UFP TECHNOLOGIES INC - Quarter Report: 2019 June (Form 10-Q)

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark one)

[X] QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended     JUNE 30, 2019    

OR

[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____ to ____

Commission File Number: 001-12648

UFP Technologies, Inc.

(Exact name of registrant as specified in its charter)

100 Hale Street, Newburyport, MA 01950, USA

(Address of principal executive offices) (Zip Code)

(978) 352-2200

(Registrant's telephone number, including area code)

_________________________________________

(Former name, former address, and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes    X   ; No ____

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes    X   ; No ____

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ____; No    X   

Securities registered pursuant to Section 12(b) of the Act:

7,428,229 shares of registrant’s Common Stock, $0.01 par value, were outstanding as of August 1, 2019.

UFP Technologies, Inc.

Index

UFP Technologies, Inc.

Condensed Consolidated Balance Sheets

(In thousands, except share data)

(Unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

UFP Technologies, Inc.

Condensed Consolidated Statements of Income

(In thousands, except per share data)

(Unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

UFP TECHNOLOGIES, INC.

Condensed Consolidated Statements of Stockholders’ Equity

(In thousands)

(Unaudited)

The accompanying notes are an integral part of these consolidated financial statements.

UFP Technologies, Inc.

Condensed Consolidated Statements of Cash Flows

(In thousands)

(Unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Notes to Interim Condensed Consolidated Financial Statements

Forward-looking Statements

Some of the statements contained in this Report are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (“Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (“Exchange Act”). These statements are subject to known and unknown risks, uncertainties, and other factors, which may cause our or our industry’s actual results, performance, or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Forward-looking statements include, but are not limited to, statements about the Company’s prospects, anticipated trends in the different markets in which the Company competes, including the medical, automotive, consumer, aerospace and defense, industrial and electronics markets, statements regarding anticipated new customer and vendor contracts, anticipated advantages and the timing associated with requalification of parts, anticipated advantages of maintaining fewer, larger plants, anticipated advantages the Company expects to realize from its investments and capital expenditures, expectations regarding the manufacturing capacity and efficiencies of the Company’s new production equipment, statements about new product offerings and program launches and the expected timing thereof, statements about the Company’s acquisition opportunities and strategies, statements about the Company’s acquisition of Dielectrics and the integration of the Dielectrics business, the Company’s participation and growth in multiple markets, its business opportunities, the Company’s growth potential and strategies for growth, anticipated revenues and the timing of such revenues, and any indication that the Company may be able to sustain or increase its sales or earnings or sales and earnings growth rates. Investors are cautioned that such forward-looking statements involve risks and uncertainties, including without limitation risks and uncertainties associated with the Company’s acquisition and integration of Dielectrics, risks associated with plant closures and consolidations, and expected efficiencies from consolidating manufacturing, risks and uncertainties associated with the requalification of parts, the risk that the Company may not be able to finalize anticipated new and existing customer and vendor contracts, risks associated with new product and program launches, including lengthy manufacturing qualification processes, the ability launch on a timely basis, significant start-up and other expenses prior to launch, such as tooling and related manufacturing processes, and manufacturing inefficiencies that may affect the ability to generate profits, risks associated with the implementation of new production equipment and requalification or recertification of transferred equipment in a timely, cost-efficient manner, risks that any benefits from such new equipment may be delayed or not fully realized, or that the Company may be unable to fully utilize its expected production capacity, risks that the Company will sustain its manufacturing efficiencies and existing customer margins, risks and uncertainties associated with the identification of suitable acquisition candidates and the successful, efficient execution of acquisition transactions and integration of any such acquisition candidates, and risks related to our indebtedness and compliance with covenants contained in our financing arrangements. Accordingly, actual results may differ materially.

In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “should,” “could,” “would,” “expects,” “plans,” “anticipates,” “believes,” “estimates,” “projects,” “predicts,” “potential,” and similar expressions intended to identify forward-looking statements. Our actual results could be different from the results described in or anticipated by our forward-looking statements due to the inherent uncertainty of estimates, forecasts, and projections, and may be materially better or worse than anticipated. Given these uncertainties, you should not place undue reliance on these forward-looking statements. Forward-looking statements represent our estimates and assumptions only as of the date of this Report. We expressly disclaim any duty to provide updates to forward-looking statements, and the estimates and assumptions associated with them, after the date of this Report, in order to reflect changes in circumstances or expectations, or the occurrence of unanticipated events, except to the extent required by applicable securities laws. All the forward-looking statements are qualified in their entirety by reference to the factors discussed above and under “Risk Factors” set forth in Part I Item 1A of the Company’s Annual Report on Form 10-K for the year ended December 31, 2018, as well as the risks and uncertainties discussed elsewhere in this Report. We qualify all of our forward-looking statements by these cautionary statements. We caution you that these risks are not exhaustive. We operate in a continually changing business environment and new risks emerge from time to time.

Unless the context requires otherwise, the terms “we”, “us”, “our”, or “the Company” refer to UFP Technologies, Inc. and its consolidated subsidiaries.

Overview

UFP Technologies is an innovative designer and custom manufacturer of components, subassemblies, products and packaging primarily for the medical market. Utilizing highly specialized foams, films and plastics, the Company converts raw materials through laminating, molding, radio frequency welding and fabricating techniques. The Company is diversified by also providing highly engineered solutions to customers in the aerospace & defense, automotive, consumer, electronics and industrial markets. The Company consists of a single operating and reportable segment.

Sales for the Company for the six-month period ended June 30, 2019 grew 7.4% to $98.7 million from $91.9 million in the same period last year largely due to one additional month of sales at Dielectrics as well as strong growth in sales to the customers in the medical market. Streamlined manufacturing operations and a better mix of business enabled the Company to improve gross margins to 27.2% for the six-month period ended June 30, 2019, from 25.2% in the same period last year. Operating income and net income grew 44% and 45%, respectively.

The Company’s current strategy includes further organic growth and growth through strategic acquisitions.

Results of Operations

Sales

Sales for the three-month period ended June 30, 2019 increased approximately 4.9% to $51.4 million from sales of $49.0 million for the same period in 2018. The increase in sales was primarily due to increased sales to customers in the medical and aerospace & defense markets of 13.1% and 33.6%, respectively. These increases were partially offset by a collective decline in sales to the consumer, electronics and industrial markets of 20.2%. The increase in sales to customers in the medical market was primarily due to strong sales at Dielectrics as well as increased demand from legacy UFP medical customers. The increase in sales to customers in the aerospace & defense markets was primarily due to increased government spending. The collective decline in sales to customers in the consumer, electronics and industrial markets was primarily due to decreased demand for molded fiber packaging.

Sales for the six-month period ended June 30, 2019 increased approximately 7.4% to $98.7 million from sales of $91.9 million for the same period in 2018. The increase in sales was primarily due to increased sales to customers in the medical and aerospace & defense markets of 16.2% and 37.4%, respectively. These increases were partially offset by a collective decline in sales to the consumer, electronics and industrial markets of 18.6%. The increase in sales to customers in the medical market was primarily due to strong sales at Dielectrics (including on additional month of sales) as well as increased demand from legacy UFP medical customers. The increase in sales to customers in the aerospace & defense markets was primarily due to increased government spending. The collective decline in sales to customers in the consumer, electronics and industrial markets was primarily due to decreased demand for molded fiber packaging.

Gross Profit

Gross profit as a percentage of sales (“gross margin”) increased to 28.0% for the three-month period ended June 30, 2019, from 26.5% for the same period in 2018. As a percentage of sales, material and labor costs collectively decreased 0.2%, while overhead decreased 1.3%. The decrease in collective material and labor costs as a percentage of sales is primarily due to gains in manufacturing efficiencies resulting from continuous improvement initiatives and an improvement in the overall book of business. The decline in overhead as a percentage of sales was primarily due to leveraging fixed overhead costs against increased sales.

Gross margin increased to 27.2% for the six-month period ended June 30, 2019, from 25.2% for the same period in 2018. As a percentage of sales, material and labor costs collectively decreased 0.2%, while overhead decreased 1.8%. The decrease in collective material and labor costs as a percentage of sales is primarily due to gains in manufacturing efficiencies resulting from continuous improvement initiatives and an improvement in the overall book of business. The decline in overhead as a percentage of sales was primarily due to leveraging fixed overhead costs against increased sales.

Selling, General and Administrative Expenses

Selling, general, and administrative expenses (“SG&A”) increased approximately 5.2% to $7.8 million for the three-month period ended June 30, 2019, from $7.4 million for the same period in 2018. As a percentage of sales, SG&A increased slightly to 15.2% for the three-month period ended June 30, 2019, from 15.1% for the same three-month period in 2018. The increase in SG&A for the three-month period ended June 30, 2019 is primarily due to compensation increases as well as new strategic management hires at the Company’s plants.

SG&A was approximately $15.0 million for the six-month period ended June 30, 2019, compared to of $14.0 million in the same period in 2018. As a percentage of sales, SG&A remained constant at 15.2% for the six-month period ended June 30, 2019 and the same six-month period in 2018. The increase in SG&A for the six-month period ended June 30, 2019 is primarily due to compensation increases as well as new strategic management hires at the Company’s plants.

Interest Income and Expense

The Company had net interest expense of approximately $194 thousand for the three-month period ended June 30, 2019, compared to net interest expense of $397 thousand in the same period of 2018. The decrease in net interest expense was primarily due to lower debt levels.

The Company had net interest expense of approximately $425 thousand for the six-month period ended June 30, 2019, compared to net interest expense of $645 thousand in the same period of 2018. The decrease in net interest expense was primarily due to lower debt levels.

Income Taxes

The Company recorded tax expense of approximately 25.6% and 24.4% of income before income tax expense, respectively, for each of the three-month periods ended June 30, 2019 and 2018. The increase in the effective tax rate for the current period is largely due to lower share-based payment related tax benefits recorded in the current period. The Company recorded tax expense of approximately 24.0% and 24.5% of income before income tax expense, respectively, for each of the six-month periods ended June 30, 2019 and 2018. The decrease in the effective tax rate for the current period is largely due to higher share-based payment related tax benefits recorded in the current period. The Company notes the potential for volatility in its effective tax rate, as any windfall or shortfall tax benefits related to its share-based compensation plans will be recorded directly into income tax expense.

Liquidity and Capital Resources

The Company generally funds its operating expenses, capital requirements, and growth plan through internally generated cash and bank credit facilities.

Cash Flows

Net cash provided by operations for the six-month period ended June 30, 2019 was approximately $12.4 million and was primarily a result of net income generated of approximately $8.3 million, depreciation and amortization of approximately $4.1 million, share-based compensation of approximately $0.7 million, an increase in deferred taxes of approximately $0.8 million, a decrease in inventory of approximately $0.5 million, a decrease in refundable income taxes of approximately $1.6 million and an increase in deferred revenue of approximately $0.5 million. These cash inflows and adjustments to income were partially offset by an increase in accounts receivable of approximately $2.4 million primarily due to increased sales in the last two months of the second quarter of 2019 over the same period of the fourth quarter of 2018, an increase in other assets of approximately $0.2 million, a decrease in other liabilities of approximately $0.3 million and a decrease in accounts payable of approximately $1.2 million due to the timing of vendor payments in the ordinary course of business.

Net cash used in investing activities during the six-month period ended June 30, 2019 was approximately $2.8 million and was primarily the result of additions of manufacturing machinery and equipment across the Company.

Net cash used in financing activities was approximately $7.5 million during the six-month period ended June 30, 2019, resulting from repayments on the Company’s credit facility of approximately $7.7 million and payments of statutory withholding for stock options exercised and restricted stock units vested of approximately $0.3 million, partially offset by net proceeds received upon stock options exercises of approximately $0.5 million.

Outstanding and Available Debt

On February 1, 2018, the Company, as the borrower, entered into an unsecured $70 million Amended and Restated Credit Agreement (the “Amended and Restated Credit Agreement”) with certain of the Company’s subsidiaries (the “Subsidiary Guarantors”) and Bank of America, N.A., in its capacity as the initial lender, Administrative Agent, Swingline Lender and L/C Issuer, and certain other lenders from time to time party thereto. The Amended and Restated Credit Agreement amends and restates the Company’s prior credit agreement.

The credit facilities under the Amended and Restated Credit Agreement (the “Amended and Restated Credit Facilities”) consist of a $20 million unsecured term loan to the Company and an unsecured revolving credit facility, under which the Company may borrow up to $50 million.  The Amended and Restated Credit Facilities mature on February 1, 2023.  The proceeds of the Amended and Restated Credit Agreement may be used for general corporate purposes, including funding the acquisition of Dielectrics, as well as certain other permitted acquisitions. The Company’s obligations under the Amended and Restated Credit Agreement are guaranteed by the Subsidiary Guarantors.

The Amended and Restated Credit Facilities call for interest of LIBOR plus a margin that ranges from 1.0% to 1.5% or, at the discretion of the Company, the bank’s prime rate less a margin that ranges from 0.25% to zero. In both cases the applicable margin is dependent upon Company performance. Under the Amended and Restated Credit Agreement, the Company is subject to a minimum fixed-charge coverage financial covenant as well as a maximum total funded debt to EBITDA financial covenant.  The Amended and Restated Credit Agreement contains other covenants customary for transactions of this type, including restrictions on certain payments, permitted indebtedness and permitted investments.  As of June 30, 2019, there were $0.7 million in standby letters of credit outstanding drawable as a financial guarantee on worker’s compensation insurance policies. As of June 30, 2019, the applicable interest rate was approximately 3.4% and the Company was in compliance with all covenants under the Amended and Restated Credit Agreement.

Long-term debt consists of the following (in thousands):

Derivative Financial Instruments

The Company uses interest-rate-related derivative instruments to manage its exposure related to changes in interest rates on its variable-rate debt instruments. The Company does not enter into derivative instruments for any purpose other than cash flow hedging. The Company does not speculate using derivative instruments. By using derivative financial instruments to hedge exposures to changes in interest rates, the Company exposes itself to credit risk and market risk. Credit risk is the failure of the counterparty to perform under the terms of the derivative contract. When the fair value of a derivative contract is positive, the counterparty owes the Company, which creates credit risk for the Company. When the fair value of a derivative contract is negative, the Company owes the counterparty and, therefore, the Company is not exposed to the counterparty’s credit risk in those circumstances. The Company minimizes counterparty credit risk in derivative instruments by entering into transactions with carefully selected major financial institutions based upon their credit profile. Market risk is the adverse effect on the value of a derivative instrument that results from a change in interest rates. The market risk associated with interest-rate contracts is managed by establishing and monitoring parameters that limit the types and degree of market risk that may be undertaken. The Company assesses interest rate risk by continually identifying and monitoring changes in interest rate exposures that may adversely impact expected future cash flows and by evaluating hedging opportunities. The Company’s debt obligations expose the Company to variability in interest payments due to changes in interest rates. The Company believes that it is prudent to limit the variability of a portion of its interest payments. To meet this objective, in connection with the Amended and Restated Credit Agreement, the Company entered into a $20 million, 5-year interest rate swap agreement under which the Company receives three-month LIBOR plus the applicable margin and pays a 2.7% fixed rate plus the applicable margin. The swap modifies the Company’s interest rate exposure by converting the term loan from a variable rate to a fixed rate to hedge against the possibility of rising interest rates during the term of the loan. The notional amount was approximately $15.7 million at June 30, 2019. The fair value of the swap as of June 30, 2019 and December 31, 2018 was approximately $(373) thousand and $64 thousand, respectively, and is included in other liabilities and other assets, respectively. Changes in the fair value of the swap are recorded in other expense (income) and were approximately $198 thousand and $437 thousand during the three- and six-months ended June 30, 2019, and $(3) thousand and $(53) thousand, respectively during the same periods in 2018.

Future Liquidity

The Company requires cash to pay its operating expenses, purchase capital equipment, and to service its contractual obligations. The Company’s principal sources of funds are its operations and its Amended and Restated Credit Facilities. The Company generated cash of approximately $12.4 million from operations during the six-month period ended June 30, 2019. The Company cannot guarantee that its operations will generate cash in future periods. The Company’s longer-term liquidity is contingent upon future operating performance.

Throughout fiscal 2019, the Company plans to continue to add capacity to enhance operating efficiencies in its manufacturing plants. The Company may consider additional acquisitions of companies, technologies, or products that are complementary to its business. The Company believes that its existing resources, including its revolving credit facility, together with cash expected to be generated from operations and funds expected to be available to it through any necessary equipment financings and additional bank borrowings, will be sufficient to fund its cash flow requirements, including capital asset acquisitions, through the next twelve months.

Stock Repurchase Program

On June 16, 2015, the Company announced that its Board of Directors authorized the repurchase of up to $10.0 million of the Company’s outstanding common stock. Under the program, the Company is authorized to repurchase shares through Rule 10b5-1 plans, open market purchases, privately negotiated transactions, block purchases or otherwise in accordance with applicable federal securities laws, including Rule 10b-18 of the Securities Exchange Act of 1934. The stock repurchase program will end upon the earlier of the date on which the plan is terminated by the Board or when all authorized repurchases are completed. The timing and amount of stock repurchases, if any, will be determined based upon our evaluation of market conditions and other factors. The stock repurchase program may be suspended, modified, or discontinued at any time, and the Company has no obligation to repurchase any amount of its common stock under the program. Through June 30, 2019, the Company repurchased a total of 29,559 shares of its common stock under this program at a cost of approximately $587 thousand (none of which were during the six-month period ended June 30, 2019). At June 30, 2019, approximately $9.4 million was available for future repurchases of the Company’s common stock under this authorization.

Commitments and Contractual Obligations

There have been no material changes outside the ordinary course of business to our contractual obligations and commitments, as disclosed in our Annual Report on Form 10-K for the year ended December 31, 2018.

Off-Balance-Sheet Arrangements

In addition to operating leases, the Company’s off-balance-sheet arrangements include standby letters of credit which are included in the Company’s revolving credit facility. As of June 30, 2019, there was approximately $0.7 million in standby letters of credit drawable as a financial guarantee on worker’s compensation insurance policies.

As of the end of the period covered by this report (the “Evaluation Date”), the Company’s management, under the supervision and with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, performed an evaluation of the effectiveness of the design and operation of the Company’s “disclosure controls and procedures” (as defined in SEC Rule 13a-15(e) or 15d-15(e)). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the Evaluation Date, the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Securities Exchange Act of 1934, as amended, is (i) recorded, processed, summarized, and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and (ii) accumulated and communicated to the Company’s management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

An evaluation was also performed under the supervision and with the participation of our management, including the Company’s Chief Executive Officer and Chief Financial Officer, of any change in our internal control over financial reporting that occurred during our last fiscal quarter that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting. That evaluation did not identify any change in the Company’s internal control over financial reporting that occurred during our latest fiscal quarter that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

There have been no material changes from the risk factors previously disclosed in Part 1 - Item 1A of the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2018.

Issuer’s Purchases of Equity Securities

On June 16, 2015, the Company issued a press release announcing that its Board of Directors authorized the repurchase of up to $10.0 million of the Company’s outstanding common stock. Through June 30, 2019, the Company had repurchased a total of 29,559 shares of its common stock under this program at a cost of approximately $587 thousand (none of which were during the six-month period ended June 30, 2019). At June 30, 2019, approximately $9.4 million was available for future repurchases of the Company's common stock under this authorization.

__________________

# Indicates management contract or compensatory plan or arrangement.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

UFP TECHNOLOGIES, INC.

24