STONERIDGE INC - Annual Report: 2014 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2014

Commission file number: 001-13337

STONERIDGE, INC.

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

o Yes x No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

o Yes x No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. x Yes o No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

x Yes o No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).          

o Yes x No

As of June 30, 2014, the aggregate market value of the registrant’s Common Shares held by non-affiliates of the registrant was approximately $278.3 million. The closing price of the Common Shares on June 30, 2014 as reported on the New York Stock Exchange was $10.72 per share. As of June 30, 2014, the number of Common Shares outstanding was 28,243,997.

The number of Common Shares outstanding as of February 28, 2015 was 27,970,905.

DOCUMENTS INCORPORATED BY REFERENCE

Definitive Proxy Statement for the Annual Meeting of Shareholders to be held on May 12, 2015, into Part III, Items 10, 11, 12, 13 and 14.

INDEX

PART I

Item 1. Business.

Overview

Founded in 1965, Stoneridge, Inc. (the “Company”) is a global designer and manufacturer of highly engineered electrical and electronic components, modules and systems for the automotive, commercial, motorcycle, off-highway and agricultural vehicle markets. Our products and systems are critical elements in the management of mechanical and electrical systems to improve overall vehicle performance, convenience and monitoring in areas such as emissions control, fuel efficiency, safety, security and infotainment. Our extensive footprint encompasses 25 locations in 12 countries and enables us to supply global and regional automotive, commercial, motorcycle, off-highway and agricultural vehicle manufacturers around the world.

Our custom-engineered products and systems are used to activate equipment and accessories, monitor and display vehicle performance and control, distribute electrical power and signals and provide vehicle security and convenience. Our product offerings consist of (i) sensors, (ii) application-specific actuators, switches and valves (iii) vehicle and driver information systems, (iv) vehicle management electronics, (v) power and switch distribution modules and telematics, (vi) security alarms and vehicle tracking devices and monitoring services and (vii) convenience accessories. We supply the majority of our products, predominantly on a sole-source basis, to many of the world’s leading commercial vehicle and automotive original equipment manufacturers (“OEMs”), and select non-vehicle OEMs, as well as certain commercial vehicle and automotive tier one suppliers. These OEMs are increasingly utilizing electronic technology to comply with more stringent regulations (particularly emissions and safety) and to meet end-user demand for improved vehicle performance and greater convenience. As a result, per-vehicle electronic content has been increasing. Our technology and our partnership-oriented approach to product design and development enables us to develop next-generation products and to excel in the transition from mechanical-based components and systems to electrical and electronic components, modules and systems.

During the second quarter of 2014, the Company entered into an asset purchase agreement to divest its Wiring business including substantially all of its assets and liabilities. The sale was completed on August 1, 2014. The Wiring business is classified as discontinued operations for all periods presented in the Company’s financial statements herein, and therefore is excluded from both continuing operations and segment results for all periods presented. The Wiring business designed and manufactured wiring harness products and assembled instruments panels for sale principally to the commercial, agricultural and off-highway vehicle markets.

Segments and Products

We conduct our business in three reportable segments which are the same as our operating segments: Control Devices, Electronics and PST.

Control Devices. Our Control Devices segment designs and manufactures products that monitor, measure or activate specific functions within a vehicle. This segment includes product lines such as sensors, switches, valves and actuators. Sensor products are employed in major vehicle systems such as the emissions, safety, powertrain, braking, climate control, steering and suspension systems. Switches transmit signals that activate specific functions. Our switch technology is principally used in two capacities, user-activated and hidden. User-activated switches are used by a vehicle’s operator or passengers to manually activate headlights, rear defrosters and other accessories. Hidden switches are not typically visible to vehicle operators or passengers and are engaged to activate or deactivate selected functions as part of normal vehicle operations, such as brake lights. In addition, our Control Devices segment designs and manufactures electromechanical actuator products that enable OEMs to deploy power functions in a vehicle and can be designed to integrate switching and control functions. We sell these products principally to the automotive market as well as the commercial vehicle and agricultural markets.

Electronics. Our Electronics segment designs and manufactures electronic instrument clusters, electronic control units and driver information systems. These products collect, store and display vehicle information such as speed, pressure, maintenance data, trip information, operator performance, temperature, distance traveled and driver messages related to vehicle performance. In addition, power distribution modules and systems regulate, coordinate, monitor and direct the operation of the electrical system within a vehicle. These products use state-of-the-art hardware, software and multiplexing technology and are sold principally to the commercial vehicle market.

PST. Our PST segment, which primarily serves the South American market, specializes in the design, manufacture and sale of electronic vehicle security alarms, convenience accessories, vehicle tracking devices and monitoring services and in-vehicle audio and video devices primarily for the automotive and motorcycle industry. This segment includes product lines such as alarms, convenience applications, vehicle monitoring and tracking devices and infotainment systems. These products improve the performance, safety and convenience features of our customers’ vehicles. PST sells its products through the aftermarket distribution channel, to factory authorized dealer installers, also referred to as original equipment services, direct to OEMs and through mass merchandisers.

The following table sets forth for the periods indicated, the percentage of net sales attributable to our reportable segments and product categories for the years ended December 31:

Our products and systems are sold to numerous OEM and tier one supplier customers, in addition to aftermarket distributors and mass merchandisers, for use on many different vehicle platforms. We supply multiple parts to many of our principal OEM and tier one customers under requirements contracts for a particular vehicle model. These contracts range in duration from one year to the production life of the model, which commonly extends for three to seven years.

The following table sets forth for the periods indicated, the percentage of net sales derived from our principle end markets for the years ended December 31:

For further information related to our reportable segments and financial information about geographic areas, see Note 12 to the consolidated financial statements.

Production Materials

The principal production materials used in the manufacturing process for our reportable segments include: molded plastic components and resins, copper, precious metals and certain electrical components such as printed circuit boards, semiconductors, microprocessors, memory devices, resistors, capacitors, fuses, relays and infotainment devices. We purchase such materials pursuant to both annual contract and spot purchasing methods. Such materials are available from multiple sources, but we generally establish collaborative relationships with a qualified supplier for each of our key production materials in order to lower costs and enhance service and quality. As global demand for our production materials increases, we may have difficulties obtaining adequate production materials from our suppliers to satisfy our customers. Any extended period of time for which we cannot obtain adequate production material or which we experience an increase in the price of production material could materially affect our results of operations and financial condition.

Patents, Trademarks and Intellectual Property

We maintain and have pending various U.S. and foreign patents, trademarks and other rights to intellectual property relating to the reportable segments of our business, which we believe are appropriate to protect the Company's interests in existing products, new inventions, manufacturing processes and product developments. We do not believe any single patent is material to our business, nor would the expiration or invalidity of any patent have a material adverse effect on our business or ability to compete. We are not currently engaged in litigation related to material infringement claims other than one matter related to our Electronics segment which we believe is without merit. See additional details of the alleged patent infringement in Note 10 to the consolidated financial statements.

Industry Cyclicality and Seasonality

The markets for products in our reportable segments have been cyclical. Because these products are used principally in the production of vehicles for the automotive, commercial, motorcycle, off-highway and agricultural vehicle markets, revenues and therefore results of operations, are significantly dependent on the general state of the economy and other factors, like the impact of environmental regulations on our customers, which affect these markets. A decline in automotive, commercial, motorcycle, off-highway and agricultural vehicle production of our principal customers could adversely impact the Company. Seasonality has some impact on the operations of our Electronics and Control Devices segments. The demand for our PST segment consumer products is typically higher in the second half of the year, the fourth quarter in particular. 

Customers

We have several customers which account for a significant percentage of our sales. The loss of any significant portion of our sales to these customers, or the loss of a significant customer, would have a material adverse impact on our financial condition and results of operations. We supply numerous different parts to each of our principal customers. Contracts with several of our customers provide for supplying their requirements for a particular model, rather than for manufacturing a specific quantity of products. Such contracts range from one year to the life of the model, which is generally three to seven years. These contracts are subject to potential renegotiation from time to time, which may affect product pricing and generally may be terminated by our customers at any time. Therefore, the loss of a contract for a major model or a significant decrease in demand for certain key models or group of related models sold by any of our major customers could have a material adverse impact on the Company. We may also enter into contracts to supply parts, the introduction of which may then be delayed or cancelled. We also compete to supply products for successor models and are therefore subject to the risk that the customer will not select the Company to produce products on any such model, which could have a material adverse impact on our financial condition and results of operations. In addition, we sell products to other customers that are ultimately sold to our principal customers. Due to the competitive nature of the markets we serve, in the ordinary course of business we face pricing pressures from our customers. In response to these pricing pressures we have been able to effectively manage our production costs by the combination of lowering certain costs and limiting the increase of others, the net impact of which has not been material. However, if we are unable to effectively manage production costs in the future to mitigate future pricing pressures, our results of operations may be adversely affected.

The following table presents our principal customers, as a percentage of net sales:

Backlog

Our products are produced from readily available materials and have a relatively short manufacturing cycle; therefore our products are not on backlog status. Each of our production facilities maintains its own inventories and production schedules. Production capacity is adequate to handle current requirements and can be expanded to handle increased growth if needed.

Competition

The markets for our products in our reportable segments are highly competitive. The principal methods of competition are technological innovation, price, quality, performance, service and delivery. We compete for new business both at the beginning of the development of new models and upon the redesign of existing models for OEM customers. New model development generally begins two to five years before the marketing of such models to the public. Once a supplier has been selected to provide parts for a new program, an OEM customer will usually continue to purchase those parts from the selected supplier for the life of the program, although not necessarily for any model redesigns. We compete for aftermarket and mass merchandiser sales based on price, product functionality, quality and service.

Our diversity in products creates a wide range of competitors, which vary depending on both market and geographic location. We compete based on strong customer relations and a fast and flexible organization that develops technically effective solutions at or below target price. We compete against the following primary competitors:

Control Devices. Our primary competitors include BorgWarner, Inc., Bosch, Continental AG, Delphi Automotive PLC, Denso Corporation, Electricfil, Hella KGaA Hueck & Co., Measurement Specialties, Inc., NTK Technologies, Inc. and Sensata.

Electronics. Our primary competitors include Actia Group, Bosch, Continental AG, Delphi Automotive PLC, Dongfeng Electronics Technology Co., Ltd., Hella KGaA Hueck & Co., Magneti Marelli S.p.A. and Yazaki Corporation.

PST. Our primary competitors include Ceabs, Cerruns, Ituran, JVC/Kenwood Corporation, Lennox, M. Magneti Marelli S.p.A., MultiLaser, Quantum, Olimpus, Pioneer Corporation, Michelin and Sistec.

Product Development

Our research and development efforts for our reportable segments are largely product design and development oriented and consist primarily of applying known technologies to customer requests. We work closely with our customers to creatively solve customer requests using innovative approaches. The majority of our development expenses are related to customer-sponsored programs where we are involved in designing custom-engineered solutions for specific applications or for next generation technology. To further our vehicle platform penetration, we have also developed collaborative relationships with the design and engineering departments of key customers. These collaborative efforts have resulted in the development of new and complimentary products and the enhancement of existing products.

Our development work is largely performed on a decentralized basis. We have engineering and product development departments organized by market. To ensure knowledge sharing among decentralized development efforts, we have instituted a number of mechanisms and practices whereby innovation and best practices are shared. The decentralized product development operations are complimented by technology groups in Canton, Massachusetts; Lexington, Ohio; Stockholm, Sweden; Pune, India; Manaus, Brazil; São Paulo, Brazil; and Shanghai, China.

We use efficient and quality oriented work processes to address our customers’ high standards. Our product development technical resources include a full complement of computer-aided design and engineering (“CAD/CAE”) software systems, including (i) virtual three-dimensional modeling, (ii) functional simulation and analysis capabilities and (iii) data links for rapid prototyping. These CAD/CAE systems enable us to expedite product design and the manufacturing process to shorten the development time and ultimately time to market.

We have further strengthened our electrical engineering competencies through investment in equipment such as (i) automotive electro-magnetic compliance test chambers, (ii) programmable automotive and commercial vehicle transient generators, (iii) circuit simulators and (iv) other environmental test equipment. Additional investment in 3-D printing product machining equipment has allowed us to fabricate new product samples in a fraction of the time required historically. Our product development and validation efforts are supported by full service, on-site test labs at most manufacturing facilities, thus enabling cross-functional engineering teams to optimize the product, process and system performance before tooling initiation.

We have invested, and will continue to invest in technology to develop new products for our customers. Product development costs incurred in connection with the development of new products and manufacturing methods, to the extent not recoverable from the customer, are expensed as incurred. Such costs amounted to approximately $41.6 million, $40.4 million and $38.9 million for 2014, 2013 and 2012, respectively, or 6.3%, 6.1% and 6.4% of net sales for these periods.

We will continue shifting our investment spending toward the design and development of new products rather than focusing on sustaining existing product programs for specific customers, which allows us to sell our products to multiple customers. The typical product development process takes three to five years to show tangible results. As part of our effort to shift our investment spending, we reviewed our current product portfolio and adjusted our spending to either accelerate or eliminate our investment in these products based on our position in the market and the potential of the market and product.

Environmental and Other Regulations

Our operations are subject to various federal, state, local and foreign laws and regulations governing, among other things, emissions to air, discharge to water and the generation, handling, storage, transportation, treatment and disposal of waste and other materials. We believe that our business, operations and facilities have been and are being operated in compliance, in all material respects, with applicable environmental and health and safety laws and regulations, many of which provide for substantial fines and criminal sanctions for violations.

Employees

As of December 31, 2014, we had approximately 4,200 employees, approximately 66% of whom were located outside the United States. Although we have no collective bargaining agreements covering U.S. employees, a significant number of employees located in Brazil, Estonia, France, Mexico, Spain, Sweden, and the United Kingdom either (i) are represented by a union and are covered by a collective bargaining agreement or (ii) are covered by works council or other employment arrangements required by law. We believe that relations with our employees are good.

Equity Investments and Joint Ventures

We make equity investments and form joint ventures in order to achieve several strategic objectives, including (i) diversifying our business by expanding in high-growth regions, (ii) employing complementary design processes, growth technologies and intellectual capital and (iii) realizing cost savings from combined sourcing.

We had a joint venture in Brazil, PST Eletrônica Ltda. (“PST”), which is now a consolidated subsidiary, and have an equity investment in India, Minda Stoneridge Instruments Ltd. (“Minda”), and continue to explore similar business opportunities in other global markets. As of and for the years ended December 31, 2014, 2013 and 2012, our controlling interest in PST was 74% and our interest in Minda was 49%.

We entered into our PST joint venture in October 1997, acquiring a 50% interest. On December 31, 2011, we acquired an additional 24% interest. Prior to the acquisition of the additional interest, PST was accounted for using the equity method of accounting. Subsequent to the acquisition of controlling interest, PST became a consolidated subsidiary of the Company. We entered into our Minda joint venture in August 2004 and increased our investment from 20% to 49% in 2006, this investment is accounted for using the equity method of accounting.

PST specializes in the design, manufacture and sale of electronic vehicle security alarms, convenience accessories, vehicle tracking devices and monitoring services and in-vehicle audio and video devices. PST sells its products through the aftermarket distribution channel, to factory authorized dealer installers, also referred to as original equipment services, direct to OEMs and through mass merchandisers. PST’s sales are to customers in South America.

Minda manufactures electromechanical/electronic instrumentation equipment and sensors primarily for the automotive, motorcycle and commercial vehicle markets. We leverage our investment in Minda by sharing our knowledge and expertise in electrical components and systems and expanding Minda’s product offering through the joint development of our products designed for the market in India.

Executive Officers of the Company

Each executive officer of the Company serves the Board of Directors at its pleasure. The Board of Directors appoints corporate officers annually. The executive officers for reporting purposes under the Securities and Exchange Act of 1934, as amended, of the Company are as follows:

John C. Corey, President, Chief Executive Officer and Director. Mr. Corey has served as President and Chief Executive Officer since January 2006. Mr. Corey has served as a Director on the Board of Directors since January 2004. Prior to his employment with the Company, Mr. Corey served from October 2000, as President and Chief Executive Officer and Director of Safety Components International, a supplier of airbags and components, with worldwide operations. Mr. Corey has served as a Director and Chairman of the Board of Haynes International, Inc., a producer of metal alloys, since 2004.

George E. Strickler, Executive Vice President, Chief Financial Officer and Treasurer. Mr. Strickler has served as Executive Vice President and Chief Financial Officer since joining the Company in January 2006. Mr. Strickler was appointed Treasurer of the Company in February 2007. Prior to his employment with the Company, Mr. Strickler served as Executive Vice President and Chief Financial Officer for Republic Engineered Products, Inc. (“Republic”), from February 2004 to January 2006. Mr. Strickler has served as a director, Vice Chairman of the Board and Chairman of the Audit Committee of TCP International Holdings Ltd., a manufacturer and distributor of energy efficient lighting technologies, since 2014.

Richard P. Adante, Vice President of Operations. Mr. Adante has served as Vice President of Operations since May 2011. From November 2009 until his appointment at Stoneridge, Mr. Adante was consulting through his personal consulting firm, RMA Management Consultants. From July 2006 to November 2009, Mr. Adante served as the President of Hawthorn Manufacturing, now known as Crowne Group.

Thomas A. Beaver, Vice President of the Company and President of Global Sales. Mr. Beaver has served as Vice President of the Company and President of Global Sales since May 2012. Prior to that, Mr. Beaver served as Vice President of the Company and Vice President of Global Sales and Systems Engineering from January 2005 to May 2012. From January 2000 to January 2005, Mr. Beaver served as Vice President of Stoneridge Sales and Marketing.

Sergio de Cerqueira Leite, Director President of PST Eletrônica Ltda. Mr. Leite is a founding partner of PST. He has held the Director President position since 1997.

Charles A. Di Staulo, Vice President of Human Resources. Mr. Di Staulo has served as Vice President of Human Resources since joining the Company in March 2013.  From November 2008 until his employment with the Company, Mr. Di Staulo served as Vice President of Human Resources for the North America Division of Tarkett. 

Peter Kruk, President of the Electronics Division. Mr. Kruk has served as President of the Electronics Division since August 2012. Mr. Kruk joined the Company in October 2009 as the Managing Director of Stoneridge Electronics – Europe. Prior to that, he served as President of HEXPOL Wheels and Managing Director of Stellana AB from 2007 to 2009.

Michael D. Sloan, Vice President of the Company and President of the Control Devices Division. Mr. Sloan has served as President of the Control Devices Division since July 2009 and Vice President of the Company since December 2009. Prior to that, Mr. Sloan served as Vice President and General Manager of Stoneridge Hi-Stat from February 2004 to July 2009.

Available Information

We make available, free of charge through our website (www.stoneridge.com), our Annual Report on Form 10-K (“Annual Report”), Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, all amendments to those reports, and other filings with the U.S. Securities and Exchange Commission (“SEC”), as soon as reasonably practicable after they are filed with the SEC. Our Corporate Governance Guidelines, Code of Business Conduct and Ethics, Code of Ethics for Senior Financial Officers, Whistleblower Policy and Procedures and the charters of the Board of Director’s Audit, Compensation and Nominating and Corporate Governance Committees are posted on our website as well. Copies of these documents will be available to any shareholder upon request. Requests should be directed in writing to Investor Relations at Stoneridge, Inc., 9400 East Market Street, Warren, Ohio 44484.

The SEC maintains a website (www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including the Company. The public may also read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F. Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.

Item 1A. Risk Factors.

Our business is cyclical and seasonal in nature and downturns in the automotive, commercial, motorcycle, off-highway and agricultural vehicle markets could reduce the sales and profitability of our business.

The demand for products in our Control Devices and Electronics segments are largely dependent on the domestic and foreign production of automotive, commercial, motorcycle, off-highway and agricultural vehicles. The markets for our products have been cyclical, because new vehicle demand is dependent on, among other things, consumer spending and is tied closely to the overall strength of the economy. Because the majority of our products are used principally in the production of vehicles for the automotive, commercial, motorcycle, off-highway and agricultural vehicle markets, our net sales, and therefore our results of operations, are significantly dependent on the general state of the economy and other factors which affect these markets. A decline in commercial, automotive, agricultural, motorcycle and off-highway vehicle production, or a material decline in market share by our significant customers, could adversely impact our results of operations and financial condition. Also, the demand for our PST segment products are significantly dependent on the general state of the Brazilian economy and automotive market.

In 2014, approximately 79% of our net sales were derived from automotive, commercial, motorcycle, off-highway and agricultural vehicle markets while approximately 21% were derived from aftermarket distributors, mass merchandisers and monitoring services markets.

We have foreign currency translation and transaction risks that may materially adversely affect our operating results, financial condition and liquidity.

The financial position and results of operations of our international subsidiaries are initially recorded in various foreign currencies and then translated into U.S. dollars at the applicable exchange rate for inclusion in our consolidated financial statements. The strengthening of the U.S. dollar against these foreign currencies ordinarily has a negative effect on our reported sales and operating margin (and conversely, the weakening of the U.S. dollar against these foreign currencies has a positive impact). The volatility of currency exchange rates may materially adversely affect our operating results.

We are subject to risks related to our international operations.

Approximately 50.0% of our net sales in 2014 were derived from sales outside of North America. At December 31, 2014, significant concentrations of net assets outside of North America included $87.0 million in South America and $69.4 million in Europe and Other. Non-current assets outside of North America accounted for approximately 65.1% of our non-current assets as of December 31, 2014. International sales and operations are subject to significant risks, including, among others:

We may not realize sales represented by awarded business.

We base our growth projections, in part, on business awards made by our customers. These business awards generally renew annually during a program life cycle. Failure of actual production orders from our customers to approximate these business awards could have a material adverse effect on our business, financial condition or results of operations.

The prices that we can charge some of our customers are predetermined and we bear the risk of costs in excess of our estimates, in addition to the risk of adverse effects resulting from general customer demands for cost reductions and quality improvements.

Our supply agreements with some of our customers require us to provide our products at predetermined prices. In some cases, these prices decline over the course of the contract and may require us to meet certain productivity and cost reduction targets. In addition, our customers may require us to share productivity savings in excess of our cost reduction targets. The costs that we incur in fulfilling these contracts may vary substantially from our initial estimates. Unanticipated cost increases or the inability to meet certain cost reduction targets may occur as a result of several factors, including increases in the costs of labor, components or materials. In some cases, we are permitted to pass on to our customers the cost increases associated with specific materials. Cost overruns that we cannot pass on to our customers could adversely affect our business, financial condition or results of operations.

OEM customers have exerted considerable pressure on component suppliers to reduce costs, improve quality and provide additional design and engineering capabilities and continue to demand and receive price reductions and measurable increases in quality through their use of competitive selection processes, rating programs and various other arrangements. We may be unable to generate sufficient production cost savings in the future to offset required price reductions. Additionally, OEMs have generally required component suppliers to provide more design engineering input at earlier stages of the product development process, the costs of which have, in some cases, been absorbed by the suppliers. Future price reductions, increased quality standards and additional engineering capabilities required by OEMs may reduce our profitability and have a material adverse effect on our business, financial condition or results of operations.

Our business is very competitive and increased competition could reduce our sales and profitability.

The markets for our products are highly competitive. We compete based on quality, service, price, performance, timely delivery and technological innovation. Many of our competitors are more diversified and have greater financial and other resources than we do. In addition, with respect to certain products, some of our competitors are divisions of our OEM customers. We cannot assure that our business will not be adversely affected by competition or that we will be able to maintain our profitability if the competitive environment changes.

The loss or insolvency of any of our major customers would adversely affect our future results.

We are dependent on several principal customers for a significant percentage of our net sales. In 2014, our top three customers were Ford Motor Company, Scania Group and Daimler which comprised 11%, 8% and 6% of our net sales, respectively. In 2014, our top ten customers accounted for 48% of our net sales. The loss of any significant portion of our sales to these customers would have a material adverse effect on our results of operations and financial condition. The contracts we have entered into with many of our customers provide for supplying the customers’ requirements for a particular model, rather than for manufacturing a specific quantity of products. Such contracts range from one year to the life of the model, which is generally three to seven years. These contracts are subject to renegotiation, which may affect product pricing and generally may be terminated by our customers at any time. Therefore, the loss of a contract for a major model or a significant decrease in demand for certain key models or any group of related models sold by any of our major customers could have a material adverse effect on our results of operations and financial condition by reducing cash flows and our ability to spread costs over a larger revenue base. We also compete to supply products for successor models and are subject to the risk that the customer will not select us to produce products on any such model, which could have a material adverse impact on our business, financial condition or results of operations. In addition, we have significant receivable balances related to these customers and other major customers that would be at risk in the event of their bankruptcy.

Consolidation among vehicle parts customers and suppliers could make it more difficult for us to compete successfully.

The vehicle part supply industry has undergone a significant consolidation as OEM customers have sought to lower costs, improve quality and increasingly purchase complete systems and modules rather than separate components. As a result of the cost focus of these major customers, we have been, and expect to continue to be, required to reduce prices. Because of these competitive pressures, we cannot assure you that we will be able to increase or maintain gross margins on product sales to our customers. The trend toward consolidation among vehicle parts suppliers is resulting in fewer, larger suppliers who benefit from purchasing and distribution economies of scale. If we cannot achieve cost savings and operational improvements sufficient to allow us to compete successfully in the future with these larger, consolidated companies, our business, financial condition or results of operations could be adversely affected.

We rely on independent dealers and distributors to sell certain products in the aftermarket sales channel and a disruption to this channel would harm our business.

Because we sell certain products such as security accessories and driver information products to independent dealers and distributors, we are subject to many risks, including risks related to their inventory levels and support for our products. If dealers and distributors do not maintain sufficient inventory levels to meet customer demand, our sales could be negatively impacted.

Our dealer network also sells products offered by our competitors. If our competitors offer our dealers more favorable terms, those dealers may de-emphasize or decline to carry our products. In the future, we may not be able to retain or attract a sufficient number of qualified dealers and distributors. If we are unable to maintain successful relationships with dealers and distributors, or to expand our distribution channels, our business will suffer.

We are dependent on the availability and price of raw materials and other supplies.

We require substantial amounts of raw materials and other supplies, and substantially all such materials we require are purchased from outside sources. The availability and prices of raw materials and other supplies may be subject to curtailment or change due to, among other things, new laws or regulations, suppliers’ allocations to other purchasers and interruptions in production by suppliers, weather emergencies, natural disasters, commercial disputes, acts of terrorism or war, changes in exchange rates and worldwide price levels. As demand for raw materials and other supplies increases as a result of a recovering economy, we may have difficulties obtaining adequate raw materials and other supplies from our suppliers to satisfy our customers. At times, we have experienced difficulty obtaining adequate supplies of semiconductors and memory chips for our Control Devices, Electronics and PST segments. In addition, there have been challenges at times in obtaining timely supply of nylon and resins for our Control Devices segment and audio component parts for our PST segment. If we cannot obtain adequate raw materials and other supplies, or if we experience an increase in the price of raw materials and other supplies, our business, financial condition or results of operations could be materially adversely affected.

We use a variety of commodities, including copper, zinc, resins and certain other commodities. Increasing commodity costs could have a negative impact on our results. We have sought to alleviate the effect of increasing costs by including a material pass-through provision in our customer contracts whenever possible, and at times by selectively hedging a portion of our exposure. The inability to pass-through increasing commodity costs or effectively hedge them may have a material adverse effect on our business, financial condition or results of operations.

We must implement and sustain a competitive technological advantage in producing our products to compete effectively.

Our products are subject to changing technology, which could place us at a competitive disadvantage relative to alternative products introduced by competitors. Our success will depend on our ability to continue to meet customers’ changing specifications with respect to quality, service, price, timely delivery and technological innovation by implementing and sustaining competitive technological advances. Our business may, therefore, require significant recurring additional capital expenditures and investment in product development and manufacturing and management information systems. We cannot assure that we will be able to achieve the technological advances or introduce new products that may be necessary to remain competitive. Our inability to continuously improve existing products, to develop new products and to achieve technological advances could have a material adverse effect on our business, financial condition or results of operations.

PST’s Global Positioning Systems (“GPS”) products depend upon satellites maintained by the United States Department of Defense. If a significant number of these satellites become inoperable, unavailable or are not replaced, or if the policies of the United States government for the use of the GPS without charge are changed, our business will suffer.

The GPS is a satellite-based navigation and positioning system consisting of a constellation of orbiting satellites. The satellites and their ground control and monitoring stations are maintained and operated by the United States Department of Defense. The Department of Defense does not currently charge users for access to the satellite signals. These satellites and their ground support systems are complex electronic systems subject to electronic and mechanical failures and possible sabotage. The satellites were originally designed to have lives of seven and a half years and are subject to damage by the hostile space environment in which they operate. However, of the current deployment of satellites in place, the average age is six years.

If a significant number of satellites were to become inoperable, unavailable or are not replaced, it would impair the current utility of our GPS products and the growth of market opportunities. In addition, there can be no assurance that the U.S. government will remain committed to the operation and maintenance of GPS satellites over a long period, or that the policies of the U.S. government that provide for the use of the GPS without charge and without accuracy degradation will remain unchanged. Because of the increasing commercial applications of the GPS, other U.S. government agencies may become involved in the administration or the regulation of the use of GPS signals. Any of the foregoing factors could affect the willingness of buyers of our products to select GPS-based products instead of products based on competing technologies, which could adversely affect our operational revenues and our financial condition.

We may incur material product liability costs.

We may be subject to product liability claims in the event that the failure of any of our products results in personal injury or death and we cannot assure that we will not experience material product liability losses in the future. We cannot assure that our product liability insurance will be adequate for liabilities ultimately incurred or that it will continue to be available on terms acceptable to us. In addition, if any of our products prove to be defective, we may be required to participate in government-imposed or customer OEM-instituted recalls involving such products. A successful claim brought against us that exceeds available insurance coverage or a requirement to participate in any product recall could have a material adverse effect on our business, financial condition or results of operations.

Increased or unexpected product warranty claims could adversely affect us.

We typically provide our customers a warranty covering workmanship, and in some cases materials, on products we manufacture. Our warranty generally provides that products will be free from defects and adhere to customer specifications. If a product fails to comply with the warranty, we may be obligated or compelled, at our expense, to correct any defect by repairing or replacing the defective product. We maintain warranty reserves in an amount based on historical trends of units sold and payment amounts, combined with our current understanding of the status of existing claims. To estimate the warranty reserves, we must forecast the resolution of existing claims, as well as expected future claims on products previously sold. The amounts estimated to be due and payable could differ materially from what we may ultimately be required to pay. An increase in the rate of warranty claims or the occurrence of unexpected warranty claims could have a material adverse effect on our customer relations and our financial condition or results of operations.

If we fail to protect our intellectual property rights or maintain our rights to use licensed intellectual property or are found liable for infringing the rights of others, our business could be adversely affected.

Our intellectual property, including our patents, trademarks, copyrights, trade secrets and license agreements, are important in the operation of our businesses, and we rely on the patent, trademark, copyright and trade secret laws of the United States and other countries, as well as nondisclosure agreements, to protect our intellectual property rights. We may not, however, be able to prevent third parties from infringing, misappropriating or otherwise violating our intellectual property, breaching any nondisclosure agreements with us, or independently developing technology that is similar or superior to ours and not covered by our intellectual property. Any of the foregoing could reduce any competitive advantage we have developed, cause us to lose sales or otherwise harm our business. We cannot assure that any intellectual property will provide us with any competitive advantage or will not be challenged, rejected, cancelled, invalidated or declared unenforceable. In the case of pending patent applications, we may not be successful in securing issued patents, or securing patents that provide us with a competitive advantage for our businesses. In addition, our competitors may design products around our patents that avoid infringement and violation of our intellectual property rights.

We cannot be certain that we have rights to use all intellectual property used in the conduct of our businesses or that we have complied with the terms of agreements by which we acquire such rights, which could expose us to infringement, misappropriation or other claims alleging violations of third party intellectual property rights. Third parties have asserted and may assert or prosecute infringement claims against us in connection with the services and products that we offer, and we may or may not be able to successfully defend these claims. Litigation, either to enforce our intellectual property rights or to defend against claims regarding intellectual property rights of others, could result in substantial costs and a diversion of our resources. Any such claims and resulting litigation could require us to enter into licensing agreements (if available on acceptable terms or at all), pay damages and cease making or selling certain products and could result in a loss of our intellectual property protection. Moreover, we may need to redesign some of our products to avoid future infringement liability. We also may be required to indemnify customers or other third parties at significant expense in connection with such claims and actions. Any of the foregoing could have a material adverse effect on our business, financial condition or results of operations.

Disruptions in the financial markets could adversely impact the availability and cost of credit which could negatively affect our business.

Our revolving credit facility (the “Credit Facility”) contains a base borrowing level of $300.0 million which can be increased by $80.0 million upon the satisfaction of certain conditions. The Credit Facility is scheduled to expire on September 12, 2019. Disruptions in the financial markets, including the bankruptcy, insolvency or restructuring of certain financial institutions, and the general lack of liquidity may adversely impact the availability and cost of credit. We may be required to refinance the Credit Facility at terms and rates that are less favorable than our current terms and rates, which could adversely affect our business, financial condition or results of operations.

Our debt obligations could limit our flexibility in managing our business and expose us to risks.

As of December 31, 2014, there was $100.0 million in borrowings outstanding on our Credit Facility. In addition, we are permitted under our Credit Facility to incur additional debt, subject to specified limitations. Our leverage and the terms of our indebtedness may have important consequences including the following:

These and other consequences of our substantial leverage and the terms of our indebtedness could have a material adverse effect on our business, financial condition or results of operations.

Covenants in our Credit Facility may limit our ability to pursue our business strategies.

Our Credit Facility limits our ability to, among other things:

The agreement governing our Credit Facility requires us to maintain a maximum leverage ratio of 3.00 to 1.00, and a minimum interest coverage ratio of 3.50 to 1.00 and places a maximum annual limit on capital expenditures. Our ability to comply with these covenants as well as the restrictive covenants under the terms of our indebtedness, may be affected by events beyond our control.

A breach of any of the restrictive covenants under our indebtedness or our inability to comply with the leverage and interest ratio requirements in the Credit Facility could result in a default under the agreement governing the Credit Facility. If a default occurs, the lenders under the Credit Facility could elect to declare all outstanding borrowings, together with accrued interest and other fees, to be immediately due and payable and terminate any commitments they have to provide further borrowings, and the Credit Facility lenders could pursue foreclosure and other remedies against us and our assets.

We may not be able to generate sufficient cash flows to meet our debt service obligations.

Our ability to make scheduled payments on, or to refinance, our obligations with respect to our indebtedness will depend on our financial and operating performance, which in turn will be affected by general economic conditions and by financial, competitive, regulatory and other factors beyond our control. We cannot assure that our business will generate sufficient cash flow from operations or that future sources of capital will be available to us in an amount sufficient to enable us to service our indebtedness or to fund our other liquidity needs. If we are unable to generate sufficient cash flow to satisfy our debt obligations, we may have to undertake alternative financing plans, such as refinancing or restructuring our debt, selling assets, reducing or delaying capital investments or seeking to raise additional capital. We cannot assure you that any refinancing would be possible, that any assets could be sold or, if sold, of the timing of the sales and the amount of proceeds that may be realized from those sales, or that additional financing could be obtained on acceptable terms, if at all. Our inability to generate sufficient cash flows to satisfy our debt obligations, or to refinance our indebtedness on commercially reasonable terms, could materially and adversely affect our business, financial condition and results of operations.

If we cannot make scheduled payments on our debt, we will be in default and, as a result, the lenders under our Credit Facility could terminate their commitments to lend us money and could foreclose on or exercise other remedies against the assets securing the borrowings under our Credit Facility and we could be forced into bankruptcy, liquidation or other insolvency proceedings, which, in each case, could result in a loss in the value of our Common Shares.

Our physical properties and information systems are subject to damage as a result of disasters, outages or similar events.

Our offices and facilities, including those used for design and development, material procurement, manufacturing, logistics and sales are located throughout the world and are subject to possible destruction, temporary stoppage or disruption as a result of any number of unexpected events. If any of these facilities or offices was to experience a significant loss as a result of any of the above events, it could disrupt our operations, delay production, shipments and revenue, and result in large costs to repair or replace these facilities or offices.

In addition, network and information system shutdowns caused by unforeseen events such as power outages, disasters, hardware or software defects, computer viruses and computer security violations pose increasing risks. Such an event could also result in the disruption of our operations, delay production, shipments and revenue, and result in large expenditures necessary to repair or replace such network and information systems.

We may experience increased costs and other disruptions to our business associated with labor relations.

As of December 31, 2014, we had approximately 4,200 employees, approximately 66% of whom were located outside the United States. Although we have no collective bargaining agreements covering U.S. employees, a significant number of employees located in Brazil, Estonia, France, Mexico, Spain, Sweden and the United Kingdom either (i) are represented by a union and are covered by a collective bargaining agreement or (ii) are covered by works council or other employment arrangements required by law. We cannot assure you that other employees will not be represented by a labor organization in the future or that any of our facilities will not experience a work stoppage or other labor disruption. Any work stoppage or other labor disruption involving our employees, employees of our customers (many of which customers have employees who are represented by unions), or employees of our suppliers could have a material adverse effect on our business, financial condition or results of operations by disrupting our ability to manufacture our products or reducing the demand for our products.

Compliance with environmental and other governmental regulations could be costly and require us to make significant expenditures.

Our operations are subject to various federal, state, local and foreign laws and regulations governing, among other things:

Our business, operations and facilities are subject to environmental and health and safety laws and regulations, many of which provide for substantial fines for violations. The operation of our manufacturing facilities entails risks and we cannot assure you that we will not incur material costs or liabilities in connection with these operations. In addition, potentially significant expenditures could be required in order to comply with evolving environmental, health and safety laws, regulations or requirements that may be adopted or imposed in the future. Changes in environmental, health and safety laws, regulations and requirements or other governmental regulations could increase our cost of doing business or adversely affect the demand for our products.

We also may be required to investigate or clean up contamination resulting from past or current uses of our properties. At our former Sarasota, Florida, facility, for example, groundwater and soil contamination caused by operations before we acquired the facility will require future cleanup. The costs of such remediation could have a material adverse effect on our business, financial condition or results of operations. Although no other environmental matters have been identified, other matters involving environmental contamination may also have a material adverse effect on our business, financial condition or results of operations.

Our annual effective tax rate could be volatile and materially change as a result of changes in the mix of earnings and other factors.

Our overall effective tax rate is equal to our total tax expense as a percentage of our total earnings before tax. However, tax expense and benefits are not recognized on a global basis, but rather on a jurisdictional or legal entity basis. Losses in certain jurisdictions may not provide a current financial statement tax benefit. As a result, changes in the mix of earnings between jurisdictions, among other factors, could have a significant effect on our overall effective tax rate.

We may not be able to successfully integrate acquisitions into our business or may otherwise be unable to benefit from pursuing acquisitions.

Failure to successfully identify, complete and/or integrate acquisitions could have a material adverse effect on us. A portion of our growth in sales and earnings has been generated from acquisitions and subsequent improvements in the performance of the businesses acquired. We expect to continue a strategy of selectively identifying and acquiring businesses with complementary products. We cannot assure you that any business acquired by us will be successfully integrated with our operations or prove to be profitable. We could incur substantial indebtedness in connection with our acquisition strategy, which could significantly increase our interest expense. Covenant restrictions relating to such indebtedness could restrict our ability to pay dividends, fund capital expenditures and consummate additional acquisitions.

We anticipate that acquisitions could occur in geographic markets, including foreign markets, in which we do not currently operate. As a result, the process of integrating acquired operations into our existing operations may result in unforeseen operating difficulties and may require significant financial resources that would otherwise be available for the ongoing development or expansion of existing operations. Any failure to successfully integrate such acquisitions could have a material adverse effect on our business, financial condition or results of operations.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

The Company and its joint venture currently own or lease ten manufacturing facilities that are in use, which together contain approximately 1.0 million square feet of manufacturing space. Of these manufacturing facilities, four are used by our Control Devices reportable segment, three are used by our Electronics reportable segment, two are used by our PST reportable segment and one is used by our equity investment, Minda. The following table provides information regarding our facilities:

(A) This facility is also used in the Electronics reportable segment.

(B) This facility is also used in the Control Devices reportable segment.

Item 3. Legal Proceedings.

We are involved in certain legal actions and claims arising in the ordinary course of business. Although it is not possible to predict with certainty the outcome of these matters, we do not believe that any of the litigation in which we are currently engaged, either individually or in the aggregate, will have a material adverse effect on our business, consolidated financial position or results of operations. We are subject to a tax assessment in Brazil related to value added taxes on vehicle tracking and monitoring services for which the likelihood of loss is not probable although it may take years to resolve. We are also subject to litigation regarding patent infringement. We are also subject to the risk of exposure to product liability claims in the event that the failure of any of our products causes personal injury or death to users of our products and there can be no assurance that we will not experience any material product liability losses in the future. In addition, if any of our products prove to be defective, we may be required to participate in a government-imposed or customer OEM-instituted recall involving such products. See additional details of these matters in Note 10 to the consolidated financial statements.

Item 4. Mine Safety Disclosure.

Not Applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Our shares are listed on the New York Stock Exchange (“NYSE”) under the symbol “SRI.” As of February 28, 2015, we had 27,970,905 Common Shares, without par value, outstanding which were owned by approximately 300 registered holders, including Common Shares held in the names of brokers and banks (so-called “street name” holdings) who are record holders with approximately 2,200 beneficial owners.

The Company has not historically paid or declared dividends, which are restricted under the Credit Facility on our Common Shares such that we may only pay cash dividends in the future of up to $7.0 million annually if immediately prior to and immediately after the payment is made, no event of default under our Credit Facility shall have occurred. We currently intend to retain our earnings for acquisitions, working capital, capital expenditures, general corporate purposes and reduction in outstanding indebtedness. Accordingly, we do not expect to pay cash dividends in the foreseeable future.

High and low sales prices for our Common Shares for each quarter ended during 2014 and 2013 are as follows:

There were no repurchases of Common Shares made by us during the years ended December 31, 2014 or 2013, other than the repurchase of Common Shares to satisfy employee tax withholdings.

Performance Graph

Set forth below is a line graph comparing the cumulative total return of a hypothetical investment in our Common Shares with the cumulative total return of hypothetical investments in the Morningstar Auto Parts Industry Group Index and the NYSE Composite Index based on the respective market price of each investment as of December 31, 2009, 2010, 2011, 2012, 2013 and 2014 assuming in each case an initial investment of $100 on December 31, 2009, and reinvestment of dividends.

For information on “Related Stockholder Matters” required by Item 201(d) of Regulation S-K, refer to Item 12 of this report.

Item 6. Selected Financial Data.

The following table sets forth selected historical financial data and should be read in conjunction with the consolidated financial statements and notes related thereto and other financial information included elsewhere herein. The selected historical data was derived from our consolidated financial statements.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Background

We are a global designer and manufacturer of highly engineered electrical and electronic components, modules and systems for the automotive, commercial, motorcycle, off-highway and agricultural vehicle markets.

Segments

We are primarily organized by products produced and markets served. Under this structure, our operations have been reported utilizing the following segments:

Control Devices. This segment includes results of operations that manufacture sensors, switches, valves and actuators.

Electronics. This segment includes results of operations from the production of electronic instrument clusters, electronic control units and driver information systems.

PST. This segment includes results of operations that design and manufacture electronic vehicle alarms, convenience accessories, vehicle tracking devices and monitoring services and in-vehicle audio and video devices.

During the second quarter of 2014 we entered into an asset purchase agreement to divest our Wiring business, which designed and manufactured wiring harness products and assembled instrument panels principally for the commercial, agricultural and off-highway vehicle markets. On August 1, 2014, we completed the sale of substantially all of the assets and liabilities of the Wiring business. As a result of the sale, this business is classified as discontinued operations in our consolidated financial statements and no discussion and analysis of financial condition and results of operations is provided herein.

Overview

The Company had a loss from continuing operations attributable to Stoneridge, Inc. of $(37.7) million, or $(1.40) per diluted share and a loss from discontinued operations attributable to Stoneridge, Inc. of $(9.4) million, or $(0.35) per diluted share resulting in a net loss attributable to Stoneridge, Inc. of $(47.1) million, or $(1.75) per diluted share for the year ended December 31, 2014.

Loss from continuing operations attributable to Stoneridge. Inc. of $(37.7) million, or $(1.40) per diluted share for the year ended December 31, 2014 decreased by $56.9 million, or $2.10 per diluted share from income from continuing operations of $19.2 million, or $0.70 per diluted share for the year ended December 31, 2013 primarily due to a goodwill impairment charge of $40.2 million (net of $11.3 million attributable to noncontrolling interest) related to our PST segment and loss on extinguishment of debt of $10.6 million, which had an aggregate negative impact of $50.8 million, or $1.89 per share attributable to Stoneridge, Inc.

The Company recorded goodwill impairment related to our PST segment during 2014 based on a significant decrease in our future sales and earnings growth expectations resulting from lower forecasted growth in the Brazilian economy and automotive market and a decline in PST’s operating performance in 2014. Also, the Company redeemed all $175.0 million of the 9.5% senior notes at a premium of $8.0 million in the late third and early fourth quarter of 2014 resulting in a debt extinguishment net loss of $10.6 million. The senior notes were redeemed using borrowings under our amended revolving credit facility (the “Credit Facility”), proceeds from the Wiring business sale and existing cash.

Net sales increased by $1.1 million, or 0.2%, primarily due to higher sales in our Electronics and Control Devices segments totaling $39.8 million during 2014 compared to 2013 which were substantially offset by lower product sales volume and unfavorable foreign currency translation totaling $38.7 million at our PST segment.

Loss from discontinued operations related to the Wiring business was $(9.4) million, or $(0.35) per diluted share for the year ended December 31, 2014, a $5.4 million, or $0.21 per diluted share increase from loss from discontinued operations of $(4.0) million, or $(0.14) per diluted share for 2013. The increase was primarily due to the after-tax loss on disposal of the Wiring business of $(8.6) million.

At December 31, 2014 and 2013, we had cash and cash equivalents of $43.0 million and $62.8 million, respectively. The decrease during 2014 was primarily due to the fact that cash was used to partially fund the redemption of the 9.5% senior secured notes. At December 31, 2014 we had $100.0 million in borrowings outstanding on our Credit Facility.

Outlook

The North American automotive vehicle market production is forecasted to be in the range of 17.0 million to 17.4 million units in 2015, which is an increase from the 17.0 million units produced in 2014. The improvement in the North American automotive vehicle market and sales of new products had a favorable effect on our Control Devices segment’s results during 2014 which we expect will continue into 2015.

The North American commercial vehicle market improved in 2014, which is forecasted to continue in 2015 and is expected to have a favorable impact on our Control Devices and Electronics segments.

While the European commercial vehicle market declined in 2014, it is forecasted to have modest improvement in 2015 which is expected to have a favorable impact on our Electronics segment.

Our PST segment revenues and operating performance declined in 2014 compared to 2013 due to a significant weakening of the Brazilian economy and automotive market. The International Monetary Fund (IMF) forecasts the Brazil gross domestic product to grow only 0.3% and 1.5% in 2015 and 2016, respectively. Based on the decline in PST’s sales and operating performance in 2014 and lower forecasted growth of the Brazilian economy, PST’s sales and earnings growth expectations have been significantly reduced. Since there is significant uncertainty regarding the timing and magnitude of the recovery in the Brazilian economy and automotive market, PST will continue to realign its cost structure to mitigate the impact on earnings of possible continued weakened product demand and unfavorable foreign currency exchange rates in 2015.

Due to the competitive nature of the markets we serve, in the ordinary course of business we face pricing pressures from our customers. In response to these pricing pressures we have been able to effectively manage our production costs by the combination of lowering certain costs and limiting the increase of others, the net impact of which has not been material. However, if we are unable to effectively manage production costs in the future to mitigate future pricing pressures, our results of operations would be adversely affected.

Year Ended December 31, 2014 Compared To Year Ended December 31, 2013

Consolidated statements of operations as a percentage of net sales are presented in the following table (in thousands):

Net Sales. Net sales for our reportable segments, excluding inter-segment sales are summarized in the following table (in thousands):

Our Control Devices segment net sales increased due to higher volume primarily in our North American automotive and commercial vehicle markets of $13.6 million and $2.7 million, respectively, during 2014 when compared to 2013.

Our Electronics segment net sales increased primarily due to higher sales of our European and North American commercial vehicle products each of which increased by $15.6 million. This was a result of higher volume including post-disposition sales to the Wiring business acquired by Motherson of $12.2 million and new product sales for 2014 when compared to 2013. These increases were partially offset by an unfavorable change in foreign currency translation which reduced sales by approximately $7.0 million, or 4.0%.

Our PST segment net sales decreased during 2014 compared to the same period in 2013 due to lower product volume in its OEM, audio and aftermarket channels resulting from weakness in the Brazilian economy and automotive market as well as an unfavorable change in foreign currency translation which reduced sales by approximately $12.7 million, or 7.1%.

Net sales by geographic location are summarized in the following table (in thousands):

The increase in North American net sales was primarily attributable to increased sales volume in our North American commercial vehicle and automotive markets of $18.3 million and $13.6 million, respectively. Our decrease in net sales in South America was primarily due to lower PST product sales volume and the negative impact of unfavorable foreign currency translation. Our increase in net sales in Europe and Other was primarily due to increased sales of European commercial vehicle market products of $15.6 million, partially offset by an unfavorable change in foreign currency translation.

Cost of Goods Sold and Gross Margin.  Cost of goods sold increased by 3.6% primarily due to higher material costs. Our material cost as a percentage of net sales increased to 49.2% for 2014 compared to 46.7% for 2013. As a result, our gross margin declined to 28.9% for 2014 compared to 31.2% for 2013. Material costs increased and gross margin declined primarily due to an unfavorable change in foreign currency exchange rates and an unfavorable mix of products sold in our Electronics and PST segments.

Our Control Devices segment gross margin increased slightly due to the benefit of increased sales volume and labor efficiencies.

Our Electronics segment gross margin declined despite an increase in sales due to higher material costs resulting from an unfavorable change in certain foreign currency exchange rates and an unfavorable change in mix of products sold.

Our PST segment gross margin declined due to lower sales volume, higher material costs due to an unfavorable change in foreign currency exchange rates and an unfavorable change in mix of products sold as well as an increase in labor costs which included $0.9 million in business realignment costs.

Selling, General and Administrative (“SG&A”). SG&A expenses increased by $0.5 million for 2014 compared to 2013 due to higher wages and other employee benefits which included business realignment costs in our PST segment of $0.5 million, and higher performance-based compensation, product liability and intellectual property defense costs, which were partially offset by lower SG&A costs in our PST segment as a result of lower sales commissions, foreign currency translation and the implementation of cost savings measures.

Design and Development. Design and development costs increased by $1.2 million due to higher product development costs in our Controls Devices segment and lower cost reimbursements in our Electronics segment, which were partially offset by lower product development costs in our PST segment.

Goodwill Impairment. A goodwill impairment of $51.5 million was recorded for the year ended December 31, 2014 related to our PST segment.  The impairment was due to lower future sales and earnings growth projections resulting from significant weakening of the Brazilian economy and automotive market. This non-cash impairment is more fully described in Note 2 to our consolidated financial statements.

Operating Income (Loss). Operating income (loss) is summarized in the following table by reportable segment (in thousands):

NM – not meaningful

Our Control Devices segment operating income increased due to an increase in sales volume and labor efficiencies, which were partially offset by higher design and development, SG&A personnel and product liability defense costs.

Our Electronics segment operating income decreased despite higher sales due to higher material costs resulting from an unfavorable change in certain foreign exchange rates and an unfavorable change in mix of products sold. Also, operating income decreased as a result of higher design and development, SG&A personnel and intellectual property defense costs.

Our PST segment operating performance decreased due to a goodwill impairment charge of $51.5 million, lower sales volume, higher material costs due to an unfavorable change in foreign currency exchange rates and mix of products sold as well as increased labor costs including business realignment costs of $1.6 million, which were partially offset by lower other sales, general and administrative costs and design and development costs resulting from cost reduction measures implemented.

Unallocated corporate operating loss increased primarily due to higher performance-based compensation.

Operating income (loss) by geographic location are summarized in the following table (in thousands):

North American operating income includes interest expense, net of approximately $13.1 million and $15.9 million for the years ended December 31, 2014 and 2013, respectively.

Our North American operating results increased primarily as a result of increased sales in the North American commercial vehicle and automotive markets. The decrease in profitability in South America was primarily due to a PST goodwill impairment charge, lower sales volume, an unfavorable change in mix of products sold, increased labor costs and an unfavorable impact of foreign exchange rates. Our results in Europe and Other were negatively affected by higher material costs from an unfavorable change in foreign currency exchange rates and an unfavorable mix of product sales and higher SG&A expenses substantially all of which related to our Electronics segment.

Interest Expense, net. Interest expense, net decreased by $1.2 million, or 6.7% during 2014 when compared to 2013 primarily due to a lower average debt balance outstanding and a lower weighted-average interest rate. We redeemed our $175.0 million 9.5% senior secured notes in September and October 2014 using borrowings of $100.0 million on our Credit Facility (which bore annual interest of approximately 1.7% in the fourth quarter of 2014), proceeds from the sale of the Wiring business and existing cash.

Equity in Earnings of Investee. Equity earnings for Minda increased to $0.8 million from $0.5 million in 2013 primarily due to higher sales, which were partially offset by unfavorable changes in foreign currency translation.

Other Expense, net. Other expense, net was $0.6 million for 2014 compared to $1.5 million for 2013. We record certain foreign currency transaction and forward currency hedge contract gains and losses as a component of other expense, net on the consolidated statement of operations. Our results for 2014 and 2013 were unfavorably affected by approximately $1.2 million and $2.1 million, respectively, due to the volatility in certain foreign exchange rates. The majority of the unfavorable foreign currency loss for 2014 relates to the currency fluctuation of the Argentinian peso compared to the Brazilian real in our PST segment. The unfavorable foreign currency losses were partially offset by the gain of $0.4 million in 2014 on the termination of our interest rate swap and income of $0.6 million received in 2013 by our PST segment associated with deposits at a financial institution.

Provision (Benefit) for Income Taxes. We recognized an income tax provision (benefit) of $(1.9) million and $2.8 million for federal, state and foreign income taxes for 2014 and 2013, respectively. We continue to assert that it is more-likely-than-not that our U.S. and certain foreign deferred tax assets will not be realized, and therefore we provide a valuation allowance offsetting those deferred tax assets. The decrease in tax expense for 2014 compared to 2013 was predominantly due to the tax benefit recognized on the loss incurred by PST, as adjusted for the non-tax deductible goodwill impairment charge. The decrease in the tax expense was partially offset by a discrete tax item related to our foreign operations recorded during the current period. The decrease in the effective tax rate for 2014 to (3.5)% compared to 2013 of 12.0% was due to the 2014 recognition of a tax benefit on the PST operating loss which was offset by the impact of the non-tax deductible PST goodwill impairment charge and the discrete tax item discussed above.

Year Ended December 31, 2013 Compared To Year Ended December 31, 2012

Consolidated statements of operations as a percentage of net sales are presented in the following table (in thousands):

Net Sales. Net sales for our reportable segments, excluding inter-segment sales are summarized in the following table (in thousands):

Our Control Devices segment net sales increased due to higher volume and new products primarily in our North American automotive vehicle market of $23.9 million during 2013 when compared to 2012. This increase was partially offset by a volume decrease in commercial vehicle products of $0.3 million.

Our Electronics segment net sales increased primarily due to a $25.3 million increase in sales of our European commercial vehicle products resulting from higher volume and new product sales.

Our PST segment net sales decreased slightly from 2012 despite a 9.9% increase in net sales in local currency (Brazilian Real) due to an unfavorable foreign currency translation of approximately $19.7 million, or 10.9%.

Net sales by geographic location are summarized in the following table (in thousands):

The North American geographic location consists of the results of our operations in the United States and Mexico.

The increase in North American net sales was primarily attributable to higher North American automotive vehicle sales of $23.9 million. Our decrease in net sales in South America was primarily due to an unfavorable foreign currency translation which more than offset the sales volume increase. Our increase in net sales in Europe and Other was primarily due to increased sales of European commercial vehicle market products of $25.3 million.

Cost of Goods Sold and Gross Margin.  Cost of goods sold increased by 6.2% primarily due to a 7.7% increase in sales. Costs of goods sold during 2012 was unfavorably affected as a result of a $3.2 million inventory purchase accounting fair value adjustment and $0.7 million in business realignment charges related to PST, neither of which recurred in 2013. Our material cost as a percentage of net sales remained consistent at 46.7% for both 2013 and 2012. Our gross margin increased to 31.2% for 2013 from 30.2% in 2012.

Our Control Devices segment gross margin increased due to a 8.7% increase in net sales and a favorable change in mix of products sold. In addition, material costs were favorably impacted by lower component costs.

Our Electronics segment gross margin increased primarily due to a 15.6% increase in net sales and a favorable change in mix of products sold.

Our PST segment gross margin improved despite a 1.0% decrease in net sales due to cost savings realized from a business realignment initiative that occurred in the second quarter of 2012. PST gross margin also improved due to a $3.2 million inventory purchase accounting adjustment and $0.7 million of business realignment charges in 2012, neither of which recurred in 2013, but were offset by higher component costs in 2013 as a result of an unfavorable change in foreign currency exchange rates.

Selling, General and Administrative Expenses. SG&A expenses decreased by $3.2 million during 2013 compared to 2012 primarily due to lower employee benefit costs, commissions and professional fees. In 2012, the Company incurred professional fees associated with the acquisition of controlling interest in PST and integration thereof. Our PST segment benefited in 2013 from the business realignment activities described below.

In response to a change in customer demand, the PST segment incurred business realignment charges of $1.6 million for the year ended December 31, 2012, of which $0.6 million and $0.7 million was recorded in SG&A expenses and cost of goods sold, respectively, with the remainder recorded in design and development expense. The charges consist primarily of severance costs related to workforce reductions.

There were no significant restructuring or business realignment charges related to the Control Devices or Electronics reportable segments during the years ended December 31, 2013 or 2012.

Design and Development. Design and development costs increased by $1.4 million during 2013 due to lower cost reimbursements in our Electronics segment and higher product development costs in our Controls Devices segment, which was partially offset by lower product development costs in our PST segment.

Operating Income (Loss). Operating income (loss) is summarized in the following table by continuing reportable segment (in thousands):

Our Control Devices segment operating income increased due to higher sales, a favorable change in mix of products sold and lower component costs.

Our Electronics segment operating income increased due to higher sales and favorable change in mix of products sold.

Our PST segment operating income increased despite the slight decline in sales in U.S. dollars due to lower operating costs, primarily SG&A expenses associated with the business realignment initiative that occurred in mid-2012. PST operating income was negatively impacted in 2012 by a $3.2 million inventory purchase accounting adjustment and $1.6 million in business realignment charges, neither of which recurred in 2013, but were partially offset by higher component costs in 2013.

The decrease in operating income from corporate activities is primarily related to higher net corporate costs.

Operating income by geographic location are summarized in the following table (in thousands):

North American operating income includes interest expense, net of approximately $15.9 million for each of the years ended December 31, 2013 and 2012, respectively.

Our North American results increased primarily as a result of higher sales in our North American automotive vehicle market during 2013 as compared to 2012. The increase in operating income in South America was primarily due to higher sales in local currency, lower operating costs associated with the business realignment initiative that occurred in mid-2012, lower cost of sales related to an inventory purchase accounting adjustment and business realignment charges in 2012. Our operating income in Europe and Other were favorably affected by our increased European commercial vehicle market sales during 2013.

Interest Expense, net. Interest expense, net decreased by $1.8 million during 2013 when compared to 2012 primarily from reduced interest on our PST term notes and revolving credit facilities due to lower average outstanding loan balances.

Equity in Earnings of Investee. Equity earnings for Minda decreased by $0.3 million to $0.5 million for the year ended December 31, 2013 compared to $0.8 million for the year ended December 31, 2012 due to lower sales and an unfavorable change in foreign exchange rates.

Other Expense, net. Other expense, net was $1.5 million for 2013 compared to $4.6 million for 2012. We record certain foreign currency transaction and forward currency hedge contract gains and losses as a component of other expense, net on the consolidated statements of operations. Our results for the years ended December 31, 2013 and 2012 were unfavorably affected by $2.1 million and $4.0 million, respectively, due to the volatility in certain foreign exchange rates, primarily the Brazilian real. Most of the unfavorable foreign currency loss during 2012 was related to the translation of PST’s U.S. dollar-denominated debt, the balance of which decreased in 2013. Also, our PST segment received $0.6 million of income in 2013 associated with deposits at a financial institution.

Provision for Income Taxes. We recognized an income tax provision of $2.8 million and $0.0 million for federal, state and foreign income taxes for 2013 and 2012, respectively. We have continued to assert that it is more-likely-than-not that our U.S. and certain foreign deferred tax assets will not be realized, and therefore we provide a valuation allowance offsetting those deferred tax assets. The increase in tax expense for 2013 compared to 2012 was related to the improved financial performance of our Swedish and Brazilian operations. The results of our U.S. operations do not impact tax expense due to the valuation allowance. However, the income or loss of our U.S. operations does impact the effective tax rate. The effective tax rate for 2013 increased to 12.0% from (0.8)% in 2012 primarily due to the improvement of our Swedish and Brazilian operations as well as the decline in the financial performance of our U.S. operations.

Liquidity and Capital Resources

Summary of Cash Flows for the years ended December 31, 2014 and 2013 (in thousands):

The decrease in cash provided by operating activities for the year ended December 31, 2014 compared to the year ended December 31, 2013 was primarily due to higher working capital levels as well as a $6.5 million decrease in net income excluding the impacts of the non-cash PST goodwill impairment and losses on the sale of the Wiring business and early extinguishment of debt. Our receivable terms and collections rates have remained consistent between periods presented.

The increase in net cash provided by investing activities for 2014 was due to $71.4 million in cash received from the sale of the Wiring business, which was partially offset by a $0.6 million increase in capital expenditures.

The increase in net cash used for financing activities for 2014 was due to the redemption of our senior secured notes including redemption premium totaling $183.0 million, which was partially offset by net borrowings on our Credit Facility and other debt of $100.0 million and $4.5 million, respectively.

Summary of Cash Flows for the years ended December 31, 2013 and 2012 (in thousands):

The decrease in cash provided by operating activities for the year ended December 31, 2013 compared to the year ended December 31, 2012 was primarily due to maintaining higher working capital levels at our PST and our former Wiring segments which were attributable to planned production increases which offset a $12.8 million increase in net income. Our receivable terms and collections rates have remained consistent between periods presented.  These uses of cash were partially offset by increases in accounts payable and accrued expenses of $16.8 million and $2.7 million, respectively, during 2013 compared to 2012.

The decrease in net cash used for investing activities for 2013 was due to a $19.8 million payment made in conjunction with the acquisition of a controlling interest in PST during 2012.

The decrease in net cash used for financing activities was primarily due to lower principal payments made on the asset-based Credit Facility and PST term loans.

Summary of Future Cash Flows

The following table summarizes our future cash outflows resulting from financial contracts and commitments, as of December 31, 2014 (in thousands):

Management will continue to focus on minimizing its weighted-average cost of capital and believes that cash flows from operations and the availability of funds from our Credit Facility will provide sufficient liquidity to meet our future growth and operating needs.

As outlined in Note 4 to our condensed consolidated financial statements, our Credit Facility permits borrowing up to a maximum level of $300.0 million which includes an accordion feature which allows the Company to increase the availability by up to $80.0 million upon the satisfaction of certain conditions. This variable rate facility provides us with lower borrowing rates than the 9.5% senior secured notes redeemed in 2014 and provides the flexibility to refinance other outstanding debt or finance acquisitions through September 2019. The Credit Facility contains certain financial covenants that require the Company to maintain less than a maximum leverage ratio and more than a minimum interest coverage ratio. The Credit Facility also contains affirmative and negative covenants and events of default that are customary for credit arrangements of this type including covenants which place restrictions and/or limitations on the Company’s ability to borrow money, make capital expenditures and pay dividends. The Credit Facility had an outstanding balance of $100.0 million at December 31, 2014. The Company was in compliance with all covenants at December 31, 2014. The covenants included in our Credit Facility to date have not and are not expected to limit our financing flexibility.

PST maintains several short-term obligations and long-term loans used for working capital purposes. At December 31, 2014, there was $28.0 million outstanding on the PST term loans.  The PST loans at December 31, 2014 mature as follows: $17.4 million in 2015, $4.2 million in 2016, $2.7 million in 2017, $1.4 million annually in 2018 and 2019, $0.4 million in 2020 and $0.5 million in 2021. 

The term loan for our Suzhou, China subsidiary is in the amount of 9.0 million Chinese yuan and matures in April 2015. The U.S. dollar equivalent outstanding loan balance was $1.5 million at December 31, 2014. The Suzhou note is included on the consolidated balance sheets as a component of current portion of long-term debt. Interest is payable quarterly at 120.0% of the one-year lending rate published by The People's Bank of China.

The Company's wholly owned subsidiary located in Stockholm, Sweden, has an overdraft credit line which allows overdrafts on the subsidiary's bank account up to a maximum level of 20.0 million Swedish krona, or $2.6 million, at December 31, 2014. At December 31, 2014, there were no overdrafts on the bank account.

Although the Company's notes and credit facilities contain various covenants, the violation of which would limit or preclude their use or accelerate the maturity, the Company has not experienced and does not expect these covenants to restrict our financing flexibility. The Company has been and expects to continue to remain in compliance with these covenants during the term of the notes and credit facilities.

Our future results could also be adversely affected by unfavorable foreign currency exchange rates. We have significant foreign denominated transaction exposure in certain locations, especially in Brazil, Argentina, Mexico, Sweden and Estonia. We have entered into foreign currency forward contracts to reduce our exposure related to certain foreign currency fluctuations. Our future results could also be unfavorably affected by increased commodity prices as commodity fluctuations impact the cost of our raw material purchases. 

At December 31, 2014, we had a cash and cash equivalents balance of approximately $43.0 million, of which $17.4 million was held in the United States and $25.6 million was held in foreign locations. The decrease from $62.8 million at December 31, 2013 was primarily due to the use of cash to redeem the 9.5% senior secured notes in October 2014.

Commitments and Contingencies

See Note 10 to the consolidated financial statements for disclosures of the Company’s commitments and contingencies.

Seasonality

Our Control Devices and Electronics segments are not typically materially affected by seasonality, however the demand for our PST segment consumer products is typically higher in the second half of the year, the fourth quarter in particular. 

Inflation and International Presence

Given the current economic climate and recent fluctuations in certain commodity prices, we believe that an increase in such items could significantly affect our profitability. Furthermore, by operating internationally, we are affected by foreign currency exchange rates and the economic conditions of certain countries. See Note 9 to the consolidated financial statements for additional details on the Company’s commodity price and foreign currency exchange rate risks.

Off-balance Sheet Arrangements

At December 31, 2014, we do not have any off-balance sheet arrangements that have, or are, in the opinion of management, reasonably likely to have, a current or future material effect on our financial condition or results of operations.

Critical Accounting Policies and Estimates

The preparation of financial statements in conformity with U.S. Generally Accepted Accounting Principles (“GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent liabilities at the date of the consolidated financial statements, and the reported amounts of revenues and expenses during the reporting period.

On an ongoing basis, we evaluate estimates and assumptions used in our consolidated financial statements. We base our estimates on historical experience and on various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results could differ from these estimates.

Our critical accounting policies, those most important to the financial presentation and those that are the most complex, subjective or require significant judgment, are as follows.

Revenue Recognition and Sales Commitments. We recognize revenues from the sale of products, net of actual and estimated returns of products sold based on historical authorized returns, at the point of passage of title, which is either at the time of shipment or upon customer receipt based on the terms of the sale. We often enter into agreements with our customers at the beginning of a given vehicle’s expected production life. Once such agreements are entered into, it is our obligation to fulfill the customers’ purchasing requirements for the entire production life of the vehicle. These agreements are subject to potential renegotiation from time to time, which may affect product pricing. In certain limited instances, we may be committed under existing agreements to supply products to our customers at selling prices which are not sufficient to cover the direct cost to produce such products. In such situations, we recognize losses immediately. These agreements generally may also be terminated by our customers at any time.

On an ongoing basis, we receive blanket purchase orders from our customers, which include pricing terms. Purchase orders do not always specify quantities. We recognize revenue based on the pricing terms included in our purchase orders as our products are shipped to our customers. In certain instances, we may be asked to provide our customers with annual cost reductions as part of certain agreements. In addition, we have ongoing adjustments to our pricing arrangements with our customers based on the related content, the cost of our products and other commercial factors. Such pricing adjustments are recognized as they are negotiated with our customers.

Warranties. Our warranty liability is established based on our best estimate of the amounts necessary to settle future and existing claims on products sold as of the balance sheet dates. This estimate is based on historical trends of units sold and payment amounts, combined with our current understanding of the status of existing claims. To estimate the warranty liability, we are required to forecast the resolution of existing claims as well as expected future claims on products previously sold. Although we believe that our warranty liability is adequate and that the judgment applied is appropriate, such amounts estimated to be due and payable could differ materially from what will actually transpire in the future. Our customers are increasingly seeking to hold suppliers responsible for product warranties, which could negatively impact our exposure to these costs.

Allowance for Doubtful Accounts. We have concentrations of sales and trade receivable balances with a few key customers. Therefore, it is critical that we evaluate the collectability of accounts receivable based on a combination of factors. In circumstances where we are aware of a specific customer’s inability to meet their financial obligations, a specific allowance for doubtful accounts is recorded against amounts due to reduce the net recognized receivable to the amount we reasonably believe will be collected. Additionally, we review historical trends for collectability in determining an estimate for our allowance for doubtful accounts. If economic circumstances change substantially, estimates of the recoverability of amounts due to the Company could be reduced by a material amount. We do not have collateral requirements with our customers.

Contingencies. We are subject to legal proceedings and claims, including product liability claims, commercial or contractual disputes, environmental enforcement actions and other claims that arise in the normal course of business. We routinely assess the likelihood of any adverse judgments or outcomes to these matters, as well as ranges of probable losses, by consulting with internal personnel principally involved with such matters and with our outside legal counsel handling such matters.

We have accrued for estimated losses when it is probable that a liability or loss has been incurred and the amount can be reasonably estimated. Contingencies by their nature relate to uncertainties that require the exercise of judgment both in assessing whether or not a liability or loss has been incurred and estimating that amount of probable loss. The liabilities may change in the future due to new developments or changes in circumstances. The inherent uncertainty related to the outcome of these matters can result in amounts materially different from any provisions made with respect to their resolution.

Inventory Valuation. Inventories are valued at the lower of cost or market using the FIFO method for our Electronics and Control Devices segments and average cost method for our PST segment. Where appropriate, standard cost systems are utilized for purposes of determining cost and the standards are adjusted as necessary to approximate actual costs. Estimates of the lower of cost or market value of inventory are determined based upon current economic conditions, historical sales quantities and patterns and, in some cases, the specific risk of loss on specifically identified inventories. We adjust our excess and obsolescence reserve at least on a quarterly basis.  Excess inventories are quantities of items that exceed anticipated sales or usage for a reasonable period.  We have guidelines for calculating provisions for excess inventories based on the number of months of inventories on hand compared to anticipated sales or usage.

Goodwill. Goodwill is tested for impairment at least annually on October 1 and whenever events or changes in circumstances provide an indicator of potential impairment. The valuation methodologies employed by the Company use subjective measures including forward looking financial information and discount rates that directly impact the resulting fair values used to test the Company’s reporting units for impairment.

We conducted our annual goodwill impairment test for our majority owned subsidiary, PST Eletrônica Ltda. (“PST”) on October 1, 2013 and did so without a need to expand the impairment test to “step two” of ASC 350 as PST’s calculated fair value exceeded its carrying value by approximately 10% and no indicators of impairment were identified as disclosed in the Company’s 2013 Form 10-K.

During the second quarter of 2014, however, indicators of potential impairment required us to conduct an interim impairment test. Those indicators included a decline in recent operating results and lower growth expectations primarily due to the weakening of the Brazilian economy and automotive market. In accordance with ASC 350, the Company completed “step one” of the impairment analysis and concluded that, as of June 30, 2014, the fair value of the PST reportable segment was below its carrying value, including goodwill. As a result, “step two” of the impairment test was initiated in accordance with ASC 350. Due to its time intensive nature, the “step two” analysis was not completed until the third quarter ended September 30, 2014. In accordance with ASC 350, the Company recorded its best estimate of $29.3 million as a non-cash goodwill impairment charge (of which $6.4 million was attributable to noncontrolling interest) as of June 30, 2014 which was included in the Company’s consolidated statements of operations. Based on the completed “step two” analysis in the third quarter of 2014, the final goodwill impairment as of June 30, 2014 was $23.5 million (of which $5.2 million was attributable to noncontrolling interest). As such, we recorded an adjustment to reduce the goodwill impairment by $5.8 million (of which $1.3 million was attributable to noncontrolling interest) as of September 30, 2014 which was included in our consolidated statements of operations for the three months ended September 30, 2014.

In the fourth quarter of 2014, we conducted our annual goodwill impairment test for PST and completed “step one” of the impairment test concluding that as of October 1, 2014 the fair value of the PST reportable segment was less than its carrying value, including goodwill. PST’s fair value decreased further due to significantly lower sales and earnings growth expectations which were a result of lower forecasted growth in the Brazilian economy and automotive markets and further forecasted decline in foreign currency exchange rates thereby increasing PST’s material costs. Based on the completed “step two” analysis, a goodwill impairment charge of $28.0 million (of which $6.1 million was attributable to noncontrolling interest) was recorded which represented all of the remaining PST goodwill.

The fair value measurement of the reporting unit under the “step one” analysis and the “step two” analysis (a non-recurring fair value measure) in their entirety are classified as Level 3 inputs. The estimates and assumptions underlying the fair value calculations used in our impairment test are uncertain by their nature and can vary significantly from actual results. Factors that management must estimate include, but are not limited to, industry and market conditions, sales volume and pricing, raw material costs, capital expenditures, working capital changes, cost of capital, debt-equity mix and tax rates. The estimates and assumptions that most significantly affect the fair value calculation are sales volume and the associated cash flow assumptions, market growth and weighted average cost of capital. The estimates and assumptions used in the estimate of fair value are consistent with those the Company uses in its internal planning.

The “step two” of the PST goodwill impairment test utilized the following methodologies in determining fair value. Buildings and machinery were valued at an estimated replacement cost for an asset of comparable age and condition. PST finite lived identified intangible assets are customer relationships, tradenames and technology. Customer relationships were valued using an excess earnings method, using various inputs such as the estimated customer attrition rate, future earnings forecast, the amount of contributory asset charges, and a discount rate. Tradenames and technology intangibles are valued using a relief from royalty method, which is based upon comparable market royalty rates for tradenames of similar value. Other working capital items are generally recorded at carrying value, unless there were known conditions that would impact the ultimate settlement amount of a particular item.

Long-Lived and Finite-Lived Assets. We review the carrying value of our long-lived assets and finite-lived intangible assets for impairment when events or circumstances indicate that their carrying value may not be recoverable. Factors that we consider important that could trigger our testing of the related asset groups for an impairment include current period operating or cash flow losses combined with a history of operating or cash flow losses, a projection or forecast that demonstrates continuing losses, significant adverse changes in the business climate within a particular business or current expectations that a long-lived asset will be sold or otherwise disposed of significantly before the end of its estimated useful life. To test for impairment, the estimated undiscounted cash flows expected to be generated from the use and disposal of the asset or asset group is compared to its carrying value. An asset group is established by identifying the lowest level of cash flows generated by the group of assets that are largely independent of cash flows of other assets. If cash flows cannot be separately and independently identified for a single asset, we will determine whether an impairment has occurred for the group of assets for which we can identify projected cash flows. If these undiscounted cash flows are less than their respective carrying values, an impairment charge would be recognized to the extent that the carrying values exceed estimated fair values. The estimation of undiscounted cash flows and fair value requires us to make assumptions regarding future operating results. The results of the impairment testing are dependent on these estimates which require judgment. The occurrence of certain events, including changes in economic and competitive conditions, could impact cash flows eventually realized and management’s ability to accurately assess whether an asset is impaired.

Due to the impairment of the PST goodwill in 2014, we performed an evaluation of PST’s long-lived assets and concluded that there was no impairment resulting from the lower forecasted undiscounted future cash flows.

Share-Based Compensation. The estimate for our share-based compensation expense involves a number of assumptions. We believe each assumption used in the valuation is reasonable because it takes into account the experience of the plan and reasonable expectations associated with performance and market based conditions. We estimate volatility and forfeitures based on historical data, future expectations and the expected term of the share-based compensation awards. The assumptions, however, involve inherent uncertainties. As a result, if other assumptions had been used, share-based compensation expense could have varied.

Income Taxes. Deferred income taxes are provided for temporary differences between amounts of assets and liabilities for financial reporting purposes and the basis of such assets and liabilities as measured by tax laws and regulations. Our deferred tax assets include, among other items, net operating loss carryforwards and tax credits that can be used to offset taxable income in future periods and reduce income taxes payable in those future periods. These deferred tax assets begin to expire after December 31, 2025 and 2021, respectively.

Accounting standards requires that deferred tax assets be reduced by a valuation allowance if, based on all available evidence, it is considered more likely than not that some portion or all of the recorded deferred tax assets will not be realized in future periods. This assessment requires significant judgment, and in making this evaluation, the Company considers available positive and negative evidence, including the potential to carryback net operating losses and credits, the future reversal of certain taxable temporary differences, actual and forecasted results, and tax planning strategies that are both prudent and feasible. Risk factors include the U.S. economic conditions affecting the U.S. automotive and commercial vehicle markets of which the Company has significant operations.

During the fourth quarter of 2008, the Company concluded that it was no longer more-likely-than-not that we would realize our U.S. deferred tax assets. As a result we provided a full valuation allowance, net of certain future reversing taxable temporary differences, with respect to our U.S. deferred tax assets. We intend to continue to maintain a full valuation allowance on our deferred tax assets until there is sufficient evidence to support the reversal of all or some portion of these allowances. However, as a result of the sale of the Wiring business and debt refinancing during the second half of 2014 and anticipated future earnings, we believe that there may be a reasonable possibility that sufficient positive evidence could develop within the next 12 months that may allow us to reach a conclusion that some or all of the valuation allowance on our U.S. deferred tax assets will no longer be needed. Reversal of some or all of the U.S. valuation allowance would result in the recognition of certain deferred tax assets and a decrease to income tax expense for the period the reversal is recorded. However, the exact timing and amount of the valuation allowance release are subject to change on the basis of the level of profitability that we are able to actually achieve.

We consider the financial reporting basis in excess of tax basis, which includes unremitted earnings, of certain non-U.S. subsidiaries to be indefinitely invested outside the United States on the basis of estimates that future domestic cash generation will be sufficient to meet future domestic cash needs and our specific plans for investment in those non-U.S. subsidiaries. Therefore, we have not recorded a deferred tax liability. Specifically with respect to unremitted earnings and the impact of those earnings on the amount of the financial reporting basis in excess of tax basis, if in the future we cannot support that the earnings are indefinitely invested outside the United States, we would need to adjust our income tax provision in the period we determined that the earnings will no longer be indefinitely invested outside the United States (see Note 5).

Recently Issued Accounting Standards Not Yet Adopted

In January 2015, the Financial Accounting Standards Board ("FASB") issued accounting standard update (“ASU”) 2015 – 01 “Income Statement – Extraordinary and Unusual Items (Subtopic 225-20)” that eliminates the concept of extraordinary items and their segregation from the results of ordinary operations and expands presentation and disclosure guidance to include items that are both unusual in nature and occur infrequently. The new accounting standard is effective for fiscal years beginning after December 15, 2015.  The Company will adopt as of January 1, 2016.  The new accounting standard is not expected to have a material impact on our consolidated financial statements or disclosures.

In June 2014, the FASB issued ASU 2014 – 12 “Stock Compensation - Accounting for Share-Based Payments When the Terms of an Award Provide That a Performance Target Could Be Achieved after the Requisite Service Period” that requires performance targets that could be achieved after the requisite service period be treated as performance conditions that affect the vesting of the award.  The new accounting standard is effective for fiscal years beginning after December 15, 2015. The Company will adopt as of January 1, 2016. We do not expect this standard to have an impact on our consolidated financial statements or financial statement disclosures.

In May 2014, the FASB issued ASU 2014-09, "Revenue from Contracts with Customers (Topic 606)," which is the new comprehensive revenue recognition standard that will supersede existing revenue recognition guidance under U.S. GAAP. The standard's core principle is that a company will recognize revenue when it transfers promised goods or services to a customer in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services. To achieve this principle, an entity identifies the contract with a customer, identifies the separate performance obligations in the contract, determines the transaction price, allocates the transaction price to the separate performance obligations and recognizes revenue when each separate performance obligation is satisfied. This ASU is effective for annual and interim periods beginning on or after December 15, 2016, and early adoption is not permitted.  As such, the Company will adopt this standard in the first quarter of 2017.  We are currently evaluating the impact of adopting this standard on its consolidated financial statements.

Recently Adopted Accounting Standards

In April 2014, the FASB issued accounting standard update (“ASU”) No. 2014-08, “Presentation of Financial Statements (Topic 205) and Property, Plant, and Equipment (Topic 360)”, which amends the definition of a discontinued operation in Accounting Standards Codification (“ASC”) 205-20 and requires entities to provide additional disclosures about discontinued operations as well as disposal transactions that do not meet the discontinued-operations criteria. The new standard changes the definition of a discontinued operation and requires discontinued operations treatment for disposals of a component or group of components that represents a strategic shift that has or will have a major impact on an entity’s operations or financial results. This ASU is effective prospectively for all disposals (except disposals classified as held for sale before the adoption date) or components initially classified as held for sale in periods beginning on or after December 15, 2014. Early adoption is permitted. We adopted this ASU in May 2014 and have applied it prospectively to new disposals and new classifications of disposal groups as held for sale including the Wiring business.

In July 2013, the Financial Accounting Standards Board (“FASB”) issued ASU No. 2013-11, “Income Taxes (Topic 740)”, which requires entities to present in the financial statements an unrecognized tax benefit, or a portion of an unrecognized tax benefit as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss, or a tax credit carryforward except to the extent such items are not available or not intended to be used at the reporting date to settle any additional income taxes that would result from the disallowance of a tax position. In such instances, the unrecognized tax benefit is required to be presented in the financial statements as a liability and not be combined with deferred tax assets. This ASU is effective for fiscal years beginning after December 15, 2013. This ASU was adopted on January 1, 2014 which did not have a material impact on our consolidated financial statements.

Forward-Looking Statements

Portions of this report on Form 10-K contain “forward-looking statements” under the Private Securities Litigation Reform Act of 1995. These statements appear in a number of places in this report and include statements regarding the intent, belief or current expectations of the Company, with respect to, among other things, our (i) future product and facility expansion, (ii) acquisition strategy, (iii) investments and new product development, (iv) growth opportunities related to awarded business and (v) operation expectations. Forward-looking statements may be identified by the words “will,” “may,” “should,” “designed to,” “believes,” “plans,” “projects,” “intends,” “expects,” “estimates,” “anticipates,” “continue,” and similar words and expressions. The forward-looking statements are subject to risks and uncertainties that could cause actual events or results to differ materially from those expressed in or implied by the statements. Important factors that could cause actual results to differ materially from those in the forward-looking statements include, among other factors:

In addition, the forward-looking statements contained herein represent our estimates only as of the date of this filing and should not be relied upon as representing our estimates as of any subsequent date.  While we may elect to update these forward-looking statements at some point in the future, we specifically disclaim any obligation to do so, whether to reflect actual results, changes in assumptions, changes in other factors affecting such forward-looking statements or otherwise.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Interest Rates

We are exposed to interest rate risk primarily from the effects of changes in interest rates. At December 31, 2014, approximately 76.7% of our outstanding debt was floating-rate and 23.3% was fixed-rate. We estimate that a 1.0% change in the interest costs of our floating-rate debt outstanding as of December 31, 2014 would change interest expense on an annual basis by approximately $1.0 million.

Currency Exchange Rates

In addition to the United States, we have significant operations in Europe, South America and Mexico. As a result we are subject to translation risk because our foreign operations are in local currency (particularly the Brazilian real, Mexican peso, euro and Swedish krona) must be translated into U.S. dollars. As currency exchange rates fluctuate, the translation of our consolidated statements of operations into U.S. dollars affects the comparability of revenues, expenses, operating income, net income and earnings (loss) per share between years.

We use derivative financial instruments, including foreign currency forward contracts, to mitigate our exposure to fluctuations in foreign currency exchange rates by reducing the effect of such fluctuations on foreign currency denominated intercompany transactions, inventory purchases and other foreign currency exposures.

As discussed in detail in Note 9 to our consolidated financial statements, we have entered into foreign currency forward contracts the purpose of which is to reduce exposure related to the Company’s euro-denominated receivables as well as to reduce exposure to future Mexican peso-denominated purchases and U.S. dollar purchases by our non-U.S. dollar functional currency European business units. These foreign currency contracts expire throughout 2015. We estimate that a 10.0% unidirectional change in currency exchange rates would result in a change in fair value at December 31, 2014 by approximately $3.0 million. It is important to note that the change in fair value of the foreign currency forward contacts would be partially offset by changes in the underlying exposures being hedged.

We estimate that a 10.0% unidirectional change in currency exchange rates relative to the U.S dollar would have changed our pre-tax income for the year ended December 31, 2014 by approximately $7.5 million.

Commodity Price Risk

The competitive marketplace in which we operate may limit our ability to recover increased costs through higher prices. As such, we are subject to market risk with respect to commodity price fluctuations principally related to our purchases of purchase of copper, zinc, resins and certain other commodities through a combination of fixed price agreements, staggered short-term contract maturities and commercial negotiations with our suppliers and customers. In the future, if we believe that the terms of a fixed price agreement become beneficial to us, we will enter into another such instrument. We have sought to alleviate the effect of increasing commodity costs by including a material pass-through provision in our customer contracts whenever possible. We may also consider pursuing alternative commodities or alternative suppliers to mitigate this risk over a period of time. The volatility in certain commodity costs negatively affected our operating results.

Item 8. Financial Statements and Supplementary Data.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

AND FINANCIAL STATEMENT SCHEDULE

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders of

Stoneridge, Inc. and Subsidiaries

We have audited the accompanying consolidated balance sheets of Stoneridge, Inc. and Subsidiaries as of December 31, 2014 and 2013, and the related consolidated statements of operations, comprehensive income (loss), cash flows and shareholders' equity for each of the three years in the period ended December 31, 2014. Our audits also included the financial statement schedule included in Item 15(a)(2). These financial statements and schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Stoneridge, Inc. and Subsidiaries at December 31, 2014 and 2013, and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2014, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Stoneridge, Inc. and Subsidiaries’ internal control over financial reporting as of December 31, 2014, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated March 13, 2015 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Cleveland, Ohio

March 13, 2015

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these consolidated financial statements.

CONSOLIDATED STATEMENTS OF OPERATIONS

The accompanying notes are an integral part of these consolidated financial statements.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

The Company has combined comprehensive income (loss) from continuing operations and comprehensive loss from discontinued operations herein.

The accompanying notes are an integral part of these consolidated financial statements.

CONSOLIDATED STATEMENTS OF CASH FLOWS