Sintx Technologies, Inc. - Annual Report: 2019 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-K

For the fiscal year ended December 31, 2019

or

For the transition period from _______ to _________

Commission File No. 001-33624

SINTX Technologies, Inc.

(previously known as “Amedica Corporation”)

(Exact name of registrant as specified in its charter)

1885 West 2100 South, Salt Lake City, UT 84119

(Address of principal executive offices and Zip Code)

(801) 839-3500

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered under Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [  ] No [X]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes [  ] No [X]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [  ]

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes [X] No [  ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [  ]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [  ] No [X]

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter was $26,936,976.

The number of shares outstanding of the registrant’s common stock, $0.01 par value per share, as of March 19, 2020 was 10,563,618.

DOCUMENTS INCORPORATED BY REFERENCE:

None

TABLE OF CONTENTS

CAUTIONARY NOTE CONCERNING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements other than statements of historical fact are forward-looking statements. SINTX Technologies, Inc. (“we”, “us”, “ourselves”, “the Company”) has tried to identify forward-looking statements by using words such as “believe,” “may,” “might,” “could,” “will,” “aim,” “estimate,” “continue,” “anticipate,” “intend,” “expect,” “plan” and similar words. These forward-looking statements are based on our current assumptions, expectations and estimates of future events and trends. Forward-looking statements are only predictions and are subject to many risks, uncertainties and other factors that may affect our businesses and operations and could cause actual results to differ materially from those predicted. These risks and uncertainties include, but are not limited to, factors affecting our quarterly and annual results, our ability to manage our growth, our ability to sustain our profitability, demand for our products, our ability to compete successfully, our ability to rapidly develop and introduce new products, our ability to develop and execute on successful business strategies, our ability to comply with changes and applicable laws and regulations that are applicable to our businesses, our ability to safeguard our intellectual property, our success in defending legal proceedings brought against us, trends in the medical device industry, and general economic conditions, and other risks set forth throughout this Annual Report, including under “Item 1, Business,” “Item 1A, Risk Factors,” and “Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and those discussed in other documents we file with the Securities and Exchange Commission (the “SEC”). Moreover, we operate in an evolving environment. New risk factors and uncertainties emerge from time to time and it is not possible for us to predict all risk factors and uncertainties, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

Given these risks and uncertainties, readers are cautioned not to place undue reliance on any forward-looking statements. Forward-looking statements contained in this Annual Report speak only as of the date of this Annual Report. We undertake no obligation to update any forward-looking statements as a result of new information, events or circumstances or other factors arising or coming to our attention after the date hereof.

WHERE YOU CAN FIND MORE INFORMATION

We are subject to the informational requirements of the Exchange Act. Accordingly, we file periodic reports and other information with the SEC. We will make our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports available through our Internet site, https://ir.sintx.com/ as soon as reasonably practicable after electronically filing such materials with the SEC. They may also be obtained free of charge by writing to SINTX Technologies, Inc., Attn: Investor Relations, 1885 West 2100 South, Salt Lake City, UT 84119. In addition, copies of these reports may be obtained through the SEC’s website at www.sec.gov or by visiting the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549 or by calling the SEC at 800-SEC-0330. Our common stock trades on The NASDAQ Capital Market under the symbol “SINT.”

Unless otherwise indicated, all information contained in this Annual Report reflects a 1-for-15 reverse split of our common stock which was effected on January 25, 2016, a 1-for-12 reverse split which was effected on November 10, 2017, and a 1-for-30 reverse split which was effected on July 26, 2019.

PART I

Overview – SINTX Technologies

We are an advanced materials company focused on providing ceramic based solutions in a variety of medical and industrial applications. To date, our primary focus has been the research, development and commercialization of medical implant products manufactured with silicon nitride. We believe that silicon nitride has a superb combination of properties that make it ideally suited for long-term human implantation. Other biomaterials are based on bone grafts, metal alloys, and polymers- all of which have well-known practical limitations and disadvantages. In contrast, silicon nitride has a legacy of success in the most demanding and extreme industrial environments. As a human implant material, silicon nitride offers bone ingrowth, resistance to bacterial and viral infection, ease of diagnostic imaging, resistance to corrosion, and superior strength and fracture resistance, among other advantages, all of which claims are validated in our large and growing inventory of peer-reviewed, published literature reports. We believe that our versatile silicon nitride manufacturing expertise positions us favorably to introduce new and innovative devices in the medical and non-medical fields.

We also believe that we are the first and only company to commercialize silicon nitride medical implants. Prior to October 1, 2018, we designed, manufactured and commercialized silicon nitride products for our own behalf in the spine implant market. Over 35,000 of our spinal implants manufactured with silicon nitride have been implanted into patients, with an excellent safety record. On October 1, 2018, we sold our spine implant business to CTL Medical and now manufacture spine implants made with silicon nitride for CTL Medical. Prior to selling our spine implant business to CTL Medical, we had received 510(k) regulatory clearance in the United States, a CE mark in Europe, ANVISA approval in Brazil, and ARTG and Prostheses approvals in Australia for a number of silicon nitride spine implant products designed for spinal fusion surgery. Spine implant products manufactured by us from silicon nitride are currently marketed and sold by CTL Medical under the Valeo® brand to surgeons and hospitals in the United States and to selected markets in Europe and South America. These implants are designed for use in cervical (neck) and thoracolumbar (lower back) spine surgery. We are collaborating with CTL Medical to establish commercial partners in other parts of the world and also working with other partners to obtain regulatory approval for silicon nitride implants in Japan.

The sale of our spine implant business to CTL Medical enables us to now focus on our core competencies. These core competencies are research and development of silicon nitride and the design and manufacture of medical and nonmedical products manufactured from silicon nitride and other ceramic materials for our own account and in collaboration with other manufacturers. We are targeting original equipment manufacturer (“OEM”) – including CTL Medical - and private label partnerships in order to accelerate adoption of silicon nitride in future markets such as coating products with silicon nitride, hip and knee replacements, dental and maxillofacial implants, extremities, trauma, and sports medicine. Existing biomaterials, based on plastics, metals, and bone grafts have well-recognized limitations that we believe are addressed by silicon nitride, and we are uniquely positioned to convert existing, successful implant designs made by other companies into products manufactured with silicon nitride. OEM and private label partnerships allow us to work with a variety of partners, accelerate the adoption of silicon nitride, and realize incremental revenue at improved operating margins, when compared to the cost-intensive direct sales model.

We believe that silicon nitride addresses many of the biomaterial-related limitations in fields such as hip and knee replacements, dental and maxillofacial implants, sports medicine, extremities, and trauma surgery. We further believe that the inherent material properties of silicon nitride, and the ability to formulate the material in a variety of compositions, combined with precise control of the surface properties of the material, opens up a number of commercial opportunities across orthopedic surgery, neurological surgery, maxillofacial surgery, and other medical disciplines.

Our grade of silicon nitride is of a very high quality and is well suited for a wide variety of applications that would benefit from its mechanical, thermal, and chemical properties. We have several commercial partnerships and have opportunities ranging from low-volume, highly engineered components to high-volume simple shapes.

We operate a 30,000 square foot manufacturing, laboratory and administrative facility at our corporate headquarters in Salt Lake City, Utah, and we believe we are the only vertically integrated silicon nitride medical device manufacturer in the world.

Overview - Biomaterials

Biomaterials are natural or synthetic biocompatible materials that are used in virtually every medical specialty to improve or preserve body functionality. Various types of biomaterials are used as essential components in medical devices, drug delivery systems, replacement and tissue repair technologies, prostheses, and diagnostic technologies.

There are four general categories of biomaterials:

Our Silicon Nitride Technology Platform

We believe we are the only FDA-cleared and ISO 13485 certified silicon nitride medical device manufacturing facility in the world, and the only provider of structural ceramics-based medical devices used for spinal fusion applications. Silicon nitride is a chemical compound comprised of the elements silicon and nitrogen, with the chemical formula Si₃N₄. Silicon nitride, an advanced ceramic, is lightweight, resistant to fracture and strong, and is used in many demanding mechanical, thermal and wear applications, such as in space shuttle bearings, jet engine components and body armor.

We believe our silicon nitride is ideal as an implant material and is superior to other biomaterials currently used in the market such as PEEK, allograft and autograft bone, metal and traditional oxide ceramics, none of which possess all of the favorable characteristics of silicon nitride:

Supporting Data

We and a number of independent third parties have conducted extensive biocompatibility, biomechanical, in vivo and in vitro testing on our silicon nitride composition to establish its safety and efficacy in support of regulatory clearance of our biomaterial, products and product candidates. We have also completed additional testing of our silicon nitride products and product candidates. The results of this testing have been published in over 130 peer reviewed publications and presentations that include basic science studies, small- and large-animal data, and human clinical studies. We believe that our product development strategy is consistent with the manner in which other biomaterials have been successfully introduced into the market and adopted as the standard of care. Listed below is an overview of some of the key testing completed on our silicon nitride biomaterial, products and product candidates to date, as well as other information about our silicon nitride and other biomaterials.

Biocompatibility

Before our silicon nitride was cleared by the FDA in 2008, we conducted a series of biocompatibility tests following the guidelines of the FDA and ISO and submitted the results to the FDA as part of the regulatory clearance process. These tests confirmed that our silicon nitride products meet required biocompatibility standards for human use.

Promotion of Bone Growth

In 2012, we conducted two separate studies at Brown University, the results of which suggest that the chemistry and inherent surface topography of our solid silicon nitride provides an optimal environment for bone growth onto and around the device.

The first study was a series of in vitro analyses of protein adsorption, or presence on the surface of the biomaterial, onto silicon nitride, PEEK and titanium. The results of this study indicated that adsorption of two key proteins necessary for bone growth (fibronectin and vitronectin) were up to eight times greater on our silicon nitride than on PEEK, and up to four times greater than on titanium. A third important protein (laminin) had up to two times greater adsorption on our silicon nitride than on PEEK, and up to two-and-one-half times greater adsorption than on titanium.

The second study was an in vivo investigation of the osteointegration characteristics of these same three biomaterials after they had been surgically implanted into the skulls of laboratory rats. This study included an examination of the effect of Staphylococcus epidermidis bacteria on osteointegration. At time intervals of up to three months after implantation of the biomaterial, the amount of new bone growth within the surgical site and in direct contact with the implanted biomaterial was evaluated. In the absence of bacteria, new bone formation within the surgical site surrounding our silicon nitride was approximately 69%, compared with 36% and 24% for titanium and PEEK, respectively. Similarly, bone in direct contact, or apposition, with our silicon nitride, titanium and PEEK was 59%, 19% and 8%, respectively. As is common, in the presence of bacteria, new bone formation within the surgical site was suppressed, but still significantly greater for our silicon nitride than for the other two biomaterials. Observed new bone growth within the surgical site surrounding our silicon nitride was 41%, compared with 26% and 21% for titanium and PEEK, respectively. At the implant interface, the bone apposition for our silicon nitride, titanium and PEEK was 23%, 9% and 5%, respectively. To further characterize the extent of osteointegration, the force needed to separate each implant from its surrounding bone was measured. A larger force needed to separate the implant is an indication of improved osteointegration. At three months after implantation, in the absence of bacteria, the force required to separate our silicon nitride from its surrounding bone was approximately three times that of PEEK, and nearly two times that of titanium. In the presence of bacteria, there was effectively no separation force required for PEEK, indicating essentially no osteointegration. Our silicon nitride required over five times the force to separate it from its surrounding bone in the presence of bacteria in comparison to titanium.

In 2008, we conducted an animal study in which we evaluated the level of osteointegration of our porous silicon nitride with a knee-defect model in adult sheep. At three months after implantation, three out of five of the silicon nitride implants had extensive new bone formation at and into the implant surface, showing that the bone had grown into our porous silicon nitride to a depth of 3 millimeters, or mm. This animal study demonstrated the rapid osteointegration potential of our porous silicon nitride composition.

Hardness, Strength and Resistance to Fracture

Comparative Information

As shown in the table of comparative information publicly available about various biomaterials below:

Comparison of Mechanical Properties Among Orthopedic Biomaterials

We believe that the combination of high hardness, strength and fracture resistance positions our silicon nitride as an ideal biomaterial for many medical applications.

Burst Strength

In 2006, we conducted in-house comparative “burst strength” tests on femoral heads made from our silicon nitride produced by a contract manufacturer to our specifications and femoral heads made from one of the strongest commercially available ceramics, BIOLOX^® delta (zirconia-toughened alumina). These tests were performed on three designs of 28 mm femoral heads using accepted testing protocols. The tests involved applying a load to each femoral head while mounted on a cobalt-chromium simulated hip implant stem, until the head burst. This enabled us to directly compare the strength of the femoral heads made of the two biomaterials. The results also provided an indication of each biomaterial’s resistance to fracture. The results of these tests are shown in the chart below.

The average burst test strength for the silicon nitride femoral heads in these tests was 75 kilonewtons, or kNs, compared with 65 kN for BIOLOX^® delta, or about a 15% improvement. The burst strengths observed in our tests for BIOLOX^® delta femoral heads are comparable to those observed by an independent party testing the same design BIOLOX^® delta femoral heads as we did. We also conducted burst strength tests of 36 mm femoral heads made from our silicon nitride which showed those femoral heads had burst strengths that averaged 164 kN.

Resistance to Wear

In 2011, we commissioned an independent laboratory to conduct a wear study using our silicon nitride femoral heads. We tested our 28 mm silicon nitride femoral heads articulated against cross-linked polyethylene acetabular liners and our 40 mm silicon nitride femoral heads articulated against cross-linked polyethylene acetabular liners using well-established protocols in a hip simulator for their wear performance over 5 million cycles. We then compared the results for our silicon nitride product candidates to the results for the cobalt chrome femoral head and publicly available data from other commonly paired products. The results and comparison showed that:

Antibacterial Properties

The results of the two studies at Brown University in 2012, demonstrate that our solid silicon nitride has antibacterial properties. The objective of the in vitro study was to determine how our silicon nitride, PEEK and titanium interact with bacteria, protein and bone cells without the use of antibiotics and compared the growth of five different types of bacteria on silicon nitride, PEEK and titanium over time. Live bacteria counts were between 8 to 30 times lower on silicon nitride than PEEK and up to 8 times lower on silicon nitride than titanium.

In the in vivo study, bacteria were applied to the biomaterials before implantation. Three months after implantation, no infection was observed with silicon nitride, whereas both PEEK and titanium showed infection. The data demonstrate that our silicon nitride inhibits biofilm formation and bacterial colonization around the biomaterial.

Antiviral and Antifungal Properties

Antiviral: Our data have shown that off-stoichiometric reactions at the surface of our silicon nitride can inactivate different types of single-strand RNA viruses. This antiviral property derives from reactive nitrogen species without harm to mammalian cells. Testing based on polymerase chain reaction tests of viral RNA and in situ Raman spectroscopy suggest that our material is effective in counteracting several viruses relevant to public health concerns, such as Influenza A, Feline calcivirus, and Enterovirus.

Antifungal: We have conducted preliminary studies which suggest that our silicon nitride may be effective against fungal microbes. After sintering and processing, powdered silicon nitride was dissolved in a 1.5 vol.% aqueous solution that underwent field testing on two species of grape vine leaves that were infected with a fungal pathogen Plasmopara viticola. After 1 minute of exposure to our silicon nitride, the infected area of the leaves was reduced by ~95%. The likely mechanism likely involves electrical attraction to, and attachment of silicon nitride particles to oppositely-charged pathogen spores.

Imaging Compatibility

In 2007, we conducted a study to compare the imaging characteristics of test blanks made of PEEK, the metals titanium and tantalum, and silicon nitride using a cadaver human vertebral body. Images of the vertebral body and the blanks were obtained using X-ray, CT and MRI under identical conditions. We assessed the radiolucent characteristics of the blanks in X-ray images quantitatively, assessed the presence of scatter in CT qualitatively and assessed distortion in MRI quantitatively. In X-ray, the metal blanks did not permit visualization of the underlying bone of the vertebral body, while PEEK was transparent, rendering its location difficult to determine. The silicon nitride blank had an intermediate radiolucency that rendered it visible and allowed a visual assessment of the underlying bone of the vertebral body. CT and MRI of the metal blanks indicated the presence of distortion while silicon nitride and PEEK exhibited no scattering.

Our Forms of Silicon Nitride

To control the quality, cost and availability of our silicon nitride products and product candidates, we operate our own manufacturing facility. Our 30,000 square foot corporate facility includes an 18,000 square foot FDA Registered and ISO 13485 certified medical device manufacturing space. It is equipped with state-of-the-art powder processing, spray drying, pressing and computerized machining equipment, sintering furnaces, and other testing equipment that enables us to control the entire manufacturing process for our silicon nitride products and product candidates. To our knowledge, we are the only vertically integrated silicon nitride orthopedic medical device manufacturer in the world. All operations with the exception of raw material production are performed in-house. We purchase raw materials, consisting of silicon nitride ceramic powder and dopant chemical compounds, from several vendors which are ISO registered and approved by us. These raw materials are characterized and tested in accordance with our specifications and then blended to formulate our silicon nitride. We believe that there are multiple vendors that can supply us these raw materials and we continually monitor the quality and pricing offered by our vendors to ensure high quality and cost-effective supply of these materials.

The chemical composition of our in-house formulation of silicon nitride and our processing and manufacturing experience allow us to produce silicon nitride in four distinct forms. This capability provides us with the ability to utilize our silicon nitride biomaterial in a variety of ways depending on the intended application, which, together with our silicon nitride’s key characteristics, distinguishes us from manufacturers of products using other biomaterials.

We currently produce silicon nitride for use in our commercial products and product candidates in the following forms:

	●	Solid Silicon Nitride. This form of silicon nitride is a fully dense, load-bearing solid used for devices that require high strength, toughness, fracture resistance and low wear, including interbody spinal fusion devices, hip and knee replacement implants, and dental implants.

	●	Porous Silicon Nitride. While this form of silicon nitride has a chemical composition that is identical to that of our monolithic solid silicon nitride, this formulation has a porous structure, which is engineered to mimic cancellous bone, the spongy bone tissue that typically makes up the interior of human bones. Our porous silicon nitride has interconnected pores ranging in size between about 90 and 600 microns, which is similar to that of cancellous bone. This form of silicon nitride can be used for the promotion of bone in-growth and attachment. We believe our porous silicon nitride can act as a substitute for the orthobiologics currently used to fill interbody devices in an effort to stimulate fusion, as a bone void filler, and as a porous scaffold for medical devices.
	●	Composite of Solid and Porous Silicon Nitride. This form of silicon nitride is a combination, or composite, of our solid monolithic and porous formulations of silicon nitride. This composite may be used to manufacture devices and implants that mimic the structure of natural bone by incorporating both a fully dense, load-bearing solid component on the outside and a porous component intended to promote bone in-growth on the inside. This composite form of silicon nitride is used in interbody spinal fusion devices and can be used in components for total hip and knee replacement implants.
	●	Composite of Silicon Nitride and PEEK. We have demonstrated in the laboratory that it is possible to compound our silicon nitride powder and the polymer PEEK and that the ensuing composite material maintains the bioactive properties of silicon nitride. We have engaged commercial partners to assist us in developing this technology. This composite material would allow the straightforward machinability of a complex device that would be more challenging to manufacture from silicon nitride alone.
	●	Silicon Nitride Coating. With a similar chemical composition as our other forms of silicon nitride, this form of silicon nitride can be applied as an adherent coating to metallic substrates, including cobalt-chromium, titanium and steel alloys, polymers, and ceramics. We believe applying an extremely thin layer of silicon nitride as a coating may provide a highly wear-resistant articulation surface, such as on femoral heads, which may reduce problems associated with metal or polymer wear debris. We also believe that the silicon nitride coating can be applied to devices that require firm fixation and functional connections between the device or implant and the surrounding tissue, such as hip stems and screws. The use of silicon nitride coating may also create an antibacterial, antiviral, and antifungal barrier between the device and the adjacent bone or tissue. We are currently evaluating several different coating technologies.

Our Competitive Strengths

We believe we can use our silicon nitride technology platform to become a leading biomaterial company and have the following principal competitive strengths:

Our Strategy

Our goal is to become a leading biomaterial company focused on using our silicon nitride technology platform to develop, manufacture and commercialize a broad range of medical devices. Key elements of our strategy to achieve this goal are the following:

Market Opportunity

Overview

We believe our silicon nitride biomaterial technology platform provides us with numerous competitive advantages in the biomaterials market. We manufactured interbody spinal fusion devices for our own retail spine business from 2008 to 2018, presently manufacture these for CTL Medical, and have a 10-year exclusive right to continue to manufacture them for CTL Medical. We are developing products on our own behalf and for third party manufacturers – including CTL Medical - for use as components in spine, total hip and knee joint replacements, as well as dental and maxillofacial applications. We believe we can also utilize our silicon nitride technology platform to develop future products in additional medical and non-medical markets.

We believe that the main drivers for growth within the orthopedic biomaterials market are the following:

The Interbody Spinal Fusion Market

We believe there is opportunity for significant growth in the spinal fusion market for interbody spinal fusion devices manufactured with silicon nitride. Currently, in spinal fusion procedures conducted in the United States today, a significant majority utilize interbody devices comprised of PEEK and bone, with occasional use of metals and other materials including ceramics. The market for interbody spinal fusion devices has shifted over time as new biomaterials with superior characteristics have been incorporated into these devices and have launched into the market. We believe the market has reached another inflection point as surgeons and hospitals recognized the limitations of devices currently available. Similarly, we believe silicon nitride interbody spinal fusion products address the key limitations of other biomaterials currently used in interbody spinal fusion devices and demonstrate superior characteristics needed to improve clinical outcomes.

We selected this market as the first application for our silicon nitride technology because of the limitations of currently available products, its size, and the key characteristics silicon nitride possesses, which are critical for superior interbody spinal fusion outcomes.

Spinal Fusion Products

Current spinal fusion products that we manufacture for CTL Medical are:

The Dental Market

We believe there is opportunity for significant growth in the dental implant market for dental implant devices manufactured with silicon nitride and are pursuing this opportunity aggressively. We have entered into a joint development agreement with a dental implant design company and distributor of dental technologies for the development of a silicon nitride based dental implant system and devices.

When a tooth is removed, one common approach to restoration is to use a multi-part construct consisting of a titanium implant (or screw), a zirconia abutment, and a crown. Potential applications for silicon nitride in this procedure include the implant and the abutment.

Silicon nitride is appealing because this application takes advantage of the same bioactive properties discussed in the spinal implant section:

We also believe it may be possible to leverage our knowledge of medical device manufacturing of ceramics and commercialize products for the dental market made from ceramics other than silicon nitride. We have engaged an investment banker to assist us in identifying partner companies for our technologies.

The Hip and Knee Joint Replacement Market

We believe there is opportunity for significant growth in the hip and knee joint replacement market for interbody devices manufactured with silicon nitride.

Total joint replacement involves removing the diseased or damaged joint and replacing it with an artificial implant consisting of components made from several different types of biomaterials. The key components of a total hip implant include an artificial femoral head, consisting of a ball mounted on an artificial stem attached to the femur, and a liner, which is placed inside a cup affixed into the pelvic bone. The femoral head and liner move against each other to replicate natural motion in what is known as an articulating implant. Total knee replacement implants also use articulating components and are comprised of the following four main components: a femoral condyle, which is a specially shaped bearing that is affixed to the lower end of the femur; a tibial tray that is affixed to the upper-end of the tibia; a tibial insert that is rigidly fixed to the tibial tray and serves as the surface against which the femoral condyle articulates; and a patella, or knee cap, which also articulates against the femoral condyle.

Implants for total hip and knee replacements are primarily differentiated by the biomaterials used in the components that articulate against one another. The combinations of biomaterials most commonly used in hip and knee replacement implants in the United States are metal-on-cross-linked polyethylene and traditional oxide ceramic-on-cross-linked polyethylene. The use of hip replacement implants incorporating metal-on-metal and traditional oxide ceramic-on-traditional ceramic biomaterials experienced a steep decline in the United States over the last several years due to their significant limitations. We believe that the most commonly used biomaterials in joint replacement implants also have limitations, and do not possess all of the following key characteristics required for optimal total joint replacement implants:

Our Total Hip Implant Product Candidates

We have developed a femoral head that is made from our solid silicon nitride, which could be used for total hip replacement product candidates. This femoral head is expected to articulate against a cross-linked polyethylene liner fixed into a metal acetabular cup. Most recently we participated in a university study that demonstrated the comparatively better behavior of silicon nitride femoral heads in taper fretting corrosion behavior study. As we continue to gather evidence that silicon nitride femoral heads are superior in terms of wear performance, taper corrosion, strength and in vitro hydrothermal stability, we eventually intend to commercialize this product in cooperation with a strategic partner. However, clearance of these types of devices by the FDA will be required. Currently, the FDA has indicated that a limited one to two-year clinical trial may be necessary to obtain clearance.

Our Total Knee Implant Product Candidates

We have developed a femoral condyle design made from our solid silicon nitride. The femoral condyle component will attach to the lower end of the femur. The femoral condyle is expected to articulate against a cross-linked polyethylene tibial insert that will attach to the tibial tray at the upper end of the tibia, which we expect will be made from metal. We have successfully made prototypes of this design. Following the potential clearance of the femoral head components (discussed above), we intend to initiate biomechanical testing with a strategic partner for silicon nitride components for use in knee replacement procedures to support a 510(k) submission to the FDA. If this clearance is eventually obtained, we intend to commercialize our products for use in total knee replacement surgeries post-FDA clearance.

Other Product Opportunities

Our silicon nitride technology platform is adaptable, and we believe it may be used to develop products to address other significant opportunities, such as in the cranial-maxillofacial, extremities, sports medicine and trauma markets.

We also believe our coating technology may be used to enhance metal products as well as other commercially available metal or PEEK spinal fusion and joint replacement products. We have produced feasibility prototypes of dental implants, other components for use in total hip implants in addition to our total hip and knee implant product candidates discussed above, a suture anchor for sports medicine applications, an osteotomy wedge for extremities applications, and prototypes of silicon nitride-coated plates for potential trauma applications. We have also developed a process to apply our silicon nitride as a coating on other materials which may find applications in markets outside of the medical device industry.

Our recent discoveries of the antiviral and antifungal properties of silicon nitride have opened up completely new opportunities for us in the consumer and agriculture markets.

The FDA has not evaluated any of these potential products and we are not currently advancing the development of any of these product candidates. We plan to collaborate with medical device companies to complete the development of and commercialize any product candidates we advance in these areas or develop any one of them ourselves if sufficient resources should become available.

We also see a wide variety of opportunities for our silicon nitride technology platform in non-medical applications. To that effect, we have begun applying our technology to the manufacture of products for several third-party ceramic companies which we are hopeful will result in commercial partnerships with opportunities ranging from low-volume, highly engineered components to high-volume simple shapes.

Intellectual Property

We rely on a combination of patents, trademarks, trade secrets, nondisclosure agreements, proprietary information ownership agreements and other intellectual property measures to protect our intellectual property rights. We believe that in order to have a competitive advantage, we must continue to develop and maintain the proprietary aspects of our technologies.

We have thirteen issued U.S. patents, three pending U.S. non-provisional patent applications, three pending U.S. provisional patent applications, seven pending foreign applications and two pending PCT patent applications. Our first issued patent expired in 2016, with the last of these patents expiring in 2036. The core patent (US 6,881,229) expires in 2022.

We have seven U.S. patents directed to articulating implants using our high-strength, high toughness doped silicon nitride solid ceramic. The issued patents, which include US 6,881,229; US 7,666,229; US 7,780,738; US 8,123,812; US 8,133,284; US 9,051,639; and US 9,517,136 begin to expire in 2022.

We also have two U.S. patents related to our CSC technology that are directed to implants that have both a dense load-bearing, or cortical, component and a porous, or cancellous, component, together with a surface coating. These issued patents, US 8,133,284 and US 9,649,197 will expire in 2022 and 2035, respectively.

With respect to PCT patent application serial no. PCT/US2018/014781 directed to antibacterial biomedical implants, we recently entered the national stage in Europe, Australia, Brazil, Canada, China, Japan, and South Korea in order to seek potential patent protection for our proprietary technologies in those countries.

In relation to the sale of our spine implant business to CTL Medical under the Asset Purchase Agreement dated September 5, 2018 we assigned our entire right to forty eight (48) U.S. patents, two (2) foreign patents and three (3) pending patent applications from our patent portfolio to CTL Medical under that transaction. In addition, three (3) U.S. patents (U.S. patent nos. 9,399,309; 9,517,136; and 9,649,197) directed to silicon nitride manufacturing processes were licensed to CTL Medical under an irrevocable, fully paid-up, worldwide license for a ten year term with CTL Medical also having a Right of First Negotiation to acquire these patents if SINTX decides to later sell these IP assets to a third party. The previously listed licensed patents under Schedule A that were licensed to SINTX (Amedica) by the Dr. Jackson and SMS Trust pursuant to a license agreement between the parties has been assigned to CTL Medical as part of the sale of the spine business.

Our remaining issued patents and pending applications are directed to additional aspects of our products and technologies including, among other things:

We also expect to rely on trade secrets, know-how, continuing technological innovation and in-licensing opportunities to develop and maintain our intellectual property position. However, trade secrets are difficult to protect. We seek to protect the trade secrets in our proprietary technology and processes, in part, by entering into confidentiality agreements with commercial partners, collaborators, employees, consultants, scientific advisors and other contractors and into invention assignment agreements with our employees and some of our commercial partners and consultants. These agreements are designed to protect our proprietary information and, in the case of the invention assignment agreements, to grant us ownership of the technologies that are developed.

Competition

The main alternatives to our silicon nitride biomaterial include: PEEK, which is predominantly manufactured by Invibio; BIOLOX^® delta, which is a traditional oxide ceramic manufactured by CeramTec; allograft bone; metals; and coated metals.

We believe our main competitors in the orthopedic implant market, which utilize a variety of competitive biomaterials, include: Medtronic, Inc.; DePuy Synthes Companies, a group of Johnson & Johnson companies; Stryker Corporation; Biomet, Inc.; Zimmer Holdings, Inc.; Smith & Nephew plc; and Aesculap Inc. Presently, these companies buy ceramic components on an OEM basis from manufacturers such as CeramTec, Kyocera and CoorsTek, Inc., among others. We anticipate that these and other orthopedic companies and OEMs will seek to introduce new biomaterials and products that compete with ours.

Competition within the industry is primarily based on technology, innovation, product quality, and product awareness and acceptance by surgeons. Our principal competitors have substantially greater financial, technical and marketing resources, as well as significantly greater manufacturing capabilities than we do, and they may succeed in developing products that render our implants and product candidates non-competitive. Our ability to compete successfully will depend upon our ability to develop innovative products with advanced performance features based on our silicon nitride technologies.

Government Regulation of Medical Devices

Governmental authorities in the United States, at the federal, state and local levels, and other countries extensively regulate, among other things, the research, development, testing, manufacture, labeling, promotion, advertising, distribution, marketing and export and import of products such as those we are commercializing and developing. Failure to obtain approval or clearance to market our products and products under development and to meet the ongoing requirements of these regulatory authorities could prevent us from continuing to market or develop our products and product candidates.

United States

Pre-Marketing Regulation

In the United States, medical devices are regulated by the FDA. Unless an exemption applies, a new medical device will require either prior 510(k) clearance or approval of a premarket approval application, or PMA, before it can be marketed in the United States. The information that must be submitted to the FDA in order to obtain clearance or approval to market a new medical device varies depending on how the medical device is classified by the FDA. Medical devices are classified into one of three classes on the basis of the controls deemed by the FDA to be necessary to reasonably ensure their safety and effectiveness. Class I devices, which are those that have the lowest level or risk associated with them, are subject to general controls, including labeling, premarket notification and adherence to the QSR. Class II devices are subject to general controls and special controls, including performance standards. Class III devices, which have the highest level of risk associated with them, are subject to most of the previously identified requirements as well as to premarket approval. Most Class I devices and some Class II devices are exempt from the 510(k) requirements, although manufacturers of these devices are still subject to registration, listing, labeling and QSR requirements.

A 510(k) premarket notification must demonstrate that the device in question is substantially equivalent to another legally marketed device, or predicate device, that did not require premarket approval. In evaluating the 510(k), the FDA will determine whether the device has the same intended use as the predicate device, and (a) has the same technological characteristics as the predicate device, or (b) has different technological characteristics, and (i) the data supporting the substantial equivalence contains information, including appropriate clinical or scientific data, if deemed necessary by the FDA, that demonstrates that the device is as safe and as effective as a legally marketed device, and (ii) does not raise different questions of safety and effectiveness than the predicate device. Most 510(k)s do not require clinical data for clearance, but the FDA may request such data. The FDA’s goal is to review and act on each 510(k) within 90 days of submission, but it may take longer based on requests for additional information. In addition, requests for additional data, including clinical data, will increase the time necessary to review the notice. If the FDA does not agree that the new device is substantially equivalent to the predicate device, the new device will be classified in Class III, and the manufacturer must submit a PMA. Since July 2012, however, with the enactment of the Food and Drug Administration Safety and Innovation Act, or FDASIA, a de novo pathway is directly available for certain low to moderate risk devices that do not qualify for the 510(k) pathway due to lack of a predicate device. Modifications to a 510(k)-cleared medical device may require the submission of another 510(k) or a PMA if the changes could significantly affect the safety or effectiveness or constitute a major change in the intended use of the device.

Modifications to a 510(k)-cleared device frequently require the submission of a traditional 510(k), but modifications meeting certain conditions may be candidates for FDA review under a Special 510(k). If a device modification requires the submission of a 510(k), but the modification does not affect the intended use of the device or alter the fundamental scientific technology of the device, then summary information that results from the design control process associated with the cleared device can serve as the basis for clearing the application. A Special 510(k) allows a manufacturer to declare conformance to design controls without providing new data. When the modification involves a change in material, the nature of the “new” material will determine whether a traditional or Special 510(k) is necessary. For example, in its Device Advice on How to Prepare a Special 510(k), the FDA uses the example of a change in a material in a finger joint prosthesis from a known metal alloy to a ceramic that has not been used in a legally marketed predicate device as a type of change that should not be submitted as a Special 510(k). However, if the “new” material is a type that has been used in other legally marketed devices within the same classification for the same intended use, a Special 510(k) is appropriate. The FDA gives as an example a manufacturer of a hip implant who changes from one alloy to another that has been used in another legally marketed predicate. Special 510(k)s are typically processed within 30 days of receipt.

The PMA process is more complex, costly and time consuming than the 510(k) clearance procedure. A PMA must be supported by extensive data including, but not limited to, technical, preclinical, clinical, manufacturing, control and labeling information to demonstrate to the FDA’s satisfaction the safety and effectiveness of the device for its intended use. After a PMA is submitted, the FDA has 45 days to determine whether it is sufficiently complete to permit a substantive review. If the PMA is complete, the FDA will file the PMA. The FDA is subject to performance goal review times for PMAs and may issue a decision letter as a first action on a PMA within 180 days of filing, but if it has questions, it will likely issue a first major deficiency letter within 150 days of filing. It may also refer the PMA to an FDA advisory panel for additional review and will conduct a preapproval inspection of the manufacturing facility to ensure compliance with the QSR, either of which could extend the 180-day response target. While the FDA’s ability to meet its performance goals has generally improved during the past few years, it may not meet these goals in the future. A PMA can take several years to complete and there is no assurance that any submitted PMA will ever be approved. Even when approved, the FDA may limit the indication for which the medical device may be marketed or to whom it may be sold. In addition, the FDA may request additional information or request the performance of additional clinical trials before it will reconsider the approval of the PMA or as a condition of approval, in which case the trials must be completed after the PMA is approved. Changes to the device, including changes to its manufacturing process, may require the approval of a supplemental PMA.

If a medical device is determined to present a “significant risk,” the manufacturer may not begin a clinical trial until it submits an investigational device exemption, or IDE, to the FDA and obtains approval of the IDE from the FDA. The IDE must be supported by appropriate data, such as animal and laboratory testing results and include a proposed clinical protocol. These clinical trials are also subject to the review, approval and oversight of an institutional review board, or IRB, which is an independent and multi-disciplinary committee of volunteers who review and approve research proposals, and the reporting of adverse events and experiences, at each institution at which the clinical trial will be performed. The clinical trials must be conducted in accordance with applicable regulations, including but not limited to the FDA’s IDE regulations and current good clinical practices. A clinical trial may be suspended by the FDA, the IRB or the sponsor at any time for various reasons, including a belief that the risks to the study participants outweigh the benefits of participation in the trial. Even if a clinical trial is completed, the results may not demonstrate the safety and efficacy of a device or may be equivocal or otherwise not be sufficient to obtain approval.

Post-Marketing Regulation

After a device is placed on the market, numerous regulatory requirements apply. These include:

Failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may include any of the following sanctions:

To ensure compliance with regulatory requirements, medical device manufacturers are subject to market surveillance and periodic, pre-scheduled and unannounced inspections by the FDA, and these inspections may include the manufacturing facilities of our subcontractors.

International Regulation

International sales of medical devices are subject to foreign government regulations, which vary substantially from country to country. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA approval, and the requirements may differ. For example, the primary regulatory authority with respect to medical devices in Europe is that of the European Union. The European Union consists of 28 countries and has a total population of over 500 million people. The unification of these countries into a common market has resulted in the unification of laws, standards and procedures across these countries, which may expedite the introduction of medical devices like those we are offering and developing. Norway, Iceland, Lichtenstein and Switzerland are not members of the European Union but have transposed applicable European medical device laws into their national legislation. Thus, a device that is marketed in the European Union may also be recognized and accepted in those four non-member European countries as well.

The European Union has adopted numerous directives and standards regulating the design, manufacture, clinical trials, labeling and adverse event reporting for medical devices. Devices that comply with the requirements of relevant directives will be entitled to bear CE Conformity Marking, indicating that the device conforms to the essential requirements of the applicable directives and, accordingly, can be commercially distributed throughout the European Union. Actual implementation of these directives, however, may vary on a country-by-country basis. The CE Mark is a mandatory conformity mark on medical devices distributed and sold in the European Union and certifies that a medical device has met applicable requirements.

The method of assessing conformity varies, but normally involves a combination of self-assessment by the manufacturer and a third-party assessment by a “Notified Body.” Notified Bodies are independent testing houses, laboratories, or product certifiers authorized by the European Union member states to perform the required conformity assessment tasks, such as quality system audits and device compliance testing. An assessment by a Notified Body based within the European Union is required in order for a manufacturer to distribute the product commercially throughout the European Union. Medium and higher risk devices require the intervention of a Notified Body which will be responsible for auditing the manufacturer’s quality system. The Notified Body will also determine whether or not the product conforms to the requirements of the applicable directives. Devices that meet the applicable requirements of E.U. law and have undergone the appropriate conformity assessment routes will be granted CE “certification.” The CE Mark is mandatory for medical devices sold not only within the countries of the European Union but more generally within most of Europe. As many of the European standards are converging with international standards, the CE Mark is often used on medical devices manufactured and sold outside of Europe (notably in Asia that exports many manufactured products to Europe). CE Marking gives companies easier access into not only the European market but also to Asian and Latin American markets, most of whom recognize the CE Mark on medical device as a mark of quality and adhering to international standards of consumer safety, health or environmental requirements.

Compliance with Healthcare Laws

We must comply with various U.S. federal and state laws, rules and regulations pertaining to healthcare fraud and abuse, including anti-kickback and false claims laws, rules, and regulations, as well as other healthcare laws in connection with the commercialization of our products. Fraud and abuse laws are interpreted broadly and enforced aggressively by various state and federal agencies, including the U.S. Department of Justice, the U.S. Office of Inspector General for the Department of Health and Human Services and various state agencies.

We have entered into agreements with certain surgeons for assistance with the design of our products, some of whom we anticipate may make referrals to us or order our products. A majority of these agreements contain provisions for the payments of royalties. In addition, some surgeons currently own shares of our stock. We have structured these transactions with the intention of complying with all applicable laws, including fraud and abuse, data privacy and security, and transparency laws. Despite this intention, there can be no assurance that a particular government agency or court would determine our practices to be in full compliance with such laws. We could be materially impacted if regulatory or enforcement agencies or courts interpret our financial arrangements with surgeons to be in violation of healthcare laws, including, without limitation, fraud and abuse, data privacy and security, or transparency laws.

The U.S. federal Anti-Kickback Statute prohibits persons, including a medical device manufacturer (or a party acting on its behalf), from knowingly or willfully soliciting, receiving, offering or paying remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual for a service or product or the purchasing, ordering, arranging for, or recommending the ordering of, any service or product for which payment may be made by Medicare, Medicaid or any other federal healthcare program. This statute has been interpreted to apply to arrangements between medical device manufacturers on one hand and healthcare providers on the other. The term “remuneration” is not defined in the federal Anti-Kickback Statute and has been broadly interpreted to include anything of value, such as cash payments, gifts or gift certificates, discounts, waiver of payments, credit arrangements, ownership interests, the furnishing of services, supplies or equipment, and the provision of anything at less than its fair market value. Courts have broadly interpreted the scope of the law, holding that it may be violated if merely “one purpose” of an arrangement is to induce referrals, irrespective of the existence of other legitimate purposes. The Anti-Kickback Statute prohibits many arrangements and practices that are lawful in businesses outside of the healthcare industry. Although there are a number of statutory exemptions and regulatory safe harbors protecting certain business arrangements from prosecution, the exemptions and safe harbors are drawn narrowly, and practices that involve remuneration intended to induce prescribing, purchasing or recommending may be subject to scrutiny if they do not qualify for an exemption or safe harbor. Our practices may not in all cases meet all of the criteria for safe harbor protection from federal Anti-Kickback Statute liability. The reach of the Anti-Kickback Statute was broadened by the recently enacted Patient Protection and Affordable Care Act of 2010 and the Health Care and Education Affordability Reconciliation Act of 2010, collectively, the Affordable Care Act or ACA, which, among other things, amends the intent requirement of the federal Anti-Kickback Statute such that a person or entity no longer needs to have actual knowledge of the statute or specific intent to violate it in order to have committed a violation. In addition, the ACA provides that the government may assert that a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal False Claims Act (discussed below) or the civil monetary penalties statute, which imposes fines against any person who is determined to have presented or caused to be presented claims to a federal healthcare program that the person knows or should know is for an item or service that was not provided as claimed or is false or fraudulent. In addition to the federal Anti-Kickback Statute, many states have their own anti-kickback laws. Often, these laws closely follow the language of the federal law, although they do not always have the same scope, exceptions, safe harbors or sanctions. In some states, these anti-kickback laws apply not only to payments made by government healthcare programs but also to payments made by other third-party payors, including commercial insurance companies.

Sales, marketing, consulting, and advisory arrangements between medical device manufacturers and sales agents and physicians are subject to the Anti-Kickback Statute and other fraud and abuse laws. Government officials have focused recent enforcement efforts on, among other things, the sales and marketing activities of healthcare companies, including medical device manufacturers, and have brought cases against individuals or entities whose personnel allegedly offered unlawful inducements to potential or existing customers in an attempt to procure their business. We expect these activities to continue to be a focus of government enforcement efforts. Settlements of these cases by healthcare companies have involved significant fines and penalties and, in some instances, criminal plea agreements. We are also aware of governmental investigations of some of the largest orthopedic device companies reportedly focusing on consulting and service agreements between these companies and orthopedic surgeons. These developments are ongoing, and we cannot predict the effects they will have on our business.

The federal False Claims Act imposes liability on any person that, among other things, knowingly presents, or causes to be presented, a false or fraudulent claim for payment by a federal healthcare program. The qui tam provisions of the False Claims Act allow a private individual to bring civil actions on behalf of the federal government alleging that the defendant has submitted a false claim, or has caused such a claim to be submitted, to the federal government, and to share in any monetary recovery. There are many potential bases for liability under the False Claims Act. Liability arises, primarily, when a person knowingly submits, or causes another to submit, a false claim for reimbursement to the federal government. The False Claims Act has been used to assert liability on the basis of inadequate care, kickbacks, and other improper referrals, and allegations as to misrepresentations with respect to the services rendered. Qui tam actions have increased significantly in recent years, causing greater numbers of healthcare companies, including medical device manufacturers, to defend false claim actions, pay damages and penalties, or be excluded from participation in Medicare, Medicaid or other federal or state healthcare programs as a result of investigations arising out of such actions. In addition, various states have enacted similar laws analogous to the False Claims Act. Many of these state laws apply where a claim is submitted to any third-party payor and not merely a federal healthcare program. We are unable to predict whether we would be subject to actions under the False Claims Act or a similar state law, or the impact of such actions. However, the cost of defending such claims, as well as any sanctions imposed, could adversely affect our financial performance. The Health Insurance Portability and Accountability Act of 1996, or HIPAA, also created several new federal crimes, including healthcare fraud and false statements relating to healthcare matters. The healthcare fraud statute prohibits knowingly and willfully executing a scheme to defraud any healthcare benefit program, including private third-party payors. The false statements statute prohibits knowingly and willfully falsifying, concealing, or covering up a material fact or making any materially false, fictitious, or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items, or services.

In addition, we may be subject to, or our marketing or research activities may be limited by, data privacy and security regulation by both the federal government and the states in which we conduct our business. For example, HIPAA and its implementing regulations established uniform federal standards for certain “covered entities” (healthcare providers, health plans and healthcare clearinghouses) governing the conduct of certain electronic healthcare transactions and protecting the security and privacy of protected health information. The American Recovery and Reinvestment Act of 2009, commonly referred to as the economic stimulus package, included expansion of HIPAA’s privacy and security standards called the Health Information Technology for Economic and Clinical Health Act, or HITECH, which became effective on February 17, 2010. Among other things, HITECH makes HIPAA’s privacy and security standards directly applicable to “business associates”—independent contractors or agents of covered entities that create, receive, maintain, or transmit protected health information in connection with providing a service for or on behalf of a covered entity. HITECH also increased the civil and criminal penalties that may be imposed against covered entities, business associates and possibly other persons, and gave state attorneys general new authority to file civil actions for damages or injunctions in federal courts to enforce the federal HIPAA laws and seek attorney’s fees and costs associated with pursuing federal civil actions. These laws also require the reporting of breaches of protected health information to affected individuals, regulators and in some cases, local or national media. HIPAA and HITECH impose strict limits on our physician collaborators’ ability to use and disclose patient information on our behalf.

There are also an increasing number of state “sunshine” laws that require manufacturers to provide reports to state governments on pricing and marketing information. Several states have enacted legislation requiring medical device companies to, among other things, establish marketing compliance programs, file periodic reports with the state, make periodic public disclosures on sales and marketing activities, and to prohibit or limit certain other sales and marketing practices. In addition, a federal law known as the Physician Payments Sunshine Act, now requires medical device manufacturers to track and report to the federal government certain payments and other transfers of value made to physicians and teaching hospitals and ownership or investment interests held by physicians and their immediate family members. The first reporting period covered only payments or transfers of value made and ownership or investment interests held by physicians and their immediate family members from August 1, 2013 to December 31, 2013. The federal government disclosed the reported information on a publicly available website beginning in September 2014. For calendar year 2014, the Physician Payments Sunshine Act will require medical device manufacturers to report payments and transfers of values made and ownership or investment interests held by physicians and their immediate family members for the full calendar year. These laws may adversely affect our sales, marketing, and other activities by imposing administrative and compliance burdens on us. If we fail to track and report as required by these laws or to otherwise comply with these laws, we could be subject to the penalty provisions of the pertinent state and federal authorities.

Clinical research is heavily regulated by FDA regulations for the protection of human subjects (21 C.F.R. 50 and 56) and also the regulations of the U.S Department of Health and Human Services, or the Common Rule (45 C.F.R 46). Both FDA human subject regulations and the Common Rule impose restrictions on the involvement of human subjects in clinical research and require, among other things, the balancing of the risks and benefits of research, the documented informed consent of research participants, initial and ongoing review of research by an IRB. Similar regulations govern research conducted in foreign countries. Compliance with human subject protection regulations is costly and time consuming. Failure to comply could substantially and adversely impact our research program and the development of our products.

Because of the breadth of these laws and the narrowness of available statutory and regulatory exemptions, it is possible that some of our business activities could be subject to challenge under one or more of such laws. If our operations are found to be in violation of any of the federal and state laws described above or any other governmental regulations that apply to us, we may be subject to penalties, including criminal and significant civil monetary penalties, damages, fines, imprisonment, exclusion from participation in government healthcare programs, injunctions, recall or seizure of products, total or partial suspension of production, denial or withdrawal of pre-marketing product clearances and approvals, private “qui tam” actions brought by individual whistleblowers in the name of the government or refusal to allow us to enter into supply contracts, including government contracts, and the curtailment or restructuring of our operations. Public disclosure of privacy and data security violations could cause significant reputational harm. Any of these events could adversely affect our ability to operate our business and our results of operations. To the extent that any of our products are sold in a foreign country, we may be subject to similar foreign laws and regulations, which may include, for instance, applicable post-marketing requirements, including safety surveillance, anti-fraud and abuse laws, implementation of corporate compliance programs, as well as laws and regulations requiring transparency of pricing and marketing information and governing the privacy and security of health information, such as the E.U.’s Directive 95/46 on the Protection of Individuals with regard to the Processing of Personal Data, or the Data Directive, and the wide variety of national laws implementing the Data Directive.

Healthcare Reform

The regulations we are subject to may change as result of legislative and regulatory healthcare reform.

Significant healthcare reform was enacted in 2010 when the Patient Protection and Affordable Care Act or the PPACA, was signed into law. State laws also were enacted to implement the PPACA. While a primary goal of these healthcare reform efforts was to expand coverage to more individuals, it also involved increased government price controls, additional regulatory mandates and other measures designed to constrain medical costs. The PPACA significantly impacts the medical device industry. Among other things, the PPACA:

In addition, other legislative changes have been proposed and adopted since the PPACA was enacted. For example, on January 2, 2013, former President Obama signed into law the American Taxpayer Relief Act of 2012, or the ATRA, which, among other things, further reduced Medicare payments to several providers, including hospitals, imaging centers and cancer treatment centers and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. Moreover, certain legislative changes to and regulatory changes under the PPACA have occurred in the 115th United States Congress and under the Trump Administration. For example, on December 22, 2017, President Trump signed a budget reconciliation act into law, which among other things, repealed the penalty for individuals who do not maintain minimum essential coverage, which was a central component of PPACA’s approach to expanding coverage. On January 9, 2018, President Trump signed the Bipartisan Budget Act of 2018, which, among other things, repealed the PPACA provision establishing an independent payment advisory board that would have submitted recommendations to reduce Medicare spending if projected Medicare spending exceeded a specified growth rate.

Additional legislative changes to and regulatory changes under the PPACA remain possible. We expect that other state and federal healthcare reform measures will be adopted in the future, any of which could reduce the number of patients with coverage or limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for our products or additional pricing pressure.

Third-Party Reimbursement

Because we and our customers typically receive payment directly from hospitals and surgical centers, we do not anticipate relying directly on payment for any of our products from third-party payors, such as Medicare, Medicaid, private insurers, and managed care companies. However, our business will be affected by policies administered by federal and state healthcare programs, such as Medicare and Medicaid, as well as private third-party payors, which often follow the policies of the state and federal healthcare programs. For example, our business will be indirectly impacted by the ability of a hospital or medical facility to obtain coverage and third-party reimbursement for procedures performed using our products. Many hospitals and clinics in the United States belong to group purchasing organizations (that typically incentivize their hospital members to make a relatively large proportion of purchases from a limited number of vendors of similar products that have contracted to offer discounted prices). Such contracts often include exceptions for purchasing certain innovative new technologies, however. Accordingly, the commercial success of our products may also depend to some extent on our ability to either negotiate favorable purchase contracts with key group purchasing organizations or persuade hospitals and clinics to purchase our product “off contract.” These third-party payors may deny reimbursement if they determine that a device used in a procedure was not medically necessary; was not used in accordance with cost-effective treatment methods, as determined by the third-party payor; or was used for an unapproved use. A national or local coverage decision denying Medicare coverage for one or more of our products could result in private insurers and other third party payors also denying coverage. Even if favorable coverage and reimbursement status is attained for our products, less favorable coverage policies and reimbursement rates may be implemented in the future. The cost containment measures that third-party payors and providers are instituting, both within the United States and abroad, could significantly reduce our potential revenues from the sale of our products and any product candidates. We cannot provide any assurances that we will be able to obtain and maintain third party coverage or adequate reimbursement for our products and product candidates in whole or in part.

For inpatient and outpatient procedures, including those that will involve use of our products, Medicare and many other third-party payors in the United States reimburse hospitals at a prospectively determined amount. This amount is generally based on one or more diagnosis related groups, or DRGs, associated with the patient’s condition for inpatient treatment and generally based on ambulatory payment classifications, or APCs, associated with the procedures performed as an outpatient at an ambulation surgicenter. Each DRG or APC is associated with a level of payment and may be adjusted from time to time, usually annually. Prospective payments are intended to cover most of the non-physician hospital costs incurred in connection with the applicable diagnosis and related procedures. Implant products, such as those we plan to sell, represent part of the total procedure costs while labor, hospital room and board, and other supplies and services represent the balance of those costs. However, the prospective payment amounts are typically set independently of a particular hospital’s actual costs associated with treating a particular patient and implanting a device. Therefore, the payment that a hospital would receive for a particular hospital visit would not typically take into account the cost of our products.

Medicare has established a number of DRGs for inpatient procedures that involve the use of products similar to ours. Although Medicare has authority to create special DRGs for hospital services that more properly reflect the actual costs of expensive or new-technology devices implanted as part of a procedure, it has declined to do so in the past, and we do not expect that it will do so with respect to our current products and product candidates. Medicare’s DRG and APC classifications may have implications outside of Medicare, as many other U.S. third-party payors often use Medicare DRGs and APCs for purposes of determining reimbursement.

We believe that orthopedic implants generally have been well received by third-party payors because of the ability of these implants to greatly reduce long-term healthcare costs for patients with degenerative joint disease. However, coverage and reimbursement policies vary from payor to payor and are subject to change. As discussed above, hospitals that purchase medical devices for treatment of their patients generally rely on third-party payors to reimburse all or part of the costs and fees associated with the procedures performed with these devices. Both government and private third-party coverage and reimbursement levels are critical to new product acceptance. Neither hospitals nor surgeons are likely to use our products if they do not receive reimbursement for the procedures adequate to cover the cost of our products.

While it is expected that hospitals will be able to obtain coverage for procedures using our products, the level of payment available to them for such procedures may change over time. State and federal healthcare programs, such as Medicare and Medicaid, closely regulate provider payment levels and have sought to contain, and sometimes reduce, payment levels. Commercial insurers and managed care plans frequently follow government payment policies and are likewise interested in controlling increases in the cost of medical care. These third-party payors may deny payment if they determine that a procedure was not medically necessary, a device used in a procedure was not used in accordance with cost-effective treatment methods, as determined by the third-party payor, or was used for an unapproved use.

In addition, some payors are adopting pay-for-performance programs that differentiate payments to healthcare providers based on the achievement of documented quality-of-care metrics, cost efficiencies, or patient outcomes. These programs are intended to provide incentives to providers to find ways to deliver the same or better results while consuming fewer resources. As a result of these programs, and related payor efforts to reduce payment levels, hospitals and other providers are seeking ways to reduce their costs, including the amounts they pay to medical device suppliers. Adverse changes in payment rates by payors to hospitals could adversely impact our ability to market and sell our products and negatively affect our financial performance.

In international markets, healthcare payment systems vary significantly by country and many countries have instituted price ceilings on specific product lines. There can be no assurance that our products will be considered cost-effective by third-party payors, that reimbursement will be available or, if available, that the third-party payors’ reimbursement policies will not adversely affect our ability to sell our products profitably.

Member countries of the European Union offer various combinations of centrally financed healthcare systems and private health insurance systems. The relative importance of government and private systems varies from country to country. Governments may influence the price of medical devices through their pricing and reimbursement rules and control of national healthcare systems that fund a large part of the cost of those products to consumers. Some jurisdictions operate positive and negative list systems under which products may be marketed only once a reimbursement price has been agreed upon. Some of these countries may require, as condition of obtaining reimbursement or pricing approval, the completion of clinical trials that compare the cost-effectiveness of a particular product candidate to currently available therapies. Some E.U. member states allow companies to fix their own prices for devices but monitor and control company profits. The choice of devices is subject to constraints imposed by the availability of funds within the purchasing institution. Medical devices are most commonly sold to hospitals or healthcare facilities at a price set by negotiation between the buyer and the seller. A contract to purchase products may result from an individual initiative or as a result of a competitive bidding process. In either case, the purchaser pays the supplier, and payment terms vary widely throughout the European Union. Failure to obtain favorable negotiated prices with hospitals or healthcare facilities could adversely affect sales of our products.

Employees

As of March 1, 2020, we had 28 employees. We believe that our success will depend, in part, on our ability to attract and retain qualified personnel. We have never experienced a work stoppage due to labor difficulties and believe that our relations with our employees are good. None of our employees are represented by labor unions.

In addition to the other information contained in this Annual Report, the following risk factors should be considered carefully in evaluating our company. Our business, financial condition, liquidity or results of operations could be materially adversely affected by any of these risks.

Risks Related to Our Business and Strategy

A pandemic, epidemic or outbreak of an infectious disease in the United States or elsewhere may adversely affect our business.

If a pandemic, epidemic or outbreak of an infectious disease occurs in the United States or elsewhere, our business may be adversely affected. In December 2019, a novel strain of coronavirus, COVID-19, was identified in Wuhan, China. This virus continues to spread globally and, as of March 2020, has spread to over 100 countries, including the United States. The spread of COVID-19 from China to other countries has resulted in the World Health Organization declaring the outbreak of COVID-19 as a “pandemic,” or a worldwide spread of a new disease, on March 11, 2020. We are still assessing the effect on our business, from the spread of COVID-19 and the actions implemented by the governments across the globe. A significant outbreak of contagious diseases, such as COVID-19, could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn. As a result, our ability to raise additional funds, if necessary, may be adversely impacted by risks, or the public perception of the risks, related to the recent outbreak of COVID-19. Furthermore, the third parties we engage, or seek to engage, with respect to OEM manufacturing relationships, and, for supply and development activities, may be adversely impacted by risks, or the public perception of the risks, related to the recent outbreak of COVID-19, which may delay OEM relationships, and, product development opportunities, and increase our costs.

We have incurred net losses since our inception and anticipate that we will continue to incur substantial net losses for the foreseeable future. We may never achieve or sustain profitability.

We have incurred substantial net losses since our inception. For the years ended December 31, 2019 and 2018 we incurred a net loss of $4.8 million and $8.7 million, respectively, and used cash in operations of $6.4 million and $9.3 million, respectively. We have an accumulated deficit of $234.1 million as of December 31, 2019. Our losses have resulted principally from costs incurred in connection with our sales and marketing activities, research and development activities, manufacturing activities, general and administrative expenses associated with our operations, impairments on intangible assets and property and equipment, interest expense, loss on extinguishment of debt and offering costs. Even if we are successful in launching new products into the market, we expect to continue to incur substantial losses for the foreseeable future as we continue to manufacture products for CTL Medical and other OEM customers and research and develop and seek regulatory approvals for our product candidates.

If sales revenue from any of our products or product candidates that receive marketing clearance from the FDA or other regulatory body is insufficient, if we are unable to develop and commercialize any of our product candidates, or if our product development is delayed, we may never become profitable. Even if we do become profitable, we may be unable to sustain or increase our profitability on a quarterly or annual basis.

Our success depends on our ability to successfully commercialize silicon nitride-based products for medical and industrial applications, which to date have experienced only limited market acceptance.

We believe we are the first and only company to use silicon nitride in medical applications. To date, however, we have had limited acceptance of our silicon nitride-based products and prior to the disposition of our spine implant business to CTL Medica, our product revenue was derived substantially from our non-silicon nitride products. In order to succeed in our goal of becoming a leading biomaterial technology company utilizing silicon nitride, we must increase market awareness of our silicon nitride interbody spinal fusion products in conjunction with CTL Medical, continue to develop our other product candidates outside of spinal fusion applications, enhance our commercial infrastructure and commercialize our silicon nitride joint replacement components and other products. If we fail in any of these endeavors or experience delays in pursuing them, we will not generate revenues as planned and will need to curtail operations or seek additional financing earlier than otherwise anticipated.

Our current products and our future products may not be accepted by hospitals and surgeons and may not become commercially successful.

With the sale of our spine business to CTL Medical we are now dependent on the efforts of CTL Medical to sell the spinal fusion products that we manufacture and then sell to CTL Medical. If CTL Medical is not able to sell such products or is unable to increase demand for such products, then our revenues will substantially decline. Since obtaining regulatory clearance from the FDA for our first silicon nitride spinal fusion products in 2008, we have not been able to obtain significant market share of the interbody spinal fusion market, and CTL Medical may not obtain such market share in the future. Even if we receive regulatory clearances or approvals for our other product candidates in development, these product candidates may not gain market acceptance among orthopedic surgeons and the medical community.

If surgeons do not perceive silicon nitride products and product candidates as superior alternatives to competing products, we will not be able to generate significant revenues, if any.

Even if surgeons are convinced of the superior characteristics of our silicon nitride products and our product candidates that we successfully introduce compared to the limitations of the current commonly used biomaterials, surgeons may find other methods or turn to other biomaterials besides silicon nitride to overcome such limitations. For instance, with respect to interbody spinal fusion products, surgeons or device manufacturers may use more effective markers for enhancing the imaging compatibility of PEEK devices, more effective antibiotics to prevent or treat implant-related infections, and more effective osteoconductive and osteoinductive materials when implanting an interbody spinal fusion device. Device manufacturers may also coat metal with existing traditional ceramics to reduce the risk of metal wear particles and corrosion in total joint replacement implants. Additionally, surgeons may increase their use of metal interbody spinal fusion devices if there is an increasing perception that PEEK devices are limited by their strength and resistance to fracture.

The orthopedic market is highly competitive, and we may not be able to compete effectively against the larger, well-established companies that dominate this market or emerging and small innovative companies that may seek to obtain or increase their share of the market.

The markets for spinal fusions and total hip and knee implant products are intensely competitive, and many of our competitors are much larger and have substantially more financial and human resources than we do. Many have long histories and strong reputations within the industry, and a relatively small number of companies dominate these markets. Medtronic, Inc.; DePuy Synthes Companies, a group of Johnson & Johnson companies; Stryker Corporation; Zimmer-Biomet, Inc.; Zimmer Holdings, Inc.; and Smith & Nephew plc, account for a significant amount of orthopedic sales worldwide.

These companies enjoy significant competitive advantages over us, including:

Our products and any product candidates that we may introduce into the market may not enable us to overcome the competitive advantages of these large and dominant orthopedic companies. In addition, even if we successfully introduce additional product candidates incorporating our silicon nitride biomaterial into the market, emerging and small innovative companies may seek to increase their market share and they may eventually possess competitive advantages, which could adversely impact our business. Our competitors may also employ pricing strategies that could adversely affect the pricing of our products and pricing in the spinal fusion and total joint replacement market generally.

Moreover, many other companies are seeking to develop new biomaterials and products which may compete effectively against our products in terms of performance and price. For example, Smith & Nephew has developed a ceramic-coated metal, known as Oxinium, which may overcome certain of the limitations of metal joint replacement products and could directly compete with our silicon nitride and silicon nitride-coated product candidates.

We are dependent on CTL Medical’s ability to sell the spinal fusion products we manufacture from silicon nitride. If CTL Medical is not able to sell such products or increase demand for the products our revenues will be substantially impacted which would have a significant impact on our business and operating results.

Sales of spinal fusion products manufactured from silicon nitride to CTL Medical account for all our revenues from the sale of products. We have entered into a 10-year manufacturing and supply agreement with CTL Medical to supply CTL Medical with its requirements of silicon nitride manufactured spinal fusion products. CTL Medical is not under any obligation to purchase any minimum quantities of products from us. If CTL Medical is not successful in creating demand for such products and selling such products, then they are not required to purchase any products from us. Because of our significant customer concentration, our revenue could fluctuate significantly due to changes in economic conditions, the use of competitive products, or the loss of, reduction of business with, CTL Medical. A reduction or delay in orders from CTL Medical, or a delay or default in payment by any significant customer, could materially harm our business and results of operations.

The manufacturing process for our silicon nitride products is complex and requires sophisticated state-of-the-art equipment, experienced manufacturing personnel and highly specialized knowledge. If we are unable to manufacture our silicon nitride products on a timely basis consistent with our quality standards, our results of operation will be adversely impacted.

In order to control the quality, cost and availability of our silicon nitride products, we developed our own manufacturing capabilities. We operate a 30,000 square foot facility which is certified under the ISO 13485 medical device manufacturing standard for medical devices and operates under the FDA’s quality systems regulations, or QSRs. All operations with the exception of raw material production are performed at this facility.

We are the sole manufacturer of our silicon-nitride based products. Our reliance solely on our internal resources to manufacture our silicon nitride products entails risks to which we would not be subject if we had secondary suppliers for their manufacture, including:

Any of these events could lead to a reduction in our product sales, product launch delays, failure to obtain regulatory clearance or approval or impact our ability to successfully sell our products and commercialize our products candidates.

We depend on a limited number of third-party suppliers for key raw materials used in the manufacturing of our silicon nitride products, and the loss of these third-party suppliers or their inability to supply us with adequate raw materials could harm our business.

We rely on a limited number of third-party suppliers for the raw materials required for the production of our silicon nitride products and product candidates. Our dependence on a limited number of third-party suppliers involves several risks, including limited control over pricing, availability, quality, and delivery schedules for raw materials. We have no supply agreements in place with any of our suppliers and cannot be certain that our current suppliers will continue to provide us with the quantities of raw materials that we require or that satisfy our anticipated specifications and quality requirements. Any supply interruption in limited or single sourced raw materials could materially harm our ability to manufacture our products until a new source of supply, if any, could be identified and qualified. We may be unable to find a sufficient alternative supply channel within a reasonable time or on commercially reasonable terms. Any performance failure on the part of our suppliers could delay the production of our silicon nitride products and product candidates and delay the development and commercialization of our product candidates, including limiting supplies necessary for commercial sale, clinical trials and regulatory approvals, which could have a material adverse effect on our business.

In order to be successful, we must expand our available product lines by commercializing new silicon nitride-based medical device product candidates and identify other non-medical uses of silicon-nitride, but we may not be able to do so in a timely fashion and at expected costs, or at all.

Although we are currently manufacturing silicon nitride interbody spinal fusion implants for CTL Medical, in order to be successful, we will need to expand our product lines to include other silicon nitride devices and products for both medical and non-medical applications. Therefore, we are developing silicon nitride product candidates for total hip and knee replacement procedures, dental implants and are exploring the application of our silicon nitride technology for other potential applications. To succeed in our commercialization efforts, we must effectively continue product development and testing, find new strategic partners, obtain regulatory clearances and approvals, and enhance our sales and marketing capabilities. Because of these uncertainties, there is no assurance that we will succeed in bringing any of our current or future product candidates to market. If we fail in bringing our product candidates to market, or experience delays in doing so, we will not generate revenues as planned and will need to curtail operations or seek additional financing earlier than otherwise anticipated.

We will depend on one or more strategic partners to develop and commercialize our total joint replacement and dental implant product candidates, and if our strategic partners are unable to execute effectively on our agreements with them, we may never become profitable.

We are seeking a strategic partner to develop and commercialize our total joint replacement and dental implant product candidates. We will be reliant on our strategic partners to develop and commercialize a total hip or knee joint replacement product candidate that utilizes silicon nitride-coated components, although we have not yet entered into an agreement with any strategic partner to develop products with these silicon nitride-coated components and may be unable to do so on agreeable terms. In order to succeed in our joint commercialization efforts, we and any future partners must execute effectively on all elements of a combined business plan, including continuing to establish sales and marketing capabilities, manage certified, validated and effective commercial-scale manufacturing operations, conduct product development and testing, and obtain regulatory clearances and approvals for our product candidate. If we or any of our strategic partners fail in any of these endeavors, or experience delays in pursuing them, we will not generate revenues as planned and will need to curtail operations or seek additional financing earlier than otherwise anticipated.

Part of our strategy is to establish and develop OEM partnerships and arrangements, which subjects us to various risks.

Because we believe silicon nitride is a superior platform and technology for application in the spine, total joint and other markets and industrial applications, we are establishing OEM partnerships with other companies to replace their materials and products with silicon nitride. Sales of products to OEM customers will expose our business to a number of risks. Sales through OEM partners could be less profitable than direct sales. Sales of our products through multiple channels could also confuse customers and cause the sale of our products to decline. In addition, OEM customers will require that products meet strict standards. Our compliance with these requirements could result in increased development, manufacturing, warranty and administrative costs. A significant increase in these costs could adversely affect our operating results. If we fail to meet OEM specifications on a timely basis, our relationships with our OEM partners may be harmed. Furthermore, we would not control our OEM partners, and they could sell competing products, may not incorporate our technology into their products in a timely manner and may devote insufficient sales efforts to the OEM products.

If hospitals and other healthcare providers are unable to obtain coverage or adequate reimbursement for procedures performed with our products, it is unlikely our products will be widely used.

In the United States, the commercial success of our products will depend, in part, on the extent to which governmental payers at the federal and state levels, including Medicare and Medicaid, private health insurers and other third-party payers provide coverage for and establish adequate reimbursement levels for procedures utilizing our products. Because we typically receive payment directly from the companies for whom we manufacture, such as CTL Medical, we do not anticipate relying directly on payment from third-party payers for our products. However, hospitals and other healthcare providers that purchase orthopedic products manufactured by us from our customers for treatment of their patients generally rely on third-party payers to pay for all or part of the costs and fees associated with our products as part of a “bundled” rate for the associated procedures. The existence of coverage and adequate reimbursement for our products and the procedures performed with them by government and private payers is critical to market acceptance of our existing and future products. Neither hospitals nor surgeons are likely to use our products if they do not receive adequate reimbursement for the procedures utilizing our products.

Many private payers currently base their reimbursement policies on the coverage decisions and payment amounts determined by the Centers for Medicare and Medicaid Services, or CMS, which administers the Medicare program. Others may adopt different coverage or reimbursement policies for procedures performed with our products, while some governmental programs, such as Medicaid, have reimbursement policies that vary from state to state, some of which may not pay for the procedures performed with our products in an adequate amount, if at all. A Medicare national or local coverage decision denying coverage for one or more of our products could result in private and other third-party payers also denying coverage for our products. Third-party payers also may deny reimbursement for our products if they determine that a product used in a procedure was not medically necessary, was not used in accordance with cost-effective treatment methods, as determined by the third-party payer, or was used for an unapproved use. Unfavorable coverage or reimbursement decisions by government programs or private payers underscore the uncertainty that our products face in the market and could have a material adverse effect on our business.

Many hospitals and clinics in the United States belong to group purchasing organizations, which typically incentivize their hospital members to make a relatively large proportion of purchases from a limited number of vendors of similar products that have contracted to offer discounted prices. Such contracts often include exceptions for purchasing certain innovative new technologies, however. Accordingly, the commercial success of our products may also depend to some extent on our ability to either negotiate favorable purchase contracts with key group purchasing organizations and/or persuade hospitals and clinics to purchase our product “off contract.”

The healthcare industry in the United States has experienced a trend toward cost containment as government and private payers seek to control healthcare costs by paying service providers lower rates. While it is expected that hospitals will be able to obtain coverage for procedures using our products, the level of payment available to them for such procedures may change over time. State and federal healthcare programs, such as Medicare and Medicaid, closely regulate provider payment levels and have sought to contain, and sometimes reduce, payment levels. Private payers frequently follow government payment policies and are likewise interested in controlling increases in the cost of medical care. In addition, some payers are adopting pay-for-performance programs that differentiate payments to healthcare providers based on the achievement of documented quality-of-care metrics, cost efficiencies, or patient outcomes. These programs are intended to provide incentives to providers to deliver the same or better results while consuming fewer resources. As a result of these programs, and related payer efforts to reduce payment levels, hospitals and other providers are seeking ways to reduce their costs, including the amounts they pay to medical device manufacturers. We may not be able to sell our implants profitably if third-party payers deny or discontinue coverage or reduce their levels of payment below that which we project, or if our production costs increase at a greater rate than payment levels. Adverse changes in payment rates by payers to hospitals could adversely impact our ability to market and sell our products and negatively affect our financial performance.

In international markets, medical device regulatory requirements and healthcare payment systems vary significantly from country to country, and many countries have instituted price ceilings on specific product lines. We cannot assure you that our products will be considered cost-effective by international third-party payers, that reimbursement will be available or, if available, that the third-party payers’ reimbursement policies will not adversely affect our ability to sell our products profitably. Any failure to receive regulatory or reimbursement approvals would negatively impact market acceptance of our products in any international markets in which those approvals are sought.

Moreover, certain legislative changes to and regulatory changes under the PPACA have occurred in the 115th United States Congress and under the Trump Administration. For example, on December 22, 2017, President Trump signed a budget reconciliation act into law, which among other things, repealed the penalty for individuals who do not maintain minimum essential coverage, which was a central component of PPACA’s approach to expanding coverage. On January 9, 2018, President Trump signed the Bipartisan Budget Act of 2018, which, among other things, repealed the PPACA provision establishing an independent payment advisory board that would have submitted recommendations to reduce Medicare spending if projected Medicare spending exceeded a specified growth rate we cannot predict the ultimate content, timing or effect of any changes to the Health Care Reform Act or other federal and state reform efforts. There is no assurance that federal or state healthcare reform will not adversely affect our business and financial results, and we cannot predict how future federal or state legislative, judicial or administrative changes relating to healthcare reform will affect our business.

Prolonged negative economic conditions in domestic and international markets may adversely affect us, our suppliers, partners and consumers, and the global orthopedic market which could harm our financial position.

There is a risk that one or more of our current suppliers may not continue to operate. Any lender that is obligated to provide funding to us under any future credit agreement with us may not be able to provide funding in a timely manner, or at all, when we require it. The cost of, or lack of, available credit or equity financing could impact our ability to develop sufficient liquidity to maintain or grow our company. These negative changes in domestic and international economic conditions or additional disruptions of either or both of the financial and credit markets may also affect third-party payers and may have a material adverse effect on our business, results of operations, financial condition and liquidity.

In addition, we believe that various demographics and industry-specific trends will help drive growth in the orthopedics markets, but these demographics and trends are uncertain. Actual demand for orthopedic products generally, and our products in particular, could be significantly less than expected if our assumptions regarding these factors prove to be incorrect or do not materialize, or if alternative treatments gain widespread acceptance.

We are dependent on our senior management team, engineering team, and external advisors, and the loss of any of them could harm our business. We may not have sufficient personnel to effectuate our business strategy due to our recent reduction in force.

The members of our current senior management team have worked together in their new positions with us for a limited time and may not be able to successfully implement our strategy. In addition, we have not entered into employment agreements, other than change-in-control severance agreements, with any of the members of our senior management team. There are no assurances that the services of any of these individuals will be available to us for any specified period of time. The successful integration of our senior management team, the loss of members of our senior management team, engineering team and key external advisors, or our inability to attract or retain other qualified personnel or advisors could have a material adverse effect on our business, financial condition and results of operations. We may not have sufficient number of qualified personnel to effectuate our business strategy which could have a material adverse effect on our business, financial condition and results of operations.

If we experience significant disruptions in our information technology systems, our business, results of operations and financial condition could be adversely affected.

The efficient operation of our business depends on our information technology systems. We rely on our information technology systems to effectively manage our sales and marketing, accounting and financial functions; manufacturing processes; inventory; engineering and product development functions; and our research and development functions. As such, our information technology systems are vulnerable to damage or interruption including from earthquakes, fires, floods and other natural disasters; terrorist attacks and attacks by computer viruses or hackers; power losses; and computer systems, or Internet, telecommunications or data network failures. The failure of our information technology systems to perform as we anticipate or our failure to effectively implement new systems could disrupt our entire operation and could result in decreased sales, increased overhead costs, excess inventory and product shortages, all of which could have a material adverse effect on our reputation, business, results of operations and financial condition.

Cyber security risks and the failure to maintain the integrity of company, employee or guest data could expose us to data loss, litigation and liability, and our reputation could be significantly harmed. 

We collect and third parties collaborating on our clinical trials collect and retain large volumes of data, including personally identifiable information regarding clinical trial participants and others, for business purposes, including for regulatory, research and development and commercialization purposes, and our collaborators’ various information technology systems enter, process, summarize and report such data. We also maintain personally identifiable information about our employees. The integrity and protection of our company, employee and clinical data is critical to our business. We are subject to significant security and privacy regulations, as well as requirements imposed by government regulation. Maintaining compliance with these evolving regulations and requirements could be difficult and may increase our expenses. In addition, a penetrated or compromised data system or the intentional, inadvertent or negligent release or disclosure of data could result in theft, loss or fraudulent or unlawful use of company, employee or clinical data which could harm our reputation, disrupt our operations, or result in remedial and other costs, fines or lawsuits.

Risks Related to Our Capital Resources and Impairments

We will require additional financing and our failure to obtain additional funding would force us to delay, reduce or eliminate our product development programs or commercialization efforts.

We currently have limited committed sources of capital and we have limited liquidity. Our cash and cash equivalents as of December 31, 2019 was $1.8 million. We require substantial future capital in order to continue to conduct the research and development and regulatory clearance and approval activities necessary to bring our products to market, to establish effective marketing and sales capabilities. Our existing capital resources are not sufficient to enable us to fund the completion of the development and commercialization of all of our product candidates. We cannot determine with certainty the duration and completion costs of the current or future development and commercialization of our product candidates for spinal fusion, joint replacement and coated metals or if, when, or to what extent we will generate revenues from the commercialization and sale of any of these product candidates for which we obtain regulatory approval. We may never succeed in achieving regulatory approval for certain or all of these product candidates. The duration, costs and timing of clinical trials and development of our spinal fusion, joint replacement and coated metal product candidates will depend on a variety of factors, including:

A change in the outcome of any of these variables with respect to the development of spinal fusion, joint replacement or coated metal product candidates could mean a significant change in the costs and timing associated with the development of these product candidates.

In addition, if adequate funds to develop our product candidates are not available on a timely basis, we may terminate or delay the development of one or more of our product candidates, or delay activities necessary to commercialize our product candidates. Additional funding may not be available to us on acceptable terms, or at all. Any additional equity financing, if available, may not be available on favorable terms and will most likely be dilutive to our current stockholders, and debt financing, if available, may involve more restrictive covenants. Our ability to access capital when needed is not assured and, if not achieved on a timely basis, will materially harm our business, financial condition and results of operations or could cause us to cease operations.

The timing and amount of our future capital requirements will depend on many factors, including:

Raising additional capital by issuing securities or through debt financings or licensing arrangements may cause dilution to existing stockholders, restrict our operations or require us to relinquish proprietary rights.

To the extent that we raise additional capital through the sale of equity or convertible debt securities, your ownership interest may be diluted, and the terms may include liquidation or other preferences that adversely affect your rights as a stockholder. Debt financing, if available, may involve agreements that include covenants limiting or restricting our ability to take specific actions such as incurring additional debt, making capital expenditures or declaring dividends. If we raise additional funds through collaboration and licensing arrangements with third parties, we may have to relinquish valuable rights to our technologies or products or grant licenses on terms that are not favorable to us. Any of these events could adversely affect our ability to achieve our product development and commercialization goals and have a material adverse effect on our business, financial condition and results of operations.

In previous years we have indicated that there was substantial doubt as to our ability to continue as a going concern. Depending on the results of our future operations, we may again have substantial doubt as to our ability to continue as a going concern.

If we seek additional financing to fund our business activities, investors or other financing sources may be unwilling to provide additional funding on commercially reasonable terms or at all. If we seek additional funds and are unable to obtain sufficient additional funding, our business, prospects, financial condition and results of operations will be materially and adversely affected, and we may be unable to continue as a going concern. If we are unable to continue as a going concern, we may have to liquidate our assets and may receive less than the value at which those assets are carried on our consolidated financial statements, and it is likely that investors will lose all or a part of their investment. Our future reports may disclose our doubt about our ability to continue as a going concern.

Risks Related to Regulatory Approval of Our Products and Other Government Regulations

Our long-term success depends substantially on our ability to obtain regulatory clearance or approval and thereafter commercialize our product candidates; we cannot be certain that we will be able to do so in a timely manner or at all.

The process of obtaining regulatory clearances or approvals to market a medical device from the FDA or similar regulatory authorities outside of the United States can be costly and time consuming, and there can be no assurance that such clearances or approvals will be granted on a timely basis, or at all. The FDA’s 510(k) clearance process generally takes one to six months from the date of submission, depending on whether a special or traditional 510(k) premarket notification has been submitted, but can take significantly longer. An application for premarket approval, or PMA, must be submitted to the FDA if the device cannot be cleared through the 510(k) clearance process or is not exempt from premarket review by the FDA. The PMA process almost always requires one or more clinical trials and can take two to three years from the date of filing, or even longer. In some cases, including in the case of our interbody spinal fusion devices which incorporate our CSC technology and our solid silicon nitride femoral head component, the FDA requires clinical data as part of the 510(k) clearance process.

It is possible that the FDA could raise questions about spinal fusion products, spinal fusion product candidates, dental implant products, and our total hip and knee joint replacement product candidates and could require us to perform additional studies on our products and product candidates. Even if the FDA permits us to use the 510(k) clearance process, we cannot assure you that the FDA will not require either supporting data from laboratory tests or studies that we have not conducted, or substantial supporting clinical data. If we are unable to use the 510(k) clearance process for any of our product candidates, are required to provide clinical data or laboratory data that we do not possess to support our 510(k) premarket notifications for any of these product candidates, or otherwise experience delays in obtaining or fail to obtain regulatory clearances, the commercialization of our product candidates in the United States will be delayed or prevented, which will adversely affect our ability to generate additional revenues. It also may result in the loss of potential competitive advantages that we might otherwise attain by bringing our products to market earlier than our competitors. Additionally, although the FDA allows modifications to be made to devices that have received 510(k) clearance with supporting documentation, the FDA may disagree with our decision to modify our cleared devices without submission of a new 510(k) premarket notification, subjecting us to potential product recall, field alerts and corrective actions. Any of these contingencies could adversely affect our business.

Similar to our compliance with U.S. regulatory requirements, we must obtain and comply with international requirements, in order to market and sell our products outside of the United States and we may only promote and market our products, if approved, as permitted by applicable regulatory authorities. There is no guarantee that we will receive the necessary regulatory approvals for our product candidates either inside the United States or internationally. If our product candidates do not receive necessary regulatory approvals, our business could be materially and adversely affected.

The safety of our products is not yet supported by long-term clinical data, and they may prove to be less safe and effective than our laboratory data indicate.

We obtained FDA clearance for each of our spinal fusion products that we currently manufacture for CTL Medical, and we have sought and intend to seek FDA clearance or approval through the FDA’s 510(k) or PMA process and, where applicable, CE marking for our product candidates. The 510(k) clearance process is based on the FDA’s agreement that a new product candidate is substantially equivalent to an already marketed product for which a PMA was not required. While most 510(k) premarket notifications do not require clinical data for clearance, the FDA may request that such data be provided. Long-term clinical data or marketing experience obtained after clearance may indicate that our products cause unexpected complications or other unforeseen negative effects. If this happens, we could be subject to the withdrawal of our marketing clearance and other enforcement sanctions by the FDA or other regulatory authority, product recalls, significant legal liability, significant negative publicity, damage to our reputation and a dramatic reduction in our ability to sell our products, any one of which would have a material adverse effect on our business, financial condition and results of operations.

We expect to be required to conduct clinical trials to support regulatory approval of some of our product candidates. We have little experience conducting clinical trials, they may proceed more slowly than anticipated, and we cannot be certain that our product candidates will be shown to be safe and effective for human use.

In order to commercialize our product candidates in the United States, we must submit a PMA for some of these product candidates, which will require us to conduct clinical trials. We also plan to provide the FDA with clinical trial data to support some of our 510(k) premarket notifications. We will receive approval or clearance from the FDA to commercialize products requiring a clinical trial only if we can demonstrate to the satisfaction of the FDA, through well-designed and properly conducted clinical trials, that our product candidates are safe and effective and otherwise meet the appropriate standards required for approval or clearance for specified indications.

Clinical trials are complex, expensive, time consuming, uncertain and subject to substantial and unanticipated delays. Before we may begin clinical trials, we must submit and obtain approval for an investigational device exemption, or IDE, that describes, among other things, the manufacture of, and controls for, the device and a complete investigational plan. Clinical trials generally involve a substantial number of patients in a multi-year study. Because we do not have the experience or the infrastructure necessary to conduct clinical trials, we will have to hire one or more contract research organizations, or CROs, to conduct trials on our behalf. CRO contract negotiations may be costly and time consuming and we will rely heavily on the CRO to ensure that our trials are conducted in accordance with regulatory and industry standards. We may encounter problems with our clinical trials and any of those problems could cause us or the FDA to suspend those trials or delay the analysis of the data derived from them.

A number of events or factors, including any of the following, could delay the completion of our clinical trials in the future and negatively impact our ability to obtain FDA approval for, and to introduce our product candidates:

Our clinical trials may need to be redesigned or may not be completed on schedule, if at all. Delays in our clinical trials may result in increased development costs for our product candidates, which could cause our stock price to decline and limit our ability to obtain additional financing. In addition, if one or more of our clinical trials are delayed, competitors may be able to bring products to market before we do, and the commercial viability of our product candidates could be significantly reduced.

Our current and future relationships with third-party payers and current and potential customers in the United States and elsewhere may be subject, directly or indirectly, to applicable anti-kickback, fraud and abuse, false claims, transparency, health information privacy and security and other healthcare laws and regulations, which could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm administrative burdens and diminished profits and future earnings.

Our current and future arrangements with third-party payers and current and potential customers, including providers and physicians, as well as physician owned distributorships or PODs, may expose us to broadly applicable fraud and abuse and other healthcare laws and regulations, including, without limitation, the federal Anti-Kickback Statute and the federal False Claims Act, which may constrain the business or financial arrangements and relationships through which we sell, market and distribute our products. In addition, we may be subject to transparency laws and patient privacy regulations by U.S. federal and state governments and by governments in foreign jurisdictions in which we conduct our business. The applicable federal, state and foreign healthcare laws and regulations that may affect our ability to operate include:

U.S. federal income tax reform could adversely affect us.

On December 22, 2017, President Donald Trump signed into law sweeping tax reform, which overhauls individual, business and international taxes including, but not limited to:

The reduction in tax rate will result in a reduction in the deferred tax assets. We have previously used the 35% federal statutory tax rate to calculate the value of those assets. Also, if we fail to generate significant taxable income, we may not be able to fully deduct the interest expense on our debt, which could result in us having to pay increased federal income taxes. We have also generated substantial taxable losses in the past and may continue to do so in the future. Although the treatment of tax losses generated before December 31, 2018 has not changed, tax losses generated in fiscal 2019 and beyond will only be able to offset 80% of taxable income, although the losses may be carried forward indefinitely. This could cause us to have to pay federal income taxes despite generating a loss for federal income tax purposes in the future. We continue to work with our tax advisors to determine the full impact that the new tax bill will have on our Company.

Recently enacted and future legislation may increase the difficulty and cost for us to obtain and monitor regulatory approval or clearance of our product candidates and affect the prices we may obtain for our products.

In the United States and some foreign jurisdictions, there have been a number of legislative and regulatory changes and proposed changes regarding the healthcare system that could prevent or delay clearance and/or approval of our product candidates, restrict or regulate post-clearance and post-approval activities and affect our ability to profitably sell our products and any product candidates for which we obtain marketing approval or clearance.

In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of our products. Delays in receipt of or failure to receive regulatory clearances or approvals for our new products would have a material adverse effect on our business, results of operations and financial condition. In addition, the FDA is currently evaluating the 510(k) process and may make substantial changes to industry requirements, including which devices are eligible for 510(k) clearance, the ability to rescind previously granted 510(k) clearances and additional requirements that may significantly impact the process.

Among policy makers and payers in the United States and elsewhere, there is significant interest in promoting changes in healthcare systems with the stated goals of containing healthcare costs, improving quality and expanding access. In the United States, the medical device industry has been a particular focus of these efforts and has been significantly affected by major legislative initiatives. In March 2010, President Obama signed into law the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Affordability Reconciliation Act, or collectively the ACA, a sweeping law intended, among other things, to broaden access to health insurance, reduce or constrain the growth of healthcare spending, enhance remedies against fraud and abuse, add new transparency requirements for the healthcare and health insurance industries, impose new taxes and fees on the health industry and impose additional health policy reforms.

Among the provisions of the ACA of importance to our products and product candidates are:

In addition, other legislative changes have been proposed and adopted since the PPACA was enacted. For example, on January 2, 2013, former President Obama signed into law the American Taxpayer Relief Act of 2012, or the ATRA, which, among other things, further reduced Medicare payments to several providers, including hospitals, imaging centers and cancer treatment centers and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. Moreover, certain legislative changes to and regulatory changes under the PPACA have occurred in the 115th United States Congress and under the Trump Administration. For example, on December 22, 2017, President Trump signed a budget reconciliation act into law, which among other things, repealed the penalty for individuals who do not maintain minimum essential coverage, which was a central component of PPACA’s approach to expanding coverage. On January 9, 2018, President Trump signed the Bipartisan Budget Act of 2018, which, among other things, repealed the PPACA provision establishing an independent payment advisory board that would have submitted recommendations to reduce Medicare spending if projected Medicare spending exceeded a specified growth rate.

Additional legislative changes to and regulatory changes under the PPACA remain possible. We expect that other state and federal healthcare reform measures will be adopted in the future, any of which could reduce the number of patients with coverage or limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for our products or additional pricing pressure.

In the European Union and some other international markets, the government provides health care at a low cost to consumers and regulates prices of healthcare products, patient eligibility or reimbursement levels to control costs for the government-sponsored health care system. Many countries are reducing their public expenditures and we expect to see strong efforts to reduce healthcare costs in international markets, including patient access restrictions, suspensions on price increases, prospective and possibly retroactive price reductions and other recoupments and increased mandatory discounts or rebates and recoveries of past price increases. These cost control measures could reduce our revenues. In addition, certain countries set prices by reference to the prices in other countries where our products are marketed. Thus, our inability to secure adequate prices in a particular country may not only limit the marketing of our products within that country but may also adversely affect our ability to obtain acceptable prices in other markets. This may create the opportunity for third-party cross border trade or influence our decision to sell or not to sell a product, thus adversely affecting our geographic expansion plans and revenues.

Risks Related to Our Intellectual Property and Litigation

If the combination of patents, trade secrets and contractual provisions that we rely on to protect our intellectual property is inadequate, our ability to commercialize our products successfully will be harmed, and we may not be able to operate our business profitably.

Our success depends significantly on our ability to protect our proprietary rights to the technologies incorporated in our products. We rely on a combination of patent protection, trade secret laws and nondisclosure, confidentiality and other contractual restrictions to protect our proprietary technology. However, these may not adequately protect our rights or permit us to gain or keep any competitive advantage.

The issuance of a patent is not conclusive as to its scope, validity or enforceability. The scope, validity or enforceability of our issued patents can be challenged in litigation or proceedings before the U.S. Patent and Trademark Office, or the USPTO, or foreign patent offices. In addition, our pending patent applications include claims to numerous important aspects of our products under development that are not currently protected by any of our issued patents. We cannot assure you that any of our pending patent applications will result in the issuance of patents to us. The USPTO or foreign patent offices may deny or require significant narrowing of claims in our pending patent applications. Patents issued as a result of the pending patent applications, if any, may not provide us with significant commercial protection or be issued in a form that is advantageous to us. Proceedings before the USPTO or foreign patent offices could result in adverse decisions as to the priority of our inventions and the narrowing or invalidation of claims in issued patents. The laws of some foreign countries may not protect our intellectual property rights to the same extent as the laws of the United States, if at all.

Our competitors may successfully challenge and invalidate or render unenforceable our issued patents, including any patents that may issue in the future, which could prevent or limit our ability to market our products and could limit our ability to stop competitors from marketing products that are substantially equivalent to ours. In addition, competitors may be able to design around our patents or develop products that provide outcomes that are comparable to our products but that are not covered by our patents.

We have also entered into confidentiality and assignment of intellectual property agreements with all of our employees, consultants and advisors as one of the ways we seek to protect our intellectual property and other proprietary technology. However, these agreements may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements.

In the event a competitor infringes upon any of our patents or other intellectual property rights, enforcing our rights may be difficult, time consuming and expensive, and would divert management’s attention from managing our business. There can be no assurance that we will be successful on the merits in any enforcement effort. In addition, we may not have sufficient resources to litigate, enforce or defend our intellectual property rights.

We have no patent protection covering the composition of matter for our solid silicon nitride or the process we use for manufacturing our solid silicon nitride, and competitors may create silicon nitride formulations substantially similar to ours.

Although we have a number of U.S. and foreign patents and pending applications relating to our solid silicon nitride products or product candidates, we have no patent protection either for the composition of matter for our silicon nitride or for the processes of manufacturing solid silicon nitride. As a result, competitors may create silicon nitride formulations substantially similar to ours and use their formulations in products that may compete with our silicon nitride products, provided they do not violate our issued product patents. Although we have, and will continue to develop, significant know-how related to these processes, there can be no assurance that we will be able to maintain this know-how as trade secrets, and competitors may develop or acquire equally valuable or more valuable know-how related to the manufacture of silicon nitride.

We could become subject to intellectual property litigation that could be costly, result in the diversion of management’s time and efforts, require us to pay damages, prevent us from marketing our commercially available products or product candidates and/or reduce the margins we may realize from our products that we may commercialize.

The medical devices industry is characterized by extensive litigation and administrative proceedings over patent and other intellectual property rights. Whether a product infringes a patent involves complex legal and factual issues, and the determination is often uncertain. There may be existing patents of which we are unaware that our products under development may inadvertently infringe. The likelihood that patent infringement claims may be brought against us increases as the number of participants in the orthopedic market increases and as we achieve more visibility in the marketplace and introduce products to market.

Any infringement claim against us, even if without merit, may cause us to incur substantial costs, and would place a significant strain on our financial resources, divert the attention of management from our core business, and harm our reputation. In some cases, litigation may be threatened or brought by a patent holding company or other adverse patent owner who has no relevant product revenues and against whom our patents may provide little or no deterrence. If we were found to infringe any patents, we could be required to pay substantial damages, including triple damages if an infringement is found to be willful, and royalties and could be prevented from selling our products unless we obtain a license or are able to redesign our products to avoid infringement. We may not be able to obtain a license enabling us to sell our products on reasonable terms, or at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe those patents. If we fail to obtain any required licenses or make any necessary changes to our technologies or the products that incorporate them, we may be unable to commercialize one or more of our products or may have to withdraw products from the market, all of which would have a material adverse effect on our business, financial condition and results of operations.

In addition, in order to further our product development efforts, we have entered into agreements with orthopedic surgeons to help us design and develop new products, and we expect to enter into similar agreements in the future. In certain instances, we have agreed to pay such surgeons royalties on sales of products which incorporate their product development contributions. There can be no assurance that surgeons with whom we have entered into such arrangements will not claim to be entitled to a royalty even if we do not believe that such products were developed by cooperative involvement between us and such surgeons. In addition, some of our surgeon advisors are employed by academic or medical institutions or have agreements with other orthopedic companies pursuant to which they have agreed to assign or are under an obligation to assign to those other companies or institutions their rights in inventions which they conceive or develop or help conceive or develop.

There can be no assurance that one or more of these orthopedic companies or institutions will not claim ownership rights to an invention we develop in collaboration with our surgeon advisors or consultants on the basis that an agreement with such orthopedic company or institution gives it ownership rights in the invention or that our surgeon advisors on consultants otherwise have an obligation to assign such inventions to such company or institution. Any such claim against us, even without merit, may cause us to incur substantial costs, and would place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation.

We may be subject to damages resulting from claims that we have wrongfully used or disclosed alleged trade secrets of our competitors or are in breach of non-competition agreements with our competitors or non-solicitation agreements.

Many of our employees were previously employed at other orthopedic companies, including our competitors and potential competitors. Many of our former distributors and potential distributors sell, or in the past have sold, products of our competitors. We may be subject to claims that either we, or these employees or distributors, have inadvertently or otherwise used or disclosed the trade secrets or other proprietary information of our competitors. In addition, we have been and may in the future be subject to claims that we caused an employee or sales agent to break the terms of his or her non-competition agreement or non-solicitation agreement. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management. If we fail in defending such claims, in addition to paying money damages, we may lose valuable intellectual property rights or personnel. A loss of key personnel or their work product could hamper or prevent our ability to commercialize products, which could have an adverse effect on our business, financial condition and results of operations.

If our silicon nitride products or our product candidates conflict with the rights of others, we may not be able to manufacture or market our products or product candidates, which could have a material and adverse effect on us.

Our commercial success will depend in part on not infringing the patents or violating the other proprietary rights of third parties. Issued patents held by others may limit our ability to develop commercial products. All issued patents are entitled to a presumption of validity under the laws of the United States. If we need suitable licenses to such patents to permit us to develop or market our product candidates, we may be required to pay significant fees or royalties and we cannot be certain that we would even be able to obtain such licenses. Competitors or third parties may obtain patents that may cover subject matter we use in developing the technology required to bring our products to market, that we use in producing our products, or that we use in treating patients with our products. We know that others have filed patent applications in various jurisdictions that relate to several areas in which we are developing products. Some of these patent applications have already resulted in patents and some are still pending. If we were found to infringe any of these issued patents or any of the pending patent applications, when and if issued, we may be required to alter our processes or product candidates, pay licensing fees or cease activities. If use of technology incorporated into or used to produce our product candidates is challenged, or if our processes or product candidates conflict with patent rights of others, third parties could bring legal actions against us, in Europe, the United States and elsewhere, claiming damages and seeking to enjoin manufacturing and marketing of the affected products. Additionally, it is not possible to predict with certainty what patent claims may issue from pending applications. In the United States, for example, patent prosecution can proceed in secret prior to issuance of a patent, provided such application is not filed in foreign jurisdiction. For U.S. patent applications that are also filed in foreign jurisdictions, such patent applications will not publish until 18 months from the filing date of the application. As a result, third parties may be able to obtain patents with claims relating to our product candidates which they could attempt to assert against us. Further, as we develop our products, third parties may assert that we infringe the patents currently held or licensed by them, and we cannot predict the outcome of any such action.

There has been extensive litigation in the medical devices industry over patents and other proprietary rights. If we become involved in any litigation, it could consume a substantial portion of our resources, regardless of the outcome of the litigation. If these legal actions are successful, in addition to any potential liability for damages, we could be required to obtain a license, grant cross-licenses and pay substantial royalties in order to continue to manufacture or market the affected products.

We cannot assure you that we would prevail in any legal action or that any license required under a third-party patent would be made available on acceptable terms, or at all. Ultimately, we could be prevented from commercializing a product, or forced to cease some aspect of our business operations, as a result of claims of patent infringement or violation of other intellectual property rights, which could have a material and adverse effect on our business, financial condition and results of operations.

Risks Related to Potential Litigation from Operating Our Business

We may become subject to potential product liability claims, and we may be required to pay damages that exceed our insurance coverage.

Our business exposes us to potential product liability claims that are inherent in the design, testing, manufacture, sale and distribution of our currently marketed products and each of our product candidates that we are seeking to introduce to the market. The use of orthopedic medical devices can involve significant risks of serious complications, including bleeding, nerve injury, paralysis, infection, and even death. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates or in our inability to secure coverage in the future on commercially reasonable terms, if at all. In addition, if our product liability insurance proves to be inadequate to pay a damage award, we may have to pay the excess of this award out of our cash reserves, which could significantly harm our financial condition. If longer-term patient results and experience indicate that our products or any component of a product causes tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. A product liability claim, even one without merit, could harm our reputation in the industry, lead to significant legal fees, and result in the diversion of management’s attention from managing our business.

Any claims relating to our improper handling, storage or disposal of biological or hazardous materials could be time consuming and costly.

Although we do not believe that the manufacture of our silicon nitride or non-silicon nitride products will involve the use of hazardous materials, it is possible that regulatory authorities may disagree or that changes to our manufacturing processes may result in such use. Our business and facilities and those of our suppliers and future suppliers may therefore be subject to foreign, federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of hazardous materials and waste products. We may incur significant expenses in the future relating to any failure to comply with environmental laws. Any such future expenses or liability could have a significant negative impact on our business, financial condition and results of operations.

Risks Related to Our Common Stock

The price of our common stock is volatile and is likely to continue to fluctuate due to reasons beyond our control.

The volatility of publicly traded company stocks, including shares of our common stock, often do not correlate to the operating performance of the companies represented by such stocks or our operating performance. Some of the factors that may cause the market price of our common stock to fluctuate include:

These and other external factors may cause the market price and demand for our common stock to fluctuate substantially, which may limit or prevent our stockholders from readily selling their shares of common stock and may otherwise negatively affect the liquidity of our common stock. In addition, in the past, when the market price of a stock has been volatile, holders of that stock have sometimes instituted securities class action litigation against the company that issued the stock. If our stockholders brought a lawsuit against us, we could incur substantial costs defending the lawsuit regardless of the merits of the case or the eventual outcome. Such a lawsuit also would divert the time and attention of our management from running our company.

Securities analysts may not continue to provide coverage of our common stock or may issue negative reports, which may have a negative impact on the market price of our common stock.

Since completing our initial public offering of shares of our common stock in February 2014, a limited number of securities analysts have been providing research coverage of our common stock. If securities analysts do not continue to cover our common stock, the lack of research coverage may cause the market price of our common stock to decline. The trading market for our common stock may be affected in part by the research and reports that industry or financial analysts publish about our business. If one or more of the analysts who elect to cover us downgrade our stock, our stock price would likely decline rapidly. If one or more of these analysts cease coverage of us, we could lose visibility in the market, which in turn could cause our stock price to decline. In addition, under the Sarbanes-Oxley Act of 2002, or the Sarbanes-Oxley Act, and a global settlement among the Securities and Exchange Commission, or the SEC, other regulatory agencies and a number of investment banks, which was reached in 2003, many investment banking firms are required to contract with independent financial analysts for their stock research. It may be difficult for a company such as ours, with a smaller market capitalization, to attract independent financial analysts that will cover our common stock. This could have a negative effect on the market price of our stock.

Anti-takeover provisions in our organizational documents and Delaware law may discourage or prevent a change in control, even if an acquisition would be beneficial to our stockholders, which could affect our stock price adversely and prevent attempts by our stockholders to replace or remove our current management.

Our restated certificate of incorporation and restated bylaws contain provisions that could discourage, delay or prevent a merger, acquisition or other change in control of our company or changes in our board of directors that our stockholders might consider favorable, including transactions in which you might receive a premium for your shares. These provisions also could limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. Stockholders who wish to participate in these transactions may not have the opportunity to do so. Furthermore, these provisions could prevent or frustrate attempts by our stockholders to replace or remove management. These provisions:

In addition, we are subject to the provisions of Section 203 of the Delaware General Corporation Law, which may prohibit certain business combinations with stockholders owning 15% or more of our outstanding voting stock. Any delay or prevention of a change in control transaction or changes in our board of directors could cause the market price of our common stock to decline.

We do not intend to pay cash dividends.

We have never declared or paid cash dividends on our capital stock and we do not anticipate paying any cash dividends in the foreseeable future. We currently intend to retain all available funds and any future earnings for debt service and use in the operation and expansion of our business. In addition, the terms of any future debt or credit facility may preclude us from paying any dividends.

Our outstanding shares of Series B Convertible Preferred Stock and Series C Convertible Preferred Stock and our outstanding common stock warrants are convertible and exercisable into shares of our common stock and when converted or exercised, the issuance of additional shares of common stock may result in downward pressure on the trading price of our common shares.

We have outstanding shares of Series B Convertible Preferred Stock and Series C Convertible Preferred Stock that are each convertible into shares of common stock. We believe that as such holders convert their preferred shares into common shares, they will immediately sell their shares of common stock. The sale of such shares of common stock may result in downward pressure on the trading price of our common stock resulting in a lower stock price. Additionally, we have outstanding warrants to purchase shares of common stock. Many of these warrants have a cashless exercise provision that if exercised may also result in downward pressure on the trading price of our common stock and cause such price to decline.

Risks Related to Public Companies

We are a “smaller reporting company” and the reduced disclosure requirements applicable to smaller reporting companies may make our common stock less attractive to investors.

We are currently a “smaller reporting company” as defined in the Securities Exchange Act of 1934. Smaller reporting companies are able to provide simplified executive compensation disclosures in their filings, are exempt from the provisions of Section 404(b) of the Sarbanes-Oxley Act requiring that independent registered public accounting firms provide an attestation report on the effectiveness of internal control over financial reporting, and have certain other decreased disclosure obligations in their SEC filings, including, among other things, only being required to provide two years of audited financial statements in annual reports. We cannot predict whether investors will find our common stock less attractive because of our reliance on any of these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

We could be delisted from Nasdaq, which could seriously harm the liquidity of our stock and our ability to raise capital.

On March 24, 2020, we received a notice from the Nasdaq Listing Qualifications Department (the “Staff”) of the Nasdaq Stock Market LLC (“Nasdaq”) stating that the bid price of the Company’s common stock for the last 30 consecutive trading days had closed below the minimum $1.00 per share required for continued listing under Listing Rule 5550(a)(2). If the Company does not regain compliance with Rule 5550(a)(2) by September 21, 2020, the Company may be afforded a second 180 calendar day period to regain compliance. To qualify, the Company would be required to meet the continued listing requirement for market value of publicly held shares and all other initial listing standards for The Nasdaq Capital Market, except for the minimum bid price requirement. In addition, the Company would be required to notify Nasdaq of its intent to cure the deficiency during the second compliance period, which may include, if necessary, implementing a reverse stock split. There can be no assurance that the Company will be able to regain compliance with Nasdaq requirements or will otherwise be in compliance with other Nasdaq listing criteria.

If we cease to be eligible to trade on the Nasdaq Capital Market:

We incur substantial costs as a result of being a public company and our management expects to devote substantial time to public company compliance programs.

As a public company, we incur significant legal, insurance, accounting and other expenses, including costs associated with public company reporting. We intend to invest resources to comply with evolving laws, regulations and standards, and this investment will result in increased general and administrative expenses and may divert management’s time and attention from product development and commercialization activities. If our efforts to comply with new laws, regulations and standards differ from the activities intended by regulatory or governing bodies due to ambiguities related to practice, regulatory authorities may initiate legal proceedings against us, and our business may be harmed. These laws and regulations could make it more difficult and costlier for us to obtain director and officer liability insurance for our directors and officers, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could also make it more difficult for us to attract and retain qualified executive officers and qualified members of our board of directors, particularly to serve on our audit and compensation committees. In addition, if we are unable to continue to meet the legal, regulatory and other requirements related to being a public company, we may not be able to maintain the listing of our common stock on The NASDAQ Capital Market, which would likely have a material adverse effect on the trading price of our common stock.

Not applicable.

Our 30,000 square foot corporate office and manufacturing facilities are located in Salt Lake City, Utah. We occupy these facilities pursuant to a lease that expires in December 2024. Pursuant to the terms of the lease agreement, we may extend the lease for two additional periods of five years each. We believe that our existing facilities are adequate for our current and projected needs for the foreseeable future.

We are currently not a party to any material legal proceedings. However, our industry is characterized by frequent claims and litigation, including claims regarding intellectual property and product liability. As a result, we may be subject to various legal proceedings in the future.

This item does not apply to our business.

PART II

Market Information

Our shares of common stock are currently quoted on The NASDAQ Capital Market under the symbol “SINT”.

The following table sets forth the high and low sale prices of our common stock, as reported by NASDAQ Capital Markets for the periods indicated:

Prices listed are adjusted to reflect both the January 25, 2016 reverse stock split, the November 10, 2017 reverse stock split and the July 26, 2019 reverse stock split.

Holders of Record

As of March 19, 2020, we had approximately 158 holders of record of our common stock. Because many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, this number is not indicative of the total number of stockholders represented by these stockholders of record.

Dividends

We have not declared or paid dividends to stockholders since inception and do not plan to pay cash dividends in the foreseeable future. We currently intend to retain earnings, if any, to finance our growth.

Issuer Purchases of Equity Securities

None

Not applicable.

You should read the following discussion and analysis of our financial condition and results of operations together with our consolidated financial statements and related notes appearing elsewhere in this Annual Report. This discussion and analysis contain forward-looking statements based upon current beliefs, plans, expectations, intentions and projections that involve risks, uncertainties and assumptions, such as statements regarding our plans, objectives, expectations, intentions and projections. Our actual results and the timing of selected events could differ materially from those anticipated in these forward-looking statements as a result of several factors, including those set forth under “Risk Factors” and elsewhere in this Annual Report.

Overview

We are an advanced materials company that develops and commercializes silicon nitride for medical and non-medical applications. The core strength of SINTX Technologies is the manufacturing, research, and development of silicon nitride ceramics for external partners. We believe that silicon nitride has a superb combination of properties that make it ideally suited for long-term human implantation. Other biomaterials are based on bone grafts, metal alloys, and polymers, all of which have well-known practical limitations and disadvantages. In contrast, silicon nitride has a legacy of success in the most demanding and extreme industrial environments. As a human implant material, silicon nitride offers bone ingrowth, resistance to bacterial and viral infection, ease of diagnostic imaging, resistance to corrosion, and superior strength and fracture resistance, among other advantages, all of which claims are validated in our large and growing inventory of peer-reviewed, published literature reports. We believe that our versatile silicon nitride manufacturing expertise positions us favorably to introduce new and innovative devices in the medical and non-medical fields.

We also believe that we are the first and only company to commercialize silicon nitride medical implants. Prior to October 1, 2018, we designed, manufactured and commercialized silicon nitride products for our own behalf in the spine implant market. Over 35,000 of our spinal implants manufactured with silicon nitride have been implanted into patients, with an excellent safety record. On October 1, 2018, we sold our spine implant business to CTL Medical and now manufacture spine implants made with silicon nitride for CTL Medical. Prior to selling our spine implant business to CTL Medical, we had received 510(k) regulatory clearance in the United States, a CE mark in Europe, ANVISA approval in Brazil, and ARTG and Prostheses approvals in Australia for a number of silicon nitride spine implant products designed for spinal fusion surgery. Spine implant products manufactured by us from silicon nitride are currently marketed and sold by CTL Medical under the Valeo® brand to surgeons and hospitals in the United States and to selected markets in Europe and South America. These implants are designed for use in cervical (neck) and thoracolumbar (lower back) spine surgery. We are collaborating with CTL Medical to establish commercial partners in other parts of the world and also working with other partners to obtain regulatory approval for silicon nitride implants in Japan.

The sale of our spine implant business to CTL Medical enables us to now focus on our core competencies. These include research and development of silicon nitride and the design and manufacture of medical and nonmedical products manufactured from silicon nitride and other ceramic materials for our own account and in collaboration with other medical device manufacturers. We are targeting original equipment manufacturer (“OEM”) – including CTL Medical - and private label partnerships in order to accelerate adoption of silicon nitride in future markets such as coating products with silicon nitride, hip and knee replacements, dental and maxillofacial implants, extremities, trauma, bearings, automotive and aerospace components, and cutting tools. Existing biomaterials, based on plastics, metals, and bone grafts have well-recognized limitations that we believe are addressed by silicon nitride.

We believe that silicon nitride addresses many of the biomaterial-related limitations in medical related fields such as hip and knee replacements, dental and maxillofacial implants, sports medicine, extremities, and trauma surgery. We further believe that the inherent material properties of silicon nitride, and the ability to formulate the material in a variety of compositions, combined with precise control of the surface properties of the material, opens up a number of commercial opportunities across orthopedic surgery, neurological surgery, maxillofacial surgery, other medical disciplines, as well as commodity items such as industrial fasteners, bushings, and valves to addressing more complex demands of hypersonic missile radomes, aerospace, air-conditioning systems, beverage dispensers, touch-screen glass, and agribusiness fungicides.

Components of our Results of Operations

We manage our business within one reportable segment, which is consistent with how our management reviews our business, makes investment and resource allocation decisions and assesses operating performance.

Product Revenue

We derive our product revenue primarily from the manufacture and sale of spinal fusion products used in the treatment of spine disorders to CTL Medical, with whom we entered into a 10-year exclusive sales agreement in October 2018. We are currently pursuing other sales opportunities for silicon nitride products outside the spinal fusion application. We generally recognize revenue from sales where control transfers at a point in time as the title and risk of loss passes to the customer, which is at the time the product is shipped. In general, our customer does not have rights of return or exchange.

We believe our product revenue will increase as CTL Medical increases sales of silicon nitride spinal fusion products, as we secure other opportunities to manufacture third party products with silicon nitride, and as we continue to introduce new products into the market.

Cost of Revenue

The expenses that are included in cost of revenue include all in-house manufacturing costs for the products we manufacture.

Gross Profit

Our gross profit measures our product revenue relative to our cost of revenue. We expect our gross profit percentage to decrease as we expand the penetration of our silicon nitride technology platform through OEM and private label partnerships, which offer additional avenues for the adoption of silicon nitride. Prior to the sale of our retail spine business, our revenues and gross profits were based on our retail sales. With the focus on OEM and private label partnerships, the margins are lower, thus causing the decrease in our gross profit percentage.

Research and Development Expenses

Our research and development costs are expensed as incurred. Research and development costs consist of engineering, product development, clinical trials, test-part manufacturing, testing, developing and validating the manufacturing process, manufacturing, facility and regulatory-related costs. Research and development expenses also include employee compensation, employee and non-employee stock-based compensation, supplies and materials, consultant services, and travel and facilities expenses related to research and development activities.

We expect to incur additional research and development costs as we continue to develop new spinal fusion products, product candidates for total joint replacements, dental applications, and other products which may increase our total research and development expenses.

General and Administrative Expenses

General and administrative expenses consist primarily of salaries, benefits and other related costs, including stock-based compensation for certain members of our executive team and other personnel employed in finance, compliance, administrative, information technology, customer service, executive and human resource departments. General and administrative expenses also include other expenses not part of the other cost categories mentioned above, including facility expenses and professional fees for accounting and legal services.

Results of Operations

Year Ended December 31, 2019 Compared to the Year Ended December 31, 2018

The following table sets forth, for the periods indicated, our results of operations for the years ended December 31, 2019 and 2018 (in thousands):

Product Revenue

Total silicon nitride revenue was $0.7 million in 2019 as compared to $0.1 million in 2018, an increase of $0.6 million or 625%. This increase was primarily due to the sale of the retail spine business in October 2018, the restatement of 2018 revenues to $0.1 million as a result of the discontinued retail spine operations and the subsequent sale of only silicon nitride products during the fourth quarter of 2018. In addition, sales increased as a result of increased sales and marketing efforts from CTL Medical.

Costs of Revenue and Gross Profit

The Company’s cost of revenue increased $0.5 million, or 884%, as compared to the same period in 2018. Gross profit increased $0.1 million, or 254%, as compared to the same period in 2018. Both increases are primarily due to the discontinued operations treatment and the sale of the retail spine business in October 2018. In addition, cost of revenue increased as a result of increased revenue due to increased sales and marketing efforts from CTL Medical.

Research and Development Expenses

Research and development expenses increased $0.4 million, or 13%, as compared to the same period in 2018. This increase was primarily attributable to an overall increase in R&D activity to support the Company’s strategic objective of developing new technologies and related products.

General and Administrative Expenses

General and administrative expenses decreased $1.0 million, or 25%, as compared to the same period in 2018. This decrease is due to the Company maintaining a lower overhead structure during 2019.

Sales and Marketing Expenses

Sales and marketing expenses increased $0.3 million, or 219%, as compared to the same period in 2018. This increase was primarily attributable to an overall increase in marketing activities to generate interest in and exposure to the Company’s potential new product lines.

Deemed Dividends

Deemed dividends related to a beneficial conversion feature and accretion of discount on convertible preferred stock was recorded at $2.7 million in 2019, compared to $13.9 for 2018. A beneficial conversion amount was calculated in association with the 2018 issuance of certain convertible preferred stock and warrants that could convert to common stock at a discount below the trading price on the date of issuance. The accretion of a discount related to the actual conversion of the preferred stock into common stock. During 2019, 3,825 shares of the preferred stock were converted to common stock and 10,926 shares of the preferred stock were converted to common stock during 2018.

Other Income (Expense), Net

Other income decreased $1.6 million, or 48%, as compared to the same period in 2018. This decrease was primarily due to the change in the fair value of the derivative liabilities in the amount of $5.7 million offset by the decrease in the loss on the extinguishment of derivative liabilities of $1.2 million, the decrease in interest expense of $1.4 million, the decrease in the loss on extinguishment of debt of $0.3 million and the increase in interest income of $0.5 million, and a decrease in offering costs of $0.7 million.

Liquidity and Capital Resources

The consolidated financial statements have been prepared assuming the Company will continue to operate as a going concern, which contemplates the realization of assets and settlement of liabilities in the normal course of business, and does not include any adjustments to reflect the possible future effects on the recoverability and classification of assets or the amounts and classifications of liabilities that may result from uncertainty related to its ability to continue as a going concern within one year from the date of issuance of these consolidated financial statements.

For the years ended December 31, 2019 and 2018, the Company incurred a net loss of $4.8 million and $8.7 million, respectively, and used cash in continuing operations of $6.4 million and $9.3 million, respectively. The Company had an accumulated deficit of $234.1 million and $229.3 million as of December 31, 2019 and 2018, respectively. To date, the Company’s operations have been principally financed from proceeds from the issuance of preferred and common stock and, to a lesser extent, cash generated from product sales. It is anticipated that the Company will continue to generate operating losses and use cash in operations. The Company’s continuation as a going concern is dependent upon its ability to increase sales, and/or raise additional funds through the capital markets. Whether and when the Company can attain profitability and positive cash flows from operations or obtain additional financing is uncertain.

The Company is actively generating additional scientific and clinical data to have it published in leading industry publications. The unique features of our silicon nitride material are not well known, and we believe the publication of such data would help sales efforts as the Company approaches new prospects. The Company is also making additional changes to the sales strategy, including a focus on revenue growth by expanding the use of silicon nitride in other areas outside of spinal fusion applications.

The Company has common stock that is publicly traded and has been able to successfully raise capital when needed since the date of the Company’s initial public offering in February 2014. In March 2018, the Company closed on gross proceeds of $1.4 million, before payment of placement agent fees and costs, on a warrant reprice and exercise transaction. Additionally, on May 14, 2018, the Company closed on a public offering of units, consisting of convertible preferred stock and warrants, for gross proceeds of $15 million, which excludes underwriting discounts and commissions and offering expenses payable by the Company.

During the year ended December 31, 2019, the Company entered into an ATM equity distribution agreement in which the Company may sell, from time to time, shares of common stock having an aggregate offering price of up to $2.5 million (see Note 8). The Company sold 527,896 shares during the year ended December 31, 2019, raising approximately $1.5 million net of issuance cost of $0.2 million. The Company is eligible to raise an additional $0.8 million under this offering.

On October 1, 2018, the Company sold the retail spine business to CTL Medical. The sale included a $6 million noninterest bearing note receivable payable over a 36-month term. The 36-month term of the note receivable requires 18 payments of $138,889 followed by 18 payments of $194,444, with maturing of the note receivable to occur October 1, 2021. The Company expects cash flows totaling $0.6 million from January 1, 2020 through April 30, 2020, the last four months of the initial 18-month payment period, and, cash flows of $3.5 million over the following eighteen months. The buyer also assumed the Company’s $2.5 million related party note payable. Further, the Company raised gross proceeds of approximately $9.4 million subsequent to December 31, 2019, under a rights offering consisting of shares of preferred stock and common stock warrants.

Management has concluded that its existing capital resources and availability under its existing ATM offering, proceeds of approximately $9.4 million from the February 2020 offering, and payments on the note receivable from the purchaser of the Spine business will be sufficient to fund operations for at least the next 12 months, or through March 2021.

Cash Flows

The following table summarizes, for the periods indicated, cash flows from operating, investing and financing activities (in thousands):

Net Cash Used in Operating Activities – continuing operations

Net cash used in operating activities – continuing operations was $6.4 million in 2019, compared to $9.3 million used in 2018, a decrease of $2.9 million. The decrease in the net loss for continuing operations, and related non-cash add backs to the net loss, was $1.8 million from 2019 when compared to 2018. The decrease in cash used for operating activities – continuing operations during 2019 was primarily due to the $1.8 million mentioned above plus changes in the movement of working capital items during 2019 as compared to the same period in 2018 as follows: a $1.5 million decrease in cash used in accounts payable and accrued liabilities, and a $0.3 million decrease in cash used in account and other receivables, offset by a $0.8 million increase in cash payments on operation lease liability.

Net Cash Provided By (Used in) Investing Activities – continuing operations

Net cash provided by investing activities – continuing operations was $1.4 million during 2019, compared to $0.0 million used in investing activities during the same period in 2018, an increase of $1.4 million. The increase in cash provided in investing activities during 2019 was primarily due to an increase of $1.5 million for the proceeds from notes receivable, offset by the decrease of $0.1 million for the purchase of property and equipment.

Net Cash Provided by Financing Activities – continuing operations

Net cash provided by financing activities was $1.4 million during 2019, compared to $14.4 million provided by financing activities during the same period in 2018, a decrease of $13.0 million. The decrease was primarily due to a $7.6 million decrease in cash generated from the issuance of warrant derivative liabilities, a $6.7 million decrease in cash generated from the issuance of preferred stock, a $1.6 million decrease in cash generated from the exercise of warrants, a $0.7 million decrease in proceeds from the issuance of debt, and a $0.2 million increase in cash for capital raise costs, all of which was offset by an increase of $1.5 million in cash generated from the issuance of common stock and $2.3 million decrease in payments for debt extinguishment.

Indebtedness

L2 Capital Debt

On January 31, 2018, the Company signed a promissory note in the aggregate principal amount of up to $0.84 million (the “L2 Note”) for an aggregate purchase price of up to $0.75 million and warrants to purchase up to an aggregate of 68,257 shares of common stock (the “Warrants”) at an exercise price of $3.31 per share. The maturity date was six months from date of funding. The L2 Note’s interest rate was 8% per year and a default interest rate of 18% per year.

On May 14, 2018, the Company closed on an underwritten public offering of units, consisting of convertible preferred stock and warrants, for gross proceeds of $15.0 million. Part of the proceeds from this offering were used to pay off the outstanding debt with L2 Capital. The total payoff was $1.1 million, with $0.7 million in principal and $0.4 million in interest.

Hercules and MEF I, LP/Anson Investments Debt Exchange

On January 3, 2018, the Company entered into an Assignment Agreement (the “Assignment Agreement”) with MEF I, LP and Anson Investments Master Fund (collectively the “Assignees” and each an “Assignee”), Hercules Technology III, L.P. (“HT III”) and Hercules Capital, Inc. (“HC” and, together with HT III, “Hercules”), pursuant to which Hercules assigned to the Assignees all amounts remaining due under the Loan and Security Agreement, dated June 30, 2014, as amended, between the Company and Hercules (the “Loan and Security Agreement”) and (2) the note (the “Hercules Note”) between the Company and Hercules evidencing the amounts due under the Loan and Security Agreement. The total amount assigned by Hercules to the Assignees in the aggregate was $2.3 million and was secured by the same collateral underlying the Loan and Security Agreement. Subsequently, the Company entered into an exchange agreement pursuant to which the Assignees agreed to exchange the Hercules Term Loan obligation acquired by them for two senior secured convertible promissory notes issued by the Company, each in the principal amount of $1.1 million for an aggregate principal amount of $2.2 million, (the “Exchange Notes”). The Exchange Notes were scheduled to mature on February 3, 2019 (the “Maturity Date”). The Exchange Notes had interest at a rate of 15% per annum. The Exchange Notes were secured by a first priority security interest in substantially all of the Company assets, including intellectual property, and contained covenants restricting payments to certain of our affiliates.

On May 14, 2018, the Company closed on an underwritten public offering of units, consisting of convertible preferred stock and warrants, for gross proceeds of $15.0 million. Part of the proceeds from this offering were used to pay off the outstanding debt with MEF I, L.P and Anson Investments. The total payoff was $1.6 million, with $1.4 million in principal and $0.2 million in interest.

North Stadium Term Loan – Related Party

On July 28, 2017, the Company entered into a $2.5 million term loan (the “North Stadium Loan”) with North Stadium Investments, LLC (“North Stadium”), a company owned and controlled by the Company’s Chief Executive Officer and Chairman of the Board. The North Stadium Loan bore interest at 10% per annum and required the Company to make monthly interest only payments from September 5, 2017 through July 5, 2018. All principal and unpaid interest (if any) under the North Stadium Loan was due and payable on July 28, 2018. The North Stadium Loan was secured by substantially all of the Company’s assets but was junior to security interest in assets encumbered by the Hercules Term Loan (see below). In connection with the North Stadium Loan the Company also issued North Stadium a warrant to purchase up to 1,833 shares of the Company’s common stock at a purchase price of $151.20 per share, subject to a 5-year term. The relative estimated value of the warrants on the date of grant approximated $0.2 million, which was being amortized as interest expense over the life of the term loan.

On October 1, 2018, CTL Medical assumed the North Stadium Term Loan debt as part of the sale of the retail spine business. As of December 31, 2018, the Company has been released by North Stadium from any and all obligations related to this debt.

Hercules Term Loan

On June 30, 2014, the Company entered into a Loan and Security Agreement with Hercules which provided the Company with a $20.0 million term loan. The Hercules Term Loan matured on January 1, 2018. The Hercules Term Loan included a $0.2 million closing fee, which was paid to Hercules on the closing date of the loan. The closing fee was recorded as a debt discount and was being amortized to interest expense over the life of the loan. The Hercules Term Loan also included a non-refundable final payment fee of $1.7 million. The final payment fee was being accrued and recorded to interest expense over the life of the loan.

On January 3, 2018, the Hercules Term Loan and all amounts owing thereunder was assigned to MEF I and Anson Investments. See discussion above under “Hercules and MEF I, LP/Anson Investments Debt Exchange” for a more detailed description of that transaction.

Equipment Loan

In September 2019 the Company entered into a debt arrangement with a finance company to purchase equipment. The debt balance at September 30, 2019, totaled $0.02 million. The debt incurs interest at 12%, is collateralized by the equipment and is payable in monthly payments of $1.0 thousand (including interest) over 36 months.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements, as defined in Item 303(a)(4) of Regulation S-K.

Related-Party Transactions

For a description of our related-party transactions, see Item 13 “Certain Relationships and Related Party Transactions, Director Independence” contained in Part III of this 2019 Annual Report on Form 10-K.

Seasonality and Backlog

Our business is generally not seasonal in nature. We derive our product revenue primarily from the sale of spinal fusion products, used in the treatment of spine disorders, to CTL Medical, with whom we have an exclusive sales agreement in place with a remaining term of 9-years. CTL Medical’s sales generally consist of products that are in stock with them or maintained at hospitals or with their sales distributors. Accordingly, we do not have a backlog of sales orders.

Critical Accounting Policies and Estimates

A summary of our significant accounting policies and estimates is discussed in Management’s Discussion and Analysis of Financial Condition and Results of Operations and in Note 1 to our consolidated financial statements included in our Annual Report on Form 10-K for the year ended December 31, 2019. There have been no material changes to those policies for the year ended December 31, 2019, except as explained below in Accounting Pronouncements Adopted in 2019. The preparation of the consolidated financial statements in accordance with U.S. generally accepted accounting principles requires us to make judgments, estimates and assumptions regarding uncertainties that affect the reported amounts of assets and liabilities. Significant areas of uncertainty that require judgments, estimates and assumptions include the accounting for income taxes and other contingencies as well as valuation of derivative liabilities, asset impairment and collectability of accounts receivable. We use historical and other information that we consider to be relevant to make these judgments and estimates. However, actual results may differ from those estimates and assumptions that are used to prepare our consolidated financial statements.

Accounting Pronouncement Adopted In 2019

In August 2016, the FASB updated accounting guidance on the following eight specific cash flow classification issues: (1) debt prepayment or debt extinguishment costs; (2) settlement of zero-coupon debt instruments or other debt instruments with coupon interest rates that are insignificant in relation to the effective interest rate of the borrowing; (3) contingent consideration payments made after a business combination; (4) proceeds from the settlement of insurance claims; (5) proceeds from the settlement of corporate-owned life insurance policies, including bank-owned life insurance policies; (6) distributions received from equity method investees; (7) beneficial interests in securitization transactions; and (8) separately identifiable cash flows and application of the predominance principle. Under prior U.S. GAAP, there was no specific guidance on the eight cash flow classification issues aforementioned. The Company adopted the new guidance effective January 1, 2019. The guidance in this standard did not have a material impact on the financial statements of the Company upon adoption.

In February 2016, the FASB updated the accounting guidance related to leases as part of a joint project with the International Accounting Standards Board (“IASB”) to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements. The Company adopted the new guidance effective January 1, 2019 (see Note 15), using the modified retrospective approach. Adoption of the new guidance resulted in the Company being required to record an additional operating lease right-of-use asset totaling approximately $0.7 million and liability totaling approximately $0.9 million (with $0.7 million incremental to adoption of the new guidance) on the date of adoption. Subsequent to the initial adoption of the new standard the Company amended the lease (see Note 15). The standard did not materially impact the consolidated net loss and had no impact on cash flows.

In May 2014, in addition to several amendments issued during 2016, the FASB updated the accounting guidance related to revenue from contracts with customers, which supersedes nearly all existing revenue recognition guidance under U.S. GAAP. The Company adopted the new guidance effective January 1, 2019. The core principle of the new guidance is that a company should recognize revenue when promised goods or services are transferred to customers in an amount that reflects the consideration to which an entity expects to be entitled for those goods or services. The standard defines a five-step process to achieve this core principle and, in doing so, more judgment and estimates are often required within the revenue recognition process than were required under prior U.S. GAAP. The Company has one primary customer (see Note 14) and related contract that has one performance obligation to which revenue is allocated. Revenue under this contract is recognized when the product is shipped to the customer. The Company generally bills its customer upon shipment of the product and invoices are generally due within 30 days. Historically, the Company’s product returns and exchanges have not been significant. The Company does not anticipate incurring significant incremental costs to obtain contracts with future customers. The guidance in this standard did not have a material impact on the financial statements of the Company upon adoption.

New Accounting Pronouncement, Not Yet Adopted

The Company has reviewed all other recently issued, but not yet adopted, accounting standards, in order to determine their effects, if any, on its results of operations, financial position or cash flows. Based on that review, the Company believes that no other pronouncements will have a significant effect on its financial statements upon adoption.

Revenue Recognition

The Company derives its product revenue primarily from the sale of spinal fusion products, used in the treatment of spine disorders to CTL Medical, with whom the Company has a 10-year exclusive sales agreement in place, 9 years of which remain. The Company is currently pursuing other sales opportunities for silicon nitride outside the spinal fusion application. The sale of the Company’s products has a single performance obligation and revenue is recognized at the time the product is shipped to the customer. In general, the Company’s customers do not have any rights of return or exchange.

As of January 1, 2019, the Company adopted Accounting Standards Update No. 2014-09, Revenue from Contracts with Customers (ASC 606), and elected to use the modified retrospective method. Under the modified retrospective method, the Company has presented prior periods under legacy GAAP, with the cumulative effect of initial application adjusted through beginning retained earnings. The new standard did not have a material impact on the revenue recognition process of the Company and no cumulative effect was recognized upon initial application.

With the adoption of ASC 606 at the beginning of 2019, revenue is recognized when control of the goods or services promised under the contract is transferred to the customer either at a point in time (e.g., upon delivery) or over time (e.g., as performed under the contract). The Company accounts for a contract when it has approval and commitment from both parties, the rights and payment terms of the parties are identified, the contract has commercial substance and collectability of consideration is probable. Contracts are reviewed to determine whether there is one or multiple performance obligations. A performance obligation is a promise to transfer a distinct good or service to a customer and represents the unit of accounting for revenue recognition. For contracts with multiple performance obligations, the expected consideration, or the transaction price, is allocated to each performance obligation identified in the contract based on the relative standalone selling price of each performance obligation. Revenue is then recognized for the transaction price allocated to the performance obligation when control of the promised goods or services underlying the performance obligation is transferred. Contract consideration is not adjusted for the effects of a significant financing component when, at contract inception, the period between when control transfers and when the customer will pay for that good or service is one year or less. Contact modifications that provide for additional distinct goods or services at the standalone selling price are treated as separate contracts. The transaction price for our contracts reflects our estimate of returns, rebates and discounts, which historically have not been significant. Amounts billed to customers for shipping and handling are included in the transaction price and generally are not treated as separate performance obligations as these costs fulfill a promise to transfer the product to the customer. The Company does not employee salespeople to actively seek additional customers; there are no incremental costs for obtaining customers that need to be capitalized.

Account and Other Receivables and Allowance for Doubtful Accounts

Account and other receivables are carried at invoiced amount less an allowance for doubtful accounts. On a regular basis, the Company evaluates account and other receivables and estimates an allowance for doubtful accounts, as needed, based on various factors such as customers’ current credit conditions, length of time past due, and the general economy as a whole. Receivables are written off against the allowance when they are deemed uncollectible.

Inventories

Inventories are stated at the lower of cost or net realizable value, with cost for manufactured inventory determined under the standard costs, which approximate actual costs, determined on the first-in first-out (“FIFO”) method. Manufactured inventory consists of raw material, direct labor and manufacturing overhead cost components. The Company reviews the carrying value of inventory on a periodic basis for excess or obsolete items, and records any write-down as a cost of revenue, as necessary.

Long Lived Intangible Assets

The Company evaluates the carrying value of definite-lived intangibles when events or changes in circumstances indicate that the carrying value may not be recoverable. Factors the Company considers important which could trigger an impairment review include, but are not limited to, significant under-performance relative to historical or projected future operating results, significant changes in the manner of its use of acquired assets or its overall business strategy, and significant industry or economic trends. The Company amortizes definite-lived intangible assets on a straight-line basis over their useful lives. The Company recorded no impairment loss for definite-lived intangible assets during the year ended December 31, 2019. As explained above, the Company sold most intangible assets that had a carrying value to CTL Medical, retaining the carrying value of only one trademark asset.

Property and Equipment

Property and equipment, including leasehold improvements, are stated at cost, less accumulated depreciation and amortization. Property and equipment are depreciated using the straight-line method over the estimated useful lives of the assets, which range from three to five years. Leasehold improvements are amortized over the shorter of their estimated useful lives or the related lease term, generally five years.

The Company reviews the carrying value of the Company’s property and equipment that are held and used in the Company’s operations for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of these assets is determined based upon expected undiscounted future net cash flows from the operations to which the assets relate, utilizing management’s best estimate, assumptions, and projections at the time. If the carrying value is determined to be unrecoverable from future operating cash flows, the asset is deemed impaired and an impairment charge would be recognized to the extent the carrying value exceeded the estimated fair value of the asset. The Company estimates the fair value of assets based on the estimated future discounted cash flows of the asset.

Income Taxes

The Company recognizes deferred tax assets and liabilities for the future tax consequences attributable to the differences between the financial statement carrying value of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates in effect for the fiscal year in which those temporary differences are expected to be recovered or settled. Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be realized.

The Company operates in various tax jurisdictions and is subject to audit by various tax authorities. The Company provides for tax contingencies whenever it is deemed probable that a tax asset has been impaired, or a tax liability has been incurred for events such as tax claims or changes in tax laws. Tax contingencies are based upon their technical merits relative tax law and the specific facts and circumstances as of each reporting period. Changes in facts and circumstances could result in material changes to the amounts recorded for such tax contingencies.

The Company recognizes uncertain income tax positions taken on income tax returns at the largest amount that is more-likely than-not to be sustained upon audit by the relevant taxing authority. An uncertain income tax position will not be recognized if it has less than a 50% likelihood of being sustained.

The Company’s policy for recording interest and penalties associated with uncertain tax positions is to record such items as a component of our income tax provision. For the years ended December 31, 2019 and 2018, the Company did not record any material interest income, interest expense or penalties related to uncertain tax positions or the settlement of audits for prior periods.

Stock-Based Compensation

The Company measures stock-based compensation expense related to employee stock-based awards based on the estimated fair value of the awards as determined on the date of grant and is recognized as expense over the remaining requisite service period. The Company utilizes the Black-Scholes-Merton option pricing model to estimate the fair value of employee stock options. The Black-Scholes-Merton model requires the input of highly subjective and complex assumptions, including the estimated fair value of the Company’s common stock on the date of grant, the expected term of the stock option, and the expected volatility of the Company’s common stock over the period equal to the expected term of the grant. The Company estimates forfeitures at the date of grant and revises the estimates, if necessary, in subsequent periods if actual forfeitures differ from those estimates. The Company accounts for stock options to purchase shares of stock that are issued to non-employees based on the estimated fair value of such instruments using the Black-Scholes-Merton option pricing model.

The Company uses the simplified method as prescribed by the Securities and Exchange Commission Staff Accounting Bulletin No. 107, Share-based Payment, to calculate the expected term of stock option grants to employees as the Company does not have sufficient historical exercise data to provide a reasonable basis upon which to estimate the expected term of stock options granted to employees. The Company utilizes a dividend yield of zero because the Company has never paid cash dividends and has no current intention to pay cash dividends. The risk-free rate of return used for each grant is based on the U.S. Treasury yield curve in effect at the time of grant for instruments with a similar expected life.

Derivative Liabilities

Derivative liabilities include the fair value of instruments such as common stock warrants, preferred stock warrants and convertible features of notes, that are initially recorded at fair value and are required to be re-measured to fair value at each reporting period. The change in fair value of the instruments is recognized as a component of other income (expense) in the Company’s consolidated statements of operations until the instruments settle, expire or are no longer classified as derivative liabilities. The Company estimates the fair value of these instruments using the Black-Scholes-Merton or Monte-Carlo valuation models depending on the complexity of the underlying instrument. The significant assumptions used in estimating the fair value include the exercise price, volatility of the stock underlying the instrument, risk-free interest rate, estimated fair value of the stock underlying the instrument and the estimated life of the instrument.

Not applicable.

Financial Statements

The consolidated financial statements of the Company appear at the end of this Annual Report beginning with the index to Financial Statements on page F-1 (see Part IV, Item 15 “Financial Statements”), and are incorporated herein.

None.

(a) Disclosure Controls and Procedures

We maintain disclosure controls and procedures, as such term is defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934 (the “Exchange Act”), that are designed to ensure that information required to be disclosed in the reports filed or submitted under the Exchange Act, is recorded, processed, summarized, and reported within the time periods specified by the Commission’s rules and forms. Disclosure controls and procedures include controls and procedures designed to ensure that information required to be disclosed in our reports filed or submitted under the Exchange Act are properly recorded, processed, summarized and reported within the time periods required by the Commission’s rules and forms.

We carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer (principal executive officer and principal financial officer), of the effectiveness of the design and operation of these disclosure controls and procedures, as such term is defined in Exchange Act Rule 13a-15(e), as of December 31, 2019. Based on this evaluation, the Chief Executive Officer concluded that our disclosure controls and procedures were effective as of December 31, 2019, the end of the period covered by this Annual Report on Form 10-K.

(b) Management’s Report on Internal Control over Financial Reporting

Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act.

Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness of internal control over financial reporting to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Our internal control over financial reporting is designed to provide reasonable assurance of achieving its objectives as specified above. Management does not expect, however, that our internal control over financial reporting will prevent or detect all error and fraud. Any control system, no matter how well designed and operated, is based upon certain assumptions and can provide only reasonable, not absolute, assurance that its objectives will be met. Further, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the Company have been detected.

Management, including our Chief Executive Officer, has assessed the effectiveness of our internal control over financial reporting as of December 31, 2019. In making our assessment of the effectiveness of internal control over financial reporting, management used the criteria set forth in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”).

As defined in SEC Regulation S-X, a material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis. Based on this assessment, management determined that, as of December 31, 2019, the Company’s internal control over financial reporting was effective.

(c) Changes in Internal Control Over Financial Reporting

As of December 31, 2018, Management, including our Chief Executive Officer concluded the design and operating effectiveness of our controls were inadequate to ensure that complex accounting matters are always properly accounted for and reviewed in a timely manner, as outlined below:

Control Activities – The Company did not always have adequate control activities that were designed and operating effectively, including timely management review controls and controls to verify the completeness and adequacy of information prior to presentation of the information to the independent auditors.

Monitoring Activities – The Company did not always maintain effective monitoring controls related to the financial reporting process.

As of December 31, 2019, the material weaknesses outlined above were remediated. During 2019, a new controller was hired who has implemented controls to verify the completeness and adequacy of information prior to presentation of the information to the independent auditors and has also implemented monitoring controls related to the financial reporting process. The specific controls implemented are as follows:

Other than described above in the Item 9A. Controls and Procedures, there were no changes in our internal control over financial reporting that occurred during 2019 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

None.

PART III

Directors

The following table sets forth the names, ages, and positions with SINTX for each of our directors.

Our Board is divided into three classes (Class I, Class II and Class III) with staggered three-year terms. Directors in each class are elected to serve for three-year staggered terms that expire in successive years. Officers serve at the discretion of our Board. The following is information on the business experience of each director now serving and a discussion of the qualifications, attributes and skills that led to the Board of Directors’ conclusion that each one is qualified to serve as a director.

The following is a brief summary of the background of each of our directors.

Class III Directors— up for election at the 2020 Annual Meeting of Stockholders with a term expiring at the 2023 annual meeting of stockholder if re-elected.

B. Sonny Bal, M.D. has served on our Board of Directors since February 2012, as Chairman of our Board of Directors since August 2014 and as our President and Chief Executive Officer since October 2014. Dr. Bal was a tenured Professor in Orthopaedic Surgery at the University of Missouri, Columbia, and has an extensive history of research into silicon nitride ceramics. He is Adjunct Professor of Material Sciences at Missouri Science and Technology University at Rolla. Dr. Bal is a member of the American Academy of Orthopaedic Surgeons, the American Association of Hip and Knee Surgeons, and the International Society of Technology in Arthroplasty. Dr. Bal received his M.D. degree from Cornell University and an M.B.A. from Northwestern University, a J.D. from the University of Missouri, and a Ph.D. in Engineering from the Kyoto Institute of Technology in Japan. We believe that Dr. Bal’s breadth of experience and scientific expertise in silicon nitride qualifies him to serve as our Chairman, President and Chief Executive Officer.

Jeffrey S. White has served on our Board of Directors since January 2014. From January 2013 to 2018, Mr. White served as Principal at Medtech Advisory Group LLC, a firm he founded that advises early and mid-stage medical technology firms. In that capacity Mr. White has consulted MiMedx Group Inc., the leading amniotic tissue and allograft regenerative biomaterials firm since mid-2015 and served as Vice President, Product Management Strategies at MiMedix. Mr. White previously served as a director of Residency Select LLC, a company which offers psychometric assessment, training and compliance products to medical and surgical residency programs. Mr. White also served in 2014 and 2015 as President and director of Liventa Bioscience LLC, a provider of specialty amniotic tissue allografts for use in surgical and wound care applications. From May 2006 to December 2012 he served as Global Director of Business Development for Synthes Inc., a global orthopedic firm that was acquired by Johnson and Johnson in 2012. Mr. White has served as Chief Executive Officer and/or co-founder of several start-up surgical device firms and has previously held executive level positions at United States Surgical Corporation, now part of Medtronic. Mr. White holds a B.S. in Biology from Union College in Schenectady NY. We believe that Mr. White’s experience as an executive and founder of medical device companies qualifies him to serve on our Board of Directors.

Class II Directors - continuing directors with a term expiring at the 2022 annual meeting of stockholders.

David W. Truetzel has served on our Board of Directors since our acquisition of US Spine, Inc. in September 2010. Mr. Truetzel has been the general partner of Augury Capital Partners, a private equity fund that invests in life sciences and information technology companies, which he co-founded in 2006. Mr. Truetzel is a director of Enterprise Bank, Inc., Bonfyre, LLC, a provider of enterprise technology management solutions, and Paranet, LLC, an IT services provider. Mr. Truetzel holds a B.S. in Business Administration from Saint Louis University and an M.B.A. from The Wharton School. We believe that Mr. Truetzel’s financial and managerial expertise qualify him to serve on our Board of Directors.

Eric A. Stookey has served on our Board of Directors since October 2014. Mr. Stookey has served as Chief Operating Officer of Osteoremedies, LLC since March of 2015. From October 2011 until August 2014, Mr. Stookey served as the President of the Extremities-Biologics division at Wright Medical Group Inc. Mr. Stookey also served in various other marketing and sales positions at Wright Medical Group Inc. since 1995, including as the Senior Vice President and Chief Commercial Officer from January 2010 to November 2011, as the Vice President North American Sales from 2007 to January 2010, as the Vice President US Sales from 2005 to 2007, as the Senior Director of Sales, Central Region, from 2003 to 2005 and as the Director of Marketing for Large Joint Reconstruction Products from 2001 to 2003. Mr. Stookey earned his M.B.A. from Christian Brothers University and his B.S. in Business from the Indiana University School of Business. We believe that Mr. Stookey’s industry and executive leadership experience qualifies him to serve on our Board of Directors.

Class I Directors - continuing directors with a term expiring at the 2021 annual meeting of stockholders.

Mark Froimson, M.D. has served on our Board of Directors since February 2019. Dr. Froimson is currently a Principal at Riverside Health Advisors, a consulting company that provides strategic advice and services to health care executive leaders. Dr. Froimson served as the President of the American Association of Hip and Knee Surgeons from March 2017 to March 2018. Previously, he was the Executive Vice President and Chief Clinical Officer of Trinity Health, a major national non-profit Catholic healthcare system comprising 93 hospitals in 22 states. Prior to his executive leadership position at Trinity Health, Dr. Froimson was President and Chief Executive Officer of Euclid Hospital, a Cleveland Clinic Hospital. Dr. Froimson served as a staff surgeon in the Department of Orthopedic Surgery at the Cleveland Clinic for over 16 years, during which time he held a variety of leadership positions, including President of the professional staff, Vice Chair of the Orthopedic and Rheumatologic Institute, and member of the board of governors and board of trustees. Dr. Froimson also serves on the board of directors of Pacira Biosciences, Inc., a publicly traded company on the NASDAQ Stock Market. Dr. Froimson received a B.S. in philosophy from Princeton University, an M.D. from Tulane University School of Medicine and an MBA from the Weatherhead School of Business at Case Western Reserve University.

We believe Dr. Froimson’s qualifications to sit on our Board include his clinical expertise and executive experience in the medical field.

Executive Officers

Our current executive officers and their respective ages and positions are as follows:

The following is a brief summary of the background of each of our executive officers.

B. Sonny Bal, M.D. has served on our Board of Directors since February 2012, as Chairman of our Board of Directors since August 2014 and as our President and Chief Executive Officer since October 2014. Dr. Bal was a tenured Professor in Orthopaedic Surgery at the University of Missouri, Columbia, and has an extensive history of research into silicon nitride ceramics. He is Adjunct Professor of Material Sciences at Missouri Science and Technology University at Rolla. Dr. Bal is a member of the American Academy of Orthopaedic Surgeons, the American Association of Hip and Knee Surgeons, and the International Society of Technology in Arthroplasty. Dr. Bal received his M.D. degree from Cornell University and an M.B.A. from Northwestern University, a J.D. from the University of Missouri, and a Ph.D. in Engineering from the Kyoto Institute of Technology in Japan. We believe that Dr. Bal’s breadth of experience and scientific expertise in silicon nitride qualifies him to serve as our Chairman, President and Chief Executive Officer.

Bryan J. McEntire has served as our Chief Scientific Officer since May 2012. From June 2004 to May 2012 he served as our Vice President of Manufacturing and as our Vice President of Research from December 2006 to May 2012. Dr. McEntire has worked in various advanced ceramic product development, quality engineering and manufacturing roles at Applied Materials, Inc., (Santa Clara, CA), Norton Advanced Ceramics, a division of Saint-Gobain Industrial Ceramics Corporation (E. Granby, CT), Norton/TRW Ceramics (Northboro, MA) and Ceramatec, Inc., (Salt Lake City, UT). Dr. McEntire has a BS degree in Materials Science and Engineering and an MBA both from the University of Utah (Salt Lake City, UT), and a Ph.D. from the Kyoto Institute of Technology (Kyoto, Japan).

David O’Brien has served as our Chief Operating Officer since July 2019. Mr. O’Brien previously served as the Company’s Vice President and General Manager from October 2016 to July 2019 and from March 2014 through September 2016, he held prior roles as our Vice President of Operations and Vice President of Manufacturing. Mr. O’Brien has over 30 years of experience in engineering, manufacturing, and operations leadership in advanced materials and medical device organizations. From 2005 to 2014, he fulfilled several engineering leadership roles for Covidien including Manufacturing Engineering Manager for the Norfolk, Nebraska facility. From 1991 to 2005, he worked for Arnold Magnetic Technologies in the production of ceramic, powder metal and molded magnets in multiple facilities across the U.S. and in England. He has extensive experience with Lean and other Continuous Improvement initiatives. Mr. O’Brien holds an M.S. in Ceramic Engineering from the Georgia Institute of Technology, and a B.S. in Physics from the University of Texas at San Antonio.

Arrangements between Officers and Directors

To our knowledge, there is no arrangement or understanding between any of our officers and any other person, including directors, pursuant to which the officer was selected to serve as an officer.

Family Relationships

None of our directors are related by blood, marriage, or adoption to any other director, executive officer, or other key employees.

Other Directorships

With the exception of Dr. Froimson, who is also on the board of directors of Pacira Biosciences, Inc., a SEC public reporting company, none of the directors of the Company are also directors of issuers with a class of securities registered under Section 12 of the Exchange Act (or which otherwise are required to file periodic reports under the Exchange Act).

Other Involvement in Certain Legal Proceedings

None of our directors or executive officers has been involved in any bankruptcy or criminal proceedings (other than traffic and other minor offenses) or been subject to any of the items set forth under Item 401(f) of Regulation S-K, nor have there been any judgments or injunctions brought against any of our directors or executive officers during the last ten years that we consider material to the evaluation of the ability and integrity of any director or executive officer.

The Board and Committees

Our Board of Directors has five members. The Chairman of the Board and our Chief Executive Officer, B. Sonny Bal, MD, PhD, is a member of the Board and is a full-time employee of SINTX. David W. Truetzel, Eric A. Stookey, Jeffrey S. White, and Mark Froimson are non-employee directors, and the Board has determined that these persons (who constitute a majority of the Board) are “independent directors” under the criteria set forth in Rule 5605(a)(2) of the Nasdaq Listing Rules. The Board met four (4) times during the year ended December 31, 2019. All directors attended all of the meetings of the Board and committee meetings of which such director was a member held during 2019.

In accordance with our restated Certificate of Incorporation, our Board of Directors is divided into three classes with staggered three-year terms. At each annual meeting of stockholders, the successors to the directors whose terms then expire will be elected to serve until the third annual meeting following such election. Our directors are divided among the three classes as follows:

Any additional directorships resulting from an increase in the number of directors will be distributed among the three classes so that, as nearly as possible, each class will consist of one-third of the directors.

Our Board of Directors has three permanent committees: the Audit Committee, the Compensation Committee, and the Corporate Governance and Nominating Committee. The written charters for these committees are on our website at https://ir.sintx.com/corporate-governance. Our Board of Directors may from time to time establish other standing committees. In addition, from time to time, special committees may be established under the direction of our Board of Directors when necessary to address specific issues.

The following table sets forth a description of the three permanent Board committees and the chairpersons and members of those committees, all of whom are independent directors:

Corporate Governance and Nominating Committee

The Corporate Governance and Nominating Committee is currently comprised of the following members: Eric A. Stookey (Chairman), David W. Truetzel and Jeffrey S White. Among other items, the Corporate Governance and Nominating Committee is tasked by the Board to: (1) identify individuals qualified to serve as members of the Board and, recommend individuals to be nominated by the Board for election by the stockholders or to be appointed by the Board to fill vacancies consistent with the criteria approved by the Board; (2) develop and periodically evaluate and recommend changes to SINTX’s Corporate Governance Guidelines and Code of Ethics, and to review the Company’s policies and programs that relate to matters of corporate responsibility, including public issues of significance to the Company and its stakeholders; and (3) oversee an annual evaluation of the performance of the Board. The Board has determined that each of the members of the Corporate Governance and Nominating Committee is “independent” under the standard set forth in Rule 5605(a)(2) of the Nasdaq Listing Rules. The Corporate Governance and Nominating Committee did not meet as a separate committee in 2019, but rather, because the committee is comprised of all three independent directors, governance matters were addressed as necessary in meetings of the Board. The Corporate Governance and Nominating Committee operates under a written charter adopted by the Board of Directors, which sets forth the responsibilities and powers delegated by the Board to the Corporate Governance and Nominating Committee.

Board Nominations

In considering Board candidates, the Board seeks individuals of proven judgment and competence who have strong reputations in their respective fields. Although we do not have a formal diversity policy, the Board considers such factors as experience, education, employment history, special talents or personal attributes, anticipated participation in Board activities, and geographic and diversity factors. The process for identifying and evaluating nominees would include detailed consideration of the recommendations and opinions of members of our Board, our executive officers, and our stockholders. There would be no difference in the process of evaluation of candidates recommended by a stockholder and those recommended by other sources.

The Nominating and Governance Committee has adopted a policy and procedures for shareholders to recommend nominees to the Company’s Board. The Committee will only consider qualified proposed nominees that meet the qualification standards set forth on Appendix A to the Committee’s charter available on the Company’s website at www.SINTX.com. Pursuant to the policy, only shareholders who meet minimum percentage ownership requirements as established by the Board may make recommendations for consideration by the Committee. At this time, the Board has set a minimum percentage ownership of 5% of the Company’s issued and outstanding shares of common stock for a period of at least one year. To make recommendations, a shareholder must submit the recommendation in writing by mail, courier or personal delivery to: Corporate Secretary, SINTX Technologies, Inc., 1885 West 2100 South, Salt Lake City, UT 84119. For each annual meeting the Committee will consider only one proposed nominee from each shareholder or shareholder group (within the meaning of Regulation 13D under the Exchange Act).

The recommendation must set forth (1) the name, address, including telephone number, of the recommending shareholder or shareholder group; (2) the number of the Company’s shares of common stock held by such shareholder and proof of ownership if the shareholder is not a holder of record; and (3) a statement that the shareholder has a good faith intention of holding the shares through the record date of the Company’s next annual meeting. For shareholder groups this information must be submitted for each shareholder in the group.

The recommendation must set forth in relation to the proposed nominee being recommended by the shareholder: (1) the information required by Items 401, 403 and 404 of Regulation S-K under the Exchange Act, (2) any material relationships or agreements between the proposed nominee and the recommending shareholder or the Company’s competitors, customers, labor unions or other persons with special interests in the Company; (3) a statement regarding the qualifications of the proposed nominee to serve on the Board; (4) a statement that the proposed nominee can fairly represent the interests of all shareholders of the Company; and (5) a signed consent by the proposed nominee to being interviewed by the Nominating and Governance Committee.

Recommendations must be made not later than 120 calendar days prior to the first anniversary of the date of the proxy statement for the prior annual meeting of shareholders. In the event that the date of the annual meeting of shareholders for the current year is more than 30 days following the first anniversary date of the annual meeting of shareholders for the prior year, the submission of a recommendation will be considered timely if it is submitted not earlier than the close of business on the 120 days prior to such annual meeting and not later than the close of business on the later of 90 days prior to such annual meeting or the close of business 10 days following the day on which public announcement of the date of such meeting is first made by the Company.

Audit Committee

We have a standing Audit Committee and audit committee charter, which complies with Rule 10A-3 of the Exchange Act, and the requirements of the Nasdaq Listing Rules. Our Audit Committee was established in accordance with Section 3(a)(58)(A) of the Exchange Act. The Audit Committee is currently comprised of the following members: David W. Truetzel (Chairman), Eric A. Stookey and Jeffrey S White. The Audit Committee provides oversight for financial reporting matters, internal controls, and compliance with the Company’s financial policies, and meets with its auditors when appropriate. The Audit Committee did not meet as a separate committee in 2019, but rather, because the committee is comprised of all three independent directors, committee matters were addressed as necessary in meetings of the Board. The Board has determined that David W. Truetzel is an “audit committee financial expert” within the meaning of Item 407(d)(5) of Regulation S-K. Further, the Board has determined that each of David W. Truetzel, Jeffrey S. White and Eric A. Stookey are “independent” under the standard set forth in Rule 5605(a)(2) of the Nasdaq Listing Rules. The Audit Committee operates under a written charter adopted by the Board of Directors, which sets forth the responsibilities and powers delegated by the Board to the Audit Committee.

Compensation Committee

The Compensation Committee of the Board is comprised of the following members: Jeffrey S. White, (Chairman), David W. Truetzel and Eric A. Stookey. The Board has determined that each of David W. Truetzel, Jeffrey S. White and Eric A. Stookey are “independent” under the standard set forth in Rule 5605(a)(2) of the Nasdaq Listing Rules. The Compensation Committee recommends to the Board for determination compensation of our executive officers, including the chief executive officer, and addresses salary and benefit matters for other key personnel and employees of the Company. The Compensation Committee did not meet as a separate committee in 2019, but rather, because the committee is comprised of all three independent directors, committee matters were addressed as necessary in meetings of the Board. The Compensation Committee operates under a written charter adopted by the Board of Directors, which sets forth the responsibilities and powers delegated by the Board to the Compensation Committee.

Code of Business Conduct

The Board has adopted a Code of Business Conduct that applies to all of our employees, officers and directors, including those officers responsible for financial reporting. The code of business conduct is available on our website at https://ir.sintx.com/corporate-governance. We intend to disclose any amendments to the code or any waivers of its requirements on our website.

The Bylaws of the Company provide that no contract or transaction between SINTX and one or more of its directors or officers, or between SINTX and any other corporation, firm, association, or other organization in which one or more of its directors or officers are financially interested, shall be void or voidable solely for this reason, or solely because the director or officer is present at or participates in the meeting of the Board of Directors or committee that authorizes or approves the contract or transaction, or because their votes are counted for such purpose, provided that:

The following discussion relates to the compensation of our “named executive officers.”

Summary Compensation Table

The following table sets forth information about certain compensation awarded or paid to our named executive officers for the 2019 and 2018 fiscal years.

Narrative Disclosure to Summary Compensation Table. We do not have written employment agreements with any of our executive officers. All of our executive officers serve on an at-will basis. The base salaries for our named executive officers were determined by our compensation committee after reviewing a number of factors, including: the responsibilities associated with the position, the seniority of the executive’s position, the base salary level in prior years, and our financial position; and for executive officers other than our Chief Executive Officer, recommendations made by our Chief Executive Officer.

Outstanding Equity Awards at Fiscal Year-End

The following table shows information regarding equity awards held by our named executive officers as of December 31, 2019:

401(k) Plan

We offer our executive officers, including our named executive officers, retirement benefits, including participation in our tax-qualified profit sharing plan that includes a “cash-or-deferred” (or 401(k)) feature in the same manner as other employees. The plan is intended to satisfy the requirements of Section 401 of the Internal Revenue Code. Our employees may elect to reduce their current compensation by up to the statutorily prescribed annual limit and have a like amount contributed to the plan. In addition, we may make discretionary and/or matching contributions to the plan in amounts determined annually by our Board. We currently elect to match the contributions of our employees who participate in our 401(k) plan as follows: a match of 100% on the first 3% of compensation contributed by a plan participant and a match of 50% on amounts above 3%, up to 5%, of compensation contributed by a plan participant.

Potential Payments upon Termination or Change in Control

We had entered into certain agreements and maintained certain plans that may have required us to make certain payments and/or provide certain benefits to the executive officers named in the Summary Compensation Table in the event of a termination of employment or change in control.

Pursuant to severance agreements that we have entered into with each of our named executive officers, upon the consummation of a change in control, all outstanding options, restricted stock and other such rights held by the executives will fully vest. Additionally, if a change in control occurs and at any time during the one-year period following the change in control (i) we or our successor terminate the executive’s employment other than for cause (but not including termination due to the executive’s death or disability) or (ii) the executive terminates his employment for good reason, then such executive has the right to receive payment consisting of a lump sum payment equal to two times his highest annual salary with us during the preceding three-year period, including the year of such termination and including bonus payments (measured on a fiscal year basis), but not including any reimbursements and amounts attributable to stock options and other non-cash compensation. “Change in control” is defined in the severance agreements as occurring upon: (i) any “person” (as such term is used in Sections 13(d) and 14(d) of the Exchange Act) becoming the “beneficial owner” (as defined in Rule 13d-3 under the Exchange Act), directly or indirectly, of securities representing 50% or more of the total voting power represented by our then outstanding voting securities (excluding securities held by us or our affiliates or any of our employee benefit plans) pursuant to a transaction or a series of related transactions which our Board did not approve; (ii) a merger or consolidation of our company, other than a merger or consolidation which would result in our voting securities outstanding immediately prior thereto continuing to represent at least 50% of the total voting securities or such surviving entity or parent of such corporation outstanding immediately after such merger or consolidation; or (iii) the approval by our stockholders of an agreement for the sale or disposition of all or substantially all of our assets. As defined in the severance agreements, “cause” means: (i) the executive’s commission of a felony (other than through vicarious liability or through a motor vehicle offense); (ii) the executive’s material disloyalty or dishonesty to us; (iii) the commission by the executive of an act of fraud, embezzlement or misappropriation of funds; (iv) a material breach by the executive of any material provision of any agreement to which the executive and we are party, which breach is not cured within 30 days after our delivery to the executive of written notice of such breach; or (v) the executive’s refusal to carry out a lawful written directive from our Board. “Good reason” as defined in the severance agreements means, without the executive’s consent: (i) a change in the principal location at which the executive performs his duties to a new work location that is at least 50 miles from the prior location; or (ii) a material change in the executive’s compensation, authority, functions, duties or responsibilities, which would cause his position with us to become of less responsibility, importance or scope than his prior position, provided, however, that such material change is not in connection with the termination of the executive’s employment with us for any reason.

In the event that an officer entitled to receive or receives payment or benefit under the severance agreements described above, or under any other plan, agreement or arrangement with us, or any person whose action results in a change in control or any other person affiliated with us and it is determined that the total amount of payments will be subject to excise tax under Section 4999 of the Internal Revenue Code, or any similar successor provisions, we will be obligated to pay such officer a “gross up” payment to cover all taxes, including any excise tax and any interest or penalties imposed with respect to such taxes due to such payment.

Code of Business Conduct Violations

It is our policy under our Code of Business Conduct to take appropriate action against any executive officer whose actions are found to violate the Code or any other policy of SINTX. Disciplinary actions may include immediate termination of employment and, where SINTX has suffered a loss, pursuing its remedies against the executive officer responsible. SINTX will cooperate fully with the appropriate authorities where laws have been violated.

Role of the Board in Risk Oversight

Risk is inherent with every business, and how well a business manages risk can ultimately determine its success. Management is responsible for the day-to-day management of the risks that we face, while our Board of Directors, as a whole and through its committees, has responsibility for the oversight of risk management. In its risk oversight role, our Board of Directors is responsible for satisfying itself that the risk management processes designed and implemented by management are adequate and functioning as designed.

Our Board of Directors does not have a standing risk management committee, but rather administers this oversight function directly through our Board of Directors as a whole, as well as through various standing committees of the Board of Directors that address risks inherent in their respective areas of oversight. In particular, our Board of Directors is responsible for monitoring and assessing strategic risk exposure, including a determination of the nature and level of risk appropriate for us. Our Audit Committee has the responsibility to consider and discuss our major financial risk exposures and the steps our management has taken to monitor and control these exposures, including guidelines and policies to govern the process by which risk assessment and management is undertaken. The Audit Committee also monitors oversight of the performance of our internal audit function. Our Corporate Governance and Nominating Committee monitors the effectiveness of our corporate governance guidelines, including whether they are successful in preventing illegal or improper liability-creating conduct. Our Compensation Committee assesses and monitors whether any of our compensation policies and programs have the potential to encourage excessive risk-taking or promote behaviors contra to our Code of Business Conduct.

Board Compensation

The following table shows the total compensation paid or accrued during the fiscal year ended December 31, 2019 to each of our non-employee directors.

The following compensation schedule sets forth compensation for non-employee directors (paid on a quarterly basis) as approved by the Board:

A new Board appointee receives an award of 40,000 stock options upon appointment. Further, historically, each member of the Board is awarded an option grant for 15,000 stock options on an annual basis. No awards were made for 2019.

The chair of the Audit Committee is paid an annual retainer of $120,000 payable in monthly increments of $10,000 each.

Equity Compensation Plan Information

The following table sets forth information as of December 31, 2019 relating to all of our equity compensation plans:

2012 Equity Incentive Plan

The 2012 Plan is intended to encourage ownership of common stock by our employees and directors and certain of our consultants in order to attract and retain such people, to induce them to work for the benefit of us and to provide additional incentive for them to promote our success. The number of shares of our common stock reserved for issuance under the 2012 Plan is 3,173, which number is automatically increased on January 1 of each of year by the lesser of (i) 601 shares of our common stock on such date, (ii) 5% of the number of outstanding shares of our common stock on such date, and (iii) such other amount determined by the Board through the termination of the 2012 Plan.

Types of Awards. The 2012 Plan provides for the granting of incentive stock options, NQSOs, stock grants and other stock-based awards, including RSUs.

● Incentive and Nonqualified Stock Options. The plan administrator determines the exercise price of each stock option. The exercise price of an NQSO may not be less than the fair market value of our common stock on the date of grant. The exercise price of an incentive stock option may not be less than the fair market value of our common stock on the date of grant if the recipient holds 10% or less of the combined voting power of our securities, or 110% of the fair market value of a share of our common stock on the date of grant otherwise.

● Stock Grants. The plan administrator may grant or sell stock, including restricted stock, to any participant, which purchase price, if any, may not be less than the par value of shares of our common stock. The stock grant will be subject to the conditions and restrictions determined by the administrator. The recipient of a stock grant shall have the rights of a stockholder with respect to the shares of stock issued to the holder under the 2012 Plan.

● Stock-Based Awards. The administrator of the 2012 Plan may grant other stock-based awards, including stock appreciation rights, phantom stock awards and RSUs, with terms approved by the administrator, including restrictions related to the awards. The holder of a stock-based award shall not have the rights of a stockholder until shares of our common stock are issued pursuant to such award.

Plan Administration. Our Board is the administrator of the 2012 Plan, except to the extent it delegates its authority to a committee, in which case the committee shall be the administrator. Our Board has delegated this authority to our compensation committee. The administrator has the authority to determine the terms of awards, including exercise and purchase price, the number of shares subject to awards, the value of our common stock, the vesting schedule applicable to awards, the form of consideration, if any, payable upon exercise or settlement of an award and the terms of award agreements for use under the 2012 Plan.

Eligibility. Our Board will determine the participants in the 2012 Plan from among our employees, directors and consultants. A grant may be approved in advance with the effectiveness of the grant contingent and effective upon such person’s commencement of service within a specified period.

Termination of Service. Unless otherwise provided by our Board or in an award agreement, upon a termination of a participant’s service, all unvested options then held by the participant will terminate and all other unvested awards will be forfeited.

Transferability. Awards under the 2012 Plan may not be transferred except by will or by the laws of descent and distribution, unless otherwise provided by our Board in its discretion and set forth in the applicable agreement, provided that no award may be transferred for value.

Adjustment. In the event of a stock dividend, stock split, recapitalization or reorganization or other change in change in capital structure, our Board will make appropriate adjustments to the number and kind of shares of stock or securities subject to awards.

Corporate Transaction. If we are acquired, our Board of Directors (or Compensation Committee) will: (i) arrange for the surviving entity or acquiring entity (or the surviving or acquiring entity’s parent company) to assume or continue the award or to substitute a similar award for the award; (ii) cancel or arrange for cancellation of the award, to the extent not vested or not exercised prior to the effective time of the transaction, in exchange for such cash consideration, if any, as our Board of Directors in its sole discretion, may consider appropriate; or (iii) make a payment, in such form as may be determined by our Board of Directors equal to the excess, if any, of (A) the value of the property the holder would have received upon the exercise of the award immediately prior to the effective time of the transaction, over (B) any exercise price payable by such holder in connection with such exercise. In addition, in connection with such transaction, our Board of Directors may accelerate the vesting, in whole or in part, of the award (and, if applicable, the time at which the award may be exercised) to a date prior to the effective time of such transaction and may arrange for the lapse, in whole or in part, of any reacquisition or repurchase rights held by us with respect to an award.

Amendment and Termination. The 2012 Plan will terminate on September 6, 2022 or at an earlier date by vote of the stockholders or our Board; provided, however, that any such earlier termination shall not affect any awards granted under the 2012 Plan prior to the date of such termination. The 2012 Plan may be amended by our Board, except that our Board may not alter the terms of the 2012 Plan if it would adversely affect a participant’s rights under an outstanding stock right without the participant’s consent. Stockholder approval will be required for any amendment to the 2012 Plan to the extent such approval is required by law, include the Internal Revenue Code or applicable stock exchange requirements.

Amendment of Outstanding Awards. The administrator may amend any term or condition of any outstanding award including, without limitation, to reduce or increase the exercise price or purchase price, accelerate the vesting schedule or extend the expiration date, provided that no such amendment shall impair the rights of a participant without such participant’s consent.

The following table sets forth certain information regarding the beneficial ownership of our common stock as of March 19, 2020 by: