Super Micro Computer, Inc. - Annual Report: 2011 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

For the fiscal year ended June 30, 2011

or

For the transition period from                      to                     

Commission File Number 001-33383

Super Micro Computer, Inc.

(Exact name of registrant as specified in its charter)

980 Rock Avenue

San Jose, CA 95131

(Address of principal executive offices, including zip code)

(408) 503-8000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b of the Exchange Act)    Yes  ¨    No  x

The aggregate market value of the registrant’s Common Stock held by non-affiliates, based upon the closing price of the Common Stock on December 31, 2010, as reported by the Nasdaq Global Market, was approximately $310,199,000. Shares of Common Stock held by each executive officer and director and by each person who owns 5% or more of the outstanding Common Stock, based on filings with the Securities and Exchange Commission, have been excluded since such persons may be deemed affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of August 22, 2011 there were 40,325,404 shares of the registrant’s common stock, $0.001 par value, outstanding, which is the only class of common stock of the registrant issued.

DOCUMENTS INCORPORATED BY REFERENCE

None

Table of Contents

SUPER MICRO COMPUTER, INC.

ANNUAL REPORT ON FORM 10-K

FOR THE FISCAL YEAR ENDED JUNE 30, 2011

TABLE OF CONTENTS

This Annual Report on Form 10-K contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, as amended (Exchange Act) that involve risks and uncertainties. These statements relate to future events or our future financial performance. In some cases, you can identify forward-looking statements by terminology including “would,” “could,” “may,” “will,” “should,” “expect,” “intend,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” or “continue,” the negative of these terms or other comparable terminology. In evaluating these statements, you should specifically consider various factors, including the risks described below, under “Item 1A Risk Factors”, and in other parts of this Form 10-K as well as in our other filings with the SEC. These factors may cause our actual results to differ materially from those anticipated or implied in the forward-looking statements. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. We cannot guarantee future results, levels of activity, performance or achievements.

Table of Contents

PART I

Overview

We are a global leader in server technology and green computing innovation. We develop and provide high performance server solutions based on an innovative, modular and open-standard architecture. Our solutions include a range of complete rackmount servers, storage systems, workstations, blade servers, networking devises and complete rack solutions, as well as subsystems and accessories which can be used by distributors, original equipment manufacturers, or OEMs, and end customers to assemble server systems. We offer our clients a high degree of flexibility and customization by providing what we believe to be the industry’s broadest array of servers, server subsystems and accessories, which are interoperable and can be configured to create complete server systems. Our server systems, subsystems and accessories are architected to provide high levels of reliability, quality and scalability, thereby enabling benefits in the areas of performance, thermal management, power efficiency and total cost of ownership. We base our solutions on open standard components, such as processors from Intel, AMD and Nvidia and our solutions can utilize both the Linux and Windows operating systems.

We perform the majority of our research and development efforts in-house, which increases the communication and collaboration between design teams, streamlines the development process and reduces time-to-market. We have developed a set of design principles which allow us to aggregate individual industry standard materials to develop proprietary components, such as serverboards, chassis, power supplies and networking / storage devices. This building block approach allows us to provide a broad range of SKUs, and enables us to build and deliver application-optimized solutions based upon customers’ application requirements. As of June 30, 2011, we offered over 4,500 SKUs, including SKUs for rackmont and blade server systems, serverboards, chassis and power supplies and other system accessories.

We conduct our operations principally from our headquarters in California and subsidiaries in the Netherlands and Taiwan. We sell our server systems and server subsystems and accessories primarily through distributors, which include value added resellers and system integrators, and to a lesser extent to OEMs as well as through our direct sales force. During fiscal year 2011, our products were purchased by over 600 customers, most of which are distributors in 85 countries. We commenced operations in 1993 and have been profitable every year since inception. For fiscal years 2011, 2010 and 2009, our net sales were $942.6 million, $721.4 million and $505.6 million, respectively, and our net income was $40.2 million, $26.9 million and $16.1 million, respectively.

Industry Background

Increasing Demand for Computing Capacity

As businesses of all sizes process larger quantities of data to communicate, transact and collaborate, their business processes are becoming more complex and their requirements for computing capacity are growing rapidly. Businesses are using traditional networked environments, such as local area networks, or LANs, as well as the Internet, to host a wide range of applications including databases, Intranets and email. Businesses are also using external functions, such as data centers, e-commerce storefronts and extranets, to enable growth of their operations. The infrastructure and computing model to support those businesses are often referred as “Cloud Computing”. All of these factors and business’ needs are fueling the demand for increased computing power and storage capacity.

Evolution of Open Systems and Scale-out Computing

Computing architectures are continuing to evolve to meet this rapidly growing demand for computing capacity. As businesses increasingly require solutions that provide flexibility and scalability in a cost effective

1

Table of Contents

manner, they are moving away from traditional proprietary computing solutions toward open system servers with x86 based architectures using either Linux or Windows operating systems. Businesses are building upon this modular and open system concept to create what are commonly referred to as scale-out computing architectures. These scale-out architectures typically consist of open standard components that are configured into modular computing systems and organized into clustered or rackmount server configurations. These systems are designed to comply with a set of industry standard specifications that are referred to as Server System Infrastructure, or SSI. SSI is also an industry standard organization, which defines server specification standards. We actively participate in the SSI organization and have a representative on the board of directors. Our development methodology for servers is not only to comply with the SSI standards but also to focus on the superset of SSI (which we call Super-SSI), in order that our products accommodate our own proprietary design as well as comply with SSI standards. Scale-out computing enables businesses to add computing capacity incrementally as their needs arise without significantly disrupting existing systems, providing greater flexibility and scalability and improving total cost of ownership over earlier generations of server systems.

Increasing Need for Rapidly Deployable, Highly Optimized Server Solutions

Scale-out server architectures provide significant benefits for many businesses. However, there are a wide range of circumstances in which businesses need more than just the incremental computing capacity that can be obtained by adding more general purpose servers as part of a scale-out deployment. In these circumstances, the nature of the underlying computing architecture contributes meaningfully to the competitive advantage of the business. We refer to the solutions these businesses seek as “application optimized” solutions, as these businesses typically need customized server configurations which provide optimal levels of processing, I/O or memory. These situations include, among others:

In all of these situations, server vendors are selected based on several key criteria:

Rapidly deployable server solutions. Many businesses desire the most advanced server technology as soon as it becomes commercially available. For instance, given the rapid product development cycles of new technologies in the networking hardware market, vendors of networking equipment increasingly seek to partner for certain aspects of their solutions, such as server technology, because it enables them to deliver a high performance solution to their customers more quickly. Similarly, online service providers must continue to deploy the latest server technology as soon as it becomes available since the ability to cost-effectively deliver a high degree of service is critical to their business. Because traditional server vendors typically use third party component suppliers, they must deal with the time, complexity and sometimes conflicting interests of coordinating with multiple suppliers throughout the product design and manufacturing process. This lengthens the time required to incorporate new technology into next generation systems. As a result, when building or upgrading their computing capability, businesses must either wait to deploy the latest products or accept solutions that do not incorporate the benefits of the latest technology.

2

Table of Contents

Increased optimization for specific business needs. Servers are deployed to address widely differing applications with very different system requirements. An online gaming company, for instance, may require a server architecture that enables optimal graphic processing, while a scientific research organization may require a server architecture that maximizes computing power. In either case, the business will seek to deploy server systems that are optimized to its specific needs to maximize performance while minimizing costs. Traditional server vendors typically offer only a limited number of standalone server models. Given this lack of flexibility and choice, building an application optimized server solution with traditional server components can be challenging. In order to meet their performance requirements, businesses must often purchase more computing functionality, including potentially more memory, greater processing power or more efficient power supplies, than would be otherwise necessary had the system been optimized for a specific business need. This increases not only the initial purchase price, but also the total cost of ownership over the useful life of the servers. Alternatively, businesses that seek a customized server solution from traditional server vendors face limited choices and often must accept considerable delays.

Superior price-to-performance per watt. In addition to the need for rapidly available and highly optimized server solutions, businesses with application optimized server needs face growing scalability challenges. Many application optimized server deployments constitute increasingly larger server systems, particularly in scale-out configurations, and can involve hundreds or even thousands of servers. Deployments of this magnitude can present numerous performance, space, energy and maintenance challenges. First, the aggregation of large numbers of computing systems leads to escalating energy requirements. As a result, businesses require scale-out computing systems that not only perform well but also minimize power consumption. Second, the increasing need for computing capacity has resulted in the need for higher density solutions to optimize the use of valuable floor space and to minimize operating costs. Third, the high density of the equipment, together with increasing power consumption per CPU, are creating a significant challenge for businesses attempting to manage heat dissipation, including the cost of owning and operating computer room air conditioning, or CRAC, units to effectively prevent system failure.

The Super Micro Solution

We develop and provide high performance server solutions based upon an innovative, modular and open-standard architecture. Our primary competitive advantages arise from how we use our integrated internal research and development organization to develop the intellectual property used in our server solutions. These have enabled us to develop a set of design principles and performance specifications that we refer to as Super SSI that meet industry standard SSI requirements and also incorporate advanced functionality and capabilities. Super SSI provides us with greater flexibility to quickly and efficiently develop new server solutions that are optimized for our customers’ specific application requirements. Our modular architectural approach has allowed us to offer our customers interoperable designs across all of our product lines. This modular approach, in turn, enables us to provide what we believe to be the industry’s largest array of server systems, subsystems and accessories.

Flexible and Customizable Server Solutions

We provide flexible and customizable server solutions to address the specific application needs of our customers. Our design principles allow us to aggregate industry standard materials to develop proprietary subsystems and accessories, such as serverboards, chassis and power supplies to deliver a broad range of products with superior features. Each subsystem and accessory is built to be backward compatible. We believe this building block approach allows us to provide a broad range of SKUs. As of June 30, 2011, we offered over 4,500 SKUs, including SKUs for rackmount and blade server systems, serverboards, chassis and power supplies and other system accessories.

Rapid Time-to-Market

We are able to significantly reduce the design and development time required to incorporate the latest technologies and to deliver the next generation application optimized server solutions. Our in-house design

3

Table of Contents

competencies and control of the design of many of the components used within our server systems enable us to rapidly develop, build and test server systems, subsystems and accessories with unique configurations. As a result, when new products are brought to market we are generally able to quickly design, integrate and assemble server solutions with little need to re-engineer other portions of our solution. Our efficient design capabilities allow us to offer our customers server solutions incorporating the latest technology with a superior price-to-performance ratio. We work closely with the leading microprocessor vendors to coordinate the design of our new products with their product release schedules, thereby enhancing our ability to rapidly introduce new products incorporating the latest technology.

Improved Power Efficiency and Thermal Management

We leverage advanced technology and system design expertise to reduce the power consumption of our server, blade, workstation and storage systems. We believe that we are an industry leader in power saving technology. Our server solutions include many design innovations to optimize power consumption and manage heat dissipation. We have designed flexible power management systems which customize or eliminate components in an effort to reduce overall power consumption. We have proprietary power supplies that can be integrated across a wide range of server system form factors which can significantly enhance power efficiency. We have also developed technologies that are specifically designed to reduce the effects of heat dissipation from our servers. Our thermal management technology allows our products to achieve a superior price-to-performance ratio while minimizing energy costs and reducing the risk of server malfunction caused by overheating.

High Density Servers

Our servers are designed to enable customers to maximize computing power while minimizing the physical space utilized. We offer server systems with twice the density of conventional solutions, which allows our customers to efficiently deploy our server systems in scale-out configurations. Through our proprietary technology, we can offer significantly more memory and expansion slots than traditional server systems with a comparable server form factor. In addition, we offer systems in a 1U configuration with features and capabilities generally offered by competitors only in a server with room for two racks or shelves, or a 2U server, configuration. For example, our “1U Twin” system contains two full feature dual processor, or DP, compute nodes in a 1U chassis. We also offer systems in a 2U configuration with features and capabilities generally offered by competitors only in a server with room for four racks or shelves, or a 4U server, configuration. For example, our “2U Twin²” system contains four full feature DP compute nodes in a 2U chassis which are designed to address the ever-increasing efficiency, density and low total cost of ownership demands of today’s high performance computing clusters and data centers. Our “2U Twin³ system contains eight full feature UP compute nodes in a 2U chassis which are designed to optimize for high-density and low-power environments. In addition, our MicroCloud, an 8-node system within a 3U enclosure provides a compelling, cost-effective solution for hosting, searching, or cloud computing applications.

Strategy

Our objective is to be the leading provider of application optimized, high performance server solutions worldwide. Key elements of our strategy include:

Maintain Our Time-to-Market Advantage

We believe one of our major competitive advantages is our ability to rapidly incorporate the latest computing innovations into our products. We intend to maintain our time-to-market advantage by continuing our investment in our research and development efforts to rapidly develop new proprietary server solutions based on industry standard components. We plan to continue to work closely with Intel, AMD, Nvidia and among others to develop products that are compatible with the latest generation of industry standard technologies. We believe these efforts will allow us to continue to offer products that lead in price for performance as each generation of computing innovations becomes available.

4

Table of Contents

Expand Our Product Offerings

We plan to increase the number of products we offer to our customers. Our product portfolio will continue to include additional solutions based on the latest Intel and AMD technologies as well as other technology vendors such as Nvidia. We plan to continue to improve the energy efficiency of our products by enhancing our ability to deliver improved power and thermal management capabilities, as well as servers and subsystems and accessories that can operate in increasingly dense environments. We also plan to continue developing and in the future offer additional management software capabilities that are integrated with our server products and will further enable our customers to simplify and automate the deployment, configuration and monitoring of our servers.

Further Develop Existing Markets and Expand Into New Markets

We intend to strengthen our relationships with existing customers and add new distributors and OEM partners. We will continue to target specific industry segments that require application optimized server solutions including data center environments, financial services, oil and gas exploration, biotechnology, entertainment and embedded applications. We have begun manufacturing and service operations in the Netherlands and Taiwan in support of European and Asian customers and we plan to continue to increase our overseas manufacturing capacity and expand our reach geographically.

Strengthen Our Relationships with Suppliers and Manufacturers

Our efficient supply chain and combined internal and outsourced manufacturing allow us to build systems to order that are customized, while minimizing costs. We plan to continue leveraging our relationships with suppliers and contract manufacturers in order to maintain and improve our cost structure as we benefit from economies of scale. We intend to continue to source non-core products from external suppliers. We also believe that as our solutions continue to gain greater market acceptance, we will generate growing and recurring business for our suppliers and contract manufacturers. We believe this increased volume will enable us to receive better pricing and achieve higher margins. We believe that a highly disciplined approach to cost control is critical to success in our industry. For example, we continue to maintain our warehousing capacity in Asia through our relationship with Ablecom Technology, Inc., or Ablecom, one of our major contract manufacturers and a related party, so that we continue to deliver products to our customers in Asia and elsewhere more quickly and in higher volumes.

Advanced Blade Server Technology

To meet the emerging demand for blade servers, we have developed and continued to improve our high-performance blade server solutions, called SuperBlades. Our SuperBlades are designed to share a common computing infrastructure, thereby saving additional space and power. Our SuperBlades are self-contained servers designed to achieve industry leading density and superior performance per square foot at a lower total cost of ownership. The SuperBlade’s enclosure provides power, cooling, networking, various interconnects and system-level management and supports both Intel Xeon and AMD Opteron processors. By creating a range of unique blade server offerings, we provide our customers with solutions that can be customized to fit their needs. In addition, the SuperBlade power supplies provide up to 94% efficiency, which is currently considered the highest AC power supply efficiency providing extreme electricity cost saving. We believe that our SuperBlade server system provides industry leading density, memory expandability, reliability, price-to-performance per square foot and energy saving. We also offer our TwinBlade SuperBlade configuration which includes two dual processor blades into one slot. The TwinBlade with the most current Infiniband quad data rate (QDR) connection enables the new SuperBlade to achieve even higher performance, density and efficiency by doubling the number of dual-processor compute nodes per 7U enclosure from 10 to 20. In addition to its superior processing power, TwinBlade combines 94%+ power supply efficiency with our innovative and highly efficient thermal and cooling system designs making it the greenest, most power-saving blade solution available. In March 2011, we launched our GPU SuperBlade which supports 20 GPUs in a single 7U blade enclosure. This GPU SuperBlade solution delivers maximum performance with the best CPU to GPU balance and optimized I/O.

5

Table of Contents

Products

We offer a broad range of application optimized server solutions, including complete rackmount and blade server systems and subsystems and accessories which customers can use to build complete server systems. Our servers are deployed in several configurations within two areas of an enterprise network:

Headquarters: Enterprises build large scalable server farms at the enterprise gateway to run many of the most demanding applications and to provide basic computational infrastructure. Enterprises typically deploy our rackmount servers in order to save floor space and enable rapid deployment of additional server capacity as computing demands increase. Enterprises may also choose to deploy our tower servers in a clustered configuration, which combines the processing capability of multiple standalone, or tower servers such that they act like a single, large computer in order to accomplish computationally intensive tasks in a more cost-effective manner.

Branch: Within branch office data rooms, servers are deployed in rackmount configurations, in order to simplify the upgrade of servers or to swap out faulty servers, minimizing network downtime and making the management of the server infrastructure easier to maintain for branch offices with less specialized IT staffs. Also, within branch office workgroups, enterprises typically deploy our tower servers to accomplish basic office functions such as centralizing printing jobs, serving files and running local e-mail and other messaging applications.

Server Systems

We sell server systems in rackmount, standalone tower and blade form factors. We currently offer a complete range of server options with single, dual and quad CPU capability supporting Intel Pentium and Xeon multi-core architectures in 1U, 2U, 3U, 4U, tower and blade form factors. We also offer complete server systems based on AMD dual and quad Opteron in 1U, 2U, 4U and blade form factors. As of June 30, 2011, we offered over 1,000 different server systems. For each system, we offer multiple chassis designs and power supply options to best suit customer requirements. We also offer multiple configurations based on our latest generation systems with most comprehensive selections of chassis and serverboards. A majority of our most common systems are also available in minimum 1U or 1/2 depth form factors which are approximately one half of the size of standard sized rackmount servers.

6

Table of Contents

The figure below depicts a typical rackmount server and the different components that we typically optimize for our customers. The layout presented is for illustrative purposes only and does not represent the typical layout of all our servers.

7

Table of Contents

Below is a table that summarizes the most common server configurations purchased by our customers. We also design and build other customized systems using these and other building blocks to meet specific customer requirements.

We offer a variety of server storage options depending upon the system, with disk drive alternatives including small computer system interface, serial advanced technology attachment, or SATA, SATAII, or SAS and SASII, Intelligent Drive Electronics, or IDE, and serial attached SCSI.

In addition to our server systems, we also offer Supermicro Intelligent Management, or SIM, card solutions which are sold as part of our server systems. Our SIM card implements the industry standard Intelligent Platform Management Interface, or IPMI 2.0, to provide remote access, system monitoring and administration functionality for our server platforms. Our SIM card includes key capabilities such as remote hardware status, failure notification, as well as the ability to power-cycle non-responsive servers and to manage the system through out-of-band network or KVM (keyboard, video and mouse) functionality over LAN. Our SIM solutions

8

Table of Contents

enable server administrators to view a server’s hardware status remotely, receive an alarm automatically when a failure occurs, and power cycle a system that is non-responsive. Our Intelligent Management module monitors onboard instrumentation such as temperature sensors, power status, voltages and fan speed, and provides remote power control capabilities to reboot and reset the server. It also includes remote access to the Basic Input/Output System, or BIOS, configuration and operating system console information. The monitoring and control functions work independently of the CPU because the SIM card is a completely separate processor. Data center administrators can gain full remote access to control the BIOS, utilities, operating systems and software applications. In summary, our SIM solutions include the following key features:

Furthermore, our system management software, Supermicro Server Management, or SSM, solution and High-Performance Computing , or HPC, cluster toolset have been designed for server farm. The SSM software provided the ability to manage large-scale servers and storage in an organization’s IT infrastructure. It includes optional modules as well as the capability of incorporating third-party plug-in software, which is connected within a common framework and enables communication between devices. The HPC Toolset is designed specifically for HPC cluster deployment and management. The Command Line Interface, or CLI, which utilizes the Linux operating system, provides a convenient working environment for our system integrator or the cluster administrator to deploy, configure, control, and manage the HPC cluster. Both of our SSM and HPC Toolset can leverage our SIM technology to integrate management functions.

Server Subsystems and Accessories

We believe we offer the largest array of modular server subsystems and accessories or building blocks in the industry that are sold off the shelf or built-to-order. These components are the foundation of our server solutions and span product offerings from the entry-level single and dual processor server segment to the high-end multi-processor market. The majority of the subsystems and accessories we sell individually are optimized to work together and are ultimately integrated into complete server systems.

Serverboards

We design our serverboards with the latest chipset and networking technologies. Each serverboard is designed and optimized to adhere to specific physical, electrical and design requirements in order to work with certain combinations of chassis and power supplies and achieve maximum functionality. For our rackmount server systems, we not only adhere to SSI specifications, but our Super SSI specifications provide an advanced set of features that increase the functionality and flexibility of our products. The following table displays our serverboard offerings for X9 Sandy Bridge (Intel’s new generation of Dual and Quad Core Xeon E3-1200 family support), X8 (Intel’s generation of QPI, Six and Eight Core, Dual and Quad Core Xeon 5600/5500/3600/3500 series), X7 (Intel’s generation of Dual and Quad Core Xeon 5000/5100 series), X6 (Intel’s 800Mhz Front Side Bus generation of Dual and Quad Xeon solutions) and H8 (AMD’s Six, Eight and Twelve Core, Dual and Quad Core Opteron 200 and 800 series). As of June 30, 2011, we offered more than 400 SKUs for serverboards.

9

Table of Contents

Below is a table that summarizes the most common serverboard configurations purchased by our customers.

Chassis and Power Supplies

Our chassis are designed to efficiently house our servers while maintaining interoperability, adhering to industry standards and increasing output efficiency through power supply design. We believe that our latest generation of power supplies achieves the maximum power efficiency available in the industry. In addition, we have developed a remote management system that offers the ability to stagger the start up of systems and reduce the aggregate power draw at system boot to allow customers to increase the number of systems attached to a power circuit. We design DC power solutions to be compatible with data centers that have AC, DC or AC and DC based power distribution infrastructures. We believe our unique power design technology reduces power consumption by increasing power efficiency up to 94%, which we believe is among the most efficient available in the industry. Our server chassis come with hot-plug, heavy-duty fans, fan speed control and an advanced air shroud design to maximize airflow redundancy.

The table below depicts some of our chassis product offerings including the 500-series (front I/O options and space constrained environments), 800-series (most widely used for single, dual and quad processor servers and storage systems), 700-series (Tower, 4U rackmount servers and workstations), 900-series (for high-density storage applications) and 100/200/400-series (for 2.5” hard disk drives server and ultra high density storage) chassis products. These chassis solutions offer redundant power, hold swap power supply, redundant cooling fan options and high efficiency AC and DC power combinations. As of June 30, 2011, we offered more than 500 SKUs for chassis and power supplies.

10

Table of Contents

Below is a table that summarizes the most common chassis configurations purchased by our customers.

Other System Accessories

As part of our server component offerings, we also offer other system accessories that our customers may require or that we use to build our server solutions. These other products include, among others, microprocessors, memory and disc drives that generally are third party developed and manufactured products that we resell without modification. As of June 30, 2011, we offered more than 2,600 SKUs for other system accessories.

Technology

We are focused on providing leading edge, high performance products for our customers. We have developed a design process to rapidly deliver products with superior features. The technology incorporated in our products is designed to provide high levels of reliability, quality, security and scalability. Our most advanced technology is developed in-house, which allows us to efficiently implement advanced capabilities into our server solutions. We work in collaboration with our key customers and suppliers to constantly improve upon our designs, reduce complexity and improve reliability.

Our rackmount and tower server solutions are based on our Super SSI architecture, which incorporates proprietary I/O expansion, thermal and cooling design features as well as high-efficiency power supplies. For example, our 1U servers now offer up to 5 I/O expansion slots with up to 32 DIMM slots to accommodate up to 512GB of memory, which, prior to Super SSI, was only possible in a 2U chassis. We also achieved higher memory densities by designing customized serverboards to include 16 memory slots without sacrificing I/O expansion capability. The result is what we believe to be a superior serverboard design that provides our customers with increased flexibility for their new and legacy add-on card support and the ability to keep up with the growing memory requirements needed to maintain system performance requirements.

Our latest chassis designs include advanced cooling mechanisms such as proprietary air shrouds to help deliver cool air directly to the hottest components of the system resulting in improved cooling efficiency and

11

Table of Contents

consequently increased system reliability. Our newest generation of power supplies incorporates advanced design features that provide what we believe to be the highest level of efficiency in the industry and therefore reduce overall power consumption. Our advanced power supply solutions include volume shipments of the industry’s first and only currently available 1U chassis and servers with up to 94% power efficiency.

Our 1U Twin, 2U Twin, 2U Twin², 2U Twin³ and TwinBlade product lines optimize for density, performance and efficiency, and have been rapidly adopted by customers and other manufacturers. Our GPU optimized product line in 1U, 2U, 4U and blade platforms provides extreme performance in calculation intensive applications. Our Atom server line featuring low power, low noise and small form factor is optimized for embedded and server appliance applications. Our innovative double-sided storage provides high density with the ability of hot-plug from front and back sides. Our Super Storage Bridge Bay (SBB) is optimized for mission-critical, enterprise-level storage application which can incorporate or bridge SATA, SAS, and FC storage solutions and provides hot-swappable canisters for all active components in the server.

We have developed standalone switch products, which include 1G Ethernet, 10G Ethernet, and Infiniband for rack-mount servers. These switch products will not only help us to up-sell our server products, but also can generate additional revenues.

Our SuperRack product lines offer a wide range of flexible accessory options including front, rear and side expansion units to provide modular solutions for system configuration. Data center, high-performance Cloud Computing and server farm customers can use us as a one-stop shop for all of their IT hardware needs. Our SuperRack offers easy installation and rear access with no obstructions for hot-swap devices, user-friendly cabling and cable identification, and effortless integration of our high-density server, storage and blade systems.

Our MicroCloud product lines are high-density, multi-node UP servers with 8 hot-pluggable nodes and 16 hot-swappable HDDs in a compact 3U form factor. MicroCloud integrates advanced technologies within a compact functional design to deliver high performance in environments with space and power limitations. The entire system is designed with efficiency in mind from its ease of maintenance to is high-efficiency, redundant Platinum Level (94%+) power modules. These combined features provide a compelling, cost-effective solution for IT professionals implementing new hosting architectures for SMB and Public/Private Cloud Computing applications.

Research and Development

We have over 18 years of research and development experience in server subsystems and accessories design and in recent years, have devoted additional resources to the design of server systems. Our engineering staff is responsible for the design, development, quality, documentation and release of our products. We continuously seek ways to optimize and improve the performance of our existing product portfolio and introduce new products to address market opportunities. We perform the majority of our research and development efforts in-house, increasing the communication and collaboration between design teams to streamline the development process and reducing time-to-market. We are determined to continue to reduce our design and manufacturing costs and improve the performance, cost effectiveness and thermal and space efficiency of our solutions.

Over the years, our research and development team has focused on the development of new and enhanced products that can support emerging protocols while continuing to accommodate legacy technologies. Much of our research and development activity is focused on the new product cycles of leading chipset vendors. We work closely with Intel, AMD, Nvidia and among others to develop products that are compatible with the latest generation of industry standard technologies under development. Our collaborative approach with the chipset vendors allows us to coordinate the design of our new products with their product release schedules, thereby enhancing our ability to rapidly introduce new products incorporating the latest technology. We work closely with their development teams to optimize chip performance and reduce system level issues. We also work with companies such as Nvidia on Graphics Processing Unit, or GPU, solutions. Similarly, we work very closely with our customers to identify their needs and develop our new product plans accordingly.

12

Table of Contents

We believe that the combination of our focus on internal research and development activities, our close working relationships with chipset vendors and our modular design approach allow us to minimize time-to-market. Since January 2005, we believe we were the first to introduce the following new technologies to the market:

As of June 30, 2011, we had 499 employees and 5 engineering consultants dedicated to research and development. Our total research and development expenses were $48.1 million, $37.4 million, and $34.5 million for fiscal years 2011, 2010 and 2009, respectively.

Sales, Marketing and Customer Service

To execute our strategy, we have developed a sales and marketing program which is primarily focused on indirect sales channels. As of June 30, 2011, our sales and marketing organization consisted of 153 employees and 28 independent sales representatives in 16 locations worldwide.

We work with distributors, including resellers and system integrators, and OEMs to market and sell customized solutions to their end customers. We provide sales and marketing assistance and training to our

13

Table of Contents

distributors and OEMs, who in turn provide service and support to end customers. We intend to leverage our relationships with key distributors and OEMs to penetrate select industry segments where our products can provide a superior alternative to existing solutions. For a more limited group of customers who do not normally purchase through distributors or OEMs, we have implemented a direct sales approach.

We maintain close contact with our distributors and end customers. We often collaborate during the sales process with our distributors and the customer’s technical point of contact to help determine the optimal system configuration for the customer’s needs. Our interaction with distributors and end customers allows us to monitor customer requirements and develop new products to better meet end customer needs.

International Sales

Product fulfillment and first level support for our international customers are provided by our distributors and OEMs. Our international sales efforts are supported both by our international offices in the Netherlands and Taiwan as well as by our U.S. sales organization. Sales to customers located outside of the U.S. represented 41.7%, 39.9% and 35.6% of net sales in fiscal years 2011, 2010 and 2009, respectively.

Marketing

Our marketing programs are designed to inform existing and potential customers, the trade press, distributors and OEMs about the capabilities and benefits of using our products and solutions. Our marketing efforts support the sale and distribution of our products through our distribution channels. We rely on a variety of marketing vehicles, including advertising, public relations, participation in industry trade shows and conferences to help gain market acceptance. We also provide funds for cooperative marketing to our distributors. These funds reimburse our distributors for promotional spending they may do on behalf of promoting Supermicro products. Promotional spending by distributors is subject to our pre-approval and includes items such as film or video for television, magazine or newspaper advertisements, trade show promotions and sales force promotions. The amount available to each distributor is based on its amount of purchases. We also work closely with leading microprocessor vendors in cooperative marketing programs and benefit from market development funds that they make available. These programs are similar to the programs we make available to our distributors in that we are reimbursed for expenses incurred related to promoting the vendor’s product.

Customer Service

We provide customer support for our blade and rackmount server systems through our website and 24-hour continuous direct phone based support. For strategic direct and OEM customers, we also have higher levels of customer service available, including, in some cases, on site service and support.

Customers

For fiscal year 2011, our products were purchased by over 600 customers, most of which are distributors, in 85 countries. None of our customers accounted for 10% or more of our net sales in fiscal years 2011, 2010 or 2009. End users of our products span a broad range of industries.

Intellectual Property

We seek to protect our intellectual property rights with a combination of trademark, copyright, trade secret laws and disclosure restrictions. We rely primarily on trade secrets, technical know-how and other unpatented proprietary information relating to our design and product development activities. We have issued patents and pending patent applications in the U.S. We also enter into confidentiality and proprietary rights agreements with our employees, consultants and other third parties and control access to our designs, documentation and other proprietary information.

14

Table of Contents

Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy aspects of our products or obtain and use information that we regard as proprietary. We cannot assure you that the steps taken by us will prevent misappropriation of our technology. We cannot assure you that patents will issue from our pending or future applications or that, with respect to our issued or any future patents, they will not be challenged, invalidated or circumvented, or that the rights granted under the patents will provide us with meaningful protection or any commercial advantage. In addition, the laws of some foreign countries do not protect our proprietary rights to as great an extent as the laws of the United States, and many foreign countries do not enforce these laws as diligently as government agencies and private parties in the United States.

Our industry is characterized by the existence of a large number of patents and frequent claims and related litigation regarding patent and other intellectual property rights. From time-to-time, third parties, including competitors, may assert patent, copyright, trademark or other intellectual property rights against us, our channel partners or our end-customers. Successful claims of infringement by a third party could prevent us from performing certain services or require us to pay substantial damages, royalties or other fees. Even if third parties may offer a license to their technology, the terms of any offered license may not be acceptable and the failure to obtain a license or the costs associated with any license could cause our business, operating results or financial condition to be materially and adversely affected. We typically indemnify our end-customers and distributors against claims that our products infringe the intellectual property of third parties.

Manufacturing and Quality Control

We use several third party suppliers and contract manufacturers for materials and sub-assemblies, such as serverboards, chassis, disk drives, power supplies, fans and computer processors. We believe that selectively using outsourced manufacturing services allows us to focus on our core competencies in product design and development and increases our operational flexibility. Our manufacturing strategy allows us to quickly adjust manufacturing capacity in response to changes in customer demand and to rapidly introduce new products to the market. We use Ablecom, a related party, for contract design and manufacturing coordination support. We work with Ablecom to optimize modular designs for our chassis and certain of our other components. Ablecom coordinates the manufacturing of chassis for us. In addition to providing a larger volume of contract manufacturing services for us, Ablecom continues to warehouse for us a number of components and subassemblies manufactured by multiple suppliers prior to shipment to our facilities in the U.S., Europe and Asia.

For server systems, assembly, test and quality control are completed at our wholly-owned manufacturing facility in San Jose, California which Quality / Environmental Management System (Q/EMS) has been ISO 9001:2000 certified since 2001 and ISO 14001:2004 certified since 2009. In fiscal year 2010, we began server integration operations in our Netherlands and Taiwan facilities to be closer to our key international customers and to reduce costs of shipping our products to our customers. These facilities Q/EMS have also been ISO-9001:2000 certified and ISO 14001:2004 certified. In accordance with the two mentioned ISO standard requirements, environmental awareness, quality control and inventory management is flowed down as a requirement to our suppliers and contract manufacturers with continuous reporting and ongoing qualification programs. The assembly of our server system products involves integrating supplied materials and manufactured sub-assemblies into final products, which are configured and tested before being delivered to our customers.

We maintain sufficient inventory such that most of our orders can be filled within 14 days. We monitor our inventory on a continuous basis in order to be able to meet customer orders and to avoid inventory obsolescence. Due to our modular designs, our inventory can generally be used with multiple different products, further reducing the risk of inventory write-downs.

Competition

The market for our products is highly competitive, rapidly evolving and subject to new technological developments, changing customer needs and new product introductions. We compete primarily with large

15

Table of Contents

vendors of x86 general purpose servers and components. In addition, we also compete with a number of smaller vendors who specialize in the sale of server components and systems. We believe our principal competitors include:

The principal competitive factors in our market include the following:

We believe that we compete favorably with respect to most of these factors. However, most of our competitors have longer operating histories, significantly greater resources and greater name recognition. They may be able to devote greater resources to the development, promotion and sale of their products than we can, which could allow them to respond more quickly to new technologies and changes in customer needs.

Employees

As of June 30, 2011, we employed 1,239 full time employees and 33 consultants, consisting of 499 employees in research and development, 153 employees in sales and marketing, 113 employees in general and administrative and 474 employees in manufacturing. Of these employees, 945 employees are based in our San Jose facility. We consider our highly qualified and motivated employees to be a key factor in our business success. Our employees are not represented by any collective bargaining organization and we have never experienced a work stoppage. We believe that our relations with our employees are good.

Available Information

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to reports filed or furnished pursuant to Sections 13(a) and 15(d) of the Securities Exchange Act are available free of charge, on or through our website at www.supermicro.com , as soon as reasonably practicable after we electronically file such reports with, or furnish those reports to, the Securities and Exchange Commission. Information contained on our website is not incorporated by reference in, or made part of this Annual Report on Form 10-K or our other filings with or reports furnished to the Securities and Exchange Commission.

Risks Related to Our Business and Industry

Economic conditions could materially adversely affect us.

Our operations and performance depend significantly on worldwide economic conditions. Uncertainty about current global economic conditions poses a risk as consumers and businesses may continue to postpone spending in response to tighter credit, unemployment, negative financial news and/or declines in income or asset values, which could have a material negative effect on demand for our products and services.

16

Table of Contents

In the event of renewed financial turmoil affecting the banking system and financial markets, additional consolidation of the financial services industry, or significant financial service institution failures, there could be a new or incremental tightening in the credit markets, low liquidity, and extreme volatility in fixed income, credit, currency, and equity markets. In addition, the risk remains that there could be a number of follow-on effects from the credit crisis on our business, including the insolvency of key outsourcing partners or suppliers or their inability to obtain credit to finance development and/or manufacture products resulting in product delays; inability of customers, including channel partners, to obtain credit to finance purchases of our products and/or customer, including channel partner, insolvencies; and failure of derivative counterparties and other financial institutions negatively impacting our treasury operations. Uncertainty about current global economic conditions could also continue to increase the volatility of our stock price.

Our quarterly operating results will likely fluctuate in the future, which could cause rapid declines in our stock price.

As our business continues to grow, we believe that our quarterly operating results will be subject to greater fluctuation due to various factors, many of which are beyond our control. Factors that may affect quarterly operating results in the future include:

Accordingly, it is difficult for us to accurately forecast our growth and results of operations on a quarterly basis. If we fail to meet expectations of investors or analysts, our stock price may fall rapidly and without notice. Furthermore, the fluctuation of quarterly operating results may render less meaningful period-to-period comparisons of our operating results, and you should not rely upon them as an indication of future performance.

17

Table of Contents

Our future financial performance will depend on the timely introduction and widespread acceptance of new server solutions and increased functionality of our existing server solutions.

Our future financial performance will depend on our ability to meet customer specifications and requirements by enhancing our current server solutions and developing server solutions with new and better functionality. The success of new features and new server solutions depends on several factors, including their timely introduction and market acceptance. We may not be successful in developing enhancements or new server solutions, or in timely bringing them to market. Customers may also defer purchases of our existing products pending the introduction of anticipated new products. For example, we experienced customer order delays in advance of Intel’s Nehalem microprocessor release at the end of the quarter ended March 31, 2009. If our new server solutions are not competitive with solutions offered by other vendors, we may not be perceived as a technology leader and could miss market opportunities. If we are unable to enhance the functionality of our server solutions or introduce new server solutions which achieve widespread market acceptance, our reputation will be damaged, the value of our brand will diminish, and our business will suffer. In addition, uncertainties about the timing and nature of new features and products could result in increases in our research and development expenses with no assurance of future sales.

We may not be able to successfully manage our planned growth and expansion.

Over time we expect to continue to make investments to pursue new customers and expand our product offerings to grow our business rapidly. In connection with this growth, we expect that our annual operating expenses will increase significantly if the economy continues to improve and as we invest in sales and marketing, research and development, manufacturing and production infrastructure, and strengthen customer service and support resources for our customers. Our failure to expand operational and financial systems timely or efficiently could result in additional operating inefficiencies, which could increase our costs and expenses more than we had planned and prevent us from successfully executing our business plan. We may not be able to offset the costs of operation expansion by leveraging the economies of scale from our growth in negotiations with our suppliers and contract manufacturers. Additionally, if we do increase our operating expenses in anticipation of the growth of our business and this growth does not meet our expectations, our financial results will be negatively impacted.

If our business grows, we will have to manage additional product design projects, materials procurement processes, and sales efforts and marketing for an increasing number of SKUs, as well as expand the number and scope of our relationships with suppliers, distributors and end customers. If we fail to manage these additional responsibilities and relationships successfully, we may incur significant costs, which may negatively impact our operating results.

Additionally, in our efforts to be first to market with new products with innovative functionality and features, we may devote significant research and development resources to products and product features for which a market does not develop quickly, or at all. If we are not able to predict market trends accurately, we may not benefit from such research and development activities, and our results of operations may suffer.

During fiscal 2010 and 2011, we began to significantly increase our operations in Taiwan and the Netherlands, in part to enable us to manufacture products and provide service closer to our customers’ locations in Europe and Asia. If we fail to effectively manage the transition of manufacturing and service operations to these locations or if we misjudge our ability to utilize this additional capacity, our gross margin and results of operations may suffer.

We may encounter difficulties with our ERP Systems.

As we grow our business we will need to enhance our enterprise resource planning, or ERP, System or acquire and implement a new system. Many companies have experienced delays and difficulties with the implementation of new or changed ERP systems that have had a negative effect on their business. Any disruptions, delays or deficiencies in the design and implementation of a revised or new ERP system could result

18

Table of Contents

in potentially much higher costs than we had anticipated and could adversely affect our ability to develop new products, provide services, fulfill contractual obligations, file reports with the SEC in a timely manner and/or otherwise operate our business, or otherwise impact our controls environment. Any of these consequences could have an adverse effect on our results of operations and financial condition.

The market in which we participate is highly competitive, and if we do not compete effectively, we may not be able to increase our market penetration, grow our net sales or improve our gross margins.

The market for server solutions is intensely competitive and rapidly changing. Barriers to entry in our market are relatively low and we expect increased challenges from existing as well as new competitors. Some of our principal competitors offer server solutions at a lower price, which has resulted in pricing pressures on sales of our server solutions. We expect further downward pricing pressure from our competitors and expect that we will have to price some of our server solutions aggressively to increase our market share with respect to those products, particularly for datacenter customers. If we are unable to maintain the margins on our server solutions, our operating results could be negatively impacted. In addition, if we do not develop new innovative server solutions, or enhance the reliability, performance, efficiency and other features of our existing server solutions, our customers may turn to our competitors for alternatives. In addition, pricing pressures and increased competition generally may also result in reduced sales, lower margins or the failure of our products to achieve or maintain widespread market acceptance, any of which could have a material adverse effect on our business, results of operations and financial condition.

Our principal competitors include global technology companies such as Dell, Inc., Hewlett-Packard Company, IBM and Intel. In addition, we also compete with a number of smaller vendors who also sell application optimized servers and original design manufacturers, or ODMs, such as Quanta Computer Incorporated. ODMs sell server solutions marketed or sold under a third party brand.

Many of our competitors enjoy substantial competitive advantages, such as:

As a result, our competitors may be able to respond more quickly and effectively than we can to new or changing opportunities, technologies, standards or customer requirements. Competitors may seek to copy our innovations and use cost advantages from greater size to compete aggressively with us on price. Certain customers are also current or prospective competitors and as a result, assistance that we provide to them as customers may ultimately result in increased competitive pressure against us. Furthermore, because of these advantages, even if our application optimized server solutions are more effective than the products that our competitors offer, potential customers might accept competitive products in lieu of purchasing our products. The challenges we face from larger competitors will become even greater if consolidation or collaboration between or among our competitors occurs in our industry. For all of these reasons, we may not be able to compete successfully against our current or future competitors, and if we do not compete effectively, our ability to increase our net sales may be impaired.

19

Table of Contents

As we increasingly target larger customers, our customer base may become less diversified, our cost of sales may increase, and our sales may be less predictable.

We expect that as our business continues to grow, we will be increasingly dependent upon larger sales to maintain our rate of growth and that selling our server solutions to larger customers will create new challenges. However, if certain customers buy our products in greater volumes, and their business becomes a larger percentage of our net sales, we may grow increasingly dependent on those customers to maintain our growth. If our largest customers do not purchase our products at the levels or in the timeframes that we expect, our ability to maintain or grow our net sales will be adversely affected.

Additionally, as we and our distribution partners focus increasingly on selling to larger customers and attracting larger orders, we expect greater costs of sales. Our sales cycle may become longer and more expensive, as larger customers typically spend more time negotiating contracts than smaller customers. Larger customers often seek to gain greater pricing concessions, as well as greater levels of support in the implementation and use of our server solutions. These factors can result in lower margins for our products.

Increased sales to larger companies may also cause fluctuations in results of operations. A larger customer may seek to fulfill all or substantially all of its requirements in a single order, and not make another purchase for a significant period of time. Accordingly, a significant increase in revenue during the period in which we recognize the revenue from the sale may be followed by a period of time during which the customer purchases none or few of our products. A significant decline in net sales in periods following a significant order could adversely affect our stock price.

We must work closely with our suppliers to make timely new product introductions.

We rely on our close working relationships with our suppliers, including Intel, AMD and Nvidia, to anticipate and deliver new products on a timely basis when new generation materials and core components are made available. Intel, AMD and Nvidia are the only suppliers of the microprocessors we use in our server systems. If we are not able to maintain our relationships with our suppliers or continue to leverage their research and development capabilities to develop new technologies desired by our customers, our ability to quickly offer advanced technology and product innovations to our customers would be impaired. We have no long term agreements that obligate our suppliers to continue to work with us or to supply us with products.

Our suppliers’ failure to improve the functionality and performance of materials and core components for our products may impair or delay our ability to deliver innovative products to our customers.

We need our material and core component suppliers, such as Intel, AMD and Nvidia, to provide us with core components that are innovative, reliable and attractive to our customers. Due to the pace of innovation in our industry, many of our customers may delay or reduce purchase decisions until they believe that they are receiving best of breed products that will not be rendered obsolete by an impending technological development. Accordingly, demand for new server systems that incorporate new products and features is significantly impacted by our suppliers’ new product introduction schedules and the functionality, performance and reliability of those new products. If our materials and core component suppliers fail to deliver new and improved materials and core components for our products, we may not be able to satisfy customer demand for our products in a timely manner, or at all. If our suppliers’ components do not function properly, we may incur additional costs and our relationships with our customers may be adversely affected.

As our business grows and if the economy does not improve, we expect that we may be exposed to greater customer credit risks.

Historically, we have offered limited credit terms to our customers. As our customer base expands, as our orders increase in size, and as we obtain more direct customers, we expect to offer increased credit terms and flexible payment programs to our customers. Doing so may subject us to increased credit risk, higher accounts

20

Table of Contents

receivable with longer days outstanding, and increases in charges or reserves, which could have a material adverse effect on our business, results of operations and financial condition. Likewise, if the economic recovery does not continue, we could be exposed to greater credit risk.

Our ability to develop our brand is critical to our ability to grow.

We believe that acceptance of our server solutions by an expanding customer base depends in large part on increasing awareness of the Supermicro brand and that brand recognition will be even more important as competition in our market develops. In particular, we expect an increasing proportion of our sales to come from sales of server systems, the sales of which we believe may be particularly impacted by brand strength. Successful promotion of our brand will depend largely on the effectiveness of our marketing efforts and on our ability to develop reliable and useful products at competitive prices. To date, we have not devoted significant resources to building our brand, and have limited experience in increasing customer awareness of our brand. Our future brand promotion activities, including any expansion of our cooperative marketing programs with strategic partners, may involve significant expense and may not generate desired levels of increased revenue, and even if such activities generate some increased revenue, such increased revenue may not offset the expenses we incurred in endeavoring to build our brand. If we fail to successfully promote and maintain our brand, or incur substantial expenses in our attempts to promote and maintain our brand, we may fail to attract enough new customers or retain our existing customers to the extent necessary to realize a sufficient return on our brand-building efforts, and as a result our operating results and financial condition could suffer.

We principally rely on indirect sales channels for the sale and distribution of our products and any disruption in these channels could adversely affect our sales.

Historically, a majority of our revenues have resulted from sales of our products through third party distributors and resellers, which sales accounted for 56.1%, 66.7% and 64.9% of our net sales in fiscal years 2011, 2010 and 2009, respectively. We depend on our distributors to assist us in promoting market acceptance of our products and anticipate that a majority of our revenues will continue to result from sales through indirect channels. To maintain and potentially increase our revenue and profitability, we will have to successfully preserve and expand our existing distribution relationships as well as develop new distribution relationships. Our distributors also sell products offered by our competitors and may elect to focus their efforts on these sales. If our competitors offer our distributors more favorable terms or have more products available to meet the needs of their customers, or utilize the leverage of broader product lines sold through the distributors, those distributors may de-emphasize or decline to carry our products. In addition, our distributors’ order decision-making process is complex and involves several factors, including end customer demand, warehouse allocation and marketing resources, which can make it difficult to accurately predict total sales for the quarter until late in the quarter. We also do not control the pricing or discounts offered by distributors to end customers. To maintain our participation in distributors’ marketing programs, in the past we have provided cooperative marketing arrangements or made short-term pricing concessions.

The discontinuation of cooperative marketing arrangements or pricing concessions could have a negative effect on our business. Our distributors could also modify their business practices, such as payment terms, inventory levels or order patterns. If we are unable to maintain successful relationships with distributors or expand our distribution channels or we experience unexpected changes in payment terms, inventory levels or other practices by our distributors, our business will suffer.

We may be unable to accurately predict future sales through our distributors, which could harm our ability to efficiently manage our resources to match market demand.

Since a significant portion of our sales are made through domestic and international distributors, our financial results, quarterly product sales, trends and comparisons are affected by fluctuations in the buying patterns of end customers and our distributors, and by the changes in inventory levels of our products held by these distributors. We generally record revenue based upon a “sell-in” model which means that we generally

21

Table of Contents

record revenue upon shipment to our distributors. For more information regarding our revenue recognition policies, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Critical Accounting Policies.” While we attempt to assist our distributors in maintaining targeted stocking level of our products, we may not consistently be accurate or successful. This process involves the exercise of judgment and use of assumptions as to future uncertainties including end customer demand. Our distributors also have various rights to return products which could, among other things, result in our having to repurchase inventory which has declined in value or is obsolete. Consequently, actual results could differ from our estimates. Inventory levels of our products held by our distributors may exceed or fall below the levels we consider desirable on a going-forward basis. This could adversely affect our distributors or our ability to efficiently manage or invest in internal resources, such as manufacturing and shipping capacity, to meet the demand for our products.

Any failure to adequately expand or retain our sales force will impede our growth.

Though we expect to continue to rely primarily on third party distributors to sell our server solutions, we expect that, over time, our direct sales force will grow. Competition for direct sales personnel with the advanced sales skills and technical knowledge we need is intense. Our ability to grow our revenue in the future will depend, in large part, on our success in recruiting, training, retaining and successfully managing sufficient qualified direct sales personnel. We have traditionally experienced greater turnover in our sales and marketing personnel as compared to other departments. New hires require significant training and may take six months or longer before they reach full productivity. Our recent hires and planned hires may not become as productive as we would like, and we may be unable to hire sufficient numbers of qualified individuals in the future in the markets where we do business. If we are unable to hire, develop and retain sufficient numbers of productive sales personnel, sales of our server solutions will suffer.

Our direct sales efforts may create confusion for our end customers and harm our relationships with our distributors and OEMs.

Though our direct sales efforts have historically been limited and focused on customers who typically do not buy from distributors or OEMs, we expect our direct sales force to grow as our business grows. As our direct sales force becomes larger, our direct sales efforts may lead to conflicts with our distributors and OEMs, who may view our direct sales efforts as undermining their efforts to sell our products. If a distributor or OEM deems our direct sales efforts to be inappropriate, the distributor or OEM may not effectively market our products, may emphasize alternative products from competitors, or may seek to terminate our business relationship. Disruptions in our distribution channels could cause our revenues to decrease or fail to grow as expected. Our failure to implement an effective direct sales strategy that maintains and expands our relationships with our distributors and OEMs could lead to a decline in sales and adversely affect our results of operations.

If we are required to change the timing of our revenue recognition, our net sales and net income could decrease.

We currently record revenue based upon a “sell-in” model with revenues generally recorded upon shipment of products to our distributors. This is in contrast to a “sell-through” model pursuant to which revenues are generally recognized upon sale of products by distributors to their customers. This requires that we maintain a reserve to cover the estimated costs of any returns or exercises of stock rotation rights, which we estimate primarily based on our historical experience. If facts and circumstances change such that the rate of returns of our products exceeds our historical experience, we may have to increase our reserve, which, in turn, would cause our revenue to decline. Similarly, if facts and circumstances change such that we are no longer able to determine reasonable estimates of our sales returns, we would be required to defer our revenue recognition until the point of sale from the distributors to their customers. Any such change may negatively impact our net sales or net income for particular periods and cause a decline in our stock price. For additional information regarding our revenue recognition policies, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Critical Accounting Policies.”

22

Table of Contents

The average selling prices for our existing server solutions are subject to decline if customers do not continue to purchase our latest generation products, which could harm our results of operations.

As with most electronics based products, average selling prices of servers typically are highest at the time of introduction of new products, which utilize the latest technology, and tend to decrease over time as such products become commoditized and are ultimately replaced by even newer generation products. As our business continues to grow, we may increasingly be subject to this industry risk. We cannot predict the timing or amount of any decline in the average selling prices of our server solutions that we may experience in the future. In some instances, our agreements with our distributors limit our ability to reduce prices unless we make such price reductions available to them, or price protect their inventory. If we are unable to decrease per unit manufacturing costs faster than the rate at which average selling prices continue to decline, our business, financial condition and results of operations will be harmed.

Our cost structure and ability to deliver server solutions to customers in a timely manner may be adversely affected by volatility of the market for core components and materials for our products.

Prices of materials and core components utilized in the manufacture of our server solutions, such as serverboards, chassis, central processing units, or CPUs, memory and hard drives represent a significant portion of our cost of sales. We generally do not enter into long-term supply contracts for these materials and core components, but instead purchase these materials and components on a purchase order basis. Prices of these core components and materials are volatile, and, as a result, it is difficult to predict expense levels and operating results. In addition, if our business growth renders it necessary or appropriate to transition to longer term contracts with materials and core component suppliers, our costs may increase and our gross margins could correspondingly decrease.

Because we often acquire materials and core components on an as needed basis, we may be limited in our ability to effectively and efficiently respond to customer orders because of the then-current availability or the terms and pricing of materials and core components. Our industry has experienced materials shortages and delivery delays in the past, and we may experience shortages or delays of critical materials in the future. From time to time, we have been forced to delay the introduction of certain of our products or the fulfillment of customer orders as a result of shortages of materials and core components. For example, we were unable to fulfill certain orders at the end of the quarter ended June 30, 2010 due to component shortages. If shortages or delays arise, the prices of these materials and core components may increase or the materials and core components may not be available at all. In addition, in the event of shortages, some of our larger competitors may have greater abilities to obtain materials and core components due to their larger purchasing power. We may not be able to secure enough core components or materials at reasonable prices or of acceptable quality to build new products to meet customer demand, which could adversely affect our business and financial results.

In order to address market volatility, we from time to make larger investments in material and component inventory. Such investments expose us to risk for lower margins or loss on disposal of such inventory if your expectations of customer demand are incorrect and the market price of the material or component inventory decline.

We may lose sales or incur unexpected expenses relating to insufficient, excess or obsolete inventory.

As a result of our strategy to provide greater choice and customization of our products to our customers, we are required to maintain a high level of inventory. If we fail to maintain sufficient inventory, we may not be able to meet demand for our products on a timely basis, and our sales may suffer. If we overestimate customer demand for our products, we could experience excess inventory of our products and be unable to sell those products at a reasonable price, or at all. As a result, we may need to record higher inventory reserves. If we are later able to sell such products at a profit, it may increase the quarterly variances in our operating results. Additionally, the rapid pace of innovation in our industry could render significant portions of our existing inventory obsolete. Certain of our distributors and OEMs have rights to return products, limited to purchases over

23

Table of Contents

a specified period of time, generally within 60 to 90 days of the purchase, or to products in the distributor’s or OEM’s inventory at certain times, such as termination of the agreement or product obsolescence. Any returns under these arrangements could result in additional obsolete inventory. In addition, server systems, subsystems and accessories that have been customized and later returned by those of our customers and partners who have return rights or stock rotation rights may be unusable for other purposes or may require reformation at additional cost to be made ready for sale to other customers. Excess or obsolete inventory levels for these or other reasons could result in unexpected expenses or increases in our reserves against potential future charges which would adversely affect our business and financial results. For example, during fiscal years 2011, 2010 and 2009, we recorded inventory write-downs charged to cost of sales of $3.4 million, $2.6 million and $1.5 million, for excess and obsolete inventory. For additional information regarding customer return rights, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Critical Accounting Policies—Revenue Recognition.”

Our focus on internal development and customizable server solutions could delay our introduction of new products and result in increased costs.

Our strategy is to rely to a significant degree on internally developed components, even when third party components may be available. We believe this allows us to develop products with a greater range of features and functionality and allows us to develop solutions that are more customized to customer needs. However, if not properly managed, this reliance on internally developed components may be more costly than use of third party components, thereby making our products less price competitive or reducing our margins. In addition, our reliance on internal development may lead to delays in the introduction of new products and impair our ability to introduce products rapidly to market. We may also experience increases in our inventory costs and obsolete inventory, thereby reducing our margins.

Our research and development expenditures, as a percentage of our net sales, are considerably higher than many of our competitors and our earnings will depend upon maintaining revenues and margins that offset these expenditures.

Our strategy is to focus on being consistently rapid-to-market with flexible and customizable server systems that take advantage of our own internal development and the latest technologies offered by microprocessor manufacturers and other component vendors. Consistent with this strategy, we spend higher amounts, as a percentage of revenues, on research and development costs than many of our competitors. If we can not sell our products in sufficient volume and with adequate gross margins to compensate for such investment in research and development, our earnings may be materially and adversely affected.

If our limited number of contract manufacturers or suppliers of materials and core components fail to meet our requirements, we may be unable to meet customer demand for our products, which could decrease our revenues and earnings.

We purchase many sophisticated materials and core components from one or a limited number of qualified suppliers and rely on a limited number of contract manufacturers to provide value added design, manufacturing, assembly and test services. We generally do not have long-term agreements with these vendors, and instead obtain key materials and services through purchase order arrangements. We have no contractual assurances from any contract manufacturer that adequate capacity will be available to us to meet future demand for our products.

Consequently, we are vulnerable to any disruptions in supply with respect to the materials and core components provided by limited-source suppliers, and we are at risk of being harmed by discontinuations of design, manufacturing, assembly or testing services from our contract manufacturers. We have occasionally experienced delivery delays from our suppliers and contract manufacturers because of high industry demand or because of inability to meet our quality or delivery requirements. For example, in the past we experienced delays in the delivery of printed circuit board material as a result of the loss of two of our five printer circuit board

24

Table of Contents

vendors. One of the vendors filed for bankruptcy and the other changed its business model and ceased supplying us. The delays in delivery of the materials resulted in a reduction of net sales for the quarter of approximately two to three million dollars. If our relationships with our suppliers and contract manufactures are negatively impacted by late payments or other issues, we may not receive timely delivery of materials and core components. If we were to lose any of our current supply or contract manufacturing relationships, the process of identifying and qualifying a new supplier or contract manufacturer who will meet our quality and delivery requirements, and who will appropriately safeguard our intellectual property, may require a significant investment of time and resources, adversely affecting our ability to satisfy customer purchase orders and delaying our ability to rapidly introduce new products to market. Similarly, if any of our suppliers were to cancel or materially change contracts or commitments to us or fail to meet the quality or delivery requirements needed to satisfy customer demand for our products, our reputation and relationships with customers could be damaged. We could lose orders, be unable to develop or sell some products cost-effectively or on a timely basis, if at all, and have significantly decreased revenues, margins and earnings, which would have a material adverse effect on our business.

The recent earthquake and tsunami in Japan has disrupted the global supply chain for components manufactured in Japan, some of which are incorporated in our products or included in the end user products of our customers. Due to cross dependencies, supply chain disruptions stemming from the occurrences in Japan could negatively impact the demand for our products or our ability to supply products, including, for example, if we are unable to obtain sufficient supply of our components required for our products or our customers are unable to obtain sufficient supply of other components required for their end products. While we have increased our inventory to reduce risk of supply chain disruption we cannot assure that our ability to obtain components on a timely basis will not be adversely impacted.

Our failure to deliver high quality server solutions could damage our reputation and diminish demand for our products.

Our server solutions are critical to our customers’ business operations. Our customers require our server solutions to perform at a high level, contain valuable features and be extremely reliable. The design of our server solutions is sophisticated and complex, and the process for manufacturing, assembling and testing our server solutions is challenging. Occasionally, our design or manufacturing processes may fail to deliver products of the quality that our customers require. For example, in the past a vendor provided us with a defective capacitor that failed under certain heavy use applications. As a result, our product needed to be repaired. Though the vendor agreed to pay for a large percentage of the costs of the repairs, we incurred costs in connection with the recall and diverted resources from other projects.

New flaws or limitations in our server solutions may be detected in the future. Part of our strategy is to bring new products to market quickly, and first-generation products may have a higher likelihood of containing undetected flaws. If our customers discover defects or other performance problems with our products, our customers’ businesses, and our reputation, may be damaged. Customers may elect to delay or withhold payment for defective or underperforming server solutions, request remedial action, terminate contracts for untimely delivery, or elect not to order additional server solutions, which could result in an increase in our provision for doubtful accounts, an increase in collection cycles for accounts receivable or subject us to the expense and risk of litigation. We may incur expense in recalling, refurbishing or repairing defective server solutions. If we do not properly address customer concerns about our products, our reputation and relationships with our customers may be harmed. For all of these reasons, customer dissatisfaction with the quality of our products could substantially impair our ability to grow our business.

Conflicts of interest may arise between us and Ablecom Technology Inc., one of our major contract manufacturers, and those conflicts may adversely affect our operations.

We use Ablecom, a related party, for contract design and manufacturing coordination support. We work with Ablecom to optimize modular designs for our chassis and certain of other components. Our purchases from

25

Table of Contents

Ablecom represented 19.6%, 20.5% and 22.1% of our cost of sales for fiscal years 2011, 2010 and 2009, respectively. Ablecom’s sales to us constitute a substantial majority of Ablecom’s net sales. Ablecom is a privately-held Taiwan-based company.

Steve Liang, Ablecom’s Chief Executive Officer and largest shareholder, is the brother of Charles Liang, our President, Chief Executive Officer and Chairman of the Board. Charles Liang, and his spouse, Chiu-Chu (Sara) Liu Liang, our Vice President of Operations, Treasurer and director, jointly own 10.5% of Ablecom’s outstanding common stock. Mr. Charles Liang, Ms. Liang, Mr. Steve Liang and relatives of these individuals own 46.4% of Ablecom’s outstanding common stock. Mr. and Mrs. Charles Liang, as directors, officers and significant stockholders of the Company, have considerable influence over the management of our business relationships. Accordingly, we may be disadvantaged by their economic interests as stockholders of Ablecom and their personal relationship with Ablecom’s Chief Executive Officer. We may not negotiate or enforce contractual terms as aggressively with Ablecom as we might with an unrelated party, and the commercial terms of our agreements may be less favorable than we might obtain in negotiations with third parties. If our business dealings with Ablecom are not as favorable to us as arms-length transactions, our results of operations may be harmed.

If Steve Liang ceases to have significant influence over Ablecom, or if those of our stockholders who hold shares of Ablecom cease to have a significant amount of the outstanding shares of Ablecom, the terms and conditions of our agreements with Ablecom may not be as favorable as those in our existing contracts. As a result, our costs could increase and adversely affect our margins and results of operations.

Our relationship with Ablecom may allow us to benefit from favorable pricing which may result in reported results more favorable than we might report in the absence of our relationship.

Although we generally re-negotiate the price of products that we purchase from Ablecom on a quarterly basis, pursuant to our agreements with Ablecom either party may re-negotiate the price of products for each order. As a result of our relationship with Ablecom, it is possible that Ablecom may in the future sell products to us at a price lower than we could obtain from an unrelated third party supplier. This may result in future reporting of gross profit as a percentage of net sales that is in excess of what we might have obtained absent our relationship with Ablecom.

Our reliance on Ablecom could be subject to risks associated with our reliance on a limited source of contract manufacturing services and inventory warehousing.

We continue to maintain our manufacturing relationship with Ablecom in Asia. In order to provide a larger volume of contract manufacturing services for us, Ablecom will continue to warehouse for us an increasing number of components and subassemblies manufactured by multiple suppliers prior to shipment to our facilities in the U.S. and Europe. We also anticipate that we will continue to lease office space from Ablecom in Taiwan to support the research and development efforts we are undertaking.

If we or Ablecom fail to manage the contract manufacturing services and warehouse operations in Asia, we may experience delays in our ability to fulfill customer orders. Similarly, if Ablecom’s facility in Asia is subject to damage, destruction or other disruptions, our inventory may be damaged or destroyed, and we may be unable to find adequate alternative providers of contract manufacturing services in the time that we or our customers require. We could lose orders and be unable to develop or sell some products cost-effectively or on a timely basis, if at all.

Currently, we purchase contract manufacturing services primarily for our chassis and power supply products from Ablecom. If our commercial relationship with Ablecom were to deteriorate or terminate, establishing direct relationships with those entities supplying Ablecom with key materials for our products or identifying and negotiating agreements with alternative providers of warehouse and contract manufacturing services might take a

26

Table of Contents

considerable amount of time and require a significant investment of resources. Pursuant to our agreements with Ablecom and subject to certain exceptions, Ablecom has the exclusive right to be our supplier of the specific products developed under such agreements. As a result, if we are unable to obtain such products from Ablecom on terms acceptable to us, we may need to identify a new supplier, change our design and acquire new tooling, all of which could result in delays in our product availability and increased costs. If we need to use other suppliers, we may not be able to establish business arrangements that are, individually or in the aggregate, as favorable as the terms and conditions we have established with Ablecom. If any of these things should occur, our net sales, margins and earnings could significantly decrease, which would have a material adverse effect on our business.

Our growth into markets outside the United States exposes us to risks inherent in international business operations.

We market and sell our systems and components both domestically and outside the United States. We intend to expand our international sales efforts, especially into Asia and are expanding our business operations in Europe and Asia, particularly in the Netherlands, Taiwan and China. Our international expansion efforts may not be successful. Our international operations expose us to risks and challenges that we would otherwise not face if we conducted our business only in the United States, such as:

These factors could limit our future international sales or otherwise adversely impact our operations.

We have in the past entered into plea and settlement agreements with the government relating to violations of export control and related laws; if we fail to comply with laws and regulations restricting dealings with sanctioned countries, we may be subject to future civil or criminal penalties, which may have a material adverse effect on our business or ability to do business outside the U.S.

In 2006, we entered into certain plea and settlement agreement with government agencies relating to export control and related law violations for activities that occurred in the 2001 to 2003 timeframe. We believe we are currently in compliance in all material respects with applicable export related laws and regulations. However, if our export compliance program is not effective, or if we are subject to any future claims regarding violation of export control and economic sanctions laws, we could be subject to civil or criminal penalties, which could lead to a material fine or other sanctions, including loss of export privileges, that may have a material adverse effect

27

Table of Contents

on our business, financial condition, results of operation and future prospects. In addition, these plea and settlement agreements and any future violations could have an adverse impact on our ability to sell our products to U.S. federal, state and local government and related entities.

Any failure to protect our intellectual property rights, trade secrets and technical know-how could impair our brand and our competitiveness.

Our ability to prevent competitors from gaining access to our technology is essential to our success. If we fail to protect our intellectual property rights adequately, we may lose an important advantage in the markets in which we compete. Trademark, patent, copyright and trade secret laws in the United States and other jurisdictions as well as our internal confidentiality procedures and contractual provisions are the core of our efforts to protect our proprietary technology and our brand. Our patents and other intellectual property rights may be challenged by others or invalidated through administrative process or litigation, and we may initiate claims or litigation against third parties for infringement of our proprietary rights. Such administrative proceedings and litigation are inherently uncertain and divert resources that could be put towards other business priorities. We may not be able to obtain a favorable outcome and may spend considerable resources in our efforts to defend and protect our intellectual property.

Furthermore, legal standards relating to the validity, enforceability and scope of protection of intellectual property rights are uncertain. Effective patent, trademark, copyright and trade secret protection may not be available to us in every country in which our products are available. The laws of some foreign countries may not be as protective of intellectual property rights as those in the United States, and mechanisms for enforcement of intellectual property rights may be inadequate.

Accordingly, despite our efforts, we may be unable to prevent third parties from infringing upon or misappropriating our intellectual property and using our technology for their competitive advantage. Any such infringement or misappropriation could have a material adverse effect on our business, results of operations and financial condition.

Resolution of claims that we have violated or may violate the intellectual property rights of others could require us to indemnify our customers, resellers or vendors, redesign our products, or pay significant royalties to third parties, and materially harm our business.

Our industry is marked by a large number of patents, copyrights, trade secrets and trademarks and by frequent litigation based on allegations of infringement or other violation of intellectual property rights. Third-parties have in the past sent us correspondence regarding their intellectual property and in the future we may receive claims that our products infringe or violate third parties’ intellectual property rights. In addition, increasingly non-operating companies are purchasing patents and bringing claims against technology companies. We settled one claim in fiscal year 2011. Successful intellectual property claims against us from others could result in significant financial liability or prevent us from operating our business or portions of our business as we currently conduct it or as we may later conduct it. In addition, resolution of claims may require us to redesign our technology, to obtain licenses to use intellectual property belonging to third parties, which we may not be able to obtain on reasonable terms, to cease using the technology covered by those rights, and to indemnify our customers, resellers or vendors. Any claim, regardless of its merits, could be expensive and time consuming to defend against, and divert the attention of our technical and management resources.

If we lose Charles Liang, our President, Chief Executive Officer and Chairman, or any other key employee or are unable to attract additional key employees, we may not be able to implement our business strategy in a timely manner.

Our future success depends in large part upon the continued service of our executive management team and other key employees. In particular, Charles Liang, our President, Chief Executive Officer and Chairman of the

28

Table of Contents

Board, is critical to the overall management of our company as well as to the development of our culture and our strategic direction. Mr. Liang co-founded our company and has been our Chief Executive Officer since our inception. His experience in running our business and his personal involvement in key relationships with suppliers, customers and strategic partners are extremely valuable to our company. We currently do not have a succession plan for the replacement of Mr. Liang if it were to become necessary. Additionally, we are particularly dependent on the continued service of our existing research and development personnel because of the complexity of our products and technologies. Our employment arrangements with our executives and employees do not require them to provide services to us for any specific length of time, and they can terminate their employment with us at any time, with or without notice, without penalty. The loss of services of any of these executives or of one or more other key members of our team could seriously harm our business.

To execute our growth plan, we must attract additional highly qualified personnel, including additional engineers and executive staff. Competition for qualified personnel is intense, especially in San Jose, where we are headquartered. We have experienced in the past and may continue to experience difficulty in hiring and retaining highly skilled employees with appropriate qualifications. In particular, we are currently working to add personnel in our finance, accounting and general administration departments, which have historically had limited budgets and staffing. If we are unable to attract and integrate additional key employees in a manner that enables us to scale our business and operations effectively, or if we do not maintain competitive compensation policies to retain our employees, our ability to operate effectively and efficiently could be limited.

Backlog does not provide a substantial portion of our net sales in any quarter.

Our net sales are difficult to forecast because we do not have sufficient backlog of unfilled orders to meet our quarterly net sales targets at the beginning of a quarter. Rather, a majority of our net sales in any quarter depend upon customer orders that we receive and fulfill in that quarter. Because our expense levels are based in part on our expectations as to future net sales and to a large extent are fixed in the short term, we might be unable to adjust spending in time to compensate for any shortfall in net sales. Accordingly, any significant shortfall of revenues in relation to our expectations would harm our operating results.

Our business and operations are especially subject to the risks of earthquakes other natural catastrophic events.

Our corporate headquarters, including our most significant research and development and manufacturing operations, are located in the Silicon Valley area of Northern California, a region known for seismic activity. We do not currently have a comprehensive disaster recovery program and as a result, a significant natural disaster, such as an earthquake, could have a material adverse impact on our business, operating results, and financial condition. Although we are in the process of preparing such a program, there is no assurance that it will be effective in the event of such a disaster.

We invest in auction rate securities that are subject to market risk and the recent problems in the financial markets could adversely affect the value and liquidity of our assets.

As of June 30, 2011, we held $5.2 million of auction rate securities, net of unrealized losses, representing our interest in auction rate preferred shares in a closed end mutual fund invested in municipal securities and auction rate student loans guaranteed by the Federal Family Education Loan Program; such auction rate securities were rated AAA or BAA at June 30, 2011. These auction rate preferred shares have no stated maturity date and the stated maturity dates for these auction rate student loans range from 2035 to 2040.

Based on our assessment of fair value at June 30, 2011, we have recorded an accumulated unrealized loss of $0.2 million, net of deferred income taxes, on long-term auction rate securities. The unrealized loss was deemed to be temporary and has been recorded as a component of accumulated other comprehensive loss.

29

Table of Contents

Although we have determined that we will not likely be required to sell the securities before their anticipated recovery and we have the intent and ability to hold our investments until successful auctions occur, these investments are not currently liquid and in the event we need to access these funds, we will not be able to do so without a loss of principal. There can be no assurances that these investments will be settled in the short term or that they will not become other-than-temporarily impaired subsequent to June 30, 2011, as the market for these investments is presently uncertain. In any event, we do not have a present need to access these funds for operational purposes. We will continue to monitor and evaluate these investments as there is no assurance as to when the market for these investments will allow us to liquidate them. We may be required to record impairment charges in periods subsequent to June 30, 2011 with respect to these securities and, if a liquid market does not develop for these investments, we could be required to hold them to maturity.

If we are unable to favorably assess the effectiveness of our internal control over financial reporting, or if our independent auditors are unable to provide an unqualified attestation report on our internal control over financial reporting, our stock price could be adversely affected.

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, or Section 404, our management is required to report on the effectiveness of our internal control over financial reporting in our annual reports. In addition, our independent auditors must attest to and report on the effectiveness of our internal control over financial reporting. The rules governing the standards that must be met for management to assess our internal control over financial reporting are complex, and require significant documentation, testing and possible remediation. As a result, our efforts to comply with Section 404 have required the commitment of significant managerial and financial resources. As we are committed to maintaining high standards of public disclosure, our efforts to comply with Section 404 are ongoing, and we are continuously in the process of reviewing, documenting and testing our internal control over financial reporting, which will result in continued commitment of significant financial and managerial resources. Although we strive to maintain effective internal controls over financial reporting in order to prevent and detect material misstatements in our annual and quarterly financial statements and prevent fraud, we cannot assure that such efforts will be effective. If we fail to maintain effective internal controls in future periods, our operating results, financial position and stock price could be adversely affected.

Our operations involve the use of hazardous and toxic materials, and we must comply with environmental laws and regulations, which can be expensive, and may affect our business and operating results.

We are subject to federal, state and local regulations relating to the use, handling, storage, disposal and human exposure to hazardous and toxic materials. If we were to violate or become liable under environmental laws in the future as a result of our inability to obtain permits, human error, accident, equipment failure or other causes, we could be subject to fines, costs, or civil or criminal sanctions, face third party property damage or personal injury claims or be required to incur substantial investigation or remediation costs, which could be material, or experience disruptions in our operations, any of which could have a material adverse effect on our business. In addition, environmental laws could become more stringent over time imposing greater compliance costs and increasing risks and penalties associated with violations, which could harm our business.

We also face increasing complexity in our product design as we adjust to new and future requirements relating to the materials composition of our products, including the restrictions on lead and other hazardous substances applicable to specified electronic products placed on the market in the European Union (Restriction on the Use of Hazardous Substances Directive 2002/95/EC, also known as the RoHS Directive). We are also subject to laws and regulations such as California’s “Proposition 65” which requires that clear and reasonable warnings be given to consumers who are exposed to certain chemicals deemed by the State of California to be dangerous, such as lead. We expect that our operations will be affected by other new environmental laws and regulations on an ongoing basis. Although we cannot predict the ultimate impact of any such new laws and regulations, they will likely result in additional costs, and could require that we change the design and/or manufacturing of our products, any of which could have a material adverse effect on our business.

30

Table of Contents

Risks Related to Owning Our Stock

The trading price of our common stock is likely to be volatile, and you might not be able to sell your shares at or above the price at which you purchased the shares.

The trading prices of technology company securities historically have been highly volatile and the trading price of our common stock has been and is likely to continue to be subject to wide fluctuations. Factors, in addition to those outlined elsewhere in this filing, that may affect the trading price of our common stock include:

Future sales of shares by existing stockholders could cause our stock price to decline.

Attempts by existing stockholders to sell substantial amounts of our common stock in the public market could cause the trading price of our common stock to decline significantly. As of June 30, 2011, we had 40.7 million shares of common stock outstanding, net of treasury stock. All of these shares are eligible for sale in the public market, including 11.6 million shares held by directors, executive officers and other affiliates, which are subject to volume limitations under Rule 144 under the Securities Act. In addition, 10.5 million shares subject to outstanding options and reserved for future issuance under our stock option plans are eligible for sale in the public market to the extent permitted by the provisions of various vesting agreements. If these additional shares are sold, or if it is perceived that they will be sold in the public market, the trading price of our common stock could decline.

If securities analysts do not publish research or reports about our business or if they downgrade our stock, the price of our stock could decline.

The research and reports that industry or financial analysts publish about us or our business likely have an effect on the trading price of our common stock. If an industry analyst decides not to cover our company, or if an industry analyst decides to cease covering our company at some point in the future, we could lose visibility in the market, which in turn could cause our stock price to decline. If an industry analyst downgrades our stock, our stock price would likely decline rapidly in response.

31

Table of Contents

The concentration of our capital stock ownership with insiders will likely limit your ability to influence corporate matters.

As of August 22, 2011, our executive officers, directors, current five percent or greater stockholders and affiliated entities together beneficially owned 32.8 percent of our common stock, net of treasury stock. As a result, these stockholders, acting together, will have significant influence over all matters that require approval by our stockholders, including the election of directors and approval of significant corporate transactions. Corporate action might be taken even if other stockholders oppose them. This concentration of ownership might also have the effect of delaying or preventing a change of control of our company that other stockholders may view as beneficial.

Provisions of our certificate of incorporation and bylaws and Delaware law might discourage, delay or prevent a change of control of our company or changes in our management and, as a result, depress the trading price of our common stock.

Our certificate of incorporation and bylaws contain provisions that could discourage, delay or prevent a change in control of our company or changes in our management that the stockholders of our company may deem advantageous. These provisions:

In addition, we are subject to Section 203 of the Delaware General Corporation Law, which, subject to some exceptions, prohibits “business combinations” between a Delaware corporation and an “interested stockholder,” which is generally defined as a stockholder who becomes a beneficial owner of 15% or more of a Delaware corporation’s voting stock for a three-year period following the date that the stockholder became an interested stockholder. Section 203 could have the effect of delaying, deferring or preventing a change in control that our stockholders might consider to be in their best interests.

These anti-takeover defenses could discourage, delay or prevent a transaction involving a change in control of our company. These provisions could also discourage proxy contests and make it more difficult for stockholders to elect directors of their choosing and cause us to take corporate actions other than those stockholders desire.

We do not expect to pay any cash dividends for the foreseeable future.

We do not anticipate that we will pay any cash dividends to holders of our common stock in the foreseeable future. Accordingly, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investment. Investors seeking cash dividends in the foreseeable future should not purchase our common stock.

Not applicable.

32

Table of Contents

Our principal executive offices, research and development center and production operations are located in San Jose, California where we own approximately 518,000 square feet of office and manufacturing space subject to existing mortgage loan and line of credit with $18.3 million remaining outstanding as of June 30, 2011. In fiscal year 2008, we began leasing approximately 246,000 square feet of warehouse in Fremont, California under a lease that expires in 2015. Our European headquarters for manufacturing and service operations is located in Denbosch, the Netherlands where we lease approximately 58,000 square feet of office space under four leases, two of which expire in 2011 and two expire in 2016. In Asia, our research and development center, manufacturing and service operations are located in an approximately 102,000 square feet facility in Taipei and Taoyuan County, Taiwan under seven leases that expire at various dates through 2012. We believe that our existing properties, including both owned and leased, are in good condition and are suitable for the conduct of our business. In August 2010, we purchased land in Taiwan, consisting of approximately 4.7 acres. The purchase price was $6.1 million. In March 2011, we drew an additional $9.9 million of the line of credit to pay $9.2 million for a deposit to purchase 2.2 acres of land in Taiwan that is adjacent to the land that was purchased in August 2010. The anticipated purchase cost of this land ranges from $5.0 million to $9.2 million and the title to the land is expected to transfer in the first half of fiscal year 2012. As the total purchase cost of the land is not known at this time, the difference between the purchase cost and the land deposit will be refunded when the title transfers to us. The construction of the Taiwan facilities and the headquarters office expansion in San Jose, California began in the fourth quarter of fiscal year 2011 and will continue through fiscal year 2012. The anticipated costs for the next twelve months to build the Taiwan facilities and the headquarters office expansion in San Jose, California are approximately $16.9 million. We plan to finance the purchase and the development through operating cash flows and additional financing from banks.

From time to time, we may be involved in various legal proceedings arising from the normal course of business activities. In our opinion, resolution of these and the above matters is not expected to have a material adverse impact on our consolidated results of operations, cash flows or our financial position. However, depending on the amount and timing, an unfavorable resolution of a matter could materially affect our future results of operations, cash flows or financial position in a particular period.

33

Table of Contents

PART II

Market Information

Our common stock has been traded on The Nasdaq Global Market under the symbol “SMCI” since our initial public offering on March 28, 2007. The following table sets forth for the periods indicated the high and low sale prices of our common stock as reported by The Nasdaq Global Market.

Dividend Policy

We have never declared or paid cash dividends on our capital stock and do not expect to pay any dividends in the foreseeable future.

Holders

The last reported sale price of our common stock on the Nasdaq Global Market on August 22, 2011 was $13.08 per share. There were 40 registered stockholders of record of our common stock on August 22, 2011. Because most of our shares are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of beneficial stockholders represented by these record holders.

Equity Compensation Plan

Please see Part III, Item 12 of this report for disclosure relating to our equity compensation plans.

34

Table of Contents

Stock Performance Graph

The following graph compares our cumulative total stockholder return on our common stock between March 29, 2007 (the date of our initial public offering) and June 30, 2011 with the cumulative return of the Nasdaq Computer Index and the Nasdaq Composite Index, which both include our common stock, for the comparable period.

The graph reflects an investment of $100 in our common stock, the Nasdaq Computer Index and the Nasdaq Composite Index, on March 29, 2007, and a reinvestment of dividends, if any. The stockholder return shown on the graph below is not necessarily indicative of future performance, and we do not make or endorse any predictions as to future stockholder returns.

Comparison of March 29, 2007 to June 30, 2011 Cumulative Total Return

Among Super Micro Computer, Nasdaq Computer Index and Nasdaq Composite

Recent Sales of Unregistered Securities

None.

Issuer Purchases of Equity Securities

None.

35

Table of Contents

The following selected consolidated financial data is qualified by reference to, and should be read in conjunction with, our Consolidated Financial Statements and notes thereto in Part II, Item 8 and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7, of this Annual Report on Form 10-K. Our historical results are not necessarily indicative of the results to be expected in any future period.

36

Table of Contents

The following discussion should be read in conjunction with the consolidated financial statements and related notes which appear elsewhere in this Annual Report on Form 10-K. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those discussed below and elsewhere in this Annual Report on Form 10-K, particularly under the heading “Risk Factors.”

Overview

We are a global leader in server technology and green computing innovation. We develop and provide high performance server solutions based on an innovative, modular and open-standard architecture. Our solutions include a range of complete rackmount, workstation, storage, graphic processing unit and blade server systems, as well as subsystems and accessories which can be used by distributors, OEMs and end customers to assemble server systems. To date, we have generated the majority of our net sales from subsystems. In recent years our growth in net sales has been driven by the growth in the market for application optimized server systems. For fiscal years 2011, 2010 and 2009, net sales of optimized servers were $351.3 million, $245.2 million and $196.7 million, respectively, and net sales of subsystems and accessories were $591.3 million, $476.2 million and $309.0 million, respectively. The increase in our net sales in fiscal year 2011 compared with fiscal year 2010 was primarily attributable to the server refresh cycle and increased sales across our product lines. The growth on a percentage basis was primarily in our SuperBlade^®, GPU and storage solutions.

We commenced operations in 1993 and have been profitable every year since inception. For fiscal years 2011, 2010 and 2009, our net sales were $942.6 million, $721.4 million and $505.6 million, respectively, and our net income was $40.2 million, $26.9 million and $16.1 million, respectively. Our increase in profitability in fiscal year 2011 was primarily attributable to the increase in our gross profit resulting from our increased net sales and to a lesser extent to the lower effective tax rate resulting from the reinstatement of the Federal research and development tax credit in fiscal year 2011.

We sell our server systems and subsystems and accessories primarily through distributors and to a lesser extent to OEMs as well as through our direct sales force. For fiscal years 2011, 2010 and 2009, we derived 56.1%, 66.7% and 64.9%, respectively, of our net sales from products sold to distributors, and we derived 43.9%, 33.3% and 35.1%, respectively, from sales to OEMs and to end customers. None of our customers accounted for 10% or more of our net sales in fiscal years 2011, 2010 or 2009. For fiscal years 2011, 2010 and 2009, we derived 58.3%, 60.1% and 64.4%, respectively, of our net sales from customers in the United States. For fiscal years 2011, 2010, and 2009, we derived 41.7%, 39.9% and 35.6%, respectively, of our net sales from customers outside the United States.

We perform the majority of our research and development efforts in-house. For fiscal years 2011, 2010 and 2009, research and development expenses represented 5.1%, 5.2% and 6.8% of our net sales, respectively.

We use several suppliers and contract manufacturers to design and manufacture components in accordance with our specifications, with most final assembly and testing performed at our manufacturing facility in San Jose, California. During fiscal year 2011, we continued to invest in expanding our operations both in San Jose, California and our subsidiaries in the Netherlands and Taiwan in order to support our growth. We have increased manufacturing and service operations in the Netherlands and Taiwan to support our European and Asian customers and we plan to continue expanding our overseas manufacturing capacity through fiscal year 2012. One of our key suppliers is Ablecom, a related party, which supplies us with contract design and manufacturing support. For fiscal years 2011, 2010 and 2009, our purchases from Ablecom represented 19.6%, 20.5% and 22.1% of our cost of sales, respectively. The decrease in percentage of cost of sales in fiscal year 2011 and 2010 was primarily related to server systems sales composing a higher percentage of our net sales and a change in product mix which resulted in a higher percentage of server subsystems and accessories being purchased from other suppliers. Ablecom’s sales to us constitute a substantial majority of Ablecom’s net sales. We continue to

37

Table of Contents

maintain our manufacturing relationship with Ablecom in Asia in an effort to reduce our product costs and do not have any current plans to reduce our reliance on Ablecom product purchases. In addition to providing a larger volume of contract manufacturing services for us, Ablecom continues to warehouse for us a number of components and subassemblies manufactured by multiple suppliers prior to shipment to our facilities in the U.S. and Europe. We typically negotiate the price of products that we purchase from Ablecom on a quarterly basis; however, either party may re-negotiate the price of products with each order. As a result of our relationship with Ablecom, it is possible that Ablecom may in the future sell products to us at a price higher or lower than we could obtain from an unrelated third party supplier. This may result in our future reporting of gross profit as a percentage of net sales that is less than or in excess of what we might have obtained absent our relationship with Ablecom.

In order to continue to increase our net sales and profits, we believe that we must continue to develop flexible and customizable server solutions and be among the first to market with new features and products. We measure our financial success based on various indicators, including growth in net sales, gross profit as a percentage of net sales, operating income as a percentage of net sales, levels of inventory, and days sales outstanding, or DSOs. In connection with these efforts, we monitor daily and weekly sales and shipment reports. Among the key non-financial indicators of our success is our ability to rapidly introduce new products and deliver the latest application optimized server solutions. In this regard, we work closely with microprocessor and other component vendors to take advantage of new technologies as they are introduced. Historically, our ability to introduce new products rapidly has allowed us to benefit from the introduction of new microprocessors and as a result we monitor the introduction cycles of Intel, AMD and Nvidia carefully. This also impacts our research and development expenditures. For example, our results for the quarter ended March 31, 2009 were in part adversely impacted by customer order delays in anticipation of the introduction of the Nehalem line of microprocessors and research and development expenditures necessary for us to prepare for the introduction.

Other Financial Highlights

The following is a summary of other financial highlights of fiscal year 2011:

38

Table of Contents

Fiscal Year

Our fiscal year ends on June 30. References to fiscal year 2011, for example, refer to the fiscal year ended June 30, 2011.

Revenues and Expenses

Net sales. Net sales consist of sales of our server solutions, including server systems, subsystems and accessories. The main factors which impact our net sales are unit volumes shipped and average selling prices. The prices for server systems range widely depending upon the configuration, and the prices for our subsystems and accessories vary based on the type. As with most electronics-based products, average selling prices typically are highest at the time of introduction of new products which utilize the latest technology and tend to decrease over time as such products mature in the market and are replaced by next generation products.

Cost of sales. Cost of sales primarily consists of the costs to manufacture our products, including the costs of materials, contract manufacturing, shipping, personnel and related expenses, equipment and facility expenses, warranty costs and inventory excess and obsolete provisions. The primary factors that impact our cost of sales are the mix of products sold and cost of materials, which include raw material costs, shipping costs and salary and benefits related to production. Cost of sales as a percentage of net sales may increase over time if decreases in average selling prices are not offset by corresponding decreases in our costs. Our cost of sales, as a percentage of net sales, is generally lower on server systems than on subsystems and accessories. Because we do not have long-term fixed supply agreements, our cost of sales is subject to change based on market conditions.

Research and development expenses. Research and development expenses consist of the personnel and related expenses of our research and development teams, and materials and supplies, consulting services, third party testing services and equipment and facility expenses related to our research and development activities. All research and development costs are expensed as incurred. We occasionally receive non-recurring engineering, or NRE funding from certain suppliers and customers. Under these programs, we are reimbursed for certain research and development costs that we incur as part of the joint development of our products and those of our suppliers and customers. These amounts offset a portion of the related research and development expenses and have the effect of reducing our reported research and development expenses.

Sales and marketing expenses. Sales and marketing expenses consist primarily of salaries and commissions for our sales and marketing personnel, costs for tradeshows, independent sales representative fees and marketing programs. From time to time, we receive cooperative marketing funding from certain suppliers. Under these programs, we are reimbursed for certain marketing costs that we incur as part of the joint promotion of our products and those of our suppliers. These amounts offset a portion of the related expenses and have the effect of reducing our reported sales and marketing expenses. Similarly, we from time to time offer our distributors cooperative marketing funding which has the effect of increasing our expenses. The timing, magnitude and estimated usage of our programs and those of our suppliers can result in significant variations in reported sales and marketing expenses from period to period. Spending on cooperative marketing, either by us or our suppliers, typically increases in connection with significant product releases by us or our suppliers.

General and administrative expenses. General and administrative expenses consist primarily of general corporate costs, including personnel expenses, financial reporting, corporate governance and compliance and outside legal, audit and tax fees.

Provision for litigation loss. Loss from litigation relates to an action filed in France by Digitechnic, S.A., a former customer. The Company entered into a settlement agreement with Digitechnic, pursuant to which the Company made a payment of $1.1 million in December 2009.

Interest and other income, net. Interest and other income, net represents the net of our interest income on investments or interest expense on the building loans or letters of credit for our owned facilities offset by interest earned on our cash balances.

39

Table of Contents

Income tax provision. Our income tax provision is based on our taxable income generated in the jurisdictions in which we operate, currently primarily the United States and the Netherlands and to a lesser extent, Taiwan. Our effective tax rate differs from the statutory rate primarily due to research and development tax credits and the domestic production activities deduction which were partially offset by the impact of state taxes and stock option expenses. A reconciliation of the federal statutory income tax rate to our effective tax rate is set forth in Note 12 of Notes to Consolidated Financial Statements.

Critical Accounting Policies

Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amount of assets, liabilities, revenues and expenses. We evaluate our estimates on an on-going basis, including those related to allowances for doubtful accounts and sales returns, cooperative marketing accruals, investment valuations, inventory valuations, income taxes, warranty obligations and stock-based compensation. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making the judgments we make about the carrying values of assets and liabilities that are not readily apparent from other sources. Because these estimates can vary depending on the situation, actual results may differ from the estimates.

We believe the following are our most critical accounting policies as they require our more significant judgments in the preparation of our financial statements.

Revenue recognition. We recognize revenue from sales of products, when persuasive evidence of an arrangement exists, shipment has occurred and title has transferred, the sales price is fixed or determinable, collection of the resulting receivable is reasonably assured, and all significant obligations have been met. Generally this occurs at the time of shipment when risk of loss and title has passed to the customer. Our standard arrangement with our customers includes a signed purchase order or contract, 30 to 60 days payment terms, Ex-works terms, except for a few customers who have free-on-board destination terms or customer acceptance provisions, and revenue is recognized when the products arrive or are accepted at the destination. We generally do not provide for non-warranty rights of return except for products which have “Out-of-box” failure, where customers could return these products for credit within 30 days of receiving the items. Certain distributors and OEMs are also permitted to return products in unopened boxes, limited to purchases over a specified period of time, generally within 60 to 90 days of the purchase, or to products in the distributor’s or OEM’s inventory at certain times (such as the termination of the agreement or product obsolescence). In addition, we have a sale arrangement with an OEM that has limited product return rights. To estimate reserves for future sales returns, we regularly review our history of actual returns for each major product line. We also communicate regularly with our distributors to gather information about end customer satisfaction, and to determine the volume of inventory in the channel. Reserves for future returns are adjusted as necessary, based on returns experience, returns expectations and communication with our distributors.

In addition, certain customers have acceptance provisions and revenue is deferred until the customers provide the necessary acceptance. At June 30, 2011 and 2010, we had deferred revenue of $2.4 million and $1.3 million and related deferred product costs of $1.9 million and $1.3 million, respectively, related to shipments to customers pending acceptances.

Probability of collection is assessed on a customer-by-customer basis. Customers are subjected to a credit review process that evaluates the customers’ financial position and ability to pay. If it is determined from the outset of an arrangement that collection is not probable based upon the review process, the customers are required to pay cash in advance of shipment. We also make estimates of the uncollectibility of accounts receivables, analyzing accounts receivable and historical bad debts, customer concentrations, customer-credit-worthiness, current economic trends and changes in customer payment terms to evaluate the adequacy of the

40

Table of Contents

allowance for doubtful accounts. On a quarterly basis, we evaluate aged items in the accounts receivable aging report and provide an allowance in an amount we deem adequate for doubtful accounts. If management were to make different judgments or utilize different estimates, material differences in the amount of our reported operating expenses could result. We provide for price protection to certain distributors. We assess the market competition and product technology obsolescence, and make price adjustments based on our judgment. Upon each announcement of price reductions, the accrual for price protection is calculated based on our distributors’ inventory on hand. Such reserves are recorded as a reduction to revenue at the time we reduce the product prices.

We have an immaterial amount of service revenue relating to non-warranty repairs, which is recognized upon shipment of the repaired units to customers. Service revenue has been less than 10% of net sales for all periods presented and is not separately disclosed.

Cooperative marketing accruals. We have arrangements with resellers of our products to reimburse the resellers for cooperative marketing costs meeting specified criteria. We accrue the cooperative marketing costs based on these arrangements and our estimate for resellers’ claims for marketing activities. We record marketing costs meeting such specified criteria within sales and marketing expenses in the accompanying condensed consolidated statements of operations. For those marketing costs that do not meet the specified criteria, the amounts are recorded as a reduction to sales in the accompanying condensed consolidated statements of operations.

Impairment of short-term and long-term investments. Impairment of short-term and long-term investments relates to the unrealized loss on the carrying value of our investments in auction rate securities; such securities were rated AAA at the date of purchase. The liquidity and fair value of these securities has been negatively impacted by the uncertainty in the credit markets and exposure of these securities to the financial condition of bond insurance companies. We have received all interest payments due on these instruments on a timely basis. Each of these securities has been subject to auction processes for which there has been insufficient bidders on the scheduled rollover dates and the auctions have subsequently failed. When these securities lost the short-term liquidity previously provided by the auction processes, we reclassified these securities as long-term investments. For the securities with the stated maturity less than a year, the securities were classified as short-term available-for-sale investments. We have used a discounted cash flow model to estimate the fair value of these investments as of June 30, 2011 and 2010. The material factors used in preparing the discounted cash flow model are 1) the discount rate utilized to present value the cash flows, 2) the time period until redemption and 3) the estimated rate of return. Management derives the estimates by obtaining input from market data on the applicable discount rate, estimated time to maturity and estimated rate of return. The changes in fair value have been primarily due to changes in the estimated rate of return and a change in the estimated period to liquidity. The fair value of our investment portfolio may change between 2% to 3% by increasing or decreasing the rate of return used by 1% or by increasing or decreasing the term used by 1 year. Changes in these estimates or in the market conditions for these investments are likely in the future based upon the then current market conditions for these investments and may affect the fair value of these investments. As of June 30, 2011 and 2010 we have recorded an accumulated unrealized loss of $0.2 million, net of deferred income taxes, on the securities. We deem this loss to be temporary as we determined that we will not likely be required to sell the securities before their anticipated recovery and we have the intent and ability to hold our investments until recovery of cost.

Product warranties. We offer product warranties ranging from 15 to 39 months against any defective product. We accrue for estimated returns of defective products at the time revenue is recognized, based on historical warranty experience and recent trends. We monitor warranty obligations and may make revisions to our warranty reserve if actual costs of product repair and replacement are significantly higher or lower than estimated. Accruals for anticipated future warranty costs are charged to cost of sales and included in accrued liabilities. The liability for product warranties was $4.7 million as of June 30, 2011, compared with $4.6 million as of June 30, 2010. The provision for warranty reserve was $9.6 million, $8.5 million and $6.7 million in fiscal years 2011, 2010 and 2009, respectively. Our estimates and assumptions used have been historically close to actual. The change in estimated liability for pre-existing warranties was ($0.9) million, ($0.9) million and $0.3

41

Table of Contents

million in fiscal years 2011, 2010 and 2009, respectively. As we experienced an increase in net sales in fiscal year 2011, the provision for warranty reserve increased $1.1 million compared to fiscal year 2010. As we experienced an increase in net sales in fiscal year 2010, the provision for warranty reserve increased $1.8 million compared to fiscal year 2009. If in future periods, we experience or anticipate an increase or decrease in warranty claims as a result of new product introductions or change in unit volumes compared with our historical experience, or if the cost of servicing warranty claims is greater or lesser than expected, we intend to adjust our estimates appropriately.

Inventory valuation. Inventory is valued at the lower of cost or market. We evaluate inventory on a quarterly basis for lower of cost or market and excess and obsolescence and, as necessary, write down the valuation of units to lower of cost or market or for excess and obsolescence based upon the number of units that are unlikely to be sold based upon estimated demand for the following twelve months. This evaluation takes into account matters including expected demand, anticipated sales price, product obsolescence and other factors. If actual future demand for our products is less than currently forecasted, additional inventory adjustments may be required. Once a reserve is established, it is maintained until the product to which it relates is sold or scrapped. If a unit that has been written down is subsequently sold, the cost associated with the revenue from this unit is reduced to the extent of the write down, resulting in an increase in gross profit. We monitor the extent to which previously written down inventory is sold at amounts greater or less than carrying value, and based on this analysis, adjust our estimate for determining future write downs. If in future periods, we experience or anticipate a change in recovery rate compared with our historical experience, our gross margin would be affected. Our provision for inventory was $3.4 million, $2.6 million and $1.5 million in fiscal years 2011, 2010 and 2009, respectively.

Accounting for income taxes. We account for income taxes under an asset and liability approach. Deferred income taxes reflect the impact of temporary differences between assets and liabilities recognized for financial reporting purposes and such amounts recognized for income tax reporting purposes, net operating loss carry-forwards and other tax credits measured by applying currently enacted tax laws. Valuation allowances are provided when necessary to reduce deferred tax assets to an amount that is more likely than not to be realized.

We recognize the tax liability for uncertain income tax positions on the income tax return based on the two-step process. The first step is to determine whether it is more likely than not that each income tax position would be sustained upon audit. The second step is to estimate and measure the tax benefit as the amount that has a greater than 50% likelihood of being realized upon ultimate settlement with the tax authority. Estimating these amounts requires us to determine the probability of various possible outcomes. We evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on the consideration of several factors, including changes in facts or circumstances, changes in applicable tax law, settlement of issues under audit and new exposures. If we later determine that our exposure is lower or that the liability is not sufficient to cover our revised expectations, we adjust the liability and effect a related change in our tax provision during the period in which we make such determination. See Note 12 of Notes to Consolidated Financial Statements for the impact on our consolidated financial statements.

Stock-based compensation. Effective July 1, 2006, stock-based compensation cost is measured at the grant date based on the fair value of the award and is recognized as expense on a straight-line basis over the requisite service period, which is generally the vesting period. Prior to July 1, 2006, we have recorded compensation expense for stock options with exercise prices less than the fair value of the underlying common stock at the option grant date. Amortization of deferred stock compensation, resulting from such stock options granted to employees and directors, when the exercise price of our stock options was less than the deemed market price of the underlying stock on the date of the grant, for the years ended June 30, 2011, 2010 and 2009, was $0, $0.1 million and $0.6 million, respectively. Since July 1, 2006, the Company measures the cost of employee services received in exchange for an award of equity instruments, including stock options, based on the grant-date fair value of the award. That cost will be recognized over the period during which an employee is required to provide services in exchange for the award, known as the requisite service period (usually the vesting period).

42

Table of Contents

Compensation expense for options granted to employees after July 1, 2006, was $8.1 million, $6.3 million and $5.1 million for the years ended June 30, 2011, 2010 and 2009, respectively.

As of June 30, 2011, the total unrecognized compensation cost, adjusted for estimated forfeitures, related to unvested stock options granted since July 1, 2006 to employees and non-employee directors, was $18.2 million, which is expected to be recognized as an expense over a weighted-average period of approximately 2.42 years. See Note 11 of Notes to our Consolidated Financial Statements for additional information.

We estimated the fair value of stock options granted using a Black-Scholes option-pricing model and a single option award approach. This model requires us to make estimates and assumptions with respect to the expected term of the option, the expected volatility of the price of our common stock and the expected forfeiture rate. The fair value is then amortized on a straight-line basis over the requisite service periods of the awards, which is generally the vesting period.

The expected term represents the period that our stock-based awards are expected to be outstanding and was determined based on an analysis of the relevant peer companies’ post-vest termination rates and exercise behavior. The expected volatility is based on a combination of the implied and historical volatility of our relevant peer group for the stock options granted prior to September 30, 2009. For stock options granted after September 30, 2009, expected volatility is based solely on our historical volatility. In addition, forfeitures of share-based awards are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. We use historical data to estimate pre-vesting option forfeitures and record stock-based compensation expense only for those awards that are expected to vest.

Variable interest entities. In June 2009, the FASB issued authoritative guidance on the consolidation of variable interest entities, which is effective for fiscal years beginning after November 15, 2009 and interim periods therein and thereafter. The new guidance requires revised evaluations of whether entities represent variable interest entities, ongoing assessments of control over such entities, and additional disclosures for variable interests. We adopted this standard and have analyzed our relationship with Ablecom and its subsidiaries (collectively “Ablecom”). We have concluded that Ablecom is a variable interest entity in accordance with applicable accounting standards and guidance; however, we are not the primary beneficiary of Ablecom and therefore, we do not consolidate Ablecom. In performing our analysis, we considered our explicit arrangements with Ablecom including the supplier and distributor arrangements. Also, as a result of the substantial related party relationship between the two companies, we considered whether any implicit arrangements exist that would cause us to protect those related parties’ interests in Ablecom from suffering losses. We determined that no implicit arrangements exist with Ablecom or its shareholders. Such an arrangement would be inconsistent with the fiduciary duty that we have towards our stockholders who do not own shares in Ablecom.

43

Table of Contents

Results of Operations

The following table sets forth our financial results, as a percentage of net sales for the periods indicated:

Comparison of Fiscal Years Ended June 30, 2011 and 2010

Net sales. Net sales increased by $221.1 million, or 30.7%, to $942.6 million from $721.4 million, for fiscal year 2011 and 2010, respectively. This increase was due primarily to an increase in unit volumes of server systems and subsystems and accessories and an increase in average selling prices of server systems. For fiscal year 2011, the number of units sold increased 40.5% to 4.8 million compared to 3.4 million for fiscal year 2010.

For fiscal year 2011, the number of server system units sold increased 25.6% to 221,000 compared to 176,000 for fiscal year 2010. The average selling price of server system units increased 14.3% to $1,600 in fiscal year 2011 compared to $1,400 in fiscal year 2010. The average selling prices of our server systems increased principally due to an increase in our sales of complete integrated, high-end server solutions to OEM and end customers and higher average selling prices of 1000, 6000 and 7000 Series configuration of servers which incorporated additional features such as higher density, memory and hard disk drive capacity and higher average selling prices of SuperBlades^® offset in part by declines in average selling prices of more mature products. Sales of server systems increased by $106.1 million or 43.3% from fiscal year 2010 to fiscal year 2011, primarily due to higher sales of OEM and end customers, higher sales of SuperBaldes^®, higher sales of 1000, 2000, 6000 and 7000 Series configuration of servers including storage and GPU solutions offset in part by lower sales of more mature products. Sales of server systems represented 37.3% of our net sales for fiscal year 2011 compared to 34.0% of our net sales for fiscal year 2010.

For fiscal year 2011, the number of subsystems and accessories units sold increased 41.3% to 4.6 million compared to 3.3 million for fiscal year 2010. Sales of subsystems and accessories increased by $115.1 million or 24.2% from fiscal year 2010 to fiscal year 2011, primarily due to higher sales of bundled server solutions to OEM and system integrators who increasingly are purchasing additional accessories from us and completing the final assembly themselves. Sales of subsystems and accessories represented 62.7% of our net sales for fiscal year 2011 as compared to 66.0% of our net sales for fiscal year 2010. For fiscal year 2011 and 2010, we derived 56.1% and 66.7%, respectively, of our net sales from products sold to distributors and we derived 43.9% and 33.3%, respectively, from sales to OEMs and to end customers. For fiscal year 2011, customers in the United

44

Table of Contents

States, Europe and Asia accounted for 58.3%, 21.4% and 16.9%, of our net sales, respectively, as compared to 60.1%, 21.7% and 14.8%, respectively, for fiscal year 2010.

Cost of sales. Cost of sales increased by $185.0 million, or 30.5%, to $791.5 million from $606.4 million, for fiscal year 2011 and 2010, respectively. Cost of sales as a percentage of net sales was 84.0% and 84.1% for fiscal year 2011 and 2010, respectively. The increase in absolute dollars of cost of sales was primarily attributable to the increase in net sales, an increase of $7.3 million in freight-in charges, an increase of $1.1 million in provision for warranty reserve and an increase of $0.7 million in provision for inventory reserve. The lower cost of sales as a percentage of net sales was primarily due to an increase in sales of server systems and an increase in sales to OEM and end customers. In fiscal year 2011, we recorded a $9.6 million expense, or 1.0% of net sales, related to the provision for warranty reserve as compared to $8.5 million, or 1.2% of net sales, in fiscal year 2010. The increase in the provision for warranty reserve was primarily due to higher net sales in fiscal year 2011. If in future periods we experience or anticipate an increase or decrease in warranty claims as a result of new product introductions or change in unit volumes compared with our historical experience, or if the cost of servicing warranty claims is greater or lesser than expected, our gross margin would be affected. In fiscal year 2011, we recorded a $3.4 million expense, or 0.4% of net sales, related to the inventory provision as compared to $2.6 million, or 0.4% of net sales, in fiscal year 2010. The increase in the inventory provision was primarily for older products as a result of product transitions.

Research and development expenses. Research and development expenses increased by $10.7 million, or 28.7%, to $48.1 million from $37.4 million, for fiscal year 2011 and 2010, respectively. Research and development expenses were 5.1% and 5.2% of net sales for fiscal year 2011 and 2010, respectively. The increase in absolute dollars was primarily due to an increase of $8.5 million in compensation and benefits resulting from growth in research and development personnel, including higher stock-based compensation expense related to expanded product development initiatives in the U.S. and in Taiwan, an increase of $3.0 million in development costs associated with new products offset in part by an increase of $0.8 million in non-recurring engineering funding from certain suppliers and customers.

Research and development expenses include stock-based compensation expense of $4.1 million and $3.1 million for fiscal year 2011 and 2010, respectively.

Sales and marketing expenses. Sales and marketing expenses increased by $6.4 million, or 31.3%, to $26.9 million from $20.5 million, for fiscal year 2011 and 2010, respectively. Sales and marketing expenses were 2.8% of net sales for both fiscal year 2011 and 2010. The increase in absolute dollars was primarily due to an increase of $4.3 million in compensation and benefits resulting from growth in sales and marketing personnel, including higher stock-based compensation expense, an increase of $1.1 million in advertising and promotion expense, an increase of $0.6 million in cooperative marketing funding to customers and an increase of $0.4 million in trade show and travel expenses.

Sales and marketing expenses include stock-based compensation expense of $1.1 million and $0.9 million for fiscal year 2011 and 2010, respectively.

General and administrative expenses. General and administrative expenses increased by $2.1 million, or 13.9%, to $17.4 million from $15.3 million, for fiscal year 2011 and 2010, respectively. General and administrative expenses were 1.9% and 2.1% of net sales for fiscal year 2011 and 2010, respectively. The increase in absolute dollars was primarily due to an increase of $2.4 million in compensation and benefits, including higher stock-based compensation expense, in part to support the expansion of our operations at our headquarters and operations in Taiwan, an increase of $0.6 million in customs fee accrual related to prior periods, an increase of $0.4 million in legal fees offset in part by an increase of $1.0 million in rental income and an increase of $0.6 million in foreign currency transaction gain.

General and administrative expenses include stock-based compensation expense of $2.1 million and $1.9 million for fiscal year 2011 and 2010, respectively.

45

Table of Contents

Provision for litigation loss. There was no loss from litigation expense for fiscal year 2011. For fiscal year 2010, there was a $1.1 million expense due to a settlement payment related to the Digitechnic lawsuit. (See Note 13 of Notes to Consolidated Financial Statements.)

Interest and other expense, net. Interest and other expense changed by $0.3 million, to $0.6 million of expense from $0.3 million of expense, for fiscal year 2011 and 2010, respectively, which included $0.7 million and $0.4 million of interest expense for fiscal year 2011 and 2010, respectively. The net change was primarily due to higher interest expense as our average debt outstanding for fiscal year 2011 was $21.5 million versus $2.5 million in fiscal year 2010. Interest rates were not significantly different in fiscal year 2011 compared to 2010. We expect that our interest expenses will increase in the future as we plan to obtain additional financing from banks to fund the construction of the Taiwan facilities and the expansion of our headquarters office in San Jose.

Provision for income taxes. Provision for income taxes increased by $4.3 million, or 31.8%, to $17.9 million from $13.6 million, for the fiscal year 2011 and 2010, respectively. The effective tax rate was 30.8% and 33.5% for fiscal year 2011 and 2010, respectively. The effective tax rate was lower for fiscal year 2011 primarily due to the reinstatement of Federal research and development tax credits and domestic production activities deduction which were partially offset by the impact of state taxes and stock option expenses.

Comparison of Fiscal Years Ended June 30, 2010 and 2009

Net sales. Net sales increased by $215.8 million, or 42.7%, to $721.4 million from $505.6 million, for fiscal year 2010 and 2009, respectively. This increase was due primarily to an increase in unit volumes of subsystems and accessories and average selling prices of server systems. For fiscal year 2010, the number of units sold increased 54.4% to 3.4 million compared to 2.2 million for fiscal year 2009.

For fiscal year 2010, the number of server system units sold increased 12.1% to 176,000 compared to 157,000 for fiscal year 2009. The average selling price of server system units increased 12.0% to $1,400 in fiscal year 2010 compared to $1,250 in fiscal year 2009. The average selling prices of our server systems increased principally due to higher average selling prices of our 6000 Series configuration of servers which incorporated additional features offset in part by declines in average selling prices of more mature products. Sales of server systems increased by $48.6 million or 24.7% from fiscal year 2009 to fiscal year 2010, primarily due to higher sales of our 6000 Series configuration of servers and higher sales to system integrators offset in part by lower sales of more mature products. Sales of server systems represented 34.0% of our net sales for fiscal year 2010 compared to 38.9% of our net sales for fiscal year 2009. For fiscal year 2010, the number of subsystems and accessories units sold increased 57.6% to 3.3 million compared to 2.1 million for fiscal year 2009. Sales of subsystems and accessories increased by $167.3 million or 54.1% from fiscal year 2009 to fiscal year 2010, primarily due to higher sales to distributors, resellers and system integrators who increasingly are purchasing additional accessories from us and completing the final assembly themselves. Sales of subsystems and accessories represented 66.0% of our net sales for fiscal year 2010 as compared to 61.1% of our net sales for fiscal year 2009. For fiscal year 2010 and 2009, we derived 66.7% and 64.9%, respectively, of our net sales from products sold to distributors and we derived 33.3% and 35.1%, respectively, from sales to OEMs and to end customers. For fiscal year 2010, customers in the United States, Europe and Asia accounted for 60.1%, 21.7% and 14.8%, of our net sales, respectively, as compared to 64.4%, 21.5% and 11.2%, respectively, for fiscal year 2009.

Cost of sales. Cost of sales increased by $189.5 million, or 45.5%, to $606.4 million from $416.9 million, for fiscal year 2010 and 2009, respectively. Cost of sales as a percentage of net sales was 84.1% and 82.5% for fiscal year 2010 and 2009, respectively. The increase in absolute dollars of cost of sales was primarily attributable to the increase in net sales, an increase of $3.3 million in freight-in charges, an increase of $1.8 million in provision for warranty reserve and an increase of $1.2 million in provision for inventory reserve. The higher cost of sales as a percentage of net sales was primarily due to a lower percentage of sales from server systems and a higher percentage of sales of subsystem and accessories and increased sales to distributors,

46

Table of Contents

resellers and system integrators. In fiscal year 2010, we recorded a $8.5 million expense, or 1.2% of net sales, related to the provision for warranty reserve as compared to $6.7 million, or 1.3% of net sales, in fiscal year 2009. The increase in the provision for warranty reserve was primarily due to higher net sales in fiscal year 2010. If in future periods we experience or anticipate an increase or decrease in warranty claims as a result of new product introductions or change in unit volumes compared with our historical experience, or if the cost of servicing warranty claims is greater or lesser than expected, our gross margin would be affected. In fiscal year 2010, we recorded a $2.6 million expense, or 0.4% of net sales, related to the inventory provision as compared to $1.5 million, or 0.3% of net sales, in fiscal year 2009. The increase in the inventory provision was primarily for older products as a result of product transitions.

Research and development expenses. Research and development expenses increased by $2.9 million, or 8.3%, to $37.4 million from $34.5 million, for fiscal year 2010 and 2009, respectively. Research and development expenses were 5.2% and 6.8% of net sales for fiscal year 2010 and 2009, respectively. The increase in absolute dollars was primarily due to an increase of $4.0 million in compensation and benefits resulting from growth in research and development personnel, including higher stock-based compensation expense to support the expansion of our operations at our headquarters and operations in the Netherlands and Taiwan and a decrease of $0.2 million in non-recurring engineering funding from certain suppliers and customers. This increase was offset in part by a decrease of $1.3 million in development costs associated with new products.

Research and development expenses include stock-based compensation expense of $3.1 million and $2.6 million for fiscal year 2010 and 2009, respectively.

Sales and marketing expenses. Sales and marketing expenses increased by $3.3 million, or 19.5%, to $20.5 million from $17.1 million, for fiscal year 2010 and 2009, respectively. Sales and marketing expenses were 2.8% and 3.4% of net sales for fiscal year 2010 and 2009, respectively. The increase in absolute dollars was primarily due to an increase of $2.0 million in compensation and benefits resulting from growth in sales and marketing personnel, including higher stock-based compensation expense, a decrease of $0.4 million in cooperative marketing funding from vendors, an increase of $0.4 million in advertising and promotion expenses and an increase of $0.3 million in trade show expenses.

Sales and marketing expenses include stock-based compensation expense of $0.9 million and $0.8 million for fiscal year 2010 and 2009, respectively.

General and administrative expenses. General and administrative expenses increased by $1.5 million, or 10.8%, to $15.3 million from $13.8 million, for fiscal year 2010 and 2009, respectively. General and administrative expenses were 2.1% and 2.7% of net sales for fiscal year 2010 and 2009, respectively. The increase in absolute dollars was primarily due to an increase of $0.9 million in compensation and benefits, including higher stock-based compensation expense, in part to support the expansion of our operations at our headquarters and operations in the Netherlands and Taiwan and an increase of $0.5 million in bad debt expenses.

General and administrative expenses include stock-based compensation expense of $1.9 million and $1.6 million for fiscal year 2010 and 2009, respectively.

Provision for litigation loss. Loss from litigation was $1.1 million for fiscal year 2010. There was no provision for fiscal year 2009. The provision was due to a settlement payment related to the Digitechnic lawsuit. (See Note 13 of Notes to Consolidated Financial Statements.)

Interest and other expense, net. Interest and other expense was reduced by $0.2 million, to $0.3 million of expense from $0.5 million of expense, for fiscal year 2010 and 2009, respectively, of which $0.4 million and $0.9 million was interest expense for fiscal year 2010 and 2009, respectively. The net change was due to lower interest income of $0.4 million resulting from lower interest rates and lower interest expense of $0.5 million as the Company paid off two outstanding building loans in July and August 2009. We expect the interest expenses

47

Table of Contents

will increase in the future as we have borrowed $18.6 million to purchase properties in San Jose, California in June 2010 and intend to obtain additional financing to purchase land and to fund building construction in Taiwan in fiscal year 2011.

Provision for income taxes. Provision for income taxes increased by $6.9 million, or 102.5%, to $13.6 million from $6.7 million, for the fiscal year 2010 and 2009, respectively. The effective tax rate was 33.5% and 29.4% for fiscal year 2010 and 2009, respectively. The increase in the effective tax rate was primarily due to the expiration of the federal research and development tax credit in fiscal year 2010.

Liquidity and Capital Resources

Since our inception, we have financed our growth primarily with funds generated from operations and from the proceeds of our initial public offering. Our cash and cash equivalents and short-term investments were $70.0 million and $73.5 million as of June 30, 2011 and 2010, respectively.

Operating Activities. Net cash provided by (used in) operating activities was $8.5 million, ($2.2) million and $21.8 million for fiscal years 2011, 2010 and 2009, respectively. Net cash provided by our operating activities for fiscal year 2011 was primarily due to our net income of $40.2 million, an increase in accounts payable of $16.9 million, stock-based compensation expense of $8.1 million, allowance for sales returns of $6.6 million, an increase in net income taxes payable of $5.7 million, depreciation expense of $5.5 million, an increase in accrued liabilities of $5.3 million, which was partially offset by an increase in inventory of $60.5 million and an increase in accounts receivable of $19.2 million. Net cash used in our operating activities for fiscal year 2010 was primarily due to our net income of $26.9 million, an increase in accounts payable of $21.8 million, an increase in net income taxes payable of $9.5 million, stock-based compensation expense of $6.5 million, an increase in accrued liabilities of $5.5 million and allowance for sales returns of $5.3 million which were offset by an increase in inventory of $48.2 million and an increase in accounts receivable of $33.3 million. Net cash provided by our operating activities for fiscal year 2009 was primarily due to our net income of $16.1 million, stock-based compensation expense of $5.7 million, an increase in net income taxes payable of $4.8 million and allowance for sales returns of $4.2 million which was substantially offset by a decrease in accounts payable of $6.9 million and an increase in inventory of $5.8 million.

The increase for fiscal year 2011 in accounts receivable was primarily due to higher net sales during fiscal year 2011. The increase for fiscal year 2011 in inventory, accounts payable and accrued liabilities was in part due to an increase in demand for our products resulting from a recovering economy, in part to support our growth and in part due to our increasing manufacturing activities in the Netherlands and Taiwan. We anticipate that accounts receivable, sales returns, inventory and accounts payable will continue to increase to the extent we continue to grow our product lines and our business.

The increase for fiscal year 2010 in accounts receivable was primarily due to higher net sales during fiscal year 2010. The increase for fiscal year 2010 in inventory, accounts payable and accrued liabilities was due to an increase in demand for our products resulting from a recovering economy and to support the growth of the Company.

The decrease for fiscal year 2009 in sales returns was primarily due to lower net sales during fiscal year 2009 as a result of reductions in information technology spending in response to the global economic downturn and to a lesser extent was impacted by delayed customer orders in anticipation of the release by Intel of its Nehalem line of microprocessors in the quarter ended March 31, 2009. The decrease for fiscal year 2009 in accounts payable was primarily due to timing of payments to our vendors. The increase for fiscal year 2009 in inventory was primarily due to our increased purchases of X8 Nehalem products which were launched at the end of March 31, 2009.

Investing activities. Net cash used in our investing activities was $24.8 million, $11.8 million and $2.7 million for fiscal years 2011, 2010 and 2009, respectively. In fiscal year 2011, $16.2 million was related to the

48

Table of Contents

purchase of property, plant and equipment including $6.1 million related to the land purchased in Taiwan in August 2010 and $9.2 million was related to a deposit made in March 2011 for land in Taiwan. This was offset by the redemption at par of investments in auction rate securities of $1.5 million. In fiscal year 2010, $22.2 million was related to the purchase of property, plant and equipment offset in part by the redemption at par of investments in auction rate securities of $8.9 million. In fiscal year 2009, $3.6 million was related to the purchase of property, plant and equipment offset in part by the redemption at par of investments in auction rate securities of $0.9 million.

We anticipate to close the title on the land deposit in Taiwan and finalize the purchase price, consisting of approximately 2.2 acres, in the first half of fiscal year 2012 to develop our manufacturing and service operations in Asia. We also plan to expand our headquarters office in San Jose, California. The construction of the Taiwan facilities and the headquarters office expansion in San Jose, California began in the fourth quarter of fiscal year 2011 and will continue through fiscal year 2012. The anticipated costs for the next twelve months to build the Taiwan facilities and the headquarters office expansion in San Jose, California are approximately $16.9 million. We plan to finance these projects through our operating cash flows and additional financing from banks in fiscal year 2012.

Financing activities. Net cash provided by (used in) our financing activities was $13.6 million, $16.3 million and ($0.3) million for fiscal years 2011, 2010 and 2009, respectively. In fiscal year 2011, we received $10.3 million related to the proceeds from the exercise of stock options. We withheld shares and paid the minimum tax withholding on behalf of several executive officers and an employee for their stock options and restricted stock awards of $8.4 million for fiscal year 2011. Further, we obtained a new term loan of $13.9 million and borrowed $9.9 million of our revolving line of credit. We repaid $14.1 million in loans for fiscal year 2011. We expect the net cash provided by financing activities will increase in the quarter ending September 30, 2011 as we intend to obtain additional financing from banks to construct our manufacturing building in Taiwan and support our building expansion in San Jose, California. In fiscal year 2010, $18.6 million was related to proceeds from the revolving line of credit associated with the purchase of three buildings and $6.4 million was proceeds from exercise of stock options and $1.5 million was related to the excess tax benefits from stock-based compensation. In fiscal year 2009, we repurchased 445,028 shares of treasury stock for $2.0 million and received $2.1 million of proceeds from the exercise of stock options.

We expect to experience continued growth in our working capital requirements and capital expenditures as we continue to expand our business. We intend to fund this continued expansion through cash generated by operations and by drawing on the revolving credit facility or through other debt financing. However we cannot be certain whether such financing will be available on commercially reasonable or otherwise favorable terms or that such financing will be available at all. We anticipate that working capital and capital expenditures will constitute a material use of our cash resources. We have sufficient cash on hand to continue to operate in the next 12 months.

Other factors affecting liquidity and capital resources

As of June 30, 2011, we had a revolving line of credit totaling $25.0 million that matures on June 15, 2013 with an interest rate at the LIBOR rate plus 1.50% per annum. In June 2010, we used $18.6 million of the line of credit to purchase three buildings with approximately 167,000 square feet of space in San Jose, California adjacent to our headquarters. The loan is secured by all our assets except for the three buildings purchased in San Jose, California, and we were required to obtain a mortgage loan to pay-off this line of credit by December 2010. In December 2010, we repaid $13.9 million of the line of credit by obtaining a term loan for the same amount and the remaining $4.7 million of the line of credit has been extended to be repaid by June 15, 2013. The term loan is secured by the three buildings purchased in San Jose, California in June 2010 and the principal and interest are payable monthly through October 1, 2013 with an interest rate at the LIBOR rate plus 1.75% per annum. The LIBOR rate was 0.19% at June 30, 2011.

49

Table of Contents

In March 2011, we drew an additional $9.9 million of the line of credit with an interest rate equal to the lender’s established interest rate which is adjusted monthly and paid $9.2 million for a deposit to purchase land in Taiwan. The interest rate was 1.64% at June 30, 2011. As of June 30, 2011 and June 30, 2010, the total outstanding borrowing under these loans was $28.2 million and $18.6 million, respectively. As of June 30, 2011, the unused revolving line of credit was $10.4 million and we were not in compliance with the investment covenant associated with these loans; however, we obtained waivers as of June 30, 2011 from the lenders in August 2011 regarding such non-compliance.

In addition, we have historically paid our contract manufacturers within 38 to 76 days of invoice and Ablecom between 53 and 100 days of invoice. As of June 30, 2011 and 2010 amounts owed to Ablecom by us were $34.2 million and $19.5 million, respectively.

In February 2008, we leased an office building of approximately 246,000 square feet in Fremont, California with total payment obligations of $6.8 million over the next 4.1 years as of June 30, 2011. We also obtained an irrevocable standby letter of credit required by the landlord of the office lease totaling $121,000. This amount has been classified as a restricted cash as of June 30, 2011.

As of June 30, 2011, we held $5.2 million of auction rate securities, net of unrealized losses, representing our interest in auction rate preferred shares in a closed end mutual fund invested in municipal securities and auction rate student loans guaranteed by the Federal Family Education Loan Program; such auction rate securities were rated AAA or BAA at June 30, 2011. These auction rate preferred shares have no stated maturity date and stated maturity dates for these auction rate student loans range from 2035 to 2040.

During February 2008, the auctions for these auction rate securities began to fail to obtain sufficient bids to establish a clearing rate and were not saleable in the auction, thereby losing the short-term liquidity previously provided by the auction process. As a result, as of June 30, 2011, $5.2 million of these auction rate securities have been classified as long-term available-for-sale investments. Based on our assessment of fair value at June 30, 2011, we have recorded an accumulated unrealized loss of $0.2 million, net of deferred income taxes, on long-term auction rate securities. The unrealized loss was deemed to be temporary and has been recorded as a component of accumulated other comprehensive loss.

Although we have determined that we will not likely be required to sell the securities before the anticipated recovery and we have the intent and ability to hold these investments until successful auctions occur, these investments are not currently liquid and in the event we need to access these funds, we will not be able to do so without a loss of principal. There can be no assurances that these investments will be settled in the short term or that they will not become other-than-temporarily impaired subsequent to June 30, 2011, as the market for these investments is presently uncertain. In any event, we do not have a present need to access these funds for operational purposes. We will continue to monitor and evaluate these investments as there is no assurance as to when the market for these investments will allow us to liquidate them. We may be required to record impairment charges in periods subsequent to June 30, 2011 with respect to these securities and, if a liquid market does not develop for these investments, we could be required to hold them to maturity. In fiscal year 2011, 2010 and 2009, $1.5 million, $8.9 million and $0.9 million of these auction rate securities were redeemed at par, respectively.

Our long-term future capital requirements will depend on many factors, including our level of revenues, the timing and extent of spending to support our product development efforts, the expansion of sales and marketing activities, the timing of our introductions of new products, the costs to ensure access to adequate manufacturing capacity and the continuing market acceptance of our products. We could be required, or could elect, to seek additional funding through public or private equity or debt financing and additional funds may not be available on terms acceptable to us or at all.

50

Table of Contents

Contractual Obligations

The following table describes our contractual obligations as of June 30, 2011:

The table above excludes liabilities for deferred revenue for warranty services of $2.4 million and unrecognized tax benefits and related interest and penalties accrual of $7.2 million. We have not provided a detailed estimate of the payment timing of unrecognized tax benefits due to the uncertainty of when the related tax settlements will become due. See Note 12 of Notes to our Consolidated Financial Statements in Item 8 of this Form 10-K for a discussion of income taxes.

We expect to fund our remaining contractual obligations from our ongoing operations and existing cash and cash equivalents on hand.

Recent Accounting Pronouncements

In May 2011, the FASB issued additional guidance on fair value measurements that clarifies the application of existing guidance and disclosure requirements, changes certain fair value measurement principles and requires additional disclosures about fair value measurements. The updated guidance is effective on a prospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011. The adoption of this guidance will not have a material impact on our consolidated financial position and results of operations.

In June 2011, the FASB issued guidance regarding the presentation of comprehensive income. The new standard requires the presentation of comprehensive income, the components of net income and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. The new standard also requires presentation of adjustments for items that are reclassified from other comprehensive income to net income in the statement where the components of net income and the components of other comprehensive income are presented. The updated guidance is effective on a retrospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011. The adoption of this guidance will not have a material impact on our consolidated financial position and results of operations.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements.

51

Table of Contents

Interest Rate Risk

The primary objectives of our investment activities are to preserve principal, provide liquidity and maximize income without significantly increasing the risk. Some of the securities we invest in are subject to market risk. This means that a change in prevailing interest rates may cause the fair value of the investment to fluctuate. To minimize this risk, we maintain our portfolio of cash equivalents and short-term investments in money market funds and certificates of deposit. Since our results of operations are not dependent on investments, the risk associated with fluctuating interest rates is limited to our investment portfolio, and we believe that a 10% change in interest rates would not have a significant impact on our results of operations. As of June 30, 2011, our investments were in money market funds, certificates of deposits and auction rate securities (see Liquidity Risk below).

We had $28.2 million and $18.6 million of indebtedness under our credit facilities as of June 30, 2011 and 2010, respectively. In December 2010, we repaid $13.9 million of the revolving line of credit by obtaining a term loan. In March 2011, we also drew an additional $9.9 million from the revolving line of credit and paid $9.2 million for a deposit to purchase land in Taiwan that is adjacent to the land that was purchased in August 2010. The annual interest rate on our credit facilities for our outstanding term loan is based on the LIBOR rate plus 1.50% per annum. The annual interest rate for our revolving line of credit is based on LIBOR rate plus 1.75% per annum and lender’s established interest rate. The interest rate for the term loan and the revolving line of credit ranges from 1.69% to 2.14% at June 30, 2011 and 1.84% at June 30, 2010. We believe that a 10% change in interest rates would not have a significant impact on our results of operations.

Liquidity Risk

As of June 30, 2011, we held $5.2 million of auction rate securities, net of unrealized losses, representing our interest in auction rate preferred shares in a closed end mutual fund invested in municipal securities and auction rate student loans guaranteed by the Federal Family Education Loan Program; such auction rate securities were rated AAA or BAA at June 30, 2011. These auction rate preferred shares have no stated maturity date and the stated maturity dates for these auction rate student loans range from 2035 to 2040. During February 2008, the auctions for these auction rate securities began to fail to obtain sufficient bids to establish a clearing rate and were not saleable in the auction, thereby losing the short-term liquidity previously provided by the auction process. As a result, as of June 30, 2011, $5.2 million of these auction rate securities have been classified as long-term available-for-sale investments. Based on our assessment of fair value at June 30, 2011, we have recorded an accumulated unrealized loss of $0.2 million, net of deferred income taxes, on long-term auction rate securities. The unrealized loss was deemed to be temporary and has been recorded as a component of accumulated other comprehensive loss. During fiscal year 2011, 2010 and 2009, $1.5 million, $8.9 million and $0.9 million were redeemed at par, respectively.

Although we have determined that we will not likely be required to sell the securities before the anticipated recovery and we have the intent and ability to hold our investments until successful auctions occur, these investments are not currently liquid and in the event we need to access these funds, we will not be able to do so without a loss of principal. There can be no assurances that these investments will be settled in the short term or that they will not become other-than-temporarily impaired subsequent to June 30, 2011, as the market for these investments is presently uncertain. In any event, we do not have a present need to access these funds for operational purposes. We will continue to monitor and evaluate these investments as there is no assurance as to when the market for these investments will allow us to liquidate them. We may be required to record impairment charges in periods subsequent to June 30, 2011 with respect to these securities and, if a liquid market does not develop for these investments, we could be required to hold them to maturity.

52

Table of Contents

Foreign Currency Risk

To date, our international customer and supplier agreements have been denominated primarily in U.S. dollars, and accordingly, we have not been exposed to foreign currency exchange rate fluctuations from customer agreements, and do not currently engage in foreign currency hedging transactions. However, the functional currency of our operations in Netherlands and Taiwan is the U.S. dollar and our local accounts are maintained in the local currency in the Netherlands and Taiwan, respectively, and thus we are subject to foreign currency exchange rate fluctuations associated with re-measurement to U.S. dollars. Such fluctuations have not been significant historically. Foreign exchange gain for fiscal years 2011, 2010 and 2009 was $0.8 million, $0.2 million and $3,000, respectively.

53

Table of Contents

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

54

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Super Micro Computer, Inc.:

We have audited the accompanying consolidated balance sheets of Super Micro Computer, Inc. and subsidiaries (the “Company”) as of June 30, 2011 and 2010, and the related consolidated statements of operations, stockholders’ equity, and cash flows for each of the three years in the period ended June 30, 2011. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Super Micro Computer, Inc. and subsidiaries as of June 30, 2011 and 2010, and the results of their operations and their cash flows for each of the three years in the period ended June 30, 2011, in conformity with accounting principles generally accepted in the United States of America.

As discussed in Note 10 to the consolidated financial statements, the Company has significant purchases from and sales to a related party.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of June 30, 2011, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated September 2, 2011 expressed an unqualified opinion on the Company’s internal control over financial reporting.

/s/ Deloitte & Touche, LLP

San Jose, California

September 2, 2011

55

Table of Contents

SUPER MICRO COMPUTER, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except share amounts)