STANDARD MOTOR PRODUCTS, INC. - Annual Report: 2020 (Form 10-K)

---

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2020

or

For the transaction period from ____ to ____

Commission file number:  001-04743

(Exact name of registrant as specified in its charter)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes ☑  No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐  No  ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑          No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes ☑      No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company.  See definition of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.      ☑

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes  ☐   No  ☑

The aggregate market value of the voting common stock based on the closing price on the New York Stock Exchange on June 30, 2020 (the last business day of registrant’s most recently completed second fiscal quarter) of $41.20 per share held by non-affiliates of the registrant was $825,914,811.  For purposes of the foregoing calculation only, all directors and officers have been deemed to be affiliates, but the registrant disclaims that any of such are affiliates.

As of February 22, 2021, there were 22,357,438 outstanding shares of the registrant’s common stock, par value $2.00 per share.

DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III of this Report is incorporated herein by reference from the registrant’s definitive proxy statement relating to its annual meeting of stockholders to be held on May 21, 2021.

STANDARD MOTOR PRODUCTS, INC.

INDEX

PART I

In this Annual Report on Form 10-K, “Standard Motor Products,” “we,” “us,” “our” and the “Company” refer to Standard Motor Products, Inc. and its subsidiaries, unless the context requires otherwise. This Report, including the documents incorporated herein by reference, contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934.  Forward-looking statements in this Report are indicated by words such as “anticipates,” “expects,” “believes,” “intends,” “plans,” “estimates,” “projects,” “strategies” and similar expressions. These statements represent our expectations based on current information and assumptions and are inherently subject to risks and uncertainties.  Our actual results could differ materially from those which are anticipated or projected as a result of certain risks and uncertainties, including, but not limited to, changes or loss in business relationships with our major customers and in the timing, size and continuation of our customers’ programs; changes in our supply chain financing arrangements, such as changes in terms, termination of contracts and/or the impact of rising interest rates; the ability of our customers to achieve their projected sales; competitive product and pricing pressures; increases in production or material costs, including procurement costs resulting from higher tariffs, that cannot be recouped in product pricing; the performance of the aftermarket, heavy duty, industrial equipment and original equipment markets; changes in the product mix and distribution channel mix; economic and market conditions; successful integration of acquired businesses; our ability to achieve benefits from our cost savings initiatives; product liability and environmental matters (including, without limitation, those related to asbestos-related contingent liabilities and remediation costs at certain properties); the effects of widespread public health crisis, including the novel coronavirus (COVID-19) pandemic; as well as other risks and uncertainties, such as those described under Risk Factors, Quantitative and Qualitative Disclosures About Market Risk and those detailed herein and from time to time in the filings of the Company with the SEC. Forward-looking statements are made only as of the date hereof, and the Company undertakes no obligation to update or revise the forward-looking statements, whether as a result of new information, future events or otherwise. In addition, historical information should not be considered as an indicator of future performance.

Overview

We are a leading independent manufacturer and distributor of premium replacement parts for the engine management and temperature control systems of motor vehicles in the automotive aftermarket industry with a complementary focus on the heavy duty, industrial equipment and original equipment markets.

We are organized into two operating segments.  Each segment focuses on providing our customers with full-line coverage of its products, and a full suite of complementary services that are tailored to our customers’ business needs and driving end-user demand for our products.  We sell our products primarily to automotive aftermarket retailers, program distribution groups, warehouse distributors, original equipment manufacturers and original equipment service part operations in the United States, Canada, Europe, Asia, Mexico and other Latin American countries.

The Automotive Aftermarket

The automotive aftermarket replacement parts business differs substantially from the original equipment manufacturers (“OEM”) parts business.  Unlike the OEM parts business that primarily follows trends in new car production, the automotive aftermarket replacement parts business primarily tends to follow different trends, such as:

The automotive aftermarket industry is comprised of a large number of diverse manufacturers varying in product specialization and size.  In addition to manufacturing, aftermarket companies must allocate resources towards an efficient distribution process in order to maintain the flexibility and responsiveness on which their customers depend.  Aftermarket manufacturers must be efficient producers of small lot sizes, and must distribute, with rapid turnaround times, products for nearly all domestic and import vehicles on the road today.

Our Business Strategy

Our mission is to be the best full-line, full-service supplier of premium engine management and temperature control products.

The key elements of our strategy are as follows:

To maintain our strong competitive position, we remain committed to the following:

Our Products & Services

Our Engine Management Segment manufactures and distributes a full line of critical components for all years, makes and models of vehicles on the road, including new technologies. Key product categories within our engine management portfolio include: (i) ignition, such as electronic ignition control modules, camshaft and crankshaft position sensors, distributor caps, rotors, ignition wires and coils; (ii) electrical, such as switches and relays; (iii) emissions, such as EGR valves and variable valve timing (VVT) components; (iv) fuel, such as mass airflow sensors, fuel pressure sensors, electronic throttle bodies and fuel injectors, including diesel injectors and pumps (new and remanufactured); and (v) safety-related systems, such as various sensors including anti-lock brake (ABS), vehicle speed, tire pressure monitoring (TPMS) and park assist.

We continuously look to expand our product offering.  Recently, we have done so by adding late-model coverage for existing product categories, and new product categories in response to new and evolving vehicle technologies, including diesel injectors, pumps and components, turbochargers, evaporation emission control system components, exhaust gas temperature sensors, active grill shutters, battery current sensors, and Advanced Driver Assistance Systems (ADAS) components, including blind spot detection sensors, cruise control distance sensors, lane departure sensor cameras and park assist backup cameras.

Ignition, Emission Control, Fuel & Safety Related System Products.  Replacement parts for ignition, emission, fuel and safety related systems accounted for approximately $691.7 million, or 61%, of our consolidated net sales in 2020, approximately $706 million, or 62%, of our consolidated net sales in 2019, and approximately $648.3 million, or 59%, of our consolidated net sales in 2018.

As the use and complexity of vehicle systems continue to develop and proliferate, we expect to identify and benefit from new sales opportunities. All new vehicles are factory‑equipped with numerous electronic control modules designed to monitor and control the internal combustion process and the emissions, transmission, safety and comfort systems of the vehicle.  Newer automotive systems include Advanced Driver Assistance Systems and Collision Avoidance Systems to alert the driver to potential problems, or to avoid collisions by implementing safeguards. Many of these systems use on-board computers to monitor inputs from sensing devices located throughout the vehicle.  Our sales of sensors, switches, actuators, valves, solenoids and related parts have increased as automobile manufacturers continue to equip their cars with these more complex engine management systems.

New sales opportunities have also arisen in the United States as a result of government regulations regarding safety and emissions.  Legally, automobiles must now comply with emissions standards from the time they were manufactured and, in most states, until the last day they are in use.  Emissions laws and fuel economy regulations have had a positive impact on sales of our ignition, emissions control and fuel delivery parts since vehicles failing these laws may require repairs utilizing parts sold by us. Similarly, as government-mandated safety devices, such as anti-lock braking systems and air bags mature, requiring servicing and repair, we anticipate increased sales opportunities for many of our products such as ABS sensors, TPMS sensors and traction control products.

Wire & Cable Products.  Wire and cable parts accounted for approximately $144 million, or 13%, of our consolidated net sales in 2020, approximately $143.2 million, or 13%, of our consolidated net sales in 2019, and approximately $155.2 million, or 14%, of our consolidated net sales in 2018.  These products include ignition (spark plug) wire sets, battery cables, pigtails, sockets and a wide range of electrical wire, terminals, connectors and tools for servicing an automobile’s electrical system.

Our Temperature Control Segment manufactures and distributes a full line of critical components for the temperature control (air conditioning and heating) systems, engine cooling systems, power window accessories and windshield washer systems of motor vehicles.  Key product categories within our temperature control portfolio include: air conditioning compressors (new and remanufactured), air conditioning repair kits, clutch assemblies, blower and radiator fan motors (brushless and brushed), filter dryers, evaporators, accumulators, hose assemblies, thermal expansion devices, heater valves, heater cores, A/C service tools and chemicals, fan assemblies, fan clutches, oil coolers, window lift motors, window regulators and assemblies, and windshield washer pumps.

We continuously look to improve our cost position through strategic transactions with manufacturers in low cost regions.  In 2014, we formed Foshan GWOYNG SMP Vehicle Climate Control & Cooling Products Co. Ltd., a China-based joint venture that manufactures automotive air conditioning accumulators, filter driers, hose assemblies, and switches; in 2017, we formed Foshan FGD SMP Automotive Compressor Co., Ltd., a China-based joint venture that manufactures automotive belt driven air conditioning compressors; and in 2019, we acquired an approximate 29% minority interest in Foshan Che Yijia New Energy Technology Co., Ltd., a China-based manufacturer of automotive electric air conditioning compressors.  We believe that these transactions will enhance our position as a basic low-cost manufacturer and a leading supplier of temperature control parts to the aftermarket and allow an opportunity for growth in the China market, while providing key complimentary manufacturing capabilities and synergy opportunities with our other manufacturing facilities.

Compressors.  Compressors accounted for approximately $163.1 million, or 14%, of our consolidated net sales in 2020, approximately $160.5 million, or 14%, of our consolidated net sales in 2019, and approximately $148.4 million, or 14%, of our consolidated net sales in 2018.

Other Climate Control Parts.  Other climate control parts accounted for approximately $118.9 million, or 11%, of our consolidated net sales in 2020, approximately $117.9 million, or 10%, of our consolidated net sales in 2019, and approximately $130 million, or 12%, of our consolidated net sales in 2018.

For additional information related to our operating segments, and the disaggregation of operating segment net sales by geographic area, major product group and major sales channel, see Note 19 “Industry Segment and Geographic Data” and Note 20 “Net Sales”, respectively, of the Notes to Consolidated Financial Statements in Item 8 of this Report.

Our Brands

We believe that our brands are an important component of our value proposition, and serve to distinguish our premium engine management and temperature control products from those of our competitors.  We market and distribute our products under our own brands, such as:

We also distribute our products to customers for resale under private labels and the following co-labels:

We have also developed our product offering and brand strategies to support our customers’ initiatives to market a tiered product assortment designed to satisfy end-user preferences for quality and value.  We believe that this alignment makes us an invaluable business partner to our customers.

Our Customers

We sell our products primarily to:

Our five largest individual customers accounted for approximately 68% of our consolidated net sales in 2020, approximately 69% of our consolidated net sales in 2019 and approximately 70% of our consolidated net sales in 2018.  During 2020, O’Reilly, NAPA, Advance and AutoZone accounted for 26%, 15%, 14% and 11% of our consolidated net sales, respectively.  Net sales from each of these customers were reported in both our Engine Management and Temperature Control Segments. The loss of one or more of these customers or, a significant reduction in purchases of our products from any one of them, could have a materially adverse impact on our business, financial condition and results of operations.

In December 2020, a large retail customer informed us of its decision to pursue a private brand strategy for its engine management product line.  This customer has historically purchased $140 million of engine management products annually from us.  We anticipate that sales to this customer will continue through the first quarter of 2021.  In light of this development, we plan to take the necessary steps to reduce costs.

Competition

We compete primarily on the basis of product quality, product availability, value-added services, product coverage, order turn‑around time, order fill rate, technical support and price.  We believe we differentiate ourselves from our competitors primarily through:

We are one of the leading independent manufacturers and distributors serving North America and other geographic areas in our core businesses of Engine Management and Temperature Control.  In the Engine Management Segment, we compete with: ACDelco, Aptive Plc, Denso Corporation, Continental AG, Hitachi, Ltd., Motorcraft, Robert Bosch GmbH, Visteon Corporation, NGK Spark Plug Co., Ltd., Dorman Products, Inc. and several privately-owned companies primarily importing products from Asia.  In the Temperature Control Segment, we compete with: ACDelco, MAHLE GmbH, Denso Corporation, Motorcraft, Sanden International (U.S.A.), Inc., Continental AG, Dorman Products, Inc., and several privately-owned companies.

The automotive aftermarket is highly competitive, and we face substantial competition in all markets that we serve.  Our success in the marketplace depends on our ability to execute the key elements of our business strategy discussed above.  In addition, we face competition from automobile manufacturers who supply many of the replacement parts sold by us, although these manufacturers generally supply parts only for cars they sell through OE dealerships.

Sales and Distribution

In the aftermarket channel, we sell our products to warehouse distributors and retailers.  Our customers buy directly from us and sell directly to jobber stores, professional technicians and to “do-it-yourselfers” who perform automotive repairs on their personal vehicles.  In recent years, warehouse distributors have consolidated with other distributors, and an increasing number of distributors own their jobber stores or sell down channel to professional technicians.  Retailers are also consolidating with other retailers and have begun to increase their efforts to sell to professional technicians adding additional competition in the “do-it-for-me,” or the professional technician segment of our industry.  As automotive parts and systems become more complex, “do-it-yourselfers” are less likely to service their own vehicles and may become more reliant on professional technicians.

In the original equipment channel we sell our products to manufacturers of automotive, heavy duty, and motorsport vehicles and equipment, and their tier suppliers.  We also sell and support the service part divisions of each of our customers. In addition to new car sales, automotive dealerships sell parts and service vehicles.  We also sell our products to Tier 1 suppliers of OEMs.

In the heavy duty aftermarket, we sell our products to recognized distributors who buy directly from us and sell directly to fleet operators and repair facilities for use in the repair and maintenance of medium to heavy duty vehicles. We also sell our products to OEMs for use in production and service of medium to heavy duty vehicles as well as construction, agricultural and specialty vehicles and equipment.

We sell our products primarily in the United States, with additional sales in Canada, Europe, Asia, Mexico and other Latin American countries.  Our sales are substantially denominated in U.S. dollars.  For information on revenues and long-lived assets by geographic area, see Note 19 “Industry Segment and Geographic Data” of the Notes to Consolidated Financial Statements in Item 8 of this report.

Our customers have come to depend on our sales personnel as a reliable source for technical information and to assist with sales to their customers (e.g., jobber stores and professional technicians).  In this manner, we direct a significant portion of our sales efforts to our customers’ customers to generate demand for our products, and we believe that the structure of our sales force facilitates these efforts by enabling us to implement our sales and marketing programs uniformly throughout the distribution channel.

Another way we generate demand for our products is through our training program, which offers training seminars to professional automotive technicians.  Our training program is accredited by the National Institute for Automotive Service Excellence (ASE) Training Managers Council.  Our seminars are taught by ASE certified instructors and have historically featured in-person training seminars on more than 30 different topics and on-demand training webinars online on more than 150 different topics. As a result of the COVID-19 pandemic, we temporarily suspended in-person training seminars to protect the health and safety of our instructors and participating technicians, and we shifted our focus to offering live training webinars online. Through our training program, we teach approximately 60,000 technicians annually how to diagnose and repair vehicles equipped with complex systems related to our products, and we have approximately 16,000 technicians who are registered to participate in such sessions through our online platform.

We offer a variety of strategic customer discounts, allowances and incentives to increase customer purchases of our products.  For example, we offer cash discounts for paying invoices in accordance with the specified discounted terms of the invoice.  We also offer rebates and discounts to customers as advertising and sales force allowances, and allowances for warranty and overstock returns are also provided.  We believe these discounts, allowances and incentives are a common practice throughout the automotive aftermarket industry, and we intend to continue to offer them in response to competitive pressures and to strategically support the growth of all our products.

Seasonality

Historically, our operating results have fluctuated by quarter, with the greatest sales occurring in the second and third quarters of the year and revenues generally being recognized at the time of shipment.  It is in these quarters that demand for our products is typically the highest, specifically in the Temperature Control Segment of our business.  In addition to this seasonality, the demand for our temperature control products during the second and third quarters of the year may vary significantly with the summer weather and customer inventories.  Ordinarily, a warm summer, as we experienced in 2020, would increase the demand for our temperature control products, while a somewhat mild summer, as we experienced in 2019, may lessen such demand.  In 2020, however, due to the impact of the COVID-19 pandemic, we initially experienced a significant reduction in customer demand for our products in the second quarter, with customer demand strengthening in the last half of the quarter and continuing throughout the second half of the year.

Working Capital and Inventory Management

Automotive aftermarket companies have been under increasing pressure to provide broad SKU (stock keeping unit) coverage due to parts and brand proliferation.  In response to this, we have made, and continue to make, changes to our inventory management system designed to reduce inventory requirements.  We have a pack‑to‑order distribution system, which permits us to retain slow moving items in a bulk storage state until an order for a specific branded part is received.  This system reduces the volume of a given part in inventory.  We also expanded our inventory management system to improve inventory deployment, enhance our collaboration with customers on forecasts and inventory assortments, and further integrate our supply chain both to customers and suppliers.

We face inventory management issues as a result of overstock returns.  We permit our customers to return new, undamaged products to us within customer-specific limits (which are generally limited to a specified percentage of their annual purchases from us) in the event that they have overstocked their inventories.  In addition, the seasonality of our Temperature Control Segment requires that we increase our inventory during the winter season in preparation of the summer selling season and customers purchasing such inventory have the right to make returns.  We accrue for overstock returns as a percentage of sales after giving consideration to recent returns history.

Our profitability and working capital requirements are seasonal due to our sales mix of temperature control products.  Our working capital requirements typically peak near the end of the second quarter, as the inventory build‑up of air conditioning products is converted to sales and payments on the receivables associated with such sales have yet to be received.  These increased working capital requirements are funded by borrowings from our revolving credit facility.

Production and Engineering

An important component of our business strategy is to invest the resources necessary to expand our technical capabilities and bring more product manufacturing in-house. We engineer, tool and manufacture many of the products that we offer for sale and the components used in the assembly of those products, and we continue to evaluate opportunities to bring new product categories in-house.  For example, we perform our own plastic molding operations, stamping and machining operations, wire extrusion, automated electronics assembly and a wide variety of other processes.  In the case of remanufactured components, we conduct our own teardown, diagnostics and rebuilding for air conditioning compressors, diesel injectors, and diesel pumps.  We have found this level of vertical integration, in combination with our manufacturing footprint in low cost regions, provides advantages in terms of cost, quality and availability.

Suppliers

We source materials through a global network of suppliers to ensure a consistent, high quality and low cost supply of materials and key components for our product lines.  As a result of the breadth of our product offering, we are not dependent on any single raw material.

The principal raw materials purchased by us consist of brass, electronic components, fabricated copper (primarily in the form of magnet and insulated cable), steel magnets, laminations, tubes and shafts, stamped steel parts, copper wire, stainless steel coils and rods, aluminum coils, fittings, rods, cast aluminum parts, lead, steel roller bearings, rubber molding compound, thermo‑set and thermo plastic molding powders, and chemicals.  Additionally, we use components and cores (used parts) in our remanufacturing processes for air conditioning compressors, diesel injectors, diesel pumps, and turbo chargers.

In the case of cores for air conditioning compressors, diesel injectors, diesel pumps, and turbo chargers, we obtain them either from exchanges with customers who return cores subsequent to purchasing remanufactured parts or through direct purchases from a network of core brokers.  In addition, we acquire certain materials by purchasing products that are resold into the market, particularly by OEM sources and other domestic and foreign suppliers.

We believe there is an adequate supply of primary raw materials and cores; however, there can be no assurance over the long term that the availability of materials and components or increases in commodity prices will not materially affect our business or results of operations.

Environmental, Social and Governance (ESG) and Human Capital

Our Company was founded in 1919 on the values of integrity, common decency and respect for others.  These values continue to this day and are embodied in our Code of Ethics, which has been adopted by the Board of Directors of the Company to serve as a statement of principles to guide our decision-making and reinforce our commitment to these values in all aspects of our business.  We believe that our commitment to our Company, our employees and the communities within which we operate has led to high employee satisfaction and low employee turnover, and our commitment to our customers, suppliers and business partners has resulted in high customer satisfaction, as evidenced by the customer awards that we routinely win, and decades-long customer relationships.

We also take environmental and social issues seriously.  We believe that our commitment to identifying and implementing positive environmental and social related business practices strengthens our Company, improves our relationship with our shareholders and better serves our customers, our communities and the broader environment within which we conduct our business. To further our commitment to these values, in 2020, we formed a multi-disciplinary leadership team comprised of our Chief Executive Officer and other executive officers to lead our efforts in this area, and we launched the SMPCares^TM initiative to put our philanthropic plans into practice.

As a company we take our commitment to environmental stewardship seriously.  Our use of remanufactured cores in our air conditioning compressor, diesel injector and diesel pump product lines result in the reduction of raw materials and energy consumption.  Certain of our products, such as fuel injectors and electronic sensors reduce emissions and foster cleaner operating vehicles.  As related to our manufacturing operations, over the last 5 years, we have spent in excess of $1 million for the reduction of energy consumption in our facilities by installing energy efficient lighting and climate control equipment.  We have made efforts to reduce our waste through a reduction in packaging materials and a reduction in our usage of cardboard, paper and plastics in our manufacturing processes.

We believe that our commitment to our employees is critical to our continued success, and has led to high employee satisfaction and low employee turnover.  To facilitate talent attraction and retention, we strive to have a diverse, inclusive and safe workplace, with opportunities for our employees to grow and develop in their careers, supported by strong compensation, benefits and health and wellness programs, and by programs that build connections between our employees and their communities.  Our employees share our corporate values of integrity, common decency and respect of others, values which have been established since our company was founded.

As of December 31, 2020, we employed approximately 4,300 people, with 1,800 people in the United States and 2,500 people in Mexico, Canada, Poland, the U.K., Hong Kong and Taiwan.  Of the 4,300 people employed, approximately 2,400 people are production employees.  We operate primarily in non‑union facilities and have binding labor agreements with employees at other unionized facilities.  We have approximately 77 production employees in Edwardsville, Kansas who are covered by a contract with The International Union, United Automobile, Aerospace and Agricultural Implement Workers of America (“UAW”) that expires in August 2022.  We also have approximately 1,400 employees in Mexico who are covered under union agreements negotiated at various intervals. For clarification, the employee numbers described above exclude the employees of our joint venture operations.

We believe that our facilities are in labor markets with ready access to adequate numbers of skilled and unskilled workers, and we believe our relations with our union and non‑union employees are good.

Diversity and Inclusion.  We believe that a diverse workforce is critical to our success, and we continue to focus on the hiring, retention and advancement of women and underrepresented populations. Our recent efforts have been focused in three areas: inspiring innovation through an inclusive and diverse culture; expanding our efforts to recruit and hire world-class diverse talent; and identifying strategic partners to accelerate our inclusion and diversity programs.  Over the last 5 years, approximately 50% of our hires and promotions have been women or individuals of diverse backgrounds.

To further our commitment to diversity, we have established a “Diversity and Inclusion Taskforce.” The Task Force will consist of a Project Manager, Steering Committee, Executive Sponsors and Senior Council.  The Taskforce will be responsible for creating a diversity and inclusion strategy by establishing goals, tracking and mentoring high potential diverse employees, and enhancing our current practice of tracking diversity hires and promotions.

Health, Safety and Wellness. The success of our business is fundamentally connected to the well-being of our people. Accordingly, we are committed to the health, safety and wellness of our employees. We provide our employees and their families with access to a variety of innovative, flexible and convenient health and wellness programs, including benefits that provide protection and security so they can have peace of mind concerning events that may require time away from work, or that impact their financial well-being; that support their physical and mental health by providing tools and resources to help them improve or maintain their health status and encourage engagement in healthy behaviors; and that offer choice where possible so they can customize their benefits to meet their needs and the needs of their families.

In response to the COVID-19 pandemic, we implemented significant changes that we determined were in the best interest of our employees and which comply with government regulations.  These include providing employees with flexible working arrangements, including, where appropriate, the ability to work from home, and implementing a number of safety policies and practices at all of our facilities.  For additional information on safety protocols implemented at our facilities, refer to the paragraph entitled, “Impact of the Novel Coronavirus (COVID-19),” in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of this report.

Compensation and Benefits.  We provide competitive compensation and benefits programs that meet the needs of our employees.  In addition to wages and salaries, these programs include annual cash bonuses, stock awards, a 401(k) Plan, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, family care resources, and employee assistance programs.

Talent Development.  We invest significant resources to develop the talent of our high potential employees.  We deliver numerous training opportunities, provide rotational assignment opportunities, have expanded our focus on continuous learning and development, and implemented methodologies to manage performance, provide feedback and develop talent.

Our talent development programs are designed to provide employees with the resources they need to help achieve their career goals, build management skills and lead their organizations. We provide a series of employee workshops that support professional growth and development. Our annual review process encourages manager and employee conversations throughout the year to enhance growth and development.

We believe that building connections between our employees, their families and our communities creates a more meaningful, fulfilling and enjoyable workplace. Through our “SMP Cares” initiative, our employees are encouraged to pursue their interests, and to connect to local communities through volunteering and giving opportunities.

Our corporate giving and volunteering programs, along with our practice of “Company Matching,” encourages our employees to donate, and to engage in those local causes that they are most passionate about.  Our employees have volunteered locally in projects such as the park beautification project in Long Island City, and have donated to such causes as the March of Dimes, United Way and Salvation Army.  We have successfully raised money for flood victims in Mexico and Puerto Rico, and are active in assisting many communities that have been devastated by natural disasters.  In response to the COVID-19 pandemic, our employees have donated in excess of $100,000 to local hospitals, schools and shelters, and have participated in numerous coat and clothing drives.  We continue to encourage participation in these initiatives as we believe they are essential in the support of our core values.

Available Information

We are a New York corporation founded in 1919.  Our principal executive offices are located at 37‑18 Northern Boulevard, Long Island City, New York 11101, and our main telephone number at that location is (718) 392‑0200.  Our Internet address is www.smpcorp.com.  We provide a link to reports that we have filed with the SEC.  However, for those persons that make a request in writing or by e-mail (financial@smpcorp.com), we will provide free of charge our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934.  These reports and other information are also available, free of charge, at www.sec.gov.

You should carefully consider the risks described below.  These risks and uncertainties are not the only ones we face.  Additional risks and uncertainties not presently known to us or other factors not perceived by us to present significant risks to our business at this time also may impair our business and results of operations.  If any of the stated risks actually occur, they could materially and adversely affect our business, financial condition or operating results.

Risks Related to Our Operations

We depend on a limited number of key customers, and the loss of any such customer, or a significant reduction in purchases by such customer, could have a material adverse effect on our business, financial condition and results of operations.

Our five largest individual customers accounted for approximately 68% of our consolidated net sales in 2020, approximately 69% of our consolidated net sales in 2019, and approximately 70% of our consolidated net sales in 2018.  During 2020, O’Reilly, NAPA, Advance and AutoZone accounted for 26%, 15%, 14% and 11% of our consolidated net sales, respectively. The loss of one or more of these customers or, a significant reduction in purchases of our products from any one of them, could have a materially adverse impact on our business, financial condition and results of operations. In addition, any consolidation among our key customers may further increase our customer concentration risk.

In December 2020, a large retail customer informed us of its decision to pursue a private brand strategy for its engine management product line.  This customer has historically purchased $140 million of engine management products annually from us.  We anticipate that sales to this customer will continue through the first quarter of 2021.  In light of this development, we plan to take the necessary steps to reduce costs.

Also, we do not typically enter into long-term agreements with any of our customers.  Instead, we enter into a number of purchase order commitments with our customers, based on their current or projected needs.  We have in the past, and may in the future, lose customers or lose a particular product line of a customer due to the highly competitive conditions in the automotive aftermarket industry, including pricing pressures, consolidation of customers, customer initiatives to buy direct from foreign suppliers and/or to pursue a private brand strategy, or other business considerations.  A decision by any significant customer, whether motivated by competitive conditions, financial difficulties or otherwise, to materially decrease the amount of products purchased from us, to change their manner of doing business with us, or to stop doing business with us, including a decision to source products directly from a low cost region such as Asia, could have a material adverse effect on our business, financial condition and results of operations.

Because our sales are concentrated, and the market in which we operate is very competitive, we are under ongoing pressure from our customers to offer lower prices, extend payment terms, increase marketing allowances and other terms more favorable to these customers.  These customer demands have put continued pressure on our operating margins and profitability, resulted in periodic contract renegotiation to provide more favorable prices and terms to these customers, and significantly increased our working capital needs.

Our industry is highly competitive, and our success depends on our ability to compete with suppliers of automotive aftermarket products, some of which may have substantially greater financial, marketing and other resources than we do.

The automotive aftermarket industry is highly competitive, and our success depends on our ability to compete with domestic and international suppliers of automotive aftermarket products. In the Engine Management Segment, we compete with: ACDelco, Aptive Plc, Denso Corporation, Continental AG, Hitachi, Ltd., Motorcraft, Robert Bosch GmbH, Visteon Corporation, NGK Spark Plug Co., LTD., Dorman Products, Inc. and several privately-owned companies primarily importing products from Asia.   In the Temperature Control Segment, we compete with: ACDelco, MAHLE GmbH, Denso Corporation, Motorcraft, Sanden International (U.S.A.), Inc., Continental AG, Dorman Products, Inc., and several privately-owned companies.  In addition, automobile manufacturers supply many of the replacement parts we sell.

Some of our competitors may have larger customer bases and significantly greater financial, technical and marketing resources than we do.  These factors may allow our competitors to:

We cannot assure you that our competitors will not develop products or services that are equal or superior to our products or that achieve greater market acceptance than our products or that in the future other companies involved in the automotive aftermarket industry will not expand their operations into product lines produced and sold by us.  We also cannot assure you that additional entrants will not enter the automotive aftermarket industry or that companies in the aftermarket industry will not consolidate.  Any such competitive pressures could cause us to lose market share or could result in significant price decreases and could have a material adverse effect upon our business, financial condition and results of operations.

There is substantial price competition in our industry, and our success and profitability will depend on our ability to maintain a competitive cost and price structure.

There is substantial price competition in our industry, and our success and profitability will depend on our ability to maintain a competitive cost and price structure.  This is the result of a number of industry trends, including the impact of offshore suppliers in the marketplace (particularly in China) which do not have the same infrastructure costs as we do, the consolidated purchasing power of large customers, and actions taken by some of our competitors in an effort to ‘‘win over’’ new business.  We have in the past reduced prices to remain competitive and may have to do so again in the future.  Price reductions have impacted our sales and profit margins and are expected to do so in the future.  Our future profitability will depend in part upon our ability to respond to changes in product and distribution channel mix, to continue to improve our manufacturing efficiencies, to generate cost reductions, including reductions in the cost of components purchased from outside suppliers, and to maintain a cost structure that will enable us to offer competitive prices.  Our inability to maintain a competitive cost structure could have a material adverse effect on our business, financial condition and results of operations.

Our business is seasonal and is subject to substantial quarterly fluctuations, which impact our quarterly performance and working capital requirements.

Historically, our operating results have fluctuated by quarter, with the greatest sales occurring in the second and third quarters of the year and with revenues generally being recognized at the time of shipment.  It is in these quarters that demand for our products is typically the highest, specifically in the Temperature Control Segment of our business. In addition to this seasonality, the demand for our Temperature Control products during the second and third quarters of the year may vary significantly with the summer weather and customer inventories.  Ordinarily, a warm summer, as we experienced in 2020, would increase the demand for our temperature control products, while a somewhat mild summer, as we experienced in 2019, may lessen such demand.  As a result of this seasonality and variability in demand of our Temperature Control products, our working capital requirements peak near the end of the second quarter, as the inventory build-up of air conditioning products is converted to sales and payments on the receivables associated with such sales have yet to be received.  During this period, our working capital requirements are typically funded by borrowing from our revolving credit facility.

We may incur material losses and significant costs as a result of warranty-related returns by our customers in excess of anticipated amounts.

Our products are required to meet rigorous standards imposed by our customers and our industry. Many of our products carry a warranty ranging from a 90-day limited warranty to a lifetime limited warranty, which generally covers defects in materials or workmanship, failure to meet industry published specifications and/or the result of installation error. In the event that there are material deficiencies or defects in the design and manufacture of our products and/or installation error, the affected products may be subject to warranty returns and/or product recalls. Although we maintain a comprehensive quality control program, we cannot give any assurance that our products will not suffer from defects or other deficiencies or that we will not experience material warranty returns or product recalls in the future.

We accrue for warranty returns as a percentage of sales, after giving consideration to recent historical returns. While we believe that we make reasonable estimates for warranty returns in accordance with our revenue recognition policies, actual returns may differ from our estimates. We have in the past incurred, and may in the future incur, material losses and significant costs as a result of our customers returning products to us for warranty-related issues in excess of anticipated amounts. Deficiencies or defects in our products in the future may result in warranty returns and product recalls in excess of anticipated amounts and may have a material adverse effect on our business, financial condition and results of operations.

Our profitability may be materially adversely affected as a result of overstock inventory-related returns by our customers in excess of anticipated amounts.

We permit overstock returns of inventory that may be either new or non-defective or non-obsolete but that we believe we can re-sell. Customers are generally limited to returning overstocked inventory according to a specified percentage of their annual purchases from us. In addition, a customer’s annual allowance cannot be carried forward to the upcoming year.

We accrue for overstock returns as a percentage of sales, after giving consideration to recent historical returns. While we believe that we make reasonable estimates for overstock returns in accordance with our revenue recognition policies, actual returns may differ from our estimates. To the extent that overstocked returns are materially in excess of our projections, our business, financial condition and results of operations may be materially adversely affected.

We may be materially adversely affected by asbestos claims arising from products sold by our former brake business, as well as by other product liability claims.

In 1986, we acquired a brake business, which we subsequently sold in March 1998. When we originally acquired this brake business, we assumed future liabilities relating to any alleged exposure to asbestos-containing products manufactured by the seller of the acquired brake business. In accordance with the related purchase agreement, we agreed to assume the liabilities for all new claims filed after September 2001.  Our ultimate exposure will depend upon the number of claims filed against us on or after September 2001, and the amounts paid for settlements, awards of asbestos-related damages, and defense of such claims.  We do not have insurance coverage for the indemnity and defense costs associated with the claims we face.

At December 31, 2020, approximately 1,560 cases were outstanding for which we may be responsible for any related liabilities.  Since inception in September 2001 through December 31, 2020, the amounts paid for settled claims and awards of asbestos-related damages, including interest, were approximately $48.3 million.  A substantial increase in the number of new claims, or increased settlement payments, or awards of asbestos-related damages, could have a material adverse effect on our business, financial condition and results of operations.

In accordance with our policy to perform an annual actuarial evaluation in the third quarter of each year, and whenever events or changes in circumstances indicate that additional provisions may be necessary, an actuarial study was performed as of August 31, 2020.  Additionally, in December 2020, an updated actuarial study was performed to reflect events that occurred in the fourth quarter of 2020.  Based upon the results of the actuarial studies performed in 2020, we increased our asbestos liability to the low end of the range, and recorded an incremental pre-tax provision of $25.7 million in earnings (loss) from discontinued operations in the accompanying statement of operations.  The results of the updated study included an estimate of our undiscounted liability for settlement payments and awards of asbestos-related damages, excluding legal costs and any potential recovery from insurance carriers, ranging from $63 million to $99.1 million for the period through 2065.  Future legal costs, which are expensed as incurred and reported in earnings (loss) from discontinued operations in the accompanying statement of operations, are estimated, according to the updated study, to range from $48.7 million to $95.4 million.

Given the uncertainties associated with projecting asbestos-related matters into the future and other factors outside our control, we cannot give any assurance that significant increases in the number of claims filed against us will not occur, that awards of asbestos-related damages or settlement awards will not exceed the amount we have in reserve, or that additional provisions will not be required. Management will continue to monitor the circumstances surrounding these potential liabilities in determining whether additional reserves and provisions may be necessary. We plan on performing an annual actuarial analysis during the third quarter of each year for the foreseeable future, and whenever events or changes in circumstances indicate that additional provisions may be necessary.

In addition to asbestos-related claims, our product sales entail the risk of involvement in other product liability actions.  We maintain product liability insurance coverage, but we cannot give any assurance that current or future policy limits will be sufficient to cover all possible liabilities.  Further, we can give no assurance that adequate product liability insurance will continue to be available to us in the future or that such insurance may be maintained at a reasonable cost to us. In the event of a successful product liability claim against us, a lack or insufficiency of insurance coverage could have a material adverse effect on our business, financial condition and results of operations.

We may not be able to achieve the benefits that we expect from our cost savings initiatives.

We expect to realize cost savings as a result of various cost reduction measures implemented in response to the impact of the COVID-19 pandemic on our business and the loss of a large retail customer in the engine management product line, and several recently completed initiatives, including the plant rationalization programs implemented in February 2016 and January 2017.  Due to factors outside our control, such as the adoption or modification of domestic and foreign laws, regulations or policies, we may not be able to achieve the level of benefits that we expect to realize in these initiatives, or we may not be able to realize these benefits within the time frames we currently expect.  Our ability to achieve any anticipated cost savings could be affected by a number of factors such as changes in the amount, timing and character of charges related to such initiatives, or a substantial delay in the completion of such initiatives.  Failure to achieve the benefits of our cost saving initiatives could have a material adverse effect on us.  Our cost savings is also predicated upon maintaining our sales levels.

Severe weather, natural disasters and other disruptions could adversely impact our operations at our manufacturing and distribution facilities.

Severe weather conditions and natural disasters, such as hurricanes, floods and tornados, could damage our properties and effect our operations, particularly our major manufacturing and distribution operations at foreign facilities in Canada, Mexico and Poland, and at our domestic facilities in Florida, Indiana, Kansas, South Carolina, Texas, and Virginia. In addition, our business and operations could be materially adversely affected in the event of other serious disruptions at these facilities due to fire, electrical blackouts, power losses, telecommunications failures, terrorist attack or similar events.  Any of these occurrences could impair our ability to adequately manufacture or supply our customers due to all or a significant portion of our equipment or inventory being damaged. We may not be able to effectively shift the manufacture or delivery of products to our customers if one or more of our manufacturing or distribution facilities are significantly disrupted.

Our operations would be materially and adversely affected if we are unable to purchase raw materials, manufactured components or equipment from our suppliers.

Because we purchase various types of raw materials, finished goods, equipment, and component parts from suppliers as part of a global supply chain, we may be materially and adversely affected by the failure of those suppliers to perform as expected.  Supplier non-performance may consist of delivery delays or failures caused by production issues or delivery of non-conforming products.  Our suppliers’ ability to supply products to us is also subject to a number of risks, including the availability and cost of raw materials, the destruction of their facilities, or work stoppages, or other limitations on their business operations, which could be caused by any number of factors, such as labor disruptions, financial distress, severe weather conditions and natural disasters, social unrest, economic and political instability, and public health crises, including the occurrence of a contagious disease or illness, such as the COVID-19 pandemic, war, terrorism or other catastrophic events.  In addition, our failure to promptly pay, or order sufficient quantities of inventory from our suppliers may increase the cost of products we purchase or may lead to suppliers refusing to sell products to us at all.  Our efforts to protect against and to minimize these risks may not always be effective.

Our operations could be adversely affected by interruptions or breaches in the security of our computer and information technology systems.

We rely on information technology systems throughout our organization to conduct day-to-day business operations, including the management of our supply chain and our purchasing, receiving and distribution functions.  We also routinely use our information technology systems to send, receive, store, access and use sensitive data relating to our Company and its employees, customers, suppliers, and business partners, including intellectual property, proprietary business information, and other sensitive materials.  Additionally, we rely on our information technology systems to enable many of our employees to work remotely as a result of new policies and practices enacted by us in response to the COVID-19 pandemic.  Our information technology systems have been subject to cyber threats, including attempts to hack into our network and computer viruses.  Such hacking attempts and computer viruses have not significantly impacted or interrupted our business operations.  While we implement security measures designed to prevent and mitigate the risk of cyber attacks, our information technology systems, and the systems of our customers, suppliers and business partners, may continue to be vulnerable to computer viruses, attacks by hackers, or unauthorized access caused by employee error or malfeasance.  The exploitation of any such vulnerability could unexpectedly compromise our information security, or the security of our customers, suppliers and other business partners.  Furthermore, because the techniques used to carry out cyber attacks change frequently and in many instances are not recognized until after they are used against a target, we may be unable to anticipate these changes or implement adequate preventative measures.  If our information technology systems, or the systems of our customers, suppliers or business partners, are subject to cyber attacks, such as those involving significant or extensive system interruptions, sabotage, computer viruses or unauthorized access, we could experience disruptions to our business operations and incur substantial remediation costs, which could have a material adverse effect on our business, financial condition or results of operations.

Failure to maintain the value of our brands could have an adverse effect on our reputation, cause us to incur significant costs and negatively impact our business.

Our brands are an important component of our value proposition, and serve to distinguish our premium engine management and temperature control products from those of our competitors.  We believe that our success depends, in part, on maintaining and enhancing the value of our brands and executing our brand strategies, which are designed to drive end-user demand for our products and make us a valued business partner to our customers through the support of their marketing initiatives.  A decline in the reputation of our brands as a result of events, such as deficiencies or defects in the design or manufacture of our products, or from legal proceedings, product recalls or warranty claims resulting from such deficiencies or defects, may harm our reputation as a manufacturer and distributor of premium automotive parts, reduce demand for our products and adversely affect our business.

Risks Related to Liquidity

We are exposed to risks related to our receivables supply chain financing arrangements.

We are party to several supply chain financing arrangements, in which we may sell certain of our customers’ trade accounts receivable without recourse to such customers’ financial institutions.  To the extent that these arrangements are terminated, our financial condition, results of operations, cash flows and liquidity could be adversely affected by extended payment terms, delays or failures in collecting trade accounts receivables.  The utility of the supply chain financing arrangements also depends upon the LIBOR rate, as it is a component of the discount rate applicable to each arrangement.  If the LIBOR rate increases significantly, we may be negatively impacted as we may not be able to pass these added costs on to our customers, which could have a material and adverse effect upon our financial condition, results of operations and cash flows.

Increasing our indebtedness could negatively affect our financial health.

We have an existing revolving bank credit facility of $250 million with JPMorgan Chase Bank, N.A., as agent, and a syndicate of lenders, which we refer to throughout this Report as our revolving credit facility.  As of December 31, 2020, our total outstanding indebtedness was $10.2 million, of which amount $10 million of outstanding indebtedness and approximately $237.1 million of availability was attributable to this revolving credit facility.  Any significant increase in our indebtedness could increase our vulnerability to general adverse economic and industry conditions and limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate.

Availability under our revolving credit facility is based on a formula of eligible accounts receivable, eligible drafts presented to financial institutions under our supply chain financing arrangements and eligible inventory. The loss of business of one or more of our key customers or, a significant reduction in purchases of our products from any one of them, could adversely impact availability under our revolving credit facility. Based upon our availability under the revolving credit agreement at December 31, 2020, the pending loss of business as a result of a large retail customer's decision to pursue a private brand strategy will not significantly impact our availability and/or liquidity as we enter into 2021.

In addition, we have granted the lenders under our revolving credit facility a first priority security interest in substantially all of our assets, including accounts receivable, inventory and certain fixed assets, and those of certain of our subsidiaries. We have also pledged shares of stock in our subsidiaries to those lenders.  If we default on any of our indebtedness, or if we are unable to obtain necessary liquidity, our business could be adversely affected.

We may not be able to generate the significant amount of cash needed to service our indebtedness and fund our future operations.

Our ability either to make payments on or to refinance our indebtedness, or to fund planned capital expenditures and research and development efforts, will depend on our ability to generate cash in the future. Our ability to generate cash is in part subject to:

The occurrence of any of the foregoing factors could result in reduced cash flow, which could have a material adverse effect on us.

Based on our current level of operations, we believe our cash flow from operations, available cash and available borrowings under our revolving credit facility will be adequate to meet our future liquidity needs for at least the next twelve months.  Significant assumptions underlie this belief, including, among other things, that there will be no material adverse developments in our business, liquidity or capital requirements. If we are unable to service our indebtedness, we will be forced to adopt an alternative strategy that may include actions such as:

We cannot assure you that, if material adverse developments in our business, liquidity or capital requirements should occur, our business will generate sufficient cash flow from operations, or that future borrowings will be available to us under our revolving credit facility in amounts sufficient to enable us to pay the principal and interest on our indebtedness, or to fund our other liquidity needs. In addition, if we default on any of our indebtedness, or breach any financial covenant in our revolving credit facility, our business could be adversely affected.

The proposed phase-out of the London Interbank Offered Rate (LIBOR) could materially impact our borrowing costs under our secured revolving credit facility or the utility of our supply chain financing arrangements.

Our secured revolving credit facility and certain of our supply chain financing arrangements utilize LIBOR for the purpose of determining the interest rate on certain borrowings or the discount rate on the sale of trade accounts receivable, respectively.  In July 2017, the U.K. Financial Conduct Authority, which regulates LIBOR, announced that, after the end of 2021, it would no longer compel contributing banks to make rate submissions for the purposes of setting LIBOR.  As a result, it is possible that commencing in 2022, LIBOR may cease to be available or may cease to be deemed an appropriate reference rate, and we may need to amend our credit agreement and supply chain financing arrangements to utilize an alternative reference rate based on the then prevailing market convention at the time.  Although we do not believe that the proposed phase-out of LIBOR will materially impact our business, financial condition or results of operations, we can provide no assurances that any such alternative reference rate will be similar to LIBOR, or produce the same value or economic equivalence of LIBOR, or have the same volume or liquidity as LIBOR prior to its discontinuance.

Risks Related to External Factors

Our business, results of operations and financial condition could be materially adversely affected by the effects of widespread public health crises, including the novel coronavirus (COVID-19) pandemic, that are beyond our control.

The global outbreak of the novel coronavirus (COVID-19) pandemic has created significant volatility, uncertainty and economic disruption in many countries in which we operate, including the United States, Mexico, Canada, Poland, the U.K. and China, and could have a material adverse effect on our business, results of operations and financial condition.  Ultimately, the duration and severity of the pandemic may vary depending on the characteristics of the virus and the public health response; therefore, the nature and extent of its impact on our business and operations may be uncertain and beyond our control.  Customer demand for our products and customer preferences regarding product mix and distribution channels could be impacted as a result of the COVID-19 pandemic, and significant uncertainty exists with respect to the potential future impact of the pandemic as well as a deterioration of general economic conditions, including high unemployment and a possible national or global recession.

If customer demand were to decrease in future periods, or if customer preferences regarding product mix and distribution channels were to change, we may be required to adjust and reduce production volumes and implement cost reduction and cash preservation initiatives, including potential reductions in capital expenditures and employee furloughs, which could have a material adverse impact on our business, results of operations and financial condition.

In certain countries in which we operate, national, state and local governments implemented a variety of   measures in response to the COVID-19 pandemic, including by declaring states of emergency, restricting people from gathering in groups or interacting within a certain physical distance (i.e., social distancing), restricting or limiting the operations of businesses deemed to be non-essential, and imposing travel restrictions on individuals, including restrictions requiring individuals to stay at their place of residence except to perform certain activities deemed to be essential.  In certain jurisdictions, these governmental measures have been eased through planned, phased in “re-openings;” however, in other jurisdictions, re-opening plans have been subsequently paused or reversed in response to an increase in the number of new COVID-19 cases.  Although we have been able to continue to perform, with certain modifications, all of the material operations at all of our principal facilities, we can provide no assurances that we will be able to continue to perform such operations in the future without disruption, such as temporary closures, as a result of new or modifications to existing governmental measures in response to the COVID-19 pandemic.  Any restrictions or limitations on our ability to perform such operations in the future without disruption, such as temporary closures, as a result of governmental measures in response to the pandemic could have a material adverse effect on our business, results of operations and financial condition.

The COVID-19 pandemic could cause material disruptions to our business and operations as a result of worker absenteeism due to illness or other factors, and the implementation of various exposure-reducing and infection prevention measures, such as facility modifications, updated policies for high risk employees, work-from-home allowances, cleaning and disinfecting measures, social distancing, staggered work shifts and reduced operations and production volumes.  We have had to temporarily suspend operations to clean and disinfect areas within our facilities where employees, who later tested positive or exhibited symptoms of COVID-19 performed work.  Depending on the extent and duration of these disruptions, and their effects on our business and operations, our costs could increase, including our costs to address the health and safety of our employees, our ability to manufacture and distribute product to satisfy demand for our products could be adversely impacted and, as a result, our business, financial condition and results of operations could be materially adversely affected.

Furthermore, the COVID-19 pandemic could have a material adverse effect on the business, operations and financial condition of our customers, suppliers and other supply chain partners as a result of the governmental measures described above, disruptions to their business and operations for reasons similar to those described above, and their ability to manage and mitigate the adverse effects of these and other risks unique to their business and operations that may arise as a result of the pandemic.

We conduct our manufacturing and distribution operations on a worldwide basis and are subject to risks associated with doing business outside the United States.

We have manufacturing and distribution facilities in many countries, including Canada, Poland, Mexico and China, and increasing our manufacturing footprint in low cost regions is an important element of our strategy.  There are a number of risks associated with doing business internationally, including: (a) exposure to local economic and political conditions; (b) social unrest such as risks of terrorism or other hostilities; (c) currency exchange rate fluctuations and currency controls; (d) the effect of potential changes in U.S. trade policy and international trade agreements; and (e) the potential for shortages of trained labor.

In particular, there has been social unrest in Hong Kong and Mexico and any increased violence in or around our facilities in such countries could be disruptive to our business operations at such facilities, or present risks to our employees who may be directly affected by the violence and may result in a decision by them to relocate from the area, or make it difficult for us to recruit or retain talented employees at such facilities.

Furthermore, changes in U.S. trade policy, particularly as it relates to China, have resulted in the assessment of increased tariffs on goods that we import into the United States, and have caused uncertainty about the future of free trade generally.  We benefit from free trade agreements, such as the U.S.-Mexico-Canada Agreement (USMCA).  The repeal or modification of the USMCA or further increases to tariffs on goods imported into the United States could increase our costs to source materials, component parts and finished goods from other countries.  The likelihood of such occurrences and their potential effect on us is unpredictable and may vary from country to country. Any such occurrences could be harmful to our business and our financial results.

We may incur liabilities under government regulations and environmental laws, which may have a material adverse effect on our business, financial condition and results of operations.

Domestic and foreign political developments and government regulations and policies directly affect automotive consumer products in the United States and abroad.  Regulations and policies relating to over-the-highway vehicles include standards established by the United States Department of Transportation for motor vehicle safety and emissions.  The modification of existing laws, regulations or policies, or the adoption of new laws, regulations or policies could have a material adverse effect on our business, financial condition and results of operations.

Our operations and properties are subject to a wide variety of increasingly complex and stringent federal, state, local and international laws and regulations, including those governing the use, storage, handling, generation, treatment, emission, release, discharge and disposal of materials, substances and wastes, the remediation of contaminated soil and groundwater and the health and safety of employees. Such environmental laws, including but not limited to those under the Comprehensive Environmental Response Compensation & Liability Act, may impose joint and several liability and may apply to conditions at properties presently or formerly owned or operated by an entity or its predecessors, as well as to conditions at properties at which wastes or other contamination attributable to an entity or its predecessors have been sent or otherwise come to be located.

The nature of our operations exposes us to the risk of claims with respect to such matters, and we can give no assurance that violations of such laws have not occurred or will not occur or that material costs or liabilities will not be incurred in connection with such claims.  We are currently monitoring our environmental remediation efforts at one of our facilities and our reserve balance related to the environmental clean-up at this facility is $1.7 million at December 31, 2020.  The environmental testing and any remediation costs at such facility may be covered by several insurance policies, although we can give no assurance that our insurance will cover any environmental remediation claims.  We also maintain insurance to cover our existing U.S. and Canadian facilities. We can give no assurance that the future cost of compliance with existing environmental laws and the liability for known environmental claims pursuant to such environmental laws will not give rise to additional significant expenditures or liabilities that would be material to us. In addition, future events, such as new information, changes in existing environmental laws or their interpretation, and more vigorous enforcement policies of federal, state or local regulatory agencies, may have a material adverse effect on our business, financial condition and results of operations.

Our future performance may be materially adversely affected by changes in technologies and improvements in the quality of new vehicle parts.

Changes in automotive technologies, such as vehicles powered by fuel cells or electricity, could negatively affect sales to our aftermarket customers. These factors could result in less demand for our products thereby causing a decline in our results of operations or deterioration in our business and financial condition and may have a material adverse effect on our long-term performance.

In addition, the size of the automobile replacement parts market depends, in part, upon the growth in number of vehicles on the road, increase in average vehicle age, change in total miles driven per year, new or modified environmental and vehicle safety regulations, including fuel-efficiency and emissions reduction standards, increase in pricing of new cars and new car quality and related warranties. The automobile replacement parts market has been negatively impacted by the fact that the quality of more recent automotive vehicles and their component parts (and related warranties) has improved, thereby lengthening the repair cycle. Generally, if parts last longer, there will be less demand for our products and the average useful life of automobile parts has been steadily increasing in recent years due to innovations in products and technology. In addition, the introduction by original equipment manufacturers of increased warranty and maintenance initiatives has the potential to decrease the demand for our products. When proper maintenance and repair procedures are followed, newer air conditioning (A/C) systems in particular are less prone to leak resulting in fewer A/C system repairs. These factors could have a material adverse effect on our business, financial condition and results of operations.

None.

We maintain our executive offices in Long Island City, New York. The table below describes our principal facilities as of December 31, 2020.

The information required by this Item is incorporated herein by reference to the information set forth in Item 8, “Financial Statements and Supplementary Data” of this Report under the captions “Asbestos” and “Other Litigation” appearing in Note 21, “Commitments and Contingencies” of the Notes to Consolidated Financial Statements.

Not applicable.

PART II

Our common stock trades publicly on the New York Stock Exchange (“NYSE”) under the trading symbol “SMP.”  The last reported sale price of our common stock on the NYSE on February 22, 2021 was $42.47 per share.  As of February 22, 2021, there were 440 holders of record of our common stock.

Dividends are declared and paid on the common stock at the discretion of our Board of Directors (the “Board”) and depend on our profitability, financial condition, capital needs, future prospects, and other factors deemed relevant by our Board.  After temporarily suspending our quarterly cash dividend payment in the second quarter of 2020, in October 2020, our Board approved the reinstatement of our quarterly cash dividend payment of $0.25 per share. Our revolving credit facility permits dividends and distributions by us provided specific conditions are met.  For information related to our revolving credit facility, see Note 11, “Credit Facilities and Long-Term Debt,” of the Notes to Consolidated Financial Statements in Item 8 of this Report.

There have been no unregistered offerings of our common stock during the fourth quarter of 2020.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

For information related to our stock repurchases, see Note 12, “Stockholders’ Equity,” of the Notes to Consolidated Financial Statements in Item 8 of this Report.

The following table provides information relating to the Company’s purchases of its common stock for the fourth quarter of 2020:

(1)	All shares were purchased through the publicly announced stock repurchase programs in open market transactions.

Stock Performance Graph

The following graph compares the five year cumulative total return on the Company’s Common Stock to the total returns on the Standard & Poor’s 500 Stock Index and the S&P 1500 Auto Parts & Equipment Index, which is a combination of automotive parts and equipment companies within the S&P 400, the S&P 500 and the S&P 600.  The graph shows the change in value of a $100 investment in the Company’s Common Stock and each of the above indices on December 31, 2015 and the reinvestment of all dividends. The comparisons in this table are required by the Securities and Exchange Commission and are not intended to forecast or be indicative of possible future performance of the Company’s Common Stock or the referenced indices.

 

* Source: S&P Capital IQ

The following table sets forth selected consolidated financial data for the five years ended December 31, 2020.  This selected consolidated financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and the notes thereto included elsewhere in this Form 10-K.  Certain prior period amounts have been reclassified to conform to the 2020 presentation.

Notes to Selected Financial Data

(1)

In December 2020, a large retail customer informed us of its decision to pursue a private brand strategy for its engine management product line.  As a result of this development, we anticipate that revenues sold under the BWD trademark will be significantly reduced and uncertain beyond the first quarter of 2021.  In connection with the decision, we recorded an impairment charge of $2.6 million in 2020.

The following discussion should be read in conjunction with our consolidated financial statements and the notes thereto. This discussion summarizes the significant factors affecting our results of operations and the financial condition of our business during each of the fiscal years in the three-year period ended December 31, 2020.

Overview

We are a leading independent manufacturer and distributor of premium replacement parts for the engine management and temperature control systems of motor vehicles in the automotive aftermarket industry with a complementary focus on the heavy duty, industrial equipment and original equipment markets.

 

We are organized into two operating segments.  Each segment focuses on providing our customers with full-line coverage of its products, and a full suite of complementary services that are tailored to our customers’ business needs and driving end-user demand for our products.  We sell our products primarily to automotive aftermarket retailers, program distribution groups, warehouse distributors, original equipment manufacturers and original equipment service part operations in the United States, Canada, Europe, Asia, Mexico and other Latin American countries.

Our Business Strategy

Our mission is to be the best full-line, full-service supplier of premium engine management and temperature control products.

The key elements of our strategy are as follows:

To maintain our strong competitive position, we remain committed to the following:

The Automotive Aftermarket

The automotive aftermarket replacement parts business differs substantially from the original equipment manufacturers (“OEM”) parts business.  Unlike the OEM parts business that primarily follows trends in new car production, the automotive aftermarket replacement parts business primarily tends to follow different trends, such as:

The automotive aftermarket industry is comprised of a large number of diverse manufacturers varying in product specialization and size.  In addition to manufacturing, aftermarket companies must allocate resources towards an efficient distribution process in order to maintain the flexibility and responsiveness on which their customers depend.  Aftermarket manufacturers must be efficient producers of small lot sizes, and must distribute, with rapid turnaround times, products for nearly all domestic and import vehicles on the road today.

Seasonality.  Historically, our operating results have fluctuated by quarter, with the greatest sales occurring in the second and third quarters of the year and revenues generally being recognized at the time of shipment. It is in these quarters that demand for our products is typically the highest, specifically in the Temperature Control Segment of our business.  In addition to this seasonality, the demand for our Temperature Control products during the second and third quarters of the year may vary significantly with the summer weather and customer inventories.  Ordinarily, a warm summer, as we experienced in 2020, would increase the demand for our temperature control products, while a somewhat mild summer, as we experienced in 2019, may lessen such demand.  In 2020, however, due to the impact of the COVID-19 pandemic, we initially experienced a significant reduction in customer demand for our products in the second quarter, with customer demand strengthening in the last half of the quarter and continuing throughout the second half of the year.  As a result of this seasonality and variability in demand of our Temperature Control products, our working capital requirements typically peak near the end of the second quarter, as the inventory build‑up of air conditioning products is converted to sales and payments on the receivables associated with such sales have yet to be received. During this period, our working capital requirements are typically funded by borrowing from our revolving credit facility.

Inventory Management. We face inventory management issues as a result of overstock returns.  We permit our customers to return new, undamaged products to us within customer-specific limits (which are generally limited to a specified percentage of their annual purchases from us) in the event that they have overstocked their inventories.  In addition, the seasonality of our Temperature Control Segment requires that we increase our inventory during the winter season in preparation of the summer selling season and customers purchasing such inventory have the right to make returns.  We accrue for overstock returns as a percentage of sales after giving consideration to recent returns history.

Discounts, Allowances, and Incentives. We offer a variety of usual customer discounts, allowances and incentives.  First, we offer cash discounts for paying invoices in accordance with the specified discount terms of the invoice.  Second, we offer pricing discounts based on volume purchased from us and participation in our cost reduction initiatives.  These discounts are principally in the form of “off-invoice” discounts and are immediately deducted from sales at the time of sale. For those customers that choose to receive a payment on a quarterly basis instead of “off-invoice,” we accrue for such payments as the related sales are made and reduce sales accordingly.  Finally, rebates and discounts are provided to customers as advertising and sales force allowances, and allowances for warranty and overstock returns are also provided.  Management analyzes historical returns, current economic trends, and changes in customer demand when evaluating the adequacy of the sales returns and other allowances. Significant management judgments and estimates must be made and used in connection with establishing the sales returns and other allowances in any accounting period.  We account for these discounts and allowances as a reduction to revenues, and record them when sales are recorded.

Impact of the Novel Coronavirus (“COVID-19”)

The global outbreak of the novel coronavirus (COVID-19) pandemic has created significant volatility, uncertainty and economic disruption in many countries in which we operate, including the United States, Mexico, Canada, Poland, and China.  In certain countries in which we operate, national, state and local governments implemented a variety of measures in response to the COVID-19 pandemic that had the effect of restricting or limiting, among other activities, the operations of certain businesses.  While many of these measures have eased, allowing for increased economic activity, there can be no assurances that restrictive measures will not be implemented again if the outbreak were to increase.

 

As we were declared an essential business under national and regional shelter-in-place orders, our business operations have continued throughout 2020.  Although we initially experienced a significant reduction in customer demand for our products in the second quarter of 2020, our business began to rebound in the last half of the quarter as we experienced an increase in incoming orders and increased demand for our products.  This trend continued into the second half of 2020 as our business improved to pre-COVID-19 levels with our customers’ POS sales exceeding their comparable figures for 2019, resulting in strong second half of 2020 results.

In response to the COVID-19 pandemic, we established a committee, comprised of our executive officers, to oversee the Company’s risk identification, management and mitigation strategies regarding the impact of the pandemic on our business and operations.  Among the issues that are actively being managed by the committee are those relating to the management of inventories and production volumes, cost reduction and cash preservation initiatives, and the enactment of policies and practices to ensure the health and safety of our employees, contractors and customers, as well as the impact of the continued duration and scope of the pandemic, of governmental measures in response to the pandemic, of potentially declining customer demand for our products, and of the potential future deterioration of general economic conditions and disruptions in our supply chain.  The committee continues to meet on a regular basis, closely monitoring events related to the pandemic and any appropriate actions that may be taken.

Commencing in the second quarter of 2020, we implemented many cost reduction measures in response to the impact of the COVID-19 pandemic on our business, including the reduction of discretionary spending, salary reductions of our executive officers and Board of Directors, and suspension of our quarterly cash dividend payments and stock repurchases.  In September 2020, our Board of Directors approved to reinstate our stock repurchase program; and in October 2020 our Board of Directors approved the reinstatement of our quarterly cash dividend of $0.25 per share.  In November 2020, we reinstated the salaries of our executive officers and Board of Directors and retroactively restored their compensation.

Regarding the health and welfare of our employees, contractors and customers, we have implemented a number of policies and practices at all of our facilities.  We have provided personal protection equipment, including face masks and gloves, to all our employees and require their usage while at work, have installed Plexiglas partitions where appropriate, and require temperature checks for all employees and visitors upon entering our facilities.  We have established protocols for individuals who have tested positive, and for employees who have symptoms or have been exposed to the virus.  All of our facilities are thoroughly cleaned and sanitized daily, and all state mandated protocols are followed as employees return to work after the lifting of shelter-in-place orders. The health and safety of our employees, vendors and visitors has always been and will continue to be our first priority.

The effects of the COVID-19 pandemic on our business, financial condition and results of operations in future periods may continue to be significant based upon the significant volatility, uncertainty and potential economic disruption caused by the pandemic.

See “Comparison of Results of Operations for Fiscal Years 2020 and 2019” of this Report for a further discussion of the impact of the COVID-19 pandemic on our business, results of operations and financial condition.

Impact of CARES Act and International Wage Subsidies

In March 2020, the U.S. enacted the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”).  The CARES Act was passed to protect Americans from the public health and economic impacts of COVID-19.  The CARES Act provides for fast and direct assistance for American workers, families and small businesses, and preserves jobs for American industries. As related to the preservation of jobs for American industries, the CARES Act includes the enactment of an employee retention feature, a payroll tax deferral opportunity and, in certain instances, payroll support and business loans.

The payroll tax deferral opportunity in the CARES Act enables businesses to enhance their cash flow by permitting the cash deferral of the payment of the employer’s share of the Social Security tax they otherwise would be responsible for paying to the federal government with respect to their employees.  The amount of the cash deferral will be paid over the next two years, with 50% of the amount to be paid by December 31, 2021 and the remaining 50% by December 31, 2022.  In April 2020, we elected to defer our share of the employers’ Social Security tax relating to wages paid to our employees.  The total cash deferral as of December 31, 2020 is $5.5 million, which we plan to pay equally by December 31, 2021 and 2022.

The employee retention feature of the CARES Act enables employers to obtain a tax credit for wages paid to employees unable to provide services to the company as a result of COVID-19.  The tax credit is limited to 50% of up to $10,000 of wages per employee paid, or incurred, from March 13, 2020 through December 31, 2020.  Although our manufacturing facilities were deemed to be an essential business and continued to operate, our headquarters in Long Island City, New York were forced to close under the New York State shelter-in-place mandate by the governor, which resulted in a $0.9 million tax credit as of December 31, 2020.

Additionally, we filed for wage subsidies in Canada and Poland under laws in those countries.  After qualifying, in August 2020, we received a wage subsidy of CND $1.7 million (approximately US $1.3 million) from the Canadian government, and a wage subsidy of Zloty 2.8 million (approximately US $0.7 million) from the Polish government.

Impact of Changes in U.S. Trade Policy

Changes in U.S. trade policy, particularly as it relates to China, as with much of our industry, have resulted in the assessment of increased tariffs on goods that we import into the United States.  Although our operating results in 2020 have been only slightly impacted by the tariff costs associated with Chinese sourced products, we have taken, and continue to take, several actions to mitigate the impact of the increased tariffs, including but not limited to, price increases to our customers.  We do not anticipate that the increased tariffs will have a significant impact on our future operating results.  Although we are confident that we will be able to pass along the impact of the increased tariffs to our customers, there can be no assurances that we will be able to pass on the entire increased costs imposed by the tariffs.

Sales.  Consolidated net sales for 2020 were $1,128.6 million, a decrease of $9.3 million, or 0.8%, compared to $1,137.9 million in the same period of 2019, with the majority of our net sales to customers located in the United States.  Consolidated net sales decreased in our Engine Management Segment and increased in our Temperature Control Segment.

The following table summarizes consolidated net sales by segment and by major product group within each segment for the years ended December 31, 2020 and 2019 (in thousands):

Engine Management’s net sales decreased $13.5 million, or 1.6%, to $835.7 million for the year ended December 31, 2020.  Net sales in ignition, emission control, fuel and safety related system products for the year ended December 31, 2020 were $691.7 million, a decrease of $14.3 million, or 2%, compared to $706 million in the same period of 2019.  Net sales in the wire and cable product group for the year ended December 31, 2020 were $144 million, an increase of $0.8 million, or 0.6%, compared to $143.2 million in the same period of 2019.  Engine Management’s decrease in net sales for the year ended December 31, 2020 compared to the same period in 2019 results primarily from lower year-over-year net sales in the second quarter of 2020 reflective of the impact of the COVID-19 pandemic and the resulting national and regional shelter-in-place orders related thereto.  After a downturn in net sales initially in the second quarter of 2020 due to impact of the COVID-19 pandemic, customer orders strengthened in the last half of the second quarter and continued throughout the second half of 2020, resulting in strong Engine Management net sales in the second half of 2020, which have largely offset the steep declines experienced earlier in the year.

Temperature Control’s net sales increased $3.6 million, or 1.3%, to $282 million for the year ended December 31, 2020.  Net sales in the compressors product group for the year ended December 31, 2020 were $163.1 million, an increase of $2.6 million, or 1.6%, compared to $160.5 million in the same period of 2019.  Net sales in the other climate control parts group for the year ended December 31, 2020 were $118.9 million, an increase of $1 million, or 0.9%, compared to $117.9 million for the year ended December 31, 2019.  Temperature Control’s increase in net sales for the year ended December 31, 2020, when compared to the same period in 2019, reflects the impact of a strong second half of the year after a significant year-over-year decrease in net sales in the first and second quarters of 2020.  The lower year-over-year net sales in the first half of 2020 reflects the impact of strong pre-season orders in the first quarter of 2019 that did not recur in the first quarter of 2020; and the impact in the second quarter of 2020 of the COVID-19 pandemic and resulting national and regional shelter-in-place orders related thereto.  After a downturn in net sales in the first quarter of 2020, and initially in the second quarter of 2020 due to impact of the COVID-19 pandemic, Temperature Control’s net sales strengthened in the last half of the second quarter and continued throughout the second half of 2020, aided by the impact of very warm summer weather conditions, which more than offset the declines earlier in the year.  Demand for our Temperature Control products may vary significantly with summer weather conditions and customer inventory levels.

Margins.  Gross margins, as a percentage of consolidated net sales, increased to 29.8% for 2020, compared to 29.2% for 2019.  The following table summarizes gross margins by segment for the years ended December 31, 2020 and 2019, respectively (in thousands):

 

Compared to 2019, gross margins at Engine Management increased 0.5 percentage points from 29.6% to 30.1%, while gross margins at Temperature Control increased 1.5 percentage points from 25.2% to 26.7%. The gross margin percentage increases at both Engine Management and Temperature Control reflect the impact of improved year-over-year absorption in the third and fourth quarters of 2020, as production volumes increased due to higher year-over-year customer demand, which more than offset the decline in gross margins in the second quarter of 2020 caused by lower absorption and production volumes.  The lower production volume at both Engine Management and Temperature Control in the second quarter of 2020 was reflective of the general slowdown in the worldwide economy caused by the COVID-19 pandemic, as we temporarily reduced production levels in several of our facilities in line with lower customer demand.  As customer demand began to increase, the production levels at all of our facilities were adjusted to meet the increase in customer demand, resulting in higher year-over-year production volumes in the second half of 2020.

Selling, General and Administrative Expenses.  Selling, general and administrative expenses (“SG&A”) decreased to $224.7 million, or 19.9% of consolidated net sales in 2020, as compared to $234.7 million, or 20.6% of consolidated net sales in 2019.  The $10 million decrease in SG&A expenses as compared to 2019 is principally due to lower selling and marketing expenses, lower costs incurred related to our accounts receivable supply chain financing arrangements resulting primarily from lower discount rates, annual savings initiatives, and to a lesser extent by certain non-recurring benefits from cost reduction initiatives.  These decreases more than offset the impact of slightly higher distribution expenses, COVID-19 related costs, and $1.1 million of incremental expenses from our April 2019 acquisition of certain assets and liabilities of the Pollak business of Stoneridge Inc., including amortization of intangible assets acquired.

Intangible Asset Impairment.  In December 2020, a large retail customer informed us of its decision to pursue a private brand strategy for its engine management product line.  As a result of this development, we anticipate that products sold under the BWD trademark will be significantly reduced and uncertain beyond the first quarter of 2021.  In connection with the decision, we recorded an impairment charge of $2.6 million in 2020.

Restructuring and Integration Expenses.  Restructuring and integration expenses were $0.5 million in 2020 compared to restructuring and integration expenses of $2.6 million in 2019.  Restructuring and integration expenses incurred in 2020 relate to (1) $0.3 million in environmental cleanup costs for ongoing monitoring and remediation in connection with the prior closure of our manufacturing operations at our Long Island City, New York location, and (2) $0.2 million in costs related to the residual relocation activities in our Engine Management segment in connection with our integration of the Pollak business of Stoneridge, Inc., acquired in April 2019.  Restructuring and integration expenses incurred in 2019 of $2.6 million consisted of (1) $2.2 million of expenses related to relocation of certain inventory, machinery and equipment acquired in our April 2019 acquisition of the Pollak business of Stoneridge, Inc. to our existing facilities, and (2) $0.4 million in environmental cleanup costs for the ongoing monitoring and remediation at our Long Island City, New York former manufacturing facility.

Operating Income.  Operating income was $108.9 million in 2020, compared to $94.5 million in 2019.  The year-over-year increase in operating income of $14.4 million is the result of the impact of higher gross margins as a percentage of consolidated net sales, lower SG&A expenses and lower restructuring and integration expenses, which more than offset the impact of lower consolidated net sales and the impairment charge related to the BWD trademark.

Other Non-Operating Income (Expense), Net.  Other non-operating income, net was $0.8 million in 2020, compared to $2.6 million in 2019.  The year-over-year decrease in other non-operating income, net results primarily from the decrease in year-over-year equity income from our joint ventures, which more than offset the year-over-year reduction in foreign exchange losses.  The lower year-over-year equity income from our joint ventures is reflective of the general slowdown in the worldwide economy caused by the COVID-19 pandemic.

Interest Expense.  Interest expense decreased to $2.3 million in 2020, compared to $5.3 million in 2019.  The year-over-year decrease in interest expense reflects the impact of lower year-over-year average interest rates on our revolving credit facility, and lower average outstanding borrowings in 2020 when compared to 2019.

Income Tax Provision.  The income tax provision for 2020 was $27 million at an effective tax rate of 25.1%, compared to $22.7 million at an effective tax rate of 24.8% in 2019.  The higher effective tax rate in 2020 compared to 2019 results primarily from an increase in state and local taxes, and a change in the mix of U.S. and foreign income.

Loss From Discontinued Operations.  Loss from discontinued operations, net of income tax, reflects information contained in the actuarial studies performed as of August 31, 2020 and updated in December 2020 to reflect events that occurred in the fourth quarter of 2020, and as of August 31, 2019, as well as other information available and considered by us, and legal expenses and other costs associated with our asbestos-related liability.  During the years ended December 31, 2020 and 2019, we recorded a net loss of $23 million and $11.1 million from discontinued operations, respectively.  The loss from discontinued operations for the year ended December 31, 2020 and 2019 includes a $25.7 million and $9.7 million pre-tax provision, respectively, to increase our indemnity liability in line with the 2020 and 2019 actuarial studies; and legal expenses and other miscellaneous expenses, before taxes, of $5.4 million during both 2020 and 2019.  As discussed more fully in Note 21 “Commitments and Contingencies” in the notes to our consolidated financial statements, we are responsible for certain future liabilities relating to alleged exposure to asbestos containing products.

All of our restructuring and integration programs have been substantially completed.  For a detailed discussion on the restructuring and integration costs, see Note 3, “Restructuring and Integration Expense,” of the notes to our consolidated financial statements.

Liquidity and Capital Resources

Operating Activities.  During 2020, cash provided by operating activities was $97.9 million compared to $76.9 million in 2019.  The year-over-year increase in operating cash flow is primarily the result of the decrease in inventories compared to the year-over-year increase in inventories in 2019, the smaller year-over-year increase in prepaid expenses and other current assets, the increase in accounts payable compared to the year-over-year decrease in accounts payable in 2019, and the increase in sundry payables and accrued expenses compared to the year-over-year decrease in sundry payables and accrued expenses in 2019, partially offset by the increase in accounts receivable compared to the year-over-year decrease in accounts receivable in 2019.

Net earnings during 2020, were $57.4 million compared to $57.9 million in 2019.  During 2020, (1) the increase in accounts receivable was $71.9 million compared to the year-over-year decrease in accounts receivable of $2.8 million in 2019; (2) the decrease in inventories was $18 million compared to the year-over-year increase in inventories of $17.9 million in 2019; (3) the increase in accounts payable was $7.4 million compared to the year-over-year decrease in accounts payable of $2 million in 2019; (4) the increase in prepaid expenses and other current assets was $0.4 million compared to the year-over-year increase in prepaid expenses and other current assets of $8.3 million in 2019; and (5) the increase in sundry payables and accrued expenses was $40.7 million compared to the year-over-year decrease in sundry payables and accrued expenses of $3 million in 2019.  The increase in receivables and decrease in inventories during 2020 is reflective of the significant increase in net sales in the second half of 2020 and the timing of cash receipts from customers; while the cash impact of the increase in sundry payables and accrued expenses relates primarily to the timing of the payment of customer rebates.  We continue to actively manage our working capital to maximize our operating cash flow.

Investing Activities.  Cash used in investing activities was $17.8 million in 2020 compared to $54.8 million in 2019.   Investing activities in 2020 consisted of capital expenditures of $17.8 million.

Investing activities in 2019 consisted of (1) net cash proceeds of $4.8 million received in January 2019 from the December 2018 sale of our property in Grapevine, Texas; (2) the payment of $38.4 million for our acquisition of certain assets and liabilities of the Pollak business of Stoneridge, Inc.; (3) the payment of $5.1 million for our acquisition of an approximate 29% minority interest in Foshan Che Yijia New Energy Technology Co., Ltd.; and (4) capital expenditures of $16.2 million.

Financing Activities.  Cash used in financing activities was $71.5 million in 2020 compared to $23.4 million in 2019.  During 2020, (1) we reduced our borrowings under our revolving credit facility by $42.5 million; (2) we reduced our borrowings under lease obligations and our Polish overdraft facility by $4.2 million; (3) we made cash payments for the repurchase of shares of our common stock of $13.5 million; and (4) we paid dividends of $11.2 million.  Cash provided by operating activities was used to pay down our revolving credit facility, our lease obligations and Polish overdraft facility, and to fund our investing activities, purchase shares of our common stock and pay dividends.

Cash used in financing activities was $23.4 million in 2019.  During 2019, (1) we increased borrowings under our revolving credit facility by $8.8 million; (2) we made cash payments for the repurchase of shares of our common stock of $10.7 million; and (3) we paid dividends of $20.6 million.  Borrowings under our revolving credit facility, along with cash provided by operating activities, were used to fund our investing activities, purchase shares of our common stock and pay dividends.

Dividends of $11.2 million and $20.6 million were paid in 2020 and 2019, respectively.  In January 2020, our Board of Directors voted to increase our quarterly dividend from $0.23 per share in 2019 to $0.25 per share in 2020.  In April 2020, in response to the impact of the COVID-19 pandemic on our business, our Board of Directors approved to temporarily suspend our quarterly cash dividend payments and stock repurchases.  In September 2020, our Board of Directors approved to reinstate our stock repurchase program; and in October 2020 our Board of Directors approved the reinstatement of our quarterly cash dividend of $0.25 per share, which was paid on December 1, 2020 to shareholders of record on November 16, 2020.

Liquidity

Our primary cash requirements include working capital, capital expenditures, regular quarterly dividends, stock repurchases, principal and interest payments on indebtedness and acquisitions.  Our primary sources of funds are ongoing net cash flows from operating activities and availability under our secured revolving credit facility (as detailed below).

In December 2018, we amended our Credit Agreement with JPMorgan Chase Bank, N.A., as agent, and a syndicate of lenders.  The amended credit agreement provides for a senior secured revolving credit facility with a line of credit of up to $250 million (with an additional $50 million accordion feature) and extends the maturity date to December 2023.  The line of credit under the amended agreement also allows for a $10 million line of credit to Canada as part of the $250 million available for borrowing.  Direct borrowings under the amended credit agreement bear interest at LIBOR plus a margin ranging from 1.25% to 1.75% based on our borrowing availability, or floating at the alternate base rate plus a margin ranging from 0.25% to 0.75% based on our borrowing availability, at our option.  The amended credit agreement is guaranteed by certain of our subsidiaries and secured by certain of our assets.

Borrowings under the amended credit agreement are secured by substantially all of our assets, including accounts receivable, inventory and certain fixed assets, and those of certain of our subsidiaries.  Availability under the amended credit agreement is based on a formula of eligible accounts receivable, eligible drafts presented to the banks under our supply chain financing arrangements and eligible inventory.  After taking into account outstanding borrowings under the amended credit agreement, there was an additional $237.1 million available for us to borrow pursuant to the formula at December 31, 2020.  The loss of business of one or more of our key customers or, a significant reduction in purchases of our products from any one of them, could adversely impact availability under our revolving credit facility.

Outstanding borrowings under the credit agreement, which are classified as current liabilities, were $10 million and $52.5 million at December 31, 2020 and 2019, respectively; while letters of credit outstanding under the credit agreement were $2.8 million and $3.1 million at December 31, 2020 and 2019, respectively.  Borrowings under the credit agreement have been classified as current liabilities based upon accounting rules and certain provisions in the agreement.

At December 31, 2020, the weighted average interest rate on our amended credit agreement was 1.4%, which consisted of $10 million in direct borrowings.  At December 31, 2019, the weighted average interest rate on our amended credit agreement was 3.5%, which consisted of $40 million in direct borrowings at 2.3% and an alternative base rate loan of $12.5 million at 5%.  Our average daily alternative base rate loan balance was $1.5 million and $1.7 million during 2020 and 2019, respectively.

At any time that our borrowing availability is less than the greater of either (a) $25 million, or 10% of the commitments if fixed assets are not included in the borrowing base, or (b) $31.25 million, or 12.5% of the commitments if fixed assets are included in the borrowing base, the terms of the amended credit agreement provide for, among other provisions, a financial covenant requiring us, on a consolidated basis, to maintain a fixed charge coverage ratio of 1:1 at the end of each fiscal quarter (rolling four quarters).  As of December 31, 2020, we were not subject to these covenants.  The amended credit agreement permits us to pay cash dividends of $20 million and make stock repurchases of $20 million in any fiscal year subject to a minimum availability of $25 million.  Provided specific conditions are met, the amended credit agreement also permits acquisitions, permissible debt financing, capital expenditures, and cash dividend payments and stock repurchases of greater than $20 million.

Our Polish subsidiary, SMP Poland sp. z.o.o., has entered into an overdraft facility with HSBC France (Spolka Akcyjna) Oddzial w Polsce, formerly HSBC Bank Polska S.A., for Zloty 30 million (approximately $8 million).  The facility, as amended, expires in December 2021.  Borrowings under the overdraft facility will bear interest at a rate equal to WIBOR + 1.5% and are guaranteed by Standard Motor Products, Inc., the ultimate parent company.  At December 31, 2020 and 2019, borrowings under the overdraft facility were Zloty 0.4 million (approximately US $0.1 million) and Zloty 16.7 million (approximately US $4.4 million), respectively.

In order to reduce our accounts receivable balances and improve our cash flow, we are party to several supply chain financing arrangements, in which we may sell certain of our customers’ trade accounts receivable to such customers’ financial institutions.  We sell our undivided interests in certain of these receivables at our discretion when we determine that the cost of these arrangements is less than the cost of servicing our receivables with existing debt.  Under the terms of the agreements, we retain no rights or interest, have no obligations with respect to the sold receivables, and do not service the receivables after the sale.  As such, these transactions are being accounted for as a sale.

Pursuant to these agreements, we sold $695.1 million and $719 million of receivables for the years ended December 31, 2020 and 2019, respectively, which was reflected as a reduction of accounts receivable in the consolidated balance sheet at the time of sale.  A charge in the amount of $12.2 million, $22 million and $24.4 million related to the sale of receivables is included in selling, general and administrative expenses in our consolidated statements of operations for the years ended December 31, 2020, 2019 and 2018, respectively.

To the extent that these arrangements are terminated, our financial condition, results of operations, cash flows and liquidity could be adversely affected by extended payment terms, delays or failures in collecting trade accounts receivables.  The utility of the supply chain financing arrangements also depends upon the LIBOR rate, as it is a component of the discount rate applicable to each arrangement.  If the LIBOR rate increases significantly, we may be negatively impacted as we may not be able to pass these added costs on to our customers, which could have a material and adverse effect upon our financial condition, results of operations and cash flows.

In May 2018, our Board of Directors authorized the purchase of up to an additional $20 million of our common stock under a stock repurchase program.  Under this program, during the year ended December 31, 2018 and 2019, we repurchased 201,484 and 221,748 shares of our common stock, respectively, at a total cost of $9.3 million and $10.7 million, respectively, thereby completing the 2018 Board of Directors authorization.

In March 2020, our Board of Directors authorized the purchase of up to $20 million of our common stock under a stock repurchase program.  Under this program, during the year ended December 31, 2020, we repurchased 323,867 shares of our common stock, at a total cost of $13.5 million.  As of December 31, 2020, there was approximately $6.5 million available for future stock purchases under the program.  In February 2021, our Board of Directors authorized the purchase of up to an additional $20 million of our common stock under a new stock repurchase program, thereby increasing the amount available for future stock purchases to approximately $26.5 million.  Stock will be purchased under the programs from time to time, in the open market or through private transactions, as market conditions warrant.

We anticipate that our cash flow from operations, available cash and available borrowings under our revolving credit facility will be adequate to meet our future liquidity needs for at least the next twelve months.  Significant assumptions underlie this belief, including, among other things, that we will be able to mitigate the future impact, if any, of the COVID-19 pandemic and the decision of a large retail customer to pursue a private brand strategy for its engine management product line on our business and operating cash flow by managing our inventories and production levels to align with customer demand for our products, and effectively managing our costs and expenses, and that there will be no material adverse developments in our business, liquidity or capital requirements.  If material adverse developments were to occur in any of these areas, there can be no assurance that our business will generate sufficient cash flow from operations, or that future borrowings will be available to us under our revolving credit facility in amounts sufficient to enable us to pay the principal and interest on our indebtedness, or to fund our other liquidity needs.  In addition, if we default on any of our indebtedness, or breach any financial covenant in our revolving credit facility, our business could be adversely affected.

For further information regarding the risks in our business, refer to Item 1A, “Risk Factors,” of this report.

The following table summarizes our contractual commitments as of December 31, 2020 and expiration dates of commitments through 2028 (a) (b):

Critical Accounting Policies

We have identified the policies below as critical to our business operations and the understanding of our results of operations.  The impact and any associated risks related to these policies on our business operations is discussed throughout “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” where such policies affect our reported and expected financial results.  For a detailed discussion on the application of these and other accounting policies, see Note 1 of the notes to our consolidated financial statements.

You should be aware that preparation of our consolidated annual and quarterly financial statements requires us to make estimates and assumptions that affect the reported amount of assets and liabilities, the disclosure of contingent assets and liabilities at the date of our consolidated financial statements, and the reported amounts of revenue and expenses during the reporting periods. We can give no assurance that actual results will not differ from those estimates.  Although we do not believe that there is a reasonable likelihood that there will be a material change in the future estimates, or in the assumptions that we use in calculating the estimates, the uncertain future effects, if any, of the COVID-19 pandemic, and other unforeseen changes in the industry, or business, could materially impact the estimates, and may have a material adverse effect on our business, financial condition and results of operations.

Revenue Recognition.  We derive our revenue primarily from sales of replacement parts for motor vehicles from both our Engine Management and Temperature Control Segments. We recognize revenues when our performance obligation has been satisfied and the control of products has been transferred to a customer which typically occurs upon shipment.  Revenue is measured as the amount of consideration we expect to receive in exchange for the transfer of goods or providing services. The amount of consideration we receive and revenue we recognize depends on the marketing incentives, product warranty and overstock returns we offer to our customers.  For certain of our sales of remanufactured products, we also charge our customers a deposit for the return of a used core component which we can use in our future remanufacturing activities.  Such deposit is not recognized as revenue at the time of the sale but rather carried as a core liability.  At the same time, we estimate the core expected to be returned from the customer and record the estimated return as unreturned customer inventory.  The liability is extinguished when a core is actually returned to us, or at period end when we estimate and recognize revenue for the core deposits not expected to be returned.  We estimate and record provisions for cash discounts, quantity rebates, sales returns and warranties in the period the sale is recorded, based upon our prior experience and current trends.  Significant management judgments and estimates must be made and used in estimating sales returns and allowances relating to revenue recognized in any accounting period.

Sales Returns and Other Allowances and Allowance for Doubtful Accounts. Many of our products carry a warranty ranging from a 90-day limited warranty to a lifetime limited warranty, which generally covers defects in materials or workmanship and failure to meet industry published specifications and/or the result of installation error.  In addition to warranty returns, we also permit our customers to return new, undamaged products to us within customer-specific limits (which are generally limited to a specified percentage of their annual purchases from us) in the event that they have overstocked their inventories. At the time products are sold, we accrue a liability for product warranties and overstock returns as a percentage of sales based upon estimates established using historical information on the nature, frequency and average cost of the claim and the probability of the customer return. At the same time, we record an estimate of anticipated customer returns as unreturned customer inventory. Significant judgments and estimates must be made and used in connection with establishing the sales returns and other allowances in any accounting period.  Revision to these estimates is made when necessary, based upon changes in these factors.  We regularly study trends of such claims.  At December 31, 2020 and 2019, the allowance for sales returns was $41 million and $35.2 million, respectively.

Similarly, we must make estimates of the collectability of our accounts receivable. We specifically analyze accounts receivable and analyze historical and current economic trends, as well as reasonable and supportable forecasts, customer concentrations, customer credit‑worthiness, and changes in our customer payment terms when evaluating the adequacy of the allowance for doubtful accounts.  At December 31, 2020, the allowance for doubtful accounts and for discounts was $5.8 million.

New Customer Acquisition Costs.  New customer acquisition costs refer to arrangements pursuant to which we incur change-over costs to induce a new customer to switch from a competitor’s brand.  In addition, change-over costs include the costs related to removing the new customer’s inventory and replacing it with our inventory commonly referred to as a stock lift.  New customer acquisition costs are recorded as a reduction to revenue when incurred.

Inventory Valuation.  Inventories are valued at the lower of cost and net realizable value.  Cost is determined on the first-in, first-out basis.  Where appropriate, standard cost systems are utilized for purposes of determining cost; the standards are adjusted as necessary to ensure they approximate actual costs.  Estimates of lower of cost and net realizable value of inventory are determined by comparing the actual cost of the product to the estimated selling prices in the ordinary course of business less reasonably predictable costs of completion, disposal and transportation of the inventory.

We also evaluate inventories on a regular basis to identify inventory on hand that may be obsolete or in excess of current and future projected market demand.  For inventory deemed to be obsolete, we provide a reserve on the full value of the inventory. Inventory that is in excess of current and projected use is reduced by an allowance to a level that approximates our estimate of future demand.  Future projected demand requires management judgment and is based upon (a) our review of historical trends and (b) our estimate of projected customer specific buying patterns and trends in the industry and markets in which we do business.  Using rolling twelve month historical information, we estimate future demand on a continuous basis.  As such, the historical volatility of such estimates has been minimal.

We utilize cores (used parts) in our remanufacturing processes for air conditioning compressors, diesel injectors, and diesel pumps.  The production of air conditioning compressors, diesel injectors, and diesel pumps involves the rebuilding of used cores, which we acquire either in outright purchases from used parts brokers or from returns pursuant to an exchange program with customers.  Under such exchange programs, at the time of sale of air conditioning compressors, diesel injectors, and diesel pumps, we estimate the core expected to be returned from the customer and record the estimated return as unreturned customer inventory.

In addition, many of our customers can return inventory to us based upon customer warranty and overstock arrangements within customer specific limits.  At the time products are sold, we accrue a liability for product warranties and overstock returns and record as unreturned customer inventory our estimate of anticipated customer returns.  Estimates are based upon historical information on the nature, frequency and probability of the customer return.  Unreturned core, warranty and overstock customer inventory is recorded at standard cost.  Revision to these estimates is made when necessary, based upon changes in these factors.  We regularly study trends of such claims.

Accounting for Income Taxes.  As part of the process of preparing our consolidated financial statements, we are required to estimate our income taxes in each of the jurisdictions in which we operate.  This process involves estimating our actual current tax expense together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes.  These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be recovered from future taxable income, and to the extent we believe that it is more likely than not that the deferred tax assets will not be recovered, we must establish a valuation allowance.  To the extent we establish a valuation allowance or increase or decrease this allowance in a period, we must include an expense or recovery, respectively, within the tax provision in the statement of operations.

We maintain valuation allowances when it is more likely than not that all or a portion of a deferred tax asset will not be realized.  In determining whether a valuation allowance is warranted, we evaluate factors such as prior earnings history, expected future earnings, carryback and carryforward periods and tax strategies. We consider all positive and negative evidence to estimate if sufficient future taxable income will be generated to realize the deferred tax asset.  We consider cumulative losses in recent years as well as the impact of one-time events in assessing our pre-tax earnings.  Assumptions regarding future taxable income require significant judgment.  Our assumptions are consistent with estimates and plans used to manage our business, which includes restructuring and integration initiatives that are expected to generate significant savings in future periods.

The valuation allowance of $1.6 million as of December 31, 2020 is intended to provide for the uncertainty regarding the ultimate realization of our U.S. foreign tax credit carryovers and foreign net operating loss carryovers. The assessment of the adequacy of our valuation allowance is based on our estimates of taxable income in these jurisdictions and the period over which our deferred tax assets will be recoverable.  Based on these considerations, we believe it is more likely than not that we will realize the benefit of the net deferred tax asset of $44.8 million as of December 31, 2020, which is net of the remaining valuation allowance.

In the event that actual results differ from these estimates, or we adjust these estimates in future periods for current trends or expected changes in our estimating assumptions, we may need to modify the level of the valuation allowance which could materially impact our business, financial condition and results of operations.

In accordance with generally accepted accounting practices, we recognize in our financial statements only those tax positions that meet the more-likely-than-not recognition threshold. We establish tax reserves for uncertain tax positions that do not meet this threshold.  During the years ended December 31, 2020, 2019 and 2018, we did not establish a liability for uncertain tax positions.  Penalties associated with income tax matters are included in the provision for income taxes in our consolidated statement of operations.

Leases.  We determine if an arrangement is a lease at inception.  For operating leases, we include and report operating lease right-of-use (“ROU”) assets, sundry payables and accrued expenses, and noncurrent operating lease liabilities on our consolidated balance sheet for leases with a term longer than twelve months.  Finance leases are reported on our consolidated balance sheets in property, plant and equipment, current portion of other debt, and long-term debt.

Operating lease ROU assets and operating lease liabilities are recognized at the lease commencement date based on the present value of the total lease payments over the lease term.  Our ROU assets represent the right to use an underlying leased asset over the existing lease term, and the corresponding lease liabilities represent our obligation to make lease payments arising from the lease agreement.  As most of our leases do not provide for an implicit rate, we use our secured incremental borrowing rate based on the information available when determining the present value of our lease payments.  Our lease terms may include options to terminate, or extend, our lease when it is reasonably certain that we will execute the option.  Lease agreements may contain lease and non-lease components, which are generally accounted for separately.  Operating lease expense is recognized on a straight-line basis over the lease term.

Valuation of Long‑Lived and Intangible Assets and Goodwill.  At acquisition, we estimate and record the fair value of purchased intangible assets, which primarily consist of customer relationships, trademarks and trade names, patents and non-compete agreements.  The fair values of these intangible assets are estimated based on our assessment.  Goodwill is the excess of the purchase price over the fair value of identifiable net assets acquired in business combinations.  Goodwill and certain other intangible assets having indefinite lives are not amortized to earnings, but instead are subject to periodic testing for impairment.  Intangible assets determined to have definite lives are amortized over their remaining useful lives.

We assess the impairment of long‑lived assets, identifiable intangibles assets and goodwill whenever events or changes in circumstances indicate that the carrying value may not be recoverable.  With respect to goodwill and identifiable intangible assets having indefinite lives, we test for impairment on an annual basis or in interim periods if an event occurs or circumstances change that may indicate the fair value is below its carrying amount.  Factors we consider important, which could trigger an impairment review, include the following: (a) significant underperformance relative to expected historical or projected future operating results; (b) significant changes in the manner of our use of the acquired assets or the strategy for our overall business; and (c) significant negative industry or economic trends.  We review the fair values using the discounted cash flows method and market multiples.

When performing our evaluation of goodwill for impairment, if we conclude qualitatively that it is not more likely than not that the fair value of the reporting unit is less than its carrying amount, then a quantitative impairment test would not required.  If we are unable to reach this conclusion, then we would perform a goodwill quantitative impairment test.  In performing the quantitative test, the fair value of the reporting unit is compared to its carrying amount.  A charge for impairment is recognized by the amount by which the reporting unit’s carrying amount exceeds its fair value, not to exceed the total amount of goodwill allocated to the reporting unit.

Identifiable intangible assets having indefinite lives are reviewed for impairment on an annual basis using a methodology similar with that used to evaluate goodwill.  Intangible assets having definite lives and other long-lived assets are reviewed for impairment whenever events such as product discontinuance, plant closures, product dispositions or other changes in circumstances indicate that the carrying amount may not be recoverable.  In reviewing for impairment, we compare the carrying value of such assets to the estimated undiscounted future cash flows expected from the use of the assets and their eventual disposition.  When the estimated undiscounted future cash flows are less than their carrying amount, an impairment loss is recognized equal to the difference between the assets fair value and their carrying value.

There are inherent assumptions and estimates used in developing future cash flows requiring our judgment in applying these assumptions and estimates to the analysis of identifiable intangibles and long‑lived asset impairment including projecting revenues, interest rates, tax rates and the cost of capital.  Many of the factors used in assessing fair value are outside our control and it is reasonably likely that assumptions and estimates will change in future periods.  These changes can result in future impairments.  In the event our planning assumptions were modified resulting in impairment to our assets, we would be required to include an expense in our statement of operations, which could materially impact our business, financial condition and results of operations.

Share-Based Compensation.  The provisions of FASB ASC 718, Stock Compensation, require the measurement and recognition of compensation expense for all share-based payment awards made to employees and directors based on estimated fair values on the grant date.  The value of the portion of the award that is ultimately expected to vest is recognized as expense on a straight-line basis over the requisite service periods in our condensed consolidated statement of operations.  Forfeitures are estimated at the time of grant based on historical trends in order to estimate the amount of share-based awards that will ultimately vest.  We monitor actual forfeitures for any subsequent adjustment to forfeiture rates.

Environmental Reserves.  We are subject to various U.S. Federal, state and local environmental laws and regulations and are involved in certain environmental remediation efforts. We estimate and accrue our liabilities resulting from such matters based upon a variety of factors including the assessments of environmental engineers and consultants who provide estimates of potential liabilities and remediation costs. Such estimates are not discounted to reflect the time value of money due to the uncertainty in estimating the timing of the expenditures, which may extend over several years.  Potential recoveries from insurers or other third parties of environmental remediation liabilities are recognized independently from the recorded liability, and any asset related to the recovery will be recognized only when the realization of the claim for recovery is deemed probable.

Asbestos Litigation.  In evaluating our potential asbestos-related liability, we use an actuarial study that is prepared by a leading actuarial firm with expertise in assessing asbestos-related liabilities.  We evaluate the estimate of the range of undiscounted liability to determine which amount to accrue.  Based on the information contained in the actuarial study and all other available information considered by us, we have concluded that no amount within the range was more likely than any other and, therefore, in assessing our asbestos liability we compare the low end of the range to our recorded liability to determine if an adjustment is required.  Legal costs are expensed as incurred.  We will continue to perform an annual actuarial analysis during the third quarter of each year for the foreseeable future, and whenever events or changes in circumstances indicate that additional provisions may be necessary.  Based on the actuarial studies and all other available information, we will continue to reassess the recorded liability and, if deemed necessary, record an adjustment to the reserve, which will be reflected as a loss or gain from discontinued operations.  See Note 21, “Commitments and Contingencies,” of the Notes to Consolidated Financial Statements in Item 8 of this Report for additional information.

Other Loss Reserves. We have other loss exposures, for such matters as legal claims and legal proceedings.  Establishing loss reserves for these matters requires estimates, judgment of risk exposure, and ultimate liability.  We record provisions when the liability is considered probable and reasonably estimable.  Significant judgment is required in both the determination of probability and the determination as to whether an exposure can be reasonably estimated.  As additional information becomes available, we reassess our potential liability related to these matters.  Such revisions of the potential liabilities could have a material adverse effect on our business, financial condition or results of operations.

Recently Issued Accounting Pronouncements

Quantitative and Qualitative Disclosures about Market Risk

We are exposed to market risk, primarily related to foreign currency exchange and interest rates. These exposures are actively monitored by management. Our exposure to foreign exchange rate risk is due to certain costs, revenues and borrowings being denominated in currencies other than one of our subsidiary’s functional currency.  Similarly, we are exposed to market risk as the result of changes in interest rates, which may affect the cost of our financing. It is our policy and practice to use derivative financial instruments only to the extent necessary to manage exposures.  We do not hold or issue derivative financial instruments for trading or speculative purposes.  As of December 31, 2020, we did not have any derivative financial instruments.

Exchange Rate Risk

We have exchange rate exposure, primarily, with respect to the Canadian Dollar, the Euro, the British Pound, the Polish Zloty, the Mexican Peso, the Taiwan Dollar, the Chinese Yuan Renminbi and the Hong Kong Dollar.  As of December 31, 2020, our monetary assets and liabilities which are subject to this exposure are immaterial, therefore, the potential immediate loss to us that would result from a hypothetical 10% change in foreign currency exchange rates would not be expected to have a material impact on our earnings or cash flows.  This sensitivity analysis assumes an unfavorable 10% fluctuation in the exchange rates affecting the foreign currencies in which monetary assets and liabilities are denominated and does not take into account the incremental effect of such a change on our foreign currency denominated revenues.

Interest Rate Risk

We manage our exposure to interest rate risk through the proportion of fixed rate debt and variable rate debt in our debt portfolio. To manage a portion of our exposure to interest rate changes, we have in the past entered into interest rate swap agreements.  We invest our excess cash in highly liquid short-term investments.  Substantially all of our debt is variable rate debt as of December 31, 2020 and 2019.  Based upon our current level of borrowings under our revolving credit facility and our Polish overdraft facility, and our excess cash, the effect of a hypothetical, instantaneous and unfavorable change of 100 basis points in the interest rate would have an immaterial impact on our earnings or cash flows.

 

In addition, we are party to several supply chain financing arrangements, in which we may sell certain of our customers’ trade accounts receivable to such customers’ financial institutions.  We sell our undivided interests in certain of these receivables at our discretion when we determine that the cost of these arrangements is less than the cost of servicing our receivables with existing debt.  During the year ended December 31, 2020, we sold $695.1 million of receivables.  Depending upon the level of sales of receivables pursuant these agreements, the effect of a hypothetical, instantaneous and unfavorable change of 100 basis points in the margin rate may have an approximate $7.0 million negative impact on our earnings or cash flows.  The charge related to the sale of receivables is included in selling, general and administrative expenses in our consolidated statements of operations.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

MANAGEMENT’S REPORT ON INTERNAL CONTROL

OVER FINANCIAL REPORTING

To the Stockholders of

Standard Motor Products, Inc. and Subsidiaries:

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) or 15d-15(f) of the Exchange Act). Our internal control system was designed to provide reasonable assurance to our management and Board of Directors regarding the preparation and fair presentation of published financial statements.

All internal control systems, no matter how well designed, have inherent limitations. Because of these inherent limitations, internal control over financial reporting can provide only reasonable assurance with respect to financial statement preparation and presentation, and may not prevent or detect misstatements.  Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

We assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2020. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in the 2013 Internal Control - Integrated Framework.  Based on our assessment using those criteria, we concluded that, as of December 31, 2020, our internal control over financial reporting is effective.

Our independent registered public accounting firm, KPMG LLP, has audited our consolidated financial statements as of and for the year ended December 31, 2020 and has also audited the effectiveness of our internal control over financial reporting as of December 31, 2020.  KPMG’s report appears on the following pages of this “Item 8. Financial Statements and Supplementary Data.”

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM –

INTERNAL CONTROL OVER FINANCIAL REPORTING

To the Stockholders and Board of Directors

Standard Motor Products, Inc. and Subsidiaries:

Opinion on Internal Control Over Financial Reporting

We have audited Standard Motor Products, Inc.’s and Subsidiaries (the “Company”) internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated balance sheets of the Company as of December 31, 2020 and 2019, the related consolidated statements of operations, comprehensive income, changes in stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2020, and the related notes and financial statement Schedule II, Valuation and Qualifying Accounts (collectively, the consolidated financial statements), and our report dated February 24, 2021 expressed an unqualified opinion on those consolidated financial statements.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ KPMG LLP

New York, New York

February 24, 2021

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM –

CONSOLIDATED FINANCIAL STATEMENTS

To the Stockholders and Board of Directors
Standard Motor Products, Inc. and Subsidiaries:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of Standard Motor Products, Inc. and Subsidiaries (the “Company”) as of December 31, 2020 and 2019, the related consolidated statements of operations, comprehensive income, changes in stockholders’ equity, and cash flows for each of the years in the three‑year period ended December 31, 2020, and the related notes and financial statement Schedule II, Valuation and Qualifying Accounts (collectively, the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020 and 2019, and the results of its operations and its cash flows for each of the years in the three‑year period ended December 31, 2020, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company’s internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated February 24, 2021 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of a critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Asbestos Liability and Litigation

As discussed in Notes 1 and 21 to the consolidated financial statements, the Company is involved in asbestos litigation and has a potential asbestos liability. As of December 31, 2020, the accrued asbestos liability was $60.7 million.  The Company’s asbestos liability represents the low end of the actuarially determined range of the undiscounted liability for settlement payments and awards of asbestos-related damages, excluding legal costs and any potential recovery from insurance carriers.

We identified the assessment of the asbestos liability recorded as a critical audit matter. This required subjective auditor judgment, due to the nature of the estimate and assumptions, including the applicability of those assumptions to the current facts and circumstances, as well as judgments about future events and uncertainties. Specialized skills were needed to evaluate the Company’s key assumptions. The key assumptions included future claim filings, closed with pay ratios, closed with pay lag patterns, settlement values, large claims, and ratios of allocated loss adjustment exposure (ALAE) to indemnity. Minor changes to these key assumptions could have had a significant effect on the Company’s assessment of the accrual for the asbestos liability.

The following are the primary procedures we performed to address this critical audit matter. We evaluated the design and tested the operating effectiveness of certain internal controls related to the asbestos liability estimation process. This included controls related to the key assumptions and the claims data utilized in the process, and the potential need for an updated actuarial valuation. We evaluated the asbestos related legal cases settled during the year and the number of open cases as of year-end by reading letters received directly from the Company’s external and internal legal counsel. We tested a selection of claims data used in the actuarial model by comparing the selection items to underlying claims documentation. We involved an actuarial professional with specialized skills and knowledge, who assisted in:

/s/ KPMG LLP

We have served as the Company’s auditor since 2010.

New York, New York
February 24, 2021

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

See accompanying notes to consolidated financial statements.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

See accompanying notes to consolidated financial statements.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

See accompanying notes to consolidated financial statements.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

See accompanying notes to consolidated financial statements.

STANDARD MOTOR PRODUCTS, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY

 

Years Ended December 31, 2020, 2019 and 2018