Titan Machinery Inc. - Annual Report: 2020 (Form 10-K)

/s/ DAVID J. MEYER

/s/ MARK KALVODA

David J. Meyer,
Board Chair and Chief Executive Officer

Mark Kalvoda,
Chief Financial Officer

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

___________________________________________

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

FOR THE FISCAL YEAR ENDED JANUARY 31, 2020

Commission File No. 001-33866

___________________________________________

TITAN MACHINERY INC.

(Exact name of registrant as specified in its charter)



Delaware (State or Other Jurisdiction of Incorporation or Organization)	No. 45-0357838 (IRS Employer Identification No.)

644 East Beaton Drive

West Fargo, ND 58078-2648

(Address of Principal Executive Offices)

(701) 356-0130

(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:



Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, $0.00001 par value per share	TITN	The Nasdaq Stock Market LLC

Securities registered pursuant to Section 12(g) of the Act: None

___________________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes x No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See definitions of "large accelerated filer," "accelerated filer," "smaller reporting company," and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one):



Large accelerated filer o				Accelerated filer x
Non-accelerated filer o				Smaller reporting company o
Emerging Growth Company o

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No x

The aggregate market value of our common stock held by non-affiliates as of July 31, 2019 was approximately $386.4 million (based on the last sale price of $20.74 per share on such date as reported on the NASDAQ Global Select Market).

The number of shares outstanding of the registrant's common stock as of March 31, 2020 was 22,335,152 shares.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the proxy statement for the registrant's 2020 Annual Meeting of Stockholders are incorporated by reference into Items 10, 11, 12, 13 and 14 of Part III of this report.

Table of Contents



		Page No.
	PART I
Item 1.	Business	1
Item 1A.	Risk Factors	9
Item 1B.	Unresolved Staff Comments	17
Item 2.	Properties	17
Item 3.	Legal Proceedings	18
Item 4.	Mine Safety Disclosures	19
	PART II
Item 5.	Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	19
Item 6.	Selected Financial Data	20
Item 7.	Management's Discussion and Analysis of Financial Condition and Results of Operations	23
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	43
Item 8.	Financial Statements and Supplementary Data	44
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	89
Item 9A.	Controls and Procedures	89
Item 9B.	Other Information	89
	PART III
Item 10.	Directors, Executive Officers and Corporate Governance	89
Item 11.	Executive Compensation	89
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	89
Item 13.	Certain Relationships and Related Transactions, and Director Independence	90
Item 14.	Principal Accounting Fees and Services	90
	PART IV
Item 15.	Exhibits, Financial Statement Schedules	90
Item 16.	Form 10-K Summary	94

We make available, free of charge, copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, on our website, http://www.titanmachinery.com, as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the Securities and Exchange Commission ("SEC"). We are not including the information on our website as a part of, or incorporating it by reference into, this Form 10-K.

Table of Contents

ITEM 1. BUSINESS

Our Company

Titan Machinery Inc. and its subsidiaries (collectively, "Titan Machinery," the "Company," "we," or "our") own and operate a network of full service agricultural and construction equipment stores in the United States and Europe. We have been an authorized dealer of CNH Industrial N.V. or its U.S. subsidiaries (collectively referred to in this Form 10-K as "CNH Industrial") since our inception in 1980. CNH Industrial is a leading manufacturer and supplier of agricultural and construction equipment, which includes the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. Based upon information provided to us by CNH Industrial, we are the largest retail dealer of Case IH Agriculture equipment in the world, the largest retail dealer of Case Construction equipment in North America and a major retail dealer of New Holland Agriculture and New Holland Construction equipment in the U.S. In addition to the CNH Industrial brands, we sell and service equipment made by a variety of other manufacturers.

We operate our business in three reportable segments, Agriculture, Construction and International, within which we engage in four principal business activities:


•	new and used equipment sales;


•	parts sales;


•	equipment repair and maintenance services; and


•	equipment rental and other activities.

We offer our customers a one-stop solution by providing equipment and parts sales, equipment repair and maintenance services, and rental functions in each store. Our full service approach provides us with multiple points of customer contact and cross-selling opportunities. We believe our mix of equipment sales and recurring parts and service sales, as well as our diverse geographic footprint, provide us with diversification, which we believe aids in reducing the risks we face associated with adverse economic cycles that affect particular geographic markets or segments. We also believe our scale, customer service, diverse and stable customer base, centralized resources, and experienced management team provide us with a competitive advantage in many of our local markets.

Throughout our 39-year operating history, we have built an extensive, geographically contiguous network of 74 stores in the U.S. and 33 stores in Europe. Our Agriculture stores in the U.S. are located in Iowa, Minnesota, Nebraska, North Dakota and South Dakota and include several highly productive farming regions, such as the Red River Valley in eastern North Dakota and northwestern Minnesota, portions of the corn belt in Iowa, eastern South Dakota and southern Minnesota, and along the I-80 corridor in Nebraska, which sits on top of the Ogallala Aquifer. Our Construction stores are located in Arizona, Colorado, Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota, Wisconsin and Wyoming. Our International stores are located in the European countries of Bulgaria, Germany, Romania, Serbia and Ukraine.

We have a history of growth through acquisitions. Since January 1, 2003, we have completed the acquisition of over 50 dealerships located in 11 U.S. states and four European countries, along with establishing new startup operations and a network of stores in Ukraine. We believe that there will continue to be opportunities for dealership consolidation in the future, and we expect that acquisitions will continue to be a component of our long-term growth strategy.

Products and Services

Within each of our segments, we have four principal sources of revenue: new and used equipment sales, parts sales, equipment repair and maintenance services, and equipment rental and other business activities.

New and Used Equipment Sales

We sell new agricultural and construction equipment manufactured under the CNH Industrial family of brands as well as equipment from a variety of other manufacturers. The used equipment we sell is primarily acquired through trade-ins from our customers. The agricultural equipment we sell and service includes machinery and attachments for uses ranging from large-scale farming to home and garden purposes. The construction equipment we sell and service includes heavy construction machinery, light industrial machinery for commercial and residential construction, road and highway construction machinery, and mining operations equipment. Equipment sales generate cross-selling opportunities by populating our markets with equipment in need of service and parts. Equipment revenue represented 70.3%, 72.1% and 70.8% of total revenue for the fiscal years ended January 31, 2020, 2019 and 2018.

Table of Contents

Parts Sales

We maintain an extensive in-house parts inventory to provide timely parts and repair and maintenance support to our customers. Our parts sales provide a relatively stable revenue stream that is less sensitive to economic cycles than our equipment sales. Parts revenue represented 17.9%, 16.7% and 17.0% of total revenue for the fiscal years ended January 31, 2020, 2019 and 2018.

Equipment Repair and Maintenance Services

We provide repair and maintenance services, including warranty repairs, for our customers' equipment. All of our stores have service bays staffed by trained service technicians. In addition, our technicians are able to make off-site repairs at customer locations. We provide proactive and comprehensive customer service by maintaining service histories for each piece of equipment owned by our customers, maintaining 24/7 service hours in times of peak equipment usage, providing on-site repair services, scheduling off-season maintenance activities with customers, notifying customers of periodic service requirements and providing training programs to customers in order to educate them on standard maintenance requirements. Our after-market repair and maintenance services have historically provided a high-margin, relatively stable source of revenue through changing economic cycles. Service revenue represented 7.6%, 6.9%, and 7.4% of total revenue for the fiscal years ended January 31, 2020, 2019 and 2018.

Equipment Rental and Other Business Activities

We rent equipment to our customers, primarily in the Construction segment, for periods ranging from a few days to seasonal rentals. We actively manage the size, quality, age and composition of our rental fleet and closely monitor and analyze customer demand and rate trends. We service our fleet through our on-site parts and services team, and market our rental equipment through our retail sales force. Our rental activities create cross-selling opportunities in equipment sales, including rent-to-own purchase options on our non-fleet rentals.

We provide ancillary equipment support activities such as equipment transportation, Global Positioning System ("GPS") signal subscriptions and other precision farming products, farm data management products, and CNH Industrial finance and insurance products.

Equipment rental and other revenue represented 4.2%, 4.3% and 4.7% of total revenue for the fiscal years ended January 31, 2020, 2019 and 2018.

Industry Overview

Agricultural Equipment Industry

Agricultural equipment is purchased primarily by commercial farmers for the production of crops used for food, fiber, feed grain and feedstock for renewable energy. Agricultural equipment is also purchased by "life-style farmers" and for home and garden applications, and for maintenance of commercial, residential and government properties. Deere & Company ("Deere"), CNH Industrial, and Agco Corporation ("AGCO") are the largest global manufacturers of agricultural equipment and they each manufacture a full line of equipment and parts that supply the primary machinery requirements of farmers. In addition to the major manufacturers, several short-line manufacturers produce specialized equipment that satisfies various niche requirements of farmers. Agricultural equipment manufacturers typically grant dealers in the U.S. defined sales and marketing territories with designated store locations to distribute their products.

We believe there are many factors that influence demand for agricultural equipment, parts and repair and maintenance services, including net farm income, commodity markets, production yields, tariffs and trade policies, interest rates, government policies, European Union subvention funds and individual European country subsidies, tax policies, local growing conditions, and general economic conditions. Any of these conditions can change materially in a short time period, creating volatility in demand for our products and services. Federal legislation, such as the Farm Bill, attempts to stabilize the agriculture industry through various policies including (i) commodity programs consisting of direct, counter-cyclical and price support payments to farmers; (ii) conservation programs; (iii) crop insurance programs; and (iv) disaster relief programs. For the past two growing seasons, the U.S. Federal government has furnished market facilitation program payments to farmers or ranchers to compensate for the adverse impact of U.S.-China trade policies, which payments have assisted our customers. We believe that these various federal policies reduce financial volatility in the agriculture industry and assist farmers in continuing to operate their farms during economic down cycles and through the adverse headwinds caused by trade policies and tariffs.

Construction Equipment Industry

Construction equipment is purchased primarily for use in commercial, residential and infrastructure construction, as well as for agriculture, demolition, mining, energy production and forestry operations. Caterpillar, Inc., Deere, Komatsu Ltd.,

Table of Contents

the Volvo Group, Terex Corporation, Doosan, and CNH Industrial are some of the largest global manufacturers of construction and industrial equipment. The market for construction equipment is segmented across multiple categories including earth moving, lifting, light industrial, asphalt and paving, and concrete and aggregate equipment. As with agricultural equipment, distribution of construction equipment in the U.S. is accomplished primarily through manufacturer authorized dealers.

CNH Industrial and industry reports show that demand for construction equipment in our markets is driven by several factors, including (i) public spending on roads, highways, sewer and water projects, and other public works projects; (ii) public and private expenditures for the energy and mining industries, which are driven in part by demand for fossil fuels, metals and other commodities; (iii) business conditions in the agriculture industry; and (iv) general economic and market conditions of the construction sector for residential and commercial buildings.

Business Strengths

We believe the following attributes are important factors in our ability to compete effectively and to achieve our long-term financial objectives:

Centralized Inventory Management

We believe our significant scale enables us to centrally manage our inventory, permitting us to more effectively manage inventory levels at each store while still providing a significant breadth of equipment and parts inventories to our customers throughout our footprint. Moreover, our floorplan financing capacity enables us to opportunistically purchase and carry inventory to satisfy market demands.

Superior Customer Service at the Local Level

Our centralization of numerous administrative functions better positions our employees in the field to focus on customer service. We believe that the following capabilities enable us to better service our customers:


•	our ability to staff a large number of highly-trained service technicians across our network of stores, which makes it possible to schedule repair services on short notice without affecting our technician utilization rates;


•	our ability to staff and leverage product and application specialists across our network of stores, which makes it possible to offer valuable pre-sale and aftermarket services, including equipment training, best practices education and precision farming technology support; and


•	our ability to innovate and lead our industry through initiatives such as precision farming and farm data management products and services, which provide our customers with the latest advances in technology and operating practices.

We spend significant time and resources training our employees to effectively service our customers in each of our local markets. Our training program involves active participation in all manufacturer-sponsored training programs, the use of industry experts for customized training programs, and a centralized training team to assist in training programs and the integration of newly-acquired dealerships. We also partner with several technical colleges to sponsor students who we plan to eventually employ as service technicians.

Ability to Act on Acquisition Opportunities

We believe that our experienced management team and access to capital enables us to be opportunistic in responding to accretive growth opportunities, primarily arising from the continued consolidation of the dealer network.

Superior Centralized Marketing Systems

Our shared resource group includes a professional marketing team that supports all aspects of brand and solution awareness, customer analytics and targeting, and lead generation through multichannel campaigns that typically incorporate digital marketing (email, website, search, social and syndication), direct mail, and regional and local advertising and sponsorships. Our marketing functions also drive increased customer engagement and loyalty through participation in trade shows and industry events and communication and coordination for local store open houses, service clinics, equipment demonstrations, product showcases and customer appreciation outings.

Ability to Attract and Retain Superior Employees.

We recognize that attracting and retaining talented employees is essential to achieving outstanding company performance. We strive to develop our employees through a structured training program, and to invest in our employees' development. In addition, we strive to implement a compensation system that rewards employees for high performance. We believe that our efforts in these areas will enable us to attract and retain superior employees, necessary for us to be successful in our industry.

Table of Contents

Diverse and Stable Customer Base Reduces Market Risk

Our large geographic footprint covering 11 U.S. states and five European countries provides a diversified customer base. We believe that this diverse customer base reduces the potential impact of risks associated with customer concentration and fluctuations in local market conditions. During fiscal 2020, none of our customers accounted for more than 1.0% of our total revenue. Revenue from customers located outside of the United States is primarily included in our International segment, which represented 18.1%, 18.4% and 17.5% of total consolidated revenue during fiscal 2020, 2019 and 2018. In addition, our large geographic footprint enables us to capitalize on crop diversification and disparate weather in growing regions, as well as local trends in residential, infrastructure and commercial construction.

Experienced Management Team

Our executive team is led by David Meyer, our Board Chair and Chief Executive Officer, who has over 40 years of industry experience. Our other executive team members, managers in the field, and equipment sales consultants also have extensive knowledge and experience in our industry. We compensate, develop and review our managers and sales employees based on an approach that aligns their incentives with the goals and objectives of our Company, including achievement of revenue, profitability, market share and balance sheet objectives. We believe the strength of our management team will improve our success in the marketplace.

Growth Strategy

We pursue the following growth strategies:

Increasing Same-Store Sales and Market Share

Increasing same-store sales and market share is one of our priorities. This type of growth both enhances our current period revenue and increases our potential future revenue during the life of the sold equipment as a result of the potential for recurring parts and service business. We seek to generate growth in same-store sales and market share through the following:


•	employing significant marketing and advertising programs, including targeted direct mailings, internet based marketing, advertising with targeted local media outlets, participation in and sponsorship of trade shows and industry events, our Titan Trader monthly magazine, and by hosting open houses, service clinics, equipment demonstrations, product showcases and customer appreciation outings;


•	supporting and providing customers with training on evolving technologies, such as precision farming and farm data management, which are difficult for small dealers to support;


•	maintaining state-of-the-art service facilities, mobile service trucks and trained service technicians to maximize our customers' equipment uptime through preventative maintenance programs and seasonal 24/7 service support; and


•	centrally managing our inventory to optimize the availability of equipment and parts for our customers.

Strategic Acquisitions

Since January 1, 2003, we have completed the acquisition of over 50 dealerships located in 11 U.S. states and four European countries. In addition, we have added dealership locations in Ukraine through new start-up operations. The agricultural and construction equipment industries are fragmented and consist of many relatively small, independent businesses serving discrete local markets. We believe a favorable climate for dealership consolidation will continue to exist in the future due to several factors, including the competitiveness of our industry, increased dealer capitalization requirements, increased sophistication and complexity of equipment and related technologies, increased expectations from our customers and our equipment suppliers, and the lack of succession alternatives for many current owners. We intend to pursue acquisitions with the objectives of entering new markets, consolidating distribution within our existing footprint, and strengthening our competitive position. We expect that opportunistic acquisitions will continue to be a component of our long-term growth strategy.

We regularly assess the acquisition landscape, evaluating potential acquisitions in terms of availability and alignment to our long-term growth strategy. Typically, we have acquired only the working capital and fixed assets that we believe are necessary to run an efficient store and we do not generally assume any indebtedness. On occasion, we have acquired all of the outstanding equity of a company. Acquisitions are typically financed with available cash balances, floorplan payable line of credit capacity, and long-term debt.

The consent of CNH Industrial is required to acquire any CNH Industrial dealership. Additionally, the consent of our lender group, consisting of a number of national and regional banks (the "Bank Syndicate"), is required for acquisitions meeting certain thresholds or other criteria as defined in our credit agreement (which credit agreement was formerly referred to

Table of Contents

as the "Wells Fargo Credit Agreement"). Effective as of April 3, 2020, we amended and restated the Wells Fargo Credit Agreement, which we now refer to as the "Bank Syndicate Credit Facility."

Suppliers

CNH Industrial—Case IH Agriculture, Case Construction, New Holland Agriculture and New Holland Construction

CNH Industrial is a publicly-traded, global leader in the agricultural and construction equipment industries. In 2019, CNH Industrial generated $13.7 billion in revenue from its equipment operations. CNH Industrial is the world's second largest manufacturer of agricultural equipment, manufacturing the Case IH Agriculture and New Holland Agriculture brands of equipment. Case IH Agriculture, recognized by the red color of its equipment, possesses over 170 years of farm equipment heritage. New Holland Agriculture, recognized by the blue color of its tractors and the yellow color of its harvesting and hay equipment, has over 120 years of farm equipment industry experience. The Case Construction and New Holland Construction brands are owned and operated by CNH Industrial.

In fiscal 2020, CNH Industrial supplied approximately 74% of the new equipment sold in our Agriculture segment, 70% of the new equipment sold in our Construction segment, and 62% of the new equipment sold in our International segment. In addition, CNH Industrial provides financing and insurance products and services to our end-user customers through its affiliate CNH Industrial Capital America, LLC ("CNH Industrial Capital").

Our relationship with CNH Industrial is more than a typical supply relationship; it is strategic for both our Company and CNH Industrial. In that regard, we believe that it is in each company's interest to maintain and develop the longstanding strong relationship we share.

Dealership Agreements

We have entered into separate dealership agreements with CNH Industrial to sell and service the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands (collectively the “CNH Industrial Dealer Agreements”). Separate CNH Industrial Dealer Agreements exist for each of our North American stores or store complexes, and for each of the European countries in which we operate. The structure of the North American and European agreements are very similar. Except as noted, the following discussion describes the North American CNH Industrial Dealer Agreements.

Each of the CNH Industrial Dealer Agreements assign to us a geographically defined area of primary responsibility, providing us with distribution and product support rights within the identified territory for specific equipment products. Although the dealer appointment is non-exclusive, in each territory there is typically only one dealer responsible for retail sales to end-users and for after-sales product support of the equipment. If we sell certain CNH Industrial construction equipment outside of our designated sales and service areas, CNH Industrial has the right to require that we pay sales and service fees for purposes of compensating the dealer assigned to such territory. We are authorized to display and use CNH Industrial trademarks and trade names at our stores, with certain restrictions.

Under our CNH Industrial Dealer Agreements, we have both the right and obligation to sell CNH Industrial equipment and related parts and products and to provide customers with repair services. The CNH Industrial Dealer Agreements impose various requirements on us regarding the location and appearance of facilities, satisfactory levels of new equipment and parts inventories, the training of personnel, adequate business enterprise and information technology system, adequate working capital, a maximum adjusted debt to tangible net worth ratio, development of annual sales and marketing goals, and furnishing of monthly and annual financial information to CNH Industrial. We must obtain the approval or consent of CNH Industrial in the event of proposed fundamental changes to our ownership, governance or business structure (defined as "change in control" events) including, among other things, (i) a merger, consolidation or reorganization, unless securities representing more than 50% of the total combined voting power of the successor corporation are immediately owned, directly or indirectly, by persons that owned our securities prior to the transaction; (ii) a sale of all or substantially all of our assets; (iii) any transaction or series of transactions resulting in a person or affiliated group acquiring 30% or more of the combined voting power of our securities or, in the case of a competitor of CNH Industrial, 20% or more of the combined voting power of our securities; (iv) a substantial disposition of shares of our common stock by certain named executives; (v) certain significant changes in the composition of our Board of Directors; and (vi) replacement of our Chief Executive Officer. The CNH Industrial Dealer Agreements do not establish mandatory minimum or maximum retail pricing for our equipment, parts, or service offerings.

The Case IH Agricultural dealership agreement and the Case Construction dealership agreement have fixed terms expiring on December 31, 2027, and renew automatically for successive 5-year terms unless either party notifies the other party of its intention not to renew or otherwise exercises its termination rights under the agreement. The New Holland dealership agreement is a 12-month agreement, with automatic 1-year renewals unless either party notifies the other party of its intention not to renew or otherwise exercises its termination rights under the agreement.

Table of Contents

CNH Industrial has the right to terminate its dealer agreements with us immediately in certain circumstances, including in the event of (i) our insolvency or bankruptcy, (ii) a material breach by us of the provisions of a CNH Industrial Dealer Agreement or (iii) our failure to secure the consent of CNH Industrial prior to the occurrence of a “change in control” event. The CNH Industrial Dealer Agreements governing Case Construction equipment grants CNH Industrial the right to terminate these CNH Industrial Dealer Agreements for any reason upon 120 days prior written notice. In addition, we have the right to terminate any of the CNH Industrial Dealer Agreements at any time, with or without cause, upon 60 days prior written notice. Subject to protections provided under state dealer protection laws, in the event that CNH Industrial offers a new dealer agreement or an amendment to the existing CNH Industrial Dealer Agreements to all authorized CNH Industrial dealers located in the state, CNH Industrial is permitted to terminate our existing CNH Industrial Dealer Agreements for stores located in that state upon at least 180 days prior written notice if we refuse or otherwise fail to enter into such new agreements or amendments. In addition, to the extent CNH Industrial determines that we are not meeting our obligations under the CNH Industrial Dealer Agreement with respect to a particular product, CNH Industrial may, upon 60 days prior written notice to us, remove such product from the authorized product list allowed to be sold or serviced by us. In the event of termination of any of the CNH Industrial Dealer Agreements, CNH Industrial is obligated to repurchase the inventory of the CNH Industrial brand applicable to the agreement being terminated. The CNH Industrial Dealer Agreements generally do not include non-compete provisions that apply during or after the term of such agreements or limit our operations apart from our designated CNH Industrial dealership store locations. Our CNH Dealer Agreements for Case Construction equipment, absent consent of CNH Industrial, restrict our ability to sell competing products (new equipment and parts) of other manufacturers at our Case dealership store locations during the term of such agreements. Our CNH Industrial Dealer Agreements require us to operate any material business activities not related to sales of CNH Industrial products or services to customers in agricultural, construction, industrial or similar markets separately from our CNH Industrial dealership business.

The CNH Industrial Dealer Agreements and industry practices generally provide that payment on equipment and parts purchased from CNH Industrial entities is due within 30 days, at which time the equipment inventory is then financed through one of our floorplan payable credit facilities. CNH Industrial makes available to us any floorplan programs, parts return programs, sales or incentive programs or similar plans or programs it offers to its other dealers, and provides us with promotional items and marketing materials.

The CNH Industrial Dealer Agreements for our European operations, with the exception of Ukraine, grant to us exclusive territories. We are restricted in our ability to sell competing products in our assigned territories. Our CNH Dealer Agreements of our European operations do not have a fixed term. CNH Industrial can terminate these agreements immediately in certain circumstances constituting cause, and for any reason upon twenty-four (24) months' prior written notice.

Other Suppliers

In addition to products supplied by CNH Industrial, we sell a variety of new equipment and parts supplied by other manufacturers. These products tend to address specialized niche markets and complement the CNH Industrial products we sell by filling gaps in the CNH Industrial line of products. We believe our offering of products for specialized niche markets supports our goal of being a one-stop solution for our customers' equipment needs at each of our stores. Approximately 30% of our total new equipment sales in fiscal 2020 resulted from sales of products manufactured by companies other than CNH Industrial, with our single largest manufacturer other than CNH Industrial representing approximately 2% of our total new equipment sales. The terms of our arrangements with these other suppliers vary, but most of the dealership agreements contain termination provisions allowing the supplier to terminate the agreement after a specified notice period, which is typically 30 days. Payment and financing practices with these other suppliers are similar to those practices described above with respect to the CNH Industrial entities.

Customers

Our North America agriculture customers vary from small, single machine owners to large farming operations, primarily in the states of Iowa, Minnesota, Nebraska, North Dakota and South Dakota. In fiscal 2020, no single agriculture customer accounted for more than 1.0% of our Agriculture revenue.

Our Construction customers include a wide range of construction contractors, public utilities, mining, forestry, energy companies, farmers, municipalities and maintenance contractors, primarily in the states of Arizona, Colorado, Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota, Wisconsin and Wyoming. They vary in size from small, single machine owners to large firms. In fiscal 2020, no single construction equipment customer accounted for more than 2.0% of our Construction revenue.

Our International customers vary from small, single machine owners to large farming operations, primarily in the European countries of Bulgaria, Germany, Romania, Serbia and Ukraine. We also sell Case construction equipment in Bulgaria and Romania. In fiscal 2020, no single international customer accounted for more than 3.0% of our International revenue.

Table of Contents

Floorplan Payable Financing

We attempt to maintain at each store, or have readily available at other stores in our network, sufficient new equipment inventory to satisfy customer demand. Inventory levels fluctuate throughout the year and tend to increase before the primary sales seasons for agricultural equipment. The cost of floorplan payable financing is an important factor affecting our financial results.

CNH Industrial Capital offers floorplan payable financing to CNH Industrial dealers to finance the purchase of inventory from CNH Industrial and for used equipment inventory purchased on trade-ins from our customers. CNH Industrial Capital provides this financing in part to enable dealers to carry representative inventories of equipment and encourage the purchase of goods by dealers in advance of seasonal retail demand. CNH Industrial Capital charges variable market rates of interest based on the prime rate on balances outstanding after any interest-free periods and receives a security interest in inventory and other assets. Interest-free periods are generally about four months in duration for both new and used agriculture and construction equipment. As of January 31, 2020, we had a $450.0 million floorplan credit facility with CNH Industrial Capital.

In addition to the CNH Industrial Capital floorplan line of credit, as of January 31, 2020, we also had a $140.0 million wholesale floorplan line of credit under the Wells Fargo Credit Agreement, and a $60.0 million credit facility with DLL Finance LLC that can be used to finance inventory purchases. Effective as of April 3, 2020, we amended and restated the Wells Fargo Credit Agreement (hereafter referred to as the "Bank Syndicate Credit Facility"), under which we have total borrowing capacity of $250.0 million, $185.0 million allocated to a floorplan line and $65.0 million allocated to an operating line. In addition, we have other lines of credit offered by various financial institutions as well as floorplan payable financing programs offered by manufacturers and suppliers, or their third party lenders, from which we purchase equipment inventory.

Sales and Marketing

We currently market our products and services through:


•	our sales employees, who operate out of our network of local stores and call on customers in the markets surrounding each store;


•	our area product support managers, and our store parts managers and service managers, who provide our customers with comprehensive after-market support;


•	our website;


•	local and regional advertising efforts, including broadcast, cable, print and web-based media; and


•	alternative channels, such as auctions, for selling our aged equipment inventories.

Equipment Sales Consultants and Centralized Support

Our equipment sales employees (who we refer to as "equipment sales consultants") perform a variety of functions, such as servicing customers at our stores, calling on existing customers, and soliciting new business at farming, construction and industrial sites. We develop customized marketing programs for our sales force by analyzing each customer group for profitability, buying behavior and product selection. All members of our sales force are expected to participate in internal and external manufacturer-sponsored training sessions to develop product and application knowledge, sales techniques and financial acumen. Our shared resources group provides centralized sales and marketing support for our field operations, and coordinates centralized media buys, strategic planning, sales support and training. In addition, we enable our regional and area managers and their sales teams to develop localized sales and marketing strategies.

Parts Managers and Service Managers

Our parts managers and service managers are involved in our efforts to market parts and service, taking advantage of our seasonal marketing campaigns in parts and service sales. As a group, they have won multiple awards from our suppliers for their efforts benefiting both our customers and our key suppliers.

Website

Our used equipment inventories are marketed on our website, www.titanmachinery.com, through an equipment search feature which allows users to search by equipment type, manufacturer, price and/or store. A picture of each piece of equipment is shown, along with the equipment specifications, price and store location. Parts manufactured by the CNH Industrial brands are marketed and can be purchased directly through our website. Other sales and financing programs are also marketed through our website. Finally, our website provides dealer locater search functions and provides the contact information for the various departments at each of our stores.

Table of Contents

Print, Broadcast and Web-Based Advertising Campaigns

Each year we initiate several targeted direct mail, print and broadcast advertising and marketing campaigns. CNH Industrial and other suppliers periodically provide us with advertising funds, which we primarily use to promote new equipment, parts and financing programs. We will continue to explore and launch additional sales channels as appropriate, including, for example, additional internet-based efforts.

Channels for Selling Aged Equipment Inventory

In certain circumstances, we sell aged equipment inventories through the use of alternative channels such as onsite and online auctions.

Competition

The agricultural and construction equipment sales and distribution industries are highly competitive and fragmented, with large numbers of companies operating on a regional or local scale. Our competitors range from multi-location, regional operators to single-location dealers and include dealers and distributors of competing equipment brands, including Deere, Caterpillar and the AGCO brands, as well as other dealers and distributors of the CNH Industrial family of brands. Competition among equipment dealers, whether they offer agricultural or construction products or both, is primarily based on the price, value, reputation, quality and design of the products, customer service including repair and maintenance service provided by the dealer, the availability of equipment and parts, and the accessibility of stores. While we believe we compete favorably on each of these competitive factors, our sales and margins may be impacted by (i) aggressive pricing competition by equipment manufacturers or their dealers, (ii) our ability to obtain higher service margins based on our service quality and reputation, and (iii) our ability to attract new and maintain existing customers based on the availability and quality of the products we offer and our local relationships and reputation.

We are one of the established regional-scale agricultural and construction equipment dealers in the U.S. and Europe. The number of other agricultural and construction equipment dealers operating on a regional scale is limited. Our primary regional-scale competitors include RDO Equipment Co., Butler Machinery, Ziegler Inc., Brandt Holdings Co., Wagner Equipment Co., 21st Century Equipment, LLC, AKRS Equipment, C & B Operations, LLC, and Van Wall Equipment.

Corporate Information

We were incorporated as a North Dakota corporation in 1980 and reincorporated in Delaware in December 2007 prior to our initial public offering. Our executive offices are located at 644 East Beaton Drive, West Fargo, ND 58078-2648. Our telephone number is (701) 356-0130. We maintain a website at www.titanmachinery.com. Our SEC filings are available on the Investor Relations page of our website or at www.sec.gov.

Intellectual Property

We have registered trademarks for certain names and designs used in our business and have trademark applications pending for certain others. We generally operate each of our stores under the Titan Machinery name. Case IH, Case and New Holland are registered trademarks of CNH Industrial, which we use in connection with advertisements and sales as authorized under our CNH Industrial Dealer Agreements. We also license trademarks and trade names from other suppliers of equipment to us.

Product Warranties

Product warranties for new equipment and parts are provided by the original equipment manufacturer ("OEM"). The term and scope of these warranties vary greatly by OEM and by product. At the time equipment is purchased, we also offer customers the option of purchasing extended warranty protection provided by the OEM or through various third-party warranty providers. We are paid by the OEM for repairs we perform on equipment under warranty. We generally sell used equipment "as is" and without OEM warranty unless the original warranty period has not expired and is transferable. We also offer extended warranty programs on certain used equipment through various third-party warranty providers.

Seasonality & Weather

The agricultural and construction equipment businesses are highly seasonal, which causes our quarterly results and our cash flow to fluctuate during the year. Our customers generally purchase and rent equipment in preparation for, or in conjunction with, their busy seasons. For farmers, the busy seasons are spring planting and fall harvesting. For Construction customers, the busy season is typically the second and third quarters of our fiscal year for much of our Construction footprint, subject to weather conditions. Our parts and service revenues are typically highest during our customers' busy seasons as well, due to the increased use of their equipment during this time, which generates the need for more parts and service work. Weather

Table of Contents

conditions impact the timing of our customers' busy times, which may cause our quarterly financial results to differ between fiscal years. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of funds from completed harvests and construction projects.

Seasonal weather trends, particularly severe wet or dry conditions, can have a significant impact on regional agricultural and construction market performance by affecting crop production yields and the ability to undertake construction projects. Weather conditions that adversely affect the agricultural or construction markets would have a negative effect on the demand for our products and services.

In addition, numerous external factors such as credit markets, commodity prices, production yields, and other circumstances may disrupt normal purchasing practices and buyer sentiment, further contributing to the seasonal fluctuations.

Employees

As of January 31, 2020, we employed 1,612 full-time and 118 part-time employees. Our employees are not covered by a collective bargaining agreement. We believe our relations with our employees are good.

Governmental Regulation

We are subject to numerous federal, state, and local rules and regulations, including regulations promulgated by the Environmental Protection Agency and similar state agencies, with respect to storing, shipping, disposing, discharging and handling hazardous materials and hazardous and non-hazardous waste. The environmental regulations applicable to us are associated with the repair and maintenance of equipment at our stores including the handling and disposal of oil, fluids, wastewater and solvent cleaners. Currently, none of our stores or operations exceeds small quantity generation status. Compliance with these rules and regulations has not had any material effect on our operations, nor do we expect it to in the future. Further, we have not made, and do not anticipate making, any material capital expenditures related to compliance with environmental regulations.

ITEM 1A. RISK FACTORS

We are substantially dependent upon CNH Industrial, our primary supplier of equipment and parts inventory.

The substantial majority of our business involves the sale and distribution of new equipment and after-market parts supplied by CNH Industrial and the servicing of equipment manufactured by CNH Industrial. In fiscal 2020, CNH Industrial supplied approximately 74% of the new equipment sold in our Agriculture segment, 70% of the new equipment sold in our Construction segment, and 62% of the new equipment sold in our International segment, and supplied a significant portion of our parts inventory.

In addition to being our primary supplier, CNH Industrial provides us with the following important inputs for our business:


•	Floorplan payable financing for the purchase of a substantial portion of our equipment inventory;


•	Retail financing used by many of our customers to purchase CNH Industrial equipment from us;


•	Reimbursement for warranty work performed by us pursuant to CNH’s product warranties;


•	Incentive programs and discount programs offered from time to time that enable us to price our products more competitively; and


•	Promotional and marketing activities on national, regional and local levels.

Our financial performance and future success are highly dependent on the overall reputation, brand and success of CNH Industrial in the agricultural and construction equipment manufacturing industries, including its ability to maintain a competitive position in product innovation, product quality, and product pricing, and its ability to continue to provide financing to both us and our retail customers, and warranty reimbursements for service work that we perform.

CNH Industrial may change or terminate our CNH Industrial Dealer Agreements.

We have entered into CNH Industrial Dealer Agreements under which we sell CNH Industrial’s branded agricultural and construction equipment, along with after-market parts and repair services. Subject to applicable state statutes that may govern the dealer-manufacturer legal relationship, CNH Industrial may terminate our CNH Industrial Dealer Agreements immediately in certain circumstances, following written notice and cure periods for certain breaches of the agreement, and for

Table of Contents

any reason under the Case Construction agreement following 120 days prior written notice. If CNH Industrial were to terminate all or any of its CNH Industrial Dealer Agreements with us, our business would be severely harmed.

Furthermore, CNH Industrial may unilaterally change its operating practices under the terms of its CNH Industrial Dealer Agreements with us to, among other things, change or authorize additional dealers in our sales and service areas, change its distribution system to the detriment of its dealers like us, limit our product offerings, and change pricing or delivery terms. If CNH Industrial were to change the terms of our CNH Industrial Dealer Agreements or its operating practices in a manner that adversely affects us, our business and results of operations would be harmed.

Our CNH Industrial Dealer Agreements impose obligations and restrictions on us.

Under our CNH Industrial Dealer Agreements, we are obligated to actively promote the sale of CNH Industrial equipment within our designated geographic areas of responsibility, fulfill the product warranty obligations of CNH Industrial (subject to CNH Industrial’s payment to us of the agreed upon reimbursement), maintain adequate facilities and workforce to service the needs of our customers, and maintain equipment and parts inventories at the level deemed necessary by CNH Industrial to meet sales goals as stated in the annual business plan mutually agreed upon by us and CNH Industrial, maintain adequate working capital, and maintain stores only in authorized locations. Our CNH Industrial Dealer Agreements do not provide us with exclusive dealerships in any territory (except in our European territories), and CNH Industrial could elect to authorize additional dealers in our market areas in the future, subject to state dealer protection laws.

Consent of CNH Industrial is required for certain material changes in our ownership, governance or business structure, including the acquisition by any person or group of persons of 30% or more of our outstanding stock or 20% or more of our outstanding stock if the person or group is a competitor of CNH Industrial. This requirement may have the effect of discouraging a sale or other change in control of the Company, including transactions that our stockholders might otherwise deem to be in their best interests.

The acquisition of additional CNH Industrial geographic areas of responsibility and store locations in our Agriculture, Construction and International segments requires the consent of CNH Industrial under our CNH Industrial Dealer Agreements, subject to contrary state dealer protection laws. CNH Industrial may decide to decline, in its sole discretion, to consent to any acquisition of an additional CNH Industrial store location we may pursue. If CNH Industrial is unwilling to consent to any future proposed acquisition of additional dealerships, our ability to execute on our acquisition strategy and to grow our business may be impaired. We cannot assume that CNH Industrial will consent to any acquisition of stores or dealerships that we may desire to make in the future.

Our CNH Industrial Dealer Agreements require us to operate any material business activities not related to sales of CNH Industrial products or services to customers in agricultural, construction, industrial or similar markets separately from our CNH Industrial dealership business. Our CNH Industrial Dealer Agreement for Case Construction equipment prohibits us from carrying other suppliers' products (new equipment and parts) at our Case Construction stores that are competitive with CNH Industrial's products. These restrictions may discourage or prevent us from pursuing business activities that we believe are in the best interests of our stockholders.

Our agricultural equipment, parts and service sales are affected by numerous market factors outside of our control.

Farmers' capital expenditures often follow a cyclical pattern, with increased capital investments typically occurring during boom cycles spurred by high net farm income and strong farmer balance sheets. The USDA has forecasted net farm income, a broad measure of farm profitability, to be $93.6 billion for calendar year 2019, which is approximately 18.1% above the average for the five-year period ended December 31, 2019. Net farm income is subject to numerous external factors that are beyond the control of the individual farmer such as commodity prices, import tariffs and other trade regulations including developments in U.S.-China trade relations, input costs, production yields, animal diseases and crop pests, federal crop insurance and subsidy programs. Net farm income also impacts farmland values, which causes overall farm wealth to increase or decrease, impacting farmers’ sentiment to make investments in equipment. The nature of the agricultural industry is such that a downturn in equipment demand can occur suddenly, resulting in negative impact on dealers including declining revenues, reduced profit margins, excess new and used equipment inventories, and increased floorplan interest expenses. These downturns may be prolonged, and during these periods, our revenues and profitability could be harmed. Demand for our parts and service, although not as cyclical as equipment purchases, also can be negatively affected in agricultural downturns and in regions affected by adverse weather or growing conditions which result in fewer acres planted or harvested.

Our construction equipment, parts and service sales are affected by numerous market factors outside of our control.

Our construction equipment customers primarily operate in the natural resource development, construction, transportation, agriculture, manufacturing, industrial processing and utilities industries, which industries generally are capital intensive and cyclical in nature. Many of our construction equipment customers are directly and indirectly affected by

Table of Contents

fluctuations in commodity prices in the agriculture, forestry, metals and minerals, petroleum and natural gas industries. Prolonged periods of low oil prices, natural gas prices and other commodity prices may cause reduced activity in these sectors which may result in decreased demand for our products and services by our customers operating in these industries.

Construction contractors' demand for our construction equipment, parts and repair services is affected by economic conditions at both a global and a local level. Economic conditions that negatively affect the construction industry, such as the tightening of credit standards which affect the ability of consumers or businesses to obtain financing for construction projects, could reduce our customers' demand for our construction equipment. The construction industry in many of our geographical areas has experienced periodic, and sometimes prolonged, economic down cycles, which negatively impacts sales of construction equipment in those markets. During these downturns our revenues and profitability could be harmed.

Actual or threatened epidemics, pandemics, outbreaks, or other public health crises could result in disruptions in our supply chain, decreased customer demand, lower oil and other commodity prices and volatility in the stock market and the global economy, which could materially and adversely impact our business, results of operations and financial condition.

Actual or threatened epidemics, pandemics, outbreaks, or other public health crises could materially and adversely impact or disrupt our operations, adversely affect the local economies where we operate and negatively impact our customers’ spending in the impacted regions or depending upon the severity, globally, which could materially and adversely impact our business, results of operations and financial condition. For example, since December 2019, a strain of novel coronavirus (“COVID-19”) surfaced in China and has spread into the United States, Europe and several other parts of the world, resulting in certain supply chain disruptions, volatilities in the stock market, lower oil and other commodity prices due to diminished demand, economic challenges for ethanol producers, and lockdown on international travels, all of which could adversely impact the global economy and result in decreased demand from our customers. There is significant uncertainty around the breadth and duration of the business disruptions related to COVID-19, as well as its impact on the U.S. economy. Moreover, an epidemic, pandemic, outbreak or other public health crisis, such as COVID-19, could adversely affect our ability to adequately staff and manage our business. The extent to which COVID-19 impacts our business, results of operations and financial condition will depend on future developments, which are highly uncertain, rapidly changing and cannot be predicted, including new information that may emerge concerning the severity of COVID-19 and the actions taken to contain it or treat its impact.

Our customers’ ability to obtain affordable financing is an important factor in their purchasing decisions, and directly affects our business.

The ability to obtain affordable financing is an important part of a customer's decision to purchase agricultural or construction equipment. As net farm income and farm wealth have decreased in recent years, the borrowing capacity of our farmer customers may have also decreased. Moreover, in a tighter credit environment, agricultural lenders may discourage their farmer customers from making non-essential capital expenditures.

Interest rate increases may make equipment purchases less affordable for customers and, as a result, our revenue and profitability may decrease. We are unable to anticipate the timing and impact of interest rate adjustments.

Changes in governmental policies may reduce demand for agricultural and construction equipment and cause our revenue to decline.

Changes in federal, state, and international agricultural policies could adversely affect sales of agricultural equipment. Government programs and subsidies that reduce economic volatility, incentivize agricultural equipment purchases, and enhance farm income positively influence farmers' demand for agricultural equipment. To the extent that future funding or farm programs available to individual farmers are reduced, or, in the case of the U.S. Federal government's market facilitation program, this program is not renewed, these changes could reduce demand for agricultural equipment and we could experience a decline in revenue. Government sponsored conservation programs could remove acres from agricultural production, reducing demand for our products and services. Changes in government spending on infrastructure projects could adversely affect the demand for construction equipment and we could experience a decline in revenue. The ability to export agricultural products is critical to our agriculture customers. As a result, tariffs and other government trade agreements, policies or regulations impacting or limiting the export or import of agricultural commodities, such as China's import tariffs, could have a material adverse effect on the international flow of agricultural and other commodities, which may cause a decrease in the demand for agricultural equipment. Furthermore, the U.S. federal government has initiated tariffs, such as the current steel tariff, on certain foreign goods, including raw materials, commodities, and products manufactured outside the United States that are used in our manufacturers’ production processes. These tariffs could in turn increase our cost of sales as a result of price increases implemented by our domestic suppliers, which we may not be able to pass on to our customers.

Table of Contents

The equipment distribution market is subject to supply-demand imbalances arising from factors over which we have no control.

Over-production of equipment by one or more manufacturers, or a sudden reduction in demand for equipment, can dramatically disrupt the equipment market and cause downward pressure on our equipment profit margins. Customer leasing arrangements in the agriculture and construction equipment industries may also impact the level of industry-wide equipment inventory supplies. When leased equipment comes off lease, there may be an increase in the availability of late-model used equipment, which can create an inventory over-supply condition and put pressure on our equipment sales and margins, and have an adverse effect on values of our used equipment inventory and rental fleet equipment. Similarly, rental house companies engage in regular sales of rental fleet units, which can further disrupt the supply-demand balance. However, we have no control over or ability to significantly influence any of the foregoing inputs into the equipment distribution markets, but expect that we will be subject to the negative impact, including downward pressure on equipment profit margins, resulting from any supply-demand imbalances arising therefrom.

Our financial performance is dependent on our ability to effectively manage our inventory.

Our agricultural and construction equipment dealership network requires substantial inventories of equipment and parts to be maintained at each store and company-wide to facilitate sales to customers on a timely basis. Our equipment inventory has traditionally represented 50% or more of our total assets. We need to maintain a proper balance of new and used equipment to assure satisfactory inventory turnover and to minimize floorplan financing costs.

Our purchases of new equipment and parts are based primarily on projected demand. If actual sales are materially less than our forecasts, for example, because of the unexpected effects on consumer demand caused by COVID-19, we would experience an over-supply of new equipment inventory. An over-supply of new equipment inventory will generally cause downward pressure on our product sale prices and margins, decrease our inventory turns, and increase our floorplan financing expenses.

Our used equipment is generally acquired as “trade-ins” from customers in connection with equipment sales to those customers. Equipment inventories are stated at the lower of cost or market value. Adjustments to market value of inventory are recognized as a cost of sales, negatively impacting earnings, in the periods in which they occur. Our estimates of market value for our used equipment, as determined at the time of the trade-in, may prove to be inaccurate, given the potential for sudden change in market conditions and other factors beyond our control. Changes from our normal retail marketing channel to more aggressive marketing channels for specific pieces or categories of equipment inventory, particularly as equipment inventory ages, will generally result in lower sales prices. Pricing and sales of used equipment can be significantly affected by the limited market for certain types of used equipment.

Our international operations expose us to additional risks.

We currently operate dealership locations in Bulgaria, Germany, Romania, Serbia and Ukraine. In fiscal 2020, total International segment revenues were 18.1% of our consolidated total revenue. As of January 31, 2020, total International segment assets were 19.6% of our consolidated total assets.

Our operations in international markets subject us to risks related to the differing legal, political, social and regulatory environments and economic conditions in the countries in which we operate. Risks inherent in our international operations include:


•	difficulties in implementing our business model in foreign markets;


•	costs and diversion of domestic management attention related to oversight of international operations;


•	unexpected adverse changes in export duties, quotas and tariffs and difficulties in obtaining import licenses;


•	cyclicality of demand in European Union member states for agricultural equipment, based on availability of European Union government subsidy programs and tax incentives;


•	unexpected adverse changes in foreign laws or regulatory requirements;


•	compliance with a variety of tax regulations, foreign laws and regulations;


•	compliance with the Foreign Corrupt Practices Act and other U.S. laws that apply to the international operations of U.S. companies which may be difficult and costly to implement and monitor, can create competitive disadvantages if our competitors are not subject to such laws, and which, if violated, may result in substantial financial and reputational harm;

Table of Contents


•	fluctuations in foreign currency exchange rates to which we are exposed may adversely affect the results of our operations, the value of our foreign assets and liabilities and our cash flows;


•	the laws of the European countries in which we operate, unlike U.S. states, do not include specific dealer protection laws and, therefore, we may be more susceptible to actions of suppliers that are adverse to our interests such as termination of our dealer agreements for any reason or installing additional dealers in our designated territories; and


•	geo-political or economic instability.

Any escalation of political tensions or economic instability in Ukraine, including as a result of heightened tensions between Ukraine and the Russian Federation, could create significant disruption in our Ukrainian operations and may have an adverse effect on our business operations in Ukraine. Previous periods of political tension and economic instability in Ukraine caused liquidity problems for our customers, which negatively impacted their purchasing decisions for our products and services, limited our ability to maintain working capital loans or increased the cost of maintaining such loans, and as a result of imposed currency exchange controls, restricted our ability to manage our cash held in Ukraine and our investment in our Ukrainian business. Our operations in Ukraine are subject to the risks of further devaluation of the local currency, increased interest rates and increased inflation.

These factors, in addition to others that we have not anticipated, may negatively impact our financial condition and results of operations.

Floorplan financing for our equipment inventory may not be available on favorable terms, which would adversely affect our growth and results of operations.

We generally purchase our equipment with the assistance of floorplan payable financing programs through CNH Industrial Capital and our other credit facilities. In the event that our available financing sources are insufficient to satisfy our future requirements, we would be required to obtain financing from other sources. We may not be able to obtain this additional or alternative financing on commercially reasonable terms or at all. To the extent that this financing cannot be obtained on commercially reasonable terms or at all, our growth and results of operations would be adversely affected.

Our level of indebtedness could limit our financial and operational flexibility.

As of January 31, 2020, our indebtedness included floorplan payable financing, real estate mortgage financing arrangements that are secured by real estate assets and other long-term debt. In addition, we have obligations under our lease agreements for our store locations and corporate headquarters.

Our level of indebtedness could have important consequences. For example, it could:


•	increase our vulnerability to general adverse economic and industry conditions;


•	limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate; and


•	limit our ability to obtain additional financing for working capital, capital expenditures, acquisitions or general corporate purposes.

We expect to use cash flow from operations and borrowings under our credit facilities to fund our operations, debt service and capital expenditures. However, our ability to make these payments depends on our future performance, which will be affected by financial, business, economic and other factors, many of which may be beyond our control.

The credit agreements governing our indebtedness restrict our ability to engage in certain corporate and financial transactions, and require us to satisfy financial covenants.

The credit agreements governing our indebtedness contain covenants that, among other things, may limit or place conditions on our ability to:


•	incur more debt;


•	make investments;


•	create liens;


•	merge, consolidate, or make certain acquisitions;


•	transfer and sell assets;


•	pay dividends or repurchase stock; and


•	issue equity instruments.

Table of Contents

Our credit facilities with CNH Industrial Capital and DLL Finance require us to satisfy a net leverage ratio and fixed charge coverage ratio on an ongoing basis, measured at the end of each fiscal quarter. Under the Bank Syndicate Credit Facility, if our excess availability (i.e., borrowing base capacity less outstanding loan balance and certain reserves) falls below a certain threshold, we become subject to a minimum fixed charge coverage ratio. Our ability to borrow under these credit agreements depends upon compliance with these financial covenants.

Our failure to satisfy any covenant, absent a waiver or amendment, would cause us to be in default under our credit facilities and would enable our lenders to accelerate payment of the outstanding indebtedness. Each of our credit agreements include cross-default provisions which state that certain types of defaults under any other indebtedness agreement will also constitute a default under that credit agreement. If an event of default occurred, and the lender demanded accelerated payment, we may not be able to satisfy a pay-off request, whether through internal funds or a new financing.

Our variable rate indebtedness exposes us to interest rate risk.

A substantial portion of our floorplan and working capital borrowings, including the credit facilities with CNH Industrial Capital, the Bank Syndicate, DLL Finance, and our international floorplan facilities are at variable rates of interest and expose us to interest rate risk. As such, our results of operations are sensitive to movements in interest rates. There are many economic factors outside our control that have in the past and may, in the future, impact rates of interest including publicly announced indices that underlie the interest obligations related to a certain portion of our debt. Factors that impact interest rates include governmental monetary policies, inflation, recession, changes in unemployment, the money supply, and international instability impacting domestic and foreign financial markets. Any increases in interest rates could have a material adverse effect on our financial conditions and results of operations.

Changes affecting the availability of the London Interbank Offered Rate (“LIBOR”) may have consequences for the Company that cannot yet reasonably be predicted.

The Company has outstanding credit facilities, including the Bank Syndicate Credit Facility and the Company’s credit facility with DLL Finance, with variable interest rates based on LIBOR. The LIBOR benchmark has been subject of national, international, and other regulatory guidance and proposals for reform. In July 2017, the U.K. Financial Conduct Authority announced that it intends to stop persuading or compelling banks to submit rates for calculation of LIBOR after 2021. These reforms may cause LIBOR to perform differently than in the past and LIBOR may ultimately cease to exist after 2021. Alternative benchmark rate(s) may replace LIBOR and could affect the Company’s credit facilities. At this time, it is not possible to predict the effect of any changes to LIBOR, any phase out of LIBOR or any establishment of alternative benchmark rates. Any new benchmark rate will likely not replicate LIBOR exactly. Any changes to benchmark rates may have an uncertain impact on our cost of funds and our access to the capital markets, which could impact our results of operations and cash flows.

We are in the process of implementing a new enterprise resource planning (“ERP”) system, and problems with the design or implementation of this ERP system could interfere with our business and operations.

We are engaged in the implementation of a new ERP system. The ERP system is designed to accurately maintain the Company’s books and records and provide information to the Company’s management team important to the operation of our business. The Company’s ERP transition has required, and will continue to require, the investment of significant human and financial resources. We may not be able to successfully implement the ERP transition without experiencing delays, increased costs and other difficulties. Beyond cost and scheduling, potential flaws in the implementation of an ERP system may pose risks to the Company’s ability to operate successfully and efficiently, including timely and accurate SEC filings. If we are unable to successfully implement the new ERP system as planned, our financial position, results of operations and cash flows could be negatively impacted.

The agricultural and construction equipment industries are highly seasonal, which can cause significant fluctuations in our results of operations and cash flow.

The agricultural and construction equipment businesses are highly seasonal, which causes our quarterly results to fluctuate during the year. Farmers generally purchase agricultural equipment and service work in preparation for, or in conjunction with, the spring planting and fall harvesting seasons. Construction equipment customers’ purchases of equipment and service work, as well as rental of equipment, are also seasonal in our stores located in colder climates where construction work slows significantly in the winter months. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of farmers’ funds from completed harvests and construction customers' funds from completed projects. Also, numerous external factors such as credit markets, commodity prices, weather conditions, and other circumstances may disrupt normal purchasing practices and customers’ sentiment, further contributing to the seasonal fluctuations.

Table of Contents

Weather conditions may negatively impact the agricultural and construction equipment markets and affect our financial results.

Weather conditions, particularly severe floods and droughts, can have a significant adverse effect on growing conditions and on regional agricultural and construction markets. Adverse weather conditions may result in fewer acres being planted or harvested by farmers and reduced crop yields on those acres that are planted. Accordingly, our financial condition and results of operations may be adversely affected by adverse weather conditions.

Our rental operations subject us to risks including increased maintenance costs as our rental fleet ages, increased costs of new replacement equipment we use in our fleet, and losses upon disposition of rental fleet units.

Our rental fleet margins are materially impacted by utilization of fleet assets, which is seasonal and can fluctuate materially due to weather and economic factors. If our rental equipment ages, the costs of maintaining that equipment, if not replaced within a certain period of time, will likely increase. The cost of new equipment for use in our rental fleet could also increase due to increased material costs for our suppliers or other factors beyond our control. Furthermore, changes in customer demand could cause some of our existing equipment to become obsolete and require us to purchase new equipment at increased costs.

Upon the sale of a rental fleet unit, we include in operating income the difference between the sales price and the depreciated value of the equipment sold. The market value of any given piece of rental equipment could be less than its depreciated value at the time it is sold. The market value of used rental equipment depends on several factors, including:


•	market prices for like equipment;


•	hours and condition of the equipment;


•	time of year that the equipment is sold;


•	the supply of used equipment in the market; and


•	general economic conditions.

Any significant decline in the selling prices for used rental equipment, or increased costs resulting from our rental operations, could have a material adverse effect on our results of operation and cash flow.

Our industry is highly competitive.

The agricultural and construction equipment distribution (including parts and service) and rental industries are highly competitive and fragmented, with large numbers of companies operating on a regional or local basis. Historically, our competitors have competed aggressively on the basis of pricing or inventory availability, resulting in decreased margins on our sales to the extent we choose to match our competitors' pricing. To the extent we choose not to match or remain within a reasonable competitive distance from our competitors' pricing, we may lose sales volume and market share. In addition, to the extent CNH Industrial's competitors (such as Deere, Caterpillar, Komatsu, Volvo, and AGCO) provide their dealers with more innovative or higher quality products, better customer financing, or have more effective marketing programs or the CNH Industrial reputation or brand are tarnished in the marketplace or with our customers, our ability to compete and our results of operations could be adversely affected. In addition, e-commerce companies selling parts have negatively impacted dealers' parts sales and margins, and it is expected that this competitive pressure will only continue to increase in the future.

If our acquisition plans are unsuccessful, we may not achieve our planned long-term revenue growth.

Our ability to grow through the acquisition of additional CNH Industrial geographic areas of responsibility and store locations or other businesses will be dependent upon the availability of suitable acquisition candidates at acceptable values, our ability to compete effectively for available acquisition candidates and the availability of capital to complete the acquisitions. We may not successfully identify suitable targets, or if we do, we may not be able to close the transactions, or if we close the transactions, they may not be profitable. In addition, CNH Industrial's consent is required for the acquisition of any CNH Industrial dealership, and the consent of our lenders may be required for certain acquisitions. CNH Industrial typically evaluates management, historical performance, and capitalization of a prospective acquirer in determining whether to consent to the sale of a CNH Industrial dealership. There can be no assurance that CNH Industrial or our lenders will consent to any acquisitions of dealerships that we may propose.

Our acquisitions may not be successful.

There are risks associated with acquisitions of new dealerships. These risks include incurring significantly higher than anticipated capital expenditures and operating expenses; failing to assimilate the operations and personnel of the acquired dealerships; disrupting our ongoing business; diluting the effectiveness of our management; failing to maintain uniform

Table of Contents

standards, controls and policies; and impairing relationships with employees and customers as a result of changes in management. To the extent we do not successfully avoid or overcome the risks or problems related to acquisitions, our results of operations and financial condition could be adversely affected. Future acquisitions also may have a significant impact on our financial position and capital needs, and could cause substantial fluctuations in our quarterly and yearly results of operations. Acquisitions could include significant goodwill and intangible assets, which may result in future impairment charges that would reduce our stated earnings.

We are exposed to customer credit risks.

We extend credit to our customers for parts and service work, rental charges, and also for some equipment sales in our domestic and international operations. If we are unable to manage credit risk issues adequately, or if a large number of customers should have financial difficulties at the same time, our credit losses could increase above historical levels and our operating results would be adversely affected. Delinquencies and credit losses generally would be expected to increase if there was a worsening of economic conditions.

Our business success depends on attracting and retaining qualified personnel.

Our success in executing our operating and strategic plans depends on the efforts and abilities of our management team and key employees, including the managers of our field operations and our country managers in our International operations. The failure to attract and retain members of our management team and key employees will harm us.

Over the past several months, the equipment industry has experienced a shortage of qualified service technicians. If this trend worsens and we are not able to hire and retain qualified service technicians at acceptable levels, our ability to satisfy customers' service needs would be negatively impacted. Moreover, the technician shortage may increase our service technician compensation expense, and reduce our gross margins on service work.

Selling and renting agricultural and construction equipment, selling parts, and providing repair services subject us to liability risks that could adversely affect our financial condition and reputation.

Products sold, rented or serviced by us may expose us to potential liabilities for personal injury or property damage claims that arise from the use of such products. Our commercial liability insurance may not be adequate to cover significant product liability claims, or we may not be able to secure such insurance on economically reasonable terms. An uninsured or partially insured claim for which indemnification from the manufacturer is not available could have a material adverse effect on our financial condition. Furthermore, if any significant claims are made against us or against CNH Industrial or any of our other suppliers, our business may be adversely affected by any related negative publicity or any adverse impact on the reputation or brand of any of our suppliers, including CNH Industrial.

Labor organizing and other activities could negatively impact us.

The unionization of all or a substantial portion of our workforce could result in work slowdowns or stoppages, could increase our overall costs, could reduce our operating margins and reduce the efficiency of our operations at the affected locations, could adversely affect our flexibility to run our business competitively, and could otherwise have a material adverse effect on our business, financial condition and results of operations.

Our common stock price has fluctuated significantly and may continue to do so in the future.

The price at which our common stock trades may be volatile and could be subject to significant fluctuations in response to our operating results and financial condition as set forth in our earnings releases, guidance estimates released by agricultural or construction equipment manufacturers that serve the markets in which we operate, announcements by our competitors, analyst recommendations, our ability to meet or exceed analysts’ or investors’ expectations, fluctuations in the price of crop commodities and natural resources, the condition of the financial markets, and other factors. Quarterly fluctuations resulting from the seasonality of our business may cause our results of operations and cash flows to underperform in relation to our quarterly modeling assumptions or the expectations of financial analysts or investors, which may cause volatility or decreases in our stock price.

The Company’s stock price is dependent in part on the multiple of earnings that investors are willing to pay. That multiple is in part dependent on investors’ perception of the Company’s future earnings growth prospects. If investors’ perception of the Company’s earnings growth prospects change, the Company’s earnings multiple may decline, and its stock price could be adversely affected.

In addition, the stock market in recent years has experienced extreme price and volume fluctuations that often have been unrelated or disproportionate to the operating performance of companies. These fluctuations, as well as general economic and market conditions, may adversely affect the market price of our common stock notwithstanding our actual operating performance.

Table of Contents

Security breaches and other disruptions could compromise our information and expose us to liability, which would cause our business and reputation to suffer.

The efficient operation of our business is dependent on our information technology systems. We use information technology systems to record, process and summarize financial information and results of operations for internal reporting purposes and to comply with regulatory financial reporting, legal and tax requirements. Additionally, in the ordinary course of our business, we collect and store sensitive data, including proprietary business information, of our customers and suppliers, as well as personally identifiable information of our customers and employees, in our data centers and on our networks. The secure operation of these information technology networks and the systems of the third parties with whom we do business and the processing and maintenance of information is critical to our operations. Despite our and the third parties with whom we do business' security measures and business continuity plans, our information technology and infrastructure may be vulnerable to damage, disruptions or shutdowns due to attacks by hackers or breaches due to employee error or malfeasance or other disruptions arising from power outages, telecommunication failures, terrorist acts, natural disasters, or other catastrophic events. The occurrence of these events could compromise our networks, and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability or regulatory penalties under laws that protect the privacy of personally identifiable information, disrupt our operations, and damage our reputation, which could adversely affect our business, results of operations, and financial condition. In particular, given our Europe operations, the European Union General Data Protection Regulation imposes stringent data protection requirement and provides significant penalties for noncompliance. In addition, as security threats continue to evolve and increase in frequency and sophistication, we may need to invest additional resources to protect the security of our systems.

We maintain cyber risk insurance, but this insurance may not be sufficient to cover all of our losses from any future breaches of our systems.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

Equipment Stores

As of January 31, 2020, we operate 107 agricultural and construction equipment stores in the United States and Europe in the following locations.



	Agriculture Segment	Construction Segment	International Segment	Total
US States
North Dakota	10	5	—	15
Minnesota	10	3	—	13
Iowa	10	3	—	13
Nebraska	11	2	—	13
South Dakota	8	2	—	10
Colorado	—	3	—	3
Montana	—	3	—	3
Arizona	—	2	—	2
Wisconsin	—	1	—	1
Wyoming	—	1	—	1
European Countries
Bulgaria	—	—	7	7
Germany	—	—	5	5
Romania	—	—	12	12
Ukraine	—	—	8	8
Serbia	—	—	1	1
Total	49	25	33	107

Table of Contents

Store Lease Arrangements

As of January 31, 2020, we leased 94 store facilities with lease arrangements expiring at various dates through January 31, 2031. Many of our lease agreements include fair market value purchase options, rights of first refusal, lease term extension options, or month-to-month or year-to-year automatic renewal provisions at the conclusion of the original lease period. A majority of the leases provide for fixed monthly rental payments and require us to pay the real estate taxes on the properties for the lease periods. We are generally responsible for utilities and maintenance of the leased premises. All of the leases require that we maintain public liability, property casualty, and personal property insurance on each of the leased premises. The leases generally require us to indemnify the lessor in connection with any claims arising from the leased premises during our occupation of the property. We believe our facilities are adequate to meet our current and anticipated needs.

As part of our due diligence review prior to a dealership acquisition, we evaluate the adequacy, suitability and condition of the related real estate. Our evaluation typically includes a Phase I environmental study, and if deemed necessary, a Phase II environmental study, of the real property to determine whether there are any environmental concerns. If any environmental concerns exist, we generally require that such concerns be addressed prior to acquisition of the dealership.

We have not historically owned significant amounts of real estate, although we evaluate opportunities to invest in our real estate on a case by case basis. We currently own the store facilities for 9 U.S. dealership locations and 4 Germany dealership locations. We have incurred debt financing and granted mortgages on these owned facilities. The remainder of our U.S. and international store locations are leased from third parties.

Headquarters

We currently lease and occupy approximately 48,000 square feet in West Fargo, North Dakota for our headquarters, this lease expires on January 31, 2028. We continually review our location needs, including the adequacy of our headquarters space, to ensure our space is sufficient to support our operations. We believe there is ample opportunity for expansion in our West Fargo headquarters facility if necessary.

ITEM 3. LEGAL PROCEEDINGS

We are, from time to time, subject to claims and suits arising in the ordinary course of business. Such claims have, in the past, generally been covered by insurance. Management believes the resolution of other legal matters will not have a material effect on our financial condition, results of operation or cash flow, although the ultimate outcome of any such actions is not assured. Furthermore, our insurance may not be adequate to cover all liabilities that may arise out of claims brought against us.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

Table of Contents

INFORMATION ABOUT OUR EXECUTIVE OFFICERS

The names, ages and positions of our executive officers are as follows:



Name	Age	Position
David Meyer	66	Board Chair and Chief Executive Officer
Mark Kalvoda	48	Chief Financial Officer and Treasurer
Bryan Knutson	41	Chief Operating Officer

David Meyer is our Board Chair and Chief Executive Officer. Mr. Meyer worked for JI Case Company in 1975. From 1976 to 1980, Mr. Meyer was a partner in a Case/New Holland Dealership with locations in Lisbon, North Dakota and Wahpeton, North Dakota. In 1980, Mr. Meyer, along with a partner, founded Titan Machinery Inc. Mr. Meyer has served on both the Case CE and CaseIH Agriculture Dealer Advisory Boards. Mr. Meyer is the past chairman of the North Dakota Implement Dealers Association, and currently serves as a Trustee on the University of Minnesota Foundation.

Mark Kalvoda became our Chief Financial Officer in April 2011 and previously served as our Chief Accounting Officer since September 2007. Prior to joining us, he held various positions between 2004 and 2007 at American Crystal Sugar Co., including Corporate Controller, Assistant Secretary and Assistant Treasurer. Prior to working for American Crystal Sugar Co., he served in various financial positions within Hormel Foods Corporation.

Bryan Knutson became our Chief Operating Officer in August 2017 and previously served as our Vice President, Ag Operations since 2016. Mr. Knutson joined the company in 2002 where he began his career in equipment sales later advancing to store manager, complex manager and region manager prior to his current role. Mr. Knutson is a current board member of the Pioneer Equipment Dealers Association.

PART II

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Our common stock is listed for trading on the NASDAQ Stock Market and trades under the symbol "TITN". As of March 31, 2020, there were approximately 665 record holders of our common stock, which excludes holders whose stock is held either in nominee name or street name brokerage accounts.

DIVIDENDS

We have not historically paid any dividends on our common stock and do not expect to pay cash dividends on our common stock in the foreseeable future. Payment of future cash dividends, if any, will be at the discretion of our board of directors after taking into account various factors, including our financial condition, operating results, current and anticipated cash needs, outstanding indebtedness and plans for expansion and restrictions imposed by lenders, if any.

UNREGISTERED SALES OF EQUITY SECURITIES

We did not have any unregistered sales of equity securities during the fiscal quarter ended January 31, 2020.

SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS

For information on securities authorized for issuance under our equity compensation plans, refer to Item 12, "Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters."

REPURCHASES

We did not engage in any repurchases of our common stock during the fiscal quarter ended January 31, 2020.

Table of Contents

STOCK PERFORMANCE GRAPH

The following graph compares the cumulative total return for the last trading day of our last five fiscal years on a $100 investment (assuming dividend reinvestment) on January 31, 2015, the last trading day before our fifth preceding fiscal year, in each of our common stock, the Russell 2000 Stock Index and the S&P Retailing Group Index.



	January 31,
	2015		2016		2017		2018		2019		2020
Titan Machinery Inc.	$	100.00	$	60.08	$	97.74	$	152.09	$	132.63	$	86.41
Russell 2000 Index	100.00		88.84		116.86		135.15		129.01		138.71
S&P 500 Retail Index	100.00		115.56		135.00		194.19		203.54		243.26

ITEM 6. SELECTED FINANCIAL DATA

The data given below, excluding the store count data, as of and for each of the five years in the period ended January 31, 2020, has been derived from our audited consolidated financial statements. In order to understand the effect of accounting policies and material uncertainties that could affect our presentation of financial information, this data should be read in conjunction with our Consolidated Financial Statements and Notes thereto included under Item 8 to this Form 10-K and in conjunction with Management's Discussion and Analysis of Financial Condition and Results of Operation included under Item 7 of this Form 10-K.

The change in store count, resulting from acquisitions, new store openings, or store closings, has an impact on the comparability of our statement of operations and balance sheet information. The table below summarizes the net change in our store count and ending store count for each fiscal year presented.



	Year Ended January 31,
	2020	2019	2018		2017	2016
Store Count Data
Net change in store count during fiscal year	3	7	(12	)	1	(4	)
Store count at end of fiscal year	107	104	97		109	108

Table of Contents



	Year Ended January 31,
	2020			2019			2018			2017			2016
	(in thousands, except per share data)
Statement of Operations Data:
Revenue
Equipment	$	917,202		$	909,178		$	844,768		$	838,037		$	972,496
Parts	234,217			210,796			203,231			214,103			222,982
Service	99,165			86,840			88,794			94,408			94,216
Rental and other	54,587			54,691			55,813			55,149			66,098
Total Revenue	1,305,171			1,261,505			1,192,606			1,201,697			1,355,792
Cost of Revenue
Equipment	818,707			812,467			764,649			769,924			917,779
Parts	165,190			149,615			143,729			149,212			156,563
Service	33,446			29,036			30,679			31,490			30,121
Rental and other	37,010			38,799			38,249			37,342			45,415
Total Cost of Revenue	1,054,353			1,029,917			977,306			987,968			1,149,878
Gross Profit	250,818			231,588			215,300			213,729			205,914
Operating Expenses	225,722			201,537			203,203			211,372			220,524
Impairment and Restructuring Costs	3,764			2,570			11,172			4,729			8,500
Income (Loss) from Operations	21,332			27,481			925			(2,372		)	(23,110		)
Other Income (Expense)
Interest income and other income (expense)	3,126			2,547			1,635			1,524			(478		)
Interest expense	(9,806		)	(13,874		)	(16,999		)	(21,865		)	(32,623		)
Income (Loss) Before Income Taxes	14,652			16,154			(14,439		)	(22,713		)	(56,211		)
Provision for (Benefit from) Income Taxes	699			3,972			(7,390		)	(8,178		)	(17,982		)
Net Income (Loss) Including Noncontrolling Interest	13,953			12,182			(7,049		)	(14,535		)	(38,229		)
Less: Loss Attributable to Noncontrolling Interest	—			—			—			(356		)	(337		)
Net Income (Loss) Attributable to Titan Machinery Inc.	$	13,953		$	12,182		$	(7,049	)	$	(14,179	)	$	(37,892	)

Earnings (Loss) per Share:
Basic	$	0.63		$	0.55		$	(0.32	)	$	(0.65	)	$	(1.76	)
Diluted	$	0.63		$	0.55		$	(0.32	)	$	(0.65	)	$	(1.76	)

Weighted Average Shares Outstanding:
Basic	21,946			21,809			21,543			21,294			21,111
Diluted	21,953			21,816			21,543			21,294			21,111

Table of Contents



	January 31,
	2020			2019			2018			2017			2016
	(in thousands)
Balance Sheet Data:
Cash	$	43,721		$	56,745		$	53,396		$	53,151		$	89,465
Receivables, net	72,776			77,500			60,672			60,082			65,534
Inventories	597,394			491,091			472,467			478,266			680,482
Prepaid expenses and other	13,655			15,556			12,440			10,989			9,753
Income taxes receivable	—			—			171			5,380			13,011
Total current assets	727,546			640,892			599,146			607,868			858,245
Goodwill and intangibles, net	10,694			8,408			5,193			5,001			5,134
Property and equipment, net of accumulated depreciation	145,562			138,950			151,047			156,647			183,179
Operating lease assets	88,281			—			—			—			—
Deferred income taxes	2,147			3,010			3,472			547			—
Other assets	1,113			1,178			1,450			1,359			1,317
Total Assets	$	975,343		$	792,438		$	760,308		$	771,422		$	1,047,875

Accounts payable	$	16,976		$	16,607		$	15,136		$	17,326		$	16,863
Floorplan payable (1)	371,772			273,756			247,392			233,228			444,780
Senior convertible notes	—			45,249			—			—			—
Current maturities of long-term debt (2)	13,779			2,067			1,574			1,373			1,557
Current operating lease liabilities	12,259			—			—			—			—
Deferred revenue	40,968			46,409			32,324			26,366			31,159
Accrued expenses and other (2)	38,409			36,364			31,863			30,533			29,066
Total current liabilities	494,163			420,452			328,289			308,826			523,425
Senior convertible notes	—			—			62,819			88,501			134,145
Long-term debt, less current maturities (2)	37,789			20,676			34,578			38,236			38,409
Operating lease liabilities	88,387			—			—			—			—
Deferred income taxes	2,055			4,955			2,275			9,500			11,135
Other long-term liabilities (2)	7,845			11,044			10,492			5,180			2,412
Total stockholders' equity	345,104			335,311			321,855			321,179			338,349
Total Liabilities and Stockholders' Equity	$	975,343		$	792,438		$	760,308		$	771,422		$	1,047,875

(1) Portion of floorplan payable balance which is interest-bearing as of January 31, of the relevant year	45		%	45		%	47		%	72		%	75		%
(2) Amounts as of, and prior to January 31, 2018, do not include the reclassification of finance leases from current maturities of long-term debt to accrued expenses and other, as well as, long-term debt, less current maturities to other long-term liabilities. See Note 1 of our consolidated financial statements for further detail.

Table of Contents

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations together with our financial statements and the related notes appearing under Item 8 of this Form10-K. Some of the information contained in this discussion and analysis or set forth elsewhere in this annual report, including information with respect to our plans and strategy for our business and expected financial results, includes forward-looking statements that involve risks and uncertainties. You should review the "Information Regarding Forward-Looking Statement" in this Item 7 and "Risk Factors" presented under Item 1A for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis in this annual report.

A discussion of changes in our Financial Results and Cash Flow Comparisons from fiscal year 2018 to fiscal year 2019 has been omitted from this Form 10-K, but may be found in Item 7 of Part II of our Annual Report on Form 10-K for the fiscal year ended January 31, 2019, filed with the SEC on April 5, 2019.

BUSINESS DESCRIPTION

We own and operate a network of full service agricultural and construction equipment stores in the United States and Europe. Based upon information provided to us by CNH Industrial N.V. or its U.S. subsidiary CNH Industrial America, LLC, collectively referred to in this annual report as CNH Industrial, we are the largest retail dealer of Case IH Agriculture equipment in the world, the largest retail dealer of Case Construction equipment in North America and a major retail dealer of New Holland Agriculture and New Holland Construction equipment in the U.S. We operate our business through three reportable segments: Agriculture, Construction and International. Within each segment, we have four principal sources of revenue: new and used equipment sales, parts sales, service, and equipment rental and other activities.

The agricultural equipment we sell and service includes machinery and attachments for uses ranging from large-scale farming to home and garden use. The construction equipment we sell and service includes heavy construction machinery, light industrial machinery for commercial and residential construction, road and highway construction machinery, mining, energy, and forestry operations equipment. We offer our customers a one-stop solution for their equipment needs through:


•	new and used equipment sales;


•	parts sales;


•	equipment repair and maintenance services; and


•	equipment rental and other activities.

The new equipment and parts we sell are supplied primarily by CNH Industrial. According to its public reports, CNH Industrial is a leading manufacturer and supplier of agricultural and construction equipment based on the number of units sold, primarily through the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. Sales of new CNH Industrial products accounted for approximately 70% of our new equipment revenue in fiscal 2020, with our single largest manufacturer other than CNH Industrial representing approximately 2% of our total new equipment sales. We acquire used equipment for resale primarily through trade-ins from our customers and in some cases through selective purchases. We sell parts and provide in-store and on-site repair and maintenance services. We rent equipment and provide other ancillary services such as equipment transportation, GPS signal subscriptions, farm data management systems, precision farming equipment, and finance and insurance products.

Throughout our 39-year operating history, we have built an extensive, geographically contiguous network of 74 stores located in the United States and 33 stores in Europe. We have a history of growth through acquisitions, including over 50 acquisitions in 11 U.S. states and four European countries since January 1, 2003. We believe that there will continue to be opportunities for dealership consolidation in the future, and we expect that acquisitions will continue to be a component of our long-term growth strategy.

Certain External Factors Affecting our Business

We are subject to a number of factors that affect our business including those factors discussed in the sections in this annual report entitled "Risk Factors" and "Information Regarding Forward-Looking Statements." Certain of these external factors include, but are not limited to, the following:

Table of Contents

Macroeconomic and Industry Factors

Our Agriculture and International businesses are primarily driven by the demand for agricultural equipment for use in the production of food, fiber, feed grain and renewable energy; home and garden applications; and the maintenance of commercial, residential and government properties. Agriculture industry factors such as changes in agricultural commodity prices and net farm income, have an effect on customer sentiment and their ability to secure financing for equipment purchases. Macroeconomic and industry factors that affect commodity prices and net farm income include changing worldwide demand for agriculture commodities, crop yields and supply disruptions caused by weather patterns and crop diseases, crop stock levels, production costs, and changing U.S. dollar foreign currency exchange rates. Based on U.S. Department of Agriculture ("USDA") publications, the most recent estimate of net farm income for calendar year 2019 increased 12% compared to calendar year 2018 due to the U.S. Federal government's direct farm program payments. Based on its February 2020 report, the USDA projected net farm income for calendar year 2020 to increase 3.0%, as compared to calendar year 2019.

During economic downturns, and especially in the agriculture industry, equipment revenue generally decreases; however, parts and service revenue tend to be more stable, as the amount of land in production remains unchanged. Additionally, farmers maintain existing equipment rather than purchase new equipment. Our gross profit margins on equipment sales are lower than our gross profit margins on parts and service. As a result, a change in sales mix may cause our gross profit margin to increase on a percentage basis even though our overall gross profit dollars may decrease. Our operating expenses are largely fixed expenses, other than commissions paid to our equipment sales consultants, which generally fluctuate with gross profit. When equipment revenue decreases, it may have a negative impact on our ability to leverage these fixed costs, and, as a result, may reduce our operating income.

Seasonality & Weather

The agricultural and construction equipment businesses are highly seasonal, which causes our quarterly results and our available cash flow to fluctuate during the year. Our customers generally purchase and rent equipment in preparation for, or in conjunction with, their busy seasons, which for farmers are the spring planting and fall harvesting seasons; and which for Construction customers is typically the second and third quarters of our fiscal year for much of our Construction footprint. Our parts and service revenues are typically highest during our customers' busy seasons as well, due to the increased use of their equipment during this time, which generates the need for more parts and service work. However, weather conditions impact the timing of our customers' busy times, which may cause greater than expected fluctuations in our quarterly financial results year over year. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of funds from completed harvests and construction projects.

Seasonal weather trends, particularly severe wet or dry conditions, can have a significant impact on regional agricultural and construction market performance by affecting crop production and the ability to undertake construction projects. Weather conditions that adversely affect the agricultural or construction markets decrease the demand for our products and services.

In addition, numerous external factors such as credit markets, commodity prices, and other circumstances may disrupt normal purchasing practices and buyer sentiment, further contributing to the seasonal fluctuations.

Dependence on our Primary Supplier

The majority of our business involves the distribution and servicing of equipment manufactured by CNH Industrial. In fiscal 2020, CNH Industrial supplied approximately 74% of the new equipment sold in our Agriculture segment, 70% of the new equipment sold in our Construction segment, and 62% of the new equipment sold in our International segment, and represented a significant portion of our parts revenue. Thus, we believe the following factors have a significant impact on our operating results:


•	CNH Industrial’s product offerings, reputation and market share;


•	CNH Industrial’s product prices and incentive and discount programs;


•	CNH Industrial's supply of inventory;


•	CNH Industrial's offering of floorplan payable financing for the purchase of a substantial portion of our inventory; and


•	CNH Industrial's offering of financing and leasing used by our customers to purchase CNH Industrial equipment from us.

Table of Contents

Credit Market Changes

Changes in credit markets can affect our customers' ability and willingness to make capital expenditures, including purchasing our equipment. Tight credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets have the potential to adversely affect our business. Such disruptions in the overall economy and financial markets and the related reduction in consumer confidence in the economy, slow activity in the capital markets, negatively affect access to credit on commercially acceptable terms, and may adversely impact our customers' access to credit and the terms of any such credit. However, if retail interest rates remain low, our business may be positively affected by customers who find financing purchases of our equipment more attractive due to lower borrowing costs.

Our business is also particularly dependent on our access to credit markets to manage inventory and finance acquisitions. We cannot predict what future changes will occur in credit markets or how these changes will impact our business.

Inflation

Inflation has not had a material impact on our operating results and we do not expect it to have a material impact in the future. To date, in those instances in which we have experienced cost increases, we have been able to increase selling prices to offset such increases.

Significant Items Impacting Our Financial Position and Results of Operations

AGRAM Acquisition

On July 2, 2018, we continued our strategy of acquiring dealerships in desired market areas with our acquisition of two commonly-controlled companies, AGRAM Landtechnikvertrieb GmbH and AGRAM Landtechnik Rollwitz GmbH (collectively "AGRAM"). AGRAM consists of four Case IH agriculture dealership locations in the following cities of Germany: Altranft, Burkau, Gutzkow, and Rollowitz. Total cash consideration paid in the acquisition was $19.2 million, which we financed through available cash resources and capacity under our existing floorplan payable and other credit facilities. The four AGRAM dealerships are included within our International segment.

Critical Accounting Policies and Use of Estimates

In the preparation of financial statements prepared in conformity with U.S. generally accepted accounting principles ("GAAP"), we are required to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and the related disclosures. While we believe the estimates and judgments we use in preparing our financial statements are appropriate, they are subject to future events and uncertainties regarding their outcome and therefore actual results may materially differ from these estimates. We describe in Note 1, Business Activity and Significant Accounting Polices, of the Notes to our Consolidated Financial Statements the significant accounting policies used in preparing the consolidated financial statements. We consider the following items in our consolidated financial statements to require significant estimation or judgment.

Revenue Recognition

Equipment revenue transactions include the sale of agricultural and construction equipment and often include both cash and noncash consideration received from our customers, with noncash consideration in the form of used, trade-in, equipment assets. The amount of revenue recognized in the sale transaction is dependent on the value assigned to the trade-in asset. Significant judgment is required to estimate the value of trade-in assets. We assign value based on the estimated selling price for that piece of equipment in the applicable market, less a gross profit amount to be realized at the time the trade-in asset is sold and an estimate of any reconditioning work required to ready the asset for sale. We estimate future selling prices of trade-in assets using various external industry data and relevant internal information, and consider the impact of various factors including model year, hours of use, overall condition, and other equipment specifications. Our estimates of the value of trade-in assets are impacted by changing market values of used equipment and the availability of relevant and reliable third-party data. In instances in which relevant third-party information is not available, the value assigned to trade-in equipment is dependent on internal judgments.

Inventories

New and used equipment inventories are stated at the lower of cost (specific identification) or net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The majority of our used equipment inventory is acquired through trade-ins from our customers and is initially measured and recognized based on the estimated future selling price of the equipment, less a gross profit amount to be realized when the trade-in asset is sold and an estimate of any reconditioning work required to ready the

Table of Contents

asset for sale. Subsequent to the initial recognition, all new and used equipment inventories are subject to lower of cost or net realizable value assessments. We estimate net realizable value using internal information, management judgment and third-party data that considers various factors including age of equipment, hours of use and market conditions. Generally, used equipment prices are more volatile to changes in market conditions than prices for new equipment due to incentive programs that may be offered by manufacturers to assist in the sale of new equipment. We review our equipment inventory values and adjust them whenever the carrying amount exceeds the estimated net realizable value.

Parts inventories are valued at the lower of average cost or net realizable value. We estimate net realizable value of our parts inventories based on various factors including aging and sales history of each type of parts inventory.

Impairment of Long-Lived Assets

Long-Lived Assets. Our long-lived assets consist primarily of property and equipment and operating lease assets. We review these assets for potential impairment whenever events or circumstances indicate that the carrying value may not be recoverable. Recoverability is measured by comparing the estimated future undiscounted cash flows of such assets to their carrying values. If the estimated undiscounted cash flows exceed the carrying value, the carrying value is considered recoverable and no impairment recognition is required. However, if the sum of the undiscounted cash flows is less than the carrying value of the asset, the second step of the impairment analysis must be performed to measure the amount of the impairment, if any. The second step of the impairment analysis compares the estimated fair value of the long-lived asset to its carrying value and any amount by which the carrying value exceeds the fair value is recognized as an impairment charge.

When reviewing long-lived assets for impairment, we group long-lived assets with other assets and liabilities at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities. Long-lived assets deployed and used by individual store locations are reviewed for impairment at the individual store level. Other long-lived assets shared across stores within a segment or shared across segments are reviewed for impairment on a segment or consolidated level as appropriate.

During our 2020 fiscal year, we determined that events or circumstances were present that may indicate that the carrying amount of certain of our store long-lived assets might not be recoverable. The events or circumstances which indicated that certain of our store long-lived assets might not be recoverable included a current period operating loss combined with historical losses and anticipated future operating losses within certain of our stores, or an expectation that a long-lived asset (or asset group) will be disposed of before the end of its previously estimated useful life. In light of these circumstances, we performed step one of the impairment analysis for these assets, which have a combined carrying value of $35.4 million, to determine if the asset values are recoverable. In certain cases, the analysis indicated that the carrying value is not recoverable. The aggregate carrying value of such assets totaled $9.4 million. Based on this conclusion, we performed step two of the impairment analysis and estimated the fair value of these assets using an income approach that incorporated unobservable inputs including estimated forecasted net cash flows generated from the use and disposition of these assets. Step two of the analysis indicated that an impairment charge in the amount of $3.1 million was necessary, of which $2.3 million related to the Agriculture segment and $0.8 million related to the Construction segment. In all other cases, in which the aggregate carrying value of such assets totaled $26.0 million, our analyses indicated that the carrying values are recoverable based on our estimates of future undiscounted cash flows under step one of the impairment analysis.

Our impairment analyses require significant judgment, including identification of the grouping of long-lived and other assets and liabilities for impairment testing, estimates of future cash flows arising from these groups of assets and liabilities, and estimates of the remaining useful lives of the long-lived assets being evaluated. Our estimates inherently include a degree of uncertainty and are impacted by macroeconomic and industry conditions, the competitive environment and other factors. Adverse changes in any of these factors in future periods could result in impairment charges in future periods which could materially impact our results of operations and financial position.

Income Taxes

In determining our provision for (benefit from) income taxes, we must make certain judgments and estimates, including an assessment of the realizability of our deferred tax assets. In evaluating our ability to realize the benefit of our deferred tax assets we consider all available positive and negative evidence, including our historical operating results and our expectation of future taxable income, the availability to implement prudent tax-planning strategies, and the carryforward periods over which the assets may be realized. These assumptions require significant judgment and estimation.

In reviewing our deferred tax assets as of January 31, 2019, we concluded that a partial valuation allowance for U.S. federal and state deferred tax assets was warranted. In total we had recognized a valuation allowance of $4.4 million as of January 31, 2019. This conclusion was principally based on the presence of historical losses and our expected future sources of taxable income, including the anticipated future reversal of our existing deferred tax assets and liabilities. We review our foreign deferred tax assets, including net operating losses, on a jurisdiction-by-jurisdiction basis. As of January 31, 2019, we

Table of Contents

concluded that a valuation allowance for certain of our foreign deferred tax assets, including net operating losses, was warranted. In total we have recognized a valuation allowance in the amount of $2.3 million. This conclusion was principally based on the presence of historical losses and the anticipated time period over which we may generate taxable income in excess of these historical losses.

During the fiscal year ended January 31, 2020, the Company concluded, based upon all available evidence, it was more likely than not that it would have sufficient future taxable income to realize the Company’s federal and state deferred tax assets. As a result, the Company released the $4.6 million valuation allowance associated with deferred tax assets and recognized a corresponding benefit from income taxes in the consolidated statement of operations for the year ended January 31, 2020. At fiscal year end 2020, the remaining foreign valuation allowance was $2.2 million and there was no domestic valuation allowance. The Company's conclusion regarding the realizability of such deferred tax assets was based on recent profitable domestic operations resulting in a cumulative profit over the three-year period ending January 31, 2020 and our projections of future profitability in the U.S.

The initial recognition of, and any changes in, a deferred tax asset valuation allowance are recorded to the provision for income taxes and impacts our effective tax rate. Our assessment of the need for and magnitude of valuation allowances for our deferred tax assets may be impacted by changes in tax laws, our assumptions regarding the ability to generate future taxable income and the availability of tax-planning strategies. Changes in any of these factors could lead to a change in the recognized valuation allowance which may impact our future results of operations and financial position.

New Accounting Pronouncements

Refer to Note 1, Business Activity and Significant Accounting Polices, of the Notes to our Consolidated Financial Statements for a description of new accounting pronouncements recently adopted or not yet adopted and the impact or anticipated impact of such pronouncements to our consolidated financial statements.

Key Financial Metrics

In addition to tracking our sales and expenses to evaluate our operational performance, we also monitor the following key financial metrics. The results of some of these metrics are discussed further throughout the Management's Discussion and Analysis of Financial Condition and Results of Operations section of this Form 10-K.

Inventory Turnover

Inventory turnover measures the rate at which inventory is sold during the year. We calculate it by dividing cost of sales on equipment and parts for the last twelve months by the average of the month-end balances of our equipment and parts inventories for the same twelve-month period. We believe that inventory turnover is an important management metric in evaluating the efficiency at which we are managing and selling our inventories.

Same-Store Results

Same-store results for any period represent results of operations by stores that were part of our Company for the entire comparable period in the preceding fiscal year. We do not distinguish relocated or newly-expanded stores in this same-store analysis. Closed stores are excluded from the same-store analysis.

Absorption

Absorption is an industry term that refers to the percentage of an equipment dealer's operating expense covered by the combined gross profit from parts, service and rental fleet activity. We calculate absorption by dividing our gross profit from sales of parts, service and rental fleet by our operating expenses, less commission expense on equipment sales, plus interest expense on floorplan payables and rental fleet debt. We believe that absorption is an important management metric because during economic down cycles our customers tend to postpone new and used equipment purchases while continuing to run, maintain and repair their existing equipment. Thus, operating at a high absorption rate enables us to operate profitably throughout economic down cycles.

Dollar Utilization

Dollar utilization is a measurement of asset performance and profitability used in the rental industry. We calculate the dollar utilization of our rental fleet equipment by dividing the rental revenue earned on our rental fleet by the average gross carrying value of our rental fleet (comprised of original equipment costs plus additional capitalized costs) for that period. While our rental fleet has variable expenses related to repairs and maintenance, its primary expense for depreciation is fixed. Low dollar utilization of our rental fleet has a negative impact on gross profit margin and gross profit dollars due to the fixed

Table of Contents

depreciation component. However, high dollar utilization of our rental fleet has a positive impact on gross profit margin and gross profit dollars.

Adjusted EBITDA

EBITDA is a non-GAAP financial measure defined as earnings before finance costs, income taxes, depreciation and amortization and is a metric frequently used to assess and evaluate financial performance. Management uses Adjusted EBITDA as a measure of financial performance, as a supplemental measure to evaluate the Company's overall operating performance and believes it provides a useful metric for comparability between periods and across entities within our industry by excluding differences in capital structure, income taxes, non-cash charges and certain activities that occur outside of the ordinary course of our business. We calculate Adjusted EBITDA as our net income (loss), adjusted for net interest (excluding floorplan interest expense), income taxes, depreciation, amortization, and items included in our non-GAAP reconciliation, for each of the respective periods. Adjusted EBITDA should be evaluated in addition to, and not considered a substitute for, or superior to, any GAAP measure of net income (loss). In addition, other companies may calculate Adjusted EBITDA in a different manner, which may hinder comparability with other companies. The Company's Adjusted EBITDA for the fiscal years ended January 31, 2020 and 2019 was $53.1 million and $49.8 million, respectively. Refer to the Non-GAAP Financial Measures section for a reconciliation of Adjusted EBITDA to net income.

Key Financial Statement Components

Revenue


•	Equipment: We derive equipment revenue from the sale of new and used agricultural and construction equipment.


•	Parts: We derive parts revenue from the sale of parts for brands of equipment that we sell, other makes of equipment, and other types of equipment and related components. Our parts sales provide us with a relatively stable revenue stream that is less sensitive to the economic cycles that affect our equipment sales.


•	Service: We derive service revenue from repair and maintenance services to our customers' equipment. Our repair and maintenance services provide a high-margin, relatively stable source of revenue through changing economic cycles.


•	Rental and other: We derive other revenue from equipment rentals and ancillary equipment support activities such as equipment transportation, GPS signal subscriptions and reselling financial and insurance products.

Cost of Revenue


•	Equipment: Cost of equipment revenue is the lower of the acquired cost or the market value of the specific piece of equipment sold.


•	Parts: Cost of parts revenue is the lower of the acquired cost or the market value of the parts sold, based on average costing.


•	Service: Cost of service revenue represents costs attributable to services provided for the maintenance and repair of customer-owned equipment and equipment then on-rent by customers.


•	Rental and other: Costs of other revenue represent costs associated with equipment rental, such as depreciation, maintenance and repairs, as well as costs associated providing transportation, hauling, parts freight, GPS subscriptions and damage waivers, including, among other items, drivers' wages, fuel costs, shipping costs and our costs related to damage waiver policies.

Operating Expenses

Our operating expenses include sales and marketing expenses, sales commissions (which generally are based upon equipment gross profit margins), payroll and related benefit costs, insurance expenses, professional fees, property rental and related costs, property and other taxes, administrative overhead, and depreciation associated with property and equipment (other than rental equipment).

Floorplan Interest

The cost of financing inventory is an important factor affecting our results of operations. Floorplan payable financing from CNH Industrial Capital, the Bank Syndicate Credit Facility, DLL Finance and various credit facilities related to our foreign subsidiaries represent the primary sources of financing for equipment inventories. CNH Industrial regularly offers interest-free periods as well as additional incentives and special offers. As of January 31, 2020, 55.2% of our floorplan payable financing was non-interest bearing.

Table of Contents

Other Interest Expense

Interest expense represents the interest on our debt instruments, including on our previously outstanding Senior Convertible Notes, other than floorplan payable financing facilities. Non-cash interest expense from amortization of the debt discount associated with our previously outstanding Senior Convertible Notes is also included in this balance.

Table of Contents

Results of Operations

Comparative financial data for each of our four sources of revenue for fiscal 2020 and 2019 are presented below. The results include the acquisitions made during these periods. The year-to-year comparison included below is not necessarily indicative of future results. Information regarding segment revenue and income (loss) before income taxes is presented for each fiscal year following our discussion of the consolidated results of operations. Additional information regarding our segments is included in Note 25 of our consolidated financial statements.

The comparative financial data for fiscal 2018 and the comparison of fiscal 2019 to fiscal 2018 have been omitted from this Form 10-K but may be found in Item 7 of Part II of our Annual Report on Form 10-K for the fiscal year ended January 31, 2019, filed with the SEC on April 5, 2019.



	Year Ended January 31,
	2020			2019
	(dollars in thousands)
Equipment
Revenue	$	917,202		$	909,178
Cost of revenue	818,707			812,467
Gross profit	$	98,495		$	96,711
Gross profit margin	10.7		%	10.6		%
Parts
Revenue	$	234,217		$	210,796
Cost of revenue	165,190			149,615
Gross profit	$	69,027		$	61,181
Gross profit margin	29.5		%	29.0		%
Service
Revenue	$	99,165		$	86,840
Cost of revenue	33,446			29,036
Gross profit	$	65,719		$	57,804
Gross profit margin	66.3		%	66.6		%
Rental and other
Revenue	$	54,587		$	54,691
Cost of revenue	37,010			38,799
Gross profit	$	17,577		$	15,892
Gross profit margin	32.2		%	29.1		%

Table of Contents

The following table sets forth our statements of operations data expressed as a percentage of revenue for the fiscal years indicated.



	Year Ended January 31,
	2020		2019
Revenue
Equipment	70.3	%	72.1	%
Parts	17.9	%	16.7	%
Service	7.6	%	6.9	%
Rental and other	4.2	%	4.3	%
Total Revenue	100.0	%	100.0	%
Total Cost of Revenue	80.8	%	81.6	%
Gross Profit Margin	19.2	%	18.4	%
Operating Expenses	17.3	%	16.0	%
Impairment of Intangible and Long-Lived Assets	0.3	%	0.2	%
Income from Operations	1.6	%	2.2	%
Other Income (Expense)	(0.5	)%	(0.9	)%
Income Before Income Taxes	1.1	%	1.3	%
Provision for Income Taxes	0.1	%	0.3	%
Net Income	1.1	%	1.0	%

Fiscal Year Ended January 31, 2020 Compared to Fiscal Year Ended January 31, 2019

Consolidated Results

Revenue



	Year Ended January 31,				Increase/			Percent
	2020		2019		(Decrease)			Change
	(dollars in thousands)
Equipment	$	917,202	$	909,178	$	8,024		0.9	%
Parts	234,217		210,796		23,421			11.1	%
Service	99,165		86,840		12,325			14.2	%
Rental and other	54,587		54,691		(104		)	(0.2	)%
Total Revenue	$	1,305,171	$	1,261,505	$	43,666		3.5	%

The increase in total revenue for fiscal 2020, as compared to fiscal 2019, was primarily the result of increased parts and service revenue within our Agriculture and Construction segments. Company-wide same-store sales were relatively flat, increasing 1.6% over the prior fiscal year, which was driven by parts and service revenue. Our total revenue increase over the prior year was also impacted by our acquisitions of AGRAM and Northwood.

Table of Contents

Gross Profit



	Year Ended January 31,						Increase/			Percent
	2020			2019			(Decrease)			Change
	(dollars in thousands)
Gross Profit
Equipment	$	98,495		$	96,711		$	1,784		1.8	%
Parts	69,027			61,181			7,846			12.8	%
Service	65,719			57,804			7,915			13.7	%
Rental and other	17,577			15,892			1,685			10.6	%
Total Gross Profit	$	250,818		$	231,588		$	19,230		8.3	%
Gross Profit Margin
Equipment	10.7		%	10.6		%	0.1		%	0.9	%
Parts	29.5		%	29.0		%	0.5		%	1.7	%
Service	66.3		%	66.6		%	(0.3		)%	(0.5	)%
Rental and other	32.2		%	29.1		%	3.1		%	10.7	%
Total Gross Profit Margin	19.2		%	18.4		%	0.8		%	4.3	%
Gross Profit Mix
Equipment	39.3		%	41.8		%	(2.5		)%	(6.0	)%
Parts	27.5		%	26.4		%	1.1		%	4.2	%
Service	26.2		%	25.0		%	1.2		%	4.8	%
Rental and other	7.0		%	6.8		%	0.2		%	2.9	%
Total Gross Profit Mix	100.0		%	100.0		%

Gross profit increased 8.3% or $19.2 million from fiscal 2019 to fiscal 2020, primarily due to higher revenue from our parts and service business in fiscal 2020. Gross profit margin increased from 18.4% in fiscal 2019 to 19.2% in fiscal 2020. The improvement in overall gross profit margin was the result of an improved sales mix, a greater percentage of revenue was generated by our higher margin parts and service businesses. Additionally, an increase in our rental fleet dollar utilization to 25.4% in fiscal 2020 compared to 23.9% in fiscal 2019 resulted in an improvement in rental and other gross profit, as well as gross profit margin.

Our company-wide absorption rate improved to 72.0% for fiscal 2020 as compared to 71.6% during fiscal 2019, due to additional parts and service gross profit partially offset by increased expenses.

Operating Expenses



	Year Ended January 31,									Percent
	2020			2019			Increase			Change
	(dollars in thousands)
Operating Expenses	$	225,722		$	201,537		$	24,185		12.0	%
Operating Expenses as a Percentage of Revenue	17.3		%	16.0		%	1.3		%	8.1	%

Operating expenses for fiscal 2020 increased $24.2 million, as compared to fiscal 2019. In fiscal 2020, operating expenses as a percentage of revenue increased to 17.3% from 16.0% in fiscal 2019. Operating expenses increased primarily as a result of costs arising from the ERP transition, a full year of expenses for AGRAM, expenses associated with our acquisition of the Northwood, North Dakota dealership location (October 2019), and increased other costs required to support higher business volumes in our Agriculture and Construction segments. These expense increases combined with relatively flat same-store sales resulted in the 1.3% increase in operating expenses as a percentage of revenue.

Table of Contents

Impairment and Restructuring Costs



	Year Ended January 31,				Increase/			Percent
	2020		2019		(Decrease)			Change
	(dollars in thousands)
Impairment of Long-Lived Assets	$	3,764	$	2,156	$	1,608		75.0	%
Restructuring Costs	—		414		(414		)	n/m

During fiscal 2020, we recognized a total of $3.8 million of impairment expenses related to long-lived assets, as compared to $2.2 million in fiscal 2019. The fiscal 2020 impairment expenses were related to certain store assets in the Agriculture and Construction segments, and primarily related to the impairment of right-of-use assets identified after the initial adoption of the new lease accounting standard guidance in ASC 842, which we adopted in fiscal year 2020.

Other Income (Expense)



	Year Ended January 31,						Increase/			Percent
	2020			2019			(Decrease)			Change
	(dollars in thousands)
Interest income and other income (expense)	$	3,126		$	2,548		$	578		22.7	%
Floorplan interest expense	(5,354		)	(6,114		)	(760		)	12.4	%
Other interest expense	(4,452		)	(7,761		)	(3,309		)	42.6	%

The decrease in floorplan interest expense for fiscal 2020, as compared to fiscal 2019, was primarily due to a decrease in our interest-bearing inventory in fiscal 2020. Interest expense associated with our Senior Convertible Notes, which is reflected in other interest expense, decreased in fiscal 2020 compared to fiscal 2019, due to interest savings resulting from the payoff of our Senior Convertible Notes on May 1, 2019.

Provision for Income Taxes



	Year Ended January 31,							Percent
	2020		2019		(Decrease)			Change
	(dollars in thousands)
Provision for Income Taxes	$	699	$	3,972	$	(3,273	)	82.4	%

Our effective tax rate decreased from 24.6% in fiscal 2019 to 4.8% in fiscal 2020. The Company's effective tax rate decreased due to changes in valuation allowances recognized for deferred tax assets. In fiscal 2020, the Company concluded that a release of its domestic valuation allowance of $4.6 million for U.S. federal and state deferred tax assets was warranted. This conclusion was principally based on the presence of three years of cumulative income and our projections of future profitability.

See Note 18 to our consolidated financial statements for further details on our effective tax rate.

Table of Contents

Segment Results



	Year Ended January 31,						Increase/			Percent
	2020			2019			(Decrease)			Change
	(dollars in thousands)
Revenue
Agriculture	$	749,042		$	726,793		$	22,249		3.1	%
Construction	320,034			301,989			18,044			6.0	%
International	236,095			232,723			3,371			1.4	%
Total	$	1,305,171		$	1,261,505		$	43,664		3.5	%

Income (Loss) Before Income Taxes
Agriculture	$	18,036		$	16,799		$	1,237		7.4	%
Construction	(2,290		)	(4,400		)	2,110			48.0	%
International	504			5,160			(4,656		)	(90.2	)%
Segment income before income taxes	16,250			17,559			(1,309		)	(7.5	)%
Shared Resources	(1,598		)	(1,405		)	(192		)	(13.7	)%
Total	$	14,652		$	16,154		$	(1,501	)	(9.3	)%

Agriculture

Agriculture segment revenue for fiscal 2020 increased 3.1% or $22.2 million compared to the same period last year. Agriculture same-store sales increased 2.7% for fiscal 2020, as compared to fiscal 2019. Total segment revenue and same-store sales were primarily driven by increased parts and service business. The Northwood acquisition, which closed in October 2019, also contributed to the total sales growth for the segment.

Agriculture segment income before income taxes for fiscal 2020 improved by $1.2 million or 7.4% compared to the same period last year. The improvement in segment performance was largely the result of increased parts and service sales, partially offset by increases in operating expenses, as well as floorplan interest.

Construction

Construction segment revenue for fiscal 2020 improved 6.0% or $18.0 million compared to fiscal 2019. Same-store sales growth accounted for 6.1% of the 6.0% segment revenue increase. Our Construction segment experienced increased revenues across all revenue categories: equipment, parts, service, and rental and other.

The Construction segment loss before income taxes was $2.3 million for fiscal 2020 compared to $4.4 million for the prior year. The improvement in segment results was due to increased revenue and improved gross profit margins, partially offset by higher operating expenses required to support increased activity within this segment.

International

International segment revenue for fiscal 2020 increased 1.4% or $3.4 million compared to fiscal 2019, primarily due to a full year of results from our AGRAM acquisition plus an increase in parts and service sales. Partially offsetting the impact of our AGRAM acquisition and parts and service sales growth was a same-store sales decrease of 7.9% in fiscal 2020 compared to the prior year due to decreased equipment revenue resulting from challenging industry conditions in certain of our markets.

Our International segment income before income taxes was $0.5 million for fiscal 2020, compared to $5.2 million for the same period last year. The decrease in segment income before income taxes was primarily due to decreased equipment revenue and the resulting negative impact on our ability to leverage our fixed operating costs within this segment as well as an overall increase in segment operating expenses.

Shared Resources/Eliminations

We incur centralized expenses/income at our general corporate level, which we refer to as “Shared Resources,” and then allocate most of these net expenses to our segments. Since these allocations are set early in the year, and a portion is planned to be unallocated, unallocated balances may occur. Shared Resource loss before income taxes was $1.6 million for fiscal 2020 compared to $1.4 million for fiscal 2019.

Table of Contents

Non-GAAP Financial Measures

To supplement our net income and diluted earnings per share ("diluted EPS"), both GAAP measures, we present and our management utilizes adjusted net income, adjusted diluted EPS, and adjusted EBITDA, all non-GAAP financial measures. Generally, these non-GAAP financial measures include adjustments for items such as valuation allowances for income tax, restructuring costs, long-lived asset impairment charges, gains and losses recognized on the repurchase of our Senior Convertible Notes, ERP start-up costs, and other gains and losses. We believe that the presentation of adjusted net income, adjusted diluted EPS and adjusted EBITDA is relevant and useful to our management and investors because it provides a measurement of earnings on activities that we consider to occur in the ordinary course of our business. Adjusted net income, adjusted diluted EPS, and adjusted EBITDA should be evaluated in addition to, and not considered a substitute for, or superior to, the most comparable GAAP financial measure. In addition, other companies may calculate these non-GAAP financial measures in a different manner, which may hinder comparability of our results with those of other companies.

Table of Contents

The following tables reconcile net income and diluted EPS, GAAP financial measures, to adjusted net income, adjusted diluted EPS, and adjusted EBITDA, all non-GAAP financial measures.



	Year Ended January 31,
	2020		2019
	(dollars in thousands, except per share data)
Adjusted Net Income
Net Income	$	13,953	$	12,182
Adjustments
ERP transition costs	7,175		—
Loss on repurchase of senior convertible notes	—		615
Restructuring & impairment charges	3,764		2,570
Total Pre-Tax Adjustments	10,939		3,185
Less: Tax Effect of Adjustments (1)	2,571		636
Less: Income Tax Valuation Allowance (2)	4,611		—
Total Adjustments	3,757		2,549
Adjusted Net Income	$	17,710	$	14,731

	Year Ended January 31,
	2020		2019
	(dollars in thousands, except per share data)
Adjusted Diluted EPS
Diluted EPS	$	0.63	$	0.55
Adjustments (3)
ERP transition costs	0.32		—
Loss on repurchase of senior convertible notes	—		0.03
Restructuring & impairment charges	0.17		0.12
Total Pre-Tax Adjustments	0.49		0.15
Less: Tax Effect of Adjustments (1)	0.12		0.03
Less: Income Tax Valuation Allowance (2)	0.21		—
Total Adjustments	0.16		0.12
Adjusted Diluted EPS	$	0.79	$	0.67

Adjusted EBITDA
Net Income	$	13,953	$	12,182
Adjustments
Interest expense, net of interest income	4,121		6,818
Provision for income taxes	699		3,972
Depreciation and amortization	28,067		23,605
EBITDA	46,840		46,577
Adjustments
ERP transition costs (excluding depreciation)	2,497		—
Loss on repurchase of senior convertible notes	—		615
Restructuring & impairment charges	3,764		2,570
Total Adjustments	6,261		3,185
Adjusted EBITDA	$	53,101	$	49,762


(1)	The tax effect of adjustments for all U.S. related items was determined using the federal and state statutory tax rates applicable to the respective period with an impact for state taxes given our valuation allowances against deferred tax assets. The federal statutory tax rate for the fiscal years ended January 31, 2020 and 2019 was 23.5% and 21.0%, respectively.

Table of Contents


(2)	Amounts reflect the tax benefit recognized from the release of the valuation allowance on our U.S. deferred tax assets.


(3)	Adjustments are net of the impact of amounts allocated to participating securities where applicable.

For a discussion of other non-GAAP financial measures, see our discussion of Adjusted Cash Flow in the Cash Flow section elsewhere within this Item 7 of our Form 10-K.

Liquidity and Capital Resources

Sources of Liquidity

Our primary sources of liquidity are cash reserves, cash generated from operations, and borrowings under our floorplan payable and other credit facilities. We expect these sources of liquidity to be sufficient to fund our working capital requirements, acquisitions, capital expenditures and other investments in our business, service our debt, pay our tax and lease obligations and other commitments and contingencies, and meet any seasonal operating requirements for the foreseeable future, provided, however, that our borrowing capacity under our credit agreements is dependent on compliance with various financial covenants as further described in Note 8 to our consolidated financial statements included in this Form 10-K. We have worked in the past, and will continue to work in the future, with our lenders to implement satisfactory modifications to these financial covenants when appropriate for the business conditions confronted by us.

Equipment Inventory and Floorplan Payable Credit Facilities

Floorplan payable balances reflect the amount owed for new equipment inventory purchased from a manufacturer and used equipment inventory, which is primarily purchased through trade-in on equipment sales, net of unamortized debt issuance costs incurred for floorplan credit facilities. Certain of the manufacturers from which we purchase new equipment inventory offer financing on these purchases, either offered directly from the manufacturer or through the manufacturers’ captive finance affiliate. CNH Industrial's captive finance subsidiary, CNH Industrial Capital, also provides financing of used equipment inventory. We also have floorplan payable balances with non-manufacturer lenders for new and used equipment inventory. Borrowings and repayments on manufacturer floorplan facilities are reported as operating cash flows, while borrowings and repayments on non-manufacturer floorplan facilities are reported as financing cash flows in our consolidated statements of cash flows.

As of January 31, 2020, we had floorplan payable lines of credit for equipment purchases totaling $717.0 million, which includes a $450.0 million credit facility with CNH Industrial Capital, a $140.0 million floorplan payable line under the Wells Fargo Credit Agreement, a $60.0 million credit facility with DLL Finance, and additional credit facilities related to our foreign subsidiaries. Available borrowing capacity under these lines of credit are reduced by amounts outstanding under such facilities, borrowing base calculations and amount of standby letters of credit outstanding with respect to the Wells Fargo Credit Agreement, and certain acquisition-related financing arrangements with respect to the CNH Industrial Capital credit facility. As of January 31, 2020, the Company was in compliance with the financial covenants under its credit agreements. Additional details on each of these credit facilities is disclosed in Note 8 to our consolidated financial statements included in this annual report.

As of January 31, 2020, the Company was not subject to the fixed charge ratio covenant under the Wells Fargo Credit Agreement as our adjusted excess availability plus eligible cash collateral (as defined in the Wells Fargo Credit Agreement) was not less than 15% of the total amount of the credit facility. The maturity date for the Wells Fargo Credit Agreement was October 28, 2020. Effective April 3, 2020, we entered into an amended and restated credit agreement with the Bank Syndicate, which has a maturity date of April 3, 2025. Please refer to Note 27 to our consolidated financial statement included in Item 8 for further information regarding the Company's line of credit.

Our equipment inventory turnover decreased to 1.5 times for fiscal 2020 compared to 1.8 times for fiscal 2019. Our equipment inventories amount increased 23.7% from January 31, 2019 to January 31, 2020. The increase in equipment sales volume in fiscal 2020 as compared to fiscal 2019 was offset by the increase in our average equipment inventory over these time periods. Our equity in equipment inventory, which reflects the portion of our equipment inventory balance that is not financed by floorplan payables, decreased to 27.9% as of January 31, 2020 from 34.4% as of January 31, 2019. The decrease in our equity in equipment inventory is primarily due to the stocking of new equipment inventories and the higher level of floorplan financing available on such inventories, and increased borrowing on our floorplan lines of credit following the repayment of our outstanding Senior Convertible Notes on May 1, 2019.

Senior Convertible Notes

The Company's Senior Convertible Notes had a maturity date of May 1, 2019. The outstanding principal balance of Senior Convertible Notes as of January 31, 2019 was $45.6 million. In fiscal 2020, the Company repaid the remaining

Table of Contents

outstanding Senior Convertible Notes, which repayment was primarily funded from non-manufacturer floorplan payables in addition to cash generated from business activities.

Long-Term Debt Facilities

As of January 31, 2020, we had a $60.0 million working capital line of credit under the Wells Fargo Credit Agreement (the "Working Capital Line"). Under the recently executed Bank Syndicate Facility Agreement, the Company's working capital line increased to $65.0 million. The Working Capital Line is used to finance our working capital requirements and fund certain capital expenditures. As of January 31, 2020, the Company had utilized $10.0 million or 17% of the Working Capital Line. The Company may also decide in the future to finance a portion of our rental fleet as well as our capital expenditures using long-term debt from various lenders.

Adequacy of Capital Resources

Our primary uses of cash have been to fund our operating activities, including the purchase of inventories and providing for other working capital needs; meeting our debt service requirements; making payments due under our various leasing arrangements; funding capital expenditures, including the purchase of rental fleet assets; and from time to time, opportunistically repurchasing our previously outstanding Senior Convertible Notes. The primary factor affecting our ability to generate cash and to meet cash requirements, is our operating performance as impacted by (i) industry factors, (ii) competition, (iii) general economic conditions, (iv) the timing and extent of acquisitions, and (v) business and other factors including those identified in Item 1A "Risk Factors" and discussed in this Form 10-K.

Our ability to service our debt will depend upon our ability to generate necessary cash. This will depend on our future acquisition activity, operating performance, general economic conditions, and financial, competitive, business and other factors, some of which are beyond our immediate control. Based on our current operational performance, we believe our cash flow from operations, available cash, and available borrowings under our existing credit facilities will be adequate to meet our liquidity needs for, at a minimum, the next 12 months.

In fiscal 2020, we used $14.3 million in cash for rental fleet purchases and $10.7 million in cash for property and equipment purchases and financed $11.0 million in property and equipment purchases with long-term debt and capital leases. The property and equipment purchases primarily related to the purchase of vehicles and improvements to, or purchase of, real estate assets. In fiscal 2019, we used $5.7 million in cash for rental fleet purchases, $6.3 million in cash for property and equipment purchases, and financed $5.2 million in property and equipment purchases with long-term debt. The property and equipment purchases primarily related to the purchase of vehicles, trucks and real estate. We expect our cash expenditures for property and equipment, exclusive of rental fleet purchases, for fiscal 2021 to be approximately $20.0 million and expect cash expenditures for our rental fleet for fiscal 2021 to be approximately $15.0 million. The actual amount of our fiscal 2021 capital expenditures will depend upon factors such as general economic conditions, growth prospects for our industry and our decisions regarding financing and leasing options. We currently expect to finance property and equipment purchases with borrowings under our existing credit facilities, financing with long-term debt, with available cash or with cash flow from operations. We may need to incur additional debt if we pursue any future acquisitions.

There can be no assurances, however, that our business will generate sufficient cash flow from operations or that future borrowings will be available under the credit facilities with the Bank Syndicate, CNH Industrial Capital and DLL Finance in amounts sufficient to allow us to service our indebtedness and to meet our other commitments. If we are unable to generate sufficient cash flow from operations or to obtain sufficient future borrowings, we may be required to seek one or more alternatives such as refinancing or restructuring our indebtedness, selling material assets or operations or seeking to raise additional debt or equity capital. There can be no assurances that we will be able to succeed with one of these alternatives on commercially reasonable terms, if at all. In addition, if we pursue strategic acquisitions, we may require additional equity or debt financing to consummate the transactions, and we cannot assure you that we will succeed in obtaining this financing on favorable terms or at all. If we incur additional indebtedness to finance any of these transactions, this may place increased demands on our cash flow from operations to service the resulting increased debt. Our existing debt agreements contain restrictive covenants that may restrict our ability to adopt any of these alternatives. Any non-compliance by us under the terms of our debt agreements could result in an event of default which, if not cured, could result in the acceleration of our debt. We have met all financial covenants under these credit agreements as of January 31, 2020. If anticipated operating results create the likelihood of a future covenant violation, we would seek to work with our lenders on an appropriate modification or amendment to our financing arrangements.

Table of Contents

Cash Flow

Cash Flow Provided By Operating Activities

Net cash provided by operating activities in fiscal 2020 was $1.0 million compared to $46.6 million in fiscal 2019. The decrease in net cash provided by operating activities of $45.6 million from fiscal 2019 to fiscal 2020 was primarily attributable to changes in inventory. We evaluate our cash flow from operating activities net of all floorplan payable activity and maintain a constant level of equity in our inventory. Taking these adjustments into account, our adjusted cash flow provided by operating activities was $17.8 million for fiscal 2020 compared to $47.4 million for fiscal 2019. For a reconciliation of this adjusted cash flow provided by operating activities to the comparative GAAP financial measure, refer to the Adjusted Cash Flow Reconciliation below.

Cash Flow Used For Investing Activities

Net cash used for investing activities is primarily comprised of cash used for property and equipment purchases, including rental fleet purchases, and for business acquisitions.

Net cash used for investing activities was $36.5 million in fiscal 2020, compared to $25.8 million in fiscal 2019. In fiscal 2020, the Company used $25.0 million of cash, compared to $12.0 million in fiscal 2019, for additional investment in our rental fleet, vehicles, capital improvements, and purchases of real estate. In addition, the Company utilized $13.9 million of cash, compared to $15.3 million in the prior fiscal year, for acquisitions.

Cash Flow Provided By (Used For) Financing Activities

Net cash provided by financing activities was $22.9 million in fiscal 2020, compared to net cash used for financing activities of $16.7 million in fiscal 2019. In fiscal 2020, net cash provided by financing activities was the result of increased non-manufacturer floorplan payables, the proceeds of which were partially used to repay $45.6 million face value of our Senior Convertible Notes, which matured on May 1, 2019. Additionally, in fiscal 2020, long-term financing proceeds of $18.9 million were utilized to purchase previously leased assets, vehicles and real estate.

Adjusted Cash Flow Reconciliation

We consider our cash flow from operating activities to include all equipment inventory financing activity regardless of whether we obtain the financing from a manufacturer or other source. GAAP requires the cash flows associated with non-manufacturer floorplan payables to be recognized as financing cash flows in the consolidated statement of cash flows. We consider equipment inventory financing with both manufacturers and other sources to be part of the normal operations of our business. We also evaluate our cash flow from operating activities by assuming a constant level of equity in our equipment inventory. Our equity in our equipment inventory reflects the portion of our equipment inventory balance that is not financed by floorplan payables. Our adjustment to maintain a constant level of equity in our equipment inventory is equal to the difference between our actual level of equity in equipment inventory at each period-end presented on the consolidated statements of cash flows compared to the actual level of equity in equipment inventory at the beginning of the fiscal year. We refer to this measure of cash flow as Adjusted Cash Flow.

Our equity in equipment inventory was 27.9% and 34.4% as of January 31, 2020 and 2019, respectively.

Adjusted Cash Flow is a non-GAAP financial measure. We believe that the presentation of Adjusted Cash Flow is relevant and useful to our investors because it provides information on activities we consider normal operations of our business, regardless of financing source and level of financing for our equipment inventory. The following table reconciles net cash provided by operating activities, a GAAP financial measure, to adjusted cash flow provided by operating activities; and net cash used for financing activities, a GAAP financial measure, to adjusted cash flow used for financing activities.



	Net Cash Provided by (Used for) Operating Activities						Net Cash Provided by (Used for) Financing Activities
	Year Ended January 31,						Year Ended January 31,
	2020			2019			2020			2019
	(in thousands)						(in thousands)
Cash Flow, As Reported	$	955		$	46,605		$	22,869		$	(16,727	)
Adjustment for Non-Manufacturer Floorplan Net Payments	50,158			16,818			(50,158		)	(16,818		)
Adjustment for Constant Equity in Equipment Inventory	(33,359		)	(16,030		)	—			—
Adjusted Cash Flow	$	17,754		$	47,393		$	(27,289	)	$	(33,545	)

Table of Contents

Certain Information Concerning Off-Balance Sheet Arrangements

As of January 31, 2020, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. We are, therefore, not exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in these relationships. In the normal course of our business activities, we lease real estate, vehicles and equipment under operating leases.

Contractual and Commercial Commitment Summary

Our contractual obligations and commercial commitments as of January 31, 2020 are summarized below:



			Payments Due By Period
Contractual Obligations	Total		Less Than 1 Year		1 to 3 Years		3 to 5 Years		More Than 5 Years
	(in thousands)
Long-term debt obligations (1)	$	74,798	$	18,466	$	15,330	$	15,522	$	25,480
Operating lease (2)	126,998		18,714		32,578		28,530		47,176
Purchase obligations (3)	18,207		4,850		7,232		6,125		—
Total	$	220,003	$	42,030	$	55,140	$	50,177	$	72,656


(1)	Includes obligations under our capital lease and financing obligations, long-term debt obligations and estimates of interest payable under all such obligations.

(2)

Includes minimum lease payment obligations under operating leases. Amounts do not include insurance or real estate taxes, which we include in our operating expenses and which we estimate will be approximately $2.3 million for the less than 1 year period, $4.3 million for the 1 to 3 year period, $3.9 million for the 3 to 5 year period, and $6.7 million for the more than 5 years period for a total of approximately $17.2 million. See Note 16 to our consolidated financial statements for a description of our operating lease obligations.


(3)	Primarily represents contracts related to information technology systems.

Information Regarding Forward-Looking Statements

The Private Securities Litigation Reform Act of 1995 provides a "safe harbor" for forward-looking statements. We include "forward-looking" information in this Form 10-K, including this Item 7, as well as in other materials filed or to be filed by us with the SEC (as well as information included in oral statements or other written statements made or to be made by us).

This Form 10-K contains forward-looking statements that involve risks and uncertainties. In some cases, you can identify forward-looking statements by the following words: "anticipate," "believe," "continue," "could," "estimate," "expect," "intend," "may," "ongoing," "plan," "potential," "predict," "project," "should," "will," "would," or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words. These statements involve known and unknown risks, uncertainties and other factors that may cause our or our industry's actual results, levels of activity, performance or achievements to be materially different from the information expressed or implied by these forward-looking statements. Forward-looking statements are only predictions and are not guarantees of performance. These statements are based on our management's beliefs and assumptions, which in turn are based on currently available information. Our forward-looking statements in this Form 10-K generally relate to the following:


•	our beliefs and intentions with respect to our growth strategies, including growth through strategic acquisitions, the types of acquisition targets we intend to pursue, the availability of suitable acquisition targets, the industry climate for dealer consolidation, and our ability to implement our growth strategies;


•	our beliefs with respect to factors that will affect demand and seasonality of purchasing in the agricultural and construction industries;


•	our beliefs with respect to our primary supplier (CNH Industrial) of equipment and parts inventory;


•	our beliefs with respect to the equipment market, our competitors and our competitive advantages;


•	our beliefs with respect to the impact of U.S federal government policies on the agriculture economy;


•	our beliefs with respect to the impact of commodity prices for the fossil fuels and other commodities on our operating results;


•	our beliefs with respect to the impact of government regulations;

Table of Contents


•	our beliefs with respect to our business strengths and the diversity of our customer base;


•	our plans and beliefs with respect to real property used in our business;


•	our plans and beliefs regarding future sales, sales mix, and marketing activities;


•	our beliefs and assumptions regarding the payment of dividends;


•	our beliefs and assumptions regarding valuation reserves, equipment inventory balances, fixed operating expenses, and absorption rate;


•	our beliefs and expectations regarding the effects of the political climate and economy in Ukraine;


•	our beliefs and assumptions with respect to our rental equipment operations;


•	our beliefs with respect to our employee relations;


•	our assumptions, beliefs and expectations with respect to past and future market conditions, including interest rates, and public infrastructure spending, new environmental standards, and the impact these conditions will have on our operating results;


•	our beliefs with respect to the impact of our credit agreements, including future interest expense, limits on corporate transactions, financial covenant compliance, and ability to negotiate amendments or waivers, if needed;


•	our beliefs with respect to the impact of increase or decrease in applicable foreign exchange rates;


•	our plans and assumptions for future capital expenditures;


•	our cash needs, sources of liquidity, and the adequacy of our working capital; and


•	our expectations regarding the impact of inflation.

Forward-looking statements are only predictions and are not guarantees of performance. These statements are based on our management's beliefs and assumptions, which in turn are based on currently available information. Important assumptions relating to the forward-looking statements include, among others, assumptions regarding demand for our products, the expansion of product offerings geographically, the timing and cost of planned capital expenditures, competitive conditions and general economic conditions. These assumptions could prove inaccurate. Forward-looking statements also involve known and unknown risks and uncertainties, which could cause actual results that differ materially from those contained in any forward-looking statement. Many of these factors are beyond our ability to control or predict. Such factors include, but are not limited to, the following:


•	incorrect assumptions regarding our cash needs and the amount of inventory we need on hand;


•	general economic conditions and construction activity in the markets where we operate;


•	our dependence of CNH Industrial and our relationships with other equipment suppliers;


•	our level of indebtedness and ability to comply with the terms of agreements governing our indebtedness;


•	the risks associated with the expansion of our business;


•	the risks resulting from outbreaks or other public health crises, including COVID-19;


•	the potential inability to integrate any businesses we acquire;


•	competitive pressures;


•	significant fluctuations in the price of our common stock


•	risks related to our dependence on our information technology systems and the impact of potential breaches and other disruptions


•	compliance with laws and regulations; and


•	other factors discussed under "Risk Factors" or elsewhere in this Form 10-K.

You should read the risk factors and the other cautionary statements made in this Form 10-K as being applicable to all related forward-looking statements wherever they appear in this Form 10-K. We cannot assure you that the forward-looking statements in this Form 10-K will prove to be accurate. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans

Table of Contents

in any specified timeframe, if at all. Other than as required by law, we undertake no obligation to update these forward-looking statements, even though our situation may change in the future.

Table of Contents

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to various market risks, including changes in interest rates and foreign currency exchange rates. Market risk is the potential loss arising from adverse changes in market rates and prices such as interest rates and foreign currency exchange rates.

Interest Rate Risk

Exposure to changes in interest rates results from borrowing activities used to fund operations. For fixed rate debt, interest rate changes affect the fair value of financial instruments but do not impact earnings or cash flows. Conversely, for floating rate debt, interest rate changes generally do not affect the fair market value but do impact future earnings and cash flows, assuming other factors are held constant. We have both fixed and floating rate financing. Some of our floating rate credit facilities contain minimum rates of interest to be charged. Based upon our interest-bearing balances and interest rates as of January 31, 2020, holding other variables constant, a one percentage point increase in interest rates for the next 12-month period would decrease pre-tax earnings and cash flow by approximately $1.8 million. Conversely, a one percentage point decrease in interest rates for the next 12-month period would result in an increase to pre-tax earnings and cash flow of approximately $1.8 million. At January 31, 2020, we had total floorplan payables of $371.8 million, of which $166.6 million was interest-bearing at variable interest rates and $205.2 million was non-interest bearing. In addition, at January 31, 2020, we had total long-term debt of $57.4 million, all of which was fixed rate debt.

Foreign Currency Exchange Rate Risk

Our foreign currency exposures arise as the result of our foreign operations. We are exposed to transactional foreign currency exchange rate risk through our foreign entities holding assets and liabilities denominated in currencies other than their functional currency. In addition, the Company is exposed to foreign currency transaction risk as a result of certain intercompany financing transactions. The Company attempts to manage its transactional foreign currency exchange rate risk through the use of derivative financial instruments, primarily foreign exchange forward contracts, or through natural hedging instruments. Based upon balances and exchange rates as of January 31, 2020, holding other variables constant, we believe that a hypothetical 10% increase or decrease in all applicable foreign exchange rates would not have a material impact on our results of operations or cash flows. As of January 31, 2020, our Ukrainian subsidiary had $3.8 million of net monetary assets denominated in Ukrainian hryvnia (UAH). We have attempted to minimize our net monetary asset position through reducing overall asset levels in Ukraine and through borrowing in UAH which serves as a natural hedging instrument offsetting our net UAH denominated assets. At certain times, currency and payment controls imposed by the National Bank of Ukraine have limited our ability to manage our net monetary asset position. While the UAH remained relatively stable in fiscal 2019, an escalation of political tensions or economic instability could lead to significant UAH devaluations, which could have a material impact on our results of operations and cash flows.

In addition to transactional foreign currency exchange rate risk, we are also exposed to translational foreign currency exchange rate risk as we translate the results of operations and assets and liabilities of our foreign operations from their functional currency to the U.S. dollar. As a result, our results of operations, cash flows and net investment in our foreign operations may be adversely impacted by fluctuating foreign currency exchange rates. We believe that a hypothetical 10% increase or decrease in all applicable foreign exchange rates, holding all other variables constant, would not have a material impact on our results of operations or cash flows.

Table of Contents

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The Consolidated Balance Sheets of the Company as of January 31, 2020 and 2019, and the related Consolidated Statements of Operations, Comprehensive Income (Loss), Stockholders' Equity, and Cash Flows for the years ended January 31, 2020, 2019 and 2018, and the notes thereto, have been audited by Deloitte & Touche LLP, an independent registered public accounting firm.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS



	Page
Titan Machinery Inc.—Financial Statements
Audited Consolidated Financial Statements
Report of Independent Registered Public Accounting Firm	45
Report of Independent Registered Public Accounting Firm	46
Consolidated Balance Sheets as of January 31, 2020 and 2019	47
Consolidated Statements of Operations for the fiscal years ended January 31, 2020, 2019 and 2018	48
Consolidated Statements of Comprehensive Income (Loss) for the fiscal years ended January 31, 2020, 2019 and 2018	49
Consolidated Statements of Stockholders' Equity for the fiscal years ended January 31, 2020, 2019 and 2018	50
Consolidated Statements of Cash Flows for the fiscal years ended January 31, 2020, 2019 and 2018	51
Notes to Consolidated Financial Statements	52

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of Titan Machinery Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Titan Machinery Inc. and subsidiaries (the “Company”) as of January 31, 2020 and 2019, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the three years in the period ended January 31, 2020, and the related notes and the schedule listed in the Index at Item 15 (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of January 31, 2020 and 2019, and the results of its operations and its cash flows for each of the three years in the period ended January 31, 2020, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of January 31, 2020, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated April 6, 2020, expressed an unqualified opinion on the Company’s internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

DELOITTE & TOUCHE LLP

Minneapolis, Minnesota

April 6, 2020

We have served as the Company's auditor since 2013.

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of Titan Machinery Inc.

Opinion on Internal Control over Financial Reporting

We have audited the internal control over financial reporting of Titan Machinery Inc. and subsidiaries (the "Company") as of January 31, 2020, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of January 31, 2020, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements and financial statement schedule as of and for the fiscal year ended January 31, 2020, of the Company and our report dated April 6, 2020, expressed an unqualified opinion on those consolidated financial statements and financial statement schedule.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

DELOITTE & TOUCHE LLP

Minneapolis, Minnesota

April 6, 2020

Table of Contents

TITAN MACHINERY INC.

CONSOLIDATED BALANCE SHEETS

AS OF JANUARY 31, 2020 AND 2019

(in thousands, except per share data)



	January 31, 2020			January 31, 2019
Assets
Current Assets
Cash	$	43,721		$	56,745
Receivables, net of allowance for doubtful accounts	72,776			77,500
Inventories	597,394			491,091
Prepaid expenses and other	13,655			15,556
Total current assets	727,546			640,892
Noncurrent Assets
Property and equipment, net of accumulated depreciation	145,562			138,950
Operating lease assets	88,281			—
Deferred income taxes	2,147			3,010
Goodwill	2,327			1,161
Intangible assets, net of accumulated amortization	8,367			7,247
Other	1,113			1,178
Total noncurrent assets	247,797			151,546
Total Assets	$	975,343		$	792,438

Liabilities and Stockholders' Equity
Current Liabilities
Accounts payable	$	16,976		$	16,607
Floorplan payable	371,772			273,756
Senior convertible notes	—			45,249
Current maturities of long-term debt	13,779			2,067
Current maturities of operating leases	12,259			—
Deferred revenue	40,968			46,409
Accrued expenses and other	38,409			36,364
Total current liabilities	494,163			420,452
Long-Term Liabilities
Long-term debt, less current maturities	37,789			20,676
Operating lease liabilities	88,387			—
Deferred income taxes	2,055			4,955
Other long-term liabilities	7,845			11,044
Total long-term liabilities	136,076			36,675
Commitments and Contingencies (Notes 14 and 15)
Stockholders' Equity
Common stock, par value $0.00001 per share, 45,000 shares authorized; 22,335 shares issued and outstanding at January 31, 2020; 22,218 shares issued and outstanding at January 31, 2019	—			—
Additional paid-in-capital	250,607			248,423
Retained earnings	97,717			89,228
Accumulated other comprehensive loss	(3,220		)	(2,340		)
Total stockholders' equity	345,104			335,311
Total Liabilities and Stockholders' Equity	$	975,343		$	792,438

See Notes to Consolidated Financial Statements

Table of Contents

TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

YEARS ENDED JANUARY 31, 2020, 2019 AND 2018

(in thousands, except per share data)



	2020			2019			2018
Revenue
Equipment	$	917,202		$	909,178		$	844,768
Parts	234,217			210,796			203,231
Service	99,165			86,840			88,794
Rental and other	54,587			54,691			55,813
Total Revenue	1,305,171			1,261,505			1,192,606
Cost of Revenue
Equipment	818,707			812,467			764,649
Parts	165,190			149,615			143,729
Service	33,446			29,036			30,679
Rental and other	37,010			38,799			38,249
Total Cost of Revenue	1,054,353			1,029,917			977,306
Gross Profit	250,818			231,588			215,300
Operating Expenses	225,722			201,537			203,203
Impairment of Long-Lived Assets	3,764			2,156			673
Restructuring Costs	—			414			10,499
Income from Operations	21,332			27,481			925
Other Income (Expense)
Interest income and other income (expense)	3,126			2,547			1,635
Floorplan interest expense	(5,354		)	(6,114		)	(8,152		)
Other interest expense	(4,452		)	(7,760		)	(8,847		)
Income (Loss) Before Income Taxes	14,652			16,154			(14,439		)
Provision for (Benefit from) Income Taxes	699			3,972			(7,390		)
Net Income (Loss)	$	13,953		$	12,182		$	(7,049	)

Earnings (Loss) per Share:
Basic	$	0.63		$	0.55		$	(0.32	)
Diluted	$	0.63		$	0.55		$	(0.32	)

Weighted Average Common Shares:
Basic	21,946			21,809			21,543
Diluted	21,953			21,816			21,543

See Notes to Consolidated Financial Statements

Table of Contents

TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

YEARS ENDED JANUARY 31, 2020, 2019 AND 2018

(in thousands)



	2020			2019			2018
Net Income (Loss)	$	13,953		$	12,182		$	(7,049	)
Other Comprehensive Income (Loss)
Foreign currency translation adjustments	(880		)	(640		)	2,399
Cash flow hedging instruments, net of tax	—			—			684
Total Other Comprehensive Income (Loss)	(880		)	(640		)	3,083
Comprehensive Income (Loss)	$	13,073		$	11,542		$	(3,966	)

See Notes to Consolidated Financial Statements

Table of Contents

TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY

YEARS ENDED JANUARY 31, 2020, 2019 AND 2018

(in thousands)



	Common Stock			Additional Paid-In Capital			Retained Earnings			Accumulated Other Comprehensive Income (Loss)			Total Stockholders' Equity
	Shares Outstanding	Amount		Additional Paid-In Capital			Retained Earnings			Accumulated Other Comprehensive Income (Loss)			Total Stockholders' Equity
BALANCE, JANUARY 31, 2017	21,836	$	—	$	240,615		$	85,347		$	(4,783	)	$	321,179
ASU 2016-19 cumulative effect adjustment	—	—		2,087			(1,252		)	—			835
Common stock issued on grant of restricted stock and exercise of stock options, net of restricted stock forfeitures and restricted stock withheld for employee withholding tax	266	—		989			—			—			989
Stock-based compensation expense	—	—		3,441			—			—			3,441
Repurchase of senior convertible notes	—	—		(623		)	—			—			(623		)
Net loss	—	—		—			(7,049		)	—			(7,049		)
Other comprehensive loss	—	—		—			—			3,083			3,083
BALANCE, JANUARY 31, 2018	22,102	—		246,509			77,046			(1,700		)	321,855
Common stock issued on grant of restricted stock and exercise of stock options, net of restricted stock forfeitures and restricted stock withheld for employee withholding tax	116	—		(621		)	—			—			(621		)
Stock-based compensation expense	—	—		2,535			—			—			2,535
Net Income	—	—		—			12,182			—			12,182
Other comprehensive income	—	—		—			—			(640		)	(640		)
BALANCE, JANUARY 31, 2019	22,218	—		248,423			89,228			(2,340		)	335,311
ASU 2016-02 cumulative effect adjustment	—	—		—			(5,464		)	—			(5,464		)
Common stock issued on grant of restricted stock, net of restricted stock forfeitures and restricted stock withheld for employee withholding tax	117	—		(509		)	—			—			(509		)
Stock-based compensation expense	—	—		2,693			—			—			2,693
Net income	—	—		—			13,953			—			13,953
Other comprehensive loss	—	—		—			—			(880		)	(880		)
BALANCE, JANUARY 31, 2020	22,335	$	—	$	250,607		$	97,717		$	(3,220	)	$	345,104

See Notes to Consolidated Financial Statements

Table of Contents

TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

YEARS ENDED JANUARY 31, 2020, 2019 AND 2018

(in thousands)



	2020			2019			2018
Operating Activities
Net income (loss)	$	13,953		$	12,182		$	(7,049	)
Adjustments to reconcile net income (loss) to net cash provided by operating activities
Depreciation and amortization	28,067			23,605			25,105
Impairment	3,764			2,156			673
Deferred income taxes	(1,663		)	2,511			(8,920		)
Stock-based compensation expense	2,693			2,535			3,441
Noncash interest expense	408			2,432			3,651
Noncash lease expense	12,234			—			—
Loss (gain) on repurchase of senior convertible notes	—			615			(22		)
Other, net	(388		)	995			(2,406		)
Changes in assets and liabilities
Receivables, prepaid expenses and other assets	6,217			(13,475		)	(1,002		)
Inventories	(99,469		)	4,996			20,338
Manufacturer floorplan payable	49,601			(2,635		)	46,141
Accounts payable, deferred revenue, accrued expenses and other and other long-term liabilities	(1,890		)	10,688			15,862
Operating lease liability	(12,572		)	—			—
Net Cash Provided by Operating Activities	955			46,605			95,812
Investing Activities
Rental fleet purchases	(14,302		)	(5,665		)	(12,578		)
Property and equipment purchases (excluding rental fleet)	(10,714		)	(6,286		)	(13,537		)
Proceeds from sale of property and equipment	2,415			1,549			5,030
Acquisition consideration, net of cash acquired	(13,887		)	(15,299		)	(3,652		)
Other, net	19			(131		)	148
Net Cash Used for Investing Activities	(36,469		)	(25,832		)	(24,589		)
Financing Activities
Net change in non-manufacturer floorplan payable	50,158			16,818			(38,626		)
Principal payments on senior convertible notes	(45,644		)	(20,025		)	(29,093		)
Proceeds from long-term debt borrowings	23,354			3,252			33,001
Principal payments on long-term debt	(4,490		)	(16,116		)	(36,786		)
Other, net	(509		)	(656		)	38
Net Cash Provided by (Used for) Financing Activities	22,869			(16,727		)	(71,466		)
Effect of Exchange Rate Changes on Cash	(379		)	(697		)	488
Net Change in Cash	(13,024		)	3,349			245
Cash at Beginning of Period	56,745			53,396			53,151
Cash at End of Period	$	43,721		$	56,745		$	53,396
Supplemental Disclosures of Cash Flow Information
Cash paid (received) during the period
Income taxes, net of refunds	$	3,656		$	3,681		$	(5,555	)
Interest	$	9,687		$	11,064		$	13,634
Supplemental Disclosures of Noncash Investing and Financing Activities
Net property and equipment financed with long-term debt, capital leases, accounts payable and accrued liabilities	$	11,039		$	5,230		$	752
Business combination assets acquired through direct financing	$	—		$	—		$	871
Net transfer of assets from property and equipment to inventories	$	2,544		$	5,263		$	3,609

See Notes to Consolidated Financial Statements

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1 - BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES

Nature of Business

Titan Machinery Inc. and its subsidiaries (collectively, the "Company") are engaged in the retail sale, service and rental of agricultural and construction machinery through its stores in the United States and Europe. The Company's North American stores are located in Arizona, Colorado, Iowa, Minnesota, Montana, Nebraska, North Dakota, South Dakota, Wisconsin and Wyoming, and its European stores are located in Bulgaria, Germany, Romania, Serbia and Ukraine.

Seasonality

The agricultural and construction equipment businesses are highly seasonal, which causes the Company's quarterly results and cash flows to fluctuate during the year. The Company's customers generally purchase and rent equipment in preparation for, or in conjunction with, their busy seasons, which for farmers are the spring planting and fall harvesting seasons, and for Construction customers is dependent on weather seasons in their respective regions, which is typically the second and third quarters of the Company's fiscal year for much of its Construction footprint. The Company's parts and service revenues are typically highest during its customers' busy seasons as well, due to the increased use of their equipment during this time, which generates the need for more parts and service work. However, weather conditions impact the timing of our customers' busy times, which may cause the Company's quarterly financial results to differ between fiscal years. In addition, the fourth quarter typically is a significant period for equipment sales in the U.S. because of our customers’ year-end tax planning considerations, the timing of dealer incentives and the increase in availability of funds from completed harvests and construction projects.

Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant accounts, transactions and profits between the consolidated companies have been eliminated in consolidation.

The Company's foreign subsidiaries have fiscal years ending on December 31 of each year, consistent with statutory reporting requirements in each of the respective countries. The accounts of the Company's foreign subsidiaries are consolidated as of December 31 of each year. No events or transactions occurred related to these subsidiaries in January 2020 that would have materially affected the consolidated financial position, results of operations or cash flows.

Reclassifications

Concurrent with the adoption of the new lease accounting standard guidance, the Company elected to reclassify finance lease liabilities in the accompanying consolidated balance sheet as of January 31, 2019 to maintain consistency and comparability between periods presented. The amounts reclassified included $1.3 million from current maturities of long-term debt to accrued expenses and other and $5.1 million from long-term debt, less current maturities to other long-term liabilities. Theses reclassifications had no impact on total current liabilities, total long-term liabilities or total liabilities and stockholders' equity within the consolidated balance sheet.

Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates, particularly related to realization of inventory, impairment of long-lived assets, collectability of receivables, and income taxes.

Concentrations of Credit Risk

The Company's sales are to agricultural and construction equipment customers principally in the U.S. states and European countries in which its stores are located. The Company extends credit to its customers in the ordinary course of business and monitors its customers' financial condition to minimize its risks associated with trade receivables; however, the Company does not generally require collateral on trade receivables.

The Company's cash balances are maintained in bank deposit accounts, which, at times, are in excess of federally insured limits.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Concentrations in Operations

The Company currently purchases new equipment, rental equipment and the related parts from a limited number of manufacturers. Although no change in suppliers is anticipated, the occurrence of such a change could cause a possible loss of sales and adversely affect operating results. The Company is the holder of authorized dealerships granted by CNH Industrial America, LLC and CNHI International SA (collectively referred to "CNH Industrial") whereby it has the right to act as an authorized dealer for the entity's equipment at specified locations. The dealership authorizations and floorplan payable facilities can be canceled by the respective entity if the Company does not observe certain established guidelines and covenants.

In addition, the Company believes that the following factors related to concentrations in suppliers, and in particular CNH Industrial, have a significant impact on its operating results:

•CNH Industrial's product offerings, reputation and market share

•CNH Industrial's product prices and incentive and discount programs

•Supply of inventory from CNH Industrial


•	CNH Industrial provides floorplan payable financing for the purchase of a substantial portion of the Company's inventory


•	CNH Industrial provides a significant percentage of the financing and lease financing used by the Company's customers to purchase CNH Industrial equipment from the Company

Revenue Recognition

Revenues are recognized when control of the promised goods or services is transferred to the customer, in an amount that reflects the consideration the Company expects to collect in exchange for those goods or services. Shipping and handling costs are recorded as cost of revenue. Sales, value added and other taxes collected from the Company's customers concurrent with the Company's revenue activities are excluded from revenue.

Equipment Revenue. Equipment revenue transactions include the sale of new and used agricultural and construction equipment. The Company satisfies its performance obligations and recognizes revenue at a point in time, primarily upon the delivery of the product. Once a product is delivered, the customer has physical possession of the asset, can direct the use of the asset, and has the significant risks and rewards of ownership of the asset. Equipment transactions often include both cash and non-cash consideration. Cash consideration is paid directly by the Company's customers or by third-party financial institutions financing the Company's customer transactions. Non-cash consideration is in the form of trade-in equipment assets. The Company assigns a value to trade-in assets by estimating a future selling price, which the Company estimates based on relevant internal and third-party data, less a gross profit amount to be realized at the time the trade-in asset is sold and an estimate of any reconditioning work required to ready the asset for sale. Both cash and non-cash consideration may be received prior to or after the Company's performance obligation is satisfied. Any consideration received prior to the satisfaction of the Company's performance obligation is recognized as deferred revenue. Receivables recognized for amounts not paid at the time our performance obligation is satisfied, including amounts due from third-party financial institutions, generally do not have established payment terms but are collected in relatively short time periods.

For certain equipment sale transactions, the Company provides a residual value guarantee to CNH Industrial Capital in connection with a customer leasing arrangement in which the Company sells the equipment to CNH Industrial Capital, who simultaneously executes a leasing arrangement with the Company's end-user customer. The amount of revenue recognized for the sale of the equipment asset is reduced by, and the Company recognizes a corresponding liability equal to, our estimate of the amount that is probable of being paid under the guarantee discounted at a rate of interest to reflect the risk inherent in the liability.

Also included in equipment revenue are net commissions earned for serving as the agent in facilitating sales of equipment assets the Company holds as consignee on behalf of the consignor, as well as net commissions earned for facilitating the sale of extended warranty protection plans provided by the Company's suppliers or third-party insurance providers.

We have elected, as a practical expedient, to recognize sales commissions earned on the sale of equipment inventory as an expense when incurred; because the amortization period of this cost, if it was otherwise capitalized, would be less than one year. These costs are recorded in operating expenses in our consolidated statements of operations.

Parts Revenue. We sell a broad range of maintenance and replacement parts for both equipment that we sell and other types of equipment. The Company satisfies its performance obligation and recognizes revenue at a point in time, upon delivery

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

of the product to the customer. Once a product is delivered, the Company has a present right to payment, the customer has physical possession of the asset, can direct the use of the asset, and has the significant risks and rewards of ownership of the asset. In many cases, customers tender payment at the time of delivery. Balances not paid at the time of delivery are typically due in full within 30 days. Most parts are sold with a thirty-day right of return or exchange. Historically, parts returns have not been material.

Parts revenue also includes the retail value of parts inventories consumed during the course of customer repair and maintenance services and services provided under manufacturer warranties. As further described below, we recognize revenue from these activities over time.

Service Revenue. We provide repair and maintenance services, including repairs performed under manufacturer warranties, for our customer’s equipment. We recognize service and associated parts revenue of our repair and maintenance services over time as we transfer control of these goods and services over time. The Company recognizes revenue over time in the amount to which we have the right to invoice the customer, as such an amount corresponds to the value of our performance completed to date. Generally, the Company has the right to invoice the customer for labor hours incurred and parts inventories consumed during the performance of the service arrangement. Customer invoicing most often occurs at the conclusion of our repair and maintenance services. Accordingly, we recognize unbilled receivables for the amount of unbilled labor hours incurred and parts inventories consumed under our repair and maintenance arrangements. Upon customer invoicing, unbilled receivables are reclassified to receivables. In many cases, customers tender payment at the completion of our work and the creation of the invoice. Balances not paid at the time of invoicing are typically due in full within 30 days.

Other Revenue. Other revenues primarily consist of fees charged in connection with short-haul equipment delivery and pick-up services, in which revenue is recognized at a point in time when the service is completed, and Global Positioning System ("GPS") signal subscriptions, in which revenue is recognized on a straight-line basis over the subscription period.

Rental Revenue. We rent equipment to our customers on a short-term basis for periods ranging from a few days to a few months. Rental revenue is recognized on a straight-line basis over the period of the related rental agreement. Revenue from rental equipment delivery and pick-up services is recognized when the service is performed.

Manufacturer Incentives and Discounts

The Company receives various manufacturer incentives and discounts, which are based on a variety of factors. Discounts and incentives related to the purchase of inventory are recognized as a reduction of inventory prices and recognized as a reduction of cost of revenue when the related inventory is sold. Other incentives, reflecting reimbursement of qualifying expenses, are recognized as a reduction of the related expense when earned.

Receivables and Credit Policy

Trade accounts receivable due from customers are uncollateralized customer obligations due under normal trade terms requiring payment within 30 to 90 days from the invoice date. Balances unpaid after the due date based on trade terms are considered past due and begin to accrue interest. Payments of trade receivables are allocated to the specific invoices identified on the customer's remittance advice or, if unspecified, are applied to the earliest unpaid invoices. Trade accounts receivable due from manufacturers relate to discount programs and incentive programs. Trade accounts receivable due from finance companies primarily consist of contracts in transit with finance companies and balances due from credit card companies. These receivables do not generally have established payment terms but are collected in relatively short time periods. Unbilled receivables represent unbilled labor hours incurred and parts inventories consumed during the performance of service arrangements for our customers at their retail rates.

The carrying amount of trade receivables is reduced by a valuation allowance that reflects management's best estimate of the amounts that will not be collected. Management reviews aged receivable balances and estimates the portion, if any, of the balance that will not be collected. Account balances are charged off after all appropriate means of collection have been exhausted and the potential for recovery is considered remote.

Inventories

New and used equipment are stated at the lower of cost (specific identification) or net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. All new and used equipment inventories, including that which has been rented, are subject to periodic lower of cost or net realizable value evaluation that considers various factors including aging of equipment and market conditions. Equipment inventory values are adjusted whenever the carrying amount exceeds the net realizable value. Parts inventories are

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

valued at the lower of average cost or net realizable value. The Company estimates its lower of cost or net realizable value adjustments on its parts inventories based on various factors including aging and sales of each type of parts inventory. Work in process represents costs incurred in the reconditioning and preparation for sale of our equipment inventories.

Property and Equipment

Property and equipment is carried at cost less accumulated depreciation and amortization. Depreciation and amortization are computed on a straight-line basis over the estimated useful life of each asset, as summarized below:



Buildings and leasehold improvements	Lesser of 10 - 40 years or lease term
Machinery and equipment	3 - 10 years
Furniture and fixtures	3 - 10 years
Vehicles	5 - 10 years
Rental fleet	3 - 10 years

Depreciation for income tax reporting purposes is computed using accelerated methods.

Goodwill

Goodwill is recognized and initially measured as any excess of the acquisition-date consideration transferred in a business combination over the acquisition-date amounts recognized for the net identifiable assets acquired. Goodwill is not amortized but is tested for impairment annually, or more frequently if an event occurs or circumstances change that would more likely than not result in an impairment of goodwill. Impairment testing is performed at the reporting unit level. A reporting unit is defined as an operating segment or one level below an operating segment, referred to as a component. A component of an operating segment is a reporting unit if the component constitutes a business for which discrete financial information is available and segment management regularly reviews the operating results of that component. After implementing new authoritative guidance regarding goodwill impairment on February 1, 2018, the goodwill impairment analysis is a single-step quantitative assessment that identifies both the existence of impairment and the amount of impairment loss by comparing the estimated fair value of a reporting unit to its carrying value, with any excess carrying value over the fair value being recognized as an impairment loss, limited to the total amount of goodwill allocated to that reporting unit. The Company performs its annual goodwill impairment test as of December 31st of each year and has identified two reporting units that carry a goodwill balance.

Intangible Assets

Intangible assets with a finite life consist of customer relationships and covenants not to compete, and are carried at cost less accumulated amortization. The Company amortizes the cost of identified intangible assets on a straight-line basis over the expected period of benefit, which is generally three years for customer relationships and the contractual term for covenants not to compete, which range from five to ten years.

Intangible assets with an indefinite life consist of distribution rights with manufacturers. Distribution rights are classified as an indefinite-lived intangible asset because the Company's distribution agreements continue indefinitely by their terms, or are routinely awarded or renewed without substantial cost or material modifications to the underlying agreements. Accordingly, the Company believes that its distribution rights intangible assets will contribute to its cash flows for an indefinite period, therefore the carrying amount of distribution rights is not amortized, but is tested for impairment annually, or more frequently upon the occurrence of certain events or when circumstances indicate that impairment may be present. The impairment test is a single-step assessment that identifies both the existence of impairment and the amount of impairment loss by comparing the estimated fair value of the asset to its carrying value, with any excess carrying value over the fair value being recognized as an impairment loss. The Company performs its annual impairment test as of December 31st of each year.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Impairment of Long-Lived Assets

The Company's long-lived assets consist of its intangible assets and property and equipment. These assets are reviewed for potential impairment when events or circumstances indicate that the carrying value may not be recoverable. Recoverability is measured by comparing the estimated future undiscounted cash flows of such assets to their carrying values. If the estimated undiscounted cash flows exceed the carrying value, the carrying value is considered recoverable and no impairment recognition is required. However, if the sum of the undiscounted cash flows is less than the carrying value of the asset, the second step of the impairment analysis must be performed to measure the amount of impairment, if any. The second step of the impairment analysis compares the estimated fair value of the long-lived asset to its carrying value and any amount by which the carrying value exceeds the fair value is recognized as an impairment charge.

During the year ended January 31, 2020, the Company determined that certain events or circumstances, including a current period operating loss combined with historical losses and anticipated future operating losses, within certain of its stores was an indication that the long-lived assets of these stores may not be recoverable. The aggregate carrying value of such assets totaled $9.4 million. In light of these circumstances, the Company performed step one of the long-lived asset impairment analysis for these assets and concluded that the carrying value was not recoverable. Accordingly, the Company performed step two of the impairment analysis and estimated the fair value of the assets using an income approach. The Company recognized total impairment charges of $3.1 million, of which $2.3 million related to the Agriculture segment and $0.8 million related to the Construction segment. All impairment charges recognized are included in the Impairment of Long-Lived Assets amount in the consolidated statements of operations.

We performed similar impairment analyses at the end of fiscal 2019 and 2018. The Company recognized impairment charges totaling $2.2 million on long-lived assets during the year ended January 31, 2019, of which $0.9 million related to the Agriculture segment, $1.1 million related to the Construction segment, and $0.2 million related to the International segment. The Company recognized impairment charges totaling $0.7 million on long-lived assets during the year ended January 31, 2018, of which $0.2 million related to the Agriculture segment and $0.5 million related to the Construction segment.

Construction of Leased Assets and Sale-Leaseback Accounting

The Company from time to time performs construction projects on its store locations, which are recorded as property and equipment in the consolidated balance sheet during the construction period. Upon completion, these assets are either placed in service, at which point the depreciation of the asset commences, or are part of a sale-leaseback transaction with a third-party buyer/lessor. In certain other situations the Company enters into build-to-suit construction projects with third-party lessors. Under the applicable lease accounting rules, certain forms of lessee involvement in the construction of the leased asset deem the Company to be the owner of the leased asset during the construction period and requires capitalization of the lessor's total project costs on the consolidated balance sheet with the recognition of a corresponding financing obligation. Upon completion of a project for which the constructed assets are sold to a buyer/lessor or the completion of a capitalized build-to suit construction project, the Company performs a sale-leaseback analysis to determine if the asset and related financing obligation can be derecognized from the consolidated balance sheet. Certain provisions in a number of our lease agreements, primarily provisions regarding repurchase options, are deemed to be continuing involvement in the sold asset which precludes sale recognition. In such cases, the asset remains on the consolidated balance sheet under property and equipment and the proceeds received in the sale-leaseback transaction are recognized as a financing obligation under long-term debt in the consolidated balance sheet. Both the asset and the financing obligation are amortized over the lease term. In instances in which the Company has no continuing involvement in the sold asset, the criteria for sale recognition are met and the asset and any related financing obligation are derecognized from the consolidated balance sheet, and the lease is analyzed for proper accounting treatment as either an operating or finance lease.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Exit and Disposal Costs

Costs related to exit or disposal activities, including store closures, for the Company primarily include lease termination costs, employee termination benefits and other costs associated with moving assets and vacating the stores. The Company records a liability at the net present value of the remaining lease obligations, net of estimated sublease income, as of the date the Company ceases using the property, including removal of any Company assets. Any subsequent adjustments to that liability as a result of changes in estimates are recorded in the period incurred. The Company records a liability for employee termination costs on the date when management, with appropriate approval, has a formal plan, the plan identifies the number of employees by function with the expected date of termination, benefits for the employees have been identified, the plan is unlikely to be changed and the termination benefits have been communicated to the employees. Other related costs are expensed as incurred.

Derivative Instruments

In the normal course of business, the Company is subject to risk from adverse fluctuations in foreign currency exchange rates and benchmark interest rates. The Company may manage its market risk exposures through a program that includes the use of derivative instruments, primarily foreign exchange forward contracts and interest rate derivatives. The Company's objective in managing its exposure to market risk is to minimize the impact on earnings, cash flows and the consolidated balance sheet. The Company does not use derivative instruments for trading or speculative purposes.

All outstanding derivative instruments are recognized in the consolidated balance sheet at fair value. The effect on earnings from recognizing the fair value of the derivative instrument depends on its intended use, the hedge designation, and the effectiveness in offsetting the exposure of the underlying hedged item. Changes in fair values of instruments designated to reduce or eliminate fluctuations in the fair values of recognized assets and liabilities and unrecognized firm commitments are reported currently in earnings along with the change in the fair value of the hedged items. Changes in the effective portion of the fair values of derivative instruments used to reduce or eliminate fluctuations in cash flows of forecasted transactions are reported in other comprehensive income (loss), a component of stockholders' equity. Amounts accumulated in other comprehensive income (loss) are reclassified to earnings when the related hedged items affect earnings or the anticipated transactions are no longer probable. Changes in the fair value of derivative instruments designated to reduce or eliminate fluctuations in the net investment of a foreign subsidiary are reported in other comprehensive income. Changes in the fair value of derivative instruments that are not designated as hedging instruments or do not qualify for hedge accounting treatment are reported currently in earnings. The cash flows related to derivative instruments that are accounted for as cash flow hedges are classified in the same category on the consolidated statements of cash flow as the cash flows from the items being hedged.

For derivative instruments accounted for as hedging instruments, the Company formally designates and documents, at inception, the instrument as a hedge of a specific underlying exposure, the risk management objective and the manner by which the effectiveness of the hedging instrument will be evaluated. At each reporting period after inception, the Company evaluates the hedging instrument's effectiveness in reducing or eliminating the underlying hedged exposure. Any hedge ineffectiveness is recognized in earnings immediately.

Income Taxes

The Company uses the asset and liability method to account for income taxes. Under this method, deferred tax assets and liabilities are recognized for the expected future tax consequences of differences between the carrying amounts of assets and liabilities and their respective tax bases. Deferred tax assets are reduced by a valuation allowance when it is more likely than not that a portion or all of the deferred tax assets will not be realized. Changes in valuation allowances are included in its provision for income taxes in the period of the change. Deferred tax assets and liabilities are netted by taxing jurisdiction and presented as either a net asset or liability position, as applicable, on the consolidated balance sheets.

The Company recognizes the financial statement benefit of income tax positions only if those positions are more likely than not of being sustained. Recognized income tax positions are measured as the largest amount that has a greater than 50% likelihood of being realized. Changes in the recognition or measurement of such positions are reflected in its provision for income taxes in the period of the change. The Company's policy is to recognize interest and penalties related to income tax matters within its provision for income taxes.

Advertising Costs

Costs incurred for producing and distributing advertising are expensed as incurred. Advertising expense amounted to $2.2 million, $2.1 million and $2.2 million for the years ended January 31, 2020, 2019 and 2018.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Stock-Based Compensation

The Company accounts for stock-based compensation at the fair value of the related equity instrument over the applicable service or performance period.

Comprehensive Income and Foreign Currency Matters

For the Company, comprehensive income (loss) represents net income adjusted for foreign currency translation adjustments and unrealized gains or losses on cash flow hedging derivative instruments. For its foreign subsidiaries in which their local currency is their functional currency, assets and liabilities are translated into U.S. dollars at the balance sheet date exchange rate. Income and expenses are translated at average exchange rates for the year. Foreign currency translation adjustments are recorded directly as other comprehensive income (loss), a component of stockholders' equity. For its foreign subsidiaries in which the local currency is not the functional currency, prior to translation into U.S. dollars, amounts must first be remeasured from the local currency into the functional currency. Nonmonetary assets and liabilities are remeasured at historical exchange rates and monetary assets and liabilities are remeasured at the balance sheet date exchange rate. Income and expenses are remeasured at average exchange rates for the year. Foreign currency remeasurement adjustments are included in the statement of operations.

The Company recognized, in interest income and other income (expense) in its consolidated statements of operations, a net foreign currency transaction gain of $0.4 million and $1.2 million for the years ended January 31, 2020 and 2018, respectively, and a net foreign currency transaction loss of $0.9 million for the year ended January 31, 2019.

Business Combinations

The Company accounts for business combinations by allocating the purchase price amongst the assets acquired, including identifiable intangible assets, and liabilities assumed based on the fair values of the acquired assets and assumed liabilities. The acquisition accounting is finalized during the measurement period, which may not exceed one year from the date of acquisition. During the measurement period the Company's accounting for the business combination transaction may be based on estimates due to various unknown factors present at the date of acquisition.

Fair Value Measurements

Fair value is defined as the price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants. Three levels of inputs may be used to measure fair value:

Level 1—Values derived from unadjusted quoted prices in active markets for identical assets and liabilities.

Level 2—Values derived from observable inputs other than quoted prices that are observable for the asset or liability, either directly or indirectly, including quoted prices for similar assets or liabilities in active markets, or quoted prices for identical or similar assets in markets that are not active.

Level 3—Values derived from unobservable inputs for which there is little or no market data available, thereby requiring the reporting entity to develop its own assumptions.

In instances where the determination of the fair value measurement is based on inputs from different levels of the fair value hierarchy, the level in the fair value hierarchy within which the entire fair value measurement falls is based on the lowest level input that is significant to the fair value measurement in its entirety.

Segment Reporting

The Company operates its business in three reportable segments, the Agriculture, Construction and International segments.

Recent Accounting Guidance

Accounting guidance adopted

In March 2016, the FASB amended authoritative guidance on stock-based compensation through the issuance of ASU 2016-09 which is codified in ASC 718, Compensation - Stock Compensation. The amended guidance changes the accounting for certain aspects of share-based payments, including the income tax consequences, forfeitures, classification of awards as either equity or liabilities, and classification on the statements of cash flows. The Company adopted this guidance on February

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

1, 2017. Under the new guidance, the Company elected to account for forfeitures of share based instruments as they occur, as compared to the previous guidance under which the Company estimated the number of forfeitures. The Company applied the accounting change on a modified retrospective basis as a cumulative-effect adjustment to retained earnings as of February 1, 2017. The following table summarizes the impact to the Company’s consolidated balance sheet:



	As of February 1, 2017
	Balance Sheet Classification
	Additional paid-in capital		Deferred income tax liability			Retained earnings
			(in thousands)
			Increase (Decrease)
Impact of cumulative-effect adjustment from adoption of ASU 2016-09	$	2,087	$	(835	)	$	(1,252	)

In February 2016, the Financial Accounting Standards Board ("FASB") issued a new leasing standard applicable for lessees and lessors and codified in Accounting Standards Codification 842, Leases, ("ASC 842") to increase transparency and comparability among organizations. Most prominent among the changes in the standard is the recognition on the balance sheet by a lessee of right-of-use assets and lease liabilities for most leases. The standard also requires new disclosures to help financial statement users better understand the amount, timing, and uncertainty of cash flows arising from lease activities. This guidance was effective for reporting periods beginning after December 15, 2018.

The Company adopted the leasing guidance on February 1, 2019 using a prospective transition method at the adoption date and recognized a cumulative-effect adjustment to the opening balance of retained earnings as a result of adoption. Under this method of adoption, prior period amounts are not adjusted and will continue to be reported under accounting standards in effect for those periods. The Company elected the package of practical expedients afforded under the guidance, which applies to leases that commenced prior to adoption and permits an entity not to: 1) reassess whether existing or expired contracts are or contain a lease, 2) reassess the lease classification, and 3) reassess any initial direct costs for any existing leases. The Company did not elect the use of the hindsight practical expedient to determine the lease term, but rather included the lease term as defined under former leasing guidance to capitalize the right-of-use asset and lease liability upon adoption. The Company identified new, and updated existing, internal controls and processes to ensure compliance with the new standard, but such modifications were not deemed to be material to our overall system of internal controls.

Adoption of the new standard for leasing transactions in which the Company is the lessee had a material impact on our consolidated balance sheet but did not have an impact on our consolidated statement of operations or cash flows. The most significant impact was the recognition of right-of-use assets and lease liabilities for operating leases, while the accounting for financing leases remained substantially unchanged. We recognized a cumulative-effect adjustment to retained earnings as of February 1, 2019 of $5.5 million primarily resulting from impairment of operating lease right-of-use assets present on the date of adoption, net of the deferred tax impact. The adoption of the new standard for leasing transactions in which the Company is the lessor did not impact our consolidated balance sheet, statement of operations or cash flows. The Company has included the additional disclosures required under ASC 842 in Note 16.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Adoption of ASC 842 impacted our consolidated balance sheet as of February 1, 2019 as follows:



	As Previously		Adoption Impact				As
	Reported		of ASC 842				Adjusted
	(in thousands)
			Increase/(Decrease)
Assets
Operating lease assets	$	—	$	100,469		(a)	$	100,469

Liabilities and Stockholders' Equity
Current maturities of long-term debt	3,340		(1,273		)	(b)	2,067
Current operating lease liabilities	—		12,266			(c)	12,266
Accrued expenses and other	35,091		972			(d)	36,063
Long-term debt, less current maturities	25,812		(5,136		)	(b)	20,676
Operating lease liabilities	—		98,250			(c)	98,250
Deferred income taxes	4,955		(374		)	(e)	4,581
Other long-term liabilities	5,908		1,228			(f)	7,136
Retained earnings	89,228		(5,464		)	(g)	83,764

(a) Capitalization of operating lease assets, net of straight-line rent accrued liabilities, cease-use liabilities, and right-of-use asset impairment present on the date of adoption.

(b) As described above under Reclassifications, concurrent with the adoption of ASC 842, the Company elected to reclassify current maturities of finance lease liabilities from Current maturities of long-term debt to Accrued expenses and other and the long-term portion of finance lease liabilities from Long-term debt, less current maturities to Other long-term liabilities in the accompanying consolidated balance sheet as of January 31, 2019 to maintain consistency and comparability between periods presented.

(d) As described in (b) above, includes the reclassification of current maturities of finance lease liabilities, net of the reclassification of the current portion of cease-use liabilities to Operating lease assets as part of the adoption of ASC 842.

(e) Deferred tax impact of adoption, primarily resulting from operating lease right-of-use asset impairment recognized upon adoption, net of the valuation allowance recognized for such deferred tax assets.

(f) As described in (b) above, includes the reclassification of finance lease liabilities, net of the ASC 842 adoption impact of reclassifying straight-line rent accrued liabilities and cease-use liabilities, and the cumulative-effect adjustment recognized in retained earnings for gains deferred on previous sale-leaseback transactions.

(g) Cumulative-effect adjustment of $6.6 million for operating lease right-of-use asset impairment present on the date of adoption net of the adjustment for deferred gains on previous sale-leaseback transactions of $0.7 million and the deferred tax impact of these adjustments, net of the valuation allowance recognized on such deferred tax assets.

Accounting guidance not yet adopted

In June 2016, the FASB issued a new standard, codified in ASC 326, that modifies how entities measure credit losses on most financial instruments. The new standard replaces the current "incurred loss" model with an "expected credit loss" model that requires consideration of a broader range of information to estimate expected credit losses over the lifetime of the asset. The new standard is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2019, and will be applied using a modified retrospective approach through a cumulative-effect adjustment to retained earnings as of the effective date to align our credit loss methodology with the new standard. We adopted this standard on February 1, 2020. While we are currently finalizing our evaluation of the impact to our consolidated financial statements of adopting this guidance, we do not anticipate that the guidance will materially impact our consolidated financial statements.

In February 2018, the FASB issued guidance on the accounting for implementation costs incurred in a cloud computing arrangement that is a service contract, codified in ASC 350-40. This guidance aligns the accounting for costs incurred to implement a cloud computing arrangement that is a service arrangement with the guidance on capitalizing costs associated with developing or obtaining internal-use software. This guidance is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2019, and may be applied using either a retrospective or prospective transition approach. We adopted this standard on February 1, 2020 and anticipate applying the prospective transition approach.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

While we are currently finalizing our evaluation of the impact of adopting this guidance, we anticipate that it will prospectively impact our consolidated financial statements as we expect to incur approximately $2.8 million of costs in fiscal 2021 related to our ERP conversion which will be capitalized, but would have been expensed as incurred under previous accounting guidance.

NOTE 2 - EARNINGS PER SHARE

Earnings (Loss) Per Share ("EPS")

The Company uses the two-class method to calculate basic and diluted EPS. Unvested restricted stock awards are considered participating securities because they entitle holders to non-forfeitable rights to dividends during the vesting term. Under the two-class method, earnings of the Company are allocated between common stockholders and these participating securities based on the weighted-average number of shares of common stock and participating securities outstanding during the relevant period.

Basic EPS is computed by dividing net income (loss) attributable to Titan Machinery Inc. common stockholders by the weighted-average number of shares of common stock outstanding during the relevant period. Diluted EPS is computed by dividing net income (loss) attributable to Titan Machinery Inc. common stockholders by the weighted-average number of shares of common stock outstanding after adjusting for potential dilution related to the conversion of all dilutive securities into common stock. All potentially dilutive securities were included in the computation of diluted EPS for years with net income. All anti-dilutive securities were excluded from the computation of diluted EPS.

The following table sets forth the calculation of basic and diluted EPS:



	Year Ended January 31,
	2020			2019			2018
	(in thousands, except per share data)
Numerator
Net income (loss)	$	13,953		$	12,182		$	(7,049	)
Allocation to participating securities	(221		)	(202		)	141
Net income (loss) attributable to Titan Machinery Inc. common stockholders	$	13,732		$	11,980		$	(6,908	)
Denominator
Basic weighted-average common shares outstanding	21,946			21,809			21,543
Plus: incremental shares from assumed vesting of restricted stock units	7			7			—
Diluted weighted-average common shares outstanding	21,953			21,816			21,543

Earnings (Loss) per Share:
Basic	$	0.63		$	0.55		$	(0.32	)
Diluted	$	0.63		$	0.55		$	(0.32	)

Anti-dilutive shares excluded from diluted weighted-average common shares outstanding:
Stock options and restricted stock units	—			—			95
Shares underlying senior convertible notes (conversion price of $43.17)	—			1,057			1,521

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 3 - REVENUE

The following tables present our revenue disaggregated by revenue source and segment for the years ended January 31, 2020 and 2019:



	Year Ended January 31, 2020
	Agriculture		Construction		International		Total
	(in thousands)
Equipment	$	535,792	$	194,675	$	186,735	$	917,202
Parts	141,093		52,160		40,964		234,217
Service	66,158		26,189		6,818		99,165
Other	2,989		2,895		264		6,148
Revenue from contracts with customers	746,032		275,919		234,781		1,256,732
Rental	3,010		44,115		1,314		48,439
Total revenues	$	749,042	$	320,034	$	236,095	$	1,305,171



	Year Ended January 31, 2019
	Agriculture		Construction		International		Total
	(in thousands)
Equipment	$	535,034	$	185,163	$	188,981	$	909,178
Parts	127,741		47,404		35,651		210,796
Service	58,823		23,267		4,750		86,840
Other	2,690		3,896		179		6,765
Revenue from contracts with customers	724,288		259,730		229,561		1,213,579
Rental	2,505		42,259		3,162		47,926
Total revenues	$	726,793	$	301,989	$	232,723	$	1,261,505

Deferred revenue from contracts with customers totaled $39.5 million and $44.9 million as of January 31, 2020 and January 31, 2019. Our deferred revenue most often increases in the fourth quarter of each fiscal year, due to a higher level of customer down payments or prepayments. In the fourth quarter of the fiscal year, longer time periods between customer payments and delivery of the equipment occur. The decrease in deferred revenue from January 31, 2019 to January 31, 2020 was primarily due to lower new equipment sales activity during the fourth quarter of fiscal 2020. During the year ended January 31, 2020, the Company recognized substantially all of the revenue that was included in the deferred revenue balance as of January 31, 2019.

No material amount of revenue was recognized during the year ended January 31, 2020 from performance obligations satisfied in previous periods. The Company has elected as a practical expedient to not disclose the value of unsatisfied performance obligations for (i) contracts with an original expected length of service of one year or less and (ii) contracts for which we recognize revenue at the amount to which we have the right to invoice for services performed. The contracts for which the practical expedient has been applied include (i) equipment revenue transactions, which do not have a stated contractual term, but are short-term in nature, and (ii) service revenue transactions, which also do not have a stated contractual term but are generally completed within 30 days and for such contracts we recognize revenue over time at the amount to which we have the right to invoice for services completed to date.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 4 - RECEIVABLES



	January 31, 2020			January 31, 2019
	(in thousands)
Trade and unbilled receivables from contracts with customers
Trade receivables due from customers	$	36,400		$	38,827
Trade receivables due from finance companies	12,352			10,265
Unbilled receivables	13,944			11,222
Trade and unbilled receivables from rental contracts
Trade receivables	7,381			6,386
Unbilled receivables	861			828
Other receivables
Due from manufacturers	5,763			12,950
Other	1,198			550
Total receivables	77,899			81,028
Less allowance for doubtful accounts	(5,123		)	(3,528		)
Receivables, net of allowance for doubtful accounts	$	72,776		$	77,500

The following table presents impairment losses on receivables arising from sales contracts with customers and receivables arising from rental contracts:



	Year Ended January 31, 2020		Year Ended January 31, 2019
	(in thousands)
Impairment losses on:
Receivables from sales contracts	$	1,373	$	492
Receivables from rental contracts	1,124		343
	$	2,497	$	835

NOTE 5 - INVENTORIES



	January 31, 2020		January 31, 2019
	(in thousands)
New equipment	$	358,339	$	258,081
Used equipment	157,535		158,951
Parts and attachments	79,813		72,760
Work in process	1,707		1,299
	$	597,394	$	491,091

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 6 - PROPERTY AND EQUIPMENT



	January 31, 2020			January 31, 2019
	(in thousands)
Rental fleet equipment	$	104,133		$	111,164
Machinery and equipment	22,682			21,646
Vehicles	51,850			42,330
Furniture and fixtures	41,720			40,645
Land, buildings, and leasehold improvements	70,408			63,091
	290,793			278,876
Less accumulated depreciation	(145,231		)	(139,926		)
	$	145,562		$	138,950

Depreciation expense totaled $26.5 million, $23.6 million and $25.0 million for the years ended January 31, 2020, 2019 and 2018, respectively. The Company had assets related to sale-leaseback financing obligations and capital leases associated with real estate of store locations, which are included in the land, buildings and leasehold improvements balance above. Such assets had gross carrying values totaling $24.3 million and $25.2 million, and accumulated amortization balances totaling $6.9 million and $5.8 million, as of January 31, 2020 and 2019.

In March 2019, the Company completed an assessment of its Enterprise Resource Planning ("ERP") application and concluded that the Company would begin the process to prepare for conversion to a new ERP application. The initial anticipated start date for the new ERP application was the first-half of the fiscal year ending January 31, 2021, which has been postponed to the first-half of the fiscal year ending January 31, 2022. The Company has prospectively adjusted the useful life of its current ERP application such that it will be fully amortized upon its estimated replacement date. The net book value of the ERP asset of $8.7 million, as of March 2019, is being amortized on a straight-line basis over the estimated remaining period of use. For the year ended January 31, 2020, the Company recognized an additional $4.7 million of amortization expense, which decreased operating income accordingly and decreased net income by approximately $3.6 million.

NOTE 7 - INTANGIBLE ASSETS AND GOODWILL

Definite-Lived Intangible Assets

The following is a summary of definite-lived intangible assets as of January 31, 2020 and 2019:



	January 31, 2020							January 31, 2019
	Cost		Accumulated Amortization			Net		Cost		Accumulated Amortization			Net
	(in thousands)							(in thousands)
Covenants not to compete	$	100	$	(7	)	$	93	$	200	$	(138	)	$	62
Customer relationships	345		(83		)	262		112		(19		)	93
	$	445	$	(90	)	$	355	$	312	$	(157	)	$	155

Intangible asset amortization expense was $0.1 million for each of the three years ended January 31, 2020, 2019 and 2018. The increase in net, definite-lived intangible assets for fiscal 2020, as compared to fiscal 2019, was primarily the result of the Northwood acquisition, offset by impairments. As of January 31, 2020, future amortization expense is expected to be as

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

follows:



Fiscal years ending January 31,	Amount
	(in thousands)
2021	$	110
2022	91
2023	58
2024	58
2025	38
Thereafter	—
	$	355

Indefinite-Lived Intangible Assets

The Company's indefinite-lived intangible assets consist of distribution rights assets. The following is a summary of distribution rights assets by segment as of January 31, 2020 and 2019:



	January 31,
	2020		2019
	(in thousands)
Segment
Agriculture	$	6,070	$	5,050
Construction	72		237
International	1,870		1,805
	$	8,012	$	7,092

The results of the Company's annual distribution rights impairment test for the year ended January 31, 2020 indicated impairment of $0.7 million, which was appropriately recorded in fiscal 2020. In the prior years ended January 31, 2019 and 2018, the annual distribution rights impairment tests indicated no impairment.

Goodwill

Changes in the carrying amount of goodwill during the years ended January 31, 2020, 2019 and 2018 are as follows:



	Agriculture		Construction		International			Total
	(in thousands)
Balance, January 31, 2018	$	250	$	—	$	—		$	250
Arising from business combinations	—		—		924			924
Foreign currency translation	—		—		(13		)	(13		)
Balance, January 31, 2019	250		—		911			1,161
Arising from business combinations	699		—		499			1,198
Foreign currency translation	—		—		(32		)	(33		)
Balance, January 31, 2020	$	949	$	—	$	1,378		$	2,327

The results of the Company's annual goodwill impairment tests for the fiscal years ended January 31, 2020 and 2019 indicated that no goodwill impairment existed as of the test date.

NOTE 8 - FLOORPLAN PAYABLE/LINES OF CREDIT

Floorplan payable balances reflect amounts owed to manufacturers for equipment inventory purchases and amounts outstanding under our various floorplan line of credit facilities. In the consolidated statements of cash flows, the Company

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

reports cash flows associated with manufacturer floorplan financing as operating cash flows and cash flows associated with non-manufacturer floorplan financing as financing cash flows.

As of January 31, 2020, the Company had floorplan lines of credit totaling $717.0 million, which is primarily comprised of three significant floorplan lines of credit: (i) a $450.0 million credit facility with CNH Industrial, (ii) a $140.0 million line of credit with a group of banks led by Wells Fargo Bank, National Association (“Wells Fargo”), and (iii) a $60.0 million credit facility with DLL Finance LLC (“DLL Finance”).

CNH Industrial Floorplan Payable Line of Credit

As of January 31, 2020, the Company had a $450.0 million credit facility with CNH Industrial, of which $360.0 million is available for domestic financing and $90.0 million is available for European financing.

The domestic financing facility offers financing for new and used equipment inventories. Available borrowings under the credit facility are reduced by outstanding floorplan payable balances and other acquisition-related financing arrangements with CNH Industrial. The credit facility charges interest at a rate equal to the prime rate plus 3.25% for the financing of new and used equipment inventories and rental fleet assets. CNH Industrial offers periods of reduced interest rates and interest-free periods. Repayment terms vary, but generally payments are made from sales proceeds or rental revenue generated from the related inventories or rental fleet assets. Balances under the outstanding with CNH Industrial credit facility are secured by the inventory or rental fleet purchased with the floorplan proceeds. The European financing facility offers financing for new equipment inventories. Available borrowings under the credit facility are reduced by outstanding floorplan payable balances. Amounts outstanding are generally due approximately 75 days after the date of invoice by CNH Industrial. Generally, no interest is charged on outstanding balances. Amounts outstanding are secured by the inventory purchased with the floorplan proceeds.

The CNH Industrial credit facility contains financial covenants that impose a maximum level of adjusted debt to tangible net worth of 3.50:1.00 and minimum fixed charge coverage ratio of 1.10:1.00. It also contains various restrictive covenants that require prior consent of CNH Industrial if the Company desires to engage in any acquisition of, consolidation or merger with, any other business entity in which the Company is not the surviving company; create subsidiaries; move any collateral outside of the U.S.; or sell, rent, lease or otherwise dispose or transfer any of the collateral, other than in the ordinary course of business. CNH Industrial’s consent is also required for the acquisition of any CNH Industrial dealership. In addition, the CNH Industrial credit facility restricts the Company's ability to incur any liens upon any substantial part of the assets. The credit facility automatically renews on August 31st of each year unless earlier terminated by either party. As of January 31, 2020, the Company was in compliance with the adjusted debt to tangible net worth and fixed charge coverage ratio financial covenants under this credit facility.

During the year ended January 31, 2020, the CNH Industrial credit facility was amended to increase the available borrowings under the credit facility, from a combined capacity of $400.0 million to the current combined capacity of $450.0 million.

Wells Fargo Credit Agreement - Floorplan Payable and Working Capital Lines of Credit

As of January 31, 2020, the Company had a second amended and restated credit agreement with Wells Fargo (the "Wells Fargo Credit Agreement"), which provides for a $140.0 million wholesale floorplan line of credit (the "Floorplan Payable Line") and a $60.0 million working capital line of credit (the "Working Capital Line"). The amount available for borrowing under the Floorplan Payable Line is reduced by amounts outstanding thereunder, borrowing base calculations and outstanding standby letters of credit. The Wells Fargo Credit Agreement has a variable interest rate on outstanding balances and has a 0.25% to 0.375% non-usage fee on the average monthly unused amount and requires monthly payments of accrued interest. The Company elects at the time of any advance to choose a Base Rate Loan or a LIBOR Rate Loan. The LIBOR Rate is for the duration of one-month, two-month, or three-month LIBOR rate at the time of the loan, as chosen by the Company. The Base Rate is the greatest of (a) the Federal Funds Rate plus 0.5%, (b) the one-month LIBOR Rate plus 1%, and (c) the prime rate of interest announced, from time to time, within Wells Fargo. The applicable margin rate is determined based on excess availability under the Wells Fargo Credit Agreement and ranges from 0.75% to 1.5% for Base Rate Loans and 1.75% to 2.50% for LIBOR Rate Loans.

The Wells Fargo Credit Agreement is secured by substantially all our assets and requires the Company to maintain a fixed charge coverage ratio of at least 1.10:1.00 if adjusted excess availability plus eligible cash collateral is less than 15% of the total amount of the credit facility. Based on our adjusted excess availability and cash collateral, we were not subject to the fixed charge coverage ratio as of January 31, 2020. The Wells Fargo Credit Agreement also includes various non-financial

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

covenants, including, under certain conditions, restricting the Company’s ability to make certain cash payments, including for cash dividends and stock repurchases, restricting the Company’s ability to issue equity instruments, restricting the Company’s ability to complete acquisitions or divestitures, and limiting the Company's ability to incur new indebtedness. The provisions in the Wells Fargo Credit Agreement restricting the Company from making certain cash payments, including for cash dividends and stock repurchases, provide that no such payments may be made unless, (i) as of the date of such payment there is no default or event of default occurring and continuing, (ii) the amount remaining available to be borrowed by the Company under the Wells Fargo Credit Agreement is greater than twenty percent of the total borrowing capacity under the Wells Fargo Credit Agreement and (iii) the Company's fixed charge coverage ratio for the 12 month period most recently ended, on a pro-forma basis assuming that such proposed cash payment has been made, is at least 1.10 to 1.00. As of January 31, 2020, under these provisions of the Wells Fargo Credit Agreement, the Company had an unrestricted dividend availability of approximately $31.2 million.

The maturity date of the Wells Fargo Credit Agreement was contingent upon the results of a maturity test that was performed on February 1, 2019, a date that was three months prior to the scheduled maturity date of the Company's outstanding Senior Convertible Notes. Pursuant to this test, the maturity date for the Wells Fargo Credit Agreement would be October 28, 2020 so long as (i) the Company's fixed charge coverage ratio for the 12 month period ended December 31, 2018 was at least 1.10 to 1.00 and (ii) a liquidity test, requiring that the Company have unrestricted cash on hand plus excess borrowing availability under the Wells Fargo Credit Agreement (on a pro-forma basis reflecting the Company’s repayment in full of its outstanding Senior Convertible Notes) in an amount that is greater than 20% of maximum credit amount under the facility, was met on February 1, 2019. If both financial tests were not satisfied on February 1, 2019, the Wells Fargo Credit Agreement would immediately mature and all amounts outstanding would become immediately due and payable in full. The Company satisfied the maturity test requirements on February 1, 2019, and therefore the maturity date of the Wells Fargo Credit Agreement is October 28, 2020.

The Floorplan Payable Line is used to finance equipment inventory purchases. Amounts outstanding are recorded as floorplan payable, within current liabilities on the consolidated balance sheets, as the Company intends to repay amounts borrowed within one year.

The Working Capital Line is used to finance rental fleet equipment and for general working capital requirements of the Company. At the end of fiscal 2020, the amount outstanding on the Working Capital Line is recorded as current maturities of long-term debt and within current liabilities on the consolidated balance sheets, because the Wells Fargo Credit Agreement is due to mature on October 28, 2020. The balances outstanding on the Working Capital Line as of January 31, 2020 and 2019 are disclosed in Note 12.

DLL Finance Floorplan Payable Line of Credit

As of January 31, 2020, the Company had a $60.0 million credit facility with DLL Finance, of which $46.5 million is available for domestic financing and $13.5 million is available for financing in certain of our European markets. The DLL Finance credit facility may be used to purchase or refinance new and used equipment inventory. Amounts outstanding for domestic financing bear interest on outstanding balances of three-month LIBOR plus an applicable margin of 2.85%. Amounts outstanding for European financing bear interest on outstanding balances of three-month EURIBOR plus an applicable margin of 2.10% to 2.50%. The credit facility allows for increase, decrease or termination of the facility by DLL Finance upon 90 days notice. The credit facility contains financial covenants that impose a maximum net leverage ratio of 3.50:1.00 and a minimum fixed charge coverage ratio of 1.10:1.00. The credit facility also requires the Company to obtain prior consent from DLL Finance if the Company desired to engage in any acquisition meeting certain financial thresholds. The balances outstanding with DLL Finance are secured by the inventory or rental fleet purchased with the floorplan proceeds. Repayment terms vary by individual notes, but generally payments are made from sales proceeds or rental revenue from the related inventories or rental fleet assets. As of January 31, 2020, the Company was in compliance with the net leverage ratio and fixed charge coverage ratio financial covenants under this credit facility.

During the year ended January 31, 2020, the DLL Finance credit facility was amended to, among other things, increase the available borrowing capacity from $45.0 million to the current level of $60.0 million.

Other Lines of Credit

The Company’s other lines of credit include various floorplan and working capital lines of credit primarily offered by non-manufacturer financing entities. Interest charged on outstanding borrowings are generally variable rates of interest most often based on LIBOR or EURIBOR and include interest margins primarily ranging from 1.50% to 6.00%. Outstanding balances are generally secured by inventory and other current assets. In most cases these lines of credit have a one-year

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

maturity, with an annual review process to extend the maturity date for an additional one-year period. As of January 31, 2020, the Company had a compensating balance arrangement under one of its European floorplan credit facilities which requires a minimum cash deposit to be maintained with the lender in the amount of $5.0 million for the term of the credit facility.

Summary of Outstanding Amounts

As of January 31, 2020 and 2019, the Company’s outstanding balance of floorplan payables and lines of credit consisted of the following:



	January 31, 2020		January 31, 2019
	(in thousands)
CNH Industrial	$	187,690	$	120,319
Wells Fargo Floorplan Payable Line	82,700		49,100
DLL Finance	30,657		13,432
Other outstanding balances with manufacturers and non-manufacturers	70,725		90,905
	$	371,772	$	273,756

As of January 31, 2020, the interest-bearing U.S floorplan payables carried various interest rates ranging from 4.05% to 4.81%, compared to a range of 4.77% and 6.30% as of January 31, 2019. As of January 31, 2020, foreign floorplan payables carried various interest rates primarily ranging from 0.86% to 7.66%, compared to a range of 0.94% to 8.51% as of January 31, 2019. As of January 31, 2020 and 2019, $205.2 million and $151.7 million of outstanding floorplan payables were non-interest bearing.

NOTE 9 - DEFERRED REVENUE



	January 31, 2020		January 31, 2019
	(in thousands)
Deferred revenue from contracts with customers	$	39,512	$	44,893
Deferred revenue from rental and other contracts	1,456		1,516
	$	40,968	$	46,409

NOTE 10 - ACCRUED EXPENSES & OTHER



	January 31, 2020		January 31, 2019
	(in thousands)
Compensation	$	19,732	$	19,661
Sales, payroll, real estate and value added taxes	5,947		4,698
Insurance	3,336		2,083
Lease residual value guarantees	2,054		2,089
Finance lease liabilities	1,708		—
Interest	608		905
Income taxes payable	49		1,574
Other	4,975		4,081
	$	38,409	$	35,091

NOTE 11 - SENIOR CONVERTIBLE NOTES

On April 24, 2012, the Company issued through a private offering $150 million of 3.75% Senior Convertible Notes (the "Senior Convertible Notes"). The Senior Convertible Notes bore interest at a rate of 3.75% per year, payable semi-annually

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

in arrears on May 1 and November 1 of each year. The Senior Convertible Notes matured on May 1, 2019, and the Company repaid the outstanding principal balance of $45.6 million on the maturity date.

In accounting for the Senior Convertible Notes, the Company segregated the liability component of the instrument from the equity component. The liability component was measured by estimating the fair value of a non-convertible debt instrument that was similar in its terms to the Senior Convertible Notes. The excess of the aggregate face value of the Senior Convertible Notes over the estimated fair value of the liability component was recognized as a debt discount that was amortized over the expected life of the Senior Convertible Notes using the effective interest rate method. Amortization of the debt discount was recognized as non-cash interest expense. The equity component of the Senior Convertible Notes was measured as the residual difference between the aggregate face value of the Senior Convertible Notes and the estimated aggregate fair value of the liability component. Transaction costs incurred in connection with the issuance of the Senior Convertible Notes were allocated to the liability and equity components based on their relative values. Transaction costs allocated to the liability component were amortized using the effective interest rate method and recognized as non-cash interest expense. Transaction costs allocated to the equity component reduced the value of the equity component recognized in stockholders' equity.

As of January 31, 2019, the Senior Convertible Notes consisted of the following:



	January 31, 2019

Principal value	$	45,644
Unamortized debt discount	(350		)
Unamortized debt issuance costs	(45		)
Carrying value of senior convertible notes	$	45,249

Carrying value of equity component, net of deferred taxes	$	14,923

Conversion rate (shares of common stock per $1,000 principal amount of notes)	23.1626
Conversion price (per share of common stock)	$	43.17

During fiscal 2020, the Company repaid the remaining $45.6 million face value ($45.6 million carrying value) of Senior Convertible Notes with $45.6 million in cash on the maturity date of May 1, 2019. During fiscal 2019, the Company repurchased an aggregate of $20.0 million face value ($19.4 million carrying value) of its Senior Convertible Notes with $20.0 million in cash. All consideration was attributed to the extinguishment of the liability and the Company recognized a pre-tax loss of $0.6 million on the repurchase. During fiscal 2018, the Company repurchased an aggregate of $30.1 million face value ($28.1 million carrying value) of its Senior Convertible Notes with $29.1 million in cash. Of the $29.1 million in total cash consideration, $28.1 million was attributed to the extinguishment of the liability and $1.0 million was attributed to the reacquisition of a portion of the equity component of the instrument. The Company recognized an immaterial net pre-tax gain on the extinguishment of the liability and recognized a $0.6 million after-tax reduction in additional paid-in capital from the reacquisition of the equity component. Gains and losses on repurchases are included in other interest expense in the Consolidated Statements of Operations.

The Company recognized interest expense associated with its Senior Convertible Notes as follows:



	Year Ended January 31,
	2020		2019		2018
	(in thousands)
Cash Interest Expense
Coupon interest expense	$	421	$	2,014	$	2,782
Noncash Interest Expense
Amortization of debt discount	350		1,626		2,104
Amortization of transaction costs	45		216		290
	$	816	$	3,856	$	5,176

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

The effective interest rate of the liability component was equal to 7.3% for each of the statements of operations periods presented.

NOTE 12 - LONG-TERM DEBT

The following is a summary of long-term debt as of January 31, 2020 and 2019:



	January 31, 2020			January 31, 2019
	(in thousands)
Sale-leaseback financing obligations, interest rates ranging from 3.4% to 10.3% with various maturity dates through December 2030	$	17,781		$	19,010
Wells Fargo Credit Agreement - Working Capital Line, interest accrues at a variable rate, ranging from 3.9% to 4.7%, on outstanding balances, requires monthly payments of accrued interest, matures on October 28, 2020	10,000			—
Real estate mortgage bearing interest at 5.11%, payable in annual installments of $0.3 million, maturing on May 15, 2039, secured by real estate assets	6,827			—
Real estate mortgage bearing interest at 4.62%, payment in monthly installments of $0.04 million with a final payment at maturity of $3.4 million, maturing on June 10, 2024, secured by real estate assets	4,416			—
Real estate mortgage bearing interest at 4.40%, payment in monthly installments of $0.01 million with a final payment at maturity of $1.0 million, maturing on January 1, 2027, secured by real estate assets	1,489			—
Equipment financing loan, payable in monthly installments over a 72-month term for each funded tranche, bearing interest at 3.89%, secured by vehicle assets	7,468			—
Real estate mortgage bearing interest at 2.09%, payable in monthly installments, maturing on June 30, 2026, secured by real estate assets	2,520			2,978
Other long-term debt primarily bearing interest at three-month EURIBOR plus 2.6%, payable in quarterly installments, maturing on January 31, 2021	1,067			755
	51,568			22,743
Less current maturities	(13,779		)	(2,067		)
	$	37,789		$	20,676

Long-term debt maturities are as follows:



Years Ending January 31,	Amounts
	(in thousands)
2021	$	13,779
2022	3,695
2023	3,781
2024	3,946
2025	7,398
Thereafter	18,969
	$	51,568

NOTE 13 - RESTRUCTURING COSTS

In February 2017, to better align the Company's cost structure and business in certain markets, the Company announced a dealership restructuring plan (the "Fiscal 2018 Restructuring Plan"), which resulted in the closure of one Construction location and 14 Agriculture locations. The Fiscal 2018 Restructuring Plan resulted in a reduction of expenses while allowing the Company to continue to provide a leading level of service to its customers. In total, over the term of the Fiscal 2018 Restructuring Plan, the Company recognized $13.9 million of restructuring charges consisting primarily of lease termination costs, termination benefits and fixed asset impairment charges. Such costs are included in the restructuring costs line in the consolidated statements of operations. As of January 31, 2018, the Company had closed and fully exited all of these locations and had completed its Fiscal 2018 Restructuring Plan. For fiscal year ended January 31, 2020, there were no costs

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

incurred related to the Fiscal 2018 Restructuring Plan.

Restructuring costs (credits) associated with the Company's Fiscal 2018 Restructuring Plan are summarized in the following table:



			Year Ended January 31,
	Cumulative Amount		2019		2018
	(in thousands)
Lease accrual and termination costs	$	6,095	$	414	$	5,681
Termination benefits	5,053		—		5,053
Impairment of fixed assets, net of gains on asset disposition	2,206		—		(751		)
Asset relocation and other costs	516		—		516
	$	13,870	$	414	$	10,499

Restructuring charges (credits) are summarized by segment in the following table:



	Year Ended January 31,
	2019			2018
	(in thousands)
Segment
Agriculture	$	441		$	6,886
Construction	(27		)	2,093
International	—			62
Shared Resources	—			1,458
Total	$	414		$	10,499

A reconciliation of the beginning and ending exit cost liability balance associated with our Fiscal 2018 Restructuring Plan is as follows:



	Lease Accrual & Termination Costs			Termination Benefits			Total
	(in thousands)
Balance, January 31, 2018	$	5,393		$	404		$	5,797
Exit costs incurred and charged to expense	414			—			414
Exit costs paid	(3,428		)	(404		)	(3,832		)
Balance, January 31, 2019	2,379			—			2,379
Reclassified as a reduction of right-of-use lease assets upon adopting ASC 842, Leases	(2,379		)	—			(2,379		)
Balance, January 31, 2020	$	—		—			$	—

As of January 31, 2019, $2.2 million of the exit cost liability was included in other long-term liabilities and $0.2 million was included in accrued expenses and other in the consolidated balance sheets.

During the year ended January 31, 2019, the Company paid $3.0 million to terminate the real estate lease agreement for one of the Company's previously closed stores. The termination payment approximated the recorded lease accrual liability and therefore the impact to the consolidated statement of operations was not material.

NOTE 14 - DERIVATIVE INSTRUMENTS

The Company holds derivative instruments for the purpose of minimizing exposure to fluctuations in foreign currency exchange rates and benchmark interest rates to which the Company is exposed in the normal course of its operations.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Cash Flow Hedge

The Company previously was party to an interest rate swap instrument which had a notional amount of $100.0 million, an effective date of September 30, 2014 and a maturity date of September 30, 2018. The objective of the instrument was to protect the Company from changes in benchmark interest rates to which the Company is exposed through certain of its variable interest rate credit facilities. The instrument provided for a fixed interest rate of 1.901% through the instrument's maturity date. The interest rate swap instrument was designated as a cash flow hedging instrument and accordingly changes in the effective portion of the fair value of the instrument had been recorded in other comprehensive income and only reclassified into earnings in the period(s) in which the related hedged item affects earnings or the anticipated underlying hedged transactions were no longer probable of occurring. In April 2017, the Company elected to terminate its outstanding interest rate swap instrument. The Company paid $0.9 million to terminate the instrument. This cash payment is presented as a financing cash outflow in the consolidated statements of cash flows.

Derivative Instruments Not Designated as Hedging Instruments

The Company periodically uses foreign currency forward contracts to hedge the effects of fluctuations in exchange rates on outstanding intercompany loans. The Company does not formally designate and document such derivative instruments as hedging instruments; however, the instruments are an effective economic hedge of the underlying foreign currency exposure. Both the gain or loss on the derivative instrument and the offsetting gain or loss on the underlying intercompany loan are recognized in earnings immediately, thereby eliminating or reducing the impact of foreign currency exchange rate fluctuations on net income. The Company's foreign currency forward contracts generally have three-month maturities, maturing on the last day of each fiscal quarter. The notional value of outstanding foreign currency contracts as of January 31, 2019 was $14.1 million. There were no outstanding foreign currency contracts as of January 31, 2020.

As of January 31, 2020, the Company had no derivative instruments and as of January 31, 2019 the fair value of the Company's outstanding derivative instruments was not material. Derivative instruments recognized as assets are recorded in prepaid expenses and other in the consolidated balance sheets, and derivative instruments recognized as liabilities are recorded in accrued expenses and other in the consolidated balance sheets.

The following table sets forth the gains and losses recognized in other comprehensive income (loss) ("OCI") and income (loss) related to the Company’s derivative instruments for the years ended January 31, 2020, 2019 and 2018. All amounts included in income (loss) in the table below from derivatives designated as hedging instruments relate to reclassifications from accumulated other comprehensive income.



	Year Ended January 31,
	2020				2019				2018
	OCI		Income		OCI		Income		OCI		Income
	(in thousands)				(in thousands)				(in thousands)
Derivatives Designated as Hedging Instruments:
Cash flow hedges:
Interest rate swap (a)	$	—	$	—	$	—	$	—	$	48	$	(1,091	)
Derivatives Not Designated as Hedging Instruments:
Foreign currency contracts (b)	—		365		—		1,696		—		(1,510		)
Total Derivatives	$	—	$	365	$	—	$	1,696	$	48	$	(2,601	)

(a) No material hedge ineffectiveness has been recognized. The amounts show in income (loss) above are reclassification amounts from accumulated other comprehensive income (loss) and are recorded in Floorplan interest expense in the consolidated statements of operations

(b) Amounts are included in Interest income and other income (expense) in the consolidated statements of operations

During the year ended January 31, 2018, the Company reclassified $0.6 million of pre-tax accumulated losses on its interest rate swap instrument from accumulated other comprehensive income (loss) to income as the original forecasted interest payments, which served as the hedged item underlying the interest rate swap instrument, were no longer probable of occurring during the time period over which such transactions were previously anticipated to occur. As of January 31, 2018, the Company had no remaining pre-tax net unrealized losses associated with its interest rate swap cash flow hedging instrument.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 15 - CONTINGENCIES AND GUARANTEES

Guarantees

The Company has provided residual value guarantees to CNH Industrial Capital in connection with certain customer leasing arrangements with CNH Industrial Capital. The Company, as guarantor, may be required to provide payment to CNH Industrial Capital at the termination of the lease agreement if the customer fails to exercise the purchase option under the leasing agreement and the proceeds CNH Industrial Capital receives upon disposition of the leased asset are less than the purchase option price as stipulated in the lease agreement. As of January 31, 2020, the maximum amount of residual value guarantees was approximately $3.4 million and the lease agreements have termination dates ranging from 2020 to 2025. As of January 31, 2020, the Company has recognized a liability of approximately $3.2 million based on its estimates of the likelihood and amount of residual value guarantees that will become payable at the termination dates of the underlying leasing agreements discounted at a rate of interest to reflect the risk inherent in the liability. As of January 31, 2020, the Company has recorded a current liability, recognized in accrued expenses and other in the consolidated balance sheets, of $2.1 million, and a long-term liability, recognized in other long-term liabilities in the consolidated balance sheets, of $1.1 million.

As of January 31, 2020, the Company had $1.6 million of guarantees on customer financing with CNH Industrial Capital. In the event that the customer defaulted on the payments owed to CNH Industrial Capital, the Company as the guarantor would be required to make those payments and any accelerated indebtedness to CNH Industrial Capital. Upon such payment, the Company would be entitled to enforce normal creditor rights against the customer including collection action for monetary damages or re-possession of the collateral if CNH Industrial Capital has a perfected security interest. No liabilities associated with these guarantees are included in the consolidated balance sheets as of January 31, 2020 as the Company deems the probability of being required to make such payments to be remote.

Litigation

On October 11, 2017, the Romania Competition Council (“RCC”) initiated an administrative investigation of the Romanian Association of Manufacturers and Importers of Agricultural Machinery (“APIMAR”) and all its members, including Titan Machinery Romania. The RCC's investigation involves whether the APIMAR members engaged in anti-competitive practices in their sales of agricultural machinery not involving European Union ("EU") subvention funding programs, by referring to the published sales prices governing EU subvention funded transactions, which prices are mandatorily disclosed to and published by AFIR, a Romanian government agency that oversees the EU subvention funding programs in Romania. The investigation is in a preliminary stage and the Company is currently unable to predict its outcome or reasonably estimate any potential loss that may result from the investigation.

The Company is engaged in proceedings incidental to the normal course of business. Due to their nature, such legal proceedings involve inherent uncertainties, including but not limited to, court rulings, negotiations between affected parties and governmental intervention. Based upon the information available to the Company and discussions with legal counsel, it is the Company's opinion that the outcome of the various legal actions and claims that are incidental to its business will not have a material impact on the financial position, results of operations or cash flows. Such matters, however, are subject to many uncertainties, and the outcome of any matter is not predictable with assurance.

Insurance

The Company has insurance policies with varying deductibility levels for property and casualty losses and is insured for losses in excess of these deductibles on a per claim and aggregate basis. The Company is primarily self-insured for health care claims for eligible participating employees. The Company has stop-loss coverage to limit its exposure to significant claims on a per claim and annual aggregate basis. The Company determines its liabilities for claims, including incurred but not reported losses, based on all relevant information, including actuarial estimates of claim liabilities.

Other Matters

The Company is the lessee under many real estate leases, in which it agrees to indemnify the lessor from certain liabilities arising as a result of the use of the leased premises, including environmental liabilities, or a breach of the lease by the lessee. Additionally, from time to time, the Company enters into agreements with third parties in connection with the sale of assets in which it agrees to indemnify the purchaser from certain liabilities or costs arising in connection with the assets. Also, in the ordinary course of business in connection with purchases or sales of goods and services, the Company enters into agreements that may contain indemnification provisions. In the event that an indemnification claim is asserted, the Company's liability would be limited by the terms of the applicable agreement. See additional information on operating lease commitments in Note 16.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 16 - LEASES

As Lessee

The Company, as lessee, leases certain of its dealership locations, office space, equipment and vehicles under operating and financing classified leasing arrangements. The Company has elected to not record leases with a lease term at commencement of 12 months or less on the consolidated balance sheet; such leases are expensed on a straight-line basis over the lease term. Many real estate lease agreements require the Company to pay the real estate taxes on the properties during the lease term and require that the Company maintains property insurance on each of the leased premises. Such payments are deemed to be variable lease payments, as the amounts may change during the term of the lease. Certain leases include renewal options that can extend the lease term for periods of one to ten years. Most real estate leases grant the Company a right of first refusal or other options to purchase the real estate, generally at fair market value, either during the lease term or at its conclusion. In most cases, the Company has not included these renewal and purchase options within the measurement of the right-of-use asset and lease liability. Most often the Company cannot readily determine the interest rate implicit in the lease and thus applies its incremental borrowing rate to capitalize the right-of-use asset and lease liability. We estimate our incremental borrowing rate by incorporating considerations of lease term, asset class and lease currency and geographical market. Our lease agreements do not contain any material non-lease components, residual value guarantees or material restrictive covenants.

The Company subleases a small number of real estate assets to third-parties, primarily dealership locations for which we have ceased operations. All sublease arrangements are classified as operating leases.

The components of lease expense were as follows:



	Classification	Twelve Months Ended January 31, 2020
		(in thousands)
Finance lease cost:
Amortization of leased assets	Operating expenses	$	1,457
Interest on lease liabilities	Other interest expense	554
Operating lease cost	Operating expenses & rental and other cost of revenue	21,225
Short-term lease cost	Operating expenses	242
Variable lease cost	Operating expenses	2,665
Sublease income	Interest income and other income (expense)	(620		)
		$	25,523

Right-of-use lease assets and lease liabilities consist of the following:



	Classification	January 31, 2020
		(in thousands)
Assets
Operating lease assets	Operating lease assets	$	88,281
Financing lease assets^(a)	Property and equipment, net of accumulated depreciation	6,297
Total leases assets		$	94,578
Liabilities
Current
Operating	Current operating lease liabilities	$	12,259
Financing	Accrued expenses and other	1,708
Noncurrent
Operating	Operating lease liabilities	88,387
Financing	Other long-term liabilities	4,103
Total lease liabilities		$	106,457

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

^(a)Finance lease assets are recorded net of accumulated amortization of $1.5 million as of January 31, 2020.

Maturities of lease liabilities as of January 31, 2020 are as follows:



	Operating		Finance
	Leases		Leases		Total
Fiscal Year Ending January 31,	(in thousands)
2021	$	18,714	$	2,157	$	20,871
2022	16,841		1,838		18,679
2023	15,737		1,188		16,925
2024	14,830		448		15,278
2025	13,700		387		14,087
2026	14,013		309		14,322
Thereafter	33,163		1,083		34,246
Total lease payments	126,998		7,410		134,408
Less: Interest	26,352		1,599		27,951
Present value of lease liabilities	$	100,646	$	5,811	$	106,457

The weighted-average lease term and discount rate as of January 31, 2020 are as follows:



Weighted-average remaining lease term (years):
Operating leases		7.9
Financing leases		5.4
Weighted-average discount rate:
Operating leases		6.1%
Financing leases		8.5%

Other lease information is as follows:



	Twelve Months Ended January 31, 2020
	(in thousands)
Cash paid for amounts included in the measurement of lease liabilities
Operating cash flows from operating leases	$	18,176
Operating cash flow from finance leases	553
Financing cash flows from finance leases	1,812
Operating lease assets obtained in exchange for new operating lease liabilities	1,316
Finance lease assets obtained in exchange for new finance lease liabilities	1,333

As Lessor

The Company rents equipment to customers, primarily in the Construction segment, on a short-term basis. Our rental arrangements generally do not include minimum, noncancellable periods as the lessee is entitled to cancel the arrangement at any time. Most often, our rental arrangements extend for periods ranging from a few days to a few months. We maintain a fleet of dedicated rental assets within our Construction segment and, within all segments, may also provide short-term rentals of certain equipment inventory assets. Certain rental arrangements may include rent-to-purchase options whereby customers are given a period of time to exercise an option to purchase the related equipment at an established price with any rental payments paid applied to reduce the purchase price.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

All of the Company's leasing arrangements as lessor are classified as operating leases. Rental revenue is recognized on a straight-line basis over the rental period. Rental revenue includes amounts charged for loss and damage insurance on rented equipment. In most cases, our rental arrangements include non-lease components, including delivery and pick-up services. The Company accounts for these non-lease components separate from the rental arrangement and recognizes the revenue associated with these components when the service is performed. The Company has elected to exclude from rental revenue all sales, value added and other taxes collected from our customers concurrent with our rental activities. Rental billings most often occur on a monthly basis and may be billed in advance or in arrears, thus creating unbilled rental receivables or deferred rental revenue amounts. The Company manages the residual value risk of its rented assets by (i) monitoring the quality, aging and anticipated retail market value of our rental fleet assets to determine the optimal period to remove an asset from the rental fleet, (ii) maintaining the quality of our assets through on-site parts and service support and (iii) requiring physical damage insurance of our lessee customers. We primarily dispose of our rental assets through the sale of the asset by our retail sales force.

Revenue generated from leasing activities is disclosed, by segment, in Note 3. The following is the balance of our dedicated rental fleet assets of our Construction segment as of January 31, 2020 and 2019, respectively:



	January 31, 2020		January 31, 2019
	(in thousands)		(in thousands)
Rental fleet equipment	$	104,133	$	111,164
Less accumulated depreciation	42,076		50,399
	$	62,057	$	60,765

NOTE 17 - RELATED PARTY TRANSACTIONS

Effective February 1, 2017, the Company and Peter Christianson (our former President and former member of our Board of Directors), who is a brother of Tony Christianson (a member of our Board of Directors), agreed to terminate a consulting arrangement between the parties. In connection with the termination, the Company agreed to pay Mr. Peter Christianson the sum of $0.7 million, payable in two equal installments in fiscal 2018 and fiscal 2019. All unvested stock options and shares of restricted stock held by Mr. Peter Christianson were allowed to vest as scheduled. As a result of the termination agreement, the Company recognized for fiscal 2018, a total of $0.8 million in termination costs, consisting of $0.7 million for future cash payments owed to Mr. Peter Christianson and $0.1 million for unvested shares of restricted stock. These termination costs are included in restructuring costs in the consolidated statements of operations. As of January 31, 2019, all amounts owed to Mr. Peter Christianson had been paid in full.

Effective September 8, 2017, the Company sold a real estate asset that was primarily used for field training purposes to Stiklestad LLC for $1.8 million. All consideration related to the transaction was exchanged at closing on September 8, 2017, and there are no amounts owed to either party following that date. Stiklestad LLC is owned by members of the family of David Meyer, the Company's Chief Executive Officer. No gain or loss was recognized on the transaction and the Company believes that the selling price approximated fair value.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 18 - INCOME TAXES

The components of income (loss) before income taxes for the years ended January 31, 2020, 2019 and 2018 consist of the following:



	2020		2019		2018
	(in thousands)
U.S.	$	14,148	$	10,994	$	(16,644	)
Foreign	504		5,160		2,205
Total	$	14,652	$	16,154	$	(14,439	)

The provision for (benefit from) income taxes charged to income for the years ended January 31, 2020, 2019 and 2018 consists of the following:



	2020			2019			2018
	(in thousands)
Current
Federal	$	897		$	(110	)	$	130
State	116			(189		)	50
Foreign	1,349			1,760			1,350
Total current taxes	2,362			1,461			1,530
Deferred
Federal	(375		)	2,071			(6,247		)
State	(1,929		)	(45		)	270
Foreign	641			485			(2,943		)
Total deferred taxes	(1,663		)	2,511			(8,920		)
	$	699		$	3,972		$	(7,390	)

The reconciliation of the statutory federal income tax rate to the Company's effective rate is as follows:



	2020		2019		2018
U.S. statutory rate	21.0	%	21.0	%	(33.8	)%
Foreign statutory rates	1.0	%	0.6	%	1.4	%
State taxes on income net of federal tax benefit	5.8	%	5.6	%	(4.3	)%
Valuation allowances	(36.6	)%	(5.2	)%	(4.4	)%
Impact of Ukraine currency gains or losses	10.5	%	2.0	%	1.0	%
U.S. statutory rate reduction	—	%	—	%	(13.9	)%
All other, net	3.1	%	0.6	%	2.8	%
	4.8	%	24.6	%	(51.2	)%

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Deferred tax assets and liabilities consist of the following as of January 31, 2020 and 2019:



	2020			2019
	(in thousands)
Deferred tax assets:
Inventory allowances	$	3,037		$	3,598
Intangible assets	2,192			2,670
Net operating losses	4,291			6,266
Accrued liabilities and other	3,533			4,120
Receivables	1,137			740
Stock-based compensation	1,095			1,103
Right of use lease liability	25,325			—
Other	452			806
Total deferred tax assets	41,062			19,303
Valuation allowances	(2,180		)	(6,727		)
Deferred tax assets, net of valuation allowances	$	38,882		$	12,576

Deferred tax liabilities:
Property and equipment	$	(16,752	)	$	(14,433	)
Right of use lease asset	(22,038		)	—
Senior convertible notes	—			(88		)
Total deferred tax liabilities	$	(38,790	)	$	(14,521	)

Net deferred tax asset (liability)	$	92		$	(1,945	)

On December 22, 2017, the U.S. government enacted tax legislation commonly referred to as the Tax Cuts and Jobs Act (the "Tax Act"). The Tax Act made broad changes to the U.S. tax code, including, among other things, to 1) reduce the U.S. federal corporate tax rate from 35% to 21%; 2) generally eliminate U.S. federal income taxes on dividends from foreign subsidiaries; 3) institute a one-time transaction tax on certain unrepatriated earnings of an entity's foreign subsidiaries; 4) create a new provision designed to tax global intangible low-taxed income ("GILTI"); 5) creates a new limitation on deductible interest expense; and 6) modify the rules related to uses and limitations of net operating losses.

The enactment of the Tax Act lowered the U.S. federal corporate tax rate from 35% to 21%, accordingly, for the fiscal year ended January 31, 2018, the Company had a blended corporate statutory tax rate of 33.8%, which is based on the number of days in the fiscal year before and after the enactment date. The Company recorded a net tax benefit of $1.8 million for the fiscal year ended January 31, 2018 as a result of remeasuring its domestic deferred tax assets, deferred tax liabilities and any valuation allowances based on the 21% corporate tax rate at which these deferred tax amounts are expected to reverse in the future. The Tax Act instituted a one-time transaction tax on previously untaxed accumulated and current earnings and profits of our foreign subsidiaries. The Company did not record a liability for the transaction tax because of a lack of accumulated earnings and profits, on a combined basis, of our foreign subsidiaries. The Tax Act requires that certain income (i.e., GILTI) earned by foreign subsidiaries must be included currently in gross income of the U.S. shareholder. The Company has elected to treat future GILTI inclusions as a current period expense when incurred.

As of January 31, 2020, the Company has recorded $47.0 million of net operating loss carryforwards within certain of its U.S. state and foreign jurisdictions; $8.5 million of net operating loss carryforwards are within foreign jurisdictions with unlimited carryforward periods, $9.0 million are within foreign jurisdictions that expire at various dates between the Company's fiscal years 2021 and 2025, and $29.4 million are within U.S. states that expire at various dates between the Company's fiscal years 2032 and 2038.

At the end of fiscal year ended January 31, 2020, the Company concluded, based upon all available evidence, it was more likely than not that it would have sufficient future taxable income to realize the Company’s U.S. federal and state deferred tax assets. As a result, the Company released the $4.6 million valuation allowance associated with these deferred tax assets and recognized a corresponding benefit from income taxes in the consolidated statement of operations for the year ended

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

January 31, 2020. The Company's conclusion regarding the realizability of such deferred tax assets was based on recent profitable domestic operations resulting in a cumulative profit over the three-year period ended January 31, 2020 and our projections of future profitability in the U.S.

In reviewing our foreign deferred tax assets as of January 31, 2020, we concluded that a full valuation allowance continued to be warranted in certain jurisdiction locations. In total, valuation allowances of $2.2 million exist for our international entities as of January 31, 2020.

At the end of fiscal year 2019, we concluded that a partial valuation allowance continued to be warranted for U.S. federal and state deferred tax assets, including state net operating losses, and a full valuation allowance for certain of our foreign deferred tax assets, including net operating losses. In total, the valuation allowances of $6.7 million existed as of January 31, 2019. The recognition of the valuation allowances for our U.S. and foreign deferred tax assets was based on the presence of historical losses and our expected future sources of taxable income, including the anticipated future reversal of our existing deferred tax assets and liabilities.

During the fiscal year ended January 31, 2018, the Company concluded, based upon all available evidence, it was more likely than not that it would have sufficient future taxable income to realize the deferred tax assets of its Ukrainian subsidiary. As a result, the Company released the $3.5 million valuation allowance associated with these deferred tax assets and recognized a corresponding benefit from income taxes in the consolidated statement of operations for the year ended January 31, 2018. The Company's conclusion regarding the realizability of such deferred tax assets was based on recent profitable operations in Ukraine resulting in a cumulative profit over the three-year period ending January 31, 2018, our projections of future profitability in Ukraine, the relative economic and political stability in Ukraine and the unlimited carryforward period of net operating losses in Ukraine.

The Company files income tax returns in the U.S. federal jurisdiction and various states and foreign countries. It is no longer subject to income tax examinations by U.S. federal tax authorities for fiscal years ended prior to January 31, 2017 and state tax authorities for fiscal years ended prior to January 31, 2016. Certain foreign jurisdictions are no longer subject to income tax examinations for the calendar year periods ranging between 2012 and 2015, depending on the jurisdiction of the entity.

As of January 31, 2020, the Company had accumulated undistributed earnings in non-U.S. subsidiaries of approximately $17.0 million. Upon repatriation of such earnings the Company could be subject to additional U.S. or foreign taxes. The Company has not recorded a deferred tax liability associated with these undistributed earnings as such earnings are to be reinvested outside of the U.S. indefinitely. It is not practicable to estimate the amount of additional tax that might be payable if such earnings were repatriated.

NOTE 19 - CAPITAL STRUCTURE

The Company's certificate of incorporation provides it with the authority to issue 50,000,000 shares of $0.00001 par value stock, consisting of 45,000,000 shares of common stock and 5,000,000 shares classified as undesignated.

NOTE 20 - STOCK-BASED COMPENSATION

Stock-Based Compensation Plans

The Company has two stock-based compensation plans, the 2014 Equity Incentive Plan and the 2005 Equity Incentive Plan (collectively the "Plans"), to provide incentive compensation to participants for services that have been or will be performed for continuing as employees or members of the Board of Directors of the Company. Under these plans, which are approved by the stockholders of the Company, the Company may grant incentive stock options, non-qualified stock options and restricted stock for up to a maximum number of shares of common stock set forth in the Plans under all forms of awards. Shares issued for stock-based awards consist of authorized but unissued shares. The Plans authorize and make available 1,650,000 shares for equity awards. As of January 31, 2020, the Company has 482,789 shares authorized and available for future equity awards.

Compensation cost arising from stock-based compensation and charged to operations was $2.7 million, $2.7 million and $3.1 million for the years ended January 31, 2020, 2019 and 2018. The related income tax benefit (net) was $0.6 million, $0.8 million and $1.2 million for the years ended January 31, 2020, 2019 and 2018.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Restricted Stock Awards ("RSAs")

The Company grants RSAs as part of its long-term incentive compensation to employees and members of the Board of Directors of the Company. The fair value of these awards is determined based on the closing market price of the Company's stock on the date of grant. The RSAs primarily vest over a period of three to six years for employees and over one year for members of the Board of Directors. The Company recognizes compensation expense ratably over the vesting period of the award. The restricted common stock underlying these awards are deemed issued and outstanding upon grant, and carry the same voting and dividend rights of unrestricted outstanding common stock.

The following table summarizes RSA activity for the year ended January 31, 2020:



	Shares		Weighted Average Grant Date Fair Value
	(in thousands)
Nonvested at January 31, 2019	380		$	15.88
Granted	174		16.48
Forfeited	(26	)	15.89
Vested	(167	)	16.12
Nonvested at January 31, 2020	361		16.14

The weighted-average grant date fair value of RSAs granted was $16.48, $17.22 and $17.47 during the years ended January 31, 2020, 2019 and 2018. The total fair value of RSAs vested was $3.8 million, $3.6 million and $3.6 million during the years ended January 31, 2020, 2019 and 2018. As of January 31, 2020, there was $2.7 million of unrecognized compensation cost related to nonvested RSAs that is expected to be recognized over a weighted-average period of 1.9 years.

Restricted Stock Units ("RSUs")

The Company grants RSUs as part of its long-term incentive compensation to certain employees of the Company in our European operations. The fair value of these awards is determined based on the closing market price of the Company's stock on the date of grant. The RSUs primarily vest over a period of three to six years. The Company recognizes compensation expense ratably over the vesting period of the award. The restricted common stock underlying these awards are not deemed issued or outstanding upon grant, and do not carry any voting or dividend rights.

The following table summarizes RSU activity for the year ended January 31, 2020:



	Shares		Weighted Average Grant Date Fair Value
	(in thousands)
Nonvested at January 31, 2019	5		$	14.19
Granted	11		17.79
Vested	(2	)	13.53
Nonvested at January 31, 2020	14		$	17.06

The weighted-average grant date fair value of RSUs granted was $17.79 and $17.58 for the fiscal years ended January 31, 2020 and 2019. There were no RSUs granted during fiscal 2019. As of January 31, 2020, there was $0.2 million of unrecognized compensation cost related to nonvested RSUs that is expected to be recognized over a weighted-average period of 2.2 years.

During the year ended January 31, 2019, the Company modified certain of its RSU agreements to require the settlement of all future vested awards to be paid in cash in an amount equal to the number of vested awards multiplied by the stock price of the Company on the date of vesting. Due to the cash settlement provision, these awards became liability-classified share-based payments on the modification date. The accounting for this modification did not have a material impact on the Company's consolidated statement of operations or financial position.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Long-Term Cash Incentive Awards

The Company grants long-term cash incentive awards as part of its long-term incentive compensation to certain international employees of the Company. The awards vest over a period of approximately four years and entitle the award recipient to a cash payment on the vesting date equal to the number of vested shares multiplied by the stock price of the Company on the date of vesting. These awards are liability-classified share-based payment awards in which fair value of the award is remeasured at each period until the liability is settled. Fair value of these awards is determined based on the closing price of the Company's stock as of the end of each reporting period. Changes in the fair value of the liability are recognized as compensation cost over the requisite service period. The percentage of the fair value that is accrued as compensation cost at the end of each period is equal to the percentage of the requisite service that has been rendered at that date.

The following table summarizes activity for long-term cash incentive awards for the year ended January 31, 2020:



	Shares		Weighted Average Grant Date Fair Value
	(in thousands)
Nonvested at January 31, 2019	24		$	16.22
Granted	17		16.63
Forfeited	(3	)	16.07
Vested	(11	)	16.65
Nonvested at January 31, 2020	27		$	16.48

The weighted-average grant date fair value of long-term cash incentive awards granted was $16.63 during the year ended January 31, 2020. As of January 31, 2020, based on the Company's stock price on that day, there was $0.2 million of unrecognized compensation cost related to nonvested awards that is expected to be recognized over a weighted-average period of 1.3 years.

NOTE 21 - ACCUMULATED OTHER COMPREHENSIVE INCOME (LOSS)

The following is a summary of the changes in accumulated other comprehensive income (loss), by component, for the fiscal years ended January 31, 2020, 2019 and 2018:



	Foreign Currency Translation Adjustment			Net Investment Hedging Instruments, Unrealized Gain		Cash Flow Hedging Instruments, Unrealized Gain (Loss)			Total Accumulated Other Comprehensive Income (Loss)
	(in thousands)
Balance, January 31, 2017	$	(6,810	)	$	2,711	$	(684	)	$	(4,783	)
Other comprehensive income (loss) before reclassifications	2,399			—		48			2,447
Amounts reclassified from accumulated other comprehensive income (loss)	—			—		1,091			1,091
Total other comprehensive income (loss), before tax	2,399			—		1,139			3,538
Tax effect	—			—		(455		)	(455		)
Total other comprehensive income (loss), net of tax	2,399			—		684			3,083
Balance, January 31, 2018	(4,411		)	2,711		—			(1,700		)
Total other comprehensive loss	(640		)	—		—			(640		)
Balance, January 31, 2019	(5,051		)	2,711		—			(2,340		)
Total other comprehensive loss	(880		)	—		—			(880		)
Balance, January 31, 2020	$	(5,931	)	$	2,711	$	—		$	(3,220	)

Income taxes are not provided for foreign currency translation adjustments arising from permanent investments in international subsidiaries. Reclassifications are made to avoid double counting in comprehensive income (loss) items that are also recorded as part of net income (loss). Reclassification amounts from cash flow hedging instruments for the year ended January 31, 2018 are recorded in floorplan interest expense in the consolidated statements of operations. The tax effect of these reclassifications, recognized as a tax benefit in the amount of $0.4 million for the year ended January 31, 2018, are recorded in provision for (benefit from) income taxes in the consolidated statements of operations.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 22 - EMPLOYEE BENEFIT PLANS

The Company has a 401(k) profit-sharing plan ("401(k) Plan") for full-time employees at least 19 years of age. The Company matches 50% of the first 6% of participating employees' contributions. In addition, the Company may make a discretionary contribution to the 401(k) Plan as determined by the Board of Directors, with a maximum amount equal to the amount allowed under the IRS regulations. The Company recognized expense for contributions made to the 401(k) Plan totaling $3.0 million, $2.7 million and $2.5 million for the years ended January 31, 2020, 2019 and 2018. All amounts contributed during these years reflected matching contributions, as no discretionary contributions were made by the Company to the 401(k) Plan.

NOTE 23 - BUSINESS COMBINATIONS

Fiscal 2020

On January 1, 2019, the Company, through its German subsidiary, acquired certain assets of ESB Agrartechnik GmbH ("ESB"). ESB is a full-service agriculture equipment dealership in Eastern Germany. The Company's acquisition of ESB further expands its presence in the German market. The total consideration transferred for the acquired business was $3.0 million paid in cash. This acquisition was recognized in the fiscal year ended January 31, 2020 as the acquisition occurred within the Company's International segment in which all entities maintain a calendar year reporting period.

On October 1, 2019, the Company acquired certain assets of Uglem-Ness Co. The acquired business consists of one Case IH agriculture equipment store in Northwood, North Dakota. The service area is contiguous to the Company's existing locations in Grand Forks and Casselton, North Dakota and Ada, Minnesota. The total consideration transferred for the acquired business was $10.9 million paid in cash, including the acquired real estate, which was finalized in January 2020 for $2.1 million.

In connection with the acquisition, the Company acquired from CNH Industrial and certain other manufacturers equipment and parts inventory previously owned by Uglem-Ness Co. Upon acquiring such inventories, the Company has been offered floorplan financing by the respective manufacturers. In total, the Company acquired inventory and recognized a corresponding financing liability of $7.4 million. The recognition of these inventories and the associated financing liabilities are not included as part of the accounting for the business combination.

Fiscal 2019

On July 2, 2018, the Company acquired all interests of two commonly-controlled companies, AGRAM Landtechnikvertrieb GmbH and AGRAM Landtechnik Rollwitz GmbH (collectively "AGRAM"), for $19.2 million in cash consideration. Founded in 1990, AGRAM is a CaseIH and Steyr dealership complex consisting of four agriculture dealership locations in the following cities of Germany: Altranft, Burkau, Gutzkow, and Rollwitz. Our acquisition of these entities provided the Company the opportunity to expand its international presence into the large, well-established German market.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Purchase Price Allocation

Each of the above acquisitions has been accounted for under the acquisition method of accounting, which requires the Company to estimate the acquisition date fair value of the assets acquired and liabilities assumed. The accounting for all business combinations is complete as of January 31, 2020. The following table presents the aggregate purchase price allocations for all acquisitions completed during the fiscal years ended January 31, 2020 and 2019:



	Year Ended January 31,
	2020		2019
	(in thousands)
Assets acquired:
Cash	$	—	$	3,857
Receivables	440		5,340
Inventories	6,466		21,725
Prepaid expenses and other	—		887
Property and equipment	3,810		3,512
Intangible assets	1,973		1,944
Goodwill	1,198		924
Other	—		61
	13,887		38,250
Liabilities Assumed:
Accounts payable	—		1,553
Floorplan payable	—		13,820
Deferred revenue	—		85
Accrued expenses and other	—		1,279
Long-term debt	—		1,725
Deferred income taxes	—		632
	—		19,094
Net assets acquired	$	13,887	$	19,156

Goodwill recognized by segment:
Agriculture	$	699	$	—
Construction	—		—
International	499		924
Goodwill expected to be deductible for tax purposes	1,198		—

The recognition of goodwill in the above business combinations arose from the acquisition of an assembled workforce and anticipated synergies expected to be realized. For business combinations occurring during the year ended January 31, 2020, the Company recognized, in the aggregate, a customer relationship intangible asset of $0.2 million, a non-competition intangible asset of $0.1 million, and a distribution rights intangible asset of $1.6 million. For business combinations occurring during the year ended January 31, 2019, the Company recognized a customer relationship intangible asset of $0.1 million and a distribution right intangible asset of $1.8 million. The acquired non-competition and customer relationship intangible assets are being amortized over periods ranging from three to five years. The distribution rights assets are indefinite-lived intangible assets not subject to amortization, but are tested for impairment annually, or more frequently upon the occurrence of certain events or when circumstances indicate that impairment may be present. The Company estimated the fair value of these intangible assets using a multi-period excess earnings model, an income approach. Acquisition related costs were not material for the fiscal years ended January 31, 2020 and 2019, and have been expensed as incurred and recognized as operating expenses in the consolidated statements of operations.

NOTE 24 - FAIR VALUE OF FINANCIAL INSTRUMENTS

As of January 31, 2020 and 2019, the fair value of the Company's foreign currency contracts, which are either assets or liabilities measured at fair value on a recurring basis, was not material. These foreign currency contracts were valued using a discounted cash flow analysis, an income approach, utilizing readily observable market data as inputs, which is classified as a Level 2 fair value measurement.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

The Company also valued certain long-lived assets at fair value on a non-recurring basis as of January 31, 2020, April 30, 2019 and January 31, 2019 as part of its long-lived asset impairment testing. The estimated fair value of such assets as of January 31, 2020, and January 31, 2019 was $2.8 million and $0.9 million. Fair value was determined by utilizing an income approach incorporating both observable and unobservable inputs, and are deemed to be Level 3 fair value inputs. The most significant unobservable inputs include forecasted net cash generated from the use of the assets and the discount rate applied to such cash flows to arrive at a fair value estimate. In addition, in certain instances, the Company estimated the fair value of long-lived assets to be approximately zero, as no future cash flows were assumed to be generated from the use of such assets and the expected sales values were deemed to be nominal. All such fair value measurements were based on unobservable inputs and thus are Level 3 fair value inputs.

The Company also has financial instruments that are not recorded at fair value in its consolidated financial statements. The carrying amount of cash, receivables, payables, short-term debt and other current liabilities approximates fair value because of the short maturity and/or frequent repricing of those instruments, which are Level 2 fair value inputs. Based upon current borrowing rates with similar maturities, which are Level 2 fair value inputs, the carrying value of long-term debt approximates the fair value as of January 31, 2020 and 2019. The following table provides details on the Senior Convertible Notes as of January 31, 2019. During fiscal 2020, the Company paid off the remaining Senior Convertible Notes. The difference between the face value and the carrying value of these notes is the result of the allocation between the debt and equity components, and unamortized debt issuance costs (see Note 11). Fair value of the Senior Convertible Notes was estimated based on Level 2 fair value inputs.



	January 31, 2019
	Estimated Fair Value		Carrying Value		Face Value
	(in thousands)
Senior convertible notes	$	45,644	$	45,249	$	45,644

NOTE 25 - SEGMENT INFORMATION AND OPERATING RESULTS

The Company has three reportable segments: Agriculture, Construction and International. The Company's segments are determined based on management structure, which is organized based on types of products sold and geographic areas, as described in the following paragraphs. The operating results for each segment are reported separately to the Company's Chief Executive Officer to make decisions regarding the allocation of resources, to assess the Company's operating performance and to make strategic decisions.

The Company's Agriculture segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from large-scale farming to home and garden use in North America. This segment also includes ancillary sales and services related to agricultural activities and products such as equipment transportation, Global Positioning System ("GPS") signal subscriptions and finance and insurance products.

The Company's Construction segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from heavy construction to light industrial machinery use to customers in North America. This segment also includes ancillary sales and services related to construction activities such as equipment transportation, GPS signal subscriptions and finance and insurance products.

The Company’s International segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from large-scale farming and construction to home and garden use to customers in Eastern Europe.

Revenue generated from sales to customers outside of the United States was $236.1 million, $232.7 million and $208.9 million for the years ended January 31, 2020, 2019 and 2018. As of January 31, 2020 and 2019, $11.4 million and $12.3 million of the Company's long-lived assets were held in its European subsidiaries.

The Company retains various unallocated income/(expense) items and assets at the general corporate level, which the Company refers to as "Shared Resources" in the table below. Shared Resource assets primarily consist of cash and property and equipment. Revenue between segments is immaterial.

Certain financial information for each of the Company's business segments is set forth below.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)



	Year Ended January 31,
	2020			2019			2018
	(in thousands)
Revenue
Agriculture	$	749,042		$	726,793		$	689,854
Construction	320,034			301,989			293,860
International	236,095			232,723			208,892
Total	$	1,305,171		$	1,261,505		$	1,192,606
Income (Loss) Before Income Taxes
Agriculture	$	18,036		$	16,799		$	(3,678	)
Construction	(2,290		)	(4,400		)	(7,278		)
International	504			5,160			2,205
Segment income (loss) before income taxes	16,250			17,559			(8,751		)
Shared Resources	(1,598		)	(1,405		)	(5,688		)
Total	$	14,652		$	16,154		$	(14,439	)
Total Impairment
Agriculture	$	2,807		$	886		$	175
Construction	957			1,114			498
International	—			156			—
Total	$	3,764		$	2,156		$	673
Restructuring Costs
Agriculture	$	—		$	441		$	6,886
Construction	—			(27		)	2,093
International	—			—			62
Segment impairment	—			414			9,041
Shared Resources	—			—			1,458
Total	$	—		$	414		$	10,499
Interest Income
Agriculture	$	54		$	84		$	164
Construction	217			234			314
International	44			81			9
Segment interest income	315			399			487
Shared Resources	16			(73		)	9
Total	$	331		$	326		$	496
Interest Expense
Agriculture	$	5,142		$	4,272		$	5,781
Construction	7,221			6,308			7,750
International	3,504			3,313			2,510
Segment interest expense	15,867			13,893			16,041
Shared Resources	(6,061		)	(19		)	958
Total	$	9,806		$	13,874		$	16,999

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)



	Year Ended January 31,
	2020		2019		2018
	(in thousands)
Depreciation and Amortization
Agriculture	$	5,095	$	4,997	$	5,411
Construction	12,537		13,652		14,297
International	2,402		1,804		1,366
Segment depreciation and amortization	20,034		20,453		21,074
Shared Resources	8,033		3,152		4,031
Total	$	28,067	$	23,605	$	25,105
Capital Expenditures
Agriculture	$	4,699	$	2,473	$	2,950
Construction	15,713		7,012		20,080
International	1,768		1,944		1,332
Segment capital expenditures	22,180		11,429		24,362
Shared Resources	2,836		522		1,753
Total	$	25,016	$	11,951	$	26,115

			January 31, 2020		January 31, 2019
Total Assets			(in thousands)
Agriculture			$	444,942	$	316,224
Construction			275,645		227,261
International			191,513		170,187
Segment assets			912,100		713,672
Shared Resources			63,243		78,766
Total			$	975,343	$	792,438

NOTE 26 - SELECTED QUARTERLY FINANCIAL DATA (Unaudited)

The following reflects selected quarterly financial information for fiscal years 2020 and 2019.



	2020									2019
	First quarter			Second quarter		Third quarter		Fourth quarter		First quarter			Second quarter		Third quarter		Fourth quarter
	(in thousands, except per share data)

Revenue	$	278,292		$	314,981	$	360,936	$	350,964	$	243,714		$	297,231	$	360,913	$	359,647
Gross Profit	53,900			64,027		71,774		61,118		47,558			58,901		69,542		55,585
Net Income (Loss)	(445		)	5,511		8,214		673		(1,588		)	5,180		10,776		(2,160		)
Earnings (Loss) per Share-Basic	(0.02		)	0.25		0.37		0.03		(0.07		)	0.23		0.49		(0.10		)
Earnings (Loss) per Share-Diluted	(0.02		)	0.25		0.37		0.03		(0.07		)	0.23		0.48		(0.10		)

In the fourth quarter of fiscal 2020, the Company recognized an income tax benefit of $4.6 million from the release of the U.S. valuation allowance previously recognized for deferred tax assets. Further details of these tax matters are discussed in Note 18.

Table of Contents

TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 27 - SUBSEQUENT EVENTS

On January 31, 2020, the Company entered into a definitive purchase agreement to acquire HorizonWest Inc., which owns a three store CaseIH agriculture dealership complex in Scottsbluff and Sidney, Nebraska and Torrington, Wyoming. In its most recent fiscal year, HorizonWest generated revenue of approximately $26 million. The Company expects to close the acquisition in May 2020.

Effective March 23, 2020, the Company announced it would temporarily prevent public access to its stores in response to the increased impact from novel coronavirus (COVID-19). While customers temporarily do not have access to our facilities, we are fully staffed; and we are using technology, mobile service fleets and alternative delivery solutions to provide equipment, parts, service and rental to our customers. While this is expected to be temporary, the current circumstances are dynamic. The impacts of COVID-19 on our business operations, financial results, and on customer demand cannot be reasonably estimated at this time.

On April 3, 2020, the Company entered into a Third Amended and Restated Credit Agreement, arranged by Bank of America, with a syndicate of lenders consisting of Wells Fargo, Regions, BBVA, Sterling National Bank and AgCountry Farm Credit. The new credit agreement provides for an aggregate $250 million financing commitment by the lenders, consisting of an aggregate floorplan financing commitment of $185 million and an aggregate working capital commitment of $65 million. Loans under the new credit facility will carry an initial effective interest rate equal to LIBOR plus an applicable margin of 1.5% per annum, based on the Company’s liquidity position. The terms of the new agreement are similar to those in the previous credit facility, but favorably impacted by the increased advanced rates adding to the Company's excess availability. In conjunction with entering into the new credit agreement, the Company repaid in full all debt outstanding under its previous Wells Fargo Credit Agreement, which was to mature in October, 2020.

Table of Contents

Schedule II—Valuation and Qualifying Accounts and Reserves

Titan Machinery Inc.



Classification	Beginning Balance		Additions Charged to Expenses		Additions from Business Combinations		Deductions for Write-offs, Net of Recoveries			Foreign Currency Translation Adjustments			Ending Balance
	(in thousands)
Valuation reserve deduction from receivables:
Year Ended January 31, 2020	$	3,528	$	2,497	$	—	$	(872	)	$	(30	)	$	5,123
Year Ended January 31, 2019	2,951		835		958		(1,173		)	(43		)	3,528
Year Ended January 31, 2018	3,630		2,333		—		(3,138		)	126			2,951

Table of Contents

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures. After evaluating the effectiveness of the Company's disclosure controls and procedures pursuant to Rule 13a-15(b) of the Securities Exchange Act of 1934 ("Exchange Act") as of the end of the period covered by this Form 10-K, our Chief Executive Officer and Chief Financial Officer, with the participation of the Company's management, have concluded that the Company's disclosure controls and procedures (as defined in Exchange Act Rule 13a-15(e)) are effective.

Management's Report on Internal Control Over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO"). Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of January 31, 2020.

Deloitte & Touche LLP, the independent registered public accounting firm that audited the consolidated financial statements included in this Form 10-K, has also audited our internal control over financial reporting as of January 31, 2020, as stated in their attestation report included in Item 8 of this Form 10-K.

Changes in Internal Control over Financial Reporting. There has not been any change in the Company's internal control over financial reporting (as defined in Exchange Act Rule 13a-15(f)) during its most recently completed fiscal quarter ended January 31, 2020 that has materially affected, or is reasonably likely to materially affect, the Company's internal control over financial reporting.

ITEM 9B. OTHER INFORMATION

None.

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

Other than the information included in Part I of this Form 10-K under the heading "Information About Our Executive Officers," the information required by Item 10 is incorporated by reference to the sections labeled "Board of Directors" and "Corporate Governance. all of which will appear in our definitive proxy statement for our 2020 Annual Meeting of Stockholders.

ITEM 11. EXECUTIVE COMPENSATION

The information required by Item 11 is incorporated herein by reference to the sections labeled "Compensation Discussion and Analysis," "Compensation Committee Report," "Compensation Committee Interlocks and Insider Participation," "Executive Compensation," and "Non-Employee Director Compensation," all of which will appear in our definitive proxy statement for our 2020 Annual Meeting of Stockholders.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by Item 12 is incorporated herein by reference to the sections entitled "Security Ownership of Principal Stockholders and Management" and "Executive Compensation - Equity Compensation Plan Information," both of which will appear in our definitive proxy statement for our 2020 Annual Meeting of Stockholders.

Table of Contents

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by Item 13 is incorporated herein by reference to the sections entitled "Corporate Governance—Independence" and "Certain Relationships and Related Transactions," both of which will appear in our definitive proxy statement for our 2020 Annual Meeting of Stockholders.

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by Item 14 is incorporated herein by reference to the section entitled "Fees of the Independent Registered Public Accounting Firm," which will appear in our definitive proxy statement for our 2020 Annual Meeting of Stockholders.

PART IV

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES


(a)	Documents filed as part of this report.


(1)	Financial Statements. The following financial statements are included in Part II, Item 8 of this Annual Report on Form 10-K:

Report of Deloitte & Touche LLP on Consolidated Financial Statements as of January 31, 2020 and 2019 and for each of the three years in the period ended January 31, 2020

Report of Deloitte & Touche LLP on Internal Control Over Financial Reporting as of January 31, 2020

Consolidated Balance Sheets as of January 31, 2020 and 2019

Consolidated Statements of Operations for each of the three years in the period ended January 31, 2020

Consolidated Statements of Comprehensive Income (loss) for each of the three years in the period ended January 31, 2020

Consolidated Statements of Stockholders' Equity for each of the three years in the period ended January 31, 2020

Consolidated Statements of Cash Flows for each of the three years in the period ended January 31, 2020

Notes to Consolidated Financial Statements


(2)	Financial Statement Schedules. The following consolidated financial statement schedule should be read in conjunction with the consolidated financial statements and Report of Deloitte & Touche LLP on the consolidated financial statements included in Part II, Item 8 of this annual report on Form 10-K:

Schedule II—Valuation and Qualifying Accounts and Reserves

All other financial statement schedules have been omitted, because they are not applicable, are not required, or the information is included in the Financial Statements or Notes thereto


(3)	Exhibits. See the Exhibit Index to our Form 10-K immediately following below:

Table of Contents

EXHIBIT INDEX

TITAN MACHINERY INC.

FORM 10-K



No.		Description
3.1		Certificate of Incorporation of the registrant, as amended (incorporated herein by reference to Exhibit 3.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 10, 2012, File No. 001-33866).

3.2		Bylaws of the registrant, as amended (incorporated herein by reference to Exhibit 3.2 of the registrant's Annual Report on Form 10-K filed with the Commission on April 16, 2009, File No. 001-33866).

4.1		Specimen Certificate representing shares of common stock of Titan Machinery Inc. (incorporated by reference to Exhibit 4.1 of the registrant's Amendment No. 6 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on December 3, 2007).

4.2		Indenture, dated as of April 24, 2012, by and between the registrant and Wells Fargo Bank, National Association, as Trustee (incorporated by reference to Exhibit 4.1 of the registrant's Current Report on Form 8-K filed with the Commission on April 24, 2012, File No. 001-33866).

4.3*		Description of Securities of Titan Machinery registered under Section 12 of the Exchange Act of 1934, as amended.

10.1		Amended and Restated Employment Agreement, dated March 6, 2013, between David Meyer and the registrant (incorporated herein by reference to Exhibit 10.2 of the registrant's Annual Report on Form 10-K filed with the Commission on April 10, 2013, File No. 001-33866).**

10.1.1		Amendment dated March 1, 2014 to the Amended and Restated Employment Agreement, dated March 6, 2013, between David Meyer and the registrant (incorporated herein by reference to Exhibit 10.54 of the registrant's Annual Report on Form 10-K filed with the Commission on April 11, 2014).**

10.2		Amended and Restated Employment Agreement, dated September 4, 2015, between Mark Kalvoda and the registrant (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2015).**

10.2.1		Amendment dated September 1, 2016 to the Amended and Restated Employment Agreement, dated September 4, 2015 between Mark Kalvoda and the registrant (incorporated herein by reference to Exhibit 10.2 of the registrant’s Quarterly Report on Form 10-Q filed with the Commission on September 1, 2016).**

10.3		Executive Employment Agreement, dated September 5, 2018, between Bryan J. Knutson and the registrant (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 6, 2018).**

10.4		Agricultural Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

10.4.1		Amendment to the Agricultural Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.4 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

10.5		Construction Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

10.5.1		Amendment to the Construction Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

10.6		New Holland Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.5 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

10.6.1		Amendment to the New Holland Equipment Sales & Service Agreement, dated May 31, 2017, between CNH Industrial America LLC and the registrant (incorporated herein by reference to Exhibit 10.6 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 2, 2017).

10.7		Dealer Security Agreement dated April 14, 2003 between New Holland North America, Inc. and the registrant (incorporated herein by reference to Exhibit 10.14 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).

Table of Contents



No.		Description
10.8		Dealer Security Agreements between CNH America LLC and the registrant (incorporated herein by reference to Exhibit 10.15 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).

10.9		Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement, dated November 13, 2007, between CNH Capital America LLC and the registrant (incorporated herein by reference to Exhibit 10.25 of the registrant's Amendment No. 5 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on November 27, 2007).

10.9.1		Letter Agreement with CNH Capital America, LLC dated September 30, 2011, amending the November 13, 2007 Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 9, 2011, File No. 001-33866).

10.9.2		Letter Agreement with CNH Capital America, LLC dated November 20, 2012, amending the November 13, 2007 Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 6, 2012, File No. 001-33866).

10.9.3		Letter Agreement with CNH Capital America, LLC dated February 15, 2013, amending the November 13, 2007 Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement (incorporated herein by reference to Exhibit 10.49 of the registrant's Annual Report on Form 10-K filed with the Commission on April 10, 2013, File No. 001-33866).

10.9.4		Amendment dated December 8, 2014 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 10, 2014, File No. 001-33866).

10.9.5		Second Amendment dated March 31, 2016 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.17.5 of the registrant's Annual Report on Form 10-K filed with the Commission on April 13, 2016).

10.9.6		Amendment dated October 5, 2017 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 7, 2017).

10.9.7		Amendment dated April 1, 2018 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.8.7 of the registrant's Annual Report on Form 10-K filed with the Commission on April 6, 2018).

10.9.8		Amendment dated May 31, 2018 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.8.7 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 7, 2018).

10.9.9		Amendment dated November 30, 2018 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.1 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 6, 2018).

10.9.10		Amendment dated January 18, 2019 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.9.10 of the registrant's Annual Report on Form 10-K filed with the Commission on April 5, 2019).

10.9.11		Amendment dated November 13, 2019 to the Amended and Restated Wholesale Floor Plan Credit Facility and Security Agreement dated November 13, 2007 by and between the registrant and CNH Industrial Capital America LLC (incorporated herein by reference to Exhibit 10.1 of the registrant’s Quarterly Report on Form 10-Q filed with the Commission on December 5, 2019).

10.10		Third Amended and Restated Credit Agreement dated as of April 3, 2020 by and among the registrant, Bank of America, National Association, and the Financial Institutions Party Thereto (incorporated by reference to Exhibit 10.1 of the registrant's Current Report on Form 8-K filed with the Commission on April 6, 2020).

Table of Contents



No.		Description
10.11		Amended and Restated 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.1 of the registrant's Current Report on Form 8-K filed with the Commission on June 6, 2011, File No. 001-33866).**

10.12		Form of Incentive Stock Option Agreement under the 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.22 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).**

10.13		Form of Non-Qualified Stock Option Agreement under the 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.23 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).**

10.14		Form of Restricted Stock Agreement under the 2005 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.24 of the registrant's Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007).**

10.15		Titan Machinery Inc. 2014 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.1 of the registrant's Current Report on Form 8-K filed with the Commission on June 3, 2014, File No. 001-33866).**

10.16		Form of Titan Machinery Inc. Restricted Stock Agreement (for non-employee directors) under the 2014 Equity Incentive Plan, revised effective June 1, 2018 (incorporated herein by reference to Exhibit 10.16 of the registrant's Annual Report on Form 10-K filed with the Commission on April 5, 2019).**

10.17		Form of Titan Machinery Inc. Restricted Stock Agreement under the 2014 Equity Incentive Plan (incorporated herein by reference to Exhibit 10.3 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 5, 2014, File No. 001-33866).**

10.17.1		Form of Titan Machinery Inc. Restricted Stock Agreement under the 2014 Equity Incentive Plan, revised effective June 1, 2018 (incorporated herein by reference to Exhibit 10.17.1 of the registrant's Annual Report on Form 10-K filed with the Commission on April 5, 2019). **

10.18		Form of Titan Machinery Inc. Restricted Stock Unit Agreement under the 2014 Equity Incentive Plan, used for purposes of granting awards to European employees (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2014).**

10.18.1		Form of Titan Machinery Inc. Restricted Stock Unit Agreement under the 2014 Equity Incentive Plan, used for purposes of granting awards to European employees, revised effective June 1, 2017 (incorporated herein by reference to Exhibit 10.18.1 of the registrant's Annual Report on Form 10-K with the Commission on April 5, 2019). **

10.19		Form of Director and Officer Indemnification Agreement (incorporated herein by reference to Exhibit 10.19 of the registrant's Annual Report on Form 10-K with the Commission on April 5, 2019).

10.20		Titan Machinery Inc. Non-Employee Director Compensation Plan (incorporated herein by reference to Exhibit 10.2 of the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2015).**

10.21		Description of Titan Machinery Inc.’s Executive Cash Bonus Plan (incorporated herein by reference to Exhibit 10.34 of the registrant’s Annual Report on Form 10-K filed with the Commission on April 15, 2015). **

21.1*		Subsidiaries of Titan Machinery Inc.

23.1*		Consent of Deloitte & Touche LLP

24.1*		Power of Attorney

31.1*		Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

31.2*		Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

32.1*		Certification of Chief Executive Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

32.2*		Certification of Chief Financial Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

101*		The following materials from Titan Machinery Inc.'s Annual Report on Form 10-K for the year ended January 31, 2020 formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Statements of Operations for the fiscal years ended January 31, 2020, 2019 and 2018, (ii) the Consolidated Statements of Operations for the fiscal years ended January 31, 2020, 2019 and 2018, (iii) the Consolidated Statements of Comprehensive Income (Loss) for the fiscal years ended January 31, 2020, 2019 and 2018, (iv) the Consolidated Statements of Stockholders' Equity for the fiscal years ended January 31, 2020, 2019 and 2018, (v) the Consolidated Statements of Cash Flows for the fiscal years ended January 31, 2020, 2019 and 2018, and (vi) the Notes to the Consolidated Financial Statements.

Table of Contents

______________________________________________________


*	Filed herewith


**	Indicates management contract or compensatory plan or arrangement.

ITEM 16. FORM 10-K SUMMARY

Not applicable.

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Dated: April 6, 2020

TITAN MACHINERY INC.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:



Signature	Title	Date
/s/ DAVID J. MEYER	Board Chair, Chief Executive Officer (principal executive officer)	April 6, 2020
David J. Meyer

/s/ MARK KALVODA	Chief Financial Officer (principal financial officer and principal accounting officer)	April 6, 2020
Mark Kalvoda

*	Director
Tony Christianson		April 6, 2020

*	Director
Stanley Dardis		April 6, 2020

*	Director
Stan Erickson		April 6, 2020

*	Director
Christine Hamilton		April 6, 2020

*	Director
John Henderson		April 6, 2020

*	Director
Jody Horner		April 6, 2020

*	Director
Richard Mack		April 6, 2020



*By		/s/ MARK KALVODA
		Mark Kalvoda, Attorney-in-Fact