TAYLOR DEVICES INC - Annual Report: 2015 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

F O R M 10-K

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended May 31, 2015

or

[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from __________ to __________

Commission file number 0-3498

TAYLOR DEVICES, INC.

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

Common Stock ($.025 par value)

(Title of class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

[ ] Yes [X] No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

[ ] Yes [X] No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

[X] Yes [ ] No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

[X] Yes [ ] No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). [ ] Yes [X] No

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant's most recently completed second fiscal quarter on November 30, 2014 is $32,541,000.

The number of shares outstanding of each of the registrant's classes of common stock as of August 12, 2015: 3,367,816.

TAYLOR DEVICES, INC.

DOCUMENTS INCORPORATED BY REFERENCE

FORM 10-K INDEX

PART I

Item 1. Business.

The Company was incorporated in the State of New York on July 22, 1955 and is engaged in the design, development, manufacture and marketing of shock absorption, rate control, and energy storage devices for use in various types of machinery, equipment and structures. In addition to manufacturing and selling existing product lines, the Company continues to develop new and advanced technology products.

Principal Products

The Company manufactures and sells a single group of very similar products that have many different applications for customers. These similar products are included in one of six categories; namely, Seismic Dampers, Fluidicshoks®, Crane and Industrial Buffers, Self-Adjusting Shock Absorbers, Liquid Die Springs, and Vibration Dampers. Management does not track or otherwise account for sales broken down by these categories. The following is a summary of the capabilities and applications for these products.

Seismic Dampers are designed to ameliorate the effects of earthquake tremors on structures, and represent a substantial part of the business of the Company. Fluidicshoks® are small, extremely compact shock absorbers with up to 19,200 inch-pound capacities, produced in 15 standard sizes for primary use in the defense, aerospace and commercial industry. Crane and industrial buffers are larger versions of the Fluidicshoks® with up to 60,000,000 inch-pound capacities, produced in more than 60 standard sizes for industrial application on cranes, ships, container ships, railroad cars, truck docks, ladle and ingot cars, ore trolleys and car stops. Self-adjusting shock absorbers, which include versions of Fluidicshoks® and crane and industrial buffers, automatically adjust to different impact conditions, and are designed for high cycle application primarily in heavy industry. Liquid die springs are used as component parts of machinery and equipment used in the manufacture of tools and dies. Vibration dampers are used primarily by the aerospace and defense industries to control the response of electronics and optical systems subjected to air, ship, or spacecraft vibration.

Distribution

The Company uses the services of more than 50 sales representatives and distributors in the United States and Canada along with more than 20 representatives and distributors throughout the rest of the world. Specialized technical sales in aerospace and custom marketing activities are serviced by three sales agents, under the direction and with the assistance of Douglas P. Taylor, the Company's President. Sales representatives typically have non-exclusive, yearly agreements with the Company, which, in most instances, provide for payment of commissions on sales at 10% of the product's net aggregate selling price. Distributors also have non-exclusive, yearly agreements with the Company to purchase the Company's products for resale purposes.

Competition

The Company faces competition on mature aerospace and defense programs which may use more conventional products manufactured under less stringent government specifications. Two foreign companies are the Company's competitors in the production of crane buffers.

The Company's principal competitor for the manufacture of products in the aerospace and commercial aerospace industries field is UTC Aerospace Systems Division of United Technologies in Ft. Worth, Texas. While the Company is competitive with this company in the areas of pricing, warranty and product performance, due to limited financing and manufacturing facilities, the Company cannot compete in the area of volume production.

The Company competes directly against two other firms supplying seismic damping devices, as well as numerous other firms which supply alternative seismic protection technologies.

Raw Materials and Supplies

The principal raw materials and supplies used by the Company in the manufacture of its products are provided by numerous U.S. and foreign suppliers. The loss of any one of these would not materially affect the Company's operations.

Dependence Upon Major Customers

The Company is not dependent on any one or a few major customers. Sales to five customers approximated 52% (14%, 12%, 11%, 9% and 6%, respectively) of net sales for 2015. The loss of any or all of these customers, unless the business is replaced by the Company, could result in an adverse effect on the results for the Company.

Patents, Trademarks and Licenses

The Company holds approximately 13 patents expiring at different times until the year 2032.

Terms of Sale

The Company does not carry significant inventory for rapid delivery to customers, and goods are not normally sold with return rights such as are available for consignment sales. The Company had no inventory out on consignment and no consignment sales for the years ended May 31, 2015 and 2014. No extended payment terms are offered. During the year ended May 31, 2015, delivery time after receipt of orders averaged 8 to 10 weeks for the Company's standard products. Due to the volatility of construction and aerospace/defense programs, progress payments are usually required for larger projects using custom designed components of the Company.

Need for Government Approval of Principal Products or Services

Contracts between the Company and the federal government or its independent contractors are subject to termination at the election of the federal government. Contracts are generally entered into on a fixed price basis. If the federal government should limit defense spending, these contracts could be reduced or terminated, which management believes would have a materially adverse effect on the Company.

Research and Development

The Company does not generally engage in major product research and development activities in connection with the design of its products, except when funded by aerospace customers or the federal government. The Company, however, engages in research testing of its products. For the fiscal years ended May 31, 2015 and 2014, the Company expended $268,000 and $317,000, respectively, on manufacturing research. For the years ended May 31, 2015 and 2014, defense sponsored research and development totaled $49,000 and $77,000, respectively.

Government Regulation

Compliance with federal, state and local laws and regulations which have been enacted or adopted regulating the discharge of materials into the environment has had no material effect on the Company, and the Company believes that it is in substantial compliance with such provisions.

The Company is subject to the Occupational Safety and Health Act ("OSHA") and the rules and regulations promulgated thereunder, which establish strict standards for the protection of employees, and impose fines for violations of such standards. The Company believes that it is in substantial compliance with OSHA provisions and does not anticipate any material corrective expenditures in the near future. The Company currently incurs only moderate costs with respect to disposal of hazardous waste and compliance with OSHA regulations.

The Company is also subject to regulations relating to production of products for the federal government. These regulations allow for frequent governmental audits of the Company's operations and fairly extensive testing of Company products. The Company believes that it is in substantial compliance with these regulations and does not anticipate corrective expenditures in the future.

Employees

Exclusive of Company sales representatives and distributors, as of May 31, 2015, the Company had 112 employees, including three executive officers, and seven part time employees. The Company has good relations with its employees.

Item 1A. Risk Factors.

Smaller reporting companies are not required to provide the information required by this item.

Item 1B. Unresolved Staff Comments.

Not applicable.

Item 2. Properties

The Company's production facilities occupy approximately six acres on Tonawanda Island in North Tonawanda, New York and are comprised of four interconnected buildings and two adjacent buildings. The production facilities consist of a small parts plant (approximately 4,400 square feet), a large parts plant (approximately 13,500 square feet), and include a facility of approximately 7,000 square feet comprised of a test facility, storage area, pump area and the Company's general offices. One adjacent building is a 17,000 square foot seismic assembly test facility. Another adjacent building (approximately 2,000 square feet) is used as a training facility. These facilities total more than 45,000 square feet. Adjacent to these facilities, the Company has a remote test facility used for shock testing. This state-of-the-art test facility is 1,200 square feet. The small parts plant consists of a complete small machine shop and tool room that produces all of the Company's product items which are less than two inches in diameter. The large parts plant consists of a complete large machine shop and tool room. Both plants contain custom-built machinery for boring, deep-hole drilling and turning of parts.

The Company owns three additional industrial buildings on nine acres of land in the City of North Tonawanda located 1.4 miles from the Company’s headquarters on Tonawanda Island. Total area of the three buildings is 46,000 square feet. The Company’s production machinery was relocated from the Company’s Tonawanda Island site in the autumn of 2013 and overhead cranes have been installed to move large parts from machine to machine. This allowed the former machining areas at the Tonawanda Island site to house greatly expanded assembly and product testing areas. All corporate and engineering offices were unaffected by the change and remain on Tonawanda Island.

The Company's real properties are subject to a negative pledge agreement with its lender, First Niagara Bank. The Company has agreed with the lender that, for so long as the credit facilities with the lender are outstanding, the Company will not sell, lease or mortgage any of its real properties. Additional information regarding the Company's agreement with First Niagara Bank is contained in Item 7, Management's Discussion and Analysis of Financial Condition and Results of Operations, at "Capital Resources, Line of Credit and Long-Term Debt."

The Company leases a separate warehouse for storage from an unrelated third party, consisting of approximately 3,600 square feet at $975 per month. The warehouse is located approximately one-quarter mile from the above-referenced production facilities and office space. The total rental expense incurred by the Company for this facility in fiscal 2015 was $11,700.

The Company believes it is carrying adequate insurance coverage on its facilities and their contents.

Item 3. Legal Proceedings.

There are no legal proceedings at present.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases Of Equity Securities.

Market Information

The Company's Common Stock trades on the NASDAQ Capital Market of the National Association of Securities Dealers Automated Quotation ("NASDAQ") stock market under the symbol TAYD. The high and low sales information noted below for the quarters of fiscal year 2015 and fiscal year 2014 were obtained from NASDAQ.

Holders

As of August 12, 2015, the number of issued and outstanding shares of Common Stock was 3,367,816 and the approximate number of record holders of the Company's Common Stock was 685. Due to a substantial number of shares of the Company's Common Stock held in street name, the Company believes that the total number of beneficial owners of its Common Stock exceeds 2,000.

Dividends

No cash or stock dividends have been declared during the last two fiscal years. The Company plans to retain cash in the foreseeable future to fund working capital needs.

As of September 15, 2008, the Company's Board of Directors adopted a shareholder rights plan designed to deter coercive or unfair takeover tactics and prevent an acquirer from gaining control of the Company without offering a fair price to shareholders. Under the plan, certain rights ("Rights") were distributed as a dividend on each share of Common Stock (one Right for each share of Common Stock) held as of the close of business on October 3, 2008. Each whole Right entitles the holder, under certain defined conditions, to buy one two-thousandths (1/2000) of a newly issued share of the Company's Series 2008 Junior Participating Preferred Stock ("Series 2008 Preferred Stock") at a purchase price of $5.00 per unit of one two-thousandths of a share. Rights attach to and trade with the shares of Common Stock, without being evidenced by a separate certificate. No separate Rights certificates will be issued unless and until the Rights detach from Common Stock and become exercisable for shares of the Series 2008 Preferred Stock.

The Rights become exercisable to purchase shares of Preferred Stock (or, in certain circumstances, Common Stock) only if (i) a person acquired 15% or more of the Company's Common Stock, or (ii) a person commenced a tender or exchange offer for 10% or more of the Company's Common Stock, or (iii) the Board of Directors determined that the beneficial owner of at least 10% of the Company's Common Stock intended to cause the Company to take certain actions adverse to it and its shareholders or that such ownership would have a material adverse effect on the Company. The Rights Plan will expire on October 5, 2018.

Issuer Purchases of Equity Securities

The Company did not repurchase any shares of its common stock during the year ended May 31, 2015. On November 7, 2014, the Board of Directors of the Registrant voted unanimously to continue the share repurchase agreement, authorized by the Board in 2010, with Merrill Lynch, Pierce, Fenner & Smith Incorporated ("MLPF&S") under which the Company repurchases shares of its common stock. The Company has designated $419,815 of cash on hand as available for open-market purchases. Since Board authorization in 2010, a total of 15,600 shares have been purchased at an average price per share of $5.14. Repurchases are made by MLPF&S for the benefit of the Registrant.

Equity Compensation Plan Information

The following table sets forth information regarding equity compensation plans of the Company as of May 31, 2015.

Item 6. Selected Financial Data

The Company qualifies as a smaller reporting company, as defined by 17 CFR §229.10(f)(1), and is not required to provide the information required by this Item.

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations.

Cautionary Statement

The Private Securities Litigation Reform Act of 1995 provides a "safe harbor" for forward-looking statements. Information in this Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations" and elsewhere in this 10-K that does not consist of historical facts are "forward-looking statements." Statements accompanied or qualified by, or containing, words such as "may," "will," "should," "believes," "expects," "intends," "plans," "projects," "estimates," "predicts," "potential," "outlook," "forecast," "anticipates," "presume," "assume" and "optimistic" constitute forward-looking statements and, as such, are not a guarantee of future performance. The statements involve factors, risks and uncertainties, the impact or occurrence of which can cause actual results to differ materially from the expected results described in such statements. Risks and uncertainties can include, among others, fluctuations in general business cycles and changing economic conditions; variations in timing and amount of customer orders; changing product demand and industry capacity; increased competition and pricing pressures; advances in technology that can reduce the demand for the Company's products, as well as other factors, many or all of which may be beyond the Company's control. Consequently, investors should not place undue reliance on forward-looking statements as predictive of future results. The Company disclaims any obligation to release publicly any updates or revisions to the forward-looking statements herein to reflect any change in the Company's expectations with regard thereto, or any changes in events, conditions or circumstances on which any such statement is based.

Application of Critical Accounting Policies and Estimates

The Company's consolidated financial statements and accompanying notes are prepared in accordance with U.S. generally accepted accounting principles. The preparation of the Company's financial statements requires management to make estimates, assumptions and judgments that affect the amounts reported. These estimates, assumptions and judgments are affected by management's application of accounting policies, which are discussed in Note 1. "Summary of Significant Accounting Policies" and elsewhere in the accompanying consolidated financial statements. As discussed below, our financial position or results of operations may be materially affected when reported under different conditions or when using different assumptions in the application of such policies. In the event estimates or assumptions prove to be different from actual amounts, adjustments are made in subsequent periods to reflect more current information. Management believes the following critical accounting policies affect the more significant judgments and estimates used in the preparation of the Company's financial statements.

Accounts Receivable

Our ability to collect outstanding receivables from our customers is critical to our operating performance and cash flows. Accounts receivable are stated at an amount management expects to collect from outstanding balances. Management provides for probable uncollectible accounts through a charge to earnings and a credit to a valuation allowance based on its assessment of the current status of individual accounts after considering the age of each receivable and communications with the customers involved. Balances that are collected, for which a credit to a valuation allowance had previously been recorded, result in a current-period reversal of the earlier transaction charging earnings and crediting a valuation allowance. Balances that are still outstanding after management has used reasonable collection efforts are written off through a charge to the valuation allowance and a credit to accounts receivable in the current period. The actual amount of accounts written off over the five year period ended May 31, 2015 equaled less than 0.1% of sales for that period. The balance of the valuation allowance has decreased since May 31, 2014 to the current level of slightly less than $10,000. Management does not expect the valuation allowance to materially change in the next twelve months for the current accounts receivable balance.

Inventory

Inventory is stated at the lower of average cost or market. Average cost approximates first-in, first-out cost.

Maintenance and other inventory represent stock that is estimated to have a product life-cycle in excess of twelve-months. This stock represents certain items the Company is required to maintain for service of products sold, and items that are generally subject to spontaneous ordering.

This inventory is particularly sensitive to technical obsolescence in the near term due to its use in industries characterized by the continuous introduction of new product lines, rapid technological advances and product obsolescence. Therefore, management of the Company has recorded an allowance for potential inventory obsolescence. Based on certain assumptions and judgments made from the information available at that time, we determine the amount in the inventory allowance. If these estimates and related assumptions or the market changes, we may be required to record additional reserves. Historically, actual results have not varied materially from the Company's estimates.

The provision for potential inventory obsolescence was $180,000 for each of the years ended May 31, 2015 and 2014.

Revenue Recognition

Sales are recognized when units are delivered or services are performed. Sales under fixed-price contracts are recorded as deliveries are made at the contract sales price of the units delivered. Sales under certain fixed-price contracts requiring substantial performance over several periods prior to commencement of deliveries, are accounted for under the percentage-of-completion method of accounting whereby revenues are recognized based on estimates of completion prepared on a ratio of cost to total estimated cost basis. Costs include all material and direct and indirect charges related to specific contracts. Other expenses are charged to operations, as incurred. Total estimated costs for each of the contracts are estimated based on a combination of historical costs of manufacturing similar products and estimates or quotes from vendors for supplying parts or services towards the completion of the manufacturing process. Adjustments to cost and profit estimates are made periodically due to changes in job performance, job conditions and estimated profitability, including those arising from final contract settlements. These changes may result in revisions to costs and income and are recognized in the period in which the revisions are determined. Any losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined. If total costs calculated upon completion of the manufacturing process in the current period for a contract are more than the estimated total costs at completion used to calculate revenue in a prior period, then the revenue and profits in the current period will be

lower than if the estimated costs used in the prior period calculation were equal to the actual total costs upon completion. Historically, actual results have not varied materially from the Company's estimates. In the fiscal year ended May 31, 2015, 70% of total revenue recognized was accounted for using the percentage-of-completion method of accounting while the remaining 30% of revenue was recorded as deliveries were made to our customers. In the fiscal year ended May 31, 2014, 47% of total revenue recognized was accounted for using the percentage-of-completion method of accounting while the remaining 53% of revenue was recorded as deliveries were made to our customers.

For financial statement presentation purposes, the Company nets progress billings against the total costs incurred on uncompleted contracts. The asset, "costs and estimated earnings in excess of billings," represents revenues recognized in excess of amounts billed. The liability, "billings in excess of costs and estimated earnings," represents billings in excess of revenues recognized.

Income Taxes

The provision for income taxes provides for the tax effects of transactions reported in the financial statements regardless of when such taxes are payable. Deferred tax assets and liabilities are recognized for the expected future tax consequences of temporary differences between the tax and financial statement basis of assets and liabilities. The deferred tax assets relate principally to asset valuation allowances such as inventory obsolescence reserves and bad debt reserves and also to liabilities including warranty reserves, accrued vacation, accrued commissions and others. The deferred tax liabilities relate primarily to differences between financial statement and tax depreciation. Deferred taxes are based on tax laws currently enacted with tax rates expected to be in effect when the taxes are actually paid or recovered.

Realization of the deferred tax assets is dependent on generating sufficient taxable income at the time temporary differences become deductible. The Company provides a valuation allowance to the extent that deferred tax assets may not be realized. A valuation allowance has not been recorded against the deferred tax assets since management believes it is more likely than not that the deferred tax assets are recoverable. The Company considers future taxable income and potential tax planning strategies in assessing the need for a potential valuation allowance. In future years the Company will need to generate approximately $2.5 million of taxable income in order to realize our deferred tax assets recorded as of May 31, 2015 of $858,000. This deferred tax asset balance is 22% ($240,000) less than at the end of the prior year. The amount of the deferred tax assets considered realizable however, could be reduced in the near term if estimates of future taxable income are reduced. If actual results differ from estimated results or if the Company adjusts these assumptions, the Company may need to adjust its deferred tax assets or liabilities, which could impact its effective tax rate. Historically, actual results have not varied materially from the Company's estimates.

The Company's practice is to recognize interest related to income tax matters in interest income / expense and to recognize penalties in selling, general and administrative expenses.

The Company and its subsidiary file consolidated Federal and State income tax returns. As of May 31, 2015, the Company had State investment tax credit carryforwards of approximately $261,000 expiring through May 2021.

Results of Operations

A summary of the period to period changes in the principal items included in the consolidated statements of income is shown below:

For the year ended May 31, 2015 (All figures being discussed are for the year ended May 31, 2015 as compared to the year ended May 31, 2014.)

The Company's consolidated results of operations showed a 53% increase in net revenues and an increase in net income of 92%. Gross profit increased by 60%. The growth in net revenue is mostly due to increased construction activity in the U.S. and Asia for new and retrofitted buildings and bridges requiring seismic protection. There was also strong growth in sales of isolation systems to defense customers for naval and aerospace applications. In the current period, revenues accounted for under the percentage-of-completion method of accounting increased by 126% from the level recorded in the prior year. This increase is primarily due to more projects in process in the current year (63 in fiscal 2015; 51 in fiscal 2014). Of the 63 projects in process during this year, 36 were still in process at 5/31/15 compared with the prior year when 25 of the 51 projects worked on were still in process at 5/31/14. The average value of these projects in-process at the end of the current fiscal year ($862,000) increased by 21% from the projects in-process at the end of the prior fiscal year ($710,000). The projects in the current year are 49% complete in the aggregate as compared with 31% for those in process at 5/31/14. Revenues recorded for all other product sales decreased by 12% from last year. The gross profit as a percentage of net revenues for the current and prior year periods was 29% and 27%, respectively.

The number of projects in-process fluctuates from period to period, as does the average value of projects in-process. The changes from the prior period to the current period are not necessarily representative of future results.

The mix of customers buying our products changed from last year. Sales of the Company's products are made to three general groups of customers: industrial, construction and aerospace / defense. An 83% increase from last year’s level in sales to construction customers who were seeking seismic / wind protection for either construction of new buildings and bridges or retrofitting existing buildings and bridges far surpassed a 35% increase in sales to customers in aerospace / defense and a 5% decrease in sales to customers using our products in industrial applications. A breakdown of sales to these three general groups of customers is as follows:

At May 31, 2014, we had 107 open sales orders in our backlog with a total sales value of $24.6 million. At May 31, 2015, we had 139 open sales orders in our backlog and the total sales value is $25.2 million. $16.0 million of the current backlog is on projects already in progress. $12.4 million of the $24.6 million sales order backlog at May 31, 2014 was in progress at that date. 44% of the sales value in the backlog is for aerospace / defense customers compared to 40% at the end of fiscal 2014. As a percentage of the total sales order backlog, orders from customers in construction accounted for 55% at May 31, 2015 and 58% at May 31, 2014.

The Company's backlog, revenues, commission expense, gross margins, gross profits, and net income fluctuate from period to period. The changes in the current period, compared to the prior period, are not necessarily representative of future results.

Net revenue by geographic region, as a percentage of total net revenue for fiscal years ended May 31, 2015 and 2014 is as follows:

Selling, General and Administrative Expenses

Selling, general and administrative expenses increased by 45% from the prior year. Outside commission expense increased 120% from last year's level. This fluctuation was primarily due to the increase in the level of sales from last year to this as well as an increased use of outside sales representatives. Other selling, general and administrative expenses increased by 26% from last year. This increase is primarily due to an increase in air-freight charges incurred this year in order to meet contractual obligations to deliver products on schedule along with an increase in estimated incentive compensation expense from the prior period related to the higher level of sales and operating results.

The above factors resulted in operating income of $3,061,000 for the year ended May 31, 2015, up 98% from the $1,546,000 in the prior year.

The Company's effective tax rate (ETR) is calculated based upon current assumptions relating to the year's operating results and various tax related items. The ETR for the fiscal year ended May 31, 2015 is 29.2%, slightly more than the ETR for the prior year of 27.9%. A reconciliation of provision for income taxes at the statutory rate to income tax provision at the Company's effective rate is as follows:

Stock Options

The Company has stock option plans which provide for the granting of nonqualified or incentive stock options to officers, key employees and non-employee directors. Options granted under the plans are exercisable over a ten year term. Options not exercised by the end of the term expire.

The Company measures compensation cost arising from the grant of share-based payments to employees at fair value and recognizes such cost in income over the period during which the employee is required to provide service in exchange for the award. The Company recognized $116,000 and $112,000 of compensation cost for the years ended May 31, 2015 and 2014.

The fair value of each stock option grant has been determined using the Black-Scholes model. The model considers assumptions related to exercise price, expected volatility, risk-free interest rate, and the weighted average expected term of the stock option grants. The Company used a weighted average expected term. Expected volatility assumptions utilized in the model were based on volatility of the Company's stock price for the thirty month period immediately preceding the granting of the options. The Company issued stock options in August 2014 and April 2015. The risk-free interest rate is derived from the U.S. treasury yield.

The following assumptions were used in the Black-Scholes model in estimating the fair market value of the Company's stock option grants:

The ultimate value of the options will depend on the future price of the Company's common stock, which cannot be forecast with reasonable accuracy. A summary of changes in the stock options outstanding during the year ended May 31, 2015 is presented below.

Capital Resources, Line of Credit and Long-Term Debt

The Company's primary liquidity is dependent upon its working capital needs. These are primarily inventory, accounts receivable, costs and estimated earnings in excess of billings, accounts payable, accrued commissions, billings in excess of costs and estimated earnings, and debt service. The Company's primary sources of liquidity have been operations and bank financing.

Capital expenditures for the year ended May 31, 2015 were $746,000 compared to $1,356,000 in the prior year. The Company has commitments to make capital expenditures of approximately $75,000 as of May 31, 2015.

The Company has a $6,000,000 demand line of credit from a bank, with interest payable at the Company's option of 30, 60, 90 or 180 day LIBOR rate plus 2.5% or the bank's prime rate less .25%. There is no outstanding balance at May 31, 2015. There was no outstanding balance as of May 31, 2014. The outstanding balance on the line of credit fluctuates as the Company's various long-term projects progress. The line is secured by accounts receivable, equipment, inventory, and general intangibles, and a negative pledge of the Company's real property. This line of credit is subject to the usual terms and conditions applied by the bank and is subject to renewal annually. In conjunction with this line of credit, the Company agreed to the following covenants:

The bank is not committed to make loans under this line of credit and no commitment fee is charged.

Inventory and Maintenance Inventory

Inventory, at $8,663,000 as of May 31, 2015, is 4% lower than the prior year-end. Of this, approximately 88% is work in process, 6% is finished goods, and 6% is raw materials. All of the current inventory is expected to be consumed or sold within twelve months. The level of inventory will fluctuate from time to time due to the stage of completion of the non-project sales orders in progress at the time.

The Company continues to rework slow-moving inventory, where applicable, to convert it to product to be used on customer orders. There was approximately $262,000 of slow-moving inventory used during the year ended May 31, 2015. The Company disposed of approximately $260,000 and $153,000 of obsolete inventory during the years ended May 31, 2015 and 2014, respectively.

Accounts Receivable, Costs and Estimated Earnings in Excess of Billings (“CIEB) and Billings in Excess of Costs and Estimated Earnings (BIEC”)

The Company combines the totals of accounts receivable, the asset CIEB, and the liability BIEC, to determine how much cash the Company will eventually realize from revenue recorded to date. As the accounts receivable figure rises in relation to the other two figures, the Company can anticipate increased cash receipts within the ensuing 30-60 days.

Accounts receivable of $4,755,000 as of May 31, 2015 includes approximately $230,000 of amounts retained by customers on long-term construction projects. The Company expects to collect all of these amounts, including the retained amounts, during the next twelve months. The number of an average day's sales outstanding in accounts receivable (DSO) decreased from 49 days at May 31, 2014 to 40 days at May 31, 2015. The DSO is a function of 1.) the level of sales for an average day (for example, total sales for the past three months divided by 90 days) and 2.) the level of accounts receivable at the balance sheet date. The level of sales for an average day in the fourth quarter of the current year is slightly more than double the level in the fourth quarter of the prior year. The level of accounts receivable at the end of the current year is 64% more than at the end of the prior year. The combination of these two factors caused the DSO to decrease from last year end to this. The increase in the level of accounts receivable was due to a significant increase (106%) in the amount of billings to customers on projects in April and May 2015 over April and May 2014.

The status of the projects in-progress at the end of the current and prior fiscal years have changed in the factors affecting the year-end balances in the asset CIEB, and the liability BIEC:

There are 44% more projects in-process at the end of the current fiscal year as compared with the prior year end and the average value of those projects has increased by 21% between those two dates.

As noted above, CIEB represents revenues recognized in excess of amounts billed. Whenever possible, the Company negotiates a provision in sales contracts to allow the Company to bill, and collect from the customer, payments in advance of shipments. Unfortunately, provisions such as this are often not possible. The $5,170,000 balance in this account at May 31, 2015 is a 118% increase from the prior year-end. Generally, if progress billings are permitted under the terms of a project sales agreement, then the more complete the project is, the more progress billings will be permitted. The Company expects to bill the entire amount during the next twelve months. 57% of the CIEB balance as of the end of the last fiscal quarter, February 28, 2015, was billed to those customers in the current fiscal quarter ended May 31, 2015. The remainder will be billed as the projects progress, in accordance with the terms specified in the various contracts.

As of May 31, 2015, there are sales orders for four projects that are not yet in progress. These projects average $253,000 each in value upon completion. This compares to eight such projects as of the prior year end with an average value of $730,000.

The year-end balances in the CIEB account are comprised of the following components:

As noted above, BIEC represents billings to customers in excess of revenues recognized. The $2,723,000 balance in this account at May 31, 2015 is in comparison to a $851,000 balance at the end of the prior year. The balance in this account fluctuates in the same manner and for the same reasons as the account "costs and estimated earnings in excess of billings", discussed above. Final delivery of product under these contracts is expected to occur during the next twelve months.

The year-end balances in this account are comprised of the following components:

Accounts payable, at $2,703,000 as of May 31, 2015, is significantly (132%) higher than the prior year-end. This increase is due to a greater level of purchased materials required to fill existing customer sales orders. The Company expects the current accounts payable amount to be paid during the next twelve months.

Commission expense on applicable sales orders is recognized at the time revenue is recognized. The commission is paid following receipt of payment from the customers. Accrued commissions as of May 31, 2015 are $763,000. This is 78% more than the $430,000 accrued at the prior year-end. This significant increase is due to the increased level of commissionable sales in the current year over the prior year. The Company expects the current accrued amount to be paid during the next twelve months.

Other accrued expenses of $1,395,000 increased by 11% from the prior year of $1,259,000. This increase is primarily due to an increase in estimated incentive compensation expense from the prior period related to the higher level of operating results.

Management believes that the Company's cash on hand, cash flows from operations and borrowing capacity under the bank line of credit will be sufficient to fund ongoing operations, capital improvements and share repurchases (if any) for the next twelve months.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Smaller reporting companies are not required to provide the information required by this item.

Item 8. Financial Statements and Supplementary Data.

The financial statements and supplementary data required pursuant to this Item 8 are included in this Form 10-K as a separate section commencing on page 23 and are incorporated herein by reference.

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.

There have been no disagreements between the Company and its accountants as to matters which require disclosure.

Item 9A. Controls and Procedures.

(a) Evaluation of disclosure controls and procedures.

The Company's principal executive officer and principal financial officer have evaluated the Company's disclosure controls and procedures as of May 31, 2015 and have concluded that, as of the evaluation date, the disclosure controls and procedures were effective to ensure that information required to be disclosed in the reports that the Company files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the Commission's rules and forms and that information required to be disclosed in the reports the Company files or submits under the Exchange Act is accumulated and communicated to our management, including our chief executive officer and chief financial officer, to allow timely decisions regarding required disclosure.

(b) Management's report on internal control over financial reporting.

The Company's management, with the participation of the Company's principal executive officer and principal financial officer, is responsible for establishing and maintaining adequate internal control over financial reporting. The Company's management has assessed the effectiveness of the Company's internal control over financial reporting as of May 31, 2015. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control -- Integrated Framework, originally issued in 1992. Based on this assessment management has concluded that, as of May 31, 2015, the Company's internal control over financial reporting is effective based on those criteria.

(c) Changes in internal control over financial reporting.

There have been no changes in the Company's internal controls over financial reporting that occurred during the fiscal year ended May 31, 2015 that have materially affected, or are reasonably likely to materially affect, the Company's control over financial reporting.

Item 9B. Other Information.

None.

PART III

The information required by Items 10, 11, 12, 13 and 14 of this part will be presented in the Company's Proxy Statement to be issued in connection with the Annual Meeting of Shareholders to be held on October 23, 2015, which information is hereby incorporated by reference into this Annual Report. The proxy materials, including the Proxy Statement and form of proxy, will be filed within 120 days after the Company's fiscal year end.

PART IV

Item 15. Exhibits and Financial Statement Schedules.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

and

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

[Lumsden & McCormick, LLP Letterhead]

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To The Board of Directors of

Taylor Devices, Inc.

Gentlemen:

We hereby consent to the incorporation by reference in this Annual Report on Form 10-K (Commission File Number 0-3498) of Taylor Devices, Inc. of our report dated August 12, 2015 and any reference thereto in the Annual Report to Shareholders for the fiscal year ended May 31, 2015.

We also consent to such incorporation by reference in Registration Statement Nos. 333-114085, 333-133340, 333-155284 and 333-184809 of Taylor Devices, Inc. on Form S-8 of our report dated August 12, 2015.

/s/Lumsden & McCormick, LLP

Lumsden & McCormick, LLP

Buffalo, New York

August 12, 2015

TAYLOR DEVICES, INC. AND SUBSIDIARY

CONSOLIDATED FINANCIAL STATEMENTS

May 31, 2015

[Lumsden & McCormick, LLP Letterhead]

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Stockholders

Taylor Devices, Inc.

We have audited the accompanying consolidated balance sheets of Taylor Devices, Inc. and Subsidiary as of May 31, 2015 and 2014, and the related consolidated statements of income, stockholders' equity, and cash flows for the years then ended. The Company's management is responsible for these financial statements. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Taylor Devices, Inc. and Subsidiary as of May 31, 2015 and 2014, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

/s/Lumsden & McCormick, LLP

Lumsden & McCormick, LLP

Buffalo, New York

August 12, 2015

1. Summary of Significant Accounting Policies:

Nature of Operations:

Taylor Devices, Inc. (the Company) manufactures and sells a single group of very similar products that have many different applications for customers. These similar products are included in one of six categories; namely, Seismic Dampers, Fluidicshoks®, Crane and Industrial Buffers, Self-Adjusting Shock Absorbers, Liquid Die Springs, and Vibration Dampers for use in various types of machinery, equipment and structures, primarily to customers which are located throughout the United States and several foreign countries. The products are manufactured at the Company's sole operating facility in the United States where all of the Company's long-lived assets reside. Management does not track or otherwise account for sales broken down by these categories.

65% of the Company's 2015 revenue was generated from sales to customers in the United States and 31% was from sales to customers in Asia. Remaining sales were to customers in other countries in North America, Europe and South America.

62% of the Company's 2014 revenue was generated from sales to customers in the United States and 33% was from sales to customers in Asia. Remaining sales were to customers in other countries in North America, Europe, and South America.

Principles of Consolidation:

The accompanying consolidated financial statements include the accounts of the Company and its wholly owned subsidiary, Tayco Realty Corporation (Realty). All inter-company transactions and balances have been eliminated in consolidation.

Subsequent Events:

The Company has evaluated events and transactions for potential recognition or disclosure in the financial statements through the date the financial statements were issued.

Use of Estimates:

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

Cash and Cash Equivalents:

The Company includes all highly liquid investments in money market funds in cash and cash equivalents on the accompanying balance sheets.

Cash and cash equivalents in financial institutions may exceed insured limits at various times during the year and subject the Company to concentrations of credit risk.

Accounts Receivable:

Accounts receivable are stated at an amount management expects to collect from outstanding balances. Management provides for probable uncollectible accounts through a charge to earnings and a credit to a valuation allowance based on its assessment of the current status of individual accounts. Balances that are still outstanding after management has used reasonable collection efforts are written off through a charge to the valuation allowance and a credit to accounts receivable.

Inventory:

Inventory is stated at the lower of average cost or market. Average cost approximates first-in, first-out cost.

Property and Equipment:

Property and equipment is stated at cost net of accumulated depreciation. Deprecation is provided primarily using the straight-line method for financial reporting purposes, and accelerated methods for income tax reporting purposes. Maintenance and repairs are charged to operations as incurred; significant improvements are capitalized.

Cash Value of Life Insurance:

Cash value of life insurance is stated at the surrender value of the contracts.

Revenue Recognition:

Sales are recognized when units are delivered or services are performed. Sales under fixed-price contracts are recorded as deliveries are made at the contract sales price of the units delivered. Sales under certain fixed-price contracts requiring substantial performance over several periods prior to commencement of deliveries, are accounted for under the percentage-of-completion method of accounting whereby revenues are recognized based on estimates of completion prepared on a ratio of cost to total estimated cost basis. Costs include all material and direct and indirect charges related to specific contracts. Other expenses are charged to operations as incurred. Total estimated costs for each of the contracts are estimated based on a combination of historical costs of manufacturing similar products and estimates or quotes from vendors for supplying parts or services towards the completion of the manufacturing process. Adjustments to cost estimates are made periodically, and losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined. If total costs calculated upon completion of the manufacturing process in the current period for a contract are more than the estimated total costs at completion used to calculate revenue in a prior period, then the revenue and profits in the current period will be lower than if the estimated costs used in the prior period calculation were equal to the actual total costs upon completion. In the fiscal year ended May 31, 2015, 70% of total revenue recognized was accounted for using the percentage-of-completion method of accounting while the remaining 30% of revenue was recorded as deliveries were made to our customers. In the fiscal year ended May 31, 2014, 47% of total revenue recognized was accounted for using the percentage-of-completion method of accounting while the remaining 53% of revenue was recorded as deliveries were made to our customers.

For financial statement presentation purposes, the Company nets progress billings against the total costs incurred on uncompleted contracts. The asset, "costs and estimated earnings in excess of billings," represents revenues recognized in excess of amounts billed. The liability, "billings in excess of costs and estimated earnings," represents billings in excess of revenues recognized.

Shipping and Handling Costs:

Shipping and handling costs are classified as a component of selling, general and administrative expenses. The amount of these costs were $247,077 and $108,446 for the years ended May 31, 2015 and 2014.

Income Taxes:

The provision for income taxes provides for the tax effects of transactions reported in the financial statements regardless of when such taxes are payable. Deferred tax assets and liabilities are recognized for the expected future tax consequences of temporary differences between the tax and financial statement basis of assets and liabilities. Deferred taxes are based on tax laws currently enacted with tax rates expected to be in effect when the taxes are actually paid or recovered.

The Company's practice is to recognize interest related to income tax matters in interest income / expense and to recognize penalties in selling, general and administrative expenses. The Company did not have any accrued interest or penalties included in its consolidated balance sheets at May 31, 2015 or 2014. The Company recorded no interest expense or penalties in its consolidated statements of income during the years ended May 31, 2015 and 2014.

The Company believes it is no longer subject to examination by federal and state taxing authorities for years prior to May 31, 2012.

Sales Taxes:

Certain jurisdictions impose a sales tax on Company sales to nonexempt customers. The Company collects these taxes from customers and remits the entire amount as required by the applicable law. The Company excludes from revenues and expenses the tax collected and remitted.

Stock-Based Compensation:

The Company measures compensation cost arising from the grant of share-based payments to employees at fair value and recognizes such cost in income over the period during which the employee is required to provide service in exchange for the award. The stock-based compensation expense for the years ended May 31, 2015 and 2014 was $116,069 and $112,171.

New Accounting Standards:

In May 2014, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) No. 2014-09, Revenue from Contracts with Customers. ASU 2014-09 is a comprehensive new revenue recognition model that requires a company to recognize revenue to depict the transfer of goods or services to a customer at an amount that reflects the consideration it expects to receive in exchange for those goods or services. ASU 2014-09 also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. ASU 2014-09 is effective for annual reporting periods, and interim periods within that period, beginning after December 15, 2016 (fiscal year 2018 for the Company) and early adoption is not permitted. Companies may use either a full retrospective or a modified retrospective approach to adopt ASU 2014-09. The Company has not yet determined the potential effects of the adoption of ASU 2014-09 on its Consolidated Financial Statements.

Other recently issued Accounting Standards Codification (ASC) guidance has either been implemented or are not significant to the Company.

2. Accounts Receivable:

3. Inventory:

4. Costs and Estimated Earnings on Uncompleted Contracts:

Amounts are included in the accompanying balance sheets under the following captions:

5. Maintenance and Other Inventory:

Maintenance and other inventory represent stock that is estimated to have a product life-cycle in excess of twelve-months. This stock represents certain items the Company is required to maintain for service of products sold, and items that are generally subject to spontaneous ordering.

This inventory is particularly sensitive to technical obsolescence in the near term due to its use in industries characterized by the continuous introduction of new product lines, rapid technological advances and product obsolescence. Therefore, management of the Company has recorded an allowance for potential inventory obsolescence.

The provision for potential inventory obsolescence was $180,000 for each of the years ended May 31, 2015 and 2014.

6. Property and Equipment:

Depreciation expense was $740,844 and $699,039 for the years ended May 31, 2015 and 2014.

7. Short-Term Borrowings:

The Company has a credit facility with a $6,000,000 demand line of credit from a bank, with interest payable at the Company's option of 30, 60, 90 or 180 day LIBOR rate plus 2.5% or the bank's prime rate less .25%. The line is secured by accounts receivable, equipment, inventory, general intangibles, and a negative pledge of the Company's real property. This line of credit is subject to the usual terms and conditions applied by the bank and subject to renewal annually.

There is no amount outstanding under the line of credit at May 31, 2015 or May 31, 2014.

The Company uses a cash management facility under which the bank draws against the available line of credit to cover checks presented for payment on a daily basis. Outstanding checks under this arrangement totaled $618,974 and $264,146 as of May 31, 2015 and 2014. These amounts are included in accounts payable.

8. Legal Proceedings:

There are no legal proceedings except for routine litigation incidental to the business.

9. Sales:

The Company manufactures and sells a single group of very similar products that have many different applications for customers. These similar products are included in one of six categories; namely, Seismic Dampers, Fluidicshoks®, Crane and Industrial Buffers, Self-Adjusting Shock Absorbers, Liquid Die Springs, and Vibration Dampers. Management does not track or otherwise account for sales broken down by these categories. Sales of the Company's products are made to three general groups of

customers: industrial, construction and aerospace / defense. A breakdown of sales to these three general groups of customers is as follows:

Sales to seven customers approximated 62% (14%, 12%, 11%, 9%, 6% and two at 5%, respectively) of net sales for 2015. Sales to five customers approximated 50% (20%, 10%, 9%, 6% and 5%, respectively) of net sales for 2014.

10. Income Taxes:

A reconciliation of provision for income taxes at the statutory rate to income tax provision at the Company's effective rate is as follows:

Significant components of the Company's deferred tax assets and liabilities consist of the following:

Realization of the deferred tax assets is dependent on generating sufficient taxable income at the time temporary differences become deductible. The Company provides a valuation allowance to the extent that deferred tax assets may not be realized. A valuation allowance has not been recorded against the deferred tax assets since management believes it is more likely than not that the deferred tax assets are recoverable. The Company considers future taxable income and potential tax planning strategies in assessing the need for a potential valuation allowance. The amount of the deferred tax assets considered realizable however, could be reduced in the near term if estimates of future taxable income are reduced. The Company will need to generate approximately $2.5 million in taxable income in future years in order to realize the deferred tax assets recorded as of May 31, 2015 of $858,900.

The Company and its subsidiary file consolidated Federal and State income tax returns. As of May 31, 2015, the Company had State investment tax credit carryforwards of approximately $261,000 expiring through May 2021.

11. Earnings Per Common Share:

Basic earnings per common share is computed by dividing income available to common stockholders by the weighted-average common shares outstanding for the period. Diluted earnings per common share reflects the weighted-average common shares outstanding and dilutive potential common shares, such as stock options.

A reconciliation of weighted-average common shares outstanding to weighted-average common shares outstanding assuming dilution is as follows:

12. Related Party Transactions:

The Company had no related party transactions for the years ended May 31, 2015 and 2014.

13. Employee Stock Purchase Plan:

In March 2004, the Company reserved 295,000 shares of common stock for issuance pursuant to a non-qualified employee stock purchase plan. Participation in the employee stock purchase plan is voluntary for all eligible employees of the Company. Purchase of common shares can be made by employee contributions through payroll deductions. At the end of each calendar quarter, the employee contributions will be applied to the purchase of common shares using a share value equal to the mean between the closing bid and ask prices of the stock on that date. These shares are distributed to the employees at the end of each calendar quarter or upon withdrawal from the plan. During the years ended May 31, 2015 and 2014, 1,688 ($8.925 to $12.02 price per share) and 1,781 ($8.22 to $8.935 price per share) common shares, respectively, were issued to employees. As of May 31, 2015, 227,911 shares were reserved for further issue.

14. Stock Option Plans:

In 2012, the Company adopted a stock option plan which permits the Company to grant both incentive stock options and non-qualified stock options. The incentive stock options qualify for preferential treatment under the Internal Revenue Code. Under this plan, 160,000 shares of common stock have been reserved for grant to key employees and directors of the Company and 112,750 shares have been granted as of May 31, 2015. Under the plan, the option price may not be less than the fair market value of the stock at the time the options are granted. Options vest immediately and expire ten years from the date of grant.

Using the Black-Scholes option pricing model, the weighted average estimated fair value of each option granted under the plan was $2.42 during 2015 and $2.34 during 2014. The pricing model uses the assumptions noted in the following table. Expected volatility is based on the historical volatility of the Company's stock. The risk-free interest rate for periods within the contractual life of the option is based on the U.S. Treasury yield curve in effect at the time of the grant. The expected life of options granted is derived from previous history of stock exercises from the grant date and represents the period of time that options granted are expected to be outstanding. The Company uses historical data to estimate option exercise and employee termination assumptions under the valuation model. The Company has never paid dividends on its common stock and does not anticipate doing so in the foreseeable future.

The following is a summary of stock option activity:

We calculated intrinsic value for those options that had an exercise price lower than the market price of our common shares as of the balance sheet dates. The aggregate intrinsic value of outstanding options as of the end of each fiscal year is calculated as the difference between the exercise price of the underlying options and the market price of our common shares for the options that were in-the-money at that date (240,750 at May 31, 2015 and 164,500 at May 31, 2014.) The Company's closing stock price was $12.87 and $8.83 as of May 31, 2015 and 2014. As of May 31, 2015, there are 47,250 options available for future grants under the 2012 stock option plan. $160,608 was received from the exercise of share options during the fiscal year ended May 31, 2015.

The following table summarizes information about stock options outstanding at May 31, 2015:

The following table summarizes information about stock options outstanding at May 31, 2014:

15. Preferred Stock:

The Company has 2,000,000 authorized but unissued shares of preferred stock which may be issued in series. The shares of each series shall have such rights, preferences, and limitations as shall be fixed by the Board of Directors.

16. Treasury Stock:

Treasury shares increased from 530,143 at May 31, 2014 to 537,733 at May 31, 2015.

17. Retirement Plan:

The Company maintains a retirement plan for essentially all employees pursuant to Section 401(k) of the Internal Revenue Code. The Company matches a percentage of employee voluntary salary deferrals subject to limitations. The Company may also make discretionary contributions as determined annually by the Company's Board of Directors. The amount expensed under the plan was $68,612 and $64,282 for the years ended May 31, 2015 and 2014.

18. Fair Value of Financial Instruments:

The carrying amounts of cash and cash equivalents, accounts receivable, accounts payable, accrued liabilities, and short-term borrowings approximate fair value because of the short maturity of these instruments.

19. Cash Flows Information: