Annual Statements Open main menu

Titan Machinery Inc. - Annual Report: 2019 (Form 10-K)

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
___________________________________________
FORM 10-K
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
FOR THE FISCAL YEAR ENDED JANUARY 31, 2019
Commission File No. 001-33866
___________________________________________
TITAN MACHINERY INC.
(Exact name of registrant as specified in its charter)
Delaware
(State or Other Jurisdiction of
Incorporation or Organization)
No. 45-0357838
(IRS Employer
Identification No.)
644 East Beaton Drive
West Fargo, ND 58078-2648
(Address of Principal Executive Offices)
(701) 356-0130
(Registrant's telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class: Common Stock, $0.00001 Par Value
Name of each exchange on which registered: The Nasdaq Stock Market LLC
Securities registered pursuant to Section 12(g) of the Act: None
___________________________________________
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o    No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o    No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x    No o
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes x    No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    x
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of "large accelerated filer," "accelerated filer," "smaller reporting company," and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer  o
 
 
 
Accelerated filer  x
Non-accelerated filer  o
 
 
 
Smaller reporting company  o
Emerging Growth Company  o
 
 
 
 
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o    No x
The aggregate market value of our common stock held by non-affiliates as of July 31, 2018 was approximately $279.6 million (based on the last sale price of $15.14 per share on such date as reported on the NASDAQ Global Select Market).
The number of shares outstanding of the registrant's common stock as of March 29, 2019 was 22,213,855 shares.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the proxy statement for the registrant's 2019 Annual Meeting of Stockholders are incorporated by reference into Items 10, 11, 12, 13 and 14 of Part III of this report.
 


Table of Contents

Table of Contents
 
 
Page No.
 
 
 
 
 
 
 
 
We make available, free of charge, copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 on our website, http://www.titanmachinery.com, as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC. We are not including the information on our website as a part of, or incorporating it by reference into, this Form 10-K.

i

Table of Contents


ITEM 1.    BUSINESS
Our Company
Titan Machinery Inc. and its subsidiaries (collectively, "Titan Machinery," the "Company," "we," or "our") own and operate a network of full service agricultural and construction equipment stores in the United States and Europe. We have been an authorized dealer of CNH Industrial N.V. or its U.S. subsidiaries (collectively referred to in this Form 10-K as "CNH Industrial") since our inception in 1980. CNH Industrial is a leading manufacturer and supplier of agricultural and construction equipment, which includes the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. Based upon information provided to us by CNH Industrial, we are the largest retail dealer of Case IH Agriculture equipment in the world, the largest retail dealer of Case Construction equipment in North America and a major retail dealer of New Holland Agriculture and New Holland Construction equipment in the U.S. In addition to the CNH Industrial brands, we sell and service equipment made by a variety of other manufacturers.
We operate our business in three reportable segments, Agriculture, Construction and International, within which we engage in four principal business activities:
new and used equipment sales;
parts sales;
equipment repair and maintenance services; and
equipment rental and other activities.
We offer our customers a one-stop solution by providing equipment and parts sales, equipment repair and maintenance services, and rental functions in each store. Our full service approach provides us with multiple points of customer contact and cross-selling opportunities. We believe our mix of equipment sales and recurring parts and service sales, as well as our diverse geographic footprint, enables us to operate effectively throughout economic cycles. We also believe our scale, customer service, diverse and stable customer base, and experienced management team provide us with a competitive advantage in many of our local markets.
Throughout our 38-year operating history, we have built an extensive, geographically contiguous network of 74 stores in the U.S. and 30 stores in Europe. Our Agriculture stores in the U.S. are located in Iowa, Minnesota, Nebraska, North Dakota and South Dakota and include several highly productive farming regions, such as the Red River Valley in eastern North Dakota and northwestern Minnesota, portions of the corn belt in Iowa, eastern South Dakota and southern Minnesota, and along the I-80 corridor in Nebraska, which sits on top of the Ogallala Aquifer. Our Construction stores are located in Arizona, Colorado, Iowa, Minnesota, Montana, Nebraska, New Mexico, North Dakota, South Dakota, Wisconsin and Wyoming. Our International stores are located in the European countries of Bulgaria, Germany, Romania, Serbia and Ukraine.
We have a history of growth through acquisitions. Since January 1, 2003, we have completed the acquisition of over 50 dealerships located in 11 states and four European countries. We believe that there will continue to be opportunities for dealership consolidation in the future, and we expect that acquisitions will continue to be a component of our long-term growth strategy.
Products and Services
Within each of our segments, we have four principal sources of revenue: new and used equipment sales, parts sales, equipment repair and maintenance services, and equipment rental and other business activities.
New and Used Equipment Sales
We sell new agricultural and construction equipment manufactured under the CNH Industrial family of brands as well as equipment from a variety of other manufacturers. The used equipment we sell is primarily acquired through trade-ins from our customers. The agricultural equipment we sell and service includes machinery and attachments for uses ranging from large-scale farming to home and garden purposes. The construction equipment we sell and service includes heavy construction machinery, light industrial machinery for commercial and residential construction, road and highway construction machinery, and mining operations equipment. Equipment sales generate cross-selling opportunities by populating our markets with equipment we can repair and maintain and for which we sell parts. Equipment revenue represented 72.1%, 70.8% and 69.7% of total revenue for the fiscal years ended January 31, 2019, 2018 and 2017.

1

Table of Contents

Parts Sales
We sell a broad range of maintenance and replacement parts for brands of equipment that we carry, other makes of equipment, and other types of equipment and related components. We maintain an extensive in-house parts inventory to provide timely parts and repair and maintenance support to our customers. Our parts sales provide a relatively stable revenue stream that is less sensitive to economic cycles than our equipment sales. Parts revenue represented 16.7%, 17.0% and 17.8% of total revenue for the fiscal years ended January 31, 2019, 2018 and 2017.
Equipment Repair and Maintenance Services
We provide repair and maintenance services, including warranty repairs, for our customers' equipment. All of our stores have service bays staffed by trained service technicians. In addition, our technicians are able to make off-site repairs at customer locations. We provide proactive and comprehensive customer service by maintaining service histories for each piece of equipment owned by our customers, maintaining 24/7 service hours in times of peak equipment usage, providing on-site repair services, scheduling off-season maintenance activities with customers, notifying customers of periodic service requirements and providing training programs to customers in order to educate them on standard maintenance requirements. Our after-market repair and maintenance services have historically provided a high-margin, relatively stable source of revenue through changing economic cycles. Service revenue represented 6.9%, 7.4%, and 7.9% of total revenue for the fiscal years ended January 31, 2019, 2018 and 2017.
Equipment Rental and Other Business Activities
We rent equipment to our customers, primarily in the Construction segment, on a short-term basis for periods ranging from a few days to a few months. We actively manage the size, quality, age and composition of our rental fleet and closely monitor and analyze customer demand and rate trends. We maintain the quality of our fleet through our on-site parts and services support and dispose of rental equipment through our retail sales force. Our rental activities create cross-selling opportunities in equipment sales, including rent-to-own purchase options. In addition, we provide ancillary equipment support activities such as equipment transportation, Global Positioning System ("GPS") signal subscriptions and other precision farming products, farm data management products, and CNH Industrial finance and insurance products. Equipment rental and other revenue represented 4.3%, 4.7% and 4.6% of total revenue for the fiscal years ended January 31, 2019, 2018 and 2017.
Industry Overview
Agricultural Equipment Industry
Agricultural equipment is purchased primarily by commercial farmers for the production of crops used for food, fiber, feed grain and feedstock for renewable energy. Agricultural equipment is also purchased by "life-style farmers" and for home and garden applications, and maintenance of commercial, residential and government properties. Deere & Company ("Deere"), CNH Industrial, and Agco Corporation ("AGCO") are the largest global manufacturers of agricultural equipment and they manufacture a full line of equipment and parts that supply the primary machinery requirements of farmers. In addition to the major manufacturers, several short-line manufacturers produce specialized equipment that satisfy regional and niche requirements of farmers. Agricultural equipment manufacturers typically grant dealers in the U.S. defined sales and marketing territories with designated store locations to distribute their products.
We believe there are many factors that influence demand for agricultural equipment, parts and repair and maintenance services, including net farm income, commodity markets, production yields, tariffs and trade policies, interest rates, government policies, tax policies, weather and general economic conditions. Any of these conditions can change materially in a short time period, creating volatility in demand for our products and services. Federal legislation, such as the Farm Bill, attempts to stabilize the agriculture industry through various policies including (i) commodity programs consisting of direct, counter-cyclical and price support payments to farmers; (ii) conservation programs; (iii) crop insurance programs; and (iv) disaster relief programs. We believe that these various federal policies reduce financial volatility in the agriculture industry and assist farmers in continuing to operate their farms during economic down cycles.
Construction Equipment Industry
Construction equipment is purchased primarily for use in commercial, residential and infrastructure construction, as well as for agriculture, demolition, mining, energy production and forestry operations. Caterpillar, Inc., Deere, Komatsu Ltd., the Volvo Group, Terex Corporation, Doosan, and CNH Industrial are some of the largest global manufacturers of construction and industrial equipment. The market for construction equipment is segmented across multiple categories including earth moving, lifting, light industrial, asphalt and paving, and concrete and aggregate equipment. As with agricultural equipment, distribution of construction equipment in the U.S. is accomplished primarily through manufacturer authorized dealers.
    

2

Table of Contents

CNH Industrial and industry reports show that demand for construction equipment in our markets is driven by several factors, including (i) public spending on roads, highways, sewer and water projects, and other public works projects; (ii) public and private expenditures for the energy and mining industries, which are driven in part by demand for fossil fuels, metals and other commodities; (iii) business conditions in the agriculture industry; and (iv) general economic and market conditions of the construction sector for residential and commercial buildings.
Business Strengths
We believe the following attributes are important factors in our ability to compete effectively and to achieve our long-term financial objectives:
Centralized Inventory Management
We believe our significant scale enables us to centrally manage our inventory, thus promoting inventory exchanges among our stores, permitting us to more effectively manage inventory levels at each store while still providing a significant breadth of equipment and parts inventories to our customers. Moreover, our floorplan financing capacity enables us to opportunistically acquire and carry inventory to satisfy market demands.
Superior Customer Service at the Local Level
Our actions to centralize numerous administrative functions has enabled our employees in the field to focus on customer service. We believe that the following capabilities enable us to better service our customers:
our ability to staff a large number of highly-trained service technicians across our network of stores, which makes it possible to schedule repair services on short notice without affecting our technician utilization rates;
our ability to staff and leverage product and application specialists across our network of stores, which makes it possible to offer valuable pre-sale and aftermarket services, including equipment training, best practices education and precision farming technology support; and
our ability to innovate and lead our industry through initiatives such as precision farming and farm data management products and services, which provide our customers with the latest advances in technology and operating practices.
We spend significant time and resources training our employees to effectively service our customers in each of our local markets. Our training program involves active participation in all manufacturer-sponsored training programs, the use of industry experts for customized training programs, and a centralized training team to assist in training programs and the integration of newly-acquired operations. We also partner with several technical colleges to sponsor students who we plan to eventually employ as service technicians.
Ability to Act on Acquisition Opportunities
We believe that our experienced management team and access to capital enables us to be opportunistic in responding to accretive growth opportunities, primarily arising from the continued consolidation of the dealer network.
Superior Centralized Marketing Systems
Our shared resource group includes a professional marketing team that supports all aspects of brand and solution awareness, customer analytics and targeting, and lead generation through multichannel campaigns that typically incorporate digital marketing (email, website, search, social, syndication), direct mail, and regional and local advertising and sponsorships. Our marketing functions also drive increased customer engagement and loyalty through participation in trade shows and industry events and communication and coordination for local store open houses, service clinics, equipment demonstrations, product showcases and customer appreciation outings.
Ability to Attract and Retain Superior Employees.
We recognize that attracting and retaining talented employees is essential to achieving outstanding company performance. We strive to develop our employees through a structured training program, and to invest in their general development. In addition, we strive to implement a compensation system that rewards employees for high performance. We believe that our efforts in these areas will enable us to attract and retain superior employees, necessary for us to be successful in our industry.
Diverse and Stable Customer Base Reduces Market Risk
Our large geographic footprint covering 11 U.S. states and five European countries provides a diversified customer base. We believe that this diverse customer base reduces the potential impact of risks associated with customer concentration

3

Table of Contents

and fluctuations in local market conditions. During fiscal 2019, none of our customers accounted for more than 1.0% of our total revenue. Revenue from customers located outside of the United States is primarily included in our International segment, which represented 18.4%, 17.5% and 12.5% of total consolidated revenue during fiscal 2019, 2018 and 2017. In addition, our large geographic footprint enables us to capitalize on crop diversification and disparate weather in growing regions, as well as local trends in residential, infrastructure and commercial construction.
Experienced Management Team
Our executive team is led by David Meyer, our Board Chair and Chief Executive Officer, who has over 40 years of industry experience. Our other executive team members, managers in the field, and equipment sales consultants also have extensive knowledge and experience in our industry. We compensate, develop and review our managers and sales employees based on an approach that aligns their incentives with the goals and objectives of our company, including achievement of revenue, profitability, market share and balance sheet objectives. We believe the strength of our management team will increase our success in the marketplace.
Growth Strategy
We pursue the following growth strategies:
Increasing Same-Store Sales and Market Share
Increasing market share and same-store sales is a priority of ours. Such growth both enhances our current period revenue and increases our potential future revenue during the life of the sold equipment through recurring parts and service business. We seek to generate growth in same-store sales and market share through the following:
employing significant marketing and advertising programs, including targeted direct mailings, internet based marketing, advertising with targeted local media outlets, participation in and sponsorship of trade shows and industry events, our Titan Trader monthly magazine, and by hosting open houses, service clinics, equipment demonstrations, product showcases and customer appreciation outings;
supporting and providing customers with training on evolving technologies, such as precision farming and farm data management, which are difficult for small dealers to support;
maintaining state-of-the-art service facilities, mobile service trucks and trained service technicians to maximize our customers' equipment uptime through preventative maintenance programs and seasonal 24/7 service support; and
centrally managing our inventory to optimize the availability of equipment and parts for our customers.
Strategic Acquisitions
Since January 1, 2003, we have completed the acquisition of over 50 dealerships located in 11 states and four European countries. The agricultural and construction equipment industries are fragmented and consist of many relatively small, independent businesses serving discrete local markets. We believe a favorable climate for dealership consolidation will continue to exist in the future due to several factors, including the competitiveness of our industry, increased dealer capitalization requirements, increased sophistication and complexity of equipment and related technology, increased expectations from growers and original equipment manufacturers, and the lack of succession alternatives for current owners. We intend to continue to evaluate and pursue acquisitions with the objectives of entering new markets, consolidating distribution within our existing network, and strengthening our competitive position. We expect that opportunistic acquisitions will continue to be a component of our long-term growth strategy.
We regularly assess the acquisition landscape, evaluating potential acquisitions in terms of availability and alignment to our long-term growth strategy. Typically, we have acquired only the working capital and fixed assets that we believe are necessary to run an efficient store and we do not generally assume any indebtedness. On occasion, we have acquired all of the outstanding equity of a company. Acquisitions are typically financed with available cash balances, floorplan payable line of credit capacity, and long-term debt.
The consent of CNH Industrial is required to acquire any CNH Industrial dealership. The consent of our lender group, led by Wells Fargo Bank, National Association (collectively referred to as "Wells Fargo"), is required for acquisitions meeting certain thresholds or other criteria as defined in our Second Amended and Restated Credit Facility, as amended (the "Wells Fargo Credit Agreement").

4

Table of Contents

Suppliers
CNH Industrial—Case IH Agriculture, Case Construction, New Holland Agriculture and New Holland Construction
CNH Industrial is a publicly-traded, global leader in the agricultural and construction equipment industries based on industry market share data. In 2018, CNH Industrial generated $14.7 billion in revenue from its equipment operations. CNH Industrial is the world's second largest manufacturer of agricultural equipment, manufacturing the Case IH Agriculture and New Holland Agriculture brands of equipment. Case IH Agriculture, recognized by the red color of its equipment, possesses over 170 years of farm equipment heritage. New Holland Agriculture, recognized by the blue color of its tractors and the yellow color of its harvesting and hay equipment, has over 120 years of farm equipment industry experience. The Case Construction and New Holland Construction brands are owned and operated by CNH Industrial.
In fiscal 2019, CNH Industrial supplied approximately 74% of the new equipment sold in our Agriculture segment, 70% of the new equipment sold in our Construction segment, and 72% of the new equipment sold in our International segment. In addition, CNH Industrial provides financing and insurance products and services to our end-user customers through its affiliated business unit, CNH Industrial Capital America, LLC ("CNH Industrial Capital").
We believe that our relationship with CNH Industrial is more than a typical supply relationship; it is strategic for both our Company and CNH Industrial. In that regard, it is in each company's interest to maintain and develop the longstanding strong relationship we share.
Dealership Agreements
We have entered into separate dealership agreements with CNH Industrial to sell and service the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands (collectively the “CNH Industrial Dealer Agreements”). Separate CNH Industrial Dealer Agreements exist for each of our North American stores or store complexes, and for each of the European countries in which we operate. The structure of the North American and European agreements are very similar. Except as noted, the following discussion describes the North American CNH Industrial Dealer Agreements.
The CNH Industrial Dealer Agreements assign to us a geographically defined area of principal responsibility, providing us with distribution and product support rights within the identified territory for specific equipment products. Although the dealer appointment is non-exclusive, in each territory there is typically only one dealer responsible for retail sales to end-users and for after-sales product support of the equipment. If we sell certain CNH Industrial equipment outside of our designated sales and service areas, CNH Industrial has the right to require that we pay sales and service fees for purposes of compensating the dealer assigned to such territory. We are authorized to display and use CNH Industrial trademarks and trade names at our stores, with certain restrictions.
Under our CNH Industrial Dealer Agreements, we have both the right and obligation to sell CNH Industrial equipment and related parts and products and to provide customers with repair services. The CNH Industrial Dealer Agreements impose various requirements on us regarding the location and appearance of facilities, satisfactory levels of new equipment and parts inventories, the training of personnel, adequate business enterprise and information technology system, adequate working capital, a maximum adjusted debt to tangible net worth ratio, development of annual sales and marketing goals, and furnishing of monthly and annual financial information to CNH Industrial. We must obtain the approval or consent of CNH Industrial in the event of proposed fundamental changes to our ownership, governance or business structure (defined as "change in control" events) including, among other things, (i) a merger, consolidation or reorganization, unless securities representing more than 50% of the total combined voting power of the successor corporation are immediately owned, directly or indirectly, by persons that owned our securities prior to the transaction; (ii) a sale of all or substantially all of our assets; (iii) any transaction or series of transactions resulting in a person or affiliated group acquiring 30% or more of the combined voting power of our securities or, in the case of a competitor of CNH Industrial, 20% or more of the combined voting power of our securities; (iv) a substantial disposition of shares of our common stock by certain named executives; (v) certain significant changes in the composition of our Board of Directors; and (vi) replacement of our Chief Executive Officer. The CNH Industrial Dealer Agreements do not establish mandatory minimum or maximum retail pricing for our equipment or parts sales or service offerings.
The Case IH Agricultural dealership agreement and the Case Construction dealership agreement have fixed terms expiring on December 31, 2027, and renew automatically for successive 5-year terms unless either party notifies the other party of its intention not to renew or otherwise exercises its termination rights under the agreement. The New Holland dealership agreement has a fixed term expiring December 31, 2019, with automatic 1-year renewals unless either party notifies the other party of its intention not to renew or otherwise exercises its termination rights under the agreement.
CNH Industrial has the right to terminate its dealer agreements with us immediately in certain circumstances, including in the event of (i) our insolvency or bankruptcy, (ii) a material breach by us of the provisions of a CNH Industrial

5

Table of Contents

Dealer Agreement or (iii) our failure to secure the consent of CNH Industrial prior to the occurrence of “change in control” events. The CNH Industrial Dealer Agreements governing Case Construction equipment grants CNH Industrial the right to terminate these CNH Industrial Dealer Agreements for any reason upon 120 days prior written notice. In addition, we have the right to terminate any of the CNH Industrial Dealer Agreements at any time, with or without cause, upon 60 days prior written notice. Subject to protections provided under state dealer protection laws, in the event that CNH Industrial offers a new dealer agreement or an amendment to the existing CNH Industrial Dealer Agreements to all authorized CNH Industrial dealers located in the state, CNH Industrial is permitted to terminate our existing CNH Industrial Dealer Agreements for stores located in that state upon at least 180 days prior written notice if we refuse or otherwise fail to enter into such new agreements or amendments. In addition, to the extent CNH Industrial determines that we are not meeting our obligations under the CNH Industrial Dealer Agreement with respect to a particular product, CNH Industrial may, upon 60 days prior written notice to us, remove such product from the authorized product list allowed to be sold or serviced by us. In the event of termination of any of the CNH Industrial Dealer Agreements, CNH Industrial is obligated to repurchase the inventory of the CNH Industrial brand applicable to the agreement being terminated. The CNH Industrial Dealer Agreements generally do not include non-compete provisions that apply during or after the term of such agreements or limit our operations apart from our designated CNH Industrial dealership store locations. Our CNH Dealer Agreements for Case Construction equipment, absent consent of CNH Industrial, restrict our ability to sell competing products (new equipment and parts) of other manufacturers at our Case dealership store locations during the term of such agreements. Our CNH Industrial Dealer Agreements require us to operate any material business activities not related to sales of CNH Industrial products or services to customers in agricultural, construction, industrial or similar markets separately from our CNH Industrial dealership business.
The CNH Industrial Dealer Agreements and industry practices generally provide that payment on equipment and parts purchased from CNH Industrial entities is due within 30 days and equipment inventory is typically subject to floorplan payable financing. CNH Industrial makes available to us any floorplan programs, parts return programs, sales or incentive programs or similar plans or programs it offers to its other dealers, and provides us with promotional items and marketing materials.
The CNH Industrial Dealer Agreements for our European operations grant to us exclusive territories. In turn, we are restricted in our ability to sell competing products in our assigned territories. Our CNH Dealer Agreements of our European operations do not have a fixed term. CNH Industrial can terminate these agreements immediately in certain circumstances constituting cause, and for any reason upon twenty-four (24) months' prior written notice.
Other Suppliers
In addition to products supplied by CNH Industrial, we sell a variety of new equipment and parts inventories supplied by other manufacturers. These products tend to address specialized niche markets and complement the CNH Industrial products we sell by filling gaps in the CNH Industrial line of products. We believe our offering of products for specialized niche markets supports our goal of being a one-stop solution for equipment needs at each of our stores. Approximately 28% of our total new equipment sales in fiscal 2019 resulted from sales of products manufactured by companies other than CNH Industrial, with our single largest manufacturer other than CNH Industrial representing approximately 3% of our total new equipment sales. The terms of our arrangements with these other suppliers vary, but most of the dealership agreements contain termination provisions allowing the supplier to terminate the agreement after a specified notice period, which is typically 30 days. Payment and financing practices with these other suppliers are similar to those practices described above with respect to the CNH Industrial entities.
Customers
Our North America agriculture customers vary from small, single machine owners to large farming operations, primarily in the states of Iowa, Minnesota, Nebraska, North Dakota and South Dakota. In fiscal 2019, no single agriculture customer accounted for more than 1.0% of our Agriculture revenue.
Our Construction customers include a wide range of construction contractors, public utilities, mining, forestry, and energy companies, farmers, municipalities and maintenance contractors, primarily in the states of Arizona, Colorado, Iowa, Minnesota, Montana, Nebraska, New Mexico, North Dakota, South Dakota, Wisconsin and Wyoming. They vary in size from small, single machine owners to large firms. In fiscal 2019, no single construction equipment customer accounted for more than 2.0% of our Construction revenue.
Our International customers vary from small, single machine owners to large farming operations, primarily in the European countries of Bulgaria, Germany, Romania, Serbia and Ukraine. We also sell Case construction equipment in Bulgaria, Romania, and Ukraine. In fiscal 2019, no single international customer accounted for more than 4.0% of our International revenue.

6

Table of Contents

Floorplan Payable Financing
We attempt to maintain at each store, or have readily available at other stores in our network, sufficient new equipment inventory to satisfy customer demand. Inventory levels fluctuate throughout the year and tend to increase before the primary sales seasons for agricultural equipment. The cost of floorplan payable financing is an important factor affecting our financial results.
CNH Industrial Capital offers floorplan payable financing to CNH Industrial dealers to finance the purchase of inventory from CNH Industrial and for used equipment inventory purchased on trade-ins from our customers. CNH Industrial Capital provides this financing in part to enable dealers to carry representative inventories of equipment and encourage the purchase of goods by dealers in advance of seasonal retail demand. CNH Industrial Capital charges variable market rates of interest based on the prime rate on balances outstanding after any interest-free periods and receives a security interest in inventory and other assets. Interest-free periods are generally about four months in duration for both new and used agriculture and construction equipment. CNH Industrial Capital also provides floorplan financing for used equipment accepted in trade, repossessed equipment and approved equipment from other suppliers, and receives a security interest in such equipment. As of January 31, 2019, we had a $400.0 million floorplan credit facility with CNH Industrial Capital.
In addition to the CNH Industrial Capital floorplan line of credit, as of January 31, 2019, we also had a $140.0 million wholesale floorplan line of credit under the Wells Fargo Credit Agreement, and a $45.0 million credit facility with DLL Finance LLC that can be used to finance inventory purchases. In addition, we have other lines of credit offered by various financial institutions as well as floorplan payable financing programs offered by manufacturers and suppliers, or their third party lenders, from which we purchase equipment inventory.
Sales and Marketing
We currently market our products and services through:
our sales employees, who operate out of our network of local stores and call on customers in the markets surrounding each store;
our area product support managers, and our store parts managers and service managers, who provide our customers with comprehensive after-market support;
our website;
local and regional advertising efforts, including broadcast, cable, print and web-based media; and
alternative channels, such as auctions, for selling our aged equipment inventories.
Equipment Sales Consultants and Centralized Support
Our equipment sales employees (who hold the job title "equipment sales consultant") perform a variety of functions, such as servicing customers at our stores, calling on existing customers, and soliciting new business at farming, construction and industrial sites. We develop customized marketing programs for our sales force by analyzing each customer group for profitability, buying behavior and product selection. All members of our sales force are expected to participate in internal and external manufacturer-sponsored training sessions to develop product and application knowledge, sales techniques and financial acumen. Our shared resources group provides centralized sales and marketing support for our field operations, and coordinates centralized media buys, strategic planning, sales support and training. In addition, we enable our regional and area managers and their sales teams to develop localized sales and marketing strategies.
Parts Managers and Service Managers
Our parts managers and service managers are involved in our efforts to market parts and service, taking advantage of our seasonal marketing campaigns in parts and service sales. As a group, they have won multiple awards from our suppliers for their efforts benefiting both our customers and our key suppliers.
Website
Our used equipment inventories are marketed on our website, www.titanmachinery.com, through an equipment search feature which allows users to search by equipment type, manufacturer, price and/or store. A picture of each piece of equipment is shown, along with the equipment specifications, price and store location. Parts manufactured by the CNH Industrial brands are marketed and can be purchased directly through our website. Other sales and financing programs are also marketed through our website. Finally, our website provides dealer locator search functions and provides the contact information for the various departments at each of our stores.

7

Table of Contents

Print, Broadcast and Web-Based Advertising Campaigns
Each year we initiate several targeted direct mail, print and broadcast advertising and marketing campaigns. CNH Industrial and other suppliers periodically provide us with advertising funds, which we primarily use to promote new equipment, parts and financing programs. We will continue to explore and launch additional sales channels as appropriate, including, for example, additional internet-based efforts.
Channels for Selling Aged Equipment Inventory
In certain circumstances, we sell aged equipment inventories through the use of alternative channels such as onsite and online auctions.
Competition
The agricultural and construction equipment sales and distribution industries are highly competitive and fragmented, with large numbers of companies operating on a regional or local scale. Our competitors range from multi-location, regional operators to single-location dealers and include dealers and distributors of competing equipment brands, including Deere, Caterpillar and the AGCO brands, as well as other dealers and distributors of the CNH Industrial family of brands. Competition among equipment dealers, whether they offer agricultural or construction products or both, is primarily based on the price, value, reputation, quality and design of the products, customer service including repair and maintenance service provided by the dealer, the availability of equipment and parts, and the accessibility of stores. While we believe we compete favorably on each of these competitive factors, our sales and margins may be impacted by (i) aggressive pricing competition through manufacturer discount programs or other competitive pricing tactics, (ii) our ability to obtain higher service margins based on our service quality and reputation, and (iii) our ability to attract new and maintain existing customers based on the availability and quality of the products we offer and our local relationships and reputation.
We are one of the principal regional-scale agricultural and construction equipment dealers in the U.S. and Europe. The number of other agricultural and construction equipment dealers operating on a regional scale is limited. Our primary regional-scale competitors include RDO Equipment Co., Butler Machinery, Ziegler Inc., Brandt Holdings Co., Wagner Equipment Co., and Van Wall Equipment.
Corporate Information
We were incorporated as a North Dakota corporation in 1980 and reincorporated in Delaware in December 2007 prior to our initial public offering. Our executive offices are located at 644 East Beaton Drive, West Fargo, ND 58078-2648. Our telephone number is (701) 356-0130. We maintain a website at www.titanmachinery.com. Our SEC filings are available on the Investor Relations page of our website or at www.sec.gov.
Intellectual Property
We have registered trademarks for certain names and designs used in our business and have trademark applications pending for certain others. We generally operate each of our stores under the Titan Machinery name. Case IH, Case and New Holland are registered trademarks of CNH Industrial, which we use in connection with advertisements and sales as authorized under our CNH Industrial Dealer Agreements. We also license trademarks and trade names of new equipment from other suppliers of equipment to us.
Product Warranties
Product warranties for new equipment and parts are provided by the original equipment manufacturer ("OEM"). The term and scope of these warranties vary greatly by OEM and by product. At the time equipment is purchased, we also offer customers the option of purchasing extended warranty protection provided by the OEM or through various third-party warranty providers. We are paid by the OEM for repairs we perform to equipment under warranty. We generally sell used equipment "as is" and without OEM warranty unless the original warranty period has not expired and is transferable. We also offer extended warranty programs on certain used equipment through various third-party warranty providers.
Seasonality & Weather
The agricultural and construction equipment businesses are highly seasonal, which causes our quarterly results and our cash flow to fluctuate during the year. Our customers generally purchase and rent equipment in preparation for, or in conjunction with, their busy seasons. For farmers, the busy seasons are spring planting and fall harvesting. For Construction customers, the busy season is typically the second and third quarters of our fiscal year for much of our Construction footprint, subject to weather conditions. Our parts and service revenues are typically highest during our customers' busy seasons as well, due to the increased use of their equipment during this time, which generates the need for more parts and service work. Weather

8

Table of Contents

conditions impact the timing of our customers' busy times, which may cause our quarterly financial results to differ between fiscal years. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of funds from completed harvests and construction projects.
Seasonal weather trends, particularly severe wet or dry conditions, can have a significant impact on regional agricultural and construction market performance by affecting crop production yields and the ability to undertake construction projects. Weather conditions that adversely affect the agricultural or construction markets would have a negative effect on the demand for our products and services.
In addition, numerous external factors such as credit markets, commodity prices, production yields, and other circumstances may disrupt normal purchasing practices and buyer sentiment, further contributing to the seasonal fluctuations.
Employees
As of January 31, 2019, we employed 1,550 full-time and 111 part-time employees. Our employees are not covered by a collective bargaining agreement. We believe our relations with our employees are good.
Governmental Regulation
We are subject to numerous federal, state, and local rules and regulations, including regulations promulgated by the Environmental Protection Agency and similar state agencies, with respect to storing, shipping, disposing, discharging and handling hazardous materials and hazardous and non-hazardous waste. The environmental regulations applicable to us are associated with the repair and maintenance of equipment at our stores including the handling and disposal of oil, fluids, wastewater and solvent cleaners. Currently, none of our stores or operations exceeds small quantity generation status. Compliance with these rules and regulations has not had any material effect on our operations, nor do we expect it to in the future. Further, we have not made, and do not anticipate making, any material capital expenditures related to compliance with environmental regulations.
ITEM 1A.    RISK FACTORS
We are substantially dependent upon CNH Industrial, our primary supplier of equipment and parts inventory.
The majority of our business involves the distribution and after-market parts and servicing of equipment manufactured by CNH Industrial. In fiscal 2019, CNH Industrial supplied approximately 74% of the new equipment sold in our Agriculture segment, 70% of the new equipment sold in our Construction segment, and 72% of the new equipment sold in our International segment, and supplied a significant portion of our parts inventory. Our financial performance and future success are highly dependent on the overall reputation and success of CNH Industrial in the agricultural and construction equipment manufacturing industries, including its ability to maintain a competitive position in product innovation, product quality, and product pricing. In the event that CNH Industrial decided to sell, or reduce its commitment to, its equipment manufacturing segments or if CNH Industrial changes its distribution system to our detriment, this would have a material adverse effect on our financial condition and results of operations.
In addition, CNH Industrial provides to us the following:
Floorplan payable financing for the purchase of a substantial portion of our equipment inventory;
A significant percentage of the financing used by our customers to purchase CNH Industrial equipment from us;
Reimbursement for warranty work performed by us pursuant to CNH’s product warranties;
Incentive programs and discount programs from time to time that enable us to price our products more competitively; and
Promotional and marketing activities on national, regional and local levels.
CNH Industrial may in the future decide to limit or decrease the availability of financing, warranty reimbursements, discounts and rebates, or other marketing incentives. Our financial performance is impacted by CNH Industrial’s continued commitment to these programs, enabling us to effectively compete in our markets.
CNH Industrial may change or terminate our CNH Industrial Dealer Agreements.
We have entered into CNH Industrial Dealer Agreements under which we sell CNH Industrial’s branded agricultural and construction equipment, along with after-market parts and repair services. Subject to applicable state statutes that may govern the dealer-manufacturer legal relationship, CNH Industrial may terminate our CNH Industrial Dealer Agreements

9

Table of Contents

immediately in certain circumstances, following written notice and cure periods for certain breaches of the agreement, and for any reason under the Case Construction agreement following 120 days prior written notice. If CNH Industrial were to terminate all or any of its CNH Industrial Dealer Agreements with us, our business would be severely harmed.
Furthermore, CNH Industrial may unilaterally change its operating practices under the terms of its CNH Industrial Dealer Agreements with us to, among other things, change or authorize additional dealers in our sales and service areas, limit our product offerings, and change pricing or delivery terms. If CNH Industrial were to change the terms of our CNH Industrial Dealer Agreements or its operating practices in a manner that adversely affects us, our business and results of operations would be harmed.
Our CNH Industrial Dealer Agreements impose obligations and restrictions on us.
Under our CNH Industrial Dealer Agreements, we are obligated to actively promote the sale of CNH Industrial equipment within our designated geographic areas of responsibility, fulfill the product warranty obligations of CNH Industrial (subject to CNH Industrial’s payment to us of the agreed upon reimbursement), maintain adequate facilities and workforce to service the needs of our customers, and maintain equipment and parts inventories at the level deemed necessary by CNH Industrial to meet sales goals as stated in the annual business plan mutually agreed upon by us and CNH Industrial, maintain adequate working capital, and maintain stores only in authorized locations. Our CNH Industrial Dealer Agreements do not provide us with exclusive dealerships in any territory (except in our European territories), and CNH Industrial could elect to create additional dealers in our market areas in the future, subject to restrictions imposed by state laws.
Consent of CNH Industrial is required for certain material changes in our ownership, governance or business structure, including the acquisition by any person or group of persons of 30% or more of our outstanding stock or 20% or more of our outstanding stock if the person or group is a competitor of CNH Industrial. This requirement may have the effect of discouraging a sale or other change in control of the Company, including transactions that our stockholders might otherwise deem to be in their best interests.
The acquisition of additional CNH Industrial geographic areas of responsibility and store locations in our Agriculture, Construction and International segments requires the consent of CNH Industrial under our CNH Industrial Dealer Agreements, subject to contrary state dealer protection laws. We cannot assume that CNH Industrial will consent to any acquisition of any stores or dealerships that we may desire to make in the future.
Our CNH Industrial Dealer Agreements require us to operate any material business activities not related to sales of CNH Industrial products or services to customers in agricultural, construction, industrial or similar markets separately from our CNH Industrial dealership business. Our CNH Industrial Dealer Agreement for Case Construction equipment prohibits us from carrying other suppliers' products (new equipment and parts) at our Case Construction stores that are competitive with CNH Industrial's products. These restrictions may discourage or prevent us from pursuing business activities that we believe are in the best interests of our stockholders.
Our agricultural equipment, parts and service sales are affected by numerous market factors outside of our control.
Farmers' capital expenditures often follow a cyclical pattern, with increased capital investments typically occurring during boom cycles spurred by high net farm income and strong farm balance sheets. The USDA has forecasted net farm income, a broad measure of farm profitability, to be $63.1 billion for calendar year 2018, which is approximately 15.0% below the average for the five-year period ended December 31, 2018. Net farm income is subject to numerous external factors such as commodity prices, input costs, production yields, animal diseases and crop pests, federal crop insurance and subsidy programs. Net farm income also impacts farmland values, which causes overall farm wealth to increase or decrease, impacting farmers’ sentiment to make investments in equipment. The nature of the agricultural equipment industry is such that a downturn in demand can occur suddenly, resulting in negative impact on dealers including declining revenues, reduced profit margins, excess equipment inventories, and increased floorplan interest expenses. These downturns may be prolonged, and during these periods, our revenues and profitability could be harmed. Demand for our parts and service, although not as cyclical as equipment purchases, can also be negatively affected in agricultural downturns and in regions affected by adverse weather or growing conditions which result in less acres planted or harvested.
Our construction equipment, parts and service sales are affected by numerous market factors outside of our control.
Our construction equipment customers primarily operate in the natural resource development, construction, transportation, agriculture, manufacturing, industrial processing and utilities industries, which industries generally are capital intensive and cyclical in nature. Many of our construction equipment customers are directly and indirectly affected by fluctuations in commodity prices in the agriculture, forestry, metals and minerals, petroleum and natural gas industries. Prolonged periods of low oil prices and other commodities may cause reduced activity in these sectors which may result in decreased demand for our products and services by our customers operating in these industries.

10

Table of Contents

Construction contractors' demand for our construction equipment, parts and services is affected by economic conditions at both a global and a local level. Economic conditions that negatively affect the construction industry, such as the tightening of credit standards which affect the ability of consumers or businesses to obtain financing, could reduce our customers' demand for our construction equipment. The construction industry in many of our geographical areas has experienced periodic, and sometimes prolonged, economic down cycles, which negatively impacts sales of construction equipment in those markets. During these downturns our revenues and profitability could be harmed.
Our customers’ ability to obtain affordable financing is an important factor in their purchasing decisions, and directly affects our business.
The ability to obtain affordable financing is an important part of a customer's decision to purchase agricultural or construction equipment. Tight credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets have the potential to adversely affect available credit for our customers. As net farm income and farm wealth have decreased in recent years, the borrowing capacity of our farmer customers may have also decreased. Moreover, in a tighter credit environment, agricultural lenders may discourage their farmer customers from making non-essential capital expenditures.
Interest rate increases may make equipment purchases less affordable for customers and, as a result, our revenue and profitability may decrease. We are unable to anticipate the timing and impact of interest rate adjustments.
Changes in governmental policies may reduce demand for agricultural and construction equipment and cause our revenue to decline.
Changes in federal, state, and international agricultural policies could adversely affect sales of agricultural equipment. Government programs and subsidies that reduce economic volatility, incentivize agricultural equipment purchases, and enhance farm income positively influence farmers' demand for agricultural equipment. To the extent that future funding or farm programs available to individual farmers are reduced, these changes could reduce demand for agricultural equipment and we could experience a decline in revenue. Changes in government spending on infrastructure projects could adversely affect the demand for construction equipment and we could experience a decline in revenue. The ability to export agricultural products is critical to our agriculture customers. As a result, government trade policies impacting or limiting the export or import of agricultural commodities, such as the China tariffs on soybeans, could have a material adverse effect on the international flow of agricultural and other commodities, which may cause a decrease in the demand for agricultural equipment. Furthermore, the U.S. federal government has initiated tariffs, such as the current steel tariff, on certain foreign goods, including raw materials, commodities, and products manufactured outside the United States that are used in our manufacturers’ production processes. These tariffs could in turn increase our cost of sales as a result of price increases implemented by domestic suppliers, which we may not be able to pass on to our customers. 
Our financial performance is affected by general industry-wide supply of equipment inventory, over which we have no control.
Over-production of equipment by one or more manufacturers, or a sudden reduction in demand for equipment, can dramatically disrupt the equipment market and cause downward pressure on our equipment profit margins. Customer leasing arrangements in the agriculture and construction equipment industries may also impact the level of industry-wide equipment inventory supplies. When this leased equipment comes off lease or rental fleet equipment is sold, there may be an increase in the availability of late-model used equipment, which can create an inventory over-supply condition and put pressure on our equipment sales and margins, and have an adverse effect on values of our used equipment inventory and rental fleet equipment.
Our financial performance is dependent on our ability to effectively manage our inventory.
Our agricultural and construction equipment dealership network requires substantial inventories of equipment and parts to be maintained at each store to facilitate sales to customers on a timely basis. Our equipment inventory has traditionally represented 50% or more of our total assets. We need to maintain a proper balance of new and used equipment to assure satisfactory inventory turnover and to minimize floorplan financing costs.
Our purchases of new equipment and parts are based primarily on projected demand. If actual sales are materially less than our forecasts, we would experience an over-supply of new equipment inventory. An over-supply of new equipment inventory will generally cause downward pressure on our product sale prices and margins, decrease our inventory turns, and increase our floorplan financing expenses.
Our used equipment is generally acquired as “trade-ins” from customers in connection with equipment sales to those customers. Equipment inventories are stated at the lower of cost or market value. Adjustments to market value are recognized in earnings in the periods in which they occur. Our estimates of market value for our used equipment may prove to be

11

Table of Contents

inaccurate, given the potential for sudden change in market conditions and other factors beyond our control. Changes from our normal retail marketing channel to more aggressive marketing channels for specific pieces or categories of equipment inventory, particularly as equipment inventory ages, will generally cause a downward modification to our estimate of market value, which may result in further downward cost or market adjustments. Pricing and sales of used equipment can be significantly affected by the limited market for certain types of used equipment.
Our international operations expose us to additional risks.
We currently operate dealership locations in Bulgaria, Germany, Romania, Serbia and Ukraine. In fiscal 2019, total International segment revenues were 18.4% of our consolidated total revenue. As of January 31, 2019, total International segment assets were 21.5% of our consolidated total assets.
Our operations in international markets subject us to risks related to the differing legal, political, social and regulatory environments and economic conditions in the countries in which we operate. Risks inherent in our international operations include:
difficulties in implementing our business model in foreign markets;
costs and diversion of domestic management attention related to oversight of international operations;
unexpected adverse changes in export duties, quotas and tariffs and difficulties in obtaining import licenses;
cyclicality of demand in European Union member states for agricultural equipment, based on availability of European Union government subsidy programs and tax incentives;
unexpected adverse changes in foreign laws or regulatory requirements;
compliance with a variety of tax regulations, foreign laws and regulations;
compliance with the Foreign Corrupt Practices Act and other U.S. laws that apply to the international operations of U.S. companies which may be difficult and costly to implement and monitor, can create competitive disadvantages if our competitors are not subject to such laws, and which, if violated, may result in substantial financial and reputational harm;
fluctuations in foreign currency exchange rates to which we are exposed may adversely affect the results of our operations, the value of our foreign assets and liabilities and our cash flows;
the laws of the European countries in which we operate, unlike U.S. states, do not include specific dealer protection laws and, therefore, we may be more susceptible to actions of suppliers that are adverse to our interests such as termination of our dealer agreements for any reason or installing additional dealers in our designated territories; and
geo-political or economic instability.
An escalation of political tensions or economic instability in Ukraine could create disruption in our Ukrainian operations. Previous periods of political tension and economic instability in Ukraine caused liquidity problems for our customers, which negatively impacted their purchasing decisions for our products and services, limited our ability to maintain working capital loans or increased the cost of maintaining such loans, and as a result of imposed currency exchange controls, restricted our ability to manage our cash held in Ukraine and our investment in our Ukrainian business. Our operations in Ukraine are subject to the risks of further devaluation of the local currency, increased interest rates and increased inflation.
These factors, in addition to others that we have not anticipated, may negatively impact our financial condition and results of operations.
Floorplan financing for our equipment inventory may not be available on favorable terms, which would adversely affect our growth and results of operations.
We generally purchase our equipment with the assistance of floorplan payable financing programs through CNH Industrial Capital and our other credit facilities. In the event that our available financing sources are insufficient to satisfy our future requirements, we would be required to obtain financing from other sources. We may not be able to obtain this additional or alternative financing on commercially reasonable terms or at all. To the extent that this financing cannot be obtained on commercially reasonable terms or at all, our growth and results of operations would be adversely affected.

12

Table of Contents

Our level of indebtedness could limit our financial and operational flexibility.
As of January 31, 2019, our indebtedness included floorplan payable financing, long-term debt, and our Senior Convertible Notes. In addition, we have obligations under our lease agreements for our store locations and corporate headquarters.
Our level of indebtedness could have important consequences. For example, it could:
increase our vulnerability to general adverse economic and industry conditions;
limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate; and
limit our ability to obtain additional financing for working capital, capital expenditures, acquisitions or general corporate purposes.
We expect to use cash flow from operations and borrowings under our credit facilities to fund our operations, debt service and capital expenditures. However, our ability to make these payments depends on our future performance, which will be affected by financial, business, economic and other factors, many of which may be beyond our control.
The credit agreements governing our indebtedness restrict our ability to engage in certain corporate and financial transactions, and require us to satisfy financial covenants.
The credit agreements governing our indebtedness contain covenants that, among other things, restrict our ability to:
incur more debt;
make investments;
create liens;
merge or consolidate;
transfer and sell assets;
pay dividends or repurchase stock; and
issue equity instruments.
Our credit facilities with CNH Industrial Capital and DLL Finance require us to satisfy a net leverage ratio and fixed charge coverage ratio on an ongoing basis, measured at the end of each fiscal quarter. Under our Wells Fargo Credit Agreement, in the event that excess availability plus eligible cash collateral is less than 15% of the total facility of $200.0 million, we are required to maintain a minimum fixed charge coverage ratio. Our ability to borrow under these credit agreements depends upon compliance with these financial covenants.
Our failure to satisfy any covenant, absent a waiver or amendment, would cause us to be in default under our credit facilities and would enable our lenders to accelerate payment of the outstanding indebtedness. Each of our credit agreements include cross-default provisions which state that certain types of defaults under any other indebtedness agreement will also constitute a default under that credit agreement. If an event of default occurred, and the lender demanded accelerated payment, we may not be able to satisfy a pay-off request, whether through internal funds or a new financing.
Our variable rate indebtedness exposes us to interest rate risk.
A substantial portion of our floorplan and working capital borrowings, including the credit facilities with CNH Industrial Capital, Wells Fargo, DLL Finance, and our international floorplan facilities are at variable rates of interest and expose us to interest rate risk. As such, our results of operations are sensitive to movements in interest rates. There are many economic factors outside our control that have in the past and may, in the future, impact rates of interest including publicly announced indices that underlie the interest obligations related to a certain portion of our debt. Factors that impact interest rates include governmental monetary policies, inflation, recession, changes in unemployment, the money supply, and international instability impacting domestic and foreign financial markets. Any increases in interest rates could have a material adverse effect on our financial conditions and results of operations.
Our outstanding Senior Convertible Notes may cause dilution to our existing stockholders and may negatively affect our financial position and liquidity.
On April 24, 2012, we issued $150 million aggregate principal amount of 3.75% Senior Convertible Notes due May 2019 (the "Senior Convertible Notes"). The Senior Convertible Notes are convertible into common stock at the option of the holders under certain conditions. Upon conversion, we will pay cash up to the aggregate principal amount of converted notes

13

Table of Contents

and pay or deliver, as the case may be, cash, shares of our common stock or a combination thereof, at our election, for any conversion obligation in excess thereof. The Senior Convertible Notes include customary events of default, including, but not limited to, cross acceleration to certain other indebtedness of us and our subsidiaries. In the case of an event of default, all outstanding Senior Convertible Notes may become due and payable immediately without further action or notice.
The Senior Convertible Notes are convertible into the Company's common stock at a conversion rate of 23.1626 shares of common stock per $1,000 principal amount of convertible notes, with an effective conversion price of $43.17 per share of common stock. In the event that our share price exceeds the conversion price of $43.17 per share of common stock on the date of conversion or maturity, our existing stockholders will experience dilution if we issue shares of our common stock to satisfy the conversion obligation in excess of the outstanding principal balance of the Senior Convertible Notes.
The Senior Convertible Notes mature on May 1, 2019, unless earlier purchased by the Company, redeemed or converted. As of January 31, 2019, the Company has repurchased an aggregate of $104.4 million face value of its Senior Convertible Notes. As a result, as of January 31, 2019, the remaining face value amount outstanding of Senior Convertible Notes is $45.6 million. We expect to use cash flow from operations and borrowings under other credit facilities to repay our Senior Convertible Notes at the maturity date. However, our ability to make such payments depends on our future financial performance and the available borrowing capacity under our various other credit facilities.
The agricultural and construction equipment industries are highly seasonal, which can cause significant fluctuations in our results of operations and cash flow.
The agricultural and construction equipment businesses are highly seasonal, which causes our quarterly results to fluctuate during the year. Farmers generally purchase agricultural equipment and service work in preparation for, or in conjunction with, the spring planting and fall harvesting seasons. Construction equipment customers’ purchases of equipment and service work, as well as rental of equipment, are also seasonal in our stores located in colder climates where construction work slows significantly in the winter months. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of farmers’ funds from completed harvests and construction customers' funds from completed projects. Also, numerous external factors such as credit markets, commodity prices, weather conditions, and other circumstances may disrupt normal purchasing practices and customers’ sentiment, further contributing to the seasonal fluctuations.
Weather conditions may negatively impact the agricultural and construction equipment markets and affect our financial results.
Weather conditions, particularly severe floods and droughts, can have a significant adverse effect on regional agricultural and construction markets. Accordingly, our financial condition and results of operations may be adversely affected by adverse weather conditions.
Our rental operations subject us to risks including increased maintenance costs as our rental fleet ages, increased costs of new replacement equipment we use in our fleet, and losses upon disposition of rental fleet units.
Our rental fleet margins are materially impacted by utilization of fleet assets, which is seasonal and can fluctuate materially due to weather and economic factors. If our rental equipment ages, the costs of maintaining that equipment, if not replaced within a certain period of time, will likely increase. The cost of new equipment for use in our rental fleet could also increase due to increased material costs for our suppliers or other factors beyond our control. Furthermore, changes in customer demand could cause some of our existing equipment to become obsolete and require us to purchase new equipment at increased costs.
We include in operating income the difference between the sales price and the depreciated value of an item of rental equipment sold. The market value of any given piece of rental equipment could be less than its depreciated value at the time it is sold. The market value of used rental equipment depends on several factors, including:
market prices for like equipment;
hours and condition of the equipment;
time of year that the equipment is sold;
the supply of used equipment in the market; and
general economic conditions.
Any significant decline in the selling prices for used rental equipment, or increased costs resulting from our rental operations, could have a material adverse effect on our results of operation and cash flow.

14

Table of Contents

Our industry is highly competitive.
The agricultural and construction equipment distribution (including parts and service) and rental industries are highly competitive and fragmented, with large numbers of companies operating on a regional or local basis. Historically, our competitors have competed aggressively on the basis of pricing or inventory availability, resulting in decreased margins on our sales to the extent we choose to match our competitors' pricing. To the extent we choose not to match or remain within a reasonable competitive distance from our competitors' pricing, we may lose sales volume and market share. In addition, to the extent CNH Industrial's competitors (such as Deere, Caterpillar, Komatsu, Volvo, and AGCO) provide their dealers with more innovative or higher quality products, better customer financing, or have more effective marketing programs, our ability to compete and our results of operations could be adversely affected. In addition, e-commerce companies selling parts have negatively impacted dealers' parts sales and margins, and it is expected that this competitive pressure will only increase in the future.
If our acquisition plans are unsuccessful, we may not achieve our planned long-term revenue growth.
Our ability to grow through the acquisition of additional CNH Industrial geographic areas of responsibility and store locations or other businesses will be dependent upon the availability of suitable acquisition candidates at acceptable values, our ability to compete effectively for available acquisition candidates and the availability of capital to complete the acquisitions. We may not successfully identify suitable targets, or if we do, we may not be able to close the transactions, or if we close the transactions, they may not be profitable. In addition, CNH Industrial's consent is required for the acquisition of any CNH Industrial dealership, and the consent of our lenders may be required for certain acquisitions. CNH Industrial typically evaluates management and performance and capitalization of a prospective acquirer in determining whether to consent to the sale of a CNH Industrial dealership. There can be no assurance that CNH Industrial or our lenders will consent to any or all acquisitions of dealerships that we may propose.
Our acquisitions may not be successful.
There are risks associated with acquisitions of new dealerships. These risks include incurring significantly higher than anticipated capital expenditures and operating expenses; failing to assimilate the operations and personnel of the acquired dealerships; disrupting our ongoing business; diluting the effectiveness of our management; failing to maintain uniform standards, controls and policies; and impairing relationships with employees and customers as a result of changes in management. To the extent we do not successfully avoid or overcome the risks or problems related to acquisitions, our results of operations and financial condition could be adversely affected. Future acquisitions also may have a significant impact on our financial position and capital needs, and could cause substantial fluctuations in our quarterly and yearly results of operations. Acquisitions could include significant goodwill and intangible assets, which may result in future impairment charges that would reduce our stated earnings.
We are exposed to customer credit risks.
We extend credit to our customers for parts and service work, rental charges, and also for some equipment sales in our domestic and international operations. If we are unable to manage credit risk issues adequately, or if a large number of customers should have financial difficulties at the same time, our credit losses could increase above historical levels and our operating results would be adversely affected. Delinquencies and credit losses generally would be expected to increase if there was a worsening of economic conditions.
Our business success depends on attracting and retaining qualified personnel.
Our success in executing our operating and strategic plans depends on the efforts and abilities of our management team and key employees, including the managers of our field operations and our country managers in our International operations. The failure to attract and retain members of our management team and key employees will harm us.
Selling and renting agricultural and construction equipment, selling parts, and providing repair services subject us to liability risks that could adversely affect our financial condition and reputation.
Products sold, rented or serviced by us may expose us to potential liabilities for personal injury or property damage claims that arise from the use of such products. Our commercial liability insurance may not be adequate to cover significant product liability claims, or we may not be able to secure such insurance on economically reasonable terms. An uninsured or partially insured claim for which indemnification from the manufacturer is not available could have a material adverse effect on our financial condition. Furthermore, if any significant claims are made against us or against CNH Industrial or any of our other suppliers, our business may be adversely affected by any related negative publicity.

15

Table of Contents

Security breaches and other disruptions could compromise our information and expose us to liability, which would cause our business and reputation to suffer.
We use information technology systems to record, process and summarize financial information and results of operations for internal reporting purposes and to comply with regulatory financial reporting, legal and tax requirements. Additionally, in the ordinary course of our business, we collect and store sensitive data, including proprietary business information, of our customers and suppliers, as well as personally identifiable information of our customers and employees, in our data centers and on our networks. The secure operation of these information technology networks and the processing and maintenance of this information is critical to our operations. Despite our security measures and business continuity plans, our information technology and infrastructure may be vulnerable to damage, disruptions or shutdowns due to attacks by hackers or breaches due to employee error or malfeasance or other disruptions arising from power outages, telecommunication failures, terrorist acts, natural disasters, or other catastrophic events. The occurrence of these events could compromise our networks, and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability or regulatory penalties under laws that protect the privacy of personal information, disrupt our operations, and damage our reputation, which could adversely affect our business, results of operations, and financial condition. In addition, as security threats continue to evolve and increase in frequency and sophistication, we may need to invest additional resources to protect the security of our systems.
We maintain cyber risk insurance, but this insurance may not be sufficient to cover all of our losses from any future breaches of our systems.
ITEM 1B.    UNRESOLVED STAFF COMMENTS
None.
ITEM 2.    PROPERTIES
Equipment Stores
As of January 31, 2019, we operate 104 agricultural and construction equipment stores in the United States and Europe in the following locations.
 
Agriculture Segment
 
Construction Segment
 
International Segment
 
Total
US States
 
 
 
 
 
 
 
North Dakota
9

 
5

 

 
14

Minnesota
10

 
3

 

 
13

Iowa
10

 
3

 

 
13

Nebraska
11

 
2

 

 
13

South Dakota
8

 
2

 

 
10

Colorado

 
3

 

 
3

Montana

 
3

 

 
3

Arizona

 
2

 

 
2

New Mexico

 
1

 

 
1

Wisconsin

 
1

 

 
1

Wyoming

 
1

 

 
1

European Countries
 
 
 
 
 
 
 
Bulgaria

 

 
7

 
7

Germany

 

 
4

 
4

Romania

 

 
10

 
10

Ukraine

 

 
8

 
8

Serbia

 

 
1

 
1

Total
48

 
26

 
30

 
104


16

Table of Contents

Store Lease Arrangements
As of January 31, 2019, we leased 120 facilities with lease arrangements expiring at various dates through January 2031. Many of our lease agreements include fair market value purchase options, rights of first refusal, lease term extension options, or month-to-month or year-to-year automatic renewal provisions at the conclusion of the original lease period. A majority of the leases provide for fixed monthly rental payments and require us to pay the real estate taxes on the properties for the lease periods. We are generally responsible for utilities and maintenance of the leased premises. All of the leases require that we maintain public liability and personal property insurance on each of the leased premises, and a majority of the leases require us to indemnify the lessor in connection with any claims arising from the leased premises during our occupation of the property. We believe our facilities are adequate to meet our current and anticipated needs.
As part of our due diligence review prior to a dealership acquisition, we evaluate the adequacy, suitability and condition of the related real estate. Our evaluation typically includes a Phase I environmental study, and if deemed necessary, a Phase II environmental study, of the real property to determine whether there are any environmental concerns. If any environmental concerns exist, we generally require that such concerns be addressed prior to acquisition of the dealership.
We have not historically owned significant amounts of real estate, although we evaluate opportunities to invest in our real estate on a case by case basis.
Headquarters
We currently lease and occupy approximately 48,000 square feet in West Fargo, North Dakota for our headquarters, this lease expires on January 31, 2028. We continually review our location needs, including the adequacy of our headquarters space, to ensure our space is sufficient to support our operations. We believe there is ample opportunity for expansion in our West Fargo headquarters facility if necessary.
ITEM 3.    LEGAL PROCEEDINGS
We are, from time to time, subject to claims and suits arising in the ordinary course of business. Such claims have, in the past, generally been covered by insurance. Management believes the resolution of other legal matters will not have a material effect on our financial condition, results of operation or cash flow, although the ultimate outcome of any such actions is not assured. Furthermore, our insurance may not be adequate to cover all liabilities that may arise out of claims brought against us.
ITEM 4.    MINE SAFETY DISCLOSURES
Not applicable.

17

Table of Contents


EXECUTIVE OFFICERS OF THE REGISTRANT
The names, ages and positions of our executive officers are as follows:
Name
 
Age
 
Position
David Meyer
 
65
 
Board Chair and Chief Executive Officer
Mark Kalvoda
 
47
 
Chief Financial Officer and Treasurer
Bryan Knutson
 
40
 
Chief Operating Officer
David Meyer is our Board Chair and Chief Executive Officer. Mr. Meyer worked for JI Case Company in 1975. From 1976 to 1980, Mr. Meyer was a partner in a Case/New Holland Dealership with locations in Lisbon, North Dakota and Wahpeton, North Dakota. In 1980, Mr. Meyer, along with a partner, founded Titan Machinery Inc. Mr. Meyer has served on both the Case CE and CaseIH Agriculture Dealer Advisory Boards. Mr. Meyer is the past chairman and current board member of the North Dakota Implement Dealers Association, and currently serves as a Trustee on the University of Minnesota Foundation.
Mark Kalvoda became our Chief Financial Officer in April 2011 and previously served as our Chief Accounting Officer since September 2007. Prior to joining us, he held various positions between 2004 and 2007 at American Crystal Sugar Co., including Corporate Controller, Assistant Secretary and Assistant Treasurer. Prior to working for American Crystal Sugar Co., he served in various financial positions within Hormel Foods Corporation.
Bryan Knutson became our Chief Operating Officer in August 2017 and previously served as our Vice President, Ag Operations since 2016. Mr. Knutson joined the company in 2002 where he began his career in equipment sales later advancing to store manager, complex manager and region manager prior to his current role.

18

Table of Contents

PART II
ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our common stock is listed for trading on the NASDAQ Stock Market and trades under the symbol "TITN". As of March 29, 2019, there were approximately 680 record holders of our common stock, which excludes holders whose stock is held either in nominee name or street name brokerage accounts.
DIVIDENDS
We have not historically paid any dividends on our common stock and do not expect to pay cash dividends on our common stock in the foreseeable future. Payment of future cash dividends, if any, will be at the discretion of our board of directors after taking into account various factors, including our financial condition, operating results, current and anticipated cash needs, outstanding indebtedness and plans for expansion and restrictions imposed by lenders, if any.
UNREGISTERED SALES OF EQUITY SECURITIES
We did not have any unregistered sales of equity securities during the fiscal quarter ended January 31, 2019.
SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS
For information on securities authorized for issuance under our equity compensation plans, refer to Item 12, "Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters."
REPURCHASES
We did not engage in any repurchases of our common stock during the fiscal quarter ended January 31, 2019.
STOCK PERFORMANCE GRAPH
The following graph compares the cumulative total return for the last trading day of our last five fiscal years on a $100 investment (assuming dividend reinvestment) on January 31, 2014, the last trading day before our fifth preceding fiscal year, in each of our common stock, the Russell 2000 Stock Index and the S&P Retailing Group Index.
chart-9e40b204bbbd5d9783d.jpg

19

Table of Contents

 
January 31,
 
2014
 
2015
 
2016
 
2017
 
2018
 
2019
Titan Machinery Inc.
$
100.00

 
$
86.69

 
$
52.09

 
$
84.72

 
$
131.84

 
$
114.97

Russell 2000 Index
100.00

 
103.05

 
91.56

 
120.42

 
139.27

 
132.95

S&P 500 Retail Index
100.00

 
118.75

 
137.22

 
160.31

 
230.59

 
241.71

ITEM 6.    SELECTED FINANCIAL DATA
The data given below, excluding the store count data, as of and for each of the five years in the period ended January 31, 2019, has been derived from our audited consolidated financial statements. In order to understand the effect of accounting policies and material uncertainties that could affect our presentation of financial information, this data should be read in conjunction with our Consolidated Financial Statements and Notes thereto included under Item 8 to this Form 10-K and in conjunction with Management's Discussion and Analysis of Financial Condition and Results of Operation included under Item 7 of this Form 10-K.
All revenue and cost of revenue amounts for each of the fiscal years ended January 31, 2018, 2017, 2016 and 2015 are presented on an as corrected basis after correcting for an immaterial error identified in our previously issued financial statements. The correction of this immaterial error reduced total revenue and cost of revenue by less than 1.5% for each annual period and impacted the amounts of previously reported equipment, parts, service and rental and other revenue and cost of revenue, but had no impact on total gross profit, operating or net income, or earnings per-share. See Note 26 to our consolidated financial statements included in this Form 10-K for additional information.
The change in store count, resulting from acquisitions, new store openings, or store closings, has an impact on the comparability of our statement of operations and balance sheet information. The table below summarizes the net change in our store count and ending store count for each fiscal year presented.
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
2016
 
2015
Store Count Data
 
 
 
 
 
 
 
 
 
Net change in store count during fiscal year
7

 
(12
)
 
1

 
(4
)
 
(7
)
Store count at end of fiscal year
104

 
97

 
109

 
108

 
112


20

Table of Contents

 
Year Ended January 31,
 
2019
 
2018
 
2017
 
2016
 
2015
 
 (in thousands, except per share data)
Statement of Operations Data:
 
 
 
 
 
 
 
 
 
Revenue
 
 
 
 
 
 
 
 
 
Equipment
$
909,178

 
$
844,768

 
$
838,037

 
$
972,496

 
$
1,462,956

Parts
210,796

 
203,231

 
214,103

 
222,982

 
241,636

Service
86,840

 
88,794

 
94,408

 
94,216

 
99,175

Rental and other
54,691

 
55,813

 
55,149

 
66,098

 
78,663

Total Revenue
1,261,505

 
1,192,606

 
1,201,697

 
1,355,792

 
1,882,430

Cost of Revenue
 
 
 
 
 
 
 
 
 
Equipment
812,467

 
764,649

 
769,924

 
917,779

 
1,323,691

Parts
149,615

 
143,729

 
149,212

 
156,563

 
170,121

Service
29,036

 
30,679

 
31,490

 
30,121

 
29,071

Rental and other
38,799

 
38,249

 
37,342

 
45,415

 
51,163

Total Cost of Revenue
1,029,917

 
977,306

 
987,968

 
1,149,878

 
1,574,046

Gross Profit
231,588

 
215,300

 
213,729

 
205,914

 
308,384

Operating Expenses
201,537

 
203,203

 
211,372

 
220,524

 
273,271

Impairment and Restructuring Costs
2,570

 
11,172

 
4,729

 
8,500

 
34,390

Income (Loss) from Operations
27,481

 
925

 
(2,372
)
 
(23,110
)
 
723

Other Income (Expense)
 
 
 
 
 
 
 
 
 
Interest income and other income (expense)
2,547

 
1,635

 
1,524

 
(478
)
 
(4,272
)
Interest expense
(13,874
)
 
(16,999
)
 
(21,865
)
 
(32,623
)
 
(34,791
)
Income (Loss) Before Income Taxes
16,154

 
(14,439
)
 
(22,713
)
 
(56,211
)
 
(38,340
)
Provision for (Benefit from) Income Taxes
3,972

 
(7,390
)
 
(8,178
)
 
(17,982
)
 
(4,923
)
Net Income (Loss) Including Noncontrolling Interest
12,182

 
(7,049
)
 
(14,535
)
 
(38,229
)
 
(33,417
)
Less: Loss Attributable to Noncontrolling Interest

 

 
(356
)
 
(337
)
 
(1,260
)
Net Income (Loss) Attributable to Titan Machinery Inc.
12,182

 
(7,049
)
 
(14,179
)
 
(37,892
)
 
(32,157
)
 
 
 
 
 
 
 
 
 
 
Earnings (Loss) per Share:
 
 
 
 
 
 
 
 
 
Basic
$
0.55

 
$
(0.32
)
 
$
(0.65
)
 
$
(1.76
)
 
$
(1.51
)
Diluted
$
0.55

 
$
(0.32
)
 
$
(0.65
)
 
$
(1.76
)
 
$
(1.51
)
 
 
 
 
 
 
 
 
 
 
Weighted Average Shares Outstanding:
 
 
 
 
 
 
 
 
 
Basic
21,809

 
21,543

 
21,294

 
21,111

 
20,989

Diluted
21,816

 
21,543

 
21,294

 
21,111

 
20,989




21

Table of Contents

 
January 31,
 
2019
 
2018
 
2017
 
2016
 
2015
 
 (in thousands)
Balance Sheet Data:
 
 
 
 
 
 
 
 
 
Cash
$
56,745

 
$
53,396

 
$
53,151

 
$
89,465

 
$
127,528

Receivables, net
77,500

 
60,672

 
60,082

 
65,534

 
84,921

Inventories
491,091

 
472,467

 
478,266

 
680,482

 
870,901

Prepaid expenses and other
15,556

 
12,440

 
10,989

 
9,753

 
10,634

Income taxes receivable

 
171

 
5,380

 
13,011

 
166

Assets held for sale

 

 

 

 
15,312

Total current assets
640,892

 
599,146

 
607,868

 
858,245

 
1,109,462

Goodwill and intangibles, net
8,408

 
5,193

 
5,001

 
5,134

 
5,458

Property and equipment, net of accumulated depreciation
138,950

 
151,047

 
156,647

 
183,179

 
208,680

Deferred income taxes
3,010

 
3,472

 
547

 

 

Other assets
1,178

 
1,450

 
1,359

 
1,317

 
2,014

Total Assets
$
792,438

 
$
760,308

 
$
771,422

 
$
1,047,875

 
$
1,325,614

 
 
 
 
 
 
 
 
 
 
Accounts payable
$
16,607

 
$
15,136

 
$
17,326

 
$
16,863

 
$
17,659

Floorplan payable (1)
273,756

 
247,392

 
233,228

 
444,780

 
625,162

Senior convertible notes
45,249

 

 

 

 

Current maturities of long-term debt
3,340

 
1,574

 
1,373

 
1,557

 
7,749

Deferred revenue
46,409

 
32,324

 
26,366

 
31,159

 
35,090

Accrued expenses and other
35,091

 
31,863

 
30,533

 
29,066

 
39,025

Liabilities held for sale

 

 

 

 
2,835

Total current liabilities
420,452

 
328,289

 
308,826

 
523,425

 
727,520

Senior convertible notes

 
62,819

 
88,501

 
134,145

 
129,889

Long-term debt, less current maturities
25,812

 
34,578

 
38,236

 
38,409

 
66,563

Deferred income taxes
4,955

 
2,275

 
9,500

 
11,135

 
19,971

Other long-term liabilities
5,908

 
10,492

 
5,180

 
2,412

 
3,312

Total stockholders' equity
335,311

 
321,855

 
321,179

 
338,349

 
378,359

Total Liabilities and Stockholders' Equity
$
792,438

 
$
760,308

 
$
771,422

 
$
1,047,875

 
$
1,325,614

 
 
 
 
 
 
 
 
 
 
(1) Portion of floorplan payable balance which is interest-bearing as of January 31
45
%
 
47
%
 
72
%
 
75
%
 
75
%


22

Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
You should read the following discussion and analysis of our financial condition and results of operations together with our financial statements and the related notes appearing under Item 8 of this 10-K. Some of the information contained in this discussion and analysis or set forth elsewhere in this annual report, including information with respect to our plans and strategy for our business and expected financial results, includes forward-looking statements that involve risks and uncertainties. You should review the "Information Regarding Forward-Looking Statement" in this Item 7 and "Risk Factors" presented under Item 1A for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis in this annual report.
BUSINESS DESCRIPTION
We own and operate a network of full service agricultural and construction equipment stores in the United States and Europe. Based upon information provided to us by CNH Industrial N.V. or its U.S. subsidiary CNH Industrial America, LLC, collectively referred to in this annual report as CNH Industrial, we are the largest retail dealer of Case IH Agriculture equipment in the world, the largest retail dealer of Case Construction equipment in North America and a major retail dealer of New Holland Agriculture and New Holland Construction equipment in the U.S. We operate our business through three reportable segments, Agriculture, Construction and International. Within each segment, we have four principal sources of revenue: new and used equipment sales, parts sales, service, and equipment rental and other activities.
The agricultural equipment we sell and service includes machinery and attachments for uses ranging from large-scale farming to home and garden use. The construction equipment we sell and service includes heavy construction machinery, light industrial machinery for commercial and residential construction, road and highway construction machinery, mining, energy, and forestry operations equipment. We offer our customers a one-stop solution for their equipment needs through:
new and used equipment sales;
parts sales;
equipment repair and maintenance services; and
equipment rental and other activities.
The new equipment and parts we sell are supplied primarily by CNH Industrial. According to public reports filed by CNH Industrial, CNH Industrial is a leading manufacturer and supplier of agricultural and construction equipment based on the number of units sold, primarily through the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. Sales of new CNH Industrial products accounted for approximately 72% of our new equipment revenue in fiscal 2019, with our single largest manufacturer other than CNH Industrial representing approximately 3% of our total new equipment sales. We acquire used equipment for resale primarily through trade-ins from our customers and in some cases through selective purchases. We sell parts and provide in-store and on-site repair and maintenance services. We rent equipment and provide other ancillary services such as equipment transportation, GPS signal subscriptions, farm data management systems, precision farming equipment, and finance and insurance products.
Throughout our 38-year operating history we have built an extensive, geographically contiguous network of 74 stores located in the United States and 30 stores in Europe. We have a history of growth through acquisitions, including over 50 acquisitions in 11 states and four European countries since January 1, 2003. We believe that there will continue to be opportunities for dealership consolidation in the future, and we expect that acquisitions will continue to be a component of our long-term growth strategy.
Certain External Factors Affecting our Business
We are subject to a number of factors that affect our business including those factors discussed in the sections in this annual report entitled "Risk Factors" and "Information Regarding Forward-Looking Statements." Certain of these external factors include, but are not limited to, the following:
Macroeconomic and Industry Factors
Our Agriculture and International businesses are primarily driven by the demand for agricultural equipment for use in the production of food, fiber, feed grain and renewable energy; home and garden applications; and the maintenance of commercial, residential and government properties. Agriculture industry factors such as changes in agricultural commodity prices and net farm income, have an effect on customer sentiment and our customers' ability to secure financing for their

23

Table of Contents

equipment purchases. Macroeconomic and industry factors that affect commodity prices and net farm income include changing worldwide demand for agriculture commodities, crop yields and supply disruptions caused by weather patterns and crop diseases, crop stock levels, production costs, and changing U.S. dollar foreign currency exchange rates. Based on U.S. Department of Agriculture ("USDA") publications, the most recent estimate of net farm income for calendar year 2018 decreased 16% compared to calendar year 2017 and is approximately 15% below the average for the five-year period ending December 31, 2018. Lower net farm income over the most recent five-year period has led to reduced demand for equipment purchases, service work and parts, negatively impacting same-store sales, equipment revenue and equipment gross profit margin, and has caused an oversupply of equipment inventory in our geographic footprint. In addition, these agriculture industry conditions have also led to a reduction of purchases of construction equipment by customers in the agriculture industry, negatively impacting certain of our Construction stores. Based on its March 2019 report, the USDA projected net farm income for calendar year 2019 to increase 10.0% as compared to calendar year 2018.
During economic downturns, and especially in the agriculture industry, equipment revenue generally decreases but parts and service revenue tend to be more stable as the amount of land in production remains unchanged and because farmers may use existing equipment rather than purchasing new equipment. Our gross profit margins on equipment are lower than gross profits on parts and service. As a result, this change in mix may cause our gross profit margin to increase on a percentage basis even though our overall gross profit dollars may decrease. Our operating expenses are largely fixed expenses, other than commissions paid to our equipment sales consultants which generally fluctuate with gross profit. When equipment revenue decreases, it may have a negative impact on our ability to leverage these fixed costs, and, as a result, may reduce our operating income.
Seasonality & Weather
The agricultural and construction equipment businesses are highly seasonal, which causes our quarterly results and our available cash flow to fluctuate during the year. Our customers generally purchase and rent equipment in preparation for, or in conjunction with, their busy seasons, which for farmers are the spring planting and fall harvesting seasons, and which for Construction customers is typically the second and third quarters of our fiscal year for much of our Construction footprint. Our parts and service revenues are typically highest during our customers' busy seasons as well, due to the increased use of their equipment during this time, which generates the need for more parts and service work. However, weather conditions impact the timing of our customers' busy times, which may cause greater than expected fluctuations in our quarterly financial results year over year. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of funds from completed harvests and construction projects.
Seasonal weather trends, particularly severe wet or dry conditions, can have a significant impact on regional agricultural and construction market performance by affecting crop production and the ability to undertake construction projects. Weather conditions that adversely affect the agricultural or construction markets decrease the demand for our products and services.
In addition, numerous external factors such as credit markets, commodity prices, and other circumstances may disrupt normal purchasing practices and buyer sentiment, further contributing to the seasonal fluctuations.
Dependence on our Primary Supplier
The majority of our business involves the distribution and servicing of equipment manufactured by CNH Industrial. In fiscal 2019, CNH Industrial supplied approximately 74% of the new equipment sold in our Agriculture segment, 70% of the new equipment sold in our Construction segment, and 72% of the new equipment sold in our International segment, and represented a significant portion of our parts revenue. Thus, we believe the following factors have a significant impact on our operating results:
CNH Industrial’s product offerings, reputation and market share;
CNH Industrial’s product prices and incentive and discount programs;
CNH Industrial's supply of inventory;
CNH Industrial's offering of floorplan payable financing for the purchase of a substantial portion of our inventory; and
CNH Industrial's offering of financing and leasing used by our customers to purchase CNH Industrial equipment from us.

24

Table of Contents

Credit Market Changes
Changes in credit markets can affect our customers' ability and willingness to make capital expenditures, including purchasing our equipment. Tight credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets have the potential to adversely affect our business. Such disruptions in the overall economy and financial markets and the related reduction in consumer confidence in the economy, slow activity in the capital markets, negatively affect access to credit on commercially acceptable terms, and may adversely impact our customers' access to credit and the terms of any such credit. However, if retail interest rates remain low, our business may be positively affected by customers who find financing purchases of our equipment more attractive due to lower borrowing costs.
Our business is also particularly dependent on our access to credit markets to manage inventory and finance acquisitions. We cannot predict what future changes will occur in credit markets or how these changes will impact our business.
Inflation
Inflation has not had a material impact on our operating results and we do not expect it to have a material impact in the future. To date, in those instances in which we have experienced cost increases, we have been able to increase selling prices to offset such increases.
Significant Items Impacting Our Financial Position and Results of Operations
Restructuring Plans
We monitor our footprint, overall employee workforce and organizational structure to identify ways to improve our efficiency, effectiveness and enhance the competitiveness of our business. Depending on market conditions, we may implement restructuring plans that include the closing of stores or the reduction of our employee workforce. These restructuring plans include costs associated with employee termination benefits, lease termination costs and asset impairment and disposals.
    In February 2017, to better align our cost structure and business in certain markets, we announced a dealership restructuring plan (the "Fiscal 2018 Restructuring Plan"), which included the closing of one Construction location and 14 Agriculture locations. As of January 31, 2018, we had closed and fully exited all of these locations and had completed our Fiscal 2018 Restructuring Plan. For the fiscal year ended January 31, 2019, we recognized a restructuring expense of $0.4 million as the result of revised assumptions regarding the timing and amount of estimated future cash flows associated with our cease-use liabilities for certain of our closed store locations. In fiscal 2016, we carried out a restructuring plan which began in fiscal 2015 that reduced our headcount and resulted in the closing of four Agriculture stores and eight Construction stores. We incurred costs of $0.4 million, $10.5 million and $3.3 million during the fiscal years ended January 31, 2019, 2018 and 2017, related to these activities.
AGRAM Acquisition
On July 2, 2018, we continued our strategy of acquiring dealerships in desired market areas with our acquisition of two commonly-controlled companies, AGRAM Landtechnikvertrieb GmbH and AGRAM Landtechnik Rollwitz GmbH (collectively "AGRAM"). AGRAM consists of four Case IH agriculture dealership locations in the following cities of Germany; Altranft, Burkau, Gutzkow, and Rollowitz. Total cash consideration paid in the acquisition was $19.2 million, which we financed through available cash resources and capacity under our existing floorplan payable and other credit facilities. The four AGRAM dealerships are included within our International segment.
Inventory Impairment Charges
In the fourth quarter of fiscal 2016 we expanded our marketing of certain aged equipment inventory through alternative channels rather than our normal retail channels. We recorded an inventory impairment charge of $27.5 million to equipment cost of revenue in the fourth quarter of fiscal 2016 related to the expanded equipment inventory reduction plan, of which $11.4 million related to our Agriculture segment, $15.9 million related to our Construction segment and $0.2 million related to our International segment. During the course of fiscal 2017, we substantially completed this expanded inventory reduction plan.
Critical Accounting Policies and Use of Estimates
In the preparation of financial statements prepared in conformity with U.S. generally accepted accounting principles ("GAAP"), we are required to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and the related disclosures. While we believe the estimates and judgments we use in preparing our financial statements are appropriate, they are subject to future events and uncertainties regarding their outcome and therefore actual

25

Table of Contents

results may materially differ from these estimates. We describe in Note 1, Business Activity and Significant Accounting Polices, of the Notes to our Consolidated Financial Statements the significant accounting policies used in preparing the consolidated financial statements. We consider the following items in our consolidated financial statements to require significant estimation or judgment.
Revenue Recognition
Equipment revenue transactions include the sale of agricultural and construction equipment and often include both cash and noncash consideration received from our customers, with noncash consideration in the form of used, trade-in, equipment assets. The amount of revenue recognized in the sale transaction is dependent on the value assigned to the trade-in asset. Significant judgment is required to estimate the value of trade-in assets. We assign value based on the estimated selling price for that piece of equipment in the applicable market, less a gross profit amount to be realized at the time the trade-in asset is sold and an estimate of any reconditioning work required to ready the asset for sale. We estimate future selling prices of trade-in assets using various external industry data and relevant internal information, and consider the impact of various factors including model year, hours, overall condition, and other equipment specifications. Our estimates of the value of trade-in assets are impacted by changing market values of used equipment and the availability of relevant and reliable third-party data. In instances in which relevant third-party information is not available, the value assigned to trade-in equipment is dependent on internal judgments.
Inventories
New and used equipment inventories are stated at the lower of cost (specific identification) or net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The majority of our used equipment inventory is acquired through trade-ins from our customers and is initially measured and recognized based on the estimated future selling price of the equipment, less a gross profit amount to be realized when the trade-in asset is sold and an estimate of any reconditioning work required to ready the asset for sale. Subsequent to the initial recognition, all new and used equipment inventories are subject to periodic lower of cost or net realizable value assessments. We estimate net realizable value using internal and third-party data that considers various factors including aging of equipment, hours of use and market conditions. Generally, used equipment prices are more volatile to changes in market conditions than prices for new equipment due to incentive programs that may be offered by manufacturers to assist in the sale of new equipment. We review our equipment inventory values on a monthly basis and adjust them whenever the carrying amount exceeds the estimated net realizable value.
Parts inventories are valued at the lower of average cost or net realizable value. We estimate net realizable value of our parts inventories based on various factors including aging and sales history of each type of parts inventory.
Impairment of Long-Lived Assets
Our long-lived assets consist of our intangible assets and property and equipment. We review these assets for potential impairment whenever events or circumstances indicate that the carrying value may not be recoverable. Recoverability is measured by comparing the estimated future undiscounted cash flows of such assets to their carrying values. If the estimated undiscounted cash flows exceed the carrying value, the carrying value is considered recoverable and no impairment recognition is required. However, if the sum of the undiscounted cash flows is less than the carrying value of the asset, the second step of the impairment analysis must be performed to measure the amount of the impairment, if any. The second step of the impairment analysis compares the estimated fair value of the long-lived asset to its carrying value and any amount by which the carrying value exceeds the fair value is recognized as an impairment charge.
When reviewing long-lived assets for impairment, we group long-lived assets with other assets and liabilities at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities. Long-lived assets deployed and used by individual store locations are reviewed for impairment at the individual store level. Other long-lived assets shared across stores within a segment or shared across segments are reviewed for impairment on a segment or consolidated level as appropriate.
During our 2019 fiscal year we determined that events or circumstances were present that may indicate that the carrying amount of certain of our store long-lived assets might not be recoverable. The events or circumstances which indicated that certain of our store long-lived assets might not be recoverable included a current period operating loss combined with historical losses and anticipated future operating losses within certain of our stores, or an expectation that a long-lived asset (or asset group) will be disposed of before the end of its previously estimated useful life. In light of these circumstances, we performed step one of the impairment analysis for these assets, which have a combined carrying value of $9.9 million, to determine if the asset values are recoverable. In certain cases the analysis indicated that the carrying value is not recoverable. The aggregate carrying value of such assets totaled $4.8 million. Based on this conclusion, we performed step two of the impairment analysis and estimated the fair value of these assets using an income approach that incorporated unobservable

26

Table of Contents

inputs including estimated forecasted net cash flows generated from the use and disposition of these assets. Step two of the analysis indicated that an impairment charge in the amount of $2.2 million was necessary, of which $0.9 million related to the Agriculture segment, $1.1 million related to the Construction segment, and $0.2 million related to the International segment. In all other cases, in which the aggregate carrying value of such assets totaled $5.1 million, our analyses indicated that the carrying values are recoverable based on our estimates of future undiscounted cash flows under step one of the impairment analysis.
Our impairment analyses require significant judgment, including identification of the grouping of long-lived and other assets and liabilities for impairment testing, estimates of future cash flows arising from these groups of assets and liabilities, and estimates of the remaining useful lives of the long-lived assets being evaluated. Our estimates inherently include a degree of uncertainty and are impacted by macroeconomic and industry conditions, the competitive environment and other factors. Adverse changes in any of these factors in future periods could result in impairment charges in future periods which could materially impact our results of operations and financial position.
Income Taxes
In determining our provision for (benefit from) income taxes, we must make certain judgments and estimates, including an assessment of the realizability of our deferred tax assets. In evaluating our ability to realize the benefit of our deferred tax assets we consider all available positive and negative evidence, including our historical operating results and our expectation of future taxable income, the availability to implement prudent tax-planning strategies, and the carryforward periods over which the assets may be realized. These assumptions require significant judgment and estimation.
In reviewing our deferred tax assets as of January 31, 2019, we concluded that a partial valuation allowance for U.S. federal and state deferred tax assets of $4.4 million was warranted. This conclusion was principally based on the presence of historical losses and our expected future sources of taxable income, including the anticipated future reversal of our existing deferred tax assets and liabilities. We review our foreign deferred tax assets, including net operating losses, on a jurisdiction-by-jurisdiction basis. As of January 31, 2019, we concluded that a valuation allowance for certain of our foreign deferred tax assets, including net operating losses, was warranted in the amount of $2.3 million. This conclusion was principally based on the presence of historical losses and the anticipated time period over which we may generate taxable income in excess of these historical losses.
During the fiscal year ended January 31, 2018, the Company concluded, based upon all available evidence, it was more likely than not it would have sufficient future taxable income to realize the deferred tax assets of its Ukrainian subsidiary. As a result, the Company released the $3.5 million valuation allowance and recognized a corresponding benefit from income taxes in the consolidated statement of operations for the fiscal year ended January 31, 2018. The Company's conclusion regarding the realizability of such deferred tax assets was based on recent profitable operations in Ukraine resulting in a cumulative profit over the three-year period ending January 31, 2018, our projections of future profitability in Ukraine, the relative economic and political stability in Ukraine and the unlimited carryforward period of net operating losses in Ukraine.
The initial recognition of, and any changes in, a deferred tax asset valuation allowance are recorded to the provision for income taxes and impacts our effective tax rate. Our assessment of the need for and magnitude of valuation allowances for our deferred tax assets may be impacted by changes in tax laws, our assumptions regarding the ability to generate future taxable income and the availability of tax-planning strategies. Changes in any of these factors could lead to a change in the recognized valuation allowance which may impact our future results of operations and financial position.
New Accounting Pronouncements    
Refer to Note 1, Business Activity and Significant Accounting Polices, of the Notes to our Consolidated Financial Statements for a description of new accounting pronouncements recently adopted or not yet adopted and the impact or anticipated impact of such pronouncements to our consolidated financial statements.
Key Financial Metrics
In addition to tracking our sales and expenses to evaluate our operational performance, we also monitor the following key financial metrics. The results of some of these metrics are discussed further throughout the Management's Discussion and Analysis of Financial Condition and Results of Operations section of this Form 10-K.
Inventory Turnover
Inventory turnover measures the rate at which inventory is sold during the year. We calculate it by dividing cost of sales on equipment and parts for the last twelve months by the average of the month-end balances of our equipment and parts

27

Table of Contents

inventories for the same twelve-month period. We believe that inventory turnover is an important management metric in evaluating the efficiency at which we are managing and selling our inventories.
Same-Store Results
Same-store results for any period represent results of operations by stores that were part of our company for the entire comparable period in the preceding fiscal year. We do not distinguish relocated or newly-expanded stores in this same-store analysis. Closed stores are excluded from the same-store analysis.
Absorption
Absorption is an industry term that refers to the percentage of an equipment dealer's operating expense covered by the combined gross profit from parts, service and rental fleet activity. We calculate absorption by dividing our gross profit from sales of parts, service and rental fleet by our operating expenses, less commission expense on equipment sales, plus interest expense on floorplan payables and rental fleet debt. We believe that absorption is an important management metric because during economic down cycles our customers tend to postpone new and used equipment purchases while continuing to run, maintain and repair their existing equipment. Thus, operating at a high absorption rate enables us to operate profitably throughout economic down cycles.
Dollar Utilization
Dollar utilization is a measurement of asset performance and profitability used in the rental industry. We calculate the dollar utilization of our rental fleet equipment by dividing the rental revenue earned on our rental fleet by the average gross carrying value of our rental fleet (comprised of original equipment costs plus additional capitalized costs) for that period. While our rental fleet has variable expenses related to repairs and maintenance, its primary expense for depreciation is fixed. Low utilization of our rental fleet has a negative impact on gross profit margin and gross profit dollars due to the fixed depreciation component. However, high utilization of our rental fleet has a positive impact on gross profit margin and gross profit dollars.
Adjusted EBITDA
EBITDA is a non-GAAP financial measure defined as earnings before finance costs, income taxes, depreciation and amortization and is a metric frequently used to assess and evaluate financial performance. Management uses Adjusted EBITDA as a measure of financial performance, as a supplemental measure to evaluate the Company's overall operating performance and believes it provides a useful metric for comparability between periods and across entities within our industry by excluding differences in capital structure, income taxes, non-cash charges and certain activities that occur outside of the ordinary course of our business. We calculate Adjusted EBITDA as our net income (loss) including noncontrolling interest, adjusted for net interest (excluding floorplan interest expense), income taxes, depreciation, amortization, and items included in our non-GAAP reconciliation, for each of the respective periods. Adjusted EBITDA should be evaluated in addition to, and not considered a substitute for, or superior to, any GAAP measure of net income (loss). In addition, other companies may calculate Adjusted EBITDA in a different manner, which may hinder comparability with other companies. The Company's Adjusted EBITDA for the fiscal years ended January 31, 2019, 2018 and 2017 was $49.8 million, $30.8 million, and $11.7 million. Refer to the Non-GAAP Financial Measures section for a reconciliation of Adjusted EBITDA to net income (loss) including noncontrolling interest.
Key Financial Statement Components
Revenue
Equipment: We derive equipment revenue from the sale of new and used agricultural and construction equipment.
Parts: We derive parts revenue from the sale of parts for brands of equipment that we sell, other makes of equipment, and other types of equipment and related components. Our parts sales provide us with a relatively stable revenue stream that is less sensitive to the economic cycles that affect our equipment sales.
Service: We derive services revenue from repair and maintenance services to our customers' equipment. Our repair and maintenance services provide a high-margin, relatively stable source of revenue through changing economic cycles.
Rental and other: We derive other revenue from equipment rentals and ancillary equipment support activities such as equipment transportation, GPS signal subscriptions and reselling finance and insurance products.

28

Table of Contents

Cost of Revenue
Equipment: Cost of equipment revenue is the lower of the acquired cost or the market value of the specific piece of equipment sold.
Parts: Cost of parts revenue is the lower of the acquired cost or the market value of the parts sold, based on average costing.
Service: Cost of service revenue represents costs attributable to services provided for the maintenance and repair of customer-owned equipment and equipment then on-rent by customers.
Rental and other: Costs of other revenue represent costs associated with equipment rental, such as depreciation, maintenance and repairs, as well as costs associated providing transportation, hauling, parts freight, GPS subscriptions and damage waivers, including, among other items, drivers' wages, fuel costs, shipping costs and our costs related to damage waiver policies.
Operating Expenses
Our operating expenses include sales and marketing expenses, sales commissions (which generally are based upon equipment gross profit margins), payroll and related benefit costs, insurance expenses, professional fees, property rental and related costs, property and other taxes, administrative overhead, and depreciation associated with property and equipment (other than rental equipment).
Floorplan Interest
The cost of financing inventory is an important factor affecting our results of operations. Floorplan payable financing from CNH Industrial Capital, Wells Fargo, DLL Finance and various credit facilities related to our foreign subsidiaries represent the primary sources of financing for equipment inventories. CNH Industrial regularly offers interest-free periods as well as additional incentives and special offers. As of January 31, 2019, 55.4% of our floorplan payable financing was non-interest bearing.
Other Interest Expense
Interest expense represents the interest on our outstanding debt instruments, including our Senior Convertible Notes, other than floorplan payable financing facilities. Non-cash interest expense from amortization of the debt discount associated with our Senior Convertible Notes is also included in this balance.

29

Table of Contents

Results of Operations
Comparative financial data for each of our four sources of revenue for fiscal 2019, 2018, and 2017 are expressed below. The results of these periods include the operating results of the acquisitions made during these periods. The year-to-year comparisons included below are not necessarily indicative of future results. Information regarding segment revenue and income (loss) before income taxes is presented for each fiscal year following our discussion of the consolidated results of operations. Additional information regarding our segments is included in Note 24 of our consolidated financial statements.
All revenue and cost of revenue amounts for the fiscal years ended January 31, 2018 and 2017 reported in this Item 7, Management's Discussion and Analysis of Financial Condition and Results of Operations, are presented on an as corrected basis after correcting for an immaterial error identified in our previously issued financial statements. See Note 26 to our consolidated financial statements included in this Form 10-K for additional information regarding the correction of this immaterial error.
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(dollars in thousands)
Equipment
 
 
 
 
 
Revenue
$
909,178

 
$
844,768

 
$
838,037

Cost of revenue
812,467

 
764,649

 
769,924

Gross profit
$
96,711

 
$
80,119

 
$
68,113

Gross profit margin
10.6
%
 
9.5
%
 
8.1
%
Parts
 
 
 
 
 
Revenue
$
210,796

 
$
203,231

 
$
214,103

Cost of revenue
149,615

 
143,729

 
149,212

Gross profit
$
61,181

 
$
59,502

 
$
64,891

Gross profit margin
29.0
%
 
29.3
%
 
30.3
%
Service
 
 
 
 
 
Revenue
$
86,840

 
$
88,794

 
$
94,408

Cost of revenue
29,036

 
30,679

 
31,490

Gross profit
$
57,804

 
$
58,115

 
$
62,918

Gross profit margin
66.6
%
 
65.4
%
 
66.6
%
Rental and other
 
 
 
 
 
Revenue
$
54,691

 
$
55,813

 
$
55,149

Cost of revenue
38,799

 
38,249

 
37,342

Gross profit
$
15,892

 
$
17,564

 
$
17,807

Gross profit margin
29.1
%
 
31.5
%
 
32.3
%

30

Table of Contents

The following table sets forth our statements of operations data expressed as a percentage of revenue for the fiscal years indicated.
 
Year Ended January 31,
 
2019
 
2018
 
2017
Revenue
 
 
 
 
 
Equipment
72.1
 %
 
70.8
 %
 
69.7
 %
Parts
16.7
 %
 
17.0
 %
 
17.8
 %
Service
6.9
 %
 
7.4
 %
 
7.9
 %
Rental and other
4.3
 %
 
4.7
 %
 
4.6
 %
Total Revenue
100.0
 %
 
100.0
 %
 
100.0
 %
Total Cost of Revenue
81.6
 %
 
81.9
 %
 
82.2
 %
Gross Profit Margin
18.4
 %
 
18.1
 %
 
17.8
 %
Operating Expenses
16.0
 %
 
17.0
 %
 
17.6
 %
Impairment of Intangible and Long-Lived Assets
0.2
 %
 
0.1
 %
 
0.4
 %
Restructuring Costs
 %
 
0.9
 %
 
 %
Income (Loss) from Operations
2.2
 %
 
0.1
 %
 
(0.2
)%
Other Income (Expense)
(0.9
)%
 
(1.3
)%
 
(1.7
)%
Income (Loss) Before Income Taxes
1.3
 %
 
(1.2
)%
 
(1.9
)%
Provision for (Benefit from) Income Taxes
0.3
 %
 
(0.6
)%
 
(0.7
)%
Net Income (Loss) Including Noncontrolling Interest
1.0
 %
 
(0.6
)%
 
(1.2
)%
Less: Net Income (Loss) Attributable to Noncontrolling Interest
 %
 
 %
 
 %
Net Income (Loss) Attributable to Titan Machinery Inc.
1.0
 %
 
(0.6
)%
 
(1.2
)%
Fiscal Year Ended January 31, 2019 Compared to Fiscal Year Ended January 31, 2018
Consolidated Results
Revenue
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019
 
2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Equipment
$
909,178

 
$
844,768

 
$
64,410

 
7.6
 %
Parts
210,796

 
203,231

 
7,565

 
3.7
 %
Service
86,840

 
88,794

 
(1,954
)
 
(2.2
)%
Rental and other
54,691

 
55,813

 
(1,122
)
 
(2.0
)%
Total Revenue
$
1,261,505

 
$
1,192,606

 
$
68,899

 
5.8
 %
The increase in total revenue for fiscal 2019, as compared to fiscal 2018, was the result of increased revenue from all segments. Same-store sales increased 5.1% over the comparable prior year period primarily as a result of an increase in equipment revenue within our Agriculture segment. Our total revenue increase was also positively impacted by our AGRAM acquisition.



31

Table of Contents

Gross Profit
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019

2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Gross Profit
 
 
 
 
 
 
 
Equipment
$
96,711

 
$
80,119

 
$
16,592

 
20.7
 %
Parts
61,181

 
59,502

 
1,679

 
2.8
 %
Service
57,804

 
58,115

 
(311
)
 
(0.5
)%
Rental and other
15,892

 
17,564

 
(1,672
)
 
(9.5
)%
Total Gross Profit
$
231,588

 
$
215,300

 
$
16,288

 
7.6
 %
Gross Profit Margin
 
 
 
 
 
 
 
Equipment
10.6
%
 
9.5
%
 
1.1
 %
 
11.6
 %
Parts
29.0
%
 
29.3
%
 
(0.3
)%
 
(1.0
)%
Service
66.6
%
 
65.4
%
 
1.2
 %
 
1.8
 %
Rental and other
29.1
%
 
31.5
%
 
(2.4
)%
 
(7.6
)%
Total Gross Profit Margin
18.4
%
 
18.1
%
 
0.3
 %
 
1.7
 %
Gross Profit Mix
 
 
 
 
 
 
 
Equipment
41.8
%
 
37.2
%
 
4.6
 %
 
12.4
 %
Parts
26.4
%
 
27.6
%
 
(1.2
)%
 
(4.3
)%
Service
25.0
%
 
27.0
%
 
(2.0
)%
 
(7.4
)%
Rental and other
6.8
%
 
8.2
%
 
(1.4
)%
 
(17.1
)%
Total Gross Profit Mix
100.0
%
 
100.0
%
 
 
 
 
Gross profit increased $16.3 million from fiscal 2018 to fiscal 2019 primarily due to higher revenue for fiscal 2019 and improved gross profit margin, from 18.1% in fiscal 2018 to 18.4% in fiscal 2019. The improvement in gross profit margin was the result of improved equipment margins driven by equipment pricing stabilization along with industry supply rightsizing to the level of demand.
Our company-wide absorption rate improved to 71.6% for fiscal 2019 as compared to 68.9% during fiscal 2018, primarily due to a reduction in our fixed operating costs and floorplan interest expense.
Operating Expenses
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019
 
2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Operating Expenses
$
201,537

 
$
203,203

 
$
(1,666
)
 
0.8
 %
Operating Expenses as a Percentage of Revenue
16.0
%
 
17.0
%
 
(1.0
)%
 
(5.9
)%
Our operating expenses for fiscal 2019 decreased $1.7 million as compared to fiscal 2018 and operating expenses as a percentage of revenue improved to 16.0% for fiscal 2019 from 17.0% in fiscal 2018. Operating expenses decreased primarily as a result of cost savings arising from our Fiscal 2018 Restructuring Plan partially offset by increases in our International segment operating expenses primarily resulting from our AGRAM acquisition. Operating expenses as a percentage of revenue improved primarily due to the impact of operating expense leverage resulting from higher fiscal 2019 sales volumes.

32

Table of Contents

Impairment and Restructuring Costs
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019
 
2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Impairment of Long-Lived Assets
$
2,156

 
$
673

 
$
1,483

 
n/m

Restructuring Costs
414

 
10,499

 
(10,085
)
 
96.0
%
During fiscal 2019, we recognized a total of $2.2 million in impairment expense related to long-lived assets, primarily in our Agriculture and Construction segments, compared to impairment expense of $0.7 million related to long-lived assets, primarily in our Construction segment in fiscal 2018. Restructuring costs of $0.4 million were recognized in fiscal 2019 related to the Company's revised assumptions, based on changes in circumstances, for our cease-use lease liabilities associated with certain of our previously closed stores. Restructuring costs of $10.5 million were recognized in fiscal 2018 relating to charges recognized in connection with our Fiscal 2018 Restructuring Plan and included accrued charges for lease terminations and remaining lease obligations, employee termination benefits, and the costs associated with relocating certain assets of our closed stores. See Note 12 to our consolidated financial statements for further details on our previously implemented store restructuring plans and associated exit costs.
Other Income (Expense)
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019
 
2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Interest income and other income (expense)
$
2,548

 
$
1,635

 
$
913

 
55.8
%
Floorplan interest expense
(6,114
)
 
(8,152
)
 
(2,038
)
 
25.0
%
Other interest expense
(7,761
)
 
(8,847
)
 
(1,086
)
 
12.3
%
The decrease in floorplan interest expense for fiscal 2019, as compared to fiscal 2018, was primarily due to a decrease in our interest-bearing inventory in fiscal 2019. In addition, floorplan interest expense for fiscal 2018 included $0.6 million of expense resulting from the termination and reclassification of accumulated losses on our interest rate swap instrument. Interest expense associated with our Senior Convertible Notes, which is reflected in other interest expense, decreased $1.3 million in fiscal 2019 compared to fiscal 2018 due to interest savings resulting from our repurchases of our Senior Convertible Notes. Other interest expense in fiscal 2018 also includes $0.4 million of debt issuance cost write-offs recognized as a result of our election to reduce the maximum available credit under our Wells Fargo Credit Agreement.
Provision for (Benefit from) Income Taxes
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019
 
2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Provision for (Benefit from) Income Taxes
$
3,972

 
$
(7,390
)
 
$
11,362

 
n/m
Our effective tax rate changed from 51.2% in fiscal 2018 to 24.6% in fiscal 2019. Our effective tax rate has been impacted by the enactment on December 22, 2017 of federal tax legislation commonly referred to as the Tax Cuts and Jobs Act (the "Tax Act"). The Tax Act reduced the U.S. federal corporate tax rate from 35% to 21%. The Company recorded a net tax benefit of $1.8 million for the fiscal year ended January 31, 2018 as a result of remeasuring its domestic net deferred tax liabilities at a federal rate of 21% as this is the rate at which these deferred tax amounts are expected to reverse in future periods.
The Company's effective tax rate was also impacted by changes in valuation allowances recognized for deferred tax assets, including net operating losses in certain of our domestic and international jurisdictions. The Company concluded during fiscal 2018 that, based on all available evidence, it was more likely than not that it would have sufficient future taxable income to realize the deferred tax assets of its Ukrainian subsidiary. As a result, the Company released the $3.5 million valuation allowance in fiscal 2018 and recognized a corresponding benefit from income taxes. The Company's conclusion regarding the realizability of such deferred tax assets was based on our recent profitable operations resulting in a cumulative profit over the three-year period ended January 31, 2018 in Ukraine, our projections of future profitability, the relative economic and geopolitical stability in Ukraine and the unlimited carryforward period of net operating losses in Ukraine.

33

Table of Contents

See Note 17 to our consolidated financial statements for further details on our effective tax rate.
Segment Results
 
Year Ended January 31,
 
Increase/
 
Percent
 
2019
 
2018
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Revenue
 
 
 
 
 
 
 
Agriculture
$
726,793

 
$
689,854

 
$
36,939

 
5.4
%
Construction
301,989

 
293,860

 
8,129

 
2.8
%
International
232,723

 
208,892

 
23,831

 
11.4
%
Total
$
1,261,505

 
$
1,192,606

 
$
68,899

 
5.8
%
 
 
 
 
 
 
 
 
Income (Loss) Before Income Taxes
 
 
 
 
 
 
 
Agriculture
$
16,799

 
$
(3,678
)
 
$
20,477

 
n/m

Construction
(4,400
)
 
(7,278
)
 
2,878

 
39.5
%
International
5,160

 
2,205

 
2,955

 
134.0
%
Segment income (loss) before income taxes
17,559

 
(8,751
)
 
26,310

 
n/m

Shared Resources
(1,405
)
 
(5,688
)
 
4,283

 
75.3
%
Total
$
16,154

 
$
(14,439
)
 
$
30,593

 
n/m

Agriculture
Agriculture segment revenue for fiscal 2019 increased 5.4% compared to the same period last year. Agriculture same-store sales for fiscal 2019 increased 6.4% as compared to fiscal 2018. The increase in same-store sales was primarily due to an increase in equipment revenue arising from customer replacement demand.
Agriculture segment income before income taxes for fiscal 2019 improved by $20.5 million compared to the same period last year. The improvement in segment results was largely the result of higher equipment gross profit margins and increased equipment sales volume along with operating expense savings as a result of our Fiscal 2018 Restructuring Plan and a decrease in restructuring and impairment charges and floorplan interest expense. Restructuring and impairment charges decreased from $7.1 million in fiscal 2018 to $1.3 million in fiscal 2019. Floorplan interest expense decreased as the result of a decrease in our interest-bearing inventory in fiscal 2019 compared to the same period last year.
Construction
Construction segment revenue for fiscal 2019 increased 2.8% compared to fiscal 2018, all of which was a same-store sales increase. The increase in segment revenue was primarily driven by an increase in equipment revenue.
Our Construction segment loss before income taxes was $4.4 million for fiscal 2019 compared to $7.3 million for fiscal 2018. The improvement in segment results was primarily due to a decrease in restructuring and impairment charges and reduced floorplan and other interest expense. Restructuring and impairment costs decreased from $2.6 million for fiscal 2018 to $1.1 million for fiscal 2019. The decrease in floorplan and other interest expense was primarily due to a reduced level of interest-bearing inventory and rental fleet in fiscal 2019 compared to fiscal 2018. The dollar utilization of our rental fleet was 23.9% in fiscal 2019, which was relatively flat as compared to fiscal 2018 dollar utilization of 23.6%.
International
International segment revenue for fiscal 2019 increased 11.4% compared to fiscal 2018 primarily due to our AGRAM acquisition along with an increase in equipment revenue. Equipment revenue increased in fiscal 2019 primarily due to continued strong demand in certain of our markets, which was aided by subvention funds and strong calendar year 2017 crop yields.
Our International segment income before income taxes was $5.2 million for fiscal 2019 compared to $2.2 million for the same period last year. The increase in segment income before income taxes was primarily due to the increase in segment revenue as noted above plus increased equipment gross profit margins, but partially offset by an increase in operating expenses resulting from our AGRAM acquisition and the continued build-out of our footprint and presence in our European markets.

34

Table of Contents

Shared Resources/Eliminations
We incur centralized expenses/income at our general corporate level, which we refer to as “Shared Resources,” and then allocate most of these net expenses to our segments. Since these allocations are set early in the year, and a portion is planned to be unallocated, unallocated balances may occur. Shared Resource loss before income taxes was $1.4 million for fiscal 2019 compared to $5.7 million for fiscal 2018. For fiscal 2019, the improvement in Shared Resource results was driven primarily by a decrease in restructuring costs and operating expenses related to the Fiscal 2018 Restructuring Plan. Restructuring costs decreased $1.5 million in fiscal 2019 compared to fiscal 2018.
Fiscal Year Ended January 31, 2018 Compared to Fiscal Year Ended January 31, 2017
Consolidated Results
Revenue
 
Year Ended January 31,
 
Increase/
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Equipment
$
844,768

 
$
838,037

 
$
6,731

 
0.8
 %
Parts
203,231

 
214,103

 
(10,872
)
 
(5.1
)%
Service
88,794

 
94,408

 
(5,614
)
 
(5.9
)%
Rental and other
55,813

 
55,149

 
664

 
1.2
 %
Total Revenue
$
1,192,606

 
$
1,201,697

 
$
(9,091
)
 
(0.8
)%
The decrease in total revenue for fiscal 2018, as compared to fiscal 2017, was primarily the result of a decrease in Agriculture and Construction segment revenue partially offset by an increase in our International segment. Agriculture and Construction revenue decreased primarily due to our store closings associated with our Fiscal 2018 Restructuring Plan. In addition, included as revenue in fiscal 2017 was $42.1 million of equipment sales that was recognized as a result of our expanded marketing efforts of aged inventories.


35

Table of Contents

Gross Profit
 
Year Ended January 31,
 
Increase/
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Gross Profit
 
 
 
 
 
 
 
Equipment
$
80,119

 
$
68,113

 
$
12,006

 
17.6
 %
Parts
59,502

 
64,891

 
(5,389
)
 
(8.3
)%
Service
58,115

 
62,918

 
(4,803
)
 
(7.6
)%
Rental and other
17,564

 
17,807

 
(243
)
 
(1.4
)%
Total Gross Profit
$
215,300

 
$
213,729

 
$
1,571

 
0.7
 %
Gross Profit Margin
 
 
 
 
 
 
 
Equipment
9.5
%
 
8.1
%
 
1.4
 %
 
17.3
 %
Parts
29.3
%
 
30.3
%
 
(1.0
)%
 
(3.3
)%
Service
65.4
%
 
66.6
%
 
(1.2
)%
 
(1.8
)%
Rental and other
31.5
%
 
32.3
%
 
(0.8
)%
 
(2.5
)%
Total Gross Profit Margin
18.1
%
 
17.8
%
 
0.3
 %
 
1.7
 %
Gross Profit Mix
 
 
 
 
 
 
 
Equipment
37.2
%
 
31.9
%
 
5.3
 %
 
16.6
 %
Parts
27.6
%
 
30.4
%
 
(2.8
)%
 
(9.2
)%
Service
27.0
%
 
29.4
%
 
(2.4
)%
 
(8.2
)%
Rental and other
8.2
%
 
8.3
%
 
(0.1
)%
 
(1.2
)%
Total Gross Profit Mix
100.0
%
 
100.0
%
 
 %
 
 %
Gross profit remained relatively flat, increasing $1.6 million from fiscal 2017 to fiscal 2018. Gross profit margin remained relatively consistent, increasing from 17.8% in fiscal 2017 to 18.1% in fiscal 2018. The increase in gross profit and gross profit margin was mainly due to higher equipment revenues and higher gross profit margins on equipment revenue.
Our company-wide absorption rate decreased slightly to 68.9% for fiscal 2018 from 69.2% for fiscal 2017 due to our decrease in gross profit from parts, service and rental and other in fiscal 2018 partially offset by a reduction in our fixed operating costs and floorplan interest expense.
Operating Expenses
 
Year Ended January 31,
 
Increase/
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Operating Expenses
$
203,203

 
$
211,372

 
$
(8,169
)
 
(3.9
)%
Operating Expenses as a Percentage of Revenue
17.0
%
 
17.6
%
 
(0.6
)%
 
3.4
 %
The $8.2 million decrease in operating expenses was primarily the result of cost savings resulting from our Fiscal 2018 Restructuring Plan, in which we reduced our headcount and generated additional cost savings associated with the closing of 15 stores. The decrease in operating expenses as a percentage of total revenue reflects the benefits of our cost-saving initiatives.
Impairment & Restructuring Costs
 
Year Ended January 31,
 
Increase
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Impairment of Long-Lived Assets
673

 
4,410

 
(3,737
)
 
(84.7
)%
Restructuring Costs
10,499

 
319

 
10,180

 
n/m

During fiscal 2018, we recognized a total of $0.7 million in impairment expense related to long-lived assets, compared to impairment expense of $4.4 million in fiscal 2017. The restructuring costs recognized in fiscal 2018 and fiscal 2017 occurred

36

Table of Contents

as a result of our store restructuring plans and associated exit costs, including accruals for lease terminations and remaining lease obligations, employee termination benefits, and the costs associated with relocating certain assets of our closed stores. See Note 12 to our consolidated financial statements for further details on our previously implemented store restructuring plans and associated exit costs.
Other Income (Expense)
 
Year Ended January 31,
 
Increase/
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Interest income and other income (expense)
$
1,635

 
$
1,524

 
$
111

 
7.3
 %
Floorplan interest expense
(8,152
)
 
(13,560
)
 
(5,408
)
 
(39.9
)%
Other interest expense
(8,847
)
 
(8,305
)
 
542

 
6.5
 %
The decrease in floorplan interest expense for fiscal 2018, as compared to fiscal 2017, was primarily due to a decrease in our interest-bearing inventory in fiscal 2018. For fiscal 2017, other interest expense included $3.1 million of gains recognized as a result of our repurchases of $54.3 million face value of Senior Convertible Notes. Interest expense associated with our Senior Convertible Notes, which is reflected in other interest expense, decreased $2.3 million in fiscal 2018 compared to fiscal 2017 due to interest savings resulting from our repurchases of our Senior Convertible Notes. Other interest expense also includes $0.4 million of debt issuance cost write-offs recognized in fiscal 2018 as a result of our election to reduce the maximum available credit under our Wells Fargo Credit Agreement.
Benefit from Income Taxes
 
Year Ended January 31,
 
Increase/
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Benefit from Income Taxes
$
(7,390
)
 
$
(8,178
)
 
$
(788
)
 
(9.6
)%
Our effective tax rate changed from 36.0% in fiscal 2017 to 51.2% in fiscal 2018. Our effective tax rate for fiscal 2018 was impacted by the enactment on December 22, 2017 of federal tax legislation commonly referred to as the Tax Cuts and Jobs Act (the "Tax Act"). The Tax Act reduced the U.S. federal corporate tax rate from 35% to 21%. The Company recorded a net tax benefit of $1.8 million for the year ended January 31, 2018 as a result of remeasuring its domestic net deferred tax liabilities at a federal rate of 21% as this is the rate at which these deferred tax amounts are expected to reverse in future periods.
The Company's effective tax rate was also impacted by changes in valuation allowances recognized for deferred tax assets, including net operating losses in certain of our domestic and international jurisdictions. The Company concluded in the fourth quarter of fiscal 2018 that, based on all available evidence, it was more likely than not that it would have sufficient future taxable income to realize the deferred tax assets of its Ukrainian subsidiary. As a result, the Company released the $3.5 million valuation allowance in the fourth quarter of fiscal 2018 and recognized a corresponding benefit from income taxes. The Company's conclusion regarding the realizability of such deferred tax assets was based on our recent profitable operations resulting in a cumulative profit over the three-year period ending January 31, 2018 in Ukraine, our projections of future profitability, the relative economic and geopolitical stability in Ukraine and the unlimited carryforward period of net operating losses in Ukraine.

37

Table of Contents

Segment Results
 
Year Ended January 31,
 
Increase/
 
Percent
 
2018
 
2017
 
(Decrease)
 
Change
 
(dollars in thousands)
 
 
Revenue
 
 
 
 
 
 
 
Agriculture
$
689,854

 
$
734,283

 
$
(44,429
)
 
(6.1
)%
Construction
293,860

 
317,126

 
(23,266
)
 
(7.3
)%
International
208,892

 
150,288

 
58,604

 
39.0
 %
Total
$
1,192,606

 
$
1,201,697

 
$
(9,091
)
 
(0.8
)%
 
 
 
 
 
 
 
 
Income (Loss) Before Income Taxes
 
 
 
 
 
 
 
Agriculture
$
(3,678
)
 
$
(15,781
)
 
$
12,103

 
76.7
 %
Construction
(7,278
)
 
(5,875
)
 
(1,403
)
 
(23.9
)%
International
2,205

 
(469
)
 
2,674

 
n/m

Segment income (loss) before income taxes
(8,751
)
 
(22,125
)
 
13,374

 
60.4
 %
Shared Resources
(5,688
)
 
(588
)
 
(5,100
)
 
n/m

Total
$
(14,439
)
 
$
(22,713
)
 
$
8,274

 
36.4
 %
Agriculture
Agriculture segment revenue for fiscal 2018 decreased 6.1% compared to fiscal 2017. The revenue decrease was primarily due to a decrease in revenue resulting from the impact of our store closings associated with our Fiscal 2018 Restructuring Plan. Agriculture same-store sales for fiscal 2018 increased 4.2% as compared to fiscal 2017.
Agriculture segment loss before income taxes for fiscal 2018 improved by $12.1 million compared to fiscal 2017. The decrease in segment loss before income taxes was largely the result of higher gross profit margins on equipment revenue, operating expense savings as a result of our Fiscal 2018 Restructuring Plan and a decrease in floorplan interest expense as the result of a decrease in our interest-bearing inventory in fiscal 2018. These improvements were partially offset by a higher level of restructuring and impairment costs in fiscal 2018 as compared to fiscal 2017.
Construction
Construction segment revenue for fiscal 2018 decreased 7.3% compared to fiscal 2017. The revenue decrease was due to a Construction same-store sales decrease of 6.8% compared to fiscal 2017. This decrease was primarily the result of decreased equipment revenue. In fiscal 2017, we recognized $19.3 million of equipment revenue as a result of our expanded marketing efforts of aged inventories, a portion of such revenue was incremental revenue recognized in fiscal 2017.
Our Construction segment loss before income taxes was $7.3 million for fiscal 2018 compared to $5.9 million for fiscal 2017. The decline in segment results was primarily due to the decrease in revenue noted above, but partially offset by decreases in operating expenses and floorplan interest expense. The decrease in operating expenses reflects cost savings associated with our Fiscal 2018 Restructuring Plan, and the decrease in floorplan interest expense is the result of a decrease in our interest-bearing inventory in fiscal 2018 as compared to fiscal 2017. The dollar utilization of our rental fleet was 23.6% in fiscal 2018, which was relatively flat as compared to fiscal 2017 dollar utilization of 24.0%.
International
International segment revenue for fiscal 2018 increased 39.0% compared to the same period last year primarily due to increased equipment revenue. Equipment revenue increased in fiscal 2018 primarily due to the build-out of our footprint, availability of government subsidy program funds, and positive crop conditions in certain of our markets.
Our International segment income before income taxes was $2.2 million for fiscal 2018 compared to segment loss before income taxes of $0.5 million for fiscal 2017. The increase in segment income before income taxes was primarily due to the increase in segment revenue as noted above, but partially offset by an increase in operating expenses resulting from the continued build-out of our footprint and presence in our European markets.


38

Table of Contents

Shared Resources/Eliminations
We incur centralized expenses/income at our general corporate level, which we refer to as “Shared Resources,” and then allocate most of these net expenses to our segments. Since these allocations are set early in the year, and a portion is planned to be unallocated, unallocated balances may occur. Shared Resource loss before income taxes was $5.7 million for fiscal 2018 compared to $0.6 million for fiscal 2017. For fiscal 2018, loss before income taxes was impacted by $1.5 million in restructuring costs related to the Fiscal 2018 Restructuring Plan and $0.6 million in floorplan interest expense related to the interest rate swap termination and reclassification. For fiscal 2017, loss before income taxes included a $3.1 million gain recognized as a result of our repurchases of $54.3 million face value of Senior Convertible Notes.
Non-GAAP Financial Measures
To supplement our net income (loss) including noncontrolling interest and diluted earnings (loss) per share ("diluted EPS"), both GAAP measures, we use adjusted net income (loss) including noncontrolling interest, adjusted diluted EPS, and adjusted EBITDA, all non-GAAP measures. Generally, these non-GAAP measures include adjustments for items such as restructuring costs, long-lived asset impairment charges, gains and losses recognized on the repurchase of our Senior Convertible Notes, and other gains and losses. We believe that the presentation of adjusted net income (loss) including noncontrolling interest, adjusted diluted EPS and adjusted EBITDA is relevant and useful to our management and investors because it provides a measurement of earnings on activities that we consider to occur in the ordinary course of our business. Adjusted net income (loss) including noncontrolling interest, adjusted diluted EPS, and adjusted EBITDA should be evaluated in addition to, and not considered a substitute for, or superior to, the most comparable GAAP measure. In addition, other companies may calculate these non-GAAP measures in a different manner, which may hinder comparability of our results with those of other companies.
The following tables reconcile net income (loss) including noncontrolling interest and diluted EPS, GAAP measures, to adjusted net income (loss) including noncontrolling interest, adjusted diluted EPS, and adjusted EBITDA, all non-GAAP measures.
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(dollars in thousands, except per share data)
Adjusted Net Income (Loss) Including Noncontrolling Interest
 
 
 
 
 
Net Income (Loss) Including Noncontrolling Interest
$
12,182

 
$
(7,049
)
 
$
(14,535
)
Adjustments
 
 
 
 
 
(Gain) loss on repurchase of senior convertible notes
615

 
(22
)
 
(3,130
)
Debt issuance cost write-off

 
416

 
624

Restructuring & impairment charges
2,570

 
11,172

 
4,729

Ukraine remeasurement (1)

 

 
195

Interest rate swap termination & reclassification

 
631

 

Gain on insurance recoveries

 

 
(1,997
)
Total Pre-Tax Adjustments
3,185

 
12,197

 
421

Less: Tax Effect of Adjustments (2)
636

 
4,103

 
(6
)
Less: Tax Benefit from Tax Act (3)

 
1,809

 

Plus: Income Tax Valuation Allowance (4)

 
(1,920
)
 
(44
)
Total Adjustments
2,549

 
4,365

 
383

Adjusted Net Income (Loss) Including Noncontrolling Interest
$
14,731

 
$
(2,684
)
 
$
(14,152
)
 
 
 
 
 
 

39

Table of Contents

 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(dollars in thousands, except per share data)
Adjusted Diluted EPS
 
 
 
 
 
Diluted EPS
$
0.55

 
$
(0.32
)
 
$
(0.65
)
Adjustments (5)
 
 
 
 
 
(Gain) loss on repurchase of senior convertible notes
0.03

 

 
(0.15
)
Debt issuance cost write-off

 
0.02

 
0.03

Restructuring & impairment charges
0.12

 
0.51

 
0.21

Ukraine remeasurement

 

 
0.01

Interest rate swap termination & reclassification

 
0.03

 

Gain on insurance recoveries

 

 
(0.10
)
Total Pre-Tax Adjustments
0.15

 
0.56

 

Less: Tax Effect of Adjustments (2)
0.03

 
0.19

 

Less: Tax Benefit from Tax Act (3)

 
0.08

 

Plus: Income Tax Valuation Allowance (4)

 
(0.09
)
 

Total Adjustments
0.12

 
0.20

 

Adjusted Diluted EPS
$
0.67

 
$
(0.12
)
 
$
(0.65
)
 
 
 
 
 
 
Adjusted EBITDA
 
 
 
 
 
Net Income (Loss) Including Noncontrolling Interest
$
12,182

 
$
(7,049
)
 
$
(14,535
)
Adjustments
 
 
 
 
 
Interest expense, net of interest income
6,818

 
7,935

 
7,112

Provision for (benefit from) income taxes
3,972

 
(7,390
)
 
(8,178
)
Depreciation and amortization
23,605

 
25,105

 
26,868

EBITDA
46,577

 
18,601

 
11,267

Adjustments
 
 
 
 
 
(Gain) loss on repurchase of senior convertible notes
615

 
$
(22
)
 
(3,130
)
Debt issuance cost write-off

 
416

 
624

Restructuring & impairment charges
2,570

 
11,172

 
4,729

Ukraine remeasurement

 

 
195

Interest rate swap termination & reclassification

 
631

 

Gain on insurance recoveries

 

 
(1,997
)
Total Adjustments
3,185

 
12,197

 
421

Adjusted EBITDA
$
49,762

 
$
30,798

 
$
11,688

(1)
Beginning in the second quarter of fiscal 2017 we discontinued incorporating Ukraine remeasurement losses into our adjusted income (loss) and earnings (loss) per share calculations. The Ukrainian hryvnia (UAH) remained relatively stable subsequent to April 30, 2016 and therefore did not significantly impact our consolidated statement of operations during this period. Absent any future significant hryvnia volatility and resulting financial statement impact, we will not include Ukraine remeasurement losses in our adjusted amounts in future periods.
(2)
The tax effect of adjustments for all U.S. related items was determined using the federal statutory tax rate applicable to the respective period and no impact for state taxes given our valuation allowances against state deferred tax assets. The federal statutory tax rate for the years ended January 31, 2019, 2018, and 2017 was 21.0%, 33.8%, and 35.0%. No tax effect was recognized for foreign related items as all adjustments occurred in foreign jurisdictions that have full valuation allowances on deferred tax assets.
(3)
Tax benefit recognized as a result of the Tax Act enacted on December 22, 2017.
(4)
Amounts reflect the tax benefit recognized from the release of the valuation allowance on our Ukrainian deferred tax assets, net of the incremental valuation allowance recognized as a result of restructuring costs incurred during the fiscal year ended January 31, 2018.
(5)
Adjustments are net of the impact of amounts attributable to noncontrolling interests and allocated to participating securities where applicable.

40

Table of Contents

For other non-GAAP measures, see our discussion of Adjusted Cash Flow in the Cash Flow section elsewhere within this Item 7 of our Form 10-K.
Liquidity and Capital Resources
Sources of Liquidity
Our primary sources of liquidity are cash reserves, cash generated from operations, and borrowings under our floorplan payable and other credit facilities. We expect these sources of liquidity to be sufficient to fund our working capital requirements, acquisitions, capital expenditures and other investments in our business, service our debt, pay our tax and lease obligations and other commitments and contingencies, and meet any seasonal operating requirements for the foreseeable future, provided, however, that our borrowing capacity under our credit agreements is dependent on compliance with various financial covenants as further described in Note 7 to our consolidated financial statements included in this Form 10-K. We have worked in the past, and will continue to work in the future, with our lenders to implement satisfactory modifications to these financial covenants when appropriate for the business conditions confronted by us.
Equipment Inventory and Floorplan Payable Credit Facilities
Floorplan payable balances reflect the amount owed for new equipment inventory purchased from a manufacturer and used equipment inventory, which is primarily purchased through trade-in on equipment sales, net of unamortized debt issuance costs incurred for floorplan credit facilities. Certain of the manufacturers from which we purchase new equipment inventory offer financing on these purchases, either offered directly from the manufacturer or through the manufacturers’ captive finance affiliate. CNH Industrial's captive finance subsidiary, CNH Industrial Capital, also provides financing of used equipment inventory. We also have floorplan payable balances with non-manufacturer lenders for new and used equipment inventory. Borrowings and repayments on manufacturer floorplan facilities are reported as operating cash flows, while borrowings and repayments on non-manufacturer floorplan facilities are reported as financing cash flows in our consolidated statements of cash flows.
As of January 31, 2019, we had floorplan payable lines of credit for equipment purchases totaling $640.0 million, which includes a $400.0 million credit facility with CNH Industrial Capital, a $140.0 million floorplan payable line under the Wells Fargo Credit Agreement, a $45.0 million credit facility with DLL Finance and additional credit facilities related to our foreign subsidiaries. Available borrowing capacity under these lines of credit are reduced by amounts outstanding under such facilities, borrowing base calculations and amount of standby letters of credit outstanding with respect to the Wells Fargo Credit Agreement, and certain acquisition-related financing arrangements with respect to the CNH Industrial Capital credit facility. As of January 31, 2019, the Company was in compliance with the financial covenants under its credit agreements. Additional details on each of these credit facilities is disclosed in Note 7 to our consolidated financial statements included in this annual report.
The maturity date of the Wells Fargo Credit Agreement was contingent upon the results of a maturity test that was performed on February 1, 2019, a date that was three months prior to the scheduled maturity date of the Company's outstanding Senior Convertible Notes. Pursuant to the test, the maturity date for the Wells Fargo Credit Agreement would be October 28, 2020 so long as (i) the Company's fixed charge coverage ratio for the 12 month period ended December 31, 2018 was at least 1.10 to 1.00 and (ii) a liquidity test, requiring that the Company have unrestricted cash on hand plus excess borrowing availability under the Wells Fargo Credit Agreement (on a pro-forma basis reflecting the Company's repayment in full of its outstanding Senior Convertible Notes) in an amount that is greater than 20% of the maximum credit amount under the facility, was met on February 1, 2019. If both financial tests were not satisfied on February 1, 2019, the Wells Fargo Credit Agreement would immediately mature and all amounts outstanding become immediately due and payable in full. The Company satisfied the maturity test requirements on February 1, 2019, and therefore the maturity date of the Wells Fargo Credit Agreement is October 28, 2020. The Company’s available borrowings under the Wells Fargo Credit Agreement are reduced by the amount of outstanding Senior Convertible Notes until the notes are repaid in full on May 1, 2019.
Our equipment inventory turnover remained flat at 1.8 times for fiscal 2019 and fiscal 2018. Our equipment inventories increased 4.3% from January 31, 2018 to January 31, 2019. The increase in equipment sales volume in fiscal 2019 as compared to fiscal 2018 was offset by the increase in our average equipment inventory over these time periods. Our equity in equipment inventory, which reflects the portion of our equipment inventory balance that is not financed by floorplan payables, decreased to 34.4% as of January 31, 2019 from 38.2% as of January 31, 2018. The decrease in our equity in equipment inventory is primarily due to the use of our floorplan lines of credit to reduce long-term debt, including our Senior Convertible Notes.



41

Table of Contents

Senior Convertible Notes
The Company's Senior Convertible Notes mature on May 1, 2019, unless purchased earlier by the Company, redeemed or converted. The outstanding principal balance of Senior Convertible Notes as of January 31, 2019 was $45.6 million. The Company expects to have sufficient available cash and sufficient available borrowing capacity under its various floorplan payable and other credit facilities to satisfy the principal balance of our Senior Convertible Notes on the May 1, 2019 maturity date.
Long-Term Debt Facilities
We have a $60.0 million working capital line of credit under the Wells Fargo Credit Agreement (the "Working Capital Line"). The Working Capital Line is used to finance our working capital requirements and fund certain capital expenditures. As of January 31, 2019, we had no amount outstanding on the Working Capital Line. We may also finance a portion of our rental fleet and other property and equipment with long-term debt with various lenders.
Adequacy of Capital Resources
Our primary uses of cash have been to fund our operating activities, including the purchase of inventories and providing for other working capital needs, meeting our debt service requirements, making payments due under our various leasing arrangements, funding capital expenditures, including rental fleet assets, and, from time to time, opportunistically repurchasing our outstanding convertible notes. The primary factor affecting our ability to generate cash and to meet existing, known or reasonably possible cash requirements is our operating performance as impacted by (i) industry factors, (ii) competition, (iii) general economic conditions, (iv) the timing and extent of acquisitions, and (v) business and other factors including those identified in Item 1A "Risk Factors" and discussed in this Form 10-K.
Our ability to service our debt will depend upon our ability to generate the necessary cash. This will depend on our future acquisition activity, operating performance, general economic conditions, and financial, competitive, business and other factors, some of which are beyond our immediate control. Based on our current operational performance, we believe our cash flow from operations, available cash and available borrowings under our existing credit facilities will be adequate to meet our liquidity needs for, at a minimum, the next 12 months.
In fiscal 2019, we used $5.7 million in cash for rental fleet purchases and $6.3 million in cash for property and equipment purchases and financed $5.2 million in property and equipment purchases with long-term debt and capital leases. The property and equipment purchases primarily related to the purchase of vehicles and improvements to, or purchase of, real estate assets. In fiscal 2018, we used $12.6 million in cash for rental fleet purchases, $13.5 million in cash for property and equipment purchases, and financed $0.8 million in property and equipment purchases with long-term debt. The property and equipment purchases primarily related to the purchase of vehicles, trucks and real estate. We expect our cash expenditures for property and equipment, exclusive of rental fleet, for fiscal 2020 to be approximately $20.0 million and expect cash expenditures for rental fleet for fiscal 2020 to be approximately $15.0 million. The actual amount of our fiscal 2020 capital expenditures will depend upon factors such as general economic conditions, growth prospects for our industry and our decisions regarding financing and leasing options. We currently expect to finance property and equipment purchases with borrowings under our existing credit facilities, financing with long-term debt, with available cash or with cash flow from operations. We may need to incur additional debt if we pursue any future acquisitions.
There can be no assurances, however, that our business will generate sufficient cash flow from operations or that future borrowings will be available under the credit facilities with Wells Fargo, CNH Industrial Capital and DLL Finance in amounts sufficient to allow us to service our indebtedness and to meet our other commitments. If we are unable to generate sufficient cash flow from operations or to obtain sufficient future borrowings, we may be required to seek one or more alternatives such as refinancing or restructuring our indebtedness, selling material assets or operations or seeking to raise additional debt or equity capital. There can be no assurances that we will be able to succeed with one of these alternatives on commercially reasonable terms, if at all. In addition, if we pursue strategic acquisitions, we may require additional equity or debt financing to consummate the transactions, and we cannot assure you that we will succeed in obtaining this financing on favorable terms or at all. If we incur additional indebtedness to finance any of these transactions, this may place increased demands on our cash flow from operations to service the resulting increased debt. Our existing debt agreements contain restrictive covenants that may restrict our ability to adopt any of these alternatives. Any non-compliance by us under the terms of our debt agreements could result in an event of default which, if not cured, could result in the acceleration of our debt. We have met all financial covenants under these credit agreements as of January 31, 2019. We do not anticipate being in violation of any financial covenants in the foreseeable future. If anticipated operating results create the likelihood of a future covenant violation, we would seek to work with our lenders on an appropriate modification or amendment to our financing arrangements.

42

Table of Contents

Cash Flow
Cash Flow Provided By Operating Activities
Net cash provided by operating activities in fiscal 2019 was $46.6 million compared to $95.8 million in fiscal 2018. The decrease in net cash provided by operating activities of $49.2 million from fiscal 2018 to fiscal 2019 was primarily attributable to changes in inventory and a changing mix in floorplan financing. During fiscal 2018, we drew on our manufacturing floorplan lines of credit and paid down our non-manufacturing floorplan lines of credit and repurchased a portion of our Senior Convertible Notes. We evaluate our cash flow from operating activities net of all floorplan payable activity and maintaining a constant level of equity in our inventory. Taking these adjustments into account, our adjusted cash provided by operating activities was $47.4 million for fiscal 2019 compared to $45.6 million for fiscal 2018. For a reconciliation of this adjusted cash provided by operating activities to the comparative GAAP financial measure, refer to the Adjusted Cash Flow Reconciliation below.
Net cash provided by operating activities was $95.8 million in fiscal 2018 compared to $141.0 million in fiscal 2017. The decrease in net cash provided by operating activities of $45.2 million from fiscal 2017 to fiscal 2018 was primarily attributable to changes in inventory, net of related changes in manufacturer floorplan payable balances. Our adjusted cash provided by operating activities was $45.6 million for fiscal 2018 and was $88.8 million for fiscal 2017. This decrease from fiscal 2017 to fiscal 2018 in adjusted cash provided by operating activities was primarily due to the aforementioned change in inventory, net of the related changes in floorplan payable balances. For a reconciliation of adjusted cash provided by operating activities to the comparative GAAP financial measure, refer to the Adjusted Cash Flow Reconciliation below.
Cash Flow Used For Investing Activities
Net cash used for investing activities is primarily comprised of cash used for property and equipment purchases, including rental fleet, and for business acquisitions.
Net cash used for investing activities was $25.8 million in fiscal 2019, compared to net cash used for investing activities of $24.6 million in fiscal 2018. The increase in cash used for investing activities was the result of cash used for our acquisition of AGRAM, but partially offset by lower levels of capital expenditures during fiscal 2019 compared to fiscal 2018 as we seek to manage our level of rental fleet assets and have elected to finance certain other capital expenditures through capital leasing arrangements in fiscal 2019. In fiscal 2019, we used $12.0 million of cash for property and equipment purchases compared to $26.1 million in fiscal 2018, primarily related to rental fleet, vehicles and construction of, improvements to, or purchases of real estate assets. These uses of cash were partially offset by cash proceeds received upon the sale of property and equipment.
Net cash used for investing activities was $24.6 million in fiscal 2018, compared to net cash used for investing activities of $9.1 million in fiscal 2017. In fiscal 2018, we had cash used for property and equipment purchases, including rental fleet, totaling $26.1 million, which primarily related to rental fleet, vehicles and construction of, improvements to, or purchases of real estate assets. These uses of cash were offset by $5.0 million received upon the sale of property and equipment. The increase in net cash used for investing activities from fiscal 2017 to fiscal 2018 was primarily due an increase in property and equipment purchases in fiscal 2018.
Cash Flow Used For Financing Activities
Net cash used for financing activities was $16.7 million in fiscal 2019, compared to net cash used for financing activities of $71.5 million in fiscal 2018. In fiscal 2019, net cash used for financing activities was the result of increased non-manufacturer floorplan payables, the proceeds of which were partially used to repurchase $20.0 million face value of our Senior Convertible Notes using $20.0 million in cash and to repay all amounts outstanding under our working capital line under our Wells Fargo Credit Agreement.
Net cash used for financing activities was $71.5 million in fiscal 2018 and $168.0 million in fiscal 2017. In fiscal 2018, net cash used for financing activities primarily resulted from the repayment of our non-manufacturer floorplan payables and the use of $29.1 million in cash to repurchase a portion of our Senior Convertible Notes.
Adjusted Cash Flow Reconciliation
We consider our cash flow from operating activities to include all equipment inventory financing activity regardless of whether we obtain the financing from a manufacturer or other source. GAAP requires the cash flows associated with non-manufacturer floorplan payables to be recognized as financing cash flows in the consolidated statement of cash flows. We consider equipment inventory financing with both manufacturers and other sources to be part of the normal operations of our business. We also evaluate our cash flow from operating activities by assuming a constant level of equity in our equipment inventory. Our equity in our equipment inventory reflects the portion of our equipment inventory balance that is not financed by

43

Table of Contents

floorplan payables. Our adjustment to maintain a constant level of equity in our equipment inventory is equal to the difference between our actual level of equity in equipment inventory at each period-end presented on the consolidated statements of cash flows compared to the actual level of equity in equipment inventory at the beginning of the fiscal year. We refer to this measure of cash flow as Adjusted Cash Flow.
Our equity in equipment inventory was 34.4%, 38.2% and 41.1% as of January 31, 2019, 2018 and 2017.
Adjusted Cash Flow is a non-GAAP financial measure. We believe that the presentation of Adjusted Cash Flow is relevant and useful to our investors because it provides information on activities we consider normal operations of our business, regardless of financing source and level of financing for our equipment inventory. The following table reconciles net cash provided by operating activities, a GAAP measure, to adjusted cash flow provided by operating activities and net cash used for financing activities, a GAAP measure, to adjusted cash flow used for financing activities.
 
 Net Cash Provided by (Used for) Operating Activities
 
Net Cash Provided by (Used for) Financing Activities
 
Year Ended January 31,
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
2019
 
2018
 
2017
 
 (in thousands)
 
 (in thousands)
Cash Flow, As Reported
$
46,605

 
$
95,812

 
$
140,997

 
$
(16,727
)
 
$
(71,466
)
 
$
(167,976
)
Adjustment for Non-Manufacturer Floorplan Net Payments
16,818

 
(38,626
)
 
(116,558
)
 
(16,818
)
 
38,626

 
116,558

Adjustment for Constant Equity in Equipment Inventory
(16,030
)
 
(11,603
)
 
64,400

 

 

 

Adjusted Cash Flow
$
47,393

 
$
45,583

 
$
88,839

 
$
(33,545
)
 
$
(32,840
)
 
$
(51,418
)
Certain Information Concerning Off-Balance Sheet Arrangements
As of January 31, 2019, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. We are, therefore, not exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in these relationships. In the normal course of our business activities, we lease real estate, vehicles and equipment under operating leases.
Contractual and Commercial Commitment Summary
Our contractual obligations and commercial commitments as of January 31, 2019 are summarized below:
 
 
 
 
Payments Due By Period
Contractual Obligations
 
Total
 
Less Than
1 Year
 
1 to 3 Years
 
3 to 5 Years
 
More Than
5 Years
 
 
(in thousands)
Long-term debt obligations (1)
 
$
44,782

 
$
6,211

 
$
11,427

 
$
8,070

 
$
19,074

Senior convertible note obligations (2)
 
46,065

 
46,065

 

 

 

Operating lease (3)
 
158,566

 
20,117

 
36,780

 
33,260

 
68,409

Purchase obligations (4)
 
5,317

 
1,849

 
2,941

 
527

 

Total
 
$
254,730

 
$
74,242

 
$
51,148

 
$
41,857

 
$
87,483

(1)
Includes obligations under our capital lease and financing obligations, long-term debt obligations and estimates of interest payable under all such obligations.
(2)
Includes coupon payments of interest on the contractual payment dates and payment of the principal balance on maturity in May 2019.
(3)
Includes minimum lease payment obligations under operating leases. Amounts do not include insurance or real estate taxes, which we include in our operating expenses and which we estimate will be approximately $2.7 million for the less than 1 year period, $5.2 million for the 1 to 3 year period, $5.1 million for the 3 to 5 year period, and $8.2 million for the more than 5 years period for a total of approximately $21.3 million. See Note 15 to our consolidated financial statements for a description of our operating lease obligations.
(4)
Primarily represents contracts related to information technology systems.

44

Table of Contents

Information Regarding Forward-Looking Statements
The Private Securities Litigation Reform Act of 1995 provides a "safe harbor" for forward-looking statements. We include "forward-looking" information in this Form 10-K, including this Item 7, as well as in other materials filed or to be filed by us with the Securities and Exchange Commission (as well as information included in oral statements or other written statements made or to be made by us).
This Form 10-K contains forward-looking statements that involve risks and uncertainties. In some cases, you can identify forward-looking statements by the following words: "anticipate," "believe," "continue," "could," "estimate," "expect," "intend," "may," "ongoing," "plan," "potential," "predict," "project," "should," "will," "would," or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words. These statements involve known and unknown risks, uncertainties and other factors that may cause our or our industry's actual results, levels of activity, performance or achievements to be materially different from the information expressed or implied by these forward-looking statements. Forward-looking statements are only predictions and are not guarantees of performance. These statements are based on our management's beliefs and assumptions, which in turn are based on currently available information. Our forward-looking statements in this Form 10-K generally relate to the following:
our beliefs and intentions with respect to our growth strategy, including growth through acquisitions, the profitability of acquisitions, the types of acquisition targets we intend to pursue, the availability of suitable acquisition targets, our ability to identify such targets, the industry climate for dealer consolidation, and our ability to implement our growth strategy;
our beliefs with respect to factors that will affect demand and seasonality of purchasing in the agricultural and construction industries;
our beliefs with respect to our primary supplier (CNH Industrial) of equipment and parts inventory;
our beliefs with respect to the equipment market, our competitors and our competitive advantages;
our beliefs with respect to the impact of government subsidies on the agriculture economy;
our beliefs with respect to the impact of natural resource exploration and related commodity prices in our operating region on our operating results;
our beliefs with respect to the impact of government regulations;
our beliefs with respect to continued operations in the event of information systems inoperability;
our beliefs with respect to our business strengths, including the Titan Operating Model, the diversity of our customer base, and the growth rate of our shared resources expenditures and our marketing efforts;
our plans and beliefs with respect to real property used in our business;
our plans and beliefs regarding future sales, sales mix, and marketing activities;
our beliefs and assumptions regarding the payment of dividends and repatriation of earnings from foreign operations;
our beliefs and assumptions regarding valuation reserves, equipment inventory balances, fixed operating expenses, and absorption rate;
our beliefs and expectations regarding our restructuring activities including the amount and recognition of related costs;
our beliefs and expectations regarding the effects of the political climate and economy in Ukraine;
our beliefs and assumptions with respect to our rental equipment operations;
our beliefs with respect to our employee relations and the impact of employee training and management strength on our revenues;
our assumptions, beliefs and expectations with respect to past and future market conditions, including interest rates, and public infrastructure spending, new environmental standards, and the impact these conditions will have on our operating results;
our beliefs with respect to the impact of our credit agreements, including future interest expense, limits on corporate transactions, financial covenant compliance, and ability to negotiate amendments or waivers;
our beliefs with respect to the impact of increase or decrease in applicable foreign exchange rates;

45

Table of Contents

our beliefs with respect to the adequacy of our capital resources and the funding of debt service obligations and capital expenditures;
our plans and assumptions for future capital expenditures;
our cash needs, sources of liquidity, and the adequacy of our working capital; and
our expectations regarding the impact of inflation.
Forward-looking statements are only predictions and are not guarantees of performance. These statements are based on our management's beliefs and assumptions, which in turn are based on currently available information. Important assumptions relating to the forward-looking statements include, among others, assumptions regarding demand for our products, the expansion of product offerings geographically, the timing and cost of planned capital expenditures, competitive conditions and general economic conditions. These assumptions could prove inaccurate. Forward-looking statements also involve known and unknown risks and uncertainties, which could cause actual results that differ materially from those contained in any forward-looking statement. Many of these factors are beyond our ability to control or predict. Such factors include, but are not limited to, the following:
incorrect assumptions regarding our cash needs;
general economic conditions and construction activity in the markets where we operate;
our relationships with equipment suppliers;
our leverage;
the risks associated with the expansion of our business;
the potential inability to integrate any businesses we acquire;
competitive pressures;
compliance with laws and regulations; and
other factors discussed under "Risk Factors" or elsewhere in this Form 10-K.
You should read the risk factors and the other cautionary statements made in this Form 10-K as being applicable to all related forward-looking statements wherever they appear in this Form 10-K. We cannot assure you that the forward-looking statements in this Form 10-K will prove to be accurate. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans in any specified timeframe, if at all. Other than as required by law, we undertake no obligation to update these forward-looking statements, even though our situation may change in the future.

46

Table of Contents

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to various market risks, including changes in interest rates and foreign currency exchange rates. Market risk is the potential loss arising from adverse changes in market rates and prices such as interest rates and foreign currency exchange rates.
Interest Rate Risk
Exposure to changes in interest rates results from borrowing activities used to fund operations. For fixed rate debt, interest rate changes affect the fair value of financial instruments but do not impact earnings or cash flows. Conversely, for floating rate debt, interest rate changes generally do not affect the fair market value but do impact future earnings and cash flows, assuming other factors are held constant. We have both fixed and floating rate financing. Some of our floating rate credit facilities contain minimum rates of interest to be charged. Based upon our interest-bearing balances and interest rates as of January 31, 2019, holding other variables constant, a one percentage point increase in interest rates for the next 12-month period would decrease pre-tax earnings and cash flow by approximately $1.2 million. Conversely, a one percentage point decrease in interest rates for the next 12-month period would result in an increase to pre-tax earnings and cash flow of approximately $1.2 million. At January 31, 2019, we had total floorplan payables of $273.8 million, of which $122.1 million was interest-bearing at variable interest rates and $151.7 million was non-interest bearing. In addition, at January 31, 2019, we had total long-term debt, including our Senior Convertible Notes, of $74.4 million, all of which was fixed rate debt.
Foreign Currency Exchange Rate Risk
Our foreign currency exposures arise as the result of our foreign operations. We are exposed to transactional foreign currency exchange rate risk through our foreign entities’ holding assets and liabilities denominated in currencies other than their functional currency. In addition, the Company is exposed to foreign currency transaction risk as a result of certain intercompany financing transactions. The Company attempts to manage its transactional foreign currency exchange rate risk through the use of derivative financial instruments, primarily foreign exchange forward contracts, or through natural hedging instruments. Based upon balances and exchange rates as of January 31, 2019, holding other variables constant, we believe that a hypothetical 10% increase or decrease in all applicable foreign exchange rates would not have a material impact on our results of operations or cash flows. As of January 31, 2019, our Ukrainian subsidiary had $3.0 million of net monetary assets denominated in Ukrainian hryvnia (UAH). We have attempted to minimize our net monetary asset position through reducing overall asset levels in Ukraine and through borrowing in UAH which serves as a natural hedging instrument offsetting our net UAH denominated assets. At certain times, currency and payment controls imposed by the National Bank of Ukraine have limited our ability to manage our net monetary asset position. While the UAH remained relatively stable in fiscal 2019, an escalation of political tensions or economic instability could lead to significant UAH devaluations, which could have a material impact on our results of operations and cash flows.
In addition to transactional foreign currency exchange rate risk, we are also exposed to translational foreign currency exchange rate risk as we translate the results of operations and assets and liabilities of our foreign operations from their functional currency to the U.S. dollar. As a result, our results of operations, cash flows and net investment in our foreign operations may be adversely impacted by fluctuating foreign currency exchange rates. We believe that a hypothetical 10% increase or decrease in all applicable foreign exchange rates, holding all other variables constant, would not have a material impact on our results of operations or cash flows.

47

Table of Contents

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The Consolidated Balance Sheets of the Company as of January 31, 2019 and 2018, and the related Consolidated Statements of Operations, Comprehensive Income (Loss), Stockholders' Equity, and Cash Flows for the years ended January 31, 2019, 2018 and 2017, and the notes thereto, have been audited by Deloitte & Touche LLP, an independent registered public accounting firm.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
 
Page
Titan Machinery Inc.—Financial Statements
 
Audited Consolidated Financial Statements
 
Report of Independent Registered Public Accounting Firm
Report of Independent Registered Public Accounting Firm
Consolidated Balance Sheets as of January 31, 2019 and 2018
Consolidated Statements of Operations for the fiscal years ended January 31, 2019, 2018 and 2017
Consolidated Statements of Comprehensive Income (Loss) for the fiscal years ended January 31, 2019, 2018 and 2017
Consolidated Statements of Stockholders' Equity for the fiscal years ended January 31, 2019, 2018 and 2017
Consolidated Statements of Cash Flows for the fiscal years ended January 31, 2019, 2018 and 2017
Notes to Consolidated Financial Statements

48

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of
Titan Machinery Inc.
West Fargo, North Dakota

Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Titan Machinery Inc. and subsidiaries (the “Company”) as of January 31, 2019 and 2018, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the three years in the period ended January 31, 2019, and the related notes and the schedule listed in the Index at Item 15 (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of January 31, 2019 and 2018, and the results of its operations and its cash flows for each of the three years in the period ended January 31, 2019, in conformity with accounting principles generally accepted in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of January 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated April 5, 2019, expressed an unqualified opinion on the Company’s internal control over financial reporting.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

DELOITTE & TOUCHE LLP
Minneapolis, Minnesota
April 5, 2019
We have served as the Company's auditor since 2013.


49

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of
Titan Machinery Inc.
West Fargo, North Dakota

Opinion on Internal Control over Financial Reporting
We have audited the internal control over financial reporting of Titan Machinery Inc. and subsidiaries (the "Company") as of January 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of January 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements and financial statement schedule as of and for the fiscal year ended January 31, 2019, of the Company and our report dated April 5, 2019, expressed an unqualified opinion on those consolidated financial statements and financial statement schedule.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

DELOITTE & TOUCHE LLP
Minneapolis, Minnesota
April 5, 2019

50

Table of Contents

TITAN MACHINERY INC.
CONSOLIDATED BALANCE SHEETS
AS OF JANUARY 31, 2019 AND 2018
(in thousands, except per share data)
 
January 31, 2019
 
January 31, 2018
Assets
 
 
 
Current Assets
 
 
 
Cash
$
56,745

 
$
53,396

Receivables, net of allowance for doubtful accounts
77,500

 
60,672

Inventories
491,091

 
472,467

Prepaid expenses and other
15,556

 
12,611

Total current assets
640,892

 
599,146

Noncurrent Assets
 
 
 
Property and equipment, net of accumulated depreciation
138,950

 
151,047

Deferred income taxes
3,010

 
3,472

Goodwill
1,161

 
250

Intangible assets, net of accumulated amortization
7,247

 
5,193

Other
1,178

 
1,200

Total noncurrent assets
151,546

 
161,162

Total Assets
$
792,438

 
$
760,308

 
 
 
 
Liabilities and Stockholders' Equity
 
 
 
Current Liabilities
 
 
 
Accounts payable
$
16,607

 
$
15,136

Floorplan payable
273,756

 
247,392

Senior convertible notes
45,249

 

Current maturities of long-term debt
3,340

 
1,574

Deferred revenue
46,409

 
32,324

Accrued expenses and other
35,091

 
31,863

Total current liabilities
420,452

 
328,289

Long-Term Liabilities
 
 
 
Senior convertible notes

 
62,819

Long-term debt, less current maturities
25,812

 
34,578

Deferred income taxes
4,955

 
2,275

Other long-term liabilities
5,908

 
10,492

Total long-term liabilities
36,675

 
110,164

Commitments and Contingencies (Notes 14 and 15)

 

Stockholders' Equity
 
 
 
Common stock, par value $0.00001 per share, 45,000 shares authorized; 22,218 shares issued and outstanding at January 31, 2019; 22,102 shares issued and outstanding at January 31, 2018

 

Additional paid-in-capital
248,423

 
246,509

Retained earnings
89,228

 
77,046

Accumulated other comprehensive loss
(2,340
)
 
(1,700
)
Total stockholders' equity
335,311

 
321,855

Total Liabilities and Stockholders' Equity
$
792,438

 
$
760,308

See Notes to Consolidated Financial Statements

51

Table of Contents

TITAN MACHINERY INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
YEARS ENDED JANUARY 31, 2019, 2018 AND 2017
(in thousands, except per share data)
 
2019
 
2018

2017
Revenue
 
 
 
 
 
Equipment
$
909,178

 
$
844,768

 
$
838,037

Parts
210,796

 
203,231

 
214,103

Service
86,840

 
88,794

 
94,408

Rental and other
54,691

 
55,813

 
55,149

Total Revenue
1,261,505

 
1,192,606

 
1,201,697

Cost of Revenue
 
 
 
 
 
Equipment
812,467

 
764,649

 
769,924

Parts
149,615

 
143,729

 
149,212

Service
29,036

 
30,679

 
31,490

Rental and other
38,799

 
38,249

 
37,342

Total Cost of Revenue
1,029,917

 
977,306

 
987,968

Gross Profit
231,588

 
215,300

 
213,729

Operating Expenses
201,537

 
203,203

 
211,372

Impairment of Long-Lived Assets
2,156

 
673

 
4,410

Restructuring Costs
414

 
10,499

 
319

Income (Loss) from Operations
27,481

 
925

 
(2,372
)
Other Income (Expense)
 
 
 
 
 
Interest income and other income (expense)
2,547

 
1,635

 
1,524

Floorplan interest expense
(6,114
)
 
(8,152
)
 
(13,560
)
Other interest expense
(7,760
)
 
(8,847
)
 
(8,305
)
Income (Loss) Before Income Taxes
16,154

 
(14,439
)
 
(22,713
)
Provision for (Benefit from) Income Taxes
3,972

 
(7,390
)
 
(8,178
)
Net Income (Loss) Including Noncontrolling Interest
12,182

 
(7,049
)
 
(14,535
)
Less: Net Loss Attributable to Noncontrolling Interest

 

 
356

Net Income (Loss) Attributable to Titan Machinery Inc.
12,182

 
(7,049
)
 
(14,179
)
 
 
 
 
 
 
Earnings (Loss) per Share:
 
 
 
 
 
Basic
$
0.55

 
$
(0.32
)
 
$
(0.65
)
Diluted
$
0.55

 
$
(0.32
)
 
$
(0.65
)
 
 
 
 
 
 
Weighted Average Common Shares:
 
 
 
 
 
Basic
21,809

 
21,543

 
21,294

Diluted
21,816

 
21,543

 
21,294

See Notes to Consolidated Financial Statements

52

Table of Contents

TITAN MACHINERY INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
YEARS ENDED JANUARY 31, 2019, 2018 AND 2017
(in thousands)
 
2019
 
2018
 
2017
Net Income (Loss) Including Noncontrolling Interest
$
12,182

 
$
(7,049
)
 
$
(14,535
)
Other Comprehensive Income (Loss)
 
 
 
 
 
Foreign currency translation adjustments
(640
)
 
2,399

 
(1,090
)
Cash flow hedging instruments, net of tax

 
684

 
988

Total Other Comprehensive Income (Loss)
(640
)
 
3,083

 
(102
)
Comprehensive Income (Loss)
11,542

 
(3,966
)
 
(14,637
)
Comprehensive Loss Attributable to Noncontrolling Interest

 

 
(333
)
Comprehensive Income (Loss) Attributable To Titan Machinery Inc.
$
11,542

 
$
(3,966
)
 
$
(14,304
)
See Notes to Consolidated Financial Statements

53

Table of Contents

TITAN MACHINERY INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
YEARS ENDED JANUARY 31, 2019, 2018 AND 2017
(in thousands)
 
Common Stock
 
Additional Paid-In Capital
 
Retained Earnings
 
Accumulated Other Comprehensive Income (Loss)
 
Total Titan Machinery Inc. Stockholders' Equity
 
Non
controlling Interest
 
Total Stockholders' Equity
 
Shares Outstanding
 
Amount
 
 
 
 
 
 
BALANCE, JANUARY 31, 2016
21,604

 
$

 
$
242,491

 
$
99,526

 
$
(4,461
)
 
$
337,556

 
$
793

 
$
338,349

Common stock issued on grant of restricted stock and exercise of stock options, net of restricted stock forfeitures and restricted stock withheld for employee withholding tax
232

 

 
(355
)
 

 

 
(355
)
 

 
(355
)
Stock-based compensation expense

 

 
2,145

 

 

 
2,145

 

 
2,145

Acquisition of non-controlling interest

 

 
(3,666
)
 

 
(197
)
 
(3,863
)
 
(460
)
 
(4,323
)
Net loss

 

 

 
(14,179
)
 

 
(14,179
)
 
(356
)
 
(14,535
)
Other comprehensive loss

 

 

 

 
(125
)
 
(125
)
 
23

 
(102
)
BALANCE, JANUARY 31, 2017
21,836

 

 
240,615

 
85,347

 
(4,783
)
 
321,179

 

 
321,179

ASU 2016-09 cumulative effect adjustment

 

 
2,087

 
(1,252
)
 

 
835

 

 
835

Common stock issued on grant of restricted stock and exercise of stock options, net of restricted stock forfeitures and restricted stock withheld for employee withholding tax
266

 

 
989

 

 

 
989

 

 
989

Stock-based compensation expense

 

 
3,441

 

 

 
3,441

 

 
3,441

Repurchase of senior convertible notes

 

 
(623
)
 

 

 
(623
)
 

 
(623
)
Net loss

 

 

 
(7,049
)
 

 
(7,049
)
 

 
(7,049
)
Other comprehensive income

 

 

 

 
3,083

 
3,083

 

 
3,083

BALANCE, JANUARY 31, 2018
22,102

 

 
246,509

 
77,046

 
(1,700
)
 
321,855

 

 
321,855

Common stock issued on grant of restricted stock and exercise of stock options, net of restricted stock forfeitures and restricted stock withheld for employee withholding tax
116

 

 
(621
)
 

 

 
(621
)
 

 
(621
)
Stock-based compensation expense

 

 
2,535

 

 

 
2,535

 

 
2,535

Net income

 

 

 
12,182

 

 
12,182

 

 
12,182

Other comprehensive loss

 

 

 

 
(640
)
 
(640
)
 

 
(640
)
BALANCE, JANUARY 31, 2019
22,218

 
$

 
$
248,423

 
$
89,228

 
$
(2,340
)
 
$
335,311

 
$

 
$
335,311

See Notes to Consolidated Financial Statements

54

Table of Contents

TITAN MACHINERY INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
YEARS ENDED JANUARY 31, 2019, 2018 AND 2017
(in thousands)
 
2019
 
2018
 
2017
Operating Activities
 
 
 
 
 
Net income (loss) including noncontrolling interest
$
12,182

 
$
(7,049
)
 
$
(14,535
)
Adjustments to reconcile net income (loss) including noncontrolling interest to net cash provided by operating activities
 
 
 
 
 
Depreciation and amortization
23,605

 
25,105

 
26,868

Impairment
2,156

 
673

 
4,410

Deferred income taxes
2,511

 
(8,920
)
 
(2,841
)
Stock-based compensation expense
2,535

 
3,441

 
2,145

Noncash interest expense
2,432

 
3,651

 
5,314

Loss (gain) on repurchase of senior convertible notes
615

 
(22
)
 
(3,130
)
Other, net
995

 
(2,406
)
 
(925
)
Changes in assets and liabilities
 
 
 
 
 
Receivables, prepaid expenses and other assets
(13,475
)
 
(1,002
)
 
(1,885
)
Inventories
4,996

 
20,338

 
211,793

Manufacturer floorplan payable
(2,635
)
 
46,141

 
(95,341
)
Accounts payable, deferred revenue, accrued expenses and other and other long-term liabilities
10,688

 
15,862

 
9,124

Net Cash Provided by Operating Activities
46,605

 
95,812

 
140,997

Investing Activities
 
 
 
 
 
Rental fleet purchases
(5,665
)
 
(12,578
)
 
(3,137
)
Property and equipment purchases (excluding rental fleet)
(6,286
)
 
(13,537
)
 
(9,288
)
Proceeds from sale of property and equipment
1,549

 
5,030

 
2,388

Acquisition consideration, net of cash acquired
(15,299
)
 
(3,652
)
 

Proceeds from insurance recoveries

 

 
1,431

Other, net
(131
)
 
148

 
(519
)
Net Cash Used for Investing Activities
(25,832
)
 
(24,589
)
 
(9,125
)
Financing Activities
 
 
 
 
 
Net change in non-manufacturer floorplan payable
16,818

 
(38,626
)
 
(116,558
)
Repurchase of senior convertible notes
(20,025
)
 
(29,093
)
 
(46,013
)
Proceeds from long-term debt borrowings
3,252

 
33,001

 
14,009

Principal payments on long-term debt
(16,116
)
 
(36,786
)
 
(17,199
)
Loan provided to non-controlling interest holder

 

 
(2,148
)
Other, net
(656
)
 
38

 
(67
)
Net Cash Used for Financing Activities
(16,727
)
 
(71,466
)
 
(167,976
)
Effect of Exchange Rate Changes on Cash
(697
)
 
488

 
(210
)
Net Change in Cash
3,349

 
245

 
(36,314
)
Cash at Beginning of Period
53,396

 
53,151

 
89,465

Cash at End of Period
$
56,745

 
$
53,396

 
$
53,151

Supplemental Disclosures of Cash Flow Information
 
 
 
 
 
Cash paid (received) during the period
 
 
 
 
 
Income taxes, net of refunds
$
3,681

 
$
(5,555
)
 
$
(13,086
)
Interest
$
11,064

 
$
13,634

 
$
20,782

Supplemental Disclosures of Noncash Investing and Financing Activities
 
 
 
 
 
Net property and equipment financed with long-term debt, capital leases, accounts payable and accrued liabilities
$
5,230

 
$
752

 
$
2,496

Business combination assets acquired through direct financing
$

 
$
871

 
$

Net transfer of assets from property and equipment to inventories
$
5,263

 
$
3,609

 
$
7,454

Acquisition of non-controlling interest through satisfaction of outstanding receivables
$

 
$

 
$
4,324

See Notes to Consolidated Financial Statements

55

Table of Contents

TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
NOTE 1 - BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES
Nature of Business
Titan Machinery Inc. and its subsidiaries (collectively, the "Company") are engaged in the retail sale, service and rental of agricultural and construction machinery through its stores in the United States and Europe. The Company's North American stores are located in Arizona, Colorado, Iowa, Minnesota, Montana, Nebraska, New Mexico, North Dakota, South Dakota, Wisconsin and Wyoming, and its European stores are located in Bulgaria, Germany, Romania, Serbia and Ukraine.
Seasonality
The agricultural and construction equipment businesses are highly seasonal, which causes the Company's quarterly results and cash flows to fluctuate during the year. The Company's customers generally purchase and rent equipment in preparation for, or in conjunction with, their busy seasons, which for farmers are the spring planting and fall harvesting seasons, and for Construction customers is dependent on weather seasons in their respective regions, which is typically the second and third quarters of the Company's fiscal year for much of its Construction footprint. The Company's parts and service revenues are typically highest during its customers' busy seasons as well, due to the increased use of their equipment during this time, which generates the need for more parts and service work. However, weather conditions impact the timing of our customers' busy times, which may cause the Company's quarterly financial results to differ between fiscal years. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of funds from completed harvests and construction projects.
Principles of Consolidation
The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant accounts, transactions and profits between the consolidated companies have been eliminated in consolidation.
The Company's foreign subsidiaries have fiscal years ending on December 31 of each year, consistent with statutory reporting requirements in each of the respective countries. The accounts of the Company's foreign subsidiaries are consolidated as of December 31 of each year. See Note 27 - Subsequent Events for information regarding an acquisition in January 2019 which will be accounted for as a business combination in the Company's fiscal year ending January 31, 2020. No other events or transactions occurred related to these subsidiaries in January 2019 that would have materially affected the consolidated financial position, results of operations or cash flows.
In June 2016, the Company acquired all of the outstanding ownership interest held by the noncontrolling interest holder of the Company's Bulgarian subsidiary. Total consideration, which amounted to $4.3 million, was in the form of the satisfaction of outstanding receivables owed to the Company by the noncontrolling interest holder. Subsequent to this acquisition, all of the Company's subsidiaries are wholly-owned.
Reclassifications
Certain reclassifications of amounts previously reported have been made to the accompanying consolidated balance sheets and consolidated statements of cash flows to maintain consistency and comparability between periods presented. These reclassifications had no impact on previously reported total assets or liabilities within the consolidated balance sheet or cash flows from operating, investing or financing activities within the consolidated statement of cash flows.
Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates, particularly related to realization of inventory, impairment of long-lived assets, collectability of receivables, and income taxes.
Concentrations of Credit Risk
The Company's sales are to agricultural and construction equipment customers principally in the states and European countries in which its stores are located. The Company extends credit to its customers in the ordinary course of business and

56

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

monitors its customers' financial condition to minimize its risks associated with trade receivables; however, the Company does not generally require collateral on trade receivables.
The Company's cash balances are maintained in bank deposit accounts, which, at times, are in excess of federally insured limits.
Concentrations in Operations
The Company currently purchases new equipment, rental equipment and the related parts from a limited number of manufacturers. Although no change in suppliers is anticipated, the occurrence of such a change could cause a possible loss of sales and adversely affect operating results. The Company is the holder of authorized dealerships granted by CNH Industrial America, LLC and CNHI International SA (collectively referred to "CNH Industrial") whereby it has the right to act as an authorized dealer for the entity's equipment. The dealership authorizations and floorplan payable facilities can be canceled by the respective entity if the Company does not observe certain established guidelines and covenants.
In addition, the Company believes that the following factors related to concentrations in suppliers, and in particular CNH Industrial, have a significant impact on its operating results:
CNH Industrial's product offerings, reputation and market share
CNH Industrial's product prices and incentive and discount programs
Supply of inventory from CNH Industrial
CNH Industrial provides floorplan payable financing for the purchase of a substantial portion of the Company's inventory
CNH Industrial provides a significant percentage of the financing and lease financing used by the Company's customers to purchase CNH Industrial equipment from the Company
Revenue Recognition
Revenues are recognized when control of the promised goods or services is transferred to the customer, in an amount that reflects the consideration we expect to collect in exchange for those goods or services. Shipping and handling costs are recorded as cost of revenue. Sales, value added and other taxes collected from our customers concurrent with our revenue activities are excluded from revenue.
Equipment Revenue. Equipment revenue transactions include the sale of new and used agricultural and construction equipment. The Company satisfies its performance obligations and recognizes revenue at a point in time, primarily upon the delivery of the product. Once a product is delivered, the customer has physical possession of the asset, can direct the use of the asset, and has the significant risks and rewards of ownership of the asset. Equipment transactions often include both cash and noncash consideration. Cash consideration is paid directly by our customers or by third-party financial institutions financing our customer transactions. Noncash consideration is in the form of trade-in equipment assets. We assign a value to trade-in assets by estimating a future selling price, which we estimate based on relevant internal and third-party data, less a gross profit amount to be realized at the time the trade-in asset is sold and an estimate of any reconditioning work required to ready the asset for sale. Both cash and noncash consideration can be received prior to or after our performance obligation is satisfied. Any consideration received prior to the satisfaction of our performance obligation is recognized as deferred revenue. Receivables recognized for amounts not paid at the time our performance obligation is satisfied, including amounts due from third-party financial institutions, generally do not have established payment terms but are collected in relatively short time periods.
For certain equipment sale transactions, the Company provides a residual value guarantee to CNH Industrial Capital in connection with a customer leasing arrangement in which we sell the equipment to CNH Industrial Capital, who simultaneously executes a leasing arrangement with our end-user customer. The amount of revenue recognized for the sale of the equipment asset is reduced by, and we recognize a corresponding liability equal to, our estimate of the amount that is probable of being paid under the guarantee discounted at a rate of interest to reflect the risk inherent in the liability.
Also included in equipment revenue are net commissions earned for serving as the agent in facilitating sales of equipment assets we hold as consignee on behalf of the consignor, as well as net commissions earned for facilitating the sale of extended warranty protection plans provided by our suppliers or third-party insurance providers.

57

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

We have elected, as a practical expedient, to recognize sales commissions earned on the sale of equipment inventory as an expense when incurred because the amortization period of this cost if it was otherwise capitalized would be less than one year. These costs are recorded in operating expenses in our consolidated statements of operations.
Parts Revenue. We sell a broad range of maintenance and replacement parts for both equipment that we sell and other types of equipment. The Company satisfies its performance obligation and recognizes revenue at a point in time, upon delivery of the product to the customer. Once a product is delivered, the Company has a present right to payment, the customer has physical possession of the asset, can direct the use of the asset, and has the significant risks and rewards of ownership of the asset. In many cases, customers tender payment at the time of delivery. Balances not paid at the time of delivery are typically due in full within 30 days. Most parts are sold with a thirty-day right of return or exchange. Historically, parts returns have not been material.
Parts revenue also includes the retail value of parts inventories consumed during the course of customer repair and maintenance services and services provided under manufacturer warranties. As further described below, we recognize revenue from these activities over time.
Service Revenue. We provide repair and maintenance services, including repairs performed under manufacturer warranties, for our customer’s equipment. We recognize service and associated parts revenue of our repair and maintenance services over time as we transfer control of these goods and services over time. The Company recognizes revenue over time in the amount to which we have the right to invoice the customer as such an amount corresponds to the value of our performance completed to date. Generally, the Company has the right to invoice the customer for labor hours incurred and parts inventories consumed during the performance of the service arrangement. Customer invoicing most often occurs at the conclusion of our repair and maintenance services. Accordingly, we recognize unbilled receivables for the amount of unbilled labor hours incurred and parts inventories consumed under our repair and maintenance arrangements. Upon customer invoicing, unbilled receivables are reclassified to receivables. In many cases, customers tender payment at the completion of our work and the creation of the invoice. Balances not paid at the time of invoicing are typically due in full within 30 days.
Other Revenue. Other revenues primarily consist of fees charged in connection with short-haul equipment delivery and pick-up services, in which revenue is recognized at a point in time when the service is completed, and Global Positioning System ("GPS") signal subscriptions, in which revenue is recognized on a straight-line basis over the subscription period.
Rental Revenue. We rent equipment to our customers on a short-term basis for periods ranging from a few days to a few months. Rental revenue is recognized on a straight-line basis over the period of the related rental agreement. Revenue from rental equipment delivery and pick-up services is recognized when the service is performed.
Manufacturer Incentives and Discounts
The Company receives various manufacturer incentives and discounts, which are based on a variety of factors. Discounts and incentives related to the purchase of inventory are recognized as a reduction of inventory prices and recognized as a reduction of cost of revenue when the related inventory is sold. Other incentives, reflecting reimbursement of qualifying expenses, are recognized as a reduction of the related expense when earned.
Receivables and Credit Policy
Trade accounts receivable due from customers are uncollateralized customer obligations due under normal trade terms requiring payment within 30 to 90 days from the invoice date. Balances unpaid after the due date based on trade terms are considered past due and begin to accrue interest. Payments of trade receivables are allocated to the specific invoices identified on the customer's remittance advice or, if unspecified, are applied to the earliest unpaid invoices. Trade accounts receivable due from manufacturers relate to discount programs, incentive programs and repair services performed on equipment with a remaining factory warranty. Trade accounts receivable due from finance companies primarily consist of contracts in transit with finance companies and balances due from credit card companies. These receivables do not generally have established payment terms but are collected in relatively short time periods. Unbilled receivables represent unbilled labor hours incurred and parts inventories consumed during the performance of service arrangements for our customers at their retail rates.
The carrying amount of trade receivables is reduced by a valuation allowance that reflects management's best estimate of the amounts that will not be collected. Management reviews aged receivable balances and estimates the portion, if any, of the balance that will not be collected. Account balances are charged off after all appropriate means of collection have been exhausted and the potential for recovery is considered remote.

58

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Inventories
New and used equipment are stated at the lower of cost (specific identification) or net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. All new and used equipment inventories, including that which has been rented, are subject to periodic lower of cost or net realizable value evaluation that considers various factors including aging of equipment and market conditions. Equipment inventory values are adjusted whenever the carrying amount exceeds the net realizable value. Parts inventories are valued at the lower of average cost or net realizable value. The Company estimates its lower of cost or net realizable value adjustments on its parts inventories based on various factors including aging and sales of each type of parts inventory. Work in process represents costs incurred in the reconditioning and preparation for sale of our equipment inventories.
Property and Equipment
Property and equipment is carried at cost less accumulated depreciation and amortization. Depreciation and amortization are computed on a straight-line basis over the estimated useful life of each asset, as summarized below:
Buildings and leasehold improvements
Lesser of 10 - 40 years or lease term
Machinery and equipment
3 - 10 years
Furniture and fixtures
3 - 10 years
Vehicles
5 - 10 years
Rental fleet
3 - 10 years
Depreciation for income tax reporting purposes is computed using accelerated methods.
Lessor Accounting
The Company leases equipment from its rental fleet and equipment inventory to customers on operating leases over periods primarily less than one year. These leases require a minimum rental payment and contingent rental payment based on machine hours. Rental revenue totaled $50.7 million, $51.6 million and $50.5 million for the years ended January 31, 2019, 2018 and 2017. As of January 31, 2019, the Company had $111.2 million of rental fleet included in property and equipment and accumulated depreciation of $50.4 million. As of January 31, 2018, the Company had $123.4 million of rental fleet included in property and equipment and accumulated depreciation of $51.6 million.
Goodwill
Goodwill is recognized and initially measured as any excess of the acquisition-date consideration transferred in a business combination over the acquisition-date amounts recognized for the net identifiable assets acquired. Goodwill is not amortized but is tested for impairment annually, or more frequently if an event occurs or circumstances change that would more likely than not result in an impairment of goodwill. Impairment testing is performed at the reporting unit level. A reporting unit is defined as an operating segment or one level below an operating segment, referred to as a component. A component of an operating segment is a reporting unit if the component constitutes a business for which discrete financial information is available and segment management regularly reviews the operating results of that component. After implementing new authoritative guidance regarding goodwill impairment on February 1, 2018, the goodwill impairment analysis is a single-step quantitative assessment that identifies both the existence of impairment and the amount of impairment loss by comparing the estimated fair value of a reporting unit to its carrying value, with any excess carrying value over the fair value being recognized as an impairment loss, limited to the total amount of goodwill allocated to that reporting unit (see the Recent Accounting Guidance section below for additional details regarding the amendment to goodwill impairment testing). The Company performs its annual goodwill impairment test as of December 31st of each year and has identified two reporting units that carry a goodwill balance.
Intangible Assets
Intangible assets with a finite life consist of customer relationships and covenants not to compete, and are carried at cost less accumulated amortization. The Company amortizes the cost of identified intangible assets on a straight-line basis over the expected period of benefit, which is generally three years for customer relationships and the contractual term for covenants not to compete, which range from five to ten years.

59

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Intangible assets with an indefinite life consist of distribution rights with manufacturers. Distribution rights are classified as an indefinite-lived intangible asset because the Company's distribution agreements continue indefinitely by their terms, or are routinely awarded or renewed without substantial cost or material modifications to the underlying agreements. Accordingly, the Company believes that its distribution rights intangible assets will contribute to its cash flows for an indefinite period, therefore the carrying amount of distribution rights is not amortized, but is tested for impairment annually, or more frequently upon the occurrence of certain events or when circumstances indicate that impairment may be present. The impairment test is a single-step assessment that identifies both the existence of impairment and the amount of impairment loss by comparing the estimated fair value of the asset to its carrying value, with any excess carrying value over the fair value being recognized as an impairment loss. The Company performs its annual impairment test as of December 31st of each year.
Impairment of Long-Lived Assets
The Company's long-lived assets consist of its intangible assets and property and equipment. These assets are reviewed for potential impairment when events or circumstances indicate that the carrying value may not be recoverable. Recoverability is measured by comparing the estimated future undiscounted cash flows of such assets to their carrying values. If the estimated undiscounted cash flows exceed the carrying value, the carrying value is considered recoverable and no impairment recognition is required. However, if the sum of the undiscounted cash flows is less than the carrying value of the asset, the second step of the impairment analysis must be performed to measure the amount of impairment, if any. The second step of the impairment analysis compares the estimated fair value of the long-lived asset to its carrying value and any amount by which the carrying value exceeds the fair value is recognized as an impairment charge.
When reviewing long-lived assets for impairment, we group long-lived assets with other assets and liabilities at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities. Long-lived assets deployed and used by individual store locations are reviewed for impairment at the individual store level. Other long-lived assets shared across stores within a segment or shared across segments are reviewed for impairment on a segment or consolidated level as appropriate.
During the year ended January 31, 2019, the Company determined that certain events or circumstances, including a current period operating loss combined with historical losses and anticipated future operating losses, within certain of its stores was an indication that the long-lived assets of these stores may not be recoverable. The aggregate carrying value of such assets totaled $4.8 million. In light of these circumstances, the Company performed step one of the long-lived asset impairment analysis for these assets and concluded that the carrying value was not recoverable. Accordingly, the Company performed step two of the impairment analysis and estimated the fair value of the assets using an income approach. The Company recognized total impairment charges of $2.2 million, of which $0.9 million related to the Agriculture segment, $1.1 million related to the Construction segment, and $0.2 million related to the International segment. All impairment charges recognized are included in the Impairment of Long-Lived Assets amount in the consolidated statements of operations.
We performed similar impairment analyses at the end of fiscal 2018 and 2017. The Company recognized impairment charges totaling $0.7 million on long-lived assets during the year ended January 31, 2018, of which $0.2 million related to the Agriculture segment and $0.5 million related to the Construction segment. The Company recognized impairment charges totaling $4.4 million on long-lived assets during the year ended January 31, 2017, of which $1.9 million related to the Agriculture segment, $2.2 million related to the Construction segment and $0.3 million related to the International segment.
Construction of Leased Assets and Sale-Leaseback Accounting
The Company from time to time performs construction projects on its store locations, which are recorded as property and equipment in the consolidated balance sheet during the construction period. Upon completion, these assets are either placed in service, at which point the depreciation of the asset commences, or are part of a sale-leaseback transaction with a third-party buyer/lessor. In certain other situations the Company enters into build-to-suit construction projects with third-party lessors. Under the applicable lease accounting rules, certain forms of lessee involvement in the construction of the leased asset deem the Company to be the owner of the leased asset during the construction period and requires capitalization of the lessor's total project costs on the consolidated balance sheet with the recognition of a corresponding financing obligation. Upon completion of a project for which the constructed assets are sold to a buyer/lessor or the completion of a capitalized build-to suit construction project, the Company performs a sale-leaseback analysis to determine if the asset and related financing obligation can be derecognized from the consolidated balance sheet. Certain provisions in a number of our lease agreements, primarily provisions regarding repurchase options, are deemed to be continuing involvement in the sold asset which precludes sale recognition. In such cases, the asset remains on the consolidated balance sheet under property and equipment and the proceeds received in the sale-leaseback transaction are recognized as a financing obligation under long-term debt in the consolidated balance sheet. Both the asset and the financing obligation are amortized over the lease term. In instances in which the Company

60

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

has no continuing involvement in the sold asset, the criteria for sale recognition are met and the asset and any related financing obligation are derecognized from the consolidated balance sheet, and the lease is analyzed for proper accounting treatment as either an operating or capital lease.
Exit and Disposal Costs
Costs related to exit or disposal activities, including store closures, for the Company primarily include lease termination costs, employee termination benefits and other costs associated with moving assets and vacating the stores. The Company records a liability at the net present value of the remaining lease obligations, net of estimated sublease income, as of the date the Company ceases using the property, including removal of any Company assets. Any subsequent adjustments to that liability as a result of changes in estimates are recorded in the period incurred. The Company records a liability for employee termination costs on the date when management, with appropriate approval, has a formal plan, the plan identifies the number of employees by function with the expected date of termination, benefits for the employees have been identified, the plan is unlikely to be changed and the termination benefits have been communicated to the employees. Other related costs are expensed as incurred.
Derivative Instruments
In the normal course of business, the Company is subject to risk from adverse fluctuations in foreign currency exchange rates and benchmark interest rates. The Company may manage its market risk exposures through a program that includes the use of derivative instruments, primarily foreign exchange forward contracts and interest rate derivatives. The Company's objective in managing its exposure to market risk is to minimize the impact on earnings, cash flows and the consolidated balance sheet. The Company does not use derivative instruments for trading or speculative purposes.
All outstanding derivative instruments are recognized in the consolidated balance sheet at fair value. The effect on earnings from recognizing the fair value of the derivative instrument depends on its intended use, the hedge designation, and the effectiveness in offsetting the exposure of the underlying hedged item. Changes in fair values of instruments designated to reduce or eliminate fluctuations in the fair values of recognized assets and liabilities and unrecognized firm commitments are reported currently in earnings along with the change in the fair value of the hedged items. Changes in the effective portion of the fair values of derivative instruments used to reduce or eliminate fluctuations in cash flows of forecasted transactions are reported in other comprehensive income (loss), a component of stockholders' equity. Amounts accumulated in other comprehensive income (loss) are reclassified to earnings when the related hedged items affect earnings or the anticipated transactions are no longer probable. Changes in the fair value of derivative instruments designated to reduce or eliminate fluctuations in the net investment of a foreign subsidiary are reported in other comprehensive income. Changes in the fair value of derivative instruments that are not designated as hedging instruments or do not qualify for hedge accounting treatment are reported currently in earnings. The cash flows related to derivative instruments that are accounted for as cash flow hedges are classified in the same category on the consolidated statements of cash flow as the cash flows from the items being hedged.
For derivative instruments accounted for as hedging instruments, the Company formally designates and documents, at inception, the instrument as a hedge of a specific underlying exposure, the risk management objective and the manner by which the effectiveness of the hedging instrument will be evaluated. At each reporting period after inception, the Company evaluates the hedging instrument's effectiveness in reducing or eliminating the underlying hedged exposure. Any hedge ineffectiveness is recognized in earnings immediately.
Income Taxes
The Company uses the asset and liability method to account for income taxes. Under this method, deferred tax assets and liabilities are recognized for the expected future tax consequences of differences between the carrying amounts of assets and liabilities and their respective tax bases. Deferred tax assets are reduced by a valuation allowance when it is more likely than not that a portion or all of the deferred tax assets will not be realized. Changes in valuation allowances are included in its provision for income taxes in the period of the change. Deferred tax assets and liabilities are netted by taxing jurisdiction and presented as either a net asset or liability position, as applicable, on the consolidated balance sheets.
The Company recognizes the financial statement benefit of income tax positions only if those positions are more likely than not of being sustained. Recognized income tax positions are measured as the largest amount that has a greater than 50% likelihood of being realized. Changes in the recognition or measurement of such positions are reflected in its provision for income taxes in the period of the change. The Company's policy is to recognize interest and penalties related to income tax matters within its provision for income taxes.


61

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Earnings (Loss) Per Share ("EPS")
The Company uses the two-class method to calculate basic and diluted EPS. Unvested restricted stock awards are considered participating securities because they entitle holders to non-forfeitable rights to dividends during the vesting term. Under the two-class method, earnings of the Company are allocated between common stockholders and these participating securities based on the weighted-average number of shares of common stock and participating securities outstanding during the relevant period.
Basic EPS is computed by dividing net income (loss) attributable to Titan Machinery Inc. common stockholders by the weighted-average number of shares of common stock outstanding during the relevant period. Diluted EPS is computed by dividing net income (loss) attributable to Titan Machinery Inc. common stockholders by the weighted-average number of shares of common stock outstanding after adjusting for potential dilution related to the conversion of all dilutive securities into common stock. All potentially dilutive securities were included in the computation of diluted EPS. All anti-dilutive securities were excluded from the computation of diluted EPS.
The following table sets forth the calculation of basic and diluted EPS:
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(in thousands, except per share data)
Numerator
 
 
 
 
 
Net income (loss) attributable to Titan Machinery Inc.
$
12,182

 
$
(7,049
)
 
$
(14,179
)
Allocation to participating securities
(202
)
 
141

 
243

Net income (loss) attributable to Titan Machinery Inc. common stockholders
$
11,980

 
$
(6,908
)
 
$
(13,936
)
Denominator
 
 
 
 
 
Basic weighted-average common shares outstanding
21,809

 
21,543

 
21,294

Plus: incremental shares from assumed vesting of restricted stock units
7

 

 

Diluted weighted-average common shares outstanding
21,816

 
21,543

 
21,294

 
 
 
 
 
 
Earnings (Loss) per Share:
 
 
 
 
 
Basic
$
0.55

 
$
(0.32
)
 
$
(0.65
)
Diluted
$
0.55

 
$
(0.32
)
 
$
(0.65
)
 
 
 
 
 
 
Anti-dilutive shares excluded from diluted weighted-average common shares outstanding:
 
 
 
 
 
Stock options and restricted stock units

 
95

 
144

Shares underlying senior convertible notes (conversion price of $43.17)
1,057

 
1,521

 
2,217

Advertising Costs
Costs incurred for producing and distributing advertising are expensed as incurred. Advertising expense amounted to $2.1 million, $2.2 million and $2.9 million for the years ended January 31, 2019, 2018 and 2017.
Stock-Based Compensation
The Company accounts for stock-based compensation at the fair value of the related equity instrument over the applicable service or performance period. Beginning on February 1, 2017 with the adoption of Accounting Standards Update ("ASU") 2016-09, Compensation-Stock Compensation, the Company recognizes forfeitures as they occur.
Comprehensive Income and Foreign Currency Matters
For the Company, comprehensive income (loss) represents net income adjusted for foreign currency translation adjustments and unrealized gains or losses on cash flow hedging derivative instruments. For its foreign subsidiaries in which their local currency is their functional currency, assets and liabilities are translated into U.S. dollars at the balance sheet date exchange rate. Income and expenses are translated at average exchange rates for the year. Foreign currency translation

62

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

adjustments are recorded directly as other comprehensive income (loss), a component of stockholders' equity. For its foreign subsidiaries in which the local currency is not the functional currency, prior to translation into U.S. dollars, amounts must first be remeasured from the local currency into the functional currency. Nonmonetary assets and liabilities are remeasured at historical exchange rates and monetary assets and liabilities are remeasured at the balance sheet date exchange rate. Income and expenses are remeasured at average exchange rates for the year. Foreign currency remeasurement adjustments are included in the statement of operations.
The Company recognized, in interest income and other income (expense) in its consolidated statements of operations, a net foreign currency transaction loss of $0.9 million and $0.7 million for the fiscal years ended January 31, 2019 and 2017 and a net foreign currency transaction gain of $1.2 million for the fiscal year ended January 31, 2018.
Business Combinations
The Company accounts for business combinations by allocating the purchase price amongst the assets acquired, including identifiable intangible assets, and liabilities assumed based on the fair values of the acquired assets and assumed liabilities. The acquisition accounting is finalized during the measurement period, which may not exceed one year from the date of acquisition. During the measurement period the Company's accounting for the business combination transaction may be based on estimates due to various unknown factors present at the date of acquisition.
Fair Value Measurements
Fair value is defined as the price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants. Three levels of inputs may be used to measure fair value:
Level 1—Values derived from unadjusted quoted prices in active markets for identical assets and liabilities.
Level 2—Values derived from observable inputs other than quoted prices that are observable for the asset or liability, either directly or indirectly, including quoted prices for similar assets or liabilities in active markets, or quoted prices for identical or similar assets in markets that are not active.
Level 3—Values derived from unobservable inputs for which there is little or no market data available, thereby requiring the reporting entity to develop its own assumptions.
In instances where the determination of the fair value measurement is based on inputs from different levels of the fair value hierarchy, the level in the fair value hierarchy within which the entire fair value measurement falls is based on the lowest level input that is significant to the fair value measurement in its entirety.
Segment Reporting
The Company operates its business in three reportable segments, the Agriculture, Construction and International segments.
Recent Accounting Guidance
Accounting guidance adopted
In July 2015, the Financial Accounting Standards Board (the "FASB") amended authoritative guidance on accounting for the measurement of inventory, codified in ASC 330, Inventory. The amended guidance requires inventory to be measured at the lower of cost and net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The Company adopted this guidance on a prospective basis on February 1, 2017. Under the former guidance for measuring inventory, the Company recognized lower of cost-or-market adjustments using a definition of market value as net realizable value reduced by an allowance for a normal profit margin. Upon implementation of the new authoritative guidance, market is defined solely as net realizable value. The adoption of this guidance did not have a material effect on the Company's consolidated financial statements.
In March 2016, the FASB amended authoritative guidance on stock-based compensation through the issuance of ASU 2016-09 which is codified in ASC 718, Compensation - Stock Compensation. The amended guidance changes the accounting for certain aspects of share-based payments, including the income tax consequences, forfeitures, classification of awards as either equity or liabilities, and classification on the statements of cash flows. The Company adopted this guidance on February 1, 2017. Under the new guidance, the Company elected to account for forfeitures of share based instruments as they occur, as compared to the previous guidance under which the Company estimated the number of forfeitures. The Company applied the

63

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

accounting change on a modified retrospective basis as a cumulative-effect adjustment to retained earnings as of February 1, 2017. The following table summarizes the impact to the Company’s consolidated balance sheet:
 
As of February 1, 2017
 
Balance Sheet Classification
 
Additional paid-in capital
 
Deferred income tax liability
 
Retained earnings
 
 
 
(in thousands)
 
 
 
 
 
Increase (Decrease)
 
 
Impact of cumulative-effect adjustment from adoption of ASU 2016-09
$
2,087

 
$
(835
)
 
$
(1,252
)
In January 2017, the FASB amended authoritative guidance on the subsequent accounting measurement of goodwill through the issuance of ASC 2017-04 which is codified in ASC 350, Intangibles-Goodwill and Other. The amended guidance simplified the goodwill impairment test by eliminating Step 2 of the test which required entities to estimate the implied fair value of goodwill of a reporting unit to determine the amount of impairment present. Under the new standard, goodwill impairment will be measured based on a single-step assessment and be equal to the amount by which a reporting unit's carrying value exceeds is fair value, not to exceed the carrying value of goodwill. The guidance is effective for the Company prospectively to impairment tests performed after January 31, 2020, with early adoption permitted. The Company elected to early adopt this guidance in the first quarter of fiscal 2019. The adoption of this guidance did not have a material effect on the Company's consolidated financial statements.
In May 2014, the FASB issued authoritative guidance on accounting for revenue recognition, codified in Accounting Standards Codification ("ASC") 606, Revenue from Contracts with Customers. This guidance is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The guidance also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract.
The Company adopted ASC 606 as of February 1, 2018 using the modified retrospective method of adoption. Results for reporting periods beginning after February 1, 2018 are presented under the guidelines of ASC 606, while prior period amounts have not been adjusted and continue to be reported under the accounting standards in effect for those periods. Upon adoption of ASC 606, the Company did not recognize a cumulative effect adjustment of initially applying the standard as no material adjustments to contracts not completed as of the date of adoption were identified. The adoption of ASC 606 did not materially impact the amount of revenue recognized or any other financial statement line item as of and for the year ended January 31, 2019. The Company has included the additional disclosures required under ASC 606 in Notes 1, 2, 3 and 8.
Accounting guidance not yet adopted    
In February 2016, the FASB amended authoritative guidance on leases, codified in ASC 842, Leases. The amended guidance requires lessees to recognize most leases on their balance sheets related to the rights and obligations created by those leases. The new standard also requires new disclosures to help financial statement users better understand the amount, timing, and uncertainty of cash flows arising from leases. The Company adopted the new standard on February 1, 2019 and elected the prospective transition method which allows for the recognition of any cumulative-effective adjustments to the opening balance of retained earnings in the period of adoption. Prior period amounts will not be adjusted and will continue to be reported under the accounting standards in effect for those periods. The Company elected the package of practical expedients afforded under the guidance. The package of practical expedients applies to leases that commenced prior to adoption of the new standard and permits an entity not to: 1) reassess whether existing or expired contracts are or contain a lease, 2) reassess the lease classification, and 3) reassess any initial direct costs for any existing leases. The Company did not elect the use of the hindsight practical expedient to determine the lease term, but rather used the lease term as defined under current leasing guidance to capitalize the right of use asset and lease liability upon adoption.
The Company is nearly complete with its implementation efforts, which has included various procedures performed to identify the Company's portfolio of lease agreements, implementation of a new leasing software to meet the reporting and disclosure requirements of the standard, and an evaluation of our lease-related processes and and internal controls. The Company has identified new and updated existing internal controls and processes to ensure compliance with the new standard, but such modifications were not deemed to be material to our overall system of internal controls.
This standard will have a material impact on our consolidated balance sheets due to the capitalization of a right-of-use asset and lease liability associated with our current operating leases in which we are the lessee, but it will not have a material

64

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

impact on our consolidated statements of operations or cash flows. The Company estimates adoption of the standard on February 1, 2019 will result in the recognition of operating lease right-of-use assets and operating lease liabilities of approximately $100.0 million and $110.0 million, respectively, with a cumulative effective adjustment to retained earnings as of February 1, 2019 of approximately $5.0 million resulting from right-of-use asset impairment present on the date of adoption. Our rental fleet and equipment inventory rental activities in which we are the lessor in the transaction are also subject to ASC 842. The standard will not have a material impact on our consolidated balance sheets, statements of operations or cash flows for our lessor transactions.
NOTE 2 - REVENUE
The following table presents our revenue disaggregated by revenue source and segment:
 
Year Ended January 31, 2019
 
Agriculture
 
Construction
 
International
 
Total
 
(in thousands)
Equipment
$
535,034

 
$
185,163

 
$
188,981

 
$
909,178

Parts
127,741

 
47,404

 
35,651

 
210,796

Service
58,823

 
23,267

 
4,750

 
86,840

Other
2,690

 
3,896

 
179

 
6,765

Revenue from contracts with customers
724,288

 
259,730

 
229,561

 
1,213,579

Rental
2,505

 
42,259

 
3,162

 
47,926

Total revenues
$
726,793

 
$
301,989

 
$
232,723

 
$
1,261,505

Unbilled receivables amounted to $11.2 million and $11.0 million as of January 31, 2019 and January 31, 2018. Deferred revenue from contracts with customers amounted to $44.9 million and $30.1 million as of January 31, 2019 and January 31, 2018. Our deferred revenue most often increases in the fourth quarter of each fiscal year due to a higher level of customer down payments or prepayments and longer time periods between customer payment and delivery of the equipment asset, and the related recognition of equipment revenue, prior to its seasonal use. The increase in deferred revenue from January 31, 2018 to January 31, 2019 was primarily due to increased equipment sales activity, including prepayments and trade-in activity on pending equipment sale transactions in the fourth quarter of fiscal 2019. During the year ended January 31, 2019, the Company recognized substantially all of the revenue that was included in the deferred revenue balance as of January 31, 2018.
No material amount of revenue was recognized during the year ended January 31, 2019 from performance obligations satisfied in previous periods. The Company has elected as a practical expedient to not disclose the value of unsatisfied performance obligations for (i) contracts with an original expected length of service of one year or less and (ii) contracts for which we recognize revenue at the amount to which we have the right to invoice for services performed. The contracts for which the practical expedient has been applied include (i) equipment revenue transactions, which do not have a stated contractual term, but are short-term in nature, and (ii) service revenue transactions, which also do not have a stated contractual term but are generally completed within 30 days and for such contracts we recognize revenue over time at the amount to which we have the right to invoice for services completed to date.

65

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 3 - RECEIVABLES
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
Trade and unbilled receivables from contracts with customers
 
 
 
Trade receivables due from customers
$
38,827

 
$
25,396

Trade receivables due from finance companies
10,265

 
8,906

Unbilled receivables
11,222

 
10,967

Trade and unbilled receivables from rental contracts
 
 
 
Trade receivables
6,386

 
7,571

Unbilled receivables
828

 
847

Other receivables
 
 
 
Due from manufacturers
12,950

 
8,805

Other
550

 
1,131

Total receivables
81,028

 
63,623

Less allowance for doubtful accounts
(3,528
)
 
(2,951
)
Receivables, net of allowance for doubtful accounts
$
77,500

 
$
60,672

The Company recognized impairment losses on receivables arising from sales contracts with customers for the year ended January 31, 2019 of $0.5 million. Impairment losses on receivables arising from rental contracts amounted to $0.3 million for the year ended January 31, 2019.
NOTE 4 - INVENTORIES
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
New equipment
$
258,081

 
$
258,559

Used equipment
158,951

 
141,450

Parts and attachments
72,760

 
71,110

Work in process
1,299

 
1,348

 
$
491,091

 
$
472,467

NOTE 5 - PROPERTY AND EQUIPMENT
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
Rental fleet equipment
$
111,164

 
$
123,430

Machinery and equipment
21,646

 
22,025

Vehicles
42,330

 
37,741

Furniture and fixtures
40,645

 
39,851

Land, buildings, and leasehold improvements
63,091

 
62,243

 
278,876

 
285,290

Less accumulated depreciation
(139,926
)
 
(134,243
)
 
$
138,950

 
$
151,047

Depreciation expense amounted to $23.6 million, $25.0 million and $26.7 million for the years ended January 31, 2019, 2018 and 2017. The Company had assets related to sale-leaseback financing obligations and capital leases associated with real estate of store locations, which are included in the land, buildings and leasehold improvements balance above. Such assets had gross carrying values totaling $25.2 million and $23.5 million, and accumulated amortization balances totaling $5.8 million and $4.7 million, as of January 31, 2019 and 2018.

66

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 6 - INTANGIBLE ASSETS AND GOODWILL
Definite-Lived Intangible Assets    
The following is a summary of definite-lived intangible assets as of January 31, 2019 and 2018:
 
January 31, 2019
 
January 31, 2018
 
Cost
 
Accumulated
Amortization
 
Net
 
Cost
 
Accumulated
Amortization
 
Net
 
(in thousands)
 
(in thousands)
Covenants not to compete
$
200

 
$
(138
)
 
$
62

 
$
440

 
$
(369
)
 
$
71

Customer relationships
112

 
(19
)
 
93

 

 

 

 
$
312

 
$
(157
)
 
$
155

 
$
440

 
$
(369
)
 
$
71

During the year ended January 31, 2019, the Company acquired, through a business combination, a customer relationship intangible asset in the amount of $0.1 million, which will be amortized over a three year period. Amortization expense was $0.1 million for each of the three years ended January 31, 2019, 2018 and 2017. As of January 31, 2019, future amortization expense is expected to be as follows:
Fiscal years ending January 31,
Amount
 
(in thousands)
2020
$
60

2021
48

2022
26

2023
8

2024
3

Thereafter
10

 
$
155

Indefinite-Lived Intangible Assets
The Company's indefinite-lived intangible assets consist of distribution rights assets. The following is a summary of distribution rights assets by segment as of January 31, 2019 and 2018:
 
January 31,
 
2019
 
2018
 
(in thousands)
Segment
 
 
 
Agriculture
$
5,050

 
$
5,050

Construction
237

 
72

International
1,805

 

 
$
7,092

 
$
5,122

During the years ended January 31, 2019 and 2018, the Company acquired, primarily through business combinations, distribution rights intangible assets in the amount of $2.0 million and $0.2 million. The results of the Company's annual distribution rights impairment tests for the fiscal years ended January 31, 2019, 2018 and 2017 indicated that no impairment existed as of the test date.





67

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Goodwill
Changes in the carrying amount of goodwill during the years ended January 31, 2019 and 2018 are as follows:
 
Agriculture
 
Construction
 
International
 
Total
 
(in thousands)
Balance, January 31, 2017
$

 
$

 
$

 
$

Arising from business combinations
250

 

 

 
250

Foreign currency translation

 

 

 

Balance, January 31, 2018
250

 

 

 
250

Arising from business combinations

 

 
924

 
924

Foreign currency translation

 

 
(13
)
 
(13
)
Balance, January 31, 2019
$
250

 
$

 
$
911

 
$
1,161

The results of the Company's annual goodwill impairment tests for the fiscal years ended January 31, 2019 and 2018 indicated that no goodwill impairment existed as of the test date.
NOTE 7 - FLOORPLAN PAYABLE/LINES OF CREDIT
Flooplan payable balances reflect amounts owed to manufacturers for equipment inventory purchases and amounts outstanding under our various floorplan line of credit facilities. In the consolidated statements of cash flows, the Company reports cash flows associated with manufacturer floorplan financing as operating cash flows and cash flows associated with non-manufacturer floorplan financing as financing cash flows.
As of January 31, 2019, the Company had floorplan lines of credit totaling $640.0 million, which is primarily comprised of three significant floorplan lines of credit: (i) a $400.0 million credit facility with CNH Industrial, (ii) a $140.0 million line of credit with a group of banks led by Wells Fargo Bank, National Association (“Wells Fargo”), and (iii) a $45.0 million credit facility with DLL Finance LLC (“DLL Finance”).
CNH Industrial Floorplan Payable Line of Credit
As of January 31, 2019, the Company had a $400.0 million credit facility with CNH Industrial, of which $310.0 million is available for domestic financing and $90.0 million is available for European financing.
    The domestic financing facility offers financing for new and used equipment inventories. Available borrowings under the credit facility are reduced by outstanding floorplan payable balances and other acquisition-related financing arrangements with CNH Industrial. The credit facility charges interest at rates equal to the prime rate plus 2.0% for the financing of new and used equipment inventories and at the prime rate plus 3.25% for the financing of rental fleet assets. CNH Industrial offers periods of reduced interest rates and interest-free periods. Repayment terms vary, but generally payments are made from sales proceeds or rental revenue generated from the related inventories or rental fleet assets. Balances outstanding with CNH Industrial are secured by the inventory or rental fleet purchased with the floorplan proceeds. The European financing facility offers financing for new equipment inventories. Available borrowings under the credit facility are reduced by outstanding floorplan payable balances. Amounts outstanding are generally due approximately 75 days after the date of invoice by CNH Industrial. Generally, no interest is charged on outstanding balances. Amounts outstanding are secured by the inventory purchased with the floorplan proceeds.
The CNH Industrial credit facility contains financial covenants that impose a maximum level of adjusted debt to tangible net worth of 3.50:1.00 and minimum fixed charge coverage ratio of 1.10:1.00. It also contains various restrictive covenants that require prior consent of CNH Industrial if the Company desires to engage in any acquisition of, consolidation or merger with, any other business entity in which the Company is not the surviving company; create subsidiaries; move any collateral outside of the U.S.; or sell, rent, lease or otherwise dispose or transfer any of the collateral, other than in the ordinary course of business. CNH Industrial’s consent is also required for the acquisition of any CNH Industrial dealership. In addition, the CNH Industrial credit facility restricts the Company's ability to incur any liens upon any substantial part of its assets. The credit facility automatically renews on August 31st of each year unless earlier terminated by either party. As of January 31, 2019, the Company was in compliance with the adjusted debt to tangible net worth and fixed charge coverage ratio financial covenants under this credit facility.

68

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

During the year ended January 31, 2019, the CNH Industrial credit facility was amended various times to, among other things, decrease the available borrowings under the credit facility, from a combined capacity of $450.0 million to the current combined capacity of $400 million, to reallocate borrowing capacity between our domestic and European businesses, to modify the maximum level of adjusted debt to tangible net worth from 3.00:1.00 to the current maximum of 3.50:1.00, and to exclude from the minimum fixed charge cover ratio the pending pay-off of our Senior Convertible Notes in May 2019.
Wells Fargo Credit Agreement - Floorplan Payable and Working Capital Lines of Credit
As of January 31, 2019, the Company had a second amended and restated credit agreement with Wells Fargo (the "Wells Fargo Credit Agreement"), which provides for a $140.0 million wholesale floorplan line of credit (the "Floorplan Payable Line") and a $60.0 million working capital line of credit (the "Working Capital Line"). The amount available for borrowing under the Floorplan Payable Line is reduced by amounts outstanding thereunder, borrowing base calculations and outstanding standby letters of credit. The Wells Fargo Credit Agreement has a variable interest rate on outstanding balances and has a 0.25% to 0.375% non-usage fee on the average monthly unused amount and requires monthly payments of accrued interest. The Company elects at the time of any advance to choose a Base Rate Loan or a LIBOR Rate Loan. The LIBOR Rate is for the duration of one-month, two-month, or three-month LIBOR rate at the time of the loan, as chosen by the Company. The Base Rate is the greatest of (a) the Federal Funds Rate plus 0.5%, (b) the one-month LIBOR Rate plus 1%, and (c) the prime rate of interest announced, from time to time, within Wells Fargo. The applicable margin rate is determined based on excess availability under the Wells Fargo Credit Agreement and ranges from 0.75% to 1.5% for Base Rate Loans and 1.75% to 2.50% for LIBOR Rate Loans.
The Wells Fargo Credit Agreement is secured by substantially all our assets and requires the Company to maintain a fixed charge coverage ratio of at least 1.10:1.00 if adjusted excess availability plus eligible cash collateral is less than 15% of the total amount of the credit facility. Based on our adjusted excess availability and cash collateral, we were not subject to the fixed charge coverage ratio as of January 31, 2019. The Wells Fargo Credit Agreement also includes various non-financial covenants, including, under certain conditions, restricting the Company’s ability to make certain cash payments, including for cash dividends and stock repurchases, restricting the Company’s ability to issue equity instruments, restricting the Company’s ability to complete acquisitions or divestitures, and limiting the Company's ability to incur new indebtedness. The provisions in the Wells Fargo Credit Agreement restricting the Company from making certain cash payments, including for cash dividends and stock repurchases, provide that no such payments may be made unless, (i) as of the date of such payment there is no default or event of default occurring and continuing, (ii) the amount remaining available to be borrowed by the Company under the Wells Fargo Credit Agreement is greater than twenty percent of the total borrowing capacity under the Wells Fargo Credit Agreement and (iii) the Company's fixed charge coverage ratio for the 12 month period most recently ended, on a pro-forma basis assuming that such proposed cash payment has been made, is at least 1.10 to 1.00. As of January 31, 2019, under these provisions of the Wells Fargo Credit Agreement, the Company had an unrestricted dividend availability of approximately $44.1 million.
The maturity date of the Wells Fargo Credit Agreement was contingent upon the results of a maturity test that was performed on February 1, 2019, a date that was three months prior to the scheduled maturity date of the Company's outstanding Senior Convertible Notes. Pursuant to this test, the maturity date for the Wells Fargo Credit Agreement would be October 28, 2020 so long as (i) the Company's fixed charge coverage ratio for the 12 month period ended December 31, 2018 was at least 1.10 to 1.00 and (ii) a liquidity test, requiring that the Company have unrestricted cash on hand plus excess borrowing availability under the Wells Fargo Credit Agreement (on a pro-forma basis reflecting the Company’s repayment in full of its outstanding Senior Convertible Notes) in an amount that is greater than 20% of maximum credit amount under the facility, was met on February 1, 2019. If both financial tests were not satisfied on February 1, 2019, the Wells Fargo Credit Agreement would immediately mature and all amounts outstanding would become immediately due and payable in full. The Company satisfied the maturity test requirements on February 1, 2019, and therefore the maturity date of the Wells Fargo Credit Agreement is October 28, 2020. The Company’s available borrowings under the Wells Fargo Credit Agreement are reduced by the amount of outstanding Senior Convertible Notes until the notes are repaid in full on May 1, 2019.
The Floorplan Payable Line is used to finance equipment inventory purchases. Amounts outstanding are recorded as floorplan payable, within current liabilities on the consolidated balance sheets, as the Company intends to repay amounts borrowed within one year.
The Working Capital Line is used to finance rental fleet equipment and for general working capital requirements of the Company. Amounts outstanding are recorded as long-term debt, within long-term liabilities on the consolidated balance sheets, as the Company does not have the intention or obligation to repay amounts borrowed within one year. The balances outstanding on the Working Capital Line as of January 31, 2019 and 2018 are disclosed in Note 11.

69

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

During the year ended January 31, 2019, the Wells Fargo Credit Agreement was amended various times to, among other things, modify the maturity testing date from November 1, 2018 to February 1, 2019, modify the maturity test calculation to those described above, modify certain limits to incur new indebtedness, provide for a one-time exception for lease obligations that will be recognized upon the adoption of the new leasing guidance effective for the Company on February 1, 2019, and to exclude from the minimum fixed charge cover ratio the pending pay-off of our Senior Convertible Notes in May 2019.
DLL Finance Floorplan Payable Line of Credit
As of January 31, 2019, the Company had a $45.0 million credit facility with DLL Finance, of which $36.5 million is available for domestic financing and $8.5 million is available for financing in certain of our European markets. The DLL Finance credit facility may be used to purchase or refinance new and used equipment inventory. Amounts outstanding for domestic financing bear interest on outstanding balances of three-month LIBOR plus an applicable margin of 3.00%. Amounts outstanding for European financing bear interest on outstanding balances of three-month EURIBOR plus an applicable margin of 2.10% to 2.50%. The credit facility allows for increase, decrease or termination of the facility by DLL Finance upon 90 days notice. The credit facility contains financial covenants that impose a maximum net leverage ratio of 3.50:1.00 and a minimum fixed charge coverage ratio of 1.10:1.00. The credit facility also requires the Company to obtain prior consent from DLL Finance if the Company desired to engage in any acquisition meeting certain financial thresholds. The balances outstanding with DLL Finance are secured by the inventory or rental fleet purchased with the floorplan proceeds. Repayment terms vary by individual notes, but generally payments are made from sales proceeds or rental revenue from the related inventories or rental fleet assets. As of January 31, 2019, the Company was in compliance with the net leverage ratio and fixed charge coverage ratio financial covenants under this credit facility.
During the year ended January 31, 2019, the DLL Finance credit facility was amended to, among other things, increase the available borrowing capacity from $30.0 million to the current level of $45.0 million, to decrease the interest rate margin from 3.50% to the current 3.00%, to modify the maximum net leverage ratio from 2.50:1.00 to the current maximum of 3.50:1.00, and to exclude from the minimum fixed charge coverage ratio the pending pay-off of our Senior Convertible Notes in May 2019.
Other Lines of Credit
The Company’s other lines of credit include various floorplan and working capital lines of credit primarily offered by non-manufacturer financing entities. Interest charged on outstanding borrowings are generally variable rates of interest most often based on LIBOR or EURIBOR and include interest margins primarily ranging from 1.50% to 6.00%. Outstanding balances are generally secured by inventory and other current assets. In most cases these lines of credit have a one-year maturity, with an annual review process to extend the maturity date for an additional one-year period. As of January 31, 2019, the Company had a compensating balance arrangement under one of its European floorplan credit facilities which requires a minimum cash deposit to be maintained with the lender in the amount of $5.0 million for the term of the credit facility.
Summary of Outstanding Amounts    
As of January 31, 2019 and 2018, the Company’s outstanding balance of floorplan payables and lines of credit consisted of the following:
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
CNH Industrial
$
120,319

 
$
116,177

Wells Fargo Floorplan Payable Line
49,100

 
57,500

DLL Finance
13,432

 
11,507

Other outstanding balances with manufacturers and non-manufacturers
90,905

 
62,208

 
$
273,756

 
$
247,392

As of January 31, 2019, the interest-bearing U.S floorplan payables carried various interest rates ranging from 4.77% to 6.30%, compared to a range of 4.06% and 6.50% as of January 31, 2018. As of January 31, 2019, foreign floorplan payables carried various interest rates primarily ranging from 0.94% to 8.51%, compared to a range of 0.92% to 7.58% as of January 31, 2018. As of January 31, 2019 and 2018, $151.7 million and $133.1 million of outstanding floorplan payables were non-interest bearing.

70

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 8 - DEFERRED REVENUE
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
Deferred revenue from contracts with customers
$
44,893

 
$
30,139

Deferred revenue from rental and other contracts
1,516

 
2,186

 
$
46,409

 
$
32,324

NOTE 9 - ACCRUED EXPENSES & OTHER
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
Compensation
$
19,661

 
$
16,413

Sales, payroll, real estate and value added taxes
4,698

 
4,448

Interest
905

 
1,148

Insurance
2,083

 
3,004

Income taxes payable
1,574

 
2,419

Lease residual value guarantees
2,089

 
215

Other
4,081

 
4,216

 
$
35,091

 
$
31,863

NOTE 10 - SENIOR CONVERTIBLE NOTES
On April 24, 2012, the Company issued through a private offering $150 million of 3.75% Senior Convertible Notes (the "Senior Convertible Notes"). The Senior Convertible Notes bear interest at a rate of 3.75% per year, payable semi-annually in arrears on May 1 and November 1 of each year, commencing on November 1, 2012. The Convertible Notes mature on May 1, 2019, unless earlier purchased by the Company, redeemed or converted.
The Senior Convertible Notes are unsecured and unsubordinated obligations; rank equal in right of payment to the Company's existing and future unsecured indebtedness that is not subordinated; are effectively subordinated in right of payment to the Company's existing and future secured indebtedness; and are structurally subordinated to all existing and future indebtedness and liabilities of the Company's subsidiaries.
The Senior Convertible Notes are initially convertible into the Company's common stock at a conversion rate of 23.1626 shares of common stock per $1,000 principal amount of convertible notes, with an initial effective conversion price of $43.17 per share of common stock. The conversion rate may be subject to adjustment upon the occurrence of certain specified events as provided in the indenture governing the Senior Convertible Notes, dated April 24, 2012 between the Company and Wells Fargo Bank, National Association, as trustee (the "Indenture"), but will not be adjusted for accrued but unpaid interest. Upon conversion of a Senior Convertible Note, the Company will settle the conversion obligation in cash up to the aggregate principal amount of the Senior Convertible Note being converted, and any conversion obligation in excess thereof will be settled in cash, shares of the Company's common stock, or a combination thereof, at the Company's election, subject to certain limitations as defined in the Indenture.
Holders of the Senior Convertible Notes may convert their notes at the applicable conversion rate under any of the following circumstances:
i.
During any fiscal quarter commencing after July 31, 2012, if for at least 20 trading days (whether or not consecutive) during the 30 consecutive trading day period ending on the last trading day of the immediately preceding fiscal quarter, the last reported sale price of the Company's common stock on such trading day is greater than or equal to 120% of the applicable conversion price on such trading day.
ii.
During the five consecutive business day period immediately following any five consecutive trading day period in which, for each trading day of that period, the trading price per $1,000 principal amount of the Senior Convertible

71

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Notes is less than 98% of the product of the last reported sale price of the Company's common stock on such trading day and the applicable conversion rate on such trading day.
iii.
If the Company calls any or all of the Senior Convertible Notes for redemption at any time prior to the close of business on the business day immediately preceding the redemption date.
iv.
Upon the occurrence of corporate transactions specified in the Indenture.
v.
At any time on and after February 1, 2019 until the close of business on the business day immediately preceding the maturity date.
Holders of the Senior Convertible Notes who convert their Senior Convertible Notes in connection with a make-whole fundamental change, as defined in the Indenture, may be entitled to a make-whole premium in the form of an increase to the conversion rate. In addition, upon the occurrence of a fundamental change, as defined in the Indenture, holders of the Senior Convertible Notes may require the Company to purchase all or a portion of their Senior Convertible Notes for cash at a price equal to 100% of the principal amount of the Senior Convertible Notes to be purchased plus any accrued but unpaid interest.
The number of shares the Company may deliver upon conversion of the Senior Convertible Notes will be subject to certain limitations, and the Company is subject to certain other obligations and restrictions related to such share caps, as described in the Indenture. On or after May 6, 2015, the Company may redeem for cash all or a portion of the Senior Convertible Notes if the last reported sale price of the Company's common stock has been at least 120% of the conversion price then in effect for at least 20 trading days (whether or not consecutive) during any 30 consecutive trading day period ending on, and including, the trading day immediately preceding the date on which the Company provides notice of redemption.
The Indenture provides for customary events of default, including, but not limited to, cross acceleration to certain other indebtedness of the Company and its subsidiaries. In the case of an event of default arising from specified events of bankruptcy or insolvency, all outstanding Senior Convertible Notes will become due and payable immediately without further action or notice. If any other event of default under the Indenture occurs or is continuing, the trustee or holders of at least 25% in aggregate principal amount of the then outstanding Senior Convertible Notes may declare all of the Senior Convertible Notes to be due and payable immediately.
In accounting for the Senior Convertible Notes, the Company segregated the liability component of the instrument from the equity component. The liability component was measured by estimating the fair value of a non-convertible debt instrument that is similar in its terms to the Senior Convertible Notes. Fair value was estimated through discounting future interest and principal payments, an income approach, due under the Senior Convertible Notes at a discount rate of 7.00%, an interest rate equal to the estimated borrowing rate for similar non-convertible debt. The excess of the aggregate face value of the Senior Convertible Notes over the estimated fair value of the liability component is recognized as a debt discount which will be amortized over the expected life of the Senior Convertible Notes using the effective interest rate method. Amortization of the debt discount is recognized as non-cash interest expense.
The equity component of the Senior Convertible Notes is measured as the residual difference between the aggregate face value of the Senior Convertible Notes and the estimated aggregate fair value of the liability component. The equity component will not be remeasured in subsequent periods provided that the component continues to meet the conditions necessary for equity classification.
The transaction costs incurred in connection with the issuance of the Senior Convertible Notes were allocated to the liability and equity components based on their relative values. Transaction costs allocated to the liability component are being amortized using the effective interest rate method and recognized as non-cash interest expense over the expected term of the Senior Convertible Notes. Transaction costs allocated to the equity component reduced the value of the equity component recognized in stockholders' equity.

72

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

As of January 31, 2019 and 2018, the Senior Convertible Notes consisted of the following:
 
January 31, 2019
 
January 31, 2018
 
(in thousands, except conversion rate and conversion price)
Principal value
$
45,644

 
$
65,644

Unamortized debt discount
(350
)
 
(2,497
)
Unamortized debt issuance costs
(45
)
 
(328
)
Carrying value of senior convertible notes
$
45,249

 
$
62,819

 
 
 
 
Carrying value of equity component, net of deferred taxes
$
14,923

 
$
14,923

 
 
 
 
Conversion rate (shares of common stock per $1,000 principal amount of notes)
23.1626

 
 
Conversion price (per share of common stock)
$
43.17

 
 
During fiscal 2019, the Company repurchased an aggregate of $20.0 million face value ($19.4 million carrying value) of its Senior Convertible Notes with $20.0 million in cash. All consideration was attributed to the extinguishment of the liability and the Company recognized a pre-tax loss of $0.6 million on the repurchase. During fiscal 2018, the Company repurchased an aggregate of $30.1 million face value ($28.1 million carrying value) of its Senior Convertible Notes with $29.1 million in cash. Of the $29.1 million in total cash consideration, $28.1 million was attributed to the extinguishment of the liability and $1.0 million was attributed to the reacquisition of a portion of the equity component of the instrument. The Company recognized an immaterial net pre-tax gain on the extinguishment of the liability and recognized a $0.6 million after-tax reduction in additional paid-in capital from the reacquisition of the equity component. In total, the Company has repurchased an aggregate of $104.4 million face value ($96.6 million carrying value) of its Senior Convertible Notes with $95.1 million in cash. Gains and losses on repurchases are included in other interest expense in the Consolidated Statements of Operations.
The Company recognized interest expense associated with its Senior Convertible Notes as follows:
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(in thousands)
Cash Interest Expense
 
 
 
 
 
Coupon interest expense
$
2,014

 
$
2,782

 
$
4,355

Noncash Interest Expense
 
 
 
 
 
Amortization of debt discount
1,626

 
2,104

 
2,849

Amortization of transaction costs
216

 
290

 
439

 
$
3,856

 
$
5,176

 
$
7,643

As of January 31, 2019, the unamortized debt discount will be amortized over a remaining period of 3 months. The if-converted value as of January 31, 2019 does not exceed the principal balance of the Senior Convertible Notes. The effective interest rate of the liability component was equal to 7.3% for each of the statements of operations periods presented.

73

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 11 - LONG-TERM DEBT
The following is a summary of long-term debt as of January 31, 2019 and 2018:
 
January 31, 2019
 
January 31, 2018
 
(in thousands)
Sale-leaseback financing obligations and capital leases, interest rates primarily ranging from 3.4% to 12.6% with various maturity dates through December 2030
$
25,419

 
$
23,152

Working Capital Line payable to Wells Fargo (see details in Note 7)

 
13,000

Real estate mortgage bearing interest at 2.09%, payable in monthly installments, maturing on June 30, 2026, secured by real estate assets
2,978

 

Other long-term debt primarily bearing interest at three-month EURIBOR plus 2.6%, payable in quarterly installments, maturing on January 31, 2021
755

 

 
29,152

 
36,152

Less current maturities
(3,340
)
 
(1,574
)
 
$
25,812

 
$
34,578

Long-term debt maturities are as follows:
 
Sale-Leaseback Financing Obligations & Capital Leases
 
 
 
Total Present Value of Minimum Lease Payments and Other Long-Term Debt
Years Ending January 31,
Minimum Lease Payments
 
Interest
 
Present Value of Minimum Lease Payments
 
Other Long-Term Debt
 
 
(in thousands)
2020
$
5,271

 
$
2,797

 
$
2,474

 
$
866

 
$
3,340

2021
5,276

 
2,500

 
2,776

 
683

 
3,459

2022
4,969

 
2,342

 
2,627

 
397

 
3,024

2023
4,126

 
1,971

 
2,155

 
397

 
2,552

2024
3,087

 
1,344

 
1,743

 
397

 
2,140

Thereafter
18,070

 
4,426

 
13,644

 
993

 
14,637

 
$
40,799

 
$
15,380

 
$
25,419

 
$
3,733

 
$
29,152

NOTE 12 - RESTRUCTURING COSTS
In February 2017, to better align the Company's cost structure and business in certain markets, the Company announced a dealership restructuring plan (the "Fiscal 2018 Restructuring Plan"), which resulted in the closure of one Construction location during the fourth quarter ended January 31, 2017 and the closure of 14 Agriculture locations during fiscal 2018. The Fiscal 2018 Restructuring Plan resulted in a reduction of expenses while allowing the Company to continue to provide a leading level of service to its customers. In total, over the term of the Fiscal 2018 Restructuring Plan, the Company recognized $13.9 million of restructuring charges consisting primarily of fixed asset impairment charges, lease termination costs and termination benefits. As of January 31, 2018, the Company had closed and fully exited all of these locations and had completed its Fiscal 2018 Restructuring Plan.
In fiscal 2016, the Company carried out a restructuring plan that reduced the Company's headcount and resulted in the closure of four Agriculture stores and eight Construction stores. As of January 31, 2017, this restructuring plan was substantially complete.
We incurred costs of $0.4 million, $10.5 million and $3.3 million during the years ended January 31, 2019, 2018 and 2017, related to these activities. Such costs are included in the restructuring costs and impairment of long-lived assets lines in the consolidated statements of operations.
    Restructuring costs associated with the Company's Fiscal 2018 Restructuring Plan are summarized in the following table:

74

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 
 
 
Year Ended January 31,
 
Cumulative Amount
 
2019
 
2018
 
2017
 
(in thousands)
Lease accrual and termination costs
$
6,095

 
$
414

 
$
5,681

 
$

Termination benefits
5,053

 

 
5,053

 

Impairment of fixed assets, net of gains on asset disposition
2,206

 

 
(751
)
 
2,957

Asset relocation and other costs
516

 

 
516

 

 
$
13,870

 
$
414

 
$
10,499

 
$
2,957

Restructuring costs associated with the Company's fiscal 2016 restructuring plan are summarized in the following table:    
 
Year Ended
 
January 31, 2017
 
(in thousands)
Lease accrual and termination costs
$
(128
)
Termination benefits
399

Impairment of fixed assets, net of gains on asset disposition

Asset relocation and other costs
48

 
$
319

Restructuring charges are summarized by segment in the following table:
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(in thousands)
Segment
 
 
 
 
 
Agriculture
$
441

 
$
6,886

 
$
983

Construction
(27
)
 
2,093

 
1,914

International

 
62

 

Shared Resources

 
1,458

 
379

Total
$
414

 
$
10,499

 
$
3,276

A reconciliation of the beginning and ending exit cost liability balance associated with our Fiscal 2018 Restructuring Plan is as follows:
 
 
Lease Accrual & Termination Costs
 
Termination Benefits
 
Asset Relocation & Other Costs
 
Total
 
 
(in thousands)
Balance, January 31, 2017
 

 
$

 

 
$

Exit costs incurred and charged to expense
 
5,681

 
4,568

 
516

 
10,765

Exit costs paid
 
(288
)
 
(4,164
)
 
(516
)
 
(4,968
)
Balance, January 31, 2018
 
5,393

 
404

 

 
5,797

Exit costs incurred and charged to expense
 
414

 

 

 
414

Exit costs paid
 
(3,428
)
 
(404
)
 

 
(3,832
)
Balance, January 31, 2019
 
2,379

 

 

 
2,379



75

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

As of January 31, 2019 and January 31, 2018, $2.2 million and $4.8 million of the exit cost liability is included in other long-term liabilities and $0.2 million and $1.0 million is included in accrued expenses and other in the consolidated balance sheets.
During the year ended January 31, 2019, the Company paid $3.0 million to terminate the real estate lease agreement for one of the Company's previously closed stores. The termination payment approximated the recorded lease accrual liability and therefore the impact to the consolidated statement of operations was not material. As circumstances warrant, the Company revises its assumptions regarding the timing and amount of estimated future cash flows associated with its cease-use lease liabilities of its closed store locations. During the year ended January 31, 2019, the Company recognized a restructuring expense of $0.4 million as the result of adjustments to its cease-use liabilities for certain of its closed stores.
NOTE 13 - DERIVATIVE INSTRUMENTS
The Company holds derivative instruments for the purpose of minimizing exposure to fluctuations in foreign currency exchange rates and benchmark interest rates to which the Company is exposed in the normal course of its operations.
Cash Flow Hedge
The Company previously was party to an interest rate swap instrument which had a notional amount of $100.0 million, an effective date of September 30, 2014 and a maturity date of September 30, 2018. The objective of the instrument was to protect the Company from changes in benchmark interest rates to which the Company is exposed through certain of its variable interest rate credit facilities. The instrument provided for a fixed interest rate of 1.901% through the instrument's maturity date. The interest rate swap instrument was designated as a cash flow hedging instrument and accordingly changes in the effective portion of the fair value of the instrument have been recorded in other comprehensive income and only reclassified into earnings in the period(s) in which the related hedged item affects earnings or the anticipated underlying hedged transactions are no longer probable of occurring. In April 2017, the Company elected to terminate its outstanding interest rate swap instrument. The Company paid $0.9 million to terminate the instrument. This cash payment is presented as a financing cash outflow in the consolidated statements of cash flows.
Derivative Instruments Not Designated as Hedging Instruments
The Company uses foreign currency forward contracts to hedge the effects of fluctuations in exchange rates on outstanding intercompany loans. The Company does not formally designate and document such derivative instruments as hedging instruments; however, the instruments are an effective economic hedge of the underlying foreign currency exposure. Both the gain or loss on the derivative instrument and the offsetting gain or loss on the underlying intercompany loan are recognized in earnings immediately, thereby eliminating or reducing the impact of foreign currency exchange rate fluctuations on net income. The Company's foreign currency forward contracts generally have three-month maturities, maturing on the last day of each fiscal quarter. The notional value of outstanding foreign currency contracts as of January 31, 2019 and 2018 was $14.1 million and $14.4 million.
As of January 31, 2019 and 2018, the fair value of the Company's outstanding derivative instruments was not material. Derivative instruments recognized as assets are recorded in prepaid expenses and other in the consolidated balance sheets, and derivative instruments recognized as liabilities are recorded in accrued expenses and other in the consolidated balance sheets.

76

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

The following table sets forth the gains and losses recognized in other comprehensive income (loss) ("OCI") and income (loss) related to the Company’s derivative instruments for the years ended January 31, 2019, 2018 and 2017. All amounts included in income (loss) in the table below from derivatives designated as hedging instruments relate to reclassifications from accumulated other comprehensive income.
 
Year Ended January 31,
 
2019
 
2018
 
2017
 
OCI
 
Income
 
OCI
 
Income
 
OCI
 
Income
 
(in thousands)
 
(in thousands)
 
(in thousands)
Derivatives Designated as Hedging Instruments:
 
 
 
 
 
 
 
 
 
 
 
Cash flow hedges:
 
 
 
 
 
 
 
 
 
 
 
Interest rate swap (a)

 

 
48

 
(1,091
)
 
263

 
(1,384
)
Derivatives Not Designated as Hedging Instruments:
 
 
 
 
 
 
 
 
 
 
 
Foreign currency contracts (b)

 
1,696

 

 
(1,510
)
 

 
365

Total Derivatives
$

 
$
1,696

 
$
48

 
$
(2,601
)
 
$
263

 
$
(1,019
)
(a) No material hedge ineffectiveness has been recognized. The amounts show in income (loss) above are reclassification amounts from accumulated other comprehensive income (loss) and are recorded in Floorplan interest expense in the consolidated statements of operations

(b) Amounts are included in Interest income and other income (expense) in the consolidated statements of operations
During the year ended January 31, 2018, the Company reclassified $0.6 million of pre-tax accumulated losses on its interest rate swap instrument from accumulated other comprehensive income (loss) to income as the original forecasted interest payments, which served as the hedged item underlying the interest rate swap instrument, were no longer probable of occurring during the time period over which such transactions were previously anticipated to occur. As of January 31, 2018, the Company had no remaining pre-tax net unrealized losses associated with its interest rate swap cash flow hedging instrument.
NOTE 14 - CONTINGENCIES AND GUARANTEES
Guarantees
The Company has provided residual value guarantees to CNH Industrial Capital in connection with certain customer leasing arrangements with CNH Industrial Capital. The Company, as guarantor, may be required to provide payment to CNH Industrial Capital at the termination of the lease agreement if the customer fails to exercise the purchase option under the leasing agreement and the proceeds CNH Industrial Capital receives upon disposition of the leased asset are less than the purchase option price as stipulated in the lease agreement. As of January 31, 2019, the maximum amount of residual value guarantees was approximately $4.2 million and the lease agreements have termination dates ranging from 2019 to 2022. As of January 31, 2019, the Company has recognized a liability of approximately $4.0 million based on its estimates of the likelihood and amount of residual value guarantees that will become payable at the termination dates of the underlying leasing agreements discounted at a rate of interest to reflect the risk inherent in the liability. As of January 31, 2019, the Company has recorded a current liability, recognized in accrued expenses and other in the consolidated balance sheets, of $2.1 million, and a long-term liability, recognized in other long-term liabilities in the consolidated balance sheets, of $1.9 million.
As of January 31, 2019, the Company had $1.5 million of guarantees on customer financing with CNH Industrial Capital. In the event that the customer defaulted on the payments owed to CNH Industrial Capital, the Company as the guarantor would be required to make those payments and any accelerated indebtedness to CNH Industrial Capital. Upon such payment, the Company would be entitled to enforce normal creditor rights against the customer including collection action for monetary damages or re-possession of the collateral if CNH Industrial Capital has a perfected security interest. No liabilities associated with these guarantees are included in the consolidated balance sheets as of January 31, 2019 as the Company deems the probability of being required to make such payments to be remote.
Litigation
On October 11, 2017, the Romania Competition Council (“RCC”) initiated an administrative investigation of the Romanian Association of Manufacturers and Importers of Agricultural Machinery (“APIMAR”) and all its members, including Titan Machinery Romania. The RCC's investigation involves whether the APIMAR members engaged in anti-competitive practices in their sales of agricultural machinery not involving European Union ("EU") subvention funding programs, by referring to the published sales prices governing EU subvention funded transactions, which prices are mandatorily disclosed to

77

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

and published by AFIR, a Romanian government agency that oversees the EU subvention funding programs in Romania. The investigation is in a preliminary stage and the Company is currently unable to predict its outcome or reasonably estimate any potential loss that may result from the investigation.
The Company is engaged in proceedings incidental to the normal course of business. Due to their nature, such legal proceedings involve inherent uncertainties, including but not limited to, court rulings, negotiations between affected parties and governmental intervention. Based upon the information available to the Company and discussions with legal counsel, it is the Company's opinion that the outcome of the various legal actions and claims that are incidental to its business will not have a material impact on the financial position, results of operations or cash flows. Such matters, however, are subject to many uncertainties, and the outcome of any matter is not predictable with assurance.
Insurance
The Company has insurance policies with varying deductibility levels for property and casualty losses and is insured for losses in excess of these deductibles on a per claim and aggregate basis. The Company is primarily self-insured for health care claims for eligible participating employees. The Company has stop-loss coverage to limit its exposure to significant claims on a per claim and annual aggregate basis. The Company determines its liabilities for claims, including incurred but not reported losses, based on all relevant information, including actuarial estimates of claim liabilities.
During fiscal 2017, the Company received $3.0 million of proceeds from its insurance carriers related to claims submitted for insurable events at two of its locations; $1.4 million of proceeds were reflected as investing cash inflows as such amounts were reimbursements associated with the Company's long-lived assets, while the remaining $1.6 million was included in cash flows from operating activities as the amounts were reimbursements associated with current assets, business interruption recoveries and cost reimbursements. In total, the Company recognized, as a reduction of operating expenses in its consolidated statements of operations, a gain of $2.0 million from insurance recoveries, of which $0.7 million arose from business interruption recoveries.
Other Matters
The Company is the lessee under many real estate leases in which it agrees to indemnify the lessor from certain liabilities arising as a result of the use of the leased premises, including environmental liabilities, or a breach of the lease by the lessee. Additionally, from time to time, the Company enters into agreements with third parties in connection with the sale of assets in which it agrees to indemnify the purchaser from certain liabilities or costs arising in connection with the assets. Also, in the ordinary course of business in connection with purchases or sales of goods and services, the Company enters into agreements that may contain indemnification provisions. In the event that an indemnification claim is asserted, the Company's liability would be limited by the terms of the applicable agreement. See additional information on operating lease commitments in Note 15.
NOTE 15 - OPERATING LEASE COMMITMENTS
The Company leases approximately 120 buildings under operating lease agreements as well as office equipment and vehicles under various operating lease agreements. Rent and lease expense under all operating leases totaled $18.6 million, $20.0 million and $21.3 million during the years ended January 31, 2019, 2018 and 2017. The leases expire at various dates through January 2031. Certain leases have fluctuating minimum lease payments. The Company recognizes lease expense on a straight-line basis over the expected term of the lease.

78

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Approximate future minimum lease payment commitments are as follows:
Years ending January 31,
Amount
 
(in thousands)
2020
$
20,117

2021
18,786

2022
17,994

2023
17,117

2024
16,143

Thereafter
68,409

 
$
158,566

The Company's store lease agreements contain lease periods primarily ranging from automatically renewable month-to-month terms to 15 years in length. Certain of the lease agreements contain terms such as an option to purchase the property at fair value, renew or extend the lease for an additional period at the conclusion of the original lease term or automatically renew the lease term at the conclusion of the original lease period on a month-to-month or year-to-year basis. A majority of the leases provide for fixed monthly rental payments and require the Company to pay the real estate taxes on the properties for the lease periods. All of the leases require that the Company maintains public liability and personal property insurance on each of the leased premises, and a majority of the leases require the Company to indemnify the lessor in connection with any claims arising from the leased premises during its occupation of the property. Most of the leases prohibit assigning the lease agreements or subletting the leased premises without the prior written consent of the lessor. In most of the leases, the Company has been granted a right of first refusal or other options to purchase the property.
NOTE 16 - RELATED PARTY TRANSACTIONS
Effective February 1, 2017, the Company and Peter Christianson (our former President and former member of our Board of Directors), who is a brother of Tony Christianson (a member of our Board of Directors), agreed to terminate a consulting arrangement between the parties. During fiscal 2017, Mr. Peter Christianson received $0.5 million in fees, including group medical and dental coverage expenses as paid by the Company on behalf of Mr. Peter Christianson, from the Company under the terms of the consulting agreement. In connection with the termination, the Company agreed to pay Mr. Peter Christianson the sum of $0.7 million, payable in two equal installments in fiscal 2018 and fiscal 2019. All unvested stock options and shares of restricted stock held by Mr. Peter Christianson were allowed to vest as scheduled. As a result of the termination agreement, the Company recognized for fiscal 2018, a total of $0.8 million in termination costs, consisting of $0.7 million for future cash payments owed to Mr. Peter Christianson and $0.1 million for unvested shares of restricted stock. These termination costs are included in restructuring costs in the consolidated statements of operations. As of January 31, 2019, all amounts owed to Mr. Peter Christianson had been paid in full.
Effective September 8, 2017, the Company sold a real estate asset that was primarily used for field training purposes to Stiklestad LLC for $1.8 million. All consideration related to the transaction was exchanged at closing on September 8, 2017, and there are no amounts owed to either party following that date. Stiklestad LLC is owned by members of the family of David Meyer, the Company's Chief Executive Officer. No gain or loss was recognized on the transaction and the Company believes that the selling price approximated fair value.

79

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 17 - INCOME TAXES
The components of income (loss) before income taxes for the years ended January 31, 2019, 2018 and 2017 consist of the following:
 
2019
 
2018
 
2017
 
(in thousands)
U.S.
$
10,994

 
$
(16,644
)
 
$
(22,244
)
Foreign
5,160

 
2,205

 
(469
)
Total
$
16,154

 
$
(14,439
)
 
$
(22,713
)
The provision for (benefit from) income taxes charged to income for the years ended January 31, 2019, 2018 and 2017 consists of the following:
 
2019
 
2018
 
2017
 
(in thousands)
Current
 
 
 
 
 
Federal
$
(110
)
 
$
130

 
$
(5,368
)
State
(189
)
 
50

 
(85
)
Foreign
1,760

 
1,350

 
116

Total current taxes
1,461

 
1,530

 
(5,337
)
Deferred
 
 
 
 
 
Federal
2,071

 
(6,247
)
 
(1,819
)
State
(45
)
 
270

 
(471
)
Foreign
485

 
(2,943
)
 
(551
)
Total deferred taxes
2,511

 
(8,920
)
 
(2,841
)
 
$
3,972

 
$
(7,390
)
 
$
(8,178
)
The reconciliation of the statutory federal income tax rate to the Company's effective rate is as follows:
 
2019
 
2018
 
2017
U.S. statutory rate
21.0
 %
 
(33.8
)%
 
(35.0
)%
Foreign statutory rates
0.6
 %
 
1.4
 %
 
2.8
 %
State taxes on income net of federal tax benefit
5.6
 %
 
(4.3
)%
 
(4.3
)%
Valuation allowances
(5.2
)%
 
(4.4
)%
 
(2.7
)%
U.S. statutory rate reduction
 %
 
(13.9
)%
 
 %
All other, net
2.6
 %
 
3.8
 %
 
3.2
 %
 
24.6
 %
 
(51.2
)%
 
(36.0
)%

80

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Deferred tax assets and liabilities consist of the following as of January 31, 2019 and 2018:
 
2019
 
2018
 
(in thousands)
Deferred tax assets:
 
 
 
Inventory allowances
$
3,598

 
$
5,061

Intangible assets
2,670

 
3,763

Net operating losses
6,266

 
12,366

Accrued liabilities and other
4,120

 
5,084

Receivables
740

 
719

Stock-based compensation
1,103

 
1,119

Other
806

 
1,241

Total deferred tax assets
19,303

 
29,353

Valuation allowances
(6,727
)
 
(7,717
)
Deferred tax assets, net of valuation allowances
$
12,576

 
$
21,636

 
 
 
 
Deferred tax liabilities:
 
 
 
Property and equipment
$
(14,433
)
 
$
(19,810
)
Senior convertible notes
(88
)
 
(629
)
Total deferred tax liabilities
$
(14,521
)
 
$
(20,439
)
 
 
 
 
Net deferred tax asset (liability)
$
(1,945
)
 
$
1,197

On December 22, 2017, the U.S. government enacted tax legislation commonly referred to as the Tax Cuts and Jobs Act (the "Tax Act"). The Tax Act made broad changes to the U.S. tax code, including, among other things, to 1) reduce the U.S. federal corporate tax rate from 35% to 21%; 2) generally eliminate U.S. federal income taxes on dividends from foreign subsidiaries; 3) institute a one-time transaction tax on certain unrepatriated earnings of an entity's foreign subsidiaries; 4) create a new provision designed to tax global intangible low-taxed income ("GILTI"); 5) creates a new limitation on deductible interest expense; and 6) modify the rules related to uses and limitations of net operating losses.
The enactment of the Tax Act lowered the U.S. federal corporate tax rate from 35% to 21%, accordingly, for the fiscal year ended January 31, 2018, the Company had a blended corporate statutory tax rate of 33.8%, which is based on the number of days in the fiscal year before and after the enactment date. The Company recorded a net tax benefit of $1.8 million for the fiscal year ended January 31, 2018 as a result of remeasuring its domestic deferred tax assets, deferred tax liabilities and any valuation allowances based on the 21% corporate tax rate at which these deferred tax amounts are expected to reverse in the future. The Tax Act instituted a one-time transaction tax on previously untaxed accumulated and current earnings and profits of our foreign subsidiaries. The Company did not record a liability for the transaction tax because of a lack of accumulated earnings and profits, on a combined basis, of our foreign subsidiaries. The Tax Act requires that certain income (i.e., GILTI) earned by foreign subsidiaries must be included currently in gross income of the U.S. shareholder. The Company has elected to treat future GILTI inclusions as a current period expense when incurred.
The changes in the Tax Act were broad and complex, because of this complexity, entities were allowed a measurement period of up to one year after the enactment date of the Tax Act to finalize the recording of the related tax impacts. The Company completed its assessment of all aspects of the Tax Act during the year ended January 31, 2019. No material adjustments were recognized during the year ended January 31, 2019 as the Company completed its assessment of the Tax Act.
As of January 31, 2019, the Company has recorded $60.7 million of net operating loss carryforwards within certain of its U.S. state and foreign jurisdictions; $12.6 million of net operating loss carryforwards are within foreign jurisdictions with unlimited carryforward periods, $8.7 million are within foreign jurisdictions that expire at various dates between the Company's fiscal years 2020 and 2024, and $39.4 million are within U.S. states that expire at various dates between the Company's fiscal years 2031 and 2038.
In reviewing our deferred tax assets as of January 31, 2019 and 2018, we concluded that a partial valuation allowance for U.S. federal and state deferred tax assets, including state net operating losses, and a full valuation allowance for certain of

81

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

our foreign deferred tax assets, including net operating losses, was warranted. In total, we have recognized a valuation allowance of $6.7 million and $7.7 million as of January 31, 2019 and 2018. The recognition of the valuation allowances for our U.S. and foreign deferred tax assets was based on the presence of historical losses and our expected future sources of taxable income, including the anticipated future reversal of our existing deferred tax assets and liabilities.
During the fiscal year ended January 31, 2018, the Company concluded, based upon all available evidence, it was more likely than not that it would have sufficient future taxable income to realize the deferred tax assets of its Ukrainian subsidiary. As a result, the Company released the $3.5 million valuation allowance and recognized a corresponding benefit from income taxes in the consolidated statement of operations for the year ended January 31, 2018. The Company's conclusion regarding the realizability of such deferred tax assets was based on recent profitable operations in Ukraine resulting in a cumulative profit over the three-year period ending January 31, 2018, our projections of future profitability in Ukraine, the relative economic and political stability in Ukraine and the unlimited carryforward period of net operating losses in Ukraine.
The Company files income tax returns in the U.S. federal jurisdiction and various states and foreign countries. It is no longer subject to income tax examinations by U.S. federal tax authorities for fiscal years ended prior to January 31, 2016 and state tax authorities for fiscal years ended prior to January 31, 2015. Certain foreign jurisdictions are no longer subject to income tax examinations for the calendar year periods ranging between 2012 and 2015, depending on the jurisdiction of the entity. During the fiscal year ended January 31, 2019, the Ukrainian taxing authorities completed their examination of our calendar year 2012 through 2015 Ukrainian income tax returns.
As of January 31, 2019, the Company had accumulated undistributed earnings in non-U.S. subsidiaries of approximately $11.0 million. Upon repatriation of such earnings the Company could be subject to additional U.S. or foreign taxes. The Company has not recorded a deferred tax liability associated with these undistributed earnings as such earnings are to be reinvested outside of the U.S. indefinitely. It is not practicable to estimate the amount of additional tax that might be payable if such earnings were repatriated.     
NOTE 18 - CAPITAL STRUCTURE
The Company's certificate of incorporation provides it with the authority to issue 50,000,000 shares of $0.00001 par value stock, consisting of 45,000,000 shares of common stock and 5,000,000 shares classified as undesignated.
NOTE 19 - STOCK-BASED COMPENSATION
Stock-Based Compensation Plans
The Company has two stock-based compensation plans, the 2014 Equity Incentive Plan and the 2005 Equity Incentive Plan (collectively the "Plans"), to provide incentive compensation to participants for services that have been or will be performed for continuing as employees or members of the Board of Directors of the Company. Under these plans, which are approved by the stockholders of the Company, the Company may grant incentive stock options, non-qualified stock options and restricted stock for up to a maximum number of shares of common stock set forth in the Plans under all forms of awards. Shares issued for stock-based awards consist of authorized but unissued shares. The Plans authorize and make available 1,650,000 shares for equity awards. As of January 31, 2019, the Company has 755,278 shares authorized and available for future equity awards.
Compensation cost arising from stock-based compensation and charged to operations was $2.7 million, $3.1 million and $2.1 million for the years ended January 31, 2019, 2018 and 2017. The related income tax benefit (net) was $0.8 million, $1.2 million and $0.8 million for the years ended January 31, 2019, 2018 and 2017.
Stock Options
The Company has previously granted stock options to employees and members of the Board of Directors of the Company. These stock options vested over a period of four to six years for employees and immediately for members of the Board of Directors, and had contractual terms of five to ten years. As of January 31, 2019, there were no outstanding or exercisable stock options.

82

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

The following table summarizes stock option activity for the year ended January 31, 2019:
 
Number of Stock Options
 
Weighted Average Exercise Price
 
Aggregate Intrinsic Value
 
Weighted Average Remaining Contractual Life (Years)
 
(in thousands)
 
 
 
(in thousands)
 
 
Outstanding at January 31, 2018
68

 
$
21.63

 
$
18

 
0.5
Granted

 

 
 
 
 
Exercised
(5
)
 
18.46

 
 
 
 
Forfeited
(63
)
 
21.88

 
 
 
 
Outstanding at January 31, 2019

 
$

 
$

 
0.0
The aggregate intrinsic value of stock options exercised was immaterial for the years ended January 31, 2019 and 2017, and was $1.0 million for the year ended January 31, 2018. As of January 31, 2019, there was no unrecognized compensation cost related to stock options as all awards have fully vested.
Restricted Stock Awards ("RSAs")
The Company grants RSAs as part of its long-term incentive compensation to employees and members of the Board of Directors of the Company. The fair value of these awards is determined based on the closing market price of the Company's stock on the date of grant. The RSAs primarily vest over a period of three to six years for employees and over one year for members of the Board of Directors. The Company recognizes compensation expense ratably over the vesting period of the award. The restricted common stock underlying these awards are deemed issued and outstanding upon grant, and carry the same voting and dividend rights of unrestricted outstanding common stock.
The following table summarizes RSA activity for the year ended January 31, 2019:
 
Shares
 
Weighted Average Grant Date Fair Value
 
(in thousands)
 
 
Nonvested at January 31, 2018
406

 
$
16.25

Granted
145

 
17.22

Forfeited
(7
)
 
16.04

Vested
(164
)
 
14.04

Nonvested at January 31, 2019
380

 
$
15.88

The weighted-average grant date fair value of RSAs granted was $17.22, $17.47 and $11.01 during the years ended January 31, 2019, 2018 and 2017. The total fair value of RSAs vested was $3.6 million, $3.6 million and $1.3 million during the years ended January 31, 2019, 2018 and 2017. As of January 31, 2019, there was $4.0 million of unrecognized compensation cost related to nonvested RSAs that is expected to be recognized over a weighted-average period of 1.9 years.
Restricted Stock Units ("RSUs")
The Company grants RSUs as part of its long-term incentive compensation to certain employees of the Company. The fair value of these awards is determined based on the closing market price of the Company's stock on the date of grant. The RSUs primarily vest over a period of three to six years. The Company recognizes compensation expense ratably over the vesting period of the award. The restricted common stock underlying these awards are not deemed issued or outstanding upon grant, and do not carry any voting or dividend rights.

83

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

The following table summarizes RSU activity for the year ended January 31, 2019:
 
Shares
 
Weighted Average Grant Date Fair Value
 
(in thousands)
 
 
Nonvested at January 31, 2018
22

 
$
14.70

Granted

 

Modified
(11
)
 
15.01

Forfeited
(4
)
 
14.47

Vested
(2
)
 
$
13.53

Nonvested at January 31, 2019
5

 
$
14.19

The weighted-average grant date fair value of RSUs granted was $17.58 and $10.69 during the years ended January 31, 2018 and 2017. As of January 31, 2019, there was $0.1 million of unrecognized compensation cost related to nonvested RSUs that is expected to be recognized over a weighted-average period of 1.7 years.
During the year ended January 31, 2019, the Company modified certain of its RSU agreements to require the settlement of all future vested awards to be paid in cash in an amount equal to the number of vested awards multiplied by the stock price of the Company on the date of vesting. Due to the cash settlement provision, these awards became liability-classified share-based payments on the modification date. The accounting for this modification did not have a material impact on the Company's consolidated statement of operations or financial position.
Long-Term Cash Incentive Awards
The Company grants long-term cash incentive awards as part of its long-term incentive compensation to certain international employees of the Company. The awards vest over a period of approximately four years and entitle the award recipient to a cash payment on the vesting date equal to the number of vested shares multiplied by the stock price of the Company on the date of vesting. These awards are liability-classified share-based payment awards in which fair value of the award is remeasured at each period until the liability is settled. Fair value of these awards is determined based on the closing price of the Company's stock as of the end of each reporting period. Changes in the fair value of the liability are recognized as compensation cost over the requisite service period. The percentage of the fair value that is accrued as compensation cost at the end of each period is equal to the percentage of the requisite service that has been rendered at that date.
The following table summarizes activity for long-term cash incentive awards for the year ended January 31, 2019:
 
Shares
 
Weighted Average Grant Date Fair Value
 
(in thousands)
 
 
Nonvested at January 31, 2018

 

Granted
13

 
17.25

Modified
11

 
15.01

Forfeited

 

Vested

 

Nonvested at January 31, 2019
24

 
16.22

The weighted-average grant date fair value of long-term cash incentive awards granted was $17.25 during the year ended January 31, 2019. As of January 31, 2019, based on the Company's stock price on that day, there was $0.2 million of unrecognized compensation cost related to nonvested awards that is expected to be recognized over a weighted-average period of 1.4 years.

84

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)


NOTE 20 - ACCUMULATED OTHER COMPREHENSIVE INCOME (LOSS)
The following is a summary of the changes in accumulated other comprehensive income (loss), by component, for the fiscal years ended January 31, 2019, 2018 and 2017:
 
Foreign Currency Translation Adjustment
 
Net Investment Hedging Instruments, Unrealized Gain (Loss)
 
Cash Flow Hedging Instruments, Unrealized Gain (Loss)
 
Total Accumulated Other Comprehensive Income (Loss)
 
(in thousands)
Balance, January 31, 2016
$
(5,500
)
 
$
2,711

 
$
(1,672
)
 
$
(4,461
)
Other comprehensive income (loss) before reclassifications
(1,310
)
 

 
263

 
(1,047
)
Amounts reclassified from accumulated other comprehensive income (loss)

 

 
1,384

 
1,384

Total other comprehensive income (loss), before tax
(1,310
)
 

 
1,647

 
337

Tax effect

 

 
(659
)
 
(659
)
Total other comprehensive income (loss), net of tax
(1,310
)
 

 
988

 
(322
)
Balance, January 31, 2017
(6,810
)
 
2,711

 
(684
)
 
(4,783
)
Other comprehensive income (loss) before reclassifications
2,399

 

 
48

 
2,447

Amounts reclassified from accumulated other comprehensive income (loss)

 

 
1,091

 
1,091

Total other comprehensive income (loss), before tax
2,399

 

 
1,139

 
3,538

Tax effect

 

 
(455
)
 
(455
)
Total other comprehensive income (loss), net of tax
2,399

 

 
684

 
3,083

Balance, January 31, 2018
(4,411
)
 
2,711

 

 
(1,700
)
Other comprehensive income (loss) before reclassifications
(640
)
 

 

 
(640
)
Amounts reclassified from accumulated other comprehensive income (loss)

 

 

 

Total other comprehensive income (loss), before tax
(640
)
 

 

 
(640
)
Tax effect

 

 

 

Total other comprehensive income (loss), net of tax
(640
)
 

 

 
(640
)
Balance, January 31, 2019
$
(5,051
)
 
$
2,711

 
$

 
$
(2,340
)
Income taxes are not provided for foreign currency translation adjustments arising from permanent investments in international subsidiaries. Reclassifications are made to avoid double counting in comprehensive income (loss) items that are also recorded as part of net income (loss). Reclassification amounts from cash flow hedging instruments for the years ended January 31, 2018 and 2017 are recorded in floorplan interest expense in the consolidated statements of operations. The tax effect of these reclassifications, recognized as a tax benefit in the amount of $0.4 million and $0.6 million for the years ended January 31, 2018 and 2017, are recorded in provision for (benefit from) income taxes in the consolidated statements of operations.
NOTE 21 - EMPLOYEE BENEFIT PLANS
The Company has a 401(k) profit-sharing plan ("401(k) Plan") for full-time employees at least 19 years of age. The Company matches 50% of the first 6% of participating employees' contributions. In addition, the Company may make a discretionary contribution to the 401(k) Plan as determined by the Board of Directors, with a maximum amount equal to the amount allowed under the IRS regulations. The Company recognized expense for contributions made to the 401(k) Plan totaling $2.7 million, $2.5 million and $2.5 million for the fiscal years ended January 31, 2019, 2018 and 2017. All amounts contributed during these years reflected matching contributions, as no discretionary contributions were made by the Company to the 401(k) Plan.
NOTE 22 - BUSINESS COMBINATIONS
On July 2, 2018, the Company, through a newly created, wholly-owned German subsidiary, acquired all interests of two commonly-controlled companies, AGRAM Landtechnikvertrieb GmbH and AGRAM Landtechnik Rollwitz GmbH (collectively "AGRAM"), for $19.2 million in cash consideration. Founded in 1990, AGRAM is a CaseIH and Steyr dealership

85

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

complex consisting of four agriculture dealership locations in the following cities of Germany: Altranft, Burkau, Gutzkow, and Rollwitz. Our acquisition of these entities provides the Company the opportunity to expand our international presence into the large, well-established German market.
Following the acquisition, the legal name of AGRAM Landtechnikvertrieb GmbH was changed to Titan Machinery Deutschland GmbH ("Titan Deutschland") and a legal merger was completed merging the three German legal entities into a single entity with Titan Deutschland remaining as the surviving entity.
The AGRAM acquisition has been accounted for under the acquisition method of accounting, which requires the Company to estimate the acquisition date fair value of the assets acquired and liabilities assumed. The fair value of the consideration paid exceeded the estimated fair value of the assets acquired and liabilities assumed, which resulted in the recognition of $0.9 million of goodwill. The recognition of goodwill arose from the acquisition of an assembled workforce and anticipated synergies within our International segment. The entire goodwill amount will be assigned to the International segment and is not expected to be deductible for income tax purposes. The Company recognized a customer relationship intangible asset in the amount of $0.1 million, which will be amortized over a three-year period, and recognized a distribution rights intangible asset in the amount of $1.8 million that is an indefinite-lived intangible asset not subject to amortization. The Company estimated the fair value of the customer relationship and distribution rights intangible assets using a multi-period excess earnings model, an income approach. All acquisition-related costs, which amounted to $0.2 million, have been expensed as incurred and recognized as operating expenses in the consolidated statement of operations.
The allocation of the purchase price to assets acquired and liabilities assumed is as follows:
(in thousands)
 
Assets acquired:
 
Cash
$
3,857

Receivables
5,340

Inventories
21,725

Prepaid expenses and other
887

Property and equipment
3,512

Intangible assets
1,944

Goodwill
924

Other
61

 
$
38,250

Liabilities assumed:
 
Accounts payable
1,553

Floorplan payable
13,820

Deferred revenue
85

Accrued expenses and other
1,279

Long-term debt
1,725

Deferred income taxes
632

 
$
19,094

Net assets acquired
$
19,156

NOTE 23 - FAIR VALUE OF FINANCIAL INSTRUMENTS
As of January 31, 2019 and 2018, the fair value of the Company's foreign currency contracts, which are either assets or liabilities measured at fair value on a recurring basis, was not material. These foreign currency contracts were valued using a discounted cash flow analysis, an income approach, utilizing readily observable market data as inputs, which is classified as a Level 2 fair value measurement.
The Company also valued certain long-lived assets at fair value on a non-recurring basis as of January 31, 2019, October 31, 2018 and January 31, 2018 as part of its long-lived asset impairment testing. The estimated fair value of such assets as of January 31, 2019, October 31, 2018 and January 31, 2018 was $0.9 million, $0.7 million and $0.9 million. Fair value was

86

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

determined by utilizing an income approach incorporating both observable and unobservable inputs, and are deemed to be Level 3 fair value inputs. The most significant unobservable inputs include forecasted net cash generated from the use of the assets and the discount rate applied to such cash flows to arrive at a fair value estimate. In addition, in certain instances the Company estimated the fair value of long-lived assets to approximate zero as no future cash flows were assumed to be generated from the use of such assets and the expected sales values were deemed to be nominal. All such fair value measurements were based on unobservable inputs and thus are Level 3 fair value inputs.
The Company also has financial instruments that are not recorded at fair value in its consolidated financial statements. The carrying amount of cash, receivables, payables, short-term debt and other current liabilities approximates fair value because of the short maturity and/or frequent repricing of those instruments, which are Level 2 fair value inputs. Based upon current borrowing rates with similar maturities, which are Level 2 fair value inputs, the carrying value of long-term debt approximates the fair value as of January 31, 2019 and 2018. The following table provides details on the Senior Convertible Notes as of January 31, 2019 and 2018. The difference between the face value and the carrying value of these notes is the result of the allocation between the debt and equity components, and unamortized debt issuance costs (see Note 10). Fair value of the Senior Convertible Notes was estimated based on Level 2 fair value inputs.
 
January 31, 2019
 
January 31, 2018
 
Estimated Fair Value
 
Carrying Value
 
Face Value
 
Estimated Fair Value
 
Carrying Value
 
Face Value
 
(in thousands)
 
(in thousands)
Senior convertible notes
$
45,644

 
$
45,249

 
$
45,644

 
$
65,000

 
$
62,819

 
$
65,644

NOTE 24 - SEGMENT INFORMATION AND OPERATING RESULTS
The Company has three reportable segments: Agriculture, Construction and International. The Company's segments are determined based on management structure, which is organized based on types of products sold and geographic areas, as described in the following paragraphs. The operating results for each segment are reported separately to the Company's Chief Executive Officer to make decisions regarding the allocation of resources, to assess the Company's operating performance and to make strategic decisions.
The Company's Agriculture segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from large-scale farming to home and garden use in North America. This segment also includes ancillary sales and services related to agricultural activities and products such as equipment transportation, Global Positioning System ("GPS") signal subscriptions and finance and insurance products.
The Company's Construction segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from heavy construction to light industrial machinery use to customers in North America. This segment also includes ancillary sales and services related to construction activities such as equipment transportation, GPS signal subscriptions and finance and insurance products.
The Company’s International segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from large-scale farming and construction to home and garden use to customers in Eastern Europe.
Revenue generated from sales to customers outside of the United States was $232.7 million, $208.9 million and $150.3 million for the years ended January 31, 2019, 2018 and 2017. As of January 31, 2019 and 2018, $12.3 million and $4.8 million of the Company's long-lived assets were held in its European subsidiaries.
The Company retains various unallocated income/(expense) items and assets at the general corporate level, which the Company refers to as "Shared Resources" in the table below. Shared Resource assets primarily consist of cash and property and equipment. Revenue between segments is immaterial.
Certain financial information for each of the Company's business segments is set forth below. All revenue amounts shown below are presented on an as corrected basis following the correction of an immaterial error identified in previously issued financial statements. Refer to Note 26 for additional details.

87

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(in thousands)
Revenue
 
 
 
 
 
Agriculture
$
726,793

 
$
689,854

 
$
734,283

Construction
301,989

 
293,860

 
317,126

International
232,723

 
208,892

 
150,288

Total
$
1,261,505

 
$
1,192,606

 
$
1,201,697

Income (Loss) Before Income Taxes
 
 
 
 
 
Agriculture
$
16,799

 
$
(3,678
)
 
$
(15,781
)
Construction
(4,400
)
 
(7,278
)
 
(5,875
)
International
5,160

 
2,205

 
(469
)
Segment income (loss) before income taxes
17,559

 
(8,751
)
 
(22,125
)
Shared Resources
(1,405
)
 
(5,688
)
 
(588
)
Total
$
16,154

 
$
(14,439
)
 
$
(22,713
)
Total Impairment
 
 
 
 
 
Agriculture
$
886

 
$
175

 
$
1,888

Construction
1,114

 
498

 
2,155

International
156

 

 
325

Segment impairment
2,156

 
673

 
4,368

Shared Resources

 

 
42

Total
$
2,156

 
$
673

 
$
4,410

Restructuring Costs
 
 
 
 
 
Agriculture
$
441

 
$
6,886

 
$
(120
)
Construction
(27
)
 
2,093

 
60

International

 
62

 

Segment impairment
414

 
9,041

 
(60
)
Shared Resources


 
1,458

 
379

Total
$
414

 
$
10,499

 
$
319

Interest Income
 
 
 
 
 
Agriculture
$
84

 
$
164

 
$
183

Construction
234

 
314

 
341

International
81

 
9

 
31

Segment interest income
399

 
487

 
555

Shared Resources
(73
)
 
9

 
12

Total
$
326

 
$
496

 
$
567

Interest Expense
 
 
 
 
 
Agriculture
$
4,272

 
$
5,781

 
$
11,201

Construction
6,308

 
7,750

 
10,196

International
3,313

 
2,510

 
2,884

Segment interest expense
13,893

 
16,041

 
24,281

Shared Resources
(19
)
 
958

 
(2,416
)
Total
$
13,874

 
$
16,999

 
$
21,865

 
 
 
 
 
 

88

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 
Year Ended January 31,
 
2019
 
2018
 
2017
 
(in thousands)
Depreciation and Amortization
 
 
 
 
 
Agriculture
$
4,997

 
$
5,411

 
$
6,128

Construction
13,652

 
14,297

 
15,288

International
1,804

 
1,366

 
1,394

Segment depreciation and amortization
20,453

 
21,074

 
22,810

Shared Resources
3,152

 
4,031

 
4,058

Total
$
23,605

 
$
25,105

 
$
26,868

Capital Expenditures
 
 
 
 
 
Agriculture
$
2,473

 
$
2,950

 
$
1,585

Construction
7,012

 
20,080

 
5,480

International
1,944

 
1,332

 
898

Segment capital expenditures
11,429

 
24,362

 
7,963

Shared Resources
522

 
1,753

 
4,462

Total
$
11,951

 
$
26,115

 
$
12,425

 
 
 
 
 
 
 
 
 
January 31, 2019
 
January 31, 2018
Total Assets
 
 
(in thousands)
Agriculture
 
 
$
316,224

 
$
400,017

Construction
 
 
227,261

 
211,154

International
 
 
170,187

 
126,251

Segment assets
 
 
713,672

 
737,422

Shared Resources
 
 
78,766

 
22,886

Total
 
 
$
792,438

 
$
760,308

NOTE 25 - SELECTED QUARTERLY FINANCIAL DATA (Unaudited)
The following reflects selected quarterly financial information for fiscal years 2019 and 2018 (see Note 26 for a discussion of the correction of an immaterial error to previously reported amounts of quarterly revenue for the first three quarters of fiscal 2019 and all quarterly periods of fiscal 2018).
 
2019
 
2018
 
First quarter
 
Second quarter
 
Third quarter
 
Fourth quarter
 
First quarter
 
Second quarter
 
Third quarter
 
Fourth quarter
 
(in thousands, except per share data)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Revenue - As Previously Reported
245,678

 
299,891

 
363,649

 
n/a
 
264,118

 
268,871

 
330,341

 
339,608

Corrections
(1,964
)
 
(2,660
)
 
(2,736
)
 
n/a
 
(3,057
)
 
(2,556
)
 
(2,489
)
 
(2,229
)
Revenue - As Corrected
243,714

 
297,231

 
360,913

 
359,647

 
261,061

 
266,315

 
327,852

 
337,379

Gross Profit
47,558

 
58,901

 
69,542

 
55,585

 
48,919

 
52,807

 
61,477

 
52,097

Net Income (Loss)
$
(1,588
)
 
$
5,180

 
$
10,776

 
$
(2,160
)
 
$
(5,932
)
 
$
(5,186
)
 
$
2,384

 
$
1,685

Earnings (Loss) per Share-Basic
(0.07
)
 
0.23

 
0.49

 
(0.10
)
 
(0.27
)
 
(0.24
)
 
0.11

 
0.08

Earnings (Loss) per Share-Diluted
(0.07
)
 
0.23

 
0.48

 
(0.10
)
 
(0.27
)
 
(0.24
)
 
0.11

 
0.08

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

89

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

In the fourth quarter of fiscal 2018, the Company recognized a net benefit from income taxes of $5.3 million consisting of the net benefit of $1.8 million from remeasuring domestic deferred tax assets and liabilities at the new federal statutory tax rate of 21% following enactment of the Tax Act on December 22, 2017, and a benefit of $3.5 million from the release of the valuation allowance previously recognized for deferred tax assets of our Ukrainian subsidiary. Further details of these tax matters are discussed in Note 17.
NOTE 26 - IMMATERIAL RESTATEMENT OF PRIOR PERIOD FINANCIAL STATEMENTS
The Company identified an immaterial error within its quarterly financial statements for the quarterly periods ended April 30, 2018, July 31, 2018 and October 31, 2018 of fiscal 2019, within its quarterly and annual financial statements for the fiscal year ended January 31, 2018, and within its annual financial statements for the fiscal year ended January 31, 2017. The identified error was the result of incorrectly eliminating certain internal parts and service transactions. The adjustments to correct for this error reduce total revenue and cost of revenue by less than 1.5% for each quarterly and annual period and impact the amounts of previously reported equipment, parts, service and rental and other revenue and cost of revenue amounts, but have no impact on total gross profit, operating or net income, earnings per share, or the consolidated balance sheets or statements of cash flows. Management of the Company has evaluated all relevant quantitative and qualitative factors and has concluded that the error is not material to the results of operations for any previously reported quarterly or annual period. The Company has restated its accompanying statements of operations to correct for this immaterial error for the fiscal years ended January 31, 2018 and 2017, and the interim financial information for the quarterly periods in fiscal 2019 and 2018 presented within Note 25 - Selected Quarterly Financial Data.
Included below is a summary of the previously reported amounts of revenue and cost of revenue, the impact of correcting for this immaterial error and the as-corrected amounts for the fiscal years ended January 31, 2018 and 2017:
 
Year Ended January 31,
 
2018
 
2017
 
As Previously Reported
 
Corrections
 
As Corrected
 
As Previously Reported
 
Corrections
 
As Corrected
 
(in thousands)
Revenue
 
 
 
 
 
 
 
 
 
 
 
Equipment
$
804,361

 
$
40,407

 
$
844,768

 
$
797,315

 
$
40,722

 
$
838,037

Parts
222,404

 
(19,173
)
 
203,231

 
233,819

 
(19,716
)
 
214,103

Service
117,318

 
(28,524
)
 
88,794

 
124,076

 
(29,668
)
 
94,408

Rental and other
58,855

 
(3,042
)
 
55,813

 
57,870

 
(2,721
)
 
55,149

Total Revenue
1,202,938

 
(10,332
)
 
1,192,606

 
1,213,080

 
(11,383
)
 
1,201,697

Cost of Revenue
 
 
 
 
 
 
 
 
 
 
 
Equipment
743,465

 
21,184

 
764,649

 
746,169

 
23,755

 
769,924

Parts
156,455

 
(12,726
)
 
143,729

 
164,020

 
(14,808
)
 
149,212

Service
44,141

 
(13,462
)
 
30,679

 
46,284

 
(14,794
)
 
31,490

Rental and other
43,577

 
(5,328
)
 
38,249

 
42,878

 
(5,536
)
 
37,342

Total Cost of Revenue
987,638

 
(10,332
)
 
977,306

 
999,351

 
(11,383
)
 
987,968

Gross Profit
$
215,300

 
$

 
$
215,300

 
$
213,729

 
$

 
$
213,729

NOTE 27 - SUBSEQUENT EVENTS
On January 1, 2019, the Company, through its German subsidiary, acquired certain assets of ESB Agrartechnik GmbH ("ESB"). ESB is a full-service agriculture equipment dealership in Eastern Germany. Our acquisition of ESB further expands our presence in the German market. The total consideration transferred for the acquired business was $3.0 million paid in cash. The business assets acquired consisted of $1.5 million in inventory, $0.8 million of other tangible assets, and $0.7 million of intangible assets. Due to the limited time since the acquisition, the estimated fair values of acquired assets are provisional estimates, but are based on the best information currently available. These provisional estimates are subject to change as the Company completes all remaining steps in finalizing the purchase price allocation. Acquisition-related transaction costs were

90

Table of Contents
TITAN MACHINERY INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

not material. This acquisition was recognized in the fiscal year ending January 31, 2020 as the acquisition occurred within our International Segment in which all entities maintain a calendar year reporting period.
In March 2019, the Company completed an assessment of its Enterprise Resource Planning ("ERP") application and concluded that the Company will begin the process to prepare for conversion to a new ERP application in fiscal 2020, with an anticipated implementation of the new ERP application in the first half of fiscal 2021. The Company has entered into a software licensing agreement with a third-party ERP provider. The new ERP application deploys the latest data-driven and mobile-enabled sales and support tools to improve employee efficiency and deliver an enhanced customer experience. Beginning in March 2019, the Company will prospectively adjust the useful life of its current ERP application such that it is fully amortized upon its replacement in fiscal 2021. The Company will amortize the remaining net book value of $8.7 million on a straight-line basis over the remaining estimated period of use.

91

Table of Contents

Schedule II—Valuation and Qualifying Accounts and Reserves
Titan Machinery Inc.
Classification
 
Beginning Balance
 
Additions Charged to Expenses
 
Additions from Business Combinations
 
Deductions for Write-offs, Net of Recoveries
 
Foreign Currency Translation Adjustments
 
Ending Balance
 
 
(in thousands)
Valuation reserve deduction from receivables:
 
 
 
 
 
 
 
 
 
 
 
 
Year Ended January 31, 2019
 
$
2,951

 
$
835

 
$
958

 
$
(1,173
)
 
$
(43
)
 
$
3,528

Year Ended January 31, 2018
 
3,630

 
2,333

 

 
(3,138
)
 
126

 
2,951

Year Ended January 31, 2017
 
3,591

 
3,399

 

 
(3,428
)
 
68

 
3,630


92

Table of Contents

ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A.    CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures. After evaluating the effectiveness of the Company's disclosure controls and procedures pursuant to Rule 13a-15(b) of the Securities Exchange Act of 1934 ("Exchange Act") as of the end of the period covered by this Form 10-K, our Chief Executive Officer and Chief Financial Officer, with the participation of the Company's management, have concluded that the Company's disclosure controls and procedures (as defined in Exchange Act Rule 13a-15(e)) are effective.
Management's Report on Internal Control Over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO"). Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of January 31, 2019.
Deloitte & Touche LLP, the independent registered public accounting firm that audited the consolidated financial statements included in this Form 10-K, has also audited our internal control over financial reporting as of January 31, 2019, as stated in their attestation report included in Item 8 of this Form 10-K.
Changes in Internal Control over Financial Reporting. There has not been any change in the Company's internal control over financial reporting (as defined in Exchange Act Rule 13a-15(f)) during its most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, the Company's internal control over financial reporting.
ITEM 9B.    OTHER INFORMATION
None.
PART III
ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Other than the information included in Part I of this Form 10-K under the heading "Executive Officers of the Registrant," the information required by Item 10 is incorporated by reference to the sections labeled "Board of Directors," "Corporate Governance" and "Section 16(a) Beneficial Ownership Reporting Compliance," all of which will appear in our definitive proxy statement for our 2019 Annual Meeting of Stockholders.
ITEM 11.    EXECUTIVE COMPENSATION
The information required by Item 11 is incorporated herein by reference to the sections labeled "Compensation Discussion and Analysis," "Compensation Committee Report," "Compensation Committee Interlocks and Insider Participation," "Executive Compensation," and "Non-Employee Director Compensation," all of which will appear in our definitive proxy statement for our 2019 Annual Meeting of Stockholders.
ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required by Item 12 is incorporated herein by reference to the sections entitled "Security Ownership of Principal Stockholders and Management" and "Executive Compensation - Equity Compensation Plan Information," both of which will appear in our definitive proxy statement for our 2019 Annual Meeting of Stockholders.

93

Table of Contents

ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by Item 13 is incorporated herein by reference to the sections entitled "Corporate Governance—Independence" and "Certain Relationships and Related Transactions," both of which will appear in our definitive proxy statement for our 2019 Annual Meeting of Stockholders.
ITEM 14.    PRINCIPAL ACCOUNTING FEES AND SERVICES
The information required by Item 14 is incorporated herein by reference to the section entitled "Fees of the Independent Registered Public Accounting Firm," which will appear in our definitive proxy statement for our 2019 Annual Meeting of Stockholders.
PART IV
ITEM 15.    EXHIBITS, FINANCIAL STATEMENT SCHEDULES
(a)
Documents filed as part of this report.
(1)
Financial Statements. The following financial statements are included in Part II, Item 8 of this Annual Report on Form 10-K:
Report of Deloitte & Touche LLP on Consolidated Financial Statements as of January 31, 2019 and 2018 and for each of the three years in the period ended January 31, 2019
Report of Deloitte & Touche LLP on Internal Control Over Financial Reporting as of January 31, 2019
Consolidated Balance Sheets as of January 31, 2019 and 2018
Consolidated Statements of Operations for each of the three years in the period ended January 31, 2019
Consolidated Statements of Comprehensive Income (loss) for each of the three years in the period ended January 31, 2019
Consolidated Statements of Stockholders' Equity for each of the three years in the period ended January 31, 2019
Consolidated Statements of Cash Flows for each of the three years in the period ended January 31, 2019
Notes to Consolidated Financial Statements
(2)
Financial Statement Schedules. The following consolidated financial statement schedule should be read in conjunction with the consolidated financial statements and Report of Deloitte & Touche LLP on the consolidated financial statements included in Part II, Item 8 of this annual report on Form 10-K:
Schedule II—Valuation and Qualifying Accounts and Reserves
All other financial statement schedules have been omitted, because they are not applicable, are not required, or the information is included in the Financial Statements or Notes thereto
(3)
Exhibits. See the Exhibit Index to our Form 10-K immediately following below:

94

Table of Contents

EXHIBIT INDEX
TITAN MACHINERY INC.
FORM 10-K
No.
 
Description
 
Certificate of Incorporation of the registrant, as amended (incorporated herein by reference to Exhibit 3.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 10, 2012, File No. 001-33866).
 
 
 
 
Bylaws of the registrant, as amended (incorporated herein by reference to Exhibit 3.2 of the registrant's Annual Report on Form 10-K filed with the Commission on April 16, 2009, File No. 001-33866).
 
 
 
 
Specimen Certificate representing shares of common stock of Titan Machinery Inc. (incorporated by reference to Exhibit 4.1 of the registrant's Amendment No. 6 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on December 3, 2007).
 
 
 
 
Indenture, dated as of April 24, 2012, by and between the registrant and Wells Fargo Bank, National Association, as Trustee (incorporated by reference to Exhibit 4.1 of the registrant's Current Report on Form 8-K filed with the Commission on April 24, 2012, File No. 001-33866).
 
 
 
 
Amended and Restated Employment Agreement, dated March 6, 2013, between David Meyer and the registrant (incorporated herein by reference to Exhibit 10.2 of the registrant's Annual Report on Form 10-K filed with the Commission on April 10, 2013, File No. 001-33866).**
 
 
 
 
Amendment dated March 1, 2014 to the Amended and Restated Employment Agreement, dated March 6, 2013, between David Meyer and the registrant (incorporated herein by reference to Exhibit 10.54 of the registrant's Annual Report on Form 10-K filed with the Commission on April 11, 2014).**
 
 
 
 
Amended and Restated Employment Agreement, dated September 4, 2015, between Mark Kalvoda and the registrant (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2015).**
 
 
 
 
Amendment dated September 1, 2016 to the Amended and Restated Employment Agreement, dated September 4, 2015 between Mark Kalvoda and the registrant (incorporated herein by reference to Exhibit 10.2 of the registrant’s Quarterly Report on Form 10-Q filed with the Commission on September 1, 2016).**
 
 
 
 
Executive Employment Agreement, dated September 5, 2018, between Bryan J. Knutson and the registrant (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 6, 2018).**
 
 
 
 
Agricultural Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).
 
 
 
 
Amendment to the Agricultural Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.4 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).
 
 
 
 
Construction Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

 
 
 
 
Amendment to the Construction Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

 
 
 
 
New Holland Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.5 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).
 
 
 
 
Amendment to the New Holland Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.6 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

 
 
 
 
Dealer Security Agreement dated April 14, 2003 between New Holland North America, Inc. and the registrant (incorporated herein by reference to Exhibit 10.14 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).
 
 
 
 
Dealer Security Agreements between CNH America LLC and the registrant (incorporated herein by reference to Exhibit 10.15 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).
 
 
 

95

Table of Contents

No.
 
Description
 
Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement, dated November 13, 2007, between CNH Capital America LLC and the registrant (incorporated herein by reference to Exhibit 10.25 of the registrant's Amendment No. 5 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on November 27, 2007).
 
 
 
 
Letter Agreement with CNH Capital America, LLC dated September 30, 2011, amending the November 13, 2007 Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 9, 2011, File No. 001-33866).
 
 
 
 
Letter Agreement with CNH Capital America, LLC dated November 20, 2012, amending the November 13, 2007 Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 6, 2012, File No. 001-33866).
 
 
 
 
Letter Agreement with CNH Capital America, LLC dated February 15, 2013, amending the November 13, 2007 Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement (incorporated herein by reference to Exhibit 10.49 of the registrant's Annual Report on Form 10-K filed with the Commission on April 10, 2013, File No. 001-33866).
 
 
 
 
Amendment dated December 8, 2014 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 10, 2014, File No. 001-33866).
 
 
 
 
Second Amendment dated March 31, 2016 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.17.5 of the registrant's Annual Report on Form 10-K filed with the Commission on April 13, 2016).
 
 
 
 
Amendment dated October 5, 2017 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 7, 2017).
 
 
 
 
Amendment dated April 1, 2018 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.8.7 of the registrant's Annual Report on Form 10-K filed with the Commission on April 6, 2018).
 
 
 
 
Amendment dated May 31, 2018 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.8.7 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 7, 2018).
 
 
 
 
Amendment dated November 30, 2018 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 6, 2018).
 
 
 
 
Amendment dated January 18, 2019 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC.
 
 
 
 
Second Amended and Restated Credit Agreement dated as of October 28, 2015 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto (incorporated by reference to Exhibit 10.1 of the registrant's Current Report on Form 8-K filed with the Commission on November 2, 2015).
 
 
 
 
Amendment No. 1 to Second Amended and Restated Credit Agreement dated December 29, 2015 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto (incorporated herein by reference to Exhibit 10.18.1 of the registrant's Annual Report on Form 10-K filed with the Commission on April 13, 2016).
 
 
 
 
Amendment No. 2 to Second Amended and Restated Credit Agreement dated March 25, 2016 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto (incorporated herein by reference to Exhibit 10.18.2 of the registrant's Annual Report on Form 10-K filed with the Commission on April 13, 2016).
 
 
 

96

Table of Contents

No.
 
Description
 
Amendment No. 3 to Second Amended and Restated Credit Agreement dated December 8, 2016 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto (incorporated herein by reference to Exhibit 10.17.3 of the registrant's Annual Report on Form 10-K filed with the Commission on April 7, 2017).
 
 
 
 
Amendment No. 4 to Second Amended and Restated Credit Agreement dated March 1, 2017 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto (incorporated herein by reference to Exhibit 10.17.4 of the registrant's Annual Report on Form 10-K filed with the Commission on April 7, 2017).
 
 
 
 
Amendment No. 5 to Second Amended and Restated Credit Agreement dated February 12, 2018 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto (incorporated herein by reference to Exhibit 10.9.5 of the registrant's Annual Report on Form 10-K filed with the Commission on April 6, 2018).
 
 
 
 
Amendment No. 6 to Second Amended and Restated Credit Agreement dated December 28, 2018 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto.
 
 
 
 
Amended and Restated 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.1 of the registrant's Current Report on Form 8-K filed with the Commission on June 6, 2011, File No. 001-33866).**
 
 
 
 
Form of Incentive Stock Option Agreement under the 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.22 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).**
 
 
 
 
Form of Non-Qualified Stock Option Agreement under the 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.23 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).**
 
 
 
 
Form of Restricted Stock Agreement under the 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.24 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).**
 
 
 
 
Titan Machinery Inc. 2014 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.1 of the registrant's Current Report on Form 8-K filed with the Commission on June 3, 2014, File No. 001-33866).**
 
 
 
 
 
 
 
Form of Titan Machinery Inc. Restricted Stock Agreement (for non-employee directors) under the 2014 Equity Incentive Plan, revised effective June 1, 2018.**
 
 
 
 
Form of Titan Machinery Inc. Restricted Stock Agreement under the 2014 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 5, 2014, File No. 001-33866).**
 
 
 
 
Form of Titan Machinery Inc. Restricted Stock Agreement under the 2014 Equity Incentive Plan, revised effective June 1, 2018. **
 
 
 
 
Form of Titan Machinery Inc. Restricted Stock Unit Agreement under the 2014 Equity Incentive Plan, used for purposes of granting awards to European employees (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2014).**
 
 
 
Form of Titan Machinery Inc. Restricted Stock Unit Agreement under the 2014 Equity Incentive Plan, used for purposes of granting awards to European employees, revised effective June 1, 2017. **
 
 
 
 
Form of Director and Officer Indemnification Agreement
 
 
 
 
Titan Machinery Inc. Non-Employee Director Compensation Plan (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2015).**
 
 
 
 
Description of Titan Machinery Inc.’s Executive Cash Bonus Plan (incorporated herein by reference to Exhibit 10.34 of the registrant’s Annual Report on Form 10-K filed with the Commission on April 15, 2015)**
 
 
 
 
Subsidiaries of Titan Machinery Inc.
 
 
 
 
Consent of Deloitte & Touche LLP
 
 
 

97

Table of Contents

No.
 
Description
 
Power of Attorney
 
 
 
 
Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
 
 
Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
 
 
 
Certification of Chief Executive Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
 
 
Certification of Chief Financial Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
 
 
101*
 
The following materials from Titan Machinery Inc.'s Annual Report on Form 10-K for the year ended January 31, 2019 formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Statements of Operations for the fiscal years ended January 31, 2019, 2018 and 2017, (ii) the Consolidated Statements of Operations for the fiscal years ended January 31, 2019, 2018 and 2017, (iii) the Consolidated Statements of Comprehensive Income (Loss) for the fiscal years ended January 31, 2019, 2018 and 2017, (iv) the Consolidated Statements of Stockholders' Equity for the fiscal years ended January 31, 2019, 2018 and 2017, (v) the Consolidated Statements of Cash Flows for the fiscal years ended January 31, 2019, 2018 and 2017, and (vi) the Notes to the Consolidated Financial Statements.
______________________________________________________
*
Filed herewith
**
Indicates management contract or compensatory plan or arrangement.
TEM 16.    FORM 10-K SUMMARY
Not applicable.

98

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Dated: April 5, 2019
TITAN MACHINERY INC.
By
 
/s/ DAVID J. MEYER
 
By
 
/s/ MARK KALVODA
 
 
David J. Meyer,
Board Chair and Chief Executive Officer
 
 
 
Mark Kalvoda,
 Chief Financial Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:
Signature
Title
Date
/s/ DAVID J. MEYER
Board Chair, Chief Executive Officer (principal executive officer)
 
April 5, 2019
David J. Meyer
 
 
 
 
 
 
/s/ MARK KALVODA
Chief Financial Officer (principal financial officer and principal accounting officer)
 
April 5, 2019
Mark Kalvoda
 
 
 
 
 
 
*
Director
 
 
Tony Christianson
 
 
April 5, 2019
 
 
 
 
*
Director
 
 
Stanley Dardis
 
 
April 5, 2019
 
 
 
 
*
Director
 
 
Stan Erickson
 
 
April 5, 2019
 
 
 
 
*
Director
 
 
Christine Hamilton
 
 
April 5, 2019
 
 
 
 
*
Director
 
 
John Henderson
 
 
April 5, 2019
 
 
 
 
*
Director
 
 
Jody Horner
 
 
April 5, 2019
 
 
 
 
*
Director
 
 
Richard Mack
 
 
April 5, 2019

*By
 
/s/ MARK KALVODA
 
 
 
Mark Kalvoda, Attorney-in-Fact
 

99