ENERTECK CORP - Annual Report: 2013 (Form 10-K)

etck_10k.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended DECEMBER 31, 2013

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 0-31981

ENERTECK CORPORATION

(Exact Name of Registrant as Specified in Its Charter)

Delaware		47-0929885
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification Number)

10701 Corporate Drive, Suite 150 Stafford, Texas		77477
(Address of principal executive offices)		(Zip Code)

Registrant’s telephone number, including area code: (281) 240-1787

Securities registered pursuant to Section 12(b) of the Exchange Act: None

Securities registered pursuant to Section 12(g) of the Exchange Act: Common Stock ($.001 par value)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definition of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer	o	Accelerated filer	o
Non-accelerated filer	o	Smaller reporting company	x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No x

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant (14,328,579) as of June 30, 2013, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $3,582,000. The number of shares outstanding of the Common Stock ($.001 par value) of the registrant as of the close of business on April 10, 2014 was 24,983,055.

Documents Incorporated by Reference: None

ENERTECK CORPORATION

TABLE OF CONTENTS

		Page
PART I

Item 1.	Description of Business		4

Item 1A.	Risk Factors		12

Item 1B.	Unresolved Staff Comments		16

Item 2.	Properties		16

Item 3.	Legal Proceedings		16

Item 4.	Mine Safety Disclosures		16

PART II

Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities		17

Item 6.	Selected Financial Data		19

Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations		19

Item 7A.	Quantitative and Qualitative Disclosures About Market Risk		26

Item 8.	Financial Statements and Supplementary Data		27

Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure		27

Item 9A.	Controls and Procedures		27

Item 9B.	Other Information		27

PART III

Item 10.	Directors, Executive Officers and Corporate Governance		28

Item 11.	Executive Compensation		30

Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters		32

Item 13.	Certain Relationships and Related Transactions, and Director Independence		33

Item 14.	Principal Accountant Fees and Services		34

PART IV

Item 15.	Exhibits and Financial Statement Schedules		35

	Signatures		38

Forward-Looking Statements

When used in this document, the words “may,” “will,” “expect,” “anticipate,” “continue,” “estimate,” “intend,” “plans”, and similar expressions are intended to identify forward-looking statements regarding events, conditions and financial trends which may affect our future plans of operations, business strategy, operating results and financial position. Forward looking statements in this prospectus include without limitation statements relating to trends affecting our financial condition or results of operations, our business and growth strategies and our financing plans.

Such statements are not guarantees of future performance and are subject to risks and uncertainties and actual results may differ materially from those included within the forward-looking statements as a result of various factors. Such factors include, among other things, general economic conditions; cyclical factors affecting our industry; lack of growth in our industry; our ability to comply with government regulations; a failure to manage our business effectively; our ability to sell products at profitable yet competitive prices; and other risks and factors set forth from time to time in our filings with the Securities and Exchange Commission (the “SEC”).

Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date made. We undertake no obligation to publicly release the result of any revision of these forward-looking statements to reflect events or circumstances after the date they are made or to reflect the occurrence of unanticipated events.

PART I

Item 1. Business.

Introduction

Enerteck Corporation (the “Company” or “EnerTeck Parent”), formerly named Gold Bond Mining Company and then Gold Bond Resources, Inc., was incorporated under the laws of the State of Washington on July 30, 1935. On January 9, 2003, we acquired EnerTeck Chemical Corp. (“EnerTeck Sub”) as our wholly owned operating subsidiary. As a result of the acquisition, we are now acting as a holding company, with EnerTeck Sub as our primary operating business. Subsequent to this transaction, on November 24, 2003, we changed our domicile from the State of Washington to the State of Delaware and changed our name from Gold Bond Resources, Inc. to EnerTeck Corporation. Unless the context otherwise requires, the terms “we,” “us” or “our” refer to EnerTeck Corporation and its consolidated subsidiary.

EnerTeck Sub, our wholly owned operating subsidiary, was incorporated in the State of Texas on November 29, 2000. It was formed for the purpose of commercializing a diesel fuel specific combustion catalyst known as EnerBurn®, as well as other combustion enhancement and emission reduction technologies. Nalco/Exxon Energy Chemicals, L.P. (“Nalco/Exxon L.P.”), a joint venture between Nalco Chemical Corporation and Exxon Corporation commercially introduced EnerBurn in 1998. When Nalco/Exxon L.P. went through an ownership change in 2000, our founder, Dwaine Reese, formed EnerTeck Sub. It acquired the EnerBurn trademark and related assets and took over the Nalco/Exxon L.P. relationship with the EnerBurn formulator and blender, and its then supplier, Ruby Cat Technology, LLC (“Ruby Cat”).

Since the first quarter of 2011, we have owned a 40% membership interest in a newly formed entity called EnerTeck Environmental, LLC, which was formed for the purpose of marketing and selling a diesel fuel emission reduction technology with the creators of such specific technology (see “Business of the Company and Current Operations” below).

Business of the Company and Current Operations

We, through our wholly owned subsidiary, specialize in the sales and marketing, and since August 2006, in the manufacturing of a fuel borne catalytic engine treatment for diesel engines known as EnerBurn®. We utilize a sales process that includes detailed proprietary customer fleet monitoring protocols in on-road applications that quantify data and assists in managing certain internal combustion diesel engine operating results while utilizing EnerBurn. Test data prepared by Southwest Research Institute and actual customer usage has indicated that the use of EnerBurn in diesel engines improves fuel economy, lowers smoke, and decreases engine wear and the dangerous emissions of both Nitrogen Oxide (NOx) and microscopic airborne solid matter (particulates). Our principal target markets have included the trucking, heavy construction, maritime shipping, railroad and mining industries, as well as federal, state and international government applications. Each of these industries share certain common financial characteristics, i.e. (i) diesel fuel represents a disproportionate share of operating costs; and (ii) relatively small operating margins are prevalent. Considering these factors, management believes that the use of EnerBurn and the corresponding derived savings in diesel fuel costs can positively effect the operating margins of its customers while contributing to a cleaner environment.

We own the EnerBurn trademark and, since July 2006, the EnerBurn formulas and technology. Prior to July 13, 2006, we obtained EnerBurn products and services from Ruby Cat and its affiliates pursuant to arrangement made with Ruby Cat. Pursuant to a memorandum of understanding with Ruby Cat which expired on December 31, 2003, the Company was granted the exclusive, global marketing rights from Ruby Cat and an option to purchase the EnerBurn technology and associated assets by December 31, 2003 for $6.6 million which was not exercised. Following expiration of the memorandum of understanding, Ruby Cat and its affiliates continued to supply EnerBurn products to the Company but not pursuant to a formal written contract. On July 13, 2006, we completed the acquisition of the EnerBurn formulas, technology and associated assets pursuant to an Asset Purchase Agreement executed as of the same date between the Company and the owner of Ruby Cat (see “Our Purchase of the EnerBurn Technology” below).

The majority of our marketing effort since 2005 has been directed at targeting and gaining a foothold in one of several major target areas, including the inland marine diesel market, trucking, heavy construction and mining. Management has focused virtually all resources at pinpointing and convincing certain large potential customers within these markets, with our diesel fuel additive product lines. While we still believe that this is a valid theory, the results, to date, have been less than we had expected. For example, in 2005, we appointed Custom Fuel Services Inc., a subsidiary of Ingram Barge and which provides dockside and midstream fueling from nine service locations in Louisiana, Kentucky, Illinois, West Virginia, Missouri and Iowa, as our exclusive reseller of EnerBurn and the related technology on the Western Rivers of the United States, meaning the Mississippi River, its tributaries, South Pass, and Southwest Pass, excluding the Intra Coastal Waterway. Since 2006, sales have been sporadic with Custom and we cannot guarantee that we will ever generate meaningful revenues from our relationship with Custom.

A substantial portion of 2010 was spent redirecting our marketing emphasis for our primary product, EnerBurn, to solidify our major customers and expanding to newer, more innovative areas. As such, we have created marketing alliances domestically and internationally with two new marketing groups, EnerGreen Technologies PTY, based in Australia (“EnerGreen”), and G2 Fuel Technologies, LLC (“G2 Technologies”), a minority owned marketing firm working in both the domestic and foreign markets (see “Sales and Marketing Strategy” below”).

G2 Technologies, our new Certified Minority supplier and distributor, had advised us that several of its customers would start using EnerBurn during 2013. G2 Technologies now expects that sales should show significant increases during 2014 and thereafter.

As indicated above, since the first quarter of 2011, we have owned a 40% membership interest in a newly formed entity called EnerTeck Environmental, LLC (“EnerTeck Environmental”), which was formed for the purpose of marketing and selling a diesel fuel emission reduction technology with the creators of such specific technology. EnerTeck Environmental was formed as a joint venture with Indian Nation Technologies, LLC (“Indian Nation”) located in Comanche, Oklahoma for the testing and manufacture of an innovative new type of environmental equipment for the remediation of diesel engine emissions for diesel engines in the marine industry. Indian Nation has filed a patent for this equipment called PEx® (Particle Extraction) and we will hold the exclusive marketing rights for this technology for the various applications within the marine diesel industry. Testing commenced late in the first quarters of 2011 on a towboat located on the Mississippi River. The tested engine has been successfully completed and is waiting further action by the tester with regards to receiving California Air Quality Control Board (CARB), approval. It is anticipated that acceptance of this technology this new technology will open vast new marketing opportunities for us in the coming years.

The Industry

General Discussion of Diesel Fuel and Diesel Fuel Additives

As crude oil is heated, various components evaporate at increasingly higher temperatures. First to evaporate is butane, the lighter-than-air gas used in cigarette lighters, for instance. The last components of crude oil to evaporate, and the heaviest, include the road tars used to make asphalt paving. In between are gasoline, jet fuel, heating oil, lubricating oil, bunker fuel (used in ships), and of course diesel fuel. The fuel used in diesel engine applications such as trucks and locomotives is a mixture of different types of molecules of hydrogen and carbon and include aromatics and paraffin. Diesel fuel cannot burn in liquid form. It must vaporize into its gaseous state. This is accomplished by injecting the fuel through spray nozzles at high pressure. The smaller the nozzles utilized and the higher the pressure, the finer the fuel spray and vaporization. When more fuel vaporizes, combustion is more complete, so less soot will form inside the cylinders and on the injector nozzles. Soot is the residue of carbon, partially burned and unburned fuel.

Sulfur is also found naturally in crude oil. Sulfur is a slippery substance and it helps lubricate fuel pumps and injectors. It also forms sulfuric acid when it burns and is a catalyst for the formation of particulate matter (one of the exhaust emissions being regulated). In an effort to reduce emissions, the sulfur content of diesel fuel is being reduced through the refinery process; however, the result is a loss of lubricity.

Diesel fuel has other properties that affect its performance and impact on the environment as well. The main problems associated with diesel fuel include:

·	Difficulty getting it to start burning o Difficulty getting it to burn completely o Tendency to wax and gel

·	With introduction of low sulfur fuel, reduced lubrication

·	Soot clogging injector nozzles

·	Particulate emissions

·	Water in the fuel

·	Bacterial growth

Diesel fuel additives have been developed to address the variety of problems associated with diesel fuel performance.

Diesel Fuel and the Environment

Diesel fuel is the most cost effective fuel/engine technology available for heavy-duty industrial and vehicle service. However, environmentally it needs dramatic improvement. Governments worldwide are legislating specifications regarding the fuel itself and diesel engine design.

Today’s advanced diesel engines are far cleaner than the smoke-belching diesels of recent decades. Unfortunately, even smokeless diesel engines are not clean enough to meet current stricter air pollution regulations.

While diesel engines are the only existing cost-effective technology making significant inroads in reducing “global warming” emissions from motor vehicles, it is not sufficient to satisfy regulators and legislators. Diesel engines will soon be required to adhere to stringent regulatory/legislative guidelines that meet near “zero” tailpipe emissions, especially on smog-forming nitrogen oxides (NOx), particulate matter (PM) and “toxins” the organic compounds of diesel exhaust.

Diesel engines can become ultra-clean. Meeting the environmental challenges will require extensive research on clean-diesel technology. Research in this area is currently being sponsored by government agencies, major engine companies, truck manufacturers, automobile makers, catalyst producers and, for fuels, oil refining companies and their technology suppliers.

The search for ultra-clean diesel is far from over. Discoveries and breakthroughs will continue to prevail. Large Fortune 500 companies, as well as small, emerging technology companies are investing hundreds of millions of dollars in research and development worldwide on these and other clean-diesel technologies.

Today, there is no economic alternative to diesel engines for most industrial applications. This is true for ocean vessels, tug boats, commercial/recreational vessels, locomotive, trucking, bus transport, construction, mining, agriculture, logging, distributed power generation, and, in many parts of the world, personal transportation. In short, diesel fuel does the world’s heavy work.

Products and Services

The Diesel Fuel Additive Product Line

EnerBurn Combustion Catalyst for Diesel Fuel

EnerBurn is a liquid, chemical formulation, presently sold in bulk quantities to fleet and vessel operators, under three product codes differentiated by market application and product concentration, as indicated below:

Product		Application
EnerBurn EC5805A		U.S. On-Road Market
EnerBurn EC5931A		U.S. Off-Road Market
EnerBurn EC5805C		International Market

Although added to diesel fuel and generally referred to as a diesel fuel additive within the industry, EnerBurn functions as an engine treatment application by removing carbon deposits from the combustion surfaces of the engine and greatly reducing further carbon deposit buildup. It also provides for an increased rate of combustion. By adding EnerBurn to diesel fuel in accordance with proprietary methodology, it forms a non-hazardous catalytic surface in the diesel engine combustion chamber and on the surface of the piston heads. This surface is visible in the form of a monomolecular film that develops after initiation of treatment and remains active for a period of time after cessation of treatment.

The buildup of carbon within the combustion chamber of a diesel engine can generate greater exhaust opacity and increased engine wear. These carbon deposits can cause piston rings to stick and reduce compression resulting in decreased engine efficiency with extended use.

The unique chemical formulation of EnerBurn, when applied in accordance with proprietary methodology, has been shown to produce benefits in fuel economy, NOx formation, smoke, brake horsepower and engine wear (See “Product Testing”, below).

EnerBurn Volumetric Proportioning Injector Equipment (VPI)

Volumetric proportioning injection equipment is used to deliver proper dosage ratios of EnerBurn to the diesel fuel, and are typically offered to our customers in support of an EnerBurn sale. Three equipment vendors supply additive injection equipment to us that is either installed at a bulk fueling depot or onboard the vehicle or vessel.

Product Testing

Southwest Research Institute

The Southwest Research Institute (“SWRI”) of San Antonio, Texas has extensively tested the EnerBurn technology. This institute is an independent, nonprofit, applied engineering and physical sciences research and development organization with 11 technical divisions using multidisciplinary approaches to problem solving. The Institute occupies 1,200 acres and provides nearly two million square feet of laboratories, test facilities, workshops, and offices for more the 2,700 employees who perform contract work for industry and government clients.

The extensive testing of EnerBurn conducted by SWRI confirmed product claims of lower highway smoke, reduced NOx emissions, a significant reduction in engine wear and an increase in horsepower. Actual customer usage data has also confirmed the claim that EnerBurn usage reduces fuel consumption.

A new test has recently begun by one of our largest customers during the first quarter of 2014 at SWRI to demonstrate the effectiveness of EnerBurn on newly developed, more efficient running diesel engines. Management believes that a successful result from this test should lead to significant new business in the marine, rail and other industries.

EnerBurn Proof of Performance Demonstrations

An integral part of our sales process is to conduct proof of performance demonstrations for potential customers wherein we accumulate historical fleet data that documents the effects of the use of EnerBurn (i.e. advantages in terms of increased fuel economy, a decrease in engine wear and reductions in toxic emissions) on that customer’s specific vehicles or vessels. In connection with these proofs of performance demonstrations, we provide fleet monitoring services and forecasts of fuel consumption for purposes of the prospective customer’s own analysis.

The results below are indicative of typical customer experiences using EnerBurn. In many instances, customers have directly informed us about their satisfaction with EnerBurn and the fuel savings that its use has provided them. In all cases, our own comparison of the customer provided historical fuel usage data with the EnerBurn usage (which we have monitored) data has proven to us and the customer that the use of EnerBurn has reduced their fuel consumption. In addition to fuel consumption reduction, the decrease in emissions resulting from EnerBurn use is measured with a device called the UEI Intelligent Solutions Meter. Similarly, the percentage reduction in opacity (smoke generated by diesel engines) is measured by the Wager 6500 Meter (manufactured by Robert H. Wager Co., Inc.).

An EnerBurn proof of performance demonstration of a long haul truck fleet began in August of 1998. The number of trucks treated with EnerBurn exceeded 3,000-Century Class Freightliners, most of that were equipped with Caterpillar or similar type engines. This company’s measurable fuel savings averaged 10.4% over a 3 plus year period while using EnerBurn, resulting in annual fuel savings in excess of $6.5 million. In addition, the company’s maintenance department observed significant reductions in metal loss in crankcase wear-parts, although they did not attempt to quantify the value of this phenomenon.

A fleet of 24 three-year-old 1400 horsepower Morrison Knudson MK1500 locomotives with Caterpillar 3512 diesel engines were used for a 12-month proof of performance demonstration of the effectiveness of EnerBurn. This demonstration started on July 1, 1999 and clearly documented a 10.8% reduction in fuel consumption and a 9.5% reduction in Brake Specific Fuel Consumption (“BSFC”). The demonstration also reflected a significant reduction in engine wear, confirmed by a 56% reduction in copper content of the lube oil.

Three maritime vessels were selected from a large fleet, based on size and typical routes for accessibility of regular fueling at this company’s bulk fueling barge. A proof of performance protocol was developed under the guidance and supervision of this company’s management. The base line demonstration commenced on July 11, 2001 and the final demonstration was performed on February 28, 2002. One of the three demonstration vessels represented an untreated placebo; two were treated with EnerBurn. The two treated vessels exhibited a measured reduction in fuel consumption of 7% and 9.9%, while the untreated placebo experienced nearly a 10% increase in fuel consumption. Additionally five vessels with different diesel engines were selected for proof of performance under the same protocols yielding results in excess of 10% in fuel savings, significant reductions in opacity, from 33%-86%, reductions of NOx emissions between 11% and 20%.

Overview of Worldwide Diesel Fuel Consumption

The U.S. Department of Energy, Energy Information Administration (“EIA”) estimates that worldwide annual consumption of diesel fuel approximates 210 billion U.S. gallons. A breakdown of this estimate is summarized as follows:

	Annual consumption of
	Diesel Fuel - Billion USG/Year

United States		60
Europe		60
Pacific Rim		50
Rest of the World		40
Total Gallons Consumption		210

Domestic Diesel Fuel Consumption

Based on further EIA published data, the following table* depicts domestic distillate fuel oil consumption by end use for 2011.

Energy Use	2011 (Thousand Gallons)

U.S. Total		57,241,480
Residential		3,625,719
Commercial		2,877,761
Industrial		2,177,885
Oil Company		1,381,123
Farm		2,941,463
Electric Power		506,259
Railroad		3,121,145
Vessel Bunkering		2,128,101
On-Highway		36,160,308
Military		251,960
Off-Highway		2,069,754

___________________

*	Sources: Energy Information Administration’s Form EIA-821, “Sales of Fuel Oil and Kerosene,” for 2006-2011. Totals may not equal sum of components due to independent rounding.

Our Target Markets

Our principal target markets have included the trucking, heavy construction, maritime shipping, railroad and mining industries, as well as federal, state and international government applications. We believe each of these industries shares certain common financial characteristics, i.e. (i) diesel fuel represents a disproportionate share of operating costs; and (ii) relatively small operating margins are prevalent. Considering these factors, management believes that the use of EnerBurn and the corresponding derived savings in diesel fuel costs can positively affect the operating margins of its customers while contributing to a cleaner environment.

Sales and Marketing Strategy

The fuel additive industry has historically been mired by a myriad of technically dubious products and potential customers are usually wary of promotional claims by product manufacturers or “snake oil” peddlers as they are sometimes labeled.

Prospective customers in all targeted market sectors and geographic locations are primarily concerned about the potential business risks associated with the adoption of any new fuel or engine treatment. Thus, the first resistant barrier to adoption of a fleet proof of performance demonstration is dispelling fear about impact on engine warranties and any potential business risk associated with a fleet shutdown caused by our product. The potential EnerBurn fuel and maintenance savings are strong motivators but are secondary to risk avoidance. The SWRI fitness for use testing and customer testimonials are paramount in assisting us in addressing these fears.

Potential customers have a strong predisposition to accept only demonstrable proof-of-benefit in their own fleet as justification for any new expenditure. After risk avoidance, the ability to demonstrate and prove results is the primary obstacle for market adoption of the EnerBurn product.

Our sales process begins with a proof of performance demonstration that is a thorough analysis of the potential customer, including fleet type, size, and opportunity. (See “Business - Product Testing - EnerBurn Proof of Performance Demonstrations”, above). This is followed with sales presentations at both the executive level and maintenance level. Executive level sales presentations emphasize return on investment (“ROI”), while maintenance level sales presentations emphasize our technology and why it does not impact engine warranties and any potential business risk associated with a fleet shutdown.

Convincing a potential customer to undertake a proof of performance demonstration is a difficult task because there is a significant expense to be borne by the potential customer. Specifically, the potential customer must pay for both the EnerBurn that is used during the demonstration as well as purchase the additive injection equipment that is also needed. The cost will vary according to the potential customer and the industry in which it is in. For a proof of performance demonstration on a typical fleet of 100 diesel engine trucks, the cost of the EnerBurn would be approximately $30,000, while the average cost of the equipment used would be approximately $20,000 to $50,000. The personnel costs related to providing fleet monitoring services and forecasts of fuel consumption for the potential customer’s analysis are borne either by the Company, its supplier or the sales agent. For a demonstration involving a fleet of 100 hundred trucks, typically 50 to 100 man-hours are involved. The current sales cycle from inception to full customer implementation is typically six to 12-months from initial customer contact. This includes the two to six months it usually takes for the benefits of EnerBurn to begin to take effect in the subject engines during the proof of performance demonstration period.

As indicated above, we have created marketing alliances both domestically and internationally with two marketing groups, EnerGreen and G2 Technologies. We have entered into a Distributorship Agreement with EnerGreen which has a wide network of industrial sector contacts in Australia, Southern Asia, Europe, Brazil, Peru and Paraguay. G2 Technologies has entered into a Reseller and Market Development Agreement with us. G2 Technologies, which is a large minority-owned U.S. defense contractor, intends to sell EnerBurn, injection equipment and emissions control systems to the government and related customers, and has qualified EnerBurn into a government-approved catalog for fuel efficiency and emissions control products.

Our Purchase of the EnerBurn Technology

As mentioned above, prior to July 2006, we obtained EnerBurn products and services from Ruby Cat and its affiliates pursuant to arrangement made with Ruby Cat. Pursuant to a memorandum of understanding with Ruby Cat which expired on December 31, 2003, the Company was granted the exclusive, global marketing rights from Ruby Cat and an option to purchase the EnerBurn technology and associated assets by December 31, 2003 for $6.6 million which was not exercised. Following expiration of the memorandum of understanding, Ruby Cat and its affiliates continued to supply EnerBurn products to the Company but not pursuant to a formal written contract.

On July 13, 2006, we acquired the EnerBurn formulas, technology and associated assets pursuant to an Asset Purchase Agreement executed as of the same date (the “EnerBurn Acquisition Agreement”) between the Company and the owner of Ruby Cat (the “Seller”). Pursuant thereto, the Company acquired from the Seller all of its rights with respect to the liquid diesel motor vehicle fuel additives known as EC5805A and EC5931A products (the “Products”) as well as its rights to certain intellectual property and technology associated with the Products (collectively, the “Purchased Assets”). The purchase price for the Purchased Assets was $3.0 million, payable as follows: (i) $1.0 million paid on July 13, 2006 in cash, and (ii) the remaining $2.0 million evidenced by a promissory note (the “Note”) bearing interest each month at a rate of 4.0% per annum, compounded monthly, and which is to be paid in four annual payments of $500,000 plus accumulated interest to that date on each anniversary of the closing until the entire purchase price is paid in full. In order to secure the debt represented by the Note, the Company executed and delivered to the Seller a Security Agreement in which the Company granted the Seller a first priority lien on the Purchased Assets. The first payment of $500,000 was made in advance in May 2007. An additional $500,000 due July 13, 2008 was also made in advance of the due date, on July 3, 2008. Due to litigation commenced between the Company and the Seller, the Company requested the court to grant it leave to pay the remaining installments under the EnerBurn Acquisition Agreement into the registry of the court pending adjudication of such matter. The court granted the request and the Company paid the third annual installment of $500,000 plus accrued interest into the registry on July 13, 2009. On March 31, 2010, the parties to the lawsuit entered into a settlement agreement pursuant to which, among other things, the remaining installments due under the EnerBurn Acquisition Agreement were paid by the Company on July 22, 2010, along with an additional sum of $75,000.

The EnerBurn Acquisition Agreement provides that for five years after closing the Seller will not, within the United States or anywhere abroad, be engaged in the business of researching, developing, manufacturing, marketing or selling products intended to improve the fuel efficiency of heavy duty diesel engines.

Contemporaneously with the closing, the Company granted the Seller a non-exclusive, fully paid, perpetual, non-revocable, royalty-free, assignable license, to manufacture, market and sell a certain product known as “Thermoboost II”, which has the same chemical formulation as one of the Products and which is used exclusively in home heating oil.

Manufacturing

The acquisition of the EnerBurn formulas, technology and associated assets has provided us the ability to transform our business from a sales organization to a fully integrated manufacturer and distributor of EnerBurn. From 2006 to 2009, the manufacturing of our EnerBurn product had been undertaken pursuant to a Manufacturing and Supply Agreement entered into on August 18, 2006 with Independent Contract Packaging, Inc., a Texas corporation located in Cut and Shoot, Texas (“ICP”). Pursuant to the agreement, ICP was appointed as our non-exclusive manufacturer, blender and packager of our EnerBurn product for a term of three years which ended in 2009. We subsequently moved our principal manufacturing operation to Magna Blend of Waxahachie, Texas, with a second company, J. T. Enterprises of Tyler, Texas as our backup manufacturing facility. We have agreed to supply certain tanks and related equipment and raw materials to be used by J. T. Enterprise to manufacture, blend and package the EnerBurn product, and both Magna Blend and J. T. Enterprises have agreed to provide their manufacturing, blending and packaging services on a commercially reasonably prompt basis according to the specifications received from and required by us. For such services, we have agreed to pay each its fees pursuant to an agreed upon fee schedule. On October 3, 2011, a fire broke out at the Magna Blend Chemical plant in Waxahachie, Texas. We replaced the required raw material inventories and moved our blending operations from Magna Blend to ChemJet Chemicals, and facility located in Conroe, Texas.

Competition

The market for products and services that increase diesel fuel economy, reduce emissions and engine wear is rapidly evolving and intensely competitive and management expects it to increase due to the implementation of stricter environmental standards. Competition can come from other fuel additives, fuel and engine treatment products and from producers of engines that have been modified or adapted to achieve these results. In addition, we believe that new technologies, including additives, will further increase competition.

Our primary current competitors include Lubrizol Corporation, Chevron Oronite Company (a subsidiary of Chevron Corporation), Octel Corp., Clean Diesel Technologies, Inc. and Ethyl Corporation.

Many of our competitors have been in business longer than it has, have significantly greater financial, technical, and other resources, or greater name recognition. Our competitors may be able to respond more quickly to new or emerging technologies and changes in customer requirements. Competition could negatively impact our business. Competitive pressures could cause us to lose market share or to reduce the price of its products, either of which could harm its business, financial condition and operating results.

Management believes that the principal competitive factors in the Company’s market include the:

·	effectiveness of the product;

cost;

·	proprietary technology;

·	ease of use; and

·	Quality of customer service and support.

Government Regulation - Fuel Additive Registration

We need to comply with registration requirements for each geographic jurisdiction in which it sells EnerBurn. On January 21, 2001, the US Environmental Protection Agency, pursuant to the Environmental Protection Act (the “Act”) (40 CFR 79.23) issued permit number EC 5805A in connection with the use of EnerBurn. This registration allows EnerBurn to be used anywhere in the United States for highway use in all over-the-road diesel applications. Additionally, on March 30, 2004, we received a second EPA permit, permit number EC 5931A in connection with the use of EnerBurn. This registration allows EC 5931A to be used anywhere in the United States for use in all diesel applications. Under these registrations, we have pass through rights from the formulator, blender and supplier to sell EnerBurn in on-road applications. However, there are provisions in the Act under which the EPA could require further testing. The EPA has not exercised these provisions yet for any additive. Internationally, we intend to seek registration in other countries as we develops market opportunities.

Our business is impacted by air quality regulations and other regulations governing vehicle emissions as well as emissions from stationary engines. If such regulations were abandoned or determined to be invalid, its prospects may be adversely affected. As an example, if crude oil and resulting diesel prices were to reach or approach historical lows, the emphasis for fuel efficiency would be diminished, potentially impacting sales velocity of the products, consequently adversely affecting our performance. Typically, there are registration and regulation requirements for fuel additives in each country in which they are sold. In the United States, fuel and fuel additives are registered and regulated pursuant to Section 211 of the Clean Air Act. 40 CFR Part 79 and 80 specifically relates to the registration of fuels and fuel additives

In accordance with the Clean Air Act regulations at 40 CFR 79, manufacturers (including importers) of gasoline, diesel fuel and additives for gasoline or diesel fuel, are required to have their products registered by the EPA prior to their introduction into commerce. Registration involves providing a chemical description of the fuel or additive, and certain technical, marketing, and health-effects information. The health-effects research is divided into three tiers of requirements for specific categories of fuels and additives. Tier 1 requires a health-effects literature search and emissions characterization. Tier 2 requires short-term inhalation exposures of laboratory animals to emissions and screened for adverse health effects, unless comparable data are already available. Alternative Tier 2 testing can be required in lieu of standard Tier 2 if EPA concludes that such testing would be more appropriate. Certain small businesses are exempt from some or all the Tier 1 and Tier 2 requirements. Tier 3 provides for follow-up research, if necessary.

Employees

We currently employ five individuals on a full-time basis, and we also engage independent sales representatives. None of our employees are covered by a collective bargaining agreement. We believe that relations with our employees are good.

Item 1A. Risk Factors.

In addition to other information and financial data set forth elsewhere in this report, the following risk factors should be considered carefully in evaluating the Company.

Business and Financial Risks

THE CONTINUING GLOBAL ECONOMIC DOWNTURN AND UNCERTAINTIES MAY HAVE A MATERIAL ADVERSE IMPACT ON OUR BUSINESS AND FINANCIAL CONDITION THAT WE CURRENTLY CANNOT PREDICT. The global economy remains in a prolonged economic downturn which has caused disruptions and extreme volatility in global financial markets, increased rates of default and bankruptcy, and declining consumer and business confidence. As a result of these conditions and uncertainties, our suppliers and customers might experience deterioration of their businesses, cash flow shortages and difficulty obtaining financing which could result in interruptions or delays in our suppliers’ or customers’ performance of any contracts, reductions and delays in customer purchases, delays in or the inability of customers to obtain financing to purchase our products, and bankruptcy of customers. While we cannot predict the duration or severity of the global economic downturn, it could materially affect our business and financial condition.

OUR ABILITY TO CONTINUE AS A GOING CONCERN. The accompanying financial statements have been prepared assuming that we will continue as a going concern which contemplates the realization of assets and satisfaction of liabilities in the normal course of business. During the years ended December 31, 2013 and 2012, we incurred recurring net losses of $1,705,000 and $1,611,000, respectively. In addition, at December 31, 2013, we have an accumulated deficit of $29,813,357. These conditions raise substantial doubt about the Company’s ability to continue as a going concern. The financial statements do not include any adjustments that might be necessary if we are unable to continue as a going concern.

Our continuation as a going concern is contingent upon our ability to obtain additional financing and to generate revenues and cash flow to meet our obligations on a timely basis. Management believes that sales revenues for 2013 and 2012 were considerably less than earlier anticipated primarily due to circumstances which have been corrected or are in the process of being corrected. Tests which were expected to be run and completed during 2013 were, for reasons beyond the company’s control either delayed or rescheduled completely into 2014 and are ongoing at this time. Management expected that marine, railroad and trucking sales would show significant increases in 2013 over what has been generated in the past. That did not materialize. This was caused by delays in the completion of long term client demonstrations for several extremely large new clients which were initially intended to be completed during 2013 and but were delayed and are continuing to take place during 2014. While it remains to be seen if all will be successful, it is believed that the final results will be in our favor and that the company will show significant improvement over the next two years.

We have been able to generate working capital in the past through private placements and issuing promissory notes and believe that these avenues will remain available to the Company if additional financing is necessary. No assurance can be made that any of these efforts will be successful.

WE HAVE A HISTORY OF LOSSES WHICH MAY CONTINUE AND WHICH MAY NEGATIVELY IMPACT OUR ABILITY TO ACHIEVE OUR BUSINESS OBJECTIVES AND OUR FINANCIAL RESULTS. For the years ended December 31, 2013 and 2012, we generated revenues of $278,000 and $126,000, respectively, and incurred net losses of $1,705,000 and $1,612,000, respectively. Continued failure to increase our revenues significantly will harm our business. Even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis in the future. If our revenues grow more slowly than we anticipate, our gross margins fail to maintain its current improvement, or our operating expenses exceed our expectations, our operating results will suffer. If we are unable to sell our products at acceptable prices relative to our costs, or if we fail to develop and introduce on a timely basis new products from which we can derive additional revenues, our financial results will suffer.

WE FACED CERTAIN RISKS AND CHALLENGES AS A COMPANY WITH A LIMITED OPERATING HISTORY. We acquired EnerTeck Sub on January 9, 2003 which company was only formed in November 2000 and, therefore, has a limited operating history. As a result, we are subject to all the risks and challenges associated with the operation of a enterprise with a limited operating history, including inexperience, lack of a track record, difficulty in entering the targeted market place, competition from more established businesses with greater financial resources and experience, an inability to attract and retain qualified personnel (including, most importantly, sales and marketing personnel) and a need for additional capital to finance our marketing efforts and intended growth. In addition, we cannot rely upon historical results in order to anticipate and timely adapt to increases or decreases in sales, revenues or expenses. We cannot assure you that we will be successful in overcoming these and other risks and challenges that we face as an enterprise with a limited operating history.

THE ENERBURN TECHNOLOGY HAS NOT GAINED MARKET ACCEPTANCE, NOR DO WE KNOW WHETHER A MARKET WILL DEVELOP FOR IT IN THE FORESEEABLE FUTURE TO GENERATE ANY MEANINGFUL REVENUES. The EnerBurn technology has received only limited market acceptance. This technology is a relatively new product to the market place and we have not generated any significant sales. Although ever growing concerns and regulation regarding the environment and pollution has increased interest in environmentally friendly products generally, the engine treatment and fuel additive market remains an evolving market. The EnerBurn technology competes with more established companies such as Lubrizol Corporation, Chevron Oronite Company (a subsidiary of Chevron Corporation), Octel Corp., Clean Diesel Technologies, Inc. and Ethyl Corporation, as well as other companies whose products or services alter, modify or adapt diesel engines to increase their fuel efficiency and reduce pollutants. Acceptance of EnerBurn as an alternative to such traditional products and/or services depends upon a number of factors including:

·	favorable pricing visa vie projected savings from increased fuel efficiency

·	the ability to establish the reliability of EnerBurn products relative to available fleet data

·	public perception of the product

For these reasons, we are uncertain whether our technology will gain acceptance in any commercial markets or that demand will be sufficient to create a market large enough to produce any meaningful revenue or earnings. Our future success depends upon customers’ demand for our products in sufficient amounts.

OUR TECHNOLOGY MAY BE ADVERSELY AFFECTED BY FUTURE TECHNOLOGICAL CHANGES AND ENVIRONMENTAL REGULATORY REQUIREMENTS. Although diesel engines are now being manufactured that have reduced dangerous emissions, this has not satisfied governmental regulators and legislators. We believe that diesel engines themselves may soon be required to adhere to stringent guidelines that produce nearly zero tailpipe emissions. Research in this area is currently being sponsored by governmental agencies, major engine companies, truck manufacturers, automobile makers, catalyst producers, oil refining companies and their technology suppliers. If such research is successful, it could eventually reduce the need for diesel fuel additives such as EnerBurn as they relate to pollution control.

OUR LACK OF DIVERSIFICATION WILL INCREASE THE RISK OF AN INVESTMENT IN US. Our business has historically been entirely dependent upon the acceptance of EnerBurn in the market place. Beginning in 2011, however, we became involved in a joint venture for the testing and manufacture of an innovative new type of environmental equipment for the remediation of diesel engine emissions for diesel engines in the marine industry which we believe will lead to new marketing and revenue opportunities. While we may no longer be entirely dependent upon the acceptance of EnerBurn in the marketplace for our success, our business opportunities are still limited and lack significant diversification. As a result, we are impacted more acutely by factors affecting our industry or the regions in which we operate that we would if our business were more diversified, enhancing our risk profile.

OUR SALES PROCESS IS COSTLY AND TIME CONSUMING WHICH DECREASES OUR ABILITY TO EFFECT SALES. In order to affect EnerBurn sales, we must prove to a potential customer that the use of our product is specifically beneficial to and cost effective for that potential customer. We accomplish this by conducting proof of performance demonstrations. Our supplier, our sales agent and/or we bear the cost to provide the personnel to do the monitoring and analyzing of compiled data. However, the potential customer must bear the cost of the EnerBurn and equipment used during the trial period. We cannot assure you that we will be able to convince potential customers to undertake this expense and affect a significant number of sales. Furthermore, we cannot assure you that the results of a specific proof of performance demonstration will prove that the use of EnerBurn will be beneficial to that specific potential customer, or if beneficial, that the potential customer will purchase EnerBurn. If, after conducting the proof of performance demonstration, the potential customer does not purchase our product, we will have wasted the time and the cost of providing personnel to the proof of performance demonstration.

WE FACE INTENSE COMPETITION AND MAY NOT HAVE THE FINANCIAL AND HUMAN RESOURCES NECESSARY TO KEEP UP WITH RAPID TECHNOLOGICAL CHANGES WHICH MAY RESULT IN OUR TECHNOLOGY BECOMING OBSOLETE. The diesel fuel additive business and related anti-pollutant businesses are subject to rapid technological change, especially due to environmental protection regulations, and subject to intense competition. We compete with both established companies and a significant number of startup enterprises. We face competition from producers and/or distributors of other diesel fuel additives (such as Lubrizol Corporation, Chevron Oronite Company, Octel Corp., Clean Diesel Technologies, Inc. and Ethyl Corporation), from producers of alternative mechanical technologies (such as Algae-X International, Dieselcraft, Emission Controls Corp. and JAMS Turbo, Inc.) and from alternative fuels (such as bio-diesel fuel and liquefied natural gas) all targeting the same markets and claiming increased fuel economy, and/or a decrease in toxic emissions and/or a reduction in engine wear. Most of our competitors have substantially greater financial and marketing resources than we do and may independently develop superior technologies which may result in our technology becoming less competitive or obsolete. We may not be able to keep pace with this change. If we cannot keep up with these advances in a timely manner, we will be unable to compete in our chosen markets.

THE COMPANY NEEDS TO MAINTAIN ENERBURN’S EPA REGISTRATIONS. In accordance with the regulations promulgated under the US Clean Air Act, manufacturers (including importers) of gasoline, diesel fuel and additives for gasoline or diesel fuel, are required to have their products registered with the EPA prior to their introduction into the market place. Currently, EnerBurn products have two such registrations (EPA # 5805A and 5931A). However, unforeseen future changes to the registration requirements may be made, and these products, or either one of them, may not be able to qualify for registration under such new requirements. The loss of the EPA registrations or restrictions on the current registrations could have an adverse affect on our business and plan of operation.

Ruby Cat registered these products with the US Environmental Protection Agency which registrations we acquired in connection with the EnerBurn Acquisition Agreement. EnerBurn is registered in the United States only, and we are considering its registration in other countries. Further testing could be needed in these or other countries. We cannot assure you that EnerBurn will pass any future testing that may be required. The failure of EnerBurn to obtain registration in countries or areas where we would like to market it, could have a materially adverse effect on our business and plan of operation.

FAILURE TO PROPERLY MANAGE OUR POTENTIAL GROWTH POTENTIAL WOULD BE DETRIMENTAL TO HOLDERS OF OUR SECURITIES. Since we have limited operating history, any significant growth will place considerable strain on our financial resources and increase demands on our management and on our operational and administrative systems, controls and other resources. There can be no assurance that our existing personnel, systems, procedures or controls will be adequate to support our operations in the future or that we will be able to successfully implement appropriate measures consistent with our growth strategy. As part of this growth, we may have to implement new operational and financial systems, procedures and controls to expand, train and manage our employees and maintain close coordination among our technical, accounting, finance, marketing, sales and editorial staff. We cannot guarantee that we will be able to do so, or that if we are able to do so, we will be able to effectively integrate them into our existing staff and systems. We may fail to adequately manage our anticipated future growth. We will also need to continue to attract, retain and integrate personnel in all aspects of our operations. Failure to manage our growth effectively could hurt our business.

WE ARE RELIANT UPON THIRD-PARTY MANUFACTURERS FOR OUR PRODUCTS; ANY PROBLEMS THEY ENCOUNTER WILL DETRIMENTALLY IMPACT OUR BUSINESS. The manufacturing of our products are undertaken by third-party manufacturers. There can be no assurance that such manufacturers will be reliable in meeting delivery schedules, or that such manufacturers will not experience their own financial difficulties or encounter other problems which could detrimentally impact our business. Since 2009, our principal manufacturing facility was with Magna Blend of Waxahachie, Texas. As a result of a fire which occurred in October 2011 at Magna Blend’s plant, we did lose inventory which lead to certain delays in fulfilling product orders. Subsequent to the fire, we were reimbursed by Magna Blend for the full replacement value of our lost inventory and one of our established customers agreed to supply us with several drums of EnerBurn which were being held in its supply inventory so that we could service our customers. In addition, we have now moved our manufacturing to ChemJet Chemicals located in Conroe, Texas. Although we do not believe this incident had a material adverse affect on our financial condition or operations, there is no guarantee that such will be the case in the event we should encounter a similar or different problem with our manufacturing arrangements in the future. Furthermore, in the event we need to secure other manufacturers, there can be no assurance that we will be able to secure such arrangements on terms acceptable to the Company.

WE ARE DEPENDENT ON KEY PERSONNEL INCLUDING OUR EXECUTIVE OFFICERS. Due to the specialized nature of our business, our success depends in part upon attracting and retaining the services of qualified managerial and technical personnel. The market for such persons remains competitive and the relative small size of the Company may make it more difficult for us to recruit and retain qualified persons. In addition, and since we are a small company, a loss of one or more of our current officers could severely and negatively impact our operations.

MAINTAINING AND IMPROVING OUR FINANCIAL CONTROLS MAY STRAIN OUR RESOURCES AND DIVERT MANAGEMENT’S ATTENTION. We are subject to the requirements of the Securities Exchange Act of 1934, including the requirements of the Sarbanes-Oxley Act of 2002. The requirements of these rules and regulations have increased, and we expect will continue to increase, our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and may also place undue strain on our personnel, systems and resources. The Sarbanes-Oxley Act requires, among other things, that we maintain effective disclosure controls and procedures and internal control over financial reporting. This can be difficult to do. As a result of this and similar activities, management’s attention may be diverted from other business concerns, which could have a material adverse effect on our business, financial condition and results of operations.

RELATED PARTY NOTES AND ADVANCES PRESENT A SIGNIFICANT RISK. Due to our lack of meaningful revenues, we have been forced to finance our operations primarily from capital which has been raised from third parties and promissory notes and advances from related parties. As of December 31, 2013, such loans and advances from related parties total $2,015,000. Many of these loans are past due and certain others are due on demand. Although the Company does not expect any of such lenders to demand payment until the Company has adequate resources to pay back such loans and advances, there can be no assurance that such will be the case. This presents a significant risk to the Company in that in the event any of such lenders demand payment, the Company may not have the necessary cash to meet such payment obligations, or if it does, such payments may draw significantly on the Company’s cash position. Any of such events will likely have a materially detrimental effect on the Company.

Risks Related To Our Common Stock

WE HAVE ISSUED A SUBSTANTIAL NUMBER OF WARRANTS TO PURCHASE OUR COMMON STOCK WHICH WILL RESULT IN SUBSTANTIAL DILUTION TO THE OWNERSHIP INTERESTS OF OUR EXISTING SHAREHOLDERS. As of December 31, 2013, we had 24,897,341 shares of common stock outstanding. Up to an additional 4,256,667 shares are issuable upon the exercise of the warrants currently outstanding and up to 963,402 shares are issuable upon exercise of options currently outstanding. The exercise of all of these warrants and options will substantially dilute the ownership interests of our existing shareholders.

WE DO NOT INTEND TO PAY DIVIDENDS IN THE FORESEEABLE FUTURE. We have never declared or paid a dividend on our common stock. We intend to retain earnings, if any, for use in the operation and expansion of our business and, therefore, do not anticipate paying any dividends in the foreseeable future.

THE TRADING PRICE OF OUR COMMON STOCK MAY BE VOLATILE. The trading price of our shares has, from time to time, fluctuated widely and in the future may be subject to similar fluctuations. The trading price may be affected by a number of factors including the risk factors set forth in this report as well as our operating results, financial condition, announcements of innovations or new products by us or our competitors, general conditions in the market place, and other events or factors. Although we believe a number of registered broker dealers currently make a market in our common stock, we cannot assure you that any of these firms will continue to serve as market makers or have the financial capability to stabilize or support our common stock. A reduction in the number of market makers or the financial capability of any of these market makers could also result in a decrease in the trading volume of and price of our shares. In recent years, broad stock market indices, in general, and the securities of technology companies, in particular, have experienced substantial price fluctuations. Such broad market fluctuations may adversely affect the future trading price of our common stock.

OUR STOCK PRICE MAY EXPERIENCE VOLATILITY. The market price of the common stock, which currently trades over-the-counter, has, in the past, fluctuated over time and may in the future be volatile. The Company believes that there are a small number of market makers that make a market in the Company’s common stock. The actions of any of these market makers could substantially impact the volatility of the Company’s common stock.

POTENTIAL FUTURE SALES PURSUANT TO RULE 144. Many of the shares of Common Stock presently held by management and others are “restricted securities” as that term is defined in Rule 144, promulgated under the Securities Act. Under Rule 144, a person (or persons whose shares are aggregated) who has satisfied a certain holding period, may, under certain circumstances sell such shares or a portion of such shares. Effective as of February 15, 2008, the holding period for the resale of restricted securities of reporting companies was shortened from one year to six months. Additionally, the SEC substantially simplified Rule 144 compliance for non-affiliates by allowing non-affiliates of reporting companies to freely resell restricted securities after satisfying a six-month holding period (subject only to the Rule 144(c) public information requirement until the securities have been held for one year) and by allowing non-affiliates of non-reporting companies to freely resell restricted securities after satisfying a 12-month holding period. Such holding periods have already been satisfied in many instances. Therefore, actual sales or the prospect of sales of such shares under Rule 144 in the future may depress the prices of the Company’s securities.

OUR COMMON STOCK IS A PENNY STOCK. Our Common Stock is classified as a penny stock, which trades over-the-counter. As a result, an investor may find it more difficult to dispose of or obtain accurate quotations as to the price of the shares of the Common Stock. In addition, the “penny stock” rules adopted by the Securities and Exchange Commission subject the sale of the shares of the Common Stock to certain regulations which impose sales practice requirements on broker-dealers. For example, broker-dealers selling such securities must, prior to effecting the transaction, provide their customers with a document that discloses the risks of investing in such securities. Furthermore, if the person purchasing the securities is someone other than an accredited investor or an established customer of the broker-dealer, the broker-dealer must also approve the potential customer’s account by obtaining information concerning the customer’s financial situation, investment experience and investment objectives. The broker-dealer must also make a determination whether the transaction is suitable for the customer and whether the customer has sufficient knowledge and experience in financial matters to be reasonably expected to be capable of evaluating the risk of transactions in such securities. Accordingly, the Commission’s rules may result in the limitation of the number of potential purchasers of the shares of the Common Stock. In addition, the additional burdens imposed upon broker-dealers by such requirements may discourage broker-dealers from effecting transactions in the Common Stock, which could severely limit the market of the Company’s Common Stock.

THE OVER-THE-COUNTER MARKET IS VULNERABLE TO MARKET FRAUD. Securities which trade over-the-counter are frequent targets of fraud or market manipulation, both because of their generally low prices and because reporting requirements for such securities are less stringent than those of the stock exchanges or NASDAQ.

INCREASED DEALER COMPENSATION COULD ADVERSELY AFFECT STOCK PRICE. Over-the-counter market dealers’ spreads (the difference between the bid and ask prices) may be large, causing higher purchase prices and less sale proceeds for investors.

Except as required by the Federal Securities Law, the Company does not undertake any obligation to release publicly any revisions to any forward-looking statements to reflect events or circumstances after the date of this Form 10-KSB or for any other reason.

Item 1B. Unresolved Staff Comments.

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

Item 2. Properties.

We do not own any real estate. We lease approximately 2,722 square feet of space for our executive offices at 10701 Corporate Drive, Suite No. 150, Stafford, Texas. Such lease, which commenced on February 1, 2001, had an original term of three years and has been extended to August 31, 2019. Rent expense for the years ended December 31, 2013 and December 31, 2012 totaled approximately $54,491 and $47,464, respectively. Management believes that the current facility is adequate for the foreseeable future.

Item 3. Legal Proceedings.

The Company is not currently a party to any pending material legal proceeding nor is it aware of any proceeding contemplated by any individual, company, entity or governmental authority involving the Company.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

The Company’s common stock currently trades over-the-counter under the symbol “ETCK”. Until February 23, 2011, the Company’s common stock was listed on the OTC Bulletin Board but has since been listed on the OTCQB, officially part of the OTC Market Group’s OTC Link quotation system. The OTCQB is a relatively new market started in April 2010 for OTC traded companies that are current in their reporting obligations to the SEC. The following table sets forth the range of high and low sales prices per share of the common stock for each of the calendar quarters identified below. These quotations represent inter-dealer prices, without retail mark-up, markdown or commission, and may not represent actual transactions.

Year ended December 31, 2012:	High		Low
Jan. 1, 2012 to March 31, 2012	$	0.48	$	0.18
April l, 2012 to June 30, 2012	$	0.37	$	0.21
July 1, 2012 to Sept. 30, 2012	$	0.30	$	0.08
Oct. 1, 2012 to Dec. 31, 2012	$	0.35	$	0.15

Year ended December 31, 2013:	High		Low
Jan. 1, 2013 to March 31, 2013	$	0.79	$	0.25
April l, 2013 to June 30, 2013	$	0.49	$	0.08
July 1, 2013 to Sept. 30, 2013	$	0.40	$	0.24
Oct. 1, 2013 to Dec. 31, 2013	$	0.34	$	0.15

Holders

As of December 31, 2013, there were approximately 932 stockholders of record of the Company’s Common Stock. This does not reflect persons or entities that hold their stock in nominee or “street name”.

Dividends

The Company has not paid any cash dividends to date, and it has no intention of paying any cash dividends on its common stock in the foreseeable future. The declaration and payment of dividends is subject to the discretion of its Board of Directors and to certain limitations imposed under the Delaware Corporation law. The timing, amount and form of dividends, if any, will depend on, among other things, results of operations, financial condition, cash requirements and other factors deemed relevant by the Board of Directors.

Recent Sales of Unregistered Securities

We sold the following equity securities during the fiscal years ended December 31, 2012 and 2013 that were not registered under the Securities Act of 1933, as amended:

During the first quarter of 2011, we received an advance of $125,000 in gross proceeds for 250,000 shares of common stock at $.50 per share from three investors in a private placement offering to accredited investors only. Such shares were not issued during 2011. This amount has been reported as common stock subscribed in the balance sheet at December 31, 2011 pending completion of the subscription agreements and/or issuance of the shares. During the first quarter of 2012, we issued 175,000 shares to two of such investors in connection with gross proceeds of $87,500. Pending completion of the subscription agreement from the third investor, the balance of 75,000 shares will be issued in connection with the remaining gross proceeds of $37,500. These securities were sold directly by the Company, without engaging in any advertising or general solicitation of any kind and without payment of underwriting discounts or commissions to any person. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended, and/or Rule 506 thereunder.

During the first quarter of 2012, we sold to one accredited investor in a private placement offering 166,667 units at $0.60 per unit with each unit consisting of two shares of our common stock and one common stock purchase warrant. Each warrant is exercisable into one share of common stock at $0.50 per share. These securities were sold directly by the Company, without engaging in any advertising or general solicitation of any kind and without payment of underwriting discounts or commissions to any person. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended, and/or Rule 506 thereunder.

During the third quarter of 2012, we sold 196,500 shares of common stock to an unrelated third party for $196.50 in cash which shares were issued pursuant to the terms of a consulting agreement entered into as of June 1, 2012. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended.

During the first quarter of 2013, we issued 57,142 shares of our common stock for prior legal services rendered in the amount of $20,000. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended.

During the first quarter of 2013, we sold to three accredited investors in a private placement offering 571,414 units at $0.70 per unit with each unit consisting of two shares of our common stock. These securities were sold directly by the Company, without engaging in any advertising or general solicitation of any kind and without payment of underwriting discounts or commissions to any person. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended, and/or Rule 506 thereunder.

During the first quarter of 2013, we granted 400,000 warrants to an unrelated third party for services rendered. These warrants have an exercise price of $0.25 per share which warrants can be exercised on a cash or net exercise basis, provided, however, that in no event shall the holder receive total proceeds of less than $100,000 upon a net exercise of the warrants. Such warrants have a term of seven years.

During the second quarter of 2013, the Company sold to three accredited investors in a private placement offering 222,142 units at $0.70 per unit with each unit consisting of two shares of common stock of the Company. These securities were sold directly by the Company, without engaging in any advertising or general solicitation of any kind and without payment of underwriting discounts or commissions to any person. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended, and/or Rule 506 there under.

During the third quarter of 2013, the Company to sold to an accredited investor in a private placement offering 14,285 units at $0.70 per unit with each unit consisting of two shares of common stock of the Company. These securities were sold directly by the Company, without engaging in any advertising or general solicitation of any kind and without payment of underwriting discounts or commissions to any person. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended, and/or Rule 506 there under.

During the third quarter of 2013, options to acquire 474,201 shares were issued under our 2003 Stock Option Plan to four employees which options are immediately exercisable. These options have an exercise price of $0.35 per share and expire in five years from their issue date.

During the fourth quarter of 2013, the Company to sold to two accredited investors in a private placement offering 42,857 units at $0.70 per unit with each unit consisting of two shares of common stock of the Company. These securities were sold directly by the Company, without engaging in any advertising or general solicitation of any kind and without payment of underwriting discounts or commissions to any person. The securities were issued in reliance upon the exemption from registration pursuant to Section 4(2) of the Securities Act of 1933, as amended, and/or Rule 506 there under.

Equity Compensation Plan Information

Information regarding equity compensations plans, as of December 31, 2013, is set forth in the table below:

Plan category	Number of securities to be issued upon exercise of outstanding options, warrants and rights (a)			Weighted- average exercise price of outstanding options, warrants and rights (b)		Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a)) (c)

Equity compensation plans approved by security holders		963,402	(1)	$	0.56		286,598	(1)

Equity compensation plans not approved by security holders		4,256,667	(2)	$	0.57		N/A

Total		5,220,069		$	0.56		286,598

_____________________

(1)	Represents shares underlying the 2003 Employee Stock Option Plan.

(2)	Represents shares underlying the individual grant of warrants.

Item 6. Selected Financial Data.

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion should be read in conjunction with the audited consolidated financial statements and the notes thereto appearing elsewhere in this report and is qualified in its entirety by the foregoing.

Executive Overview

EnerTeck Corporation (the “Company” or “EnerTeck Parent”), formerly named Gold Bond Mining Company and then Gold Bond Resources, Inc., was incorporated in the State of Washington on July 30, 1935. We acquired EnerTeck Chemical Corp. (“EnerTeck Sub”) as a wholly owned subsidiary on January 9, 2003. As a result of this acquisition, we are now acting as a holding company, with EnerTeck Sub as our primary operating business. Subsequent to this transaction, on November 24, 2003 we changed our domicile from the State of Washington to the State of Delaware and changed our name from Gold Bond Resources, Inc. to EnerTeck Corporation. Unless the context otherwise requires, the terms “we,” “us” or “our” refer to EnerTeck Corporation and its consolidated subsidiary.

EnerTeck Sub, our wholly owned operating subsidiary, was incorporated in the State of Texas on November 29, 2000. It was formed for the purpose of commercializing a diesel fuel specific combustion catalyst known as EnerBurn (TM), as well as other combustion enhancement and emission reduction technologies. Nalco/Exxon Energy Chemicals, L.P. (“Nalco/Exxon L.P.”), a joint venture between Nalco Chemical Corporation and Exxon Corporation commercially introduced EnerBurn in 1998. When Nalco/Exxon L.P. went through an ownership change in 2000, our founder, Dwaine Reese, formed EnerTeck Sub. It acquired the EnerBurn trademark and related assets and took over the Nalco/Exxon L.P. relationship with the EnerBurn formulator and blender, and its supplier, Ruby Cat Technology, LLC (“Ruby Cat”).

We utilize a sales process that includes detailed proprietary customer fleet monitoring protocols in on-road applications that quantify data and assists in managing certain internal combustion diesel engine operating results while utilizing EnerBurn. Test data prepared by Southwest Research Institute and actual customer usage has indicated that the use of EnerBurn in diesel engines improves fuel economy, lowers smoke, and decreases engine wear and the dangerous emissions of both Nitrogen Oxide (NOx) and microscopic airborne solid matter (particulates). Our principal target markets have included the trucking, heavy construction, maritime shipping, railroad and mining industries, as well as federal, state and international government applications. Each of these industries shares certain common financial characteristics, i.e. (i) diesel fuel represents a disproportionate share of operating costs; and (ii) relatively small operating margins are prevalent. Considering these factors, management believes that the use of EnerBurn and the corresponding derived savings in diesel fuel costs can positively effect the operating margins of its customers while contributing to a cleaner environment.

During 2011, we acquired a 40% membership interest in a newly formed entity called EnerTeck Environmental, LLC, which was formed for the purpose of marketing and selling a diesel fuel emission reduction technology with the creators of such specific technology.

Results of Operations

Revenues

We recognized revenues of $278,000 for the year ended December 31, 2013, compared to revenues of $126,000 for the year ended December 31, 2012, an increase in revenues of $152,000. The primary source of revenue for the years ended December 31, 2013 and 2012 is from the sale of EnerBurn to oilfield service, heavy construction and maritime industries. The price levels of product sold in 2013 was relatively comparable to pricing in 2012. This low level in revenues can be traced primarily to delays in completion of important product testing projects and a related lack of new customers. As testing is either underway or completed with several potential new customers and in new areas with existing customers, more sales should occur. It is expected that sales should show significant increases throughout 2014.

Gross Profit

Gross profit, defined as revenues less cost of goods sold, was $211,000 or 76.0% of sales for the year ended December 31, 2013, compared to $84,000 or 66.7% of sales for the year ended December 31, 2012. The gross profit percentage increased 9.3% for the 2013 calendar year compared to the 2012 calendar year due primarily to the mix between chemical and equipment sales, with chemical sales having a slightly higher margin. As our overall volumes increase, we feel confident that there will be an improvement in the gross profit percentage as our manufacturing proficiency continues to improve for our core products. As testing has not as yet been completed and the Company has yet to begin commercial production of our patent pending PEx® technology, which will be custom built to meet the needs of each customer application, no prediction can be made with regard to the gross margins for this segment of the business.

Cost of goods sold was $67,000 for the 2013 calendar year which represented 24.0% of revenues compared to $42,000 for the 2012 calendar year which represented 33.3% of revenues. The decrease in cost of goods sold as a percentage of revenues primarily reflects a slight decrease in overall product cost from our initiation of manufacturing of our products and the sale of more dosing equipment. We have owned the EnerBurn technology and associated assets since its purchase in July 2006. Although our actual manufacturing function is performed for us by an unrelated third party under contract to us, we should continue to realize better gross margins through the manufacturing of our product lines, compared to those we achieved in the past when we purchased all of our products from an outside vendor.

Cost and Expenses

Costs and expenses for operations increased to $1,570,000 for the year ended December 31, 2013 from $1,382,000 for the year ended December 31, 2012, an increase of $188,000, primarily due to an increase in overall wages due to the addition of one employee and the value of warrants issued. Costs and expenses in all periods primarily consisted of payroll, professional fees, rent expense, depreciation expense, amortization expense and other general and administrative expenses. While there has been a substantial increase in costs and expenses for 2013 and 2012 over prior years, it is felt that these increases will lead to a considerable increase in earnings potential in 2014 and future years, though this has not been substantiated to date.

Net Loss

Total net loss for the year ended December 31, 2013, was $1,705,000 as compared to a total net loss of $1,612,000 for the year ended December 31, 2012. This amounts to an increase in net loss for the year ended December 31, 2013 of $93,000 as compared with the year ended December 31, 2012. While sales improved in 2013 compared to the prior year, such additional revenues were offset by increases in wages and non-cash compensation for the issuance of options and warrants. Net income in the future will be dependent upon our ability to successfully complete testing in our projected new markets and new product lines and to increase revenues faster than we increase our selling, general and administrative expenses, research and development expense and other expenses. Our gross margin resulting from our manufacturing of our products should help us in our ability to hopefully become profitable in the future.

Operations Outlook

As testing is either underway or has been completed with several potential new customers and in new areas with existing customers, more sales should occur. We have been informed by EnerGreen, our distributor for Australia, that testing has successfully been completed with a new large customer there and that implementation will start shortly. This implementation will require the installation of injection systems on each of the customer vessels which may take through the end of 2014 to fully occur.

In addition, G2 Technologies, our new Certified Minority supplier and distributor, had advised us that several of its customers would start using EnerBurn during 2013. G2 Technologies now expects that sales should show significant increases during 2014 and thereafter.

As indicated above, since the first quarter of 2011, we have owned a 40% membership interest in a newly formed entity called EnerTeck Environmental, LLC (“EnerTeck Environmental”), which was formed for the purpose of marketing and selling a diesel fuel emission reduction technology with the creators of such specific technology. EnerTeck Environmental was formed as a joint venture with Indian Nation Technologies, LLC (“Indian Nation”) located in Comanche, Oklahoma for the testing and manufacture of an innovative new type of environmental equipment for the remediation of diesel engine emissions for diesel engines in the marine industry. Indian Nation has filed a patent for this equipment called PEx® (Particle Extraction) and we will hold the exclusive marketing rights for this technology for the various applications within the marine diesel industry. EnerTeck Environmental is working with Ingram Barge and is in the process of testing the prototype of the patent pending PEx technology for marine diesel engines. Testing was completed late in the fourth quarter of 2013. The results are now in the hands of the testing company for final analysis and the PEx technology is now pending approval from the California Air Resources Board (CARB).

Liquidity and Capital Resources

On December 31, 2013, we had working capital deficit of ($4,635,000) and stockholders’ deficit of ($4,466,000) compared to working capital deficit of ($3,742,000) and stockholders’ deficit of ($3,614,000) on December 31, 2012. The majority of the decrease in equity stems from poor sales and the issuance of noncash compensation. On December 31, 2013, the Company had $9,000 in cash, total assets of $523,000 and total liabilities of $4,989,000, compared to $24,000 in cash, total assets of $639,000 and total liabilities of $4,252,000 on December 31, 2012.

Net cash used in operating activities was $785,000 for the year ended December 31, 2013, which was primarily due to a net loss of ($1,605,000) for the year ended December 31, 2013, other non-cash charges of $138,000, in inventory of ($52,000) and in accounts payable of ($73,000), partially offset by depreciation and amortization of $177,000, decrease in accounts receivable of $15,000, and increases in accrued interest payable of $181,000 and accrued liabilities of $332,000. Net cash used in operating activities was $763,000 for the year ended December 31, 2012, which was primarily the result of a net loss of ($1,612,000) for the year ended December 31, 2012 partially offset by non-cash charges for Common Stock, Warrants and Options of $1,097,000 and Depreciation and Amortization of $159,000, and increases in accounts payable of $198,000, accrued interest payable of $152,000 and accrued liabilities of $561,000.

Cash used by investing activities was $1,600 for the year ended December 31, 2013 which was the result of the purchase of assets. Cash used in investing activities was $6,600 for the year ended December 31, 2012 which was also due to the purchase of assets.

Cash provided by financing activities was $770,000 for the year ended December 31, 2013 from the proceeds from the sale of common stock of $596,000 and advances of common stock subscriptions of 175,000 compared to cash provided by financing activities of $420,000 for the year ended December 31, 2012 from the proceeds from the sale of common stock of $100,000 and related party notes and advances of $320,000.

On July 13, 2006, we completed the acquisition of the EnerBurn formulas, technology and associated assets pursuant to an Asset Purchase Agreement executed as of the same date (the “EnerBurn Acquisition Agreement”) between the Company and the owner of Ruby Cat (the “Seller”). Pursuant thereto, the Company acquired from the Seller all of its rights with respect to the liquid diesel motor vehicle fuel additives known as EC5805A and EC5931A products (the “Products”) as well as its rights to certain intellectual property and technology associated with the Products (collectively, the “Purchased Assets”). The purchase price for the Purchased Assets was $3.0 million, payable as follows: (i) $1.0 million paid on July 13, 2006 in cash, and (ii) the remaining $2.0 million evidenced by a promissory note (the “Note”) bearing interest each month at a rate of 4.0% per annum, compounded monthly, and which shall be paid in four annual payments of $500,000 plus accumulated interest to that date on each anniversary of the closing until the entire purchase price is paid in full. All payments have been made and, as of July 2010, we have now completed our monetary obligations under the EnerBurn Acquisition Agreement and the Note. Through 2010 this obligation drew significantly on our cash reserves. Starting in 2011 this is no longer the case.

In the past, we have been able to finance our operations primarily from capital which has been raised. To date, sales have not been adequate to finance our operations without investment capital. During 2013, investment capital has provided $771,000 for working capital from the proceeds from sales of common stock, loans and other advances. For the year ended December 31, 2012, cash provided by financing activities was $420,000 also from the proceeds from sales of common stock, loans and other advances made to the Company.

We anticipate, based on currently proposed plans and assumptions relating to our operations, that in addition to our current cash and cash equivalents together with projected cash flows from operations and projected revenues we will require additional investment to satisfy our contemplated cash requirements for the next 12 months. No assurance can be made that we will be able to obtain such investment on terms acceptable to us or at all. We anticipate that our costs and expenses over the next 12 months will be approximately $3.0 million. Our continuation as a going concern is contingent upon our ability to obtain additional financing and to generate revenues and cash flow to meet our obligations on a timely basis. As mentioned above, management acknowledges that sales revenues have been considerably less than earlier anticipated. This was primarily due to a combination of circumstances which have been corrected or are in the process of being corrected and therefore should not reoccur in the future and the general state of the economy. Management expects that sales should show increases in 2014. No assurances can be made that we will be able to obtain required financial on terms acceptable to us or at all. Our contemplated cash requirements beyond 2013 will depend primarily upon level of sales of our products, inventory levels, product development, sales and marketing expenditures and capital expenditures.

Due to our lack of meaningful revenues, we have been forced to finance our operations primarily from capital which has been raised from third parties and promissory notes and advances from related parties. As of December 31, 2013, such loans and advances from related parties total $2,015,000. Many of these loans are past due and certain others are due on demand. The Company does not expect any of such lenders to demand payment until the Company has adequate resources to pay back such loans and advances, there can be no assurance that such will be the case. This debt presents a significant risk to the Company in that in the event any of such lenders demand payment, the Company may not have the necessary cash to meet such payment obligations, or if it does, such payments may draw significantly on the Company’s cash position. Any of such events will likely have a materially detrimental effect on the Company. The principal lender has indicated that he wishes to convert the majority of his loans to common stock during 2014 and the Company expects that this should occur during the second or third quarter of this year, although there can be no assurance such will be the case or that such conversion will occur at all.

Inflation has not significantly impacted the Company’s operations.

Off-Balance Sheet Arrangements

We do not have any off balance sheet arrangements that are reasonably likely to have a current or future effect on our financial condition, revenues, and results of operations, liquidity or capital expenditures.

Significant Accounting Policies

Business and Basis of Presentation

EnerTeck Corporation, formerly Gold Bond Resources, Inc. was incorporated under the laws of the State of Washington on July 30, 1935. On January 9, 2003, the Company acquired EnerTeck Chemical Corp. ("EnerTeck Sub") as its wholly owned operating subsidiary. As a result of the acquisition, the Company is now acting as a holding company, with EnerTeck Sub as its only operating business. Subsequent to this transaction, on November 24, 2003, the Company changed its domicile from the State of Washington to the State of Delaware, changed its name from Gold Bond Resources, Inc. to EnerTeck Corporation.

EnerTeck Sub, the Company’s wholly owned operating subsidiary is a Houston-based corporation. It was incorporated in the State of Texas on November 29, 2000 and was formed for the purpose of commercializing a diesel fuel specific combustion catalyst known as EnerBurn (TM), as well as other combustion enhancement and emission reduction technologies for diesel fuel. EnerTeck’s primary product is EnerBurn, and is registered for highway use in all USA diesel applications. The products are used primarily in on-road vehicles, locomotives and diesel marine engines throughout the United States and select foreign markets.

During 2012, EnerTeck acquired a 40% membership interest in EnerTeck Environmental, LLC (Environmental). Environmental was formed for the purpose of marketing and selling diesel fuel emission reduction technology with the creators of such specific technology. Environmental is working with Ingram Barge and is in the process of testing the prototype of the patent pending PEx technology for marine diesel engines. Testing was completed late in the fourth quarter of 2013. The results are now in the hands of the testing company for final analysis and the PEx technology is now pending approval from the California Air Resources Board (CARB

Principles of Consolidation

The consolidated financial statements include the accounts of EnerTeck Corporation and its wholly-owned subsidiary, EnerTeck Chemical Corp. All significant inter-company accounts and transactions are eliminated in consolidation.

Cash and Cash Equivalents

The Company considers all highly liquid investments purchased with an original maturity of three (3) months or less to be cash and cash equivalents.

Inventory

Inventory primarily consists of market ready EnerBurn plus raw materials required to manufacture the products. Inventory has been valued at the lower of cost or market, using the average cost method.

Included in inventory at December 31, 2010, were three large Hammonds EnerBurn doser systems amounting to $57,000 which were projected to be transferred to marine customers during 2010, but in 2011 were traded for injection units which are more universally adaptable to other customers. Included in inventory at December 31, 2013 and 2012, are various injector units and R & D Equipment amounting to $65,000 and $77,000, respectively. Testing of our newly developed Marine PEX beta unit which is currently included in Inventory was originally scheduled to occur prior to the end of the second quarter of 2013. This was delayed due to monitoring equipment requirements requested by the California Air Resources Board regulations and testing was completed late in the fourth quarter of 2013. The results are now in the hands of the testing company for final analysis and presentation to the California Air Resources Board (CARB).

Finished product amounted to approximately $72,000 and $95,000 at December 31, 2013 and 2012, respectively: the remaining inventory comprises raw materials.

Accounts Receivable

Accounts receivable represent uncollateralized obligations due from customers of the Company and are recorded at net realizable value. This value includes an appropriate allowance for estimated uncollectible accounts to reflect any loss anticipated on the accounts receivable balances and charged to the provision for doubtful accounts. The Company calculates this allowance based on historical write-offs, level of past due accounts and relationships with and economic status of the customers. Accounts are written off as bad debts when all collection efforts have failed and the account is deemed uncollectible. Management has provided an allowance for doubtful accounts of $9,863 as of December 31, 2013.

Property and Equipment

Property and equipment are stated at cost, net of accumulated depreciation. Depreciation is provided for on the straight-line or accelerated method over the estimated useful lives of the assets. The average lives range from five (5) to ten (10) years. Maintenance and repairs that neither materially add to the value of the property nor appreciably prolong its life are charged to expense as incurred. Betterments or renewals are capitalized when incurred.

Intangible Assets

The Company follows the provisions of FASB ASC 350, Goodwill and Other Intangible Assets. FASB ASC 350 addresses financial accounting and reporting for acquired goodwill and other intangible assets. Specifically, FASB ASC 350 addresses how intangible assets that are acquired should be accounted for in financial statements upon their acquisition, as well as how goodwill and other intangible assets should be accounted for after they have been initially recognized in the financial statements. The statement requires the Company to evaluate its intellectual property each reporting period to determine whether events and circumstances continue to support an indefinite life. In addition, the Company tests its intellectual property for impairment on an annual basis, or more frequently if events or changes in circumstances indicate that the asset might be impaired. The statement requires intangible assets with finite lives to be reviewed for impairment whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable and that a loss shall be recognized if the carrying amount of an intangible exceeds its fair value.

Management made the decision during 2009 to change the characterization of its intellectual property to a finite-lived asset and to amortize the remaining balance of its intangible assets to the nominal value of $150,000 by the end of 2012, due to its determination that this now represents the scheduled end of its exclusive registration during that year.

As a result of a review by management of its intangible asset and policies related thereto as of December 31, 2010, it was determined that a further impairment was required to be recorded. This impairment serves to reduce its intellectual property to an amount which management believes represents its fair value. This value would be considered a level 3 measurement under FASB ASC 820, Fair Value Measurements and Disclosures, since it is based on significant unobservable inputs. The Company will re-assess the value of this asset in future periods and make adjustments as considered necessary, rather than record additional amortization. No adjustment was required during the years ended December 31, 2013 and December 31, 2012.

Revenue Recognition

The Company follows the provisions of FASB ASC 605, Revenue Recognition, and recognizes revenues when evidence of a completed transaction and customer acceptance exists, and when title passes, if applicable.

Revenues from sales of product and equipment are recognized at the point when a customer order has been shipped and invoiced.

Income Taxes

The Company will compute income taxes using the asset and liability method. Under the asset and liability method, deferred income tax assets and liabilities are determined based on the differences between the financial reporting and tax bases of assets and liabilities and are measured using the currently enacted tax rates and laws. A valuation allowance is provided for the amount of deferred tax assets that, based on evidence from prior years, may not be realized over the next calendar year or for some years thereafter.

The current and deferred tax provisions in the financial statements include consideration of uncertain tax positions in accordance with FASB ASC 740, Income Taxes. Management believes there are no significant uncertain tax positions, so no adjustments have been reported from adoption of FASB ASC 740. The Company files income tax returns in the U.S. federal jurisdiction, and various state jurisdictions. The Company is no longer subject to income tax examinations by the Internal Revenue Service for years prior to 2010. For state tax jurisdictions, the Company is no longer subject to income tax examinations for years prior to 2009.

Income (Loss) Per Common Share

The basic net income (loss) per common share is computed by dividing the net income (loss) applicable to common stockholders by the weighted average number of common shares outstanding.

During the year ended December 31, 2011, EnerTeck entered into stock sales agreements with investors who contributed $175,000 in cash to the Company for 350,000 shares of common stock. The shares had not been issued as of December 31, 2012 but retained the rights associated with the respective class of stock. Accordingly, these shares were considered common stock equivalents for purposes of computing basic earnings per share. 275,000 of these shares were issued during 2012, and 75,000 remain unissued.

Diluted net income (loss) per common share is computed by dividing the net income applicable to common stockholders, adjusted on an “as if converted” basis, by the weighted average number of common shares outstanding plus potential dilutive securities. For 2013 and 2012, potential dilutive securities had an anti-dilutive effect and were not included in the calculation of diluted net loss per common share.

Management Estimates and Assumptions

The accompanying financial statements are prepared in conformity with accounting principles generally accepted in the United States of America which require management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.

Financial Instruments

The Company’s financial instruments recorded on the balance sheet include cash and cash equivalents, accounts receivable, accounts payable and note payable. The carrying amounts approximate fair value because of the short-term nature of these items.

Stock Options and Warrants

Effective January 1, 2006, the Company began recording compensation expense associated with stock options and other forms of equity compensation in accordance with FASB ASC 718, Stock Compensation.

Taxes Collected

The Company collects sales taxes assessed by governmental authorities imposed on certain sales to customers. Sales taxes collected are included in revenues; net amounts paid are reported as expenses in the consolidated statement of operations.

Recently Issued Accounting Pronouncements

In January 2013, the FASB issued ASU No. 2013-01, Balance Sheet (Topic 210): Clarifying the Scope of Disclosures about Offsetting Assets and Liabilities, which clarifies which instruments and transactions are subject to the offsetting disclosure requirements originally established by ASU 2011-11. The new ASU addresses preparer concerns that the scope of the disclosure requirements under ASU 2011-11 was overly broad and imposed unintended costs that were not commensurate with estimated benefits to financial statement users. In choosing to narrow the scope of the offsetting disclosures, the Board determined that it could make them more operable and cost effective for preparers while still giving financial statement users sufficient information to analyze the most significant presentation differences between financial statements prepared in accordance with U.S. GAAP and those prepared under IFRSs. Like ASU 2011-11, the amendments in this update will be effective for fiscal periods beginning on, or after January 1, 2013. The adoption of ASU 2013-01 is not expected to have a material impact on our financial position or results of operations.

In February 2013, the FASB issued ASU 2013-02, “Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income” (“ASU 2013-02”). ASU 2013-02 requires an entity to present, either on the face of the financial statements or in the notes, the effects of significant amounts reclassified out of Accumulated other comprehensive loss on the respective line items of the Consolidated Statements of (Loss) Income and to cross-reference to other required disclosures, where applicable. ASU 2013-02 is effective prospectively for reporting periods beginning after December 15, 2012, with early adoption permitted. There was no material impact to our consolidated financial position, results of operations or cash flows upon adoption of this guidance

In February 2013, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2013-04, “Obligations Resulting from Joint and Several Liability Arrangements for Which the Total Amount of the Obligation Is Fixed at the Reporting Date” (“ASU 2013-04”). ASU 2013-04 provides guidance for the recognition, measurement and disclosure of obligations resulting from joint and several liability arrangements for which the total amount of the obligation within the scope of ASU 2013-04 is fixed at the reporting date. The guidance requires an entity to measure those obligations as the sum of the amount the reporting entity agreed to pay on the basis of its arrangement among its co-obligors as well as any additional amount the reporting entity expects to pay on behalf of its co-obligors. ASU 2013-04 also requires an entity to disclose the nature and amount of those obligations. ASU 2013-04 is effective for reporting periods beginning after December 15, 2013, with early adoption permitted. Retrospective application is required. The Company is currently evaluating the impact of ASU 2013-04 on its consolidated financial statements and related disclosures.

Management does not believe that any other recently issued, but not yet effective accounting pronouncements, if adopted, would have a material effect on the accompanying consolidated financial statements.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

Item 8. Financial Statements and Supplementary Data.

See the Financial Statements annexed to this report.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

None.

Item 9A. Controls and Procedures.

Under the supervision and with the participation of our management, including the Chief Executive Officer and Chief Financial Officer, we have evaluated the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) and Rule 15d-15(e) of the Exchange Act) as of the end of the period covered by this report. Based on that evaluation, the Chief Executive Officer and Chief Financial Officer have concluded that, as of December 31, 2013, these disclosure controls and procedures were not effective to ensure that all information required to be disclosed by us in the reports that we file or submit under the Exchange Act is: (i) recorded, processed, summarized and reported, within the time periods specified in the Commission’s rule and forms; and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

There have been no material changes in internal control over financial reporting that occurred during the fourth fiscal quarter that have materially affected, or are reasonably likely to materially affect the Company’s internal control over financial reporting.

Management’s Annual Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process designed by, or under the supervision of, the Chief Executive Officer and Chief Financial Officer and effected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Our evaluation of internal control over financial reporting includes using the COSO framework, an integrated framework for the evaluation of internal controls issued by the Committee of Sponsoring Organizations of the Treadway Commission, to identify the risks and control objectives related to the evaluation of our control environment.

Based on our evaluation under the frameworks described above, our management has concluded that our internal control over financial reporting was not effective as of December 31, 2013.

Identification of a Material Weakness

A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. In connection with management’s assessment of the Company’s internal control over financial reporting, management identified the following material weakness in the Company’s internal control over financial reporting as of December 31, 2013. Management determined that at December 31, 2013, the Company had a material weakness related to its control environment because it did not maintain sufficient controls over the entry of transactions and did not receive necessary documentation to appropriately record and report a warrant which was issued in the first quarter of 2013. Although this oversight was discovered before the filing of this report, it did create a reasonable possibility that a material misstatement of our annual financial statements might not be prevented or detected on a timely basis in the future. Accordingly, we determined that this control deficiency constituted a material weakness.

Because of the material weakness described above, management has concluded that the company did not maintain effective internal control over financial reporting as of December 31, 2013, based on the Internal Control—Integrated Framework issued by COSO.

We have developed the following remediation plan to address this material weakness and we are proceeding expeditiously with measures to enhance our internal control of financial reporting:

·	Our Board of Directors has instructed management that copies of all written agreements must be provided to the Company’s outside counsel and the Company’s Chief Financial Officer promptly and prior to being executed.

·	Our Chief Financial Officer and other personnel will continue to work with our auditors and other outside advisors to ensure that our control processes and procedures are adequate and effective.

We believe that these efforts will be sufficient to fully remedy these deficiencies and will improve and strengthen our control processes and procedures.

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation requirements by the company’s registered public accounting firm pursuant to temporary rules of the Securities and Exchange Commission that permit the company to provide only management’s report in this annual report.

Item 9B. Other Information.

Not applicable.

PART III

Item 10. Directors, Executive Officers, Promoters, Control Persons and Corporate Governance.

Set forth below are our present directors and executive officers. Note that there are no other persons who have been nominated or chosen to become directors nor are there any other persons who have been chosen to become executive officers. There are no arrangements or understandings between any of the directors, officers and other persons pursuant to which such person was selected as a director or an officer. Directors are elected to serve until the next annual meeting of stockholders and until their successors have been elected and have qualified. Officers serve at the discretion of the Board of Directors.

Name	Age	Present Position and Offices	Has Served as Director Since

Dwaine Reese	71	Chairman of the Board, Chief Executive Officer and Director	January 2003

Gary B. Aman	66	President and Director	March 2005

Jack D. Cowles	53	Director	March 2005

Thomas F. Donino	52	Director	December 2005

Richard B. Dicks	66	Chief Financial Officer	-

Set forth below are brief accounts of the business experience during the past five years of each director and executive officer of the Company and each significant employee of the Company.

DWAINE REESE has been the Chairman of the Board and the Company’s Chief Executive Officer of EnerTeck Sub since 2000 and of EnerTeck Parent since 2003. From approximately 1975 to 2000, Mr. Reese held various executive, management, sales and marketing positions in the refining and specialty chemical business with Nalco Chemical Corporation and later Nalco/Exxon Energy Chemicals, LP. In 2000, he founded EnerTeck Chemical Corp., and has been its President and Chief Executive Officer since that time. Mr. Reese has been and will continue to devote his full-time to the Company’s business. Mr. Reese has B.S. degree in Biology and Chemistry from Lamar University and a M.S. degree in Chemistry from Highland New Mexico University.

GARY B. AMAN has been a director of the Company since March 2005 and President since March 2009. He has been employed with Nalco Company since 1994, most recently serving as General Manager of ADOMITE Subsurface Chemicals, a Nalco division, since 1999. ADOMITE is recognized as a technology leader in energy exploration additives including drilling fluids, cementing, fracturing and well stimulation additives. Mr. Aman retired from Nalco effective October 31, 2008. Mr. Aman received a Bachelor of Science degree in Mathematics from the University of South Dakota in 1970.

JACK D. COWLES has been a director of the Company since March 2005. He has been a Managing Director of JDC Consulting, a management consulting firm, since 1997. JDC, headquartered in New York City, provides a broad range of senior level management consulting services including strategy, business process improvement and implementation, change management, financial management, due diligence and merger integration. Mr. Cowles received a Bachelor of Arts, Economics degree; Phi Beta Kappa, from the University of Michigan in 1983 and a Masters of Business Administration degree for the University of Pennsylvania, Wharton School of Business in 1994.

THOMAS F. DONINO has been a director of the Company since December 2005. Since August 1997, he has been a partner at First New York Securities (FNY) in New York, New York. FNY is an investment management company with assets over $250 million. Mr. Donino is also the General Partner of BATL Management LP, a family Limited Partnership, and President of BATL Bioenergy LLC.

RICHARD B. DICKS has been Chief Financial Officer of the Company since December 2005. Mr. Dicks is a certified public accountant and since January 1985 has had his own accounting practice focusing on tax, financial, cash management and MAS services. In addition, from July 1993 to December 2001, Mr. Dicks was President and Chief Executive Officer of Combustion Process Manufacturing Corporation, located in Houston, Texas. Mr. Dicks received a Bachelor’s Degree from Oklahoma State University in 1969.

None of the directors and officers is related to any other director or officer of the Company.

To the knowledge of the Company, none of the officers or directors has been personally involved in any bankruptcy or insolvency proceedings. To the knowledge of the Company, none of the directors or officers have been convicted in any criminal proceedings (excluding traffic violations and other minor offenses) or are the subject of a criminal proceeding which is presently pending, nor have such persons been the subject of any order, judgment, or decree of any court of competent jurisdiction, permanently or temporarily enjoining them from acting as an investment advisor, underwriter, broker or dealer in securities, or as an affiliated person, director or insurance company, or from engaging in or continuing in any conduct or practice in connection with any such activity or in connection with the purchase or sale of any security, nor were any of such persons the subject of a federal or state authority barring or suspending, for more than 60 days, the right of such person to be engaged in any such activity, which order has not been reversed or suspended.

Audit Committee Financial Expert

We do not have an audit committee financial expert, as such term is defined in Item 407(d)(5) of Regulation S-K, serving on our audit committee because we have no audit committee and are not required to have an audit committee because we are not a listed security.

Compliance with Section 16(a) of the Exchange Act

Section 16(a) of the Securities Exchange Act of 1934 requires the Company’s directors and executive officers, and persons who own more than ten percent of the Company’s Common Stock, to file with the Securities and Exchange Commission initial reports of ownership and reports of changes of ownership of Common Stock of the Company. Officers, directors and greater than ten percent stockholders are required by SEC regulation to furnish the Company with copies of all Section 16(a) forms they file.

Based solely on the Company’s review of such forms received by it, or written representations from certain of such persons, the Company believes that, with respect to the year ended December 31, 2013, all Section 16(a) filing requirements applicable to its officers, directors and greater than 10% beneficial owners were complied with, except that each of Dwaine Reese, Gary B. Aman, Richard B. Dicks and Thomas Donino filed one report late relating to one transaction.

Code of Ethics

The Board of Directors has adopted a Code of Ethics applicable to its principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions, which is designed to promote honest and ethical conduct; full, fair, accurate, timely and understandable disclosure; and compliance with applicable laws, rules and regulations. A copy of the Code of Ethics will be provided to any person without charge upon written request to the Company at its executive offices, 10701 Corporate Drive, Suite 150, Stafford, Texas 77477.

Item 11. Executive Compensation.

The following summary compensation tables set forth information concerning the annual and long-term compensation for services in all capacities to the Company for the years ended December 31, 2013 and December 31, 2012, of those persons who were, (i) the chief executive officer and (ii) the other most highly compensated executive officers of the Company, whose annual base salary and bonus compensation was in excess of $100,000 (the named executive officers):

Summary Compensation Table

Name and Principal Position	Year	Salary ($)		Bonus ($)		Stock Awards ($)		Option Awards ($)			Non-Equity Incentive Plan Compensation ($)		Nonqualified Deferred Compensation Earnings ($)		All Other Compensation ($)		Total

Dwaine Reese, Chairman of the	2013	$	250,000	$	0	$	0	$	31,414	(1)	$	0	$	0	$	0	$	281,414
Board and Chief Executive Officer	2012	$	250,000	$	0	$	0	$	0			0		0	$	0	$	250,000

Gary B. Aman,	2013	$	200,000	$	0	$	0	$	77,326	(1)	$	0	$	0	$	0	$	277,326
President	2012	$	200,000	$	0	$	0	$	0		$	0	$	0	$	0	$	250,000

_______________________

(1)

Represents the dollar amount recognized for financial statement reporting purposes with respect to the fiscal year in accordance with ASC 718 in connection with options and warrants granted as compensation. Does not include information with respect to warrants granted to Mr. Aman as and for additional consideration for previous loans made to the Company.

Equity Awards

The following table provides certain information concerning equity awards held by the named executive officers as of December 31, 2013.

OUTSTANDING EQUITY AWARDS AT FISCAL YEAR-END

	Option Awards							Stock Awards
Name	No. of Securities Underlying Unexercised Options (#) Exercisable(1)		Number of Securities Underlying Unexercised Options (#) Unexercisable		Option Exercise Price ($)		Option Expiration Date	Number of Shares or Units of Stock That Have Not Vested (#)		Equity Incentive Plan Awards: Number of Unearned Shares, Units Or Other Rights That Have Not Vested(#)

Dwaine Reese		25,000		-0-	$	0.55	7/21/2014		-0-		-0-
		83,334		-0-	$	0.60	8/9/2016		-0-		-0-
		250,000		-0-	$	0.60	8/9/2016		-0-		-0-
		108,334		-0-	$	0.35	7/19/2018		-0-		-0-

Gary Aman		200,000		-0-	$	1.00	3/27/2014		-0-		-0-
		66,667		-0-	$	0.60	8/9/2016		-0-		-0-
		250,000		-0-	$	0.60	8/9/2016		-0-		-0-
		266,667		-0-	$	0.35	7/19/2018		-0-		-0-

__________________________

(1)	Represents options and warrants which have been issued as compensation. Does not include information with respect to warrants to acquire 100,000 shares granted to Mr. Aman in 2011 as and for additional consideration for previous loans made to the Company.

2003 Stock Option Plan

In September 2003, our shareholders approved an employee stock option plan (the “2003 Option Plan”) authorizing the issuance of options to purchase up to 1,000,000 shares of our common stock. In 2013, the number of shares of common stock reserved for issuance under the 2003 Option Plan was increased from 1,000,000 to 1,250,000 shares of common stock. This plan is intended to give us greater ability to attract, retain, and motivate officers, key employees, directors and consultants; and is intended to provide us with the ability to provide incentives more directly linked to the success of our business and increases in shareholder value. As of December 31, 2007, no options have been issued under the 2003 Option Plan. During the first quarter of 2008, options to acquire 64,200 shares at an exercise price of $0.80 per share were issued to five employees which options expired in 2013. During the first quarter of 2009, options to acquire 200,000 shares at an exercise price of $1.00 per share was issued to one employee which option expires March 27, 2014. During the third quarter of 2009, options to acquire 64,000 shares at an exercise price of $0.55 per share were issued to five employees, and during the third quarter of 2011, options to acquire 225,001 shares at an exercise price of $0.60 per share were issued to four employees. During the third quarter of 2013, options to acquire 474,201 shares at an exercise price of $0.35 per share were issued under our 2003 Stock Option Plan to four employees. All of the outstanding options are immediately exercisable as of the issue date and expire five years thereafter.

2005 Stock Compensation Plan

In June 2005, the Board of Directors adopted the 2005 Stock Compensation Plan (the “2005 Stock Plan”) authorizing the issuance of up to 2,500,000 shares of common stock. Pursuant to the 2005 Stock Plan, employees, directors, officers or individuals who are consultants or advisors of the Company or any subsidiary may be awarded shares under the 2005 Stock Plan. The 2005 Stock Plan is intended to offer those employees, directors, officers, or consultants or advisors of the Company or any subsidiary who assist in the development and success of the business of the Company or any subsidiary, the opportunity to participate in a compensation plan designed to reward them for their services and to encourage them to continue to provide services to the Company or any subsidiary. In 2005, 2,000,000 shares were awarded under the 2005 Stock Plan, 500,000 of which were returned to the Company in December 2005, and 50,000 shares were awarded in 2006. Since then, no additional awards have been granted under the 2005 Stock Plan.

Other Options, Warrants or Rights

We have no other outstanding options or rights to purchase any of our securities. However, as of December 31, 2013, we do have outstanding warrants to purchase up to 4,256,667 shares of our common stock. In addition, we do have outstanding convertible notes which are convertible into shares of our common stock under certain conditions.

Employment Agreements - Executive Officers and Certain Significant Employees

On March 27, 2009, the Company entered into an employment agreement with Gary B. Aman, effective as of January 1, 2009, pursuant to which Mr. Aman agreed to be employed by the Company as President for a period of two years. During the period of employment, Mr. Aman shall receive an annual base salary equal to $200,000, subject to review each year for possible increases, provided, however, that Mr. Aman has agreed to accrual of said salary until the earlier of (i) such time that the Company’s financial condition improves so that payment of said salary does not cause undue financial burden to the Company which shall be determined by the Board of Directors at its sole discretion, or (ii) January 1, 2010. Mr. Aman shall also be entitled to participate in any long term and annual incentive plans and arrangements presently existing or as may be adopted from time to time and other employee benefits plans and programs on the same basis generally as other employees of the Company. Although such employment agreement terminated as of December 31, 2010, Mr. Aman has continued as President of the Company.

Pursuant to the employment agreement, the Company also agreed to grant Mr. Aman an option to purchase 200,000 shares of Common Stock of the Company at an exercise price of $1.00 per share which option shall be 25% vested as of the date of grant (March 27, 2009), shall become 100% vested on January 1, 2010 and shall expire March 27, 2014.

As of December 31, 2013, none of our officers and key employees are bound by employment agreements.

We do not have any termination or change in control arrangements with any of our named executive officers.

Compensation of Directors

At the present time, directors receive no cash compensation for serving on the Board of Directors, other than reimbursement of reasonable expenses incurred in attending meetings.

The following table provides certain summary information concerning the compensation paid to the Company’s non-employee directors during fiscal 2013 for their services as such. All compensation paid to Mr. Reese and Mr. Aman is set forth in the Summary Compensation table above.

Director Compensation

Name	Fees Earned or Paid in Cash ($)		Stock Awards (S)		Option Awards ($)		All Other Compensation ($)		Total ($)

Jack D. Cowles	$	0		-0-	$	0	$	0	$	0
Thomas F. Donino	$	0		-0-	$	0	$	0	$	0

Indebtedness of Management

No member of management was indebted to the Company during its last fiscal year.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The following table sets forth, as of December 31, 2013, certain information with regard to the beneficial ownership of the Company’s Common Stock by (i) each stockholder owning beneficially 5% or more of the Company’s Common Stock, (ii) each director of the Company, (iii) the Company’s Chief Executive Officer and other executive officers, if any, of the Company whose total compensation was in excess of $100,000 (the “named executive officers”), and (iv) all executive officers and directors of the Company as a group:

Name of Beneficial Owner	Amount and Nature of Beneficial Ownership			Percent of Class(1)

Dwaine Reese		4,031,668	(2)		15.9	%
Thomas F. Donino		8,473,712	(3)		30.9	%
Gary B. Aman		1,553,334	(4)		6.0	%
Jack D. Cowles		648,550	(5)		2.6	%
Richard B. Dicks		228,400	(6)		*
All Executive Officers and Directors as a Group (5 persons)		14,935,664			51.0	%

___________________

*	Less than 1%.

(1)	Based upon 24,897,341 shares of common stock outstanding as of December 31, 2013.

(2)	Consists of 3,565,000 shares held by Mr. Reese, 216,668 shares underlying options granted to him and 250,000 shares underlying warrants held by Mr. Reese. The address for Mr. Reese is 10701 Corporate Drive, Suite 150, Stafford, Texas.

(3)

Consists of 2,921,154 shares held by Mr. Donino individually or jointly with his wife; 32,758 shares held by Mr. Donino as custodian for his children; 2,450,000 shares held by BATL Bioenergy LLC (“BATL”); 531,300 shares held by BATL Management LP (“BATL Management”); 1,510,000 shares underlying warrants held by BATL; 275,000 shares underlying warrants held by BATL Management; and, 753,500 shares underlying warrants held by Mr. Donino. Does not include shares which may be acquired upon conversion of convertible promissory notes held by Mr. Donino and BATL as well as shares which have not been issued to date for $175,000 advanced to the Company by Mr. Donino in 2013 to be applied to stock subscriptions expected to be issued in 2014. See “Certain Relationships and Transactions and Corporate Governance”. As the president and managing member of BATL and the sole officer, director and shareholder of BATL Management’s general partner, Mr. Donino may be deemed to be the beneficial owner of shares owned by BATL and BATL Management. BATL Management is a family limited partnership whose members are certain relatives and trusts for the benefit of certain relatives of Mr. Donino. This information is based solely upon information reported in filings made to the SEC on behalf of Thomas Donino, BATL and BATL Management. The address for Mr. Donino is 7 Lakeside Drive, Rye, New York.

(4)	Consists of 670,000 shares held by Mr. Aman, 533,334 shares underlying options granted to him and 350,000 shares underlying warrants held by Mr. Aman. The address for Mr. Aman is 10701 Corporate Drive, Suite 150, Stafford, Texas.

(5)	Consists of 398,550 shares held by Mr. Cowles and 250,000 shares underlying warrants held by him. The address for Mr. Cowles is 30 Lansdowne Drive, Larchmont, New York.

(6)	Consists of 128,400 shares underlying options and 100,000 shares underlying warrants held by him. The address for Mr. Dicks is 10701 Corporate Drive, Suite 150, Stafford, Texas.

Item 13. Certain Relationships and Related Transactions, and Director Independence.

On July 7, 2009, the Company entered into a $100,000 unsecured promissory note with Gary B. Aman, the Company’s President and a director, due on demand. Interest is payable at 12% per annum.

On December 11, 2009, the Company entered into a $50,000 note with Thomas Donino, a director. Interest is 5% per annum. The principal balance of the note is due on the earlier of December 11, 2012, or upon completion by the Company of equity financing in excess of $1.0 million in gross proceeds. Interest on the loan is payable on the maturity date at the rate of 5% per annum. This note is now overdue for payment.

On June 1, 2010, the Company entered into a $50,000 convertible promissory note with Mr. Donino which shall be due and payable on June 1, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. The assignment of the conversion feature of the note resulted in a loan discount being recorded. The discount amount of $36,207 is being amortized over the original thirty-six month term of the debt as additional interest expense. Amortization for this loan was $12,069 and $7,000 for the years ended December 31, 2012 and 2011. This note is now overdue for payment.

On June 1, 2010, the Company entered into a $300,000 convertible promissory note with Mr. Donino which shall be due and payable on June 1, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On July 20, 2010, the Company entered into $400,000 of convertible promissory notes with Mr. Donino and his affiliates which shall be due and payable on July 20, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On December 10, 2010, the Company entered into $150,000 of convertible promissory notes with Mr. Donino and his affiliates which shall be due and payable on December 10, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On October 20, 2011, the Company entered into a $70,000 convertible promissory note with Mr. Donino which shall be due and payable on October 20, 2014 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock.

In addition, during 2010, 2011 and 2012, Mr. Donino and his affiliates advanced the Company $150,000, $150,000 and $320,000 respectively. Such advances are due on demand and bear interest at 5%, 8% and 8% per annum respectively, and may be converted at any time into shares of common stock.

During 2013, Mr. Donino advanced $175,000 to the Company to be applied to stock subscriptions expected to be issued in 2014. Such advances do not bear interest.

Other than the foregoing, since January 1, 2013, there has not been, nor is there currently proposed, any transaction or series of similar transactions to which we were or will be a party: (i) in which the amount involved exceeds the lesser of $120,000 or one percent of the average of our total assets at year-end for the last three completed fiscal years; and (ii) in which any director, executive officer, shareholder who beneficially owns 5% or more of our common stock or any member of their immediate family had or will have a direct or indirect material interest.

Director Independence

Our board of directors currently consists of four members. They are Dwaine Reese, Gary B. Aman, Jack D. Cowles and Thomas F. Donino. Mr. Reese is the Company’s Chairman of the Board and Chief Executive Officer, and Mr. Aman is the Company’s President. Messrs. Cowles and Donino are independent directors. We have determined their independence using the general independence criteria set forth in the Nasdaq Marketplace Rules.

Item 14. Principal Accountant Fees and Services.

The following is a summary of the fees billed to us by the principal accountants to the Company for professional services rendered for the fiscal years ended December 31, 2013 and December 31, 2012:

Fee Category	2013 Fees		2012 Fees

Audit Fees	$	34,300	$	37,079
Audit Related Fees	$	0	$	0
Tax Fees	$	0	$	0
All Other Fees	$	0	$	0

Total Fees	$	34,300	$	37,079

Audit Fees. Consists of fees billed for professional services rendered for the audit of our financial statements and review of interim consolidated financial statements included in quarterly reports and services that are normally provided by the principal accountants in connection with statutory and regulatory filings or engagements.

Audit Related Fees. Consists of fees billed for assurance and related services that are reasonably related to the performance of the audit or review of our consolidated financial statements and are not reported under “Audit Fees”.

Tax Fees. Consists of fees billed for professional services for tax compliance, tax advice and tax planning. These services include preparation of federal and state income tax returns.

All Other Fees. Consists of fees for product and services other than the services reported above.

Pre-Approval Policies and Procedures

Prior to engaging its accountants to perform a particular service, the Company’s Board of Directors obtains an estimate for the service to be performed. All of the services described above were approved by the Board of Directors in accordance with its procedures.

PART IV

Item 15. Exhibits and Financial Statement Schedules.

The following documents are filed as part of this report:

(1)	Financial Statements

Financial Statements are annexed to this report.

(2)	Financial Statement Schedules

No financial statement schedules are included because such schedules are not applicable, are not required, or because required information is included in the financial statements or notes thereto.

(3)

Exhibits

		Incorporated by Reference to

2.1	Share Exchange Agreement	Exhibit 2.1 (1)

2.2	Plan of Merger	Exhibit 2.2 (2)

2.3	Article of Merger (Delaware)	Exhibit 2.3 (2)

2.4	Articles of Merger (Washington)	Exhibit 2.4 (2)

3.1	Articles of Incorporation (July 8, 2003 filing date)	Exhibit 3.1 (2)

3.2	Bylaws	Exhibit 3.2 (2)

4.1	Specimen of Common Stock Certificate	Exhibit 4.1 (2)

4.3	Registrant’s 2005 Stock Compensation Plan	Exhibit 99.1 (4)

4.4	Form of Common Stock Purchase Warrant granted to various persons at various times from August 2003 to date	Exhibit 4.4 (5)

4.5	Registration Rights Agreement dated December 8, 2005 between the Company and BATL Bioenergy LLC	Exhibit 4.1 (6)

4.6	Warrant to purchase 1,000,000 shares issued to BATL Bioenergy LLC	Exhibit 4.2 (6)

10.1	Office Lease dated February 1, 2001	Exhibit 10.23 (2)

10.2	Office Lease Amendment dated March 31, 2003	Exhibit 10.24 (2)

10.3	Second Amendment to Lease Agreement	Exhibit 10.4 (7)

10.4	Third Amendment to Lease Agreement	Exhibit 10.5 (7)

10.5	Fourth Amendment to Lease Agreement	Exhibit 10.5 (11)

10.6	Fifth Amendment to Lease Agreement	Exhibit 10.5 (12)

10.7	Securities Purchase Agreement dated December 8, 2005 between the Company and BATL Bioenergy LLC	Exhibit 10.2 (6)

10.8	Asset Purchase Agreement dated as of July 13, 2006	Exhibit 2.1 (8)

10.9	Exclusive Reseller and Market Development Alliance With Custom Fuel Services, Inc.	Exhibit 10.10 (9)

10.10	Employment Agreement with Gary B. Aman dated March 27, 2009	Exhibit 99.1 (10)

10.11	Investment Agreement dated as of July 15, 2011 by and between the Company and Kodiak Capital Group, LLC	Exhibit 10.1 (13)

10.12	Registration Rights Agreement dated as of July 15, 2011 by and between the Company and Kodiak Capital Group, LLC	Exhibit 10.2 (13)

21.1	Subsidiaries of the Registrant	Exhibit 21.1 (7)

23.1	Consent of Philip Vogel & Co. PC	*

31.1	Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (Rules 13a-14 and 15d-14 of the Exchange Act)	*

31.2	Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (Rules 13a-14 and 15d-14 of the Exchange Act)	*

32.1	Certification pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (18 U.S.C. 1350)	*

101**	The following financial information from our Annual Report on Form 10-K for the year ended December 31, 2013 formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Operations, (iii) the Consolidated Statement of Stockholders’ Equity, (iv) the Consolidated Statements of Cash Flows, and (v) Notes to Consolidated Financial Statements	*

_________________

*	Filed herewith.

In accordance with Rule 406T of Regulation S-T, the XBRL information in Exhibit 101 to this annual report on Form 10-K shall not be deemed to be “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (“Exchange Act”), or otherwise subject to the liability of that section, and shall not be incorporated by reference into any registration statement or other document filed under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such filing.

(1)	Filed as an exhibit to the Company’s Current Report on Form 8-K filed on January 23, 2003, and incorporated by reference herein.

(2)	Filed as an exhibit to the Company’s Registration Statement on Form SB-2, File No. 333-108872, and incorporated by reference herein.

(3)	Filed as an exhibit to the Company’s Schedule 14A filed on August 12, 2003, and incorporated by reference herein.

(4)	Filed as an exhibit to the Company’s Registration Statement on Form S-8, File No. 333-1258814, and incorporated by reference herein.

(5)	Filed as an exhibit to the Company’s Annual Report on Form 10-KSB for the year ended December 31, 2005, and incorporated by reference herein.

(6)	Filed as an exhibit to the Company’s Current Report on Form 8-K filed on December 12, 2005, and incorporated by reference herein.

(7)	Filed as an exhibit to the Company’s Annual Report on Form 10-KSB for the year ended December 31, 2006, and incorporated by reference herein.

(8)	Filed as an exhibit to the Company’s Current Report on Form 8-K filed on July 19, 2006, and incorporated by reference herein.

(9)	Filed as an exhibit to Amendment No. 3 to the Company’s Registration Statement on Form SB-2 filed as Form S-1/A on March 25, 2008, File No. 333-133651, and incorporated by reference herein.

(10)	Files as an exhibit to the Company’s Current Report on Form 8-K filed on April 2, 2009, and incorporated by reference herein.

(11)	Filed as an exhibit to the Company’s Annual Report on Form 10-K for the year ended December 31, 2010, and incorporated by reference herein.

(12)	Filed as an exhibit to the Company’s Annual Report on Form 10-K for the year ended December 31, 2010, and incorporated by reference herein.

(13)	Filed as an exhibit to the Company’s Current Report on Form 8-K filed on July 20, 2011, and incorporated by reference herein.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

	ENERTECK CORPORATION (Registrant)

Dated: April 14, 2014	By:	/s/ Dwaine Reese
		Dwaine Reese,
		Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant, and in the capacities and on the dates indicated:

Signature	Title	Date

/s/ Dwaine Reese	Chief Executive Officer,	April 14, 2014
Dwaine Reese	Chairman of the Board and Director (Principal Executive Officer)

/s/ Richard B. Dicks	Chief Financial Officer	April 14, 2014
Richard B. Dicks	(Principal Financial Officer)

/s/ Gary B. Aman	President and Director	April 14, 2014
Gary B. Aman

/s/ Jack D. Cowles	Director	April 14, 2014
Jack D. Cowles

/s/ Thomas F. Donino	Director	April 14, 2014
Thomas F. Donino

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors

EnerTeck Corporation

Houston, Texas

We have audited the accompanying consolidated balance sheets of EnerTeck Corporation and subsidiary as of December 31, 2013 and 2012, and the related consolidated statements of operations, of changes in stockholders' equity (deficit) and of cash flows for each of the years in the two-year period ended December 31, 2013. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement. The company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of EnerTeck Corporation and subsidiary as of December 31, 2013 and 2012, and the consolidated results of their operations and their cash flows for each of the years in the two-year period ended December 31, 2013, in conformity with accounting principles generally accepted in the United States of America.

	PHILIP VOGEL & CO. PC

	/s/ Philip Vogel & Co. PC

	Certified Public Accountants
Dallas, Texas April 11, 2014

F-1

ENERTECK CORPORATION AND SUBSIDIARY

CONSOLIDATED BALANCE SHEET

December 31, 2013 and 2012

	2013			2012
ASSETS
Current assets
Cash	$	8,797		$	24,324
Inventory		254,724			306,596
Receivables - trade		76,125			91,134
Prepaid Expenses		11,637			11,250
Total current assets		351,283			433,304

Intellectual Property		150,000			150,000
Property and equipment, net of accumulated depreciation of $ 343,627 and $308,379 respectively		21,692			55,377

Total assets	$	522,975		$	638,681

LIABILITIES AND STOCKHOLDERS’ EQUITY (DEFICIT)

Current liabilities
Accounts payable	$	146,247		$	238,863
Stockholder advances and notes		2,015,000			1,627,981
Accrued compensation		2,254,632			1,854,935
Accrued interest		515,249			334,623
Accrued liabilities - other		54,743			118,904
Total current liabilities	$	4,985,871		$	4,175,306

Long Term Liabilities
Stockholder advances and notes		0			70,000
Deferred lease liability		3,210			7,119
Total Long Term Liabilities	$	3,210		$	77,119

Stockholders’ Equity (Deficit)
Preferred stock, $.001 par value, 100,000,000 shares authorized, none issued
Common stock, $.001 par value, 100,000,000 shares authorized, 24,983,055 and 23,224,517 shares issued and outstanding, respectively		24,983			23,225
Common stock subscribed, 75,000 shares		37,500			37,500
Additional paid-in capital		25,284,768			24,433,521
Accumulated deficit		(29,813,357	)		(28,107,990	)
Total stockholders’ equity (deficit)	$	(4,466,106	)	$	(3,613,744	)

Total liabilities and stockholders’ equity (deficit)	$	522,975		$	638,681

See accompanying summary of accounting policies and notes to financial statements.

F-2

ENERTECK CORPORATION AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF OPERATIONS

Years Ended December 31, 2013 and 2012

	2013			2012

Product Sales	$	278,314		$	125,608
Cost of goods sold		66,909			42,101
Gross profit	$	211,405		$	83,507

Costs and expenses:
General and Administrative Expenses:
Wages	$	797,545		$	721,298
Non-cash compensation		137,505			0
Depreciation and Amortization		35,248			47,742
Other Selling, General and Administrative Expenses		600,012			612,502
Total Expenses	$	1,570,310		$	1,381,542
Operating loss	$	(1,358,905	)	$	(1,298,035	)

Other income (expense)
Interest Income	$	6		$	15
Other Income (Expense)		(20,504	)		427
Interest expense		(325,964	)		(313,947	)
Net Income (loss)	$	(1,705,367	)	$	(1,611,540	)

Net loss per share: Basic and diluted	$	(0.07	)	$	(0.07	)
Weighted average shares outstanding: Basic and diluted		24,413,811			23,080,841

See accompanying summary of accounting policies and notes to financial statements.

F-3

ENERTECK CORPORATION AND SUBSIDIARY

CONSOLIDATED STATEMENT OF STOCKHOLDERS' EQUITY

Years Ended December 31, 2013 and 2012

					Common			Additional
	Common Stock				Stock			Paid-in		Accum’d
	Shares		Amount		Subscribed			Capital		Deficit			Total

Balances, December 31, 2012		22,419,683	$	22,420	$	175,000		$	24,118,226	$	(26,496,450	)	$	(2,180,804	)
Common stock issued		275,000		275		(137,500	)		137,225					0
Sale of Stock		333,334		333					99,667					100,000
Stock based compensation		196,500		197					78,403					78,600
Current Loss 12/31/2012											(1,611,540	)		(1,611,540	)
Balances, December 31, 2012		23,224,517	$	23,225	$	37,500		$	24,433,521	$	(28,107,990	)	$	(3,613,744	)

Warrants issued for Services									100,000					100,000
Stock issued for prior services		57,142		57					19,943					20,000
Sale of Stock		1,701,397		1,701					593,799					595,500
Stock based compensation									137,505					137,505
Current Loss 12/31/2013											(1,705,367	)		(1,705,367	)

Balances, December 31, 2013		24,983,056	$	24,983	$	37,500		$	25,284,768	$	(29,813,357	)	$	(4,466,106	)

See accompanying summary of accounting policies and notes to financial statements.

F-4

ENERTECK CORPORATION AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CASH FLOWS

Years Ended December 31, 2013 and 2012

	2013			2012

Net (loss)	$	(1,705,367	)	$	(1,611,540	)
Adjustments to reconcile net loss to cash used in operating activities:
Depreciation and Amortization		177,267			209,727
Common stock warrants and options issued for services		237,505			78,403
Changes in operating assets and liabilities:
Accounts receivable		15,009			108,940
Inventory		51,872			(63,607	)
Prepaid expenses		(387	)		0
Accounts payable		(72,616	)		(197,885	)
Accrued Interest payable		180,626			151,881
Accrued Liabilities		331,627			561,080
NET CASH USED IN OPERATING ACTIVITIES	$	(784,464	)	$	(763,000	)

CASH FLOWS FROM INVESTING ACTIVITIES
Capital Expenditures	$	(1,563	)	$	(6,602	)
CASH USED IN INVESTING ACTIVITIES	$	(1,563	)	$	(6,602	)

CASH FLOWS FROM FINANCING ACTIVITIES
Proceeds from sales of common stock	$	595,500		$	100,197
Related party note payable and advances		175,000			320,000
CASH PROVIDED BY FINANCING ACTIVITIES	$	770,500		$	420,197

NET DECREASE IN CASH AND CASH EQUIVALENTS	$	(15,527	)	$	(349,405	)
Cash and cash equivalents, beginning of year		24,324			373,729
Cash and cash equivalents, end of year	$	8,797		$	24,324
Cash paid for:
Income tax	$	0		$	0
Interest	$	3,319		$	0

See accompanying summary of accounting policies and notes to financial statements.

F-5

ENERTECK CORPORATION and SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Business and Basis of Presentation

EnerTeck Sub, the Company's wholly owned operating subsidiary is a Houston-based corporation. It was incorporated in the State of Texas on November 29, 2000 and was formed for the purpose of commercializing a diesel fuel specific combustion catalyst known as EnerBurn (TM), as well as other combustion enhancement and emission reduction technologies for diesel fuel. EnerTeck's primary product is EnerBurn, and is registered for highway use in all USA diesel applications. The products are used primarily in on-road vehicles, locomotives and diesel marine engines throughout the United States and select foreign markets.

During 2012, EnerTeck acquired a 40% membership interest in EnerTeck Environmental, LLC (Environmental). Environmental was formed for the purpose of marketing and selling diesel fuel emission reduction technology with the creators of such specific technology. Environmental is working with Ingram Barge and is in the process of testing the prototype of the patent pending PEx technology for marine diesel engines. Testing was completed late in the fourth quarter of 2013. The results are now in the hands of the testing company for final analysis and the PEx technology is pending approval from the California Air Resources Board (CARB).

Principles of Consolidation

Cash and Cash Equivalents

The Company considers all highly liquid investments purchased with an original maturity of three (3) months or less to be cash and cash equivalents.

Inventory

Inventory primarily consists of market ready EnerBurn plus raw materials required to manufacture the products. Inventory has been valued at the lower of cost or market, using the average cost method.

Finished product amounted to approximately $72,000 and $95,000 at December 31, 2013 and 2012, respectively: the remaining inventory comprises raw materials.

F-6

Accounts Receivable

Accounts receivable represent uncollateralized obligations due from customers of the Company and are recorded at net realizable value. This value includes an appropriate allowance for estimated uncollectible accounts to reflect any loss anticipated on the accounts receivable balances and charged to the provision for doubtful accounts. The Company calculates this allowance based on historical write-offs, level of past due accounts and relationships with and economic status of the customers. Accounts are written off as bad debts when all collection efforts have failed and the account is deemed uncollectible. Management has provided allowances for doubtful accounts of $9,863 as of December 31, 2013 and 2012.

Property and Equipment

Intangible Assets

Intellectual property and other intangibles are recorded at cost. Prior to 2009, the Company determined that its intellectual property had an indefinite life because it believed there was no legal, regulatory, contractual, competitive, economic or other factor to limit its useful life, and therefore would not be amortized. For other intangibles, amortization would be computed on the straight-line method over the identifiable lives of the assets. Management made the decision during 2009 to change the characterization of its intellectual property to a finite-lived asset and to amortize the remaining balance of its intangible assets to the nominal value of $150,000 by the end of 2012, due to its determination that this now represented the scheduled end of its exclusive registration during that year.

As a result of a review by management of its intangible asset and policies related thereto as of December 31, 2010, it was determined that a further impairment was required to be recorded. This impairment served to reduce its intellectual property to an amount which management believes represents its fair value. This value would be considered a level 3 measurement under FASB ASC 820, Fair Value Measurements and Disclosures, since it is based on significant unobservable inputs. The Company will re-assess the value of this asset in future periods and make adjustments as considered necessary, rather than record additional amortization. No adjustment was considered necessary during the years ended December 31, 2013 and 2012.

Revenue Recognition

Revenues from sales of product and equipment are recognized at the point when a customer order has been shipped and invoiced.

F-7

Income Taxes

EnerTeck will compute income taxes using the asset and liability method. Under the asset and liability method, deferred income tax assets and liabilities are determined based on the differences between the financial reporting and tax bases of assets and liabilities and are measured using the currently enacted tax rates and laws. A valuation allowance is provided for the amount of deferred tax assets that, based on evidence from prior years, may not be realized over the next calendar year or for some years thereafter.

Income (Loss) Per Common Share

The basic net income (loss) per common share is computed by dividing the net income (loss) applicable to common stockholders by the weighted average number of common shares outstanding.

Diluted net income (loss) per common share is computed by dividing the net income (loss) applicable to common stockholders, adjusted on an "as if converted" basis, by the weighted average number of common shares outstanding plus potential dilutive securities. For 2013 and 2012, potential dilutive securities had an anti-dilutive effect and were not included in the calculation of diluted net loss per common share.

Management Estimates and Assumptions

Financial Instruments

The Company’s financial instruments recorded on the balance sheet include cash and cash equivalents, accounts receivable, accounts payable and notes payable. The carrying amounts approximate fair value because of the short-term nature of these items.

Stock Options and Warrants

Effective January 1, 2006, EnerTeck began recording compensation expense associated with stock options and other forms of equity compensation in accordance with FASB ASC 718, Stock Compensation

F-8

Taxes Collected

Recently Issued Accounting Pronouncements

In February 2013, the FASB issued ASU 2013-02, "Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income" ("ASU 2013-02"). ASU 2013-02 requires an entity to present, either on the face of the financial statements or in the notes, the effects of significant amounts reclassified out of Accumulated other comprehensive loss on the respective line items of the Consolidated Statements of (Loss) Income and to cross-reference to other required disclosures, where applicable. ASU 2013-02 is effective prospectively for reporting periods beginning after December 15, 2012, with early adoption permitted. There was no material impact to our consolidated financial position, results of operations or cash flows upon adoption of this guidance

In February 2013, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") 2013-04, "Obligations Resulting from Joint and Several Liability Arrangements for Which the Total Amount of the Obligation Is Fixed at the Reporting Date" ("ASU 2013-04"). ASU 2013-04 provides guidance for the recognition, measurement and disclosure of obligations resulting from joint and several liability arrangements for which the total amount of the obligation within the scope of ASU 2013-04 is fixed at the reporting date. The guidance requires an entity to measure those obligations as the sum of the amount the reporting entity agreed to pay on the basis of its arrangement among its co-obligors as well as any additional amount the reporting entity expects to pay on behalf of its co-obligors. ASU 2013-04 also requires an entity to disclose the nature and amount of those obligations. ASU 2013-04 is effective for reporting periods beginning after December 15, 2013, with early adoption permitted. Retrospective application is required. The Company is currently evaluating the impact of ASU 2013-04 on its consolidated financial statements and related disclosures.

NOTE 2 - PROPERTY AND EQUIPMENT

At December 31, 2013 and 2012 property and equipment consisted of the following:

	Useful Lives		2013 Amount			2012 Amount

Furniture and fixtures		5-7	$	63,585		$	62,022
Equipment		5-7		301,734			301,734
Less: Accumulated Depreciation				(343,627	)		(308,379	)

Net Property and Equipment			$	21,692		$	55,377

F-9

NOTE 3 - INTELLECTUAL PROPERTY

In July 2006, EnerTeck acquired the EnerBurn technology. The purchase price for the EnerBurn technology is as follows: (i) $1.0 million cash paid on July 13, 2006, and (ii) a promissory note for $2.0 million. In May of 2007, we made the initial payment of $500,000 plus interest against the loan. Prior to 2009 EnerTeck had determined that the life of the intellectual property was indefinite; therefore, the asset was not amortized. The Company tested its intangible assets for impairment as of December 31, 2008. As a result of an independent examination based on sales for the year ended December 31, 2008, the Company determined that an impairment of the asset in the amount of $825,000 was required to be recorded.

Management made the decision during 2009 to change the characterization of its intellectual property to a finite-lived asset and to amortize the remaining balance of its intangible assets to the nominal value of $150,000 by the end of 2013, due to its determination that this now represents the scheduled end of its exclusive registration during that period. As a result, amortization expense of approximately $579,000 was recorded for the years ended December 31, 2010 and zero for 2011, 2012 and 2013.

Management made the decision effective December 31, 2010 to record an additional impairment of the asset in the amount of $868,000 as a result of the Company’s inability to generate sufficient sales to support its previously recorded amount. This impairment adjustment results in a value of $150,000 being placed on the Company's intellectual property, which management believes is adequately supported by existing levels of sales and market data.

NOTE 4 - INCOME TAXES

EnerTeck has incurred net losses since the merger with Gold Bond and, therefore, has no tax liability. The net deferred tax asset generated by the loss carry-forward has been fully reserved. The cumulative operating loss carry-forward is approximately $16,940,000 at December 31, 2013, and expires beginning in 2023.

Deferred income taxes consist of the following at December 31, 2013 and 2012:

	2013			2012
Assets:
Net operating loss carryforwards	$	5,929,000		$	5,489,000
Other asset differences		158,000			199,000
Deferred compensation costs and other		1,141,000			1,238,000
Valuation allowance		(7,228,000	)		(6,926,000	)
	$	0		$	0

The change in the valuation allowance for the years ended December 31, 2013 and 2012, was $302,000 and $645,000, respectively.

NOTE 5 - STOCKHOLDERS' EQUITY

During the first quarter of 2011, the Company received an advance of $125,000 in gross proceeds for 250,000 shares of common stock at $.50 per share from three investors in a private placement offering to accredited investors only. Such shares were not issued during 2011. This amount has been reported as common stock subscribed in the accompanying balance sheet at December 31, 2011 pending completion of the subscription agreements and/or issuance of the shares. During the first quarter of 2012, the Company issued 175,000 shares to two of such investors in connection with gross proceeds of $87,500. Pending completion of the subscription agreement from the third investor, the balance of 75,000 shares will be issued in connection with the remaining gross proceeds of $37,500.

F-10

During the first quarter of 2012, the Company sold to one accredited investor in a private placement offering 166,667 units at $0.60 per unit with each unit consisting of two shares of common stock and one common stock purchase warrant. Each warrant is exercisable into one share of common stock at $0.50 per share.

During the third quarter of 2012, the Company sold 196,500 shares of common stock to an unrelated third party for $196.50 in cash which shares were issued pursuant to the terms of a consulting agreement entered into as of June 1, 2012. The value of the consulting services was determined to be $78,600, which amount was expensed upon issuance in September 2012.

During the first quarter of 2013, the Company issued 57,142 shares of common stock for prior legal services rendered in the amount of $20,000.

During the first quarter of 2013, the Company sold to three accredited investors in a private placement offering 571,414 units at $0.70 per unit or $400,000 cash in the aggregate with each unit consisting of two shares of common stock.

During the second quarter of 2013, the Company sold to three accredited investors in a private placement offering 222,142 units at $0.70 per unit or $155,500 cash in the aggregate with each unit consisting of two shares of common stock of the Company.

During the third quarter of 2013, the Company sold to an accredited investor in a private placement offering 14,285 units at $0.70 per unit or $10,000 cash in the aggregate with each unit consisting of two shares of common stock of the Company.

During the fourth quarter of 2013, the Company sold to two accredited investors in a private placement offering 42,857 units at $0.70 per unit or $30,000 cash in the aggregate with each unit consisting of two shares of common stock of the Company. Such proceeds have been recorded as common stock as the shares were issued in the first quarter of 2014.

NOTE 6 - STOCK WARRANTS AND OPTIONS

Stock Warrants

During the first quarter of 2012, the Company issued to one accredited investor 166,667 warrants in connection with a private placement offering of 166,667 units at $0.60 per unit with each unit consisting of two shares of common stock and one common stock purchase warrant. Each warrant is exercisable into one share of common stock at $0.50 per share.

During the first quarter of 2013, the Company issued to a consultant 400,000 warrants for services to be rendered with regards to the fund raising required for the Company to meet its upcoming requirements for operating funds and for extended testing with several potential new customers. Each warrant is exercisable into one share of common stock at $0.25 per share.

F-11

Other than the foregoing, there were no other warrants granted or exercised for the years ended December 31, 2013 and 2012. A total of 400,048 and zero warrants expired for the years ended December 31, 2013 and 2012, respectively. Warrants outstanding and exercisable as of December 31, 2013:

Exercise Price		Number of Warrants		Weighted Average Remaining Life		Exercisable Number of Warrant

$	0.60		3,590,000		2.5		3,590,000
$	0.75		100,000		2.7		100,000
$	0.50		166,667		3.0		166,667
$	0.25		400,000		6.0		400,000
			4,256,667				4,256,667

Stock Options

In September 2003, shareholders of the Company approved an employee stock option plan (the “2003 Option Plan”) authorizing the issuance of options to purchase up to 1,000,000 shares of common stock. The 2003 Option Plan is intended to give the Company greater ability to attract, retain, and motivate officers, key employees, directors and consultants; and is intended to provide the Company with the ability to provide incentives more directly linked to the success of the Company’s business and increases in shareholder value.

During the third quarter of 2013, the board of directors increased the number of shares reserved for issuance under the 2003 Option Plan from 1,000,000 to 1,250,000 and approved the issuance of 474,201 additional employee stock options to cover services for the years 2012 and 2013. These options have an exercise price of $0.35 per share and expire in five years from their issue date.

The fair value of options at the date of grant was $137,505 and was recognized as non-cash compensation for the year ended December 31, 2013, as estimated using the Black-Scholes Model with the following weighted average assumptions for fiscal year 2013:

	2013			2012

Expected dividend yield		0.0	%		N/A
Expected term	5.0 yrs				N/A
Expected volatility		350	%		N/A
Risk-free interest rate		1.3	%		N/A
Fair value per option	$	.29			N/A

The fair value of warrants issued in 2013 at the date of grant was $100,000 and was recognized as non-cash compensation for the year ended December 31, 2013, as estimated using the Black-Scholes Model with the following weighted average assumptions for fiscal year 2013:

	2013			2012

Expected dividend yield		0.0	%		N/A
Expected term	7.0 yrs				N/A
Expected volatility		279	%		N/A
Risk-free interest rate		1.0	%		N/A
Fair value per warrant	$	.25			N/A

F-12

The expected term of the options and warrants represents the estimated period of time until exercise and is based on the Company’s historical experience of similar option grants, giving consideration to the contractual terms, vesting schedules and expectations of future employee behavior. For fiscal 2013, expected stock price volatility is based on the historical volatility of our stock. The risk-free interest rate is based on the U.S. Treasury bill rate in effect at the time of grant with an equivalent expected term or life. The Company has not paid dividends in the past and does not currently plan to pay any dividends in the future.

Information regarding activity for stock options under our plan is as follows:

	2013					2012
	Number of shares			Weighted average exercise price		Number of shares		Weighted average exercise price

Outstanding at beginning of year		553,401		$	.76		553,401	$	.76
Options granted		474,201			.35		0		0
Options exercised		0			0		0		0
Options forfeited/expired		(64,200	)		.80		0		0

Outstanding at end of year		963,402		$	.56		553,401	$	.76

Options exercisable at end of year		963,402					553,401
Non-vested options at end of year		0					0
Weighted-average
Remaining contractual term – all options	2.9 yrs					2.7 yrs
Weighted-average
Remaining contractual term – vested options	2.9 yrs					2.7 yrs
Fair value of options vested during the year	$	137,505				$	0
Aggregate intrinsic value	$	0				$	0

NOTE 7 – RELATED PARTY NOTES AND ADVANCES

On July 7, 2009, the Company entered into a $100,000 unsecured promissory note with an officer, due on demand. Interest is payable at 12% per annum. Also, on December 11, 2009, the Company entered into a $50,000 note with a shareholder/director. Interest is 5% per annum. The principal balance of the note is due on the earlier of December 11, 2013, or upon completion by the Company of equity financing in excess of $1.0 million in gross proceeds. Interest on the loan is payable on the maturity date at the rate of 5% per annum. This note is now overdue for payment.

On June 1, 2010, the Company entered into a $50,000 convertible promissory note with a shareholder/director which shall be due and payable on June 1, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. The assignment of the conversion feature of the note resulted in a loan discount being recorded. The discount amount of $36,207 is being amortized over the original thirty-six month term of the debt as additional interest expense. Amortization for this loan was $12,069 and $7,000 for the years ended December 31, 2013 and 2012. This note is now overdue for payment.

F-13

On June 1, 2010, the Company entered into $300,000 of convertible promissory notes with a shareholder/director which shall be due and payable on June 1, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On July 20, 2010, the Company entered into a $200,000 convertible promissory note with a shareholder/director which shall be due and payable on July 20, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On July 20, 2010, the Company entered into $300,000 of convertible promissory notes with shareholders/director which shall be due and payable on July 20, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On December 10, 2010, the Company entered into $150,000 of convertible promissory notes with shareholders/director which shall be due and payable on December 10, 2013 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock. This note is now overdue for payment.

On October 20, 2011, the Company entered into a $70,000 convertible promissory note with a shareholder/director which shall be due and payable on October 20, 2014 and accrue interest at 8.0% per annum payable at maturity and which may be converted at any time into shares of common stock.

During 2010, 2011 and 2012 such shareholder/director advanced the Company $150,000, $150,000 and $320,000 respectively. Such advances are due on demand and bear interest at 5%, 8% and 8% per annum respectively.

During 2013, such shareholder/director advanced the Company $175,000 to be applied to stock subscriptions expected to be issued in 2014. Such advances do not bear interest.

Discounts representing additional interest expense had been recorded on the issuance of warrants related to certain notes. Such discounts are being amortized over the terms of the respective notes on a straight-line basis and are netted with those notes for purposes of balance sheet presentation. Interest expense resulting from the amortization of discounts amounted to approximately $142,000 and $162,000, for the years ended December 31, 2013 and 2012, respectively. All debt discounts have been fully amortized as of December 31, 2013.

NOTE 8- COMMITMENTS AND CONTINGENCIES

Office Lease -

EnerTeck leases office space under a non-cancelable operating lease. Future minimum rentals due under non-cancelable operating leases with an original maturity of at least one-year are approximately as follow:

December 31,	Amount
2014	$	39,650
2015		50,811
2016		52,172
2017		53,533
2018		54,440
2019		36,293
Total	$	286,898

F-14

This lease provides for a rent-free period as well as increasing rental payments. In accordance with generally accepted accounting principles, rent expense for financial statement purposes is being recognized on a straight-line basis over the lease term. A deferred lease liability arises from the timing difference in the recognition of rent expense and the actual payment of rent.

Rent expense for the years ended December 31, 2013 and December 31, 2012 totaled $54,037 and $49,368, respectively. The current lease is under negotiation for a renewal for an additional three years, and expiring August 31, 2019, but has recently been finalized.

Ability to Continue as a Going Concern

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern which contemplates the realization of assets and satisfaction of liabilities in the normal course of business. During the years ended December 31, 2013 and 2012, the Company incurred recurring net losses of $1,705,000 and $1,611,000, respectively. In addition, at December 31, 2013, the Company has an accumulated deficit of $29,813,357. These conditions raise substantial doubt about the Company’s ability to continue as a going concern. The financial statements do not include any adjustments that might be necessary if the Company is unable to continue as a going concern.

The Company’s continuation as a going concern is contingent upon its ability to obtain additional financing and to generate revenues and cash flow to meet its obligations on a timely basis. Management believes that sales revenues for 2013 and 2012 were considerably less than earlier anticipated primarily due to circumstances which have been corrected or are in the process of being corrected. Tests which were expected to be run and completed during 2013 were, for reasons beyond the company’s control either delayed or rescheduled completely into 2014 and are ongoing at this time. Management expected that marine, railroad and trucking sales would show significant increases in 2013 over what has been generated in the past. That did not materialize. This was caused by delays in the completion of long term client demonstrations for several extremely large new clients which were initially intended to be completed during 2013 and but were delayed and are continuing to take place during 2014. While it remains to be seen if all will be successful, it is believed that the final results will be in our favor and that the company will show significant improvement over the next two years.

The Company has been able to generate working capital in the past through private placements and issuing promissory notes and believes that these avenues will remain available to the Company if additional financing is necessary. No assurance can be made that any of these efforts will be successful.

NOTE 9 - CONCENTRATION OF CREDIT RISK

Financial instruments that potentially subject EnerTeck to concentration of credit risk are accounts receivable. Currently all Accounts Receivable are considered collectible. EnerTeck performs ongoing credit evaluations as to the financial condition of its customers. Generally, no collateral is required.

EnerTeck at times has cash in bank in excess of Federal Deposit Insurance Corporation (“FDIC”) insurance limits. At December 31, 2013, EnerTeck had $16,000 in cash which is insured.

For the year ended December 31, 2013, sales to each of four customers exceeded 10% of total sales, and aggregated to approximately 79% of total sales. Those four customers represented approximately 38% of total accounts receivable at December 31, 2013. For the year ended December 31, 2012, sales to each of five customers exceeded 10% of total sales, and aggregated to approximately 80% of total sales.

F-15