GULF ISLAND FABRICATION INC - Quarter Report: 2014 September (Form 10-Q)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

For the quarterly period ended September 30, 2014

OR

For the transition period from                      to                     

Commission File Number 001-34279

GULF ISLAND FABRICATION, INC.

(Exact name of registrant as specified in its charter)

(713) 714-6100

(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes    x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes    x    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes    ¨  No    x

The number of shares of the registrant’s common stock, no par value per share, outstanding as of October 28, 2014 was 14,511,978.

Table of Contents

- 2 -

Table of Contents

PART I. FINANCIAL INFORMATION

Item 1. Financial Statements.

GULF ISLAND FABRICATION, INC.

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these financial statements.

- 3 -

Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF INCOME (UNAUDITED)

(in thousands, except per share data)

The accompanying notes are an integral part of these financial statements.

- 4 -

Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENT OF CHANGES IN SHAREHOLDERS’ EQUITY (UNAUDITED)

The accompanying notes are an integral part of these financial statements.

- 5 -

Table of Contents

GULF ISLAND FABRICATION, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS (UNAUDITED)

The accompanying notes are an integral part of these financial statements.

- 6 -

Table of Contents

GULF ISLAND FABRICATION, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

FOR THE THREE-MONTH AND NINE-MONTH

PERIODS ENDED SEPTEMBER 30, 2014 AND 2013

NOTE 1 – ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Gulf Island Fabrication, Inc., together with its subsidiaries (the “Company”, “we” or “our”), is a leading fabricator of offshore drilling and production platforms and other specialized structures. The Company’s principal corporate office is located in Houston, Texas and its fabrication facilities are located in Houma, Louisiana and San Patricio County, Texas. The Company’s principal markets are concentrated in the offshore regions and along the coast of the Gulf of Mexico. The consolidated financial statements include the accounts of Gulf Island Fabrication, Inc. and its subsidiaries. All significant intercompany balances and transactions have been eliminated in consolidation.

Gulf Island Fabrication, Inc. serves as a holding company and conducts all of its operations through its subsidiaries, which include Gulf Island, L.L.C. and Gulf Marine Fabricators, L.P., both of which perform fabrication of offshore drilling and production platforms and other specialized structures used in the development and production of oil and gas reserves, Gulf Island Marine Fabricators, L.L.C., which performs marine fabrication and construction services, Dolphin Services, L.L.C., which performs offshore and onshore fabrication and construction services, Dolphin Steel Sales, L.L.C., which sells steel plate and other steel products and Gulf Island Resources, L.L.C., which hires laborers with similar rates and terms as those provided by contract labor service companies.

Structures and equipment fabricated by us include: jackets and deck sections of fixed production platforms; hull, tendon, and/or deck sections of floating production platforms (such as “TLPs”, “SPARs”, “FPSOs” and “MinDOCs”); piles; wellhead protectors; subsea templates; various production, compressor and utility modules; offshore living quarters; towboats, offshore support vessels, dry docks, liftboats, tanks and barges. The Company also provides offshore interconnect pipe hook-up, inshore marine construction, manufacture and repair of pressure vessels, heavy lifts such as ship integration and TLP module integration, loading and offloading of jack-up drilling rigs, semi-submersible drilling rigs, TLPs, SPARs or other similar cargo, onshore and offshore scaffolding, piping insulation services, and steel warehousing and sales. For definitions of certain technical terms contained in this Form 10-Q, see the Glossary of Certain Technical Terms contained in our Annual Report on Form 10-K for the year ended December 31, 2013.

The accompanying unaudited consolidated financial statements have been prepared in accordance with U.S. generally accepted accounting principles (“GAAP”) for interim financial information, the instructions to Form 10-Q, and Article 10 of Regulation S-X. Accordingly, the consolidated financial statements do not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting of normal recurring adjustments) considered necessary for a fair presentation have been included. Operating results for the three and nine-month periods ended September 30, 2014 are not necessarily indicative of the results that may be expected for the year ended December 31, 2014.

- 7 -

Table of Contents

The balance sheet at December 31, 2013 has been derived from the audited financial statements at that date but does not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete financial statements.

For further information, refer to the consolidated financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2013.

NOTE 2 – CONTRACTS RECEIVABLE AND RETAINAGE

The principal customers of the Company include major and large independent oil and gas companies, marine companies, and their contractors. Of our contracts receivable balance at September 30, 2014, $57.6 million, or 70.0%, is with three customers. The significant projects for these three customers consist of a large deepwater hull and topside for one customer, two separate projects with fabrication and installation of offshore skids for a second customer, and jackets, piles, and topsides for a deepwater Gulf of Mexico project for a third customer.

At September 30, 2014, the Company’s contracts receivable balance included an allowance for bad debt in the amount of $0.2 million. The Company collected $0.6 million during the fourth quarter 2014 related to a previously reserved contract receivable for a vessel upgrade and outfitting project.

NOTE 3 – ASSETS HELD FOR SALE

Assets held for sale consist of a partially constructed topside, related valves, piling and equipment that we acquired from a customer following its default under a contract for a deepwater project in 2012. Assets held for sale are required to be measured at the lower of their carrying amount or fair value less cost to sell. Management determined fair value of these assets with the assistance of third party valuation specialists, assuming the sale of the underlying assets individually or in the aggregate to a willing market participant, including normal ownership risks assumed by the purchaser, and the sale of certain components at scrap value. We estimated fair value relying primarily on the cost approach and applied the market approach where comparable sales transaction information was readily available. The cost approach is based on current replacement or reproduction costs of the subject assets less depreciation attributable to physical, functional, and economic factors. The market approach involves gathering data on sales and offerings of similar assets in order to value the subject assets. This approach also includes an assumption for the measurement of the loss in value from physical, functional, and economic factors. The fair value of assets held for sale represent Level 3 fair value measurements (as defined by GAAP), based primarily on the limited availability of market pricing information for either identical or similar items. As of September 30, 2014, management estimates that the fair value of these assets held for sale was $13.5 million.

During the first quarter, 2014, we entered into an agreement with the manufacturer of certain equipment, representing approximately 50% of the fair value of assets held for sale, whereby the manufacturer agreed to assist with restoration and marketing efforts, in return for a percentage of the sale proceeds.

To date, we have not sold, licensed, or leased any of the equipment subject to the security agreement; however, we continue to actively market the equipment, and believe that the fair value of the assets is recoverable through the eventual disposition of project deliverables and the enforcement of our security interest in their equipment. However, the ultimate amount we are able to recover for these assets is dependent upon various factors such as our ability to enforce our security interest over all of the deliverables and equipment, as well as market interest in the project deliverables and equipment, which may change in the future. The timing of any sales we are able to consummate and the price we are able to obtain may result in a revision to the recorded fair value amount of any remaining assets held for sale.

- 8 -

Table of Contents

Management has engaged three consultants to assist with the marketing efforts for the assets held for sale as well as providing assistance to secure potential FLNG (“Floating Liquefied Natural Gas”) opportunities.

NOTE 4 – LINE OF CREDIT

The Company has a credit agreement with Whitney Bank and JPMorgan Chase Bank, N.A. that provides the Company with an $80 million revolving credit facility (the “Credit Facility”). The Credit Facility also allows the Company to use up to the full amount of the available borrowing base for letters of credit. On October 23, 2014, we entered into an amendment to our credit facility to extend the maturity date from December 31, 2014 to December 31, 2015.

The Credit Facility is secured by substantially all of our assets other than real property located in the state of Louisiana. Amounts borrowed under the Credit Facility bear interest, at our option, at either the prime lending rate established by JPMorgan Chase Bank, N.A. or LIBOR plus 1.5 percent. We pay a fee on a quarterly basis of one-fourth of one percent per annum on the weighted-average unused portion of the Credit Facility.

At September 30, 2014, no amounts were outstanding under the Credit Facility, and we had outstanding letters of credit totaling $59.2 million, reducing the unused portion of our credit facility to $20.8 million. We are required to maintain certain financial covenants, including a minimum current ratio of 1.25 to 1, a net worth minimum requirement of $254.1 million, debt to net worth ratio of 0.5 to 1, and earnings before interest, taxes, depreciation and amortization (EBITDA) to interest expense ratio of 4.0 to 1. As of September 30, 2014, we were in compliance with all covenants.

NOTE 5 – CONTRACT COSTS

We define pass-through costs as material, freight, equipment rental, and sub-contractor services included in the direct costs of revenue associated with projects.

The Company uses the percentage-of-completion accounting method for fabrication contracts. Revenue from fixed-price or unit rate contracts is recognized on the percentage-of-completion method, computed by the efforts-expended method which measures the percentage of labor hours incurred to date as compared to estimated total labor hours to complete each contract. This progress percentage is applied to our estimate of total anticipated gross profit for each contract to determine gross profit earned to date. Revenue recognized in a period for a contract is the amount of gross profit recognized for that period plus pass-through costs incurred on the contract during the period. Consequently, pass-through costs are included in revenue but have no impact on the gross profit recognized on a project for that particular period.

Pass-through costs as a percentage of revenue were 42.6% and 59.4% for the three-month periods ended September 30, 2014 and 2013, respectively. Pass-through costs as a percentage of revenue were 47.8% and 57.1% for the nine-month periods ended September 30, 2014 and 2013, respectively.

Costs and estimated earnings in excess of billings on uncompleted contracts include unbilled costs of $9.3 million relating to three major customers. Billings in excess of costs and estimated earnings include advances of $14.2 million from three major customers.

The Company recorded losses of $0.3 million and $5.1 million for the three-month and nine-month periods ended September 30, 2014, respectively, for certain marine projects.

- 9 -

Table of Contents

During the quarter ended September 30, 2014, we recorded revenue totaling $0.3 million related to certain change orders on one project which has been approved as to scope but not price. We expect to resolve this change order in the fourth quarter of 2014. At September 30, 2013, we recorded revenue totaling $3.9 million related to certain change orders on two projects that were approved as to scope but not price, all of which were subsequently approved in the normal course of business.

NOTE 6 – EARNINGS PER SHARE

The following table sets forth the computation of basic and diluted earnings per share (in thousands, except per share data):

NOTE 7 – SUBSEQUENT EVENTS

On October 23, 2014, our Board of Directors declared a dividend of $0.10 per share on the shares of our common stock outstanding, payable November 24, 2014 to shareholders of record on November 10, 2014.

- 10 -

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Forward-Looking Statements

Statements under “Backlog,” “Results of Operations” and “Liquidity and Capital Resources” and other statements in this report and the exhibits hereto that are not statements of historical fact are forward-looking statements. These statements are subject to certain risks and uncertainties that could cause actual results and outcomes to differ materially from the results and outcomes predicted in such forward-looking statements. Investors are cautioned not to place undue reliance upon such forward-looking statements. Important factors that may cause our actual results to differ materially from expectations or projections include those described in Item 1A. Risk Factors included in our Annual Report on Form 10-K for the year ended December 31, 2013.

Critical Accounting Policies and Estimates

Our consolidated financial statements are prepared in accordance with U.S. generally accepted accounting principles, which require us to make estimates and assumptions (see Note 1 to the consolidated financial statements included in our Annual Report on Form 10-K for the year ended December 31, 2013). We believe that our accounting policy on revenue recognition involves a high degree of judgment and complexity. Critical accounting policies are discussed more fully in our Annual Report on Form 10-K for the year ended December 31, 2013. There have been no changes in our evaluation of our critical accounting policies since December 31, 2013.

Backlog

Our backlog is based on management’s estimate of the direct labor hours required to complete, and the remaining revenue to be recognized with respect to those projects for which a customer has authorized us to begin work or purchase materials pursuant to written contracts, letters of intent or other forms of authorization. As engineering and design plans are finalized or changes to existing plans are made, management’s estimate of the direct labor hours required to complete a project and the price of a project at completion is likely to change.

All projects currently included in our backlog are generally subject to suspension, termination, or a reduction in scope at the option of the customer, although the customer is ordinarily required to pay us for work performed and materials purchased through the date of termination, suspension, or reduction in scope. In addition, customers have the ability to delay the execution of projects.

As of September 30, 2014, we had a revenue backlog of $252.9 million and a labor backlog of approximately 2.0 million man-hours remaining to work, including commitments received through October 20, 2014, compared to a revenue backlog of $223.8 million and a labor backlog of 2.1 million man-hours reported as of June 30, 2014.

- 11 -

Table of Contents

Of our backlog at September 30, 2014,

Projects for our three largest customers consist of a jacket, piles, and topsides for a deepwater Gulf of Mexico project for one customer, which commenced in the second quarter of 2013, shallow water jackets for a second customer, which will commence in the first quarter of 2015; and two projects for the fabrication and installation of offshore skids for one customer, one of which commenced in the second quarter of 2013 with the second project expected to commence during the first quarter 2015. The deepwater project is scheduled to be completed during the third quarter of 2015; the shallow water jackets are expected to be completed during the fourth quarter of 2015; and the fabrication and installation of the offshore skids are scheduled to be completed in the fourth quarter of 2014 and the end of 2015, respectively.

As of September 30, 2014, we expect to recognize revenue from our backlog of approximately

The timing of our recognition of the revenue backlog as presented above is based on management’s estimates of the application of the direct labor hours to complete the projects in our backlog. Certain factors and circumstances could cause changes in timing of the recognition of revenue from our backlog as well as the ultimate amounts recorded. For example, depending on the size of the project, the termination, postponement, or reduction in scope of any one project could significantly reduce our backlog, and could have a material adverse effect on revenue, net income and cash flow.

Based on the activity of the major oil and gas companies and certain engineering companies, we expect bids for deepwater projects to be available in the second half of 2015. Bidding activity for non-traditional Gulf of Mexico (“GOM”) marine related projects, GOM shallow water projects, and ancillary work associated with deepwater structures is expected to remain stable or increase somewhat in the fourth quarter of 2014 and throughout the first half of 2015. In addition, we expect to see increased activity for marine repair work in the fourth quarter of 2014 and throughout 2015.

- 12 -

Table of Contents

Workforce

As of September 30, 2014, we had approximately 1,730 employees and approximately 150 contract employees, compared to approximately 1,900 employees and approximately 200 contract employees as of June 30, 2014.

Man-hours worked were 898,000 during the three-month period ended September 30, 2014, compared to 978,000 for the three-month period ended June 30, 2014. The decrease in man-hours worked for the three-month period ended September 30, 2014 was primarily attributable to increased activities related to the completion of a large deepwater hull and deck, and marine barges in the prior quarter.

Results of Operations

Our revenue for the three-month periods ended September 30, 2014 and 2013 was $118.0 million and $168.2 million, respectively, representing a decrease of 29.8%. Our revenue for the nine-month periods ended September 30, 2014 and 2013 was $381.9 million and $473.2 million, respectively, representing a decrease of 19.3%.

The decrease in revenue for the three and nine-month periods ended September 30, 2014 is primarily attributable to substantial revenue for a large deepwater project and higher levels of revenue from pass-through costs recognized during the three and nine months ended September 30, 2013. Pass-through costs as a percentage of revenue were 42.6% and 59.4% for the three-month periods ended September 30, 2014 and 2013, respectively. Pass-through costs as a percentage of revenue were 47.8% and 57.1%, for the nine-month periods ended September 30, 2014 and 2013, respectively. Pass-through costs decreased primarily due to lesser amounts of subcontractor services and direct materials incurred on our large deepwater projects during the three and nine-month periods ended September 30, 2014 and 2103, respectively. Pass-through costs, as described in Note 5 in the Notes to Consolidated Financial Statements, are included in revenue, but have no impact on the gross profit recognized on a project for a particular period.

For the three-month periods ended September 30, 2014 and 2013, gross profit was $14.7 million (12.4% of revenue) and $9.1 million (5.4% of revenue), respectively. The increase in gross profit was primarily due to a higher level of offshore commissioning and hook-up activity performed on a time and material basis and a return to traditional jacket and smaller topside shallow water projects during the three-months ended September 30, 2014, compared to the three months ended September 30, 2013. Both the offshore services work and execution of the 2014 shallow water projects garnered higher profit margins as compared to our mix of projects performed during the three-months ended September 30, 2013.

For the nine-month periods ended September 30, 2014 and 2013, gross profit was $33.7 million (8.8% of revenue) and $25.4 million (5.4% of revenue), respectively.

- 13 -

Table of Contents

The increase in gross profit was primarily due to a loss of $11.4 million recognized during the first nine-months of 2013 related to a contract with a large deepwater customer compared a $5.1 million loss recognized on certain marine projects during the nine-months ended September 30, 2014. Additionally, the Company experienced a higher level of offshore commissioning and hook-up activity performed on a time and material basis and a return to traditional jacket and smaller topside shallow water projects during the nine-months ended September 30, 2014 compared to the nine months ended September 30, 2013. Both the offshore services work and execution of the 2014 shallow water projects garnered higher profit margins as compared to our mix of projects performed during the nine-months ended September 30, 2013.

While we attempt to include competitive profit margins into all of the project bids, the increasing scope and complexity of deepwater projects of our customers may result in events or circumstances specific to a particular deepwater project that could result in decreased gross margins as compared to our other fabrication projects. We experienced this during the first nine-months of 2013 with respect to a major deepwater project. To more effectively manage larger deepwater projects, we entered into a cooperative agreement with Bectel Oil, Gas & Chemicals, Inc. in July 2014 to jointly pursue deepwater project opportunities. We believe our fabrication experience, infrastructure and skilled labor force, coupled with Bectel’s engineering and project management expertise, will enable us to offer enhanced capabilities and expertise to our deepwater customers, while at the same time enhance our ability to manage the costs and complexities associated with these projects.

General and administrative expenses were $3.3 million and $10.6 million for the three and nine-month periods ended September 30, 2014, respectively, compared to $3.7 million and $9.0 million for the three and nine-month periods ended September 30, 2013, respectively. As a percentage of revenue, general and administrative expenses for the three and nine-month periods ended September 30, 2014 were 2.8% compared to 2.2% and 1.9% for the three and nine-month periods ended September 30, 2013, respectively. The decrease in general and administrative expenses for the three-month period ended September 30, 2014 is primarily attributable to the reduction in the allowance for doubtful accounts related to the settlement of an outstanding dispute with a foreign vessel operator. Factors that contributed to the increase in general and administrative expenses for the nine-month period ended September 30, 2014 include:

The Company had net interest expense of $22,000 and $66,000 for the three and nine-month periods ended September 30, 2014, respectively, compared to net interest expense of $41,000 and $164,000 for the three and nine-month periods ended September 30, 2013, respectively. The decrease in net interest expense for the three and nine-month periods ended September 30, 2014 was primarily driven by a reduction in interest expense as a result of decreased borrowings on our line of credit during the first nine months of 2014.

- 14 -

Table of Contents

The Company had $2,000 of other expenses for the three-month period ended September 30, 2014, compared to $15,000 for the three-month period ended September 30, 2013. The Company had other expenses for the nine-month period ended September 30, 2014 of $98,000, compared to other expense of $58,000 for the nine-month period ended September 30, 2013. Other expenses for the three-month and nine-month periods ended September 30, 2014 primarily represents losses on sales of property, plant, and equipment.

Our effective income tax rate for the three and nine-month periods ended September 30, 2014 was 33%, compared to an effective tax rate of 36% for the comparable periods of 2013. The decrease in the effective tax rate is due to an increase in our estimated Federal qualified production activities income deduction and a decrease in Louisiana state income tax apportionment.

Liquidity and Capital Resources

Historically, we have funded our business activities through cash generated from operations. The Company has a credit agreement with Whitney Bank and JPMorgan Chase Bank, N.A. that provides the Company with an $80 million revolving credit facility (the “Credit Facility”). The Credit Facility also allows the Company to use up to the full amount of the available borrowing base for letters of credit. On October 23, 2014, we entered into an amendment to our Credit Facility to extend the maturity date from December 31, 2014 to December 31, 2015. The Credit Facility is secured by substantially all of our assets, other than real property located in the state of Louisiana. Amounts borrowed under the Credit Facility bear interest, at our option, at either the prime lending rate established by JPMorgan Chase Bank, N.A. or LIBOR plus 1.5 percent. We pay a fee on a quarterly basis of one-fourth of one percent per annum on the weighted-average unused portion of the Credit Facility.

At October 28, 2014, no amounts were borrowed under the Credit Facility, and we had outstanding letters of credit totaling $59.2 million, reducing the unused portion of the Credit Facility to $20.8 million. We are required to maintain certain financial covenants, including a minimum current ratio of 1.25 to 1 a minimum net worth requirement of $254.1 million, debt to net worth ratio of 0.5 to 1, and earnings before interest, taxes, depreciation and amortization (EBITDA) to interest expense ratio of 4.0 to 1. As of September 30, 2014, we were in compliance with all covenants.

At September 30, 2014, our contracts receivable balance was $82.3 million of which we have subsequently collected $36.2 million through October 21, 2014.

At September 30, 2014, our cash and cash equivalents totaled $26.7 million, compared to $36.6 million at December 31, 2013. Working capital was $93.1 million and our ratio of current assets to current liabilities was 2.39 to 1 at September 30, 2014. Our primary use of cash during the period was related to capital expenditures including the purchase of two cranes for our Texas facility and costs associated with fabrication projects.

- 15 -

Table of Contents

In connection with work associated with a completed hull and topside project for a large deepwater customer in the first quarter 2014, we had a receivable balance of $15.3 million at September 30, 2014. We expect to collect the remaining balance in the fourth quarter of 2014 in the normal course of business.

For the nine-month period ended September 30, 2014 net cash provided by operating activities was $20.3 million, compared to $13.8 million at September 30, 2013. The increase in cash provided by operations for the nine-month period ended September 30, 2014, compared to the nine-month period ended September 30, 2013, was primarily due to lower costs associated with fabrication projects and higher operating margins during the first nine-months of 2014.

Net cash used in investing activities for the nine-month period ended September 30, 2014 was $25.8 million, compared to $12.5 million for the nine-month period ended September 30, 2013. Investing activities for 2014 were primarily related to capital expenditures for equipment, including the purchase of two cranes for our Texas facility.

We anticipate capital expenditures for the remainder of 2014 to be approximately $2.7 million. Included in anticipated expenditures for the next quarter is the purchase of equipment and additional yard and facility infrastructure improvements, including $1.0 million of maintenance capital expenditures at our Texas and Louisiana facilities, $0.7 million for yard improvements and $0.4 million remaining for a plate roller at our Texas facility.

Net cash used in financing activities for the nine-months ended September 30, 2014 and 2013 was $4.4 million related to payments of dividends.

We believe our cash and cash equivalents generated by operating activities, realization of working capital relating to fabrication projects, and funds available under the revolver will be sufficient to fund our capital expenditures and meet our working capital needs for the next twelve months. However, job awards may require us to issue additional letters of credit further reducing the capacity available on our revolving line of credit. As of September 30, 2014, we had outstanding letters of credit totaling $59.2 million, reducing the unused portion of our credit facility to $20.8 million.

Contractual Obligations

There have been no material changes from the information included in our Annual Report on Form 10-K for the year ended December 31, 2013. For more information on our contractual obligations, refer to Part II, Item 7 of our Annual Report on Form 10-K for the year ended December 31, 2013.

Off-Balance Sheet Arrangements

There have been no material changes from the information included in our Annual Report on Form 10-K for the year ended December 31, 2013.

- 16 -

Table of Contents

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

There has been no material changes in the Company’s market risks during the quarter ended September 30, 2014. For more information on market risk, refer to Part II, Item 7A. of our Annual Report on Form 10-K for the year ended December 31, 2013.

Item 4. Controls and Procedures.

The Company maintains disclosure controls and procedures that are designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the SEC rules and forms, and that such information is communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. The Company’s management, with the participation of the Company’s Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this report. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that the design and operation of our disclosure controls and procedures were effective as of the end of the period covered by this report.

There have been no changes during the fiscal quarter ended September 30, 2014 in the Company’s internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

- 17 -

Table of Contents

PART II. OTHER INFORMATION

Item 1. Legal Proceedings.

The Company is subject to various routine legal proceedings in the normal conduct of its business primarily involving commercial claims, workers’ compensation claims, and claims for personal injury under general maritime laws of the United States and the Jones Act. While the outcome of these lawsuits, legal proceedings and claims cannot be predicted with certainty, management believes that the outcome of any such proceedings, even if determined adversely, would not have a material adverse effect on the financial position, results of operations or cash flows of the Company.

Item 1A. Risk Factors.

There have been no material changes from the information included in Part I, Item 1A of the Company’s Annual Report on Form 10-K for the year ended December 31, 2013.

Item 6. Exhibits.

- 18 -

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

Date: October 28, 2014

- 19 -

Table of Contents

GULF ISLAND FABRICATION, INC.

EXHIBIT INDEX

E-1