SIGMATRON INTERNATIONAL INC - Annual Report: 2014 (Form 10-K)

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

 

      X       Annual Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.

 For the fiscal year ended April 30, 2014.

Or

                Transition Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.

 For the transition period from ___________to___________.

 

Commission file number 0-23248

 

SIGMATRON INTERNATIONAL, INC.

(Exact name of registrant as specified in its charter)

 

 

 

 

Securities registered pursuant to Section 12(g) of the Act:  None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  ☐Yes   ☒ No

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  ☐Yes   ☒ No

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. 

☒  Yes   ☐ No

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   ☒ Yes  ☐  No

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☐

 

---

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company.   See definition of “accelerated filer” “large accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer  ☐  Accelerated filer  ☐    Non-accelerated  ☐  Smaller reporting company  ☒

 

Indicate by check mark whether registrant is a shell company (as defined in Rule 12b-2 of the Act.) ☐Yes ☒ No

 

The aggregate market value of the voting common equity held by non-affiliates of the registrant as of October 31, 2013 (the last business day of the registrant’s most recently completed second fiscal quarter) was $18,336,611 based on the closing sale price of $5.21 per share as reported by Nasdaq Capital Market as of such date.

 

The number of outstanding shares of the registrant’s Common Stock, $0.01 par value, as of July 21, 2014 was 4,035,317.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Certain sections or portions of the definitive proxy statement of SigmaTron International, Inc., for use in connection with its 2014 annual meeting of stockholders, which the Company intends to file within 120 days of the fiscal year ended April 30, 2014, are incorporated by reference into Part III of this Form 10-K.

 

---

 

 

TABLE OF CONTENTS

 

 

 

---

 

 

 

PART I

 

 

ITEM 1.  BUSINESS

 

CAUTIONARY NOTE:

 

In addition to historical financial information, this discussion of the business of SigmaTron International, Inc. (“SigmaTron”), its wholly-owned subsidiaries Standard Components de Mexico S.A., AbleMex, S.A. de C.V., Digital Appliance Controls de Mexico, S.A. de C.V., Spitfire Controls (Vietnam) Co. Ltd., Spitfire Controls (Cayman) Co. Ltd., wholly-owned foreign enterprises Wujiang SigmaTron Electronics Co., Ltd. and SigmaTron Electronic Technology Co., Ltd. (collectively, “SigmaTron China”) and international procurement office SigmaTron Taiwan branch (collectively, the “Company”) and other Items in this Annual Report on Form 10-K contain forward-looking statements concerning the Company’s business or results of operations.  Words such as “continue,” “anticipate,” “will,” “expect,” “believe,” “plan,” and similar expressions identify forward-looking statements.  These forward-looking statements are based on the current expectations of the Company.  Because these forward-looking statements involve risks and uncertainties, the Company’s plans, actions and actual results could differ materially.  Such statements should be evaluated in the context of the risks and uncertainties inherent in the Company’s business including, but not necessarily limited to, the Company’s continued dependence on certain significant customers; the continued market acceptance of products and services offered by the Company and its customers; pricing pressures from the Company’s customers, suppliers and the market; the activities of competitors, some of which may have greater financial or other resources than the Company; the variability of our operating results; the results of long-lived assets and goodwill impairment testing; the variability of our customers’ requirements; the availability and cost of necessary components and materials; the ability of the Company and our customers to keep current with technological changes within our industries; regulatory compliance, including conflict minerals; the continued availability and sufficiency of our credit arrangements; changes in U.S., Mexican, Chinese, Vietnamese or Taiwanese regulations affecting the Company’s business; the turmoil in the global economy and financial markets; the stability of the U.S., Mexican, Chinese, Vietnamese and Taiwanese economic, labor and political systems and conditions; currency exchange fluctuations; and the ability of the Company to manage its growth.  These and other factors which may affect the Company’s future business and results of operations are identified throughout this Annual Report and as risk factors, and may be detailed from time to time in the Company’s filings with the Securities and Exchange Commission.  These statements speak as of the date of such filings, and the Company undertakes no obligation to update such statements in light of future events or otherwise unless otherwise required by law.

 

Overview

 

SigmaTron is a Delaware corporation, which was organized on November 16, 1993, and commenced operations when it became the successor to all of the assets and liabilities of SigmaTron L.P., an Illinois limited partnership, through a reorganization on February 8, 1994.

 

The Company operates in one business segment as an independent provider of electronic manufacturing services (“EMS”), which includes printed circuit board assemblies and completely assembled (box-build) electronic products.  In connection with the production of assembled products, the Company also provides services to its customers, including (1) automatic and manual assembly and testing of products; (2) material sourcing and procurement; (3) manufacturing and test engineering support; (4) design services; (5) warehousing and distribution services; and (6) assistance in obtaining product approval from governmental and other regulatory bodies.  The Company provides these manufacturing services through an international network of facilities located in the United States, Mexico, China, Vietnam and Taiwan.

 

The Company provides manufacturing and assembly services ranging from the assembly of individual components to the assembly and testing of box-build electronic products.  The Company has the ability to produce assemblies requiring mechanical as well as electronic capabilities.  The products assembled by the Company are then incorporated into finished products sold in various industries, particularly appliance,

---

 

consumer electronics, gaming, fitness, industrial electronics, medical/life sciences, semiconductor, telecommunications and automotive.

 

The Company operates manufacturing facilities in Elk Grove Village, Illinois U.S.; Union City, California U.S.; Acuna, Chihuahua and Tijuana, Mexico; Suzhou, China; and Ho Chi Minh City, Vietnam.  In addition, the Company maintains materials sourcing offices in Elk Grove Village, Illinois U.S.; Union City, California U.S.; and Taipei, Taiwan.  The Company also provides design services in Elgin, Illinois.

 

In an effort to facilitate the growth of our China operation, the Company established a new Chinese entity in October 2011 that allows the Company to provide services competitively to the domestic market in China.  Nonetheless, in fiscal year 2013 and 2014, the Company continued to see a trend of Chinese costs increasing, thereby making Mexico a more competitive manufacturing location to service North America.  Indications suggest that this trend will continue.

 

The Company’s international footprint provides our customers with flexibility within the Company to manufacture in China,  Mexico, Vietnam or the U.S.    We believe this strategy has continued to serve the Company well during these difficult economic times as its customers continuously evaluate their supply chain strategies.

 

On May 31, 2012, SigmaTron acquired certain assets and assumed certain liabilities of Spitfire Control, Inc. (“Spitfire”).  Spitfire was a privately held Illinois corporation headquartered in Carpentersville, Illinois with captive manufacturing sites in Chihuahua, Mexico and Ho Chi Minh City, Vietnam.  Both manufacturing sites were among the assets acquired by the Company.  Spitfire was an original equipment manufacturer (“OEM”) of electronic controls, with a focus on the major appliance (white goods) industry.  Although North America is currently its primary market, Spitfire has applications that can be used worldwide.  The Company provided manufacturing solutions for Spitfire since 1994, and was a strategic partner to Spitfire as it developed its OEM electronic controls business.

 

Spitfire provides cost effective designs as control solutions for its customers, primarily in high volume applications of domestic cooking ranges, dishwashers, refrigerators, and portable appliances.  The Company’s Spitfire division is a member of the Association of Home Appliance Manufacturers (“AHAM”), as well as other industry related trade associations and is ISO 9001:2008 certified.  The Spitfire acquisition has enabled the Company to offer design services for the first time in specific markets.  Due to the acquisition of Spitfire, effective June 1, 2012, the Company discontinued selling to Spitfire and instead began selling directly to Spitfire’s former customers.

 

The Company had a better year financially in fiscal 2014 compared to fiscal 2013.  The improvement was driven in part by leveraging higher revenues while continuing to drive increased efficiency and productivity into the Company’s operations, including the integration of the Spitfire acquisition.  The Company’s industry remains challenging and pricing pressures continue from both its customers and supply chain.  The Company intends to continue to attempt to make progress in terms of productivity and increased revenues.  The Company believes revenue growth will continue with its current customers and through the recent addition of several new customers, which it hopes will become long term valued relationships.  The Company believes it has opportunity for new revenue, but nothing is certain and the stagnant economy tends to slow the process.  In the past, the timing of production and delivery of orders, primarily at the direction of customers, has caused, and will likely continue the cause, the Company to experience significant quarterly fluctuations in its revenues and earnings.

 

Products and Services

 

The Company provides a broad range of electronic and electromechanical manufacturing related outsourcing solutions for its customers.   These solutions incorporate the Company’s knowledge and expertise in the EMS industry to provide its customers with the most advanced manufacturing technologies, complete supply chain management, responsive and flexible customer service, as well as product design, test and engineering support.  The Company’s EMS solutions are available from inception of product concept through the ultimate delivery of a finished good.  Such technologies and services include the following:

---

 

Manufacturing and Testing Services:  The Company’s core business is the assembly and testing of all types of electronic printed circuit board assemblies (“PCBA”) and often incorporating these PCBAs into electronic modules used in all types of devices and products that depend on electronics for their operation.  This assembly work utilizes state of the art manufacturing and test equipment to deliver highly reliable products to the Company’s customers.  The Company supports new product introduction (“NPI”), low volume / high mix as well as high volume/ low mix assembly work at all levels of complexity.  Assembly services include pin-through-hole (“PTH”) components, surface mount (“SMT”) components, including ball grid array (“BGA”), part-on-part components, conformal coating, parylene coating and others.  Test services include and are not limited to, in-circuit, automated optical inspection (“AOI”), functional, burn-in, hi-pot and boundary scan.  From simple component assembly through the most complicated industry testing, the Company offers virtually every service required to build electronic devices commercially available in the market today.

 

Design Services:    To compliment the manufacturing services it offers its customers, the Company also offers DFM, design for manufacturing and DFT, design for test review services to help customers ensure that the products they have designed are optimized for production and testing.  In addition, through its Spitfire Control division, the Company offers complete product design services for a variety of industries and applications, including appliance controls.

 

Supply Chain Management:  The Company provides complete supply chain management for the procurement of components needed to build customers’ products.  This includes the procurement and management of all types of electronic components and related mechanical parts such as plastics and metals.  The Company’s resources supporting this activity are provided both on a plant specific basis as well as globally through its international procurement office (“IPO”) in Taipei, Taiwan.  Each of its sites is linked together using the same Enterprise Resource Planning (“ERP”) system and custom IScore software tools with real-time on-line visibility for customer access.  The Company generally procures material from major manufacturers and distributors of electronic parts.

 

Warehousing and Distribution:  The Company provides in-house and third party warehousing, shipping, and customs brokerage for border crossings as part of its service offering.  This includes international shipping, drop shipments to the end customer, as well as, support of inventory optimization activities such as kanban and consignment.

 

Green, Sustainability, and Social Responsible Initiatives:  The Company supports initiatives that promote sustainability, green environment and social responsibility.  The Company requires its supply chain to meet all government imposed requirements in these areas and helps its customers in achieving effective compliance.  This includes, but is not limited to, Restrictions of Hazardous Substances (“RoHS”), Restriction of Chemicals (“Reach”) and Conflict Minerals regulations.

 

Manufacturing Location and Certifications:  The Company’s manufacturing and warehousing locations are  strategically located to support our customers with  locations in Elk Grove Village, Illinois U.S.; Union City, California U.S.; Acuna, Chihuahua and Tijuana, Mexico; Suzhou, China and Ho Chi Minh City, Vietnam.  The Company’s ability to transition manufacturing to lower cost regions without jeopardizing flexibility and service, differentiates it from many competitors.  Manufacturing certifications and registrations are location specific, and include ISO 9001:2008, ISO 14001:2004, Medical ISO 13485:2003, Aerospace AS9100C and International Traffic in Arms Regulations (“ITAR”) certifications.

 

Markets and Customers

 

The Company’s customers are in the appliance, gaming, industrial electronics, fitness, medical/life sciences, semiconductor, telecommunications and consumer electronics industries.  As of April 30, 2014, the Company had approximately 100 active customers ranging from Fortune 500 companies to small, privately held enterprises.

 

---

 

The following table shows, for the periods indicated, the percentage of net sales to the principal end-user markets it serves.

 

 

 

 

For the fiscal year ended April 30, 2014, Electrolux and Whirlpool Inc. accounted for 31.6% and 12.0%, respectively, of the Company’s net sales.  For the fiscal year ended April 30, 2013, Electrolux and Life Fitness, Inc., the Company’s largest two customers, accounted for 26.8% and 9.6%, respectively, of the Company’s net sales.  On May 31, 2012, the Company acquired Spitfire and as of June 1, 2012, the Company discontinued selling to Spitfire and instead began selling to Spitfire’s former customers.  Although the Company does not have a long term contract with Electrolux or Whirlpool, the Company expects that Electrolux and Whirlpool will continue to account for a significant percentage of the Company’s net sales, although the percentage of net sales may vary from period to period.

 

Sales and Marketing

 

The Company markets its services through 10 independent manufacturers’ representative organizations that together currently employ approximately 27 sales personnel in the United States and Canada.  Independent manufacturers’ representatives organizations receive variable commissions based on orders received by the Company and are assigned specific accounts, not territories.  Many of the members of the Company’s senior management are actively involved in sales and marketing efforts, and the Company has 5 direct sales employees.  In addition, the Company markets itself through its website and tradeshows.

 

In the past, the timing of production and delivery of orders, primarily at the direction of its customers, has caused the Company to experience significant quarterly fluctuations in its revenue and earnings, and the Company expects such fluctuations to continue.

 

Mexico, Vietnam and China Operations

 

The Company’s wholly-owned subsidiary, Standard Components de Mexico, S.A, a Mexican corporation, is located in Acuna, Coahuila Mexico, a border town across the Rio Grande River from Del Rio, Texas, and is 155 miles west of San Antonio. Standard Components de Mexico, S.A. was incorporated and commenced operation in 1968 and had 903 employees at April 30, 2014.  The Company’s wholly-owned subsidiary, AbleMex S.A. de C.V., a Mexican corporation, is located in Tijuana, Baja California Mexico, a border town south of San Diego, California.  AbleMex S.A. de C.V. was incorporated and commenced operations in 2000.  The operation had 160 employees at April 30, 2014.  The Company’s wholly-owned subsidiary, Digital Appliance Controls de Mexico S.A., a Mexican corporation, is located in Chihuahua, Mexico, located approximately 235 miles from

---

 

El Paso, Texas.  Digital Appliance Controls de Mexico S.A. was incorporated and commenced operations in 1997.  The operation had 413 employees at April 30, 2014.  The Company believes that one of the key benefits to having operations in Mexico is its access to cost-effective labor resources while having geographic proximity to the United States.

 

The Company’s wholly-owned foreign enterprises, Wujiang SigmaTron Electronics Co., Ltd. and SigmaTron Electronic Technology Co., Ltd., are located in Suzhou, China.  The Company has entered into an agreement with governmental authorities in the economic development zone of Wujiang, Jiangsu Province, Peoples Republic of China, pursuant to which the Company became the lessee of a parcel of land of approximately 100 Chinese acres.  The term of the land lease is 50 years.  The Company built a manufacturing plant, office space and dormitories on this site during 2004.  Both SigmaTron China entities operate at this site.  At April 30, 2014, this operation had 477 employees.

 

The Company’s wholly-owned subsidiary, Spitfire Controls (Vietnam) Co. Ltd. is located in Amata Industrial Park, Bien Hoa City, Dong Nai Province, Vietnam, and is 18 miles east of Ho Chi Minh City.  Spitfire Controls (Vietnam) Co. Ltd. was incorporated and commenced operation in 2005 and had 369 employees as of April 30, 2014.

 

The Company provides funds for salaries, wages, overhead and capital expenditure items as necessary to operate its wholly-owned Mexican, Vietnam and Chinese subsidiaries and the Taiwan IPO.  The Company provides funding in U.S. dollars, which are exchanged for Pesos, Dong, Renminbi, and New Taiwan dollars as needed.  The fluctuation of currencies from time to time, without an equal or greater increase in inflation, could have a material impact on the financial results of the Company.    The impact of currency fluctuation for the fiscal years ended April 30, 2014 and April 30, 2013 resulted in a foreign currency loss of approximately $128,000 and $359,000, respectively.  In fiscal year 2014, the Company paid approximately $51,200,000 to its foreign subsidiaries.  In fiscal year 2013, the Company’s wholly-owned trading company, SigmaTron International Trading Co. was liquidated.  The Company received a distribution of approximately $188,000 as a result of this liquidation.

 

During fiscal year 2014, the Company realized a distribution of approximately $3,006,825 from foreign subsidiaries based in Mexico.  The U.S. income tax on the distribution was $333,128 which is reflected in the Company’s tax provision for the fiscal year ended April 30, 2014.  The distribution from the foreign subsidiaries based in Mexico does not change the Company’s intentions to indefinitely reinvest the income from the Company’s foreign subsidiaries.  The Company’s intent is to keep unrepatriated funds indefinitely reinvested outside of the United States and current plans do not demonstrate a need to fund U.S. operations.

 

The Company has not recorded U.S. income taxes for a significant portion of undistributed earnings of the Company’s foreign subsidiaries, since these earnings have been, and under current plans will continue to be, permanently reinvested in these foreign subsidiaries.  The cumulative amount of unremitted earnings for which U.S. income taxes have not been recorded is approximately $12,300,000 as of April 30, 2014.

 

The consolidated financial statements as of April 30, 2014 include the accounts and transactions of SigmaTron, its wholly-owned subsidiaries, Standard Components de Mexico, S.A., AbleMex S.A. de C.V., Digital Appliance Controls de Mexico, S.A. de C.V., Spitfire Controls (Vietnam) Co. Ltd., Spitfire Controls (Cayman) Co. Ltd., wholly-owned foreign enterprises Wujiang SigmaTron Electronics Co., Ltd. and SigmaTron Electronic Technology Co., Ltd., and international procurement office, SigmaTron Taiwan Branch.  The functional currency of the Mexican and Vietnam subsidiaries, Chinese foreign enterprise and Taiwanese procurement branch is the U.S. dollar.  Intercompany transactions are eliminated in the consolidated financial statements.

 

---

 

Competition

 

The EMS industry is highly competitive and subject to rapid change.  Furthermore, both large and small companies compete in the industry, and many have significantly greater financial resources, more extensive business experience and greater marketing and production capabilities than the Company.  The significant competitive factors in this industry include price, quality, service, timeliness, reliability, the ability to source raw components, and manufacturing and technological capabilities.  The Company believes it can competitively address all of these factors.

 

Consolidation

 

As a result of consolidation and other transactions involving competitors and other companies in the Company’s markets, the Company occasionally reviews potential transactions relating to its business, products and technologies.  Such transactions could include mergers, acquisitions, strategic alliances, joint ventures, licensing agreements, co-promotion agreements, financing arrangements or other types of transactions.  In the future, the Company may choose to enter into these types of or other transactions at any time depending on available sources of financing, and such transactions could have a material impact on the Company’s business, financial condition or operations.

 

On May 31, 2012, SigmaTron acquired certain assets and assumed certain liabilities of Spitfire.  Spitfire was a privately held Illinois corporation with captive manufacturing sites in Chihuahua, Mexico and suburban Ho Chi Minh City, Vietnam.  Both manufacturing sites were among the assets acquired by the Company.   Spitfire was an OEM of electronic controls, with a focus on the major appliance (white goods) industry.  Although North America was its primary market, Spitfire has applications that can be used worldwide.  The Company provided manufacturing solutions for Spitfire since 1994, and was a strategic partner to Spitfire as it developed its OEM electronic controls business.

 

Governmental Regulations

 

The Company’s operations are subject to certain foreign, federal, state and local regulatory requirements relating to, among others, environmental, waste management, labor and health and safety matters.  Management believes that the Company’s business is operated in material compliance with all such regulations, including Restriction of Hazardous Substances (“RoHS”).  RoHS prohibits the use of lead, mercury and certain other specified substances in electronics products.  The Company has RoHS-dedicated manufacturing capabilities at all of its manufacturing operations.

 

The Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (the “Dodd-Frank Act”) introduced reporting requirements for verification of whether the Company directly (or indirectly through suppliers of components) is purchasing the minerals or metals gold, columbite-tantalite, cassiterite, wolframite and their derivatives: tin, tungsten, and tantalum, that are being provided by sources in the conflict region of the Democratic Republic of Congo (“DRC”).  On May 30, 2014, the Company filed Form SD with the Securities and Exchange Commission stating the Company’s supply chain remains DRC conflict undeterminable.

 

To date, the Company’s costs of compliance for conflict minerals reporting is estimated to be $350,000.  Additional or modified requirements may be imposed in the future.  If such additional or modified requirements are imposed, or if conditions requiring remediation are found to exist, the Company may be required to incur additional expenditures.

 

---

 

Backlog

 

The Company relies on customers’ forecasted orders and purchase orders (firm orders) from its customers to estimate backlog.  Historically, customers have rescheduled or cancelled firm orders and consequently there is little or no financial significance between forecasted orders or firm orders.  The Company has eliminated the distinction in its accounting system between the two types of orders, and only estimates firm orders.  The Company’s backlog of firm orders as of April 30, 2014 and 2013 was approximately $114,420,000 and $119,300,000, respectively.  The Company anticipates a significant portion of the backlog at April 30, 2014 will ship in fiscal year 2015.  Because customers may cancel or reschedule deliveries, backlog may not be a meaningful indicator of future revenue.  Variations in the magnitude and duration of contracts, forecasts and purchase orders received by the Company and delivery requirements generally may result in substantial fluctuations in backlog from period to period.

 

Employees

 

The Company employed approximately 2,800 people as of April 30, 2014, including 192 engaged in engineering or engineering-related services, 2,204 in manufacturing and 404 in administrative and marketing functions.

 

The Company has a labor contract with Chemical & Production Workers Union Local No. 30, AFL-CIO, covering the Company’s workers in Elk Grove Village, Illinois which expires on November 30, 2015. The Company’s Mexican subsidiary, Standard Components de Mexico S.A., has a labor contract with Sindicato De Trabajadores de la Industra Electronica, Similares y Conexos del Estado de Coahuila, C.T.M. covering the Company’s workers in Acuna, Mexico which expires on February 1, 2016.  The Company’s subsidiary located in Tijuana Mexico has a labor contract with Sindicato Mexico Moderno De Trabajadores De La, Baja California, C.R.O.C.  The contract does not have an expiration date.  The Company’s subsidiary located in Ho Chi Minh City, Vietnam, has a labor contract with CONG DOAN CO SO CONG TY TNHH Spitfire Controls Vietnam. The contract remains active.

 

Since the time the Company commenced operations, it has not experienced any union-related work stoppages.  The Company believes its relations with both unions and its other employees are good.

 

---

 

Executive Officers of the Registrant 

 

 

 

 

 

ITEM 1A. RISK FACTORS

 

The following risk factors should be read carefully in connection with evaluating our business and the forward-looking information contained in this Annual Report on Form 10-K.  Any of the following risks could materially adversely affect our business, operations, industry or financial position or our future financial performance.  While the Company believes it has identified and discussed below the key risk factors affecting its business, there may be additional risks and uncertainties that are not presently known or that are not currently believed to be significant that may adversely affect its business, operations, industry, financial position and financial performance in the future.

 

The Company’s ability to secure and maintain sufficient credit arrangements is key to its continued operations.

 

There is no assurance that the Company will be able to retain or renew its credit agreements and other finance agreements in the future.  In the event the business grows rapidly, the uncertain economic climate continues or the Company considers another acquisition, additional financing resources could be necessary in the current or future fiscal years.  There is no assurance that the Company will be able to obtain equity or debt financing at acceptable terms, or at all in the future.

 

---

 

The Company has a senior secured credit facility with Wells Fargo Bank National Association (“Wells Fargo”) with a credit limit up to $30,000,000 and a term through September 30, 2013.  The facility allows the Company to choose among interest rates at which it may borrow funds.  The credit facility is collateralized by substantially all of the domestically located assets of the Company and the Company has pledged 65% of its equity ownership interest in some of its foreign entities.  The Company is required to be in compliance with several financial covenants.  In conjunction with the 2012 Spitfire acquisition, two of the financial covenants required by terms of the senior secured credit facility were amended as of May 31, 2012.  During the quarter ended October 31, 2013, the Company renewed its senior secured credit facility.  The facility was revised to extend the term of the agreement to October 31, 2015, amend its capital expenditure covenant, terminate the unused line fee and reduced its borrowing interest rates.  The renewed facility allows the Company to choose among interest rates at which it may borrow funds.  The interest rate is prime rate (effectively, 3.25% at April 30, 2014) or LIBOR plus two and a half percent (effectively, 2.75% at April 30, 2014), which is paid monthly.  In April 2013, the Company again amended its credit agreement and renegotiated two of the financial covenants required by the terms of the Company’s senior secured credit facility.  At April 30, 2014, the Company was in compliance with its amended financial covenants.  As of April 30, 2014, there was a $23,000,000 outstanding balance and $7,000,000 of unused availability under the credit facility, assuming the Company remained in compliance with its financial covenants.

 

The Company anticipates that its credit facilities, cash flow from operations and leasing resources are adequate to meet its working capital requirements and capital expenditures for fiscal year 2015 at the Company’s current level of business.  The Company has received forecasts from current customers for increased business that would require additional investment in inventory, capital equipment and facilities.  To the extent that these forecasts come to fruition, the Company intends to meet any increased capital requirements by seeking an increase in its secured line of credit or raising capital from other sources of debt or equity.  In addition, in the event the Company expands its operations, its business grows rapidly, the current economic climate deteriorates, customers delay payments, or the Company considers an acquisition, additional financing resources would be necessary in the current or future fiscal years.  There is no assurance that the Company will be able to obtain equity or debt financing at acceptable terms, or at all, in the future.  There is no assurance that the Company will be able to retain or renew its credit agreements in the future, or that any retention or renewal will be on the same terms as currently exist.

 

Adverse changes in the economy or political conditions could negatively impact the Company’s business, results of operations and financial condition.

 

The Company’s sales and gross margins depend significantly on market demand for its customers’ products.  The uncertainty in the U.S. and international economic and political environment could result in a decline in demand for our customers’ products in any industry.  Further, any adverse changes in tax rates and laws affecting our customers could result in decreasing gross margins.  Any of these factors could negatively impact the Company’s business, results of operations and financial condition.

 

The Company experiences variable operating results.

 

The Company’s results of operations have varied and may continue to fluctuate significantly from period to period, including on a quarterly basis.  Consequently, results of operations in any period should not be considered indicative of the results for any future period, and fluctuations in operating results may also result in fluctuations in the price of the Company’s common stock.

 

The Company’s quarterly and annual results may vary significantly depending on numerous factors, many of which are beyond the Company’s control.  Some of these factors include:

 

 

---

 

The Company’s customer base is concentrated.

 

Sales to the Company’s five largest customers accounted for 60% and 53% of net sales for the fiscal years ended April 30, 2014 and 2013, respectively.  For the year ended April 30, 2014, two customers accounted for 31.6% and 12.0% of net sales of the Company, and 11.2% and 4.5% of accounts receivable at April 30, 2014.  For the year ended April 30, 2013, two customers accounted for 26.8% and 9.6% of net sales of the Company and 11.0% and 6.4% of accounts receivable at April 30, 2013.  Significant reduction in sales to any of the Company’s major customers or the loss of a major customer could have a material impact on the Company’s operations.  If the Company cannot replace canceled or reduced orders, sales will decline, which could have a material impact on the results of operations.  There can be no assurance that the Company will retain any or all of its largest customers.  This risk may be further complicated by pricing pressures and intense competition prevalent in our industry.

 

The Company has a significant amount of trade accounts receivable from some of its customers due to customer concentration.  If any of the Company’s customers have financial difficulties, the Company could encounter delays or defaults in the payment of amounts owed.  This could have a significant adverse impact on the Company’s results of operations and financial condition.

 

Most of the Company’s customers do not commit to long-term production schedules, which makes it difficult to schedule production and achieve maximum efficiency at the Company’s manufacturing facilities and to manage inventory levels.

 

The volume and timing of sales to the Company’s customers may vary due to:

 

Many of the Company’s customers do not commit to firm production schedules.  The Company’s inability to forecast the level of customer orders with certainty can make it difficult to schedule production and maximize utilization of manufacturing capacity and manage inventory levels.  The Company could be required to increase or decrease staffing and more closely manage other expenses in order to meet the anticipated demand of its customers.  Orders from the Company’s customers could be cancelled or delivery schedules could be deferred as a result of changes in our customers’ demand, thereby adversely affecting the Company’s results of operations, and resulting in higher inventory levels.

 

The Company and its customers may be unable to keep current with the industry’s technological changes.

 

The market for the Company’s manufacturing services is characterized by rapidly changing technology and continuing product development.  The future success of the Company’s business will depend in large part upon our customers’ ability to maintain and enhance their technological capabilities, develop and market manufacturing services which meet changing customer needs and successfully anticipate or respond to technological changes in manufacturing processes on a cost-effective and timely basis.

 

Our customers have competitive challenges, including rapid technological changes, pricing pressure and decreasing demand from their customers, which could adversely affect their business and the Company’s.

 

Factors affecting the industries that utilize our customers’ products could negatively impact our customers and the Company.  These factors include:

 

---

 

Any such factor or a combination of factors could negatively impact our customers’ need for or ability to pay for our products, which could, in turn, affect the Company’s results of operations.

 

Customer relationships with start-up companies present more risk.

 

A small portion of the Company’s current customer base is comprised of start-up companies.  Customer relationships with start-up companies may present heightened risk due to the lack of product history.  Slow market acceptance of their products could result in demand fluctuations causing inventory levels to rise.  Further, the current economic environment could make it difficult for such emerging companies to obtain additional funding.  This may result in additional credit risk including, but not limited to, the collection of trade account receivables and payment for their inventory.  If the Company does not have adequate allowances recorded, the results of operations may be negatively affected.

 

The Company faces intense industry competition and downward pricing pressures.

 

The EMS industry is highly fragmented and characterized by intense competition.  Many of the Company’s competitors have greater experience, as well as greater manufacturing, purchasing, marketing and financial resources than the Company.

 

Competition from existing or potential new competitors may have a material adverse impact on the Company’s business, financial condition or results of operations.  The introduction of lower priced competitive products, significant price reductions by the Company’s competitors or significant pricing pressures from its customers could adversely affect the Company’s business, financial condition, and results of operations.

 

The Company has foreign operations that may pose additional risks.

 

The Company has substantial manufacturing operations in multiple countries.  Therefore, the Company’s foreign businesses and results of operations are dependent upon numerous related factors, including the stability of the foreign economies, the political climate, relations with the United States, prevailing worker wages, the legal authority of the Company to own and operate its business in a foreign country, and the ability to identify, hire, train and retain qualified personnel and operating management in Mexico, China and Vietnam.

 

The Company obtains many of its materials and components through its IPO in Taipei, Taiwan.  The Company’s access to these materials and components is dependent on the continued viability of its Asian suppliers.

 

Approximately 9% of the total non-current consolidated assets of the Company are located in foreign jurisdictions outside the United States as of April 30, 2014 and 2013.

 

Disclosure and internal controls may not detect all errors or fraud.

 

The Company’s management, including the Chief Executive Officer and Chief Financial Officer, believe that the Company’s disclosure controls and internal controls may not prevent all errors and all fraud.  The Company’s disclosure controls and internal controls can provide only reasonable assurance that the procedures will meet the control objectives.  Controls are limited in their effectiveness by human error, including faulty judgments in decision-making.  Further, controls can be circumvented by collusion of two or more people or by management override of controls.

 

Inadequate internal control over financial reporting could result in a reduction in the value of our common stock.

 

If the Company identifies and reports a material weakness in its internal control over financial reporting, shareholders and the Company’s lenders could lose confidence in the reliability of the Company’s financial statements.  This could have a material adverse impact on the value of the Company’s stock and the Company’s liquidity.

 

---

 

There is a risk of fluctuation of various currencies integral to the Company’s operations.

 

The Company purchases some of its material components and funds some of its operations in foreign currencies.  From time to time the currencies fluctuate against the U.S. dollar.  Such fluctuations could have a material impact on the Company’s results of operations and performance.  The impact of currency fluctuation for the years ended April 30, 2014 and April 30, 2013 resulted in a currency loss of approximately $128,000 and $359,000, respectively.  These fluctuations are expected to continue and could have a negative impact on the Company’s results of operations.  The Company did not, and is not expected to, utilize derivatives or hedge foreign currencies to reduce the risk of such fluctuations.

 

The availability of raw components or an increase in their price may affect the Company’s operations and profits.

 

The Company relies on numerous third-party suppliers for components used in the Company’s production process.  Certain of these components are available only from single-sources or a limited number of suppliers.  In addition, a customer’s specifications may require the Company to obtain components from a single-source or a small number of suppliers.  The loss of any such suppliers could have a material impact on the Company’s results of operations.  Further, the Company could operate at a cost disadvantage compared to competitors who have greater direct buying power from suppliers.  The Company does not enter into long-term purchase agreements with major or single-source suppliers.  The Company believes that short-term purchase orders with its suppliers provides flexibility, given that the Company’s orders are based on the changing needs of its customers.

 

The Company depends on management and skilled personnel.

 

The Company depends significantly on its President/CEO and other executive officers.  The Company’s employees generally are not bound by employment agreements and the Company cannot assure that it will retain its executive officers or skilled personnel.  The loss of the services of any of these key employees could have a material impact on the Company’s business and results of operations.  In addition, despite significant competition, continued growth and expansion of the Company’s EMS business will require that the Company attract, motivate and retain additional skilled and experienced personnel.  The inability to satisfy such requirements could have a negative impact on the Company’s ability to remain competitive in the future.

 

Favorable labor relations are important to the Company.

 

The Company currently has labor union contracts with its employees constituting approximately 48% of its workforce.  Although the Company believes its labor relations are good, any labor disruptions, whether union-related or otherwise, could significantly impair the Company’s business, substantially increase the Company’s costs or otherwise have a material impact on the Company’s results of operations.

 

Failure to comply with environmental regulations could subject the Company to liability.

 

The Company is subject to a variety of environmental regulations relating to the use, storage, discharge and disposal of hazardous chemicals used during its manufacturing process.  To date, the cost to the Company of such compliance has not had a material impact on the Company’s business, financial condition or results of operations.  However, there can be no assurance that violations will not occur in the future as a result of human error, equipment failure or other causes.  Further, the Company cannot predict the nature, scope or effect of environmental legislation or regulatory requirements that could be imposed or how existing or future laws or regulations will be administered or interpreted.  Compliance with more stringent laws or regulations, as well as more vigorous enforcement policies of regulatory agencies, could require substantial expenditures by the Company and could have a material impact on the Company’s business, financial condition and results of operations.  Any failure by the Company to comply with present or future regulations could subject it to future liabilities or the suspension of production which could have a material negative impact on the Company’s results of operations.

 

---

 

Conflict minerals regulations may cause the Company to incur additional expenses and could increase the cost of components contained in its products and adversely affect its inventory supply chain.

 

The Dodd-Frank Act, and the rules promulgated by the Securities and Exchange Commission (“SEC”) thereunder, requires the Company to determine and report annually whether any conflict minerals contained in our products originated from the DRC or an adjoining country. The Dodd-Frank Act and these rules could affect our ability to source components that contain conflict minerals at acceptable prices and could impact the availability of conflict minerals, since there may be only a limited number of suppliers of conflict-free conflict minerals. Our customers may require that our products contain only conflict-free conflict minerals, and our revenues and margins may be negatively impacted if we are unable to meet this requirement at a reasonable price or are unable to pass through any increased costs associated with meeting this requirement. Additionally, the Company may suffer reputational harm with our customers and other stakeholders if our products are not conflict-free.  The Company could incur significant costs in the event we are unable to manufacture products that contain only conflict-free conflict minerals or to the extent that we are required to make changes to products, processes, or sources of supply due to the foregoing requirements or pressures.

 

The price of the Company’s stock is volatile.

 

The price of the Company’s common stock historically has experienced significant volatility due to fluctuations in the Company’s revenue and earnings, other factors relating to the Company’s operations, the market’s changing expectations for the Company’s growth, overall equity market conditions and other factors unrelated to the Company’s operations.  In addition, the limited float of the Company’s common stock and the limited number of market makers also affect the volatility of the Company’s common stock.  Such fluctuations are expected to continue in the future.

 

An adverse change in the interest rates for our borrowings could adversely affect our results of operations.

 

The Company pays interest on outstanding borrowings under its senior secured credit facility and certain other long-term debt obligations at interest rates that fluctuate.  An adverse change in the Company’s interest rates could have a material adverse effect on its results of operations.

 

Changes in securities laws and regulations may increase costs.

 

The Sarbanes-Oxley Act of 2002, as well as rules subsequently implemented by the SEC and listing requirements subsequently adopted by Nasdaq in response to Sarbanes-Oxley, have required changes in corporate governance practices, internal control policies and securities disclosure and compliance practices of public companies.  More recently the Dodd-Frank Act requires changes to our corporate governance, compliance practices and securities disclosures.  Compliance following the implementation of these rules has increased our legal, financial and accounting costs.  The Company expects increased costs related to these new regulations to continue, including, but not limited to, legal, financial and accounting costs.  These developments may result in the Company having difficulty in attracting and retaining qualified members of the board or qualified officers.  Further, the costs associated with the compliance with and implementation of procedures under these laws and related rules could have a material impact on the Company’s results of operations.

 

 

ITEM 1B.    UNRESOLVED STAFF COMMENTS

 

None.

 

 

ITEM 2.  PROPERTIES

 

At April 30, 2014, the Company, operating in one business segment as an independent EMS provider, had manufacturing facilities located in Elk Grove Village, Illinois U.S., Union City, California U.S., Acuna, Chihuahua and Tijuana, Mexico, Ho Chi Minh City, Vietnam and Suzhou, China.  In addition, the Company provides materials procurement services through its Elk Grove Village, Illinois U.S., Union City, California U.S, and Taipei, Taiwan offices.  The Company provides design services in Elgin, Illinois U.S.

 

---

 

Certain information about the Company’s manufacturing, warehouse, purchasing and design facilities is set forth below:

 

 

 

*The Company’s Suzhou, China building is owned by the Company and the land is leased from the Chinese government for a 50 year term.

 

**A portion of the facility is leased and the Company has an option to purchase it.

 

***Total square footage includes 70,000 square feet of dormitories.

 

The Union City, California, Tijuana and Chihuahua, Mexico, Ho Chi Minh City, Vietnam and Del Rio, Texas properties are occupied pursuant to leases of the premises.  The lease agreements for the Del Rio, Texas properties expire December 2015.  The lease agreement for the California property expires March 2021.  The Chihuahua, Mexico lease expires July 2015.  The Tijuana, Mexico lease expires November 2018.  The lease agreement for the Ho Chi Minh City, Vietnam property expires July 2015.  The Company’s manufacturing facilities located in Acuna, Mexico and Elk Grove Village, Illinois are owned by the Company, except for a portion of the facility in Acuna, Mexico, which is leased.  The Company has an option to buy the leased portion of the facility in Acuna, Mexico.  The property in Elk Grove Village, Illinois is financed under a separate mortgage loan agreement, the final payment on which is due January 2015.  The Company leases the IPO office in Taipei, Taiwan to coordinate Far East purchasing activities.  The Company believes its current facilities are adequate to meet its current needs.  In addition, the Company believes it can find alternative facilities to meet its needs in the future, if required.

 

 

ITEM 3.  LEGAL PROCEEDINGS

 

As of April 30, 2014, the Company was not a party to any material legal proceedings.

 

From time to time the Company is involved in legal proceedings, claims or investigations that are incidental to the conduct of the Company’s business.  In future periods, the Company could be subjected to cash cost or non-cash charges to earnings if any of these matters are resolved on unfavorable terms.  However, although the ultimate outcome of any legal matter cannot be predicted with certainty, based on present information, including management’s assessment of the merits of any particular claim, the Company does not expect that

---

 

these legal proceedings or claims will have any material adverse impact on its future consolidated financial position or results of operations.

 

 

ITEM 4.  MINE SAFETY DISCLOSURES

 

Not applicable.

 

 

 

PART II

 

 

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Market Information

 

The Company’s common stock is traded on the NASDAQ Capital Market System under the symbol SGMA.  The following table sets forth the range of quarterly high and low sales price information for the common stock for the periods ended April 30, 2014 and 2013.

 

 

Common Stock as Reported

by NASDAQ

 

 

 

As of July 21, 2014, there were approximately 50 holders of record of the Company’s common stock, which does not include shareholders whose stock is held through securities position listings.  The Company estimates there to be approximately 1,240 beneficial owners of the Company’s common stock.

 

The Company has not paid cash dividends on its common stock since completing its February 1994 initial public offering and does not intend to pay any dividends in the foreseeable future.  So long as any indebtedness remains unpaid under the Company’s revolving loan facility, the Company is prohibited from paying or declaring any dividends on any of its capital stock, except stock dividends, without the written consent of the lender under the facility.

 

---

 

Equity Compensation Plan Information

 

For information concerning securities authorized for issuance under our equity compensation plans, see Part III, Item 12 of this Annual Report, under the caption “Security Ownership of Certain Beneficial Owners and Management and Related Stockholders Matters” as well as the Company’s audited financial statements and notes thereto, including Note P, filed herewith and all such information is incorporated herein by reference.

 

 

ITEM 6.    SELECTED FINANCIAL DATA 

 

As a smaller reporting company, as defined in Rule 10(f)(1) of Regulation S-K under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), we are not required to provide the information required by this item.

 

 

ITEM 7.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION

                AND RESULTS OF OPERATIONS

 

In addition to historical financial information, this discussion of the business of SigmaTron International, Inc. (“SigmaTron”), its wholly-owned subsidiaries Standard Components de Mexico S.A., AbleMex, S.A. de C.V., Digital Appliance Controls de Mexico, S.A. de C.V., Spitfire Controls (Vietnam) Co. Ltd., Spitfire Controls (Cayman) Co. Ltd., wholly-owned foreign enterprises Wujiang SigmaTron Electronics Co., Ltd. and SigmaTron Electronic Technology Co., Ltd. (collectively, “SigmaTron China”) and international procurement office SigmaTron Taiwan branch (collectively, the “Company”) and other Items in this Annual Report on Form 10-K contain forward-looking statements concerning the Company’s business or results of operations.  Words such as “continue,” “anticipate,” “will,” “expect,” “believe,” “plan,” and similar expressions identify forward-looking statements.  These forward-looking statements are based on the current expectations of the Company.  Because these forward-looking statements involve risks and uncertainties, the Company’s plans, actions and actual results could differ materially.  Such statements should be evaluated in the context of the risks and uncertainties inherent in the Company’s business including, but not necessarily limited to, the Company’s continued dependence on certain significant customers; the continued market acceptance of products and services offered by the Company and its customers; pricing pressures from the Company’s customers, suppliers and the market; the activities of competitors, some of which may have greater financial or other resources than the Company; the variability of our operating results; the results of long-lived assets and goodwill impairment testing; the variability of our customers’ requirements; the availability and cost of necessary components and materials; the ability of the Company and our customers to keep current with technological changes within our industries; regulatory compliance, including conflict minerals; the continued availability and sufficiency of our credit arrangements; changes in U.S., Mexican, Chinese, Vietnamese or Taiwanese regulations affecting the Company’s business; the turmoil in the global economy and financial markets; the stability of the U.S., Mexican, Chinese, Vietnamese and Taiwanese economic, labor and political systems and conditions; currency exchange fluctuations; and the ability of the Company to manage its growth.  These and other factors which may affect the Company’s future business and results of operations are identified throughout this Annual Report and as risk factors, and may be detailed from time to time in the Company’s filings with the Securities and Exchange Commission.  These statements speak as of the date of such filings, and the Company undertakes no obligation to update such statements in light of future events or otherwise unless otherwise required by law.

 

Overview

 

The Company operates in one business segment as an independent provider of EMS, which includes printed circuit board assemblies and completely assembled (box-build) electronic products.  In connection with the production of assembled products, the Company also provides services to its customers, including (1) automatic and manual assembly and testing of products; (2) material sourcing and procurement; (3) manufacturing and test engineering support; (4) design services; (5) warehousing and distribution services; and (6) assistance in obtaining product approval from governmental and other regulatory bodies.  The Company provides these manufacturing services through an international network of facilities located in the United States, Mexico, China, Vietnam and Taiwan.

 

---

 

On May 31, 2012, SigmaTron acquired certain assets and assumed certain liabilities of Spitfire.   Spitfire was a privately held Illinois corporation with captive manufacturing sites in Chihuahua, Mexico and suburban Ho Chi Minh City, Vietnam.  Both manufacturing sites were among the assets acquired by the Company.  Spitfire was an original equipment manufacturer of electronic controls, with a focus on the major appliance (white goods) industry.  Although North America is currently its primary market, Spitfire has applications that can be used worldwide.  The Company provided manufacturing solutions for Spitfire since 1994, and was a strategic partner to Spitfire as it developed its OEM electronic controls business.

 

The Company’s Spitfire division provides cost effective designs as control solutions for its customers, primarily in high volume applications of domestic cooking ranges, dishwashers, refrigerators, and portable appliances.  It is a member of the AHAM, as well as other industry related trade associations and is ISO 9001:2008 certified.  The acquisition has enabled the Company to offer design services for the first time in specific markets.

 

The Company relies on numerous third-party suppliers for components used in the Company’s production process.  Certain of these components are available only from single-sources or a limited number of suppliers.  In addition, a customer’s specifications may require the Company to obtain components from a single-source or a small number of suppliers.  The loss of any such suppliers could have a material impact on the Company’s results of operations.  Further, the Company could operate at a cost disadvantage compared to competitors who have greater direct buying power from suppliers.  The Company does not enter into long-term purchase agreements with major or single-source suppliers.  The Company believes that short-term purchase orders with its suppliers provides flexibility, given that the Company’s orders are based on the changing needs of its customers.

 

Sales can be a misleading indicator of the Company’s financial performance.  Sales levels can vary considerably among customers and products depending on the type of services (consignment versus turnkey) rendered by the Company and the demand by customers.  Consignment orders require the Company to perform manufacturing services on components and other materials supplied by a customer, and the Company charges only for its labor, overhead and manufacturing costs, plus a profit.  In the case of turnkey orders, the Company provides, in addition to manufacturing services, the components and other materials used in assembly.  Turnkey contracts, in general, have a higher dollar volume of sales for each given assembly, owing to inclusion of the cost of components and other materials in net sales and cost of goods sold.  Variations in the number of turnkey orders compared to consignment orders can lead to significant fluctuations in the Company’s revenue and gross margin levels.  Consignment orders accounted for less than 5% of the Company’s revenues for each of the fiscal years ended April 30, 2014 and 2013.

 

In an effort to facilitate growth of our China operation, the Company established a new Chinese entity in October 2011 that allows the Company to provide services competitively to the domestic market in China.  Nonetheless, in fiscal year 2013 and 2014, the Company continued to see a trend of Chinese costs increasing, thereby making Mexico a more cost-competitive manufacturing location to service North America.  Indications suggest that this trend will continue.

 

The Company’s international footprint provides our customers with flexibility within the Company to manufacture in China,  Mexico,  Vietnam or the U.S.    We believe this strategy has continued to serve the Company well during these difficult economic times as its customers continuously evaluate their supply chain strategies.

 

The Company had a better year financially in fiscal 2014 compared to fiscal 2013.  The improvement was driven in part by leveraging higher revenues while continuing to drive increased efficiency and productivity into the Company’s operations, including the integration of the Spitfire acquisition.  The Company’s industry remains challenging and pricing pressures continue from both its customers and supply chain.  The Company intends to continue to attempt to make progress in terms of productivity and increased revenues.  The Company believes revenue growth will continue with its current customers and through the recent addition of several new customers, which it hopes will become long term valued relationships.  The Company believes it has opportunity for new revenue, but nothing is certain and the stagnant economy tends to slow the process.  In the past, the timing of production and delivery of orders, primarily at the direction of customers, has caused, and likely will continue to cause, the Company to experience significant quarterly fluctuations in its revenues and earnings.

 

---

 

Due to the acquisition of Spitfire, effective June 1, 2012, the Company discontinued selling to Spitfire and instead began selling directly to Spitfires’ customers.

 

On May 8, 2012, the Company entered into a real estate lease agreement to relocate its Tijuana, Mexico operation to a new facility within Tijuana, Mexico.  The relocation was completed in July 2012.  In fiscal 2013, the Company incurred approximately $424,000 in relocation expenses as a result of the move.  All incentives realized under the lease will be recognized over the term of the lease, which is five years.

 

Critical Accounting Policies:

Management Estimates and Uncertainties - The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period.  Significant estimates made in preparing the consolidated financial statements include depreciation and amortization periods, the allowance for doubtful accounts, reserves for inventory and valuation of long-lived assets.  Actual results could materially differ from these estimates.

Revenue Recognition - Revenues from sales of the Company's electronic manufacturing services business are recognized when the finished good product is shipped to the customer.  In general, and except for consignment inventory, it is the Company's policy to recognize revenue and related costs when the finished goods have been shipped from its facilities, which is also the same point that title passes under the terms of the purchase order.  Finished goods inventory for certain customers is shipped from the Company to an independent warehouse for storage or shipped directly to the customer and stored in a segregated part of the customer’s own facility.  Upon the customer’s request for finished goods inventory, the inventory is shipped to the customer if the inventory was stored off-site, or transferred from the segregated part of the customer’s facility for consumption or use by the customer.  The Company recognizes revenue upon such shipment or transfer.  The Company does not earn a fee for such arrangements.  The Company from time to time may ship finished goods from its facilities, which is also the same point that title passes under the terms of the purchase order, and invoice the customer at the end of the calendar month.  This is done only in special circumstances to accommodate a specific customer.  Further, from time to time customers request the Company hold finished goods after they have been invoiced to consolidate finished goods for shipping purposes.  The Company generally provides a 90 day warranty for workmanship only, except for products with proprietary design and does not have any installation, acceptance or sales incentives (although the Company has negotiated longer warranty terms in certain instances).  The Company assembles and tests assemblies based on customers’ specifications.  Historically, the amount of returns for workmanship issues has been de minimis under the Company’s standard or extended warranties.

Inventories - Inventories are valued at the lower of cost or market.  Cost is calculated as average cost.  In the event of an inventory write-down, the Company records expense to state the inventory at lower of cost or market.  The Company establishes inventory reserves for valuation, shrinkage, and excess and obsolete inventory.  The Company records provisions for inventory shrinkage based on historical experience to account for unmeasured usage or loss.  Actual results differing from these estimates could significantly affect the Company’s inventories and cost of products sold.  The Company records provisions for excess and obsolete inventories for the difference between the cost of inventory and its estimated realizable value based on assumptions about future product demand and market conditions.  Actual product demand or market conditions could be different than that projected by management.

 

---

 

Goodwill - Goodwill represents the purchase price in excess of the fair value of assets acquired in business combinations.  Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 350, “Goodwill and other Intangible Assets,” requires the Company to assess goodwill and other indefinite-lived intangible assets for impairment at least annually in the absence of an indicator of possible impairment and immediately upon an indicator of possible impairment.  The Company is permitted the option to first assess qualitative factors to determine whether the existence of events and circumstances indicates that it is more likely than not that the fair value of any reporting unit is less than its corresponding carrying value.  If, after assessing the totality of events and circumstances, the Company concludes that it is not more likely than not that the fair value of any reporting unit is less than its corresponding carrying value then the Company is not required to take further action.  However, if the Company concludes otherwise, then it is required to perform a quantitative impairment test, including computing the fair value of the reporting unit and comparing that value to its carrying value.  If the fair value is less than its carrying value, a second step of the test is required to determine if recorded goodwill is impaired.  The Company also has the option to bypass the qualitative assessment for goodwill in any period and proceed directly to performing the quantitative impairment test.  The Company will be able to resume performing the qualitative assessment in any subsequent period.  The Company performed its annual goodwill impairment test as of February 1, 2014 and determined no impairment existed as of that date.

Impairment of Long-Lived Assets - The Company reviews long-lived assets, including amortizable intangible assets for impairment.  Property, machinery and equipment and finite life intangible assets are reviewed whenever events or changes in circumstances occur that indicate possible impairment.  If events or changes in circumstances occur that indicate possible impairment, the Company’s impairment review is based on an undiscounted cash flow analysis at the lowest level at which cash flows of the long-lived assets are largely independent of other groups of its assets and liabilities.  This analysis requires management judgment with respect to changes in technology, the continued success of product lines, and future volume, revenue and expense growth rates.  The Company conducts annual reviews for idle and underutilized equipment, and reviews business plans for possible impairment.  Impairment occurs when the carrying value of the assets exceeds the future undiscounted cash flows expected to be earned by the use of the asset group.  When impairment is indicated, the estimated future cash flows are then discounted to determine the estimated fair value of the asset or asset group and an impairment charge is recorded for the difference between the carrying value and the estimated fair value.

Income Tax -  The Company’s income tax expense, deferred tax assets and liabilities and reserves for unrecognized tax benefits reflect management’s best assessment of estimated future taxes to be paid.  The Company is subject to income taxes in both the U.S. and several foreign jurisdictions.  Significant judgments and estimates by management are required in determining the consolidated income tax expense assessment.

 

Deferred income taxes arise from temporary differences between the tax and financial statement recognition of revenue and expense and tax credit carry forwards.  In evaluating our ability to recover our deferred tax assets within the jurisdiction from which they arise, the Company considers all available positive and negative evidence, including scheduled reversals of deferred tax liabilities, projected future taxable income, tax planning strategies and recent financial operations.  In projecting future taxable income, the Company begins with historical results adjusted for the results of discontinued operations and changes in accounting policies, and incorporates assumptions including the amount of future state, federal and foreign pretax operating income, the reversal of temporary differences, and the implementation of feasible and prudent tax planning strategies.  These assumptions require significant judgment and estimates by management about the forecasts of future taxable income and are consistent with the plans and estimates the Company uses to manage the underlying businesses.  In evaluating the objective evidence that historical results provide, the Company considers three years of cumulative operating income and/or loss.

 

The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax laws and regulations in a multitude of jurisdictions across our global operations.  Changes in tax laws and rates could also affect recorded deferred tax assets and liabilities in the future.  Management is not aware of any such changes that would have a material effect on the Company’s results of operations, cash flows or financial position.

 

---

 

A  tax benefit from an uncertain tax position may only be recognized when it is more likely than not that the position will be sustained upon examination, including resolutions of any related appeals or litigation processes, based on the technical merits.

 

The Company adjusts its tax liabilities when its judgment changes as a result of the evaluation of new information not previously available.  Due to the complexity of some of these uncertainties, the ultimate resolution may result in a payment that is materially different from our current estimate of the tax liabilities.  These differences will be reflected as increases or decreases to income tax expense in the period in which they are determined.

 

New Accounting Standards:

 

In April 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2014-08, "Presentation of Financial Statements (Topic 205) and Property, Plant and Equipment (Topic 360)."  ASU 2014-08 amends the requirements for reporting discontinued operations and requires additional disclosures about discontinued operations.  Under the new guidance, only disposals representing a strategic shift in operations or that have a major effect on the Company's operations and financial results should be presented as discontinued operations.  This new accounting guidance is effective for annual periods beginning after December 15, 2014.  The Company is currently evaluating the impact of adopting ASU 2014-08 on the Company's results of operations or financial condition.

 

In May 2014, the FASB issued ASU No. 2014-09, "Revenue from Contracts with Customers."  This ASU is a comprehensive new revenue recognition model that requires a company to recognize revenue to depict the transfer of goods or services to a customer at an amount that reflects the consideration it expects to receive in exchange for those goods or services. This ASU is effective for annual reporting periods beginning after December 15, 2016 and early adoption is not permitted.  Accordingly, we will adopt this ASU on May 1, 2017.  Companies may use either a full retrospective or modified retrospective approach to adopt this ASU and we are currently evaluating which transition approach to use and the full impact this ASU will have on our future financial statements.

 

Results of Operations:

 

FISCAL YEAR ENDED APRIL 30, 2014 COMPARED

TO FISCAL YEAR ENDED APRIL 30, 2013

 

The following table sets forth the percentage relationships of expense items to net sales for the years indicated:

 

 

 

 

Net sales increased 12.1% to $222,485,940 in fiscal year 2014 from $198,439,534 in the prior year.  The Company’s sales increased in fiscal year 2014 in consumer electronics, appliance and medical/life sciences marketplaces as compared to the prior year.  The increase in sales dollars for these marketplaces was partially offset by a decrease in sales dollars in the industrial electronics, fitness, gaming, telecommunications and semiconductor marketplaces.  The increase in net sales for the fiscal year 2014 is a result of sales to customers

---

 

from the Spitfire acquisition, as well as the Company’s existing customers’ increased demand for product and new customers added during the fiscal year.

 

The Company’s sales in a particular industry are driven by the fluctuating forecasts and end-market demand of the customers within that industry.  Sales to customers are subject to variations from period to period depending on customer order cancellations, the life cycle of customer products and product transition.  Sales to the Company’s five largest customers accounted for 60% and 53% of net sales for fiscal years 2014 and 2013, respectively.

 

Gross profit increased to $22,826,998, or 10.3% of net sales, in fiscal year 2014 compared to $19,925,646, or 10.0% of net sales, in the prior fiscal year.  The increase in gross profit for fiscal year 2014 was primarily the result of increased sales to customers arising out of the Spitfire acquisition, as well as increased sales revenue from other existing customers.  The Company has achieved economies of scale integrating Spitfire into its operations, resulting in greater manufacturing efficiency.  The increase in gross profit in fiscal year 2014 was partially offset by a foreign currency loss of $128,000.

 

Selling and administrative expenses increased in fiscal year 2014 to $19,200,514, or 8.7% of net sales, compared to $18,358,354, or 9.3% of net sales, in fiscal year 2013.  The increase was attributable to salaries and other administrative expenses for the Spitfire operations, increased purchasing and accounting expenses and increased bonus expense.  The increase in the foregoing selling and administrative expenses were partially offset by a decrease in sales salaries and commission expenses and a reduction in professional legal and accounting fees.

 

Interest expense, net increased to $966,038 in fiscal year 2014 compared to $832,126 in fiscal year 2013.  The interest expense increased primarily due to the increased borrowings under the Company’s banking arrangements, capital lease and mortgage obligations.  Interest expense for fiscal year 2015 may increase if interest rates or borrowings, or both, increase during fiscal year 2015.

 

In fiscal year 2014, the income tax benefit was $133,867 compared to $321,363 in income tax expense in the fiscal year 2013.  The effective rate for the years ended April 30, 2014 and 2013 was (4.8%) and 39.5%, respectively.  The decrease in the effective rate for the year ended April 30, 2014 is due to the foreign tax differential and the $828,175 impact of recent tax legislation in Mexico which became effective on January 1, 2014.  The decrease in the effective tax rate was partially offset by a realized distribution from foreign subsidiaries resulting in income tax expense of $333,128 in fiscal 2014.

 

The Company reported net income of $2,918,691 in fiscal year 2014 compared to a net income of $492,961 for fiscal year 2013.  Basic and diluted earnings per share for fiscal year 2014 were $0.74 and $0.72, respectively, compared to basic and diluted earnings per share of $0.13 and $0.12 respectively, for the year ended April 30, 2013.

 

Liquidity and Capital Resources:

 

Operating Activities.

 

Cash flow provided by operating activities was $1,696,831 for the fiscal year ended April 30, 2014, compared to cash flow provided by operating activities of $3,710,531 for the prior fiscal year.  Cash flow provided by operating activities was primarily the result of net income, and the non-cash effects of depreciation and amortization.  Net cash provided by operations in fiscal year 2014 was partially offset by an increase of inventories of $3,083,636, and a $4,206,275 decrease in accounts payable.  The increase in inventory is primarily due to additional customer orders and the reduction of trade accounts payable is due to payments in the ordinary course of business.

 

---

 

Cash flow provided by operating activities was $3,710,531 for the fiscal year ended April 30, 2013.  Cash flow provided by operating activities was the result of net income, the non-cash effects of depreciation and amortization, stock-based compensation expense, an increase in trade accounts payable and deferred rent expenses.  The increase in accounts payable was due to timing of payments in the ordinary course of business.  Net cash provided by operations in fiscal year 2013 was partially offset by an increase of inventories of $5,615,748 primarily related to additional sales volume resulting from the Spitfire acquisition.

 

Investing Activities.

 

In fiscal year 2014, the Company purchased approximately $8,400,000 in machinery and equipment to be used in the ordinary course of business.  The Company has received forecasts from current customers for increased business that would require additional investment in inventory, capital equipment and facilities.  To the extent that these forecasts come to fruition the Company anticipates that it will make additional machinery and equipment purchases and potentially expand two manufacturing operations in fiscal year 2015 in the amount of $15,900,000.  The Company anticipates purchases and expansions will be funded by lease transactions, its senior secured credit facility or raising capital from other sources.  There is no assurance that the Company will be able to obtain equity or debt financing at acceptable terms, or at all, in the future.  There is no assurance that the Company will be able to retain or renew its credit agreements in the future, or that any retention or renewal will be on the same terms as currently exist. 

 

In fiscal year 2013, the Company purchased approximately $7,200,000 in machinery and equipment to be used in the ordinary course of business.  The Company purchases were funded by lease transactions and its bank line of credit.  The Company received approximately $1,142,000 in cash in conjunction with the Spitfire purchase.  In addition, the Company received $22,000 in cash for proceeds related to the sale of machinery and equipment.

 

Financing Activities.

 

Cash provided by financing activities was $7,501,796 for the fiscal year ended April 30, 2014, compared to cash provided by financing activities of $2,234,715 in fiscal year 2013.  Cash provided by financing activities in fiscal year 2014 was primarily the result of increased borrowings of $4,500,000 under the credit facility, proceeds received from a sale leaseback transaction for machinery and equipment and obtaining a mortgage for the Company’s facility in Elgin, Illinois.  The additional borrowings were required to support the purchases of machinery and equipment and the increase in inventory.

 

Cash provided by financing activities was $2,234,715 for the fiscal year ended April 30, 2013.  Cash provided by financing activities in fiscal year 2013 was primarily the result of increased borrowings of $2,500,000 under the credit facility.  The additional borrowings were required to support the purchases of machinery and equipment and the increases in both accounts receivable and inventory.

 

Financing Summary.

 

The Company has a senior secured credit facility with Wells Fargo with a credit limit up to $30,000,000 and an initial term through September 30, 2013.  The facility allows the Company to choose among interest rates at which it may borrow funds.  The credit facility is collateralized by substantially all of the domestically located assets of the Company and the Company has pledged 65% of its equity ownership interest in some of its foreign entities.  The Company is required to be in compliance with several financial covenants.  In conjunction with Spitfire acquisition, two of the financial covenants required by terms of the senior secured credit facility were amended as of May 31, 2012.  During the quarter ended October 31, 2013, the Company renewed its senior secured credit facility.  The facility was revised to extend the term of the agreement to October 31, 2015, amend its capital expenditure covenant, terminate the unused line fee and reduced its borrowing interest rates.  The renewed facility allows the Company to choose among interest rates at which it may borrow funds.  The interest rate is prime rate (effectively, 3.25% at April 30, 2014) or LIBOR plus two and a half percent (effectively, 2.75% at April 30, 2014), which is paid monthly.  In April 2013, the Company again amended its credit agreement and renegotiated two of the financial covenants required by the terms of the Company’s senior secured credit facility.  At April 30, 2014, the Company was in compliance with its amended financial covenants.  As of April 30, 2014, there was a $23,000,000 outstanding balance and $7,000,000 of unused availability under the credit facility, assuming the Company remained in compliance with its financial covenants.

---

 

 

The Company entered into a mortgage agreement on January 8, 2010, in the amount of $2,500,000, with Wells Fargo to refinance the property that serves as the Company’s corporate headquarters and its Illinois manufacturing facility.  The Company repaid the prior Bank of America mortgage, which equaled $2,565,413, as of January 8, 2010, using proceeds from the Wells Fargo mortgage and senior secured credit facility.  The Wells Fargo note bears interest at a fixed rate of 6.42% per year and is amortized over a sixty month period.  A final payment of approximately $2,000,000 is due on or before January 8, 2015.  The outstanding balance as of April 30, 2014  was $2,075,017.

 

On August 20, 2010 and October 26, 2010, the Company entered into two capital leasing transactions (a lease finance agreement and a sale leaseback agreement) with Wells Fargo Equipment Finance, Inc., to purchase equipment totaling $1,150,582.  The term of the lease finance agreement, with an initial principal amount of $315,252, extends to September 2016 with monthly payments of $4,973 and a fixed interest rate of 4.28%.  The term of the sale leaseback agreement, with an initial principal payment amount of $835,330, extends to August 2016 with monthly payments of $13,207 and a fixed interest rate of 4.36%.  At April 30, 2014, $136,561 and $338,562 was outstanding under the lease finance and sale leaseback agreements, respectively.  The net book value at April 30, 2014 of the equipment under each of the lease finance agreement and sale leaseback agreement was $221,114 and $550,583, respectively.

 

On November 29, 2010, the Company entered into a capital lease with Wells Fargo Equipment Finance, Inc., to purchase equipment totaling $226,216.  The term of the lease agreement extends to October 2016 with monthly payments of $3,627 and a fixed interest rate of 4.99%.  At April 30, 2014, the balance outstanding under the capital lease agreement was $102,099.  The net book value of the equipment under this lease at April 30, 2014 was $159,528.

 

The total amount outstanding at April 30, 2014 for the three remaining equipment lease transactions discussed above was $577,222.

 

In September 2010, the Company entered into a real estate lease agreement in Union City, CA, to rent 116,993 square feet of manufacturing and office space.  Under the terms of the lease agreement, the Company receives incentives over the life of the lease, which extends through March 2021.  The amount of the deferred rent income recorded for fiscal year 2014 was $17,770.  In addition, the landlord provided the Company tenant incentives of $418,000, which are being amortized over the life of the lease.

 

On May 2012, the Company entered into a lease agreement in Tijuana, MX, to rent 112,000 square feet of manufacturing and office space.  Under the terms of the lease agreement, the Company receives incentives over the life of the lease, which extends through November 2018.  The amount of the deferred rent expense recorded for fiscal year 2014 was $97,619.

 

On May 31, 2012, the Company completed the acquisition of Spitfire, an OEM of electronic controls, with a focus on the major appliance industry.  The acquisition added two manufacturing operations in locations that augment the Company’s footprint and add Spitfire’s design capabilities which allows the Company to offer design service for the first time in specific markets.  In conjunction with the Spitfire acquisition, the Company recorded goodwill and other intangible assets of $3,222,899 and $6,142,000, respectively.

 

On October 3, 2013, the Company entered into two capital leases (sale leaseback agreements) with Associated Bank, National Association to finance equipment purchased in June 2012 in the amount of $2,281,354.  The term of the first agreement, with an initial principal amount of $2,201,637, extends to September 2018 with monthly payments of $40,173 and a fixed interest rate of 3.75%.  The term of the second agreement, with an initial principal payment amount of $79,717, extends to September 2018 with monthly payments of $1,455 and a fixed interest rate of 3.75%.  At April 30, 2014, $1,959,381and $70,945 was outstanding under the first and second agreements, respectively.  The net book value at April 30, 2014 of the equipment under each of the two agreements was $1,828,038 and $68,092, respectively.

 

---

 

The Company entered into a mortgage agreement on October 24, 2013, in the amount of $1,275,000, with Wells Fargo to finance the property that serves as the Company’s engineering and design center in Elgin, Illinois.  The Wells Fargo note requires the Company to pay monthly principal payments in the amount of $4,250 and bears interest at a fixed rate of 4.5% per year and is payable over a sixty month period.  A final payment of approximately $1,030,000 is due on or before October 2018.  The outstanding balance as of April 30, 2014 was $1,249,500.

 

On March 6, 2014, the Company entered into a capital lease agreement with CIT Finance LLC to purchase equipment in the amount of $589,082.  The term of the lease extends to March 2019 with monthly payments of $10,441 and a fixed interest rate of $5.65%.  At April 30, 2014, the balance outstanding under the capital lease agreement was $581,415.  The net book value of the equipment under the lease of April 30, 2014 was $573,338.

 

The Company provides funds for salaries, wages, overhead and capital expenditure items as necessary to operate its wholly-owned Mexican, Vietnam and Chinese subsidiaries and the Taiwan IPO.  The Company provides funding in U.S. dollars, which are exchanged for Pesos, Dong, Renminbi, and New Taiwan dollars as needed.  The fluctuation of currencies from time to time, without an equal or greater increase in inflation, could have a material impact on the financial results of the Company.    The impact of currency fluctuation for the fiscal year ended April 30, 2014 and April 30, 2013 resulted in a foreign currency loss of approximately $128,000 and $359,000, respectively.  In fiscal year 2014, the Company paid approximately $51,200,000 to its foreign subsidiaries.  In fiscal year 2013, the Company’s wholly-owned trading company, SigmaTron International Trading Co. was liquidated.  The Company received a distribution of approximately $188,000 as a result of this liquidation.

 

During fiscal year 2014, the Company realized a distribution of approximately $3,006,825 from foreign subsidiaries based in Mexico. The U.S. income tax on the distribution was $333,128 which is reflected in the Company’s tax provision for the fiscal year ended April 30, 2014.  The distribution from the foreign subsidiaries based in Mexico does not change the Company’s intentions to indefinitely reinvest the income from the Company’s foreign subsidiaries.

 

The Company has not recorded U.S. income taxes for a significant portion of undistributed earnings of the Company’s foreign subsidiaries, since these earnings have been, and under current plans will continue to be, permanently reinvested in these foreign subsidiaries.  The cumulative amount of unremitted earnings for which U.S. income taxes have not been recorded is approximately $12,300,000, as of the end of fiscal year 2014.    The Company’s intent is to keep unrepatriated funds indefinitely reinvested outside of the United States and current plans do not demonstrate a need to fund U.S. operations.

 

The Company anticipates that its credit facilities, cash flow from operations and leasing resources are adequate to meet its working capital requirements and capital expenditures for fiscal year 2015 at the Company’s current level of business.  The Company has received forecasts from current customers for increased business that would require additional investment in inventory, capital equipment and facilities.  To the extent that these forecasts come to fruition, the Company intends to meet any increased capital requirements by seeking an increase in its secured line of credit or raising capital from other sources of debt or equity.  In addition, in the event the Company expands its operations, its business grows rapidly, the current economic climate deteriorates, customers delay payments, or the Company considers an acquisition, additional financing resources would be necessary in the current or future fiscal years.  There is no assurance that the Company will be able to obtain equity or debt financing at acceptable terms, or at all, in the future.  There is no assurance that the Company will be able to retain or renew its credit agreements in the future, or that any retention or renewal will be on the same terms as currently exist. 

 

The impact of inflation on the Company’s net sales, revenues and incomes from continuing operations for the past two fiscal years has been minimal.

 

Off-balance Sheet Transactions:

 

The Company has no off-balance sheet transactions.

 

---

 

Tabular Disclosure of Contractual Obligations:

 

As a smaller reporting company, as defined in Rule 10(f)(1) of Regulation S-K under the Exchange Act, we are not required to provide the information required by this item.

 

 

ITEM  7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISKS

 

As a smaller reporting company, as defined in Rule 10(f)(1) of Regulation S-K under the Exchange Act, we are not required to provide the information required by this item.

 

 

ITEM 8.  FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

The response to this item is included in Item 15(a) of this Report.

 

 

ITEM 9.  CHANGES AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING

AND FINANCIAL DISCLOSURE

 

None.

 

 

ITEM 9A.  CONTROLS AND PROCEDURES

 

Disclosure Controls:

 

Our management, including our President and Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), Rules 13a-15(e) and 15(d)-15(e)) as of April 30, 2014.  Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives and our President and Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective at the reasonable assurance level as of April 30, 2014.

 

Internal Controls:

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Exchange Act Rules 13a-15(f) and 15d-15(f).    Our internal controls over financial reporting are designed to provide reasonable assurance regarding the reliability of financial reporting and preparation of financial statements for external purposes in accordance with U.S. GAAP.  Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission.  Based on our evaluation, our management concluded that our internal control over financial reporting was effective at the reasonable assurance level as of April 30, 2014.

 

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting.  Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to the rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this annual report.

 

There has been no change in our internal control over financial reporting during the quarter ended April 30, 2014, that has materially affected or is reasonably likely to materially affect, our internal control over financial reporting.

 

---

 

 

ITEM 9B.    OTHER INFORMATION

 

Not Applicable.

 

 

PART III

 

 

 

ITEM 10.    DIRECTORS,  EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement, to be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended April 30, 2014.

 

 

ITEM 11.    EXECUTIVE COMPENSATION

 

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement, to be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended April 30, 2014.

 

 

ITEM 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT

                  AND RELATED STOCKHOLDER MATTERS

 

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement, to be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended April 30, 2014.

 

 

ITEM 13.  CERTAIN RELATIONSHIPS, RELATED TRANSACTIONS AND DIRECTOR

                 INDEPENDENCE

 

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement, to be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended April 30, 2014.

 

 

ITEM 14.    PRINCIPAL ACCOUNTANT FEES AND SERVICES

 

The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement, to be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended April 30, 2014.

 

---

 

 

 

PART IV

 

 

 

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

 

(a) 1 

The financial statements are listed in the Index to Financial Statements filed as part of this Annual Report on Form 10-K beginning on Page F-1.

 

 

 

---

 

Index to Exhibits

 

(a) 2

(a) 3 and (b)

 

 

 

 

* Indicates management contract or compensatory plan.

** Filed herewith

 

(c) Exhibits

 

The Company hereby files as exhibits to this Report the exhibits listed in Item 15(a)(3) above, which are

attached hereto or incorporated herein.

 

---

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

SIGMATRON INTERNATIONAL, INC.

 

 

 KNOW ALL PERSONS BY THESE PRESENTS, that the undersigned directors and officers of SigmaTron International, Inc., a Delaware corporation, which is filing an Annual Report on Form 10-K with the Securities and Exchange Commission under the provisions of the Securities Exchange Act of 1934 as amended, hereby constitute and appoint Gary R. Fairhead and Linda K. Frauendorfer, and each of them, each of their true and lawful attorneys-in fact and agents, with full power of substitution and resubstitution, for him and in his name, place and stead, in all capacities, to sign any or all amendments to the report to be filed with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as each of them might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents or any of them, or their substitute or substitutes, may lawfully do or cause to be done by virtue hereof.

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities, and on the dates indicated.

 

 

 

 

---

 

INDEX TO FINANCIAL STATEMENTS

 

 

Page

 

SigmaTron International, Inc. and Subsidiaries

 

 

 

 

Financial statement schedules are omitted because they are not applicable or required.

 

---

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

Board of Directors and Stockholders

SigmaTron International, Inc.

Elk Grove Village, Illinois

 

We have audited the accompanying consolidated balance sheets of SigmaTron International, Inc. as of April 30, 2014 and 2013  and the related consolidated statements of income, changes in stockholders' equity and cash flows for the years then ended.  These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement.  The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting.  Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting.  Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of SigmaTron International, Inc. at April 30, 2014 and 2013 and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

 

 

/s/ BDO USA, LLP

Chicago, Illinois

July 24,  2014

 

---

 

SigmaTron International, Inc. and Subsidiaries

CONSOLIDATED BALANCE SHEETS

APRIL 30,

 

 

 

The accompanying notes are an integral part of these statements.

---

 

SigmaTron International, Inc. and Subsidiaries

CONSOLIDATED BALANCE SHEETS - CONTINUED

APRIL 30,

 

 

 

 

 

The accompanying notes are an integral part of these statements.

---

 

SigmaTron International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF INCOME

Years ended April 30,

 

 

 

The accompanying notes are an integral part of these statements.

 

---

 

SigmaTron International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY

Years ended April 30,  2014 and 2013

 

 

 

 

The accompanying notes are an integral part of these statements.

 

 

---

 

SigmaTron International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF CASH FLOWS

Years ended April 30,

 

 

 

The accompanying notes are an integral part of these statements.

---

 

SigmaTron International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF CASH FLOWS - Continued

Years ended April 30,

 

 

 

 

 

 

 

 

The accompanying notes are an integral part of these statements.

 

 

 

 

 

 

 

---