Stabilis Solutions, Inc. - Annual Report: 2008 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2008

OR

For the transition period from              to             

Commission File No. 000-24575

AMERICAN ELECTRIC TECHNOLOGIES INC.

(Exact name of registrant as specified in its charter)

6410 Long Drive, Houston, TX 77087

(Address of principal executive offices)

(713) 644-8182

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

As of June 30, 2008, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was $24,573,153 based on the closing sale price on June 30, 2008 as reported on the National Association of Securities Dealers Automated Quotation System National Market System.

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date.

DOCUMENTS INCORPORATED BY REFERENCE

Table of Contents

The Description of Business section and other parts of this Annual Report on Form 10-K (“Form 10-K”) contain forward-looking statements that involve risks and uncertainties. Many of the forward-looking statements are located in “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Forward-looking statements provide current expectations of future events based on certain assumptions and include any statement that does not directly relate to any current or historical fact. Forward-looking statements can also be identified by words such as “anticipates,” “believes,” “estimates,” “expects,” “intends,” “plans,” “predicts,” and similar terms. Forward-looking statements are not guarantees of future performance and the Company’s actual results may differ significantly from the results discussed in the forward-looking statements. Factors that might cause such differences include, but are not limited to, those discussed in the subsection entitled “Risk Factors” under Part I, Item 1A of this Form 10-K. The Company assumes no obligation to revise or update any forward-looking statements for any reason, except as required by law.

PART I

Company Background and Corporate Structure

American Electric Technologies, Inc. (“the Company”, “AETI”, “our”, “us” or “we”) was incorporated on October 21, 1996 as a Florida corporation under the name American Access Technologies, Inc. On May 15, 2007, we completed a business combination (the “M&I Merger”) with M&I Electric Industries, Inc. and changed our name to American Electric Technologies, Inc. Our principal executive offices are located at 6410 Long Drive, Houston, Texas 77085 and our telephone number is 713-644-8182. Prior to the M&I Merger our business consisted of the operations of the American Access segment described below.

Our corporate structure currently consists of American Electric Technologies, Inc., which owns 100% of both M&I Electric Industries, Inc. (“M&I”) and American Access Technologies, Inc. (“AAT”). We report financial data for three operating segments: the Technical Products and Services (“TP&S”) segment and the Electrical and Instrumentation Construction (“E&I”) segment which together encompass the operations of M&I including its South Coast Electric Systems, LLC subsidiary and the American Access (“AAT”) segment which encompasses the operations of American Access including its Omega Metals division.

Products and Services

Our M&I Electric business has provided sophisticated custom-designed and built-to-order power delivery, control and drive systems for energy, marine and industrial applications since 1946. These products are used to safely distribute and control the flow of electricity from the power source to machinery, equipment and other critical processes. We also provide a full range of electrical and instrumentation, construction and installation services to our customers. The principal markets and representative customers that we serve include:

1

Table of Contents

AAT manufactures patented zone cabling and wireless enclosures for routing of telecommunications cabling, fiber optics and wireless solutions to the workplace environment. The Omega Metals division of AAT provides precision sheet metal fabrication and assembly services to a diverse client base primarily in the Southeast. Representative customers of AAT include Chatsworth Products, Inc., Tyco Electronics and Panduit.

We have adopted a strategy of international expansion and have developed the expertise to provide products which comply with international electrical design and test standards. Our products are offered in a number foreign countries through a network of overseas sales agents and distributors that we have appointed. We have also expanded internationally through a 40% interest in a joint venture which commenced manufacturing operations in China in 2007 and a 49% interest in a joint venture in Singapore that was established in 1985.

Our business strategy is to grow our business and operations in our various market sectors, seek out new markets for our products and services, while at the same time increasing earnings and cash flow per share to enhance overall stockholder value. We upgrade and innovate our products. We also seek new markets for our products such as power generated from alternative energy sources such as wind, solar, geothermal and nuclear.

We are organized into three reportable business segments, based on the nature of our products and services:

The Technical Products and Services (“TP&S”) segment designs and manufactures products for the safe and efficient distribution of power at low and medium voltages. Our switchgear products control the flow of power and protect electrical equipment such as motors, transformers and cables. Our variable speed drives are electronic controls used to adjust the speed and torque of an electric motor to match an end application. Products offered by this segment include low and medium voltage switchgear, generator control and distribution switchgear, motor control centers, powerhouses, bus duct, direct current drives, variable speed alternating current drives, program logic control (“PLC”) based automation systems, human machine interface (“HMI”) and specialty panels. Our products are built for application voltages from 480 volts to 38,000 volts and are used in a wide variety of industries. Our customers for these products are large and sophisticated users of electrical energy for industrial purposes. The primary markets we serve include the oil and gas exploration and production industry encompassing offshore and land drilling, pipelines, service and production vessels, and land and offshore production, as well as the petrochemical and refining industry. Other markets include water and wastewater facilities and shipbuilding.

All of our power distribution and control products are custom-designed and built-to-order to our customers’ requirements for specific installations and we do not maintain an inventory of such products. We work closely with our customers to design each project to safely and efficiently supply electric service and protection products for their specific needs.

Besides providing customers with our own designed and manufactured power distribution and control systems we provide a variety of technical services to assist our customers with their power distribution and control systems including retrofits, upgrades, installation and startup, testing and troubleshooting of substations, switchgear, drives and control systems.

The Electrical and Instrumentation Construction (“E&I”) segment provides a full range of electrical and instrumentation construction and installation services to both land and marine based markets including the oil and gas industry, the water and wastewater facilities industry and other commercial and industrial markets. This segment’s services include electrical and instrumentation turnarounds, maintenance, renovation and new

2

Table of Contents

construction. Applications include installation of switchgear, AC and DC motors, drives, motor controls, lighting systems and high voltage cable. Marine based oil and gas services include complete electrical system rig-ups, modifications, start-ups and testing for vessels, drilling rigs, and production modules. We have the technical expertise to provide these products in compliance with a number of applicable industry standards such as NEMA (“National Electrical Manufacturers Association”) and ANSI (“American National Standards Institute”) or IEC (“International Electrotechnical Commission”) equipment to meet ABS (“American Bureau of Shipping”), USCG (“United States Coast Guard”), Lloyd’s Register, a provider of marine certification services, and Det Norske Veritas (a leading certification body/registrar for management systems certification services) standards. These services are generally provided to customers within the vicinity of Houston, Texas and occasionally on a worldwide basis.

The American Access (“AAT”) segment consists of our historic business prior to the M&I Merger. This segment manufactures and markets zone cabling enclosures and manufactures custom formed metals products. The zone cabling product line provides state-of-the-art flexible cabling and wireless solutions for the high-speed communication networks found throughout office buildings, hospitals, schools, industrial complexes and government buildings. Our patented enclosures mount in ceilings, walls, raised floors, and certain modular furniture to facilitate the routing of telecommunication network cabling, fiber optics and wireless solutions in a streamlined, flexible, and cost effective fashion. Omega Metals operates a precision sheet metal fabrication and assembly operation and provides services such as precision “CNC” (“Computer Numerical Controlled”) punching, laser cutting, bending, assembling, painting, powder coating and silk screening to a diverse client base including, engineering, technology and electronics companies, primarily in the Southeast.

Segment Financial Data

The following table sets forth certain financial data concerning our operating segments. The American Access segment was added in the second quarter of 2007 upon the closing of the M&I Merger.

We do not generally review and analyze most of our assets on a segment basis for TP&S and E&I and therefore all assets for these segments are recorded within the corporate segment’s records. Depreciation expense is apportioned to the segments based on management’s best estimate. Corporate unallocated expenses include compensation costs and other expenses that cannot be meaningfully associated with the individual segments. Except for Equity in Joint Venture Income, all other costs, expenses and other income have been allocated to the segments based on sales which management believes is the best available basis to apportion these elements of income and expense to the segments.

3

Table of Contents

International Sales

In general, approximately 25% to 35% of TP&S sales are sold into international markets. These sales are made in US dollars and are generally settled prior to shipment or are secured by irrevocable letters of credit. All E&I sales are made in the United States although some services are performed internationally. All of AAT’s sales are made in the United States.

Marketing

We market our Technical Products and Services in the United States through direct contact with potential customers by our internal sales organization consisting of five full-time sales and support employees who report to M&I’s President. In addition, the marine, marine drilling and international markets are served by three full time employees who report to the Sr. Vice President of Business Development. We also exhibit at three industry trade shows each year—the Offshore Technology Conference held in Houston, the American Wind Energy Association(“AWEA”) Annual Conference and the International Work Boat Show held in New Orleans. We have appointed several sales agents and distributors in the U.S. and in a number of foreign countries.

Our E&I business is generally obtained through a sealed bid process where the lowest bid from pre-qualified contractors wins the job. We also act as a subcontractor and provide bids to general contractors for specialized parts of larger projects.

Our American Access segment markets its zone cabling products through an exclusive marketing agreement with Chatsworth Products, Inc. (“CPI”) which began under an original agreement in May 2003 that ran through May 2008. The agreement was extended to April 2013. Under this agreement CPI markets and American Access manufactures our zone cabling products and select products are co-branded with both CPI and American Access trademarks. We also have primary responsibility for sales of zone cabling products to original equipment manufacturers. Our Omega Metals division utilizes geographically-based independent manufacturers’ representatives to generate sheet metal fabrication sales. Omega Metals’ vice president of sales also calls on accounts and coordinates the sales efforts.

Manufacturing

Manufacturing processes at our various facilities include machining, fabrication, subassembly, system assembly and final testing. We have invested in various automated and semi-automated equipment for the fabrication and machining of various parts and assemblies that we incorporate into our products. Our quality assurance program includes various quality control measures from inspection of raw material, purchased parts and assemblies through on-line inspection. We perform system design, assembly and testing in-house. Our manufacturing operations in Beaumont, Texas and Keystone Heights, Florida are ISO 9001-2000 certified.

Raw Materials and Suppliers

The principal raw materials for our products are copper, steel, aluminum and various manufactured electrical components. We obtain these products from a number of domestic and foreign suppliers. The market for most of the raw materials and parts we use is comprised of numerous participants and we believe that we can obtain each of the raw materials we require from more than one supplier. We do not have any long term contractual arrangements with the suppliers of our raw materials.

Joint Ventures

We have utilized joint ventures to drive growth in key international markets. We believe our joint ventures provide a prudent way to diversify and reduce the risk of international expansion, capitalize on the strengths and the relationships of our joint venture partners with potential customers, and achieve competitive efficiencies.

4

Table of Contents

China. In March 2006, M&I entered into a joint venture with Baoji Oilfield Machinery Co., Ltd., (“BOMCO”), a wholly-owned subsidiary of the China National Petroleum Corporation, and AA Energies, Inc. of Houston, Texas, which markets oilfield equipment, to form BOMAY Electric Industries Co., Ltd., as an equity joint venture limited liability company organized in China. M&I is a 40% interest owner in BOMAY with 51% being owned by BOMCO and the remaining 9% owned by AA Energies. BOMAY was organized to manufacture land and marine-based power systems for drilling rigs as well as low and medium voltage switchgear for the Chinese and global markets. M&I has invested 16 million Yuan (approximately $2 million) in this joint venture. in which M&I will provide technology and services to BOMAY. The investment in BOMAY as of December 31, 2008 is $4,972,005 and includes $2,258,273 equity in 2008 income. Each of the BOMAY investors may be required to guarantee the bank loans of BOMAY in proportion to their investment. No guarantees have been provided by AETI. BOMAY commenced construction of a 60,000 square foot manufacturing facility in the Xi’an, China Hi-tech Industries Development Zone in March 2007. The BOMAY factory was completed and initial production of products commenced in October 2007. We account for our interest in the BOMAY joint venture under the equity method of accounting for which we recognized income of $2,258,273 and $1,348,000 in 2008 and 2007, respectively. The joint venture is obligated to pay M&I an amount equal to 0.7% of the joint venture’s initial three years sales as a technology transfer fee. We were paid $330,000 in 2008 in connection with this fee. We recorded sales of $738,061 to BOMAY in 2008. We had an account receivable of $24,691 from BOMAY as of December 31, 2008.

Singapore. We own 49% of M & I Electric Far East PTE Ltd. (MIEFE) which provides additional sales and technical support in for our products in southeast Asia. Our joint venture partner is Oakwell Engineering, Ltd. Our equity in income of the joint venture was $363,071, $351,700 and $184,588 for the years ended December 31, 2008, 2007 and 2006 ,respectively. Sales made to the joint venture were $178,157, $536,638 and $103,285 for the years ended December 31, 2008, 2007 and 2006, respectively. Accounts receivable from MIEFE were $218,494, $40,336 and $101,684 at December 31, 2008, 2007 and 2006, respectively. Sales to the joint venture are made with terms and conditions similar to those of our other customers.

Competition

Our products and services are sold in highly competitive markets. We compete in all areas of our operations with a number of companies, some of which have financial and other resources comparable to or greater than us. Due to the demanding operating conditions in the energy sector and the high costs associated with construction delays and equipment failure, we believe customers in this industry prefer suppliers with a track record of reliable performance. We seek to build strong long-term relationships with our customers by maintaining our reputation as a provider of high-quality, efficient and reliable products and services, by developing new products and services and by responding promptly to our customers’ needs.

The principal competitive factors in our markets are product and service quality and reliability, lead time, price, technical expertise and reputation. We believe our principal competitive strengths include the following:

Our ability to provide technical products and services and electrical and instrumentation construction services are complementary, permitting us to offer customers total system responsibility for their electrical power control and distribution needs. Our ability to provide turn-key solutions and eliminate the need for our customers to deal with multiple suppliers and contractors on complex projects is an important competitive advantage.

Our power delivery, control and drive systems are custom-designed and are built-to-order to meet our customers’ specific requirements. We specialize in projects that are complex, require industry certification, short lead time or other non-standard elements, such as systems that must be fit into the confined space of a work boat or drilling rig.

We have a history of innovation in developing and commercializing new technologies into our products. Examples include digitally controlled drives, liquid-cooled high horsepower AC variable frequency drives which

5

Table of Contents

are optimized for space-constrained marine applications and American Access’ zone cabling solutions. We have also expanded the market for our products both internationally and to additional end-user markets.

Our commitment to providing quality products and services, fair pricing, innovation and customer service is the foundation to the long-standing customer relationships that we enjoy with an attractive customer base. Since 1946, we have provided over 10,000 power delivery systems to many of the leading companies involved in oil and gas exploration, drilling, production, pipelines, shipbuilding, oil refineries, petrochemicals, power generation, and steel industries in the U.S. Gulf Coast area.

We are led by an experienced management team with a proven track record. We believe the experience of our management team provides us with an in-depth understanding of our customers’ needs and enhances our ability to deliver customer-driven solutions. We believe our management has fostered a culture of loyalty, resulting in high employee retention rates for our professional and technical employees.

We have identified the following as our largest competitors:

In switchgear and control systems—Point 8 Power, Siemens, Eaton, GE, ABB Volta, AZZ and Powell Industries

In drive systems—National Oilwell Varco, Louisiana Electric Rig,, ABB, Siemens and LeTourneau Technologies

In technical testing services-Infrasource/Dashiel and Electrical Controller Products ( Square D)

Backlog

Backlog represents the dollar amount of revenue we expect to realize in the future as a result of performing work under multi-month contracts. Backlog is not a measure defined by generally accepted accounting principles, and our methodology for determining backlog may not be comparable to the methodology used by other companies in determining their backlog. Backlog may not be indicative of future operating results. Not all of our potential revenue is recorded in backlog for a variety of reasons, including the fact that some contracts begin and end within a short-term period. Many contracts are subject to modification or termination by the customer. The termination or modification of any one or more sizeable contracts or the addition of other contracts may have a substantial and immediate effect on backlog.

We generally include total expected revenue in backlog when a contract for a definitive amount of work is entered into. We generally expect our backlog to become revenue within one year from the signing of a contract.

The principal reason for the decline in backlog from the prior year is the approximately $10 million reduction in new school construction work. The Company announced its withdrawal from that market in late 2007 due to the poor earnings prospects that existed.

Intellectual Property

We have a number of patents related to the technology of our zone cabling enclosures as well as trademarks and trade names utilized with our products and services. While proprietary intellectual property is important to the Company, management believes the loss or expiration of any intellectual property right would not materially impact the Company or any of its segments.

6

Table of Contents

Environmental Laws

We are subject to various federal, state, and local laws enacted for the protection of the environment. We believe we are in compliance with such laws. Our compliance has, to date, had no material effect on our capital expenditures, earnings, or competitive position.

Employees

As of February 27, 2009, we had 401 employees. No employees are covered by a collective bargaining agreement, and we consider our relations with our employees to be satisfactory.

You should carefully consider each of the following risks associated with an investment in our common stock and all of the other information in this 2008 Annual Report on Form 10-K. Our business may also be adversely affected by risks and uncertainties not presently known to us or that we currently believe to be immaterial. If any of the events contemplated by the following discussion of risks should occur, our business, prospects, financial condition and results of operations may suffer.

Customers in the oil and gas industry account for a significant portion of our sales. Reduced expenditures by customers in this industry are likely to reduce our revenues, profitability and cash flows.

Customers related to the oil and gas industry accounted for approximately 40% of our sales in 2008, 2007 and 2006. The oil and gas industry is a cyclical commodity business, with product demand and prices based on numerous factors such as general economic conditions and local, regional and global events and conditions that affect supply, demand and profits. While demand for our products and services has benefited from recent high demand and prices experienced by our customers in this industry, a decline in demand or prices for oil and gas will likely cause a decrease in demand for our products and services and result in a decline in our revenues, profit margins and cash flows.

Our products include complex systems for energy and industrial markets which are subject to operational and liability risks.

We are engaged in the manufacture and installation of complex power distribution and control systems for the energy and industrial markets. These systems are frequently complex and susceptible to unique engineering elements that are not tested in the actual operating environment until commissioned. As a result, we may incur unanticipated additional operating and warranty expenses that were not anticipated when the fixed-price contracts were estimated and executed resulting in reduced profit margins on such projects.

The industries in which we operate are highly competitive, which may result in a loss of market share or decrease in revenue or profit margin.

Our products and services are provided in a highly competitive environment and we are subject to competition from a number of similarly sized or larger businesses which may have greater financial and other resources than are available to us. Factors that affect competition include timely delivery of products and services, reputation, manufacturing capabilities, price, performance and dependability. Any failure to adapt to a changing competitive environment may result in a loss of market share and a decrease in revenue and profit margins.

We often utilize fixed-price contracts which could adversely affect our financial results.

We currently generate, and expect to continue to generate, a significant portion of our revenues under fixed price contracts. We must estimate the costs of completing a particular project to bid for such fixed price

7

Table of Contents

contracts. The cost of labor and materials, however, may vary from the costs we originally estimated. These variations, along with other risks inherent in performing fixed price contracts, may result in actual revenue and gross profits for a project differing from those we originally estimated and could result in reduced profitability and losses on projects. Depending upon the size of fixed price contracts, variations from estimated contract costs can have a significant impact on our operating results for any fiscal quarter or year.

We rely on a few key employees whose absence or loss could disrupt our operations or be adverse to our business.

Our continued success is dependent on the continuity of several key management, operating and technical personnel. The loss of these key employees would have a negative impact on our future growth and profitability. We have not entered into written employment agreements with any of our key personnel other than our Chief Financial Officer and the President of M&I.

Our results of operations and financial condition may be adversely impacted by rapid growth.

We have experienced a significant increase in the sales of our products and services since 2004. We cannot be certain that our personnel, systems, procedures and controls will be adequate to support our operations as they expand to meet continued growth. Any future growth also will impose significant additional responsibilities on members of our senior management, including the need to recruit and integrate new senior level managers and executives. We cannot be certain that we can recruit and retain such additional managers and executives. To the extent that we are unable to manage our growth effectively, or are unable to attract and retain additional qualified management, our financial condition and results of operations could be materially and adversely affected.

Our failure to attract and retain qualified personnel could lead to a loss of revenue or profitability.

Our ability to provide high-quality products and services on a timely basis requires that we employ an adequate number of skilled personnel. Accordingly, our ability to increase our productivity and profitability will be limited by our ability to employ, train and retain skilled personnel necessary to meet our requirements. We, like many of our competitors, are currently experiencing shortages of qualified personnel. We cannot be certain that we will be able to maintain an adequate skilled labor force necessary to operate efficiently and to support our growth strategy or that our labor expenses will not increase as a result of a shortage in the supply of skilled personnel.

Natural disasters, terrorism, acts of war, international conflicts or other disruptions could harm our business and operations.

Natural disasters, acts or threats of war or terrorism, international conflicts, and the actions taken by the United States and other governments in response to such events could cause damage to or disrupt our business operations or those of our customers, any of which could have an adverse effect on our business.

We manufacture products and operate plants in Mississippi, Texas and Florida. Operations were disrupted in 2008 due to Hurricanes Gustav and Ike and in 2005 due to Hurricanes Katrina and Rita. Although we did not suffer a material loss as a result of these disruptions due to its insurance coverage and advance preparations, it is not possible to predict future similar events or their consequences, any of which could decrease demand for our products, make it difficult or impossible for us to deliver products, or disrupt our supply chain.

We generate a significant portion of our revenues from international operations and are subject to the risks of doing business outside of the United States.

Approximately 17% of our revenues in 2008 were generated from projects and business operations outside of the United States, primarily provided to the upstream oil and gas industry in the following countries: Singapore, Australia, Mexico, Algeria, Ecuador and Dubai. This percentage was approximately 20% during in 2007. The decline from the prior year reflects the higher proportion of domestic sales provided by the American

8

Table of Contents

Access segment. The oil and gas industry operates in both remote and potentially politically unstable locations, and numerous risks and uncertainties affect our non-United States operations. These risks and uncertainties include changes in political, economic and social environments, local labor conditions, changes in laws, regulations and policies of foreign governments, as well as United States laws affecting activities of United States companies abroad, including tax laws and enforcement of contract and intellectual property rights. In addition, the costs of providing our services can be adversely and/or unexpectedly impacted by the remoteness of the locations and other logistical factors.

We entered into a joint venture with a Chinese energy services company in 2006. This investment represents our initial experience operating in China and as a result we may encounter unforeseen or unexpected operating, financial, political or cultural factors that could impact its business plans and the expected profitability from such investment. We will face risks if China loses normal trade relations with the United States and it may be adversely affected by the diplomatic and political relationships between the United States and China. As a result of the relatively weak Chinese legal system in general and the intellectual property regime in particular, we may face additional risk with respect to the protection of its intellectual property in China. Changes in China’s political and economic policies could adversely affect our investment and business opportunities in China.

Foreign Currency Transaction Risk

AETI has investments in its Singapore joint venture, M&I Electric Far East PTE, Ltd., and its Chinese joint venture, BOMAY. The functional currencies of these joint ventures are the Singapore dollar and Yuan, respectively. The investments are translated into United States dollars at the exchange rate in effect at the end of each quarterly and annual reporting period. The resulting translation adjustments, if any, are recorded as accumulated other comprehensive income in AETI’s consolidated balance sheet.

In the past several years, our investments in China and Singapore have benefitted from the general weakness of the U.S. dollar resulting in the recognition of foreign currency translation gains. During the latter part of 2008, disruptions in the global financial markets caused the U.S. dollar to strengthen, particularly against the Singapore dollar.

Other than the aforementioned items, we are not materially exposed to foreign currency exchange risks because all of our sales and purchases are denominated in United States dollars.

Commodity Price Risk

We are subject to market risk from fluctuating market prices of certain raw materials. While such materials are typically available from numerous suppliers, commodity raw materials are subject to price fluctuations. We endeavor to recoup these price increases from our customers on an individual contract basis to avoid operating margin erosion. Although historically we have not entered into any contracts to hedge its commodity risk, we may do so in the future. Commodity price changes can have a material impact on our prospective earnings and cash flows.

None

9

Table of Contents

The following table describes the material facilities of our company and its subsidiaries as of February 28, 2008. All such facilities are owned.

We are not a party to any material legal proceedings.

Not applicable

10

Table of Contents

PART II

The Company’s common stock trades on The NASDAQ Stock Market under the symbol “AETI”.

The following table sets forth quotations for the high and low sales prices for the Company’s common stock, as reported by NASDAQ, for the periods indicated below, adjusted for a 1-for-5 reverse stock spit effective May 15, 2007:

As of March 4, 2009, there were 79 shareholders of record.

The Company did not declare or pay cash dividends in either fiscal 2008 or 2007. The Company anticipates that, for the foreseeable future, it will retain any earnings for use in the operation of its business. Our bank loan agreement restricts the payment of cash dividends to stockholders.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

11

Table of Contents

The following table summarizes our consolidated financial data for the periods presented. You should read the following selected financial data in conjunction with our financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” section of this annual report. The information set forth below is not necessarily indicative of results of future operations. Since the M&I Merger has been accounted for as a reverse acquisition under the purchase method of accounting, our financial statements reflect the historical results of M&I prior to the Merger and that of the combined company following the Merger and do not include the historical results of AAT prior to the Merger. All share and per share disclosures have been retroactively adjusted to reflect the exchange of shares in the Merger and the 1-for-5 reverse split of our common stock on May 15, 2007.

Fiscal years ended December 31,

(in thousands of $ except share and per share data)

12

Table of Contents

The following discussion and analysis should be read in conjunction with the financial statements and accompanying notes appearing elsewhere in this Form 10-K. This discussion contains forward-looking statements, based on current expectations related to future events and AETI’s future financial performance that involves risks and uncertainties. AETI’s actual results may differ materially from those anticipated in these forward-looking statements as a result of many important factors, including those set forth in the section entitled “Risk Factors” in this Form 10-K.

Overview

In May 2007, M&I was a party to a reverse merger transaction in which it was legally acquired by American Access Technologies, Inc.(“AAT”). The shareholders of M&I were issued stock of AAT in amounts that in aggregate constituted approximately 80% of the total shares outstanding. As a result, the merger has been accounted for as an acquisition of AAT by M&I. Immediately following the merger, AAT’s name was changed to American Electric Technologies, Inc. Results of operations of AAT have been consolidated commencing with the merger date. References to operating results prior to the May 2007 merger date solely reflect M&I and its subsidiaries and affiliates.

Our corporate structure currently consists of American Electric Technologies, Inc., which owns 100% of both M&I Electric Industries, Inc. (“M&I”) and American Access Technologies, Inc. (“AAT”). We report financial data for three operating segments: the Technical Products and Services (“TP&S”) segment and the Electrical and Instrumentation Construction (“E&I”) segment which together encompass the operations of M&I including its South Coast Electric Systems, LLC subsidiary and the American Access (“AAT”) segment which encompasses the operations of American Access including its Omega Metals division . M&I holds a 40% and 49% interests in Chinese and Singapore joint ventures, respectively. These ventures are stand-alone operating companies and enhance our ability to provide products to these markets. Income from these ventures is reported utilizing the equity method of accounting and is included in the TP&S segment’s earnings before taxes.

AETI has experienced a substantial increase in the demand for its products and services over the past several years. In the years ended December 31, 2006, 2007 and 2008, AETI benefited from an improvement in overall market conditions. Although AETI enters 2009 with a relatively strong backlog, it is not possible to predict demand trends for its products and services in 2009 and beyond because of the global recessionary trends and disruptions in financial markets.

Results of Operations

Year ended December 31, 2008 compared to year ended December 31, 2007

Consolidated Comparison

Revenues and Gross Profit. Total consolidated net sales increased $9.7 million, or 17.5%, to $65.4 million for the year ended December 31, 2008 over the prior year. The increase occurred across all segments although the $2.8 million or 52.1% increase in American Access was primarily due to the May 2007 merger described above. Consolidated cost of sales for the year ended December 31, 2008 was $57.0 million, a $5.8 million increase, or 11.4%, over the prior year. The increase in cost of sales is primarily due to increases in net sales over the prior year. As a percentage of net sales, cost of sales in 2008 declined as a percentage of sales by approximately 4.7%. This reflects an increased percentage of higher margin technical services sales and lower warranty and startup costs for the liquid cooled AC drives that negatively impacted 2007. Consolidated gross profit during the year ended December 31, 2008 significantly increased from $4.5 million for 2007 to $8.4 million in 2008. The increase in consolidated gross margin is a result, in part, of increased sales while reducing the percentage of the cost of sales. Consolidated gross profit as a percent of net sales was 12.8% during 2008, compared to 8.1% for the prior year. This improvement reflects the changes in cost of goods sold described above.

13

Table of Contents

Selling, General and Administrative Expenses. Total consolidated selling, general and administrative expenses were $8.2 million during the year ended December 31, 2008, an increase of $2.0 million over the prior year. Approximately $0.7 million of the increase relates to the fact that AAT’s overhead expenses were not included prior to May 15, 2007. Selling expenses, primarily compensation , increased by $0.6 million. Charges for incentive plans, stock-based and otherwise increased by $0.2 million, repairs associated with Hurricane Ike approximated $0.1 million and consulting charges related to the ERP system implementation increased $0.1 million. AETI expended approximately $0.2 million in Sarbanes Oxley compliance costs. The balance of the increase in this category was occasioned by the inclusion of a full year of public company compliance costs.

Other Income and Expense. Consolidated other income and expense in 2008 declined by $0.3 million due to the realized gain on sale of marketable securities of $1.0 million in 2007 and increased interest expense($0.1 million) partially offset by increased earnings from the Chinese and Singapore joint ventures aggregating $0.9 million.

Provision for Income Taxes. Income tax expense increased by $0.6 million consistent with the increase in earnings before income tax. The effective tax rate of 35% was slightly higher than the prior year.

Net Income. Net income for the year ended December 31, 2008 was $1.7 million as compared to $0.6 million for the prior year. The increase in net income is a reflection of increased sales and gross profit partially offset by lower other income and increased selling, general and administrative expenses.

Divisional Comparisons

Technical Products & Services. The Technical Products & Services segment revenues increased $4.0 million from $30.1 million for 2007 to $34.1 million for 2008. The Technical Products & Services segment business enjoyed an approximately $1.5 million increase in its services businesses, some of which was attributable to repair work due to Hurricane Ike. Although overall revenues were strong in 2008, there was a pronounced decline in land and marine drilling rig quotations and as a result the backlog for that segment is negligible as of year end. This decline was offset by marine based drive system sales. This unit entered 2009 with a backlog of $14.4 million, comparable to the prior year, however the outlook in most of its markets is very uncertain. The segment remains committed to development of products for the alternative energy markets and it expects to commercialize some of these products in 2009.

Gross profits for the Technical Products & Services segment for 2008 were $5.2 million, a $1.3 million increase over the prior year. The increase in gross profits is primarily associated with the sales change. Its gross profit percentage increased by 2.3% relating to lower startup and warranty charges on AC drive systems and the increased higher margin services work. Technical Products & Services income before taxes for 2008 was $4.4 million compared to $3.4 million for 2007. This increase in income is a result of higher sales and related gross profit as higher equity income from joint ventures ($0.8 million) was essentially offset by increased selling and general expenses.

Electrical & Instrumentation Construction. The Construction segment reported sales of $23.2 million in 2008, an increase of $2.9 million over the prior year. The increase was due primarily to marine and powerhouse construction contracts. Approximately $10 million in each period related to new school construction projects which will not occur in 2009. The segment expects to replace most of this business with increases in wastewater construction, powerhouse projects and entry into a new market. The backlog for the Construction segment was $7.1 million as of December 31, 2008, an $11 million decline from 2007, the decrease almost exclusively due to the withdrawal from the new school construction market.

Gross profits for the Construction segment for 2008 were $1.4 million, an improvement of $2.0 million from the prior year. A substantial portion of this increase beyond the expected margin on the sales increase occurred because of an industrial contract in 2007 that incurred excess costs of $0.6 million. The Construction

14

Table of Contents

segment loss before taxes for 2008 was $0.6 million compared to a loss of $1.7 million for the previous year period. This improvement was due primarily to the change in gross profits from the prior year . The segment lost approximately $1 million in both 2007 and 2008 due to contracts in the new school construction market. The segment does not expect to incur losses from the remainder of this business in 2009.

American Access Technologies. This segment’s sales increased from $5.4 million to $8.2 million due primarily to inclusion of a full year of sales in 2008 since the acquisition became effective May 15, 2007. The segment contributed gross profits of approximately $1.9 million to the consolidated results, an increase of $0.6 million from the prior year which is consistent with the sales increase. Gross profit percentages declined slightly, by 1%, as the unit experienced considerable material price inflation during the middle part of the year. AAT commenced a program to increase its value added manufacturing customer base in 2008 which it believes will lead to enhanced revenues and operating margins in the future. In conjunction with this strategy, AAT sold almost $200,000 in products to the TP&S segment, an amount that should increase in 2009.

Year ended December31, 2007 compared to year ended December 31, 2006

Consolidated Comparison

Revenues and Gross Profit. AETI’s sales increased 23% or $10.2 million in 2007 from the prior year levels. The increase was occasioned by a $7.8 million increase in E&I construction revenues, primarily due to the entry into the commercial market in 2007. In addition, the acquisition of AAT contributed $5.4 million of sales that were not present in 2006. The TP&S segment reported a decline of $2.9 million due to sales to China in 2006 of $6 million that did not recur. The 2006 sales to China occurred prior to the start up of the Chinese joint venture. This activity is now conducted by the BOMAY joint venture and reflected as equity income. Gross profits declined by $2.9 million to $4.5 million in 2007 in comparison to prior year levels due to a 34% increase in cost of goods sold. This was due to several factors, the most significant of which was cost overruns at 3 commercial construction projects that aggregated $1.9 million. The overruns occurred primarily due to poor project management, a circumstance that has been rectified by replacement of personnel. In addition, the application of several new technologies, liquid cooled electrical drive systems for the marine industry and alternate current digital electrical drive systems, caused costs to increase over expected levels by $1.6 million. Management believes these additional costs will not be recurring and that gross profits will return to historical levels during the second half of 2008.

Selling, general and administrative expenses. These expenses were $6.2 million in 2007 or 51% higher than 2006. Consolidating the expenses from the AAT business caused an increase of $1.6 million and the additional costs associated with becoming a publicly traded company contributed an additional $0.5 million in expense. The addition of a senior marketing executive in conjunction with higher marketing and promotion expenses aggregated $0.3 million in 2007. Partially offsetting these cost increases was a reduction in management bonuses of $0.4 million due to the reduction in operating performance.

Other Income (Expense). Other Income was higher by $1.9 million in 2007 due to a $0.6 million increase in gains from the disposal of marketable securities. All such securities have been sold as of December 31, 2007. In addition, AETI’s equity in income from its joint venture affiliates increased $1.5 million in 2007 from the prior year, primarily due to the successful start up of its Chinese venture, BOMAY. This venture reported sales of $49 million (that are not consolidated). AETI reduced the reported net income from this joint venture based on the uncertainties of the operating environment and its belief that warranty and electrical system start up costs have been underestimated. The Company had increased interest expense of $0.1 million in 2007 due to increased borrowings.

Taxes on Income. Income tax expense was reduced by $1.2 million in 2007 due to reduced pretax income.

15

Table of Contents

Net Income. Net income was reduced by $1.8 million in 2007 due to the reduced gross profits and higher selling, general and administrative expenses explained above.

Divisional Comparisons

Technical Products & Services. The Technical Products & Services segment revenues decreased $2.9 million from $32.9 million for 2006 to $30.0 million for 2007. The Technical Products & Services segment business has been bolstered by the strength of the overall world economy and improvements in global drilling activity discussed above although activity in the North American drilling markets reflected a reduction in activity during the latter part of 2007. Approximately $6.0 million of the Technical Products & Services segment revenues during 2006 were derived from sales to a Chinese land drilling rig manufacturer. Sales to this customer in 2007 were recorded by BOMAY, the Chinese joint venture company. As reported above, BOMAY reported sales of $49 million in 2007 that are not consolidated.

Gross profits for the Technical Products & Services segment for 2007 were $3.9 million, a $2.4 million decrease over the prior year. This reduction is a result of reduced revenues but additionally reflected start up costs associated with two new product offerings, marine liquid cooled drives and drilling system alternate current digital drives. Technical Products & Services income before taxes for 2007 was $3.4 million compared to $ 6.3 million for 2006. This decrease in income is a result of lower sales and related gross profits partially offset by the improvement in equity income. In addition, $1.6 million of corporate overheads that had previously not been allocated were charged to the segment.

Electrical & Instrumentation Construction. The Construction segment reported sales of $20.3 million in 2007, an increase of $7.8 million over the prior year. The increase was due primarily to the Company’s increased activity in commercial markets. The commercial market increase primarily related to public school construction. The segment’s sales to the industrial, commercial and energy markets remained strong during 2007 as well. The backlog for the Construction segment was $18.7 million as of December 31, 2007, an increase of $7.0 million over the previous year.

Gross profits for the Construction segment for 2007 reflected a loss of $0.6 million, a decrease of $2.2 million from the prior year. The decline was due to losses of $1.2 million on three commercial construction contracts that resulted from poor project management. The expected gross profit on these contracts was approximately $1.0 million. The personnel associated with these contracts have been replaced and the contracts were substantially completed as of December 31, 2007. The Company expects its gross profits to return to historical levels in 2008. The Construction segment loss before taxes for 2007 was $1.7 million compared to income of $1.6 million for the previous year period. This decrease was due primarily to contract cost overruns referred to previously and the allocation of $1.1 million in corporate overheads that was not reflected in the prior year.

American Access Technologies

Revenues and Gross Profit. This segment’s sales increased $5.4 million over the prior year period due to its acquisition, effective May 15, 2007. The segment contributed gross profits of approximately $1.0 million to the consolidated results. When viewed on an annualized basis, this segment operated at essentially the same level of volume and profitability as it did in the prior year on a stand alone basis.

Liquidity and Capital Resources

As of December 31, 2008, AETI’s cash and cash equivalents were $0.1 million as compared to $0.6 million as of December 31, 2007. It is AETI’s operating practice to maintain cash balances as low as feasible while it has long term debt outstanding. Working capital was $14.8 and $14.0 million as of December 31, 2008 and December 31, 2007, respectively. Primarily as a result of this moderation in growth in working capital, AETI was

16

Table of Contents

able to repay $1.0 million on its revolving credit facility during the year. As of December 31, 2008, AETI’s current ratio is 2.34 and debt to total capitalization ratio is 16.5%. The comparable ratios for December 31, 2007 were 2.3 and 19.1%.

AETI’s long-term debt declined $0.5 million during 2008 from $5.0 million in 2007. Interest payments are current on all funded debt. At 2008 year end, AETI had a $10.0 million revolving credit facility which expires in June, 2010. This facility replaced an $8.0 million line with essentially the same terms and conditions except the maturity was extended from September, 2009. For further information regarding the terms of AETI’s indebtedness, see Notes 9 and 10 to the Consolidated Financial Statements contained elsewhere in this report.

Operating Activities

During 2008, AETI generated cash from operations in the amount of $0.5 million, a substantial increase over the $5.5 million utilization in 2007. Income from operations plus depreciation generated $1.3 million. This amount was augmented by a refund of income taxes of $0.6 million and increases in accounts payable and accrued liabilities of $0.9 million. Cash was utilized for increases in accounts receivable and inventories of $0.8 million and $1.4 million respectively. In 2007, the operating loss, net of depreciation consumed $0.9 million in cash flow. In addition, increases in accounts receivable and tax expenditures of $5.9 and $1.5 million, respectively utilized operating cash flow. Partially offsetting this utilization was reduced inventories of $0.5 million, increased accounts payable and accrued liabilities of $1.4 million, decreases in cost and estimated earnings in excess of billings, $0.5 million, and deferred income tax benefits of $0.5 million and non-cash charges to operating income of $0.1 million.

Investing Activities

During 2008, AETI generated $0.6 million in cash flow from investing activities as compared to utilization of $1.3 million in 2007. Principal elements of these investing activities included capital expenditures of $0.6 million offset by $1.2 million in dividends from joint ventures in 2008. In 2007, capital expenditures of $1.1 million and a $1.0 million investment in the China joint venture were partially offset by proceeds from the sale of marketable securities, $1.2 million. Disposals of equipment were not significant in any period.

Financing Activities

During 2008 the Company utilized cash for financing activities in connection with the payment of long term debt of $1.5 million. In addition, payments on a long term capital lease aggregated $76,430 and AETI received proceeds on common stock issuances of $21,687. In 2007, cash was generated from financing activities in the amount of $5.3 million due to an increase in long term debt, $5 million and the balance provided by proceeds from the exercise of stock options.

Contractual Obligations

As of December 31, 2008, AETI had the following contractual obligations (in thousands):

Outlook for Fiscal 2009

AETI will enter 2009 with a backlog of $21.5 million and this will provide a sound revenue base through the early part of the second quarter. After that time, the short term demand for our products and services is very

17

Table of Contents

uncertain due to global recessionary conditions and the disruptions in the financial markets. We took aggressive action in the latter part of 2008 to improve our cost structure and reduce our breakeven levels by approximately 15% to an annual run rate of $50 million. We will closely monitor our backlog and order activity and continue to adjust our cost structure and expenditures accordingly as conditions change. We expect our service businesses, including the E&I Construction segment to be able to moderate some of the expected activity decline. In addition we expect to benefit from some of our recent product and business development activities, including alternative energy markets. We will continue our initiatives in these markets. Our joint ventures have reported slow-downs in their primary markets but we continue to believe that opportunities exist for alternative energy products, particularly in China to replace the traditional decline.

We expect to be able to finance 2009’s capital expenditures and working capital needs primarily through operating cash flows. AETI believes its existing cash, working capital and unused capacity under its credit facility combined with operating earnings will be sufficient to meet its working capital needs in the immediate future.

Effects of Inflation

The significant price increases in its crucial raw materials, particularly copper and steel, and electrical components that occurred in recent years declined significantly in the latter part of 2008. The Company had been generally successful in recovering these increases from its customers in the form of increased prices. As a result, AETI has not experienced margin erosion due to inflationary pressures. Future inflationary pressures will likely be largely dependent on the worldwide demand for these basic materials which cannot be predicted at this time.

Critical Accounting Policies and Estimates

The preparation of financial statements in accordance with accounting principles generally accepted in the United States inherently involves judgments and estimates that directly impact the reported values of assets, liabilities, income and expenses. In addition, these assumptions affect the disclosures of AETI’s commitments and contingencies. The company estimates rely upon historical experience and other assumptions that management believes to be reasonable under the existing circumstances. Actual results may differ from these estimates with the benefit of hindsight. The following crucial accounting policies and estimates are important in the preparation of the company’s financial statements.

Revenue Recognition

AETI reports earnings from fixed-price and modified fixed- price long-term contracts on the percentage-of-completion method. Earnings are accrued based on the ratio of costs incurred to total estimated costs. Costs include direct material, direct labor, and job related overhead. Losses expected to be incurred on contracts are charged to operations in the period such losses are determined. A contract is considered complete when all costs except insignificant items have been incurred and the facility has been accepted by the customer. Revenue from non-time and material jobs of a short-term nature (typically less than one month) is recognized on the completed-contract method after considering the attributes of such contract. This method is used because these contracts are typically completed in a short period of time and the financial position and results of operations do not vary materially from those which would result from use of the percentage-of-completion method. The asset, “Work-in-process,” which is included in inventories, represents the cost of labor, material, and overheads on jobs accounted for under the completed-contract method. For contracts accounted for under the percentage-of-completion method, the asset, “Costs and estimated earnings in excess of billing on uncompleted contracts,” represents revenue recognized in excess of amounts billed and the liability, “Billings in excess of costs and estimated earnings on uncompleted contracts,” represents billings in excess of revenue recognized.

Concentration of Market Risk and Geographic Operations

Financial instruments which potentially subject AETI to concentrations of credit risk consist primarily of trade accounts receivable. Our market risk is dependent primarily on the strength of the oil and gas and energy

18

Table of Contents

related industries. We grant credit to customers and generally do not require collateral. Procedures are in effect to monitor the credit worthiness of its customers. During 2008 or 2007, no customers accounted for more than 10% of consolidated revenues. During 2006, one customer accounted for 13% of revenues, almost all of which was paid by year-end.

As previously described, AETI has investments in China and Singapore that aggregated $4.9 million and $1.0 million, respectively as of December 31, 2008.

Foreign Currency Gains and Losses

Foreign currency translations are included as a separate component of comprehensive income. We have determined the local currency of our foreign joint ventures to be the functional currency. In accordance with Statement of Financial Accounting Standard No. 52, Foreign Currency Translation, the assets and liabilities of our foreign equity investees, denominated in foreign currency, are translated into United States dollars at exchange rates in effect at the consolidated balance sheet date; revenues and expenses are translated at the average exchange rate for the period. Related translation adjustments are reported as comprehensive income which is a separate component of stockholders’ equity, whereas gains and losses resulting from foreign currency transactions are included in results of operations.

Federal Income Taxes

The liability method is used in accounting for federal income taxes. Under this method, deferred tax assets and liabilities are determined based on differences between financial reporting and tax bases of assets and liabilities and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. The realizability of deferred tax assets are evaluated annually and a valuation allowance is provided if it is more likely than not that the deferred tax assets will not give rise to future benefits in the company’s tax returns. AETI’s federal income tax returns through December 31, 2004 have been audited by the Internal Revenue Service. As a result of the reverse merger referred to above, the company recognized a deferred tax asset of $2,852,000 based on an estimate of the extent to which net operating loss carry forwards will be realizable.

Bad Debts

Earnings are charged with a provision for doubtful accounts based on a current review of the collectibility of the accounts. This provision is reviewed by management periodically.

Foreign Currency Transaction Risk

AETI maintains an investment in its Singapore joint venture, M&I Electric Far East PTE, Ltd. The functional currency of this joint venture is the Singapore dollar. The amount of our investment is translated into United States dollars at the exchange rate in effect at the end of each quarterly reporting period. The resulting translation adjustment is recorded as accumulated other comprehensive income in AETI’s consolidated balance sheet.

The investment in marketable securities as of December 31, 2006 consisted of common shares of Oakwell Engineering, AETI’s partner in MIEFE. Oakwell is a distributor of electrical and energy-related products. These shares trade on the Singapore Stock Exchange and are denominated in Singapore dollars.

We completed an investment of 16.0 million Yuan (approximately $2.0 million) in our Chinese joint venture, BOMAY, in March, 2007. The functional currency of this joint venture is the Chinese Yuan. BOMAY’s financial statements are translated into United States dollars at the rate prevailing at the end of each quarterly

19

Table of Contents

reporting period and any resulting adjustment is recorded as accumulated other comprehensive income in the Company’s consolidated balance sheet. Under the terms of the Equity Joint Venture Contract, we were obligated to make a total investment of 16.0 million Yuan (approximately $2.0 million) during the initial two years of the joint venture. Each of the BOMAY investors is required to guaranty the bank loans of BOMAY in proportion to their investment.

Other than the aforementioned items, we do not believe it is exposed to foreign currency exchange risk because all of our sales and purchases are denominated in United States dollars.

Commodity Price Risk

We are subject to market risk from fluctuating market prices of certain raw materials. While such materials are typically available from numerous suppliers, commodity raw materials are subject to price fluctuations. We endeavor to recoup these price increases from our customers on an individual contract basis to avoid operating margin erosion. Although historically we have not entered into any contracts to hedge its commodity risk, we may do so in the future. Commodity price changes can have a material impact on our prospective earnings and cash flows.

Reference is made to the Index on page F-1 of our Consolidated Financial Statements and Notes thereto contained herein.

Disclosure controls and procedures.

Under the direction of our Principal Executive Officer and Principal Financial Officer, we evaluated our disclosure controls and procedures as of December 31, 2008. Our Principal Executive Officer and Principal Financial Officer concluded that our disclosure controls and procedures were effective as of December 31, 2008.

Management’s annual report on internal control over financial reporting.

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(f) under the Exchange Act. Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2008. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control-Integrated Framework. Our management has concluded that our internal control over financial reporting was effective as of December 31, 2008 based on these criteria. This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to temporary rules of the SEC that permit us to provide only management’s report in this annual report.

Changes in internal control over financial reporting.

There were no changes in our internal controls over financial reporting that occurred during the quarter ended December 31, 2008 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

On January 1, 2009, Paul Katz resigned as a director.

20

Table of Contents

PART III

Directors

Information regarding our directors is incorporated by reference to the “Proposal 1—Election of Directors” and “Nominees of the Board of Directors” sections of our Proxy Statement for the 2009 Annual Meeting of Stockholders to be filed within 120 days after our December 31, 2008 fiscal year end.

Executive Officers

Information regarding executive officers is incorporated by reference to the “Executive Officers” section of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

Code of Business Conduct and Ethics

This information is incorporated by reference to the “Code of Ethics” section of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

Audit Committee; Audit Committee Financial Expert

This information is incorporated by reference to the “Audit Committee” section of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

Material Changes in Nominating Procedures

On February 6, 2009 we adopted Amended and Restated Bylaws which changed the nominating procedures for the election of directors. Stockholders are now required to provide advance notice to the Company of director nominations intended to be made at a stockholder meeting. Such notice must be received by the Secretary not later than (i) with respect to an election to be held at an annual meeting of stockholders, not later than the close of business on the 60th day and not earlier than the close of business on the 90th day prior to the first anniversary of the preceding year’s annual meeting (or if the date of the annual meeting is more than 30 days before or 60 days after such anniversary date, such notice must be so received not earlier than the close of business on the 90th day and not later than the close of business on the later of the 60th day prior to such annual meeting or the tenth day following the day on which notice of the date of the annual meeting was mailed or public disclosure thereof was made) and (ii) with respect to an election to be held at a special meeting of stockholders for the election of directors, the close of business on the seventh business day following the date on which notice of such meeting is first given to stockholders. Any such stockholder’s notice shall set forth (a) the name and address of the stockholder who intends to make a nomination; (b) a representation that the stockholder is entitled to vote at such meeting and a statement of the number of shares of the corporation that are beneficially owned by the stockholder; (c) a representation that the stockholder intends to appear in person or by proxy at the meeting to nominate the person or persons specified in the notice; (d) as to each person the stockholder proposes to nominate for election or re-election as a director, the name and address of such person and such other information regarding such nominee as would be required in a proxy statement filed pursuant to the proxy rules of the Securities and Exchange Commission had such nominee been nominated by the Board, and a description of any arrangements or understandings, between the stockholder and such nominee and any other persons (including their names), pursuant to which the nomination is to be made; and (e) the consent of each such nominee to serve as a director if elected.

This information is incorporated by reference to the “Director Compensation” and “Executive Compensation” sections of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

21

Table of Contents

EQUITY COMPENSATION PLAN INFORMATION

The following table sets forth certain information concerning shares of common stock authorized for issuance under the Company’s equity compensation plans as of December 31, 2008.

Balance of this information is incorporated by reference to the “Beneficial Ownership of Capital Stock” section of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

This information is incorporated by reference to the “Director Independence” and “Certain Relationships and Related Transactions” sections of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

This information is incorporated by reference to the “Proposal No. 2—To ratify the selection of the Company’s independent registered public accounting firm for the fiscal year ending December 31, 2009” section of our Proxy Statement for the 2009 Annual Meeting of Stockholders.

22

Table of Contents

PART IV

1. Consolidated Financial Statements and Report of Independent Registered Public Accounting Firm

See Index on page F-1.

2. Financial Statement Schedule

All financial statement schedules have been omitted, since the required information is not applicable or is not present in amounts sufficient to require submission of the schedule, or because the information required is included in the Consolidated Financial Statements and Notes thereto.

3. Exhibits

A list of exhibits filed or furnished with this report on Form 10-K (or incorporated by reference to exhibits previously filed or furnished by us) is provided in the Exhibit Index immediately following the signature pages of this report. We will furnish copies of exhibits for a reasonable fee (covering the expense of furnishing copies) upon request. Stockholders may request exhibits copies by contacting: John H. Untereker, Corporate Secretary, American Electric Technologies, Inc., 6410 Long Drive, Houston, Texas 77085.

23

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

24

Table of Contents

AMERICAN ELECTRIC TECHNOLOGIES, INC. AND SUBSIDIARIES

Consolidated Financial Statements

December  31, 2008 and 2007

Table of Contents

F-1

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders

American Electric Technologies, Inc. and Subsidiaries:

We have audited the accompanying consolidated balance sheets of American Electric Technologies, Inc. and Subsidiaries (Formerly M & I Electric Industries, Inc. and subsidiary) as of December 31, 2008 and 2007, and the related consolidated statements of operations, stockholders’ equity, and cash flows for the years then ended. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of American Electric Technologies, Inc. and Subsidiaries as of December 31, 2008 and 2007, and the results of their operations and their cash flows for the years then ended, in conformity with accepted accounting principles generally accepted in the United States of America.

We were not engaged to examine management’s assertion about the effectiveness of American Electric Technologies, Inc.’s internal control over financial reporting as of December 31, 2008 and, accordingly, we do not express an opinion thereon.

/s/    Ham, Langston & Brezina, L.L.P.

Houston, Texas

March 25, 2009

F-2

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Consolidated Balance Sheets

December 31, 2008 and 2007

See accompanying notes to consolidated financial statements.

F-3

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Consolidated Statements of Operations

For the Years Ended December 31, 2008 and 2007

See accompanying notes to consolidated financial statements.

F-4

Table of Contents

American Electric Technologies, Inc, and Subsidiaries

Consolidated Statements of Stockholders’ Equity

For the Years Ended December 31, 2008 and 2007

See accompanying notes to consolidated financial statements.

F-5

Table of Contents

American Electric Technologies, Inc, and Subsidiaries

Consolidated Statements of Cash Flows

For the Years Ended December 31, 2008 and 2007

See accompanying notes to consolidated financial statements.

F-6

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

(1)    Organization and Nature of Business

American Electric Technologies, Inc. (“AETI” or the “Company”) is the surviving financial reporting entity from a reverse acquisition of an 80% interest in American Access Technologies, Inc. by the shareholders of M&I Electric Industries, Inc. (“M&I”) on May 15, 2007. Immediately upon the completion of the reverse acquisition, American Access Technologies, Inc. changed its name to American Electric Technologies, Inc. The accompanying financial statements present the historical financial results of M&I (See Note 17). AETI is a Florida corporation and M&I, AETI’s wholly owned subsidiary, a Texas corporation. M&I has a wholly owned subsidiary, South Coast Electric Systems, LLC (“SC”), a Mississippi based company, and joint venture interests in Singapore and China. On January 1, 2008, AETI established a wholly owned subsidiary through which it conducts its American Access Technology segment’s business.

The Company has facilities and sales offices in Texas, Mississippi and Florida and minority interests in joint ventures that have facilities in Singapore and Xian, China. The Company owns the Texas facilities, comprised of 12 acres and 101,000 square feet, the Mississippi facility, comprised of 3 acres and 11,000 square feet and the Florida facility, comprised of a 67,500 square foot manufacturing facility situated on 8 ¹/2 acres of land.

AETI is comprised of three segments: Technical Products and Services (“TP&S”), Electrical and Instrumentation Construction (“E&I”) and American Access Technologies (“AAT”). The TP&S segment develops, manufactures, markets and provides switchgear and variable speed drives. These products are designed to distribute the flow of electricity, protect electrical equipment such as motors, transformers and cables, and provide variable speed drives to both AC (“alternating current”) and DC (“direct current”) motors. Products offered by this segment include low and medium voltage switchgear, generator control and distribution switchgear, motor control centers, powerhouses, bus duct, variable frequency AC drives, variable speed DC drives, program logic control (“PLC”) based automation systems, human machine interface (“HMI”) and specialty panels. The products, built for application voltages from 480 volts to 38,000 volts, are used in a wide variety of industries. Services provided by TP&S include electrical equipment retrofits, upgrades, startups, testing and troubleshooting of substations, switchgear, drives and control systems.

The E&I segment provides a full range of electrical and instrumentation construction and installation services to both land and marine based markets of the oil and gas industry, the water and wastewater facilities industry and other commercial and industrial markets. The E&I segment provides services on both a fixed-price and a time-and-materials basis. The segment’s services include electrical and instrumentation turnarounds, maintenance, renovation and new construction. Applications include installation of switchgear, AC and DC motors, drives, motor controls, lighting systems and high voltage cable. Marine based oil and gas services include complete electrical system rig-ups, modifications, start-ups and testing for vessels, drilling rigs, and production modules. These services can be manufactured and installed utilizing NEMA (“National Electrical Manufacturers Association”) and ANSI (“American National Standards Institute”) or IEC (“International Electrotechnical Commission”) equipment to meet ABS (“American Bureau of Shipping”), USCG (“United States Coast Guard”), Lloyd’s Register, a provider of marine certification services, and DNV (a leading certification body/registrar for management systems certification services) standards.

The AAT segment manufacturers and markets zone cabling enclosures and manufacturers formed metals products. The zone cabling product line develops and manufactures patented “zone cabling” and wireless telecommunication enclosures. These enclosures mount in ceilings, walls, raised floors, and certain modular furniture to facilitate the routing of telecommunications network cabling, fiber optics and wireless solutions to the workspace environment. AAT also operates a precision sheet metal fabrication and assembly operation and provides services such as precision “CNC” (“Computer Numerical Controlled”) stamping, bending, assembling, painting, powder coating and silk screening to a diverse client base including, but not limited to, engineering, technology and electronics companies, primarily in the Southeast.

F-7

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

M&I’s wholly-owned subsidiary, South Coast Electric Systems, LLC, is a Mississippi based Limited Liability Company organized on February 20, 2003. With the exception of electrical contracting, it is engaged in the same lines of business as M&I, but it participates in different market segments.

M&I has minority interests in M&I Electric Far East PTE Ltd. (“MIEFE”) and BOMAY Electrical Industries Company, Ltd. (“BOMAY”). MIEFE is a Singapore company that provides sales, manufacturing and technical support internationally. BOMAY provides electrical systems primarily for land and marine based drilling rigs in China. These ventures are accounted for using the equity method of accounting.

(2)    Summary of Significant Accounting Policies

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of American Electric Technologies, Inc. and its wholly owned subsidiary, M&I. Significant inter-company accounts and transactions are eliminated in consolidation.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. The most significant estimates made by management include:

Reclassification

Certain items are reclassified in the 2007 consolidated financial statements to conform to the 2008 presentation.

Financial Instruments

The Company includes fair value information in the notes to financial statements when the fair value of its financial instruments is different from the book value. When the book value approximates fair value, no additional disclosure is made, which is the case for financial instruments outstanding as of December 31, 2008 and 2007. The Company assumes the book value of those financial instruments that are classified as current approximates fair value because of the short maturity of these instruments. For non-current financial instruments, the Company uses quoted market prices or, to the extent that there are no available quoted market prices, market prices for similar instruments.

Cash and Cash Equivalents

Cash equivalents consist of liquid investments with original maturities of three months or less. Cash equivalents are stated at cost, which approximates market value. The Company maintains cash in bank accounts that, at times, exceed federally insured limits. The Company closely monitors the financial condition of these banks and has not experienced a loss associated with its accounts.

F-8

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

Accounts Receivable and Provision for Bad Debts

The Company maintains an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. The estimate is based on management’s assessment of the collectibility of specific customer accounts and includes consideration for credit worthiness and financial condition of those specific customers. We also will review historical experience with the customer, the general economic environment and the aging of our receivables. We record an allowance to reduce receivables to the amount that we reasonably believe to be collectible. Based on our historical collection experience, we currently feel our allowance for doubtful accounts is adequate.

Inventories

Inventories are stated at the lower of cost or market, with material value determined using an average cost method. Inventory costs for finished goods and work-in-process include direct material, direct labor, production overhead and outside services. TP&S and E&I indirect overhead is apportioned to work in process based on direct labor incurred. AAT production overhead, including indirect labor, is allocated to finished goods and work-in-process based on material consumption.

Property, Plant and Equipment

Property, plant and equipment is stated at cost. Expenditures for repairs and maintenance are expensed as incurred while renewals and betterments are capitalized. Depreciation is calculated on the straight-line basis over the estimated useful lives of the assets after giving effect to salvage values.

Management reviews property and equipment for the possible impairment of long-lived assets, whenever events or circumstances indicate the carrying amount of an asset may not be recoverable. If the estimated future cash flows are projected to be less than the carrying amount, an impairment write-down (representing the carrying amount of the long-lived asset which exceeds the present value of estimated expected future cash flows) would be recorded as a period expense. As of December 31, 2008, there were no impairments.

Other Assets

Amortization expense related to patents held by the Company for the years ended December 31, 2008 and 2007 was approximately $5,200 and $5,000, respectively. Estimated amortization expense for the next five years is as follows:

F-9

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

Federal Income Taxes

Income taxes are accounted for by applying the liability method. Under this method, deferred tax assets and liabilities are determined based on differences between financial reporting and tax bases of assets and liabilities and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to be reported to the taxing authorities. Deferred tax assets are evaluated annually and a valuation allowance is provided if it is more likely than not that, the deferred tax assets will not give rise to future benefits in the Company’s tax returns.

In July 2006, the Financial Accounting Standards Board (“FASB”) issued Interpretation No. 48, Accounting for Uncertainty in Income Taxes (“FIN 48”). FIN 48 clarifies the accounting for uncertainty in income taxes recognized in the Company’s financial statements in accordance with FASB Statement No. 109, Accounting for Income Taxes. FIN 48 also prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return and provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure and transition. The provisions of FIN 48 are to be applied to all material tax positions upon initial adoption of this standard. Only tax positions that meet the “more likely than not” recognition threshold at the effective date may be recognized or continue to be recognized upon adoption of FIN 48. FIN 48 is effective for our fiscal year beginning January 1, 2007. The Company has reviewed its tax positions and determined that adoption of FIN 48 did not have a material impact on its financial position or results of operations.

Foreign Currency Gains and Losses

Foreign currency translations are included as a separate component of comprehensive income. We have determined the local currency of our foreign joint ventures to be the functional currency. In accordance with SFAS No. 52, Foreign Currency Translation, the assets and liabilities of our foreign equity investees, denominated in foreign currency, are translated into U.S. dollars at exchange rates in effect at the consolidated balance sheet date; revenues and expenses are translated at the average exchange rate for the period. Related translation adjustments are reported as comprehensive income, which is a separate component of stockholders’ equity, whereas gains and losses resulting from foreign currency transactions are included in results of operations.

Revenue Recognition

The Company reports earnings from firm-price and modified firm price long-term contracts on the percentage-of-completion method. Earnings are recorded based on the ratio of costs incurred to total estimated costs. In 2006, the Company determined that labor incurred provides an improved measure of percentage of completion for its Technical Products segment. This change in the application of an accounting principle, did not have a material cumulative impact on the Company’s financial position or operating results. Costs include direct material, direct labor, and job related overhead. Losses expected to be incurred on contracts are charged to operations in the period such losses are determined. A contract is considered complete when all costs except insignificant items have been incurred and the customer has accepted the product or project. Revenue from non-time and material jobs that will be completed within approximately one month are recognized on the completed-contract method. This method is used because these contracts are typically completed in a short period and the financial position and results of operations do not vary materially from those that would result from use of the percentage-of-completion method.

The Company records revenue from its field and technical service and repair operations on a completed service basis after customer acknowledgement that the service has been completed and accepted. Approximately 14% of the Company’s consolidated revenues are recorded on this basis. In addition, the Company sells certain

F-10

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

purchased parts and products. These revenues are recorded when the product is shipped and title passes to the customer. Less than 1% of the Company’s consolidated revenues are recorded on this basis. Revenue associated with the American Access segment is generally recognized when manufactured products are shipped and right of ownership passes.

The asset, “Work-in-process,” which is included in inventories, represents the cost of labor, material, and overhead in excess of amounts billed on jobs accounted for under the completed-contract method. For contracts accounted for under the percentage-of-completion method, the asset, “Costs and estimated earnings in excess of billing on uncompleted contracts,” represents revenue recognized in excess of amounts billed and the liability, “Billings in excess of costs and estimated earnings on uncompleted contracts,” represents billings in excess of revenue recognized.

Contract revenue recognition inherently involves estimation, including the contemplated level of effort to accomplish the tasks under the contract, the cost of the effort, and an ongoing assessment of progress toward completing the contract. From time to time, as part of the normal management processes, facts develop that require revisions to estimated total costs or revenues expected. The cumulative impact of any revisions to estimates and the full impact of anticipated losses on contracts accounted for under SOP 81-1 are recognized in the period in which they become known. Projected losses on all other contracts are recognized as the services and materials are provided.

Shipping and Handling Fees and Costs

Shipping and handling fees, if billed to customers, are included in net sales. Shipping and handling costs associated with inbound freight are expensed as incurred. Shipping and handling costs associated with outbound freight are classified as cost of sales.

Concentration of Market Risk and Geographic Operations

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of trade accounts receivable. The Company’s market risk is dependent primarily on the strength of the oil and gas and energy related industries. The Company grants credit to customers and generally does not require security except in the case of certain international contracts. Procedures are in effect to monitor the credit worthiness of its customers. During 2008 and 2007, no single customer represented 10% or more of Company revenue.

The Company sells its products and services in domestic and international markets; however, significant portions of the Company’s sales are concentrated with customers located in the Gulf Coast. The Gulf Coast region accounts for approximately 60% and 76% of the Company’s revenue during the years ended December 31, 2008 and 2007, respectively.

Recently Issued Accounting Pronouncements

In September 2006, the FASB issued SFAS 157, “Fair Value Measurements,” to increase consistency and comparability in fair value measurements by defining fair value, establishing a framework for measuring fair value in generally accepted accounting principles, and expanding disclosures about fair value measurements. SFAS 157 emphasizes that fair value is a market-based measurement, not an entity-specific measurement. It clarifies the extent to which fair value is used to measure recognized assets and liabilities, the inputs used to develop the measurements, and the effect of certain measurements on earnings for the period. SFAS 157 is effective for financial statements issued for fiscal years beginning after November 15, 2007, and is applied on a prospective basis. On February 12, 2008, the FASB issued FASB Staff Position (FSP) FAS157-2 to allow a

F-11

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

one-year deferral of adoption of SFAS 157 for non-financial assets and non-financial liabilities that are recognized at fair value on a nonrecurring basis. The FASB also issued FSP FAS157-1, which amends SFAS 157 to exclude SFAS 13, “Accounting for Leases,” and its related interpretive accounting pronouncements. The Company does not believe adoption of this standard will have an impact on our financial position or results of operations.

In February 2007, the FASB issued SFAS 159, “The Fair Value Option for Financial Assets and Financial Liabilities,” which is an irrevocable election to measure eligible financial instruments and certain other assets and liabilities at fair value on an instrument-by-instrument basis. The election may only be applied at specified election dates and to instruments in their entirety rather than to portions of instruments. Upon initial election, the entity reports the difference between the instruments’ carrying value and their fair value as a cumulative-effect adjustment to the opening balance of retained earnings. At each subsequent reporting date, an entity reports in earnings, unrealized gains and losses on items for which the fair value option has been elected. SFAS 159 is effective for financial statements issued for fiscal years beginning after November 15, 2007, and is applied on a prospective basis. Early adoption of SFAS 159 is permitted provided the entity also elects to adopt the provisions of SFAS 157 as of the early adoption date selected for SFAS 159. The Company has elected not to adopt the provisions of SFAS 159 at this time because it would not have a material impact on its financial statements.

In June 2007, the FASB ratified EITF 06-11 Accounting for the Income Tax Benefits of Dividends on Share-Based Payment Awards. See discussion of Income Taxes above.

In December 2007, the FASB issued a revision and replacement of SFAS 141(“SFAS 141R”), “Business Combinations,” to increase the relevance, representational faithfulness, and comparability of the information a reporting entity provides in its financial reports about a business combination and its effects. SFAS 141R replaces SFAS 141, “Business Combinations” but, retains the fundamental requirements of SFAS 141 that the acquisition method of accounting be used and an acquirer be identified for all business combinations. SFAS 141R expands the definition of a business and of a business combination and establishes how the acquirer is to: (1) recognize and measure in its financial statements the identifiable assets acquired, the liabilities assumed, and any noncontrolling interest in the acquiree; (2) recognize and measure the goodwill acquired in the business combination or a gain from a bargain purchase; and (3) determine what information to disclose to enable users of the financial statements to evaluate the nature and financial effects of the business combination. SFAS 141R is applicable to business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2008, and is to be applied prospectively. Early adoption is prohibited. SFAS 141R will impact the Company only if it elects to enter into a business combination subsequent to December 31, 2008.

In December 2007, the FASB issued SFAS 160, “Noncontrolling Interests in Consolidated Financial Statements – an amendment of ARB No. 51,” to improve the relevance, comparability, and transparency of the financial information a reporting entity provides in its consolidated financial statements. SFAS 160 amends ARB 51 to establish accounting and reporting standards for noncontrolling interests in subsidiaries and to make certain consolidation procedures consistent with the requirements of SFAS 141R. It defines a noncontrolling interest in a subsidiary as an ownership interest in the consolidated entity that should be reported as equity in the consolidated financial statements. SFAS 160 changes the way the consolidated income statement is presented by requiring consolidated net income to include amounts attributable to the parent and the noncontrolling interest. SFAS 160 establishes a single method of accounting for changes in a parent’s ownership interest in a subsidiary which does not result in deconsolidation. SFAS 160 also requires expanded disclosures that clearly identify and distinguish between the interests of the parent and the interests of the noncontrolling owners of a subsidiary. SFAS 160 is effective for financial statements issued for fiscal years beginning on or after December 15, 2008, and interim

F-12

Table of Contents

American Electric Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

periods within those fiscal years. Early adoption is prohibited. SFAS 160 shall be applied prospectively, with the exception of the presentation and disclosure requirements which shall be applied retrospectively for all periods presented. The Company does not believe that the adoption of SFAS 160 would have a material effect on its consolidated financial position, results of operations or cash flows.

In March 2008, the FASB issued SFAS 161, “Disclosures about Derivative Instruments and Hedging Activities—an amendment of FASB Statement No. 133,” to enhance the current disclosures about how and why an entity uses derivative instruments, how derivative instruments and related hedged items are accounted for under Statement 133 and its related interpretations, and how derivative instruments and related hedge items affect an entity’s financial position, financial performance, and cash flows. SFAS 161 is effective for financial statements issued for fiscal years beginning on or after November 15, 2008, and interim periods within those fiscal years. Early adoption is encouraged. The Company does not believe that the adoption of SFAS 161 would have a material effect on its consolidated financial position, results of operations or cash flows.

(3)    Inventories

Inventories consisted of the following at December 31, 2008 and 2007:

(4)    Marketable Securities

During 2007, the Company sold its investment in marketable securities. Cash proceeds from the sale were $1,169,565, resulting in a realized gain of $1,035,062. As of December 31, 2008 and 2007 the Company did not own any marketable securities.

(5)    Costs, Estimated Earnings, and Related Billings on Uncompleted Contracts

Contracts in progress at December 31, 2008, and 2007 consisted of the following: