SMART Global Holdings, Inc. - Annual Report: 2019 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D. C. 20549

FORM 10‑K

(Mark One)

For the fiscal year ended August 30, 2019

or

For the transition period from            to           

Commission File Number 001-38102

SMART GLOBAL HOLDINGS, INC.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (510) 623-1231

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark if the registrant is a well‑known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes  ☐    No  ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S‑T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non‑accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b‑2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b‑2 of the Act).    Yes  ☐    No  ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant, based on the closing price of the shares of common stock on The NASDAQ Stock Market on March 1, 2019 (the last business day of the registrant’s most recently completed second fiscal quarter), was $378.5 million. Shares of common stock held by each executive officer, director, and their affiliated holders have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of October 18, 2019, the registrant had 23,746,664 ordinary shares outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Proxy Statement for the 2019 General Meeting are incorporated herein by reference in Part III of this Annual Report on Form 10-K to the extent stated herein.  Such proxy statement will be filed with the Securities and Exchange Commission within 120 days of the registrant’s fiscal year ended August 30, 2019.

SMART GLOBAL HOLDINGS, INC.

TABLE OF CONTENTS

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K (“Annual Report”) contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, which statements involve substantial risks and uncertainties. Forward-looking statements generally relate to future events or our future financial or operating performance. In some cases, you can identify forward-looking statements by the use of forward-looking words such as “anticipate,” “believe,” “could,” “expect,” “should,” “plan,” “intend,” “estimate” and “potential,” among others.

Forward-looking statements appear in a number of places in this Annual Report and include, but are not limited to, statements regarding our intent, belief or current expectations. Forward-looking statements are based on our management’s beliefs and assumptions and on information currently available to our management. Such statements are subject to risks and uncertainties, and actual results may differ materially from those expressed or implied in the forward-looking statements due to various factors, including, but not limited to, those identified under the section entitled “Item 1A. Risk Factors” in this Annual Report. These risks and uncertainties include factors relating to:

Forward-looking statements speak only as of the date they are made, and we do not undertake any obligation to update them in light of new information or future developments or to release publicly any revisions to these statements in order to reflect later events or circumstances or to reflect the occurrence of unanticipated events, except as otherwise required by the rules and regulations of the Securities and Exchange Commission.

2

ABOUT THIS ANNUAL REPORT

Unless otherwise indicated or the context otherwise requires, all references in this Annual Report on Form 10-K to “SMART Global Holdings” or the “Company,” “Registrant,” “we,” “our,” “ours,” “us” or similar terms refer to SMART Global Holdings, Inc., or SMART Global Holdings, together with its subsidiaries, and, where the context requires, our predecessor entities. We use a 52- to 53-week fiscal year ending on the last Friday in August. Unless the context indicates otherwise, whenever we refer in this Annual Report to a particular year, with respect to ourselves, we mean the fiscal year ending in that particular calendar year. Financial information for two of our subsidiaries, SMART Modular Technologies Indústria de Componentes Eletrônicos Ltda., or SMART Brazil, and SMART Modular Technologies do Brasil Indústria e Comércio de Componentes Ltda., or SMART do Brazil, is included in our consolidated financial statements on a one-month lag because their fiscal years begin August 1 and end July 31.

All references herein to the “real,” “reais” or “R$” are to the Brazilian real. All references herein to “U.S. dollars,” “dollars” or “$” are to U.S. dollars. Solely for the convenience of the reader, we have translated certain amounts in this Annual Report from reais into U.S. dollars using the exchange rate as reported by the Banco Central do Brasil as of July 31, 2019 of R$3.7649 to $1.00. These translations should not be considered representations that any such amounts have been, could have been or could be converted into U.S. dollars at that or at any other exchange rate as of that or any other date. In addition, translations should not be construed as representations that the real amounts represent or have been or could be converted into U.S. dollars as of that or any other date.

3

Part I.

Item 1. Business

Overview

We are a leading designer and manufacturer of electronic products focused in memory and computing technology areas. We specialize in application specific product development and support for customers in enterprise, government and original equipment manufacturer, or OEM, markets. We support our customers with our worldwide manufacturing and supply chain management capabilities. We operate in three primary product areas:

In specialty memory products, we are a global leader serving the electronics industry for over 30 years. We have a leading market position worldwide as measured by revenue. We work closely with OEM customers to develop solutions which incorporate customer-specific requirements. Our products are designed-in by OEMs in the industrial, defense, networking and communications, enterprise storage and computing, and other vertical markets. We also offer customized, integrated supply chain services to enable our customers to better manage supply chain planning and execution, reduce costs and increase productivity. Our supply chain services are based on our proprietary software platform that we developed and integrated with our customers’ respective procurement management systems as well as our suppliers’ distribution management systems.

In Brazil we have established a leading market position, as measured by market share, where we are the largest in-country manufacturer of memory and our products are designed-in by OEM customers for desktops, notebooks and servers, as well as mobile memory for smartphones. In this market, we process imported wafers and die and we cut, package and test them to create dynamic random access memory, or DRAM, modules and other DRAM and Flash-based products. We have a strategic, long-term relationship with a global memory wafer supplier that has provided us with a stable source of competitively priced wafers for the Brazil market. The relationship also provides our supplier with access to that market through our in-country infrastructure and capabilities. We have continued to build upon our business in Brazil by adding our battery assembly capability to address the local smartphone market.

In order to diversify and grow our business, we acquired Penguin Computing, Inc., or Penguin Computing, in June 2018, and created our Specialty Compute and Storage Solutions, or SCSS, product group. As a result, we have expanded our serviceable markets into areas requiring specialized computing platforms in artificial intelligence, or AI, machine learning, or ML, advanced modeling and high performance computing, or HPC. Penguin Computing provides solutions to Tier 1 and a broad base of secondary customers in the financial services, energy, government, social media and education markets.

Additionally, in July 2019, we expanded our SCSS product line to include embedded computing products through the acquisitions of Artesyn Embedded Computing, Inc., or AEC, and Inforce Computing, Inc., or Inforce. AEC is a global leader in the design and manufacture of standard and custom products providing highly reliable embedded computing solutions for a broad range of defense, industrial, telecommunications infrastructure and network edge computing, and transportation customers for over 35 years. Inforce is a leading system-on-module, or SOM, and single board computer, or SBC, supplier targeting a wide range of IoT endpoint applications across the industrial, digital health, smart city, and smart office markets. After completion of these acquisitions, we changed the name of AEC to SMART Embedded Computing, Inc., or SMART EC, and changed the name of Inforce to SMART Wireless Computing, Inc., or SMART Wireless.

Our Products and Services

Specialty Memory Products

In our specialty memory products business, we focus on the design and manufacture of application-specific products, technical support and value-added testing services that differ from the core focus of standard memory module providers. We collaborate closely with our global OEM customers throughout their design process and across multiple projects to create solutions for demanding applications with differentiated requirements, such as specific form factors, higher density, lower power, specific firmware or greater durability and reliability compared to standard solutions. We target opportunities where we believe we can be a primary supplier of longer-lifecycle solutions to OEM customers for diverse and growing end markets within the industrial, defense, networking and communications, and enterprise storage and computing markets as well as other vertical markets. In this business, we offer an extensive portfolio of over 2,000 products available in standard and rugged formats.

4

We offer an extensive lineup of DRAM modules utilizing a wide range of DRAM technologies from legacy Synchronous DRAM to double data-rate, or DDR, DDR2, DDR3 and leading edge, high-performance DDR4 DRAM devices. These technologies are incorporated into enterprise memory and hybrid memory solutions in standard and rugged formats. These modules encompass a broad range of form factors and functions, including dual in-line memory modules, or DIMMs, nonvolatile DIMMs, load reducing DIMMs, registered DIMMs, unbuffered DIMMs, small outline dual in-line memory modules, and mini-DIMMs and XR-DIMMs for industrial and defense, networking and communications, enterprise storage and computing, and other vertical markets. These memory modules come in configurations of up to 288 pins and densities of up to 128 gigabytes. We support leading-edge and emerging interconnect standards such as Gen-Z and OpenCAPI with our Gen-Z Memory module (ZMM) and Differential DIMM (DDIMM). We utilize advanced printed circuit board and device packaging/stacking technologies to achieve cost-effective, high-density solutions. We also develop specialized memory module designs based on specific OEM requirements. Our products are designed to meet the quality requirements of enterprise class systems pursuant to stringent specifications required by various high-speed applications.

We also design and manufacture embedded and removable Flash memory products in a variety of form factors and capacities incorporated into storage and hybrid memory solutions in standard and rugged formats. Our wide range of Flash memory products includes Serial Advanced Technology Attachment, or SATA, and PCIe NVMe products in 2.5” enclosures, M.2 and other module form factors. We also offer Flash component products such as embedded multimedia controllers, or eMMC, and embedded and removal products in USB, CompactFlash and SD/microSD Card configurations. Our Flash capabilities include application-specific and customized firmware development.  

We also offer supply chain services, including procurement, logistics, inventory management, temporary warehousing, programming, kitting and packaging services. We tailor our supply chain service offerings to meet the specific needs of our customers to enable our customers to manage supply chain planning and execution, which reduces costs and increases productivity. Our supply chain services are based on our proprietary software platform that we develop, which is then integrated with our customers’ respective procurement management systems as well as our suppliers’ distribution management systems. Our global footprint allows us to provide these services to our customers and their manufacturing partners in many regions of the world. Our global inventory management capabilities allow us to manage a vast array of customer and supplier part numbers across our worldwide manufacturing and logistics hubs, helping our customers minimize inventory levels while maintaining reliable delivery and availability of supply.

Brazil Products

In Brazil we manufacture DRAM modules for desktops, notebooks and servers, where local manufacturing requirements provide substantial financial incentives to our customers to procure locally manufactured memory modules. We have leveraged our experience and infrastructure in Brazil and now process, dice, package and test imported wafer products to create DRAM and Flash components. These capabilities have enabled us to significantly expand our product offering to add mobile memory products, primarily for smartphones. The expanded product offering includes mobile or low power DRAM, eMMC products, and embedded multi-chip package, or eMCP products for smartphones. We also have continued to build upon our success in Brazil by adding our battery assembly capabilities and we are now expanding our manufacturing to include products for the IoT market.

Specialty Compute and Storage Solutions  

Through Penguin Computing we offer specialty compute and storage system solutions to customers in a broad set of verticals including financial services, energy, government, social media and education end markets. We provide a broad portfolio of hardware and software products including solutions based on the Open Compute Project, or OCP. Our products include servers, software, integrated turn-key clusters, enterprise-grade storage, and bare metal HPC, all available in hardware or cloud-based solutions via Penguin Computing® On-Demand™ (POD™). Our product offering includes our Open Compute Tundra Extreme Scale products to solve technical challenges. We also provide turn-key storage solutions that provide power and flexibility with hardware optimized for software-defined storage based upon our Frostbyte™ storage platform. Our rackmount servers and GPU accelerated computing platforms give customers powerful tools to implement their AI and ML advanced modeling and high performance computing applications. Complementing our compute, storage and networking hardware solutions is our Scyld Software line of cloud and cluster management software. These products provide advanced capabilities for management of HPC clusters from department-level systems to supercomputers. In addition, they enable customers to provide their own HPC cloud with remote access via our proprietary Cloud Workstation browser-based solution.

5

Our SMART EC products, which are now part of SCSS, provide advanced computing solutions and low profile embedded computing solutions. Building on its long heritage, SMART EC is a well-recognized, leading provider of advanced computing solutions and professional services. Our high-end advanced computing system solutions include application-ready platforms, SBCs, enclosures, blades, enabling software, edge servers and network accelerator cards. SMART EC’s advanced computing board and system solutions include ATCA, VME, PCIe, rackmount server and failsafe products. The target markets for these products are defense, telecommunications infrastructure, industrial, network edge computing, and transportation applications.

SMART Wireless products, which are also part of SCSS, include low profile wireless computing modules such as SOMs and SBCs for wireless computing endpoint applications. We offer standard and custom solutions, along with development boards and services for all forms of connected devices targeting IoT endpoint applications such as smart city, digital health, and smart office.

Manufacturing and Test

Manufacturing

We have manufacturing facilities in Atibaia, Brazil, Newark, California and Penang, Malaysia. These manufacturing facilities have been ISO 9001:2015, ISO 14001:2015 and ISO 4500:2018 certified. We also have manufacturing and integration facilities in Fremont, California where assembly and test of our Penguin Computing products is done. Additionally, we are a member of the Responsible Business Alliance, or RBA, and our manufacturing facilities are compliant with the RBA Code of Conduct which is increasingly a business requirement of our customers.

We believe that our manufacturing operations for specialty memory products for OEM customers have benefited from our many years of design experience and our existing library of proven designs which stress high manufacturability and quality. Over 30 years of manufacturing experience enables us to quickly move from manufacturing initiation to full production volumes of new products, which is paramount in helping our customers achieve rapid time-to-market for their new product introductions. As a result of our design efficiencies, high level of automation and expertise in utilizing advanced manufacturing processes, we achieve high manufacturing yields and reduced direct labor costs and offer our customers quick turnaround of both small and large production orders, which is a key factor in enabling our build-to-order model.

While we do not own or operate wafer fabs, we have capabilities for subsequent stages of the product manufacturing cycle. Our manufacturing capabilities in Brazil consist of receiving unmounted integrated circuits, or ICs, in wafer form from third-party wafer fabs, preparing and packaging the ICs into semiconductor components, testing the components, and in some cases placing these components on substrates or printed circuit boards to make modules or multi-chip packages. Our advanced manufacturing capabilities have enabled us to become the largest local manufacturer, as measured by market share, of DRAM components and DRAM modules for the desktop, notebook and server markets in Brazil, as well as various Flash-based products, including eMCP and eMMC products for the mobile phone market. Through our investments and experience in Brazil, we have developed expertise in semiconductor technology and advanced manufacturing and test that allows us to manufacture products with shrinking geometries and increasing complexity. We have made significant capital investments to expand our manufacturing and test capabilities and operate at a high level of efficiency.

In our SCSS products, we have utilized two primary methods of fulfilling demand for products: building products to order and configuring products to order in each case using components and subassemblies that we acquire from a wide range of vendors. At Penguin Computing, we have developed capabilities for design and development of large scale systems and dense HPC clusters that have significant power requirements with manufacturing and test for our HPC products being done in Fremont, California.

Product testing is an important aspect of our manufacturing operations and we believe that we have established substantial technical expertise in the testing of products for high-end applications. Our extensive testing capabilities not only help to ensure a low defect rate, but they also enable us, in certain situations, to sell specialized testing as an additional service. We design customer specific testing processes that differ from the core focus of standard providers. We have achieved stringent quality targets across a broad spectrum of system applications and customer-specific designs. Our staff includes experienced test engineers who have developed proprietary testing routines and parameters which, combined with our advanced test equipment, enable us to diagnose problems in components as well as in system design, and enable us to characterize the performance of new products and to provide high quality products in volume.

6

We employ extensive software-based electrical and thermal simulations and test our designs on high-end functional testers utilizing a broad set of test suites. These tests are designed to meet the quality requirements of enterprise class systems pursuant to stringent specifications required by various high speed and high compute applications. We also conduct design verification testing of hardware and firmware as well as system integration and reliability testing. We work to continually improve our test routines and associated software and for our specialty memory products, we have developed a high-volume, fully automated reliability testing and screening capability substantially beyond standard industry practices that enables us to reduce the occurrence of early life failures and weak module fallout which can save our customers from the often significant expenses associated with replacing products that fail after their field deployment.

Customers

We believe our customers rely on us as a strategic supplier due to our application-specific products, quality and technical support, our global footprint and, in Brazil, our ability to provide locally manufactured products. We also provide customized, integrated supply chain services to certain OEM customers to assist them in the management and execution of their procurement processes. We believe our close collaboration with customers, customer-specific designs, long-lifecycle solutions and proprietary supply chain services create significant customer attachment.

We sell our products and solutions directly to a diversified base of local and global OEM, enterprise and government customers. Our specialty memory products are sold primarily to OEM customers in industrial, defense, networking and communications, enterprise storage and computing, as well as other vertical markets. In SCSS, we sell Penguin Computing products to enterprise and government customers in financial services, energy, defense, social media and education end markets and we sell SMART EC products to OEM customers in defense, telecommunications infrastructure, industrial, network edge computing and transportation markets., In SMART Wireless, we sell products to OEMs in IoT endpoint applications such as smart city, digital health, and smart office markets. In Brazil, we sell to OEM customers in computing and mobile products.

Overall, we served more than 750 end customers in fiscal 2019. In fiscal 2019, 2018 and 2017, sales to our ten largest end customers (including sales to contract manufacturers or ODMs at the direction of such end customers) accounted for 73%, 84% and 84% of net sales, respectively. Of our end customers, Samsung Electronics Co., Ltd., or Samsung, (for whom all sales are direct sales) accounted for 18%, 34% and 19% of net sales in fiscal 2019, 2018 and 2017, respectively; Cisco Systems, Inc., or Cisco, accounted for 11%, 12% and 15% of net sales in fiscal 2019, 2018 and 2017, respectively; Lenovo Group Limited, or Lenovo, accounted for 13%, 11% and 11% of net sales in fiscal 2019, 2018 and 2017, respectively; and Dell Technologies Inc., or Dell, accounted for 10% of net sales in fiscal 2018. Direct sales to Flex accounted for 17%, 13% and 14% of net sales in fiscal 2019, 2018 and 2017, respectively; and direct sales to Hon Hai accounted for 13% of net sales in fiscal 2017. During these periods, no other customers accounted for more than 10% of our net sales.

Our products are manufactured on a build-to-order basis. Our sales are made primarily pursuant to customer purchase orders and are not based on long-term supply agreements. Accordingly, we have limited backlog and we do not believe our backlog is material or indicative of anticipated net sales.

Suppliers

To address the needs of our customers, we have developed and maintained relationships with leading semiconductor suppliers located in Asia, Europe and the Americas. Our semiconductor suppliers include many of the world’s largest memory manufacturers including Samsung Semiconductor, Inc., or Samsung, Micron Technology, Inc., or Micron, SK Hynix, Inc., or SK Hynix, and Toshiba Corporation, or Toshiba. They also include some of the world’s largest providers of computing, communications and graphics processers including Intel Corporation, or Intel,, Advanced Micro Devices, Inc., or AMD, Nvidia Corporation, or Nvidia and Qualcomm Incorporated, or Qualcomm; as well as providers of subsystems including Intel and Giga-Byte Technology Co., Ltd., or Giga-Byte; networking products including Artista Networks, Inc., or Artista, and Mellanox Technologies, Ltd., or Mellanox; and suppliers of software products including Red Hat, Inc., or Red Hat. We frequently work jointly with our suppliers in bidding for customers’ design-in opportunities. We also work closely with our suppliers to better ensure that materials are available and delivered on time. Our established global network of materials sourcing helps to ensure that our pricing remains competitive and that we are able to provide a stable source of supply for our customers.

7

We believe that our longstanding relationships with leading suppliers put us in a favorable position to procure sufficient quantities of materials, including during periods of industry shortages. Our flexible and responsive global manufacturing capabilities, inventory management systems and global IT system allow us to cost-effectively move materials from one site to another and often deploy what might otherwise be excess inventory among other products and customers. We purchase almost all of our materials, including wafers used in our memory products in Brazil, from our suppliers on a purchase order basis and generally do not have long-term commitments from suppliers.

Sales, Support and Marketing

We primarily sell our products directly to global OEMs, enterprise, government and other end customers located across North America, Latin America, Asia and Europe. Our sales and marketing efforts are conducted through an integrated process incorporating our direct sales force, customer service representatives and our on-site field application engineers, or FAEs, with a network of independent sales representatives, distributors, integrators and resellers. Our sales and marketing efforts also include a high level of involvement from our senior executives. Larger customers are also often supported by dedicated sales and support teams. As of August 30, 2019, we had 134 sales and marketing personnel worldwide.

Our on-site FAEs work closely with our sales team to provide product design support to our customers. Our FAEs collaborate closely with our customers, providing us with insight into their business models and product roadmaps and allowing us to identify opportunities at an early stage to help grow our business. The combination of our integrated sales network with our FAEs enables us to be more responsive and successful in navigating through each customer’s unique and oftentimes complex design qualification or bid proposal processes.

Our marketing activities include advertising in technical journals, publishing articles in leading industry periodicals, social media, periodic webinars, publishing white papers and utilizing direct email solicitation. In addition to these marketing activities, we also participate in many industry trade shows worldwide. We have active memberships in industry organizations such as the Joint Electron Device Engineering Council, or JEDEC, the USB Implementers Forum, the SD Card Association, the Storage Networking Industry Association, the CompactFlash Association, Gen-Z Consortium, OpenCAPI Consortium, CXL Consortium, Trusted Computing Group, or TCG, the OCP, Sensor Open Systems Architecture, or SOSA, and Peripheral Component Interconnect Special Interest Group, or PCI-SIG.

Research and Development

The timely development of new products is essential to maintaining our competitive position. Our research and development activities are conducted primarily at our research and development centers in Newark, Fremont and Irvine, California; Bangalore and Kochin, India; Atibaia, Brazil; Penang, Malaysia; Tempe and Gilbert, Arizona; Seongnam-City, South Korea; New Taipei City, Taiwan; and Tewksbury, Massachusetts.  Our research and development activities are focused on driving innovation in our products as well as continuous process improvement for our procurement, test and manufacturing. Our product development in specialty memory and Brazil includes innovations for next generation DRAM products, mobile DRAM, hybrid memories such as hybrid volatile and non-volatile DRAM or NVDIMM, enterprise memory, many Flash-based products, such as eMMC and eMCP, and new battery assembly technologies. Our research and product development for Penguin Computing includes server selection and design, designs to enable integration of racks and clusters, storage system design and evaluation, high performance network design, component testing for switches, cables and interface devices, and development of software defined storage systems. Our product development for SMART EC and SMART Wireless includes embedded computer boards and systems. We plan to continue to devote research and development efforts to the innovation and design of these and other new products which address the requirements of our customers, with a focus on the faster growing markets.

We continue to develop a broad offering of Flash-based products targeting the industrial, defense, communications, and enterprise storage and compute markets. In order to enhance our efforts to develop innovative Flash products, we continue to increase our engineering resources significantly, including in our research and development center in New Taipei City, where our engineering team is dedicated to firmware development, systems engineering and integration, system and platform validation and applications, and product and reliability engineering for new Flash memory products. In addition, in order to take advantage of local regulations and government incentive programs for the growing mobile memory market in Brazil, we have invested substantial financial and management resources to expand our Brazilian research and development capabilities to enable us to develop a broad offering of Flash-based products for the local market. We are also working on expanding our offering for IoT and IIoT products and, through our acquisition of SMART Wireless, we now have over 40 design engineers combined in our two locations in India.  

8

Our advanced engineering and design capabilities allow us to address our customers’ increasingly complex needs. We design our products to be compatible with existing industry standards and, where appropriate, develop and promote new standards or provide custom solutions to meet customers’ requirements. An important aspect of our research and development effort is understanding the challenges presented by our customers’ requirements and addressing them by utilizing our industry knowledge, proprietary technologies and technical expertise. By working closely with our customers and suppliers, we are able to deliver technically advanced products designed to meet customer-specific needs with competitive solutions to satisfy our customers’ memory, storage and compute requirements, shorten their time-to-market and enhance the performance of our customers’ end products and applications.

We spent $47.9 million, $39.8 million and $38.2 million on research and development in fiscal 2019, 2018 and 2017, respectively. As of August 30, 2019, we had 282 research and development personnel worldwide.

Competition

In our specialty memory products and our Brazil products, we primarily compete against global and local memory module providers, and to a lesser extent, large semiconductor memory IC manufacturers that utilize a portion of their capacity to manufacture memory modules. In our Penguin Computing products we primarily compete with global manufacturers of HPC products and services. In SMART EC products, we primarily compete with makers of ruggedized computer boards and systems as well as makers of edge computing devices. In SMART Wireless products, we primarily compete with providers of SOMs and SBCs. The principal competitive factors in our markets include the ability to meet customer-specific requirements and provide high product quality, strong technical support, technologically advanced products and services, advanced testing capabilities, flexible and global delivery options, reliable supply and reasonable pricing. Our principal competitors include:

Some of our global competitors are large international companies that have substantially greater financial, technical, marketing, distribution and other resources, as well as greater name recognition and longer-standing relationships with customers and suppliers than we do. In contrast with our focus on specialty or niche products with high levels of service and support, these competitors are generally focused on higher-volume memory, storage or compute products that are manufactured to industry standard specifications, and they have limited customization and service capabilities. We believe that our close collaboration with customers, customer-specific designs, long-lifecycle solutions and proprietary supply chain services create significant customer attachment that may provide an advantage when competing with the large international companies.

9

In addition, some of our competitors are also our suppliers or customers. See “Item A. Risk Factors—Risks Relating to Our Business—Sales to a limited number of customers represents a significant portion of our net sales, and the loss of any key customer or key program, or the demands of our key customers, could materially harm our business, results of operations and financial condition” and “—Our dependence on a small number of sole or limited source suppliers subjects us to certain risks, including the risk that we may be unable to obtain adequate supplies at a reasonable price and in a timely manner.”

In Brazil, other than the large, global semiconductor manufacturers, our competitors are generally much smaller in scale than we are in terms of revenue and capabilities for manufacturing and for research and development. To a lesser degree, we compete with companies that import DRAM and Flash components and products as well as battery products.

Intellectual Property

We rely on a combination of trade secrets, know-how, trademarks, copyright and, to a lesser extent, patents to protect our intellectual property rights. As of October 18, 2019, we have 155 issued patents, including 115 patents issued in the United States, 36 patents issued in China, one patent issued in Brazil and 3 patents issued in South Korea, expiring between 2019 and 2037, excluding any additional patent term for patent term adjustments. In addition, we have 40 patent applications pending, including 19 patent applications in the United States, 7 patent applications in China, 7 patent applications in Brazil, 6 patent applications in Malaysia,  and 1 patent application in Argentina.  

We also own a number of trademark registrations, including registrations in the United States for the word marks MHUB, SMART MODULAR TECHNOLOGIES and PENGUIN COMPUTING, and trademarks for our stylized “S” logo in combination with the word SMART and in combination with the words SMART MODULAR TECHNOLOGIES;  a trademark in the US and Canada for the graphic logo containing the words PENGUIN COMPUTING; in Brazil, registrations for our stylized “S” logo in combination with the words SMART Modular Technologies; and in Canada, a registration for the word mark PENGUIN COMPUTING. With the acquisition of AEC, we acquired the following registered trademarks: CENTELLIS in the U.S., China, Canada, Mexico, Brazil, India, Germany, Norway, Russia, EU, Hong Kong, Japan, Korea, Taiwan, Australia;  MAXCORE in Mexico, Germany, EU, India, Japan, Taiwan, Australia (and pending in U.S., Canada, Brazil, Norway, Russia, China, Hong Kong, Korea);  CONTROLSAFE (and logo) in Japan, Norway, Korea, U.S. (and pending in Canada and China);  FORCE in Norway, UK, WIPO, Austria, Benelux, Switzerland, Germany, EU, Spain, France, Italy, Montenegro, Serbia, Yugoslavia;  SRSSTACKWARE in U.S., China; RAPIDEX in Germany;  COMSTRUCT in UK;  SPIDERWARE in China.

While many of our products contain proprietary aspects, the majority of our products are built to meet industry standards, such as those set by JEDEC, the standards-setting organization for the semiconductor industry. The absence of patent protection for most of our products means that we cannot prevent our competitors from reverse-engineering and duplicating those products. Much of our intellectual property is know-how and trade secrets, and often we rely on the technological skills and innovation of our personnel rather than on patent protection. We believe that our continued success depends largely on our customer relationships, manufacturing and support capabilities and the technical expertise we have developed in manufacturing and designing products, and we rely on trade secret laws and non-disclosure agreements to protect this aspect of our business.

Employees

As of August 30, 2019, we had 1,712 full-time employees.

Our employee relations in Brazil are subject to Brazilian labor laws and regulations as well as collective bargaining arrangements that are negotiated every year. Five of these collective bargaining agreements are specific to our company while there are other collective bargaining agreements that are generally applicable to certain segments of the electronics industry. The applicable labor laws and regulations, as well as the collective bargaining agreements, principally relate to matters such as general working conditions, working time compensation, paid vacation and sick days and other mandatory benefits, length of the workday and payments for overtime, profit sharing and severance. Although a very small number of our employees in Brazil are members of a labor union, all employees in Brazil are represented by the unions for labor and employment matters.

10

We have never experienced a work stoppage in any of our locations worldwide, and we consider our employee relations to be good.

Brazil Local Manufacturing Requirements

The Brazilian government has a long history of utilizing local manufacturing requirements to promote job creation, sustain economic growth and increase the competitiveness of various domestic industries. These regulations have also helped enable the expansion of the Brazilian middle class. These requirements have been important in the development of numerous industries in Brazil, including automotive, oil and gas, aerospace and healthcare. Beginning in 1991, local manufacturing regulation was introduced to vitalize Brazil’s IT industry as government programs began to be implemented to incentivize manufacturers to establish and expand their operations in Brazil and to incentivize OEMs to apply and utilize locally manufactured components for their products.

We have participated in three government investment incentive programs.

11

As the leading local manufacturer, as measured by market share, of desktop, notebook and server DRAM modules and DRAM components as well as DRAM and Flash mobile memory products in Brazil, we have benefited from these requirements and incentives.

In 2013, the European Union, or EU, later joined by Japan, requested the establishment of a panel within the World Trade Organization, or WTO, to determine whether the structure of certain programs enacted by the Brazilian government concerning incentives and local content requirements for the automotive and several other industries (including the IT industry and including portions of Lei do Bem that do not relate to our business, as well as PADIS and the PPB/IT Program), were inconsistent with WTO rules. On August 30, 2017 the WTO panel released a report and on December 13, 2018, after hearing appeals, the appellate body of the WTO released its decision in which it upheld some of the panel’s findings that certain of the incentives available to us in Brazil are contrary to certain of the principles of the WTO agreements while also rejecting some of the complaints by the EU and Japan. The WTO’s decision does not impact the benefits that we receive under Lei do Bem. The appellate body also noted that it would not contravene the principles of the WTO agreements for Brazil to establish local manufacturing processes as a condition to benefit from incentives granted by the government provided that certain conditions are met.

In response to the WTO report, government authorities in Brazil revoked several ordinances that established local content requirements under the PPB/IT Program, many of which were related to our local business. The revocation became effective June 30, 2019. Government officials in Brazil have continued to express their intent to restructure the incentives to be consistent with the WTO principles while still continuing to support local industry.

In June 2019, the authorities in Brazil published the first of a series of new ordinances, effective as of July 1, 2019, that provide a structure for revised support for local manufacturing utilizing a score-based point system for eligibility for incentives. In this system, each manufacturing process within an electronic device is assigned a different number of points. Our manufacturing processes related to memory products are a valuable part of the electronics manufacturing chain and, as such, are expected to provide our customers the opportunity to accomplish a significant number of the overall points required if they purchase products manufactured by us in Brazil.

While we believe that this score-based system will continue to incentivize our Brazilian customers to purchase products from us in Brazil, there can be no assurance that the replacement programs will ultimately be structured and implemented in a way that will provide the same or a similar level of support and benefit for our customers and our business as was previously in place. There can also be no assurance that the WTO, the EU and Japan will agree that this new program structure is compliant with the WTO agreements. Any adverse change in legislation or in the impact and effectiveness of the local incentives programs, or our failure to meet the requirements of any of the regulations, could significantly reduce the demand for, the profit margins on, and the competitiveness of our products in Brazil, and would have a material adverse effect on our business, results of operations and financial condition. See “Item A. Risk Factors—Risks Relating to Our Business—Risks Related to our International Operations— Our success in Brazil depends in part on Brazilian laws establishing incentives for local manufacturing of electronics products. The elimination of or a reduction in the incentives for local manufacturing, or our inability to secure the benefits of these regulations, could significantly reduce the demand for, and the profit margins on, our products in Brazil.”

Environmental Regulations

Our operations and properties are subject to a variety of environmental laws and regulations of the United States and other jurisdictions governing, among other things, air emissions, wastewater discharges, management and disposal of hazardous and non-hazardous materials and wastes, reverse logistics (take-back policy) and remediation of releases of hazardous materials. The presence of lead in quantities not believed to be significant have been found in the ground under one of the multi-tenant buildings we lease in Brazil. While we did not cause the contamination, we may be held responsible if remediation is required, although we may be entitled to seek indemnification from responsible parties under Brazilian law and from our lessor under our lease. We cannot be certain that identification of presently unidentified environmental conditions, more vigorous enforcement by regulatory agencies, enactment of more stringent laws and regulations or other unanticipated events will not arise in the future and cause additional material liabilities which could have a material adverse effect on our business, financial condition and results of operations.

12

Corporate Information

Our address in the Cayman Islands is c/o Maples Corporate Services Limited, P.O. Box 309, Ugland House, Grand Cayman, KY1-1104, Cayman Islands. Our U.S. principal executive offices are located at 39870 Eureka Drive, Newark, California 94560. Our telephone number at this address is (510) 623-1231. Our principal website is http://www.smartm.com. The information contained on, or that can be accessed through, our website is not a part of this Annual Report.

SMART Global Holdings, SMART Modular Technologies, SMART, the SMART logo, Penguin Computing, the Penguin Computing logo, and our other trademarks or service marks appearing in this Annual Report are our property. Trade names, trademarks and service marks of other companies appearing in this Annual Report are the property of the respective holders.  

Available Information

We make available, free of charge through our website, our annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K, and amendments to those reports, filed or furnished pursuant to Sections 13(a) or Section 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after they have been electronically filed with, or furnished to, the Securities Exchange Commission, or SEC.

The public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F. Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.

13

Item 1A.  Risk Factors

You should carefully consider the risks and uncertainties described below and the other information in this Annual Report on Form 10-K, including “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and related notes. Our business, financial condition or results of operations could be materially and adversely affected if any of these risks occurs and, as a result, the market price of our ordinary shares could decline and you could lose all or part of your investment.

This Annual Report also contains forward-looking statements that involve risks and uncertainties. See “Cautionary Note Regarding Forward-Looking Statements” for additional information.  Our actual results could differ materially and adversely from those anticipated in these forward-looking statements as a result of certain factors, including the risks facing our company described below and elsewhere in this Annual Report.

Risks Relating to Our Business

Our operating results have fluctuated in the past and may fluctuate from quarter to quarter in the future, which makes them difficult to predict.

Our quarterly operating results have fluctuated in the past and may fluctuate in the future. As a result, our past quarterly operating results are not necessarily indicative of future performance. Furthermore, we may not be able to maintain the margins we have achieved in recent periods. Our operating results in any given quarter can be influenced by numerous factors, many of which we are unable to predict or are outside of our control, including:

Due to the various factors mentioned above and other factors, the results of any prior quarterly or annual period should not be relied upon as an indication of our future operating performance. In one or more future periods, our results of operations may fall below the expectations of securities analysts and investors. In that event, the market price of our ordinary shares would likely decline. In addition, the market price of our ordinary shares may fluctuate or decline regardless of our operating performance.

14

We have experienced losses in the past and may experience losses in the future.

Our business has experienced quarterly and annual operating losses during the periods presented in the financial statements included in this Annual Report. For example, in fiscal 2017, we had a net loss of $7.8 million. Our ability to maintain profitability depends in part on revenue growth from, among other things, increased demand for our memory solutions, products and related service offerings in our current markets including Brazil, growth in our SCSS business unit including the newly acquired companies SMART EC and SMART Wireless, as well as our ability to expand into new markets. We may not be successful in achieving the revenue and revenue growth necessary to maintain profitability. Moreover, as we continue to expend substantial funds for research and development projects, enhancements to sales and marketing efforts, integration of acquisitions and to otherwise operate our business, we cannot assure you that we will maintain profitability on an annual or quarterly basis even if our revenue does grow.

The markets in which we compete historically have been highly cyclical and have experienced severe downturns that have materially adversely affected, and may in the future materially adversely affect, our business, results of operations and financial condition.

Historically, the markets in which we compete have been highly cyclical and have experienced significant downturns often connected with, or in anticipation of, maturing product cycles of both component suppliers and electronic equipment manufacturers, and/or declines in general economic conditions. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of selling prices and inventory values. Our industry depends on the continued growth of the electronics industry and on end-user demand for our customers’ products. Economic downturns often have had an adverse effect upon manufacturers and end-users of electronics products. The timing of new product developments, the lifecycle of existing electronics products and the level of acceptance and growth of new products can also affect demand for our products. Downturns in the markets we serve could have a significant negative impact on the demand for our products. Additionally, due to changing conditions, our customers have experienced and may in the future experience periods of excess inventory that could have a significant adverse impact on our sales. During an industry downturn, there is also a higher risk that some of our trade receivables become delinquent or even uncollectible and that our inventory would decrease in value. We cannot predict the timing or the severity of the cycles within our industry. In particular, it is difficult to predict how long and to what levels any industry upturn or downturn, or general economic strength or weakness, will last or develop.

Our OEM customers primarily serve end users in the industrial, networking and communications, storage and computing, mobile products, defense, financial services, energy, social media, education, network edge computing, transportation, and IoT endpoint applications markets. Sales of our products are dependent upon demand in these markets. From time to time, each of these markets has experienced cyclical downturns, often in connection with, or in anticipation of, declines in general economic conditions, and we may experience substantial period-to-period fluctuations in our operating results due to factors affecting these markets. Changes in end-user demand for our customers’ products and services could have a material adverse effect on demand for our products and services, particularly if the customer has accumulated excess inventories of products purchased from us or from competitors selling similar products. Reduced demand for our products could have a material adverse effect on our business, results of operations and financial condition.

Declines in memory component prices and our average selling prices may result in declines in our net sales and gross profit and could have a material adverse effect on our business, results of operations and financial condition.

The markets for our specialty memory and Brazil products have historically been characterized by declines in average selling prices. Our average selling prices may decline due to several factors, including general declines in demand for our products and excess supply of DRAM and Flash memory components as a result of overcapacity. In the past, transitions to smaller design geometries and other factors causing overcapacity in memory markets have led to significant increases in the worldwide supply of memory components. If not accompanied by increases in demand, supply increases usually result in significant declines in component prices and, in turn, declines in the average selling prices and profit margins of our products. During periods of overcapacity, our net sales may decline if we fail to increase sales volume of existing products or to introduce and sell new products in quantities sufficient to offset declines in selling prices. Our efforts to increase sales or to introduce new products to offset the impact of

15

declines in average selling prices may not be successful. Furthermore, our competitors and customers also impose significant pricing pressures on us. These declines in average selling prices have in the past had, and may again in the future have, a material adverse effect on our business, results of operations and financial condition. Declines in prices also could affect the valuation of our inventory, which could result in inventory write-downs. Declines in average selling prices also might enable OEMs to pre-install higher density memory modules into new systems at existing price points, thereby reducing the demand for future memory upgrades. In addition, our net sales and gross profit may be negatively affected by shifts in our product mix during periods of declining average selling prices.

Worldwide economic and political conditions as well as other factors may adversely affect our operations and cause fluctuations in demand for our products.

Uncertainty in global economic and political conditions poses a risk to the overall economy, as consumers and businesses have made it difficult for customers, suppliers and us to accurately forecast and plan future business activities. Declines in the worldwide semiconductor market, economic conditions or consumer confidence would likely decrease the overall demand for our products. Other factors that could cause demand for our products to fluctuate include:

If demand for our products decreases, our manufacturing or assembly and test capacity could be underutilized, and we may be required to record an impairment on our long-lived assets, including facilities and equipment, as well as intangible assets, which would increase our expenses. In addition, if product demand decreases or we fail to forecast demand accurately, we could be required to write-off inventory or record underutilization charges, which would have a negative impact on our profitability. If product demand increases more or faster than anticipated, we may not be able to add manufacturing or assembly and test capacity fast enough to meet market demand. These changes in demand for our products, and changes in our customers’ product needs, could have a variety of negative effects on our competitive position and our financial results, and, in certain cases, may reduce our net sales, increase our costs, lower our profit margins or require us to recognize impairments of our assets. The occurrence of any of the foregoing could have a material adverse effect on our business, results of operations and financial condition.

Changes in U.S. trade policies, including the imposition of tariffs and a potential resulting trade war, could have a material adverse impact on our business.

We source materials from and sell products in foreign countries, including China, making the price and availability of our merchandise susceptible to international trade risks and other international conditions. In addition, many of our customers rely heavily on international trade. The imposition of tariffs, duties, border adjustment taxes or other trade restrictions by the United States could also result in the adoption of new or increased tariffs or other trade restrictions by other countries. The tariffs may in the future increase our cost of materials and may cause us to increase prices to our customers which we believe may reduce demand for our products. Our price increases may not be sufficient to fully offset the impact of the tariffs and result in lowering our margin on products sold. In addition, the current U.S. administration has indicated that it may withdraw the U.S. from the North American Free Trade

16

Agreement (“NAFTA”) in order to encourage the U.S. Congress to vote on the ratification of the United States-Mexico-Canada Agreement (“USMCA”) which was signed in 2018 and which is intended to be the successor to NAFTA. If the U.S. government increases or implements additional tariffs, withdraws from NAFTA, the ratification and implementation of the USMCA is not completed promptly and effectively, or if additional tariffs or trade restrictions are implemented by the U.S. or other countries, the resulting trade barriers could have a significant adverse impact on our suppliers, our customers and on our business. We are not able to predict future trade policy of the U.S. or of any foreign countries in which we operate or purchase goods, or the terms of any renegotiated trade agreements, or their impact on our business. The adoption and expansion of trade restrictions and tariffs, quotas and embargoes, the occurrence of a “trade war,” or other governmental action related to tariffs or trade agreements or policies, has the potential to adversely impact demand for our products, our costs, our customers, our suppliers and the world and U.S. economies, which in turn could have a material adverse effect on our business, operational results, financial position and cash flows.

Sales to a limited number of customers represent a significant portion of our net sales, and the loss of any key customer or key program, or the demands of our key customers, could materially harm our business, results of operations and financial condition.

Our principal end customers include global OEMs that compete in the computing, networking, communications, storage, aerospace, defense, mobile and industrial markets. In fiscal 2019, 2018 and 2017, sales to our ten largest end customers (including sales to contract manufacturers or ODMs at the direction of such end customers) accounted for 73%, 84% and 84% of net sales, respectively. Of our end customers, Samsung (for whom all sales are direct sales) accounted for 18%, 34% and 19% of net sales in fiscal 2019, 2018 and 2017, respectively; Cisco accounted for 11%, 12% and 15% of net sales in fiscal 2019, 2018 and 2017, respectively; Lenovo accounted for 13%, 11% and 11% of net sales in fiscal 2019, 2018 and 2017, respectively; and Dell accounted for 10% of net sales in fiscal 2018. Direct sales to Flex accounted for 17%, 13% and 14% of net sales in fiscal 2019, 2018 and 2017, respectively; and direct sales to Hon Hai accounted for 13% of net sales in fiscal 2017. While Samsung is a significant customer of ours, purchasing eMCPs from us in their smartphone division and DRAM modules from us in their PC division, Samsung’s semiconductor division is also a major supplier and a competitor. See “Risk Factors—Risks Relating to Our Business—Our dependence on a small number of sole or limited source suppliers subjects us to certain risks, including the risk that we may be unable to obtain adequate supplies at a reasonable price and in a timely manner” and “—The memory market is intensely competitive, and we may not be able to maintain or improve our competitive position.”

We expect that sales to relatively few customers will continue to account for a significant percentage of our net sales for the foreseeable future. However, we can provide no assurance that any of these customers or any of our other customers will continue to utilize our products or our services at current levels, or at all. Although we have master agreements with one or more key customers, these agreements govern the terms and conditions of the relationship and do not contain requirements for them to purchase minimum volumes.

Our customer concentration may also subject us to perceived or actual bargaining leverage that our key customers may have, given their relative size and importance to us. Since a large percentage of our sales is to a small number of customers that are primarily large OEMs, these customers are able to exert, have exerted and we expect will continue to exert, pressure on us to make concessions on price and on terms and conditions which can adversely affect our business, results of operations and financial condition. If our key customers seek to negotiate their agreements on terms less favorable to us and we accept such unfavorable terms, such unfavorable terms may have a material adverse effect on our business, results of operations and financial condition. Accordingly, unless and until we diversify and expand our customer base, our future success will significantly depend upon the timing and volume of business from our largest customers and the financial and operational success of these customers. If we were to lose one of our key customers or have a key customer cancel a key program or otherwise significantly reduce its volume of business with us, our sales and profitability would be materially reduced and our business and financial condition would be seriously harmed.

17

The markets that we serve are intensely competitive, and we may not be able to maintain or improve our competitive position.

The markets that we serve are characterized by intense competition. Our competitors include many large domestic and international companies that have substantially greater financial, technical, marketing, distribution and other resources, greater name recognition, broader product lines, lower cost structures and longer-standing relationships with customers and suppliers than we do. As a result, our competitors may be able to respond better to new or emerging technologies or standards and to changes in customer requirements. Further, some of our competitors are in a better financial and marketing position from which to influence industry acceptance of a particular product standard or competing technology than we are. Our competitors may also be able to devote greater resources to the development, promotion and sale of products, and may be able to deliver competitive products at a lower price than we can.

Our primary competitors in the specialty memory market include Viking Technology, ATP, Unigen, Apacer, Swissbit, Innodisk, Virtium and Transcend. In Brazil, we compete against local manufacturers of DRAM modules and local manufacturers of memory ICs, including HT Micron, Adata, Cal Comp and Multilaser.  

We compete globally against semiconductor memory IC manufacturers that also manufacture DRAM ICs and modules and Flash products, including Samsung, Micron, Western Digital, SK Hynix and Toshiba. While these companies generally focus on higher volume commodity products, they sometimes compete with some of our specialty memory products. In addition to competing with certain portions of our product offering, Samsung is also a major supplier and a significant customer. See “Risk Factors—Risks Relating to Our Business—Sales to a limited number of customers represents a significant portion of our net sales, and the loss of any key customer or key program, or the demands of our key customers, could materially harm our business, results of operations and financial condition” and “—Our dependence on a small number of sole or limited source suppliers subjects us to certain risks, including the risk that we may be unable to obtain adequate supplies at a reasonable price and in a timely manner.”

In our supply chain services business, we compete in a fragmented market with a broad set of companies, including distributors and third party logistics providers as well as our customers’ in-house solutions.

Through imports of DRAM components and modules and Flash products, we face some of the same competitors in Brazil as we do elsewhere. We also face competition from local manufacturers of DRAM modules and Flash products, and expect to face more competition in the future from local semiconductor packaging companies, such as Adata Integration Brazil S/A, which began production of its new packaging plant in Brazil in the first half of calendar year 2017. We believe that import duties and local content requirements in Brazil give us an advantage over companies that import DRAM modules or Flash products or import memory components; however, that competitive advantage may become less significant in the event that competitors build manufacturing facilities in Brazil or local content regulations change or are eliminated. As the local market grows, competition may increase in Brazil.

In our Penguin Computing business, we compete with HPE, Dell, Cray (recently announced to be acquired by HPE), and other smaller companies manufacturing computing components and products. We also compete with the direct to customer efforts from several of our large partners including Intel Corporation, or Intel, Quanta Services, Inc., or Quanta, Synnex Corporation, or Synnex, and Super Micro Computer, Inc., or Super Micro.

In our SMART EC products we compete with providers of embedded computing platforms and systems including ADLink, Advantech, Kontron, Curtis Wright, and Mercury Systems. In our SMART Wireless products we compete with providers of SOMs and SBCs including Intrynsic, Thundercomm, and Toradex.

We face competition from existing competitors and expect to face new companies that may enter our existing or future markets with similar or alternative products, which may be less costly or provide additional features. We also face competition from current and prospective customers that evaluate our capabilities against the merits of manufacturing products internally. Competition may also arise due to the development of cooperative relationships among our current and potential competitors and/or suppliers or third parties to increase the ability of their products to address the needs of our prospective customers. Accordingly, it is possible that new competitors or alliances among competitors and/or suppliers may emerge and acquire significant market share.

18

We expect that our competitors will continue to improve the performance of their current products, reduce their prices and introduce new products that may offer greater performance and improved pricing, any of which could cause a decline in sales or market acceptance of our products. In addition, our competitors may develop enhancements to, or future generations of, competitive products that may render our technology or products obsolete or uncompetitive. To remain competitive, we must continue to provide technologically advanced products and manufacturing services, maintain high quality, offer flexible delivery schedules, deliver finished products on a reliable basis, reduce manufacturing and testing costs, and compete favorably on the basis of price. Competitive pressure has led in the past and may continue to lead to intensified price competition resulting in lower net sales and profit margins which could negatively impact our financial performance. Our efforts to maintain and improve our competitive position, or our failure to do so, could have a material adverse effect on our business, results of operations and financial condition.

Industry consolidation and company failures may reduce the number of our potential customers, increase our reliance on our existing key customers and negatively impact the competitiveness of our supplier base.

Many of our customer and supplier markets are characterized by a limited number of large companies. Some participants in the industries in which we serve have merged and/or been acquired, and this trend may continue. In addition, there have been company failures among both our customer and supplier base. Industry consolidation and company failures could decrease the number of potential significant customers for our products and services. Consolidation and company failures in some of our customers’ industries may also result in the loss of customers. The decrease in the number of potential significant customers will increase our reliance on key customers and, due to the increased size of these companies, may negatively impact our bargaining position and thus our profit margins. Furthermore, the loss of, or a relatively reduced relationship with, key customers due to industry consolidation and company failures could negatively impact our business, results of operations and financial condition. Additionally, consolidation and company failures in our supplier base could reduce our purchasing alternatives and reduce the competition for our business resulting in higher cost of goods and less availability of components which would have a negative impact on our business, results of operations and financial condition.

Customer demand is difficult to forecast accurately and, as a result, we may be unable to optimally match purchasing and production to customer demand, which may have a material adverse effect on our business, results of operations and financial condition.

In most cases we do not obtain long-term purchase orders or commitments from our customers but instead we work with our customers to develop non-binding estimates or forecasts of future requirements. Utilizing these non-binding estimates or forecasts, we make significant decisions based on our estimates of customer requirements including determining the levels of business that we will seek and accept, production scheduling, component purchasing and procurement commitments, inventory levels, personnel and production facility needs and other resource requirements. A variety of conditions, both specific to each individual customer and generally affecting each customer’s industry, may cause customers to cancel, reduce or delay orders that were either previously made or anticipated, and often with little or no notice to us. Generally, customers may cancel, reduce or delay purchase orders and commitments without penalty. The short-term and flexible nature of commitments by many of our customers, and the possibility of unexpected changes in demand for their products, reduces our ability to accurately estimate future customer requirements. On occasion, customers may require rapid increases in production, which can challenge our resources and can reduce profit margins. We may not have sufficient capacity at any given time to meet our customers’ demands. Downturns in the markets in which our customers compete can, and have, caused our customers to significantly reduce the amount of products ordered from us or to cancel or delay existing orders leading to lower utilization of our facilities. This in turn can cause us to have more inventory than we need and can result in inventory write-downs or write-offs. Additionally, as many of our costs and operating expenses are relatively fixed, reduction in customer demand would have an adverse effect on our operating income, results of operations and financial condition.

19

We may experience inventory write-downs or write-offs.

To the extent we manufacture products or make purchases in anticipation of future demand that does not materialize, or in the event a customer cancels or reduces outstanding orders, we could experience an unanticipated increase in our inventory. We have had in the past and expect we could again have in the future, inventory write-downs and/or write-offs due to obsolescence, excess quantities and declines in market value below our costs. In particular, if product obsolescence causes product demand to decrease or we fail to forecast demand accurately, we could be required to write-off inventory or record under-utilization charges, which would have a negative impact on our profit margins and our profitability. Any one or more of these occurrences could have a negative impact on our results of operations and financial condition. Our inventory write-downs were $9.0 million, $5.2 million and $2.8 million for fiscal 2019, 2018 and 2017, respectively.

In connection with delivering our supply chain services, we make significant inventory purchases based on customer forecasts and/or customer purchase orders. In most instances, forecasts are non-binding and purchase orders can be rescheduled at the customer’s option, often times without penalty. When actual consumption does not meet the customer’s forecast or the customer’s purchase orders, it will result in unanticipated and sometimes significant increases in our inventory. Additionally, some of our logistics transactions contemplate extended periods of inventory management. These programs generally obligate customers to eventually purchase certain aged logistics inventory with minimal right to price reductions, and typically provide for periodic carrying charges. We can provide no assurance, however, that the customers will comply with these obligations. If a customer of our supply chain services has significant delays in delivery of inventory, this could have a negative impact on our profitability. If a customer of our supply chain services fails to consume the inventory that we purchase for it, this could result in significant inventory write-downs or write-offs. Any one or more of these occurrences could have a significant negative impact on our cash flows, business, results of operations and financial condition. At the end of each of the last four fiscal quarters, logistics inventory (including inventory specifically requested by customers) ranged between 22% and 27% of our total inventory.

New product development requires significant investment. Our failure to develop new or enhanced products and introduce them in a timely manner would undermine our competitiveness.

The markets that we serve are subject to rapid technological change, product obsolescence, frequent new product introductions and feature enhancements, changes in end-user requirements and evolving industry standards. Our ability to successfully compete and to continue to grow our business depends in significant part upon our ability to develop, introduce and sell new and enhanced products on a timely and cost-effective basis, and to anticipate and respond to changing customer requirements. We have experienced, and may experience in the future, delays and unanticipated expenses in the development and introduction of new products. A failure to develop products with required feature sets or performance standards, or a delay as short as a number of weeks in bringing a new product to market could significantly reduce our return on investment as well as our net sales, all of which would have a material adverse effect on our business, results of operations and financial condition.

Delays in the development, introduction and qualification of new products could provide a competitor a first-to-market advantage and allow a competitor to achieve greater market share. These delays could also result in customers having the right to cancel orders without penalty. Defects or errors found in our products after sampling or commencement of commercial shipments could result in delays in market acceptance of our products. Lack of market acceptance for our new products for any reason would jeopardize our ability to recoup substantial research and development expenditures, hurt our reputation and have a material adverse effect on our business, results of operations and financial condition. Accordingly, we can provide no assurance that our future product development efforts will be successful or result in products that gain market acceptance.

We have invested in the past and expect in the future to invest in new technologies and emerging markets. If these new technologies and emerging markets fail to gain acceptance or to grow, it would have a material adverse effect on our business, results of operations and financial condition. We have made and expect to continue to make significant investments in various products. There is significant competition in the markets for these markets and we can provide no assurance that we will develop and introduce products in a timely manner or that our new products will gain market acceptance, be price competitive or result in any significant increase in our net sales. If these investments fail to provide the expected returns, then such failure would have a material adverse effect on our business, results of operations and financial condition.

20

Our OEM customers require that our products undergo a lengthy and expensive process of evaluation and qualification without any assurance of net sales.

Our products are often incorporated into our OEM customers’ systems at the design stage. As a result, we rely on OEMs to select our product designs, which we refer to as design wins, and then to qualify our products for production buys. We often incur significant expenditures in the development of a new product without any assurance that any OEM will select our product for design into its system. Additionally, in some instances, we are dependent on third parties to obtain or provide information that we need to achieve a design win. These third parties may not supply this information to us on a timely basis, if at all. Furthermore, even if an OEM designs one of our products into its system, we cannot be assured that they will qualify or use our product in production, that the OEM’s product will be commercially successful or that we will receive significant orders as a result of that design win or qualification. Generally, our OEM customers are not obligated to purchase our products even if we get a design win. If we are unable to achieve design wins or if our OEM customers’ systems incorporating our products are not commercially successful, it could have a material adverse effect on our business, results of operations and financial condition.

In addition, because the qualification process is both product-specific and platform-specific, our existing customers sometimes require us to requalify our products, or to qualify our new products, for use in new platforms or applications. For example, as our OEM customers transition from third generation double date-rate, or DDR3, DRAM architectures, or fourth generation DDR, or DDR4, DRAM architectures, we must design and qualify new products for use by those customers. In the past, the process of design and qualification has taken several months to complete, during which time our net sales to those customers declined significantly. After our products are qualified, it can take several months before the customer begins production and we begin to generate net sales from such customer.

Likewise, when our suppliers discontinue production of components, it may be necessary for us to design and qualify new products for our customers. Such customers may require of us or we may decide to purchase an estimated quantity of discontinued memory components necessary to ensure a steady supply of existing products until products with new components can be qualified. Purchases of this nature may affect our liquidity. Additionally, our estimation of quantities required during the transition may be incorrect, which could adversely impact our results of operations through lost revenue opportunities or charges related to excess and obsolete inventory.

We must devote substantial resources, including design, engineering, sales, marketing and management efforts, to qualify our products with prospective customers in anticipation of sales. Significant delays in the qualification process could result in an inability to keep up with rapid technological change or new, competitive technologies. If we delay or do not succeed in qualifying a product with an existing or prospective customer, we will not be able to sell that product to that customer, which may result in us losing potential revenue and holding excess or obsolete inventory, any of which may have a material adverse effect on our business, results of operations and financial condition.

If our OEM customers decide to utilize a standardized memory solution instead of our specialty memory products, our net sales and market share may decline.

Many of our specialty memory products are specifically designed for our OEM customers’ systems. In an effort to reduce costs and assure supply of their memory module requirements, a number of our OEM customers design commodity JEDEC-standard DRAM modules into their products. Although we also manufacture JEDEC-standard modules, an increase in such efforts by our customers could reduce the demand for our higher priced specialized or customized memory solutions, which in turn would have a negative impact on our business, results of operations and financial condition. In addition, when customers utilizing custom memory solutions choose to adopt a JEDEC-standard instead of a custom module, new competitors producing standardized memory modules may take a portion of our customers’ business previously purchased from us.

21

Our dependence on a small number of sole or limited source suppliers subjects us to certain risks, including the risk that we may be unable to obtain adequate supplies at reasonable prices and in a timely manner.

We are dependent upon a small number of sole or limited source suppliers for certain materials, including certain critical components, we use in manufacturing our products. We purchase almost all of our materials from our suppliers on a purchase order basis and generally do not have long-term commitments from suppliers. Our suppliers are not required to supply us with any minimum quantities and there is no assurance that our suppliers will supply the quantities of components we may need to meet our production goals. In our specialty memory products, our major suppliers include Samsung, Micron and SK Hynix. These suppliers also compete with us in the memory market. For example, while Samsung, Micron and SK Hynix all sell DRAM modules to us, and Samsung and Micron supply us with DRAM ICs, Flash ICs and finished products, they also compete with us by selling DRAM ICs and modules and Flash ICs and finished products to many of our customers, usually focusing on higher volume commodity products. Samsung is also a significant customer, as Samsung’s smartphone division purchases eMCPs from us, and its PC division purchases DRAM modules from us.

In Brazil, we purchase the wafers used in our memory products exclusively from a single global memory wafer supplier. The target volume and pricing of wafers are established annually, and our purchases are generally made monthly on a purchase order basis and are not cancelable. In the event that our wafer supply relationship or our purchase orders are terminated, or if our supplier’s production of silicon wafers is reduced or disrupted, we may be unable to obtain sufficient quantities of high-quality wafers at reasonable prices, and in a timely manner, to fulfill our Brazilian customers’ requirements. In addition, there can be no assurance that we will reach agreement with our wafer supplier on the pricing and quantities of wafers that they will supply and we will purchase.

The markets in which we operate have experienced, and may experience in the future, shortages in components, including DRAM and Flash ICs, which are essential components of our memory products. These shortages cause some suppliers to place their customers, including us, on component allocation. As a result, we may not be able to obtain the components that we need to fill customer orders. If any of our suppliers experience quality control or intellectual property infringement problems, we may not be able to fill customer orders. Furthermore, our products that utilize that supplier’s components may be disqualified by one or more of our customers and we may not be able to fill their orders.

The inability to fill customer orders due to shortages or long lead-times from suppliers could cause delays, customer cancellations, disruptions or reductions in product shipments or require costly product redesigns and/or re-qualifications which could, in turn, damage relationships with current or prospective customers, increase costs and have a material adverse effect on our business, results of operations and financial condition.

A disruption in or termination of our supply relationship with any of our significant suppliers or our inability to develop relationships with new suppliers, if required, would cause delays, disruptions or reductions in product manufacturing and shipments or require product redesigns which could damage relationships with our customers, increase our costs or the prices we need to charge for our products and could materially and adversely affect our business, results of operations and financial condition.

Unless we maintain manufacturing efficiency, we may not remain profitable and our future profitability could be materially adversely affected.

The memory industry is characterized by constant and rapid technological changes and product obsolescence. For example, new manufacturing process technologies using smaller feature sizes and offering better performance characteristics are generally introduced every one to two years. The introduction of new manufacturing process technologies allows us to increase the functionality of our products while at the same time optimizing performance parameters, decreasing power consumption and/or increasing storage capacity. In order to remain competitive, it is essential that we secure the capabilities to develop and qualify new manufacturing process technologies. If we are delayed in transitioning to new technologies, our business, results of operations and financial condition could be materially adversely affected.

If the lifecycle of a product is shortened as a result of the introduction of a new technology, we may be forced to transition our manufacturing capabilities to a new configuration more quickly than originally planned. This can result in increased capital and other expenditures. This can also cause decreases in demand for the older technology products and our manufacturing or assembly and test capacity to be under-utilized. As a result, we may be required to record an impairment on our long-lived assets, including facilities and equipment, as well as intangible assets, which would increase our expenses. When new technologies are introduced, the capacity to manufacture the new products often cannot meet the demand and product shortages can arise. If our suppliers cannot support such demand, we may not be able to fill customer orders or participate in new markets as they emerge.

22

Our manufacturing efficiency can significantly affect our results of operations, and we cannot be sure that we will be able to maintain or increase our manufacturing efficiency to the same extent as our competitors. We continuously modify our manufacturing processes in an effort to improve yields and product performance and decrease costs. During periods when we are implementing new process technologies, manufacturing facilities may not be fully productive and may experience higher than acceptable defect rates. We may fail to achieve acceptable yields or may experience product delivery delays as a result of, among other things, capacity constraints, delays in the development of new process technologies, increased defect rates, changes in our process technologies, upgrades or expansion of existing facilities, impurities or other difficulties in the manufacturing process. Any of these occurrences could adversely impact our relationships with customers, cause harm to our reputation in the marketplace, cause customers to move future business to our competitors or cause us to make financial concessions to our customers. Improving our manufacturing efficiency in future periods is dependent on our ability to:

Disruption of our operations at our manufacturing facilities would substantially harm our business.

A disruption at one of our manufacturing facilities could adversely impact our manufacturing operations and consequently our customer relations and our business. Such a disruption could result from, among other things, sustained process abnormalities, government intervention, waste disposal issues, power failures or other circumstances, or from ramp-up related challenges, such as obtaining sufficient raw materials, hiring of qualified factory personnel, installation and efficient operation of new equipment and management and coordination of our logistics networks within our global operations. We maintain insurance to protect against certain claims associated with business interruption, however, our insurance may not cover all or any part of a particular loss. Since a large percentage of our production is done in a small number of facilities, a disruption to operations, or a loss that is in excess of, or excluded from, our insurance coverage could adversely impact our business, results of operations and financial condition.

We are subject to a number of procurement laws and regulations. Our business and our reputation could be adversely affected if we fail to comply with these laws.

With respect to a portion of our business, we must comply with and are affected by laws and regulations relating to the award, administration and performance of government contracts in the U.S. and other countries. Government contract laws and regulations affect how we do business with our customers and impose certain risks and costs on our business. A violation of specific laws and regulations, by us, our employees, others working on our behalf, a supplier or a venture partner, could harm our reputation and result in the imposition of fines and penalties, the termination of our contracts, suspension or debarment from bidding on or being awarded contracts, loss of our ability to export products or services and civil or criminal investigations or proceedings. In some instances a government agency may terminate any of our government contracts and subcontracts either at its convenience or for default based on our performance. A termination arising out of our default may expose us to liability including for excess costs incurred by the customer in procuring undelivered services and solutions from another source and such termination may have a material adverse effect on our ability to compete for future contracts and orders. In addition, on those contracts for which we are teamed with others and are not the prime contractor, the government could terminate a prime contract under which we are a subcontractor, notwithstanding the quality of our services as a subcontractor. In the case of termination for default, the government could make claims to reduce the contract value or recover its procurement costs and could assess other special penalties. Government agencies routinely audit and investigate government contractors. These agencies review a contractor’s performance under its contracts, its cost structure, its business systems and compliance with applicable laws, regulations and standards. Certain government

23

agencies have the ability to decrease or withhold certain payments when it deems systems subject to its review to be inadequate. Additionally, any costs found to be misclassified may be subject to repayment. If an audit or investigation uncovers improper or illegal activities, we may be subject to civil or criminal penalties and administrative sanctions, including reductions of the value of contracts, contract modifications or terminations, forfeiture of profits, suspension of payments, penalties, fines and suspension, or prohibition from doing business with the government. In addition, we could suffer serious reputational harm if allegations of impropriety were made against us. Similar government oversight exists in most other countries where we conduct business.

The U.S. government may terminate, cancel, modify or curtail our contracts at any time and, if we do not replace them, we may be unable to achieve or sustain revenue growth and may suffer a decline in revenues and profitability.

Certain of the U.S. government programs in which we participate as a contractor or subcontractor may extend for several years and include one or more base years and one or more option years. Under some contracts, the government generally has the right not to exercise options to extend or expand our contracts and may otherwise terminate, cancel, modify or curtail our contracts at its convenience. Any decision by a government agency not to exercise contract options or to terminate, cancel, modify or curtail any major programs or contracts would adversely affect our revenues, revenue growth and profitability. We may experience and continue to experience periodic performance issues under certain of our contracts. Depending on the nature and value of the contract, a performance issue or termination for default could cause our actual results to differ from those anticipated and could harm our reputation and our operating results and financial condition.

If our products are defective or are used in defective systems, we may be subject to warranty, product recalls or product liability claims.

If our products are defectively manufactured, contain defective components or are used in defective or malfunctioning systems, we could be subject to warranty and product liability claims and product recalls, safety alerts or advisory notices. While we have product liability insurance coverage, it may not be adequate to satisfy claims made against us. We also may be unable to obtain insurance in the future at satisfactory rates or in adequate amounts. Warranty and product liability claims or product recalls, regardless of their ultimate outcome, could have an adverse effect on our business, financial condition and reputation, and on our ability to attract and retain customers. In addition, we may determine that it is in our best interest to accept product returns in circumstances where we are not contractually obligated to do so to maintain good relations with our customers. Accepting product returns may adversely impact our results of operations and financial condition.

Cyber attacks or other data security incidents that disrupt our operations or result in the breach or other compromise of proprietary or confidential information about our company, our workforce, our customers, or other third parties could disrupt our business, harm our reputation, cause us to lose customers, and expose us to costly regulatory enforcement and litigation.

We may manage, store, transmit and otherwise process various proprietary information and sensitive personal or confidential data. In addition, our cloud computing businesses routinely process, store and transmit data, including sensitive and personally identifiable information, for our customers. We may experience breaches or other compromises of the information technology systems we use for these purposes, as criminal or other actors may be able to penetrate our network security and misappropriate or compromise our information or that of third parties, create system disruptions or cause shutdowns. There are numerous and evolving risks to cybersecurity and privacy, including criminal hackers, hacktivists, state-sponsored intrusions, industrial espionage, employee malfeasance, and human or technological error. Computer hackers and others routinely attempt to breach the security of technology products, services and systems, and to fraudulently induce employees, customers, and other third parties to disclose information or unwittingly provide access to systems or data. The risk of such attacks includes attempted breaches not only of our own products, services and systems, but also those of customers, contractors, business partners, vendors and other third parties. Our products, services and systems may be used in critical company, customer, government or other third-party operations, or involve the storage, processing and transmission of sensitive data, including valuable intellectual property, classified information, other proprietary or confidential data, regulated data, and personal information of employees, customers and others. Successful breaches, employee malfeasance, or human or technological error could result in, for example, unauthorized access to, disclosure, modification, misuse, loss, or destruction of company, customer, government or other third party data or systems; theft of sensitive, regulated, classified or confidential data including personal information and intellectual property; the loss of access to critical data or systems through ransomware, destructive attacks or other means; and business delays, service or system disruptions or denials of service. Further, hardware and operating system software and applications that we produce or procure from third parties may contain defects in design or manufacture, including "bugs" and other problems that could unexpectedly interfere with the operation of such systems.

24

The costs to address product defects or any of the foregoing security problems and security vulnerabilities before or after a cyber incident could be significant. Remediation efforts may not be successful and could result in interruptions, delays, or cessation of service, and loss of existing or potential customers that may impede our sales, manufacturing, distribution, or other critical functions. We could lose existing or potential customers for outsourcing services or other information technology solutions in connection with any actual or perceived security vulnerabilities in our products. In addition, breaches of our security measures and the unapproved dissemination of proprietary information or sensitive or confidential data about us or our customers or other third parties could expose us, our customers, or other third parties affected to a risk of loss or misuse of this information, result in regulatory enforcement, litigation and potential liability, damage our brand and reputation, or otherwise harm our business. Further, we rely in certain limited capacities on third-party data management providers and other vendors whose possible security problems and security vulnerabilities may have similar detrimental effects on us.

We are subject to laws, rules, and regulations in the United States and other countries relating to the collection, use, transmission, processing and security of user and other data. Our ability to execute transactions and to possess, process, transmit and use personal information and data in conducting our business subjects us to legislative and regulatory burdens that, among other things, may require us to notify regulators and customers, employees, or other individuals of a data security breach, including in the EU and the European Economic Area where the General Data Protection Regulation, or GDPR, took effect in May 2018. We have incurred, and will continue to incur, significant expenses to comply with mandatory privacy and security standards and protocols imposed by law, regulation, industry standards, or contractual obligations, but despite such expenditures may face regulatory and other legal actions in the event of a data breach or perceived or actual non-compliance with such requirements. The GDPR imposes significant obligations and compliance with these obligations depends in part on how particular regulators apply and interpret them. If we fail to comply with the GDPR, or if regulators assert we have failed to comply with the GDPR, it may lead to regulatory enforcement actions, which can result in monetary penalties of up to 4% of worldwide revenue, private lawsuits, or reputational damage.

Open source development and licensing practices may limit the value of our SCSS software assets. If open source programmers do not continue to develop and enhance open source technologies, we may be unable to develop new technologies, adequately enhance our existing technologies or meet customer requirements for innovation, quality and price.

Many of our SCSS offerings, including Linux-based products, are built primarily from software components licensed under various open source licenses. While some components are developed by our employees, we obtain many components from software developed and released by contributors to independent open source software development projects. Open source licenses grant licensees broad permissions to use, copy, modify and redistribute the software. Certain open source licenses, such as the GNU General Public License, impose significant limits on our ability to license derivative works under more restrictive terms and generally require us to disclose the source code of such works. The inclusion of software components governed by such licenses in our offerings may limit our ability to use traditional proprietary software licensing models for those offerings. As a result, while we may have substantial copyright interests in our software technologies, open source development and licensing practices may have the effect of limiting the value of our software copyright assets. If open source programmers fail to adequately further develop and enhance open source technologies, we would have to rely on other parties to develop and enhance our offerings or we would need to develop and enhance our offerings with our own resources. We cannot predict whether further developments and enhancements to these technologies would be available from reliable alternative sources. Moreover, if third-party software programmers fail to adequately further develop and enhance open source technologies, the development and adoption of these technologies could be stifled and our offerings could become less competitive. Delays in developing, completing or delivering new or enhanced offerings could result in delayed or reduced revenue for those offerings and could also adversely affect customer acceptance of those offerings.

25

Because of the characteristics of open source software, there are few technology barriers to entry into the open source market by new competitors and it may be relatively easy for competitors, some of which may have greater resources than we have, to enter our markets and compete with us.

One of the characteristics of open source software is that anyone may modify and redistribute the existing open source software and use it to compete with us. Such competition can develop without the degree of overhead and lead time required by traditional proprietary software companies. It is possible for competitors with greater resources than ours to develop their own open source solutions or acquire a smaller business that has developed open source offerings that compete with our offerings, potentially reducing the demand for, and putting price pressure on, our offerings. In addition, some competitors make their open source software available for free download and use on an ad hoc basis or may position their open source software as a loss leader. We cannot guarantee that we will be able to compete successfully against current and future competitors or that competitive pressure and/or the availability of open source software will not result in price reductions, reduced operating margins and loss of market share. Additionally, any failure by us to provide high-quality technical support, or the perception that we do not provide high-quality technical support, could harm our reputation and negatively impact our ability to sell subscriptions for our open source offerings to existing and prospective customers. If we are unable to differentiate our open source offerings from those of our competitors or compete effectively with other open source offerings, our business, financial condition, operation results and cash flows could be adversely affected.

In our SCSS business, we regularly contribute software source code under open source licenses and have made other technology we developed available under other open licenses, and we include open source software in our products. For example, we have contributed certain technology related to our products to the Open Compute Project Foundation, a non-profit entity that shares and develops such information with the technology community, under the Open Web Foundation License. As a result of our open source contributions and the use of open source in our products, we may license or be required to license or disclose code and/or innovations that turn out to be material to our business and may also be exposed to increased litigation risk. As a result of making certain of our technology available to third parties, the value of our brands and other intangible assets may be diminished and competitors may be able to more effectively mimic our products, services, and methods of operations which could have an adverse effect on our business and financial results. Likewise, if the protection of our proprietary rights is inadequate to prevent unauthorized use or appropriation by third parties, the value of our brands and other intangible assets may be diminished and competitors may be able to more effectively mimic our products, services, and methods of operations. Any of these events could have an adverse effect on our business and financial results.

We could be prevented from selling or developing our software if the GNU General Public License and similar licenses under which our technologies are developed and licensed are not enforceable or are modified so as to become incompatible with other open source licenses.

A number of our SCSS offerings have been developed and licensed under the GNU General Public License and similar open source licenses. These licenses state that any program licensed under them may be liberally copied, modified and distributed. It is possible that a court would hold these licenses to be unenforceable or that someone could assert a claim for proprietary rights in a program developed and distributed under them. Additionally, if any of the open source components of our offerings may not be liberally copied, modified or distributed, then our ability to distribute or develop all or a portion of our offerings could be adversely impacted. In addition, licensors of open source software employed in our offerings may, from time to time, modify the terms of their license agreements in such a manner that those license terms may become incompatible with other open source licenses in our offerings or our end user license agreement, and thus could, among other consequences, prevent us from distributing the software code subject to the modified license.

Our indemnification obligations to our customers and suppliers for product defects, intellectual property infringement and other matters could require us to pay substantial damages.

A number of our product sales and product purchase agreements provide that we will defend, indemnify and hold harmless our customers and suppliers from damages and costs which may arise from various matters including, without limitation, product warranty claims or claims for injury or damage resulting from defects in, or usage of, our products or the products of our suppliers. In addition, we currently have in effect a number of agreements in which we agree to defend, indemnify and hold harmless our customers and suppliers from damages and costs which may arise from the infringement or alleged infringement by our products of third-party patents, trademarks or other intellectual property rights. We periodically have to respond to claims and may have to litigate indemnification obligations in the future.

26

Indemnification obligations could require us to expend significant amounts of money to defend claims and/or to pay damages or settlement amounts. We maintain insurance to protect against certain claims associated with the use of our products; however, our insurance may not cover all or any part of a claim asserted against us. Our insurance does not cover intellectual property infringement in most instances. A claim brought against us that is in excess of, or excluded from, our insurance coverage could adversely impact our business, results of operations and financial condition.

Certain of our products are used in transportation safety devices and a product failure could result in significant losses.

Certain of our products are used in transportation safety devices in the rail industry. These products are certified by independent auditors to safety integrity level, or SIL, 4 standards and are subsequently integrated into larger systems designed by our OEM customers and then go through rigorous testing and additional certification processes. In the event that our products fail to perform as expected, accidents and significant losses could occur. While our contracts for the sale of these products typically contain disclaimers, there can be no assurance that we would be insulated from liability in the event of an accident. Additionally, in the event of an accident, even if our product is ultimately determined not to be at fault, the costs of an investigation could be substantial.

We may need to raise additional funds, which may not be available on acceptable terms or at all.

We may need to raise additional funds, which we may seek to obtain through, among other things, public or private equity offerings and debt financings. Our future capital requirements will depend on many factors, including, without limitation, our levels of net sales, our levels of inventory, the timing and extent of expenditures to support research and development activities, the expansion of manufacturing and test capacity and the continued market acceptance of our products. Additional funds may not be available on terms acceptable to us, or at all. If we issue equity or convertible debt securities to raise additional funds, our existing shareholders may experience dilution and the new equity or debt securities may have rights, preferences, and privileges senior to those of our then existing shareholders. If we incur additional debt, it may increase our leverage relative to our earnings or to our equity capitalization, as well as impose financial and operating covenants that could restrict the operations of our business. In addition, our existing indebtedness may limit our ability to obtain additional financing in the future, as discussed in greater detail below under “—Risks Relating to our Debt—Our indebtedness could impair our financial condition and harm our ability to operate our business.”

In fiscal 2019, 2018 and 2017, we spent $33.4 million, $25.7 million and $18.7 million, respectively, on capital expenditures, which we used, among other things, to expand manufacturing and test capacity as well as research and development. We plan to continue to make capital expenditures in the future. If our expected returns on these investments are not achieved, it could adversely impact our business, results of operations and financial condition.

In fiscal 2019, we spent $76.1 million to acquire SMART EC, SMART Wireless and Premiere Logistics and in fiscal 2018, we spent $45.1 million to acquire Penguin Computing. We plan to continue exploring additional acquisition opportunities in the future. If our expected returns on these transactions are not achieved, it could adversely impact our business, results of operations and financial condition.

If adequate capital is not available when needed, we may be required to modify our business model and operations to reduce spending. This could cause us to be unable to execute our business plan, take advantage of future opportunities or respond to competitive pressures or customer requirements. It may also cause us to delay, scale back or eliminate some or all of our research and development programs, or to reduce or cease operations, which could adversely impact our business, results of operations and financial condition.

We have in the past and may in the future make acquisitions of companies and/or technologies which involve numerous risks. If we are not successful in integrating the technologies, operations and personnel of acquired businesses or fail to realize the anticipated benefits of an acquisition, our business, results of operations and financial condition may be adversely affected.

As part of our business and growth strategy, we have in the past and may in the future acquire or make significant investments in businesses, products or technologies, such as our acquisitions of Penguin Computing, SMART EC and SMART Wireless, in an effort to complement our existing product offering, expand our market coverage, increase our engineering workforce or enhance our technological capabilities. Any acquisitions or investments would expose us to the risks commonly encountered in acquisitions of businesses or technologies. Such risks include, among others:

27

Problems encountered in connection with an acquisition could divert the attention of management, utilize scarce corporate resources and otherwise harm our business. If we make any future acquisitions, we could issue ordinary shares that would dilute our existing shareholders’ percentage ownership, incur substantial additional debt, expend cash and reduce our cash reserves or assume additional liabilities. Furthermore, acquisitions may require material charges and could result in adverse tax consequences, substantial depreciation, deferred compensation charges, liabilities under earn-out provisions, the amortization of amounts related to deferred compensation and identifiable purchased intangible assets or impairment of goodwill or other intangibles, any of which could negatively impact our business, results of operations and financial condition. We are unable to predict whether or when any prospective acquisition candidate will become available or the likelihood that any acquisition will be completed. We may expend significant resources and management time pursuing an acquisition that we are unable to consummate. Even if we do find suitable acquisition opportunities, we may not be able to consummate the acquisitions on commercially acceptable terms or at all, or may not realize the anticipated benefits of any acquisitions we do undertake. Our investments in private companies are subject to risk of loss of investment capital. These investments are inherently risky because the markets for the technologies or products they may have under development are typically in the early stages and may never materialize. We could lose our entire investment in these companies.

In connection with the sale of our storage business, we agreed to indemnify SanDisk against specified losses.

In August 2013, we completed the sale of substantially all of the business unit which was focused on solid state drives, which we referred to as the Storage Business, to SanDisk (now a part of Western Digital) for approximately $304 million in cash, subject to certain escrows and holdbacks. The sale agreement for the Storage Business, or the Sale Agreement, contained certain indemnification obligations that are typical for transactions of this nature, including, among others, for losses arising from breaches of our representations and warranties relating to the sale, as well as for taxes arising with respect to pre-closing tax periods. These indemnification obligations are subject to a number of limitations, including certain deductibles and caps and limited time periods for making indemnification claims. On August 21, 2014, SanDisk made a claim against us under the indemnification provisions of the Sale Agreement in connection with a lawsuit filed by Netlist, Inc., or Netlist, against SanDisk alleging that certain products of the Storage Business that we sold to SanDisk, infringe various Netlist patents, which SanDisk in turn alleges would, if true, constitute a breach of representations and warranties under the Sale Agreement. Under the Sale Agreement, our indemnification obligation in respect of intellectual property matters, including those claimed by SanDisk, is subject to a deductible of approximately $1.8 million and a cap of $60.9 million. The SanDisk claim included what purported to be an estimate of SanDisk’s alleged indemnifiable losses that is greater than the cap in the Sale Agreement for intellectual property matters.

We believe that the allegations giving rise to the indemnification claim are without merit and we intend to dispute SanDisk’s claim for indemnification. In addition, there may be other grounds for us to dispute the indemnification claim and/or the amounts of any indemnifiable losses of SanDisk. While we believe that the infringement claims are without merit, we can provide no assurance that SanDisk will be successful in defending the infringement claims or that we will otherwise be successful in disputing the indemnification claim and/or the amount of indemnifiable losses. In addition to the infringement claim described above, we continue to have an obligation to indemnify SanDisk for certain specified matters, including tax obligations for pre-closing tax periods, some of which indemnification obligations are capped at certain amounts and survive for periods of time set forth in the Sale Agreement. An indemnity claim brought against us by SanDisk, including the claim described above, could have a material adverse effect on our business, results of operations and financial condition.

28

Our future success is dependent on our ability to retain key personnel, including our executive officers, and to attract qualified personnel. If we lose the services of these individuals or are unable to attract new talent, our business may be adversely affected.

Our future operating results depend in significant part upon the continued contributions of our key senior management and technical personnel, many of whom would be difficult to replace. We are particularly dependent on the continued service of Ajay Shah, our Chairman, President and Chief Executive Officer, and Jack Pacheco, our Executive Vice President, Chief Operating Officer and Chief Financial Officer. Our future operating results also depend in significant part upon our ability to attract, train and retain qualified management, including for manufacturing and quality assurance, engineering, design, finance, marketing, sales and support personnel. We are continually recruiting such personnel in various parts of the world. However, competition for such personnel can be strong and we can provide no assurance that we will be successful in attracting or retaining such personnel now or in the future. In addition, particularly in the high-technology industry, the value of stock options, restricted stock units (RSUs), grants or other share-based compensation is an important element in the retention of employees. Declines in the value of our ordinary shares could adversely affect our ability to retain employees and we may have to take additional steps to make the equity component of our compensation packages more attractive to attract and retain employees. These steps could result in dilution to shareholders.

In Brazil in particular, there is limited availability of labor with the technical skills required for our operations. As a result, we rely heavily on our ability to train personnel or relocate individuals from outside of the country. Relocation from a foreign country is expensive. To keep pace with our anticipated growth in Brazil, we anticipate the need to increase the number of our technical personnel. Additionally, to meet the obligations associated with certain tax incentives, we are required to invest in research and development activities which could require an increase in engineering and other technical personnel. To the extent that competitors enter or expand in the local market, our labor force could be targeted, which could result in the loss of personnel and/or the increase in wages to retain personnel.

The loss of any key employee, the failure of any key employee to adequately perform in his or her current position, our inability to attract, train and retain skilled employees as needed or the inability of our key employees to expand, train and manage our employee base as needed, could have a material adverse effect on our business, results of operations and financial condition.

We rely, in part, on third-party sales representatives to assist in selling our products, and the failure of these representatives to perform as expected could reduce our future sales.

Sales of our products to some of our OEM customers are accomplished, in part, through the efforts of third-party sales representatives. We are unable to predict the extent to which these third-party sales representatives will be successful in marketing and selling our products. Moreover, many of these third-party sales representatives also market and sell competing products and may more aggressively pursue sales of our competitors’ products. Our third-party sales representatives may terminate their relationships with us at any time on short or no notice. Our future performance may also depend, in part, on our ability to attract and retain additional third-party sales representatives that will be able to market and support our products effectively, especially in markets in which we have not previously sold our products. If we cannot retain our current third-party sales representatives or recruit additional or replacement third-party sales representatives or if these sales representatives are not effective, it could have a material adverse effect on our business, results of operations and financial condition.

If we are unable to protect our intellectual property, our operating results may be adversely affected.

Our success is dependent, in part, upon protecting our intellectual property rights. We rely on a combination of trade secrets, know-how, trademarks, copyright and, to a lesser extent, patents. We do not own or apply for patents in respect of the majority of our products. The absence of patent protection for most of our products means that we cannot prevent our competitors from reverse-engineering and duplicating our products.

29

We believe that our continued success depends largely on the technical expertise we have developed in manufacturing and designing products, and we rely on confidential proprietary information, including trade secrets and know-how to develop and maintain our competitive position. Any disclosure to or misappropriation by third parties of our confidential proprietary information could enable competitors to quickly duplicate or surpass our technological achievements, thus eroding our competitive position in our market. We seek to protect our confidential proprietary information, in part, by confidentiality and non-disclosure agreements and invention assignment agreements with our employees, consultants, advisors, contractors and collaborators. These agreements are designed to protect our proprietary information, however, we cannot be certain that such agreements have been entered into with all relevant parties, and we cannot be certain that our trade secrets and other confidential proprietary information will not be disclosed or that competitors will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. For example, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. We also seek to preserve the integrity and confidentiality of our confidential proprietary information by maintaining physical security of our premises and physical and electronic security of our information technology systems, but it is possible that these security measures could be breached. If any of our confidential proprietary information were to be lawfully obtained or independently developed by a competitor, we would have no right to prevent such competitor from using that technology or information to compete with us, which could harm our competitive position.

It is possible that our efforts to protect our intellectual property rights may not:

If any of our issued patents are found to be invalid or if any of our patent applications are rejected, our ability to exclude competitors from making, using or selling the same or similar products as us could be compromised. In addition, because we conduct a substantial portion of our operations and sell a large percentage of our products outside the United States, we have exposure to intellectual property risks from operating in foreign countries, many of which have laws that may not adequately protect our intellectual property rights.

Activities in the area of intellectual property rights, including litigation and various patent processes can cause us to incur substantial expenses. We are currently involved in contested proceedings, which may result in decisions against us.

The markets in which we compete are characterized by frequent claims alleging misappropriation of trade secrets or infringement of patents, trademarks, copyrights or other intellectual property rights of others. From time to time, third parties may assert against us or our customers alleged infringement of such intellectual property rights on technologies that are important to our business. We can provide no assurance that third parties will not in the future pursue claims against us or our customers with respect to the alleged infringement of intellectual property rights. In addition, litigation or other legal and technical processes may be necessary to protect our intellectual property rights, to determine the validity and scope of the proprietary rights of others or to defend against third party claims of infringement and/or invalidity. Litigation and other legal and administrative processes, whether as plaintiff, defendant, or otherwise, could result in substantial costs and diversion of resources and management attention and could have a material adverse effect on our business, results of operations and financial condition, whether or not such litigation or other processes are ultimately determined in our favor. In the event of an adverse result in, or a settlement of, a litigation matter, we could be required to pay substantial damages or settlement amounts; cease the manufacture, use, import and sale of certain products or components; expend significant resources to develop or acquire rights to use non-infringing technology; and/or discontinue the use of certain processes or obtain licenses

30

and pay one-time fees and/or on-going royalties to use the infringing or allegedly infringing technology. The occurrence of any of the foregoing could result in unexpected expenses or require us to recognize an impairment of our assets, which would reduce the value of our assets and increase our expenses. Alternate technology development or license negotiations would likely result in significant expenses and divert the efforts of our technical and management personnel. We cannot assure that we would be successful in such development or negotiations. Moreover, there could be public announcements of the results of interim proceedings or developments. If securities analysts or investors perceive these announcements or results to be negative, it could have a substantial adverse effect on the price of our ordinary shares.

As we increase our sales, develop more technology and expand our product offerings, the possibility of being involved in more intellectual property contests grows. Increased intellectual property contests could have a material adverse effect on our business, results of operations and financial condition.

We may not have rights to manufacture and sell particular products that we currently offer, or we may be required to pay a royalty to sell certain products.

The memory, storage and compute markets are constantly undergoing rapid technological change and evolving industry standards. From time to time, third parties may claim that we are infringing upon technology to which they have proprietary rights and that we require a license to manufacture and/or sell certain of our products. If we are unable to supply certain products at competitive prices due to royalty payments we are required to make or at all because we were unable to secure a required license, our customers might cancel orders or seek other suppliers to replace us, which could have a material adverse effect on our business, results of operations and financial condition.

Changes in, or interpretations of, tax regulations or rates, or changes in the geographic dispersion of our net sales, or changes in other tax benefits, may adversely affect our income, value-added and other taxes, which may in turn have a material adverse effect on our business, results of operations, and financial condition.

Our future effective tax rates could be unfavorably affected by the resolution of issues arising from tax audits with various tax authorities in the United States and abroad; adjustments to income taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairments of goodwill in connection with acquisitions; changes in available tax credits; changes in tax laws or regulations or tax rates; changes in the interpretation or application of tax laws; changes in tax regulations or rates; increases or decreases in the amount of net sales or earnings in countries with particularly high or low statutory tax rates; changes in exemptions from taxes in certain jurisdictions or in connection with certain transactions; or by changes in the valuation of our deferred tax assets and liabilities. In addition, taxable income in any jurisdiction is dependent upon acceptance of our operational practices and intercompany transfer pricing by local tax authorities as being on an arm’s length basis. Due to inconsistencies in application of the arm’s length standard among taxing authorities, as well as lack of adequate treaty-based protection, transfer pricing challenges by tax authorities could, if successful, substantially increase our income tax expense. While we enjoy and expect to continue to enjoy beneficial tax treatment in certain foreign jurisdictions, most notably Brazil and Malaysia, we are subject to meeting specific conditions in order to receive the beneficial treatment. Additionally, many of the beneficial treatments must be renewed periodically, and our enjoyment thereof is conditioned upon compliance with several legal requirements and is subject to change. See “—Risks Relating to our International Operations—If the tax incentive or tax holiday arrangements from which we benefit in Brazil or Malaysia change or cease to be in effect or applicable in part or in whole, for any reason, or if our assumptions and interpretations regarding tax laws and incentive or holiday arrangements prove to be incorrect, the amount of corporate income, excise, import and contribution taxes we have to pay could increase significantly.”

We are subject to tax examination in the United States and in foreign jurisdictions, including in Brazil where we have had several audits and are currently being audited with respect to certain taxes. We regularly assess the likelihood of outcomes resulting from these examinations to determine the adequacy of our provision for taxes and have reserved for potential adjustments that may result from current examinations. We believe such estimates to be reasonable; however, there can be no assurance that the final determination of any examinations will be in the amounts of our estimates.

Any significant variance in the results of an examination as compared to our estimates, any failure to continue to receive any beneficial tax treatment in any of our foreign locations or any increase in our future effective tax rates due to any of the factors set forth above or otherwise could reduce net income and have a material adverse effect on our business, results of operations and financial condition.

31

Our ability to use our net operating loss carryforwards are limited.

As of August 30, 2019, we had U.S. federal and state net operating loss carryforwards of approximately $114.8 million and $44.4 million, respectively. The federal net operating loss carryforwards will expire, if not utilized, in fiscal 2023 through fiscal 2038, and the state net operating loss carryforwards will expire in fiscal 2020 through fiscal 2038, both in varying amounts, if not utilized. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended, or the Code, if a corporation undergoes an “ownership change,” the corporation’s ability to use its pre-change net operating loss carryforwards to offset its post-change taxable income may be limited. In general, an “ownership change” will occur if there is a cumulative change in our ownership by certain “5-percent shareholders” that exceeds 50 percentage points over a rolling three-year period. Similar rules may apply under state tax laws. Our net operating loss carryforwards are subject to limitations per Section 382 of the Code. We have experienced ownership changes in the past, and we may experience ownership changes in the future as a result of future transactions in our ordinary shares, some changes of which may be outside our control. As a result, our ability to use our pre-change net operating loss carryforwards to offset post-change U.S. federal and state taxable income may be subject to additional limitations.

If our goodwill or intangible assets become impaired, we may be required to record a significant charge to earnings.

Under U.S. GAAP, we review our long-lived intangible and tangible assets for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. Goodwill is required to be tested for impairment at least annually. Factors that may be considered a change in circumstances indicating that the carrying value of our goodwill or other intangible assets may not be recoverable include declines in our share price and market capitalization or future cash flow projections. We may be required to record a significant charge to earnings in our financial statements during the period in which any impairment of our goodwill or other intangible assets is determined. Impairment charges could have a material adverse effect on our business, results of operations and financial condition.

We are subject to a variety of federal, state, foreign and international laws and regulatory regimes. Failure to comply with governmental laws and regulations could subject us to, among other things, mandatory product recalls, penalties and investigation and legal expenses which could have an adverse effect on our business, results of operations and financial condition.

Our business is subject to regulation by various U.S. federal and state governmental agencies. Such regulation includes, without limitation, the radio frequency emission regulatory activities of the Federal Communications Commission, the antitrust regulatory activities of the Federal Trade Commission, or FTC, and the Department of Justice, the consumer protection laws of the FTC, the import/export regulatory activities of the Department of Commerce, the product safety regulatory activities of the Consumer Products Safety Commission, the regulatory activities of the Occupational Safety and Health Administration, the environmental regulatory activities of the Environmental Protection Agency, the labor regulatory activities of the Equal Employment Opportunity Commission, the export control regulatory activities of the Department of State, and tax and other regulations by a variety of regulatory authorities in each of the areas in which we conduct business. We are also subject to similar, and in some cases additional, regulation in other countries where we conduct business, including import and export laws and foreign currency control. In certain jurisdictions, such regulatory requirements may be more stringent and complex than in the United States. We are also subject to a variety of U.S. federal and state employment and labor laws and regulations, including, without limitation, the Americans with Disabilities Act, the Federal Fair Labor Standards Act, the Worker Adjustment and Restructuring Notification Act, which requires employers to give affected employees at least 60 days’ notice of a plant closing or a mass layoff, and other regulations related to working conditions, wage-hour pay, overtime pay, employee benefits, antidiscrimination and termination of employment.

Like other companies operating or selling internationally, we are subject to the Foreign Corrupt Practices Act, or FCPA, and other laws which generally prohibit improper payments or offers of payments to foreign governments and their officials and political parties by U.S. companies and their intermediaries for the purpose of obtaining or retaining business or otherwise obtaining favorable treatment. We are also subject to similar or even more restrictive anticorruption laws imposed by the governments of other countries where we do business, including the UK Bribery Act, the Malaysian Anticorruption Act and the Brazil Clean Company Act. We make sales and operate in countries

32

known to experience corruption that are rated as high-risk nations. Our business activities in such countries create the risk of unauthorized conduct by one or more of our employees, consultants, customs brokers, freight forwarders, sales agents or distributors that could be in violation of various laws including the FCPA or similar local regulations. In addition, we may be held liable for actions taken by such parties even though such parties are not subject to the FCPA or similar laws. Any determination that we have violated the FCPA or similar laws may result in severe criminal or civil sanctions, and we may be subject to other liabilities that could have a material adverse effect on our business, results of operations and financial condition.

Our Brazilian operations are subject to periodic and regular investigations by labor officials and governmental bodies, including the Brazilian Ministry of Labor and the Brazilian Labor Public Prosecutor’s Office, with respect to our compliance with labor rules and regulations. Although we believe that we comply with all of the laws and regulations applicable to our business and activities performed in Brazil, these investigations could result in fines and proceedings that may materially and adversely affect our business, results of operations and financial condition.

Noncompliance with applicable regulations or requirements could subject us to investigations, sanctions, mandatory product recalls, enforcement actions, disgorgement of profits, disbarment from government projects, fines, damages and civil and criminal penalties or injunctions that could harm our business, results of operations and financial condition. In addition, from time to time we have received, and may receive in the future, correspondence from former employees and parties with whom we have done business with, threatening to bring claims against us alleging that we have violated one or more regulations related to customs, labor and employment, foreign currency control or other laws or regulations. An adverse outcome in any litigation or proceeding related to such matters could require us to pay damages, attorneys’ fees and/or other costs.

If any governmental sanctions were to be imposed, or if we were not to prevail in any civil action or criminal proceeding, our business, results of operations and financial condition could be materially adversely affected. In addition, responding to any litigation or action would likely result in a significant diversion of management’s attention and resources and a significant increase in professional fees.

We could incur substantial costs or liabilities as a result of violations of environmental laws.

Our operations and properties are subject to a variety of U.S., foreign government and international environmental laws and regulations governing, among other things, environmental licensing and registries, protection of flora and fauna, air emissions, use of water resources, wastewater discharges, management and disposal of hazardous and non-hazardous materials and wastes, reverse logistics (take-back policy) and remediation of releases of hazardous materials. Our failure to comply with present and future requirements, or the management of known or identification of new or unknown contamination, could cause us to incur substantial costs, including cleanup costs, indemnifications, compensations, fines, suspension of activities and other penalties, investments to upgrade our facilities or change our processes or curtailment of operations. For example, the presence of lead in quantities not believed to be significant have been found in the ground under one of the multi-tenant buildings we lease in Brazil. While we did not cause the contamination, we may be held responsible if remediation is required, although we may be entitled to seek indemnification from responsible parties under Brazilian law and from our lessor under our lease. The identification of presently unidentified environmental conditions, more vigorous enforcement by regulatory agencies, enactment of more stringent laws and regulations or other unanticipated events may arise in the future and give rise to material environmental liabilities and related costs. The occurrence of any of the foregoing could have a material adverse effect on our business, results of operations and financial condition.

Worldwide political conditions and threats of terrorist attacks may adversely affect our operations and demand for our products.

Armed conflicts around the world could have an impact on our sales, our supply chain and our ability to deliver products to our customers. Political and economic instability in some regions of the world could also have a negative impact on our business. More generally, various events could cause consumer confidence and spending to decrease, or could result in increased economic or financial volatility, any of which could result in a decrease in demand for our products.

Additionally, the occurrence or threat of terrorist attacks may in the future adversely affect demand for our products. In addition, such attacks may negatively affect our operations directly or indirectly and such attacks or other armed conflicts may directly impact our physical facilities or those of our suppliers or customers. Such attacks may make travel and the transportation of our products more difficult and more expensive, ultimately having a negative effect on our business.

33

Any such occurrences could have a material adverse effect on our business, results of operations and financial condition.

Our operations in different parts of the world could be subject to natural disasters, health epidemics and other business disruptions, which could have a material adverse effect on our business, results of operation and financial condition.

Our operations in different parts of the world could be subject to natural disasters, including earthquakes, monsoons, cyclones and floods. For example, our United States headquarters in Newark, California and our Penguin Computing operations in Fremont, California are located near major earthquake fault lines. Our manufacturing facility in Penang, Malaysia is also prone to natural disasters, such as cyclones, monsoons and floods. In the event of a major earthquake, cyclone, monsoon or other natural or manmade disaster, we could experience business interruptions, destruction of facilities and/or loss of life, any of which could materially adversely affect our business.

In addition, our business could be adversely affected by the outbreak of diseases and pandemics. Any occurrence of these pandemic diseases or other adverse public health developments in Malaysia or elsewhere could severely disrupt our business or the business of our customers and suppliers, which could materially adversely affect our business.

Since a large percentage of our production is done in a small number of facilities, a disruption to operations could have a material adverse effect on our business, results of operations and financial condition.

Risks Relating to our International Operations

We depend on the desktop, notebook, server and smartphone markets in Brazil, and lack of growth, or the occurrence of contraction, in these markets have in the past, and could again in the future, have a material adverse impact on our business, results of operations and financial condition.

A significant portion of our sales and operations are focused on Brazil. Sales to customers in Brazil accounted for 44%, 62% and 52% of our net sales in fiscal 2019, 2018 and 2017, respectively. We have invested substantial financial and management resources to develop a research and development center and a semiconductor packaging and test facility in Brazil in order to target the growing market for memory in Brazil and to take advantage of certain Brazilian laws and government incentives, as described below in “—Risks Relating to our International Operations.” Our future financial performance will depend in large part on growth in the Brazilian market, which may not grow again at historical rates, or at all.

Demand for our products in Brazil is dependent upon, among other things, demand in the markets served by our customers, including the Brazilian computing and mobile markets. From time to time, the markets served by our Brazilian customers have experienced significant downturns, often in connection with political unrest or in connection with, or in anticipation of, declines in general economic conditions. A decline or significant shortfall in demand in any of the markets that we serve could have a significant negative impact on the demand for our products. In addition, a prolonged economic downturn in Brazil, even absent a worldwide economic downturn, may lead to higher interest rates or significant changes in the rate of inflation in Brazil, or an inability of our Brazilian customers and suppliers to access capital on acceptable terms. Our customers and suppliers in Brazil could experience cash flow problems, credit defaults or other financial hardships.

In addition, as discussed in greater detail below, our sales and our profit margins in Brazil have been favorably impacted by laws establishing local content requirements for electronics products which laws are undergoing changes as a result rulings by the WTO. See “—Our success in Brazil depends in part on Brazilian laws establishing local content requirements for electronics products. The elimination of or a reduction in the local content requirements, or our inability to secure the benefits of these regulations, could significantly reduce the demand for, and the profit margins on, our products in Brazil.”

Any of these circumstances could have a material adverse effect on our business, results of operations and financial condition.

34

Our success in Brazil depends in part on Brazilian laws establishing incentives for local manufacturing of electronics products. The elimination of or a reduction in the incentives for local manufacturing, or our inability to secure the benefits of these regulations, could significantly reduce the demand for, and the profit margins on, our products in Brazil.

Successive Brazilian governmental administrations have adopted economic policies intended to foster innovation and investment in local production, stimulate job growth, provide stimulus to exports and defend local manufacturers in various industries. In recent decades, the Brazilian government identified the design and manufacture of ICs as a priority and established tax incentives and local content requirements intended to promote the development of the local IT industry. These incentives include the PPB/IT Program, PADIS and Lei do Bem. The law that provides the PPB/IT Program benefits is currently legislated to remain in force through the end of 2029. The PPB/IT Program is intended to promote local manufacturing by allowing qualified companies to receive incentives when they sell specified IT products, including desktops, notebooks, servers, SmartTVs and mobile products that contain components that are manufactured in Brazil. The PPB/IT Program, through the enactment of several ordinances, provided for reduced Brazilian federal excise tax rate, or the IPI, for qualified parties as compared to the rate that is required to be collected by non-qualified parties. The PPB/IT Program provided an incentive for certain customers to purchase products from us because they were not required to pay the regular level of IPI on their purchases. Under the PPB/IT Program, the percentage of local content required in specified IT products has increased significantly from 2006 to 2019. For example, under the PPB/IT Program, from 2006 to 2019, the total requirement of DRAM modules made with locally packaged DRAM ICs for notebook computers has increased from 0% to 80%. In order to receive the intended treatment as a PPB/IT Program supplier, our subsidiary, SMART do Brazil, was required to invest in research and development activities in an amount equal to 4% of its gross annual sales revenues reduced by the following: the cost of raw materials qualified as products eligible for the PPB/IT Program, including the ICs that are purchased from our other Brazilian subsidiary, SMART Brazil, and that are used to make memory modules; applicable sales taxes; the value of products exported out of Brazil; and the value of products shipped to the Manaus Free Trade Zone.

Brazil’s local content requirements for the IT industry have been subject to criticism by other governments and international organizations.

In 2013, the EU, later joined by Japan, requested the establishment of a panel within the WTO to determine whether the structure of certain programs enacted by the Brazilian government concerning incentives and local content requirements for the automotive and several other industries (including the IT industry and including portions of Lei do Bem that do not relate to our business, PADIS and the PPB/IT Program), are inconsistent with WTO rules. On August 30, 2017, the WTO panel released a report and on December 13, 2018, after hearing appeals, the appellate body of the WTO released its decision in which it upheld some of the panel’s findings that, among other things, the tax exemptions, reductions and suspensions granted for the automotive, IT and other industries amount to subsidies that are inconsistent with the principles of the various WTO agreements, while also rejecting some of the complaints by the EU and Japan. The WTO’s decision included a recommendation that Brazil withdraw certain of the subsidies, however, it does not impact the benefits that we receive under Lei do Bem. The appellate body also noted that it would not contravene the principles of the WTO agreements for Brazil to establish local manufacturing processes as a condition to benefit from incentives granted by the government provided that certain conditions are met.

In response to the WTO report, government authorities in Brazil revoked several ordinances that established local content requirements under the PPB/IT Program, many of which were related to our local business. The revocation became effective June 30, 2019. Government officials in Brazil have continued to express their intent to restructure the incentives to be consistent with the WTO principles while still continuing to support local industry.  In June 2019, the authorities in Brazil published the first of a series of new ordinances, effective as of July 1, 2019, that provide a structure for revised support for local manufacturing utilizing a score-based point system for eligibility for incentives. In this system, each manufacturing process within an electronic device is assigned a different number of points. Our manufacturing processes related to memory products are a valuable part of the electronics manufacturing chain and, as such, are expected to provide our customers the opportunity to accomplish a significant number of the overall points required if they purchase products manufactured by us in Brazil.

While we believe that this score-based system will continue to incentivize our Brazilian customers to purchase products from us in Brazil, there can be no assurance that the replacement programs will ultimately be structured and implemented in a way that will provide the same or a similar level of support and benefit for our customers and our business as was previously in place. There can also be no assurance that the WTO, the EU and Japan will agree that this new program structure is compliant with the WTO agreements. Any adverse change in legislation or in the impact and effectiveness of the local incentives programs, or our failure to meet the requirements of any of the regulations, could significantly reduce the demand for, the profit margins on, and the competitiveness of our products in Brazil, and would have a material adverse effect on our business, results of operations and financial condition.

35

In addition, we benefit from various other tax incentives extended to us in Brazil to promote the development of the local IT industry, and are subject to related risks, as described below.

Significant changes in the political or economic environments in Brazil or Malaysia could adversely affect our business, results of operations and financial condition.

We have extensive operations in Malaysia and significant operations and sales in Brazil. The governments of these countries frequently intervene in their respective economies and occasionally make significant changes in policies and regulations. The Brazilian government’s actions to control inflation and other policies and regulations have often involved, among other measures, increases in interest rates, changes in tax policies, price controls, currency devaluations, capital controls and limits on imports. Our business, results of operations and financial condition, as well as the market price of our securities, may be adversely affected by changes in these and in other countries, to policies or regulations involving or affecting general economic factors, such as:

The political environment in Brazil has influenced and continues to influence the performance of the country’s economy. Recurring economic and political instability as well as corruption scandals in Brazil contribute to a reduction in market confidence in the Brazilian economy. Moreover, we cannot predict the outcome or future effects of new political administrations in Brazil and cannot predict which policies will be adopted or modified or the effect thereof on Brazilian economy and on our business.  Any new policies or changes in current policies may have a material adverse effect on our business and financial condition.

If the tax incentive or tax holiday arrangements from which we benefit in Brazil or Malaysia change or cease to be in effect or applicable in part or in whole, for any reason, or if our assumptions and interpretations regarding tax laws and incentive or holiday arrangements prove to be incorrect, the amount of corporate income, excise, import and contribution taxes we have to pay could increase significantly.

We have structured our operations in a manner designed to maximize our benefit from various tax incentives and/or tax holidays extended to manufacturers in Brazil and Malaysia to encourage investment and employment. In Brazil, we participate in the following government investment incentive programs, among others:

36

Compliance with these programs is measured annually, on a calendar year basis. We believe that we have fulfilled these research and development investment requirements through calendar 2018, however, for certain years the authorities in Brazil have not yet completed the relevant review. For calendar years 2011 to 2016, the authorities have requested additional information in order to review whether certain of our reported research and development investments as required for SMART do Brazil qualify for the PPB/IT Program. We believe that all of our research and development investments do qualify and we have provided the additional information. While we believe that all of our reported investments qualify for the research and development requirements, we cannot provide assurance that the Brazilian authorities will agree with our classification in which case we may be required to make incremental payments to the authorities or to make incremental research and development investments in the future. If we fail to make the additional payments or additional investments if required, we may lose the anticipated benefits of these programs and could be penalized for failing to make the research and development investments when required, or for failing to pay required statutory income taxes or to collect the required PIS/COFINS and IPI upon our sales. In addition, there is a risk that modifications to laws may prohibit, interrupt, limit, terminate early or change the use of these existing tax incentives. Additionally, we cannot provide assurance that we will be able to make the required investments in the future.

In 2013, the EU, later joined by Japan, requested the establishment of a panel within the World Trade Organization, or WTO, to determine whether the structure of certain programs enacted by the Brazilian government concerning incentives and local content requirements for the automotive and several other industries (including the IT industry and including portions of Lei do Bem that do not relate to our business, as well as PADIS and the PPB/IT Program), were inconsistent with WTO rules. See “Risks Related to our International Operations—Our success in Brazil depends in part on Brazilian laws establishing incentives for local manufacturing of electronics products. The elimination of or a reduction in the incentives for local manufacturing, or our inability to secure the benefits of these regulations, could significantly reduce the demand for, and the profit margins on, our products in Brazil.”

37

In addition, we have obtained tax incentives from Malaysia, which provide that certain classes of income we earn in Malaysia are subject to tax holidays. Each tax incentive is separate and distinct from the others and may be granted, withheld, extended, modified, truncated, complied with or terminated independently without any effect on the other incentives. To retain these tax benefits in Malaysia, we must continue to meet certain operating conditions specific to each incentive relating to, among other things, investments in fixed assets, research and development expenditures, minimum operating expenditures, required ratio of staff with degrees in science and technology, local purchasing programs, minimum numbers of patents with local involvement and registration and segregated accounting for the covered products or businesses. If we cannot or elect not to comply with the operating conditions included in any particular tax incentive, we will lose the related tax benefits. In such event, we could be required to refund material tax benefits previously realized by us with respect to that incentive and, depending on the incentive at issue, could likely be required to modify our operational structure and tax strategy. Any such modified structure or strategy may not be as beneficial to us from an income tax expense or operational perspective as the benefits provided under the present tax incentive arrangements. We have received approvals for these tax incentives for up to ten years beginning September 2019, subject to certain operating conditions. The impact of these tax incentives will be recorded in the period in which they are realized.

Our interpretations and conclusions regarding the tax incentives are not binding on any taxing authority. If our assumptions about tax and other laws are incorrect, if these tax incentives are substantially modified or rescinded or if we fail to meet the conditions of any of the tax incentives, we could suffer material adverse tax and other financial consequences including owing significant amounts of taxes and penalties that would increase our expenses, reduce our profitability and adversely affect our cash flows, results of operations and financial condition.

If Brazilian administrative tax courts find that we have used an incorrect product code on our imports, then the amount of administrative penalties and interest that we have to pay on past transactions could have a material adverse effect on our business, results of operations and financial condition.

On February 23, 2012, Brazilian federal tax authorities served our Brazilian operating subsidiary, SMART Brazil, with a tax assessment for approximately R$117.0 million (or $31.1 million) (the First Assessment), alleging that SMART Brazil had incorrectly used an import product classification code for its imports of unmounted ICs for the five calendar years of 2007 through and including 2011. Brazilian federal tax authorities subsequently served a second assessment for an administrative penalty of approximately R$6.0 million (or $1.6 million) (the Second Assessment) for the alleged use of an improper import code. Each assessment is subject to increases for interest and other charges.

In March 2012, SMART Brazil filed defenses to the tax assessments. On May 2, 2013, the first level administrative tax court ruled in favor of the tax authorities and against SMART Brazil for the First Assessment, but did not rule on the Second Assessment for the administrative penalty. SMART Brazil filed an appeal on May 31, 2013 at the second level tax court known as CARF. SMART Brazil’s appeal resulted in a unanimous favorable decision rejecting the position of the tax authorities. Subsequently, the tax authorities filed a request for clarification of certain points in the decision published by CARF, and on September 17, 2014, we received a unanimous ruling rejecting the tax authorities request for clarification. On November 7, 2014, the tax authorities notified CARF that they would not be appealing the CARF decision, and the First Assessment has been extinguished.

On February 6, 2018, the first level administrative court unanimously ruled in favor of SMART Brazil with respect to the Second Assessment. Due to the size of the Second Assessment, Brazil law required that the tax authorities appeal the decision to CARF. The appeal on the Second Assessment was heard on December 11, 2018 and we received a unanimous favorable ruling rejecting the position of the tax authorities. The tax authorities did not file any request for clarification or appeal and, as a result, the Second Assessment was extinguished in May 2019.

Due to the issuance of these tax assessments, Brazilian federal tax authorities conducted an enrollment of assets of SMART Brazil. Brazilian legislation states that whenever the sum of the debts owed to the Brazilian Revenue Service exceeds 30% of the known equity of a company and R$2.0 million (or $0.5 million), the Brazilian Revenue Service may conduct an enrollment of assets of SMART Brazil, which is a means of monitoring the company’s equity. During this period, the taxpayer must notify the Brazilian Revenue Service of any disposal, encumbrance or transfer of the assets or rights enrolled within five days from the occurrence of the act; if the company does not provide such notice, then the Brazilian Revenue Service may file a tax injunction. The enrollment does not constitute a lien or encumbrance on the assets. The assets covered by the enrollment are typically assets classified as fixed assets or non-current assets and include assets that are subject to any form of registration before a

38

public deed service or equivalent, such as real estate and vehicles. Other assets may be subject to enrollment in the event that the assets described above are not sufficient to satisfy the amount of the tax liability. The enrollment does not create any limitation or prohibition against remitting dividends or making cash payments of interest on equity. After the First Assessment has been extinguished, we petitioned to have the enrollment cancelled and the tax authorities substantially reduced the amount of the enrollment to R$13.9 million (or $3.7 million) as of January 31, 2017. After the Second Assessment was extinguished, we petitioned the tax authorities again to cancel the enrollment. There can be no assurance that the enrollment will be cancelled unless all of the assessments are extinguished.

On December 12, 2013, SMART Brazil received another notice of assessment in the amount of R$3.6 million (or $1.0 million) with respect to the same import-related tax issues and penalties as discussed above for 2012 and 2013 (the Third Assessment). This new assessment does not seek import duties and related taxes on DRAM products and only seeks import duties and related taxes on Flash unmounted components with respect to the months of January 2012 to June 2012. This is because SMART Brazil’s imports of DRAM unmounted components were subject to 0%, and after June 2012, SMART Brazil’s imports of Flash unmounted components became subject to 0%, import duties and related taxes as a result of PADIS. Even with this 0%, if SMART Brazil is found to have used the incorrect product classification code, SMART Brazil will be subject to an administrative penalty equal to 1% of the value of the imports. SMART Brazil has filed defenses to this assessment. We believe that SMART Brazil used the correct product code on its imports and that the Third Assessment is incorrect.

As a result of the CARF decision in favor of SMART Brazil on the First Assessment and the Second Assessment, we believe that the probability of any material charges as a result of the Third Assessment is remote. We can provide no assurance that SMART Brazil ultimately will prevail on the remaining tax assessments or the administrative penalties, and no amounts have been accrued in the financial statements for any such assessments or penalties. In addition, in the event that SMART Brazil does not prevail, the amount of the assessments and the penalties and interest could have a material adverse effect on our business, results of operations and financial condition.

Our business is subject to the risks generally associated with international business operations.

Sales outside of the United States accounted for 68%, 84% and 82% of our net sales in fiscal 2019, 2018 and 2017, respectively. In addition, a significant portion of our product design and manufacturing is performed at our facilities in Brazil and Malaysia. In addition, a significant amount of our product design activities are performed in Taiwan and India. As a result, our business is and will continue to be subject to the risks generally associated with international business operations in Brazil, Malaysia and other foreign countries, including:

39

Some of the foreign countries in which we do business or have operations have been subject to social and political instability in the past, and interruptions in operations could occur in the future. Our net sales, results of operations and financial condition could be adversely affected by any of the foregoing factors.

Our global operations expose us to numerous and sometimes conflicting legal and regulatory requirements, and violation of these regulations could harm our business.

We are subject to numerous, and sometimes conflicting, legal regimes on matters as diverse as anticorruption, import/export controls, content requirements, trade restrictions, tariffs, taxation, sanctions, immigration, internal and disclosure control obligations, securities regulation, anti-competition, data privacy and labor relations. This includes in emerging markets where legal systems may be less developed or familiar to us. Compliance with diverse legal requirements is costly, time consuming and requires significant resources. Violations of one or more of these regulations in the conduct of our business could result in significant fines, criminal sanctions against us or our officers, prohibitions on doing business and damage to our reputation. Violations of these regulations in connection with the performance of our obligations to our customers or suppliers also could result in liability for significant monetary damages, fines and/or criminal prosecution, unfavorable publicity and other reputational damage, restrictions on our ability to process information and allegations by our customers or suppliers that we have not performed our contractual obligations. Due to the varying degrees of development of the legal systems of the countries in which we operate or sell, local laws might be insufficient to protect our rights.

Our operations in foreign countries are more difficult to manage, which may expose us to additional risks that may not exist in the United States, which in turn could have a negative impact on our business, results of operations and financial condition.

A significant portion of our operations is outside of the United States. Additionally, international sales account for a significant portion of our overall sales. In some of the countries in which we operate or sell our products, it is difficult to recruit, employ and retain qualified personnel to manage and oversee our local operations, sales and other activities. The effects of instabilities in the labor market, including strikes, work stoppages, protests and changes in employment regulations, increases in wages and the conditions of collective bargaining agreements could directly affect the development of our activities and those of our customers, which could have a material adverse effect on our results. Further, given our executive officers’ lack of physical proximity to our foreign country activities and the inherent limitations of cross-border information flow, our executive officers may at times face extra challenges in their ability to effectively oversee the day-to-day management of our international operations. The challenges facing management to effectively recruit, employ and retain qualified personnel and to otherwise effectively manage our international operations could result in compliance, control or other issues that could have a material negative impact on our business, results of operations and financial condition.

If we were to lose the tax-related benefits of being a Cayman Islands company, our business could be adversely affected.

We are a Cayman Islands company and operate through subsidiaries in a number of countries throughout the world. As a result, income generated in certain non-U.S. subsidiaries is not subject to taxation in the United States. We are subject to changes in tax laws, treaties and regulations or the interpretation or enforcement thereof in the United States, the Cayman Islands and jurisdictions in which we or any of our subsidiaries operate or are resident. In the past, legislative proposals have been introduced in the United States that, if enacted into law, could result in us being considered a U.S. company for tax purposes. This could have the effect of subjecting a larger portion of our worldwide income to U.S. taxation. While no such laws have been enacted to date, there can be no assurance that they will not be enacted in the future.

40

Unfavorable currency exchange rate fluctuations could cause currency exchange losses, result in our products becoming relatively more expensive to our overseas customers and increase our manufacturing costs, each of which could adversely affect our business and our profitability.

Our international sales and our operations in foreign countries expose us to certain risks associated with fluctuating currency values and exchange rates. Because some of our sales are denominated in U.S. dollars, increases in the value of the U.S. dollar could increase the price of our products so that they become relatively more expensive to customers in a particular country, possibly leading to a reduction in sales and profitability in that country. Some of the sales of our products, including sales in Brazil, are denominated in foreign currencies. Gains and losses on the conversion to U.S. dollars of such revenues and of other associated monetary assets and liabilities, as well as profits and losses incurred in certain countries, may contribute to fluctuations in the value of our assets and our results of operations. We also have costs and expenses that are denominated in foreign currencies, and decreases in the value of the U.S. dollar could result in increases in such costs that could have a significant negative impact on our results of operations. In addition, fluctuating values between the U.S. dollar and other currencies can result in currency gains which are used in the computation of foreign taxes and can increase foreign taxable income.

In fiscal 2019, we began using foreign exchange forward contracts in Brazil to mitigate foreign currency exchange rate risk associated with foreign-currency-denominated assets and liabilities, primarily third party payables. We do not use foreign currency contracts for speculative or trading purposes. Foreign exchange forward contracts outstanding at August 30, 2019 are not designated as hedging instruments for hedge accounting purposes.

We are a holding company. If enacted, exchange controls may limit our ability to receive dividends and other distributions from our foreign subsidiaries.

We conduct all of our operations through subsidiaries and are dependent on dividends or other intercompany transfers of funds from our subsidiaries to meet our obligations and pay intercompany dividends. If enacted, restrictions on intercompany dividends or other distributions in certain jurisdictions could have a material adverse effect on our ability to transfer funds from certain subsidiaries. Additionally, Brazilian law permits the Brazilian government to impose temporary restrictions on conversions of Brazilian currency into foreign currencies and on remittances to foreign investors of proceeds from their investments in Brazil whenever there is a serious imbalance in Brazil’s balance of payments or there are reasons to expect a pending serious imbalance. The Brazilian government may take similar measures in the future. Any imposition of restrictions on conversions and remittances could hinder or prevent us from converting Brazilian reais into U.S. dollars or other foreign currencies and remitting abroad dividends, distributions or the proceeds from operations in Brazil.

Inflation and certain measures by the Brazilian government to curb inflation have historically adversely affected the Brazilian economy and Brazilian securities market, and high levels of inflation in the future would adversely affect our business, results of operations and financial condition.

In the past, Brazil has experienced extremely high rates of inflation. Inflation and some of the measures taken by the Brazilian government in an attempt to curb inflation have had significant negative effects on the Brazilian economy generally. Inflation, policies adopted to curb inflationary pressures and uncertainties regarding possible future governmental intervention have contributed to economic uncertainty and heightened volatility in the Brazilian securities market.

Since the introduction of the real in 1994, Brazil’s inflation rate has been substantially lower than in previous periods. According to the Extended National Consumer Price Index (Índice Nacional de Preços ao Consumidor Amplo), Brazilian inflation rates were 3.7%, 2.9%, 6.3%, 10.7%, 6.4%, 5.9%, 5.8% and 6.5% in 2018, 2017, 2016, 2015, 2014, 2013, 2012 and 2011, respectively. However, the Brazilian government’s measures to control inflation have often included maintaining a tight monetary policy with high interest rates, thereby restricting the availability of credit and reducing economic growth. The Central Bank of Brazil has frequently adjusted the interest rate in situations of economic uncertainty and to achieve objectives under the economic policy of the Brazilian government. Inflation, along with government measures to curb inflation and public speculation about possible future government measures, have had significant negative effects on the Brazilian economy and contributed to economic uncertainty in Brazil and heightened volatility in the Brazilian securities market, which may have an adverse effect on us.

41

If Brazil experiences substantial inflation or deflation in the future, we and our ability to comply with our obligations may be adversely affected. In addition, we may not be able to adjust the prices we charge our customers to offset the impact of inflation on our expenses, leading to an increase in our expenses and a reduction in our net operating margin. This could have a material negative impact on our business, results of operations and financial condition.

Developments and the perception of risk in other countries, such as the 2008-2009 developments in the global financial markets, and particularly in emerging market countries, may adversely affect the perceived value of companies with substantial operations in Brazil, causing the market price of our ordinary shares to decline.

The market value of securities of companies with substantial operations in Brazil is affected to varying degrees by political, economic and market conditions in other countries, including other Latin American and emerging market countries. Developments or economic conditions in other emerging market countries have at times significantly affected the availability of credit to the Brazilian economy and resulted in considerable outflows of funds from Brazil and decreases in the amount of foreign investments in Brazil. Although economic conditions in these countries may differ significantly from economic conditions in Brazil, investors’ reactions to developments in these other countries, such as the 2008-2009 developments in the global financial markets, may have an adverse effect on the market value of Brazilian companies or companies with significant operations in Brazil. Since a significant portion of our total assets is located in Brazil, a decrease of the perceived value of companies with substantial operations in Brazil could adversely impact the market price of our ordinary shares.

Risks Relating to our Debt

Our indebtedness could impair our financial condition and harm our ability to operate our business.

Certain of our subsidiaries have incurred indebtedness under a senior secured term loan and revolving credit facility, which we refer to, together with all related loan documents, as amended and restated in August 2017 and as amended thereafter, as the Amended Credit Agreement. The obligations under the Amended Credit Agreement are jointly and severally guaranteed on a senior basis by certain of our subsidiaries and secured by a pledge of the capital stock of, or equity interests in, most of our subsidiaries and by substantially all of our assets and those of our subsidiaries.

Our Brazilian operating subsidiary, SMART Brazil, has incurred additional indebtedness under a credit facility with the Brazilian Development Bank, or BNDES, which we refer to, together with all related loan documents and as amended from time to time, as the BNDES 2013 Credit Agreement. Under the BNDES 2013 Credit Agreement, credit in the amount of R$50.6 million (or $13.4 million) was made available to SMART Brazil for investments in infrastructure, research and development in Brazil and acquisitions of equipment not otherwise available in the Brazilian domestic market.

In December 2014, SMART Brazil entered into a second credit facility with BNDES, which we refer to, together with all related loan documents and as amended from time to time, as the BNDES 2014 Credit Agreement. The BNDES 2013 Credit Agreement and the BNDES 2014 Credit Agreement are collectively referred to as the BNDES Agreements. Under the BNDES 2014 Credit Agreement, a total of R$52.8 million (or $14.0 million) was made available to SMART Brazil for research and development conducted in Brazil related to IC packaging and for acquisitions of equipment not otherwise available in the Brazilian domestic market.

SMART Brazil’s obligations under the BNDES Agreements are guaranteed by Banco Votorantim S/A, or Banco Votorantim. SMART Brazil has entered into an agreement with Banco Votorantim to assure payment to Banco Votorantim in the event that BNDES collects on either of the guarantees.

As of August 30, 2019, the outstanding principal balance under the Amended Credit Agreement and the BNDES 2014 Credit Agreement, respectively, was $208.5 million and R$13.2 million (or $3.5 million). We have a right to draw an additional $50.0 million under the revolving loan provisions of the Amended Credit Agreement.

Our indebtedness may have important consequences, including, but not limited to, the following:

42

All of our debt under the Amended Credit Agreement bears interest at variable rates. If the rates were to increase significantly, our ability to borrow additional funds may be reduced and the risks related to our indebtedness would be exacerbated.

Our Amended Credit Agreement contains restrictions that limit our flexibility in operating our business.

Our Amended Credit Agreement contains restrictive covenants that limit our ability to engage in specified transactions and prohibit us from voluntarily prepaying certain of our other indebtedness. These covenants limit our ability to, among other things:

Under the Amended Credit Agreement, in certain circumstances we also are required to satisfy and maintain specified financial ratios. Our ability to meet those financial ratios could be affected by events beyond our control, and there can be no assurance that we will meet those ratios.

The failure to comply with any of these covenants would cause a default under the Amended Credit Agreement. A default, if not waived, could result in acceleration of the outstanding indebtedness under the Amended Credit Agreement, in which case such indebtedness would become immediately due and payable. If any default occurs, we may not be able to pay our debt or borrow sufficient funds to refinance it. Even if new financing is available, it may not be available on terms that are acceptable to us. Complying with these covenants may cause us to take actions that we otherwise would not take or not take actions that we otherwise would take.

43

Our ability to generate cash to service or to pay off our debt depends on many factors beyond our control.

Our ability to make scheduled payments on, to refinance, or to pay off our debt obligations depends on the financial condition and operating performance of our business. This, to a certain extent, is subject to prevailing economic and competitive conditions and to certain financial, business, regulatory and other factors beyond our control. Our business may not generate sufficient cash flows from operations, and future borrowings may not be available to us under the Amended Credit Agreement or the BNDES 2014 Credit Agreement in an amount sufficient to enable us to service our debt or to fund our other liquidity needs. If we are unable to meet our debt obligations or fund our other liquidity needs, we may need to restructure or refinance all or a portion of our debt or sell certain of our assets on or before the maturity of our debt. We may not be able to restructure or refinance any of our debt on commercially reasonable terms, if at all, which could cause us to default on our debt obligations and impair our liquidity. Any refinancing of our indebtedness could be at higher interest rates and may require us to comply with more onerous covenants that could further restrict our business operations. The outstanding principal balance of all term loans under the Amended Credit Agreement is due in full on August 9, 2022. As of August 30, 2019, the outstanding principal balance of these term loans was $208.5 million. If we are not able to refinance or restructure our debt obligations before they become due, this could cause us to default on our debt obligations and impair our liquidity.

In addition, if our cash flows and capital resources are insufficient to fund our debt service obligations, we may be forced to reduce or delay investments and capital expenditures, or to sell assets or seek additional capital. These alternative measures may not be available to us, may not be successful and may not permit us to meet our scheduled debt service obligations, which could result in substantial liquidity problems. Our Amended Credit Agreement restricts our ability to dispose of our assets and use the proceeds from the disposition. We may not be able to consummate those dispositions or to obtain the proceeds which we could realize from them, and these proceeds may not be adequate to meet any debt service obligations then due. Any of these circumstances could have a material adverse effect on our business, results of operations and financial condition.

Disruption in the financial markets may adversely impact the availability and cost of credit and cause other disruptions and additional costs at a time when we may need capital to refinance our debt or to fund growth.

Refinancing our existing debt or securing new debt or equity financing may be difficult, expensive, dilutive or impossible. As in the past, future instability in the financial markets may have an adverse effect on the U.S. and/or world economy which could adversely impact our business. If we are not able to obtain the capital required to refinance our existing debt or to fund future growth or if we are required to incur significant expenses and/or dilution to do so, this could have a material adverse effect on our business, results of operations and financial condition and may require us to undertake alternative plans, such as selling assets, reducing or delaying capital investments or downsizing our business.

Risks Relating to Investments in Cayman Islands Companies

We are a Cayman Islands company and, because the rights of shareholders under Cayman Islands law differ from those under U.S. law, shareholders may have difficulty protecting their shareholder rights.

Our corporate affairs are governed by our amended and restated memorandum and articles of association, the Cayman Islands Companies Law (2018 Revision), or the Companies Law, and the common law of the Cayman Islands. The rights of shareholders to take action against the directors, actions by minority shareholders and the fiduciary responsibilities of our directors to us under Cayman Islands law are to a large extent governed by the common law of the Cayman Islands. The common law of the Cayman Islands is derived in part from comparatively limited judicial precedent in the Cayman Islands as well as from English common law, which has persuasive, but not binding, authority on a court in the Cayman Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under Cayman Islands law are not as clearly established as they would be under statutes or judicial precedent in some jurisdictions in the United States. In particular, the Cayman Islands has a less exhaustive body of securities laws as compared to the United States, and some states, such as Delaware, have more fulsome and judicially interpreted bodies of corporate law.

44

It may be difficult to enforce a judgment of U.S. courts for civil liabilities under U.S. federal securities laws against us in the Cayman Islands.

We are a company incorporated under the laws of the Cayman Islands. The Cayman Islands courts are unlikely:

Although there is no statutory enforcement in the Cayman Islands of judgments obtained in the United States, the courts of the Cayman Islands will recognize and enforce a foreign money judgment of a foreign court of competent jurisdiction without retrial on the merits based on the principle that a judgment of a competent foreign court imposes upon the judgment debtor an obligation to pay the sum for which judgment has been given provided certain conditions are met. For a foreign judgment to be enforced in the Cayman Islands, such judgment must be final and conclusive and for a liquidated sum, and must not be in respect of taxes or a fine or penalty, inconsistent with a Cayman Islands judgment in respect of the same matter, impeachable on the grounds of fraud or obtained in a manner, and/or be of a kind the enforcement of which is, contrary to natural justice or the public policy of the Cayman Islands (awards of punitive or multiple damages may well be held to be contrary to public policy). A Cayman Islands Court may stay enforcement proceedings if concurrent proceedings are being brought elsewhere.

As a result of all of the above, public shareholders may have more difficulty protecting their interests in the face of actions taken by management, members of the board of directors or controlling shareholders than they would as public shareholders of a U.S. company.

Risks Relating to Our Ordinary Shares

Influence by our principal shareholders could adversely affect our other shareholders.

As of October 18, 2019, 48% of our ordinary shares outstanding immediately after our initial public offering, or IPO, in May 2017 were owned by Silver Lake Partners III Cayman (AIV III), L.P., Silver Lake Sumeru Fund Cayman, L.P. (investment funds affiliated with Silver Lake Partners and Silver Lake Sumeru, collectively Silver Lake) and their affiliates, including certain of our directors and our Chief Executive Officer. Pursuant to the terms of the Amended and Restated Sponsors Shareholder Agreement dated as of May 30, 2017, or the Sponsor Shareholder Agreement, entered into in connection with the IPO, Silver Lake has the right to nominate members of our board of directors as follows: so long as Silver Lake and their affiliates own, in the aggregate, (i) less than 50% but at least 35% of our ordinary shares outstanding immediately after the IPO, Silver Lake will be entitled to nominate four directors, (ii) less than 35% but at least 20% of our ordinary shares outstanding immediately after the IPO, Silver Lake will be entitled to nominate three directors, (iii) less than 20% but at least 10% of our ordinary shares outstanding immediately after the IPO, Silver Lake will be entitled to nominate two directors, (iv) less than 10% but at least 5% of our ordinary shares outstanding immediately after the IPO, Silver Lake will be entitled to nominate one director, and (v) less than 5% of our ordinary shares outstanding immediately after the IPO, Silver Lake will not be entitled to nominate any directors. The Sponsor Shareholder Agreement further provides that, for so long as Silver Lake collectively owns ordinary shares in an amount equal to or greater than 25% of our ordinary shares outstanding immediately following the IPO, in addition to the approval of our board of directors, the approval of Silver Lake will be required for certain corporate actions such as change in control transactions, acquisitions with a value in excess of $5 million and any material change in the nature of the business conducted by us or our subsidiaries. As a result, based on Silver Lake’s ownership of our ordinary shares and the rights in the Sponsor Shareholder Agreement, Silver Lake has significant ability to nominate members of our board of directors, and thereby influence our management and affairs. Silver Lake will continue to have significant influence over our affairs for the foreseeable future. This concentrated control will limit the ability of other shareholders to influence corporate matters and, as a result, we may take actions that our other shareholders do not view as beneficial. For example, this concentration of control could have the effect of delaying or preventing a change in control or otherwise discouraging a potential acquirer from attempting to obtain control of us, which in turn could cause the market price of our ordinary shares to decline or prevent our shareholders from realizing a premium over the market price for their ordinary shares. Furthermore, Silver Lake may have interests that are different from, or opposed to, the interests of the public shareholders.

45

The price of our ordinary shares may be volatile and subject to wide fluctuations.

The market price of the securities of technology companies can be especially volatile. Broad market and industry factors may adversely affect the market price of our ordinary shares regardless of our actual operating performance. The market price of our ordinary shares could be subject to wide fluctuations in response to the risk factors listed in this section and others beyond our control, including, among other things:

In addition, the stock market in general has experienced substantial price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of particular companies affected. These broad market and industry factors may materially harm the market price of our ordinary shares, regardless of our operating performance. In the past, following periods of volatility in the market price of certain companies’ securities, securities class action litigation has been instituted against these companies. This litigation, if instituted against us, could adversely affect our financial condition or results of operations.

46

An active trading market for our ordinary shares may not be maintained.

Our ordinary shares are listed on the NASDAQ. However, we can provide no assurance that we will be able to maintain an active trading market for our ordinary shares on NASDAQ or any other exchange in the future. If there is no active market for our ordinary shares, the market price and liquidity of our ordinary shares may be materially and adversely affected. The lack of an active market may reduce the fair market value of our ordinary shares or impair your ability to sell the ordinary shares at the time you may wish to sell them or at a price that you consider reasonable. Investors in our ordinary shares may experience a significant decrease in the value of their shares regardless of our operating performance or prospects.

If financial analysts do not publish research or reports about our business, or publish negative reports about our business, our share price and trading volume could decline.

The trading market for our ordinary shares depends in part on the research and reports that financial analysts publish about us or our business. We do not have any control over these analysts. If one or more of the analysts who cover us downgrade our shares, change their opinion of our shares, or provide a negative opinion about our company, our share price would likely decline. If one or more of these analysts cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.

If our estimates or judgments relating to our critical accounting policies are based on assumptions that change or prove to be incorrect, our results of operations could fall below expectations of securities analysts and investors, resulting in a decline in the market price of our ordinary shares.

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, as described in “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations,” the results of which form the basis for making judgments about the carrying values of assets, liabilities, equity, revenue and expenses that are not readily apparent from other sources. Significant assumptions and estimates used in preparing our consolidated financial statements include those related to revenue recognition, accounts receivable, inventory valuation, income taxes, impairment of long-lived assets and long-lived assets to be disposed, share-based compensation and fair value of ordinary shares. If our assumptions change or if actual circumstances differ from those in our assumptions, our results of operations may be adversely affected and may fall below the expectations of securities analysts and investors, resulting in a decline in the market price of our ordinary shares.

Future sales of our ordinary shares in the public market, or the perception that these sales may occur, could cause our share price to fall.

Sales of substantial amounts of our ordinary shares in the public market, including sales of our ordinary shares by us or our affiliates pursuant to the Shelf Registration Statement, defined below, or otherwise, or the perception that these sales may occur, could cause the market price of our ordinary shares to decline. This could also impair our ability to raise additional capital through the sale of our equity securities. Under our amended and restated memorandum and articles of association, we are authorized to issue up to 200,000,000 ordinary shares, of which 23,616,874 ordinary shares were outstanding as of August 30, 2019. Out of our ordinary shares outstanding as of August 30, 2019, 9,959,293 shares are held by our affiliates and our current directors, executive officers and their respective affiliates, which are eligible for resale in the public markets, subject to Rule 144 under the Securities Act of 1933, as amended, the Securities Act. In addition, on September 20, 2018, we filed a shelf registration statement on Form S-3 with the SEC that was declared effective by the SEC on October 9, 2018 (the Shelf Registration Statement), which permits us to offer up to $150 million of ordinary shares, preferred shares, debt securities, warrants and purchase contracts in one or more offerings and in any combination, including in units from time to time, and which permits Silver Lake to sell up to 9,256,755 of our ordinary shares from time to time. We have also filed registration statements on Form S-8 to register the total number of shares of our common stock that may be issued under the SMART Global Holdings, Inc. 2017 Share Incentive Plan (the SGH Plan), including the equity awards issued to our executive officers and directors, and shares purchased under the SMART Global Holdings, Inc. 2018 Employee Share Purchase Plan (ESPP). As of August 30, 2019, there are 2,297,758 options outstanding to purchase our ordinary shares, and 1,078,218 RSUs outstanding under the SGH Plan, and there are 1,427,339 additional shares available for issuance under the SGH Plan and 540,090 shares available for purchase under the ESPP. These ordinary shares can be freely sold in the public market upon issuance under the SGH Plan or purchase under the ESPP subject to any restrictions on such shares pursuant to the respective plan documents.

47

In addition, certain of our existing shareholders and holders of options and RSUs, in the event they become exercisable, have the right to demand that we file a registration statement covering the offer and sale of their ordinary shares and shares issuable under such options and RSUs under the Securities Act and to require us to include their securities on a registration statement filed by us. While these holders, other than Silver Lake, waived their right to include their shares in the Shelf Registration Statement, if we file a registration statement in the future for the purpose of selling additional ordinary shares to raise capital and are required to include ordinary shares held by these shareholders pursuant to the exercise of their registration rights, our ability to raise capital may be impaired. In addition, if we conduct an offering under our Shelf Registration Statement, our ability to raise capital in such offering may be impaired.

We cannot predict the size of future sales or issuances of our ordinary shares or the effect, if any, that such future sales and issuances would have on the market price of our ordinary shares.

The requirements of being a public company have and will continue to increase our costs and may disrupt the regular operations of our business.

As a public company, our legal, accounting, reporting and other administrative costs have and will continue to increase.

We also anticipate that we will continue to incur costs associated with corporate governance requirements, including requirements under the Sarbanes-Oxley Act, as well as rules implemented by the SEC and NASDAQ. We expect these rules and regulations to increase our legal and financial compliance costs and make some management and corporate governance activities more time consuming and costly, particularly now that we are no longer an “emerging growth company.” These rules and regulations may make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. This could have an adverse impact on our ability to recruit and bring on qualified directors.

The additional demands associated with being a public company may disrupt regular operations of our business by diverting the attention of some of our senior management team away from revenue producing activities to management and administrative oversight, adversely affecting our ability to attract and complete business opportunities and increasing the difficulty in both retaining professionals and managing and growing our businesses. Any of these effects could harm our business, financial condition and results of operations.

While we were an “emerging growth company” under the JOBS Act, our independent registered public accounting firm was not required to attest to the effectiveness of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act. We are no longer an emerging growth company as of the beginning of our fiscal 2018, and our independent registered public accounting firm is required to attest to the effectiveness of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act as of August 31, 2018.  In addition, in connection with the implementation of the necessary procedures and practices related to internal control over financial reporting, we may identify deficiencies that we may not be able to remediate in time to meet the deadline imposed by the Sarbanes-Oxley Act for compliance with the requirements of Section 404. Failure to comply with Section 404 could subject us to regulatory scrutiny and sanctions, impair our ability to raise revenue, cause investors to lose confidence in the accuracy and completeness of our financial reports and negatively affect the price of our ordinary shares.

We no longer qualify as an “emerging growth company” and will be required to comply with certain provisions of the Sarbanes-Oxley Act and can no longer take advantage of reduced disclosure requirements.

For as long as we remained an emerging growth company, we could take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in its periodic reports and proxy statements, and exemptions from the requirements of holding a non-binding advisory vote on executive compensation. We no longer qualify for such status, and as we are no longer an emerging growth company, we expect to incur additional expenses and devote substantial management effort toward ensuring compliance with those requirements applicable to companies that are not emerging growth companies.

48

Anti-takeover provisions in our organizational documents may discourage our acquisition by a third party, which could limit shareholders’ opportunity to sell their ordinary shares at a premium.

Our amended and restated memorandum and articles of association include provisions that could limit the ability of others to acquire control of us, modify our structure or cause us to engage in change of control transactions. These provisions include, among other things:

These provisions could deter, delay or prevent a third party from acquiring control of us in a tender offer or similar transactions, even if such transaction would benefit our shareholders. Even in the absence of a takeover attempt, the existence of these provisions may adversely affect the prevailing market price of our ordinary shares if they are viewed as discouraging future takeover attempts.

As of October 18, 2019, 40% of our outstanding ordinary shares were owned by Silver Lake and their affiliates, including certain of our directors and our Chief Executive Officer.

We do not anticipate paying any cash dividends in the foreseeable future.

We currently intend to retain our future earnings, if any, for the foreseeable future, to repay indebtedness and to fund the development and growth of our business. We do not intend to pay any dividends to holders of our ordinary shares. In addition, our Amended Credit Agreement contains restrictions on our ability to pay dividends. As a result, capital appreciation in the price of our ordinary shares, if any, will be your only source of gain on an investment in our ordinary shares.

Item 1B.  Unresolved Staff Comments.

None.

49

Item 2.  Properties

We have facilities in Newark, Fremont and Irvine California; Atibaia, Brazil; Penang, Malaysia; Gilbert and Tempe, Arizona; New Taipei City, Taiwan; Seongnam-City, South Korea; Tewksbury, Massachusetts; Bangalore and Cochin, India; East Kilbride, Scotland; and Houston, Texas.

We also lease a number of smaller design, planning and sales facilities worldwide.

Item 3.  Legal Proceedings

We are currently involved in, and may in the future be involved in, legal proceedings, claims and government investigations in the ordinary course of business. We are involved in litigation, and may in the future be involved in litigation, with third parties asserting, among other things, infringement of their intellectual property rights. We are currently involved in several proceedings, including the following:

50

Indemnification Claims by SanDisk

In August 2013, we completed the sale (the Sale) of substantially all of the business unit which was focused on solid state drives, to SanDisk Corporation (now a part of Western Digital). In connection with the Sale the sale agreement (Sale Agreement) contained certain indemnification obligations, including, among others, for losses arising from breaches of representations and warranties relating to the Sale. These indemnification obligations are subject to a number of limitations, including certain deductibles and caps and limited time periods for making indemnification claims. On August 21, 2014, SanDisk made a claim against us under the indemnification provisions of the Sale Agreement in connection with a lawsuit filed by Netlist, Inc. (Netlist) against SanDisk alleging that certain products sold in the Sale infringe various Netlist patents, which SanDisk in turn alleges would, if true, constitute a breach of representations and warranties under the Sale Agreement. Under the Sale Agreement, our indemnification obligation in respect of intellectual property matters, such as those claimed by SanDisk, is subject to a deductible of approximately $1.8 million and a cap of $60.9 million. As required in the Sale Agreement, the SanDisk claim purported to include a preliminary good faith estimate of SanDisk’s alleged indemnifiable losses, which estimate was greater than the Sale Agreement cap for intellectual property matters. We believe that the allegations giving rise to the indemnification claim are without merit and we intend to dispute SanDisk’s claim for indemnification. In addition, there may be other grounds for us to dispute the indemnification claim and/or the amounts of any indemnifiable losses of SanDisk.

Netlist

On September 10, 2012, SMART Modular filed a complaint in the Eastern District of California (the EDCA) against Netlist alleging infringement of certain claims of SMART Modular’s U.S. Patent No. 8,250,295 (the ‘295 patent) and seeking, among other things, a preliminary injunction. Netlist filed certain counterclaims alleging, among other things, attempted monopolization, collusion, unfair competition, fraud on the U.S. Patent and Trademark Office (the USPTO) and sham litigation, and asserting that the ‘295 patent is invalid.

In July 2013, Netlist filed a lawsuit in the Central District of California against SMART Modular alleging claims very similar to Netlist’s counterclaims set forth in the EDCA case. Netlist later amended its complaint to add additional parties, including SMART Worldwide. Netlist has sought compensatory damages for the harm it claims to have suffered, as well as an award of treble damages and attorneys’ fees. The claims against SMART Modular and SMART Worldwide were transferred to the EDCA.

In January 2019 the parties entered into stipulated settlements to dismiss with prejudice, all claims and counterclaims in both actions with no amounts for damages being paid by either party and with each party to bear their own costs.

Import Duty Tax assessment in Brazil

On February 23, 2012, SMART Brazil was served with a notice of a tax assessment for approximately R$117.0 million (or $31.1 million) (the First Assessment). The First Assessment was from the federal tax authorities of Brazil and related to four taxes in connection with the importation processes. The tax authorities claimed that SMART Brazil categorized its imports of unmounted integrated circuits in the format of wafers under an incorrect product classification code, which carries an import duty of 0%. The authorities alleged that a different classification code should have been used that would require an 8% import duty and the authorities were seeking to recover these duties, as well as other related taxes, for the five calendar years of 2007 through and including 2011. Subsequent to the initial assessment, SMART Brazil received a second notice of an additional administrative penalty of approximately R$6.0 million (or $1.6 million) directly related to the same issue and which has been imposed exclusively for the alleged usage of an inappropriate import tax code (the Second Assessment).

51

In March 2012, SMART Brazil filed defenses to the First Assessment and the Second Assessment. On May 2, 2013, the first level administrative tax court issued a ruling in favor of the tax assessor and against SMART Brazil on the First Assessment. On May 31, 2013, SMART Brazil filed an appeal to the second level tax court known as CARF. The appeal was heard on November 26, 2013 and SMART Brazil received a unanimous favorable ruling rejecting the position of the tax authorities. Subsequently, the tax authorities filed a request for clarification and on September 17, 2014, SMART Brazil received a unanimous ruling rejecting the request from the tax authorities for clarification. On November 7, 2014, the tax authorities notified CARF that they would not be appealing the CARF decision, and the First Assessment has been extinguished. On February 6, 2018, the first level administrative court unanimously ruled in favor of SMART Brazil with respect to the Second Assessment. Due to the size of the Second Assessment, Brazil law required that the tax authorities appeal the decision to CARF. The appeal on the Second Assessment was heard on December 11, 2018 and SMART Brazil received a unanimous favorable ruling rejecting the position of the tax authorities. The tax authorities did not file any request for clarification or appeal and, as a result, the Second Assessment was extinguished in May 2019.

On December 12, 2013, SMART Brazil received another notice of assessment in the amount of R$3.6 million (or $1.0 million) with respect to the same import-related tax issues and penalties discussed above for 2012 and 2013 (the Third Assessment). The Third Assessment does not seek import duties and related taxes on Dynamic Random Access Memory (DRAM) products and only seeks import duties and related taxes on Flash unmounted components with respect to the months of January 2012 to June 2012. This is because SMART Brazil’s imports of DRAM unmounted components were subject to 0%, and, after June 2012, SMART Brazil’s imports of Flash unmounted components became subject to 0%, import duties and related taxes, both as a result of PADIS. Even with this 0%, if SMART Brazil is found to have used the incorrect product classification code, SMART Brazil will be subject to an administrative penalty equal to 1% of the value of the imports. SMART Brazil has filed defenses to the Third Assessment. The Company believes that SMART Brazil used the correct product code on its imports and that the Third Assessment is incorrect. SMART Brazil intends to vigorously fight this matter. Although SMART Brazil did not receive the Third Assessment until December 12, 2013, the Third Assessment was issued before the CARF decision in favor of SMART Brazil on the First Assessment as discussed above was published.

The amounts claimed by the tax authorities on the Third Assessment are subject to increases for interest and other charges, which resulted in a combined assessment balance of approximately R$5.6 million (or $1.5 million) as of August 30, 2019.

As a result of the CARF decisions in favor of SMART Brazil on the First Assessment and the Second Assessment, we believe that the probability of any material charges as a result of the Third Assessment is remote and we do not expect the resolution of this disputed assessment to have a material impact on its consolidated financial position, results of operations or cash flows. While we believe that the Third Assessment is incorrect, there can be no assurance that SMART Brazil will prevail in the disputes.

Item 4.  Mine Safety Disclosures.

Not applicable.

52

Part II.

Item 5.  Market For Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information for Ordinary Shares

On May 24, 2017, our ordinary shares began trading on the NASDAQ Global Select Market under the symbol “SGH”. Prior to that date, there was no public trading market for our common stock. Shares sold in our initial public offering, or IPO, were priced at $11.00 per share on May 23, 2017.

Holders

As of October 18, 2019 there were 83 registered holders of record of our ordinary shares (not including beneficial holders of our ordinary shares in street names).

Dividends

We have not paid any cash dividends on our ordinary shares, and we do not currently intend to pay any cash dividends on our ordinary shares in the foreseeable future. We currently intend to retain all available funds and any future earnings to support operations and to finance the growth and development of our business. Any future determination to pay dividends will be made at the discretion of our board of directors subject to applicable laws and will depend upon, among other factors, our results of operations, financial condition, contractual restrictions and capital requirements. Our future ability to pay cash dividends on our capital stock may also be limited by the terms of any future debt or preferred securities or future credit facility.

Unregistered Sales of Equity Securities

SMART EC Acquisition

In connection with the SMART EC acquisition as described in Item 15, Consolidated Financial Statements, Note 2, the seller is entitled to earn-out payments of up to $10 million based on achievement of specific gross revenue levels through December 31, 2019 plus additional earn-out payments of $0.10 for each dollar of gross revenue through December 31, 2019 over an agreed upon achievement level. The earn-out is payable, at our option, in either cash or in the ordinary shares of SMART Global Holdings, Inc., par value $0.03 per share, the Shares, with each of the Shares to be valued at the volume weighted average daily price of the Shares as traded on the Nasdaq Global Select Market and reported on Bloomberg, measured over the ten trading-day period of such Shares immediately preceding and ended December 30, 2019. In the event that any earn-out is achieved and we elect to pay the earn-out consideration in Shares, then, pursuant to the Artesyn SPA, we will use our reasonable best efforts to (i) cause a registration statement on Form S-3 to be filed with the U.S. Securities and Exchange Commission on or before the forty-fifth day following the earn-out determination date with respect to the resale of such Shares by the seller and (ii) cause such registration statement to become effective and to remain effective until the first to occur of (A) such time that all such Shares have been sold by seller and (B) the first anniversary of the date of such effectiveness.

In the event that any earn-out is achieved and we elect to pay the earn-out consideration in Shares, then such Shares will be issued in reliance upon the exemption from registration available under Section 4(a)(2) of the Securities Act, including Regulation D promulgated thereunder. We did not engage in any form of general solicitation or general advertising in connection with the transaction to acquire AEC. Seller also represented that it was an “accredited investor” as defined in the Securities Act, and that it would be acquiring the Shares for its own account and not for distribution. All Shares issued in this transaction will have a legend stating that these Shares have not been registered under the Securities Act and cannot be transferred until properly registered under the Securities Act or an exemption applies. This exemption is based on certain representations, warranties, agreements, and covenants contained in the Artesyn SPA.

53

SMART Wireless Acquisition

In connection with the acquisition of SMART Wireless, as described in Item 15, Consolidated Financial Statements, Note 2, SMART Global Holdings, Inc., issued 382,788 Shares as part of the merger consideration and retained as security for the sellers’ indemnification obligations as well as any post-closing adjustments to the purchase price (the Holdback), $0.7 million in cash and 67,550 in Shares. The Shares issued and to be issued in connection with this transaction are also subject to a lock-up period, pursuant to which the Shares may not be sold by for one year following the closing date of July 9, 2019.

All of the Shares issued in the SMART Wireless transaction were issued in reliance upon the exemption from registration available under Section 4(a)(2) of the Securities Act, including Regulation D promulgated thereunder. SMART Global Holdings, Inc. did not engage in any form of general solicitation or general advertising in connection with the Inforce transaction. Each of the Inforce shareholders receiving Shares also represented that it was an “accredited investor” as defined in the Securities Act and that it was acquiring such securities for its own account and not for distribution. All Shares issued in this transaction have a legend stating that these Shares have not been registered under the Securities Act and cannot be transferred until properly registered under the Securities Act or an exemption applies. This exemption is based on certain representations, warranties, agreements, and covenants contained in the merger agreement entered into in connection with this transaction.

Stock Performance Graph

This performance graph shall not be deemed “soliciting material” or to be “filed” with the Securities and Exchange Commission, or the SEC, for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or the Exchange Act, or otherwise subject to the liabilities under that Section, and shall not be deemed to be incorporated by reference into any of our filings under the Securities Act of 1933, as amended, or the Securities Act, except as shall be expressly set forth by specific reference in such filing.

The following performance graph shows the cumulative total stockholders return of an investment of $100 in cash on August 31, 2018 through August 30, 2019, in our common stock, the NASDAQ Composite Index and Philadelphia Semiconductor Index and assuming that all dividends were reinvested. The stock price performance on the following graph is not necessarily indicative of future price performance of our stock.

54

Item 6.  Selected Financial Data

The following tables present our historical selected consolidated financial data. The selected consolidated statement of operations data for the years ended August 30, 2019, August 31, 2018 and August 25, 2017, and the selected consolidated balance sheet data as of August 30, 2019 and August 31, 2018 are derived from our audited consolidated financial statements that are included elsewhere in this report. The selected statement of operations data for the year ended August 26, 2016 and August 28, 2015, and the selected consolidated balance sheet data as of August 25, 2017, August 26, 2016 and August 28, 2015 are derived from our audited consolidated balance sheet as of such dates and is not included in this report. Our historical results are not necessarily indicative of the results that may be expected in the future.

We maintain our books and records in U.S. dollars and prepare our consolidated financial statements in accordance with U.S. GAAP.

This financial information should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements, including the notes thereto, included elsewhere in this report.

55

We have included Adjusted EBITDA in this report because it is a key measure used by our management and board of directors to understand and evaluate our core operating performance and trends, to prepare and approve our annual budget and to develop short-term and long-term operational and compensation plans. In particular, the exclusion of certain non-cash, non-recurring or infrequent expenses in calculating Adjusted EBITDA can provide useful measures for period-to-period comparisons of our core business. Accordingly, we believe that Adjusted EBITDA provides useful information to investors and others in understanding and evaluating our operating results in the same manner as our management and board of directors.

Adjusted EBITDA has limitations as an analytical tool, and you should not consider this measure in isolation or as a substitute for analysis of our results as reported under U.S. GAAP. Some of these limitations are:

56

Because of these limitations, you should consider Adjusted EBITDA along with other financial performance measures, including various cash flow metrics, net income (loss) and our other U.S. GAAP results. A reconciliation of Adjusted EBITDA to net income (loss) is provided below: