Hyperfine, Inc. - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number: 001-39949

Hyperfine, Inc.

(Exact name of registrant as specified in its charter)

351 New Whitfield Street

Guilford, Connecticut 06437

(Address of principal executive offices) (Zip Code)

Registrant’s telephone number, including area code: (203) 458-7100

Securities registered pursuant to Section 12(b) of the Exchange Act:

Securities registered pursuant to Section 12(g) of the Exchange Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the registrant’s voting and non-voting common equity held by non-affiliates of the registrant (without admitting that any person whose shares are not included in such calculation is an affiliate) computed by reference to the price at which the common equity was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter was approximately $203.9 million.

As of March 1, 2022, the registrant had 55,277,061 shares of Class A common stock outstanding and 15,055,288 shares of Class B common stock outstanding.

TABLE OF CONTENTS

2

EXPLANATORY NOTE

On December 22, 2021, HealthCor Catalio Acquisition Corp., a blank check company incorporated as a Cayman Islands exempted company with limited liability (“HealthCor” and after the Business Combination described herein, the “Company”), after domesticating as a Delaware corporation on December 21, 2021, consummated the previously announced business combination (the “Business Combination”) pursuant to the terms of the Business Combination Agreement, dated as of July 7, 2021 (the “Business Combination Agreement”), by and among HealthCor, Optimus Merger Sub I, Inc., a Delaware corporation and wholly owned subsidiary of HealthCor (“Merger Sub I”), Optimus Merger Sub II, Inc., a Delaware corporation and wholly owned subsidiary of HealthCor (“Merger Sub II”), Hyperfine, Inc., a Delaware corporation (“Legacy Hyperfine”), and Liminal Sciences, Inc., a Delaware corporation (“Liminal”). On December 22, 2021, immediately upon the consummation of the Business Combination, and such completion, the “Closing”), Merger Sub I merged with and into Legacy Hyperfine (the “Hyperfine Merger”), with Hyperfine surviving the Hyperfine Merger as a wholly owned subsidiary of HealthCor, and Merger Sub II merged with and into Liminal (the “Liminal Merger”), with Liminal surviving the Liminal Merger as a wholly owned subsidiary of HealthCor. In connection with the Business Combination, HealthCor changed its name to “Hyperfine, Inc.,” Legacy Hyperfine changed its name to “Hyperfine Operations, Inc.” and Liminal changed its name to “Liminal Operations, Inc.” and subsequently to "Liminal Sciences, Inc." Following the Closing, the Company’s Class A common stock is listed on the Nasdaq Global Market under the symbol “HYPR”. Unless the context requires otherwise, references in this report to the “Company,” “we,” “us,” and “our” refer to Hyperfine, Inc. and its wholly-owned subsidiaries, including Legacy Hyperfine and Liminal, as the case may be.

3

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”) and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), that relate to future events or our future financial performance regarding, among other things, the plans, strategies and prospects, both business and financial, of the Company. These statements are based on the beliefs and assumptions of our management team. Although we believe that our plans, intentions and expectations reflected in or suggested by these forward-looking statements are reasonable, we cannot assure you that we will achieve or realize these plans, intentions or expectations. Forward-looking statements are inherently subject to risks, uncertainties and assumptions. Generally, statements that are not historical facts, including statements concerning possible or assumed future actions, business strategies, events or results of operations, are forward-looking statements. These statements may be preceded by, followed by or include the words “believes,” “estimates,” “expects,” “projects,” “forecasts,” “may,” “will,” “should,” “seeks,” “plans,” “scheduled,” “anticipates” or “intends” or similar expressions. Forward-looking statements contained in this Annual Report on Form 10-K include, but are not limited to, statements about:

4

These and other factors that could cause actual results to differ from those implied by the forward-looking statements in this Annual Report on Form 10-K are more fully described in Item 1A under the heading “Risk Factors.” The risks described under the heading “Risk Factors” are not exhaustive. Other sections of this Annual Report on Form 10-K, such as the description of our Business set forth in Item 1 and our Management’s Discussion and Analysis of Financial Condition and Results of Operations set forth in Item 7 describe additional factors that could adversely affect our business, financial condition or results of operations. New risk factors emerge from time to time, and it is not possible to predict all such risk factors, nor can we assess the impact of all such risk factors on our business or the extent to which any factor or combination of factors may cause actual results to differ materially from those contained in any forward-looking statements. Forward-looking statements are not guarantees of performance. You should not put undue reliance on these statements, which speak only as of the date hereof. All forward-looking statements attributable to the Company or persons acting on the Company’s behalf are expressly qualified in their entirety by the foregoing cautionary statements. We undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

5

SUMMARY OF RISK FACTORS

Our business is subject to numerous risks and uncertainties that you should consider before investing in our securities. Some of the principal risk factors are summarized below:

6

These and other material risks we face are described more fully in Item 1A, Risk Factors, which investors should carefully review prior to making an investment decision with respect to the Company or its securities.

7

PART I

All brand names or trademarks appearing in this report are the property of their respective holders. Use or display by us of other parties’ trademarks, trade dress, or products in this report is not intended to, and does not, imply a relationship with, or endorsements or sponsorship of, us by the trademark or trade dress owners. Unless the context requires otherwise, references in this report to the “Company,” “we,” “us,” and “our” refer to Hyperfine, Inc and its wholly-owned subsidiaries, including Legacy Hyperfine and Liminal, as the case may be.

Item 1. BUSINESS

Overview

Prior to December 22, 2021, we were a blank check company incorporated as a Cayman Islands exempted company organized for the purpose of effecting a merger, share exchange, asset acquisition, share purchase, reorganization or similar business combination with one or more businesses. On December 21, 2021, we changed our jurisdiction of incorporation from the Cayman Islands to the State of Delaware by deregistering as an exempted company in the Cayman Islands and continuing and domesticating as a corporation, incorporated under the laws of the State of Delaware. On December 22, 2021, we completed the Business Combination pursuant to the Business Combination Agreement dated July 7, 2021 that we entered into with Legacy Hyperfine and Liminal. Upon the completion of the Business Combination, we changed our name to “Hyperfine, Inc.” and the business of Legacy Hyperfine and Liminal became our business.

We are an innovative digital health business with a mission to provide affordable and accessible imaging and monitoring and through magnetic resonance imaging (“MRI”) to revolutionize healthcare for people around the world. Our Swoop® Portable Magnetic Resonance (“MR”) Imaging SystemTM (“Swoop scanner”) produces high-quality images at a lower magnetic field strength than conventional MRI systems, and can be used by healthcare professionals to make effective clinical diagnoses on a patient in a variety of settings where MRI devices have previously been inaccessible. The easy-to-use interface and portable design of our Swoop scanner make it accessible for use anywhere in a hospital, clinic or patient care site. We are working to realize our vision of providing affordable and accessible imaging of health conditions around the world.

MRI is a medical imaging technique used in radiology to image the anatomy and the physiological processes of the human body. It is typically used in a variety of clinical settings for medical diagnosis, staging of disease and follow-up treatment. Unlike X-ray computed tomography (“CT”) or positron emission tomography (“PET”), MRI does not expose patients to harmful ionizing radiation. We believe MRI offers the most sensitive and objective measures of brain tissue and injury. Despite its advantages, many healthcare institutions throughout the world lack the facilities, qualified operators and capital necessary to acquire and maintain expensive MRI devices. For healthcare institutions that do have conventional MRI systems, disadvantages of conventional MRI systems include their high cost, facility requirements for a specialized MRI suite, and the scheduling delays, personnel resources and risk of adverse events that result from the need to transport critically ill patients to the MRI suite. The Swoop scanner is intended for use at the patient’s bedside in any hospital room or clinical setting, such as a physician’s office or a local urgent care facility. The demand for MRI has been augmented by the aging population and rising prevalence of cancer and cardiovascular, neurologic and orthopedic conditions. Healthcare professionals and insurers are recognizing imaging as a cost-effective and non-invasive diagnostic tool for evaluation and ongoing monitoring. Swoop is a next generation of these devices designed to drive costs down and expand the current $15.9 billion imaging market.

We believe the adoption of the Swoop scanner by healthcare professionals has benefits across healthcare communities both in the high and low resource settings. Through our collaborations with the healthcare community, we have begun to optimize our software ecosystem to harness Artificial Intelligence (“AI”) to transform the system into a true bedside clinical decision support platform. These efforts seek to improve image quality, help users analyze images, and reduce time to diagnosis. Our technology allows us to provide decision support and rapid feedback for diagnostic insight for clinicians of various levels of expertise. In the future, we hope to develop an ecosystem of products, expanding the capabilities of our core MRI product platform while introducing a brain sensing platform, subject to regulatory authorization, to offer a more complete solution and increase access to lifesaving technology across the care continuum.

Legacy Hyperfine received 510(k) clearance from the U.S. Food and Drug Administration (“FDA”) in 2020 for its Swoop Portable MR Imaging System™ for producing images that display the internal structure of the head where full diagnostic examination is not clinically practical, in order to provide imaging information to trained physicians that may be useful in determining a diagnosis. The system is commercially available in the United States. In 2021, we also obtained a Medical Device License issued by Health Canada and expanded into the Canadian market. In addition, we are seeking necessary regulatory authorizations in other major markets, including the United Kingdom, Australia and other countries. We recently received regulatory authorization in New Zealand and Pakistan. We are building our direct commercial infrastructure in the

8

United States and also have plans to sell our products in other countries either through direct sales or through distributors. Furthermore, we possess a portfolio of 141 issued patents worldwide as well as 293 patents pending as of February 15, 2022.

Legacy Hyperfine and Liminal were founded in 2014 and 2018, respectively, by Dr. Jonathan Rothberg, a serial entrepreneur who received the Presidential Medal of Technology & Innovation in 2016 for inventing a novel next generation DNA sequencing method and has founded more than 10 healthcare and technology companies, including 454 Life Sciences, Ion Torrent, CuraGen, Butterfly Network and Quantum-Si. Legacy Hyperfine has raised over $160 million in equity investments and partnership milestones from leading institutional investors, including GV (formerly Google Ventures), and grants, including the Bill & Melinda Gates Foundation (the "BMGF").

Liminal was founded as a wholly-owned subsidiary of 4Bionics LLC ("4Bionics"). 4Bionics was an early startup incubator founded in 2018 and controlled by the Rothberg family, and was designed for the funding and development needs of seed stage companies. When Liminal was founded, Legacy Hyperfine was focused on developing its own products. As Liminal was developing its platform for non-invasive monitoring and sensing of key brain health vitals, Legacy Hyperfine was beginning to commercialize the Swoop scanner and expanded its vision to include intervention and sensing to cover the care continuum. We believe that the synergies between Legacy Hyperfine’s MRI platform and Liminal’s brain sensing technology provide Hyperfine with the potential to connect the care continuum from MRI imaging to sensing, and could ultimately provide patients with affordable care and healthcare practitioners with a single source access to brain scanning and monitoring.

Our Competitive Strengths

We believe that our competitive strengths include the following:

We believe the Swoop scanner can expand the existing $15.9 billion global imaging market (expected to grow at a 5.2% CAGR from 2021 to 2028) by making MRI available to a larger set of patients in both developed and emerging markets, as well as increase the utilization of conventional MRIs through decreased wait times and facilitation of patient flow. Our primary focus is to expand the availability of MRI globally and across the care continuum, particularly to patients who are in intensive care units and in the emergency department, where timeliness is critical and an MRI scan can be essential for diagnosis and urgent intervention. The Swoop scanner can be wheeled directly to a patient’s bedside and offers a prompt solution for those patients who require an MRI scan but are too critically ill to be transported for a conventional MRI scan, and who may otherwise be forced to forego a scan or wait until their condition stabilizes.

We have also initiated a global research program supported by grant funding from the BMGF to assess the clinical feasibility of our Swoop scanner in providing immediate point-of-care brain imaging to infants between the ages of 0-24 months in low-medium income countries. We were awarded a $1.6 million grant from the BMGF for the provision and equipping of 20 sites with our portable point-of-care MRI system to enable the performance of a multi-site study focused on optimizing diagnostic image quality (the “Project”). During the third quarter of 2021, we were awarded an additional $3.3 million grant, of which $2.5 million was received from the BMGF in September 2021,with the remainder expected to be received by April 2022. Both of these grants are designed to support the deployment of a total of 25 Swoop devices and other services to investigators, which commenced in the spring of 2021, and is expected to fund the program for approximately two years. The ongoing investigation is designed to provide data to validate the use of our Swoop system in measuring the impact of maternal anemia, malnutrition, infection and birth related injury.

9

The Swoop scanner is designed to create value for stakeholders across the care continuum:

Our solution has the potential to improve the diagnosis and lives of the approximately 15 million annual new stroke sufferers worldwide. The Swoop scanner does not emit ionizing radiation and therefore does not have the increased risk of cancer that comes with CT imaging. This is particularly important for conditions that require regular follow-up with multiple scans per year, such as hydrocephalus. In certain circumstances, such as in the management of patients with delirium or altered mental status, familiarity, or keeping the surrounding environment as similar as possible, can be critical, which we believe makes bedside scanners like our Swoop scanner particularly useful since patients do not need to be moved to often distant radiology suites for conventional MRI scans. Studies show that 37% of patients report anxiety-related reactions when moved to an isolated room for imaging. With our system, we can offer a quieter, calmer experience with the option of a family member or other caregiver to be present by the patient’s bedside during the scanning process.

Our point of care scanner also helps avoid the risk of patient injury during transport through the ability to bring the scanner to the patient. By performing scans for urgent and critically ill patients at the bedside, we can help prevent the adverse incidents that occur to approximately 33% of critically ill patient cases during transport. The Swoop scanner also obviates the labor-intensive and high-risk process of transporting patients on ventilators or who are connected to other life-sustaining devices.

For healthcare professionals who are already facing demanding time constraints, dealing with lengthy and sometimes confusing MRI protocols adds to their time spent on logistics rather than caring for patients. Additionally, conventional MRIs require specially trained technicians who are fully dedicated to operate those systems and increase the time and

10

cost related to nurses and porters transporting patients to the MRI unit. Our Swoop scanner is designed to simplify the image acquisition process. We have designed our scanner to be user-friendly and require minimal training to be operated. Our platform can be controlled by a tablet, smartphone or any other WiFi capable device. The Swoop scanner’s portability and accessibility at the bedside can further allow more time for healthcare professionals to focus on other important activities related to patient care, diagnosis and treatment.

As healthcare costs continue to rise, we believe our Swoop scanner will allow for significant potential cost reductions that can benefit the entire imaging ecosystem. Our Swoop scanner has dramatically reduced hardware costs through design trade-off and compensation with the use of modern computational power and deep learning advances. The cost benefits of our Swoop scanner are not limited to a customer’s initial purchase of the scanner, as our customers continue to benefit by not having to spend on additional cooling, power and maintenance expenses throughout the lifetime of conventional MRI. Unlike conventional MRI systems, use of the Swoop scanner also does not require a specialized radio frequency (RF) room to safely house the MRI scanner, allowing space to be used for other important patient care activities. The use of the Swoop scanner in the ICU can also increase utilization by allowing critically ill patients to receive immediate access to an MRI instead of increasing congestion in the schedule of the conventional MRI systems due to complications in the patients’ condition and unexpected changes in their condition or treatment.

Our Strategies

Our strategies include the following:

In our plans for international commercial expansion, the countries in which we plan initially to commercialize our Swoop scanner include the United Kingdom, Australia, New Zealand and Pakistan. Through grant funding from the BMGF, we are deploying Swoop scanners in these target areas for research and clinical settings. The utilization of our Swoop scanners as part of the programs will allow us to begin building relationship across key stakeholders in these

11

countries or regions to better understand and meet required regulatory hurdles in anticipation of filing for regulatory authorization and ultimately expand into clinical use with patients. In addition, we are considering commercial expansion into several of the larger European Union ("EU") countries following our initial international commercial expansion. We believe these countries have the market size, regulatory environment, commercial access, and mature healthcare systems necessary, subject to regulatory authorization, for a successful launch of our Swoop scanner.

Our commitment to the vision of providing affordable and accessible imaging that enables earlier detection and remote management of health conditions around the world is in part made possible by grant funding from the BMGF. Through our engagement with nonprofit organizations, we aim to deploy the Swoop scanner to low-middle resource settings without readily-accessible MRI technology. The grants provided by the BMGF are designed to support the deployment of 25 Swoop scanners to investigators, which commenced in the spring of 2021, and are expected to fund the program for two years. The ongoing investigation is designed to provide data to validate the potential use of our Swoop scanner in measuring the impact of maternal anemia, malnutrition, infection and birth related injury.

The Swoop scanner has been used for diagnoses across various neurological pathologies, and we believe that the Swoop scanner could ultimately enable a new paradigm in the standard of care for these diseases that could be lifesaving. We believe early diagnosis of these diseases has cost saving benefits for multiple stakeholders including patients, providers and payors, as it can lead to earlier intervention of treatment and fewer patient visits.

Examples of use cases for our Swoop scanner include:

Our customer success program is designed to ensure that our customers achieve their desired outcomes while using our Swoop scanner. Our team seeks to foster long-term relationships, highlight key product benefits and manage expectations with our customers. The program is designed to guide customers to achieve maximum utilization of the

12

product and enhance their experience through ongoing educational tools and opportunities. Our customer success team aims to ensure a smooth path to obtain customer loyalty and continue to grow our install base with subscription renewals, follow-up sales, and new Swoop scanner placements.

Brain Sensing Platform

In addition to our efforts to disrupt the MRI market, we see a significant opportunity to help patients in the neuromonitoring space. Current methods to monitor the brain directly include drilling a hole through the skull to insert sensors. This method introduces risk to the patient and is highly impractical outside of specialized hospitals, which severely limits access to critical information about a patient’s neurological health. We intend to develop non-invasive brain sensing technology that is more affordable, accessible, and safer, to enable healthcare professionals to more easily monitor key brain vital signs such as cerebral blood flow and intracranial pressure throughout patient care. We expect this new form of neural monitoring will provide clinicians with valuable feedback and insight into various neurologic conditions such as altered mental status, stroke and traumatic brain injury. We expect this technology will be synergistic with our MRI platform as we connect the care continuum from MRI imaging to sensing.

Industry and Market

MRI is a non-ionizing radiation risk imaging modality widely used by healthcare professionals across various clinical settings for medical diagnosis of a patient, staging of disease and continued assessment following treatment. MRI is noninvasive, and in some cases, eliminates the need for surgical intervention or invasive procedures when used correctly, and offers superior soft tissue contrast resolution compared to other imaging modalities like CT. It is a more sensitive and potentially objective measure of brain tissue and injury. MRI is used to examine central nervous system (“CNS”), musculoskeletal, and other diseases. The prevalence and incidence rates of these diseases has increased across the globe. According to a United Nations report, up to one billion people, nearly one in six of the world’s population, suffer from neurological disorders, including Alzheimer’s and Parkinson’s disease, stroke, multiple sclerosis, epilepsy, migraine, brain injuries and neuroinfections, with some 6.8 million dying of these disorders each year.

The demand for MRI has been augmented by the aging population and rising prevalence of cancer, cardiovascular, neurological and orthopedic conditions. Healthcare professionals and insurers are recognizing imaging as a cost-effective and non-invasive diagnostic for prevention and ongoing monitoring. Swoop is the next generation of these devices that we believe will drive costs down and expand the current $15.9 billion imaging market. Given the significant patient populations in need of diagnostic imaging, we have positioned ourselves in an underpenetrated market with substantial room for growth. In total, we estimate that the global imaging market will increase to a more than $20 billion opportunity across all of our potential use cases. This estimate includes over 100,000 hospitals and outpatient locations that we believe could serve as installation sites for our system. While the current imaging market is mainly limited to high-resource countries, we believe our scanner can help make MRI technology more accessible globally, leading to an increase in both MRI penetration rates and the size of the overall market opportunity.

Market needs

Despite MRI’s advantages to diagnose and monitor patients through treatment, access to MRI scanners can be problematic. Numerous challenges are associated with the use of conventional MRI devices:

13

Due to these challenges, adoption of conventional MRIs has been limited across medical settings in the United States and globally, especially in rural locations where many individuals only have access to small clinics. MRI systems also include additional charges of establishing an MRI suite, patient support areas, machine installation and servicing, software upgrading, and maintenance that burden hospitals and clinics with limited ongoing funding.

There are significant benefits of diagnosing a disease in its early stages, which can reduce time to treatment and improve the quality of life for those patients. We have taken advantage of technological advances in electronics and computing to develop an MRI device that is not only portable, but also uses a very low magnetic field strength, 64 mT (0.064T), which is much lower than the 1.5T or higher field strength of conventional MRI scanners. Our advanced technology provides the ability for healthcare professionals to conduct an MRI scan at the patient’s bedside in the hospital or any clinical setting to begin early diagnosis, intervention and ongoing treatment. Many small- and medium-sized hospitals also consider leasing advanced MRI systems to provide MRI imaging services without undertaking the potentially more costly long-term commitment of purchasing an MRI system. Our Swoop scanner is available for purchase or subscription bundle by medical facilities in the United States with flexible payment options.

According to a 2008 report from the World Health Organization, 90% of the world does not have access to MRI at all largely due to socio-economic factors. Many low-resource countries recognize the benefit of investing in their healthcare infrastructure and it is expected to cause a spur in growth for the global MRI market. For example, China is one of the fastest growing markets that is building their healthcare infrastructure in rural areas. The ability for these countries to build the facilities needed to house these large systems and train highly specialized personnel to operate conventional MRI systems presents a challenge.

Potential market expansion

Brain Sensing Platform

One area for potential market expansion is non-invasive neural monitoring or sensing to assess critical brain health metrics such as cerebral blood flow and intracranial pressure in any clinical, outpatient or home setting. Understanding the vital signs of the brain is paramount in the diagnosis and management of brain disorders yet current care has limited access to important measurements of brain health. Post-operative and general neurological conditions such as stroke, traumatic brain injury, hydrocephalus, removal of brain and spinal tumors, neural tube defects, seizures, CNS vascular anomalies and CNS infections, require extensive monitoring in the ICU and longer-term care to ensure the patient does not experience infection or worsening of their condition. Our technology currently in development has the potential to provide hospitals with real-time monitoring and continuous trend analysis to provide data-backed treatment. To accomplish this, we are building a flexible and extendable noninvasive brain-monitoring platform, creating access to critical brain vital signs throughout the patient care from diagnosis to full recovery. Our approach is to create the neurological equivalent of the stick-on electrocardiogram heart monitor that is a staple in virtually every medical environment. There is a large unmet need in the market for continuous monitoring of chronic neurological conditions. According to market research, the market for global non-invasive brain trauma monitoring devices is expected to grow from approximately $10.1 billion in 2019 to $18.3 billion by 2027, at a CAGR of 7.7%. In addition, we have the potential to ultimately expand our capability to diagnose and manage chronic conditions beyond acute neurological conditions. Our next generation device is expected to contain electroencephalography alongside hemodynamic assessment capabilities to improve quality of care for chronic conditions such as epilepsy, which affects around 50 million people of all ages worldwide. We are currently in product development of our brain sensing technology and hardware platform. We are working toward a clinical proof of concept to demonstrate the technological performance and have begun the process of engaging with the FDA to clarify the regulatory pathway.

14

Products and Services

Our Swoop Portable MR Imaging System

Our Swoop Portable MR Imaging System is designed to address an unmet need in point-of-care medical imaging through a unique combination of hardware and software services. Our hardware is powered by the use of modern computational power and deep learning advances. Our software addresses the traditional ease-of-use and integration challenges often presented by specialized medical technologies. Our system operates from a tablet, smartphone or other WiFi capable device and integrates with picture archiving and communication system (“PACS”) to enable fast and confident clinical decision-making.

Features

Point-of-care neuroimaging - FDA cleared for MRI of the brain and head in patients of all ages

Neuroimaging at the point of care has only been possible using CT, which delivers a significant amount of ionizing radiation. Exposing patients to radiation increases the risk of developing cancer, which limits CT’s use to critically ill patients and makes it particularly hazardous for pediatric patients. CT can visualize bones or blood vessels well when the patient is injected with a contrast agent but is not as sensitive as MRI at imaging the anatomy of the brain.

The gold standard for neuroimaging is MRI, which can provide excellent high-resolution images of the soft tissues on the brain without being obscured by the skull. MRI can provide critical insight into trauma and disease in the brain but historically has simply not been available at the point of care. Because of their size, weight and safety issues, conventional MRI systems were only available in hospitals and major medical centers and outpatient imaging providers, and so patients typically must be transported to the MRI.

We have developed a new category of medical imaging - point of care MRI - that is smaller, lighter weight, and lower cost than conventional MRI, yet maintains the soft tissue visualization capabilities that is critical for neuroimaging. Advanced neuroimaging is now available for patients of all ages at the point of care since we launched our FDA-cleared portable Swoop MRI system in 2020.

Low field system

15

To engineer this new category of point of care MRI, we made several significant design changes with respect to conventional MRI, particularly the magnetic field strength. Over the past 40 years, the goal for improving conventional MRI systems has been to attain higher magnetic field strength. In 2017, the FDA cleared the first 7T MRI, after 20 years of development to establish clinical relevance. It was noted that the added field strength allows for better visualization of smaller structures and subtle pathologies that may improve disease diagnosis. We have taken a different approach by developing our Swoop scanner to have a very low field magnet of 0.064T, which enables MRI to become portable because, unlike conventional MRIs, the field strength of the magnet in our system does not require a specialized radio frequency room to safely house the MRI scanner. This field strength comes from a unique optimization of the magnet size, weight, field uniformity and patented design of the permanent magnet structure that provides sufficient image clarity for diagnostic purposes.

There are additional benefits of operating an MRI system with low field magnet, as it reduces the risk of iron-containing objects becoming projectile and injuring patients or operators, which is a typical concern of conventional MRI systems. Furthermore, the radiofrequency pulses used in conventional MRI are responsible for 55% of the FDA-reported adverse events from MRI, causing skin and internal burns in some patients. Operating at 0.064T means using lower energy radiofrequency pulses and significantly reduced associated safety risks.

Motion correction

Conventional MRI scans regularly suffer from quality problems due to patient motion, with approximately 30% of all scans from inpatient or emergency department exams having moderate or severe image quality issues. Portable MRI at the point of care can provide MRI insights to more critically ill patients than previously possible. We have developed a motion compensation technology to improve image quality in the most challenging and often most in need patients that we recently received FDA clearance for clinical use. We believe that with continued development, our technology can produce diagnostic scans without requiring the operator to make expert adjustments to the scanning procedure due to typical patient movements.

Noise-cancellation technology

Designing a low-field magnet is not sufficient to enable portable MRI. Portable MRI must also address the electromagnetic interference that surrounds us and makes effective conventional MRI outside of a shielded room impossible. Conventional MRI systems are permanently installed in a special room where the walls, floor and ceiling are encased in copper or aluminum to provide a special environment for conventional MRI machines to operate, in which all of the man-made and natural electromagnetic interference is prevented from entering. Installation of these shielded rooms typically costs more than $100,000.

We have developed proprietary and patented noise cancellation technology to enable portable MRI. Our technology works by measuring the external electromagnetic interference and subtracting that from the interference that swamps the MRI signals. The image below shows one slice of an MRI image acquired a) outside a shielded room without noise cancellation, b) outside a shielded room with noise cancellation and c) inside a shielded room without noise cancellation.

Delivery of multiple sequences with tissue contrasts

MRI has the unique capability of providing images with different soft tissue contrasts through a variety of different sequences that can highlight a range of pathologies clearly. Our Swoop portable MRI system generates images with contrast weightings with which physicians are most familiar and which are most clinically useful for the target use cases: T1-weighted, T2-weighted, Fluid-attenuated T2-weighted (T2-FLAIR), and diffusion-weighted (“DWI”) with apparent diffusion coefficient (“ADC”) map images. These contrasts are standard in conventional MRI and allow for differentiation of various tissue types aiding in establishing the diagnosis.

Image quality

16

We deliver diagnostic quality images to healthcare professionals. The images from our Swoop portable MRI system are higher in contrast resolution than other portable medical neuroimaging systems, such as portable CT scanners. Our portable MRI system also delivers comparable image resolution at 1.5 mm x 1.5 mm x 5 mm relative to the typical image resolution of a conventional MRI at 1.0 mm x 1.0 mm x 5 mm. Our MRI signal is produced at 0.064-Tesla (“T”) compared to 1.5T or higher produced by conventional, fixed MRI scanners. We believe that Swoop provides the potential to improve the quality of care for patients who have limited to no accessibility to conventional MRI, which includes 90% of the world’s population.

Controlled by an easy-to-use wireless tablet

We believe it is important to consider usability when significantly changing the way in which a medical device is used, specifically in MRI where conventionally the operator is required to have several years of training. As we seek to reach new markets and new users with our Swoop scanner, we have sought to make the operation of the device as simple and easy to use as possible. We believe this is particularly important when used in emergency situations such as stroke, where time can be critical.

The interfaces to the device are simple intuitive buttons, joystick controls to drive the scanner, and a familiar tablet controller for image acquisition and viewing. The user interface provided on the touch-screen display provides a playlist of protocols based on the use case that can be started, stopped and rearranged, as needed. In addition to being easy-to-use and the consequential acceleration of hospital workflows that can result, our system provides for standardized images across all placement sites due to our uniform manufacturing specifications and a consistent set of sequences that are not customized by individual operators. Conventional MRIs are sequenced by highly-trained technologists and can have variations in image resolution and contrast weighting across sites due to institutional policies and radiologist preferences. We believe the standardization of images across scanners and sites will greatly benefit the ability of radiologists and other healthcare professionals to efficiently read our images and to ultimately build a repository of homogenized image data from which to extract value using data mining and deep learning.

Integration with picture archiving and communication system (PACS) and secure image upload to the Cloud

Similar to many hospital medical devices, our product is designed to seamlessly integrate with the hospital informational technology (“IT”) infrastructure, such that scans can be ordered easily and sent to PACS to be read by a radiologist. For applications where access to such infrastructure is not available, we also offer our own secure cloud based PACS where healthcare professionals including teleradiology service providers can view images from anywhere in the world. We believe that the combination of portable MRI, where scans can be obtained outside the conventional MRI suite, and teleradiology can significantly improve patient care and increase access.

Fully Automated MRI Post-Processing Software

We received FDA clearance for BrainInsight, our first AI applications in January 2021. These applications for automatic labelling, spatial measurements, and volumetric quantification operate on images from our Swoop portable MRI system, automatically add additional insights and associate those insights to the images in the PACS. Using this approach, we intend to grow our portfolio of applications with internal and external development and leveraging the uniquely standardized (and fully anonymized) record of image data we plan to create with our portable MRI system. We believe that bringing the power of AI to MRI has the potential to significantly improve the efficiency of medical imaging in a wide array of use cases, which can benefit the patient by potentially helping to improve outcomes and result in shorter hospital stays.

Design

Location flexibility

Despite the weight of our Swoop scanner being 1,400 lbs., its powered drive system means that it can be transported around the hospital with minimal effort. The Swoop scanner can be moved from bed-to-bed and easily positioned in tight spaces because it can be turned on the spot with a zero turn radius.

Open layout designed to reduce patient anxiety

For an MRI scan in a traditional setting, a patient arrives at the radiology department of a hospital and typically enters through a door covered with radiation warning and other hazard symbols. The patient then proceeds through to a waiting room where they undergo a lengthy safety questionnaire and are asked to remove all clothes and jewelry down to their underwear and put on a hospital gown. Wait times vary from a half hour to several hours before the patient enters the console room and then is led through a large metal door into the RF screen room by themselves. Typical conventional MRI systems

17

are long tubes where the patient is positioned on a motorized bed and RF coils are attached around the patient who has been instructed to lay still. The MRI technician uses the motorized bed to push the patient into the long tube of the large superconducting magnet, leaves the room, closes the metal door to the scan room and tells the patient over an intercom that the scan is about to start. The patient hears the steady mechanical thumping of the cryocooler in the magnet room until the scanning starts, which is then accompanied by often extremely loud acoustic noises. The conventional MRI procedure is often a daunting experience for the patient that can cause significant anxiety, especially for pediatric patients who are separated from their family during this time.

Unlike conventional MRI, our Swoop portable MRI is entirely contained in a system that is just 55 inches tall and 34 inches wide and is designed to scan patients in their own beds. Parents, family, or caregivers can be close by the patient as they are scanned with just their head in the transparent head RF coil. The system is quiet enough to allow constant verbal contact with the patient, and which overall can create a considerably less distressing experience for the patient than conventional MRI.

Powered by a standard wall outlet

To be operable throughout any hospital environment, our Swoop scanner plugs into a standard wall outlet (100-230 VAC, 50/60 Hz, 15A) and uses less than 900W of electricity. This is achieved with low-power electronics, including efficient power supplies and power amplifiers, coupled with a zero-power consumption permanent magnet. Our Swoop scanner does not require many of the components of conventional MRI, including the liquid helium used in conventional MRI superconducting magnets or the associated safety and supporting infrastructure, the chilled water-cooling systems for the power electronics and gradient coils and the room air conditioning needed to extract the heat generated in the separate electronics machine room, or the special 480 V, 3-phase, 200A power supply.

Services

Unlimited training / support resources

Through our subscription model, we offer a number of services to complement the advanced features of our product. As part of our subscription, we offer unlimited user training during the subscription period to make it as easy as possible for healthcare professionals to operate our system. We offer this support primarily as reassurance to our customers although we are confident our customers will be able to operate our user-friendly device with ease and efficiency; in our experience so far, the user training on the system is generally simple and only requires a few hours. Our subscription also provides for unlimited service and maintenance support during the subscription period to offer peace of mind for our customers. In addition to these support services, our subscription includes our Cloud PACS, an unlimited Cloud archive that users can use to upload images for storage purposes, and grants access to our future software upgrades. Recent upgrades include our FDA cleared motion correction technology that improves the quality of images in the presence of motion, as well as other potential future upgrades designed to improve the patient workflow and diagnosis.

Liminal Platform

Liminal’s noninvasive platform is being developed, subject to regulatory authorization, to aid in the diagnosis and management of brain disorders. We believe that understanding the vital signs of the brain for diagnosis and treatment is essential, but the current standard of care is invasive, which limits access. Although there are some non-invasive techniques for measuring the brain such as transcranial doppler (TCD), which has been available since the 1980s, they require specialized technicians to obtain measurements, making them expensive and only available in specialized centers. We are in the early phases of creating our first AEGTM device through the development of novel acoustic sensing techniques and innovative algorithms for measuring key metrics of brain health. We are working to develop a way to monitor the brain and enable access to key brain vital signs, such as cerebral blood flow and intercranial pressure, more easily than currently available technologies. The device is designed to gather continuous data, and is intended to be easy to use and be applied without specialized training. This technology is designed to provide the clinician with valuable feedback and insight into many brain conditions. Its features are designed to increase the accessibility of key brain vitals which could allow clinicians to diagnose earlier, monitor more effectively and intervene.

Similar to Legacy Hyperfine’s Swoop scanner, we expect the use of the AEGTM device will not require any specialized training and will expand access to real-time brain monitoring in patients across the care continuum. We are designing the AEGTM device to enable first responders in the field to use the sensors with ease and to enable healthcare practitioners to monitor the brain during triage, operations, treatment and recovery.

18

Our goal is to create an easy to use but powerful brain monitoring platform that can be used anytime, anywhere. We believe this technology will be synergistic with Legacy Hyperfine’s MRI platform in developing products for patients across the care continuum in sensing, imaging and intervention, in addition to further expanding the growth potential for both businesses in imaging and sensing. We are currently in product development of our brain sensing technology and hardware platform. We are working toward a clinical proof of concept to demonstrate the technological performance and have begun the process of engaging with the FDA to clarify the regulatory pathway. Liminal has not commercialized or obtained regulatory authorization for any of its products and its operations to date have been limited to developing its technology and products.

Our People

Legacy Hyperfine was founded in 2014 and Liminal was founded in 2018 by Dr. Jonathan Rothberg. Our mission is to provide affordable and accessible imaging and monitoring through MRI to revolutionize healthcare for people around the world.

As of February 15, 2022, we had 193 employees, 186 of whom were full-time employees and of whom 56 work in sales, clinical and marketing, 97 work in research, development, manufacturing and operations, and 33 work in general and administrative capacities. As of February 15, 2022, 190 of our employees were located in the United States, two were located in the United Kingdom and one was located in Pakistan. None of our employees are represented by a labor union or are subject to a collective bargaining agreement.

Dr. Rothberg and our business have been recognized for leadership. Legacy Hyperfine and Liminal were founded in 2014 and 2018, respectively, by Dr. Jonathan Rothberg, a serial entrepreneur that received the Presidential Medal of Technology & Innovation in 2016 for inventing a novel next generation DNA sequencing method and has founded more than 10 healthcare and technology companies, including 454 Life Sciences, Ion Torrent, CuraGen, Butterfly Network and Quantum-Si.

Environmental, Social and Governance Practices

As we work toward our mission, we are increasingly focused on providing transparency around our environmental, social and governance (“ESG”) practices and identifying risks related thereto. We are committed to human capital management, patient advocacy and community outreach efforts, corporate governance, and implementing environmental sustainability initiatives.

Environmental Stewardship: We recognize the importance of taking measures to reduce our environmental footprint. As we grow our business, we have initiated certain projects to begin tracking our environmental impact, and where feasible, have taken measures to increase our sustainability efforts. Some of our efforts include our commitment to reduce, reuse or recycle where possible or appropriate and energy efficient projects to lower energy use within our office areas and laboratories.

Human Capital Management: We believe that our people are the reason for our success and we have organized ourselves to maximize productivity and performance. We maintain a high bar for talent and actively work to build diversity within our workforce. Critical to achieving our strategic goals is our ability to build and retain an exceptional team in which each member plays a unique and important role. Employees of Legacy Hyperfine and Liminal continue as employees following the Business Combination.

We recognize that maintaining an engaged and top-notch workforce and a connection with the communities we serve is critical to our success. Comradery and cohesion are at the core of who we are as a company and are integral facets of our human capital management strategy. We are inspired by each other and the possibilities of what we can achieve together. We understand that in order to drive innovation, we must continuously improve our human capital management strategies and find ways to foster engagement and growth within our organization. To this end, below are some of our initiatives:

19

Professional Development Programs and Opportunities: Our greatest asset is our employees and we aspire to provide them with opportunities so they can continue to grow and excel in their functions and our company. Professional growth of our employees leads to engagement, development and allows us to leverage opportunities so we can hire and promote key talent from within. Through development planning, we strive for employees at all levels to focus on strengthening the skills required in their current role and potentially their next role. We are focused on building a culture of continuous coaching, feedback and open communication between managers and their direct reports throughout the entire year. We provide managers and employees with training on how to conduct effective forward-looking performance conversations and to set effective goals that are realistic, measurable, attainable, relevant and timebound.

Diversity, Equity and Inclusion: Our commitment to maintaining a top-performing company means investing in and creating ongoing opportunities for employee development in a diverse and inclusive workplace. We believe that a diverse workforce not only positively impacts our performance, fosters innovation, inspires us to achieve greater results, increases our collective capabilities and strengthens our culture, but it also cultivates an essential pipeline of experienced leaders for management. Hiring for diversity of thought, background and experience, and diversity of personal characteristics such as gender, race and ethnicity is intentional and continues to be an area of focus as we build and grow our workforce.

Compensation, Equity and Benefits: We have designed a broad-based compensation program that is designed to attract, retain and motivate our employees to deliver sustainable long-term value. We seek to deliver performance-driven, market competitive reward opportunities commensurate with company and individual performance. Many of our employees receive equity grants and cash bonuses in addition to base salaries and our benefits package. We believe that providing employees with an ownership interest in our company further strengthens the level of employee engagement. Furthermore, equity awards help align the interests of our employees with the long-term interests of our stockholders. We also offer employees a health insurance package.

Governance, Ethics, and Compliance: Our board of directors is committed to robust corporate governance practices, risk oversight, stockholder rights, diversity, equity and inclusion, corporate sustainability, ethics and compliance in order to protect the long-term interests of our company, stockholders and the patients we serve. Our board of directors adopted corporate governance principles applicable to us, including responsible oversight and management of the Company, effective controls and processes, compliance with SEC and Nasdaq Stock Market rules and regulations, maintaining an engaged board of directors and a board structure that recognizes the importance of diversity, appropriate compensation practices, and succession planning, among other matters.

We will continue to evolve and strengthen our human capital management strategies, increase our environmental efforts, maintain and continue to improve our corporate governance practices, and anticipate reporting on other corporate sustainability measures over time.

Sales, Pricing and Marketing

Marketing

Our marketing efforts are focused on accelerating awareness of our products and capabilities in order to create a strong reputation with clinicians and healthcare administrators. Our go-to-market approach features a targeted sales organization complemented by an array of promotional activities including media coverage, tradeshow exhibition, advertising, and live product demonstration. We principally target acute care hospitals and health systems. In the future, we plan to leverage this approach for both our Swoop Scanner and our future products that have similar end markets.

We recognize the role of education in accelerating clinical adoption of our products across the patient care pathway, including healthcare professionals who currently may not themselves be primary users of MRI technology. To support adoption of our product and in addition to our simplified product interface, we have developed training curriculum and tutorials and built a team of clinically trained customer success managers to guide and coach clinicians on the unique features of our device and on the specific clinical application of our technologies.

Sales and Pricing

The Swoop scanner is commercially available in the United States, and we are seeking necessary regulatory authorizations in other major markets, including the United Kingdom, Australia and other countries. We recently received regulatory authorization in New Zealand and Pakistan. We are building our direct commercial infrastructure in the United States and also have plans to sell our products in other countries either through direct sales or through distributors.

20

We are commercializing our device through two business models: (i) the subscription bundle model, and (ii) the subscription plus ownership model. For both models, we offer subscriptions with software upgrades for 36 or 60 months and an annual pre-payment discount. We have specifically selected these business models to create convenience and widespread adoption.

Subscription bundle model: This model includes a 36-month subscription or a 60-month subscription. The subscription bundle model includes the use of a Swoop scanner and an off-the-shelf tablet for use with the scanner, plus the same subscription benefits provided in the subscription plus ownership model. The subscription fee is based on the term of the subscription, whether prepayment is made, and whether the Swoop scanner will be for commercial or research use.

Subscription plus ownership model: This model provides for the sale of the Swoop scanner, along with an off-the-shelf tablet for use with the scanner, to the customer for an initial payment, which is substantially less expensive than the average cost of $1.2 million for conventional MRI scanners. In addition to purchasing ownership of the system, the customer purchases a 36-month subscription or a 60-month subscription. The subscription fee is based on the term of the subscription, whether prepayment is made, and whether the Swoop scanner will be for commercial or research use.

We believe our subscription-based model has the potential to generate a more predictable recurring revenue stream while helping to foster an ongoing relationship with our customers. To help ensure our customers receive the highest level of customer service, we plan to continue to sell directly to customers and providing ongoing customer support. However, as we expand internationally subject to regulatory authorization in those countries, we may leverage distributors to sell our product depending on the commercial strategy for each country assessed on a country-by-country basis. Through our subscription-based model, we aim to provide MRI systems that are much less expensive than conventional MRI systems and achieve our vision of increasing accessibility to MRI worldwide.

Suppliers and Manufacturing

Our Swoop scanner is built using both custom-made and off-the-shelf components supplied by outside manufacturers and vendors located in the United States, Europe and Asia. One key custom-made component in our Swoop scanner is the magnet, which is manufactured by a single source supplier in Europe. The majority of the other components for the Swoop scanner are off-the-shelf or made using standard processes.

We purchase some of our components and materials used in manufacturing, including magnets, field programmable gate arrays (“FPGAs”), central processing units (“CPUs”) and molded plastics, from single sources. Although we believe that alternative sources of these components and materials would be available, it would take time to identify and validate replacement components, which could negatively affect our ability to supply the Swoop scanner on a timely basis. We cannot give assurances that any alternative supplier would be able to recreate the manufacturing processes currently in use. To mitigate this risk, we typically carry a significant inventory of critical components. We also plan to work with our Swoop scanner device manufacturer, Benchmark Electronics, Inc. ("Benchmark"), to add an additional magnet supplier to the manufacturing process to mitigate the risk to supply of our magnets by the current use of a single supplier.

All of our Swoop scanner devices are manufactured, tested, shipped and supported by Benchmark from its facilities in Nashua, NH. We believe that this manufacturing strategy is efficient and conserves capital. However, in the event it becomes necessary to utilize a different contract manufacturer for our Swoop products, we would experience additional costs, delays and difficulties in doing so, and our business could be harmed.

Key Agreements

Manufacture and Supply Agreement with Benchmark Electronics, Inc.

In October 2018, Legacy Hyperfine entered into a Manufacture and Supply Agreement with Benchmark (the “MSA”). Under the MSA, Benchmark agreed to manufacture our products pursuant to binding purchase orders. Each month, we have agreed to provide Benchmark with a binding purchase order for a period specified by the MSA, as well as a non-binding forecast for each month within such period. If we do not provide the monthly purchase order and forecast update, then the first forecast month of the then-current forecast becomes binding so that a rolling binding commitment to purchase product for the specified period is maintained. The parties have agreed to meet periodically regarding any minimum order quantities of components under the MSA. We also have certain inventory related obligations, including the obligation to purchase excess and obsolete components from Benchmark. Excess components are determined based upon the amount of component inventory that exceeds the build plan for the specified period discussed above. We would be required to purchase such excess inventory and be credited back against future purchases of finished products as the inventory of components is reduced to the amount needed to meet the rolling build plan. Obsolete materials are immediately invoiced once identified. As of February 15, 2022, we have paid approximately $2.2 million for excess components.

21

Under the terms of the MSA, we granted Benchmark a non-exclusive, non-transferable, revocable, fully-paid, royalty-free license, without the right to sublicense, to use our technology solely to manufacture our products. The MSA provides that we will own any right, title and interest in any improvements or modifications to our technology made in the course of performance of Benchmark’s obligations under the MSA. We and Benchmark also agreed to indemnify each other against certain third-party claims.

The MSA has an initial three-year term and will renew automatically for additional two-year terms unless either party gives 180 days’ prior written notice before the end of the then-current term to the other party electing not to renew the agreement. The MSA or any purchase order under the MSA may be terminated by either party for convenience upon 90 days’ prior written notice to the other party. The MSA may also be terminated by either party by written notice upon the occurrence of (i) a breach by the other party under the agreement which is not cured within 30 days after written notice by the terminating party, (ii) the other party becomes insolvent, dissolves, liquidates or ceases to conduct business or (iii) the occurrence of payment-related breaches. Benchmark may also terminate the agreement upon the filing of any petition against us under bankruptcy or similar laws, where such petition is not vacated within 10 days via court order.

Competition

Several large companies, such as General Electric, Siemens, Philips, Hologic, Varian, Fuji, Toshiba, Canon and Hitachi currently dominate the medical imaging market. High regulatory, distribution, manufacturing and service-related long-term contractual costs represent significant barriers to entry for any new player. We expect that the existing market participants will remain key players in the future.

As a general matter, we view competition on two levels:

The primary competition comes from established market participants offering conventional MRI systems. While in developing countries we are experiencing keen interest, the United States and other Western regions already have major market participants that are well entrenched in the market with strong political influence and the ability to delay deployment of our systems.

We are not aware of any competing company that has achieved a portable MRI system. To our knowledge, there are several companies currently in the process of developing this technology, including Promaxo, Neuro42 and Huami.

Intellectual Property

Protection of our intellectual property is a strategic priority for our business. We rely on a combination of patents, trademarks, trade secrets and other intellectual property rights protections and contractual restrictions to protect our proprietary technologies.

The patents owned and in-licensed by us are generally directed to the architecture of Legacy Hyperfine’s MRI systems and related technology, and Liminal’s non-invasive brain sensing and treatment devices and related technology. We have developed a portfolio of issued patents and pending patent applications directed to commercial products and technologies for potential development. We believe that our intellectual property is a core strength of our business, and our strategy includes the continued development of our patent portfolio.

Our Swoop® and Related Technology

As of February 15, 2022, Legacy Hyperfine owned approximately 141 issued patents and approximately 293 pending patent applications. Of Legacy Hyperfine’s approximately 141 issued patents, approximately 80 were issued U.S. utility patents and approximately two were issued U.S. design patents. Of Legacy Hyperfine’s approximately 293 pending patent applications, approximately 81 were pending U.S. utility patent applications. In addition, Legacy Hyperfine owned approximately 59 issued patents in foreign jurisdictions, including Australia, Canada, Japan, China, Taiwan, Korea, Hong Kong, Israel, France, Germany, Ireland, Switzerland/Liechtenstein, and the United Kingdom, and approximately 212 pending patent applications in foreign jurisdictions, including Australia, Canada, Europe, Japan, China, Taiwan, Korea, Hong Kong, Israel, and New Zealand, corresponding to the foregoing. In total, Legacy Hyperfine owns approximately 69 patent families generally directed to its MRI system, including magnet design and manufacturing, electronics and circuitry, mechanical aspects, safety features, noise compensation technology, image formation and analysis software, and various other aspects of MRI systems.

22

These issued patents and pending patent applications (if they were to issue as patents) have expected expiration dates ranging between 2035 and 2042.

Legacy Hyperfine patents and pending patent applications (including types of patent protection and jurisdictions where Legacy Hyperfine has been granted patents or has patent applications pending) directed to its material products are detailed in the table below.

23

24

25

Liminal Non-Invasive Brain Sensor and Related Technology

As of February 15, 2022, Liminal owned approximately 87 pending patent applications. Of Liminal’s approximately 87 pending patent applications, approximately 22 were pending U.S. utility patent applications. In addition, Liminal owned approximately 65 pending patent applications in foreign jurisdictions, including Australia, Canada, China, Europe, Israel, Japan, Korea, and Taiwan, corresponding to the foregoing. In total, Liminal owns approximately 21 patent families generally directed to its brain sensing products, including stimulation and monitoring components, electronics and circuitry, mechanical aspects, and software including AI software algorithms, and various additional features. These pending patent applications (if they were to issue as patents) have expected expiration dates ranging between 2039 and 2041.

Liminal’s patents and pending patent applications (including types of patent protection and jurisdictions where Liminal has been granted patents or has patent applications pending) directed to its material products are detailed in the table below.

In addition to patents, we also rely on trade secrets, technical know-how, and continuing innovation to develop and maintain our competitive position. We seek to protect our proprietary information and other intellectual property by generally

26

requiring our employees, consultants, contractors, suppliers, outside scientific collaborators and other advisors to execute non-disclosure and assignment of invention agreements on commencement of their employment or engagement. Agreements with our employees also forbid them from using or incorporating the proprietary rights of third parties during their engagement with us. We also generally require confidentiality or material transfer agreements from third parties that receive our confidential data or materials.

License Agreements

We have entered into licenses in the ordinary course of business relating to our technologies or other intellectual property rights or assets.

Exclusive License Agreements with The General Hospital Corporation (d/b/a Massachusetts General Hospital)

Legacy Hyperfine entered into an exclusive license agreement with The General Hospital Corporation (d/b/a Massachusetts General Hospital) (“MGH”) effective in May 2014 (the “May Agreement”) and an exclusive license agreement with MGH effective in June 2014 (the “June Agreement”), respectively, under each of which Legacy Hyperfine acquired an exclusive and worldwide license to specified patent rights owned by MGH relating to MRI technology. The licenses granted to us are subject to the right of MGH and not-for-profit academic, government and other not-for-profit institutions to make and to use the subject matter described or claimed in the rights granted under the licensed patents for research and educational purposes and, for any licensed patents that are supported by federal funding, the licenses granted to us are subject to certain rights, conditions and limitations imposed by U.S. law, including a royalty-free, non-exclusive license granted to the U.S. government and a requirement that any products used or sold in the United States must be manufactured substantially in the United States.

Under the terms of each of the license agreements, we have agreed to pay MGH an annual maintenance fee and agreed to reimburse MGH for certain patent related fees and costs incurred by MGH, including past patent fees and costs. If we enter into a sublicense under either license agreement, we will be obligated to pay MGH a percentage in the mid-teens of certain consideration paid to us by the sublicensee. As of February 15, 2022, the aggregate amounts paid under the May Agreement and June Agreement were $25,522 and $19,762, respectively.

We are required to use commercially reasonable efforts to develop and commercialize licensed products and licensed processes under each of the license agreements. In particular, we were required to achieve a specified development and commercialization milestone by a specified date.

Under the terms of each of the license agreements, MGH has retained the right to practice the licensed patent rights within the licensed fields for research and educational purposes only.

Each of the license agreements expires upon the expiration of the last to expire licensed patent, which is set to expire in 2035. We have the right to terminate either agreement for any reason by giving advance written notice to MGH. MGH has the right to terminate either agreement if we fail, subject to a specified cure period, to pay any amounts due and payable under either agreement to MGH, we otherwise materially breach either agreement and fail to cure such breach within a specified cure period, we fail to maintain insurance coverage as required under either agreement, we become insolvent, or make an assignment for the benefit of our creditors, or have a petition in bankruptcy filed for or against us, or we or a sublicensee challenges the licensed patent rights in a legal or administrative proceeding. Either agreement otherwise terminates upon the expiration or abandonment of all licensed patents and patent applications.

Government Regulation

Diagnostic and therapeutic medical devices like those we developed and distributed are subject to regulation by numerous regulatory bodies, including the U.S. Food and Drug Administration (“FDA”) and comparable international regulatory agencies. These agencies require developers of medical devices to comply with applicable laws and regulations governing the development, testing, manufacturing, packaging, labeling, marketing and distribution of medical devices. Devices are generally subject to varying levels of regulatory control, the most comprehensive of which requires that a clinical evaluation program be conducted before a device can be approved for marketing and commercial distribution. In addition, healthcare regulatory bodies in the United States and around the world impose a range of requirements related to paying for medical devices and the procedures in which they are used, including laws intended to prevent fraud, waste, and abuse of healthcare dollars.

27

U.S. Laws and Regulations

In the United States, medical devices are subject to extensive regulation at the federal level by the FDA under the Federal Food, Drug, and Cosmetic Act (“FDCA”) and its implementing regulations. The laws and regulations govern, among other things, medical device design and development, nonclinical and clinical testing, pre-market clearance, authorization or approval, establishment registration and product listing, product manufacturing, product packaging and labeling, product storage, advertising and promotion, product distribution, recalls and field actions, servicing and post-market clinical surveillance. A number of U.S. states also impose licensing and compliance regimes on companies that manufacture or distribute prescription devices into or within the state.

Some of our products are also subject to the Radiation Control for Health and Safety Act, administered by the FDA, which imposes performance standards and record keeping, reporting, product testing and product labeling requirements for electronic products that emit radiation, such as magnetic resonance imaging systems.

In addition, the commercialization and use of our devices in the United States is subject to regulation by the U.S. Department of Health and Human Services (“HHS”) and state agencies responsible for reimbursement and regulation of payment for healthcare items and services. Federal laws and regulations apply primarily in connection with government payer programs such as the Medicare and Medicaid programs, but state laws apply more broadly, encompassing healthcare items and services covered by private payers. At the state and federal level, the government’s interest is in regulating the quality and cost of healthcare and protecting the independent clinical judgment of licensed healthcare providers.

The Federal Trade Commission (“FTC”) also oversees the advertising and promotion of our products pursuant to broad authority to police deceptive advertising for goods or services within the United States. Under the Federal Trade Commission Act, the FTC is empowered, among other things, to (a) prevent unfair methods of competition and unfair or deceptive acts or practices in or affecting commerce; (b) seek monetary redress and other relief for conduct injurious to consumers; and (c) gather and compile information and conduct investigations relating to the organization, business, practices, and management of entities engaged in commerce. In the context of performance claims for products such as our goods and services, compliance with the FTC Act includes ensuring that there is scientific data to substantiate the claims being made, that the advertising is neither false nor misleading, and that any user testimonials or endorsements we or our agents disseminate related to the goods or services comply with disclosure and other regulatory requirements. In addition, with respect to our commercial products and any future products that are marketed as clinical products, FDA’s regulations applicable to medical device products prohibit them from being promoted for uses not within the scope of a given product’s intended use(s), among other promotional and labeling rules applicable to products subject to the FDCA.

Further, medical device systems that include wireless radio frequency transmitters and/or receivers are subject to equipment authorization requirements in the United States. The Federal Communications Commission (“FCC”) requires advance clearance of all radio frequency devices before they can be sold or marketed in the United States. These clearances ensure that the proposed products comply with FCC radio frequency emission and power level standards and will not cause interference.

When Liminal’s products are marketed for clinical monitoring or therapeutic uses, they will be regulated by the FDA as medical devices. It is presently unclear what level of risk the agency will assign to such products, what special controls may be imposed on such products (if any), and what regulatory requirements would be applicable to such products.

28

FDA Regulation of Medical Devices

Medical devices must undergo pre-market review by and receive clearance, authorization, or approval from the FDA prior to commercialization, unless the device is of a type exempted from such review by statute, regulation, or an FDA exercise of enforcement discretion. The FDA classifies medical devices into three classes based on risk. Regulatory control increases from Class I (lowest risk) to Class III (highest risk). The FDA generally must clear or approve the commercial sale of most new medical devices that fall within product categories designated as Class II and III. Commercial sales of most Class II and III medical devices within the United States must be preceded either by pre-market notification and FDA clearance pursuant to Section 510(k) of the FDCA (Class II) or by the granting of a pre-market approval (“PMA”) (Class III), after a pre-market application is submitted. Both 510(k) notifications and PMA applications must be submitted to FDA with significant user fees (over $12,000 for a 510(k) and $374,000 for a PMA in FY 2022), although reduced fees for small businesses are available. Class I devices are generally exempt from pre-market review and notification, as are some moderate-risk Class II devices. Manufacturers of all classes of devices must comply with FDA’s Quality System Regulation (“QSR”), establishment registration, medical device listing, labeling requirements, and medical device reporting (“MDR”) regulations, which are collectively referred to as medical device general controls. Class II devices may also be subject to special controls such as performance standards, post-market surveillance, FDA guidelines, or particularized labeling. Some Class I and Class II devices may be exempted by regulation from the requirement of compliance with substantially all of the QSR.

510(k) Clearance Pathway

A 510(k) pre-market notification must contain information sufficient to demonstrate that the new device is substantially equivalent to a device commercially distributed prior to May 28, 1976 or to a device that has been determined by the FDA to be substantially equivalent to such a so-called “pre-amendments” device. To obtain 510(k) clearance for a non-exempt Class II device, the product developer must submit a pre-market notification to FDA demonstrating that its product is substantially equivalent to such a predicate device. The FDA’s 510(k) clearance process generally takes from three to 12 months from the date the application is submitted, but it may take significantly longer if FDA has significant questions or needs more information about the new device or its manufacturing or quality controls.

As part of the 510(k) notification process for Class II devices that have an existing classification regulation available for purposes of the regulatory filing, the FDA may require the following:

Assuming successful completion of all required testing, a detailed 510(k) notification is submitted to the FDA requesting clearance to market the product. This premarket notification includes all relevant data from pertinent nonclinical studies and clinical trials (if applicable), together with detailed information relating to the product’s manufacturing controls and proposed labeling, and other relevant documentation. The FDA evaluates all 510(k) submissions prior to filing for substantive review based on specific acceptance criteria and may issue a refuse-to-accept notification if the submission is deficient with respect to any of the established criteria. If the FDA determines that the applicant’s device is substantially equivalent to the identified predicate device(s), the agency will issue a 510(k) clearance letter that authorizes commercial marketing of the device for one or more specific indications for use. If the FDA determines that the applicant’s device is not substantially equivalent to the predicate device(s), the agency will issue a not-substantially-equivalent letter stating that the new device may not be commercially distributed.

After a new medical device receives 510(k) clearance from the FDA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance or could require the submission of a PMA. The FDA requires each manufacturer to make the determination of whether a device modification requires a new 510(k) notification or PMA in the first instance, but the FDA may review any such decision. If the FDA disagrees with a manufacturer’s decision not to seek a new 510(k) clearance or PMA for a particular change, the FDA may retroactively require the manufacturer to submit a 510(k) pre-market notification or a PMA. The FDA may also require the manufacturer to cease U.S. marketing and/or recall any distributed units of the modified device until 510(k) clearance or PMA approval for the modification is obtained.

29

De Novo Classification

If a previously unclassified new medical device does not qualify for the 510(k) pre-market notification process because no predicate device to which it is substantially equivalent can be identified, the device is automatically classified into Class III. However, if such a device would be considered low or moderate risk (in other words, it does not rise to the level of requiring the approval of a PMA), it may be eligible for the De Novo classification process. The De Novo classification process allows a device developer to request that the novel medical device be reclassified as either a Class I or Class II device, rather than having it regulated as a high-risk Class III device subject to the PMA requirements. If the manufacturer seeks reclassification into Class II, the classification request must include a draft proposal for special controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device.

Under the FDCA, the FDA is required to classify a device within 120 days following receipt of the De Novo classification request from an applicant; however, the most recent FDA performance review goals state that in fiscal year 2022, FDA will attempt to issue a decision within 150 days of receipt on 70% of De Novo requests received during fiscal year 2022. De Novo classification requests are subject to user fees, unless a specific exemption applies (over $112,000 in FY 2022).

As with the 510(k) pre-market notification process described above, any modification to a device authorized through the De Novo process that could significantly affect the safety or effectiveness of such device, or that would constitute a major change in its intended use, requires a new 510(k) clearance or could require the submission of a PMA.

In October 2021, FDA issued a final rule that would formally codify requirements for the medical device De Novo process and the procedures and criteria for product developers to file a De Novo classification request (86 Fed. Reg. 54,826). Over the twenty years preceding the final rule, the De Novo process has been implemented by FDA pursuant to statutory authorities and somewhat organically through informal guidance and iterative changes by Congress. Although the final rule does not affect marketed products such as our marketed products, and likely will not be expected to impact products in current development, the FDA’s goals in promulgating the final rule are to create a predictable, consistent, and transparent De Novo classification process for innovative medical device developers.

As an alternative to the De Novo classification process, a company could also file a reclassification petition seeking to change the automatic Class III designation of a novel post-amendment device under Section 513(f)(3) of the FDCA. FDA can also initiate reclassification of an existing device type on its own initiative. In December 2018, FDA issued a final rule to clarify the administrative process through which the FDA reclassifies a medical device. To reclassify a device under Section 513(e) of the FDCA, the FDA must first publish a proposed reclassification order that includes a summary of the valid scientific evidence that supports the reclassification; convene a device classification panel meeting; and consider comments to the public docket before it then publishes a final reclassification order in the Federal Register.

Pre-market Approval Pathway

Our point-of-care MRI systems have been classified and are regulated as Class II devices, although future products that we develop may be classified as Class III devices. Products classified by FDA as Class III generally require marketing approval via a PMA. A PMA application must be supported by valid scientific evidence, which typically requires extensive data, including technical, nonclinical, clinical, manufacturing and labeling data, to demonstrate to the FDA’s satisfaction the safety and efficacy of the device for its intended use(s). A PMA application also must include a complete description of the device and its components, a detailed description of the methods, facilities and controls used to manufacture the device, and proposed labeling. After a PMA application is submitted and found to be sufficiently complete, it is considered “filed” and the FDA begins an in-depth review of the submitted information. During this substantive review period, the FDA may request additional information or clarification of information already provided. Also during the review period, an advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA. In addition, the FDA generally will conduct a pre-approval inspection of the manufacturing facility to evaluate compliance with the QSR, which requires manufacturers to implement and follow design, testing, control, documentation and other quality assurance procedures.

FDA review of a PMA application is required to be completed within 180 days of the application’s filing date although the process generally takes between one and three years, but may take significantly longer. The current user fee agreement between FDA and the medical device industry sets as a target for PMA reviews to be completed in under one year. The FDA can delay, limit or deny approval of a PMA application for many reasons, including:

30

If an FDA evaluation of a PMA application or manufacturing facilities is favorable, the FDA will either issue an approval letter, or approvable letter, which usually contains a number of conditions which must be met in order to secure final approval of the PMA.

When and if those conditions have been fulfilled to the satisfaction of the FDA, the agency will issue a PMA approval letter authorizing commercial marketing of a device, subject to the conditions of approval and the limitations established in the approval letter. If the FDA’s evaluation of a PMA application or manufacturing facilities is not favorable, the FDA will deny approval of the PMA or issue a not approvable letter. The FDA may also determine that additional trials are necessary, in which case the PMA approval may be delayed for several months or years while the trials are conducted and data is submitted in an amendment to the PMA. The PMA process can be expensive, uncertain and lengthy. PMA approval may also be granted with post-approval requirements such as the need for additional patient follow-up for an indefinite period of time.

New PMA applications or PMA supplements may be required for modifications to the manufacturing process, labeling, device specifications, materials or design of a device that is approved through the PMA process. PMA supplements often require submission of the same type of information as an initial PMA application, except that the supplement is limited to information needed to support any changes from the device covered by the approved PMA application and may or may not require as extensive clinical data or the convening of an advisory panel.

Clinical Investigations Using Devices in Development

Clinical trials are almost always required to support a PMA application and are sometimes required for a De Novo classification request or 510(k) pre-market notification. In order to conduct a clinical investigation involving human subjects for the purpose of demonstrating the safety and effectiveness of a medical device, an investigator acting on behalf of the company must, among other things, apply for and obtain Institutional Review Board (“IRB”) approval of the proposed investigation. In addition, if the clinical study involves a “significant risk” (as defined by the FDA) to human health, the company sponsoring the investigation (referred to as the “sponsor”) must also submit and obtain FDA approval of an Investigational Device Exemption (“IDE”) application. An IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE application must be approved in advance by the FDA for a specified number of study participants, unless the product is deemed a non-significant risk device and eligible for abbreviated IDE requirements. Generally, clinical trials for a significant risk device may begin once the IDE application is approved by the FDA and the study protocol and informed consent are approved by a duly-appointed IRB for clinical trial site. FDA’s IDE regulations govern investigational device labeling, prohibit promotion, and specify an array of Good Clinical Practice (“GCP”) requirements, which include, among other things, recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. Clinical trials must further comply with the FDA’s regulations for IRB approval and for informed consent and other human subject protections. Required records and reports are subject to inspection by the FDA. The results of clinical testing may be unfavorable or, even if the intended safety and efficacy success criteria are achieved, may not be considered sufficient for the FDA to grant approval or clearance of a product.

The commencement or completion of any of our clinical trials may be delayed or halted, or be inadequate to support approval of a PMA application (or FDA’s grant of a De Novo classification request or clearance of a 510(k) notification, as applicable), for numerous reasons, including, but not limited to, the following:

31

Ongoing Post-Market Regulatory Requirements and FDA Enforcement

In 2020, Legacy Hyperfine received 510(k) clearance from the FDA for its point-of-care MRI system. In addition, our proprietary BrainInsight product is fully automated MRI post-processing medical software that is regulated as a picture archiving and communications system, which may include both hardware and software components, and which is classified by FDA as a Class II medical device. BrainInsight received 510(k) marketing clearance in January 2021 for use in automatic labeling, spatial measurement, and volumetric quantification of brain structures from a set of low-field MR images and to return annotated and segmented images, color overlays, and reports. More recently, in November 2021, Legacy Hyperfine received 510(k) clearance for its new advanced image reconstruction technology using deep learning.

After a medical device is authorized for marketing and placed in commercial distribution (or, for 510(k)-exempt products, placed into commerce without first obtaining FDA clearance or approval), numerous regulatory requirements apply. These general controls that must be met for all device classes include:

32

FDA’s MDR requirements also extend to healthcare facilities that use medical devices in providing care to patients, or “device user facilities,” which include hospitals, ambulatory surgical facilities, nursing homes, outpatient diagnostic facilities, or outpatient treatment facilities, but not physician offices. A device user facility must report any device-related death to both the FDA and the device manufacturer, or any device-related serious injury to the manufacturer (or, if the manufacturer is unknown, to the FDA) within 10 days of the event. Device user facilities are not required to report device malfunctions that would likely cause or contribute to death or serious injury if the malfunction were to recur but may voluntarily report such malfunctions through MedWatch, the FDA’s Safety Information and Adverse Event Reporting Program.

To ensure compliance with regulatory requirements, medical device manufacturers are subject to market surveillance and periodic, pre-scheduled and unannounced inspections by the FDA and certain state authorities. Failure to comply with applicable regulatory requirements can result in enforcement action by the FDA, which may lead to any of the following sanctions:

We and any of our contract manufacturers, and some suppliers of components or device accessories, are required to manufacture medical device products in compliance with current Good Manufacturing Practice requirements set forth in the QSR, unless explicitly exempted by regulation. The QSR requires a quality system for the design, manufacture, packaging, labeling, storage, installation and servicing of marketed devices, and includes extensive requirements with respect to quality management and organization, device design, buildings, equipment, purchase and handling of components or services, production and process controls, packaging and labeling controls, device evaluation, distribution, installation, complaint handling, servicing, and record keeping. The FDA evaluates compliance with the QSR through periodic pre-scheduled or unannounced inspections that may include registered manufacturing facilities of our subcontractors. Following such inspections, FDA may issue reports known as Forms FDA 483 or Notices of Inspectional Observations, which list instances where the FDA inspector believes the manufacturer has failed to comply with applicable regulations and/or procedures. If the observations are sufficiently serious or the manufacturer fails to respond appropriately, the FDA may issue Warning Letters, which are notices of intended enforcement actions against the manufacturer. For less serious violations that may not rise to the level of regulatory significance, FDA may issue Untitled Letters. FDA may take more significant administrative or legal action if a manufacturer continues to be in substantial noncompliance with applicable regulations.

For example, if the FDA believes we or any of our contract manufacturers or regulated suppliers are not in compliance with these requirements and patients are being subjected to serious risks, it can shut down manufacturing operations, require recalls of our medical device products, refuse to approve new marketing applications, initiate legal proceedings to detain or seize products, enjoin future violations, or assess civil and criminal penalties against us or our officers or other employees. Any such action by the FDA would have a material adverse effect on our business. We may be unable to comply with all applicable FDA regulations.

33

U.S. Fraud and Abuse Laws and Other Compliance Requirements

Successfully commercializing a medical device or technology depends not on only FDA approval, but also on broad health insurance or third party payor coverage. Government and private payors institute coverage criteria to ensure the appropriate utilization of products and services and to control costs. Limited third party payor coverage for a technology or procedure may limit adoption and commercial viability, while broader coverage supports optimal market uptake. Favorable coverage decisions by government payors like Medicare or Medicaid is critical because private payors typically follow the government’s lead regarding reimbursement. However, manufacturers whose technology is reimbursed by government payors are subject to various U.S. federal and state laws pertaining to healthcare fraud and abuse. These laws can be implicated by inappropriate sales and marketing arrangements with healthcare providers. Many commonly accepted commercial practices are illegal in the healthcare industry and violations of these laws are punishable by criminal and civil sanctions, including, in some instances, exclusion from participation in U.S. federal and state healthcare programs, including Medicare and Medicaid.

Anti-kickback Laws. The federal Anti-Kickback Statute prohibits persons from knowingly and willfully soliciting, receiving, offering or providing remuneration directly or indirectly to induce either the referral of an individual, or the furnishing, recommending, or arranging of a good or service, for which payment may be made under a federal healthcare program such as Medicare and Medicaid. The definition of “remuneration” has been broadly interpreted to include anything of value, including such items as gifts, discounts, the furnishing of supplies or equipment, credit arrangements, waiver of payments, and providing anything at less than its fair market value. The Department of Health and Human Services - Office of the Inspector General, has issued regulations, commonly known as safe harbors, which set forth certain provisions that, if satisfied in their entirety, will assure healthcare providers and other parties that they will not be prosecuted under the federal Anti-Kickback Statute. The failure of a transaction or arrangement to fit precisely within one or more safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that do not fully satisfy each applicable safe harbor element may result in increased scrutiny by government enforcement authorities or invite litigation by private citizens under federal whistleblower laws. The Anti-Kickback law is broadly interpreted and aggressively enforced with the result that beneficial commercial arrangements can be criminalized in the healthcare industry because of the Anti-Kickback law.

The penalties for violating the federal Anti-Kickback Statute include imprisonment for up to ten years, fines of up to $100,000 per violation and possible exclusion from federal healthcare programs such as Medicare and Medicaid. Many states have adopted prohibitions similar to the federal Anti-Kickback Statute, some of which apply to the referral of patients for healthcare services reimbursed by any source, not only by the government programs such as Medicare and Medicaid.

Federal False Claims Act. The federal False Claims Act prohibits knowingly presenting, or causing to be presented a false claim or the knowing use of false statements or records to obtain payment from the federal government. When an entity is determined to have violated the False Claims Act, it must pay three times the actual damages sustained by the government, plus mandatory civil penalties of between $11,181 and $22,363 for each separate false claim. Suits filed under the False Claims Act, known as “qui tam” actions, can be brought by any individual on behalf of the government and such individuals (known as “relators” or, more commonly, as “whistleblowers”) may share in any amounts paid by the entity to the government in fines or settlement. In addition, certain states have enacted laws modeled after the federal False Claims Act. Qui tam actions have increased significantly in recent years, causing greater numbers of healthcare companies to have to defend a false claim action, even before the validity of the claim is established and even if the government decides not to intervene in the lawsuit. Healthcare companies may decide to agree to large settlements with the government and/or whistleblowers to avoid the cost and negative publicity associated with litigation. In addition, the Affordable Care Act amended federal law to provide that a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act. Criminal prosecution is possible for knowingly making or presenting a false or fictitious or fraudulent claim to the federal government.

Federal Physician Self-Referral Law. The Federal Physician Self-Referral Law, also referred to as the Stark Law, prohibits a physician (or an immediate family member of a physician) who has a financial relationship with an entity from referring patients to that entity for certain designated health services, including durable medical equipment and supplies, payable by Medicare, unless an exception applies. The Stark Law also prohibits such an entity from presenting or causing to be presented a claim to the Medicare program for such designated health services provided pursuant to a prohibited referral, and provides that certain collections related to any such claims must be refunded in a timely manner. Exceptions to the Stark Law include, among other things, exceptions for certain financial relationships, including both ownership and compensation arrangements. The Stark Law is a strict liability statute: to the extent that the statute is implicated and an exception does not apply, the statute is violated. In addition to the Stark Law, many states have implemented similar physician self-referral prohibitions that may extend to Medicaid, third party payors, and self-pay patients. Violations of the Stark Law must be

34

reported and unauthorized claims must be refunded to Medicare in order to avoid potential liability under the federal False Claims Act for avoiding a known obligation to return identified overpayments. Violations of the Stark Law, the Anti-Kickback Statute, the Civil Monetary Penalties Law and/or the federal False Claims Act can also form the basis for exclusion from participation in federal and state healthcare programs.

Civil Monetary Penalties Law. The Civil Monetary Penalties Law (“CMPL”) authorizes the imposition of substantial civil money penalties against an entity that engages in certain prohibited activities including but not limited to violations of the Stark Law or Anti-Kickback Statute, knowing submission of a false or fraudulent claim, employment of an excluded individual, and the provision or offer of anything of value to a Medicare or Medicaid beneficiary that the transferring party knows or should know is likely to influence beneficiary selection of a particular provider for which payment may be made in whole or part by a federal healthcare program, commonly known as the Beneficiary Inducement CMP. Remuneration is defined under the CMPL as any transfer of items or services for free or for less than fair market value. There are certain exceptions to the definition of remuneration for offerings that meet the Financial Need, Preventative Care, or Promoting Access to Care exceptions (as defined in the CMPL). Sanctions for violations of the CMPL include civil monetary penalties and administrative penalties up to and including exclusion from participation in federal healthcare programs.

State Analogs of Federal Fraud and Abuse Laws. Many U.S. states have their own laws intended to protect against fraud and abuse in the healthcare industry and more broadly. In some cases these laws prohibit or regulate additional conduct beyond what federal law affects. Penalties for violating these laws can range from fines to criminal sanctions.

HIPAA. The Health Insurance Portability and Accountability Act of 1996, as amended by the American Recovery and Reinvestment Act of 2009, and implementing regulations (“HIPAA”), created two new federal crimes: healthcare fraud and false statements relating to healthcare matters. The healthcare fraud statute prohibits knowingly and willfully executing a scheme to defraud any healthcare benefit program, including private payors. A violation of this statute is a felony and may result in fines, imprisonment or exclusion from government sponsored programs. The false statements statute prohibits knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services.

FCPA and Other Anti-Bribery and Anti-Corruption Laws. The U.S. Foreign Corrupt Practices Act (“FCPA”) prohibits U.S. corporations and their representatives from offering, promising, authorizing or making payments to any foreign government official, government staff member, political party or political candidate in an attempt to obtain or retain business abroad. The scope of the FCPA would include interactions with certain healthcare professionals or organizations in many countries. Our present and future business has been and will continue to be subject to various other U.S. and foreign laws, rules and/or regulations.

Physician Payment Sunshine Act. Manufacturers of U.S. FDA-regulated devices reimbursable by federal healthcare programs are subject to the Physician Payment Sunshine Act, which requires manufacturers to track and annually report certain payments and other transfers of value made to U.S.-licensed physicians or U.S. teaching hospitals. As a manufacturer of U.S. FDA regulated devices reimbursable by federal healthcare programs, we are subject to this law. We are also required to report certain ownership interests held by physicians and their immediate family members. In 2018, the law was extended to require tracking and reporting of transfers of value to physician assistants, nurse practitioners, and other mid-level practitioners. The law carries penalties of up to $1.15 million per year for violations, depending on the circumstances, and payments reported also have the potential to draw scrutiny on payments to and relationships with physicians, which may have implications under the Anti-Kickback Statute, Stark Law and other healthcare laws.

In addition, there has been a recent trend of increased federal and state regulation of payments and other transfers of value provided to healthcare professionals and entities. Similar to the federal law, certain states also have adopted marketing and/or transparency laws relevant to device manufacturers, some of which are broader in scope. Certain states also mandate that device manufacturers implement compliance programs. Other states impose restrictions on device manufacturer marketing practices and require tracking and reporting of gifts, compensation, and other remuneration to healthcare professionals and entities. The need to build and maintain a robust compliance program with different compliance and/or reporting requirements increases the possibility that a healthcare company may violate one or more of the requirements, resulting in fines and penalties.

U.S. and European Data Security and Data Privacy Laws

HIPAA, as well as a number of other federal and state privacy-related laws, extensively regulate the use and disclosure of individually identifiable health information, known as “protected health information” or “PHI.” HIPAA applies to health plans, healthcare providers who engage in certain standard healthcare transactions electronically, such as electronic billing, and healthcare clearinghouses, all of which are referred to as “covered entities” under HIPAA. State imposed health

35

information privacy and security laws typically apply based on licensure, for example, licensed providers or licensed entities are limited in their ability to use and share health information.

Additionally, all states have enacted legislation protecting the privacy and security of “personal information” such as identifiable financial or health information, social security number and credit card information. These laws overlap and apply simultaneously with federal privacy and security requirements and regulated entities must comply with all of them. The California Consumer Privacy Act (“CCPA”), which went into effect January 1, 2020, is one of the most restrictive state privacy laws, protecting a wide variety of personal information and granting significant rights to California residents with respect to their personal information. In dealing with health information for the development of its technology or for commercial purposes, we will be indirectly affected by HIPAA and state-imposed health information privacy and security laws because these laws regulate the ability of our customers and research collaborators to share health information with us. Additionally, we must identify and comply with all applicable state laws for the protection of personal information with respect to employee information or other personal information that we collect.

In the European Union, increasingly stringent data protection and privacy rules that have and will continue to have substantial impact on the use of personal and patient data across the healthcare industry became stronger in May 2018. The EU General Data Protection Regulation, (“GDPR”) applies across the European Union and includes, among other things, a requirement for prompt notice of data breaches to data subjects and supervisory authorities in certain circumstances and significant fines for non-compliance. The GDPR fine framework can be up to 20 million euros, or up to 4% of our total global turnover of the preceding fiscal year, whichever is higher. The GDPR sets out a number of requirements that must be complied with when handling the personal data of such European Union-based data subjects including: providing expanded disclosures about how their personal data will be used; higher standards for organizations to demonstrate that they have obtained valid consent or have another legal basis in place to justify their data processing activities; the obligation to appoint data protection officers in certain circumstances; new rights for individuals to be “forgotten” and rights to data portability, as well as enhanced current rights (e.g. access requests); the principal of accountability and demonstrating compliance through policies, procedures, training and audit; and the new mandatory data breach regime. In particular, medical or health data, genetic data and biometric data where the latter is used to uniquely identify an individual are all classified as “special category” data under the GDPR and are afforded greater protection and require additional compliance measures. Noncompliance could result in the imposition of fines, penalties, data lockup or orders to stop noncompliant activities. We may be subject to GDPR if we undertake operations in the EU, offer products or services to individuals in the EU or monitor the behavior of individuals within the EU. Our research activities in the EU currently implicate the GDPR and if we undertake commercial operations in the EU, offer products or services to individuals in the EU or monitor the behavior of individuals within the EU, we will have additional compliance obligations.

We could also be subject to evolving European Union laws on data export, for transfers of data outside the European Union to themselves, group companies or third parties. The GDPR only permits exports of data outside the European Union to jurisdictions that ensure an adequate level of data protection. The United States has not been deemed to offer an adequate level of protection, so in order for us to transfer personal data from the EU to the United States, we must identify a legal basis for data transfer (e.g., the European Union Commission approved Standard Contractual Clauses). On July 16, 2020, the Court of Justice of the European Union or the CJEU, issued a landmark opinion in the case Maximilian Schrems vs. Facebook (Case C-311/18), called Schrems II. This decision (a) calls into question commonly relied upon data transfer mechanisms as between the European Union member states and the United States (such as the Standard Contractual Clauses) and (b) invalidates the EU-U.S. Privacy Shield on which many companies had relied as an acceptable mechanism for transferring such data from the EU to the United States. The CJEU is the highest court in Europe and the Schrems II decision heightens the burden on data importers to assess U.S. national security laws on their business and future actions of European Union data protection authorities are difficult to predict.

Further, the United Kingdom’s decision to leave the European Union, often referred to as Brexit, has created uncertainty with regard to data protection regulation in the United Kingdom. In particular, while the Data Protection Act of 2018 that “implements” and complements the GDPR achieved Royal Assent on May 23, 2018 and is now effective in the United Kingdom, it is still unclear whether transfer of data from the European Economic Area to the United Kingdom will remain lawful under GDPR.

International Regulation of Medical Devices

International marketing and distribution of medical devices are subject to regulation by foreign governments, and such regulations may vary substantially from country to country. The time required to obtain marketing authorization in a foreign country may be longer or shorter than that required for FDA clearance or approval, and the requirements may differ. There is

36

a trend towards harmonization of quality system standards among the European Union, United States, Canada and various other industrialized countries.

The primary regulatory environment in Europe is that of the European Economic Area (the “EEA”), which is comprised of the 27 Member States of the European Union (the “EU”), Iceland, Liechtenstein and Norway. In the EEA, medical devices were previously required to comply with the Essential Requirements defined in Annex I to the EU Medical Devices Directive (“MDD”) (applicable in the non-EU EEA Member States via the Agreement on the European Economic Area), a coordinated system for the authorization of medical devices. The directives and standards outlined in the MDD regulate the design, manufacture, clinical trials, labeling and adverse event reporting for medical devices. Devices that comply with the requirements of a relevant directive are entitled to bear the CE conformity marking, indicating that the device conforms to the essential requirements of the applicable directives and, accordingly, can be commercially distributed throughout the EEA. The method of assessing conformity varies depending on the class of the product, but normally involves a combination of self-assessment by the manufacturer and a third-party assessment by a “Notified Body,” an organization designated by an EU country to assess a product’s conformity with the applicable legal requirements. This third-party assessment may consist of an audit of the manufacturer’s quality system and specific testing of the manufacturer’s product. An assessment by a Notified Body of one country within the EU is required in order for a manufacturer to commercially distribute the product throughout the EU.

In 2017, European Union regulatory bodies finalized a new Medical Device Regulation, which replaced the existing MDD framework and provided three years for transition and compliance, for a final effective date of May 26, 2020. As a result of the COVID-19 pandemic, however, the European Parliament voted in April 2020 to postpone implementation of the Medical Device Regulation by one year, giving the medical device industry and Notified Bodies until May 26, 2021 to come into compliance. The Medical Device Regulation changes several aspects of the existing regulatory framework for medical device marketing in Europe and is expected to result in increased regulatory oversight of all medical devices marketed in the EU, which may, in turn, increase the costs, time and requirements that need to be met in order to place an innovative or high-risk medical device on the European market. In particular, the new regulations, among other things:

European medical device manufacturers and distributors are currently benefiting from a grace period for legacy MDD certificates that lasts until May 26, 2024. For a product to qualify for the grace period, there must be no significant changes to such a legacy medical device as described in its existing MDD certificate; the recertification process under the Medical Device Regulation requires a demonstration that the performance and the safety of the currently marketed medical device has been maintained and that the system meets the new regulatory requirements.

Outside of the European Union, regulatory authorization needs to be sought on a country-by-country basis in order for the company to market their products. Some countries have adopted medical device regulatory regimes, such as the Classification Rules for Medical Devices published by the Hong Kong Department of Health, the Health Sciences Authority of Singapore regulation of medical devices under the Health Products Act, and Health Canada’s risk classification system for invasive devices, among others. Each country may have its own processes and requirements for medical device licensing, approval/clearance, and regulation, therefore requiring the company to seek marketing authorizations on a country-by-country basis.

In addition, as previously noted, the United Kingdom left the European Union on January 31, 2020, with a transitional period that expired on December 31, 2020. The United Kingdom and the European Union entered into a trade agreement known as the Trade and Cooperation Agreement (“TCA”), which came into effect on January 1, 2021. The TCA does not specifically refer to medical devices. However, as a result of Brexit, the Medical Device Regulation will not be implemented in the UK, and previous legislation that mirrored the Medical Device Regulation in the UK law has been revoked. The regulatory regime

37

for medical devices in the UK will continue to be based on the requirements derived from EU legislation as of January 21, 2020, and the UK may choose to retain regulatory flexibility or align with the Medical Device Regulation going forward. CE markings will continue to be recognized in the UK, and certificates issued by EU recognized Notified Bodies will be valid in the UK, until June 30, 2023. For medical devices placed on the UK market after this period, the UK Conformity Assessment (“UKCA”) marking will be mandatory. In contrast, UKCA marking and certificates issued by UK Notified Bodies will not be recognized on the EU market. The TCA does provide for cooperation and exchange of information in the area of product safety and compliance, including market surveillance, enforcement activities and measures, standardization related activities, exchanges of officials, and coordinated product recalls (or other similar actions). Depending on which countries products will ultimately be sold in, manufacturers may start seeking alternative sources for components if this would allow them to benefit from no tariffs. The rules for placing medical devices on the Northern Ireland market will differ from those in the UK.

In addition, outside the United States, a range of anti-bribery and anti-corruption laws, as well as some industry-specific laws and codes of conduct, apply to the medical device industry and interactions with government officials and entities and healthcare professionals. Such laws include, but are not limited to the UK Bribery Act of 2010. Further, the European Union member countries have emphasized a greater focus on healthcare fraud and abuse and have indicated greater attention to the industry by the European Anti-Fraud Office. Countries in Asia have also become more active in their enforcement of anti-bribery laws and with respect to procurement and supply chain fraud.

Corporate Information

HealthCor was incorporated as a Cayman Islands exempted company on November 18, 2020 for the purpose of effecting a merger, share exchange, asset acquisition, share purchase, reorganization or other similar business combination with one or more businesses. Legacy Hyperfine was incorporated under the laws of the State of Delaware on February 25, 2014 under the name “Hyperfine Research, Inc.” On May 25, 2021, the name of Legacy Hyperfine was changed to “Hyperfine, Inc.” Liminal was incorporated under the laws of the State of Delaware on September 21, 2018 under the name “EpilepsyCo Inc.” On July 20, 2020, the name of Liminal was changed to “Liminal Sciences, Inc.” On December 21, 2021, HealthCor changed its jurisdiction of incorporation from the Cayman Islands to the State of Delaware by deregistering as an exempted company in the Cayman Islands and continuing and domesticating as a corporation, incorporated under the laws of the State of Delaware. On December 22, 2021, HealthCor, Legacy Hyperfine and Liminal completed the Business Combination, pursuant to which each of Legacy Hyperfine and Liminal became a wholly owned subsidiary of HealthCor, HealthCor’s corporate name was changed to Hyperfine, Inc., Legacy Hyperfine’s corporate name was changed to Hyperfine Operations, Inc., Liminal’s corporate name was changed to Liminal Operations, Inc. (which was subsequently changed to Liminal Sciences, Inc.), and the business of Legacy Hyperfine and Liminal became the business of the Company. Our principal executive offices are located at 351 New Whitfield Street, Guilford, Connecticut 06437, and our telephone number is (203) 458-7100.

Information Available on the Internet

Our internet address is https://hyperfine.io, to which we regularly post copies of our press releases as well as additional information about us. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports, will be available to you free of charge through the Investors section of our website as soon as reasonably practicable after such materials have been electronically filed with, or furnished to, the Securities and Exchange Commission (the “SEC”). The SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. We include our web site address in this report only as an inactive textual reference. Information contained in our website does not constitute a part of this report or our other filings with the SEC.

38

Item 1A. RISK FACTORS

Except for the historical information contained herein, this report contains forward-looking statements that involve risks and uncertainties. These statements include projections about our finances, plans and objectives for the future, future operating and economic performance and other statements regarding future performance. These statements are not guarantees of future performance or events. Our actual results could differ materially from those discussed in this report. Factors that could cause or contribute to these differences include, but are not limited to, those discussed in the following section, as well as those discussed in Part II, Item 7 entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and elsewhere throughout this report.

You should consider carefully the following risk factors, together with all of the other information included in this report. If any of the following risks, either alone or taken together, or other risks not presently known to us or that we currently believe to not be significant, develop into actual events, then our business, financial condition, results of operations or prospects could be materially adversely affected. If that happens, the market price of our common stock could decline, and stockholders may lose all or part of their investment.

Unless the context otherwise requires, references in this section to “we,” “us,” “our” and the “Company” refer to Hyperfine, Inc. and its subsidiaries following the Business Combination, or to Legacy Hyperfine, Liminal, or HealthCor prior to the Business Combination, as the case may be.

Risks Related to Our Financial Condition and Capital Requirements

We are an early-stage life sciences technology company with a history of net losses, which we expect to continue, and we may not be able to generate meaningful revenues or achieve and sustain profitability in the future.

We are an early-stage life sciences technology company, and have incurred significant losses since Legacy Hyperfine and Liminal formed in 2014 and 2018, respectively, and expect to continue to incur losses in the future. We incurred net losses of $64.9 million and $23.4 million for the years ended December 31, 2021 and 2020, respectively. As of December 31, 2021, we had an accumulated deficit of $136.3 million. These losses and accumulated deficit were primarily due to the substantial investments made to develop and improve our technology and products. Over the next several years, we expect to continue to devote substantially all of our resources towards continuing development and commercialization of our products and research and development efforts for additional products. These efforts may prove more costly than we currently anticipate. We have just begun generating product revenue but may never generate revenue sufficient to offset our expenses, or at all. In addition, as a public company, we will incur significant legal, accounting, administrative, insurance and other expenses that we did not incur as a private company. Accordingly, we cannot assure you that we will achieve profitability in the future or that, if we become profitable, will sustain profitability.

We have a limited operating history, which may make it difficult to evaluate the prospects for our future viability and predict our future performance. As such, you cannot rely upon our historical operating performance to make an investment or voting decision regarding us.

We have generated limited revenue from the sale of our products and services to date and have incurred significant losses. Our prospects must be considered in light of the uncertainties, risks, expenses, and difficulties frequently encountered by companies in their early stages of operations. We have not yet achieved wide market acceptance for our products, produced our products at scale, refined our sales model, or conducted at scale sales and marketing activities necessary for successful mass product adoption. Consequently, predictions about our future success or viability are highly uncertain and may not be as accurate as they could be if we had a longer operating history or a company history of successfully developing and commercializing products.

In addition, as a business with a limited operating history, we may encounter unforeseen expenses, difficulties, complications, delays and other known and unknown obstacles. We will need to transition from a company in the early commercialization stage to large scale commercialization, and we may not be successful in such a transition. We have encountered in the past, and will encounter in the future, risks and uncertainties frequently experienced by growing companies with limited operating histories in emerging and rapidly changing industries. If our assumptions regarding these risks and uncertainties, which we will use to plan and operate our business, are incorrect or change, or if we do not address these risks successfully, our results of operations could differ materially from our expectations, and our business, financial condition and results of operations could be adversely affected.

39

We may need to raise additional capital to fund commercialization plans for our products, including manufacturing, sales and marketing activities, expand our investments in research and development, and commercialize new products and applications.

Our operations have consumed substantial amounts of cash since inception. We expect to use the funds received in connection with the Business Combination to develop and further commercialize our products, develop new products, and for working capital and general corporate purposes. We may require additional capital to further develop and commercialize our products and to develop new products. In addition, our operating plans may change as a result of many factors that may currently be unknown to us, and we may need to seek additional funds sooner than planned.

We cannot guarantee that future financing will be available in sufficient amounts or on terms acceptable to us, if at all. Moreover, the terms of any future financing may adversely affect the holdings or the rights of our stockholders and the issuance of additional securities, whether equity or debt, by us, or the possibility of such issuance, may cause the market price of our Class A common stock to decline. The incurrence of indebtedness could result in increased fixed payment obligations, and we may be required to agree to certain restrictive covenants, such as limitations on our ability to incur additional debt, limitations on our ability to acquire, sell or license intellectual property rights and other operating restrictions that could adversely impact our ability to conduct our business. We could also be required to seek funds through arrangements with collaborative partners or otherwise at an earlier stage than otherwise would be desirable, and we may be required to relinquish rights to some of our technologies or products or otherwise agree to terms that are unfavorable to us, any of which may have a material adverse effect on our business, operating results and prospects. In addition, raising additional capital through the issuance of equity or convertible debt securities would cause dilution to holders of our equity securities, and may affect the rights of then-existing holders of our equity securities. Even if we believe that we have sufficient funds for our current or future operating plans, we may seek additional capital if market conditions are favorable or if we have specific strategic considerations.

Our operating results may fluctuate significantly in the future, which makes our future operating results difficult to predict and could cause our operating results to fall below expectations or any guidance we may provide.

Our quarterly and annual operating results may fluctuate significantly, which makes it difficult for us to predict our future operating results. These fluctuations may occur due to a variety of factors, many of which are outside our control, including, but not limited to:

40

The cumulative effects of the factors discussed above could result in large fluctuations and unpredictability in our quarterly and annual operating results. As a result, comparing our operating results on a period-to-period basis may not be meaningful.

This variability and unpredictability could also result in us failing to meet the expectations of industry or financial analysts or investors for any period. If we are unable to further commercialize products or generate revenue, or if our operating results fall below the expectations of analysts or investors or below any guidance we may provide, or if the guidance we provide is below the expectations of analysts or investors, the market price of our Class A common stock could decline.

Risks Related to Our Businesses

Our success depends upon market acceptance of our products and services, our ability to develop and commercialize existing and new products and services and generate revenues, and our ability to identify new markets for our technology.

We have developed, and are engaged in the development of, MRI solutions and non-invasive neural monitoring technology. We are commercializing our Swoop® Portable MRI System™ to address limitations of current imaging technologies. Other product candidates, such as our non-invasive brain vital sensors, are currently under development. Our success will depend on the acceptance of our products and services in the U.S. and international healthcare markets. The marketplace may not be receptive to our products and services over competing products, including conventional MRI systems used in hospitals, imaging centers and physicians’ offices, and we may be unable to compete effectively. Factors that could affect our ability to successfully further commercialize our current products and services and to commercialize any potential future products and services include:

We cannot assure investors that our current products and services or any future products and services will gain broad market acceptance. If the market for our current products and services or any future products and services fails to develop or develops more slowly than expected, or if any of our products or services do not achieve or sustain market acceptance, our business and operating results would be materially and adversely affected.

Medical device development is costly and involves continual technological change, which may render our current or future products obsolete.

The market for point-of-care medical devices is characterized by rapid technological change, medical advances and evolving industry standards. Any one of these factors could reduce the demand for our devices or services or require substantial resources and expenditures for research, design and development to avoid technological or market obsolescence.

Our success will depend on our ability to enhance our current technology, products and services and develop or acquire and market new technologies to keep pace with technological developments and evolving industry standards, while responding to changes in customer needs. A failure to adequately develop or acquire device enhancements or new devices that will address changing technologies and customer requirements adequately, or to introduce such devices on a timely basis, may have a material adverse effect on our business, financial condition and results of operations.

We might have insufficient financial resources to improve existing devices, advance technologies and develop new devices at competitive prices. Technological advances by one or more competitors or future entrants into the field may result in our current devices becoming non-competitive or obsolete, which may decrease revenues and profits and adversely affect our business and results of operations.

41

We may encounter significant competition across our existing and future planned products and services and in each market in which we sell or plan to sell our products and services from various companies, many of which have greater financial and marketing resources than us. Our primary competitors include several large companies which currently dominate the medical imaging market, including General Electric, Siemens, Philips, Hologic, Varian, Fuji, Toshiba, Canon and Hitachi.

In addition, our competitors, some of which are well-established manufacturers with significant resources, may engage in aggressive marketing tactics. Competitors may also possess the ability to commercialize additional lines of products, bundle products or offer higher discounts and incentives to customers in order to gain a competitive advantage. If the prices of competing products are lowered as a result, we may not be able to compete effectively.

We will be dependent upon the success of our sales and customer acquisition and retention strategies.

Our business is dependent upon the success of our sales and customer acquisition and retention strategies, and our marketing efforts are focused on developing a strong reputation with healthcare providers and increasing awareness of our products and services. If we fail to maintain a high quality of service or a high quality of device technology, we may fail to retain existing users or add new users. If we do not successfully continue our sales efforts and promotional activities, particularly to health systems and large institutions, or if existing users decrease their level of engagement, our revenue, financial results and business may be significantly harmed. Our future success depends upon continued expansion of our commercial operations in the United States and internationally, as well as entering additional markets to commercialize our products and services. We believe that our growth will depend on the further development and commercialization of our current products and services and regulatory authorization for our future products and services. If we fail to expand the use of our products and services in a timely manner, we may not be able to expand our market share or to grow our revenue. Our financial performance will be substantially dictated by our success in adding, retaining and engaging active users of our products. If customers do not perceive our products or services to be useful, reliable and trustworthy, we may not be able to attract or retain customers or otherwise maintain or increase the frequency and duration of their engagement. As our business model is predicated on device hardware sales, software subscriptions, and subscriptions for use of device hardware and software, there is risk that any decline in sales, subscriptions and subscription renewal rates will adversely impact our business. A decrease in customer retention, growth or engagement with our products and services may have a material and adverse impact on our revenue, business, financial condition and results of operations.

Any number of factors could negatively affect customer retention, growth and engagement, including:

If we do not successfully manage the commercialization of our products and services, including continuing to build our sales force, and the development and launch of new products and services, we will not meet the long term forecasts and our business, operating and financial results and condition could be adversely affected.

We face risks associated with commercializing existing products and services and launching new products and services. If we encounter commercialization, development or manufacturing challenges or discovers errors during our product development cycle, the product launch dates of new products may be delayed, which will cause delays in our ability to achieve our forecasted results. The expenses or losses associated with unsuccessful product development or launch activities or lack of market acceptance of our products and services could adversely affect our business or financial condition.

42

We expect to generate an increasing portion of our revenue internationally in the future and may become subject to various additional risks relating to our international activities, which could adversely affect our business, operating results and financial condition.

We believe that a substantial percentage of our future revenue will come from international sources as we seek regulatory authorization for our products beyond the United States and expands our sales and marketing opportunities internationally. Our success will depend, in part, upon our ability to succeed in differing legal, regulatory, economic, social and political conditions by developing, implementing and maintaining policies and strategies that are effective in each location where we do business. We have limited experience operating internationally and engaging in international business involves a number of difficulties and risks, including:

For example, our business may be impacted by the conflict in Ukraine, any economic or other sanctions imposed on Russia and others for aggression in Ukraine, and any economic or other countermeasures by affected countries. Any such conflict may also impact our ability to secure raw materials and finished products and create supply chain disruptions. For example, one key custom-made component in our Swoop scanner is the magnet, which is manufactured by a single source supplier in Europe. In the event of interruption from any of our suppliers or manufacturers, we may not be able to obtain capacity from other sources or develop alternate or secondary sources without incurring material additional costs and substantial delays. As we seek to expand into international markets, the conflict in Ukraine and any related economic or other sanctions or related countermeasures could limit our ability to expand our business and have a material adverse impact on demand for our products and sales in affected markets. In addition, sanctions imposed on Russia and others in response to such conflict may also adversely impact the financial markets and the global economy, and any economic countermeasures by Russia and others could exacerbate market and economic instability.

If we dedicate significant resources to our international operations and are unable to manage these risks effectively, our business, operating results and financial condition may be adversely affected.

We are subject to export and import control laws and regulations that could impair our ability to compete in international markets or subject us to liability if we violate such laws and regulations.

We are required to comply with export and import control laws, which may affect our ability to enter into or complete transactions with certain customers, business partners, and other persons. In certain circumstances, export control regulations may prohibit the export of certain products, services, and technologies. We may be required to obtain an export license before exporting a controlled item, and granting of a required license cannot be assured. Compliance with the import laws that apply

43

to our businesses may restrict our access to, and may increase the cost of obtaining, certain products and could interrupt our supply of imported inventory.

Exported technologies necessary to develop and manufacture certain products are subject to U.S. export control laws and similar laws of other jurisdictions. We may be subject to adverse regulatory consequences, including government oversight of facilities and export transactions, monetary penalties, and other sanctions for violations of these laws. In certain instances, these regulations may prohibit us from developing or manufacturing certain of our products for specific applications outside the United States. Failure to comply with any of these laws and regulations could result in civil and criminal, monetary, and nonmonetary penalties; disruptions to our business; limitations on our ability to import and export products and services; or damage to our reputation.

If we experience decreasing prices for our products and are unable to reduce our expenses, including the per unit cost of producing our products, there may be a material adverse effect on our business, results of operations, financial condition and cash flows.

We may experience decreasing prices for our products due to pricing pressure from managed care organizations and other third-party payors and suppliers, increased market power of our payors as the medical device industry consolidates, and increased competition among suppliers, including manufacturing services providers. If the prices for our products and services decrease and we are unable to reduce our expenses, including the cost of sourcing materials, logistics and the cost to manufacture our products, our business, results of operations, financial condition and cash flows may be adversely affected. To the extent that we engage in enterprise sales, we may be subject to procurement discounts, which could have a negative impact on the prices of our products.

If we are unable to attract, recruit, train, retain, motivate and integrate key personnel as we expand our organization, our operations may be disrupted and we may not achieve our goals.

Our future success depends on our ability to attract, recruit, train, retain, motivate and integrate key personnel, including our Vice Chairman and the Founder of Legacy Hyperfine and Liminal, Dr. Jonathan Rothberg, our Executive Chairman, Scott Huennekens, and our President and Chief Executive Officer, Dave Scott, as well as our recently expanded management team and our research and development, manufacturing, software engineering and sales and marketing personnel. As our development and commercialization plans and strategies develop, we will need additional managerial, operational, sales, marketing, financial, legal and other resources. Competition for qualified personnel in the medical device industry is intense. Due to this intense competition, we may be unable to attract and retain the qualified personnel necessary for the development of our business or to recruit suitable replacement personnel.

We believe that our management team must be able to act decisively to apply and adapt our business model in the rapidly changing markets in which we compete. In addition, we rely upon technical and scientific employees or third-party contractors to effectively establish, manage and grow our business. Consequently, we believe that our future viability will depend largely on our ability to attract and retain highly skilled managerial, sales, scientific and technical personnel. In order to do so, we may need to pay higher compensation or fees to our employees or consultants than we currently expect, and such higher compensation payments may have a negative effect on our operating results. Competition for experienced, high-quality personnel is intense, and we cannot assure investors that we will be able to recruit and retain such personnel. Our growth depends, in particular, on attracting and retaining highly-trained sales personnel with the necessary technical background and ability to understand our products and services at a technical level to effectively identify and sell to potential new customers and develop new products. Because of the technical nature of our products and the dynamic market in which we compete, any failure to attract, recruit, train, retain, motivate and integrate qualified personnel could materially harm our operating results and growth prospects.

Our management may need to divert a disproportionate amount of our attention away from our day-to-day activities and devote a substantial amount of time to managing these growth activities. We may not be able to effectively manage the expansion of our operations, which may result in weaknesses in our infrastructure, operational mistakes, loss of business opportunities, loss of employees and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of additional products. If our management is unable to effectively manage our growth, our expenses may increase more than expected, our ability to generate and/or grow revenue could be reduced and we may not be able to implement our business strategy. Our future financial performance and our ability to commercialize products and services and compete effectively will depend, in part, on our ability to effectively manage any future growth.

44

We have limited experience in marketing and selling our products and related services, and if we are unable to successfully commercialize our products and related services, our business and operating results will be adversely affected.

We have limited experience marketing and selling our products and related services. We began selling our Swoop MRI scanner in 2020 and currently sell the device directly to customers through direct sales. Future sales of our products will depend in large part on our ability to effectively market and sell our products and services, successfully manage and expand our sales force, and increase the scope of our marketing efforts. We may also enter into distribution arrangements in the future. Because we have limited experience in marketing and selling our products, our ability to forecast demand, the infrastructure required to support such demand and the sales cycle to customers is unproven. If we do not build an efficient and effective marketing and sales force, our business and operating results will be adversely affected.

We rely on a single contract manufacturer, Benchmark Electronics, Inc. (“Benchmark”), to test, assemble and supply our finished products. If Benchmark fails to fulfill its obligations under its existing contractual arrangements with us or does not perform satisfactorily, our ability to source our devices could be negatively and adversely affected.

In October 2018, Legacy Hyperfine entered into a Manufacture and Supply Agreement with Benchmark (the “MSA”). Under the MSA, Benchmark agreed to manufacture our products pursuant to binding purchase orders. The parties have agreed to meet periodically regarding any minimum order quantities of components under the MSA. We also have certain inventory related obligations, including the obligation to purchase excess and obsolete components from Benchmark. See “Item 1. Business - Key Agreements - Manufacture and Supply Agreement with Benchmark Electronics, Inc.”

In the event it becomes necessary to utilize a different contract manufacturer for our component products, we would experience additional costs, delays and difficulties in obtaining such components as a result of identifying and entering into an agreement with a new contract manufacturer as well as preparing such new manufacturer to meet the logistical requirements associated with manufacturing our devices, and our business would suffer.

We rely on a limited number of suppliers for our products. A loss of any of these suppliers could negatively affect our business.

We rely on a limited number of suppliers to manufacture components for our products, including in some cases only a single supplier for some of our components. One key custom-made component in our Swoop scanner is the magnet, which is manufactured by a single source supplier in Europe. Our reliance on a limited number of suppliers increases our risks, since we do not currently have alternative or replacement suppliers beyond these key parties. In the event of interruption from any of our suppliers, we may not be able to increase capacity from other sources or develop alternate or secondary sources without incurring material additional costs and substantial delays.

If we experience a significant increase in demand for our products, or if we need to replace an existing supplier or manufacturer, we may be unable to supplement or replace them on terms that are acceptable to us, which may undermine our ability to deliver our products to customers in a timely manner. Identifying suitable suppliers and manufacturers is an extensive process that requires us to become satisfied with their quality control, technical capabilities, responsiveness and service, financial stability, regulatory compliance, and labor and other ethical practices. Accordingly, a loss of any of our suppliers or our device manufacturer could have an adverse effect on our business, financial condition and operating results.

Pricing pressures from contract suppliers or manufacturers on which we rely may impose pricing pressures.

Third party suppliers utilized by our manufacturer such as Benchmark Electronics, Inc. may also impose pricing pressures. Because we currently also rely on Benchmark Electronics, Inc. to manufacture, test and ship all of the Swoop scanners and on a limited number of suppliers to supply our components, including a single source supplier of the magnet used in the scanner, such pricing pressures from a third party such as Benchmark Electronics, Inc. could increase our costs and could force us to increase the prices of our products if we are unable to enter into alternative arrangements with other suppliers or manufacturers, potentially leading to decreased customer demand.

If we do not successfully optimize and operate our sales and potential future distribution channels or we do not effectively expand and update our infrastructure, our operating results and customer experience may be negatively impacted.

If we do not adequately predict market demand or otherwise optimize and operate our sales and potential future distribution channels successfully, it could result in excess or insufficient inventory or fulfillment capacity, increased costs, or immediate shortages in product or component supply, or harm our business in other ways. In addition, if we do not maintain adequate

45

infrastructure to enable us to, among other things, manage our purchasing and inventory, it could negatively impact our operating results and customer experience.

The market for our products and services is new, rapidly evolving, and increasingly competitive, as the healthcare industry in the United States is undergoing significant structural change, which makes it difficult to forecast demand for our products and services.

The market for our products and services is new and rapidly evolving, and it is uncertain whether we will achieve and sustain high levels of demand and market adoption. Our future financial performance will depend in part on growth in this market and on our ability to adapt to the changing demands of customers. It is difficult to predict the future growth rate and size of our target market. As a result, our commercial expectations may not be achieved. Negative publicity concerning our products could limit market acceptance of our products and services. If our customers do not perceive the benefits of our products and services, or if our products and services do not attract new customers, then our market may not develop at all, or we may develop more slowly than we expect. Our success will depend to a substantial extent on the willingness of healthcare organizations to increase their use of our technology and our ability to demonstrate the value of our technology relative to competing products and services to existing and potential customers. If healthcare organizations do not recognize or acknowledge the benefits of our products and services or if we are unable to reduce healthcare costs or drive positive health outcomes, then the market for our solutions might not develop at all, or might develop more slowly than we expect. Similarly, negative publicity regarding patient confidentiality and privacy in the context of technology-enabled healthcare or concerns experienced by competitors could limit market acceptance of our products and services.

The healthcare industry in the United States is undergoing significant structural change and is rapidly evolving. Our products and services are offered on a subscription basis, and the adoption of subscription business models is still relatively new, especially in the healthcare industry. If companies do not shift to subscription business models and subscription health management tools do not achieve widespread adoption, or if there is a reduction in demand for subscription products and services or subscription health management tools, our business, financial condition, and results of operations could be adversely affected.

Quality problems could lead to recalls or safety alerts and/or reputational harm and could have a material adverse effect on our business, results of operations, financial condition and cash flows.

Quality of our products is very important to us and our customers due to the serious and costly consequences of product failure. Our business exposes us to potential product liability risks that are inherent in the design, manufacture, and marketing of medical devices. Product or component failures, manufacturing nonconformities, design defects, off-label use, or inadequate disclosure of product-related risks or product-related information with respect to our products, if they were to occur, could result in inaccurate imaging and safety risks. These problems could lead to the recall of, or the issuance of a safety alert relating to, our products, and could result in product liability claims and lawsuits.

Additionally, the manufacture and production of our products must occur in a highly controlled and clean environment to minimize particles and other yield- and quality-limiting contaminants. Weaknesses in process control or minute impurities in materials may cause defective products. If we are not able to maintain stringent quality controls, or if contamination problems arise, our development and commercialization efforts could be delayed, which would harm our business and results of operations.

If we fail to meet any applicable product quality standards and our products are the subject of recalls or safety alerts, our reputation could be damaged, we could lose customers, and our revenue and results of operations could decline.

If we are not able to develop and release new products and services, or successful enhancements, new features and modifications to our existing products and services, to successfully implement our software subscription solutions or to achieve adequate clinical utility, our business, financial condition and results of operations could be adversely affected.

The markets in which we operate are characterized by rapid technological change, frequent new product and service introductions and enhancements, changing customer demands, and evolving industry standards. The introduction of products and services embodying new technologies can quickly make existing products and services, including software subscriptions, obsolete and unmarketable. Additionally, changes in laws and regulations could impact the usefulness of our products and could necessitate changes or modifications to our products to accommodate such changes. We invest substantial resources in researching and developing new products and enhancing existing products by incorporating additional features, improving functionality, and adding other improvements to meet customers’ evolving needs. The success of any enhancements or improvements to our existing products or any new products depends on several factors, including timely completion, competitive pricing, adequate quality testing, integration with new and existing technologies and third-party partners’

46

technologies and overall market acceptance. We may not succeed in developing, marketing and delivering on a timely and cost-effective basis enhancements or improvements to our existing products or any new products that respond to continued changes in market demands or new customer requirements, and any enhancements or improvements to our products or any new solutions may not achieve market acceptance. Since developing our products is complex, the timetable for the release of new products and enhancements to existing products is difficult to predict, and we may not offer new products and updates as rapidly as our customers require or expect. Any new products that we develop may not be introduced in a timely or cost-effective manner, may contain errors or defects, or may not achieve the broad market acceptance necessary to generate sufficient revenue. Moreover, even if we introduce new products, we may experience a decline in revenue from our existing products that is not offset by revenue from the new products. For example, customers may delay making purchases of new products to permit them to make a more thorough evaluation of these products or until industry and marketplace reviews become widely available. Customers may also delay purchasing a new product because their existing product or other device continues to meet their needs. Some customers may hesitate to migrate to a new product due to concerns regarding the performance of the new product. In addition, we may lose existing customers who choose a competitor’s products and services. This could result in a temporary or permanent revenue shortfall and adversely affect our business, financial condition and results of operations.

The introduction of new products and solutions by competitors, the development of entirely new technologies to replace existing offerings or shifts in healthcare benefits trends could make our products obsolete or adversely affect our business, financial condition and results of operations. We may experience difficulties with software development, industry standards, design or marketing that could delay or prevent our development, introduction or implementation of new products, enhancements, additional features or capabilities. If customers do not widely purchase and adopt our products, we may not be able to realize a return on our investment. If we do not accurately anticipate customer demand or if we are unable to develop, license or acquire new features and capabilities on a timely and cost-effective basis, or if such enhancements do not achieve market acceptance, it could result in adverse publicity, loss of revenue or market acceptance or claims by customers brought against us, each of which could have a material and adverse effect on our reputation, business, results of operations and financial condition.

We are party to Technology and Services Exchange Agreements with certain affiliated companies, pursuant to which the parties agreed to share personnel and certain non-core technologies. The sharing arrangements under the agreements may prevent us from fully utilizing our personnel and/or the technologies shared under the agreements. Furthermore, if these agreements were to terminate, or if we were to lose access to these technologies and services, our business could be adversely affected.

We entered into Technology and Services Exchange Agreements (each, a “TSEA” and collectively, the “TSEA”) with other participant companies controlled by the Rothbergs. A TSEA by and among Butterfly Network, Inc., AI Therapeutics, Inc., Quantum-Si Incorporated, 4Bionics, Tesseract Health, Inc., Detect, Inc. (f/k/a Homodeus Inc.), Legacy Hyperfine and Liminal was signed in November 2020; a TSEA by and among Quantum-Si Incorporated, AI Therapeutics, Inc., 4Bionics, Tesseract Health, Inc., Detect, Inc., Legacy Hyperfine and Liminal was signed in February 2021 (and which Protein Evolution, Inc. joined in August 2021); and a TSEA by and among Legacy Hyperfine, Liminal, AI Therapeutics, Inc., Tesseract Health, Inc. and Detect, Inc. was signed in July 2021 and became effective upon the Closing. Under the TSEA, we and the other participant companies may, in their discretion, permit the use of certain non-core technologies, which include any technologies, information or equipment owned or otherwise controlled by the participant company that are not specifically related to the core business area of the participant, such as software, hardware, electronics, fabrication and supplier information, vendor lists and contractor lists, with the other participant companies. The TSEA provides that ownership of each non-core technology shared by us or another participant company will remain with the company that originally shared the non-core technology. In addition, any participant company (including us) may, in its discretion, permit its personnel to be engaged by another participant company to perform professional, technical or consulting services for such participant. Unless otherwise agreed to by us and the other participant company, all rights, title and interest in and to any inventions, works-of-authorship, idea, data or know-how invented, made, created or developed by the personnel (employees, contractors or consultants) in the course of conducting services for a participant company (“Created IP”) will be owned by the participant company for which the work was performed, and the recipient participant company grants to the party that had its personnel provide the services that resulted in the creation of the Created IP a royalty-free, perpetual, limited, worldwide, non-exclusive, sub-licensable (and with respect to software, sub-licensable in object code only) license to utilize the Created IP only in the core business field of the originating participant company, including a license to create and use derivative works based on the Created IP in the originating participant’s core business field, subject to any agreed upon restrictions.

The technology and personnel-sharing arrangements under the TSEA may prevent us from fully utilizing our personnel if such personnel are also being used by the other participant companies and may also cause our personnel to enter into agreements with or provide services to other companies that interfere with their obligations to us. Created IP under the TSEA

47

may be relevant to our business and created by our personnel but owned by the other participant companies. Furthermore, if the TSEA were to terminate, or if we were to lose access to the technologies and services available pursuant to the TSEA, our business could be adversely affected.

We may acquire other companies or technologies, which could fail to result in a commercial product or net sales, divert our management’s attention, result in additional dilution to our stockholders and otherwise disrupt our operations and harm our operating results.

We may in the future seek to acquire or invest in businesses, applications or technologies that we believe could complement or expand our portfolio, enhance our technical capabilities or otherwise offer growth opportunities. However, we cannot assure you that we would be able to successfully complete any acquisition we choose to pursue, or that we would be able to successfully integrate any acquired business, product or technology in a cost-effective and non-disruptive manner. The pursuit of potential acquisitions may divert the attention of management and cause us to incur various costs and expenses in identifying, investigating and pursuing suitable acquisitions, whether or not they are consummated. We may not be able to identify desirable acquisition targets or be successful in entering into an agreement with any particular target or obtain the expected benefits of any acquisition or investment.

To date, the growth of our operations has been largely organic, and we have limited experience in acquiring other businesses or technologies. We may not be able to successfully integrate any acquired personnel, operations and technologies, or effectively manage the combined business following an acquisition. Acquisitions could also result in dilutive issuances of equity securities, the use of our available cash, or the incurrence of debt, which could harm our operating results. In addition, if an acquired business fails to meet our expectations, our operating results, business and financial condition may suffer.

As international expansion of our business occurs, it will expose us to market, regulatory, political, operational, financial and economic risks associated with doing business outside of the United States.

Our long-term strategy is to increase our international presence, including securing the necessary regulatory authorizations in the United Kingdom and Australia. We recently received regulatory authorization in Canada, New Zealand and Pakistan. This strategy may include establishing and maintaining physician outreach and education capabilities outside of the United States and expanding our relationships with international customers. Doing business internationally involves a number of risks, including:

48

Any of these factors could significantly harm our future international expansion and operations and, consequently, have a material adverse effect on our business, financial condition and results of operations.

The COVID-19 pandemic has and could continue to negatively affect various aspects of our business, make it more difficult for us to meet our obligations to our customers, and result in reduced demand for our products and services, which could have a material adverse effect on our business, financial condition, results of operations, or cash flows.

In December 2019, a novel strain of coronavirus was reported to have surfaced in Wuhan, China, and it has since spread throughout other parts of the world, including the United States. Any outbreak of contagious diseases, or other adverse public health developments, could have a material adverse effect on our business operations. These impacts to our operations have included, and could again in the future include disruptions or restrictions on the ability of our employees’ and customers’ to travel or of us to pursue collaborations and other business transactions, travel to customers and/or conduct live demonstrations of our products at promotional events, oversee the activities of our third-party manufacturers and suppliers and make shipments of materials. We may also be impacted by the temporary closure of the facilities of suppliers, manufacturers or customers. In addition, many hospitals and other healthcare providers continue to focus their attention on addressing COVID-19, which we believe has resulted in lower sales volume. The COVID-19 pandemic may also continue to have an impact on customers, as elective healthcare visits and procedures have been postponed and there is greater focus on areas of care with lower profitability, leading, as a consequence, to lower expenditures on new products and devices by healthcare institutions.

In an effort to halt the outbreak of COVID-19, a number of countries, including the United States, have placed significant restrictions on travel and many businesses have announced extended closures. These travel restrictions and business closures have and may in the future adversely impact our operations locally and worldwide, including our ability to manufacture, market, sell or distribute our products, and such restrictions and closure have caused or may cause temporary closures of facilities of suppliers, manufacturers or customers. During the COVID-19 pandemic, our suppliers agreed to shift new work to domestic suppliers to help reduce the risk of manufacturing delays. Our supplier and sub tier suppliers have been adversely affected by COVID-19. Any disruption in the operations of our employees, suppliers, customers, manufacturers or access to customers would likely impact our sales and operating results. In addition, travel restrictions have made it more difficult for us to monitor the quality of our third party manufacturing operations when we are unable to conduct in-person quality audits of those facilities. We have also experienced increases in product costs as raw materials have been constrained. Prices have risen sharply over the past year, and lead times have extended dramatically, particularly on semiconductor products. Over the next 12 months, we expect prices to increase due to the raw material demand surges across numerous industries, along with labor and transportation related constraints. We also expect lead times to reduce as component production levels recover to meet demand. In addition, future regulatory authorizations by the FDA may take longer because of COVID-19 pandemic-related delays. We are continuing to monitor and assess the effects of the COVID-19 pandemic on our commercial operations. However, we cannot at this time accurately predict what effects these conditions will ultimately have on our operations due to uncertainties relating to variants such as Omicron, the severity of the disease, the duration of the outbreak, and the length of the travel restrictions and business closures imposed by the governments of impacted countries. In addition, the COVID-19 pandemic could continue to adversely affect the economies and financial markets of many countries, which could result in an economic downturn that could affect demand for our products and likely impact our operating results.

Unfavorable global economic conditions could adversely affect our business, financial condition or results of operations.

Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets, including changes in inflation, interest rates and overall economic conditions and uncertainties. For instance, if inflation or other factors were to significantly increase our business costs, it may not be feasible to pass price increases on to our customers. Inflation could also adversely affect the ability of our customers to purchase our products. An economic downturn, including as a result of COVID-19, could result in a variety of risks to our business, including weakened demand for our products and our inability to raise additional capital when needed on acceptable terms, if at all. A weak or declining economy could also strain our manufacturers and suppliers, possibly resulting in supply disruption, or cause future customers

49

to delay making payments for our products. Any of the foregoing could harm our business and we cannot anticipate all of the ways in which the current economic climate and financial market conditions could adversely impact our business.

The enactment of legislation implementing changes in the U.S. Taxation of international business activities, the adoption of other tax reform policies or changes in tax legislation or policies in jurisdictions outside of the United States could materially impact our results of operations and financial condition.

We are subject to income tax in the numerous jurisdictions in which we operate. Reforming the taxation of international businesses has been a priority for politicians, and a wide variety of potential changes have been proposed. Some proposals, several of which have been enacted, impose incremental taxes on gross revenue, regardless of profitability. Furthermore, it is reasonable to expect that global taxing authorities will be reviewing current legislation for potential modifications in reaction to the implementation of the 2017 Tax Cuts and Jobs Act (the “Tax Act”) in the United States. Due to the expanding scale of our international business activities, changes in the taxation of such activities may increase our worldwide effective tax rate and the amount of taxes we pay and harm our business.

In the United States, the Tax Act enacted on December 22, 2017 significantly affected U.S. Tax law by changing how the United States imposes income tax on multinational corporations. The U.S. Department of Treasury has broad authority to issue regulations and interpretative guidance that may significantly impact how we will apply the law and impact our results of operations in the period issued.

The Tax Act requires complex computations not previously provided in U.S. Tax law. As such, the application of accounting guidance for such items remains uncertain. Further, compliance with the Tax Act and the accounting for such provisions requires an accumulation of information not previously required or regularly produced. As additional regulatory guidance is issued by the applicable taxing authorities, as accounting treatment is clarified, and as we perform additional analysis on the application of the law, our effective tax rate could be materially different.

U.S. Taxation of international business activities or the adoption of tax reform policies could materially impact our future financial position and results of operations.

Limitations on the ability of taxpayers to claim and utilize foreign tax credits and the deferral of certain tax deductions until earnings outside of the United States are repatriated to the United States, as well as changes to U.S. Tax laws that may be enacted in the future, could impact the tax treatment of future foreign earnings. Should the scale of our international business activities expand, any changes in the U.S. Taxation of such activities could increase our worldwide effective tax rate and harm our future financial position and results of operations.

We may face exposure to foreign currency exchange rate fluctuations.

While we have historically transacted in U.S. Dollars with the majority of our customers and suppliers, we have transacted in some foreign currencies and may transact in more foreign currencies in the future. Accordingly, changes in the value of foreign currencies relative to the U.S. Dollar may affect our revenue and operating results. As a result of such foreign currency exchange rate fluctuations, it could be more difficult to detect underlying trends in our business and operating results. In addition, to the extent that fluctuations in currency exchange rates cause our operating results to differ from our expectations or the expectations of our investors, the trading price of our stock could be adversely affected.

Our ability to use net operating losses to offset future taxable income may be subject to certain limitations.

As of December 31, 2021, Legacy Hyperfine had federal net operating loss carryforwards (“NOLs”) to offset future taxable income of approximately $103.4 million, of which $12.1 million will begin to expire in 2034 if not utilized. Liminal had federal NOLs to offset future taxable income of approximately $12.3 million. A lack of future taxable income would adversely affect our ability to utilize these NOLs. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended (the “Code”), a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its pre-change NOLs and other pre-change tax attributes (such as research tax credits) to offset post-change taxable income. For these purposes, an ownership change generally occurs where the equity ownership of one or more stockholders or groups of stockholders who owns at least 5% of a corporation’s stock increases its ownership by more than 50 percentage points over its lowest ownership percentage within a three-year period (calculated on a rolling basis). Our existing NOLs may be subject to limitations arising out of previous ownership changes and we may be limited as to the amount that can be utilized each year as a result of such previous ownership changes, including the Business Combination and related transactions. In addition, future changes in our stock ownership, including future offerings, as well as other changes that may be outside of our control, could result in additional ownership changes under Section 382 of the Code. Our NOLs may also be impaired

50

under similar provisions of state law. We have recorded a full valuation allowance related to our NOLs and other deferred tax assets due to the uncertainty of the ultimate realization of the future benefits of those assets.

In addition to the limitations discussed above under Sections 382 of the Code, the utilization of NOLs incurred in taxable years beginning after December 31, 2017, are subject to limitations adopted by the Tax Cuts and Jobs Act, as modified by the Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”). Under the Tax Act, in general, NOLs generated in taxable years beginning after December 31, 2017 may offset no more than 80 percent of such year’s taxable income and there is no ability for such NOLs to be carried back to a prior taxable year. The CARES Act modifies the Tax Act with respect to the Tax Act’s limitation on the deduction of NOLs and provides that NOLs arising in taxable years beginning after December 31, 2017 and before January 1, 2021, may be carried back to each of the five taxable years preceding the tax year of such loss, but NOLs arising in taxable years beginning after December 31, 2020 may not be carried back. In addition, the CARES Act eliminates the limitation on the deduction of NOLs to 80 percent of current year taxable income for taxable years beginning before January 1, 2021. As a result of such limitation, we may be required to pay federal income tax in some future year notwithstanding that we had a net loss for all years in the aggregate.

Risks Related to Healthcare Industry Shifts and Changing Regulations

We are subject to extensive government regulation, which could restrict the development, marketing, sale and distribution of our products and could cause us to incur significant costs.

Our medical devices and associated services are subject to extensive pre-market and post-market regulation by the FDA and various other federal, state, local and foreign government authorities. Government regulation of medical devices is meant to assure their safety and effectiveness, and includes requirements for, among other things:

The laws and regulations to which we and our products are subject are complex and subject to periodic changes. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales.

Before a new medical device, or a significant modification of a medical device, including a new use of or claim for an existing product, can be marketed in the United States, we must first receive either 510(k) clearance or premarket approval (“PMA”) from the FDA, unless an exemption applies. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. Clinical data is

51

sometimes required to support substantial equivalence. Legacy Hyperfine received 510(k) clearance from the FDA for its point-of-care MRI system in 2020. In addition, Legacy Hyperfine’s proprietary BrainInsight product is a fully automated MR imaging post-processing medical software that is regulated as a picture archiving and communications system, which may include both hardware and software components, and which is classified by FDA as a Class II medical device. BrainInsight received 510(k) marketing clearance in January 2021 for use in automatic labeling, spatial measurement, and volumetric quantification of brain structures from a set of low-field MR images and to return annotated and segmented images, color overlays, and reports. More recently, in November 2021, Legacy Hyperfine received 510(k) clearance for its new advanced image reconstruction technology using deep learning.

We may be required to obtain a new 510(k) clearance or PMA approval for significant post-market modifications to our products, including any modifications made to the commercially marketed our devices. In addition, Liminal does not have any commercial products. When Liminal’s products are marketed for clinical monitoring or therapeutic uses, they will be regulated by the FDA as medical devices. Because the products are still in development, it is presently unclear what level of risk the agency will assign to such products, what special controls may be imposed on such products (if any), and what regulatory requirements would be applicable to such products.

Obtaining 510(k) clearance or PMA approval for medical devices can be expensive and time-consuming, and entails significant user fees, unless an exemption is available. The FDA’s process for obtaining 510(k) clearance usually takes three to 12 months, but it can last longer. In the PMA approval process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including but not limited to, technical, nonclinical, clinical trial, manufacturing and labeling data. The process for obtaining a PMA is more costly and uncertain and approval can take anywhere from at least one year to, in some cases, multiple years from the time the application is initially filed with the FDA. Modifications to products that are approved through a PMA application generally require further FDA approval. Some of our future products may require PMA approval. In addition, the FDA may demand that we obtain a PMA prior to marketing future changes of our existing products. Further, we may not be able to obtain additional 510(k) clearances or PMAs for new products or for modifications to, or additional indications for, our products in a timely fashion or at all. Delays in obtaining future clearances or approvals could adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn could harm our revenue and future profitability.

In order to conduct a clinical investigation involving human subjects for the purpose of demonstrating the safety and effectiveness of a medical device, if necessary, for a PMA application or 510(k) notification, a company must, among other things, apply for and obtain institutional review board (“IRB”) approval of the proposed investigation. In addition, if the clinical study involves a “significant risk” (as defined by the FDA) to human health, the sponsor of the investigation must also submit and obtain FDA approval of an investigational device exemption (“IDE”) application and follow applicable IDE regulations. Unless IDE-exempt, nonsignificant risk devices are still subject to certain abbreviated IDE requirements, however, an IDE application is not required if such abbreviated requirements are met. We may not be able to obtain any necessary FDA and/or IRB approval to undertake clinical trials in the United States for future devices we develop and intend to market in the United States. If we do obtain such approvals, the FDA may find that our studies do not comply with the IDE or other regulations governing clinical investigations or the data from any such trials may not support clearance or approval of the investigational device. Moreover, certainty that clinical trials will meet desired endpoints, produce meaningful or useful data and be free of unexpected adverse effects, or that the FDA will accept the validity of foreign clinical study data (if applicable) cannot be assured, and such uncertainty could preclude or delay market clearance or authorizations resulting in significant financial costs and reduced revenue.

We are also subject to numerous post-marketing regulatory requirements, which include quality system regulations related to the manufacture of our devices, labeling regulations and medical device reporting (“MDR”) regulations. The last of these regulations requires us to report to the FDA if our devices cause or contribute to a death or serious injury, or malfunction in a way that would likely cause or contribute to a death or serious injury if the malfunction recurred. If we fail to comply with present or future regulatory requirements that are applicable to us, we may be subject to enforcement action by the FDA, which may include any of the following sanctions:

52

The occurrence of any of these events may have a material adverse effect on our business, financial condition and results of operations.

Our employees, independent contractors, consultants, manufacturers and suppliers may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, consultants, manufacturers and suppliers may engage in fraudulent or illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or disclosure of unauthorized activities to us that violates: (i) the laws of the FDA and other similar foreign regulatory bodies, including those laws requiring the reporting of true, complete and accurate information to such regulators; (ii) manufacturing standards; (iii) healthcare fraud and abuse laws in the United States and similar foreign fraudulent misconduct laws; or (iv) laws that require the true, complete and accurate reporting of financial information or data. These laws may impact, among other things, future sales, marketing and education programs. In particular, the promotion, sales and marketing of healthcare items and services, as well as certain business arrangements in the healthcare industry, are subject to extensive laws designed to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, structuring and commissions, certain customer incentive programs and other business arrangements generally. Activities subject to these laws also involve the improper use of information obtained in the course of patient recruitment for clinical trials.

We adopted a code of business conduct and ethics in connection with the Business Combination. It is not always possible to identify and deter misconduct by our employees and other third parties, and the precautions we take to detect and prevent these activities may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could result in the imposition of significant fines or other sanctions, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, disgorgement, individual imprisonment, additional integrity reporting and oversight obligations, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings and curtailment of operations, any of which could adversely affect our ability to operate our business and our results of operations. Whether or not we are successful in defending against any such actions or investigations, we could incur substantial costs, including legal fees, and divert the attention of management in defending ourselves against any of these claims or investigations, which could have a material adverse effect on our business, financial condition and results of operations.

There is no guarantee that the FDA will grant 510(k) clearance or PMA approval of our future products, and failure to obtain necessary clearances or approvals for our future products would adversely affect our ability to grow our business.

Some of our new or modified products will require FDA clearance of a 510(k) notification or FDA approval of a PMA application. The FDA may refuse our requests for 510(k) clearance or PMA of new products or may not clear or approve these products for the indications that are necessary or desirable for successful commercialization. Early stage review may also result in delays or other issues. For example, the FDA has issued guidance intended to explain the procedures and criteria used in assessing whether 510(k) and PMA submissions should be accepted for substantive review. Under the “Refuse to Accept” guidance, the FDA conducts an early review against specific acceptance criteria to inform 510(k) and PMA submitters if the submission is administratively complete, or if not, to identify the missing element(s). Submitters are given the opportunity to provide the FDA with any information identified as missing. If the information is not provided within a specified time, the submission will not be accepted for FDA review. The FDA may also change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions that may prevent or delay approval or clearance of our products under development or impact our ability to gain clearance or approval for modifications to our currently approved or cleared products in a timely manner. Significant delays in receiving clearance or approval, or the failure to receive clearance or approval for our new products would have an adverse effect on our ability to expand our business.

53

Recent initiatives by the FDA to enhance and modernize various regulatory pathways for device products and its overall approach to safety and innovation in the medical technology industry creates the possibility of changing product development costs, requirements, and other factors and additional uncertainty for our future products and business.

Regulatory requirements may change in the future in a way that adversely affects us. Any change in the laws or regulations that govern the clearance and approval processes or the post-market compliance requirements relating to our current and future products could make it more difficult and costly to obtain clearance or approval for new products, or to produce, market and distribute existing products.

For example, the FDA and other government agencies have been focusing on the cybersecurity risks associated with certain medical devices and encouraging device manufacturers to take a more proactive approach to assessing the cybersecurity risks of their devices both during development and on a periodic basis after the devices are in commercial distribution. These regulatory efforts could lead to new FDA requirements in the future or additional product liability or other litigation risks if any of our products is considered to be susceptible to third-party tampering. In December 2016, Congress passed the 21st Century Cures Act, which made multiple changes to the FDA’s rules for medical devices as well as for clinical trials, and in August 2017, Congress passed the Medical Device User Fee reauthorization package, which affects medical device regulation both pre- and post-approval and could have certain impacts on our business. Since that time, the FDA has announced a series of efforts to modernize and streamline the 510(k) notification and regulatory review process and monitoring post-market safety, and issued a final rule to formalize the De Novo classification process to provide clarity to innovative device developers. Changes in the FDA 510(k) process could make clearance more difficult to obtain, increase delay, add uncertainty and have other significant adverse effects on our ability to obtain and maintain clearance for our products.

It is unclear at this time whether and how various activities initiated or announced by the FDA to modernize the U.S. medical device regulatory system could affect our business, as some of the FDA’s new medical device safety and innovation initiatives have not been formalized and remain subject to change. For example, a 2018 Medical Device Safety Action Plan announced by former FDA Commissioner Gottlieb included a particular focus on post-market surveillance and how to respond when new safety concerns emerge once a product is on the market. The increased attention that the medical technology industry is receiving from FDA leadership that understands the challenging and rapidly changing nature of the U.S. healthcare system creates the possibility of unanticipated regulatory and other potential changes to our products and our overall business. In response to the COVID-19 public health emergency, the FDA’s device and diagnostic center leadership has exercised a significant amount of enforcement discretion to meet the medical community’s and patients’ needs for remote monitoring and other innovative solutions that involve digital health products. In December 2021, FDA issued draft guidance documents describing a phased transition process for medical devices that were developed or modified during the course of the pandemic to treat COVID-19 patients or allow greater access to patients, including medical imaging devices that were developed or modified in accordance with FDA’s Enforcement Policy for Imaging Systems During the COVID-19 Public Health Emergency. It is unclear how these policies could impact the medical device industry in the future.

If we fail to obtain regulatory authorizations in other countries for existing products or products under development, we will not be able to commercialize these products in those countries.

In order for us to market our products in countries outside of the United States, we must comply with extensive safety and quality regulations in other countries regarding the quality, safety and efficacy of our products. These regulations, including the requirements for marketing authorizations, and the time required for regulatory review, vary from country to country. Failure to obtain regulatory authorization in any foreign country in which we plan to market our products may harm our ability to generate revenue and harm our business. Marketing authorization requirements vary between countries and can involve additional product testing and additional administrative review periods. The time required to obtain marketing authorization in other countries might differ from that required to obtain FDA clearance or other marketing authorization. The regulatory process in other countries may include all of the risks detailed above regarding FDA clearance in the United States. Regulatory authorization of a product in one country does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory authorization in one country may negatively impact the regulatory process in others. Failure to obtain regulatory authorization in other countries or any delay or setback in obtaining such authorization could have the same adverse effects described above regarding FDA clearance in the United States.

The primary regulatory environment in Europe is that of the European Economic Area (“EEA”), which is comprised of the Member States of the European Union, Iceland, Liechtenstein and Norway. We cannot be certain that we will be successful in meeting and continuing to meet the requirements to market a medical device in the EEA in light of the current transition period between the prior system, called the Medical Device Directive (“MDD”), to the current system, called the Medical Device Regulation. The Medical Device Regulation went into force in May 2017 but allowed a three-year transition period

54

until May 2020 for Member States, regulatory authorities, and medical device stakeholders to come into compliance with the new requirements. A one-year delay of the compliance date of the Medical Device Regulation was implemented in response to the COVID-19 pandemic, which made May 2021 the final deadline for industry compliance. Compared to the MDD, the Medical Device Regulation promotes a shift from the pre-approval stage (i.e., the path to CE Marking) to a life-cycle approach and places greater emphasis on clinical data and clinical evaluations to assure the safety and performance of new medical devices. Moreover, the Medical Device Regulation includes elements intended to strengthen the conformity assessment procedures, assert greater control over notified bodies and their standards, increase overall system transparency, and impose more robust device vigilance requirements on manufacturers and distributors.

Among other changes, many device manufacturers will need to switch notified bodies to one that has received its designation under the Medical Device Regulation, which will require those manufacturers to undergo an audit and have all their documentation reviewed by the new notified body before it can assess their medical device products under the new standards. The new rules and procedures that have been created under the overhauled European regulations will likely result in increased regulatory oversight of all medical devices marketed in the European Union, and this may, in turn, increase the costs, time and requirements that need to be met in order to place an innovative or high-risk medical device on the EEA market.

If we, our current or future contract manufacturers, or our current or future component suppliers are unable to manufacture our products in sufficient quantities, on a timely basis, at acceptable costs and in compliance with regulatory and quality requirements, the manufacturing and distribution of our devices could be interrupted, and our product sales and operating results could suffer.

When producing and distributing commercial medical device products, we, our contract manufacturer, and our component suppliers are required to comply with the FDA’s Quality System Regulation (“QSR”), which is a complex regulatory framework that covers the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage, shipping and servicing of our devices. Compliance with applicable regulatory requirements is subject to continual review and is monitored rigorously through periodic, sometimes unannounced, inspections by the FDA. We cannot assure investors that our facilities or our third-party manufacturers’ or suppliers’ facilities would pass any future quality system inspection. Failure of us or our third-party manufacturers and component suppliers to adhere to QSR requirements or take adequate and timely corrective action in response to an adverse quality system inspection finding could delay production of our products and lead to fines, difficulties in obtaining regulatory clearances, recalls, enforcement actions, including injunctive relief or consent decrees, or other consequences, which could have a material adverse effect on our business, financial condition or results of operations. Any such failure, including the failure of our current or any future contract manufacturers, to achieve and maintain the required high manufacturing standards could result in further delays or failures in product testing or delivery, cost overruns, increased warranty costs or other problems that could harm our business and prospects.

In addition, any of our products shipped internationally are also required to comply with the International Organization for Standardization (“ISO”) quality system standards as well as European Directives and norms in order to produce products for sale in the European Union. In addition, many countries such as Canada and Japan have very specific additional regulatory requirements for quality assurance and manufacturing. If we fail to continue to comply with current good manufacturing requirements, as well as ISO or other regulatory standards, we may be required to cease all or part of our operations until we comply with these regulations. Maintaining compliance with multiple regulators adds complexity and cost to our manufacturing and compliance processes.

Our current or future products may be subject to product recalls even after receiving FDA clearance or approval. A recall of our products, either voluntarily or at the direction of the FDA, or the discovery of serious safety issues with our products, could have a significant adverse impact on us.

The FDA and similar governmental bodies in other countries have the authority to require the recall of our products if we or our third party manufacturers fail to comply with relevant regulations pertaining to, among other things, manufacturing practices, labeling, advertising or promotional activities, or if new information is obtained concerning the safety or efficacy of these products. For example, under the FDA’s Medical Device Reporting regulations, we are required to report to the FDA any incident in which our marketed products may have caused or contributed to a death or serious injury or in which our marketed products malfunctioned in a manner likely to cause or contribute to death or serious injury if that malfunction were to recur. Repeated adverse events or product malfunctions may result in a voluntary or involuntary product recall, or administrative or judicial seizure or injunction, when warranted. A government-mandated recall may be ordered if the FDA finds that there is a reasonable probability that the device would cause serious, adverse health consequences or death. A voluntary recall by us could occur as a result of any material deficiency in a device, such as manufacturing defects, labeling

55

deficiencies, packaging defects or other failures to comply with applicable regulations. In general, if we decide to make a change to our marketed product, we are responsible for determining whether to classify the change as a recall. It is possible that the FDA could disagree with our initial classification. The FDA requires that certain classifications of recalls be reported to the FDA within 10 working days after the recall is initiated. If a change to a device addresses a violation of the federal Food, Drug, and Cosmetic Act (“FDCA”), that change would generally constitute a medical device recall and require submission of a recall report to the FDA.

Recalls of any of our products would divert managerial and financial resources and have an adverse effect on our reputation, results of operations and financial condition, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. We may also be subject to product liability claims, be required to bear other costs, or be required to take other actions that may have a negative impact on our future sales and our ability to generate profits. Companies are required to maintain certain records of recalls, even if they are not reportable to the FDA. We may initiate voluntary recalls involving our products in the future that we determine do not require notification to the FDA. If the FDA disagrees with our determinations, the FDA could require us to report those actions as recalls. A future recall, withdrawal, or seizure of any product could materially and adversely affect consumer confidence in our brands, lead to decreased demand for our products and negatively affect our sales. In addition, the FDA could take enforcement action for failing to report recalls when they were conducted by us or one of our agents.

We may be subject to enforcement action if we engage in improper or off-label marketing or promotion of our commercial medical device products, including fines, penalties and injunctions.

Our promotional materials and training methods must comply with FDA and other applicable laws and regulations, including the prohibition of the promotion of unapproved, or off-label, uses of lawfully marketed medical device products. Physicians may, however, use our commercial products off-label, as the FDA does not restrict or regulate a physician’s practice of medicine. Medical device manufacturers and distributors are permitted to promote their products in a way that is consistent with the FDA-authorized labeling and indications for use. However, if the FDA determines that our promotional materials or training materials promote a 510(k)-cleared or approved medical device in a manner inconsistent with our labeling, the agency could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance of an Untitled Letter, a Warning Letter, injunction, seizure, civil fine or criminal penalties. In addition to ensuring that the claims we make are consistent with our regulatory clearances or approvals, the FDA also ensures that promotional labeling for all regulated medical devices is neither false nor misleading.

It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our promotional or training materials to constitute promotion of an off-label use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement. In that event, our reputation could be damaged, and adoption of our products could be impaired. Although our policy is to refrain from making statements or from disseminating promotional material that could be considered off-label promotion of our commercial medical device products, the FDA or another regulatory agency could disagree and conclude that we have engaged in off-label promotion. In addition, the off-label use of our products may increase the risk of product liability claims. Product liability claims are expensive to defend and could divert our management’s attention, result in substantial damage awards against us, and harm our reputation. Recent court decisions have impacted the FDA’s enforcement activity regarding off-label promotion in light of First Amendment considerations, although there are still significant risks in this area in part due to the potential False Claims Act exposure. Further, this area is subject to ongoing policy changes at the federal level, resulting in some degree of uncertainty for regulated businesses. For example, in August 2021 the FDA issued a final rule revising the agency’s regulation governing the types of evidence relevant to determining the “intended use” of a drug or device under the FDCA, which has significant implications for when a manufacturer or distributor has engaged in off-label marketing.

Digital marketing and social media efforts may expose us to additional regulatory scrutiny, including from the Federal Trade Commission (the “FTC”) and other consumer protection agencies and regulators.

In addition to the laws and regulations enforced by the FDA, advertising for various services and for non-restricted medical devices is subject to federal truth-in-advertising laws enforced by the FTC, as well as comparable state consumer protection laws. Our efforts to promote prescription medical device products via social media initiatives may subject us to additional scrutiny of our practices. For example, the FTC and other consumer protection agencies scrutinize all forms of advertising (whether in digital or traditional formats) for business services, consumer-directed products, and non-restricted medical devices to ensure that advertisers are not making false, misleading or unsubstantiated claims or failing to disclose material relationships between the advertiser and its products’ endorsers, among other potential issues. The FDA oversees the advertising and promotional labeling for restricted medical devices and ensures, among other things, that there is effective communication of, and a fair and balanced presentation of, the risks and benefits of such high-risk medical devices.

56

Under the Federal Trade Commission Act (“FTC Act”), the FTC is empowered, among other things, to (a) prevent unfair methods of competition and unfair or deceptive acts or practices in or affecting commerce; (b) seek monetary redress and other relief for conduct injurious to consumers; and (c) gather and compile information and conduct investigations relating to the organization, business, practices, and management of entities engaged in commerce. The FTC has very broad enforcement authority, and failure to abide by the substantive requirements of the FTC Act and other consumer protection laws can result in administrative or judicial penalties, including injunctions affecting the manner in which we would be able to market services or products in the future, or criminal prosecution. We plan to increase our advertising activities that may be subject to these federal and state truth-in-advertising laws. Any actual or perceived non-compliance with those laws could lead to an investigation by the FTC or a comparable state agency, or could lead to allegations of misleading advertising by private plaintiffs. Any such action against us could disrupt our business operations, cause damage to our reputation, and result in a material adverse effects on our business.

Because we do not require extensive training for users of our current products, although they are limited under the FDA’s marketing clearances to use by, and that images generated from the scanner be interpreted by, trained healthcare practitioners, there exists a potential for misuse of these products, misinterpretation of images by untrained professionals or misuse of these products by untrained professionals, which could ultimately harm our reputation and business.

Federal regulations allow us to sell our medical device products to or on the order of practitioners licensed by law to use or order the use of a prescription device. The definition of “licensed practitioners” varies from state to state. As a result, our current products may be purchased or operated by physicians with varying levels of training and, in many states, by non-physicians, including nurse practitioners, chiropractors and technicians. The FDA clearances of the products require interpretation of images by trained physicians and use of that information in determining a diagnosis. Outside the United States, many jurisdictions do not require specific qualifications or training for purchasers, or operators or interpreters, of medical device products. We do not supervise the procedures performed with our products, nor can we require that direct medical supervision occur. Although product training is offered, we do not require purchasers or operators of our non-invasive products to attend training sessions. The lack of required training and the purchase and use of our non-invasive products by non-physicians may result in product misuse and adverse treatment outcomes, which could harm our reputation and expose us to costly product liability litigation.

We are subject to federal, state and foreign laws prohibiting “kickbacks” and false or fraudulent claims, and other fraud and abuse laws, transparency laws, and other healthcare laws and regulations, which, if violated, could subject us to substantial penalties. Additionally, any challenge to or investigation into our practices under these laws could cause adverse publicity and be costly to respond to, and thus could harm our business.

Our relationships with customers and third-party payors are subject to broadly applicable fraud and abuse and other healthcare laws and regulations that may constrain our sales, marketing and other promotional activities by limiting the kinds of financial arrangements, including sales programs and certain customer and product support programs, we may have with hospitals, physicians or other purchasers of medical devices. Other federal and state laws generally prohibit individuals or entities from knowingly presenting, or causing to be presented, claims for payment from Medicare, Medicaid, or other third-party payors that are false or fraudulent, or are for items or services that were not provided as claimed. These laws include, among others, the federal healthcare Anti-Kickback Statute, the federal civil False Claims Act, other federal healthcare false statement and fraud statutes, the Open Payments program, the Civil Monetary Penalties Law, and analogous fraud and abuse and transparency laws in most states, as described in “Item 1. Business - Government Regulation.” Although the federal laws generally apply only to products or services for which payment may be made by a federal healthcare program, state laws often apply regardless of whether federal funds may be involved.

While we believe and strive to ensure that our business arrangements with third parties and other activities and programs comply with all applicable laws, these laws are complex, and our activities may be found not to be compliant with one or more of these laws, which may result in significant civil, criminal and/or administrative penalties, fines, damages and exclusion from participation in federal healthcare programs. Even an unsuccessful challenge or investigation into our practices could cause adverse publicity, and be costly to respond to, and thus could have a material adverse effect on our business, financial condition and results of operations. Our compliance with Medicare and Medicaid regulations may be reviewed by federal or state agencies, including the Office of Inspector General for the U.S. Department of Health and Human Services (“OIG”), Centers for Medicare & Medicaid Services (“CMS”), and the Department of Justice, or may be subject to whistleblower lawsuits under federal and state false claims laws. To ensure compliance with Medicare, Medicaid and other regulations, government agencies conduct periodic audits of the Company to ensure compliance with various supplier standards and billing requirements.

57

Similarly, our international operations are subject to the provisions of the FCPA, which prohibits U.S. companies and their intermediaries from making payments in violation of law to non-U.S. government officials for the purpose of obtaining or retaining business or securing any other improper advantage. In many countries, the healthcare professionals that medical device distributors regularly interact with may meet the definition of a foreign official for purposes of the FCPA. International business operations are also subject to various other international anti-bribery laws such as the U.K. Anti-Bribery Act. Despite meaningful measures that we undertake to facilitate lawful conduct, which include training and compliance programs and internal policies and procedures, we may not always prevent unauthorized, reckless or criminal acts by our employees or agents, or employees or agents of businesses or operations we may acquire. Violations of these laws, or allegations of such violations, could disrupt operations, involve significant management distraction and have a material adverse effect on our business, financial condition and results of operations, among other adverse consequences.

If we are found to have violated laws protecting the confidentiality of health information, we could be subject to civil or criminal penalties, which could increase our liabilities and harm our reputation or our business.

There are a number of federal and state laws protecting the confidentiality of certain health information and restricting the use and disclosure of that protected information. In particular, the U.S. Department of Health and Human Services promulgated privacy rules under the Health and Insurance Portability and Accountability Act (“HIPAA”). These privacy rules protect medical records and other personal health information by limiting their use and disclosure, giving individuals the right to access, amend and seek accounting of their own health information and limiting most use and disclosures of health information to the minimum amount reasonably necessary to accomplish the intended purpose. We are not subject to HIPAA, but our customers and research collaborators and other healthcare provider partners are, which means that there are restrictions on our ability to receive and use health information from our healthcare provider partners. If we are found to be in violation of applicable privacy rule requirements, we could subject our customers or healthcare provider partners to civil or criminal penalties, which could increase our liabilities, harm our reputation and have a material adverse effect on our business, financial condition and results of operations.

We are subject to complex and evolving U.S. and foreign laws and regulations regarding privacy, data protection, and other matters. Many of these laws and regulations are subject to change and uncertain interpretation, and could result in claims, changes to our business practices, monetary penalties, increased cost of operations, or declines in customer growth or engagement, or otherwise harm our business.

We are subject to a variety of laws and regulations in the United States and abroad that involve matters central to our business, including laws and regulations relating to privacy, data sharing and data protection, artificial intelligence and use of machine learning, rights of publicity, content, intellectual property, advertising, marketing, distribution, data security, data retention and deletion, personal information, electronic contracts and other communications, competition, protection of minors, consumer protection, telecommunications, product liability, taxation, economic or other trade prohibitions or sanctions, corrupt practices, fraud, waste and abuse restrictions, and securities law compliance. The introduction of new products or expansion of our activities in certain jurisdictions may subject us to additional laws and regulations. For example, in addition to data protection laws passed by the federal government, many states and foreign countries have implemented their own data protection laws, some of which may apply simultaneously and conflict with federal law. Many of these laws create consumer rights including the right to know what personal information is collected, the right to know whether the data is sold or disclosed and to whom, the right to request that a company delete personal information collected, the right to opt-out of the sale of personal information and the right to non-discrimination in terms of price or service when a consumer exercises a privacy right. If we fail to comply with these regulations, we could be subject to civil sanctions, including fines and penalties for noncompliance.

In addition, foreign data protection, privacy, and other laws and regulations can be more restrictive than those in the United States. Data localization laws in some countries generally mandate that certain types of data collected in a particular country be stored and/or processed within that country. We could be subject to audits in Europe and around the world, particularly in the areas of consumer and data protection, as we continue to grow and expand our operations. Legislators and regulators may make legal and regulatory changes, or interpret and apply existing laws, in ways that make our products less useful to customers, require us to incur substantial costs, expose us to unanticipated civil or criminal liability, or cause us to change our business practices. These changes or increased costs could negatively impact our business and results of operations in material ways. For example, the general data privacy regulation (“GDPR”) imposes requirements in the EEA relating to, among other things, consent to process personal data of individuals, the information provided to individuals regarding the processing of their personal data, the security and confidentiality of personal data, notifications in the event of data breaches and use of third party processors. If we fail to comply with these standards, we could be subject to criminal penalties and civil sanctions, including fines and penalties and amounts could be significant.

58

Cybersecurity risks and cyber incidents could result in the compromise of confidential data or critical data systems and give rise to potential harm to customers, remediation and other expenses, expose us to liability under federal or state law, consumer protection laws, or other common law theories, subject us to litigation and federal and state governmental inquiries, damage our reputation, and otherwise be disruptive to our business and operations.

Cyber incidents can result from deliberate attacks or unintentional events. We collect and store on our networks sensitive information, including intellectual property, proprietary business information and personally identifiable information of individuals, such as our employees and customers. The secure maintenance of this information and technology is critical to our business operations. As a pre-commercial company, Liminal’s security infrastructure is evolving consistent with its business operations and security risk profile. Legacy Hyperfine has implemented multiple layers of security measures to protect the confidentiality, integrity and availability of these data and the systems and devices that store and transmit such data. Legacy Hyperfine utilizes current security technologies, including encryption and data depersonalization, and its defenses are monitored and routinely tested. Despite these efforts, threats from malicious persons and groups, new vulnerabilities and advanced new attacks against information systems create risk of cybersecurity incidents. These incidents can include, but are not limited to, gaining unauthorized access to digital systems for purposes of misappropriating assets or sensitive information, corrupting data, or causing operational disruption. Because the techniques used to obtain unauthorized access, disable or degrade service, or sabotage systems change frequently and may not immediately produce signs of intrusion, we may be unable to anticipate these incidents or techniques, timely discover them, or implement adequate preventative measures.

Cybersecurity threats can come from a variety of sources, and may range in sophistication from an individual hacker to malfeasance by employees, consultants or other service providers to state-sponsored attacks. Cyber threats may be generic, or they may be custom-crafted against our information systems. Over the past several years, cyber-attacks have become more prevalent and much harder to detect and defend against. Our network and storage applications, as well as those of our contractors, may be vulnerable to cyber-attack, malicious intrusion, malfeasance, loss of data privacy or other significant disruption and may be subject to unauthorized access by hackers, employees, consultants or other service providers. In addition, hardware, software or applications that we develop or procure from third parties may contain defects in design or manufacture or other problems that could unexpectedly compromise information security. Unauthorized parties may also attempt to gain access to our systems or facilities through fraud, trickery or other forms of deceiving employees, contractors and temporary staff.

There can be no assurance that we will not be subject to cybersecurity incidents that bypass our security measures, impact the integrity, availability or privacy of health information or other data subject to privacy laws or disrupt our information systems, devices or business, including our ability to deliver services to our users. As a result, cybersecurity, physical security and the continued development and enhancement of our controls, processes and practices designed to protect our enterprise, information systems and data from attack, damage or unauthorized access remain a priority for us. As cyber threats continue to evolve, we may be required to expend significant additional resources to continue to modify or enhance our protective measures or to investigate and remediate any cybersecurity vulnerabilities. The occurrence of any of these events could result in:

59

Security breaches, loss of data and other disruptions could compromise sensitive information related to our business or prevent us from accessing critical information and expose us to liability, which could adversely affect our business and our reputation.

In the ordinary course of our business, we collect and store sensitive data, and intellectual property and proprietary business information owned or controlled by us or our users. This data encompasses a wide variety of business-critical information, including research and development information, commercial information, and business and financial information. We face four primary risks relative to protecting this critical information: loss of access; inappropriate disclosure; inappropriate modification; and inadequate monitoring of our controls over the first three risks.

The secure processing, storage, maintenance, and transmission of this critical information is vital to our operations and business strategy, and we devote significant resources to protecting such information. Although we take measures to protect sensitive information from unauthorized access or disclosure, our information technology and infrastructure may be vulnerable to attacks by hackers or viruses, breaches, interruptions due to employee error, malfeasance, lapses in compliance with privacy and security mandates, or other disruptions. Any such breach or interruption could compromise our networks and the information stored there could be accessed by unauthorized parties, publicly disclosed, lost, or stolen.

Any such security breach or interruption, as well as any action by us or our employees or contractors that might be inconsistent with the rapidly evolving data privacy and security laws and regulations applicable within the United States and elsewhere where we conduct business, could result in enforcement actions by U.S. states, the U.S. federal government or foreign governments, liability or sanctions under data privacy laws that protect personally identifiable information, regulatory penalties, other legal proceedings such as but not limited to private litigation, the incurrence of significant remediation costs, disruptions to our development programs, business operations and collaborations, diversion of management efforts and damage to us and our brands’ reputation, which could harm our business and operations. Because of the rapidly moving nature of technology and the increasing sophistication of cybersecurity threats, our measures to prevent, respond to and minimize such risks may be unsuccessful.

With respect to medical information, we follow HIPAA guidelines when applicable and separate personal information from medical information, and employ additional measures such as encryption tools to protect the privacy of our users and medical data. However, hackers may attempt to penetrate our computer systems, and, if successful, misappropriate personal or confidential business information. In addition, an associate, contractor or other third party with whom we do business may attempt to circumvent our security measures in order to obtain such information, and may purposefully or inadvertently cause a breach involving such information. While we continue to implement additional protective measures to reduce the risk of and detect cyber incidents, cyber-attacks are becoming more sophisticated and frequent, and the techniques used in such attacks change rapidly.

In addition, the European Parliament and the Council of the European Union adopted the comprehensive GDPR in 2016 to replace the current European Union Data Protection Directive and related country-specific legislation. The GDPR took effect in May 2018 and governs the collection and use of personal data in the European Union. The GDPR, which is wide-ranging in scope, imposes requirements relating to the consent of the individuals to whom the personal data relates, the information provided to the individuals, the security and confidentiality of the personal data, data breach notification and the use of third party processors in connection with the processing of the personal data. The GDPR also imposes strict rules on the transfer of personal data out of the European Union to the United States, enhances enforcement authority and imposes large penalties for noncompliance, including the potential for fines of up to €20 million or 4% of the annual global revenues of the infringer, whichever is greater. While we comply with the GDPR, including reviewing our security procedures and entering into data processing agreements with relevant contractors, there can be no assurance that as our operations evolve, our efforts to comply or to remain in compliance will be fully successful.

Further, unauthorized access, loss or dissemination of sensitive personal data, such as health information, could also disrupt our operations, including our ability to conduct research and development activities, process and prepare company financial information, manage various general and administrative aspects of our business and damage our reputation, any of which could adversely affect our business and reputation. In addition, there can be no assurance that we will promptly detect any such disruption or security breach, if at all. To the extent that any disruption or security breach were to result in a loss of or damage to our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability and the further development of our products could be delayed.

60

Broad-based domestic and international government initiatives to reduce spending, particularly those related to healthcare costs, may reduce reimbursement rates for medical procedures, which will reduce the cost-effectiveness of our products and services.

Healthcare reforms, changes in healthcare policies and changes to third-party coverage and reimbursements, including legislation enacted reforming the U.S. healthcare system and both domestic and foreign healthcare cost containment legislation, and any future changes to such legislation, may affect demand for our products and services and may have a material adverse effect on our financial condition and results of operations. The ongoing implementation of the Affordable Care Act, in the United States, as well as state-level healthcare reform proposals could reduce medical procedure volumes and impact the demand for medical device products or the prices at which we can sell products. These reforms include a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models. The impact of this healthcare reform legislation, and practices including price regulation, competitive pricing, comparative effectiveness of therapies, technology assessments, and managed care arrangements are uncertain. There can be no assurance that current levels of reimbursement will not be decreased in the future, or that future legislation, regulation, or reimbursement policies of third parties will not adversely affect the demand for our products and services or our ability to sell products and provide services on a profitable basis. The adoption of significant changes to the healthcare system in the United States, the EEA or other jurisdictions in which we may market our products and services, could limit the prices we are able to charge for our products and services or the amounts of reimbursement available for our products and services, could limit the acceptance and availability of our products and services, reduce medical procedure volumes and increase operational and other costs.

In addition, following judicial and Congressional challenges to certain aspects of the Affordable Care Act, certain sections of the Affordable Care Act, as a result, have not been fully implemented or were effectively repealed. However, following several years of litigation in the federal courts, in June 2021, the U.S. Supreme Court upheld the Affordable Care Act when it dismissed a legal challenge to the constitutionality of the Affordable Care Act. Further legislative and regulatory changes under the Affordable Care Act remain possible, although the new Democrat-led presidential administration has been taking steps to strengthen the Affordable Care Act and the 117th Congress is not expected to have the same interest in repealing the law, in part due to the healthcare economic impacts of the ongoing COVID-19 pandemic. In addition to the Affordable Care Act, there have been and will likely continue to be other federal and state changes that affect the provision of healthcare goods and services in the United States. While we are unable to predict what changes may ultimately be enacted, to the extent that future changes affect how our products and services are paid for and reimbursed by government and private payers, our business could be adversely impacted. Moreover, complying with any new legislation or reversing changes implemented under the Affordable Care Act could be time-intensive and expensive, resulting in a material adverse effect on the business.

Risks Related to our Intellectual Property

If we are unable to obtain and maintain and enforce sufficient intellectual property protection for our products and technology, or if the scope of the intellectual property protection obtained is not sufficiently broad, our competitors could develop and commercialize products similar or identical to ours, and our ability to successfully commercialize our products may be impaired.

We rely on patent protection as well as trademark, copyright, trade secret and other intellectual property right protection and contractual restrictions to protect our proprietary products and technologies, all of which provide limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. If we fail to obtain, maintain and sufficiently enforce our intellectual property, third parties may be able to compete more effectively against us. In addition, we may incur substantial litigation costs in our attempts to recover damages or restrict use of our intellectual property.

To the extent our intellectual property offers inadequate protection, or is found to be invalid or unenforceable, we would be exposed to a greater risk of direct competition. If our intellectual property does not provide adequate coverage against our competitors’ products, our competitive position could be adversely affected, as could our business, financial condition, results of operations and prospects. Both the patent application process and the process of managing patent and other intellectual property disputes can be time-consuming and expensive.

Our success depends in large part on our and our licensors’ ability to obtain and maintain protection of the intellectual property we may own solely or jointly with, or license from, third parties, particularly patents, in the United States and other countries directed to our products and technologies. We apply for patents covering our products and technologies and uses thereof, as we deem appropriate. However, obtaining and enforcing patents is costly, time-consuming and complex, and we may fail to apply for patents on important products and technologies in a timely fashion or at all, or we may fail to apply for patents in potentially relevant jurisdictions. We may not be able to file and prosecute all necessary or desirable patent applications, or maintain, enforce and license any patents that may issue from such patent applications, at a reasonable cost or

61

in a timely manner or in all jurisdictions. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. Moreover, we may not develop additional proprietary products, methods and technologies that are patentable. We may not have the right to control the preparation, filing and prosecution of patent applications, or to maintain the rights to patents licensed from or to third parties. Therefore, these patents and applications may not be prosecuted, obtained and enforced by such third parties in a manner consistent with the best interests of our business.

In addition, the patent position of life sciences and medical technology companies generally is highly uncertain, involves complex legal and factual questions, and has been the subject of much litigation in recent years. Changes in either the patent laws or in interpretations of patent laws in the United States or other countries or regions may diminish the value of our intellectual property. As a result, the issuance, scope, validity, enforceability, and commercial value of our patent rights presents some degree of uncertainty. It is possible that some of our pending patent applications will not result in issued patents in a timely fashion or at all, and even if patents are granted, they may not provide a basis for intellectual property protection of commercially viable products or services, may not provide any competitive advantages, or may be challenged, narrowed and/or invalidated by third parties. There exists some degree of uncertainty over the breadth of claims that may be allowed or enforced in our patents or in third-party patents. It is possible that third parties will attempt to design around our current or future patents such that we cannot prevent such third parties from using similar technologies and commercializing similar products to compete with us. Some of our owned or licensed patents or patent applications may be challenged at a future point in time and we may not be successful in defending any such challenges made against our patents or patent applications. Any successful third-party challenge to our patents could result in the narrowing, unenforceability or invalidity of such patents and increased competition to our business. The outcome of patent litigation or other proceedings can be uncertain, and any attempt by us to enforce our patent rights against others or to challenge the patent rights of others may not be successful, or, regardless of success, may take substantial time and result in substantial cost, and may divert our efforts and attention from other aspects of our business. Any of the foregoing events could have a material adverse effect on our business, financial condition and results of operations.

The U.S. law relating to the patentability of certain inventions in the life sciences and medical technology industry is uncertain and rapidly changing, which may adversely impact our existing patents or our ability to obtain patents in the future.

Changes in either the patent laws or interpretation of the patent laws in the United States or in other jurisdictions could increase the uncertainties and costs surrounding the prosecution of patent applications and the enforcement or defense of issued patents. For instance, under the Leahy-Smith America Invents Act (the “America Invents Act”), enacted in September 2011, the United States transitioned to a first inventor to file system in which, assuming that other requirements for patentability are met, the first inventor to file a patent application is entitled to the patent on an invention regardless of whether a third party was the first to invent the claimed invention. These changes include allowing third-party submission of prior art to the United States Patent and Trademark Office (“USPTO”) during patent prosecution and additional procedures to challenge the validity of a patent through USPTO administered post-grant proceedings, including post-grant review, inter partes review, and derivation proceedings. The America Invents Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business, financial condition, results of operations and prospects.

Various courts, including the U.S. Supreme Court, have rendered decisions that impact the scope of patentability of certain inventions or discoveries relating to life sciences and medical technology. Specifically, these decisions stand for the proposition that patent claims that recite laws of nature, natural phenomena, and abstract ideas are not themselves patentable unless those patent claims have sufficient additional features that provide practical assurance that the processes are genuine inventive applications of those laws, phenomena, and abstract ideas rather than patent drafting efforts designed to monopolize the law of nature, natural phenomenon, or abstract idea itself. What constitutes a “sufficient” additional feature is somewhat uncertain. Furthermore, in view of these decisions, since December 2014, the USPTO has published and continues to publish revised guidelines for patent examiners to apply when examining process claims for patent eligibility.

In addition, U.S. Supreme Court rulings have narrowed the scope of patent protection available in certain circumstances and weakened the rights of patent owners in certain situations. In addition to some degree of uncertainty with regard to Company’s ability to obtain patents in the future, this combination of events has created a degree of uncertainty with respect to the value of patents, once obtained. Depending on relevant laws enacted by the U.S. Congress, and decisions by the federal courts and the USPTO, the laws and regulations governing patents could change in unpredictable ways that may have a material adverse effect on our ability to obtain new patents and to defend and enforce our existing patents and patents that we might obtain in the future.

62

Our patent portfolio may be negatively impacted by current uncertainties in the state of the law, new court rulings or changes in guidance or procedures issued by the USPTO or other similar patent offices around the world. From time to time, the U.S. Supreme Court, other federal courts, the U.S. Congress or the USPTO may change the standards of patentability, scope and validity of patents within the life sciences and medical technology and any such changes, or any similar adverse changes in the patent laws of other jurisdictions, could have a negative impact on our business, financial condition, prospects and results of operations.

We may not be able to protect our intellectual property rights throughout the world.

The laws of some foreign countries do not offer intellectual property rights to the same extent as the laws of the United States, and we and our licensors may encounter difficulties in obtaining, enforcing and defending such rights in foreign jurisdictions. Consequently, we and our licensors may not be able to prevent third parties from practicing our or our licensors’ inventions in some or all countries outside the United States, or from selling or importing products made using our or our licensors’ inventions in other jurisdictions. Competitors and other third parties may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and technologies and may also export infringing products to territories where we have patent protection, but enforcement practices or laws are not as strong as those in the United States. These products may compete with our products. Our and our licensors’ patents or other intellectual property rights may not be effective or sufficient to prevent them from competing. In addition, certain countries have compulsory licensing laws under which a patent owner may be compelled to grant licenses to other parties. Furthermore, many countries limit the enforceability of patents against other parties, including government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of any patents.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain other countries are not as developed or as favorable as the United States in the enforcement of patents and other intellectual property rights, which could make it difficult for us to stop the misappropriation or other violations of our intellectual property rights including infringement of our patents in such countries. The legal systems in certain countries may also favor state-sponsored companies or companies headquartered in particular jurisdictions over our first-in-time patents and other intellectual property rights. The absence of harmonized intellectual property protection laws and effective enforcement makes it difficult to ensure consistent respect for patent, trade secret, and other intellectual property rights on a worldwide basis. As a result, it is possible that we will not be able to enforce our rights against third parties that misappropriate our proprietary technology in those countries.

Proceedings to enforce our or our licensors’ patent rights in foreign jurisdictions could result in substantial cost and divert our efforts and attention from other aspects of our business, could put us and our licensors’ patents at risk of being invalidated or interpreted narrowly and our and our licensors’ patent applications at risk of not issuing, and could provoke third parties to assert claims against us. We and our licensors may not prevail in any lawsuits that we or our licensors initiate, or that are initiated against us or our licensors, and the damages or other remedies awarded, if any, may not be commercially meaningful. In addition, changes in the law and legal decisions by courts in the United States and foreign countries may affect our ability to obtain adequate protection for our products, services and other technologies and the enforcement of intellectual property. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license. Any of the foregoing events could have a material adverse effect on our business, financial condition, results of operations and prospects.

Issued patents covering our products could be found invalid or unenforceable if challenged.

Our owned and licensed patents and patent applications may be subject to validity, enforceability and priority disputes. The issuance of a patent is not conclusive as to its inventorship, scope, validity or enforceability. Some of our patents or patent applications (including licensed patents and patent applications) may be challenged at a future point in time in opposition, derivation, reexamination, inter partes review, post-grant review or interference or other similar proceedings, as applicable. Any successful third-party challenge to our patents in this or any other proceeding could result in the unenforceability or invalidity of such patents, which may lead to increased competition to our business, which could have a material adverse effect on our business, financial condition, results of operations and prospects. In addition, if we or our licensors initiate legal proceedings against a third party to enforce a patent covering our products, the defendant could counterclaim that such patent covering our products, as applicable, is invalid and/or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity or unenforceability are commonplace. There are numerous grounds upon which a third party can assert invalidity or unenforceability of a patent. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness or non-enablement. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent intentionally

63

withheld relevant information from the relevant patent office, or knowingly made a misleading statement, during prosecution. Third parties may also raise similar claims before administrative bodies in the United States or abroad, even outside the context of litigation. Such mechanisms include ex parte re-examination, inter partes review, post-grant review, derivation and equivalent proceedings in non-U.S. jurisdictions, such as opposition proceedings. Such proceedings could result in revocation of or amendment to our patents in such a way that they no longer cover and protect our products. With respect to the validity of our patents, for example, we cannot be certain that there is no invalidating prior art of which we, our licensors, our patent counsel and the patent examiner were unaware during prosecution. The outcome following legal assertions of invalidity and unenforceability during patent litigation is unpredictable. If a defendant or other third party were to prevail on a legal assertion of invalidity or unenforceability, we would lose at least part, and perhaps all, of the patent protection on certain aspects of our products and technologies, which could have a material adverse effect on our business, financial condition, results of operations and prospects. In addition, if the breadth or strength of protection provided by our patents and patent applications is threatened, regardless of the outcome, it could dissuade companies from collaborating with us to license intellectual property, or develop or commercialize current or future products.

We may not be aware of all third-party intellectual property rights potentially relating to our products. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the United States and other jurisdictions are typically not published until approximately 18 months after filing or, in some cases, not until such patent applications issue as patents. We might not have been the first to make the inventions covered by each of our pending patent applications and we might not have been the first to file patent applications for these inventions. To determine the priority of these inventions, we may have to participate, as applicable, in interference proceedings, derivation proceedings or other post-grant proceedings declared by the USPTO, or other similar proceedings in non-U.S. jurisdictions that could result in substantial cost to us and the loss of valuable patent protection. The outcome of such proceedings is uncertain. No assurance can be given that other patent applications will not have priority over our patent applications. In addition, changes to the patent laws of the United States allow for various post-grant opposition proceedings that have not been extensively tested, and their outcome is therefore uncertain. Furthermore, if third parties bring these proceedings against our patents, regardless of the merit of such proceedings and regardless of whether we are successful, we could experience significant costs and our management may be distracted.

Any of the foregoing events could have a material adverse effect on our business, financial condition, results of operations and prospects.

If we are unable to protect the confidentiality of our trade secrets, the value of our technology could be materially adversely affected and our business could be harmed.

We rely heavily on trade secrets and confidentiality agreements to protect our unpatented know-how, technology and other confidential proprietary information, and to maintain our competitive position. However, trade secrets and know-how can be difficult to protect. In particular, we anticipate that with respect to our technologies, these trade secrets and know-how will over time be disseminated within the industry through independent development, the publication of journal articles describing the methodology, and the movement of personnel from academic to industry scientific positions.

In addition to pursuing patents on our technology, we take steps to protect our intellectual property and proprietary technology by entering into agreements, including confidentiality agreements, non-disclosure agreements and intellectual property assignment agreements, with our employees, consultants, academic institutions, corporate partners and, when needed, our advisers. However, we cannot be certain that such agreements have been entered into with all relevant parties, and we cannot be certain that our trade secrets and other confidential proprietary information will not be disclosed or that competitors or other third parties will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. For example, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Such agreements may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements, and we may not be able to prevent such unauthorized disclosure, which could materially and adversely impact our ability to establish or maintain a competitive advantage in the market, and our business, financial condition, results of operations and prospects.

Monitoring unauthorized disclosure is difficult, and we do not know whether the steps we have taken to prevent such disclosure are, or will be, adequate. If we were to enforce a claim that a third party had wrongfully obtained and was using our trade secrets, it would be expensive and time-consuming, it could distract our personnel, and the outcome would be unpredictable. In addition, courts outside the United States may be less willing to protect trade secrets or may not recognize certain claims of intellectual property infringement.

64

We also seek to preserve the integrity and confidentiality of our confidential proprietary information by maintaining physical security of our premises and physical and electronic security of our information technology systems, but it is possible that these security measures could be breached. If any of our confidential proprietary information were to be lawfully obtained or independently developed by a competitor or other third party, absent patent and copyright protection, we would have no right to prevent such competitor from using that technology or information to compete with us, which could harm our competitive position. Competitors or third parties could purchase our products and attempt to replicate some or all of the competitive advantages we derive from our development efforts, design around our protected technology, develop their own competitive technologies that fall outside the scope of our intellectual property rights or independently develop our technologies without reference to our trade secrets. If any of our trade secrets were to be disclosed to or independently discovered by a competitor or other third party, it could materially and adversely affect our business, financial condition, results of operations and prospects.

We may be subject to claims challenging the inventorship and ownership of our patents and other intellectual property.

We or our licensors may be subject to claims that former employees, collaborators or other third parties have an interest in our owned or in-licensed patents, trade secrets or other intellectual property as an inventor or co-inventor. For example, we or our licensors may have inventorship disputes arise from alleged inventors such as employees, consultants, advisors or others who are involved in developing our products, some of whom may have conflicting intellectual property ownership obligations. In addition, counterparties to our consulting, sponsored research, software development and other agreements may assert that they have an ownership interest in intellectual property developed under such arrangements. In particular, certain software development agreements pursuant to which certain third parties have developed parts of our proprietary software may not include provisions that expressly assign to us ownership of all intellectual property developed for us by such third parties. Furthermore, certain of our sponsored research agreements pursuant to which we provide certain research services for third parties do not assign to us all intellectual property developed under such agreements. As such, we may not have the right to use all such developed intellectual property under such agreements, we may be required to obtain licenses from third parties and such licenses may not be available on commercially reasonable terms or at all, or may be non-exclusive. If we are unable to obtain such licenses and such licenses are necessary for the development, manufacture and commercialization of our products and technologies, we may need to cease the development, manufacture or commercialization of our products and technologies. Litigation may be necessary to defend against these and other claims challenging inventorship of our or our licensors’ ownership of our owned or in-licensed patents, trade secrets or other intellectual property. If we or our licensors fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights. In such an event, we may be required to obtain licenses from third parties and such licenses may not be available on commercially reasonable terms or at all, or may be non-exclusive. If we are unable to obtain and maintain such licenses, we may need to cease the development, manufacture or commercialization of our products and technologies. Even if we are successful in defending against such claims, litigation could result in substantial costs and loss of time and be a distraction to management and other employees, and certain customers or partners may defer engaging with us until the particular dispute is resolved. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operations and prospects.

We may not be able to protect and enforce our trademarks and trade names, or build name recognition in our markets of interest thereby harming our competitive position.

The registered or unregistered trademarks or trade names that we own may be challenged, infringed, circumvented, declared generic or otherwise fail to function as a mark, lapsed or determined to be confusingly similar to or dilutive of other marks. We may not be able to protect our rights in these trademarks and trade names, which we need in order to build name recognition. In addition, third parties have filed, and may in the future file, for registration of trademarks similar or identical to our trademarks, thereby impeding our ability to build brand identity and possibly leading to consumer confusion. If such third parties were to succeed in registering or developing common law rights in any other trademarks that are similar or identical to our trademarks, and if we are not successful in challenging such rights and defending against challenges to Company’s trademarks, we may not be able to use such trademarks to develop brand recognition of our technologies, products or services. In addition, there could be potential trade name or trademark infringement claims brought by owners of other registered trademarks or trademarks that incorporate variations of our registered or unregistered trademarks or trade names. Further, we have and may in the future enter into agreements with owners of such third party trade names or trademarks to avoid potential trademark litigation which may limit our ability to use our trade names or trademarks in certain fields of business. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively, and our business, financial condition, results of operations and prospects may be adversely affected. Our efforts to enforce or protect our proprietary rights related to trademarks, trade secrets, domain names, copyrights or other intellectual property may be ineffective and could result in substantial costs and

65

diversion of resources. Any of the foregoing events could have a material adverse effect on our business, financial condition and results of operations.

Patent terms may be inadequate to protect our competitive position on our products for an adequate amount of time.

Patents have a limited lifespan. In the United States, if all maintenance fees are timely paid, the natural expiration of a utility patent is generally 20 years from its earliest U.S. non-provisional filing date. While extensions may be available, the life of a patent, and the protection it affords, is limited. In the United States, a patent’s term may, in certain cases, be lengthened by patent term adjustment, which compensates a patentee for administrative delays by the USPTO in examining and granting a patent, or may be shortened if a patent is terminally disclaimed over a commonly owned patent or a patent naming a common inventor and having an earlier expiration date. Even if patents covering our products are obtained, once the patent life has expired, we may be open to competition from competitive products. If one of our products requires extended development, testing and/or regulatory review, patents protecting such products might expire before or shortly after such products are commercialized. As a result, our owned and licensed patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to our products, which could have a material adverse effect on our business, financial condition and results of operations.

We may be subject to claims that our employees, consultants or independent contractors have wrongfully used or disclosed to us alleged trade secrets of their other clients or former employers, which could subject us to costly litigation.

As is common in the life sciences and medical industry, we engage the services of consultants and independent contractors to assist us in the development of our products. Many of these consultants and independent contractors were previously employed at, or may have previously or may be currently providing consulting or other services to, universities or other technology, biotechnology or pharmaceutical companies, including our competitors or potential competitors. We may become subject to claims that we, a consultant or an independent contractor inadvertently or otherwise used or disclosed trade secrets or other information proprietary to their former employers or their former or current clients. We may similarly be subject to claims stemming from similar actions of an employee, such as one who was previously employed by another company, including a competitor or potential competitor. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to our management team. If we are not successful we could lose access or exclusive access to valuable intellectual property.

We may become involved in lawsuits to defend against third-party claims of infringement, misappropriation or other violations of intellectual property rights or to protect or enforce our intellectual property, any of which could be expensive, time consuming and unsuccessful, and may prevent or delay our development and commercialization efforts.

Our commercial success depends in part on our ability and the ability of future collaborators to develop, manufacture, market and sell our product and use our products and technologies without infringing, misappropriating or otherwise violating the intellectual property rights of third parties. There is a substantial amount of litigation involving patents and other intellectual property rights in the life sciences and medical technology sector, as well as administrative proceedings for challenging patents, including interference, derivation, inter partes review, post grant review, and reexamination proceedings before the USPTO, or oppositions and other comparable proceedings in foreign jurisdictions. We may be exposed to, or threatened with, future litigation by third parties having patent or other intellectual property rights alleging that our products, manufacturing methods, software and/or technologies infringe, misappropriate or otherwise violate their intellectual property rights. Numerous issued patents and pending patent applications that are owned by third parties exist in the fields in which we are developing our products and technologies. It is not always clear to industry participants, including us, the claim scope that may issue from pending patent applications owned by third parties or which patents cover various types of products, technologies or their methods of use or manufacture. Thus, because of the large number of patents issued and patent applications filed in our fields, there may be a risk that third parties, including our competitors, may allege they have patent rights encompassing our products, technologies or methods and that we are employing technology protected by such patent rights without authorization.

If third parties, including our competitors, believe that our products or technologies infringe, misappropriate or otherwise violate their intellectual property rights, such third parties may seek to enforce against us their intellectual property rights, including patent rights, by filing against us an intellectual property-related lawsuit, including a patent infringement lawsuit. Even if we believe third-party intellectual property claims are without merit, there is no assurance that a court would find in our favor on questions of infringement, validity, enforceability, or priority. If any third parties were to assert these or any other patents against us and we are unable to successfully defend against any such assertions, we may be required, including by court order, to cease the development and commercialization of the infringing products or technology and we may be required to redesign such products and technologies so they do not infringe such patents, which may not be possible or may require substantial monetary expenditures and time. We could also be required to pay damages, which could be significant,

66

including treble damages and attorneys’ fees if we are found to have willfully infringed such patents. We could also be required to obtain a license to such patents in order to continue the development and commercialization of the infringing product or technology. However, such a license may not be available on commercially reasonable terms or at all, including because certain of these patents may be held by or exclusively licensed to our competitors. Even if such a license were available, it may require substantial payments or cross-licenses under our intellectual property rights, and it may only be available on a nonexclusive basis, in which case third parties, including our competitors, could use the same licensed intellectual property to compete with us. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operation and prospects.

We may choose to challenge, including in connection with any allegation of patent infringement by a third party, the patentability, validity, ownership or enforceability of any third-party patent that we believe may have applicability in our field, and any other third-party patent that may at some future time possibly be asserted against us. Such challenges may be brought either in court or by requesting that the USPTO, European Patent Office (“EPO”), or other foreign patent offices review the patent claims, such as in an ex-parte reexamination, inter partes review, post-grant review proceeding or opposition proceeding or other similar proceedings. However, there can be no assurance that any such challenge by us or any third party will be successful. Even if such proceedings are successful, these proceedings are expensive and may consume our time or other resources, distract our management and technical personnel, and the costs of these opposition proceedings could be substantial. There can be no assurance that our defenses of non-infringement, invalidity or unenforceability will succeed.

Third parties, including our competitors, could be infringing, misappropriating or otherwise violating our solely owned and/or in-licensed intellectual property rights. Monitoring unauthorized use of intellectual property is difficult and costly. We may not be able to detect unauthorized use of, or take appropriate steps to enforce, our intellectual property rights. From time to time, we seek to analyze our competitors’ products and services, and may in the future seek to enforce our rights based on potential infringement, misappropriation or violation of our intellectual property. However, the steps we take to protect our intellectual property rights may not be adequate to enforce our rights against such infringement, misappropriation or violation of our intellectual property. Any inability to meaningfully enforce our intellectual property rights could harm our ability to compete and reduce demand for our products and technologies.

Litigation proceedings may be necessary for us to enforce our patent and other intellectual property rights. In any such proceeding, a court may refuse to stop the other party from using the technology at issue on the grounds that our owned and in-licensed patents do not cover the technology in question. Further, in such a proceeding, the defendant could counterclaim that our intellectual property is invalid or unenforceable and the court may agree, in which case we could lose valuable intellectual property rights, which could allow third parties to commercialize technology or products similar to ours and compete directly with us, without payment to us. Alternatively or additionally such a proceeding could result in requiring us to license rights from the prevailing party in order to be able to manufacture or commercialize our products without infringing such party’s intellectual property rights, and if we are unable to obtain such a license, we may be required to cease commercialization of our products and technologies, any of which could have a material adverse effect on our business, financial condition, results of operations and prospects. The outcome in any such proceeding is somewhat unpredictable.

Regardless of whether we are defending against or asserting an intellectual property-related claim in an intellectual property-related proceeding that may be necessary in the future, and regardless of outcome, substantial costs and diversion of resources may result which could have a material adverse effect on our business, financial condition, results of operations and prospects. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. In addition, there could be public announcements of the results of hearings, motions, or other interim proceedings or developments, and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our Class A common stock. Some of our competitors and other third parties may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their greater financial resources and more mature and developed intellectual property portfolios. We may not have sufficient financial or other resources to adequately conduct these types of litigation or proceedings. Any of the foregoing, or any uncertainties resulting from the initiation and continuation of any litigation, could have a material adverse effect on our business, financial condition, results of operations and prospects. Claims that we have misappropriated the confidential information or trade secrets of third parties could have a similar adverse effect on our business, financial condition, results of operations and prospects.

67

Obtaining and maintaining our patent protection depends on compliance with various required procedures, document submissions, fee payments and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

Periodic maintenance fees, renewal fees, annuity fees and various other governmental fees on patents and/or applications will be due to be paid to the USPTO and various governmental patent agencies outside of the United States at several stages over the lifetime of the patents and/or applications. The USPTO and various non-U.S. governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In certain circumstances, we rely on our licensors to pay these fees due to the U.S. and non-U.S. patent agencies and to take the necessary action to comply with these requirements with respect to our licensed intellectual property. In many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which non-compliance can result in an irrevocable abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors may be able to enter the market without infringing our patents and this circumstance could have a material adverse effect on our business, financial condition, results of operations and prospects.

We currently rely on licenses from third parties, and in the future may rely on additional licenses from other third parties, and if we lose any of these licenses, then we may be subjected to future litigation.

We are, and may in the future become, a party to license agreements that grant us rights to use certain intellectual property, including patents and patent applications, typically in certain specified fields of use. We may need to obtain additional licenses from others to advance our research, development and commercialization activities.

Our success may depend in part on the ability of our licensors and any future licensors to obtain, maintain and enforce patent protection for our licensed intellectual property. Without protection for the intellectual property we license, other companies might be able to offer substantially identical products and technologies for sale, which could materially adversely affect our competitive business position and harm our business, financial condition, results of operations and prospects.

Our current license agreements impose, and future agreements may impose, various diligence, commercialization, milestone payment, royalty, insurance and other obligations on us and require us to meet development timelines, or to exercise commercially reasonable efforts to develop and commercialize licensed products, in order to maintain the licenses. If we fail to comply with these obligations, our licensor(s) may have the right to terminate our license, in which event we would not be able to develop or market products or technology covered by the licensed intellectual property. Any of the foregoing could have a material adverse effect on our competitive position, business, financial conditions, results of operations and prospects.

Moreover, disputes may also arise between us and our licensors regarding intellectual property subject to a license agreement, including:

If we do not prevail in such disputes, we may lose any or all of our rights under such license agreements, experience significant delays in the development and commercialization of our products and technologies, or incur liability for damages, any of which could have a material adverse effect on our business, financial condition, results of operations, and prospects. In addition, we may seek to obtain additional licenses from our licensor(s) and, in connection with obtaining such licenses, we may agree to amend our existing licenses in a manner that may be more favorable to the licensor(s), including by agreeing to terms that could enable third parties, including our competitors, to receive licenses to a portion of the intellectual property that is subject to our existing licenses and to compete with our products.

68

In addition, the agreements under which we currently and in the future license intellectual property or technology from third parties are complex and certain provisions in such agreements may be susceptible to multiple interpretations. The resolution of any contract interpretation disagreement that may arise could narrow what we believe to be the scope of our rights to the relevant intellectual property or technology, or increase what we believe to be our financial or other obligations under the relevant agreement, either of which could have a material adverse effect on our business, financial condition, results of operations and prospects. Moreover, if disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on commercially acceptable terms, we may be unable to successfully develop and commercialize any affected products or services, which could have a material adverse effect on our business, financial condition, results of operations and prospects.

Absent the license agreements, we may infringe patents subject to those agreements, and if the license agreements are terminated, we may be subject to litigation by the licensor. Litigation could result in substantial costs and distract our management. If we do not prevail, we may be required to pay damages, including treble damages, attorneys’ fees or costs and expenses and royalties, which could adversely affect our ability to offer products or services, our ability to continue operations and our business, financial condition, results of operations and prospects.

If we cannot license rights to use technologies on reasonable terms, we may not be able to commercialize new products in the future.

We may identify third-party technology that we may need to license or acquire in order to develop or commercialize our products or technologies. However, we may be unable to secure such licenses or acquisitions. The licensing or acquisition of third-party intellectual property rights is a competitive area, and several more established companies may pursue strategies to license or acquire third-party intellectual property rights that we may consider attractive or necessary. These established companies may have a competitive advantage over us due to their size, capital resources and greater clinical development and commercialization capabilities. In addition, companies that perceive us to be a competitor may be unwilling to assign or license rights to us.

We also may be unable to license or acquire third-party intellectual property rights on terms that would allow us to make an appropriate return on our investment or at all. In return for the use of a third party’s technology, we may agree to pay the licensor royalties based on sales of our products or services. Royalties are a component of cost of products or technologies and affect the margins on our products. We may also need to negotiate licenses to patents or patent applications before or after introducing a commercial product. We may not be able to obtain necessary licenses to patents or patent applications, and our business may suffer if we are unable to enter into the necessary licenses on acceptable terms or at all, if any necessary licenses are subsequently terminated, if the licensor fails to abide by the terms of the license or fails to prevent infringement by third parties, or if the licensed intellectual property rights are found to be invalid or unenforceable.

Certain of our in-licensed patents are, and our future owned and in-licensed patents may be, subject to a reservation of rights by one or more third parties, including government march-in rights, that may limit our ability to exclude third parties from commercializing products similar or identical to ours.

In addition, our owned and in-licensed patents may be subject to a reservation of rights by one or more third parties. When new technologies are developed with government funding, in order to secure ownership of such patent rights, the recipient of such funding is required to comply with certain government regulations, including timely disclosing the inventions claimed in such patent rights to the U.S. government and timely electing title to such inventions. Any failure to timely elect title to such inventions may permit the U.S. government to, at any time, take title to such inventions. Additionally, the U.S. government generally obtains certain rights in any resulting patents, including a non-exclusive royalty-free license authorizing the government to use the invention or to have others use the invention on its behalf. If the government decides to exercise these rights, it is not required to engage us as its contractor in connection with doing so. In addition, these rights may permit the U.S. government to disclose our confidential information to third parties and to exercise march-in rights to use or allow third parties to use our licensed technology free of charge. The U.S. government can exercise its march-in rights if it determines that action is necessary because we fail to achieve practical application of the government-funded technology, because action is necessary to alleviate health or safety needs, to meet requirements of federal regulations, or to give preference to U.S. industry. In addition, our rights in such inventions may be subject to certain requirements to manufacture products embodying such inventions in the United States. Any exercise by the government of any of the foregoing rights could have a material adverse effect on our business, financial condition, results of operations and prospects.

69

Our products contain third-party open source software components and failure to comply with the terms of the underlying open source software licenses could restrict our ability to sell our products and provide third parties access to our proprietary software.

Our products may contain software licensed by third parties under open source software licenses. Use and distribution of open source software may entail greater risks than use of third-party commercial software, as open source software licensors generally do not provide warranties or other contractual protections regarding infringement claims or the quality of the code. Some open source software licenses contain requirements that the licensee make its source code publicly available if the licensee creates modifications or derivative works using the open source software, depending on the type of open source software the licensee uses and how the licensee uses it. If we combine our proprietary software with open source software in a certain manner, we could, under certain open source software licenses, be required to release the source code of our proprietary software to the public for free. This would allow our competitors and other third parties to create similar products with less development effort and time and ultimately could result in a loss of our product sales and revenue, which could have a material adverse effect on our business, financial condition, results of operations and prospects. In addition, some companies that use third-party open source software have faced claims challenging their use of such open source software and their compliance with the terms of the applicable open source license. We may be subject to suits by third parties claiming ownership of what we believe to be open source software, or claiming non-compliance with the applicable open source licensing terms. Use of open source software may also present additional security risks because the public availability of such software may make it easier for hackers and other third parties to compromise or attempt to compromise our technology and systems.

Although we review our use of open source software to avoid subjecting our proprietary software to conditions we do not intend, the terms of many open source software licenses have not been interpreted by United States courts, and there is a risk that these licenses could be construed in a way that could impose unanticipated conditions or restrictions on our ability to commercialize our products and proprietary software. Moreover, our processes for monitoring and controlling our use of open source software in our products may not be effective. If we are held to have breached the terms of an open source software license, we could be subject to damages or be required to seek licenses from third parties to continue offering our products on terms that are not economically feasible, to re-engineer our products, to discontinue the sale of our products if re-engineering could not be accomplished on a timely basis, or to make generally available, in source code form, our proprietary code, any of which could adversely affect our business, financial condition, results of operations and prospects.

Intellectual property rights do not necessarily address all potential threats.

The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations, and may not adequately protect our business or permit us to maintain our competitive advantage. For example:

70

Should any of these events occur, they could materially adversely affect our business, financial condition, results of operations and prospects.

Litigation Risks

We face the risk of product liability claims and may be subject to damages, fines, penalties and injunctions, among other things.

Our business exposes us to the risk of product liability claims that are inherent in the testing, manufacturing and marketing of medical devices, including those which may arise from the misuse (including system hacking or other unauthorized access by third parties to our systems) or malfunction of, or design flaws in, our hardware and software products. This liability may vary based on the FDA classification associated with our devices and with the state law governing product liability standards applied to specification developers and/or manufacturers in a given negligence or strict liability lawsuit. We may be subject to product liability claims if our products cause, or merely appear to have caused, an injury. Claims may be made by patients, healthcare providers or others selling our products. The risk of product liability claims may also increase if our products are subject to a product recall or seizure. Product liability claims may be brought by individuals or by groups seeking to represent a class.

Although we have insurance at levels that we believe to be appropriate, this insurance is subject to deductibles and coverage limitations. Our current product liability insurance may not continue to be available to us on acceptable terms, if at all, and, if available, the coverage may not be adequate to protect us against any future product liability claims. Further, if additional medical device products are approved or cleared for marketing, or if we launch additional 510(k)-exempt device products or products that are not FDA-regulated medical devices, we may seek additional insurance coverage. If we are unable to obtain insurance at an acceptable cost or on acceptable terms with adequate coverage or otherwise protect against potential product liability claims, we will be exposed to significant liabilities, which may harm our business. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could result in significant costs and significant harm to our business.

We may be subject to claims against us even if the apparent injury is due to the actions of others or misuse of the device or a partner device. Healthcare providers may use our products in a manner inconsistent with the products’ labeling and that differs from the manner in which they were used in clinical studies and authorized by the FDA. Off-label use of products by healthcare providers is common, and any such off-label use of our products could subject us to additional liability, or require design changes to limit this potential off-label use once discovered. Defending a suit, regardless of merit, could be costly, could divert management attention and might result in adverse publicity, which could result in the withdrawal of, or result in reduced acceptance of, our products in the market.

Additionally, we have entered into various agreements where we indemnify third parties for certain claims relating to our products. These indemnification obligations may require us to pay significant sums of money for claims that are covered by these indemnification obligations. We are not currently subject to any product liability claims; however, any future product liability claims against us, regardless of their merit, may result in negative publicity about us that could ultimately harm our reputation and could have a material adverse effect on our business, financial condition, results of operations and prospects.

Risks Related to Our Securities and to Being a Public Company

We identified material weaknesses in our internal control over financial reporting. If our remediation measures are ineffective, or if we experience additional material weaknesses in the future or otherwise fail to maintain an effective system of internal controls in the future, we may not be able to report our financial condition or results of operations accurately or in a timely manner and we may be unable to maintain compliance with applicable stock exchange listing requirements, which may adversely affect investor confidence in us and, as a result, materially and adversely affect our business and the value of our Class A common stock.

In connection with Legacy Hyperfine’s and Liminal’s combined financial statement close process for the years ended December 31, 2020 and 2019, we identified a material weakness in our internal control over financial reporting. We outsourced our accounting and financial reporting to 4Catalyzer and as of and during the years ended December 31, 2020 and

71

2019, did not have our own finance function to appropriately perform the supervision and review of the information received from 4Catalyzer and assess its reasonableness and accuracy.

In addition, HealthCor previously recorded a portion of its Class A ordinary shares subject to possible redemption in permanent equity. Notwithstanding the presence of maximum redemption thresholds or charter provisions common in SPACs that provide a limitation on redemptions that would cause a SPAC’s net tangible assets to be less than $5,000,001, in accordance with SEC Staff guidance on redeemable equity instruments, ASC 480-10-S99, “Distinguishing Liabilities from Equity”, and EITF Topic D-98, “Classification and Measurement of Redeemable Securities”, and, according to the SEC Staff communications with certain independent auditors, redemption provisions not solely within the control of the issuing company require ordinary shares subject to redemption to be classified outside of permanent equity. Although HealthCor did not specify a maximum redemption threshold in its Articles and Restated Memorandum and Articles of Association (the “HealthCor Articles”), the HealthCor Articles provided that HealthCor could not redeem its Public Shares in an amount that would cause its net tangible assets to be less than $5,000,001. In light of the recent SEC Staff communications with certain independent auditors, HealthCor’s management re-evaluated the effectiveness of its disclosure controls and procedures as of September 30, 2021. Based upon that evaluation, HealthCor concluded that the misclassification of the Class A ordinary shares was quantitatively material to individual line items within the balance sheet. This resulted in a restatement of the initial carrying value of the Class A ordinary shares subject to possible redemption, with the offset recorded to additional paid-in capital (to the extent available), accumulated deficit and ordinary shares.

The foregoing represents a material weakness in our internal controls over financial reporting. A “material weakness” is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented, or detected and corrected on a timely basis.

In light of the material weakness identified and the resulting restatement, we plan to enhance our processes to identify and appropriately apply applicable accounting requirements to better evaluate and understand the nuances of the complex accounting standards that apply to our financial statements. Our management is in the process of developing a remediation plan, which includes, without limitation, the hiring of additional accounting and finance personnel with technical public company accounting and financial reporting experience. The material weaknesses will not be considered remediated until management designs and implements effective controls that operate for a sufficient period of time and management has concluded through testing that these controls are effective.

The elements of our remediation plan can only be accomplished over time, and we can offer no assurance that these initiatives will ultimately have the intended effects or that other material weaknesses and control deficiencies will not be discovered in the future.

If our efforts are not successful or other material weaknesses or control deficiencies occur in the future, we may be unable to report our financial results accurately on a timely basis or help prevent fraud, which could cause our reported financial results to be materially misstated and result in the loss of investor confidence or delisting and cause the market price of our shares to decline. We cannot assure you that the initiatives we have taken to date, or any initiatives we may take in the future, will be sufficient to avoid potential future material weaknesses.

Because we are a “controlled company” within the meaning of the Nasdaq listing rules, our stockholders may not have certain corporate governance protections that are available to stockholders of companies that are not controlled companies.

So long as more than 50% of the voting power for the election of our directors is held by an individual, a group or another company, we will qualify as a “controlled company” under the Nasdaq listing rules. As of February 15, 2022, Dr. Rothberg controls approximately 84.8% of the voting power of our outstanding capital stock. As a result, we are a “controlled company” under the Nasdaq rules and are not subject to the requirements that would otherwise require us to have: (i) a majority of our board of directors consist of independent directors; (ii) director nominees selected, or recommended for our board of directors’ selection, either by a majority of the independent directors or a nominating committee comprised solely of independent directors; and (iii) a compensation committee comprised solely of independent directors.

Dr. Rothberg may have his interest in the Company diluted due to future equity issuances or his own actions in selling shares of our Class B common stock, in each case, which could result in a loss of the “controlled company” exemption under the Nasdaq listing rules. We would then be required to comply with those provisions of the Nasdaq listing rules.

72

The dual class structure of our common stock has the effect of concentrating voting power with Jonathan M. Rothberg, Ph.D., Vice Chairman of our board of directors and the Founder of Legacy Hyperfine and Liminal, which will limit an investor’s ability to influence the outcome of important transactions, including a change in control.

Shares of our Class B common stock have 20 votes per share, while shares of our Class A common stock have one vote per share. Dr. Rothberg holds all of the issued and outstanding shares of our Class B common stock, and as of February 15, 2022, Dr. Rothberg holds approximately 84.8% of the voting power of our capital stock and is able to control matters submitted to our stockholders for approval, including the election of directors, amendments of our organizational documents and any merger, consolidation, sale of all or substantially all of our assets or other major corporate transactions. Dr. Rothberg may have interests that differ from yours and may vote in a way with which you disagree and which may be adverse to your interests. This concentrated control may have the effect of delaying, preventing or deterring a change in control of the Company, could deprive our stockholders of an opportunity to receive a premium for their capital stock as part of a sale of the Company, and might ultimately affect the market price of shares of our Class A common stock. If additional shares of our Class B common stock are issued, your shares and your votes may be significantly diluted.

Potential conflicts of interest may arise among the holders of our Class B common stock and the holders of our Class A common stock.

Dr. Rothberg holds all of our Class B common stock following the Business Combination. As a result, conflicts of interest may arise among Dr. Rothberg, on the one hand, and the Company and holders of our Class A common stock on the other hand. Dr. Rothberg has the ability to influence our business and affairs through his ownership of the high vote shares of our common stock, his general ability to elect our board of directors, and provisions in the Charter requiring his approval for certain corporate actions (in addition to approval by our board of directors). If the holders of our Class A common stock are dissatisfied with the performance of our board of directors, they have no ability to remove any of our directors, with or without cause.

Further, through his ability to elect our board of directors and as well as his service on our board of directors, Dr. Rothberg has the ability to influence the determination of the amount and timing of our investments and dispositions, cash expenditures, indebtedness, issuances of shares of common stock, tax liabilities and amounts of reserves.

Delaware law and provisions in our Charter and bylaws could make a takeover proposal more difficult.

Our organizational documents are governed by Delaware law. Certain provisions of Delaware law and of our Charter and bylaws could discourage, delay, defer or prevent a merger, tender offer, proxy contest or other change of control transaction that a stockholder might consider in its best interest, including those attempts that might result in a premium over the market price for the shares of our Class A common stock held by our stockholders. These provisions provide for, among other things:

73

These anti-takeover provisions as well as certain provisions of Delaware law could make it more difficult for a third party to acquire the Company, even if the third party’s offer may be considered beneficial by many of our stockholders. As a result, our stockholders may be limited in their ability to obtain a premium for their shares. If prospective takeovers are not consummated for any reason, we may experience negative reactions from the financial markets, including negative impacts on the price of our Class A common stock. These provisions could also discourage proxy contests and make it more difficult for our stockholders to elect directors of their choosing and to cause us to take other corporate actions that our stockholders desire.

Our Charter designates the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain types of actions and proceedings and the federal district courts as the sole and exclusive forum for other types of actions and proceedings, in each case, that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain what such stockholders believe to be a favorable judicial forum for disputes with the Company or our directors, officers or other employees.

Our Charter provides that, unless we consent to the selection of an alternative forum, any (i) derivative action or proceeding brought on behalf of us; (ii) action asserting a claim of breach of a fiduciary duty owed by, or any other wrongdoing by, any current or former director, officer, other employee or stockholder of us; (iii) action asserting a claim against us arising pursuant to any provision of the DGCL or our Charter or our bylaws or as to which the DGCL confers jurisdiction on the Court of Chancery; (iv) action to interpret, apply, enforce, or determine the validity of any provisions in the certificate of incorporation of bylaws; or (v) action asserting a claim governed by the internal affairs doctrine, shall, to the fullest extent permitted by law, be exclusively brought in the Court of Chancery of the State of Delaware or, if such court does not have subject matter jurisdiction thereof, the federal district court of the State of Delaware. Subject to the foregoing, the federal district courts of the United States are the exclusive forum for the resolution of any action, suit or proceeding asserting a cause of action under the Securities Act. The exclusive forum provision does not apply to suits brought to enforce any liability or duty created by the Exchange Act. Any person or entity purchasing or otherwise acquiring or holding an interest in any shares of our capital stock shall be deemed to have notice of and to have consented to the forum provisions in our Charter. These choice-of-forum provisions may limit a stockholder’s ability to bring a claim in a judicial forum that he, she or it believes to be favorable for disputes with the Company or our directors, officers or other employees or stockholders, which may discourage such lawsuits. We note that there is uncertainty as to whether a court would enforce these provisions and that investors cannot waive compliance with the federal securities laws and the rules and regulations thereunder. Section 22 of the Securities Act creates concurrent jurisdiction for state and federal courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder.

Alternatively, if a court were to find these provisions of our Charter inapplicable or unenforceable with respect to one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could materially adversely affect our business, financial condition and results of operations and result in a diversion of the time and resources of our management and board of directors.

The Charter does not limit the ability of the Sponsor to compete with the Company.

HealthCor's sponsor, HC Sponsor LLC (the "Sponsor") and its affiliates engage in a broad spectrum of activities, including investments in the life sciences and medical technology industries. In the ordinary course of their business activities, the Sponsor and its affiliates may engage in activities where their interests conflict with our interests or those of our stockholders. The Charter does not provide that the Sponsor and its affiliates have any duty to refrain from engaging, directly or indirectly, in the same business activities or similar business activities or lines of business in which we operate. The Sponsor and its affiliates also may pursue acquisition opportunities that may be complementary to our business, and, as a result, those acquisition opportunities may not be available to the Company. In addition, the Sponsor may have an interest in pursuing acquisitions, divestitures and other transactions that, in its judgment, could enhance its investment, even though such transactions might involve risks to you.

We are an emerging growth company and a smaller reporting company within the meaning of the Securities Act, and we may take or continue to take advantage of certain exemptions from disclosure requirements available to emerging growth companies or smaller reporting companies, which could make our securities less attractive to investors and may make it more difficult to compare our performance with other public companies.

We are an “emerging growth company” within the meaning of the Securities Act, as modified by the JOBS Act, and we may take or continue to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a

74

nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. As a result, our stockholders may not have access to certain information they may deem important. We could be an emerging growth company for up to five years, although circumstances could cause us to lose that status earlier, including if the market value of our Class A common stock held by non-affiliates is $700 million or more as of the last business day of the most recently completed second fiscal quarter, in which case we would no longer be an emerging growth company as of the end of that fiscal year. We cannot predict whether investors will find our securities less attractive because we will rely on these exemptions. If some investors find our securities less attractive as a result of our reliance on these exemptions, the trading prices of our securities may be lower than they otherwise would be, there may be a less active trading market for our securities and the trading prices of our securities may be more volatile.

Further, Section 102(b)(1) of the JOBS Act exempts emerging growth companies from being required to comply with new or revised financial accounting standards until private companies (that is, those that have not had a Securities Act registration statement declared effective or do not have a class of securities registered under the Exchange Act) are required to comply with the new or revised financial accounting standards. The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies but any such election to opt out is irrevocable. We have elected not to opt out of such extended transition period which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can adopt the new or revised standard at the time private companies adopt the new or revised standard. This may make comparison of our financial statements with another public company which is not an emerging growth company or is an emerging growth company which has opted out of using the extended transition period difficult or impossible because of the potential differences in accountant standards used.

Additionally, we are a “smaller reporting company” as defined in Item 10(f)(1) of Regulation S-K. Smaller reporting companies may take advantage of certain reduced disclosure obligations, including, among other things, providing only two years of audited financial statements. We are required to reflect a determination that we are no longer a smaller reporting company in our quarterly report on Form 10-Q for the first fiscal quarter of the next fiscal year after the fiscal year in which (i) the market value of our common stock held by non-affiliates is greater than or equal to $250 million as of the end of that fiscal year’s second fiscal quarter, and (ii) if our annual revenues are not greater than or equal to $100 million during the last completed fiscal year, the market value of our common stock held by non-affiliates is $700 million or more as of the end of that fiscal year’s second fiscal quarter. To the extent we take advantage of such reduced disclosure obligations, it may also make comparison of our financial statements with other public companies difficult or impossible.

Reports published by analysts, including projections in those reports that differ from our actual results, could adversely affect the price and trading volume of our Class A common stock.

Securities research analysts may establish and publish their own periodic projections for us. Those projections may vary widely and may not accurately predict the results we actually achieve. Our share price may decline if our actual results do not match the projections of these securities research analysts. Similarly, if one or more of the analysts who write reports on us downgrades our stock or publishes inaccurate or unfavorable research about our business, our share price could decline. In addition, securities research analysts may compare us to companies that are not appropriately comparable, which could lead to lower than expected valuations. If one or more analysts cease coverage of us or fail to publish reports on us regularly, our share price or trading volume could decline.

Our business and operations could be negatively affected if we become subject to any securities litigation or shareholder activism, which could cause us to incur significant expense, hinder execution of our business and growth strategy and impact our stock price.

In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been brought against that company. Shareholder activism, which could take many forms or arise in a variety of situations, has been increasing recently. Volatility in the stock price of our Class A common stock or other reasons may in the future cause us to become the target of securities litigation or shareholder activism. Securities litigation and shareholder activism, including potential proxy contests, could result in substantial costs and divert management’s and the board of directors’ attention and resources from our business. Additionally, such securities litigation and shareholder activism could give rise to perceived uncertainties as to our future, adversely affect our relationships with service providers and make it more difficult to attract and retain qualified personnel. Also, we may be required to incur significant legal fees and other expenses related to any securities litigation and activist shareholder matters. Further, our stock price could be subject to significant fluctuation or otherwise be adversely affected by the events, risks and uncertainties of any securities litigation and shareholder activism.

75

The grant of registration rights pursuant to the Registration Rights Agreement, the PIPE Subscription Agreements and the Letter Agreement, and the future exercise of such rights, may adversely affect the market price of our Class A common stock.

At the Closing, we, the Sponsor, certain affiliates of the Sponsor and certain stockholders of Legacy Hyperfine and Liminal entered into the Registration Rights Agreement, pursuant to which, among other things, the parties to the Registration Rights Agreement agreed not to effect any sale or distribution of any our equity securities held by any of them (except with respect to shares of our Class A common stock acquired in open market transactions or pursuant to the PIPE Investment) during the respective lock-up period described therein and were granted certain registration rights with respect to their respective shares of our common stock, in each case, on the terms and subject to the conditions therein. The parties to the Registration Rights Agreement and their permitted transferees have customary registration rights (including demand and piggy-back rights, subject to cooperation and cut-back provisions). In particular, the Registration Rights Agreement provides that promptly, but in any event within forty-five (45) days following the Closing Date, we are required to use our commercially reasonable efforts to file a registration statement under the Securities Act to permit the public resale of all registrable securities as permitted by Rule 415 of the Securities Act and to cause such registration statement to be declared effective as soon as practicable after the filing thereof, but in no event later than forty-five (45) days following the filing deadline (or sixty (60) days following the filing deadline if the registration statement is reviewed by and receives comments from the Securities and Exchange Commission (the “SEC”)). The registration statement was filed on January 24, 2022 and declared effective by the SEC on February 1, 2022.

Further, pursuant to the Subscription Agreements and the Letter Agreement, we agreed (i) to file within 45 days after the closing of the Business Combination a registration statement with the SEC for the resale of the PIPE Securities by the PIPE Investors and the Letter Agreement Shares by Jefferies LLC, (ii) to use commercially reasonable efforts to cause such registration statement to be declared effective as soon as practicable after the filing thereof, but no later than the earlier of (a) the 45th calendar day (or 60th calendar day if the SEC notifies us that it will “review” the registration statement) and (b) the 10th business day after the date we are notified (orally or in writing, whichever is earlier) by the SEC that the registration statement will not be “reviewed” or will not be subject to further review and (iii) to maintain the effectiveness of such registration statement until the earlier of (a) five years from the date of effectiveness of the initial registration statement, (b) the date on which PIPE Investors cease to hold the securities covered thereby, and (c) the date all of the securities covered thereby can be sold publicly without restriction or limitation under Rule 144 under the Securities Act. We will bear the cost of registering these securities. The registration statement was filed on January 24, 2022 and declared effective by the SEC on February 1, 2022. The registration and availability of such a significant number of securities for trading in the public market may have an adverse effect on the market price of our Class A common stock.

The obligations associated with being a public company will involve significant expenses and will require significant resources and management attention, which may divert from our business operations.

As a public company, we are subject to the reporting requirements of the Exchange Act and the Sarbanes-Oxley Act. The Exchange Act requires the filing of annual, quarterly and current reports with respect to a public company’s business and financial condition. The Sarbanes-Oxley Act requires, among other things, that a public company establish and maintain effective internal control over financial reporting. As a result, we are incurring, and will continue to incur significant legal, accounting and other expenses that Legacy Hyperfine and Liminal did not previously incur. Our management team and many of our other employees will need to devote substantial time to compliance, and may not effectively or efficiently manage our transition into a public company.

We do not intend to pay cash dividends for the foreseeable future.

We currently intend to retain our future earnings, if any, to finance the further development and expansion of our business and do not intend to pay cash dividends in the foreseeable future. Any future determination to pay dividends will be at the discretion of our board of directors and will depend on our financial condition, results of operations, capital requirements, and future agreements and financing instruments, business prospects and such other factors as our board of directors deems relevant.

76

Item 1B. UNRESOLVED STAFF COMMENTS

None.

Item 2. PROPERTIES

We currently maintain our principal executive offices at 351 New Whitfield Street, Guilford, Connecticut 06437. We also occupy office and laboratory space in Palo Alto, California. We lease office space under operating leases. We consider our current office space adequate for our current operations.

Item 3. LEGAL PROCEEDINGS

We are not currently a party to any material legal proceedings.

Item 4. MINE SAFETY DISCLOSURES

Not applicable.

77

PART II

Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Prior to the closing of the Business Combination on December 22, 2021, HealthCor's Class A ordinary shares were traded on Nasdaq under the symbol "HCAQ". On December 22, 2021, in connection with the closing of the Business Combination, we changed our name to "Hyperfine, Inc." On December 23, 2021, our Class A common stock began trading on the Nasdaq Global Market under the symbol “HYPR”.

Stockholders

As of February 15, 2022, we had 55,277,061 outstanding shares of Class A common stock held by approximately 199 holders of record, 15,055,288 outstanding shares of Class B common stock held by approximately two holders of record, and no outstanding shares of preferred stock.

Unregistered Sales of Securities

Not applicable.

Issuer Purchases of Equity Securities

Not applicable.

Item 6. [RESERVED]

Not applicable.

78

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS OF HYPERFINE

The following discussion and analysis of the financial condition and results of operations Hyperfine, Inc. and its subsidiaries (for purposes of this section, collectively referred as the “Company”, “we,” “us” and “our”) should be read together with the audited combined and consolidated financial statements as of and for the years ended December 31, 2021 and 2020, together with the related notes thereto, included elsewhere in this Annual Report on Form 10-K. This discussion contains forward-looking statements and involves numerous risks and uncertainties, including, but not limited to, those described under the heading “Risk Factors.” Actual results may differ materially from those contained in any forward-looking statements.

Overview

We are an innovative digital health business with a mission to provide affordable and accessible imaging and monitoring through magnetic resonance imaging (“MRI”) to revolutionize healthcare for people around the world. Our Swoop® Portable Magnetic Resonance (“MR”) Imaging SystemTM (“Swoop”) produces high-quality images at a lower magnetic field strength than conventional MRI systems, and can be used by healthcare professionals to make effective clinical diagnoses on a patient in a variety of settings where MRI devices have previously been inaccessible. The easy-to-use interface and portable design of our Swoop system make it accessible for use anywhere in a hospital, clinic or patient care site. We are working to realize our vision of providing affordable and accessible imaging of health conditions around the world.

MRI is a medical imaging technique used in radiology to image the anatomy and the physiological processes of the human body. It is typically used in a variety of clinical settings for medical diagnosis, staging of disease and follow-up treatment. Unlike X-ray computed tomography (“CT”) or positron emission tomography (“PET”), MRI does not expose patients to harmful ionizing radiation. We believe MRI offers the most sensitive and objective measures of brain tissue and injury. Despite its advantages, many healthcare institutions throughout the world lack the facilities, qualified operators and capital necessary to acquire and maintain expensive MRI devices. The Swoop system is intended for use at the patient’s bedside in any hospital room or clinical setting, such as a physician’s office or a local urgent care facility. The demand for MRI has been augmented by the aging population and rising prevalence of cancer and cardiovascular, neurological and orthopedic conditions. Healthcare professionals and insurers are recognizing imaging as a cost-effective and non-invasive diagnostic tool for evaluation and ongoing monitoring. Swoop is a next generation of these devices designed to drive costs down and expand the current $15.9 billion imaging market.

We believe the adoption of the Swoop system by healthcare professionals has benefits across healthcare communities in both high and low resource settings. Through our collaborations with the healthcare community, we have begun to optimize Hyperfine’s software ecosystem to harness Artificial Intelligence (“AI”) to transform the system into a true bedside clinical decision support platform. These efforts seek to improve image quality, help users analyze images, and reduce time to diagnosis. Our technology allows us to provide decision support and immediate feedback for diagnostic insight for clinicians of all levels of expertise. In the future, we hope to develop an ecosystem of products, expanding the capabilities of our core MRI product platform while introducing a brain sensing platform to offer a more complete solution and increase access to life saving technology across the care continuum.

Legacy Hyperfine received 510(k) clearance from the U.S. Food and Drug Administration (“FDA”) in 2020 for its Swoop Portable MR Imaging System, which is commercially available in the United States. In 2021, we also obtained a Medical Device License issued by Health Canada and expanded into the Canadian market. We also recently received regulatory authorization in New Zealand and Pakistan. In addition, we are initially seeking necessary regulatory authorizations in other major markets, including the United Kingdom, Australia and other countries. We are building our direct commercial infrastructure in the United States and also have plans to sell our products in other countries either through direct sales or through distributors.

COVID-19

In March 2020, the World Health Organization declared the global outbreak of COVID-19 to be a pandemic. We continue to closely monitor the recent developments surrounding the continued spread and potential resurgence of COVID-19. The COVID-19 pandemic has had, and is expected to continue to have, an adverse impact on our operations, particularly as a result of preventive and precautionary measures that we, other businesses, and governments are taking.

COVID-19 created multiple commercial challenges in 2020 and has continued to do so in 2021 and 2022. We expect to see restrictions on our salesforce’s ability to visit sites to continue during 2022. Commercially, many hospitals and other healthcare providers decreased spending and limited physical access to facilities, slowing our ability to demonstrate our

79

Swoop device. In addition, many hospitals and other healthcare providers continue to focus their attention on addressing COVID-19, which we believe has resulted in lower sales volume. Trade shows and conferences moved to a virtual platform creating difficulty in demonstrating our device to key stakeholders. We moved to create a product demonstration roadshow using demonstration trucks, but were not able to scale due to truck shortages. It was not uncommon to host virtual product demonstrations with 6-10 physicians, something that would ordinarily not happen or would take many weeks of planning to produce. With physician society conferences offline and slowing our commercial launch, we used the concept of “Demo at Your Door” — providing target customers hands-on device experience at a place of their choosing. Virtual demonstrations, even though they generated a lot of interest in our product, often did not result in sales, and all sales required an in-person product demonstration. As more conferences begin to be held in-person, we expect to improve our ability to provide product demonstrations to potential customers. It is unclear whether or not conferences will have the same in-person attendance as they would have had in the past.

Because the manufacturing of our Swoop system was developed, and our commercial launch of our Swoop system occurred, during the COVID-19 pandemic market and manufacturing conditions, we did not have to materially adjust our existing resource allocation or our factors of production because of the COVID-19 pandemic. However, if there are further waves of the COVID-19 pandemic driven by variants like Delta, Omicron or otherwise, we may experience a greater negative impact in our supply chain than we have previously.

During the COVID-19 pandemic and the variants that followed, our suppliers agreed to shift new work to domestic suppliers to help reduce the risk of manufacturing delays. Our supplier and sub tier suppliers have been adversely affected by COVID-19. Although we work closely with our suppliers to attempt to ensure continuity of supply, the supply of certain components and raw materials used in our product has been and may continue to be slowed as a direct result of COVID-19 and its variants. We have also experienced increases in product costs as raw materials have been constrained. Prices have risen sharply over the past year, and lead times have extended dramatically, particularly on semiconductor products. Over the next 12 months, we expect prices to increase due to the raw material demand surges across numerous industries, along with labor and transportation related constraints. We also expect lead times to reduce as component production levels recover to meet demand. We helped to minimize the impact of the COVID-19 pandemic on the manufacturing of our product and operations by using our manufacturer’s preferred suppliers, increasing communications with suppliers and freight carriers, and providing advanced forecasts and purchase orders for new and existing devices.

In addition, future regulatory authorizations by the FDA or other regulatory authorities may take longer because of COVID-19 pandemic-related delays, though we have not been impacted by such delays to date.

Please refer to the section titled, "Item 1A. Risk Factors” included elsewhere in this Annual Report on Form 10-K for more information. We are unable to predict the full impact that the COVID-19 pandemic will have on our future results of operations, liquidity and financial condition due to numerous uncertainties, including the duration of the pandemic and actions that may be taken by government authorities across the United States. We will continue to monitor the performance of our business and reassess the impacts of COVID-19.

Key Performance Metrics

We review the key performance measures discussed below to evaluate the business and measure performance, identify trends, formulate plans and make strategic decisions.

Installed Base

The Swoop total installed base consists of three components, discussed in further detail below: Commercial system installations (which make up total revenue), grant fulfillment installations, and research unit installations. The Swoop total installed base (or total installed units) is the number of Swoop devices deployed to hospitals, other healthcare providers, and research institutions. We view the total installed base as a key metric of the growth of our business and is measured from period over period.

80

Presented below is a breakout of total Swoop systems installed during 2020 and 2021:

Commercial system installations reflect device sales and subscription services through commercial agreements (commercial sales) or through research transfer agreements ("RTA") sales. Commercial sales are made to hospitals and other healthcare providers as direct sales of devices and software subscription services or through subscriptions for the use of the device and software. RTA sales represent the sale of Swoop units for research use purposes. Our revenue for the years ended December 31, 2021, and 2020 is derived from commercial sales and RTA sales.

Grant fulfillment installations consist of shipments of Swoop units to hospitals and other clinical facilities designated by the Bill & Melinda Gates Foundation (“BMGF”). The corresponding funding for these installations from BMGF is recorded as a reduction in the research and development expenses when realized during the period.

Research units represent installed units, at no cost to the institutions, to expand clinical use cases. The installation of research units is recorded as a fixed asset with the related depreciation recorded as R&D expense over the life of the research unit.

Factors Affecting Results of Operations

The following factors have been important to our business and we expect them to impact our results of operations and financial condition in future periods:

Strategic partnerships and accelerated international expansion

We believe that market expansion is a key to our continued growth and the success of our device. In line with our vision to democratize healthcare imaging by providing affordable and accessible imaging of health conditions around the world, we are building an international sales strategy that includes direct sales to customers and sales through distribution partners in target regions. In 2021, we obtained a Medical Device License issued by Health Canada and expanded into the Canadian market. We recently also received regulatory authorization in New Zealand and Pakistan. In our plans for international commercial expansion, the other countries in which we plan initially to commercialize our Swoop system include, subject to the regulatory authorization, the United Kingdom and Australia. Through the Bill and Melinda Gates Foundation (“BMGF”) partnership, we are deploying Swoop systems in these target areas for research and clinical settings. The utilization of our Swoop systems as part of the programs will allow us to begin building relationships across key stakeholders in these countries or regions to better understand and meet required regulatory hurdles in anticipation of filing for regulatory authorization and ultimately expand into clinical use with patients. In addition, we are considering commercial expansion into several of the larger EU countries following our initial international commercial expansion. We believe these countries have the market size, regulatory environment, commercial access, and mature healthcare systems necessary, subject to regulatory authorization, for a successful launch of our Swoop system. We believe our partnership with the BMGF demonstrates our commitment to the vision of providing affordable and accessible imaging that enables earlier detection and remote management of health conditions around the world. Through our engagement with nonprofit organizations, we aim to deploy the Swoop system to low-middle resource settings without readily-accessible MRI technology. During 2020, we were awarded a $1.6 million grant from the BMGF for the provision and equipping of 20 sites with the Hyperfine portable point-of-care MRI system to enable the performance of a multi-site study focused on optimizing diagnostic image quality (the “Project”). During the third quarter of 2021, we were awarded an additional $3.3 million grant, of which $2.5 million was received from the BMGF in September 2021, with the remainder expected to be received by April 2022. Both of the grants are designed to support the deployment of a total of 25 Swoop devices and other services to investigators, which commenced in the spring of 2021, and is expected to fund the program for approximately two years. At December 31, 2021, 18 Swoop system units were provisioned and delivered to BMGF. These grants are designed to provide data to validate the use of our Swoop system in measuring the impact of maternal anemia, malnutrition, infection and birth related injury.

Technical innovation

We have developed our device through extensive research and development activities. Our Swoop system is designed to make the customer experience as easy as possible through our integrated, easy-to-use interface that portrays images on a

81

tablet, smartphone or other WiFi capable device. In addition to this design, our team is focused on customer success programs that help integrate the Swoop system into any hospital or clinic workflow. We believe that as the Swoop system becomes integrated into ICUs and sites across medical practices, we will gain more insights into our product’s usability and potentially develop automated analysis of images that we believe will lead to further efficiencies in patient diagnosis. We plan to continue developing our technology to expand into new imaging applications to enable us to reach the broader care continuum through diagnosis and treatment. In the future, we plan to introduce a further enhanced MRI system designed to conduct neuroimaging and imaging of other extremities for interventional procedures. In addition to our efforts to disrupt the MRI market, we see a significant opportunity to help patients in the neuromonitoring space. Although we expect these activities in technical innovation of the current device and new devices will increase our research and development expenses, we expect it to positively impact our results of operations and profitability in the future.

Description of Certain Components of Financial Data

Sales

We derive our sales from the following sources: device sales and service sales as described in more detail below. Our revenue recognition policies are discussed in more detail under “Summary of Significant Accounting Policies” in Note 2 to our combined and consolidated financial statements and notes thereto for the years ended December 31, 2021 and 2020 included elsewhere in this Annual Report on Form 10-K.

Device: Device sales primarily consist of sales of our MRI devices.

Service: Service sales primarily consists of sales from subscriptions of bundled devices, maintenance, and software.

Cost of sales

Cost of sales consists of product and service costs including personnel cost and benefits including stock-based compensation, product costs, production setup expenses, depreciation and amortization expenses, inventory excess and obsolescence expenses.

Research and development

Research and development costs consist of production costs for prototype, test and pre-production units, lab supplies, consulting and personnel costs, including salaries, stock-based compensation, bonuses and benefit costs. Most of our research and development expenses are related to developing new products and services as well as to enhance our current product and software capabilities. Consulting expenses are related to research and development activities as well as clinical and regulatory activities. Fabrication services include certain third-party engineering costs. Research and development expenses are expensed as incurred. We expect to continue to make substantial investments in product development. As a result, research and development expenses are expected to increase in absolute dollars as the research and development efforts increase.

General and administrative

General and administrative expenses primarily consist of personnel costs and benefits including stock-based compensation, patent and filing fees, office expenses, technology expenses and outside services. Outside services consist of professional services, legal and other professional fees. We expect that general and administrative expenses will increase in absolute dollars as a result of operating as a public company, including adding hires in accounting, human resources, and legal. Other related costs include additional facilities expenses and general corporate overhead to support the employee base.

Sales and marketing

Sales and marketing costs primarily consist of personnel costs and benefits including stock-based compensation, advertising, promotional costs, as well as costs for conferences, meetings, and other events. We expect sales and marketing expenses will increase in absolute dollars in the near term as we build our internal sales and marketing teams, promote our brand through marketing and advertising initiatives and expand our market presence and awareness.

Interest income

Interest income primarily consists of interest earned on our cash equivalents invested in money market securities.

82

Other expense, net

Other expense, net primarily relates to interest on a related party note payable.

Provision for income taxes

We utilize the asset and liability method of accounting for income taxes, as set forth in Accounting Standards Codification ("ASC") 740, Income Taxes. Under this method, deferred tax assets and liabilities are recognized for the expected future tax consequences of temporary differences between the carrying amounts and the tax basis of assets and liabilities using the enacted statutory tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. A valuation allowance is established against net deferred tax assets if, based on the weight of available evidence, it is more-likely-than-not that some or all of the net deferred tax assets will not be realized. We recorded a full valuation allowance as of December 31, 2021 and 2020. Based on available evidence, we believe that it is more-likely-than-not that we will be unable to utilize all of our deferred tax assets in the future.

On March 27, 2020, the Coronavirus Aid, Relief, and Economic Security Act ("CARES Act") was enacted which included provisions related to net operating loss ("NOL") carryovers and carrybacks. The CARES Act amended the NOL carryback rules by allowing NOLs arising in tax years beginning after December 31, 2017 and before January 1, 2021 to be carried back to each of the 5 years preceding the year of the loss to generate a refund of previously paid income taxes. In addition, the CARES Act temporarily removed the 80% limitation under which NOLs generated post-2017 could be used to offset no more than 80% of taxable income, and allows for full use of such NOLs for tax years before January 1, 2021. We have evaluated the relevant provisions of the CARES Act and have determined that we do not expect to recognize any benefit related to these provisions due to our net operating losses in the current year and all prior years. Therefore, there are no income tax effects to be recognized in the combined and consolidated financial statements for the years ended December 31, 2021 and 2020.

Results of Operations

The following is a discussion of our results of operations for the periods shown below, and our accounting policies are described under "Summary of Significant Accounting Policies" in Note 2 in our combined and consolidated financial statements for the years ended December 31, 2021 and 2020 included elsewhere in this Annual Report on Form 10-K.

83

Comparison of the Years Ended December 31, 2021 and 2020 ($ Amounts in thousands)

Sales

Total sales increased by $1.2 million, or 408.8%, for the year ended December 31, 2021 compared to the year ended December 31, 2020.

Device sales increased by $0.5 million, or 257.5%, for the year ended December 31, 2021 compared to the year ended December 31, 2020. This increase was driven by an increase in the volume of device sales. In the first quarter of 2022, we have taken a pricing action by increasing the price of the device while lowering the price of the annual subscription. We expect this pricing action will result in higher device revenue per unit and lower service revenue per unit for sales under the subscription plus ownership model beginning in the first quarter of 2022.

Service sales increased by $0.7 million, or 730.9%, for the year ended December 31, 2021 compared to the year ended December 31, 2020. This increase was driven by an increase in the volume of devices installed as generally all commercial systems installations generate service revenue. Service sales revenue is generally recognized over time as we are providing the customer with ongoing access to our resources throughout the subscription period. This type of revenue is recurring in nature and we expect will continue to grow as more devices are sold.

Cost of sales

Total cost of sales increased by $1.9 million, or 245.4%, for the year ended December 31, 2021 compared to the year ended December 31, 2020.

Cost of device sales increased by $1.3 million, or 169.7%, for the year ended December 31, 2021 compared to the year ended December 31, 2020. This increase was driven primarily by third party manufacturing costs as a result of increased volume of products sold. The increase is comprised of a $0.8 million increase in product hardware costs and a $0.5 million increase in internal overheads and labor costs mostly related to customer support and engineering as a result of an increase in the volume of products sold.

Cost of service sales increased by $0.6 million, for the year ended December 31, 2021 compared to the year ended December 31, 2020. This increase was driven primarily by $0.4 million increase in internal overheads and labor costs and a $0.2 million increase in depreciation of devices installed.

Research and development