Vystar Corp - Annual Report: 2016 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

 WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

For the Fiscal Year Ended December 31, 2016

OR

Commission File No. 000-53754

VYSTAR CORPORATION

(Exact name of registrant as specified in its charter)

Registrants telephone number, including area code: 866-674-5238

Securities registered pursuant to Section 12(b) of the Act:

NONE

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, par value $0.0001 per share

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☑

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☐ No ☑

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☐ No ☑

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrants knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer”, and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☑

As of April 13, 2017, the aggregate market value of shares held by non-affiliates of the registrant (based upon the closing sale price of such shares on the OTC Market on April 12, 2017) was $19,240,909. See Item 12.

As of April 13, 2017, there were 120,255,681 shares of the registrant’s common stock outstanding and 13,828 shares of the registrants Series A preferred stock.

Vystar Corporation

Annual Report on Form 10-K

 For the Year Ended December 31, 2016

Table of Contents

CAUTIONARY NOTE REGARDING FORWARD LOOKING STATEMENTS

Certain oral and written statements made by Vystar Corporation about future events and expectations, including statements in this Annual Report on Form 10-K (the “Report”) contain forward-looking statements, within the meaning of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) and the Securities Act of 1933, as amended ( the “Securities Act”), that involve risks and uncertainties. For those statements, we claim the protection of the safe-harbor for forward-looking statements contained in the Private Securities Litigation Act of 1995. In some cases, forward-looking statements are identified by words such as “believe,” “anticipate,” “expect,” “intend,” “plan,” “will,” “may” and similar expressions. You should not place undue reliance on these forward-looking statements, which speak only as of the date of this Report or the statement. All of these forward-looking statements are based on information available to us at this time, and we assume no obligation to update any of these statements. Actual results could differ from those projected in these forward-looking statements as a result of many factors, including those identified in “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and elsewhere. We urge you to review and consider the various disclosures made by us in this Report, and those detailed from time to time in our filings with the Securities and Exchange Commission (the “SEC”), that attempt to advise you of the risks and factors that may affect our future results. We qualify any forward-looking statements entirely by these cautionary factors.

The above mentioned risk factors are not all-inclusive. Given these uncertainties and that such statements, speak only as of the date made; you should not place undue reliance on forward-looking statements. We undertake no obligation to update publicly or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

PART I

Products and Services

Natural Rubber Latex

Vystar Corporation (“Vystar”, the “Company”, “we”, “us”, or “our”) is the creator and exclusive owner of the innovative technology to produce Vytex® Natural Rubber Latex (“NRL”). The Vytex Division contains our global multi-patented technology that reduces antigenic and total protein in natural rubber latex products to virtually undetectable levels. Vytex NRL, our “ultra-low protein” natural rubber latex has been introduced throughout the worldwide marketplace that uses NRL or latex substitutes as a raw material for end products. Natural rubber latex or latex substitutes are used in an extensive range of products including balloons, textiles, footwear and clothing (threads), adhesives, foams (mattresses, pillows, mattress toppers, etc.), furniture (foam and adhesives), carpet, paints, coatings, protective equipment, sporting equipment, and, especially health care products such as condoms, surgical and exam gloves, among others. Our challenge has been that a manufacturer’s conversion from the use of standard latex or synthetic raw material to Vytex NRL involves a protracted sales cycle ranging from eighteen to thirty six months. Additionally, in the past, our primary method of distribution was via toll manufacturing. We now have several licensing agreements in place for global distribution that have allowed us to focus on and transition to sales and marketing with a technical oversight.

Natural rubber latex is an agricultural product produced from the sap of the rubber tree, Hevea brasiliensis. According to the most recent data available and obtained on the International Rubber Study Group web site (www.rubberstudy.com) and dated January 6, 2015: the total world rubber demand is forecast to increase at 1.8% and 4.1% in 2015 and 2016 respectively, growing below the long-term growth rate of 3.7% under the IMF Scenario to 29.1 million tonnes in 2015 and to 30.3 million tonnes in 2016.

World Natural Rubber (NR) demand is forecasted to increase by 3.1% in 2015 under the IMF Scenario and by 4.4% in 2016. The world total NR consumption is expected to be 12.3 million tonnes in 2015, 12.9 million tonnes in 2016 and increasing to 16.5 million tonnes in 2023. World Synthetic Rubber (SR) demand is expected to increase to 16.8 million tonnes in 2015 and rise to 17.5 million tonnes in 2016 under the IMF Scenario. In 2023, the demand for SR will be 21.5 million tonnes. The outlook for NR supply is positive, sufficient to meet the demand of the industry for all forecast years under all three scenarios. Almost 60% of global consumption is by the world’s tyre manufacturing industry, with the remainder going into the ‘general rubber products’ sector; many thousands of different goods are manufactured by this sector, serving many industries, including transport, construction, health, mining, apparel, foam, etc.

Substantially all of the latex processors are located in Southeast Asia, India, Africa and Latin America and are owned by local groups or large multinational corporations. This future demand is awakening interest in other areas of the world where the climate is suitable, particularly in Guatemala, where focus now shifts to certifications from the Forestry Stewardship Council and Rainforest Alliance, as a specialty latex... In addition to the resurgence of Central and South America in natural rubber latex production, countries such as Vietnam and Cambodia have launched major efforts to meet the needs of the global liquid natural rubber latex market. Vietnam is now a major processor of our Vytex NRL and several trial runs of the specialty offerings discussed below that are in place for manufacturer trials and we now have two producers in Guatemala, one in the trial phase.

Our initial product portfolio included Vytex NRL in high ammonia (HA) and low ammonia (LA) formulations. New specialized formulations are projected to come to market over the next year with trials in ultra-low ammonia, pre-vulcanised and low nitrosamine versions currently taking place. Vystar has used its technology to work with customers to solve production issues and provide them with a point of difference and guidance as research using Vytex has headed into directions previously thought to be off-limits to natural rubber latex. It appears to be the removal of the vast majority of the proteins, the carotenoids and the non-rubbers that affords Vytex NRL this opportunity.

Board of Directors Member and Research & Development Director Ranjit K. Matthan, Ph.D., revealed ongoing developments in the formulation of Vytex NRL with reduced or no ammonia and nitrosamines at the International Latex Conference (ILC) session titled “Advances in Environmentally Friendly Ultra Low Protein Natural Rubber Specialty Latices” on August 12, 2015. The significant advances in aluminum hydroxide-treated Vytex NRL properties and applications are potential game-changers for the issues of volatile organic content and nitrosamines for some critical latex products, such as balloons, catheters, condoms, and other medical devices, as well as enabling cleaner and more sustainable work environments. The expanded Vystar product grades make it applicable in a wider range of latex products with the advantage of improved environmental impact through reduced leachables/extractables. The advances deliver a simplified, sustainable, totally safe raw material that Vystar can offer for several applications without reservations about nitrosamines. Production scale up of all three newer versions of Vytex NRL is currently being targeted as well as sample fulfillment.

Recently at the Nuremberg Toy Show (Speilwarenmesse) Vytex NRL was a targeted product for manufacturers of balloons, masks, etc. On the main page of the European Balloons and Party Council web site is a Yahoo video still plus a recent press release that discusses the benefits of Vytex NRL in items such as balloons. As there is a new proposal for limits on protein content of balloons by virtue of an EN listing, Vytex has now gone in to full prevulcanized testing to start the sampling process in this very large European manufacturing market (Italy, Austria, Spain, etc.) for balloons and has already spread to areas in Central and South America.

Over the course of several years, our technical groups has presented technical papers of varying topics that still hold relevance. Vytex NRL is produced at the latex processor level and can be integrated into the current processing environments without additional capital equipment investment. The protein removal and modification process that leads to Vytex NRL allows manufacturers to lower manufacturing costs with the benefit of reduced protein levels. Reduced leaching times and resulting reductions in energy, water and material handling consumption can lead to realized cost savings.

Also, “Eco-Friendly Manufacturing of High Performance Latex using Ultra Low Antigenic Protein Latex” reviewed some of the learnings Vystar had made since commercializing Vytex NRL. Among these discoveries were: improved air and helium retention in balloons; reduced leaching needs for some dipped products; truer colors for dyed dipped products (such as balloons); and low latex odor in foams, which has now led to unique research into areas previously considered off-limits to NRL. Vystar published and presented a paper, “Further Development of Vytex® Natural Rubber Latex Leads to Strong Niche Market Advances”, that added additional learnings related to slow release (memory) foam formulations and other technical improvements helping customers solve their new product development challenges.

Vystar has transitioned from toll manufacturing agreements to licensing agreements that eliminate the need to maintain a costly infrastructure along with the other investment and regulatory compliance costs to develop and operate a processing or manufacturing facility. All of these costs are or will be borne by our manufacturing and distribution contractors and/or customers. This means we must show the NRL producers and product manufacturers the economic value proposition of including Vytex NRL in their product lines, hence the technical paper presentations we have made and continue to make. In addition, as an all-natural raw material, Vytex NRL puts the main component in gloves and other products back in the environmentally friendly arena.

Increased interest in the exam glove arena has put Vystar in the enviable position of needing glove manufacturers to work with to handle the expected transition of healthcare companies, clinics and non-medical uses. Vystar is currently working with an American manufacturing facility to handle some of these needs as they prepare for production start up. Other glove manufacturers are also being sought.

To implement our licensing model, in March 2010 we signed a licensing agreement with Pica de Hule Natural, a division of Grupo Agroindustrial de Occidente (“Occidente”), located in Guatemala. Occidente is the largest processor of natural rubber latex in Latin America and the largest exporter serving more than 15 countries. Under the agreement, Occidente will manufacture, sell and market Vytex NRL throughout Latin America as well as supply Vytex NRL to North America and Europe. This agreement was continued in 2016.

In October 2010, we signed a second licensing agreement with KA Prevulcanized Latex (KAPVL) to manufacture and sell Vytex NRL in the SAARC region which includes India, Pakistan, Sri Lanka, Bangladesh, Bhutan and Nepal. India is the second largest consumer of concentrated latex behind China. In 2014 this agreement ended and we did not renew.

In addition, in January 2009, we entered into a Distribution Agreement with Centrotrade Minerals & Metals, US and Centrotrade Deutschland, GmbH, Germany, a leading global distributor of latex raw materials, to create a worldwide distribution network that will further enhance our ability to cost effectively reach and service manufacturer customers in these key manufacturing areas. This provides an expansive distribution network that facilitates both the licensing and toll manufacturing models and can assist with various processors in taking their products to market. On December 19, 2012, we amended our agreement with Centrotrade to expand Vytex NRL distribution rights to the world’s largest NRL consuming markets in Southeast Asia, specifically Malaysia and Thailand. Under this new license agreement, Centrotrade controls production scheduling of Vytex NRL, inventory in Thailand, sales, pricing and customer financing, while Vystar will focus on marketing, customized product development, as noted above, and support activities. Vystar currently has no exclusive areas under contract as RCMA, a Dutch based distributor was added in 2016.

The paper entitled, “The Non-Enzymatic Deproteinization of Natural Rubber Latex (DPNRL) Enabling the Greater Versatility in End Product Applications” discussed improvements that extend beyond the ultra-low allergenicity of the DPNRL and include improved color, absence of rubber odor, and improved physicochemical attributes. Improved air and helium retentions results were reported. The potential to extend applications into other non-conventional areas other than latex end products was discussed and we are currently in the final retail test market stages for the United States based manufacturing of mattresses, pillows and toppers to key furniture stores and buying groups, primarily in the Northeastern United States and signed a 5 year renewable agreement in January 2015 with Nature’s Home Solutions (NHS) to exclusively distribute these products in the United States. In September 2016, the Vystar Board of Directors voted to end the January 2015 NHS agreement and replace it with a global exclusive for foam manufactured with Vytex and sold into the home furnishings industry. This change reflects the global nature of the mattress, topper and pillow businesses, the need for local warehousing, and access to container loads of foam cores and pillows for European and Asian manufacturers.

Vystar has also expanded licensing arrangements into the consumer arena, with the licensing of foam products produced with and labeled as “Made with Vytex NRL”. Specifically working with partners, to introduce foam made with Vytex into the mattress, mattress topper and pillow arenas aligning with key foam manufacturers, mattress, mattress toppers and pillow producers, and furniture stores in specific areas of the Unites States. Vystar announced the signing of the aforementioned exclusive global distribution agreement with Worcester, MA based NHS who sources eco-friendly materials and technologies for use in furnishings and other markets. NHS has completed several trials with Vietnamese, European and Indian makers of foam products to use its Vytex NRL raw material in their current offerings in their own areas as well as to supply added needs for foam cores in both the mattress and topper arenas globally. The current requests from major mattress manufactures for Vytex foam trials involves different densities especially those used on the upper levels of mattresses. The samples have been presented to the manufacturers and feedback has been very positive with names such as Gold Bond, King Coil (Natura) and SpringAir (Nature’s Rest) adding Vytex to their current offerings. A similar trial occurred in October 2016 in Thailand focusing on specific densities and pillows, and a meeting with a Belgian foam maker using a unique drying concept occurred in May 2016 with discussions ongoing. In addition, working with NHS and a large Vietnamese foam manufacturer, Lien A, the group attended the International Sleep Products Association (ISPA) in Orlando in March 2016. The significance of ISPA is the focus on components for use with major mattress and pillow manufacturers, which takes Vytex foam to an additional audience.

Pricing of materials in the rubber and latex industries continues to fluctuate as noted by the graph below courtesy of Centrotrade. Prices of centrifuged latex, thus Vytex, have risen throughout 2016 and in to early 2017 due to various factors such as floods in southern Thailand, removal of older tress and replanting which is a seven-year process, newer plantations coming online, etc.

Competition

Natural Rubber Latex

Synthetic raw materials such as ethylene, propylene, styrene and butadiene compete with NRL. Currently, it is estimated that NRL processors have lost one-half of the overall latex market to synthetic latex. Despite the switch to non-latex alternatives, it is estimated that in U.S. hospitals as recently as September, 2010 over 70% of exam gloves and nearly 80% of surgical gloves were still made with NRL.

Several attempts, including new source crops, synthetic lattices and various treatment methods, have been made to eliminate problem proteins from Hevea NRL by biological, physical and/or chemical methods that act on proteins. One approach has been to introduce the latex articles to multiple leaching steps and chlorination. While it does reduce the protein levels in the finished product, it weakens the latex film thus compromising the desirable physical properties of the product. Another attempt to reduce proteins in NRL is the use of proteolytic enzymes to degrade the proteins in the latex solution but this approach introduces another protein (the enzyme) to the latex, which may itself be allergenic. Attempts to commercialize two other non-Hevea NRL materials have been made in the United States: guayule rubber latex and Taraxacum kok-saghyz, also known as the Russian dandelion. These materials are reported to be higher in cost compared to natural rubber latex and presently are available only in limited quantities.

These facts, coupled with the uncomplicated transition to the utilization of Vytex NRL, make it very attractive for processors to regain lost business by switching to Vytex NRL. We believe our unique patented technology offers a viable alternative to the marketplace. The licensing model will allow the message to spread through more sales channels than we could reach in the past.

Intellectual Property

Vystar has four issued patents by the United States Patent Trademark Office (“USPTO”) that were issued in 2005 (Patent No. 6,906,126), 2006 (Patent No. 7,056,970), 2011 (Patent No. 8,048,951) and 2012 (Patent No. 8,324,312). International patents include one issued patent from the Republic of South Africa in 2009 (2008/00886), a second foreign patent issued by China in 2011 (No. 200580051526.1), a third foreign patent issued by Japan in 2012 (No. 4944885) and a fourth foreign patent issued by Hong Kong in 2013 (HK1125959). In 2005, we sought international patent protection of our application that would become our U.S. Patent No. 6,906,126 pursuant to the Patent Cooperation Treaty (“PCT”) (No. PCT/US2005/025018), and this application has been nationalized in the following countries and regions: The European Union (No.05775523.3), Canada (No. 2,614,945), India (No.295/DELNP/2008), and Sri Lanka (No.14827). Additionally, this PCT was nationalized back into the United States to expand our protection to both method and composition claims (No.11/988,498). We expect patents to be issued in these countries without objection.

On January 18, 2012, we converted the provisional patent filed January 18, 2011 (No. 61/433,853) to full utility applications based on new discoveries and unexpected results (No. 13/374,851). We also sought international protection for the new developments and unexpected results reflected in this 2009 USPTO patent application through another PCT application (No. PCT/US2009/031445). This PCT application was nationalized in the following countries in 2010: the European Union (No. 09702339.4), Brazil (No. PI0906513-0), Guatemala (No. 2010-000208), India (No.2487/KOLNP/2010), Indonesia (No. W-00201002436), and Malaysia (No. PI2010003317). In addition, we filed the same patent application that was the subject of our USPTO patent application No. 12/356,355 and PCT/US2009/031445 directly into Thailand (No. 0901000201). Thailand has informed us that our patent application is now published for open comments.

The European Patent Office issued a Decision to Grant Vystar’s patent application under European Patent Number 1 902 089 titled “Decreasing Allergenicity of Natural Latex Rubber Prior to Vulcanization” greatly expanding the territory covered by the Company’s intellectual property portfolio. The mention of the grant was published in the European Patent Bulletin 13/35 dated 28 August 2013. Vystar selected the United Kingdom (065143-011612/UK), Germany (065143-011611/DE), and Austria (065143-001610/AT) as validation points for this specific patent. Also, on September 14, 2014, we were notified by the Patents Office of Ireland that Patent 1902089 covering the same above titled patent was awarded to the Company on August 28, 2013.

On December 9, 2016 Vystar was notified by our Singaporean IP Counsel that Malaysia Application No PI 2010003317 entitled “Natural Rubber Latex Having Reduced Allergenicity and Method of Making” was cleared for issuance and that a Notice of Grant will be issued.

Vystar filed and has received registered trademark protected status in the United States for the marks “Vystar”, “Vytex” and “Created by Nature. Recreated by Science.” In 2010 Vystar filed for international trademark protection of “Vytex” in Malaysia (No.2010013149) and India (No. 1992991), which was granted in India. On November 18, 2014, the Company was informed that the “VYTEX” trademark was registered in Malaysia effective May 30, 2014. The aforementioned marks have been renewed successfully in each period as required.

While we believe that the pending patent and trademark applications will be granted without objection, there are no guarantees that all such patents or trademarks will be granted by each relevant governing body. No assurance can be given that such patent and trademark protection will provide substantial protection from competition. We realize that the market for Vytex NRL is an industrialized world concern and we are committed to aggressively challenging any infringements of our patents and/or trademarks. As of December 31, 2016, Vystar has expended, since inception, approximately $276,155 on such patent and trademark costs and has budgeted approximately $10,000 more for the year ended December 31, 2017 to continue to pursue and maintain its patents and trademarks around the world.

Research and Development

Vytex NRL has produced protein test results on finished products that are both “below detection” and “not detectable” in terms of the amount of proteins remaining in these finished goods made with Vytex NRL. These results have been reproduced in many subsequent tests. From inception through December 31, 2016, Vystar’s research and development costs have been approximately $2.4 million. These efforts past and future have been and will continue to be patented and/or trademarked.

Government Regulation

Vytex:

In the United States, healthcare and many food and food-based packaging products are subject to regulation by the Food and Drug Administration (FDA). Vystar is not directly subject to regulation by the FDA due to the fact that it does not manufacture a finished medical device or other product, but only provides Vytex NRL as a component or raw material to healthcare or other product manufacturers. However, there will be FDA regulation of the labeling of healthcare and food-based packaging products that are produced with Vytex NRL and the FDA has promulgated standards for good manufacturing practices for manufacturing the end products, which makes the end product manufacturers responsible for seeing that all of their components and component manufacturers, including Vytex NRL, are produced using good manufacturing processes. Additionally, the FDA prohibits the use of the term “hypoallergenic” or “low protein” on any natural rubber latex product it regulates. In order to make any such claim, the latex product manufacturer must seek a waiver from the FDA of such regulatory prohibitions. Commentary by the FDA in its guidance documents and other rulings indicate that the prohibition on the use of the “hypoallergenic” or “low protein” label is based, at least in part, on the fact that, although the use of such terms in such labeling may be intended to indicate that the risk of allergic reaction to residual levels of processing chemicals has been reduced, consumers may interpret the labeling to mean that the risk of allergic reactions to any component in the device would be minimal. Thus the hypoallergenic or low protein label is deemed misleading. There can be no assurance, however, that we will succeed in securing FDA approval for any claim regarding the “hypoallergenic” “low protein” or reduced allergy potential of latex produced with the Vytex NRL process. Failure to secure, if required, such FDA approval, could delay or otherwise detrimentally affect our introduction to natural rubber latex healthcare and/or food packaging products regulated by the FDA. Notwithstanding, the medical or food packaging manufacturer will be able to use the Vytex NRL trademark on its label if size permits to indicate only that the Vytex NRL component was used in the production of the healthcare product, and what protein levels the end product does contain, but no further claim is asserted. We have been able to provide sufficient testing data to the FDA to support our protein level claims with respect to the natural rubber latex antigenic and total proteins present in end products made with Vytex NRL. On May 1, 2009, a condom manufactured from Vytex NRL received 510(k) clearance from the U.S. Food and Drug Administration. This was the first medical product available in the U.S. made from Vytex NRL, which had less than 2 micrograms/dm2, virtually undetectable levels, of the antigenic proteins that cause an allergic response, while retaining and improving upon all of the desirable qualities of latex. While the product is no longer available, this condom is a predicate device for future products and the 510(k) is still in existence. Vystar continues to seek other U.S. and global manufacturers interested in pursuing similar claims for products.

On July 22, 2009, a non-powdered medical exam glove manufactured with Vytex NRL received 510(k) clearance from the FDA, with an approved claim of less than 50 micrograms/gram of total proteins. As with the condom product, Vystar continues to pursue U.S. and global manufacturers using this exam glove as a predicate device and to help fill pending exam glove business. Late in 2016 the FDA banned the use of powder in medical gloves which took effect early in 2017 positioning the Vytex non-powdered exam glove in an excellent position.

Inflation and Seasonality

We do not believe that our operations are significantly impacted by inflation. Our NRL business is not seasonal in nature, but is subject to commodity pricing. Our NRL product is a commodity-based raw material and prices for such material fluctuate from day-to-day, though this will have less impact as we transition to sales via licensing fees.

Employees

As of December 31, 2016, Vystar had a total of one associate.

Corporate Information

Vystar Corporation is a Georgia corporation that was incorporated in 2003. Our predecessor company, Vystar LLC, was formed by our founder, Travis Honeycutt, in February 2000 as a Georgia limited liability company.

Our principal mailing address is 2480 Briarcliff Road, Ste 6, #159, Atlanta, GA 30329. Our website address is www.vytex.com. The information contained on, or that can be accessed through, our website is not a part of this Report. We have links on our website to reports, information statements, and other information that we file electronically with the Securities and Exchange Commission, or SEC, at the Internet website maintained by the SEC, www.sec.gov. In addition to visiting our website and the SEC’s website, you may read and copy public reports we file with or furnish to the SEC at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.

Our business is subject to a number of risks and uncertainties — many of which are beyond our control — that may cause our actual operating results or financial performance to be materially different from our expectations. If one or more of the events discussed in the following risks were to occur, actual outcomes could differ materially from those expressed in or implied by any forward-looking statements we make in this report or our other filings with the SEC, and our business, financial condition, results of operations or liquidity could be materially adversely affected; furthermore, the trading price of our common stock could decline and our shareholders could lose all or part of their investment.

Neither of our business divisions presently generates the cash needed to finance our current and anticipated operations.

We have had very limited revenue in our history prior to 2011 and transitioned from the development stage to the operational stage during the fourth quarter of 2009. We are still in the early stage of establishing our business including attracting new customers and increasing sales; our financial success will be dependent upon the soundness of our business concept, our management’s ability to successfully and profitably execute our plan, and our ability to raise additional capital.

In the Vytex Division, while we anticipate that revenue will continue to grow from what we achieved after transitioning from the development stage to the operational stage, our limited operating history makes it difficult to evaluate our business. We expect to make significant future operating expenditures to develop and expand our business. We may incur significant losses in the future for a number of reasons, including due to the other risks described in this Report, and we may encounter unforeseen expenses, difficulties, complications and delays and other unknown events. Accordingly, we may not be able to achieve or maintain profitability, and we may incur significant losses for the foreseeable future. See additional discussion under Liquidity and Capital Resources.

At December 31, 2016 we had $36,282 cash on hand and an accumulated deficit of $26,813,911. We plan to finance our operations for the next twelve (12) months through the use of cash on hand, stock warrant exercises from existing shareholders, raising of capital through private placements and the possible acquisition of cash flow positive foam business in key areas of the furniture world that includes finished mattresses, component cores, topper cores and pillows. You should consider, among other factors, our prospects for success in light of the risks and uncertainties encountered by companies that, like us, have not generated net earnings on an annual basis. Various factors, such as economic conditions, regulatory and legislative considerations, and competition, may also impede our ability to expand our market presence. We may not successfully address these risks and uncertainties or successfully implement our operating strategies. If we fail to do so, it could materially harm our business and impair the value of our common stock. Even if we accomplish these objectives, we may not generate positive cash flows or profits we anticipate in the future.

The following risk factors apply to our Vytex Division:

Our Vytex operating results could fluctuate and differ considerably from our financial forecasts.

Our business model is based on assumptions derived from (i) the experience of the principals of the Company, and (ii) third party market information and analysis. There are no assurances that these assumptions will prove to be valid for our future operations or plans.

Our operating results may fluctuate significantly as a result of a variety of factors, including:

Our Vytex NRL Division business is totally dependent on market demand for, and acceptance of, the Vytex Natural Rubber Latex process.

We expect to derive most of our Vytex NRL Division revenue from the sales of our Vytex Natural Rubber Latex raw material to various manufacturers of rubber and rubber end products using NRL through our distribution agreement with Centrotrade Deutschland. We pay natural rubber latex processors a fee for the service of manufacturing and creating Vytex NRL for us under our toll manufacturing agreements. Conversely, Vystar collects a fee under the Centrotrade and Occidente (PICA) licensing models. The agreement in the bedding and furniture industries with NHS also provides income based on a license model. Our Vytex NRL product operates within broad, diverse and rapidly changing markets. As a result, widespread acceptance and use of product is critical to our future growth and success. If the market for our product fails to grow or grows more slowly than we currently anticipate, demand for our product could be negatively affected.

Our ability to generate significant revenue in the Vytex Division is substantially dependent upon the willingness of consumers to make discretionary purchases and the willingness of manufacturers to utilize capital for research and development and the retooling of their manufacturing process, both of which are impacted by the state of the economy.

The current state of the world economy has and likely will in the future impact upon our ability to increase revenue. Certain of the products that we anticipate will be manufactured with our Vystar NRL process, such as mattresses and sponge products, are considered discretionary consumer purchases which decline during economic downturns. Additionally, certain manufacturers who might otherwise utilize the Vytex NRL process in the manufacturing of products with NRL have determined not to expend capital to complete the research of the Vytex NRL process or to retool their manufacturing process because of the general downturn in the economy. As part of a strategy to increase awareness of the Vytex NRL brand, the Company has been aggressively seeking to have end products produced and labeled “made with Vytex NRL” such as mattresses, toppers and pillows. As these products enter the market, the Company plans to create consumer awareness of these end products and in so doing begin to develop consumer demand pull through as part of the Company’s efforts to complete the push-pull cycle using an ingredient branding strategy.

Assertions by a third party that our Vytex process infringes its intellectual property, whether or not correct, could subject us to costly and time-consuming litigation or expensive licenses.

There is frequent litigation based on allegations of infringement or other violations of intellectual property rights. As we face increasing competition and become increasingly visible as an operating company, the possibility of intellectual property rights claims against us may grow.

Any intellectual property rights claim against us or our customers, with or without merit, could be time-consuming, expensive to litigate or settle and could divert management attention and financial resources. An adverse determination also could prevent us from offering our process, require us to pay damages, require us to obtain a license or require that we stop using technology found to be in violation of a third party’s rights or procure or develop substitute services that do not infringe, which could require significant resources and expenses.

The latex market in which we will participate is competitive and if we do not compete effectively, our operating results may be harmed.

The markets for our product are competitive and rapidly changing. With the introduction of new technologies, increasing scrutiny of alternative lattices such as Russian dandelion, and market entrants, we expect competition to intensify in the future. In addition, pricing pressures and increased competition generally could result in reduced sales, reduced margins or the failure of our products to achieve or maintain widespread market acceptance.

While early interest was strong in a new innovative product in the natural rubber latex industry, pricing and regulatory approvals remain a key selling factor especially in the exam glove arena. There is no exam glove manufacturer signed to date that has accepted Vytex NRL into its product mix.

Our Vytex revenue will vary based on fluctuations in commodity prices for NRL.

NRL is a commodity and, as such, its price fluctuates on a daily basis. Since 2009 the market prices have been particularly volatile with prices rising 222% from a low of approximately $1080/wet metric tonne (mT) in January 2009 to a peak of over $3475/wet mT in February 2011. While prices have come down from this high to as low as $2100/wet mT in December 2011, 2012 prices started to rise again primarily due to seasonality. The pricing model for 2013 continued the rollercoaster ride and as of December 31, 2013 stood at $2576/wet mT. At the end of 2015 pricing for NRL was at about US$ 800 per mT and current pricing as of the end of March 2016 was approximately $1100 mT. Our revenue (even licensing fees) and cost of goods will also fluctuate upward or downward based upon changing market prices for the raw material used to produce Vytex NRL. Prolonged periods of lowered market prices can also cause manufacturers to review synthetic price drops as they look for even lower cost alternatives to NRL.

While Vytex NRL has received 510(k) clearance from the FDA for condoms and exam gloves, there is no assurance that future applications will be cleared.

In order for Vytex to be used in medical device applications, the manufacturer of the end product must submit an application to the FDA. If the device is classified by the FDA as Class II (e.g., condoms, surgical gloves, and most non-cardiac and non-renal/dialysis catheters) and in some cases Class I (e.g., exam gloves), a 510(k) application must be filed with the FDA seeking clearance to market the device based on the fact that there is at least one other predicate or similar device already marketed. If the product is classified as a Class III product (e.g., most cardiac and renal/dialysis catheters, certain adhesives and other in vivo devices), or is otherwise a new device with no predicate on the market already, then the manufacturer of the end product must submit a Pre-Market Approval (“PMA”) application seeking approval by the FDA to market the device. The PMA approval process is much more in depth and lengthy and requires a greater degree of clinical data and FDA review than does a 510(k) clearance process.

Since Vytex is a raw material and not an end-product, Vystar is not the entity that files with the FDA for any clearance or approval to market a device. Instead, the end-product manufacturers who will be selling and marketing the device(s) must submit applications and seek FDA clearance or approval depending upon the device classification. Vystar’s role in this process is only as background support to the manufacturers to supply information and any technical or test data regarding the Vytex raw material if and to the extent needed.

An American manufacturer of condoms and exam gloves had been engaged in production work and had completed required testing and received FDA clearance for using Vytex NRL in their condom and exam glove lines. However this manufacturer is not currently producing products made with Vytex NRL or any other type of raw material. Notwithstanding such approvals, we have no assurance that future products will provide acceptable test results and even if they do, there is no certainty that the FDA will approve the applications.

Each of the above mentioned 510(k)s have been sold to other manufacturers.

Vytex may seek to have lower protein claims than what is currently on the market today for exam gloves, and may ultimately seek to have latex warnings removed from or modified on all FDA-regulated products, but it cannot guarantee that either of such actions will be approved by the FDA.

The FDA heavily scrutinizes any and all claims categorizing the protein levels and other claims of an NRL product. Currently, the FDA has allowed claims only stating the level of less than 50 micrograms/gram of total extractable proteins pursuant to only one of two FDA-recognized standards on exam or surgical gloves. Vystar intends to claim protein levels pursuant to both of the two FDA-recognized standards, which will result in claiming the lowest level of antigenic proteins for a Hevea NRL product currently on the market. Although the FDA has cleared such claims on the condom using Vytex NRL, the FDA rejected those claims for the exam glove. There is no guarantee that the FDA will ultimately or ever allow these claims on an exam glove.

Additionally, for many years, the FDA has required warnings on products containing latex due to the latex allergy issue that exists. Vystar plans on petitioning the FDA to have that label removed from or modified on products manufactured with Vytex NRL, by filing a Citizen’s Petition. The Petition will be filed when we see that the benefits of filing will far outweigh the costs since such Petition is likely to require clinical test results indicating acceptable allergic reactions associated with Vytex NRL. There are no assurances that the FDA will grant that request.

Manufacturers are implementing trials of Vytex NRL in their facilities but final data are not yet available from all these manufacturers on its viability for their particular environments.

Over the past several years, samples of Vytex NRL have been made available to over 50 natural rubber latex and latex substitute end product manufacturers, 30 of which have been in place since early 2009. Since the completion of the Vytex NRL Standard Operation Procedures (SOPs), Vytex has been produced at Revertex (Malaysia), Occidente (Guatemala), KAPVL (India) and most recently Mardec-Yala (Thailand) and MMG (Thailand). Manufacturers that have signed a ‘sampling’ agreement with us have been provided with samples of Vytex NRL for validating its use in their manufacturing processes. To date, a number of manufacturers have completed those runs and feedback is often minimal. Although most feedback to date has been positive, there is no assurance that such feedback continues to be satisfactory.

Another risk is the validity of the customer as testing completes. Recently Vystar has completed more than three years of a specialized version of Vytex NRL only to have the end product manufacturer fail to upgrade their production line and fulfill their own contract.

As part of the Company’s learnings, we have found that in listening closely to customer challenges and needs, our technical team has been able to develop solutions. The Company has come to realize that what we offer is not just a raw material but often a technology solution to a production or product development challenge.

While many of these new formulations look promising, there is no guarantee that these technological innovations will be successfully scaled up or successfully implemented by the customer.

The following risk factors apply to our company as a whole:

We do not expect to declare any dividends in the foreseeable future.

We do not anticipate declaring any cash dividends to holders of our common stock in the foreseeable future. Consequently, shareholders must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investment. Investors seeking cash dividends should not purchase our common stock.

There is no assurance that any significant public market for our shares of common stock will develop.

While our shares of common stock trade on the OTC Bulletin Board under the symbol “VYST”, there is currently no significant public market for our common stock and there is no assurance that there will be any such significant public market for our common stock in the future.

The utilization of our tax losses could be substantially limited if we experience an ownership change as defined in the Internal Revenue Code.

Because of net operating losses we have experienced for federal income tax purposes at December 31, 2016, we had federal net operating loss (“NOL”) carry-forwards of approximately $18.7 million ($17.9 million for 2015) pretax available to offset future taxable income. Our ability to utilize NOL carry-forwards to reduce future taxable income may be limited under Section 382 of the Internal Revenue Code if certain ownership changes in our Company occur during a rolling three-year period. These ownership changes include purchases of common stock under share repurchase programs, the offering of stock by us, the purchase or sale of our stock by 5% shareholders, as defined in the Treasury regulations, or the issuance or exercise of rights to acquire our stock. If such ownership changes by 5% shareholders result in aggregate increases that exceed 50 percentage points during the three-year period, then Section 382 imposes an annual limitation on the amount of our taxable income that may be offset by our NOL carry-forwards or tax credit carry-forwards at the time of ownership change. The limitation may affect the amount of our deferred income tax asset and, depending on the limitation, a significant portion of our NOL carry-forwards or tax credit carry-forwards could expire before we are able to use them. In such an event, our business, financial condition, results of operations or cash flows could be adversely affected.

We believe we have not experienced an ownership change under Section 382 of the Internal Revenue Code as of December 31, 2016; however, the amount by which our ownership may change in the future could be affected by purchases and sales of stock by 5% shareholders and new issuances of stock by us, should we choose to do so.

None

Although we believe that our current space is adequate for the foreseeable future, if additional office space is required, we believe that suitable space will be available at market rates.

None 

Not applicable

PART II.

Market Price Information

Our common stock is traded in the United States on the Over the Counter Bulletin Board (OTCBB) under the symbol “VYST.” The following table shows the range of high and low closing prices for our common stock.

Holders

As of December 31, 2016, there were 477 holders of record of our common stock. 

Dividends

We have never paid or declared any cash dividends on our common stock and we do not intend to pay or declare dividends on our common stock in the near future. We presently expect to retain any future earnings to fund continuing development and growth of our business. Our payment of dividends is subject to the discretion of our board of directors and will depend on earnings, financial condition, capital requirements and other relevant factors.

Issuer Purchases of Equity Securities

We did not make any repurchases of our equity securities during the 2016 fiscal year.

Securities Authorized for Issuance Under Equity Compensation Plans

Information concerning our equity compensation plans is set forth in Item 12 of Part III of this Annual Report on Form 10-K.

Recent Sales of Unregistered Securities

Common Stock and Warrant Grants

From January 1, 2016 through December 31, 2016, we issued 1,247,466 shares of our common stock valued at $70,000 for services rendered to the Company in 2016 and 14,180,000 shares were issued in investments valued at $709,000.

From January 1, 2016 through December 31, 2016, we issued warrants to purchase 217,580 shares of common stock for services rendered to the Company per the following:

Stock Option Grants

From January 1, 2016 through December 31, 2016, we issued 500,000 options to purchase common stock to Board members and employees per the following:

Application of Securities Laws and Other Matters

No underwriters were involved in the foregoing sales of securities. The securities described above were issued to investors in reliance upon the exemption from the registration requirements of the Securities Act, as set forth in Section 4(2) under the Securities Act and Regulation D promulgated thereunder, as applicable, relative to sales by an issuer not involving any public offering, to the extent an exemption from such registration was required.

The issuance of stock options as described above were issued pursuant to written compensatory plans or arrangements with our employees, directors and consultants, in reliance on the exemption provided by Rule 701 promulgated under the Securities Act. All recipients either received adequate information about us or had access, through employment or other relationships, to such information.

All of the foregoing securities are deemed restricted securities for purposes of the Securities Act. All certificates representing the issued shares of common stock, warrants and options described above included appropriate legends setting forth that the securities had not been registered and the applicable restrictions on transfer.

As a smaller reporting company, we are not required to provide the information required by this Item pursuant to 301(c) of Regulation S-K.

This analysis of our results of operations should be read in conjunction with the accompanying financial statements, including notes thereto, contained in Item 8 of this Report. This Report contains certain forward-looking statements within the meaning of Section 27A of the Securities Act, and Section 21E of the Exchange Act. Statements that are predictive in nature and that depend upon or refer to future events or conditions are forward-looking statements. Although we believe that these statements are based upon reasonable expectations, we can give no assurance that projections will be achieved. Please refer to the discussion of forward-looking statements included in Part I of this Report.

Overview

Vystar LLC, the predecessor to the Company, was formed February 2, 2000, as a Georgia limited liability company by Travis W. Honeycutt. Operations under the LLC entity were focused substantially on the research, development and testing of the Vytex® Natural Rubber Latex (“NRL”) process, as well as attaining intellectual property rights. In 2003, the Company reorganized as Vystar Corporation, a Georgia corporation, at which time all assets and liabilities of the limited liability company became assets and liabilities of Vystar Corporation, including all intellectual property rights, patents and trademarks.

We are the creator and exclusive owner of the innovative technology to produce Vytex NRL. This technology reduces antigenic protein in natural rubber latex products to virtually undetectable levels in both liquid NRL and finished latex products. The process also removes many of the naturally occurring non-rubber particles superfluous to end product function, resulting in a cleaner latex base material. We have introduced Vytex NRL, our “ultra-low protein” natural rubber latex, throughout the worldwide marketplace that uses NRL or latex substitutes as a component of manufactured products. Natural rubber latex is used in an extensive range of products including balloons, textiles, footwear and clothing (threads), adhesives, foams, furniture, carpet, paints, coatings, protective equipment, sporting equipment, and especially health care products such as condoms, surgical and exam gloves. We produce Vytex through toll manufacturing and licensing agreements and have introduced Vytex NRL into the supply channels with aggressive, targeted marketing campaigns directed to the end users.

We transitioned from a development stage company to the operating stage during the last quarter of 2009. During the last five years, our financial condition and results of operations have experienced substantial fluctuations as we provided introductory pricing in 2010 and then began to switch to a licensing rather than a toll model in 2011. Accordingly, the financial condition and results of operations reflected in our historical financial statements are not expected to be indicative of our future financial condition and results of operations.

We believe that the key for increased Vytex NRL product acceptance is to focus on companies seeking solutions to production challenges or ways to differentiate their product offering. Vystar’s technical team has been successful in developing customized formulations to meet specific manufacturer needs. Some of these formulations will become new line extensions. Vystar is becoming less of a raw material provider and more of a technology innovator through its technical consultation and formulation activities.

In addition to this technology focus, we are determined to have the “made with Vytex” claim added to products made using various forms of Vytex NRL. To help drive this effort we’re focusing on products that benefit from Vytex NRL low non-rubber features. As part of this effort, we are working with a licensee to launch a line of foam core products used in various bedding products including pillows, mattresses and mattress toppers.

In January 2015 Vystar announced that it had entered into an exclusive agreement with Nature’s Home Solutions (NHS) to distribute mattresses, mattress toppers and pillows made with its multi-patented Vytex NRL raw material. NHS is a distribution company led by Steve Rotman of Rotman’s Furniture and focuses on innovative, sustainably sourced, eco-friendly material and technologies for use in furnishings and other markets. Our Vytex NRL fits the needs of this unique new distributor which has already attracted such firms as mattress manufacturer Gold Bond that was formed in 1899 to manufacture and then distribute mattresses, toppers and pillows along with a plan to reach specific segments of the United States by targeting other manufacturers. This has been the focus of Vystar for 2015 and 2016 and will continue through 2017 as we display at furniture and mattress conventions and attend and sell at sleep products meetings such as ISPA 2016 (International Sleep Products Association) held in Orlando, FL and ISPA 2017 in Tampa, FL. Vystar will also continue to develop specialty versions of Vytex NRL after presenting to the International Latex Conference in Akron OH in July 2016 and 2017 and sending out samples for lab trials. Vystar is currently producing Vytex thread samples for an entry into the thread marketplace. In September 2016, the Vystar Board of Directors voted to end the January 2015 agreement and replace it with a global exclusive for foam manufactured with Vytex and sold into the home furnishings industry. This change reflects the global nature of the mattress, topper and pillow businesses.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles. As such, we are required to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. By their nature, these estimates and judgments are subject to an inherent degree of uncertainty. Our management reviews its estimates on an on-going basis. We base our estimates and assumptions on historical experience, knowledge of current conditions and our understanding of what we believe to be reasonable that might occur in the future considering available information. Actual results may differ from these estimates, and material effects on our operating results and financial position may result.

We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our financial statements.

Fair Value Inputs Related to Share-based and Other Equity Compensation

Generally accepted accounting principles require all share-based payments, including grants of employee stock options, stock grants and warrants, to be recognized in the financial statements based on their fair values. We compute the value of awards granted by utilizing the Black-Scholes valuation model based upon their expected lives, expected volatility, expected dividend yield, and the risk-free interest rate. The value of the awards is then straight-line expensed over the service period of the awards.

Allowance for Doubtful Accounts

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. Our allowances for doubtful accounts amounted to $0 and 60,266 for December 31, 2016 and 2015 respectfully.

Fixed Asset Lives

We estimate the useful life of equipment and other fixed assets using judgment, conventions in the industries in which we operate, and research on resale values. We review equipment and fixed asset lives annually in our impairment analyses.

Impairment Analyses

We review long-lived assets such as property and equipment for impairment whenever events or changes in circumstances indicate the carrying value may not be recoverable. If the total of the estimated undiscounted future cash flows is less than the carrying value of the assets, an impairment loss is recognized for the excess of the carrying value over the fair value of the long-lived assets.

Income Taxes

We account for income taxes using the assets and liability method. This method requires that the deferred tax consequences of temporary differences between the amounts recorded in our financial statements and the amounts included in our federal and state income tax returns be recognized in the balance sheet. Estimates are often required with respect to, among other things, the potential utilization of any operating and capital loss carry-forwards for both federal and state income tax purposes and valuation allowances required, if any, for tax assets that may not be realizable in the future. We believe that it is more likely than not that the amounts recorded as deferred income tax assets will not be recoverable through future taxable income generated by us. As a result, the Company recorded a 100% valuation allowance against our net deferred tax assets as of December 31, 2016 and 2015. We believe the procedures and estimates used in our accounting for income taxes are reasonable and in accordance with established tax law. A tax benefit arising from an uncertain tax position can only be recognized for financial reporting purposes if, and to the extent that, the position is more likely than not to be sustained in an audit by the applicable taxing authority. We had no material unrecognized tax benefits and related tax liabilities at December 31, 2016 and 2015. Penalties related to uncertain tax positions would be recorded as a component of general and administrative expenses. Interest relating to uncertain tax positions would be recorded as a component of interest expense. We do not believe there will be any such uncertain tax position, costs or liabilities for any of the years under audit, and take a conservative approach to all tax matters.

RESULTS OF OPERATIONS

Year ended December 31, 2016 compared to year ended December 31, 2015

Revenues

Consolidated revenues for the fiscal year ended December 31, 2016 and 2015 from the Company were $122,546 and $378,666, respectively, for a decrease of $256,120 or 67.6%. The decrease in revenues from operations was principally due to the closing of the Kiron division. Revenues for the fiscal year ended December 31, 2016 and 2015 from the Company’s continuing operations were $40,193 and $47,268, respectively, for a decrease of $7,075 or 15.0%. The decrease in revenues from continuing operations was due to lower latex prices.

Gross profit for the fiscal year ended December 31, 2016 and 2015 from the Company were $81,851 and $110,567, respectively for a decrease of $28,716 or 26.0%. Gross profit from continuing operations for the fiscal year ended December 31, 2016 and 2015 was $19,720 and $28,647, respectively, for a decrease of $8,927 or 31.2%. Cost of revenue from continuing operations for fiscal year ended December 31, 2016 and 2015 was $20,473 and $18,621, respectively an increase of $1,852 or 9.9%.

Operating Expenses

The Company’s operating expenses consist of general and administrative expenses. General and administrative expenses consist primarily of compensation and support costs for management and administrative staff, and for other general and administrative costs, including professional fees related to accounting, finance, and legal services as well as other operating expenses. The Company’s consolidated operating expenses were $1,120,399 and $1,178,344 for the fiscal year ended December 31, 2016 and 2015, respectively, for a decrease of $57,945 or 4.9%. The Company’s operating expenses from continuing operations for the fiscal year ended December 31, 2016 and 2015 were $1,096,354 and $888,594, respectively, for an increase decrease of $207,760 or 23.4%. This was primarily the result of increased legal, patent, marketing expense in 2016.

Other Income (Expense)

Other income (expense) for the fiscal year ended December 31, 2016 and 2015 were ($17,157) and ($19,348), respectively for a decrease of $2,191 or 11.3%. Interest expense for the fiscal year ended December 31, 2016 and 2015 were $165,594 and $151,795, respectively for an increase of $13,799 or 9.1%. This was a primarily a result of an increase in the LIBOR index rate on the CMA Loan as well as additional Shareholder Notes 2016.

Net Loss

Net loss for the fiscal year ended December 31, 2016 and 2015 were $1,221,298 and $1,238,878, respectively for a decrease of $17,580 or 1.4%. The smaller net loss the Company experienced in the fiscal year ended December 31, 2016 versus the same period in 2015 was primarily attributable to the reduction in third-party contract services.

LIQUIDITY AND CAPITAL RESOURCES

The Company’s financial statements are prepared using the accrual method of accounting in accordance with accounting principles generally accepted in the United States of America and have been prepared on a going concern basis, which contemplates the realization of assets and the settlement of liabilities in the normal course of business. However, we have incurred significant losses and experienced negative cash flow since inception. At December 31, 2016, the Company had cash of approximately $36,282 and a deficit in working capital of $2,723,541. For the year ended December 31, 2016, the company had a net loss of $1,221,298 and an accumulated deficit of $26,814,649. For the year ended December 31, 2015, the company had a net loss of $1,238,878 and the accumulated deficit amounted to $25,593,351. We use working capital to finance our ongoing operations and since those operations do not currently cover all of our operating costs, managing working capital is essential to our Company’s future success.

Net cash used in operating activities was $907,441 for the year ended December 31, 2016 as compared to $656,829 for the year ended December 31, 2015. During the year ended December 31, 2016, cash used in operations was primarily due to the net loss for the year of $1,221,298 net of non-cash related add-back of share-based compensation expense of $242,159.

Net cash provided by investing activities was $2,701 during the year ended December 31, 2016 as this was a result of selling some equipment. During the year ended December 31, 2015, $281 was the result of selling some equipment as well.

Net cash provided by financing activities was $911,963 during the year ended December 31, 2016, as compared to cash provided of $611,837 during the year ended December 31, 2015. During 2016 cash was provided from the issuance of common stock in the amount of $723,456, $53,500 in cash was provided by the exercise of common stock warrants and options and $135,000 in proceeds from Shareholder Notes. In 2015, the cash provided was exclusively from the issuance of common stock.

A successful transition to attaining profitable operations is dependent upon obtaining sufficient financing to fund the Company’s planned expenses and achieving a level of revenue adequate to support the Company’s cost structure. Management plans to finance future operations through the use of cash on hand, increased revenue from Vytex license fees that now also include the company’s association with foam cores made out of Vytex used in mattresses, mattress toppers and pillows, stock warrant exercises from existing shareholders, and raising capital through private placement memoranda (see Note 15, Subsequent Events). As a result of this history of losses and financial condition, there is substantial doubt about the Company’s ability to continue as a going concern.

There can be no assurances that we will be able to achieve projected levels of revenue in 2017 and beyond. If we are not able to achieve projected revenue and obtain alternate additional financing of equity or debt, we would need to significantly curtail or reorient operations during 2017, which could have a material adverse effect on our ability to achieve our business objectives and as a result, may require the Company to file for bankruptcy or cease operations. The financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or amounts classified as liabilities that might be necessary should the Company be forced to take any such actions.

Our future expenditures will depend on numerous factors, including: the rate at which we can introduce and license Vytex NRL raw material and the foam cores made from Vytex to manufacturers and subsequently retailers, the costs of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights; and market acceptance of our products and services and competing technological developments. As we expand our activities and operations, our cash requirements are expected to increase at a rate consistent with revenue growth after we achieve sustained revenue generation.

Off-Balance Sheet Arrangements

We do not have any material off-balance sheet arrangements.

Certain Relationships and Related Transactions

On April 29, 2011, the Company executed with CMA Investments, LLC, a Georgia limited liability company (“CMA”) a line of credit (Note 5) with a principal amount of up to $800,000 (the “CMA Note”). CMA is a limited liability company of which three of Vystar’s directors are CMA members. Proceeds under the line were drawn to pay off amounts owed under the Topping Lift Agreement and for general working capital purposes. Under the terms of the CMA Note, the Company may draw up to a maximum principal amount of $800,000. Interest and fees were paid by an affiliated entity of a director of the company. Pursuant to an agreement between the Company and such affiliate, the Company will issue common stock to such affiliate with a value equal to such interest and fees paid based on the closing price of the common stock on the OTC Bulletin Board on the date of such payments. The maturity date of the CMA Note was April 29, 2013. The CMA Note is unsecured and no payments of principal are due until the second anniversary of the CMA Note, at which time all outstanding principal is due and payable. As compensation to the directors for providing the CMA Note, the Company issued warrants to purchase 2,600,000 shares of the Company’s common stock to the directors at $.45 per share which was the closing price of the Company’s common stock on that day, which was later adjusted to $.27 per share, which was the closing price of the Company’s common stock on the day it was adjusted.

On September 14, 2011, the Company’s Board of Directors approved increasing the line of credit to $1,000,000 and the Company’s Chairman and Chief Executive Officer became a member of CMA. As compensation for increasing the credit line, the directors approved issuing warrants to purchase an additional 1,600,000 shares of the Company’s common stock at $.27 per share, which was the closing price of the Company’s common stock on that day.

On November 2, 2012, the Board of Directors approved an increase in the line of credit from $1,000,000 to $1,500,000. As compensation to the CMA members, we issued warrants to purchase an additional 2,100,000 shares of the Company’s common stock at $0.35 per share. The closing price of the Company’s stock on November 2, 2013 was $0.21. The warrants vest 20% immediately and 16% upon each $100,000 draw above $1,000,000. Substantially all of the additional $500,000 had been drawn as of December 31, 2012 and vesting was completed. Accordingly, $143,726 was capitalized into deferred financing costs for the warrants in 2012. These costs were amortized to interest expense over the remaining term of the CMA Note.

On April 29, 2013, the maturity date of the CMA Note was extended to April 29, 2014. As compensation to the CMA Directors for extending the maturity date of the CMA Note, the Board of Directors approved modifying the exercise price for the 6,300,000 compensatory stock purchase warrants previously issued to the Directors to $0.10 per share and the CMA Directors forfeited 630,000 of the warrants. Amortization of the financing costs associated with extending the CMA Note was amortized through interest expense.

As of April 29, 2015, the maturity date of the CMA Note was again extended for one year to April 29, 2016. No compensation was paid to the CMA Directors for this extension. The note is currently due on demand.

As a smaller reporting company, we are not required to provide the information required by this Item pursuant to 301(c) of Regulation S-K.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders

Vystar Corporation

Atlanta, Georgia

We have audited the accompanying balance sheets of Vystar Corporation (the Company) as of December 31, 2016 and 2015, and the related statements of loss, stockholders' deficit, and cash flows for the years then ended. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting.  Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting.  Accordingly, we express no such opinion.  An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Vystar Corporation as of December 31, 2016 and 2015, and the results of its operations and its cash flows for the years then ended, in conformity with U.S. generally accepted accounting principles.

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the financial statements, the Company's recurring losses from operations, capital deficit, and limited capital resources raise substantial doubt about its ability to continue as a going concern. Management’s plans in regard to these matters also are described in Note 2 to the financial statements. These financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Atlanta, Georgia

April 14, 2017

VYSTAR CORPORATION

BALANCE SHEETS

For the Year Ended December 31,

The accompanying notes are an integral part of these financial statements.

VYSTAR CORORATION

STATEMENTS OF LOSS

For the Year Ended December 31,

The accompanying notes are an integral part of these financial statements.

VYSTAR CORPORATION

STATEMENTS OF STOCKHOLDERS’ DEFICIT

For the Years Ended December 31, 2016 and 2015

The accompanying notes are an integral part of these financial statements.

VYSTAR CORPORATION

STATEMENTS OF CASH FLOWS

For the Years Ended December 31,

The accompanying notes are an integral part of these financial statements.

VYSTAR CORPORATION 

NOTES TO FINANCIAL STATEMENTS

December 31, 2016 and 2015

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

History and Nature of Business

Vystar Corporation (“Vystar”, the “Company”, “we”, “us”, or “our”) is the creator and exclusive owner of the innovative technology to produce Vytex® Natural Rubber Latex (“NRL”). In addition, on June 28, 2013, Vystar Corporation (the “Company”) completed the acquisition of Kiron Clinical Sleep Lab, LLC (“Kiron”) a vertically integrated sleep diagnostic practice located in Durham, NC. We effectively closed Kiron in April 2016 due to changes in the healthcare insurance marketplace resulting in higher insurance deductibles and challenges in getting new studies and payment for completed studies. In essence, since the acquisition, changes to the health care insurance market shifted expenses for sleep studies and DME for many, back to the patients who need to meet higher deductibles before insurance coverage begins. This impacted getting new studies scheduled and challenges to getting payment for past studies. Also, the physician managing the practice left the practice and the remaining staff was ineffective in running the operation without direct supervision, which was impossible to provide from Vystar Corporation headquarters in Atlanta. Because of the closure of Kiron and previous closure of SleepHealth, Vystar Corporation has returned its focus to expanding the licensing and utilization of its proprietary source natural rubber latex technology. Vytex NRL uses a global multi-patented technology and proprietary formulation to reduce non-rubber particles including the antigenic proteins associated with latex allergies, resulting in a cleaner form of latex. In fact, the antigenic protein levels are reduced to virtually undetectable levels. This new licensing of branded consumer products was noted in a press release dated March 19, 2014. On January 22, 2015, Vystar announced the signing of an exclusive domestic distribution agreement with Worcester, MA based Nature’s Home Solutions (NHS) who sources eco-friendly materials and technologies for use in furnishings and other markets. On March 4, 2015, the Company announced that Hartford, CT based Gold Bond formed a strategic alliance with NHS to produce and market the world’s first Vytex NRL based mattress which was introduced at the High Point (NC) Market mid-April 2015. In June 2015, the first mattresses made with Vytex (hybrid and pure Vytex) were placed on the sales floor at Rotman’s Furniture and Carpet Store in Worcester, MA using the “Evaya” brand and Gold Bond had shipped four versions of their “Brilliance” inner coil and pure foam mattresses (Emerald, Ruby, Sapphire Plush and Sapphire Firm) to over 30 stores from Maine to Florida.

Basis of Presentation

The financial statements are presented in accordance with accounting principles generally accepted in the United States of America (“GAAP”) as codified in the Financial Accounting Standards Board’s (“FASB”) Accounting Standards Codification.

The Company has evaluated subsequent events through the date of the filing of its Form 10-K with the Securities and Exchange Commission. Other than those events disclosed in Note 15, the Company is not aware of any other significant events that occurred subsequent to the balance sheet date but prior to the filing of this report that would have a material impact on the Company’s financial statements.

Reclassification

Certain items in the prior year’s financial statements have been reclassified in order to conform with the current year presentation. Specifically note such reclassifications for discontinued operations.

Estimates

The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying disclosures. Although these estimates are based on management’s best knowledge of current events and actions the Company may undertake in the future, actual results could differ from these estimates. Examples include valuation allowances for deferred tax assets, provisions for bad debts, and fair values of share-based compensation and other equity issuances.

Concentration of Credit Risk

Certain financial instruments potentially subject the Company to concentrations of credit risk. These financial instruments consist primarily of cash and accounts receivable. Cash held in operating accounts may exceed the Federal Deposit Insurance Corporation, or FDIC, insurance limits. While we monitor cash balances in our operating accounts on a regular basis and adjust the balances as appropriate, these balances could be impacted if the underlying financial institutions fail. To date, we have experienced no loss or lack of access to our cash; however, we can provide no assurances that access to our cash will not be impacted by adverse conditions in the financial markets.

Accounts Receivable

Accounts receivable are stated at the amount management expects to collect from outstanding balances. Management provides for uncollectible amounts through a charge to earnings and a credit to an allowance for doubtful accounts based upon its assessment of the current status of individual accounts. Balances that are still outstanding after management has performed reasonable collection efforts are written off through a charge to the allowance and a credit to accounts receivable. As of December 31, 2016 and 2015, we have provided for uncollectible amounts through a charge to earnings and the income statement of $0 and $60,266, respectively. We grant credit to our customers without requiring collateral. The amount of accounting loss for which we are at risk in these unsecured accounts receivable is limited to their carrying value.

Vytex customers are located in both the United States and internationally.

Property and Equipment

Property and equipment is stated at cost. Depreciation is provided by the use of the straight-line and accelerated methods for financial and tax reporting purposes, respectively, over the estimated useful lives of the assets, generally 5 years.

Intangible Assets

Patents represent legal and other fees associated with the registration of patents. The Company has four issued patents with the United States Patent and Trade Office (USPTO) as well as four issued international PCT (Patent Cooperation Treaty) patents. Patents are carried at cost and are being amortized on a straight-line basis over their estimated useful lives, typically 20 years.

The Company has trademark protection for “Vystar”, “Vytex”, and “Created by Nature. Recreated by Science.” Trademarks are carried at cost and since their estimated life is indeterminable, no amortization is recognized. Instead, they are evaluated annually for impairment.

Impairment of Long-lived Assets

Long-lived assets, including property and equipment and intangible assets with finite lives, are evaluated for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. If the sum of the expected future undiscounted cash flows is less than the carrying amount of the asset, an impairment loss is recognized in the amount that the carrying amount of the asset exceeds its fair value. Fair value is determined based on discounted future net cash flows associated with the use of the asset.

Fair Value of Financial Instruments

The Company’s financial instruments consist of cash, accounts receivable, accounts payable, accrued expenses, lines of credit, shareholder notes payable, and long-term debt. The carrying values of all the Company’s financial instruments approximate fair value because of their short maturities. In addition to the short maturities, the carrying amounts of our line of credit and shareholder notes payable approximate fair value because the interest rates at December 31, 2016 and 2015 approximate market interest rates for the respective borrowings.

In specific circumstances, certain assets and liabilities are reported or disclosed at fair value. Fair value is the exit price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date in the Company’s principal market for such transactions. If there is not an established principal market, fair value is derived from the most advantageous market.

Valuation inputs are classified in the following hierarchy:

Highest priority is given to Level 1 inputs and the lowest priority to Level 3 inputs. Acceptable valuation techniques include the market approach, income approach, and cost approach. In some cases, more than one valuation technique is used.

Income Taxes

Vystar recognizes income taxes on an accrual basis based on a tax position taken or expected to be taken in its tax returns. A tax position is defined as a position in a previously filed tax return or a position expected to be taken in a future tax filing that is reflected in measuring current or deferred income tax assets or liabilities. Tax positions are recognized only when it is more likely than not (i.e., likelihood of greater than 50%), based on technical merits, that the position would be sustained upon examination by taxing authorities. Tax positions that meet the more likely than not threshold are measured using a probability-weighted approach as the largest amount of tax benefit that is greater than 50% likely of being realized upon settlement. Income taxes are accounted for using an asset and liability approach that requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been recognized in our financial statements or tax returns. A valuation allowance is established to reduce deferred tax assets if all, or some portion, of such assets will more likely than not be realized. A valuation allowance for the full amount of the net deferred tax asset was recorded for the years ended December 31, 2016 and 2015. Should they occur, interest and penalties related to tax positions are recorded as interest expense. No such interest or penalties have been incurred as of December 31, 2016 and 2015. The Company is no longer subject to federal examination for years prior to 2011.

Loss Per Share

The Company presents basic and diluted loss per share. Because the Company reported a net loss in 2016 and 2015, common stock equivalents, including stock options and warrants, were anti-dilutive; therefore, the amounts reported for basic and dilutive loss per share were the same. Excluded from the computation of diluted loss per share were options to purchase 9,418,271 and 9,381,573 shares of common stock for 2016 and 2015, respectively, as their effect would be anti-dilutive. Warrants to purchase 16,122,332 and 17,551,784 shares of common stock for 2016 and 2015, respectively, were also excluded from the computation of diluted loss per share as their effect would be anti-dilutive. In addition, preferred stock convertible to 3,761,417 and 3,484,100 shares of common stock for 2016 and 2015, respectively, were excluded from the computation of diluted loss per share as their effect would be anti-dilutive.

Revenue

The Vytex segment derives revenue from sales of or license fees of Vytex NRL raw material to manufacturers and distributors of rubber and rubber end products. Under both the direct and licensing agreement sales, the Vytex segment recognizes revenue at the time product is shipped and title passes to the customer. Revenue is recognized when the following four criteria are met: (1) persuasive evidence of an arrangement exists; (2) shipment or delivery has occurred; (3) the price is fixed or determinable and (4) collectability is reasonably assured.

Cost of Revenue

For Vytex, cost of revenue consists primarily of product and freight costs.

Research and Development

Research and development costs are expensed when incurred. Research and development costs include all costs incurred related to the research, development and testing of the Company’s process to produce Vytex NRL.

Recent Accounting Pronouncements

In May 2014, the FASB issued Accounting Standards Update (“ASU”) No. 2014-09, Revenue from Contracts with Customers, a new standard on revenue recognition. The new standard will supersede existing revenue recognition guidance and apply to all entities that enter into contracts to provide goods or services to customers. The guidance also addresses the measurement and recognition of gains and losses on the sale of certain non-financial assets, such as real estate, property and equipment. In August 2015, the FASB issued ASU No. 2015-14, Revenue from Contracts with Customers: Deferral of the Effective Date, which defers the effective date of the guidance in ASU 2014-09 by one year. This update is now effective for annual and interim period beginning after December 15, 2017, which will require us to adopt these provisions in the first quarter of fiscal year 2018. Early application is permitted for annual reporting periods beginning after December 15, 2016, including interim reporting periods within that reporting period. This update permits the use of either the retrospective or cumulative effect transition method. The Company is currently assessing the impact that this guidance will have on its financial statements. In February 2016, the FASB issued ASU 2016-02, Leases. ASU 2016-02 requires lessees to recognize the assets and liabilities on their balance sheet for the rights and obligations created by most leases and continue to recognize expenses on their income statements over the lease term. It will also require disclosures designed to give financial statement users information on the amount, timing, and uncertainty of cash flows arising from leases. The guidance is effective for annual reporting periods beginning after December 15, 2018, and interim periods within those years. Early adoption is permitted. The Company is currently assessing the impact that this guidance will have on its financial statements.

In August 2016, the FASB issued ASU No. 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Receipts and Cash Payments. This update addresses eight specific cash flow issues with the objective of reducing the existing diversity in practice in how certain receipts and cash payments are presented and classified in the statement of cash flows. The new standard is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2017. The Company is currently assessing the impact that this guidance will have on its financial statements.

NOTE 2 – LIQUIDITY AND GOING CONCERN

The Company’s financial statements are prepared using the accrual method of accounting in accordance with accounting principles generally accepted in the United States of America and have been prepared on a going concern basis, which contemplates the realization of assets and the settlement of liabilities in the normal course of business. However, we have incurred significant losses and experienced negative cash flow since inception. At December 31, 2016, the Company had cash of approximately $36,282 and a deficit in working capital of $2,723,541. For the year ended December 31, 2016, the Company had a net loss of $1,221,298 and an accumulated deficit of $26,814,649. For the year ended December 31, 2015, the Company had a net loss of $1,238,878 and the accumulated deficit amounted to $25,593,351. We use working capital to finance our ongoing operations and since those operations do not currently cover all of our operating costs, managing working capital is essential to our Company’s future success.

Net cash used in operating activities was $907,441 for the year ended December 31, 2016 as compared to $656,829 for the year ended December 31, 2015. During the year ended December 31, 2016, cash used in operations was primarily due to the net loss for the year of $1,221,298 net of non-cash related add-back of share-based compensation expense of $242,159.

Net cash provided by investing activities was $2,701 during the year ended December 31, 2016 as this was a result of selling some equipment. During the year ended December 31, 2015, $281 was the result of selling some equipment as well.

Net cash provided by financing activities was $911,963 during the year ended December 31, 2016, as compared to cash provided of $611,837 during the year ended December 31, 2015. During 2016 cash was provided from the issuance of common stock in the amount of $723,456. $53,500 in cash was provided by the exercise of common stock warrants and options and $135,000 in proceeds from Shareholder Notes. In 2015, the cash provided was exclusively from the issuance of common stock.

As discussed in detail in Note 5, the CMA Note matured on April 29, 2013, and has been extended through April 29, 2016. The note is currently due on demand. All the Shareholder Notes which matured on various dates from March 11 through May 31, 2013 were either converted to preferred stock or had their maturity dates extended or Vystar management is working with the holders of the Shareholder Notes to extend the maturity dates until 2018.

A successful transition to attaining profitable operations is dependent upon obtaining sufficient financing to fund the Company’s planned expenses and achieving a level of revenue adequate to support the Company’s cost structure. Management plans to finance future operations through the use of cash on hand, increased revenue from Vytex division license fees, stock warrant exercises from existing shareholders, and raising capital through private placement memoranda (see Note 15, Subsequent Events).

As a result of this history of losses and financial condition, there is substantial doubt about the Company’s ability to continue as a going concern.

There can be no assurances that the Company will be able to achieve projected levels of revenue in 2017 and beyond. If the Company is not able to achieve projected revenue and obtain alternate additional financing of equity or debt, the Company would need to significantly curtail or reorient operations during 2017, which could have a material adverse effect on the ability to achieve the business objectives and as a result may require the Company to file for bankruptcy or cease operations. The financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or amounts classified as liabilities that might be necessary should the Company be forced to take any such actions.

The Company’s future expenditures will depend on numerous factors, including: the rate at which the Company can introduce and license Vytex NRL to manufacturers; the costs of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights; and market acceptance of the Company’s products and services and competing technological developments. As the Company expands our activities and operations, cash requirements are expected to increase at a rate consistent with revenue growth after the Company has achieved sustained revenue generation.

NOTE 3 – PROPERTY AND EQUIPMENT

Property and equipment consisted of the following at December 31:

Depreciation expense for the years ended December 31, 2016 and 2015 was $278 and $1,608, respectively.

NOTE 4 – INTANGIBLE ASSETS

Intangible assets were as follows at December 31:

Amortization expense for the years ended December 31, 2016 and 2015 was $15,861.

Estimated future amortization expense for finite-lived intangible assets is as follows: