SILICON LABORATORIES INC. - Annual Report: 2016 (Form 10-K)

Use these links to rapidly review the document
Table of Contents
Part IV

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K

Commission file number: 000-29823

SILICON LABORATORIES INC.
(Exact name of registrant as specified in its charter)

(512) 416-8500
(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

         Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ý Yes    o No

         Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. o Yes    ý No

         Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ý Yes    o No

         Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). ý Yes    o No

         Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

         Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

         Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). o Yes    ý No

         The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold as of the last business day of the registrant's most recently completed second fiscal quarter (July 1, 2016) was $1,951,606,092 (assuming, for this purpose, that only directors and officers are deemed affiliates).

         There were 41,890,791 shares of the registrant's common stock issued and outstanding as of January 23, 2017.

DOCUMENTS INCORPORATED BY REFERENCE

         Portions of the Proxy Statement for the registrant's 2016 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

Table of Contents

Table of Contents

Cautionary Statement

        Except for the historical financial information contained herein, the matters discussed in this report on Form 10-K (as well as documents incorporated herein by reference) may be considered "forward-looking" statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such forward-looking statements include declarations regarding the intent, belief or current expectations of Silicon Laboratories Inc. and its management and may be signified by the words "believe," "estimate," "expect," "intend," "anticipate," "plan," "project," "will" or similar language. You are cautioned that any such forward-looking statements are not guarantees of future performance and involve a number of risks and uncertainties. Actual results could differ materially from those indicated by such forward-looking statements. Factors that could cause or contribute to such differences include those discussed under "Risk Factors" and elsewhere in this report. Silicon Laboratories disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

1

Table of Contents

Part I

Item 1.    Business

General

        Silicon Laboratories Inc. is a provider of silicon, software and solutions for the Internet of Things (IoT), Internet infrastructure, industrial, consumer and automotive markets. We solve some of the electronics industry's toughest problems, providing customers with significant advantages in performance, energy savings, connectivity and design simplicity. Backed by our world-class engineering teams with strong software and mixed-signal design expertise, Silicon Laboratories empowers developers with the tools and technologies they need to advance quickly and easily from initial idea to final product.

        Mixed-signal integrated circuits (ICs) are electronic components that convert real-world analog signals, such as sound and radio waves, into digital signals that electronic products can process. Therefore, mixed-signal ICs are critical components in products addressing a variety of markets, including industrial, communications, consumer and automotive. Our world-class, mixed-signal ICs leverage standard complementary metal oxide semiconductor (CMOS), a low cost, widely available process technology. This enables smaller, more cost effective and energy efficient solutions. Our expertise in analog-intensive, mixed-signal IC design in CMOS allows us to develop new and innovative products that are highly integrated, simplifying our customers' designs and improving their time-to-market.

Industry Background

        The pervasiveness of connectivity and the explosion in mobile computing is driving semiconductor consumption. Intelligence is being added to electronic systems to enable remote monitoring, power efficiency and an improved user experience. This in turn is increasing the demand for bandwidth, requiring more infrastructure to support higher performance networks. The nearly ubiquitous availability of Internet access and the increasing intelligence of electronic devices and mobility are enabling what is called the Internet of Things, a term that describes the exponential increase in IP-enabled devices connected to the Internet.

        These trends require more and more interaction between the analog world we live in and the digital world of computing, and therefore require analog-intensive, mixed-signal circuits. Traditional mixed-signal designs relied upon solutions built with numerous, complex discrete analog and digital components. While these traditional designs provide the required functionality, they are often inefficient and inadequate for use in markets where size, cost, power consumption and performance are increasingly important product differentiators. In order to improve their competitive position, electronics manufacturers need to reduce the cost and complexity of their systems and enable new features or functionality to differentiate themselves from their competitors.

        Simultaneously, these manufacturers face accelerating time-to-market demands and must be able to rapidly adapt to evolving industry standards and new technologies. Because analog-intensive, mixed-signal design expertise is difficult to find, these manufacturers increasingly are turning to third parties, like us, to provide advanced mixed-signal solutions. Mixed-signal design requires specific expertise and relies on creative, experienced engineers to deliver solutions that optimize speed, power and performance, despite the noisy digital environment, and within the constraints of standard manufacturing processes. The development of this design expertise typically requires years of practical analog design experience under the guidance of a senior engineer, and engineers with the required level of skill and expertise are in short supply.

        Many IC solution providers lack sufficient analog expertise to develop compelling mixed-signal products. As a result, manufacturers of electronic devices value providers that can supply them with

2

Table of Contents

mixed-signal solutions with greater functionality, smaller size and lower power requirements at a reduced cost and shorter time-to-market.

Products

        We provide analog-intensive, mixed-signal solutions for use in a variety of electronic products in a broad range of applications for the IoT market including connected home, smart lighting, security, wearables and smart energy applications. We are a supplier of wireless connectivity solutions for the IoT based on Bluetooth®, zigbee®, Thread, Wi-Fi® and sub-GHz technologies.

        We provide a wide range of timing and isolation products for infrastructure applications including high-performance clocks and oscillators for networking equipment, data centers and wireless base stations, as well as digital isolators and current sensors for industrial power supplies, motor control, solar inverters and hybrid-electric vehicles. We also provide broadcast products, such as TV tuners and demodulators and automotive radio tuners, and access products including subscriber line interface circuits for voice over IP (VoIP), embedded modems, and Power over Ethernet (PoE) power source equipment and powered device ICs.

        Our products integrate complex mixed-signal functions that are frequently performed by numerous discrete components in competing products into a single chip or chipset. By doing so, we are able to create products that, when compared to many competing products:

•

Require less printed circuit board (PCB) space;



•

Reduce the use of external components lowering the system cost and simplifying design;



•

Offer superior performance improving our customers' end products;



•

Provide increased reliability and manufacturability, improving customer yields; and/or



•

Reduce system power requirements enabling smaller form factors and/or longer battery life.

        We group our products into the following categories:

•

Internet of Things products, which include our microcontroller (MCU), wireless, sensor and analog products;



•

Broadcast products, which include our broadcast consumer and automotive products;



•

Infrastructure products, which include our timing products (clocks and oscillators), and isolation devices; and



•

Access products, which include our VoIP products, embedded modems and our PoE devices.

3

Table of Contents

        The following table summarizes the diverse product areas and applications for the various products that we have introduced to customers:

4

Table of Contents

5

Table of Contents

        Revenues during fiscal 2016, 2015 and 2014 were generated predominately by sales of our mixed-signal products. The following summarizes our revenue by product category (in thousands):

Customers, Sales and Marketing

        We market our products through our direct sales force and through a network of independent sales representatives and distributors. Direct and distributor customers buy on an individual purchase order basis, rather than pursuant to long-term agreements.

        We consider our customer to be the end customer purchasing either directly from a distributor, a contract manufacturer or us. An end customer purchasing through a contract manufacturer typically instructs such contract manufacturer to obtain our products and incorporate such products with other components for sale by such contract manufacturer to the end customer. Although we actually sell the products to, and are paid by, the distributors and contract manufacturers, we refer to such end customer as our customer. Three of our distributors who sell to our customers, Edom Technology, Avnet and Arrow Electronics, each represented 17%, 13% and 11% of our revenues during fiscal 2016, respectively. No other distributor accounted for 10% or more of revenues for fiscal 2016.

6

Table of Contents

        During fiscal 2016, our ten largest end customers accounted for 25% of our revenues. We had no customer that represented more than 10% of our revenues during this period.

        We maintain numerous sales offices in Asia, the Americas and Europe. Revenue is attributed to a geographic area based on the shipped-to location. The percentage of our revenues derived from outside of the United States was 86% in fiscal 2016. For further information regarding our revenues and long-lived assets by geographic area, see Note 17, Segment Information, to the Consolidated Financial Statements.

        Our direct sales force is comprised of a number of sales professionals who possess varied levels of responsibility and experience, including directors, country managers, regional sales managers, district sales managers, strategic account managers, field sales engineers and sales representatives. We also utilize independent sales representatives and distributors to generate sales of our products. We have relationships with many independent sales representatives and distributors worldwide whom we have selected based on their understanding of the mixed-signal marketplace and their ability to provide effective field sales applications support for our products.

        Our marketing efforts are targeted at both identified industry leaders and emerging market participants. Direct marketing activities are supplemented by a focused marketing communications effort that seeks to raise awareness of our company and products. Our public relations efforts are focused on leading trade and business publications. Our external website is used to deliver corporate and product information. We also pursue targeted advertising in key trade publications and we have a cooperative marketing program that allows our distributors and representatives to promote our products to their local markets in conjunction with their own advertising activities. Finally, we maintain a presence at strategic trade shows and industry events. These activities, in combination with direct sales activities, help drive demand for our products.

        Due to the complex and innovative nature of our products, we employ experienced applications engineers who work closely with customers and distributors to support the design-win process, and can significantly accelerate the customer's time to market. A design-win occurs when a customer has designed our ICs into its product architecture and ordered product from us. A considerable amount of effort to assist the customer in incorporating our ICs into its products is typically required prior to any sale. In many cases, our innovative ICs require significantly different implementations than existing approaches and, therefore, successful implementations may require extensive communication with potential customers. The amount of time required to achieve a design-win can vary substantially depending on a customer's development cycle, which can be relatively short (such as three months) or very long (such as two years) based on a wide variety of customer factors. Not all design wins ultimately result in revenue, or may result in less revenue than expected. However, once a completed design architecture has been implemented and produced in high volumes, our customers are reluctant to significantly alter their designs due to this extensive design-win process. We believe this process, coupled with our intellectual property protection, promotes relatively longer product life cycles for our products and high barriers to entry for competitive products, even if such competing products are offered at lower prices. Our close collaboration with our customers provides us with knowledge of derivative product ideas or completely new product line offerings that may not otherwise arise in other new product discussions.

Research and Development

        Through our research and development efforts, we leverage experienced analog and mixed-signal engineering talent and expertise to create new ICs that integrate functions typically performed inefficiently by multiple discrete components. This integration generally results in lower costs, smaller die sizes, lower power demands and enhanced price/performance characteristics. We attempt to reuse successful techniques for integration in new applications where similar benefits can be realized. We

7

Table of Contents

believe that we have attracted many of the best engineers in our industry. We believe that reliable and precise analog and mixed-signal ICs can only be developed by teams of engineers who have significant analog experience and are familiar with the intricacies of designing these ICs for commercial volume production. The development of test methodologies is just one example of a critical activity requiring experience and know-how to enable the rapid release of a new product for commercial success. We have accumulated a vast set of trade secrets that allow us to pursue innovative approaches to mixed-signal problems that are difficult for competitors to duplicate. We highly value our engineering talent and strive to maintain a very high bar when bringing new recruits to the company.

        Research and development expenses were $199.7 million, $188.1 million and $173.0 million and in fiscal 2016, 2015 and 2014, respectively.

Technology

        Our product development process facilitates the design of highly-innovative, analog-intensive, mixed-signal ICs. Our engineers' deep knowledge of existing and emerging standards and performance requirements helps us to assess the technical feasibility of a particular IC. We target areas where we can provide compelling product improvements. Once we have solved the primary challenges, our field application engineers continue to work closely with our customers' design teams to maintain and develop an understanding of our customers' needs, allowing us to formulate derivative products and refined features.

        In providing mixed-signal ICs for our customers, we believe our key competitive advantages are:

•

Analog and RF design expertise in CMOS;



•

Digital signal processing, firmware and system design expertise;



•

Microcontroller and system on a chip design expertise;



•

Software expertise, including multiprotocol connectivity and real-time operating systems for the IoT;



•

Module integration and design expertise; and



•

Our broad understanding of systems technology and trends.

        To fully capitalize on these advantages, we have assembled a world-class development team with exceptional analog and mixed-signal design expertise led by accomplished senior engineers.

Analog and RF Design Expertise in CMOS

        We believe that our most significant core competency is world-class analog and RF design capability. Additionally, we strive to design substantially all of our ICs in standard CMOS processes. While it is often significantly more difficult to design analog ICs in CMOS, CMOS provides multiple benefits versus existing alternatives, including significantly reduced cost, reduced technology risk and greater worldwide foundry capacity. CMOS is the most commonly used process technology for manufacturing digital ICs and as a result is most likely to be used for the manufacturing of ICs with finer line geometries. These finer line geometries can enable smaller and faster ICs. By designing our ICs in CMOS, we enable our products to benefit from this trend towards finer line geometries, which allows us to integrate more digital functionality into our mixed-signal ICs.

        Designing analog and mixed-signal ICs is significantly more complicated than designing standalone digital ICs. While advanced software tools exist to help automate digital IC design, there are far fewer tools for advanced analog and mixed-signal IC design. In many cases, our analog circuit design efforts begin at the fundamental transistor level. We believe that we have a demonstrated ability to design the most difficult analog and RF circuits using standard CMOS technologies.

8

Table of Contents

Digital Signal Processing, Firmware and System Design Expertise

        We consider the partitioning of a circuit to be a proprietary and creative design technique. Deep systems knowledge allows us to use our digital signal processing (DSP) design expertise to maximize the price/performance characteristics of both the analog and digital functions and allow our ICs to work in an optimized manner to accomplish particular tasks. Generally, we attempt to move analog functions into the digital domain as quickly as possible, creating system efficiencies without compromising performance. These patented approaches require our advanced DSP and systems expertise. We then leverage our firmware know-how to change the 'personality' of our devices, optimizing features and functions needed by various markets we serve. For example, our broadcast audio products use a proven digital low-IF receiver and transmitter architecture to deliver superior RF performance and interference rejection compared to traditional, analog-only approaches. Digital signal processing is utilized to optimize sound quality under varying signal conditions, enabling a better consumer experience. Firmware has enabled us to rapidly expand the portfolio to address multiple markets without substantial silicon changes, including shortwave, longwave, analog tuned, digital tuned and even high performance HD-capable automotive radios.

Microcontroller and System on a Chip Design Expertise

        We have the talent and circuit integration methodologies required to combine precision analog, high-speed digital, flash memory and in-system programmability into a single, monolithic CMOS integrated circuit. Our microcontroller products are designed to capture an external analog signal, convert it to a digital signal, compute digital functions on the stream of data and then communicate the results through a standard digital interface. The ability to develop standard products with the broadest possible customer application base while being cost efficient with the silicon area of the monolithic CMOS integrated circuit requires a keen sense of customer value and engineering capabilities. Additionally, to manage the wide variety of signals on a monolithic piece of silicon including electrical noise, harmonics and other electronic distortions requires a fundamental knowledge of device physics and accumulated design expertise.

Software Expertise

        Our software expertise allows us to develop products for markets where intelligent data capture, high-performance processing and communication are increasingly important product differentiators. The software we have developed to address these markets enable machine-to-machine communications, providing intelligence to electronic systems. Our products integrate high-performance, low-power wireless and microcontroller ICs with reliable and scalable software into a flexible and robust networking platform.

        The demand for low-power, small-footprint wireless technology is accelerating as more and more IP-enabled end points are being connected to the Internet of Things (IoT). Our software enables a broad range of power-sensitive applications for the IoT, including smart energy, home automation, security and other connected products. We believe that the combination of our software and IC design expertise differentiates us from many of our competitors.

        As the IoT continues to mature, a new class of embedded applications is emerging, presenting feature-rich and task-intensive use cases. This growing complexity is driving the need for real-time operating systems to help simplify software development for IoT applications by coordinating and prioritizing multiprotocol connectivity, SoC peripherals and other system-level activities. In addition to being able to manage numerous application tasks, an RTOS enhances scalability, and makes complex applications predictable and reliable. To address these application needs, we acquired Micrium, an embedded RTOS provider. Micrium has established itself as a reliable, high performance and trusted RTOS software platform, with an installed base that has grown to millions of devices.

9

Table of Contents

Module Integration and Design Expertise

        The market for wireless modules has grown as customers search for solutions that provide turnkey wireless connectivity to their products. The development of modules is difficult due to stringent requirements, including high levels of integration and programmability, performance, reliability, security and power efficiency. In addition, designs must meet numerous wireless standards deployed in various environments and serving diverse requirements.

        Our combined expertise in IC design and software allows us to engineer the development of our modules to create a robust, high-performance connection in challenging wireless environments. We have developed wireless modules based on numerous wireless standards, including Bluetooth, zigbee, Thread, Wi-Fi and sub-GHz. We believe our demonstrated proficiency in the design of modules provides our customers with significant advantages.

Understanding of Systems Technology and Trends

        Our focused expertise in mixed-signal ICs is the result of the breadth of engineering talent we have assembled with experience working in analog-intensive CMOS design for a wide variety of applications. This expertise, which we consider a competitive advantage, is the foundation of our in-depth understanding of the technology and trends that impact electronic systems and markets. Our expertise includes:

•

Isolation, which is critical for existing and emerging industrial applications and telecom networks;



•

Frequency synthesis, which is core technology for wireless and clocking applications;



•

Integration, which enables the elimination of discrete components in a system; and



•

Signal processing and precision analog, which forms the heart of consumer, industrial, medical and automotive electronics applications.

        Our understanding of the role of analog/digital interfaces within electronic systems, standards evolution, and end market drivers enables us to identify product development opportunities and capitalize on market trends.

Manufacturing

        As a fabless semiconductor company, we conduct IC design and development in our facilities and electronically transfer our proprietary IC designs to third-party semiconductor fabricators who process silicon wafers to produce the ICs that we design. Our IC designs typically use industry-standard CMOS manufacturing process technology to achieve a level of performance normally associated with more expensive special-purpose IC fabrication technology. We believe the use of CMOS technology facilitates the rapid production of our ICs within a lower cost framework. Our IC production employs submicron process geometries which are readily available from leading foundry suppliers worldwide, thus increasing the likelihood that manufacturing capacity will be available throughout our products' life cycles. We currently partner with Taiwan Semiconductor Manufacturing Co. (TSMC) or TSMC's affiliates and Semiconductor Manufacturing International Corporation (SMIC) to manufacture the majority of our semiconductor wafers. We believe that our fabless manufacturing model significantly reduces our capital requirements and allows us to focus our resources on design, development and marketing of our ICs.

        Once the silicon wafers have been produced, they are shipped directly to our third-party assembly subcontractors. The assembled ICs are then moved to the final testing stage. This operation can be performed by the same contractor that assembled the IC, other third-party test subcontractors or within our internal facilities prior to shipping to our customers. During fiscal 2016, most of our units shipped

10

Table of Contents

were tested by offshore third-party test subcontractors. We expect that our utilization of offshore third-party test subcontractors will remain substantial during fiscal 2017.

Backlog

        We include in backlog accepted product purchase orders from customers and worldwide distributor stocking orders. We only include orders with an expected shipping date from us within six months. Product orders in our backlog are subject to changes in delivery schedules or cancellation at the option of the purchaser typically without penalty. Our backlog may fluctuate significantly depending upon customer order patterns which may, in turn, vary considerably based on rapidly changing business circumstances. Shipments to distributors are not recognized as revenue until the products are sold by the distributors. Additionally, our arrangements with distributors typically provide for price protection and stock rotation activities. Accordingly, we do not believe that our backlog at any time is necessarily representative of actual sales for any succeeding period.

Competition

        The markets for semiconductors generally, and for analog and mixed-signal ICs in particular, are intensely competitive. We anticipate that the market for our products will continually evolve and will be subject to rapid technological change. We believe the principal competitive factors in our industry are:

        We believe that we are competitive with respect to these factors, particularly because our ICs typically are smaller in size, are highly integrated, achieve high performance specifications at lower price points than competitive products and are manufactured in standard CMOS which generally enables us to supply them on a relatively rapid basis to customers to meet their product introduction schedules. However, disadvantages we face include our relatively short operating history in certain of our markets and the need for customers to redesign their products and modify their software to implement our ICs in their products.

        Due to our diversified product portfolio and the numerous markets and applications we serve, we target a relatively large number of competitors. We compete with Analog Devices, Broadcom, Conexant, Cypress, IDT, Marvell Technology Group, Maxim Integrated Products, MaxLinear, Microchip, Microsemi, Nordic Semiconductor, NXP Semiconductors, Qualcomm, Renesas, STMicroelectronics, Texas Instruments, Vectron International and others. We expect to face competition in the future from our current competitors, other manufacturers and designers of semiconductors and start-up semiconductor design companies. Our competitors may also offer bundled solutions offering a more complete product, which may negatively impact our competitive position despite the technical merits or advantages of our products. In addition, our customers could develop products or technologies internally that would replace their need for our products and would become a source of competition. We could also face competition from module makers or other systems suppliers that may include mixed-signal components in their products that could eliminate the need for our ICs.

        Many of our competitors and potential competitors have longer operating histories, greater name recognition, access to larger customer bases, complementary product offerings, and significantly greater financial, sales and marketing, manufacturing, distribution, technical and other resources than us. Current and potential competitors have established or may establish financial and strategic relationships between themselves or with our existing or potential customers, resellers or other third parties.

11

Table of Contents

Accordingly, it is possible that new competitors or alliances among competitors could emerge and rapidly acquire significant market share.

Intellectual Property

        Our future success depends in part upon our proprietary technology. We seek to protect our technology through a combination of patents, copyrights, trade secrets, trademarks and confidentiality procedures. As of December 31, 2016, we had approximately 1,516 issued or pending United States and foreign patents. There can be no assurance that patents will ever be issued with respect to our patent applications. Furthermore, it is possible that any patents held by us may be invalidated, circumvented, challenged or licensed to others. In addition, there can be no assurance that such patents will provide us with competitive advantages or adequately safeguard our proprietary rights. While we continue to file new patent applications with respect to our recent developments, existing patents are granted for prescribed time periods and will expire at various times in the future.

        We claim copyright protection for proprietary documentation for our products. We have filed for registration, or are in the process of filing for registration, the visual images of certain ICs with the U.S. Copyright Office. We have registered the "Silicon Labs" logo and a variety of other product and product family names as trademarks in the United States and selected foreign jurisdictions. All other trademarks, service marks or trade names appearing in this report are the property of their respective owners. We also attempt to protect our trade secrets and other proprietary information through agreements with our customers, suppliers, employees and consultants, and through other customary security measures. We intend to protect our rights vigorously, but there can be no assurance that our efforts will be successful. In addition, the laws of other countries in which our products are sold may not protect our products and intellectual property rights to the same extent as the laws of the United States.

        While our ability to effectively compete depends in large part on our ability to protect our intellectual property, we believe that our technical expertise and ability to introduce new products in a timely manner will be an important factor in maintaining our competitive position.

        Many participants in the semiconductor and electronics industries have a significant number of patents and have frequently demonstrated a readiness to commence litigation based on allegations of patent and other intellectual property infringement. From time to time, third parties may assert infringement claims against us. We may not prevail in any such litigation or may not be able to license any valid and infringed patents from third parties on commercially reasonable terms, if at all. Litigation, regardless of the outcome, is likely to result in substantial cost and diversion of our resources, including our management's time. Any such litigation could materially adversely affect us.

        Our licenses include industry standard licenses with our vendors, such as wafer fabrication tool libraries, third-party core libraries, computer-aided design applications and business software applications.

Employees

        As of December 31, 2016, we employed 1,252 people. Our success depends on the continued service of our key technical and senior management personnel and on our ability to continue to attract, retain and motivate highly skilled analog and mixed-signal engineers. The competition for such personnel is intense. We have never had a work stoppage and none of our U.S. employees are represented by a labor organization. We consider our employee relations to be good.

12

Table of Contents

Environmental Regulation

        Federal, state and local regulations impose various environmental controls on the storage, use, discharge and disposal of certain chemicals and gases used in the semiconductor industry. Our compliance with these laws and regulations has not had a material impact on our financial position or results of operations.

Available Information

        Our website address is www.silabs.com. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available through the investor relations page of our website free of charge as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (SEC). Our website and the information contained therein or connected thereto are not intended to be incorporated into this Annual Report on Form 10-K.

Item 1A.    Risk Factors

Risks Related to our Business

We may not be able to maintain our historical growth and may experience significant period-to-period fluctuations in our revenues and operating results, which may result in volatility in our stock price

        Although we have generally experienced revenue growth in our history, we may not be able to sustain this growth. We may also experience significant period-to-period fluctuations in our revenues and operating results in the future due to a number of factors, and any such variations may cause our stock price to fluctuate. In some future period our revenues or operating results may be below the expectations of public market analysts or investors. If this occurs, our stock price may drop, perhaps significantly.

        A number of factors, in addition to those cited in other risk factors applicable to our business, may contribute to fluctuations in our revenues and operating results, including:

•

The timing and volume of orders received from our customers;



•

The timeliness of our new product introductions and the rate at which our new products may cannibalize our older products;



•

The rate of acceptance of our products by our customers, including the acceptance of new products we may develop for integration in the products manufactured by such customers, which we refer to as "design wins"



•

The time lag and realization rate between "design wins" and production orders;



•

The demand for, and life cycles of, the products incorporating our mixed-signal solutions;



•

The rate of adoption of mixed-signal products in the markets we target;



•

Deferrals or reductions of customer orders in anticipation of new products or product enhancements from us or our competitors or other providers of mixed-signal ICs;



•

Changes in product mix;



•

The average selling prices for our products could drop suddenly due to competitive offerings or competitive predatory pricing;



•

The average selling prices for our products generally decline over time;

13

Table of Contents

•

Changes in market standards;



•

Impairment charges related to inventory, equipment or other long-lived assets;



•

The software used in our products, including software provided by third parties, may not meet the needs of our customers;



•

Significant legal costs to defend our intellectual property rights or respond to claims against us; and



•

The rate at which new markets emerge for products we are currently developing or for which our design expertise can be utilized to develop products for these new markets.

        The markets for consumer electronics, for example, are characterized by rapid fluctuations in demand and seasonality that result in corresponding fluctuations in the demand for our products that are incorporated in such devices. Additionally, the rate of technology acceptance by our customers results in fluctuating demand for our products as customers are reluctant to incorporate a new IC into their products until the new IC has achieved market acceptance. Once a new IC achieves market acceptance, demand for the new IC can quickly accelerate to a point and then level off such that rapid historical growth in sales of a product should not be viewed as indicative of continued future growth. In addition, demand can quickly decline for a product when a new IC product is introduced and receives market acceptance. Due to the various factors mentioned above, the results of any prior quarterly or annual periods should not be relied upon as an indication of our future operating performance.

If we are unable to develop or acquire new and enhanced products that achieve market acceptance in a timely manner, our operating results and competitive position could be harmed

        Our future success will depend on our ability to develop or acquire new products and product enhancements that achieve market acceptance in a timely and cost-effective manner. The development of mixed-signal ICs is highly complex, and we have at times experienced delays in completing the development and introduction of new products and product enhancements. Successful product development and market acceptance of our products depend on a number of factors, including:

•

Requirements of customers;



•

Accurate prediction of market and technical requirements;



•

Timely completion and introduction of new designs;



•

Timely qualification and certification of our products for use in our customers' products;



•

Commercial acceptance and volume production of the products into which our ICs will be incorporated;



•

Availability of foundry, assembly and test capacity;



•

Achievement of high manufacturing yields;



•

Quality, price, performance, power use and size of our products;



•

Availability, quality, price and performance of competing products and technologies;



•

Our customer service, application support capabilities and responsiveness;



•

Successful development of our relationships with existing and potential customers;



•

Technology, industry standards or end-user preferences; and



•

Cooperation of third-party software providers and our semiconductor vendors to support our chips within a system.

14

Table of Contents

        We cannot provide any assurance that products which we recently have developed or may develop in the future will achieve market acceptance. We have introduced to market or are in development of many products. If our products fail to achieve market acceptance, or if we fail to develop new products on a timely basis that achieve market acceptance, our growth prospects, operating results and competitive position could be adversely affected. The growth of the Internet of Things (IoT) market is dependent on the adoption of industry standards to permit devices to connect and communicate with each other. If the industry cannot agree on a common set of standards, then the growth of the IoT market may be slower than expected.

Our research and development efforts are focused on a limited number of new technologies and products, and any delay in the development, or abandonment, of these technologies or products by industry participants, or their failure to achieve market acceptance, could compromise our competitive position

        Our products serve as components and solutions in electronic devices in various markets. As a result, we have devoted and expect to continue to devote a large amount of resources to develop products based on new and emerging technologies and standards that will be commercially introduced in the future. Research and development expense during fiscal 2016 was $199.7 million, or 28.6% of revenues. A number of companies are actively involved in the development of these new technologies and standards. Should any of these companies delay or abandon their efforts to develop commercially available products based on new technologies and standards, our research and development efforts with respect to these technologies and standards likely would have no appreciable value. In addition, if we do not correctly anticipate new technologies and standards, or if the products that we develop based on these new technologies and standards fail to achieve market acceptance, our competitors may be better able to address market demand than we would. Furthermore, if markets for these new technologies and standards develop later than we anticipate, or do not develop at all, demand for our products that are currently in development would suffer, resulting in lower sales of these products than we currently anticipate.

Significant litigation over intellectual property in our industry may cause us to become involved in costly and lengthy litigation which could seriously harm our business

        In recent years, there has been significant litigation in the United States involving patents and other intellectual property rights. From time to time, we receive letters from various industry participants alleging infringement of patents, trademarks or misappropriation of trade secrets or from customers or suppliers requesting indemnification for claims brought against them by third parties. The exploratory nature of these inquiries has become relatively common in the semiconductor industry. We respond when we deem appropriate and as advised by legal counsel. We have been involved in litigation to protect our intellectual property rights in the past and may become involved in such litigation again in the future. We are currently involved in litigation in which we and certain of our customers have been accused of patent infringement related to our television tuner products. In the future, we may become involved in additional litigation to defend allegations of infringement asserted by others, both directly and indirectly as a result of certain industry-standard indemnities we may offer to our customers or suppliers. Legal proceedings could subject us to significant liability for damages or invalidate our proprietary rights. Legal proceedings initiated by us to protect our intellectual property rights could also result in counterclaims or countersuits against us. Any litigation, regardless of its outcome, would likely be time-consuming and expensive to resolve and would divert our management's time and attention. Intellectual property litigation also could force us to take specific actions, including:

•

Cease selling or manufacturing products that use the challenged intellectual property;



•

Obtain from the owner of the infringed intellectual property a right to a license to sell or use the relevant technology, which license may not be available on reasonable terms, or at all;

15

Table of Contents

•

Redesign those products that use infringing intellectual property; or



•

Pursue legal remedies with third parties to enforce our indemnification rights, which may not adequately protect our interests.

Any acquisitions we make could disrupt our business and harm our financial condition

        As part of our growth and product diversification strategy, we continue to evaluate opportunities to acquire other businesses, intellectual property or technologies that would complement our current offerings, expand the breadth of our markets or enhance our technical capabilities. The acquisitions that we have made and may make in the future entail a number of risks that could materially and adversely affect our business and operating results, including:

•

Problems integrating the acquired operations, technologies or products with our existing business and products;



•

Diversion of management's time and attention from our core business;



•

Need for financial resources above our planned investment levels;



•

Difficulties in retaining business relationships with suppliers and customers of the acquired company;



•

Risks associated with entering markets in which we lack prior experience;



•

Risks associated with the transfer of licenses of intellectual property;



•

Increased operating costs due to acquired overhead;



•

Tax issues associated with acquisitions;



•

Acquisition-related disputes, including disputes over earn-outs and escrows;



•

Potential loss of key employees of the acquired company; and



•

Potential impairment of related goodwill and intangible assets.

        Future acquisitions also could cause us to incur debt or contingent liabilities or cause us to issue equity securities that could negatively impact the ownership percentages of existing shareholders.

We may be unable to protect our intellectual property, which would negatively affect our ability to compete

        Our products rely on our proprietary technology, and we expect that future technological advances made by us will be critical to sustain market acceptance of our products. Therefore, we believe that the protection of our intellectual property rights is and will continue to be important to the success of our business. We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We also enter into confidentiality or license agreements with our employees, consultants, intellectual property providers and business partners, and control access to and distribution of our documentation and other proprietary information. Despite these efforts, unauthorized parties may attempt to copy or otherwise obtain and use our proprietary technology. Monitoring unauthorized use of our technology is difficult, and we cannot be certain that the steps we have taken will prevent unauthorized use of our technology, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. We cannot be certain that patents will be issued as a result of our pending applications nor can we be certain that any issued patents would protect or benefit us or give us adequate protection from competing products. For example, issued patents may be circumvented or challenged and declared invalid or unenforceable. We also cannot be certain that others will not develop effective competing technologies on their own.

16

Table of Contents

Failure to manage our distribution channel relationships could impede our future growth

        The future growth of our business will depend in large part on our ability to manage our relationships with current and future distributors and sales representatives, develop additional channels for the distribution and sale of our products and manage these relationships. During fiscal 2016, 68% of our revenue was derived from distributors. As we execute our indirect sales strategy, we must manage the potential conflicts that may arise with our direct sales efforts. For example, conflicts with a distributor may arise when a customer begins purchasing directly from us rather than through the distributor. The inability to successfully execute or manage a multi-channel sales strategy could impede our future growth. In addition, relationships with our distributors often involve the use of price protection and inventory return rights. This often requires a significant amount of sales management's time and system resources to manage properly.

We depend on a limited number of customers for a significant portion of our revenues, and the loss of, or a significant reduction in orders from, any key customer could significantly reduce our revenues

        The loss of any of our key customers, or a significant reduction in sales to any one of them, would significantly reduce our revenues and adversely affect our business. During fiscal 2016, our ten largest customers accounted for 25% of our revenues. Some of the markets for our products are dominated by a small number of potential customers. Therefore, our operating results in the foreseeable future will continue to depend on our ability to sell to these dominant customers, as well as the ability of these customers to sell products that incorporate our IC products. In the future, these customers may decide not to purchase our products at all, purchase fewer products than they did in the past or alter their purchasing patterns, particularly because:

•

We do not have material long-term purchase contracts with our customers;



•

Substantially all of our sales to date have been made on a purchase order basis, which permits our customers to cancel, change or delay product purchase commitments with little or no notice to us and without penalty;



•

Some of our customers may have efforts underway to actively diversify their vendor base which could reduce purchases of our products; and



•

Some of our customers have developed or acquired products that compete directly with products these customers purchase from us, which could affect our customers' purchasing decisions in the future.

        Our customers regularly evaluate alternative sources of supply in order to diversify their supplier base, which increases their negotiating leverage with us and protects their ability to secure these components. We believe that any expansion of our customers' supplier bases could have an adverse effect on the prices we are able to charge and volume of product that we are able to sell to our customers, which would negatively affect our revenues and operating results.

We are subject to increased inventory risks and costs because we build our products based on forecasts provided by customers before receiving purchase orders for the products

        In order to ensure availability of our products for some of our largest customers, we start the manufacturing of our products in advance of receiving purchase orders based on forecasts provided by these customers. However, these forecasts do not represent binding purchase commitments and we do not recognize sales for these products until they are shipped to the customer. As a result, we incur inventory and manufacturing costs in advance of anticipated sales. Because demand for our products may not materialize, manufacturing based on forecasts subjects us to increased risks of high inventory carrying costs, increased obsolescence and increased operating costs. These inventory risks are exacerbated when our customers purchase indirectly through contract manufacturers or hold

17

Table of Contents

component inventory levels greater than their consumption rate because this causes us to have less visibility regarding the accumulated levels of inventory for such customers. A resulting write-off of unusable or excess inventories would adversely affect our operating results.

Our products are complex and may contain errors which could lead to liability, an increase in our costs and/or a reduction in our revenues

        Our products are complex and may contain errors, particularly when first introduced or as new versions are released. Our products are increasingly being designed in more complex processes, include higher levels of software and hardware integration in modules and system-level solutions and/or include elements provided by third parties which further increase the risk of errors. We rely primarily on our in-house testing personnel to design test operations and procedures to detect any errors or vulnerabilities prior to delivery of our products to our customers.

        Should problems occur in the operation or performance of our products, we may experience delays in meeting key introduction dates or scheduled delivery dates to our customers. These errors also could cause us to incur significant re-engineering costs, divert the attention of our engineering personnel from our product development efforts and cause significant customer relations and business reputation problems. Any defects could result in refunds or other liability or require product replacement or recall. Any of the foregoing could impose substantial costs and harm our business.

        Product liability, data breach or cyber liability claims may be asserted with respect to our products. Our products are typically sold at prices that are significantly lower than the cost of the end-products into which they are incorporated. A defect or failure in our product could cause failure in our customer's end-product, so we could face claims for damages that are disproportionately higher than the revenues and profits we receive from the products involved. Furthermore, product liability risks are particularly significant with respect to medical and automotive applications because of the risk of serious harm to users of these products. There can be no assurance that any insurance we maintain will sufficiently protect us from any such claims.

We rely on third parties to manufacture, assemble and test our products and the failure to successfully manage our relationships with our manufacturers and subcontractors would negatively impact our ability to sell our products

        We do not have our own wafer fab manufacturing facilities. Therefore, we rely on third-party vendors to manufacture the products we design. We also currently rely on Asian third-party assembly subcontractors to assemble and package the silicon chips provided by the wafers for use in final products. Additionally, we rely on these offshore subcontractors for a substantial portion of the testing requirements of our products prior to shipping. We expect utilization of third-party subcontractors to continue in the future.

        The cyclical nature of the semiconductor industry drives wide fluctuations in available capacity at third-party vendors. On occasion, we have been unable to adequately respond to unexpected increases in customer demand due to capacity constraints and, therefore, were unable to benefit from this incremental demand. We may be unable to obtain adequate foundry, assembly or test capacity from our third-party subcontractors to meet our customers' delivery requirements even if we adequately forecast customer demand.

        There are significant risks associated with relying on these third-party foundries and subcontractors, including:

•

Failure by us, our customers or their end customers to qualify a selected supplier;



•

Potential insolvency of the third-party subcontractors;

18

Table of Contents

•

Reduced control over delivery schedules and quality;



•

Limited warranties on wafers or products supplied to us;



•

Potential increases in prices or payments in advance for capacity;



•

Increased need for international-based supply, logistics and financial management;



•

Their inability to supply or support new or changing packaging technologies; and



•

Low test yields.

        We typically do not have long-term supply contracts with our third-party vendors which obligate the vendor to perform services and supply products to us for a specific period, in specific quantities, and at specific prices. Our third-party foundry, assembly and test subcontractors typically do not guarantee that adequate capacity will be available to us within the time required to meet demand for our products. In the event that these vendors fail to meet our demand for whatever reason, we expect that it would take up to 12 months to transition performance of these services to new providers. Such a transition may also require qualification of the new providers by our customers or their end customers.

        Most of the silicon wafers for the products that we have sold were manufactured either by Taiwan Semiconductor Manufacturing Co. (TSMC) or TSMC's affiliates or by Semiconductor Manufacturing International Corporation (SMIC). Our customers typically complete their own qualification process. If we fail to properly balance customer demand across the existing semiconductor fabrication facilities that we utilize or are required by our foundry partners to increase, or otherwise change the number of fab lines that we utilize for our production, we might not be able to fulfill demand for our products and may need to divert our engineering resources away from new product development initiatives to support the fab line transition, which would adversely affect our operating results.

Our customers require our products to undergo a lengthy and expensive qualification process without any assurance of product sales

        Prior to purchasing our products, our customers require that our products undergo an extensive qualification process, which involves testing of the products in the customer's system as well as rigorous reliability testing. This qualification process may continue for six months or longer. However, qualification of a product by a customer does not ensure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision to the product or software, changes in the IC's manufacturing process or the selection of a new supplier by us may require a new qualification process, which may result in delays and in us holding excess or obsolete inventory. After our products are qualified, it can take an additional six months or more before the customer commences volume production of components or devices that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, toward qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, such failure or delay would preclude or delay sales of such product to the customer, which may impede our growth and cause our business to suffer.

We are a global company, which subjects us to additional business risks including logistical and financial complexity, political instability and currency fluctuations

        We have established international subsidiaries and have opened offices in international markets to support our activities in Asia, the Americas and Europe. This has included the establishment of a headquarters in Singapore for non-U.S. operations. The percentage of our revenues derived from outside of the United States was 86% during fiscal 2016. We may not be able to maintain or increase

19

Table of Contents

global market demand for our products. Our international operations are subject to a number of risks, including:

•

Complexity and costs of managing international operations and related tax obligations, including our headquarters for non-U.S. operations in Singapore;



•

Protectionist laws and business practices;



•

Difficulties related to the protection of our intellectual property rights in some countries;



•

Multiple, conflicting and changing tax and other laws and regulations that may impact both our international and domestic tax and other liabilities and result in increased complexity and costs;



•

Longer sales cycles;



•

Greater difficulty in accounts receivable collection and longer collection periods;



•

High levels of distributor inventory subject to price protection and rights of return to us;



•

Political and economic instability;



•

Greater difficulty in hiring and retaining qualified personnel; and



•

The need to have business and operations systems that can meet the needs of our international business and operating structure.

        To date, substantially all of our sales to international customers and purchases of components from international suppliers have been denominated in U.S. dollars. As a result, an increase in the value of the U.S. dollar relative to foreign currencies could make our products more expensive for our international customers to purchase, thus rendering our products less competitive. Similarly, a decrease in the value of the U.S. dollar could reduce our buying power with respect to international suppliers.

Our inability to manage growth could materially and adversely affect our business

        Our past growth has placed, and any future growth of our operations will continue to place, a significant strain on our management personnel, systems and resources. We anticipate that we will need to implement a variety of new and upgraded sales, operational and financial enterprise-wide systems, information technology infrastructure, procedures and controls, including the improvement of our accounting and other internal management systems to manage this growth and maintain compliance with regulatory guidelines, including Sarbanes-Oxley Act requirements. To the extent our business grows, our internal management systems and processes will need to improve to ensure that we remain in compliance. We also expect that we will need to continue to expand, train, manage and motivate our workforce. All of these endeavors will require substantial management effort, and we anticipate that we will require additional management personnel and internal processes to manage these efforts and to plan for the succession from time to time of certain persons who have been key management and technical personnel. If we are unable to effectively manage our expanding global operations, including our international headquarters in Singapore, our business could be materially and adversely affected.

Our products incorporate technology licensed from third parties

        We incorporate technology (including software) licensed from third parties in our products. We could be subjected to claims of infringement regardless of our lack of involvement in the development of the licensed technology. Although a third-party licensor is typically obligated to indemnify us if the licensed technology infringes on another party's intellectual property rights, such indemnification is typically limited in amount and may be worthless if the licensor becomes insolvent. See Significant litigation over intellectual property in our industry may cause us to become involved in costly and lengthy litigation which could seriously harm our business. Furthermore, any failure of third-party technology to perform properly would adversely affect sales of our products incorporating such technology.

20

Table of Contents

We are subject to risks relating to product concentration

        We derive a substantial portion of our revenues from a limited number of products, and we expect these products to continue to account for a large percentage of our revenues in the near term. Continued market acceptance of these products, is therefore, critical to our future success. In addition, substantially all of our products that we have sold include technology related to one or more of our issued U.S. patents. If these patents are found to be invalid or unenforceable, our competitors could introduce competitive products that could reduce both the volume and price per unit of our products. Our business, operating results, financial condition and cash flows could therefore be adversely affected by:

•

A decline in demand for any of our more significant products;



•

Failure of our products to achieve continued market acceptance;



•

Competitive products;



•

New technological standards or changes to existing standards that we are unable to address with our products;



•

A failure to release new products or enhanced versions of our existing products on a timely basis; and



•

The failure of our new products to achieve market acceptance.

We are subject to credit risks related to our accounts receivable

        We do not generally obtain letters of credit or other security for payment from customers, distributors or contract manufacturers. Accordingly, we are not protected against accounts receivable default or bankruptcy by these entities. Our ten largest customers or distributors represent a substantial majority of our accounts receivable. If any such customer or distributor, or a material portion of our smaller customers or distributors, were to become insolvent or otherwise not satisfy their obligations to us, we could be materially harmed.

We depend on our key personnel to manage our business effectively in a rapidly changing market, and if we are unable to retain our current personnel and hire additional personnel, our ability to develop and successfully market our products could be harmed

        We believe our future success will depend in large part upon our ability to attract and retain highly skilled managerial, engineering, sales and marketing personnel. We believe that our future success will be dependent on retaining the services of our key personnel, developing their successors and certain internal processes to reduce our reliance on specific individuals, and on properly managing the transition of key roles when they occur. There is currently a shortage of qualified personnel with significant experience in the design, development, manufacturing, marketing and sales of analog and mixed-signal products. In particular, there is a shortage of engineers who are familiar with the intricacies of the design and manufacturability of analog elements, and competition for such personnel is intense. Our key technical personnel represent a significant asset and serve as the primary source for our technological and product innovations. We may not be successful in attracting and retaining sufficient numbers of technical personnel to support our anticipated growth. The loss of any of our key employees or the inability to attract or retain qualified personnel both in the United States and internationally, including engineers, sales, applications and marketing personnel, could delay the development and introduction of, and negatively impact our ability to sell, our products.

21

Table of Contents

Any dispositions could harm our financial condition

        Any disposition of a product line would entail a number of risks that could materially and adversely affect our business and operating results, including:

•

Diversion of management's time and attention from our core business;



•

Difficulties separating the divested business;



•

Risks to relations with customers who previously purchased products from our disposed product line;



•

Reduced leverage with suppliers due to reduced aggregate volume;



•

Risks related to employee relations;



•

Risks associated with the transfer and licensing of intellectual property;



•

Security risks and other liabilities related to the transition services provided in connection with the disposition;



•

Tax issues associated with dispositions; and



•

Disposition-related disputes, including disputes over earn-outs and escrows.

Our stock price may be volatile

        The market price of our common stock has been volatile in the past and may be volatile in the future. The market price of our common stock may be significantly affected by the following factors:

•

Actual or anticipated fluctuations in our operating results;



•

Changes in financial estimates by securities analysts or our failure to perform in line with such estimates;



•

Changes in market valuations of other technology companies, particularly semiconductor companies;



•

Announcements by us or our competitors of significant technical innovations, acquisitions, strategic partnerships, joint ventures or capital commitments;



•

Introduction of technologies or product enhancements that reduce the need for our products;



•

The loss of, or decrease in sales to, one or more key customers;



•

A large sale of stock by a significant shareholder;



•

Dilution from the issuance of our stock in connection with acquisitions;



•

The addition or removal of our stock to or from a stock index fund;



•

Departures of key personnel;



•

The required expensing of stock awards; and



•

The required changes in our reported revenue and revenue recognition accounting policy expected under Accounting Standards Update (ASU) No. 2014-09, Revenue from Contracts with Customers (Topic 606).

        The stock market has experienced extreme volatility that often has been unrelated to the performance of particular companies. These market fluctuations may cause our stock price to fall regardless of our performance.

22

Table of Contents

Most of our current manufacturers, assemblers, test service providers, distributors and customers are concentrated in the same geographic region, which increases the risk that a natural disaster, epidemic, labor strike, war or political unrest could disrupt our operations or sales

        Most of our foundries and several of our assembly and test subcontractors' sites are located in Taiwan and most of our other foundry, assembly and test subcontractors are located in the Pacific Rim region. In addition, many of our customers are located in the Pacific Rim region. The risk of earthquakes in Taiwan and the Pacific Rim region is significant due to the proximity of major earthquake fault lines in the area. Earthquakes, tsunamis, fire, flooding, lack of water or other natural disasters, an epidemic, political unrest, war, labor strikes or work stoppages in countries where our semiconductor manufacturers, assemblers and test subcontractors are located, likely would result in the disruption of our foundry, assembly or test capacity. There can be no assurance that alternate capacity could be obtained on favorable terms, if at all.

        A natural disaster, epidemic, labor strike, war or political unrest where our customers' facilities are located would likely reduce our sales to such customers. North Korea's geopolitical maneuverings have created unrest. Such unrest could create economic uncertainty or instability, could escalate to war or otherwise adversely affect South Korea and our South Korean customers and reduce our sales to such customers, which would materially and adversely affect our operating results. In addition, a significant portion of the assembly and testing of our products occurs in South Korea. Any disruption resulting from these events could also cause significant delays in shipments of our products until we are able to shift our manufacturing, assembling or testing from the affected subcontractor to another third-party vendor.

The semiconductor manufacturing process is highly complex and, from time to time, manufacturing yields may fall below our expectations, which could result in our inability to satisfy demand for our products in a timely manner and may decrease our gross margins due to higher unit costs

        The manufacturing of our products is a highly complex and technologically demanding process. Although we work closely with our foundries and assemblers to minimize the likelihood of reduced manufacturing yields, we have from time to time experienced lower than anticipated manufacturing yields. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials could result in lower than anticipated manufacturing yields or unacceptable performance deficiencies, which could lower our gross margins. If our foundries fail to deliver fabricated silicon wafers of satisfactory quality in a timely manner, we will be unable to meet our customers' demand for our products in a timely manner, which would adversely affect our operating results and damage our customer relationships.

We depend on our customers to support our products, and some of our customers offer competing products

        We rely on our customers to provide hardware, software, intellectual property indemnification and other technical support for the products supplied by our customers. If our customers do not provide the required functionality or if our customers do not provide satisfactory support for their products, the demand for these devices that incorporate our products may diminish or we may otherwise be materially adversely affected. Any reduction in the demand for these devices would significantly reduce our revenues.

        In certain products, some of our customers offer their own competitive products. These customers may find it advantageous to support their own offerings in the marketplace in lieu of promoting our products.

23

Table of Contents

Our debt could adversely affect our operations and financial condition

        We believe we have the ability to service our debt under our credit facilities, but our ability to make the required payments thereunder when due depends upon our future performance, which will be subject to general economic conditions, industry cycles and other factors affecting our operations, including risk factors described under this Item 1A, many of which are beyond our control. Our credit facilities also contain covenants, including financial covenants. If we breach any of the covenants under our credit facilities and do not obtain appropriate waivers, then, subject to any applicable cure periods, our outstanding indebtedness thereunder could be declared immediately due and payable.

We could seek to raise additional debt or equity capital in the future, but additional capital may not be available on terms acceptable to us, or at all

        We believe that our existing cash, cash equivalents, investments and credit under our credit facilities will be sufficient to meet our working capital needs, capital expenditures, investment requirements and commitments for at least the next 12 months. However, our ability to borrow further under the credit facilities is dependent upon our ability to satisfy various conditions, covenants and representations. It is possible that we may need to raise additional funds to finance our activities or to facilitate acquisitions of other businesses, products, intellectual property or technologies. We believe we could raise these funds, if needed, by selling equity or debt securities to the public or to selected investors. In addition, even though we may not need additional funds, we may still elect to sell additional equity or debt securities or obtain credit facilities for other reasons. However, we may not be able to obtain additional funds on favorable terms, or at all. If we decide to raise additional funds by issuing equity or convertible debt securities, the ownership percentages of existing shareholders would be reduced.

We have limited resources compared to some of our current and potential competitors and we may not be able to compete effectively and increase market share

        Some of our current and potential competitors have longer operating histories, significantly greater resources and name recognition and a larger base of customers than we have. As a result, these competitors may have greater credibility with our existing and potential customers. They also may be able to adopt more aggressive pricing policies and devote greater resources to the development, promotion and sale of their products than we can to ours. In addition, some of our current and potential competitors have already established supplier or joint development relationships with the decision makers at our current or potential customers. These competitors may be able to leverage their existing relationships to discourage their customers from purchasing products from us or persuade them to replace our products with their products. Our competitors may also offer bundled solutions offering a more complete product despite the technical merits or advantages of our products. These competitors may elect not to support our products which could complicate our sales efforts. These and other competitive pressures may prevent us from competing successfully against current or future competitors, and may materially harm our business. Competition could decrease our prices, reduce our sales, lower our gross margins and/or decrease our market share.

Provisions in our charter documents and Delaware law could prevent, delay or impede a change in control of us and may reduce the market price of our common stock

        Provisions of our certificate of incorporation and bylaws could have the effect of discouraging, delaying or preventing a merger or acquisition that a stockholder may consider favorable. For example, our certificate of incorporation and bylaws provide for:

•

The division of our Board of Directors into three classes to be elected on a staggered basis, one class each year;

24

Table of Contents

•

The ability of our Board of Directors to issue shares of our preferred stock in one or more series without further authorization of our stockholders;



•

A prohibition on stockholder action by written consent;



•

Elimination of the right of stockholders to call a special meeting of stockholders;



•

A requirement that stockholders provide advance notice of any stockholder nominations of directors or any proposal of new business to be considered at any meeting of stockholders; and



•

A requirement that a supermajority vote be obtained to amend or repeal certain provisions of our certificate of incorporation.

        We also are subject to the anti-takeover laws of Delaware which may discourage, delay or prevent someone from acquiring or merging with us, which may adversely affect the market price of our common stock.

Risks related to our industry

We are subject to the cyclical nature of the semiconductor industry, which has been subject to significant fluctuations

        The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. The industry has experienced significant fluctuations, often connected with, or in anticipation of, maturing product cycles and new product introductions of both semiconductor companies' and their customers' products and fluctuations in general economic conditions. Deteriorating general worldwide economic conditions, including reduced economic activity, concerns about credit and inflation, increased energy costs, decreased consumer confidence, reduced corporate profits, decreased spending and similar adverse business conditions, would make it very difficult for our customers, our vendors, and us to accurately forecast and plan future business activities and could cause U.S. and foreign businesses to slow spending on our products. We cannot predict the timing, strength, or duration of any economic slowdown or economic recovery. If the economy or markets in which we operate deteriorate, our business, financial condition, and results of operations would likely be materially and adversely affected.

        Downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. In the recent past, we believe the semiconductor industry suffered a downturn due in large part to adverse conditions in the global credit and financial markets, including diminished liquidity and credit availability, declines in consumer confidence, declines in economic growth, increased unemployment rates and general uncertainty regarding the economy. Such downturns may have a material adverse effect on our business and operating results.

        Upturns have been characterized by increased product demand and production capacity constraints created by increased competition for access to third-party foundry, assembly and test capacity. We are dependent on the availability of such capacity to manufacture, assemble and test our products. None of our third-party foundry, assembly or test subcontractors have provided assurances that adequate capacity will be available to us.

The average selling prices of our products could decrease rapidly which may negatively impact our revenues and gross margins

        We may experience substantial period-to-period fluctuations in future operating results due to the erosion of our average selling prices. We have reduced the average unit price of our products in anticipation of or in response to competitive pricing pressures, new product introductions by us or our

25

Table of Contents

competitors and other factors. If we are unable to offset any such reductions in our average selling prices by increasing our sales volumes, increasing our sales content per application or reducing production costs, our gross margins and revenues will suffer. To maintain our gross margin percentage, we will need to develop and introduce new products and product enhancements on a timely basis and continually reduce our costs. Our failure to do so could cause our revenues and gross margin percentage to decline.

Competition within the numerous markets we target may reduce sales of our products and reduce our market share

        The markets for semiconductors in general, and for mixed-signal products in particular, are intensely competitive. We expect that the market for our products will continually evolve and will be subject to rapid technological change. In addition, as we target and supply products to numerous markets and applications, we face competition from a relatively large number of competitors. We compete with Analog Devices, Broadcom, Conexant, Cypress, IDT, Marvell Technology Group, Maxim Integrated Products, MaxLinear, Microchip, Microsemi, Nordic Semiconductor, NXP Semiconductors, Qualcomm, Renesas, STMicroelectronics, Texas Instruments, Vectron International and others. We expect to face competition in the future from our current competitors, other manufacturers and designers of semiconductors, and start-up semiconductor design companies. As the markets for communications products grow, we also may face competition from traditional communications device companies. These companies may enter the mixed-signal semiconductor market by introducing their own products or by entering into strategic relationships with or acquiring other existing providers of semiconductor products. In addition, large companies may restructure their operations to create separate companies or may acquire new businesses that are focused on providing the types of products we produce or acquire our customers.

We may be the victim of cyber-attacks against our products and our networks, which could lead to liability and damage our reputation and financial results

        Many of our products focus on wireless connectivity and the IoT market and such connectivity may make these products particularly susceptible to cyber-attacks. We routinely face attacks attempting to breach our security protocols, gain access to or disrupt our computerized systems, or steal proprietary company, customer, partner or employee information. These attacks are sometimes successful. We may be subject to security breaches, employee error, theft, malfeasance, phishing schemes, ransomware, faulty password or data security management, or other irregularities. The theft, loss or misuse of personal or business data collected, used, stored or transferred by us to run our business could result in increased security costs or costs related to defending legal claims. Industrial espionage, theft or loss of our intellectual property data could lead to counterfeit products or harm the competitive position of our products and services. Costs to comply with and implement privacy-related and data protection measures could be significant. Federal, state or international privacy-related or data protection laws and regulations could result in proceedings against us by governmental entities or others. Attempted or successful attacks against our products and services could damage our reputation with customers or users and reduce demand for our products and services.

We may be subject to information technology failures that could damage our reputation, business operations and financial condition

        We rely on information technology for the effective operation of our business. Our systems are subject to damage or interruption from a number of potential sources, including natural disasters, accidents, power disruptions, telecommunications failures, acts of terrorism or war, computer viruses, theft, physical or electronic break-ins, cyber-attacks, sabotage, vandalism, or similar events or disruptions. Our security measures may not detect or prevent such security breaches. Any such

26

Table of Contents

compromise of our information security could result in the theft or unauthorized publication or use of our confidential business or proprietary information, result in the unauthorized release of customer, supplier or employee data, result in a violation of privacy or other laws, expose us to a risk of litigation or damage our reputation. In addition, our inability to use or access information systems at critical points in time could unfavorably impact the timely and efficient operation of our business, which could negatively affect our business and operating results.

        Third parties with which we conduct business, such as foundries, assembly and test contractors, distributors and customers, have access to certain portions of our sensitive data. In the event that these third parties do not properly safeguard our data that they hold, security breaches could result and negatively impact our reputation, business operations and financial results.

Our products must conform to industry standards and technology in order to be accepted by end users in our markets

        Generally, our products comprise only a part of a device. All components of such devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in affecting industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or end users. If larger companies do not support the same industry standards that we do, or if competing standards emerge, market acceptance of our products could be adversely affected which would harm our business.

        Products for certain applications are based on industry standards that are continually evolving. Our ability to compete in the future will depend on our ability to identify and ensure compliance with these evolving industry standards. The emergence of new industry standards could render our products incompatible with products developed by other suppliers. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins.

        Our pursuit of necessary technological advances may require substantial time and expense. We may not be successful in developing or using new technologies or in developing new products or product enhancements that achieve market acceptance. If our products fail to achieve market acceptance, our growth prospects, operating results and competitive position could be adversely affected.

Customer demands and new regulations related to conflict-free minerals may adversely affect us

        The Dodd-Frank Wall Street Reform and Consumer Protection Act imposes new disclosure requirements regarding the use of "conflict" minerals mined from the Democratic Republic of Congo and adjoining countries in products, whether or not these products are manufactured by third parties. These new requirements could affect the pricing, sourcing and availability of minerals used in the manufacture of semiconductor devices (including our products). There will be additional costs associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex and we may be unable to verify the origins for all metals used in our products. We may also encounter challenges with our customers and stockholders if we are unable to certify that our products are conflict free.

Item 1B.    Unresolved Staff Comments

        None.

27

Table of Contents

Item 2.    Properties

        Our corporate headquarters, housing engineering, sales and marketing, administration and test operations, is located in Austin, Texas. Our headquarters facilities consist of two buildings, which we own, that are located on land which we have leased through 2099. The buildings contain approximately 441,000 square feet of floor space, of which approximately 130,000 square feet were leased to other tenants. In addition to these properties, we lease smaller facilities in various locations in the United States, Brazil, Canada, China, Finland, France, Germany, Hungary, India, Italy, Japan, Norway, Singapore, South Korea, Taiwan and the United Kingdom for engineering, sales and marketing, administrative and manufacturing support activities. We believe that these facilities are suitable and adequate to meet our current operating needs.

Item 3.    Legal Proceedings

Patent Litigation

        On January 21, 2014, Cresta Technology Corporation ("Cresta Technology"), a Delaware corporation, filed a lawsuit against us, Samsung Electronics Co., Ltd., Samsung Electronics America, Inc., LG Electronics Inc. and LG Electronics U.S.A., Inc. in the United States District Court in the District of Delaware, alleging infringement of three United States Patents (the "Cresta Patents"). The Delaware District Court action has been stayed.

        On January 28, 2014, Cresta Technology also filed a complaint with the United States International Trade Commission ("ITC") alleging infringement of the same patents. On September 29, 2015, the ITC issued its Final Determination, finding that all the patent claims asserted against our products were either invalid or not infringed and that Cresta Technology failed to establish the ITC's domestic industry requirement. The ITC found no violation by us and terminated the investigation. On November 30, 2015, Cresta Technology filed an appeal of the ITC decision to the Federal Circuit. On March 8, 2016, pursuant to a stipulated dismissal, the Federal Circuit dismissed Cresta Technology's appeal in its entirety.

        In a parallel process, we challenged the validity of the claims of the Cresta Patents asserted in the ITC investigation through a series of Inter-Partes Review (IPR) proceedings at the Patent Trial and Appeal Board (PTAB) of the United States Patent and Trademark Office (USPTO). On October 21, 2015, the USPTO issued final written decisions on a first set of reviewed claims finding all of the reviewed claims invalid. On December 18, 2015, Cresta Technology appealed those adverse decisions to the United States Court of Appeals for the Federal Circuit as to this first USPTO determination. The Federal Circuit summarily affirmed the USPTO's first determination on November 8, 2016 and the mandate issued on December 16, 2016, rendering the USPTO's determination final.

        The USPTO instituted a second set of IPR proceedings against a second set of the remaining claims. On August 11, 2016, the PTAB issued its final written decisions in these proceedings and found all of these remaining claims unpatentable. On October 13, 2016, the patent owner, now known as CF Crespe LLC, filed a notice of appeal with the Federal Circuit seeking to overturn the USPTO's final written decision as to a subset of the claims found unpatentable in this second set of IPR proceedings. That appeal is currently in briefing. No hearing date has been set.

        On March 18, 2016, Cresta Technology filed for chapter 7 bankruptcy in the United States Bankruptcy Court for the Northern District of California.

        On May 13, 2016, the Bankruptcy Court approved an agreement for DBD Credit Funding LLC ("DBD") to buy Cresta Technology's entire IP portfolio and certain related litigation. Following that sale, DBD (through an apparent assignee, CF Crespe LLC) has substituted in the Delaware District Court action, the appeal proceedings at the U.S. Court of Appeals for the Federal Circuit for the first

28

Table of Contents

set of IPR proceedings and the USPTO PTAB proceedings for the second set of IPRs replacing Cresta Technology.

        On July 16, 2014, we filed a lawsuit against Cresta Technology in the United States District Court in the Northern District of California alleging infringement of six United States Patents. We are seeking a permanent injunction and an award of damages and attorney fees. As a result of the chapter 7 bankruptcy filing by Cresta Technology, these proceedings were stayed. However, as a result of the May 13, 2016 sale order by the Bankruptcy Court, DBD and CF Crespe LLC were ordered to substitute in as Defendant for Cresta Technology. DBD and CF Crespe LLC have appealed the Bankruptcy Court's order in that regard. Subject to that appeal, the Company's patent infringement trial against DBD and CF Crespe LLC is set to begin October 2, 2017.

        As is customary in the semiconductor industry, we provide indemnification protection to our customers for intellectual property claims related to our products. We have not accrued any material liability on our Consolidated Balance Sheet related to such indemnification obligations in connection with the Cresta Technology litigation.

        We intend to continue to vigorously defend against Cresta Technology's (now DBD and CF Crespe LLC's) allegations and to continue to pursue our claims against Cresta and their patents. At this time, we cannot predict the outcome of these matters or the resulting financial impact to us, if any.

Other

        We are involved in various other legal proceedings that have arisen in the normal course of business. While the ultimate results of these matters cannot be predicted with certainty, we do not expect them to have a material adverse effect on our Consolidated Financial Statements.

Item 4.    Mine Safety Disclosures

        Not applicable.

29

Table of Contents

Part II

Item 5.    Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information and Holders

        Our registration statement (Registration No. 333-94853) under the Securities Act of 1933, as amended, relating to our initial public offering of our common stock became effective on March 23, 2000. Our common stock is quoted on the NASDAQ National Market (NASDAQ) under the symbol "SLAB". The table below shows the high and low per-share sales prices of our common stock for the periods indicated, as reported by NASDAQ. As of January 23, 2017, there were 85 holders of record of our common stock.

Dividend Policy

        We have never declared or paid any cash dividends on our common stock and we do not intend to pay cash dividends in the foreseeable future. We currently expect to retain any future earnings to fund the operation and expansion of our business.

30

Table of Contents

Stock Performance Graph

        The graph depicted below shows a comparison of cumulative total stockholder returns for an investment in Silicon Laboratories Inc. common stock, the NASDAQ Composite Index and the PHLX Semiconductor Index.

Issuer Purchases of Equity Securities

        The following table summarizes repurchases of our common stock during the three months ended December 31, 2016 (in thousands, except per share amounts):

31

Table of Contents

        In August 2015, the Board of Directors authorized a program to repurchase up to $100 million of our common stock through December 2016. In January 2017, the Board of Directors authorized a program to repurchase up to $100 million of our common stock through December 2017. The programs allow for repurchases to be made in the open market or in private transactions, including structured or accelerated transactions, subject to applicable legal requirements and market conditions.

Item 6.    Selected Financial Data

        Please read this selected consolidated financial data in conjunction with "Management's Discussion and Analysis of Financial Condition and Results of Operations," our Consolidated Financial Statements and the notes to those statements included in this Form 10-K.

32

Table of Contents

Item 7.    Management's Discussion and Analysis of Financial Condition and Results of Operations

        The following discussion and analysis of financial condition and results of operations should be read in conjunction with the Consolidated Financial Statements and related notes thereto included elsewhere in this report. This discussion contains forward-looking statements. Please see the "Cautionary Statement" and "Risk Factors" above for discussions of the uncertainties, risks and assumptions associated with these statements. Our fiscal year-end financial reporting periods are a 52- or 53-week year ending on the Saturday closest to December 31. Fiscal 2016 and 2015 were 52-week years and ended on December 31, 2016 and January 2, 2016, respectively. Fiscal 2014 was a 53-week year with the extra week occurring in the fourth quarter of the year and ended on January 3, 2015.

Overview

        We are a provider of silicon, software and solutions for the Internet of Things (IoT), Internet infrastructure, industrial, consumer and automotive markets. We solve some of the electronics industry's toughest problems, providing customers with significant advantages in performance, energy savings, connectivity and design simplicity. Mixed-signal integrated circuits (ICs) are electronic components that convert real-world analog signals, such as sound and radio waves, into digital signals that electronic products can process. Therefore, mixed-signal ICs are critical components in products addressing a variety of markets, including industrial, communications, consumer and automotive.

        As a fabless semiconductor company, we rely on third-party semiconductor fabricators in Asia, and to a lesser extent the United States and Europe, to manufacture the silicon wafers that reflect our IC designs. Each wafer contains numerous die, which are cut from the wafer to create a chip for an IC. We rely on third parties in Asia to assemble, package, and, in most cases, test these devices and ship these units to our customers. Testing performed by such third parties facilitates faster delivery of products to our customers (particularly those located in Asia), shorter production cycle times, lower inventory requirements, lower costs and increased flexibility of test capacity.

        Our expertise in analog-intensive, high-performance, mixed-signal ICs and software enables us to develop highly differentiated solutions that address multiple markets. We group our products into the following categories:

•

Internet of Things products, which include our microcontroller (MCU), wireless, sensor and analog products;



•

Broadcast products, which include our broadcast consumer and automotive products;



•

Infrastructure products, which include our timing products (clocks and oscillators), and isolation devices; and



•

Access products, which include our Voice over IP (VoIP) products, embedded modems and our Power over Ethernet (PoE) devices.

Current Period Highlights

        Revenues increased $52.8 million in fiscal 2016 compared to fiscal 2015, primarily due to increased revenues from our IoT and Infrastructure products offset by decreases in revenues from our Access and Broadcast products. Infrastructure revenues in fiscal 2016 included $5.0 million from the sale of patents. Gross margin increased $40.7 million during the same period due primarily to increased product sales. Operating expenses increased $6.7 million in fiscal 2016 compared to fiscal 2015 due primarily to increased personnel-related expenses and new product introduction costs, offset by adjustments to the fair value of acquisition-related contingent consideration and decreased acquisition-related costs and legal fees.

33

Table of Contents

        We ended fiscal 2016 with $295.1 million in cash, cash equivalents and short-term investments. Net cash provided by operating activities was $128.9 million during fiscal 2016. Accounts receivable increased to $74.4 million at December 31, 2016 compared to January 2, 2016, representing 37 days sales outstanding (DSO). Inventory increased to $59.6 million at December 31, 2016 compared to January 2, 2016, representing 73 days of inventory (DOI). In fiscal 2016, we repurchased 0.9 million shares of our common stock for $40.5 million. In fiscal 2016, we settled the remaining amount of the contingent consideration to be paid in connection with the Energy Micro acquisition. The settlement amount was $16.0 million.

        Through acquisitions and internal development efforts, we have continued to diversify our product portfolio and introduce new products and solutions with added functionality and further integration. In fiscal 2016, we acquired Micrium, LLC. Micrium is a supplier of real-time operating system (RTOS) software for the IoT. See Note 8, Acquisitions, to the Consolidated Financial Statements for additional information.

        In fiscal 2016, we introduced two new wireless occupancy sensor and smart outlet reference designs for the home automation market; new audio software products for the automotive radio market; a Bluetooth software solution that enables developers to efficiently create Apple® HomeKit™-enabled accessories; a mesh networking stack conforming to the Thread 1.1 specification; a small-footprint Bluetooth low energy system-in-package (SiP) module with a built-in chip antenna; a complete sensor-to-cloud Thunderboard kit that simplifies development of cloud-connected devices for the IoT; Wireless Gecko modules focused on mesh networking applications; a major update to our Simplicity Studio software development tools for IoT connected device applications; a CMOS-based family of isolated field effect transistor (FET) drivers; isolated gate drivers designed to protect power inverter and motor drive applications; high-speed, multi-channel programmable logic controller (PLC) isolators; a small, low-power USBXpress™ bridge device; multiband Wireless Gecko system-on-chip (SoC) devices enabling both 2.4 GHz and sub-GHz multiprotocol connectivity for the IoT market; a comprehensive reference design for cables and adapters based on the USB Type-C™ specification; jitter-attenuating clocks that simplify 100G/400G coherent optical line card and module design; a fully integrated, pre-certified Bluetooth module for low-energy applications; a family of isolated gate drivers for high-speed power supply designs; a plug-and-play Wi-Fi module solution for IoT applications; the scalable Blue Gecko wireless SoC family for the Bluetooth low-energy market; the Wireless Gecko portfolio of multiprotocol SoC devices for IoT applications; next-generation optical sensors that enable enhanced measurement of ultraviolet (UV) radiation and gesture recognition; and an optical heart rate sensing solution for wrist-based heart rate monitoring (HRM) applications. We plan to continue to introduce products that increase the content we provide for existing applications, thereby enabling us to serve markets we do not currently address and expand our total available market opportunity.

        During fiscal 2016 and 2015, we had no end customer that represented more than 10% of our revenues. During fiscal 2014, we had one end customer, Samsung, whose purchases across a variety of product areas represented 12% of our revenues. In addition to direct sales to customers, some of our end customers purchase products indirectly from us through distributors and contract manufacturers. An end customer purchasing through a contract manufacturer typically instructs such contract manufacturer to obtain our products and incorporate such products with other components for sale by such contract manufacturer to the end customer. Although we actually sell the products to, and are paid by, the distributors and contract manufacturers, we refer to such end customer as our customer. Three of our distributors who sell to our customers, Edom Technology, Avnet and Arrow Electronics, each represented 17%, 13% and 11% of our revenues during fiscal 2016. Edom and Avnet represented 20% and 12% of our revenues during fiscal 2015, and 20% and 12% of our revenues during fiscal 2014, respectively. There were no other distributors or contract manufacturers that accounted for more than 10% of our revenues in fiscal 2016, 2015 or 2014.

34

Table of Contents

        The percentage of our revenues derived from outside of the United States was 86% in fiscal 2016, 85% in fiscal 2015 and 86% in fiscal 2014. Substantially all of our revenues to date have been denominated in U.S. dollars. We believe that a majority of our revenues will continue to be derived from customers outside of the United States.

        The sales cycle for our ICs can be as long as 12 months or more. An additional three to six months or more are usually required before a customer ships a significant volume of devices that incorporate our ICs. Due to this lengthy sales cycle, we typically experience a significant delay between incurring research and development and selling, general and administrative expenses, and the corresponding sales. Consequently, if sales in any quarter do not occur when expected, expenses and inventory levels could be disproportionately high, and our operating results for that quarter and, potentially, future quarters would be adversely affected. Moreover, the amount of time between initial research and development and commercialization of a product, if ever, can be substantially longer than the sales cycle for the product. Accordingly, if we incur substantial research and development costs without developing a commercially successful product, our operating results, as well as our growth prospects, could be adversely affected.

        Because many of our ICs are designed for use in consumer products such as televisions, set-top boxes, radios and wearables, we expect that the demand for our products will be typically subject to some degree of seasonal demand. However, rapid changes in our markets and across our product areas make it difficult for us to accurately estimate the impact of seasonal factors on our business.

Results of Operations

        The following describes the line items set forth in our Consolidated Statements of Income:

        Revenues.    Revenues are generated predominately by sales of our products. We recognize revenue on sales when all of the following criteria are met: 1) there is persuasive evidence that an arrangement exists, 2) delivery of goods has occurred, 3) the sales price is fixed or determinable, and 4) collectibility is reasonably assured. Generally, we recognize revenue from product sales to direct customers and contract manufacturers upon shipment. Certain of our sales are made to distributors under agreements allowing certain rights of return and price protection on products unsold by distributors. Accordingly, we defer the revenue and cost of revenue on such sales until the distributors sell the product to the end customer. A small portion of our revenues is derived from the sale of patents. The above revenue recognition criteria for patent sales are generally met upon the execution of the patent sale agreement. Our products typically carry a one-year replacement warranty. Replacements have been insignificant to date.

        Our revenues are subject to variation from period to period due to the volume of shipments made within a period, the mix of products we sell and the prices we charge for our products. The vast majority of our revenues were negotiated at prices that reflect a discount from the list prices for our products. These discounts are made for a variety of reasons, including: 1) to establish a relationship with a new customer, 2) as an incentive for customers to purchase products in larger volumes, 3) to provide profit margin to our distributors who resell our products or 4) in response to competition. In addition, as a product matures, we expect that the average selling price for such product will decline due to the greater availability of competing products. Our ability to increase revenues in the future is dependent on increased demand for our established products and our ability to ship larger volumes of those products in response to such demand, as well as our ability to develop or acquire new products and subsequently achieve customer acceptance of newly introduced products.

        Cost of Revenues.    Cost of revenues includes the cost of purchasing finished silicon wafers processed by independent foundries; costs associated with assembly, test and shipping of those products; costs of personnel and equipment associated with manufacturing support, logistics and quality assurance; costs of software royalties, other intellectual property license costs and certain acquired

35

Table of Contents

intangible assets; and an allocated portion of our occupancy costs. Our gross margin as a percentage of revenue fluctuates depending on product mix, manufacturing yields, inventory valuation adjustments, average selling prices and other factors.

        Research and Development.    Research and development expense consists primarily of personnel-related expenses, including stock-based compensation, as well as new product masks, external consulting and services costs, equipment tooling, equipment depreciation, amortization of intangible assets, and an allocated portion of our occupancy costs. Research and development activities include the design of new products, refinement of existing products and design of test methodologies to ensure compliance with required specifications.

        Selling, General and Administrative.    Selling, general and administrative expense consists primarily of personnel-related expenses, including stock-based compensation, as well as an allocated portion of our occupancy costs, sales commissions to independent sales representatives, applications engineering support, professional fees, legal fees and promotional and marketing expenses.

        Interest Income.    Interest income reflects interest earned on our cash, cash equivalents and investment balances.

        Interest Expense.    Interest expense consists of interest on our short and long-term obligations, including our credit facilities.

        Other, Net.    Other, net consists primarily of foreign currency remeasurement adjustments as well as other non-operating income and expenses.

        Provision for Income Taxes.    Provision for income taxes includes both domestic and foreign income taxes at the applicable tax rates adjusted for non-deductible expenses, research and development tax credits and other permanent differences.

        The following table sets forth our Consolidated Statements of Income data as a percentage of revenues for the periods indicated:

36

Table of Contents

Comparison of Fiscal 2016 to Fiscal 2015

Revenues

        The change in revenues in fiscal 2016 was due primarily to:

•

Increased revenues of $52.3 million for our Internet of Things products, due primarily to increases in the market and the addition of revenues from acquisitions.



•

Decreased revenues of $4.1 million for Broadcast products, due primarily to decreases in the market for our consumer products.



•

Increased revenues of $25.7 million for our Infrastructure products, due primarily to increased demand for our products and the sale of patents for $5.0 million.



•

Decreased revenues of $21.1 million for our Access products, due primarily to decreased demand for our products and decreases in the market for such products.

        Unit volumes of our products increased by 14.6% and average selling prices decreased by 6.2% compared to fiscal 2015. The average selling prices of our products may fluctuate significantly from period to period. In general, as our products become more mature, we expect to experience decreases in average selling prices. We anticipate that newly announced, higher priced, next generation products and product derivatives will offset some of these decreases.

Gross Margin

        The increased dollar amount of gross margin in fiscal 2016 was due to increases in gross margin of $27.9 million for our Internet of Things products and $21.7 million for our Infrastructure products, offset by decreases in gross margin of $7.1 million for our Access products and $1.8 million for our Broadcast products. Gross margin in fiscal 2016 included $5.0 million from the sale of patents, which had no associated cost of revenues. Gross margin in fiscal 2015 included $2.6 million in acquisition-related charges for the fair value write-up associated with inventory acquired from Bluegiga and Telegesis.

        We may experience declines in the average selling prices of certain of our products. This creates downward pressure on gross margin as a percentage of revenues and may be offset to the extent we are able to: 1) introduce higher margin new products and gain market share with our products; 2) reduce costs of existing products through improved design; 3) achieve lower production costs from our wafer suppliers and third-party assembly and test subcontractors; 4) achieve lower production costs per unit as a result of improved yields throughout the manufacturing process; or 5) reduce logistics costs.

37

Table of Contents

Research and Development

        The increase in research and development expense in fiscal 2016 was primarily due to increases of (a) $5.9 million for personnel-related expenses, including costs associated with increased headcount, and (b) $4.4 million for new product introduction costs. We expect that research and development expense will increase in absolute dollars in the first quarter of 2017.

Selling, General and Administrative

        The decrease in selling, general and administrative expense in fiscal 2016 was primarily due to decreases of (a) $2.1 million for adjustments to the fair value of acquisition-related contingent consideration, (b) $1.3 million for personnel-related expenses, (c) $1.0 million for acquisition-related costs, and (d) $1.0 million for legal fees, primarily related to litigation. We expect that selling, general and administrative expense will remain relatively stable in absolute dollars in the first quarter of 2017.

Interest Income

        Interest income in fiscal 2016 was $1.3 million compared to $0.7 million in fiscal 2015.

Interest Expense

        Interest expense in fiscal 2016 was $2.6 million compared $2.8 million in fiscal 2015.

Other, Net

        Other, net in fiscal 2016 was $(0.5) million compared to $0.1 million in fiscal 2015.

Provision for Income Taxes

        The effective tax rate for fiscal 2016 increased from fiscal 2015 primarily due to fiscal 2015 including a net benefit resulting from a change in the tax accounting treatment of stock-based compensation in a cost-sharing arrangement following a U.S. Tax Court case (Altera). The increase in the effective tax rate was partially offset by a reduction in the prior period valuation allowance. See Note 16, Income Taxes, to the Consolidated Financial Statements for additional information.

        The effective tax rates for each of the periods presented differ from the federal statutory rate of 35% due to the amount of income earned in foreign jurisdictions where the tax rate may be lower than the federal statutory rate and other permanent items including nondeductible compensation expenses and research and development tax credits.

38

Table of Contents

Comparison of Fiscal 2015 to Fiscal 2014

Revenues

        The change in revenues in fiscal 2015 was due primarily to:

•

Increased revenues of $53.3 million for our Internet of Things products, due primarily to market share gains for our products, increases in the market and the addition of revenues from acquisitions.



•

Decreased revenues of $42.5 million for Broadcast products, due primarily to decreases in our market share and the market for our consumer products and the sale of patents for $7.1 million in the fiscal 2014. The decrease in Broadcast revenues was offset by increased revenues for our automotive products due to increases in market share.



•

Increased revenues of $13.9 million for our Infrastructure products, due primarily to market share gains.



•

Decreased revenues of $0.6 million for our Access products.

        Unit volumes of our products increased by 3.4% and average selling prices increased by 1.7% compared to fiscal 2014.

Gross Margin

        The increased dollar amount of gross margin in fiscal 2015 was due to increases in gross margin of $18.8 million for our Internet of Things products, $8.1 million for our Infrastructure products and $0.6 million for our Access products, offset by a decrease in gross margin of $25.3 million for our Broadcast products. Gross margin in fiscal 2015 included $2.6 million in acquisition-related charges for the fair value write-up associated with inventory acquired from Bluegiga and Telegesis. Gross margin in fiscal 2014 included $7.1 million from the sale of patents, which had no associated cost of revenues.

Research and Development

        The increase in research and development expense in fiscal 2015 was primarily due to increases of (a) $9.7 million for personnel-related expenses, including costs associated with increased headcount, and (b) $6.7 million for the amortization of intangible assets.

39

Table of Contents

Selling, General and Administrative

        The increase in selling, general and administrative expense in fiscal 2015 was primarily due to increases of (a) $10.8 million for personnel-related expenses, including costs associated with increased headcount, (b) $1.9 million for the amortization of intangible assets, (c) $1.6 million for acquisition-related costs, and (d) $1.0 million for product marketing costs. The increase in selling, general and administrative expense was offset in part by decreases of (a) $6.3 million for legal fees, primarily related to litigation, and (b) $5.2 million for adjustments to the fair value of acquisition-related contingent consideration.

Interest Income

        Interest income in fiscal 2015 was $0.7 million compared to $1.0 million in fiscal 2014.

Interest Expense

        Interest expense in fiscal 2015 was $2.8 million compared $3.2 million in fiscal 2014.

Other, Net

        Other, net in fiscal 2015 was $0.1 million compared to $(0.2) million in fiscal 2014.

Provision for Income Taxes

        The effective tax rate for fiscal 2015 decreased from fiscal 2014, primarily due to the completion of payments related to a prior year intercompany licensing arrangement resulting in an increase to the foreign tax rate benefit as well as the recognition of a net benefit resulting from a change in the tax accounting treatment of stock-based compensation in a cost-sharing arrangement following a U.S. Tax Court case (Altera). See Note 16, Income Taxes, to the Consolidated Financial Statements for additional information.

        The decrease in the effective tax rate from the completion of payments related to a prior year intercompany licensing arrangement and the recognition of a net benefit from the Altera case, was partially offset by an increase in the prior year valuation allowance related to lower expectations of profitability in jurisdictions where tax attributes exist.

        The effective tax rates for each of the periods presented differ from the federal statutory rate of 35% due to the amount of income earned in foreign jurisdictions where the tax rate may be lower than the federal statutory rate and other permanent items including nondeductible compensation expenses and research and development tax credits.

Business Outlook

        We expect revenues in the first quarter of fiscal 2017 to be in the range of $174 to $179 million. Furthermore, we expect our diluted earnings per share to be in the range of $0.21 to $0.27.

40

Table of Contents

Liquidity and Capital Resources

        Our principal sources of liquidity as of December 31, 2016 consisted of $295.1 million in cash, cash equivalents and short-term investments, of which approximately $193.8 million was held by our U.S. entities. The remaining balance was held by our foreign subsidiaries. Our cash equivalents and short-term investments consisted of municipal bonds, money market funds, corporate bonds, variable-rate demand notes, U.S. government bonds, asset-back securities, certificates of deposit, commercial paper and international government bonds. Our long-term investments consisted of auction-rate securities. As of December 31, 2016, we held $6.0 million par value auction-rate securities, all of which have experienced failed auctions because sell orders exceeded buy orders. See Note 4, Fair Value of Financial Instruments, to the Consolidated Financial Statements for additional information.

Operating Activities

        Net cash provided by operating activities was $128.9 million during fiscal 2016, compared to net cash provided of $105.4 million during fiscal 2015. Operating cash flows during fiscal 2016 reflect our net income of $61.5 million, adjustments of $74.8 million for depreciation, amortization, stock-based compensation and deferred income taxes, and a net cash outflow of $7.4 million due to changes in our operating assets and liabilities.

        Net cash provided by operating activities was $105.4 million during fiscal 2015, compared to net cash provided of $137.4 million during fiscal 2014. Operating cash flows during fiscal 2015 reflect our net income of $29.6 million, adjustments of $80.2 million for depreciation, amortization, stock-based compensation and deferred income taxes, and a net cash outflow of $4.4 million due to changes in our operating assets and liabilities.

        Accounts receivable increased to $74.4 million at December 31, 2016 from $73.6 million at January 2, 2016. The increase in accounts receivable resulted primarily from normal variations in the timing of collections and billings. Our average DSO was 37 days at December 31, 2016 and 41 days at January 2, 2016.

        Inventory increased to $59.6 million at December 31, 2016 from $53.9 million at January 2, 2016. Our inventory level is primarily impacted by our need to make purchase commitments to support forecasted demand and variations between forecasted and actual demand. Our DOI was 73 days at December 31, 2016 and January 2, 2016.

Investing Activities

        Net cash used in investing activities was $49.6 million during fiscal 2016, compared to net cash used of $49.3 million during fiscal 2015. The increase in cash outflows was principally due to an increase of $87.8 million in net purchases of marketable securities and an increase of $2.4 million for the purchase of other assets, offset by a decrease of $89.6 million in net payments for the acquisition of businesses. See Note 8, Acquisitions, to the Consolidated Financial Statements for additional information.

        Net cash used in investing activities was $49.3 million during fiscal 2015, compared to net cash used of $26.3 million during fiscal 2014. The increase in cash outflows was principally due to $96.1 million in net payments for the acquisition of businesses, including $76.1 million for the purchase of Bluegiga and Telegesis and $20.0 million for consideration previously withheld in connection with our purchase of Energy Micro, offset by an increase of $74.0 million from net proceeds from the sales and maturities of marketable securities.

        We anticipate capital expenditures of approximately $18 to $22 million for fiscal 2017. Additionally, as part of our growth strategy, we expect to evaluate opportunities to invest in or acquire other

41

Table of Contents

businesses, intellectual property or technologies that would complement or expand our current offerings, expand the breadth of our markets or enhance our technical capabilities.

Financing Activities

        Net cash used in financing activities was $52.3 million during fiscal 2016, compared to net cash used of $83.8 million during fiscal 2015. The decrease in cash outflows was principally due to a decrease of $89.7 million in payments on debt and a decrease of $30.9 million for repurchases of our common stock, offset by $81.2 million in net proceeds from the issuance of long-term debt during fiscal 2015 and an increase of $5.0 million for payments of acquisition-related contingent consideration. In July 2015, we amended our Credit Agreement. In August 2015, the Board of Directors authorized a program to repurchase up to $100 million of our common stock through December 2016. In January 2017, the Board of Directors authorized a program to repurchase up to $100 million of our common stock through December 2017.

        Net cash used in financing activities was $83.8 million during fiscal 2015, compared to net cash used of $65.2 million during fiscal 2014. The increase in cash outflows was principally due to an increase of $87.2 million in payments on debt and a decrease of $10.2 million from proceeds from the issuance of common stock, net of cash paid for withheld taxes, offset by net proceeds of $81.2 million from the issuance of long-term debt.

Debt

        On July 31, 2012, we entered into a $230 million five-year Credit Agreement (the "Credit Agreement"), which consisted of a $100 million Term Loan Facility and a $130 million Revolving Credit Facility (collectively, the "Credit Facilities"). On July 24, 2015, we amended the Credit Agreement (the "Amended Credit Agreement") in order to, among other things, increase the borrowing capacity under the Revolving Credit Facility to $300 million, eliminate the Term Loan Facility and extend the maturity date to five years from the closing date. On July 24, 2015, we borrowed $82.5 million under the Amended Credit Agreement and paid off the remaining balance of our Term Loan Facility.

        The Amended Credit Agreement includes a $25 million letter of credit sublimit and a $10 million swingline loan sublimit. We also have an option to increase the size of the borrowing capacity by up to an aggregate of $200 million in additional commitments, subject to certain conditions. See Note 10, Debt, to the Consolidated Financial Statements for additional information.

        Our future capital requirements will depend on many factors, including the rate of sales growth, market acceptance of our products, the timing and extent of research and development projects, potential acquisitions of companies or technologies and the expansion of our sales and marketing activities. We believe our existing cash, cash equivalents, investments and credit under our Credit Facilities are sufficient to meet our capital requirements through at least the next 12 months, although we could be required, or could elect, to seek additional funding prior to that time. We may enter into acquisitions or strategic arrangements in the future which also could require us to seek additional equity or debt financing.

42

Table of Contents

Contractual Obligations

        The following table summarizes our contractual obligations as of December 31, 2016 (in thousands):