COMFORT SYSTEMS USA INC - Quarter Report: 2013 June (Form 10-Q)

Use these links to rapidly review the document
TABLE OF CONTENTS

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-Q

Commission file number: 1-13011

COMFORT SYSTEMS USA, INC.
(Exact name of registrant as specified in its charter)

675 Bering Drive
Suite 400
Houston, Texas 77057
(Address of Principal Executive Offices) (Zip Code)

Registrant's telephone number, including area code: (713) 830-9600

        Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

        Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý    No o

        Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company (as defined in Rule 12b-2 of the Exchange Act).

        Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2). Yes o    No ý

        The number of shares outstanding of the issuer's common stock as of July 23, 2013 was 37,327,193 (excluding treasury shares of 3,796,172).

Table of Contents

COMFORT SYSTEMS USA, INC.
INDEX TO FORM 10-Q
FOR THE QUARTER ENDED JUNE 30, 2013

Table of Contents

COMFORT SYSTEMS USA, INC.

CONSOLIDATED BALANCE SHEETS

(In Thousands, Except Share Amounts)

The accompanying notes are an integral part of these consolidated financial statements.

1

Table of Contents

COMFORT SYSTEMS USA, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(In Thousands, Except Per Share Data)

(Unaudited)

The accompanying notes are an integral part of these consolidated financial statements.

2

Table of Contents

COMFORT SYSTEMS USA, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY

(In Thousands, Except Share Amounts)

The accompanying notes are an integral part of these consolidated financial statements.

3

Table of Contents

COMFORT SYSTEMS USA, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In Thousands)

(Unaudited)

The accompanying notes are an integral part of these consolidated financial statements.

4

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

June 30, 2013

(Unaudited)

1. Business and Organization

        Comfort Systems USA, Inc., a Delaware corporation, provides comprehensive heating, ventilation and air conditioning ("HVAC") installation, maintenance, repair and replacement services within the mechanical services industry. We operate primarily in the commercial, industrial and institutional HVAC markets and perform most of our services within office buildings, retail centers, apartment complexes, manufacturing plants and healthcare, education and government facilities. In addition to standard HVAC services, we provide specialized applications such as building automation control systems, fire protection, process cooling, electronic monitoring and process piping. Certain locations also perform related activities such as electrical service and plumbing. Approximately 44% of our consolidated 2013 revenue is attributable to installation of systems in newly constructed facilities, with the remaining 56% attributable to maintenance, repair and replacement services. The following service activities account for our consolidated 2013 revenue: HVAC 75%, plumbing 15%, building automation control systems 6% and other 4%. These service activities are within the mechanical services industry which is the single industry segment we serve.

2. Summary of Significant Accounting Policies

Basis of Presentation

        These interim statements should be read in conjunction with the historical consolidated financial statements and related notes of Comfort Systems included in the Annual Report on Form 10-K as filed with the Securities and Exchange Commission ("SEC") for the year ended December 31, 2012 (the "Form 10-K").

        The accompanying unaudited consolidated financial statements were prepared using generally accepted accounting principles for interim financial information and the instructions to Form 10-Q and applicable rules of Regulation S-X of the SEC. Accordingly, these financial statements do not include all the footnotes required by generally accepted accounting principles for complete financial statements and should be read in conjunction with the Form 10-K. We believe all adjustments necessary for a fair presentation of these interim statements have been included and are of a normal and recurring nature. The results of operations for interim periods are not necessarily indicative of the results for the full fiscal year.

Use of Estimates

        The preparation of financial statements in conformity with generally accepted accounting principles requires the use of estimates and assumptions by management in determining the reported amounts of assets and liabilities, revenue and expenses and disclosures regarding contingent assets and liabilities. Actual results could differ from those estimates. The most significant estimates used in our financial statements affect revenue and cost recognition for construction contracts, the allowance for doubtful accounts, self-insurance accruals, deferred tax assets, warranty accruals, fair value accounting for acquisitions and the quantification of fair value for reporting units in connection with our goodwill impairment testing.

5

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

2. Summary of Significant Accounting Policies (Continued)

Cash Flow Information

        We consider all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents.

        Cash paid (in thousands) for:

Income Taxes

        We are subject to income tax in the United States and Puerto Rico and we file a consolidated return for federal income tax purposes. Income taxes are provided for under the liability method, which takes into account differences between financial statement treatment and tax treatment of certain transactions.

        Deferred income taxes are based on the difference between the financial reporting and tax basis of assets and liabilities. The deferred income tax provision represents the change during the reporting period in the deferred tax assets and deferred tax liabilities, net of the effect of acquisitions and dispositions. Deferred tax assets include tax loss and credit carry-forwards and are reduced by a valuation allowance if, based on available evidence, it is more likely than not that some portion or all of the deferred tax assets will not be realized.

        We regularly evaluate valuation allowances established for deferred tax assets for which future realization is uncertain. We perform this evaluation each quarter. Estimations of required valuation allowances include estimates of future taxable income. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which the activity underlying these assets becomes deductible. We consider projected future taxable income and tax planning strategies in making this assessment. If actual future taxable income is less than the estimates, we may not realize all or a portion of the recorded deferred tax assets.

        Significant judgment is required in assessing the timing and amounts of deductible and taxable items. We establish reserves when, despite our belief that our tax return positions are fully supportable, we believe that certain positions may be challenged and potentially disallowed. When facts and circumstances change, we adjust these reserves through our provision for income taxes.

        To the extent interest and penalties may be assessed by taxing authorities on any underpayment of income tax, such amounts have been accrued and are classified as a component of income tax expense in our consolidated statements of operations.

6

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

2. Summary of Significant Accounting Policies (Continued)

        For the six months ended June 30, 2013 our tax expense is $7.8 million with an effective tax rate of 41.3% as compared to tax expense of $2.1 million with an effective tax rate of 58.1% for the six months ended June 30, 2012. The effective rate for 2013 is higher than the federal statutory rate primarily due to the impact of the variability of rates and results among local jurisdictions. The effective tax rate in 2012 was higher than the federal statutory rate primarily due to the impact of increases in tax reserves. Tax reserves are analyzed and adjusted quarterly as events occur to warrant such changes. Adjustments to tax reserves are a component of the effective tax rate.

Financial Instruments

        Our financial instruments consist of cash and cash equivalents, accounts receivable, other receivables, accounts payable, notes to former owners and a revolving credit facility. We believe that the carrying values of these instruments on the accompanying balance sheets approximate their fair values.

Segment Disclosure

        Our activities are within the mechanical services industry which is the single industry segment we serve. Each operating subsidiary represents an operating segment and these segments have been aggregated, as the operating units meet all of the aggregation criteria.

Reclassifications

        Certain reclassifications have been made in prior period financial statements to conform to current period presentation. These reclassifications are of a normal and recurring nature or are due to discontinued operations accounting related to the shutdown of our Delaware operation in 2012. Neither have resulted in any changes to previously reported net income for any periods.

3. Fair Value Measurements

        We classify and disclose assets and liabilities carried at fair value in one of the following three categories:

•

Level 1—quoted prices in active markets for identical assets and liabilities;



•

Level 2—observable market based inputs or unobservable inputs that are corroborated by market data; and



•

Level 3—significant unobservable inputs in which little or no market data exists, therefore requiring an entity to develop its own assumptions.

7

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

3. Fair Value Measurements (Continued)

        The following table summarizes the fair values and levels within the fair value hierarchy in which the fair value measurements fall for assets and liabilities measured on a recurring basis as of June 30, 2013 (in thousands):

        Cash and cash equivalents consist primarily of highly rated money market funds at a variety of well-known institutions with original maturities of three months or less. The original cost of these assets approximates fair value due to their short term maturity.

        One of our operations has life insurance policies covering 39 employees with a combined face value of $40.5 million. The policy is invested in mutual funds and the fair value measurement is determined using Level 2 inputs within the fair value hierarchy and will vary with investment performance. The cash surrender value of these policies is $2.6 million as of June 30, 2013 and $2.5 million as of December 31, 2012, respectively. These assets are included in "Other Noncurrent Assets" in our consolidated balance sheets.

        The valuation of the Company's contingent earn-out obligations is determined using a probability weighted discounted cash flow method. This fair value measurement is based on significant unobservable inputs in the market and thus represents a Level 3 measurement within the fair value hierarchy. This analysis reflects the contractual terms of the purchase agreements (e.g., minimum and maximum payments, length of earn-out periods, manner of calculating any amounts due, etc.) and utilizes assumptions with regard to future cash flows, probabilities of achieving such future cash flows and a discount rate. The contingent earn-out obligations are measured at fair value each reporting period and changes in estimates of fair value are recognized in earnings.

        The table below presents a reconciliation of the fair value of our contingent earn-out obligations that use significant unobservable inputs (Level 3) (in thousands).

        We measure certain assets at fair value on a nonrecurring basis. These assets are recognized at fair value when they are deemed to be other-than-temporarily impaired. We did not recognize any impairments, in the current quarter, on those assets required to be measured at fair value on a nonrecurring basis.

8

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

4. Acquisitions

        No acquisitions were completed in the first six months of 2013. We completed one acquisition in the first quarter and one in the second quarter of 2012. These acquisitions were not material, individually or in the aggregate, and were "tucked-in" with existing operations. The results of operations of acquisitions are included in our consolidated financial statements from their respective acquisition dates. Additional contingent purchase price ("earn-out") has been or will be paid if certain acquisitions achieve predetermined profitability targets.

5. Discontinued Operations

        During the fourth quarter of 2012, we substantially completed the shutdown of our operation located in Delaware. Discontinued operations were breakeven for the three months ended June 30, 2013. The after tax loss for the six months ended June 30, 2013 was $0.1 million. The after tax income for the three months ended June 30, 2012 was $0.1 million while the after tax loss for the six months ended June 30, 2012 was $0.1 million. These results have been recorded in discontinued operations under "Income (loss) from discontinued operations, net of income tax expense (benefit)".

        Our consolidated statements of operations and the related earnings per share amounts have been restated to reflect the effects of the discontinued operations. No interest expense is allocated to discontinued operations.

        Revenue and pre-tax income (loss) related to discontinued operations are as follows (in thousands):

6. Goodwill and Identifiable Intangible Assets, Net

Goodwill

        The changes in the carrying amount of goodwill are as follows (in thousands):

9

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

6. Goodwill and Identifiable Intangible Assets, Net (Continued)

Identifiable Intangible Assets, Net

        Identifiable intangible assets consist of the following (dollars in thousands):

7. Long-Term Debt Obligations

        Long-term debt obligations consist of the following (in thousands):

Revolving Credit Facility

        On June 25, 2013, we amended our senior credit facility (the "Facility") provided by a syndicate of banks increasing our borrowing capacity from $125.0 million to $175.0 million. The Facility, which is available for borrowings and letters of credit, now expires in July 2018 and is secured by a first lien on substantially all of the Company's personal property except for assets related to projects subject to surety bonds and assets held by certain unrestricted subsidiaries and a second lien on the Company's assets related to projects subject to surety bonds. We incurred approximately $0.6 million in financing and professional costs in connection with the amendment to the Facility, which combined with the previous unamortized costs of $0.7 million, will be amortized on a straight-line basis as a non-cash charge to interest expense over the remaining term of the Facility. As of June 30, 2013, we had no outstanding borrowings, $53.2 million in letters of credit outstanding and $121.8 million of credit available.

        There are two interest rate options for borrowings under the Facility, the Base Rate Loan Option and the Eurodollar Rate Loan Option. These rates are floating rates determined by the broad financial

10

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

7. Long-Term Debt Obligations (Continued)

markets, meaning they can and do move up and down from time to time. Additional margins are then added to these two rates.

        The following is a summary of the additional margins:

        We estimate that the weighted average interest rate applicable to borrowings under the Facility would be approximately 1.7% as of June 30, 2013.

        We have used letters of credit to guarantee performance under our contracts and to ensure payment to our subcontractors and vendors under those contracts. Our lenders issue such letters of credit through the Facility for a fee. We have never had a claim made against a letter of credit that resulted in payments by a lender or by us and believe such claims are unlikely in the foreseeable future. The letter of credit fees range from 1.25% to 2.00% per annum, based on the ratio of Consolidated Total Indebtedness to Credit Facility Adjusted EBITDA, as defined in the credit agreement.

        Commitment fees are payable on the portion of the revolving loan capacity not in use for borrowings or letters of credit at any given time. These fees range from 0.20% to 0.35% per annum, based on the ratio of Consolidated Total Indebtedness to Credit Facility Adjusted EBITDA, as defined in the credit agreement.

        The Facility contains financial covenants defining various financial measures and the levels of these measures with which we must comply. Covenant compliance is assessed as of each quarter end.

        The Facility's principal financial covenants include:

        Leverage Ratio—The Facility requires that the ratio of our Consolidated Total Indebtedness to our Credit Facility Adjusted EBITDA not exceed 3.00 through December 31, 2014, 2.75 through December 31, 2015 and 2.50 through maturity. The leverage ratio as of June 30, 2013 was 0.09.

        Fixed Charge Coverage Ratio—The Facility requires that the ratio of Credit Facility Adjusted EBITDA, less non-financed capital expenditures, tax provision, dividends and amounts used to repurchase stock to the sum of interest expense and scheduled principal payments of indebtedness be at least 2.00; provided that the calculation of the fixed charge coverage ratio excludes stock repurchases and the payment of dividends at any time that the Company's Net Leverage Ratio does not exceed 1.50. The Facility also allows the fixed charge coverage ratio not to be reduced for stock repurchases through June 30, 2015 in an aggregate amount not to exceed $25 million if at the time of and after giving effect to such repurchase the Company's Net Leverage Ratio was less than or equal to 1.50. Capital expenditures, tax provision, dividends and stock repurchase payments are defined under the Facility for purposes of this covenant to be amounts for the four quarters ending as of any given

11

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

7. Long-Term Debt Obligations (Continued)

quarterly covenant compliance measurement date. The fixed charge coverage ratio as of June 30, 2013 was 21.37.

        Other Restrictions—The Facility permits acquisitions of up to $20.0 million per transaction, provided that the aggregate purchase price of such an acquisition and of acquisitions in the same fiscal year does not exceed $50.0 million. However, these limitations only apply when the Company's Net Leverage Ratio is equal to or greater than 2.00.

        While the Facility's financial covenants do not specifically govern capacity under the Facility, if our debt level under the Facility at a quarter-end covenant compliance measurement date were to cause us to violate the Facility's leverage ratio covenant, our borrowing capacity under the Facility and the favorable terms that we currently have could be negatively impacted by the lenders.

        We are in compliance with all of our financial covenants as of June 30, 2013.

Notes to Former Owners

        We issued subordinated notes to the former owners of acquired companies as part of the consideration used to acquire these companies. These notes had an outstanding balance of $3.0 million as of June 30, 2013 and bear interest, payable annually, at a weighted average interest rate of 3.3%. The maturity date of the outstanding balance is July 2014. In July 2013, we paid $1.0 million of this outstanding balance.

Other Debt

        In conjunction with our acquisition of ColonialWebb in 2010, we acquired long-term debt related to an industrial revenue bond associated with its office building and warehouse. The outstanding balance as of June 30, 2013 was $2.4 million, of which $0.3 million is current. The weighted average interest rate on this variable rate debt as of June 30, 2013 was approximately 0.30%. In July 2013, we paid the outstanding balance of $2.4 million.

        In addition, our majority owned subsidiary, EAS, has a revolving $2.5 million credit line that is available for temporary working capital needs and expires June 30, 2014. As of June 30, 2013, we had no outstanding borrowings and, therefore, $2.5 million of credit available. We estimate that the weighted average interest rate applicable to borrowings under this variable rate credit line would be approximately 2.7% as of June 30, 2013.

8. Commitments and Contingencies

Claims and Lawsuits

        We are subject to certain legal and regulatory claims, including lawsuits arising in the normal course of business. We maintain various insurance coverages to minimize financial risk associated with these claims. We have estimated and provided accruals for probable losses and related legal fees associated with certain litigation in the accompanying consolidated financial statements. While we cannot predict the outcome of these proceedings, in management's opinion and based on reports of

12

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

8. Commitments and Contingencies (Continued)

counsel, any liability arising from these matters individually and in the aggregate will not have a material effect on our operating results or financial condition, after giving effect to provisions already recorded.

Surety

        Many customers, particularly in connection with new construction, require us to post performance and payment bonds issued by a financial institution known as a surety. If we fail to perform under the terms of a contract or to pay subcontractors and vendors who provided goods or services under a contract, the customer may demand that the surety make payments or provide services under the bond. We must reimburse the surety for any expenses or outlays it incurs. To date, we are not aware of any losses to our sureties in connection with bonds the sureties have posted on our behalf, and do not expect such losses to be incurred in the foreseeable future.

        Surety market conditions remain challenging as a result of significant losses incurred by many sureties in recent periods, both in the construction industry as well as in certain larger corporate bankruptcies. As a result, less bonding capacity is available in the market and terms have become more restrictive. Further, under standard terms in the surety market, sureties issue bonds on a project-by-project basis, and can decline to issue bonds at any time. Historically, approximately 25% to 35% of our business has required bonds. While we have strong surety relationships to support our bonding needs, current market conditions as well as changes in the sureties' assessment of our operating and financial risk could cause the sureties to decline to issue bonds for our work. If that were to occur, the alternatives include doing more business that does not require bonds, posting other forms of collateral for project performance such as letters of credit or cash, and seeking bonding capacity from other sureties. We would likely also encounter concerns from customers, suppliers and other market participants as to our creditworthiness. While we believe our general operating and financial characteristics, including a significant amount of cash on our balance sheet, would enable us to ultimately respond effectively to an interruption in the availability of bonding capacity, such an interruption would likely cause our revenue and profits to decline in the near term.

Self-Insurance

        We are substantially self-insured for workers' compensation, employer's liability, auto liability, general liability and employee group health claims, in view of the relatively high per-incident deductibles we absorb under our insurance arrangements for these risks. Losses up to deductible amounts are estimated and accrued based upon known facts, historical trends and industry averages. Loss estimates associated with the larger and longer-developing risks, such as workers' compensation, auto liability and general liability, are reviewed by a third-party actuary quarterly.

13

Table of Contents

COMFORT SYSTEMS USA, INC.

CONDENSED NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

June 30, 2013

(Unaudited)

9. Stockholders' Equity

Earnings Per Share

        Basic earnings per share ("EPS") is computed by dividing net income by the weighted average number of shares of common stock outstanding during the period. Diluted EPS is computed considering the dilutive effect of stock options, contingently issuable restricted stock and restricted stock units.

        There were approximately 0.3 million and 1.0 million of anti-dilutive stock options excluded from the calculation of diluted EPS for the three months ended June 30, 2013 and 2012, respectively. There were approximately 0.4 million and 1.0 million of anti-dilutive stock options excluded from the calculation of diluted EPS for the six months ended June 30, 2013 and 2012, respectively.

        The following table reconciles the number of shares outstanding with the number of shares used in computing basic and diluted earnings per share for each of the periods presented (in thousands):

Share Repurchase Program

        On March 29, 2007, our Board of Directors (the "Board") approved a stock repurchase program to acquire up to 1.0 million shares of our outstanding common stock. Subsequently, the Board has from time to time approved extensions of the program to acquire additional shares. Since the inception of the repurchase program, the Board has approved 6.6 million shares to be repurchased.

        The share repurchases will be made from time to time at our discretion in the open market or privately negotiated transactions as permitted by securities laws and other legal requirements, and subject to market conditions and other factors. The Board may modify, suspend, extend or terminate the program at any time. We repurchased less than 0.1 million shares during the six months ended June 30, 2013 at an average price of $13.11 per share. Since the inception of the program in 2007 and as of June 30, 2013, we have repurchased a cumulative total of 5.9 million shares at an average price of $10.95 per share.

14

Table of Contents

Item 2.    Management's Discussion and Analysis of Financial Condition and Results of Operations

        The following discussion should be read in conjunction with our historical Consolidated Financial Statements and related notes included elsewhere in this Form 10-Q and the Annual Report on Form 10-K filed with the Securities and Exchange Commission for the year ended December 31, 2012 (the "Form 10-K"). This discussion contains "forward-looking statements" regarding our business and industry within the meaning of the Private Securities Litigation Reform Act of 1995. These statements are based on our current plans and expectations and involve risks and uncertainties that could cause our actual future activities and results of operations to be materially different from those set forth in the forward-looking statements. Important factors that could cause actual results to differ include risks set forth in "Item 1A. Risk Factors" included in our Form 10-K. The terms "Comfort Systems," "we," "us," or "the Company," refer to Comfort Systems USA, Inc. or Comfort Systems USA, Inc. and its consolidated subsidiaries, as appropriate in the context.

Introduction and Overview

        We are a national provider of comprehensive HVAC installation, maintenance, repair and replacement services within the mechanical services industry. We operate primarily in the commercial, industrial and institutional HVAC markets and perform most of our services within office buildings, retail centers, apartment complexes, manufacturing plants and healthcare, education and government facilities. In addition to standard HVAC services, we provide specialized applications such as building automation control systems, fire protection, process cooling, electronic monitoring and process piping. Certain locations also perform related activities such as electrical service and plumbing.

Nature and Economics of Our Business

        Approximately 84% of our revenue is earned on a project basis for installation of HVAC systems in newly constructed facilities or for replacement of HVAC systems in existing facilities. Customers hire us to ensure such systems deliver specified or generally expected heating, cooling, conditioning and circulation of air in a facility. This entails installing core system equipment such as packaged heating and air conditioning units, or in the case of larger facilities, separate core components such as chillers, boilers, air handlers and cooling towers. We also typically install connecting and distribution elements such as piping and ducting. Our responsibilities usually require conforming the systems to pre-established engineering drawings and equipment and performance specifications, which we frequently participate in establishing. Our project management responsibilities include staging equipment and materials to project sites, deploying labor to perform the work and coordinating with other service providers on the project, including any subcontractors we might use to deliver our portion of the work.

        When competing for project business, we usually estimate the costs we will incur on a project, and then propose a bid to the customer that includes a contract price and other performance and payment terms. Our bid price and terms are intended to cover our estimated costs on the project and provide a profit margin to us commensurate with the value of the installed system to the customer, the risk that project costs or duration will vary from estimate, the schedule on which we will be paid, the opportunities for other work that we might forego by committing capacity to this project, and other costs that we incur more broadly to support our operations but which are not specific to the project. Typically customers will seek bids from competitors for a given project. While the criteria on which customers select the winning bid vary widely and include factors such as quality, technical expertise, on-time performance, post-project support and service, and company history and financial strength, we believe that price is the most influential factor for most customers in choosing an HVAC installation and service provider.

15

Table of Contents

        After a customer accepts our bid, we generally enter into a contract with the customer that specifies what we will deliver on the project, what our related responsibilities are, and how much and when we will be paid. Our overall price for the project is typically set at a fixed amount in the contract, although changes in project specifications or work conditions that result in unexpected additional work are usually subject to additional payment from the customer via what are commonly known as change orders. Project contracts typically provide for periodic billings to the customer as we meet progress milestones or incur cost on the project. Project contracts in our industry also frequently allow for a small portion of progress billings or contract price to be withheld by the customer until after we have completed the work, typically for six months. Amounts withheld under this practice are known as retention or retainage.

        Labor and overhead costs account for the majority of our cost of service. Accordingly, labor management and utilization have the most impact on our project performance. Given the fixed price nature of much of our project work, if our initial estimate of project costs is wrong or we incur cost overruns that cannot be recovered in change orders, we can experience reduced profits or even significant losses on fixed price project work. We also perform some project work on a cost-plus or a time and materials basis, under which we are paid our costs incurred plus an agreed-upon profit margin. These margins are typically less than fixed-price contract margins because there is less risk of unrecoverable cost overruns in cost-plus or time and materials work.

        Our average project takes six to nine months to complete, with an average contract price of approximately $431,000. We also perform larger HVAC projects. Generally, projects closer in size to $1 million will be completed in one year or less. It is unusual for us to work on a project that exceeds two years in length. Our projects generally require working capital funding of equipment and labor costs. Customer payments on periodic billings generally do not recover these costs until late in the job. Our average project duration together with typical retention terms as discussed above generally allow us to complete the realization of revenue and earnings in cash within one year. We have what we believe is a well-diversified distribution of revenue across end-use sectors that we believe reduces our exposure to negative developments in any given sector. Because of the integral nature of HVAC and related controls systems to most buildings, we have the legal right in almost all cases to attach liens to buildings or related funding sources when we have not been fully paid for installing systems, except with respect to some government buildings. The service work that we do, which is discussed further below, usually does not give rise to lien rights.

        A stratification of projects in progress as of June 30, 2013, by contract price, is as follows:

        In addition to project work, approximately 16% of our revenue represents maintenance and repair service on already-installed HVAC and controls systems. This kind of work usually takes from a few hours to a few days to perform. Prices to the customer are usually based on the equipment and materials used in the service as well as technician labor time. We usually bill the customer for service work when it is complete, typically with payment terms of up to thirty days. We also provide maintenance and repair service under ongoing contracts. Under these contracts, we are paid regular monthly or quarterly amounts and provide specified service based on customer requirements. These

16

Table of Contents

agreements typically cover periods ranging from one to three years with thirty- to sixty-day cancellation notice periods.

        A relatively small portion of our revenue comes from national and regional account customers. These customers typically have multiple sites, and contract with us to perform maintenance and repair service. These contracts may also provide for us to perform new or replacement systems installation. We operate a national call center to dispatch technicians to sites requiring service. We perform the majority of this work with our own employees, with the balance being subcontracted to third parties that meet our performance qualifications. We will also typically use proprietary information systems to maintain information on the customer's sites and equipment, including performance and service records, and related cost data. These systems track the status of ongoing service and installation work, and may also monitor system performance data. Under these contractual relationships, we usually provide consolidated billing and credit payment terms to the customer.

Profile and Management of Our Operations

        We manage our 36 operating units based on a variety of factors. Financial measures we emphasize include profitability, and use of capital as indicated by cash flow and by other measures of working capital principally involving project cost, billings and receivables. We also monitor selling, general, administrative and indirect project support expense, backlog, workforce size and mix, growth in revenue and profits, variation of actual project cost from original estimate, and overall financial performance in comparison to budget and updated forecasts. Operational factors we emphasize include project selection, estimating, pricing, management and execution practices, labor utilization, safety, training, and the make-up of both existing backlog as well as new business being pursued, in terms of project size, technical application and facility type, end-use customers and industries, and location of the work.

        Most of our operations compete on a local or regional basis. Attracting and retaining effective operating unit managers is an important factor in our business, particularly in view of the relative uniqueness of each market and operation, the importance of relationships with customers and other market participants such as architects and consulting engineers, and the high degree of competition and low barriers to entry in most of our markets. Accordingly, we devote considerable attention to operating unit management quality, stability and contingency planning, including related considerations of compensation, and non-competition protection where applicable.

Economic and Industry Factors

        As an HVAC and building controls services provider, we operate in the broader nonresidential construction services industry and are affected by trends in this sector. While we do not have operations in all major cities of the United States, we believe our national presence is sufficiently large that we experience trends in demand for and pricing of our services that are consistent with trends in the national nonresidential construction sector. As a result, we monitor the views of major construction sector forecasters along with macroeconomic factors they believe drive the sector, including trends in gross domestic product, interest rates, business investment, employment, demographics and the general fiscal condition of federal, state and local governments.

        Spending decisions for building construction, renovation and system replacement are generally made on a project basis, usually with some degree of discretion as to when and if projects proceed. With larger amounts of capital, time and discretion involved, spending decisions are affected to a significant degree by uncertainty, particularly concerns about economic and financial conditions and trends. We have experienced periods of time when economic weakness caused a significant slowdown in decisions to proceed with installation and replacement project work.

17

Table of Contents

Operating Environment and Management Emphasis

        Nonresidential building construction and renovation activity, as reported by the federal government, declined over the three year period of 2001 to 2003, expanded moderately during 2004 and 2005, and was strong over the three year period from 2006 to 2008. We experienced significant industry activity declines over the four year period from 2009 to 2012, which have continued in 2013. During the periods of decline, we responded to market challenges by pursuing work in sectors less affected by the downturn, such as government, educational and healthcare facilities, and by establishing marketing initiatives that take advantage of our size and range of expertise. We also responded to declining gross profits over those years by reducing our selling, general and administrative expenses, and our indirect project and service overhead costs. We believe our efforts in these areas partially offset the decline in our profitability over that period.

        As a result of our continued strong emphasis on cash flow, our debt outstanding under our revolving credit facility is zero, and we have substantial uncommitted cash balances, as discussed further in "Liquidity and Capital Resources" below. We have a credit facility in place with considerably less restrictive terms than those of our previous facilities; this facility does not expire until July 2018. We have strong surety relationships to support our bonding needs, and we believe our relationships with the surety markets are positive in light of our strong current results and financial position. We have generated positive free cash flow in each of the last fourteen calendar years and will continue our emphasis in this area. We believe that the relative size and strength of our balance sheet and surety support as compared to most companies in our industry represent competitive advantages for us.

        As discussed at greater length in "Results of Operations" below, we have seen declining activity levels in our industry since late 2008 and we expect price competition to continue to be strong, as local and regional competitors respond cautiously to changing conditions. We will continue our efforts to find the more active sectors in our markets, and to increase our regional and national account business. Our primary emphasis for the remainder of 2013 will be on execution and cost control, and on maintaining activity levels that will permit us to earn reasonable profits while preserving our core workforce. We have increased our focus on project qualification, estimating, pricing and management, and on service performance.

Cyclicality and Seasonality

        Historically, the construction industry has been highly cyclical. As a result, our volume of business may be adversely affected by declines in new installation and replacement projects in various geographic regions of the United States during periods of economic weakness.

        The HVAC industry is subject to seasonal variations. Specifically, the demand for new installation and replacement is generally lower during the winter months (the first quarter of the year) due to reduced construction activity during inclement weather and less use of air conditioning during the colder months. Demand for HVAC services is generally higher in the second and third calendar quarters due to increased construction activity and increased use of air conditioning during the warmer months. Accordingly, we expect our revenue and operating results generally will be lower in the first and fourth calendar quarters.

Critical Accounting Policies

        Our critical accounting policies are based upon the significance of the accounting policy to our overall financial statement presentation, as well as the complexity of the accounting policy and our use of estimates and subjective assessments. Our most critical accounting policy is revenue recognition. As discussed elsewhere in this quarterly report on Form 10-Q, our business has two service functions: (i) installation, which we account for under the percentage of completion method, and (ii) maintenance, repair and replacement, which we account for as the services are performed, or in the

18

Table of Contents

case of replacement, under the percentage of completion method. In addition, we identified other critical accounting policies related to our allowance for doubtful accounts receivable, the recording of our self-insurance liabilities, valuation of deferred tax assets, accounting for acquisitions and the recoverability of goodwill and identifiable intangible assets. These accounting policies, as well as others, are described as follows and in Note 2 to the Consolidated Financial Statements included elsewhere in this quarterly report on Form 10-Q.

Percentage of Completion Method of Accounting

        Approximately 84% of our revenue was earned on a project basis and recognized through the percentage of completion method of accounting. Under this method contract revenue recognizable at any time during the life of a contract is determined by multiplying expected total contract revenue by the percentage of contract costs incurred at any time to total estimated contract costs. More specifically, as part of the negotiation and bidding process in which we engage in connection with obtaining installation contracts, we estimate our contract costs, which include all direct materials (exclusive of rebates), labor and subcontract costs and indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs and depreciation costs. These contract costs are included in our results of operations under the caption "Cost of Services." Then, as we perform under those contracts, we measure costs incurred, compare them to total estimated costs to complete the contract, and recognize a corresponding proportion of contract revenue. Labor costs are considered to be incurred as the work is performed. Subcontractor labor is recognized as the work is performed, but is generally subjected to approval as to milestones or other evidence of completion. Non-labor project costs consist of purchased equipment, prefabricated materials and other materials. Purchased equipment on our projects is substantially produced to job specifications and is a value added element to our work. The costs are considered to be incurred when title is transferred to us, which typically is upon delivery to the worksite. Prefabricated materials, such as ductwork and piping, are generally performed at our shops and recognized as contract costs when fabricated for the unique specifications of the job. Other materials cost are not significant and are generally recorded when delivered to the worksite. This measurement and comparison process requires updates to the estimate of total costs to complete the contract, and these updates may include subjective assessments.

        We generally do not incur significant costs prior to receiving a contract, and therefore, these costs are expensed as incurred. In limited circumstances, when significant pre-contract costs are incurred, they are deferred if the costs can be directly associated with a specific contract and if their recoverability from the contract is probable. Upon receiving the contract, these costs are included in contract costs. Deferred costs associated with unsuccessful contract bids are written off in the period that we are informed that we will not be awarded the contract.

        Project contracts typically provide for a schedule of billings or invoices to the customer based on reaching agreed-upon milestones or as we incur costs. The schedules for such billings usually do not precisely match the schedule on which costs are incurred. As a result, contract revenue recognized in the statement of operations can and usually do differ from amounts that can be billed or invoiced to the customer at any point during the contract. Amounts by which cumulative contract revenue recognized on a contract as of a given date exceed cumulative billings to the customer under the contract are reflected as a current asset in our balance sheet under the caption "Costs and estimated earnings in excess of billings." Amounts by which cumulative billings to the customer under a contract as of a given date exceed cumulative contract revenue recognized on the contract are reflected as a current liability in our balance sheet under the caption "Billings in excess of costs and estimated earnings."

        The percentage of completion method of accounting is also affected by changes in job performance, job conditions and final contract settlements. These factors may result in revisions to estimated costs and, therefore, revenue. Such revisions are frequently based on further estimates and

19

Table of Contents

subjective assessments. The effects of these revisions are recognized in the period in which revisions are determined. When such revisions lead to a conclusion that a loss will be recognized on a contract, the full amount of the estimated ultimate loss is recognized in the period such conclusion is reached, regardless of the percentage of completion of the contract.

        Revisions to project costs and conditions can give rise to change orders under which the customer agrees to pay additional contract price. Revisions can also result in claims we might make against the customer to recover project variances that have not been satisfactorily addressed through change orders with the customer. Except in certain circumstances, we do not recognize revenue or margin based on change orders or claims until they have been agreed upon with the customer. The amount of revenue associated with unapproved change orders and claims is currently immaterial. Variations from estimated project costs could have a significant impact on our operating results, depending on project size, and the recoverability of the variation via additional customer payments.

Accounting for Allowance for Doubtful Accounts

        We are required to estimate the collectability of accounts receivable and provide an allowance for doubtful accounts for receivable amounts we believe it is probable we will not ultimately collect. This requires us to make certain judgments and estimates involving, among others, the creditworthiness of our customers, prior collection history with our customers, ongoing relationships with our customers, the aging of past due balances, our lien rights, if any, in the property where we performed the work, and the availability, if any, of payment bonds applicable to the contract. These estimates are evaluated and adjusted as needed when additional information is received.

Accounting for Self-Insurance Liabilities

        We are substantially self-insured for workers' compensation, employer's liability, auto liability, general liability and employee group health claims in view of the relatively high per-incident deductibles we absorb under our insurance arrangements for these risks. Losses up to deductible amounts are estimated and accrued based upon known facts, historical trends and industry averages. Loss estimates associated with the larger and longer-developing risks—workers' compensation, auto liability and general liability—are reviewed by a third party actuary quarterly. We believe these accruals are adequate. However, insurance liabilities are difficult to estimate due to unknown factors, including the severity of an injury, the determination of our liability in proportion to other parties, timely reporting of occurrences, ongoing treatment or loss mitigation, general trends in litigation recovery outcomes and the effectiveness of safety and risk management programs. Therefore, if actual experience differs from the assumptions and estimates used for recording the liabilities, adjustments may be required and would be recorded in the period that such experience becomes known.

        Our self-insurance arrangements currently are as follows:

        Workers' Compensation— The per-incident deductible for workers' compensation is $500,000. Losses above $500,000 are determined by statutory rules on a state-by-state basis, and are fully covered by excess workers' compensation insurance.

        Employer's Liability— For employer's liability, the per incident deductible is $500,000. We are fully insured for the next $500,000 of each loss, and then have several layers of excess loss insurance policies that cover losses up to $100 million in aggregate across this risk area (as well as general liability and auto liability noted below).

        General Liability— For general liability, the per incident deductible is $500,000. We are fully insured for the next $1.5 million of each loss, and then have several layers of excess loss insurance policies that cover losses up to $100 million in aggregate across this risk area (as well as employer's liability noted above and auto liability noted below).

20

Table of Contents

        Auto Liability— For auto liability, the per incident deductible is $500,000. We are fully insured for the next $1.5 million of each loss, and then have several layers of excess loss insurance policies that cover losses up to $100 million in aggregate across this risk area (as well as employer's liability and general liability noted above).

        Employee Medical— We have two medical plans. The deductible for employee group health claims is $300,000 per person, per policy (calendar) year for each plan. Insurance then covers any responsibility for medical claims in excess of the deductible amount.

        Our $100 million of aggregate excess loss coverage above applicable per-incident deductibles represents one policy limit that applies to all lines of risk; we do not have a separate $100 million of excess loss coverage for each of general liability, employer's liability and auto liability.

Accounting for Deferred Tax Assets