SmartMetric, Inc. - Quarter Report: 2018 December (Form 10-Q)

UNITED STATES 

SECURITIES AND EXCHANGE COMMISSION 

Washington, D.C. 20549

FORM 10-Q

(Mark One)

For the quarterly period ended December 31, 2018

For the transition period from ___________ to ___________.

Commission file number 000-54853

SMARTMETRIC, INC.

 (Exact name of registrant as specified in its charter)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☐ No ☒

Indicate by check mark whether the registrant is large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The number of shares outstanding of the registrant’s Common Stock, $0.0001 par value per share, as of February 2, 2019, was 256,676,745.

INDEX

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

In this Quarterly Report on Form 10-Q, references to “SmartMetric, Inc.,” “SmartMetric,” “SMME,” “the Company,” “we” “us,” and “our” refer to SmartMetric, Inc. Also, any reference to “common shares,” or “common stock” refers to our $0.001 par value common stock. Also, any reference to “preferred stock” or “preferred shares” refers to our $0.001 par value Series B Convertible Preferred Stock.

This Quarterly Report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended. These statements relate to our business development plans, timing strategies, expectations, anticipated expense levels, business prospects, business outlook, technology spending and various other matters (including contingent liabilities and obligations and changes in accounting policies, standards and interpretations). These statements express our current intentions, beliefs, expectations, strategies or predictions as well as historical information. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “may,” “will,” “could,” “continue,” and similar expressions or variations of such words are intended to identify forward-looking statements, but are not deemed to represent an all-inclusive means of identifying forward-looking statements as denoted in this Quarterly Report. Additionally, statements concerning future matters are forward-looking statements.

Although forward-looking statements in this Quarterly Report reflect the good faith judgment of our management, such statements can only be based on facts and factors currently known by us. Consequently, forward-looking statements are inherently subject to risks and uncertainties and actual results and outcomes may differ materially from the results and outcomes discussed in or anticipated by the forward-looking statements. These statements are no guarantee of future performance and involve risks and uncertainties that are difficult to predict. Our future operating results are dependent upon many factors which are outside our control. You should not place undue reliance on forward-looking statements. Forward-looking statements may not be realized due to a variety of factors, including, without limitation, our ability to:

We undertake no obligation to revise or update any forward-looking statements in order to reflect any event or circumstance that may arise after the date of this Quarterly Report, except as required by federal securities laws. Readers are urged to carefully review and consider the various disclosures made throughout the entirety of this Quarterly Report, which are designed to advise interested parties of the risks and factors that may affect our business, financial condition, results of operations and prospects.

SMARTMETRIC, INC. AND SUBSIDIARY

Consolidated Balance Sheets

See notes to consolidated financial statements.

SMARTMETRIC, INC. AND SUBSIDIARY

Consolidated Statements Of Operations

See notes to consolidated financial statements.

SMARTMETRIC, INC. AND SUBSIDIARY

Consolidated Statements Of Cash Flows

See notes to consolidated financial statements.

SMARTMETRIC INC. AND SUBSIDIARY

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

SmartMetric, Inc. (“SmartMetric” or the “Company”) was incorporated pursuant to the laws of Nevada on December 18, 2002. SmartMetric is a company engaged in the technology industry. SmartMetric’s main products are a fingerprint sensor activated payments card and a security card with a finger sensor and fully functional fingerprint reader embedded inside the card. The SmartMetric biometric cards have a rechargeable battery allowing for portable biometric identification and card activation. This card is referred to as a biometric card or the SmartMetric Biometric Card.

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with generally accepted accounting principles for interim financial information and with the instructions to Form 10-Q and Regulation S-X. Accordingly, they do not include all the information and footnotes required by generally accepted accounting principles for complete financial statements. In the opinion of management of the Company, the accompanying unaudited financial statements contain all the adjustments (which are of a normal recurring nature) necessary for a fair presentation. Operating results for the six months ended December 31, 2018 are not necessarily indicative of the results that may be expected for the year ending June 30, 2019. For further information, refer to the financial statements and the footnotes thereto contained in the Company’s Annual Report on Form 10-K for the year ended June 30, 2018, as filed with the Securities and Exchange Commission on October 12, 2018.

Going Concern

As shown in the accompanying condensed consolidated financial statements the Company has sustained recurring losses of $420,116 and $509,227 for the six months ended December 31, 2018 and 2017 respectively, and has an accumulated deficit of $26,417,027 at December 31, 2018.

There is no guarantee that the Company will be able to continue to raise enough capital or generate revenues to sustain its operations. There is no guarantee regarding the Company’s ability to continue as a going concern.

Management believes that the Company’s capital requirements will depend on many factors. These factors include product marketing and distribution.

The condensed consolidated financial statements do not include any adjustments relating to the carrying amounts of recorded assets or the carrying amounts and classification of recorded liabilities that may be required should the Company be unable to continue as a going concern.

Principles of Consolidation

The condensed consolidated financial statements include the accounts of the Company and its wholly owned subsidiary, SmartMetric Australia Pty. Ltd. All significant intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying disclosures. Actual results may differ from those estimates.

Cash and Cash Equivalents

Cash equivalents are comprised of certain highly liquid investments with maturity of three months or less when purchased. We maintain our cash in bank deposit accounts which, at times, may exceed federally insured limits. We have not experienced any losses in such accounts.

Research and Development

Research and development costs are charged to expense as incurred. Our research and development expenses consist primarily of expenditures for electronics design and engineering, software design and engineering, component sourcing, component engineering, manufacturing, product trials, compensation and consulting costs.

Revenue Recognition

The Company has not recognized revenues to date. The Company anticipates recognizing revenue in accordance with the contracts it enters into for the sale and distribution of its products.

Accounts Receivable

The Company will extend credit based on its evaluation of the customers’ financial condition, generally without requiring collateral. Exposure to losses on receivables is expected to vary by customer due to the financial condition of each customer. The Company will monitor exposure to credit losses and maintains allowances for anticipated losses considered necessary under the circumstances. The Company has not recorded any receivables, and therefore no allowance for doubtful accounts.

Uncertainty in Income Taxes

GAAP requires the recognition and measurement of uncertain income tax positions using a “more-likely-than-not” approach. Management evaluates Company tax positions on an annual basis and has determined that as of December 31, 2018 no accrual for uncertain income tax positions is necessary.

The Company files income tax returns in the United States (“U.S.”) federal jurisdiction. Generally, the Company is no longer subject to U.S. federal examinations by tax authorities for fiscal years prior to 2014. The Company does not file in any other jurisdiction and remains open for audit for all tax years as the statute of limitations does not begin until the returns are filed.

Advertising Costs

The Company will expense the cost associated with advertising as incurred.

Equipment

Equipment is stated at cost. Depreciation is computed using the straight-line method over the estimated economic useful lives of the assets ranging from 3 - 5 years.

Loss Per Share of Common Stock

Basic net loss per common share is computed using the weighted average number of common shares outstanding. The calculation of diluted earnings per share (“EPS”) includes consideration of dilution arising from common stock equivalents, such as stock issuable pursuant to the exercise of stock options and warrants. Common stock equivalents were not included in the computation of diluted earnings per share on the consolidated statement of operations due to the fact that the Company reported a net loss and to do so would be anti-dilutive for the periods presented.

Stock-Based Compensation

The Company measures expense for issuances of stock-based compensation to employees and others at fair value of the stock and warrants issued, as this is more reliable than the fair value of the services received complete. The fair value of the equity instrument is charged directly to compensation expense and additional paid-in capital.

Prepaid expenses represent the unexpired terms of various consulting agreements as well as advance rental payments. The Company issued common stock and warrants as consideration for consulting services and these shares were valued based on the stock price or computed warrant value at the time of the respective agreements.

Lease Agreement

The Company’s main office is located in Las Vegas, Nevada. Rent expense under all leases for the six months ended December 31, 2018 and 2017 was $7,277 and $15,938 respectively.

Related Party Transactions

The Company’s Chief Executive Officer has made cash advances to the Company with an aggregate amount due of $18,520 and $15,000 at December 31, 2018 and June 30, 2018, respectively. These advances bear interest at the rate of five percent (5%) per annum.

The Company has accrued the amounts of $758,348 and $663,348 at December 31, 2018 and June 30, 2018, respectively, as deferred officer’s salary, for the difference between the Chief Executive Officer’s annual salary and the amounts paid.

On September 11, 2017, we received a license to certain patents from Chaya Hendrick, our founder and CEO, related to our technologies until the expiration of the patents. As consideration, we issued Chaya Hendrick, or her assigns, (i) 200,000 shares of Series B Convertible Preferred Stock, (ii) a royalty equal to 5% of gross revenues derived from products sold related to the patents, and (iii) certain minimum required payments beginning at $50,000 and doubling each year thereafter. The Series B Preferred Shares may be converted at the election of holder on a basis for 50 common shares for each preferred share at any time or an aggregate of 10,000,000 common shares in exchange for all 200,000 preferred shares.

Preferred Stock

As of December 31, 2018, the Company has 5,000,000 shares of preferred stock, par value $0.001, authorized and 610,000 shares issued and outstanding.

On December 11, 2009, the Company filed a Certificate of Designation with the State of Nevada, to designate 500,000 shares of preferred stock as Series B Convertible Preferred Stock (“Series B Convertible Preferred Stock”). Effective November 5, 2014, the number of shares designated as Series B Convertible Preferred Stock was increased to 1,000,000 shares.

Each share of Series B Convertible Preferred Stock has a par value of $0.001, and a stated value equal to $5.00 (“Stated Value”). Holders of the Series B Convertible Preferred Stock are entitled to receive dividends or other distributions with the holders of the common stock of the Company on an as converted basis when, as, and if declared by the directors of the Company. Holders of the Series B Convertible Preferred Stock are entitled to convert each share of the Series B Convertible Preferred Stock into fifty (50) shares of common stock.

Upon any liquidation, dissolution or winding-up of the Company, whether voluntary or involuntary, holders of the Series B Convertible Preferred Stock are entitled to receive out of the assets, whether capital or surplus, of the Company an amount equal to the Stated Value, pro rata with the holders of the common stock.

Class A Common Stock

As of December 31, 2018, the Company has 50,000,000 shares of Class A common stock, par value $0.001, authorized and no shares issued and outstanding. In October 2003, the Company issued 50,000,000 shares of Class A common stock at par value ($50,000). These shares were converted into 50,000,000 shares of common stock in 2006.

Common Stock

The Company was incorporated on December 18, 2002, with 45,000,000 shares of Common Stock, par value $0.001, authorized. The Articles of Incorporation were amended in 2006 to increase the number of authorized shares to 100,000,000 shares, and in 2009 to increase the number of authorized shares to 200,000,000. As a result of a screener’s error, the Company previously disclosed in its Quarterly Report on Form 10-Q for the quarters ended September 30, 2015 and December 31, 2015 that it increased the number of authorized shares of common stock to 300,000,000. On March 31, 2016, our Board of Directors approved an amendment (the “Amendment”) to the Company’s Articles of Incorporation to increase the total number of shares of authorized capital stock to 305,000,000 shares, par value $0.001 per share, consisting of (i) 300,000,000 shares of Common Stock, up from 200,000,000 shares of Common Stock, and (ii) 5,000,000 shares of Preferred Stock, subject to shareholder approval (the “Proposal”). On March 31, 2016, a majority of the Company’s stockholders approved the Amendment. The Company filed a definitive information statement on Schedule 14C with the Securities and Exchange Commission on May 4, 2016 (the “Information Statement”). The Information Statement was furnished to all of the Company’s shareholders for the purpose of informing them of the action taken by a majority of the Company’s stockholders.

As of December 31, 2018, the Company has 256,676,745 shares of common stock issued and outstanding.

Warrants

From time to time the Company granted warrants in connection with private placements of securities, as described herein.

As of December 31, 2018, and June 30, 2018, the following is a breakdown of the warrant activity:

December 31, 2018:

June 30, 2018:

At December 31, 2018, all of the 20,257,155 warrants are vested and (i) 27,555,665 warrants expire at various times prior to December 4, 2020, (ii) 3,000,000 warrants expire in September 2019, (iii) and 300,000 warrants expire in July 2020.

The Company provides for income taxes at the end of each interim period based on the estimated effective tax rate for the full fiscal year. Cumulative adjustments to the Company’s estimate are recorded in the interim period in which a change in the estimated annual effective rate is determined.

The Company has estimated its effective tax rate to be 0%, based primarily on losses incurred and the uncertainty of realization of the tax benefit of such losses.

From time to time we may be a defendant or plaintiff in various legal proceedings arising in the normal course of our business. As of the date of this Quarterly Report, there are no material pending legal or governmental proceedings relating to us or properties to which we are a party, and, to our knowledge, there are no material proceedings to which any of our directors, executive officers or affiliates are a party adverse to us or which have a material interest adverse to us.

There were no subsequent events at the time of filing.

Overview

SmartMetric, Inc. (“SmartMetric” or the “Company”) was incorporated pursuant to the laws of Nevada on December 18, 2002. SmartMetric is a company engaged in the technology industry. SmartMetric has an issued patent covering technology that involves connection to networks using data cards (smart cards and EMV cards). In addition, SmartMetric holds the sole license to five issued patents covering features of its biometric fingerprint activated cards. SmartMetric’s main products are a fingerprint sensor activated payments card and a security card with a finger sensor and fully functional fingerprint reader embedded inside the card. The cards have a rechargeable battery allowing for portable biometric identification and card activation. These cards are herein sometimes referred to as a biometric card or the SmartMetric Biometric Card.

The Market for Biometric Credit Cards

According to a to a press release issued by Goode Intelligence, an independent market research company, regarding their October 2018 report on the biometrics payment sector, nearly 579 million biometric credit/debit cards will be in use over the next five (5) years. Goode Intelligence believes* there is a significant market opportunity for biometric payment cards. and forecasts that by 2023 there will be almost 579 million biometric payment cards in use around the world.

“Contactless card payments are even outperforming mobile in many regions. Many consumers prefer to use a contactless payment card over a mobile payment equivalent and according to Goode Intelligence research, many users would like to use cards in contactless mode for higher value transactions. Biometric payment cards not only offer improved security by removing the PIN but also allow frictionless payments for higher value transactions,” stated Good Intelligence.

SmartMetric engaged an outside independent research company to survey a statistically relevant sample of Visa credit card holders in the United States. One of the questions asked showed that nearly 67% of these credit card holders would be willing to pay $69.95 for a biometric secured credit card.

The survey asked:

Would you pay for a safer biometric secured credit card that has a built-in fingerprint reader for your protection?

*Goode Intelligence is an independent analyst and consultancy company that provides quality advice to global decision makers in business and technology.

Goode Intelligence works in information security, mobile security, authentication and identity verification, biometrics, enterprise mobility and mobile commerce sectors.

Founded in 2007 by Alan Goode and headquartered in London, Goode. Intelligence helps both technology providers, investors and IT purchasers make strategic business decisions based on quality research, insight and consulting.

The SmartMetric Biometric Technology and Products

SmartMetric’s founder, Chaya Hendrick is the originator and inventor of various miniature biometric activated cards, including the SmartMetric biometric fingerprint activated payments card with an embedded fully functional fingerprint reader inside. the card. The card is the size and thickness of a standard credit card. The SmartMetric biometric payments card provides for high level security for credit and debit cards by adding biometric authentication and activation to Europay, MasterCard and Visa (“EMV”) chip cards in use around the world. The SmartMetric biometric payments card has been manufactured to be totally interoperable with existing EMV chip card readers, ATMs as well as banking payments infrastructure. Using the advanced electronic miniaturization by SmartMetric to make its biometric credit/debit cards the Company has also created a multi-functional biometric building access control and logical network access card.

Since July 1, 2018, SmartMetric has commenced efforts towards creating a biometric health insurance card with memory for storing a person’s medical files, including medical images. This allows a person to securely take with them their private medical files inside the card when traveling away from home. For the first time, a person’s complete medical files can be stored in a credit card-sized card and the information is only able to be accessed by the card holder’s own fingerprint. The company is in discussion with significant health membership organizations concerning the offering of the SmartMetric Biometric Medical Records card to their respective members.

SmartMetric has developed its rechargeable battery powered fingerprint reader that is of a scale that fits “inside” a standard credit or debit card. The cardholder has stored inside the card his or her fingerprint. To activate the card the person swipes the fingerprint sensor, the sensor is connected to an internal microprocessor that manages the fingerprint sensor fingerprint image capture and comparison matching with the pre-stored fingerprint of the cardholder held in the internal electronic memory of the card. The card has a surface mounted EMV chip as found on EMV banking chip cards that is activated or turned on only after a card holder’s fingerprint has been scanned and verified using the SmartMetric miniature “in-card” biometric scanner.

There are over seven (7) billion EMV chip cards used by banks around the world for credit cards, ATM cards and debit cards according to EMVco. SmartMetric sees this existing user base as a natural market for its advanced biometric activated card technology for the credit and debit card market. SmartMetric has established a network of card manufacturers and technology distributors to market its in-card biometric products to card issuing banks and in the case of the SmartMetric biometric security card, to businesses.

SmartMetric has completed development of its biometric card and is now actively marketing its card to major card issuing banks throughout the world in partnership with established card distributors and dealers.

SmartMetric has also developed a multi-function logical and physical access security card this size and thickness of a standard credit card. Utilizing the small size breakthroughs by the Company in its biometric payments card development, SmartMetric has successfully developed a biometric security card that is the size and thickness of a standard credit card that can easily fit inside a person’s wallet.

As with the biometric payments card, the SmartMetric security card has an internal rechargeable battery that is used to power the card’s internal processor used in the biometric fingerprint scan. All functions and operations of the card are subject to a valid fingerprint scan and match of the card user.

On February 1, 2019, SmartMetric entered into a manufacturing and license agreement with Servired, SA. Servired operates the major payments network in Spain for credit and debit card transactions. Servired is owned by 65 Banks as shareholders and has over 100 Banks in Europe, the United States and South America as customers and users of its technology.

The Servired Advantis EMV Chip and operating system is being used by Banks around the world on their Debit and Credit Cards. 1.3 Billion Servired Advantis cards have been issued by their member banks worldwide.

SmartMetric is now in the process of manufacturing it’s biometric credit/debit card with the ServiRed Advantis payments card chip and operating system. This will allow over 100 Banks worldwide who are already using the ServiRed Advantis chip and chip card operating system to easily issue this new SmartMetric – ServiRed/Advantis biometric credit and debit card.

Additional technological advances have now been made on both the Company’s biometric credit/debit card and its multifunction cyber security, building access biometric card.

In Card Fingerprint Matching and Verification

The SmartMetric Biometric card incorporates a rechargeable, lithium polymer battery. This battery is rechargeable, very thin and has been designed by SmartMetric to fit inside the SmartMetric fingerprint credit card sized card. This battery is manufactured by a third party unaffiliated with the Company to SmartMetric’s specifications. This battery is embedded inside the card.

Other components needed for manufacture of the SmartMetric Biometric Card include, but are not limited to, sensors, microchips, memory chips and processor chips. The ultra-thin circuit board developed by SmartMetric has, in total, nearly 200 active and passive components. The sources and availability of these materials are numerous, readily available and should not affect the ability of SmartMetric to meet future demand. The supply of memory processors and passive components may be interrupted at any time based on global supply/demand issues. We have not experienced component supply issues to date and the Company, as a matter of policy, has alternative component sources to mitigate and protect against supply chain issues.

The biometric card has been designed to offer the option of a built-in radio frequency transmitter for contactless access and identity verification. The RFID contactless chip transmission is turned on using the card users fingerprint verification.

The thinness form factor of many of the components, has also resulted in the Company having to develop its own process for high volume electronic assembly. The Company has also successfully overcome the challenge of developing a process of encapsulating the electronics in plastic to create the credit card sized biometric fingerprint activated card that also has an internal rechargeable battery.

Standard credit card manufacturing utilizes machines that require high pressure and high temperature in fusing top and bottom sheets of plastic together thereby encasing any electronics inside the card. Given the complexity of the card’s electronics and vulnerability to an assembly process involving high heat and high pressure, damage to the electronic circuitry was a major challenge for the Company to overcome. Research and development activities of the Company allowed the Company to achieve this ability through a trade secret process that protects the silicon and internal battery that is mounted directly onto the card’s internal electronics circuit board.

The Security Technology Industry

SmartMetric Biometric Multi-Function Security Card

The Access management market is estimated to grow from USD 8.09 billion in 2016 to USD 14.82 billion by 2021

SmartMetric has developed a multi-function logical and physical access security card this size and thickness of a standard credit card. Utilizing the small size breakthroughs by the Company in its biometric payments card development, SmartMetric has successfully developed a biometric security card that can easily fit inside a person’s wallet.

As with the biometric payments card, the SmartMetric security card has an internal rechargeable battery that is used to power the card’s internal processor used in the biometric fingerprint scan. All functions and operations of the card are subject to a valid fingerprint scan and match of the card user.

The main features of the SmartMetric biometric security card are:

Cybersecurity and identity validation for network access control, physical building entry and secure on-the-spot identity security is now handled by the revolutionary biometric activated cyber and ID multi-function security card which has been developed by SmartMetric after over a decade of R&D.

From governments to the workplace, better, stronger security is desired across the enterprise. Our new biometric multifunction security card provides a revolutionary biometric based solution that is portable, easily integrated and backward compatible to existing backend security infrastructure.

The new multifunction biometric security card by SmartMetric is a revolutionary leap forward in the Cyber and Access Security world according to SmartMetric.

Access management market is estimated to grow from USD 8.09 billion in 2016 to USD 14.82 billion by 2021, at a CAGR of 12.9% between 2016 and 2021 according to a recent research report by KBV Research in a publication titled Identity & Access Management Market – Global Forecast by Marqual IT Solutions Pvt. Ltd (KBV Research) November 2016 KBV Research is a name owned by IT Solutions Pvt. Ltd.

Biometrics

Biometric technologies identify users by electronically capturing a specific biological or behavioral characteristic of that individual, such as a fingerprint or voice or facial feature, and creating a unique digital identifier from that characteristic. Because this process relies on largely unalterable human characteristics, positive identification can be achieved independent of any information possessed by the individual seeking authorization.

The process of identity authentication typically requires that a person present for comparison with one or more of the following factors:

Comparison of biological and behavioral characteristics has historically been the most reliable and accurate of the three factors but has also been the most difficult and costly to implement into a single product that can automatically verify the identity of a user accessing a computer network or the Internet. However, recent advances in biometric collection technologies (both biometric hardware products and their associated processing software) have increased the speed and accuracy and reduced the cost of implementing biometrics in commercial environments. Management believes that individuals, website operators, government organizations, and businesses will increasingly use this method of identity authentication.

Biometrics refers to the automatic identification of a person based on his/her physiological or behavioral characteristics. This method of identification is preferred over traditional methods involving passwords and personal identification numbers (“PINs”) for two reasons: (i) the person to be identified is required to be physically present at the point of identification to be identification; and (ii) identification based on biometric techniques obviates the need to remember a password or carry a token. By replacing PINs, biometric techniques can potentially prevent unauthorized access to or fraudulent use of cellular phones, Biometric cards, desktop PCs, workstations and computer networks. It can be used during transactions conducted via telephone and Internet (e-commerce and e-banking). In automobiles, biometrics could replace keys-less entry devices. The SmartMetric fingerprint activated credit card that has the fingerprint encased inside the credit card has been developed to replace the less secure PIN’s for credit and debit cards.

PINs and passwords may be forgotten, may be hacked and token-based methods of identification, e.g., passports and driver’s licenses, may be forged, stolen or lost. Various types of biometric systems are being used for real-time identification, with the most popular based on facial recognition and fingerprint matching. Other biometric systems utilize iris and retinal scanning, speech, facial thermograms and hand geometry. Of the biometric options available to work with a credit or debit card, fingerprint scanning is the only biometric methodology that has been successfully reduced in size to fit inside such cards.

A biometric system is essentially a pattern recognition system, which makes a personal identification by determining the authenticity of a specific physiological or behavioral characteristic possessed by the user. An important issue in designing a practical system is to determine how an individual is identified.

There are two different ways to resolve a person’s identity; verification and identification. Verification (Am I whom I claim I am?) involves confirming or denying a person’s claimed identity. In identification, one has to establish a person’s identity (Who am I?).

As stated above, the SmartMetric fingerprint biometric card has been designed as a credit-card sized card embedded with an integrated circuit, contact chip and biometric fingerprint sensor. The SmartMetric card has been designed to provide not only memory capacity, but also computational capability along with secure non-refutable identification of the user. We believe that the self-containment of SmartMetric’s card makes it substantially resistant to attack, as it will not need to depend upon vulnerable external resources. Because of this characteristic, we expect that the SmartMetric biometric card may be used in different applications, which require strong security protection and authentication.

The physical structure of a card is specified by the International Standards Organization (“ISO”). Generally, this structure is made up of three elements: (i) the plastic card, which is the most basic one and has the dimensions of 85.60mm x 53.98 x 0.80mm; (ii) an electronic circuit board inlay; and (iii) a contact chip that are embedded in the card.

The SmartMetric card has been designed to conform to ISO standards. The electronic circuit inlay is a part of, and not distinct from, the biometric card.

The communication line between the card and ATMs and other standard Smart Card reading devices is bi-directional serial transmission, which conforms to ISO standards. Card commands and input data are sent to the chip that responds with status words and output data upon the receipt of these commands and data. Information is sent in half duplex mode (transmission of data is in one direction at a time). This protocol, together with the restriction of the bit rate, is designed to prevent data attack on the card. Other data protection systems are utilized inside the card including advanced encryption.

In general, the size, the thickness and bend requirements for the biometric card were designed to protect the card from being spoiled physically.

Going Concern

Our auditors’ report on our June 30, 2018 financial statements expressed an opinion that there is a substantial doubt about our ability to continue as a going concern. The Company continues to rely on direct equity investment in the Company through the sale of shares by way of private placement offerings.

Critical Accounting Policies

We have prepared our financial statements in conformity with accounting principles generally accepted in the United States, which requires management to make significant judgments and estimates that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of expenses during the reporting period. We base these significant judgments and estimates on historical experience and other applicable assumptions we believe to be reasonable based upon information presently available. These estimates may change as new events occur, as additional information is obtained and as our operating environment changes. These changes have historically been minor and have been included in the financial statements as soon as they became known. Actual results could materially differ from our estimates under different assumptions, judgments or conditions.

All of the Company’s significant accounting policies are discussed in Note 2, Summary of Significant Accounting Policies, to our financial statements, included elsewhere in this Quarterly Report. We have identified the following as our significant accounting policies and estimates, which are defined as those that are reflective of significant judgments and uncertainties, are the most pervasive and important to the presentation of our financial condition and results of operations and could potentially result in materially different results under different assumptions, judgments or conditions.

We believe the following critical accounting policies reflect our more significant estimates and assumptions used in the preparation of our financial statements:

Use of Estimates - The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying disclosures. Actual results may differ from those estimates.

Cash and Equivalents - Cash equivalents are comprised of certain highly liquid investments with maturity of three months or less when purchased. We maintain our cash in bank deposit accounts which, at times, may exceed federally insured limits. We have not experienced any losses in such accounts.

Research and Development Costs - Research and development costs are charged to expense as incurred. Our research and development expenses consist primarily of expenditures for electronics design and engineering, software design and engineering, component sourcing, component engineering, manufacturing, product trials, compensation and consulting costs.

Results of Operations

Comparison of the Three Months Ended December 31, 2018 and 2017

Our results of operations have varied significantly from year to year and quarter to quarter and may vary significantly in the future. We did not have revenue for the three months ending December 31, 2018 and 2017. Net loss for the three months ended December 31, 2018 and 2017 were $206,790 and $260,270, respectively, resulting from the operational activities described below.

Operating Expenses

Operating expense totaled $193,432 and $249,690 during the three months ended December 31, 2018 and 2017, respectively. The decrease in operating expenses is the result of the following factors.

Research and Development

Research and development expenses totaled $21,775 and $24,832 for the three months ended December 31, 2018 and 2017, respectively. The decrease of $3,057, or 12.3%, in 2018 compared to 2017 was primarily attributable to decreased engineering expenses. Our research and development expenses consist primarily of expenditures related to engineering.

General and Administrative

General and administrative expenses totaled $124,157 and $177,358 for the three months ended December 31, 2018 and 2017, respectively. The decrease of $53,201 or 30.0%, in 2018 compared to 2017 was primarily the result of a decrease in consulting expenses. Our general and administrative expenses consist primarily of expenditures related to employee compensation, legal, accounting and tax, other professional services, and general operating expenses.

Other Income (Expense)

Other income (expense) totaled $13,358 and $10,580 for the three months ended December 31, 2018 and 2017, respectively.

Interest income (expense)

We had net interest expense of $13,358 in the three months ended December 31, 2018 compared to $10,580 net interest expense for the three months ended December 31, 2017. The increase of $2,778 was attributable to interest expenses related to accrued but unpaid salary of our CEO pursuant to an amended and restated employment agreement entered into on July 1, 2017.

Comparison of the Six Months Ended December 31, 2018 and 2017

Our results of operations have varied significantly from year to year and quarter to quarter and may vary significantly in the future. We did not have revenue for the six months ending December 31, 2018 and 2017. Net loss for the six months ended December 31, 2018 and 2017 were $420,116 and $509,227, respectively, resulting from the operational activities described below.

Operating Expenses

Operating expense totaled $394,296 and $488,989 during the six months ended December 31, 2018 and 2017, respectively. The decrease in operating expenses is the result of the following factors.

Research and Development

Research and development expenses totaled $51,135 and $41,432 for the six months ended December 31, 2018 and 2017, respectively. The increase of $9,703, or 23.4%, in 2018 compared to 2017 was primarily attributable to increased engineering expenses. Our research and development expenses consist primarily of expenditures related to engineering.

General and Administrative

General and administrative expenses totaled $248,161 and $352,557 for the six months ended December 31, 2018 and 2017, respectively. The decrease of $104,398 or 29.6%, in 2018 compared to 2017 was primarily the result of a decrease in consulting expenses. Our general and administrative expenses consist primarily of expenditures related to employee compensation, legal, accounting and tax, other professional services, and general operating expenses.

Other Income (Expense)

Other income (expense) totaled $25,820 and $20,238 for the six months ended December 31, 2018 and 2017, respectively.

Interest income (expense)

We had net interest expense of $25,820 in the six months ended December 31, 2018 compared to $20,238 net interest expense for the six months ended December 31, 2017. The increase of $5,582 was attributable to interest expenses related to accrued but unpaid salary of our CEO pursuant to an amended and restated employment agreement entered into on July 1, 2017.

Liquidity and Capital Resources

We have incurred losses since our inception in 2002 as a result of significant expenditures for operations and research and development and the lack of any revenue. We have an accumulated deficit of approximately $26,417,027 as of December 31, 2018 and anticipate that we will continue to incur additional losses for the foreseeable future. Through December 31, 2018, we have funded our operations through the private sale of our equity securities and exercises of options and warrants, resulting in gross proceeds of approximately $26.5 million from inception through December 31, 2018. Cash and cash equivalents at December 31, 2018 were $5,073.

Net Cash Used in Operating Activities

Net cash used in operating activities was $254,703 and $335,505 for the six months ended December 31, 2018 and 2017, respectively. The decrease of $80,802 in cash used during 2018 compared to 2017 was primarily attributable to a decrease in consultant costs.

Net Cash Used in Investing Activities

Cash used in investing activities was $0 and $0 for the six months ended December 31, 2018 and 2017, respectively.

Net Cash Provided by Financing Activities

During the six months ended December 31, 2018, we received net proceeds of $255,349 from the sales of our securities, compared to $369,187 for the six months ended December 31, 2017. The decrease was due to lower sales of the Company’s securities in private placements. We continue to seek funding through private placement sales of equity to fund our continued operations, sales and marketing and ongoing research and development programs.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are not required to provide the information required by this item as we are considered a smaller reporting company, as defined by Rule 229.10(f)(1).

ITEM 4. CONTROLS AND PROCEDURES

We maintain “disclosure controls and procedures,” as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”), that are designed to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in Securities and Exchange Commission rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating our disclosure controls and procedures, management recognized that disclosure controls and procedures, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the disclosure controls and procedures are met. Additionally, in designing disclosure controls and procedures, our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible disclosure controls and procedures. The design of any disclosure controls and procedures also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

As of December 31, 2018, we carried out an evaluation, under the supervision and with the participation of our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were sufficient.

Limitations on Controls

Management does not expect that the Company’s disclosure controls and procedures or the Company’s internal control over financial reporting will prevent or detect all error and fraud. Any control system, no matter how well designed and operated, is based upon certain assumptions and can provide only reasonable, not absolute, assurance that its objectives will be met. Further, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the Company have been detected. The Company’s disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives and the Company’s chief executive officer and chief financial officer have concluded that the Company’s disclosure controls and procedures are effective at that reasonable assurance level.

Changes in Internal Controls

During the three months ended December 31, 2018, there have been no changes in our internal control over financial reporting that have materially affected or are reasonably likely to materially affect our internal controls over financial reporting.

PART II. OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

From time to time we may be a defendant or plaintiff in various legal proceedings arising in the normal course of our business. We know of no material, active, pending or threatened proceeding against us or our subsidiaries, nor are we, or any subsidiary, involved as a plaintiff or defendant in any material proceeding or pending litigation.

ITEM 1A. RISK FACTORS

In addition to the other information set forth in this report, you should carefully consider the risk factors discussed in Part I, Item 1A in our Annual Report on Form 10-K for the year ended June 30, 2018 filed with the SEC on October 12, 2018 and our subsequent filings with the Securities and Exchange Commission, which could materially affect our business, financial condition or future results. These cautionary statements are to be used as a reference in connection with any forward-looking statements. The factors, risks and uncertainties identified in these cautionary statements are in addition to those contained in any other cautionary statements, written or oral, which may be made or otherwise addressed in connection with a forward-looking statement or contained in any of our subsequent filings with the Securities and Exchange Commission.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

The following information is given with regard to unregistered securities sold since October1, 2018 and not previously reported on a Current Report on Form 8-K. The following securities were issued in private offerings pursuant to the exemption from registration contained in the Securities Act and the rules promulgated thereunder in reliance on Section 4(a)(2) thereof of the Securities Act of 1933, as amended and Regulation D and Regulation S promulgated thereunder, relating to offers of securities by an issuer not involving any public offering.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None.

ITEM 4. MINE SAFETY DISCLOSURES

Not Applicable.

ITEM 5. OTHER INFORMATION

None.

ITEM 6. EXHIBITS

INDEX TO EXHIBITS

* In accordance with SEC Release 33-8238, Exhibits 32.1 and 32.2 are being furnished and not filed

SIGNATURE

In accordance with the requirements of the Exchange Act, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.