Annual Statements Open main menu

VICOR CORP - Annual Report: 2011 (Form 10-K)

Form 10-K
Table of Contents

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

 

þ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
  OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2011 For the fiscal year ended December 31, 2011

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
  OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                  to                 

Commission file number 0-18277

VICOR CORPORATION

(Exact name of registrant as specified in its charter)

Delaware   04-2742817

(State or other jurisdiction of

incorporation or organization)

 

(IRS employer

identification no.)

25 Frontage Road, Andover,

Massachusetts

  01810
(Address of principal executive offices)   (Zip code)

Registrant’s telephone number, including area code:

(978) 470-2900

Securities registered pursuant to Section 12(b) of the Act:

 

Common Stock, $.01 par Value

 

The NASDAQ Stock Market, LLC

(Title of Class)   (Name of Each Exchange on Which Registered)

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  þ    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated Filer ¨

  

Accelerated Filer þ

   Non-accelerated Filer ¨    Smaller Reporting Company ¨
   (Do not check if a smaller reporting company)                  

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  þ

The aggregate market value of the voting stock held by non-affiliates of the registrant was approximately $321,888,200 as of June 30, 2011.

On February 29, 2012, there were 30,043,677 shares of Common Stock outstanding and 11,767,052 shares of Class B Common Stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Company’s definitive proxy statement (the “Definitive Proxy Statement”) to be filed with the Securities and Exchange Commission pursuant to Regulation 14A and relating to the Company’s 2012 annual meeting of stockholders are incorporated by reference into Part III.

 

LOGO

 

 

 


Table of Contents

PART I

In this Annual Report on Form 10-K, unless the context indicates otherwise, references to “Vicor®,” “the Company,” “our company,” “we,” “us,” “our,” and similar references, refer to Vicor Corporation and subsidiaries.

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. The words “believes,” “expects,” “anticipates,” “intend,” “estimate,” “plans,” “assumes,” “may,” “will,” “would,” “should,” “continue,” “prospective,” “project,” and other similar expressions identify forward-looking statements. Forward-looking statements also include statements regarding: the transition of our business strategically and organizationally from serving a highly diversified customer base to serving an increasing number of large customers; the level of customer orders overall and, in particular, from large customers and the delivery lead times associated therewith; the financial and operational impact of customer changes to shipping schedules; the derivation of a portion of our sales in each quarter from orders booked in the same quarter; our ongoing development of power conversion architectures, switching topologies, packaging technologies, and products; our plans to invest in expanded manufacturing capacity and the timing thereof; our belief regarding currency risk being mitigated because of limited foreign exchange fluctuation exposure; our continued success depending in part on our ability to attract and retain qualified personnel; our belief cash generated from operations and the total of our cash and cash equivalents will be sufficient to fund operations for the foreseeable future; our intentions regarding the declaration and payment of cash dividends; our intentions regarding protecting our rights under our patents; and our expectation that no current litigation or claims will have a material adverse impact on its financial position or results of operations. These statements are based upon our current expectations and estimates as to the prospective events and circumstances that may or may not be within our control and as to which there can be no assurance. Actual results could differ materially from those implied by forward-looking statements as a result of various factors, including our ability to: hire and retain key personnel; develop and market new products and technologies cost effectively and on a timely basis; leverage our new technologies in standard products to promote market acceptance of our new approach to power system architecture; leverage design wins into increased product sales; continue to meet requirements of key customers and prospects; enter into licensing agreements increasing our market opportunity and accelerating market penetration; realize significant royalties under such licensing agreements; achieve sustainable bookings rates for our products across both markets and geographies; improve manufacturing and operating efficiencies; successfully enforce our intellectual property rights; successfully defend outstanding litigation; and maintain an effective system of internal controls over financial reporting, including our ability to obtain required financial information for investments on a timely basis, our ability to assess the value of assets, including illiquid investments, and the accounting therefor. These and other factors that may influence actual results are described in this Annual Report on Form 10-K, including but not limited to those described under Part I, Item I — “Business,” under Part I, Item 1A — “Risk Factors,” under Part I, Item 3 — “Legal Proceedings,” and under Part II, Item 7 — “Management’s Discussion and Analysis of Financial Condition and Results of Operations”. The discussion of our business contained herein, including the identification and assessment of factors that may influence actual results, may not be exhaustive. Therefore, the information presented should be read together with other documents we file with the Securities and Exchange Commission from time to time, including Forms 10-Q and 8-K, which may supplement, modify, supersede or update the factors discussed in this Annual Report on Form 10-K. We do not undertake any obligation to update any forward-looking statements as a result of future events or developments.

 

ITEM 1. BUSINESS

Overview

We design, develop, manufacture and market modular power components and complete power systems. Power systems are incorporated into virtually all electronic equipment. In equipment utilizing Alternating Current (“AC”) voltage from a primary source (for example, a wall outlet), a power system converts AC voltage

 

2


Table of Contents

into the stable Direct Current (“DC”) voltage necessary to power subsystems and/or individual applications or “loads”. In many electronic devices, this DC voltage may be further converted to one or more lower voltages required by a range of loads. In equipment utilizing DC voltage from a primary source (for example, a generator or battery pack), the initial DC voltage frequently requires further conversion to one or more lower voltages. Because numerous applications requiring different DC voltages and varied power ratings may exist within an electronic device, and system power architectures themselves vary, we offer an extensive range of products and accessories in a myriad of application-specific configurations.

Since our founding, our product strategy has been driven by innovations in design, largely enabled by our focus on the development of differentiated technologies, which often are implemented in proprietary semiconductor circuitry. Many of our products incorporate a high frequency electronic power conversion technology called zero current / zero voltage switching (“ZCS/ZVS”), which enabled the design of DC-DC converter modules that were much smaller and more efficient than conventional alternatives. Emphasizing the superior power density and performance advantages of this technology, our primary product strategy since our founding has been to offer a comprehensive range of component-level building blocks to configure a power system specific to a customer’s needs. Since introducing and popularizing the encapsulated “brick” during the 1980s, our product focus has been on high density DC-DC converters, which provide the isolation, transformation, regulation, filtering, and/or input protection necessary to power and protect sophisticated electronic loads. A secondary and highly complementary product strategy has been to incorporate our component-level building blocks into complete power systems representing turnkey AC-DC and DC-DC solutions for our customers’ power needs.

Our product strategy is focused increasingly on the next generation of component-level building block, the V*I Chip module and derivations thereof. An important element of our product strategy is expanding the applicability of V*I Chip technology with broadened product offerings and innovative packaging solutions. The VI Chip module incorporates our latest advances in switching topologies and other proprietary power conversion innovations. We believe V*I Chip technology offers unprecedented power conversion density (i.e., the output power in Watts as a function of the size of the component in cubic inches), performance (i.e., benchmarks related to the capabilities of the component, such as conversion efficiency), and flexibility (i.e., the ability of our customers to implement a broad range of possible configurations).

Our product roadmap is focused on the development of a full line of products capable of delivering power conversion and power management solutions from the AC source (e.g., the wall outlet) to the DC point of load. Our Picor subsidiary, which develops microcontroller solutions enabling our innovations in switching topology, is pursuing a merchant strategy focused on high performance low voltage products for application at or near the point of load. These products complement our other component offerings, thereby allowing us to offer a complete solution from AC conversion to DC transformation and regulation at the point of load.

The applications in which these next-generation power conversion and power management products are used are in the higher-performance, higher-power segments of the power systems market, and our customers generally are global original equipment manufacturers (“OEMs”).

Our business segments are organized by key product lines:

 

   

Our Brick Business Unit (“BBU”) segment designs, develops, manufactures and markets modular power converters in two formats: our well-established encapsulated modules, known as bricks, and our newer line of modular power converters that incorporate our V*I Chip technology into innovative packaging, which we market as VI Brick modules. The BBU also designs, develops, manufactures and markets a line of “configurable” products, which are complete power supplies assembled using our modular power components. The BBU includes the operations of our Westcor division, which is focused only on AC-input configurable products, the operations of Vicor Custom Power, which is our turnkey custom power solutions business, and Vicor Japan Company, Ltd. (“VJCL”), our majority-owned Japanese subsidiary.

 

3


Table of Contents
   

Our V*I Chip Business Unit (“V*I Chip”) consists of V*I Chip Corporation, a wholly-owned subsidiary that designs, develops, manufactures and markets a range of advanced power conversion components, including those that enable our Factorized Power Architecture (“FPA”). In 2003, we introduced FPA, a new power system architecture based on an array of proprietary power conversion innovations building upon our long-standing leadership in the design of power conversion technologies. We believe FPA provides power system designers enhanced performance at a lower cost than can be attained with conventional power architectures. As V*I Chip modules and FPA represent innovative alternatives to such conventional products and architectures, we established a separate business unit to enable the organizational focus necessary to support early adopters of these disruptive technologies.

 

   

Our Picor® Business Unit (“Picor”) consists of Picor Corporation, a majority-owned subsidiary of Vicor. Picor is a fabless (i.e., it utilizes third parties to manufacture its products) designer, developer, and marketer of high performance integrated circuits and related products for use in a variety of power system applications. Picor develops these products to be incorporated into Vicor’s products, to be sold as a complement to our products, or for sale to third parties for separate applications. Much of the differentiation of our BBU and V*I Chip products has been a result of implementation of our power conversion innovations in proprietary semiconductor circuitry. Because of the considerable design expertise embodied in this captive organization and the potential for success as a merchant vendor of an expanding portfolio of proprietary products, we established Picor as a separate business unit to enable organizational focus and to facilitate a distinct go-to-market strategy.

Our products are sold worldwide to customers ranging from smaller, independent manufacturers of highly specialized electronic devices to larger OEMs and their contract manufacturers. The customer applications we address include, in alphabetical order, aerospace and defense electronics, enterprise and high performance computing, industrial automation, telecommunications and networking infrastructure, test and measurement instrumentation, and vehicles and transportation.

Vicor B.V., a wholly-owned subsidiary incorporated in the Netherlands, serves as a European distribution center. VLT, Inc. is our wholly-owned licensing subsidiary. VICR Securities Corporation is our wholly-owned subsidiary established to hold certain investment securities.

We are headquartered in Andover, Massachusetts, where our manufacturing facility is located. V*I Chip Corporation also is headquartered in Andover, Massachusetts. Our Westcor division has a design and assembly facility in Sunnyvale, California. VJCL, which is engaged in sales and customer support activities exclusively for the Japanese market, is located in Tokyo, Japan. Our six Vicor Custom Power locations are geographically distributed around the United States. We have customer support and engineering offices, which we call Technical Support Centers, in the United States, the United Kingdom, France, Germany, Italy, and Hong Kong, China. Picor Corporation is headquartered in North Smithfield, Rhode Island.

All of the above named entities are consolidated in the financial statements presented herein.

We were incorporated in Delaware in 1981. Shares of our Common Stock were listed on the NASDAQ National Market System in April 1990 under the ticker symbol VICR, and we completed an initial public offering of our shares in May 1991.

We maintain a website with the address www.vicorpower.com and make available free of charge through this website our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 (the “Exchange Act”), as soon as reasonably practicable after we electronically file such material with, or furnish such material to, the Securities and Exchange Commission. The information contained on our website is not a part of, nor incorporated by reference into, this Annual Report on Form 10-K and shall not be deemed “filed” under the Exchange Act.

 

4


Table of Contents

Market Background, Product Trends and Vicor Strategy

The market for power supplies and their enabling components continues to evolve in response to advancing technologies and corresponding changes in customer requirements. Similarly, we adapted our strategy to address evolving market challenges and opportunities. Many of the ongoing changes in the market, particularly in those segments in which we compete, have been characterized by improvement in product performance (e.g., power conversion efficiency), reduction in product form factor (i.e., size), and increased design flexibility (i.e., the ability of customers to address their power requirements with a broad range of alternative solutions). Product trends have been characterized by the disaggregation of the functions of power components such as DC-DC converters, thereby driving further improvement in overall power supply performance, further reduction in form factor, and greater flexibility in the way designers implement power supply solutions.

In 1984, we introduced an enhancement of the standardized, high-density power converter to the market: the fully-encapsulated brick, utilizing our ZCS/ZVS technology, in standardized dimensions of 4.6” x 2.4” x 0.5”. Our innovative, patented technology provided superior efficiency and overall performance in a small form factor, while full encapsulation provided full shielding from environmental influences and enhanced thermal performance characteristics. Such thermal performance enhancement has been critical to the differentiated performance of our power converters, as the by-product of voltage conversion is heat, which must be dissipated in order to assure the performance of the converter itself and the overall system to which it is delivering power.

In response to market and technology trends and changes in our customer requirements, we have implemented a strategy addressing both the realities of the current power conversion marketplace and our vision of the long-term direction of that marketplace. Our strategy involves maintaining a viable, profitable legacy business, while investing in the next generation of power management components.

Our early technical and performance leadership contributed to the development of an image in the market as a power component innovator. The BBU experienced strong revenue growth and robust profitability during the 1980s and 1990s, as important markets for our products expanded. However, a significant amount of our revenue was derived from the telecommunications infrastructure market and, when that market collapsed in the early 2000s, we had to reassess our product portfolio and overall competitive positioning. Many of our domestic competitors faced the same circumstances and reoriented their strategies to serve high volume applications of large OEMs. In doing so, they moved much of their manufacturing from the United States to lower cost countries where the contract manufacturers used by their OEM customers were based. We chose not to follow these competitors, remained a domestic manufacturer, and shifted our competitive positioning to one based on “mass customization”, thereby offering customers a wider range of possible solutions than those offered by our competitors.

As a part of our repositioning, we invested significantly in new product designs that emphasized low cost and flexible manufacturing, as well as the plant equipment and information technology necessary to support such low cost and flexible manufacturing, as well as shorter delivery lead times. We also modified our go-to-market strategy to emphasize serving lower volume customers requiring higher value solutions. As such, today our product portfolio is extremely broad, while our customer base and the market segments we serve are far more diverse than prior to the change in our go-to-market strategy. Our mass customization model allows us to profitably meet the specific design and volume requirements of numerous, relatively low volume customers, while avoiding the costs associated with maintaining extensive inventories of finished goods. Our decision to not pursue higher volume commodity opportunities constrained our growth during the economic recovery from 2004 into 2008, but our profitability during this period benefited from our value-added approach. We believe this approach has contributed to reduced volatility of our financial performance during the current period of economic uncertainty, as our customers rely on us for power conversion solutions they generally cannot obtain from our volume-oriented, commodity-focused competitors.

At the same time we undertook to reposition the BBU with mass customization, we announced our vision for the future of component-based power conversion: FPA and V*I Chip modules. Since our founding, our products have been based on advanced, highly-differentiated designs. Much of our intellectual property is

 

5


Table of Contents

patented or otherwise proprietary to us. However, as is typical across the information technology and electronics markets, the segments in which we have competed matured relatively quickly and became characterized by product commoditization and price competition. Given our extensive experience with power conversion technologies and our understanding of trends in both technology and our markets, we concluded the appropriate complement to maintaining our legacy business would be to seek to redefine the competitive landscape in the long-term in targeted market segments with our innovative, flexible new power distribution architecture and our next generation of advanced designs appropriate for applications requiring highly differentiated performance (i.e., conversion efficiency) and power density.

Picor is a highly complementary element of our strategy to redefine the competitive landscape in the long term. Many of the differentiated capabilities of our Brick and V*I Chip products have been a result of implementation of our power conversion innovations in proprietary semiconductor circuitry. Most notably, proprietary, highly advanced microcontroller circuits developed by Picor are found in many of our most successful switching power components. While the majority of Picor’s activities to date have involved supplying integrated circuits for internal use, Picor’s long-term strategy is to become a merchant vendor of innovative power management circuitry, whether in individual packages, multi-chip modules, or subassemblies. Picor’s product roadmap includes the development of integrated power management products targeted at lower power applications. As such, Picor’s current and planned products represent a complement to FPA and V*I Chip modules.

An important element of our strategy is to protect our competitive leadership with domestic and foreign patents and patent applications that cover our products and much of their enabling technologies. We believe our competitive leadership is further protected by proprietary trade secrets associated with our use of certain components and materials of our own design, as well as our significant experience with manufacturing, packaging and testing these complex devices.

We continue to believe traditional power architectures, in the longer run, may not provide the performance necessary to address future power system requirements, given the trends toward lower bus and load voltages, higher currents, more and diverse on-board voltages, and the higher speeds and performance demands of numerous complex loads. Our overall strategy is to develop differentiated products to address these trends, while providing competitively superior performance and reliability at a lower overall cost.

Our Products

Our website, www.vicorpower.com, sets forth detailed information describing all of products and the applications for which they may be used. The information contained on our website is not a part of, nor incorporated by reference into, this Annual Report on Form 10-K and shall not be deemed “filed” under the Exchange Act.

Our principal product lines are:

Bricks: Modular Power Converters

Brick DC-DC power converters are well-established as an important enabling component of conventional power systems architectures. The BBU currently offers seven families of high power density, component-level DC-DC power converters: the VI-200, VI-J00, MI-200, MI-J00, Maxi, Mini and Micro families. Designed to be mounted directly on a printed circuit board chassis using contemporary manufacturing processes, each brick family is a comprehensive set of products offered in a wide range of input voltage (10 to 425 Volts DC) and output power (10 to 600 Watts). This allows end users to select power component products appropriate to their individual applications. The product families differ in maximum power ratings, performance characteristics, package size and, in certain cases, characteristics specific to the targeted market.

All of our traditional brick modules are encapsulated with a dielectric, elastomeric, thermally conductive material, thereby providing electrical insulation, thermal conductivity, and environmental protection of the electronic circuitry.

 

6


Table of Contents

Our Custom Module Design System (“CMDS”), a core component of the Vicor PowerBench tool suite on our website, is a proprietary system enabling our customers to specify on-line, and verify in real time, the performance and attributes of its DC-DC converters. Not merely a product configuration tool like those offered by competitors, the CMDS enables the comprehensive design of DC-DC converters in all of our established brick form factors (i.e., full, half and quarter size), using patented web-based technology. CMDS is an important element of our mass customization strategy.

The VI Brick combines the superior technical attributes of our V*I Chip technology with robust packaging offering superior thermal characteristics and facilitating a range of board mounting alternatives. VI Brick models include high current density / low voltage DC-DC converters, a wide range of highly efficient bus converters, and individual models for both regulation and transformation. We continue to focus our product development efforts within the BBU on the design of VI Brick modules, notably focusing on VI Brick implementations of V*I Chip’s innovative PFM and DCM modules.

In February 2011, we announced the introduction of the IBC048 series of VI Brick Intermediate Bus Converters, which utilize our patented Sine Amplitude Converter topology, the ZCS/ZVS resonant converter technology powering our V*I Chip bus converter line. Switching at approximately 10 times the frequency of competing square wave converters, our VI Bricks cut transient response time by a factor of 10, eliminating the need for external bulk capacitors, while offering double the power density and half the conversion loss of competitive devices. These products are available as drop-in replacements for industry standard eighth-brick and quarter-brick 5:1 and 4:1 intermediate bus converters. The product line includes 300, 500, 650 and 750 Watt models.

In February 2012, we added a proprietary IBC Power Simulation tool, what we believe to be an industry-first online simulation capability providing a means for power systems designers to interactively model the electrical and thermal performance of intermediate bus converters in application — specific operating conditions and thermal environments, to the Vicor PowerBench tool suite. We believe this simulation tool reduces time-consuming bench-level manual evaluation, streamlining design and development cycles. The ability to track changes across simulations with different parametric settings is intended to accelerate design optimization.

Accessory Power System Components

Accessory power system components, used with our component-level power converters, integrate other important functions of the power system, facilitating the design of complete power systems by interconnecting several modules. These other functions include input filtering, power factor correction, transient protection and AC line rectification. In general, our broad line of proprietary accessory components are used to condition and/or filter the input and output voltages of the modular power components and, therefore, represents an important complement to our converter component lines.

Examples of accessory products include our VI-HAM (Harmonic Attenuator Module), a universal-AC-input, power-factor-correcting front end for use with compatible DC-DC power converters, and our VI-AIM (AC Input Module), which provides input filtering, transient protection and rectification of the AC line.

Configurable Products

Utilizing our modular power components as core elements, we have developed several configurable product families that provide complete power solutions configured to a customer’s specific needs. These products exploit the benefits and flexibility of the modular approach to offer higher performance, higher power densities, lower costs, and faster delivery than many competitive offerings. Configurable products are designed, developed and manufactured by the BBU, which offers a range of AC-DC and DC-DC products, by its Westcor division, which focuses on high-power AC-DC power supplies, and by VJCL, which offers configurable power supplies addressing the specific requirements of Japanese customers.

 

7


Table of Contents

Most information technology, process control, and industrial electronic products operate directly off of AC lines and, as such, require circuitry to convert AC line voltage into the required DC voltage. Our configurable AC-DC power systems, the FlatPAC, VIPAC Power System, and LoPAC families, incorporate front-end AC-DC circuitry subassemblies, thereby providing a complete power solution from AC line input to one or more DC outputs. These configurable products are characterized by their low-profile design and are configurable in a range of sizes and outputs up to 1,500 Watts.

Many telecommunications switching, transportation and defense electronic products are powered from central DC sources (e.g., generators or banks of batteries). Our configurable DC-DC power systems, the VIPAC Array, ComPAC, and MegaMod families, also are characterized by a low-profile design, including rugged, compact assemblies for chassis-mounted, bulk power applications.

Our highest power configurable product line, the MegaPAC family, is also among our most flexible solutions. A MegaPAC consists of a fan-cooled chassis with up to 10 slots into which are placed ConverterPAC modules, which incorporate our brick power conversion modules, allowing for a broad range of customer-specific configurations. The MegaPAC itself can be configured to accept either AC or DC inputs, and output power can be as high as 4,000 Watts with up to 20 outputs.

The VIPAC family of power systems is a class of user defined, integrated modular power solution that leverages the latest advances in Maxi, Mini, and Micro DC-DC converter technology and modular front ends. VIPAC combines application specific front end units, a choice of advantageous chassis styles and, in AC input versions, remotely located hold-up capacitors to provide fast, flexible and highly reliable power solutions for a wide range of demanding applications.

The web-based Vicor Computer Assisted Design (“VCAD”) tool, a component of Vicor PowerBench, can be utilized by the customer to specify and verify, in real time, that customer’s desired configuration of our VIPAC family of configurable products from a broad range of inputs, outputs, packaging and optional features. Similarly, our web-based Vicor System Product Online Configurator (“VSPOC”), also a component of Vicor PowerBench, allows customers to configure and order Westcor AC-DC power supplies.

Customer Specific Power System Products

Certain customers rely on us to design, develop and manufacture customized power systems to meet performance and/or form factor requirements that cannot be met with off-the-shelf system solutions. By utilizing our power components as building-blocks in developing these custom power systems, we have been able to meet such customers’ needs with reliable, high power density, turnkey solutions. These low-volume, high value-add products, besides meeting customers’ specific requirements, frequently are designed to function reliably in the harsh environments associated with aerospace and defense applications.

We pursue custom opportunities through our Vicor Custom Power network, which consists of six regional design, assembly and customer support locations. Of the six locations, one is a division, three are either wholly-owned or majority-owned subsidiaries, and two are less than 50%-owned subsidiaries.

V*I Chip Products

We have pioneered an innovative new board level power architecture, FPA, which separates (or “factorizes”) the basic functions of DC-DC power conversion (voltage transformation, regulation, and isolation) into separate power components called V*I Chip modules. Our V*I Chip modules represent the next generation of modular power components, providing power systems designers the ability to address increasingly challenging requirements. With each new generation of microprocessor, application specific integrated circuit, and memory, the trend has been toward lower voltages, higher currents, higher speeds and more on-board voltages. System designers must contend with a range of lower voltages, improve overall power system efficiency, and deliver the solution in an ever-smaller form factor.

 

8


Table of Contents

We believe FPA provides power system designers superior power density, conversion efficiency, transient responsiveness, noise performance, reliability, and design flexibility at a lower overall cost than attained with conventional board level power architectures. We currently offer three V*I Chip modules for implementation of FPA designs: the BCM (Bus Converter Module), an intermediate bus converter; the PRM® (Pre-Regulator Module), a non-isolated regulator; and the VTM® (Voltage Transformation Module), an isolated current multiplier. All three modules are offered in full (i.e., 1.1 square inch) and half (i.e., 0.57 square inch) modules.

The BCM provides an isolated, unregulated intermediate bus voltage, at efficiencies up to 96%, to power non-isolated converters at the point-of-load from a narrow range DC input. The PRM is a non-isolated regulator, operating at up to 97% efficiency, capable of both bucking (i.e., reducing) and boosting (i.e., increasing) an input voltage and providing a regulated, adjustable output voltage or “factorized bus”. VTMs are designed to meet the demands of advanced microprocessor and memory applications at the point of load with fixed ratio voltage transformation with extremely fast transient response, while providing isolation from input to output.

We have successfully deployed BCM, PRM and VTM modules in FPA implementations in several demanding application categories for which they are well suited, including high performance computing, advanced test and measurement, and defense electronics.

As addressed above in the context of its use in a VI Brick product, V*I Chip also offers the PFM, an isolated AC-DC voltage transformer, enabled by V*I Chip’s Adaptive Cell topology, a high frequency, soft switching technology derived from our earlier advances in ZCS/ZVS topologies. The PFM offers active power factor correction in a single stage for use in implementations of FPA or other board-level power architectures across the worldwide range of AC supply voltage levels. The PFM has dimensions of 1.92” x 1.91” x 0.37”, being approximately twice size of a full size BCM, PRM or VTM module. A complementary module under development, the FEM (Front End Module), provides AC current rectification and filtering, as well as transient voltage suppression, when required. We believe the extremely thin profile of the FEM-PFM solution will allow much greater flexibility and creativity in end-product design, while its differentiated performance should appeal to worldwide customers seeking to maximize the power efficiency of their own products. The PFM is indicative of our renewed commitment to the AC-DC segment of the power conversion market, and is an important element of our strategy to offer differentiated power components from the AC source to the point of load.

During the fourth quarter of 2011, we began sampling our latest V*I Chip innovation, the DCM, an isolated, regulated DC-DC voltage transformer offering very high conversion efficiency across a wide range of voltage inputs. Like the PFM, the DCM is a low profile, light weight solution enabled by our Adaptive Cell topology. We are targeting the DCM for use in demanding high voltage applications, such as electric vehicles, for which its small size, low weight, high power density, and high efficiency are especially well-suited.

The PFM and DCM modules are Vicor’s new flagship products for our vision of a far-reaching power component methodology. Across major electronic markets, requirements for power systems operating from AC- or DC-input voltages will be addressed more predictably and cost-effectively with modular components that support efficient power distribution and dense power conversion with the requisite flexibility and scalability.

Picor Products

Picor designs, develops, and markets high performance integrated circuits and related products for use in a variety of power system applications. Picor develops these products to be incorporated into our BBU and V*I Chip modules, to be sold as a complement to our products, or for sale to third parties for separate applications. We believe Picor is competitively differentiated among vendors of power path management, filter, converter solutions targeted at a wide range of industries and applications, as our products have been designed with emphasis on high performance operation, board space savings, and reduced design complexity.

Picor’s portfolio of merchant products includes a range of Cool-ORing® full-function Active ORing solutions and discrete Active ORing controllers, as well as the QuietPower® range of output and input

 

9


Table of Contents

electromagnetic interference filters, differentiated by their small, surface mount System-in-Package (SiP) and low cost. Notable recent product introductions include the Cool-Switch® line of electronic circuit breaker, load disconnect switch solutions (launched in 2011) and the Cool-Power® module, a DC-DC converter delivering 60 Watts of output power in half the size of competitive solutions (launched in 2010). This module combines voltage transformation, output regulation and isolation in a high density, surface mount device utilizing V*I Chip assembly and packaging technology.

In 2011, Picor announced the future direction of its Cool-Power product line, which will be expanded in 2012 to include non-isolated SiP switching regulator solutions with a very high level of silicon integration, allowing for lower cost and design reuse across the product line. Picor’s proprietary switching topologies allow for very high switching frequencies that will drive differentiated performance for lower power buck, boost, and buck-boost applications.

MIL-COTS Products

We offer versions of our commercial-off-the-shelf brick converters and accessories, configurable power supplies, and V*I Chip modules meeting certain specification standards established by the U.S. Department of Defense. Such “MIL-COTS” products meet the performance and reliability requirements associated with use in harsh and demanding environments.

Sales and Marketing

In 2011, we reorganized our Sales and Marketing organization, consolidating management at the corporate level and employing new professionals to lead our newly unified go-to-market strategy and expanded marketing communications effort. This unified go-to-market strategy is focused on certain defined market segments that are the responsibility of our newly formed Business Creation Teams (“BCTs”). Each BCT is focused on the requirements of customers in specific market segments and consists of product marketing, applications engineering, field application engineering, and regional sales personnel.

Specific sales activities are managed by a staff of Area Sales Directors, Regional and National Account Sales Managers, and sales personnel in the following locations: our world headquarters in Andover, Massachusetts; a Technical Support Center in Lombard, Illinois; our Westcor division in Sunnyvale, California; Vicor Custom Power locations in Cedar Park (Austin), Texas, Milwaukie (Portland), Oregon, and Oceanside (San Diego), California; our subsidiary in Tokyo, Japan; and our Technical Support Centers in Munich, Germany, Camberley, Surrey, England, Milan, Italy, Paris, France, and Hong Kong, China.

Because of the technically complex nature of our products, we maintain a staff of Field Applications Engineers to support our sales activities. Field Application Engineers provide direct technical sales support worldwide by reviewing new applications and technical matters with existing and potential customers. Product Line Engineers, located in our Andover headquarters, support field application engineers assigned to all of our locations.

In 2011, we also announced the adoption of a multi-tiered distribution model. We traditionally have sold our products in North America and South America through a network of independent sales representative organizations and in other areas of the world through independent non-stocking distributors. We announced a stocking distribution relationship with Future Electronics Incorporated in June 2011 and with Digi-Key Corporation in January 2012. While initial dollar and unit volumes sold through these distributors are small to date, we anticipate these relationships will become meaningful contributors to our long-term revenue growth.

In 2010, we introduced an electronic commerce capability through our website, www.vicorpower.com. Registered customers in the U.S., Canada and certain European countries are now able to purchase prototype quantities of selected products online. We intend to expand our online capability in the near future to include customers from other countries.

 

10


Table of Contents

We also sell directly to customers through Vicor Express, an in-house distribution group. Through advertising and periodic mailing of its catalogs, Vicor Express generally offers customers rapid delivery on small quantities of certain standard products. Through Vicor B.V., Vicor Express operates in Germany, France, Italy and England.

We generally warrant our products for a period of two years.

Applications and Customers

The applications in which our power conversion and power management products are used are in the higher-performance, higher-power segments of the power systems market. Our products are sold worldwide to customers ranging from smaller, independent manufacturers of highly specialized electronic devices to global OEMs and their contract manufacturers. Industries served include aerospace and defense electronics, enterprise and high performance computing, industrial equipment and automation, telecommunications and network infrastructure, and vehicles and transportation markets.

During 2011, one customer (AcBel Polytech, Inc.) accounted for approximately 14.9% of net revenues. For the year ended December 31, 2010, two customers accounted for approximately 12.3% and 11.5% of net revenues, respectively. For the year ended December 31, 2009, no single customer accounted for more than 10% of our net revenues.

International sales, as a percentage of total net revenues, were approximately 57% in 2011, 49% in 2010, and 41% in 2009, respectively.

Backlog

As of December 31, 2011, we had a backlog of approximately $54,200,000 compared to $78,900,000 on December 31, 2010. Backlog is comprised of orders for products for which shipment is scheduled within the next 12 months. A portion of our sales in any quarter is, and will continue to be, derived from orders booked in the same quarter.

Research and Development

As a basic element of our long-term strategy, we are committed to the continued advancement of power conversion technology and power component product development. We invested approximately $39,000,000, $36,000,000, and $31,600,000 in research and development in 2011, 2010, and 2009, respectively. Investment in research and development represented approximately 15.4%, 14.4%, and 16.0% of net revenues in 2011, 2010, and 2009, respectively. We intend to continue to invest a significant percentage of revenues in research and development activities.

Manufacturing and Quality Assurance

Our principal manufacturing processes consist of assembly of electronic components onto printed circuit boards, automatic testing of components, wave, reflow and infrared soldering of assembled components, encapsulation of converter subassemblies, final environmental stress screening of certain products and product test using automatic test equipment.

We continue to pursue a manufacturing strategy based upon the phased acquisition and/or fabrication, qualification and integration of automated manufacturing equipment to reduce manufacturing costs, increase product quality and reliability and enable rapid and effective expansion of capacity, as needed. We intend to make continuing investments in manufacturing equipment, particularly for our V*I Chip and VI Brick products and replacement of manufacturing equipment utilized by the BBU.

 

11


Table of Contents

Components and materials used in our products are purchased from a variety of vendors. Most of the components are available from multiple sources. In instances of single source items, we maintain levels of inventories we consider to be appropriate to enable meeting the delivery requirements of customers. Incoming components, assemblies and other parts are subjected to several levels of inspection procedures.

Our compliance with applicable environmental laws has not had a material effect on our financial condition or operating results.

Product quality and reliability are critical to our success and, as such, we emphasize quality and reliability in our design and manufacturing activities. We follow industry best practices in manufacturing and are compliant with ISO 9001 certification standards (as set forth by the International Organization for Standardization). Our quality assurance practices include rigorous testing and, as necessary, burn-in of our products using automated equipment.

Competition

The power conversion industry is highly competitive. It remains highly fragmented, despite significant consolidation during the prior decade. Numerous power supply manufacturers target market segments and applications similar to those we target. Several of these competitors have significantly greater financial and marketing resources and longer operating histories than we do.

With the BBU, our strategy is largely based on differentiated responsiveness to customer requirements enabled by our mass customization capabilities. We believe we have a strong competitive position, particularly with customers who need small, high density power system solutions requiring a variety of input-output configurations. We compete on the basis of differentiation, offering a broad product line and mass customization abilities. We also compete by emphasizing technical innovation, product performance, and service and technical support. We believe the principal competitive variables in the market segments in which the BBU competes are price, performance, and the level of service and technical support offered.

With V*I Chip, our strategy is largely based on differentiated products offered to, at least during the early adoption of such products, a limited number of larger potential customers well-positioned to benefit from the advantages offered by our products (e.g., global original equipment manufacturers in computing, networking, and test and measurement). V*I Chip currently competes with vendors of power component solutions, many of which are the manufacturers with which the BBU competes. In the coming years, we anticipate a significantly broadened market for V*I Chip, as awareness of the advantages of V*I Chip spreads and a broader audience of potential customers is reached. We also anticipate the introduction of the PFM and DCM concepts will accelerate adoption of our broadened V*I Chip product line, as we will be well-positioned to offer comprehensive AC-DC and DC-DC solutions across a wider range of applications.

Picor and, to a lesser extent, V*I Chip compete with suppliers of integrated circuits for power conversion applications, many of which have significantly greater financial and marketing resources and longer operating histories. We believe Picor is developing a strong competitive position based on innovative semiconductor design and SiP packaging. Based on Picor’s expanding product roadmap, we anticipate Picor will experience more direct competition with these larger suppliers, as we target their customers with our increasingly silicon-centric power conversion solutions.

Patents and Intellectual Property

We believe our patents afford advantages by building fundamental and multilayered barriers to competitive encroachment upon key features and performance benefits of our principal product families. Our patents cover the fundamental conversion topologies used to achieve the performance attributes of our converter product lines; converter array architectures; product packaging design; product construction; high frequency magnetic structures; as well as automated equipment and methods for circuit and product assembly.

 

12


Table of Contents

We have been issued 109 patents in the United States (which expire between 2012 and 2029). We also have a number of patent applications pending in the United States, Europe and the Far East. We intend to vigorously protect our rights under these patents. Although we believe patents are an effective way of protecting our technology, there can be no assurances that our patents will prove to be enforceable.

Licensing

In addition to generating revenue from product sales, licensing is an element of our strategy for building worldwide product and technology acceptance and market share. In granting licenses, we generally retain the right to use our patented technologies and manufacture and sell our products in all licensed geographic areas and fields of use. Licenses are granted and administered through our wholly-owned subsidiary, VLT, Inc., which owns our patents. Revenues from licensing arrangements have not exceeded 10% of our consolidated revenues in any of the last three fiscal years.

Employees

As of December 31, 2011, we had 1,017 full time employees and 28 part time employees.

We believe our continued success depends, in part, on our ability to attract and retain qualified personnel. Although there is strong demand for qualified personnel, we have not to date experienced difficulty in attracting and retaining sufficient engineering and technical personnel to meet our needs (see Part I, Item 1A — “Risk Factors”).

None of our employees are subject to a collective bargaining agreement.

 

13


Table of Contents
ITEM 1A. RISK FACTORS

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Actual results could differ materially from those projected in the forward-looking statements as a result of, among other factors, the risk factors set forth below.

Our future operating results are difficult to predict and are subject to fluctuations.

Our future operating results, including revenues, gross margins, operating expenses and net income (loss), have fluctuated on a quarterly and annual basis, are difficult to predict, and may be materially affected by a number of factors, many of which are beyond our control, including:

 

   

the effects of adverse economic conditions in the United States and international markets, especially in light of the continued challenges in global credit and financial markets;

 

   

changes in customer demand for our products and for end products that incorporate our products;

 

   

the timing of our new product announcements or introductions, as well as those by our competitors;

 

   

our ability to effectively coordinate changes in the mix of products we manufacture and sell, while managing our ongoing transition in organizational focus from traditional brick power components to our new V*I Chip, VI Brick and Picor products;

 

   

our ability to provide and maintain a high level of support to an increasing number of large, high volume customers;

 

   

the level of demand and purchase orders from our customers, and our ability to adjust to changes in demand and purchase order patterns;

 

   

changes in order lead times and our “turns” volumes (i.e., the volumes of purchase orders received and shipped within an individual quarter);

 

   

the timing, delay or cancellation of significant customer orders and our ability to manage inventory;

 

   

the ability of our third party suppliers, subcontractors and manufactures to supply us with sufficient quantities of high quality products or components, on a timely basis;

 

   

the effectiveness of our efforts to reduce product costs and manage operating expenses;

 

   

our ability to utilize our manufacturing facilities at efficient levels, maintaining production capacity and manufacturing yields;

 

   

the ability to hire, retain and motivate qualified employees to meet the demands of our customers;

 

   

intellectual property disputes;

 

   

potential significant litigation-related costs;

 

   

costs related to compliance with increasing worldwide environmental and other regulations; and

 

   

the effects of public health emergencies, natural disasters, security risk, terrorist activities, international conflicts and other events beyond our control.

As a result of these and other factors, we cannot assure you that we will not experience significant fluctuations in future operating results on a quarterly or annual basis. In addition, if our operating results do not meet the expectations of investors, the market price of our Common Stock may decline.

Our stock price has been volatile and may fluctuate in the future.

The trading price of our Common Stock has and may continue to fluctuate significantly. Such fluctuations may be influenced by many factors, including:

 

   

the recent unprecedented volatility of the financial markets;

 

14


Table of Contents
   

uncertainty regarding the prospects of domestic and foreign economies;

 

   

uncertainty regarding domestic and international political conditions, including tax policies;

 

   

actual or anticipated fluctuations in our operating performance;

 

   

the performance and prospects of our major customers;

 

   

announcements by us or our competitors of significant new products, technical innovations or litigation;

 

   

investor perception of our company and the industry in which we operate;

 

   

the absence of earnings estimates and supporting research by investment analysts;

 

   

the liquidity of the market for our Common Stock;

 

   

the uncertainty of the declaration and payment of future cash dividends on our Common Stock; and

 

   

the concentration of ownership of our Common Stock by Dr. Vinciarelli, our Chairman of the Board, Chief Executive Officer, and President.

Public stock markets have recently experienced extreme price and trading volume volatility. This volatility significantly and negatively affected the market prices of securities of many technology companies, including the market price of our Common Stock in late 2008, early 2009, and again in the second half of 2011. The return of such volatility could result in broad market fluctuations that could materially and adversely affect the market price of our Common Stock for indefinite periods. In addition, fluctuations in our stock price, volume of shares traded, and changes in our trading multiples may make our stock attractive to certain categories of investors who often shift funds into and out of stocks rapidly, exacerbating price fluctuations in either direction.

The ownership of our Common Stock is concentrated between Dr. Vinciarelli and a limited number of institutional investors. Dr. Vinciarelli owned, as of December 31, 2011, 9,675,480 shares of our Common Stock, as well as 11,023,648 shares of our Class B Common Stock (convertible on a one-for-one basis into Common Stock), together representing 50.5% of total issued and outstanding shares. Certain institutional investors have been long-term owners of our Common Stock and held in aggregate, as of September 30, 2011 (the most recent reporting date for institutional holders), over 15% of our issued and outstanding shares. Accordingly, the market float for our Common Stock and average daily trading volumes are relatively small, which can negatively impact investors’ ability to buy or sell shares of our Common Stock in a timely manner.

We do not actively communicate with investment analysts and, as a consequence, there are no earnings estimates or supporting research coverage of our company. Because operating results have fluctuated on a quarterly and annual basis, investors may have difficulty in assessing our current and future performance.

In the past, we have declared and paid cash dividends on our Common Stock. The payment of dividends is based on the periodic determination by the Board of Directors that we have adequate capital to fund anticipated operating requirements and that excess cash is available for distribution to shareholders via a dividend. We have no formal policy regarding dividends and, as such, investors cannot make assumptions regarding the possibility of future dividend payments nor the amounts and timing thereof.

Dr. Vinciarelli owns 93.7% of our issued and outstanding Class B shares, which possess 10 votes per share. (Dr. Estia J. Eichten, a member of our Board of Directors, owns the majority of the balance of Class B shares issued and outstanding.) As such, Dr. Vinciarelli, controlling in aggregate 81.3% of share voting power, has effective control of the governance of the Company.

The ongoing disruptions in the global economy, as well as continued uncertainty in global financial markets, could materially and adversely affect our business and consolidated operating results.

Global economic conditions remain uncertain. Further disruption and deterioration in inter-related global economic conditions may reduce customer purchases of our products, thereby reducing our revenues and

 

15


Table of Contents

earnings. In addition, such adverse conditions may, among other things, result in increased price competition for our products, increased risk of excess and obsolete inventories, increased risk in the collectability of our accounts receivable from our customers, increased risk in potential reserves for doubtful accounts and write-offs of accounts receivable, and higher operating costs as a percentage of revenues.

The ongoing European debt crisis and related financial restructuring efforts have contributed to the instability of global financial markets and regional economies. The debt crisis in Europe could cause further deterioration of the value of the Euro relative to the U.S. dollar, thus reducing the purchasing power of our European customers. If a European economic recession occurs in 2012, we could experience a significant decline in revenue and profitability, as European activities represented over one third of our international revenue in 2011.

China recently has experienced a deceleration of its rapid rise to be the world’s second largest economy. While robust, high single-digit growth is expected for China’s economy in 2012, this expectation does not take into consideration the impact of a European recession on China’s export activity. Also, certain industrial sectors may experience further slowing of growth or actual contraction, as the Chinese government shifts priorities to meet state objectives. Such shifts or continued deceleration of Chinese economic growth may have a material and adverse affect on our revenue and profitability in the Asia-Pacific region, which represented, exclusive of Japan, approximately one half of our international revenue in 2011.

VJCL, which serves Japan exclusively and represented less than 10% of our international revenue in 2011, experienced relatively stable performance for the year, despite poor domestic economic conditions and the natural disasters of March 2011. While the Japanese economy has structural weaknesses, it is expected to expand slightly in 2012, despite the global risks to its export-oriented economy. However, recession in Europe, further deterioration of the Euro relative to the Yen, or reduced export demand from China could have a material and adverse affect on our revenue and profitability in Japan.

Any of these inter-related conditions and circumstances individually, or in combination, could materially and adversely affect our business and operating results.

We compete with many companies possessing far greater resources.

Some of our competitors have greater financial, manufacturing, technical, sales and marketing resources than we have. We compete with domestic and foreign manufacturers of integrated power supplies and power conversion components. With the growth of our V*I Chip and Picor product lines, we increasingly are competing with global manufacturers of power management products. Competition is generally based on design and quality of products, product performance, features and functionality, and product pricing, availability and capacity, with the relative importance of these factors varying among products, markets and customers. Existing or new competitors may develop products or technologies that more effectively address the demands of our customers and markets with enhanced performance, features and functionality or lower cost. If we fail to continue to develop and commercialize leading-edge technologies and products that are cost effective and maintain high standards of quality, and introduce them to the market on a timely basis, our competitive position and results of operations could be materially adversely affected.

Our future success increasingly depends upon our ability to develop and market differentiated, leading-edge power conversion products for larger customers, potentially contributing to lengthy product development and sales cycles that may result in significant expenditures before revenues are generated. Our future operating results are dependent on the growth in such customers’ businesses and on our ability to profitably develop and deliver products meeting customer requirements.

The power system industry and the industries in which many of our customers operate are characterized by intense competition, rapid technological change, product obsolescence and price erosion for mature products, each of which could have an adverse effect on our results of operations. We are following a strategy based on the

 

16


Table of Contents

development of differentiated products addressing what we believe to be the long-term limitations of traditional power architectures. The development of such new products is often a complex, time-consuming and costly process involving significant investment in research and development, with no assurance of return on investment. There can be no assurance we will be able to develop and introduce new and improved products in a timely or efficient manner or new and improved products, if developed, will achieve market acceptance.

Our future success depends substantially upon customer acceptance of our innovative products. As we have been in the early stages of market penetration for these products, we have experienced lengthy periods during which we have focused our product development efforts on the specific requirements of a limited number of large customers, followed by further periods of delay before meaningful purchase orders are received. These lengthy development and sales cycle times increase the possibility a customer may decide to cancel or change product plans, which could reduce or eliminate our sales to that customer. As a result, we may incur significant product development expenses, as well as significant sales and marketing expenses, before we generate the related revenues for these products. Furthermore, we may never generate the anticipated revenues from a product after incurring such expenses if our customer cancels or changes its product plans.

We are shifting our market strategy to focus on larger opportunities with global manufacturers. Our growth is therefore dependent on the growth in the sales of these customers’ products as well as their own development of new products. If we fail to anticipate changes in our customers’ businesses and their changing product needs or successfully identify and enter new markets, our results of operations and financial position could be negatively impacted. We cannot assure you the markets we serve will grow in the future, our existing and new products will meet the requirements of these markets, or we can maintain adequate gross margins or profits in these markets.

Further reductions of spending by the U.S. Department of Defense or a pronounced shift in the nature of such spending may negatively influence our operating results.

Customers in the defense electronics segment have contributed a meaningful portion of the BBU’s revenue to date. Such revenues represented approximately 29% of BBU revenue in 2011, down from approximately 37% in 2010. Defense electronics customers have represented the majority of revenue for Vicor Custom Power, which designs and manufactures sophisticated power solutions for primarily C4I (Command, Control, Communications, Computing, and Intelligence) applications. Recent reductions in Department of Defense spending, particularly those associated with reduced troop deployment in Iraq, have resulted in declines in orders and revenue from certain defense contractors. As the Department of Defense re-prioritizes spending to address both current requirements and federal budget constraints, we may experience further declines in orders and revenue from defense contractors.

Customers in defense electronics typically place orders with us based on the requirements of certain platform programs that may continue over several years, and the conclusion or termination of such programs may negatively influence our operating results. Two such programs, cumulatively representing approximately $8 million and $28 million of revenue for Vicor Custom Power in 2011 and 2010, respectively, were substantially concluded by the first quarter of 2011. While we currently do not have any single program approaching the magnitude of these two programs, our operating results may be negatively impacted by the termination of any program by the Department of Defense.

Our operating results recently have been influenced by a limited number of customers, and our future results may be similarly influenced.

Since it was established, our V*I Chip subsidiary has derived a substantial portion of its revenue from one customer, whether through sales directly to the customer or indirectly to the customer’s contract manufacturers. Similarly, our Picor subsidiary has derived a substantial portion of its third-party revenue from a limited number of customers. This concentration of revenue is a reflection of the relatively early stage of adoption of the technologies, architectures and products offered by these subsidiaries, and their targeting of market leading

 

17


Table of Contents

innovators as initial customers. Our new sales and marketing strategy is, in part, focused on accelerating the adoption of V*I Chip and Picor products by a diversified customer base across a number of identified market segments. However, we cannot assure you our new strategy will be successful and such diversification of customers will be achieved.

Growth in the V*I Chip segment and the Vicor Custom Power business within the BBU over the last several years has come from either a limited number of customers or from a limited number of significant customer programs. A decline in or deferral of demand from one or several of these large customers or the discontinuation of certain programs, or declines in our other end-user markets in general, could have a material adverse impact on our results of operations. Vicor Custom Power experienced a significant revenue decrease in 2011 due to the completion of two major programs in the first part of 2011. In addition, several large V*I Chip customers, due to uncertain conditions in their own businesses, deferred placing purchase orders with us or deferred delivery of scheduled product shipments during 2011. As a result, we incurred additional costs associated with managing our inventory levels and scheduling our production activity.

We rely on third-party vendors and subcontractors for supply of components and assemblies and, therefore, cannot control the availability or quality of such components and assemblies.

We depend on third party vendors and subcontractors to supply components and assemblies used in our products, some of which are supplied by a single vendor. In the third and fourth quarters of 2011, we experienced shortages of certain semiconductor components, supplied by a single vendor, and incurred additional and unexpected costs to address the shortages, while experiencing delays in production and shipping. If suppliers or subcontractors cannot provide their products or services on time or to our specifications, we may not be able to meet the demand for our products and our delivery times may be negatively affected. In addition, we cannot directly control the quality of the products and services provided by third parties. In order to grow, we likely will need to identify and qualify new suppliers and subcontractors to supplant or replace existing suppliers and subcontractors. This may cause disruptions in production, delays in shipping, or increases in prices paid to third-parties.

We may not be able to procure necessary key components for our products, or we may purchase excess raw material inventory or unusable inventory, possibly impacting our operating results.

The power systems industry, and the electronics industry as a whole, can be subject to pronounced business cycles and otherwise subject to sudden and sharp changes in demand. Our success, in part, is dependent on our ability to forecast and procure inventories of raw materials and components to match production schedules and customer delivery requirements. Many of our products, notably V*I Chip modules and Picor components, require raw materials supplied by a limited number of vendors and, in some instances, a single vendor. During periods of demand growth, key materials required to build our products may become unavailable in the timeframe required for us to meet our customers’ needs. Our inability to secure sufficient materials and components to build products for our customers could negatively impact our sales and operating results. We may choose to mitigate this risk by increasing the levels of inventory for certain raw materials and components. Such increased inventory levels may increase the potential risk for excess and obsolescence should our forecasts fail to materialize or if there are negative factors impacting our customers’ end markets, leading to order cancellation. If we purchase excess inventory or determine certain inventory is unusable, we may have to record additional inventory reserves or write-off the unneeded inventory, which could have a material adverse effect on our gross margins and on our operating results.

Our revenues and profits may not increase enough to offset the expense of additional production capacity.

We have made significant additions to our manufacturing equipment and capacity over the past several years, including equipment for both our new V*I Chip products and for BBU products. During 2010 and 2011, we added equipment to the V*I Chip production lines that more than doubled production capacity. We have also replaced certain equipment and added new, more efficient equipment for certain processes on the BBU

 

18


Table of Contents

production lines. If overall revenue levels do not increase enough to offset the increased fixed costs, or if there is deterioration in our overall business, our future operating results could be adversely affected. In addition, asset values could be impaired if the additional capacity is underutilized for an extended period of time, resulting in impairment charges that could have a material adverse effect on our financial position and results of operations.

If we were unable to use our manufacturing facility in Andover, Massachusetts, we would not be able to manufacture for an extended period of time.

All modular power components, whether for direct sale to customers or for sale to our subsidiaries and divisions for incorporation into their respective products, are manufactured at our Andover, Massachusetts, production facility. Substantial damage to this facility due to fire, natural disaster, power loss or other events could interrupt manufacturing. Any prolonged inability to utilize all or a significant portion of this facility could have a material adverse effect on our results of operations.

We are exposed to foreign economic, political and other risks.

For the years ended December 31, 2011, 2010 and 2009, our net revenues from sales outside the United States were 57%, 49%, and 41%, respectively, of the Company’s total net revenues. We expect international sales will continue to be a significant component of total sales, since many of the global manufacturers we target as customers increasingly utilize offshore contract manufacturers and rely upon those contract manufacturers to place orders directly with us. We also expect international revenue from our distributors to increase.

While our currency risks are limited, as our sales are denominated in dollars worldwide, with the exception of Japan, our international activities expose us to special risks including, but not limited to, regulatory requirements, economic and political instability, transportation delays, foreign currency controls and market fluctuations, trade barriers and tariffs, and foreign exchange rates. In addition, our international customers’ business may be negatively affected by the ongoing crisis in the global credit and financial markets. Sudden or unexpected changes in the foregoing could have a material adverse effect on our operating results.

We may be unable to adequately protect our proprietary rights, which may limit our ability to compete effectively.

We operate in an industry in which the ability to compete depends on the development or acquisition of proprietary technologies that must be protected to preserve the exclusive use of such technologies. We devote substantial resources to establish and protect our patents and proprietary rights, and we rely on patent and intellectual property law to protect such rights. This protection, however, may not prevent competitors from independently developing products similar or superior to our products. We may be unable to protect or enforce current patents, may rely on unpatented technology that competitors could restrict, or may be unable to acquire patents in the future, and this may have a material adverse affect on our competitive position. In addition, the intellectual property laws of foreign countries may not protect our rights to the same extent as those of the United States. We have been and may need to continue to defend or challenge patents. We have incurred and expect to incur significant costs in and devote significant resources to these efforts which, if unsuccessful, may have a material adverse effect on our operating results and financial position.

We may face intellectual property infringement claims that could be costly to resolve.

The power supply industry is characterized by vigorous protection and pursuit of intellectual property rights. We may in the future receive communications from third parties asserting that our products or manufacturing processes infringe on a third party’s patent or other intellectual property rights. In January 2011, we were named in a complaint for patent infringement filed by SynQor, Inc. (see Part I — Item 3 — Legal Proceedings). In the event a third party makes a valid intellectual property claim against us and a license is not available to us on commercially reasonable terms, or at all, we could be forced to either redesign or stop production of products incorporating that technology, and our operating results could be materially and adversely affected. In addition,

 

19


Table of Contents

litigation may be necessary to defend us against claims of infringement, and this litigation could be costly and divert the attention of key personnel. An adverse outcome in these types of matters could have a material adverse impact on our operating results and financial condition.

We may face legal claims and litigation from product warranty or other claims that could be costly to resolve.

We may in the future encounter legal action from customers, vendors or others concerning product warranty or other claims. We generally offer a two-year warranty from the date title passes from us for all of our standard products. We invest significant resources in the testing of our products; however, if any of our products contain defects, we may be required to incur additional development and remediation costs, pursuant to our warranty policies. These issues may divert our technical and other resources from other product development efforts and could result in claims against us by our customers or others, including liability for costs associated with product returns, which may adversely impact our operating results. If any of our products contains defects, or has reliability, quality or compatibility problems, our reputation may be damaged, which could make it more difficult for us to sell our products to existing and prospective customers and could adversely affect our operating results.

Our ability to successfully implement our business strategy may be limited if we do not retain our key personnel and attract and retain skilled and experienced personnel.

Our success depends on our ability to retain the services of our executive officers. The loss of one or more members of senior management could materially adversely affect our business and financial results. In particular, we are dependent on the services of Dr. Vinciarelli, our founder, Chairman of the Board, Chief Executive Officer, and President. The loss of the services of Dr. Vinciarelli could have a material adverse effect on our development of new products and on our results of operations. In addition, we depend on highly skilled engineers and other personnel with technical skills that are in high demand and are difficult to replace. Our continued operations and growth depend on our ability to attract and retain skilled and experienced personnel in a very competitive employment market. If we are unable to attract and retain these employees, our ability to successfully implement our business strategy may be harmed.

Disruption of our information technology infrastructure could adversely affect our business.

We depend heavily on information technology infrastructure to achieve our business objectives, particularly our computer-integrated manufacturing processes that control all aspects of our operations in our manufacturing facility in Andover, Massachusetts. If a problem occurs impairing this infrastructure, the resulting disruption could impede our ability to record or process orders, manufacture and ship in a timely manner, or otherwise carry on business in the normal course. While we carry business interruption insurance that would mitigate losses to an extent, such insurance may be insufficient to compensate us for the potentially significant losses. Any such events, if prolonged, could have a material and adverse effect on our operating results and financial condition.

Our computing and communications systems are designed to protect us from network disruptions and security breaches. However, we are subject to network disruptions or security breaches caused by computer viruses, illegal break-ins or malicious hacking, sabotage, acts of vandalism by third parties, or terrorism. Our security measures or those of our third party service providers may not detect or prevent such network disruptions or security breaches. Any such compromise of our systems security could result in the unauthorized publication of our confidential business or proprietary information, cause an interruption in our operations, result in the unauthorized release of customer or employee data, result in a violation of privacy or other laws, expose us to a risk of litigation or damage our reputation, which could have a material and adverse affect on our operating results and financial condition, as well as significantly harm our business.

If we fail to maintain an effective system of internal controls or discover material weaknesses in our internal controls over financial reporting, we may not be able to report our financial results accurately or timely or detect fraud, which could have a material adverse effect on our business.

An effective internal control environment is necessary for us to produce reliable financial reports and is an important part of our effort to prevent financial fraud. Section 404 of the Sarbanes-Oxley Act of 2002 requires

 

20


Table of Contents

our management to report on, and our independent registered public accounting firm to attest to, the effectiveness of our internal control structure and procedures for financial reporting. We have an ongoing program to perform the system and process evaluation and testing necessary to comply with these requirements and to continuously improve and remediate internal controls over financial reporting.

While management evaluates the effectiveness of our internal controls on a regular basis, these controls may not always be effective. There are inherent limitations on the effectiveness of internal controls, including collusion, management override, and failure in human judgment. In addition, control procedures are designed to reduce rather than eliminate business risks. In the event that our Chief Executive Officer, Chief Financial Officer, or independent registered public accounting firm determines that our internal controls over financial reporting are not effective as defined under Section 404, we may be unable to produce reliable financial reports or prevent fraud, which could materially adversely affect our business. In addition, we may be subject to sanctions or investigation by government authorities or self-regulatory organizations, such as the Securities and Exchange Commission or The NASDAQ Stock Market, LLC. Any such actions could affect investor perceptions of the Company and result in an adverse reaction in the financial markets due to a loss of confidence in the reliability of our financial statements, which could cause the market price of our common shares to decline or limit our access to capital.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

 

ITEM 2. PROPERTIES

Our corporate headquarters building in Andover, Massachusetts, which we own, provides approximately 90,000 square feet of office space for our sales, marketing, engineering and administration personnel. We also own a building of approximately 230,000 square feet in Andover, Massachusetts, which houses all Massachusetts manufacturing activities. Our Westcor division owns and occupies a building of approximately 31,000 square feet in Sunnyvale, California.

All other domestic and foreign facilities are leased from third-party lessors on arms’ length terms.

 

ITEM 3. LEGAL PROCEEDINGS

As disclosed in prior filings, on January 28, 2011, SynQor, Inc. (“SynQor”) filed a complaint for patent infringement against Ericsson, Inc. (“Ericsson”), Cisco Systems, Inc. (“Cisco”) and us in U.S. District Court for the Eastern District of Texas (“the Texas Action”). This immediately followed a complaint filed by us on January 26, 2011 in U.S. District Court for the District of Massachusetts, in which we sought a declaratory judgment that our bus converter products do not infringe any valid claim of certain of SynQor’s U.S. patents, and that the claims of those patents are invalid. With respect to us, SynQor’s complaint alleges our products, including, but not limited to, unregulated bus converters used in intermediate bus architecture power supply systems, infringe certain SynQor patents. SynQor seeks, amongst other items, an injunction against further infringement and an award of unspecified compensatory and enhanced damages, interest, costs and attorney fees. On February 8, 2011, SynQor filed a motion for preliminary injunction seeking an order enjoining us from manufacturing, using, selling, and offering for sale in the United States and/or importing into the United States certain identified unregulated bus converters, as well as any other bus converters not significantly different from those products. On February 17, 2011, we withdrew our Massachusetts action without prejudice to allow the litigation to proceed in Texas. On May 16, 2011, SynQor announced it was withdrawing its motion for preliminary injuction against us. On September 20, 2011, SynQor filed an amended complaint in the Texas Action. The amended complaint repeated the allegations of patent infringement against us contained in SynQor’s original complaint, and included additional patent infringement allegations with respect to U.S. Patent No. 8,023,290 (“ ‘290 patent”), which was issued on that day. As with SynQor’s original complaint, the amended complaint alleged that our products, including but not limited to our unregulated bus converters used in

 

21


Table of Contents

intermediate bus architecture power supply systems, infringed the asserted patents. On October 4, 2011, we filed an answer and counterclaims to SynQor’s amended complaint, in which we allege the ‘290 patent is unenforceable because it was procured through inequitable conduct before the U.S. Patent and Trademark Office and seek damages against SynQor for SynQor’s unfair and deceptive trade practices and tortious interference with prospective economic advantage in connection with SynQor’s allegations of patent infringement against us. We do not believe any of our products, including our unregulated bus converters, infringe any valid claim of the SynQor patents, either alone or when used in an intermediate bus architecture implementation. We believe SynQor’s claims lack merit and, therefore, we continue to vigorously defend ourselves against SynQor’s patent infringement allegations.

During the third quarter of 2009, we entered into a release and settlement agreement with a vendor over alleged product performance issues with certain products the vendor had sold to us. We received a payment of $750,000 in consideration for the settlement, which is recorded in “Gain from litigation-related and other settlements, net” in the accompanying Consolidated Statement of Operations.

On February 22, 2007, we announced an agreement in principle with Ericsson, Inc., the U.S. affiliate of LM Ericsson, to settle a lawsuit brought by Ericsson against us in California state court. Under the terms of the settlement agreement entered into on March 29, 2007, after a court ordered mediation, we paid $50,000,000 to Ericsson, of which $12,800,000 was reimbursed by our insurance carriers. Accordingly, we recorded a net loss of $37,200,000 from the litigation-related settlements in the fourth quarter of 2006. We have been seeking further reimbursement from its insurance carriers. On November 14, 2008, a jury in the United States District Court for the District of Massachusetts found in favor of us in a lawsuit against certain of its insurance carriers with respect to the Ericsson settlement. The jury awarded $17,300,000 in damages to us, although the verdict is subject to challenge in the trial court and on appeal. Both parties filed certain motions subsequent to the ruling and, on March 2, 2009, the judge in the case rendered his decision on the subsequent motions, reducing the jury award by $4,000,000. On March 26, 2009, the U.S. District Court, District of Massachusetts (the “Court”) issued its judgment in the matter, affirming the award of $13,300,000, plus prejudgment interest from the date of breach on March 29, 2007 through March 26, 2009, the date of judgment in the amount of approximately $3,179,000. The insurance carriers have filed their appeal to this total judgment in the amount of approximately $16,479,000. No final and collectible judgment yet has been entered by the court as of December 31, 2011 and therefore no amounts are reflected in the accompanying consolidated financial statements.

Our decision to enter into the settlement followed an adverse ruling by the court in January 2007 in connection with a settlement between Ericsson and co-defendants Exar Corporation (“Exar”) and Rohm Device USA, LLC (“Rohm”), two of our component suppliers prior to 2002. Our writ of mandate appeal of this ruling was denied in April, 2007. In September 2007, we filed a notice of appeal of the court’s decision upholding the Ericsson-Exar-Rohm settlement. In December 2007, the court awarded Exar and Rohm amounts for certain statutory and discovery costs associated with this ruling. As such, we accrued $240,000 in the second quarter of 2007, included in “(Gain) loss from litigation-related and other settlements, net” in the Consolidated Statements of Operations, of which $78,000 of the award was paid in the second quarter of 2008. On February 9, 2009, the Court of Appeals issued its opinion affirming the judgment for Exar and Rohm in full. During the third quarter of 2009, we completed negotiations with Exar and Rohm, resulting in separate settlement agreements calling for a final payment to Exar of $70,000 and no additional payment due Rohm. As a result of the settlements, we reversed a remaining excess accrual of approximately $96,000 in the third quarter of 2009, which is recorded in “Gain from litigation-related and other settlements, net” in the accompanying Consolidated Statement of Operations.

In addition, we are involved in certain other litigation and claims incidental to the conduct of its business. While the outcome of lawsuits and claims against us cannot be predicted with certainty, we do not expect any current litigation or claims to have a material adverse impact on our financial position or results of operations.

 

ITEM 4. MINE SAFETY DISCLOSURES

Not Applicable.

 

22


Table of Contents

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS

Our Common Stock is listed on The NASDAQ Stock Market, LLC, under the trading symbol “VICR.” Shares of our Class B Common Stock are not registered with the Securities and Exchange Commission, are not listed on any exchange nor traded on any market, and are subject to transfer restrictions under our Restated Certificate of Incorporation, as amended.

The following table sets forth the quarterly high and low sales prices for the Common Stock as reported by The NASDAQ Stock Market for the periods indicated:

 

2011

   High      Low  

First Quarter

   $ 17.58      $ 14.05  

Second Quarter

     17.40        14.81  

Third Quarter

     16.74        8.15  

Fourth Quarter

     10.69        7.00  

2010

   High      Low  

First Quarter

   $ 14.31      $ 7.98  

Second Quarter

     16.24        10.87  

Third Quarter

     16.35        11.98  

Fourth Quarter

     19.50        14.65  

As of February 29, 2012, there were 217 holders of record of our Common Stock and 16 holders of record of our Class B Common Stock. These numbers do not reflect persons or entities that hold their shares in nominee or “street name” through various brokerage firms.

Dividend Policy

We do not have a policy mandating the declaration of dividends at any particular time or on a regular basis. Dividends are declared at the discretion of our Board of Directors and depend on actual cash from operations, our financial condition and capital requirements, the recommendation of our management, and any other factors the Board of Directors may consider relevant.

On July 22, 2011, the Company’s Board of Directors approved a cash dividend of $0.15 per share of the Company’s Common Stock. The total dividend of approximately $6,272,000 was paid on August 31, 2011 to shareholders of record at the close of business on August 9, 2011.

From time to time, excess cash held at the subsidiary level is transferred to the Company via cash dividends declared by the subsidiary. Because we own less than 100% of the common stock of certain subsidiaries, such subsidiary dividends can result in payments to outside shareholders of those subsidiaries. During the year ended December 31, 2011, two subsidiaries paid a total of $2,000,000 in cash dividends, of which $1,310,000 was paid to the Company and $690,000 was paid to outside shareholders (i.e., paid to certain subsidiary employees who own common stock in the subsidiary). During the year ended December 31, 2010, three subsidiaries paid a total of $5,457,000 in cash dividends, of which $4,905,000 was paid to the Company and $552,000 was paid to outside shareholders. Dividends paid to outside shareholders are accounted for as a reduction in noncontrolling interest.

 

23


Table of Contents

Issuer Purchases of Equity Securities

 

Period

   Total
Number
of Shares
(or Units)
Purchased
     Average Price Paid
per Share (or Unit)
     Total Number of
Shares (or Units)
Purchased as Part
of Publicly
Announced Plans
or Programs
     Maximum
Number (of
Approximate
Dollar Value) of
Shares (or Units)
that May Yet Be
Purchased Under
the Plans or
Programs
 

October 1 — 31, 2011

         —                   $ —                         —                 $ 8,541,000  

November 1 — 30, 2011

         —                   $ —                 —                 $ 8,541,000  

December 1 — 31, 2011

         —                   $ —                 —                 $ 8,541,000  
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

         —                   $ —                 —                 $ 8,541,000  
  

 

 

    

 

 

    

 

 

    

 

 

 

In November 2000, our Board of Directors authorized the repurchase of up to $30,000,000 of our Common Stock (the “November 2000 Plan”). The November 2000 Plan authorizes us to make such repurchases from time to time in the open market or through privately negotiated transactions. The timing and amounts of stock repurchases are at the discretion of management based on its view of economic and financial market conditions. We did not repurchase shares of Common Stock during the year ended December 31, 2011.

 

24


Table of Contents

Stockholder Return Performance Graph

The graph set forth below presents the cumulative, five-year stockholder return for each of the Company’s Common Stock, the Standard & Poor’s 500 Index (“S&P 500 Index”), a value-weighted index made up of 500 of the largest, by market capitalization, listed companies, and the Standard & Poor’s SmallCap 600 Index (“S&P SmallCap 600 Index”), a value-weighted index of 600 listed companies with market capitalizations between $200,000,000 and $1,000,000,000.

The graph assumes an investment of $100 on December 31, 2006, in each of our Common Stock, the S&P 500 Index, and the S&P SmallCap 600 Index, and assumes reinvestment of all dividends. The historical information set forth below is not necessarily indicative of future performance.

Comparison of Five Year Cumulative Return

Among Vicor Corporation, S&P 500 Index

and S&P SmallCap 600 Index

 

LOGO

 

     2006     2007     2008     2009     2010     2011  

Vicor Corporation

  $ 100.00      $ 144.25      $ 62.85      $ 88.43      $ 158.95      $ 78.17   

S&P 500 Index

  $ 100.00      $ 105.50      $ 66.45      $ 84.04      $ 96.71      $ 98.75   

S&P SmallCap 600 Index

  $ 100.00      $ 99.70      $ 68.72      $ 86.29      $ 109.00      $ 110.10   

 

25


Table of Contents
ITEM 6. SELECTED FINANCIAL DATA

The following selected consolidated financial data with respect to our statements of operations for the years ended December 31, 2011, 2010, and 2009, and with respect to our balance sheets as of December 31, 2011 and 2010, are derived from our Consolidated Financial Statements, which appear elsewhere in this report and which have been audited by Grant Thornton LLP, our independent registered public accounting firm. The following selected consolidated financial data with respect to our statements of operations for the years ended December 31, 2008 and 2007, and with respect to our balance sheets as of December 31, 2009, 2008 and 2007 are derived from our Consolidated Financial Statements, which are not included herein.

 

     Year Ended December 31,  

Statement of Operations Data

   2011      2010      2009      2008     2007  
     (In thousands, except per share data)  

Net revenues

   $ 252,968      $ 250,733      $ 197,959      $ 205,368     $ 195,827  

Income (loss) from operations

     13,686        29,122        4,773        (1,142     1,071  

Consolidated net income (loss)

     9,309        33,539        4,093        (1,778     5,874  

Net income attributable to noncontrolling interest

     466        214        1,295        1,817       539  

Net income (loss) attributable to Vicor
Corporation

     8,843        33,325        2,798        (3,595     5,335  

Net income (loss) per share — basic and diluted attributable to Vicor Corporation

     0.21        0.80        0.07        (0.09     0.13  

Weighted average shares — basic

     41,797        41,700        41,665        41,651       41,597  

Weighted average shares — diluted

     41,856        41,772        41,671        41,651       41,687  

Cash dividends per share

   $ 0.15      $ 0.30      $       $ 0.30     $ 0.30  
     As of December 31,  

Balance Sheet Data

   2011      2010      2009      2008     2007  
     (In thousands)  

Working capital

   $ 124,386      $ 105,454      $ 74,791      $ 65,297     $ 114,924  

Total assets

     208,141        204,912        180,577        171,922       192,458  

Total liabilities

     23,431        25,900        24,511        20,496       23,978  

Total equity

     184,710        179,012        156,066        151,426       168,480  

 

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

We design, develop, manufacture and market modular power components and complete power systems based upon a portfolio of patented technologies. We sell our products primarily to customers in the higher-performance, higher-power segments of the power systems market, including aerospace and defense electronics, enterprise and high performance computing, industrial equipment and automation, telecommunications and network infrastructure, and vehicles and transportation. On June 22, 2011, we announced the adoption of a multi-tiered distribution model, consisting of direct sales, regional manufacturers’ representatives in North and South America, and a distribution partnership with Future Electronics Incorporated, a leading electronic components distributor. In January 2012, we announced a similar distribution arrangement with Digi-Key Corporation, a leading Internet-based electronic components distributor. Revenues to date under these new arrangements have not been material. We will continue to utilize independent distributors to serve international markets. Export sales as a percentage of total revenues were approximately 57% in 2011, 49% in 2010 and 41% in 2009, respectively.

We have organized our business segments according to our key product lines. The BBU segment designs, develops, manufactures and markets our modular power converters and configurable products, and also includes the operations of our Westcor division, the six entities comprising Vicor Custom Power, and the BBU operations of VJCL. The V*I Chip segment includes V*I Chip Corporation, which designs, develops, manufactures and markets our FPA products. The V*I Chip segment also includes the V*I Chip business conducted through VJCL.

 

26


Table of Contents

Picor designs, develops, manufactures and markets integrated circuits and related products for use in a variety of power management and power system applications. Picor develops these products to be sold as part of Vicor’s products or to be sold to third parties for separate applications.

For the year ended December 31, 2011, revenues increased 0.9% to $252,968,000 from $250,733,000 in 2010. Gross margin decreased to $106,694,000 from $114,520,000 in 2010. Gross margin, as a percentage of revenue, decreased to 42.2% in 2011 from 45.7% in 2010. We reported net income in 2011 of $8,843,000 as compared to $33,325,000 in 2010, and a diluted income per share of $0.21 in 2011, as compared to a diluted income per share of $0.80 in 2010. The decrease in gross margin (dollars and percentage) was primarily due to a shift in product mix to a higher proportion of lower-margin V*I Chip products, along with lower volumes of higher-margin BBU component products and Vicor Custom Power products. During the third and fourth quarters of 2010, respectively, the Company recorded non-recurring, non-cash tax benefits of $5,158,000, or approximately $0.12 per diluted share, and $1,159,000, or approximately $0.03 per diluted share, respectively, due to the release of portions of its deferred tax valuation allowance (See Note 14).

Backlog, representing the total of purchase orders received for which product has not yet been shipped, was approximately $54,200,000 at the end of 2011 as compared to $78,900,000 at the end of 2010.

Operating expenses for 2011 increased $7,610,000, or 8.9%, to $93,008,000 from $85,398,000 in 2010, due to increases in selling, general and administrative expenses of $4,624,000 and research and development expenses of $2,986,000. The key increases in selling, general and administrative expenses were compensation expenses of $3,212,000, legal fees of $1,910,000, outside services of $608,000, travel expenses of $324,000, and depreciation and amortization of $185,000, partially offset by decreases in commissions expense of $974,000, advertising expenses $664,000, and audit and tax fees of $161,000. The key increases in research and development expenses were compensation expenses of $2,604,000, project and pre-production materials of $365,000, depreciation and amortization of $256,000, deferred costs of $217,000, and computer expenses of $119,000, partially offset by decreases in outside services of $447,000, supplies expenses of $154,000, and employment recruiting of $117,000.

“Other income, net” decreased $151,000 to $346,000 in 2011 from $497,000 in 2010. The primary reasons for the decline were decreases in gains on disposal of equipment of $227,000, interest income of $183,000, and an increase in foreign currency losses of $168,000, partially offset by an increase in credit gains on available for sale securities of $448,000.

In 2011, depreciation and amortization totaled $11,005,000 and capital additions were $7,466,000, compared to $10,222,000 and $12,103,000, respectively, for 2010.

Inventories increased by approximately $263,000, or 0.7%, to $35,752,000 at the end of 2011 as compared to $35,489,000 at the end of 2010. The increase was primarily due to increases in V*I Chip and Picor inventories of approximately $1,069,000 and $127,000, respectively, partially offset by a decrease in BBU inventories of approximately $933,000.

The following table sets forth certain items of selected consolidated financial information as a percentage of net revenues for the years ended December 31. This table and the subsequent discussion should be read in conjunction with the selected financial data and the Consolidated Financial Statements and related footnotes contained elsewhere in this report.

 

     Year Ended December 31,  
     2011     2010     2009  

Net revenues

     100.0     100.0     100.0

Gross margin

     42.2     45.7     44.2

Selling, general and administrative expenses

     21.4     19.7     24.2

Research and development expenses

     15.4     14.4     16.0

Income before income taxes

     5.5     11.8     2.8

 

27


Table of Contents

Critical Accounting Policies and Estimates

Management’s Discussion and Analysis of Financial Condition and Results of Operations discusses our Consolidated Financial Statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, management evaluates its estimates and judgments, including those related to revenue recognition, allowance for doubtful accounts, product warranties, inventories, investments, intangible assets, income taxes, impairment of long-lived assets, share-based compensation, contingencies and litigation. Management bases its estimates and judgments on historical experience, knowledge of current conditions and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

Allowance for Doubtful Accounts

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments, based on assessments of customers’ credit-risk profiles and payment histories. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

Inventories

We employ a variety of methodologies to estimate allowances for its inventory for estimated obsolescence or unmarketable inventory, based upon its known backlog and historical usage, and assumptions about future demand and market conditions. For BBU products produced at our Andover facility, our principal manufacturing location, the model used is based upon a comparison of on-hand quantities to projected demand, such that amounts of inventory on hand in excess of a three-year projected usage are fully reserved. Since V*I Chip and Picor products are still at a relatively early stage, a one-year projected usage assumption is used. While we have used our best efforts and believe we have used the best available information to estimate future demand, due to uncertainty in the economy and our business and the inherent difficulty in predicting future demand, it is possible that actual demand for our products will differ from our estimates. If actual future demand or market conditions are less favorable than those projected by management, additional inventory reserves for existing inventories may need to be recorded in future periods.

Fair Value Measurements

We account for certain financial assets at fair value, defined as the price that would be received to sell an asset or paid to transfer a liability (i.e., an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. As such, fair value is a market-based measurement that is determined based on assumptions that market participants would use in pricing an asset or liability. If management made different assumptions or judgments, material differences in fair values could occur.

Long-Term Investments

Our long-term investments are classified as either trading or available-for-sale securities. Available-for-sale securities are carried at fair value, with unrealized gains and losses, net of tax, attributable to credit loss recorded through the statement of operations and unrealized gains and losses, net of tax, attributable to other non-credit factors reported in “Accumulated other comprehensive (loss) income,” a component of Total Equity. In determining the amount of credit loss, we compare the present value of cash flows expected to be collected to the amortized cost basis of the securities, considering credit default risks probabilities and changes in credit ratings as significant inputs, among other factors. Trading securities are carried at fair value, with unrealized gains and losses recognized through the consolidated statement of operations each reporting period. We periodically evaluate if an investment is considered impaired, whether an impairment is other than temporary, and the

 

28


Table of Contents

measurement of an impairment loss. We consider a variety of impairment indicators such as, but not limited to, a significant deterioration in the earnings performance, credit rating, or asset quality of the investment.

As of December 31, 2011, we held par value of $9,100,000 of auction rate securities. These auction rate securities consist of collateralized debt obligations, supported by pools of student loans, sponsored by state student loan agencies and corporate student loan servicing firms. The interest rates for these securities are reset at auction at regular intervals ranging from seven to 28 days. The auction rate securities held by us traded at par prior to February 2008 and are callable at par at the option of the issuer.

Until February 2008, the auction rate securities market was liquid, as the investment banks conducting the periodic “Dutch auctions” by which interest rates for the securities had been established had committed their capital to support such auctions in the event of insufficient third-party investor demand. Starting the week of February 11, 2008, a substantial number of auctions failed, as demand from third-party investors weakened and the investment banks conducting the auctions chose not to commit capital to support such auctions (i.e., investment banks chose not to purchase securities themselves in order to balance supply and demand, thereby facilitating a successful auction, as they had done in the past). The consequences of a failed auction are (a) an investor must hold the specific security until the next scheduled auction (unless that investor chooses to sell the security to a third party outside of the auction process) and (b) the interest rate on the security generally resets to an interest rate set forth in each security’s indenture.

As of December 31, 2011, we held auction rate securities that had experienced failed auctions totaling $9,100,000 at par value, all of which had been purchased through and are held by a broker-dealer affiliate of Bank of America, N.A. (the “Failed Auction Securities”). The majority of the Failed Auction Securities held by us were AAA/Aaa rated by the major credit rating agencies, with all of the securities collateralized by student loans, of which most are guaranteed by the U.S. Department of Education under the Federal Family Education Loan Program. We are not aware of any reason to believe any of the issuers of the Failed Auction Securities held by us are presently at risk of default. Through December 31, 2011, we have continued to receive interest payments on the Failed Auction Securities in accordance with the terms of their respective indentures. We believe that all of our auction rate security investments will ultimately be liquidated without significant loss primarily due to the overall quality of the issues held and the collateral securing the substantial majority of the underlying obligations. However, current conditions in the auction rate securities market have led us to conclude the recovery period for the Failed Auction Securities exceeds 12 months. As a result, we have continued to classify the Failed Auction Securities as long-term as of December 31, 2011.

Long-Lived Assets

We evaluate the recoverability of our identifiable intangible assets, goodwill and other long-lived assets when events or circumstances indicate a potential impairment. We periodically assess the remaining use of fixed assets based upon operating results and cash flows from operations. Equipment has been written-down as a result of these assessments as necessary. Goodwill is tested for potential impairment at least annually at the reporting unit level.

Stock-Based Compensation

We record stock-based compensation expense based on the fair value of stock-based awards measured at the grant date and recognized over the relevant service period. We estimate the fair value of each stock-based award on the measurement date using either the current market price or the Black-Scholes option valuation model. The Black-Scholes option valuation model incorporates assumptions as to stock price volatility, the expected life of options, forfeiture rate, a risk-free interest rate and dividend yields.

During 2010, we granted stock-based awards with performance-based vesting provisions tied to achievements of certain performance conditions. For performance-based awards, we assess, on an ongoing basis, the probability of whether the performance criteria will be achieved. If and when achievement of the performance criteria is deemed probable, we begin to recognize the associated compensation expense for the stock options over the relevant performance period.

 

29


Table of Contents

Many of these assumptions are highly subjective and require the exercise of management judgment. If management made different estimates or judgments, material differences in the amount of stock-based compensation could occur.

Product Warranties

We generally warrant our products for a period of two years. We maintain allowances for estimated product returns under warranty based upon a review of known or potential product failures in the field and upon historical patterns of product returns. If unforeseen product issues arise or product returns increase above expected rates, additional allowances may be required.

Income Taxes

We recognize deferred tax assets and liabilities using enacted rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. We reduce deferred tax assets by a valuation allowance if it is more likely than not that some portion or all of the deferred tax assets will not be realized. Prior to September 30, 2010, we maintained a valuation allowance against a significant portion of our deferred tax assets, consisting of net operating loss carryforwards, tax credit carryforwards and deductible temporary differences. Based on our pre-tax income for the nine months ended September 30, 2010 being sufficient to fully utilize our net operating loss carryforwards, a history of cumulative earnings before taxes for financial reporting purposes over a 12-quarter period, and expected future taxable income, we determined it was more likely than not a significant portion of the deferred tax assets would be realized. As a result, at September 30, 2010, we determined that it was appropriate to reverse a portion of its valuation allowance by $5,158,000 as a discrete benefit for income taxes for certain deductible temporary differences expected to be realized in future periods. An additional benefit of $1,159,000 was recorded in the fourth quarter of 2010. We could not make such a determination in the prior quarters of fiscal 2010 due to a lack of confidence in being able to accurately forecast the expected ordinary income (loss) for the year largely due to global economic conditions and the possible impact continued economic and business uncertainty would have on our business at those times.

As of December 31, 2011, we had a remaining valuation allowance of approximately $9,736,000 against certain deferred tax assets, for which realization cannot be considered more likely than not at this time. Such deferred tax assets principally relates to tax credit carryforwards in certain state tax jurisdictions for which sufficient taxable income for utilization cannot be projected at this time or the credits may expire without being utilized. We assess the need for the valuation allowance on a quarterly basis. The valuation allowance against these deferred tax assets may require adjustment in the future based on changes in the mix of temporary differences, changes in tax laws, and operating performance. In addition, the assessment of the valuation allowance requires us to make estimates of future taxable income and to estimate reversals of temporary differences. Changes in the assumptions or other circumstances may require additional valuation allowances if actual reversals of temporary differences differ from those estimates. If and when we determine the valuation allowance should be released, the adjustment would result in a tax benefit in the Consolidated Statements of Operations and may include a portion to be accounted for through “Additional paid-in capital”, a component of Stockholders’ Equity. The amount of the tax benefit to be recorded in a particular quarter could be material.

We follow a two-step process to determine the amount of tax benefit to recognize in our financial statements. First, the tax position must be evaluated to determine the likelihood that it will be sustained upon examination by a tax authority. If the tax position is deemed “more-likely-than-not” to be sustained, the tax position is then assessed to determine the amount of benefit to recognize in the financial statements. The amount of the benefit that may be recognized is the largest amount that has a greater than 50 percent likelihood of being realized upon ultimate settlement. If the tax position does not meet the “more-likely-than-not” threshold then it is not recognized in the financial statements. We accrue interest and penalties, if any, related to unrecognized tax benefits as a component of income tax expense. If the judgments and estimates made by us are not correct, the unrecognized tax benefits may have to be adjusted, and the adjustments could be material.

 

30


Table of Contents

Contingencies

From time to time, we receive notices of product failure claims, infringement of patent or other intellectual property rights of others or for other claims. In fact, we were named in a complaint for patent infringement filed by SynQor, Inc. in January 2011 (see Part I—Item 3—Legal Proceedings) that is ongoing. We assess each matter to determine if a contingent liability should be recorded. In making this assessment, we may consult, depending on the nature of the matter, with external legal counsel and technical experts. Based on the information we obtain, combined with our judgment regarding all the facts and circumstances of each matter, we determine whether it is probable that a contingent loss may be incurred and whether the amount of such loss can be reasonably estimated. Should a loss be probable and reasonably estimable, we record a loss. In determining the amount of the loss, we consider advice received from experts in the specific matter, current status of legal proceedings, if any, prior case history and other factors. Should the judgments and estimates made by us be incorrect, we may need to record additional contingent losses that could materially adversely impact our results of operations and financial position.

Year ended December 31, 2011 compared to Year ended December 31, 2010

Net revenues for fiscal 2011 were $252,968,000, an increase of $2,235,000 or 0.9%, as compared to $250,733,000 for fiscal 2010.

The components of revenue for the years ended December 31 were as follows (dollars in thousands):

 

                   Increase (decrease)  
     2011      2010      $     %  

BBU

   $ 194,830      $ 217,018      $ (22,188     (10.2 )% 

V*I Chip

     52,271        28,972        23,299       80.4

Picor

     5,867        4,743        1,124       23.7
  

 

 

    

 

 

    

 

 

   

Total

   $ 252,968      $ 250,733      $ 2,235       0.9
  

 

 

    

 

 

    

 

 

   

The decrease in BBU revenues is attributed to a decrease in Vicor Custom Power revenue of approximately $18,646,000, due to a decrease in defense electronics bookings and the completion of two major programs in the first part of 2011. In addition, BBU component revenues decreased by approximately $4,039,000, which was partially offset by an increase in VJCL revenues of approximately $2,334,000. The increases in V*I Chip and Picor revenues were driven by strong bookings from their lead customer, particularly in the third quarter of 2010 and the first quarter of 2011. Revenue growth for both V*I Chip and Picor is expected to decline in 2012. Overall orders for fiscal year 2011 decreased by 16.1% compared to 2010. This decrease was caused by decreases in BBU, V*I Chip, and Picor orders during the period of 18.8%, 2.0% and 25.9%, respectively.

Gross margin for fiscal 2011 decreased $7,826,000, or 6.8%, to $106,694,000 from $114,520,000 in 2010. Gross margin as a percentage of net revenues decreased to 42.2% in fiscal 2011 from 45.7% in fiscal 2010. The primary component of the decrease in gross margin (dollars and percentage) was primarily due to a shift in product mix to a higher proportion of lower-margin V*I Chip products, along with lower volumes of higher-margin BBU component products and Vicor Custom Power products.

Income (loss) from operations by segment for the years ended December 31 were as follows (dollars in thousands):

 

                 Increase (decrease)  
     2011     2010     $     %  

BBU

   $ 31,938     $ 55,619     $ (23,681     (42.6 )% 

V*I Chip

     (16,294     (24,565     8,271       33.7

Picor

     (1,239     (1,282     43       3.4

 

31


Table of Contents

The decrease in BBU operating profit in 2011 compared to 2010 was due to a decrease in revenues and a related decrease in gross margin, as well as an increase in operating expenses. The decrease in V*I Chip operating loss in 2011 compared to 2010 was due to the increase in revenues and related improvement in gross margins, partially offset by an increase in operating expenses. The cash needs for each segment are primarily for working capital and capital expenditures. Positive cash flow from BBU has historically funded and is expected to continue to fund V*I Chip operations and the purchase of equipment for V*I Chip for the foreseeable future.

Selling, general and administrative expenses were $54,041,000 for 2011, an increase of $4,624,000, or 9.4%, as compared to $49,417,000 for the same period in 2010. As a percentage of net revenues, selling, general and administrative expenses increased to 21.4% in 2011 from 19.7% in 2010.

The components of the $4,624,000 increase in selling, general, and administrative expenses were as follows (in thousands):

 

     Increase (decrease)  

Compensation

   $ 3,212       12.2 %(1) 

Legal fees

     1,910       251.9 %(2) 

Outside services

     608       39.8 %(3) 

Travel expenses

     324       17.0 %(4) 

Depreciation and amortization

     185       5.7

Employment recruiting

     144       48.8

Commissions expense

     (974     (14.3 )%(5) 

Advertising expenses

     (664     (22.8 )%(6) 

Audit and tax fees

     (161     (10.8 )% 

Computer expenses

     (159     (13.8 )% 

Other, net

     199       6.7
  

 

 

   
   $   4,624       9.4
  

 

 

   

 

(1) Increase primarily attributable to an increase in headcount, annual compensation adjustments in May 2011, an increase in fringe benefit expense due to increases in premiums for employee health benefits, and additional stock-based compensation expense related to Picor stock options.

 

(2) Increase in legal fees due to a patent infringement claim filed against the Company during the first quarter of 2011 by SynQor, Inc. See Note 15 of the Consolidated Financial Statement for discussion of this matter.

 

(3) Increase primarily attributed to additional outsourcing of certain sales and marketing and information technology functions.

 

(4) Increase primarily attributed to increased travel by the Company’s sales and marketing personnel.

 

(5) Decrease primarily attributed to the decrease in net revenues subject to commissions, in particular due to an increase in international revenues, which are generally not subject to commissions.

 

(6) Decrease primarily due to decreases in sales support expenses, direct mailings and advertising in trade publications.

Research and development expenses increased $2,986,000, or 8.3%, to $38,967,000 in 2011 from $35,981,000 in 2010. As a percentage of net revenues, research and development increased to 15.4% in 2011 from 14.4% in 2010.

 

32


Table of Contents

The components of the $2,986,000 increase in research and development expenses were as follows (in thousands):

 

     Increase (decrease)  

Compensation

   $ 2,604       10.4 %(1) 

Project and pre-production materials

     365       11.1 %(2) 

Depreciation and amortization

     256       16.4 %(3) 

Deferred costs

     217       55.2 %(4) 

Computer expenses

     119       56.2

Outside services/subcontract labor

     (447     (25.4 )%(5) 

Supplies expenses

     (154     (17.7 )% 

Employment recruiting

     (117     (56.8 )% 

Other, net

     143       4.0
  

 

 

   
   $ 2,986       8.3
  

 

 

   

 

(1) Increase primarily attributed to an increase in research and development personnel for the BBU and V*I Chip, annual compensation adjustments in May 2011, an increase in fringe expense due to increases in premiums for employee health benefits, and additional stock-based compensation expense related to Picor stock options.

 

(2) Increase primarily attributed to an increase in materials used in the development of V*I Chip and Picor products.

 

(3) Increase primarily attributed to additions of engineering equipment over the past several quarters for the BBU and V*I Chip.

 

(4) Increase primarily attributed to a decrease, as compared to the prior year, in deferred costs capitalized for certain non-recurring engineering projects for which the related revenues have been deferred.

 

(5) Decrease attributable to decreased use of outside services due to decreased activities at one of the Vicor Custom subsidiaries.

The major changes in the components of “Other income, net” for the years ended December 31 were as follows (in thousands):

 

     2011     2010     Increase
(decrease)
 

Interest income

   $ 259     $ 442     $ (183

Unrealized gain on trading securities

            970       (970

Unrealized loss on auction rate securities rights

            (962     962  

Credit gains (losses) on available for sale securities

     302       (146     448  

Foreign currency losses, net

     (326     (158     (168

Gain on disposal of equipment

     22       249       (227

Other

     89       102       (13
  

 

 

   

 

 

   

 

 

 
   $ 346     $ 497     $ (151
  

 

 

   

 

 

   

 

 

 

Pursuant to a settlement agreement reached with UBS AG in 2008, the Company’s then-remaining par value of $8,600,000 of auction rate securities held by UBS were purchased by UBS at par value on June 30, 2010. The unrealized gain and (loss) on the Company’s auction rate securities and associated rights for the quarter ended June 30, 2010, resulted from this sale and the termination of the associated rights. Because the Company recorded, for the quarter ended March 31, 2010, an income statement gain of $4,000, representing the net of the decrease in estimated value of the auction rate securities held by UBS and the increase in the estimated value of the associated rights, the Company recognized no net loss on the sale of the auction rate securities to UBS. The increase in credit gains on available-for-sale auction rate securities (i.e., the Company’s auction rates securities

 

33


Table of Contents

held by Bank of America) was primarily due to the redemption at par by issuers of $9,975,000 of auction rate securities during the year ended December 31, 2011, for which credit losses had previously been recorded. The decrease in interest income for the period was due to lower average balances on the Company’s long-term investments, lower balances on auction rate securities earning higher penalty rates, as well as a general decrease in interest rates. The Company’s exposure to market risk for fluctuations in foreign currency exchange rates relates primarily to the operations of VJCL. The functional currency of the Company’s subsidiaries in Europe and Hong Kong is the U.S. dollar.

Income before income taxes was $14,032,000 in 2011 compared to $29,619,000 in 2010.

The provision (benefit) for income taxes and the effective income tax rate for the years ended December 31 were as follows (dollars in thousands):

 

     2011     2010  

Provision (benefit) for income taxes

   $ 4,723     $ (3,920

Effective income tax rate

     33.7     (13.2 %) 

Compared to 2010, the provision for income taxes and the effective tax rate increased in 2011 due to the complete utilization of remaining Federal, foreign, and a significant portion of remaining state, net operating loss carryforwards through the end of 2010, which lowered the income tax provision and effective tax rate in 2010. During the third and fourth quarters of 2010, the Company recorded non-recurring, non-cash benefits of $5,158,000 and $1,159,000, respectively, due to releasing a portion of its deferred tax valuation allowance. See Note 14 of the Consolidated Financial Statements for a discussion of the accounting for the tax benefit, deferred tax assets and deferred tax valuation allowances.

Net income of noncontrolling interest increased by $252,000 in 2011 to $466,000 as compared to $214,000 in 2010. This was due to higher net income of entities in which the Company holds a noncontrolling equity interest (i.e., certain Vicor Custom Power subsidiaries and VJCL).

Basic and diluted income per share attributable to Vicor Corporation was $0.21 for the year ended December 31, 2011 as compared to $0.80 for the year ended December 31, 2010.

Year ended December 31, 2010 compared to Year ended December 31, 2009

Net revenues for fiscal 2010 were $250,733,000, an increase of $52,774,000 or 26.7%, as compared to $197,959,000 for the same period in 2009.

The components of revenue for the years ended were as follows (dollars in thousands):

 

                   Increase (decrease)  
     2010      2009      $      %  

BBU

   $ 217,018      $ 186,980      $ 30,038        16.1

V*I Chip

     28,972        8,960        20,012        223.3

Picor

     4,743        2,019        2,724        134.9
  

 

 

    

 

 

    

 

 

    

Total

   $ 250,733      $ 197,959      $ 52,774        26.7
  

 

 

    

 

 

    

 

 

    

Overall orders for fiscal year 2010 increased by 33.5% compared with 2009. This increase was caused by increases in BBU, V*I Chip, and Picor orders during the period of 18.3%, 197.1%, and 174.5%, respectively.

Gross margin for fiscal 2010 increased $26,926,000, or 30.7%, to $114,520,000 from $87,594,000 in 2009. Gross margin as a percentage of revenues in 2010 increased to 45.7% from 44.2% compared to 2009. The primary components of the increase in gross margin dollars and percentage were the increase in net revenues and lower BBU Andover and V*I Chip per unit productions costs.

 

34


Table of Contents

Income (loss) from operations by segment for the years ended December 31 were as follows (dollars in thousands):

 

                 Increase (decrease)  
     2010     2009         $             %      

BBU

   $ 55,619     $ 29,173     $ 26,446       90.7

V*I Chip

     (24,565     (22,642     (1,923     (8.5 )% 

Picor

     (1,282     (4,265     2,983       69.9

The increase in BBU operating profit and decrease in Picor operating loss in 2010 compared to 2009 was primarily due to the increase in revenues and related improvement in gross margins for each segment. The increase in V*I Chip operating loss in 2010 compared to 2009 was primarily due to an increase in research and development expense. Overall gross margin for V*I Chip was negative in both 2010 and 2009.

Selling, general and administrative expenses were $49,417,000 for 2010, an increase of $1,485,000, or 3.1%, as compared to $47,932,000 for the same period in 2009. As a percentage of net revenues, selling, general and administrative expenses decreased to 19.7% from 24.2%, due to the increase in net revenues.

The components of the $1,485,000 increase in selling, general, and administrative expenses were as follows (in thousands):

 

     Increase (decrease)  

Commissions expense

   $ 543       8.6 %(1) 

Advertising expenses

     465       19.0 %(2) 

Outside services

     237       23.1 %(3) 

Travel expenses

     185       10.8 %(4) 

Employment advertising and recruiting

     136       111.4 %(5) 

Facilities expense

     114       8.6

Telephone

     98       9.9

Audit and tax fees

     64       5.1

Legal fees

     (302     (28.5 )%(6) 

Depreciation and amortization

     (167     (4.9 )%(7) 

Other, net

     112       0.4
  

 

 

   
   $ 1,485       3.1
  

 

 

   

 

(1) Increase primarily attributed to the increase in net revenues, subject to changes in the mix of revenues subject to commissions.

 

(2) Increase primarily attributed to the increase trade publication advertising and increased participation in trade shows, primarily by V*I Chip.

 

(3) Increase primarily attributed to the outsourcing of certain information technology functions that were performed in-house in prior periods.

 

(4) Represents an overall increase in travel across all business units.

 

(5) Increase due to increase in recruiting costs for newly hired personnel.

 

(6) Decrease primarily attributed to a decrease in activity associated with the Company’s litigation brought against certain of its insurance carriers with respect to the Ericsson, Inc. settlement of product liability litigation in 2010 as compared to 2009.

 

(7) Decrease due to certain fixed assets becoming fully depreciated during 2010.

Research and development expenses increased $4,345,000, or 13.7%, to $35,981,000 in 2010 from $31,636,000 in 2009. As a percentage of net revenues, research and development decreased to 14.4% from 16.0%, due to the increase in net revenues.

 

35


Table of Contents

The components of the $4,345,000 increase in research and development expenses were as follows (in thousands):

 

     Increase (decrease)  

Compensation

   $ 2,101        8.8 %(1) 

Outside services/subcontract labor

     787        98.1 %(2) 

Deferred costs

     454        53.6 %(3) 

Project and pre-production materials

     328        11.3 %(4) 

Facilities expenses

     152        8.8

Employment recruiting

     117        132.3 %(5) 

Depreciation and amortization

     110        7.6

Set-up and tooling charges

     100        47.1

Other, net

     196        13.2
  

 

 

    
   $ 4,345        13.7
  

 

 

    

 

(1) Increase primarily attributed to an increase in research and development personnel for the BBU and V*I Chip business units, annual compensation adjustments in May 2010, and an increase in fringe expense due to increase in premiums for employee health benefits.

 

(2) Increase primarily attributed to increased use of outside services and subcontract labor due to increased activity at Vicor Custom subsidiaries, in lieu of hiring permanent employees.

 

(3) Increase primarily attributed to a decrease as compared to the prior year, in the deferral of costs capitalized for certain non-recurring engineering projects for which the related revenues have been deferred.

 

(4) Increase primarily attributed to an increase in materials used in the development of V*I Chip and Picor products.

 

(5) Increase primarily attributed to relocation costs for newly hired research and development personnel for the V*I Chip business unit.

During 2009, we initiated and completed workforce reductions and pre-tax charges were recorded for the cost of severance and other employee-related costs involving cash payments during 2009 and 2010 based on each employee’s length of service. Total severance charges of $4,099,000 were recorded in 2009.

During the third quarter of 2009, we entered into a release and settlement agreement with a vendor over alleged product performance issues with certain products the vendor had sold to us. We received a payment of $750,000 in consideration for the settlement, which is recorded in “Gain from litigation-related and other settlements, net” in the accompanying Consolidated Statement of Operations. In addition, we completed negotiations with Exar and Rohm, resulting in separate settlement agreements calling for a final payment to Exar of $70,000 and no additional payment due Rohm. As a result of the settlements, we reversed a remaining excess accrual of approximately $96,000 in the third quarter of 2009, which is recorded in “Gain from litigation-related and other settlements, net” in the accompanying Consolidated Statement of Operations.

The major changes in the components of “Other income, net” for the years ended December 31 were as follows (in thousands):

 

     2010     2009     Increase
(decrease)
 

Interest income

   $ 442     $ 717     $ (275

Unrealized gain on trading securities

     970       1,268       (298

Unrealized loss on auction rate securities rights

     (962     (964     2  

Credit losses on available for sale securities

     (146     (464     318  

Foreign currency (losses) gains, net

     (158     35       (193

Gain on disposal of equipment

     249       30       219  

Other

     102       60       42  
  

 

 

   

 

 

   

 

 

 
   $ 497     $ 682     $ (185
  

 

 

   

 

 

   

 

 

 

 

36


Table of Contents

The unrealized gains (losses) and estimated credit loss on our auction rate securities and securities rights results from the change in the estimate fair value of these investments as of December 31, 2010 and 2009, compared to December 31, 2009 and 2008, respectively. The decrease in interest income is due to lower average balances on certain of our cash accounts that bear interest as well as a decrease in interest rates. Our exposure to market risk for fluctuations in foreign currency exchange rates relates primarily to the operations of VJCL. The functional currency of our subsidiaries in Europe and Hong Kong is the U.S. dollar.

Income before income taxes was $29,619,000 in 2010 as compared to $5,455,000 for 2009.

The (benefit) provision for income taxes and the effective income tax rate for the years ended December 31 were as follows (dollars in thousands):

 

     2010     2009  

(Benefit) provision for income taxes

   $ (3,920   $ 1,362  

Effective income tax rate

     (13.2 %)      25.0

The increase in the benefit for income taxes and the decrease in the effective income tax rate for the year ended December 31, 2010, compared to 2009, was principally due to the tax benefits of ($5,158,000) and ($1,159,000) recorded as a result of reversing portions of our deferred tax valuation allowance in the third and fourth quarters of 2010, respectively, partially offset by an increase in federal, state, and foreign income taxes as compared to 2009.

Net income of noncontrolling interest decreased by $1,081,000 in 2010 to $214,000 as compared to $1,295,000 in 2009. This was due to lower net income at certain entities in which we hold a noncontrolling interest.

Basic and diluted income per share attributable to Vicor Corporation was $0.80 for the year ended December 31, 2010 as compared to $0.07 for the year ended December 31, 2009.

LIQUIDITY AND CAPITAL RESOURCES

At December 31, 2011, we had $71,908,000 in unrestricted cash and cash equivalents. The ratio of current assets to current liabilities was 7.2:1 at December 31, 2011 as compared to 5.6:1 at December 31, 2010. Working capital increased $18,932,000 to $124,386,000 at December 31, 2011 from $105,454,000 at December 31, 2010. The primary factors affecting the working capital increase were an increase in cash and cash equivalents of $22,629,000, as well as a decrease in accounts payable of $3,848,000, offset by a decrease in accounts receivable $7,415,000. The primary sources of cash for the year ended December 31, 2011 were $26,407,000 from operating activities and $10,038,000 in net sales of long-term investments. The primary uses of cash for the year ended December 31, 2011 were $7,466,000 for the purchase of equipment, $6,272,000 for the payments of cash dividends, and $690,000 for the payments of noncontrolling interest dividends, discussed below.

As of December 31, 2011, we held $9,100,000 of auction rate securities classified as long-term investments. See Note 4 of the Consolidated Financial Statements for a discussion of the securities and our accounting treatment thereof.

In November 2000, our Board of Directors authorized the repurchase of up to $30,000,000 of Common Stock (the “November 2000 Plan”). The November 2000 Plan authorizes us to make such repurchases from time to time in the open market or through privately negotiated transactions. The timing of such repurchases and the number of shares purchased in each transaction are at the discretion of management based on its view of economic and financial market conditions. We did not repurchase shares of Common Stock during the year ended December 31, 2011. As of December 31, 2011, we had approximately $8,541,000 remaining under the November 2000 Plan.

On July 22, 2011, our Board of Directors approved a cash dividend of $0.15 per share of the Company’s Common Stock. The total dividend of approximately $6,272,000 was paid on August 31, 2011 to shareholders of record at the close of business on August 9, 2011.

During the year ending December 31, 2011, two subsidiaries paid a total of $2,000,000 in cash dividends, of which $690,000 was paid to outside shareholders. Dividends paid to outside shareholders are accounted for as a reduction in noncontrolling interest.

 

37


Table of Contents

The table below summarizes our contractual obligations as of December 31, 2011 (in thousands):

 

     Payments Due by Period  

Contractual Obligations

   Total      Less than
1 Year
     Years 2 & 3      Years 4 & 5      More Than
5 Years
 

Operating lease obligations

   $ 2,552      $ 1,156      $ 1,178      $ 218      $   

Purchase obligations

     1,012        307        625        80          
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 
   $ 3,564      $ 1,463      $ 1,803      $ 298      $   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Included in purchase obligations, above, are amounts for a contract with a third-party to supply nitrogen for our manufacturing and research and development activities. Under the contract, we are obligated to pay a minimum of $300,000 annually, subject to semi-annual price adjustments, through March 2015.

In addition to the amounts shown in the table above, approximately $1,227,000 of unrecognized tax benefits have been recorded as liabilities, and we are uncertain as to if or when such amounts may be settled. Related to these unrecognized tax benefits, we have also recorded a liability for potential interest and penalties of approximately $145,000 as of December 31, 2011.

Our primary liquidity needs are for making continuing investments in manufacturing equipment. We believe cash generated from operations and the total of its cash and cash equivalents will be sufficient to fund planned operations and capital equipment purchases for the foreseeable future. We have approximately $1,024,000 of capital expenditure commitments, principally for manufacturing equipment, as of December 31, 2011.

Based on our ability to access cash and other short-term investments and our expected operating cash flows, we do not anticipate that the current lack of liquidity of our auction rate securities will affect our ability to execute our current operating plan.

We do not consider the impact of inflation and changing prices on our business activities or fluctuations in the exchange rates for foreign currency transactions to have been significant during the last three fiscal years.

ITEM 7A.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to a variety of market risks, including changes in interest rates affecting the return on our cash and cash equivalents and fluctuations in foreign currency exchange rates. As our cash and cash equivalents consist principally of money market securities, which are short-term in nature, we believe our exposure to market risk on interest rate fluctuations for these investments is not significant. Our long-term investments consist mainly of municipal and corporate debt securities, of which the Failed Auction Securities represent a significant portion. While the Failed Auction Securities are all highly rated investments, generally with AAA/Aaa ratings, continued failure to sell at their reset dates could negatively impact the carrying value of the investments, in turn leading to impairment charges in future periods. Changes in the fair value of the Failed Auction Securities attributable to credit loss are recorded through earnings, with the remainder of any change recorded in “Accumulated other comprehensive (loss) income”, a component of Stockholders’ Equity. Should a decline in the value of the Failed Auction Securities be other than temporary, the losses would be recorded in Other income, net. We do not believe there was an “other-than-temporary” decline in value in these securities as of December 31, 2011. We estimate that our annual interest income would change by approximately $112,000 in 2011 for each 100 basis point increase or decrease in interest rates.

Our exposure to market risk for fluctuations in foreign currency exchange rates relates primarily to the operations of VJCL and changes in the dollar/yen exchange rate, as the functional currency of our subsidiaries in Europe and Hong Kong is the U.S. dollar. Therefore, we believe market risk is mitigated since these operations are not materially exposed to foreign exchange fluctuations. Relative to foreign currency exposure against the yen existing on December 31, 2011, we estimate that a 10% unfavorable movement in the dollar/yen exchange rate would increase foreign currency loss by approximately $15,000.

 

38


Table of Contents
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

INDEX

 

     Page  

FINANCIAL STATEMENTS

  

Report of Independent Registered Public Accounting Firm

     40   

Consolidated Balance Sheets as of December 31, 2011 and December 31, 2010

     41   

Consolidated Statements of Operations For The Years Ended December 31, 2011, 2010, and 2009

     42   

Consolidated Statements of Cash Flows For The Years Ended December 31, 2011, 2010, and 2009

     43   

Consolidated Statements of Equity For The Years Ended December 31, 2011, 2010, and 2009

     44   

Notes to the Consolidated Financial Statements

     45   

Schedule (Refer to Item 15)

     80   

 

39


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Vicor Corporation:

We have audited the accompanying consolidated balance sheets of Vicor Corporation (a Delaware Corporation) and its subsidiaries (collectively, the “Company”) as of December 31, 2011 and 2010, and the related consolidated statements of operations, equity, and cash flows for each of the three years in the period ended December 31, 2011. Our audits of the basic financial statements included the financial statement schedule listed in the index appearing under Item 15(a)(2). These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the Consolidated Financial Statements referred to above present fairly, in all material respects, the financial position of Vicor Corporation and subsidiaries as of December 31, 2011 and 2010, and the results of their operations and their cash flows for the three years in the period ended December 31, 2011 in conformity with accounting principles generally acceptable in the United States of America. Also in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Vicor Corporation and subsidiaries’ internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated March 2, 2012 expressed an unqualified opinion thereon.

 

/s/ Grant Thornton LLP
Boston, Massachusetts
March 2, 2012

 

40


Table of Contents

VICOR CORPORATION

CONSOLIDATED BALANCE SHEETS

December 31, 2011 and 2010

(In thousands, except per share data)

 

     2011     2010  
ASSETS     

Current assets:

    

Cash and cash equivalents

   $ 71,908     $ 49,279  

Accounts receivable, less allowance of $266 in 2011 and $309 in 2010

     31,410       38,825  

Inventories, net

     35,752       35,489  

Deferred tax assets

     2,176       2,164  

Other current assets

     3,088       2,397  
  

 

 

   

 

 

 

Total current assets

     144,334       128,154  

Long-term investments, net

     9,585       18,417  

Property, plant and equipment, net

     47,241       50,848  

Long-term deferred tax assets

     2,542       2,805  

Other assets

     4,439       4,688  
  

 

 

   

 

 

 
   $ 208,141     $ 204,912  
  

 

 

   

 

 

 
LIABILITIES AND EQUITY     

Current liabilities:

    

Accounts payable

   $ 8,151     $ 11,999  

Accrued compensation and benefits

     7,337       6,772  

Accrued expenses

     2,846       3,138  

Income taxes payable

     420       102  

Deferred revenue

     1,194       689  
  

 

 

   

 

 

 

Total current liabilities

     19,948       22,700  

Long-term deferred revenue

     2,124       2,178  

Long-term income taxes payable

     1,359       1,022  

Commitments and contingencies (Note 15)

    

Equity:

    

Vicor Corporation stockholders’ equity:

    

Preferred Stock, $.01 par value, 1,000,000 shares authorized; no shares issued Class B Common Stock: 10 votes per share, $.01 par value, 14,000,000 shares authorized, 11,767,052 shares issued and outstanding

     118       118  

Common Stock: 1 vote per share, $.01 par value, 62,000,000 shares authorized 38,441,595 shares issued and 30,043,197 shares outstanding (38,400,897 shares issued and 30,002,499 shares outstanding in 2010)

     387       385  

Additional paid-in capital

     166,227       163,933  

Retained earnings

     136,362       133,791  

Accumulated other comprehensive loss

     (322     (1,369

Treasury stock at cost: 8,398,398 shares in 2011 and 2010

     (121,827     (121,827
  

 

 

   

 

 

 

Total Vicor Corporation stockholders’ equity

     180,945       175,031  

Noncontrolling interest

     3,765       3,981  
  

 

 

   

 

 

 

Total equity

     184,710       179,012  
  

 

 

   

 

 

 
     $208,141     $ 204,912  
  

 

 

   

 

 

 

See accompanying notes.

 

41


Table of Contents

VICOR CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

Years Ended December 31, 2011, 2010 and 2009

(In thousands, except per share amounts)

 

     2011     2010     2009  

Net revenues

   $ 252,968     $ 250,733     $ 197,959  

Cost of revenues

     146,274       136,213       110,365  
  

 

 

   

 

 

   

 

 

 

Gross margin

     106,694       114,520       87,594  

Operating expenses:

      

Selling, general and administrative

     54,041       49,417       47,932  

Research and development

     38,967       35,981       31,636  

Severance charges

                   4,099  

Gain from litigation-related and other settlements, net

                   (846
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     93,008       85,398       82,821  
  

 

 

   

 

 

   

 

 

 

Income from operations

     13,686       29,122       4,773  

Other income, net:

      

Total other than temporary impairment gains on available-for-sale securities, net of settlement losses

     1,206       (271     759  

Portion of (losses) gains recognized in other comprehensive income

     (904     125       (1,223
  

 

 

   

 

 

   

 

 

 

Net impairment gains (losses) recognized in earnings

     302       (146     (464

Other income, net

     44       643       1,146  
  

 

 

   

 

 

   

 

 

 

Total other income, net

     346       497       682  
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     14,032       29,619       5,455  

Provision (benefit) for income taxes

     4,723       (3,920     1,362  
  

 

 

   

 

 

   

 

 

 

Consolidated net income

     9,309       33,539       4,093  

Less: Net income attributable to noncontrolling interest

     466       214       1,295  
  

 

 

   

 

 

   

 

 

 

Net income attributable to Vicor Corporation

   $ 8,843     $ 33,325     $ 2,798  
  

 

 

   

 

 

   

 

 

 

Net income per common share attributable to Vicor Corporation:

      

Basic

   $ 0.21     $ 0.80     $ 0.07  

Diluted

   $ 0.21     $ 0.80     $ 0.07  

Shares used to compute net income per common share attributable to Vicor Corporation:

      

Basic

     41,797       41,700       41,665  

Diluted

     41,856       41,772       41,671  

Cash dividends declared per share

   $ 0.15     $ 0.30     $   

See accompanying notes.

 

42


Table of Contents

VICOR CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

Years Ended December 31, 2011, 2010 and 2009

(In thousands)

 

     2011     2010     2009  

Operating activities:

      

Consolidated net income

   $ 9,309     $ 33,539     $ 4,093  

Adjustments to reconcile consolidated net income to net cash provided by operating activities:

      

Depreciation and amortization

     11,005       10,222       10,198  

Stock compensation expense

     1,923       871       657  

Increase (decrease) in long-term deferred revenue

     350       (18     1,078  

Credit (gain) loss on available for sale securities

     (302     146       464  

Deferred income taxes

     148       (6,274     (74

Excess tax benefit of share-based compensation

     (133     (213       

Gain on disposal of equipment

     (21     (249     (30

Unrealized gain on trading securities

            (970     (1,268

Unrealized loss on auction rate security rights

            962       964  

Severance charges

                   4,099  

Change in current assets and liabilities, net

     4,128       (21,122     4,617  
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     26,407       16,894       24,798  

Investing activities:

      

Purchases of investments

     (1,104     (908     (1,695

Sales and maturities of investments

     11,142       15,768       6,650  

Additions to property, plant and equipment

     (7,466     (12,103     (10,643

Proceeds from sale of equipment

     10       421       32  

Change in restricted cash

            415       322  

(Increase) decrease in other assets

     (55     172       (572
  

 

 

   

 

 

   

 

 

 

Net cash provided by (used in) investing activities

     2,527       3,765       (5,906

Financing activities:

      

Proceeds from issuance of Common Stock

     452       1,104         

Common Stock dividends paid

     (6,272     (12,506       

Noncontrolling interest dividends paid

     (690     (552     (1,269

Excess tax benefit of share-based compensation

     133       213         
  

 

 

   

 

 

   

 

 

 

Net cash used in financing activities

     (6,377     (11,741     (1,269

Effect of foreign exchange rates on cash

     72       137       (38
  

 

 

   

 

 

   

 

 

 

Net increase in cash and cash equivalents

     22,629       9,055       17,585  

Cash and cash equivalents at beginning of period

     49,279       40,224       22,639  
  

 

 

   

 

 

   

 

 

 

Cash and cash equivalents at end of period

   $ 71,908     $ 49,279     $ 40,224  
  

 

 

   

 

 

   

 

 

 

Change in assets and liabilities:

      

Accounts receivable

   $ 7,546     $ (11,926   $ 2,148  

Inventories, net

     (162     (13,928     5,291  

Other current assets

     (224     2,050       (2,065

Accounts payable and accrued liabilities

     (3,861     3,881       2,550  

Accrued severance charges

            (259     (3,840

Accrual for litigation settlements

                   (162

Income taxes payable

     324       892       (1,164

Deferred revenue

     505       (1,832     1,859  
  

 

 

   

 

 

   

 

 

 
   $ 4,128     $ (21,122   $ 4,617  
  

 

 

   

 

 

   

 

 

 

Supplemental disclosures:

      

Cash paid during the year for income taxes, net of refunds

   $ 4,178     $ 1,113     $ 3,122  

See accompanying notes.

 

43


Table of Contents

VICOR CORPORATION

CONSOLIDATED STATEMENTS OF EQUITY

Years Ended December 31, 2011, 2010 and 2009

(In thousands)

 

    Class B
Common
Stock
    Common
Stock
    Additional
Paid-In
Capital
    Retained
Earnings
    Accumulated
Other
Comprehensive
Income (Loss)
    Treasury
Stock
    Total
Vicor
Corporation
Stockholders’
Equity
    Noncontrolling
Interest
    Total
Equity
 

Balance on December 31, 2008

  $ 118      $ 384      $ 161,089      $ 110,174      $ (2,767   $ (121,827   $ 147,171      $ 4,255      $ 151,426   

Noncontrolling interest dividends paid

                  (1,269     (1,269

Stock-based compensation expense

        657             657         657  

Net income

          2,798           2,798       1,295       4,093  

Unrealized gain on investments

            1,223         1,223         1,223  

Currency translation adjustments, net of tax of $30

            (64       (64       (64
             

 

 

     

 

 

 

Comprehensive income

                3,957         5,252  
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance on December 31, 2009

    118       384       161,746       112,972       (1,608     (121,827     151,785       4,281       156,066  

Sales of Common Stock

      1       1,103             1,104         1,104  

Common Stock dividends paid

          (12,506         (12,506       (12,506

Noncontrolling interest dividend paid

                  (552     (552

Excess tax benefit of share-based compensation

        213             213         213  

Stock-based compensation expense

        871             871         871  

Net income

          33,325           33,325       214       33,539  

Unrealized gain on investments

            (123       (123     (2     (125

Currency translation adjustments, net of tax of $169

            362         362       40       402  
             

 

 

   

 

 

   

 

 

 

Comprehensive income

                33,564       252       33,816  
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance on December 31, 2010

    118       385       163,933       133,791       (1,369     (121,827     175,031       3,981       179,012  

Sales of Common Stock

      2       491             493         493  

Common Stock dividends paid

          (6,272         (6,272       (6,272

Noncontrolling interest dividends paid

                       (690     (690

Excess tax benefit of share-based compensation

        133             133         133  

Stock-based compensation expense

        1,567             1,567         1,567  

Liability stock option awards reclassified to equity

        103             103         103  

Net income

          8,843           8,843       466       9,309  

Unrealized gain on investments

            915         915       (11     904  

Currency translation adjustments, net of tax of $107

            132         132       19       151  
             

 

 

   

 

 

   

 

 

 

Comprehensive income

                9,890       474       10,364  
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance on December 31, 2011

  $ 118      $ 387      $ 166,227      $ 136,362      $ (322   $ (121,827   $ 180,945      $ 3,765      $ 184,710   
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

See accompanying notes.

 

44


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1.   DESCRIPTION OF BUSINESS

Vicor Corporation (the “Company” or “Vicor”) designs, develops, manufactures and markets modular power converters, power system components, and power systems. The Company also licenses certain rights to its technology in return for ongoing royalties. The principal markets for the Company’s power converters and systems are large Original Equipment Manufacturers and their contract manufacturers, and smaller, lower volume users which are broadly distributed across several major market areas.

2.   SIGNIFICANT ACCOUNTING POLICIES

Principles of consolidation

The Consolidated Financial Statements include the accounts of the Company and its subsidiaries. All intercompany transactions and balances have been eliminated upon consolidation. Certain of the Company’s Vicor Custom Power entities are not majority owned by the Company. These entities are consolidated by the Company as management believes that the Company has the ability to exercise control over their activities and operations.

Revenue recognition

Product revenue is recognized in the period when persuasive evidence of an arrangement with a customer exists, the products are shipped and title has transferred to the customer, the price is fixed or determinable, and collection is considered probable. License fees are recognized as earned. The Company recognizes revenue on such arrangements only when the contract is signed, the license term has begun, all obligations have been delivered to the customer, and collection is probable. The Company evaluates revenue arrangements with potential multi-element deliverables to determine if there is more than one unit of accounting. A deliverable constitutes a separate unit of accounting when it has standalone value and there are no customer-negotiated refund or return rights for the undelivered elements. The selling price for each deliverable is based on vendor-specific objective evidence (“VSOE”) if available, third-party evidence (“TPE”) if VSOE is not available, or best estimate of selling price (“BESP”) if neither VSOE or TPE is available. The Company defers revenue and the related cost of sales on shipments to certain distributors until the distributors resell the products to their customers.

The Company enters into arrangements containing multiple elements which may include a combination of non-recurring engineering services (“NRE”), prototype units and production units. The Company has determined that the NRE and prototype units represent one unit of accounting and the production units a separate unit of accounting, based on an assessment of the respective standalone value. When possible, revenue is allocated to the elements based on VSOE or TPE for each element. For arrangements where VSOE or TPE cannot be established, the Company uses BESP for the allocation of arrangement consideration. The objective of BESP is to determine the price at which the Company would typically transact a standalone sale of the product or service. BESP is determined by considering a number of factors including the Company’s pricing policies, internal costs and gross margin objectives, current market conditions, information gathered from experience in customer negotiations and the competitive landscape. The Company defers revenue recognition for the NRE and prototype units until completion of the final milestone under the NRE arrangement. Recognition generally takes place within six to twelve months of the initiation of the arrangement. Revenue for the production units is recognized upon shipment, as for product revenue summarized above. For certain multiple-element arrangements entered into prior to January 1, 2009 which contained a combination of technical support services, NRE, minimum license payments and future royalties, separate units of accounting could not be established. Therefore, revenue under these arrangements is deferred and recognized over the term of the arrangement. During 2011, 2010 and 2009, revenue recognized under multi-element arrangements accounted for less than 3% of net revenues.

 

45


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

During 2011, the Company established distribution partnerships with two leading electronic components distributors. The agreements with these distributors allow the distributors to receive price adjustment credits to return qualifying products for credit, as determined by the Company, in order to reduce the amounts of slow-moving, discontinued or obsolete product from their inventory. Distributors are also granted price adjustment credits in the event of a price decrease subsequent to the date the product was shipped and billed to the distributor. Given the uncertainties associated with the levels of price adjustment credits to be granted to distributors, the sales price to the distributor is not fixed or determinable until the distributor resells the products to their customers. Therefore, the Company defers revenue and the related cost of sales on shipments to distributors until the distributors resell the products to their customers and so the Company’s revenue fully reflects end customer purchases and is not impacted by distributor inventory levels. These agreements limit such returns to a certain percentage of the value of the Company’s shipments to that distributor during the prior quarter. In addition, distributors are allowed to return unsold products if the Company terminates the relationship with the distributor. Title to the inventory transfers to the distributor at the time of shipment or delivery to the distributor, and payment from the distributor is due in accordance with the Company’s standard payment terms. These payment terms are not contingent upon the distributors’ sale of the products to their customers. Upon title transfer to distributors, inventory is reduced for the cost of goods shipped, the margin (sales less cost of sales) is recorded as “deferred income on shipments to distributors, net” and an account receivable is recorded. As of December 31, 2011, the Company had gross deferred revenue of approximately $176,000 and gross deferred cost of revenues of approximately $72,000 under these agreements (none as of December 31, 2010).

Foreign currency translation

The financial statements of Vicor Japan Company, Ltd. (“VJCL”), a majority owned subsidiary, for which the functional currency is the Japanese yen, have been translated into U.S. dollars using the exchange rate in effect at the balance sheet date for balance sheet amounts and the average exchange rates in effect during the year for income statement amounts. The gains and losses resulting from the changes in exchange rates from year to year have been reported in other comprehensive income.

Transaction gains and losses and translation gains (losses) resulting from the remeasurement of foreign currency denominated assets and liabilities of the Company’s foreign subsidiaries where the functional currency is the U.S. dollar are included in other income, net. Foreign currency gains (losses) included in other income, net, were approximately ($326,000), ($158,000), and $35,000 in 2011, 2010 and 2009, respectively.

Cash and cash equivalents

Cash and cash equivalents include funds held in checking and money market accounts, certificates of deposit and debt securities with maturities of less than three months at the time of purchase. Cash and cash equivalents are valued at cost which approximates market value. The Company’s money market securities, which are classified as cash equivalents on the balance sheet, are purchased and redeemed at par. The estimated fair value is equal to the cost of the securities and due to the nature of the securities there are no unrealized gains or losses at the balance sheet dates.

Long-term investments

The Company’s principal sources of liquidity are its existing balances of cash and cash equivalents, as well as cash generated from operations. Consistent with the Company’s investment policy guidelines, the Company can invest, and has historically invested, its cash balances in demand deposit accounts, money market funds, brokered certificates of deposit and auction rate securities meeting certain quality criteria. All of the Company’s investments are subject to credit, liquidity, market, and interest rate risk.

 

46


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

The Company’s long-term investments are classified as either available-for-sale or trading securities. Available-for-sale securities are recorded at fair value, with unrealized gains and losses, net of tax, attributable to credit loss recorded through the statement of operations and unrealized gains and losses, net of tax, attributable to other non-credit factors recorded in “Accumulated other comprehensive loss”, a component of Stockholders’ Equity. In determining the amount of credit loss, the Company compares the present value of cash flows expected to be collected to the amortized cost basis of the securities, considering, among other factors, credit default risk probabilities and changes in credit ratings as significant inputs. Trading securities are recorded at fair value, with unrealized gains and losses recorded through the Consolidated Statements of Operations each reporting period.

The amortized cost of debt securities is adjusted for amortization of premiums and accretion of discounts to maturity, the net amount of which, along with interest and realized gains and losses, is included in “Other income, net” in the Consolidated Statements of Operations. The Company periodically evaluates investments to determine if impairment is required, whether an impairment is other than temporary, and the measurement of an impairment loss. The Company considers a variety of impairment indicators such as, but not limited to, a significant deterioration in the earnings performance, credit rating, or asset quality of the investment.

Fair value measurements

The Company accounts for certain financial assets at fair value, defined as the price that would be received to sell an asset or paid to transfer a liability (i.e., an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. A three-level hierarchy is used to show the extent and level of judgment used to estimate fair value measurements:

 

Level 1

   Inputs used to measure fair value are unadjusted quoted prices available in active markets for the identical assets or liabilities as of the reporting date.

Level 2

   Inputs used to measure fair value, other than quoted prices included in Level 1, are either directly or indirectly observable as of the reporting date through correlation with market data, including quoted prices for similar assets and liabilities in active markets and quoted prices in inactive markets. Level 2 also includes assets and liabilities valued using models or other pricing methodologies that do not require significant judgment since the input assumptions used in the models, such as interest rates and volatility factors, are corroborated by readily observable data from actively quoted markets for substantially the full term of the financial instrument.

Level 3

   Inputs used to measure fair value are unobservable inputs supported by little or no market activity and reflect the use of significant management judgment. These values are generally determined using pricing models for which the assumptions utilize management’s estimates of market participant assumptions.

The Company uses the fair value option for certain financial assets, which allows an entity the irrevocable option to elect fair value for the initial and subsequent measurement for specified financial assets and liabilities on a case-by-case basis.

Allowance for doubtful accounts

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments, based on assessments of customers’ credit-risk profiles and payment

 

47


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

histories. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company does not require collateral from its customers.

Inventories

Inventories are valued at the lower of cost (determined using the first-in, first-out method) or net realizable value. Fixed production overhead is allocated to the inventory cost per unit based on the normal capacity of the production facilities. Abnormal production costs, including fixed cost variances from normal production capacity, if any, are charged to cost of revenues in the period incurred. All shipping and handling costs incurred in connection with the sale of products are included in cost of revenues.

The Company provides reserves for inventories estimated to be excess, obsolete or unmarketable. The Company’s estimation process for assessing net realizable value is based upon its known backlog, projected future demand and expected market conditions. If the Company’s estimated demand and/or market expectation were to change or if product sales were to decline, the Company’s estimation process may cause larger inventory reserves to be recorded, resulting in larger charges to cost of revenues.

Concentrations of risk

Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of cash and cash equivalents, long-term investments and trade accounts receivable. The Company maintains cash and cash equivalents and certain other financial instruments with various large financial institutions. Generally, amounts invested with these financial institutions are in excess of FDIC insurance limits. The Company has not experienced any losses in such accounts and management believes the Company is not exposed to significant credit risk. The Company’s long-term investments consist of highly rated (AAA/Aaa) municipal and corporate debt securities in which a significant portion are invested in auction rate securities. As of December 31, 2011, the Company was holding a total of approximately $9,100,000 in auction rate securities, the significant majority of which are student loan backed securities. Through December 31, 2011, auctions held for all of the Company’s auction rate securities have failed. The funds associated with auction rate securities that have failed auction may not be accessible until a successful auction occurs, a buyer is found outside of the auction process, the security is called, or the underlying securities have matured. If the credit rating of the issuer of any auction rate security held deteriorates, the Company may be required to adjust the carrying value of the investment for an other-than-temporary decline in value through an impairment charge. The Company’s investment policy, approved by the Board of Directors, limits the amount the Company may invest in any issuer, thereby reducing credit risk concentrations.

The Company’s products are sold worldwide to customers ranging from smaller, independent manufacturers of highly specialized electronic devices to larger original equipment manufacturers (“OEMs”) and their contract manufacturers. The applications in which these products are used are in the higher-performance, higher-power segments of the power systems market, including, in alphabetical order, aerospace and defense electronics, enterprise and high performance computing, industrial automation, telecommunications and networking infrastructure, test and measurement instrumentation, and vehicles and transportation. While, overall, the Company has a broad customer base and sells into a variety of industries, the Company’s V*I Chip subsidiary has derived a substantial portion of its revenue from one customer and the Company’s Picor subsidiary has derived a substantial portion of its revenue from a limited number of customers. This concentration of revenue is a reflection of the relatively early stage of adoption of the technologies, architectures and products offered by these subsidiaries, and their targeting of market leading innovators as initial customers. Concentrations of credit risk with respect to trade accounts receivable are limited due to the number of entities comprising the Company’s customer base. As of December 31, 2011, one customer accounted for approximately 15.4% of trade account receivables. Credit losses have consistently been within management’s expectations.

 

48


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Components and materials used in the Company’s products are purchased from a variety of vendors. While most of the components are available from multiple sources, some key components for certain V*I Chip and Picor products, in particular, are supplied by single vendors. In instances of single source items, the Company maintains levels of inventories management consider to be appropriate to enable meeting the delivery requirements of customers. If suppliers or subcontractors cannot provide their products or services on time or to the required specifications, the Company may not be able to meet the demand for its products and its delivery times may be negatively affected.

Goodwill, other intangible assets, and long-lived assets

The Company performs a test of goodwill for potential impairment at least annually. Values assigned to patents are amortized using the straight-line method over periods ranging from three to twenty years.

Long-lived assets such as property, plant and equipment and intangible assets, are included in impairment evaluations when events or circumstances exist that indicate the carrying amount of those assets may not be recoverable. If the impairment evaluation indicates the affected asset is not recoverable, the asset’s carrying value would be reduced to fair value. No event has occurred that would suggest any impairment in the value of long-lived assets recorded in the accompanying Consolidated Financial Statements.

Other investments

The Company accounts for its investment in Great Wall Semiconductor Corporation (“GWS”) under the equity method of accounting.

Advertising expense

The cost of advertising is expensed as incurred. The Company incurred $1,645,000, $2,378,000 and $1,969,000 in advertising costs during 2011, 2010 and 2009, respectively.

Product warranties

The Company generally offers a two-year warranty for all of its products. The Company provides for the estimated cost of product warranties at the time product revenue is recognized. Factors that affect the Company’s warranty reserves include the number of units sold, historical and anticipated rates of warranty returns and the cost per return. The Company periodically assesses the adequacy of the warranty reserves and adjusts the amounts as necessary. Warranty obligations are included in “Accrued expenses” in the accompanying Consolidated Balance Sheets.

 

49


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Net income per common share

The Company computes basic earnings per share using the weighted average number of common shares outstanding and diluted earnings per share using the weighted average number of common shares outstanding plus the effect of outstanding dilutive stock options, if any. The following table sets forth the computation of basic and diluted income per share for the years ended December 31 (in thousands, except per share amounts):

 

     2011      2010      2009  

Numerator:

        

Net income attributable to Vicor Corporation

   $ 8,843      $ 33,325      $ 2,798  
  

 

 

    

 

 

    

 

 

 

Denominator:

        

Denominator for basic income per share-weighted average shares (1)

     41,797        41,700        41,665  

Effect of dilutive securities:

        

Employee stock options (2)

     59        72        6  
  

 

 

    

 

 

    

 

 

 

Denominator for diluted income per share — adjusted weighted-average shares and assumed conversions (3)

     41,856        41,772        41,671  
  

 

 

    

 

 

    

 

 

 

Basic income per share

   $ 0.21      $ 0.80      $ 0.07  
  

 

 

    

 

 

    

 

 

 

Diluted income per share

   $ 0.21      $ 0.80      $ 0.07  
  

 

 

    

 

 

    

 

 

 

 

(1) Denominator represents weighted average number of Common Shares and Class B Common Shares outstanding.

 

(2) Options to purchase 305,268, 345,998 and 720,823 shares of Common Stock were outstanding in 2011, 2010 and 2009, respectively, but were not included in the computation of diluted income per share because the options’ exercise prices were greater than the average market price of the Common Stock and, therefore, the effect would have been antidilutive.

 

(3) Denominator represents weighted average number of Common Shares and Class B Common Shares outstanding for the year, adjusted to include the dilutive effect, if any, of outstanding options.

Income taxes

Deferred tax assets and liabilities are determined based on the differences between financial reporting and tax bases of assets and liabilities and are measured using the enacted income tax rates and laws that are expected to be in effect when the temporary differences are expected to reverse. Deferred tax assets are reduced by a valuation allowance if it is more likely than not that some portion or all of the deferred tax assets will not be realized. Additionally, deferred tax assets and liabilities are separated into current and noncurrent amounts based on the classification of the related assets and liabilities for financial reporting purposes or the expected reversal.

The Company follows a two-step process to determine the amount of tax benefit to recognize. First, the tax position must be evaluated to determine the likelihood that it will be sustained upon examination by a tax authority. If the tax position is deemed “more-likely-than-not” to be sustained, the tax position is then assessed to determine the amount of benefit to recognize in the financial statements. The amount of the benefit that may be recognized is the largest amount that has a greater than 50 percent likelihood of being realized upon ultimate settlement. If the tax position does not meet the “more-likely-than-not” threshold then it is not recognized in the financial statements. Additionally, the Company accrues interest and penalties, if any, related to unrecognized tax benefits as a component of income tax expense.

 

50


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Stock-based compensation

The Company uses the Black-Scholes option-pricing model to calculate the grant-date fair value of stock option awards. The resulting compensation expense, net of expected forfeitures, for non performance-based stock options is recognized on a straight-line basis over the service period of the award, which is generally five years for stock options. For stock options with performance-based vesting provisions, recognition of compensation expense, net of expected forfeitures, commences if and when the achievement of the performance criteria is deemed probable. The compensation expense, net of expected forfeitures, for performance-based stock options is recognized over the relevant performance period.

Use of estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingencies at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Such estimates relate to the useful lives of fixed assets and identified intangible assets, fair value of long-term investments, allowances for doubtful accounts, the net realizable value of inventory, potential reserves relating to litigation matters, accrued liabilities, accrued taxes, deferred tax valuation allowances, assumptions pertaining to share-based payments and other reserves. Actual results could differ from those estimates, and such differences may be material to the financial statements.

Comprehensive income (loss)

The components of comprehensive income (loss) include, in addition to net income (loss), unrealized gains and losses on investments, net of tax and foreign currency translation adjustments related to VJCL.

Impact of recently issued accounting standards

The Company will be adopting new accounting guidance related to the presentation of comprehensive income beginning January 1, 2012. The new accounting guidance will allow the Company the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. With both choices, the Company will be required to present each component of net income along with total net income, each component of other comprehensive income along with a total for other comprehensive income, and a total amount for comprehensive income. This will eliminate the option to present the components of other comprehensive income as part of the statement of changes in stockholders’ equity. The new accounting guidance will not change the items that must be reported in other comprehensive income or when an item of other comprehensive income must be reclassified to net income. While the Company has not decided which presentation option it will select, the Company does not believe the adoption of this new guidance will have a material effect on the Company’s financial position or results of operations.

The Company will be adopting new accounting guidance related to fair value measurement beginning January 1, 2012, which will result in common fair value measurement and disclosure requirements in U.S. Generally Accepted Accounting Principles (“U.S. GAAP”) and International Financial Reporting Standards. Consequently, the new guidance changes the wording used to describe many of the requirements in U.S. GAAP for measuring fair value and for disclosing information about fair value measurements. For many of the requirements, the Financial Accounting Standards Board does not intend for this new guidance to result in a change in the application of the requirements in ASC Topic 820 (“Fair Value Measurements and Disclosure”). The amendments to the guidance are to be applied prospectively and are effective during interim and annual periods beginning after December 15, 2011. The Company does not believe the adoption of this new guidance will have a material effect on the Company’s financial position or results of operations.

 

51


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Effective October 1, 2011, the Company adopted new accounting guidance related to testing goodwill for impairment. The guidance permits an entity to first assess qualitative factors to determine whether it is “more likely than not” that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is then necessary to perform the two-step goodwill impairment test. The more-likely-than-not threshold is defined as having a likelihood of more than 50%. While the guidance is effective for annual and interim goodwill impairment tests performed for fiscal years beginning after December 15, 2011, early adoption is permitted. The adoption of this new guidance did not have a material effect on the Company’s financial position or results of operations.

3.   STOCK-BASED COMPENSATION AND EMPLOYEE BENEFIT PLANS

Vicor currently grants stock options under the following equity compensation plans that are shareholder-approved:

Amended and Restated 2000 Stock Option and Incentive Plan (the “Vicor 2000 Plan”) — Under the Vicor 2000 Plan, the Board of Directors or the Compensation Committee of the Board of Directors may grant stock incentive awards based on the Company’s Common Stock, including stock options, stock appreciation rights, restricted stock, performance shares, unrestricted stock, deferred stock and dividend equivalent rights. Awards may be granted to employees and other key persons, including non-employee directors. Incentive stock options may be granted to employees at a price at least equal to the fair market value per share of the Common Stock on the date of grant, and non-qualified options may be granted to non-employee directors at a price at least equal to 85% of the fair market value of the Common Stock on the date of grant. A total of 4,000,000 shares of Common Stock have been reserved for issuance under the Vicor 2000 Plan. The period of time during which an option may be exercised and the vesting periods are determined by the Compensation Committee. The term of each option may not exceed ten years from the date of grant.

1998 Stock Option and Incentive Plan (the “Vicor 1998 Plan”) — The Vicor 1998 Plan permitted the grant of share options to its employees and other key persons, including non-employee directors for the purchase of up to 2,000,000 shares of common stock. As a result of the approval of the Vicor 2000 Plan, no further grants were made under the Vicor 1998 Plan.

1993 Stock Option Plan (the “Vicor 1993 Plan”) — The Vicor 1993 Plan permitted the grant of share options to its employees and non-employee directors for the purchase of up to 4,000,000 shares of common stock. As a result of the approval of the Vicor 2000 Plan, no further grants were made under the 1993 Plan.

Picor Corporation (“Picor”), a privately held majority-owned subsidiary of Vicor, currently grants stock options under the following equity compensation plan that has been approved by its Board of Directors:

2001 Stock Option and Incentive Plan, as amended (the “2001 Picor Plan”) — Under the 2001 Picor Plan, the Board of Directors of Picor may grant stock incentive awards based on the Picor Common Stock, including stock options, restricted stock or unrestricted stock. Awards may be granted to employees and other key persons, including non-employee directors and full or part-time officers. Incentive stock options may be granted to employees at a price at least equal to the fair market value per share of the Picor Common Stock, based on judgments made by the Company, on the date of grant. A total of 80,000,000 shares of Picor Common Stock have been reserved for issuance under the 2001 Picor Plan. The period of time during which an option may be exercised and the vesting periods are determined by the Picor Board of Directors. The term of each option may not exceed ten years from the date of grant.

V*I Chip Corporation (“V*I Chip”), a privately held wholly-owned subsidiary of Vicor, currently grants stock options under the following equity compensation plan that has been approved by its Board of Directors:

2007 Stock Option and Incentive Plan, as amended (the “2007 V*I Chip Plan”) — Under the 2007 V*I Chip Plan, the Board of Directors of V*I Chip may grant stock incentive awards based on the V*I Chip

 

52


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Common Stock, including stock options, restricted stock or unrestricted stock. Awards may be granted to employees and other key persons, including non-employee directors and full or part-time officers. Incentive stock options may be granted to employees at a price at least equal to the fair market value per share of the V*I Chip Common Stock, based on judgments made by the Company, on the date of grant. A total of 100,000,000 shares of V*I Chip Common Stock have been reserved for issuance under the 2007 V*I Chip Plan. The period of time during which an option may be exercised and the vesting periods are determined by the V*I Chip Board of Directors. The term of each option may not exceed ten years from the date of grant.

All non performance-based option awards are granted at an exercise price equal to or greater than the market price for Vicor at the date of the grant, and are granted at a price equal to or greater than the estimated fair value for both Picor and V*I Chip at the date of grant. Options generally vest over various periods of up to five years and may be exercised for up to 10 years from the date of grant, which is the maximum contractual term. The Company uses the graded attribution method to recognize expense for all stock-based awards.

During the third quarter of 2010, the Company granted 1,243,750 non-qualified stock options under the Vicor 2000 Plan, with performance-based vesting provisions tied to achievement of certain quarterly revenue targets by the Brick Business Unit. Under the accounting rules for performance-based awards, the Company is required to assess, on an ongoing basis, the probability of whether the performance criteria will be achieved. If and when achievement is deemed probable, the Company will begin to recognize the associated compensation expense for the stock options over the relevant performance period. As of December 31, 2011, the Company determined that it was not probable that the revenue targets could be achieved and, accordingly, has not recorded compensation expense relating to these options since the grant date. The unrecognized compensation expense of these performance-based options was approximately $7,790,000 as of December 31, 2011. The fair value for the options was estimated at the date of grant using the Black-Scholes option pricing model.

On December 31, 2010, the Company granted 2,984,250 non-qualified stock options under the 2007 V*I Chip Plan with performance-based vesting provisions tied to achievement of certain margin targets by the V*I Chip Business Unit. As of December 31, 2010, the Company determined that it was probable that the margin targets could be achieved and, accordingly, will begin recording compensation expense relating to these options beginning January 1, 2011. The unrecognized compensation expense of these performance-based options was approximately $1,199,000 as of December 31, 2011. The fair value for the options was estimated at the date of grant using the Black-Scholes option pricing model.

Stock compensation expense for the years ended December 31 was as follows (in thousands):

 

     2011      2010      2009  

Cost of revenues

   $ 68      $ 19      $ 20  

Selling, general and administrative

     1,188        618        456  

Research and development

     667        234        181  
  

 

 

    

 

 

    

 

 

 

Total stock based compensation

   $ 1,923      $ 871      $ 657  
  

 

 

    

 

 

    

 

 

 

The increase in stock compensation expense in 2011 compared to 2010 was primarily due to the recording of compensation expense for the V*I Chip performance-based options beginning on January 1, 2011, and to a grant of Picor stock options to all Picor employees in the fourth quarter of 2010.

During the third quarter of 2011, the Picor Board of Directors (the “Picor Board”) authorized different alternatives of net settlement to holders of Picor stock options in the tenth and final year of their respective terms. In addition, the Picor Board approved an offer to repurchase up to 1,142,000 shares of Picor Common Stock from a limited number of holders who purchase these shares via exercise before October 31, 2011. As a result, the

 

53


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Company accrued $368,000 in the third quarter of 2011, representing the maximum repurchase obligation to these holders assuming all holders sold their shares. This resulted in additional stock-based compensation expense of $169,000 and $132,000 in Selling, general and administrative and Research and development expense, respectively, along with a charge of $67,000 against Additional paid-in-capital, in the third quarter of 2011. During the fourth quarter of 2011, the Company accounted for those options for which repurchase was ultimately not elected by the holder, reducing the accrual by $106,000, with the offset to Picor’s additional paid-in capital.

The fair value for the options was estimated at the date of grant using a Black-Scholes option pricing model under all methods with the following weighted-average assumptions:

 

     Non Performance-
based  Stock
Options (1)
    Performance-
based Stock
Options (2)
 

Vicor:

   2011     2010     2009     2010  

Risk-free interest rate

     1.8     2.3     1.1     2.0-2.7

Expected dividend yield

     1.6     1.6     1.0     2.5

Expected volatility

     54     54     67     55

Expected lives (years)

     5.0       3.9       2.7       6.5-9.5   

V*I Chip:

   2011     2010     2009     2010  

Risk-free interest rate

     1.5     2.7            2.7

Expected dividend yield

                            

Expected volatility

     49     49            49

Expected lives (years)

     6.5       6.5              6.5  

Picor:

   2011     2010     2009        

Risk-free interest rate

     1.6     2.0         

Expected dividend yield

                       

Expected volatility

     52     52         

Expected lives (years)

     6.5       6.5           

 

(1) There were no Picor or V*I Chip options granted during 2009.

 

(2) There were no Vicor or V*I Chip performance-based options granted in 2011 or prior to 2010.

Risk-free interest rate:

Vicor — The Company uses the yield on zero-coupon U.S. Treasury “Strip” securities for a period that is commensurate with the expected term assumption for each vesting period.

Picor and V*I Chip — Picor and V*I Chip use the yield to maturity of a seven-year U.S. Treasury bond, as it most closely aligns to the expected exercise period.

Expected dividend yield:

Vicor — The Company determines the expected dividend yield by annualizing the most recent prior cash dividends declared by the Company’s Board of Directors and dividing that result by the closing stock price on the date of that dividend declaration. Dividends are not paid on options.

Picor and V*I Chip — Picor and V*I Chip have not and do not expect to declare and pay dividends in the foreseeable future. Therefore, the expected dividend yield is not applicable.

 

54


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Expected volatility:

Vicor — Vicor uses historical volatility to estimate the grant-date fair value of the options, using the expected term for the period over which to calculate the volatility (see below). The Company does not expect its future volatility to differ from its historical volatility. The computation of the Company’s volatility is based on a simple average calculation of monthly volatilities over the expected term.

Picor — As Picor is a nonpublic entity, historical volatility information is not available. An industry sector index of seven publicly traded fabless semiconductor firms was developed for calculating historical volatility for Picor. Historical prices for each of the companies in the index based on the market price of the shares on each day of trading over the expected term were used to determine the historical volatility.

V*I Chip — As V*I Chip is a nonpublic entity, historical volatility information is not available. An industry sector index of twelve publicly traded fabless semiconductor firms was developed for calculating historical volatility for V*I Chip. Historical prices for each of the companies in the index based on the market price of the shares on each day of trading over the expected term were used to determine the historical volatility.

Expected term:

Vicor — The Company uses historical employee exercise and option expiration data to estimate the expected term assumption for the Black-Scholes grant-date valuation. The Company believes that this historical data is currently the best estimate of the expected term of options, and that generally all groups of the Company’s employees exhibit similar exercise behavior.

Picor and V*I Chip — Due to the lack of historical information, the “simplified” method as prescribed by the Security and Exchange Commission was used to determine the expected term on grant awards that meet the definition of “plain vanilla”. For options that did not meet the criteria of “plain vanilla”, the Company calculated the expected term based on its best estimate of what the expected term would be.

Forfeiture rate:

The amount of stock-based compensation recognized during a period is based on the value of the portion of the awards that are ultimately expected to vest. Forfeitures are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. The term “forfeitures” is distinct from “cancellations” or “expirations” and represents only the unvested portion of the surrendered option. The forfeiture analysis is re-evaluated quarterly and the forfeiture rate is adjusted as necessary. Ultimately, the actual expense recognized over the vesting period will only be for those shares that vest.

Vicor — The Company currently expects that for Vicor options, based on an analysis of its historical forfeitures, that approximately 76% of its options will actually vest, and therefore has applied an annual forfeiture rate of 9.0% to all unvested options as of December 31, 2011. For 2010, the Company expected 71% of its options would actually vest and applied an annual forfeiture rate of 11.25%.

Picor — The Company currently expects that for Picor options, based on an analysis of its historical forfeitures, that approximately 92% of its options will actually vest, and therefore has applied an annual forfeiture rate of 2.75% to all unvested options as of December 31, 2011. For 2010, the Company expected 94% of its options would actually vest and applied an annual forfeiture rate of 2.0%.

V*I Chip — The Company currently expects that for V*I Chip options, based on an analysis of its historical forfeitures, that approximately 81% of its options will actually vest, and therefore has applied an annual forfeiture rate of 7.0% to all unvested options as of December 31, 2011. For 2010, the Company expected 83% of its options would actually vest and applied an annual forfeiture rate of 6.25%.

 

55


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Vicor Stock Options

A summary of the activity under the Company’s stock option plans as of December 31, 2011 and changes during the year then ended, is presented below (in thousands except for share and weighted-average data):

 

     Options
Outstanding
    Weighted-
Average
Exercise
Price
     Weighted-
Average
Remaining
Contractual
Life in Years
     Aggregate
Intrinsic
Value
 

Outstanding on December 31, 2010

     1,798,327       13.95        

Granted

     207,876       14.12        

Forfeited and expired

     (209,690     18.89        

Exercised

     (40,698     10.97        
  

 

 

         

Outstanding on December 31, 2011

     1,755,815       13.45        7.75      $ 76  
  

 

 

         

Exercisable on December 31, 2011

     232,078       12.00        2.85      $ 65  
  

 

 

         

Vested or expected to vest as of December 31, 2011 (1)

     1,040,362       13.27        7.11      $ 74  
  

 

 

         

 

(1) In addition to the vested options, the Company expects a portion of the unvested options to vest at some point in the future. Options expected to vest is calculated by applying an estimated forfeiture rate to the unvested options.

As of December 31, 2010 and 2009, the Company had shares exercisable of 359,264 and 575,482 respectively, for which the weighted average exercise prices were $15.89 and $19.12, respectively.

During the years ended December 31, 2011, 2010, and 2009 under all plans, the total intrinsic value of Vicor options exercised (i.e. the difference between the market price at exercise and the price paid by the employee to exercise the options) was $217,000, $723,000 and $1,000, respectively. The total amount of cash received by the Company from options exercised in 2011 was $447,000. The total grant-date fair value of stock options that vested during the years ended December 31, 2011, 2010 and 2009 was approximately $411,000, $422,000, and $432,000, respectively.

As of December 31, 2011, there was $881,000 of total unrecognized compensation cost related to unvested non-performance share-based awards for Vicor. That cost is expected to be recognized over a weighted-average period of 7.34 years for all Vicor awards. The expense will be recognized as follows: $457,000 in 2012, $241,000 in 2013, $116,000 in 2014, $56,000 in 2015, and $11,000 in 2016. In addition, as of December 31, 2011, there was $7,790,000 of unrecognized compensation cost related to performance-based options, for which expensing has not commenced.

The weighted-average fair value of Vicor options granted was $5.79, $4.78 and $2.69 in 2011, 2010 and 2009, respectively. The weighted-average contractual life for Vicor options outstanding as of December 31, 2011 is 7.7 years.

 

56


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Picor Stock Options

A summary of the activity under the 2001 Picor Plan as of December 31, 2011 and changes during the year then ended, is presented below (in thousands except for share and weighted-average data):

 

     Options
Outstanding
    Weighted-
Average
Exercise
Price
     Weighted-
Average
Remaining
Contractual
Life in Years
     Aggregate
Intrinsic
Value
 

Outstanding on December 31, 2010

     10,001,763       0.59        

Granted

     895,000       0.62        

Forfeited and expired

     (104,780     0.69        

Exercised

     (812,000     0.25        
  

 

 

         

Outstanding on December 31, 2011

     9,979,983       0.62        6.76      $ 1,023  
  

 

 

         

Exercisable on December 31, 2011

     4,684,585       0.64        4.30      $ 556  
  

 

 

         

Vested or expected to vest as of December 31, 2011 (1)

     9,706,872       0.62        6.56      $ 998  
  

 

 

         

 

(1) In addition to the vested options, the Company expects a portion of the unvested options to vest at some point in the future. Options expected to vest is calculated by applying an estimated forfeiture rate to the unvested options.

As of December 31, 2010 and 2009, Picor had shares exercisable of 4,213,640 and 3,977,940, respectively, for which the weighted average exercise prices were $0.56 and $0.54, respectively.

During the year ended December 31, 2011, the total intrinsic value of Picor options exercised was $262,000. The total amount of cash received by the Company from options exercised in 2011 was $5,000. For years ended 2010 and 2009, Picor did not have any options exercised. The total grant-date fair value of stock options that vested during the years ended December 31, 2011, 2010 and 2009 was approximately $357,000, $68,000, and $189,000, respectively.

As of December 31, 2011, there was $1,335,000 of total unrecognized compensation cost related to unvested share-based awards for Picor. That cost is expected to be recognized over a weighted-average period of 3.7 years for all Picor awards. The expense will be recognized as follows: $394,000 in 2012, $352,000 in 2013, $311,000 in 2014, $248,000 in 2015, and $30,000 in 2016.

The weighted-average fair value of Picor options granted was $0.32 and $0.30 in 2011 and 2010, respectively. The weighted-average contractual life for Picor options outstanding as of December 31, 2011 is 6.6 years.

 

57


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

V*I Chip Stock Options

A summary of the activity under the 2007 V*I Chip Plan as of December 31, 2011 and changes during the year then ended, is presented below (in thousands except for share and weighted-average data):

 

     Options
Outstanding
    Weighted-
Average
Exercise
Price
     Weighted-
Average
Remaining
Contractual
Life in Years
     Aggregate
Intrinsic
Value
 

Outstanding on December 31, 2010

     10,790,250       1.00        

Granted

     122,250       1.04        

Forfeited and expired

     (397,750     1.01        

Exercised

                    
  

 

 

         

Outstanding on December 31, 2011 (2)

     10,514,750       1.00        6.48      $   
  

 

 

         

Exercisable on December 31, 2011

     5,869,100       1.00        5.44      $   
  

 

 

         

Vested or expected to vest as of December 31, 2011 (1)

     9,733,939       1.00        6.29      $   
  

 

 

         

 

(1) In addition to the vested options, the Company expects a portion of the unvested options to vest at some point in the future. Options expected to vest is calculated by applying an estimated forfeiture rate to the unvested options.

 

(2) Of the total V*I Chip options outstanding on December 31, 2010, 5,500,000 options have been granted to the Company’s Chief Executive Officer.

As of December 31, 2010 and 2009, V*I Chip had shares exercisable of 4,436,200 and 2,987,200, respectively, for which the weighted average exercise price was $1.00. For the years ended December 31, 2011, 2010 and 2009, V*I Chip did not have any options exercised.

As of December 31, 2011, there was $755,000 of total unrecognized compensation cost related to unvested share-based awards for V*I Chip. That cost is expected to be recognized over a weighted-average period of 3.44 years for all V*I Chip awards. The expense will be recognized as follows: $256,000 in 2012, $180,000 in 2013, $159,000 in 2014, $157,000 in 2015 and $3,000 in 2016.

The weighted-average fair value of V*I Chip options granted was $0.53 and $0.50 in 2011 and 2010, respectively. The weighted-average contractual life for V*I Chip options outstanding as of December 31, 2011 is 6.5 years.

401(k) Plan

The Company sponsors a savings plan available to all domestic employees, which qualifies under Section 401(k) of the Internal Revenue Code. Employees may contribute to the plan from 1% to 20% of their pre-tax salary subject to statutory limitations. The Company matches employee contributions to the plan at a rate of 50% up to the first 3% of an employee’s compensation. The Company’s matching contributions currently vest at a rate of 20% per year based upon years of service. The Company’s contribution to the plan was approximately $810,000, $760,000 and $697,000 in 2011, 2010 and 2009, respectively.

Stock Bonus Plan

Under the Company’s 1985 Stock Bonus Plan, as amended, shares of Common Stock may be awarded to employees from time to time as determined by the Board of Directors. On December 31, 2011, 109,964 shares were available for further award. All shares awarded to employees under this plan have vested. No further awards are contemplated under this plan at the present time.

 

58


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

4.  LONG-TERM INVESTMENTS

As of December 31, 2011, the Company held par value of $9,100,000 of auction rate securities. These auction rate securities consist of collateralized debt obligations, supported by pools of student loans, sponsored by state student loan agencies and corporate student loan servicing firms. The interest rates for these securities are reset at auction at regular intervals ranging from seven to 28 days. The auction rate securities held by the Company traded at par prior to February 2008 and are callable at par at the option of the issuer.

Until February 2008, the auction rate securities market was liquid, as the investment banks conducting the periodic “Dutch auctions” by which interest rates for the securities had been established had committed their capital to support such auctions in the event of insufficient third-party investor demand. Starting the week of February 11, 2008, a substantial number of auctions failed, as demand from third-party investors weakened and the investment banks conducting the auctions chose not to commit capital to support such auctions (i.e., investment banks chose not to purchase securities themselves in order to balance supply and demand, thereby facilitating a successful auction, as they had done in the past). The consequences of a failed auction are (a) an investor must hold the specific security until the next scheduled auction (unless that investor chooses to sell the security to a third party outside of the auction process) and (b) the interest rate on the security generally resets to an interest rate set forth in each security’s indenture.

As of December 31, 2011, the Company held auction rate securities that had experienced failed auctions totaling $9,100,000 at par value, all of which had been purchased through and are held by a broker-dealer affiliate of Bank of America, N.A. (the “Failed Auction Securities”). As of December 31, 2011, the majority of the Failed Auction Securities held by the Company were AAA/Aaa rated by the major credit rating agencies, with all of the securities collateralized by student loans, of which most are guaranteed by the U.S. Department of Education under the Federal Family Education Loan Program. Management is not aware of any reason to believe any of the issuers of the Failed Auction Securities held by the Company are presently at risk of default. Through December 31, 2011, the Company has continued to receive interest payments on the Failed Auction Securities in accordance with the terms of their respective indentures. Management believes the Company ultimately should be able to liquidate all of its Failed Auction Securities without significant loss primarily due to the overall quality of the issues held and the collateral securing the substantial majority of the underlying obligations. However, current conditions in the auction rate securities market have led management to conclude the recovery period for the Failed Auction Securities exceeds 12 months. As a result, the Company continued to classify the Failed Auction Securities as long-term as of December 31, 2011.

The following is a summary of available-for-sale securities (in thousands):

 

December 31, 2011    Cost      Gross
Unrealized
Gains
     Gross
Unrealized
Losses
     Estimated Fair
Value
 

Failed Auction Securities

   $ 9,100      $       $ 1,628      $ 7,472  

Brokered certificates of deposit

     1,640        8                1,648  

Certificates of deposit

     465                        465  
  

 

 

    

 

 

    

 

 

    

 

 

 
   $ 11,205      $ 8      $ 1,628      $ 9,585  
  

 

 

    

 

 

    

 

 

    

 

 

 
December 31, 2010    Cost      Gross
Unrealized
Gains
     Gross
Unrealized
Losses
     Estimated Fair
Value
 

Failed Auction Securities

   $ 19,075      $       $ 2,856      $ 16,219  

Brokered certificates of deposit

     1,720        30                1,750  

Certificates of deposit

     448                        448  
  

 

 

    

 

 

    

 

 

    

 

 

 
   $ 21,243      $ 30      $ 2,856      $ 18,417  
  

 

 

    

 

 

    

 

 

    

 

 

 

 

59


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

All of the Failed Auction Securities as of December 31, 2011 and 2010, respectively have been in an unrealized loss position for greater than 12 months.

The amortized cost and estimated fair value of available-for-sale securities on December 31, 2011, by contractual maturities, are shown below (in thousands):

 

     Cost      Estimated
Fair Value
 

Due in one year or less

   $ 630      $ 634  

Due in two to ten years

     1,385        1,387  

Due in ten to twenty years

     3,090        2,729  

Due in twenty to forty years

     6,100        4,835  
  

 

 

    

 

 

 
   $ 11,205      $ 9,585  
  

 

 

    

 

 

 

Based on the fair value measurements described in Note 5, the fair value of the Failed Auction Securities on December 31, 2011, with a par value of $9,100,000, was estimated by the Company to be approximately $7,472,000, an increase in fair value of $1,228,000, net of $9,975,000 of redemptions from December 31, 2010. The gross unrealized loss of $1,628,000 on the Failed Auction Securities consists of two types of estimated loss: an aggregate credit loss of $308,000 and an aggregate temporary impairment of $1,320,000. For the year ended December 31, 2011, the aggregate credit loss on the Failed Auction Securities decreased by a net amount of $302,000, which was recorded in “Net impairment gains (losses) recognized in earnings” in the Consolidated Statement of Operations. In determining the amount of credit loss, the Company compared the present value of cash flows expected to be collected to the amortized cost basis of the securities, considering credit default risk probabilities and changes in credit ratings as significant inputs, among other factors (See Note 5).

The following table represents a rollforward of the activity related to the credit loss recognized in earnings on available-for-sale ARS securities held by the Company for the year ended December 31, 2011 (in thousands):

 

     2011     2010     2009  

Balance at the beginning of the period

   $ 610     $ 464     $   

Reductions for securities sold during the period

     (373     (18     (9

Additions for the amount related to credit loss for which other-than-temporary impairment was not previously recognized

     71       164       467  

Subsequent loss recovery

                   6  
  

 

 

   

 

 

   

 

 

 

Balance at the end of the period

   $ 308     $ 610     $ 464  
  

 

 

   

 

 

   

 

 

 

At this time, the Company has no intent to sell any of the impaired Failed Auction Securities and does not believe it is more likely than not the Company will be required to sell any of these securities. Management expects the securities to regain liquidity as the financial markets recover from the current economic downturn. If current market conditions deteriorate further, the Company may be required to record additional unrealized losses. If the credit rating of the security deteriorates, or the anticipated recovery in the market values does not occur, the Company may be required to adjust the carrying value of these investments through impairment charges recorded in the Consolidated Statement of Operations, and any such impairment adjustments may be material.

Based on the Company’s ability to access cash and cash equivalents and its expected operating cash flows, management does not anticipate the current lack of liquidity associated with the Failed Auction Securities held will affect the Company’s ability to execute its current operating plan.

 

60


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

5.  FAIR VALUE MEASUREMENTS

Assets measured at fair value on a recurring basis include the following as of December 31, 2011 (in thousands):

 

     Using         
     Quoted Prices
in Active
Markets
(Level 1)
     Significant
Other
Observable
Inputs
(Level 2)
     Significant
Unobservable
Inputs

(Level 3)
     Total Fair
Value as of
December 31,
2011
 

Cash Equivalents:

           

Money market funds

   $ 14,940      $       $       $ 14,940  

Long-term investments:

           

Auction rate securities

                     7,472        7,472  

Brokered certificates of deposit

             1,648                1,648  

Certificates of deposit

     465                        465  

The Company has brokered certificates of deposit classified as Level 2 because the fair value for these investments has been determined utilizing observable inputs from non-active markets. The fair values fluctuate with changes in market interest rates obtained from information available in publicly quoted markets. Management tested the reported fair values by comparing them to net present value calculations utilizing a discount rate based on U.S. Treasury “Strip” securities for similar maturities.

As of December 31, 2011, there was insufficient observable auction rate security market information available to determine the fair value of the Failed Auction Securities using Level 1 or Level 2 inputs. As such, the Company’s investments in Failed Auction Securities were deemed to require valuation using Level 3 inputs. Management, after consulting with advisors, valued the Failed Auction Securities using analyses and pricing models similar to those used by market participants (i.e., buyers, sellers, and the broker-dealers responsible for execution of the Dutch auction pricing mechanism by which each issue’s interest rate was set). Management utilized a probability weighted discounted cash flow (“DCF”) model to determine the estimated fair value of these securities as of December 31, 2011. The major assumptions used in preparing the DCF model included: estimates for the amount and timing of future interest and principal payments based on default probability assumptions used to measure the credit loss of 3.3%; the rate of return required by investors to own these securities in the current environment, which we estimate to be 5.0% above the risk free rate of return; and an estimated timeframe of three to five years for successful auctions for these securities to occur. In making these assumptions, management considered relevant factors including: the formula applicable to each security defining the interest rate paid to investors in the event of a failed auction (the “Penalty Rate”); forward projections of the interest rate benchmarks specified in such formulas; the likely timing of principal repayments; the probability of full repayment considering the guarantees by the U.S. Department of Education of the underlying student loans, guarantees by other third parties, and additional credit enhancements provided through other means; and publicly available pricing data for recently issued student loan asset-backed securities not subject to auctions. In developing its estimate of the rate of return required by investors to own these securities, management compared the Penalty Rates of the Failed Auction Securities with yields of actively traded long-term bonds with similar characteristics and, reflecting the limited liquidity for auction rate securities and the discounts to par value seen in recent tender offers by issuers and arms’ length market transactions between informed buyers and sellers, estimated the implied yield (i.e., the discount to par value) necessary to complete a sale of the Failed Auction Securities. Management has calculated an increase or decrease in the liquidity risk premium of 5.0% referenced above of 1.0% (i.e., 100 basis points) as used in the model, would decrease or increase, respectively, the fair value of the Failed Auction Securities by approximately $400,000.

 

61


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

The following table summarizes the change in the fair values for those assets valued on a recurring basis utilizing Level 3 inputs for the year ended December 31, 2011 (in thousands):

 

Balance at the beginning of the period

   $ 16,219  

Redemptions

     (9,975

Credit losses on available for sales securities included in Other income, net

     302  

Unrealized gain included in Other comprehensive (loss) income

     926  
  

 

 

 

Balance at the end of the period

   $ 7,472  
  

 

 

 

6.  INVENTORIES

Inventories as of December 31 were as follows (in thousands):

 

     2011     2010  

Raw materials

   $ 32,213     $ 31,750  

Work-in-process

     3,524       4,182  

Finished goods

     6,382       5,001  
  

 

 

   

 

 

 
     42,119       40,933  

Inventory reserves

     (6,367     (5,444
  

 

 

   

 

 

 

Net balance

   $ 35,752     $ 35,489  
  

 

 

   

 

 

 

7.  PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment are stated at cost and are depreciated and amortized over a period of three to 39 years generally under the straight-line method for financial reporting purposes and accelerated methods for income tax purposes.

Property, plant and equipment as of December 31 were as follows (in thousands):

 

     2011     2010  

Land

   $ 2,089     $ 2,089  

Buildings and improvements

     42,540       41,791  

Machinery and equipment

     213,531       203,744  

Furniture and fixtures

     5,895       5,847  

Construction in-progress and deposits

     1,124       4,499  
  

 

 

   

 

 

 
     265,179       257,970  

Accumulated depreciation and amortization

     (217,938     (207,122
  

 

 

   

 

 

 

Net balance

   $ 47,241     $ 50,848  
  

 

 

   

 

 

 

Depreciation expense for the years ended December 31, 2011, 2010 and 2009 was approximately $11,083,000, $9,778,000, and $9,882,000 respectively. As of December 31, 2011, the Company had approximately $1,024,000 of capital expenditure commitments.

8.  OTHER INVESTMENTS

The Company’s gross investment in non-voting convertible preferred stock of GWS totaled $5,000,000 as of December 31, 2011, and December 31, 2010, giving the Company an approximately 28% ownership interest

 

62


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

in GWS. GWS and its subsidiary design and sell semiconductors, conduct research and development activities, develop and license patents, and litigate against those who infringe upon its patented technologies. A director of the Company is the founder, Chairman of the Board, President and Chief Executive Officer (“CEO”), as well as the majority voting shareholder, of GWS. The Company and GWS are parties to an intellectual property cross-licensing agreement, a license agreement and two supply agreements under which the Company purchases certain components from GWS. Purchases from GWS totaled approximately $5,577,000, $5,362,000 and $1,608,000 in 2011, 2010, and 2009, respectively. The Company owed GWS approximately $500,000 and $555,000 as of December 31, 2011 and 2010, respectively. During 2009, the Company made payments totaling $650,000 under the license agreement.

The Company accounts for its investment in GWS under the equity method of accounting. The Company has determined that, while GWS is a variable interest entity, the Company is not the primary beneficiary. The key factors in the Company’s assessment were that the CEO of GWS has: (i) the power to direct the activities of GWS that most significantly impact its economic performance, and (ii) has an obligation to absorb losses or the right to receive benefits from GWS, respectively, that could potentially be significant to GWS.

There was no allocation of equity method income (loss) in 2011, 2010, and 2009 as GWS incurred a net loss in those years. The balance in the Company’s net investment in GWS was zero as of December 31, 2011 and 2010.

9.  GOODWILL AND OTHER INTANGIBLE ASSETS

The Company tests goodwill and other indefinite lived intangible assets for impairment at least annually at the reporting unit level. Definite lived intangible assets, such as patent rights, are amortized and tested for impairment at least annually at the reporting unit level. The Company reassessed the carrying value of its goodwill of approximately $2,000,000 related to the operations of one of its subsidiaries, VJCL, during the fourth quarter of fiscal 2011 and determined that it was not more likely than not that the carrying value exceeded the fair value.

Patent costs, which are included in other assets in the accompanying balance sheets, as of December 31 were as follows (in thousands):

 

     2011     2010  

Patent costs

   $ 3,353     $ 3,459  

Accumulated amortization

     (1,877     (1,827
  

 

 

   

 

 

 
   $ 1,476     $ 1,632  
  

 

 

   

 

 

 

In 2010, the Company wrote off patent costs associated with abandoned patents with net book values of approximately $19,000, which was charged to amortization expense (none in 2011). Patent renewal fees were $47,000 and $55,000 in 2011 and 2010, respectively.

Amortization expense was approximately $325,000, $318,000 and $254,000 in 2011, 2010 and 2009, respectively. The estimated future amortization expense from patent assets held as of December 31, 2011, is projected to be $188,000, $181,000, $167,000, $138,000, and $125,000, in fiscal years 2012, 2013, 2014, 2015, and 2016, respectively.

During the second quarter of 2009, the Company entered into a license agreement with GWS in which the Company paid $500,000 to obtain certain rights to several GWS semiconductor devices (See Note 8). The

 

63


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

amount is being amortized on a straight-line basis over four years, and is included in “Other assets” in the accompanying Consolidated Balance Sheets. Balances as of December 31 were as follows (in thousands):

 

     2011     2010  

GWS intangibles

   $ 500     $ 500  

Accumulated amortization

     (312     (187
  

 

 

   

 

 

 
   $ 188     $ 313  
  

 

 

   

 

 

 

The estimated future amortization expense from GWS intangible assets held as of December 31, 2011, is projected to be $125,000, $63,000 in fiscal years 2012 and 2013, respectively.

10.  SEVERANCE CHARGES

During 2009, the Company initiated workforce reductions and recorded pre-tax charges for the cost of severance and other employee-related costs involving cash payments during 2009 and 2010 based on each employee’s respective length of service. Total severance charges of $4,099,000 were recorded as “Severance charges” in the Consolidated Statement of Operations. There was no remaining liability under this program as of December 31, 2010.

11.  PRODUCT WARRANTIES

Product warranty activity for the years ended December 31 was as follows (in thousands):

 

     2011     2010     2009  

Balance at the beginning of the period

   $ 649     $ 772     $ 896  

Accruals for warranties for products sold in the period

     1,392       573       205  

Fulfillment of warranty obligations

     (1,134     (548     (101

Revisions of estimated obligations

     (335     (148     (228
  

 

 

   

 

 

   

 

 

 

Balance at the end of the period

   $ 572     $ 649     $ 772  
  

 

 

   

 

 

   

 

 

 

12.  STOCKHOLDERS’ EQUITY

In November 2000, the Board of Directors of the Company authorized the repurchase of up to $30,000,000 of the Company’s Common Stock (the “November 2000 Plan”). The plan authorizes the Company to make repurchases from time to time in the open market or through privately negotiated transactions. The timing of this program and the amount of the stock that may be repurchased is at the discretion of management based on its view of economic and financial market conditions. There were no repurchases under the November 2000 Plan in 2011, 2010 or 2009. On December 31, 2011 and 2010, the Company had approximately $8,541,000 available for use under the November 2000 Plan.

Common Stock

Each share of Common Stock entitles the holder thereof to one vote on all matters submitted to the stockholders.

 

64


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

Each share of Class B Common Stock entitles the holder thereof to ten votes on all such matters.

Shares of Class B Common Stock are not transferable by a stockholder except to or among the stockholder’s spouse, certain of the stockholder’s relatives, and certain other defined transferees. Class B Common Stock is not listed or traded on any exchange or in any market. Class B Common Stock is convertible at the option of the holder thereof at any time and without cost to the stockholder into shares of Common Stock on a one-for-one basis.

Dividends are declared at the discretion of the Company’s Board of Directors and depend on actual cash from operations, the Company’s financial condition and capital requirements and any other factors the Company’s Board of Directors may consider relevant.

On June 28, 2010, the Company’s Board of Directors approved a cash dividend of $0.30 per share of the Company’s stock. The total dividend of approximately $12,506,000 was paid on July 30, 2010 to shareholders of record at the close of business on July 16, 2010.

On July 22, 2011, the Company’s Board of Directors approved a cash dividend of $0.15 per share of the Company’s stock. The total dividend of approximately $6,272,000 was paid on August 31, 2011 to shareholders of record at the close of business on August 9, 2011.

During the year ended December 31, 2009, two subsidiaries paid a total of $4,690,000 in cash dividends on subsidiary common stock, of which $3,421,000 was paid to the Company and $1,269,000 was paid to outside shareholders. During the year ended December 31, 2010, three subsidiaries paid a total of $5,457,000 in cash dividends, of which $4,905,000 was paid to the Company and $552,000 was paid to outside shareholders. During the year ended December 31, 2011, two subsidiaries paid a total of $2,000,000 in cash dividends, of which $1,310,000 was paid to the Company and $690,000 was paid to outside shareholders. Dividends paid to outside shareholders are accounted for as a reduction in noncontrolling interest.

During 2011, a total of 40,698 shares of Common Stock were issued upon the exercise of stock options. There were no shares of Class B Common Stock converted into Common Stock during 2011.

On December 31, 2011, there were 14,858,774 shares of Vicor Common Stock reserved for issuance under Vicor stock options and upon conversion of Class B Common Stock.

13.  OTHER INCOME, NET

The major changes in the components of the other income, net for the years ended December 31 were as follows (in thousands):

 

     2011     2010     2009  

Interest income

   $ 259     $ 442     $ 717  

Unrealized gain on trading securities

            970       1,268  

Unrealized loss on auction rate securities rights

            (962     (964

Credit gains (losses) on available for sale securities

     302       (146     (464

Foreign currency (losses) gains, net

     (326     (158     35  

Gain on disposal of equipment

     22       249       30  

Other

     89       102       60  
  

 

 

   

 

 

   

 

 

 
   $ 346     $ 497     $ 682  
  

 

 

   

 

 

   

 

 

 

 

65


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

14.  INCOME TAXES

Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of the Company’s deferred tax assets and liabilities as of December 31 were as follows (in thousands):

 

     2011     2010  

Deferred tax assets:

    

Research and development tax credit carryforwards

   $ 8,707     $ 7,772  

Inventory reserves

     2,255       1,905  

Stock-based compensation

     1,830       1,224  

Vacation accrual

     1,543       1,500  

Investment tax credit carryforwards

     1,381       1,249  

Net operating loss carryforwards

     1,201       1,075  

Capital loss carryforward

     700       700  

Deferred revenue

     635       395  

Alternative minimum tax credit carryforward

     556       1,045  

Unrealized loss on investments

     568       1,023  

Warranty reserves

     144       189  

Bad debt reserves

     92       103  

Other

     855       588  
  

 

 

   

 

 

 

Total deferred tax assets

     20,467       18,768  

Less: Valuation allowance for deferred tax assets

     (9,736     (10,259
  

 

 

   

 

 

 

Net deferred tax assets

     10,731       8,509  

Deferred tax liabilities:

    

Depreciation

     (3,251     (1,564

Prepaid expenses

     (660       

Goodwill

     (628     (549

Patent amortization

     (544     (594

Unremitted Vicor Custom earnings

     (337     (320

Other

     (593     (513
  

 

 

   

 

 

 

Total deferred tax liabilities

     (6,013     (3,540
  

 

 

   

 

 

 

Net deferred tax assets

   $ 4,718     $ 4,969  
  

 

 

   

 

 

 

In 2011 and 2010, the tax provision is based on the annual effective tax rate for the year, which includes estimated federal, state and foreign income taxes on the Company’s pre-tax income and estimated federal and state income taxes for certain noncontrolling interest subsidiaries that are not part of the Company’s consolidated income tax returns, offset in 2010 by the expected utilization of federal and foreign net operating loss carryforwards.

Prior to September 30, 2010, the Company maintained a valuation allowance against a significant portion of its deferred tax assets, consisting of net operating loss carryforwards, tax credit carryforwards and deductible temporary differences. Based on the Company’s pre-tax income for the nine months ended September 30, 2010 being sufficient to fully utilize its net operating loss carryforwards, a history of cumulative earnings before taxes for financial reporting purposes over a 12-quarter period, and expected future taxable income, management determined it was more likely than not a significant portion of the deferred tax assets would be realized. As a result, at September 30, 2010, the Company determined that it was appropriate to reverse a portion of its

 

66


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

valuation allowance by $5,158,000 as a discrete benefit for income taxes for certain deductible temporary differences expected to be realized in future periods. An additional benefit of $1,159,000 was recorded in the fourth quarter of 2010. Management could not make such a determination in the prior quarters of fiscal 2010 due to a lack of confidence in being able to accurately forecast the expected ordinary income (loss) for the year largely due to global economic conditions and the possible impact continued economic and business uncertainty would have on the Company’s business at those times. The 2011 and 2010 tax provisions also include discrete items, principally related to tax credits and expense for net increases in state taxes and accrued interest for potential liabilities.

The tax provision in 2009 provided for estimated income taxes due in various state and international taxing jurisdictions for which losses incurred by the Company cannot be offset, and for estimated federal and state income taxes for certain noncontrolling interests that are not part of the Company’s consolidated income tax returns, offset by the expected utilization of federal and foreign net operating loss carryforwards. The 2009 tax provision also includes discrete items, including benefits for the receipt of refunds for net operating loss carryback claims and for an expected refund due to certain monetized credits, and expense for increases in state taxes and accrued interest for potential liabilities.

As of December 31, 2011, the Company has a remaining valuation allowance of approximately $9,736,000 against certain deferred tax assets, for which realization cannot be considered more likely than not at this time. Such deferred tax assets principally relate to tax credit carryforwards in certain state tax jurisdictions for which sufficient taxable income for utilization cannot be projected at this time or the credits may expire without being utilized. Management assesses the need for the valuation allowance on a quarterly basis. If and when management determines the valuation allowance should be released, the adjustment would result in a tax benefit in the Consolidated Statements of Operations and may include a portion to be accounted for through “Additional paid-in capital”, a component of Stockholders’ Equity. The amount of the tax benefit to be recorded in a particular quarter could be material.

For financial reporting purposes, income before income taxes for the years ended December 31 include the following components (in thousands):

 

     2011      2010      2009  

Domestic

   $ 13,406      $ 28,973      $ 5,236  

Foreign

     626        646        219  
  

 

 

    

 

 

    

 

 

 
   $ 14,032      $ 29,619      $ 5,455  
  

 

 

    

 

 

    

 

 

 

Significant components of the provision (benefit) for income taxes for the years ended December 31 are as follows (in thousands):

 

     2011      2010     2009  

Current:

       

Federal

   $ 3,624      $ 1,187     $ 939  

State

     496        958       422  

Foreign

     455        209       75  
  

 

 

    

 

 

   

 

 

 
     4,575        2,354       1,436  

Deferred:

       

Federal

     148        (6,274     (74
  

 

 

    

 

 

   

 

 

 
   $ 4,723      $ (3,920   $ 1,362  
  

 

 

    

 

 

   

 

 

 

 

67


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

The Company intends to continue to reinvest certain of its foreign earnings indefinitely. Accordingly, no U.S. income taxes have been provided for approximately $2,610,000 of unremitted earnings of international subsidiaries. As of December 31, 2011, the amount of unrecognized deferred tax liability on these earnings was $204,000.

The reconciliation of the federal statutory rate to the effective income tax rate for the years ended December 31 is as follows:

 

     2011     2010     2009  

Statutory federal tax rate

     35.0     34.0     35.0

State income taxes, net of federal income tax benefit

     3.4       2.7       9.2  

Increase (reduction) in tax reserves

     0.6       2.3       (2.1

Permanent items

     0.5       0.2       4.0  

Foreign rate differential and deferred items

     0.6       (1.0     (0.9

Tax credits

     (4.0            2.3  

U.S. manufacturing deduction

     (2.0     (0.9       

Book income attributable to noncontrolling interest

     (1.4     (0.3     (8.3

Decrease in valuation allowance

            (49.7     (14.2

Other

     1.0       (0.5       
  

 

 

   

 

 

   

 

 

 
     33.7     (13.2 %)      25.0
  

 

 

   

 

 

   

 

 

 

As a result of the difference in treatment of excess stock option deductions available for income tax return and financial statement reporting purposes, the Company has approximately $1,012,000 of federal research and development tax credit and $396,000 of federal alternative minimum tax credit carryforwards that may be offset against future taxable income, which are included in the components of deferred tax assets disclosed above. It is anticipated that when these tax attributes are realized on an income tax return in the future, the related benefit will be recorded against “Additional paid-in capital”. The research and development tax credit carryforwards expire beginning in 2016 for state purposes and in 2025 for federal purposes. The Company has net operating loss carryforwards in certain states, which began expiring in 2010.

A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

 

Balance on January 1, 2011

   $ 1,102  

Additions based on tax provisions related to the current year

     269  

Additions for tax positions of prior years

     34  
  

 

 

 

Balance on December 31, 2011

   $ 1,405  
  

 

 

 

The Company has reviewed the tax positions taken, or to be taken, in its tax returns for all tax years currently open to examination by a taxing authority. The total amount of unrecognized tax benefits, that is the aggregate tax effect of differences between tax return positions and the benefits recognized in the Company’s financial statements, on December 31, 2011 of $1,405,000 including accrued interest, if recognized, may decrease the Company’s income tax provision and effective tax rate. None of the unrecognized tax benefits as of December 31, 2011 are expected to significantly change during the next twelve months. The Company recognizes accrued interest and penalties, if any, related to unrecognized tax benefits as a component of income tax expense. As of December 31, 2011, the Company has accrued approximately $145,000 for the potential payment of interest and recorded approximately $68,000 of income tax expense for interest, net of related tax benefits, for the year ended December 31, 2011.

 

68


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

The Company files income tax returns in the United States and various foreign tax jurisdictions. These tax returns are generally open to examination by the relevant tax authorities from three to seven years from the date they are filed. The tax filings relating to the Company’s federal and state taxes are currently open to examination for tax years 2008 through 2010 and 2003 through 2010, respectively. In addition, the 2003, 2004 and 2007 tax years resulted in losses. These years may also be subject to examination since the losses were carried forward and utilized in future years. In January 2012, the Company received a notice from the State of New York that its New York corporate tax returns for the tax years 2008 through 2010 had been selected for audit. There are no other income tax audits currently in process.

15.  COMMITMENTS AND CONTINGENCIES

The Company leases certain of its office, warehousing and manufacturing space. The future minimum rental commitments under non-cancelable operating leases with remaining terms in excess of one year are as follows (in thousands):

 

Year

      

2012

   $ 1,156  

2013

     715  

2014

     463  

2015

     196  

2016 and thereafter

     22  

Rent expense was approximately $1,592,000, $1,492,000 and $1,496,000 in 2011, 2010 and 2009, respectively. The Company also pays executory costs such as taxes, maintenance and insurance.

The Company also has a contract with a third-party to supply nitrogen for its manufacturing and research and development activities. Under the contract, the Company is obligated to pay a minimum of $300,000 annually, subject to semi-annual price adjustments, through March 2015.

In addition, approximately $1,227,000 of unrecognized tax benefits has been recorded as liabilities as the settlement amounts are uncertain. The Company has recorded a liability related to these unrecognized tax benefits for potential interest and penalties of approximately $145,000 as of December 31, 2011.

As disclosed in prior filings, on January 28, 2011, SynQor, Inc. (“SynQor”) filed a complaint for patent infringement against Ericsson, Inc. (“Ericsson”), Cisco Systems, Inc. (“Cisco”) and the Company in U.S. District Court for the Eastern District of Texas (“the Texas Action”). This immediately followed a complaint filed by the Company on January 26, 2011, in U.S. District Court for the District of Massachusetts, in which the Company sought a declaratory judgment that its bus converter products do not infringe any valid claim of certain of SynQor’s U.S. patents, and that the claims of those patents are invalid. With respect to the Company, SynQor’s complaint alleges the Company’s products, including, but not limited to, unregulated bus converters used in intermediate bus architecture power supply systems, infringe certain SynQor patents. SynQor seeks, amongst other items, an injunction against further infringement and an award of unspecified compensatory and enhanced damages, interest, costs and attorney fees. On February 8, 2011, SynQor filed a motion for preliminary injunction seeking an order enjoining the Company from manufacturing, using, selling, and offering for sale in the United States and/or importing into the United States certain identified unregulated bus converters, as well as any other bus converters not significantly different from those products. On February 17, 2011, the Company withdrew its Massachusetts action without prejudice to allow the litigation to proceed in Texas. On May 16, 2011, SynQor announced it was withdrawing its motion for preliminary injunction against the Company. On September 20, 2011, SynQor filed an Amended Complaint in the Texas Action. The Amended Complaint repeated the

 

69


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

allegations of patent infringement against the Company contained in SynQor’s original complaint, and included additional patent infringement allegations with respect to U.S. Patent No. 8,023,290 (“ ‘290 patent”), which was issued on that day. As with SynQor’s original complaint, the amended complaint alleged that the Company’s products, including but not limited to the Company’s unregulated bus converters used in intermediate bus architecture power supply systems, infringed the asserted patents. On October 4, 2011, the Company filed an answer and counterclaims to SynQor’s amended complaint, in which Vicor alleges the ‘290 patent is unenforceable because it was procured through inequitable conduct before the U.S. Patent and Trademark Office and seeks damages against SynQor for SynQor’s unfair and deceptive trade practices and tortious interference with prospective economic advantage in connection with SynQor’s allegations of patent infringement against the Company. The Company does not believe that any of its products, including its unregulated bus converters, infringe any valid claim of the asserted SynQor patents, either alone or when used in an intermediate bus architecture implementation. The Company believes SynQor’s claims lack merit and, therefore, continues to vigorously defend itself against SynQor’s patent infringement allegations.

During the third quarter of 2009, the Company entered into a release and settlement agreement with a vendor over alleged product performance issues with certain products the vendor had sold to the Company. The Company received a payment of $750,000 in consideration for the settlement, which is recorded in “Gain from litigation-related and other settlements, net” in the accompanying Consolidated Statement of Operations.

On February 22, 2007, the Company announced it had reached an agreement in principle with Ericsson, Inc., the U.S. affiliate of LM Ericsson, to settle a lawsuit brought by Ericsson against the Company in California state court. Under the terms of the settlement agreement entered into on March 29, 2007, after a court ordered mediation, the Company paid $50,000,000 to Ericsson, of which $12,800,000 was reimbursed by the Company’s insurance carriers. Accordingly, the Company recorded a net loss of $37,200,000 from the litigation–related settlements in the fourth quarter of 2006. The Company has been seeking further reimbursement from its insurance carriers. On November 14, 2008, a jury in the United States District Court for the District of Massachusetts found in favor of the Company in a lawsuit against certain of its insurance carriers with respect to the Ericsson settlement. The jury awarded $17,300,000 in damages to the Company, although the verdict is subject to challenge in the trial court and on appeal. Both parties filed certain motions subsequent to the ruling and, on March 2, 2009, the judge in the case rendered his decision on the subsequent motions, reducing the jury award by $4,000,000. On March 26, 2009, the U.S. District Court, District of Massachusetts (“the Court”) issued its judgment in the matter, affirming the award of $13,300,000, plus prejudgment interest from the date of breach on March 29, 2007, through March 26, 2009, the date of judgment in the amount of approximately $3,179,000. The insurance carriers have filed their appeal to this total judgment in the amount of approximately $16,479,000. No final and collectible judgment yet has been entered by the Court to date as of December 31, 2011 and therefore no amounts are reflected in the accompanying consolidated financial statements.

The Company’s decision to enter into the settlement followed an adverse ruling by the court in January 2007 in connection with a settlement between Ericsson and co-defendants Exar Corporation (“Exar”) and Rohm Device USA, LLC (“Rohm”), two of the Company’s component suppliers prior to 2002. The Company’s writ of mandate appeal of this ruling was denied in April, 2007. In September 2007, The Company filed a notice of appeal of the court’s decision upholding the Ericsson-Exar-Rohm settlement. In December 2007, the court awarded Exar and Rohm amounts for certain statutory and discovery costs associated with this ruling. As such, the Company accrued $240,000 in the second quarter of 2007, included in “(Gain) loss from litigation-related and other settlements, net” in the Consolidated Statements of Operations, of which $78,000 of the award was paid in the second quarter of 2008. On February 9, 2009, the Court of Appeals issued its opinion affirming the judgment for Exar and Rohm in full. During the third quarter of 2009, the Company completed negotiations with Exar and Rohm, resulting in separate settlement agreements calling for a final payment to Exar of $70,000 and no additional payment due Rohm. As a result of the settlements, the Company reversed a remaining excess accrual of approximately $96,000 in the third quarter of 2009, which is recorded in “Gain from litigation-related and other settlements, net” in the accompanying Consolidated Statement of Operations.

 

70


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

In addition, the Company is involved in certain other litigation and claims incidental to the conduct of its business. While the outcome of lawsuits and claims against the Company cannot be predicted with certainty, management does not expect any current litigation or claims to have a material adverse impact on the Company’s financial position or results of operations.

16.  SEGMENT INFORMATION

The Company has organized its business segments according to its key product lines. The Brick Business Unit segment (“BBU”) designs, develops, manufactures and markets the Company’s modular power converters and configurable products, and also includes the operations of the Company’s Westcor division, the six entities comprising Vicor Custom Power, and the BBU operations of VJCL. The V*I Chip segment includes V*I Chip Corporation, which designs, develops, manufactures and markets the Company’s factorized power architecture (“FPA”) products. The V*I Chip segment also includes the V*I Chip business conducted through VJCL. Picor Corporation designs, develops, manufactures and markets integrated circuits and related products for use in a variety of power management and power system applications. Picor develops these products to be sold as part of Vicor’s products or to third parties for separate applications.

The Company’s chief operating decision maker evaluates performance and allocates resources based on segment revenues and segment operating income (loss). The operating income (loss) for each segment includes selling, general and administrative and research and development expenses directly attributable to the segment. Certain of the Company’s indirect overhead costs, which include corporate selling, general and administrative expenses, are allocated among the segments based upon an estimate of costs associated with each segment. Assets allocated to each segment are based upon specific identification of such assets, which include accounts receivable, inventories, fixed assets and certain other assets. The Corporate segment consists of those operations and assets shared by all segments. The costs of certain centralized executive and administrative functions are recorded in this segment, as are certain shared assets, most notably cash and cash equivalents, deferred tax assets, long-term investments, the Company’s facilities in Massachusetts, real estate and other assets. The Company’s accounting policies and method of presentation for segments are consistent with that used throughout the Consolidated Financial Statements.

 

71


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

The following table provides significant segment financial data as of and for the years ended December 31 (in thousands):

 

     BBU      V*I Chip     Picor     Corporate     Eliminations     Total  
     (1)      (1)                 (1)(2)        

2011:

             

Net revenues

   $ 194,830      $ 55,154     $ 13,183     $      $ (10,199   $ 252,968  

Income (loss) from operations

     31,938        (16,294     (1,239     (719            13,686  

Total assets

     82,096        30,701       7,098       119,231       (30,985     208,141  

Depreciation and amortization

     5,503        3,570       458       1,474              11,005  

2010:

             

Net revenues

   $ 217,018      $ 33,842     $ 11,061     $      $ (11,188   $ 250,733  

Income (loss) from operations

     55,619        (24,565     (1,282     (640     (10     29,122  

Total assets

     78,014        31,278       7,463       103,486       (15,329     204,912  

Depreciation and amortization

     4,788        3,500       470       1,464              10,222  

2009:

             

Net revenues

   $ 186,975        14,599     $ 6,143     $      $ (9,758   $ 197,959  

Income (loss) from operations

     29,173        (22,642     (4,265     (716     3,223       4,773  

Total assets

     204,611        19,124       9,352       98,209       (150,719     180,577  

Depreciation and amortization

     5,283        2,968       403       1,544              10,198  

 

(1) During the fourth quarter of 2010, the Company completed a recapitalization of V*I Chip. The impact of the recapitalization on V*I Chip was to eliminate its intercompany payable to BBU of approximately $172,100,000 and institute capital accounts totaling $50,000,000 as of December 31, 2010. The impact on segment reporting was to reduce Total assets for BBU and increase Eliminations by $172,100,000 as of December 31, 2010. There was no impact on the consolidated financial statements as a result of this recapitalization.

 

(2) The elimination for net revenues is principally related to inter-segment revenues of Picor to BBU and V*I Chip and for inter-segment revenues of V*I Chip to BBU. The elimination for total assets is principally related to inter-segment receivables due to BBU for the funding of V*I Chip operations and for the purchase of equipment for both V*I Chip and Picor.

During 2011, one customer accounted for approximately 14.9% of net revenues. The majority of this revenue was from the V*I Chip segment, with lesser amounts from BBU and Picor. During 2010, two customers accounted for approximately 12.3% and 11.5% of net revenues, respectively. During 2009, no customer accounted for more than 10% of net revenues. International sales, as a percentage of total net revenues, were approximately 57% in 2011 and 49% in 2010 and 41% in 2009, respectively. During 2011, net revenues from customers in Taiwan and Hong Kong, China accounted for approximately 15.3% and 11.8%, respectively, of total net revenues (11.8% and 11.4%, respectively, in 2010).

 

72


Table of Contents

VICOR CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

 

17.  QUARTERLY RESULTS OF OPERATIONS (Unaudited)

The following table sets forth certain unaudited quarterly financial data for the years ended December 31 (in thousands, except per share amounts):

 

     First      Second      Third      Fourth      Total  

2011:

              

Net revenues

   $ 70,455      $ 65,402      $ 58,560      $ 58,551      $ 252,968  

Gross margin

     30,454        27,309        24,440        24,491        106,694  

Consolidated net income

     4,169        3,204        1,175        761        9,309  

Net income attributable to noncontrolling interest

     151        138        93        84        466  

Net income attributable to Vicor Corporation

     4,018        3,066        1,082        677        8,843  

Net income per share attributable to Vicor Corporation:

              

Basic and diluted

     0.10        0.07        0.03        0.02        0.21  

 

     First      Second      Third      Fourth      Total  

2010:

              

Net revenues

   $ 51,709      $ 57,377      $ 68,672      $ 72,975      $ 250,733  

Gross margin

     23,324        25,739        32,473        32,984        114,520  

Consolidated net income

     2,005        4,747        15,869        10,918        33,539  

Net income attributable to noncontrolling interest

     53                50        111        214  

Net income attributable to Vicor Corporation

     1,952        4,747        15,819        10,807        33,325  

Net income per share attributable to Vicor Corporation:

              

Basic and diluted

     0.05        0.11        0.38        0.26        0.80  

In the fourth quarter of 2010, the Company recorded the following adjustments:

 

   

Recognition of deferred revenue of $4,729,000 and $4,524,000 in deferred costs in connection with the accounting for a multiple-element revenue arrangement.

 

73


Table of Contents
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

Attached as exhibits to this Form 10-K are certifications of our CEO and Chief Financial Officer (“CFO”), which are required in accordance with Rule 13a-14 of the Exchange Act of 1934, as amended (the “Exchange Act”). This “Controls and Procedures” section includes information concerning the controls and controls evaluation referred to in the certifications.

(a)  Evaluation of disclosure controls and procedures

As required by Rule 13a-15 under the Exchange Act, management, with the participation of our CEO and CFO, conducted an evaluation regarding the effectiveness of our disclosure controls and procedures, as of the end of the last fiscal year. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. We recognize that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and we necessarily apply our judgment in evaluating the cost-benefit relationship of possible controls and procedures. Based on the evaluation of the Company’s disclosure controls and procedures as of December 31, 2011, the Chief Executive Officer and Chief Financial Officer concluded that, as of such date, the Company’s disclosure controls and procedures were effective at the reasonable assurance level.

(b)  Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes those policies and procedures that (a) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets; (b) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures are being made only in accordance with authorizations of our management and Board of Directors; and (c) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on our financial statements.

Management assessed our internal control over financial reporting as of December 31, 2011, the end of our fiscal year. Management based its assessment on criteria established in “Internal Control — Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Management’s assessment included evaluation of such elements as the design and operating effectiveness of key financial reporting controls, process documentation, accounting policies, and our overall control environment.

Based on our assessment, management has concluded that our internal control over financial reporting was effective as of December 31, 2011.

The effectiveness of our internal control over financial reporting as of December 31, 2011 has been audited by Grant Thornton LLP, our independent registered public accounting firm, as stated in their report which is included immediately below.

 

74


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Shareholders of

Vicor Corporation:

We have audited Vicor Corporation (a Delaware Corporation) and its subsidiaries’ (collectively, the “Company”) internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by COSO.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Vicor Corporation and its subsidiaries as of December 31, 2011 and 2010, and the related consolidated statements of operations, equity and cash flows for each of the three years in the period ended December 31, 2011 and our report dated March 2, 2012 expressed an unqualified opinion.

/s/    Grant Thornton LLP

Boston, Massachusetts

March 2, 2012

 

75


Table of Contents

(c)  Inherent Limitations on Effectiveness of Controls

The Company’s management, including the CEO and CFO, does not expect that our disclosure controls or our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. The design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of any evaluation of controls effectiveness to future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.

(d)  Changes in Internal Control Over Financial Reporting

There was no change in our internal control over financial reporting that occurred during the fiscal quarter ended December 31, 2011, that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

76


Table of Contents

ITEM 9B. OTHER INFORMATION

None.

PART III

 

ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT

Incorporated by reference from the Company’s Definitive Proxy Statement for its 2012 annual meeting of stockholders.

 

ITEM 11. EXECUTIVE COMPENSATION

Incorporated by reference from the Company’s Definitive Proxy Statement for its 2012 annual meeting of stockholders.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Incorporated by reference from the Company’s Definitive Proxy Statement for its 2012 annual meeting of stockholders.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE

Incorporated by reference from the Company’s Definitive Proxy Statement for its 2012 annual meeting of stockholders.

 

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

Incorporated by reference from the Company’s Definitive Proxy Statement for its 2012 annual meeting of stockholders.

PART IV

 

ITEM 15. EXHIBITS AND FINANCIAL STATEMENTS

(a) (1) Financial Statements

See index in Item 8.

(a) (2) Schedules

Schedule II Valuation and Qualifying Accounts

All other schedules for which provision is made in the applicable accounting regulation of the Securities and Exchange Commission are not required under the related instructions or are inapplicable, and therefore have been omitted.

 

77


Table of Contents

(b) Exhibits

 

Exhibits

  

Description of Document

    3.1

      Restated Certificate of Incorporation, dated February 28, 1990 (1)

    3.2

      Certificate of Ownership and Merger Merging Westcor Corporation, a Delaware Corporation, into Vicor Corporation, a Delaware Corporation, dated December 3, 1990 (1)

    3.3

      Certificate of Amendment of Restated Certificate of Incorporation, dated May 10, 1991 (1)

    3.4

      Certificate of Amendment of Restated Certificate of Incorporation, dated June 23, 1992 (1)

    3.5

      Bylaws, as amended (9)

    4.1

      Specimen Common Stock Certificate (2)

  10.1  

      1984 Stock Option Plan of the Company, as amended (2)

  10.2  

      1993 Stock Option Plan (3)

  10.3  

      1998 Stock Option and Incentive Plan (4)

  10.4  

      Amended and Restated 2000 Stock Option and Incentive Plan (5)

  10.5  

      Form of Non-Qualified Stock Option under the Vicor Corporation Amended and Restated 2000 Stock Option and Incentive Plan (6)

  10.6  

      Sales Incentive Plan (7)

  10.7  

      Picor Corporation 2001 Stock Option and Incentive Plan (8)

  10.8  

      Form of Non-Qualified Stock Option under the Picor Corporation 2001 Stock Option and Incentive Plan (8)

  10.9  

      V*I Chip Corporation Amended 2007 Stock Option and Incentive Plan (11)

  10.10    

      Form of Non-Qualified Stock Option Agreement under the V*I Chip Corporation Amended 2007 Stock Option and Incentive Plan (10)

  10.11    

      Form of Incentive Stock Option Agreement under the V*I Chip Corporation Amended 2007 Stock Option and Incentive Plan (11)

  10.12    

      Form of Stock Restriction Agreement under the V*I Chip Corporation Amended 2007 Stock Option and Incentive Plan (11)

  21.1  

      Subsidiaries of the Company (12)

  23.1  

      Consent of Grant Thornton LLP (12)

  31.1  

      Certification of Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934 (12)

  31.2  

      Certification of Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934 (12)

  32.1  

      Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (12)

  32.2  

      Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (12)

   101

      The following material from the Company’s Annual Report on Form 10-K, for the year ended December 31, 2011, formatted in XBRL (Extensible Business Reporting Language): (i) the Consolidated Balance Sheets; (ii) the Consolidated Statements of Operations; (iii) the Consolidated Statements of Cash Flows; (iv) the Consolidate Statements of Equity; and (v) the Notes to Consolidated Financial Statements.

 

(1) Filed as an exhibit to the Company’s Annual Report on Form 10-K filed on March 29, 2001 and incorporated herein by reference.
(2) Filed as an exhibit to the Company’s Registration Statement on Form 10, as amended, under the Securities Exchange Act of 1934 (File No. 0-18277), and incorporated herein by reference.
(3) Filed as an exhibit to the Company’s Registration Statement on Form S-8, as amended, under the Securities Act of 1933 (No. 33-65154), and incorporated herein by reference.
(4) Filed as an exhibit to the Company’s Registration Statement on Form S-8, as amended, under the Securities Act of 1933 (No. 333-61177), and incorporated herein by reference.

 

78


Table of Contents
  (5) Filed as an exhibit to the Company’s Proxy Statement for use in connection with its 2002 Annual Meeting of Stockholders, which was filed on April 29, 2002, and incorporated herein by reference.
  (6) Filed as an exhibit to the Company’s Quarterly Report on Form 10-Q filed on November 4, 2004 and incorporated herein by reference.
  (7) Filed as an exhibit to the Company’s Annual Report on Form 10-K filed on March 16, 2005 and incorporated herein by reference.
  (8) Filed as an exhibit to the Company’s Annual Report on Form 10-K filed on March 14, 2006 and incorporated herein by reference.
  (9) Filed as an exhibit to the Company’s Quarterly Report on Form 10-Q filed on November 8, 2006 and incorporated herein by reference.
(10) Filed as an exhibit to the Company’s Current Report on Form 8-K, dated June 6, 2007 and incorporated herein by reference.
(11) Filed as an exhibit to the Company’s Current Report and Form 8-K, dated March 6, 2008 incorporated herein by reference.
(12) Filed herewith.

 

79


Table of Contents
Schedule

VICOR CORPORATION

SCHEDULE II

VALUATION AND QUALIFYING ACCOUNTS

VALUATION AND QUALIFYING ACCOUNTS

Years ended December 31, 2011, 2010 and 2009

 

Description

   Balance at
Beginning of Period
     (Credit) Charge
to Costs and
Expenses
     Other Charges,
Deductions (1)
    Balance at
End of Period
 

Allowance for doubtful accounts:

          

Year ended:

          

December 31, 2011

   $ 309,000      $ 18,000      $ (61,000   $ 266,000  

December 31, 2010

     260,000        57,000        (8,000     309,000  

December 31, 2009

     300,000        3,000        (43,000     260,000  

 

(1) Reflects uncollectible accounts written off, net of recoveries.

 

Description

   Balance at
Beginning of Period
     (Credit) Charge
to Costs and
Expenses
     Other Charges,
Deductions (2)
    Balance at
End of Period
 

Inventory Reserves:

          

Year ended:

          

December 31, 2011

   $ 5,444,000      $ 1,650,000      $ (727,000   $ 6,367,000  

December 31, 2010

     5,943,000        1,721,000        (2,220,000     5,444,000  

December 31, 2009

     6,358,000        1,010,000        (1,425,000     5,943,000  

 

(2) Reflects amounts associated with inventory that have been discarded or sold.

 

80


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

Vicor Corporation
By:   /s/    James A. Simms        
  James A. Simms
  Vice President, Chief Financial Officer

Date: March 2, 2012

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/s/    Patrizio Vinciarelli        

Patrizio Vinciarelli

  

President, Chief Executive Officer and

Chairman of the Board (Principal

Executive Officer)

  March 2, 2012

/s/    James A. Simms        

James A. Simms

  

Chief Financial Officer Vice President

(Principal Financial Officer and Principal

Accounting Officer)

  March 2, 2012

/s/    Estia J. Eichten        

Estia J. Eichten

   Director   March 2, 2012

/s/    David T. Riddiford      

David T. Riddiford

   Director   March 2, 2012

/s/    Barry Kelleher        

Barry Kelleher

   Director   March 2, 2012

/s/    Samuel J. Anderson        

Samuel J. Anderson

   Director   March 2, 2012

/s/    Claudio Tuozzolo        

Claudio Tuozzolo

   Director   March 2, 2012

/s/    Jason L. Carlson        

Jason L. Carlson

   Director   March 2, 2012

/s/   Liam K. Griffin        

Liam K. Griffin

   Director   March 2, 2012

 

81