of this Annual Report on Form 10-K. While we believe that such information provides a reasonable basis for these statements, such information may be limited or incomplete. Our statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all relevant information. These statements are inherently uncertain, and investors are cautioned not to unduly rely on these statements.

You should read this Annual Report on Form 10-K and the documents that we reference in this Annual Report on Form 10-K and have filed as exhibits to this Annual Report on Form 10-K with the understanding that our actual future results, performance and achievements may be materially different from what we expect. We qualify all of our forward-looking statements by these cautionary statements. The forward-looking statements made in this Annual Report on Form 10-K relate only to events as of the date on which the statements are made. We undertake no obligation to update any forward-looking statements made in this Annual Report on Form 10-K to reflect events or circumstances after the date of this Annual Report on Form 10-K or to reflect new information, actual results, revised expectations, or the occurrence of unanticipated events, except as required by law. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements, and you should not place undue reliance on our forward-looking statements.

Summary of Risk Factors

Our business is subject to numerous risks and uncertainties, including those described in Part I, Item 1A. “Risk Factors” in this Annual Report on Form 10-K. You should carefully consider these risks and uncertainties when investing in our common stock. The principal risks and uncertainties affecting our business include the following:

iii

iv

PART I

Item 1. Business

Overview

Our mission is to transform ophthalmology and optometry through the development and commercialization of proprietary devices that target the underlying causes of the world’s most prevalent eye diseases. We are passionate about improving patients’ lives. Our business philosophy is grounded in the following principles: comprehensively understanding disease physiology; developing products that are intended to restore natural physiological functionality to diseased eyes; developing and marketing products that achieve superior effectiveness versus current treatment paradigms while minimizing complications or side effects; providing intuitive, patient friendly solutions to ophthalmologists and optometrists (together, "eyecare professionals" or "ECPs"); and delivering compelling economic value to all stakeholders, including patients, providers and third-party payors such as Medicare and commercial insurers. Our objective is to develop and market products for use in new treatment paradigms and to create an interventional mindset in eyecare whereby our products may be used in procedures which supplant conventional outdated approaches. We believe current eyecare treatment models rely heavily on prescription medications, symptom relief, or either flawed or highly invasive, later-stage procedural interventions, and often fail to adequately address the true underlying cause of disease.

We have focused our initial product development efforts on the treatment of two of the world’s most prevalent and underserved eye diseases, glaucoma and dry eye disease ("DED"). We estimate the annual addressable U.S. market opportunities for the products in our surgical glaucoma ("Surgical Glaucoma") and dry eye ("Dry Eye") segments are approximately $6 billion and approximately $10 billion, respectively, while 2022 U.S. manufacturer revenues in the surgical glaucoma and DED markets were approximately $466 million and $2.1 billion, respectively, demonstrating that currently available solutions have not addressed a large part of the market need.

Glaucoma, a group of chronic, often asymptomatic, diseases that damage the optic nerve, is the world’s leading cause of irreversible blindness. Glaucoma does not have a cure and is a progressive disease; if left untreated or insufficiently treated, glaucoma can lead to irreversible disability and blindness. An estimated 149 million people worldwide suffer from glaucoma. Primary open-angle glaucoma ("POAG"), is the most prevalent form of glaucoma and affects over 60 million people worldwide, including approximately 4.3 million people in the United States, of whom an estimated 3.4 million have been diagnosed. One of the greatest risk factors for POAG, and the only risk factor that can be controlled, is elevated intraocular pressure ("IOP"). Elevated IOP is often caused by malfunctioning drainage pathways in the eye that provide abnormal resistance to the outflow of aqueous humor, a clear, watery fluid which bathes and nourishes the lens and maintains pressure within the eye.

We currently have two commercial products in our Surgical Glaucoma segment. OMNI is a handheld, single use, therapeutic device that allows ophthalmic surgeons to reduce IOP in adult glaucoma patients. SION is a bladeless, manually operated device used in ophthalmic surgical procedures to excise trabecular meshwork, which is the tissue located near the cornea through which aqueous humor, or fluid, flows out of the eye.

OMNI allows the ophthalmic surgeon to sequentially complete two distinct, well-established but historically invasive ab externo glaucoma procedures, canaloplasty and trabeculotomy, in an efficient, minimally invasive manner using a single, bloodless and sutureless clear corneal microincision. Microinvasive glaucoma surgery ("MIGS") procedures have a strong demonstrated safety profile, characterized by minimal trauma to the eye and quick patient recovery times. The U.S. Food and Drug Administration ("FDA") has cleared the use of OMNI for reducing IOP in all adult POAG patients both by itself on a standalone basis ("Standalone procedures"), or in combination with cataract surgery ("Combination Cataract procedures"). Several competing MIGS devices, including the current market leaders, have only been cleared or approved by the FDA for use in Combination Cataract procedures for adult patients with mild-to-moderate severity. We estimate that over 85% of the U.S. addressable market opportunity for POAG cannot be served with Combination Cataract procedures because less than 15% of POAG patients receive cataract surgery in any given year.

We believe that OMNI delivers the highest level of effectiveness of any available MIGS product, as it is the only device that provides access to 360 degrees of the diseased conventional outflow pathway through a clear corneal incision to address all three primary points of resistance in the conventional outflow pathway (trabecular meshwork, Schlemm’s canal, and the distal collector channels).

5

OMNI’s indication for use was cleared by the FDA in March 2021 based upon the review of clinical data from ROMEO, our U.S. multi-center clinical study of OMNI in Combination Cataract and Standalone procedures. OMNI has received 510(k) clearance from the FDA and a CE mark to be marketed in the U.S. and the European Union ("EU") respectively, for canaloplasty (microcatheterization and transluminal viscodilation of Schlemm’s canal) followed by trabeculotomy (cutting of trabecular meshwork) to reduce IOP in adult patients with POAG in the U.S. or with open-angle glaucoma ("OAG") in the EU. OMNI is cleared by the FDA to lower IOP in both Combination Cataract and Standalone cases for all adults with POAG. We are pursuing an FDA Investigational Device Exemption ("IDE"), that would authorize us to conduct a clinical study, which we refer to as PRECISION, to assess the safety and effectiveness of a new, higher volume investigational OMNI device to perform canaloplasty alone to lower IOP in adults with POAG. We are intending to conduct this canaloplasty-alone IDE trial to support a premarket notification to the FDA seeking clearance for use to perform canaloplasty-alone procedures in adults with POAG.

We introduced SION in the third quarter of 2022. SION is registered with the FDA as a Class I 510(k) exempt device. SION’s bladeless design, micro-engineered and precision manufactured using specialized lasers, excises tissue without cutting. SION grasps and removes diseased tissue as the surgeon sweeps the instrument around Schlemm’s canal with a single smooth motion. The bladeless technology of SION was developed with leading ophthalmic surgeons to improve safety and ease of use by eliminating the need to navigate sharp instrumentation within the eye’s anterior chamber and iridocorneal angle anatomy. We believe SION represents our third consecutive best-in-category device and satisfies the American Academy of Ophthalmology definition of goniotomy.

SION allows us to serve specific subsets of customers who may prioritize a faster or simpler procedure. Our target customers for SION include three types of combination cataract MIGS surgeons that are distinct from target OMNI customers: 1) high volume cataract surgeons seeking to perform the quickest MIGS procedures, 2) surgeons who are initially less experienced with MIGS such as surgical fellows at academic institutions and 3) surgeons looking for the most cost effective MIGS procedures in facilities that may emphasize procedural profitability. We believe that these use cases have very little overlap with the use cases for our OMNI device.

Our goal is to establish OMNI and SION as the standards of care for POAG patients and goniotomy patients, respectively, by continuing to grow their adoption and utilization in the existing Combination Cataract market segment, which we believe remains underpenetrated and estimate is capturing less than one-third of its current potential procedural volume. We believe training ophthalmic surgeons to use OMNI will help us pioneer the development of the Standalone market segment (over 85% of the potential U.S. POAG market). We believe the consistent therapeutic outcomes OMNI delivers are important for patients and surgeons alike, especially those considering a Standalone MIGS procedure.

We primarily sell OMNI and SION in the U.S. through our dedicated Surgical Glaucoma sales team. Our commercial strategy for OMNI centers on building confidence and conviction among the glaucoma community through continued execution of our clinical trials and publication of their results in peer-reviewed journals. The procedure enabled by OMNI, canaloplasty followed by trabeculotomy, is covered and reimbursed by all Medicare Administrative Contractors ("MACs") and numerous private insurers, covering an estimated 74% of medical benefit covered lives in the U.S. Designed for use in well-established clinical procedures, and with advantages that have been observed to promote safe, effective and highly consistent clinical outcomes, we believe that OMNI has the potential to establish a more proactive, interventional paradigm for IOP reduction in POAG. Our Surgical Glaucoma segment, which includes OMNI and SION, represented 92% of our total revenues for the year ended December 31, 2022.

We currently have one commercial product in our Dry Eye segment. TearCare is a unique open-eye heating and expression device designed to melt and remove meibomian gland obstructions. We believe TearCare has a compelling physiological profile to address obstruction from meibomian gland disease ("MGD") which is the primary cause of evaporative DED, a disease characterized by low quality tears that evaporate prematurely. Dry eye complaints are the most common reason for a patient visit to an eye doctor. There are an estimated 757 million people globally who suffer from DED. DED is the most common reason for a patient visit to an eye doctor, yet of the 38 million people with DED in the U.S., only an estimated 17 million have been diagnosed with DED. Dry eye symptoms have a significant impact on the quality of life and productivity of patients suffering from DED. If left untreated, DED can be extremely painful, leading to permanent cornea damage and vision impairment.

Studies have shown that evaporative DED resulting from MGD is associated with approximately 86% of all DED cases. In healthy eyes, there are 25-30 meibomian glands located within each of the upper and lower eyelids. These glands

6

produce and secrete an oily substance called meibum which forms the outer layer of healthy tears, which is also known as the lipid layer. Meibum normally has an olive oil-like consistency and contributes a vital element of the tear film that prevents premature tear evaporation. In patients with MGD, meibum hardens within the glands causing obstructions that can partially or completely block the oily secretions from reaching the tear film. The resulting compromised outer surface of the tear leads to accelerated tear evaporation and DED. Third-party clinical studies have also demonstrated that treating MGD by liquefying and removing clogged meibum is the most effective method of eliminating obstructions and restoring a healthy tear film lipid layer, thereby preventing premature evaporation of tears.

Our TearCare System is designed to enable ECPs to heat and liquefy meibomian gland blockages, followed promptly by manual, comprehensive clearing of these blockages with a separate clearance tool. We developed TearCare to serve as an elegant, compact, portable, and intuitive solution comprised of the SmartHub™ ("SmartHub"), a reusable hardware controller, and the TearCare SmartLids® ("SmartLids"), a breakthrough, wearable, single-use software-controlled eyelid technology. Applied adhesively and non-invasively to the outside of the eyelids, single-use SmartLids deliver a precise therapeutic level of heat into the meibomian glands. Engineering SmartLids to remain comfortably adhered to virtually all shapes and sizes of eyelids while allowing freedom to blink and delivering precise therapeutic heat is one of our most significant design accomplishments. This heating process follows clinically proven guidelines for temperature and duration required to melt obstructions in the glands and restore the production and secretion of healthy, clear meibum onto the tear surface. The proprietary, highly conformant, open-eye design of TearCare allows patients to blink naturally throughout the thermal portion of the procedure, which provides a comfortable patient experience. TearCare can be utilized by an ECP in a straightforward in-office procedure and can be accommodated during the course of a routine patient visit. Additionally, TearCare does not require a large capital equipment investment by ECPs, and we believe that it offers an attractive economic value proposition to providers, patients and third- party payors.

In OLYMPIA, our large multi-center, randomized control trial ("RCT"), the TearCare procedure was associated with statistically significant clinical improvements in all assessed signs and symptoms of DED. This included tear breakup time ("TBUT"), and meibomian gland secretion score ("MGSS"), objective measurements of DED that were the trial’s primary endpoints, as well as patient-reported symptoms surveys, including Ehlers Danlos syndrome ("EDS"), ocular surface disease index ("OSDI"), and symptom assessment in dry eye ("SANDE"), at all time periods measured (both two weeks and four weeks post-treatment).

We believe the MGD market requires additional ECP and patient education, including clinical data to differentiate procedural and product alternatives, and enhanced patient access through the potential advancement of reimbursement coverage. Our goals with the development of TearCare are to fully transform the current outdated treatment paradigm based primarily on over-the-counter, or OTC, and prescription eyedrops which do not address obstruction of the meibomian glands, the primary root cause of MGD, and establish use of TearCare as the standard of care for the millions of patients suffering from evaporative DED caused by MGD.

In December 2021, the FDA cleared TearCare for the application of localized heat therapy in adult patients with evaporative DED due to MGD, when used in conjunction with manual expression of the meibomian glands.

We focus on continuous innovation and seek regular input from our network of expert employees (including several ophthalmologists on staff), advisors and customers to rapidly iterate our pre- and post-commercial product designs with the aim of better satisfying the needs of our customers and their patients, and increasing adoption and utilization of our solutions.

Our ability to continuously and rapidly innovate our products is a core competency of our company. Our product innovation has resulted in a comprehensive portfolio of 37 issued U.S. patents, 48 issued patents outside of the U.S. (including five issued European patents and their national validations), 19 pending U.S. non-provisional patent applications, 19 pending foreign patent applications and two pending Patent Cooperation Treaty patent applications as of December 31, 2022.

The overall success of our innovative approach to eyecare to date is evidenced by the over 150,000 estimated uses of OMNI and its direct predicates in over 1,600 hospitals and ambulatory service centers ("ASCs") in the U.S. and EU, and over 25,000 estimated uses of TearCare in over 1,000 eyecare facilities in the U.S. through December 31, 2022.

7

Our Solutions

We have designed OMNI, SION, and TearCare to be interventional ophthalmology devices. We believe that both glaucoma and DED are significantly underserved by current treatment offerings and that there are large market opportunities for effective solutions that restore the natural functionality of diseased eyes.

Our Product Development Approach

The past, current, and ongoing development of OMNI, SION, and TearCare follows our internal product development approach, which is governed by four fundamental requirements that we believe are critical to delivering the most effective, safe and consistent clinical outcomes for patients with eye disease.

We aim and expect to be a clinical leader in every eyecare segment we enter and seek to achieve all four criteria in all of our product development projects. From device ideation to commercialization, we take into consideration the perspectives of patients, providers and third-party payors throughout our product development process. When possible, we seek to streamline our product commercialization process by judiciously designing our products to achieve the most efficient routes for FDA clearance or authorization for each applicable indication and reimbursement coverage by third-party payors.

OMNI Surgical System

OMNI is a handheld, single use, therapeutic device for MIGS. OMNI is designed to restore the eye’s natural drainage system without compromising the structural integrity of the eye or leaving implants behind post-surgery.

We believe that OMNI is the first and only multi-procedure MIGS device dually indicated for canaloplasty followed by trabeculotomy. Canaloplasty primarily addresses distal resistance (i.e., collapsed Schlemm’s canal, blocked collector channel ostia) and has some presumed effects on the inner wall of Schlemm’s canal and the trabecular meshwork due to dilation and stretching. In a trabeculotomy procedure, a surgeon unroofs Schlemm’s canal by cutting the trabecular meshwork to provide aqueous humor with direct access to the drainage points in the conventional outflow pathway. Trabeculotomy addresses proximal resistance, which is the outflow resistance in the trabecular meshwork and inner wall of Schlemm’s canal. We believe that the sequential combination of canaloplasty followed by trabeculotomy is uniquely capable of treating all three primary points of resistance in the conventional outflow pathway of the eye. We believe treating all three primary points of resistance is critical to achieving the consistency and level of effectiveness in reducing IOP and medication requirements necessary to expand the use case for MIGS procedures to the Standalone market and to all disease severities among adult POAG patients.

We have applied our medical expertise, as well as specialized design and engineering capabilities, to create a complex device that is simple in appearance and intuitive to use. Each OMNI device consists of 29 separate precision-engineered parts that have been optimized for performance, effectiveness and usability. After inserting the cannula tip into the corneal microincision and accessing Schlemm’s canal, the surgeon can advance and retract the catheter with a fingertip dial up to 180 degrees. Upon retraction of the catheter, OMNI delivers viscoelastic fluid to complete the viscodilation of the relevant portion of Schlemm’s canal. The surgeon can complete a full 360 degree canaloplasty by reinserting the catheter and advancing it in the opposite direction. To perform the trabeculotomy following the canaloplasty, the same microcatheter can be reinserted into Schlemm’s canal and used to deroof the trabecular meshwork in a titratable manner (90, 180, 270 or 360 degrees). OMNI’s versatility and titratable functionality, which we believe is unmatched by other MIGS products currently on the market, enables surgeons to perform sequential comprehensive outflow treatments that they can customize based on an individual patient’s disease severity and eye anatomy in both Combination Cataract and Standalone settings.

8

SION Surgical Instrument

We introduced SION in the third quarter of 2022. SION’s bladeless design, micro-engineered and precision manufactured using specialized lasers, excises tissue without cutting. SION grasps and removes diseased tissue as the surgeon sweeps the instrument around Schlemm’s canal with a single smooth motion. The bladeless technology of SION was developed with leading ophthalmic surgeons to improve safety and ease of use by eliminating the need to navigate sharp instrumentation within the eye’s anterior chamber and iridocorneal angle anatomy. We believe SION represents our third consecutive best-in-category device and satisfies the American Academy of Ophthalmology definition of goniotomy.

TearCare System

In an effort to address the treatment of evaporative DED due to MGD, we custom designed TearCare to facilitate what we believe is the optimal method for clearing meibomian gland obstructions based on numerous clinical studies: warming the glands to a minimum of 41 degrees Celsius for 15 minutes to melt congealed meibum followed by manual, clinician customized and performed removal of the liquefied obstructions using forceps to help facilitate restoration of healthy meibum production to naturally fortify the tear’s protective lipid layer. The goal of TearCare treatments is to restore the eyelid’s natural ability to produce healthy lipid secretions and recover the integrity of the tear film.

Our TearCare System includes a pair of single-use SmartLids, the first wearable, highly conformant, precision heating device for the eyelids. SmartLids allow for eyes to be open and blink during the thermal portion of the process and are software-controlled, delivering precise heat to the tarsal plates of the eyelids directly overlying the meibomian glands while continuously monitoring temperature and communicating 144 times per second with the SmartHub, a compact, finely calibrated power source and control unit which can make instantaneous adjustments to ensure delivery of the desired amount of heat and therapeutic temperature level. Engineering SmartLids to remain comfortably adhered to virtually all shapes and sizes of eyelids while allowing freedom to blink and delivering precise therapeutic heat is one of our most significant design accomplishments. Following therapeutic heat application by TearCare, ECPs may use forceps to manually express melted meibum from each gland. ECPs can tailor the amount of pressure applied during expression to specific glands based on a desired full evacuation of the glands, thereby allowing the eyelids to resume the production and secretion of meibum to coat and protect tears.

According to patient and ECP feedback, treatments using TearCare are comfortable for patients since they can keep their eyes open during the thermal portion of the procedure and have the freedom to blink naturally. Additionally, TearCare was designed to be administered during the course of a routine office visit to an ECP, which makes it convenient for patients, and allows providers to maintain procedural throughput in their practices. We believe that these features of the patient and ECP experience with TearCare procedures offer a stark contrast to other available alternatives which we believe are burdened by ineffective and suboptimal product design, including awkward and uncomfortable patient experiences through closed eye solutions and/or manual solutions that require extremely close patient proximity to the ECP throughout the treatment.

Our Success Factors

Our mission is to transform eyecare by developing products that address the underlying causes of the world’s most prevalent eye diseases. We design our products to enable ECPs to perform safe and effective interventional procedures that can transform treatment paradigms. We believe the following success factors will drive the growth of our company:

9

Our Growth Strategy

The fundamental objectives of our growth strategy are to establish robust clinical data to support the development of our target markets and the continued commercialization of our products and to deliver an exceptional customer experience to the ECPs and patients who utilize our products. Our current growth strategies include:

Clinical Data

We believe that treatment decisions should be evidence-based and hold ourselves to the highest clinical and ethical standards to build and maintain credibility in the medical community. We are deeply committed to conducting studies to evaluate the safety, effectiveness and durability of treatments using our products, and subjecting the results to the rigorous peer review process for publication in leading journals. Our robust and growing libraries of evidence to support OMNI, SION and TearCare are helping to drive their awareness and adoption, and ultimately advancing patient care in ophthalmology and optometry.

We are currently conducting active and robust clinical trial programs in both POAG and MGD. Our clinical trial designs include both RCTs, prospective, and retrospective real-world studies, based on our belief that each of these approaches has unique strengths. We also plan to continue supporting our investigator-initiated trial program.

OMNI Surgical System

OMNI Clinical Program Overview

Building on a solid foundation of completed and ongoing clinical trials, we are investing significant resources to further develop clinical data regarding the use of OMNI. Since 2018, there have been 21 articles published in peer-reviewed journals for OMNI and its Sight Sciences predicate devices and procedures. Our completed trials include ROMEO, GEMINI, and TREY. ROMEO was used to support OMNI’s indication for use expansion in the U.S. in March 2021 and resulted in two published articles in peer-reviewed journals. GEMINI was a prospective, multi-center, historical control, single-arm, U.S. study. TREY was a multi-center study evaluating the effectiveness of Standalone intervention using OMNI in eyes with uncontrolled IOP previously treated with trabecular bypass canal implants.

10

Table 1: Sight Sciences OMNI Ongoing and Planned Clinical Studies

TearCare System

TearCare Clinical Program Overview

We designed TearCare to comprehensively address MGD, which we believe to be the primary underlying cause of evaporative DED. We have developed robust clinical data evaluating TearCare. We have completed one RCT for TearCare ("OLYMPIA") and we completed enrolling patients in our SAHARA RCT ("SAHARA") in the third quarter of 2022. Data from OLYMPIA supported the FDA clearance of TearCare’s expanded indication for use in December 2021. We plan to leverage the results of our OLYMPIA and SAHARA studies to support FDA clearances to further expand indications for use of TearCare and to support our patient access strategy.

Table 2: Sight Sciences TearCare Ongoing Clinical Study

Commercial Approach

We have built a world-class direct sales commercial organization that features professionals and executives with substantial leadership experience from leading ophthalmic product companies. In particular, we have recruited professionals with track records that include launching new technologies, growing primary demand, changing treatment paradigms and securing market access from payors. We believe this expertise is crucial to achieve our market development objectives for interventional Standalone MIGS and MGD treatment. Sales representatives typically have relevant experience across all facets of medical device and/or pharmaceutical sales focused on eyecare to ensure the development of a trusted consultative relationship with our ECPs. As we have continued to develop additional clinical data and brand recognition, we believe our team has differentiated our product offerings and gained commercial traction through exceptional, highly involved training, support and ongoing professional education. As of December 31, 2022, our overall commercial team consisted of over 150 professionals dedicated to sales, marketing, commercial support, training and professional relations.

We created distinct sales, marketing, and training teams for each of our business units because their products are predominantly sold to different types of customers and require specialized product specific sales expertise and ECP training to integrate our products into their practices. We sell OMNI and SION to facilities where ophthalmic surgeons perform outpatient procedures, mainly ASCs and hospital outpatient departments ("HOPDs"). We sell TearCare to optometry and ophthalmology practices.

Our marketing efforts are centered around increasing awareness of our products and presenting clinical study results through leading medical publications and at large industry and scientific meetings, both directly and through our advisors.

11

We have also partnered with qualified ECPs to speak to peers on our behalf through educational forums either in-person or via virtual meetings. Clinical data that demonstrate the benefits of OMNI and TearCare for their authorized uses will continue to underpin our commercial efforts and we will continue to devote significant resources to conduct new clinical studies and publish articles in peer-reviewed journals.

Reimbursement

There are three primary aspects of reimbursement in the United States: coding, coverage and payment. Each aspect is an important determinant of our customers’ ability to obtain appropriate reimbursement.

12

Our commercial activities are substantially within the United States. We sell our Surgical Glaucoma products primarily to ASCs and HOPDs, who in turn bill various third-party payors, such as Medicare and private health insurance plans for the healthcare services and resources rendered to treat a patient. TearCare is not currently covered or paid by Medicare or private payors under any formal policy, although some payors may agree to provide case-based coverage outside of a formal policy. Our market access team facilitates patient access to the OMNI, SION and TearCare systems by engaging payors on coverage, coding and payment matters, and by providing support to patients and our customers as they seek reimbursement from payors that do not have positive coverage or those that do not have formal policies in place regarding our products.

Reimbursement for Uses of the OMNI Surgical System and SION Surgical Instrument

Surgeons are able to use OMNI to sequentially perform two well-established glaucoma procedures, canaloplasty followed by trabeculotomy.

Canaloplasty and goniotomy are covered by the Medicare Administrative Contractors ("MACs"), outside of a formal coverage policy. Widespread coverage is important for commercial adoption. Based on POAG prevalence, we estimate that currently over 60% of patients who receive glaucoma treatment using OMNI are covered by Medicare, and that this percentage may decline modestly over time as usage of OMNI expands to include patients with a broader range of OAG progression. Private payor coverage policies vary for canaloplasty and for goniotomy. In the United States, some commercial payors, including numerous Blue Cross Blue Shield plans, have published medical policies that consider canaloplasty medically necessary for the treatment of glaucoma, though specific criteria for coverage may vary depending on the payor. Additionally, as with many healthcare items and services, some health plans cover the procedures performed using OMNI and SION outside of a formal coverage policy. Where coverage is less consistent or is limited, as is the case with certain commercial payors, our market access team works with payors directly and with customers to facilitate patient access to our Surgical Glaucoma products by working towards securing appropriate coverage and reimbursement. We have established and continue to build a substantial library of clinical trial and health economics outcomes research ("HEOR") data and published articles to directly address the needs of payors. We believe that the results from our completed, in-progress and planned clinical trials and subsequent accompanying peer-reviewed articles will help to expand and solidify coverage of canaloplasty and goniotomy and the use of OMNI and SION. We estimate that, as of December 31, 2022, approximately ­­­­­­74% of people with medical benefit coverage have reimbursed access to the canaloplasty procedures

13

and/or OMNI specifically under such coverage. In particular, we continue to proactively engage with the remaining key national and regional payors currently not covering canaloplasty and/or OMNI to seek reversals of their current non-coverage policies.

Virtually all sales of OMNI and SION in the U.S. are to ASCs and HOPDs. Surgeons may use OMNI to perform canaloplasty and trabeculotomy sequentially, with CPT code 66174 used to report the procedure. Surgeons may use SION to perform goniotomy, using CPT code 65820, to report the procedure. Per Medicare and many private payor payment policies, when certain procedures are performed in the ASC setting, such as cataract surgery, canaloplasty and goniotomy, multiple procedure payment reduction rules apply. Therefore, when a canaloplasty or goniotomy is performed with cataract surgery on the same patient on the same day, payment of the lower-cost procedure (most commonly the cataract procedure) is reduced by 50%. Multiple procedure payment reduction rules also typically apply to professional services. Physicians are likely to be paid at a reduced rate for lower valued procedures when performed concomitantly. In the HOPD setting, Medicare procedures performed using OMNI and SION as well as cataract procedures, are paid under comprehensive ambulatory payment classifications ("C-APCs"). In these circumstances, the highest valued code is paid at 100%, with payment for additional procedures performed during the same operative session bundled into the single highest payment rate. Many commercial payers use a similar payment methodology, but payment rules can vary across health plans, particularly across plan types (e.g., HMO, PPO, POS).

In the ASC setting, the 2023 Medicare national unadjusted average facility payment rate for CPT code 66174 and CPT code 65820 are $1,968.66. In the HOPD setting, the 2023 Medicare national unadjusted average facility payment rates for CPT code 66174 and CPT code 65820 are $3,995.58. These payments are classified as comprehensive C-APCs, therefore in the HOPD setting, the highest valued code will be paid and other C-APC classified procedures will be bundled into the highest paid procedure. Regardless of facility setting, the Medicare national unadjusted physician payment rates for CPT code 66174 and CPT code 65820 are $622.17 and $827.19, respectively. Based on customer feedback, we believe the rates for facility and physician reimbursement in both settings reflect attractive and reasonable payments to cover all of our customers’ costs and economic needs related to glaucoma treatments using OMNI and SION.

While commercialization of OMNI has primarily been focused on the U.S., we have also begun international commercialization efforts. Outside the U.S., we have focused our efforts in the United Kingdom and Germany, where we have hired local commercial and market access teams to promote OMNI to health care professionals. Although Germany employs a single-payor health system and national MIGS procedure codes which include canaloplasty and trabeculotomy, coverage decisions are made on a decentralized basis by the Physician’s Associations (Kassenärztliche Vereinigung) ("KVs") in each of Germany's 17 regions. To date, canaloplasty and trabeculotomy procedures are covered in all 17 regions and we are working towards educating ECPs across all these regions regarding the appropriate procurement and submission of claims for reimbursement from the KVs to facilitate access to OMNI for patients and ECPs. In the United Kingdom, we are in the process of working to expand reimbursed access to OMNI procedures, and we believe that the National Health System’s tariffs, or payments, for MIGS procedures (including OMNI) will continue to be favorable. As we expand into other countries, we will establish payor coverage and reimbursement strategies that are appropriate for each local market.

Reimbursement for Uses of the TearCare System

TearCare is not currently covered by Medicare or private payors via formal medical policy, although some payors may agree to provide coverage and payment outside of formal policy. In December 2021, the FDA cleared TearCare for the application of localized heat therapy in adult patients with evaporative dry eye disease due to meibomian gland dysfunction, when used in conjunction with manual expression of the meibomian glands. We believe that the current standard of care (representing over 95% of the existing market), which primarily consists of warm compresses, over-the-counter artificial tears, or lubricating eyedrops, and prescription eyedrops, does not treat the root cause of MGD. We believe TearCare has the potential to offer a better standard of care for evaporative dry eye patients and reduce overall costs for payors.

Despite the presence of a large and growing patient-pay market for TearCare as shown in our controlled launch, we believe that improving access to TearCare through positive coverage decisions by Medicare and private payors will help grow the market for the TearCare procedures. We are pursuing a vigorous market access development plan to obtain more favorable policies from Medicare and private payors for procedures using TearCare in the U.S.

14

Category III CPT code 0563T, which became effective January 1, 2020, describes the heating of meibomian glands using a wearable open-eye device and manual evacuation of meibomian glands. This code allows providers to pursue reimbursement claims and payors to establish payment rates for the procedure. Prior to formal coverage decisions or a permanent Category I code, third-party payors may cover procedures billed with temporary Category III codes on a case-by-case basis.

We continue to generate clinical data to support positive coverage decisions from Medicare and private payors. In September 2021, an article discussing results from our OLYMPIA RCT was published in Cornea. This randomized controlled trial compared treatment using TearCare to the leading alternative MGD treatment device on the market. In the study, we observed that a single use of TearCare was associated with improvement in each of the signs and symptoms of DED within two weeks of treatment in subjects with MGD. A subset analysis of patients in the OLYMPIA trial with advanced dry eye disease demonstrating superior symptoms improvements with TearCare compared to an alternative MGD treatment device was published in Clinical Ophthalmology (August 2022). Additionally, results from the CHEETAH study suggesting that a single TearCare procedure is safe and effective in treatment signs and symptoms of DED were published in Clinical Ophthalmology (December 2020).

Our comprehensive long-term strategy to improve patient access to TearCare includes the following key initiatives:

Competition

We believe our focus on developing and marketing intuitively designed products that are intended to restore the eye’s natural physiological function by addressing underlying causes of eye disease will be an important factor in our future success. The medical device and pharmaceutical industries are intensely competitive, subject to rapid change and significantly affected by new product introductions and other market activities of industry participants. We compete with medical device and pharmaceutical companies that develop and commercialize products for eye conditions. Notable competitors with approved MIGS products include Glaukos, Alcon/Ivantis and AbbVie/Allergan and New World Medical. Notable competitors with approved DED products include AbbVie/Allergan, Novartis, Johnson & Johnson, and Alcon. Some of our competitors are larger, well-capitalized companies with greater current market share and resources. We also compete with several smaller medical device companies that have single products or a limited range of products. Some of our competitors have:

We compete primarily on the basis that our medical devices are able to treat patients with prevalent eye diseases safely and effectively. Our continued success depends on our ability to:

15

Manufacturing

On January 14, 2021, we entered into a Supply Agreement with Peter’s Technology (Suzhou) CO LTD. ("PTCS"), a Chinese subsidiary of Peter’s Co., Ltd., a Taiwan-based contract manufacturer ("the Peter's Supply Agreement"). In February 2021, PTCS began to produce commercially saleable OMNI units for us at its Suzhou City, China production facility. In May 2021, we entered into a separate supply agreement with a U.S.-based manufacturer with multiple manufacturing sites for the production in the United States of our OMNI Surgical System. Our supply agreements with these manufacturers contain customary terms and conditions. Pursuant to the Peter’s Supply Agreement, PTCS purchases components from our approved suppliers for assembly, and we make purchases from PTCS on a purchase order basis. The initial three-year term of the Peter’s Supply Agreement expires January 14, 2024, and the agreement provides for automatic renewals of additional one-year periods if neither party provides notification that they intend to terminate the agreement within 90 days of the term ending. We also have the right to terminate the agreement without cause during its term by providing 180 days’ advance written notice, or with 30 days’ written notice with any material agreement default by the manufacturer. We subsequently amended the Peter’s Supply Agreement in January and November 2022 to, among other things, contract with PTCS to manufacture our SmartLids and SION surgical instruments.

For the production of our TearCare System components, we currently have supply arrangements with several medical device manufacturers. In addition to our agreement with PTCS for the production of SmartLids, we partner with various other suppliers for the production of the SmartHub and Clearance Assistant components of our TearCare System.

We directly engage with several third-party suppliers for key components used in our products. We believe that our approved third-party suppliers will be adequate to meet our current and anticipated manufacturing needs. We do not currently plan to manufacture our products or any related components ourselves.

Manufacturing facilities that produce medical devices or their component parts intended for distribution world-wide are subject to regulation and periodic unannounced inspection or audits by the FDA and other domestic and international regulatory agencies or notified bodies. In the United States, any products we sell are required to be manufactured in compliance with the FDA’s Quality System Regulation ("QSR"), which covers the methods used in, and the facilities used for, the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products.

The distribution of our products is handled directly through a third-party logistics provider. Our finished goods are shipped from our contract manufacturers to a local gamma sterilization facility after which they are shipped to distribution facilities and, ultimately, to our customers.

Intellectual Property

Our commercial success depends in part on our ability to obtain and maintain proprietary protection for our current and future products and product candidates, novel discoveries, product development technologies and know-how; to operate without infringing on the proprietary rights of others; and to prevent others from infringing our proprietary rights. Our policy is to seek to protect our proprietary position by, among other methods, seeking to obtain or in-licensing U.S. and foreign patents and patent applications related to our proprietary technology that are important to the development and implementation of our business. We seek to obtain domestic and international patent protection, and endeavor to promptly file patent applications for new commercially valuable inventions. We file new patent applications as we conduct research and development, initiate new programs, and monitor the activities of others. We also rely on other approaches to protecting our proprietary position, such as trademarks, trade secrets, know-how, and/or continuing technological innovation to develop and maintain our proprietary position.

16

Patent Term

Generally, issued patents are granted a term of 20 years from the earliest claimed non-provisional filing date. In certain instances, U.S. patent terms can be adjusted to recapture a portion of delay by the U.S. Patent & Trademark Office ("USPTO"), in examining the patent application ("patent term adjustment") or extended to account for term effectively lost as a result of the FDA regulatory review period ("patent term extension"), or both. In some cases, the term of a U.S. patent may be shortened by terminal disclaimer, such that its term is reduced to end with that of an earlier-expiring patent.

Trade Secrets

In addition to patents, we rely on trade secrets and know-how to develop and maintain our competitive position. We typically rely on trade secrets to protect aspects of our business that are not amenable to, or that we do not consider appropriate for, patent protection. It is our policy to protect trade secrets and/or know-how by establishing confidentiality agreements and invention assignment agreements with our employees, consultants, scientific advisors, contractors and collaborators. These agreements provide that all confidential information developed or made known during the course of an individual or entity’s relationship with us must be kept confidential during and after the relationship. These agreements also provide that all inventions resulting from work performed for us or relating to our business and conceived or completed during the period of employment or assignment, as applicable, shall be our exclusive property. In addition, we take other appropriate precautions, such as physical and technological security measures, to guard against misappropriation of our proprietary information by third parties.

Patents

As of December 31, 2022, we owned 37 issued U.S. patents, 48 issued patents outside the U.S. (which includes five issued European patents and their national validations), 19 pending U.S. non-provisional patent applications, 19 pending foreign patent applications and two pending Patent Cooperation Treaty patent applications. Our issued patents include claims directed to devices and methods for canaloplasty and/or trabeculotomy, ocular implants and related methods, the TearCare apparatus and methods of using the TearCare apparatus, components of the TearCare apparatus (including the SmartHub and SmartLids) and methods of their use, the TearCare apparatus in combination with an eyelid compression instrument and methods of their use, and methods of using the TearCare apparatus with patients wearing contact lenses.

Subject to payment of required maintenance fees, annuities, and other charges, our issued U.S. patents have expiration dates between 2027 and 2041, with seven of our issued U.S. patents having expiration dates before 2030, 27 having expiration dates between 2031 and 2035, one having an expiration date in 2037, and the remaining two expiring in 2041, in each case exclusive of possible patent term extensions. Of our 19 pending U.S. non-provisional patent applications, one was filed in 2018, two were filed in 2019, three were filed in 2020, five were filed in 2021, and eight were filed in 2022. Our pending U.S. non-provisional patent applications, if issued, have expected expiration dates between 2026 and 2042, exclusive of any possible patent term adjustments or patent term extensions.

The foreign jurisdictions where we own issued patents include: Australia, Brazil, China, France, Germany, Hong Kong, Italy, Japan, Spain, Switzerland, and the United Kingdom. Subject to payment of required annuities and other charges, these foreign patents have expiration dates between 2027 and 2035. We have pending patent applications in Australia, Brazil, Canada, China, Europe, and Japan which, if issued, have expected expiration dates between 2032 and 2040.

As of December 31, 2022, we owned eight U.S. trademark registrations, one EU trademark registration, one German trademark registration, one Swiss trademark registration, one UK trademark registration, four pending U.S. trademark applications, two pending Brazilian trademark applications, and one pending application for an International Registration designating Australia, EU, Japan, Korea, Mexico, and Singapore.

Government Regulation

Our products and our operations are subject to extensive regulation by the FDA and other federal, state, and local authorities in the United States, as well as comparable authorities in foreign jurisdictions. Our products are subject to regulation as medical devices in the United States under the Federal Food, Drug, and Cosmetic Act ("FDCA") and its implementing regulations.

17

United States Regulation

The FDA regulates, among other things, the development, design, non-clinical and clinical testing, manufacturing, safety, effectiveness, labeling, packaging, storage, installation, servicing, recordkeeping, premarket clearance or approval, adverse event reporting, advertising, promotion, marketing and distribution, and import and export and post-marketing surveillance of medical devices in the United States to ensure that medical devices distributed domestically are safe and effective for their intended uses and otherwise meet the requirements of the FDCA.

FDA Premarket Clearance and Approval Requirements

Unless an exemption applies, each new or significantly modified medical device commercially distributed in the United States requires either FDA clearance of a 510(k) premarket notification, or approval of a premarket approval ("PMA"), application.

Under the FDCA, medical devices are classified into one of three classes—Class I, Class II or Class III— depending on the degree of risk associated with each medical device and the extent of manufacturer and regulatory control needed to ensure its safety and effectiveness.

Class I devices are those for which safety and effectiveness can be assured by adherence to the FDA’s general controls for medical devices, which include compliance with the applicable portions of FDA’s current good manufacturing practices for devices, as reflected in the QSR, establishment registration and device listing, reporting of adverse medical events, and truthful and non-misleading labeling, advertising, and promotional materials. Most Class I devices are exempt from the premarket notification requirements. Some Class I devices, called Class I reserved devices, require premarket clearance by the FDA through the 510(k) premarket notification process described below.

Class II devices are subject to the FDA’s general controls, and any other special controls deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, special labeling requirements, post-market surveillance, patient registries and FDA guidance documents.

Most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA requesting permission to commercially distribute the device. The FDA’s permission to commercially distribute a device subject to a 510(k) premarket notification is generally known as 510(k) clearance.

Class III devices include devices deemed by the FDA to pose the greatest risks, such as life sustaining, life supporting or some implantable devices, or devices that have a new intended use, or use advanced technology that is not substantially equivalent to that of a legally marketed device, requiring approval of a PMA. Due to the level of risk associated with Class III devices, the FDA’s general controls and special controls alone are insufficient to assure their safety and effectiveness. Devices placed in Class III require the submission of a PMA application demonstrating the safety and effectiveness of the device, which must be approved by the FDA prior to marketing. The PMA approval process is generally more costly and time consuming than the 510(k) process. A PMA application typically includes, but is not limited to, extensive technical information regarding device design and development, pre-clinical and clinical trial data, manufacturing information, labeling and financial disclosure information for the clinical investigators in device studies.

Our currently marketed OMNI and TearCare products are regulated as Class II devices subject to 510(k) clearance. Our SION surgical instrument is registered with the FDA as a Class I 510(k) exempt device.

Clinical Trials

Clinical trials are almost always required to support a PMA and are sometimes required to support a 510(k) submission. In the United States, absent certain limited exceptions, human clinical trials intended to support medical device clearance or approval or to determine safety and effectiveness of a device for an investigational use must be conducted in accordance with the FDA’s investigational device exemption, or IDE, regulations which govern investigational device labeling, prohibit promotion of the investigational device, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. If the device presents a “significant risk,” to human health, as defined by the FDA, the FDA requires the device sponsor to submit an IDE application to the FDA, which must be approved in advance by the FDA for a specified number of subjects.

18

If the device under evaluation does not present a significant risk to human health, then the device sponsor is not required to submit an IDE application to the FDA before initiating human clinical trials, but must still comply with abbreviated IDE requirements when conducting such trials.

Regardless of the degree of risk presented by the medical device, clinical studies must be approved by, and conducted under the oversight of an institutional review board ("IRB") for each clinical site. If an IDE application is approved by the FDA and one or more IRBs, human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate approval from the FDA, but must still follow abbreviated IDE requirements. Clinical trials are subject to extensive monitoring, recordkeeping and reporting requirements. Clinical trials must be conducted under the oversight of an IRB, and the relevant clinical trial sites and must comply with FDA regulations, including but not limited to those relating to good clinical practices. To conduct a clinical trial, we also are required to obtain the subjects’ informed consent in form and substance that complies with both FDA requirements and state and federal privacy and human subject protection regulations. We, the FDA, or the IRB, could suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits. Even if a trial is completed, the results of clinical testing may not adequately demonstrate the safety and effectiveness of the device or may otherwise not be sufficient to obtain FDA clearance or approval to market the product in the United States. Similarly, in Europe, the clinical study must be approved by a local ethics committee and in some cases, including studies with high-risk devices, by the ministry of health in the applicable country.

During a study, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping and prohibitions on the promotion of investigational devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to FDA’s regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the investigational device, and comply with all reporting and recordkeeping requirements, and satisfy state and federal privacy and human subject protection regulations. Additionally, after a trial begins, we, the FDA or the IRB could suspend or terminate a clinical trial at any time for various reasons, including a belief that the potential benefits of the study are outweighed by cost, safety, or other factors.

510(k) Clearance Process

Under the 510(k) process, the manufacturer must submit to the FDA a premarket notification submission demonstrating that the proposed device is “substantially equivalent,” as defined in the FDCA, to a legally marketed predicate device.

A predicate device is a legally marketed device that is not subject to premarket approval and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I, or a device that was found substantially equivalent through the 510(k) process. A device is considered to be substantially equivalent if, with respect to the predicate device, it has the same intended use and has either (i) the same technological characteristics; or (ii) different technological characteristics, but the information provided in the 510(k) submission demonstrates that the device does not raise different questions of safety or effectiveness than the predicate device.

Before the FDA will accept a 510(k) premarket notification for substantive review, the FDA will first assess whether the submission satisfies a minimum threshold of acceptability. If a 510(k) submission is accepted for substantive review, the Medical Device User Fee Amendments sets a performance goal of 90 days for FDA review of a 510(k) submission, but the review time can be delayed if FDA raises questions or requests addition information during the review process. As a practical matter, clearance often takes longer than 90 days. Although many 510(k) premarket notifications are cleared without clinical data, the FDA may require further information, including clinical data, to make a determination regarding substantial equivalence, which may significantly prolong the review process. If the FDA agrees that the device is substantially equivalent, it will grant clearance to commercially market the device.

If the FDA determines that the device is substantially equivalent to a predicate device, it will grant 510(k) clearance to commercially market the device. If the FDA determines that the device is “not substantially equivalent” to a previously cleared device, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous requirements of the PMA approval process, or can request a risk-based classification determination for the device

19

in accordance with the “de novo” process, which is a route to market for certain novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) clearance or, depending on the modification, PMA approval or de novo reclassification. The FDA requires each manufacturer to determine whether the proposed change requires submission of a 510(k), de novo request or a PMA in the first instance, but the FDA may review this determination to evaluate the regulatory status of the modified product at any time and may require the manufacturer to cease marketing and/or request the recall of the modified device until 510(k) marketing clearance or PMA approval is obtained or a de novo request is granted. Also, in these circumstances, the manufacturer may be subject to significant regulatory fines or penalties.

Over the last several years, the FDA has proposed reforms to its 510(k) clearance process, and such proposals could include increased requirements for clinical data and a longer review period, or could make it more difficult for manufacturers to utilize the 510(k) clearance process for their products.

Ongoing Regulation by the FDA

Even after the FDA permits a device to be marketed, numerous and pervasive regulatory requirements continue to apply. These include:

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, will require a new 510(k) or possibly a PMA. The FDA requires each manufacturer to make this determination initially, but the FDA can review any such decision and can disagree with a manufacturer’s determination. If the FDA disagrees with our determination not to seek a new 510(k) clearance, the FDA may retroactively require us to seek 510(k) clearance or possibly a PMA. The FDA could also require us to cease marketing and distribution and/or recall the modified device until 510(k) clearance or a PMA is obtained. Also, in these circumstances, we may be subject to significant regulatory fines and penalties.

Some changes to an approved PMA device, including changes in indications, labeling, or manufacturing processes or facilities, require submission and FDA approval of a new PMA application or PMA supplement, as appropriate, before the change can be implemented. Supplements to a PMA often require the submission of the same type of information required

20

for an original PMA application, except that the supplement is generally limited to that information needed to support the proposed change from the device covered by the original PMA. The FDA uses the same procedures and actions in reviewing PMA supplements as it does in reviewing original PMA applications.

FDA regulations require us to register as a medical device manufacturer with the FDA. Additionally, some states also require medical device manufacturers and/or distributors doing business within the state to register with the state or apply for a state license, which could subject our facility to state inspection as well as FDA inspection on a routine basis for compliance with the QSR and any applicable state requirements. These regulations require that we manufacture our products and maintain related documentation in a prescribed manner with respect to manufacturing, testing and control activities.

Manufacturing processes for medical devices are required to comply with the applicable portions of the QSR, which cover the methods and the facilities and controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation and servicing of finished devices intended for human use. As a manufacturer, we are subject to periodic scheduled or unscheduled inspections by the FDA. Failure to maintain compliance with the QSR requirements could result in the shutdown of, or restrictions on, manufacturing operations and the recall or seizure of marketed products, which would have a material adverse effect on our business. The discovery of previously unknown problems with any of our products, including unanticipated adverse events or adverse events of increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or off-label by a physician in the practice of medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls.

The FDA has broad regulatory compliance and enforcement powers. If the FDA determines that a manufacturer has failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:

International Regulation of Our Products

Our research, development, and clinical programs, as well as our manufacturing and marketing operations, are subject to extensive regulation in other countries. For example, the EU has adopted specific directives regulating the design, manufacture, clinical investigations, conformity assessment, labeling and adverse event reporting for medical devices. EU directives must be implemented into the national laws of the EU member states and national laws may vary from one member state to another.

Until May 25, 2021, medical devices were regulated by Council Directive 93/42/EEC ("Medical Devices Directive") which has been repealed and replaced by Regulation (EU) No 2017/745 ("EU MDR"). Our current certificates have been granted under the Medical Devices Directive. However, as of May 26, 2021, some of the EU MDR requirements apply in place of the corresponding requirements of the Medical Devices Directive, with regard to registration of economic operators and of devices, post-market surveillance and vigilance requirements. Pursuing marketing of medical devices in the EU will notably require that our device be certified under the new regime set forth in the EU MDR when our current certificates expire. The current expiration date for our OMNI system certificate is May 26, 2024; however, on January 6, 2023, the European Commission issued a proposal that was subsequently approved by the European Parliament and

21

Council. This will extend the period during which devices similar to our OMNI device can continue to be placed in the EU market from May 26, 2024 to May 2028. The measure becomes effective upon publication in the EU Commission Journal.

Medical Devices Regulation

On April 5, 2017, the EU MDR was adopted. The EU MDR establishes a uniform, transparent, predictable and sustainable regulatory framework across the EU for medical devices and ensure a high level of safety and health while supporting innovation. Unlike the Medical Devices Directive, the EU MDR is directly applicable in EU member states without the need for member states to implement into national law. This aims at increasing harmonization across the EU.

The EU MDR became effective on May 26, 2021. The new regulation among other things:

The aforementioned EU rules are generally applicable in the European Economic Area ("EEA"), which consists of the 27 EU member states plus Norway, Liechtenstein and Iceland. Other countries, such as Switzerland, have entered into Mutual Recognition Agreements and allow the marketing of medical devices that meet EU requirements. As of January 1, 2021, the United Kingdom has entered a transition period following Brexit. During that period, the UK Medical Devices Regulations ("UK MDR") 2002 remains applicable in England, Scotland and Wales (Great Britain). During 2021, a UK Responsible Person was appointed and we registered the OMNI System with the Medicines and Healthcare products regulatory agency. Valid CE marks will continue to be accepted in Great Britain, and the requirement to obtain a UK Conformity Assessed ("UKCA") mark has been delayed until July 2024.

The current expiration date for our OMNI system certificate is on May 26, 2024. However, on January 6, 2023, the European Commission issued a proposal that was subsequently approved by the European Parliament and Council. This proposal, which becomes effective upon its publication in the EU Commission Journal, will extend the period during which devices similar to our OMNI device can continue to be placed on the EU market from May 26, 2024 to December 31, 2028.

Healthcare Fraud and Abuse Laws

In the United States, we are subject to a number of federal and state healthcare regulatory laws that restrict business practices in the healthcare industry. These laws include, but are not limited to, federal and state anti- kickback, false claims, transparency and other healthcare fraud and abuse laws.

The U.S. federal Anti-Kickback Statute prohibits, among other things, any person or entity from knowingly and willfully offering, paying, soliciting, receiving or providing any remuneration, directly or indirectly, overtly or covertly, to induce or in return for purchasing, leasing, ordering, or arranging for or recommending the purchase, lease, or order of any good, facility, item or service reimbursable, in whole or in part, under Medicare, Medicaid or other federal healthcare programs. The term “remuneration” has been broadly interpreted to include anything of value, including cash, improper

22

discounts, and free or reduced price items and services. Among other things, the Anti-Kickback Statute has been interpreted to apply to arrangements between medical device manufacturers on the one hand and prescribers and purchasers on the other. Although there are a number of statutory exceptions and regulatory safe harbors protecting some common activities from prosecution, the exceptions and safe harbors are drawn narrowly. The government can exercise enforcement discretion in taking action against unprotected activities. Further, a person or entity does not need to have actual knowledge of the statute or specific intent to violate it in order to have committed a violation. The majority of states also have anti- kickback laws, which establish similar prohibitions, and in some cases may apply to items or services reimbursed by any third-party payor, including commercial insurers and self-pay patients.

The federal false claims, including the civil False Claims Act, prohibit, among other things, any person or entity from knowingly presenting, or causing to be presented, a false, fictitious or fraudulent claim for payment to, or approval by, the federal government, knowingly making, using, or causing to be made or used a false record or statement material to a false or fraudulent claim to the federal government, or knowingly making a false statement to avoid, decrease or conceal an obligation to pay money to the U.S. federal government. A claim includes “any request or demand” for money or property presented to the U.S. government. Actions under the civil False Claims Act may be brought by the Attorney General or as a qui tam action by a private individual in the name of the government. Moreover, a claim including items or services resulting from a violation of the U.S. federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act. In addition, various states have enacted false claim laws analogous to the federal False Claims Act, although many of these state laws apply where a claim is submitted to any third-party payor and not merely a federal healthcare program.

The federal Health Insurance Portability and Accountability Act of 1996 ("HIPAA") created additional federal criminal statutes that prohibit, among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. Similar to the U.S. federal Anti-Kickback Statute, a person or entity does not need to have actual knowledge of the statute or specific intent to violate it in order to have committed a violation.

The federal Physician Payments Sunshine Act requires certain manufacturers of drugs, devices, biologics and medical supplies for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program ("CHIP"), with specific exceptions, to report annually to CMS information related to payments or other transfers of value made to physicians (defined to include doctors, dentists, optometrists, podiatrists and chiropractors), and teaching hospitals, and applicable manufacturers and applicable group purchasing organizations to report annually to CMS ownership and investment interests held by physicians and their immediate family members. Beginning in 2022, such obligations will include payments and other transfers of value provided in the previous year to additional healthcare professionals, including physician assistants, nurse practitioners, clinical nurse specialists, certified nurse anesthetists, anesthesiologist assistants and certified nurse midwives.

Violations of fraud and abuse laws, including federal and state anti-kickback and false claims laws, may be punishable by criminal and civil sanctions, including fines and civil monetary penalties, the possibility of exclusion from federal healthcare programs (including Medicare and Medicaid), disgorgement and corporate integrity agreements, which impose, among other things, rigorous operational and monitoring requirements on companies. Similar sanctions and penalties, as well as imprisonment, also can be imposed upon executive officers and employees of such companies.

Coverage and Reimbursement

In the United States, our currently cleared products are not separately reimbursed by any third-party payors, and if covered, are paid for as part of the procedure in which the product is used. Our commercial success depends in part on the extent to which governmental authorities, private health insurers and other third-party payors provide coverage for and establish adequate reimbursement levels for the procedures in which our products are used. Failure by physicians, hospitals, ambulatory surgery centers and other users of our products to obtain coverage and adequate reimbursement from third-party payors for procedures in which our products are used, or adverse changes in government and private third-party payors’ coverage and reimbursement policies, may adversely impact demand for our products.

23

Based on our experience to date, third-party payors generally reimburse for the procedures in which our products are used only if the patient meets the established medical necessity criteria for the procedure. Some payors are moving toward a managed care system and control their healthcare costs by establishing coverage policies that categorically restrict coverage of certain procedures, or by limiting authorization for procedures, including elective procedures using our devices. No uniform policy of coverage and reimbursement among payors in the United States exists, and coverage and reimbursement for procedures can differ significantly from payor to payor. Third-party payors are increasingly auditing and challenging the prices charged for medical products and services with concern for upcoding, miscoding, using inappropriate modifiers, or billing for inappropriate care settings. Some third-party payors must approve coverage for new or innovative devices or procedures before they will reimburse healthcare providers who use the products or therapies. Even though a new product may have been cleared for commercial distribution by the FDA, we may find limited demand for our product unless reimbursement approval can be obtained and/or maintained from governmental and private third-party payors.

In addition to uncertainties surrounding coverage policies, there are periodic changes to reimbursement levels. Third-party payors regularly update reimbursement amounts and also from time to time revise the methodologies used to determine reimbursement amounts. This includes routine updates to payments to physicians, hospitals and ambulatory surgery centers for procedures during which our products are used. These updates could directly impact the demand for our products.

We believe the overall escalating cost of medical products and services being paid for by the government and private health insurance has led to, and will continue to lead to, increased pressures on the healthcare and medical device industry to reduce the costs of products and services. Third-party payors are developing increasingly sophisticated methods of controlling healthcare costs through prospective reimbursement and capitation programs, group purchasing, redesign of benefits, and exploration of more cost-effective methods of delivering healthcare. In the United States, some insured individuals enroll in managed care programs, which monitor and often require pre-approval of the services that a member will receive. Some managed care programs pay their providers on a per capita (patient) basis, which puts the providers at financial risk for the services provided to their patients by paying these providers a predetermined payment per member per month and, consequently, may limit the willingness of these providers to use our products.

Healthcare Reform

The United States and some foreign jurisdictions are considering or have enacted a number of legislative and regulatory proposals to change the healthcare system in ways that could affect our ability to sell our products profitably. Among policy makers and payors in the United States and elsewhere, there is significant interest in promoting changes in healthcare systems with the stated goals of containing healthcare costs, improving quality or expanding access. Current and future legislative proposals to further reform healthcare or reduce healthcare costs may limit coverage of or lower reimbursement for the procedures associated with the use of our products. The cost containment measures that payors and providers are instituting and the effect of any healthcare reform initiative implemented in the future could impact our revenue from the sale of our products.

The implementation of the Affordable Care Act ("ACA") in the United States, for example, has changed healthcare financing and delivery by both governmental and private insurers substantially, and affected medical device manufacturers significantly. The ACA, among other things, provided incentives to programs that increase the federal government’s comparative effectiveness research, and implemented payment system reforms including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models. Additionally, the ACA expanded eligibility criteria for Medicaid programs and created a new Patient-Centered Outcomes Research Institute to oversee, identify priorities in, and conduct comparative clinical effectiveness research, along with funding for such research. Since its enactment, there have been judicial, executive and political challenges to certain aspects of the ACA. On June 17, 2021, the U.S. Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of the ACA. It is unclear how healthcare reform measures of the Biden administration or other efforts, if any, to challenge, repeal or replace the ACA will impact the law or our business.

In addition, the American Taxpayer Relief Act of 2012, among other things, further reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. The Medicare Access and CHIP Reauthorization Act of 2015 repealed

24

the formula by which Medicare made annual payment adjustments to physicians and replaced the former formula with fixed annual updates and a new system of incentive payments that began in 2019 that are based on various performance measures and physicians’ participation in alternative payment models, such as accountable care organizations.

We expect additional state, federal, and foreign healthcare reform measures to be adopted in the future, any of which could limit the amounts that federal, state, and foreign governments will pay for healthcare products and services, which could result in reduced demand for our products or additional pricing pressure.

Data Privacy and Security Laws

Numerous state, federal and foreign laws, including consumer protection laws and regulations, govern the collection, dissemination, use, access to, confidentiality and security of personal information, including health- related information. In the United States, numerous federal and state laws and regulations, including data breach notification laws, health information privacy and security laws, including HIPAA, and federal and state consumer protection laws and regulations (e.g., Section 5 of the FTC Act), that govern the collection, use, disclosure, and protection of health-related and other personal information could apply to our operations or the operations of our partners. In addition, certain state and non-U.S. laws, such as the California Consumer Privacy Act ("CCPA"), the California Privacy Rights Act ("CPRA") and the General Data Protection Regulation ("GDPR"), govern the privacy and security of personal information, including health-related information in certain circumstances, some of which are more stringent than HIPAA and many of which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Failure to comply with these laws, where applicable, can result in the imposition of significant civil and/or criminal penalties and private litigation. Privacy and security laws, regulations, and other obligations are constantly evolving, may conflict with each other to complicate compliance efforts, and can result in investigations, proceedings, or actions that lead to significant civil and/or criminal penalties and restrictions on data processing.

In Europe, the GDPR went into effect on May 25, 2018 and introduces strict requirements for processing the personal data of European Union data subjects. Companies that must comply with the GDPR face increased compliance obligations and risk, including more robust regulatory enforcement of data protection requirements and potential fines for noncompliance. Among other requirements, the GDPR regulates transfers of personal data subject to the GDPR to third countries that have not been found to provide adequate protection to such personal data, including the United States, and the efficacy and longevity of current transfer mechanisms between the EU and the United States remains uncertain.

Further, from January 1, 2021, companies have to comply with the GDPR and also the United Kingdom General Data Protection Regulation ("UK GDPR"), which, together with the amended UK Data Protection Act 2018, retains the GDPR in UK national law. The relationship between the United Kingdom and the European Union in relation to certain aspects of data protection law remains unclear, and it is also unclear how United Kingdom data protection laws and regulations will develop, and how data transfers to and from the United Kingdom will be regulated.

Human Capital

As of December 31, 2022, we had 250 full-time employees. Our highly qualified and experienced team includes scientists, physicians and professionals across sales, marketing, regulatory, finance and other important functions that are critical to our success. We believe that the success of our business will depend, in part, on our ability to attract and retain qualified personnel. None of our employees are represented by a labor union or are a party to a collective bargaining agreement and we believe that we have good relations with our employees.

We believe that our continued success is reliant on the ability to attract, develop and retain top talent. To facilitate talent attraction and retention, we strive to foster an inclusive and safe workplace, with opportunities for our employees to grow and develop in their careers, supported by competitive compensation and benefits programs. In the attraction, development and retention of talent, we emphasize:

Compensation and Benefits. We strive to provide competitive compensation and benefits programs to attract and retain top talent and review these programs annually against the competitive landscape to ensure they continue to meet the needs of our employees. In addition to salaries, these programs include a variety of short and long-term incentive plans such as annual bonuses, equity awards, an Employee Stock Purchase Plan, a 401(k) Plan, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, family care resources, flexible work schedules,

25

and employee assistance programs. In addition to our broad-based equity award programs, we have used targeted equity-based grants with vesting conditions to facilitate the retention and engagement of our talent.

Talent Development. We believe employees are our greatest asset and we strive to provide development and promotional opportunities in order to help our employees reach their potential. We provide formal and informal training opportunities designed to enhance learning and development. Consistent with our performance review processes, we foster and encourage continuous manager and employee dialogue around performance and development.

Health, Safety and Wellness. We are committed to the health, safety and wellness of our employees. We provide our employees and their families with access to a variety of flexible and convenient health and wellness programs, including benefits that provide protection and security so they can have peace of mind concerning events that may require time away from work or that impact their financial well-being; that support their physical and mental health by providing tools and resources to help them improve or maintain their health status and encourage engagement in healthy behaviors.

Diversity, Equity, and Inclusion. One of our core values is diversity of thought, values, individual characteristics, beliefs and backgrounds. We are an equal opportunity employer and believe that diverse and differentiated views contribute to make us a better organization. It is our conscious effort to support the advancement of women and promote equal opportunity for all our employees within the workplace.

Additional Information

Sight Sciences, Inc. was incorporated as a Delaware corporation on February 10, 2010. We maintain a website at www.sightsciences.com. At our Investor Relations website, investors.sightsciences.com, we make available free of charge information for investors, including our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports, as soon as reasonably practicable after we electronically file that material with or furnish it to the Securities and Exchange Commission (the "SEC"). The information found on our website is not part of this or any other report we file with, or furnish to, the SEC, and references to our website address are inactive textual references only.

26

Item 1A. Risk Factors.

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including the section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our condensed consolidated financial statements and the accompanying notes thereto included elsewhere in this Annual Report on Form 10-K, before investing in our common stock. The risks and uncertainties described below are not the only ones we face. Additional risk and uncertainties that we are unaware of or that we deem immaterial may also become important factors that adversely affect our business. The realization of any of these risks and uncertainties could have a material adverse effect on our reputation, business, financial condition, results of operations, growth and future prospects, as well as our ability to accomplish our strategic objectives. In that event, the market price of our common stock could decline and you could lose part or all of your investment.

Risks Related to Our Business

We are an early-stage company with a history of significant losses, we expect to incur losses in the future and we may not be able to achieve or sustain profitability.

We have incurred annual net losses since our formation in 2010. For the years ended December 31, 2022 and 2021, we had net losses of $86.2 million and $63.0 million, respectively. As of December 31, 2022, we had an accumulated a deficit of $239.2 million. To date, we have financed our operations primarily through equity and debt financings and from sales of our products, OMNI, a device that enables canaloplasty followed by trabeculotomy for the reduction of intraocular pressure in adult patients with POAG, and TearCare, which is indicated for the application of localized heat therapy in adult patients with DED due to MGD, when used in conjunction with manual expression of the meibomian glands. Starting in the second half of 2022, we commenced sales of SION, a manually operated device indicated for use in ophthalmic surgical procedures to excise trabecular meshwork. The losses and accumulated deficit have primarily been due to the substantial investments we have made to develop our products, costs related to our sales and marketing efforts, general research and development expenses, including costs related to clinical trials and regulatory initiatives to obtain marketing clearance, and infrastructure improvements. In addition, as a public company, we incur significant legal, accounting and other expenses that we did not incur as a private company.

Accordingly, we expect to continue to incur losses for the foreseeable future and we cannot assure you that we will ever achieve profitability or that, if we do become profitable, we will sustain profitability. Our failure to achieve and sustain profitability in the future would make it more difficult to finance our business and accomplish our strategic objectives, which would have a material adverse effect on our business, financial condition and results of operations. In addition, failure of our products to significantly penetrate our target markets would negatively affect our business, financial condition and results of operations.

We are highly dependent on revenue from the sales of our products, and our inability to successfully execute our growth strategy could negatively affect our results of operations and financial condition.

We began selling VISCO360 and TRAB360, commercial predicate devices to OMNI, in 2015, TearCare in 2019 and SION in the second half of 2022, and therefore do not have a long history operating as a commercial company. Currently, we are highly dependent on the success of OMNI and SION, which comprise our Surgical Glaucoma products, and TearCare, and we expect substantially all of our product revenues in at least the next 12 months to be derived from these products. We are particularly dependent on the success of OMNI, which accounted for 89% of our total revenues for the year ended December 31, 2022. Because we devote substantially all of our resources to these products and rely on them as our sole source of revenue, any factors that negatively impact our products, and particularly OMNI, or result in a decrease in sales, could have a material adverse effect on our business, financial condition and results of operations.

Over the next several years, we expect to continue to devote substantial resources to expand our commercialization efforts, drive increased adoption of our products and continue to develop new and improved products. Our limited commercialization experience and number of products make it difficult to evaluate our current business and predict our future prospects. For example, we believe that OMNI can be used as a Standalone procedure to help effectively reduce IOP in adult POAG patients, but we have limited commercial experience with this Standalone market segment, and the extent to which we are able to penetrate and grow this market is unknown. In addition, a number of factors, including some outside of our control, may render our products economically impracticable or obsolete and contribute to fluctuations in our financial results, including:

27

Our business is dependent upon the broad adoption of our products by eyecare professionals and patients.

ECPs, including ophthalmologists and optometrists, have limited awareness of, and experience with, our products and brand. Our future growth and profitability largely depend on our ability to increase ECP and patient awareness of our products and on the willingness of ECPs and patients to adopt our products. ECPs may not adopt our products unless they believe they will receive appropriate compensation for such use and are able to determine, based on experience, clinical data, medical society and association recommendations and other analyses, that our products are clinically differentiated from, or otherwise preferable to, available alternatives. Even if we are able to raise awareness among ECPs, they may be slow to change their medical treatment practices and may be hesitant to select our products for a variety of reasons, including:

28

To effectively market and sell our products, we will need to continue to educate the medical community about the safety, efficacy, necessity and efficiency of our products and about the patient populations that would potentially benefit from the use of our products. For example, if first-line ECPs or primary care physicians that serve as the early point of contact for patients are not made aware of our OMNI products, they may not refer patients to ECPs who utilize our products, and those patients may be treated with alternative procedures or treatments. In addition, some physicians may choose to utilize our products on only a subset of their total patient population or may not adopt our products at all. Further, if we are unable to obtain or maintain favorable third-party reimbursement coverage of procedures in which our products are used, particularly as compared to competitive products, adoption of our products by ECPs and patients will suffer. We cannot assure you that our products will achieve broad market acceptance among payors, physicians and patients. Any failure of our products to satisfy demand or to achieve meaningful market acceptance and penetration will harm our future prospects and have a material adverse effect on our business, financial condition and results of operations.

We may not be able to incrementally secure or maintain adequate levels of third-party coverage and reimbursement for procedures in which our Surgical Glaucoma products are used, and third parties may rescind or modify their coverage or delay payments related to these products. We may not be able to incrementally secure any, or adequate levels of, third-party coverage and reimbursement for procedures in which TearCare is used, and even if third parties provide coverage they may rescind or modify their coverage or delay payments related to TearCare.

We derive revenue from sales of OMNI and SION to physicians, ambulatory surgery centers and hospital outpatient departments, which typically bill all or a portion of the costs and fees associated with our products to various third-party payors, including Medicare, Medicaid, private commercial insurance companies, health maintenance organizations and other healthcare-related organizations, and then bill patients for any applicable deductibles or co-payments. Internationally, medical reimbursement systems vary significantly from country to country, with some countries limiting medical centers’ spending through fixed budgets, regardless of levels of patient treatment, and other countries requiring application for, and approval of, government or third-party reimbursement. As a result, access to adequate coverage and reimbursement for procedures in which our Surgical Glaucoma products are used by third-party payors is essential to their acceptance and adoption by patients and ECPs.

We also derive revenue from sales of TearCare to ECPs and eye care clinics, which bill all or a portion of the costs and fees associated with treatments and products to patients or, on a limited basis, to third-party payors. We believe that access to adequate coverage and reimbursement for procedures in which TearCare is used by third-party payors is important to the broad acceptance and adoption of TearCare. Currently, no MACs have formal policies establishing coverage for the TearCare procedure; however, MACs from time to time may include, and we are currently aware of three MACs that have included, low payment rates for TearCare procedures in their fee schedules that, if not removed or increased to what we believe is an appropriate reimbursement level, could adversely impact our efforts to achieve reimbursement for TearCare that is sufficient to support its broad commercial growth and adoption. Further, commercial payers may from time to time make “no coverage” or similar determinations with respect to our TearCare product that could hamper our efforts to drive broad commercial adoption of TearCare. We are pursuing a comprehensive long-term market development and patient access plan for TearCare and focusing our efforts on partnering with key strategic accounts to pursue prior authorization approvals and reimbursement claims for procedures in which TearCare is used, but there is no guarantee that we will be successful. If patients are not willing to pay for procedures in which TearCare is used, or if third-party payors continue to refuse to provide coverage and reimbursement, or provide insufficient levels of coverage and reimbursement, it could have a negative impact on ECPs’ adoption of TearCare and sales of TearCare.

Third-party payors, whether foreign or domestic, or governmental or commercial, are developing increasingly sophisticated methods of controlling healthcare costs. In addition, no uniform policy of coverage and reimbursement for procedures using our products exists among third-party payors. Therefore, coverage and reimbursement for procedures using our products can differ significantly from payor to payor. Obtaining and maintaining coverage and reimbursement can be a time-consuming process that could require us to provide supporting scientific, clinical and cost-effectiveness data for the use of our products. We may not be able to provide data sufficient to satisfy governmental and third-party payors that procedures using our products should be covered and reimbursed. With regard to our international sales efforts, even if and as we succeed in bringing our products to market in foreign countries, uncertainties regarding future healthcare policy, legislation and regulation, as well as private market practices, could affect our ability to sell our products in commercially acceptable quantities at acceptable prices.

29

In the United States, the AMA generally assigns specific billing codes for procedures under a coding system known as Current Procedure Terminology, or CPT, which surgeons use to bill third-party payors and receive reimbursement. Once a permanent CPT code ("Category I CPT code") is established for a service, CMS establishes payment levels under Medicare, while other payors may establish rates and coverage rules independently. Canaloplasty followed by trabeculotomy procedures using OMNI are typically billed using the Category I CPT code 66174, which describes canaloplasty. Coding for ophthalmic surgical procedures is complex, and changes to the codes used to report services performed with our products may result in significant changes in reimbursement, which could negatively impact our revenue. For example, in 2021 the RVS Update Committee ("RUC") of the AMA reevaluated the physician work associated with CPT code 66174. As a result of this RUC review, CMS reduced the Medicare Physician Fee Schedule amount associated with this service from approximately $950 in 2021 to $761 in 2022 and approximately $622 in 2023.

The AMA maintains a subset of temporary CPT codes ("Category III CPT codes") used for new and emerging technologies. For example, TearCare was assigned a Category III CPT code effective beginning January 1, 2020. Coverage for Category III CPT codes is often limited. Medicare does not generally establish national payment rates for Category III CPT codes on the Medicare Physician Fee Schedule ("MPFS"). As a result, individual Medicare contractors and private payors may establish their own payment rates for services described by Category III CPT codes, as has been the case with TearCare, which payment rates are subject to change, may be variable across Medicare contractors, may be materially below the final reimbursement rates that we are currently targeting, or may determine not to reimburse services described by Category III CPT codes.

Payors also continually review new and existing technologies for possible coverage and can deny or reverse coverage for new or existing products and procedures. There can be no assurance that third-party payor policies provide coverage, or will continue to provide coverage, for procedures in which OMNI is used. If coverage policies change such that Medicare no longer covers procedures in which our products are used, there would be a material adverse effect on our business, financial condition and results of operations. For example, MACs could issue local coverage determinations that could restrict the patients eligible for treatment with our products or that are otherwise unfavorable to our business. If we are not successful in reversing any proposed non-coverage policies, or if third-party payors that currently cover or reimburse procedures in which our products are used reverse or limit their coverage in the future, or if other third-party payors issue similar policies, this could have a material adverse effect on our business.

Further, we believe that future coverage and reimbursement may be subject to increased restrictions, such as additional prior authorization requirements, both in the United States and in international markets. Third-party coverage and reimbursement for procedures using our products or any of our products in development for which we may receive regulatory clearance, certification or approval may not be available or adequate in either the United States or international markets. Further, other devices or treatments that compete with our products may be more widely covered or subject to different co-pay policies and requirements, which could impact demand for our products. If hospital, surgical center, ECP and/or patient demand for our products is adversely affected by third-party reimbursement policies and decisions, it could have a material adverse effect on our business, financial condition and results of operations.

Adoption of our products depends upon appropriate physician training, practice and patient selection.

The success of our products depends in part on the skill of the ECPs utilizing and administering products to treat patients and on their adherence to our stated patient selection criteria and the proper techniques that we provide in training sessions. We train ECPs on the correct use of OMNI and SION. However, ECPs rely on their previous medical training and experience when performing ophthalmic surgical procedures and may deviate from the techniques we provide in training sessions. Furthermore, we cannot guarantee that all such ECPs who use OMNI and SION will have the necessary skills or experience to safely and effectively perform these procedures. Similarly, though we train ECPs to ensure correct use of TearCare, including placement of SmartLids on patients’ eyelids and expression of the patients' meibomian glands, we cannot guarantee that all such ECPs will have the necessary skills or experience to safely and effectively use these devices. If ECPs utilize our products in a manner that is inconsistent with our labeled indications or with components that are not part of our products, the patient outcomes may be negative. This could negatively impact the perception of patient benefits and safety associated with our products and limit their adoption, which would have a material adverse effect on our business, financial condition and results of operations.

30

Development of our products for expanded indications depends upon positive clinical data, and the safety and efficacy of our products for the intended uses for which we intend to seek clearance, certification or approval are not yet supported by long-term clinical data, which could delay or prevent clearance by the FDA (or other foreign authorities or notified bodies) or limit sales if cleared, certified or approved and our products might therefore prove to be less safe or effective than initially thought.

We are conducting and intend to continue conducting additional clinical trials or investigations to develop our devices for expanded indications. Historical clinical results, including interim results, are not necessarily predictive of future clinical results, and we cannot assure you that the results reported in these studies will be consistent with, or better than, currently available clinical data. Moreover, the outcomes and updates resulting from these studies, including interim results, may be compared to the results of other products and treatments for these same patient populations, and if the comparisons are not favorable, it may limit the ability to obtain clearance, certification or approval of the devices for the expanded indications for which we intend to seek clearance, certification or approval, as well as adoption of our products for their current authorized uses. In addition, our competitors and other third parties may also conduct clinical trials or investigations of our products without our participation. Unfavorable or inconsistent clinical data from existing or future clinical trials or investigations conducted by us, our competitors or other third parties, the interpretation of our clinical data or findings of new or more frequent adverse events, could subject us to mandatory or voluntary product recalls, suspension or withdrawal of FDA or other clearance, certification or approval, significant legal liability or harm to our business reputation and could have a material adverse effect on our business, financial condition and results of operations.

Our products will be adopted and compete, in part, based on long-term data regarding patient outcomes and the risk of our products relative to other treatment options. The long-term clinical outcomes of the use of our products for their cleared uses are not known and, due to the novelty of our products, there is no long-term data regarding patient outcomes beyond our clinical trials or investigations. The results of short-term clinical experience of our products do not necessarily predict long-term clinical outcomes. We believe that ECPs will compare the rates of long-term clinical outcomes for procedures using our products for their authorized uses against alternative procedures and treatment options. If the long-term data does not meet ECPs’ expectations, or if the long-term data indicates that our products are not as safe or effective as other treatment options or as current short-term data would suggest, physicians may recommend alternative treatments for their patients and our products may not become widely adopted, which will negatively affect our business, financial condition and results of operations.

Uncertainty in current global economic and political conditions could adversely affect our ability to predict product demand and impact our financial results, and makes it more likely that our actual results could differ materially from expectations.

Our operations and performance depend in part on worldwide economic and political conditions. Certain of the jurisdictions in which our products are sold have experienced and could continue to experience unfavorable general economic conditions, such as a recession or economic slowdown, including as a result of political instability and military hostilities in certain geographies, concerns over the potential downgrade of U.S. sovereign debt and continued sovereign debt, monetary and financial uncertainties in Europe and other geographies, and domestic and global inflationary trends, any of which could negatively affect the affordability of, and consumer demand for, our products. Under difficult economic conditions, consumers may seek to modify spending priorities and reduce discretionary spending by delaying purchases of our products, which could reduce our profitability and could negatively affect our overall financial performance. Other financial uncertainties in our major markets and unstable political conditions in certain markets, including civil unrest and governmental changes, could undermine global consumer confidence and reduce consumers’ purchasing power, thereby reducing demand for our products. We cannot predict the reoccurrence of any economic slowdown or the strength or sustainability of the economic recovery, worldwide, in the United States, or in our industry. These and other economic factors could have a material adverse effect on our business, financial condition, and results of operations.

The safety and efficacy of some of our products is not yet supported by long-term clinical data, which could limit sales, and our products might therefore prove to be less safe or effective than initially thought.

The products that we market in the United States are regulated as medical devices by the FDA. OMNI and TearCare have received premarket clearance under Section 510(k) of the FDCA. In the 510(k) clearance process, before a device may be marketed the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (pre-amendments device), a device that was originally on the U.S. market pursuant to an approved PMA application and later down-classified, or a 510(k)-exempt device. This process is typically shorter and

31

generally requires the submission of less supporting documentation than the FDA’s PMA process and does not always require long-term clinical studies. SION is registered with the FDA as a Class I 510(k) exempt device.

In the EEA Union, a single regulatory approval process exists, and conformity with its requirements is required to affix a CE mark to our medical devices, without which they cannot be marketed or sold in the EEA. We received CE marking for OMNI in 2017. To obtain a CE mark, defined products must meet minimum standards of performance, safety, and quality, and then, according to their classification, undergo a conformity assessment procedure. Except for low risk medical devices, a conformity assessment procedure requires the intervention of a third-party organization designated by the competent authorities of an EEA country, known as a Notified Body. The competent authorities of the EU countries separately regulate the clinical research for medical devices and the market surveillance of products once they are placed on the market. A new regulation, the EU MDR was published by the EU in 2017 and became effective on May 26, 2021. Medical devices marketed in the EEA will require certification according to these new requirements. The EU MDR includes significant additional premarket and post-market requirements, and manufacturers of medical devices are required by the EU MDR to collect post-marketing clinical data in relation to their CE marked medical devices. Post-market surveillance includes the conduct of post-market clinical follow-up studies permitting manufacturers to gather information concerning quality, safety or performance of medical devices after they have been placed on the market in the EU. All information collected as part of the post-market surveillance process must be reviewed, investigated and analyzed on a regular basis in order to determine whether trending conclusions can be made concerning the safety or performance of the medical device and decisions must be taken in relation to the continued marketing of medical devices currently on the market. We expect to incur ongoing costs to comply with these post-market clinical obligations in EU markets for so long as we continue to market and sell products in those markets, as well as in the EEA markets.

We are conducting and intend to continue conducting additional clinical trials, including clinical trials to develop TearCare for expanded indications. In addition, our competitors and other third parties may conduct clinical trials of our products without our participation. If future patient studies or clinical testing do not support our belief that our products are advantageous for their intended uses, market acceptance of our products could fail to increase or could decrease and our business could be harmed. Moreover, if future results and experience by us, our competitors or other third parties, indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to mandatory or voluntary product recalls, suspension or withdrawal of FDA, European Commission or other governmental clearance or approval or certifications, significant legal liability or harm to our business reputation, which could have a material adverse effect on our business, financial condition and results of operations.

We believe that ECPs will compare the rates of long-term clinical outcomes for procedures using our products for their authorized uses against alternative procedures and treatment options. If we choose to, or are required to, conduct additional studies, equivocal or unfavorable results from such studies or experience could lead to a reduction in the rate of coverage and reimbursement by both public and private third-party payors for procedures that are performed with our products, slow market adoption of our products by ECPs, significantly reduce our ability to achieve expected revenues and prevent us from being profitable.

We have limited experience in training on, and marketing and selling, our products and we may provide inadequate training, fail to increase our sales and marketing capabilities or fail to develop broad brand awareness in a cost-effective manner.

We have limited experience marketing and selling our products. In the United States, we currently rely on our direct sales force and any failure to maintain and grow our sales force could harm our business. In Europe, we currently rely on a combination of direct sales personnel and independent distributors to sell our OMNI product, and we intend to grow our international sales through a combination of direct and distributor sales. In order to generate future growth, we plan to continue to significantly expand and leverage our commercial infrastructure to increase our customer base and increase adoption by existing customers to drive our growth. Identifying and recruiting qualified sales and marketing professionals and training them on our products, on applicable federal and state laws and regulations and on our internal policies and procedures requires significant time, expense and attention. Our direct sales force may subject us to higher fixed costs than those of companies with competing products or treatments that rely more heavily on independent third parties, placing us at a competitive disadvantage. Our business may be harmed if our efforts to expand and train our sales force and distribution chain do not generate a corresponding increase in product sales and revenue, and our higher fixed costs may slow our ability to reduce costs in the face of a sudden decline in demand for our products. Any failure to hire, develop and retain effective sales personnel, to identify and train distributors and independent sales representatives in targeted international

32

territories, to achieve desired productivity levels in a reasonable period of time or timely reduce fixed costs, could have a material adverse effect on our business, financial condition and results of operations.

Our ability to increase our customer base and achieve broader market acceptance of our products will depend, to a significant extent, on our ability to expand our sales and marketing and educational efforts. We plan to dedicate significant resources to our sales and marketing initiatives, and educational programs through leading medical publications and at large industry and scientific meetings, both directly and through key opinion leaders. Our business may be harmed if these efforts and expenditures do not generate a corresponding increase in revenue. In addition, we believe that developing and maintaining broad awareness of our brand in a cost-effective manner is critical to achieving broad acceptance of our products and reaching new ECPs and patients. Brand promotion activities may not impact ECP or patient awareness or increase revenue, and even if they do, any increase in revenue may not offset the costs and expenses we incur in building our brand. If we fail to successfully promote, maintain and protect our brand, we may fail to attract or retain the market acceptance necessary to realize a sufficient return on our brand building efforts, or to achieve the level of brand awareness that is an important factor for the broad adoption of our products.

Our products are designed to be used in a limited number of procedures, and there is a limited total addressable market for our products. The sizes of the potential and actual markets for our current products have not been established with precision and may be smaller than we estimate.

We currently market our OMNI device for use in the U.S. and select European geographies for canaloplasty followed by trabeculotomy to reduce intraocular pressure in adult patients with POAG. POAG is the most prevalent form of glaucoma and affects approximately 4.1 million people in the United States and over 60 million people worldwide. We currently market TearCare in the United States for the application of localized heat therapy in adult patients with evaporative DED due to MGD, when used in conjunction with manual expression of the meibomian glands. There are an estimated 739 million people globally and 38 million people in the U.S. who suffer from DED. DED is the most common reason for a patient visit to an eye doctor, yet of the estimated 38 million people with DED in the U.S., only approximately 17 million have been diagnosed with DED. Studies have shown that evaporative DED resulting from MGD is associated with approximately 86% of all DED cases. We currently market our SION surgical instrument in the United States for use in ophthalmic surgical procedures to excise trabecular meshwork.

The total addressable markets for our products are subject to change and may be limited by various factors, including FDA or other regulatory restrictions or more narrowly defined indications, ECP practice preferences, and governmental and private payer reimbursement practices, any of which could have a material adverse effect on our business, financial condition and results of operations.

Further, our estimates of the total addressable markets for our products are based on a number of internal and third-party assumptions and estimates, including, without limitation, the number of patients with POAG and MGD, and the assumed prices at which we can sell our products in markets that have not yet been fully established. While we believe our assumptions and the data underlying our estimates are reasonable, these assumptions and estimates may not be correct and the conditions supporting our assumptions or estimates may change at any time, thereby reducing the predictive accuracy of these underlying factors. As a result, our estimates of the annual total addressable market for our current products may prove to be incorrect. If the actual number of patients who would benefit from our products or the price at which we can sell our products is smaller than we have estimated, it may impair our sales growth and negatively affect our business, financial condition and results of operations.

Epidemic diseases, or the perception of their effects, have and may have an adverse effect on our business, financial condition, results of operations, and cash flows.

Outbreaks of infectious diseases, such as COVID-19, could divert medical resources and priorities towards the treatment of that disease. An outbreak of an infectious disease, or renewed escalation of the COVID-19 pandemic, could also negatively affect the decision by ECPs to perform (and by patients to undergo) elective surgery or office-based procedures, which could decrease demand for procedures using our products and cause other disruptions to our business. Business disruptions could include disruptions or restrictions on our ability to travel or to distribute our products, government orders suspending the performance of elective surgical procedures, inability of our customers to meet their financial commitments due to strain on the healthcare system, as well as temporary closures of our facilities or the facilities of our suppliers and their contract manufacturers, and a reduction in the business hours of ambulatory surgery centers and optometrists’ offices. Any disruption of our suppliers and their contract manufacturers or our customers would likely

33

impact our sales and operating results. In addition, a significant outbreak of an infectious disease in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn that could affect demand for our products. Any of these events could negatively impact the number of procedures using our implants that are performed and have a material adverse effect on our business, financial condition, results of operations, or cash flows.

Since its onset, COVID-19 has had an adverse impact on our operations as a result of preventive and precautionary measures that we, other businesses, health systems and governments have taken. Although we experienced this adverse impact most acutely in the second quarter of 2020, we continued to experience COVID-related disruptions to our normal business operations through early 2022. For example, the COVID-19 pandemic has resulted in, and may continue to result in, significant disruption of global financial markets, reducing our ability to access capital, which could in the future negatively affect our liquidity. In addition, a recession or market correction resulting from the spread of an infectious disease, including COVID-19, could materially affect our business. Such economic recession could have a material adverse effect on our long-term business as hospitals, surgical centers and optometry offices curtail and reduce capital and overall spending. If patients are unable to obtain or maintain health insurance policies or experience decreases in their income, this may significantly impact their ability to pay for the procedures utilizing our products, which could further negatively impact our business, financial condition and results of operations.

The market for our products is highly competitive. Our competitors may have longer operating histories, more established products and greater resources than we do, and may be able to develop or market treatments that are safer, more effective or gain greater acceptance in the marketplace than our products.

The medical device industry is highly competitive, subject to rapid change and significantly affected by the introduction of new products and technologies and the other activities of industry participants. We compete, or plan to compete, with medical device and pharmaceutical companies that develop and commercialize products for eye conditions, including Glaukos, Ivantis, AbbVie/Allergan, Novartis, Alcon, Johnson & Johnson, and New World Medical. These companies, or other entrants into the market, may have or develop competing technologies, other products that are in or that enter clinical trials, new devices or additional indications for existing devices that could demonstrate better safety, effectiveness, clinical results, lower costs or greater ECP and market acceptance than our products. For example, despite what we believe to be the strong safety profile of our products for their intended uses, patients may experience adverse events following canaloplasty or trabeculotomy with OMNI, including, but not limited to, hyphema, mild anterior chamber inflammation and spikes in intraocular pressure. Similarly, patients may experience adverse events following use of the SION surgical instrument, including anterior chamber shallowing and prolonged, or persistent intraocular inflammation, or application of localized heat with TearCare, including discomfort, pain or erythema of the eyelids. Any failure to meet patient expectations and any resulting negative publicity could harm our reputation and future sales and therefore adversely affect our business, financial condition and results of operations.

We compete, or may compete in the future, against other companies which have longer, more established operating histories and significantly greater financial, technical, marketing, sales, distribution and other resources, which may prevent us from achieving significant market penetration or improved operating results. These companies may enjoy several competitive advantages, including:

34

One of the major hurdles to adoption of our products will be overcoming established treatment patterns, which will require educating ECPs and supportive clinical data. However, because of the size of the market opportunity for devices used in procedures to address MIGS and MGD, we believe current and potential future competitors will dedicate significant resources to aggressively promote their products or develop new products or treatments, such as Glaukos’ iStent infinite and iPRIME Viscodelivery System. Further, new treatment options may be developed that could compete more effectively with our products due to the prevalence of glaucoma and MGD, and the research and technological progress that exist within the market. Also, even if competitor products do not have indications for use or clinical data that are comparable to ours, ECPs can still choose these competitor products for a variety of reasons, including those set forth above. For instance, competitors may seek to bundle their products in a manner that is attractive to ECPs, which may result in decreased use or adoption of our products by ECPs, notwithstanding that our products may offer superior efficacy.

We rely on third parties to manufacture and supply our products, many of which are single-source providers, and we are subject to numerous risks relating to our reliance on third parties.

Our business strategy depends on our ability to manufacture our current and future products in sufficient quantities and on a timely basis to meet customer demand, while adhering to product quality standards, complying with regulatory quality system requirements and managing manufacturing costs. We do not have any internal manufacturing capabilities or infrastructure and rely on a limited number of third-party manufacturers, many of which are single source suppliers, for a portion of the components, accessories, materials and assembly that we utilize in our products. These items are critical and, for certain items, there are relatively few or no readily available alternative sources of supply. These single source suppliers may be unwilling or unable to supply these items reliably and at the levels we anticipate or that are required by the market. For example, following the transition of our OMNI production in 2022, our OMNI products are now primarily produced and assembled by a single Taiwan-based manufacturer in China. However, we have also contracted with a U.S.-based manufacturer to produce and assemble OMNI products. We also have supply arrangements with several Chinese and U.S. medical device manufacturers for the production of our SION and TearCare products. For our business strategy to be successful, our suppliers must be able to provide us with products in sufficient quantities, in compliance with regulatory requirements, including the FDA’s QSR or other applicable laws or regulations enforced by the FDA, state and foreign regulatory authorities, in accordance with agreed-upon specifications, at acceptable costs and on a timely basis.

While our suppliers have generally met our demand requirements on a timely basis in the past, their ability and willingness to continue to do so going forward may be limited for several reasons, including financial difficulties, damage to their manufacturing equipment or facilities, inability to obtain components, problems with their own suppliers, our relative importance as a customer to each manufacturer, or geopolitical or trade tensions between China and Taiwan or China and the United States. If we are unable to meet our demand requirements on a timely basis, we may not have a sufficient number of our products available for delivery to support ECPs that utilize our products as part of their treatment. For instance, if our supply of OMNI products from our manufacturer in China was interrupted or suspended for any significant period, we may be unable to meet customer demand for our products during that time. Any shortfall in the supply of products may result in lower adoption and usage rates of our products and have a material adverse effect on our business, financial condition and results of operations.

The process of identifying and qualifying alternative manufacturing facilities for any other reason could be time-consuming and expensive, may result in interruptions in our operations and product delivery, and could affect the performance specifications of our products. We cannot assure you that we will be able to identify and engage alternative contract manufacturers on terms similar to our current arrangements, or without delay. Furthermore, our contract manufacturers could require that their manufacture and assembly of our products be moved to another of their production facilities. The occurrence of any of these events could harm our ability to meet the demand for our products in a timely and cost-effective manner, which could have a material adverse effect on our business, financial condition and results of operations.

We are also subject to numerous other risks relating to our reliance on third parties, including our potential inability to renew or extend contracts and arrangements with such third parties or renew any such contracts or arrangements on terms that are favorable to us, and price fluctuations due to a lack of long-term supply agreements with certain of our suppliers.

35

These risks are likely to be exacerbated by our limited experience with our current products and manufacturing processes. As demand for our products increases, we will have to invest additional resources to manage the manufacturing process. If we fail to secure increased production capacity efficiently, we may not be able to fill customer orders on a timely basis, our sales may not increase in line with our expectations and our operating margins could fluctuate or decline. In addition, the manufacture of future products may require modification of the current production processes or unique production processes, the identification of new suppliers for specific components, sub-assemblies and materials or the development of new manufacturing technologies. It may not be possible for our current third-party manufacturers to produce these products at a cost or in quantities sufficient to make these products commercially viable or to maintain current operating margins, all of which could have a material adverse effect on our business, financial condition and results of operations.

Our results of operations could be materially harmed if we are unable to accurately forecast customer demand for our products and manage our inventory.

While we seek to maintain sufficient levels of inventory in order to protect ourselves from supply interruptions, we keep limited components, sub-assemblies, materials and finished products on hand. To ensure adequate inventory supply and manage our operations with our third-party suppliers, we forecast anticipated materials requirements and demand for our products in order to predict inventory needs and then place orders with our suppliers based on these predictions. Our ability to accurately forecast demand for our products could be negatively affected by many factors, including our limited historical commercial experience, rapid growth, failure to accurately manage our expansion strategy, product introductions by competitors, an increase or decrease in customer demand for our products, our failure to accurately forecast customer acceptance and adoption of new products, unanticipated changes in general market conditions or regulatory matters and weakening of economic conditions or consumer confidence in future economic conditions.

Inventory levels in excess of customer demand may result in a portion of our inventory becoming obsolete or expiring, as well as inventory write-downs or write-offs, which would negatively impact our gross margins and impair the strength of our brand. Conversely, if we underestimate customer demand for our products or our own requirements for components, sub-assemblies and materials, our third-party suppliers may not be able to deliver components, sub-assemblies and materials to meet our requirements, which could result in inadequate inventory levels or interruptions, delays or cancellations of deliveries to our customers, any of which would damage our reputation, customer relationships and business. In addition, several components, sub-assemblies and materials incorporated into our products require lengthy order lead times, and additional supplies or materials or additional manufacturing capacity may not be available when required on terms that are acceptable to us, or at all, and our third-party suppliers may not be able to allocate sufficient capacity in order to meet our increased requirements, any of which could have an adverse effect on our ability to meet customer demand for our products and our business, financial condition and results of operations.

Our quarterly and annual results may fluctuate significantly and may not fully reflect the underlying performance of our business.

Our quarterly and annual results of operations, including our revenue, may vary significantly in the future, and period-to-period comparisons of our operating results may not be meaningful. Accordingly, the results of any one quarter or period should not be relied upon as an indication of future performance or of the results for the year in which such quarter or period occurs. These fluctuations may occur due to a variety of factors, many of which are outside of our control, including, but not limited to:

36

Our long-term growth depends on our ability to enhance our products, expand our indications and develop and commercialize additional products in a timely manner. If we fail to identify, acquire and develop other products, we may be unable to grow our business.

The markets for our products are highly competitive, dynamic, and marked by rapid and substantial technological development and product innovation. New entrants or existing competitors could attempt to develop products that compete directly with ours. Demand for our products and future related products could be diminished by equivalent or superior products and technologies offered by competitors. If we are unable to innovate successfully, our products could become obsolete and our revenue would decline as our customers purchase our competitors’ products. Developing and improving products is expensive and time-consuming and could divert management’s attention away from our existing products. The success of any new product offering or product enhancements to our solutions will depend on several factors, including our ability to:

37

If we are unable to develop or improve products, applications or features due to constraints, such as insufficient cash resources, high employee turnover, inability to hire personnel with sufficient technical skills or a lack of other research and development resources, we may not be able to maintain our competitive position compared to other companies. Furthermore, many of our competitors devote a considerably greater amount of funds to their research and development programs than we do, and those that do not may be acquired by larger companies that could allocate greater resources to research and development programs. Our failure or inability to devote adequate research and development resources or compete effectively with the research and development programs of our competitors could harm our business.

In addition, we may choose to focus our efforts and resources on potential products or indications that ultimately prove to be unsuccessful, or to license or purchase marketed products that do not meet our financial expectations. As a result, we may fail to capitalize on viable commercial products or profitable market opportunities, be required to forego or delay pursuit of opportunities with other potential products or other diseases that may later prove to have greater commercial potential, or relinquish valuable rights to such potential products through collaboration, licensing or other royalty arrangements in cases in which it would have been advantageous for us to retain sole development and commercialization rights, which could adversely impact our business, financial condition and results of operations.

Cost-containment efforts of our customers, purchasing groups and governmental organizations could have a material adverse effect on our sales and results of operations. Consolidation in the healthcare industry or group purchasing organizations could lead to demands for price concessions, which may affect our ability to sell our products at prices necessary to support our current business strategies.

In an effort to reduce costs, many clinics and hospitals in the United States, including some of our customers, are members of Group Purchasing Organizations ("GPOs") and Integrated Delivery Networks ("IDNs"). GPOs and IDNs negotiate pricing arrangements with medical device companies and distributors and then offer these negotiated prices to affiliated hospitals and other members. GPOs and IDNs typically award contracts on a category-by-category basis through a competitive bidding process. Bids are generally solicited from multiple providers with the intention of driving down pricing or reducing the number of vendors. Due to the highly competitive nature of the GPO and IDN contracting processes, we may not be able to obtain new, or maintain existing, contract positions with major GPOs and IDNs. Furthermore, the increasing leverage of organized buying groups may reduce market prices for our products, thereby reducing our revenue and margins.

While having a contract with a GPO or IDN for a given product category can facilitate sales to members of that GPO or IDN, such contract positions can offer no assurance that any level of sales will be achieved, as sales are typically made pursuant to individual purchase orders. Even when a provider is the sole contracted supplier of a GPO or IDN for a certain product category, members of the GPO or IDN are generally free to purchase from other suppliers. Furthermore, GPO and IDN contracts typically are terminable without cause by the GPO or IDN upon 60 to 90 days’ notice. Accordingly, the members of such groups may choose to purchase alternative products due to the price or quality offered by other companies, which could result in a decline in our sales volumes and revenue.

Healthcare costs have risen significantly over the past decade, which has resulted in or led to numerous cost reform initiatives by legislators, regulators and third-party payors. Cost reform has triggered a consolidation trend in the healthcare industry to aggregate purchasing power, which may create more requests for pricing concessions in the future. Additionally, GPOs, IDNs and large single accounts may continue to use their market power to consolidate purchasing decisions for hospitals. We expect that market demand, government regulation, third-party coverage and reimbursement policies and societal pressures will continue to change the healthcare industry worldwide, resulting in further business consolidations and alliances among our customers, which may exert further downward pressure on the prices of our products. Any decline in the amount that payors reimburse our customers for procedures that use our Surgical Glaucoma products or in the amount that customers are willing to pay or that payors reimburse for procedures that use TearCare in the future, could make it difficult for customers to continue using, or to adopt, our products and could create additional pricing pressure for us. If we are forced to lower the price we charge for our products or add more components to our products, our gross margins will decrease, which will adversely affect our ability to invest in and grow our business.

38

We may be unable to manage the anticipated growth of our business.

In order to grow, we need to expand our commercial team, and general and administrative infrastructure. In addition to the need to scale our organization, future growth will impose significant added responsibilities on management, including the need to identify, recruit, train and integrate additional employees. Rapid expansion in personnel could mean that less experienced people market and sell our products, which could result in inefficiencies and unanticipated costs, reduced quality and disruptions to our operations. In addition, rapid and significant growth may strain our administrative and operational infrastructure. Our ability to manage our business and growth will require us to continue to improve our operational, financial and management controls, reporting systems and procedures. For example, we currently rely on a combination of direct sales personnel and independent distributors to sell our products in Europe, and we intend to grow our international sales through a combination of direct and distributor sales. If we are unable to manage our growth effectively, it may be difficult for us to execute our business strategy and our business could be harmed.

As demand for our current products or any of our future products increases, we will need to continue to expand customer service, billing and systems processes and enhance our internal quality assurance program. We cannot assure you that any increases in scale, related improvements and quality assurance will be successfully implemented or that appropriate personnel will be available to facilitate the growth of our business. Failure to implement necessary procedures, transition to new processes or hire the necessary personnel could result in higher costs of processing data or inability to meet increased demand.

Performance issues, service interruptions or price increases by our shipping carriers and distributors could negatively affect our business, financial condition and results of operations and harm our reputation and the relationship between us and the ECPs we work with.

Expedited, reliable shipping is essential to our operations. We rely heavily on providers of transport services for reliable and secure point-to-point transport of our products to our customers and for tracking of these shipments. Should a carrier encounter delivery performance issues such as loss, damage or destruction of any systems, it would be costly to replace such systems in a timely manner and such occurrences may damage our reputation and lead to decreased demand for our solutions and increased cost and expense to our business. In addition, any significant increase in shipping rates could adversely affect our operating margins and results of operations. Similarly, strikes, severe weather, natural disasters or other service interruptions affecting delivery services we use would adversely affect our ability to process orders for our products on a timely basis. These factors could negatively affect our business, financial condition and results of operations and harm our reputation and the relationship between us and the ECPs we work with.

Our products may become obsolete in the future.

The medical device industry is characterized by rapid and significant change. There can be no assurance that other companies will not succeed in developing or marketing devices or products that are more effective than our products or that would render our products obsolete or noncompetitive. Additionally, new surgical procedures, medications and other therapies could be developed that replace or reduce the importance of our products. Accordingly, our success will depend in part on our ability to respond quickly to medical and other changes through the development and introduction of new products. Product development involves a high degree of risk, and there can be no assurance that our new product development efforts will result in any commercially successful products.

We bear the risk of potential warranty claims on our products.

We provide limited warranties regarding our products, including warranties pertaining to freedom from defects and conformance to specifications. We are generally obligated under our sales contracts to repair, replace or credit or refund the purchase price of defective products. As a result, we bear the risk of potential warranty claims on our products. In the event that we attempt to recover some or all of the expenses associated with a warranty claim against us from our suppliers or vendors, we may not be successful in claiming recovery under any warranty or indemnity provided to us by such suppliers or vendors and any recovery from such vendor or supplier may not be adequate. In addition, warranty claims brought by our customers related to third-party components may arise after our ability to bring corresponding warranty claims against such suppliers expires, which could result in costs to us.

39

We may enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances or partnerships with third parties that may not result in the development of commercially viable products or product improvements or the generation of significant future revenues.

We may enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances, partnerships or other arrangements to develop new products or product improvements and to pursue new markets. Other companies, including those with substantially greater financial, marketing, sales, technology or other business resources, may compete with us for these opportunities or arrangements. We may not identify, secure, or complete any such transactions or arrangements in a timely manner, on a cost-effective basis, on acceptable terms or at all. We have limited institutional knowledge and experience with respect to these business development activities, and we may also not realize the anticipated benefits of any such transaction or arrangement. In particular, these collaborations may not result in the development of products that achieve commercial success or viable product improvements or result in significant revenues and could be terminated prior to developing any products.

Additionally, we may not be in a position to exercise sole decision-making authority regarding the transaction or arrangement, which could create the potential risk of creating impasses on decisions, and our future collaborators may have economic or business interests or goals that are, or that may become, inconsistent with our business interests or goals. It is possible that conflicts may arise with our collaborators, such as conflicts concerning the achievement of performance milestones, or the interpretation of significant terms under any agreement, such as those related to financial obligations or the ownership or control of intellectual property developed during the collaboration. If any conflicts arise with any future collaborators, they may act in their self-interest, which may be adverse to our best interest, and they may breach their obligations to us. In addition, we may have limited control over the amount and timing of resources that any future collaborators devote to our or their future products.

Disputes between us and any collaborators we may have in the future may result in litigation or arbitration which would increase our expenses and divert the attention of our management. Further, these transactions and arrangements will be contractual in nature and will generally be terminable under the terms of the applicable agreements and, in such event, we may not continue to have rights to the products relating to such transaction or arrangement or may need to purchase such rights at a premium. If we enter into in-bound intellectual property license agreements, we may not be able to fully protect the licensed intellectual property rights or maintain those licenses. Future licensors could retain the right to prosecute and defend the intellectual property rights licensed to us, in which case we would depend on the ability of our licensors to obtain, maintain and enforce intellectual property protection for the licensed intellectual property. These licensors may determine not to pursue litigation against other companies or may pursue such litigation less aggressively than we would. Further, entering into such license agreements could impose various diligence, commercialization, royalty or other obligations on us. Future licensors may allege that we have breached our license agreement with them, and accordingly seek to terminate our license and/or seek damages arising out of the alleged breach, which could adversely affect our competitive business position and harm our business prospects.

We depend on our senior management team and the loss of one or more key employees or an inability to attract and retain highly skilled employees will negatively affect our business, financial condition and results of operations.

Our success depends largely on the continued services of key members of our executive management team and others in key management positions. For example, the services of Paul Badawi, our Chief Executive Officer and David Badawi, our Chief Technology Officer, are essential to driving adoption of our products, executing on our corporate strategy and ensuring the continued operations and integrity of financial reporting within our company. In addition, the services of our sales professionals are critical to driving the growth in sales of our products. Any of our employees may terminate their employment with us at any time. We currently maintain a key person life insurance policy on Paul Badawi. If we lose one or more key employees, we may experience difficulties in competing effectively, developing our technologies and implementing our business strategy, which in turn would negatively affect our business.

In addition, our research and development programs, clinical and quality operations and sales efforts depend on our ability to attract and retain highly skilled engineers and sales professionals, as well as experienced regulatory, quality and clinical professionals. We may not be able to attract or retain qualified professionals in the future due to the competition for qualified personnel. We have from time to time experienced, and we expect to continue to experience, difficulty in hiring and retaining employees with appropriate qualifications. Many of the companies with which we compete for experienced personnel have greater resources than we do. If we hire employees from competitors or other companies, their former

40

employers may attempt to assert that these employees or we have breached legal obligations, resulting in a diversion of our time and resources and, potentially, damages.

In addition, job candidates and existing employees often consider the value of the stock awards they receive in connection with their employment. If the perceived benefits of our stock awards decline, either because of unfavorable fluctuations or declines in our stock price or for other reasons, it may harm our ability to recruit and retain highly skilled employees. Many of our employees have become or will soon become vested in a substantial amount of our common stock or a number of common stock options. Our employees may be more likely to leave us if the market price of our common stock approaches or falls below the exercise price of their vested and unvested option shares. Substantial declines in the market price of our common stock will also reduce the effectiveness of any restricted stock unit or other equity incentive awards in attracting and retaining employees, especially within the current highly competitive labor market. Our future success also depends on our ability to continue to attract and retain additional executive officers and other key employees. If we fail to attract new personnel or fail to retain and motivate our current personnel, it will negatively affect our business, financial condition and results of operations.

The use, misuse or off-label use of our products may result in injuries that lead to product liability suits, which could be expensive, divert management’s attention and harm our reputation and business. We may not be able to maintain adequate product liability insurance.

Our products are cleared or authorized by the FDA and certified in the EU to be marketed for certain specific intended uses. If physicians elect to use our products in manners outside of the intended uses that have been cleared, authorized, or certified, then such off-label use of our products may result in outcomes and adverse events that are sight threatening, necessitate medical or surgical intervention to preclude permanent impairment of vision, or result in a permanent impairment of vision, potentially leading to product liability claims. However, we cannot prevent a physician from using our products for off-label applications or using components or products that are not our products when performing procedures with our products. There may be increased risk of injury to patients if physicians attempt to use our devices off-label. In addition, we cannot guarantee that physicians are trained by us or their peers prior to utilizing our products. Complications resulting from the use of our products off-label or use by physicians who have not been trained appropriately, or at all, may not effectively treat the applicable conditions and may expose us to product liability claims or litigation by our customers or their patients and may harm our reputation.

In addition, if our products are defectively designed, manufactured or labeled, contain defective components or are misused, we may become subject to costly litigation initiated by hospitals, surgical centers, ECPs or patients. Product liability claims are especially prevalent in the medical device industry and could harm our reputation, divert management’s attention from our core business, attract negative publicity, be expensive to defend and may result in sizable damage awards against us. Although we maintain product liability insurance, we may not have sufficient insurance coverage for future product liability claims. We are not able to obtain insurance in amounts or scope sufficient to provide us with adequate coverage against all potential liabilities. Any product liability claims brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing continuing coverage, harm our reputation, significantly increase our expenses, and reduce product sales. Product liability claims could cause us to incur significant legal fees and deductibles and claims in excess of our insurance coverage would be paid out of cash reserves, harming our financial condition and operating results.

We may need additional funding to finance our planned operations, and may not be able to raise capital on acceptable terms, if at all, which could force us to delay, reduce or eliminate our product development programs and commercialization efforts.

Since inception, we have incurred significant net losses and expect to continue to incur net losses for the foreseeable future. Our operations have been financed primarily by net proceeds from the sale of our convertible preferred stock in private placements, indebtedness and, to a lesser extent, product revenue from sales of our products. As of December 31, 2022, we had $185.0 million in cash and cash equivalents, and an accumulated deficit of $239.2 million. Based on our current planned operations, we expect that our cash and cash equivalents and additional borrowings available under our credit facility will enable us to fund our operations for at least the next 12 months. We have based these estimates on assumptions that may prove to be wrong, and we could utilize our available capital resources sooner than we expect.

We expect to continue to invest in clinical trials or investigations that are designed to provide clinical evidence of the safety and efficacy of our products, the growth of our sales and marketing organization, and research and development of

41

product improvements and future products, including certain pharmaceutical product candidates, which will continue to increase our expenses. Accordingly, our future capital requirements will depend on many factors, including:

As a result of these and other factors, we may seek to raise additional capital through equity offerings or debt financings and such additional financing may not be available to us on acceptable terms, or at all. In addition, any additional equity or debt financing that we raise may contain terms that are not favorable to us or our stockholders. For example, if we raise funds by issuing equity or equity-linked securities, the issuance of such securities could result in dilution to our stockholders. Any equity securities issued may also provide for rights, preferences or privileges senior to those of holders of our common stock. In addition, the issuance of additional equity securities by us, or the possibility of such issuance, may cause the market price of our common stock to decline, and the price per share at which we sell additional shares of our common stock, or securities convertible into or exercisable or exchangeable for shares of our common stock, in future transactions may be higher or lower than the price per share paid by investors in the initial public offering of our common stock.

In addition, the terms of debt securities issued or borrowings could impose significant restrictions on our operations including restrictive covenants, such as limitations on our ability to incur additional debt or issue additional equity, limitations on our ability to pay dividends, limitations on our ability to acquire or license intellectual property rights, and other operating restrictions that could adversely affect our ability to conduct our business. In the event that we enter into collaborations or licensing arrangements to raise capital, we may be required to accept unfavorable terms, such as relinquishment or licensing of certain technologies or products that we otherwise would seek to develop or commercialize ourselves, or reserve for future potential arrangements when we might otherwise be able to achieve more favorable terms. In addition, we may be forced to work with a partner on one or more of our products or market development programs, which could lower the economic value of those programs to us.

If we are unable to obtain adequate financing on terms satisfactory to us when we require it, we may terminate or delay the development of one or more of our products, delay clinical trials or investigations necessary to market our products, or delay establishment of sales and marketing capabilities or other activities necessary to commercialize our products. If this were to occur, our ability to grow and support our business and to respond to market challenges could be significantly limited, which could have a material adverse effect on our business, financial condition and results of operations.

42

We have a significant amount of debt, which may affect our ability to operate our business and secure additional financing in the future.

In November 2020, we entered into credit and security agreements with MidCap Financial Services, which provide for a term loan facility and revolving line of credit ("2020 MidCap Credit Facility"). The 2020 MidCap Credit Facility consists of a term loan of up to $35.0 million, or the 2020 Term Loan, which has a stated floating interest rate equal to reserve-adjusted Secured Overnight Finance Rate ("SOFR") plus 7.00%, and a revolving line of credit of $5 million, or the 2020 Revolver, with a stated floating interest rate equal to reserve-adjusted SOFR plus 4.50%, a 0.5% unused line fee and a 0.5% collateral management fee. We further amended the 2020 MidCap Facility in October 2021 and November 2021 for purposes of relaxing certain financial reporting obligations and other operating covenants, and then again in May and December 2022 to provide for certain adjustments or restrictions concerning cash control and applicable interest rate under the facility. Also, in November 2022, we extended the date for commencement of principal payments under our term loan facility from December 1, 2022 to December 1, 2023. As of December 31, 2022 we had an aggregate of approximately $35 million in principal borrowings outstanding under the 2020 MidCap Credit Facility, excluding debt discounts. We must make interest payments under the 2020 MidCap Credit Facility, which has diverted and will continue to divert resources from other activities. We incurred an aggregate interest expense of $4.5 million and $4.4 million in the years ended December 31, 2022 and 2021, respectively.

Our obligations under the 2020 MidCap Credit Facility are collateralized by a security interest in substantially all of our assets, and we are subject to customary financial and operating covenants limiting our ability to, among other things, relocate or dispose of assets, undergo a change in control, merge or consolidate, enter into certain transactions with affiliates, make acquisitions, incur debt, pay dividends, grant liens, store certain amounts of inventory or equipment with third parties and make investments, in each case subject to certain exceptions. We are also subject to minimum trailing revenue targets that are evaluated on a monthly basis. The covenants related to the 2020 MidCap Credit Facility, as well as any future financing agreements into which we may enter, may restrict our ability to finance our operations and engage in, expand or otherwise pursue our business activities and strategies.

While we believe that we have not previously breached and are not currently in breach of these or any other covenants contained in the 2020 MidCap Credit Facility, there can be no guarantee that we will not breach these covenants in the future. Our ability to comply with these covenants may be affected by events beyond our control, and future breaches of any of these covenants could result in a default under the 2020 MidCap Credit Facility. If not waived, future defaults could cause all of the outstanding indebtedness under the 2020 MidCap Credit Facility to become immediately due and payable and terminate commitments to extend further credit and foreclose on the collateral granted to it to collateralize such indebtedness. If we do not have or are unable to generate sufficient cash available to repay our debt obligations when they become due and payable, either upon maturity or in the event of a default, our assets could be foreclosed upon and we may not be able to obtain additional debt or equity financing on favorable terms, if at all, which may negatively impact our ability to operate and continue our business as a going concern.

In order to service this indebtedness and any additional indebtedness we may incur in the future, we need to generate cash from our operating activities. Our ability to generate cash is subject, in part, to our ability to successfully execute our business strategy, as well as general economic, financial, competitive, regulatory and other factors beyond our control. We cannot assure you that our business will be able to generate sufficient cash flow from operations or that future borrowings or other financings will be available to us in an amount sufficient to enable us to service our indebtedness and fund our other liquidity needs. To the extent we are required to use cash from operations or the proceeds of any future financing to service our indebtedness instead of funding working capital, capital expenditures or other general corporate purposes, we will be less able to plan for, or react to, changes in our business, industry and in the economy generally. This may place us at a competitive disadvantage compared to our competitors that have less indebtedness or greater financial resources to service their debt.

We may seek to grow our business through acquisitions of or investments in new or complementary businesses, products or technologies, and the failure to manage acquisitions or investments, or the failure to integrate them with our existing business, could have a material adverse effect on us

From time to time, we expect to consider opportunities to acquire or make investments in other technologies, products, and businesses that may enhance our capabilities, complement our current products, or expand the breadth of our markets or customer base. Potential and completed acquisitions and strategic investments involve numerous risks, including:

43

We have no current commitments with respect to any acquisition or investment. Under the 2020 MidCap Credit Facility, we are restricted in our ability to pursue certain mergers, acquisitions, amalgamations or consolidations that we may believe to be in our best interest. We do not know if we will be able to identify acquisitions we deem suitable, whether we will be able to successfully complete any such acquisitions on favorable terms or at all, or whether we will be able to successfully integrate any acquired business, product, or technology into our business or retain any key personnel, suppliers, or distributors. Our ability to successfully grow through acquisitions depends upon our ability to identify, negotiate, complete, and integrate suitable target businesses and to obtain any necessary financing. These efforts could be expensive and time consuming, and may disrupt our ongoing business and prevent management from focusing on our operations. If we are unable to successfully integrate any acquired businesses, products, or technologies effectively, our business, results of operations, and financial condition will be materially adversely affected.

The planned international expansion of our business will expose us to market, legal, regulatory, political, operational, financial and economic risks associated with doing business outside of the United States.

We intend to increase our international presence, including securing additional regulatory approvals in targeted countries outside the United States. This strategy may include establishing and maintaining physician outreach and education capabilities outside of the United States and expanding our relationships with international payors. Doing business internationally involves a number of risks, including:

44

Any of these factors could significantly harm our future international expansion and operations and, consequently, have a material adverse effect on our business, financial condition and results of operations.

We could be adversely affected by violations of the FCPA and similar worldwide anti-bribery laws, anti-boycott and anti-money laundering laws and export regulations, and the outcome of any investigation, by government agencies of possible violations by us of these laws and regulations could have a material adverse effect on our business.

The FCPA prohibits companies and their intermediaries from making improper payments to foreign officials for the purpose of obtaining or retaining business. Other anti-corruption or anti-bribery laws, such as the Bribery Act, prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business in foreign countries. The FCPA also imposes accounting standards and requirements on publicly traded U.S. corporations and their foreign affiliates, which are intended to prevent the diversion of corporate funds to the payment of bribes and other improper payments, and to prevent the establishment of slush funds from which such improper payments can be made. Because of the predominance of government-sponsored healthcare systems around the world, many of our customer relationships outside of the U.S. are with governmental entities and are therefore subject to such anti-bribery laws. Our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employees or agents. Violations of these laws, or allegations of such violations, could disrupt our operations, involve significant management distraction, and result in a material adverse effect on our business, results of operations, and financial condition. We also could suffer severe penalties, including criminal and civil penalties, disgorgement, and other remedial measures, including further changes or enhancements to our procedures, policies, and controls, as well as potential personnel changes and disciplinary actions.

Furthermore, we are subject to anti-boycott laws, anti-money laundering laws, and the export controls and economic embargo rules and regulations of the U.S., including, but not limited to, the Export Administration Regulations and trade sanctions against embargoed countries, which are administered by the Office of Foreign Assets Control within the Department of the Treasury, as well as the laws and regulations administered by the Department of Commerce. These regulations limit our ability to market, sell, distribute, or otherwise transfer our products or technology to prohibited countries or persons. A determination that we have failed to comply, whether knowingly or inadvertently, may result in substantial penalties, including fines and enforcement actions and civil and/or criminal sanctions, the disgorgement of profits, and the imposition of a court-appointed monitor, as well as the denial of export privileges, and may have an adverse effect on our business and reputation.

Security breaches, loss of data and other disruptions could compromise sensitive information related to our business or our customer’s patients, or prevent us from accessing critical information and expose us to liability, which could adversely affect our business and our reputation.

In the ordinary course of our business, we may become exposed to, or collect and store, sensitive data, including procedure-based information and legally-protected health information, credit card, and other financial information, insurance information, and other potentially personally identifiable information. We also store sensitive intellectual property and other proprietary business information. We are taking measures to implement policies and procedures designed to ensure compliance with applicable data security and privacy-related laws and regulations and protect sensitive information from unauthorized access or disclosure. However, our information technology ("IT"), and infrastructure, and that of our third-party billing and collections provider and other technology partners and providers, may be vulnerable to cyber-attacks by hackers or viruses or breaches due to employee error, malfeasance or other disruptions. We rely extensively on IT systems, networks and services, including internet sites, data hosting and processing facilities and tools, physical security systems and other hardware, software and technical applications and platforms, some of which are managed, hosted, provided and/or used by third parties or their vendors, to assist in conducting our business. A significant

45

breakdown, invasion, corruption, destruction or interruption of critical information technology systems or infrastructure, by our workforce, others with authorized access to our systems or unauthorized persons could negatively impact operations.

The ever-increasing use and evolution of technology, including cloud-based computing, creates opportunities for the unintentional dissemination or intentional destruction of confidential information stored in our or our third-party providers’ systems, portable media or storage devices. For example, companies have experienced an increase in phishing and social engineering attacks from third parties in connection with the COVID-19 pandemic. We could also experience a business interruption, theft of confidential information or reputational damage from industrial espionage attacks, malware or other cyber-attacks, which may compromise our system infrastructure or lead to data leakage, either internally or at our third-party providers. Although the aggregate impact on our operations and financial condition has not been material to date, we have been the target of events of this nature and expect them to continue as cybersecurity threats have been rapidly evolving in sophistication and becoming more prevalent in the industry. We are investing in protections and monitoring practices of our data and IT to reduce these risks and continue to monitor our systems on an ongoing basis for any current or potential threats. There can be no assurance, however, that our efforts will prevent breakdowns or breaches to our or our third-party providers’ databases or systems, and such breakdowns or breaches could adversely affect our business, financial condition and reputation. We also intend to mitigate the risks related to these risks by purchasing cybersecurity insurance. However, such insurance, if purchased, will not necessarily cover all costs and impacts related to these risks.

Risks Related to Our Intellectual Property

Our success will depend on our, and any of our future licensors’, ability to obtain, maintain and protect our intellectual property rights.

Our commercial success depends in part on our ability to obtain and maintain patent and other intellectual property protection in the United States and other countries. We rely on patent protection, as well as a combination of copyright, trade secret and trademark laws, to protect the proprietary aspects of our technology and our brands, and to prevent others from developing and commercializing products that violate our intellectual property rights. However, these means may afford only limited protection and may not prevent our competitors from duplicating our products, prevent our competitors from gaining access to our proprietary information and technology, or permit us to gain or maintain a competitive advantage.

We have filed numerous patent applications seeking protection of products and other inventions originating from our research and development. Our patent applications may not result in issued patents, and any patents that are issued may not provide meaningful protection against competitors or competitive technologies. Further, the examination process may require us to narrow the claims for our pending patent applications, which may limit the scope of patent protection that may be obtained if these applications issue. The scope of a patent may also be reinterpreted after issuance. The rights that may be granted under our future issued patents may not provide us with the proprietary protection or competitive advantages we are seeking. It is also possible that we will fail to identify patentable aspects of inventions made in the course of our development and commercialization activities before it is too late to obtain patent protection on them. In addition, the patent prosecution process is expensive, time-consuming and complex, and we may not be able to file, prosecute, maintain, enforce or license all necessary or desirable patent applications at a reasonable cost or in a timely manner.

Additionally, while software and other of our proprietary works may be protected under copyright law, we have chosen not to register any copyrights in these works, and instead, primarily rely on protecting our software as a trade secret. In order to bring a copyright infringement lawsuit in the United States, the copyright must be registered. Accordingly, the remedies and damages available to us for unauthorized use of our software may be limited.

Changes in patent law could diminish the value of patents in general, thereby impairing our ability to protect our existing and future products.

Recent patent reform legislation could increase the uncertainties and costs surrounding the prosecution of patent applications and the enforcement or defense of issued patents. In 2011, the Leahy-Smith America Invents Act ("Leahy-Smith Act") was signed into law. The Leahy-Smith Act includes a number of significant changes to U.S. patent law. These include provisions that affect the way patent applications are prosecuted and also may affect patent litigation. These also include provisions that switched the United States from a first-to-invent system to a first-to-file system, allow third-party submission of prior art to the USPTO during patent prosecution and set forth additional procedures to attack the validity of a patent by the USPTO administered post grant proceedings. Under a first-to-file system, assuming the other requirements

46

for patentability are met, the first inventor to file a patent application generally will be entitled to the patent on an invention regardless of whether another inventor had made the invention earlier.

In addition, patent reform legislation may pass in the future that could lead to additional uncertainties and increased costs surrounding the prosecution, enforcement and defense of our patents and applications. Furthermore, the U.S. Supreme Court and the U.S. Court of Appeals for the Federal Circuit have made, and will likely continue to make, changes in how the patent laws of the United States are interpreted. Similarly, foreign courts have made, and will likely continue to make, changes in how the patent laws in their respective jurisdictions are interpreted. We cannot predict future changes in the interpretation of patent laws or changes to patent laws that might be enacted into law by U.S. and foreign legislative bodies. Those changes may materially affect our patents or patent applications and our ability to obtain additional patent protection in the future.

For example, in Europe, a new unitary patent system takes effect June 1, 2023, which will significantly impact European patents, including those granted before the introduction of such a system. Under the unitary patent system, European applications will have the option, upon grant of a patent, of becoming a Unitary Patent which will be subject to the jurisdiction of the Unitary Patent Court ("UPC"). As the UPC is a new court system, there is no precedent for the court, increasing the uncertainty of any litigation. Patents granted before the implementation of the UPC will have the option of opting out of the jurisdiction of the UPC and remaining as national patents in the UPC countries. Patents that remain under the jurisdiction of the UPC will be potentially vulnerable to a single UPC-based revocation challenge that, if successful, could invalidate the patent in all countries who are signatories to the UPC. We cannot predict with certainty the long-term effects of any potential changes.

We may become a party to intellectual property litigation or administrative proceedings that could be costly, time-consuming, unsuccessful, and could interfere with our ability to sell and market our products.

Competitors may infringe our patents, or we may be required to enforce our patents to protect our technology. We may also be required to file suit to protect our trade secrets, or may be involved in litigation defending against claims of infringement of the rights of others. In addition, our patents also may become involved in inventorship, priority or validity disputes. To counter or defend against such claims can be expensive and time-consuming and could divert our attention from other functions and responsibilities. In an infringement proceeding, a court may decide that a patent owned by us is invalid or unenforceable. Furthermore, even if our patents are found to be valid and infringed, a court may refuse to grant injunctive relief against the infringer and instead grant us monetary damages and/or ongoing royalties. Such monetary compensation may be insufficient to adequately offset the damage to our business caused by the infringer’s competition in the market. Adverse determinations against us in defending against infringement could subject us to significant liabilities to third parties, require us to seek licenses from third parties and prevent us from manufacturing, selling or using the product, any of which could severely harm our business. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during litigation.

Even if resolved in our favor, litigation or other legal proceedings relating to intellectual property claims may cause us to incur significant expenses and could distract our management and other personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments, and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on our common stock price. Such litigation or proceedings could substantially increase our operating losses and reduce the resources available for development activities or any future sales, marketing or distribution activities. We may not have sufficient financial or other resources to conduct such litigation or proceedings adequately. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their greater financial resources and more mature and developed intellectual property portfolios. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketplace. Any of the foregoing could have a material adverse effect on our business, financial condition or results of operations.

On September 16, 2021, we filed suit in the U.S. District Court for the District of Delaware (C.A. No. 1:21-cv-01317) alleging that Ivantis, Inc. directly or indirectly infringes U.S. Patent Nos. 8,287,482, 9,370,443, 9,486,361, and 10,314,742 previously issued to us by making, using, selling, and offering for sale the Hydrus® Microstent. On July 29, 2022, we filed an amended complaint adding Alcon Inc., Alcon Vision LLC, and Alcon Research, LLC as defendants and alleging that all defendants also directly or indirectly infringe U.S. Patent No. 11,389,328. Defendants filed counterclaims seeking

47

declaratory judgments that the patents-in-suit are invalid or not infringed upon. A five-day jury trial is scheduled to commence on April 8, 2024. Ivantis and Alcon filed petitions with the USPTO seeking inter partes review of U.S. Patent Nos. 8,287,482, 9,370,443, 9,486,361, and 10,314,742 (IPR2022-01529, IPR2022-01530, IPR2022-01533, IPR2022-01540). Around the end of March 2023, the USPTO will determine whether to institute inter partes review proceedings. If any inter partes review is instituted, the USPTO would make validity findings as to the affected patent(s) by the end of March 2024. We are presently unable to predict the outcome of this lawsuit or the inter partes review, or to reasonably estimate the potential financial impact of the lawsuit or the inter partes review, which exposes us to the intellectual property litigation risk factors described above.

If we are unable to protect the confidentiality of our other proprietary information, our business and competitive position may be harmed.

In addition to seeking patent protection for our products, we also rely upon unpatented trade secrets, know-how and continuing technological innovation to develop and maintain a competitive position. We seek to protect such proprietary information, in part, through confidentiality agreements with our employees, collaborators, contractors, advisors, consultants and other third parties and invention assignment agreements with our employees.

We cannot guarantee that we have entered into such agreements with each party that has or may have had access to our trade secrets or proprietary information. Additionally, despite these efforts, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive and time-consuming, and the outcome is unpredictable. In addition, some courts inside and outside the United States are less willing or unwilling to protect trade secrets. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor or other third party, we would have no right to prevent them from using that technology or information to compete with us. If any of our trade secrets were to be disclosed to, or independently developed by, a competitor or other third party, our competitive position would be materially and adversely harmed. Furthermore, we expect these trade secrets, know-how and proprietary information to over time be disseminated within the industry through independent development, the publication of journal articles describing the methodology and the movement of personnel from academic to industry scientific positions.

We also seek to preserve the integrity and confidentiality of our data and trade secrets by maintaining physical security of our premises and physical and electronic security of our information technology systems. While we have confidence in these individuals, organizations and systems, agreements or security measures may be breached, and we may not have adequate remedies for any breach. In addition, our trade secrets may otherwise become known, or be independently discovered by, competitors.

We may be subject to claims that we or our employees have misappropriated the intellectual property of a third party, including trade secrets or know-how, or are in breach of non-competition or non-solicitation agreements with our competitors.

Many of our employees and consultants were previously employed at or engaged by other medical device, biotechnology or pharmaceutical companies, including our competitors or potential competitors. Some of these employees and consultants may have executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Although we try to ensure that our employees and consultants do not use the intellectual property, proprietary information, know-how or trade secrets of others in their work for us, we may be subject to claims that we or these individuals have, inadvertently or otherwise, misappropriated the intellectual property or disclosed the alleged trade secrets or other proprietary information of these former employers or competitors or other third parties. To the extent that our employees, consultants or contractors use intellectual property or proprietary information owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions. Litigation may be necessary to defend against these claims. There is no guarantee of success in defending these claims, and even if we are successful, litigation could result in substantial cost and be a distraction to our management and other employees as described above.

We may be subject to claims challenging the inventorship or ownership of our patents and other intellectual property.

We may also be subject to claims that former employees, collaborators, or other third parties have an ownership interest in our current or future patents, patent applications, or other intellectual property, including as an inventor or co-inventor. We may be subject to ownership or inventorship disputes in the future arising, for example, from conflicting

48

obligations of consultants, contractors or others who are involved in developing our products. Although it is our policy to require our employees and contractors who may be involved in the conception or development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who, in fact, conceives or develops intellectual property that we regard as our own. The assignment of intellectual property rights may not be self-executing or the assignment agreements may be breached, and litigation may be necessary to defend against these and other claims challenging inventorship or ownership. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, valuable intellectual property, and other owners may be able to license their rights to other third parties, including our competitors. Such an outcome could have a material adverse effect on our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

Additionally, we may be subject to claims from third parties challenging our ownership interest in intellectual property we regard as our own, based on claims that our employees or consultants have breached an obligation to assign inventions to another employer, to a former employer, or to another person or entity. Litigation may be necessary to defend against any other claims, and it may be necessary or we may desire to enter into a license to settle any such claim; however, there can be no assurance that we would be able to obtain a license on commercially reasonable terms, if at all. If our defense to those claims fails, in addition to paying monetary damages, a court could prohibit us from using technologies or features that are essential to our products, if such technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. An inability to incorporate technologies or features that are important or essential to our products could have a material adverse effect on our business, financial condition and results of operations, and may prevent us from selling our products. In addition, we may lose valuable intellectual property rights or personnel. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products, which could have an adverse effect on our business, financial condition and results of operations.

If our trademarks and tradenames are not adequately protected, then we may not be able to build name recognition in our markets and our business may be adversely affected.

Our trademarks or trade names may be challenged, infringed, circumvented, declared generic or determined to be violating or infringing on other marks. We may not be able to protect our rights to these trademarks and trade names, which we need to build name recognition among potential partners and customers in our markets of interest. At times, competitors or other third parties may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity and possibly leading to market confusion. In addition, there could be potential trade name or trademark infringement or dilution claims brought by owners of other trademarks. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be adversely affected. Our efforts to enforce or protect our proprietary rights related to trademarks, trade secrets, domain names or other intellectual property may be ineffective, could result in substantial costs and diversion of resources and could adversely affect our business, financial condition and results of operations.

We are aware of a third party’s use of and pending U.S. application for the TEARCLEAR trademark in connection with ophthalmic pharmaceuticals, which we believe may be an infringement of our TEARCARE trademark. We are taking appropriate actions to protect our interests in this matter, which may include filing a complaint for trademark infringement in federal court.

Risks Related to Government Regulation

Our products, business practices, and operations are subject to extensive government regulation and oversight in the United States and elsewhere.

Our products are regulated as medical devices by the FDA and foreign regulatory authorities. We and our products are subject to extensive regulation in the United States and elsewhere, including by state agencies, the FDA and the FDA’s foreign counterparts. The FDA and foreign regulatory agencies regulate, among other things, with respect to medical devices: design, development, manufacturing and release; laboratory, preclinical and clinical testing; labeling, packaging, content and language of instructions for use and storage; product safety and efficacy; establishment registration and device listing; marketing, sales and distribution; pre-market clearance, approval, and certification; service operations; record keeping procedures; advertising and promotion; recalls and field safety corrective actions; post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury; post-market studies; and product import and export.

49

The law and regulations to which we are subject are complex, burdensome to understand and apply and have tended to become more stringent over time. Legal and regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales. The FDA and foreign regulatory authorities enforce these regulatory requirements through, among other means, periodic (unannounced) inspections and periodic reviews of public marketing and promotion materials. We do not know whether we will be found compliant in connection with any future FDA or foreign inspections or reviews. Failure to comply with applicable regulations could jeopardize our ability to sell our products and result in enforcement actions such as: warning letters; untitled letters; fines; injunctions; civil penalties; termination of distribution; recalls or seizures of products; delays in the introduction of products into the market; total or partial suspension of production; refusal to grant future clearances, approvals, or certifications; withdrawals or suspensions of current approvals or certifications, resulting in prohibitions on sales of our products; and in the most serious cases, criminal penalties.

We may not receive, or may be delayed in receiving, the necessary clearances, certifications or approvals for our future products or modifications to our current products, and failure to timely obtain necessary clearances, certifications or approvals for our future products or modifications to our current products would adversely affect our ability to grow our business.

In the U.S., before we can market a new medical device, or a new use of, new claim for or significant modification to an existing product, we must first receive either clearance under Section 510(k) of the FDCA, or 510(k), or approval of a pre-market approval application, or PMA, from the FDA, unless an exemption from pre-market review applies. In the process of obtaining PMA approval, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices.

In the U.S., we have obtained clearance from the FDA of OMNI and TearCare through the 510(k) clearance process. Any further modification to these products or their intended uses may require us to submit a new 510(k) premarket notification and obtain clearance, or submit a PMA and obtain FDA approval prior to implementing the change. Specifically, any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications or PMA applications for modifications to our products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The 510(k) clearance process usually takes from three to 12 months, whereas the process of obtaining a PMA generally takes from one to three years, or even longer, from the time the application is submitted to the FDA. Despite the time, effort and cost, a device may not be approved or cleared by the FDA. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business. Further, regulatory enforcement or inquiries, or other increased scrutiny on us, could dissuade some customers from using our products and adversely affect our reputation and the perceived safety or efficacy of our products. In addition, even if we are granted regulatory clearances or approvals, they may include significant limitations on the indicated uses for the device, which may limit the market for the device.

The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

50

Subject to the transitional provisions and in order to sell our products in EU member states, our products must comply with the general safety and performance requirements of the EU MDR, which repeals and replaces the Medical Devices Directive. Compliance with these requirements is a prerequisite to be able to affix the European Conformity, or CE, mark to our products, without which they cannot be sold or marketed in the EU. All medical devices placed on the market in the EU must meet the general safety and performance requirements laid down in Annex I to the EU MDR including the requirement that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. Medical devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and – where applicable – other persons, provided that any risks which may be associated with their use constitute acceptable risks when weighed against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. To demonstrate compliance with the general safety and performance requirements, we must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. A conformity assessment procedures generally requires the intervention of a notified body. The notified body would typically audit and examine the technical file and the quality system for the manufacture, design and final inspection of our devices. If satisfied that the relevant product conforms to the relevant general safety and performance requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EU. If we fail to comply with applicable laws and regulations, we would be unable to affix the CE mark to our products, which would prevent us from selling them within the EU.

We must inform the notified body that carried out the conformity assessment of the medical devices that we market or sell in the EU and the EEA of any planned substantial changes to our quality system or substantial changes to our medical devices that could affect compliance with the general safety and performance requirements laid down in Annex I to the MDR or cause a substantial change to the intended use for which the device has been CE marked. The notified body will then assess the planned changes and verify whether they affect the products’ ongoing conformity with the EU MDR. If the assessment is favorable, the notified body will issue a new certificate of conformity or an addendum to the existing certificate attesting compliance with the general safety and performance requirements and quality system requirements laid down in the Annexes to the MDR.

We are currently working with our notified body, BSI (which has been designated to certify products and services in accordance with the EU MDR), to progress on compliance with the EU MDR and reached a first milestone in February 2022 by successfully passing our EU MDR audit. However, as a result of the transition towards the new regime, notified body review times have lengthened, and obtaining re-certification of our products, seeking product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business in the EU.

The aforementioned EU rules are generally applicable in the EEA. Non-compliance with the above requirements would also prevent us from selling our products in these three countries.

We may incur significant liability if it is determined that we are promoting off-label uses of our products in violation of federal and state regulations in the United States or elsewhere.

Our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition against the promotion of the off-label use of our products or the pre-promotion of unapproved products. Healthcare providers may use our products off-label, as the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. However, if the FDA determines that our promotional materials or training constitutes promotion of an off-label use or the pre-promotion of an unapproved product, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an untitled letter, a warning letter, injunction, seizure, civil fines and criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an unapproved use, which could result in significant fines or penalties. Although our policy is to

51

refrain from statements that could be considered off-label promotion of our products or pre-promotion of an unapproved product, the FDA or another regulatory agency could disagree and conclude that we have engaged in improper promotional activities. In addition, the off-label use of our products may increase the risk of product liability claims, which are expensive to defend and could result in substantial damage awards against us and harm our reputation.

Failure to comply with post-marketing regulatory requirements could subject us to enforcement actions, including substantial penalties, and might require us to recall or withdraw a product from the market.

Even though we have obtained clearance from the FDA for OMNI and TearCare in the U.S. and certifications for OMNI in the EU, we are subject to ongoing and pervasive regulatory requirements governing, among other things, the manufacture, marketing, advertising, medical device reporting, sale, promotion, import, export, registration, and listing of devices. For example, we must submit periodic reports to the FDA as a condition of 510(k) clearance. These reports include information about failures and certain adverse events associated with the device after its clearance. Failure to submit such reports, or failure to submit the reports in a timely manner, could result in enforcement action by the FDA. Following its review of the periodic reports, the FDA might ask for additional information or initiate further investigation. In addition, we must maintain an active registration of our facilities and listing of our products in order to legally market them in the United States. If the FDA were to disagree with our product listing or otherwise take issue with our registration and listing compliance, it could result in delisting of our products or other enforcement action resulting in potential inability to market our products. For example, in October 2020, the FDA communicated to us that the previous version of our TearCare System may not have been eligible for an exemption from 510(k) clearance. In response to that communication, among other things, we submitted a 510(k) premarket notification seeking clearance for TearCare in November 2020. The FDA requested several safety tests and modifications to this submission which we believe would have required additional time to complete beyond the designated review process. We voluntarily withdrew this submission in May 2021 to allow us to comply with the FDA’s requests in a comprehensive manner. We completed the additional testing and modifications requested by the FDA and received 510(k) clearance of TearCare for an expanded indication for use in December 2021. In February 2022, we received further communications from the FDA regarding the appropriateness of the marketing and distribution of our legacy TearCare Systems as a 510(k)-exempt device without premarket notification to and authorization from the FDA. We conducted a voluntary recall of our legacy TearCare system because the FDA informed us that the legacy system’s advanced technology made it ineligible for an exemption from 510(k) clearance. Further, this voluntary recall did not involve the new version of the TearCare system, which has received premarket clearance from the FDA and will remain on the market. We provided notice to the FDA in the fourth quarter of 2022 that we had completed all activities and requested close of the recall.

The regulations to which we are subject are complex and have become more stringent over time. Regulatory changes could result in restrictions on our ability to continue or expand our operations, higher than anticipated costs, or lower than anticipated sales. Even after we have obtained the proper regulatory clearance to market a device, we have ongoing responsibilities under FDA regulations and applicable foreign laws and regulations. The FDA, state and foreign regulatory authorities have broad enforcement powers. Our failure to comply with applicable regulatory requirements could result in enforcement action by the FDA, state or foreign regulatory authorities, which may include any of the following sanctions:

52

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, financial condition and results of operations. In addition, the FDA and foreign regulatory authorities may change its clearance or certification policies, adopt additional regulations or revise existing regulations, or take other actions, which may prevent or delay clearance, approval, or certification of our future products under development or impact our ability to modify our currently cleared or certified products on a timely basis. Such policy or regulatory changes could impose additional requirements upon us that could delay our ability to obtain new clearances, approvals, or certifications, increase the costs of compliance or restrict our ability to maintain our clearances and certifications of our current products.

A recall or suspension of our products, or the discovery of serious safety issues with our products, could have a significant negative impact on us.

The methods used in, and the facilities used for, the manufacture of our products must comply with the FDA’s QSR and, subject to transitional provisions, the EU MDR, both of which are complex regulatory schemes that cover the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, installation, servicing and shipping of medical devices. Furthermore, we are required to maintain, and to verify that our suppliers maintain, facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements. Our products are also subject to similar state regulations, various laws and regulations of foreign countries governing manufacturing and a requirement for adherence to industry standards of the International Standards Organization, or ISO, in connection with our medical device operations outside of the United States. Failure by us or one of our third-party suppliers to comply with applicable FDA or foreign requirements or later discovery of previously unknown problems with our products or manufacturing processes could result in, among other things civil penalties, suspension or withdrawal of clearances, seizures or recalls of our products, total or partial suspension of production or distribution, refusal to grant pending or future clearances, approvals, or certifications for our products, clinical holds, refusal to permit the import or export of our products, and criminal prosecution. Furthermore, regulatory authorities have broad discretion to require the recall or suspension of a product or to require that manufacturers alert customers of safety risks. A government-mandated or voluntary recall or suspension by us, one of our distributors or any of our third-party suppliers could occur as a result of an unacceptable risk to health, component failures, manufacturing errors, design or labeling defects or other deficiencies and issues. Recalls, suspensions or other notices relating to any products that we distribute would divert managerial and financial resources, and have an adverse effect on our reputation, financial condition and operating results.

Further, under the FDA’s medical device reporting regulations and similar foreign regulations, we are required to maintain appropriate quality systems and report incidents in which our product may have caused or contributed to serious injury or death in which our product malfunctioned and, if the malfunction were to recur, would likely cause or contribute to serious injury or death. Repeated product malfunctions may result in a voluntary or involuntary product recall or suspension of product sales, which could divert managerial and financial resources, impair our ability to manufacture our products in a cost-effective and timely manner and have an adverse effect on our reputation, financial condition and operating results. If we initiate a correction or removal for our products to reduce a risk to health posed by them or to remedy a violation of law that may present a risk to health, we would be required to submit a report to the FDA and may be required to submit similar notifications to other regulatory authorities. This report could lead to increased scrutiny by the FDA, other foreign regulatory agencies and our customers regarding the quality and safety of our products. Furthermore, the submission of these reports, to the extent made publicly available in accordance with FDA regulations, could be used by competitors against us or otherwise publicized and cause physicians to delay or cancel product orders, which will harm our reputation. Depending on the corrective action we take to redress a product’s deficiencies or defects, the FDA or FDA’s foreign counterparts may require, or we may decide, that we will need to obtain new clearances, certifications or approvals for the device before we may market or distribute the corrected device. Seeking such clearances, certifications or approvals may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including FDA warning letters, product seizure, injunctions, administrative penalties or civil or criminal fines.

We have received ISO 13485:2016 certification for our quality management system. ISO certification generally includes recertification audits every third year, scheduled annual surveillance audits and periodic unannounced audits.

53

We can provide no assurance that we will be found to remain in compliance with the QSR or ISO standards upon a regulator’s review. If the FDA, other regulator, or notified body, inspect or audit any of our manufacturers’ facilities and discovers compliance problems, we may have to cease manufacturing and product distribution until we can take the appropriate remedial steps to correct the audit findings. Any of the actions noted above could significantly and negatively affect supply of our products. Taking corrective action may be expensive, time-consuming and a distraction for management. If any of these events occurs, our reputation could be harmed, we could be exposed to product liability claims and we could lose customers and experience reduced sales and increased costs.

If we do not obtain and maintain applicable regulatory registrations, clearances, certifications or approvals for our products, we will be unable to market and sell our products outside of the U.S.

We intend to expand our sales operations outside of the U.S. sales of our products outside of the U.S. are subject to foreign regulatory requirements that vary widely from country to country. In addition, the FDA regulates exports of medical devices from the U.S. While the regulations of some countries may not impose barriers to marketing and selling our products or only require notification, others require that we obtain the clearance or approval of a specified regulatory body. Complying with foreign regulatory requirements, including obtaining registrations, clearances, certifications or approvals, can be expensive and time-consuming, and we may not receive regulatory clearances, certifications or approvals in each country in which we plan to market our products or we may be unable to do so on a timely basis. The time required to obtain registrations, clearances, certifications or approvals, if required by other countries, may be longer than that required for FDA clearance or approval, and requirements for such registrations, clearances, certifications or approvals may significantly differ from FDA requirements. If we modify our products, we may need to apply for regulatory clearances or approvals before we are permitted to sell the modified product.

In addition, we may not continue to meet the quality and safety standards required to maintain the authorizations that we have received. If we are unable to maintain our authorizations in a particular country, we will no longer be able to sell the applicable product in that country.

Regulatory clearance or approval by the FDA does not ensure registration, clearance, certification or approval by regulatory authorities or notified bodies in other countries, and registration, clearance, certification or approval by one or more foreign regulatory authorities or notified bodies does not ensure registration, clearance, certification or approval by regulatory authorities or notified bodies in other foreign countries or by the FDA. However, a failure or delay in obtaining registration or regulatory clearance, certification or approval in one country may have a negative effect on the regulatory process in others.

We are subject to certain federal, state and foreign fraud and abuse laws, health information privacy and security laws and transparency laws that could subject us to substantial penalties. Additionally, any challenge to or investigation into our practices under these laws could cause adverse publicity and be costly to respond to, and thus could harm our business.

There are numerous U.S. federal and state, as well as foreign, laws pertaining to healthcare fraud and abuse, including anti-kickback, false claims and physician transparency laws. Our business practices and relationships with providers are subject to scrutiny under these laws. We may also be subject to privacy and security regulation related to patient, customer, employee and other third-party information by both the federal government and the states and foreign jurisdictions in which we conduct our business. The healthcare laws and regulations that may affect our ability to operate include, but are not limited to:

54

These laws and regulations, among other things, constrain our business, marketing and other promotional and research activities by limiting the kinds of financial arrangements, including sales programs, we may have with hospitals, ambulatory surgery centers, physicians or other potential purchasers of our products. We have entered into consulting agreements with physicians, including some who have ownership interests in us, which could be viewed as influencing the purchase of or use of our products in procedures they perform. Compensation under some of these arrangements includes the provision of stock or stock options. Due to the breadth of these laws, the narrowness of statutory exceptions and regulatory safe harbors available, and the range of interpretations to which they are subject, it is possible that some of our current or future practices might be challenged under one or more of these laws.

To enforce compliance with the healthcare regulatory laws, certain enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Responding to investigations can be time-and resource-consuming and can divert management’s attention from the business. Additionally, as a result of these investigations, healthcare providers and entities may have to agree to additional compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or

55

otherwise have an adverse effect on our business, financial condition and results of operations. Even an unsuccessful challenge or investigation into our practices could cause adverse publicity, and be costly to respond to.

Our activities, including those relating to providing billing, coding, coverage and reimbursement information about procedures using our products to our customers and the sale and marketing of our products, may be subject to scrutiny under these laws. The growth of our business and sales organization and our expansion outside of the United States may increase the potential of violating these laws or our internal policies and procedures. Any action brought against us for violation of these or other laws or regulations, even if we successfully defend against it, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business, and could result in a material adverse effect on our reputation. If our operations are found to be in violation of any of the federal, state and foreign laws described above or any other current or future fraud and abuse or other healthcare laws and regulations that apply to us, we may be subject to significant penalties, including significant criminal, civil, and administrative penalties, damages, fines, exclusion from participation in government programs, such as Medicare and Medicaid, imprisonment, contractual damages, reputation harm and disgorgement and we could be required to curtail, restructure or cease our operations. Any of the foregoing consequences will negatively affect our business, financial condition and results of operations.

The scope and enforcement of these laws is uncertain and subject to rapid change in the current environment of healthcare reform. Our current or future activities could be subject to challenge under these laws. Any of these challenges could have a material adverse effect on our reputation, business, financial condition and operating results.

If we are found to have violated laws concerning the privacy and security of patient health information or other personal information, we could be subject to civil or criminal penalties, which could increase our liabilities or harm our reputation or business.

In the conduct of our business, we may at times process personal information, including health-related personal information. The U.S. federal government and various states and regulatory agencies, including the FDA, have adopted or proposed laws, regulations, guidelines and rules for the collection, distribution, use and storage of personal information of individuals. These laws include HIPAA and related regulations, as well as the CCPA and the CPRA. In addition, certain state and non-U.S. laws, such as GDPR, govern the privacy and security of personal (including health) data in certain circumstances, some of which are more stringent than U.S. federal law and many of which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Failure to comply with these laws, where applicable, can result in the imposition of significant civil and/or criminal penalties and private litigation.

Any actual or perceived failure by us or the third parties with whom we work to comply with privacy or security laws, policies, legal obligations or industry standards, or any security incident that results in the unauthorized release or transfer of personally identifiable information, may result in governmental enforcement actions and investigations including by European Data Protection Authorities and U.S. federal and state regulatory authorities, fines and penalties, litigation and/or adverse publicity, including by consumer advocacy groups, and could cause our customers, their patients and other healthcare professionals to lose trust in us, which could harm our reputation and have a material adverse effect on our business, financial condition and results of operations.

Our employees, consultants, and other commercial partners may engage in misconduct or other improper activities, including non-compliance with regulatory standards and requirements.

We are exposed to the risk that our employees, consultants, distributors and other commercial partners and business associates may engage in fraudulent or other illegal activity. Misconduct by these parties could include intentional, reckless or negligent conduct or other unauthorized activities that violate federal and/or state laws and regulations, such as laws or regulations requiring the reporting of true, complete and accurate information to such regulators, manufacturing standards, healthcare fraud and abuse laws and regulations in the U.S. and internationally or laws that require the true, complete and accurate reporting of financial information or data. In particular, sales, marketing and business arrangements in the healthcare industry, including the sale of medical devices, are subject to extensive laws and regulations intended to prevent fraud, misconduct, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. It is not always possible to identify and deter misconduct by our employees, consultants and other third parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any such actions are instituted against us and we are not successful in

56

defending ourselves or asserting our rights, those actions could result in the imposition of significant fines or other sanctions, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings, and curtailment of operations, any of which could adversely affect our business, financial condition and results of operations. Whether or not we are successful in defending against such actions or investigations, we could incur substantial costs, including legal fees and reputational harm, and divert the attention of management in defending ourselves against any of these claims or investigations.

Compliance with environmental laws and regulations could be expensive, and the failure to comply with these laws and regulations could subject us to significant liability.

Our research and development operations involve the use of hazardous substances, such as isopropyl alcohol and various adhesives. We are subject to a variety of federal, state, local and foreign environmental laws and regulations relating to the storage, use, handling, generation, manufacture, treatment, discharge and disposal of, hazardous substances. Our products may also contain hazardous substances, and they are subject to laws and regulations relating to labeling requirements and to their sale, collection, recycling, treatment, storage and disposal. Compliance with these laws and regulations may be expensive and noncompliance could result in substantial fines and penalties. Environmental laws and regulations also impose liability for the remediation of releases of hazardous substances into the environment and for personal injuries resulting from exposure to hazardous substances, and they can give rise to substantial remediation costs and to third-party claims, including for property damage and personal injury. Liability under environmental laws and regulations can be joint and several and without regard to fault or negligence, and they tend to become more stringent over time, imposing greater compliance costs and increased risks and penalties associated with violations. We cannot assure you that violations of these laws and regulations, or releases of or exposure to hazardous substances, will not occur in the future or have not occurred in the past, including as a result of human error, accidents, equipment failure or other causes. The costs of complying with environmental laws and regulations, and liabilities that may be imposed for violating them, or for remediation obligations or responding to third-party claims, could negatively affect our business, financial condition and results of operations.

Risks Related to Our Common Stock

The price of our common stock may fluctuate substantially or may decline regardless of our operating performance and you could lose all or part of your investment

The market price of our common stock may be highly volatile and may fluctuate or decline substantially as a result of a variety of factors, some of which are beyond our control or are related in complex ways, including:

57

In recent years, including as the result of the COVID-19 pandemic, the stock markets generally have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of listed companies. Broad market and industry factors may significantly affect the market price of our common stock, regardless of our actual operating performance.

In addition, in the past, stockholders have instituted securities class action litigation following periods of market volatility. If we were to become involved in securities litigation, it could subject us to substantial costs, divert resources and the attention of management from our business and harm our business, results of operations, financial condition and reputation. These factors may materially and adversely affect the market price of our common stock.

If we fail to maintain effective internal control over financial reporting and effective disclosure controls and procedures, we may not be able to accurately report our financial results in a timely manner or prevent fraud, which may adversely affect investor confidence in our company.

As a public company, we are required to comply with the SEC’s rules implementing Sections 302 and 404 of the Sarbanes-Oxley Act, which require management to certify financial and other information in our quarterly and annual reports and provide an annual management report on the effectiveness of controls over financial reporting. In particular, we must perform system and process evaluations, document our controls and perform testing of our key controls over financial reporting to allow management and our independent registered public accounting firm to report on the effectiveness of our internal control over financial reporting. We have incurred significant expense and devoted substantial management effort to complying with the requirements of Section 404 of the Sarbanes-Oxley Act, which we expect will continue. We anticipate hiring additional accounting and financial staff with appropriate public company experience and technical accounting knowledge to support future growth. If we are not able to comply with the requirements of Section 404 of the Sarbanes-Oxley Act or if we encounter difficulties in the timely and accurate reporting of our financial results, or if we or our independent registered public accounting firm identify deficiencies in our internal control over financial reporting that are deemed to be material weaknesses, our investors could lose confidence in our reported financial information, the market price of our stock may decline and we could be subject to lawsuits, sanctions or investigations by regulatory authorities, which would require additional financial and management resources.

Material weaknesses in our internal control over financial reporting may cause us to fail to timely and accurately report our financial results or result in a material misstatement of our financial statements.

In connection with the preparation of our financial statements in connection with our IPO, we identified a material weakness in our internal controls due to a lack of sufficient full-time accounting personnel with requisite experience and deep technical accounting knowledge to (i) identify and resolve complex accounting issues under generally accepted accounting principles in the United States, or GAAP, and (ii) enable appropriate segregation of duties and reviews over the financial reviews over the financial close and reporting process.

We are evaluating and implementing additional internal controls and procedures to remediate this material weakness, however, we cannot assure you that these or other measures will fully remediate the material weakness in a timely manner or prevent future material weaknesses from occurring. As part of our remediation plan to address the material weakness identified above, we have hired additional accounting employees with specific technical accounting and financial reporting experience necessary for a public company. We will continue to assess the adequacy of our accounting personnel and resources, and will add additional personnel, as well as adjust our resources, as necessary, commensurate with any increase in the size and complexity of our business.

58

If we identify future material weaknesses in our internal controls over financial reporting or fail to meet the demands that will be placed upon us as a public company, including the requirements of the Sarbanes-Oxley Act, we may be unable to accurately report our financial results or report them within the timeframes required by law or stock exchange regulations. Failure to comply with Section 404 could also potentially subject us to sanctions or investigations by the SEC or other regulatory authorities. If additional material weaknesses exist or are discovered in the future, and we are unable to remediate any such material weaknesses, our reputation, financial condition, and operating results could suffer.

Provisions in our corporate charter documents and under Delaware law could make an acquisition of our company, which may be beneficial to our stockholders, more difficult and may prevent attempts by our stockholders to replace or remove our current management.

Provisions in our restated certificate of incorporation and our restated bylaws may discourage, delay or prevent a merger, acquisition or other change in control of our company that stockholders may consider favorable, including transactions in which you might otherwise receive a premium for your shares. These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. In addition, because our board of directors is responsible for appointing the members of our management team, these provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors. Among other things, these provisions include those establishing:

Moreover, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the General Corporation Law of the State of Delaware, which prohibits a person who owns in excess of 15% of our outstanding voting stock from merging or combining with us for a period of three years after the date of the transaction in which the person acquired in excess of 15% of our outstanding voting stock, unless the merger or combination is approved in a prescribed manner.

59

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties.

Our corporate headquarters are located in Menlo Park, California, where we lease approximately 10,823 square feet of office, research and development, engineering and laboratory space pursuant to a lease that commenced effective August 1, 2021, and expires on August 31, 2024. We also lease approximately 2,040 square feet of office space, which is primarily used by our commercial leadership team, in Southlake, Texas, pursuant to a lease that commenced on April 30, 2019 and expires on May 15, 2024. We believe that our existing facilities are adequate to meet our business requirements for the near-term, and that additional space will be available on commercially reasonable terms, if required.

Item 3. Legal Proceedings.

On September 16, 2021, we filed suit in the U.S. District Court for the District of Delaware (C.A. No. 1:21-cv-01317) alleging that Ivantis, Inc. directly or indirectly infringes U.S. Patent Nos. 8,287,482, 9,370,443, 9,486,361, and 10,314,742 by making, using, selling, and offering for sale the Hydrus® Microstent. Our complaint seeks money damages and injunctive relief. On July 29, 2022, we filed an amended complaint adding Alcon Inc., Alcon Vision LLC, and Alcon Research, LLC as defendants and alleging that all defendants also directly or indirectly infringe U.S. Patent No. 11,389,328. A five-day jury trial is scheduled to commence on April 8, 2024. Ivantis and Alcon filed petitions with the USPTO seeking inter partes review of U.S. Patent Nos. 8,287,482, 9,370,443, 9,486,361, and 10,314,742 (IPR2022-01529, IPR2022-01530, IPR2022-01533, IPR2022-01540). Around the end of the first quarter of 2023, the USPTO will determine whether to institute inter partes review proceedings. If any inter partes review is instituted, the USPTO would make validity findings as to the affected patent(s) by the end of March 2024. We are presently unable to predict the outcome of this lawsuit or inter partes review, or to reasonably estimate the potential financial impact of the lawsuit or inter partes review on the Company, if any.

We may, in the ordinary course of business, face various claims brought by third parties, and we may, from time to time, make claims or take legal actions to assert our rights, including intellectual property rights as well as claims relating to employment matters and the safety or effectiveness of our products. Any of these claims could subject us to costly litigation, and, while we generally believe that we have adequate insurance to cover many different types of liabilities, our insurance carriers may deny coverage, may be inadequately capitalized to pay on valid claims, or our policy limits may be inadequate to fully satisfy any damage awards or settlements. If this were to happen, the payment of any such awards could have a material adverse effect on our business, financial condition and results of operations. Additionally, any such claims, whether or not successful, could damage our reputation and business.

Item 4. Mine Safety Disclosures.

Not applicable.

60

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market for Common Stock

Our common stock has been listed on The Nasdaq Global Market under the symbol “SGHT” since July 15, 2021. Prior to this date, there was no public market for our common stock.

Holders of Record

As of March 9, 2023, there were approximately 13 holders of record of our common stock. The actual number of stockholders is greater than this number of holders of record and includes stockholders who are beneficial owners but whose shares are held in the street name by brokers and other nominees.

Initial Public Offering

On July 14, 2021, our registration statement on Form S-1 (File No. 333-257320) relating to our initial public offering ("IPO") of common stock became effective. The IPO closed on July 15, 2021, at which time we issued 11,500,000 shares of our common stock at a price of $24.00 per share.

There has been no material change in the planned use of proceeds from our IPO as described in our final prospectus dated July 14, 2021 and filed with the SEC on July 15, 2021 pursuant to Rule 424(b) under the Securities Act.

Dividend policy

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all available funds and future earnings, if any, to fund the operation, development and expansion of our business, and we do not anticipate paying any cash dividends in the foreseeable future. Any future determination regarding the declaration and payment of dividends will be at the discretion of our board of directors and will depend on then-existing conditions, including our financial condition, operating results, contractual restrictions, capital requirements, business prospects, and other factors our board of directors may deem relevant.

Securities Authorized for Issuance under Equity Compensation Plans

Information about our equity compensation plans is incorporated herein by reference to Item 12 of Part III of this Annual Report on Form 10-K.

Item 6. [Reserved.]

61

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

You should read the following discussion and analysis of our financial condition and results of operations together with the information presented in our financial statements and the related notes included elsewhere in this Annual Report on Form 10-K. This discussion contains forward-looking statements based upon current plans, expectation, and beliefs that involve risks and uncertainties. As a result of many factors, including those factors set forth in the “Risk Factors” section of this Annual Report on Form 10-K, our actual results could differ materially from the results described in or implied by these forward-looking statements. Please also see the section of this Annual Report on Form 10-K titled “Forward-Looking Statements.”

Overview

Sight Sciences’ mission is to transform ophthalmology and optometry through the development and commercialization of proprietary devices that target the underlying causes of the world’s most prevalent eye diseases. We are passionate about improving patients’ lives. Our objective is to develop and market products for use in new treatment paradigms and to create an interventional mindset in eyecare whereby our products may be used in procedures which supplant conventional outdated approaches. Our business philosophy is grounded in the following principles:

Our initial product development has focused on the treatment of two of the world’s most prevalent and underserved eye diseases, glaucoma and dry eye disease. We have commercialized products in each of our two reportable segments; Surgical Glaucoma and Dry Eye. Our Surgical Glaucoma segment consists of sales of the OMNI and SION, while our Dry Eye segment includes sales of the TearCare, and related components and accessories. Each product is primarily sold through a highly-involved direct sales model that offers intensive education, training and customer service. We believe this philosophy and model not only enables us to differentiate our products and our overall company from competitors, but also to expand our addressable market by educating ECPs, patients and other stakeholders on our products and evolving treatment paradigms. Outside of the U.S., we have historically sold OMNI primarily through a network of distributors, although we began employing a small direct sales force outside of the United States in 2021.

We sell OMNI and SION to facilities where ophthalmic surgeons perform outpatient procedures, mainly ASCs and HOPDs, which are typically reimbursed by Medicare or private payors for procedures using our products. We sell TearCare to optometrist and ophthalmologist practices. Currently, there is no meaningful reimbursement coverage by Medicare or private payors for MGD procedures, including TearCare, and patients typically pay out-of-pocket for TearCare. We are continuing our controlled commercial launch and are focused on our comprehensive, clinical data-driven long-term market development plan that aims to improve awareness and patient access to TearCare. We have dedicated meaningful resources to execute our commercial strategy and we continue to expand our sales organization through additional sales representatives and territories. The overall success of our approach to eyecare to date is evidenced by the over 130,000 estimated uses of OMNI and its direct predicates in over 1,500 hospitals and ASCs in the U.S. and Europe, and over 20,000 estimated uses of TearCare in over 1,000 eyecare facilities in the U.S. through December 31, 2022.

We currently operate no manufacturing facilities and instead contract with third parties for our production requirements. We believe our suppliers will be able to meet our current and anticipated manufacturing needs across all our products. We plan to continue to utilize third party contract manufacturers for our products and any related components.

Our gross margin in our Surgical Glaucoma segment for the years ended December 31, 2022 and 2021 was 87.4% and 86.1%, respectively. In 2021, we shifted our primary production of OMNI from a U.S.-based third-party contract manufacturer, to a lower cost, higher volume contract manufacturer in Asia. We are in the process of supplementing this OMNI production capacity with a U.S.-based contract manufacturer. These cost optimization initiatives contributed to the increase in gross margins in our Surgical Glaucoma segment. Our gross margin in our Dry Eye segment for the years ended

62

December 31, 2022 and 2021 was 29.1% and 13.1%, respectively. The TearCare System includes the SmartHub component, which is typically only sold in initial purchase orders, and single-use SmartLids which are sold as part of initial purchase orders and through repeat orders as the ECP performs procedures over time. Given the earlier stage of TearCare’s commercial development, we expect our Dry Eye segment’s gross margins to be lower than our Surgical Glaucoma segment’s gross margins for the near and medium-term due to the allocation of fixed labor and overhead costs to the segment's cost of goods sold.

We believe in the importance of continued strategic investment in initiatives that: further demonstrate our products’ clinical effectiveness and safety to potential customers, patients, payors and regulators; enhance our commercial capabilities, including resources dedicated to sales, marketing and education; ensure the broadest possible patient access to the treatment alternatives that our products are cleared to offer; enhance and improve upon our existing product technologies; and allow us to innovate new products, devices or drugs, in glaucoma and ocular surface disease or in new eye disease areas. As a result, we intend to continue to invest in clinical studies, sales and marketing, education initiatives, market access, and product development. Because of these and other factors, we expect to continue to incur net losses for at least the next several fiscal years. Moreover, we expect to incur expenses as a result of operating as a public company, including expenses related to compliance with the rules and regulations of the SEC and those of the Nasdaq Stock Market, additional insurance expenses, investor relations activities and other administrative and professional services. As a result of these and other factors, we may require and seek additional debt and equity financing to fund our operations and planned growth.

To date, our primary sources of capital has been private placements of redeemable convertible preferred stock, debt financing agreements, the sale of common stock in our IPO, and revenue from the sale of our products. In July 2021, we completed our IPO, receiving net proceeds of $252.2 million. As of December 31, 2022, we had an outstanding term loan balance of $35.0 million (excluding debt discount and amortized debt issuance costs), cash and cash equivalents of $185.0 million and an accumulated deficit of $239.2 million.

During the year ended December 31, 2022, we generated revenue of $71.3 million, with a gross margin of 82.7%. Our net loss for the year ended December 31, 2022 was $86.2 million. For the year ended December 31, 2021, we generated revenue of $49.0 million, with a gross margin of 82.4%. Our net loss for the year ended December 31, 2021 was $63.0 million. For all periods presented, substantially all of our revenue was generated from customers in the U.S.

Impact of COVID-19

The global COVID-19 pandemic has impacted and may in the future impact demand for our products, which are used in procedures and therapies that are considered elective. Future surges of COVID-19 may result in governmental restrictions being re-implemented to reduce the spread of COVID-19 or patients and healthcare providers otherwise postponing elective eyecare procedures.

Any future impact of the COVID-19 pandemic will depend on future developments that are highly uncertain and cannot be predicted with confidence, and will depend on certain developments, including the duration and severity of the COVID-19 pandemic and its potential variants. Among other things, the COVID-19 pandemic could disrupt the operations of our third-party manufacturers and other suppliers. We are working closely with our manufacturing partners and suppliers to help ensure that we are able to source key components and maintain appropriate inventory levels to meet customer demand. Nevertheless, as occurred in earlier stages of the COVID-19 pandemic, we may, among other things, experience reduced customer demand or constrained supply that could materially adversely impact our business, results of operations, liquidity and cash flows in future periods.

Factors Affecting Our Business and Results of Operations

We believe there are several important factors that have impacted and that will continue to impact our business and results of operations. These factors include, but are limited to:

Product Development

We believe our product development approach is a key differentiator of our team and our company. We are focused on continuous innovation and design and utilize input from our network of expert employees (including several ophthalmologists on staff), advisors and customers to rapidly iterate our pre-and post-commercial product designs with the aim of better satisfying the needs of our customers and their patients, and increasing adoption and utilization of our

63

solutions. Once our products are launched, our customer feedback loop helps us further develop our products. This is particularly evident in the evolution of our OMNI Surgical System, which originated from the combined functionality of two internally developed, commercial predicate devices, each of which had their own multiple commercial iterations. Our future growth is dependent on our ability to continue innovating and applying our expertise of disease physiology to improve existing products and develop new products.

Market Education and Training on the Benefit of our Products vis-à-vis Existing Treatment Alternatives

One of the key drivers of our success is educating ophthalmologists, optometrists, patients, and third-party payors about the clinical and safety benefits of our products and of the benefits of more proactive, interventional approach to treating glaucoma and DED. We believe the required market education and development is best accomplished through a differentiated, highly involved commercial approach. As such, we devote significant resources to onboarding our sales professionals and to continuously augmenting their knowledge and capabilities. Our sales professionals provide ECPs with the necessary education, training and support to adopt and continue to use our products. We believe that increasing acceptance and usage of our products will require continued investment in our sales force and education efforts to ensure ECPs, patients and third-party payors learn more about our products and appreciate our benefits to their target patient populations.

Maximizing Product Usage by Customers

Demand for our products will be highly dependent on our ability to develop their potential addressable markets and maximize the breadth of patients our products can serve. OMNI is indicated for canaloplasty followed by trabeculotomy to reduce IOP in adult patients with POAG in the U.S. and with OAG, in the EU. We believe that OMNI is the only device that is authorized by the FDA as an ab interno procedure to: reduce IOP in adult patients with POAG across the spectrum of disease severity; be used in mild-to-moderate Combination Cataract or Standalone procedures; access 360 degrees of the diseased conventional outflow pathway through a single clear corneal incision; and facilitate two consecutive procedures, canaloplasty and trabeculotomy, to comprehensively treat all three primary points of resistance in the conventional outflow pathway in a single operating room visit. Our ability to establish OMNI as the standard of care for all POAG patients by continuing to grow its adoption and utilization in Combination Cataract procedures and by pioneering the development of the market for interventional standalone procedures will have a substantial impact on our future growth.

We introduced our SION Surgical Instrument in the third quarter of 2022. SION satisfies the American Academy of Ophthalmology definition of goniotomy and is registered with the FDA as a Class I 510(k) exempt device. SION’s bladeless design, micro-engineered and precision manufactured using specialized lasers, excises tissue without cutting. SION grasps and removes diseased tissue as the surgeon sweeps the instrument around Schlemm’s canal with a single smooth motion. The bladeless technology of SION was developed with leading ophthalmic surgeons to improve safety and ease of use by eliminating the need to navigate sharp instrumentation within the eye’s anterior chamber and iridocorneal angle anatomy. SION allows us to serve specific subsets of customers who may prioritize a faster or simpler procedure. Our target customers for SION include three types of combination cataract MIGS surgeons that are distinct from target OMNI customers: 1) high volume cataract surgeons seeking to perform the quickest MIGS procedures, 2) surgeons who are initially less experienced with MIGS such as surgical fellows at academic institutions and 3) surgeons looking for the most cost effective MIGS procedures in facilities that may emphasize procedural profitability. We believe that these use cases have very little overlap with the use cases for our OMNI device. Our ability to establish SION as a product with differentiated ease of use, safety and efficacy will be an important driver of SION’s commercial growth and success.

TearCare is a unique open-eye heating and expression device designed to melt and remove meibomian gland obstructions. We believe TearCare has a compelling physiological profile to address obstruction from meibomian gland disease, or MGD, which is the primary cause of evaporative DED, a disease characterized by low quality tears that evaporate prematurely. The current DED treatment market primarily consists of an abundance of OTC and prescription eyedrops that seek to lubricate the ocular surface, alleviate inflammation and/or increase tear production. However, OTC and prescription eyedrops are incapable of clearing obstructions in the meibomian glands and do not address MGD’s eyelid-borne physiology and poor tear quality. MGD is associated with 86% of DED cases and is a leading root cause of evaporative DED, which is characterized by low quality tears that evaporate prematurely. Clinical studies have demonstrated that treating MGD by liquefying and removing clogged meibum is the most effective method to eliminate obstructions and restore the lipid layer of tear film, thereby preventing premature evaporation of tears. TearCare was designed to be administered during the course of a routine office visit to an ECP, which makes it convenient for patients,

64

and allows providers to maintain procedural throughput in their practices. Our ability to improve patient access and market education on TearCare and the benefits of proactive MGD treatment will be key drivers of TearCare’s future growth.

Operational Excellence and Cost Efficiency

We aim to achieve operating and financial milestones with optimal capital efficiency, and focus on our market value relative to invested capital as a key measurement of our performance. To date, we have raised $402.4 million in net proceeds from equity and debt financings, including $252.2 million from our IPO. With a portion of these net proceeds (our December 31, 2022 cash and equivalents was $185.0 million), we believe we have developed and commercially launched two clinically differentiated products, funded multiple completed and ongoing clinical trials, and built our management team and company infrastructure to support the continued growth of our business. We believe that this level of operational and commercial progress relative to our total capital investment to date compares favorably to medical technology peers. We seek to design products that can achieve attractive long-term gross margins.

Components of Our Results of Operations

Revenue

We currently derive the majority of our U.S. revenue from the sale of OMNI and SION to ASCs and HOPDs and TearCare to ophthalmology and optometry practices. During the years ended December 31, 2022 and 2021, the revenues from our Surgical Glaucoma segment accounted for over 90% of our total revenues. Substantially all of our revenues for both periods were generated from sales within the U.S. Our Surgical Glaucoma customers place orders based on their expected procedure volume and reorder as needed, typically on a biweekly, monthly or bimonthly basis. Our TearCare customers typically purchase a TearCare System which consists of one or more SmartHubs, multiple single-use SmartLids and other accessories. After utilizing their initial inventory, customers can reorder SmartLids as needed. No single customer accounted for 10% or more of our revenue for the years ended December 31, 2022 and 2021.

The growth in our revenue is driven by the demand for elective surgery and treatment utilizing our products. Such demand is often lower during summer months because of ECP vacations and in winter months in certain parts of the world because of fewer business or surgery days due to holidays and adverse weather conditions.

Cost of Goods Sold and Gross Margin

Our products are produced by third-party manufacturers. Our cost of goods sold consists primarily of amounts paid for our products to third-party manufacturers, and our manufacturing overhead costs, which consist primarily of personnel expenses, including salaries, benefits and stock-based compensation, and reserves for excess, obsolete and non-sellable inventory. Cost of goods sold also includes depreciation expenses for production equipment which we provide to our third-party manufacturers and certain direct costs, such as shipping and handling costs.

We calculate gross margin as gross profit divided by revenue. Our gross margin has been and will continue to be affected by a variety of factors, including differences in segment gross margins, changes in average selling prices, product sales mix, production and ordering volumes, manufacturing costs, product yields, and headcount. In general, we expect our gross margins to increase over the long-term to the extent our production and ordering volumes increase and to the extent we spread the fixed portion of our overhead costs over a larger number of units produced. We intend to use our design, engineering and manufacturing know-how and capabilities to further advance and improve the efficiency of our suppliers’ manufacturing processes, which we believe will reduce costs and increase our gross margins. Our gross margins could fluctuate from quarter to quarter as we transition to new suppliers, introduce new products and adopt new manufacturing processes and technologies.

Research and Development Expenses

Research and development ("R&D") expenses consist primarily of engineering, product development, clinical studies to develop and support our products, including clinical trial design, clinical trial site initiation and study costs, internal and external costs associated with our regulatory compliance and quality assurance functions, medical affairs, cost of products used for clinical trials and other costs associated with products and technologies – either new or enhancements of existing platforms – that are in development. These expenses also include personnel expenses, including salaries, benefits and stock-based compensation, supplies, consulting, prototyping, testing, materials, travel expenses, depreciation expenses for equipment and an allocation of IT and facility overhead expenses. Our R&D expenses as a percentage of revenue may vary over time depending on the level and timing of new product development efforts, as well as clinical development, clinical

65

trial and other related activities. We expect our R&D expenses to increase for the next several years as we continue to invest in our active clinical trial program, develop new products and improve our existing products.

Selling, General and Administrative Expenses

Selling, general and administrative ("SG&A") expenses consist primarily of personnel expenses, including salaries, benefits and stock-based compensation related to selling, marketing and corporate functions, allocation of IT and facility overhead expenses, bad debt expense, finance, legal and human resource costs. Other SG&A expenses include training, travel expenses, promotional activities, marketing initiatives, market research and analysis, conferences and trade shows, professional services fees (including external legal, audit, consulting and tax fees), insurance costs, and general corporate expenses.

Interest Expense

Interest expense consists primarily of interest incurred on our outstanding indebtedness and non-cash interest related to the amortization of debt discount and issuance costs associated with our outstanding loan.

Other Income (Expense), Net

Other income (expense), net consists of interest and amortization on held-to-maturity investments in treasury securities, as well as, gains and losses resulting from the remeasurement of the fair value of our redeemable convertible preferred stock warrant liability. The redeemable convertible preferred stock warrants were exercised in 2021 and the final fair value of the warrant liability was reclassified to stockholders’ equity. We will no longer record any related periodic fair value adjustments.

66

Results of Operations

Comparison of the Years Ended December 31, 2022 and 2021

Revenue. Revenue in the year ended December 31, 2022 was $71.3 million, an increase of $22.4 million, or 45.7%, from our revenue in 2021. Surgical Glaucoma and Dry Eye sales contributed $65.6 million and $5.7 million, respectively. The overall increase in Surgical Glaucoma revenue was primarily attributable to a significant increase in the number of OMNI units sold in the year ended December 31, 2022 as a result of growth in the number of facilities ordering OMNI and an increase in unit utilization per ordering facility, as well as the introduction of SION in the third quarter of 2022. Our Dry Eye revenues increased in the year ended December 31, 2022 versus the prior year due to the continued growth in our installed base of facilities that have purchased TearCare. Surgical Glaucoma sales represented 92.0% and 95.0% of our revenue generated in the years ended December 31, 2022 and 2021, respectively.

Cost of Goods Sold and Gross Profit. Cost of goods sold during the year ended December 31, 2022, increased $3.8 million compared to the prior year. The increase was driven by an increase both our Surgical Glaucoma and Dry Eye segments. Dry Eye cost of goods sold increased $1.9 million in the year ended December 31, 2022 over the prior year, which was driven by increased sales activity, as well as by $0.9 million of charges in 2022 associated with a voluntary recall of our SmartHub 1.0 devices. Our Surgical Glaucoma cost of goods sold increased $1.8 million as compared to 2021, which was primarily driven by an increase in sales activity.

Our total gross profit was $59.0 million for the year ended December 31, 2022, an increase of $18.6 million compared to the prior year. Our total gross margin increased from 82.4% to 82.7% from the year ended December 31, 2021 to the year ended December 31, 2022. The increase in gross margin was primarily due to increased sales volume in OMNI units and manufacturing efficiencies. Gross margin in our Surgical Glaucoma segment was 87.4% for the year ended December

67

31, 2022, an increase from 86.1% for the prior year period. In our Dry Eye segment, gross margin increased from 13.1% in 2021, to 29.1% for the year ended December 31, 2022.

Research and Development Expenses. R&D expense for the year ended December 31, 2022 was $22.9 million, an increase of $7.2 million compared to the prior year. The increase was primarily attributable to a $3.9 million increase in personnel expenses as a result of increased headcount, including a $0.9 million increase in stock-based compensation expense. In addition, there was a $2.1 million increase in clinical studies expense and $0.8 million increase in legal expenses incurred.

Selling, General, and Administrative Expenses. SG&A expenses were $120.1 million for the year ended December 31, 2022, an increase of $43.9 million from the prior year comparable period. The increase was attributable to a $27.9 million increase in personnel expenses as a result of increased headcount, which included a $7.0 million increase in stock-based compensation expense. In addition to personnel expense increases, our SG&A expense from 2021 to the 2022 period included a $6.1 million increase in professional services expense, including consulting and legal expenses, a $3.8 million increase in marketing expenses, a $1.9 million increase in training, events, and demos, and a $1.7 million increase in travel expenses.

Interest Expense. Interest expense was consistent during the year ended December 31, 2022 compared to the year ended December 31, 2021.

Other Income (Expense), Net. Other income (expense), net was $2.2 million for the year ended December 31, 2022 as compared to an expense of $6.9 million for the year ended December 31, 2021. The income in the current year is attributable to the amortization of purchase discounts on held-to-maturity cash-equivalent investments. During the related prior year comparable period, the expense relates to the remeasurement of our convertible preferred stock warrants and recognition of the change in fair value. As detailed in the notes to our financial statements included herein, the convertible preferred stock warrants were automatically converted into common stock warrants concurrent with our IPO and subsequently exercised in the third quarter of fiscal year 2021.

Cash Flows

The following table summarizes our cash flows for the periods indicated (in thousands):

Net Cash Used in Operating Activities

Net cash used in operating activities for the year ended December 31, 2022 was $76.0 million, consisting primarily of a net loss of $86.2 million and a net change in our operating assets and liabilities of $5.7 million, partially offset by non-cash charges of $16.0 million. The change in our net operating assets and liabilities was primarily due to a $6.8 million increase in accounts receivable and a $3.3 million increase in inventory to support the continued growth of our operations. The Company had a $0.7 million decrease in accounts payable, while accrued compensation, as well as accrued and other current liabilities, increased $4.0 million, driven by the timing of payments on invoices and bonuses. The non-cash charges primarily consisted of $13.0 million related to stock-based compensation, $0.7 million of depreciation, $0.7 of accretion of debt discount and amortization of debt issuance costs, and $0.5 million of noncash operating lease expense.

Net cash used in operating activities for the year ended December 31, 2021 was $52.5 million, consisting primarily of a net loss of $63.0 million and a net change in our operating assets and liabilities of $4.3 million, partially offset by non-cash charges of $14.7 million. The change in our net operating assets and liabilities was primarily due to a $3.7 million increase in accounts receivable, a $3.0 million increase in our prepaid expenses to support the continued growth of our operations, and a $1.3 million increase in inventory. Partially offsetting those changes was a $1.2 million increase in accounts payable, a $1.9 million increase in accrued compensation, and a $0.3 million increase in accrued and other current liabilities, driven by the timing of payments on invoices and bonuses. The non-cash charges primarily consisted of $6.9

68

million from the fair value remeasurement of our convertible preferred stock warrants, $5.1 million related to stock-based compensation, $0.7 million of accretion of debt discount and amortization of debt issuance costs, $0.6 million in depreciation and amortization, $0.6 million of noncash operating lease expense, and $0.4 million provision for excess and obsolete inventories.

Net Cash Used in Investing Activities

Net cash used in investing activities in the years ended December 31, 2022 and 2021 was $1.0 and $0.8 million, consisting of purchases of property and equipment.

Net Cash Provided by (Used in) Financing Activities

Net cash provided by financing activities in the year ended December 31, 2022 of $1.2 million primarily relates to proceeds from the exercise of common stock options and proceeds from employee stock purchase plan purchases.

Net cash provided by financing activities in the year ended December 31, 2021 of $252.5 million primarily relates to proceeds from the issuance of common stock, net of related offering costs, of $252.2 million.

Liquidity and Capital Resources

Sources of Liquidity

To date, our primary sources of capital have been private placements of redeemable convertible preferred stock, debt financing agreements, the sale of common stock in our IPO, and revenue from the sale of our products. Since our inception, we have raised an aggregate of approximately $402.4 million in net proceeds from sales of our redeemable convertible preferred stock and common stock and borrowed $32.9 million of net proceeds under our term loans.

As of December 31, 2022, we had cash and cash equivalents of $185.0 million, an accumulated deficit of $239.2 million and $35.0 million outstanding under our term loan agreement (before debt discount). Based on our current planned operations, we expect our cash and cash equivalents and additional borrowings available under the 2020 Term Loan and the 2020 Revolver will enable us to fund our operations for at least the next twelve months and the foreseeable future.

MidCap Loan Agreements

In January 2019, we entered into credit and security agreements with MidCap Financial Services (the "Lender"), which provided a maximum of $25.0 million credit facility consisting of a $20.0 million senior secured term loan (the "2019 Term Loan") and a $5.0 million 2019 revolving loan (the "2019 Revolver" and collectively with the 2019 Term Loan, the “2019 MidCap Credit Facility”). In November 2020, we entered into amended and restated credit and security agreements with the same institution, which replaced the 2019 MidCap Credit Facility, and provided for a maximum of $40.0 million credit facility consisting of a $35.0 million senior secured term loan (the "2020 Term Loan") and a $5.0 million revolving loan (the "2020 Revolver and collectively with the 2020 Term Loan, the “2020 MidCap Credit Facility”).

Our obligations under the 2020 MidCap Credit Facility are guaranteed by us and our future subsidiaries, subject to exceptions for certain foreign subsidiaries. Our obligations under the agreements are secured by substantially all of our assets, including our material intellectual property. Additionally, we are subject to customary affirmative and negative covenants, including covenants that limit or restrict the ability of us to, among other things, incur indebtedness, grant liens, merge or consolidate, make investments, dispose of assets, make acquisitions, pay dividends or make distributions, repurchase stock and enter into certain transactions with affiliates, in each case subject to certain exceptions. As of December 31, 2022, we were in compliance with all financial and non-financial covenants.

The 2019 MidCap Credit Facility and 2020 MidCap Credit Facility each contain events of default that include, among others, non-payment of principal, interest or fees, breach of covenants, inaccuracy of representations and warranties, cross-defaults and bankruptcy and insolvency events.

2020 Term Loan

The 2020 Term Loan agreement amended the maturity date to November 1, 2025 and adjusted the stated floating interest rate to reserve-adjusted SOFR, plus 7.00%. Outstanding principal amounts of Tranche One Loans and Tranche Two Loans borrowed under the 2019 Term Loan were designated as Tranche One Loans and Tranche Two Loans under the

69

2020 Term Loan. The Tranche Three Loan commitment amount was increased to $21.0 million and the full amount was drawn in November 2020. Principal payments under the 2020 Term Loan have been extended and are scheduled to begin in December 2023. However, if certain conditions are met, the initiation of principal payments can be delayed to December 2024. We currently expect that we will be in a position to meet the conditions necessary to extend the commencement date for the initiation of principal payments under the 2020 Term Loan from December 1, 2023 to December 1, 2024. In addition, the final payment fee was amended to 6.0%. We are subject to certain financial and non-financial covenants.

We incurred $0.7 million of issuance costs in conjunction with the 2020 Term Loan which were netted against the borrowed funds in the balance sheet and are being accreted using the effective interest method as interest expense over the contractual period of five years.

In conjunction with the funding of the 2020 Term Loan, we issued a 10-year warrant to the Lender to purchase 300,000 shares of our Series F redeemable convertible preferred stock at an exercise price of $21.88 per share, or the 2020 MidCap Warrant, with the estimated fair value of $1.8 million. The 2020 MidCap Warrants were recorded at the fair value as a debt discount and as a warrant liability. The debt discount is being accreted using the effective interest method as interest expense over the contractual period of four years for the 2020 Term Loan.

2020 Revolver

The maturity date of the 2020 Revolver was amended to November 1, 2025 and the stated floating interest rate was adjusted to reserve-adjusted SOFR plus 7.00%. As of December 31, 2022, $5.0 million was available to be drawn under the 2020 Revolver which remains undrawn. Other key terms of the 2020 Revolver remained substantially unchanged compared to those of 2019 Revolver.

Lease Agreements

Our corporate headquarters are located in Menlo Park, California, where we lease approximately 11,000 square feet of office, research and development, engineering and laboratory space pursuant to a lease that commenced on August 1, 2021, and expires on August 31, 2024. We also lease approximately 2,040 square feet of office space, which is primarily used by our commercial leadership team, in Southlake, Texas, pursuant to a lease that commenced on April 30, 2019 and expires on May 15, 2024.

Critical Accounting Estimates

Our financial statements have been prepared in accordance with U.S. generally accepted accounting principles, or GAAP. The preparation of these financial statements requires us to make estimates and assumptions for the reported amounts of assets, liabilities, revenue, expenses and related disclosures. Our estimates are based on our historical experience and on various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions and any such differences may be material.

While our significant accounting policies are more fully described in Note 2 to our financial statements included elsewhere in this Annual Report on Form 10-K, we believe the following discussion addresses our most critical accounting policies, which are those that are most important to our financial condition and results of operations and require our most difficult, subjective and complex judgments.

Stock-Based Compensation

We maintain an equity incentive plan that permits the grant of share-based awards, such as stock options and restricted stock units (RSUs), to employees and directors. We recognize equity-based compensation expense for awards of equity instruments based on the grant date fair value of those awards. We estimate the fair value of our stock option awards made to employees and directors based on the estimated fair values as of the grant date using the Black-Scholes option-pricing model, net of estimated forfeitures. The model requires us to make a number of assumptions, including expected volatility, expected term, risk-free interest rate, and expected dividend yield.

The fair value of restricted stock unit ("RSU") awards is determined based on the number of units granted and the closing price of the Company's common stock as of the grant date. We expense the fair value of our equity-based

70

compensation awards on a straight-line basis over the requisite service period, which is the period in which the related services are received.

Recent Accounting Pronouncements

See Note 2 to our consolidated financial statements appearing under Part II, Item 8 for more information about recent accounting pronouncements, the timing of their adoption, and our assessment.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Not applicable.

71

Item 8. Financial Statements and Supplementary Data.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

72

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the stockholders and the Board of Directors of Sight Sciences, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Sight Sciences, Inc. and subsidiaries (the "Company") as of December 31, 2022 and 2021, the related consolidated statements of operations and comprehensive loss, stockholders' equity, and cash flows, for each of the two years in the period ended December 31, 2022, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2022 and 2021, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2022, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ DELOITTE & TOUCHE LLP

San Jose, California

March 16, 2023

We have served as the Company’s auditor since 2019.

73

SIGHT SCIENCES, INC.

Consolidated Balance Sheets

(in thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

74

SIGHT SCIENCES, INC.

Consolidated Statements of Operations and Comprehensive Loss

(in thousands)

The accompanying notes are an integral part of these consolidated financial statements.

75

SIGHT SCIENCES, INC.

Consolidated Statements of Stockholders’ Equity

(in thousands, except share data)

The accompanying notes are an integral part of these consolidated financial statements.

76

SIGHT SCIENCES, INC.

Consolidated Statements of Cash Flows

(in thousands)