Annual Statements Open main menu

GULF ISLAND FABRICATION INC - Annual Report: 2010 (Form 10-K)

Form 10-K for fiscal year ended December 31, 2010
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

 

 

(Mark One)

x Annual Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the fiscal year ended December 31, 2010

or

 

¨ Transition Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the transition period from                 to                 

Commission File Number 001-34279

 

 

GULF ISLAND FABRICATION, INC.

(Exact name of registrant as specified in its charter)

 

 

 

Louisiana   72-1147390

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification Number)

567 Thompson Road, Houma, Louisiana   70363
(Address of principal executive offices)   (zip code)

(985) 872-2100

(Registrant’s telephone number, including area code)

 

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class registered

 

Name of each exchange on which registered

Common Stock, no par value  

The Nasdaq Stock Market LLC

(Nasdaq Global Select Market)

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding twelve months (or for such shorter time that the registrant was required to submit and post such files).     Yes      No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer    ¨

  Accelerated filer    x   Non-accelerated filer    ¨   Smaller reporting company    ¨
    (Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant at June 30, 2010 was approximately $ 214,548,356.

The number of shares of the registrant’s common stock, no par value per share, outstanding February 28, 2011 was 14,346,676.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive Proxy Statement prepared for use in connection with the registrant’s 2011 Annual Meeting of Shareholders to be held April 28, 2011 have been incorporated by reference into Part III of this Form 10-K.

 

 

 


Table of Contents

GULF ISLAND FABRICATION, INC.

ANNUAL REPORT ON FORM 10-K FOR

THE FISCAL YEAR ENDED DECEMBER 31, 2010

TABLE OF CONTENTS

 

              Page  

PART I

       
 

Items 1 and 2.

  

Business and Properties

     1   
 

Item 1A.

  

Risk Factors

     13   
 

Item 1B.

  

Unresolved Staff Comments

     19   
 

Item 3.

  

Legal Proceedings

     19   
 

Item 4.

  

Reserved

     19   
    

Executive Officers of the Registrant

     19   

PART II

       
 

Item 5.

  

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

     20   
 

Item 6.

  

Selected Financial Data

     22   
 

Item 7.

  

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     24   
 

Item 7A.

  

Quantitative and Qualitative Disclosures About Market Risk

     29   
 

Item 8.

  

Financial Statements and Supplementary Data

     29   
 

Item 9.

  

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

     30   
 

Item 9A.

  

Controls and Procedures

     30   
 

Item 9B.

  

Other Information

     32   

PART III

       
 

Item 10.

  

Directors, Executive Officers and Corporate Governance

     32   
 

Item 11.

  

Executive Compensation

     32   
 

Item 12.

  

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

     32   
 

Item 13.

  

Certain Relationships and Related Transactions, and Director Independence

     33   
 

Item 14.

  

Principal Accounting Fees and Services

     33   

PART IV

       
 

Item 15.

  

Exhibits, Financial Statement Schedules

     34   
GLOSSARY OF CERTAIN TECHNICAL TERMS      G-1   
FINANCIAL STATEMENTS      F-1   
SIGNATURES      S-1   
EXHIBIT INDEX      E-1   

 

i


Table of Contents

Forward-Looking Information

Certain statements included in this report and in oral statements made from time to time by management of the Company that are not statements of historical fact are forward-looking statements. In this report, forward-looking statements are included primarily in the sections entitled “Business and Properties,” “Legal Proceedings,” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” The words “expect,” “believe,” “anticipate,” “project,” “plan,” “estimate,” “predict” and similar expressions often identify forward-looking statements. All such statements are subject to certain risks and uncertainties that could cause actual results and outcomes to differ materially from the results and outcomes predicted in the statements and investors are cautioned not to place undue reliance upon them. Important factors that may cause our actual results to differ materially from expectations or projections include those described under the heading “Cautionary Statement” in Item 1A. Risk Factors. Forward looking statements speak only as to the date of this report, and we undertake no obligation to update or revise such statements to reflect new circumstances or unanticipated events or circumstances.

PART I

Items 1 and 2. Business and Properties

Certain technical terms are defined in the “Glossary of Certain Technical Terms” beginning on page G-1.

General

We are a leading fabricator of offshore drilling and production platforms, hull and deck sections of floating production platforms and other specialized structures used in the development and production of offshore crude oil and natural gas (“oil and gas”) reserves. The company was incorporated in 1985 by a group of investors, including Alden J. “Doc” Laborde, and began operations at our fabrication yard on the Houma Navigation Canal in southern Louisiana, approximately 30 miles from the Gulf of Mexico. Our Houma facilities are located on 630 acres, of which 283 are currently developed for fabrication activities with 347 acres available for future expansion. Effective January 31, 2006, we acquired the facilities, machinery and equipment of Gulf Marine Fabricators, L.P. (“Gulf Marine”) located on 372 acres in San Patricio and Nueces Counties, Texas.

Gulf Island Fabrication, Inc. serves as a holding company and conducts all of its operations through its subsidiaries, which include Gulf Island, L.L.C. (“Gulf Island”), Gulf Island Marine Fabricators, L.L.C. (“Gulf Island Marine”) (performing marine fabrication and construction services), Dolphin Services, L.L.C. (“Dolphin Services”) (performing offshore and onshore fabrication and construction services), Southport, L.L.C. (“Southport”) (specializing in the fabrication of living quarters for offshore platforms), Gulf Island Resources, L.L.C. (“Gulf Island Resources”) (hiring of laborers with similar rates and terms as those provided by contract labor service companies), and Gulf Marine.

Other Developments

In October 2008, we formed a limited liability company called Dolphin Steel Sales, L.L.C. (“Dolphin Steel Sales”) to increase the marketing efforts of our existing steel sales business. Our steel sales company operates a three acre facility adjacent to Gulf Island’s main yard with a product line that includes plates and other products that utilize Gulf Island’s capability to process the steel by cutting, shaping, forming and painting.

Website and Electronic Posting Disclosures

Our website address is www.gulfisland.com. We make available on or through our website, without charge, on the day such material is filed with the Securities and Exchange Commission (“SEC”), our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports. The

 

1


Table of Contents

SEC also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The SEC’s website address is www.sec.gov. Our website and the information contained therein or connected thereto are not intended to be incorporated into this report on Form 10-K.

Description of Operations

Our primary activity is the fabrication of offshore drilling and production platforms, including jackets and deck sections of fixed production platforms, hull, tendon, and/or deck sections of floating production platforms (such as TLPs, SPARs, FPSOs and MinDOC’s), piles, wellhead protectors, subsea templates and various production, compressor and utility modules. We also produce and repair pressure vessels used in the oil and gas industry, refurbish existing platforms, fabricate various other types of steel structures, and fabricate living quarters for installation on such platforms ranging in size from 4 to 250 beds, provide onshore and offshore scaffolding and piping insulation services, perform heavy lifts such as ship integration and TLP module integration, load and offload jack-up drilling rigs, semi-submersible drilling rigs, TLPs, SPARs or other similar cargo. We also fabricate multiple processing modules installed in petro-chemical plants. We now provide our customers with what we believe is the greatest amount of fabrication facilities on the Gulf of Mexico. Gulf Island Marine can fabricate towboats, barges, lift boats, offshore support vessels and mid-body sections for offshore supply vessels. Our Dry Dock has the capacity to lift 9,000 tons and is used for maintenance and repairs to third party marine vessels, as well as to launch vessels being fabricated at our facilities.

We use modern welding and fabrication technology, and all of our products are manufactured in accordance with industry standards, specifications and regulations, including those published by the American Petroleum Institute, the American Welding Society, American Society of Mechanical Engineers, American Bureau of Shipping and the United States Coast Guard. The quality management systems of our operating subsidiaries are certified as ISO 9001-2008 quality assurance programs. See “Safety and Quality Assurance.”

Through Gulf Island and Gulf Marine we fabricate the structural components of fixed platforms. A fixed platform is the traditional type of platform used for the offshore development and production of oil and gas, although in recent years there has been an increase in the use of floating production platforms as a result of increased drilling and production activities in deeper waters. Most fixed platforms built today can accommodate both drilling and production operations. These combination platforms are large and generally more costly than single-purpose structures. However, because directional drilling techniques permit a number of wells to be drilled from a single platform and because drilling and production can take place simultaneously, combination platforms are often more cost effective.

The most common type of fixed platform consists of a jacket (a tubular steel, braced structure extending from the mudline on the seabed to a point above the water surface) which is supported on tubular pilings driven deep into the seabed and supports the deck structure located above the level of storm waves. The deck structure, extending above the surface of the water and attached to the tubular pilings extending out of the top end of the jacket, is designed to accommodate multiple functions, including drilling, production, separating, gathering, piping, compression, well support and crew quartering. Platforms can be joined by bridges to form complexes of platforms for very large developments or to improve safety by dividing functions among specialized platforms. Jacket-type platforms are generally the most viable solution for water depths of 1,000 feet or less. Although there is no height limit to the size of the jackets that can be fabricated at our Houma facilities, the dimensions of the Houma Navigation Canal prevent the transportation to the Gulf of Mexico of most jackets designed for water depths exceeding 800 feet. We can, however, build decks, piping and equipment modules, living quarters, piles and other components of platforms for installation in any water depth. Our Gulf Marine south yard in Texas, which is located on the Gulf Intercoastal Waterway and the 45 feet deep Corpus Christi Ship Channel, provides direct and unrestricted access to the Gulf of Mexico, which allows for unlimited fabrication or assembly of any size structure in use today. Often, customers split projects among fabricators, contracting with different companies for the fabrication of the jacket, deck sections, living quarters and piles for the same platform.

 

2


Table of Contents

Through the construction of these components, our Houma facility participates in the construction of platforms requiring jackets and/or hulls that are larger than those we could transport through the Houma Navigation Canal.

Most of the steel used in our operations arrives at our fabrication yards as steel plate. The plate is cut and rolled into tubular sections at rolling mills in the fabrication yards. The tubular sections (which vary in diameter up to 23 feet) are welded together in long straight tubes to become legs or into shorter tubes to become part of the network of bracing that support the legs. Various cuts and welds in the fabrication process are made by computer-controlled equipment that operates from data developed during the design of the structure. Our ability to fabricate and assemble the large tubular sections needed for jackets built for use in water depths over 300 feet distinguish us from all but two of our domestic competitors.

Jackets are built on skidways (which are long parallel rails along which the jacket will slide when it is transferred to a barge for towing out to sea) and are generally built in sections so that much of their fabrication is done on the ground. As each section of legs and bracing is complete, large crawler cranes pick up an entire side and “roll up” the section, which is then joined to another uprighted section. When a jacket is complete and ready for launch, it is pulled along the skidway onto a launch barge, which is gradually de-ballasted to compensate for the weight of the structure as more of it moves aboard the barge. Using ocean-going tugs, the barge and jacket are transported to the offshore installation site.

Decks are built either as single structures or in sections and are installed on location on fixed and floating platforms by marine construction contractors. The composition and quantity of petroleum in the well stream generally determine the makeup of the production deck on a processing platform. Typical deck equipment includes crude oil pumps, oil and gas separators and gas compressors. Unlike large jackets, which are transported in a horizontal position, decks are transported upright and, as a result, are not subject to the width restrictions of the Houma Navigation Canal. Therefore, the only limitation on our ability to fabricate decks in our Houma facility is the weight capacity of the barges that transport the decks from our yard to the installation site. Barges currently exist that have the weight capacity and other characteristics required to transport even the largest of the decks currently installed in the world, and we believe that we can construct some of the largest decks at our facilities. While larger deck structures to be built in the future could exceed the capacities of currently existing barges, management does not believe that this will materially affect our share of the market for deck construction.

In November 2009, we delivered the first deepwater dry tree drilling and production platform built in the United States. The MinDOC hull weighs approximately 19,000 short tons. The hull has three vertical columns arranged in a triangular shape connected to upper and lower pontoon sections. A vertical inner tube runs the full length of each leg and houses a variety of equipment used to ballast as well as instruments collecting data for stability. The MinDOC hull has a similar look to a Semisubmersible but has characteristics of a SPAR hull. The hull has a 40 year design life and the overall length and diameter of the columns is dictated by the amount of topsides payload the customer desires. It has superior stability and a higher load capacity over Semisubmersibles and SPARs. Its risers are tensioned by a hydraulic riser system rather than air cans or buoyancy cans used on SPARs. The platform is held in place by a 12 point mooring system, four mooring lines per column.

The deck sections that sit on top of the hull can be configured in a traditional rectangular shape or in a T-type configuration. The T-Type configuration is the method that was chosen for the MinDOC Project. Two deck sections were fabricated by Gulf Island with a combined weight of approximately 6,000 short tons.

We can also fabricate TLPs and sections of, or structures and tendons used in connection with, TLPs. TLPs consist of a deck that sits atop one or more column-shaped hulls, which are positioned on site with vertical tendons running from the hulls to the seabed. The tendons hold the hulls partially submerged and are highly tensioned using the buoyancy of the hulls. This system develops a restoring force against wave, wind and current actions in proportion to the lateral displacement of the vessel. Wells for a TLP are often pre-drilled through a subsea template. Long, flexible production risers, which carry the petroleum to the deck of the TLP, are

 

3


Table of Contents

supported in tension by mechanical tensioner machines on the platform’s deck and are directly subject to wave, wind and current forces. TLPs can be used in any water depth and are generally better suited than fixed platforms for water depths greater than 1,000 feet.

The size of a TLP depends on a number of factors, including the intended scope of production of the platform, the length of the production risers connected to the platform, the size of the deck to be installed on the platform and the water depth for which the platform is designed. We can fabricate deck sections and hulls for use with TLPs of any size. TLPs, MinDOCs and other floating concepts are the alternatives of choice for deepwater drilling and production platforms.

We have fabricated subsea templates for use in connection with TLPs, which are structures that are installed on the seabed before development drilling begins. As exploration and drilling move into the deepwater of the Gulf of Mexico, we believe that there will be increased opportunities to fabricate subsea templates, as well as decks and other structures, for use in connection with TLPs.

In addition, we fabricate piles and other rolled goods, templates, bridges for connecting offshore platforms, wellhead protectors, various production, compressor and utility modules and other structures used in offshore oil and gas production and development activities. All of our products are installed by marine construction contractors.

Through Dolphin Services, we also provide interconnect piping services on offshore platforms, inshore steel and wood structure construction and fabrication of pressure vessels and large and small packaged skid units. Interconnect piping services involve sending employee crews to offshore platforms that have been installed in the Gulf of Mexico in order to perform welding and other activities required to connect production equipment, service modules and other equipment to a platform prior to its becoming operational. Dolphin Services also contracts with oil and gas companies that have platforms and other structures located in the inland lakes and bays throughout the Southeast for various on-site construction and maintenance activities. At its existing facility located a quarter of a mile from the Gulf Island main yard, Dolphin Services can fabricate jackets up to 100 feet tall, along with decks and other steel structures. Dolphin Services has also been active in the refurbishment of existing platforms. Platform operators occasionally remove platforms previously installed in the Gulf of Mexico and return the platforms to a fabricator for refurbishment, which usually consists of general repairs, maintenance work and modification. Dolphin Services also serves state and local governments with various municipal and drainage projects such as pump stations, levee reinforcement, bulkheads and other levee and drainage projects.

Facilities and Equipment

Facilities. Our corporate headquarters and Gulf Island’s main fabrication yard are located on the east bank of the Houma Navigation Canal in Houma, Louisiana, approximately 30 miles from the Gulf of Mexico. This facility is situated on approximately 140 acres, of which 100 acres are developed for fabrication, and includes several buildings totaling 36,000 square feet of administrative offices, 267,000 square feet of covered fabrication area, over 17,000 square feet of warehouse storage area and 8,000 square feet of training and medical facilities. The main yard also has approximately 2,800 linear feet of water frontage, of which 1,500 feet is steel bulkhead that permits load out of heavy structures.

Gulf Island’s west yard is located across the Houma Navigation Canal from the main yard on 437 acres, 130 acres of which are developed for fabrication and over 300 acres of which are unimproved land that could be used for expansion. The west yard, which has approximately 72,000 square feet of covered fabrication area and 4,600 square feet of warehouse storage area, spans 6,750 linear feet of the Houma Navigation Canal, of which 2,350 feet is steel bulkhead.

Our marine company is now located in the west yard with two buildings providing an additional 5,400 square feet for administrative offices, 55,000 square feet of covered fabrication area and 16,400 square feet of

 

4


Table of Contents

warehouse area. One building is a new fabrication shop that is 125 feet wide and 400 feet deep with a 54 foot under hook height. This new building houses 4 twenty-ton overhead cranes and allows us to fabricate boat sections and panels under a covered fabrication area on the west yard. The other building is a new warehouse and office building that is 200 feet long and 80 feet wide. Included in its warehouse area is 4,800 square feet of climate controlled storage, which now gives our Gulf Island facilities a total of 7,200 square feet. The marine company also utilizes an expanded covered area connected to the panel line building which is open at both ends and is approximately 24,600 square feet.

Gulf Island’s north yard, formerly the Southport facility, operates on the east bank of the Houma Navigation Canal adjacent to Gulf Island’s main fabrication yard. The facility covers 23 acres and includes a two-story, 5,000 square foot administration building with an attached 5,300 square foot warehouse. The property has approximately 1,850 linear feet of water frontage, of which 380 linear feet is steel bulkhead that permits docking of large ocean going vessels and the loadout of heavy structures.

Dolphin Services operates from a 30-acre site located approximately a quarter of a mile from Gulf Island’s main yard on a channel adjacent to the Houma Navigation Canal. The facility includes a 9,900 square foot building for administrative staff, approximately 32,000 square feet of covered fabrication area, 1,500 square feet of warehouse storage area, a 10,000 square foot blasting and coating facility and approximately 990 linear feet of water frontage, of which 660 feet is steel bulkhead.

Gulf Marine’s south yard in Ingleside, Texas is located on the northwest corner of the intersection between the Gulf Intracoastal Waterway and the Corpus Christi Ship Channel. The 45 feet deep Corpus Christi Ship Channel provides direct and unrestricted access to the Gulf of Mexico, which makes this site ideal for the fabrication or assembly of many types of large structures. This facility is situated on approximately 212 acres developed for fabrication and assembly, and includes a fabrication shop with 5,000 square feet of covered fabrication area, 10,000 square feet of warehouse storage area and 2,700 square feet of training facilities. The yard also has approximately 2,650 linear feet of water frontage, of which all is steel bulkhead. Gulf Marine’s Specialized Lifting Device (SLD) is located in the south yard and is used to perform heavy lifts of up to 4,000 tons such as ship integration and TLP module integration, load and offload jack-up drilling rigs or production hulls, semi-submersible drilling rigs, TLPs, SPARs or other similar cargo. In addition, Gulf Marine has dredged an area 86 feet deep within 500 feet of the bulkhead to be used in conjunction with heavy lifts. This area measures 800 feet by 200 feet at the base and can accommodate the largest existing semi submersible transport vessels. In addition, the graving dock measures 600 feet long by 250 feet wide and 40 feet deep. It has a reinforced concrete slab floor, sheet pile walls and pile supported relieving platforms around the perimeter to take the surcharge load applied by cranes. The south end of the graving dock, which opens to the Corpus Christi Ship Channel, has a removable sheet piled wall supported by steel struts. The wall is being replaced by the gate described below. When flooded, the graving dock has a minimum of 30 feet of water over the concrete floor. The graving dock was constructed to facilitate the fabrication and assembly of certain components of the MinDOC hull. Although the graving dock was constructed to facilitate the MinDOC hull, it can be used for fabricating any floating structure that will fit within its perimeters and can also be used for ship and floating rig repair.

During 2009, Gulf Marine began construction of a gate for the graving dock expected to be completed in the late first quarter or early second quarter of 2011. The graving dock gate is a steel barge like structure consisting of a steel reinforced wall and a buoyancy tank. The floating structure is 240’ long x 35’ wide x 40’ deep and weighs approximately 950 tons. The gate structure has rubber seals that engage the walls and the graving dock floor. Although the de-ballasting of the dock requires pumps, the gate is equipped with piping to allow the gate to be flooded without the use pumps. The removal and installation of the gate is a much shorter duration than the current process involving sheet pile removal and installation. Removal of the gate will be accomplished within a day and installation and de-ballasting is estimated to take 3-4 days, whereas installation and removal of sheet piles would take well over a month and require replacing sheet piles quite often. This process improvement enables the dry-docking of vessels for repairs on a relatively quick turnaround and opens up new markets at our Gulf Marine facility.

 

5


Table of Contents

Gulf Marine’s north yard in Aransas Pass, Texas is located along the U.S. Intracoastal Waterway and is approximately three miles north of the Corpus Christi Ship Channel. This facility is situated on approximately 160 acres, of which 85 acres are dedicated to fabrication activities, and 55 acres are used for the storage of steel, prefabricated elements, equipment, and spare parts and includes several buildings with approximately 328,000 square feet of covered fabrication area, 22,000 square feet for administrative staff, 61,750 square feet of warehouse storage area and 16,000 square feet of training and medical facilities. The yard also has approximately 3,000 linear feet of water frontage, of which approximately 1,000 is steel bulkhead. The north yard can fabricate decks, skids and modules, jackets, piles, MinDOC, SPAR and TLP components, process piping, tanks, barges and drill rig structure components.

We own all of the foregoing properties.

Equipment. Gulf Island’s main yard houses its Bertsch Model 34 and Model 20 plate bending rolls, a computerized Vernon brace coping machine used for cutting steel in complex geometric sections, a Frye Wheelabrator and a U.S. Filter grit blast system, a hydraulic plate shear, a hydraulic press brake, and various other equipment needed to build offshore structures and fabricate steel components. Gulf Island’s west yard has a Bertsch Model 38 plate bending roll, a computerized Vernon brace coping machine, and various other equipment used in our fabrication business. The brace coping machine installed in Gulf Island’s west yard can handle pipe up to 1,500 pounds per foot and 54 inch outer diameter compared to the capacity of the current machine in the main yard, which is 1,000 pounds per foot and 48 inch outer diameter. The brace coping machine in the west yard provides additional efficiencies because it can cut 360 degrees without repositioning itself. Also, by having two machines, Gulf Island can double its capacity to cut braces thereby reducing idle production time in the yard. Gulf Island has a computerized numeric controlled plasma-arc cutting system that cuts and bevels steel up to one inch thick at a rate of two hundred inches per minute. The system can also etch into steel for piece markings and layout markings at a rate of three hundred inches per minute. Gulf Island also owns 16 crawler cranes, which range in tonnage capacity from 150 to 500 tons each and service both of Gulf Island’s yards. Gulf Island may rent additional cranes on a monthly basis in times of very high activity levels. Gulf Island owns six rubber-tired, hydraulic modular transporters (KAMAG—Type 2406) that allow fabricated deck sections that weigh as much as 1,200 tons to be transported around the facility. The transporters allow easier load-out of smaller decks and they provide more agility for the movement of deck sections throughout the yard than cranes. Gulf Island owns a deck barge which gives it the ability to move material and equipment to and from the various facilities more conveniently and reduce the cost of barge rentals and certain other transportation costs. Gulf Island performs routine repairs and maintenance on all of its equipment.

Gulf Island’s plate bending rolls allow it to roll and weld into tubular pipe sections approximately 50,000 tons of plate per year. By having such capacity at its fabrication facility, Gulf Island is able to coordinate all aspects of platform construction, thereby reducing the risk of cost overruns, delays in project completion, and labor costs. In addition, these facilities allow Gulf Island to participate as subcontractor on projects awarded to other contractors. Gulf Island has a state of the art, fully enclosed, and environmentally friendly blast and coating facility that can operate 24 hours a day. The facility is automated and provides blasting and coating activities in support of our Houma fabrication projects. The design output of the facility also allows us to provide blast and paint services to the local shipbuilding industry. The use of this equipment provides Gulf Island a competitive advantage by reducing labor costs.

Gulf Island’s panel line system, located in its west yard, consists of six individual in-line fully automated systems utilized to cut, weld, and assemble panels to be used in marine vessel construction. The first station consists of an ESAB Avenger 3 Plasma cutting table for high speed cutting and beveling of steel plates and shapes. The second station incorporates an Ogden Model OSWS-5600 single sided welder complete with an electro magnetic plate holding system whereby two steel plates are automatically welded together in a single pass utilizing a multiple sub arc welding process. This process can be repeated up to four times with a result of a single panel having an overall dimension of 40 by 50 feet. An ESAB Avenger 3-13 plate marking and cutting machine is positioned at the third station which lays out the welded panels, marks the applicable locations for

 

6


Table of Contents

stiffeners installation, and cuts the plate to required configurations. The fourth station utilizes an Ogden Model SF-5600 stiffener fitting system to properly align and tack in place the plate stiffeners. The fifth station consists of an Ogden Model SW-5600-3 multiple stiffener welding system whereby three longitudinal plate stiffeners can be automatically welded (both sides) in a single operation performing continuous or intermittent welding of the stiffeners. There is also an automated conveyor system that operates along the panel line which transfers the panels from station to station. The sixth station is a vertical lifting system that elevates the fabricated panels to the required height for transportation to the field.

Gulf Island Marine owns a 9,000 ton Dry Dock used to supplement our marine construction operations in Houma. The Dry Dock is 240 feet long by 160 feet wide and 140 feet wide between the wing walls. The bottom is 10 feet deep with 30 foot walls above the bottom. The Dry Dock is used for maintenance and repairs to third party marine vessels, as well as to launch vessels being fabricated at our facilities.

Dolphin Services owns three spud barges for use in connection with its inshore construction activities. Each barge is equipped with a crane with a lifting capacity of 60 to 100 tons each. Dolphin Services also owns three Manitowoc 4100 cranes with lifting capacities of 200 to 230 tons each and two smaller crawler cranes with lifting capacities of 60 tons each. Dolphin also owns a Model 2516 tug boat with two 300 horsepower engines. This boat is 26 feet long by 16 feet wide and is used to push our three spud barges and to reduce costs on tug rentals.

Gulf Marine’s SLD is a twin boom device with a below hook rating of 4,000 tons at a radius of 207 feet from the bulkhead. The 410-foot booms are 100 feet apart and provide a lifting height of 317 feet from the water. The unit is powered electro-hydraulically with each drum winch driven independently by two hydraulic motors. The lifting rate utilizing the double drum winch is 1.25 feet per minute and utilizing a single drum winch is 2.5 feet per minute. Gulf Marine also owns 13 crawler cranes, which range in tonnage capacity from 230 to 660 tons each. Gulf Marine’s pipe mill is equipped with a Haeusler Quad Roll, and Bertsch Model 30, Model 34 and Model 36 plate bending roll machines for diameters ranging from 1 foot 6 inches to 10 feet and one large diameter plate bending roll machine, the Haeusler Quad Roll, for diameters ranging from 3 feet to 23 feet. The two Romar CNC-controlled flame planers, each with four torch stations (two torches per station), are used to cut steel plate up to 12 feet wide and 65 feet long. The Gulf Marine paint facility is equipped with a Pangborn shot blast machine, 20,000 square feet of climate controlled staging area and 16 feet by 14 feet by 125 feet paint booth that can operate 24 hours a day. Gulf Marine owns six rubber-tired, hydraulic modular transporters (KAMAG—Type 2406) similar to those in our Houma facility.

Materials and Supplies

The principal materials and supplies we use in the fabrication business are standard steel shapes, steel plate, welding gases, fuel oil, gasoline and paint, all of which are currently available from many sources, and we do not depend upon any single supplier or source. Recently, prices for raw materials used to produce steel, such as iron ore and coal, have increased. Demand for steel has also increased both domestically and abroad. Standard delivery from a steel mill is about 8-10 weeks. However, domestic steel mills are currently not confirming new orders, neither to price nor delivery, due to demand. Foreign mills are offering firm orders, but delivery lead-time is longer by an additional 8-10 weeks. Steel prices have increased 25% to 30% from November 2010 to now, with such prices expected to continue and/or increase further through most of 2011. We often negotiate escalation clauses in our contract terms to increase the contract price proportionally with the increase of cost of materials purchased during the life of the contract.

Safety and Quality Assurance

Management is concerned with the safety and health of our employees and maintains a stringent safety assurance program to reduce the possibility of accidents. Our safety department establishes guidelines to ensure compliance with all applicable state and federal safety regulations and provides training and safety education

 

7


Table of Contents

through orientations for new employees and subcontractors, daily crew safety meetings and first aid and CPR training. We also employ in-house medical personnel. We have a comprehensive drug program and conduct periodic employee health screenings. A safety committee, whose members consist of management representatives and peer-elected field representatives, meets once a month to discuss safety concerns and suggestions that could prevent accidents. We also reward our employees with safety awards distributed throughout the year. These awards are the result of observations and audits performed by the safety department and front line supervision.

We fabricate to the standards and regulations of the American Petroleum Institute, the American Welding Society, the American Society of Mechanical Engineers, American Bureau of Shipping, United States Coast Guard and specific customer specifications. We use welding and fabrication procedures in accordance with the latest technology and industry requirements. Training programs have been instituted to upgrade skilled personnel and maintain high quality standards. In addition, we maintain on-site facilities for the non-destructive testing of all welds, a process performed by an independent contractor.

The quality management systems of Gulf Island, Gulf Island Marine, Dolphin Services, Southport and Gulf Marine are certified as ISO 9001-2008 programs. ISO 9001-2008 is an internationally recognized verification system for quality management overseen by the International Standard Organization based in Geneva, Switzerland. The certification is based on a review of our programs and procedures designed to maintain and enhance quality production and are subject to annual review and recertification.

Customers and Contracting

Our customers are primarily major and independent oil and gas exploration and production companies. We also may perform sub-contract work for one or more of our competitors. Over the past five years, sales of structures and related services used in the Gulf of Mexico by oil and gas exploration and production companies accounted for approximately 73% of our revenue. Our international sales fluctuate from year-to-year depending on whether and to what extent our customers require installation of fabricated structures outside of the United States. Sales of fabricated structures installed outside the United States comprised between 1% and 25% of revenue during each of the last five years, and accounted for 3%, 1% and 20% of revenue for the years ended December 31, 2010, 2009 and 2008, respectively.

A large portion of our revenue has historically been generated by several customers, although not necessarily the same customers from year-to-year. For example, our largest customers (those which individually accounted for more than 10% of revenue in a given year) accounted for 38% of revenue in 2010 (16% for Eni US Operating Co. Inc., 11% for American Electric Power Service Corporation and 11% for Versabuild, LLC ), 48% of revenue in 2009 (36% for Bluewater Industries, Inc. and 12% for Eni US Operating Co. Inc.), and 54% of revenue in 2008 (37% for Bluewater Industries, Inc. and 17% for Daewoo Shipbuilding and Marine Engineering, Ltd.). In addition, at December 31, 2010, 99% of our backlog, which consists of work remaining at December 31, 2010 and commitments received through February 28, 2011, was attributable to 23 projects involving 12 customers. Of our backlog at December 31, 2010, 64.1% is for one customer. The level of fabrication that we may provide to any particular customer depends, among other things, on the size of that customer’s capital expenditure budget devoted to project construction plans in a particular year and our ability to meet the customer’s delivery schedule. Thus, customers that account for a significant portion of revenue in one fiscal year may represent an immaterial portion of revenue in subsequent years.

While customers may consider other factors, including the availability, capability, reputation and safety record of a contractor, price and the ability to meet a customer’s delivery schedule are the principal factors on which we are awarded contracts. Our contracts generally vary in length from one month to 24 months depending on the size and complexity of the project. Generally, our contracts and projects are subject to termination at any time prior to completion, at the option of the customer. Upon termination, however, the customer is generally required to pay us for work performed and materials purchased through the date of termination and, in some instances, cancellation fees.

 

8


Table of Contents

Most of our projects are awarded on a fixed-price, unit rate, alliance/partnering or cost-plus basis. Under fixed-price contracts, we receive the price fixed in the contract, subject to adjustment only for change orders approved by the customer. As a result, we retain all cost savings but are also responsible for all cost overruns. Under a unit rate contract, material items or labor tasks are assigned unit rates of measure. The unit rates of measure will generally be amount of dollars per ton, per foot, per square foot, per item installed, etc. A typical unit rate contract can contain hundreds to thousands of unit rates of measure that all accumulate to determine the total contract value. Profit margins are built in to the unit rates and, similar to a fixed price contract, we retain all cost savings but are also responsible for all cost overruns. Under typical alliance/partnering arrangements, the parties agree in advance to a target price that includes specified levels of labor and material costs and profit margins. If the project is completed at less cost than that targeted in the contract, the contract price is reduced by a portion of the savings. If the cost of completion is greater than that targeted in the contract, the contract price is increased, but generally to the target price plus the actual incremental cost of materials and direct labor costs. Accordingly, under alliance/partnering arrangements, we have some protection from cost overruns but also share a portion of any cost savings with the customer. Under cost-plus arrangements, pursuant to which we receive a specified fee in excess of our direct labor and material costs, we are protected against cost overruns but do not benefit directly from cost savings. Because we generally price materials as pass-through items on our contracts, the cost and productivity of our labor force are the primary factors affecting our operating costs. Consequently, it is essential that we control the cost and productivity of the direct labor hours worked on our projects. As an aid to achieving this control, we place a single project manager in charge of the production operations related to each project and give significant discretion to the project manager, with oversight by the applicable subsidiary’s president and our president. As an incentive to control costs, each of Gulf Island, Gulf Island Marine, Dolphin Services and Gulf Marine give bonuses to its employees totaling 5% to 6% of their separate company income before taxes depending on job position.

Seasonality

Although high activity levels in the oil and gas industry and capacity limitations can somewhat diminish the seasonal effects on our operation, our operations have historically been subject to seasonal variations in weather conditions and daylight hours. Since most of our construction activities take place outdoors, the number of direct labor hours worked generally declines during the winter months due to an increase in rainy and cold conditions and a decrease in daylight hours. In addition, our customers often schedule the completion of their projects during the summer months in order to take advantage of the milder weather during such months for the installation of their platforms. In recent years, seasonality has had less of an impact on income, mainly due to our ongoing investment in machinery and equipment and covered fabrication areas.

The table below indicates for each quarter of the last three fiscal years the percentage of the annual revenue, gross profit and net income, and the number of direct labor hours worked. Because of seasonal effects, full year results are not likely to be a direct multiple of any particular quarter or combination of quarters. Reductions in industry activity levels may tend to increase the seasonal effects on our operations.

 

    2010     2009     2008  
    1st
Qtr.
    2nd
Qtr.
    3rd
Qtr.
    4th
Qtr.
    1st
Qtr.
    2nd
Qtr.
    3rd
Qtr.
    4th
Qtr.
    1st
Qtr.
    2nd
Qtr.
    3rd Qtr.     4th
Qtr.
 

Revenue

    28     30     24     18     27     25     25     23     29     28       22% a        21

Gross profit

    32     29     30     9     30     21     28     21     44     39       12% a        5

Net income

    34     26     27     13     30     19     29     22     46     41       10% a        3

Direct labor hours (in 000’s)

    663        672        625        443        857        791        811        697        967        1,019        931 a        903   

 

a. We experienced approximately 3 weeks of downtime at our Houma facilities and 5 days of downtime at our Texas facilities as a result of the hurricanes that struck the Gulf Coast during the third quarter of 2008.

 

9


Table of Contents

Competition

The offshore platform fabrication industry is highly competitive and influenced by events largely outside of the control of offshore platform fabrication companies. Platform fabrication companies compete intensely for available projects, which are generally awarded on a competitive bid basis with customers usually requesting bids on projects one to three months prior to commencement. Our marketing staff contacts engineering companies and oil and gas companies believed to have fabrication projects scheduled to allow us an opportunity to bid for the projects. Although price and the contractor’s ability to meet a customer’s delivery schedule are the principal factors in determining which qualified fabricator is awarded a contract for a project, customers also consider, among other things, the availability of technically capable personnel and facility space, a fabricator’s efficiency, condition of equipment, reputation, safety record and customer relations.

We currently have several domestic competitors, including J. Ray McDermott, S.A. and Kiewit Offshore Services, for the fabrication of platform jackets to be installed in water depths greater than 300 feet. In addition to these companies, we compete with other fabricators for platform jackets for intermediate water depths from 150 feet to 300 feet. A number of other companies compete for projects designed for shallower waters. Certain of our competitors have greater financial and other resources than we do.

We believe that while new competitors can enter the market for smaller structures relatively easily, it is more difficult to enter the market for jackets designed for use in water depths greater than 300 feet. This difficulty results from the substantial investment required to establish an adequate facility, the difficulty of locating a facility adjacent to an adequate waterway due to environmental and wetland regulations, and the limited availability of experienced supervisory and management personnel.

We believe that our competitive pricing, expertise in fabricating offshore structures and the certification of our facilities as ISO 9001-2008 fabricators will enable us to continue to compete effectively for projects destined for international waters. We recognize, however, that foreign governments often use subsidies and incentives to create jobs where oil and gas production is being developed. In addition, the increased transportation costs that are incurred when exporting structures from the U.S. to foreign locations may hinder our ability to successfully bid for projects against foreign competitors. Because of subsidies, import duties and fees, taxes on foreign operators, lower wage rates in foreign countries, fluctuations in the value of the U.S. dollar, the possible imposition of tariffs on raw materials imported into the United States and other factors, we may not be able to remain competitive with foreign contractors for projects designed for use in international waters, as well as those designed for use in the Gulf of Mexico.

Backlog

Our backlog is based on management’s estimate of the direct labor hours required to complete, and the remaining revenue to be recognized with respect to, those projects as to which a customer has authorized us to begin work or purchase materials pursuant to written contracts, letters of intent or other forms of authorization. Often, however, management’s estimates are based on incomplete engineering and design specifications. As engineering and design plans are finalized or changes to existing plans are made, management’s estimate of the direct labor hours required to complete and price at completion is likely to change. In addition, all projects currently included in our backlog are subject to termination at the option of the customer, although the customer, in that case, is generally required to pay us for work performed and materials purchased through the date of termination and, in some instances, cancellation fees. In addition, a customer can potentially delay the execution of their project.

As of December 31, 2010, we had a revenue backlog of $486.1 million and a labor backlog of approximately 3.8 million man-hours remaining to work, which consists of work remaining at December 31, 2010 and commitments received through February 28, 2011, compared to the revenue backlog of $136.8 million and a labor backlog of 1.5 million man-hours reported as of December 31, 2009. Our backlog as of December 31, 2010 includes amounts associated with a contract for the fabrication and integration of the topsides on a

 

10


Table of Contents

deepwater Gulf of Mexico project we received and announced on November 23, 2010. Of the backlog at December 31, 2010, 64.1% represents projects for one major global oil and gas company.

Of the backlog at December 31, 2010, $343.4 million, or 70.6%, represented projects destined for deepwater locations compared to $19.9 million, or 14.5%, of projects destined for deepwater locations included in the December 31, 2009 backlog. Depending on the size of the project, the termination or postponement of any one of our deepwater projects could significantly reduce our backlog, and could have a material adverse effect on revenue, net income and cash flow.

Of the backlog at December 31, 2010, we expect to recognize revenues of approximately $304.6 million (62.7%) during calendar year 2011, $177.5 million during calendar year 2012 and the remaining $4.0 million thereafter.

Government and Environmental Regulation

Many aspects of our operations and properties are materially affected by federal, state and local regulations, as well as certain international conventions and private industry organizations. The exploration and development of oil and gas properties located on the outer continental shelf of the United States is regulated primarily by the Bureau of Ocean Energy, Management and Enforcement (“BOEM”) of the Department of Interior (“DOI”). This agency replaced the former Minerals Management Service. The Secretary of the Interior, through the BOEM, is responsible for the administration of federal regulations under the Outer Continental Shelf Lands Act requiring the construction of offshore platforms located on the outer continental shelf to meet stringent engineering and construction specifications. Violations of these regulations and related laws can result in substantial civil and criminal penalties as well as injunctions curtailing operations. We believe that our operations are in compliance with these and all other regulations affecting the fabrication of platforms for delivery to the outer continental shelf of the United States. In addition, we depend on the demand for our services from the oil and gas industry and, therefore, can be affected by changes in taxes, price controls and other laws and regulations relating to the oil and gas industry. Offshore construction and drilling in certain areas has also been opposed by environmental groups and, in certain areas, has been restricted. To the extent laws are enacted or other governmental actions are taken that prohibit or restrict offshore construction and drilling or impose environmental protection requirements that result in increased costs to the oil and gas industry in general and the offshore construction industry in particular, our business and prospects could be adversely affected. We cannot determine to what extent future operations and earnings may be affected by new legislation, new regulations or changes in existing regulations.

Until our acquisition of the Gulf Marine facilities, the Houma Navigation Canal provided the only means of access from our facilities to open waters. The Houma Navigation Canal is considered to be a navigable waterway of the United States and, as such, is protected by federal law from unauthorized obstructions that would hinder water-borne traffic. Federal law also authorizes federal maintenance of the canal by the U.S. Corps of Engineers. The canal requires dredging to maintain its water depth and, while federal funding for this dredging has been provided for over 40 years, there is no assurance that Congressional appropriations sufficient for adequate dredging and other maintenance of the canal will be continued indefinitely. If sufficient funding were not appropriated for that purpose, the Houma Navigation Canal could become impassable by barges or other vessels required to transport many of our products and could have a material and adverse effect on our operations and financial position.

Our operations and properties are subject to a wide variety of increasingly complex and stringent foreign, federal, state and local environmental laws and regulations, including those governing discharges into the air and water, the handling and disposal of solid and hazardous wastes, the remediation of soil and groundwater contaminated by hazardous substances and the health and safety of employees. These laws may provide for “strict liability” for damages to natural resources and threats to public health and safety, rendering a party liable for the environmental damage without regard to negligence or fault on the part of such party. Sanctions for noncompliance may include revocation of permits, corrective action orders, administrative or civil penalties and criminal prosecution. Certain environmental laws provide for strict, joint and several liability for remediation of

 

11


Table of Contents

spills and other releases of hazardous substances, as well as damage to natural resources. In addition, we may be subject to claims alleging personal injury or property damage as a result of alleged exposure to hazardous substances. Such laws and regulations may also expose us to liability for the conduct of or conditions caused by others, or for acts that were in compliance with all applicable laws at the time we performed them.

The Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended, and similar laws provide for responses to and liability for releases of hazardous substances into the environment. Additionally, the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, the Safe Drinking Water Act, the Emergency Planning and Community Right to Know Act, each as amended, and similar foreign, state or local counterparts to these federal laws, regulate air emissions, water discharges, hazardous substances and wastes, and require public disclosure related to the use of various hazardous substances. Compliance with such environmental laws and regulations may require the acquisition of permits or other authorizations for certain activities and compliance with various standards or procedural requirements. We believe that our facilities are in substantial compliance with current regulatory standards.

Our operations are also governed by laws and regulations relating to workplace safety and worker health, primarily the Occupational Safety and Health Act and regulations promulgated thereunder. In addition, various other governmental and quasi-governmental agencies require us to obtain certain permits, licenses and certificates with respect to our operations. The kinds of permits, licenses and certificates required by our operations depend upon a number of factors. We believe that we have all material permits, licenses and certificates necessary for the conduct of our existing business.

Our compliance with these laws and regulations has entailed certain additional expenses and changes in operating procedures, which during the last three years have resulted in annual expenditures between $450,000 to $700,000. We believe that compliance with these laws and regulations will not have a material adverse effect on our business or financial condition for the foreseeable future. However, future events, such as changes in existing laws and regulations or their interpretation, more vigorous enforcement policies of regulatory agencies, or stricter or different interpretations of existing laws and regulations, may require additional expenditures by us, which expenditures may be material.

Our employees may engage in certain activities, including interconnect piping and other service activities conducted on offshore platforms, activities performed on the spud barges owned or chartered by us, marine vessel fabrication and repair activities performed at our facilities, and operating vessels owned by us, that are covered in either the provisions of the Jones Act or U.S. Longshoreman and Harbor Workers Act (“USL&H”). These laws operate to make the liability limits established under state workers’ compensation laws inapplicable to these employees and, instead, permit them or their representatives to pursue actions against us for damages or job related injuries, with generally no limitations on our potential liability. Our ownership and operation of vessels and our fabrication and repair of customer vessels can give rise to large and varied liability risks, such as risks of collisions with other vessels or structures, sinkings, fires and other marine casualties, which can result in significant claims for damages against us for, among other things, personal injury, death, property damage, pollution and loss of business.

In addition, our operations are subject to extensive government regulation by the United States Coast Guard, as well as various private industry organizations such as the American Petroleum Institute, American Society of Mechanical Engineers, American Welding Society and the American Bureau of Shipping.

Insurance

We maintain insurance against property damage caused by fire, flood, explosion and similar catastrophic events that may result in physical damage or destruction to our facilities. All policies are subject to deductibles and other coverage limitations. We also maintain a builder’s risk policy for construction projects, general liability insurance and maritime employer’s liability insurance which are also subject to deductibles and coverage

 

12


Table of Contents

limitations. The Company and our subsidiaries, Gulf Island, Dolphin Services and Gulf Island Marine are self-insured for workers’ compensation and USL&H claims except for losses in excess of $300,000 per occurrence. Gulf Marine and Gulf Island Resources’ workers’ compensation and USL&H coverage is similar to that of Gulf Island, Dolphin Services and Gulf Island Marine, except that the coverage is subject to a $300,000 per occurrence deductible. Dolphin Steel Sales’ workers’ compensation and USL&H coverage is similar to Gulf Marine and Gulf Island Resources except that the coverage is subject to no retention per occurrence. Although management believes that our insurance is adequate, there can be no assurance that we will be able to maintain adequate insurance at rates which management considers commercially reasonable, nor can there be any assurance that such coverage will be adequate to cover all claims that may arise.

Employees

Our workforce varies based on the level of ongoing fabrication activity at any particular time. As of December 31, 2010 and 2009, we had approximately 1,250 and 1,400 employees, respectively. Additionally, we will use contract labor when required to meet customer demand. The workforce was reduced during 2010 as a cost reduction measure. Due to the recent award of significant contracts, we will again focus on hiring employees in 2011 to meet the increasing level of activity. None of our employees are employed pursuant to a collective bargaining agreement, and we believe our relationship with our employees is good.

Our ability to remain productive and profitable depends substantially on our ability to attract and retain skilled construction workers, primarily welders, fitters and equipment operators. In addition, our ability to expand our operations depends not only upon customer demand but also on our ability to increase our labor force. The demand for such workers is high and the supply is extremely limited, especially during periods of high activity in the oil and gas industry. While we believe our relationship with our skilled labor force is good, a significant increase in the wages paid by competing employers could result in a reduction in our skilled labor force, increases in the wage rates we may pay, or both. If either of these occurred in the near-term the profits expected from work in progress could be reduced or eliminated and in the long-term, to the extent such wage increases could not be passed on to our customers, our production capacity could be diminished and the growth potential could be impaired. In an effort to maintain our current workforce and attract new employees in periods of high activity, we have enhanced several incentive programs and expanded our training facility to train our employees on productivity and safety matters.

Item 1A. Risk Factors

Cautionary Statement

Our business is subject to significant risks. We caution readers that the following important factors could affect our actual consolidated results and could cause our actual consolidated results in the future to differ materially from the goals and expectations expressed in the forward-looking statements contained in this report and in any other forward-looking statements made by us or on our behalf.

We are subject to the cyclical nature of the oil and gas industry.

Our business depends primarily on the level of activity by oil and gas companies in the Gulf of Mexico and along the Gulf Coast. This level of activity has traditionally been volatile as a result of fluctuations in oil and gas prices and their uncertainty in the future. The purchases of the products and services we provide are, to a substantial extent, deferrable in the event oil and gas companies reduce capital expenditures. Therefore, the willingness of our customers to make expenditures is critical to our operations. The levels of such capital expenditures are influenced by, among other things:

 

   

oil and gas prices and industry perceptions of future prices;

 

   

the cost of exploring for, producing and delivering oil and gas;

 

   

the ability of oil and gas companies to generate capital;

 

13


Table of Contents
   

the sale and expiration dates of offshore leases in the United States and overseas;

 

   

the discovery rate of new oil and gas reserves in offshore areas;

 

   

local, federal and international political and economic conditions; and

 

   

uncertainty regarding the United States energy policy, particularly any revision, reinterpretation or creation of environmental and tax laws and regulations that would negatively impact the industry.

Although activity levels in production and development sectors of the oil and gas industry are less immediately affected by changing prices and as a result, less volatile than the exploration sector, producers generally react to declining oil and gas prices by reducing expenditures. This has in the past and may in the future adversely affect our business. We are unable to predict future oil and gas prices or the level of oil and gas industry activity. A prolonged low level of activity in the oil and gas industry will adversely affect the demand for our products and services and our financial condition and results of operations.

We might be unable to employ a sufficient number of skilled workers.

Our ability to remain productive and profitable depends substantially on our ability to attract and retain skilled construction workers, primarily welders, fitters and equipment operators. In addition, our ability to expand our operations depends not only upon customer demand, but also on our ability to increase our labor force. The demand for such workers is high and the supply is extremely limited, especially during periods of high activity in the oil and gas industry. While we believe our relationship with our skilled labor force is good, a significant increase in the wages paid by competing employers could result in a reduction in our skilled labor force, increases in the wage rates we pay, increase in our use of contract labor, or all of these. Additionally, reductions made, from time to time, in our labor force may make it more difficult for us to increase our labor force to desirable levels during periods of increased customer demand for our services.

If any of these occurred in the near-term, the profits expected from work in progress could be reduced or eliminated and, in the long-term, to the extent wage increases could not be passed on to our customers, our production capacity could be diminished and growth potential could be impaired.

Our backlog is subject to change and may be adversely affected by the loss of or failure to secure deepwater projects.

Our backlog is based on management’s estimate of the direct labor hours required to complete, and the remaining revenue to be recognized with respect to, those projects as to which a customer has authorized us to begin work or purchase materials pursuant to written contracts, letters of intent or other forms of authorization. Often, however, management’s estimates are based on incomplete engineering and design specifications. As engineering and design plans are finalized or changes to existing plans are made, management’s estimate of the direct labor hours required to complete and price at completion is likely to change. In addition, all projects currently included in our backlog are subject to termination at the option of the customer, although the customer, in that case, is generally required to pay us for work performed and materials purchased through the date of termination and, in some instances, cancellation fees. In addition, a customer can potentially delay the execution of their project.

Deepwater projects have historically represented a significant part of our backlog. With respect to backlog at December 31, 2010, $343.4 million, or 70.6%, represented mostly two projects destined for deepwater locations. Depending on the size of the project, the termination or postponement of any one of our deepwater projects could significantly reduce our backlog, and could have a material adverse effect on revenue, net income and cash flow.

 

14


Table of Contents

The dangers inherent in our operations and the limits on insurance coverage could expose us to potentially significant liability costs and materially interfere with the performance of our operations.

The fabrication of large steel structures involves operating hazards that can cause personal injury or loss of life, severe damage to and destruction of property and equipment and suspension of operations. The failure of such structures during and after installation can result in similar injuries and damages. In addition, our employees may engage in certain activities, including interconnect piping and other service activities conducted on offshore platforms, activities performed on the spud barges owned or chartered by us, marine vessel fabrication and repair activities performed at our facilities, and operating vessels owned by us, that are covered in either the provisions of the Jones Act or USL&H. These laws operate to make the liability limits established under state workers’ compensation laws inapplicable to these employees and, instead, permit them or their representatives to pursue actions against us for damages or job related injuries, with generally no limitations on our potential liability.

Our ownership and operation of vessels can give rise to large and varied liability risks, such as risks of collisions with other vessels or structures, sinking, fires and other marine casualties, which can result in significant claims for damages against both us and third parties for, among other things, personal injury, death, property damage, pollution and loss of business. Litigation arising from any such occurrences may result in our being named as a defendant in lawsuits asserting large claims. In addition, due to their proximity to the Gulf of Mexico, our facilities are subject to the possibility of physical damage caused by hurricanes or flooding, as occurred in 2008.

Although we believe that our insurance coverage is adequate, there can be no assurance that we will be able to maintain adequate insurance in the future at rates we consider reasonable or that our insurance coverage will be adequate to cover future claims that may arise. Successful claims for which we are not fully insured may adversely affect our working capital and profitability. In addition, changes in the insurance industry have generally led to higher insurance costs and decreased availability of coverage. The availability of insurance that covers risks we and our competitors typically insure against may decrease, and the insurance that we are able to obtain may have higher deductibles, higher premiums and more restrictive policy terms.

Our industry is highly competitive.

The offshore platform industry is highly competitive and influenced by events largely outside of our control. Contracts for our services are generally awarded on a competitive bid basis, and our customers consider many factors when awarding a job. These factors include price, the contractor’s ability to meet the customer’s delivery schedule, and to a lesser extent, the availability and capability of equipment, and the reputation, experience and safety record of the contractor. Although we believe that our reputation for safety and quality service is good, we cannot guarantee that we will be able to maintain our competitive position. We compete with both large and small companies for available jobs, and certain of our competitors have greater financial and other resources than we do.

In addition, because of subsidies, import duties and fees, taxes imposed on foreign operators and lower wage rates in foreign countries, along with fluctuations in the value of the U.S. dollar and other factors, we may not be able to remain competitive with foreign contractors for projects designed for use in international locations as well as those designed for use in the Gulf of Mexico. See “Business and Properties—Competition” for more information regarding the competitive nature of our industry.

Competitive pricing common in the marine construction industry may not provide sufficient protection from cost overruns.

As is common in the offshore platform fabrication industry, a substantial number of our projects are performed on a fixed-price basis, although some projects are performed on an alliance/partnering or cost-plus basis. Under fixed-price or unit-rate contracts, we receive the price fixed in the contract, subject to adjustment

 

15


Table of Contents

only for change orders placed by the customer. Under a unit rate contract, material items or labor tasks are assigned unit rates of measure. The unit rates of measure will generally be an amount of dollars per ton, per foot, per square foot, per item installed, etc. A typical unit rate contract can contain hundreds to thousands of unit rates of measure that all accumulate to determine the total contract value. Profit margins are built in to the unit rates and, similar to a fixed price contract, we retain all cost savings but are also responsible for all cost overruns. Under typical alliance/partnering arrangements, the parties agree in advance to a target price that includes specified levels of labor and material costs and profit margins. If the project is completed at less cost than that targeted in the contract, the contract price is reduced by a portion of the savings. If the cost to completion is greater than target costs, the contract price is increased, but generally to the target price plus the actual incremental cost of materials and direct labor. Accordingly, under alliance/partnering arrangements, we have some protection against cost overruns but must share a portion of any cost savings with the customer. Under cost-plus arrangements, we receive a specified fee in excess of our direct labor and material cost and thus are protected against cost overruns but do not benefit directly from cost savings. Some contracts include a total or partial reimbursement to us of any costs associated with specific capital projects required by the fabrication process. If a capital project provides future benefits to us, the cost to build the capital project will be capitalized, and the revenue for the capital project will increase the estimated profit in the contract.

The revenue, costs and gross profit realized on a contract will often vary from the estimated amounts on which such contracts were originally based due to, among other things:

 

   

changes in the availability and cost of labor and material;

 

   

variations in productivity from the original estimates; and

 

   

changes in estimates or bidding.

These variations and the risks inherent in our industry may result in revenue and gross profits different from those originally estimated and reduce profitability or create losses on projects. Depending on the size of a project, variations from estimated contract performance can have a significant impact on our operating results for any particular fiscal quarter or year. See “Business and Properties—Customer and Contracting.”

Our method of accounting for revenue could result in an earnings charge.

Most of our revenue is recognized on a percentage-of-completion basis based on the ratio of direct labor hours worked to the total estimated direct labor hours required for completion. Accordingly, contract price and cost estimates are reviewed monthly as the work progresses, and adjustments proportionate to the percentage of completion are reflected in revenue for the period when such estimates are revised. To the extent that these adjustments result in a reduction or elimination of previously reported profits, we are required to recognize a charge against current earnings, which may be significant depending on the size of the project or the adjustment.

We are susceptible to adverse weather conditions in our market areas.

Our operations are directly affected by the seasonal differences in weather patterns in the Gulf of Mexico, as well as daylight hours. Since most of our construction activities take place outdoors, the number of direct labor hours worked generally declines in the winter months due to an increase in rainy and cold conditions and a decrease in daylight hours. The seasonality of oil and gas industry activity as a whole in the Gulf Coast region also affects our operations. Our customers often schedule the completion of their projects during the summer months in order to take advantage of the milder weather during such months for the installation of their platforms. The rainy weather, tropical storms, hurricanes and other storms prevalent in the Gulf of Mexico and along the Gulf Coast throughout the year, such as Hurricanes Gustav and Ike in 2008, may also affect our operations. Accordingly, our operating results may vary from quarter to quarter, depending on factors outside of our control. As a result, full year results are not likely to be a direct multiple of any particular quarter or combination of quarters.

 

16


Table of Contents

We depend on key personnel.

Our success depends to a great degree on the abilities of our key management personnel, particularly our Chief Executive Officer and other high-ranking executives. The loss of the services of one or more of these key employees could adversely affect us.

We depend on significant customers.

We derive a significant amount of our revenue from a small number of major and independent oil and gas companies, although not necessarily the same customers from year to year. Because the level of fabrication that we may provide to any particular customer depends, among other things, on the size of that customer’s capital expenditure budget devoted to platform construction plans in a particular year and our ability to meet the customer’s delivery schedule, customers that account for a significant portion of our revenue in one fiscal year may represent an immaterial portion of revenue in subsequent years. For example, our largest customers (those which individually accounted for more than 10% of revenue in a given year) accounted for 38% of revenue in 2010 (16% for Eni US Operating Co. Inc., 11% for American Electric Power Service Corporation and 11% for Versabuild, LLC ), 48% of revenue in 2009 (36% for Bluewater Industries, Inc. and 12% for Eni US Operating Co. Inc.), and 54% of revenue in 2008 (37% for Bluewater Industries, Inc. and 17% for Daewoo Shipbuilding and Marine Engineering, Ltd.). The loss of a significant customer for any reason, including a sustained decline in that customer’s capital expenditure budget or competitive factors, can result in a substantial loss of revenue and could have a material adverse effect on our operating performance.

The nature of our industry subjects us to compliance with regulatory and environmental laws.

Our operations and properties are materially affected by state and federal laws and other regulations relating to the oil and gas industry in general, and are also subject to a wide variety of foreign, federal, state and local environmental laws and regulations, including those governing discharges into the air and water, the handling and disposal of solid and hazardous wastes, the remediation of soil and groundwater contaminated by hazardous substances and the health and safety of employees. Further, compliance with many of these laws is becoming increasingly complex, stringent and expensive. Many impose “strict liability” for damages to natural resources or threats to public health and safety, rendering a party liable for the environmental damage without regard to its negligence or fault. Certain environmental laws provide for strict, joint and several liability for remediation of spills and other releases of hazardous substances, as well as damage to natural resources. In addition, we could be subject to claims alleging personal injury or property damage as a result of alleged exposure to hazardous substances. Such laws and regulations may also expose us to liability for the conduct of or conditions caused by others, or for acts that were in compliance with all applicable laws at the time such acts were performed. We believe that our present operations substantially comply with applicable federal and state pollution control and environmental protection laws and regulations. We also believe that compliance with such laws has had no material adverse effect on our operations. However, such environmental laws are changed frequently. Sanctions for noncompliance may include revocation of permits, corrective action orders, administrative or civil penalties and criminal prosecution. We are unable to predict whether environmental laws will materially adversely affect our future operations and financial results. See “Business and Properties—Government and Environmental Regulations.”

The demand for our services is also affected by changing taxes, price controls and other laws and regulations relating to the oil and gas industry generally. Offshore construction and drilling in certain areas has also been opposed by environmental groups and, in certain areas, has been restricted. To the extent laws are enacted or other governmental actions are taken that prohibit or restrict offshore construction and drilling or impose environmental protection requirements that result in increased costs to the oil and gas industry in general and the offshore construction industry in particular, our business and prospects could be adversely affected. We cannot determine to what extent future operations and earnings may be affected by new legislation, new regulations or changes in existing regulations.

 

17


Table of Contents

Our business is highly dependent on our ability to utilize the Houma Navigational Canal.

The Houma Navigation Canal provides the only means of access from our Louisiana facilities to open waters. The Houma Navigation Canal is considered to be a navigable waterway of the United States and, as such, is protected by federal law from unauthorized obstructions that would hinder water-borne traffic. Federal law also authorizes federal maintenance of the canal by the United States Corps of Engineers. The canal requires bi-annual dredging to maintain its water depth and, while federal funding for this dredging has been provided for over 40 years, there is no assurance that Congressional appropriations sufficient for adequate dredging and other maintenance of the canal will be continued indefinitely. If sufficient funding were not appropriated for that purpose, the Houma Navigation Canal could become impassable by barges or other vessels required to transport many of our products and could result in material and adverse affects on our operations and financial position.

We may not collect all or part of $5.9 million currently receivable from our insurance provider in connection with a crane accident.

At December 31, 2010, we have recorded $5.9 million, net of advances received from our insurance provider, in “Other receivables” related to an insurance claim for costs that we have determined are recoverable under our various insurance policies. Certain costs that were deemed unrecoverable based on either our insurance coverage or our deductibles related to these insurance claims were expensed at the time incurred. The amounts of the deductibles associated with our various insurance policies are generally based on a percentage of the repair costs. Until all property is restored to pre-damaged condition, we will incur costs for repairs and record the deductibles accordingly. We have not recorded any gains related to this claim in our income statement and will not record any gains until the claim is settled.

The $5.9 million claim relates to costs incurred in connection with an accident that occurred in April 2008 at our Texas facility involving four cranes. This amount represents costs incurred by us to rent replacement cranes while our damaged cranes were repaired. In addition, we have one crane with a carrying value of approximately $2.9 million that is pending determination from the insurance carrier whether to repair or replace that crane. Our insurance provider has filed a declaratory judgment action in U.S. District Court, Eastern District of Louisiana seeking to deny insurance coverage of the costs of renting cranes to mitigate business-interruption damages that might otherwise have been incurred as a result of the accident. We are defending ourselves from the insurer’s request for a declaratory judgment that crane-rental coverage is limited to $450,000, when in fact we believe there is coverage for all amounts that have been, or will be, expended under the terms of the policy.

A hearing was held in January 2011 and we are awaiting a final ruling from that hearing with respect to our claim. We intend to continue to pursue this matter through these legal proceedings and although there can be no assurances made as to the ultimate outcome, we, in consultation with outside legal counsel, believe it is probable that all of our claim will ultimately be fully recoverable under our insurance policies. In January 2011, we deposited a $1.1 million check from our insurance provider toward the total loss of the damaged crane discussed above involved in the accident, without prejudice to our continuing to pursue full recovery.

The Deepwater Horizon incident could have a material adverse effect on our oil and gas fabrication operations.

In April 2010, the drilling rig Deepwater Horizon, which was engaged in deepwater drilling operations in the Gulf of Mexico, sank after an explosion and fire, resulting in one of the most significant oil spills in U.S. history. As a result, on May 28, 2010, the DOI imposed a six-month moratorium on offshore deepwater drilling operations, the enforcement of which was preliminarily enjoined. On July 12, 2010, the DOI imposed another similar moratorium set to expire November 30, 2010. As a result, deepwater drilling operations in the Gulf of Mexico were suspended. On October 12, 2010, the DOI lifted the moratorium on deepwater drilling. Although the moratorium has been lifted, the BOEM has issued regulations regarding safety, environmental matters and drilling and may take additional actions that could adversely affect drilling activity in the Gulf of Mexico. It is not possible to estimate whether or when drilling operations in the Gulf of Mexico will return to normal activity levels.

 

18


Table of Contents

We believe that the Deepwater Horizon incident is likely to result in increased exploration and production costs, increased regulation of deepwater drilling operations and greater difficulty in obtaining drilling permits. Any one or more of these may cause some of our customers to decrease or eliminate drilling activities in the Gulf of Mexico, which could have a material adverse effect on our business.

Item 1B. Unresolved Staff Comments

None.

Item 3. Legal Proceedings

We are subject to various routine legal proceedings in the normal conduct of our business primarily involving commercial claims, workers’ compensation claims, and claims for personal injury under general maritime laws of the United States and the Jones Act. See Note 6 to the Notes to the Consolidated Financial Statements for additional information concerning our outstanding proceedings. While the outcome of these lawsuits, legal proceedings and claims cannot be predicted with certainty, management believes that the outcome of any such proceedings, even if determined adversely, would not have a material adverse effect on our financial position, results of operations or cash flows.

Item 4. Reserved

Executive Officers of the Registrant

Listed below are the names, ages and offices held by each of our executive officers as of February 28, 2011. All officers serve at the pleasure of our Board of Directors.

 

Name

  

Age

  

Position

Kerry J. Chauvin

   63    Chairman of the Board and Chief Executive Officer

Kirk J. Meche

   48    President and Chief Operating Officer

Robin A. Seibert

   54    Vice President—Finance, Chief Financial Officer, Chief Accounting Officer and Treasurer

William G. Blanchard

   52    President and Chief Executive Officer of Gulf Island, L.L.C. (fabrication subsidiary)

Francis A. Smith, Jr.

   61    President and Chief Executive Officer of Gulf Marine Fabricators, L.P. (fabrication subsidiary)

Kerry J. Chauvin has served as Chairman of the Board since April 2001. Mr. Chauvin has served as the Chief Executive Officer since January 1990 and as President from inception until January 2009. Mr. Chauvin also served as Chief Operating Officer from January 1989 to January 1990.

Kirk J. Meche became President and Chief Operating Officer in January 2009. Mr. Meche served as the Executive Vice President—Operations from 2001 to 2009. Mr. Meche was President and Chief Executive Officer of Gulf Marine Fabricators from February 2006 to October 2006. Mr. Meche served as President and Chief Executive Officer of Gulf Island from February 2001 until January 2006.

Robin A. Seibert became Vice President—Finance and Chief Financial Officer and Treasurer in October 2007. Mr. Seibert served as Controller from 1997 until 2007 and Chief Accounting Officer since 1998.

William G. “Bill” Blanchard became President and Chief Executive Officer of Gulf Island in February 2006. Mr. Blanchard was Estimating Department Manager of Gulf Island from January 2000 until January 2006.

Francis A. Smith, Jr. became President and Chief Executive Officer of Gulf Marine Fabricators in March 2009. From July 2004 to March 2009, Mr. Smith was an Independent Consultant. From 1973 to 2004, Mr. Smith held positions in various capacities with J. Ray McDermott and McDermott, Inc. including Vice-President and General Manager, Fabrication Division, except from 1991 to 1994 when he held the position of Vice President, Fabrication for OPI.

 

19


Table of Contents

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock is traded on the Nasdaq Global Select Market, under the symbol “GIFI.” As of February 28, 2011, we had approximately 3,100 holders of record of our common stock.

The following table sets forth the high and low sale prices per share of the common stock, as reported by The Nasdaq Stock Market LLC and the amount of cash dividends per share declared our common stock, for each fiscal quarter of the two most recent fiscal years.

 

     High      Low      Dividend  

Fiscal Year 2010

        

First Quarter

   $ 22.80       $ 16.70       $ .01   

Second Quarter

     27.74         14.18         .01   

Third Quarter

     18.54         14.47         .01   

Fourth Quarter

     30.56         18.01         .01   

Fiscal Year 2009

        

First Quarter

   $ 16.90       $ 4.92       $ .10   

Second Quarter

     17.45         7.61         .01   

Third Quarter

     20.65         13.00         .01   

Fourth Quarter

     22.90         17.31         .01   

Our Board of Directors declared a dividend of $0.10 per share on the shares of our common stock outstanding for the first quarter of 2009. For the remaining quarters of 2009, our Board of Directors reduced the quarterly dividend to $0.01 per share in order to preserve cash, further strengthen our balance sheet and enhance our financial flexibility. Our dividends for 2009 totaled $1.9 million. In each quarter of 2010, our Board of Directors declared a dividend of $0.01 per share on the shares of our common stock outstanding, totaling $579,000. On February 24, 2011, our Board of Directors declared a dividend of $0.06 per share on the shares of our common stock outstanding, payable March 28, 2011 to shareholders of record on March 14, 2011. Any future declaration and payment of dividends, if any, is at the discretion of our Board of Directors and will depend on our retained earnings, working capital requirements and the future operation and growth of our business and other factors deemed relevant by the Board of Directors.

Issuer Purchases of Equity Securities

The following table sets forth shares of our common stock we repurchased during the three-month period ended December 31, 2010.

 

                  Current Program  

Period

   Total
number of
Shares
Purchased
    Average
Price
Paid Per
Share
     Total Number
of Shares Purchased
as part of Publicly
Announced Plans or
Programs
     Maximum
Number of Shares
That May Yet Be
Purchased Under
Plans or Programs
 

October 1 to 31, 2010

     —          —           —           —     

November 1 to 30, 2010

     —          —           —           —     

December 1 to 31, 2010

     4,690 a    $ 29.84         —           —     
                      

Total

     4,690 a    $ 29.84         —           —     
                      

 

a. Represents shares repurchased under our applicable stock incentive plan to satisfy tax obligations on restricted stock awards. We do not have a publicly announced share repurchase program.

Information as to the securities authorized for issuance under our equity compensation plans is incorporated herein by reference to Item 12 of this report on Form 10-K.

 

20


Table of Contents

Stock Performance Graph

The following graph compares the cumulative total shareholder return on our common stock from December 31, 2005 to December 31, 2010, with the cumulative total return of the Standard & Poor 500 Index and the Standard & Poor 500 Oil & Gas Equipment & Services Index for the same period. The returns are based on an assumed investment of $100 on January 1, 2006 at closing prices on December 31, 2005 in our common stock and in each of the indexes and on the assumption that dividends were reinvested.

 

            ANNUAL RETURN PERCENTAGE
Years Ending
 

Company / Index

          Dec06      Dec07      Dec08      Dec09      Dec10  

Gulf Island Fabrication, Inc.

        53.52         -12.97         -53.86         48.02         34.27   

S&P 500 Index

        15.79         5.49         -37.00         26.46         15.06   

S&P 500 Oil & Gas Equipment & Services

        15.54         47.90         -59.18         59.79         39.28   
     Base
Period
Jan. 1, 06
     INDEXED RETURNS
Years Ending
 

Company / Index

      Dec06      Dec07      Dec08      Dec09      Dec10  

Gulf Island Fabrication, Inc.  

     100         153.52         133.61         61.64         91.24         122.52   

S&P 500 Index

     100         115.79         122.16         76.96         97.33         111.99   

S&P 500 Oil & Gas Equipment & Services

     100         115.54         170.88         69.76         111.47         155.25   

LOGO

 

21


Table of Contents

Item 6. Selected Financial Data

The following table sets forth selected historical financial data as of the dates and for the periods indicated. The historical financial data for each year in the five-year period ended December 31, 2010 are derived from our audited financial statements. The following information should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operation” and our financial statements and notes thereto included elsewhere in this report.

 

    Years Ended December 31,  
    2010     2009     2008     2007     2006 (1)  
    (in thousands, except per share data)  

Income Statement Data:

         

Revenue

  $ 248,286      $ 311,529      $ 420,507      $ 472,739      $ 312,181   

Cost of revenue

    225,015        272,064        368,211        415,901        273,768   
                                       

Gross profit

    23,271        39,465        52,296        56,838        38,413   

General and administrative expenses

    7,947        8,257        9,451        10,359        9,137   
                                       

Operating income

    15,324        31,208        42,845        46,479        29,276   

Net interest income (2)

    5,021        986        172        384        (114

Other, net income (expense)

    1,014        (55     (97     (10     1,261   
                                       

Income before income taxes

    21,359        32,139        42,920        46,853        30,423   

Income taxes

    8,266        11,335        13,898        15,686        9,098   
                                       

Net income

  $ 13,093      $ 20,804      $ 29,022      $ 31,167      $ 21,325   
                                       

Income Summary Data:

         

Basic earnings per share—common shareholders

  $ 0.90      $ 1.44      $ 2.03      $ 2.19      $ 1.54   
                                       

Diluted earnings per share—common shareholders

  $ 0.90      $ 1.44      $ 2.02      $ 2.17      $ 1.53   
                                       

Basic weighted-average common shares

    14,318        14,294        14,258        14,161        13,812   
                                       

Adjusted weighted-average common shares

    14,329        14,295        14,292        14,260        13,876   
                                       

Cash dividend declared per common share

  $ 0.04      $ 0.13      $ 0.40      $ 0.40      $ 0.30   
                                       
    As of December 31,  
    2010     2009     2008     2007     2006  
                (in thousands)        

Balance Sheet Data:

         

Working capital

  $ 112,111      $ 80,501      $ 63,060      $ 57,384      $ 54,551   

Property, plant and equipment, net

    197,652        200,459        204,695        188,766        155,440   

Total assets

    334,856        332,175        349,270        325,213        251,448   

Debt

    —          —          —          —          —     

Operating Data:

         

Direct labor hours worked for the year ended December 31, (3)

    2,403        3,156        3,820        3,582        3,315   

Backlog as of December 31, (4)

         

Direct labor hours

    3,837        1,495        2,321        3,682        4,028   

Dollars

  $ 486,146      $ 136,766      $ 209,823      $ 330,445      $ 429,080   

 

(1) Effective January 31, 2006, we acquired the facilities, machinery and equipment of Gulf Marine Fabricators located in San Patricio and Nueces Counties, Texas.
(2)

On July 15, 2009, we reached an agreement with Bluewater Industries, Inc. to restructure the payment terms of the remaining $90 million owed on the MinDOC I project. We received a limited overriding royalty interest for $48 million of this amount as part of this agreement. On November 29, 2010, we sold the

 

22


Table of Contents
 

overriding royalty interest. As a result of this agreement and subsequent sale of our overriding royalty interest, we recognized $4.6 million and $961,000 as interest income during the years ended December 31, 2010 and 2009, respectively.

(3) Direct labor hours are hours worked by employees directly involved in the production of our products.
(4)

Our backlog is based on management’s estimate of the number of direct labor hours required to complete, and the remaining revenues to be recognized with respect to, those projects for which we have a signed contract and a customer has authorized us to begin work or purchase materials. The backlog as of each year end includes commitments received following December 31st, as described in Item 1.

 

23


Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Introduction and Outlook

Our results of operations are affected primarily by (i) the level of exploration and development activity maintained by oil and gas exploration and production companies in the Gulf of Mexico, and to a lesser extent, foreign locations throughout the world, (ii) our ability to win contracts through competitive bidding or alliance/partnering arrangements, and (iii) our ability to manage those contracts to successful completion. The level of exploration and development activity is related to several factors, including trends in oil and gas prices, expectations of future oil and gas prices, changes in technology and changes in the regulatory environment, including new permitting processes and increased regulation imposed on domestic oil and gas exploration by the Bureau of Ocean Energy, Regulation and Enforcement.

We believe the downturn in the oil and gas industry that began in late 2008 brought on by the rapid decline in oil and gas prices adversely impacted our business during 2009 and 2010, but will begin to reverse in 2011. Oil prices have continued to increase since they fell below $40 a barrel in early 2009 and are now $80 to $90 a barrel and could possibly increase further. As a result, the ability of oil and gas producers to raise capital has improved and bidding activity, particularly for deepwater projects, has increased. We believe margins will begin to improve as production volumes increase based on projects currently in our backlog. Cost reduction measures were taken during the last two years and will continue to be monitored as production levels increase. We will continue to focus on managing the increasing costs of raw materials and restoring our labor force. In the longer term, demand for our products and services will continue to depend largely upon prices for oil and gas and our customer’s cost of regulatory compliance, which at this time is difficult to predict. However, we believe current oil prices will be maintained and supported by domestic and foreign demand and as the changing domestic regulatory environment can be managed profitably by our customers.

Backlog

Our backlog is based on management’s estimate of the direct labor hours required to complete, and the remaining revenue to be recognized with respect to, those projects as to which a customer has authorized us to begin work or purchase materials pursuant to written contracts, letters of intent or other forms of authorization. Often, however, management’s estimates are based on incomplete engineering and design specifications. As engineering and design plans are finalized or changes to existing plans are made, management’s estimate of the direct labor hours required to complete and price at completion is likely to change. In addition, all projects currently included in our backlog are subject to termination at the option of the customer, although the customer, in that case, is generally required to pay us for work performed and materials purchased through the date of termination and, in some instances, cancellation fees. In addition, a customer can potentially delay the execution of their project.

As of December 31, 2010, we had a revenue backlog of $486.1 million and a labor backlog of approximately 3.8 million man-hours remaining to work, which consists of work remaining at December 31, 2010 and commitments received through February 28, 2011, compared to the revenue backlog of $136.8 million and a labor backlog of 1.5 million man-hours reported as of December 31, 2009. Our backlog as of December 31, 2010 includes amounts associated with a contract for the fabrication and integration of the topsides on a deepwater Gulf of Mexico project we received and announced on November 23, 2010. Of the backlog at December 31, 2010, 64.1% represents projects for one major global oil and gas company.

Of the backlog at December 31, 2010, $343.4 million, or 70.6%, represented projects destined for deepwater locations compared to $19.9 million, or 14.5%, of projects destined for deepwater locations included in the December 31, 2009 backlog. Depending on the size of the project, the termination or postponement of any one of our deepwater projects could significantly reduce our backlog, and could have a material adverse effect on revenue, net income and cash flow.

 

24


Table of Contents

Of the backlog at December 31, 2010, we expect to recognize revenues of approximately $304.6 million (62.7%) during calendar year 2011, $177.5 million during calendar year 2012 and the remaining $4.0 million thereafter.

Workforce

During 2010, our workforce ranged from approximately 1,250 to 1,400. Demand for our products and services dictates our workforce needs. Although we generally try to minimize the use of contract labor, we will use contract labor when required to meet customer demand. For 2010, our use of contract labor ranged from approximately 10 to 40 contract laborers.

The workforce was reduced during 2010 as a cost reduction measure. Due to the recent award of significant contracts, we will again focus on hiring employees in 2011 to meet the increasing level of activity.

Critical Accounting Policies

Our consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States, which require us to make estimates and assumptions. We believe that of our significant accounting policies (see Note 1 in the Notes to Consolidated Financial Statements), the following involves a higher degree of judgment and complexity:

Revenue Recognition

The majority of our revenue is recognized on a percentage-of-completion basis based on the ratio of direct labor hours actually performed to date compared to the total estimated direct labor hours required for completion. Accordingly, contract price and cost estimates are reviewed monthly as the work progresses, and adjustments proportionate to the percentage of completion are reflected in revenue for the period when such estimates are revised. If these adjustments were to result in a reduction of previously reported profits, we would have to recognize a charge against current earnings, which may be significant depending on the size of the project or the adjustment.

Some contracts include a total or partial reimbursement to us of any costs associated with specific capital projects required by the fabrication process. If a particular capital project provides future benefits to us, the cost to build the capital project will be capitalized, and the revenue for the capital project will increase the estimated profit in the contract.

Contract costs include all direct material, labor and subcontract costs and those indirect costs related to contract performance, such as indirect labor, supplies and tools. Also included in contract costs are a portion of those indirect contract costs related to plant capacity, such as depreciation, insurance and repairs and maintenance. These indirect costs are allocated to jobs based on actual direct labor hours incurred. Profit incentives are included in revenue when their realization is probable. Claims for extra work or changes in scope of work are included in revenue when the amount can be reliably estimated and collection is probable. No revenues were recorded at December 31, 2010 related to unapproved change orders. We had $468,000 of change orders, approved as to scope but not price, recorded at December 31, 2009 that were approved in the first quarter of 2010. We had $6.9 million of change orders, related to re-measure issues primarily involving one customer, recorded at December 31, 2008. These issues were settled and resulted in the recognition of an additional $400,000 of revenue in the first quarter of 2009. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. We recognized contract losses of $1.3 million, $1.4 million, and $1.2 million in the years ended December 31, 2010, 2009, and 2008, respectively.

 

25


Table of Contents

Results of Operations

Comparison of the Years Ended December 31, 2010 and 2009

For the twelve month period ended December 31, 2010, our revenue was $248.3 million, a decrease of 20.3%, compared to $311.5 million in revenue for the twelve month period ended December 31, 2009. The following factors contributed to the decrease in revenues for the year ended December 31, 2010 compared to the year ended December 31, 2009:

 

   

Man-hours worked have decreased from 3.2 million for the twelve-month period ended December 31, 2009 to 2.4 million during the twelve-month period ended December 31, 2010, representing a decrease of 25.0%.

 

   

The most significant impact of the reduction in man-hours worked was to our Texas facility which is a direct result of the reduction in new job awards for deepwater projects. Since 2006, the majority of the work performed at our Texas facility was on larger deepwater projects. The MinDOC hull was the last large deepwater project fabricated in our Texas facility and it sailed in November 2009. Until November 23, 2010, the fabrication awards for the facility have been limited to large diameter tanks, multi-size modules and a 10,000 ton lifting system. Consequently, the decrease in activity at our Texas facility during 2010 contributed to the majority of the decrease in man-hours.

For the twelve month periods ended December 31, 2010 and 2009, gross profit was $23.3 million (9.4% of revenue) for 2010 and $39.5 million (12.7% of revenue) for 2009. The low level of production man-hours at our Texas facility during 2010 did not allow us to cover certain fixed costs, which contributed to the decrease in gross margin. Although we reduced costs at the facility, certain fixed costs could not be eliminated. With the recent award of the contract for the fabrication and integration of the topsides on a deepwater Gulf of Mexico project, as evidenced in backlog, in 2011 we anticipate gross margins will improve as the man-hours worked increase at our Texas facility.

Our general and administrative expenses were $7.9 million for the twelve month period ended December 31, 2010. This compares to $8.3 million for the twelve-month period ended December 31, 2009. Although the absolute dollar value was less, the percentage of revenue, general and administrative expenses were 3.2% of revenue compared to 2.7% of revenue for the twelve month periods ended December 31, 2010 and 2009, respectively. The reduction in general and administrative expenses for the twelve-month period ended December 31, 2010 compared to December 31, 2009 was primarily due to a reduction in the number of personnel and related cost (salaries, wages and benefit related costs). Also contributing to the reduction of general and administrative costs was a reduction in professional service fees.

We had net interest income of $5.0 million for the twelve month period ended December 31, 2010, compared to net interest income of $986,000 for the twelve month period ended December 31, 2009. The increase in interest income is primarily related to interest income recognized with respect to the financing arrangement with Bluewater and ATP on the fabrication of the MinDOC I project. On November 29, 2010, we sold the limited overriding royalty interest with respect to this arrangement to an undisclosed buyer. See Note 2 to in the Notes to the Consolidated Financial Statements.

We had other income of $1.0 million for the twelve months ended December 31, 2010, compared to a $55,000 loss for the twelve months ended December 31, 2009. The increase in other income is a result of the settlement of claims related to damages incurred in connection with the hurricanes that hit the Gulf Coast in 2008.

Our effective rate was 38.7% for the twelve-month period ended December 31, 2010, compared to 35.3% for the twelve-month period ended December 31, 2009. The increase relates primarily to the Federal Work Opportunity Tax Credits (WOTC) available to us in 2009, which were no longer available in 2010, a decrease in the Federal qualified production activities income deduction due to a decrease in activity at our Texas facility,

 

26


Table of Contents

and an increase in Louisiana state income tax apportionments for 2010. We believe in 2011 our effective tax rate will decrease with the expected increase in activity at our Texas facility and, as a result, the increase in the Federal qualified production activities income deduction.

Comparison of the Years Ended December 31, 2009 and 2008

For the twelve month period ended December 31, 2009, our revenue was $311.5 million, a decrease of 25.9%, compared to $420.5 million in revenue for the twelve month period ended December 31, 2008. The following factors contributed to the decrease in revenue for the year ended December 31, 2009 compared to the year ended December 31, 2008:

 

   

Lack of jobs added to the backlog for several quarters.

 

   

Pass through cost decreased 4.6% from 41.2% of revenue for the twelve month period ended December 31, 2008 to 36.6% for the twelve month period ended December 31, 2009, see Note 12 in the Notes to the Consolidated Financial Statements.

 

   

The amount of man-hours worked decreased from 3.8 million for the twelve-month period ended December 31, 2008 to 3.2 million during the twelve-month period ended December 31, 2009, representing a decrease of 15.8%.

We had $468,000 of change orders, approved as to scope but not price, recorded at December 31, 2009 that were approved in the first quarter of 2010. We had $6.9 million of change orders, related to re-measure issues primarily involving one customer, recorded at December 31, 2008. These issues were settled and resulted in the recognition of an additional $400,000 of revenue in the first quarter of 2009.

For the twelve month periods ended December 31, 2009 and 2008, gross profit was $39.5 million (12.7% of revenue) for 2009 and $52.3 million (12.4% of revenue) for 2008.

The following factors contributed to the increase in gross margin percentage for the twelve months ended December 31, 2009:

 

   

Activity levels in 2009 allowed us to decrease our reliance on contract labor used to supplement our labor force necessary to complete the major projects in progress. Generally, contract labor employees perform less efficiently than company employees, which is normally due to the amount of training, work experience and turnover. During 2009, our weighted-average number of contract employees was 70 employees compared to 294 contract employees for 2008, a reduction of 76.2%. During the twelve months ended December 31, 2009, contract labor represented 7.6% of man-hours worked, compared to 19.0% for the twelve months ended December 31, 2008. As of December 31, 2009, the total number of contract employees in all facilities is 53.

 

   

Cost reduction measures, including a reduction in overhead labor costs, were undertaken since the fourth quarter of 2008 to meet the decline in economic conditions we experienced beginning in 2009.

Our general and administrative expenses were $8.3 million for the twelve month period ended December 31, 2009. This compares to $9.5 million for the twelve-month period ended December 31, 2008. As a percentage of revenue, general and administrative expenses were 2.7% of revenue compared to 2.2% of revenue for the twelve month periods ended December 31, 2009 and 2008. The reduction in general and administrative expenses for the twelve-month period ended December 31, 2009 compared to December 31, 2008 was primarily due to a reduction in the number of personnel and related cost (salaries, wages and benefit related costs). Also contributing to the reduction of general and administrative costs was a reduction in professional service fees.

We had net interest income of $986,000 for the twelve month period ended December 31, 2009, compared to net interest income of $172,000 for the twelve month period ended December 31, 2008. The increase in interest income is primarily related to the amortization of the discount associated with the financing arrangement with Bluewater and ATP on the fabrication of the MinDOC I project, see Note 2 in the Notes to the Consolidated Financial Statements.

 

27


Table of Contents

Our effective income tax rate was 35.3% for the twelve month period ended December 31, 2009, compared to 32.4% for the twelve month period ended December 31, 2008. The increase from the previous twelve-month period is the result of the limitations on certain federal manufacturing tax credits based on our estimated tax provision for 2009, a reduction in the Federal Work Opportunity Tax Credit (WOTC) available to us in 2009 and a slight increase in state taxes related to an increase in the state taxable income apportionment.

Liquidity and Capital Resources

Historically we have funded our business activities through funds generated from operations. Effective July 15, 2010, we entered into the Ninth Amendment to the Ninth Amended and Restated Credit Agreement (the “Revolver”) which, among other things, extended the term of the $60 million Revolver from December 31, 2011 to December 31, 2012. The Revolver is secured by some of our real estate, machinery and equipment, and fixtures. Amounts borrowed under the Revolver bear interest, at our option, at the prime lending rate established by JPMorgan Chase Bank, N.A. or LIBOR plus 1.5%. We pay a fee on a quarterly basis of one-fourth of one percent per annum on the weighted-average unused portion of the Revolver.

At December 31, 2010, no amounts were borrowed under the Revolver, but we had letters of credit outstanding totaling $9.7 million. As of February 28, 2011, $8.2 million of these letters of credit outstanding expired, which increased the unused portion of the Revolver to $58.5 million. We are required to maintain certain covenants, including balance sheet and cash flow ratios. As of December 31, 2010, the Company was in compliance with these covenants.

At December 31, 2010, our cash and cash equivalents totaled $88 million. Working capital was $112.1 million at December 31, 2010. The ratio of current assets to current liabilities was 7.06 to 1 at December 31, 2010. Net cash provided by operating activities was $96.1 million for the year ended December 31, 2010, compared to $11.0 million for the year ended December 31, 2009. This increase was due to an improvement in our net contract position of $95.7 million for the twelve months ended December 31, 2010 as compared to the twelve months ended December 31, 2009. The change in net contract position primarily resulted from our collection of the remaining $75.4 million on the MinDoc project during the twelve months ended December 31, 2010. Changes to our contract position include changes in contracts receivable, contract retainage, costs and estimated earnings in excess of billings on uncompleted contracts, accounts payable, and billings in excess of costs and estimated earnings on uncompleted contracts. An overall positive increase in these contract related accounts represents more cash on hand for future working capital needs and less cash utilized by contracts in progress

Partially offsetting the change in our net contract position was our earnings decrease of $7.7 million for the twelve months ending December 31, 2010, compared to the twelve months ending December 31, 2009, due to the decrease in man-hours worked. The amount of man-hours worked was 2.4 million during the twelve-month period ending December 31, 2010 as compared to 3.2 million for the twelve-month period ending December 31, 2009.

Net cash used in investing activities for the year ended December 31, 2010, was $16.5 million, which related to capital expenditures for equipment and improvements to our production facilities. Included in capital expenditures for the twelve months ended December 31, 2010 was $6.2 million for a fabrication shop and warehouse in the west yard of our Gulf Island facility to support our increase in marine activities. Also included in capital expenditures for the period was $3.0 million representing approximately one-half of the cost of constructing a gate for the graving dock at our Gulf Marine facilities. The graving dock gate is expected to be completed in the late first quarter or early second quarter of 2011.

We anticipate capital expenditures for 2011 to be approximately $35.0 million for the purchase of equipment and additional yard and facility infrastructure improvements, including $1.4 million for the completion of the graving dock gate located in our Gulf Marine facilities. The gate will allow us to open and

 

28


Table of Contents

close the entrance of the graving dock within a few days as opposed to a few weeks. We believe the new gate will improve our efficiency and enhance services to our customers through a shorter dock turn-around. Also included is $10.8 million for two Manitowac 18000 cranes, each with a lifting capacity of 660 tons, for our Gulf Marine facilities. These cranes were delivered in the first quarter of 2011. This additional lifting capacity creates greater efficiencies as we work on future deepwater projects. In addition, $4.0 million is included for six additional KAMAG Type 2406 modular transporters to be delivered to our Gulf Island facilities in the third quarter of 2011. These additional transporters will create more scheduling flexibility for our customers and provide additional efficiencies during project assembly and load-out.

The $354,000 of net cash used in financing activities for the year ended December 31, 2010 included $101,000 of proceeds from the exercise of stock options and $124,000 of excess tax benefits associated with the share-based payment arrangements less $579,000 in payments of dividends on common stock.

We believe that for the next twelve months, our cash on hand, our cash generated by operating activities and funds available under the Revolver will be sufficient to fund our capital expenditures and meet our working capital needs. However, job awards may require us to issue additional letters of credit further reducing the capacity available on our Revolver. We may also expand our operations through acquisitions in the future, which may require additional equity or debt financing which we believe would be available to us; however, there can be no assurance that amounts will be available on commercial terms acceptable to us.

The following table sets forth an aggregation of our contractual obligations and commitments as of December 31, 2010, (in thousands).

 

     Total      Less Than
1 Year
     1 to 3
Years
     3 to 5
Years
     Thereafter  

Purchase commitment—equipment (1)

   $ 15,000       $ 15,000       $ —         $ —         $ —     

Purchase commitment—material and services (2)

     4,631         4,631         —           —           —     
                                            
   $ 19,631       $ 19,631       $ —         $ —        
                                            

 

(1) “Purchase commitment—equipment” is a commitment related to purchase order agreements.
(2) “Purchase commitment—material and services” is a commitment related to purchase order agreements.

Off Balance Sheet Arrangements

We are not a party to any contract or other obligation not included in our balance sheet that has, or is reasonably likely to have, a current or future effect on our financial condition.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

We do not have operations subject to material risk of foreign currency fluctuations, nor do we use derivative financial instruments in our operations or investment portfolio. We have a $60.0 million line of credit with our primary commercial banks. Under the terms of the Revolver, we may elect to pay interest at either a fluctuating base rate established by the bank from time to time or at a rate based on the rate established in the London inter-bank market. We do not believe that we have any material exposure to market risk associated with interest rates.

Item 8. Financial Statements and Supplementary Data

In this report our consolidated financial statements of and the accompanying notes appear on pages F-1 through F-19 and are incorporated herein by reference. See Index to Consolidated Financial Statements on Page 34.

 

29


Table of Contents

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None

Item 9A. Controls and Procedures

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this report. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that the design and operation of our disclosure controls and procedures were effective as of such date to provide assurance that information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission, and that such information is accumulated and communicated to management as appropriate to allow timely decisions regarding disclosure.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f). Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation under the framework in Internal Control—Integrated Framework, our management concluded that our internal control over financial reporting was effective as of December 31, 2010.

The effectiveness of our internal control over financial reporting as of December 31, 2010 has been audited by Ernst & Young LLP, an independent registered public accounting firm, as stated in their report which is included herein.

 

30


Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders

Gulf Island Fabrication, Inc.

We have audited Gulf Island Fabrication, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Gulf Island Fabrication, Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Gulf Island Fabrication, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on the COSO criteria.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the accompanying consolidated balance sheets of Gulf Island Fabrication, Inc. as of December 31, 2010 and 2009, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2010, and our report dated February 28, 2011, expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

New Orleans, Louisiana

February 28, 2011

 

31


Table of Contents

Item 9B. Other Information

Not applicable.

PART III

Item 10. Directors, Executive Officers and Corporate Governance

The information regarding executive officers called for by this item may be found following Item 4 of this report on Form 10-K under the caption “Executive Officers of the Registrant” and is incorporated herein by reference.

We have adopted a Code of Ethics for the Chief Executive Officer and Senior Financial Officers (the “Code of Ethics”) and a Code of Business Conduct and Ethics, which applies to all employees and directors, including the Chief Executive Officers and Senior Financial Officers. These codes are available to the public on our website at www.gulfisland.com. Any substantive amendments to the Code of Ethics or any waivers granted under the Code of Ethics will be disclosed within five days of such event on our website.

The remaining information called for by this item may be found in our definitive Proxy Statement prepared in connection with the 2011 Annual Meeting of Shareholders and is incorporated herein by reference.

Item 11. Executive Compensation

Information called for by this item may be found in our definitive Proxy Statement prepared in connection with the 2011 Annual Meeting of Shareholders and is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

Information regarding security ownership of certain beneficial owners and management called for by this item may be found in our definitive Proxy Statement prepared in connection with the 2011 Annual Meeting of Shareholders and is incorporated herein by reference.

Equity Compensation Plan Information

The following table provides information about our shares of Common Stock that may be issued upon the exercise of options, warrants and rights under all of our existing equity compensation plans as of December 31, 2010.

 

Plan Category

   Number of securities to be
issued upon exercise of
outstanding options,
warrants and rights
    Weighted-average
exercise price of
outstanding options,
warrants and rights
     Number of securities remaining
available for future issuance  under
equity compensation plans
(excluding securities reflected in
column (a))
 
     (a)     (b)      (c)  

Equity compensation plans approved by security holders

     100,800      $ 18.88         68,036   

Equity compensation plans not approved by security holders

     0           0   
                   

Total

     100,800 (1)         68,036 (2) 
                   

 

(1) If the exercise of these outstanding options and issuance of additional common shares had occurred as of December 31, 2010, these shares would represent .70% of our then total outstanding shares.

 

32


Table of Contents
(2) As of December 31, 2010, there were 63,357 shares remaining available for issuance under the 2002 Long-Term Incentive Plan, and 4,679 shares remaining available under the Long-Term Incentive Plan, all of which could be issued under the terms of the plans upon the exercise of stock options or stock appreciation rights, or in the form of restricted stock or other stock awards.

Item 13. Certain Relationships and Related Transactions, and Director Independence

Information called for by this item may be found in our definitive Proxy Statement prepared in connection with the 2011 Annual Meeting of Shareholders and is incorporated herein by reference.

Item 14. Principal Accounting Fees and Services

Information called for by this item may be found in the our definitive Proxy Statement prepared in connection with the 2011 Annual Meeting of Shareholders and is incorporated herein by reference.

 

33


Table of Contents

PART IV

Item 15. Exhibits, Financial Statement Schedules

The following financial statements, schedules and exhibits are filed as part of this Report:

(i) Financial Statements

 

     Page  

Report of Independent Registered Public Accounting Firm

     F-1   

Consolidated Balance Sheets at December 31, 2010 and December 31, 2009

     F-2   

Consolidated Statements of Income for the Years Ended December 31, 2010, 2009, and 2008

     F-3   

Consolidated Statements of Changes in Shareholders’ Equity for the Years Ended December  31, 2010, 2009, and 2008

     F-4   

Consolidated Statements of Cash Flows for the Years Ended December 31, 2010, 2009 and 2008

     F-5   

Notes to Consolidated Financial Statements

     F-6   

(ii) Schedules

Other schedules have not been included because they are not required, not applicable, immaterial or the information required has been included elsewhere herein.

(iii) Exhibits

See Exhibit Index on page E-1. The Company will furnish to any eligible shareholder, upon written request, a copy of any exhibit listed upon payment of a reasonable fee equal to the Company’s expenses in furnishing such exhibit. Such requests should be addressed to Investor Relations, Gulf Island Fabrication, Inc., P.O. Box 310, Houma, LA 70361-0310.

 

34


Table of Contents

GLOSSARY OF CERTAIN TECHNICAL TERMS

 

blasting and coating facility:   Building and equipment used to clean steel products and prepare them for coating with marine paints and other coatings.
coping machine:   A computerized machine that cuts ends of tubular pipe sections to allow for changes in weld bevel angles and fits onto other tubular pipe sections.
deck:   The component of a platform on which development drilling, production, separating, gathering, piping, compression, well support, crew quartering and other functions related to offshore oil and gas development are conducted.
direct labor hours:   Hours worked by employees directly involved in the production of the Company’s products. These hours do not include contractor labor hours and support personnel hours such as maintenance, warehousing and drafting.
dry tree system:   A system in which a platform’s well control valves and apparatus (“christmas trees”) and risers are installed and operated above water.
fixed platform:   A platform consisting of a rigid jacket which rests on tubular steel pilings driven into the seabed and which supports a deck structure above the water surface.
floating production platform:   Floating structure that supports offshore oil and gas production equipment (MinDOC, TLP, FPSO, SPAR).
FPSO:   Floating Production Storage and Offloading vessel.
graving dock:   A box shaped basin made of steel sheet pile walls and concrete floor into which a vessel may be floated into or out of by pumping out or in water. The end will be closed by earthen berms and a sheet pile wall that will be removed to float out vessels.
grit blast system:   System of preparing steel for coating by using steel grit rather than sand as a blasting medium.
hydraulic plate shear:   Machine that cuts steel by a mechanical system similar to scissors.
inshore:   Inside coastlines, typically in bays, lakes and marshy areas.
ISO 9001-2008:   International Standards of Operations 9001-2008 - Defines quality management system of procedures and goals for certified companies.
jacket:   A component of a fixed platform consisting of a tubular steel, braced structure extending from the mudline of the seabed to a point above the water surface. The jacket is supported on tubular steel pilings driven into the seabed and supports the deck structure located above the level of storm waves.

 

G-1


Table of Contents
Min DOC:   Minimum Deepwater Operating Concept. Floating production platform designed for stability and dynamic response to waves consisting of three vertical columns arranged in a triangular shape connected to upper and lower pontoon sections.
modules:   Packaged equipment usually consisting of major production, utility or compression equipment with associated piping and control system.
offshore:   In unprotected waters outside coastlines.
piles:   Rigid tubular pipes that are driven into the seabed to support platforms.
plasma-arc cutting system:   Steel cutting system that uses an ionized gas cutting rather than oxy-fuel system.
platform:   A structure from which offshore oil and gas development drilling and production are conducted.
pressure vessel:   A metal container generally cylindrical or spheroid, capable of withstanding various internal pressure loadings.
skid unit:   Packaged equipment usually consisting of major production, utility or compression equipment with associated piping and control system.
SPAR:   A vessel with a circular cross-section that sits vertically in the water and is supported by buoyancy chambers (“hard tanks”) at the top and stabilized by a structure (“midsection”) hanging from the hard tanks.
specialized lifting device (SLD):   The specialized lifting device is a twin boom device with a below hook rating of 4,000 tons at a radius of 207 feet from the bulkhead. The 410 foot booms are 100 feet apart and provide a lifting height of 317 feet from the water.
spud barge:   Construction barge rigged with vertical tubular or square lengths of steel pipes that are lowered to anchor the vessel.
subsea templates:   Tubular frames which are placed on the seabed and anchored with piles. Usually a series of oil and gas wells are drilled through these underwater structures.
tension leg platform (TLP):   A platform consisting of a floating hull and deck anchored by vertical tensioned cables or pipes connected to pilings driven into the seabed. A tension leg platform is typically used in water depths exceeding 1,000 feet.

 

G-2


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Shareholders

Gulf Island Fabrication, Inc.

We have audited the accompanying consolidated balance sheets of Gulf Island Fabrication, Inc. as of December 31, 2010 and 2009, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2010. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Gulf Island Fabrication, Inc. at December 31, 2010 and 2009, and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2010, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Gulf Island Fabrication, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 28, 2011, expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

New Orleans, Louisiana

February 28, 2011

 

F-1


Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED BALANCE SHEETS

 

     December 31,  
     2010      2009  
     (in thousands)  
ASSETS      

Current assets:

     

Cash and cash equivalents

   $ 88,072       $ 8,751   

Contract receivables, net

     13,042         76,555   

Contract retainage

     11,000         875   

Costs and estimated earnings in excess of billings on uncompleted contracts

     6,513         17,973   

Prepaid expenses and other

     3,674         2,983   

Inventory

     4,265         4,224   

Deferred tax assets

     1,301         1,513   

Income tax receivable

     2,755         —     
                 

Total current assets

     130,622         112,874   

Property, plant and equipment, net

     197,652         200,459   

Long-term contracts receivable, net

     —           12,313   

Other receivables

     5,907         5,854   

Other assets

     675         675   
                 

Total assets

   $ 334,856       $ 332,175   
                 
LIABILITIES AND SHAREHOLDERS’ EQUITY      

Current liabilities:

     

Accounts payable

   $ 5,262       $ 16,518   

Billings in excess of costs and estimated earnings on uncompleted contracts

     7,215         8,935   

Accrued employee costs

     4,506         4,737   

Accrued expenses

     1,528         2,059   

Income taxes payable

     —           124   
                 

Total current liabilities

     18,511         32,373   

Deferred tax liabilities

     29,153         26,001   
                 

Total liabilities

     47,664         58,374   

Shareholders’ equity:

     

Preferred stock, no par value, 5,000,000 shares authorized, no shares issued and outstanding

     —           —     

Common stock, no par value, 20,000,000 shares authorized, 14,340,971 and 14,307,878 shares issued and outstanding at December 31, 2010 and December 31, 2009

     9,846         9,770   

Additional paid-in capital

     91,112         90,311   

Retained earnings

     186,234         173,720   
                 

Total shareholders’ equity

     287,192         273,801   
                 

Total liabilities and shareholders’ equity

   $ 334,856       $ 332,175   
                 

The accompanying notes are an integral part of these statements

 

F-2


Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF INCOME

(in thousands, except per share data)

 

     Years Ended December 31,  
     2010     2009     2008  

Revenue

   $ 248,286      $ 311,529      $ 420,507   

Cost of revenue

     225,015        272,064        368,211   
                        

Gross profit

     23,271        39,465        52,296   

General and administrative expenses

     7,947        8,257        9,451   
                        

Operating income

     15,324        31,208        42,845   

Other income (expense):

      

Interest expense

     (76     (77     (41

Interest income

     5,097        1,063        213   

Other, net

     1,014        (55     (97
                        
     6,035        931        75   
                        

Income before income taxes

     21,359        32,139        42,920   

Income taxes

     8,266        11,335        13,898   
                        

Net income

   $ 13,093      $ 20,804      $ 29,022   
                        

Earnings per share data:

      

Basic earnings per share—common shareholders

   $ 0.90      $ 1.44      $ 2.03   
                        

Diluted earnings per share—common shareholders

   $ 0.90      $ 1.44      $ 2.02   
                        

Cash dividend declared per common share

   $ 0.04      $ 0.13      $ 0.40   
                        

The accompanying notes are an integral part of these statements

 

F-3


Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS’ EQUITY

(in thousands, except share data)

 

     Common Stock     Additional
Paid-In
Capital
    Retained
Earnings
    Total
Shareholders
Equity
 
     Shares     Amount        

Balance at January 1, 2008

     14,214,736      $ 9,560      $ 87,853      $ 131,500      $ 228,913   

Exercise of stock options

     63,000        96        863        —          959   

Income tax benefit from exercise of stock options

     —          —          542        —          542   

Net income

     —          —          —          29,022        29,022   

Issuance of common stock restricted stock vesting

     17,560        —          —          —          —     

Cancellation of common stock restricted stock vesting

     (2,263     (3     (27     —          (30

Compensation expense restricted stock

     —          44        395        —          439   

Compensation expense non-qualified stock options

     —          10        87        —          97   

Dividends on common stock

     —          —          —          (5,735     (5,735
                                        

Balance at December 31, 2008

     14,293,033      $ 9,707      $ 89,713      $ 154,787      $ 254,207   

Exercise of stock options

     1,400        2        19        —          21   

Income tax benefit from exercise of stock options

     —          —          24        —          24   

Net income

     —          —          —          20,804        20,804   

Issuance of common stock restricted stock vesting

     16,240        —          —          —          —     

Cancellation of common stock restricted stock vesting

     (2,795     (6     (55     —          (61

Compensation expense restricted stock

     —          60        544        —          604   

Compensation expense non-qualified stock options

     —          7        66        —          73   

Dividends on common stock

     —          —          —          (1,871     (1,871
                                        

Balance at December 31, 2009

     14,307,878      $ 9,770      $ 90,311      $ 173,720      $ 273,801   

Exercise of stock options

     6,000        10        91        —          101   

Income tax benefit from exercise of stock options

     —          —          124        —          124   

Net income

     —          —          —          13,093        13,093   

Issuance of common stock restricted stock vesting

     33,790        —          —          —          —     

Cancellation of common stock restricted stock vesting

     (6,697     (17     (156     —          (173

Compensation expense restricted stock

     —          83        742        —          825   

Dividends on common stock

     —          —          —          (579     (579
                                        

Balance at December 31, 2010

     14,340,971      $ 9,846      $ 91,112      $ 186,234      $ 287,192   
                                        

The accompanying notes are an integral part of these statements

 

F-4


Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

 

     Years Ended December 31,  
     2010     2009     2008  

Operating activities:

      

Net income

   $ 13,093      $ 20,804      $ 29,022   

Depreciation

     19,282        18,512        17,489   

Amortization expense

     —          —          —     

Impairment expense

     —          —          —     

Deferred income taxes

     3,364        5,137        5,450   

Excess tax benefits from share-based payment arrangements

     (124     (24     (542

Compensation expense—stock compensation plans

     825        677        536   

Changes in operating assets and liabilities:

      

Contracts receivable, net

     75,826        8,146        (18,267

Contract retainage

     (10,125     (263     (182

Costs and estimated earnings in excess of billings on uncompleted contracts

     11,460        (7,834     3,516   

Prepaid expenses, inventory and other assets

     (732     1,142        1,854   

Other receivables

     (53     1,640        (7,494

Income tax receivable

     (2,631     —          —     

Accounts payable

     (11,256     (547     (1,015

Billings in excess of costs and estimated earnings on uncompleted contracts

     (1,720     (30,996     (335

Accrued employee costs

     (404     (1,284     (1,491

Accrued expenses

     (531     (2,370     2,010   

Income taxes payable

     (124     (1,752     (3,700
                        

Net cash provided by operating activities

   $ 96,150      $ 10,988      $ 26,851   

Cash flows from investing activities:

      

Capital expenditures, net

     (16,475     (15,250     (33,418

Proceeds from the sale of equipment

     —          1,000        —     
                        

Net cash used in investing activities

     (16,475     (14,250     (33,418

Cash flows from financing activities:

      

Proceeds from exercise of stock options

     101        21        959   

Excess tax benefit from share-based payment arrangements

     124        24        542   

Payments of dividends on common stock

     (579     (1,871     (5,735
                        

Net cash used in financing activities

     (354     (1,826     (4,234
                        

Net increase (decrease) in cash and cash equivalents

     79,321        (5,088     (10,801

Cash and cash equivalents at beginning of period

     8,751        13,839        24,640   
                        

Cash and cash equivalents at end of period

   $ 88,072      $ 8,751      $ 13,839   
                        

Supplemental cash flow information:

      

Interest paid

   $ 72      $ 71      $ 45   
                        

Income taxes paid, net of refunds

   $ 7,644      $ 7,893      $ 12,128   
                        

The accompanying notes are an integral part of these statements

 

F-5


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

DECEMBER 31, 2010

1. ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of Presentation

Gulf Island Fabrication, Inc., together with its subsidiaries (the “Company”), is a leading fabricator of offshore drilling and production platforms and other specialized structures used in the development and production of offshore oil and gas reserves. The Company’s corporate offices and three major subsidiaries are located in Houma, Louisiana, and another major subsidiary is located in San Patricio County, Texas. The Company’s principal markets are concentrated in the offshore regions and along the coast of the Gulf of Mexico. The consolidated financial statements include the accounts of Gulf Island Fabrication, Inc. and its majority owned subsidiaries. All significant intercompany balances and transactions have been eliminated in consolidation.

Structures and equipment fabricated by the Company include jackets and deck sections of fixed production platforms; hull, tendon, and/or deck sections of floating production platforms (such as TLPs, SPARs, FPSOs and MinDOCs); piles; wellhead protectors; subsea templates; various production, processing, compressor and utility modules; offshore living quarters; brown water towboats; barges; lift boats; offshore support vessels and mid-body sections for offshore supply vessels. The Company also provides services such as offshore interconnect pipe hook-up; inshore marine construction; manufacture and repair of pressure vessels; heavy lifts such as ship integration and TLP module integration; loading and offloading jack-up drilling rigs, semi-submersible drilling rigs, TLPs, SPARs or other similar cargo.; steel warehousing and sales; onshore and offshore scaffolding and piping insulation services.

Operating Cycle

The lengths of our contracts vary, but are typically longer than one year in duration. Consistent with industry practice, assets and liabilities have been classified as current under the operating cycle concept whereby all contract-related items are regarded as current regardless of whether cash will be received or paid within a twelve month period. Assets and liabilities classified as current which may not be paid or received within the next twelve months include contract retainage, costs and estimated earnings in excess of billings on uncompleted contracts, and billings in excess of costs and estimated earnings on uncompleted contracts. However, any variation from normal contract terms would cause classification of assets and liabilities as long-term. See Note 2 and 17 for further explanation.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent liabilities at the date of the financial statements and the reported amounts of revenue and expense during the reporting period. Areas requiring significant estimates by our management include contract revenues, costs and profits and the application of percentage-of-completion (POC) method of accounting. Actual results could differ from those estimates.

Cash Equivalents

The Company considers all highly liquid investments with maturities of three months or less when purchased to be cash equivalents.

 

F-6


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

Concentration of Credit Risk

The principal customers of the Company include major and large independent oil and gas companies and their contractors. This concentration of customers may impact the Company’s overall exposure to credit risk, either positively or negatively, in that customers may be similarly affected by changes in economic or other conditions. Receivables are generally not collateralized. In the normal course of business, the Company extends credit to its customers on a short-term basis. The Company routinely reviews its accounts receivable balances and makes provisions for probable doubtful accounts as it deems appropriate.

Stock-Based Compensation

Awards under the Company’s stock-based compensation plans are accounted for under a fair-value based measurement method.

Inventory

Inventory consists of materials and production supplies and is stated at the lower of cost or market determined on the first-in, first-out basis.

Accrued Employee Cost—Workers Compensation Liability

The Company and its subsidiaries Gulf Island, Gulf Island Marine and Dolphin Services are self-insured for workers’ compensation liability except for losses in excess of $300,000 per occurrence for Louisiana workers’ compensation and for U.S. longshoreman and harbor workers’ coverage. Gulf Marine has insurance coverage for Texas workers’ compensation with a $300,000 deductible. The liability for workers compensation is based on claims filed and estimates of claims incurred but not reported. Our workers compensation liability balance was $1.4 million and $800,000 as of December 31, 2010 and 2009, respectively.

Property, Plant and Equipment

Property, plant and equipment are stated at cost less accumulated depreciation. Depreciation is computed on the straight-line basis over the estimated useful lives of the assets, which range from 3 to 25 years. Ordinary maintenance and repairs, which do not extend the physical or economic lives of the plant or equipment, are charged to expense as incurred.

Long-Lived Assets

The Company records impairment losses on long-lived assets used in operations when events and circumstances indicate that the assets might be impaired and the undiscounted cash flows estimated to be generated by those assets are less than the carrying amounts of those assets. The impairment loss is determined by comparing the fair value of the assets to their carrying amounts and recording the excess of the carrying amounts of the assets over their fair value as an impairment charge. Fair value is determined based on discounted cash flows or appraised values, as appropriate.

Fair Value Measurements

The Company bases its fair value determinations of the carrying value of other financial assets and liabilities on an evaluation of their particular facts and circumstances and valuation techniques that require judgements and estimates. Valuation techniques used to measure fair value maximize the use of relevent observable inputs and

 

F-7


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

minimize the use of unobservable inputs. The fair value hierarchy gives the highest priority to observable inputs such as quoted prices in active markets for identical assets or liabilities (Level 1) and the lowest priority to unobservable inputs (Level 3). The level in the fair value hierarchy within which the fair value measurement falls is determined based on the lowest level input that is significant to the valuation technique. As of December 31, 2010, none of our assets or liabilities require fair value determination.

Revenue Recognition

The Company uses the percentage-of-completion accounting method for construction contracts. Revenue from fixed-price or unit rate contracts is recognized on the percentage-of-completion method, computed by the efforts-expended method which measures the percentage of labor hours incurred to date as compared to estimated total labor hours for each contract. This progress percentage is applied to estimated gross profit for each contract to determine gross profit earned to date. Revenue recognized in a period for a contract is the amount of gross profit earned for that period plus the costs incurred on the contract during the period.

Under a unit rate contract, material items or labor tasks are assigned unit rates of measure. The unit rates of measure will generally be an amount of dollars per ton, per foot, per square foot, per item installed, etc. A typical unit rate contract can contain hundreds to thousands of unit rates of measure that all accumulate to determine the total contract value. Profit margins are built into the unit rates.

Some contracts include a total or partial reimbursement to us of any costs associated with specific capital projects required by the fabrication process. If a particular capital project provides future benefits to us, the cost to build the capital project will be capitalized, and the revenue for the capital project will increase the estimated profit in the contract.

Contract costs include all direct material, labor and subcontract costs and those indirect costs related to contract performance, such as indirect labor, supplies and tools. Also included in contract costs are a portion of those indirect contract costs related to plant capacity, such as depreciation, insurance and repairs and maintenance. These indirect costs are allocated to jobs based on actual direct labor hours incurred. Profit incentives are included in revenue when their realization is probable. Claims for extra work or changes in scope of work are included in revenue when the amount can be reliably estimated and collection is probable. No revenues were recorded at December 31, 2010 related to unapproved change orders. We had $468,000 of change orders, approved as to scope but not price, recorded at December 31, 2009 that were approved in the first quarter of 2010. We had $6.9 million of change orders, related to re-measure issues primarily involving one customer, recorded at December 31, 2008. These issues were settled and resulted in the recognition of an additional $400,000 of revenue in the first quarter of 2009. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. We recognized contract losses of $1.3 million, $1.4 million, and $1.2 million in the years ended December 31, 2010, 2009, and 2008, respectively.

Income Taxes

Income taxes have been provided using the liability method. Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes using enacted rates expected to be in effect during the year in which the basis differences reverse.

Uncertain tax positions are recognized only when they are more likely than not to be sustained upon audit. Interest and penalties on uncertain tax positions are recorded in income tax expense. Our federal tax returns have been examined and settled through the 2007 tax year. There were no material uncertain tax positions to record for the years presented in these statements.

 

F-8


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

2. BLUEWATER AGREEMENT

On July 15, 2009, we reached an agreement with Bluewater Industries, Inc. (“Bluewater”) to restructure the payment terms for the remainder of the amounts owed, estimated to be $90 million, on the MinDOC I project. Bluewater, an engineering consulting firm, contracted with ATP to oversee the fabrication of the MinDOC I hull and topsides. The amount owed to us on the project at the time of the arrangement was $64.5 million. An additional $25.5 million was billed on the project under this arrangement through completion, which occurred in stages during the fourth quarter of 2009. Additional changes in the scope of the project in excess of the $90 million were approved by Bluewater and ATP through change orders. Change orders outside of the restructured payment agreement were fully paid as of December 31, 2010. There were $8.1 million of change orders outside of the restructured payment agreement reflected in contracts receivable as of December 31, 2009. Change orders were paid in cash and were not part of our restructured payment arrangement.

Bluewater agreed to pay $42 million of the amount owed in seven equal installments of $6 million each, with the first payment due September 5, 2009 and each subsequent payment due on the 5th day of each calendar month through March 5, 2010. We received the entire $42 million in payments from Bluewater.

Bluewater agreed to pay the remaining $48 million owed to us pursuant to the assignment of all of its right, title and interest in the Conveyance of Overriding Royalty Interest between Bluewater and ATP. The interest we received from Bluewater is a limited overriding royalty interest because the amount to be received by us was set not to exceed $48 million. Upon cumulative receipt of the $48 million, the limited overriding royalty would revert back to Bluewater. As of November 29, 2010, we received $3.4 million pursuant to our limited overriding royalty interest. On November 29, 2010, we sold the limited overriding royalty interest to an undisclosed buyer for an aggregate purchase price of $39.3 million, all of which has been paid to us by December 31, 2010. As a result of the sale, the assignment of the overriding royalty interest terminated, and the royalty interest has been transferred to the buyer.

We discounted the final estimated contract price on the MinDOC 1 project by $11.0 million, applying discount rates of 10% to the $42 million installment component and 18% to the $48 million royalty interest component, which resulted in a reduction in contract revenue related to the discount to be recognized as interest income in future periods. We recognized $4.6 million and $961,000 of the discount as interest income during the years ended December 31, 2010 and 2009, respectively.

There are no amounts due from Bluewater and ATP subject to our overriding royalty interest included in contract receivables at December 31, 2010. At December 31, 2009, $38.8 million of our contracts receivable were subject to the overriding royalty interest, net of the discount, of which $12.3 million was expected to be paid after one year.

 

F-9


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

3. CONTRACTS RECEIVABLE

Amounts due on contracts as of December 31 were as follows (in thousands):

 

     2010      2009  

Completed contracts

     

Current receivables

   $ 2,458       $ 45,667   

Long term receivables due after one year

     —           12,313   

Contracts in progress:

     

Current receivables

     10,632         30,942   

Retainage due within one year

     11,000         875   
                 
     24,090         89,797   

Less allowance for doubtful accounts

     48         54   
                 
   $ 24,042       $ 89,743   
                 

4. COSTS AND ESTIMATED EARNINGS ON UNCOMPLETED CONTRACTS

Information with respect to uncompleted contracts as of December 31 is as follows (in thousands):

 

     2010     2009  

Costs incurred on uncompleted contracts

   $ 164,095      $ 495,595   

Estimated profit earned to date

     27,644        62,818   
                
     191,739        558,413   

Less billings to date

     192,441        549,375   
                
   $ (702   $ 9,038   
                

The above amounts are included in the accompanying consolidated balance sheets at December 31 under the following captions (in thousands):

 

     2010     2009  

Costs and estimated earnings in excess of billings on uncompleted contracts

   $ 6,513      $ 17,973   

Billings in excess of costs and estimated earnings on uncompleted contracts

     (7,215     (8,935
                
   $ (702   $ 9,038   
                

 

F-10


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

5. PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment consisted of the following at December 31 (in thousands):

 

     Estimated
Useful Life
   2010      2009  
     (in Years)              

Land

   n/a    $ 9,227       $ 9,227   

Buildings

   25      55,272         53,243   

Machinery and equipment

   10 to 25      167,370         161,274   

Furniture and fixtures

   3 to 5      4,179         3,852   

Transportation equipment

   3 to 5      3,038         3,095   

Improvements

   15      77,016         75,994   

Construction in progress

   n/a      8,273         6,333   
                    
        324,375         313,018   

Less accumulated depreciation

        126,723         112,559   
                    
      $ 197,652       $ 200,459   
                    

The Company leases certain equipment used in the normal course of its operations under month-to-month lease agreements cancelable only by the Company. During 2010, 2009, and 2008, the Company expensed $2.7 million, $3.3 million, and $6.8 million, respectively, related to these leases. The Company’s equipment lease expense increased significantly in 2008 as a result of increased crane capacity requirements of its major projects.

6. OTHER RECEIVABLES

At December 31, 2010, we have recorded $5.9 million, net of advances received from our insurance provider, in “Other receivables” related to an insurance claim for costs that we have determined are recoverable under our various insurance policies. Certain costs that were deemed unrecoverable based on either our insurance coverage or our deductibles related to these insurance claims were expensed at the time incurred. The amounts of the deductibles associated with our various insurance policies are generally based on a percentage of the repair costs. Until all property is restored to pre-damaged condition, we will incur costs for repairs and record the deductibles accordingly. We have not recorded any gains related to this claim in our income statement and will not record any gains until the claim is settled.

The $5.9 million claim relates to costs incurred in connection with an accident that occurred in April 2008 at our Texas facility involving four cranes. This amount represents costs incurred by us to rent replacement cranes while our damaged cranes were repaired. In addition, we have one crane with a carrying value of approximately $2.9 million that is pending determination from the insurance carrier whether to repair or replace that crane. Our insurance provider has filed a declaratory judgment action in U.S. District Court, Eastern District of Louisiana seeking to deny insurance coverage of the costs of renting cranes to mitigate business-interruption damages that might otherwise have been incurred as a result of the accident. We are defending ourselves from the insurer’s request for a declaratory judgment that crane-rental coverage is limited to $450,000, when in fact we believe there is coverage for all amounts that have been, or will be, expended under the terms of the policy.

A hearing was held in January 2011 and we are awaiting a final ruling from that hearing with respect to our claim. We intend to continue to pursue this matter through these legal proceedings and although there can be no assurances made as to the ultimate outcome, we, in consultation with outside legal counsel, believe it is probable that all of our claim will ultimately be fully recoverable under our insurance policies. In January 2011, we deposited a $1.1 million check from our insurance provider toward the total loss of the damaged crane discussed above involved in the accident, without prejudice to our continuing to pursue full recovery.

 

F-11


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

During 2010, we settled claims in connection with the hurricanes that hit the Gulf Coast in 2008. We recorded other income of $1.1 million for the twelve-month period ended December 31, 2010 as a result of recovering amounts under our flood and property policies in excess of our damages and related costs.

7. INCOME TAXES

Significant components of the Company’s deferred tax assets and liabilities as of December 31 were as follows (in thousands):

 

     2010      2009  

Deferred tax liabilities:

     

Property, plant and equipment

   $ 29,153       $ 26,001   
                 
     29,153         26,001   

Deferred tax assets:

     

Employee benefits

     541         345   

Uncompleted contracts

     375         539   

Stock based compensation expense

     224         182   

State net operating loss

     —           263   

Other

     161         184   
                 

Total deferred tax assets:

     1,301         1,513   
                 

Net deferred tax liabilities:

   $ 27,852       $ 24,488   
                 

Significant components of income tax expense for the years ended December 31 were as follows (in thousands):

 

     2010      2009      2008  

Current:

        

Federal

   $ 4,496       $ 5,864       $ 8,278   

State

     406         334         170   
                          

Total current

     4,902         6,198         8,448   

Deferred:

        

Federal

     3,085         4,860         5,340   

State

     279         277         110   
                          

Total deferred

     3,364         5,137         5,450   
                          

Income taxes

   $ 8,266       $ 11,335       $ 13,898   
                          

 

F-12


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

A reconciliation of income taxes computed at the U.S. federal statutory tax rate to the Company’s income tax expense for the years ended December 31 is as follows (in thousands):

 

     2010     %     2009     %     2008     %  

U.S. statutory rate

   $ 7,476        35.0   $ 11,249        35.0   $ 15,022        35.0

Increase (decrease) resulting from:

            

State income taxes

     893        4.2        397        1.2        280        0.7   

Qualified Production Activities

            

Income—Deduction

     (205     (1.0     (269     (0.8     (561     (1.3

Federal Work Opportunity Tax Credit

     —          —          (117     (0.4     (741     (1.7

Other

     102        0.5        75        0.3        (102     (0.3
                                                

Income tax expense

   $ 8,266        38.7   $ 11,335        35.3   $ 13,898        32.4
                                                

8. LINE OF CREDIT

Effective July 15, 2010, we entered into the Ninth Amendment to the Ninth Amended and Restated Credit Agreement (the “Revolver”) which, among other things, extended the term of the $60 million Revolver from December 31, 2011 to December 31, 2012. The Revolver is secured by some of our real estate, machinery and equipment, and fixtures. Amounts borrowed under the Revolver bear interest, at our option, at the prime lending rate established by JPMorgan Chase Bank, N.A. or LIBOR plus 1.5%. We pay a fee on a quarterly basis of one-fourth of one percent per annum on the weighted-average unused portion of the Revolver.

At December 31, 2010, no amounts were borrowed under the Revolver, but we had letters of credit outstanding totaling $9.7 million. As of February 28, 2011, $8.2 million of these letters of credit outstanding expired, which increased the unused portion of the Revolver to $58.5 million. We are required to maintain certain covenants, including balance sheet and cash flow ratios. As of December 31, 2010, the Company was in compliance with these covenants.

9. CONTINGENT LIABILITIES

The Company is subject to various routine legal proceedings in the normal conduct of its business, primarily involving commercial claims, workers’ compensation claims, and claims for personal injury under general maritime laws of the United States and the Jones Act. While the outcome of these lawsuits, legal proceedings and claims cannot be predicted with certainty, management believes that the outcome of any such proceedings, even if determined adversely, would not have a material adverse effect on the financial position, results of operations or cash flows of the Company.

In December 2004, we received notice from Louisiana Department of Environmental Quality (“LDEQ”) that the Corrective Action Plan submitted in October 2004 was not acceptable. The Corrective Action Plan was developed to provide remediation to several isolated areas located on property we sold in 2001. In mid 2005, the LDEQ approved a sampling plan with the proposed sampling to begin in September of 2005. Due to the hurricanes that struck the Louisiana coast in 2005, the scheduled sampling was cancelled. In October 2006, the sampling was completed. This sampling plan was rejected by the LDEQ in April 2008. We submitted a revised sampling plan to the LDEQ in September 2008 and it was later approved with stipulations. After sampling, we filed a report with the LDEQ in mid July 2010 and now await the agency’s review. We have recorded $450,000 of estimated cost to remediate the site which includes professional fees such as engineering and consulting costs. We have expended $117,000 of this accrual and $333,000 remains accrued at December 31, 2010 which represents costs to remediate the site once approval is received from the agency.

 

F-13


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

10. SALES TO MAJOR CUSTOMERS

The Company’s customer base is primarily concentrated in the oil and gas industry. Through the Company’s marine fabrication subsidiary, its customer base is expanding into other industries that utilize marine vessels. The Company is not dependent on any one customer, and the revenue earned from each customer varies from year to year based on the contracts awarded. Sales to customers comprising 10% or more of the Company’s total revenue for the years ended December 31 are summarized as follows (in thousands):

 

     2010      2009      2008  

Eni US Operating Co. Inc.

   $ 38,497       $ 36,677       $ —     

American Electric Power Service Corporation

     27,858         —           —     

Versabuild, LLC

     27,407         —           —     

Bluewater Industries, Inc.

     —           112,011         154,127   

Daewoo Shipbuilding and Marine Engineering, Ltd.

     —           —           72,355   

11. INTERNATIONAL SALES

The Company’s fabricated structures are used worldwide by U.S. customers operating abroad and by foreign customers. Sales of fabricated structures for delivery outside of the United States accounted for 3%, 1%, and 20% of the Company’s revenues for the years ended December 31, 2010, 2009 and 2008, respectively.

 

     December 31,  
     2010      2009      2008  
     (In millions)  

Location:

        

United States

   $ 240.9       $ 309.5       $ 337.5   

International

     7.4         2.0         83.0   
                          

Total

   $ 248.3       $ 311.5       $ 420.5   
                          

12. CONTRACT COSTS

Pass-through costs are material and sub-contract costs associated with projects that are included as revenue of a project, but add little or no margin to the project. Pass-through costs, as a percentage of revenue, for the year ended December 31, 2010, were 36.1% compared to 36.6% and 41.2% for the years ended December 31, 2009 and 2008, respectively.

13. RETIREMENT PLAN

The Company has a defined contribution plan (the “Retirement Plan”) for all employees that are qualified under Section 401(k) of the Internal Revenue Code. Gulf Island Resources employees are not eligible for the Retirement Plan. Contributions to the Retirement Plan by the Company are based on the participants’ contributions, with an additional year-end discretionary contribution determined by the Board of Directors. For the years ended December 31, 2010, 2009, and 2008, the Company contributed a total of $2.1 million, $2.3 million, and $2.9 million, respectively.

 

F-14


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

14. QUARTERLY OPERATING RESULTS (UNAUDITED)

A summary of quarterly results of operations for the years ended December 31, 2010 and 2009 were as follows (in thousands, except per share data):

 

     March 31,
2010
     June 30,
2010
     September 30,
2010
     December 31,
2010
 

Revenue

   $ 69,259       $ 75,290       $ 60,733       $ 43,004   

Gross profit

     7,438         6,735         6,935         2,163   

Net Income

     4,505         3,432         3,462         1,694   

Basic EPS

     0.31         0.24         0.24         0.12   

Diluted EPS

     0.31         0.24         0.24         0.12   

 

     March 31,
2009
     June 30,
2009
     September 30,
2009
     December 31,
2009
 

Revenue

   $ 84,999       $ 79,133       $ 76,631       $ 70,766   

Gross profit

     11,759         8,338         11,218         8,150   

Net Income

     6,200         4,013         5,986         4,605   

Basic EPS

     0.43         0.28         0.41         0.32   

Diluted EPS

     0.43         0.28         0.41         0.32   

As presented above, revenue was $43.0 million as compared to $70.8 million for the three month periods ended December 31, 2010 and 2009, respectively. Contributing to the decrease, man-hours worked were 443,000 hours during the three-month period ended December 31, 2010, compared to 697,000 for the comparable period ended December 31, 2009. The most significant impact of the reduction in man-hours worked was related to our Texas facility which is a direct result of the reduction in new job awards for deepwater projects. Since 2006, the majority of the work performed at our Texas facility was on larger deepwater projects. During fiscal 2010, the fabrication awards for the facility were limited to large diameter tanks, multi-size modules and a 10,000 ton lifting system, the majority of which sailed by October 2010. The MinDOC hull was the last large deepwater project fabricated in our Texas facility (sailing in November 2009) until we were awarded a contract for the fabrication and integration of the topsides on a deepwater Gulf of Mexico project we received and announced on November 23, 2010. This project will contribute to revenue significantly over the next two years.

Also presented above, gross profit was $2.2 million (5% of revenue) as compared to $8.2 million (11.5% of revenue) for the three-month periods ended December 31, 2010 and 2009, respectively. The reduction in work volume at our Texas facility contributed to the decrease.

 

F-15


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

15. EARNINGS PER SHARE

The following table sets forth the computation of basic and diluted earnings per share (in thousands, except per share data):

 

     2010      2009      2008  

Basic:

        

Numerator:

        

Net Income

   $ 13,093       $ 20,804       $ 29,022   

Less: Net income attributable to participating securities (unvested restricted stock)

     160         238         110   
                          

Net income attributable to common shareholders

   $ 12,933       $ 20,566       $ 28,912   
                          

Denominator:

        

Denominator for basic earnings per share-weighted-average shares

     14,318         14,294         14,258   
                          

Basic earnings per share—common shareholders

   $ 0.90       $ 1.44       $ 2.03   
                          

Diluted:

        

Numerator:

        
        

Net income

   $ 13,093       $ 20,804       $ 29,022   

Less: Net income attributable to participating securities (unvested restricted stock)

     154         220         110   
                          

Net income attributable to common shareholders

   $ 12,939       $ 20,584       $ 28,912   
                          

Denominator:

        
        

Denominator for basic earnings per share-weighted-average shares

     14,318         14,294         14,258   

Effect of dilutive securities:

        

Employee stock options

     11         1         34   
                          

Denominator for dilutive earnings per share-weighted-average shares

     14,329         14,295         14,292   
                          

Diluted earnings per share—common shareholders

   $ 0.90       $ 1.44       $ 2.02   
                          

 

F-16


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

16. LONG-TERM INCENTIVE PLANS

On February 13, 1997, the shareholders approved the adoption of the Long-Term Incentive Plan (the “Plan”). The Plan authorizes the grant of options to purchase an aggregate of 1,000,000 (split adjusted) shares of the Company’s common stock to certain officers and key employees of the Company chosen by a committee appointed by the board of directors (the “compensation committee”) to administer such Plan. Under the Plan, all options granted have 10-year terms, and the conditions relating to the vesting and exercise of the options result in their being classified as “nonstatutory options” (options which do not afford income tax benefits to recipients, but the exercise of which may provide tax deductions for the Company). Each option will have an exercise price per share not less than the fair market value of a share of common stock on the date of grant and no individual employee may be granted options to purchase more than an aggregate of 400,000 shares of common stock.

On April 24, 2002, the shareholders approved the adoption of the 2002 Long-Term Incentive Plan, which was amended by the shareholders on April 26, 2006 (the “2002 Plan”). The 2002 Plan authorizes the grant of awards, including options, to purchase an aggregate of 500,000 shares of the Company’s common stock to certain officers, key employees, directors and consultants of the Company chosen by the compensation committee. Under the 2002 Plan, all options granted have 10-year terms, and the conditions relating to the vesting and exercise of the options result in their being classified as nonstatutory options. Each option will have an exercise price per share not less than the fair market value of a share of common stock on the date of grant and no individual employee may be granted options to purchase more than an aggregate of 200,000 shares of common stock.

At December 31, 2010, there were approximately 68,000 shares remaining available for future issuance under the Plan and the 2002 Plan (together, the “Incentive Plans”). The Company issues new shares through its transfer agent upon stock option exercises or restricted share issuances. During 2010, 2009 and 2008, the compensation committee did not grant any stock options under the Incentive Plans.

A summary of the Company’s stock option activity as of December 31, 2010, and changes during the year then ended is presented below:

 

     Options     Weighted-
Average
Exercise
Price
     Weighted-
Average
Remaining
Contractual
Term
     Aggregate
Intrinsic
Value
($000)
 

Outstanding at January 1, 2010

     106,800      $ 18.77         

Granted

     —          —           

Exercised

     (6,000     16.83         

Forfeited or expired

     —          —           
                      

Outstanding at December 31, 2010

     100,800      $ 18.88         3.2       $ 256   
                                  

Vested at December 31, 2010

     100,800      $ 18.88         3.2       $ 256   
                                  

Exercisable at December 31, 2010

     100,800      $ 18.88         3.2       $ 256   
                                  

The total intrinsic value of options exercised during the years ended December 31, 2010, 2009, and 2008, was $58,000, $11,000, and $1.6 million, respectively.

As of December 31, 2010, all compensation cost related to options granted under the Incentive Plans was recognized. All options granted under the Incentive Plans were vested as of December 31, 2009.

 

F-17


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

Under the Incentive Plans, the compensation committee may award shares of restricted stock to such eligible participants as the Committee determines pursuant to the terms of the Incentive Plans. An award of restricted stock shall be subject to such restrictions on transfer and forfeitability provisions and such other terms and conditions subject to the provisions of the Incentive Plans. At the time an award of restricted stock is made, the compensation committee shall establish a period of time during which the transfer of the shares of restricted stock shall be restricted and after which the shares of restricted stock shall be vested (the “Restricted Period”). Except for the shares of restricted stock that vest based on the attainment of performance goals, the Restricted Period shall be a minimum of three years, with incremental vesting of portions of the award over the three-year period permitted. If the vesting of the shares of restricted stock is based upon the attainment of performance goals, a minimum Restricted Period of one year is allowed, with incremental vesting of portions of the award over the one-year period permitted.

The Incentive Plans do not have any limitations on the amount of shares that can be specifically awarded as restricted stock. Restricted stock granted during 2010 vests in annual 20% increments beginning on the first anniversary of the date of the grant. The fair value of restricted stock is determined based on the closing price of the Company’s common stock on the date of the grant. On December 1, 2010 the compensation committee granted 52,100 shares of restricted stock to key employees under the Incentive Plans. The weighted-average grant-date fair value of stock granted during 2010 was $27.09. The compensation committee granted 136,700 shares of restricted stock in 2009 with a weighted-average grant date fair value of $16.66. The compensation committee did not grant any restricted stock during 2008. A summary of the status of our restricted stock awards is presented in the table below.

 

     Number of
Shares
    Weighted-
Average
Grant-Date
Fair Value
Per Share
 

Restricted shares at January 1, 2010

     168,150      $ 20.22   

Granted

     52,100        27.09   

Vested

     (27,093     24.38   

Forfeited

     (13,897     23.02   
                

Restricted shares at December 31, 2010

     179,260      $ 21.37   
                

As of December 31, 2010, there was $2.7 million of total unrecognized compensation cost related to restricted share-based compensation arrangements granted under the Incentive Plans. That cost is expected to be recognized over a weighted-average period of 3.3 years. The total fair value of shares vested during the year ended December 31, 2010 was $716,000.

Share-based compensation cost that has been charged against income for the Incentive Plans was $825,000, $677,000 and $536,000 for 2010, 2009 and 2008, respectively. The total income tax benefit recognized in the income statement for share-based compensation arrangements was $316,000, $239,000 and $176,000 for 2010, 2009 and 2008, respectively.

Cash received from option exercises for the years ended December 31, 2010, 2009 and 2008 was $101,000, $21,000, and $959,000, respectively. The excess tax benefit realized for the tax deductions from option exercise of the share-based payment arrangements totaled $124,000, $24,000 and $542,000, respectively, for the years ended December 31, 2010, 2009 and 2008.

 

F-18


Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

 

17. SUBSEQUENT EVENTS

On January 14, 2011, we entered into an agreement with one of our customers regarding the collection of an $11.0 million retainage balance accumulated on a completed contract to receive $12.5 million, payable in twenty equal monthly installments, with the first payment due on June 30, 2011. The implied interest rate under the terms of the agreement is 9.5%.

On February 24, 2011, our Board of Directors declared a dividend of $0.06 per share on the shares of our common stock outstanding, payable March 28, 2011 to shareholders of record on March 14, 2011.

 

F-19


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on February 28, 2011.

 

GULF ISLAND FABRICATION, INC.

(Registrant)

By:  

/S/    KERRY J. CHAUVIN        

  Kerry J. Chauvin
 

Chairman of the Board and

Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on February 28, 2011.

 

Signature

  

Title

/S/    KERRY J. CHAUVIN        

Kerry J. Chauvin

  

Chairman of the Board and Chief Executive Officer (Principal Executive Officer)

/S/    ROBIN A. SEIBERT        

Robin A. Seibert

  

Vice President—Finance, Chief Financial Officer and Treasurer (Principal Financial and Accounting Officer)

/S/    GREGORY J. COTTER        

Gregory J. Cotter

  

Director

/S/    MICHAEL A. FLICK        

Michael A. Flick

  

Director

/S/    CHRISTOPHER M. HARDING        

Christopher M. Harding

  

Director

/S/    ALDEN J. LABORDE        

Alden J. Laborde

  

Director

/S/    JOHN P. LABORDE        

John P. Laborde

  

Director

/S/    KEN C. TAMBLYN        

Ken C. Tamblyn

  

Director

/S/    JOHN A. WISHART        

John A. Wishart

  

Director

 

S-1


Table of Contents

GULF ISLAND FABRICATION, INC.

EXHIBIT INDEX

 

EXHIBIT

NUMBER

    
2.1    Asset Purchase and Sales Agreement by and among the Company, New Vision, L.P., Gulf Marine Fabricators, and Technip Coflexip USA Holdings, Inc. dated December 20, 2005, incorporated by reference to Exhibit 2.1 to the Company’s Form 8-K filed December 22, 2005. ^
3.1    Compose Articles of Incorporation of the Company incorporated by reference to Exhibit 3.1 of the Company’s Form 10-Q filed April 23, 2009.
3.2    Bylaws of the Company as Amended and Restated through February 28, 2008, incorporated by reference to Exhibit 3.2 of the Company’s Form 8-K filed March 4, 2008.
4.1    Specimen Common Stock Certificate. *
4.2    Rights Agreement by and between the Company and American Stock Transfer & Trust Company, LLC, as rights agent, dated March 25, 2009, incorporated by reference to Exhibit 4.1 to the Company’s Form 8-K filed March 26, 2009.
10.1      Form of Indemnity Agreement by and between the Company and each of its directors and executive officers. * †
10.2      Registration Rights Agreement between the Company and Alden J. Laborde. *
10.3      The Company’s Long-Term Incentive Plan. * †
10.4      Form of Stock Option Agreement under the Company’s Long-Term Incentive Plan, as amended, incorporated by reference to Exhibit 10.6 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1997. † ^
10.5      The Company’s 2002 Long-Term Incentive Plan, as amended and restated, incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the period ended June 30, 2006 . † ^
10.6      Form of Stock Option Agreement under the Company’s 2002 Long-Term Incentive Plan, incorporated by reference to Exhibit 10.7 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2002. † ^
10.7      Form of Restricted Stock Agreement under the Company’s 2002 Long-Term Incentive Plan, incorporated by reference to Exhibit 10.8 to the Company’s Annual Report or Form 10-K for the year ended December 31, 2005. † ^
10.8      Form of Reimbursement Agreement. * †
10.9      Ninth Amended and Restated Credit Agreement among the Company, Bank One, N.A. and Whitney National Bank, dated as of December 31, 2003, incorporated by reference to Exhibit 10.9 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2003. ^
10.10    First Amendment to Ninth Amended and Restated Credit Agreement among the Company and Bank One, N.A. and Whitney National Bank dated as of June 30, 2004 incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the period ended June 30, 2004. ^
10.11    Second Amendment to Ninth Amended and Restated Credit Agreement among the Company and JP Morgan Chase Bank, N.A. and Whitney National Bank dated as of December 21, 2004, incorporated by reference to Exhibit 10.12 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2004. ^

 

E-1


Table of Contents

EXHIBIT

NUMBER

    
10.12    Third Amendment to Ninth Amended and Restated Credit Agreement among the Company and JP Morgan Chase Bank, N.A. and Whitney National Bank dated June 30, 2005, incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the period ended June 30, 2005. ^
10.13    Fourth Amendment to Ninth Amended and Restated Credit Agreement among the Company and JP Morgan Chase Bank, N.A. and Whitney National Bank dated January 30, 2006, incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K filed February 3, 2006. ^
10.14    Fifth Amendment to the Ninth Amended and Restated Credit Agreement among the Company, JP Morgan Chase Bank N.A. and Whitney National Bank dated March 31, 2006, incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the period ended June 30, 2006. ^
10.15    Sixth Amendment to the Ninth Amended and Restated Credit Agreement among the Company and JP Morgan Chase Bank, N.A. and Whitney National Bank dated as of February 19, 2007, incorporated by reference to Exhibit 10.19 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2006. ^
10.16    Seventh Amendment to the Ninth Amended and Restated Credit Agreement among the Company and JP Morgan Chase Bank, N.A. and Whitney National Bank dated as of August 6, 2008, incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K filed August 11, 2008.
10.17    Eighth Amendment to the Ninth Amended and Restated Credit Agreement among the Company and JPMorgan Chase Bank, N.A. and Whitney National Bank dated as of June 2, 2009, incorporated by reference to Exhibit 10.1 of the Company’s Form 8-K filed June 3, 2009.
10.18    Ninth Amendment to the Ninth Amended and Restated Credit Agreement dated July 15, 2010 incorporated by reference to Exhibit 10.1 of the Company’s Form 8-K filed July 16, 2010.
10.19    Change of Control Agreement between the Company and Kerry J. Chauvin dated January 1, 2011, incorporated by reference to Exhibit 99.1 of the Company’s Form 8-K filed January 3, 2011. †
10.20    Change of Control Agreement between the Company and Kirk J. Meche dated January 1, 2011, incorporated by reference to Exhibit 99.2 of the Company’s Form 8-K filed January 3, 2011. †
10.21    Change of Control Agreement between the Company and Robin A. Seibert dated January 1, 2011, incorporated by reference to Exhibit 99.3 of the Company’s Form 8-K filed January 3, 2011. †
21.1      Subsidiaries of the Company – The Company’s significant subsidiaries, Gulf Island, L.L.C., Gulf Island Marine Fabricators, L.L.C., and Dolphin Services, L.L.C. (organized under Louisiana law) and Gulf Marine Fabricators, L.P. (a Texas limited partnership) are wholly owned and are included in the Company’s consolidated financial statements.
23.1      Consent of Ernst & Young LLP.
31.1      CEO Certifications pursuant to Rule 13a-14 under the Securities Exchange Act of 1934.
31.2      CFO Certifications pursuant to Rule 13a-14 under the Securities Exchange Act of 1934.
32         Section 906 Certifications furnished pursuant to 18 U.S.C. Section 1350.

 

Management Contract or Compensatory Plan.
* Incorporated by reference to the Company’s Registration Statement on Form S-1 filed with the Commission on February 14, 1997 (Registration Number 333-21863).
^ SEC File Number 000-22303.

 

E-2