SIGMA ADDITIVE SOLUTIONS, INC. - Quarter Report: 2016 September (Form 10-Q)

Form 10-Q Quarterly Report

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

X .

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 30, 2016

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number: 033-02783-S

Sigma Labs, Inc.

(Exact name of registrant as specified in its charter)

NEVADA

27-1865814

(State or other jurisdiction of incorporation or

organization)

(IRS Employer Identification No.)

3900 Paseo del Sol

Santa Fe, NM 87507

(Address of principal executive offices)

(505) 438-2576

(Registrant’s telephone number)

(Former Name or Former Address, if Changed Since Last Report

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes X . No .

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes X . No .

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company.


Large accelerated filer	.	Accelerated Filer	.
Non-accelerated filer	.	Smaller reporting company	X .

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes . No X .

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: As of November 14, 2016, the issuer had 6,267,577 shares of common stock outstanding.

SIGMA LABS, INC.

For the quarter ended September 30, 2016

FORM 10-Q

TABLE OF CONTENTS



PART I

ITEM 1. FINANCIAL STATEMENTS	3

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	9

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK	15

ITEM 4. CONTROLS AND PROCEDURES	15

PART II

ITEM 1. LEGAL PROCEEDINGS	16

ITEM 1A. RISK FACTORS	16

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS.	16

ITEM 3. DEFAULTS UPON SENIOR SECURITIES	16

ITEM 4. MINE SAFETY DISCLOSURES	16

ITEM 5. OTHER INFORMATION	16

ITEM 6. EXHIBITS	17

SIGNATURES	18

PART I

ITEM 1. FINANCIAL STATEMENTS.


Sigma Labs, Inc.
Condensed Balance Sheets
(Unaudited)

		September 30, 2016		December 31, 2015

ASSETS
Current Assets
Cash	$	137,702	$	1,539,809
Accounts Receivable, net		119,599		280,222
Inventory		84,659		20,129
Prepaid Assets		34,097		38,687
Total Current Assets		376,057		1,878,847


Other Assets
Property and Equipment, net		609,782		714,754
Intangible Assets, net		222,674		167,644
Investment in Joint Venture		500		9,222
Prepaid Stock Compensation		208,848		418,547
Total Other Assets		1,041,804		1,310,167

TOTAL ASSETS	$	1,417,861	$	3,189,014

LIABILITIES AND STOCKHOLDERS' EQUITY
Current Liabilities
Accounts Payable	$	143,217	$	38,393
Accrued Expenses		96,322		71,523
Total Current Liabilities		239,539		109,916

TOTAL LIABILITIES		239,539		109,916

Stockholders' Equity
Preferred Stock, $0.001 par; 10,000,000 shares authorized; None issued and outstanding		-		-
Common Stock, $0.001 par; 15,000,000 shares authorized; 6,267,577 and 6,239,073 issued and outstanding at September 30, 2016 and December 31, 2015, respectively		6,268		6,239
Additional Paid-In Capital		10,668,007		10,636,979
Accumulated Deficit		(9,495,953)		(7,564,120)
Total Stockholders' Equity		1,178,322		3,079,098

TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY	$	1,417,861	$	3,189,014

The accompanying notes are an integral part of these condensed financial statements.


Sigma Labs, Inc.
Condensed Statements of Operations
(Unaudited)

		Three Months Ended				Nine Months Ended
		September 30, 2016		September 30, 2015		September 30, 2016		September 30, 2015

INCOME
Services	$	189,951	$	266,566	$	642,230	$	648,515
Total Revenue		189,951		266,566		642,230		648,515

COST OF SERVICE REVENUE		69,259		25,250		207,744		138,379

GROSS PROFIT		120,693		241,316		434,486		510,136

EXPENSES
Other General and Administration		437,873		293,187		1,345,576		886,965
Payroll Expense		259,011		191,399		727,494		338,533
Stock-Based Compensation		105,630		221,500		236,554		478,500
Research and Development		37,532		122,517		88,504		206,545
Total Expenses		840,046		828,603		2,398,128		1,910,543

OTHER INCOME (EXPENSE)
Interest Income		35		265		288		1,137
Other Income		-		-		31,626		-
Loss on Investment in Joint Venture		(3)		(108)		(105)		(108)
Total Other Income (Expense)		32		157		31,809		1,029

LOSS BEFORE INCOME TAXES		(719,320)		(587,130)		(1,931,833)		(1,399,378)

Provision for income Taxes		-		-		-		-

Net Loss	$	(719,320)	$	(587,130)	$	(1,931,833)	$	(1,399,378)

Loss per Common Share - Basic and Diluted	$	(0.11)	$	(0.09)	$	(0.31)	$	(0.22)

Weighted Average Number of Shares
Outstanding - Basic and Diluted		6,259,349		6,234,834		6,243,642		6,224,939

The accompanying notes are an integral part of these condensed financial statements.


Sigma Labs, Inc. and Subsidiaries
Condensed Statements of Cash Flows
(Unaudited)

		Nine Months Ended		Nine Months Ended
		September 30, 2016		September 30, 2015

OPERATING ACTIVITIES
Net Loss	$	(1,931,833)	$	(1,399,378)
Adjustments to reconcile Net Income (Loss) to Net Cash provided (used) by operations:
Noncash Expenses:
Amortization		6,526		1,731
Depreciation		131,879		123,205
Stock Compensation		240,756		478,500
Change in assets and liabilities:
Accounts Receivable		160,623		(55,107)
Allowance for Doubtful Accounts		-		(4,884)
Inventory		(64,530)		(55,678)
Prepaid Assets		4,590		20,709
Accounts Payable		104,824		(227,508)
Customer Deposits		-		62,393
Accrued Expenses		24,799		17,024
NET CASH USED BY OPERATING ACTIVITIES		(1,322,366)		(1,038,993)

INVESTING ACTIVITIES
Purchase of Furniture and Equipment		(26,907)		(64,334)
Purchase of Intangible Assets		(61,556)		(11,995)
Investment in Joint Venture		8,617		(10,000)
Loss on Investment in Joint Venture		105		108
NET CASH USED BY INVESTING ACTIVITIES		(79,741)		(86,221)

NET CASH DECREASE FOR PERIOD		(1,402,107)		(1,125,214)

CASH AT BEGINNING OF PERIOD		1,539,809		2,962,069

CASH AT END OF PERIOD	$	137,702	$	1,836,855

Supplemental Disclosure for Cash Flow Information:
Cash paid during the period for:
Interest	$	-	$	-
Income Taxes	$	-	$	-

Supplemental Schedule of Noncash Investing and Financing Activities:

Issuance of Common Stock for services	$	152,265	$	225,189

The accompanying notes are an integral part of these condensed financial statements.

SIGMA LABS, INC.

NOTES TO UNAUDITED CONDENSED FINANCIAL STATEMENTS

September 30, 2016

NOTE 1 – Summary of Significant Accounting Policies

Nature of Business – On September 13, 2010 Sigma Labs, Inc., formerly named Framewaves, Inc., a Nevada corporation, acquired 100% of the shares of B6 Sigma, Inc. by exchanging 6.67 shares of Framewaves, Inc. restricted common stock for each issued and outstanding share of B6 Sigma, Inc. The acquisition has been accounted for as a “reverse purchase” and, accordingly, the operations of Framewaves, Inc. prior to the date of acquisition have been eliminated. Unless otherwise indicated or the context otherwise requires, the term “B6 Sigma” refers to B6 Sigma, Inc., a Delaware corporation, which, until the short-form merger referenced below, was our wholly-owned, operating company acquired in September 2010; the terms the “Company,” “Sigma,” “we,” “us” and “our” refer to Sigma Labs, Inc., together with B6 Sigma, Inc. Prior to December 29, 2015, we conducted substantially all of our operations through B6 Sigma. On December 29, 2015, we completed a short-form merger of B6 Sigma into Sigma. As a result, B6 Sigma became part of Sigma and no longer exists as a subsidiary.

B6 Sigma, Inc., incorporated February 5, 2010, was founded by a group of scientists, engineers and businessmen to develop and commercialize novel and unique manufacturing and materials technologies. The Company believes that some of these technologies will fundamentally redefine conventional quality assurance and process control practices by embedding them into the manufacturing processes in real time, enabling process intervention and ultimately leading to closed loop process control. The Company anticipates that its core technologies will allow its clientele to combine advanced manufacturing quality assurance and process control protocols with novel materials to achieve breakthrough product potential in many industries including aerospace and defense manufacturing, oil and gas and energy manufacturing, bio-medical manufacturing, automotive manufacturing, and other markets such as firearms and recreational equipment.

Basis of Presentation – The accompanying financial statements have been prepared by the Company in accordance with Article 8 of U.S. Securities and Exchange Commission Regulation S-X. In the opinion of management, all adjustments (which include only normal recurring adjustments) necessary to present fairly the financial position, results of operations and cash flows at September 30, 2016 and 2015 and for the periods then ended have been made. Certain information and footnote disclosures normally included in financial statements prepared in accordance with U.S. generally accepted accounting principles have been condensed or omitted. The Company suggests these condensed financial statements be read in conjunction with the December 31, 2015 audited financial statements and notes thereto included in the Company’s Form 10-K. The results of operations for the periods ended September 30, 2016 and 2015 are not necessarily indicative of the operating results for the full year.

Reclassification – Certain amounts in prior-period financial statements have been reclassified for comparative purposes to conform to presentation in the current-period financial statements.

Loss Per Share – The computation of loss per share is based on the weighted average number of shares outstanding during the period in accordance with ASC Topic No. 260, “Earnings Per Share.”

Recently Enacted Accounting Standards – The FASB established the Accounting Standards Codification (“Codification” or “ASC”) as the source of authoritative accounting principles recognized by the FASB to be applied by nongovernmental entities in the preparation of financial statements in accordance with generally accepted accounting principles in the United States (“GAAP”). Rules and interpretive releases of the Securities and Exchange Commission (“SEC”) issued under authority of federal securities laws are also sources of GAAP for SEC registrants.

Recent Accounting Standards Updates (“ASU”) through ASU No. 2015-01 contain technical corrections to existing guidance or affects guidance to specialized industries or situations. The Company has evaluated recently issued technical pronouncements and has determined that these updates have no current applicability to the Company or their effect on the financial statements would not have been significant.

Accounting Estimates - The preparation of financial statements in conformity with generally accepted accounting principles in the United States requires management to make estimates and assumptions that affect certain reported amounts of assets and liabilities, the disclosures of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimated by management. Significant accounting estimates that may materially change in the near future are impairment of long-lived assets, values of stock compensation awards and stock equivalents granted as offering costs, and allowance for bad debts and inventory obsolescence.

NOTE 2 – Stockholders’ Equity

Common Stock

Effective March 17, 2016, our Amended and Restated Articles of Incorporation were amended pursuant to a Certificate of Change Pursuant to Nevada Revised Statutes 78.209 (the “Certificate of Change”) filed with the Nevada Secretary of State. The Certificate of Change provided for both a reverse stock split of the outstanding shares of our common stock on a 1-for-100 basis (the “Reverse Stock Split”), and a corresponding decrease in the number of shares of our common stock that we are authorized to issue (the “Share Decrease”).

As a result of the Reverse Stock Split, the number of issued and outstanding shares of our common stock decreased from 622,969,835 pre-Reverse Stock Split shares to 6,229,710 post-Reverse Stock Split shares (after adjustment for any fractional shares). Pursuant to the Share Decrease, the number of authorized shares of our common stock decreased from 750,000,000 to 7,500,000 shares of common stock. All amounts shown for common stock included in these financial statements are presented post-Reverse Stock Split.

On April 28, 2016, the Company's Amended and Restated Articles of Incorporation were amended to increase the number of authorized shares of the Company's common stock from 7,500,000 to 15,000,000 shares of common stock. As of September 30, 2016, the Company had 15,000,000 shares of authorized common stock, $0.001 par value per share.

In February 2016, the Company issued 625 shares of common stock to a new employee, valued at $4.82 per share, or $3,012.

In March 2016, the Company issued 3,080 shares of common stock to a consultant, valued at $4.87 per share, or $14,999.

In April 2016, the Company issued 3,529 shares of common stock to a consultant, valued at $4.25 per share, or $15,000.

In May 2016, the Company issued 2,459 shares of common stock to a consultant, valued at $3.05 per share, or $7,499.

In June 2016, the Company issued 2,515 shares of common stock to a consultant, valued at $2.982 per share, or $7,498.

In July 2016, the Company issued 4,167 shares of common stock to a consultant, valued at $3.00 per share, or $12,501.

In July 2016, the Company issued 31,000 shares of common stock to an employee, valued at $2.97 per share, or $91,760.

As of September 30, 2016, there were 6,267,577 shares of common stock issued and outstanding, including 62,250 issued but unvested shares pursuant to the Company's 2011 Equity Incentive Plan (the “2011 Plan”) and the Company's 2013 Equity Incentive Plan (the “2013 Plan”). As of December 31, 2015, there were 6,239,073 shares of common stock issued and outstanding, including 12,500 and 32,500 issued but unvested shares pursuant to the 2011 Plan and the 2013 Plan. On April 28, 2016, at the Annual Meeting of Stockholders of the Company, the Company's stockholders approved an amendment to the 2013 Plan to increase the number of shares of the Company's common stock reserved for issuance under the 2013 Plan by 638,538 shares of our common stock to a total of 750,000 shares (on a post-Reverse Stock Split basis). As of September 30, 2016, an aggregate of 1,500 shares and 601,712 shares of common stock were reserved for issuance under the 2011 Plan and the 2013 Plan, respectively.

Stock Options

During 2016, the Company granted a total of 137,375 options to nine employees with vesting periods ranging from three to four years beginning November 17, 2016. As of September 30, 2016, stock option compensation expense of $136,787 was recognized during the nine months ended September 30, 2016 for these options and other options granted in 2015. The weighted average period over which total the compensation cost of the options of $660,500 ($327,504 in 2015) will be recognized is 3.02 years. The weighted average exercise price of all options is $4.21 and the weighted average fair value of the options on the grant dates was $3.23. The estimated fair value of the options was determined using the Black-Scholes pricing model using the following assumptions:

Expected term:

5 - 10 years

Volatility:

67.3 - 81.7%

Dividend yield:

0.00%

Risk-free interest rate:

1.13 - 2.32%

Warrants

As of September 30, 2016, the Company had no outstanding warrants.

NOTE 3 - Continuing Operations

The Company has sustained losses and has negative cash flows from operating activities since its inception. However, the Company has had increasing revenues in recent periods. In addition, the Company has raised significant equity capital and is currently developing new product lines to increase future revenues. The Company believes it has adequate working capital and cash to fund operations through 2016, and has entered into significant revenue contracts that are expected to generate cash flow in the near term.

NOTE 4 – Loss Per Share

The following data show the amounts used in computing loss per share and the weighted average number of shares of dilutive potential common stock for the periods ended September 30, 2016 and 2015:


	Three Months Ending				Nine Months Ending
	Sept. 30, 2016		Sept. 30, 2015		Sept. 30, 2016		Sept. 30, 2015

Loss from continuing
Operations available to
Common stockholders (numerator)	$	(719,320)	$	(587,130)	$	(1,931,833)	$	(1,399,378)

Weighted average number of
common shares Outstanding
used in loss per share during
the Period (denominator)		6,259,349		6,234,834		6,243,642		6,224,939

Dilutive loss per share was not presented as the Company had no common equivalent shares for all periods presented that would affect the computation of diluted loss per share or its effect is anti-dilutive.

NOTE 5 – Subsequent Events

Effective October 17, 2016, the Company entered into a Securities Purchase Agreement with two accredited investors (the “Investors”) for the private placement by the Company of Secured Convertibles Notes in the aggregate principal amount of $1,000,000 (the "Notes") and warrants (the "Warrants") to purchase up to 160,000 shares (the "Warrant Shares") of the Company's common stock ("Common Stock") (subject to adjustment in certain circumstances), for aggregate gross proceeds, before expenses, to the Company of $900,000 (the “Financing Transaction”). The closing of the Financing Transaction (the “Closing”) occurred on October 19, 2016.

In connection with the Financing Transaction, the Company entered into a Registration Rights Agreement, dated October 17, 2016, with the Investors (the “Registration Rights Agreement”), pursuant to which the Company agreed to file a registration statement related to the Financing Transaction with the Securities and Exchange Commission (“SEC”) covering the resale of (i) the shares of Common Stock that will be issued to the Investors upon conversion of the Notes (the "Conversion Shares"), and (ii) the Warrant Shares that will be issued to the Investors upon exercise of the Warrants. The Notes are secured by the assets of the Company pursuant to a Security Agreement, dated October 17, 2016, between the Company and the "collateral agent" (as defined in the Notes) for the benefit of itself and each of the Investors.

Each Warrant has an initial exercise price equal to the lesser of (i) the final unit price of the Company’s proposed public offering initially filed with the SEC on July 28, 2016, and (ii) 150% of the closing price of the Common Stock as reported by the OTC Markets Group, Inc. on the date of issuance of the Warrants (subject to adjustment as provided therein), which Warrants may be exercised on a cashless basis as provided in the Warrants.

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Forward-looking statements

This Quarterly Report, including any documents which may be incorporated by reference into this Report, contains “Forward-Looking Statements.” All statements other than statements of historical fact are “Forward-Looking Statements” for purposes of these provisions, including any projections of revenue or other financial items, any statements of the plans and objectives of management for future operations, any statements concerning proposed new products or services, any statements regarding future economic conditions or performance, and any statements of assumptions underlying any of the foregoing. All Forward-Looking Statements included in this document are made as of the date hereof and are based on information available to us as of such date. We assume no obligation to update any Forward-Looking Statement. In some cases, Forward-Looking Statements can be identified by the use of terminology such as “may,” “will,” “expects,” “plans,” “anticipates,” “intends,” “believes,” “estimates,” “potential,” or “continue,” or the negative thereof or other comparable terminology. Although we believe that the expectations reflected in the Forward-Looking Statements contained herein are reasonable, there can be no assurance that such expectations or any of the Forward-Looking Statements will prove to be correct, and actual results could differ materially from those projected or assumed in the Forward-Looking Statements. Future financial condition and results of operations, as well as any Forward-Looking Statements are subject to inherent risks and uncertainties, including any other factors referred to in our press releases and reports filed with the Securities and Exchange Commission ("SEC"). All subsequent Forward-Looking Statements attributable to the Company or persons acting on its behalf are expressly qualified in their entirety by these cautionary statements. Additional factors that may have a direct bearing on our operating results are described under the caption “Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2015 and elsewhere in this report.

Overview

Sigma Labs, Inc. (the "Company," "we," "us," or "Sigma") is a software company that has developed quality assurance software known as PrintRite3D®, which Sigma believes solves the major problems that have prevented large-scale metal part production using 3D printers. GE Aviation, for example, has stated that it plans to commit $3.5 billion by 2020 to, among other things, build a metal 3D production facility for its Leap engine and other engines to produce the applicable 3D printed parts. However, without companies like GE Aviation effectively being able to check each part for shape, density, strength and consistency in-process during the manufacturing process, we believe that such companies will not be able to address the major problems currently preventing large-scale metal 3D production. We believe that our software, which is positioned “inside” the 3D metal printer, solves these problems by assuring each part is being made to the specifications of the computer file as it is being made. We enable 3D prototyping to become 3D manufacturing. Instead of performing quality assurance (“QA”) post production, our PrintRite3D® software could fundamentally redefine conventional QA by embedding quality assurance and process control into the manufacturing process in real time. We have filed patent applications directed to our In-Process Quality Assurance™ (“IPQA®”) procedure for advanced manufacturing. In addition, we anticipate that our core PrintRite3D® software will enable our customers to combine their advanced manufacturing technologies with our 3D manufacturing QA to achieve both cost savings and stronger parts. Vertical markets that we believe would benefit from our technology and software include aerospace, defense, bio-medical, power generation, and oil & gas industries. We provide our software products to customers in the form of Software as a Service (“SaaS”).

About 3D Printing

3D printing (“3DP”) or additive manufacturing (“AM”) is changing the world by going directly from computer graphics to real parts. 3D printing has been applied to the manufacture of plastic parts for several years. 3D manufacturing of metal parts involves directing a laser or other energy source at a layer of powdered metal and melting it. These layers become melted together from the bottom up. Revenues attributable to 3D manufacturing for metal products are estimated to be between $4 and $6 billion by 2020. (Wohlers Report 2015, 3D Printing and Additive Manufacturing State of the Industry – Annual Worldwide Progress Report).

The application of 3D printing to high-tolerance, precision manufactured metal parts has only recently emerged. 3D printing of metal parts today represents only a minor percentage of all 3D manufacturing. However, we believe the greatest future growth for 3D printing appears to be in metal parts given the interest and investment being made by Fortune 100 companies, Federal government laboratories and agencies as well as university-based institutions. Emphasis from these high-end manufacturers and technology leaders is strongly focused on quality and precision manufacturing for high-tolerance parts. We believe the on-going success of 3D printing for metal parts will be highly dependent upon the quality assurance procedure used such as our PrintRite3D® methodology.

About Quality Assurance in 3D Printing

Current methods for providing quality are cost prohibitive because up to 25% of parts produced by 3D printing need to be destroyed in the post-production quality control process. Additional costs are incurred by using non-traditional x-ray scanning technology on these parts. We offer our clients the ability to use in-process sensors to track each layer, and our software continuously analyzes the part so that when it is finished we know if it is production quality. We believe our PrintRite3D® software could reduce inspection costs by a factor of 10 and development time for new parts by 50% or more.

By using PrintRite3D® software, a high-precision manufacturer would have the ability to offer its customers, on an exclusive basis, product guarantees and assurances that its product was produced in compliance with stringent quality requirements. Initial orders have been received from GE Aviation, Honeywell Aerospace, Aeroject Rocketdyne, Woodward and Siemens.

We believe there is potential for our PrintRite3D® software to be incorporated into a majority of 3D metal printing devices made by companies like Electro-Optical Systems (“EOS”), Additive Industries, Concept Lasers and others.

Sigma’s Cloud-Based IIoT Solutions

The process of making a 3D printed part could start with our customers loading a CAD/CAM model of the part into the Cloud shown in “A” in Figure 1. Next, instructions are sent to the 3D printer (see “B”, as shown in Figure 1). Metal powder in the machine is then deposited onto the build platform where a laser beam or other energy source focused onto the build platform melts each successive layer of powder in 20-50 micron increments. Our sensors (see “C” in Figure 1) detect, record, analyze and compare the part as it is being made layer-by-layer against the CAD/CAM specifications and physical reference points for quality assurance during the manufacturing. Our software certifies the shape, strength, and internal density of each part, which eliminates the need to: (1) destroy a large percentage of the parts during process validation and in post-production quality assurance; and (2) retain all of the metal as opposed to cutting pieces and wasting metal.

Our PrintRite3D® web-based software (see “D” in Figure 1) is being designed to reside in the Cloud (see “A” in Figure 1) of the Industrial Internet of Things (“IIoT”). We enable manufacturing engineers to assure the part quality layer-by-layer, provide for manufacturing statistical process control and harvest, aggregate, and analyze Big Data from the manufacturing in-process data collected from our SENSORPAK™ (see “C” in Figure 1), as well as post-process manufacturing data collected by our customers (see “E” in Figure 1).

Our specialized sensor suite (see “C” in Figure 1), known as SENSORPAK™, is an IIoT-compliant computing device. It contains the modular hardware and software necessary to connect to “cyber-physical” objects (see “B” in Figure 1) living on the manufacturing floor. It allows for bi-directional information flow between the manufacturing floor and the Cloud (see “A” in Figure 1). It starts a million-fold data reduction that finishes with our PrintRite3D® software, which provides customers with product guarantees and assurances that parts were produced in compliance with stringent quality standards. It can collect, analyze, aggregate, filter, and then further communicate data from the manufacturing floor to the Cloud (see “A” in Figure 1) and enable links to other areas (see “F” in Figure 1) of the IIoT.

[f10q093016_10q001.jpg]

Figure 1. Sigma’s Industrial IoT / PrintRite 3D® Cloud Architecture

Business Activities and Industry Applications

Our principal business activities include the continued development and commercialization of our PrintRite3D® suite of software, with our main focus currently on the 3DP and the AM industry as well as making operational the contract additive manufacturing business for metal 3DP. Our strategy is to continue to leverage our advanced manufacturing knowledge, experience and capabilities through the following means:

Identify, develop and commercialize our quality assurance software Apps for advanced manufacturing technologies designed to assure part quality in real time as the part is being made and improve process control practices for a variety of industries;

Provide manufacturing process engineering consulting services in respect of our PrintRite3D® quality assurance software Apps for advanced manufacturing to customers that have needs in developing next-generation technologies for advanced manufacturing technologies; and

Build and run a contract manufacturing division for metal 3DP beginning with our EOS M290 state-of-the-art metal printer.

We are presently engaged in the following industry sectors:

Aerospace and defense manufacturing; and

Energy and power generation.

We also seek to be engaged in the following industry sectors and have begun to develop relationships with leading manufacturers in each such sector:

Bio-medical manufacturing;

Automotive manufacturing; and

Other markets such as firearms and recreational equipment.

We generate revenues through PrintRite3D® hardware and sensor sales and software licensing of our PrintRite3D® technology to customers that seek to improve their manufacturing processes, and through ongoing annual software upgrades and maintenance fees. Additionally, we generate revenues from our contract manufacturing activities in metal AM. By running a contract AM services operation, we are able to understand the current needs of our customers and where they are going with their next-generation product development efforts. Contract AM further allows us a means for continuing/self-funding our IPQA®-enabled R&D and product development activities for PrintRite3D®. We provide our AM contract manufacturing services to customers in the form of Quality as a Service (“QaaS”). Starting with our PrintRite3D® cloud-based SaaS model, customers will contract with us to generate and establish a digital quality record (“DQR”) for AM built parts. Each DQR is cloud-based and allows for archiving and storage of quality data, access to our big data ANALYTICS™ software App for continuous quality monitoring and improvement, and automatic industry benchmarking while maintaining firewalls between company-specific data.

In late 2015, we launched two programs − an Early Adopter Program (“EAP”) and an Original Equipment Manufacturer (“OEM”) Partner Program − designed to broaden our market presence and speed adoption of our PrintRite3D® technology. The EAP was designed to attract early adopter customers who have an existing, installed base of 3D metal printers and to offer them incentivized pricing in return for feedback on initial and beta releases of our PrintRite3D® software Apps. Our OEM Partner Program was specifically designed for AM machine manufacturers seeking to embed our PrintRite3D® quality assurance software Apps directly into their machines for customers purchasing a turnkey solution for their new AM machine purchases.

We possess the resident expertise to provide manufacturing materials & process (M&P) engineering services and support to companies using our PrintRite3D® software Apps for metal AM. Accordingly, in addition to our primary business focus, we intend to generate revenues by providing such manufacturing M&P engineering services and support to businesses licensing our PrintRite3D® software Apps.

Corporate Information

Our principal executive offices are located at 3900 Paseo del Sol, Santa Fe, New Mexico 87507, and our current telephone number at that address is (505) 438-2576. Our website address is www.sigmalabsinc.com. The Company’s annual reports, quarterly reports, current reports on Form 8-K and amendments to such reports filed or furnished pursuant to section 13(a) or 15(d) of the Exchange Act, and other information related to the Company, are available, free of charge, on that website as soon as we electronically file those documents with, or otherwise furnish them to, the SEC. The Company’s website and the information contained therein, or connected thereto, are not and are not intended to be incorporated into this Quarterly Report on Form 10-Q.

We incorporated as Messidor Limited in Nevada on December 23, 1985 and changed our name to Framewaves Inc. in 2001. On September 27, 2010, we changed our name from Framewaves Inc. to Sigma Labs, Inc.

Recent Developments (in reverse chronological order)

On November 14, 2016, we announced that we entered into an agreement with Siemens Industrial Turbomachinery AB (“SIT”) of Finspång, Sweden, a unit of Siemens AG (SIEGn.DE), for PrintRite3D® INSPECT® to be installed on a metal printer for evaluation and testing purposes. Specifically, we will installed our PrintRite3D® technology at SIT in Finspong, Sweden. SIT provides the world with gas turbines and gas turbine based solutions for the sustainable and cost efficient production of electricity, steam and heat. In February 2016, SIT opened a dedicated workshop for additive manufacturing, development and repairs. The facility specializes in making turbomachinery components for high temperature applications, where accuracy and quality are critical to ensure operational performance. Siemens is a pioneer in the use of Selective Laser Melting (SLM) technology for the manufacture of high-performance metal parts.

On October 20, 2016, we announced that we closed on October 19, 2016 a private placement by the Company of Secured Convertible Notes in the aggregate principal amount of $1,000,000 (the "Notes") and three-year warrants to purchase up to 160,000 shares of the Company's common stock (the "Warrants"), under a Securities Purchase Agreement with certain accredited investors. Aggregate gross proceeds, before expenses, to the Company were $900,000.

On September 29, 2016, we announced receipt of a contract from Honeywell Aerospace under the previously-announced “America Makes” additive manufacturing (“AM”) research project with GE Aviation. The program, funded by the National Additive Manufacturing Innovation Institute (NAMII), uses our proprietary In-Process Quality Assurance™ (IPQA®) software for advanced AM monitoring and inspection. Under this contract, Sigma and Honeywell will further demonstrate the benefits of IPQA® using our PrintRite3D® software.

On August 24, 2016, we announced the launch of PrintRite3D® INSPECT™ software v1.3.2, the next-generation of our In-Process Quality Assurance™ (IPQA®) software for additive manufacturing. The latest version of INSPECT™ provides an enhanced user experience that incorporates feedback from our Early Adopter Program customers – resulting in the addition of alloy-specific temperature correction algorithms, improved reporting, and enhanced graphics both layer-by-layer and part-by-part.

On July 21, 2016, we announced that we hired Murray Williams to serve as our Chief Financial Officer, effective as of July 18, 2016. Williams, who has served on the board of directors of fifteen public and private companies, was one of the founders of Buy.com – where he served as its Chief Financial Officer and Vice President of Business Development. In addition, he founded and is the President and CEO of FA Corp, a consulting firm that specializes in taking companies public and managing their accounting, finance, legal and SEC financial reporting functions.

On July 6, 2016, we announced that Woodward, Inc. joined our EAP. Woodward obtained a non-exclusive license to use the complete suite of PrintRite3D^® software modules – INSPECT^™, CONTOUR^™ and ANALYTICS^™ – for one price, with preferred rates for future product license purchases.

Critical Accounting Policies

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported assets, liabilities, sales and expenses in the accompanying financial statements. Critical accounting policies are those that require the most subjective and complex judgments, often employing the use of estimates about the effect of matters that are inherently uncertain. Such critical accounting policies, including the assumptions and judgments underlying them, are disclosed in Note 1 to the Consolidated Financial Statements included in this Quarterly Report. However, we do not believe that there are any alternative methods of accounting for our operations that would have a material effect on our financial statements.

Results of Operations

We generate revenue primarily through the sale of our PrintRite3D® hardware and sensors, through software licensing of our PrintRite3D® technology to customers that seek to improve their manufacturing processes, and through ongoing annual software upgrades and maintenance fees. Additionally, we generate revenue from our contract manufacturing activities in metal AM using our in-house metal 3D printing capability. However, we presently make limited sales of these technologies and services. Our ability to generate revenue in the future will depend on our ability to further commercialize and market our PrintRite3D® technologies and scale up our contract AM services business.

During the three and nine months ended September 30, 2016, we recognized revenue of $189,951 and $642,230, respectively, as compared to $266,566 and $648,515 in revenue that we generated during the same periods in 2015. The decrease in revenue was primarily due to a reduction in work under contracts as compared to the prior year. Our revenue during the nine months ended September 30, 2016 was primarily generated from engineering consulting services we provided to third parties during this period. We expect that our revenue will increase in future periods as we seek to further commercialize and expand our market presence for our PrintRite3D®-related technologies, and obtain new contract manufacturing orders in connection with our contract AM services business, as well as further perform on our engineering consulting contracts for the GE Aviation lead National Additive Manufacturing Innovation Institute program, and continue to provide our similar services under our contract with Honeywell Aerospace for the DARPA Period 3 program. Our cost of service revenue for the three and nine months ended September 30, 2016 was $69,259 and $207,744, respectively, as compared to $25,250 and $138,379 for the same periods in 2015.

Our general and administrative expenses for the three and nine months ended September 30, 2016 were $437,873 and $1,345,576, respectively, as compared to $293,187 and $886,965 for the same periods in 2015. Our payroll expenses for the three and nine months ended September 30, 2016 were $259,011 and $727,494, respectively, as compared to $191,399 and $338,533 for the same periods in 2015. Our expenses relating to stock-based compensation for the three and nine months ended September 30, 2016 were $105,630 and $236,554, respectively, as compared to $221,500 and $478,500 for the same periods in 2015. Our research and development expenses for the three and nine months ended September 30, 2016 were $37,532 and $88,504, respectively, as compared to $122,517 and $206,545 for the same periods in 2015.

General and administrative expenses principally include operating expenses and outside service fees, the largest component of which consists of services in connection with our obligations as an SEC reporting company, in addition to other legal, accounting, marketing and investor relations fees. The net increase in general and administrative expenses for the three and nine months ended September 30, 2016 as compared to the same periods in 2015 is principally the result of increased investor relations expenditures and consultant services provided to us due to an increase in our overall business activities, including our continued development of our IPQA®-enabled PrintRite3D® technologies and our related efforts to expand our services. The net increase in payroll expenses for the three and nine months ended September 30, 2016 as compared to the same periods in 2015 is principally the result of our hiring of nine employees since September 2015. The net decrease in research and development expenses for the three and nine months ended September 30, 2016 as compared to the same periods in 2015 is principally the result of the shift in operations from research and development to more of a production company. The net decrease in stock-based compensation costs is due to issuing less stock in 2016 for compensation than we issued in 2015 for compensation.

As a result of our increased operating activities, including further commercialization of our IPQA®-enabled PrintRite3D® technologies, and our increased marketing and sales efforts associated with such technologies, including with respect to our EAP and OEM Partner Program, and our contract manufacturing activities, our general and administrative expenses in the future are expected to continue to increase. Similarly, we anticipate that our payroll and non-cash compensation expenses will continue to increase as we engage more employees and consultants to support our efforts to grow our business.

Our net loss for the three and nine months ended September 30, 2016 increased over the prior year and totaled $719,320 and $1,931,833, respectively, as compared to $587,130 and $1,399,378 for the same periods in 2015. Our revenue decreased and we experienced a larger net increase in expenses.

Liquidity and Capital Resources

As of September 30, 2016, we had $137,702 in cash and had a working capital surplus of $136,518, as compared with $1,539,809 in cash and a working capital surplus of $1,768,931 as of December 31, 2015. On October 19, 2016, we closed a private placement of the Notes and the Warrants for aggregate gross proceeds, before expenses, to the Company of $900,000. The Notes bear interest at the rate of 10% per annum and mature twelve months following the date of issuance, or such earlier date as the Notes are required, or permitted, to be repaid as provided under the Notes. The Company must make quarterly interest payments in cash or in shares of the Company's common stock, as applicable.

We generate revenue primarily through the sale of our PrintRite3D® hardware and sensors, through software licensing of our PrintRite3D® technology to customers that seek to improve their manufacturing processes, and through ongoing annual software upgrades and maintenance fees. Additionally, we generate revenue from our contract manufacturing activities in metal AM using our in-house metal 3D printing capability. However, for the period from our inception through September 30, 2016, we generated revenue primarily from PrintRite3D®-enabled engineering consulting services we provided during this period, and financed our operations primarily from such revenue and through private sales of Sigma common stock. During the remainder of 2016, we expect to further ramp up our operations and our commercialization and marketing efforts, which will increase the amount of cash we will use in our operations.

We expect that our continued development of our IPQA®-enabled PrintRite3D® technology will enable us to finalize our commercialization of this technology for the AM metal market in the remainder of 2016 and 2017. However, until commercialization of our full suite of PrintRite3D® technologies, we plan to continue funding our development activities and operating expenses by selling and licensing our PrintRite3D® systems and supporting field services, as applicable, and providing PrintRite3D®-enabled engineering consulting services concerning our areas of expertise (materials and manufacturing quality assurance and process control technologies) and contract manufacturing for metal AM, and through the use of proceeds from sales of our securities.

Cash used in operating activities during the nine months ended September 30, 2016 increased to $1,322,366 from $1,038,993 during the same period in 2015, primarily due to increases in accounts receivable and inventory, which were offset by increases in accounts payable during the quarter. Also, there was a larger net loss during the nine months ended September 30, 2016 with fewer non-cash expenses during the quarter, as compared to the same period in 2015. The Company anticipates less loss during the remainder of 2016 due to an expected increase in revenue, offset by an increase in salaries and related expenses in connection with our additional employees. Cash used in investing activities decreased during the nine months ended September 30, 2016 to $79,741, as compared to $86,221 during the same period in 2015, due primarily to the decrease in overall purchases of furniture and equipment as well as the purchases of intangible assets. Purchases during the remainder of 2016 are not expected to increase dramatically over 2015. There were no cash flows used or provided by financing during the nine months ended September 30, 2016 or 2015.

As of November 14, 2016, Sigma has nine active contracts with respect to which we expect to perform and generate up to approximately $204,000 in revenue during the remainder of 2016, subject to the achievement by us of certain performance milestones, as well as our contracts not being terminated by our clients.

Some of our engineering consulting contracts, including the contracts from Honeywell Aerospace, GE Aviation, Montana Tech, Bendix King and Aerojet Rocketdyne, are fixed-price contracts, for which we will receive a specified fee regardless of our cost to perform under such contract. In connection with entering into these fixed-contract consulting arrangements, we are required to estimate our costs of performance. To actually earn a profit on these contracts, we must accurately estimate costs involved and assess the probability of meeting the specified objectives, realizing the expected units of work or completing individual transactions, within the contracted time period. Accordingly, if we under-estimate the cost to complete a contract, we remain obligated to complete the work based on our initial cost estimate, which would reduce the amount of profit actually earned under the contract.

On July 28, 2016, we filed a Form S-1 Registration Statement for the offer and sale of up to $10,000,000 of units, each consisting of one share of our common stock and one warrant to purchase one share of our common stock exercisable at a per share price equal to 120% of the common stock public offering price. There is no assurance that we will be successful in obtaining financing from this offering. We have no credit lines or facilities as of November 14, 2016, nor have we ever had a credit facility since our inception. We are continuing to evaluate potential future sources of capital, as we do not currently have commitments from any third parties to provide us with additional capital.

We do not have any material commitments for capital expenditures during the next twelve months. Based on the funds we have as of November 11, 2016, and the proceeds we expect to receive under our PrintRite3D®-enabled engineering consulting agreements, from selling or licensing our PrintRite3D® systems and software, sales of contract AM manufacturing for metal AM parts, and from offerings of the Company's securities, we believe that we will have sufficient funds to pay our administrative and other operating expenses through 2017. Until we are able to generate significant revenues and royalties from selling or licensing our PrintRite3D®-enabled technologies and our contact AM manufacturing services, our ability to continue to fund our liquidity and working capital needs will be dependent upon revenues from existing and future PrintRite3D®-enabled engineering consulting contracts, possible strategic partnerships, contract manufacturing orders in connection with our EOS M290 metal printer, and proceeds received from sales of our securities. Accordingly, we will have to obtain additional capital from the sale of additional securities or by borrowing funds from lenders to fulfill our business plans. If we issue additional equity or debt securities, stockholders may experience additional dilution or the new equity securities may have rights, preferences or privileges senior to those of existing holders of our common stock. There is no assurance that we will be successful in obtaining additional financing. Such financing, if in the form of equity, may be highly dilutive to our existing stockholders and may otherwise include onerous terms. Such financing, if in the form of debt, may include debt covenants and repayment obligations that are onerous and that adversely affect our business operations. If adequate funds are not available to us, we may be required to delay, limit or terminate our business operations If we fail to obtain sufficient funding when needed, we may be forced to delay, scale back or eliminate all or a portion of our commercialization efforts and operations.

Inflation and changing prices have had no effect on our continuing operations over our two most recent fiscal years.

We have no off-balance sheet arrangements as defined in Item 303(a) of SEC Regulation S-K.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Not applicable.

ITEM 4. CONTROLS AND PROCEDURES.

Our management, including our President and Chief Executive Officer, and Chief Financial Officer, evaluated the effectiveness of our “disclosure controls and procedures” (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of the end of the period covered by this quarterly report, as required by paragraph (b) of Exchange Act Rules 13a-15 and 15d-15.

Based on that evaluation, we have concluded that as of the end of the period covered by this quarterly report, our disclosure controls and procedures are effective at a reasonable assurance level in ensuring that information required to be disclosed by us in our reports is recorded, processed, summarized and reported within the required time periods. The foregoing conclusion is based, in part, on the fact that we are a small public company in the early stage of our business, with limited revenue and employees. Based upon our evaluation, we also concluded that there was no change in our internal control over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

PART II

OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS.

Not applicable.

ITEM 1A. RISK FACTORS.

Not applicable.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS.

On July 18, 2016, the Company issued 4,167 shares of common stock to a consultant for services to be rendered valued at $12,501 ($3.00 per share). The foregoing shares were issued in reliance upon an exemption from the registration requirements pursuant to Section 4(2) of the Securities Act of 1933, as amended.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES.

Not applicable.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

ITEM 5. OTHER INFORMATION.

Not applicable.

ITEM 6. EXHIBITS.



4.1	Form of Warrant issued to investors.(1)

10.1	Employment Letter Agreement, effective July 18, 2016, between Sigma Labs, Inc. and Murray Williams.(2)*

10.2	Securities Purchase Agreement, dated as of October 17, 2016, by and among Sigma Labs, Inc. and the investors named therein.(1)

10.3
Form of Secured Convertible Note issued as of October 17, 2016.(1)

10.4	Registration Rights Agreement, dated as of October 17, 2016, by and among Sigma Labs, Inc. and the investors named therein.(1)

10.5	Security Agreement, dated as of October 17, 2016, by and between Sigma Labs, Inc. and L 1 Capital Global Opportunities Master Fund Ltd, in its capacity as Collateral Agent.(1)

31.1	Rule 13a-14(a) Certification of Principal Executive Officer, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.**

31.2	Rule 13a-14(a) Certification of Principal Financial Officer, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.**

32.1	Certification of Principal Executive Officer and Principal Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.**

101.INS	XBRL Instance Document.**

101.SCH	XBRL Schema Document.**

101.CAL	XBRL Calculation Linkbase Document.**

101.DEF	XBRL Definition Linkbase Document.**

101.LAB	XBRL Labels Linkbase Document.**

101.PRE	XBRL Presentation Linkbase Document.**

(1) Previously filed as an exhibit to the Company’s Form 8-K, filed on October 20, 2016 (033-02783-S), and incorporated herein by reference.

(2) Previously filed as an exhibit to the Company’s Form 10-Q, filed on August 11, 2016 (033-02783-S), for the period ended June 30, 2016, and incorporated herein by reference.

* Indicates a management contract or compensatory plan or arrangement.

** Filed herewith.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.



	SIGMA LABS, INC.

November 14, 2016	By:	/s/ Mark J. Cola
		Mark J. Cola
		President and Chief Executive Officer (Principal Executive Officer)

November 14, 2016	By:	/s/ Murray Williams
		Murray Williams
		Chief Financial Officer and Treasurer (Principal Financial and Accounting Officer)