STRATTEC SECURITY CORP - Quarter Report: 2018 December (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549  

FORM 10-Q

For the quarterly period ended December 30, 2018

or

For the transition period from                      to                     

Commission File Number 0-25150

STRATTEC SECURITY CORPORATION

(Exact Name of Registrant as Specified in Its Charter)

3333 West Good Hope Road, Milwaukee, WI 53209

(Address of Principal Executive Offices)

(414) 247-3333

(Registrant’s Telephone Number, Including Area Code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     YES  ☒    NO  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).     YES  ☒    NO  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.    ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     YES  ☐    NO  ☒

Indicate the number of shares outstanding of each of the issuer’s classes of common stock as of the latest practicable date.

Common stock, par value $0.01 per share: 3,741,786 shares outstanding as of December 31, 2018 (which number includes all restricted shares previously awarded that have not vested as of such date).

STRATTEC SECURITY CORPORATION

FORM 10-Q

December 30, 2018

INDEX

PROSPECTIVE INFORMATION

A number of the matters and subject areas discussed in this Form 10-Q contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These statements may be identified by the use of forward-looking words or phrases such as “anticipate,” “believe,” “would,” “expect,” “intend,” “may,” “planned,” “potential,” “should,” “will,” and “could,” or the negative of these terms or words of similar meaning. These include statements regarding expected future financial results, product offerings, global expansion, liquidity needs, financing ability, planned capital expenditures, management’s or the Company’s expectations and beliefs, and similar matters discussed in this Form 10-Q. The discussion of such matters and subject areas contained herein is qualified by the inherent risks and uncertainties surrounding future expectations generally, and also may materially differ from the Company’s actual future experience.

The Company’s business, operations and financial performance are subject to certain risks and uncertainties, which could result in material differences in actual results from the Company’s current expectations. These risks and uncertainties include, but are not limited to, general economic conditions, in particular relating to the automotive industry, consumer demand for the Company’s and its customers’ products, competitive and technological developments, customer purchasing actions, changes in warranty provisions and customers’ product recall policies,  foreign currency fluctuations, uncertainties stemming from U.S. trade policies, tariffs and reactions to same from foreign countries, costs of operations, the volume and scope of product returns and warranty claims and other matters described in the section titled “Risk Factors” in the Company’s Form 10-K report filed on September 6, 2018 with the Securities and Exchange Commission for the year ended July 1, 2018.

Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements. The forward-looking statements made herein are only made as of the date of this Form 10-Q and the Company undertakes no obligation to publicly update such forward-looking statements to reflect subsequent events or circumstances occurring after the date of this Form 10-Q.

Item 1 Financial Statements

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Condensed Consolidated Statements of (Loss) Income and Comprehensive (Loss) Income

(In Thousands, Except Per Share Amounts)

(Unaudited)

The accompanying notes are an integral part of these Condensed Consolidated Statements of (Loss) Income and Comprehensive (Loss) Income.

3

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Condensed Consolidated Balance Sheets

(In Thousands, Except Share Amounts)

The accompanying notes are an integral part of these Condensed Consolidated Balance Sheets.

4

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Condensed Consolidated Statements of Cash Flows

(In Thousands)

(Unaudited)

The accompanying notes are an integral part of these Condensed Consolidated Statements of Cash Flows.

5

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Basis of Financial Statements

STRATTEC SECURITY CORPORATION designs, develops, manufactures and markets automotive access control products including mechanical locks and keys, electronically enhanced locks and keys, steering column and instrument panel ignition lock housings, latches, power sliding door systems, power lift gate systems, power deck lid systems, door handles and related products for primarily North American automotive customers. We also supply global automotive manufacturers through a unique strategic relationship with WITTE Automotive (“WITTE”) of Velbert, Germany, and ADAC Automotive (“ADAC”) of Grand Rapids, Michigan. Under this relationship, STRATTEC, WITTE and ADAC market the products of each company to global customers under the “VAST Automotive Group” brand name (as more fully described herein). STRATTEC products are shipped to customer locations in the United States, Canada, Mexico, Europe, South America, Korea, China and India, and we provide full service and aftermarket support for each VAST Automotive Group partner’s products. We also maintain a 51 percent interest in a joint venture, STRATTEC Advanced Logic, LLC (“SAL LLC”), which exists to introduce a new generation of biometric security products based on the designs of Actuator Systems, our partner and the owner of the remaining ownership interest. The business of SAL LLC has been wound down to sell only commercial biometric locks.

The accompanying condensed consolidated financial statements reflect the consolidated results of STRATTEC SECURITY CORPORATION, its wholly owned Mexican subsidiary, STRATTEC de Mexico, and its majority owned subsidiaries, ADAC-STRATTEC, LLC and STRATTEC POWER ACCESS LLC. STRATTEC SECURITY CORPORATION is located in Milwaukee, Wisconsin. STRATTEC de Mexico is located in Juarez, Mexico. ADAC-STRATTEC, LLC and STRATTEC POWER ACCESS LLC have operations in El Paso, Texas and Juarez and Leon, Mexico. Equity investments in Vehicle Access Systems Technology LLC (“VAST LLC”) and SAL LLC, for which we exercise significant influence but do not control and are not the primary beneficiary, are accounted for using the equity method. VAST LLC consists primarily of three wholly owned subsidiaries in China, one wholly owned subsidiary in Brazil and one joint venture entity in India. The results of the VAST LLC foreign subsidiaries and joint venture are reported on a one-month lag basis. SAL LLC is located in El Paso, Texas. We have only one reporting segment.

In the opinion of management, the accompanying condensed consolidated balance sheets as of December 30, 2018 and July 1, 2018, which have been derived from our audited financial statements, and the related unaudited interim condensed consolidated financial statements included herein contain all adjustments, consisting only of normal recurring items, necessary for their fair presentation in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”) and in accordance with Rule 10-01 of Regulation S-X. All significant intercompany transactions have been eliminated.

Interim financial results are not necessarily indicative of operating results for an entire year. The information included in this Form 10-Q should be read in conjunction with the financial statements and notes thereto included in the STRATTEC SECURITY CORPORATION 2018 Annual Report, which was filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 6, 2018.

New Accounting Standards

In May 2014, the FASB issued an update to the accounting guidance for the recognition of revenue arising from contracts with customers. The update supersedes most current revenue recognition guidance and outlines a single comprehensive model for revenue recognition based on the principle that an entity should recognize revenue in an amount that reflects the expected consideration to be received in the exchange of goods and services. The guidance update also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts. We implemented the new standard effective July 2, 2018, the first day of our 2019 fiscal year, using the modified retrospective approach to transition to the new standard. We assessed our revenue stream based upon the provisions of our customer contracts in effect on the July 2, 2018 effective date to determine the cumulative effect of initially applying the guidance. Based on our assessment, the adoption date financial statement impact was limited to a balance sheet reclassification required to establish the contract liability concept provided for in the guidance. As such, comparative financial information for reporting periods prior to July 2, 2018, has not been restated and continues to be reported in accordance with our revenue recognition policies prior to the adoption of the new guidance. Additionally, there was no cumulative effect adjustment required to be recorded to our retained earnings. The effect of the reclassification changes made to our July 2, 2018 Condensed Consolidated Balance Sheet increased Receivables, net by $1.2 million, with a corresponding increase to Accrued Liabilities: Other. Refer to the discussion of Revenue from Contracts with Customers included in these Notes to Condensed Consolidated Financial Statements.

6

In February 2016, the FASB issued an update to the accounting guidance for leases. The update increases the transparency and comparability among organizations by requiring lessees to recognize lease assets and lease liabilities on the balance sheet and to disclose key information about leasing arrangements. The guidance is effective for fiscal years beginning after December 15, 2018 and interim periods within those years. We do not expect that the adoption of this pronouncement will have a material impact on our consolidated financial statements.

In August 2016, the FASB issued an update to the accounting guidance on the classification of certain cash receipts and cash payments. The update aims to eliminate diversity in practice in how certain cash receipts and cash payments are presented and classified in the statement of cash flows. The guidance is effective for fiscal years beginning after December 15, 2017 and interim periods within those years. The adoption of this pronouncement did not have a material impact on our consolidated financial statements.

In February 2018, the FASB issued guidance on the reclassification of certain tax effects from accumulated other comprehensive income. The guidance permits entities to reclassify tax effects stranded in accumulated other comprehensive income as a result of U.S. tax reform to retained earnings. The guidance is effective for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. We elected early adoption beginning effective December 30, 2018. The adoption of the guidance resulted in the reclassification of $4.0 million from accumulated other comprehensive income to retained earnings during the quarter ended December 30, 2018.

Derivative Instruments

We own and operate manufacturing operations in Mexico.  As a result, a portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate. During the three and six month periods ended December 30, 2018 and December 1, 2017, we had contracts with Bank of Montreal that provided for monthly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs. Our objective in entering into these currency forward contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso forward contracts are not used for speculative purposes and are not designated as hedges.  As a result, all currency forward contracts are recognized in our accompanying condensed consolidated financial statements at fair value and changes in the fair value are reported in current earnings as part of Other (Expense) Income, net.

The following table quantifies the outstanding Mexican peso forward contracts as of December 30, 2018 (thousands of dollars, except average forward contractual exchange rates):

The fair market value of all outstanding Mexican peso forward contracts in the accompanying Condensed Consolidated Balance Sheets was as follows (thousands of dollars):

The pre-tax effects of the Mexican peso forward contracts are included in Other (Expense) Income, net on the accompanying Condensed Consolidated Statements of (Loss) Income and Comprehensive (Loss) Income and consisted of the following (thousands of dollars):

7

Fair Value of Financial Instruments

The fair value of our cash and cash equivalents, accounts receivable, accounts payable and borrowings under our credit facility approximated book value as of December 30, 2018 and July 1, 2018. Fair value is defined as the exchange price that would be received for an asset or paid for a liability (an exit price) in the principal or most advantageous market in an orderly transaction between market participants on the measurement date.

The following table summarizes our financial assets and liabilities measured at fair value on a recurring basis as of December 30, 2018 (in thousands):  

The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan and are included in Other Long-term Assets in the accompanying Condensed Consolidated Balance Sheets. Refer to discussion of Mexican peso forward contracts under Derivative Instruments above. The fair value of the Mexican peso forward contracts considers the remaining term, current exchange rate, and interest rate differentials between the U.S. dollar and Mexican peso. There were no transfers between Level 1 and Level 2 assets during the six month period ended December 30, 2018.

Equity Earnings of Joint Ventures

We hold a one-third interest in a joint venture company, VAST LLC, with WITTE and ADAC. VAST LLC exists to seek opportunities to manufacture and sell all three companies’ products in areas of the world outside of North America and Europe. Our investment in VAST LLC, for which we exercise significant influence but do not control and are not the primary beneficiary, is accounted for using the equity method.

The following are summarized statements of operations for VAST LLC (in thousands):  

8

We hold a 51% ownership interest in a joint venture company, SAL LLC, which was formed to introduce a new generation of biometric security products based upon the designs of Actuator Systems LLC, our partner. SAL LLC is considered a variable interest entity based on loans from STRATTEC as discussed below. STRATTEC is not the primary beneficiary and does not control the entity. Accordingly, our investment in SAL LLC is accounted for using the equity method.

Loans were made from STRATTEC to SAL LLC in support of operating expenses and working capital needs. The outstanding loan amounts totaled $2.6 million as of December 30, 2018 and July 1, 2018. As of each balance sheet date, the outstanding loan amount was eliminated against STRATTEC’s Investment in SAL LLC in the preparation of the consolidated financial statements.

Even though we maintain a 51 percent ownership interest in SAL LLC, effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made by loans from STRATTEC to SAL LLC. Therefore, STRATTEC recognized 100 percent of the losses of SAL LLC up to our committed financial support through Equity Earnings of Joint Ventures in the accompanying Condensed Consolidated Statements of (Loss) Income and Comprehensive (Loss) Income for all periods presented in this report. STRATTEC’s equity loss of SAL LLC totaled $11,000 and $17,000 for the three and six month periods ended December 30, 2018, respectively. STRATTEC’s equity earnings of SAL LLC totaled $69,000 and $60,000 for the three and six month periods ended December 31, 2017, respectively.

The business of SAL LLC has been wound down to sell only commercial biometric locks.

We have sales of component parts to VAST LLC and SAL LLC, purchases of component parts from VAST LLC, expenses charged to VAST LLC for engineering and accounting services and expenses charged to us from VAST LLC for general headquarters expenses.  The following table summarizes these related party transactions with VAST LLC and SAL LLC for the periods indicated below (in thousands):

Credit Facilities

STRATTEC has a $40 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank. ADAC-STRATTEC LLC has a $30 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by STRATTEC. The credit facilities both expire August 1, 2021. The ADAC-STRATTEC Credit Facility borrowing limit decreases to $25 million effective July 1, 2019. Borrowings under either credit facility are secured by our U.S. cash balances, accounts receivable, inventory, and fixed assets. Interest on borrowings under the STRATTEC Credit Facility and interest on borrowings under the ADAC-STRATTEC Credit Facility prior to December 31, 2018 were at varying rates based, at our option, on the London Interbank Offering Rate (“LIBOR”) plus 1.0 percent or the bank’s prime rate. Effective December 31 2018, and thereafter, interest on borrowings under the ADAC-STRATTEC Credit Facility is at varying rates based, at our option, on the LIBOR plus 1.25 percent or the bank’s prime rate. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-STRATTEC Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. As of December 30, 2018, we were in compliance with all financial covenants required by these credit facilities.

Outstanding borrowings under the credit facilities were as follows (in thousands): 

9

Average outstanding borrowings and the weighted average interest rate under each credit facility referenced above were as follows for each period presented (in thousands):

Commitments and Contingencies

We are from time to time subject to various legal actions and claims incidental to our business, including those arising out of alleged defects, alleged breaches of contracts, product warranties, intellectual property matters and employment related matters. It is our opinion that the outcome of such matters will not have a material adverse impact on our consolidated financial position, results of operations or cash flows. With respect to warranty matters, although we cannot ensure that future costs of warranty claims by customers will not be material, we believe our established reserves are adequate to cover potential warranty settlements.

In 1995, we recorded a provision of $3 million for estimated costs to remediate an environmental contamination site at our Milwaukee facility. The facility was contaminated by a solvent spill, which occurred in 1985, from a former above ground solvent storage tank located on the east side of the facility. The reserve was originally established based on third party estimates to adequately cover the cost for active remediation of the contamination. Due to changing technology and related costs associated with active remediation of the contamination, in fiscal 2010, the reserve was adjusted based on updated third party estimates to adequately cover the cost for active remediation of the contamination. Additionally, in fiscal 2016, we obtained updated third party estimates for adequately covering the cost for active remediation of this contamination. Based upon the updated estimates, no further adjustment to the reserve was required. From 1995 through December 30, 2018, costs of approximately $588,000 have been incurred related to the installation of monitoring wells on the property and ongoing monitoring costs. We monitor and evaluate the site with the use of these groundwater monitoring wells. An environmental consultant samples these wells one or two times a year to determine the status of the contamination and the potential for remediation of the contamination by natural attenuation, the dissipation of the contamination over time to concentrations below applicable standards. If such sampling evidences a sufficient degree of and trend toward natural attenuation of the contamination at the site, we may be able to obtain a closure letter from the regulatory authorities resolving the issue without the need for active remediation. If a sufficient degree and trend toward natural attenuation is not evidenced by sampling, a more active form of remediation beyond natural attenuation may be required. The sampling has not yet satisfied all of the requirements for closure by natural attenuation. As a result, sampling continues and the reserve remains at an amount to reflect our estimated cost of active remediation. The reserve is not measured on a discounted basis. We believe, based on findings-to-date and known environmental regulations, that the remaining environmental reserve of $1.3 million at December 30, 2018 is adequate.

10

Shareholders’ Equity

A summary of activity impacting shareholders’ equity for the three and six month periods ended December 30, 2018 and December 31, 2017 were as follows (in thousands):

11

Revenue from Contracts with Customers

We generate revenue from the production of parts sold to automotive and light-truck Original Equipment Manufacturers (“OEMs”), or Tier 1 suppliers at the direction of the OEM, under long-term supply agreements supporting new vehicle production. Such agreements also require related production of service parts subsequent to the initial vehicle production periods. Additionally, we generate revenue from the production of parts sold in aftermarket service channels and to non-automotive commercial customers.

Revenue Recognition:

Our contracts with customers under long-term supply agreements do not commit the customer to a specified quantity of parts. However, we are generally required to fulfill our customers’ purchasing requirements for the production life of the vehicle. Contracts do not become a performance obligation until we receive either a purchase order and/or customer release for a specific number of parts at a specified price. While long-term supply agreements may range from four to six years for new vehicle production and ten to fifteen subsequent years for service parts production, contracts may be terminated by customers at any time. Historically, terminations have been minimal. Contracts may also provide for annual price reductions over the production life of the vehicle, and prices are adjusted on an ongoing basis to reflect changes in product content/cost and other commercial factors.

12

Revenue is recognized at a point in time when control of the parts produced are transferred to the customer according to the terms of the contract, which is usually when the parts are shipped or delivered to the customer’s premises. Customers are generally invoiced upon shipment or delivery and payment generally occurs within 45 to 90 days after the shipment date. The amount of revenue recognized reflects the consideration that we expect to be entitled to receive in exchange for those products based on purchase orders, annual price reductions and ongoing price adjustments, some of which is accounted for as variable consideration. We use the most likely amount method, the single most likely outcome of the contract, to estimate the amount to which we expect to be entitled. There were no significant changes to our estimates of variable consideration during the reporting period and significant changes to our estimates of variable consideration are not expected in future periods.

We do not have an enforceable right to payment at any time prior to when the parts are shipped or delivered to the customer. Therefore, we recognize revenue at the point in time we satisfy a performance obligation by transferring control of a part to a customer. Amounts billed to customers related to shipping and handling costs are included in Net Sales in the accompanying Condensed Consolidated Statements of (Loss) Income and Comprehensive (Loss) Income. Shipping and handling costs are accounted for as fulfillment costs and are included in Cost of Goods Sold in the accompanying Condensed Consolidated Statements of (Loss) Income and Comprehensive (Loss) Income.

Tooling and Pre-Production Engineering Costs Related to Long-Term Supply Arrangements:

We incur pre-production engineering and tooling costs related to the products produced for our customers under long-term supply agreements. Customer reimbursements for tooling and pre-production engineering activities that are part of a long-term supply arrangement are accounted for as a reduction of cost in accordance with ASC 340, Other Assets and Deferred Costs. Pre-production costs related to long-term supply agreements with a contractual guarantee for reimbursement are included in Other Current Assets in the accompanying Condensed Consolidated Balance Sheets.  We expense all pre-production engineering costs for which reimbursement is not contractually guaranteed by the customer. All pre-production tooling costs related to customer-owned tools for which reimbursement is not contractually guaranteed by the customer or for which we do not have a non-cancelable right to use the tooling is also expensed when incurred.

Receivables, net:

Receivables, net include amounts billed and currently due from customers. We maintain an allowance for doubtful accounts to provide for estimated amounts of receivables not expected to be collected. We continually assess our receivables for collectability and any allowance is recorded based upon age of the outstanding receivables, historical payment experience, customer creditworthiness and general economic conditions.

Contract Balances:

We have no material contract assets as of December 30, 2018. Contract liability balances primarily include discounts recognized as a reduction in sales at the point of revenue recognition, but which will be applied by the customer agreement after the end of the reporting period. The activity related to contract liability balances during the six month period ended December 30, 2018 was as follows (thousands of dollars):

Revenue by Product Group and Customer:  

Revenue by product group was as follows (thousands of dollars):

13

Revenue by customer or customer group was as follows (thousands of dollars):