VICOR CORP - Quarter Report: 2023 March (Form 10-Q)

VICOR CORPORATION

INDEX

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

Item 2 — Management’s Discussion and Analysis of Financial Condition and Results of Operations

Cautionary Note Regarding Forward-Looking Statements

The Company’s consolidated operating results are affected by a wide variety of factors that could materially and adversely affect revenues and profitability, including the risk factors described in the Company’s Annual Report on Form 10-K for the year ended December 31, 2022 and the risk factors described in this Quarterly Report on Form 10-Q. As a result of these and other factors, the Company may experience material fluctuations in future operating results on a quarterly or annual basis, which could materially and adversely affect its business, consolidated financial condition, and operating results, and the share price of its Common Stock. This document and other documents filed by the Company with the Securities and Exchange Commission (“SEC”) include forward-looking statements regarding future events and the Company’s future results that are subject to the safe harbor afforded under the Private Securities Litigation Reform Act of 1995 and other safe harbors afforded under the Securities Act of 1933 and the Securities Exchange Act of 1934. All statements other than statements of historical fact are statements that could be deemed forward-looking statements. Forward-looking statements are based on our current beliefs, expectations, estimates, forecasts, and projections for the future performance of the Company and are subject to risks and uncertainties. Forward-looking statements are identified by the use of words denoting uncertain, future events, such as “anticipate,” “assume,” “believe,” “continue,” “could,” “estimate,” “expect,” “future,” “goal,” “if,” “intend,” “may,” “plan,” “potential,” “project,” “prospective,” “seek,” “should,” “target,” “will,” or “would,” as well as similar words and phrases, including the negatives of these terms, or other variations thereof. Forward-looking statements also include, but are not limited to, statements regarding: our expectations that the Company has adequate resources to respond to financial and operational risks associated with the novel coronavirus (“COVID-19”) and regarding our and our customers’ ability to effectively conduct business during the pandemic; our ability to address certain supply chain risks; our ongoing development of power conversion architectures, switching topologies, materials, packaging, and products; the ongoing transition of our business strategically, organizationally, and operationally from serving a large number of relatively low-volume customers across diversified markets and geographies to serving a small number of relatively large volume customers; our intent to enter new market segments; the levels of customer orders overall and, in particular, from large customers and the delivery lead times associated therewith; anticipated new and existing customer wins; the financial and operational impact of customer changes to shipping schedules; the derivation of a portion of our sales in each quarter from orders booked in the same quarter; our intent to expand the percentage of revenue associated with licensing our intellectual property to third parties; our plans to invest in expanded manufacturing capacity, including the expansion of our Andover facility and the introduction of new manufacturing processes, and the timing, location, and funding thereof; our belief that cash generated from operations together with our available cash and cash equivalents will be sufficient to fund planned operational needs, capital equipment purchases, and planned construction, for the foreseeable future; our outlook regarding tariffs and the impact thereof on our business; our belief that we have limited exposure to currency risks; our intentions regarding the declaration and payment of cash dividends; our intentions regarding protecting our rights under our patents; and our expectation that no current litigation or claims will have a material adverse impact on our financial position or results of operations. These forward-looking statements are based upon our current expectations and estimates associated with prospective events and circumstances that may or may not be within our control and as to which there can be no assurance. Actual results could differ materially from those implied by forward-looking statements as a result of various factors, including but not limited to those described above, as well as those described in the Company’s Annual Report on Form 10-K for the year ended December 31, 2022 under Part I, Item 1 — “Business,” under Part I, Item 1A — “Risk Factors,” under Part I, Item 3 — “Legal Proceedings,” and under Part II, Item 7 — “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and those described in this Quarterly Report on Form 10-Q, particularly under Part I, Item 2 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and under Part II, Item 1A – “Risk Factors.” The discussion of our business contained herein, including the identification and assessment of factors that may influence actual results, may not be exhaustive. Therefore, the information presented should be read together with other documents we file with the SEC from time to time, including our Annual Reports on Form 10-K, our Quarterly Reports on Form 10-Q and our Current Reports on Form 8-K, which may supplement, modify, supersede, or update the factors discussed in this Quarterly Report on Form 10-Q. Any forward-looking statement made in this Quarterly Report on Form 10-Q is based on information currently available to us and speaks only as of the date on which it is made. We do not undertake any obligation to update any forward-looking statements as a result of future events or developments, except as required by law.

-16-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

Overview

We design, develop, manufacture, and market modular power components and power systems for converting electrical power for use in electrically-powered devices. Our competitive position is supported by innovations in product design and achievements in product performance, largely enabled by our focus on the research and development of advanced technologies and processes, often implemented in proprietary semiconductor circuitry, materials, and packaging. Many of our products incorporate patented or proprietary implementations of high-frequency switching topologies enabling power system solutions that are more efficient and much smaller than conventional alternatives. Our strategy emphasizes demonstrable product differentiation and a value proposition based on competitively superior solution performance, advantageous design flexibility, and a compelling total cost of ownership. While we offer a wide range of alternating current (“AC”) and direct current (“DC”) power conversion products, we consider our core competencies to be associated with 48V DC distribution, which offers numerous inherent cost and performance advantages over lower distribution voltages. However, we also offer products addressing other DC voltage standards (e.g., 380V for power distribution in data centers, 110V for rail applications, 28V for military and avionics applications, and 24V for industrial automation).

Based on design, performance, and form factor considerations, as well as the range of evolving applications for which our products are appropriate, we categorize our product portfolios as either “Advanced Products” or “Brick Products.” The Advanced Products category consists of our more recently introduced products, which are largely used to implement our proprietary Factorized Power Architecture^™ (“FPA”), an innovative power distribution architecture enabling flexible, rapid power system design using individual components optimized to perform a specific conversion function.

The Brick Products category largely consists of our broad and well-established families of integrated power converters, incorporating multiple conversion stages, used in conventional power systems architectures. Given the growth profiles of the markets we serve with our Advanced Products line and our Brick Products line, our strategy involves a transition in organizational focus, emphasizing investment in our Advanced Products line and targeting high growth market segments with a low-mix, high-volume operational model, while maintaining a profitable business in the mature market segments we serve with our Brick Products line with a high-mix, low-volume operational model.

The applications in which our Advanced Products and Brick Products are used are typically in the higher-performance, higher-power segments of the market segments we serve. With our Advanced Products, we generally serve large Original Equipment Manufacturers (“OEMs”), Original Design Manufacturers (“ODMs”), and their contract manufacturers, with sales currently concentrated in the data center and hyperscaler segments of enterprise computing, in which our products are used for voltage distribution on server motherboards, in server racks, and across datacenter infrastructure. We have established a leadership position in the emerging market segment for powering high-performance processors used for acceleration of applications associated with artificial intelligence (“AI”). Our customers in the AI market segment include the leading innovators in processor and accelerator design, as well as early adopters in cloud computing and high performance computing. We also target applications in aerospace and aviation, defense electronics, industrial automation, instrumentation, test equipment, solid state lighting, telecommunications and networking infrastructure, and vehicles (notably in the autonomous driving, electric vehicle, and hybrid vehicle niches of the vehicle segment). With our Brick Products, we generally serve a fragmented base of large and small customers, concentrated in aerospace and defense electronics, industrial automation, industrial equipment, instrumentation and test equipment, and transportation (notably in rail and heavy equipment applications). With our strategic emphasis on larger, high-volume customers, we expect to experience over time a greater concentration of sales among relatively fewer customers.

Our quarterly consolidated operating results can be difficult to forecast and have been subject to significant fluctuations. We plan our production and inventory levels based on management’s estimates of customer demand, customer forecasts, and other information sources. Customer forecasts, particularly those of OEM, ODM, and contract manufacturing customers to which we supply Advanced Products in high volumes, are subject to scheduling changes on short notice, contributing to operating inefficiencies and excess costs. In addition, external factors such as supply chain uncertainties, which are often associated with the cyclicality of the electronics industry, regional macroeconomic and trade-related circumstances, and force majeure events (most recently evidenced by the COVID-19 pandemic), have caused our operating results to vary meaningfully. Supply chain disruptions, including those associated with our reliance on outsourced package process steps that are essential in the production of some of our Advanced Products, and those relating, for example, to the procurement of raw material, have in the past negatively impacted and may in the

-17-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

future negatively impact our operating results. We have taken steps to mitigate the impact of supply chain disruptions by, among other things and in varying degrees, moving outsourced manufacturing steps in-house to the Company, ordering supplies with extended lead times, paying higher prices for certain supplies or outsourced production, and expediting deliveries at a cost premium. The resulting impact of the steps taken to mitigate supply chain disruptions have, to varying degrees and at different times, reduced our revenue, gross margin, operating profit and cash flow and may continue to do so in the future. While we continue to make progress in moving outsourced manufacturing steps in-house to the Company, we are still experiencing long lead times on certain raw material components, and uncertainty of output from our outsourced manufacturing supplier. Our quarterly gross margin as a percentage of net revenues may vary, depending on production volumes, average selling prices, average unit costs, the mix of products sold during that quarter, and the level of importation of raw materials subject to tariffs. Our quarterly operating margin as a percentage of net revenues also may vary with changes in revenue and product level profitability, but our operating costs are largely associated with compensation and related employee costs, which are not subject to sudden or significant changes.

Ongoing / Potential Impacts of the COVID-19 Pandemic on the Company

As of the date of this report, the number of Company employees diagnosed with COVID-19 and the corresponding absenteeism due to COVID-19 are negligible. While the productivity of our factory is not currently impacted by COVID-19, productivity may be reduced if quarantine rates increase or if the number of employees diagnosed with COVID-19 requires further implementation of restrictive health and safety measures, including factory closure. We continue to operate with three shifts in our factory, and, with few exceptions, our engineering, sales, and administrative personnel are working from the Company’s offices.

We are closely monitoring the operating performance and financial health of our customers, business partners, and suppliers, but an extended period of operational constraints brought about by the pandemic could cause financial hardship within our customer base and supply chain. Such hardship may continue to disrupt customer demand and limit our customers’ ability to meet their obligations to us. Similarly, such hardship within our supply chain could continue to restrict our access to raw materials or services. Additionally, restrictions or disruptions of transportation, such as reduced availability of cargo transport by ship or air, have resulted and may continue to result in higher costs and inbound and outbound delays.

Although there is uncertainty regarding the extent to which the pandemic will continue to impact our operational and financial results in the future, the Company’s high level of liquidity, flexible operational model, existing raw material inventories, and increased use of second sources for critical manufacturing inputs together support management’s belief the Company will be able to effectively conduct business until the pandemic passes.

We are monitoring the rapidly changing circumstances, and may take additional actions to address COVID-19 risks as they evolve. Because much of the potential negative impact of the pandemic is associated with risks outside of our control, we cannot estimate the extent of such impact on our financial or operational performance, or when such impact might occur.

Summary of First Quarter 2023 Financial Performance Compared to Fourth Quarter 2022 Financial Performance

The following summarizes our financial performance for the first quarter of 2023, compared to the fourth quarter of 2022:

-18-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

Three Months Ended March 31, 2023 Compared to Three Months Ended March 31, 2022

Net revenues for the first quarter of 2023 were $97,816,000, an increase of $9,534,000, or 10.8%, as compared to $88,282,000 for the first quarter of 2022. Net revenues, by product line, for the three months ended March 31, 2023 and 2022 were as follows (dollars in thousands):

The decrease in net revenues for Advanced Products was primarily due to manufacturing constraints and schedule delays. The increase in net revenues for Brick Products was primarily due to the ability to shift manufacturing resources to focus on available backlog, as well as favorable market conditions.

Gross margin for the first quarter of 2023 increased $8,933,000, or 23.8%, to $46,534,000, from $37,601,000 for the first quarter of 2022. Gross margin, as a percentage of net revenues, increased to 47.6% for the first quarter of 2023, compared to 42.6% for the first quarter of 2022. The increase in gross margin dollars and gross margin percentage was primarily due to favorable higher sales volume, improved production efficiencies, and reduced freight-in and tariff spending of $3,791,000 (net of approximately $3,000,000 in duty drawback recovery of previously paid tariffs), partially offset by an unfavorable sales mix.

-19-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

Selling, general, and administrative expenses were $20,223,000 for the first quarter of 2023, an increase of $1,655,000, or 8.9%, from $18,568,000 for the first quarter of 2022. Selling, general, and administrative expenses as a percentage of net revenues decreased to 20.7% for the first quarter of 2023 from 21.0% for the first quarter of 2022. The components of the $1,655,000 increase in selling, general and administrative expenses for the first quarter of 2023 from the first quarter of 2022 were as follows (dollars in thousands):

-20-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

Research and development expenses were $15,869,000 for the first quarter of 2023, an increase of $1,616,000, or 11.3%, compared to $14,253,000 for the first quarter of 2022. As a percentage of net revenues, research and development expenses increased to 16.2% for the first quarter of 2023 from 16.1% for the first quarter of 2022. The components of the $1,616,000 increase in research and development expenses were as follows (dollars in thousands):

The significant components of “Other income (expense), net” for the three months ended March 31, and the changes between the periods were as follows (in thousands):

Our exposure to market risk fluctuations in foreign currency exchange rates relates to the operations of Vicor Japan Company, Ltd. (“VJCL”), for which the functional currency is the Japanese Yen, and all other subsidiaries in Europe and Asia, for which the functional currency is the U.S. Dollar. These subsidiaries in Europe and Asia experienced more favorable foreign currency exchange rate fluctuations in the first quarter of 2023 compared to the first quarter of 2022.

Income before income taxes was $12,392,000 for the first quarter of 2023, as compared to $4,942,000 for the first quarter of 2022.

-21-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

The provision (benefit) for income taxes and the effective income tax rates for the three months ended March 31, 2023 and 2022 were as follows (dollars in thousands):

The effective tax rates were lower than the statutory tax rates for the three months ended March 31, 2023 and 2022 primarily due to the Company’s full valuation allowance position against domestic deferred tax assets. The provision (benefit) for income taxes for the three months ended March 31, 2023 and 2022 included estimated federal, state and foreign income taxes in jurisdictions in which the Company does not have sufficient tax attributes.

See Note 8 to the Condensed Consolidated Financial Statements for disclosure regarding our current assessment of the valuation allowance against all domestic deferred tax assets, and the possible release (i.e., reduction) of the allowance in the future.

We reported net income for the first quarter of 2023 of $11,244,000, or $0.25 per diluted share, compared to $4,999,000, or $0.11 per diluted share, for the first quarter of 2022.

Liquidity and Capital Resources

As of March 31, 2023, we had $192,897,000 in cash and cash equivalents. The ratio of total current assets to total current liabilities was 6.8:1 as of March 31, 2023 and 5.6:1 as of December 31, 2022. Working capital, defined as total current assets less total current liabilities, increased $14,643,000 to $312,698,000 as of March 31, 2023 from $298,055,000 as of December 31, 2022.

The changes in working capital from December 31, 2022 to March 31, 2023 were as follows (in thousands):

The primary sources of cash for the three months ended March 31, 2023 were $10,113,000 generated from operations, and $2,261,000 received in connection with the exercise of options to purchase our Common Stock awarded under our stock option plans and the issuance of Common Stock under our 2017 Employee Stock Purchase Plan. The primary uses of cash during the three months ended March 31, 2023 were for the purchase of property and equipment of $10,089,000.

In November 2000, our Board of Directors authorized the repurchase of up to $30,000,000 of our Common Stock (the “November 2000 Plan”). The November 2000 Plan authorizes us to make such repurchases from time to time in the open market or through privately negotiated transactions. The timing and amounts of Common Stock repurchases are at the discretion of management based

-22-

VICOR CORPORATION

Management’s Discussion and Analysis of

Financial Condition and Results of Operation

March 31, 2023

on its view of economic and financial market conditions. We did not repurchase shares of Common Stock under the November 2000 Plan during the three months ended March 31, 2023. As of March 31, 2023, we had approximately $8,541,000 remaining available for repurchases of our Common Stock under the November 2000 Plan.

As of March 31, 2023, we had a total of approximately $19,325,000 of cancelable and non-cancelable capital expenditure commitments, principally for manufacturing and production equipment, which we intend to fund with existing cash, and approximately $2,083,000 of capital expenditure items which had been received and included in Property, plant and equipment in the accompanying Condensed Consolidated Balance Sheets, but not yet paid for. Our primary needs for liquidity are for making continuing investments in manufacturing and production equipment and for funding the construction of the additional manufacturing space adjoining our existing Andover manufacturing facility, including architectural and construction costs. We believe cash generated from operations together with our available cash and cash equivalents will be sufficient to fund planned operational needs, capital equipment purchases, and the planned construction, for both the short and long term.

We do not consider the impact of inflation or fluctuations in the exchange rates for foreign currency transactions to have been significant during the last three fiscal years.

Critical Accounting Policies and Estimates

There have been no material changes in our judgments and assumptions associated with the development of our critical accounting estimates during the period ended March 31, 2023. Refer to the section entitled “Critical Accounting Policies and Estimates” in Part II, Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of the Company’s Annual Report on Form 10-K for the year ended December 31, 2022.

-23-

Vicor Corporation

March 31, 2023

Item 3 — Quantitative and Qualitative Disclosures About Market Risk

We are exposed to a variety of market risks, including changes in interest rates affecting the return on our cash and cash equivalents, our short-term investments and fluctuations in foreign currency exchange rates. As our cash and cash equivalents and short-term investments consist principally of cash accounts, money market securities, and U.S. Treasury securities, which are short-term in nature, we believe our exposure to market risk on interest rate fluctuations for these investments is not significant. As of March 31, 2023, our long-term investment portfolio, recorded on our Condensed Consolidated Balance Sheet as “Long-term investment, net”, consisted of a single auction rate security with a par value of $3,000,000, purchased through and held in custody by a broker-dealer affiliate of Bank of America, N.A., that has experienced failed auctions (the “Failed Auction Security”) since February 2008. While the Failed Auction Security is Aaa/AA+ rated by major credit rating agencies, collateralized by student loans and guaranteed by the U.S. Department of Education under the Federal Family Education Loan Program, continued failure to sell at its periodic auction dates (i.e., reset dates) could negatively impact the carrying value of the investment, in turn leading to impairment charges in future periods. Periodic changes in the fair value of the Failed Auction Security attributable to credit loss (i.e., risk of the issuer’s default) are recorded through earnings as a component of “Other income (expense), net”, with the remainder of any periodic change in fair value not related to credit loss (i.e., temporary “mark-to-market” carrying value adjustments) recorded in “Accumulated other comprehensive loss”, a component of Stockholders’ Equity. Should we conclude a decline in the fair value of the Failed Auction Security is other than temporary, such losses would be recorded through earnings as a component of “Other income (expense), net”. We do not believe there was an “other-than-temporary” decline in value in this security as of March 31, 2023.

Our exposure to market risk for fluctuations in foreign currency exchange rates relates to the operations of VJCL, for which the functional currency is the Japanese Yen, and changes in the relative value of the Yen to the U.S. Dollar. The functional currency of all other subsidiaries in Europe and other subsidiaries in Asia is the U.S. Dollar. While we believe the risk of fluctuations in foreign currency exchange rates for these subsidiaries is generally not significant, they can be subject to substantial currency changes, and therefore foreign exchange exposures.

Item 4 — Controls and Procedures

As required by Rule 13a-15 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), management, with the participation of our Chief Executive Officer (“CEO”) (who is our principal executive officer) and Chief Financial Officer (“CFO”) (who is our principal financial officer), conducted an evaluation of the effectiveness of our disclosure controls and procedures as of the end of the last fiscal quarter (i.e., March 31, 2023). The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the Securities and Exchange Commission’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure information required to be disclosed by a company in the reports it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Based on the evaluation of our disclosure controls and procedures as of March 31, 2023, our CEO and CFO concluded, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.

A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Accordingly, management, including the CEO and CFO, recognizes our disclosure controls or our internal control over financial reporting may not prevent or detect all errors and all fraud. The design of a control system must reflect the fact there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the

-24-

Vicor Corporation

March 31, 2023

likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of any control’s effectiveness to future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.

There was no change in our internal control over financial reporting that occurred during the fiscal quarter ended March 31, 2023, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

-25-

Vicor Corporation

Part II – Other Information

March 31, 2023

Item 1 — Legal Proceedings

See Note 10. Commitments and Contingencies in the Notes to Condensed Consolidated Financial Statements in Part I, Item 1 – “Financial Statements.”

Item 1A — Risk Factors

There have been no material changes in the risk factors described in Part I, Item 1A – “Risk Factors” of the Company’s Annual Report on Form10-K for the year ended December 31, 2022.

Item 6 — Exhibits

-26-

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

-27-