TREX CO INC - Annual Report: 2013 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

(Mark One)

For the fiscal year ended December 31, 2013

For the transition period from                     to                     

Commission file number: 001-14649

Trex Company, Inc.

(Exact name of registrant as specified in its charter)

(540) 542-6300

Registrant’s telephone number, including area code:

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ¨    No  þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posed pursuant to Rule 405 of Regulation S-T during the preceding 12 months.    Yes  þ    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting Company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting Company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell Company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  þ

The aggregate market value of the registrant’s common equity held by non-affiliates of the registrant at June 30, 2013, which was the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $805.6 million based on the closing price of the common stock as reported on the New York Stock Exchange on such date and assuming, for purposes of this computation only, that the registrant’s directors, executive officers and beneficial owners of 10% or more of the registrant’s common stock are affiliates.

The number of shares of the registrant’s common stock outstanding on February 13, 2014 was 16,741,324.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the following documents are incorporated by reference in this Form 10-K as indicated herein:

Table of Contents

TABLE OF CONTENTS

i

Table of Contents

NOTE ON FORWARD-LOOKING STATEMENTS

This report, including the information it incorporates by reference, contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. We intend our forward-looking statements to be covered by the safe harbor provisions for forward-looking statements in these sections. All statements regarding our expected financial position and operating results, our business strategy, our financing plans, forecasted demographic and economic trends relating to our industry and similar matters are forward-looking statements. These statements can sometimes be identified by our use of forward-looking words such as “believe,” “may,” “will,” “anticipate,” “estimate,” “expect” or “intend.” We cannot promise you that our expectations in such forward-looking statements will turn out to be correct. Our actual results could be materially different from our expectations because of various factors, including the factors discussed under “Risk Factors” in this report.

ii

Table of Contents

PART I

Some of the information contained in this report concerning the markets and industry in which we operate is derived from publicly available information and from industry sources. Although we believe that this publicly available information and the information provided by these industry sources are reliable, we have not independently verified the accuracy of any of this information.

General

Trex Company, Inc. (the “Company”), founded as a Delaware corporation in 1998, is the world’s largest manufacturer of wood-alternative decking and railing products, which are marketed under the brand name Trex^®. Our principal executive offices are located at 160 Exeter Drive, Winchester, Virginia 22603, and our telephone number at that address is (540) 542-6300.

Products

We offer a comprehensive set of aesthetically durable, low maintenance product offerings in the decking, railing, porch, fencing, trim and steel deck framing categories. We believe that the range and variety of our product offerings allow consumers to design much of their outdoor living space using Trex brand products. The majority of our products are made in a proprietary process that combines waste wood fibers and reclaimed polyethylene. Our products are provided in a wide selection of popular sizes and lengths and are available with several finishes and/or numerous colors.

Decking. We market our decking products under a number of brand names. Our principal brand names for decking are:

We also have Trex Hideaway^®, which is a hidden fastening system for specially grooved boards.

On December 31, 2013, we discontinued the manufacture of Trex Accents, which we do not believe will have a material impact on our results of operations or cash flow.

Railing. Our railing products are Trex Transcend Railing, Trex Designer Series Railing^®, Trex Select Railing, and Trex Reveal^® aluminum railing. Trex Transcend Railing is available in the colors of Trex Transcend decking and finishes that make it appropriate for use with Trex decking products as well as other decking materials, which we believe will enhance the sales prospects of our railing business. Our Designer Series Railing system consists of a decorative top and bottom rail, refined balusters, our Trex RailPost™, and post caps and skirts. Trex Select Railing, which is white, is for consumers who desire a simple clean finished look for their deck. Trex Reveal aluminum railing, which is available in three colors, is for consumers who want a sleek, contemporary aesthetic look.

On December 31, 2013, we discontinued the manufacture of Trex Designer Series Railing, which we do not believe will have a material impact on our results of operations or cash flow.

Porch. Our Trex Transcend Porch Flooring and Railing System is an integrated system of porch components and accessories.

Fencing. We offer our Trex Seclusions^® fencing product through two specialty distributors. This product consists of structural posts, bottom rail, pickets, top rail and decorative post caps.

1

Table of Contents

Trim. Our TrexTrim™ product is a low maintenance cellular PVC residential exterior trim product that offers exceptional workability, durability, visual appeal and a low level of required maintenance.

Miscellaneous. We offer a steel deck framing system called Trex Elevations^®. We also offer a line of energy-efficient LED dimmable deck lighting, which is designed for use on posts, floors and steps, called Trex DeckLighting™. The line includes a post cap light, deck rail light, riser light and a recessed deck light.

We are a licensor in a number of licensing agreements with third parties to manufacture and sell products under the Trex trademark. For 2013, our licensed products are:

Trex products offer a number of significant aesthetic advantages over wood while eliminating many of wood’s major functional disadvantages, which include warping, splitting and other damage from moisture. Our products require no staining, are resistant to moisture damage, provide a splinter-free surface and need no chemical treatment against rot or insect infestation. These features eliminate most of the on-going maintenance requirements for a wood deck and make Trex products less costly than wood over the life of the deck. Like wood, Trex products are slip-resistant (even when wet) and are less vulnerable to damage from ultraviolet rays. Special characteristics (including resistance to splitting, the ability to bend, and ease and consistency of machining and finishing) facilitate deck, railing, fencing and trim installation, reduce contractor call-backs and afford customers a wide range of design options. Trex decking products do not have the tensile strength of wood and, as a result, are not used as primary structural members in posts, beams or columns used in a deck’s substructure. However, Trex does offer the Trex Elevations steel deck framing system.

We have received product building code listings from the major U.S. and Canadian building code listing agencies for both our decking and railing systems. Our listings facilitate the acquisition of building permits by deck builders and promote consumer and industry acceptance of our products as an alternative to wood in decking. In addition, Trex Seclusions privacy fencing has passed the Miami/Dade County wind load testing, a widely regarded standard for assessing a fencing product’s performance under extreme environmental conditions.

Growth Strategies

Our long-term goal is to perpetuate our position as the leading producer of branded superior wood-alternative outdoor living products by increasing our market share and expanding into new product categories and geographic markets. To attain this goal, we intend to employ the following long-term strategies:

2

Table of Contents

Customers and Distribution

We distribute and/or sell our products as follows:

Wholesale Distributors/Retail Lumber Dealers. In 2013, we generated most of our sales through our wholesale distribution network by selling Trex products to wholesale distributors, who in turn, marketed our products to retail lumber outlets. These retail dealers sell to both homeowners and contractors, but they emphasize sales to professional contractors, remodelers and homebuilders. Contractor-installed decks generally are larger installations with professional craftsmanship. Our retail dealers generally provide sales personnel trained in Trex products, contractor training, inventory commitment and point-of-sale display support.

We believe that attracting wholesale distributors, who are committed to our products and marketing approach and can effectively sell higher value products to contractor-oriented lumber yards and other retail outlets, is important to our future growth. Our distributors are able to provide value-added service in marketing our products because they sell premium wood decking products and other innovative building materials that typically require product training and personal selling efforts. We typically appoint a distributor on a non-exclusive basis to distribute Trex products within a specified area. The distributor generally purchases our products at prices in effect at the time we ship the product to the distributor. Based on our 2013 net sales, sales to one of our distributors, Boise Cascade, exceeded 10% of our net sales.

Home Depot and Lowe’s. We sell our products through Home Depot and Lowe’s stores. Home Depot and Lowe’s purchase products directly from us for stocking on their shelves. They also purchase product through our wholesale distributors for special orders placed by consumers. Although Home Depot and Lowe’s serve the contractor market, the largest part of their sales are to “do-it-yourself” homeowner customers that shop for their materials at Home Depot and Lowe’s stores rather than at retail lumber dealers. We believe that brand exposure through Home Depot and Lowe’s distribution promotes consumer acceptance and generates sales to contractors that purchase from independent dealers.

Manufacturing Process

We have manufacturing facilities in Winchester, Virginia and Fernley, Nevada, which had floor space of approximately 455,000 square feet and 250,000 square feet, respectively, at December 31, 2013. In September 2007, we suspended operations at our Olive Branch, Mississippi facility and consolidated all of our manufacturing operations into our Winchester and Fernley sites.

3

Table of Contents

Trex products are primarily manufactured from waste wood fiber and reclaimed polyethylene, which we sometimes refer to as “PE material” in this report. Our primary manufacturing process involves mixing wood particles with plastic, heating and finally extruding, or forcing, the highly viscous and abrasive material through a profile die. We have many proprietary and skill-based advantages in this process.

Production of a non-wood decking alternative such as ours requires significant capital investment, special process expertise and time to develop. We have continuously invested the capital necessary to expand our manufacturing capacity and improve our manufacturing processes. We have also broadened the range of raw materials that we can use to produce a consistent and high-quality finished product. We maintain research and development operations in the Trex Technical Center adjacent to our Winchester, Virginia manufacturing facilities. In connection with our building code listings, we maintain a quality control testing program that is monitored by an independent inspection agency.

We utilize Six Sigma practices and Standard Lean Manufacturing methodology within our plant operations. We also incorporate the use of these tools throughout our Company in the planning and execution of those projects that are the most important to our success.

Research and Development

Our research and development efforts focus on innovation and developing new products, lowering the cost of manufacturing our existing products and redesigning existing product lines to increase efficiency and enhance performance. For the years ended December 31, 2013, 2012, and 2011, research and development costs were $2.9 million, $2.9 million, and $2.5 million, respectively, and have been included in “Selling, general and administrative expenses” in the accompanying consolidated statements of comprehensive income.

Suppliers

The production of most of our products requires the supply of waste wood fiber and PE material.

We fulfill requirements for raw materials under both purchase orders and supply contracts. In the year ended December 31, 2013, we purchased substantially all of our waste wood fiber requirements under purchase orders, which do not involve long-term supply commitments. Substantially all of our PE material purchases are under short-term supply contracts that average approximately two years, for which pricing is negotiated as needed.

Waste Wood Fiber. Woodworking plants or mills are our preferred suppliers of waste wood fiber because the waste wood fiber produced by these operations contains little contamination and is low in moisture. These facilities generate waste wood fiber as a byproduct of their manufacturing operations.

If the waste wood fiber meets our specifications, our waste wood fiber supply agreements generally require us to purchase at least a specified minimum and at most a specified maximum amount of waste wood fiber each year. Depending on our needs, the amount of waste wood fiber that we actually purchase within the specified range under any supply agreement may vary significantly from year to year.

PE Material. The PE material we consumed in 2013 was primarily composed of recovered plastic film and plastic bags. Approximately two billion pounds of polyethylene resin are used in the manufacture of stretch film and plastic bags in the United States each year. We will continue to seek to meet our future needs for plastic from the expansion of our existing supply sources and the development of new sources, including post-industrial waste and plastic coatings. We believe our use of multiple sources provides us with a cost advantage and facilitates an environmentally responsible approach to our procurement of PE material.

Our ability to source and use a wide variety of PE material is important to our cost strategy. We maintain this ability through the continued expansion of our plastic reprocessing operations in combination with the advancement of our proprietary material preparation and extrusion processes.

4

Table of Contents

Third-Party Manufacturing. We outsource the production of certain products to third-party manufacturers under supply contracts that commit us to purchase minimum levels for each year extending through 2015. We have purchase commitments under the third-party manufacturing contracts of $4.4 million and $1.9 million for the years ending December 31, 2014 and 2015, respectively.

Competition

In decking, we compete with wood and other manufacturers of wood alternative decking products. Many of the conventional lumber suppliers with which we compete have established ties to the building and construction industry and have well-accepted products. In railing, we compete with wood and other manufacturers of composite, non-wood and plastic products, as well as with railings using metal, glass, vinyl and other materials. In privacy fencing, we compete with wood, vinyl and other manufacturers of composites. In trim, we compete against wood, engineered wood, fiber cement, and other manufacturers of cellular PVC and similar plastic products.

Our primary competition consists of wood products, which constituted a substantial majority of 2013 decking and railing sales, as measured by linear feet of lumber. A majority of the lumber used in wooden decks is pressure-treated lumber. Southern yellow pine and fir have a porosity that readily allows the chemicals used in the pressure treating process to be absorbed. The same porosity makes southern yellow pine susceptible to absorbing moisture, which causes the lumber to warp, crack, splinter and expel fasteners. In addition to pine and fir, other segments of wood material for decking include redwood, cedar and tropical hardwoods, such as ipe, teak and mahogany. These products are often significantly more expensive than pressure-treated lumber, but do not eliminate many of the disadvantages of other wood products.

Industry studies indicate that we have the leading market share of the wood-plastic composite / PVC segment of the decking and railing market. Our principal competitors include Advanced Environmental Recycling Technologies, Inc., Azek Building Products, Inc. and Fiber Composites, LLC.

Our ability to compete depends, in part, on a number of factors outside our control, including the ability of our competitors to develop new non-wood decking and railing alternatives that are competitive with our products. We believe that the principal competitive factors in the decking and railing market include product quality, price, aesthetics, maintenance cost, distribution and brand strength. We believe we compete favorably with respect to these factors. We believe that our products offer aesthetic and cost advantages over the life of a deck when compared to other types of decking and railing materials. Although a contractor-installed deck built with Trex products in 2013 using a pressure-treated wood substructure generally costs more than a deck made entirely from pressure-treated wood, Trex products eliminate many of the on-going maintenance required for a pressure-treated deck and are, therefore, less costly over the life of the deck. We believe that our manufacturing process and utilization of relatively low-cost raw material sources provide us with a competitive cost advantage relative to other wood/plastic composite and 100% plastic decking products. The scale of our operations also confers cost efficiencies in manufacturing, sales and marketing.

Seasonality

Our net sales, gross profit and income from operations have historically varied from quarter to quarter. Such variations are often attributable to seasonal trends in the demand for Trex. We have historically experienced lower net sales during the fourth quarter because holidays and adverse weather conditions in certain regions reduce the level of home improvement and construction activity.

Government Regulation

We are subject to federal, state and local environmental regulation. The emissions of particulates and other substances from our manufacturing facilities must meet federal and state air quality standards implemented through air permits issued to us by the Department of Environmental Quality of the Commonwealth of Virginia,

5

Table of Contents

the Division of Environmental Protection of Nevada’s Department of Conservation and Natural Resources and the Mississippi Department of Environmental Quality. Our facilities are regulated by federal and state laws governing the disposal of solid waste and by state and local permits and requirements with respect to wastewater and storm water discharge. Compliance with environmental laws and regulations has not had a material adverse effect on our business, operating results or financial condition.

Our operations also are subject to work place safety regulation by the U.S. Occupational Safety and Health Administration, the Commonwealth of Virginia, the State of Nevada and the State of Mississippi. Our compliance efforts include safety awareness and training programs for our production and maintenance employees.

Intellectual Property

Our success depends, in part, upon our intellectual property rights relating to our products, production processes and other operations. We rely upon a combination of trade secret, nondisclosure and other contractual arrangements, and patent, copyright and trademark laws, to protect our proprietary rights. We have made substantial investments in manufacturing process improvements that have enabled us to increase manufacturing line production rates, facilitate our development of new products, and produce improvements in our existing products’ dimensional consistency, surface texture and color uniformity.

Intellectual property rights may be challenged by third parties and may not exclude competitors from using the same or similar technologies, brands or works. We seek to secure effective rights for our intellectual property, but cannot provide assurance that third parties will not successfully challenge, or avoid infringing, our intellectual property rights.

We have obtained two patents for complementary methods of preparing the raw materials for the manufacturing phase of production, one patent on an apparatus for implementing one of the methods, and one patent on a tool for use with the installation of the decking board. We intend to maintain our existing patents in effect until they expire, beginning in 2015, as well as to seek additional patents as we consider appropriate.

We consider our trademarks to be of material importance to our business plans. The U.S. Patent and Trademark Office has granted us federal registrations for many of our trademarks. Federal registration of trademarks is effective for as long as we continue to use the trademarks and renew their registrations. We do not generally register any of our copyrights with the U.S. Copyright Office, but rely on the protection afforded to such copyrights by the U.S. Copyright Act. This law provides protection to authors of original works, whether published or unpublished, and whether registered or unregistered. We enter into confidentiality agreements with our employees and limit access to and distribution of our proprietary information. If it is necessary to disclose proprietary information to third parties for business reasons, we require that such third parties sign a confidentiality agreement prior to any disclosure.

Employees

At December 31, 2013, we had approximately 590 full-time employees, approximately 445 of whom were employed in our manufacturing operations. Our employees are not covered by collective bargaining agreements. We believe that our relationships with our employees are favorable.

Web Sites and Additional Information

The SEC maintains an Internet web site at www.sec.gov that contains reports, proxy statements, and other information regarding our Company. In addition, we maintain an Internet corporate web site at www.trex.com. We make available through our web site our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports, as soon as reasonably practicable after we electronically file or furnish such material with or to the SEC. We do not charge any fees to view, print or access these reports on our web site. The contents of our web site are not a part of this report.

6

Table of Contents

Executive Officers and Directors

The table below sets forth information concerning our executive officers and directors as of February 15, 2014.

Ronald W. Kaplan has served as Chairman, President and Chief Executive Officer of the Company since May 2010. From January 2008 to May 2010, Mr. Kaplan served as a director and President and Chief Executive Officer of the Company. From February 2006 through December 2007, Mr. Kaplan served as Chief Executive Officer of Continental Global Group, Inc., a manufacturer of bulk material handling systems. For 26 years prior to this, Mr. Kaplan was employed by Harsco Corporation, an international industrial services and products company, at which he served in a number of capacities, including as Senior Vice President-Operations, and, from 1994 through 2005, as President of Harsco’s Gas Technologies Group, which manufactures containment and control equipment for the global gas industry. Mr. Kaplan received a B.A. degree in economics from Alfred University and an M.B.A. degree from the Wharton School of Business, University of Pennsylvania.

James E. Cline has served as Senior Vice President and Chief Financial Officer of the Company since August 2013 and as Vice President and Chief Financial Officer between March 2008 and July 2013. Mr. Cline served from July 2005 through December 2007 as the President of Harsco GasServ, a subsidiary of Harsco Corporation and a manufacturer of containment and control equipment for the global gas industry. From January 2008 through February 2008, in connection with the purchase of Harsco GasServ by Taylor-Wharton International LLC, which is owned by Windpoint Partners Company, Mr. Cline served as a consultant to the buyers by providing transition management and financial services. From April 1994 through June 2005, Mr. Cline served as the Vice President and Controller of Harsco GasServ. Mr. Cline served in various capacities with Huffy Corporation from June 1976 to February 1994, including as the Director of Finance of its True Temper Hardware subsidiary, a manufacturer of lawn care and construction products with nine manufacturing locations in the United States, Canada and Ireland. Mr. Cline received a B.S.B.A. degree in accounting from Bowling Green State University.

F. Timothy Reese has served as Senior Vice President, Operations of the Company since August 2013 and as Vice President, Operations between February 2008 and July 2013. From March 2007 through January 2008, Mr. Reese served as Operations Director for the Americas Region of DuPont Teijin Films, a DuPont Teijin Films U.S. Limited Partnership and producer of polyester films. From 1979 to March 2007, Mr. Reese served in various positions with DuPont, including Global Director, Business and Integrated Operations, DuPont High Performance Films, from November 1995 through November 1998; Director/Plant Manager, Global Operations, Cyrel^® Packaging Graphics Products, from December 1998 through May 2000; Director, Global Operations and Six Sigma Champion, Cyrel^® Packaging Graphics Products, from June 2000 through February 2001; and Director/Plant Manager in multiple assignments from March 2001 through February 2007, including in Corporate Operations, Human Resources and DuPont Chemical Solutions Enterprise. Mr. Reese served in the U.S. Navy and received a B.S. in ocean engineering with an emphasis on mechanical engineering from the U.S. Naval Academy.

7

Table of Contents

Christopher P. Gerhard has served as Vice President, Sales of the Company since June 2012. From May 2006 through June 2012, Mr. Gerhard served in a number of capacities at the Company, most recently as Director, Field Sales. From 2002 to May 2006, Mr. Gerhard served in various capacities with Kraft Foods North America, a manufacturer of food and beverages, most recently as Southeast Region Customer Category Manager. Mr. Gerhard received a B.A. in English from the University of North Carolina—Greensboro, and a Masters in Science from Ohio University.

William R. Gupp has served as Chief Administrative Officer, General Counsel and Secretary of the Company since October 2009. From May 2001 to October 2009, Mr. Gupp served as Vice President and General Counsel of the Company. From March 1993 to May 2001, Mr. Gupp was employed by Harsco Corporation, an international industrial services and products company, most recently as Senior Counsel and Director-Corporate Development. From August 1985 to March 1993, Mr. Gupp was employed by the law firm of Harter, Secrest & Emery. Mr. Gupp received a B.S. degree in accounting from Syracuse University and a J.D. from the University of Pennsylvania Law School.

Adam D. Zambanini has served as Vice President, Marketing of the Company since January 2011. From September 2005 through December 2010, Mr. Zambanini served in a number of capacities at the Company, most recently as Director, Marketing. From January 2000 through September 2005, Mr. Zambanini was employed by Rubbermaid Commercial Products, most recently as Product Manager. Mr. Zambanini received a B.S. in mechanical engineering from Penn State University, and a M.B.A. degree from Averett University.

Paul A. Brunner has served as a director of the Company since February 2003. Mr. Brunner is President and Chief Executive Officer of Spring Capital Inc., a merchant bank, which he founded in 1985. From 1982 to 1985, Mr. Brunner served as President and Chief Executive Officer of U.S. Operations of Asea-Brown Boveri, a multi-national Swiss manufacturer of high technology products. In 1967, he joined Crouse Hinds Company, a manufacturer of electronics and electronic equipment, and through 1982 held various positions with that company, including President and Chief Operating Officer, Executive Vice President of Operations, Vice President of Finance and Treasurer, and Director of Mergers and Acquisitions. Mr. Brunner served as a director of Johnson Controls, Inc. from 1983 through 2007, and as Chairman of its Audit Committee from 1989 to 2005. From 1959 to 1967, he worked for Coopers & Lybrand, an international accounting firm, as an audit supervisor. Mr. Brunner is a Certified Public Accountant. He received a B.S. degree in accounting from the University of Buenos Aires and an M.B.A. degree in management from Syracuse University.

Michael F. Golden has served as a director of the Company since February 2013. Mr. Golden currently serves as Co-Vice Chairman of the Board of Directors of Smith and Wesson Holding Corporation, a manufacturer of firearms and firearms-related products and accessories, and served as President and Chief Executive Officer of such company from December 2004 until his retirement in September 2011. Mr. Golden was employed in various executive positions with the Kohler Company, which manufactures kitchen and bath plumbing fixtures, furniture, tile, engines, and generators, and operates resorts, from February 2002 until December 2004, with his most recent position being the President of its Cabinetry Division. Mr. Golden was the President of Sales for the Industrial/Construction Group of the Stanley Works Company, which manufactures tools and hardware, from 1999 until 2002; Vice President of Sales for Kohler’s North American Plumbing Group from 1996 until 1998; and Vice President, Sales and Marketing for a division of The Black & Decker Corporation, which manufactures tools and hardware, where he was employed from 1981 until 1996. Mr. Golden also serves on the Board of Directors of Quest Resources Holding Company. Mr. Golden received a B.S. degree in Marketing from Pennsylvania State University and a M.B.A. degree from Emory University.

Jay M. Gratz has served as a director of the Company since February 2007, and Lead Independent Director since May 2010. Mr. Gratz has served as the Chief Financial Officer of VisTracks, Inc., an application enabling platform service provider, since March 2010, and a director of such company since April 2010. Mr. Gratz was a partner in Tatum LLC, a national executive services and consulting firm that focuses on the needs of the Office of the CFO between February 2010 and March 2010. From October 2007 through February 2010, Mr. Gratz was

8

Table of Contents

an independent consultant. From 1999 through October 2007, Mr. Gratz served as Executive Vice President and Chief Financial Officer of Ryerson Inc., a metals processor and distributor, and as President of Ryerson Coil Processing Division from November 2001 until October 2007. Mr. Gratz served as Vice President and Chief Financial Officer of Inland Steel Industries, a steel company, from 1994 through 1998, and served in various other positions, including Vice President of Finance, within that company since 1975. Mr. Gratz is a Certified Public Accountant. He received a B.A. degree in economics from State University of New York in Buffalo and an M.B.A. degree from Northwestern University Kellogg Graduate School of Management.

Frank H. Merlotti, Jr. has served as a director of the Company since February 2006. Mr. Merlotti has served as President of the Coalesse business unit of Steelcase, Inc., a manufacturer of office furniture and furniture systems, since October 2006, and served as President of Steelcase North America from September 2002 through September 2006. Mr. Merlotti served as President and Chief Executive Officer of G&T Industries, a manufacturer and distributor of fabricated foam and soft-surface materials for the marine, office furniture and commercial building industries, from August 1999 to September 2002. From 1991 through 1999, Mr. Merlotti served as President and Chief Executive Officer of Metropolitan Furniture Company, a Steelcase Design Partnership company. From 1985 through 1999, Mr. Merlotti served as General Manager of the Business Furniture Division of G&T Industries.

Richard E. Posey has served as a director of the company since May 2009. He served as President and Chief Executive Officer of Moen Incorporated, a manufacturer of faucets, for six years before retiring in 2007. Prior to joining Moen, Mr. Posey was President and Chief Executive Officer of Hamilton Beach / Proctor Silex, Inc., a manufacturer of small kitchen appliances, for five years. Mr. Posey began his career at S.C. Johnson & Son, a supplier of cleaning and other household products, where for 22 years he served in a series of increasingly responsible management positions, both overseas and in the U.S., culminating with Executive Vice President, Consumer Products, North America. Mr. Posey is a Founding Trustee, Virginia Commonwealth University School of Engineering Foundation. He received a B.A. degree in English from The University of Southern California and an M.B.A. degree from The University of Michigan.

Patricia B. Robinson has served as a director of the Company since November 2000. Ms. Robinson has been an independent consultant since 1999. From 1977 to 1998, Ms. Robinson served in a variety of positions with Mead Corporation, a forest products company, including President of Mead School and Office Products, Vice President of Corporate Strategy and Planning, President of Gilbert Paper, Plant Manager of a specialty machinery facility and Product Manager for new packaging product introductions. Ms. Robinson received a B.A. degree in economics from Duke University and an M.B.A. degree from the Darden School at the University of Virginia.

Our business is subject to a number of risks, including the following:

We may not be able to grow unless we increase market acceptance of our products, compete effectively and develop new products and applications.

Our primary competition consists of wood products, which constitute a substantial majority of decking, railing, porches, fencing, trim and deck framing sales. Since wood/plastic composite products were introduced to the market in the early 1990’s, their market acceptance has increased, but during the last few years, the rate of conversion from purchasing wood products to purchasing wood/plastic composite products has slowed. Our ability to grow will depend in part on our success in continuing to convert demand for wood in decking, railing, fencing, trim and deck framing applications into a demand for Trex products. To increase our market share, we must overcome:

9

Table of Contents

We must also compete with a number of companies in the wood/plastic composites segment of the decking, railing, fencing and trim markets and with wood producers that currently have more production capacity than is required to meet the demand for such products. Our failure to compete successfully in such markets could have a material adverse effect on our ability to replace wood or increase the market share of wood/plastic composites compared to wood. Many of the conventional lumber suppliers with which we compete have established ties to the building and construction industry and have well-accepted products. Our ability to compete depends, in part, upon a number of factors outside our control, including the ability of competitors to develop new non-wood alternatives that are more competitive with Trex products.

In addition to the above, substantially all of our revenues are derived from sales of our proprietary wood/plastic composite material. Although we have developed, and continue to develop, new products made from other materials, if we should experience significant problems, real or perceived, with product quality or acceptance of the Trex wood/polyethylene composite material, our lack of product diversification could have a significant adverse impact on our net sales levels.

Our prospects for sales growth and profitability may be adversely affected if we fail to maintain product quality and product performance at an acceptable cost.

We will be able to expand our net sales and to sustain and enhance profitable operations only if we succeed in maintaining the quality and performance of our products. If we should not be able to produce high-quality products at standard manufacturing rates and yields, unit costs may be higher. A lack of product performance would negatively affect our profitability by impeding acceptance of our products in the marketplace and by leading to higher product replacement and consumer relations expenses. In recent periods, we have experienced significant warranty expenses related to material produced at our Nevada facility prior to 2007 that exhibits surface flaking. We have limited our financial exposure by agreeing to settle a nationwide class action lawsuit which fixes our obligation in each claim to provide replacement product and provide a partial labor reimbursement. However, because the establishment of reserves is an inherently uncertain process involving estimates of the number of future claims, our ultimate losses may differ from our warranty reserve. Increases we have made to the warranty reserve and payments for related claims in recent years have had a material adverse effect on our profitability and cash flows. Future increases to the warranty reserve could have a material adverse effect on our profitability and cash flows should we make such increases and pay such claims.

In addition, our products are used outdoors and are sometimes subject to heavy use and harsh exposure to the environment. Although our Limited Warranty excludes any conditions attributable to “any act of God (such as flooding, hurricane, earthquake, lightning, etc., ), environmental condition (such as air pollution, mold, mildew, etc.), staining from foreign substances (such as dirt, grease, oil, etc.), or normal weathering (defined as exposure to sunlight, weather and atmosphere which may cause any colored surface to gradually fade, chalk, or accumulate dirt or stains”), to the extent that our products are affected in any way, this may lead to an increased risk of product liability claims or litigation.

A number of class action lawsuits based upon mold growth, color fading and color variation on our products have been brought against us. (See Part I, Item 3, Legal Proceedings, for a discussion of the status of these lawsuits.) These claims, as well as other potential claims, are a potential financial exposure to us and could cause

10

Table of Contents

adverse publicity, which in turn could result in a loss of consumer confidence in our products and also reduce our sales. Product quality claims could increase our expenses and have a material adverse effect on demand for our products and, consequently, reduce our net sales, net income and liquidity.

Our business is subject to risks in obtaining the raw materials we use at acceptable prices.

The production of our product requires substantial amounts of wood fiber and PE material. Our business strategy is to create a substantial cost advantage over our competitors by using recycled plastic and reclaimed wood. Our business could suffer from the termination of significant sources of raw materials, the payment of higher prices for raw materials or from the failure to obtain sufficient additional raw materials to meet planned increases in production. Our ability to obtain adequate supplies of PE material depends on our success in developing new sources that meet our quality requirements, maintaining favorable relationships with suppliers and managing the collection of supplies from geographically dispersed locations.

We sell to certain customers that account for a significant portion of our sales, and the loss of one or more of these customers could have an adverse effect on our business.

A limited number of customers account for a significant percentage of our sales. Specifically, sales through our 15 largest customers each year accounted for approximately 89% of gross sales during fiscal year 2013, 90% during fiscal year 2012 and 89% during fiscal year 2011.

We expect that a significant portion of our sales will continue to be sold through a small number of customers, and certain customers will continue to account for a significant portion of our sales. The loss of a significant customer could have a negative impact on our business, financial condition and results of operations.

We have limited ability to control or project inventory build-ups in our distribution channel that can negatively affect our sales in subsequent periods.

The dynamic nature of our industry can result in substantial fluctuations in inventory levels of Trex products carried in our two-step distribution channel. We have limited ability to control or precisely project inventory build-ups, which can adversely affect our net sales levels in subsequent periods. We make the substantial majority of our sales to wholesale distributors, who, in turn, sell our products to local lumber yards. Because of the seasonal nature of the demand for decking, railing, fencing and trim, our distribution channel partners must forecast demand for our products, place orders for the products, and maintain Trex product inventories in advance of the prime deck-building season, which generally occurs in our late first through third fiscal quarters. Accordingly, our results for the second and third fiscal quarters are difficult to predict and past performance will not necessarily indicate future performance. Inventory levels respond to a number of changing conditions in our industry, including product price increases resulting from escalating raw materials costs, increases in the number of competitive producers and in the production capacity of those competitors, the rapid pace of product introduction and innovation, changes in the levels of home-building and remodeling expenditures, and the cost and availability of credit.

The demand for our products is affected by adverse weather conditions.

Our products are generally purchased shortly before installation and used in outdoor environments. As a result, there is a correlation between the amount of product we sell and the weather conditions around the time they are to be installed. Weather conditions, such as very high or low temperatures, intense and prolonged precipitation, hurricanes, floods, and regional fires in the regions we sell our products interfere with ordinary construction, delay projects and can even lead to cessation of certain construction involving our products.

11

Table of Contents

Since weather conditions and seasonal cycles cannot be accurately predicted, adverse weather conditions may shift our sales to subsequent reporting periods, or may also reduce overall sales given the limited decking season in many locations. Prolonged adverse weather conditions could have a negative impact on our financial statements.

The demand for our products is influenced by general economic conditions and could be adversely affected by economic downturns.

The demand for our products is correlated to changes in the health of the economy in general, and the level of activity in home improvements and, to a much lesser extent, new home construction. These activity levels, in turn, are affected by such factors as home equity values, consumer spending habits, employment, interest rates and inflation. Market conditions in the housing industry slowed significantly in 2008 and subsequent periods thereafter, particularly in new home construction. Home equity values in many markets that decreased significantly during those time periods have not recovered or have only begun to recover. This devaluation in home equity values has adversely affected the availability of home equity withdrawals, which have resulted in decreased home improvement spending. Beginning in 2008, the economy has suffered an unprecedented downturn. We cannot predict when the economy and the home remodeling and new home construction environments will fully recover. Any continued economic downturn could reduce consumer income or equity capital available for spending on discretionary items such as decking, railing, porches, fencing and trim, which could adversely affect the demand for our products.

We have significant capital invested in property, plant and equipment that may become obsolete or impaired and result in a charge to our earnings.

At December 31, 2013, we had $100.8 million of net property, plant and equipment. The improvement we seek to make to our manufacturing processes sometimes involves the implementation of new technology and replacement of equipment at our manufacturing facilities, which may result in charges to our earnings if the existing equipment is not fully depreciated. In September 2007, we suspended operations at our Olive Branch facility and consolidated all of our manufacturing operations into our Winchester and Fernley sites. In September 2009, we recorded a pre-tax impairment charge of $23.3 million related to the long-lived assets held at the facility. Of our net property, plant and equipment at December 31, 2013, approximately $6.9 million is located at our Olive Branch, Mississippi manufacturing facility. We do not currently anticipate further impairments on the remaining assets. However, changes in the expected cash flows related to the facility could result in additional impairment charges and reduced earnings in future periods.

Our level of indebtedness, and ability to continue to obtain financing on favorable terms, could adversely affect our financial health and ability to compete.

As of December 31, 2013, we had no outstanding indebtedness. Our indebtedness has been substantially reduced from its level on December 31, 2011 due to our repayment on July 1, 2012 of the remaining $91.9 million principal balance on our 6% Convertible Senior Subordinated Notes, which matured as of such date. It is foreseeable that we will need to borrow on our current senior secured credit facility in 2014 for working capital purposes. In addition, we may borrow money in the event we elect to pursue an acquisition or other transaction. Accordingly, our future level of indebtedness could have important consequences. For example, it may:

12

Table of Contents

In addition, our senior secured credit facility imposes operating and financial restrictions that may limit our discretion on some business matters, which could make it more difficult for us to expand, finance our operations and engage in other business activities that may be in our interest. These restrictions may limit our ability to:

We may incur indebtedness in addition to our current indebtedness. Any additional indebtedness we may incur in the future could subject us to similar or even more restrictive conditions.

Our ability to make future principal and interest payments, borrow and repay amounts under our revolving credit facility and continue to comply with our loan covenants will depend primarily on our ability to generate sufficient cash flow from operations. Our failure to comply with our loan covenants might cause our lenders to accelerate our repayment obligations under our credit facility, which may be declared payable immediately based on a default. Our ability to borrow under our revolving credit facility is tied to a borrowing base consisting of certain accounts receivables, inventories, machinery and equipment and real estate. To remain in compliance with our credit facility, we must maintain specified financial ratios based on our levels of debt, capital, net worth, fixed charges, and earnings (excluding extraordinary gains and extraordinary non-cash losses) before interest, taxes, depreciation and amortization, all of which are subject to the risks of our business.

None.

We lease our corporate headquarters in Winchester, Virginia, which consists of approximately 32,000 square feet of office space, under a lease that expires in March 2020. In 2005, in anticipation of relocating our corporate headquarters, we entered into an agreement to lease approximately 55,000 square feet of office space in Dulles, Virginia. The lease expires in mid-2019. Subsequently, we reconsidered our decision to relocate our corporate headquarters and decided not to move. We have executed subleases for approximately 42,000 square feet of the leased space and are currently marketing the remaining portion of the space to find a suitable tenant. The terms of the existing subleases expire in years 2014 to 2019. For a description of our financial reporting in connection with the Dulles lease agreement, see Note 12 to our consolidated financial statements appearing elsewhere in this report.

13

Table of Contents

We own approximately 74 contiguous acres of land in Winchester, Virginia and the buildings on this land. The site includes our manufacturing facilities, which contain approximately 455,000 square feet of space, and our research and development technical facility. We own the land and the manufacturing facility on the Fernley, Nevada site, which contains approximately 250,000 square feet of manufacturing space. Our Fernley site is located on approximately 37 acres, which includes outside open storage. We own approximately 102 acres of land in Olive Branch, Mississippi and the buildings on this land. The site contains four buildings with approximately 200,000 square feet for manufacturing and raw material handling operations. In September 2007, we suspended operations at our Olive Branch facility and consolidated all of our manufacturing operations into our Winchester and Fernley sites. Our facilities provide adequate capacity for current and anticipated future consumer demand.

We lease a total of approximately 1.0 million square feet of storage warehouse space under leases with expiration dates ranging from 2014 to 2025. For information about these leases, see Note 9 to our consolidated financial statements appearing elsewhere in this report.

The equipment and machinery we use in our operations consist principally of plastic and wood conveying and processing equipment. We own all of our manufacturing equipment. We lease forklift equipment at our facilities under operating leases.

We regularly evaluate our various facilities and equipment and make capital investments where necessary. In 2013, we spent a total of $13.1 million on capital expenditures, primarily related to new products and to make process and productivity improvements. We estimate that our capital expenditures in 2014 will be in approximately $15 million. We expect to use these expenditures principally to support cost reduction initiatives, new product launches in current and adjacent categories and general business support.

On January 19, 2009, a purported class action case was commenced against the Company in the Superior Court of California, Santa Cruz County, by the lead law firm of Lieff, Cabraser, Heimann & Bernstein, LLP and certain other law firms (the “Lieff Cabraser Group”) on behalf of Eric Ross and Bradley S. Hureth and similarly situated plaintiffs. These plaintiffs generally alleged certain defects in the Company’s products, and that the Company failed to provide adequate remedies for defective products. On February 13, 2009, the Company removed this case to the United States District Court, Northern District of California. On January 21, 2009, a purported class action case was commenced against the Company in the United States District Court, Western District of Washington by the law firm of Hagens Berman Sobol Shapiro LLP (“Hagens Berman”) on behalf of Mark Okano and similarly situated plaintiffs, generally alleging certain product defects in the Company’s products, and that the Company failed to provide adequate remedies for defective products. This case was transferred by the Washington Court to the California Court as a related case to the Lieff Cabraser Group’s case.

On July 30, 2009, the U.S. District Court for the Northern District of California preliminarily approved a settlement of the claims of the lawsuit commenced by the Lieff Cabraser Group involving surface flaking of the Company’s product, and on March 15, 2010, it granted final approval of the settlement.

On March 25, 2010, the Lieff Cabraser Group amended its complaint to add claims relating to alleged defects in the Company’s products and alleged misrepresentations relating to mold growth. Hagens Berman alleged similar claims in its original complaint. In its Final Order approving the surface flaking settlement, the District Court consolidated these pending actions relating to the mold claims, and appointed Hagens Berman as lead counsel in this case. On December 3, 2010, Hagens Berman filed an amended consolidated complaint in the United States District Court, Northern District of California relating to the mold growth claims (now on behalf of Dean Mahan and other named plaintiffs).

14

Table of Contents

On December 15, 2010, a purported class action case was commenced against the Company in the United States District Court, Western District of Kentucky, by Cohen & Malad, LLP (“Cohen & Malad”) on behalf of Richard Levin and similarly situated plaintiffs in Kentucky, and on June 13, 2011, a purported class action was commenced against the Company in the Marion Circuit/Superior Court of Indiana by Cohen & Malad on behalf of Ellen Kopetsky and similarly situated plaintiffs in Indiana. On June 28, 2011, the Company removed the Kopetsky case to the United States District Court, Southern District of Indiana. (On September 3, 2013, the two lawsuits commenced by Cohen & Malad were settled.) On August 11, 2011, a purported class action was commenced against the Company in the 50 ^th Circuit Court for the County of Chippewa, Michigan on behalf of Joel and Lori Peffers and similarly situated plaintiffs in Michigan. On August 26, 2011, the Company removed the Peffers case to the United States District Court, Western District of Michigan. On April 4, 2012, a purported class action was commenced against the Company in Superior Court of New Jersey, Essex County by the lead law firm of Stull, Stull & Brody (the “Stull Group”) on behalf of Caryn Borger, M.D. and similarly situated plaintiffs in New Jersey. On May 1, 2012, the Company removed the Borger case to the United States District Court, District of New Jersey. (On December 5, 2013, the lawsuit commenced by the Stull Group was settled.) The plaintiffs in these purported class actions alleged certain defects in the Company’s products and alleged misrepresentations relating to mold growth.

On April 5, 2013, the Company signed a settlement agreement with Hagens Berman that settled the case pending in the United States District Court, Northern District of California on a nationwide basis, and the parties filed for preliminary approval of such settlement (the “nationwide settlement”). The material terms of the nationwide settlement, as amended by an amended settlement agreement signed on September 3, 2013, are as follows:

The settlement agreement provides that the nationwide settlement applies to any Trex first-generation non-shelled composite decking, railing and fencing product purchased between August 1, 2004 and the date of preliminary approval of the nationwide settlement.

On August 27, 2013, the Court entered an Order granting preliminary approval of the settlement agreement, and on December 16, 2013, the Court granted final approval of the settlement. At December 31, 2013, the Company has accrued a $3.2 million liability related to this litigation. It is reasonably possible that the Company may incur costs in excess of the recorded amounts; however, the Company expects that the total net cost to resolve the lawsuit will not exceed approximately $10 million.

The Company has other lawsuits, as well as other claims, pending against it which are ordinary routine litigation and claims incidental to the business. Management has evaluated the merits of these other lawsuits and claims, and believes that their ultimate resolution will not have a material effect on the Company’s consolidated financial condition, results of operations, liquidity or competitive position.

Not applicable.

15

Table of Contents

PART II

Market for Common Stock

Our common stock has been listed on the New York Stock Exchange, or NYSE, since April 8, 1999. Between April 8, 1999 and November 22, 2009, it was listed under the symbol “TWP”. Effective November 23, 2009, the symbol changed to “TREX”. The table below shows the reported high and low sale prices of our common stock for each quarter during 2013 and 2012 as reported by the New York Stock Exchange:

Dividend Policy

We have never paid cash dividends on our common stock. We intend to retain future earnings, if any, to finance the development and expansion of our business and, therefore, do not plan to pay any cash dividends on the common stock in the foreseeable future. Under the terms of our credit agreement, there are restrictions on our ability to pay cash dividends.

16

Table of Contents

Stockholder Return Performance Graph

The following graph and table show the cumulative total stockholder return on Trex Company’s common stock for the last five fiscal years compared to the Russell 2000 Index and the Standard and Poor’s 600 Building Products Index. The graph assumes $100 was invested on December 31, 2008 in (1) Trex Company common stock, (2) the Russell 2000 Index and (3) the S&P 600 Building Products Index, and assumes reinvestment of dividends and market capitalization weighting as of December 31, 2009, 2010, 2011, 2012 and 2013.

Issuer Purchases of Equity Securities

On August 1, 2013, the Board of Directors authorized the repurchase of up to $25 million of our outstanding common stock over a six-month period (the “August 2013 Stock Repurchase Program”). During the three months ended September 30, 2013, we repurchased 561,255 shares for $25.0 million at an average price of $44.54 per share, which completed the authorization under the August 2013 Stock Repurchase Program.

On October 24, 2013, the Board of Directors authorized an additional common stock repurchase program, expiring on February 10, 2014, of up to $30 million of our outstanding common stock (the “October 2013 Stock Repurchase Program”). We made no repurchases under the October 2013 Stock Repurchase Program before it expired.

Other Stockholder Matters

As of February 7, 2014, there were approximately 189 holders of record of our common stock.

In 2013, we submitted to the NYSE in a timely manner the annual certification that our Chief Executive Officer was not aware of any violation by us of the NYSE corporate governance listing standards.

17

Table of Contents

The following table presents selected financial data as of December 31, 2013, 2012, 2011, 2010 and 2009 and for each of the years in the five-year period ended December 31, 2013.

The selected financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes thereto appearing elsewhere in this report.

18

Table of Contents

The Company compensates for these limitations by relying primarily on its GAAP results to evaluate its operating performance and by considering independently the economic effects of the foregoing items that are not reflected in EBITDA. As a result of these limitations, EBITDA should not be considered as an alternative to net income (loss), as calculated in accordance with GAAP, as a measure of operating performance, nor should it be considered as an alternative to cash flows as a measure of liquidity. The following table sets forth, for the years indicated, a reconciliation of EBITDA to net income (loss):

19

Table of Contents

This management’s discussion and analysis contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. All statements regarding our expected financial position and operating results, our business strategy, our financing plans, forecasted demographic and economic trends relating to our industry and similar matters are forward-looking statements. These statements can sometimes be identified by our use of forward-looking words such as “may,” “will,” “anticipate,” “estimate,” “expect,” “intend” or similar expressions. We cannot promise you that our expectations in such forward-looking statements will turn out to be correct. Our actual results could be materially different from our expectations because of various factors, including the factors discussed under “Item 1A. Risk Factors.” These statements are also subject to risks and uncertainties that could cause the Company’s actual operating results to differ materially. Such risks and uncertainties include the extent of market acceptance of the Company’s products; the costs associated with the development and launch of new products and the market acceptance of such new products; the sensitivity of the Company’s business to general economic conditions; the impact of seasonal and weather-related demand fluctuations on inventory levels in the distribution channel and sales of the Company’s products; the Company’s ability to obtain raw materials at acceptable prices; the Company’s ability to maintain product quality and product performance at an acceptable cost; the level of expenses associated with product replacement and consumer relations expenses related to product quality; and the highly competitive markets in which the Company operates.

Overview

General. Trex Company, Inc. is the world’s largest manufacturer of wood-alternative decking and railing products, which are marketed under the brand name Trex^®. We offer a comprehensive set of aesthetically durable, low maintenance product offerings in the decking, railing, porch, fencing, trim and steel deck framing categories. We believe that the range and variety of our product offerings allow consumers to design much of their outdoor living space using Trex brand products.

We have four principal decking products: Trex Transcend^®, Trex Enhance^®, Trex Select^®, and Trex Accents^®; four railing products: Trex Transcend Railing, Trex Designer Series Railing^®, Trex Select Railing, and Trex Reveal^® aluminum railing; a porch product, Trex Transcend Porch Flooring and Railing System; a steel deck framing system, Trex Elevations^®; a fencing product, Trex Seclusions^®; a deck lighting system, Trex DeckLighting™ and a cellular PVC outdoor trim product, TrexTrim™. In addition, we offer Trex Hideaway^®, which is a hidden fastening system for specially grooved boards.

On December 31, 2013, we discontinued the manufacture of Trex Accents and Trex Designer Series Railing, which we do not believe will have a material impact on our results of operations or cash flow.

Highlights related to the fourth quarter and full year 2013 include:

Net Sales. Net sales consist of sales and freight, net of returns and discounts. The level of net sales is principally affected by sales volume and the prices paid for Trex products. Our branding and product differentiation strategy enables us to command premium prices over wood products. Our operating results have

20

Table of Contents

historically varied from quarter to quarter, in part due to seasonal trends in the demand for Trex. We have historically experienced lower net sales during the fourth quarter because holidays and adverse weather conditions in certain regions reduce the level of home improvement and construction activity.

Sales Incentives / Early Buy Program: As part of our normal business practice and consistent with industry practices, we have historically provided our distributors and dealers incentives to build inventory levels before the start of the prime deck-building season to ensure adequate availability of product to meet anticipated seasonal consumer demand and to enable production planning. These incentives, which together we reference as our “early buy program,” include payment discounts and favorable payment terms. In addition, from time to time we may offer price discounts or volume rebates on specified products and other incentives based on increases in purchases as part of specific promotional programs.

We launched our early buy program for the 2014 decking season in December 2013. The timing and terms of the 2014 program are generally consistent with the timing and terms of the 2013 program launched in December 2012. To qualify for early buy program incentives, customers must commit to the terms of the program which specify eligible products and quantities, order deadlines and available terms, discounts and rebates. Early Buy shipments in December 2013 were higher than in December 2012 due, in part, to additions to our distribution network, an increase in demand for our products and a revised pricing strategy. There are no product return rights granted to our distributors except those granted pursuant to the warranty provisions of our agreements with distributors. We generally do not extend the payment terms beyond those offered in the program. In addition, our products are not susceptible to rapid changes in technology that may cause them to become obsolete. The early buy program can have a significant impact on our sales, receivables and inventory levels. We have provided further discussion of our receivables and inventory in the liquidity and capital resources section.

Gross Profit. Gross profit represents the difference between net sales and cost of sales. Cost of sales consists of raw materials costs, direct labor costs, manufacturing costs and freight. Raw materials costs generally include the costs to purchase and transport waste wood fiber, reclaimed polyethylene, or “PE material,” and pigmentation for coloring Trex products. Direct labor costs include wages and benefits of personnel engaged in the manufacturing process. Manufacturing costs consist of costs of depreciation, utilities, maintenance supplies and repairs, indirect labor, including wages and benefits, and warehouse and equipment rental activities.

Selling, General and Administrative Expenses. The largest component of selling, general and administrative expenses is personnel related costs, which include salaries, commissions, incentive compensation, and benefits of personnel engaged in sales and marketing, accounting, information technology, corporate operations, research and development, and other business functions. Another component of selling, general and administrative expenses is branding and other sales and marketing costs, which are used to build brand awareness of Trex. These costs consist primarily of advertising, merchandising, and other promotional costs. Other general and administrative expenses include professional fees, office occupancy costs attributable to the business functions previously referenced, and consumer relations expenses. As a percentage of net sales, selling, general and administrative expenses have varied from quarter to quarter due, in part, to the seasonality of our business.

Critical Accounting Estimates

Our significant accounting policies are described in Note 2 to our consolidated financial statements appearing elsewhere in this report. Our critical accounting estimates include the areas where we have made what we consider to be particularly difficult, subjective or complex judgments in making estimates, and where these estimates can significantly affect our financial results under different assumptions and conditions. We prepare our financial statements in conformity with accounting principles generally accepted in the United States. As a result, we are required to make estimates, judgments and assumptions that we believe are reasonable based upon the information available. These estimates, judgments and assumptions affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the periods presented. Actual results could be different from these estimates.

21

Table of Contents

Inventories. We account for inventories at the lower of cost (last-in, first-out, or “LIFO”) or market value. We believe that our current inventory of finished goods will be saleable in the ordinary course of business and, accordingly, have not established significant reserves for estimated slow moving products or obsolescence. At December 31, 2013, the excess of the replacement cost of inventory over the LIFO value of inventory was approximately $24.5 million.

Product Warranty. We warrant that our products will be free from material defects in workmanship and materials. This warranty generally extends for a period of 25 years for residential use and 10 years for commercial use. (With respect to TrexTrim™ and Trex Reveal^® Railing, the warranty period is 25 years for both residential and commercial use.) With respect to our Transcend^®, Enhance^®, Select^® and Universal Fascia product, we further warrant that the product will not fade in color more than a certain amount and will be resistant to permanent staining from food substances or mold (provided the stain is cleaned within seven days of appearance). This warranty extends for a period of 25 years for residential use and 10 years for commercial use. If there is a breach of such warranties, we have an obligation either to replace the defective product or refund the purchase price.

Historically, we have not had material numbers of claims submitted or settled under the provisions of our product warranties, with the exception of claims related to material produced at our Nevada facility prior to 2007 that exhibits surface flaking. We continue to receive and settle surface flaking claims and maintain a warranty reserve to provide for the settlement of these claims. In 2009, we agreed to a settlement of a class action lawsuit covering the surface defect, stipulating our responsibilities with regard to such claims. Estimating the warranty reserve for surface flaking claims requires management to estimate (1) the average cost to settle each claim and (2) the number of claims to be settled with payment, both of which are subject to variables that are difficult to estimate.

The cost per claim varies due to a number of factors, including the size of affected decks, the type of replacement material used, the cost of production of replacement material and the method of claim settlement. Although the cost per claim does vary, it is less volatile and more predictable than the number of claims to be settled with payment, which is inherently uncertain.

The key component driving our potential liability is the number of claims that will ultimately require payment. To estimate the number of future paid claims, we utilize actuarial techniques to quantify both the expected number of claims to be received and the percentage of those claims that will ultimately require payment. Estimates for both of these elements (number and percentage of claims that will ultimately require payment) are quantified using a range of assumptions derived from the recent claim count history and the identification of factors influencing the claim counts, including the downward trend in received claims due to the passage of time since production of the suspect material. For each of the various parameters used in the analysis, the assumed values in the actuarial valuation produce results that represent our best estimate for the ultimate number of claims to be settled with payment.

A number of factors make estimates of the number of claims to be received inherently uncertain. We believe that production of the suspect material was confined to material produced from our Nevada facility prior to 2007, but are unable to determine the amount of suspect material produced or the exact time it takes for surface flaking to become evident in the suspect material and materialize as a claim. Furthermore, the aforementioned 2009 class action settlement and related public notices led to a significant increase in claims received in 2009 and disrupted the claims data and settlement patterns. Lastly, we are not aware of any analogous industry data that might be referenced in predicting future claims to be received.

The number of surface flaking claims received peaked in 2009 in conjunction with the class action settlement and related public notices and the trend of claims received began to decline significantly in 2010 and 2011, consistent with the our belief that the effect of the 2009 spike in claims was largely an acceleration of claims previously expected to be filed in future periods. As a result of the effects of the class action settlement and because the suspect material had not been produced since prior to 2007, we anticipated that the rate of decline in claims received would accelerate and the number of claims received would continue to decline significantly in 2012.

22

Table of Contents

We monitor surface flaking claims activity each quarter for indications that our estimate of the number of claims expected requires revision. Due to extensive use of decks during the summer outdoor season, variance to annual claims expectations is typically observed during the latter part of our fiscal year. During the third quarter of 2012, based on an analysis of additional claims activity, we observed that the actual rate of decline in claims received in 2012 would fall short of our anticipated rate of decline. As a result, we revised our estimate of the future claims to be received to reflect a rate of decline that incorporated levels experienced in 2012. Although the number of claims expected to be received continued to decline each year, the effect of reducing the anticipated rate of decline increased the total number of claims expected in future years. As a result of these changes in estimate, we recorded an increase to the warranty reserve of $20 million during the three months ended September 30, 2012.

During the third quarter of 2013, the number of claims received was significantly greater than our prior estimates. Although the number of claims received during the first nine months of 2013 remained lower than those received during the first nine months of 2012, the number of claims received during the third quarter of 2013 exceeded those received during the third quarter of 2012. This represented the first quarterly year-over-year increase in the number of claims received since the 2009 class action settlement was made public.

We believe that this unexpected increase in claims was due primarily to a response to communications made by the Company in July 2013 informing homeowners of potential hazards associated with decking products exhibiting surface flaking that are not timely replaced. These communications included a public press release and over 10,000 letters sent to homeowners that previously filed surface flaking claims. In addition to contributing to the increase in new claims received, these communications resulted in the reopening of a significant number of claims previously closed. Furthermore, although not directly related to the surface flaking issue, in August 2013, the United States District Court, Northern District of California granted preliminary approval of a settlement agreement related to cases in which plaintiffs generally alleged certain defects in our products and alleged misrepresentations relating to mold growth. We believe that public notices made subsequent to the Court approval increased homeowner awareness of product-related issues and contributed to the increased number of surface flaking claims received during the third quarter of 2013. As a result of these public communications, we expect to experience elevated claims activity, both in new claims received and reopened claims, for the near future, after which we expect a return to previously-experienced rates of decline. However, the elevated claims activity resulted in a material increase in the expected number of claims to settle with payment.

In addition to the increased number of expected claims to be settled with payment, we experienced an increase in the average cost to settle a claim during 2013. Analysis of claims data indicates that the increased cost per claim is driven primarily by an increase in the average size of settled claims, which we believe reflects a shift from partial deck replacements to full deck replacements. Also, our August 2013 decision to discontinue production of the Accents^® product, which is currently used as replacement material for surface flaking claims, necessitated a change in the average cost expectations due to the implications of transitioning to alternative replacement material.

Due to the unfavorable claims and cost experience during the three months ended September 30, 2013, as described above, we recorded a $20 million increase to the warranty reserve.

Our analysis is based on currently known facts and a number of assumptions. Projecting future events such as the number of claims to be received, the number of claims that will require payment and the average cost of claims could cause the actual warranty liabilities to be higher or lower than those projected which could materially affect our financial condition, results of operations or cash flow. We estimate that the number of claims received will decline over time. If the level of claims received does not diminish consistent with our expectations or if the cost to settle claims increases, it could result in additional increases to the warranty reserve and reduced earnings and cash flows in future periods. We estimate that a 10% change in the expected number of remaining claims to be settled with payment or the expected cost to settle claims may result in approximately a $4.1 million change in the warranty reserve.

23

Table of Contents

The following table details surface flaking claims activity related to our warranty:

For additional information about product warranties, see Notes 2 and 12 to the consolidated financial statements appearing elsewhere in this report.

Contract Termination Costs. In anticipation of relocating our corporate headquarters, we entered into a lease agreement in 2005. We reconsidered and decided not to move our headquarters. The lease obligates us to lease 55,047 square feet of office space through June 30, 2019. As of December 31, 2013, we have executed subleases for 41,701 square feet of the leased space and are currently marketing the remaining portion of the space to find a suitable tenant. We estimate that the present value of the estimated future sublease receipts, net of transaction costs, will be less than our remaining minimum lease payment obligations under our lease and have recorded a liability for the expected shortfall. During the three months ended September 30, 2013, a subtenant defaulted on its sublease payments. As a result we revised our estimate of sublease receipts and recorded a $1.1 million charge to selling, general and administrative expenses to increase our liability.

To estimate future sublease receipts for the periods beyond the term of the existing subleases, we have assumed that the existing subleases will be renewed or new subleases will be executed at rates consistent with rental rates in the current subleases or estimated market rates. However, management cannot be certain that the timing of future subleases or the rental rates contained in future subleases will not differ from current estimates. Factors such as the availability of commercial office space, poor economic conditions and subtenant preferences will influence the terms achieved in future subleases. The inability to sublet the office space in the future or unfavorable changes to key management assumptions used in the estimate of the future sublease receipts may result in material charges to selling, general and administrative expenses in future periods.

Income Taxes. We account for income taxes in accordance with ASC 740, “Income Taxes.” Deferred tax assets and liabilities are recognized based on the difference between the financial statement basis and tax basis of assets and liabilities using enacted rates expected to be in effect during the year in which the differences reverse. In accordance with ASC 740, we assess the likelihood that our deferred tax assets will be realized. Deferred tax assets are reduced by a valuation allowance when, after considering all available positive and negative evidence, it is determined that it is more likely than not that some portion, or all, of the deferred tax asset will not be realized. As of December 31, 2012, we had a full valuation allowance recorded against our deferred tax assets. Our assessment gave significant weight to the negative evidence of our cumulative loss history in the three years ended December 31, 2012.

As of December 31, 2013, we determined that we more likely than not will realize most of our deferred tax assets and, as a result, reversed a significant portion of our valuation allowance. The analysis performed to assess the need for a valuation allowance included an evaluation of the four possible sources of taxable income as identified in ASC 740, including the consideration of the positive evidence of our cumulative income history in the three years ended December 31, 2013.

24

Table of Contents

Based on this analysis, as well as due to the realization of certain deferred tax assets during 2013, we recorded a $19.9 million reduction of our valuation allowance during the year ended December 31, 2013, $10.9 million of which was a direct result of our decision to exit a full valuation allowance. As of December 31, 2013, the remaining valuation allowance is $4.2 million, primarily related to certain state tax credits we estimate will expire before they are realized. We will analyze our position in subsequent reporting periods, considering all available positive and negative evidence, in determining the expected realization of our deferred tax assets.

Stock-Based Compensation. Under the provisions of FASB ASC Topic 718, “Stock Compensation,” we calculate the grant date fair value of share-based awards using the Black-Scholes valuation model for grants subsequent to the adoption of ASC 718. Determining the fair value of share-based awards is judgmental in nature and involves the use of significant estimates and assumptions, including the term of the share-based awards, risk-free interest rates over the vesting period, expected dividend rates, the price volatility of our shares and forfeiture rates of the awards. We base our fair value estimates on assumptions we believe to be reasonable but that are inherently uncertain. Actual future results may differ from those estimates.

Results of Operations

The following table shows, for the last three years, selected statement of comprehensive income data as a percentage of net sales:

2013 Compared to 2012

Net Sales. Net sales in 2013 increased 11.4% to $342.5 million from $307.4 million in 2012. The increase in net sales was due primarily to an 8% increase in sales volume and a 3% increase in the average price per unit in 2013 compared to 2012. We attribute the increase in sales volumes in 2013 compared to 2012 to the execution of growth strategies including increased market share from additions to our distribution network, the introduction of new product lines and a revised pricing strategy. The increase in average price per unit in 2013 was primarily driven by sales mix including an increased attachment rate on railing products.

Gross Profit. Gross profit increased 16.6% to $98.6 million in 2013 from $84.6 million in 2012. Gross profit in 2013 and 2012 was adversely affected by $21.5 million and $21.5 million of non-operating charges, respectively. We recognized $20.0 million and $21.5 million of charges to increase the previously established warranty reserve in 2013 and 2012, respectively. In addition, in 2013, we recognized a $1.5 million charge related to market share expansion and a reset of prices for certain products as we transition our remaining products to the next generation product offering. Excluding the aforementioned charges in both 2013 and 2012, gross profit increased to $120.1 million in 2013 compared to $106.1 in 2012. Excluding the aforementioned charges in both 2013 and 2012, gross profit as a percentage of net sales, gross margin, increased by 40 basis

25

Table of Contents

points to 34.9% from 34.5% in 2012. The 2012 gross margin reflected $4.5 million of LIFO inventory liquidation income. The 2013 underlying gross margin at 34.9% was 185 basis points higher than 2012 excluding the LIFO inventory liquidation income. Key drivers to the favorable underlying gross margin for 2013 include lower sales related items, increased capacity utilization rates and continued manufacturing efficiencies.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased $2.1 million, or 2.9%, to $74.0 million in 2013 from $71.9 million in 2012. The increase in selling, general and administrative expenses in 2013 compared to 2012 was attributable to various factors including a $1.2 million decrease in the benefits recognized from reductions in the provision for future contingent payments associated with the 2011 Iron Deck acquisition and a $0.9 million increase in legal and claims servicing costs primarily resulting from the mold growth class action lawsuit that was settled in December 2013 and related public and homeowner communications. As a percentage of net sales, total selling, general and administrative expenses decreased to 21.6% in 2013 from 23.4% in 2012.

Interest Expense. Net interest expense decreased 93.3% to $0.6 million in 2013 compared to $8.9 million in 2012. The decrease resulted from carrying lower debt levels at lower interest rates during 2013 compared to 2012. This was primarily driven by the repayment of the $91.9 million principal balance on the 6.0% convertible notes on July 2, 2012. As a percentage of net sales, interest expense decreased to 0.2% in 2013 from 2.9% in 2012.

Provision for Income Taxes. We recorded a benefit for income taxes of $10.5 million in 2013 compared to an expense of $1.0 million in 2012. The related effective tax rates were (43.9%) in 2013 and 27.1% in 2012. During 2013, our income tax benefit consisted of a reduction of a substantial portion of our valuation allowance on our deferred tax asset as well as statutory federal and state taxes, permanent book to tax differences, Federal tax credits, and other miscellaneous tax items. During 2012, our income tax expense consisted of cash taxes to various states where no net operating loss carry-forward existed to offset current year taxable income, unfavorable effect of permanent differences related to employee stock awards and increases in indefinite-lived deferred tax liabilities, primarily related to goodwill amortized for income taxes.

Our effective tax rate for both years is substantially different than the statutory rate due to the effect of the valuation allowance we maintained against our net deferred tax assets. During the three months ended December 31, 2013, we determined it to be more likely than not that we will realize most of our deferred tax assets. During 2013, we recorded a $19.9 million income tax benefit resulting from a significant reversal of our valuation allowance, $10.9 million of which was a direct result of our decision to exit a full valuation allowance.

2012 Compared to 2011

Net Sales. Net sales in 2012 increased 15.2% to $307.4 million from $266.8 million in 2011. The increase in net sales was due primarily to a 15% increase in sales volume in 2012 compared to 2011. We attribute the increase in sales volumes in 2012 compared to 2011 to various factors, including:

Gross Profit. Gross profit increased to $84.6 million in 2012 from $62.8 million in 2011. Gross profit as a percentage of net sales increased to 27.5% in 2012 from 23.5% in 2011. Gross profit in 2012 was adversely affected by a $21.5 million increase to the warranty reserve. Gross profit in 2011 was adversely affected by a $10.0 million increase to the warranty reserve. Excluding the aforementioned charges, gross profit in 2012 was $106.1 million, a $33.3 million increase compared to 2011. Underlying gross margin in 2012 was 34.6%, a 7.3%

26

Table of Contents

increase compared to 2011. Our gross margin improvement was due to improved manufacturing efficiencies, a favorable product mix as we transition decking sales to our shelled products and a favorable inventory valuation adjustment related to our significant reduction in inventory. This was offset by start-up costs related to the introduction of our high performance shelled products.

Selling, General and Administrative Expenses. Selling, general and administrative expenses increased $11.3 million, or 18.6%, to $71.9 million in 2012 from $60.6 million in 2011. The increase in selling, general and administrative expenses in 2012 was primarily related to a $9.6 million increase in personnel related expenses due to increased incentive compensation, sales commissions and severance costs. In 2012, we recorded a $1.9 million loss on the disposal of equipment made obsolete by improvements in manufacturing technologies and a $1.5 million expense for costs associated with the mold and mildew class action lawsuit. These increases were partially offset by a $1.4 million benefit in 2012 due to a reduction in the provision for future contingent payments resulting from decreased near-term sales projections of steel deck framing systems. As a percentage of net sales, total selling, general and administrative expenses increased to 23.4% in 2012 from 22.7% in 2011.

Interest Expense. Net interest expense decreased 45.3% to $8.9 million in 2012 compared to $16.4 million in 2011. The decrease was the result of a significant decrease in debt during 2012, primarily due to the repayment of the $91.9 million principal balance on the convertible notes on July 2, 2012. As a percentage of net sales, interest expense decreased to 2.9% in 2012 from 6.1% in 2011.

Provision for Income Taxes. We recorded an expense for income taxes of $1.0 million in 2012 compared to a benefit of $2.6 million in 2011. The related effective tax rates were 27.1% in 2012 and 18.4% in 2011. The effective tax rate for both years is substantially different than the statutory rate because of our full valuation allowance on our net deferred tax assets. As a result, our provision for income taxes and corresponding effective tax rate, are primarily a function of cash taxes paid to various jurisdictions, changes in indefinite-lived deferred tax liabilities and changes to liabilities associated with uncertain tax positions. The benefit recognized in 2011 was primarily related to the effects of favorably settled uncertain federal tax positions previously reserved under the provisions of ASC 740. The income tax expense recognized in 2012 was primarily related to cash taxes to various states where no net operating loss carry-forward is available to offset current year taxable income, unfavorable effect of permanent differences related to employee stock awards and increases in indefinite-lived deferred tax liabilities, primarily related to goodwill amortized for income taxes.

Liquidity and Capital Resources

We finance operations and growth primarily with cash flow from operations, borrowings under the credit facility and other loans, operating leases and normal trade credit terms from operating activities.

Sources and Uses of Cash. Net cash provided by operating activities totaled $45.2 million in 2013 compared to net cash provided by operating activities of $60.4 million in 2012. The $15.2 million year-over-year reduction in cash provided by operating activities was primarily driven by increased inventory and accounts receivable balances, partially offset by an increase in net sales and earnings during 2013 compared to 2012. The increase in inventory balances at December 31, 2013 was to support conversion to our next generation product offerings and additions to our distribution network.

Accounts receivable balances increased to $37.3 million at December 31, 2013 compared to $26.5 million at December 31, 2012 due to increased sales in late 2013 primarily driven by additions to our distribution network, an increase in demand for our products and a revised pricing strategy. Substantially all of the accounts receivable balances at December 31, 2013 were subject to the terms of our early buy program. We expect to collect all outstanding accounts receivable balances by May 2014.

27

Table of Contents

Net cash used in investing activities totaled $12.7 million in 2013 compared to cash used in investing activities of $7.5 million in 2012. The increase is primarily attributable to an increase in capital expenditures in 2013 compared to 2012 due to a focus on new product launches and manufacturing efficiencies. Capital expenditures in 2013 consisted primarily of manufacturing equipment for process and productivity improvements, including retrofitting lines to produce new products. In 2012, net cash used in investing activities totaled $7.5 million compared to $9.4 million in 2011.

Net cash used in financing activities was $30.9 million in 2013 compared to cash used in financing activities of $55.3 million in 2012. The $24.4 million improvement in 2013 was due to the fact that, in 2012, we used cash on hand and $37.0 million of restricted cash to fully repay the $91.9 million principal balance on our convertibles notes. In 2013, we used cash on hand to repurchase $25.0 million of our common stock. Net cash used in financing activities was $55.3 million in 2012 compared to net cash used in financing activities of $47.2 million in 2011.

On February 19, 2014, our Board of Directors authorized an additional common stock repurchase program of up to $50 million of our outstanding common stock. This authorization has no expiration date.

Inventory in Distribution Channels. We sell our products through a tiered distribution system. We have approximately 20 distributors and two mass merchandisers to which we sell our products. These distributors in turn sell the products to approximately 3,100 dealers who in turn sell the products to the end users. Consistent with industry practices, to ensure adequate availability of product to meet anticipated seasonal consumer demand and to enable production planning, we have historically provided our distributors and dealers incentives to build inventory levels before the start of the prime deck-building season. These incentives include prompt payment discounts and favorable payment terms. In addition, from time to time, we may offer price discounts or volume rebates on specified products and other incentives based on increases in purchases as part of specific promotional programs. There are no product return rights granted to our distributors except those granted pursuant to the warranty provisions of our agreements with distributors. While we do not typically receive any information regarding inventory in the distribution channel from any dealers, we receive limited information from some but not all of our distributors regarding their inventory. Because few distributors provide us with any information regarding their inventory, we cannot definitively determine the level of inventory in the distribution channel at any time. Our sales in the fourth quarter of 2013 were higher than our sales in the fourth quarter of 2012. We believe that distributor inventory levels at December 31, 2013 are comparable to distributor inventory levels at December 31, 2012. Significant changes in inventory levels in the distribution channel without a corresponding change in end-user demand could have an adverse effect on future sales.

We seek to maintain favorable relationships with our distributors. However, on occasion, we may need to replace a distributor. Historically, we have had little difficulty replacing a distributor and have experienced little or no disruption to operations or liquidity. We believe that in the event we needed to replace a distributor, it would not have an adverse effect on our profitability or liquidity.

Product Warranty. We continue to receive and settle claims related to material produced at our Nevada facility prior to 2007 that exhibits surface flaking and regularly monitor the adequacy of the warranty reserve. During the year ended December 31, 2013, we paid approximately $8.2 million to settle claims against the warranty reserve, which had a material adverse effect on cash flow from operations, and increased the warranty reserve an additional $20.0 million. We estimate that the number of claims received will decline over time. If the level of new claims received does not diminish consistent with our expectations, it could result in additional increases to the warranty reserve and reduced earnings and cash flow in future periods.

Indebtedness. On January 6, 2012, we entered into an Amended and Restated Credit Agreement (the “Amended Credit Agreement”) with BB&T, as a lender, Administrative Agent, Swing Line Lender, Letter of Credit Issuer and a Collateral Agent; Wells Fargo Capital Finance, LLC (“Wells Fargo”) as a lender and a Collateral Agent; and BB&T Capital Markets (“BB&T Capital”), as Lead Arranger to amend the Credit

28

Table of Contents

Agreement. BB&T and Wells Fargo are referenced herein as the “Lenders.” These new agreements replace our previous revolver note, the swing advance note and the letter of credit facility, in their entireties and account for all of our debt capacity. No additional fees were due or owing as a result of the termination of the previous agreements.

Under the Amended Credit Agreement, the Lenders agreed to provide us with one or more revolving loans in a collective maximum principal amount of $100 million (the “Revolver Loans”).

Included within the Revolver Loan limit are sublimits for a Letter of Credit Facility in an amount not to exceed $15 million (the “Letter of Credit Facility”); and Swing Advances in an aggregate principal amount at any time outstanding not to exceed $5 million (the “Swing Advance Loan”). The Revolver Loans, the Letter of Credit Facility and the Swing Advance Loan are collectively referred to herein as the “Loans.” The Loans were obtained for the purpose of raising working capital and refinancing our existing indebtedness.

The Revolver Loans, the Swing Advances and the Letter of Credit Facility provide us, in the aggregate, the ability to borrow a principal amount not to exceed $100 million at any one time outstanding (the “Revolving Loan Limit”) (subject to certain Borrowing Base requirements as described in the Amended Credit Agreement which include limits on Eligible Accounts and Inventory as described in the Amended Credit Agreement and any written agreement which may be executed from time to time by us and each of the Collateral Agents). We are not obligated to borrow any amount under the Revolving Loan Limit. Within the Revolving Loan Limit, we may borrow or repay at any time or from time to time while the Revolving Loans are in effect.

Base Rate Advances (as defined in the Amended Credit Agreement) under the Revolver Loans and the Swing Advances accrue interest at the Base Rate plus the Applicable Margin (as defined in the Amended Credit Agreement) and Euro-Dollar Advances for the Revolver Loans and Swing Advances accrue interest at the Adjusted London InterBank Offered Rate plus the Applicable Margin (as defined in the Amended Credit Agreement). Repayment of all then outstanding principal, interest, fees and costs is due on January 9, 2015.

The Letter of Credit Facility provides that upon our application, BB&T shall issue to our credit one or more letters of credit in the aggregate amount of up to $15 million, or such lesser amount as may be required by law. We shall reimburse BB&T for all amounts payable, including interest, under a Letter of Credit at the earlier of (i) the date set forth in the application or (ii) on business day after the payment under such Letter of Credit by BB&T.

On February 26, 2013, we entered into a First Amendment (“First Amendment”) to the Amended Credit Agreement dated as of January 6, 2012. Pursuant to the First Amendment, the Amended Credit Agreement was amended to temporarily increase the maximum amount of the Revolver Loans from $100 million to $125 million during the period from February 26, 2013 through and including June 30, 2013 to meet seasonal cash requirements and reduce certain interest rate margins and costs. In conjunction with the First Amendment, the Revolver Notes executed by us to each of BB&T and Wells Fargo dated as of January 6, 2012 were amended and restated. The maximum amount of the Revolver Loans reverted to $100 million on July 1, 2013.

On December 17, 2013, we entered into a Second Amendment (“Second Amendment”) to the Amended Credit Agreement dated as of January 6, 2012, as amended by the First Amendment dated February 26, 2013 (the “Credit Agreement”). Pursuant to the Second Amendment, the Credit Agreement was amended to temporarily increase the maximum amount of the Revolver Loans from $100 million to $125 million during the period from January 1, 2014 through and including June 30, 2014 to meet seasonal cash requirements. No other material changes were made to the terms of the Credit Agreement.

Amounts drawn under the Revolver Loans are subject to a borrowing base consisting of certain accounts receivables, inventories, machinery and equipment and real estate. At December 31, 2013, we had no outstanding borrowings under the Revolver Loans and additional available borrowing capacity of approximately $71.9 million.

29

Table of Contents

Compliance with Debt Covenants and Restrictions. Our ability to make scheduled principal and interest payments, borrow and repay amounts under any outstanding revolving credit facility and continue to comply with any loan covenants depends primarily on our ability to generate sufficient cash flow from operations. To remain in compliance with financial covenants in the Credit Agreement, we are required to maintain specified financial ratios based on levels of debt, capital, net worth, fixed charges, and earnings (excluding extraordinary gains and extraordinary non-cash losses) before interest, taxes, depreciation and amortization, all of which are subject to the risks of the business, some of which are discussed in this report under “Risk Factors.” We were in compliance with all covenants contained in our Loans at December 31, 2013. Under the Credit Agreement, the material financial covenants and restrictions are as follows:

Failure to comply with the financial covenants in our Credit Agreement could be considered a default of our repayment obligations and, among other remedies, could accelerate payment of any amounts outstanding under our Credit Agreement.

At December 31, 2013, we had no outstanding indebtedness, and the interest rate on the revolving credit facility was 1.9%.

Contractual Obligations. The following tables show, as of December 31, 2013, our contractual obligations and commercial commitments, which consist primarily of purchase commitments and operating leases (in thousands):

Contractual Obligations

Payments Due by Period

We do not have off-balance sheet financing arrangements other than operating leases.

Capital and Other Cash Requirements. We made capital expenditures of $13.1 million in 2013, $7.6 million in 2012 and $7.4 million in 2011, primarily related to new products and to make process and productivity improvements. We currently estimate that capital expenditures in 2014 will be approximately $15 million. Capital expenditures in 2014 are expected to be used primarily to support cost reduction initiatives, new product launches in current and adjacent categories and general business support.

30

Table of Contents

We believe that cash on hand, cash flow from operations and borrowings expected to be available under our revolving credit facility will provide sufficient funds to enable us to fund planned capital expenditures, make scheduled principal and interest payments, fund the warranty reserve, meet other cash requirements and maintain compliance with terms of our debt agreements for at least the next 12 months. We currently expect to fund future capital expenditures from operations and borrowings under the revolving credit facility. The actual amount and timing of future capital requirements may differ materially from our estimate depending on the demand for Trex and new market developments and opportunities. Our ability to meet our cash needs during the next 12 months and thereafter could be adversely affected by various circumstances, including increases in raw materials and product replacement costs, quality control problems, higher than expected product warranty claims, service disruptions and lower than expected collections of accounts receivable. In addition, any failure to negotiate amendments to our existing debt agreements to resolve any future noncompliance with financial covenants could adversely affect our liquidity by reducing access to revolving credit borrowings needed primarily to fund seasonal borrowing needs. We may determine that it is necessary or desirable to obtain financing through bank borrowings or the issuance of debt or equity securities to address such contingencies or changes to our business plan. Debt financing would increase our level of indebtedness, while equity financing would dilute the ownership of our stockholders. There can be no assurance as to whether, or as to the terms on which, we would be able to obtain such financing, which would be restricted by covenants contained in our existing debt agreements.

We are subject to market risks from changing interest rates associated with our borrowings. To meet our seasonal working capital needs, we borrow periodically on our variable rate revolving line of credit. At December 31, 2013, we had no debt outstanding under our revolving line of credit. While variable rate debt obligations expose us to the risk of rising interest rates, an increase of 1% in interest rates would not have a material adverse effect on our overall financial position, results of operations or liquidity based on balances outstanding at December 31, 2013.

In certain instances we may use interest rate swap agreements to modify fixed rate obligations to variable rate obligations, thereby adjusting the interest rates to current market rates and ensuring that the debt instruments are always reflected at fair value. We had no interest rate swap agreements outstanding as of December 31, 2013.

The financial statements listed in Item 15 and appearing on pages F-2 through F-27 are incorporated by reference in this Item 8 and are filed as part of this report.

None.

Evaluation of Disclosure Controls and Procedures

Our management, with the participation of our Chief Executive Officer, who is our principal executive officer, and our Chief Financial Officer, who is our principal financial officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of December 31, 2013. Based upon this evaluation, our Chief Executive Officer and our Chief Financial Officer concluded that our disclosure controls and procedures were effective as of December 31, 2013.

31

Table of Contents

Management’s Report on Internal Control Over Financial Reporting

We, as members of management of Trex Company, Inc. (the “Company”), are responsible for establishing and maintaining adequate internal control over financial reporting. The Company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies and procedures may deteriorate.

We assessed the Company’s internal control over financial reporting as of December 31, 2013, based on criteria for effective internal control over financial reporting established in “Internal Control-Integrated Framework (1992)” issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “COSO Framework”). Based on this assessment, we concluded that, as of December 31, 2013, our internal control over financial reporting was effective, based on the COSO Framework.

The effectiveness of our internal control over financial reporting as of December 31, 2013, has been audited by Ernst & Young LLP, an independent registered public accounting firm, as stated in their report, which follows hereafter.

Changes in Internal Control Over Financial Reporting

There have been no changes in the Company’s internal control over financial reporting identified in connection with the evaluation described above in “Management’s Report on Internal Control Over Financial Reporting’ that occurred during the Company’s fourth fiscal quarter that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

32

Table of Contents

Report of Ernst & Young LLP, Independent Registered Public Accounting Firm,

on Internal Control Over Financial Reporting

The Board of Directors and Stockholders of Trex Company, Inc.

We have audited Trex Company, Inc.’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 framework) (the COSO criteria). Trex Company, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting in Item 9A. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Trex Company, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2013, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Trex Company, Inc., as of December 31, 2013 and 2012, and the related consolidated statements of comprehensive income, changes in stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2013 of Trex Company, Inc. and our report dated February 24, 2014 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Richmond, Virginia

February 24, 2014

33

Table of Contents

Appointment of Gerald Volas as a Director of the Company

On February 19, 2014, the Board of Directors of the Company increased the size of the Board from seven members to eight members, and appointed Gerald Volas as a director to fill the resulting vacancy, both to be effective on March 1, 2014. Mr. Volas was appointed to the class of directors whose term of office expires at the annual meeting of stockholders scheduled for April 30, 2014, and Mr. Volas will be included among the nominees being submitted for election at such annual meeting. Mr. Volas will receive compensation for service on the Board of Directors and any committees pursuant to the Company’s Amended and Restated 1999 Incentive Plan for Outside Directors (the “Incentive Plan for Outside Directors”). The Incentive Plan for Outside Directors was amended and restated as of July 24, 2012, and filed as Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarterly period ended September 30, 2012.

Mr. Volas has been employed by Masco Corporation, one of the world’s leading manufacturers of brand-name products for the home improvement and new home construction industries, in various positions of increasing responsibility since 1982. Since February 2005, he has served as a Group Executive responsible for almost all of Masco’s operating companies at one time or another. He currently is responsible for a number of Masco operating companies accounting for approximately 50% of Masco’s revenues in 2012. From April 2001 to February 2005, he served as President of Liberty Hardware, a Masco operating company, from January 1996 to April 2001, he served as a Group Controller supporting a variety of Masco operating companies, and from May 1982 to January 1996, he served in progressive financial roles including Vice President/Controller at BrassCraft Manufacturing Company, a Masco operating company. Mr. Volas is a Certified Public Accountant. He received a Bachelor of Business Administration degree from the University of Michigan.

Stock Split

On February 19, 2014, the Board of Directors of the Company approved a two -for-one stock split of the Company’s common stock, par value $0.01. The stock split will be in the form of a stock dividend to be distributed on May 7, 2014 to stockholders of record at the close of business on April 7, 2014. The financial statements presented in this Form 10-K appropriately do not reflect the effects of the stock split.

34

Table of Contents

PART III

See “Executive Officers and Directors” in Part I, Item 1 of this report for the information about our executive officers, which is incorporated by response in this Item 10. Other information responsive to this Item 10 is incorporated herein by reference to our definitive proxy statement for our 2014 annual meeting of stockholders, which we will file with the SEC on or before 120 days after our 2013 fiscal year-end.

We have adopted a code of conduct and ethics, which is applicable to all of our directors, officers and employees, including our Chief Executive Officer and Chief Financial Officer. The code is available on our corporate web site and in print to any stockholder who requests a copy. We also make available on our web site, at www.trex.com, and in print to any stockholder who requests them, copies of our corporate governance principles and the charters of each standing committee of our board of directors. Requests for copies of these documents should be directed to Corporate Secretary, Trex Company, Inc., 160 Exeter Drive, Winchester, Virginia 22603-8605. To the extent required by SEC rules, we intend to disclose any amendments to our code of conduct and ethics, and any waiver of a provision of the code with respect to our principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions, on our web site referred to above within four business days following any such amendment or waiver, or within any other period that may be required under SEC rules from time to time.

Information responsive to this Item 11 is incorporated herein by reference to our definitive proxy statement for our 2014 annual meeting of stockholders, which we will file with the SEC on or before 120 days after our 2013 fiscal year-end.

Information responsive to this Item 12 is incorporated herein by reference to our definitive proxy statement for our 2014 annual meeting of stockholders, which we will file with the SEC on or before 120 days after our 2013 fiscal year-end.

Information responsive to this Item 13 is incorporated herein by reference to our definitive proxy statement for our 2014 annual meeting of stockholders, which we will file with the SEC on or before 120 days after our 2013 fiscal year-end.

Information responsive to this Item 14 is incorporated herein by reference to our definitive proxy statement for our 2014 annual meeting of stockholders, which we will file with the SEC on or before 120 days after our 2013 fiscal year-end.

35

Table of Contents

PART IV

(a)(1) The following consolidated financial statements of the Company appear on pages F-2 through F-27 of this report and are incorporated by reference in Part II, Item 8:

(a)(2) The following financial statement schedule is filed as part of this report:

All other schedules for which provision is made in the applicable accounting regulations of the Securities and Exchange Commission are not required under the related instructions or are inapplicable or not material and, therefore, have been omitted.

(a)(3) The following exhibits are either filed with this Form 10-K or are incorporated herein by reference. The Company’s Securities Exchange Act file number is 001-14649.

36

Table of Contents

37

Table of Contents

38

Table of Contents

39

Table of Contents

40

Table of Contents

41

Table of Contents

TREX COMPANY, INC.

Index to Consolidated Financial Statements

The following Consolidated Financial Statement Schedule of the Registrant is filed as part of this Report as required to be included in Item 15(a)(2):

F-1

Table of Contents

Report of Ernst & Young LLP, Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of Trex Company, Inc.

We have audited the accompanying consolidated balance sheets of Trex Company, Inc. as of December 31, 2013 and 2012, and the related consolidated statements of comprehensive income, changes in stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2013. Our audits also included the financial statement schedule listed in the Index at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Trex Company, Inc. at December 31, 2013 and 2012, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2013, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Trex Company, Inc.’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 framework) and our report dated February 24, 2014 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Richmond, Virginia

February 24, 2014

F-2

Table of Contents

TREX COMPANY, INC.

CONSOLIDATED BALANCE SHEETS